zlib 1.2.7

crc_table is made using a four-byte integer (when that can be
determined).  However get_crc_table() returned a pointer to an
unsigned long, which could be eight bytes.  This fixes that by
creating a new z_crc_t type for the crc_table.

This type is also used for the BYFOUR crc calculations that depend
on a four-byte type.  The four-byte type can now be determined by
./configure, which also solves a problem where ./configure --solo
would never use BYFOUR.  No the Z_U4 #define indicates that four-
byte integer was found either by ./configure or by zconf.h.

CMakeLists.txt

@@ -3,9 +3,13 @@ set(CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS ON)
 
 project(zlib C)
 
-if(NOT DEFINED BUILD_SHARED_LIBS)
+set(VERSION "1.2.7")
-    option(BUILD_SHARED_LIBS "Build a shared library form of zlib" ON)
+
-endif()
+set(INSTALL_BIN_DIR "${CMAKE_INSTALL_PREFIX}/bin" CACHE PATH "Installation directory for executables")
+set(INSTALL_LIB_DIR "${CMAKE_INSTALL_PREFIX}/lib" CACHE PATH "Installation directory for libraries")
+set(INSTALL_INC_DIR "${CMAKE_INSTALL_PREFIX}/include" CACHE PATH "Installation directory for headers")
+set(INSTALL_MAN_DIR "${CMAKE_INSTALL_PREFIX}/share/man" CACHE PATH "Installation directory for manual pages")
+set(INSTALL_PKGCONFIG_DIR "${CMAKE_INSTALL_PREFIX}/share/pkgconfig" CACHE PATH "Installation directory for pkgconfig (.pc) files")
 
 include(CheckTypeSize)
 include(CheckFunctionExists)
@@ -56,23 +60,27 @@ if(MSVC)
     set(CMAKE_DEBUG_POSTFIX "d")
     add_definitions(-D_CRT_SECURE_NO_DEPRECATE)
     add_definitions(-D_CRT_NONSTDC_NO_DEPRECATE)
+    include_directories(${CMAKE_CURRENT_SOURCE_DIR})
 endif()
 
 if(NOT CMAKE_CURRENT_SOURCE_DIR STREQUAL CMAKE_CURRENT_BINARY_DIR)
     # If we're doing an out of source build and the user has a zconf.h
     # in their source tree...
     if(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h)
-        message(FATAL_ERROR
+        message(STATUS "Renaming")
-            "You must remove ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h "
+        message(STATUS "    ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h")
-            "from the source tree.  This file is included with zlib "
+        message(STATUS "to 'zconf.h.included' because this file is included with zlib")
-            "but CMake generates this file for you automatically "
+        message(STATUS "but CMake generates it automatically in the build directory.")
-            "in the build directory.")
+        file(RENAME ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h.included)
   endif()
 endif()
 
-configure_file(${CMAKE_CURRENT_SOURCE_DIR}/zconf.h.cmakein
+set(ZLIB_PC ${CMAKE_CURRENT_BINARY_DIR}/zlib.pc)
-               ${CMAKE_CURRENT_BINARY_DIR}/zconf.h @ONLY)
+configure_file( ${CMAKE_CURRENT_SOURCE_DIR}/zlib.pc.cmakein
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
+		${ZLIB_PC} @ONLY)
+configure_file(	${CMAKE_CURRENT_SOURCE_DIR}/zconf.h.cmakein
+		${CMAKE_CURRENT_BINARY_DIR}/zconf.h @ONLY)
+include_directories(${CMAKE_CURRENT_BINARY_DIR} ${CMAKE_SOURCE_DIR})
 
 
 #============================================================================
@@ -110,16 +118,25 @@ set(ZLIB_SRCS
     trees.c
     uncompr.c
     zutil.c
-    win32/zlib1.rc
 )
 
+if(NOT MINGW)
+    set(ZLIB_SRCS ${ZLIB_SRCS}
+        win32/zlib1.rc # If present will override custom build rule below.
+    )
+endif()
+
 # parse the full version number from zlib.h and include in ZLIB_FULL_VERSION
 file(READ ${CMAKE_CURRENT_SOURCE_DIR}/zlib.h _zlib_h_contents)
-string(REGEX REPLACE ".*#define[ \t]+ZLIB_VERSION[ \t]+\"([0-9A-Za-z.]+)\".*"
+string(REGEX REPLACE ".*#define[ \t]+ZLIB_VERSION[ \t]+\"([-0-9A-Za-z.]+)\".*"
     "\\1" ZLIB_FULL_VERSION ${_zlib_h_contents})
 
 if(MINGW)
     # This gets us DLL resource information when compiling on MinGW.
+    if(NOT CMAKE_RC_COMPILER)
+        SET(CMAKE_RC_COMPILER windres.exe)
+    endif()
+
     add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/zlib1rc.obj
                        COMMAND ${CMAKE_RC_COMPILER}
                             -D GCC_WINDRES
@@ -130,9 +147,9 @@ if(MINGW)
     set(ZLIB_SRCS ${ZLIB_SRCS} ${CMAKE_CURRENT_BINARY_DIR}/zlib1rc.obj)
 endif(MINGW)
 
-add_library(zlib ${ZLIB_SRCS} ${ZLIB_PUBLIC_HDRS} ${ZLIB_PRIVATE_HDRS})
+add_library(zlib SHARED ${ZLIB_SRCS} ${ZLIB_PUBLIC_HDRS} ${ZLIB_PRIVATE_HDRS})
+add_library(zlibstatic STATIC ${ZLIB_SRCS} ${ZLIB_PUBLIC_HDRS} ${ZLIB_PRIVATE_HDRS})
 set_target_properties(zlib PROPERTIES DEFINE_SYMBOL ZLIB_DLL)
-
 set_target_properties(zlib PROPERTIES SOVERSION 1)
 
 if(NOT CYGWIN)
@@ -148,23 +165,27 @@ endif()
 
 if(UNIX)
     # On unix-like platforms the library is almost always called libz
-   set_target_properties(zlib PROPERTIES OUTPUT_NAME z)
+   set_target_properties(zlib zlibstatic PROPERTIES OUTPUT_NAME z)
+   set_target_properties(zlib PROPERTIES LINK_FLAGS "-Wl,--version-script,${CMAKE_CURRENT_SOURCE_DIR}/zlib.map")
 elseif(BUILD_SHARED_LIBS AND WIN32)
     # Creates zlib1.dll when building shared library version
     set_target_properties(zlib PROPERTIES SUFFIX "1.dll")
 endif()
 
 if(NOT SKIP_INSTALL_LIBRARIES AND NOT SKIP_INSTALL_ALL )
-    install(TARGETS zlib
+    install(TARGETS zlib zlibstatic
-        RUNTIME DESTINATION bin
+        RUNTIME DESTINATION "${INSTALL_BIN_DIR}"
-        ARCHIVE DESTINATION lib
+        ARCHIVE DESTINATION "${INSTALL_LIB_DIR}"
-        LIBRARY DESTINATION lib )
+        LIBRARY DESTINATION "${INSTALL_LIB_DIR}" )
 endif()
 if(NOT SKIP_INSTALL_HEADERS AND NOT SKIP_INSTALL_ALL )
-    install(FILES ${ZLIB_PUBLIC_HDRS} DESTINATION include)
+    install(FILES ${ZLIB_PUBLIC_HDRS} DESTINATION "${INSTALL_INC_DIR}")
 endif()
 if(NOT SKIP_INSTALL_FILES AND NOT SKIP_INSTALL_ALL )
-    install(FILES zlib.3 DESTINATION share/man/man3)
+    install(FILES zlib.3 DESTINATION "${INSTALL_MAN_DIR}/man3")
+endif()
+if(NOT SKIP_INSTALL_FILES AND NOT SKIP_INSTALL_ALL )
+    install(FILES ${ZLIB_PC} DESTINATION "${INSTALL_PKGCONFIG_DIR}")
 endif()
 
 #============================================================================

ChangeLog

@@ -1,6 +1,110 @@
 
                 ChangeLog file for zlib
 
+Changes in 1.2.7 (2 May 2012)
+- Replace use of memmove() with a simple copy for portability
+- Test for existence of strerror
+- Restore gzgetc_ for backward compatibility with 1.2.6
+- Fix build with non-GNU make on Solaris
+- Require gcc 4.0 or later on Mac OS X to use the hidden attribute
+- Include unistd.h for Watcom C
+- Use __WATCOMC__ instead of __WATCOM__
+- Do not use the visibility attribute if NO_VIZ defined
+- Improve the detection of no hidden visibility attribute
+- Avoid using __int64 for gcc or solo compilation
+- Cast to char * in gzprintf to avoid warnings [Zinser]
+- Fix make_vms.com for VAX [Zinser]
+- Don't use library or built-in byte swaps
+- Simplify test and use of gcc hidden attribute
+- Fix bug in gzclose_w() when gzwrite() fails to allocate memory
+- Add "x" (O_EXCL) and "e" (O_CLOEXEC) modes support to gzopen()
+- Fix bug in test/minigzip.c for configure --solo
+- Fix contrib/vstudio project link errors [Mohanathas]
+- Add ability to choose the builder in make_vms.com [Schweda]
+- Add DESTDIR support to mingw32 win32/Makefile.gcc
+- Fix comments in win32/Makefile.gcc for proper usage
+- Allow overriding the default install locations for cmake
+- Generate and install the pkg-config file with cmake
+- Build both a static and a shared version of zlib with cmake
+- Include version symbols for cmake builds
+- If using cmake with MSVC, add the source directory to the includes
+- Remove unneeded EXTRA_CFLAGS from win32/Makefile.gcc [Truta]
+- Move obsolete emx makefile to old [Truta]
+- Allow the use of -Wundef when compiling or using zlib
+- Avoid the use of the -u option with mktemp
+- Improve inflate() documentation on the use of Z_FINISH
+- Recognize clang as gcc
+- Add gzopen_w() in Windows for wide character path names
+- Rename zconf.h in CMakeLists.txt to move it out of the way
+- Add source directory in CMakeLists.txt for building examples
+- Look in build directory for zlib.pc in CMakeLists.txt
+- Remove gzflags from zlibvc.def in vc9 and vc10
+- Fix contrib/minizip compilation in the MinGW environment
+- Update ./configure for Solaris, support --64 [Mooney]
+- Remove -R. from Solaris shared build (possible security issue)
+- Avoid race condition for parallel make (-j) running example
+- Fix type mismatch between get_crc_table() and crc_table
+- Fix parsing of version with "-" in CMakeLists.txt [Snider, Ziegler]
+- Fix the path to zlib.map in CMakeLists.txt
+- Force the native libtool in Mac OS X to avoid GNU libtool [Beebe]
+- Add instructions to win32/Makefile.gcc for shared install [Torri]
+
+Changes in 1.2.6.1 (12 Feb 2012)
+- Avoid the use of the Objective-C reserved name "id"
+- Include io.h in gzguts.h for Microsoft compilers
+- Fix problem with ./configure --prefix and gzgetc macro
+- Include gz_header definition when compiling zlib solo
+- Put gzflags() functionality back in zutil.c
+- Avoid library header include in crc32.c for Z_SOLO
+- Use name in GCC_CLASSIC as C compiler for coverage testing, if set
+- Minor cleanup in contrib/minizip/zip.c [Vollant]
+- Update make_vms.com [Zinser]
+- Remove unnecessary gzgetc_ function
+- Use optimized byte swap operations for Microsoft and GNU [Snyder]
+- Fix minor typo in zlib.h comments [Rzesniowiecki]
+
+Changes in 1.2.6 (29 Jan 2012)
+- Update the Pascal interface in contrib/pascal
+- Fix function numbers for gzgetc_ in zlibvc.def files
+- Fix configure.ac for contrib/minizip [Schiffer]
+- Fix large-entry detection in minizip on 64-bit systems [Schiffer]
+- Have ./configure use the compiler return code for error indication
+- Fix CMakeLists.txt for cross compilation [McClure]
+- Fix contrib/minizip/zip.c for 64-bit architectures [Dalsnes]
+- Fix compilation of contrib/minizip on FreeBSD [Marquez]
+- Correct suggested usages in win32/Makefile.msc [Shachar, Horvath]
+- Include io.h for Turbo C / Borland C on all platforms [Truta]
+- Make version explicit in contrib/minizip/configure.ac [Bosmans]
+- Avoid warning for no encryption in contrib/minizip/zip.c [Vollant]
+- Minor cleanup up contrib/minizip/unzip.c [Vollant]
+- Fix bug when compiling minizip with C++ [Vollant]
+- Protect for long name and extra fields in contrib/minizip [Vollant]
+- Avoid some warnings in contrib/minizip [Vollant]
+- Add -I../.. -L../.. to CFLAGS for minizip and miniunzip
+- Add missing libs to minizip linker command
+- Add support for VPATH builds in contrib/minizip
+- Add an --enable-demos option to contrib/minizip/configure
+- Add the generation of configure.log by ./configure
+- Exit when required parameters not provided to win32/Makefile.gcc
+- Have gzputc return the character written instead of the argument
+- Use the -m option on ldconfig for BSD systems [Tobias]
+- Correct in zlib.map when deflateResetKeep was added
+
+Changes in 1.2.5.3 (15 Jan 2012)
+- Restore gzgetc function for binary compatibility
+- Do not use _lseeki64 under Borland C++ [Truta]
+- Update win32/Makefile.msc to build test/*.c [Truta]
+- Remove old/visualc6 given CMakefile and other alternatives
+- Update AS400 build files and documentation [Monnerat]
+- Update win32/Makefile.gcc to build test/*.c [Truta]
+- Permit stronger flushes after Z_BLOCK flushes
+- Avoid extraneous empty blocks when doing empty flushes
+- Permit Z_NULL arguments to deflatePending
+- Allow deflatePrime() to insert bits in the middle of a stream
+- Remove second empty static block for Z_PARTIAL_FLUSH
+- Write out all of the available bits when using Z_BLOCK
+- Insert the first two strings in the hash table after a flush
+
 Changes in 1.2.5.2 (17 Dec 2011)
 - fix ld error: unable to find version dependency 'ZLIB_1.2.5'
 - use relative symlinks for shared libs

INDEX

@@ -17,6 +17,7 @@ zlib.3          Man page for zlib
 zlib.3.pdf      Man page in PDF format
 zlib.map        Linux symbol information
 zlib.pc.in      Template for pkg-config descriptor
+zlib.pc.cmakein zlib.pc template for cmake
 zlib2ansi       perl script to convert source files for C++ compilation
 
 amiga/          makefiles for Amiga SAS C

Makefile.in

@@ -32,7 +32,7 @@ CPP=$(CC) -E
 
 STATICLIB=libz.a
 SHAREDLIB=libz.so
-SHAREDLIBV=libz.so.1.2.5.2
+SHAREDLIBV=libz.so.1.2.7
 SHAREDLIBM=libz.so.1
 LIBS=$(STATICLIB) $(SHAREDLIBV)
 
@@ -53,7 +53,6 @@ includedir = ${prefix}/include
 mandir = ${prefix}/share/man
 man3dir = ${mandir}/man3
 pkgconfigdir = ${libdir}/pkgconfig
-tempfile := $(shell mktemp -u __XXXXXX)
 
 OBJZ = adler32.o crc32.o deflate.o infback.o inffast.o inflate.o inftrees.o trees.o zutil.o
 OBJG = compress.o uncompr.o gzclose.o gzlib.o gzread.o gzwrite.o
@@ -84,32 +83,35 @@ check: test
 test: all teststatic testshared
 
 teststatic: static
-	@if echo hello world | ./minigzip | ./minigzip -d && ./example; then \
+	@TMPST=`mktemp fooXXXXXX`; \
+	if echo hello world | ./minigzip | ./minigzip -d && ./example $$TMPST ; then \
 	  echo '		*** zlib test OK ***'; \
 	else \
 	  echo '		*** zlib test FAILED ***'; false; \
-	fi
+	fi; \
-	-@rm -f foo.gz
+	rm -f $$TMPST
 
 testshared: shared
 	@LD_LIBRARY_PATH=`pwd`:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
 	LD_LIBRARYN32_PATH=`pwd`:$(LD_LIBRARYN32_PATH) ; export LD_LIBRARYN32_PATH; \
 	DYLD_LIBRARY_PATH=`pwd`:$(DYLD_LIBRARY_PATH) ; export DYLD_LIBRARY_PATH; \
 	SHLIB_PATH=`pwd`:$(SHLIB_PATH) ; export SHLIB_PATH; \
-	if echo hello world | ./minigzipsh | ./minigzipsh -d && ./examplesh; then \
+	TMPSH=`mktemp fooXXXXXX`; \
+	if echo hello world | ./minigzipsh | ./minigzipsh -d && ./examplesh $$TMPSH; then \
 	  echo '		*** zlib shared test OK ***'; \
 	else \
 	  echo '		*** zlib shared test FAILED ***'; false; \
-	fi
+	fi; \
-	-@rm -f foo.gz
+	rm -f $$TMPSH
 
 test64: all64
-	@if echo hello world | ./minigzip64 | ./minigzip64 -d && ./example64; then \
+	@TMP64=`mktemp fooXXXXXX`; \
+	if echo hello world | ./minigzip64 | ./minigzip64 -d && ./example64 $$TMP64; then \
 	  echo '		*** zlib 64-bit test OK ***'; \
 	else \
 	  echo '		*** zlib 64-bit test FAILED ***'; false; \
-	fi
+	fi; \
-	-@rm -f foo.gz
+	rm -f $$TMP64
 
 infcover.o: test/infcover.c zlib.h zconf.h
 	$(CC) $(CFLAGS) -I. -c -o $@ test/infcover.c
@@ -228,10 +230,11 @@ zlib.3.pdf: zlib.3
 	groff -mandoc -f H -T ps zlib.3 | ps2pdf - zlib.3.pdf
 
 zconf.h.cmakein: zconf.h.in
-	-@echo "/#define ZCONF_H/ a\\\\\n#cmakedefine Z_PREFIX\\\\\n#cmakedefine Z_HAVE_UNISTD_H\n" > $(tempfile)
+	-@ TEMPFILE=`mktemp __XXXXXX`; \
-	-@sed -f $(tempfile) zconf.h.in > zconf.h.cmakein
+	echo "/#define ZCONF_H/ a\\\\\n#cmakedefine Z_PREFIX\\\\\n#cmakedefine Z_HAVE_UNISTD_H\n" >> $$TEMPFILE &&\
-	-@touch -r zconf.h.in zconf.h.cmakein
+	sed -f $$TEMPFILE zconf.h.in > zconf.h.cmakein &&\
-	-@rm $(tempfile)
+	touch -r zconf.h.in zconf.h.cmakein &&\
+	rm $$TEMPFILE
 
 zconf: zconf.h.in
 	cp -p zconf.h.in zconf.h
@@ -250,7 +253,7 @@ clean:
 
 maintainer-clean: distclean
 distclean: clean zconf zconf.h.cmakein docs
-	rm -f Makefile zlib.pc
+	rm -f Makefile zlib.pc configure.log
 	-@rm -f .DS_Store
 	-@printf 'all:\n\t-@echo "Please use ./configure first.  Thank you."\n' > Makefile
 	-@printf '\ndistclean:\n\tmake -f Makefile.in distclean\n' >> Makefile

README

@@ -1,6 +1,6 @@
 ZLIB DATA COMPRESSION LIBRARY
 
-zlib 1.2.5.2 is a general purpose data compression library.  All the code is
+zlib 1.2.7 is a general purpose data compression library.  All the code is
 thread safe.  The data format used by the zlib library is described by RFCs
 (Request for Comments) 1950 to 1952 in the files
 http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
@@ -31,7 +31,7 @@ Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan.  1997
 issue of Dr.  Dobb's Journal; a copy of the article is available at
 http://marknelson.us/1997/01/01/zlib-engine/ .
 
-The changes made in version 1.2.5.2 are documented in the file ChangeLog.
+The changes made in version 1.2.7 are documented in the file ChangeLog.
 
 Unsupported third party contributions are provided in directory contrib/ .
 
@@ -84,7 +84,7 @@ Acknowledgments:
 
 Copyright notice:
 
- (C) 1995-2011 Jean-loup Gailly and Mark Adler
+ (C) 1995-2012 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages

as400/bndsrc

@@ -33,9 +33,7 @@ STRPGMEXP PGMLVL(*CURRENT) SIGNATURE('ZLIB')
   EXPORT SYMBOL("deflateSetDictionary")
   EXPORT SYMBOL("deflateCopy")
   EXPORT SYMBOL("deflateReset")
-  EXPORT SYMBOL("deflateResetKeep")
   EXPORT SYMBOL("deflateParams")
-  EXPORT SYMBOL("deflatePending")
   EXPORT SYMBOL("deflatePrime")
   EXPORT SYMBOL("deflateInit_")
   EXPORT SYMBOL("deflateInit2_")
@@ -53,6 +51,7 @@ STRPGMEXP PGMLVL(*CURRENT) SIGNATURE('ZLIB')
   EXPORT SYMBOL("gzputs")
   EXPORT SYMBOL("gzgets")
   EXPORT SYMBOL("gzputc")
+  EXPORT SYMBOL("gzgetc")
   EXPORT SYMBOL("gzflush")
   EXPORT SYMBOL("gzseek")
   EXPORT SYMBOL("gzrewind")
@@ -170,8 +169,6 @@ STRPGMEXP PGMLVL(*CURRENT) SIGNATURE('ZLIB')
 /********************************************************************/
 
   EXPORT SYMBOL("gzclose_w")
-  EXPORT SYMBOL("gzgetc_")
-  EXPORT SYMBOL("gzflags")
 
 /********************************************************************/
 /*   *MODULE      INFLATE      ZLIB         01/02/01  00:15:09      */
@@ -181,6 +178,28 @@ STRPGMEXP PGMLVL(*CURRENT) SIGNATURE('ZLIB')
   EXPORT SYMBOL("inflatePrime")
   EXPORT SYMBOL("inflateReset2")
   EXPORT SYMBOL("inflateUndermine")
+
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+/*   Version 1.2.6 additional entry points.                         */
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+
+/********************************************************************/
+/*   *MODULE      DEFLATE      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("deflateResetKeep")
+  EXPORT SYMBOL("deflatePending")
+
+/********************************************************************/
+/*   *MODULE      GZWRITE      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("gzgetc_")
+
+/********************************************************************/
+/*   *MODULE      INFLATE      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
   EXPORT SYMBOL("inflateResetKeep")
 
 ENDPGMEXP

as400/compile.clp

@@ -105,6 +105,6 @@
                                  &MODLIB/TREES       &MODLIB/UNCOMPR     +
                                  &MODLIB/ZUTIL)                          +
                           SRCFILE(&SRCLIB/&CTLFILE) SRCMBR(BNDSRC)       +
-                          TEXT('ZLIB 1.2.5.2') TGTRLS(&TGTRLS)
+                          TEXT('ZLIB 1.2.7') TGTRLS(&TGTRLS)
 
              ENDPGM

as400/readme.txt

@@ -1,4 +1,4 @@
-        ZLIB version 1.2.5.2 for AS400 installation instructions
+        ZLIB version 1.2.7 for AS400 installation instructions
 
 I) From an AS400 *SAVF file:
 
@@ -8,7 +8,7 @@ On the AS400:
 
 _       Create the ZLIB AS400 library:
 
-        CRTLIB LIB(ZLIB) TYPE(PROD) TEXT('ZLIB compression API library')
+        CRTLIB LIB(ZLIB) TYPE(*PROD) TEXT('ZLIB compression API library')
 
 _       Create a work save file, for example:
 
@@ -52,7 +52,7 @@ II) From the original source distribution:
 
 1)      On the AS400, create the source library:
 
-        CRTLIB LIB(ZLIB) TYPE(PROD) TEXT('ZLIB compression API library')
+        CRTLIB LIB(ZLIB) TYPE(*PROD) TEXT('ZLIB compression API library')
 
 2)      Create the source files:
 

as400/zlib.inc

@@ -1,7 +1,7 @@
       *  ZLIB.INC - Interface to the general purpose compression library
       *
       *  ILE RPG400 version by Patrick Monnerat, DATASPHERE.
-      *  Version 1.2.5.2
+      *  Version 1.2.7
       *
       *
       *  WARNING:
@@ -22,12 +22,12 @@
       *
       *  Versioning information.
       *
-     D ZLIB_VERSION    C                   '1.2.5.2'
+     D ZLIB_VERSION    C                   '1.2.7'
-     D ZLIB_VERNUM     C                   X'1252'
+     D ZLIB_VERNUM     C                   X'1270'
      D ZLIB_VER_MAJOR  C                   1
      D ZLIB_VER_MINOR  C                   2
      D ZLIB_VER_REVISION...
-     D                 C                   5
+     D                 C                   7
      D ZLIB_VER_SUBREVISION...
      D                 C                   0
       *
@@ -111,15 +111,15 @@
       **************************************************************************
       *
      D compress        PR            10I 0 extproc('compress')
-     D  dest                      32767    options(*varsize)                    Destination buffer
+     D  dest                      65535    options(*varsize)                    Destination buffer
      D  destLen                      10U 0                                      Destination length
-     D  source                    32767    const options(*varsize)              Source buffer
+     D  source                    65535    const options(*varsize)              Source buffer
      D  sourceLen                    10u 0 value                                Source length
       *
      D compress2       PR            10I 0 extproc('compress2')
-     D  dest                      32767    options(*varsize)                    Destination buffer
+     D  dest                      65535    options(*varsize)                    Destination buffer
      D  destLen                      10U 0                                      Destination length
-     D  source                    32767    const options(*varsize)              Source buffer
+     D  source                    65535    const options(*varsize)              Source buffer
      D  sourceLen                    10U 0 value                                Source length
      D  level                        10I 0 value                                Compression level
       *
@@ -127,9 +127,9 @@
      D  sourceLen                    10U 0 value
       *
      D uncompress      PR            10I 0 extproc('uncompress')
-     D  dest                      32767    options(*varsize)                    Destination buffer
+     D  dest                      65535    options(*varsize)                    Destination buffer
      D  destLen                      10U 0                                      Destination length
-     D  source                    32767    const options(*varsize)              Source buffer
+     D  source                    65535    const options(*varsize)              Source buffer
      D  sourceLen                    10U 0 value                                Source length
       *
       /if not defined(LARGE_FILES)
@@ -165,12 +165,12 @@
       *
      D gzread          PR            10I 0 extproc('gzread')
      D  file                               value like(gzFile)                   File pointer
-     D  buf                       32767    options(*varsize)                    Buffer
+     D  buf                       65535    options(*varsize)                    Buffer
      D  len                          10u 0 value                                Buffer length
       *
      D gzwrite         PR            10I 0 extproc('gzwrite')
      D  file                               value like(gzFile)                   File pointer
-     D  buf                       32767    const options(*varsize)              Buffer
+     D  buf                       65535    const options(*varsize)              Buffer
      D  len                          10u 0 value                                Buffer length
       *
      D gzputs          PR            10I 0 extproc('gzputs')
@@ -179,13 +179,16 @@
       *
      D gzgets          PR              *   extproc('gzgets')
      D  file                               value like(gzFile)                   File pointer
-     D  buf                       32767    options(*varsize)                    Read buffer
+     D  buf                       65535    options(*varsize)                    Read buffer
      D  len                          10i 0 value                                Buffer length
       *
      D gzputc          PR            10i 0 extproc('gzputc')
      D  file                               value like(gzFile)                   File pointer
      D  c                            10I 0 value                                Character to write
       *
+     D gzgetc          PR            10i 0 extproc('gzgetc')
+     D  file                               value like(gzFile)                   File pointer
+      *
      D gzgetc_         PR            10i 0 extproc('gzgetc_')
      D  file                               value like(gzFile)                   File pointer
       *
@@ -315,7 +318,7 @@
      D deflateSetDictionary...
      D                 PR            10I 0 extproc('deflateSetDictionary')      Init. dictionary
      D  strm                               like(z_stream)                       Compression stream
-     D  dictionary                32767    const options(*varsize)              Dictionary bytes
+     D  dictionary                65535    const options(*varsize)              Dictionary bytes
      D  dictLength                   10U 0 value                                Dictionary length
       *
      D deflateCopy     PR            10I 0 extproc('deflateCopy')               Compress strm 2 strm
@@ -341,7 +344,7 @@
       *
      D deflatePrime    PR            10I 0 extproc('deflatePrime')              Change level & strat
      D  strm                               like(z_stream)                       Compression stream
-     D  bits                         10I 0 value                                Number of bits to insert
+     D  bits                         10I 0 value                                # of bits to insert
      D  value                        10I 0 value                                Bits to insert
       *
      D inflateInit2    PR            10I 0 extproc('inflateInit2_')             Init. expansion
@@ -353,7 +356,7 @@
      D inflateSetDictionary...
      D                 PR            10I 0 extproc('inflateSetDictionary')      Init. dictionary
      D  strm                               like(z_stream)                       Expansion stream
-     D  dictionary                32767    const options(*varsize)              Dictionary bytes
+     D  dictionary                65535    const options(*varsize)              Dictionary bytes
      D  dictLength                   10U 0 value                                Dictionary length
       *
      D inflateSync     PR            10I 0 extproc('inflateSync')               Sync. expansion
@@ -382,7 +385,7 @@
      D                 PR            10I 0 extproc('inflateBackInit_')
      D  strm                               like(z_stream)                       Expansion stream
      D  windowBits                   10I 0 value                                Log2(buffer size)
-     D  window                    32767    options(*varsize)                    Buffer
+     D  window                    65535    options(*varsize)                    Buffer
      D  version                        *   value options(*string)               Version string
      D  stream_size                  10i 0 value                                Stream struct. size
       *
@@ -405,12 +408,12 @@
       *
      D adler32         PR            10U 0 extproc('adler32')                   New checksum
      D  adler                        10U 0 value                                Old checksum
-     D  buf                       32767    const options(*varsize)              Bytes to accumulate
+     D  buf                       65535    const options(*varsize)              Bytes to accumulate
      D  len                          10U 0 value                                Buffer length
       *
      D crc32           PR            10U 0 extproc('crc32')                     New checksum
      D  crc                          10U 0 value                                Old checksum
-     D  buf                       32767    const options(*varsize)              Bytes to accumulate
+     D  buf                       65535    const options(*varsize)              Bytes to accumulate
      D  len                          10U 0 value                                Buffer length
       *
       **************************************************************************
@@ -439,6 +442,4 @@
      D                 PR            10I 0 extproc('deflateResetKeep')          End and init. stream
      D  strm                               like(z_stream)                       Expansion stream
       *
-     D gzflags         PR            10U 0 extproc('gzflags')
-      *
       /endif

configure

@@ -13,36 +13,49 @@
 # If you have problems, try without defining CC and CFLAGS before reporting
 # an error.
 
+# start off configure.log
+echo -------------------- >> configure.log
+echo $0 $* >> configure.log
+date >> configure.log
+
+# set command prefix for cross-compilation
 if [ -n "${CHOST}" ]; then
     uname="`echo "${CHOST}" | sed -e 's/^[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)-.*$/\1/'`"
     CROSS_PREFIX="${CHOST}-"
 fi
 
+# destination name for static library
 STATICLIB=libz.a
+
+# extract zlib version numbers from zlib.h
 VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`
 VER3=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\\.[0-9]*\).*/\1/p' < zlib.h`
 VER2=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\)\\..*/\1/p' < zlib.h`
 VER1=`sed -n -e '/VERSION "/s/.*"\([0-9]*\)\\..*/\1/p' < zlib.h`
+
+# establish commands for library building
 if "${CROSS_PREFIX}ar" --version >/dev/null 2>/dev/null || test $? -lt 126; then
     AR=${AR-"${CROSS_PREFIX}ar"}
-    test -n "${CROSS_PREFIX}" && echo Using ${AR}
+    test -n "${CROSS_PREFIX}" && echo Using ${AR} | tee -a configure.log
 else
     AR=${AR-"ar"}
-    test -n "${CROSS_PREFIX}" && echo Using ${AR}
+    test -n "${CROSS_PREFIX}" && echo Using ${AR} | tee -a configure.log
 fi
 ARFLAGS=${ARFLAGS-"rc"}
 if "${CROSS_PREFIX}ranlib" --version >/dev/null 2>/dev/null || test $? -lt 126; then
     RANLIB=${RANLIB-"${CROSS_PREFIX}ranlib"}
-    test -n "${CROSS_PREFIX}" && echo Using ${RANLIB}
+    test -n "${CROSS_PREFIX}" && echo Using ${RANLIB} | tee -a configure.log
 else
     RANLIB=${RANLIB-"ranlib"}
 fi
 if "${CROSS_PREFIX}nm" --version >/dev/null 2>/dev/null || test $? -lt 126; then
     NM=${NM-"${CROSS_PREFIX}nm"}
-    test -n "${CROSS_PREFIX}" && echo Using ${NM}
+    test -n "${CROSS_PREFIX}" && echo Using ${NM} | tee -a configure.log
 else
     NM=${NM-"nm"}
 fi
+
+# set defaults before processing command line options
 LDCONFIG=${LDCONFIG-"ldconfig"}
 LDSHAREDLIBC="${LDSHAREDLIBC--lc}"
 ARCHS=
@@ -64,14 +77,15 @@ old_cflags="$CFLAGS"
 OBJC='$(OBJZ) $(OBJG)'
 PIC_OBJC='$(PIC_OBJZ) $(PIC_OBJG)'
 
+# process command line options
 while test $# -ge 1
 do
 case "$1" in
     -h* | --help)
-      echo 'usage:'
+      echo 'usage:' | tee -a configure.log
-      echo '  configure [--zprefix] [--prefix=PREFIX]  [--eprefix=EXPREFIX]'
+      echo '  configure [--zprefix] [--prefix=PREFIX]  [--eprefix=EXPREFIX]' | tee -a configure.log
-      echo '    [--static] [--64] [--libdir=LIBDIR] [--sharedlibdir=LIBDIR]'
+      echo '    [--static] [--64] [--libdir=LIBDIR] [--sharedlibdir=LIBDIR]' | tee -a configure.log
-      echo '    [--includedir=INCLUDEDIR] [--archs="-arch i386 -arch x86_64"]'
+      echo '    [--includedir=INCLUDEDIR] [--archs="-arch i386 -arch x86_64"]' | tee -a configure.log
         exit 0 ;;
     -p*=* | --prefix=*) prefix=`echo $1 | sed 's/.*=//'`; shift ;;
     -e*=* | --eprefix=*) exec_prefix=`echo $1 | sed 's/.*=//'`; shift ;;
@@ -90,30 +104,84 @@ case "$1" in
     -z* | --zprefix) zprefix=1; shift ;;
     -6* | --64) build64=1; shift ;;
     -a*=* | --archs=*) ARCHS=`echo $1 | sed 's/.*=//'`; shift ;;
-    --sysconfdir=*) echo "ignored option: --sysconfdir"; shift ;;
+    --sysconfdir=*) echo "ignored option: --sysconfdir" | tee -a configure.log; shift ;;
-    --localstatedir=*) echo "ignored option: --localstatedir"; shift ;;
+    --localstatedir=*) echo "ignored option: --localstatedir" | tee -a configure.log; shift ;;
-    *) echo "unknown option: $1"; echo "$0 --help for help"; exit 1 ;;
+    *) echo "unknown option: $1"; echo "$0 --help for help" | tee -a configure.log; exit 1 ;;
     esac
 done
 
+# define functions for testing compiler and library characteristics and logging the results
 test=ztest$$
+
+show()
+{
+  case "$*" in
+    *$test.c*)
+      echo === $test.c === >> configure.log
+      cat $test.c >> configure.log
+      echo === >> configure.log;;
+  esac
+  echo $* >> configure.log
+}
+
+cat > $test.c <<EOF
+#error error
+EOF
+if ($CC -c $CFLAGS $test.c) 2>/dev/null; then
+  try()
+  {
+    show $*
+    test "`( $* ) 2>&1 | tee -a configure.log`" = ""
+  }
+  echo - using any output from compiler to indicate an error >> configure.log
+else
+  try()
+  {
+    show $*
+    ( $* ) >> configure.log 2>&1
+    ret=$?
+    if test $ret -ne 0; then
+      echo "(exit code "$ret")" >> configure.log
+    fi
+    return $ret
+  }
+fi
+
+tryboth()
+{
+  show $*
+  got=`( $* ) 2>&1`
+  ret=$?
+  printf %s "$got" >> configure.log
+  if test $ret -ne 0; then
+    return $ret
+  fi
+  test "$got" = ""
+}
+
+echo >> configure.log
+
+# check for gcc vs. cc and set compile and link flags based on the system identified by uname
 cat > $test.c <<EOF
 extern int getchar();
 int hello() {return getchar();}
 EOF
 
-test -z "$CC" && echo Checking for ${CROSS_PREFIX}gcc...
+test -z "$CC" && echo Checking for ${CROSS_PREFIX}gcc... | tee -a configure.log
 cc=${CC-${CROSS_PREFIX}gcc}
 cflags=${CFLAGS-"-O3"}
 # to force the asm version use: CFLAGS="-O3 -DASMV" ./configure
 case "$cc" in
   *gcc*) gcc=1 ;;
+  *clang*) gcc=1 ;;
 esac
 case `$cc -v 2>&1` in
   *gcc*) gcc=1 ;;
 esac
 
-if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
+show $cc -c $cflags $test.c
+if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) >> configure.log 2>&1; then
+  echo ... using gcc >> configure.log
   CC="$cc"
   CFLAGS="${CFLAGS--O3} ${ARCHS}"
   SFLAGS="${CFLAGS--O3} -fPIC"
@@ -129,14 +197,17 @@ if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
     uname=`(uname -s || echo unknown) 2>/dev/null`
   fi
   case "$uname" in
-  Linux* | linux* | GNU | GNU/* | *BSD | *bsd* | DragonFly | solaris*)
+  Linux* | linux* | GNU | GNU/* | solaris*)
         LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map"} ;;
+  *BSD | *bsd* | DragonFly)
+        LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map"}
+        LDCONFIG="ldconfig -m" ;;
   CYGWIN* | Cygwin* | cygwin* | OS/2*)
         EXE='.exe' ;;
   MINGW* | mingw*)
 # temporary bypass
         rm -f $test.[co] $test $test$shared_ext
-        echo "Please use win32/Makefile.gcc instead."
+        echo "Please use win32/Makefile.gcc instead." | tee -a configure.log
         exit 1
         LDSHARED=${LDSHARED-"$cc -shared"}
         LDSHAREDLIBC=""
@@ -160,7 +231,7 @@ if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
              SHAREDLIBV=libz.$VER$shared_ext
              SHAREDLIBM=libz.$VER1$shared_ext
              LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER3"}
-             AR="libtool"
+             AR="/usr/bin/libtool"
              ARFLAGS="-o" ;;
   *)             LDSHARED=${LDSHARED-"$cc -shared"} ;;
   esac
@@ -168,6 +239,7 @@ else
   # find system name and corresponding cc options
   CC=${CC-cc}
   gcc=0
+  echo ... using $CC >> configure.log
   if test -z "$uname"; then
     uname=`(uname -sr || echo unknown) 2>/dev/null`
   fi
@@ -204,15 +276,28 @@ else
              CFLAGS=${CFLAGS-"-O3"}
              LDSHARED=${LDSHARED-"cc -dy -KPIC -G"} ;;
   SunOS\ 5* | solaris*)
-         LDSHARED=${LDSHARED-"cc -G"}
+         LDSHARED=${LDSHARED-"cc -G -h libz$shared_ext.$VER1"}
-         case `(uname -m || echo unknown) 2>/dev/null` in
+         SFLAGS=${CFLAGS-"-fast -KPIC"}
-         i86*)
+         CFLAGS=${CFLAGS-"-fast"}
-             SFLAGS=${CFLAGS-"-xpentium -fast -KPIC -R."}
+         if test $build64 -eq 1; then
-             CFLAGS=${CFLAGS-"-xpentium -fast"} ;;
+             # old versions of SunPRO/Workshop/Studio don't support -m64,
-         *)
+             # but newer ones do.  Check for it.
-             SFLAGS=${CFLAGS-"-fast -xcg92 -KPIC -R."}
+             flag64=`$CC -flags | egrep -- '^-m64'`
-             CFLAGS=${CFLAGS-"-fast -xcg92"} ;;
+             if test x"$flag64" != x"" ; then
-         esac ;;
+                 CFLAGS="${CFLAGS} -m64"
+                 SFLAGS="${SFLAGS} -m64"
+             else
+                 case `(uname -m || echo unknown) 2>/dev/null` in
+                   i86*)
+                     SFLAGS="$SFLAGS -xarch=amd64"
+                     CFLAGS="$CFLAGS -xarch=amd64" ;;
+                   *)
+                     SFLAGS="$SFLAGS -xarch=v9"
+                     CFLAGS="$CFLAGS -xarch=v9" ;;
+                 esac
+             fi
+         fi
+         ;;
   SunOS\ 4*) SFLAGS=${CFLAGS-"-O2 -PIC"}
              CFLAGS=${CFLAGS-"-O2"}
              LDSHARED=${LDSHARED-"ld"} ;;
@@ -242,25 +327,25 @@ else
   esac
 fi
 
+# destination names for shared library if not defined above
 SHAREDLIB=${SHAREDLIB-"libz$shared_ext"}
 SHAREDLIBV=${SHAREDLIBV-"libz$shared_ext.$VER"}
 SHAREDLIBM=${SHAREDLIBM-"libz$shared_ext.$VER1"}
 
+echo >> configure.log
+
+# see if shared library build supported
 if test $shared -eq 1; then
-  echo Checking for shared library support...
+  echo Checking for shared library support... | tee -a configure.log
   # we must test in two steps (cc then ld), required at least on SunOS 4.x
-  if test "`($CC -w -c $SFLAGS $test.c) 2>&1`" = "" &&
+  if try $CC -w -c $SFLAGS $test.c &&
-     test "`($LDSHARED $SFLAGS -o $test$shared_ext $test.o) 2>&1`" = ""; then
+     try $LDSHARED $SFLAGS -o $test$shared_ext $test.o; then
-    echo Building shared library $SHAREDLIBV with $CC.
+    echo Building shared library $SHAREDLIBV with $CC. | tee -a configure.log
   elif test -z "$old_cc" -a -z "$old_cflags"; then
-    echo No shared library support.
+    echo No shared library support. | tee -a configure.log
     shared=0;
   else
-    echo Tested $CC -w -c $SFLAGS $test.c
+    echo 'No shared library support; try without defining CC and CFLAGS' | tee -a configure.log
-    $CC -w -c $SFLAGS $test.c
-    echo Tested $LDSHARED $SFLAGS -o $test$shared_ext $test.o
-    $LDSHARED $SFLAGS -o $test$shared_ext $test.o
-    echo 'No shared library support; try without defining CC and CFLAGS'
     shared=0;
   fi
 fi
@@ -271,25 +356,45 @@ if test $shared -eq 0; then
   SHAREDLIB=""
   SHAREDLIBV=""
   SHAREDLIBM=""
-  echo Building static library $STATICLIB version $VER with $CC.
+  echo Building static library $STATICLIB version $VER with $CC. | tee -a configure.log
 else
   ALL="static shared"
   TEST="all teststatic testshared"
 fi
 
+echo >> configure.log
+
+# check for underscores in external names for use by assembler code
+CPP=${CPP-"$CC -E"}
+case $CFLAGS in
+  *ASMV*)
+    echo >> configure.log
+    show "$NM $test.o | grep _hello"
+    if test "`$NM $test.o | grep _hello | tee -a configure.log`" = ""; then
+      CPP="$CPP -DNO_UNDERLINE"
+      echo Checking for underline in external names... No. | tee -a configure.log
+    else
+      echo Checking for underline in external names... Yes. | tee -a configure.log
+    fi ;;
+esac
+
+echo >> configure.log
+
+# check for large file support, and if none, check for fseeko()
 cat > $test.c <<EOF
 #include <sys/types.h>
 off64_t dummy = 0;
 EOF
-if test "`($CC -c $CFLAGS -D_LARGEFILE64_SOURCE=1 $test.c) 2>&1`" = ""; then
+if try $CC -c $CFLAGS -D_LARGEFILE64_SOURCE=1 $test.c; then
   CFLAGS="${CFLAGS} -D_LARGEFILE64_SOURCE=1"
   SFLAGS="${SFLAGS} -D_LARGEFILE64_SOURCE=1"
   ALL="${ALL} all64"
   TEST="${TEST} test64"
-  echo "Checking for off64_t... Yes."
+  echo "Checking for off64_t... Yes." | tee -a configure.log
-  echo "Checking for fseeko... Yes."
+  echo "Checking for fseeko... Yes." | tee -a configure.log
 else
-  echo "Checking for off64_t... No."
+  echo "Checking for off64_t... No." | tee -a configure.log
+  echo >> configure.log
   cat > $test.c <<EOF
 #include <stdio.h>
 int main(void) {
@@ -297,47 +402,73 @@ int main(void) {
   return 0;
 }
 EOF
-  if test "`($CC $CFLAGS -o $test $test.c) 2>&1`" = ""; then
+  if try $CC $CFLAGS -o $test $test.c; then
-    echo "Checking for fseeko... Yes."
+    echo "Checking for fseeko... Yes." | tee -a configure.log
   else
     CFLAGS="${CFLAGS} -DNO_FSEEKO"
     SFLAGS="${SFLAGS} -DNO_FSEEKO"
-    echo "Checking for fseeko... No."
+    echo "Checking for fseeko... No." | tee -a configure.log
   fi
 fi
 
+echo >> configure.log
+
+# check for strerror() for use by gz* functions
+cat > $test.c <<EOF
+#include <string.h>
+#include <errno.h>
+int main() { return strlen(strerror(errno)); }
+EOF
+if try $CC $CFLAGS -o $test $test.c; then
+  echo "Checking for strerror... Yes." | tee -a configure.log
+else
+  CFLAGS="${CFLAGS} -DNO_STRERROR"
+  SFLAGS="${SFLAGS} -DNO_STRERROR"
+  echo "Checking for strerror... No." | tee -a configure.log
+fi
+
+# copy clean zconf.h for subsequent edits
 cp -p zconf.h.in zconf.h
 
+echo >> configure.log
+
+# check for unistd.h and save result in zconf.h
 cat > $test.c <<EOF
 #include <unistd.h>
 int main() { return 0; }
 EOF
-if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+if try $CC -c $CFLAGS $test.c; then
   sed < zconf.h "/^#ifdef HAVE_UNISTD_H.* may be/s/def HAVE_UNISTD_H\(.*\) may be/ 1\1 was/" > zconf.temp.h
   mv zconf.temp.h zconf.h
-  echo "Checking for unistd.h... Yes."
+  echo "Checking for unistd.h... Yes." | tee -a configure.log
 else
-  echo "Checking for unistd.h... No."
+  echo "Checking for unistd.h... No." | tee -a configure.log
 fi
 
+echo >> configure.log
+
+# check for stdarg.h and save result in zconf.h
 cat > $test.c <<EOF
 #include <stdarg.h>
 int main() { return 0; }
 EOF
-if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+if try $CC -c $CFLAGS $test.c; then
   sed < zconf.h "/^#ifdef HAVE_STDARG_H.* may be/s/def HAVE_STDARG_H\(.*\) may be/ 1\1 was/" > zconf.temp.h
   mv zconf.temp.h zconf.h
-  echo "Checking for stdarg.h... Yes."
+  echo "Checking for stdarg.h... Yes." | tee -a configure.log
 else
-  echo "Checking for stdarg.h... No."
+  echo "Checking for stdarg.h... No." | tee -a configure.log
 fi
 
+# if the z_ prefix was requested, save that in zconf.h
 if test $zprefix -eq 1; then
   sed < zconf.h "/#ifdef Z_PREFIX.* may be/s/def Z_PREFIX\(.*\) may be/ 1\1 was/" > zconf.temp.h
   mv zconf.temp.h zconf.h
-  echo "Using z_ prefix on all symbols."
+  echo >> configure.log
+  echo "Using z_ prefix on all symbols." | tee -a configure.log
 fi
 
+# if --solo compilation was requested, save that in zconf.h and remove gz stuff from object lists
 if test $solo -eq 1; then
   sed '/#define ZCONF_H/a\
 #define Z_SOLO
@@ -348,246 +479,290 @@ OBJC='$(OBJZ)'
 PIC_OBJC='$(PIC_OBJZ)'
 fi
 
+# if code coverage testing was requested, use older gcc if defined, e.g. "gcc-4.2" on Mac OS X
 if test $cover -eq 1; then
   CFLAGS="${CFLAGS} -fprofile-arcs -ftest-coverage"
+  if test -n "$GCC_CLASSIC"; then
+    CC=$GCC_CLASSIC
+  fi
 fi
 
+echo >> configure.log
+
+# conduct a series of tests to resolve eight possible cases of using "vs" or "s" printf functions
+# (using stdarg or not), with or without "n" (proving size of buffer), and with or without a
+# return value.  The most secure result is vsnprintf() with a return value.  snprintf() with a
+# return value is secure as well, but then gzprintf() will be limited to 20 arguments.
 cat > $test.c <<EOF
 #include <stdio.h>
 #include <stdarg.h>
 #include "zconf.h"
-
 int main()
 {
 #ifndef STDC
   choke me
 #endif
-
   return 0;
 }
 EOF
+if try $CC -c $CFLAGS $test.c; then
+  echo "Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf()." | tee -a configure.log
 
-if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+  echo >> configure.log
-  echo "Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf()."
-
   cat > $test.c <<EOF
 #include <stdio.h>
 #include <stdarg.h>
-
 int mytest(const char *fmt, ...)
 {
   char buf[20];
   va_list ap;
-
   va_start(ap, fmt);
   vsnprintf(buf, sizeof(buf), fmt, ap);
   va_end(ap);
   return 0;
 }
-
 int main()
 {
   return (mytest("Hello%d\n", 1));
 }
 EOF
-  if test "`($CC $CFLAGS -o $test $test.c) 2>&1`" = ""; then
+  if try $CC $CFLAGS -o $test $test.c; then
-    echo "Checking for vsnprintf() in stdio.h... Yes."
+    echo "Checking for vsnprintf() in stdio.h... Yes." | tee -a configure.log
 
+    echo >> configure.log
     cat >$test.c <<EOF
 #include <stdio.h>
 #include <stdarg.h>
-
 int mytest(const char *fmt, ...)
 {
   int n;
   char buf[20];
   va_list ap;
-
   va_start(ap, fmt);
   n = vsnprintf(buf, sizeof(buf), fmt, ap);
   va_end(ap);
   return n;
 }
-
 int main()
 {
   return (mytest("Hello%d\n", 1));
 }
 EOF
 
-    if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+    if try $CC -c $CFLAGS $test.c; then
-      echo "Checking for return value of vsnprintf()... Yes."
+      echo "Checking for return value of vsnprintf()... Yes." | tee -a configure.log
     else
       CFLAGS="$CFLAGS -DHAS_vsnprintf_void"
       SFLAGS="$SFLAGS -DHAS_vsnprintf_void"
-      echo "Checking for return value of vsnprintf()... No."
+      echo "Checking for return value of vsnprintf()... No." | tee -a configure.log
-      echo "  WARNING: apparently vsnprintf() does not return a value. zlib"
+      echo "  WARNING: apparently vsnprintf() does not return a value. zlib" | tee -a configure.log
-      echo "  can build but will be open to possible string-format security"
+      echo "  can build but will be open to possible string-format security" | tee -a configure.log
-      echo "  vulnerabilities."
+      echo "  vulnerabilities." | tee -a configure.log
     fi
   else
     CFLAGS="$CFLAGS -DNO_vsnprintf"
     SFLAGS="$SFLAGS -DNO_vsnprintf"
-    echo "Checking for vsnprintf() in stdio.h... No."
+    echo "Checking for vsnprintf() in stdio.h... No." | tee -a configure.log
-    echo "  WARNING: vsnprintf() not found, falling back to vsprintf(). zlib"
+    echo "  WARNING: vsnprintf() not found, falling back to vsprintf(). zlib" | tee -a configure.log
-    echo "  can build but will be open to possible buffer-overflow security"
+    echo "  can build but will be open to possible buffer-overflow security" | tee -a configure.log
-    echo "  vulnerabilities."
+    echo "  vulnerabilities." | tee -a configure.log
 
+    echo >> configure.log
     cat >$test.c <<EOF
 #include <stdio.h>
 #include <stdarg.h>
-
 int mytest(const char *fmt, ...)
 {
   int n;
   char buf[20];
   va_list ap;
-
   va_start(ap, fmt);
   n = vsprintf(buf, fmt, ap);
   va_end(ap);
   return n;
 }
-
 int main()
 {
   return (mytest("Hello%d\n", 1));
 }
 EOF
 
-    if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+    if try $CC -c $CFLAGS $test.c; then
-      echo "Checking for return value of vsprintf()... Yes."
+      echo "Checking for return value of vsprintf()... Yes." | tee -a configure.log
     else
       CFLAGS="$CFLAGS -DHAS_vsprintf_void"
       SFLAGS="$SFLAGS -DHAS_vsprintf_void"
-      echo "Checking for return value of vsprintf()... No."
+      echo "Checking for return value of vsprintf()... No." | tee -a configure.log
-      echo "  WARNING: apparently vsprintf() does not return a value. zlib"
+      echo "  WARNING: apparently vsprintf() does not return a value. zlib" | tee -a configure.log
-      echo "  can build but will be open to possible string-format security"
+      echo "  can build but will be open to possible string-format security" | tee -a configure.log
-      echo "  vulnerabilities."
+      echo "  vulnerabilities." | tee -a configure.log
     fi
   fi
 else
-  echo "Checking whether to use vs[n]printf() or s[n]printf()... using s[n]printf()."
+  echo "Checking whether to use vs[n]printf() or s[n]printf()... using s[n]printf()." | tee -a configure.log
 
+  echo >> configure.log
   cat >$test.c <<EOF
 #include <stdio.h>
-
 int mytest()
 {
   char buf[20];
-
   snprintf(buf, sizeof(buf), "%s", "foo");
   return 0;
 }
-
 int main()
 {
   return (mytest());
 }
 EOF
 
-  if test "`($CC $CFLAGS -o $test $test.c) 2>&1`" = ""; then
+  if try $CC $CFLAGS -o $test $test.c; then
-    echo "Checking for snprintf() in stdio.h... Yes."
+    echo "Checking for snprintf() in stdio.h... Yes." | tee -a configure.log
 
+    echo >> configure.log
     cat >$test.c <<EOF
 #include <stdio.h>
-
 int mytest()
 {
   char buf[20];
-
   return snprintf(buf, sizeof(buf), "%s", "foo");
 }
-
 int main()
 {
   return (mytest());
 }
 EOF
 
-    if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+    if try $CC -c $CFLAGS $test.c; then
-      echo "Checking for return value of snprintf()... Yes."
+      echo "Checking for return value of snprintf()... Yes." | tee -a configure.log
     else
       CFLAGS="$CFLAGS -DHAS_snprintf_void"
       SFLAGS="$SFLAGS -DHAS_snprintf_void"
-      echo "Checking for return value of snprintf()... No."
+      echo "Checking for return value of snprintf()... No." | tee -a configure.log
-      echo "  WARNING: apparently snprintf() does not return a value. zlib"
+      echo "  WARNING: apparently snprintf() does not return a value. zlib" | tee -a configure.log
-      echo "  can build but will be open to possible string-format security"
+      echo "  can build but will be open to possible string-format security" | tee -a configure.log
-      echo "  vulnerabilities."
+      echo "  vulnerabilities." | tee -a configure.log
     fi
   else
     CFLAGS="$CFLAGS -DNO_snprintf"
     SFLAGS="$SFLAGS -DNO_snprintf"
-    echo "Checking for snprintf() in stdio.h... No."
+    echo "Checking for snprintf() in stdio.h... No." | tee -a configure.log
-    echo "  WARNING: snprintf() not found, falling back to sprintf(). zlib"
+    echo "  WARNING: snprintf() not found, falling back to sprintf(). zlib" | tee -a configure.log
-    echo "  can build but will be open to possible buffer-overflow security"
+    echo "  can build but will be open to possible buffer-overflow security" | tee -a configure.log
-    echo "  vulnerabilities."
+    echo "  vulnerabilities." | tee -a configure.log
 
+    echo >> configure.log
     cat >$test.c <<EOF
 #include <stdio.h>
-
 int mytest()
 {
   char buf[20];
-
   return sprintf(buf, "%s", "foo");
 }
-
 int main()
 {
   return (mytest());
 }
 EOF
 
-    if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+    if try $CC -c $CFLAGS $test.c; then
-      echo "Checking for return value of sprintf()... Yes."
+      echo "Checking for return value of sprintf()... Yes." | tee -a configure.log
     else
       CFLAGS="$CFLAGS -DHAS_sprintf_void"
       SFLAGS="$SFLAGS -DHAS_sprintf_void"
-      echo "Checking for return value of sprintf()... No."
+      echo "Checking for return value of sprintf()... No." | tee -a configure.log
-      echo "  WARNING: apparently sprintf() does not return a value. zlib"
+      echo "  WARNING: apparently sprintf() does not return a value. zlib" | tee -a configure.log
-      echo "  can build but will be open to possible string-format security"
+      echo "  can build but will be open to possible string-format security" | tee -a configure.log
-      echo "  vulnerabilities."
+      echo "  vulnerabilities." | tee -a configure.log
     fi
   fi
 fi
 
+# see if we can hide zlib internal symbols that are linked between separate source files
 if test "$gcc" -eq 1; then
+  echo >> configure.log
   cat > $test.c <<EOF
-#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33)
+#define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
-#  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
-#else
-#  define ZLIB_INTERNAL
-#endif
 int ZLIB_INTERNAL foo;
 int main()
 {
   return 0;
 }
 EOF
-  if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+  if tryboth $CC -c $CFLAGS $test.c; then
-    echo "Checking for attribute(visibility) support... Yes."
+    CFLAGS="$CFLAGS -DHAVE_HIDDEN"
+    SFLAGS="$SFLAGS -DHAVE_HIDDEN"
+    echo "Checking for attribute(visibility) support... Yes." | tee -a configure.log
   else
-    CFLAGS="$CFLAGS -DNO_VIZ"
+    echo "Checking for attribute(visibility) support... No." | tee -a configure.log
-    SFLAGS="$SFLAGS -DNO_VIZ"
-    echo "Checking for attribute(visibility) support... No."
   fi
 fi
 
-CPP=${CPP-"$CC -E"}
+echo >> configure.log
-case $CFLAGS in
-  *ASMV*)
-    if test "`$NM $test.o | grep _hello`" = ""; then
-      CPP="$CPP -DNO_UNDERLINE"
-      echo Checking for underline in external names... No.
-    else
-      echo Checking for underline in external names... Yes.
-    fi ;;
-esac
 
+# find a four-byte unsiged integer type for crc calculations
+cat > $test.c <<EOF
+#include <stdio.h>
+#define is32(n,t) for(n=1,k=0;n;n<<=1,k++);if(k==32){puts(t);return 0;}
+int main() {
+    int k;
+    unsigned i;
+    unsigned long l;
+    unsigned short s;
+    is32(i, "unsigned")
+    is32(l, "unsigned long")
+    is32(s, "unsigned short")
+    return 1;
+}
+EOF
+Z_U4=""
+if try $CC $CFLAGS $test.c -o $test && Z_U4=`./$test` && test -n "$Z_U4"; then
+  sed < zconf.h "/#define Z_U4/s/\/\* \.\/configure may/#define Z_U4 $Z_U4   \/* .\/configure put the/" > zconf.temp.h
+  mv zconf.temp.h zconf.h
+  echo "Looking for a four-byte integer type... Found." | tee -a configure.log
+else
+  echo "Looking for a four-byte integer type... Not found." | tee -a configure.log
+fi
+
+# clean up files produced by running the compiler and linker
 rm -f $test.[co] $test $test$shared_ext $test.gcno
 
-# udpate Makefile
+# show the results in the log
+echo >> configure.log
+echo ALL = $ALL >> configure.log
+echo AR = $AR >> configure.log
+echo ARFLAGS = $ARFLAGS >> configure.log
+echo CC = $CC >> configure.log
+echo CFLAGS = $CFLAGS >> configure.log
+echo CPP = $CPP >> configure.log
+echo EXE = $EXE >> configure.log
+echo LDCONFIG = $LDCONFIG >> configure.log
+echo LDFLAGS = $LDFLAGS >> configure.log
+echo LDSHARED = $LDSHARED >> configure.log
+echo LDSHAREDLIBC = $LDSHAREDLIBC >> configure.log
+echo OBJC = $OBJC >> configure.log
+echo PIC_OBJC = $PIC_OBJC >> configure.log
+echo RANLIB = $RANLIB >> configure.log
+echo SFLAGS = $SFLAGS >> configure.log
+echo SHAREDLIB = $SHAREDLIB >> configure.log
+echo SHAREDLIBM = $SHAREDLIBM >> configure.log
+echo SHAREDLIBV = $SHAREDLIBV >> configure.log
+echo STATICLIB = $STATICLIB >> configure.log
+echo TEST = $TEST >> configure.log
+echo VER = $VER >> configure.log
+echo Z_U4 = $Z_U4 >> configure.log
+echo exec_prefix = $exec_prefix >> configure.log
+echo includedir = $includedir >> configure.log
+echo libdir = $libdir >> configure.log
+echo mandir = $mandir >> configure.log
+echo prefix = $prefix >> configure.log
+echo sharedlibdir = $sharedlibdir >> configure.log
+echo uname = $uname >> configure.log
+echo -------------------- >> configure.log
+echo >> configure.log
+echo >> configure.log
+
+# udpate Makefile with the configure results
 sed < Makefile.in "
 /^CC *=/s#=.*#=$CC#
 /^CFLAGS *=/s#=.*#=$CFLAGS#
@@ -617,6 +792,7 @@ sed < Makefile.in "
 /^test: */s#:.*#: $TEST#
 " > Makefile
 
+# create zlib.pc with the configure results
 sed < zlib.pc.in "
 /^CC *=/s#=.*#=$CC#
 /^CFLAGS *=/s#=.*#=$CFLAGS#

contrib/delphi/ZLib.pas

@@ -152,7 +152,7 @@ procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
   const OutBuf: Pointer; BufSize: Integer);
 
 const
-  zlib_version = '1.2.5.2';
+  zlib_version = '1.2.7';
 
 type
   EZlibError = class(Exception);

contrib/dotzlib/DotZLib/UnitTests.cs

@@ -156,7 +156,7 @@ namespace DotZLibTests
         public void Info_Version()
         {
             Info info = new Info();
-            Assert.AreEqual("1.2.5.2", Info.Version);
+            Assert.AreEqual("1.2.7", Info.Version);
             Assert.AreEqual(32, info.SizeOfUInt);
             Assert.AreEqual(32, info.SizeOfULong);
             Assert.AreEqual(32, info.SizeOfPointer);

contrib/infback9/inftree9.c

@@ -1,5 +1,5 @@
 /* inftree9.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2011 Mark Adler
+ * Copyright (C) 1995-2012 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate9_copyright[] =
-   " inflate9 1.2.5.2 Copyright 1995-2011 Mark Adler ";
+   " inflate9 1.2.7 Copyright 1995-2012 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -64,7 +64,7 @@ unsigned short FAR *work;
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
         130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
-        133, 133, 133, 133, 144, 202, 194};
+        133, 133, 133, 133, 144, 78, 68};
     static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
         65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,

contrib/minizip/Makefile.am

@@ -1,13 +1,28 @@
 lib_LTLIBRARIES = libminizip.la
 
+if COND_DEMOS
+bin_PROGRAMS = miniunzip minizip
+endif
+
+zlib_top_srcdir = $(top_srcdir)/../..
+zlib_top_builddir = $(top_builddir)/../..
+
+AM_CPPFLAGS = -I$(zlib_top_srcdir)
+AM_LDFLAGS = -L$(zlib_top_builddir)
+
+if WIN32
+iowin32_src = iowin32.c
+iowin32_h = iowin32.h
+endif
+
 libminizip_la_SOURCES = \
 	ioapi.c \
 	mztools.c \
 	unzip.c \
-	zip.c
+	zip.c \
+	${iowin32_src}
 
-libminizip_la_CFLAGS = -I../.. -L../..
+libminizip_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0 -lz
-libminizip_la_LDFLAGS = -version-info 1:0:0 -lz
 
 minizip_includedir = $(includedir)/minizip
 minizip_include_HEADERS = \
@@ -15,7 +30,8 @@ minizip_include_HEADERS = \
 	ioapi.h \
 	mztools.h \
 	unzip.h \
-	zip.h
+	zip.h \
+	${iowin32_h}
 
 pkgconfigdir = $(libdir)/pkgconfig
 pkgconfig_DATA = minizip.pc
@@ -26,3 +42,4 @@ miniunzip_SOURCES = miniunz.c
 miniunzip_LDADD = libminizip.la
 
 minizip_SOURCES = minizip.c
+minizip_LDADD = libminizip.la -lz

contrib/minizip/configure.ac

@@ -1,11 +1,31 @@
 #                                               -*- Autoconf -*-
 # Process this file with autoconf to produce a configure script.
 
-AC_INIT([minizip], [@ZLIB_VER@], [bugzilla.redhat.com])
+AC_INIT([minizip], [1.2.7], [bugzilla.redhat.com])
-AC_CONFIG_SRCDIR([minigzip.c])
+AC_CONFIG_SRCDIR([minizip.c])
 AM_INIT_AUTOMAKE([foreign])
 LT_INIT
 
+AC_MSG_CHECKING([whether to build example programs])
+AC_ARG_ENABLE([demos], AC_HELP_STRING([--enable-demos], [build example programs]))
+AM_CONDITIONAL([COND_DEMOS], [test "$enable_demos" = yes])
+if test "$enable_demos" = yes
+then
+	AC_MSG_RESULT([yes])
+else
+	AC_MSG_RESULT([no])
+fi
+
+case "${host}" in
+	*-mingw* | mingw*)
+		WIN32="yes"
+		;;
+	*)
+		;;
+esac
+AM_CONDITIONAL([WIN32], [test "${WIN32}" = "yes"])
+
+
 AC_SUBST([HAVE_UNISTD_H], [0])
 AC_CHECK_HEADER([unistd.h], [HAVE_UNISTD_H=1], [])
 AC_CONFIG_FILES([Makefile minizip.pc])

contrib/minizip/ioapi.c

@@ -10,11 +10,11 @@
 
 */
 
-#if (defined(_WIN32))
+#if defined(_WIN32) && (!(defined(_CRT_SECURE_NO_WARNINGS)))
         #define _CRT_SECURE_NO_WARNINGS
 #endif
 
-#ifdef __APPLE__
+#if defined(__APPLE__) || defined(IOAPI_NO_64)
 // In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions
 #define FOPEN_FUNC(filename, mode) fopen(filename, mode)
 #define FTELLO_FUNC(stream) ftello(stream)
@@ -59,7 +59,7 @@ ZPOS64_T call_ztell64 (const zlib_filefunc64_32_def* pfilefunc,voidpf filestream
     else
     {
         uLong tell_uLong = (*(pfilefunc->ztell32_file))(pfilefunc->zfile_func64.opaque,filestream);
-        if ((tell_uLong) == ((uLong)-1))
+        if ((tell_uLong) == MAXU32)
             return (ZPOS64_T)-1;
         else
             return tell_uLong;

contrib/minizip/ioapi.h

@@ -50,6 +50,11 @@
 #define ftello64 ftell
 #define fseeko64 fseek
 #else
+#ifdef __FreeBSD__
+#define fopen64 fopen
+#define ftello64 ftello
+#define fseeko64 fseeko
+#endif
 #ifdef _MSC_VER
  #define fopen64 fopen
  #if (_MSC_VER >= 1400) && (!(defined(NO_MSCVER_FILE64_FUNC)))
@@ -86,6 +91,8 @@ typedef  64BIT_INT_CUSTOM_TYPE ZPOS64_T;
 typedef uint64_t ZPOS64_T;
 #else
 
+/* Maximum unsigned 32-bit value used as placeholder for zip64 */
+#define MAXU32 0xffffffff
 
 #if defined(_MSC_VER) || defined(__BORLANDC__)
 typedef unsigned __int64 ZPOS64_T;

contrib/minizip/minizip.c

@@ -187,7 +187,7 @@ int getFileCrc(const char* filenameinzip,void*buf,unsigned long size_buf,unsigne
    unsigned long calculate_crc=0;
    int err=ZIP_OK;
    FILE * fin = FOPEN_FUNC(filenameinzip,"rb");
-   
+
    unsigned long size_read = 0;
    unsigned long total_read = 0;
    if (fin==NULL)

contrib/minizip/mztools.c

@@ -42,7 +42,7 @@ uLong* bytesRecovered;
     int entries = 0;
     uLong totalBytes = 0;
     char header[30];
-    char filename[256];
+    char filename[1024];
     char extra[1024];
     int offset = 0;
     int offsetCD = 0;
@@ -73,9 +73,14 @@ uLong* bytesRecovered;
 
         /* Filename */
         if (fnsize > 0) {
-          if (fread(filename, 1, fnsize, fpZip) == fnsize) {
+          if (fnsize < sizeof(filename)) {
-            if (fwrite(filename, 1, fnsize, fpOut) == fnsize) {
+            if (fread(filename, 1, fnsize, fpZip) == fnsize) {
-              offset += fnsize;
+                if (fwrite(filename, 1, fnsize, fpOut) == fnsize) {
+                offset += fnsize;
+              } else {
+                err = Z_ERRNO;
+                break;
+              }
             } else {
               err = Z_ERRNO;
               break;
@@ -91,9 +96,14 @@ uLong* bytesRecovered;
 
         /* Extra field */
         if (extsize > 0) {
-          if (fread(extra, 1, extsize, fpZip) == extsize) {
+          if (extsize < sizeof(extra)) {
-            if (fwrite(extra, 1, extsize, fpOut) == extsize) {
+            if (fread(extra, 1, extsize, fpZip) == extsize) {
-              offset += extsize;
+              if (fwrite(extra, 1, extsize, fpOut) == extsize) {
+                offset += extsize;
+                } else {
+                err = Z_ERRNO;
+                break;
+              }
             } else {
               err = Z_ERRNO;
               break;

contrib/minizip/mztools.h

@@ -28,4 +28,10 @@ extern int ZEXPORT unzRepair(const char* file,
                              uLong* nRecovered,
                              uLong* bytesRecovered);
 
+
+#ifdef __cplusplus
+}
+#endif
+
+
 #endif

contrib/minizip/unzip.c

@@ -1040,26 +1040,26 @@ local int unz64local_GetCurrentFileInfoInternal (unzFile file,
             {
                                                         uLong uL;
 
-                                                                if(file_info.uncompressed_size == (ZPOS64_T)(unsigned long)-1)
+                                                                if(file_info.uncompressed_size == MAXU32)
                                                                 {
                                                                         if (unz64local_getLong64(&s->z_filefunc, s->filestream,&file_info.uncompressed_size) != UNZ_OK)
                                                                                         err=UNZ_ERRNO;
                                                                 }
 
-                                                                if(file_info.compressed_size == (ZPOS64_T)(unsigned long)-1)
+                                                                if(file_info.compressed_size == MAXU32)
                                                                 {
                                                                         if (unz64local_getLong64(&s->z_filefunc, s->filestream,&file_info.compressed_size) != UNZ_OK)
                                                                                   err=UNZ_ERRNO;
                                                                 }
 
-                                                                if(file_info_internal.offset_curfile == (ZPOS64_T)(unsigned long)-1)
+                                                                if(file_info_internal.offset_curfile == MAXU32)
                                                                 {
                                                                         /* Relative Header offset */
                                                                         if (unz64local_getLong64(&s->z_filefunc, s->filestream,&file_info_internal.offset_curfile) != UNZ_OK)
                                                                                 err=UNZ_ERRNO;
                                                                 }
 
-                                                                if(file_info.disk_num_start == (unsigned long)-1)
+                                                                if(file_info.disk_num_start == MAXU32)
                                                                 {
                                                                         /* Disk Start Number */
                                                                         if (unz64local_getLong(&s->z_filefunc, s->filestream,&uL) != UNZ_OK)
@@ -1696,7 +1696,7 @@ extern int ZEXPORT unzReadCurrentFile  (unzFile file, voidp buf, unsigned len)
         return UNZ_PARAMERROR;
 
 
-    if ((pfile_in_zip_read_info->read_buffer == NULL))
+    if (pfile_in_zip_read_info->read_buffer == NULL)
         return UNZ_END_OF_LIST_OF_FILE;
     if (len==0)
         return 0;

contrib/minizip/zip.c

@@ -1067,6 +1067,7 @@ extern int ZEXPORT zipOpenNewFileInZip4_64 (zipFile file, const char* filename,
     int err = ZIP_OK;
 
 #    ifdef NOCRYPT
+    (crcForCrypting);
     if (password != NULL)
         return ZIP_PARAMERROR;
 #    endif
@@ -1114,9 +1115,9 @@ extern int ZEXPORT zipOpenNewFileInZip4_64 (zipFile file, const char* filename,
     zi->ci.flag = flagBase;
     if ((level==8) || (level==9))
       zi->ci.flag |= 2;
-    if ((level==2))
+    if (level==2)
       zi->ci.flag |= 4;
-    if ((level==1))
+    if (level==1)
       zi->ci.flag |= 6;
     if (password != NULL)
       zi->ci.flag |= 1;
@@ -1710,7 +1711,7 @@ extern int ZEXPORT zipCloseFileInZipRaw64 (zipFile file, ZPOS64_T uncompressed_s
         if (err==ZIP_OK)
             err = zip64local_putValue(&zi->z_filefunc,zi->filestream,crc32,4); /* crc 32, unknown */
 
-        if(uncompressed_size >= 0xffffffff)
+        if(uncompressed_size >= 0xffffffff || compressed_size >= 0xffffffff )
         {
           if(zi->ci.pos_zip64extrainfo > 0)
           {
@@ -1724,6 +1725,8 @@ extern int ZEXPORT zipCloseFileInZipRaw64 (zipFile file, ZPOS64_T uncompressed_s
             if (err==ZIP_OK) /* uncompressed size, unknown */
               err = zip64local_putValue(&zi->z_filefunc, zi->filestream, compressed_size, 8);
           }
+          else
+              err = ZIP_BADZIPFILE; // Caller passed zip64 = 0, so no room for zip64 info -> fatal
         }
         else
         {
@@ -1852,7 +1855,7 @@ int Write_EndOfCentralDirectoryRecord(zip64_internal* zi, uLong size_centraldir,
       err = zip64local_putValue(&zi->z_filefunc,zi->filestream, (uLong)0xffffffff,4);
     }
     else
-                  err = zip64local_putValue(&zi->z_filefunc,zi->filestream, (uLong)(centraldir_pos_inzip - zi->add_position_when_writting_offset),4);
+      err = zip64local_putValue(&zi->z_filefunc,zi->filestream, (uLong)(centraldir_pos_inzip - zi->add_position_when_writting_offset),4);
   }
 
    return err;
@@ -1919,7 +1922,7 @@ extern int ZEXPORT zipClose (zipFile file, const char* global_comment)
     free_linkedlist(&(zi->central_dir));
 
     pos = centraldir_pos_inzip - zi->add_position_when_writting_offset;
-    if(pos >= 0xffffffff)
+    if(pos >= 0xffffffff || zi->number_entry > 0xFFFF)
     {
       ZPOS64_T Zip64EOCDpos = ZTELL64(zi->z_filefunc,zi->filestream);
       Write_Zip64EndOfCentralDirectoryRecord(zi, size_centraldir, centraldir_pos_inzip);

contrib/pascal/zlibpas.pas

@@ -10,7 +10,8 @@ unit zlibpas;
 interface
 
 const
-  ZLIB_VERSION = '1.2.5.2';
+  ZLIB_VERSION = '1.2.7';
+  ZLIB_VERNUM  = $1270;
 
 type
   alloc_func = function(opaque: Pointer; items, size: Integer): Pointer;
@@ -45,6 +46,23 @@ type
     reserved: LongInt;    (* reserved for future use *)
   end;
 
+  gz_headerp = ^gz_header;
+  gz_header = packed record
+    text: Integer;        (* true if compressed data believed to be text *)
+    time: LongInt;        (* modification time *)
+    xflags: Integer;      (* extra flags (not used when writing a gzip file) *)
+    os: Integer;          (* operating system *)
+    extra: PChar;         (* pointer to extra field or Z_NULL if none *)
+    extra_len: Integer;   (* extra field length (valid if extra != Z_NULL) *)
+    extra_max: Integer;   (* space at extra (only when reading header) *)
+    name: PChar;          (* pointer to zero-terminated file name or Z_NULL *)
+    name_max: Integer;    (* space at name (only when reading header) *)
+    comment: PChar;       (* pointer to zero-terminated comment or Z_NULL *)
+    comm_max: Integer;    (* space at comment (only when reading header) *)
+    hcrc: Integer;        (* true if there was or will be a header crc *)
+    done: Integer;        (* true when done reading gzip header *)
+  end;
+
 (* constants *)
 const
   Z_NO_FLUSH      = 0;
@@ -52,6 +70,8 @@ const
   Z_SYNC_FLUSH    = 2;
   Z_FULL_FLUSH    = 3;
   Z_FINISH        = 4;
+  Z_BLOCK         = 5;
+  Z_TREES         = 6;
 
   Z_OK            =  0;
   Z_STREAM_END    =  1;
@@ -71,9 +91,11 @@ const
   Z_FILTERED            = 1;
   Z_HUFFMAN_ONLY        = 2;
   Z_RLE                 = 3;
+  Z_FIXED               = 4;
   Z_DEFAULT_STRATEGY    = 0;
 
   Z_BINARY   = 0;
+  Z_TEXT     = 1;
   Z_ASCII    = 1;
   Z_UNKNOWN  = 2;
 
@@ -96,15 +118,21 @@ function deflateSetDictionary(var strm: z_stream; const dictionary: PChar;
 function deflateCopy(var dest, source: z_stream): Integer;
 function deflateReset(var strm: z_stream): Integer;
 function deflateParams(var strm: z_stream; level, strategy: Integer): Integer;
+function deflateTune(var strm: z_stream; good_length, max_lazy, nice_length, max_chain: Integer): Integer;
 function deflateBound(var strm: z_stream; sourceLen: LongInt): LongInt;
 function deflatePending(var strm: z_stream; var pending: Integer; var bits: Integer): Integer;
 function deflatePrime(var strm: z_stream; bits, value: Integer): Integer;
+function deflateSetHeader(var strm: z_stream; head: gz_header): Integer;
 function inflateInit2(var strm: z_stream; windowBits: Integer): Integer;
 function inflateSetDictionary(var strm: z_stream; const dictionary: PChar;
                               dictLength: Integer): Integer;
 function inflateSync(var strm: z_stream): Integer;
 function inflateCopy(var dest, source: z_stream): Integer;
 function inflateReset(var strm: z_stream): Integer;
+function inflateReset2(var strm: z_stream; windowBits: Integer): Integer;
+function inflatePrime(var strm: z_stream; bits, value: Integer): Integer;
+function inflateMark(var strm: z_stream): LongInt;
+function inflateGetHeader(var strm: z_stream; var head: gz_header): Integer;
 function inflateBackInit(var strm: z_stream;
                          windowBits: Integer; window: PChar): Integer;
 function inflateBack(var strm: z_stream; in_fn: in_func; in_desc: Pointer;
@@ -124,7 +152,9 @@ function uncompress(dest: PChar; var destLen: LongInt;
 
 (* checksum functions *)
 function adler32(adler: LongInt; const buf: PChar; len: Integer): LongInt;
+function adler32_combine(adler1, adler2, len2: LongInt): LongInt;
 function crc32(crc: LongInt; const buf: PChar; len: Integer): LongInt;
+function crc32_combine(crc1, crc2, len2: LongInt): LongInt;
 
 (* various hacks, don't look :) *)
 function deflateInit_(var strm: z_stream; level: Integer;
@@ -156,10 +186,12 @@ implementation
 {$L zutil.obj}
 
 function adler32; external;
+function adler32_combine; external;
 function compress; external;
 function compress2; external;
 function compressBound; external;
 function crc32; external;
+function crc32_combine; external;
 function deflate; external;
 function deflateBound; external;
 function deflateCopy; external;
@@ -171,15 +203,21 @@ function deflatePending; external;
 function deflatePrime; external;
 function deflateReset; external;
 function deflateSetDictionary; external;
+function deflateSetHeader; external;
+function deflateTune; external;
 function inflate; external;
 function inflateBack; external;
 function inflateBackEnd; external;
 function inflateBackInit_; external;
 function inflateCopy; external;
 function inflateEnd; external;
+function inflateGetHeader; external;
 function inflateInit_; external;
 function inflateInit2_; external;
+function inflateMark; external;
+function inflatePrime; external;
 function inflateReset; external;
+function inflateReset2; external;
 function inflateSetDictionary; external;
 function inflateSync; external;
 function uncompress; external;

contrib/vstudio/readme.txt

@@ -1,8 +1,8 @@
-Building instructions for the DLL versions of Zlib 1.2.4
+Building instructions for the DLL versions of Zlib 1.2.7
 ========================================================
 
 This directory contains projects that build zlib and minizip using
-Microsoft Visual C++ 9.0/10.0, and Visual C++ .
+Microsoft Visual C++ 9.0/10.0.
 
 You don't need to build these projects yourself. You can download the
 binaries from:
@@ -10,9 +10,6 @@ binaries from:
 
 More information can be found at this site.
 
-first compile assembly code by running
-bld_ml64.bat in contrib\masmx64
-bld_ml32.bat in contrib\masmx86
 
 
 
@@ -20,13 +17,16 @@ bld_ml32.bat in contrib\masmx86
 Build instructions for Visual Studio 2008 (32 bits or 64 bits)
 --------------------------------------------------------------
 - Uncompress current zlib, including all contrib/* files
-- Open contrib\vstudio\vc9\zlibvc.sln with Microsoft Visual C++ 2008.0
+- Compile assembly code (with Visual Studio Command Prompt) by running:
+   bld_ml64.bat (in contrib\masmx64)
+   bld_ml32.bat (in contrib\masmx86)
+- Open contrib\vstudio\vc9\zlibvc.sln with Microsoft Visual C++ 2008
 - Or run: vcbuild /rebuild contrib\vstudio\vc9\zlibvc.sln "Release|Win32"
 
 Build instructions for Visual Studio 2010 (32 bits or 64 bits)
 --------------------------------------------------------------
 - Uncompress current zlib, including all contrib/* files
-- Open contrib\vstudio\vc10\zlibvc.sln with Microsoft Visual C++ 2010.0
+- Open contrib\vstudio\vc10\zlibvc.sln with Microsoft Visual C++ 2010
 
 
 Important

contrib/vstudio/vc10/testzlibdll.vcxproj

@@ -139,7 +139,7 @@
     </ClCompile>
     <Link>
       <AdditionalDependencies>x86\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
-      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <OutputFile>$(OutDir)testzlibdll.exe</OutputFile>
       <GenerateDebugInformation>true</GenerateDebugInformation>
       <ProgramDatabaseFile>$(OutDir)testzlib.pdb</ProgramDatabaseFile>
       <SubSystem>Console</SubSystem>
@@ -169,7 +169,7 @@
     </ClCompile>
     <Link>
       <AdditionalDependencies>x86\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
-      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <OutputFile>$(OutDir)testzlibdll.exe</OutputFile>
       <GenerateDebugInformation>true</GenerateDebugInformation>
       <SubSystem>Console</SubSystem>
       <OptimizeReferences>true</OptimizeReferences>
@@ -200,7 +200,7 @@
     </ClCompile>
     <Link>
       <AdditionalDependencies>x64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
-      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <OutputFile>$(OutDir)testzlibdll.exe</OutputFile>
       <GenerateDebugInformation>true</GenerateDebugInformation>
       <ProgramDatabaseFile>$(OutDir)testzlib.pdb</ProgramDatabaseFile>
       <SubSystem>Console</SubSystem>
@@ -227,7 +227,7 @@
     </ClCompile>
     <Link>
       <AdditionalDependencies>ia64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
-      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <OutputFile>$(OutDir)testzlibdll.exe</OutputFile>
       <GenerateDebugInformation>true</GenerateDebugInformation>
       <ProgramDatabaseFile>$(OutDir)testzlib.pdb</ProgramDatabaseFile>
       <SubSystem>Console</SubSystem>
@@ -257,7 +257,7 @@
     </ClCompile>
     <Link>
       <AdditionalDependencies>x64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
-      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <OutputFile>$(OutDir)testzlibdll.exe</OutputFile>
       <GenerateDebugInformation>true</GenerateDebugInformation>
       <SubSystem>Console</SubSystem>
       <OptimizeReferences>true</OptimizeReferences>
@@ -288,7 +288,7 @@
     </ClCompile>
     <Link>
       <AdditionalDependencies>ia64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
-      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <OutputFile>$(OutDir)testzlibdll.exe</OutputFile>
       <GenerateDebugInformation>true</GenerateDebugInformation>
       <SubSystem>Console</SubSystem>
       <OptimizeReferences>true</OptimizeReferences>

contrib/vstudio/vc10/zlib.rc

@@ -2,8 +2,8 @@
 
 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1.2.5.2,1
+  FILEVERSION	 1.2.7,0
-  PRODUCTVERSION 1.2.5.2,1
+  PRODUCTVERSION 1.2.7,0
   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
   FILEFLAGS	0
   FILEOS	VOS_DOS_WINDOWS32
@@ -17,12 +17,12 @@ BEGIN
 
     BEGIN
       VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
-      VALUE "FileVersion",	"1.2.5.2\0"
+      VALUE "FileVersion",	"1.2.7\0"
       VALUE "InternalName",	"zlib\0"
       VALUE "OriginalFilename",	"zlib.dll\0"
       VALUE "ProductName",	"ZLib.DLL\0"
       VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
-      VALUE "LegalCopyright", "(C) 1995-2011 Jean-loup Gailly & Mark Adler\0"
+      VALUE "LegalCopyright", "(C) 1995-2012 Jean-loup Gailly & Mark Adler\0"
     END
   END
   BLOCK "VarFileInfo"

contrib/vstudio/vc10/zlibvc.def

@@ -1,7 +1,7 @@
 LIBRARY
 ; zlib data compression and ZIP file I/O library
 
-VERSION		1.24
+VERSION		1.2.7
 
 EXPORTS
         adler32                                  @1
@@ -33,6 +33,7 @@ EXPORTS
         zlibVersion                              @27
         gzprintf                                 @28
         gzputc                                   @29
+        gzgetc                                   @30
         gzseek                                   @31
         gzrewind                                 @32
         gztell                                   @33
@@ -130,7 +131,9 @@ EXPORTS
         inflateUndermine                        @160
 
 ; zlib1 v1.2.6 added:
-        gzgetc_                                 @30
+        gzgetc_                                 @161
-        gzflags                                 @162
         inflateResetKeep                        @163
-	deflateResetKeep			@164
+        deflateResetKeep                        @164
+
+; zlib1 v1.2.7 added:
+        gzopen_w                                @165

contrib/vstudio/vc10/zlibvc.vcxproj

@@ -180,6 +180,12 @@
     <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
     <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
     <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">zlibwapi</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">zlibwapi</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">zlibwapi</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">zlibwapi</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">zlibwapi</TargetName>
+    <TargetName Condition="'$(Configuration)|$(Platform)'=='Release|x64'">zlibwapi</TargetName>
   </PropertyGroup>
   <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
     <Midl>
@@ -227,6 +233,10 @@
       </DataExecutionPrevention>
       <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
     </Link>
+    <PreBuildEvent>
+      <Command>cd ..\..\masmx86
+bld_ml32.bat</Command>
+    </PreBuildEvent>
   </ItemDefinitionGroup>
   <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">
     <Midl>
@@ -324,6 +334,10 @@
       </DataExecutionPrevention>
       <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
     </Link>
+    <PreBuildEvent>
+      <Command>cd ..\..\masmx86
+bld_ml32.bat</Command>
+    </PreBuildEvent>
   </ItemDefinitionGroup>
   <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
     <Midl>
@@ -368,6 +382,10 @@
       <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
       <TargetMachine>MachineX64</TargetMachine>
     </Link>
+    <PreBuildEvent>
+      <Command>cd ..\..\contrib\masmx64
+bld_ml64.bat</Command>
+    </PreBuildEvent>
   </ItemDefinitionGroup>
   <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">
     <Midl>
@@ -547,6 +565,10 @@
       <ImportLibrary>$(OutDir)zlibwapi.lib</ImportLibrary>
       <TargetMachine>MachineX64</TargetMachine>
     </Link>
+    <PreBuildEvent>
+      <Command>cd ..\..\masmx64
+bld_ml64.bat</Command>
+    </PreBuildEvent>
   </ItemDefinitionGroup>
   <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">
     <Midl>

contrib/vstudio/vc9/zlib.rc

@@ -2,8 +2,8 @@
 
 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1.2.5.2,1
+  FILEVERSION	 1.2.7,0
-  PRODUCTVERSION 1.2.5.2,1
+  PRODUCTVERSION 1.2.7,0
   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
   FILEFLAGS	0
   FILEOS	VOS_DOS_WINDOWS32
@@ -17,12 +17,12 @@ BEGIN
 
     BEGIN
       VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
-      VALUE "FileVersion",	"1.2.5.2\0"
+      VALUE "FileVersion",	"1.2.7\0"
       VALUE "InternalName",	"zlib\0"
       VALUE "OriginalFilename",	"zlib.dll\0"
       VALUE "ProductName",	"ZLib.DLL\0"
       VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
-      VALUE "LegalCopyright", "(C) 1995-2011 Jean-loup Gailly & Mark Adler\0"
+      VALUE "LegalCopyright", "(C) 1995-2012 Jean-loup Gailly & Mark Adler\0"
     END
   END
   BLOCK "VarFileInfo"

contrib/vstudio/vc9/zlibvc.def

@@ -1,7 +1,7 @@
 LIBRARY
 ; zlib data compression and ZIP file I/O library
 
-VERSION		1.24
+VERSION		1.2.7
 
 EXPORTS
         adler32                                  @1
@@ -33,6 +33,7 @@ EXPORTS
         zlibVersion                              @27
         gzprintf                                 @28
         gzputc                                   @29
+        gzgetc                                   @30
         gzseek                                   @31
         gzrewind                                 @32
         gztell                                   @33
@@ -130,7 +131,9 @@ EXPORTS
         inflateUndermine                        @160
 
 ; zlib1 v1.2.6 added:
-        gzgetc_                                 @30
+        gzgetc_                                 @161
-        gzflags                                 @162
         inflateResetKeep                        @163
-	deflateResetKeep			@164
+        deflateResetKeep                        @164
+
+; zlib1 v1.2.7 added:
+        gzopen_w                                @165

crc32.c

@@ -1,5 +1,5 @@
 /* crc32.c -- compute the CRC-32 of a data stream
- * Copyright (C) 1995-2006, 2010, 2011 Mark Adler
+ * Copyright (C) 1995-2006, 2010, 2011, 2012 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  *
  * Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
@@ -32,39 +32,17 @@
 
 #define local static
 
-/* Find a four-byte integer type for crc32_little() and crc32_big(). */
-#ifndef NOBYFOUR
-#  ifdef STDC           /* need ANSI C limits.h to determine sizes */
-#    include <limits.h>
-#    define BYFOUR
-#    if (UINT_MAX == 0xffffffffUL)
-       typedef unsigned int u4;
-#    else
-#      if (ULONG_MAX == 0xffffffffUL)
-         typedef unsigned long u4;
-#      else
-#        if (USHRT_MAX == 0xffffffffUL)
-           typedef unsigned short u4;
-#        else
-#          undef BYFOUR     /* can't find a four-byte integer type! */
-#        endif
-#      endif
-#    endif
-#  endif /* STDC */
-#endif /* !NOBYFOUR */
-
 /* Definitions for doing the crc four data bytes at a time. */
+#if !defined(NOBYFOUR) && defined(Z_U4)
+#  define BYFOUR
+#endif
 #ifdef BYFOUR
-   typedef u4 crc_table_t;
-#  define REV(w) ((((w)>>24)&0xff)+(((w)>>8)&0xff00)+ \
-                (((w)&0xff00)<<8)+(((w)&0xff)<<24))
    local unsigned long crc32_little OF((unsigned long,
                         const unsigned char FAR *, unsigned));
    local unsigned long crc32_big OF((unsigned long,
                         const unsigned char FAR *, unsigned));
 #  define TBLS 8
 #else
-   typedef unsigned long crc_table_t;
 #  define TBLS 1
 #endif /* BYFOUR */
 
@@ -78,10 +56,10 @@ local uLong crc32_combine_ OF((uLong crc1, uLong crc2, z_off64_t len2));
 #ifdef DYNAMIC_CRC_TABLE
 
 local volatile int crc_table_empty = 1;
-local crc_table_t FAR crc_table[TBLS][256];
+local z_crc_t FAR crc_table[TBLS][256];
 local void make_crc_table OF((void));
 #ifdef MAKECRCH
-   local void write_table OF((FILE *, const crc_table_t FAR *));
+   local void write_table OF((FILE *, const z_crc_t FAR *));
 #endif /* MAKECRCH */
 /*
   Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
@@ -111,9 +89,9 @@ local void make_crc_table OF((void));
 */
 local void make_crc_table()
 {
-    crc_table_t c;
+    z_crc_t c;
     int n, k;
-    crc_table_t poly;                   /* polynomial exclusive-or pattern */
+    z_crc_t poly;                       /* polynomial exclusive-or pattern */
     /* terms of polynomial defining this crc (except x^32): */
     static volatile int first = 1;      /* flag to limit concurrent making */
     static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
@@ -127,11 +105,11 @@ local void make_crc_table()
         /* make exclusive-or pattern from polynomial (0xedb88320UL) */
         poly = 0;
         for (n = 0; n < (int)(sizeof(p)/sizeof(unsigned char)); n++)
-            poly |= (crc_table_t)1 << (31 - p[n]);
+            poly |= (z_crc_t)1 << (31 - p[n]);
 
         /* generate a crc for every 8-bit value */
         for (n = 0; n < 256; n++) {
-            c = (crc_table_t)n;
+            c = (z_crc_t)n;
             for (k = 0; k < 8; k++)
                 c = c & 1 ? poly ^ (c >> 1) : c >> 1;
             crc_table[0][n] = c;
@@ -142,11 +120,11 @@ local void make_crc_table()
            and then the byte reversal of those as well as the first table */
         for (n = 0; n < 256; n++) {
             c = crc_table[0][n];
-            crc_table[4][n] = REV(c);
+            crc_table[4][n] = ZSWAP32(c);
             for (k = 1; k < 4; k++) {
                 c = crc_table[0][c & 0xff] ^ (c >> 8);
                 crc_table[k][n] = c;
-                crc_table[k + 4][n] = REV(c);
+                crc_table[k + 4][n] = ZSWAP32(c);
             }
         }
 #endif /* BYFOUR */
@@ -168,7 +146,7 @@ local void make_crc_table()
         if (out == NULL) return;
         fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n");
         fprintf(out, " * Generated automatically by crc32.c\n */\n\n");
-        fprintf(out, "local const crc_table_t FAR ");
+        fprintf(out, "local const z_crc_t FAR ");
         fprintf(out, "crc_table[TBLS][256] =\n{\n  {\n");
         write_table(out, crc_table[0]);
 #  ifdef BYFOUR
@@ -188,7 +166,7 @@ local void make_crc_table()
 #ifdef MAKECRCH
 local void write_table(out, table)
     FILE *out;
-    const crc_table_t FAR *table;
+    const z_crc_t FAR *table;
 {
     int n;
 
@@ -209,13 +187,13 @@ local void write_table(out, table)
 /* =========================================================================
  * This function can be used by asm versions of crc32()
  */
-const unsigned long FAR * ZEXPORT get_crc_table()
+const z_crc_t FAR * ZEXPORT get_crc_table()
 {
 #ifdef DYNAMIC_CRC_TABLE
     if (crc_table_empty)
         make_crc_table();
 #endif /* DYNAMIC_CRC_TABLE */
-    return (const unsigned long FAR *)crc_table;
+    return (const z_crc_t FAR *)crc_table;
 }
 
 /* ========================================================================= */
@@ -237,7 +215,7 @@ unsigned long ZEXPORT crc32(crc, buf, len)
 
 #ifdef BYFOUR
     if (sizeof(void *) == sizeof(ptrdiff_t)) {
-        u4 endian;
+        z_crc_t endian;
 
         endian = 1;
         if (*((unsigned char *)(&endian)))
@@ -271,17 +249,17 @@ local unsigned long crc32_little(crc, buf, len)
     const unsigned char FAR *buf;
     unsigned len;
 {
-    register u4 c;
+    register z_crc_t c;
-    register const u4 FAR *buf4;
+    register const z_crc_t FAR *buf4;
 
-    c = (u4)crc;
+    c = (z_crc_t)crc;
     c = ~c;
     while (len && ((ptrdiff_t)buf & 3)) {
         c = crc_table[0][(c ^ *buf++) & 0xff] ^ (c >> 8);
         len--;
     }
 
-    buf4 = (const u4 FAR *)(const void FAR *)buf;
+    buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
     while (len >= 32) {
         DOLIT32;
         len -= 32;
@@ -311,17 +289,17 @@ local unsigned long crc32_big(crc, buf, len)
     const unsigned char FAR *buf;
     unsigned len;
 {
-    register u4 c;
+    register z_crc_t c;
-    register const u4 FAR *buf4;
+    register const z_crc_t FAR *buf4;
 
-    c = REV((u4)crc);
+    c = ZSWAP32((z_crc_t)crc);
     c = ~c;
     while (len && ((ptrdiff_t)buf & 3)) {
         c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
         len--;
     }
 
-    buf4 = (const u4 FAR *)(const void FAR *)buf;
+    buf4 = (const z_crc_t FAR *)(const void FAR *)buf;
     buf4--;
     while (len >= 32) {
         DOBIG32;
@@ -338,7 +316,7 @@ local unsigned long crc32_big(crc, buf, len)
         c = crc_table[4][(c >> 24) ^ *buf++] ^ (c << 8);
     } while (--len);
     c = ~c;
-    return (unsigned long)(REV(c));
+    return (unsigned long)(ZSWAP32(c));
 }
 
 #endif /* BYFOUR */

crc32.h

@@ -2,7 +2,7 @@
  * Generated automatically by crc32.c
  */
 
-local const crc_table_t FAR crc_table[TBLS][256] =
+local const z_crc_t FAR crc_table[TBLS][256] =
 {
   {
     0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL,

deflate.c

@@ -1,5 +1,5 @@
 /* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995-2011 Jean-loup Gailly and Mark Adler
+ * Copyright (C) 1995-2012 Jean-loup Gailly and Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -52,7 +52,7 @@
 #include "deflate.h"
 
 const char deflate_copyright[] =
-   " deflate 1.2.5.2 Copyright 1995-2011 Jean-loup Gailly and Mark Adler ";
+   " deflate 1.2.7 Copyright 1995-2012 Jean-loup Gailly and Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -155,6 +155,9 @@ local const config configuration_table[10] = {
 struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
 #endif
 
+/* rank Z_BLOCK between Z_NO_FLUSH and Z_PARTIAL_FLUSH */
+#define RANK(f) (((f) << 1) - ((f) > 4 ? 9 : 0))
+
 /* ===========================================================================
  * Update a hash value with the given input byte
  * IN  assertion: all calls to to UPDATE_HASH are made with consecutive
@@ -346,6 +349,7 @@ int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
             CLEAR_HASH(s);
             s->strstart = 0;
             s->block_start = 0L;
+            s->insert = 0;
         }
         dictionary += dictLength - s->w_size;  /* use the tail */
         dictLength = s->w_size;
@@ -374,6 +378,7 @@ int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
     }
     s->strstart += s->lookahead;
     s->block_start = (long)s->strstart;
+    s->insert = s->lookahead;
     s->lookahead = 0;
     s->match_length = s->prev_length = MIN_MATCH-1;
     s->match_available = 0;
@@ -448,8 +453,10 @@ int ZEXPORT deflatePending (strm, pending, bits)
     z_streamp strm;
 {
     if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    *pending = strm->state->pending;
+    if (pending != Z_NULL)
-    *bits = strm->state->bi_valid;
+        *pending = strm->state->pending;
+    if (bits != Z_NULL)
+        *bits = strm->state->bi_valid;
     return Z_OK;
 }
 
@@ -459,9 +466,23 @@ int ZEXPORT deflatePrime (strm, bits, value)
     int bits;
     int value;
 {
+    deflate_state *s;
+    int put;
+
     if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    strm->state->bi_valid = bits;
+    s = strm->state;
-    strm->state->bi_buf = (ush)(value & ((1 << bits) - 1));
+    if ((Bytef *)(s->d_buf) < s->pending_out + ((Buf_size + 7) >> 3))
+        return Z_BUF_ERROR;
+    do {
+        put = Buf_size - s->bi_valid;
+        if (put > bits)
+            put = bits;
+        s->bi_buf |= (ush)((value & ((1 << put) - 1)) << s->bi_valid);
+        s->bi_valid += put;
+        _tr_flush_bits(s);
+        value >>= put;
+        bits -= put;
+    } while (bits);
     return Z_OK;
 }
 
@@ -619,19 +640,22 @@ local void putShortMSB (s, b)
 local void flush_pending(strm)
     z_streamp strm;
 {
-    unsigned len = strm->state->pending;
+    unsigned len;
+    deflate_state *s = strm->state;
 
+    _tr_flush_bits(s);
+    len = s->pending;
     if (len > strm->avail_out) len = strm->avail_out;
     if (len == 0) return;
 
-    zmemcpy(strm->next_out, strm->state->pending_out, len);
+    zmemcpy(strm->next_out, s->pending_out, len);
     strm->next_out  += len;
-    strm->state->pending_out  += len;
+    s->pending_out  += len;
     strm->total_out += len;
     strm->avail_out  -= len;
-    strm->state->pending -= len;
+    s->pending -= len;
-    if (strm->state->pending == 0) {
+    if (s->pending == 0) {
-        strm->state->pending_out = strm->state->pending_buf;
+        s->pending_out = s->pending_buf;
     }
 }
 
@@ -858,7 +882,7 @@ int ZEXPORT deflate (strm, flush)
      * flushes. For repeated and useless calls with Z_FINISH, we keep
      * returning Z_STREAM_END instead of Z_BUF_ERROR.
      */
-    } else if (strm->avail_in == 0 && flush <= old_flush &&
+    } else if (strm->avail_in == 0 && RANK(flush) <= RANK(old_flush) &&
                flush != Z_FINISH) {
         ERR_RETURN(strm, Z_BUF_ERROR);
     }
@@ -907,6 +931,7 @@ int ZEXPORT deflate (strm, flush)
                     if (s->lookahead == 0) {
                         s->strstart = 0;
                         s->block_start = 0L;
+                        s->insert = 0;
                     }
                 }
             }
@@ -1093,6 +1118,7 @@ local void lm_init (s)
     s->strstart = 0;
     s->block_start = 0L;
     s->lookahead = 0;
+    s->insert = 0;
     s->match_length = s->prev_length = MIN_MATCH-1;
     s->match_available = 0;
     s->ins_h = 0;
@@ -1440,12 +1466,24 @@ local void fill_window(s)
         s->lookahead += n;
 
         /* Initialize the hash value now that we have some input: */
-        if (s->lookahead >= MIN_MATCH) {
+        if (s->lookahead + s->insert >= MIN_MATCH) {
-            s->ins_h = s->window[s->strstart];
+            uInt str = s->strstart - s->insert;
-            UPDATE_HASH(s, s->ins_h, s->window[s->strstart+1]);
+            s->ins_h = s->window[str];
+            UPDATE_HASH(s, s->ins_h, s->window[str + 1]);
 #if MIN_MATCH != 3
             Call UPDATE_HASH() MIN_MATCH-3 more times
 #endif
+            while (s->insert) {
+                UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]);
+#ifndef FASTEST
+                s->prev[str & s->w_mask] = s->head[s->ins_h];
+#endif
+                s->head[s->ins_h] = (Pos)str;
+                str++;
+                s->insert--;
+                if (s->lookahead + s->insert < MIN_MATCH)
+                    break;
+            }
         }
         /* If the whole input has less than MIN_MATCH bytes, ins_h is garbage,
          * but this is not important since only literal bytes will be emitted.
@@ -1568,8 +1606,14 @@ local block_state deflate_stored(s, flush)
             FLUSH_BLOCK(s, 0);
         }
     }
-    FLUSH_BLOCK(s, flush == Z_FINISH);
+    s->insert = 0;
-    return flush == Z_FINISH ? finish_done : block_done;
+    if (flush == Z_FINISH) {
+        FLUSH_BLOCK(s, 1);
+        return finish_done;
+    }
+    if ((long)s->strstart > s->block_start)
+        FLUSH_BLOCK(s, 0);
+    return block_done;
 }
 
 /* ===========================================================================
@@ -1665,8 +1709,14 @@ local block_state deflate_fast(s, flush)
         }
         if (bflush) FLUSH_BLOCK(s, 0);
     }
-    FLUSH_BLOCK(s, flush == Z_FINISH);
+    s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1;
-    return flush == Z_FINISH ? finish_done : block_done;
+    if (flush == Z_FINISH) {
+        FLUSH_BLOCK(s, 1);
+        return finish_done;
+    }
+    if (s->last_lit)
+        FLUSH_BLOCK(s, 0);
+    return block_done;
 }
 
 #ifndef FASTEST
@@ -1790,8 +1840,14 @@ local block_state deflate_slow(s, flush)
         _tr_tally_lit(s, s->window[s->strstart-1], bflush);
         s->match_available = 0;
     }
-    FLUSH_BLOCK(s, flush == Z_FINISH);
+    s->insert = s->strstart < MIN_MATCH-1 ? s->strstart : MIN_MATCH-1;
-    return flush == Z_FINISH ? finish_done : block_done;
+    if (flush == Z_FINISH) {
+        FLUSH_BLOCK(s, 1);
+        return finish_done;
+    }
+    if (s->last_lit)
+        FLUSH_BLOCK(s, 0);
+    return block_done;
 }
 #endif /* FASTEST */
 
@@ -1859,8 +1915,14 @@ local block_state deflate_rle(s, flush)
         }
         if (bflush) FLUSH_BLOCK(s, 0);
     }
-    FLUSH_BLOCK(s, flush == Z_FINISH);
+    s->insert = 0;
-    return flush == Z_FINISH ? finish_done : block_done;
+    if (flush == Z_FINISH) {
+        FLUSH_BLOCK(s, 1);
+        return finish_done;
+    }
+    if (s->last_lit)
+        FLUSH_BLOCK(s, 0);
+    return block_done;
 }
 
 /* ===========================================================================
@@ -1892,6 +1954,12 @@ local block_state deflate_huff(s, flush)
         s->strstart++;
         if (bflush) FLUSH_BLOCK(s, 0);
     }
-    FLUSH_BLOCK(s, flush == Z_FINISH);
+    s->insert = 0;
-    return flush == Z_FINISH ? finish_done : block_done;
+    if (flush == Z_FINISH) {
+        FLUSH_BLOCK(s, 1);
+        return finish_done;
+    }
+    if (s->last_lit)
+        FLUSH_BLOCK(s, 0);
+    return block_done;
 }

deflate.h

@@ -1,5 +1,5 @@
 /* deflate.h -- internal compression state
- * Copyright (C) 1995-2010 Jean-loup Gailly
+ * Copyright (C) 1995-2012 Jean-loup Gailly
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -48,6 +48,9 @@
 #define MAX_BITS 15
 /* All codes must not exceed MAX_BITS bits */
 
+#define Buf_size 16
+/* size of bit buffer in bi_buf */
+
 #define INIT_STATE    42
 #define EXTRA_STATE   69
 #define NAME_STATE    73
@@ -244,7 +247,7 @@ typedef struct internal_state {
     ulg opt_len;        /* bit length of current block with optimal trees */
     ulg static_len;     /* bit length of current block with static trees */
     uInt matches;       /* number of string matches in current block */
-    int last_eob_len;   /* bit length of EOB code for last block */
+    uInt insert;        /* bytes at end of window left to insert */
 
 #ifdef DEBUG
     ulg compressed_len; /* total bit length of compressed file mod 2^32 */
@@ -294,6 +297,7 @@ void ZLIB_INTERNAL _tr_init OF((deflate_state *s));
 int ZLIB_INTERNAL _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
 void ZLIB_INTERNAL _tr_flush_block OF((deflate_state *s, charf *buf,
                         ulg stored_len, int last));
+void ZLIB_INTERNAL _tr_flush_bits OF((deflate_state *s));
 void ZLIB_INTERNAL _tr_align OF((deflate_state *s));
 void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf,
                         ulg stored_len, int last));

gzguts.h

@@ -1,5 +1,5 @@
 /* gzguts.h -- zlib internal header definitions for gz* operations
- * Copyright (C) 2004, 2005, 2010, 2011 Mark Adler
+ * Copyright (C) 2004, 2005, 2010, 2011, 2012 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -12,7 +12,7 @@
 #  endif
 #endif
 
-#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33) && !defined(NO_VIZ)
+#ifdef HAVE_HIDDEN
 #  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
 #else
 #  define ZLIB_INTERNAL
@@ -27,7 +27,11 @@
 #endif
 #include <fcntl.h>
 
-#if defined(MSDOS) && defined(__TURBOC__)
+#ifdef _WIN32
+#  include <stddef.h>
+#endif
+
+#if defined(__TURBOC__) || defined(_MSC_VER) || defined(_WIN32)
 #  include <io.h>
 #endif
 
@@ -66,7 +70,6 @@
 /* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */
 #    if !defined(vsnprintf) && !defined(NO_vsnprintf)
 #      if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 )
-#         include <io.h>
 #         define vsnprintf _vsnprintf
 #      endif
 #    endif
@@ -101,7 +104,7 @@
 #  include <windows.h>
 #  define zstrerror() gz_strwinerror((DWORD)GetLastError())
 #else
-#  ifdef STDC
+#  ifndef NO_STRERROR
 #    include <errno.h>
 #    define zstrerror() strerror(errno)
 #  else

gzlib.c

@@ -1,11 +1,11 @@
 /* gzlib.c -- zlib functions common to reading and writing gzip files
- * Copyright (C) 2004, 2010, 2011 Mark Adler
+ * Copyright (C) 2004, 2010, 2011, 2012 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
 #include "gzguts.h"
 
-#if defined(_WIN32)
+#if defined(_WIN32) && !defined(__BORLANDC__)
 #  define LSEEK _lseeki64
 #else
 #if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
@@ -17,7 +17,7 @@
 
 /* Local functions */
 local void gz_reset OF((gz_statep));
-local gzFile gz_open OF((const char *, int, const char *));
+local gzFile gz_open OF((const void *, int, const char *));
 
 #if defined UNDER_CE
 
@@ -89,11 +89,19 @@ local void gz_reset(state)
 
 /* Open a gzip file either by name or file descriptor. */
 local gzFile gz_open(path, fd, mode)
-    const char *path;
+    const void *path;
     int fd;
     const char *mode;
 {
     gz_statep state;
+    size_t len;
+    int oflag;
+#ifdef O_CLOEXEC
+    int cloexec = 0;
+#endif
+#ifdef O_EXCL
+    int exclusive = 0;
+#endif
 
     /* check input */
     if (path == NULL)
@@ -133,6 +141,16 @@ local gzFile gz_open(path, fd, mode)
                 return NULL;
             case 'b':       /* ignore -- will request binary anyway */
                 break;
+#ifdef O_CLOEXEC
+            case 'e':
+                cloexec = 1;
+                break;
+#endif
+#ifdef O_EXCL
+            case 'x':
+                exclusive = 1;
+                break;
+#endif
             case 'f':
                 state->strategy = Z_FILTERED;
                 break;
@@ -168,29 +186,57 @@ local gzFile gz_open(path, fd, mode)
     }
 
     /* save the path name for error messages */
-    state->path = malloc(strlen(path) + 1);
+#ifdef _WIN32
+    if (fd == -2) {
+        len = wcstombs(NULL, path, 0);
+        if (len == (size_t)-1)
+            len = 0;
+    }
+    else
+#endif
+        len = strlen(path);
+    state->path = malloc(len + 1);
     if (state->path == NULL) {
         free(state);
         return NULL;
     }
-    strcpy(state->path, path);
+#ifdef _WIN32
+    if (fd == -2)
+        if (len)
+            wcstombs(state->path, path, len + 1);
+        else
+            *(state->path) = 0;
+    else
+#endif
+        strcpy(state->path, path);
 
-    /* open the file with the appropriate mode (or just use fd) */
+    /* compute the flags for open() */
-    state->fd = fd != -1 ? fd :
+    oflag =
-        open(path,
 #ifdef O_LARGEFILE
-            O_LARGEFILE |
+        O_LARGEFILE |
 #endif
 #ifdef O_BINARY
-            O_BINARY |
+        O_BINARY |
 #endif
-            (state->mode == GZ_READ ?
+#ifdef O_CLOEXEC
-                O_RDONLY :
+        (cloexec ? O_CLOEXEC : 0) |
-                (O_WRONLY | O_CREAT | (
+#endif
-                    state->mode == GZ_WRITE ?
+        (state->mode == GZ_READ ?
-                        O_TRUNC :
+         O_RDONLY :
-                        O_APPEND))),
+         (O_WRONLY | O_CREAT |
-            0666);
+#ifdef O_EXCL
+          (exclusive ? O_EXCL : 0) |
+#endif
+          (state->mode == GZ_WRITE ?
+           O_TRUNC :
+           O_APPEND)));
+
+    /* open the file with the appropriate flags (or just use fd) */
+    state->fd = fd > -1 ? fd : (
+#ifdef _WIN32
+        fd == -2 ? _wopen(path, oflag, 0666) :
+#endif
+        open(path, oflag, 0666));
     if (state->fd == -1) {
         free(state->path);
         free(state);
@@ -244,6 +290,16 @@ gzFile ZEXPORT gzdopen(fd, mode)
     return gz;
 }
 
+/* -- see zlib.h -- */
+#ifdef _WIN32
+gzFile ZEXPORT gzopen_w(path, mode)
+    const wchar_t *path;
+    const char *mode;
+{
+    return gz_open(path, -2, mode);
+}
+#endif
+
 /* -- see zlib.h -- */
 int ZEXPORT gzbuffer(file, size)
     gzFile file;

gzread.c

@@ -1,5 +1,5 @@
 /* gzread.c -- zlib functions for reading gzip files
- * Copyright (C) 2004, 2005, 2010, 2011 Mark Adler
+ * Copyright (C) 2004, 2005, 2010, 2011, 2012 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -57,8 +57,13 @@ local int gz_avail(state)
     if (state->err != Z_OK && state->err != Z_BUF_ERROR)
         return -1;
     if (state->eof == 0) {
-        if (strm->avail_in)
+        if (strm->avail_in) {       /* copy what's there to the start */
-            memmove(state->in, strm->next_in, strm->avail_in);
+            unsigned char *p = state->in, *q = strm->next_in;
+            unsigned n = strm->avail_in;
+            do {
+                *p++ = *q++;
+            } while (--n);
+        }
         if (gz_load(state, state->in + strm->avail_in,
                     state->size - strm->avail_in, &got) == -1)
             return -1;
@@ -340,7 +345,7 @@ int ZEXPORT gzread(file, buf, len)
             /* get more output, looking for header if required */
             if (gz_fetch(state) == -1)
                 return -1;
-            continue;       /* no progress yet -- go back to memcpy() above */
+            continue;       /* no progress yet -- go back to copy above */
             /* the copy above assures that we will leave with space in the
                output buffer, allowing at least one gzungetc() to succeed */
         }
@@ -373,7 +378,8 @@ int ZEXPORT gzread(file, buf, len)
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzgetc_(file)
+#undef gzgetc
+int ZEXPORT gzgetc(file)
     gzFile file;
 {
     int ret;
@@ -390,10 +396,7 @@ int ZEXPORT gzgetc_(file)
         (state->err != Z_OK && state->err != Z_BUF_ERROR))
         return -1;
 
-    /* try output buffer (no need to check for skip request) -- while
+    /* try output buffer (no need to check for skip request) */
-       this check really isn't required since the gzgetc() macro has
-       already determined that x.have is zero, we leave it in for
-       completeness. */
     if (state->x.have) {
         state->x.have--;
         state->x.pos++;
@@ -405,6 +408,12 @@ int ZEXPORT gzgetc_(file)
     return ret < 1 ? -1 : buf[0];
 }
 
+int ZEXPORT gzgetc_(file)
+gzFile file;
+{
+    return gzgetc(file);
+}
+
 /* -- see zlib.h -- */
 int ZEXPORT gzungetc(c, file)
     int c;

gzwrite.c

@@ -1,5 +1,5 @@
 /* gzwrite.c -- zlib functions for writing gzip files
- * Copyright (C) 2004, 2005, 2010, 2011 Mark Adler
+ * Copyright (C) 2004, 2005, 2010, 2011, 2012 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -272,14 +272,14 @@ int ZEXPORT gzputc(file, c)
             strm->next_in = state->in;
         strm->next_in[strm->avail_in++] = c;
         state->x.pos++;
-        return c;
+        return c & 0xff;
     }
 
     /* no room in buffer or not initialized, use gz_write() */
     buf[0] = c;
     if (gzwrite(file, buf, 1) != 1)
         return -1;
-    return c;
+    return c & 0xff;
 }
 
 /* -- see zlib.h -- */
@@ -338,19 +338,19 @@ int ZEXPORTVA gzprintf (gzFile file, const char *format, ...)
     va_start(va, format);
 #ifdef NO_vsnprintf
 #  ifdef HAS_vsprintf_void
-    (void)vsprintf(state->in, format, va);
+    (void)vsprintf((char *)(state->in), format, va);
     va_end(va);
     for (len = 0; len < size; len++)
         if (state->in[len] == 0) break;
 #  else
-    len = vsprintf(state->in, format, va);
+    len = vsprintf((char *)(state->in), format, va);
     va_end(va);
 #  endif
 #else
 #  ifdef HAS_vsnprintf_void
-    (void)vsnprintf(state->in, size, format, va);
+    (void)vsnprintf((char *)(state->in), size, format, va);
     va_end(va);
-    len = strlen(state->in);
+    len = strlen((char *)(state->in));
 #  else
     len = vsnprintf((char *)(state->in), size, format, va);
     va_end(va);
@@ -416,22 +416,23 @@ int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
     state->in[size - 1] = 0;
 #ifdef NO_snprintf
 #  ifdef HAS_sprintf_void
-    sprintf(state->in, format, a1, a2, a3, a4, a5, a6, a7, a8,
+    sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8,
             a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
     for (len = 0; len < size; len++)
         if (state->in[len] == 0) break;
 #  else
-    len = sprintf(state->in, format, a1, a2, a3, a4, a5, a6, a7, a8,
+    len = sprintf((char *)(state->in), format, a1, a2, a3, a4, a5, a6, a7, a8,
-                a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+                  a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
 #  endif
 #else
 #  ifdef HAS_snprintf_void
-    snprintf(state->in, size, format, a1, a2, a3, a4, a5, a6, a7, a8,
+    snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6, a7, a8,
              a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-    len = strlen(state->in);
+    len = strlen((char *)(state->in));
 #  else
-    len = snprintf(state->in, size, format, a1, a2, a3, a4, a5, a6, a7, a8,
+    len = snprintf((char *)(state->in), size, format, a1, a2, a3, a4, a5, a6,
-                 a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+                   a7, a8, a9, a10, a11, a12, a13, a14, a15, a16, a17, a18,
+                   a19, a20);
 #  endif
 #endif
 
@@ -546,13 +547,15 @@ int ZEXPORT gzclose_w(file)
     }
 
     /* flush, free memory, and close file */
-    if (gz_comp(state, Z_FINISH) == -1)
+    if (state->size) {
-        ret = state->err;
+        if (gz_comp(state, Z_FINISH) == -1)
-    if (!state->direct) {
+            ret = state->err;
-        (void)deflateEnd(&(state->strm));
+        if (!state->direct) {
-        free(state->out);
+            (void)deflateEnd(&(state->strm));
+            free(state->out);
+        }
+        free(state->in);
     }
-    free(state->in);
     gz_error(state, Z_OK, NULL);
     free(state->path);
     if (close(state->fd) == -1)
@@ -560,34 +563,3 @@ int ZEXPORT gzclose_w(file)
     free(state);
     return ret;
 }
-
-/* used by zlibVersion() to get the vsnprintf story from the horse's mouth */
-unsigned long ZEXPORT gzflags()
-{
-    unsigned long flags = 0;
-#if defined(STDC) || defined(Z_HAVE_STDARG_H)
-#  ifdef NO_vsnprintf
-    flags += 1L << 25;
-#    ifdef HAS_vsprintf_void
-    flags += 1L << 26;
-#    endif
-#  else
-#    ifdef HAS_vsnprintf_void
-    flags += 1L << 26;
-#    endif
-#  endif
-#else
-    flags += 1L << 24;
-#  ifdef NO_snprintf
-    flags += 1L << 25;
-#    ifdef HAS_sprintf_void
-    flags += 1L << 26;
-#    endif
-#  else
-#    ifdef HAS_snprintf_void
-    flags += 1L << 26;
-#    endif
-#  endif
-#endif
-    return flags;
-}

inflate.c

@@ -1,5 +1,5 @@
 /* inflate.c -- zlib decompression
- * Copyright (C) 1995-2011 Mark Adler
+ * Copyright (C) 1995-2012 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -519,11 +519,6 @@ unsigned out;
         bits -= bits & 7; \
     } while (0)
 
-/* Reverse the bytes in a 32-bit value */
-#define REVERSE(q) \
-    ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
-     (((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
-
 /*
    inflate() uses a state machine to process as much input data and generate as
    much output data as possible before returning.  The state machine is
@@ -817,7 +812,7 @@ int flush;
 #endif
         case DICTID:
             NEEDBITS(32);
-            strm->adler = state->check = REVERSE(hold);
+            strm->adler = state->check = ZSWAP32(hold);
             INITBITS();
             state->mode = DICT;
         case DICT:
@@ -1189,7 +1184,7 @@ int flush;
 #ifdef GUNZIP
                      state->flags ? hold :
 #endif
-                     REVERSE(hold)) != state->check) {
+                     ZSWAP32(hold)) != state->check) {
                     strm->msg = (char *)"incorrect data check";
                     state->mode = BAD;
                     break;
@@ -1275,7 +1270,7 @@ const Bytef *dictionary;
 uInt dictLength;
 {
     struct inflate_state FAR *state;
-    unsigned long id;
+    unsigned long dictid;
     unsigned char *next;
     unsigned avail;
     int ret;
@@ -1286,11 +1281,11 @@ uInt dictLength;
     if (state->wrap != 0 && state->mode != DICT)
         return Z_STREAM_ERROR;
 
-    /* check for correct dictionary id */
+    /* check for correct dictionary identifier */
     if (state->mode == DICT) {
-        id = adler32(0L, Z_NULL, 0);
+        dictid = adler32(0L, Z_NULL, 0);
-        id = adler32(id, dictionary, dictLength);
+        dictid = adler32(dictid, dictionary, dictLength);
-        if (id != state->check)
+        if (dictid != state->check)
             return Z_DATA_ERROR;
     }
 

inftrees.c

@@ -1,5 +1,5 @@
 /* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2011 Mark Adler
+ * Copyright (C) 1995-2012 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate_copyright[] =
-   " inflate 1.2.5.2 Copyright 1995-2011 Mark Adler ";
+   " inflate 1.2.7 Copyright 1995-2012 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -62,7 +62,7 @@ unsigned short FAR *work;
         35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
-        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 202, 194};
+        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 78, 68};
     static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
         257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,

make_vms.com

@@ -3,7 +3,7 @@ $! Martin P.J. Zinser
 $!
 $! In case of problems with the install you might contact me at
 $! zinser@zinser.no-ip.info(preferred) or
-$! zinser@sysdev.deutsche-boerse.com (work)
+$! martin.zinser@eurexchange.com (work)
 $!
 $! Make procedure history for Zlib
 $!
@@ -14,9 +14,16 @@ $! 0.02 20061008 Adapt to new Makefile.in
 $! 0.03 20091224 Add support for large file check
 $! 0.04 20100110 Add new gzclose, gzlib, gzread, gzwrite
 $! 0.05 20100221 Exchange zlibdefs.h by zconf.h.in
+$! 0.06 20120111 Fix missing amiss_err, update zconf_h.in, fix new exmples
+$!               subdir path, update module search in makefile.in
+$! 0.07 20120115 Triggered by work done by Alexey Chupahin completly redesigned
+$!               shared image creation
+$! 0.08 20120219 Make it work on VAX again, pre-load missing symbols to shared
+$!               image
+$! 0.09 20120305 SMS.  P1 sets builder ("MMK", "MMS", " " (built-in)).
+$!               "" -> automatic, preference: MMK, MMS, built-in.
 $!
 $ on error then goto err_exit
-$ set proc/parse=ext
 $!
 $ true  = 1
 $ false = 0
@@ -32,31 +39,43 @@ $ s_case   = False
 $!
 $! Setup variables holding "config" information
 $!
-$ Make    = ""
+$ Make    = "''p1'"
 $ name     = "Zlib"
 $ version  = "?.?.?"
 $ v_string = "ZLIB_VERSION"
 $ v_file   = "zlib.h"
-$ ccopt   = ""
+$ ccopt   = "/include = []"
 $ lopts   = ""
 $ dnsrl   = ""
-$ aconf_in_file = "zconf.h.in#zconf.h_in"
+$ aconf_in_file = "zconf.h.in#zconf.h_in#zconf_h.in"
 $ conf_check_string = ""
 $ linkonly = false
 $ optfile  = name + ".opt"
+$ mapfile  = name + ".map"
 $ libdefs  = ""
+$ vax      = f$getsyi("HW_MODEL").lt.1024
 $ axp      = f$getsyi("HW_MODEL").ge.1024 .and. f$getsyi("HW_MODEL").lt.4096
+$ ia64     = f$getsyi("HW_MODEL").ge.4096
 $!
-$ whoami = f$parse(f$enviornment("Procedure"),,,,"NO_CONCEAL")
+$! 2012-03-05 SMS.
+$! Why is this needed?  And if it is needed, why not simply ".not. vax"?
+$!
+$!!! if axp .or. ia64 then  set proc/parse=extended
+$!
+$ whoami = f$parse(f$environment("Procedure"),,,,"NO_CONCEAL")
 $ mydef  = F$parse(whoami,,,"DEVICE")
 $ mydir  = f$parse(whoami,,,"DIRECTORY") - "]["
 $ myproc = f$parse(whoami,,,"Name") + f$parse(whoami,,,"type")
 $!
 $! Check for MMK/MMS
 $!
-$ If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS"
+$ if (Make .eqs. "")
-$ If F$Type (MMK) .eqs. "STRING" Then Make = "MMK"
+$ then
-$!
+$   If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS"
+$   If F$Type (MMK) .eqs. "STRING" Then Make = "MMK"
+$ else
+$   Make = f$edit( Make, "trim")
+$ endif
 $!
 $ gosub find_version
 $!
@@ -69,6 +88,7 @@ $! Look for the compiler used
 $!
 $ gosub check_compiler
 $ close topt
+$ close optf
 $!
 $ if its_decc
 $ then
@@ -83,6 +103,15 @@ $       ccopt = "/decc" + ccopt
 $       define sys decc$library_include:
 $     endif
 $   endif
+$!
+$! 2012-03-05 SMS.
+$! Why /NAMES = AS_IS?  Why not simply ".not. vax"?  And why not on VAX?
+$!
+$   if axp .or. ia64
+$   then
+$       ccopt = ccopt + "/name=as_is/opt=(inline=speed)"
+$       s_case = true
+$   endif
 $ endif
 $ if its_vaxc .or. its_gnuc
 $ then
@@ -122,15 +151,20 @@ $   gosub check_config
 $ endif
 $ goto aconf_loop
 $ACONF_EXIT:
+$ write aconf ""
+$ write aconf "/* VMS specifics added by make_vms.com: */"
 $ write aconf "#define VMS 1"
 $ write aconf "#include <unistd.h>"
 $ write aconf "#include <unixio.h>"
 $ write aconf "#ifdef _LARGEFILE"
-$ write aconf "#define off64_t __off64_t"
+$ write aconf "# define off64_t __off64_t"
-$ write aconf "#define fopen64 fopen"
+$ write aconf "# define fopen64 fopen"
-$ write aconf "#define fseeko64 fseeko"
+$ write aconf "# define fseeko64 fseeko"
-$ write aconf "#define lseek64 lseek"
+$ write aconf "# define lseek64 lseek"
-$ write aconf "#define ftello64 ftell"
+$ write aconf "# define ftello64 ftell"
+$ write aconf "#endif"
+$ write aconf "#if !defined( __VAX) && (__CRTL_VER >= 70312000)"
+$ write aconf "# define HAVE_VSNPRINTF"
 $ write aconf "#endif"
 $ close aconf_in
 $ close aconf
@@ -139,8 +173,9 @@ $! Build the thing plain or with mms
 $!
 $ write sys$output "Compiling Zlib sources ..."
 $ if make.eqs.""
-$  then
+$ then
-$   dele example.obj;*,minigzip.obj;*
+$   if (f$search( "example.obj;*") .nes. "") then delete example.obj;*
+$   if (f$search( "minigzip.obj;*") .nes. "") then delete minigzip.obj;*
 $   CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" -
                 adler32.c zlib.h zconf.h
 $   CALL MAKE compress.OBJ "CC ''CCOPT' compress" -
@@ -174,41 +209,34 @@ $   CALL MAKE zutil.OBJ "CC ''CCOPT' zutil" -
 $   write sys$output "Building Zlib ..."
 $   CALL MAKE libz.OLB "lib/crea libz.olb *.obj" *.OBJ
 $   write sys$output "Building example..."
-$   CALL MAKE example.OBJ "CC ''CCOPT' example" -
+$   CALL MAKE example.OBJ "CC ''CCOPT' [.test]example" -
-                test/example.c zlib.h zconf.h
+                [.test]example.c zlib.h zconf.h
 $   call make example.exe "LINK example,libz.olb/lib" example.obj libz.olb
-$   if f$search("x11vms:xvmsutils.olb") .nes. ""
+$   write sys$output "Building minigzip..."
-$   then
+$   CALL MAKE minigzip.OBJ "CC ''CCOPT' [.test]minigzip" -
-$     write sys$output "Building minigzip..."
+              [.test]minigzip.c zlib.h zconf.h
-$     CALL MAKE minigzip.OBJ "CC ''CCOPT' minigzip" -
+$   call make minigzip.exe -
-                test/minigzip.c zlib.h zconf.h
+              "LINK minigzip,libz.olb/lib" -
-$     call make minigzip.exe -
+              minigzip.obj libz.olb
-                "LINK minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib" -
+$ else
-                minigzip.obj libz.olb
-$   endif
-$  else
 $   gosub crea_mms
 $   write sys$output "Make ''name' ''version' with ''Make' "
 $   'make'
-$  endif
-$!
-$! Alpha gets a shareable image
-$!
-$ If axp
-$ Then
-$   gosub crea_olist
-$   write sys$output "Creating libzshr.exe"
-$   call anal_obj_axp modules.opt _link.opt
-$   if s_case
-$   then
-$      open/append optf modules.opt
-$      write optf "case_sensitive=YES"
-$      close optf
-$   endif
-$   LINK_'lopts'/SHARE=libzshr.exe modules.opt/opt,_link.opt/opt
 $ endif
+$!
+$! Create shareable image
+$!
+$ gosub crea_olist
+$ write sys$output "Creating libzshr.exe"
+$ call map_2_shopt 'mapfile' 'optfile'
+$ LINK_'lopts'/SHARE=libzshr.exe modules.opt/opt,'optfile'/opt
 $ write sys$output "Zlib build completed"
+$ delete/nolog tmp.opt;*
 $ exit
+$AMISS_ERR:
+$ write sys$output "No source for config.hin found."
+$ write sys$output "Tried any of ''aconf_in_file'"
+$ goto err_exit
 $CC_ERR:
 $ write sys$output "C compiler required to build ''name'"
 $ goto err_exit
@@ -216,7 +244,6 @@ $ERR_EXIT:
 $ set message/facil/ident/sever/text
 $ close/nolog optf
 $ close/nolog topt
-$ close/nolog conf_hin
 $ close/nolog aconf_in
 $ close/nolog aconf
 $ close/nolog out
@@ -397,7 +424,7 @@ $ copy sys$input: out
 $ deck
 # descrip.mms: MMS description file for building zlib on VMS
 # written by Martin P.J. Zinser
-# <zinser@zinser.no-ip.info or zinser@sysdev.deutsche-boerse.com>
+# <zinser@zinser.no-ip.info or martin.zinser@eurexchange.com>
 
 OBJS = adler32.obj, compress.obj, crc32.obj, gzclose.obj, gzlib.obj\
        gzread.obj, gzwrite.obj, uncompr.obj, infback.obj\
@@ -407,10 +434,9 @@ OBJS = adler32.obj, compress.obj, crc32.obj, gzclose.obj, gzlib.obj\
 $ eod
 $ write out "CFLAGS=", ccopt
 $ write out "LOPTS=", lopts
+$ write out "all : example.exe minigzip.exe libz.olb"
 $ copy sys$input: out
 $ deck
-
-all : example.exe minigzip.exe libz.olb
         @ write sys$output " Example applications available"
 
 libz.olb : libz.olb($(OBJS))
@@ -420,7 +446,7 @@ example.exe : example.obj libz.olb
               link $(LOPTS) example,libz.olb/lib
 
 minigzip.exe : minigzip.obj libz.olb
-              link $(LOPTS) minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib
+              link $(LOPTS) minigzip,libz.olb/lib
 
 clean :
 	delete *.obj;*,libz.olb;*,*.opt;*,*.exe;*
@@ -431,7 +457,7 @@ adler32.obj  : adler32.c zutil.h zlib.h zconf.h
 compress.obj : compress.c zlib.h zconf.h
 crc32.obj    : crc32.c zutil.h zlib.h zconf.h
 deflate.obj  : deflate.c deflate.h zutil.h zlib.h zconf.h
-example.obj  : test/example.c zlib.h zconf.h
+example.obj  : [.test]example.c zlib.h zconf.h
 gzclose.obj  : gzclose.c zutil.h zlib.h zconf.h
 gzlib.obj    : gzlib.c zutil.h zlib.h zconf.h
 gzread.obj   : gzread.c zutil.h zlib.h zconf.h
@@ -439,7 +465,7 @@ gzwrite.obj  : gzwrite.c zutil.h zlib.h zconf.h
 inffast.obj  : inffast.c zutil.h zlib.h zconf.h inftrees.h inffast.h
 inflate.obj  : inflate.c zutil.h zlib.h zconf.h
 inftrees.obj : inftrees.c zutil.h zlib.h zconf.h inftrees.h
-minigzip.obj : test/minigzip.c zlib.h zconf.h
+minigzip.obj : [.test]minigzip.c zlib.h zconf.h
 trees.obj    : trees.c deflate.h zutil.h zlib.h zconf.h
 uncompr.obj  : uncompr.c zlib.h zconf.h
 zutil.obj    : zutil.c zutil.h zlib.h zconf.h
@@ -455,13 +481,18 @@ $!
 $CREA_OLIST:
 $ open/read min makefile.in
 $ open/write mod modules.opt
-$ src_check = "OBJC ="
+$ src_check_list = "OBJZ =#OBJG ="
 $MRLOOP:
 $ read/end=mrdone min rec
-$ if (f$extract(0,6,rec) .nes. src_check) then goto mrloop
+$ i = 0
+$SRC_CHECK_LOOP:
+$ src_check = f$element(i, "#", src_check_list)
+$ i = i+1
+$ if src_check .eqs. "#" then goto mrloop
+$ if (f$extract(0,6,rec) .nes. src_check) then goto src_check_loop
 $ rec = rec - src_check
 $ gosub extra_filnam
-$ if (f$element(1,"\",rec) .eqs. "\") then goto mrdone
+$ if (f$element(1,"\",rec) .eqs. "\") then goto mrloop
 $MRSLOOP:
 $ read/end=mrdone min rec
 $ gosub extra_filnam
@@ -672,124 +703,6 @@ $ endif
 $ return
 $!------------------------------------------------------------------------------
 $!
-$! Analyze Object files for OpenVMS AXP to extract Procedure and Data
-$! information to build a symbol vector for a shareable image
-$! All the "brains" of this logic was suggested by Hartmut Becker
-$! (Hartmut.Becker@compaq.com). All the bugs were introduced by me
-$! (zinser@zinser.no-ip.info), so if you do have problem reports please do not
-$! bother Hartmut/HP, but get in touch with me
-$!
-$! Version history
-$! 0.01 20040406 Skip over shareable images in option file
-$! 0.02 20041109 Fix option file for shareable images with case_sensitive=YES
-$! 0.03 20050107 Skip over Identification labels in option file
-$! 0.04 20060117 Add uppercase alias to code compiled with /name=as_is
-$!
-$ ANAL_OBJ_AXP: Subroutine
-$ V = 'F$Verify(0)
-$ SAY := "WRITE_ SYS$OUTPUT"
-$
-$ IF F$SEARCH("''P1'") .EQS. ""
-$ THEN
-$    SAY "ANAL_OBJ_AXP-E-NOSUCHFILE:  Error, inputfile ''p1' not available"
-$    goto exit_aa
-$ ENDIF
-$ IF "''P2'" .EQS. ""
-$ THEN
-$    SAY "ANAL_OBJ_AXP:  Error, no output file provided"
-$    goto exit_aa
-$ ENDIF
-$
-$ open/read in 'p1
-$ create a.tmp
-$ open/append atmp a.tmp
-$ loop:
-$ read/end=end_loop in line
-$ if f$locate("/SHARE",f$edit(line,"upcase")) .lt. f$length(line)
-$ then
-$   write sys$output "ANAL_SKP_SHR-i-skipshare, ''line'"
-$   goto loop
-$ endif
-$ if f$locate("IDENTIFICATION=",f$edit(line,"upcase")) .lt. f$length(line)
-$ then
-$   write sys$output "ANAL_OBJ_AXP-i-ident: Identification ", -
-                     f$element(1,"=",line)
-$   goto loop
-$ endif
-$ f= f$search(line)
-$ if f .eqs. ""
-$ then
-$	write sys$output "ANAL_OBJ_AXP-w-nosuchfile, ''line'"
-$	goto loop
-$ endif
-$ define/user sys$output nl:
-$ define/user sys$error nl:
-$ anal/obj/gsd 'f /out=x.tmp
-$ open/read xtmp x.tmp
-$ XLOOP:
-$ read/end=end_xloop xtmp xline
-$ xline = f$edit(xline,"compress")
-$ write atmp xline
-$ goto xloop
-$ END_XLOOP:
-$ close xtmp
-$ goto loop
-$ end_loop:
-$ close in
-$ close atmp
-$ if f$search("a.tmp") .eqs. "" -
-	then $ exit
-$ ! all global definitions
-$ search a.tmp "symbol:","EGSY$V_DEF 1","EGSY$V_NORM 1"/out=b.tmp
-$ ! all procedures
-$ search b.tmp "EGSY$V_NORM 1"/wind=(0,1) /out=c.tmp
-$ search c.tmp "symbol:"/out=d.tmp
-$ define/user sys$output nl:
-$ edito/edt/command=sys$input d.tmp
-sub/symbol: "/symbol_vector=(/whole
-sub/"/=PROCEDURE)/whole
-exit
-$ ! all data
-$ search b.tmp "EGSY$V_DEF 1"/wind=(0,1) /out=e.tmp
-$ search e.tmp "symbol:"/out=f.tmp
-$ define/user sys$output nl:
-$ edito/edt/command=sys$input f.tmp
-sub/symbol: "/symbol_vector=(/whole
-sub/"/=DATA)/whole
-exit
-$ sort/nodupl d.tmp,f.tmp g.tmp
-$ open/read raw_vector g.tmp
-$ open/write case_vector 'p2'
-$ RAWLOOP:
-$ read/end=end_rawloop raw_vector raw_element
-$ write case_vector raw_element
-$ if f$locate("=PROCEDURE)",raw_element) .lt. f$length(raw_element)
-$ then
-$     name = f$element(1,"=",raw_element) - "("
-$     if f$edit(name,"UPCASE") .nes. name then -
-          write case_vector f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)", -
-	                          f$edit(name,"UPCASE"), name)
-$ endif
-$ if f$locate("=DATA)",raw_element) .lt. f$length(raw_element)
-$ then
-$     name = f$element(1,"=",raw_element) - "("
-$     if f$edit(name,"UPCASE") .nes. name then -
-          write case_vector f$fao(" symbol_vector=(!AS/!AS=DATA)", -
-	                          f$edit(name,"UPCASE"), name)
-$ endif
-$ goto rawloop
-$ END_RAWLOOP:
-$ close raw_vector
-$ close case_vector
-$ delete a.tmp;*,b.tmp;*,c.tmp;*,d.tmp;*,e.tmp;*,f.tmp;*,g.tmp;*
-$ if f$search("x.tmp") .nes. "" -
-	then $ delete x.tmp;*
-$!
-$ EXIT_AA:
-$ if V then set verify
-$ endsubroutine
-$!------------------------------------------------------------------------------
-$!
 $! Write configuration to both permanent and temporary config file
 $!
 $! Version history
@@ -802,3 +715,153 @@ $  write confh 'p1'
 $  close confh
 $ENDSUBROUTINE
 $!------------------------------------------------------------------------------
+$!
+$! Analyze the project map file and create the symbol vector for a shareable
+$! image from it
+$!
+$! Version history
+$! 0.01 20120128 First version
+$! 0.02 20120226 Add pre-load logic
+$!
+$ MAP_2_SHOPT: Subroutine
+$!
+$ SAY := "WRITE_ SYS$OUTPUT"
+$!
+$ IF F$SEARCH("''P1'") .EQS. ""
+$ THEN
+$    SAY "MAP_2_SHOPT-E-NOSUCHFILE:  Error, inputfile ''p1' not available"
+$    goto exit_m2s
+$ ENDIF
+$ IF "''P2'" .EQS. ""
+$ THEN
+$    SAY "MAP_2_SHOPT:  Error, no output file provided"
+$    goto exit_m2s
+$ ENDIF
+$!
+$ module1 = "deflate#deflateEnd#deflateInit_#deflateParams#deflateSetDictionary"
+$ module2 = "gzclose#gzerror#gzgetc#gzgets#gzopen#gzprintf#gzputc#gzputs#gzread"
+$ module3 = "gzseek#gztell#inflate#inflateEnd#inflateInit_#inflateSetDictionary"
+$ module4 = "inflateSync#uncompress#zlibVersion#compress"
+$ open/read map 'p1
+$ if axp .or. ia64
+$ then
+$     open/write aopt a.opt
+$     open/write bopt b.opt
+$     write aopt " CASE_SENSITIVE=YES"
+$     write bopt "SYMBOL_VECTOR= (-"
+$     mod_sym_num = 1
+$ MOD_SYM_LOOP:
+$     if f$type(module'mod_sym_num') .nes. ""
+$     then
+$         mod_in = 0
+$ MOD_SYM_IN:
+$         shared_proc = f$element(mod_in, "#", module'mod_sym_num')
+$         if shared_proc .nes. "#"
+$         then
+$             write aopt f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)",-
+        		       f$edit(shared_proc,"upcase"),shared_proc)
+$             write bopt f$fao("!AS=PROCEDURE,-",shared_proc)
+$             mod_in = mod_in + 1
+$             goto mod_sym_in
+$         endif
+$         mod_sym_num = mod_sym_num + 1
+$         goto mod_sym_loop
+$     endif
+$MAP_LOOP:
+$     read/end=map_end map line
+$     if (f$locate("{",line).lt. f$length(line)) .or. -
+         (f$locate("global:", line) .lt. f$length(line))
+$     then
+$         proc = true
+$         goto map_loop
+$     endif
+$     if f$locate("}",line).lt. f$length(line) then proc = false
+$     if f$locate("local:", line) .lt. f$length(line) then proc = false
+$     if proc
+$     then
+$         shared_proc = f$edit(line,"collapse")
+$         chop_semi = f$locate(";", shared_proc)
+$         if chop_semi .lt. f$length(shared_proc) then -
+              shared_proc = f$extract(0, chop_semi, shared_proc)
+$         write aopt f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)",-
+        			 f$edit(shared_proc,"upcase"),shared_proc)
+$         write bopt f$fao("!AS=PROCEDURE,-",shared_proc)
+$     endif
+$     goto map_loop
+$MAP_END:
+$     close/nolog aopt
+$     close/nolog bopt
+$     open/append libopt 'p2'
+$     open/read aopt a.opt
+$     open/read bopt b.opt
+$ALOOP:
+$     read/end=aloop_end aopt line
+$     write libopt line
+$     goto aloop
+$ALOOP_END:
+$     close/nolog aopt
+$     sv = ""
+$BLOOP:
+$     read/end=bloop_end bopt svn
+$     if (svn.nes."")
+$     then
+$        if (sv.nes."") then write libopt sv
+$        sv = svn
+$     endif
+$     goto bloop
+$BLOOP_END:
+$     write libopt f$extract(0,f$length(sv)-2,sv), "-"
+$     write libopt ")"
+$     close/nolog bopt
+$     delete/nolog/noconf a.opt;*,b.opt;*
+$ else
+$     if vax
+$     then
+$     open/append libopt 'p2'
+$     mod_sym_num = 1
+$ VMOD_SYM_LOOP:
+$     if f$type(module'mod_sym_num') .nes. ""
+$     then
+$         mod_in = 0
+$ VMOD_SYM_IN:
+$         shared_proc = f$element(mod_in, "#", module'mod_sym_num')
+$         if shared_proc .nes. "#"
+$         then
+$     	      write libopt f$fao("UNIVERSAL=!AS",-
+      	  			     f$edit(shared_proc,"upcase"))
+$             mod_in = mod_in + 1
+$             goto vmod_sym_in
+$         endif
+$         mod_sym_num = mod_sym_num + 1
+$         goto vmod_sym_loop
+$     endif
+$VMAP_LOOP:
+$     	  read/end=vmap_end map line
+$     	  if (f$locate("{",line).lt. f$length(line)) .or. -
+   	      (f$locate("global:", line) .lt. f$length(line))
+$     	  then
+$     	      proc = true
+$     	      goto vmap_loop
+$     	  endif
+$     	  if f$locate("}",line).lt. f$length(line) then proc = false
+$     	  if f$locate("local:", line) .lt. f$length(line) then proc = false
+$     	  if proc
+$     	  then
+$     	      shared_proc = f$edit(line,"collapse")
+$     	      chop_semi = f$locate(";", shared_proc)
+$     	      if chop_semi .lt. f$length(shared_proc) then -
+      	  	  shared_proc = f$extract(0, chop_semi, shared_proc)
+$     	      write libopt f$fao("UNIVERSAL=!AS",-
+      	  			     f$edit(shared_proc,"upcase"))
+$     	  endif
+$     	  goto vmap_loop
+$VMAP_END:
+$     else
+$         write sys$output "Unknown Architecture (Not VAX, AXP, or IA64)"
+$         write sys$output "No options file created"
+$     endif
+$ endif
+$ EXIT_M2S:
+$ close/nolog map
+$ close/nolog libopt
+$ endsubroutine

old/visualc6/README.txt

@@ -1,73 +0,0 @@
-Microsoft Developer Studio Project Files, Format Version 6.00 for zlib.
-
-Copyright (C) 2000-2004 Simon-Pierre Cadieux.
-Copyright (C) 2004 Cosmin Truta.
-For conditions of distribution and use, see copyright notice in zlib.h.
-
-
-This project builds the zlib binaries as follows:
-
-* Win32_DLL_Release\zlib1.dll       DLL build
-* Win32_DLL_Debug\zlib1d.dll        DLL build (debug version)
-* Win32_DLL_ASM_Release\zlib1.dll   DLL build using ASM code
-* Win32_DLL_ASM_Debug\zlib1d.dll    DLL build using ASM code (debug version)
-* Win32_LIB_Release\zlib.lib        static build
-* Win32_LIB_Debug\zlibd.lib         static build (debug version)
-* Win32_LIB_ASM_Release\zlib.lib    static build using ASM code
-* Win32_LIB_ASM_Debug\zlibd.lib     static build using ASM code (debug version)
-
-
-For more information regarding the DLL builds, please see the DLL FAQ
-in ..\..\win32\DLL_FAQ.txt.
-
-
-To build and test:
-
-1) On the main menu, select "File | Open Workspace".
-   Open "zlib.dsw".
-
-2) Select "Build | Set Active Configuration".
-   Choose the configuration you wish to build.
-
-3) Select "Build | Clean".
-
-4) Select "Build | Build ... (F7)".  Ignore warning messages about
-   not being able to find certain include files (e.g. alloc.h).
-
-5) If you built one of the sample programs (example or minigzip),
-   select "Build | Execute ... (Ctrl+F5)".
-
-
-To use:
-
-1) Select "Project | Settings (Alt+F7)".
-   Make note of the configuration names used in your project.
-   Usually, these names are "Win32 Release" and "Win32 Debug".
-
-2) In the Workspace window, select the "FileView" tab.
-   Right-click on the root item "Workspace '...'".
-   Select "Insert Project into Workspace".
-   Switch on the checkbox "Dependency of:", and select the name
-   of your project.  Open "zlib.dsp".
-
-3) Select "Build | Configurations".
-   For each configuration of your project:
-   3.1) Choose the zlib configuration you wish to use.
-   3.2) Click on "Add".
-   3.3) Set the new zlib configuration name to the name used by
-        the configuration from the current iteration.
-
-4) Select "Build | Set Active Configuration".
-   Choose the configuration you wish to build.
-
-5) Select "Build | Build ... (F7)".
-
-6) If you built an executable program, select
-   "Build | Execute ... (Ctrl+F5)".
-
-
-Note:
-
-To build the ASM-enabled code, you need Microsoft Assembler
-(ML.EXE).  You can get it by downloading and installing the
-latest Processor Pack for Visual C++ 6.0.

old/visualc6/example.dsp

@@ -1,278 +0,0 @@
-# Microsoft Developer Studio Project File - Name="example" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Console Application" 0x0103
-
-CFG=example - Win32 LIB Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE
-!MESSAGE NMAKE /f "example.mak".
-!MESSAGE
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE
-!MESSAGE NMAKE /f "example.mak" CFG="example - Win32 LIB Debug"
-!MESSAGE
-!MESSAGE Possible choices for configuration are:
-!MESSAGE
-!MESSAGE "example - Win32 DLL ASM Release" (based on "Win32 (x86) Console Application")
-!MESSAGE "example - Win32 DLL ASM Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE "example - Win32 DLL Release" (based on "Win32 (x86) Console Application")
-!MESSAGE "example - Win32 DLL Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE "example - Win32 LIB ASM Release" (based on "Win32 (x86) Console Application")
-!MESSAGE "example - Win32 LIB ASM Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE "example - Win32 LIB Release" (based on "Win32 (x86) Console Application")
-!MESSAGE "example - Win32 LIB Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "example - Win32 DLL ASM Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "example___Win32_DLL_ASM_Release"
-# PROP BASE Intermediate_Dir "example___Win32_DLL_ASM_Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Win32_DLL_ASM_Release"
-# PROP Intermediate_Dir "Win32_DLL_ASM_Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
-# SUBTRACT BASE CPP /YX
-# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
-# SUBTRACT CPP /YX
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 /nologo /subsystem:console /machine:I386
-
-!ELSEIF  "$(CFG)" == "example - Win32 DLL ASM Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "example___Win32_DLL_ASM_Debug"
-# PROP BASE Intermediate_Dir "example___Win32_DLL_ASM_Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Win32_DLL_ASM_Debug"
-# PROP Intermediate_Dir "Win32_DLL_ASM_Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
-# SUBTRACT BASE CPP /YX
-# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
-# SUBTRACT CPP /YX
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-
-!ELSEIF  "$(CFG)" == "example - Win32 DLL Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "example___Win32_DLL_Release"
-# PROP BASE Intermediate_Dir "example___Win32_DLL_Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Win32_DLL_Release"
-# PROP Intermediate_Dir "Win32_DLL_Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
-# SUBTRACT BASE CPP /YX
-# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
-# SUBTRACT CPP /YX
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 /nologo /subsystem:console /machine:I386
-
-!ELSEIF  "$(CFG)" == "example - Win32 DLL Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "example___Win32_DLL_Debug"
-# PROP BASE Intermediate_Dir "example___Win32_DLL_Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Win32_DLL_Debug"
-# PROP Intermediate_Dir "Win32_DLL_Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
-# SUBTRACT BASE CPP /YX
-# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
-# SUBTRACT CPP /YX
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-
-!ELSEIF  "$(CFG)" == "example - Win32 LIB ASM Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "example___Win32_LIB_ASM_Release"
-# PROP BASE Intermediate_Dir "example___Win32_LIB_ASM_Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Win32_LIB_ASM_Release"
-# PROP Intermediate_Dir "Win32_LIB_ASM_Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
-# SUBTRACT BASE CPP /YX
-# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
-# SUBTRACT CPP /YX
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 /nologo /subsystem:console /machine:I386
-
-!ELSEIF  "$(CFG)" == "example - Win32 LIB ASM Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "example___Win32_LIB_ASM_Debug"
-# PROP BASE Intermediate_Dir "example___Win32_LIB_ASM_Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Win32_LIB_ASM_Debug"
-# PROP Intermediate_Dir "Win32_LIB_ASM_Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
-# SUBTRACT BASE CPP /YX
-# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
-# SUBTRACT CPP /YX
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-
-!ELSEIF  "$(CFG)" == "example - Win32 LIB Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "example___Win32_LIB_Release"
-# PROP BASE Intermediate_Dir "example___Win32_LIB_Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Win32_LIB_Release"
-# PROP Intermediate_Dir "Win32_LIB_Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
-# SUBTRACT BASE CPP /YX
-# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
-# SUBTRACT CPP /YX
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 /nologo /subsystem:console /machine:I386
-
-!ELSEIF  "$(CFG)" == "example - Win32 LIB Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "example___Win32_LIB_Debug"
-# PROP BASE Intermediate_Dir "example___Win32_LIB_Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Win32_LIB_Debug"
-# PROP Intermediate_Dir "Win32_LIB_Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
-# SUBTRACT BASE CPP /YX
-# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
-# SUBTRACT CPP /YX
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-
-!ENDIF
-
-# Begin Target
-
-# Name "example - Win32 DLL ASM Release"
-# Name "example - Win32 DLL ASM Debug"
-# Name "example - Win32 DLL Release"
-# Name "example - Win32 DLL Debug"
-# Name "example - Win32 LIB ASM Release"
-# Name "example - Win32 LIB ASM Debug"
-# Name "example - Win32 LIB Release"
-# Name "example - Win32 LIB Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE=..\..\test\example.c
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# Begin Source File
-
-SOURCE=..\..\zconf.h
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\zlib.h
-# End Source File
-# End Group
-# End Target
-# End Project

old/visualc6/minigzip.dsp

@@ -1,278 +0,0 @@
-# Microsoft Developer Studio Project File - Name="minigzip" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Console Application" 0x0103
-
-CFG=minigzip - Win32 LIB Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE
-!MESSAGE NMAKE /f "minigzip.mak".
-!MESSAGE
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE
-!MESSAGE NMAKE /f "minigzip.mak" CFG="minigzip - Win32 LIB Debug"
-!MESSAGE
-!MESSAGE Possible choices for configuration are:
-!MESSAGE
-!MESSAGE "minigzip - Win32 DLL ASM Release" (based on "Win32 (x86) Console Application")
-!MESSAGE "minigzip - Win32 DLL ASM Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE "minigzip - Win32 DLL Release" (based on "Win32 (x86) Console Application")
-!MESSAGE "minigzip - Win32 DLL Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE "minigzip - Win32 LIB ASM Release" (based on "Win32 (x86) Console Application")
-!MESSAGE "minigzip - Win32 LIB ASM Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE "minigzip - Win32 LIB Release" (based on "Win32 (x86) Console Application")
-!MESSAGE "minigzip - Win32 LIB Debug" (based on "Win32 (x86) Console Application")
-!MESSAGE
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF  "$(CFG)" == "minigzip - Win32 DLL ASM Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "minigzip___Win32_DLL_ASM_Release"
-# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_ASM_Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Win32_DLL_ASM_Release"
-# PROP Intermediate_Dir "Win32_DLL_ASM_Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
-# SUBTRACT BASE CPP /YX
-# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
-# SUBTRACT CPP /YX
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 /nologo /subsystem:console /machine:I386
-
-!ELSEIF  "$(CFG)" == "minigzip - Win32 DLL ASM Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "minigzip___Win32_DLL_ASM_Debug"
-# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_ASM_Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Win32_DLL_ASM_Debug"
-# PROP Intermediate_Dir "Win32_DLL_ASM_Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
-# SUBTRACT BASE CPP /YX
-# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
-# SUBTRACT CPP /YX
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-
-!ELSEIF  "$(CFG)" == "minigzip - Win32 DLL Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "minigzip___Win32_DLL_Release"
-# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Win32_DLL_Release"
-# PROP Intermediate_Dir "Win32_DLL_Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
-# SUBTRACT BASE CPP /YX
-# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
-# SUBTRACT CPP /YX
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 /nologo /subsystem:console /machine:I386
-
-!ELSEIF  "$(CFG)" == "minigzip - Win32 DLL Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "minigzip___Win32_DLL_Debug"
-# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Win32_DLL_Debug"
-# PROP Intermediate_Dir "Win32_DLL_Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
-# SUBTRACT BASE CPP /YX
-# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
-# SUBTRACT CPP /YX
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-
-!ELSEIF  "$(CFG)" == "minigzip - Win32 LIB ASM Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "minigzip___Win32_LIB_ASM_Release"
-# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_ASM_Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Win32_LIB_ASM_Release"
-# PROP Intermediate_Dir "Win32_LIB_ASM_Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
-# SUBTRACT BASE CPP /YX
-# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
-# SUBTRACT CPP /YX
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 /nologo /subsystem:console /machine:I386
-
-!ELSEIF  "$(CFG)" == "minigzip - Win32 LIB ASM Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "minigzip___Win32_LIB_ASM_Debug"
-# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_ASM_Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Win32_LIB_ASM_Debug"
-# PROP Intermediate_Dir "Win32_LIB_ASM_Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
-# SUBTRACT BASE CPP /YX
-# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
-# SUBTRACT CPP /YX
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-
-!ELSEIF  "$(CFG)" == "minigzip - Win32 LIB Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "minigzip___Win32_LIB_Release"
-# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Win32_LIB_Release"
-# PROP Intermediate_Dir "Win32_LIB_Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
-# SUBTRACT BASE CPP /YX
-# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
-# SUBTRACT CPP /YX
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
-# ADD LINK32 /nologo /subsystem:console /machine:I386
-
-!ELSEIF  "$(CFG)" == "minigzip - Win32 LIB Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "minigzip___Win32_LIB_Debug"
-# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Win32_LIB_Debug"
-# PROP Intermediate_Dir "Win32_LIB_Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
-# SUBTRACT BASE CPP /YX
-# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
-# SUBTRACT CPP /YX
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
-
-!ENDIF
-
-# Begin Target
-
-# Name "minigzip - Win32 DLL ASM Release"
-# Name "minigzip - Win32 DLL ASM Debug"
-# Name "minigzip - Win32 DLL Release"
-# Name "minigzip - Win32 DLL Debug"
-# Name "minigzip - Win32 LIB ASM Release"
-# Name "minigzip - Win32 LIB ASM Debug"
-# Name "minigzip - Win32 LIB Release"
-# Name "minigzip - Win32 LIB Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE=..\..\minigzip.c
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# Begin Source File
-
-SOURCE=..\..\zconf.h
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\zlib.h
-# End Source File
-# End Group
-# End Target
-# End Project

old/visualc6/zlib.dsp

@@ -1,621 +0,0 @@
-# Microsoft Developer Studio Project File - Name="zlib" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102
-# TARGTYPE "Win32 (x86) Static Library" 0x0104
-
-CFG=zlib - Win32 LIB Debug
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE
-!MESSAGE NMAKE /f "zlib.mak".
-!MESSAGE
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE
-!MESSAGE NMAKE /f "zlib.mak" CFG="zlib - Win32 LIB Debug"
-!MESSAGE
-!MESSAGE Possible choices for configuration are:
-!MESSAGE
-!MESSAGE "zlib - Win32 DLL ASM Release" (based on "Win32 (x86) Dynamic-Link Library")
-!MESSAGE "zlib - Win32 DLL ASM Debug" (based on "Win32 (x86) Dynamic-Link Library")
-!MESSAGE "zlib - Win32 DLL Release" (based on "Win32 (x86) Dynamic-Link Library")
-!MESSAGE "zlib - Win32 DLL Debug" (based on "Win32 (x86) Dynamic-Link Library")
-!MESSAGE "zlib - Win32 LIB ASM Release" (based on "Win32 (x86) Static Library")
-!MESSAGE "zlib - Win32 LIB ASM Debug" (based on "Win32 (x86) Static Library")
-!MESSAGE "zlib - Win32 LIB Release" (based on "Win32 (x86) Static Library")
-!MESSAGE "zlib - Win32 LIB Debug" (based on "Win32 (x86) Static Library")
-!MESSAGE
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-
-!IF  "$(CFG)" == "zlib - Win32 DLL ASM Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "zlib___Win32_DLL_ASM_Release"
-# PROP BASE Intermediate_Dir "zlib___Win32_DLL_ASM_Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Win32_DLL_ASM_Release"
-# PROP Intermediate_Dir "Win32_DLL_ASM_Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-CPP=cl.exe
-# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
-# SUBTRACT BASE CPP /YX /Yc /Yu
-# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /D "ASMV" /D "ASMINF" /FD /c
-# SUBTRACT CPP /YX /Yc /Yu
-MTL=midl.exe
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-RSC=rc.exe
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /machine:I386
-# ADD LINK32 /nologo /dll /machine:I386 /out:"Win32_DLL_ASM_Release\zlib1.dll"
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 DLL ASM Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "zlib___Win32_DLL_ASM_Debug"
-# PROP BASE Intermediate_Dir "zlib___Win32_DLL_ASM_Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Win32_DLL_ASM_Debug"
-# PROP Intermediate_Dir "Win32_DLL_ASM_Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-CPP=cl.exe
-# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
-# SUBTRACT BASE CPP /YX /Yc /Yu
-# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /D "ASMV" /D "ASMINF" /FR /FD /GZ /c
-# SUBTRACT CPP /YX /Yc /Yu
-MTL=midl.exe
-# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-RSC=rc.exe
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 /nologo /dll /debug /machine:I386 /out:"Win32_DLL_ASM_Debug\zlib1d.dll" /pdbtype:sept
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 DLL Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "zlib___Win32_DLL_Release"
-# PROP BASE Intermediate_Dir "zlib___Win32_DLL_Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Win32_DLL_Release"
-# PROP Intermediate_Dir "Win32_DLL_Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-CPP=cl.exe
-# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
-# SUBTRACT BASE CPP /YX /Yc /Yu
-# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
-# SUBTRACT CPP /YX /Yc /Yu
-MTL=midl.exe
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-RSC=rc.exe
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /machine:I386
-# ADD LINK32 /nologo /dll /machine:I386 /out:"Win32_DLL_Release\zlib1.dll"
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 DLL Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "zlib___Win32_DLL_Debug"
-# PROP BASE Intermediate_Dir "zlib___Win32_DLL_Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Win32_DLL_Debug"
-# PROP Intermediate_Dir "Win32_DLL_Debug"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-CPP=cl.exe
-# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
-# SUBTRACT BASE CPP /YX /Yc /Yu
-# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
-# SUBTRACT CPP /YX /Yc /Yu
-MTL=midl.exe
-# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-RSC=rc.exe
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /debug /machine:I386 /pdbtype:sept
-# ADD LINK32 /nologo /dll /debug /machine:I386 /out:"Win32_DLL_Debug\zlib1d.dll" /pdbtype:sept
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 LIB ASM Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "zlib___Win32_LIB_ASM_Release"
-# PROP BASE Intermediate_Dir "zlib___Win32_LIB_ASM_Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Win32_LIB_ASM_Release"
-# PROP Intermediate_Dir "Win32_LIB_ASM_Release"
-# PROP Target_Dir ""
-CPP=cl.exe
-# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
-# SUBTRACT BASE CPP /YX /Yc /Yu
-# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /D "ASMV" /D "ASMINF" /FD /c
-# SUBTRACT CPP /YX /Yc /Yu
-RSC=rc.exe
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LIB32=link.exe -lib
-# ADD BASE LIB32 /nologo
-# ADD LIB32 /nologo
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 LIB ASM Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "zlib___Win32_LIB_ASM_Debug"
-# PROP BASE Intermediate_Dir "zlib___Win32_LIB_ASM_Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Win32_LIB_ASM_Debug"
-# PROP Intermediate_Dir "Win32_LIB_ASM_Debug"
-# PROP Target_Dir ""
-CPP=cl.exe
-# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
-# SUBTRACT BASE CPP /YX /Yc /Yu
-# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /D "ASMV" /D "ASMINF" /FR /FD /GZ /c
-# SUBTRACT CPP /YX /Yc /Yu
-RSC=rc.exe
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LIB32=link.exe -lib
-# ADD BASE LIB32 /nologo
-# ADD LIB32 /nologo /out:"Win32_LIB_ASM_Debug\zlibd.lib"
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 LIB Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "zlib___Win32_LIB_Release"
-# PROP BASE Intermediate_Dir "zlib___Win32_LIB_Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "Win32_LIB_Release"
-# PROP Intermediate_Dir "Win32_LIB_Release"
-# PROP Target_Dir ""
-CPP=cl.exe
-# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
-# SUBTRACT BASE CPP /YX /Yc /Yu
-# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
-# SUBTRACT CPP /YX /Yc /Yu
-RSC=rc.exe
-# ADD BASE RSC /l 0x409 /d "NDEBUG"
-# ADD RSC /l 0x409 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LIB32=link.exe -lib
-# ADD BASE LIB32 /nologo
-# ADD LIB32 /nologo
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 LIB Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "zlib___Win32_LIB_Debug"
-# PROP BASE Intermediate_Dir "zlib___Win32_LIB_Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "Win32_LIB_Debug"
-# PROP Intermediate_Dir "Win32_LIB_Debug"
-# PROP Target_Dir ""
-CPP=cl.exe
-# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
-# SUBTRACT BASE CPP /YX /Yc /Yu
-# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
-# SUBTRACT CPP /YX /Yc /Yu
-RSC=rc.exe
-# ADD BASE RSC /l 0x409 /d "_DEBUG"
-# ADD RSC /l 0x409 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LIB32=link.exe -lib
-# ADD BASE LIB32 /nologo
-# ADD LIB32 /nologo /out:"Win32_LIB_Debug\zlibd.lib"
-
-!ENDIF
-
-# Begin Target
-
-# Name "zlib - Win32 DLL ASM Release"
-# Name "zlib - Win32 DLL ASM Debug"
-# Name "zlib - Win32 DLL Release"
-# Name "zlib - Win32 DLL Debug"
-# Name "zlib - Win32 LIB ASM Release"
-# Name "zlib - Win32 LIB ASM Debug"
-# Name "zlib - Win32 LIB Release"
-# Name "zlib - Win32 LIB Debug"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE=..\..\adler32.c
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\compress.c
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\crc32.c
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\deflate.c
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\gzclose.c
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\gzlib.c
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\gzread.c
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\gzwrite.c
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\infback.c
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\inffast.c
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\inflate.c
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\inftrees.c
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\trees.c
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\uncompr.c
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\win32\zlib.def
-
-!IF  "$(CFG)" == "zlib - Win32 DLL ASM Release"
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 DLL ASM Debug"
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 DLL Release"
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 DLL Debug"
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 LIB ASM Release"
-
-# PROP Exclude_From_Build 1
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 LIB ASM Debug"
-
-# PROP Exclude_From_Build 1
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 LIB Release"
-
-# PROP Exclude_From_Build 1
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 LIB Debug"
-
-# PROP Exclude_From_Build 1
-
-!ENDIF
-
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\zutil.c
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# Begin Source File
-
-SOURCE=..\..\crc32.h
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\deflate.h
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\inffast.h
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\inffixed.h
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\inflate.h
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\inftrees.h
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\trees.h
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\zconf.h
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\zlib.h
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\zutil.h
-# End Source File
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
-# Begin Source File
-
-SOURCE=..\..\win32\zlib1.rc
-# End Source File
-# End Group
-# Begin Group "Assembler Files (Unsupported)"
-
-# PROP Default_Filter "asm;obj;c;cpp;cxx;h;hpp;hxx"
-# Begin Source File
-
-SOURCE=..\..\contrib\masmx86\gvmat32.asm
-
-!IF  "$(CFG)" == "zlib - Win32 DLL ASM Release"
-
-# Begin Custom Build - Assembling...
-IntDir=.\Win32_DLL_ASM_Release
-InputPath=..\..\contrib\masmx86\gvmat32.asm
-InputName=gvmat32
-
-"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	ml.exe /nologo /c /coff /Cx /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)"
-
-# End Custom Build
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 DLL ASM Debug"
-
-# Begin Custom Build - Assembling...
-IntDir=.\Win32_DLL_ASM_Debug
-InputPath=..\..\contrib\masmx86\gvmat32.asm
-InputName=gvmat32
-
-"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	ml.exe /nologo /c /coff /Cx /Zi /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)"
-
-# End Custom Build
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 DLL Release"
-
-# PROP Exclude_From_Build 1
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 DLL Debug"
-
-# PROP Exclude_From_Build 1
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 LIB ASM Release"
-
-# Begin Custom Build - Assembling...
-IntDir=.\Win32_LIB_ASM_Release
-InputPath=..\..\contrib\masmx86\gvmat32.asm
-InputName=gvmat32
-
-"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	ml.exe /nologo /c /coff /Cx /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)"
-
-# End Custom Build
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 LIB ASM Debug"
-
-# Begin Custom Build - Assembling...
-IntDir=.\Win32_LIB_ASM_Debug
-InputPath=..\..\contrib\masmx86\gvmat32.asm
-InputName=gvmat32
-
-"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	ml.exe /nologo /c /coff /Cx /Zi /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)"
-
-# End Custom Build
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 LIB Release"
-
-# PROP Exclude_From_Build 1
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 LIB Debug"
-
-# PROP Exclude_From_Build 1
-
-!ENDIF
-
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\contrib\masmx86\gvmat32c.c
-
-!IF  "$(CFG)" == "zlib - Win32 DLL ASM Release"
-
-# ADD CPP /I "..\.."
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 DLL ASM Debug"
-
-# ADD CPP /I "..\.."
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 DLL Release"
-
-# PROP Exclude_From_Build 1
-# ADD CPP /I "..\.."
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 DLL Debug"
-
-# PROP Exclude_From_Build 1
-# ADD CPP /I "..\.."
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 LIB ASM Release"
-
-# ADD CPP /I "..\.."
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 LIB ASM Debug"
-
-# ADD CPP /I "..\.."
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 LIB Release"
-
-# PROP Exclude_From_Build 1
-# ADD CPP /I "..\.."
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 LIB Debug"
-
-# PROP Exclude_From_Build 1
-# ADD CPP /I "..\.."
-
-!ENDIF
-
-# End Source File
-# Begin Source File
-
-SOURCE=..\..\contrib\masmx86\inffas32.asm
-
-!IF  "$(CFG)" == "zlib - Win32 DLL ASM Release"
-
-# Begin Custom Build - Assembling...
-IntDir=.\Win32_DLL_ASM_Release
-InputPath=..\..\contrib\masmx86\inffas32.asm
-InputName=inffas32
-
-"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	ml.exe /nologo /c /coff /Cx /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)"
-
-# End Custom Build
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 DLL ASM Debug"
-
-# Begin Custom Build - Assembling...
-IntDir=.\Win32_DLL_ASM_Debug
-InputPath=..\..\contrib\masmx86\inffas32.asm
-InputName=inffas32
-
-"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	ml.exe /nologo /c /coff /Cx /Zi /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)"
-
-# End Custom Build
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 DLL Release"
-
-# PROP Exclude_From_Build 1
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 DLL Debug"
-
-# PROP Exclude_From_Build 1
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 LIB ASM Release"
-
-# Begin Custom Build - Assembling...
-IntDir=.\Win32_LIB_ASM_Release
-InputPath=..\..\contrib\masmx86\inffas32.asm
-InputName=inffas32
-
-"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	ml.exe /nologo /c /coff /Cx /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)"
-
-# End Custom Build
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 LIB ASM Debug"
-
-# Begin Custom Build - Assembling...
-IntDir=.\Win32_LIB_ASM_Debug
-InputPath=..\..\contrib\masmx86\inffas32.asm
-InputName=inffas32
-
-"$(IntDir)\$(InputName).obj" : $(SOURCE) "$(INTDIR)" "$(OUTDIR)"
-	ml.exe /nologo /c /coff /Cx /Zi /Fo"$(IntDir)\$(InputName).obj" "$(InputPath)"
-
-# End Custom Build
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 LIB Release"
-
-# PROP Exclude_From_Build 1
-
-!ELSEIF  "$(CFG)" == "zlib - Win32 LIB Debug"
-
-# PROP Exclude_From_Build 1
-
-!ENDIF
-
-# End Source File
-# End Group
-# Begin Source File
-
-SOURCE=.\README.txt
-# End Source File
-# End Target
-# End Project

old/visualc6/zlib.dsw

@@ -1,59 +0,0 @@
-Microsoft Developer Studio Workspace File, Format Version 6.00
-# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
-
-###############################################################################
-
-Project: "example"=.\example.dsp - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-    Begin Project Dependency
-    Project_Dep_Name zlib
-    End Project Dependency
-}}}
-
-###############################################################################
-
-Project: "minigzip"=.\minigzip.dsp - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-    Begin Project Dependency
-    Project_Dep_Name zlib
-    End Project Dependency
-}}}
-
-###############################################################################
-
-Project: "zlib"=.\zlib.dsp - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Global:
-
-Package=<5>
-{{{
-}}}
-
-Package=<3>
-{{{
-}}}
-
-###############################################################################
-

qnx/package.qpg

@@ -25,10 +25,10 @@
       <QPG:Files>
          <QPG:Add file="../zconf.h" install="/opt/include/" user="root:sys" permission="644"/>
          <QPG:Add file="../zlib.h" install="/opt/include/" user="root:sys" permission="644"/>
-         <QPG:Add file="../libz.so.1.2.5.2" install="/opt/lib/" user="root:bin" permission="644"/>
+         <QPG:Add file="../libz.so.1.2.7" install="/opt/lib/" user="root:bin" permission="644"/>
-         <QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.5.2"/>
+         <QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.7"/>
-         <QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.5.2"/>
+         <QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.7"/>
-         <QPG:Add file="../libz.so.1.2.5.2" install="/opt/lib/" component="slib"/>
+         <QPG:Add file="../libz.so.1.2.7" install="/opt/lib/" component="slib"/>
       </QPG:Files>
 
       <QPG:PackageFilter>
@@ -63,7 +63,7 @@
             </QPM:ProductDescription>
 
             <QPM:ReleaseDescription>
-               <QPM:ReleaseVersion>1.2.5.2</QPM:ReleaseVersion>
+               <QPM:ReleaseVersion>1.2.7</QPM:ReleaseVersion>
                <QPM:ReleaseUrgency>Medium</QPM:ReleaseUrgency>
                <QPM:ReleaseStability>Stable</QPM:ReleaseStability>
                <QPM:ReleaseNoteMinor></QPM:ReleaseNoteMinor>

test/minigzip.c

@@ -197,7 +197,7 @@ gzFile gz_open(path, fd, mode)
     gzFile gz;
     int ret;
 
-    gz = malloc(sizeof(gzFile));
+    gz = malloc(sizeof(struct gzFile_s));
     if (gz == NULL)
         return NULL;
     gz->write = strchr(mode, 'w') != NULL;

treebuild.xml

@@ -1,6 +1,6 @@
 <?xml version="1.0" ?>
-<package name="zlib" version="1.2.5.2">
+<package name="zlib" version="1.2.7">
-    <library name="zlib" dlversion="1.2.5.2" dlname="z">
+    <library name="zlib" dlversion="1.2.7" dlname="z">
 	<property name="description"> zip compression library </property>
 	<property name="include-target-dir" value="$(@PACKAGE/install-includedir)" />
 

trees.c

@@ -1,5 +1,5 @@
 /* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995-2010 Jean-loup Gailly
+ * Copyright (C) 1995-2012 Jean-loup Gailly
  * detect_data_type() function provided freely by Cosmin Truta, 2006
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
@@ -74,11 +74,6 @@ local const uch bl_order[BL_CODES]
  * probability, to avoid transmitting the lengths for unused bit length codes.
  */
 
-#define Buf_size (8 * 2*sizeof(char))
-/* Number of bits used within bi_buf. (bi_buf might be implemented on
- * more than 16 bits on some systems.)
- */
-
 /* ===========================================================================
  * Local data. These are initialized only once.
  */
@@ -399,7 +394,6 @@ void ZLIB_INTERNAL _tr_init(s)
 
     s->bi_buf = 0;
     s->bi_valid = 0;
-    s->last_eob_len = 8; /* enough lookahead for inflate */
 #ifdef DEBUG
     s->compressed_len = 0L;
     s->bits_sent = 0L;
@@ -882,16 +876,18 @@ void ZLIB_INTERNAL _tr_stored_block(s, buf, stored_len, last)
     copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
 }
 
+/* ===========================================================================
+ * Flush the bits in the bit buffer to pending output (leaves at most 7 bits)
+ */
+void ZLIB_INTERNAL _tr_flush_bits(s)
+    deflate_state *s;
+{
+    bi_flush(s);
+}
+
 /* ===========================================================================
  * Send one empty static block to give enough lookahead for inflate.
  * This takes 10 bits, of which 7 may remain in the bit buffer.
- * The current inflate code requires 9 bits of lookahead. If the
- * last two codes for the previous block (real code plus EOB) were coded
- * on 5 bits or less, inflate may have only 5+3 bits of lookahead to decode
- * the last real code. In this case we send two empty static blocks instead
- * of one. (There are no problems if the previous block is stored or fixed.)
- * To simplify the code, we assume the worst case of last real code encoded
- * on one bit only.
  */
 void ZLIB_INTERNAL _tr_align(s)
     deflate_state *s;
@@ -902,20 +898,6 @@ void ZLIB_INTERNAL _tr_align(s)
     s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
 #endif
     bi_flush(s);
-    /* Of the 10 bits for the empty block, we have already sent
-     * (10 - bi_valid) bits. The lookahead for the last real code (before
-     * the EOB of the previous block) was thus at least one plus the length
-     * of the EOB plus what we have just sent of the empty static block.
-     */
-    if (1 + s->last_eob_len + 10 - s->bi_valid < 9) {
-        send_bits(s, STATIC_TREES<<1, 3);
-        send_code(s, END_BLOCK, static_ltree);
-#ifdef DEBUG
-        s->compressed_len += 10L;
-#endif
-        bi_flush(s);
-    }
-    s->last_eob_len = 7;
 }
 
 /* ===========================================================================
@@ -1118,7 +1100,6 @@ local void compress_block(s, ltree, dtree)
     } while (lx < s->last_lit);
 
     send_code(s, END_BLOCK, ltree);
-    s->last_eob_len = ltree[END_BLOCK].Len;
 }
 
 /* ===========================================================================
@@ -1226,7 +1207,6 @@ local void copy_block(s, buf, len, header)
     int      header;  /* true if block header must be written */
 {
     bi_windup(s);        /* align on byte boundary */
-    s->last_eob_len = 8; /* enough lookahead for inflate */
 
     if (header) {
         put_short(s, (ush)len);

win32/Makefile.gcc

@@ -1,23 +1,29 @@
 # Makefile for zlib, derived from Makefile.dj2.
 # Modified for mingw32 by C. Spieler, 6/16/98.
 # Updated for zlib 1.2.x by Christian Spieler and Cosmin Truta, Mar-2003.
-# Last updated: 1-Aug-2003.
+# Last updated: Mar 2012.
 # Tested under Cygwin and MinGW.
 
 # Copyright (C) 1995-2003 Jean-loup Gailly.
 # For conditions of distribution and use, see copyright notice in zlib.h
 
-# To compile, or to compile and test, type:
+# To compile, or to compile and test, type from the top level zlib directory:
 #
-#   make -fmakefile.gcc;  make test testdll -fmakefile.gcc
+#   make -fwin32/Makefile.gcc;  make test testdll -fwin32/Makefile.gcc
 #
 # To use the asm code, type:
 #   cp contrib/asm?86/match.S ./match.S
-#   make LOC=-DASMV OBJA=match.o -fmakefile.gcc
+#   make LOC=-DASMV OBJA=match.o -fwin32/Makefile.gcc
 #
 # To install libz.a, zconf.h and zlib.h in the system directories, type:
 #
-#   make install -fmakefile.gcc
+#   make install -fwin32/Makefile.gcc
+#
+# BINARY_PATH, INCLUDE_PATH and LIBRARY_PATH must be set.
+#
+# To install the shared lib, append SHARED_MODE=1 to the make command :
+#
+#   make install -fwin32/Makefile.gcc SHARED_MODE=1
 
 # Note:
 # If the platform is *not* MinGW (e.g. it is Cygwin or UWIN),
@@ -38,7 +44,6 @@ SHARED_MODE=0
 PREFIX =
 CC = $(PREFIX)gcc
 CFLAGS = $(LOC) -O3 -Wall
-EXTRA_CFLAGS = -DNO_VIZ
 
 AS = $(CC)
 ASFLAGS = $(LOC) -Wall
@@ -77,7 +82,7 @@ testdll: example_d.exe minigzip_d.exe
 	echo hello world | ./minigzip_d | ./minigzip_d -d
 
 .c.o:
-	$(CC) $(CFLAGS) $(EXTRA_CFLAGS) -c -o $@ $<
+	$(CC) $(CFLAGS) -c -o $@ $<
 
 .S.o:
 	$(AS) $(ASFLAGS) -c -o $@ $<
@@ -108,25 +113,32 @@ minigzip_d.exe: minigzip.o $(IMPLIB)
 	$(LD) $(LDFLAGS) -o $@ minigzip.o $(IMPLIB)
 	$(STRIP) $@
 
+example.o: test/example.c zlib.h zconf.h
+	$(CC) $(CFLAGS) -I. -c -o $@ test/example.c
+
+minigzip.o: test/minigzip.c zlib.h zconf.h
+	$(CC) $(CFLAGS) -I. -c -o $@ test/minigzip.c
+
 zlibrc.o: win32/zlib1.rc
 	$(RC) $(RCFLAGS) -o $@ win32/zlib1.rc
 
-
-# BINARY_PATH, INCLUDE_PATH and LIBRARY_PATH must be set.
-
 .PHONY: install uninstall clean
 
 install: zlib.h zconf.h $(STATICLIB) $(IMPLIB)
-	-@mkdir -p $(INCLUDE_PATH)
+	@if test -z "$(DESTDIR)$(INCLUDE_PATH)" -o -z "$(DESTDIR)$(LIBRARY_PATH)" -o -z "$(DESTDIR)$(BINARY_PATH)"; then \
-	-@mkdir -p $(LIBRARY_PATH) $(LIBRARY_PATH)/pkgconfig
+		echo INCLUDE_PATH, LIBRARY_PATH, and BINARY_PATH must be specified; \
-	-if [ "$(SHARED_MODE)" = "1" ]; then \
+		exit 1; \
-		mkdir -p $(BINARY_PATH); \
-		$(INSTALL) $(SHAREDLIB) $(BINARY_PATH); \
-		$(INSTALL) $(IMPLIB) $(LIBRARY_PATH); \
 	fi
-	-$(INSTALL) zlib.h $(INCLUDE_PATH)
+	-@mkdir -p '$(DESTDIR)$(INCLUDE_PATH)'
-	-$(INSTALL) zconf.h $(INCLUDE_PATH)
+	-@mkdir -p '$(DESTDIR)$(LIBRARY_PATH)' '$(DESTDIR)$(LIBRARY_PATH)'/pkgconfig
-	-$(INSTALL) $(STATICLIB) $(LIBRARY_PATH)
+	-if [ "$(SHARED_MODE)" = "1" ]; then \
+		mkdir -p '$(DESTDIR)$(BINARY_PATH)'; \
+		$(INSTALL) $(SHAREDLIB) '$(DESTDIR)$(BINARY_PATH)'; \
+		$(INSTALL) $(IMPLIB) '$(DESTDIR)$(LIBRARY_PATH)'; \
+	fi
+	-$(INSTALL) zlib.h '$(DESTDIR)$(INCLUDE_PATH)'
+	-$(INSTALL) zconf.h '$(DESTDIR)$(INCLUDE_PATH)'
+	-$(INSTALL) $(STATICLIB) '$(DESTDIR)$(LIBRARY_PATH)'
 	sed \
 		-e 's|@prefix@|${prefix}|g' \
 		-e 's|@exec_prefix@|${exec_prefix}|g' \
@@ -134,16 +146,16 @@ install: zlib.h zconf.h $(STATICLIB) $(IMPLIB)
 		-e 's|@sharedlibdir@|$(LIBRARY_PATH)|g' \
 		-e 's|@includedir@|$(INCLUDE_PATH)|g' \
 		-e 's|@VERSION@|'`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' zlib.h`'|g' \
-		zlib.pc.in > $(LIBRARY_PATH)/pkgconfig/zlib.pc
+		zlib.pc.in > '$(DESTDIR)$(LIBRARY_PATH)'/pkgconfig/zlib.pc
 
 uninstall:
 	-if [ "$(SHARED_MODE)" = "1" ]; then \
-		$(RM) $(BINARY_PATH)/$(SHAREDLIB); \
+		$(RM) '$(DESTDIR)$(BINARY_PATH)'/$(SHAREDLIB); \
-		$(RM) $(LIBRARY_PATH)/$(IMPLIB); \
+		$(RM) '$(DESTDIR)$(LIBRARY_PATH)'/$(IMPLIB); \
 	fi
-	-$(RM) $(INCLUDE_PATH)/zlib.h
+	-$(RM) '$(DESTDIR)$(INCLUDE_PATH)'/zlib.h
-	-$(RM) $(INCLUDE_PATH)/zconf.h
+	-$(RM) '$(DESTDIR)$(INCLUDE_PATH)'/zconf.h
-	-$(RM) $(LIBRARY_PATH)/$(STATICLIB)
+	-$(RM) '$(DESTDIR)$(LIBRARY_PATH)'/$(STATICLIB)
 
 clean:
 	-$(RM) $(STATICLIB)
@@ -157,7 +169,6 @@ adler32.o: zlib.h zconf.h
 compress.o: zlib.h zconf.h
 crc32.o: crc32.h zlib.h zconf.h
 deflate.o: deflate.h zutil.h zlib.h zconf.h
-example.o: zlib.h zconf.h
 gzclose.o: zlib.h zconf.h gzguts.h
 gzlib.o: zlib.h zconf.h gzguts.h
 gzread.o: zlib.h zconf.h gzguts.h
@@ -166,7 +177,6 @@ inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
 inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
 infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
 inftrees.o: zutil.h zlib.h zconf.h inftrees.h
-minigzip.o: zlib.h zconf.h
 trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
 uncompr.o: zlib.h zconf.h
 zutil.o: zutil.h zlib.h zconf.h

win32/Makefile.msc

@@ -6,8 +6,8 @@
 #   nmake -f win32/Makefile.msc LOC=-DFOO                (nonstandard build)
 #   nmake -f win32/Makefile.msc LOC="-DASMV -DASMINF" \
 #         OBJA="inffas32.obj match686.obj"               (use ASM code, x86)
-#   nmake -f win32/Makefile.msc AS=ml64 LOC="-DASMV -DASMINF" \
+#   nmake -f win32/Makefile.msc AS=ml64 LOC="-DASMV -DASMINF -I." \
-#         OBJA="inffasx64.obj gvmat64.obj inffas8664.c"  (use ASM code, x64)
+#         OBJA="inffasx64.obj gvmat64.obj inffas8664.obj"  (use ASM code, x64)
 
 # optional build flags
 LOC =
@@ -72,6 +72,9 @@ minigzip_d.exe: minigzip.obj $(IMPLIB)
 .c.obj:
 	$(CC) -c $(WFLAGS) $(CFLAGS) $<
 
+{test}.c.obj:
+	$(CC) -c -I. $(WFLAGS) $(CFLAGS) $<
+
 {contrib/masmx64}.c.obj:
 	$(CC) -c $(WFLAGS) $(CFLAGS) $<
 

win32/README-WIN32.txt

@@ -1,6 +1,6 @@
 ZLIB DATA COMPRESSION LIBRARY
 
-zlib 1.2.4 is a general purpose data compression library.  All the code is
+zlib 1.2.7 is a general purpose data compression library.  All the code is
 thread safe.  The data format used by the zlib library is described by RFCs
 (Request for Comments) 1950 to 1952 in the files
 http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
@@ -22,7 +22,7 @@ before asking for help.
 
 Manifest:
 
-The package zlib-1.2.4-win32-x86.zip contains the following files:
+The package zlib-1.2.7-win32-x86.zip will contain the following files:
 
   README-WIN32.txt This document
   ChangeLog        Changes since previous zlib packages
@@ -58,7 +58,7 @@ The package zlib-1.2.4-win32-x86.zip contains the following files:
 
 All .pdb files above are entirely optional, but are very useful to a developer
 attempting to diagnose program misbehavior or a crash.  Many additional
-important files for developers can be found in the zlib124.zip source package
+important files for developers can be found in the zlib127.zip source package
 available from http://zlib.net/ - review that package's README file for details.
 
 
@@ -72,7 +72,7 @@ are too numerous to cite here.
 
 Copyright notice:
 
-  (C) 1995-2010 Jean-loup Gailly and Mark Adler
+  (C) 1995-2012 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages

win32/zlib.def

@@ -42,6 +42,7 @@ EXPORTS
     gzputs
     gzgets
     gzputc
+    gzgetc
     gzungetc
     gzflush
     gzseek
@@ -73,11 +74,11 @@ EXPORTS
     inflateInit_
     inflateInit2_
     inflateBackInit_
+    gzgetc_
     zError
     inflateSyncPoint
     get_crc_table
     inflateUndermine
     inflateResetKeep
     deflateResetKeep
-    gzgetc_
+    gzopen_w
-    gzflags

zconf.h

@@ -1,5 +1,5 @@
 /* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2011 Jean-loup Gailly.
+ * Copyright (C) 1995-2012 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -65,7 +65,6 @@
 #    define gzdopen               z_gzdopen
 #    define gzeof                 z_gzeof
 #    define gzerror               z_gzerror
-#    define gzflags               z_gzflags
 #    define gzflush               z_gzflush
 #    define gzgetc                z_gzgetc
 #    define gzgetc_               z_gzgetc_
@@ -74,6 +73,9 @@
 #    define gzoffset64            z_gzoffset64
 #    define gzopen                z_gzopen
 #    define gzopen64              z_gzopen64
+#    ifdef _WIN32
+#      define gzopen_w              z_gzopen_w
+#    endif
 #    define gzprintf              z_gzprintf
 #    define gzputc                z_gzputc
 #    define gzputs                z_gzputs
@@ -127,9 +129,9 @@
 #  define free_func             z_free_func
 #  ifndef Z_SOLO
 #    define gzFile                z_gzFile
-#    define gz_header             z_gz_header
-#    define gz_headerp            z_gz_headerp
 #  endif
+#  define gz_header             z_gz_header
+#  define gz_headerp            z_gz_headerp
 #  define in_func               z_in_func
 #  define intf                  z_intf
 #  define out_func              z_out_func
@@ -142,9 +144,7 @@
 #  define voidpf                z_voidpf
 
 /* all zlib structs in zlib.h and zconf.h */
-#  ifndef Z_SOLO
+#  define gz_header_s           z_gz_header_s
-#    define gz_header_s           z_gz_header_s
-#  endif
 #  define internal_state        z_internal_state
 
 #endif
@@ -388,6 +388,29 @@ typedef uLong FAR uLongf;
    typedef Byte       *voidp;
 #endif
 
+/* ./configure may #define Z_U4 here */
+
+#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC)
+#  include <limits.h>
+#  if (UINT_MAX == 0xffffffffUL)
+#    define Z_U4 unsigned
+#  else
+#    if (ULONG_MAX == 0xffffffffUL)
+#      define Z_U4 unsigned long
+#    else
+#      if (USHRT_MAX == 0xffffffffUL)
+#        define Z_U4 unsigned short
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef Z_U4
+   typedef Z_U4 z_crc_t;
+#else
+   typedef unsigned long z_crc_t;
+#endif
+
 #ifdef HAVE_UNISTD_H    /* may be set to #if 1 by ./configure */
 #  define Z_HAVE_UNISTD_H
 #endif
@@ -402,28 +425,45 @@ typedef uLong FAR uLongf;
 #  endif
 #endif
 
+#ifdef _WIN32
+#  include <stddef.h>           /* for wchar_t */
+#endif
+
 /* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
  * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
  * though the former does not conform to the LFS document), but considering
  * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
  * equivalently requesting no 64-bit operations
  */
-#if -_LARGEFILE64_SOURCE - -1 == 1
+#if defined(LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
 #  undef _LARGEFILE64_SOURCE
 #endif
 
-#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H)
-#  define Z_LARGE
+#  define Z_HAVE_UNISTD_H
+#endif
+#ifndef Z_SOLO
+#  if defined(Z_HAVE_UNISTD_H) || defined(LARGEFILE64_SOURCE)
+#    include <unistd.h>         /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
+#    ifdef VMS
+#      include <unixio.h>       /* for off_t */
+#    endif
+#    ifndef z_off_t
+#      define z_off_t off_t
+#    endif
+#  endif
 #endif
 
-#if (defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)) && !defined(Z_SOLO)
+#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
-#  include <unistd.h>       /* for SEEK_* and off_t */
+#  define Z_LFS64
-#  ifdef VMS
+#endif
-#    include <unixio.h>     /* for off_t */
+
-#  endif
+#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
-#  ifndef z_off_t
+#  define Z_LARGE64
-#    define z_off_t off_t
+#endif
-#  endif
+
+#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
+#  define Z_WANT64
 #endif
 
 #if !defined(SEEK_SET) && !defined(Z_SOLO)
@@ -436,14 +476,14 @@ typedef uLong FAR uLongf;
 #  define z_off_t long
 #endif
 
-#if !defined(_WIN32) && (defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0)
+#if !defined(_WIN32) && defined(Z_LARGE64)
 #  define z_off64_t off64_t
 #else
-#  if defined(_WIN32)
+#  if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
 #    define z_off64_t __int64
 #  else
-#  define z_off64_t z_off_t
+#    define z_off64_t z_off_t
-#endif
+#  endif
 #endif
 
 /* MVS linker does not support external names larger than 8 bytes */

zconf.h.cmakein

@@ -1,5 +1,5 @@
 /* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2011 Jean-loup Gailly.
+ * Copyright (C) 1995-2012 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -67,7 +67,6 @@
 #    define gzdopen               z_gzdopen
 #    define gzeof                 z_gzeof
 #    define gzerror               z_gzerror
-#    define gzflags               z_gzflags
 #    define gzflush               z_gzflush
 #    define gzgetc                z_gzgetc
 #    define gzgetc_               z_gzgetc_
@@ -76,6 +75,9 @@
 #    define gzoffset64            z_gzoffset64
 #    define gzopen                z_gzopen
 #    define gzopen64              z_gzopen64
+#    ifdef _WIN32
+#      define gzopen_w              z_gzopen_w
+#    endif
 #    define gzprintf              z_gzprintf
 #    define gzputc                z_gzputc
 #    define gzputs                z_gzputs
@@ -129,9 +131,9 @@
 #  define free_func             z_free_func
 #  ifndef Z_SOLO
 #    define gzFile                z_gzFile
-#    define gz_header             z_gz_header
-#    define gz_headerp            z_gz_headerp
 #  endif
+#  define gz_header             z_gz_header
+#  define gz_headerp            z_gz_headerp
 #  define in_func               z_in_func
 #  define intf                  z_intf
 #  define out_func              z_out_func
@@ -144,9 +146,7 @@
 #  define voidpf                z_voidpf
 
 /* all zlib structs in zlib.h and zconf.h */
-#  ifndef Z_SOLO
+#  define gz_header_s           z_gz_header_s
-#    define gz_header_s           z_gz_header_s
-#  endif
 #  define internal_state        z_internal_state
 
 #endif
@@ -390,6 +390,29 @@ typedef uLong FAR uLongf;
    typedef Byte       *voidp;
 #endif
 
+/* ./configure may #define Z_U4 here */
+
+#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC)
+#  include <limits.h>
+#  if (UINT_MAX == 0xffffffffUL)
+#    define Z_U4 unsigned
+#  else
+#    if (ULONG_MAX == 0xffffffffUL)
+#      define Z_U4 unsigned long
+#    else
+#      if (USHRT_MAX == 0xffffffffUL)
+#        define Z_U4 unsigned short
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef Z_U4
+   typedef Z_U4 z_crc_t;
+#else
+   typedef unsigned long z_crc_t;
+#endif
+
 #ifdef HAVE_UNISTD_H    /* may be set to #if 1 by ./configure */
 #  define Z_HAVE_UNISTD_H
 #endif
@@ -404,28 +427,45 @@ typedef uLong FAR uLongf;
 #  endif
 #endif
 
+#ifdef _WIN32
+#  include <stddef.h>           /* for wchar_t */
+#endif
+
 /* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
  * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
  * though the former does not conform to the LFS document), but considering
  * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
  * equivalently requesting no 64-bit operations
  */
-#if -_LARGEFILE64_SOURCE - -1 == 1
+#if defined(LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
 #  undef _LARGEFILE64_SOURCE
 #endif
 
-#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H)
-#  define Z_LARGE
+#  define Z_HAVE_UNISTD_H
+#endif
+#ifndef Z_SOLO
+#  if defined(Z_HAVE_UNISTD_H) || defined(LARGEFILE64_SOURCE)
+#    include <unistd.h>         /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
+#    ifdef VMS
+#      include <unixio.h>       /* for off_t */
+#    endif
+#    ifndef z_off_t
+#      define z_off_t off_t
+#    endif
+#  endif
 #endif
 
-#if (defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)) && !defined(Z_SOLO)
+#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
-#  include <unistd.h>       /* for SEEK_* and off_t */
+#  define Z_LFS64
-#  ifdef VMS
+#endif
-#    include <unixio.h>     /* for off_t */
+
-#  endif
+#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
-#  ifndef z_off_t
+#  define Z_LARGE64
-#    define z_off_t off_t
+#endif
-#  endif
+
+#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
+#  define Z_WANT64
 #endif
 
 #if !defined(SEEK_SET) && !defined(Z_SOLO)
@@ -438,14 +478,14 @@ typedef uLong FAR uLongf;
 #  define z_off_t long
 #endif
 
-#if !defined(_WIN32) && (defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0)
+#if !defined(_WIN32) && defined(Z_LARGE64)
 #  define z_off64_t off64_t
 #else
-#  if defined(_WIN32)
+#  if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
 #    define z_off64_t __int64
 #  else
-#  define z_off64_t z_off_t
+#    define z_off64_t z_off_t
-#endif
+#  endif
 #endif
 
 /* MVS linker does not support external names larger than 8 bytes */

zconf.h.in

@@ -1,5 +1,5 @@
 /* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2011 Jean-loup Gailly.
+ * Copyright (C) 1995-2012 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -65,7 +65,6 @@
 #    define gzdopen               z_gzdopen
 #    define gzeof                 z_gzeof
 #    define gzerror               z_gzerror
-#    define gzflags               z_gzflags
 #    define gzflush               z_gzflush
 #    define gzgetc                z_gzgetc
 #    define gzgetc_               z_gzgetc_
@@ -74,6 +73,9 @@
 #    define gzoffset64            z_gzoffset64
 #    define gzopen                z_gzopen
 #    define gzopen64              z_gzopen64
+#    ifdef _WIN32
+#      define gzopen_w              z_gzopen_w
+#    endif
 #    define gzprintf              z_gzprintf
 #    define gzputc                z_gzputc
 #    define gzputs                z_gzputs
@@ -127,9 +129,9 @@
 #  define free_func             z_free_func
 #  ifndef Z_SOLO
 #    define gzFile                z_gzFile
-#    define gz_header             z_gz_header
-#    define gz_headerp            z_gz_headerp
 #  endif
+#  define gz_header             z_gz_header
+#  define gz_headerp            z_gz_headerp
 #  define in_func               z_in_func
 #  define intf                  z_intf
 #  define out_func              z_out_func
@@ -142,9 +144,7 @@
 #  define voidpf                z_voidpf
 
 /* all zlib structs in zlib.h and zconf.h */
-#  ifndef Z_SOLO
+#  define gz_header_s           z_gz_header_s
-#    define gz_header_s           z_gz_header_s
-#  endif
 #  define internal_state        z_internal_state
 
 #endif
@@ -388,6 +388,29 @@ typedef uLong FAR uLongf;
    typedef Byte       *voidp;
 #endif
 
+/* ./configure may #define Z_U4 here */
+
+#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC)
+#  include <limits.h>
+#  if (UINT_MAX == 0xffffffffUL)
+#    define Z_U4 unsigned
+#  else
+#    if (ULONG_MAX == 0xffffffffUL)
+#      define Z_U4 unsigned long
+#    else
+#      if (USHRT_MAX == 0xffffffffUL)
+#        define Z_U4 unsigned short
+#      endif
+#    endif
+#  endif
+#endif
+
+#ifdef Z_U4
+   typedef Z_U4 z_crc_t;
+#else
+   typedef unsigned long z_crc_t;
+#endif
+
 #ifdef HAVE_UNISTD_H    /* may be set to #if 1 by ./configure */
 #  define Z_HAVE_UNISTD_H
 #endif
@@ -402,28 +425,45 @@ typedef uLong FAR uLongf;
 #  endif
 #endif
 
+#ifdef _WIN32
+#  include <stddef.h>           /* for wchar_t */
+#endif
+
 /* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
  * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
  * though the former does not conform to the LFS document), but considering
  * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
  * equivalently requesting no 64-bit operations
  */
-#if -_LARGEFILE64_SOURCE - -1 == 1
+#if defined(LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1
 #  undef _LARGEFILE64_SOURCE
 #endif
 
-#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+#if defined(__WATCOMC__) && !defined(Z_HAVE_UNISTD_H)
-#  define Z_LARGE
+#  define Z_HAVE_UNISTD_H
+#endif
+#ifndef Z_SOLO
+#  if defined(Z_HAVE_UNISTD_H) || defined(LARGEFILE64_SOURCE)
+#    include <unistd.h>         /* for SEEK_*, off_t, and _LFS64_LARGEFILE */
+#    ifdef VMS
+#      include <unixio.h>       /* for off_t */
+#    endif
+#    ifndef z_off_t
+#      define z_off_t off_t
+#    endif
+#  endif
 #endif
 
-#if (defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)) && !defined(Z_SOLO)
+#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0
-#  include <unistd.h>       /* for SEEK_* and off_t */
+#  define Z_LFS64
-#  ifdef VMS
+#endif
-#    include <unixio.h>     /* for off_t */
+
-#  endif
+#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64)
-#  ifndef z_off_t
+#  define Z_LARGE64
-#    define z_off_t off_t
+#endif
-#  endif
+
+#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64)
+#  define Z_WANT64
 #endif
 
 #if !defined(SEEK_SET) && !defined(Z_SOLO)
@@ -436,14 +476,14 @@ typedef uLong FAR uLongf;
 #  define z_off_t long
 #endif
 
-#if !defined(_WIN32) && (defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0)
+#if !defined(_WIN32) && defined(Z_LARGE64)
 #  define z_off64_t off64_t
 #else
-#  if defined(_WIN32)
+#  if defined(_WIN32) && !defined(__GNUC__) && !defined(Z_SOLO)
 #    define z_off64_t __int64
 #  else
-#  define z_off64_t z_off_t
+#    define z_off64_t z_off_t
-#endif
+#  endif
 #endif
 
 /* MVS linker does not support external names larger than 8 bytes */

zlib.3

@@ -1,4 +1,4 @@
-.TH ZLIB 3 "17 Dec 2011"
+.TH ZLIB 3 "2 May 2012"
 .SH NAME
 zlib \- compression/decompression library
 .SH SYNOPSIS
@@ -125,8 +125,8 @@ before asking for help.
 Send questions and/or comments to zlib@gzip.org,
 or (for the Windows DLL version) to Gilles Vollant (info@winimage.com).
 .SH AUTHORS
-Version 1.2.5.2
+Version 1.2.7
-Copyright (C) 1995-2011 Jean-loup Gailly (jloup@gzip.org)
+Copyright (C) 1995-2012 Jean-loup Gailly (jloup@gzip.org)
 and Mark Adler (madler@alumni.caltech.edu).
 .LP
 This software is provided "as-is,"

zlib.h

@@ -1,7 +1,7 @@
 /* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.2.5.2, December 17th, 2011
+  version 1.2.7, May 2nd, 2012
 
-  Copyright (C) 1995-2011 Jean-loup Gailly and Mark Adler
+  Copyright (C) 1995-2012 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
@@ -37,12 +37,12 @@
 extern "C" {
 #endif
 
-#define ZLIB_VERSION "1.2.5.2"
+#define ZLIB_VERSION "1.2.7"
-#define ZLIB_VERNUM 0x1252
+#define ZLIB_VERNUM 0x1270
 #define ZLIB_VER_MAJOR 1
 #define ZLIB_VER_MINOR 2
-#define ZLIB_VER_REVISION 5
+#define ZLIB_VER_REVISION 7
-#define ZLIB_VER_SUBREVISION 2
+#define ZLIB_VER_SUBREVISION 0
 
 /*
     The 'zlib' compression library provides in-memory compression and
@@ -452,14 +452,17 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
   error.  However if all decompression is to be performed in a single step (a
   single call of inflate), the parameter flush should be set to Z_FINISH.  In
   this case all pending input is processed and all pending output is flushed;
-  avail_out must be large enough to hold all the uncompressed data.  (The size
+  avail_out must be large enough to hold all of the uncompressed data for the
-  of the uncompressed data may have been saved by the compressor for this
+  operation to complete.  (The size of the uncompressed data may have been
-  purpose.) The next operation on this stream must be inflateEnd to deallocate
+  saved by the compressor for this purpose.) The use of Z_FINISH is not
-  the decompression state.  The use of Z_FINISH is not required to perform an
+  required to perform an inflation in one step.  However it may be used to
-  inflation in one step.  However it may be used to inform inflate that a
+  inform inflate that a faster approach can be used for the single inflate()
-  faster approach can be used for the single inflate() call.  Z_FINISH also
+  call.  Z_FINISH also informs inflate to not maintain a sliding window if the
-  informs inflate to not maintain a sliding window if the stream completes,
+  stream completes, which reduces inflate's memory footprint.  If the stream
-  which reduces inflate's memory footprint.
+  does not complete, either because not all of the stream is provided or not
+  enough output space is provided, then a sliding window will be allocated and
+  inflate() can be called again to continue the operation as if Z_NO_FLUSH had
+  been used.
 
      In this implementation, inflate() always flushes as much output as
   possible to the output buffer, and always uses the faster approach on the
@@ -715,7 +718,8 @@ ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm,
    been generated, but not yet provided in the available output.  The bytes not
    provided would be due to the available output space having being consumed.
    The number of bits of output not provided are between 0 and 7, where they
-   await more bits to join them in order to fill out a full byte.
+   await more bits to join them in order to fill out a full byte.  If pending
+   or bits are Z_NULL, then those values are not set.
 
      deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source
    stream state was inconsistent.
@@ -733,8 +737,9 @@ ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
    than or equal to 16, and that many of the least significant bits of value
    will be inserted in the output.
 
-     deflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+     deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough
-   stream state was inconsistent.
+   room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the
+   source stream state was inconsistent.
 */
 
 ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
@@ -1215,7 +1220,10 @@ ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
 
      "a" can be used instead of "w" to request that the gzip stream that will
    be written be appended to the file.  "+" will result in an error, since
-   reading and writing to the same gzip file is not supported.
+   reading and writing to the same gzip file is not supported.  The addition of
+   "x" when writing will create the file exclusively, which fails if the file
+   already exists.  On systems that support it, the addition of "e" when
+   reading or writing will set the flag to close the file on an execve() call.
 
      These functions, as well as gzip, will read and decode a sequence of gzip
    streams in a file.  The append function of gzopen() can be used to create
@@ -1363,8 +1371,8 @@ ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
    returns the value that was written, or -1 in case of error.
 */
 
-/*
 ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
+/*
      Reads one byte from the compressed file.  gzgetc returns this byte or -1
    in case of end of file or error.  This is implemented as a macro for speed.
    As such, it does not do all of the checking the other functions do.  I.e.
@@ -1576,9 +1584,8 @@ ZEXTERN uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
 /*
      Update a running CRC-32 with the bytes buf[0..len-1] and return the
    updated CRC-32.  If buf is Z_NULL, this function returns the required
-   initial value for the for the crc.  Pre- and post-conditioning (one's
+   initial value for the crc.  Pre- and post-conditioning (one's complement) is
-   complement) is performed within this function so it shouldn't be done by the
+   performed within this function so it shouldn't be done by the application.
-   application.
 
    Usage example:
 
@@ -1648,9 +1655,15 @@ struct gzFile_s {
     unsigned char *next;
     z_off64_t pos;
 };
-ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));
+ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));  /* backward compatibility */
-#define gzgetc(g) \
+#ifdef Z_PREFIX_SET
-    ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc_(g))
+#  undef z_gzgetc
+#  define z_gzgetc(g) \
+          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g))
+#else
+#  define gzgetc(g) \
+          ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc(g))
+#endif
 
 /* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
  * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
@@ -1658,7 +1671,7 @@ ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));
  * functions are changed to 64 bits) -- in case these are set on systems
  * without large file support, _LFS64_LARGEFILE must also be true
  */
-#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+#ifdef Z_LARGE64
    ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
    ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
    ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
@@ -1667,7 +1680,7 @@ ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));
    ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
 #endif
 
-#if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS-0 == 64 && _LFS64_LARGEFILE-0
+#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64)
 #  ifdef Z_PREFIX_SET
 #    define z_gzopen z_gzopen64
 #    define z_gzseek z_gzseek64
@@ -1683,7 +1696,7 @@ ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));
 #    define adler32_combine adler32_combine64
 #    define crc32_combine crc32_combine64
 #  endif
-#  ifndef _LARGEFILE64_SOURCE
+#  ifndef Z_LARGE64
      ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
      ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
      ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
@@ -1715,12 +1728,13 @@ ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));
 /* undocumented functions */
 ZEXTERN const char   * ZEXPORT zError           OF((int));
 ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp));
-ZEXTERN const uLongf * ZEXPORT get_crc_table    OF((void));
+ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table    OF((void));
 ZEXTERN int            ZEXPORT inflateUndermine OF((z_streamp, int));
 ZEXTERN int            ZEXPORT inflateResetKeep OF((z_streamp));
 ZEXTERN int            ZEXPORT deflateResetKeep OF((z_streamp));
-#ifndef Z_SOLO
+#if defined(_WIN32) && !defined(Z_SOLO)
-  ZEXTERN unsigned long  ZEXPORT gzflags          OF((void));
+ZEXTERN gzFile         ZEXPORT gzopen_w OF((const wchar_t *path,
+                                            const char *mode));
 #endif
 
 #ifdef __cplusplus

zlib.map

@@ -72,11 +72,7 @@ ZLIB_1.2.5.1 {
 } ZLIB_1.2.3.5;
 
 ZLIB_1.2.5.2 {
-    gzflags;
+    deflateResetKeep;
     gzgetc_;
     inflateResetKeep;
 } ZLIB_1.2.5.1;
-
-ZLIB_1.2.5.3 {
-    deflateResetKeep;
-} ZLIB_1.2.5.2;

zlib.pc.cmakein

@@ -0,0 +1,13 @@
+prefix=@CMAKE_INSTALL_PREFIX@
+exec_prefix=@CMAKE_INSTALL_PREFIX@
+libdir=@INSTALL_LIB_DIR@
+sharedlibdir=@INSTALL_LIB_DIR@
+includedir=@INSTALL_INC_DIR@
+
+Name: zlib
+Description: zlib compression library
+Version: @VERSION@
+
+Requires:
+Libs: -L${libdir} -L${sharedlibdir} -lz
+Cflags: -I${includedir}

zutil.c

@@ -1,11 +1,14 @@
 /* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-2005, 2010, 2011 Jean-loup Gailly.
+ * Copyright (C) 1995-2005, 2010, 2011, 2012 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
 /* @(#) $Id$ */
 
 #include "zutil.h"
+#ifndef Z_SOLO
+#  include "gzguts.h"
+#endif
 
 #ifndef NO_DUMMY_DECL
 struct internal_state      {int dummy;}; /* for buggy compilers */
@@ -85,11 +88,31 @@ uLong ZEXPORT zlibCompileFlags()
 #ifdef FASTEST
     flags += 1L << 21;
 #endif
-#ifdef Z_SOLO
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
-    return flags;
+#  ifdef NO_vsnprintf
+    flags += 1L << 25;
+#    ifdef HAS_vsprintf_void
+    flags += 1L << 26;
+#    endif
+#  else
+#    ifdef HAS_vsnprintf_void
+    flags += 1L << 26;
+#    endif
+#  endif
 #else
-    return flags + gzflags();
+    flags += 1L << 24;
+#  ifdef NO_snprintf
+    flags += 1L << 25;
+#    ifdef HAS_sprintf_void
+    flags += 1L << 26;
+#    endif
+#  else
+#    ifdef HAS_snprintf_void
+    flags += 1L << 26;
+#    endif
+#  endif
 #endif
+    return flags;
 }
 
 #ifdef DEBUG

zutil.h

@@ -1,5 +1,5 @@
 /* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995-2011 Jean-loup Gailly.
+ * Copyright (C) 1995-2012 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -13,7 +13,7 @@
 #ifndef ZUTIL_H
 #define ZUTIL_H
 
-#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33) && !defined(NO_VIZ)
+#ifdef HAVE_HIDDEN
 #  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
 #else
 #  define ZLIB_INTERNAL
@@ -245,4 +245,8 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 #define ZFREE(strm, addr)  (*((strm)->zfree))((strm)->opaque, (voidpf)(addr))
 #define TRY_FREE(s, p) {if (p) ZFREE(s, p);}
 
+/* Reverse the bytes in a 32-bit value */
+#define ZSWAP32(q) ((((q) >> 24) & 0xff) + (((q) >> 8) & 0xff00) + \
+                    (((q) & 0xff00) << 8) + (((q) & 0xff) << 24))
+
 #endif /* ZUTIL_H */