zlib 1.2.5.2

Also since gzread() will no longer return an error for an incomplete
gzip file, have gzclose() return an error if the last gzread() ended
in the middle of a gzip stream.

.gitignore

@@ -0,0 +1,23 @@
+*.diff
+*.patch
+*.orig
+*.rej
+
+*~
+*.a
+*.lo
+*.o
+*.dylib
+
+*.gcda
+*.gcno
+*.gcov
+
+/example
+/example64
+/examplesh
+/libz.so*
+/minigzip
+/minigzip64
+/minigzipsh
+/zlib.pc

CMakeLists.txt

@@ -20,7 +20,7 @@ check_include_file(stddef.h    HAVE_STDDEF_H)
 #
 # Check to see if we have large file support
 #
-set(CMAKE_REQUIRED_DEFINITIONS -D_LARGEFILE64_SOURCE)
+set(CMAKE_REQUIRED_DEFINITIONS -D_LARGEFILE64_SOURCE=1)
 # We add these other definitions here because CheckTypeSize.cmake
 # in CMake 2.4.x does not automatically do so and we want
 # compatibility with CMake 2.4.x.
@@ -35,7 +35,7 @@ if(HAVE_STDDEF_H)
 endif()
 check_type_size(off64_t OFF64_T)
 if(HAVE_OFF64_T)
-   add_definitions(-D_LARGEFILE64_SOURCE)
+   add_definitions(-D_LARGEFILE64_SOURCE=1)
 endif()
 set(CMAKE_REQUIRED_DEFINITIONS) # clear variable
 
@@ -52,13 +52,6 @@ endif()
 #
 check_include_file(unistd.h Z_HAVE_UNISTD_H)
 
-#
-# Check for errno.h
-check_include_file(errno.h HAVE_ERRNO_H)
-if(NOT HAVE_ERRNO_H)
-   add_definitions(-DNO_ERRNO_H)
-endif()
-
 if(MSVC)
     set(CMAKE_DEBUG_POSTFIX "d")
     add_definitions(-D_CRT_SECURE_NO_DEPRECATE)
@@ -128,7 +121,7 @@ string(REGEX REPLACE ".*#define[ \t]+ZLIB_VERSION[ \t]+\"([0-9A-Za-z.]+)\".*"
 if(MINGW)
     # This gets us DLL resource information when compiling on MinGW.
     add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/zlib1rc.obj
-                       COMMAND windres.exe
+                       COMMAND ${CMAKE_RC_COMPILER}
                             -D GCC_WINDRES
                             -I ${CMAKE_CURRENT_SOURCE_DIR}
                             -I ${CMAKE_CURRENT_BINARY_DIR}
@@ -178,20 +171,20 @@ endif()
 # Example binaries
 #============================================================================
 
-add_executable(example example.c)
+add_executable(example test/example.c)
 target_link_libraries(example zlib)
 add_test(example example)
 
-add_executable(minigzip minigzip.c)
+add_executable(minigzip test/minigzip.c)
 target_link_libraries(minigzip zlib)
 
 if(HAVE_OFF64_T)
-    add_executable(example64 example.c)
+    add_executable(example64 test/example.c)
     target_link_libraries(example64 zlib)
     set_target_properties(example64 PROPERTIES COMPILE_FLAGS "-D_FILE_OFFSET_BITS=64")
     add_test(example64 example64)
 
-    add_executable(minigzip64 minigzip.c)
+    add_executable(minigzip64 test/minigzip.c)
     target_link_libraries(minigzip64 zlib)
     set_target_properties(minigzip64 PROPERTIES COMPILE_FLAGS "-D_FILE_OFFSET_BITS=64")
 endif()

ChangeLog

@@ -1,7 +1,182 @@
 
                 ChangeLog file for zlib
 
-Changes in 1.2.4 (13 Mar 2010)
+Changes in 1.2.5.2 (17 Dec 2011)
+- fix ld error: unable to find version dependency 'ZLIB_1.2.5'
+- use relative symlinks for shared libs
+- Avoid searching past window for Z_RLE strategy
+- Assure that high-water mark initialization is always applied in deflate
+- Add assertions to fill_window() in deflate.c to match comments
+- Update python link in README
+- Correct spelling error in gzread.c
+- Fix bug in gzgets() for a concatenated empty gzip stream
+- Correct error in comment for gz_make()
+- Change gzread() and related to ignore junk after gzip streams
+- Allow gzread() and related to continue after gzclearerr()
+- Allow gzrewind() and gzseek() after a premature end-of-file
+- Simplify gzseek() now that raw after gzip is ignored
+- Change gzgetc() to a macro for speed (~40% speedup in testing)
+- Fix gzclose() to return the actual error last encountered
+- Always add large file support for windows
+- Include zconf.h for windows large file support
+- Include zconf.h.cmakein for windows large file support
+- Update zconf.h.cmakein on make distclean
+- Merge vestigial vsnprintf determination from zutil.h to gzguts.h
+- Clarify how gzopen() appends in zlib.h comments
+- Correct documentation of gzdirect() since junk at end now ignored
+- Add a transparent write mode to gzopen() when 'T' is in the mode
+- Update python link in zlib man page
+- Get inffixed.h and MAKEFIXED result to match
+- Add a ./config --solo option to make zlib subset with no libary use
+- Add undocumented inflateResetKeep() function for CAB file decoding
+- Add --cover option to ./configure for gcc coverage testing
+- Add #define ZLIB_CONST option to use const in the z_stream interface
+- Add comment to gzdopen() in zlib.h to use dup() when using fileno()
+- Note behavior of uncompress() to provide as much data as it can
+- Add files in contrib/minizip to aid in building libminizip
+- Split off AR options in Makefile.in and configure
+- Change ON macro to Z_ARG to avoid application conflicts
+- Facilitate compilation with Borland C++ for pragmas and vsnprintf
+- Include io.h for Turbo C / Borland C++
+- Move example.c and minigzip.c to test/
+- Simplify incomplete code table filling in inflate_table()
+- Remove code from inflate.c and infback.c that is impossible to execute
+- Test the inflate code with full coverage
+- Allow deflateSetDictionary, inflateSetDictionary at any time (in raw)
+- Add deflateResetKeep and fix inflateResetKeep to retain dictionary
+- Fix gzwrite.c to accommodate reduced memory zlib compilation
+- Have inflate() with Z_FINISH avoid the allocation of a window
+- Do not set strm->adler when doing raw inflate
+- Fix gzeof() to behave just like feof() when read is not past end of file
+- Fix bug in gzread.c when end-of-file is reached
+- Avoid use of Z_BUF_ERROR in gz* functions except for premature EOF
+- Document gzread() capability to read concurrently written files
+- Remove hard-coding of resource compiler in CMakeLists.txt [Blammo]
+
+Changes in 1.2.5.1 (10 Sep 2011)
+- Update FAQ entry on shared builds (#13)
+- Avoid symbolic argument to chmod in Makefile.in
+- Fix bug and add consts in contrib/puff [Oberhumer]
+- Update contrib/puff/zeros.raw test file to have all block types
+- Add full coverage test for puff in contrib/puff/Makefile
+- Fix static-only-build install in Makefile.in
+- Fix bug in unzGetCurrentFileInfo() in contrib/minizip [Kuno]
+- Add libz.a dependency to shared in Makefile.in for parallel builds
+- Spell out "number" (instead of "nb") in zlib.h for total_in, total_out
+- Replace $(...) with `...` in configure for non-bash sh [Bowler]
+- Add darwin* to Darwin* and solaris* to SunOS\ 5* in configure [Groffen]
+- Add solaris* to Linux* in configure to allow gcc use [Groffen]
+- Add *bsd* to Linux* case in configure [Bar-Lev]
+- Add inffast.obj to dependencies in win32/Makefile.msc
+- Correct spelling error in deflate.h [Kohler]
+- Change libzdll.a again to libz.dll.a (!) in win32/Makefile.gcc
+- Add test to configure for GNU C looking for gcc in output of $cc -v
+- Add zlib.pc generation to win32/Makefile.gcc [Weigelt]
+- Fix bug in zlib.h for _FILE_OFFSET_BITS set and _LARGEFILE64_SOURCE not
+- Add comment in zlib.h that adler32_combine with len2 < 0 makes no sense
+- Make NO_DIVIDE option in adler32.c much faster (thanks to John Reiser)
+- Make stronger test in zconf.h to include unistd.h for LFS
+- Apply Darwin patches for 64-bit file offsets to contrib/minizip [Slack]
+- Fix zlib.h LFS support when Z_PREFIX used
+- Add updated as400 support (removed from old) [Monnerat]
+- Avoid deflate sensitivity to volatile input data
+- Avoid division in adler32_combine for NO_DIVIDE
+- Clarify the use of Z_FINISH with deflateBound() amount of space
+- Set binary for output file in puff.c
+- Use u4 type for crc_table to avoid conversion warnings
+- Apply casts in zlib.h to avoid conversion warnings
+- Add OF to prototypes for adler32_combine_ and crc32_combine_ [Miller]
+- Improve inflateSync() documentation to note indeterminancy
+- Add deflatePending() function to return the amount of pending output
+- Correct the spelling of "specification" in FAQ [Randers-Pehrson]
+- Add a check in configure for stdarg.h, use for gzprintf()
+- Check that pointers fit in ints when gzprint() compiled old style
+- Add dummy name before $(SHAREDLIBV) in Makefile [Bar-Lev, Bowler]
+- Delete line in configure that adds -L. libz.a to LDFLAGS [Weigelt]
+- Add debug records in assmebler code [Londer]
+- Update RFC references to use http://tools.ietf.org/html/... [Li]
+- Add --archs option, use of libtool to configure for Mac OS X [Borstel]
+
+Changes in 1.2.5 (19 Apr 2010)
+- Disable visibility attribute in win32/Makefile.gcc [Bar-Lev]
+- Default to libdir as sharedlibdir in configure [Nieder]
+- Update copyright dates on modified source files
+- Update trees.c to be able to generate modified trees.h
+- Exit configure for MinGW, suggesting win32/Makefile.gcc
+- Check for NULL path in gz_open [Homurlu]
+
+Changes in 1.2.4.5 (18 Apr 2010)
+- Set sharedlibdir in configure [Torok]
+- Set LDFLAGS in Makefile.in [Bar-Lev]
+- Avoid mkdir objs race condition in Makefile.in [Bowler]
+- Add ZLIB_INTERNAL in front of internal inter-module functions and arrays
+- Define ZLIB_INTERNAL to hide internal functions and arrays for GNU C
+- Don't use hidden attribute when it is a warning generator (e.g. Solaris)
+
+Changes in 1.2.4.4 (18 Apr 2010)
+- Fix CROSS_PREFIX executable testing, CHOST extract, mingw* [Torok]
+- Undefine _LARGEFILE64_SOURCE in zconf.h if it is zero, but not if empty
+- Try to use bash or ksh regardless of functionality of /bin/sh
+- Fix configure incompatibility with NetBSD sh
+- Remove attempt to run under bash or ksh since have better NetBSD fix
+- Fix win32/Makefile.gcc for MinGW [Bar-Lev]
+- Add diagnostic messages when using CROSS_PREFIX in configure
+- Added --sharedlibdir option to configure [Weigelt]
+- Use hidden visibility attribute when available [Frysinger]
+
+Changes in 1.2.4.3 (10 Apr 2010)
+- Only use CROSS_PREFIX in configure for ar and ranlib if they exist
+- Use CROSS_PREFIX for nm [Bar-Lev]
+- Assume _LARGEFILE64_SOURCE defined is equivalent to true
+- Avoid use of undefined symbols in #if with && and ||
+- Make *64 prototypes in gzguts.h consistent with functions
+- Add -shared load option for MinGW in configure [Bowler]
+- Move z_off64_t to public interface, use instead of off64_t
+- Remove ! from shell test in configure (not portable to Solaris)
+- Change +0 macro tests to -0 for possibly increased portability
+
+Changes in 1.2.4.2 (9 Apr 2010)
+- Add consistent carriage returns to readme.txt's in masmx86 and masmx64
+- Really provide prototypes for *64 functions when building without LFS
+- Only define unlink() in minigzip.c if unistd.h not included
+- Update README to point to contrib/vstudio project files
+- Move projects/vc6 to old/ and remove projects/
+- Include stdlib.h in minigzip.c for setmode() definition under WinCE
+- Clean up assembler builds in win32/Makefile.msc [Rowe]
+- Include sys/types.h for Microsoft for off_t definition
+- Fix memory leak on error in gz_open()
+- Symbolize nm as $NM in configure [Weigelt]
+- Use TEST_LDSHARED instead of LDSHARED to link test programs [Weigelt]
+- Add +0 to _FILE_OFFSET_BITS and _LFS64_LARGEFILE in case not defined
+- Fix bug in gzeof() to take into account unused input data
+- Avoid initialization of structures with variables in puff.c
+- Updated win32/README-WIN32.txt [Rowe]
+
+Changes in 1.2.4.1 (28 Mar 2010)
+- Remove the use of [a-z] constructs for sed in configure [gentoo 310225]
+- Remove $(SHAREDLIB) from LIBS in Makefile.in [Creech]
+- Restore "for debugging" comment on sprintf() in gzlib.c
+- Remove fdopen for MVS from gzguts.h
+- Put new README-WIN32.txt in win32 [Rowe]
+- Add check for shell to configure and invoke another shell if needed
+- Fix big fat stinking bug in gzseek() on uncompressed files
+- Remove vestigial F_OPEN64 define in zutil.h
+- Set and check the value of _LARGEFILE_SOURCE and _LARGEFILE64_SOURCE
+- Avoid errors on non-LFS systems when applications define LFS macros
+- Set EXE to ".exe" in configure for MINGW [Kahle]
+- Match crc32() in crc32.c exactly to the prototype in zlib.h [Sherrill]
+- Add prefix for cross-compilation in win32/makefile.gcc [Bar-Lev]
+- Add DLL install in win32/makefile.gcc [Bar-Lev]
+- Allow Linux* or linux* from uname in configure [Bar-Lev]
+- Allow ldconfig to be redefined in configure and Makefile.in [Bar-Lev]
+- Add cross-compilation prefixes to configure [Bar-Lev]
+- Match type exactly in gz_load() invocation in gzread.c
+- Match type exactly of zcalloc() in zutil.c to zlib.h alloc_func
+- Provide prototypes for *64 functions when building zlib without LFS
+- Don't use -lc when linking shared library on MinGW
+- Remove errno.h check in configure and vestigial errno code in zutil.h
+
+Changes in 1.2.4 (14 Mar 2010)
 - Fix VER3 extraction in configure for no fourth subversion
 - Update zlib.3, add docs to Makefile.in to make .pdf out of it
 - Add zlib.3.pdf to distribution
@@ -30,6 +205,8 @@ Changes in 1.2.4 (13 Mar 2010)
 - Fix name change from inflate.h in contrib/inflate86/inffas86.c
 - Check if temporary file exists before removing in make_vms.com [Zinser]
 - Fix make install and uninstall for --static option
+- Fix usage of _MSC_VER in gzguts.h and zutil.h [Truta]
+- Update readme.txt in contrib/masmx64 and masmx86 to assemble
 
 Changes in 1.2.3.9 (21 Feb 2010)
 - Expunge gzio.c
@@ -97,7 +274,7 @@ Changes in 1.2.3.6 (17 Jan 2010)
 - Correct email address in configure for system options
 - Update make_vms.com and add make_vms.com to contrib/minizip [Zinser]
 - Update zlib.map [Brown]
-- Fix Makefile.in for Solaris 10 make of example64 and minizip64 [T<EFBFBD>r<EFBFBD>k]
+- Fix Makefile.in for Solaris 10 make of example64 and minizip64 [Torok]
 - Apply various fixes to CMakeLists.txt [Lowman]
 - Add checks on len in gzread() and gzwrite()
 - Add error message for no more room for gzungetc()
@@ -181,7 +358,7 @@ Changes in 1.2.3.4 (21 Dec 2009)
 - Clear bytes after deflate lookahead to avoid use of uninitialized data
 - Change a limit in inftrees.c to be more transparent to Coverity Prevent
 - Update win32/zlib.def with exported symbols from zlib.h
-- Correct spelling error in zlib.h [Willem]
+- Correct spelling errors in zlib.h [Willem, Sobrado]
 - Allow Z_BLOCK for deflate() to force a new block
 - Allow negative bits in inflatePrime() to delete existing bit buffer
 - Add Z_TREES flush option to inflate() to return at end of trees

FAQ

@@ -25,7 +25,7 @@ The lastest zlib FAQ is at http://zlib.net/zlib_faq.html
 
  4. compress() returns Z_BUF_ERROR.
 
-    Make sure that before the call of compress, the length of the compressed
+    Make sure that before the call of compress(), the length of the compressed
     buffer is equal to the available size of the compressed buffer and not
     zero.  For Visual Basic, check that this parameter is passed by reference
     ("as any"), not by value ("as long").
@@ -44,8 +44,8 @@ The lastest zlib FAQ is at http://zlib.net/zlib_faq.html
 
  6. Where's the zlib documentation (man pages, etc.)?
 
-    It's in zlib.h .  Examples of zlib usage are in the files example.c and
+    It's in zlib.h .  Examples of zlib usage are in the files test/example.c
-    minigzip.c, with more in examples/ .
+    and test/minigzip.c, with more in examples/ .
 
  7. Why don't you use GNU autoconf or libtool or ...?
 
@@ -84,8 +84,10 @@ The lastest zlib FAQ is at http://zlib.net/zlib_faq.html
 
 13. How can I make a Unix shared library?
 
-    make clean
+    By default a shared (and a static) library is built for Unix.  So:
-    ./configure -s
+
+    make distclean
+    ./configure
     make
 
 14. How do I install a shared zlib library on Unix?
@@ -108,8 +110,8 @@ The lastest zlib FAQ is at http://zlib.net/zlib_faq.html
 
 16. Can zlib decode Flate data in an Adobe PDF file?
 
-    Yes. See http://www.fastio.com/ (ClibPDF), or http://www.pdflib.com/ .
+    Yes. See http://www.pdflib.com/ . To modify PDF forms, see
-    To modify PDF forms, see http://sourceforge.net/projects/acroformtool/ .
+    http://sourceforge.net/projects/acroformtool/ .
 
 17. Why am I getting this "register_frame_info not found" error on Solaris?
 
@@ -152,8 +154,8 @@ The lastest zlib FAQ is at http://zlib.net/zlib_faq.html
     Yes.  However any library routines that zlib uses and any application-
     provided memory allocation routines must also be thread-safe.  zlib's gz*
     functions use stdio library routines, and most of zlib's functions use the
-    library memory allocation routines by default.  zlib's Init functions allow
+    library memory allocation routines by default.  zlib's *Init* functions
-    for the application to provide custom memory allocation routines.
+    allow for the application to provide custom memory allocation routines.
 
     Of course, you should only operate on any given zlib or gzip stream from a
     single thread at a time.
@@ -325,7 +327,7 @@ The lastest zlib FAQ is at http://zlib.net/zlib_faq.html
     correctly points to the zlib specification in RFC 1950 for the "deflate"
     transfer encoding, there have been reports of servers and browsers that
     incorrectly produce or expect raw deflate data per the deflate
-    specficiation in RFC 1951, most notably Microsoft.  So even though the
+    specification in RFC 1951, most notably Microsoft.  So even though the
     "deflate" transfer encoding using the zlib format would be the more
     efficient approach (and in fact exactly what the zlib format was designed
     for), using the "gzip" transfer encoding is probably more reliable due to
@@ -354,7 +356,7 @@ The lastest zlib FAQ is at http://zlib.net/zlib_faq.html
 
     No.  The files in contrib are not part of zlib.  They were contributed by
     other authors and are provided as a convenience to the user within the zlib
-    distribution.  Each of the items in contrib have their own license.
+    distribution.  Each item in contrib has its own license.
 
 43. Is zlib subject to export controls?  What is its ECCN?
 

INDEX

@@ -7,6 +7,9 @@ Makefile.in     template for Unix Makefile
 README          guess what
 configure       configure script for Unix
 make_vms.com    makefile for VMS
+test/example.c  zlib usages examples for build testing
+test/minigzip.c minimal gzip-like functionality for build testing
+test/infcover.c inf*.c code coverage for build coverage testing
 treebuild.xml   XML description of source file dependencies
 zconf.h.cmakein zconf.h template for cmake
 zconf.h.in      zconf.h template for configure
@@ -17,12 +20,12 @@ zlib.pc.in      Template for pkg-config descriptor
 zlib2ansi       perl script to convert source files for C++ compilation
 
 amiga/          makefiles for Amiga SAS C
+as400/          makefiles for AS/400
 doc/            documentation for formats and algorithms
 msdos/          makefiles for MSDOS
 nintendods/     makefile for Nintendo DS
 old/            makefiles for various architectures and zlib documentation
                 files that have not yet been updated for zlib 1.2.x
-projects/       projects for various Integrated Development Environments
 qnx/            makefiles for QNX
 watcom/         makefiles for OpenWatcom
 win32/          makefiles for Windows
@@ -57,10 +60,8 @@ uncompr.c
 zutil.c
 zutil.h
 
-                source files for sample programs:
+                source files for sample programs
-example.c
+See examples/README.examples
-minigzip.c
-See examples/README.examples for more
 
-                unsupported contribution by third parties
+                unsupported contributions by third parties
 See contrib/README.contrib

Makefile.in

@@ -1,5 +1,5 @@
 # Makefile for zlib
-# Copyright (C) 1995-2010 Jean-loup Gailly.
+# Copyright (C) 1995-2011 Jean-loup Gailly.
 # For conditions of distribution and use, see copyright notice in zlib.h
 
 # To compile and test, type:
@@ -25,19 +25,22 @@ CFLAGS=-O
 #           -Wstrict-prototypes -Wmissing-prototypes
 
 SFLAGS=-O
-
+LDFLAGS=
-LDFLAGS=-L. libz.a
+TEST_LDFLAGS=-L. libz.a
 LDSHARED=$(CC)
 CPP=$(CC) -E
 
 STATICLIB=libz.a
 SHAREDLIB=libz.so
-SHAREDLIBV=libz.so.1.2.4
+SHAREDLIBV=libz.so.1.2.5.2
 SHAREDLIBM=libz.so.1
-LIBS=$(STATICLIB) $(SHAREDLIB) $(SHAREDLIBV)
+LIBS=$(STATICLIB) $(SHAREDLIBV)
 
-AR=ar rc
+AR=ar
+ARFLAGS=rc
 RANLIB=ranlib
+LDCONFIG=ldconfig
+LDSHAREDLIBC=-lc
 TAR=tar
 SHELL=/bin/sh
 EXE=
@@ -45,16 +48,20 @@ EXE=
 prefix = /usr/local
 exec_prefix = ${prefix}
 libdir = ${exec_prefix}/lib
+sharedlibdir = ${libdir}
 includedir = ${prefix}/include
 mandir = ${prefix}/share/man
 man3dir = ${mandir}/man3
 pkgconfigdir = ${libdir}/pkgconfig
+tempfile := $(shell mktemp -u __XXXXXX)
 
-OBJC = adler32.o compress.o crc32.o deflate.o gzclose.o gzlib.o gzread.o \
+OBJZ = adler32.o crc32.o deflate.o infback.o inffast.o inflate.o inftrees.o trees.o zutil.o
-	gzwrite.o infback.o inffast.o inflate.o inftrees.o trees.o uncompr.o zutil.o
+OBJG = compress.o uncompr.o gzclose.o gzlib.o gzread.o gzwrite.o
+OBJC = $(OBJZ) $(OBJG)
 
-PIC_OBJC = adler32.lo compress.lo crc32.lo deflate.lo gzclose.lo gzlib.lo gzread.lo \
+PIC_OBJZ = adler32.lo crc32.lo deflate.lo infback.lo inffast.lo inflate.lo inftrees.lo trees.lo zutil.lo
-	gzwrite.lo infback.lo inffast.lo inflate.lo inftrees.lo trees.lo uncompr.lo zutil.lo
+PIC_OBJG = compress.lo uncompr.lo gzclose.lo gzlib.lo gzread.lo gzwrite.lo
+PIC_OBJC = $(PIC_OBJZ) $(PIC_OBJG)
 
 # to use the asm code: make OBJA=match.o, PIC_OBJA=match.lo
 OBJA =
@@ -104,8 +111,19 @@ test64: all64
 	fi
 	-@rm -f foo.gz
 
+infcover.o: test/infcover.c zlib.h zconf.h
+	$(CC) $(CFLAGS) -I. -c -o $@ test/infcover.c
+
+infcover: infcover.o libz.a
+	$(CC) $(CFLAGS) -o $@ infcover.o libz.a
+
+cover: infcover
+	rm -f *.gcda
+	./infcover
+	gcov inf*.c
+
 libz.a: $(OBJS)
-	$(AR) $@ $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
 	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
 
 match.o: match.S
@@ -120,31 +138,37 @@ match.lo: match.S
 	mv _match.o match.lo
 	rm -f _match.s
 
-example64.o: example.c zlib.h zconf.h
+example.o: test/example.c zlib.h zconf.h
-	$(CC) $(CFLAGS) -D_FILE_OFFSET_BITS=64 -c -o $@ example.c
+	$(CC) $(CFLAGS) -I. -c -o $@ test/example.c
 
-minigzip64.o: minigzip.c zlib.h zconf.h
+minigzip.o: test/minigzip.c zlib.h zconf.h
-	$(CC) $(CFLAGS) -D_FILE_OFFSET_BITS=64 -c -o $@ minigzip.c
+	$(CC) $(CFLAGS) -I. -c -o $@ test/minigzip.c
+
+example64.o: test/example.c zlib.h zconf.h
+	$(CC) $(CFLAGS) -I. -D_FILE_OFFSET_BITS=64 -c -o $@ test/example.c
+
+minigzip64.o: test/minigzip.c zlib.h zconf.h
+	$(CC) $(CFLAGS) -I. -D_FILE_OFFSET_BITS=64 -c -o $@ test/minigzip.c
 
 .SUFFIXES: .lo
 
 .c.lo:
-	-@if [ ! -d objs ]; then mkdir objs; fi
+	-@mkdir objs 2>/dev/null || test -d objs
 	$(CC) $(SFLAGS) -DPIC -c -o objs/$*.o $<
 	-@mv objs/$*.o $@
 
-$(SHAREDLIBV): $(PIC_OBJS)
+placebo $(SHAREDLIBV): $(PIC_OBJS) libz.a
-	$(LDSHARED) $(SFLAGS) -o $@ $(PIC_OBJS) -lc
+	$(LDSHARED) $(SFLAGS) -o $@ $(PIC_OBJS) $(LDSHAREDLIBC) $(LDFLAGS)
 	rm -f $(SHAREDLIB) $(SHAREDLIBM)
 	ln -s $@ $(SHAREDLIB)
 	ln -s $@ $(SHAREDLIBM)
 	-@rmdir objs
 
 example$(EXE): example.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
+	$(CC) $(CFLAGS) -o $@ example.o $(TEST_LDFLAGS)
 
 minigzip$(EXE): minigzip.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
+	$(CC) $(CFLAGS) -o $@ minigzip.o $(TEST_LDFLAGS)
 
 examplesh$(EXE): example.o $(SHAREDLIBV)
 	$(CC) $(CFLAGS) -o $@ example.o -L. $(SHAREDLIBV)
@@ -153,25 +177,29 @@ minigzipsh$(EXE): minigzip.o $(SHAREDLIBV)
 	$(CC) $(CFLAGS) -o $@ minigzip.o -L. $(SHAREDLIBV)
 
 example64$(EXE): example64.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ example64.o $(LDFLAGS)
+	$(CC) $(CFLAGS) -o $@ example64.o $(TEST_LDFLAGS)
 
 minigzip64$(EXE): minigzip64.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ minigzip64.o $(LDFLAGS)
+	$(CC) $(CFLAGS) -o $@ minigzip64.o $(TEST_LDFLAGS)
 
 install-libs: $(LIBS)
 	-@if [ ! -d $(DESTDIR)$(exec_prefix)  ]; then mkdir -p $(DESTDIR)$(exec_prefix); fi
 	-@if [ ! -d $(DESTDIR)$(libdir)       ]; then mkdir -p $(DESTDIR)$(libdir); fi
+	-@if [ ! -d $(DESTDIR)$(sharedlibdir) ]; then mkdir -p $(DESTDIR)$(sharedlibdir); fi
 	-@if [ ! -d $(DESTDIR)$(man3dir)      ]; then mkdir -p $(DESTDIR)$(man3dir); fi
 	-@if [ ! -d $(DESTDIR)$(pkgconfigdir) ]; then mkdir -p $(DESTDIR)$(pkgconfigdir); fi
-	cp $(LIBS) $(DESTDIR)$(libdir)
+	cp $(STATICLIB) $(DESTDIR)$(libdir)
-	cd $(DESTDIR)$(libdir); chmod u=rw,go=r $(STATICLIB)
+	chmod 644 $(DESTDIR)$(libdir)/$(STATICLIB)
-	-@(cd $(DESTDIR)$(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
+	-@($(RANLIB) $(DESTDIR)$(libdir)/libz.a || true) >/dev/null 2>&1
-	-@cd $(DESTDIR)$(libdir); if test "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \
+	-@if test -n "$(SHAREDLIBV)"; then \
-	  chmod 755 $(SHAREDLIBV); \
+	  cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir); \
-	  rm -f $(SHAREDLIB) $(SHAREDLIBM); \
+	  echo "cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)"; \
-	  ln -s $(SHAREDLIBV) $(SHAREDLIB); \
+	  chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV); \
-	  ln -s $(SHAREDLIBV) $(SHAREDLIBM); \
+	  echo "chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV)"; \
-	  (ldconfig || true)  >/dev/null 2>&1; \
+	  rm -f $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \
+	  ln -s $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB); \
+	  ln -s $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \
+	  ($(LDCONFIG) || true)  >/dev/null 2>&1; \
 	fi
 	cp zlib.3 $(DESTDIR)$(man3dir)
 	chmod 644 $(DESTDIR)$(man3dir)/zlib.3
@@ -188,7 +216,7 @@ install: install-libs
 uninstall:
 	cd $(DESTDIR)$(includedir); rm -f zlib.h zconf.h
 	cd $(DESTDIR)$(libdir); rm -f libz.a; \
-	if test "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \
+	if test -n "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \
 	  rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \
 	fi
 	cd $(DESTDIR)$(man3dir); rm -f zlib.3
@@ -199,9 +227,11 @@ docs: zlib.3.pdf
 zlib.3.pdf: zlib.3
 	groff -mandoc -f H -T ps zlib.3 | ps2pdf - zlib.3.pdf
 
-zconf.h.in: zconf.h.cmakein
+zconf.h.cmakein: zconf.h.in
-	sed "/^#cmakedefine/D" < zconf.h.cmakein > zconf.h.in
+	-@echo "/#define ZCONF_H/ a\\\\\n#cmakedefine Z_PREFIX\\\\\n#cmakedefine Z_HAVE_UNISTD_H\n" > $(tempfile)
-	touch -r zconf.h.cmakein zconf.h.in
+	-@sed -f $(tempfile) zconf.h.in > zconf.h.cmakein
+	-@touch -r zconf.h.in zconf.h.cmakein
+	-@rm $(tempfile)
 
 zconf: zconf.h.in
 	cp -p zconf.h.in zconf.h
@@ -211,12 +241,15 @@ clean:
 	rm -f *.o *.lo *~ \
 	   example$(EXE) minigzip$(EXE) examplesh$(EXE) minigzipsh$(EXE) \
 	   example64$(EXE) minigzip64$(EXE) \
+	   infcover \
 	   libz.* foo.gz so_locations \
 	   _match.s maketree contrib/infback9/*.o
 	rm -rf objs
+	rm -f *.gcda *.gcno *.gcov
+	rm -f contrib/infback9/*.gcda contrib/infback9/*.gcno contrib/infback9/*.gcov
 
 maintainer-clean: distclean
-distclean: clean zconf docs
+distclean: clean zconf zconf.h.cmakein docs
 	rm -f Makefile zlib.pc
 	-@rm -f .DS_Store
 	-@printf 'all:\n\t-@echo "Please use ./configure first.  Thank you."\n' > Makefile

README

@@ -1,22 +1,23 @@
 ZLIB DATA COMPRESSION LIBRARY
 
-zlib 1.2.4 is a general purpose data compression library.  All the code is
+zlib 1.2.5.2 is a general purpose data compression library.  All the code is
 thread safe.  The data format used by the zlib library is described by RFCs
 (Request for Comments) 1950 to 1952 in the files
-http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
+http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
-and rfc1952.txt (gzip format).
+rfc1952 (gzip format).
 
 All functions of the compression library are documented in the file zlib.h
 (volunteer to write man pages welcome, contact zlib@gzip.org).  A usage example
-of the library is given in the file example.c which also tests that the library
+of the library is given in the file test/example.c which also tests that
-is working correctly.  Another example is given in the file minigzip.c.  The
+the library is working correctly.  Another example is given in the file
-compression library itself is composed of all source files except example.c and
+test/minigzip.c.  The compression library itself is composed of all source
-minigzip.c.
+files in the root directory.
 
 To compile all files and run the test program, follow the instructions given at
 the top of Makefile.in.  In short "./configure; make test", and if that goes
-well, "make install" should work for most flavors of Unix.  For Windows, use one
+well, "make install" should work for most flavors of Unix.  For Windows, use
-of the special makefiles in win32/ or projects/ .  For VMS, use make_vms.com.
+one of the special makefiles in win32/ or contrib/vstudio/ .  For VMS, use
+make_vms.com.
 
 Questions about zlib should be sent to <zlib@gzip.org>, or to Gilles Vollant
 <info@winimage.com> for the Windows DLL version.  The zlib home page is
@@ -30,7 +31,7 @@ Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan.  1997
 issue of Dr.  Dobb's Journal; a copy of the article is available at
 http://marknelson.us/1997/01/01/zlib-engine/ .
 
-The changes made in version 1.2.4 are documented in the file ChangeLog.
+The changes made in version 1.2.5.2 are documented in the file ChangeLog.
 
 Unsupported third party contributions are provided in directory contrib/ .
 
@@ -43,7 +44,7 @@ http://search.cpan.org/~pmqs/IO-Compress-Zlib/ .
 
 A Python interface to zlib written by A.M. Kuchling <amk@amk.ca> is
 available in Python 1.5 and later versions, see
-http://www.python.org/doc/lib/module-zlib.html .
+http://docs.python.org/library/zlib.html .
 
 zlib is built into tcl: http://wiki.tcl.tk/4610 .
 
@@ -83,7 +84,7 @@ Acknowledgments:
 
 Copyright notice:
 
- (C) 1995-2010 Jean-loup Gailly and Mark Adler
+ (C) 1995-2011 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages

adler32.c

@@ -1,5 +1,5 @@
 /* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-2007 Mark Adler
+ * Copyright (C) 1995-2011 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -9,9 +9,9 @@
 
 #define local static
 
-local uLong adler32_combine_(uLong adler1, uLong adler2, z_off64_t len2);
+local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
 
-#define BASE 65521UL    /* largest prime smaller than 65536 */
+#define BASE 65521      /* largest prime smaller than 65536 */
 #define NMAX 5552
 /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
 
@@ -21,39 +21,44 @@ local uLong adler32_combine_(uLong adler1, uLong adler2, z_off64_t len2);
 #define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
 #define DO16(buf)   DO8(buf,0); DO8(buf,8);
 
-/* use NO_DIVIDE if your processor does not do division in hardware */
+/* use NO_DIVIDE if your processor does not do division in hardware --
+   try it both ways to see which is faster */
 #ifdef NO_DIVIDE
-#  define MOD(a) \
+/* note that this assumes BASE is 65521, where 65536 % 65521 == 15
+   (thank you to John Reiser for pointing this out) */
+#  define CHOP(a) \
     do { \
-        if (a >= (BASE << 16)) a -= (BASE << 16); \
+        unsigned long tmp = a >> 16; \
-        if (a >= (BASE << 15)) a -= (BASE << 15); \
+        a &= 0xffffUL; \
-        if (a >= (BASE << 14)) a -= (BASE << 14); \
+        a += (tmp << 4) - tmp; \
-        if (a >= (BASE << 13)) a -= (BASE << 13); \
+    } while (0)
-        if (a >= (BASE << 12)) a -= (BASE << 12); \
+#  define MOD28(a) \
-        if (a >= (BASE << 11)) a -= (BASE << 11); \
+    do { \
-        if (a >= (BASE << 10)) a -= (BASE << 10); \
+        CHOP(a); \
-        if (a >= (BASE << 9)) a -= (BASE << 9); \
-        if (a >= (BASE << 8)) a -= (BASE << 8); \
-        if (a >= (BASE << 7)) a -= (BASE << 7); \
-        if (a >= (BASE << 6)) a -= (BASE << 6); \
-        if (a >= (BASE << 5)) a -= (BASE << 5); \
-        if (a >= (BASE << 4)) a -= (BASE << 4); \
-        if (a >= (BASE << 3)) a -= (BASE << 3); \
-        if (a >= (BASE << 2)) a -= (BASE << 2); \
-        if (a >= (BASE << 1)) a -= (BASE << 1); \
         if (a >= BASE) a -= BASE; \
     } while (0)
-#  define MOD4(a) \
+#  define MOD(a) \
     do { \
-        if (a >= (BASE << 4)) a -= (BASE << 4); \
+        CHOP(a); \
-        if (a >= (BASE << 3)) a -= (BASE << 3); \
+        MOD28(a); \
-        if (a >= (BASE << 2)) a -= (BASE << 2); \
+    } while (0)
-        if (a >= (BASE << 1)) a -= (BASE << 1); \
+#  define MOD63(a) \
+    do { /* this assumes a is not negative */ \
+        z_off64_t tmp = a >> 32; \
+        a &= 0xffffffffL; \
+        a += (tmp << 8) - (tmp << 5) + tmp; \
+        tmp = a >> 16; \
+        a &= 0xffffL; \
+        a += (tmp << 4) - tmp; \
+        tmp = a >> 16; \
+        a &= 0xffffL; \
+        a += (tmp << 4) - tmp; \
         if (a >= BASE) a -= BASE; \
     } while (0)
 #else
 #  define MOD(a) a %= BASE
-#  define MOD4(a) a %= BASE
+#  define MOD28(a) a %= BASE
+#  define MOD63(a) a %= BASE
 #endif
 
 /* ========================================================================= */
@@ -92,7 +97,7 @@ uLong ZEXPORT adler32(adler, buf, len)
         }
         if (adler >= BASE)
             adler -= BASE;
-        MOD4(sum2);             /* only added so many BASE's */
+        MOD28(sum2);            /* only added so many BASE's */
         return adler | (sum2 << 16);
     }
 
@@ -137,8 +142,13 @@ local uLong adler32_combine_(adler1, adler2, len2)
     unsigned long sum2;
     unsigned rem;
 
+    /* for negative len, return invalid adler32 as a clue for debugging */
+    if (len2 < 0)
+        return 0xffffffffUL;
+
     /* the derivation of this formula is left as an exercise for the reader */
-    rem = (unsigned)(len2 % BASE);
+    MOD63(len2);                /* assumes len2 >= 0 */
+    rem = (unsigned)len2;
     sum1 = adler1 & 0xffff;
     sum2 = rem * sum1;
     MOD(sum2);

as400/bndsrc

@@ -33,7 +33,9 @@ STRPGMEXP PGMLVL(*CURRENT) SIGNATURE('ZLIB')
   EXPORT SYMBOL("deflateSetDictionary")
   EXPORT SYMBOL("deflateCopy")
   EXPORT SYMBOL("deflateReset")
+  EXPORT SYMBOL("deflateResetKeep")
   EXPORT SYMBOL("deflateParams")
+  EXPORT SYMBOL("deflatePending")
   EXPORT SYMBOL("deflatePrime")
   EXPORT SYMBOL("deflateInit_")
   EXPORT SYMBOL("deflateInit2_")
@@ -51,7 +53,6 @@ STRPGMEXP PGMLVL(*CURRENT) SIGNATURE('ZLIB')
   EXPORT SYMBOL("gzputs")
   EXPORT SYMBOL("gzgets")
   EXPORT SYMBOL("gzputc")
-  EXPORT SYMBOL("gzgetc")
   EXPORT SYMBOL("gzflush")
   EXPORT SYMBOL("gzseek")
   EXPORT SYMBOL("gzrewind")
@@ -129,4 +130,57 @@ STRPGMEXP PGMLVL(*CURRENT) SIGNATURE('ZLIB')
 
   EXPORT SYMBOL("zlibCompileFlags")
 
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+/*   Version 1.2.5 additional entry points.                         */
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+
+/********************************************************************/
+/*   *MODULE      ADLER32      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("adler32_combine")
+  EXPORT SYMBOL("adler32_combine64")
+
+/********************************************************************/
+/*   *MODULE      CRC32        ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("crc32_combine")
+  EXPORT SYMBOL("crc32_combine64")
+
+/********************************************************************/
+/*   *MODULE      GZLIB        ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("gzbuffer")
+  EXPORT SYMBOL("gzoffset")
+  EXPORT SYMBOL("gzoffset64")
+  EXPORT SYMBOL("gzopen64")
+  EXPORT SYMBOL("gzseek64")
+  EXPORT SYMBOL("gztell64")
+
+/********************************************************************/
+/*   *MODULE      GZREAD       ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("gzclose_r")
+
+/********************************************************************/
+/*   *MODULE      GZWRITE      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("gzclose_w")
+  EXPORT SYMBOL("gzgetc_")
+  EXPORT SYMBOL("gzflags")
+
+/********************************************************************/
+/*   *MODULE      INFLATE      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("inflateMark")
+  EXPORT SYMBOL("inflatePrime")
+  EXPORT SYMBOL("inflateReset2")
+  EXPORT SYMBOL("inflateUndermine")
+  EXPORT SYMBOL("inflateResetKeep")
+
 ENDPGMEXP

as400/compile.clp

@@ -0,0 +1,110 @@
+/******************************************************************************/
+/*                                                                            */
+/*  ZLIB                                                                      */
+/*                                                                            */
+/*    Compile sources into modules and link them into a service program.      */
+/*                                                                            */
+/******************************************************************************/
+
+             PGM
+
+/*      Configuration adjustable parameters.                                  */
+
+             DCL        VAR(&SRCLIB) TYPE(*CHAR) LEN(10) +
+                          VALUE('ZLIB')                         /* Source library. */
+             DCL        VAR(&SRCFILE) TYPE(*CHAR) LEN(10) +
+                          VALUE('SOURCES')                      /* Source member file. */
+             DCL        VAR(&CTLFILE) TYPE(*CHAR) LEN(10) +
+                          VALUE('TOOLS')                        /* Control member file. */
+
+             DCL        VAR(&MODLIB) TYPE(*CHAR) LEN(10) +
+                          VALUE('ZLIB')                         /* Module library. */
+
+             DCL        VAR(&SRVLIB) TYPE(*CHAR) LEN(10) +
+                          VALUE('LGPL')                         /* Service program library. */
+
+             DCL        VAR(&CFLAGS) TYPE(*CHAR) +
+                          VALUE('OPTIMIZE(40)')                 /* Compile options. */
+
+             DCL        VAR(&TGTRLS) TYPE(*CHAR) +
+                          VALUE('V5R3M0')                       /* Target release. */
+
+
+/*      Working storage.                                                      */
+
+             DCL        VAR(&CMDLEN) TYPE(*DEC) LEN(15 5) VALUE(300)    /* Command length. */
+             DCL        VAR(&CMD) TYPE(*CHAR) LEN(512)
+             DCL        VAR(&FIXDCMD) TYPE(*CHAR) LEN(512)
+
+
+/*      Compile sources into modules.                                         */
+
+             CHGVAR     VAR(&FIXDCMD) VALUE('CRTCMOD' *BCAT &CFLAGS *BCAT      +
+                        'SYSIFCOPT(*IFS64IO)' *BCAT                            +
+                        'DEFINE(''_LARGEFILE64_SOURCE''' *BCAT                 +
+                        '''_LFS64_LARGEFILE=1'') TGTRLS(' *TCAT &TGTRLS *TCAT  +
+                        ') SRCFILE(' *TCAT &SRCLIB *TCAT '/' *TCAT             +
+                        &SRCFILE *TCAT ') MODULE(' *TCAT &MODLIB *TCAT '/')
+
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'ADLER32)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'COMPRESS)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'CRC32)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'DEFLATE)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZCLOSE)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZLIB)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZREAD)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZWRITE)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFBACK)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFFAST)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFLATE)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFTREES)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'TREES)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'UNCOMPR)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'ZUTIL)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+
+/*      Link modules into a service program.                                  */
+
+             CRTSRVPGM  SRVPGM(&SRVLIB/ZLIB) +
+                          MODULE(&MODLIB/ADLER32     &MODLIB/COMPRESS    +
+                                 &MODLIB/CRC32       &MODLIB/DEFLATE     +
+                                 &MODLIB/GZCLOSE     &MODLIB/GZLIB       +
+                                 &MODLIB/GZREAD      &MODLIB/GZWRITE     +
+                                 &MODLIB/INFBACK     &MODLIB/INFFAST     +
+                                 &MODLIB/INFLATE     &MODLIB/INFTREES    +
+                                 &MODLIB/TREES       &MODLIB/UNCOMPR     +
+                                 &MODLIB/ZUTIL)                          +
+                          SRCFILE(&SRCLIB/&CTLFILE) SRCMBR(BNDSRC)       +
+                          TEXT('ZLIB 1.2.5.2') TGTRLS(&TGTRLS)
+
+             ENDPGM

as400/readme.txt

@@ -1,4 +1,4 @@
-        ZLIB version 1.2.3 for AS400 installation instructions
+        ZLIB version 1.2.5.2 for AS400 installation instructions
 
 I) From an AS400 *SAVF file:
 
@@ -70,7 +70,10 @@ II) From the original source distribution:
     compress.c          COMPRESS C     ZLIB - Compress a memory buffer
     crc32.c             CRC32    C     ZLIB - Compute the CRC-32 of a data stream
     deflate.c           DEFLATE  C     ZLIB - Compress data using the deflation algorithm
-    gzio.c              GZIO     C     ZLIB - IO on .gz files
+    gzclose.c           GZCLOSE  C     ZLIB - Close .gz files
+    gzlib.c             GZLIB    C     ZLIB - Miscellaneous .gz files IO support
+    gzread.c            GZREAD   C     ZLIB - Read .gz files
+    gzwrite.c           GZWRITE  C     ZLIB - Write .gz files
     infback.c           INFBACK  C     ZLIB - Inflate using a callback interface
     inffast.c           INFFAST  C     ZLIB - Fast proc. literals & length/distance pairs
     inflate.c           INFLATE  C     ZLIB - Interface to inflate modules
@@ -81,6 +84,7 @@ II) From the original source distribution:
                 H                      Original ZLIB C and ILE/RPG include files
     crc32.h             CRC32    C     ZLIB - CRC32 tables
     deflate.h           DEFLATE  C     ZLIB - Internal compression state
+    gzguts.h            GZGUTS   C     ZLIB - Definitions for the gzclose module
     inffast.h           INFFAST  C     ZLIB - Header to use inffast.c
     inffixed.h          INFFIXED C     ZLIB - Table for decoding fixed codes
     inflate.h           INFLATE  C     ZLIB - Internal inflate state definitions
@@ -108,4 +112,4 @@ Notes:  For AS400 ILE RPG programmers, a /copy member defining the ZLIB
                 implementation does not handle conversion from/to ASCII, so
                 text data code conversions must be done explicitely.
 
-        Always open zipped files in binary mode.
+        Mainly for the reason above, always open zipped files in binary mode.

as400/zlib.inc

@@ -1,7 +1,7 @@
       *  ZLIB.INC - Interface to the general purpose compression library
       *
       *  ILE RPG400 version by Patrick Monnerat, DATASPHERE.
-      *  Version 1.2.3.9
+      *  Version 1.2.5.2
       *
       *
       *  WARNING:
@@ -22,16 +22,25 @@
       *
       *  Versioning information.
       *
-     D ZLIB_VERSION    C                   '1.2.3.9'
+     D ZLIB_VERSION    C                   '1.2.5.2'
-     D ZLIB_VERNUM     C                   X'1239'
+     D ZLIB_VERNUM     C                   X'1252'
+     D ZLIB_VER_MAJOR  C                   1
+     D ZLIB_VER_MINOR  C                   2
+     D ZLIB_VER_REVISION...
+     D                 C                   5
+     D ZLIB_VER_SUBREVISION...
+     D                 C                   0
       *
       *  Other equates.
       *
      D Z_NO_FLUSH      C                   0
+     D Z_PARTIAL_FLUSH...
+     D                 C                   1
      D Z_SYNC_FLUSH    C                   2
      D Z_FULL_FLUSH    C                   3
      D Z_FINISH        C                   4
      D Z_BLOCK         C                   5
+     D Z_TREES         C                   6
       *
      D Z_OK            C                   0
      D Z_STREAM_END    C                   1
@@ -72,6 +81,7 @@
      D z_streamp       S               *                                        Stream struct ptr
      D gzFile          S               *                                        File pointer
      D z_off_t         S             10i 0                                      Stream offsets
+     D z_off64_t       S             20i 0                                      Stream offsets
       *
       **************************************************************************
       *                               Structures
@@ -122,20 +132,36 @@
      D  source                    32767    const options(*varsize)              Source buffer
      D  sourceLen                    10U 0 value                                Source length
       *
+      /if not defined(LARGE_FILES)
      D gzopen          PR                  extproc('gzopen')
      D                                     like(gzFile)
      D  path                           *   value options(*string)               File pathname
      D  mode                           *   value options(*string)               Open mode
+      /else
+     D gzopen          PR                  extproc('gzopen64')
+     D                                     like(gzFile)
+     D  path                           *   value options(*string)               File pathname
+     D  mode                           *   value options(*string)               Open mode
+      *
+     D gzopen64        PR                  extproc('gzopen64')
+     D                                     like(gzFile)
+     D  path                           *   value options(*string)               File pathname
+     D  mode                           *   value options(*string)               Open mode
+      /endif
       *
      D gzdopen         PR                  extproc('gzdopen')
      D                                     like(gzFile)
-     D  fd                           10i 0 value                                File descriptor
+     D  fd                           10I 0 value                                File descriptor
      D  mode                           *   value options(*string)               Open mode
       *
+     D gzbuffer        PR            10I 0 extproc('gzbuffer')
+     D  file                               value like(gzFile)                   File pointer
+     D  size                         10U 0 value
+      *
      D gzsetparams     PR            10I 0 extproc('gzsetparams')
      D  file                               value like(gzFile)                   File pointer
      D  level                        10I 0 value
-     D  strategy                     10i 0 value
+     D  strategy                     10I 0 value
       *
      D gzread          PR            10I 0 extproc('gzread')
      D  file                               value like(gzFile)                   File pointer
@@ -156,24 +182,79 @@
      D  buf                       32767    options(*varsize)                    Read buffer
      D  len                          10i 0 value                                Buffer length
       *
+     D gzputc          PR            10i 0 extproc('gzputc')
+     D  file                               value like(gzFile)                   File pointer
+     D  c                            10I 0 value                                Character to write
+      *
+     D gzgetc_         PR            10i 0 extproc('gzgetc_')
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gzungetc        PR            10i 0 extproc('gzungetc')
+     D  c                            10I 0 value                                Character to push
+     D  file                               value like(gzFile)                   File pointer
+      *
      D gzflush         PR            10i 0 extproc('gzflush')
      D  file                               value like(gzFile)                   File pointer
      D  flush                        10I 0 value                                Type of flush
       *
+      /if not defined(LARGE_FILES)
      D gzseek          PR                  extproc('gzseek')
      D                                     like(z_off_t)
      D  file                               value like(gzFile)                   File pointer
      D  offset                             value like(z_off_t)                  Offset
      D  whence                       10i 0 value                                Origin
+      /else
+     D gzseek          PR                  extproc('gzseek64')
+     D                                     like(z_off_t)
+     D  file                               value like(gzFile)                   File pointer
+     D  offset                             value like(z_off_t)                  Offset
+     D  whence                       10i 0 value                                Origin
+      *
+     D gzseek64        PR                  extproc('gzseek64')
+     D                                     like(z_off64_t)
+     D  file                               value like(gzFile)                   File pointer
+     D  offset                             value like(z_off64_t)                Offset
+     D  whence                       10i 0 value                                Origin
+      /endif
       *
      D gzrewind        PR            10i 0 extproc('gzrewind')
      D  file                               value like(gzFile)                   File pointer
       *
+      /if not defined(LARGE_FILES)
      D gztell          PR                  extproc('gztell')
      D                                     like(z_off_t)
      D  file                               value like(gzFile)                   File pointer
+      /else
+     D gztell          PR                  extproc('gztell64')
+     D                                     like(z_off_t)
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gztell64        PR                  extproc('gztell64')
+     D                                     like(z_off64_t)
+     D  file                               value like(gzFile)                   File pointer
+      /endif
+      *
+      /if not defined(LARGE_FILES)
+     D gzoffset        PR                  extproc('gzoffset')
+     D                                     like(z_off_t)
+     D  file                               value like(gzFile)                   File pointer
+      /else
+     D gzoffset        PR                  extproc('gzoffset64')
+     D                                     like(z_off_t)
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gzoffset64      PR                  extproc('gzoffset64')
+     D                                     like(z_off64_t)
+     D  file                               value like(gzFile)                   File pointer
+      /endif
       *
      D gzeof           PR            10i 0 extproc('gzeof')
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gzclose_r       PR            10i 0 extproc('gzclose_r')
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gzclose_w       PR            10i 0 extproc('gzclose_w')
      D  file                               value like(gzFile)                   File pointer
       *
      D gzclose         PR            10i 0 extproc('gzclose')
@@ -253,6 +334,11 @@
      D  strm                               like(z_stream)                       Compression stream
      D  sourcelen                    10U 0 value                                Compression level
       *
+     D deflatePending  PR            10I 0 extproc('deflatePending')            Change level & strat
+     D  strm                               like(z_stream)                       Compression stream
+     D  pending                      10U 0                                      Pending bytes
+     D  bits                         10I 0                                      Pending bits
+      *
      D deflatePrime    PR            10I 0 extproc('deflatePrime')              Change level & strat
      D  strm                               like(z_stream)                       Compression stream
      D  bits                         10I 0 value                                Number of bits to insert
@@ -278,6 +364,18 @@
      D  source                             like(z_stream)                       Source stream
       *
      D inflateReset    PR            10I 0 extproc('inflateReset')              End and init. stream
+     D  strm                               like(z_stream)                       Expansion stream
+      *
+     D inflateReset2   PR            10I 0 extproc('inflateReset2')             End and init. stream
+     D  strm                               like(z_stream)                       Expansion stream
+     D  windowBits                   10I 0 value                                Log2(buffer size)
+      *
+     D inflatePrime    PR            10I 0 extproc('inflatePrime')              Insert bits
+     D  strm                               like(z_stream)                       Expansion stream
+     D  bits                         10I 0 value                                Bit count
+     D  value                        10I 0 value                                Bits to insert
+      *
+     D inflateMark     PR            10I 0 extproc('inflateMark')               Get inflate info
      D  strm                               like(z_stream)                       Expansion stream
       *
      D inflateBackInit...
@@ -328,4 +426,19 @@
       *
      D get_crc_table   PR              *   extproc('get_crc_table')             Ptr to ulongs
       *
+     D inflateUndermine...
+     D                 PR            10I 0 extproc('inflateUndermine')
+     D  strm                               like(z_stream)                       Expansion stream
+     D  arg                          10I 0 value                                Error code
+      *
+     D inflateResetKeep...
+     D                 PR            10I 0 extproc('inflateResetKeep')          End and init. stream
+     D  strm                               like(z_stream)                       Expansion stream
+      *
+     D deflateResetKeep...
+     D                 PR            10I 0 extproc('deflateResetKeep')          End and init. stream
+     D  strm                               like(z_stream)                       Expansion stream
+      *
+     D gzflags         PR            10U 0 extproc('gzflags')
+      *
       /endif

configure

@@ -13,27 +13,56 @@
 # If you have problems, try without defining CC and CFLAGS before reporting
 # an error.
 
+if [ -n "${CHOST}" ]; then
+    uname="`echo "${CHOST}" | sed -e 's/^[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)-.*$/\1/'`"
+    CROSS_PREFIX="${CHOST}-"
+fi
+
 STATICLIB=libz.a
-LDFLAGS="${LDFLAGS} -L. ${STATICLIB}"
 VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`
 VER3=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\\.[0-9]*\).*/\1/p' < zlib.h`
 VER2=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\)\\..*/\1/p' < zlib.h`
 VER1=`sed -n -e '/VERSION "/s/.*"\([0-9]*\)\\..*/\1/p' < zlib.h`
-AR=${AR-"ar"}
+if "${CROSS_PREFIX}ar" --version >/dev/null 2>/dev/null || test $? -lt 126; then
-AR_RC="${AR} rc"
+    AR=${AR-"${CROSS_PREFIX}ar"}
-RANLIB=${RANLIB-"ranlib"}
+    test -n "${CROSS_PREFIX}" && echo Using ${AR}
+else
+    AR=${AR-"ar"}
+    test -n "${CROSS_PREFIX}" && echo Using ${AR}
+fi
+ARFLAGS=${ARFLAGS-"rc"}
+if "${CROSS_PREFIX}ranlib" --version >/dev/null 2>/dev/null || test $? -lt 126; then
+    RANLIB=${RANLIB-"${CROSS_PREFIX}ranlib"}
+    test -n "${CROSS_PREFIX}" && echo Using ${RANLIB}
+else
+    RANLIB=${RANLIB-"ranlib"}
+fi
+if "${CROSS_PREFIX}nm" --version >/dev/null 2>/dev/null || test $? -lt 126; then
+    NM=${NM-"${CROSS_PREFIX}nm"}
+    test -n "${CROSS_PREFIX}" && echo Using ${NM}
+else
+    NM=${NM-"nm"}
+fi
+LDCONFIG=${LDCONFIG-"ldconfig"}
+LDSHAREDLIBC="${LDSHAREDLIBC--lc}"
+ARCHS=
 prefix=${prefix-/usr/local}
 exec_prefix=${exec_prefix-'${prefix}'}
 libdir=${libdir-'${exec_prefix}/lib'}
+sharedlibdir=${sharedlibdir-'${libdir}'}
 includedir=${includedir-'${prefix}/include'}
 mandir=${mandir-'${prefix}/share/man'}
 shared_ext='.so'
 shared=1
+solo=0
+cover=0
 zprefix=0
 build64=0
 gcc=0
 old_cc="$CC"
 old_cflags="$CFLAGS"
+OBJC='$(OBJZ) $(OBJG)'
+PIC_OBJC='$(PIC_OBJZ) $(PIC_OBJG)'
 
 while test $# -ge 1
 do
@@ -41,21 +70,26 @@ case "$1" in
     -h* | --help)
       echo 'usage:'
       echo '  configure [--zprefix] [--prefix=PREFIX]  [--eprefix=EXPREFIX]'
-      echo '    [--static] [--64] [--libdir=LIBDIR] [--includedir=INCLUDEDIR]'
+      echo '    [--static] [--64] [--libdir=LIBDIR] [--sharedlibdir=LIBDIR]'
+      echo '    [--includedir=INCLUDEDIR] [--archs="-arch i386 -arch x86_64"]'
         exit 0 ;;
-    -p*=* | --prefix=*) prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift ;;
+    -p*=* | --prefix=*) prefix=`echo $1 | sed 's/.*=//'`; shift ;;
-    -e*=* | --eprefix=*) exec_prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift ;;
+    -e*=* | --eprefix=*) exec_prefix=`echo $1 | sed 's/.*=//'`; shift ;;
-    -l*=* | --libdir=*) libdir=`echo $1 | sed 's/[-a-z_]*=//'`; shift ;;
+    -l*=* | --libdir=*) libdir=`echo $1 | sed 's/.*=//'`; shift ;;
-    -i*=* | --includedir=*) includedir=`echo $1 | sed 's/[-a-z_]*=//'`;shift ;;
+    --sharedlibdir=*) sharedlibdir=`echo $1 | sed 's/.*=//'`; shift ;;
-    -u*=* | --uname=*) uname=`echo $1 | sed 's/[-a-z_]*=//'`;shift ;;
+    -i*=* | --includedir=*) includedir=`echo $1 | sed 's/.*=//'`;shift ;;
+    -u*=* | --uname=*) uname=`echo $1 | sed 's/.*=//'`;shift ;;
     -p* | --prefix) prefix="$2"; shift; shift ;;
     -e* | --eprefix) exec_prefix="$2"; shift; shift ;;
     -l* | --libdir) libdir="$2"; shift; shift ;;
     -i* | --includedir) includedir="$2"; shift; shift ;;
     -s* | --shared | --enable-shared) shared=1; shift ;;
     -t | --static) shared=0; shift ;;
+    --solo) solo=1; shift ;;
+    --cover) cover=1; shift ;;
     -z* | --zprefix) zprefix=1; shift ;;
     -6* | --64) build64=1; shift ;;
+    -a*=* | --archs=*) ARCHS=`echo $1 | sed 's/.*=//'`; shift ;;
     --sysconfdir=*) echo "ignored option: --sysconfdir"; shift ;;
     --localstatedir=*) echo "ignored option: --localstatedir"; shift ;;
     *) echo "unknown option: $1"; echo "$0 --help for help"; exit 1 ;;
@@ -68,18 +102,22 @@ extern int getchar();
 int hello() {return getchar();}
 EOF
 
-test -z "$CC" && echo Checking for gcc...
+test -z "$CC" && echo Checking for ${CROSS_PREFIX}gcc...
-cc=${CC-gcc}
+cc=${CC-${CROSS_PREFIX}gcc}
 cflags=${CFLAGS-"-O3"}
 # to force the asm version use: CFLAGS="-O3 -DASMV" ./configure
 case "$cc" in
   *gcc*) gcc=1 ;;
 esac
+case `$cc -v 2>&1` in
+  *gcc*) gcc=1 ;;
+esac
 
 if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
   CC="$cc"
-  SFLAGS="${CFLAGS-"-O3"} -fPIC"
+  CFLAGS="${CFLAGS--O3} ${ARCHS}"
-  CFLAGS="${CFLAGS-"-O3"}"
+  SFLAGS="${CFLAGS--O3} -fPIC"
+  LDFLAGS="${LDFLAGS} ${ARCHS}"
   if test $build64 -eq 1; then
     CFLAGS="${CFLAGS} -m64"
     SFLAGS="${SFLAGS} -m64"
@@ -91,9 +129,18 @@ if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
     uname=`(uname -s || echo unknown) 2>/dev/null`
   fi
   case "$uname" in
-  Linux | linux | GNU | GNU/* | *BSD | DragonFly) LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map"} ;;
+  Linux* | linux* | GNU | GNU/* | *BSD | *bsd* | DragonFly | solaris*)
-  CYGWIN* | Cygwin* | cygwin* | OS/2* )
+        LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map"} ;;
-             EXE='.exe' ;;
+  CYGWIN* | Cygwin* | cygwin* | OS/2*)
+        EXE='.exe' ;;
+  MINGW* | mingw*)
+# temporary bypass
+        rm -f $test.[co] $test $test$shared_ext
+        echo "Please use win32/Makefile.gcc instead."
+        exit 1
+        LDSHARED=${LDSHARED-"$cc -shared"}
+        LDSHAREDLIBC=""
+        EXE='.exe' ;;
   QNX*)  # This is for QNX6. I suppose that the QNX rule below is for QNX2,QNX4
          # (alain.bonnefoy@icbt.com)
                  LDSHARED=${LDSHARED-"$cc -shared -Wl,-hlibz.so.1"} ;;
@@ -107,16 +154,20 @@ if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
                  shared_ext='.sl'
                  SHAREDLIB='libz.sl' ;;
          esac ;;
-  Darwin*)   shared_ext='.dylib'
+  Darwin* | darwin*)
+             shared_ext='.dylib'
              SHAREDLIB=libz$shared_ext
              SHAREDLIBV=libz.$VER$shared_ext
              SHAREDLIBM=libz.$VER1$shared_ext
-             LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER3"} ;;
+             LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER3"}
+             AR="libtool"
+             ARFLAGS="-o" ;;
   *)             LDSHARED=${LDSHARED-"$cc -shared"} ;;
   esac
 else
   # find system name and corresponding cc options
   CC=${CC-cc}
+  gcc=0
   if test -z "$uname"; then
     uname=`(uname -sr || echo unknown) 2>/dev/null`
   fi
@@ -147,11 +198,13 @@ else
              CFLAGS=${CFLAGS-"-4 -O"}
              LDSHARED=${LDSHARED-"cc"}
              RANLIB=${RANLIB-"true"}
-             AR_RC="cc -A" ;;
+             AR="cc"
+             ARFLAGS="-A" ;;
   SCO_SV\ 3.2*) SFLAGS=${CFLAGS-"-O3 -dy -KPIC "}
              CFLAGS=${CFLAGS-"-O3"}
              LDSHARED=${LDSHARED-"cc -dy -KPIC -G"} ;;
-  SunOS\ 5*) LDSHARED=${LDSHARED-"cc -G"}
+  SunOS\ 5* | solaris*)
+         LDSHARED=${LDSHARED-"cc -G"}
          case `(uname -m || echo unknown) 2>/dev/null` in
          i86*)
              SFLAGS=${CFLAGS-"-xpentium -fast -KPIC -R."}
@@ -267,12 +320,38 @@ else
   echo "Checking for unistd.h... No."
 fi
 
+cat > $test.c <<EOF
+#include <stdarg.h>
+int main() { return 0; }
+EOF
+if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+  sed < zconf.h "/^#ifdef HAVE_STDARG_H.* may be/s/def HAVE_STDARG_H\(.*\) may be/ 1\1 was/" > zconf.temp.h
+  mv zconf.temp.h zconf.h
+  echo "Checking for stdarg.h... Yes."
+else
+  echo "Checking for stdarg.h... No."
+fi
+
 if test $zprefix -eq 1; then
   sed < zconf.h "/#ifdef Z_PREFIX.* may be/s/def Z_PREFIX\(.*\) may be/ 1\1 was/" > zconf.temp.h
   mv zconf.temp.h zconf.h
   echo "Using z_ prefix on all symbols."
 fi
 
+if test $solo -eq 1; then
+  sed '/#define ZCONF_H/a\
+#define Z_SOLO
+
+' < zconf.h > zconf.temp.h
+  mv zconf.temp.h zconf.h
+OBJC='$(OBJZ)'
+PIC_OBJC='$(PIC_OBJZ)'
+fi
+
+if test $cover -eq 1; then
+  CFLAGS="${CFLAGS} -fprofile-arcs -ftest-coverage"
+fi
+
 cat > $test.c <<EOF
 #include <stdio.h>
 #include <stdarg.h>
@@ -311,7 +390,6 @@ int main()
   return (mytest("Hello%d\n", 1));
 }
 EOF
-
   if test "`($CC $CFLAGS -o $test $test.c) 2>&1`" = ""; then
     echo "Checking for vsnprintf() in stdio.h... Yes."
 
@@ -474,22 +552,32 @@ EOF
   fi
 fi
 
-cat >$test.c <<EOF
+if test "$gcc" -eq 1; then
-#include <errno.h>
+  cat > $test.c <<EOF
-int main() { return 0; }
+#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33)
+#  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
+#else
+#  define ZLIB_INTERNAL
+#endif
+int ZLIB_INTERNAL foo;
+int main()
+{
+  return 0;
+}
 EOF
-if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+  if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
-  echo "Checking for errno.h... Yes."
+    echo "Checking for attribute(visibility) support... Yes."
-else
+  else
-  echo "Checking for errno.h... No."
+    CFLAGS="$CFLAGS -DNO_VIZ"
-  CFLAGS="$CFLAGS -DNO_ERRNO_H"
+    SFLAGS="$SFLAGS -DNO_VIZ"
-  SFLAGS="$SFLAGS -DNO_ERRNO_H"
+    echo "Checking for attribute(visibility) support... No."
+  fi
 fi
 
 CPP=${CPP-"$CC -E"}
 case $CFLAGS in
   *ASMV*)
-    if test "`nm $test.o | grep _hello`" = ""; then
+    if test "`$NM $test.o | grep _hello`" = ""; then
       CPP="$CPP -DNO_UNDERLINE"
       echo Checking for underline in external names... No.
     else
@@ -497,7 +585,7 @@ case $CFLAGS in
     fi ;;
 esac
 
-rm -f $test.[co] $test $test$shared_ext
+rm -f $test.[co] $test $test$shared_ext $test.gcno
 
 # udpate Makefile
 sed < Makefile.in "
@@ -511,14 +599,20 @@ sed < Makefile.in "
 /^SHAREDLIB *=/s#=.*#=$SHAREDLIB#
 /^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV#
 /^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM#
-/^AR *=/s#=.*#=$AR_RC#
+/^AR *=/s#=.*#=$AR#
+/^ARFLAGS *=/s#=.*#=$ARFLAGS#
 /^RANLIB *=/s#=.*#=$RANLIB#
+/^LDCONFIG *=/s#=.*#=$LDCONFIG#
+/^LDSHAREDLIBC *=/s#=.*#=$LDSHAREDLIBC#
 /^EXE *=/s#=.*#=$EXE#
 /^prefix *=/s#=.*#=$prefix#
 /^exec_prefix *=/s#=.*#=$exec_prefix#
 /^libdir *=/s#=.*#=$libdir#
+/^sharedlibdir *=/s#=.*#=$sharedlibdir#
 /^includedir *=/s#=.*#=$includedir#
 /^mandir *=/s#=.*#=$mandir#
+/^OBJC *=/s#=.*#= $OBJC#
+/^PIC_OBJC *=/s#=.*#= $PIC_OBJC#
 /^all: */s#:.*#: $ALL#
 /^test: */s#:.*#: $TEST#
 " > Makefile
@@ -532,12 +626,14 @@ sed < zlib.pc.in "
 /^SHAREDLIB *=/s#=.*#=$SHAREDLIB#
 /^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV#
 /^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM#
-/^AR *=/s#=.*#=$AR_RC#
+/^AR *=/s#=.*#=$AR#
+/^ARFLAGS *=/s#=.*#=$ARFLAGS#
 /^RANLIB *=/s#=.*#=$RANLIB#
 /^EXE *=/s#=.*#=$EXE#
 /^prefix *=/s#=.*#=$prefix#
 /^exec_prefix *=/s#=.*#=$exec_prefix#
 /^libdir *=/s#=.*#=$libdir#
+/^sharedlibdir *=/s#=.*#=$sharedlibdir#
 /^includedir *=/s#=.*#=$includedir#
 /^mandir *=/s#=.*#=$mandir#
 /^LDFLAGS *=/s#=.*#=$LDFLAGS#

contrib/asm686/match.S

@@ -83,17 +83,25 @@
 .text
 
 /* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
+.cfi_sections	.debug_frame
 
 longest_match:
 
+.cfi_startproc
 /* Save registers that the compiler may be using, and adjust %esp to	*/
 /* make room for our stack frame.					*/
 
 		pushl	%ebp
+		.cfi_def_cfa_offset 8
+		.cfi_offset ebp, -8
 		pushl	%edi
+		.cfi_def_cfa_offset 12
 		pushl	%esi
+		.cfi_def_cfa_offset 16
 		pushl	%ebx
+		.cfi_def_cfa_offset 20
 		subl	$LocalVarsSize, %esp
+		.cfi_def_cfa_offset LocalVarsSize+20
 
 /* Retrieve the function arguments. %ecx will hold cur_match		*/
 /* throughout the entire function. %edx will hold the pointer to the	*/
@@ -336,8 +344,14 @@ LookaheadRet:
 /* Restore the stack and return from whence we came.			*/
 
 		addl	$LocalVarsSize, %esp
+		.cfi_def_cfa_offset 20
 		popl	%ebx
+		.cfi_def_cfa_offset 16
 		popl	%esi
+		.cfi_def_cfa_offset 12
 		popl	%edi
+		.cfi_def_cfa_offset 8
 		popl	%ebp
+		.cfi_def_cfa_offset 4
+.cfi_endproc
 match_init:	ret

contrib/delphi/ZLib.pas

@@ -152,7 +152,7 @@ procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
   const OutBuf: Pointer; BufSize: Integer);
 
 const
-  zlib_version = '1.2.4';
+  zlib_version = '1.2.5.2';
 
 type
   EZlibError = class(Exception);

contrib/delphi/zlibd32.mak

@@ -63,9 +63,9 @@ uncompr.obj: uncompr.c zlib.h zconf.h
 
 zutil.obj: zutil.c zutil.h zlib.h zconf.h
 
-example.obj: example.c zlib.h zconf.h
+example.obj: test/example.c zlib.h zconf.h
 
-minigzip.obj: minigzip.c zlib.h zconf.h
+minigzip.obj: test/minigzip.c zlib.h zconf.h
 
 
 # For the sake of the old Borland make,

contrib/dotzlib/DotZLib/UnitTests.cs

@@ -156,7 +156,7 @@ namespace DotZLibTests
         public void Info_Version()
         {
             Info info = new Info();
-            Assert.AreEqual("1.2.4", Info.Version);
+            Assert.AreEqual("1.2.5.2", Info.Version);
             Assert.AreEqual(32, info.SizeOfUInt);
             Assert.AreEqual(32, info.SizeOfULong);
             Assert.AreEqual(32, info.SizeOfPointer);

contrib/infback9/inftree9.c

@@ -1,5 +1,5 @@
 /* inftree9.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2010 Mark Adler
+ * Copyright (C) 1995-2011 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate9_copyright[] =
-   " inflate9 1.2.4 Copyright 1995-2010 Mark Adler ";
+   " inflate9 1.2.5.2 Copyright 1995-2011 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -64,7 +64,7 @@ unsigned short FAR *work;
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
         130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
-        133, 133, 133, 133, 144, 198, 71};
+        133, 133, 133, 133, 144, 202, 194};
     static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
         65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,

contrib/masmx64/readme.txt

@@ -12,7 +12,10 @@ inffasx64.asm and inffas8664.c were written by Chris Anderson, by optimizing
 
 Use instructions
 ----------------
-Copy these files into the zlib source directory.
+Assemble the .asm files using MASM and put the object files into the zlib source
+directory.  You can also get object files here:
+
+     http://www.winimage.com/zLibDll/zlib124_masm_obj.zip
 
 define ASMV and ASMINF in your project. Include inffas8664.c in your source tree,
 and inffasx64.obj and gvmat64.obj as object to link.

contrib/masmx86/inffas32.asm

@@ -73,11 +73,6 @@ inflate_fast_use_mmx:
 
 
 _TEXT			segment
-PUBLIC _inflate_fast
-
-ALIGN 4
-_inflate_fast:
-	jmp inflate_fast_entry
 
 
 
@@ -163,7 +158,8 @@ distbits_state	 equ	(76+4+zlib1222sup)	;/* state->distbits */
 ;SECTION .text
 
 ALIGN 4
-inflate_fast_entry:
+_inflate_fast proc near
+.FPO (16, 4, 0, 0, 1, 0)
 	push  edi
 	push  esi
 	push  ebp
@@ -1078,6 +1074,7 @@ L_done:
 	pop  esi
 	pop  edi
 	ret
+_inflate_fast endp
 
 _TEXT	ends
 end

contrib/masmx86/match686.asm

@@ -195,6 +195,7 @@ dsNiceMatch equ 136+zlib1222add
     ELSE
     _longest_match      proc near
     ENDIF
+.FPO (9, 4, 0, 0, 1, 0)
 
 ;;; Save registers that the compiler may be using, and adjust esp to
 ;;; make room for our stack frame.

contrib/masmx86/readme.txt

@@ -7,9 +7,15 @@ longest_match() and inflate_fast().
 
 Use instructions
 ----------------
-Copy these files into the zlib source directory, then run the
+Assemble using MASM, and copy the object files into the zlib source
-appropriate makefile, as suggested below.
+directory, then run the appropriate makefile, as suggested below.  You can
+donwload MASM from here:
 
+    http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=7a1c9da0-0510-44a2-b042-7ef370530c64
+
+You can also get objects files here:
+
+    http://www.winimage.com/zLibDll/zlib124_masm_obj.zip
 
 Build instructions
 ------------------

contrib/minizip/Makefile.am

@@ -0,0 +1,28 @@
+lib_LTLIBRARIES = libminizip.la
+
+libminizip_la_SOURCES = \
+	ioapi.c \
+	mztools.c \
+	unzip.c \
+	zip.c
+
+libminizip_la_CFLAGS = -I../.. -L../..
+libminizip_la_LDFLAGS = -version-info 1:0:0 -lz
+
+minizip_includedir = $(includedir)/minizip
+minizip_include_HEADERS = \
+	crypt.h \
+	ioapi.h \
+	mztools.h \
+	unzip.h \
+	zip.h
+
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = minizip.pc
+
+EXTRA_PROGRAMS = miniunzip minizip
+
+miniunzip_SOURCES = miniunz.c
+miniunzip_LDADD = libminizip.la
+
+minizip_SOURCES = minizip.c

contrib/minizip/configure.ac

@@ -0,0 +1,12 @@
+#                                               -*- Autoconf -*-
+# Process this file with autoconf to produce a configure script.
+
+AC_INIT([minizip], [@ZLIB_VER@], [bugzilla.redhat.com])
+AC_CONFIG_SRCDIR([minigzip.c])
+AM_INIT_AUTOMAKE([foreign])
+LT_INIT
+
+AC_SUBST([HAVE_UNISTD_H], [0])
+AC_CHECK_HEADER([unistd.h], [HAVE_UNISTD_H=1], [])
+AC_CONFIG_FILES([Makefile minizip.pc])
+AC_OUTPUT

contrib/minizip/ioapi.c

@@ -14,6 +14,18 @@
         #define _CRT_SECURE_NO_WARNINGS
 #endif
 
+#ifdef __APPLE__
+// In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions
+#define FOPEN_FUNC(filename, mode) fopen(filename, mode)
+#define FTELLO_FUNC(stream) ftello(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko(stream, offset, origin)
+#else
+#define FOPEN_FUNC(filename, mode) fopen64(filename, mode)
+#define FTELLO_FUNC(stream) ftello64(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko64(stream, offset, origin)
+#endif
+
+
 #include "ioapi.h"
 
 voidpf call_zopen64 (const zlib_filefunc64_32_def* pfilefunc,const void*filename,int mode)
@@ -112,7 +124,7 @@ static voidpf ZCALLBACK fopen64_file_func (voidpf opaque, const void* filename,
         mode_fopen = "wb";
 
     if ((filename!=NULL) && (mode_fopen != NULL))
-        file = fopen64((const char*)filename, mode_fopen);
+        file = FOPEN_FUNC((const char*)filename, mode_fopen);
     return file;
 }
 
@@ -142,7 +154,7 @@ static long ZCALLBACK ftell_file_func (voidpf opaque, voidpf stream)
 static ZPOS64_T ZCALLBACK ftell64_file_func (voidpf opaque, voidpf stream)
 {
     ZPOS64_T ret;
-    ret = ftello64((FILE *)stream);
+    ret = FTELLO_FUNC((FILE *)stream);
     return ret;
 }
 
@@ -188,7 +200,7 @@ static long ZCALLBACK fseek64_file_func (voidpf  opaque, voidpf stream, ZPOS64_T
     }
     ret = 0;
 
-    if(fseeko64((FILE *)stream, offset, fseek_origin) != 0)
+    if(FSEEKO_FUNC((FILE *)stream, offset, fseek_origin) != 0)
                         ret = -1;
 
     return ret;

contrib/minizip/ioapi.h

@@ -21,7 +21,7 @@
 #ifndef _ZLIBIOAPI64_H
 #define _ZLIBIOAPI64_H
 
-#if (!defined(_WIN32)) && (!defined(WIN32))
+#if (!defined(_WIN32)) && (!defined(WIN32)) && (!defined(__APPLE__))
 
   // Linux needs this to support file operation on files larger then 4+GB
   // But might need better if/def to select just the platforms that needs them.
@@ -38,6 +38,7 @@
         #ifndef _FILE_OFFSET_BIT
                 #define _FILE_OFFSET_BIT 64
         #endif
+
 #endif
 
 #include <stdio.h>

contrib/minizip/miniunz.c

@@ -12,7 +12,7 @@
          Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
 */
 
-#ifndef _WIN32
+#if (!defined(_WIN32)) && (!defined(WIN32)) && (!defined(__APPLE__))
         #ifndef __USE_FILE_OFFSET64
                 #define __USE_FILE_OFFSET64
         #endif
@@ -27,6 +27,18 @@
         #endif
 #endif
 
+#ifdef __APPLE__
+// In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions
+#define FOPEN_FUNC(filename, mode) fopen(filename, mode)
+#define FTELLO_FUNC(stream) ftello(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko(stream, offset, origin)
+#else
+#define FOPEN_FUNC(filename, mode) fopen64(filename, mode)
+#define FTELLO_FUNC(stream) ftello64(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko64(stream, offset, origin)
+#endif
+
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -34,14 +46,15 @@
 #include <errno.h>
 #include <fcntl.h>
 
-#ifdef unix
+#ifdef _WIN32
-# include <unistd.h>
-# include <utime.h>
-#else
 # include <direct.h>
 # include <io.h>
+#else
+# include <unistd.h>
+# include <utime.h>
 #endif
 
+
 #include "unzip.h"
 
 #define CASESENSITIVITY (0)
@@ -84,7 +97,7 @@ void change_file_date(filename,dosdate,tmu_date)
   SetFileTime(hFile,&ftm,&ftLastAcc,&ftm);
   CloseHandle(hFile);
 #else
-#ifdef unix
+#ifdef unix || __APPLE__
   struct utimbuf ut;
   struct tm newdate;
   newdate.tm_sec = tmu_date.tm_sec;
@@ -114,10 +127,10 @@ int mymkdir(dirname)
     int ret=0;
 #ifdef _WIN32
     ret = _mkdir(dirname);
-#else
+#elif unix
-#ifdef unix
+    ret = mkdir (dirname,0775);
+#elif __APPLE__
     ret = mkdir (dirname,0775);
-#endif
 #endif
     return ret;
 }
@@ -364,7 +377,7 @@ int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
         {
             char rep=0;
             FILE* ftestexist;
-            ftestexist = fopen64(write_filename,"rb");
+            ftestexist = FOPEN_FUNC(write_filename,"rb");
             if (ftestexist!=NULL)
             {
                 fclose(ftestexist);
@@ -395,8 +408,7 @@ int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
 
         if ((skip==0) && (err==UNZ_OK))
         {
-            fout=fopen64(write_filename,"wb");
+            fout=FOPEN_FUNC(write_filename,"wb");
-
             /* some zipfile don't contain directory alone before file */
             if ((fout==NULL) && ((*popt_extract_without_path)==0) &&
                                 (filename_withoutpath!=(char*)filename_inzip))
@@ -405,7 +417,7 @@ int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
                 *(filename_withoutpath-1)='\0';
                 makedir(write_filename);
                 *(filename_withoutpath-1)=c;
-                fout=fopen64(write_filename,"wb");
+                fout=FOPEN_FUNC(write_filename,"wb");
             }
 
             if (fout==NULL)

contrib/minizip/minizip.c

@@ -13,7 +13,7 @@
 */
 
 
-#ifndef _WIN32
+#if (!defined(_WIN32)) && (!defined(WIN32)) && (!defined(__APPLE__))
         #ifndef __USE_FILE_OFFSET64
                 #define __USE_FILE_OFFSET64
         #endif
@@ -28,6 +28,19 @@
         #endif
 #endif
 
+#ifdef __APPLE__
+// In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions
+#define FOPEN_FUNC(filename, mode) fopen(filename, mode)
+#define FTELLO_FUNC(stream) ftello(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko(stream, offset, origin)
+#else
+#define FOPEN_FUNC(filename, mode) fopen64(filename, mode)
+#define FTELLO_FUNC(stream) ftello64(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko64(stream, offset, origin)
+#endif
+
+
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -35,14 +48,14 @@
 #include <errno.h>
 #include <fcntl.h>
 
-#ifdef unix
+#ifdef _WIN32
+# include <direct.h>
+# include <io.h>
+#else
 # include <unistd.h>
 # include <utime.h>
 # include <sys/types.h>
 # include <sys/stat.h>
-#else
-# include <direct.h>
-# include <io.h>
 #endif
 
 #include "zip.h"
@@ -81,7 +94,7 @@ uLong filetime(f, tmzip, dt)
   return ret;
 }
 #else
-#ifdef unix
+#ifdef unix || __APPLE__
 uLong filetime(f, tmzip, dt)
     char *f;               /* name of file to get info on */
     tm_zip *tmzip;         /* return value: access, modific. and creation times */
@@ -142,7 +155,7 @@ int check_exist_file(filename)
 {
     FILE* ftestexist;
     int ret = 1;
-    ftestexist = fopen64(filename,"rb");
+    ftestexist = FOPEN_FUNC(filename,"rb");
     if (ftestexist==NULL)
         ret = 0;
     else
@@ -173,7 +186,8 @@ int getFileCrc(const char* filenameinzip,void*buf,unsigned long size_buf,unsigne
 {
    unsigned long calculate_crc=0;
    int err=ZIP_OK;
-   FILE * fin = fopen64(filenameinzip,"rb");
+   FILE * fin = FOPEN_FUNC(filenameinzip,"rb");
+   
    unsigned long size_read = 0;
    unsigned long total_read = 0;
    if (fin==NULL)
@@ -211,13 +225,12 @@ int isLargeFile(const char* filename)
 {
   int largeFile = 0;
   ZPOS64_T pos = 0;
-  FILE* pFile = fopen64(filename, "rb");
+  FILE* pFile = FOPEN_FUNC(filename, "rb");
 
   if(pFile != NULL)
   {
-    int n = fseeko64(pFile, 0, SEEK_END);
+    int n = FSEEKO_FUNC(pFile, 0, SEEK_END);
-
+    pos = FTELLO_FUNC(pFile);
-    pos = ftello64(pFile);
 
                 printf("File : %s is %lld bytes\n", filename, pos);
 
@@ -447,7 +460,7 @@ int main(argc,argv)
                     printf("error in opening %s in zipfile\n",filenameinzip);
                 else
                 {
-                    fin = fopen64(filenameinzip,"rb");
+                    fin = FOPEN_FUNC(filenameinzip,"rb");
                     if (fin==NULL)
                     {
                         err=ZIP_ERRNO;

contrib/minizip/minizip.pc.in

@@ -0,0 +1,12 @@
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+libdir=@libdir@
+includedir=@includedir@/minizip
+
+Name: minizip
+Description: Minizip zip file manipulation library
+Requires:
+Version: @PACKAGE_VERSION@
+Libs: -L${libdir} -lminizip
+Libs.private: -lz
+Cflags: -I${includedir}

contrib/minizip/unzip.c

@@ -1145,7 +1145,7 @@ extern int ZEXPORT unzGetCurrentFileInfo (unzFile file,
                                                 szFileName,fileNameBufferSize,
                                                 extraField,extraFieldBufferSize,
                                                 szComment,commentBufferSize);
-    if (err==UNZ_OK)
+    if ((err==UNZ_OK) && (pfile_info != NULL))
     {
         pfile_info->version = file_info64.version;
         pfile_info->version_needed = file_info64.version_needed;

contrib/pascal/zlibd32.mak

@@ -63,9 +63,9 @@ uncompr.obj: uncompr.c zlib.h zconf.h
 
 zutil.obj: zutil.c zutil.h zlib.h zconf.h
 
-example.obj: example.c zlib.h zconf.h
+example.obj: test/example.c zlib.h zconf.h
 
-minigzip.obj: minigzip.c zlib.h zconf.h
+minigzip.obj: test/minigzip.c zlib.h zconf.h
 
 
 # For the sake of the old Borland make,

contrib/pascal/zlibpas.pas

@@ -10,7 +10,7 @@ unit zlibpas;
 interface
 
 const
-  ZLIB_VERSION = '1.2.4';
+  ZLIB_VERSION = '1.2.5.2';
 
 type
   alloc_func = function(opaque: Pointer; items, size: Integer): Pointer;
@@ -97,6 +97,7 @@ function deflateCopy(var dest, source: z_stream): Integer;
 function deflateReset(var strm: z_stream): Integer;
 function deflateParams(var strm: z_stream; level, strategy: Integer): Integer;
 function deflateBound(var strm: z_stream; sourceLen: LongInt): LongInt;
+function deflatePending(var strm: z_stream; var pending: Integer; var bits: Integer): Integer;
 function deflatePrime(var strm: z_stream; bits, value: Integer): Integer;
 function inflateInit2(var strm: z_stream; windowBits: Integer): Integer;
 function inflateSetDictionary(var strm: z_stream; const dictionary: PChar;
@@ -166,6 +167,7 @@ function deflateEnd; external;
 function deflateInit_; external;
 function deflateInit2_; external;
 function deflateParams; external;
+function deflatePending; external;
 function deflatePrime; external;
 function deflateReset; external;
 function deflateSetDictionary; external;

contrib/puff/Makefile

@@ -1,8 +1,42 @@
-puff: puff.c puff.h
+CFLAGS=-O
-	cc -DTEST -o puff puff.c
+
+puff: puff.o pufftest.o
+
+puff.o: puff.h
+
+pufftest.o: puff.h
 
 test: puff
 	puff zeros.raw
 
+puft: puff.c puff.h pufftest.o
+	cc -fprofile-arcs -ftest-coverage -o puft puff.c pufftest.o
+
+# puff full coverage test (should say 100%)
+cov: puft
+	@rm -f *.gcov *.gcda
+	@puft -w zeros.raw 2>&1 | cat > /dev/null
+	@echo '04' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+	@echo '00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+	@echo '00 00 00 00 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 254
+	@echo '00 01 00 fe ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+	@echo '01 01 00 fe ff 0a' | xxd -r -p | puft -f 2>&1 | cat > /dev/null
+	@echo '02 7e ff ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 246
+	@echo '02' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+	@echo '04 80 49 92 24 49 92 24 0f b4 ff ff c3 04' | xxd -r -p | puft 2> /dev/null || test $$? -eq 2
+	@echo '04 80 49 92 24 49 92 24 71 ff ff 93 11 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 249
+	@echo '04 c0 81 08 00 00 00 00 20 7f eb 0b 00 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 246
+	@echo '0b 00 00' | xxd -r -p | puft -f 2>&1 | cat > /dev/null
+	@echo '1a 07' | xxd -r -p | puft 2> /dev/null || test $$? -eq 246
+	@echo '0c c0 81 00 00 00 00 00 90 ff 6b 04' | xxd -r -p | puft 2> /dev/null || test $$? -eq 245
+	@puft -f zeros.raw 2>&1 | cat > /dev/null
+	@echo 'fc 00 00' | xxd -r -p | puft 2> /dev/null || test $$? -eq 253
+	@echo '04 00 fe ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 252
+	@echo '04 00 24 49' | xxd -r -p | puft 2> /dev/null || test $$? -eq 251
+	@echo '04 80 49 92 24 49 92 24 0f b4 ff ff c3 84' | xxd -r -p | puft 2> /dev/null || test $$? -eq 248
+	@echo '04 00 24 e9 ff ff' | xxd -r -p | puft 2> /dev/null || test $$? -eq 250
+	@echo '04 00 24 e9 ff 6d' | xxd -r -p | puft 2> /dev/null || test $$? -eq 247
+	@gcov -n puff.c
+
 clean:
-	rm -f puff puff.o
+	rm -f puff puft *.o *.gc*

contrib/puff/puff.c

@@ -1,8 +1,8 @@
 /*
  * puff.c
- * Copyright (C) 2002-2008 Mark Adler
+ * Copyright (C) 2002-2010 Mark Adler
  * For conditions of distribution and use, see copyright notice in puff.h
- * version 2.0, 25 Jul 2008
+ * version 2.2, 25 Apr 2010
  *
  * puff.c is a simple inflate written to be an unambiguous way to specify the
  * deflate format.  It is not written for speed but rather simplicity.  As a
@@ -49,9 +49,9 @@
  *                      - Fix fixed codes table error
  *                      - Provide a scanning mode for determining size of
  *                        uncompressed data
- * 1.3  20 Mar 2002     - Go back to lengths for puff() parameters [Jean-loup]
+ * 1.3  20 Mar 2002     - Go back to lengths for puff() parameters [Gailly]
  *                      - Add a puff.h file for the interface
- *                      - Add braces in puff() for else do [Jean-loup]
+ *                      - Add braces in puff() for else do [Gailly]
  *                      - Use indexes instead of pointers for readability
  * 1.4  31 Mar 2002     - Simplify construct() code set check
  *                      - Fix some comments
@@ -67,13 +67,21 @@
  *                      - Add option in TEST code for puff to write the data
  *                      - Add option in TEST code to skip input bytes
  *                      - Allow TEST code to read from piped stdin
+ * 2.1   4 Apr 2010     - Avoid variable initialization for happier compilers
+ *                      - Avoid unsigned comparisons for even happier compilers
+ * 2.2  25 Apr 2010     - Fix bug in variable initializations [Oberhumer]
+ *                      - Add const where appropriate [Oberhumer]
+ *                      - Split if's and ?'s for coverage testing
+ *                      - Break out test code to separate file
+ *                      - Move NIL to puff.h
+ *                      - Allow incomplete code only if single code length is 1
+ *                      - Add full code coverage test to Makefile
  */
 
 #include <setjmp.h>             /* for setjmp(), longjmp(), and jmp_buf */
 #include "puff.h"               /* prototype for puff() */
 
 #define local static            /* for local function definitions */
-#define NIL ((unsigned char *)0)        /* for no output option */
 
 /*
  * Maximums for allocations and loops.  It is not useful to change these --
@@ -93,7 +101,7 @@ struct state {
     unsigned long outcnt;       /* bytes written to out so far */
 
     /* input state */
-    unsigned char *in;          /* input buffer */
+    const unsigned char *in;    /* input buffer */
     unsigned long inlen;        /* available input at in */
     unsigned long incnt;        /* bytes read so far */
     int bitbuf;                 /* bit buffer */
@@ -121,7 +129,8 @@ local int bits(struct state *s, int need)
     /* load at least need bits into val */
     val = s->bitbuf;
     while (s->bitcnt < need) {
-        if (s->incnt == s->inlen) longjmp(s->env, 1);   /* out of input */
+        if (s->incnt == s->inlen)
+            longjmp(s->env, 1);         /* out of input */
         val |= (long)(s->in[s->incnt++]) << s->bitcnt;  /* load eight bits */
         s->bitcnt += 8;
     }
@@ -160,7 +169,8 @@ local int stored(struct state *s)
     s->bitcnt = 0;
 
     /* get length and check against its one's complement */
-    if (s->incnt + 4 > s->inlen) return 2;      /* not enough input */
+    if (s->incnt + 4 > s->inlen)
+        return 2;                               /* not enough input */
     len = s->in[s->incnt++];
     len |= s->in[s->incnt++] << 8;
     if (s->in[s->incnt++] != (~len & 0xff) ||
@@ -168,7 +178,8 @@ local int stored(struct state *s)
         return -2;                              /* didn't match complement! */
 
     /* copy len bytes from in to out */
-    if (s->incnt + len > s->inlen) return 2;    /* not enough input */
+    if (s->incnt + len > s->inlen)
+        return 2;                               /* not enough input */
     if (s->out != NIL) {
         if (s->outcnt + len > s->outlen)
             return 1;                           /* not enough output space */
@@ -220,7 +231,7 @@ struct huffman {
  *   in the deflate format.  See the format notes for fixed() and dynamic().
  */
 #ifdef SLOW
-local int decode(struct state *s, struct huffman *h)
+local int decode(struct state *s, const struct huffman *h)
 {
     int len;            /* current number of bits in code */
     int code;           /* len bits being decoded */
@@ -248,7 +259,7 @@ local int decode(struct state *s, struct huffman *h)
  * a few percent larger.
  */
 #else /* !SLOW */
-local int decode(struct state *s, struct huffman *h)
+local int decode(struct state *s, const struct huffman *h)
 {
     int len;            /* current number of bits in code */
     int code;           /* len bits being decoded */
@@ -281,10 +292,13 @@ local int decode(struct state *s, struct huffman *h)
             len++;
         }
         left = (MAXBITS+1) - len;
-        if (left == 0) break;
+        if (left == 0)
-        if (s->incnt == s->inlen) longjmp(s->env, 1);   /* out of input */
+            break;
+        if (s->incnt == s->inlen)
+            longjmp(s->env, 1);         /* out of input */
         bitbuf = s->in[s->incnt++];
-        if (left > 8) left = 8;
+        if (left > 8)
+            left = 8;
     }
     return -10;                         /* ran out of codes */
 }
@@ -322,7 +336,7 @@ local int decode(struct state *s, struct huffman *h)
  * - Within a given code length, the symbols are kept in ascending order for
  *   the code bits definition.
  */
-local int construct(struct huffman *h, short *length, int n)
+local int construct(struct huffman *h, const short *length, int n)
 {
     int symbol;         /* current symbol when stepping through length[] */
     int len;            /* current length when stepping through h->count[] */
@@ -342,7 +356,8 @@ local int construct(struct huffman *h, short *length, int n)
     for (len = 1; len <= MAXBITS; len++) {
         left <<= 1;                     /* one more bit, double codes left */
         left -= h->count[len];          /* deduct count from possible codes */
-        if (left < 0) return left;      /* over-subscribed--return negative */
+        if (left < 0)
+            return left;                /* over-subscribed--return negative */
     }                                   /* left > 0 means incomplete */
 
     /* generate offsets into symbol table for each length for sorting */
@@ -418,8 +433,8 @@ local int construct(struct huffman *h, short *length, int n)
  *   defined to do the wrong thing in this case.
  */
 local int codes(struct state *s,
-                struct huffman *lencode,
+                const struct huffman *lencode,
-                struct huffman *distcode)
+                const struct huffman *distcode)
 {
     int symbol;         /* decoded symbol */
     int len;            /* length for copy */
@@ -442,11 +457,13 @@ local int codes(struct state *s,
     /* decode literals and length/distance pairs */
     do {
         symbol = decode(s, lencode);
-        if (symbol < 0) return symbol;  /* invalid symbol */
+        if (symbol < 0)
+            return symbol;              /* invalid symbol */
         if (symbol < 256) {             /* literal: symbol is the byte */
             /* write out the literal */
             if (s->out != NIL) {
-                if (s->outcnt == s->outlen) return 1;
+                if (s->outcnt == s->outlen)
+                    return 1;
                 s->out[s->outcnt] = symbol;
             }
             s->outcnt++;
@@ -454,12 +471,14 @@ local int codes(struct state *s,
         else if (symbol > 256) {        /* length */
             /* get and compute length */
             symbol -= 257;
-            if (symbol >= 29) return -10;       /* invalid fixed code */
+            if (symbol >= 29)
+                return -10;             /* invalid fixed code */
             len = lens[symbol] + bits(s, lext[symbol]);
 
             /* get and check distance */
             symbol = decode(s, distcode);
-            if (symbol < 0) return symbol;      /* invalid symbol */
+            if (symbol < 0)
+                return symbol;          /* invalid symbol */
             dist = dists[symbol] + bits(s, dext[symbol]);
 #ifndef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
             if (dist > s->outcnt)
@@ -468,13 +487,15 @@ local int codes(struct state *s,
 
             /* copy length bytes from distance bytes back */
             if (s->out != NIL) {
-                if (s->outcnt + len > s->outlen) return 1;
+                if (s->outcnt + len > s->outlen)
+                    return 1;
                 while (len--) {
                     s->out[s->outcnt] =
 #ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
-                        dist > s->outcnt ? 0 :
+                        dist > s->outcnt ?
+                            0 :
 #endif
-                        s->out[s->outcnt - dist];
+                            s->out[s->outcnt - dist];
                     s->outcnt++;
                 }
             }
@@ -516,14 +537,19 @@ local int fixed(struct state *s)
     static int virgin = 1;
     static short lencnt[MAXBITS+1], lensym[FIXLCODES];
     static short distcnt[MAXBITS+1], distsym[MAXDCODES];
-    static struct huffman lencode = {lencnt, lensym};
+    static struct huffman lencode, distcode;
-    static struct huffman distcode = {distcnt, distsym};
 
     /* build fixed huffman tables if first call (may not be thread safe) */
     if (virgin) {
         int symbol;
         short lengths[FIXLCODES];
 
+        /* construct lencode and distcode */
+        lencode.count = lencnt;
+        lencode.symbol = lensym;
+        distcode.count = distcnt;
+        distcode.symbol = distsym;
+
         /* literal/length table */
         for (symbol = 0; symbol < 144; symbol++)
             lengths[symbol] = 8;
@@ -643,11 +669,16 @@ local int dynamic(struct state *s)
     short lengths[MAXCODES];            /* descriptor code lengths */
     short lencnt[MAXBITS+1], lensym[MAXLCODES];         /* lencode memory */
     short distcnt[MAXBITS+1], distsym[MAXDCODES];       /* distcode memory */
-    struct huffman lencode = {lencnt, lensym};          /* length code */
+    struct huffman lencode, distcode;   /* length and distance codes */
-    struct huffman distcode = {distcnt, distsym};       /* distance code */
     static const short order[19] =      /* permutation of code length codes */
         {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
 
+    /* construct lencode and distcode */
+    lencode.count = lencnt;
+    lencode.symbol = lensym;
+    distcode.count = distcnt;
+    distcode.symbol = distsym;
+
     /* get number of lengths in each table, check lengths */
     nlen = bits(s, 5) + 257;
     ndist = bits(s, 5) + 1;
@@ -663,7 +694,8 @@ local int dynamic(struct state *s)
 
     /* build huffman table for code lengths codes (use lencode temporarily) */
     err = construct(&lencode, lengths, 19);
-    if (err != 0) return -4;            /* require complete code set here */
+    if (err != 0)               /* require complete code set here */
+        return -4;
 
     /* read length/literal and distance code length tables */
     index = 0;
@@ -677,7 +709,8 @@ local int dynamic(struct state *s)
         else {                          /* repeat instruction */
             len = 0;                    /* assume repeating zeros */
             if (symbol == 16) {         /* repeat last length 3..6 times */
-                if (index == 0) return -5;      /* no last length! */
+                if (index == 0)
+                    return -5;          /* no last length! */
                 len = lengths[index - 1];       /* last length */
                 symbol = 3 + bits(s, 2);
             }
@@ -698,13 +731,13 @@ local int dynamic(struct state *s)
 
     /* build huffman table for literal/length codes */
     err = construct(&lencode, lengths, nlen);
-    if (err < 0 || (err > 0 && nlen - lencode.count[0] != 1))
+    if (err && (err < 0 || nlen != lencode.count[0] + lencode.count[1]))
-        return -7;      /* only allow incomplete codes if just one code */
+        return -7;      /* incomplete code ok only for single length 1 code */
 
     /* build huffman table for distance codes */
     err = construct(&distcode, lengths + nlen, ndist);
-    if (err < 0 || (err > 0 && ndist - distcode.count[0] != 1))
+    if (err && (err < 0 || ndist != distcode.count[0] + distcode.count[1]))
-        return -8;      /* only allow incomplete codes if just one code */
+        return -8;      /* incomplete code ok only for single length 1 code */
 
     /* decode data until end-of-block code */
     return codes(s, &lencode, &distcode);
@@ -756,7 +789,7 @@ local int dynamic(struct state *s)
  */
 int puff(unsigned char *dest,           /* pointer to destination pointer */
          unsigned long *destlen,        /* amount of output space */
-         unsigned char *source,         /* pointer to source data pointer */
+         const unsigned char *source,   /* pointer to source data pointer */
          unsigned long *sourcelen)      /* amount of input available */
 {
     struct state s;             /* input/output state */
@@ -783,11 +816,15 @@ int puff(unsigned char *dest,           /* pointer to destination pointer */
         do {
             last = bits(&s, 1);         /* one if last block */
             type = bits(&s, 2);         /* block type 0..3 */
-            err = type == 0 ? stored(&s) :
+            err = type == 0 ?
-                  (type == 1 ? fixed(&s) :
+                    stored(&s) :
-                   (type == 2 ? dynamic(&s) :
+                    (type == 1 ?
-                    -1));               /* type == 3, invalid */
+                        fixed(&s) :
-            if (err != 0) break;        /* return with error */
+                        (type == 2 ?
+                            dynamic(&s) :
+                            -1));       /* type == 3, invalid */
+            if (err != 0)
+                break;                  /* return with error */
         } while (!last);
     }
 
@@ -798,145 +835,3 @@ int puff(unsigned char *dest,           /* pointer to destination pointer */
     }
     return err;
 }
-
-#ifdef TEST
-/* Examples of how to use puff().
-
-   Usage: puff [-w] [-nnn] file
-          ... | puff [-w] [-nnn]
-
-   where file is the input file with deflate data, nnn is the number of bytes
-   of input to skip before inflating (e.g. to skip a zlib or gzip header), and
-   -w is used to write the decompressed data to stdout */
-
-#include <stdio.h>
-#include <stdlib.h>
-
-/* Return size times approximately the cube root of 2, keeping the result as 1,
-   3, or 5 times a power of 2 -- the result is always > size, until the result
-   is the maximum value of an unsigned long, where it remains.  This is useful
-   to keep reallocations less than ~33% over the actual data. */
-local size_t bythirds(size_t size)
-{
-    int n;
-    size_t m;
-
-    m = size;
-    for (n = 0; m; n++)
-        m >>= 1;
-    if (n < 3)
-        return size + 1;
-    n -= 3;
-    m = size >> n;
-    m += m == 6 ? 2 : 1;
-    m <<= n;
-    return m > size ? m : (size_t)(-1);
-}
-
-/* Read the input file *name, or stdin if name is NULL, into allocated memory.
-   Reallocate to larger buffers until the entire file is read in.  Return a
-   pointer to the allocated data, or NULL if there was a memory allocation
-   failure.  *len is the number of bytes of data read from the input file (even
-   if load() returns NULL).  If the input file was empty or could not be opened
-   or read, *len is zero. */
-local void *load(char *name, size_t *len)
-{
-    size_t size;
-    void *buf, *swap;
-    FILE *in;
-
-    *len = 0;
-    buf = malloc(size = 4096);
-    if (buf == NULL)
-        return NULL;
-    in = name == NULL ? stdin : fopen(name, "rb");
-    if (in != NULL) {
-        for (;;) {
-            *len += fread((char *)buf + *len, 1, size - *len, in);
-            if (*len < size) break;
-            size = bythirds(size);
-            if (size == *len || (swap = realloc(buf, size)) == NULL) {
-                free(buf);
-                buf = NULL;
-                break;
-            }
-            buf = swap;
-        }
-        fclose(in);
-    }
-    return buf;
-}
-
-int main(int argc, char **argv)
-{
-    int ret, skip = 0, put = 0;
-    char *arg, *name = NULL;
-    unsigned char *source = NULL, *dest;
-    size_t len = 0;
-    unsigned long sourcelen, destlen;
-
-    /* process arguments */
-    while (arg = *++argv, --argc)
-        if (arg[0] == '-') {
-            if (arg[1] == 'w' && arg[2] == 0)
-                put = 1;
-            else if (arg[1] >= '0' && arg[1] <= '9')
-                skip = atoi(arg + 1);
-            else {
-                fprintf(stderr, "invalid option %s\n", arg);
-                return 3;
-            }
-        }
-        else if (name != NULL) {
-            fprintf(stderr, "only one file name allowed\n");
-            return 3;
-        }
-        else
-            name = arg;
-    source = load(name, &len);
-    if (source == NULL) {
-        fprintf(stderr, "memory allocation failure\n");
-        return 4;
-    }
-    if (len == 0) {
-        fprintf(stderr, "could not read %s, or it was empty\n",
-                name == NULL ? "<stdin>" : name);
-        free(source);
-        return 3;
-    }
-    if (skip >= len) {
-        fprintf(stderr, "skip request of %d leaves no input\n", skip);
-        free(source);
-        return 3;
-    }
-
-    /* test inflate data with offset skip */
-    len -= skip;
-    sourcelen = (unsigned long)len;
-    ret = puff(NIL, &destlen, source + skip, &sourcelen);
-    if (ret)
-        fprintf(stderr, "puff() failed with return code %d\n", ret);
-    else {
-        fprintf(stderr, "puff() succeeded uncompressing %lu bytes\n", destlen);
-        if (sourcelen < len) fprintf(stderr, "%lu compressed bytes unused\n",
-                                     len - sourcelen);
-    }
-
-    /* if requested, inflate again and write decompressd data to stdout */
-    if (put) {
-        dest = malloc(destlen);
-        if (dest == NULL) {
-            fprintf(stderr, "memory allocation failure\n");
-            free(source);
-            return 4;
-        }
-        puff(dest, &destlen, source + skip, &sourcelen);
-        fwrite(dest, 1, destlen, stdout);
-        free(dest);
-    }
-
-    /* clean up */
-    free(source);
-    return ret;
-}
-#endif

contrib/puff/puff.h

@@ -1,6 +1,6 @@
 /* puff.h
-  Copyright (C) 2002-2008 Mark Adler, all rights reserved
+  Copyright (C) 2002-2010 Mark Adler, all rights reserved
-  version 1.9, 10 Jan 2008
+  version 2.2, 25 Apr 2010
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the author be held liable for any damages
@@ -25,7 +25,11 @@
 /*
  * See puff.c for purpose and usage.
  */
+#ifndef NIL
+#  define NIL ((unsigned char *)0)      /* for no output option */
+#endif
+
 int puff(unsigned char *dest,           /* pointer to destination pointer */
          unsigned long *destlen,        /* amount of output space */
-         unsigned char *source,         /* pointer to source data pointer */
+         const unsigned char *source,   /* pointer to source data pointer */
          unsigned long *sourcelen);     /* amount of input available */

contrib/puff/pufftest.c

@@ -0,0 +1,165 @@
+/*
+ * pufftest.c
+ * Copyright (C) 2002-2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in puff.h
+ * version 2.2, 25 Apr 2010
+ */
+
+/* Example of how to use puff().
+
+   Usage: puff [-w] [-f] [-nnn] file
+          ... | puff [-w] [-f] [-nnn]
+
+   where file is the input file with deflate data, nnn is the number of bytes
+   of input to skip before inflating (e.g. to skip a zlib or gzip header), and
+   -w is used to write the decompressed data to stdout.  -f is for coverage
+   testing, and causes pufftest to fail with not enough output space (-f does
+   a write like -w, so -w is not required). */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include "puff.h"
+
+#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
+#  include <fcntl.h>
+#  include <io.h>
+#  define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+#  define SET_BINARY_MODE(file)
+#endif
+
+#define local static
+
+/* Return size times approximately the cube root of 2, keeping the result as 1,
+   3, or 5 times a power of 2 -- the result is always > size, until the result
+   is the maximum value of an unsigned long, where it remains.  This is useful
+   to keep reallocations less than ~33% over the actual data. */
+local size_t bythirds(size_t size)
+{
+    int n;
+    size_t m;
+
+    m = size;
+    for (n = 0; m; n++)
+        m >>= 1;
+    if (n < 3)
+        return size + 1;
+    n -= 3;
+    m = size >> n;
+    m += m == 6 ? 2 : 1;
+    m <<= n;
+    return m > size ? m : (size_t)(-1);
+}
+
+/* Read the input file *name, or stdin if name is NULL, into allocated memory.
+   Reallocate to larger buffers until the entire file is read in.  Return a
+   pointer to the allocated data, or NULL if there was a memory allocation
+   failure.  *len is the number of bytes of data read from the input file (even
+   if load() returns NULL).  If the input file was empty or could not be opened
+   or read, *len is zero. */
+local void *load(const char *name, size_t *len)
+{
+    size_t size;
+    void *buf, *swap;
+    FILE *in;
+
+    *len = 0;
+    buf = malloc(size = 4096);
+    if (buf == NULL)
+        return NULL;
+    in = name == NULL ? stdin : fopen(name, "rb");
+    if (in != NULL) {
+        for (;;) {
+            *len += fread((char *)buf + *len, 1, size - *len, in);
+            if (*len < size) break;
+            size = bythirds(size);
+            if (size == *len || (swap = realloc(buf, size)) == NULL) {
+                free(buf);
+                buf = NULL;
+                break;
+            }
+            buf = swap;
+        }
+        fclose(in);
+    }
+    return buf;
+}
+
+int main(int argc, char **argv)
+{
+    int ret, put = 0, fail = 0;
+    unsigned skip = 0;
+    char *arg, *name = NULL;
+    unsigned char *source = NULL, *dest;
+    size_t len = 0;
+    unsigned long sourcelen, destlen;
+
+    /* process arguments */
+    while (arg = *++argv, --argc)
+        if (arg[0] == '-') {
+            if (arg[1] == 'w' && arg[2] == 0)
+                put = 1;
+            else if (arg[1] == 'f' && arg[2] == 0)
+                fail = 1, put = 1;
+            else if (arg[1] >= '0' && arg[1] <= '9')
+                skip = (unsigned)atoi(arg + 1);
+            else {
+                fprintf(stderr, "invalid option %s\n", arg);
+                return 3;
+            }
+        }
+        else if (name != NULL) {
+            fprintf(stderr, "only one file name allowed\n");
+            return 3;
+        }
+        else
+            name = arg;
+    source = load(name, &len);
+    if (source == NULL) {
+        fprintf(stderr, "memory allocation failure\n");
+        return 4;
+    }
+    if (len == 0) {
+        fprintf(stderr, "could not read %s, or it was empty\n",
+                name == NULL ? "<stdin>" : name);
+        free(source);
+        return 3;
+    }
+    if (skip >= len) {
+        fprintf(stderr, "skip request of %d leaves no input\n", skip);
+        free(source);
+        return 3;
+    }
+
+    /* test inflate data with offset skip */
+    len -= skip;
+    sourcelen = (unsigned long)len;
+    ret = puff(NIL, &destlen, source + skip, &sourcelen);
+    if (ret)
+        fprintf(stderr, "puff() failed with return code %d\n", ret);
+    else {
+        fprintf(stderr, "puff() succeeded uncompressing %lu bytes\n", destlen);
+        if (sourcelen < len) fprintf(stderr, "%lu compressed bytes unused\n",
+                                     len - sourcelen);
+    }
+
+    /* if requested, inflate again and write decompressd data to stdout */
+    if (put && ret == 0) {
+        if (fail)
+            destlen >>= 1;
+        dest = malloc(destlen);
+        if (dest == NULL) {
+            fprintf(stderr, "memory allocation failure\n");
+            free(source);
+            return 4;
+        }
+        puff(dest, &destlen, source + skip, &sourcelen);
+        SET_BINARY_MODE(stdout);
+        fwrite(dest, 1, destlen, stdout);
+        free(dest);
+    }
+
+    /* clean up */
+    free(source);
+    return ret;
+}

contrib/vstudio/vc10/zlib.rc

@@ -2,8 +2,8 @@
 
 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1,2,4,0
+  FILEVERSION	 1.2.5.2,1
-  PRODUCTVERSION 1,2,4,0
+  PRODUCTVERSION 1.2.5.2,1
   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
   FILEFLAGS	0
   FILEOS	VOS_DOS_WINDOWS32
@@ -17,12 +17,12 @@ BEGIN
 
     BEGIN
       VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
-      VALUE "FileVersion",	"1.2.4.0\0"
+      VALUE "FileVersion",	"1.2.5.2\0"
       VALUE "InternalName",	"zlib\0"
       VALUE "OriginalFilename",	"zlib.dll\0"
       VALUE "ProductName",	"ZLib.DLL\0"
       VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
-      VALUE "LegalCopyright", "(C) 1995-2010 Jean-loup Gailly & Mark Adler\0"
+      VALUE "LegalCopyright", "(C) 1995-2011 Jean-loup Gailly & Mark Adler\0"
     END
   END
   BLOCK "VarFileInfo"

contrib/vstudio/vc10/zlibvc.def

@@ -33,7 +33,6 @@ EXPORTS
         zlibVersion                              @27
         gzprintf                                 @28
         gzputc                                   @29
-        gzgetc                                   @30
         gzseek                                   @31
         gzrewind                                 @32
         gztell                                   @33
@@ -55,6 +54,7 @@ EXPORTS
         gzungetc                                 @49
         zlibCompileFlags                         @50
         deflatePrime                             @51
+        deflatePending                           @52
 
         unzOpen                                  @61
         unzClose                                 @62
@@ -115,9 +115,7 @@ EXPORTS
 
 ; zlib1 v1.2.4 added:
         adler32_combine                         @140
-        adler32_combine64                       @141
         crc32_combine                           @142
-        crc32_combine64                         @143
         deflateSetHeader                        @144
         deflateTune                             @145
         gzbuffer                                @146
@@ -125,12 +123,14 @@ EXPORTS
         gzclose_w                               @148
         gzdirect                                @149
         gzoffset                                @150
-        gzoffset64                              @151
-        gzopen64                                @152
-        gzseek64                                @153
-        gztell64                                @154
         inflateGetHeader                        @156
         inflateMark                             @157
         inflatePrime                            @158
         inflateReset2                           @159
         inflateUndermine                        @160
+
+; zlib1 v1.2.6 added:
+        gzgetc_                                 @30
+        gzflags                                 @162
+        inflateResetKeep                        @163
+	deflateResetKeep			@164

contrib/vstudio/vc9/zlib.rc

@@ -2,8 +2,8 @@
 
 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1,2,4,0
+  FILEVERSION	 1.2.5.2,1
-  PRODUCTVERSION 1,2,4,0
+  PRODUCTVERSION 1.2.5.2,1
   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
   FILEFLAGS	0
   FILEOS	VOS_DOS_WINDOWS32
@@ -17,12 +17,12 @@ BEGIN
 
     BEGIN
       VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
-      VALUE "FileVersion",	"1.2.4.0\0"
+      VALUE "FileVersion",	"1.2.5.2\0"
       VALUE "InternalName",	"zlib\0"
       VALUE "OriginalFilename",	"zlib.dll\0"
       VALUE "ProductName",	"ZLib.DLL\0"
       VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
-      VALUE "LegalCopyright", "(C) 1995-2010 Jean-loup Gailly & Mark Adler\0"
+      VALUE "LegalCopyright", "(C) 1995-2011 Jean-loup Gailly & Mark Adler\0"
     END
   END
   BLOCK "VarFileInfo"

contrib/vstudio/vc9/zlibvc.def

@@ -33,7 +33,6 @@ EXPORTS
         zlibVersion                              @27
         gzprintf                                 @28
         gzputc                                   @29
-        gzgetc                                   @30
         gzseek                                   @31
         gzrewind                                 @32
         gztell                                   @33
@@ -55,6 +54,7 @@ EXPORTS
         gzungetc                                 @49
         zlibCompileFlags                         @50
         deflatePrime                             @51
+        deflatePending                           @52
 
         unzOpen                                  @61
         unzClose                                 @62
@@ -115,9 +115,7 @@ EXPORTS
 
 ; zlib1 v1.2.4 added:
         adler32_combine                         @140
-        adler32_combine64                       @141
         crc32_combine                           @142
-        crc32_combine64                         @143
         deflateSetHeader                        @144
         deflateTune                             @145
         gzbuffer                                @146
@@ -125,12 +123,14 @@ EXPORTS
         gzclose_w                               @148
         gzdirect                                @149
         gzoffset                                @150
-        gzoffset64                              @151
-        gzopen64                                @152
-        gzseek64                                @153
-        gztell64                                @154
         inflateGetHeader                        @156
         inflateMark                             @157
         inflatePrime                            @158
         inflateReset2                           @159
         inflateUndermine                        @160
+
+; zlib1 v1.2.6 added:
+        gzgetc_                                 @30
+        gzflags                                 @162
+        inflateResetKeep                        @163
+	deflateResetKeep			@164

crc32.c

@@ -1,5 +1,5 @@
 /* crc32.c -- compute the CRC-32 of a data stream
- * Copyright (C) 1995-2006 Mark Adler
+ * Copyright (C) 1995-2006, 2010, 2011 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  *
  * Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
@@ -17,6 +17,8 @@
   of the crc tables.  Therefore, if you #define DYNAMIC_CRC_TABLE, you should
   first call get_crc_table() to initialize the tables before allowing more than
   one thread to use crc32().
+
+  DYNAMIC_CRC_TABLE and MAKECRCH can be #defined to write out crc32.h.
  */
 
 #ifdef MAKECRCH
@@ -53,6 +55,7 @@
 
 /* Definitions for doing the crc four data bytes at a time. */
 #ifdef BYFOUR
+   typedef u4 crc_table_t;
 #  define REV(w) ((((w)>>24)&0xff)+(((w)>>8)&0xff00)+ \
                 (((w)&0xff00)<<8)+(((w)&0xff)<<24))
    local unsigned long crc32_little OF((unsigned long,
@@ -61,6 +64,7 @@
                         const unsigned char FAR *, unsigned));
 #  define TBLS 8
 #else
+   typedef unsigned long crc_table_t;
 #  define TBLS 1
 #endif /* BYFOUR */
 
@@ -68,16 +72,16 @@
 local unsigned long gf2_matrix_times OF((unsigned long *mat,
                                          unsigned long vec));
 local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
-local uLong crc32_combine_(uLong crc1, uLong crc2, z_off64_t len2);
+local uLong crc32_combine_ OF((uLong crc1, uLong crc2, z_off64_t len2));
 
 
 #ifdef DYNAMIC_CRC_TABLE
 
 local volatile int crc_table_empty = 1;
-local unsigned long FAR crc_table[TBLS][256];
+local crc_table_t FAR crc_table[TBLS][256];
 local void make_crc_table OF((void));
 #ifdef MAKECRCH
-   local void write_table OF((FILE *, const unsigned long FAR *));
+   local void write_table OF((FILE *, const crc_table_t FAR *));
 #endif /* MAKECRCH */
 /*
   Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
@@ -107,9 +111,9 @@ local void make_crc_table OF((void));
 */
 local void make_crc_table()
 {
-    unsigned long c;
+    crc_table_t c;
     int n, k;
-    unsigned long poly;                 /* polynomial exclusive-or pattern */
+    crc_table_t poly;                   /* polynomial exclusive-or pattern */
     /* terms of polynomial defining this crc (except x^32): */
     static volatile int first = 1;      /* flag to limit concurrent making */
     static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
@@ -121,13 +125,13 @@ local void make_crc_table()
         first = 0;
 
         /* make exclusive-or pattern from polynomial (0xedb88320UL) */
-        poly = 0UL;
+        poly = 0;
-        for (n = 0; n < sizeof(p)/sizeof(unsigned char); n++)
+        for (n = 0; n < (int)(sizeof(p)/sizeof(unsigned char)); n++)
-            poly |= 1UL << (31 - p[n]);
+            poly |= (crc_table_t)1 << (31 - p[n]);
 
         /* generate a crc for every 8-bit value */
         for (n = 0; n < 256; n++) {
-            c = (unsigned long)n;
+            c = (crc_table_t)n;
             for (k = 0; k < 8; k++)
                 c = c & 1 ? poly ^ (c >> 1) : c >> 1;
             crc_table[0][n] = c;
@@ -164,7 +168,7 @@ local void make_crc_table()
         if (out == NULL) return;
         fprintf(out, "/* crc32.h -- tables for rapid CRC calculation\n");
         fprintf(out, " * Generated automatically by crc32.c\n */\n\n");
-        fprintf(out, "local const unsigned long FAR ");
+        fprintf(out, "local const crc_table_t FAR ");
         fprintf(out, "crc_table[TBLS][256] =\n{\n  {\n");
         write_table(out, crc_table[0]);
 #  ifdef BYFOUR
@@ -184,12 +188,13 @@ local void make_crc_table()
 #ifdef MAKECRCH
 local void write_table(out, table)
     FILE *out;
-    const unsigned long FAR *table;
+    const crc_table_t FAR *table;
 {
     int n;
 
     for (n = 0; n < 256; n++)
-        fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : "    ", table[n],
+        fprintf(out, "%s0x%08lxUL%s", n % 5 ? "" : "    ",
+                (unsigned long)(table[n]),
                 n == 255 ? "\n" : (n % 5 == 4 ? ",\n" : ", "));
 }
 #endif /* MAKECRCH */
@@ -221,7 +226,7 @@ const unsigned long FAR * ZEXPORT get_crc_table()
 unsigned long ZEXPORT crc32(crc, buf, len)
     unsigned long crc;
     const unsigned char FAR *buf;
-    unsigned len;
+    uInt len;
 {
     if (buf == Z_NULL) return 0UL;
 

crc32.h

@@ -2,7 +2,7 @@
  * Generated automatically by crc32.c
  */
 
-local const unsigned long FAR crc_table[TBLS][256] =
+local const crc_table_t FAR crc_table[TBLS][256] =
 {
   {
     0x00000000UL, 0x77073096UL, 0xee0e612cUL, 0x990951baUL, 0x076dc419UL,

deflate.c

@@ -1,5 +1,5 @@
 /* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
+ * Copyright (C) 1995-2011 Jean-loup Gailly and Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -37,7 +37,7 @@
  *  REFERENCES
  *
  *      Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
- *      Available in http://www.ietf.org/rfc/rfc1951.txt
+ *      Available in http://tools.ietf.org/html/rfc1951
  *
  *      A description of the Rabin and Karp algorithm is given in the book
  *         "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
@@ -52,7 +52,7 @@
 #include "deflate.h"
 
 const char deflate_copyright[] =
-   " deflate 1.2.4 Copyright 1995-2010 Jean-loup Gailly and Mark Adler ";
+   " deflate 1.2.5.2 Copyright 1995-2011 Jean-loup Gailly and Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -235,10 +235,19 @@ int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
 
     strm->msg = Z_NULL;
     if (strm->zalloc == (alloc_func)0) {
+#ifdef Z_SOLO
+        return Z_STREAM_ERROR;
+#else
         strm->zalloc = zcalloc;
         strm->opaque = (voidpf)0;
+#endif
     }
-    if (strm->zfree == (free_func)0) strm->zfree = zcfree;
+    if (strm->zfree == (free_func)0)
+#ifdef Z_SOLO
+        return Z_STREAM_ERROR;
+#else
+        strm->zfree = zcfree;
+#endif
 
 #ifdef FASTEST
     if (level != 0) level = 1;
@@ -314,43 +323,68 @@ int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
     uInt  dictLength;
 {
     deflate_state *s;
-    uInt length = dictLength;
+    uInt str, n;
-    uInt n;
+    int wrap;
-    IPos hash_head = 0;
+    unsigned avail;
+    unsigned char *next;
 
-    if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL ||
+    if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL)
-        strm->state->wrap == 2 ||
+        return Z_STREAM_ERROR;
-        (strm->state->wrap == 1 && strm->state->status != INIT_STATE))
+    s = strm->state;
+    wrap = s->wrap;
+    if (wrap == 2 || (wrap == 1 && s->status != INIT_STATE) || s->lookahead)
         return Z_STREAM_ERROR;
 
-    s = strm->state;
+    /* when using zlib wrappers, compute Adler-32 for provided dictionary */
-    if (s->wrap)
+    if (wrap == 1)
         strm->adler = adler32(strm->adler, dictionary, dictLength);
+    s->wrap = 0;                    /* avoid computing Adler-32 in read_buf */
 
-    if (length < MIN_MATCH) return Z_OK;
+    /* if dictionary would fill window, just replace the history */
-    if (length > s->w_size) {
+    if (dictLength >= s->w_size) {
-        length = s->w_size;
+        if (wrap == 0) {            /* already empty otherwise */
-        dictionary += dictLength - length; /* use the tail of the dictionary */
+            CLEAR_HASH(s);
+            s->strstart = 0;
+            s->block_start = 0L;
+        }
+        dictionary += dictLength - s->w_size;  /* use the tail */
+        dictLength = s->w_size;
     }
-    zmemcpy(s->window, dictionary, length);
-    s->strstart = length;
-    s->block_start = (long)length;
 
-    /* Insert all strings in the hash table (except for the last two bytes).
+    /* insert dictionary into window and hash */
-     * s->lookahead stays null, so s->ins_h will be recomputed at the next
+    avail = strm->avail_in;
-     * call of fill_window.
+    next = strm->next_in;
-     */
+    strm->avail_in = dictLength;
-    s->ins_h = s->window[0];
+    strm->next_in = (Bytef *)dictionary;
-    UPDATE_HASH(s, s->ins_h, s->window[1]);
+    fill_window(s);
-    for (n = 0; n <= length - MIN_MATCH; n++) {
+    while (s->lookahead >= MIN_MATCH) {
-        INSERT_STRING(s, n, hash_head);
+        str = s->strstart;
+        n = s->lookahead - (MIN_MATCH-1);
+        do {
+            UPDATE_HASH(s, s->ins_h, s->window[str + MIN_MATCH-1]);
+#ifndef FASTEST
+            s->prev[str & s->w_mask] = s->head[s->ins_h];
+#endif
+            s->head[s->ins_h] = (Pos)str;
+            str++;
+        } while (--n);
+        s->strstart = str;
+        s->lookahead = MIN_MATCH-1;
+        fill_window(s);
     }
-    if (hash_head) hash_head = 0;  /* to make compiler happy */
+    s->strstart += s->lookahead;
+    s->block_start = (long)s->strstart;
+    s->lookahead = 0;
+    s->match_length = s->prev_length = MIN_MATCH-1;
+    s->match_available = 0;
+    strm->next_in = next;
+    strm->avail_in = avail;
+    s->wrap = wrap;
     return Z_OK;
 }
 
 /* ========================================================================= */
-int ZEXPORT deflateReset (strm)
+int ZEXPORT deflateResetKeep (strm)
     z_streamp strm;
 {
     deflate_state *s;
@@ -380,11 +414,22 @@ int ZEXPORT deflateReset (strm)
     s->last_flush = Z_NO_FLUSH;
 
     _tr_init(s);
-    lm_init(s);
 
     return Z_OK;
 }
 
+/* ========================================================================= */
+int ZEXPORT deflateReset (strm)
+    z_streamp strm;
+{
+    int ret;
+
+    ret = deflateResetKeep(strm);
+    if (ret == Z_OK)
+        lm_init(strm->state);
+    return ret;
+}
+
 /* ========================================================================= */
 int ZEXPORT deflateSetHeader (strm, head)
     z_streamp strm;
@@ -396,6 +441,18 @@ int ZEXPORT deflateSetHeader (strm, head)
     return Z_OK;
 }
 
+/* ========================================================================= */
+int ZEXPORT deflatePending (strm, pending, bits)
+    unsigned *pending;
+    int *bits;
+    z_streamp strm;
+{
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    *pending = strm->state->pending;
+    *bits = strm->state->bi_valid;
+    return Z_OK;
+}
+
 /* ========================================================================= */
 int ZEXPORT deflatePrime (strm, bits, value)
     z_streamp strm;
@@ -945,12 +1002,12 @@ int ZEXPORT deflateCopy (dest, source)
 
     ss = source->state;
 
-    zmemcpy(dest, source, sizeof(z_stream));
+    zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream));
 
     ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
     if (ds == Z_NULL) return Z_MEM_ERROR;
     dest->state = (struct internal_state FAR *) ds;
-    zmemcpy(ds, ss, sizeof(deflate_state));
+    zmemcpy((voidpf)ds, (voidpf)ss, sizeof(deflate_state));
     ds->strm = dest;
 
     ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
@@ -966,8 +1023,8 @@ int ZEXPORT deflateCopy (dest, source)
     }
     /* following zmemcpy do not work for 16-bit MSDOS */
     zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
-    zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos));
+    zmemcpy((voidpf)ds->prev, (voidpf)ss->prev, ds->w_size * sizeof(Pos));
-    zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos));
+    zmemcpy((voidpf)ds->head, (voidpf)ss->head, ds->hash_size * sizeof(Pos));
     zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
 
     ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
@@ -1001,15 +1058,15 @@ local int read_buf(strm, buf, size)
 
     strm->avail_in  -= len;
 
+    zmemcpy(buf, strm->next_in, len);
     if (strm->state->wrap == 1) {
-        strm->adler = adler32(strm->adler, strm->next_in, len);
+        strm->adler = adler32(strm->adler, buf, len);
     }
 #ifdef GZIP
     else if (strm->state->wrap == 2) {
-        strm->adler = crc32(strm->adler, strm->next_in, len);
+        strm->adler = crc32(strm->adler, buf, len);
     }
 #endif
-    zmemcpy(buf, strm->next_in, len);
     strm->next_in  += len;
     strm->total_in += len;
 
@@ -1310,6 +1367,8 @@ local void fill_window(s)
     unsigned more;    /* Amount of free space at the end of the window. */
     uInt wsize = s->w_size;
 
+    Assert(s->lookahead < MIN_LOOKAHEAD, "already enough lookahead");
+
     do {
         more = (unsigned)(s->window_size -(ulg)s->lookahead -(ulg)s->strstart);
 
@@ -1362,7 +1421,7 @@ local void fill_window(s)
 #endif
             more += wsize;
         }
-        if (s->strm->avail_in == 0) return;
+        if (s->strm->avail_in == 0) break;
 
         /* If there was no sliding:
          *    strstart <= WSIZE+MAX_DIST-1 && lookahead <= MIN_LOOKAHEAD - 1 &&
@@ -1427,6 +1486,9 @@ local void fill_window(s)
             s->high_water += init;
         }
     }
+
+    Assert((ulg)s->strstart <= s->window_size - MIN_LOOKAHEAD,
+           "not enough room for search");
 }
 
 /* ===========================================================================
@@ -1749,11 +1811,11 @@ local block_state deflate_rle(s, flush)
     for (;;) {
         /* Make sure that we always have enough lookahead, except
          * at the end of the input file. We need MAX_MATCH bytes
-         * for the longest encodable run.
+         * for the longest run, plus one for the unrolled loop.
          */
-        if (s->lookahead < MAX_MATCH) {
+        if (s->lookahead <= MAX_MATCH) {
             fill_window(s);
-            if (s->lookahead < MAX_MATCH && flush == Z_NO_FLUSH) {
+            if (s->lookahead <= MAX_MATCH && flush == Z_NO_FLUSH) {
                 return need_more;
             }
             if (s->lookahead == 0) break; /* flush the current block */
@@ -1776,6 +1838,7 @@ local block_state deflate_rle(s, flush)
                 if (s->match_length > s->lookahead)
                     s->match_length = s->lookahead;
             }
+            Assert(scan <= s->window+(uInt)(s->window_size-1), "wild scan");
         }
 
         /* Emit match if have run of MIN_MATCH or longer, else emit literal */

deflate.h

@@ -1,5 +1,5 @@
 /* deflate.h -- internal compression state
- * Copyright (C) 1995-2009 Jean-loup Gailly
+ * Copyright (C) 1995-2010 Jean-loup Gailly
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -188,7 +188,7 @@ typedef struct internal_state {
     int nice_match; /* Stop searching when current match exceeds this */
 
                 /* used by trees.c: */
-    /* Didn't use ct_data typedef below to supress compiler warning */
+    /* Didn't use ct_data typedef below to suppress compiler warning */
     struct ct_data_s dyn_ltree[HEAP_SIZE];   /* literal and length tree */
     struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
     struct ct_data_s bl_tree[2*BL_CODES+1];  /* Huffman tree for bit lengths */
@@ -290,13 +290,13 @@ typedef struct internal_state {
    memory checker errors from longest match routines */
 
         /* in trees.c */
-void _tr_init         OF((deflate_state *s));
+void ZLIB_INTERNAL _tr_init OF((deflate_state *s));
-int  _tr_tally        OF((deflate_state *s, unsigned dist, unsigned lc));
+int ZLIB_INTERNAL _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
-void _tr_flush_block  OF((deflate_state *s, charf *buf, ulg stored_len,
+void ZLIB_INTERNAL _tr_flush_block OF((deflate_state *s, charf *buf,
-                          int last));
+                        ulg stored_len, int last));
-void _tr_align        OF((deflate_state *s));
+void ZLIB_INTERNAL _tr_align OF((deflate_state *s));
-void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
+void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf,
-                          int last));
+                        ulg stored_len, int last));
 
 #define d_code(dist) \
    ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
@@ -309,11 +309,11 @@ void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
 /* Inline versions of _tr_tally for speed: */
 
 #if defined(GEN_TREES_H) || !defined(STDC)
-  extern uch _length_code[];
+  extern uch ZLIB_INTERNAL _length_code[];
-  extern uch _dist_code[];
+  extern uch ZLIB_INTERNAL _dist_code[];
 #else
-  extern const uch _length_code[];
+  extern const uch ZLIB_INTERNAL _length_code[];
-  extern const uch _dist_code[];
+  extern const uch ZLIB_INTERNAL _dist_code[];
 #endif
 
 # define _tr_tally_lit(s, c, flush) \

doc/algorithm.txt

@@ -206,4 +206,4 @@ Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3,
 pp. 337-343.
 
 ``DEFLATE Compressed Data Format Specification'' available in
-http://www.ietf.org/rfc/rfc1951.txt
+http://tools.ietf.org/html/rfc1951

gzguts.h

@@ -1,18 +1,22 @@
 /* gzguts.h -- zlib internal header definitions for gz* operations
- * Copyright (C) 2004, 2005, 2010 Mark Adler
+ * Copyright (C) 2004, 2005, 2010, 2011 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
 #ifdef _LARGEFILE64_SOURCE
 #  ifndef _LARGEFILE_SOURCE
-#    define _LARGEFILE_SOURCE
+#    define _LARGEFILE_SOURCE 1
 #  endif
 #  ifdef _FILE_OFFSET_BITS
 #    undef _FILE_OFFSET_BITS
 #  endif
 #endif
 
-#define ZLIB_INTERNAL
+#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33) && !defined(NO_VIZ)
+#  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
+#else
+#  define ZLIB_INTERNAL
+#endif
 
 #include <stdio.h>
 #include "zlib.h"
@@ -23,13 +27,62 @@
 #endif
 #include <fcntl.h>
 
+#if defined(MSDOS) && defined(__TURBOC__)
+#  include <io.h>
+#endif
+
 #ifdef NO_DEFLATE       /* for compatibility with old definition */
 #  define NO_GZCOMPRESS
 #endif
 
-#ifdef WIN32
+#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550)
-#  include <io.h>
+#  ifndef HAVE_VSNPRINTF
-#  define vsnprintf _vsnprintf
+#    define HAVE_VSNPRINTF
+#  endif
+#endif
+
+#if defined(__CYGWIN__)
+#  ifndef HAVE_VSNPRINTF
+#    define HAVE_VSNPRINTF
+#  endif
+#endif
+
+#if defined(MSDOS) && defined(__BORLANDC__) && (BORLANDC > 0x410)
+#  ifndef HAVE_VSNPRINTF
+#    define HAVE_VSNPRINTF
+#  endif
+#endif
+
+#ifndef HAVE_VSNPRINTF
+#  ifdef MSDOS
+/* vsnprintf may exist on some MS-DOS compilers (DJGPP?),
+ but for now we just assume it doesn't. */
+#    define NO_vsnprintf
+#  endif
+#  ifdef __TURBOC__
+#    define NO_vsnprintf
+#  endif
+#  ifdef WIN32
+/* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */
+#    if !defined(vsnprintf) && !defined(NO_vsnprintf)
+#      if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 )
+#         include <io.h>
+#         define vsnprintf _vsnprintf
+#      endif
+#    endif
+#  endif
+#  ifdef __SASC
+#    define NO_vsnprintf
+#  endif
+#  ifdef VMS
+#    define NO_vsnprintf
+#  endif
+#  ifdef __OS400__
+#    define NO_vsnprintf
+#  endif
+#  ifdef __MVS__
+#    define NO_vsnprintf
+#  endif
 #endif
 
 #ifndef local
@@ -44,7 +97,7 @@
 #endif
 
 /* get errno and strerror definition */
-#if defined UNDER_CE && defined NO_ERRNO_H
+#if defined UNDER_CE
 #  include <windows.h>
 #  define zstrerror() gz_strwinerror((DWORD)GetLastError())
 #else
@@ -56,16 +109,19 @@
 #  endif
 #endif
 
-/* MVS fdopen() */
+/* provide prototypes for these when building zlib without LFS */
-#ifdef __MVS__
+#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0
-  #pragma map (fdopen , "\174\174FDOPEN")
+    ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
-   FILE *fdopen(int, const char *);
+    ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
+    ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
+    ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
 #endif
 
-#ifdef _LARGEFILE64_SOURCE
+/* default memLevel */
-#  define z_off64_t off64_t
+#if MAX_MEM_LEVEL >= 8
+#  define DEF_MEM_LEVEL 8
 #else
-#  define z_off64_t z_off_t
+#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
 #endif
 
 /* default i/o buffer size -- double this for output when reading */
@@ -84,23 +140,25 @@
 
 /* internal gzip file state data structure */
 typedef struct {
+        /* exposed contents for gzgetc() macro */
+    struct gzFile_s x;      /* "x" for exposed */
+                            /* x.have: number of bytes available at x.next */
+                            /* x.next: next output data to deliver or write */
+                            /* x.pos: current position in uncompressed data */
         /* used for both reading and writing */
     int mode;               /* see gzip modes above */
     int fd;                 /* file descriptor */
     char *path;             /* path or fd for error messages */
-    z_off64_t pos;          /* current position in uncompressed data */
     unsigned size;          /* buffer size, zero if not allocated yet */
     unsigned want;          /* requested buffer size, default is GZBUFSIZE */
     unsigned char *in;      /* input buffer */
     unsigned char *out;     /* output buffer (double-sized when reading) */
-    unsigned char *next;    /* next output data to deliver or write */
+    int direct;             /* 0 if processing gzip, 1 if transparent */
         /* just for reading */
-    unsigned have;          /* amount of output data unused at next */
-    int eof;                /* true if end of input file reached */
-    z_off64_t start;        /* where the gzip data started, for rewinding */
-    z_off64_t raw;          /* where the raw data started, for seeking */
     int how;                /* 0: get header, 1: copy, 2: decompress */
-    int direct;             /* true if last read direct, false if gzip */
+    z_off64_t start;        /* where the gzip data started, for rewinding */
+    int eof;                /* true if end of input file reached */
+    int past;               /* true if read requested past end */
         /* just for writing */
     int level;              /* compression level */
     int strategy;           /* compression strategy */
@@ -116,9 +174,9 @@ typedef struct {
 typedef gz_state FAR *gz_statep;
 
 /* shared functions */
-ZEXTERN void ZEXPORT gz_error OF((gz_statep, int, const char *));
+void ZLIB_INTERNAL gz_error OF((gz_statep, int, const char *));
-#if defined UNDER_CE && defined NO_ERRNO_H
+#if defined UNDER_CE
-ZEXTERN char ZEXPORT *gz_strwinerror OF((DWORD error));
+char ZLIB_INTERNAL *gz_strwinerror OF((DWORD error));
 #endif
 
 /* GT_OFF(x), where x is an unsigned value, is true if x > maximum z_off64_t
@@ -127,6 +185,6 @@ ZEXTERN char ZEXPORT *gz_strwinerror OF((DWORD error));
 #ifdef INT_MAX
 #  define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > INT_MAX)
 #else
-ZEXTERN unsigned ZEXPORT gz_intmax OF((void));
+unsigned ZLIB_INTERNAL gz_intmax OF((void));
 #  define GT_OFF(x) (sizeof(int) == sizeof(z_off64_t) && (x) > gz_intmax())
 #endif

gzlib.c

@@ -1,21 +1,25 @@
 /* gzlib.c -- zlib functions common to reading and writing gzip files
- * Copyright (C) 2004, 2010 Mark Adler
+ * Copyright (C) 2004, 2010, 2011 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
 #include "gzguts.h"
 
-#ifdef _LARGEFILE64_SOURCE
+#if defined(_WIN32)
+#  define LSEEK _lseeki64
+#else
+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
 #  define LSEEK lseek64
 #else
 #  define LSEEK lseek
 #endif
+#endif
 
 /* Local functions */
 local void gz_reset OF((gz_statep));
 local gzFile gz_open OF((const char *, int, const char *));
 
-#if defined UNDER_CE && defined NO_ERRNO_H
+#if defined UNDER_CE
 
 /* Map the Windows error number in ERROR to a locale-dependent error message
    string and return a pointer to it.  Typically, the values for ERROR come
@@ -26,7 +30,7 @@ local gzFile gz_open OF((const char *, int, const char *));
 
    The gz_strwinerror function does not change the current setting of
    GetLastError. */
-char ZEXPORT *gz_strwinerror (error)
+char ZLIB_INTERNAL *gz_strwinerror (error)
      DWORD error;
 {
     static char buf[1024];
@@ -65,21 +69,21 @@ char ZEXPORT *gz_strwinerror (error)
     return buf;
 }
 
-#endif /* UNDER_CE && NO_ERRNO_H */
+#endif /* UNDER_CE */
 
 /* Reset gzip file state */
 local void gz_reset(state)
     gz_statep state;
 {
+    state->x.have = 0;              /* no output data available */
     if (state->mode == GZ_READ) {   /* for reading ... */
-        state->have = 0;            /* no output data available */
         state->eof = 0;             /* not at end of file */
+        state->past = 0;            /* have not read past end yet */
         state->how = LOOK;          /* look for gzip header */
-        state->direct = 1;          /* default for empty file */
     }
     state->seek = 0;                /* no seek request pending */
     gz_error(state, Z_OK, NULL);    /* clear error */
-    state->pos = 0;                 /* no uncompressed data yet */
+    state->x.pos = 0;               /* no uncompressed data yet */
     state->strm.avail_in = 0;       /* no input data yet */
 }
 
@@ -91,6 +95,10 @@ local gzFile gz_open(path, fd, mode)
 {
     gz_statep state;
 
+    /* check input */
+    if (path == NULL)
+        return NULL;
+
     /* allocate gzFile structure to return */
     state = malloc(sizeof(gz_state));
     if (state == NULL)
@@ -103,6 +111,7 @@ local gzFile gz_open(path, fd, mode)
     state->mode = GZ_NONE;
     state->level = Z_DEFAULT_COMPRESSION;
     state->strategy = Z_DEFAULT_STRATEGY;
+    state->direct = 0;
     while (*mode) {
         if (*mode >= '0' && *mode <= '9')
             state->level = *mode - '0';
@@ -135,6 +144,8 @@ local gzFile gz_open(path, fd, mode)
                 break;
             case 'F':
                 state->strategy = Z_FIXED;
+            case 'T':
+                state->direct = 1;
             default:        /* could consider as an error, but just ignore */
                 ;
             }
@@ -147,6 +158,15 @@ local gzFile gz_open(path, fd, mode)
         return NULL;
     }
 
+    /* can't force transparent read */
+    if (state->mode == GZ_READ) {
+        if (state->direct) {
+            free(state);
+            return NULL;
+        }
+        state->direct = 1;      /* for empty file */
+    }
+
     /* save the path name for error messages */
     state->path = malloc(strlen(path) + 1);
     if (state->path == NULL) {
@@ -172,6 +192,7 @@ local gzFile gz_open(path, fd, mode)
                         O_APPEND))),
             0666);
     if (state->fd == -1) {
+        free(state->path);
         free(state);
         return NULL;
     }
@@ -217,7 +238,7 @@ gzFile ZEXPORT gzdopen(fd, mode)
 
     if (fd == -1 || (path = malloc(7 + 3 * sizeof(int))) == NULL)
         return NULL;
-    sprintf(path, "<fd:%d>", fd);
+    sprintf(path, "<fd:%d>", fd);   /* for debugging */
     gz = gz_open(path, fd, mode);
     free(path);
     return gz;
@@ -242,8 +263,8 @@ int ZEXPORT gzbuffer(file, size)
         return -1;
 
     /* check and set requested size */
-    if (size == 0)
+    if (size < 2)
-        return -1;
+        size = 2;               /* need two bytes to check magic header */
     state->want = size;
     return 0;
 }
@@ -260,7 +281,8 @@ int ZEXPORT gzrewind(file)
     state = (gz_statep)file;
 
     /* check that we're reading and that there's no error */
-    if (state->mode != GZ_READ || state->err != Z_OK)
+    if (state->mode != GZ_READ ||
+            (state->err != Z_OK && state->err != Z_BUF_ERROR))
         return -1;
 
     /* back up and start over */
@@ -288,7 +310,7 @@ z_off64_t ZEXPORT gzseek64(file, offset, whence)
         return -1;
 
     /* check that there's no error */
-    if (state->err != Z_OK)
+    if (state->err != Z_OK && state->err != Z_BUF_ERROR)
         return -1;
 
     /* can only seek from start or relative to current position */
@@ -297,31 +319,32 @@ z_off64_t ZEXPORT gzseek64(file, offset, whence)
 
     /* normalize offset to a SEEK_CUR specification */
     if (whence == SEEK_SET)
-        offset -= state->pos;
+        offset -= state->x.pos;
     else if (state->seek)
         offset += state->skip;
     state->seek = 0;
 
     /* if within raw area while reading, just go there */
     if (state->mode == GZ_READ && state->how == COPY &&
-        state->pos + offset >= state->raw) {
+            state->x.pos + offset >= 0) {
-        ret = LSEEK(state->fd, offset, SEEK_CUR);
+        ret = LSEEK(state->fd, offset - state->x.have, SEEK_CUR);
         if (ret == -1)
             return -1;
-        state->have = 0;
+        state->x.have = 0;
         state->eof = 0;
+        state->past = 0;
         state->seek = 0;
         gz_error(state, Z_OK, NULL);
         state->strm.avail_in = 0;
-        state->pos += offset;
+        state->x.pos += offset;
-        return state->pos;
+        return state->x.pos;
     }
 
     /* calculate skip amount, rewinding if needed for back seek when reading */
     if (offset < 0) {
         if (state->mode != GZ_READ)         /* writing -- can't go backwards */
             return -1;
-        offset += state->pos;
+        offset += state->x.pos;
         if (offset < 0)                     /* before start of file! */
             return -1;
         if (gzrewind(file) == -1)           /* rewind, then skip to offset */
@@ -330,11 +353,11 @@ z_off64_t ZEXPORT gzseek64(file, offset, whence)
 
     /* if reading, skip what's in output buffer (one less gzgetc() check) */
     if (state->mode == GZ_READ) {
-        n = GT_OFF(state->have) || (z_off64_t)state->have > offset ?
+        n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > offset ?
-            (unsigned)offset : state->have;
+            (unsigned)offset : state->x.have;
-        state->have -= n;
+        state->x.have -= n;
-        state->next += n;
+        state->x.next += n;
-        state->pos += n;
+        state->x.pos += n;
         offset -= n;
     }
 
@@ -343,7 +366,7 @@ z_off64_t ZEXPORT gzseek64(file, offset, whence)
         state->seek = 1;
         state->skip = offset;
     }
-    return state->pos + offset;
+    return state->x.pos + offset;
 }
 
 /* -- see zlib.h -- */
@@ -372,7 +395,7 @@ z_off64_t ZEXPORT gztell64(file)
         return -1;
 
     /* return position */
-    return state->pos + (state->seek ? state->skip : 0);
+    return state->x.pos + (state->seek ? state->skip : 0);
 }
 
 /* -- see zlib.h -- */
@@ -432,7 +455,7 @@ int ZEXPORT gzeof(file)
         return 0;
 
     /* return end-of-file state */
-    return state->mode == GZ_READ ? (state->eof && state->have == 0) : 0;
+    return state->mode == GZ_READ ? state->past : 0;
 }
 
 /* -- see zlib.h -- */
@@ -469,8 +492,10 @@ void ZEXPORT gzclearerr(file)
         return;
 
     /* clear error and end-of-file */
-    if (state->mode == GZ_READ)
+    if (state->mode == GZ_READ) {
         state->eof = 0;
+        state->past = 0;
+    }
     gz_error(state, Z_OK, NULL);
 }
 
@@ -480,7 +505,7 @@ void ZEXPORT gzclearerr(file)
    memory).  Simply save the error message as a static string.  If there is an
    allocation failure constructing the error message, then convert the error to
    out of memory. */
-void ZEXPORT gz_error(state, err, msg)
+void ZLIB_INTERNAL gz_error(state, err, msg)
     gz_statep state;
     int err;
     const char *msg;
@@ -492,6 +517,10 @@ void ZEXPORT gz_error(state, err, msg)
         state->msg = NULL;
     }
 
+    /* if fatal, set state->x.have to 0 so that the gzgetc() macro fails */
+    if (err != Z_OK && err != Z_BUF_ERROR)
+        state->x.have = 0;
+
     /* set error code, and if no message, then done */
     state->err = err;
     if (msg == NULL)
@@ -520,7 +549,7 @@ void ZEXPORT gz_error(state, err, msg)
    available) -- we need to do this to cover cases where 2's complement not
    used, since C standard permits 1's complement and sign-bit representations,
    otherwise we could just use ((unsigned)-1) >> 1 */
-unsigned ZEXPORT gz_intmax()
+unsigned ZLIB_INTERNAL gz_intmax()
 {
     unsigned p, q;
 

gzread.c

@@ -1,5 +1,5 @@
 /* gzread.c -- zlib functions for reading gzip files
- * Copyright (C) 2004, 2005, 2010 Mark Adler
+ * Copyright (C) 2004, 2005, 2010, 2011 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -8,10 +8,9 @@
 /* Local functions */
 local int gz_load OF((gz_statep, unsigned char *, unsigned, unsigned *));
 local int gz_avail OF((gz_statep));
-local int gz_next4 OF((gz_statep, unsigned long *));
+local int gz_look OF((gz_statep));
-local int gz_head OF((gz_statep));
 local int gz_decomp OF((gz_statep));
-local int gz_make OF((gz_statep));
+local int gz_fetch OF((gz_statep));
 local int gz_skip OF((gz_statep, z_off64_t));
 
 /* Use read() to load a buffer -- return -1 on error, otherwise 0.  Read from
@@ -46,66 +45,42 @@ local int gz_load(state, buf, len, have)
    error, 0 otherwise.  Note that the eof flag is set when the end of the input
    file is reached, even though there may be unused data in the buffer.  Once
    that data has been used, no more attempts will be made to read the file.
-   gz_avail() assumes that strm->avail_in == 0. */
+   If strm->avail_in != 0, then the current data is moved to the beginning of
+   the input buffer, and then the remainder of the buffer is loaded with the
+   available data from the input file. */
 local int gz_avail(state)
     gz_statep state;
 {
+    unsigned got;
     z_streamp strm = &(state->strm);
 
-    if (state->err != Z_OK)
+    if (state->err != Z_OK && state->err != Z_BUF_ERROR)
         return -1;
     if (state->eof == 0) {
-        if (gz_load(state, state->in, state->size, &(strm->avail_in)) == -1)
+        if (strm->avail_in)
+            memmove(state->in, strm->next_in, strm->avail_in);
+        if (gz_load(state, state->in + strm->avail_in,
+                    state->size - strm->avail_in, &got) == -1)
             return -1;
+        strm->avail_in += got;
         strm->next_in = state->in;
     }
     return 0;
 }
 
-/* Get next byte from input, or -1 if end or error. */
+/* Look for gzip header, set up for inflate or copy.  state->x.have must be 0.
-#define NEXT() ((strm->avail_in == 0 && gz_avail(state) == -1) ? -1 : \
-                (strm->avail_in == 0 ? -1 : \
-                 (strm->avail_in--, *(strm->next_in)++)))
-
-/* Get a four-byte little-endian integer and return 0 on success and the value
-   in *ret.  Otherwise -1 is returned and *ret is not modified. */
-local int gz_next4(state, ret)
-    gz_statep state;
-    unsigned long *ret;
-{
-    int ch;
-    unsigned long val;
-    z_streamp strm = &(state->strm);
-
-    val = NEXT();
-    val += (unsigned)NEXT() << 8;
-    val += (unsigned long)NEXT() << 16;
-    ch = NEXT();
-    if (ch == -1)
-        return -1;
-    val += (unsigned long)ch << 24;
-    *ret = val;
-    return 0;
-}
-
-/* Look for gzip header, set up for inflate or copy.  state->have must be zero.
    If this is the first time in, allocate required memory.  state->how will be
    left unchanged if there is no more input data available, will be set to COPY
    if there is no gzip header and direct copying will be performed, or it will
-   be set to GZIP for decompression, and the gzip header will be skipped so
+   be set to GZIP for decompression.  If direct copying, then leftover input
-   that the next available input data is the raw deflate stream.  If direct
+   data from the input buffer will be copied to the output buffer.  In that
-   copying, then leftover input data from the input buffer will be copied to
+   case, all further file reads will be directly to either the output buffer or
-   the output buffer.  In that case, all further file reads will be directly to
+   a user buffer.  If decompressing, the inflate state will be initialized.
-   either the output buffer or a user buffer.  If decompressing, the inflate
+   gz_look() will return 0 on success or -1 on failure. */
-   state and the check value will be initialized.  gz_head() will return 0 on
+local int gz_look(state)
-   success or -1 on failure.  Failures may include read errors or gzip header
-   errors.  */
-local int gz_head(state)
     gz_statep state;
 {
     z_streamp strm = &(state->strm);
-    int flags;
-    unsigned len;
 
     /* allocate read buffers and inflate memory */
     if (state->size == 0) {
@@ -128,7 +103,7 @@ local int gz_head(state)
         state->strm.opaque = Z_NULL;
         state->strm.avail_in = 0;
         state->strm.next_in = Z_NULL;
-        if (inflateInit2(&(state->strm), -15) != Z_OK) {    /* raw inflate */
+        if (inflateInit2(&(state->strm), 15 + 16) != Z_OK) {    /* gunzip */
             free(state->out);
             free(state->in);
             state->size = 0;
@@ -137,83 +112,45 @@ local int gz_head(state)
         }
     }
 
-    /* get some data in the input buffer */
+    /* get at least the magic bytes in the input buffer */
-    if (strm->avail_in == 0) {
+    if (strm->avail_in < 2) {
         if (gz_avail(state) == -1)
             return -1;
         if (strm->avail_in == 0)
             return 0;
     }
 
-    /* look for the gzip magic header bytes 31 and 139 */
+    /* look for gzip magic bytes -- if there, do gzip decoding (note: there is
-    if (strm->next_in[0] == 31) {
+       a logical dilemma here when considering the case of a partially written
-        strm->avail_in--;
+       gzip file, to wit, if a single 31 byte is written, then we cannot tell
-        strm->next_in++;
+       whether this is a single-byte file, or just a partially written gzip
-        if (strm->avail_in == 0 && gz_avail(state) == -1)
+       file -- for here we assume that if a gzip file is being written, then
-            return -1;
+       the header will be written in a single operation, so that reading a
-        if (strm->avail_in && strm->next_in[0] == 139) {
+       single byte is sufficient indication that it is not a gzip file) */
-            /* we have a gzip header, woo hoo! */
+    if (strm->avail_in > 1 &&
-            strm->avail_in--;
+            strm->next_in[0] == 31 && strm->next_in[1] == 139) {
-            strm->next_in++;
+        inflateReset(strm);
-
+        state->how = GZIP;
-            /* skip rest of header */
+        state->direct = 0;
-            if (NEXT() != 8) {      /* compression method */
+        return 0;
-                gz_error(state, Z_DATA_ERROR, "unknown compression method");
-                return -1;
-            }
-            flags = NEXT();
-            if (flags & 0xe0) {     /* reserved flag bits */
-                gz_error(state, Z_DATA_ERROR, "unknown header flags set");
-                return -1;
-            }
-            NEXT();                 /* modification time */
-            NEXT();
-            NEXT();
-            NEXT();
-            NEXT();                 /* extra flags */
-            NEXT();                 /* operating system */
-            if (flags & 4) {        /* extra field */
-                len = (unsigned)NEXT();
-                len += (unsigned)NEXT() << 8;
-                while (len--)
-                    if (NEXT() < 0)
-                        break;
-            }
-            if (flags & 8)          /* file name */
-                while (NEXT() > 0)
-                    ;
-            if (flags & 16)         /* comment */
-                while (NEXT() > 0)
-                    ;
-            if (flags & 2) {        /* header crc */
-                NEXT();
-                NEXT();
-            }
-            /* an unexpected end of file is not checked for here -- it will be
-               noticed on the first request for uncompressed data */
-
-            /* set up for decompression */
-            inflateReset(strm);
-            strm->adler = crc32(0L, Z_NULL, 0);
-            state->how = GZIP;
-            state->direct = 0;
-            return 0;
-        }
-        else {
-            /* not a gzip file -- save first byte (31) and fall to raw i/o */
-            state->out[0] = 31;
-            state->have = 1;
-        }
     }
 
-    /* doing raw i/o, save start of raw data for seeking, copy any leftover
+    /* no gzip header -- if we were decoding gzip before, then this is trailing
-       input to output -- this assumes that the output buffer is larger than
+       garbage.  Ignore the trailing garbage and finish. */
-       the input buffer, which also assures space for gzungetc() */
+    if (state->direct == 0) {
-    state->raw = state->pos;
+        strm->avail_in = 0;
-    state->next = state->out;
+        state->eof = 1;
+        state->x.have = 0;
+        return 0;
+    }
+
+    /* doing raw i/o, copy any leftover input to output -- this assumes that
+       the output buffer is larger than the input buffer, which also assures
+       space for gzungetc() */
+    state->x.next = state->out;
     if (strm->avail_in) {
-        memcpy(state->next + state->have, strm->next_in, strm->avail_in);
+        memcpy(state->x.next, strm->next_in, strm->avail_in);
-        state->have += strm->avail_in;
+        state->x.have = strm->avail_in;
         strm->avail_in = 0;
     }
     state->how = COPY;
@@ -222,19 +159,15 @@ local int gz_head(state)
 }
 
 /* Decompress from input to the provided next_out and avail_out in the state.
-   If the end of the compressed data is reached, then verify the gzip trailer
+   On return, state->x.have and state->x.next point to the just decompressed
-   check value and length (modulo 2^32).  state->have and state->next are set
+   data.  If the gzip stream completes, state->how is reset to LOOK to look for
-   to point to the just decompressed data, and the crc is updated.  If the
+   the next gzip stream or raw data, once state->x.have is depleted.  Returns 0
-   trailer is verified, state->how is reset to LOOK to look for the next gzip
+   on success, -1 on failure. */
-   stream or raw data, once state->have is depleted.  Returns 0 on success, -1
-   on failure.  Failures may include invalid compressed data or a failed gzip
-   trailer verification. */
 local int gz_decomp(state)
     gz_statep state;
 {
-    int ret;
+    int ret = Z_OK;
     unsigned had;
-    unsigned long crc, len;
     z_streamp strm = &(state->strm);
 
     /* fill output buffer up to end of deflate stream */
@@ -244,15 +177,15 @@ local int gz_decomp(state)
         if (strm->avail_in == 0 && gz_avail(state) == -1)
             return -1;
         if (strm->avail_in == 0) {
-            gz_error(state, Z_DATA_ERROR, "unexpected end of file");
+            gz_error(state, Z_BUF_ERROR, "unexpected end of file");
-            return -1;
+            break;
         }
 
         /* decompress and handle errors */
         ret = inflate(strm, Z_NO_FLUSH);
         if (ret == Z_STREAM_ERROR || ret == Z_NEED_DICT) {
             gz_error(state, Z_STREAM_ERROR,
-                      "internal error: inflate stream corrupt");
+                     "internal error: inflate stream corrupt");
             return -1;
         }
         if (ret == Z_MEM_ERROR) {
@@ -261,67 +194,55 @@ local int gz_decomp(state)
         }
         if (ret == Z_DATA_ERROR) {              /* deflate stream invalid */
             gz_error(state, Z_DATA_ERROR,
-                      strm->msg == NULL ? "compressed data error" : strm->msg);
+                     strm->msg == NULL ? "compressed data error" : strm->msg);
             return -1;
         }
     } while (strm->avail_out && ret != Z_STREAM_END);
 
-    /* update available output and crc check value */
+    /* update available output */
-    state->have = had - strm->avail_out;
+    state->x.have = had - strm->avail_out;
-    state->next = strm->next_out - state->have;
+    state->x.next = strm->next_out - state->x.have;
-    strm->adler = crc32(strm->adler, state->next, state->have);
 
-    /* check gzip trailer if at end of deflate stream */
+    /* if the gzip stream completed successfully, look for another */
-    if (ret == Z_STREAM_END) {
+    if (ret == Z_STREAM_END)
-        if (gz_next4(state, &crc) == -1 || gz_next4(state, &len) == -1) {
+        state->how = LOOK;
-            gz_error(state, Z_DATA_ERROR, "unexpected end of file");
-            return -1;
-        }
-        if (crc != strm->adler) {
-            gz_error(state, Z_DATA_ERROR, "incorrect data check");
-            return -1;
-        }
-        if (len != (strm->total_out & 0xffffffffL)) {
-            gz_error(state, Z_DATA_ERROR, "incorrect length check");
-            return -1;
-        }
-        state->how = LOOK;      /* ready for next stream, once have is 0 (leave
-                                   state->direct unchanged to remember how) */
-    }
 
     /* good decompression */
     return 0;
 }
 
-/* Make data and put in the output buffer.  Assumes that state->have == 0.
+/* Fetch data and put it in the output buffer.  Assumes state->x.have is 0.
    Data is either copied from the input file or decompressed from the input
    file depending on state->how.  If state->how is LOOK, then a gzip header is
-   looked for (and skipped if found) to determine wither to copy or decompress.
+   looked for to determine whether to copy or decompress.  Returns -1 on error,
-   Returns -1 on error, otherwise 0.  gz_make() will leave state->have as COPY
+   otherwise 0.  gz_fetch() will leave state->how as COPY or GZIP unless the
-   or GZIP unless the end of the input file has been reached and all data has
+   end of the input file has been reached and all data has been processed.  */
-   been processed.  */
+local int gz_fetch(state)
-local int gz_make(state)
     gz_statep state;
 {
     z_streamp strm = &(state->strm);
 
-    if (state->how == LOOK) {           /* look for gzip header */
+    do {
-        if (gz_head(state) == -1)
+        switch(state->how) {
-            return -1;
+        case LOOK:      /* -> LOOK, COPY (only if never GZIP), or GZIP */
-        if (state->have)                /* got some data from gz_head() */
+            if (gz_look(state) == -1)
+                return -1;
+            if (state->how == LOOK)
+                return 0;
+            break;
+        case COPY:      /* -> COPY */
+            if (gz_load(state, state->out, state->size << 1, &(state->x.have))
+                    == -1)
+                return -1;
+            state->x.next = state->out;
             return 0;
-    }
+        case GZIP:      /* -> GZIP or LOOK (if end of gzip stream) */
-    if (state->how == COPY) {           /* straight copy */
+            strm->avail_out = state->size << 1;
-        if (gz_load(state, state->out, state->size << 1, &(state->have)) == -1)
+            strm->next_out = state->out;
-            return -1;
+            if (gz_decomp(state) == -1)
-        state->next = state->out;
+                return -1;
-    }
+        }
-    else if (state->how == GZIP) {      /* decompress */
+    } while (state->x.have == 0 && (!state->eof || strm->avail_in));
-        strm->avail_out = state->size << 1;
-        strm->next_out = state->out;
-        if (gz_decomp(state) == -1)
-            return -1;
-    }
     return 0;
 }
 
@@ -335,12 +256,12 @@ local int gz_skip(state, len)
     /* skip over len bytes or reach end-of-file, whichever comes first */
     while (len)
         /* skip over whatever is in output buffer */
-        if (state->have) {
+        if (state->x.have) {
-            n = GT_OFF(state->have) || (z_off64_t)state->have > len ?
+            n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > len ?
-                (unsigned)len : state->have;
+                (unsigned)len : state->x.have;
-            state->have -= n;
+            state->x.have -= n;
-            state->next += n;
+            state->x.next += n;
-            state->pos += n;
+            state->x.pos += n;
             len -= n;
         }
 
@@ -351,7 +272,7 @@ local int gz_skip(state, len)
         /* need more data to skip -- load up output buffer */
         else {
             /* get more output, looking for header if required */
-            if (gz_make(state) == -1)
+            if (gz_fetch(state) == -1)
                 return -1;
         }
     return 0;
@@ -373,14 +294,15 @@ int ZEXPORT gzread(file, buf, len)
     state = (gz_statep)file;
     strm = &(state->strm);
 
-    /* check that we're reading and that there's no error */
+    /* check that we're reading and that there's no (serious) error */
-    if (state->mode != GZ_READ || state->err != Z_OK)
+    if (state->mode != GZ_READ ||
+            (state->err != Z_OK && state->err != Z_BUF_ERROR))
         return -1;
 
     /* since an int is returned, make sure len fits in one, otherwise return
        with an error (this avoids the flaw in the interface) */
     if ((int)len < 0) {
-        gz_error(state, Z_BUF_ERROR, "requested length does not fit in int");
+        gz_error(state, Z_DATA_ERROR, "requested length does not fit in int");
         return -1;
     }
 
@@ -399,22 +321,24 @@ int ZEXPORT gzread(file, buf, len)
     got = 0;
     do {
         /* first just try copying data from the output buffer */
-        if (state->have) {
+        if (state->x.have) {
-            n = state->have > len ? len : state->have;
+            n = state->x.have > len ? len : state->x.have;
-            memcpy(buf, state->next, n);
+            memcpy(buf, state->x.next, n);
-            state->next += n;
+            state->x.next += n;
-            state->have -= n;
+            state->x.have -= n;
         }
 
         /* output buffer empty -- return if we're at the end of the input */
-        else if (state->eof && strm->avail_in == 0)
+        else if (state->eof && strm->avail_in == 0) {
+            state->past = 1;        /* tried to read past end */
             break;
+        }
 
         /* need output data -- for small len or new stream load up our output
            buffer */
         else if (state->how == LOOK || len < (state->size << 1)) {
             /* get more output, looking for header if required */
-            if (gz_make(state) == -1)
+            if (gz_fetch(state) == -1)
                 return -1;
             continue;       /* no progress yet -- go back to memcpy() above */
             /* the copy above assures that we will leave with space in the
@@ -433,15 +357,15 @@ int ZEXPORT gzread(file, buf, len)
             strm->next_out = buf;
             if (gz_decomp(state) == -1)
                 return -1;
-            n = state->have;
+            n = state->x.have;
-            state->have = 0;
+            state->x.have = 0;
         }
 
         /* update progress */
         len -= n;
         buf = (char *)buf + n;
         got += n;
-        state->pos += n;
+        state->x.pos += n;
     } while (len);
 
     /* return number of bytes read into user buffer (will fit in int) */
@@ -449,7 +373,7 @@ int ZEXPORT gzread(file, buf, len)
 }
 
 /* -- see zlib.h -- */
-int ZEXPORT gzgetc(file)
+int ZEXPORT gzgetc_(file)
     gzFile file;
 {
     int ret;
@@ -461,15 +385,19 @@ int ZEXPORT gzgetc(file)
         return -1;
     state = (gz_statep)file;
 
-    /* check that we're reading and that there's no error */
+    /* check that we're reading and that there's no (serious) error */
-    if (state->mode != GZ_READ || state->err != Z_OK)
+    if (state->mode != GZ_READ ||
+        (state->err != Z_OK && state->err != Z_BUF_ERROR))
         return -1;
 
-    /* try output buffer (no need to check for skip request) */
+    /* try output buffer (no need to check for skip request) -- while
-    if (state->have) {
+       this check really isn't required since the gzgetc() macro has
-        state->have--;
+       already determined that x.have is zero, we leave it in for
-        state->pos++;
+       completeness. */
-        return *(state->next)++;
+    if (state->x.have) {
+        state->x.have--;
+        state->x.pos++;
+        return *(state->x.next)++;
     }
 
     /* nothing there -- try gzread() */
@@ -489,8 +417,9 @@ int ZEXPORT gzungetc(c, file)
         return -1;
     state = (gz_statep)file;
 
-    /* check that we're reading and that there's no error */
+    /* check that we're reading and that there's no (serious) error */
-    if (state->mode != GZ_READ || state->err != Z_OK)
+    if (state->mode != GZ_READ ||
+        (state->err != Z_OK && state->err != Z_BUF_ERROR))
         return -1;
 
     /* process a skip request */
@@ -505,32 +434,34 @@ int ZEXPORT gzungetc(c, file)
         return -1;
 
     /* if output buffer empty, put byte at end (allows more pushing) */
-    if (state->have == 0) {
+    if (state->x.have == 0) {
-        state->have = 1;
+        state->x.have = 1;
-        state->next = state->out + (state->size << 1) - 1;
+        state->x.next = state->out + (state->size << 1) - 1;
-        state->next[0] = c;
+        state->x.next[0] = c;
-        state->pos--;
+        state->x.pos--;
+        state->past = 0;
         return c;
     }
 
     /* if no room, give up (must have already done a gzungetc()) */
-    if (state->have == (state->size << 1)) {
+    if (state->x.have == (state->size << 1)) {
-        gz_error(state, Z_BUF_ERROR, "out of room to push characters");
+        gz_error(state, Z_DATA_ERROR, "out of room to push characters");
         return -1;
     }
 
     /* slide output data if needed and insert byte before existing data */
-    if (state->next == state->out) {
+    if (state->x.next == state->out) {
-        unsigned char *src = state->out + state->have;
+        unsigned char *src = state->out + state->x.have;
         unsigned char *dest = state->out + (state->size << 1);
         while (src > state->out)
             *--dest = *--src;
-        state->next = dest;
+        state->x.next = dest;
     }
-    state->have++;
+    state->x.have++;
-    state->next--;
+    state->x.next--;
-    state->next[0] = c;
+    state->x.next[0] = c;
-    state->pos--;
+    state->x.pos--;
+    state->past = 0;
     return c;
 }
 
@@ -550,8 +481,9 @@ char * ZEXPORT gzgets(file, buf, len)
         return NULL;
     state = (gz_statep)file;
 
-    /* check that we're reading and that there's no error */
+    /* check that we're reading and that there's no (serious) error */
-    if (state->mode != GZ_READ || state->err != Z_OK)
+    if (state->mode != GZ_READ ||
+        (state->err != Z_OK && state->err != Z_BUF_ERROR))
         return NULL;
 
     /* process a skip request */
@@ -568,32 +500,31 @@ char * ZEXPORT gzgets(file, buf, len)
     left = (unsigned)len - 1;
     if (left) do {
         /* assure that something is in the output buffer */
-        if (state->have == 0) {
+        if (state->x.have == 0 && gz_fetch(state) == -1)
-            if (gz_make(state) == -1)
+            return NULL;                /* error */
-                return NULL;            /* error */
+        if (state->x.have == 0) {       /* end of file */
-            if (state->have == 0) {     /* end of file */
+            state->past = 1;            /* read past end */
-                if (buf == str)         /* got bupkus */
+            break;                      /* return what we have */
-                    return NULL;
-                break;                  /* got something -- return it */
-            }
         }
 
         /* look for end-of-line in current output buffer */
-        n = state->have > left ? left : state->have;
+        n = state->x.have > left ? left : state->x.have;
-        eol = memchr(state->next, '\n', n);
+        eol = memchr(state->x.next, '\n', n);
         if (eol != NULL)
-            n = (unsigned)(eol - state->next) + 1;
+            n = (unsigned)(eol - state->x.next) + 1;
 
         /* copy through end-of-line, or remainder if not found */
-        memcpy(buf, state->next, n);
+        memcpy(buf, state->x.next, n);
-        state->have -= n;
+        state->x.have -= n;
-        state->next += n;
+        state->x.next += n;
-        state->pos += n;
+        state->x.pos += n;
         left -= n;
         buf += n;
     } while (left && eol == NULL);
 
-    /* found end-of-line or out of space -- terminate string and return it */
+    /* return terminated string, or if nothing, end of file */
+    if (buf == str)
+        return NULL;
     buf[0] = 0;
     return str;
 }
@@ -609,16 +540,12 @@ int ZEXPORT gzdirect(file)
         return 0;
     state = (gz_statep)file;
 
-    /* check that we're reading */
-    if (state->mode != GZ_READ)
-        return 0;
-
     /* if the state is not known, but we can find out, then do so (this is
        mainly for right after a gzopen() or gzdopen()) */
-    if (state->how == LOOK && state->have == 0)
+    if (state->mode == GZ_READ && state->how == LOOK && state->x.have == 0)
-        (void)gz_head(state);
+        (void)gz_look(state);
 
-    /* return 1 if reading direct, 0 if decompressing a gzip stream */
+    /* return 1 if transparent, 0 if processing a gzip stream */
     return state->direct;
 }
 
@@ -626,7 +553,7 @@ int ZEXPORT gzdirect(file)
 int ZEXPORT gzclose_r(file)
     gzFile file;
 {
-    int ret;
+    int ret, err;
     gz_statep state;
 
     /* get internal structure */
@@ -644,9 +571,10 @@ int ZEXPORT gzclose_r(file)
         free(state->out);
         free(state->in);
     }
+    err = state->err == Z_BUF_ERROR ? Z_BUF_ERROR : Z_OK;
     gz_error(state, Z_OK, NULL);
     free(state->path);
     ret = close(state->fd);
     free(state);
-    return ret ? Z_ERRNO : Z_OK;
+    return ret ? Z_ERRNO : err;
 }

gzwrite.c

@@ -1,5 +1,5 @@
 /* gzwrite.c -- zlib functions for writing gzip files
- * Copyright (C) 2004, 2005, 2010 Mark Adler
+ * Copyright (C) 2004, 2005, 2010, 2011 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -18,44 +18,55 @@ local int gz_init(state)
     int ret;
     z_streamp strm = &(state->strm);
 
-    /* allocate input and output buffers */
+    /* allocate input buffer */
     state->in = malloc(state->want);
-    state->out = malloc(state->want);
+    if (state->in == NULL) {
-    if (state->in == NULL || state->out == NULL) {
-        if (state->out != NULL)
-            free(state->out);
-        if (state->in != NULL)
-            free(state->in);
         gz_error(state, Z_MEM_ERROR, "out of memory");
         return -1;
     }
 
-    /* allocate deflate memory, set up for gzip compression */
+    /* only need output buffer and deflate state if compressing */
-    strm->zalloc = Z_NULL;
+    if (!state->direct) {
-    strm->zfree = Z_NULL;
+        /* allocate output buffer */
-    strm->opaque = Z_NULL;
+        state->out = malloc(state->want);
-    ret = deflateInit2(strm, state->level, Z_DEFLATED,
+        if (state->out == NULL) {
-                       15 + 16, 8, state->strategy);
+            free(state->in);
-    if (ret != Z_OK) {
+            gz_error(state, Z_MEM_ERROR, "out of memory");
-        free(state->in);
+            return -1;
-        gz_error(state, Z_MEM_ERROR, "out of memory");
+        }
-        return -1;
+
+        /* allocate deflate memory, set up for gzip compression */
+        strm->zalloc = Z_NULL;
+        strm->zfree = Z_NULL;
+        strm->opaque = Z_NULL;
+        ret = deflateInit2(strm, state->level, Z_DEFLATED,
+                           MAX_WBITS + 16, DEF_MEM_LEVEL, state->strategy);
+        if (ret != Z_OK) {
+            free(state->out);
+            free(state->in);
+            gz_error(state, Z_MEM_ERROR, "out of memory");
+            return -1;
+        }
     }
 
     /* mark state as initialized */
     state->size = state->want;
 
-    /* initialize write buffer */
+    /* initialize write buffer if compressing */
-    strm->avail_out = state->size;
+    if (!state->direct) {
-    strm->next_out = state->out;
+        strm->avail_out = state->size;
-    state->next = strm->next_out;
+        strm->next_out = state->out;
+        state->x.next = strm->next_out;
+    }
     return 0;
 }
 
 /* Compress whatever is at avail_in and next_in and write to the output file.
    Return -1 if there is an error writing to the output file, otherwise 0.
    flush is assumed to be a valid deflate() flush value.  If flush is Z_FINISH,
-   then the deflate() state is reset to start a new gzip stream. */
+   then the deflate() state is reset to start a new gzip stream.  If gz->direct
+   is true, then simply write to the output file without compressing, and
+   ignore flush. */
 local int gz_comp(state, flush)
     gz_statep state;
     int flush;
@@ -68,6 +79,17 @@ local int gz_comp(state, flush)
     if (state->size == 0 && gz_init(state) == -1)
         return -1;
 
+    /* write directly if requested */
+    if (state->direct) {
+        got = write(state->fd, strm->next_in, strm->avail_in);
+        if (got < 0 || (unsigned)got != strm->avail_in) {
+            gz_error(state, Z_ERRNO, zstrerror());
+            return -1;
+        }
+        strm->avail_in = 0;
+        return 0;
+    }
+
     /* run deflate() on provided input until it produces no more output */
     ret = Z_OK;
     do {
@@ -75,8 +97,8 @@ local int gz_comp(state, flush)
            doing Z_FINISH then don't write until we get to Z_STREAM_END */
         if (strm->avail_out == 0 || (flush != Z_NO_FLUSH &&
             (flush != Z_FINISH || ret == Z_STREAM_END))) {
-            have = (unsigned)(strm->next_out - state->next);
+            have = (unsigned)(strm->next_out - state->x.next);
-            if (have && ((got = write(state->fd, state->next, have)) < 0 ||
+            if (have && ((got = write(state->fd, state->x.next, have)) < 0 ||
                          (unsigned)got != have)) {
                 gz_error(state, Z_ERRNO, zstrerror());
                 return -1;
@@ -85,7 +107,7 @@ local int gz_comp(state, flush)
                 strm->avail_out = state->size;
                 strm->next_out = state->out;
             }
-            state->next = strm->next_out;
+            state->x.next = strm->next_out;
         }
 
         /* compress */
@@ -131,7 +153,7 @@ local int gz_zero(state, len)
         }
         strm->avail_in = n;
         strm->next_in = state->in;
-        state->pos += n;
+        state->x.pos += n;
         if (gz_comp(state, Z_NO_FLUSH) == -1)
             return -1;
         len -= n;
@@ -163,7 +185,7 @@ int ZEXPORT gzwrite(file, buf, len)
     /* since an int is returned, make sure len fits in one, otherwise return
        with an error (this avoids the flaw in the interface) */
     if ((int)len < 0) {
-        gz_error(state, Z_BUF_ERROR, "requested length does not fit in int");
+        gz_error(state, Z_DATA_ERROR, "requested length does not fit in int");
         return 0;
     }
 
@@ -193,7 +215,7 @@ int ZEXPORT gzwrite(file, buf, len)
                 n = len;
             memcpy(strm->next_in + strm->avail_in, buf, n);
             strm->avail_in += n;
-            state->pos += n;
+            state->x.pos += n;
             buf = (char *)buf + n;
             len -= n;
             if (len && gz_comp(state, Z_NO_FLUSH) == -1)
@@ -208,7 +230,7 @@ int ZEXPORT gzwrite(file, buf, len)
         /* directly compress user buffer to file */
         strm->avail_in = len;
         strm->next_in = (voidp)buf;
-        state->pos += len;
+        state->x.pos += len;
         if (gz_comp(state, Z_NO_FLUSH) == -1)
             return 0;
     }
@@ -249,7 +271,7 @@ int ZEXPORT gzputc(file, c)
         if (strm->avail_in == 0)
             strm->next_in = state->in;
         strm->next_in[strm->avail_in++] = c;
-        state->pos++;
+        state->x.pos++;
         return c;
     }
 
@@ -274,7 +296,7 @@ int ZEXPORT gzputs(file, str)
     return ret == 0 && len != 0 ? -1 : ret;
 }
 
-#ifdef STDC
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
 #include <stdarg.h>
 
 /* -- see zlib.h -- */
@@ -342,11 +364,11 @@ int ZEXPORTVA gzprintf (gzFile file, const char *format, ...)
     /* update buffer and position, defer compression until needed */
     strm->avail_in = (unsigned)len;
     strm->next_in = state->in;
-    state->pos += len;
+    state->x.pos += len;
     return len;
 }
 
-#else /* !STDC */
+#else /* !STDC && !Z_HAVE_STDARG_H */
 
 /* -- see zlib.h -- */
 int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
@@ -366,6 +388,10 @@ int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
     state = (gz_statep)file;
     strm = &(state->strm);
 
+    /* check that can really pass pointer in ints */
+    if (sizeof(int) != sizeof(void *))
+        return 0;
+
     /* check that we're writing and that there's no error */
     if (state->mode != GZ_WRITE || state->err != Z_OK)
         return 0;
@@ -416,7 +442,7 @@ int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
     /* update buffer and position, defer compression until needed */
     strm->avail_in = (unsigned)len;
     strm->next_in = state->in;
-    state->pos += len;
+    state->x.pos += len;
     return len;
 }
 
@@ -500,7 +526,7 @@ int ZEXPORT gzsetparams(file, level, strategy)
 int ZEXPORT gzclose_w(file)
     gzFile file;
 {
-    int ret = 0;
+    int ret = Z_OK;
     gz_statep state;
 
     /* get internal structure */
@@ -515,17 +541,53 @@ int ZEXPORT gzclose_w(file)
     /* check for seek request */
     if (state->seek) {
         state->seek = 0;
-        ret += gz_zero(state, state->skip);
+        if (gz_zero(state, state->skip) == -1)
+            ret = state->err;
     }
 
     /* flush, free memory, and close file */
-    ret += gz_comp(state, Z_FINISH);
+    if (gz_comp(state, Z_FINISH) == -1)
-    (void)deflateEnd(&(state->strm));
+        ret = state->err;
-    free(state->out);
+    if (!state->direct) {
+        (void)deflateEnd(&(state->strm));
+        free(state->out);
+    }
     free(state->in);
     gz_error(state, Z_OK, NULL);
     free(state->path);
-    ret += close(state->fd);
+    if (close(state->fd) == -1)
+        ret = Z_ERRNO;
     free(state);
-    return ret ? Z_ERRNO : Z_OK;
+    return ret;
+}
+
+/* used by zlibVersion() to get the vsnprintf story from the horse's mouth */
+unsigned long ZEXPORT gzflags()
+{
+    unsigned long flags = 0;
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#  ifdef NO_vsnprintf
+    flags += 1L << 25;
+#    ifdef HAS_vsprintf_void
+    flags += 1L << 26;
+#    endif
+#  else
+#    ifdef HAS_vsnprintf_void
+    flags += 1L << 26;
+#    endif
+#  endif
+#else
+    flags += 1L << 24;
+#  ifdef NO_snprintf
+    flags += 1L << 25;
+#    ifdef HAS_sprintf_void
+    flags += 1L << 26;
+#    endif
+#  else
+#    ifdef HAS_snprintf_void
+    flags += 1L << 26;
+#    endif
+#  endif
+#endif
+    return flags;
 }

infback.c

@@ -1,5 +1,5 @@
 /* infback.c -- inflate using a call-back interface
- * Copyright (C) 1995-2009 Mark Adler
+ * Copyright (C) 1995-2011 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -42,10 +42,19 @@ int stream_size;
         return Z_STREAM_ERROR;
     strm->msg = Z_NULL;                 /* in case we return an error */
     if (strm->zalloc == (alloc_func)0) {
+#ifdef Z_SOLO
+        return Z_STREAM_ERROR;
+#else
         strm->zalloc = zcalloc;
         strm->opaque = (voidpf)0;
+#endif
     }
-    if (strm->zfree == (free_func)0) strm->zfree = zcfree;
+    if (strm->zfree == (free_func)0)
+#ifdef Z_SOLO
+        return Z_STREAM_ERROR;
+#else
+    strm->zfree = zcfree;
+#endif
     state = (struct inflate_state FAR *)ZALLOC(strm, 1,
                                                sizeof(struct inflate_state));
     if (state == Z_NULL) return Z_MEM_ERROR;
@@ -394,7 +403,6 @@ void FAR *out_desc;
                     PULLBYTE();
                 }
                 if (here.val < 16) {
-                    NEEDBITS(here.bits);
                     DROPBITS(here.bits);
                     state->lens[state->have++] = here.val;
                 }

inffast.c

@@ -1,5 +1,5 @@
 /* inffast.c -- fast decoding
- * Copyright (C) 1995-2008 Mark Adler
+ * Copyright (C) 1995-2008, 2010 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -64,7 +64,7 @@
       requires strm->avail_out >= 258 for each loop to avoid checking for
       output space.
  */
-void inflate_fast(strm, start)
+void ZLIB_INTERNAL inflate_fast(strm, start)
 z_streamp strm;
 unsigned start;         /* inflate()'s starting value for strm->avail_out */
 {

inffast.h

@@ -1,5 +1,5 @@
 /* inffast.h -- header to use inffast.c
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2003, 2010 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -8,4 +8,4 @@
    subject to change. Applications should only use zlib.h.
  */
 
-void inflate_fast OF((z_streamp strm, unsigned start));
+void ZLIB_INTERNAL inflate_fast OF((z_streamp strm, unsigned start));

inffixed.h

@@ -2,9 +2,9 @@
      * Generated automatically by makefixed().
      */
 
-    /* WARNING: this file should *not* be used by applications. It
+    /* WARNING: this file should *not* be used by applications.
-       is part of the implementation of the compression library and
+       It is part of the implementation of this library and is
-       is subject to change. Applications should only use zlib.h.
+       subject to change. Applications should only use zlib.h.
      */
 
     static const code lenfix[512] = {

inflate.c

@@ -1,5 +1,5 @@
 /* inflate.c -- zlib decompression
- * Copyright (C) 1995-2010 Mark Adler
+ * Copyright (C) 1995-2011 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -100,7 +100,7 @@ local int updatewindow OF((z_streamp strm, unsigned out));
 local unsigned syncsearch OF((unsigned FAR *have, unsigned char FAR *buf,
                               unsigned len));
 
-int ZEXPORT inflateReset(strm)
+int ZEXPORT inflateResetKeep(strm)
 z_streamp strm;
 {
     struct inflate_state FAR *state;
@@ -109,15 +109,13 @@ z_streamp strm;
     state = (struct inflate_state FAR *)strm->state;
     strm->total_in = strm->total_out = state->total = 0;
     strm->msg = Z_NULL;
-    strm->adler = 1;        /* to support ill-conceived Java test suite */
+    if (state->wrap)        /* to support ill-conceived Java test suite */
+        strm->adler = state->wrap & 1;
     state->mode = HEAD;
     state->last = 0;
     state->havedict = 0;
     state->dmax = 32768U;
     state->head = Z_NULL;
-    state->wsize = 0;
-    state->whave = 0;
-    state->wnext = 0;
     state->hold = 0;
     state->bits = 0;
     state->lencode = state->distcode = state->next = state->codes;
@@ -127,6 +125,19 @@ z_streamp strm;
     return Z_OK;
 }
 
+int ZEXPORT inflateReset(strm)
+z_streamp strm;
+{
+    struct inflate_state FAR *state;
+
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+    state->wsize = 0;
+    state->whave = 0;
+    state->wnext = 0;
+    return inflateResetKeep(strm);
+}
+
 int ZEXPORT inflateReset2(strm, windowBits)
 z_streamp strm;
 int windowBits;
@@ -180,10 +191,19 @@ int stream_size;
     if (strm == Z_NULL) return Z_STREAM_ERROR;
     strm->msg = Z_NULL;                 /* in case we return an error */
     if (strm->zalloc == (alloc_func)0) {
+#ifdef Z_SOLO
+        return Z_STREAM_ERROR;
+#else
         strm->zalloc = zcalloc;
         strm->opaque = (voidpf)0;
+#endif
     }
-    if (strm->zfree == (free_func)0) strm->zfree = zcfree;
+    if (strm->zfree == (free_func)0)
+#ifdef Z_SOLO
+        return Z_STREAM_ERROR;
+#else
+        strm->zfree = zcfree;
+#endif
     state = (struct inflate_state FAR *)
             ZALLOC(strm, 1, sizeof(struct inflate_state));
     if (state == Z_NULL) return Z_MEM_ERROR;
@@ -321,8 +341,8 @@ void makefixed()
     low = 0;
     for (;;) {
         if ((low % 7) == 0) printf("\n        ");
-        printf("{%u,%u,%d}", state.lencode[low].op, state.lencode[low].bits,
+        printf("{%u,%u,%d}", (low & 127) == 99 ? 64 : state.lencode[low].op,
-               state.lencode[low].val);
+               state.lencode[low].bits, state.lencode[low].val);
         if (++low == size) break;
         putchar(',');
     }
@@ -925,7 +945,6 @@ int flush;
                     PULLBYTE();
                 }
                 if (here.val < 16) {
-                    NEEDBITS(here.bits);
                     DROPBITS(here.bits);
                     state->lens[state->have++] = here.val;
                 }
@@ -1214,7 +1233,8 @@ int flush;
      */
   inf_leave:
     RESTORE();
-    if (state->wsize || (state->mode < CHECK && out != strm->avail_out))
+    if (state->wsize || (out != strm->avail_out && state->mode < BAD &&
+            (state->mode < CHECK || flush != Z_FINISH)))
         if (updatewindow(strm, out)) {
             state->mode = MEM;
             return Z_MEM_ERROR;
@@ -1256,6 +1276,9 @@ uInt dictLength;
 {
     struct inflate_state FAR *state;
     unsigned long id;
+    unsigned char *next;
+    unsigned avail;
+    int ret;
 
     /* check state */
     if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
@@ -1271,21 +1294,19 @@ uInt dictLength;
             return Z_DATA_ERROR;
     }
 
-    /* copy dictionary to window */
+    /* copy dictionary to window using updatewindow(), which will amend the
-    if (updatewindow(strm, strm->avail_out)) {
+       existing dictionary if appropriate */
+    next = strm->next_out;
+    avail = strm->avail_out;
+    strm->next_out = (Bytef *)dictionary + dictLength;
+    strm->avail_out = 0;
+    ret = updatewindow(strm, dictLength);
+    strm->avail_out = avail;
+    strm->next_out = next;
+    if (ret) {
         state->mode = MEM;
         return Z_MEM_ERROR;
     }
-    if (dictLength > state->wsize) {
-        zmemcpy(state->window, dictionary + dictLength - state->wsize,
-                state->wsize);
-        state->whave = state->wsize;
-    }
-    else {
-        zmemcpy(state->window + state->wsize - dictLength, dictionary,
-                dictLength);
-        state->whave = dictLength;
-    }
     state->havedict = 1;
     Tracev((stderr, "inflate:   dictionary set\n"));
     return Z_OK;
@@ -1433,8 +1454,8 @@ z_streamp source;
     }
 
     /* copy state */
-    zmemcpy(dest, source, sizeof(z_stream));
+    zmemcpy((voidpf)dest, (voidpf)source, sizeof(z_stream));
-    zmemcpy(copy, state, sizeof(struct inflate_state));
+    zmemcpy((voidpf)copy, (voidpf)state, sizeof(struct inflate_state));
     if (state->lencode >= state->codes &&
         state->lencode <= state->codes + ENOUGH - 1) {
         copy->lencode = copy->codes + (state->lencode - state->codes);

inftrees.c

@@ -1,5 +1,5 @@
 /* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2010 Mark Adler
+ * Copyright (C) 1995-2011 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate_copyright[] =
-   " inflate 1.2.4 Copyright 1995-2010 Mark Adler ";
+   " inflate 1.2.5.2 Copyright 1995-2011 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -29,7 +29,7 @@ const char inflate_copyright[] =
    table index bits.  It will differ if the request is greater than the
    longest code or if it is less than the shortest code.
  */
-int inflate_table(type, lens, codes, table, bits, work)
+int ZLIB_INTERNAL inflate_table(type, lens, codes, table, bits, work)
 codetype type;
 unsigned short FAR *lens;
 unsigned codes;
@@ -62,7 +62,7 @@ unsigned short FAR *work;
         35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
-        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 198, 71};
+        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 202, 194};
     static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
         257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
@@ -289,38 +289,14 @@ unsigned short FAR *work;
         }
     }
 
-    /*
+    /* fill in remaining table entry if code is incomplete (guaranteed to have
-       Fill in rest of table for incomplete codes.  This loop is similar to the
+       at most one remaining entry, since if the code is incomplete, the
-       loop above in incrementing huff for table indices.  It is assumed that
+       maximum code length that was allowed to get this far is one bit) */
-       len is equal to curr + drop, so there is no loop needed to increment
+    if (huff != 0) {
-       through high index bits.  When the current sub-table is filled, the loop
+        here.op = (unsigned char)64;            /* invalid code marker */
-       drops back to the root table to fill in any remaining entries there.
+        here.bits = (unsigned char)(len - drop);
-     */
+        here.val = (unsigned short)0;
-    here.op = (unsigned char)64;                /* invalid code marker */
+        next[huff] = here;
-    here.bits = (unsigned char)(len - drop);
-    here.val = (unsigned short)0;
-    while (huff != 0) {
-        /* when done with sub-table, drop back to root table */
-        if (drop != 0 && (huff & mask) != low) {
-            drop = 0;
-            len = root;
-            next = *table;
-            here.bits = (unsigned char)len;
-        }
-
-        /* put invalid code marker in table */
-        next[huff >> drop] = here;
-
-        /* backwards increment the len-bit code huff */
-        incr = 1U << (len - 1);
-        while (huff & incr)
-            incr >>= 1;
-        if (incr != 0) {
-            huff &= incr - 1;
-            huff += incr;
-        }
-        else
-            huff = 0;
     }
 
     /* set return parameters */

inftrees.h

@@ -1,5 +1,5 @@
 /* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995-2005 Mark Adler
+ * Copyright (C) 1995-2005, 2010 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -57,6 +57,6 @@ typedef enum {
     DISTS
 } codetype;
 
-extern int inflate_table OF((codetype type, unsigned short FAR *lens,
+int ZLIB_INTERNAL inflate_table OF((codetype type, unsigned short FAR *lens,
                              unsigned codes, code FAR * FAR *table,
                              unsigned FAR *bits, unsigned short FAR *work));

make_vms.com

@@ -175,13 +175,13 @@ $   write sys$output "Building Zlib ..."
 $   CALL MAKE libz.OLB "lib/crea libz.olb *.obj" *.OBJ
 $   write sys$output "Building example..."
 $   CALL MAKE example.OBJ "CC ''CCOPT' example" -
-                example.c zlib.h zconf.h
+                test/example.c zlib.h zconf.h
 $   call make example.exe "LINK example,libz.olb/lib" example.obj libz.olb
 $   if f$search("x11vms:xvmsutils.olb") .nes. ""
 $   then
 $     write sys$output "Building minigzip..."
 $     CALL MAKE minigzip.OBJ "CC ''CCOPT' minigzip" -
-                minigzip.c zlib.h zconf.h
+                test/minigzip.c zlib.h zconf.h
 $     call make minigzip.exe -
                 "LINK minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib" -
                 minigzip.obj libz.olb
@@ -431,7 +431,7 @@ adler32.obj  : adler32.c zutil.h zlib.h zconf.h
 compress.obj : compress.c zlib.h zconf.h
 crc32.obj    : crc32.c zutil.h zlib.h zconf.h
 deflate.obj  : deflate.c deflate.h zutil.h zlib.h zconf.h
-example.obj  : example.c zlib.h zconf.h
+example.obj  : test/example.c zlib.h zconf.h
 gzclose.obj  : gzclose.c zutil.h zlib.h zconf.h
 gzlib.obj    : gzlib.c zutil.h zlib.h zconf.h
 gzread.obj   : gzread.c zutil.h zlib.h zconf.h
@@ -439,7 +439,7 @@ gzwrite.obj  : gzwrite.c zutil.h zlib.h zconf.h
 inffast.obj  : inffast.c zutil.h zlib.h zconf.h inftrees.h inffast.h
 inflate.obj  : inflate.c zutil.h zlib.h zconf.h
 inftrees.obj : inftrees.c zutil.h zlib.h zconf.h inftrees.h
-minigzip.obj : minigzip.c zlib.h zconf.h
+minigzip.obj : test/minigzip.c zlib.h zconf.h
 trees.obj    : trees.c deflate.h zutil.h zlib.h zconf.h
 uncompr.obj  : uncompr.c zlib.h zconf.h
 zutil.obj    : zutil.c zutil.h zlib.h zconf.h

msdos/Makefile.bor

@@ -86,9 +86,9 @@ uncompr.obj: uncompr.c zlib.h zconf.h
 
 zutil.obj: zutil.c zutil.h zlib.h zconf.h
 
-example.obj: example.c zlib.h zconf.h
+example.obj: test/example.c zlib.h zconf.h
 
-minigzip.obj: minigzip.c zlib.h zconf.h
+minigzip.obj: test/minigzip.c zlib.h zconf.h
 
 
 # the command line is cut to fit in the MS-DOS 128 byte limit:

msdos/Makefile.msc

@@ -80,10 +80,10 @@ uncompr.obj: uncompr.c zlib.h zconf.h
 
 zutil.obj: zutil.c zutil.h zlib.h zconf.h
 
-example.obj: example.c zlib.h zconf.h
+example.obj: test/example.c zlib.h zconf.h
 	$(CC) -c $(CFLAGS) $*.c
 
-minigzip.obj: minigzip.c zlib.h zconf.h
+minigzip.obj: test/minigzip.c zlib.h zconf.h
 	$(CC) -c $(CFLAGS) $*.c
 
 

msdos/Makefile.tc

@@ -71,9 +71,9 @@ uncompr.obj: uncompr.c zlib.h zconf.h
 
 zutil.obj: zutil.c zutil.h zlib.h zconf.h
 
-example.obj: example.c zlib.h zconf.h
+example.obj: test/example.c zlib.h zconf.h
 
-minigzip.obj: minigzip.c zlib.h zconf.h
+minigzip.obj: test/minigzip.c zlib.h zconf.h
 
 
 # the command line is cut to fit in the MS-DOS 128 byte limit:

old/as400/compile.clp

@@ -1,123 +0,0 @@
-/******************************************************************************/
-/*                                                                            */
-/*  ZLIB                                                                      */
-/*                                                                            */
-/*    Compile sources into modules and link them into a service program.      */
-/*                                                                            */
-/******************************************************************************/
-
-             PGM
-
-/*      Configuration adjustable parameters.                                  */
-
-             DCL        VAR(&SRCLIB) TYPE(*CHAR) LEN(10) +
-                          VALUE('ZLIB')                         /* Source library. */
-             DCL        VAR(&SRCFILE) TYPE(*CHAR) LEN(10) +
-                          VALUE('SOURCES')                      /* Source member file. */
-             DCL        VAR(&CTLFILE) TYPE(*CHAR) LEN(10) +
-                          VALUE('TOOLS')                        /* Control member file. */
-
-             DCL        VAR(&MODLIB) TYPE(*CHAR) LEN(10) +
-                          VALUE('ZLIB')                         /* Module library. */
-
-             DCL        VAR(&SRVLIB) TYPE(*CHAR) LEN(10) +
-                          VALUE('LGPL')                         /* Service program library. */
-
-             DCL        VAR(&CFLAGS) TYPE(*CHAR) +
-                          VALUE('OPTIMIZE(40)')                 /* Compile options. */
-
-
-/*      Working storage.                                                      */
-
-             DCL        VAR(&CMDLEN) TYPE(*DEC) LEN(15 5) VALUE(300)    /* Command length. */
-             DCL        VAR(&CMD) TYPE(*CHAR) LEN(512)
-
-
-/*      Compile sources into modules.                                         */
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/ADLER32)               SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/COMPRESS)              SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/CRC32)                 SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/DEFLATE)               SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/GZIO)                  SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/INFBACK)               SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/INFFAST)               SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/INFLATE)               SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/INFTREES)              SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/TREES)                 SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/UNCOMPR)               SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-             CHGVAR     VAR(&CMD) VALUE('CRTCMOD MODULE(' *TCAT &MODLIB *TCAT  +
-                        '/ZUTIL)                 SRCFILE(' *TCAT               +
-                        &SRCLIB *TCAT '/' *TCAT &SRCFILE *TCAT                 +
-                        ') SYSIFCOPT(*IFSIO)' *BCAT &CFLAGS)
-             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
-
-
-/*      Link modules into a service program.                                  */
-
-             CRTSRVPGM  SRVPGM(&SRVLIB/ZLIB) +
-                          MODULE(&MODLIB/ADLER32     &MODLIB/COMPRESS    +
-                                 &MODLIB/CRC32       &MODLIB/DEFLATE     +
-                                 &MODLIB/GZIO        &MODLIB/INFBACK     +
-                                 &MODLIB/INFFAST     &MODLIB/INFLATE     +
-                                 &MODLIB/INFTREES    &MODLIB/TREES       +
-                                 &MODLIB/UNCOMPR     &MODLIB/ZUTIL)      +
-                          SRCFILE(&SRCLIB/&CTLFILE) SRCMBR(BNDSRC) +
-                          TEXT('ZLIB 1.2.3') TGTRLS(V4R4M0)
-
-             ENDPGM

old/visualc6/example.dsp

@@ -259,7 +259,7 @@ LINK32=link.exe
 # PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
 # Begin Source File
 
-SOURCE=..\..\example.c
+SOURCE=..\..\test\example.c
 # End Source File
 # End Group
 # Begin Group "Header Files"

projects/README.projects

@@ -1,41 +0,0 @@
-This directory contains project files for building zlib under various
-Integrated Development Environments (IDE).
-
-If you wish to submit a new project to this directory, you should comply
-to the following requirements.  Otherwise (e.g. if you wish to integrate
-a custom piece of code that changes the zlib interface or its behavior),
-please consider submitting the project to the contrib directory.
-
-
-Requirements
-============
-
-- The project must build zlib using the source files from the official
-  zlib source distribution, exclusively.
-
-- If the project produces redistributable builds (e.g. shared objects
-  or DLL files), these builds must be compatible to those produced by
-  makefiles, if such makefiles exist in the zlib distribution.
-  In particular, if the project produces a DLL build for the Win32
-  platform, this build must comply to the officially-ammended Win32 DLL
-  Application Binary Interface (ABI), described in win32/DLL_FAQ.txt.
-
-- The project may provide additional build targets, which depend on
-  3rd-party (unofficially-supported) software, present in the contrib
-  directory.  For example, it is possible to provide an "ASM build",
-  besides the officially-supported build, and have ASM source files
-  among its dependencies.
-
-- If there are significant differences between the project files created
-  by different versions of an IDE (e.g. Visual C++ 6.0 vs. 7.0), the name
-  of the project directory should contain the version number of the IDE
-  for which the project is intended (e.g. "visualc6" for Visual C++ 6.0,
-  or "visualc7" for Visual C++ 7.0 and 7.1).
-
-
-Current projects
-================
-
-visualc6/   by Simon-Pierre Cadieux <methodex@methodex.ca>
-            and Cosmin Truta <cosmint@cs.ubbcluj.ro>
-        Project for Microsoft Visual C++ 6.0

qnx/package.qpg

@@ -25,10 +25,10 @@
       <QPG:Files>
          <QPG:Add file="../zconf.h" install="/opt/include/" user="root:sys" permission="644"/>
          <QPG:Add file="../zlib.h" install="/opt/include/" user="root:sys" permission="644"/>
-         <QPG:Add file="../libz.so.1.2.4" install="/opt/lib/" user="root:bin" permission="644"/>
+         <QPG:Add file="../libz.so.1.2.5.2" install="/opt/lib/" user="root:bin" permission="644"/>
-         <QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.4"/>
+         <QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.5.2"/>
-         <QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.4"/>
+         <QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.5.2"/>
-         <QPG:Add file="../libz.so.1.2.4" install="/opt/lib/" component="slib"/>
+         <QPG:Add file="../libz.so.1.2.5.2" install="/opt/lib/" component="slib"/>
       </QPG:Files>
 
       <QPG:PackageFilter>
@@ -63,7 +63,7 @@
             </QPM:ProductDescription>
 
             <QPM:ReleaseDescription>
-               <QPM:ReleaseVersion>1.2.4</QPM:ReleaseVersion>
+               <QPM:ReleaseVersion>1.2.5.2</QPM:ReleaseVersion>
                <QPM:ReleaseUrgency>Medium</QPM:ReleaseUrgency>
                <QPM:ReleaseStability>Stable</QPM:ReleaseStability>
                <QPM:ReleaseNoteMinor></QPM:ReleaseNoteMinor>

test/example.c

@@ -1,5 +1,5 @@
 /* example.c -- usage example of the zlib compression library
- * Copyright (C) 1995-2006 Jean-loup Gailly.
+ * Copyright (C) 1995-2006, 2011 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -34,10 +34,6 @@ const char hello[] = "hello, hello!";
 const char dictionary[] = "hello";
 uLong dictId; /* Adler32 value of the dictionary */
 
-void test_compress      OF((Byte *compr, uLong comprLen,
-                            Byte *uncompr, uLong uncomprLen));
-void test_gzio          OF((const char *fname,
-                            Byte *uncompr, uLong uncomprLen));
 void test_deflate       OF((Byte *compr, uLong comprLen));
 void test_inflate       OF((Byte *compr, uLong comprLen,
                             Byte *uncompr, uLong uncomprLen));
@@ -53,6 +49,39 @@ void test_dict_inflate  OF((Byte *compr, uLong comprLen,
                             Byte *uncompr, uLong uncomprLen));
 int  main               OF((int argc, char *argv[]));
 
+
+#ifdef Z_SOLO
+
+void *myalloc OF((void *, unsigned, unsigned));
+void myfree OF((void *, void *));
+
+void *myalloc(q, n, m)
+    void *q;
+    unsigned n, m;
+{
+    q = Z_NULL;
+    return calloc(n, m);
+}
+
+void myfree(void *q, void *p)
+{
+    q = Z_NULL;
+    free(p);
+}
+
+static alloc_func zalloc = myalloc;
+static free_func zfree = myfree;
+
+#else /* !Z_SOLO */
+
+static alloc_func zalloc = (alloc_func)0;
+static free_func zfree = (free_func)0;
+
+void test_compress      OF((Byte *compr, uLong comprLen,
+                            Byte *uncompr, uLong uncomprLen));
+void test_gzio          OF((const char *fname,
+                            Byte *uncompr, uLong uncomprLen));
+
 /* ===========================================================================
  * Test compress() and uncompress()
  */
@@ -163,6 +192,8 @@ void test_gzio(fname, uncompr, uncomprLen)
 #endif
 }
 
+#endif /* Z_SOLO */
+
 /* ===========================================================================
  * Test deflate() with small buffers
  */
@@ -174,8 +205,8 @@ void test_deflate(compr, comprLen)
     int err;
     uLong len = (uLong)strlen(hello)+1;
 
-    c_stream.zalloc = (alloc_func)0;
+    c_stream.zalloc = zalloc;
-    c_stream.zfree = (free_func)0;
+    c_stream.zfree = zfree;
     c_stream.opaque = (voidpf)0;
 
     err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
@@ -213,8 +244,8 @@ void test_inflate(compr, comprLen, uncompr, uncomprLen)
 
     strcpy((char*)uncompr, "garbage");
 
-    d_stream.zalloc = (alloc_func)0;
+    d_stream.zalloc = zalloc;
-    d_stream.zfree = (free_func)0;
+    d_stream.zfree = zfree;
     d_stream.opaque = (voidpf)0;
 
     d_stream.next_in  = compr;
@@ -252,8 +283,8 @@ void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
     z_stream c_stream; /* compression stream */
     int err;
 
-    c_stream.zalloc = (alloc_func)0;
+    c_stream.zalloc = zalloc;
-    c_stream.zfree = (free_func)0;
+    c_stream.zfree = zfree;
     c_stream.opaque = (voidpf)0;
 
     err = deflateInit(&c_stream, Z_BEST_SPEED);
@@ -309,8 +340,8 @@ void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
 
     strcpy((char*)uncompr, "garbage");
 
-    d_stream.zalloc = (alloc_func)0;
+    d_stream.zalloc = zalloc;
-    d_stream.zfree = (free_func)0;
+    d_stream.zfree = zfree;
     d_stream.opaque = (voidpf)0;
 
     d_stream.next_in  = compr;
@@ -349,8 +380,8 @@ void test_flush(compr, comprLen)
     int err;
     uInt len = (uInt)strlen(hello)+1;
 
-    c_stream.zalloc = (alloc_func)0;
+    c_stream.zalloc = zalloc;
-    c_stream.zfree = (free_func)0;
+    c_stream.zfree = zfree;
     c_stream.opaque = (voidpf)0;
 
     err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
@@ -388,8 +419,8 @@ void test_sync(compr, comprLen, uncompr, uncomprLen)
 
     strcpy((char*)uncompr, "garbage");
 
-    d_stream.zalloc = (alloc_func)0;
+    d_stream.zalloc = zalloc;
-    d_stream.zfree = (free_func)0;
+    d_stream.zfree = zfree;
     d_stream.opaque = (voidpf)0;
 
     d_stream.next_in  = compr;
@@ -430,15 +461,15 @@ void test_dict_deflate(compr, comprLen)
     z_stream c_stream; /* compression stream */
     int err;
 
-    c_stream.zalloc = (alloc_func)0;
+    c_stream.zalloc = zalloc;
-    c_stream.zfree = (free_func)0;
+    c_stream.zfree = zfree;
     c_stream.opaque = (voidpf)0;
 
     err = deflateInit(&c_stream, Z_BEST_COMPRESSION);
     CHECK_ERR(err, "deflateInit");
 
     err = deflateSetDictionary(&c_stream,
-                               (const Bytef*)dictionary, sizeof(dictionary));
+                (const Bytef*)dictionary, (int)sizeof(dictionary));
     CHECK_ERR(err, "deflateSetDictionary");
 
     dictId = c_stream.adler;
@@ -469,8 +500,8 @@ void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
 
     strcpy((char*)uncompr, "garbage");
 
-    d_stream.zalloc = (alloc_func)0;
+    d_stream.zalloc = zalloc;
-    d_stream.zfree = (free_func)0;
+    d_stream.zfree = zfree;
     d_stream.opaque = (voidpf)0;
 
     d_stream.next_in  = compr;
@@ -491,7 +522,7 @@ void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
                 exit(1);
             }
             err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary,
-                                       sizeof(dictionary));
+                                       (int)sizeof(dictionary));
         }
         CHECK_ERR(err, "inflate with dict");
     }
@@ -540,10 +571,15 @@ int main(argc, argv)
         printf("out of memory\n");
         exit(1);
     }
+
+#ifdef Z_SOLO
+    argc = strlen(argv[0]);
+#else
     test_compress(compr, comprLen, uncompr, uncomprLen);
 
     test_gzio((argc > 1 ? argv[1] : TESTFILE),
               uncompr, uncomprLen);
+#endif
 
     test_deflate(compr, comprLen);
     test_inflate(compr, comprLen, uncompr, uncomprLen);

test/infcover.c

@@ -0,0 +1,671 @@
+/* infcover.c -- test zlib's inflate routines with full code coverage
+ * Copyright (C) 2011 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* to use, do: ./configure --cover && make cover */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <assert.h>
+#include "zlib.h"
+
+/* get definition of internal structure so we can mess with it (see pull()),
+   and so we can call inflate_trees() (see cover5()) */
+#define ZLIB_INTERNAL
+#include "inftrees.h"
+#include "inflate.h"
+
+#define local static
+
+/* -- memory tracking routines -- */
+
+/*
+   These memory tracking routines are provided to zlib and track all of zlib's
+   allocations and deallocations, check for LIFO operations, keep a current
+   and high water mark of total bytes requested, optionally set a limit on the
+   total memory that can be allocated, and when done check for memory leaks.
+
+   They are used as follows:
+
+   z_stream strm;
+   mem_setup(&strm)         initializes the memory tracking and sets the
+                            zalloc, zfree, and opaque members of strm to use
+                            memory tracking for all zlib operations on strm
+   mem_limit(&strm, limit)  sets a limit on the total bytes requested -- a
+                            request that exceeds this limit will result in an
+                            allocation failure (returns NULL) -- setting the
+                            limit to zero means no limit, which is the default
+                            after mem_setup()
+   mem_used(&strm, "msg")   prints to stderr "msg" and the total bytes used
+   mem_high(&strm, "msg")   prints to stderr "msg" and the high water mark
+   mem_done(&strm, "msg")   ends memory tracking, releases all allocations
+                            for the tracking as well as leaked zlib blocks, if
+                            any.  If there was anything unusual, such as leaked
+                            blocks, non-FIFO frees, or frees of addresses not
+                            allocated, then "msg" and information about the
+                            problem is printed to stderr.  If everything is
+                            normal, nothing is printed. mem_done resets the
+                            strm members to Z_NULL to use the default memory
+                            allocation routines on the next zlib initialization
+                            using strm.
+ */
+
+/* these items are strung together in a linked list, one for each allocation */
+struct mem_item {
+    void *ptr;                  /* pointer to allocated memory */
+    size_t size;                /* requested size of allocation */
+    struct mem_item *next;      /* pointer to next item in list, or NULL */
+};
+
+/* this structure is at the root of the linked list, and tracks statistics */
+struct mem_zone {
+    struct mem_item *first;     /* pointer to first item in list, or NULL */
+    size_t total, highwater;    /* total allocations, and largest total */
+    size_t limit;               /* memory allocation limit, or 0 if no limit */
+    int notlifo, rogue;         /* counts of non-LIFO frees and rogue frees */
+};
+
+/* memory allocation routine to pass to zlib */
+local void *mem_alloc(void *mem, unsigned count, unsigned size)
+{
+    void *ptr;
+    struct mem_item *item;
+    struct mem_zone *zone = mem;
+    size_t len = count * (size_t)size;
+
+    /* induced allocation failure */
+    if (zone == NULL || (zone->limit && zone->total + len > zone->limit))
+        return NULL;
+
+    /* perform allocation using the standard library, fill memory with a
+       non-zero value to make sure that the code isn't depending on zeros */
+    ptr = malloc(len);
+    if (ptr == NULL)
+        return NULL;
+    memset(ptr, 0xa5, len);
+
+    /* create a new item for the list */
+    item = malloc(sizeof(struct mem_item));
+    if (item == NULL) {
+        free(ptr);
+        return NULL;
+    }
+    item->ptr = ptr;
+    item->size = len;
+
+    /* insert item at the beginning of the list */
+    item->next = zone->first;
+    zone->first = item;
+
+    /* update the statistics */
+    zone->total += item->size;
+    if (zone->total > zone->highwater)
+        zone->highwater = zone->total;
+
+    /* return the allocated memory */
+    return ptr;
+}
+
+/* memory free routine to pass to zlib */
+local void mem_free(void *mem, void *ptr)
+{
+    struct mem_item *item, *next;
+    struct mem_zone *zone = mem;
+
+    /* if no zone, just do a free */
+    if (zone == NULL) {
+        free(ptr);
+        return;
+    }
+
+    /* point next to the item that matches ptr, or NULL if not found -- remove
+       the item from the linked list if found */
+    next = zone->first;
+    if (next) {
+        if (next->ptr == ptr)
+            zone->first = next->next;   /* first one is it, remove from list */
+        else {
+            do {                        /* search the linked list */
+                item = next;
+                next = item->next;
+            } while (next != NULL && next->ptr != ptr);
+            if (next) {                 /* if found, remove from linked list */
+                item->next = next->next;
+                zone->notlifo++;        /* not a LIFO free */
+            }
+
+        }
+    }
+
+    /* if found, update the statistics and free the item */
+    if (next) {
+        zone->total -= next->size;
+        free(next);
+    }
+
+    /* if not found, update the rogue count */
+    else
+        zone->rogue++;
+
+    /* in any case, do the requested free with the standard library function */
+    free(ptr);
+}
+
+/* set up a controlled memory allocation space for monitoring, set the stream
+   parameters to the controlled routines, with opaque pointing to the space */
+local void mem_setup(z_stream *strm)
+{
+    struct mem_zone *zone;
+
+    zone = malloc(sizeof(struct mem_zone));
+    assert(zone != NULL);
+    zone->first = NULL;
+    zone->total = 0;
+    zone->highwater = 0;
+    zone->limit = 0;
+    zone->notlifo = 0;
+    zone->rogue = 0;
+    strm->opaque = zone;
+    strm->zalloc = mem_alloc;
+    strm->zfree = mem_free;
+}
+
+/* set a limit on the total memory allocation, or 0 to remove the limit */
+local void mem_limit(z_stream *strm, size_t limit)
+{
+    struct mem_zone *zone = strm->opaque;
+
+    zone->limit = limit;
+}
+
+/* show the current total requested allocations in bytes */
+local void mem_used(z_stream *strm, char *prefix)
+{
+    struct mem_zone *zone = strm->opaque;
+
+    fprintf(stderr, "%s: %lu allocated\n", prefix, zone->total);
+}
+
+/* show the high water allocation in bytes */
+local void mem_high(z_stream *strm, char *prefix)
+{
+    struct mem_zone *zone = strm->opaque;
+
+    fprintf(stderr, "%s: %lu high water mark\n", prefix, zone->highwater);
+}
+
+/* release the memory allocation zone -- if there are any surprises, notify */
+local void mem_done(z_stream *strm, char *prefix)
+{
+    int count = 0;
+    struct mem_item *item, *next;
+    struct mem_zone *zone = strm->opaque;
+
+    /* show high water mark */
+    mem_high(strm, prefix);
+
+    /* free leftover allocations and item structures, if any */
+    item = zone->first;
+    while (item != NULL) {
+        free(item->ptr);
+        next = item->next;
+        free(item);
+        item = next;
+        count++;
+    }
+
+    /* issue alerts about anything unexpected */
+    if (count || zone->total)
+        fprintf(stderr, "** %s: %lu bytes in %d blocks not freed\n",
+                prefix, zone->total, count);
+    if (zone->notlifo)
+        fprintf(stderr, "** %s: %d frees not LIFO\n", prefix, zone->notlifo);
+    if (zone->rogue)
+        fprintf(stderr, "** %s: %d frees not recognized\n",
+                prefix, zone->rogue);
+
+    /* free the zone and delete from the stream */
+    free(zone);
+    strm->opaque = Z_NULL;
+    strm->zalloc = Z_NULL;
+    strm->zfree = Z_NULL;
+}
+
+/* -- inflate test routines -- */
+
+/* Decode a hexadecimal string, set *len to length, in[] to the bytes.  This
+   decodes liberally, in that hex digits can be adjacent, in which case two in
+   a row writes a byte.  Or they can delimited by any non-hex character, where
+   the delimiters are ignored except when a single hex digit is followed by a
+   delimiter in which case that single digit writes a byte.  The returned
+   data is allocated and must eventually be freed.  NULL is returned if out of
+   memory.  If the length is not needed, then len can be NULL. */
+local unsigned char *h2b(const char *hex, unsigned *len)
+{
+    unsigned char *in;
+    unsigned next, val;
+
+    in = malloc((strlen(hex) + 1) >> 1);
+    if (in == NULL)
+        return NULL;
+    next = 0;
+    val = 1;
+    do {
+        if (*hex >= '0' && *hex <= '9')
+            val = (val << 4) + *hex - '0';
+        else if (*hex >= 'A' && *hex <= 'F')
+            val = (val << 4) + *hex - 'A' + 10;
+        else if (*hex >= 'a' && *hex <= 'f')
+            val = (val << 4) + *hex - 'a' + 10;
+        else if (val != 1 && val < 32)  /* one digit followed by delimiter */
+            val += 240;                 /* make it look like two digits */
+        if (val > 255) {                /* have two digits */
+            in[next++] = val & 0xff;    /* save the decoded byte */
+            val = 1;                    /* start over */
+        }
+    } while (*hex++);       /* go through the loop with the terminating null */
+    if (len != NULL)
+        *len = next;
+    in = reallocf(in, next);
+    return in;
+}
+
+/* generic inflate() run, where hex is the hexadecimal input data, what is the
+   text to include in an error message, step is how much input data to feed
+   inflate() on each call, or zero to feed it all, win is the window bits
+   parameter to inflateInit2(), len is the size of the output buffer, and err
+   is the error code expected from the first inflate() call (the second
+   inflate() call is expected to return Z_STREAM_END).  If win is 47, then
+   header information is collected with inflateGetHeader().  If a zlib stream
+   is looking for a dictionary, then an empty dictionary is provided.
+   inflate() is run until all of the input data is consumed. */
+local void inf(char *hex, char *what, unsigned step, int win, unsigned len,
+               int err)
+{
+    int ret;
+    unsigned have;
+    unsigned char *in, *out;
+    z_stream strm, copy;
+    gz_header head;
+
+    mem_setup(&strm);
+    strm.avail_in = 0;
+    strm.next_in = Z_NULL;
+    ret = inflateInit2(&strm, win);
+    if (ret != Z_OK) {
+        mem_done(&strm, what);
+        return;
+    }
+    out = malloc(len);                          assert(out != NULL);
+    if (win == 47) {
+        head.extra = out;
+        head.extra_max = len;
+        head.name = out;
+        head.name_max = len;
+        head.comment = out;
+        head.comm_max = len;
+        ret = inflateGetHeader(&strm, &head);   assert(ret == Z_OK);
+    }
+    in = h2b(hex, &have);                       assert(in != NULL);
+    if (step == 0 || step > have)
+        step = have;
+    strm.avail_in = step;
+    have -= step;
+    strm.next_in = in;
+    do {
+        strm.avail_out = len;
+        strm.next_out = out;
+        ret = inflate(&strm, Z_NO_FLUSH);       assert(err == 9 || ret == err);
+        if (ret != Z_OK && ret != Z_BUF_ERROR && ret != Z_NEED_DICT)
+            break;
+        if (ret == Z_NEED_DICT) {
+            ret = inflateSetDictionary(&strm, in, 1);
+                                                assert(ret == Z_DATA_ERROR);
+            mem_limit(&strm, 1);
+            ret = inflateSetDictionary(&strm, out, 0);
+                                                assert(ret == Z_MEM_ERROR);
+            mem_limit(&strm, 0);
+            ((struct inflate_state *)strm.state)->mode = DICT;
+            ret = inflateSetDictionary(&strm, out, 0);
+                                                assert(ret == Z_OK);
+            ret = inflate(&strm, Z_NO_FLUSH);   assert(ret == Z_BUF_ERROR);
+        }
+        ret = inflateCopy(&copy, &strm);        assert(ret == Z_OK);
+        ret = inflateEnd(&copy);                assert(ret == Z_OK);
+        err = 9;                        /* don't care next time around */
+        have += strm.avail_in;
+        strm.avail_in = step > have ? have : step;
+        have -= strm.avail_in;
+    } while (strm.avail_in);
+    free(in);
+    free(out);
+    ret = inflateReset2(&strm, -8);             assert(ret == Z_OK);
+    ret = inflateEnd(&strm);                    assert(ret == Z_OK);
+    mem_done(&strm, what);
+}
+
+/* cover all of the lines in inflate.c up to inflate() */
+local void cover_support(void)
+{
+    int ret;
+    z_stream strm;
+
+    mem_setup(&strm);
+    strm.avail_in = 0;
+    strm.next_in = Z_NULL;
+    ret = inflateInit(&strm);                   assert(ret == Z_OK);
+    mem_used(&strm, "inflate init");
+    ret = inflatePrime(&strm, 5, 31);           assert(ret == Z_OK);
+    ret = inflatePrime(&strm, -1, 0);           assert(ret == Z_OK);
+    ret = inflateSetDictionary(&strm, Z_NULL, 0);
+                                                assert(ret == Z_STREAM_ERROR);
+    ret = inflateEnd(&strm);                    assert(ret == Z_OK);
+    mem_done(&strm, "prime");
+
+    inf("63 0", "force window allocation", 0, -15, 1, Z_OK);
+    inf("63 18 5", "force window replacement", 0, -8, 259, Z_OK);
+    inf("63 18 68 30 d0 0 0", "force split window update", 4, -8, 259, Z_OK);
+    inf("3 0", "use fixed blocks", 0, -15, 1, Z_STREAM_END);
+    inf("", "bad window size", 0, 1, 0, Z_STREAM_ERROR);
+
+    mem_setup(&strm);
+    strm.avail_in = 0;
+    strm.next_in = Z_NULL;
+    ret = inflateInit_(&strm, ZLIB_VERSION - 1, (int)sizeof(z_stream));
+                                                assert(ret == Z_VERSION_ERROR);
+    mem_done(&strm, "wrong version");
+
+    strm.avail_in = 0;
+    strm.next_in = Z_NULL;
+    ret = inflateInit(&strm);                   assert(ret == Z_OK);
+    ret = inflateEnd(&strm);                    assert(ret == Z_OK);
+    fputs("inflate built-in memory routines\n", stderr);
+}
+
+/* cover all inflate() header and trailer cases and code after inflate() */
+local void cover_wrap(void)
+{
+    int ret;
+    z_stream strm, copy;
+    unsigned char dict[257];
+
+    ret = inflate(Z_NULL, 0);                   assert(ret == Z_STREAM_ERROR);
+    ret = inflateEnd(Z_NULL);                   assert(ret == Z_STREAM_ERROR);
+    ret = inflateCopy(Z_NULL, Z_NULL);          assert(ret == Z_STREAM_ERROR);
+    fputs("inflate bad parameters\n", stderr);
+
+    inf("1f 8b 0 0", "bad gzip method", 0, 31, 0, Z_DATA_ERROR);
+    inf("1f 8b 8 80", "bad gzip flags", 0, 31, 0, Z_DATA_ERROR);
+    inf("77 85", "bad zlib method", 0, 15, 0, Z_DATA_ERROR);
+    inf("8 99", "set window size from header", 0, 0, 0, Z_OK);
+    inf("78 9c", "bad zlib window size", 0, 8, 0, Z_DATA_ERROR);
+    inf("78 9c 63 0 0 0 1 0 1", "check adler32", 0, 15, 1, Z_STREAM_END);
+    inf("1f 8b 8 1e 0 0 0 0 0 0 1 0 0 0 0 0 0", "bad header crc", 0, 47, 1,
+        Z_DATA_ERROR);
+    inf("1f 8b 8 2 0 0 0 0 0 0 1d 26 3 0 0 0 0 0 0 0 0 0", "check gzip length",
+        0, 47, 0, Z_STREAM_END);
+    inf("78 90", "bad zlib header check", 0, 47, 0, Z_DATA_ERROR);
+    inf("8 b8 0 0 0 1", "need dictionary", 0, 8, 0, Z_NEED_DICT);
+    inf("78 9c 63 0", "compute adler32", 0, 15, 1, Z_OK);
+
+    mem_setup(&strm);
+    strm.avail_in = 0;
+    strm.next_in = Z_NULL;
+    ret = inflateInit2(&strm, -8);
+    strm.avail_in = 2;
+    strm.next_in = (void *)"\x63";
+    strm.avail_out = 1;
+    strm.next_out = (void *)&ret;
+    mem_limit(&strm, 1);
+    ret = inflate(&strm, Z_NO_FLUSH);           assert(ret == Z_MEM_ERROR);
+    ret = inflate(&strm, Z_NO_FLUSH);           assert(ret == Z_MEM_ERROR);
+    mem_limit(&strm, 0);
+    memset(dict, 0, 257);
+    ret = inflateSetDictionary(&strm, dict, 257);
+                                                assert(ret == Z_OK);
+    mem_limit(&strm, (sizeof(struct inflate_state) << 1) + 256);
+    ret = inflatePrime(&strm, 16, 0);           assert(ret == Z_OK);
+    strm.avail_in = 2;
+    strm.next_in = (void *)"\x80";
+    ret = inflateSync(&strm);                   assert(ret == Z_DATA_ERROR);
+    ret = inflate(&strm, Z_NO_FLUSH);           assert(ret == Z_STREAM_ERROR);
+    strm.avail_in = 4;
+    strm.next_in = (void *)"\0\0\xff\xff";
+    ret = inflateSync(&strm);                   assert(ret == Z_OK);
+    (void)inflateSyncPoint(&strm);
+    ret = inflateCopy(&copy, &strm);            assert(ret == Z_MEM_ERROR);
+    mem_limit(&strm, 0);
+    ret = inflateUndermine(&strm, 1);           assert(ret == Z_DATA_ERROR);
+    (void)inflateMark(&strm);
+    ret = inflateEnd(&strm);                    assert(ret == Z_OK);
+    mem_done(&strm, "miscellaneous, force memory errors");
+}
+
+/* input and output functions for inflateBack() */
+local unsigned pull(void *desc, unsigned char **buf)
+{
+    static unsigned int next = 0;
+    static unsigned char dat[] = {0x63, 0, 2, 0};
+    struct inflate_state *state;
+
+    if (desc == Z_NULL) {
+        next = 0;
+        return 0;   /* no input (already provided at next_in) */
+    }
+    state = (void *)((z_stream *)desc)->state;
+    if (state != Z_NULL)
+        state->mode = SYNC;     /* force an otherwise impossible situation */
+    return next < sizeof(dat) ? (*buf = dat + next++, 1) : 0;
+}
+
+local int push(void *desc, unsigned char *buf, unsigned len)
+{
+    buf += len;
+    return desc != Z_NULL;      /* force error if desc not null */
+}
+
+/* cover inflateBack() up to common deflate data cases and after those */
+local void cover_back(void)
+{
+    int ret;
+    z_stream strm;
+    unsigned char win[32768];
+
+    ret = inflateBackInit_(Z_NULL, 0, win, 0, 0);
+                                                assert(ret == Z_VERSION_ERROR);
+    ret = inflateBackInit(Z_NULL, 0, win);      assert(ret == Z_STREAM_ERROR);
+    ret = inflateBack(Z_NULL, Z_NULL, Z_NULL, Z_NULL, Z_NULL);
+                                                assert(ret == Z_STREAM_ERROR);
+    ret = inflateBackEnd(Z_NULL);               assert(ret == Z_STREAM_ERROR);
+    fputs("inflateBack bad parameters\n", stderr);
+
+    mem_setup(&strm);
+    ret = inflateBackInit(&strm, 15, win);      assert(ret == Z_OK);
+    strm.avail_in = 2;
+    strm.next_in = (void *)"\x03";
+    ret = inflateBack(&strm, pull, Z_NULL, push, Z_NULL);
+                                                assert(ret == Z_STREAM_END);
+        /* force output error */
+    strm.avail_in = 3;
+    strm.next_in = (void *)"\x63\x00";
+    ret = inflateBack(&strm, pull, Z_NULL, push, &strm);
+                                                assert(ret == Z_BUF_ERROR);
+        /* force mode error by mucking with state */
+    ret = inflateBack(&strm, pull, &strm, push, Z_NULL);
+                                                assert(ret == Z_STREAM_ERROR);
+    ret = inflateBackEnd(&strm);                assert(ret == Z_OK);
+    mem_done(&strm, "inflateBack bad state");
+
+    ret = inflateBackInit(&strm, 15, win);      assert(ret == Z_OK);
+    ret = inflateBackEnd(&strm);                assert(ret == Z_OK);
+    fputs("inflateBack built-in memory routines\n", stderr);
+}
+
+/* do a raw inflate of data in hexadecimal with both inflate and inflateBack */
+local int try(char *hex, char *id, int err)
+{
+    int ret;
+    unsigned len, size;
+    unsigned char *in, *out, *win;
+    char *prefix;
+    z_stream strm;
+
+    /* convert to hex */
+    in = h2b(hex, &len);
+    assert(in != NULL);
+
+    /* allocate work areas */
+    size = len << 3;
+    out = malloc(size);
+    assert(out != NULL);
+    win = malloc(32768);
+    assert(win != NULL);
+    prefix = malloc(strlen(id) + 6);
+    assert(prefix != NULL);
+
+    /* first with inflate */
+    strcpy(prefix, id);
+    strcat(prefix, "-late");
+    mem_setup(&strm);
+    strm.avail_in = 0;
+    strm.next_in = Z_NULL;
+    ret = inflateInit2(&strm, err < 0 ? 47 : -15);
+    assert(ret == Z_OK);
+    strm.avail_in = len;
+    strm.next_in = in;
+    do {
+        strm.avail_out = size;
+        strm.next_out = out;
+        ret = inflate(&strm, Z_TREES);
+        assert(ret != Z_STREAM_ERROR && ret != Z_MEM_ERROR);
+        if (ret == Z_DATA_ERROR || ret == Z_NEED_DICT)
+            break;
+    } while (strm.avail_in || strm.avail_out == 0);
+    if (err) {
+        assert(ret == Z_DATA_ERROR);
+        assert(strcmp(id, strm.msg) == 0);
+    }
+    inflateEnd(&strm);
+    mem_done(&strm, prefix);
+
+    /* then with inflateBack */
+    if (err >= 0) {
+        strcpy(prefix, id);
+        strcat(prefix, "-back");
+        mem_setup(&strm);
+        ret = inflateBackInit(&strm, 15, win);
+        assert(ret == Z_OK);
+        strm.avail_in = len;
+        strm.next_in = in;
+        ret = inflateBack(&strm, pull, Z_NULL, push, Z_NULL);
+        assert(ret != Z_STREAM_ERROR);
+        if (err) {
+            assert(ret == Z_DATA_ERROR);
+            assert(strcmp(id, strm.msg) == 0);
+        }
+        inflateBackEnd(&strm);
+        mem_done(&strm, prefix);
+    }
+
+    /* clean up */
+    free(prefix);
+    free(win);
+    free(out);
+    free(in);
+    return ret;
+}
+
+/* cover deflate data cases in both inflate() and inflateBack() */
+local void cover_inflate(void)
+{
+    try("0 0 0 0 0", "invalid stored block lengths", 1);
+    try("3 0", "fixed", 0);
+    try("6", "invalid block type", 1);
+    try("1 1 0 fe ff 0", "stored", 0);
+    try("fc 0 0", "too many length or distance symbols", 1);
+    try("4 0 fe ff", "invalid code lengths set", 1);
+    try("4 0 24 49 0", "invalid bit length repeat", 1);
+    try("4 0 24 e9 ff ff", "invalid bit length repeat", 1);
+    try("4 0 24 e9 ff 6d", "invalid code -- missing end-of-block", 1);
+    try("4 80 49 92 24 49 92 24 71 ff ff 93 11 0",
+        "invalid literal/lengths set", 1);
+    try("4 80 49 92 24 49 92 24 f b4 ff ff c3 84", "invalid distances set", 1);
+    try("4 c0 81 8 0 0 0 0 20 7f eb b 0 0", "invalid literal/length code", 1);
+    try("2 7e ff ff", "invalid distance code", 1);
+    try("c c0 81 0 0 0 0 0 90 ff 6b 4 0", "invalid distance too far back", 1);
+
+    /* also trailer mismatch just in inflate() */
+    try("1f 8b 8 0 0 0 0 0 0 0 3 0 0 0 0 1", "incorrect data check", -1);
+    try("1f 8b 8 0 0 0 0 0 0 0 3 0 0 0 0 0 0 0 0 1",
+        "incorrect length check", -1);
+    try("5 c0 21 d 0 0 0 80 b0 fe 6d 2f 91 6c", "pull 17", 0);
+    try("5 e0 81 91 24 cb b2 2c 49 e2 f 2e 8b 9a 47 56 9f fb fe ec d2 ff 1f",
+        "long code", 0);
+    try("ed c0 1 1 0 0 0 40 20 ff 57 1b 42 2c 4f", "length extra", 0);
+    try("ed cf c1 b1 2c 47 10 c4 30 fa 6f 35 1d 1 82 59 3d fb be 2e 2a fc f c",
+        "long distance and extra", 0);
+    try("ed c0 81 0 0 0 0 80 a0 fd a9 17 a9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 "
+        "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 6", "window end", 0);
+    inf("2 8 20 80 0 3 0", "inflate_fast TYPE return", 0, -15, 258,
+        Z_STREAM_END);
+    inf("63 18 5 40 c 0", "window wrap", 3, -8, 300, Z_OK);
+}
+
+/* cover remaining lines in inftrees.c */
+local void cover_trees(void)
+{
+    int ret;
+    unsigned bits;
+    unsigned short lens[16], work[16];
+    code *next, table[ENOUGH_DISTS];
+
+    /* we need to call inflate_table() directly in order to manifest not-
+       enough errors, since zlib insures that enough is always enough */
+    for (bits = 0; bits < 15; bits++)
+        lens[bits] = (unsigned short)(bits + 1);
+    lens[15] = 15;
+    next = table;
+    bits = 15;
+    ret = inflate_table(DISTS, lens, 16, &next, &bits, work);
+                                                assert(ret == 1);
+    next = table;
+    bits = 1;
+    ret = inflate_table(DISTS, lens, 16, &next, &bits, work);
+                                                assert(ret == 1);
+    fputs("inflate_table not enough errors\n", stderr);
+}
+
+/* cover remaining inffast.c decoding and window copying */
+local void cover_fast(void)
+{
+    inf("e5 e0 81 ad 6d cb b2 2c c9 01 1e 59 63 ae 7d ee fb 4d fd b5 35 41 68"
+        " ff 7f 0f 0 0 0", "fast length extra bits", 0, -8, 258, Z_DATA_ERROR);
+    inf("25 fd 81 b5 6d 59 b6 6a 49 ea af 35 6 34 eb 8c b9 f6 b9 1e ef 67 49"
+        " 50 fe ff ff 3f 0 0", "fast distance extra bits", 0, -8, 258,
+        Z_DATA_ERROR);
+    inf("3 7e 0 0 0 0 0", "fast invalid distance code", 0, -8, 258,
+        Z_DATA_ERROR);
+    inf("1b 7 0 0 0 0 0", "fast invalid literal/length code", 0, -8, 258,
+        Z_DATA_ERROR);
+    inf("d c7 1 ae eb 38 c 4 41 a0 87 72 de df fb 1f b8 36 b1 38 5d ff ff 0",
+        "fast 2nd level codes and too far back", 0, -8, 258, Z_DATA_ERROR);
+    inf("63 18 5 8c 10 8 0 0 0 0", "very common case", 0, -8, 259, Z_OK);
+    inf("63 60 60 18 c9 0 8 18 18 18 26 c0 28 0 29 0 0 0",
+        "contiguous and wrap around window", 6, -8, 259, Z_OK);
+    inf("63 0 3 0 0 0 0 0", "copy direct from output", 0, -8, 259,
+        Z_STREAM_END);
+}
+
+int main(void)
+{
+    fprintf(stderr, "%s\n", zlibVersion());
+    cover_support();
+    cover_wrap();
+    cover_back();
+    cover_inflate();
+    cover_trees();
+    cover_fast();
+    return 0;
+}

test/minigzip.c

@@ -1,5 +1,5 @@
 /* minigzip.c -- simulate gzip using the zlib compression library
- * Copyright (C) 1995-2006, 2010 Jean-loup Gailly.
+ * Copyright (C) 1995-2006, 2010, 2011 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -32,6 +32,9 @@
 #if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
 #  include <fcntl.h>
 #  include <io.h>
+#  ifdef UNDER_CE
+#    include <stdlib.h>
+#  endif
 #  define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
 #else
 #  define SET_BINARY_MODE(file)
@@ -50,11 +53,13 @@
 #  include <unix.h> /* for fileno */
 #endif
 
+#if !defined(Z_HAVE_UNISTD_H) && !defined(_LARGEFILE64_SOURCE)
 #ifndef WIN32 /* unlink already in stdio.h for WIN32 */
   extern int unlink OF((const char *));
 #endif
+#endif
 
-#if defined(UNDER_CE) && defined(NO_ERRNO_H)
+#if defined(UNDER_CE)
 #  include <windows.h>
 #  define perror(s) pwinerror(s)
 
@@ -116,7 +121,7 @@ static void pwinerror (s)
         fprintf(stderr, "%s\n", strwinerror(GetLastError ()));
 }
 
-#endif /* UNDER_CE && NO_ERRNO_H */
+#endif /* UNDER_CE */
 
 #ifndef GZ_SUFFIX
 #  define GZ_SUFFIX ".gz"
@@ -133,6 +138,197 @@ static void pwinerror (s)
 #  define local
 #endif
 
+#ifdef Z_SOLO
+/* for Z_SOLO, create simplified gz* functions using deflate and inflate */
+
+#if defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)
+#  include <unistd.h>       /* for unlink() */
+#endif
+
+void *myalloc OF((void *, unsigned, unsigned));
+void myfree OF((void *, void *));
+
+void *myalloc(q, n, m)
+    void *q;
+    unsigned n, m;
+{
+    q = Z_NULL;
+    return calloc(n, m);
+}
+
+void myfree(q, p)
+    void *q, *p;
+{
+    q = Z_NULL;
+    free(p);
+}
+
+typedef struct gzFile_s {
+    FILE *file;
+    int write;
+    int err;
+    char *msg;
+    z_stream strm;
+} *gzFile;
+
+gzFile gzopen OF((const char *, const char *));
+gzFile gzdopen OF((int, const char *));
+gzFile gz_open OF((const char *, int, const char *));
+
+gzFile gzopen(path, mode)
+const char *path;
+const char *mode;
+{
+    return gz_open(path, -1, mode);
+}
+
+gzFile gzdopen(fd, mode)
+int fd;
+const char *mode;
+{
+    return gz_open(NULL, fd, mode);
+}
+
+gzFile gz_open(path, fd, mode)
+    const char *path;
+    int fd;
+    const char *mode;
+{
+    gzFile gz;
+    int ret;
+
+    gz = malloc(sizeof(gzFile));
+    if (gz == NULL)
+        return NULL;
+    gz->write = strchr(mode, 'w') != NULL;
+    gz->strm.zalloc = myalloc;
+    gz->strm.zfree = myfree;
+    gz->strm.opaque = Z_NULL;
+    if (gz->write)
+        ret = deflateInit2(&(gz->strm), -1, 8, 15 + 16, 8, 0);
+    else {
+        gz->strm.next_in = 0;
+        gz->strm.avail_in = Z_NULL;
+        ret = inflateInit2(&(gz->strm), 15 + 16);
+    }
+    if (ret != Z_OK) {
+        free(gz);
+        return NULL;
+    }
+    gz->file = path == NULL ? fdopen(fd, gz->write ? "wb" : "rb") :
+                              fopen(path, gz->write ? "wb" : "rb");
+    if (gz->file == NULL) {
+        gz->write ? deflateEnd(&(gz->strm)) : inflateEnd(&(gz->strm));
+        free(gz);
+        return NULL;
+    }
+    gz->err = 0;
+    gz->msg = "";
+    return gz;
+}
+
+int gzwrite OF((gzFile, const void *, unsigned));
+
+int gzwrite(gz, buf, len)
+    gzFile gz;
+    const void *buf;
+    unsigned len;
+{
+    z_stream *strm;
+    unsigned char out[BUFLEN];
+
+    if (gz == NULL || !gz->write)
+        return 0;
+    strm = &(gz->strm);
+    strm->next_in = (void *)buf;
+    strm->avail_in = len;
+    do {
+        strm->next_out = out;
+        strm->avail_out = BUFLEN;
+        (void)deflate(strm, Z_NO_FLUSH);
+        fwrite(out, 1, BUFLEN - strm->avail_out, gz->file);
+    } while (strm->avail_out == 0);
+    return len;
+}
+
+int gzread OF((gzFile, void *, unsigned));
+
+int gzread(gz, buf, len)
+    gzFile gz;
+    void *buf;
+    unsigned len;
+{
+    int ret;
+    unsigned got;
+    unsigned char in[1];
+    z_stream *strm;
+
+    if (gz == NULL || gz->write)
+        return 0;
+    if (gz->err)
+        return 0;
+    strm = &(gz->strm);
+    strm->next_out = (void *)buf;
+    strm->avail_out = len;
+    do {
+        got = fread(in, 1, 1, gz->file);
+        if (got == 0)
+            break;
+        strm->next_in = in;
+        strm->avail_in = 1;
+        ret = inflate(strm, Z_NO_FLUSH);
+        if (ret == Z_DATA_ERROR) {
+            gz->err = Z_DATA_ERROR;
+            gz->msg = strm->msg;
+            return 0;
+        }
+        if (ret == Z_STREAM_END)
+            inflateReset(strm);
+    } while (strm->avail_out);
+    return len - strm->avail_out;
+}
+
+int gzclose OF((gzFile));
+
+int gzclose(gz)
+    gzFile gz;
+{
+    z_stream *strm;
+    unsigned char out[BUFLEN];
+
+    if (gz == NULL)
+        return Z_STREAM_ERROR;
+    strm = &(gz->strm);
+    if (gz->write) {
+        strm->next_in = Z_NULL;
+        strm->avail_in = 0;
+        do {
+            strm->next_out = out;
+            strm->avail_out = BUFLEN;
+            (void)deflate(strm, Z_FINISH);
+            fwrite(out, 1, BUFLEN - strm->avail_out, gz->file);
+        } while (strm->avail_out == 0);
+        deflateEnd(strm);
+    }
+    else
+        inflateEnd(strm);
+    fclose(gz->file);
+    free(gz);
+    return Z_OK;
+}
+
+const char *gzerror OF((gzFile, int *));
+
+const char *gzerror(gz, err)
+    gzFile gz;
+    int *err;
+{
+    *err = gz->err;
+    return gz->msg;
+}
+
+#endif
+
 char *prog;
 
 void error            OF((const char *msg));

treebuild.xml

@@ -1,6 +1,6 @@
 <?xml version="1.0" ?>
-<package name="zlib" version="1.2.4">
+<package name="zlib" version="1.2.5.2">
-    <library name="zlib" dlversion="1.2.4" dlname="z">
+    <library name="zlib" dlversion="1.2.5.2" dlname="z">
 	<property name="description"> zip compression library </property>
 	<property name="include-target-dir" value="$(@PACKAGE/install-includedir)" />
 

trees.c

@@ -1,5 +1,5 @@
 /* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995-2009 Jean-loup Gailly
+ * Copyright (C) 1995-2010 Jean-loup Gailly
  * detect_data_type() function provided freely by Cosmin Truta, 2006
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
@@ -351,13 +351,14 @@ void gen_trees_header()
                 static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5));
     }
 
-    fprintf(header, "const uch _dist_code[DIST_CODE_LEN] = {\n");
+    fprintf(header, "const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = {\n");
     for (i = 0; i < DIST_CODE_LEN; i++) {
         fprintf(header, "%2u%s", _dist_code[i],
                 SEPARATOR(i, DIST_CODE_LEN-1, 20));
     }
 
-    fprintf(header, "const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
+    fprintf(header,
+        "const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
     for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) {
         fprintf(header, "%2u%s", _length_code[i],
                 SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20));
@@ -382,7 +383,7 @@ void gen_trees_header()
 /* ===========================================================================
  * Initialize the tree data structures for a new zlib stream.
  */
-void _tr_init(s)
+void ZLIB_INTERNAL _tr_init(s)
     deflate_state *s;
 {
     tr_static_init();
@@ -867,7 +868,7 @@ local void send_all_trees(s, lcodes, dcodes, blcodes)
 /* ===========================================================================
  * Send a stored block
  */
-void _tr_stored_block(s, buf, stored_len, last)
+void ZLIB_INTERNAL _tr_stored_block(s, buf, stored_len, last)
     deflate_state *s;
     charf *buf;       /* input block */
     ulg stored_len;   /* length of input block */
@@ -892,7 +893,7 @@ void _tr_stored_block(s, buf, stored_len, last)
  * To simplify the code, we assume the worst case of last real code encoded
  * on one bit only.
  */
-void _tr_align(s)
+void ZLIB_INTERNAL _tr_align(s)
     deflate_state *s;
 {
     send_bits(s, STATIC_TREES<<1, 3);
@@ -921,7 +922,7 @@ void _tr_align(s)
  * Determine the best encoding for the current block: dynamic trees, static
  * trees or store, and output the encoded block to the zip file.
  */
-void _tr_flush_block(s, buf, stored_len, last)
+void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
     deflate_state *s;
     charf *buf;       /* input block, or NULL if too old */
     ulg stored_len;   /* length of input block */
@@ -1022,7 +1023,7 @@ void _tr_flush_block(s, buf, stored_len, last)
  * Save the match info and tally the frequency counts. Return true if
  * the current block must be flushed.
  */
-int _tr_tally (s, dist, lc)
+int ZLIB_INTERNAL _tr_tally (s, dist, lc)
     deflate_state *s;
     unsigned dist;  /* distance of matched string */
     unsigned lc;    /* match length-MIN_MATCH or unmatched char (if dist==0) */

trees.h

@@ -70,7 +70,7 @@ local const ct_data static_dtree[D_CODES] = {
 {{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}}
 };
 
-const uch _dist_code[DIST_CODE_LEN] = {
+const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = {
  0,  1,  2,  3,  4,  4,  5,  5,  6,  6,  6,  6,  7,  7,  7,  7,  8,  8,  8,  8,
  8,  8,  8,  8,  9,  9,  9,  9,  9,  9,  9,  9, 10, 10, 10, 10, 10, 10, 10, 10,
 10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
@@ -99,7 +99,7 @@ const uch _dist_code[DIST_CODE_LEN] = {
 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29
 };
 
-const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {
+const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= {
  0,  1,  2,  3,  4,  5,  6,  7,  8,  8,  9,  9, 10, 10, 11, 11, 12, 12, 12, 12,
 13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16,
 17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19,

win32/Makefile.bor

@@ -74,9 +74,9 @@ uncompr.obj: uncompr.c zlib.h zconf.h
 
 zutil.obj: zutil.c zutil.h zlib.h zconf.h
 
-example.obj: example.c zlib.h zconf.h
+example.obj: test/example.c zlib.h zconf.h
 
-minigzip.obj: minigzip.c zlib.h zconf.h
+minigzip.obj: test/minigzip.c zlib.h zconf.h
 
 
 # For the sake of the old Borland make,

win32/Makefile.gcc

@@ -25,34 +25,41 @@
 
 STATICLIB = libz.a
 SHAREDLIB = zlib1.dll
-IMPLIB    = libzdll.a
+IMPLIB    = libz.dll.a
+
+#
+# Set to 1 if shared object needs to be installed
+#
+SHARED_MODE=0
 
 #LOC = -DASMV
 #LOC = -DDEBUG -g
 
-CC = gcc
+PREFIX =
+CC = $(PREFIX)gcc
 CFLAGS = $(LOC) -O3 -Wall
+EXTRA_CFLAGS = -DNO_VIZ
 
 AS = $(CC)
 ASFLAGS = $(LOC) -Wall
 
 LD = $(CC)
-LDFLAGS = $(LOC) -s
+LDFLAGS = $(LOC)
 
-AR = ar
+AR = $(PREFIX)ar
 ARFLAGS = rcs
 
-RC = windres
+RC = $(PREFIX)windres
 RCFLAGS = --define GCC_WINDRES
 
-STRIP = strip
+STRIP = $(PREFIX)strip
 
 CP = cp -fp
 # If GNU install is available, replace $(CP) with install.
 INSTALL = $(CP)
 RM = rm -f
 
-prefix = /usr/local
+prefix ?= /usr/local
 exec_prefix = $(prefix)
 
 OBJS = adler32.o compress.o crc32.o deflate.o gzclose.o gzlib.o gzread.o \
@@ -70,7 +77,7 @@ testdll: example_d.exe minigzip_d.exe
 	echo hello world | ./minigzip_d | ./minigzip_d -d
 
 .c.o:
-	$(CC) $(CFLAGS) -c -o $@ $<
+	$(CC) $(CFLAGS) $(EXTRA_CFLAGS) -c -o $@ $<
 
 .S.o:
 	$(AS) $(ASFLAGS) -c -o $@ $<
@@ -81,43 +88,62 @@ $(STATICLIB): $(OBJS) $(OBJA)
 $(IMPLIB): $(SHAREDLIB)
 
 $(SHAREDLIB): win32/zlib.def $(OBJS) $(OBJA) zlibrc.o
-	$(CC) -shared -Wl,--out-implib,$(IMPLIB) \
+	$(CC) -shared -Wl,--out-implib,$(IMPLIB) $(LDFLAGS) \
 	-o $@ win32/zlib.def $(OBJS) $(OBJA) zlibrc.o
 	$(STRIP) $@
 
 example.exe: example.o $(STATICLIB)
 	$(LD) $(LDFLAGS) -o $@ example.o $(STATICLIB)
+	$(STRIP) $@
 
 minigzip.exe: minigzip.o $(STATICLIB)
 	$(LD) $(LDFLAGS) -o $@ minigzip.o $(STATICLIB)
+	$(STRIP) $@
 
 example_d.exe: example.o $(IMPLIB)
 	$(LD) $(LDFLAGS) -o $@ example.o $(IMPLIB)
+	$(STRIP) $@
 
 minigzip_d.exe: minigzip.o $(IMPLIB)
 	$(LD) $(LDFLAGS) -o $@ minigzip.o $(IMPLIB)
+	$(STRIP) $@
 
 zlibrc.o: win32/zlib1.rc
 	$(RC) $(RCFLAGS) -o $@ win32/zlib1.rc
 
 
-# INCLUDE_PATH and LIBRARY_PATH must be set.
+# BINARY_PATH, INCLUDE_PATH and LIBRARY_PATH must be set.
 
 .PHONY: install uninstall clean
 
-install: zlib.h zconf.h $(LIB)
+install: zlib.h zconf.h $(STATICLIB) $(IMPLIB)
-	-@if not exist $(INCLUDE_PATH)/nul mkdir $(INCLUDE_PATH)
+	-@mkdir -p $(INCLUDE_PATH)
-	-@if not exist $(LIBRARY_PATH)/nul mkdir $(LIBRARY_PATH)
+	-@mkdir -p $(LIBRARY_PATH) $(LIBRARY_PATH)/pkgconfig
+	-if [ "$(SHARED_MODE)" = "1" ]; then \
+		mkdir -p $(BINARY_PATH); \
+		$(INSTALL) $(SHAREDLIB) $(BINARY_PATH); \
+		$(INSTALL) $(IMPLIB) $(LIBRARY_PATH); \
+	fi
 	-$(INSTALL) zlib.h $(INCLUDE_PATH)
 	-$(INSTALL) zconf.h $(INCLUDE_PATH)
 	-$(INSTALL) $(STATICLIB) $(LIBRARY_PATH)
-	-$(INSTALL) $(IMPLIB) $(LIBRARY_PATH)
+	sed \
+		-e 's|@prefix@|${prefix}|g' \
+		-e 's|@exec_prefix@|${exec_prefix}|g' \
+		-e 's|@libdir@|$(LIBRARY_PATH)|g' \
+		-e 's|@sharedlibdir@|$(LIBRARY_PATH)|g' \
+		-e 's|@includedir@|$(INCLUDE_PATH)|g' \
+		-e 's|@VERSION@|'`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' zlib.h`'|g' \
+		zlib.pc.in > $(LIBRARY_PATH)/pkgconfig/zlib.pc
 
 uninstall:
+	-if [ "$(SHARED_MODE)" = "1" ]; then \
+		$(RM) $(BINARY_PATH)/$(SHAREDLIB); \
+		$(RM) $(LIBRARY_PATH)/$(IMPLIB); \
+	fi
 	-$(RM) $(INCLUDE_PATH)/zlib.h
 	-$(RM) $(INCLUDE_PATH)/zconf.h
 	-$(RM) $(LIBRARY_PATH)/$(STATICLIB)
-	-$(RM) $(LIBRARY_PATH)/$(IMPLIB)
 
 clean:
 	-$(RM) $(STATICLIB)

win32/Makefile.gcc.old

@@ -1,140 +0,0 @@
-# Makefile for zlib, derived from Makefile.dj2.
-# Modified for mingw32 by C. Spieler, 6/16/98.
-# Updated for zlib 1.2.x by Christian Spieler and Cosmin Truta, Mar-2003.
-# Last updated: 1-Aug-2003.
-# Tested under Cygwin and MinGW.
-
-# Copyright (C) 1995-2003 Jean-loup Gailly.
-# For conditions of distribution and use, see copyright notice in zlib.h
-
-# To compile, or to compile and test, type:
-#
-#   make -fmakefile.gcc;  make test testdll -fmakefile.gcc
-#
-# To use the asm code, type:
-#   cp contrib/asm?86/match.S ./match.S
-#   make LOC=-DASMV OBJA=match.o -fmakefile.gcc
-#
-# To install libz.a, zconf.h and zlib.h in the system directories, type:
-#
-#   make install -fmakefile.gcc
-
-# Note:
-# If the platform is *not* MinGW (e.g. it is Cygwin or UWIN),
-# the DLL name should be changed from "zlib1.dll".
-
-STATICLIB = libz.a
-SHAREDLIB = zlib1.dll
-IMPLIB    = libzdll.a
-
-#LOC = -DASMV
-#LOC = -DDEBUG -g
-
-CC = gcc
-CFLAGS = $(LOC) -O3 -Wall
-
-AS = $(CC)
-ASFLAGS = $(LOC) -Wall
-
-LD = $(CC)
-LDFLAGS = $(LOC) -s
-
-AR = ar
-ARFLAGS = rcs
-
-RC = windres
-RCFLAGS = --define GCC_WINDRES
-
-CP = cp -fp
-# If GNU install is available, replace $(CP) with install.
-INSTALL = $(CP)
-RM = rm -f
-
-prefix = /usr/local
-exec_prefix = $(prefix)
-
-OBJS = adler32.o compress.o crc32.o deflate.o infback.o \
-       inffast.o inflate.o inftrees.o trees.o uncompr.o zutil.o
-OBJA =
-
-all: $(STATICLIB) $(SHAREDLIB) $(IMPLIB) example minigzip example_d minigzip_d
-
-test: example minigzip
-	./example
-	echo hello world | ./minigzip | ./minigzip -d
-
-testdll: example_d minigzip_d
-	./example_d
-	echo hello world | ./minigzip_d | ./minigzip_d -d
-
-.c.o:
-	$(CC) $(CFLAGS) -c -o $@ $<
-
-.S.o:
-	$(AS) $(ASFLAGS) -c -o $@ $<
-
-$(STATICLIB): $(OBJS) $(OBJA)
-	$(AR) $(ARFLAGS) $@ $(OBJS) $(OBJA)
-
-$(IMPLIB): $(SHAREDLIB)
-
-$(SHAREDLIB): win32/zlib.def $(OBJS) $(OBJA) zlibrc.o
-	dllwrap --driver-name $(CC) --def win32/zlib.def \
-	  --implib $(IMPLIB) -o $@ $(OBJS) $(OBJA) zlibrc.o
-	strip $@
-
-example: example.o $(STATICLIB)
-	$(LD) $(LDFLAGS) -o $@ example.o $(STATICLIB)
-
-minigzip: minigzip.o $(STATICLIB)
-	$(LD) $(LDFLAGS) -o $@ minigzip.o $(STATICLIB)
-
-example_d: example.o $(IMPLIB)
-	$(LD) $(LDFLAGS) -o $@ example.o $(IMPLIB)
-
-minigzip_d: minigzip.o $(IMPLIB)
-	$(LD) $(LDFLAGS) -o $@ minigzip.o $(IMPLIB)
-
-zlibrc.o: win32/zlib1.rc
-	$(RC) $(RCFLAGS) -o $@ win32/zlib1.rc
-
-
-# INCLUDE_PATH and LIBRARY_PATH must be set.
-
-.PHONY: install uninstall clean
-
-install: zlib.h zconf.h $(LIB)
-	-@if not exist $(INCLUDE_PATH)/nul mkdir $(INCLUDE_PATH)
-	-@if not exist $(LIBRARY_PATH)/nul mkdir $(LIBRARY_PATH)
-	-$(INSTALL) zlib.h $(INCLUDE_PATH)
-	-$(INSTALL) zconf.h $(INCLUDE_PATH)
-	-$(INSTALL) $(STATICLIB) $(LIBRARY_PATH)
-	-$(INSTALL) $(IMPLIB) $(LIBRARY_PATH)
-
-uninstall:
-	-$(RM) $(INCLUDE_PATH)/zlib.h
-	-$(RM) $(INCLUDE_PATH)/zconf.h
-	-$(RM) $(LIBRARY_PATH)/$(STATICLIB)
-	-$(RM) $(LIBRARY_PATH)/$(IMPLIB)
-
-clean:
-	-$(RM) $(STATICLIB)
-	-$(RM) $(SHAREDLIB)
-	-$(RM) $(IMPLIB)
-	-$(RM) *.o
-	-$(RM) *.exe
-	-$(RM) foo.gz
-
-adler32.o: zlib.h zconf.h
-compress.o: zlib.h zconf.h
-crc32.o: crc32.h zlib.h zconf.h
-deflate.o: deflate.h zutil.h zlib.h zconf.h
-example.o: zlib.h zconf.h
-inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
-inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
-infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
-inftrees.o: zutil.h zlib.h zconf.h inftrees.h
-minigzip.o: zlib.h zconf.h
-trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
-uncompr.o: zlib.h zconf.h
-zutil.o: zutil.h zlib.h zconf.h

win32/Makefile.msc

@@ -2,15 +2,16 @@
 # zlib is copyright (C) 1995-2006 Jean-loup Gailly and Mark Adler
 #
 # Usage:
-#   nmake -f win32/Makefile.msc            (standard build)
+#   nmake -f win32/Makefile.msc                          (standard build)
-#   nmake -f win32/Makefile.msc LOC=-DFOO  (nonstandard build)
+#   nmake -f win32/Makefile.msc LOC=-DFOO                (nonstandard build)
-#   nmake -f win32/Makefile.msc LOC=-DASMV OBJA=match.obj  (use ASM code)
+#   nmake -f win32/Makefile.msc LOC="-DASMV -DASMINF" \
-
+#         OBJA="inffas32.obj match686.obj"               (use ASM code, x86)
+#   nmake -f win32/Makefile.msc AS=ml64 LOC="-DASMV -DASMINF" \
+#         OBJA="inffasx64.obj gvmat64.obj inffas8664.c"  (use ASM code, x64)
 
 # optional build flags
 LOC =
 
-
 # variables
 STATICLIB = zlib.lib
 SHAREDLIB = zlib1.dll
@@ -23,13 +24,13 @@ AR = lib
 RC = rc
 CFLAGS  = -nologo -MD -W3 -O2 -Oy- -Zi -Fd"zlib" $(LOC)
 WFLAGS  = -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE
-ASFLAGS = -coff -Zi
+ASFLAGS = -coff -Zi $(LOC)
 LDFLAGS = -nologo -debug -incremental:no -opt:ref
 ARFLAGS = -nologo
 RCFLAGS = /dWIN32 /r
 
 OBJS = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj \
-       gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
+       gzwrite.obj infback.obj inflate.obj inftrees.obj inffast.obj trees.obj uncompr.obj zutil.obj
 OBJA =
 
 
@@ -71,7 +72,13 @@ minigzip_d.exe: minigzip.obj $(IMPLIB)
 .c.obj:
 	$(CC) -c $(WFLAGS) $(CFLAGS) $<
 
-.asm.obj:
+{contrib/masmx64}.c.obj:
+	$(CC) -c $(WFLAGS) $(CFLAGS) $<
+
+{contrib/masmx64}.asm.obj:
+	$(AS) -c $(ASFLAGS) $<
+
+{contrib/masmx86}.asm.obj:
 	$(AS) -c $(ASFLAGS) $<
 
 adler32.obj: adler32.c zlib.h zconf.h
@@ -107,9 +114,20 @@ uncompr.obj: uncompr.c zlib.h zconf.h
 
 zutil.obj: zutil.c zutil.h zlib.h zconf.h
 
-example.obj: example.c zlib.h zconf.h
+gvmat64.obj: contrib\masmx64\gvmat64.asm
 
-minigzip.obj: minigzip.c zlib.h zconf.h
+inffasx64.obj: contrib\masmx64\inffasx64.asm
+
+inffas8664.obj: contrib\masmx64\inffas8664.c zutil.h zlib.h zconf.h \
+		inftrees.h inflate.h inffast.h
+
+inffas32.obj: contrib\masmx86\inffas32.asm
+
+match686.obj: contrib\masmx86\match686.asm
+
+example.obj: test/example.c zlib.h zconf.h
+
+minigzip.obj: test/minigzip.c zlib.h zconf.h
 
 zlib1.res: win32/zlib1.rc
 	$(RC) $(RCFLAGS) /fo$@ win32/zlib1.rc

win32/README-WIN32.txt

@@ -0,0 +1,103 @@
+ZLIB DATA COMPRESSION LIBRARY
+
+zlib 1.2.4 is a general purpose data compression library.  All the code is
+thread safe.  The data format used by the zlib library is described by RFCs
+(Request for Comments) 1950 to 1952 in the files
+http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
+and rfc1952.txt (gzip format).
+
+All functions of the compression library are documented in the file zlib.h
+(volunteer to write man pages welcome, contact zlib@gzip.org).  Two compiled
+examples are distributed in this package, example and minigzip.  The example_d
+and minigzip_d flavors validate that the zlib1.dll file is working correctly.
+
+Questions about zlib should be sent to <zlib@gzip.org>.  The zlib home page
+is http://zlib.net/ .  Before reporting a problem, please check this site to
+verify that you have the latest version of zlib; otherwise get the latest
+version and check whether the problem still exists or not.
+
+PLEASE read DLL_FAQ.txt, and the the zlib FAQ http://zlib.net/zlib_faq.html
+before asking for help.
+
+
+Manifest:
+
+The package zlib-1.2.4-win32-x86.zip contains the following files:
+
+  README-WIN32.txt This document
+  ChangeLog        Changes since previous zlib packages
+  DLL_FAQ.txt      Frequently asked questions about zlib1.dll
+  zlib.3.pdf       Documentation of this library in Adobe Acrobat format
+
+  example.exe      A statically-bound example (using zlib.lib, not the dll)
+  example.pdb      Symbolic information for debugging example.exe
+
+  example_d.exe    A zlib1.dll bound example (using zdll.lib)
+  example_d.pdb    Symbolic information for debugging example_d.exe
+
+  minigzip.exe     A statically-bound test program (using zlib.lib, not the dll)
+  minigzip.pdb     Symbolic information for debugging minigzip.exe
+
+  minigzip_d.exe   A zlib1.dll bound test program (using zdll.lib)
+  minigzip_d.pdb   Symbolic information for debugging minigzip_d.exe
+
+  zlib.h           Install these files into the compilers' INCLUDE path to
+  zconf.h          compile programs which use zlib.lib or zdll.lib
+
+  zdll.lib         Install these files into the compilers' LIB path if linking
+  zdll.exp         a compiled program to the zlib1.dll binary
+
+  zlib.lib         Install these files into the compilers' LIB path to link zlib
+  zlib.pdb         into compiled programs, without zlib1.dll runtime dependency
+                   (zlib.pdb provides debugging info to the compile time linker)
+
+  zlib1.dll        Install this binary shared library into the system PATH, or
+                   the program's runtime directory (where the .exe resides)
+  zlib1.pdb        Install in the same directory as zlib1.dll, in order to debug
+                   an application crash using WinDbg or similar tools.
+
+All .pdb files above are entirely optional, but are very useful to a developer
+attempting to diagnose program misbehavior or a crash.  Many additional
+important files for developers can be found in the zlib124.zip source package
+available from http://zlib.net/ - review that package's README file for details.
+
+
+Acknowledgments:
+
+The deflate format used by zlib was defined by Phil Katz.  The deflate and
+zlib specifications were written by L.  Peter Deutsch.  Thanks to all the
+people who reported problems and suggested various improvements in zlib; they
+are too numerous to cite here.
+
+
+Copyright notice:
+
+  (C) 1995-2010 Jean-loup Gailly and Mark Adler
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  Jean-loup Gailly        Mark Adler
+  jloup@gzip.org          madler@alumni.caltech.edu
+
+If you use the zlib library in a product, we would appreciate *not* receiving
+lengthy legal documents to sign.  The sources are provided for free but without
+warranty of any kind.  The library has been entirely written by Jean-loup
+Gailly and Mark Adler; it does not include third-party code.
+
+If you redistribute modified sources, we would appreciate that you include in
+the file ChangeLog history information documenting your changes.  Please read
+the FAQ for more information on the distribution of modified source versions.

win32/zlib.def

@@ -1,6 +1,4 @@
-LIBRARY
 ; zlib data compression library
-
 EXPORTS
 ; basic functions
     zlibVersion
@@ -15,6 +13,7 @@ EXPORTS
     deflateParams
     deflateTune
     deflateBound
+    deflatePending
     deflatePrime
     deflateSetHeader
     inflateSetDictionary
@@ -43,7 +42,6 @@ EXPORTS
     gzputs
     gzgets
     gzputc
-    gzgetc
     gzungetc
     gzflush
     gzseek
@@ -57,6 +55,13 @@ EXPORTS
     gzclose_w
     gzerror
     gzclearerr
+; large file functions
+    gzopen64
+    gzseek64
+    gztell64
+    gzoffset64
+    adler32_combine64
+    crc32_combine64
 ; checksum functions
     adler32
     crc32
@@ -72,3 +77,7 @@ EXPORTS
     inflateSyncPoint
     get_crc_table
     inflateUndermine
+    inflateResetKeep
+    deflateResetKeep
+    gzgetc_
+    gzflags

zconf.h

@@ -1,5 +1,5 @@
 /* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2010 Jean-loup Gailly.
+ * Copyright (C) 1995-2011 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -15,6 +15,7 @@
  * this permanently in zconf.h using "./configure --zprefix".
  */
 #ifdef Z_PREFIX     /* may be set to #if 1 by ./configure */
+#  define Z_PREFIX_SET
 
 /* all linked symbols */
 #  define _dist_code            z__dist_code
@@ -27,9 +28,11 @@
 #  define adler32               z_adler32
 #  define adler32_combine       z_adler32_combine
 #  define adler32_combine64     z_adler32_combine64
-#  define compress              z_compress
+#  ifndef Z_SOLO
-#  define compress2             z_compress2
+#    define compress              z_compress
-#  define compressBound         z_compressBound
+#    define compress2             z_compress2
+#    define compressBound         z_compressBound
+#  endif
 #  define crc32                 z_crc32
 #  define crc32_combine         z_crc32_combine
 #  define crc32_combine64       z_crc32_combine64
@@ -40,44 +43,50 @@
 #  define deflateInit2_         z_deflateInit2_
 #  define deflateInit_          z_deflateInit_
 #  define deflateParams         z_deflateParams
+#  define deflatePending        z_deflatePending
 #  define deflatePrime          z_deflatePrime
 #  define deflateReset          z_deflateReset
+#  define deflateResetKeep      z_deflateResetKeep
 #  define deflateSetDictionary  z_deflateSetDictionary
 #  define deflateSetHeader      z_deflateSetHeader
 #  define deflateTune           z_deflateTune
 #  define deflate_copyright     z_deflate_copyright
 #  define get_crc_table         z_get_crc_table
-#  define gz_error              z_gz_error
+#  ifndef Z_SOLO
-#  define gz_intmax             z_gz_intmax
+#    define gz_error              z_gz_error
-#  define gz_strwinerror        z_gz_strwinerror
+#    define gz_intmax             z_gz_intmax
-#  define gzbuffer              z_gzbuffer
+#    define gz_strwinerror        z_gz_strwinerror
-#  define gzclearerr            z_gzclearerr
+#    define gzbuffer              z_gzbuffer
-#  define gzclose               z_gzclose
+#    define gzclearerr            z_gzclearerr
-#  define gzclose_r             z_gzclose_r
+#    define gzclose               z_gzclose
-#  define gzclose_w             z_gzclose_w
+#    define gzclose_r             z_gzclose_r
-#  define gzdirect              z_gzdirect
+#    define gzclose_w             z_gzclose_w
-#  define gzdopen               z_gzdopen
+#    define gzdirect              z_gzdirect
-#  define gzeof                 z_gzeof
+#    define gzdopen               z_gzdopen
-#  define gzerror               z_gzerror
+#    define gzeof                 z_gzeof
-#  define gzflush               z_gzflush
+#    define gzerror               z_gzerror
-#  define gzgetc                z_gzgetc
+#    define gzflags               z_gzflags
-#  define gzgets                z_gzgets
+#    define gzflush               z_gzflush
-#  define gzoffset              z_gzoffset
+#    define gzgetc                z_gzgetc
-#  define gzoffset64            z_gzoffset64
+#    define gzgetc_               z_gzgetc_
-#  define gzopen                z_gzopen
+#    define gzgets                z_gzgets
-#  define gzopen64              z_gzopen64
+#    define gzoffset              z_gzoffset
-#  define gzprintf              z_gzprintf
+#    define gzoffset64            z_gzoffset64
-#  define gzputc                z_gzputc
+#    define gzopen                z_gzopen
-#  define gzputs                z_gzputs
+#    define gzopen64              z_gzopen64
-#  define gzread                z_gzread
+#    define gzprintf              z_gzprintf
-#  define gzrewind              z_gzrewind
+#    define gzputc                z_gzputc
-#  define gzseek                z_gzseek
+#    define gzputs                z_gzputs
-#  define gzseek64              z_gzseek64
+#    define gzread                z_gzread
-#  define gzsetparams           z_gzsetparams
+#    define gzrewind              z_gzrewind
-#  define gztell                z_gztell
+#    define gzseek                z_gzseek
-#  define gztell64              z_gztell64
+#    define gzseek64              z_gzseek64
-#  define gzungetc              z_gzungetc
+#    define gzsetparams           z_gzsetparams
-#  define gzwrite               z_gzwrite
+#    define gztell                z_gztell
+#    define gztell64              z_gztell64
+#    define gzungetc              z_gzungetc
+#    define gzwrite               z_gzwrite
+#  endif
 #  define inflate               z_inflate
 #  define inflateBack           z_inflateBack
 #  define inflateBackEnd        z_inflateBackEnd
@@ -95,13 +104,18 @@
 #  define inflateSync           z_inflateSync
 #  define inflateSyncPoint      z_inflateSyncPoint
 #  define inflateUndermine      z_inflateUndermine
+#  define inflateResetKeep      z_inflateResetKeep
 #  define inflate_copyright     z_inflate_copyright
 #  define inflate_fast          z_inflate_fast
 #  define inflate_table         z_inflate_table
-#  define uncompress            z_uncompress
+#  ifndef Z_SOLO
+#    define uncompress            z_uncompress
+#  endif
 #  define zError                z_zError
-#  define zcalloc               z_zcalloc
+#  ifndef Z_SOLO
-#  define zcfree                z_zcfree
+#    define zcalloc               z_zcalloc
+#    define zcfree                z_zcfree
+#  endif
 #  define zlibCompileFlags      z_zlibCompileFlags
 #  define zlibVersion           z_zlibVersion
 
@@ -111,9 +125,11 @@
 #  define alloc_func            z_alloc_func
 #  define charf                 z_charf
 #  define free_func             z_free_func
-#  define gzFile                z_gzFile
+#  ifndef Z_SOLO
-#  define gz_header             z_gz_header
+#    define gzFile                z_gzFile
-#  define gz_headerp            z_gz_headerp
+#    define gz_header             z_gz_header
+#    define gz_headerp            z_gz_headerp
+#  endif
 #  define in_func               z_in_func
 #  define intf                  z_intf
 #  define out_func              z_out_func
@@ -126,7 +142,9 @@
 #  define voidpf                z_voidpf
 
 /* all zlib structs in zlib.h and zconf.h */
-#  define gz_header_s           z_gz_header_s
+#  ifndef Z_SOLO
+#    define gz_header_s           z_gz_header_s
+#  endif
 #  define internal_state        z_internal_state
 
 #endif
@@ -197,6 +215,12 @@
 #  endif
 #endif
 
+#if defined(ZLIB_CONST) && !defined(z_const)
+#  define z_const const
+#else
+#  define z_const
+#endif
+
 /* Some Mac compilers merge all .h files incorrectly: */
 #if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__)
 #  define NO_DUMMY_DECL
@@ -243,6 +267,14 @@
 #  endif
 #endif
 
+#ifndef Z_ARG /* function prototypes for stdarg */
+#  if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#    define Z_ARG(args)  args
+#  else
+#    define Z_ARG(args)  ()
+#  endif
+#endif
+
 /* The following definitions for FAR are needed only for MSDOS mixed
  * model programming (small or medium model with some far allocations).
  * This was tested only with MSC; for other MSDOS compilers you may have
@@ -315,10 +347,6 @@
 #  endif
 #endif
 
-#ifdef HAVE_VISIBILITY_PRAGMA
-#  define ZEXTERN __attribute__((visibility ("default"))) extern
-#endif
-
 #ifndef ZEXTERN
 #  define ZEXTERN extern
 #endif
@@ -364,8 +392,31 @@ typedef uLong FAR uLongf;
 #  define Z_HAVE_UNISTD_H
 #endif
 
-#ifdef Z_HAVE_UNISTD_H
+#ifdef HAVE_STDARG_H    /* may be set to #if 1 by ./configure */
-#  include <sys/types.h>    /* for off_t */
+#  define Z_HAVE_STDARG_H
+#endif
+
+#ifdef STDC
+#  ifndef Z_SOLO
+#    include <sys/types.h>      /* for off_t */
+#  endif
+#endif
+
+/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
+ * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
+ * though the former does not conform to the LFS document), but considering
+ * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
+ * equivalently requesting no 64-bit operations
+ */
+#if -_LARGEFILE64_SOURCE - -1 == 1
+#  undef _LARGEFILE64_SOURCE
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+#  define Z_LARGE
+#endif
+
+#if (defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)) && !defined(Z_SOLO)
 #  include <unistd.h>       /* for SEEK_* and off_t */
 #  ifdef VMS
 #    include <unixio.h>     /* for off_t */
@@ -375,25 +426,24 @@ typedef uLong FAR uLongf;
 #  endif
 #endif
 
-#ifdef _LARGEFILE64_SOURCE
+#if !defined(SEEK_SET) && !defined(Z_SOLO)
-#  include <sys/types.h>
-#endif
-
-#ifndef SEEK_SET
 #  define SEEK_SET        0       /* Seek from beginning of file.  */
 #  define SEEK_CUR        1       /* Seek from current position.  */
 #  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
 #endif
+
 #ifndef z_off_t
 #  define z_off_t long
 #endif
 
-#if defined(__OS400__)
+#if !defined(_WIN32) && (defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0)
-#  define NO_vsnprintf
+#  define z_off64_t off64_t
+#else
+#  if defined(_WIN32)
+#    define z_off64_t __int64
+#  else
+#  define z_off64_t z_off_t
 #endif
-
-#if defined(__MVS__)
-#  define NO_vsnprintf
 #endif
 
 /* MVS linker does not support external names larger than 8 bytes */

zconf.h.cmakein

@@ -1,5 +1,5 @@
 /* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2010 Jean-loup Gailly.
+ * Copyright (C) 1995-2011 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -17,6 +17,7 @@
  * this permanently in zconf.h using "./configure --zprefix".
  */
 #ifdef Z_PREFIX     /* may be set to #if 1 by ./configure */
+#  define Z_PREFIX_SET
 
 /* all linked symbols */
 #  define _dist_code            z__dist_code
@@ -29,9 +30,11 @@
 #  define adler32               z_adler32
 #  define adler32_combine       z_adler32_combine
 #  define adler32_combine64     z_adler32_combine64
-#  define compress              z_compress
+#  ifndef Z_SOLO
-#  define compress2             z_compress2
+#    define compress              z_compress
-#  define compressBound         z_compressBound
+#    define compress2             z_compress2
+#    define compressBound         z_compressBound
+#  endif
 #  define crc32                 z_crc32
 #  define crc32_combine         z_crc32_combine
 #  define crc32_combine64       z_crc32_combine64
@@ -42,44 +45,50 @@
 #  define deflateInit2_         z_deflateInit2_
 #  define deflateInit_          z_deflateInit_
 #  define deflateParams         z_deflateParams
+#  define deflatePending        z_deflatePending
 #  define deflatePrime          z_deflatePrime
 #  define deflateReset          z_deflateReset
+#  define deflateResetKeep      z_deflateResetKeep
 #  define deflateSetDictionary  z_deflateSetDictionary
 #  define deflateSetHeader      z_deflateSetHeader
 #  define deflateTune           z_deflateTune
 #  define deflate_copyright     z_deflate_copyright
 #  define get_crc_table         z_get_crc_table
-#  define gz_error              z_gz_error
+#  ifndef Z_SOLO
-#  define gz_intmax             z_gz_intmax
+#    define gz_error              z_gz_error
-#  define gz_strwinerror        z_gz_strwinerror
+#    define gz_intmax             z_gz_intmax
-#  define gzbuffer              z_gzbuffer
+#    define gz_strwinerror        z_gz_strwinerror
-#  define gzclearerr            z_gzclearerr
+#    define gzbuffer              z_gzbuffer
-#  define gzclose               z_gzclose
+#    define gzclearerr            z_gzclearerr
-#  define gzclose_r             z_gzclose_r
+#    define gzclose               z_gzclose
-#  define gzclose_w             z_gzclose_w
+#    define gzclose_r             z_gzclose_r
-#  define gzdirect              z_gzdirect
+#    define gzclose_w             z_gzclose_w
-#  define gzdopen               z_gzdopen
+#    define gzdirect              z_gzdirect
-#  define gzeof                 z_gzeof
+#    define gzdopen               z_gzdopen
-#  define gzerror               z_gzerror
+#    define gzeof                 z_gzeof
-#  define gzflush               z_gzflush
+#    define gzerror               z_gzerror
-#  define gzgetc                z_gzgetc
+#    define gzflags               z_gzflags
-#  define gzgets                z_gzgets
+#    define gzflush               z_gzflush
-#  define gzoffset              z_gzoffset
+#    define gzgetc                z_gzgetc
-#  define gzoffset64            z_gzoffset64
+#    define gzgetc_               z_gzgetc_
-#  define gzopen                z_gzopen
+#    define gzgets                z_gzgets
-#  define gzopen64              z_gzopen64
+#    define gzoffset              z_gzoffset
-#  define gzprintf              z_gzprintf
+#    define gzoffset64            z_gzoffset64
-#  define gzputc                z_gzputc
+#    define gzopen                z_gzopen
-#  define gzputs                z_gzputs
+#    define gzopen64              z_gzopen64
-#  define gzread                z_gzread
+#    define gzprintf              z_gzprintf
-#  define gzrewind              z_gzrewind
+#    define gzputc                z_gzputc
-#  define gzseek                z_gzseek
+#    define gzputs                z_gzputs
-#  define gzseek64              z_gzseek64
+#    define gzread                z_gzread
-#  define gzsetparams           z_gzsetparams
+#    define gzrewind              z_gzrewind
-#  define gztell                z_gztell
+#    define gzseek                z_gzseek
-#  define gztell64              z_gztell64
+#    define gzseek64              z_gzseek64
-#  define gzungetc              z_gzungetc
+#    define gzsetparams           z_gzsetparams
-#  define gzwrite               z_gzwrite
+#    define gztell                z_gztell
+#    define gztell64              z_gztell64
+#    define gzungetc              z_gzungetc
+#    define gzwrite               z_gzwrite
+#  endif
 #  define inflate               z_inflate
 #  define inflateBack           z_inflateBack
 #  define inflateBackEnd        z_inflateBackEnd
@@ -97,13 +106,18 @@
 #  define inflateSync           z_inflateSync
 #  define inflateSyncPoint      z_inflateSyncPoint
 #  define inflateUndermine      z_inflateUndermine
+#  define inflateResetKeep      z_inflateResetKeep
 #  define inflate_copyright     z_inflate_copyright
 #  define inflate_fast          z_inflate_fast
 #  define inflate_table         z_inflate_table
-#  define uncompress            z_uncompress
+#  ifndef Z_SOLO
+#    define uncompress            z_uncompress
+#  endif
 #  define zError                z_zError
-#  define zcalloc               z_zcalloc
+#  ifndef Z_SOLO
-#  define zcfree                z_zcfree
+#    define zcalloc               z_zcalloc
+#    define zcfree                z_zcfree
+#  endif
 #  define zlibCompileFlags      z_zlibCompileFlags
 #  define zlibVersion           z_zlibVersion
 
@@ -113,9 +127,11 @@
 #  define alloc_func            z_alloc_func
 #  define charf                 z_charf
 #  define free_func             z_free_func
-#  define gzFile                z_gzFile
+#  ifndef Z_SOLO
-#  define gz_header             z_gz_header
+#    define gzFile                z_gzFile
-#  define gz_headerp            z_gz_headerp
+#    define gz_header             z_gz_header
+#    define gz_headerp            z_gz_headerp
+#  endif
 #  define in_func               z_in_func
 #  define intf                  z_intf
 #  define out_func              z_out_func
@@ -128,7 +144,9 @@
 #  define voidpf                z_voidpf
 
 /* all zlib structs in zlib.h and zconf.h */
-#  define gz_header_s           z_gz_header_s
+#  ifndef Z_SOLO
+#    define gz_header_s           z_gz_header_s
+#  endif
 #  define internal_state        z_internal_state
 
 #endif
@@ -199,6 +217,12 @@
 #  endif
 #endif
 
+#if defined(ZLIB_CONST) && !defined(z_const)
+#  define z_const const
+#else
+#  define z_const
+#endif
+
 /* Some Mac compilers merge all .h files incorrectly: */
 #if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__)
 #  define NO_DUMMY_DECL
@@ -245,6 +269,14 @@
 #  endif
 #endif
 
+#ifndef Z_ARG /* function prototypes for stdarg */
+#  if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#    define Z_ARG(args)  args
+#  else
+#    define Z_ARG(args)  ()
+#  endif
+#endif
+
 /* The following definitions for FAR are needed only for MSDOS mixed
  * model programming (small or medium model with some far allocations).
  * This was tested only with MSC; for other MSDOS compilers you may have
@@ -317,10 +349,6 @@
 #  endif
 #endif
 
-#ifdef HAVE_VISIBILITY_PRAGMA
-#  define ZEXTERN __attribute__((visibility ("default"))) extern
-#endif
-
 #ifndef ZEXTERN
 #  define ZEXTERN extern
 #endif
@@ -366,8 +394,31 @@ typedef uLong FAR uLongf;
 #  define Z_HAVE_UNISTD_H
 #endif
 
-#ifdef Z_HAVE_UNISTD_H
+#ifdef HAVE_STDARG_H    /* may be set to #if 1 by ./configure */
-#  include <sys/types.h>    /* for off_t */
+#  define Z_HAVE_STDARG_H
+#endif
+
+#ifdef STDC
+#  ifndef Z_SOLO
+#    include <sys/types.h>      /* for off_t */
+#  endif
+#endif
+
+/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
+ * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
+ * though the former does not conform to the LFS document), but considering
+ * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
+ * equivalently requesting no 64-bit operations
+ */
+#if -_LARGEFILE64_SOURCE - -1 == 1
+#  undef _LARGEFILE64_SOURCE
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+#  define Z_LARGE
+#endif
+
+#if (defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)) && !defined(Z_SOLO)
 #  include <unistd.h>       /* for SEEK_* and off_t */
 #  ifdef VMS
 #    include <unixio.h>     /* for off_t */
@@ -377,25 +428,24 @@ typedef uLong FAR uLongf;
 #  endif
 #endif
 
-#ifdef _LARGEFILE64_SOURCE
+#if !defined(SEEK_SET) && !defined(Z_SOLO)
-#  include <sys/types.h>
-#endif
-
-#ifndef SEEK_SET
 #  define SEEK_SET        0       /* Seek from beginning of file.  */
 #  define SEEK_CUR        1       /* Seek from current position.  */
 #  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
 #endif
+
 #ifndef z_off_t
 #  define z_off_t long
 #endif
 
-#if defined(__OS400__)
+#if !defined(_WIN32) && (defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0)
-#  define NO_vsnprintf
+#  define z_off64_t off64_t
+#else
+#  if defined(_WIN32)
+#    define z_off64_t __int64
+#  else
+#  define z_off64_t z_off_t
 #endif
-
-#if defined(__MVS__)
-#  define NO_vsnprintf
 #endif
 
 /* MVS linker does not support external names larger than 8 bytes */

zconf.h.in

@@ -1,5 +1,5 @@
 /* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2010 Jean-loup Gailly.
+ * Copyright (C) 1995-2011 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -15,6 +15,7 @@
  * this permanently in zconf.h using "./configure --zprefix".
  */
 #ifdef Z_PREFIX     /* may be set to #if 1 by ./configure */
+#  define Z_PREFIX_SET
 
 /* all linked symbols */
 #  define _dist_code            z__dist_code
@@ -27,9 +28,11 @@
 #  define adler32               z_adler32
 #  define adler32_combine       z_adler32_combine
 #  define adler32_combine64     z_adler32_combine64
-#  define compress              z_compress
+#  ifndef Z_SOLO
-#  define compress2             z_compress2
+#    define compress              z_compress
-#  define compressBound         z_compressBound
+#    define compress2             z_compress2
+#    define compressBound         z_compressBound
+#  endif
 #  define crc32                 z_crc32
 #  define crc32_combine         z_crc32_combine
 #  define crc32_combine64       z_crc32_combine64
@@ -40,44 +43,50 @@
 #  define deflateInit2_         z_deflateInit2_
 #  define deflateInit_          z_deflateInit_
 #  define deflateParams         z_deflateParams
+#  define deflatePending        z_deflatePending
 #  define deflatePrime          z_deflatePrime
 #  define deflateReset          z_deflateReset
+#  define deflateResetKeep      z_deflateResetKeep
 #  define deflateSetDictionary  z_deflateSetDictionary
 #  define deflateSetHeader      z_deflateSetHeader
 #  define deflateTune           z_deflateTune
 #  define deflate_copyright     z_deflate_copyright
 #  define get_crc_table         z_get_crc_table
-#  define gz_error              z_gz_error
+#  ifndef Z_SOLO
-#  define gz_intmax             z_gz_intmax
+#    define gz_error              z_gz_error
-#  define gz_strwinerror        z_gz_strwinerror
+#    define gz_intmax             z_gz_intmax
-#  define gzbuffer              z_gzbuffer
+#    define gz_strwinerror        z_gz_strwinerror
-#  define gzclearerr            z_gzclearerr
+#    define gzbuffer              z_gzbuffer
-#  define gzclose               z_gzclose
+#    define gzclearerr            z_gzclearerr
-#  define gzclose_r             z_gzclose_r
+#    define gzclose               z_gzclose
-#  define gzclose_w             z_gzclose_w
+#    define gzclose_r             z_gzclose_r
-#  define gzdirect              z_gzdirect
+#    define gzclose_w             z_gzclose_w
-#  define gzdopen               z_gzdopen
+#    define gzdirect              z_gzdirect
-#  define gzeof                 z_gzeof
+#    define gzdopen               z_gzdopen
-#  define gzerror               z_gzerror
+#    define gzeof                 z_gzeof
-#  define gzflush               z_gzflush
+#    define gzerror               z_gzerror
-#  define gzgetc                z_gzgetc
+#    define gzflags               z_gzflags
-#  define gzgets                z_gzgets
+#    define gzflush               z_gzflush
-#  define gzoffset              z_gzoffset
+#    define gzgetc                z_gzgetc
-#  define gzoffset64            z_gzoffset64
+#    define gzgetc_               z_gzgetc_
-#  define gzopen                z_gzopen
+#    define gzgets                z_gzgets
-#  define gzopen64              z_gzopen64
+#    define gzoffset              z_gzoffset
-#  define gzprintf              z_gzprintf
+#    define gzoffset64            z_gzoffset64
-#  define gzputc                z_gzputc
+#    define gzopen                z_gzopen
-#  define gzputs                z_gzputs
+#    define gzopen64              z_gzopen64
-#  define gzread                z_gzread
+#    define gzprintf              z_gzprintf
-#  define gzrewind              z_gzrewind
+#    define gzputc                z_gzputc
-#  define gzseek                z_gzseek
+#    define gzputs                z_gzputs
-#  define gzseek64              z_gzseek64
+#    define gzread                z_gzread
-#  define gzsetparams           z_gzsetparams
+#    define gzrewind              z_gzrewind
-#  define gztell                z_gztell
+#    define gzseek                z_gzseek
-#  define gztell64              z_gztell64
+#    define gzseek64              z_gzseek64
-#  define gzungetc              z_gzungetc
+#    define gzsetparams           z_gzsetparams
-#  define gzwrite               z_gzwrite
+#    define gztell                z_gztell
+#    define gztell64              z_gztell64
+#    define gzungetc              z_gzungetc
+#    define gzwrite               z_gzwrite
+#  endif
 #  define inflate               z_inflate
 #  define inflateBack           z_inflateBack
 #  define inflateBackEnd        z_inflateBackEnd
@@ -95,13 +104,18 @@
 #  define inflateSync           z_inflateSync
 #  define inflateSyncPoint      z_inflateSyncPoint
 #  define inflateUndermine      z_inflateUndermine
+#  define inflateResetKeep      z_inflateResetKeep
 #  define inflate_copyright     z_inflate_copyright
 #  define inflate_fast          z_inflate_fast
 #  define inflate_table         z_inflate_table
-#  define uncompress            z_uncompress
+#  ifndef Z_SOLO
+#    define uncompress            z_uncompress
+#  endif
 #  define zError                z_zError
-#  define zcalloc               z_zcalloc
+#  ifndef Z_SOLO
-#  define zcfree                z_zcfree
+#    define zcalloc               z_zcalloc
+#    define zcfree                z_zcfree
+#  endif
 #  define zlibCompileFlags      z_zlibCompileFlags
 #  define zlibVersion           z_zlibVersion
 
@@ -111,9 +125,11 @@
 #  define alloc_func            z_alloc_func
 #  define charf                 z_charf
 #  define free_func             z_free_func
-#  define gzFile                z_gzFile
+#  ifndef Z_SOLO
-#  define gz_header             z_gz_header
+#    define gzFile                z_gzFile
-#  define gz_headerp            z_gz_headerp
+#    define gz_header             z_gz_header
+#    define gz_headerp            z_gz_headerp
+#  endif
 #  define in_func               z_in_func
 #  define intf                  z_intf
 #  define out_func              z_out_func
@@ -126,7 +142,9 @@
 #  define voidpf                z_voidpf
 
 /* all zlib structs in zlib.h and zconf.h */
-#  define gz_header_s           z_gz_header_s
+#  ifndef Z_SOLO
+#    define gz_header_s           z_gz_header_s
+#  endif
 #  define internal_state        z_internal_state
 
 #endif
@@ -197,6 +215,12 @@
 #  endif
 #endif
 
+#if defined(ZLIB_CONST) && !defined(z_const)
+#  define z_const const
+#else
+#  define z_const
+#endif
+
 /* Some Mac compilers merge all .h files incorrectly: */
 #if defined(__MWERKS__)||defined(applec)||defined(THINK_C)||defined(__SC__)
 #  define NO_DUMMY_DECL
@@ -243,6 +267,14 @@
 #  endif
 #endif
 
+#ifndef Z_ARG /* function prototypes for stdarg */
+#  if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#    define Z_ARG(args)  args
+#  else
+#    define Z_ARG(args)  ()
+#  endif
+#endif
+
 /* The following definitions for FAR are needed only for MSDOS mixed
  * model programming (small or medium model with some far allocations).
  * This was tested only with MSC; for other MSDOS compilers you may have
@@ -315,10 +347,6 @@
 #  endif
 #endif
 
-#ifdef HAVE_VISIBILITY_PRAGMA
-#  define ZEXTERN __attribute__((visibility ("default"))) extern
-#endif
-
 #ifndef ZEXTERN
 #  define ZEXTERN extern
 #endif
@@ -364,8 +392,31 @@ typedef uLong FAR uLongf;
 #  define Z_HAVE_UNISTD_H
 #endif
 
-#ifdef Z_HAVE_UNISTD_H
+#ifdef HAVE_STDARG_H    /* may be set to #if 1 by ./configure */
-#  include <sys/types.h>    /* for off_t */
+#  define Z_HAVE_STDARG_H
+#endif
+
+#ifdef STDC
+#  ifndef Z_SOLO
+#    include <sys/types.h>      /* for off_t */
+#  endif
+#endif
+
+/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
+ * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
+ * though the former does not conform to the LFS document), but considering
+ * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
+ * equivalently requesting no 64-bit operations
+ */
+#if -_LARGEFILE64_SOURCE - -1 == 1
+#  undef _LARGEFILE64_SOURCE
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+#  define Z_LARGE
+#endif
+
+#if (defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)) && !defined(Z_SOLO)
 #  include <unistd.h>       /* for SEEK_* and off_t */
 #  ifdef VMS
 #    include <unixio.h>     /* for off_t */
@@ -375,25 +426,24 @@ typedef uLong FAR uLongf;
 #  endif
 #endif
 
-#ifdef _LARGEFILE64_SOURCE
+#if !defined(SEEK_SET) && !defined(Z_SOLO)
-#  include <sys/types.h>
-#endif
-
-#ifndef SEEK_SET
 #  define SEEK_SET        0       /* Seek from beginning of file.  */
 #  define SEEK_CUR        1       /* Seek from current position.  */
 #  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
 #endif
+
 #ifndef z_off_t
 #  define z_off_t long
 #endif
 
-#if defined(__OS400__)
+#if !defined(_WIN32) && (defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0)
-#  define NO_vsnprintf
+#  define z_off64_t off64_t
+#else
+#  if defined(_WIN32)
+#    define z_off64_t __int64
+#  else
+#  define z_off64_t z_off_t
 #endif
-
-#if defined(__MVS__)
-#  define NO_vsnprintf
 #endif
 
 /* MVS linker does not support external names larger than 8 bytes */

zlib.3

@@ -1,4 +1,4 @@
-.TH ZLIB 3 "13 March 2010"
+.TH ZLIB 3 "17 Dec 2011"
 .SH NAME
 zlib \- compression/decompression library
 .SH SYNOPSIS
@@ -36,9 +36,9 @@ All functions of the compression library are documented in the file
 .IR zlib.h .
 The distribution source includes examples of use of the library
 in the files
-.I example.c
+.I test/example.c
 and
-.IR minigzip.c,
+.IR test/minigzip.c,
 as well as other examples in the
 .IR examples/
 directory.
@@ -65,7 +65,7 @@ A Python interface to
 written by A.M. Kuchling (amk@magnet.com),
 is available in Python 1.5 and later versions:
 .IP
-http://www.python.org/doc/lib/module-zlib.html
+http://docs.python.org/library/zlib.html
 .LP
 .I zlib
 is built into
@@ -95,11 +95,11 @@ http://zlib.net/
 The data format used by the zlib library is described by RFC
 (Request for Comments) 1950 to 1952 in the files:
 .IP
-http://www.ietf.org/rfc/rfc1950.txt (for the zlib header and trailer format)
+http://tools.ietf.org/html/rfc1950 (for the zlib header and trailer format)
 .br
-http://www.ietf.org/rfc/rfc1951.txt (for the deflate compressed data format)
+http://tools.ietf.org/html/rfc1951 (for the deflate compressed data format)
 .br
-http://www.ietf.org/rfc/rfc1952.txt (for the gzip header and trailer format)
+http://tools.ietf.org/html/rfc1952 (for the gzip header and trailer format)
 .LP
 Mark Nelson wrote an article about
 .I zlib
@@ -125,8 +125,8 @@ before asking for help.
 Send questions and/or comments to zlib@gzip.org,
 or (for the Windows DLL version) to Gilles Vollant (info@winimage.com).
 .SH AUTHORS
-Version 1.2.4
+Version 1.2.5.2
-Copyright (C) 1995-2010 Jean-loup Gailly (jloup@gzip.org)
+Copyright (C) 1995-2011 Jean-loup Gailly (jloup@gzip.org)
 and Mark Adler (madler@alumni.caltech.edu).
 .LP
 This software is provided "as-is,"

zlib.h

@@ -1,7 +1,7 @@
 /* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.2.4, Mar 13th, 2010
+  version 1.2.5.2, December 17th, 2011
 
-  Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
+  Copyright (C) 1995-2011 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
@@ -24,8 +24,8 @@
 
 
   The data format used by the zlib library is described by RFCs (Request for
-  Comments) 1950 to 1952 in the files http://www.ietf.org/rfc/rfc1950.txt
+  Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950
-  (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
+  (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format).
 */
 
 #ifndef ZLIB_H
@@ -37,12 +37,12 @@
 extern "C" {
 #endif
 
-#define ZLIB_VERSION "1.2.4"
+#define ZLIB_VERSION "1.2.5.2"
-#define ZLIB_VERNUM 0x1240
+#define ZLIB_VERNUM 0x1252
 #define ZLIB_VER_MAJOR 1
 #define ZLIB_VER_MINOR 2
-#define ZLIB_VER_REVISION 4
+#define ZLIB_VER_REVISION 5
-#define ZLIB_VER_SUBREVISION 0
+#define ZLIB_VER_SUBREVISION 2
 
 /*
     The 'zlib' compression library provides in-memory compression and
@@ -83,15 +83,15 @@ typedef void   (*free_func)  OF((voidpf opaque, voidpf address));
 struct internal_state;
 
 typedef struct z_stream_s {
-    Bytef    *next_in;  /* next input byte */
+    z_const Bytef *next_in;     /* next input byte */
     uInt     avail_in;  /* number of bytes available at next_in */
-    uLong    total_in;  /* total nb of input bytes read so far */
+    uLong    total_in;  /* total number of input bytes read so far */
 
     Bytef    *next_out; /* next output byte should be put there */
     uInt     avail_out; /* remaining free space at next_out */
-    uLong    total_out; /* total nb of bytes output so far */
+    uLong    total_out; /* total number of bytes output so far */
 
-    char     *msg;      /* last error message, NULL if no error */
+    z_const char *msg;  /* last error message, NULL if no error */
     struct internal_state FAR *state; /* not visible by applications */
 
     alloc_func zalloc;  /* used to allocate the internal state */
@@ -327,8 +327,9 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
 
     Z_FINISH can be used immediately after deflateInit if all the compression
   is to be done in a single step.  In this case, avail_out must be at least the
-  value returned by deflateBound (see below).  If deflate does not return
+  value returned by deflateBound (see below).  Then deflate is guaranteed to
-  Z_STREAM_END, then it must be called again as described above.
+  return Z_STREAM_END.  If not enough output space is provided, deflate will
+  not return Z_STREAM_END, and it must be called again as described above.
 
     deflate() sets strm->adler to the adler32 checksum of all input read
   so far (that is, total_in bytes).
@@ -454,20 +455,23 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
   avail_out must be large enough to hold all the uncompressed data.  (The size
   of the uncompressed data may have been saved by the compressor for this
   purpose.) The next operation on this stream must be inflateEnd to deallocate
-  the decompression state.  The use of Z_FINISH is never required, but can be
+  the decompression state.  The use of Z_FINISH is not required to perform an
-  used to inform inflate that a faster approach may be used for the single
+  inflation in one step.  However it may be used to inform inflate that a
-  inflate() call.
+  faster approach can be used for the single inflate() call.  Z_FINISH also
+  informs inflate to not maintain a sliding window if the stream completes,
+  which reduces inflate's memory footprint.
 
      In this implementation, inflate() always flushes as much output as
   possible to the output buffer, and always uses the faster approach on the
-  first call.  So the only effect of the flush parameter in this implementation
+  first call.  So the effects of the flush parameter in this implementation are
-  is on the return value of inflate(), as noted below, or when it returns early
+  on the return value of inflate() as noted below, when inflate() returns early
-  because Z_BLOCK or Z_TREES is used.
+  when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of
+  memory for a sliding window when Z_FINISH is used.
 
      If a preset dictionary is needed after this call (see inflateSetDictionary
-  below), inflate sets strm->adler to the adler32 checksum of the dictionary
+  below), inflate sets strm->adler to the Adler-32 checksum of the dictionary
   chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
-  strm->adler to the adler32 checksum of all output produced so far (that is,
+  strm->adler to the Adler-32 checksum of all output produced so far (that is,
   total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
   below.  At the end of the stream, inflate() checks that its computed adler32
   checksum is equal to that saved by the compressor and returns Z_STREAM_END
@@ -478,7 +482,9 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
   initializing with inflateInit2().  Any information contained in the gzip
   header is not retained, so applications that need that information should
   instead use raw inflate, see inflateInit2() below, or inflateBack() and
-  perform their own processing of the gzip header and trailer.
+  perform their own processing of the gzip header and trailer.  When processing
+  gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output
+  producted so far.  The CRC-32 is checked against the gzip trailer.
 
     inflate() returns Z_OK if some progress has been made (more input processed
   or more output produced), Z_STREAM_END if the end of the compressed data has
@@ -580,10 +586,15 @@ ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
                                              uInt  dictLength));
 /*
      Initializes the compression dictionary from the given byte sequence
-   without producing any compressed output.  This function must be called
+   without producing any compressed output.  When using the zlib format, this
-   immediately after deflateInit, deflateInit2 or deflateReset, before any call
+   function must be called immediately after deflateInit, deflateInit2 or
-   of deflate.  The compressor and decompressor must use exactly the same
+   deflateReset, and before any call of deflate.  When doing raw deflate, this
-   dictionary (see inflateSetDictionary).
+   function must be called either before any call of deflate, or immediately
+   after the completion of a deflate block, i.e. after all input has been
+   consumed and all output has been delivered when using any of the flush
+   options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH.  The
+   compressor and decompressor must use exactly the same dictionary (see
+   inflateSetDictionary).
 
      The dictionary should consist of strings (byte sequences) that are likely
    to be encountered later in the data to be compressed, with the most commonly
@@ -610,8 +621,8 @@ ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
      deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
    parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
    inconsistent (for example if deflate has already been called for this stream
-   or if the compression method is bsort).  deflateSetDictionary does not
+   or if not at a block boundary for raw deflate).  deflateSetDictionary does
-   perform any compression: this will be done by deflate().
+   not perform any compression: this will be done by deflate().
 */
 
 ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
@@ -688,9 +699,28 @@ ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
    deflation of sourceLen bytes.  It must be called after deflateInit() or
    deflateInit2(), and after deflateSetHeader(), if used.  This would be used
    to allocate an output buffer for deflation in a single pass, and so would be
-   called before deflate().
+   called before deflate().  If that first deflate() call is provided the
+   sourceLen input bytes, an output buffer allocated to the size returned by
+   deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed
+   to return Z_STREAM_END.  Note that it is possible for the compressed size to
+   be larger than the value returned by deflateBound() if flush options other
+   than Z_FINISH or Z_NO_FLUSH are used.
 */
 
+ZEXTERN int ZEXPORT deflatePending OF((z_streamp strm,
+                                       unsigned *pending,
+                                       int *bits));
+/*
+     deflatePending() returns the number of bytes and bits of output that have
+   been generated, but not yet provided in the available output.  The bytes not
+   provided would be due to the available output space having being consumed.
+   The number of bits of output not provided are between 0 and 7, where they
+   await more bits to join them in order to fill out a full byte.
+
+     deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source
+   stream state was inconsistent.
+ */
+
 ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
                                      int bits,
                                      int value));
@@ -790,10 +820,11 @@ ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
    if that call returned Z_NEED_DICT.  The dictionary chosen by the compressor
    can be determined from the adler32 value returned by that call of inflate.
    The compressor and decompressor must use exactly the same dictionary (see
-   deflateSetDictionary).  For raw inflate, this function can be called
+   deflateSetDictionary).  For raw inflate, this function can be called at any
-   immediately after inflateInit2() or inflateReset() and before any call of
+   time to set the dictionary.  If the provided dictionary is smaller than the
-   inflate() to set the dictionary.  The application must insure that the
+   window and there is already data in the window, then the provided dictionary
-   dictionary that was used for compression is provided.
+   will amend what's there.  The application must insure that the dictionary
+   that was used for compression is provided.
 
      inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
    parameter is invalid (e.g.  dictionary being Z_NULL) or the stream state is
@@ -805,17 +836,21 @@ ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
 
 ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
 /*
-     Skips invalid compressed data until a full flush point (see above the
+     Skips invalid compressed data until a possible full flush point (see above
-   description of deflate with Z_FULL_FLUSH) can be found, or until all
+   for the description of deflate with Z_FULL_FLUSH) can be found, or until all
    available input is skipped.  No output is provided.
 
-     inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
+     inflateSync searches for a 00 00 FF FF pattern in the compressed data.
-   if no more input was provided, Z_DATA_ERROR if no flush point has been
+   All full flush points have this pattern, but not all occurences of this
-   found, or Z_STREAM_ERROR if the stream structure was inconsistent.  In the
+   pattern are full flush points.
-   success case, the application may save the current current value of total_in
+
-   which indicates where valid compressed data was found.  In the error case,
+     inflateSync returns Z_OK if a possible full flush point has been found,
-   the application may repeatedly call inflateSync, providing more input each
+   Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point
-   time, until success or end of the input data.
+   has been found, or Z_STREAM_ERROR if the stream structure was inconsistent.
+   In the success case, the application may save the current current value of
+   total_in which indicates where valid compressed data was found.  In the
+   error case, the application may repeatedly call inflateSync, providing more
+   input each time, until success or end of the input data.
 */
 
 ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
@@ -962,7 +997,7 @@ ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
      See inflateBack() for the usage of these routines.
 
      inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
-   the paramaters are invalid, Z_MEM_ERROR if the internal state could not be
+   the parameters are invalid, Z_MEM_ERROR if the internal state could not be
    allocated, or Z_VERSION_ERROR if the version of the library does not match
    the version of the header file.
 */
@@ -1088,6 +1123,7 @@ ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
      27-31: 0 (reserved)
  */
 
+#ifndef Z_SOLO
 
                         /* utility functions */
 
@@ -1149,10 +1185,11 @@ ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
 
      uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
    enough memory, Z_BUF_ERROR if there was not enough room in the output
-   buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete.
+   buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete.  In
+   the case where there is not enough room, uncompress() will fill the output
+   buffer with the uncompressed data up to that point.
 */
 
-
                         /* gzip file access functions */
 
 /*
@@ -1162,7 +1199,7 @@ ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
    wrapper, documented in RFC 1952, wrapped around a deflate stream.
 */
 
-typedef voidp gzFile;       /* opaque gzip file descriptor */
+typedef struct gzFile_s *gzFile;    /* semi-opaque gzip file descriptor */
 
 /*
 ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
@@ -1172,13 +1209,25 @@ ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
    a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only
    compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F'
    for fixed code compression as in "wb9F".  (See the description of
-   deflateInit2 for more information about the strategy parameter.) Also "a"
+   deflateInit2 for more information about the strategy parameter.)  'T' will
-   can be used instead of "w" to request that the gzip stream that will be
+   request transparent writing or appending with no compression and not using
-   written be appended to the file.  "+" will result in an error, since reading
+   the gzip format.
-   and writing to the same gzip file is not supported.
+
+     "a" can be used instead of "w" to request that the gzip stream that will
+   be written be appended to the file.  "+" will result in an error, since
+   reading and writing to the same gzip file is not supported.
+
+     These functions, as well as gzip, will read and decode a sequence of gzip
+   streams in a file.  The append function of gzopen() can be used to create
+   such a file.  (Also see gzflush() for another way to do this.)  When
+   appending, gzopen does not test whether the file begins with a gzip stream,
+   nor does it look for the end of the gzip streams to begin appending.  gzopen
+   will simply append a gzip stream to the existing file.
 
      gzopen can be used to read a file which is not in gzip format; in this
-   case gzread will directly read from the file without decompression.
+   case gzread will directly read from the file without decompression.  When
+   reading, this will be detected automatically by looking for the magic two-
+   byte gzip header.
 
      gzopen returns NULL if the file could not be opened, if there was
    insufficient memory to allocate the gzFile state, or if an invalid mode was
@@ -1197,7 +1246,11 @@ ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
    descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor
    fd.  If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd,
    mode);.  The duplicated descriptor should be saved to avoid a leak, since
-   gzdopen does not close fd if it fails.
+   gzdopen does not close fd if it fails.  If you are using fileno() to get the
+   file descriptor from a FILE *, then you will have to use dup() to avoid
+   double-close()ing the file descriptor.  Both gzclose() and fclose() will
+   close the associated file descriptor, so they need to have different file
+   descriptors.
 
      gzdopen returns NULL if there was insufficient memory to allocate the
    gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not
@@ -1235,14 +1288,26 @@ ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
 ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
 /*
      Reads the given number of uncompressed bytes from the compressed file.  If
-   the input file was not in gzip format, gzread copies the given number of
+   the input file is not in gzip format, gzread copies the given number of
-   bytes into the buffer.
+   bytes into the buffer directly from the file.
 
      After reaching the end of a gzip stream in the input, gzread will continue
-   to read, looking for another gzip stream, or failing that, reading the rest
+   to read, looking for another gzip stream.  Any number of gzip streams may be
-   of the input file directly without decompression.  The entire input file
+   concatenated in the input file, and will all be decompressed by gzread().
-   will be read if gzread is called until it returns less than the requested
+   If something other than a gzip stream is encountered after a gzip stream,
-   len.
+   that remaining trailing garbage is ignored (and no error is returned).
+
+     gzread can be used to read a gzip file that is being concurrently written.
+   Upon reaching the end of the input, gzread will return with the available
+   data.  If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then
+   gzclearerr can be used to clear the end of file indicator in order to permit
+   gzread to be tried again.  Z_OK indicates that a gzip stream was completed
+   on the last gzread.  Z_BUF_ERROR indicates that the input file ended in the
+   middle of a gzip stream.  Note that gzread does not return -1 in the event
+   of an incomplete gzip stream.  This error is deferred until gzclose(), which
+   will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip
+   stream.  Alternatively, gzerror can be used before gzclose to detect this
+   case.
 
      gzread returns the number of uncompressed bytes actually read, less than
    len for end of file, or -1 for error.
@@ -1256,7 +1321,7 @@ ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
    error.
 */
 
-ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...));
+ZEXTERN int ZEXPORTVA gzprintf Z_ARG((gzFile file, const char *format, ...));
 /*
      Converts, formats, and writes the arguments to the compressed file under
    control of the format string, as in fprintf.  gzprintf returns the number of
@@ -1298,10 +1363,13 @@ ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
    returns the value that was written, or -1 in case of error.
 */
 
-ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
 /*
+ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
      Reads one byte from the compressed file.  gzgetc returns this byte or -1
-   in case of end of file or error.
+   in case of end of file or error.  This is implemented as a macro for speed.
+   As such, it does not do all of the checking the other functions do.  I.e.
+   it does not check to see if file is NULL, nor whether the structure file
+   points to has been clobbered or not.
 */
 
 ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
@@ -1397,9 +1465,7 @@ ZEXTERN int ZEXPORT gzeof OF((gzFile file));
 ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
 /*
      Returns true (1) if file is being copied directly while reading, or false
-   (0) if file is a gzip stream being decompressed.  This state can change from
+   (0) if file is a gzip stream being decompressed.
-   false to true while reading the input file if the end of a gzip stream is
-   reached, but is followed by data that is not another gzip stream.
 
      If the input file is empty, gzdirect() will return true, since the input
    does not contain a gzip stream.
@@ -1408,6 +1474,13 @@ ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
    cause buffers to be allocated to allow reading the file to determine if it
    is a gzip file.  Therefore if gzbuffer() is used, it should be called before
    gzdirect().
+
+     When writing, gzdirect() returns true (1) if transparent writing was
+   requested ("wT" for the gzopen() mode), or false (0) otherwise.  (Note:
+   gzdirect() is not needed when writing.  Transparent writing must be
+   explicitly requested, so the application already knows the answer.  When
+   linking statically, using gzdirect() will include all of the zlib code for
+   gzip file reading and decompression, which may not be desired.)
 */
 
 ZEXTERN int ZEXPORT    gzclose OF((gzFile file));
@@ -1419,7 +1492,8 @@ ZEXTERN int ZEXPORT    gzclose OF((gzFile file));
    must not be called more than once on the same allocation.
 
      gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a
-   file operation error, or Z_OK on success.
+   file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the
+   last read ended in the middle of a gzip stream, or Z_OK on success.
 */
 
 ZEXTERN int ZEXPORT gzclose_r OF((gzFile file));
@@ -1457,6 +1531,7 @@ ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
    file that is being written concurrently.
 */
 
+#endif /* !Z_SOLO */
 
                         /* checksum functions */
 
@@ -1492,7 +1567,9 @@ ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
      Combine two Adler-32 checksums into one.  For two sequences of bytes, seq1
    and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
    each, adler1 and adler2.  adler32_combine() returns the Adler-32 checksum of
-   seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.
+   seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.  Note
+   that the z_off_t type (like off_t) is a signed integer.  If len2 is
+   negative, the result has no meaning or utility.
 */
 
 ZEXTERN uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
@@ -1544,41 +1621,75 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
                                          const char *version,
                                          int stream_size));
 #define deflateInit(strm, level) \
-        deflateInit_((strm), (level),       ZLIB_VERSION, sizeof(z_stream))
+        deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream))
 #define inflateInit(strm) \
-        inflateInit_((strm),                ZLIB_VERSION, sizeof(z_stream))
+        inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream))
 #define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
         deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
-                      (strategy),           ZLIB_VERSION, sizeof(z_stream))
+                      (strategy), ZLIB_VERSION, (int)sizeof(z_stream))
 #define inflateInit2(strm, windowBits) \
-        inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
+        inflateInit2_((strm), (windowBits), ZLIB_VERSION, \
+                      (int)sizeof(z_stream))
 #define inflateBackInit(strm, windowBits, window) \
         inflateBackInit_((strm), (windowBits), (window), \
-                                            ZLIB_VERSION, sizeof(z_stream))
+                      ZLIB_VERSION, (int)sizeof(z_stream))
 
-#ifdef _LARGEFILE64_SOURCE
+#ifndef Z_SOLO
+
+/* gzgetc() macro and its supporting function and exposed data structure.  Note
+ * that the real internal state is much larger than the exposed structure.
+ * This abbreviated structure exposes just enough for the gzgetc() macro.  The
+ * user should not mess with these exposed elements, since their names or
+ * behavior could change in the future, perhaps even capriciously.  They can
+ * only be used by the gzgetc() macro.  You have been warned.
+ */
+struct gzFile_s {
+    unsigned have;
+    unsigned char *next;
+    z_off64_t pos;
+};
+ZEXTERN int ZEXPORT gzgetc_ OF((gzFile file));
+#define gzgetc(g) \
+    ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : gzgetc_(g))
+
+/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
+ * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
+ * both are true, the application gets the *64 functions, and the regular
+ * functions are changed to 64 bits) -- in case these are set on systems
+ * without large file support, _LFS64_LARGEFILE must also be true
+ */
+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
    ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
-   ZEXTERN off64_t ZEXPORT gzseek64 OF((gzFile, off64_t, int));
+   ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
-   ZEXTERN off64_t ZEXPORT gztell64 OF((gzFile));
+   ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
-   ZEXTERN off64_t ZEXPORT gzoffset64 OF((gzFile));
+   ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
-   ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, off64_t));
+   ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t));
-   ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, off64_t));
+   ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
 #endif
 
-#if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS == 64
+#if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS-0 == 64 && _LFS64_LARGEFILE-0
-#  define gzopen gzopen64
+#  ifdef Z_PREFIX_SET
-#  define gzseek gzseek64
+#    define z_gzopen z_gzopen64
-#  define gztell gztell64
+#    define z_gzseek z_gzseek64
-#  define gzoffset gzoffset64
+#    define z_gztell z_gztell64
-#  define adler32_combine adler32_combine64
+#    define z_gzoffset z_gzoffset64
-#  define crc32_combine crc32_combine64
+#    define z_adler32_combine z_adler32_combine64
+#    define z_crc32_combine z_crc32_combine64
+#  else
+#    define gzopen gzopen64
+#    define gzseek gzseek64
+#    define gztell gztell64
+#    define gzoffset gzoffset64
+#    define adler32_combine adler32_combine64
+#    define crc32_combine crc32_combine64
+#  endif
 #  ifndef _LARGEFILE64_SOURCE
      ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
-     ZEXTERN off_t ZEXPORT gzseek64 OF((gzFile, off_t, int));
+     ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
-     ZEXTERN off_t ZEXPORT gztell64 OF((gzFile));
+     ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
-     ZEXTERN off_t ZEXPORT gzoffset64 OF((gzFile));
+     ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile));
-     ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, off_t));
+     ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
-     ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, off_t));
+     ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
 #  endif
 #else
    ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *));
@@ -1589,14 +1700,28 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
    ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
 #endif
 
+#else /* Z_SOLO */
+
+   ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+   ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+
+#endif /* !Z_SOLO */
+
+/* hack for buggy compilers */
 #if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL)
-    struct internal_state {int dummy;}; /* hack for buggy compilers */
+    struct internal_state {int dummy;};
 #endif
 
+/* undocumented functions */
 ZEXTERN const char   * ZEXPORT zError           OF((int));
 ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp));
 ZEXTERN const uLongf * ZEXPORT get_crc_table    OF((void));
 ZEXTERN int            ZEXPORT inflateUndermine OF((z_streamp, int));
+ZEXTERN int            ZEXPORT inflateResetKeep OF((z_streamp));
+ZEXTERN int            ZEXPORT deflateResetKeep OF((z_streamp));
+#ifndef Z_SOLO
+  ZEXTERN unsigned long  ZEXPORT gzflags          OF((void));
+#endif
 
 #ifdef __cplusplus
 }

zlib.map

@@ -66,3 +66,17 @@ ZLIB_1.2.3.5 {
     gzclose_r;
     gzclose_w;
 } ZLIB_1.2.3.4;
+
+ZLIB_1.2.5.1 {
+    deflatePending;
+} ZLIB_1.2.3.5;
+
+ZLIB_1.2.5.2 {
+    gzflags;
+    gzgetc_;
+    inflateResetKeep;
+} ZLIB_1.2.5.1;
+
+ZLIB_1.2.5.3 {
+    deflateResetKeep;
+} ZLIB_1.2.5.2;

zlib.pc.in

@@ -1,6 +1,7 @@
 prefix=@prefix@
 exec_prefix=@exec_prefix@
 libdir=@libdir@
+sharedlibdir=@sharedlibdir@
 includedir=@includedir@
 
 Name: zlib
@@ -8,5 +9,5 @@ Description: zlib compression library
 Version: @VERSION@
 
 Requires:
-Libs: -L${libdir} -lz
+Libs: -L${libdir} -L${sharedlibdir} -lz
 Cflags: -I${includedir}

zutil.c

@@ -1,5 +1,5 @@
 /* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-2005 Jean-loup Gailly.
+ * Copyright (C) 1995-2005, 2010, 2011 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -85,31 +85,11 @@ uLong ZEXPORT zlibCompileFlags()
 #ifdef FASTEST
     flags += 1L << 21;
 #endif
-#ifdef STDC
+#ifdef Z_SOLO
-#  ifdef NO_vsnprintf
-        flags += 1L << 25;
-#    ifdef HAS_vsprintf_void
-        flags += 1L << 26;
-#    endif
-#  else
-#    ifdef HAS_vsnprintf_void
-        flags += 1L << 26;
-#    endif
-#  endif
-#else
-        flags += 1L << 24;
-#  ifdef NO_snprintf
-        flags += 1L << 25;
-#    ifdef HAS_sprintf_void
-        flags += 1L << 26;
-#    endif
-#  else
-#    ifdef HAS_snprintf_void
-        flags += 1L << 26;
-#    endif
-#  endif
-#endif
     return flags;
+#else
+    return flags + gzflags();
+#endif
 }
 
 #ifdef DEBUG
@@ -117,9 +97,9 @@ uLong ZEXPORT zlibCompileFlags()
 #  ifndef verbose
 #    define verbose 0
 #  endif
-int z_verbose = verbose;
+int ZLIB_INTERNAL z_verbose = verbose;
 
-void z_error (m)
+void ZLIB_INTERNAL z_error (m)
     char *m;
 {
     fprintf(stderr, "%s\n", m);
@@ -146,7 +126,7 @@ const char * ZEXPORT zError(err)
 
 #ifndef HAVE_MEMCPY
 
-void zmemcpy(dest, source, len)
+void ZLIB_INTERNAL zmemcpy(dest, source, len)
     Bytef* dest;
     const Bytef* source;
     uInt  len;
@@ -157,7 +137,7 @@ void zmemcpy(dest, source, len)
     } while (--len != 0);
 }
 
-int zmemcmp(s1, s2, len)
+int ZLIB_INTERNAL zmemcmp(s1, s2, len)
     const Bytef* s1;
     const Bytef* s2;
     uInt  len;
@@ -170,7 +150,7 @@ int zmemcmp(s1, s2, len)
     return 0;
 }
 
-void zmemzero(dest, len)
+void ZLIB_INTERNAL zmemzero(dest, len)
     Bytef* dest;
     uInt  len;
 {
@@ -181,6 +161,7 @@ void zmemzero(dest, len)
 }
 #endif
 
+#ifndef Z_SOLO
 
 #ifdef SYS16BIT
 
@@ -213,7 +194,7 @@ local ptr_table table[MAX_PTR];
  * a protected system like OS/2. Use Microsoft C instead.
  */
 
-voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
+voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, unsigned items, unsigned size)
 {
     voidpf buf = opaque; /* just to make some compilers happy */
     ulg bsize = (ulg)items*size;
@@ -237,7 +218,7 @@ voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
     return buf;
 }
 
-void  zcfree (voidpf opaque, voidpf ptr)
+void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
 {
     int n;
     if (*(ush*)&ptr != 0) { /* object < 64K */
@@ -272,13 +253,13 @@ void  zcfree (voidpf opaque, voidpf ptr)
 #  define _hfree   hfree
 #endif
 
-voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
+voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, uInt items, uInt size)
 {
     if (opaque) opaque = 0; /* to make compiler happy */
     return _halloc((long)items, size);
 }
 
-void  zcfree (voidpf opaque, voidpf ptr)
+void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
 {
     if (opaque) opaque = 0; /* to make compiler happy */
     _hfree(ptr);
@@ -297,7 +278,7 @@ extern voidp  calloc OF((uInt items, uInt size));
 extern void   free   OF((voidpf ptr));
 #endif
 
-voidpf zcalloc (opaque, items, size)
+voidpf ZLIB_INTERNAL zcalloc (opaque, items, size)
     voidpf opaque;
     unsigned items;
     unsigned size;
@@ -307,7 +288,7 @@ voidpf zcalloc (opaque, items, size)
                               (voidpf)calloc(items, size);
 }
 
-void  zcfree (opaque, ptr)
+void ZLIB_INTERNAL zcfree (opaque, ptr)
     voidpf opaque;
     voidpf ptr;
 {
@@ -316,3 +297,5 @@ void  zcfree (opaque, ptr)
 }
 
 #endif /* MY_ZCALLOC */
+
+#endif /* !Z_SOLO */

zutil.h

@@ -1,5 +1,5 @@
 /* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995-2010 Jean-loup Gailly.
+ * Copyright (C) 1995-2011 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -13,28 +13,24 @@
 #ifndef ZUTIL_H
 #define ZUTIL_H
 
-#define ZLIB_INTERNAL
+#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33) && !defined(NO_VIZ)
+#  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
+#else
+#  define ZLIB_INTERNAL
+#endif
+
 #include "zlib.h"
 
-#ifdef STDC
+#if defined(STDC) && !defined(Z_SOLO)
-#  if !(defined(_WIN32_WCE) && defined(_MSV_VER))
+#  if !(defined(_WIN32_WCE) && defined(_MSC_VER))
 #    include <stddef.h>
 #  endif
 #  include <string.h>
 #  include <stdlib.h>
 #endif
 
-#if defined(UNDER_CE) && defined(NO_ERRNO_H)
+#ifdef Z_SOLO
-#  define zseterrno(ERR) SetLastError((DWORD)(ERR))
+   typedef long ptrdiff_t;  /* guess -- will be caught if guess is wrong */
-#  define zerrno() ((int)GetLastError())
-#else
-#  ifdef NO_ERRNO_H
-     extern int errno;
-#  else
-#    include <errno.h>
-#  endif
-#  define zseterrno(ERR) do { errno = (ERR); } while (0)
-#  define zerrno() errno
 #endif
 
 #ifndef local
@@ -86,16 +82,18 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 
 #if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32))
 #  define OS_CODE  0x00
-#  if defined(__TURBOC__) || defined(__BORLANDC__)
+#  ifndef Z_SOLO
-#    if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
+#    if defined(__TURBOC__) || defined(__BORLANDC__)
-       /* Allow compilation with ANSI keywords only enabled */
+#      if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
-       void _Cdecl farfree( void *block );
+         /* Allow compilation with ANSI keywords only enabled */
-       void *_Cdecl farmalloc( unsigned long nbytes );
+         void _Cdecl farfree( void *block );
-#    else
+         void *_Cdecl farmalloc( unsigned long nbytes );
-#      include <alloc.h>
+#      else
+#        include <alloc.h>
+#      endif
+#    else /* MSC or DJGPP */
+#      include <malloc.h>
 #    endif
-#  else /* MSC or DJGPP */
-#    include <malloc.h>
 #  endif
 #endif
 
@@ -115,18 +113,20 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 
 #ifdef OS2
 #  define OS_CODE  0x06
-#  ifdef M_I86
+#  if defined(M_I86) && !defined(Z_SOLO)
 #    include <malloc.h>
 #  endif
 #endif
 
 #if defined(MACOS) || defined(TARGET_OS_MAC)
 #  define OS_CODE  0x07
-#  if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
+#  ifndef Z_SOLO
-#    include <unix.h> /* for fdopen */
+#    if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
-#  else
+#      include <unix.h> /* for fdopen */
-#    ifndef fdopen
+#    else
-#      define fdopen(fd,mode) NULL /* No fdopen() */
+#      ifndef fdopen
+#        define fdopen(fd,mode) NULL /* No fdopen() */
+#      endif
 #    endif
 #  endif
 #endif
@@ -161,16 +161,16 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 #  endif
 #endif
 
-#if defined(__BORLANDC__)
+#if defined(__BORLANDC__) && !defined(MSDOS)
   #pragma warn -8004
   #pragma warn -8008
   #pragma warn -8066
 #endif
 
-#ifdef _LARGEFILE64_SOURCE
+/* provide prototypes for these when building zlib without LFS */
-#  define z_off64_t off64_t
+#if !defined(_WIN32) && (!defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0)
-#else
+    ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
-#  define z_off64_t z_off_t
+    ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
 #endif
 
         /* common defaults */
@@ -181,52 +181,11 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 
 #ifndef F_OPEN
 #  define F_OPEN(name, mode) fopen((name), (mode))
-#endif
-
-#ifdef _LARGEFILE64_SOURCE
-#  define F_OPEN64(name, mode) fopen64((name), (mode))
-#else
-#  define F_OPEN64(name, mode) fopen((name), (mode))
 #endif
 
          /* functions */
 
-#if defined(STDC99) || (defined(__TURBOC__) && __TURBOC__ >= 0x550)
+#if defined(pyr) || defined(Z_SOLO)
-#  ifndef HAVE_VSNPRINTF
-#    define HAVE_VSNPRINTF
-#  endif
-#endif
-#if defined(__CYGWIN__)
-#  ifndef HAVE_VSNPRINTF
-#    define HAVE_VSNPRINTF
-#  endif
-#endif
-#ifndef HAVE_VSNPRINTF
-#  ifdef MSDOS
-     /* vsnprintf may exist on some MS-DOS compilers (DJGPP?),
-        but for now we just assume it doesn't. */
-#    define NO_vsnprintf
-#  endif
-#  ifdef __TURBOC__
-#    define NO_vsnprintf
-#  endif
-#  ifdef WIN32
-     /* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */
-#    if !defined(vsnprintf) && !defined(NO_vsnprintf)
-#      if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 )
-#         define vsnprintf _vsnprintf
-#      endif
-#    endif
-#  endif
-#  ifdef __SASC
-#    define NO_vsnprintf
-#  endif
-#endif
-#ifdef VMS
-#  define NO_vsnprintf
-#endif
-
-#if defined(pyr)
 #  define NO_MEMCPY
 #endif
 #if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__)
@@ -250,16 +209,16 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 #    define zmemzero(dest, len) memset(dest, 0, len)
 #  endif
 #else
-   extern void zmemcpy  OF((Bytef* dest, const Bytef* source, uInt len));
+   void ZLIB_INTERNAL zmemcpy OF((Bytef* dest, const Bytef* source, uInt len));
-   extern int  zmemcmp  OF((const Bytef* s1, const Bytef* s2, uInt len));
+   int ZLIB_INTERNAL zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len));
-   extern void zmemzero OF((Bytef* dest, uInt len));
+   void ZLIB_INTERNAL zmemzero OF((Bytef* dest, uInt len));
 #endif
 
 /* Diagnostic functions */
 #ifdef DEBUG
 #  include <stdio.h>
-   extern int z_verbose;
+   extern int ZLIB_INTERNAL z_verbose;
-   extern void z_error    OF((char *m));
+   extern void ZLIB_INTERNAL z_error OF((char *m));
 #  define Assert(cond,msg) {if(!(cond)) z_error(msg);}
 #  define Trace(x) {if (z_verbose>=0) fprintf x ;}
 #  define Tracev(x) {if (z_verbose>0) fprintf x ;}
@@ -275,9 +234,11 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
 #  define Tracecv(c,x)
 #endif
 
-
+#ifndef Z_SOLO
-voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size));
+   voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items,
-void   zcfree  OF((voidpf opaque, voidpf ptr));
+                                    unsigned size));
+   void ZLIB_INTERNAL zcfree  OF((voidpf opaque, voidpf ptr));
+#endif
 
 #define ZALLOC(strm, items, size) \
            (*((strm)->zalloc))((strm)->opaque, (items), (size))