zlib 1.2.2.3

ChangeLog

@@ -1,11 +1,108 @@
 
                 ChangeLog file for zlib
 
+Changes in 1.2.2.3 (27 May 2005)
+- Replace 1U constants in inflate.c and inftrees.c for 64-bit compile
+- Typecast fread() return values in gzio.c [Vollant]
+- Remove trailing space in minigzip.c outmode (VC++ can't deal with it)
+- Fix crc check bug in gzread() after gzungetc() [Heiner]
+- Add the deflateTune() function to adjust internal compression parameters
+- Add a fast gzip decompressor, gun.c, to examples (use of inflateBack)
+- Remove an incorrect assertion in examples/zpipe.c
+- Add C++ wrapper in infback9.h [Donais]
+- Fix bug in inflateCopy() when decoding fixed codes
+- Note in zlib.h how much deflateSetDictionary() actually uses
+- Remove USE_DICT_HEAD in deflate.c (would mess up inflate if used)
+- Add _WIN32_WCE to define WIN32 in zconf.in.h [Spencer]
+- Don't include stderr.h or errno.h for _WIN32_WCE in zutil.h [Spencer]
+- Add gzdirect() function to indicate transparent reads
+- Update contrib/minizip [Vollant]
+- Fix compilation of deflate.c when both ASMV and FASTEST [Oberhumer]
+- Add casts in crc32.c to avoid warnings [Oberhumer]
+- Add contrib/masmx64 [Vollant]
+- Update contrib/asm586, asm686, masmx86, testzlib, vstudio [Vollant]
+
+Changes in 1.2.2.2 (30 December 2004)
+- Replace structure assignments in deflate.c and inflate.c with zmemcpy to
+  avoid implicit memcpy calls (portability for no-library compilation)
+- Increase sprintf() buffer size in gzdopen() to allow for large numbers
+- Add INFLATE_STRICT to check distances against zlib header
+- Improve WinCE errno handling and comments [Chang]
+- Remove comment about no gzip header processing in FAQ
+- Add Z_FIXED strategy option to deflateInit2() to force fixed trees
+- Add updated make_vms.com [Coghlan], update README
+- Create a new "examples" directory, move gzappend.c there, add zpipe.c,
+  fitblk.c, gzlog.[ch], gzjoin.c, and zlib_how.html.
+- Add FAQ entry and comments in deflate.c on uninitialized memory access
+- Add Solaris 9 make options in configure [Gilbert]
+- Allow strerror() usage in gzio.c for STDC
+- Fix DecompressBuf in contrib/delphi/ZLib.pas [ManChesTer]
+- Update contrib/masmx86/inffas32.asm and gvmat32.asm [Vollant]
+- Use z_off_t for adler32_combine() and crc32_combine() lengths
+- Make adler32() much faster for small len
+- Use OS_CODE in deflate() default gzip header
+
+Changes in 1.2.2.1 (31 October 2004)
+- Allow inflateSetDictionary() call for raw inflate
+- Fix inflate header crc check bug for file names and comments
+- Add deflateSetHeader() and gz_header structure for custom gzip headers
+- Add inflateGetheader() to retrieve gzip headers
+- Add crc32_combine() and adler32_combine() functions
+- Add alloc_func, free_func, in_func, out_func to Z_PREFIX list
+- Use zstreamp consistently in zlib.h (inflate_back functions)
+- Remove GUNZIP condition from definition of inflate_mode in inflate.h
+  and in contrib/inflate86/inffast.S [Truta, Anderson]
+- Add support for AMD64 in contrib/inflate86/inffas86.c [Anderson]
+- Update projects/README.projects and projects/visualc6 [Truta]
+- Update win32/DLL_FAQ.txt [Truta]
+- Avoid warning under NO_GZCOMPRESS in gzio.c; fix typo [Truta]
+- Deprecate Z_ASCII; use Z_TEXT instead [Truta]
+- Use a new algorithm for setting strm->data_type in trees.c [Truta]
+- Do not define an exit() prototype in zutil.c unless DEBUG defined
+- Remove prototype of exit() from zutil.c, example.c, minigzip.c [Truta]
+- Add comment in zlib.h for Z_NO_FLUSH parameter to deflate()
+- Fix Darwin build version identification [Peterson]
+
+Changes in 1.2.2 (3 October 2004)
+- Update zlib.h comments on gzip in-memory processing
+- Set adler to 1 in inflateReset() to support Java test suite [Walles]
+- Add contrib/dotzlib [Ravn]
+- Update win32/DLL_FAQ.txt [Truta]
+- Update contrib/minizip [Vollant]
+- Move contrib/visual-basic.txt to old/ [Truta]
+- Fix assembler builds in projects/visualc6/ [Truta]
+
+Changes in 1.2.1.2 (9 September 2004)
+- Update INDEX file
+- Fix trees.c to update strm->data_type (no one ever noticed!)
+- Fix bug in error case in inflate.c, infback.c, and infback9.c [Brown]
+- Add "volatile" to crc table flag declaration (for DYNAMIC_CRC_TABLE)
+- Add limited multitasking protection to DYNAMIC_CRC_TABLE
+- Add NO_vsnprintf for VMS in zutil.h [Mozilla]
+- Don't declare strerror() under VMS [Mozilla]
+- Add comment to DYNAMIC_CRC_TABLE to use get_crc_table() to initialize
+- Update contrib/ada [Anisimkov]
+- Update contrib/minizip [Vollant]
+- Fix configure to not hardcode directories for Darwin [Peterson]
+- Fix gzio.c to not return error on empty files [Brown]
+- Fix indentation; update version in contrib/delphi/ZLib.pas and
+  contrib/pascal/zlibpas.pas [Truta]
+- Update mkasm.bat in contrib/masmx86 [Truta]
+- Update contrib/untgz [Truta]
+- Add projects/README.projects [Truta]
+- Add project for MS Visual C++ 6.0 in projects/visualc6 [Cadieux, Truta]
+- Update win32/DLL_FAQ.txt [Truta]
+- Update list of Z_PREFIX symbols in zconf.h [Randers-Pehrson, Truta]
+- Remove an unnecessary assignment to curr in inftrees.c [Truta]
+- Add OS/2 to exe builds in configure [Poltorak]
+- Remove err dummy parameter in zlib.h [Kientzle]
+
 Changes in 1.2.1.1 (9 January 2004)
-- Updated email address in README
+- Update email address in README
 - Several FAQ updates
-- Fixed a big fat bug in inftrees.c that prevented decoding valid
+- Fix a big fat bug in inftrees.c that prevented decoding valid
-  dynamic blocks with only literals and no distance codes.
+  dynamic blocks with only literals and no distance codes --
+  Thanks to "Hot Emu" for the bug report and sample file
 - Add a note to puff.c on no distance codes case.
 
 Changes in 1.2.1 (17 November 2003)

FAQ

@@ -148,13 +148,6 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
     format using deflateInit2(). You can also request that inflate decode
     the gzip format using inflateInit2(). Read zlib.h for more details.
 
-    Note that you cannot specify special gzip header contents (e.g. a file
-    name or modification date), nor will inflate tell you what was in the
-    gzip header. If you need to customize the header or see what's in it,
-    you can use the raw deflate and inflate operations and the crc32()
-    function and roll your own gzip encoding and decoding. Read the gzip
-    RFC 1952 for details of the header and trailer format.
-
 21. Is zlib thread-safe?
 
     Yes. However any library routines that zlib uses and any application-
@@ -295,20 +288,29 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
     were downright silly. So now, we simply make sure that the code always
     works.
 
-36. Will zlib read the (insert any ancient or arcane format here) compressed
+36. Valgrind (or some similar memory access checker) says that deflate is
+    performing a conditional jump that depends on an uninitialized value.
+    Isn't that a bug?
+
+    No.  That is intentional for performance reasons, and the output of
+    deflate is not affected.  This only started showing up recently since
+    zlib 1.2.x uses malloc() by default for allocations, whereas earlier
+    versions used calloc(), which zeros out the allocated memory.
+
+37. Will zlib read the (insert any ancient or arcane format here) compressed
     data format?
 
     Probably not. Look in the comp.compression FAQ for pointers to various
     formats and associated software.
 
-37. How can I encrypt/decrypt zip files with zlib?
+38. How can I encrypt/decrypt zip files with zlib?
 
     zlib doesn't support encryption. The original PKZIP encryption is very weak
     and can be broken with freely available programs. To get strong encryption,
     use GnuPG, http://www.gnupg.org/ , which already includes zlib compression.
     For PKZIP compatible "encryption", look at http://www.info-zip.org/
 
-38. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings?
+39. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings?
 
     "gzip" is the gzip format, and "deflate" is the zlib format. They should
     probably have called the second one "zlib" instead to avoid confusion
@@ -324,14 +326,14 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
 
     Bottom line: use the gzip format for HTTP 1.1 encoding.
 
-39. Does zlib support the new "Deflate64" format introduced by PKWare?
+40. Does zlib support the new "Deflate64" format introduced by PKWare?
 
     No. PKWare has apparently decided to keep that format proprietary, since
     they have not documented it as they have previous compression formats.
     In any case, the compression improvements are so modest compared to other
     more modern approaches, that it's not worth the effort to implement.
 
-40. Can you please sign these lengthy legal documents and fax them back to us
+41. Can you please sign these lengthy legal documents and fax them back to us
     so that we can use your software in our product?
 
     No. Go away. Shoo.

INDEX

@@ -8,9 +8,12 @@ algorithm.txt   description of the (de)compression algorithm
 configure       configure script for Unix
 zconf.in.h      template for zconf.h (used by configure)
 
+amiga/          makefiles for Amiga SAS C
+as400/          makefiles for IBM AS/400
 msdos/          makefiles for MSDOS
 old/            makefiles for various architectures and zlib documentation
                 files that have not yet been updated for zlib 1.2.x
+projects/       projects for various Integrated Development Environments
 qnx/            makefiles for QNX
 win32/          makefiles for Windows
 

Makefile

@@ -30,7 +30,7 @@ CPP=$(CC) -E
 
 LIBS=libz.a
 SHAREDLIB=libz.so
-SHAREDLIBV=libz.so.1.2.1.1
+SHAREDLIBV=libz.so.1.2.2.3
 SHAREDLIBM=libz.so.1
 
 AR=ar rc

Makefile.in

@@ -30,7 +30,7 @@ CPP=$(CC) -E
 
 LIBS=libz.a
 SHAREDLIB=libz.so
-SHAREDLIBV=libz.so.1.2.1.1
+SHAREDLIBV=libz.so.1.2.2.3
 SHAREDLIBM=libz.so.1
 
 AR=ar rc

README

@@ -1,6 +1,6 @@
 ZLIB DATA COMPRESSION LIBRARY
 
-zlib 1.2.1.1 is a general purpose data compression library.  All the code is
+zlib 1.2.2.3 is a general purpose data compression library.  All the code is
 thread safe.  The data format used by the zlib library is described by RFCs
 (Request for Comments) 1950 to 1952 in the files
 http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
@@ -16,9 +16,8 @@ minigzip.c.
 
 To compile all files and run the test program, follow the instructions given at
 the top of Makefile. In short "make test; make install" should work for most
-machines. For Unix: "./configure; make test; make install" For MSDOS, use one
+machines. For Unix: "./configure; make test; make install". For MSDOS, use one
-of the special makefiles such as Makefile.msc. For VMS, use Make_vms.com or
+of the special makefiles such as Makefile.msc. For VMS, use make_vms.com.
-descrip.mms.
 
 Questions about zlib should be sent to <zlib@gzip.org>, or to Gilles Vollant
 <info@winimage.com> for the Windows DLL version. The zlib home page is
@@ -34,7 +33,7 @@ Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan. 1997
 issue of  Dr. Dobb's Journal; a copy of the article is available in
 http://dogma.net/markn/articles/zlibtool/zlibtool.htm
 
-The changes made in version 1.2.1.1 are documented in the file ChangeLog.
+The changes made in version 1.2.2.3 are documented in the file ChangeLog.
 
 Unsupported third party contributions are provided in directory "contrib".
 
@@ -93,7 +92,7 @@ Acknowledgments:
 
 Copyright notice:
 
- (C) 1995-2003 Jean-loup Gailly and Mark Adler
+ (C) 1995-2004 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages

adler32.c

@@ -1,5 +1,5 @@
 /* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2004 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -12,12 +12,13 @@
 #define NMAX 5552
 /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
 
-#define DO1(buf,i)  {s1 += buf[i]; s2 += s1;}
+#define DO1(buf,i)  {adler += (buf)[i]; sum2 += adler;}
 #define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
 #define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
 #define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
 #define DO16(buf)   DO8(buf,0); DO8(buf,8);
 
+/* use NO_DIVIDE if your processor does not do division in hardware */
 #ifdef NO_DIVIDE
 #  define MOD(a) \
     do { \
@@ -39,8 +40,17 @@
         if (a >= (BASE << 1)) a -= (BASE << 1); \
         if (a >= BASE) a -= BASE; \
     } while (0)
+#  define MOD4(a) \
+    do { \
+        if (a >= (BASE << 4)) a -= (BASE << 4); \
+        if (a >= (BASE << 3)) a -= (BASE << 3); \
+        if (a >= (BASE << 2)) a -= (BASE << 2); \
+        if (a >= (BASE << 1)) a -= (BASE << 1); \
+        if (a >= BASE) a -= BASE; \
+    } while (0)
 #else
 #  define MOD(a) a %= BASE
+#  define MOD4(a) a %= BASE
 #endif
 
 /* ========================================================================= */
@@ -49,26 +59,91 @@ uLong ZEXPORT adler32(adler, buf, len)
     const Bytef *buf;
     uInt len;
 {
-    unsigned long s1 = adler & 0xffff;
+    unsigned long sum2;
-    unsigned long s2 = (adler >> 16) & 0xffff;
+    unsigned n;
-    int k;
 
-    if (buf == Z_NULL) return 1L;
+    /* split Adler-32 into component sums */
+    sum2 = (adler >> 16) & 0xffff;
+    adler &= 0xffff;
 
-    while (len > 0) {
+    /* in case user likes doing a byte at a time, keep it fast */
-        k = len < NMAX ? (int)len : NMAX;
+    if (len == 1) {
-        len -= k;
+        adler += buf[0];
-        while (k >= 16) {
+        if (adler >= BASE)
+            adler -= BASE;
+        sum2 += adler;
+        if (sum2 >= BASE)
+            sum2 -= BASE;
+        return adler | (sum2 << 16);
+    }
+
+    /* initial Adler-32 value (deferred check for len == 1 speed) */
+    if (buf == Z_NULL)
+        return 1L;
+
+    /* in case short lengths are provided, keep it somewhat fast */
+    if (len < 16) {
+        while (len--) {
+            adler += *buf++;
+            sum2 += adler;
+        }
+        if (adler >= BASE)
+            adler -= BASE;
+        MOD4(sum2);             /* only added so many BASE's */
+        return adler | (sum2 << 16);
+    }
+
+    /* do length NMAX blocks -- requires just one modulo operation */
+    while (len >= NMAX) {
+        len -= NMAX;
+        n = NMAX / 16;          /* NMAX is divisible by 16 */
+        do {
+            DO16(buf);          /* 16 sums unrolled */
+            buf += 16;
+        } while (--n);
+        MOD(adler);
+        MOD(sum2);
+    }
+
+    /* do remaining bytes (less than NMAX, still just one modulo) */
+    if (len) {                  /* avoid modulos if none remaining */
+        while (len >= 16) {
+            len -= 16;
             DO16(buf);
             buf += 16;
-            k -= 16;
         }
-        if (k != 0) do {
+        while (len--) {
-            s1 += *buf++;
+            adler += *buf++;
-            s2 += s1;
+            sum2 += adler;
-        } while (--k);
-        MOD(s1);
-        MOD(s2);
         }
-    return (s2 << 16) | s1;
+        MOD(adler);
+        MOD(sum2);
+    }
+
+    /* return recombined sums */
+    return adler | (sum2 << 16);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT adler32_combine(adler1, adler2, len2)
+    uLong adler1;
+    uLong adler2;
+    z_off_t len2;
+{
+    unsigned long sum1;
+    unsigned long sum2;
+    unsigned rem;
+
+    /* the derivation of this formula is left as an exercise for the reader */
+    rem = (unsigned)(len2 % BASE);
+    sum1 = adler1 & 0xffff;
+    sum2 = rem * sum1;
+    MOD(sum2);
+    sum1 += (adler2 & 0xffff) + BASE - 1;
+    sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
+    if (sum1 > BASE) sum1 -= BASE;
+    if (sum1 > BASE) sum1 -= BASE;
+    if (sum2 > (BASE << 1)) sum2 -= (BASE << 1);
+    if (sum2 > BASE) sum2 -= BASE;
+    return sum1 | (sum2 << 16);
 }

as400/compile.clp

@@ -118,6 +118,6 @@
                                  &MODLIB/INFTREES    &MODLIB/TREES       +
                                  &MODLIB/UNCOMPR     &MODLIB/ZUTIL)      +
                           SRCFILE(&SRCLIB/&CTLFILE) SRCMBR(BNDSRC) +
-                          TEXT('ZLIB 1.2.1') TGTRLS(V4R4M0)
+                          TEXT('ZLIB 1.2.2') TGTRLS(V4R4M0)
 
              ENDPGM

as400/readme.txt

@@ -1,4 +1,4 @@
-        ZLIB version 1.2.1 for AS400 installation instructions
+        ZLIB version 1.2.2 for AS400 installation instructions
 
 I) From an AS400 *SAVF file:
 

as400/zlib.inc

@@ -1,7 +1,7 @@
       *  ZLIB.INC - Interface to the general purpose compression library
       *
       *  ILE RPG400 version by Patrick Monnerat, DATASPHERE.
-      *  Version 1.2.1.1
+      *  Version 1.2.2.3
       *
       *
       *  WARNING:
@@ -20,8 +20,12 @@
       *                               Constants
       **************************************************************************
       *
-     D ZLIB_VERSION    C                   '1.2.1.1'                            Header's version
+      *  Versioning information.
-     D ZLIB_VERNUM     C                   X'1211'
+      *
+     D ZLIB_VERSION    C                   '1.2.2.3'
+     D ZLIB_VERNUM     C                   X'1223'
+      *
+      *  Other equates.
       *
      D Z_NO_FLUSH      C                   0
      D Z_SYNC_FLUSH    C                   2

compress.c

@@ -1,5 +1,5 @@
 /* compress.c -- compress a memory buffer
- * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * Copyright (C) 1995-2003 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 

configure

@@ -77,7 +77,7 @@ if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
   CFLAGS="$cflags"
   case `(uname -s || echo unknown) 2>/dev/null` in
   Linux | linux | GNU | GNU/*) LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1"};;
-  CYGWIN* | Cygwin* | cygwin* )
+  CYGWIN* | Cygwin* | cygwin* | OS/2* )
              EXE='.exe';;
   QNX*)  # This is for QNX6. I suppose that the QNX rule below is for QNX2,QNX4
          # (alain.bonnefoy@icbt.com)
@@ -89,9 +89,7 @@ if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
              SHAREDLIB=libz$shared_ext
              SHAREDLIBV=libz.$VER$shared_ext
              SHAREDLIBM=libz.$VER1$shared_ext
-             LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name /usr/lib/$SHAREDLIBV -compatibility_version $VER2 -current_version $VER"}
+             LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER"};;
-             libdir='/usr/lib'
-             includedir='/usr/include';;
   *)             LDSHARED=${LDSHARED-"$cc -shared"};;
   esac
 else
@@ -127,6 +125,9 @@ else
   SunOS\ 4*) SFLAGS=${CFLAGS-"-O2 -PIC"}
              CFLAGS=${CFLAGS-"-O2"}
              LDSHARED=${LDSHARED-"ld"};;
+  SunStudio\ 9*) SFLAGS=${CFLAGS-"-DUSE_MMAP -fast -xcode=pic32 -xtarget=ultra3 -xarch=v9b"}
+             CFLAGS=${CFLAGS-"-DUSE_MMAP -fast -xtarget=ultra3 -xarch=v9b"}
+             LDSHARED=${LDSHARED-"cc -xarch=v9b"};;
   UNIX_System_V\ 4.2.0)
              SFLAGS=${CFLAGS-"-KPIC -O"}
              CFLAGS=${CFLAGS-"-O"}

contrib/README.contrib

@@ -19,8 +19,8 @@ blast/      by Mark Adler <madler@alumni.caltech.edu>
 delphi/     by Cosmin Truta <cosmint@cs.ubbcluj.ro>
         Support for Delphi and C++ Builder
 
-gzappend/   by Mark Adler <madler@alumni.caltech.edu>
+dotzlib/    by Henrik Ravn <henrik@ravn.com>
-        append to a gzip file -- illustrates the use of Z_BLOCK
+        Support for Microsoft .Net and Visual C++ .Net
 
 infback9/   by Mark Adler <madler@alumni.caltech.edu>
         Unsupported diffs to infback to decode the deflate64 format
@@ -42,6 +42,10 @@ masm686/    by Dan Higdon <hdan@kinesoft.com>
             and Chuck Walbourn <chuckw@kinesoft.com>
         asm code for Pentium Pro/PII, using the MASM syntax
 
+masmx64/    by Gilles Vollant <info@winimage.com>
+	x86 64-bit (AMD64 and Intel EM64t) code for x64 assembler to
+	replace longest_match() and inflate_fast()
+
 masmx86/    by Gilles Vollant <info@winimage.com>
         x86 asm code to replace longest_match() and inflate_fast(),
         for Visual C++ and MASM
@@ -60,11 +64,8 @@ puff/       by Mark Adler <madler@alumni.caltech.edu>
 testzlib/   by Gilles Vollant <info@winimage.com>
         Example of the use of zlib
 
-untgz/      by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+untgz/      by Pedro A. Aranda Gutierrez <paag@tid.es>
         A very simple tar.gz file extractor using zlib
 
-visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
-        How to use compress(), uncompress() and the gz* functions from VB
-
 vstudio/    by Gilles Vollant <info@winimage.com>
-        Building zlib with Visual Studio .NET
+        Building a minizip-enhanced zlib with Microsoft Visual Studio

contrib/ada/buffer_demo.adb

@@ -0,0 +1,106 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2004 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+--
+--  $Id: buffer_demo.adb,v 1.3 2004/09/06 06:55:35 vagul Exp $
+
+--  This demo program provided by Dr Steve Sangwine <sjs@essex.ac.uk>
+--
+--  Demonstration of a problem with Zlib-Ada (already fixed) when a buffer
+--  of exactly the correct size is used for decompressed data, and the last
+--  few bytes passed in to Zlib are checksum bytes.
+
+--  This program compresses a string of text, and then decompresses the
+--  compressed text into a buffer of the same size as the original text.
+
+with Ada.Streams; use Ada.Streams;
+with Ada.Text_IO;
+
+with ZLib; use ZLib;
+
+procedure Buffer_Demo is
+   EOL  : Character renames ASCII.LF;
+   Text : constant String
+     := "Four score and seven years ago our fathers brought forth," & EOL &
+        "upon this continent, a new nation, conceived in liberty," & EOL &
+        "and dedicated to the proposition that `all men are created equal'.";
+
+   Source : Stream_Element_Array (1 .. Text'Length);
+   for Source'Address use Text'Address;
+
+begin
+   Ada.Text_IO.Put (Text);
+   Ada.Text_IO.New_Line;
+   Ada.Text_IO.Put_Line
+     ("Uncompressed size : " & Positive'Image (Text'Length) & " bytes");
+
+   declare
+      Compressed_Data : Stream_Element_Array (1 .. Text'Length);
+      L               : Stream_Element_Offset;
+   begin
+      Compress : declare
+         Compressor : Filter_Type;
+         I : Stream_Element_Offset;
+      begin
+         Deflate_Init (Compressor);
+
+         --  Compress the whole of T at once.
+
+         Translate (Compressor, Source, I, Compressed_Data, L, Finish);
+         pragma Assert (I = Source'Last);
+
+         Close (Compressor);
+
+         Ada.Text_IO.Put_Line
+           ("Compressed size :   "
+            & Stream_Element_Offset'Image (L) & " bytes");
+      end Compress;
+
+      --  Now we decompress the data, passing short blocks of data to Zlib
+      --  (because this demonstrates the problem - the last block passed will
+      --  contain checksum information and there will be no output, only a
+      --  check inside Zlib that the checksum is correct).
+
+      Decompress : declare
+         Decompressor : Filter_Type;
+
+         Uncompressed_Data : Stream_Element_Array (1 .. Text'Length);
+
+         Block_Size : constant := 4;
+         --  This makes sure that the last block contains
+         --  only Adler checksum data.
+
+         P : Stream_Element_Offset := Compressed_Data'First - 1;
+         O : Stream_Element_Offset;
+      begin
+         Inflate_Init (Decompressor);
+
+         loop
+            Translate
+              (Decompressor,
+               Compressed_Data
+                 (P + 1 .. Stream_Element_Offset'Min (P + Block_Size, L)),
+               P,
+               Uncompressed_Data
+                 (Total_Out (Decompressor) + 1 .. Uncompressed_Data'Last),
+               O,
+               No_Flush);
+
+               Ada.Text_IO.Put_Line
+                 ("Total in : " & Count'Image (Total_In (Decompressor)) &
+                  ", out : " & Count'Image (Total_Out (Decompressor)));
+
+               exit when P = L;
+         end loop;
+
+         Ada.Text_IO.New_Line;
+         Ada.Text_IO.Put_Line
+           ("Decompressed text matches original text : "
+             & Boolean'Image (Uncompressed_Data = Source));
+      end Decompress;
+   end;
+end Buffer_Demo;

contrib/ada/mtest.adb

@@ -5,10 +5,10 @@
 --                                                            --
 --  Open source license information is in the zlib.ads file.  --
 ----------------------------------------------------------------
---  Continuous test for ZLib multithreading. If the test is fail
+--  Continuous test for ZLib multithreading. If the test would fail
---  Wou should provide thread safe allocation routines for the Z_Stream.
+--  we should provide thread safe allocation routines for the Z_Stream.
 --
---  $Id: mtest.adb,v 1.2 2003/08/12 12:11:05 vagul Exp $
+--  $Id: mtest.adb,v 1.4 2004/07/23 07:49:54 vagul Exp $
 
 with ZLib;
 with Ada.Streams;
@@ -148,6 +148,9 @@ procedure MTest is
 
    pragma Unreferenced (Test);
 
+   Dummy : Character;
+
 begin
-   null;
+   Ada.Text_IO.Get_Immediate (Dummy);
+   Stop := True;
 end MTest;

contrib/ada/read.adb

@@ -6,7 +6,7 @@
 --  Open source license information is in the zlib.ads file.  --
 ----------------------------------------------------------------
 
---  $Id: read.adb,v 1.7 2003/08/12 12:12:35 vagul Exp $
+--  $Id: read.adb,v 1.8 2004/05/31 10:53:40 vagul Exp $
 
 --  Test/demo program for the generic read interface.
 
@@ -68,7 +68,11 @@ procedure Read is
    --  ZLib.Read
    --  reading data from the File_In.
 
-   procedure Read is new ZLib.Read (Read, Read_Buffer, Read_First, Read_Last);
+   procedure Read is new ZLib.Read
+                           (Read,
+                            Read_Buffer,
+                            Rest_First => Read_First,
+                            Rest_Last  => Read_Last);
 
    ----------
    -- Read --
@@ -103,6 +107,7 @@ procedure Read is
       Pack_Size := 0;
       Offset := 1;
       Read_First := Read_Buffer'Last + 1;
+      Read_Last  := Read_Buffer'Last;
    end Reset;
 
 begin

contrib/ada/readme.txt

@@ -1,20 +1,31 @@
-
                         ZLib for Ada thick binding (ZLib.Ada)
-			Release 1.2
+                        Release 1.3
 
 ZLib.Ada is a thick binding interface to the popular ZLib data
 compression library, available at http://www.gzip.org/zlib/.
 It provides Ada-style access to the ZLib C library.
 
 
-	Here are the main changes since ZLib.Ada 1.1:
+        Here are the main changes since ZLib.Ada 1.2:
 
-- The default header type has a name "Default" now. Auto is used only for
+- Attension: ZLib.Read generic routine have a initialization requirement
-  automatic GZip/ZLib header detection.
+  for Read_Last parameter now. It is a bit incompartible with previous version,
+  but extends functionality, we could use new parameters Allow_Read_Some and
+  Flush now.
 
-- Added test for multitasking mtest.adb.
+- Added Is_Open routines to ZLib and ZLib.Streams packages.
 
-- Added GNAT project file zlib.gpr.
+- Add pragma Assert to check Stream_Element is 8 bit.
+
+- Fix extraction to buffer with exact known decompressed size. Error reported by
+  Steve Sangwine.
+
+- Fix definition of ULong (changed to unsigned_long), fix regression on 64 bits
+  computers. Patch provided by Pascal Obry.
+
+- Add Status_Error exception definition.
+
+- Add pragma Assertion that Ada.Streams.Stream_Element size is 8 bit.
 
 
         How to build ZLib.Ada under GNAT
@@ -50,3 +61,5 @@ The routines from the package specifications are commented.
 
 Homepage: http://zlib-ada.sourceforge.net/
 Author: Dmitriy Anisimkov <anisimkov@yahoo.com>
+
+Contributors: Pascal Obry <pascal@obry.org>, Steve Sangwine <sjs@essex.ac.uk>

contrib/ada/zlib-streams.adb

@@ -6,7 +6,7 @@
 --  Open source license information is in the zlib.ads file.  --
 ----------------------------------------------------------------
 
---  $Id: zlib-streams.adb,v 1.9 2003/08/12 13:15:31 vagul Exp $
+--  $Id: zlib-streams.adb,v 1.10 2004/05/31 10:53:40 vagul Exp $
 
 with Ada.Unchecked_Deallocation;
 
@@ -90,6 +90,7 @@ package body ZLib.Streams is
 
          Stream.Buffer     := new Buffer_Subtype;
          Stream.Rest_First := Stream.Buffer'Last + 1;
+         Stream.Rest_Last  := Stream.Buffer'Last;
       end if;
    end Create;
 
@@ -113,6 +114,15 @@ package body ZLib.Streams is
       end loop;
    end Flush;
 
+   -------------
+   -- Is_Open --
+   -------------
+
+   function Is_Open (Stream : Stream_Type) return Boolean is
+   begin
+      return Is_Open (Stream.Reader) or else Is_Open (Stream.Writer);
+   end Is_Open;
+
    ----------
    -- Read --
    ----------

contrib/ada/zlib-streams.ads

@@ -6,7 +6,7 @@
 --  Open source license information is in the zlib.ads file.  --
 ----------------------------------------------------------------
 
---  $Id: zlib-streams.ads,v 1.11 2003/08/12 13:15:31 vagul Exp $
+--  $Id: zlib-streams.ads,v 1.12 2004/05/31 10:53:40 vagul Exp $
 
 package ZLib.Streams is
 
@@ -77,6 +77,8 @@ package ZLib.Streams is
    --  !!! When the Need_Header is False ZLib-Ada is using undocumented
    --  ZLib 1.1.4 functionality to do not create/wait for ZLib headers.
 
+   function Is_Open (Stream : Stream_Type) return Boolean;
+
    procedure Close (Stream : in out Stream_Type);
 
 private

contrib/ada/zlib-thin.adb

@@ -6,12 +6,11 @@
 --  Open source license information is in the zlib.ads file.  --
 ----------------------------------------------------------------
 
---  $Id: zlib-thin.adb,v 1.6 2003/01/21 15:26:37 vagul Exp $
+--  $Id: zlib-thin.adb,v 1.8 2003/12/14 18:27:31 vagul Exp $
 
 package body ZLib.Thin is
 
-   ZLIB_VERSION : constant Chars_Ptr :=
+   ZLIB_VERSION  : constant Chars_Ptr := zlibVersion;
-      Interfaces.C.Strings.New_String ("1.1.4");
 
    Z_Stream_Size : constant Int := Z_Stream'Size / System.Storage_Unit;
 
@@ -37,14 +36,6 @@ package body ZLib.Thin is
    -- Deflate_Init --
    ------------------
 
-   function Deflate_Init
-     (strm  : in Z_Streamp;
-      level : in Int := Z_DEFAULT_COMPRESSION)
-      return  Int is
-   begin
-      return deflateInit (strm, level, ZLIB_VERSION, Z_Stream_Size);
-   end Deflate_Init;
-
    function Deflate_Init
      (strm       : Z_Streamp;
       level      : Int;
@@ -69,16 +60,15 @@ package body ZLib.Thin is
    -- Inflate_Init --
    ------------------
 
-   function Inflate_Init (strm : Z_Streamp) return Int is
-   begin
-      return inflateInit (strm, ZLIB_VERSION, Z_Stream_Size);
-   end Inflate_Init;
-
    function Inflate_Init (strm : Z_Streamp; windowBits : Int) return Int is
    begin
       return inflateInit2 (strm, windowBits, ZLIB_VERSION, Z_Stream_Size);
    end Inflate_Init;
 
+   ------------------------
+   -- Last_Error_Message --
+   ------------------------
+
    function Last_Error_Message (Strm : in Z_Stream) return String is
       use Interfaces.C.Strings;
    begin
@@ -89,45 +79,19 @@ package body ZLib.Thin is
       end if;
    end Last_Error_Message;
 
-   -------------
-   -- Need_In --
-   -------------
-
-   function Need_In (strm : Z_Stream) return Boolean is
-   begin
-      return strm.Avail_In = 0;
-   end Need_In;
-
-   --------------
-   -- Need_Out --
-   --------------
-
-   function Need_Out (strm : Z_Stream) return Boolean is
-   begin
-      return strm.Avail_Out = 0;
-   end Need_Out;
-
    ------------
    -- Set_In --
    ------------
 
    procedure Set_In
      (Strm   : in out Z_Stream;
-      Buffer : in Byte_Access;
+      Buffer : in     Voidp;
       Size   : in     UInt) is
    begin
       Strm.Next_In  := Buffer;
       Strm.Avail_In := Size;
    end Set_In;
 
-   procedure Set_In
-     (Strm   : in out Z_Stream;
-      Buffer : in Voidp;
-      Size   : in UInt) is
-   begin
-      Set_In (Strm, Bytes.To_Pointer (Buffer), Size);
-   end Set_In;
-
    ------------------
    -- Set_Mem_Func --
    ------------------
@@ -149,21 +113,13 @@ package body ZLib.Thin is
 
    procedure Set_Out
      (Strm   : in out Z_Stream;
-      Buffer : in Byte_Access;
+      Buffer : in     Voidp;
       Size   : in     UInt) is
    begin
       Strm.Next_Out  := Buffer;
       Strm.Avail_Out := Size;
    end Set_Out;
 
-   procedure Set_Out
-     (Strm   : in out Z_Stream;
-      Buffer : in Voidp;
-      Size   : in UInt) is
-   begin
-      Set_Out (Strm, Bytes.To_Pointer (Buffer), Size);
-   end Set_Out;
-
    --------------
    -- Total_In --
    --------------

contrib/ada/zlib-thin.ads

@@ -6,10 +6,11 @@
 --  Open source license information is in the zlib.ads file.  --
 ----------------------------------------------------------------
 
---  $Id: zlib-thin.ads,v 1.8 2003/08/12 13:16:51 vagul Exp $
+--  $Id: zlib-thin.ads,v 1.11 2004/07/23 06:33:11 vagul Exp $
 
 with Interfaces.C.Strings;
-with System.Address_To_Access_Conversions;
+
+with System;
 
 private package ZLib.Thin is
 
@@ -36,18 +37,18 @@ private package ZLib.Thin is
                                                 --  zconf.h:216
    type Int is new Interfaces.C.int;
 
-   type ULong is new Interfaces.C.unsigned;     --  32 bits or more
+   type ULong is new Interfaces.C.unsigned_long;     --  32 bits or more
                                                      --  zconf.h:217
    subtype Chars_Ptr is Interfaces.C.Strings.chars_ptr;
 
    type ULong_Access is access ULong;
    type Int_Access is access Int;
+
    subtype Voidp is System.Address;            --  zconf.h:232
 
-   package Bytes is new System.Address_To_Access_Conversions (Byte);
+   subtype Byte_Access is Voidp;
-
-   subtype Byte_Access is Bytes.Object_Pointer;
 
+   Nul : constant Voidp := System.Null_Address;
    --  end from zconf
 
    Z_NO_FLUSH : constant := 8#0000#;   --  zlib.h:125
@@ -251,12 +252,6 @@ private package ZLib.Thin is
       stream_size : Int)
       return        Int;
 
-   function Deflate_Init
-     (strm  : in Z_Streamp;
-      level : in Int := Z_DEFAULT_COMPRESSION)
-      return  Int;
-   pragma Inline (Deflate_Init);
-
    function deflateInit2
      (strm        : Z_Streamp;
       level       : Int;
@@ -284,9 +279,6 @@ private package ZLib.Thin is
       stream_size : Int)
       return        Int;
 
-   function Inflate_Init (strm : Z_Streamp) return Int;
-   pragma Inline (Inflate_Init);
-
    function inflateInit2
      (strm        : in Z_Streamp;
       windowBits  : in Int;
@@ -318,32 +310,12 @@ private package ZLib.Thin is
    --  has dropped to zero. The application must initialize zalloc, zfree and
    --  opaque before calling the init function.
 
-   function Need_In (strm : in Z_Stream) return Boolean;
-   --  return true when we do not need to setup Next_In and Avail_In fields.
-   pragma Inline (Need_In);
-
-   function Need_Out (strm : in Z_Stream) return Boolean;
-   --  return true when we do not need to setup Next_Out and Avail_Out field.
-   pragma Inline (Need_Out);
-
-   procedure Set_In
-     (Strm   : in out Z_Stream;
-      Buffer : in Byte_Access;
-      Size   : in UInt);
-   pragma Inline (Set_In);
-
    procedure Set_In
      (Strm   : in out Z_Stream;
       Buffer : in Voidp;
       Size   : in UInt);
    pragma Inline (Set_In);
 
-   procedure Set_Out
-     (Strm   : in out Z_Stream;
-      Buffer : in Byte_Access;
-      Size   : in UInt);
-   pragma Inline (Set_Out);
-
    procedure Set_Out
      (Strm   : in out Z_Stream;
       Buffer : in Voidp;
@@ -388,19 +360,13 @@ private package ZLib.Thin is
 
    function zlibCompileFlags return ULong;
 
-   function deflatePrime
-     (strm     : Z_Streamp;
-      bits     : Int;
-      value    : Int)
-      return     Int;
-
 private
 
    type Z_Stream is record            -- zlib.h:68
-      Next_In   : Byte_Access;        -- next input byte
+      Next_In   : Voidp      := Nul;  -- next input byte
       Avail_In  : UInt       := 0;    -- number of bytes available at next_in
       Total_In  : ULong      := 0;    -- total nb of input bytes read so far
-      Next_Out  : Byte_Access;        -- next output byte should be put there
+      Next_Out  : Voidp      := Nul;  -- next output byte should be put there
       Avail_Out : UInt       := 0;    -- remaining free space at next_out
       Total_Out : ULong      := 0;    -- total nb of bytes output so far
       msg       : Chars_Ptr;          -- last error message, NULL if no error
@@ -460,14 +426,13 @@ private
    pragma Import (C, inflateSyncPoint, "inflateSyncPoint");
    pragma Import (C, get_crc_table, "get_crc_table");
 
-   --  added in zlib 1.2.1:
+   --  since zlib 1.2.0:
 
    pragma Import (C, inflateCopy, "inflateCopy");
    pragma Import (C, compressBound, "compressBound");
    pragma Import (C, deflateBound, "deflateBound");
    pragma Import (C, gzungetc, "gzungetc");
    pragma Import (C, zlibCompileFlags, "zlibCompileFlags");
-   pragma Import (C, deflatePrime, "deflatePrime");
 
    pragma Import (C, inflateBackInit, "inflateBackInit_");
 

contrib/ada/zlib.adb

@@ -1,12 +1,12 @@
 ----------------------------------------------------------------
 --  ZLib for Ada thick binding.                               --
 --                                                            --
---  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
+--  Copyright (C) 2002-2004 Dmitriy Anisimkov                 --
 --                                                            --
 --  Open source license information is in the zlib.ads file.  --
 ----------------------------------------------------------------
 
---  $Id: zlib.adb,v 1.19 2003/07/13 16:02:19 vagul Exp $
+--  $Id: zlib.adb,v 1.31 2004/09/06 06:53:19 vagul Exp $
 
 with Ada.Exceptions;
 with Ada.Unchecked_Conversion;
@@ -34,7 +34,7 @@ package body ZLib is
        VERSION_ERROR);
 
    type Flate_Step_Function is access
-     function (Strm : Thin.Z_Streamp; flush : Thin.Int) return Thin.Int;
+     function (Strm : in Thin.Z_Streamp; Flush : in Thin.Int) return Thin.Int;
    pragma Convention (C, Flate_Step_Function);
 
    type Flate_End_Function is access
@@ -82,13 +82,13 @@ package body ZLib is
    Flush_Finish : constant array (Boolean) of Flush_Mode
      := (True => Finish, False => No_Flush);
 
-   procedure Raise_Error (Stream : Z_Stream);
+   procedure Raise_Error (Stream : in Z_Stream);
    pragma Inline (Raise_Error);
 
-   procedure Raise_Error (Message : String);
+   procedure Raise_Error (Message : in String);
    pragma Inline (Raise_Error);
 
-   procedure Check_Error (Stream : Z_Stream; Code : Thin.Int);
+   procedure Check_Error (Stream : in Z_Stream; Code : in Thin.Int);
 
    procedure Free is new Ada.Unchecked_Deallocation
       (Z_Stream, Z_Stream_Access);
@@ -118,7 +118,7 @@ package body ZLib is
    -- Check_Error --
    -----------------
 
-   procedure Check_Error (Stream : Z_Stream; Code : Thin.Int) is
+   procedure Check_Error (Stream : in Z_Stream; Code : in Thin.Int) is
       use type Thin.Int;
    begin
       if Code /= Thin.Z_OK then
@@ -138,10 +138,11 @@ package body ZLib is
    is
       Code : Thin.Int;
    begin
-      Code := Flate (Filter.Compression).Done
+      if not Ignore_Error and then not Is_Open (Filter) then
-          (To_Thin_Access (Filter.Strm));
+         raise Status_Error;
+      end if;
 
-      Filter.Opened := False;
+      Code := Flate (Filter.Compression).Done (To_Thin_Access (Filter.Strm));
 
       if Ignore_Error or else Code = Thin.Z_OK then
          Free (Filter.Strm);
@@ -170,9 +171,8 @@ package body ZLib is
    is
       use Thin;
    begin
-      return Unsigned_32 (crc32
+      return Unsigned_32 (crc32 (ULong (CRC),
-        (ULong (CRC),
+                                 Data'Address,
-         Bytes.To_Pointer (Data'Address),
                                  Data'Length));
    end CRC32;
 
@@ -192,13 +192,17 @@ package body ZLib is
       Level        : in     Compression_Level  := Default_Compression;
       Strategy     : in     Strategy_Type      := Default_Strategy;
       Method       : in     Compression_Method := Deflated;
-      Window_Bits  : in     Window_Bits_Type   := 15;
+      Window_Bits  : in     Window_Bits_Type   := Default_Window_Bits;
-      Memory_Level : in     Memory_Level_Type  := 8;
+      Memory_Level : in     Memory_Level_Type  := Default_Memory_Level;
       Header       : in     Header_Type        := Default)
    is
       use type Thin.Int;
       Win_Bits : Thin.Int := Thin.Int (Window_Bits);
    begin
+      if Is_Open (Filter) then
+         raise Status_Error;
+      end if;
+
       --  We allow ZLib to make header only in case of default header type.
       --  Otherwise we would either do header by ourselfs, or do not do
       --  header at all.
@@ -219,7 +223,6 @@ package body ZLib is
       Filter.Strm        := new Z_Stream;
       Filter.Compression := True;
       Filter.Stream_End  := False;
-      Filter.Opened      := True;
       Filter.Header      := Header;
 
       if Thin.Deflate_Init
@@ -256,8 +259,8 @@ package body ZLib is
 
    procedure Generic_Translate
      (Filter          : in out ZLib.Filter_Type;
-      In_Buffer_Size  : Integer := Default_Buffer_Size;
+      In_Buffer_Size  : in     Integer := Default_Buffer_Size;
-      Out_Buffer_Size : Integer := Default_Buffer_Size)
+      Out_Buffer_Size : in     Integer := Default_Buffer_Size)
    is
       In_Buffer  : Stream_Element_Array
                      (1 .. Stream_Element_Offset (In_Buffer_Size));
@@ -275,18 +278,21 @@ package body ZLib is
 
          loop
             Translate
-              (Filter,
+              (Filter   => Filter,
-               In_Buffer (In_First .. Last),
+               In_Data  => In_Buffer (In_First .. Last),
-               In_Last,
+               In_Last  => In_Last,
-               Out_Buffer,
+               Out_Data => Out_Buffer,
-               Out_Last,
+               Out_Last => Out_Last,
-               Flush_Finish (Last < In_Buffer'First));
+               Flush    => Flush_Finish (Last < In_Buffer'First));
 
+            if Out_Buffer'First <= Out_Last then
                Data_Out (Out_Buffer (Out_Buffer'First .. Out_Last));
+            end if;
 
             exit Main when Stream_End (Filter);
 
             --  The end of in buffer.
+
             exit when In_Last = Last;
 
             In_First := In_Last + 1;
@@ -301,7 +307,7 @@ package body ZLib is
 
    procedure Inflate_Init
      (Filter      : in out Filter_Type;
-      Window_Bits : in     Window_Bits_Type := 15;
+      Window_Bits : in     Window_Bits_Type := Default_Window_Bits;
       Header      : in     Header_Type      := Default)
    is
       use type Thin.Int;
@@ -320,6 +326,10 @@ package body ZLib is
       end Check_Version;
 
    begin
+      if Is_Open (Filter) then
+         raise Status_Error;
+      end if;
+
       case Header is
          when None =>
             Check_Version;
@@ -347,7 +357,6 @@ package body ZLib is
       Filter.Strm        := new Z_Stream;
       Filter.Compression := False;
       Filter.Stream_End  := False;
-      Filter.Opened      := True;
       Filter.Header      := Header;
 
       if Thin.Inflate_Init
@@ -357,16 +366,25 @@ package body ZLib is
       end if;
    end Inflate_Init;
 
+   -------------
+   -- Is_Open --
+   -------------
+
+   function Is_Open (Filter : in Filter_Type) return Boolean is
+   begin
+      return Filter.Strm /= null;
+   end Is_Open;
+
    -----------------
    -- Raise_Error --
    -----------------
 
-   procedure Raise_Error (Message : String) is
+   procedure Raise_Error (Message : in String) is
    begin
       Ada.Exceptions.Raise_Exception (ZLib_Error'Identity, Message);
    end Raise_Error;
 
-   procedure Raise_Error (Stream : Z_Stream) is
+   procedure Raise_Error (Stream : in Z_Stream) is
    begin
       Raise_Error (Last_Error_Message (Stream));
    end Raise_Error;
@@ -378,21 +396,29 @@ package body ZLib is
    procedure Read
      (Filter : in out Filter_Type;
       Item   :    out Ada.Streams.Stream_Element_Array;
-      Last   :    out Ada.Streams.Stream_Element_Offset)
+      Last   :    out Ada.Streams.Stream_Element_Offset;
+      Flush  : in     Flush_Mode := No_Flush)
    is
       In_Last    : Stream_Element_Offset;
       Item_First : Ada.Streams.Stream_Element_Offset := Item'First;
+      V_Flush    : Flush_Mode := Flush;
 
    begin
       pragma Assert (Rest_First in Buffer'First .. Buffer'Last + 1);
+      pragma Assert (Rest_Last in Buffer'First - 1 .. Buffer'Last);
 
       loop
-         if Rest_First > Buffer'Last then
+         if Rest_Last = Buffer'First - 1 then
+            V_Flush := Finish;
+
+         elsif Rest_First > Rest_Last then
             Read (Buffer, Rest_Last);
             Rest_First := Buffer'First;
-         end if;
 
-         pragma Assert (Rest_Last in Buffer'First - 1 .. Buffer'Last);
+            if Rest_Last < Buffer'First then
+               V_Flush := Finish;
+            end if;
+         end if;
 
          Translate
            (Filter   => Filter,
@@ -400,11 +426,13 @@ package body ZLib is
             In_Last  => In_Last,
             Out_Data => Item (Item_First .. Item'Last),
             Out_Last => Last,
-            Flush    => Flush_Finish (Rest_Last < Rest_First));
+            Flush    => V_Flush);
 
          Rest_First := In_Last + 1;
 
-         exit when Last = Item'Last or else Stream_End (Filter);
+         exit when Stream_End (Filter)
+           or else Last = Item'Last
+           or else (Last >= Item'First and then Allow_Read_Some);
 
          Item_First := Last + 1;
       end loop;
@@ -489,11 +517,11 @@ package body ZLib is
       Code : Thin.Int;
 
    begin
-      if Filter.Opened = False then
+      if not Is_Open (Filter) then
-         raise ZLib_Error;
+         raise Status_Error;
       end if;
 
-      if Out_Data'Length = 0 then
+      if Out_Data'Length = 0 and then In_Data'Length = 0 then
          raise Constraint_Error;
       end if;
 
@@ -514,7 +542,6 @@ package body ZLib is
          - Stream_Element_Offset (Avail_In (Filter.Strm.all));
       Out_Last := Out_Data'Last
          - Stream_Element_Offset (Avail_Out (Filter.Strm.all));
-
    end Translate_Auto;
 
    --------------------
@@ -604,7 +631,6 @@ package body ZLib is
             Flush    => Flush);
 
          CRC32 (Filter.CRC, In_Data (In_Data'First .. In_Last));
-
       end if;
 
       if Filter.Stream_End and then Out_Last <= Out_Data'Last then
@@ -642,10 +668,11 @@ package body ZLib is
    procedure Write
      (Filter : in out Filter_Type;
       Item   : in     Ada.Streams.Stream_Element_Array;
-      Flush  : in     Flush_Mode)
+      Flush  : in     Flush_Mode := No_Flush)
    is
       Buffer   : Stream_Element_Array (1 .. Buffer_Size);
-      In_Last, Out_Last : Stream_Element_Offset;
+      In_Last  : Stream_Element_Offset;
+      Out_Last : Stream_Element_Offset;
       In_First : Stream_Element_Offset := Item'First;
    begin
       if Item'Length = 0 and Flush = No_Flush then

contrib/ada/zlib.ads

@@ -1,7 +1,7 @@
 ------------------------------------------------------------------------------
 --                      ZLib for Ada thick binding.                         --
 --                                                                          --
---              Copyright (C) 2002-2003 Dmitriy Anisimkov                   --
+--              Copyright (C) 2002-2004 Dmitriy Anisimkov                   --
 --                                                                          --
 --  This library is free software; you can redistribute it and/or modify    --
 --  it under the terms of the GNU General Public License as published by    --
@@ -25,7 +25,7 @@
 --  covered by the  GNU Public License.                                     --
 ------------------------------------------------------------------------------
 
---  $Id: zlib.ads,v 1.17 2003/08/12 13:19:07 vagul Exp $
+--  $Id: zlib.ads,v 1.26 2004/09/06 06:53:19 vagul Exp $
 
 with Ada.Streams;
 
@@ -34,6 +34,7 @@ with Interfaces;
 package ZLib is
 
    ZLib_Error   : exception;
+   Status_Error : exception;
 
    type Compression_Level is new Integer range -1 .. 9;
 
@@ -55,12 +56,15 @@ package ZLib is
 
    subtype Count is Ada.Streams.Stream_Element_Count;
 
+   Default_Memory_Level : constant Memory_Level_Type := 8;
+   Default_Window_Bits  : constant Window_Bits_Type  := 15;
+
    ----------------------------------
    -- Compression method constants --
    ----------------------------------
 
    Deflated : constant Compression_Method;
-   --  Only one method allowed in this ZLib version.
+   --  Only one method allowed in this ZLib version
 
    ---------------------------------
    -- Compression level constants --
@@ -79,21 +83,29 @@ package ZLib is
    --  Regular way for compression, no flush
 
    Partial_Flush : constant Flush_Mode;
-   --  will be removed, use Z_SYNC_FLUSH instead
+   --  Will be removed, use Z_SYNC_FLUSH instead
 
    Sync_Flush    : constant Flush_Mode;
-   --  all pending output is flushed to the output buffer and the output
+   --  All pending output is flushed to the output buffer and the output
    --  is aligned on a byte boundary, so that the decompressor can get all
    --  input data available so far. (In particular avail_in is zero after the
    --  call if enough output space has been provided  before the call.)
    --  Flushing may degrade compression for some compression algorithms and so
    --  it should be used only when necessary.
 
+   Block_Flush   : constant Flush_Mode;
+   --  Z_BLOCK requests that inflate() stop
+   --  if and when it get to the next deflate block boundary. When decoding the
+   --  zlib or gzip format, this will cause inflate() to return immediately
+   --  after the header and before the first block. When doing a raw inflate,
+   --  inflate() will go ahead and process the first block, and will return
+   --  when it gets to the end of that block, or when it runs out of data.
+
    Full_Flush    : constant Flush_Mode;
-   --  all output is flushed as with SYNC_FLUSH, and the compression state
+   --  All output is flushed as with SYNC_FLUSH, and the compression state
    --  is reset so that decompression can restart from this point if previous
    --  compressed data has been damaged or if random access is desired. Using
-   --  FULL_FLUSH too often can seriously degrade the compression.
+   --  Full_Flush too often can seriously degrade the compression.
 
    Finish        : constant Flush_Mode;
    --  Just for tell the compressor that input data is complete.
@@ -111,7 +123,7 @@ package ZLib is
 
    Default_Buffer_Size : constant := 4096;
 
-   type Filter_Type is limited private;
+   type Filter_Type is tagged limited private;
    --  The filter is for compression and for decompression.
    --  The usage of the type is depend of its initialization.
 
@@ -124,8 +136,8 @@ package ZLib is
       Level        : in     Compression_Level  := Default_Compression;
       Strategy     : in     Strategy_Type      := Default_Strategy;
       Method       : in     Compression_Method := Deflated;
-      Window_Bits  : in     Window_Bits_Type   := 15;
+      Window_Bits  : in     Window_Bits_Type   := Default_Window_Bits;
-      Memory_Level : in     Memory_Level_Type  := 8;
+      Memory_Level : in     Memory_Level_Type  := Default_Memory_Level;
       Header       : in     Header_Type        := Default);
    --  Compressor initialization.
    --  When Header parameter is Auto or Default, then default zlib header
@@ -136,7 +148,7 @@ package ZLib is
 
    procedure Inflate_Init
      (Filter      : in out Filter_Type;
-      Window_Bits : in     Window_Bits_Type := 15;
+      Window_Bits : in     Window_Bits_Type := Default_Window_Bits;
       Header      : in     Header_Type      := Default);
    --  Decompressor initialization.
    --  Default header type mean that ZLib default header is expecting in the
@@ -146,10 +158,14 @@ package ZLib is
    --  input compressed stream.
    --  Auto header type mean that header type (GZip or Native) would be
    --  detected automatically in the input stream.
-   --  Note that header types parameter values None, GZip and Auto is
+   --  Note that header types parameter values None, GZip and Auto are
-   --  supporting for inflate routine only in ZLib versions 1.2.0.2 and later.
+   --  supported for inflate routine only in ZLib versions 1.2.0.2 and later.
    --  Deflate_Init is supporting all header types.
 
+   function Is_Open (Filter : in Filter_Type) return Boolean;
+   pragma Inline (Is_Open);
+   --  Is the filter opened for compression or decompression.
+
    procedure Close
      (Filter       : in out Filter_Type;
       Ignore_Error : in     Boolean := False);
@@ -167,31 +183,31 @@ package ZLib is
      (Filter          : in out Filter_Type;
       In_Buffer_Size  : in     Integer := Default_Buffer_Size;
       Out_Buffer_Size : in     Integer := Default_Buffer_Size);
-   --  Compressing/decompressing data arrived from Data_In routine
+   --  Compress/decompress data fetch from Data_In routine and pass the result
    --  to the Data_Out routine. User should provide Data_In and Data_Out
    --  for compression/decompression data flow.
-   --  Compression or decompression depend on initialization of Filter.
+   --  Compression or decompression depend on Filter initialization.
 
    function Total_In (Filter : in Filter_Type) return Count;
    pragma Inline (Total_In);
-   --  Return total number of input bytes read so far.
+   --  Returns total number of input bytes read so far
 
    function Total_Out (Filter : in Filter_Type) return Count;
    pragma Inline (Total_Out);
-   --  Return total number of bytes output so far.
+   --  Returns total number of bytes output so far
 
    function CRC32
      (CRC    : in Unsigned_32;
       Data   : in Ada.Streams.Stream_Element_Array)
       return Unsigned_32;
    pragma Inline (CRC32);
-   --  Calculate CRC32, it could be necessary for make gzip format.
+   --  Compute CRC32, it could be necessary for make gzip format
 
    procedure CRC32
      (CRC  : in out Unsigned_32;
       Data : in     Ada.Streams.Stream_Element_Array);
    pragma Inline (CRC32);
-   --  Calculate CRC32, it could be necessary for make gzip format.
+   --  Compute CRC32, it could be necessary for make gzip format
 
    -------------------------------------------------
    --  Below is more complex low level routines.  --
@@ -204,15 +220,11 @@ package ZLib is
       Out_Data  :    out Ada.Streams.Stream_Element_Array;
       Out_Last  :    out Ada.Streams.Stream_Element_Offset;
       Flush     : in     Flush_Mode);
-   --  Compressing/decompressing the datas from In_Data buffer to the
+   --  Compress/decompress the In_Data buffer and place the result into
-   --  Out_Data buffer.
+   --  Out_Data. In_Last is the index of last element from In_Data accepted by
-   --  In_Data is incoming data portion,
+   --  the Filter. Out_Last is the last element of the received data from
-   --  In_Last is the index of last element from In_Data accepted by the
+   --  Filter. To tell the filter that incoming data are complete put the
-   --  Filter.
+   --  Flush parameter to Finish.
-   --  Out_Data is the buffer for output data from the filter.
-   --  Out_Last is the last element of the received data from Filter.
-   --  To tell the filter that incoming data is complete put the
-   --  Flush parameter to FINISH.
 
    function Stream_End (Filter : in Filter_Type) return Boolean;
    pragma Inline (Stream_End);
@@ -239,10 +251,9 @@ package ZLib is
    procedure Write
      (Filter  : in out Filter_Type;
       Item    : in     Ada.Streams.Stream_Element_Array;
-      Flush   : in     Flush_Mode);
+      Flush   : in     Flush_Mode := No_Flush);
-   --  Compressing/Decompressing data from Item to the
+   --  Compress/Decompress data from Item to the generic parameter procedure
-   --  generic parameter procedure Write.
+   --  Write. Output buffer size could be set in Buffer_Size generic parameter.
-   --  Output buffer size could be set in Buffer_Size generic parameter.
 
    generic
       with procedure Read
@@ -257,33 +268,41 @@ package ZLib is
 
       Rest_First, Rest_Last : in out Ada.Streams.Stream_Element_Offset;
       --  Rest_First have to be initialized to Buffer'Last + 1
+      --  Rest_Last have to be initialized to Buffer'Last
       --  before usage.
 
+      Allow_Read_Some : in Boolean := False;
+      --  Is it allowed to return Last < Item'Last before end of data.
+
    procedure Read
      (Filter : in out Filter_Type;
       Item   :    out Ada.Streams.Stream_Element_Array;
-      Last   :    out Ada.Streams.Stream_Element_Offset);
+      Last   :    out Ada.Streams.Stream_Element_Offset;
-   --  Compressing/Decompressing data from generic parameter
+      Flush  : in     Flush_Mode := No_Flush);
-   --  procedure Read to the Item.
+   --  Compress/Decompress data from generic parameter procedure Read to the
-   --  User should provide Buffer for the operation
+   --  Item. User should provide Buffer and initialized Rest_First, Rest_Last
-   --  and Rest_First variable first time initialized to the Buffer'Last + 1.
+   --  indicators. If Allow_Read_Some is True, Read routines could return
+   --  Last < Item'Last only at end of stream.
 
 private
 
    use Ada.Streams;
 
-   type Flush_Mode is new Integer range 0 .. 4;
+   pragma Assert (Ada.Streams.Stream_Element'Size    =    8);
+   pragma Assert (Ada.Streams.Stream_Element'Modulus = 2**8);
+
+   type Flush_Mode is new Integer range 0 .. 5;
 
    type Compression_Method is new Integer range 8 .. 8;
 
    type Strategy_Type is new Integer range 0 .. 3;
 
    No_Flush      : constant Flush_Mode := 0;
+   Partial_Flush : constant Flush_Mode := 1;
    Sync_Flush    : constant Flush_Mode := 2;
    Full_Flush    : constant Flush_Mode := 3;
    Finish        : constant Flush_Mode := 4;
-   Partial_Flush : constant Flush_Mode := 1;
+   Block_Flush   : constant Flush_Mode := 5;
-   --  will be removed, use Z_SYNC_FLUSH instead
 
    Filtered         : constant Strategy_Type := 1;
    Huffman_Only     : constant Strategy_Type := 2;
@@ -296,7 +315,7 @@ private
 
    type Z_Stream_Access is access all Z_Stream;
 
-   type Filter_Type is record
+   type Filter_Type is tagged limited record
       Strm        : Z_Stream_Access;
       Compression : Boolean;
       Stream_End  : Boolean;
@@ -304,8 +323,6 @@ private
       CRC         : Unsigned_32;
       Offset      : Stream_Element_Offset;
       --  Offset for gzip header/footer output.
-
-      Opened      : Boolean := False;
    end record;
 
 end ZLib;

contrib/ada/zlib.gpr

@@ -3,10 +3,10 @@ project Zlib is
    for Languages use ("Ada");
    for Source_Dirs use (".");
    for Object_Dir use ".";
-   for Main use ("test.adb", "mtest.adb", "read.adb");
+   for Main use ("test.adb", "mtest.adb", "read.adb", "buffer_demo");
 
    package Compiler is
-      for Default_Switches ("ada") use ("-gnatwbcfilopru", "-gnatVcdfimorst", "-gnatyabcefhiklmnoprst");
+      for Default_Switches ("ada") use ("-gnatwcfilopru", "-gnatVcdfimorst", "-gnatyabcefhiklmnoprst");
    end Compiler;
 
    package Linker is
@@ -18,4 +18,3 @@ project Zlib is
    end Builder;
 
 end Zlib;
-

contrib/asm586/match.S

@@ -45,19 +45,29 @@
  * program to crash horribly, without so much as a warning at
  * compile time. Sigh.)
  */
-#define	dsWSize			36
+
-#define	dsWMask			44
+/* All the +zlib1222add offsets are due to the addition of fields
-#define	dsWindow		48
+ *  in zlib in the deflate_state structure since the asm code was first written
-#define	dsPrev			56
+ * (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
-#define	dsMatchLen		88
+ * (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
-#define	dsPrevMatch		92
+ * if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
-#define	dsStrStart		100
+ */
-#define	dsMatchStart		104
+
-#define	dsLookahead		108
+#define zlib1222add		(8)
-#define	dsPrevLen		112
+
-#define	dsMaxChainLen		116
+#define	dsWSize			(36+zlib1222add)
-#define	dsGoodMatch		132
+#define	dsWMask			(44+zlib1222add)
-#define	dsNiceMatch		136
+#define	dsWindow		(48+zlib1222add)
+#define	dsPrev			(56+zlib1222add)
+#define	dsMatchLen		(88+zlib1222add)
+#define	dsPrevMatch		(92+zlib1222add)
+#define	dsStrStart		(100+zlib1222add)
+#define	dsMatchStart		(104+zlib1222add)
+#define	dsLookahead		(108+zlib1222add)
+#define	dsPrevLen		(112+zlib1222add)
+#define	dsMaxChainLen		(116+zlib1222add)
+#define	dsGoodMatch		(132+zlib1222add)
+#define	dsNiceMatch		(136+zlib1222add)
 
 
 .file "match.S"

contrib/asm686/match.S

@@ -38,26 +38,28 @@
 #define	deflatestate		56	/* the function arguments	*/
 #define	curmatch		60
 
-/* Offsets for fields in the deflate_state structure. These numbers
+/* All the +zlib1222add offsets are due to the addition of fields
- * are calculated from the definition of deflate_state, with the
+ *  in zlib in the deflate_state structure since the asm code was first written
- * assumption that the compiler will dword-align the fields. (Thus,
+ * (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
- * changing the definition of deflate_state could easily cause this
+ * (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
- * program to crash horribly, without so much as a warning at
+ * if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
- * compile time. Sigh.)
  */
-#define	dsWSize			36
+
-#define	dsWMask			44
+#define zlib1222add		(8)
-#define	dsWindow		48
+
-#define	dsPrev			56
+#define	dsWSize			(36+zlib1222add)
-#define	dsMatchLen		88
+#define	dsWMask			(44+zlib1222add)
-#define	dsPrevMatch		92
+#define	dsWindow		(48+zlib1222add)
-#define	dsStrStart		100
+#define	dsPrev			(56+zlib1222add)
-#define	dsMatchStart		104
+#define	dsMatchLen		(88+zlib1222add)
-#define	dsLookahead		108
+#define	dsPrevMatch		(92+zlib1222add)
-#define	dsPrevLen		112
+#define	dsStrStart		(100+zlib1222add)
-#define	dsMaxChainLen		116
+#define	dsMatchStart		(104+zlib1222add)
-#define	dsGoodMatch		132
+#define	dsLookahead		(108+zlib1222add)
-#define	dsNiceMatch		136
+#define	dsPrevLen		(112+zlib1222add)
+#define	dsMaxChainLen		(116+zlib1222add)
+#define	dsGoodMatch		(132+zlib1222add)
+#define	dsNiceMatch		(136+zlib1222add)
 
 
 .file "match.S"

contrib/delphi/ZLib.pas

@@ -152,7 +152,7 @@ procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
   const OutBuf: Pointer; BufSize: Integer);
 
 const
-  zlib_version = '1.2.1';
+  zlib_version = '1.2.2';
 
 type
   EZlibError = class(Exception);
@@ -344,7 +344,7 @@ begin
     strm.avail_out := OutBytes;
     DCheck(inflateInit_(strm, zlib_version, sizeof(strm)));
     try
-      while DCheck(inflate(strm, Z_FINISH)) <> Z_STREAM_END do
+      while DCheck(inflate(strm, Z_NO_FLUSH)) <> Z_STREAM_END do
       begin
         P := OutBuf;
         Inc(OutBytes, BufInc);

contrib/dotzlib/DotZLib.build

@@ -0,0 +1,33 @@
+<?xml version="1.0" encoding="utf-8" ?>
+<project name="DotZLib" default="build" basedir="./DotZLib">
+	<description>A .Net wrapper library around ZLib1.dll</description>
+
+	<property name="nunit.location" value="c:/program files/NUnit V2.1/bin" />
+	<property name="build.root" value="bin" />
+	
+	<property name="debug" value="true" />
+	<property name="nunit" value="true" />
+
+	<property name="build.folder" value="${build.root}/debug/" if="${debug}" />
+	<property name="build.folder" value="${build.root}/release/" unless="${debug}" />
+
+	<target name="clean" description="Remove all generated files">
+		<delete dir="${build.root}" failonerror="false" />
+	</target>
+
+	<target name="build" description="compiles the source code">
+		
+		<mkdir dir="${build.folder}" />
+		<csc target="library" output="${build.folder}DotZLib.dll" debug="${debug}">
+			<references basedir="${nunit.location}">
+				<includes if="${nunit}" name="nunit.framework.dll" />
+			</references>
+			<sources>
+				<includes name="*.cs" />
+				<excludes name="UnitTests.cs" unless="${nunit}" />
+			</sources>
+			<arg value="/d:nunit" if="${nunit}" />
+		</csc>
+	</target>
+
+</project>

contrib/dotzlib/DotZLib.sln

@@ -0,0 +1,21 @@
+Microsoft Visual Studio Solution File, Format Version 8.00
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "DotZLib", "DotZLib\DotZLib.csproj", "{BB1EE0B1-1808-46CB-B786-949D91117FC5}"
+	ProjectSection(ProjectDependencies) = postProject
+	EndProjectSection
+EndProject
+Global
+	GlobalSection(SolutionConfiguration) = preSolution
+		Debug = Debug
+		Release = Release
+	EndGlobalSection
+	GlobalSection(ProjectConfiguration) = postSolution
+		{BB1EE0B1-1808-46CB-B786-949D91117FC5}.Debug.ActiveCfg = Debug|.NET
+		{BB1EE0B1-1808-46CB-B786-949D91117FC5}.Debug.Build.0 = Debug|.NET
+		{BB1EE0B1-1808-46CB-B786-949D91117FC5}.Release.ActiveCfg = Release|.NET
+		{BB1EE0B1-1808-46CB-B786-949D91117FC5}.Release.Build.0 = Release|.NET
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+	EndGlobalSection
+	GlobalSection(ExtensibilityAddIns) = postSolution
+	EndGlobalSection
+EndGlobal

contrib/dotzlib/DotZLib/AssemblyInfo.cs

@@ -0,0 +1,58 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("DotZLib")]
+[assembly: AssemblyDescription(".Net bindings for ZLib compression dll 1.2.x")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("Henrik Ravn")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("(c) 2004 by Henrik Ravn")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.0.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+[assembly: AssemblyKeyFile("")]
+[assembly: AssemblyKeyName("")]

contrib/dotzlib/DotZLib/ChecksumImpl.cs

@@ -0,0 +1,202 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Runtime.InteropServices;
+using System.Text;
+
+
+namespace DotZLib
+{
+    #region ChecksumGeneratorBase
+    /// <summary>
+    /// Implements the common functionality needed for all <see cref="ChecksumGenerator"/>s
+    /// </summary>
+    /// <example></example>
+    public abstract class ChecksumGeneratorBase : ChecksumGenerator
+    {
+        /// <summary>
+        /// The value of the current checksum
+        /// </summary>
+        protected uint _current;
+
+        /// <summary>
+        /// Initializes a new instance of the checksum generator base - the current checksum is 
+        /// set to zero
+        /// </summary>
+        public ChecksumGeneratorBase()
+        {
+            _current = 0;
+        }
+
+        /// <summary>
+        /// Initializes a new instance of the checksum generator basewith a specified value
+        /// </summary>
+        /// <param name="initialValue">The value to set the current checksum to</param>
+        public ChecksumGeneratorBase(uint initialValue)
+        {
+            _current = initialValue;
+        }
+
+        /// <summary>
+        /// Resets the current checksum to zero
+        /// </summary>
+        public void Reset() { _current = 0; }
+
+        /// <summary>
+        /// Gets the current checksum value
+        /// </summary>
+        public uint Value { get { return _current; } }
+
+        /// <summary>
+        /// Updates the current checksum with part of an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        /// <param name="offset">Where in <c>data</c> to start updating</param>
+        /// <param name="count">The number of bytes from <c>data</c> to use</param>
+        /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+        /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>
+        /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+        /// <remarks>All the other <c>Update</c> methods are implmeneted in terms of this one. 
+        /// This is therefore the only method a derived class has to implement</remarks>
+        public abstract void Update(byte[] data, int offset, int count);
+
+        /// <summary>
+        /// Updates the current checksum with an array of bytes.
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        public void Update(byte[] data)
+        {
+            Update(data, 0, data.Length);
+        }
+
+        /// <summary>
+        /// Updates the current checksum with the data from a string
+        /// </summary>
+        /// <param name="data">The string to update the checksum with</param>
+        /// <remarks>The characters in the string are converted by the UTF-8 encoding</remarks>
+        public void Update(string data)
+        {
+			Update(Encoding.UTF8.GetBytes(data));
+        }
+
+        /// <summary>
+        /// Updates the current checksum with the data from a string, using a specific encoding
+        /// </summary>
+        /// <param name="data">The string to update the checksum with</param>
+        /// <param name="encoding">The encoding to use</param>
+        public void Update(string data, Encoding encoding)
+        {
+            Update(encoding.GetBytes(data));
+        }
+
+    }
+    #endregion
+
+    #region CRC32
+    /// <summary>
+    /// Implements a CRC32 checksum generator
+    /// </summary>
+    public sealed class CRC32Checksum : ChecksumGeneratorBase    
+    {
+        #region DLL imports
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern uint crc32(uint crc, int data, uint length);
+
+        #endregion
+
+        /// <summary>
+        /// Initializes a new instance of the CRC32 checksum generator
+        /// </summary>
+        public CRC32Checksum() : base() {}
+
+        /// <summary>
+        /// Initializes a new instance of the CRC32 checksum generator with a specified value
+        /// </summary>
+        /// <param name="initialValue">The value to set the current checksum to</param>
+        public CRC32Checksum(uint initialValue) : base(initialValue) {}
+
+        /// <summary>
+        /// Updates the current checksum with part of an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        /// <param name="offset">Where in <c>data</c> to start updating</param>
+        /// <param name="count">The number of bytes from <c>data</c> to use</param>
+        /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+        /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>
+        /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+        public override void Update(byte[] data, int offset, int count)
+        {
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > data.Length) throw new ArgumentException();
+            GCHandle hData = GCHandle.Alloc(data, GCHandleType.Pinned);
+            try
+            {
+                _current = crc32(_current, hData.AddrOfPinnedObject().ToInt32()+offset, (uint)count);
+            }
+            finally
+            {
+                hData.Free();
+            }
+        }
+
+    }
+    #endregion
+
+    #region Adler
+    /// <summary>
+    /// Implements a checksum generator that computes the Adler checksum on data
+    /// </summary>
+    public sealed class AdlerChecksum : ChecksumGeneratorBase    
+    {
+        #region DLL imports
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern uint adler32(uint adler, int data, uint length);
+
+        #endregion
+
+        /// <summary>
+        /// Initializes a new instance of the Adler checksum generator
+        /// </summary>
+        public AdlerChecksum() : base() {}
+
+        /// <summary>
+        /// Initializes a new instance of the Adler checksum generator with a specified value
+        /// </summary>
+        /// <param name="initialValue">The value to set the current checksum to</param>
+        public AdlerChecksum(uint initialValue) : base(initialValue) {}
+
+        /// <summary>
+        /// Updates the current checksum with part of an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        /// <param name="offset">Where in <c>data</c> to start updating</param>
+        /// <param name="count">The number of bytes from <c>data</c> to use</param>
+        /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+        /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>
+        /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+        public override void Update(byte[] data, int offset, int count)
+        {
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > data.Length) throw new ArgumentException();
+            GCHandle hData = GCHandle.Alloc(data, GCHandleType.Pinned);
+            try
+            {
+                _current = adler32(_current, hData.AddrOfPinnedObject().ToInt32()+offset, (uint)count);
+            }
+            finally
+            {
+                hData.Free();
+            }
+        }
+
+    }
+    #endregion
+
+}

contrib/dotzlib/DotZLib/CircularBuffer.cs

@@ -0,0 +1,83 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Diagnostics;
+
+namespace DotZLib
+{
+
+	/// <summary>
+	/// This class implements a circular buffer
+	/// </summary>
+	internal class CircularBuffer
+	{
+        #region Private data
+        private int _capacity;
+        private int _head;
+        private int _tail;
+        private int _size;
+        private byte[] _buffer;
+        #endregion
+
+        public CircularBuffer(int capacity)
+        {    
+            Debug.Assert( capacity > 0 );
+            _buffer = new byte[capacity];
+            _capacity = capacity;
+            _head = 0;
+            _tail = 0;
+            _size = 0;
+        }
+
+        public int Size { get { return _size; } }
+
+        public int Put(byte[] source, int offset, int count)
+        {
+            Debug.Assert( count > 0 );
+            int trueCount = Math.Min(count, _capacity - Size);
+            for (int i = 0; i < trueCount; ++i)
+                _buffer[(_tail+i) % _capacity] = source[offset+i];
+            _tail += trueCount;
+            _tail %= _capacity;
+            _size += trueCount;
+            return trueCount;
+        }
+
+        public bool Put(byte b)
+        {
+            if (Size == _capacity) // no room
+                return false;
+            _buffer[_tail++] = b;
+            _tail %= _capacity;
+            ++_size;
+            return true;
+        }
+
+        public int Get(byte[] destination, int offset, int count)
+        {
+            int trueCount = Math.Min(count,Size);
+            for (int i = 0; i < trueCount; ++i)
+                destination[offset + i] = _buffer[(_head+i) % _capacity];
+            _head += trueCount;
+            _head %= _capacity;
+            _size -= trueCount;
+            return trueCount;
+        }
+
+        public int Get()
+        {
+            if (Size == 0)
+                return -1;
+
+            int result = (int)_buffer[_head++ % _capacity];
+            --_size;
+            return result;
+        }
+
+    }
+}

contrib/dotzlib/DotZLib/CodecBase.cs

@@ -0,0 +1,198 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+	/// <summary>
+	/// Implements the common functionality needed for all <see cref="Codec"/>s
+	/// </summary>
+	public abstract class CodecBase : Codec, IDisposable
+	{
+
+        #region Data members
+
+        /// <summary>
+        /// Instance of the internal zlib buffer structure that is 
+        /// passed to all functions in the zlib dll
+        /// </summary>
+        internal ZStream _ztream = new ZStream();
+
+        /// <summary>
+        /// True if the object instance has been disposed, false otherwise
+        /// </summary>
+        protected bool _isDisposed = false;
+
+        /// <summary>
+        /// The size of the internal buffers
+        /// </summary>
+        protected const int kBufferSize = 16384;
+
+        private byte[] _outBuffer = new byte[kBufferSize];
+        private byte[] _inBuffer = new byte[kBufferSize];
+
+        private GCHandle _hInput;
+        private GCHandle _hOutput;
+
+        private uint _checksum = 0;
+
+        #endregion
+
+        /// <summary>
+        /// Initializes a new instance of the <c>CodeBase</c> class. 
+        /// </summary>
+		public CodecBase()
+		{
+            try
+            {
+                _hInput = GCHandle.Alloc(_inBuffer, GCHandleType.Pinned);
+                _hOutput = GCHandle.Alloc(_outBuffer, GCHandleType.Pinned);
+            }
+            catch (Exception)
+            {
+                CleanUp(false);
+                throw;
+            }
+        }
+
+
+        #region Codec Members
+
+        /// <summary>
+        /// Occurs when more processed data are available.
+        /// </summary>
+        public event DataAvailableHandler DataAvailable;
+
+        /// <summary>
+        /// Fires the <see cref="DataAvailable"/> event
+        /// </summary>
+        protected void OnDataAvailable()
+        {
+            if (_ztream.total_out > 0)
+            {
+                if (DataAvailable != null)
+                    DataAvailable( _outBuffer, 0, (int)_ztream.total_out); 
+                resetOutput();
+            }
+        }
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        public void Add(byte[] data)
+        {
+            Add(data,0,data.Length);
+        }
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+        /// <param name="count">The number of bytes to add</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        /// <remarks>This must be implemented by a derived class</remarks>
+        public abstract void Add(byte[] data, int offset, int count);
+
+        /// <summary>
+        /// Finishes up any pending data that needs to be processed and handled.
+        /// </summary>
+        /// <remarks>This must be implemented by a derived class</remarks>
+        public abstract void Finish();
+
+        /// <summary>
+        /// Gets the checksum of the data that has been added so far
+        /// </summary>
+        public uint Checksum { get { return _checksum; } }
+
+        #endregion
+
+        #region Destructor & IDisposable stuff
+
+        /// <summary>
+        /// Destroys this instance
+        /// </summary>
+        ~CodecBase()
+        {
+            CleanUp(false);
+        }
+
+        /// <summary>
+        /// Releases any unmanaged resources and calls the <see cref="CleanUp()"/> method of the derived class
+        /// </summary>
+        public void Dispose()
+        {
+            CleanUp(true);
+        }
+
+        /// <summary>
+        /// Performs any codec specific cleanup
+        /// </summary>
+        /// <remarks>This must be implemented by a derived class</remarks>
+        protected abstract void CleanUp();
+
+        // performs the release of the handles and calls the dereived CleanUp()
+        private void CleanUp(bool isDisposing)
+        {
+            if (!_isDisposed)
+            {
+                CleanUp();
+                if (_hInput.IsAllocated)
+                    _hInput.Free();
+                if (_hOutput.IsAllocated)
+                    _hOutput.Free();
+
+                _isDisposed = true;
+            }
+        }
+
+
+        #endregion
+
+        #region Helper methods
+
+        /// <summary>
+        /// Copies a number of bytes to the internal codec buffer - ready for proccesing
+        /// </summary>
+        /// <param name="data">The byte array that contains the data to copy</param>
+        /// <param name="startIndex">The index of the first byte to copy</param>
+        /// <param name="count">The number of bytes to copy from <c>data</c></param>
+        protected void copyInput(byte[] data, int startIndex, int count)
+        {
+            Array.Copy(data, startIndex, _inBuffer,0, count);
+            _ztream.next_in = _hInput.AddrOfPinnedObject();
+            _ztream.total_in = 0;
+            _ztream.avail_in = (uint)count;
+
+        }
+
+        /// <summary>
+        /// Resets the internal output buffers to a known state - ready for processing
+        /// </summary>
+        protected void resetOutput()
+        {
+            _ztream.total_out = 0;
+            _ztream.avail_out = kBufferSize;
+            _ztream.next_out = _hOutput.AddrOfPinnedObject();
+        }
+
+        /// <summary>
+        /// Updates the running checksum property
+        /// </summary>
+        /// <param name="newSum">The new checksum value</param>
+        protected void setChecksum(uint newSum)
+        {
+            _checksum = newSum;
+        }
+        #endregion
+
+    }
+}

contrib/dotzlib/DotZLib/Deflater.cs

@@ -0,0 +1,106 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Diagnostics;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+
+    /// <summary>
+    /// Implements a data compressor, using the deflate algorithm in the ZLib dll
+    /// </summary>
+	public sealed class Deflater : CodecBase
+	{
+        #region Dll imports
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)]
+        private static extern int deflateInit_(ref ZStream sz, int level, string vs, int size);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int deflate(ref ZStream sz, int flush);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int deflateReset(ref ZStream sz);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int deflateEnd(ref ZStream sz);
+        #endregion
+
+        /// <summary>
+        /// Constructs an new instance of the <c>Deflater</c>
+        /// </summary>
+        /// <param name="level">The compression level to use for this <c>Deflater</c></param>
+		public Deflater(CompressLevel level) : base()
+		{
+            int retval = deflateInit_(ref _ztream, (int)level, Info.Version, Marshal.SizeOf(_ztream));
+            if (retval != 0)
+                throw new ZLibException(retval, "Could not initialize deflater");
+
+            resetOutput();
+		}
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+        /// <param name="count">The number of bytes to add</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        public override void Add(byte[] data, int offset, int count)
+        {
+            if (data == null) throw new ArgumentNullException();
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > data.Length) throw new ArgumentException();
+            
+            int total = count;
+            int inputIndex = offset;
+            int err = 0;
+
+            while (err >= 0 && inputIndex < total)
+            {
+                copyInput(data, inputIndex, Math.Min(total - inputIndex, kBufferSize));
+                while (err >= 0 && _ztream.avail_in > 0)
+                {
+                    err = deflate(ref _ztream, (int)FlushTypes.None);
+                    if (err == 0)
+                        while (_ztream.avail_out == 0)
+                        {
+                            OnDataAvailable();
+                            err = deflate(ref _ztream, (int)FlushTypes.None);
+                        }
+                    inputIndex += (int)_ztream.total_in;
+                }
+            }
+            setChecksum( _ztream.adler );
+        }
+
+
+        /// <summary>
+        /// Finishes up any pending data that needs to be processed and handled.
+        /// </summary>
+        public override void Finish()
+        {
+            int err;
+            do 
+            {
+                err = deflate(ref _ztream, (int)FlushTypes.Finish);
+                OnDataAvailable();
+            }
+            while (err == 0);
+            setChecksum( _ztream.adler );
+            deflateReset(ref _ztream);
+            resetOutput();
+        }
+
+        /// <summary>
+        /// Closes the internal zlib deflate stream
+        /// </summary>
+        protected override void CleanUp() { deflateEnd(ref _ztream); }
+
+    }
+}

contrib/dotzlib/DotZLib/DotZLib.cs

@@ -0,0 +1,288 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.IO;
+using System.Runtime.InteropServices;
+using System.Text;
+
+
+namespace DotZLib
+{
+
+    #region Internal types
+
+    /// <summary>
+    /// Defines constants for the various flush types used with zlib
+    /// </summary>
+    internal enum FlushTypes 
+    {
+        None,  Partial,  Sync,  Full,  Finish,  Block
+    }
+
+    #region ZStream structure
+    // internal mapping of the zlib zstream structure for marshalling
+    [StructLayoutAttribute(LayoutKind.Sequential, Pack=4, Size=0, CharSet=CharSet.Ansi)]
+    internal struct ZStream
+    {
+        public IntPtr next_in;
+        public uint avail_in;
+        public uint total_in;
+
+        public IntPtr next_out;
+        public uint avail_out;
+        public uint total_out;
+
+        [MarshalAs(UnmanagedType.LPStr)]
+        string msg; 
+        uint state;
+
+        uint zalloc;
+        uint zfree;
+        uint opaque;
+
+        int data_type;
+        public uint adler;
+        uint reserved;
+    }
+
+    #endregion
+    
+    #endregion
+
+    #region Public enums
+    /// <summary>
+    /// Defines constants for the available compression levels in zlib
+    /// </summary>
+    public enum CompressLevel : int
+    {
+        /// <summary>
+        /// The default compression level with a reasonable compromise between compression and speed
+        /// </summary>
+        Default = -1,   
+        /// <summary>
+        /// No compression at all. The data are passed straight through.
+        /// </summary>
+        None = 0,
+        /// <summary>
+        /// The maximum compression rate available.
+        /// </summary>
+        Best = 9,   
+        /// <summary>
+        /// The fastest available compression level.
+        /// </summary>
+        Fastest = 1
+    }
+    #endregion
+
+    #region Exception classes
+    /// <summary>
+    /// The exception that is thrown when an error occurs on the zlib dll
+    /// </summary>
+    public class ZLibException : ApplicationException
+    {
+        /// <summary>
+        /// Initializes a new instance of the <see cref="ZLibException"/> class with a specified 
+        /// error message and error code
+        /// </summary>
+        /// <param name="errorCode">The zlib error code that caused the exception</param>
+        /// <param name="msg">A message that (hopefully) describes the error</param>
+        public ZLibException(int errorCode, string msg) : base(String.Format("ZLib error {0} {1}", errorCode, msg))
+        {
+        }
+
+        /// <summary>
+        /// Initializes a new instance of the <see cref="ZLibException"/> class with a specified 
+        /// error code
+        /// </summary>
+        /// <param name="errorCode">The zlib error code that caused the exception</param>
+        public ZLibException(int errorCode) : base(String.Format("ZLib error {0}", errorCode))
+        {
+        }
+    }
+    #endregion
+
+    #region Interfaces
+
+    /// <summary>
+    /// Declares methods and properties that enables a running checksum to be calculated 
+    /// </summary>
+    public interface ChecksumGenerator
+    {
+        /// <summary>
+        /// Gets the current value of the checksum
+        /// </summary>
+        uint Value { get; }
+
+        /// <summary>
+        /// Clears the current checksum to 0
+        /// </summary>
+        void Reset();
+
+        /// <summary>
+        /// Updates the current checksum with an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        void Update(byte[] data);
+
+        /// <summary>
+        /// Updates the current checksum with part of an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        /// <param name="offset">Where in <c>data</c> to start updating</param>
+        /// <param name="count">The number of bytes from <c>data</c> to use</param>
+        /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+        /// <exception cref="ArgumentNullException"><c>data</c> is a null reference</exception>
+        /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+        void Update(byte[] data, int offset, int count);
+
+        /// <summary>
+        /// Updates the current checksum with the data from a string
+        /// </summary>
+        /// <param name="data">The string to update the checksum with</param>
+        /// <remarks>The characters in the string are converted by the UTF-8 encoding</remarks>
+        void Update(string data);
+
+        /// <summary>
+        /// Updates the current checksum with the data from a string, using a specific encoding
+        /// </summary>
+        /// <param name="data">The string to update the checksum with</param>
+        /// <param name="encoding">The encoding to use</param>
+        void Update(string data, Encoding encoding);
+    }
+
+
+    /// <summary>
+    /// Represents the method that will be called from a codec when new data
+    /// are available.
+    /// </summary>
+    /// <paramref name="data">The byte array containing the processed data</paramref>
+    /// <paramref name="startIndex">The index of the first processed byte in <c>data</c></paramref>
+    /// <paramref name="count">The number of processed bytes available</paramref>
+    /// <remarks>On return from this method, the data may be overwritten, so grab it while you can. 
+    /// You cannot assume that startIndex will be zero.
+    /// </remarks>
+    public delegate void DataAvailableHandler(byte[] data, int startIndex, int count);
+
+    /// <summary>
+    /// Declares methods and events for implementing compressors/decompressors
+    /// </summary>
+    public interface Codec
+    {
+        /// <summary>
+        /// Occurs when more processed data are available.
+        /// </summary>
+        event DataAvailableHandler DataAvailable;
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        void Add(byte[] data);
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+        /// <param name="count">The number of bytes to add</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        void Add(byte[] data, int offset, int count);
+
+        /// <summary>
+        /// Finishes up any pending data that needs to be processed and handled.
+        /// </summary>
+        void Finish();
+
+        /// <summary>
+        /// Gets the checksum of the data that has been added so far
+        /// </summary>
+        uint Checksum { get; }
+
+
+    }
+
+    #endregion
+
+    #region Classes
+    /// <summary>
+    /// Encapsulates general information about the ZLib library
+    /// </summary>
+    public class Info
+    {
+        #region DLL imports
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern uint zlibCompileFlags();
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern string zlibVersion();
+        #endregion
+
+        #region Private stuff
+        private uint _flags;
+
+        // helper function that unpacks a bitsize mask
+        private static int bitSize(uint bits)
+        {
+            switch (bits)
+            {
+                case 0: return 16;
+                case 1: return 32;
+                case 2: return 64;
+            }
+            return -1;
+        }
+        #endregion
+
+        /// <summary>
+        /// Constructs an instance of the <c>Info</c> class.
+        /// </summary>
+        public Info()
+        {
+            _flags = zlibCompileFlags();
+        }
+
+        /// <summary>
+        /// True if the library is compiled with debug info
+        /// </summary>
+        public bool HasDebugInfo { get { return 0 != (_flags & 0x100); } }
+
+        /// <summary>
+        /// True if the library is compiled with assembly optimizations
+        /// </summary>
+        public bool UsesAssemblyCode { get { return 0 != (_flags & 0x200); } }
+
+        /// <summary>
+        /// Gets the size of the unsigned int that was compiled into Zlib
+        /// </summary>
+        public int SizeOfUInt { get { return bitSize(_flags & 3); } }
+
+        /// <summary>
+        /// Gets the size of the unsigned long that was compiled into Zlib
+        /// </summary>
+        public int SizeOfULong { get { return bitSize((_flags >> 2) & 3); } }
+
+        /// <summary>
+        /// Gets the size of the pointers that were compiled into Zlib
+        /// </summary>
+        public int SizeOfPointer { get { return bitSize((_flags >> 4) & 3); } }
+
+        /// <summary>
+        /// Gets the size of the z_off_t type that was compiled into Zlib
+        /// </summary>
+        public int SizeOfOffset { get { return bitSize((_flags >> 6) & 3); } }
+
+        /// <summary>
+        /// Gets the version of ZLib as a string, e.g. "1.2.1"
+        /// </summary>
+        public static string Version { get { return zlibVersion(); } }
+    }
+
+    #endregion
+
+}

contrib/dotzlib/DotZLib/DotZLib.csproj

@@ -0,0 +1,141 @@
+<VisualStudioProject>
+    <CSHARP
+        ProjectType = "Local"
+        ProductVersion = "7.10.3077"
+        SchemaVersion = "2.0"
+        ProjectGuid = "{BB1EE0B1-1808-46CB-B786-949D91117FC5}"
+    >
+        <Build>
+            <Settings
+                ApplicationIcon = ""
+                AssemblyKeyContainerName = ""
+                AssemblyName = "DotZLib"
+                AssemblyOriginatorKeyFile = ""
+                DefaultClientScript = "JScript"
+                DefaultHTMLPageLayout = "Grid"
+                DefaultTargetSchema = "IE50"
+                DelaySign = "false"
+                OutputType = "Library"
+                PreBuildEvent = ""
+                PostBuildEvent = ""
+                RootNamespace = "DotZLib"
+                RunPostBuildEvent = "OnBuildSuccess"
+                StartupObject = ""
+            >
+                <Config
+                    Name = "Debug"
+                    AllowUnsafeBlocks = "false"
+                    BaseAddress = "285212672"
+                    CheckForOverflowUnderflow = "false"
+                    ConfigurationOverrideFile = ""
+                    DefineConstants = "DEBUG;TRACE"
+                    DocumentationFile = "docs\DotZLib.xml"
+                    DebugSymbols = "true"
+                    FileAlignment = "4096"
+                    IncrementalBuild = "false"
+                    NoStdLib = "false"
+                    NoWarn = "1591"
+                    Optimize = "false"
+                    OutputPath = "bin\Debug\"
+                    RegisterForComInterop = "false"
+                    RemoveIntegerChecks = "false"
+                    TreatWarningsAsErrors = "false"
+                    WarningLevel = "4"
+                />
+                <Config
+                    Name = "Release"
+                    AllowUnsafeBlocks = "false"
+                    BaseAddress = "285212672"
+                    CheckForOverflowUnderflow = "false"
+                    ConfigurationOverrideFile = ""
+                    DefineConstants = "TRACE"
+                    DocumentationFile = "docs\DotZLib.xml"
+                    DebugSymbols = "false"
+                    FileAlignment = "4096"
+                    IncrementalBuild = "false"
+                    NoStdLib = "false"
+                    NoWarn = ""
+                    Optimize = "true"
+                    OutputPath = "bin\Release\"
+                    RegisterForComInterop = "false"
+                    RemoveIntegerChecks = "false"
+                    TreatWarningsAsErrors = "false"
+                    WarningLevel = "4"
+                />
+            </Settings>
+            <References>
+                <Reference
+                    Name = "System"
+                    AssemblyName = "System"
+                    HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\System.dll"
+                />
+                <Reference
+                    Name = "System.Data"
+                    AssemblyName = "System.Data"
+                    HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\System.Data.dll"
+                />
+                <Reference
+                    Name = "System.XML"
+                    AssemblyName = "System.Xml"
+                    HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\System.XML.dll"
+                />
+                <Reference
+                    Name = "nunit.framework"
+                    AssemblyName = "nunit.framework"
+                    HintPath = "E:\apps\NUnit V2.1\\bin\nunit.framework.dll"
+                    AssemblyFolderKey = "hklm\dn\nunit.framework"
+                />
+            </References>
+        </Build>
+        <Files>
+            <Include>
+                <File
+                    RelPath = "AssemblyInfo.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "ChecksumImpl.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "CircularBuffer.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "CodecBase.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "Deflater.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "DotZLib.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "GZipStream.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "Inflater.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "UnitTests.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+            </Include>
+        </Files>
+    </CSHARP>
+</VisualStudioProject>
+

contrib/dotzlib/DotZLib/GZipStream.cs

@@ -0,0 +1,301 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.IO;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+	/// <summary>
+	/// Implements a compressed <see cref="Stream"/>, in GZip (.gz) format.
+	/// </summary>
+	public class GZipStream : Stream, IDisposable
+	{
+        #region Dll Imports
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)]
+        private static extern IntPtr gzopen(string name, string mode);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzclose(IntPtr gzFile);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzwrite(IntPtr gzFile, int data, int length);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzread(IntPtr gzFile, int data, int length);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzgetc(IntPtr gzFile);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzputc(IntPtr gzFile, int c);
+
+        #endregion
+
+        #region Private data
+        private IntPtr _gzFile;
+        private bool _isDisposed = false;
+        private bool _isWriting;
+        #endregion
+
+        #region Constructors
+        /// <summary>
+        /// Creates a new file as a writeable GZipStream
+        /// </summary>
+        /// <param name="fileName">The name of the compressed file to create</param>
+        /// <param name="level">The compression level to use when adding data</param>
+        /// <exception cref="ZLibException">If an error occurred in the internal zlib function</exception>
+		public GZipStream(string fileName, CompressLevel level)
+		{
+            _isWriting = true;
+            _gzFile = gzopen(fileName, String.Format("wb{0}", (int)level));
+            if (_gzFile == IntPtr.Zero)
+                throw new ZLibException(-1, "Could not open " + fileName);
+		}
+
+        /// <summary>
+        /// Opens an existing file as a readable GZipStream
+        /// </summary>
+        /// <param name="fileName">The name of the file to open</param>
+        /// <exception cref="ZLibException">If an error occurred in the internal zlib function</exception>
+        public GZipStream(string fileName)
+        {
+            _isWriting = false;
+            _gzFile = gzopen(fileName, "rb");
+            if (_gzFile == IntPtr.Zero)
+                throw new ZLibException(-1, "Could not open " + fileName);
+
+        }
+        #endregion
+
+        #region Access properties
+        /// <summary>
+        /// Returns true of this stream can be read from, false otherwise
+        /// </summary>
+        public override bool CanRead
+        {
+            get
+            {
+                return !_isWriting;
+            }
+        }
+    
+
+        /// <summary>
+        /// Returns false.
+        /// </summary>
+        public override bool CanSeek
+        {
+            get
+            {
+                return false;
+            }
+        }
+    
+        /// <summary>
+        /// Returns true if this tsream is writeable, false otherwise
+        /// </summary>
+        public override bool CanWrite
+        {
+            get
+            {
+                return _isWriting;
+            }
+        }
+        #endregion
+    
+        #region Destructor & IDispose stuff
+
+        /// <summary>
+        /// Destroys this instance
+        /// </summary>
+        ~GZipStream()
+        {
+            cleanUp(false);
+        }
+
+        /// <summary>
+        /// Closes the external file handle
+        /// </summary>
+        public void Dispose()
+        {
+            cleanUp(true);
+        }
+
+        // Does the actual closing of the file handle.
+        private void cleanUp(bool isDisposing)
+        {
+            if (!_isDisposed)
+            {
+                gzclose(_gzFile);
+                _isDisposed = true;
+            }
+        }
+        #endregion
+    
+        #region Basic reading and writing
+        /// <summary>
+        /// Attempts to read a number of bytes from the stream.
+        /// </summary>
+        /// <param name="buffer">The destination data buffer</param>
+        /// <param name="offset">The index of the first destination byte in <c>buffer</c></param>
+        /// <param name="count">The number of bytes requested</param>
+        /// <returns>The number of bytes read</returns>
+        /// <exception cref="ArgumentNullException">If <c>buffer</c> is null</exception>
+        /// <exception cref="ArgumentOutOfRangeException">If <c>count</c> or <c>offset</c> are negative</exception>
+        /// <exception cref="ArgumentException">If <c>offset</c>  + <c>count</c> is &gt; buffer.Length</exception>
+        /// <exception cref="NotSupportedException">If this stream is not readable.</exception>
+        /// <exception cref="ObjectDisposedException">If this stream has been disposed.</exception>
+        public override int Read(byte[] buffer, int offset, int count)
+        {
+            if (!CanRead) throw new NotSupportedException();
+            if (buffer == null) throw new ArgumentNullException();
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > buffer.Length) throw new ArgumentException();
+            if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+
+            GCHandle h = GCHandle.Alloc(buffer, GCHandleType.Pinned);
+            int result;
+            try
+            {
+                result = gzread(_gzFile, h.AddrOfPinnedObject().ToInt32() + offset, count);
+                if (result < 0)
+                    throw new IOException();
+            }
+            finally
+            {
+                h.Free();
+            }
+            return result;
+        }
+
+        /// <summary>
+        /// Attempts to read a single byte from the stream.
+        /// </summary>
+        /// <returns>The byte that was read, or -1 in case of error or End-Of-File</returns>
+        public override int ReadByte()
+        {
+            if (!CanRead) throw new NotSupportedException();
+            if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+            return gzgetc(_gzFile);
+        }
+
+        /// <summary>
+        /// Writes a number of bytes to the stream
+        /// </summary>
+        /// <param name="buffer"></param>
+        /// <param name="offset"></param>
+        /// <param name="count"></param>
+        /// <exception cref="ArgumentNullException">If <c>buffer</c> is null</exception>
+        /// <exception cref="ArgumentOutOfRangeException">If <c>count</c> or <c>offset</c> are negative</exception>
+        /// <exception cref="ArgumentException">If <c>offset</c>  + <c>count</c> is &gt; buffer.Length</exception>
+        /// <exception cref="NotSupportedException">If this stream is not writeable.</exception>
+        /// <exception cref="ObjectDisposedException">If this stream has been disposed.</exception>
+        public override void Write(byte[] buffer, int offset, int count)
+        {
+            if (!CanWrite) throw new NotSupportedException();
+            if (buffer == null) throw new ArgumentNullException();
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > buffer.Length) throw new ArgumentException();
+            if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+
+            GCHandle h = GCHandle.Alloc(buffer, GCHandleType.Pinned);
+            try
+            {
+                int result = gzwrite(_gzFile, h.AddrOfPinnedObject().ToInt32() + offset, count);
+                if (result < 0)
+                    throw new IOException();
+            }
+            finally
+            {
+                h.Free();
+            }
+        }
+
+        /// <summary>
+        /// Writes a single byte to the stream
+        /// </summary>
+        /// <param name="value">The byte to add to the stream.</param>
+        /// <exception cref="NotSupportedException">If this stream is not writeable.</exception>
+        /// <exception cref="ObjectDisposedException">If this stream has been disposed.</exception>
+        public override void WriteByte(byte value)
+        {
+            if (!CanWrite) throw new NotSupportedException();
+            if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+
+            int result = gzputc(_gzFile, (int)value);
+            if (result < 0)
+                throw new IOException();
+        }
+        #endregion
+
+        #region Position & length stuff
+        /// <summary>
+        /// Not supported.
+        /// </summary>
+        /// <param name="value"></param>
+        /// <exception cref="NotSupportedException">Always thrown</exception>
+        public override void SetLength(long value)
+        {
+            throw new NotSupportedException();
+        }
+    
+        /// <summary>
+        ///  Not suppported.
+        /// </summary>
+        /// <param name="offset"></param>
+        /// <param name="origin"></param>
+        /// <returns></returns>
+        /// <exception cref="NotSupportedException">Always thrown</exception>
+        public override long Seek(long offset, SeekOrigin origin)
+        {
+            throw new NotSupportedException();
+        }
+    
+        /// <summary>
+        /// Flushes the <c>GZipStream</c>.
+        /// </summary>
+        /// <remarks>In this implementation, this method does nothing. This is because excessive
+        /// flushing may degrade the achievable compression rates.</remarks>
+        public override void Flush()
+        {
+            // left empty on purpose
+        }
+    
+        /// <summary>
+        /// Gets/sets the current position in the <c>GZipStream</c>. Not suppported.
+        /// </summary>
+        /// <remarks>In this implementation this property is not supported</remarks>
+        /// <exception cref="NotSupportedException">Always thrown</exception>
+        public override long Position
+        {
+            get
+            {
+                throw new NotSupportedException();
+            }
+            set
+            {
+                throw new NotSupportedException();
+            }
+        }
+    
+        /// <summary>
+        /// Gets the size of the stream. Not suppported.
+        /// </summary>
+        /// <remarks>In this implementation this property is not supported</remarks>
+        /// <exception cref="NotSupportedException">Always thrown</exception>
+        public override long Length
+        {
+            get
+            {
+                throw new NotSupportedException();
+            }
+        }
+        #endregion
+    }
+}

contrib/dotzlib/DotZLib/Inflater.cs

@@ -0,0 +1,105 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Diagnostics;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+    
+    /// <summary>
+    /// Implements a data decompressor, using the inflate algorithm in the ZLib dll
+    /// </summary>
+    public class Inflater : CodecBase
+	{
+        #region Dll imports
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)]
+        private static extern int inflateInit_(ref ZStream sz, string vs, int size);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int inflate(ref ZStream sz, int flush);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int inflateReset(ref ZStream sz);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int inflateEnd(ref ZStream sz);
+        #endregion
+
+        /// <summary>
+        /// Constructs an new instance of the <c>Inflater</c>
+        /// </summary>
+        public Inflater() : base()
+		{
+            int retval = inflateInit_(ref _ztream, Info.Version, Marshal.SizeOf(_ztream));
+            if (retval != 0)
+                throw new ZLibException(retval, "Could not initialize inflater");
+
+            resetOutput();
+        }
+
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+        /// <param name="count">The number of bytes to add</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        public override void Add(byte[] data, int offset, int count)
+        {
+            if (data == null) throw new ArgumentNullException();
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > data.Length) throw new ArgumentException();
+
+            int total = count;
+            int inputIndex = offset;
+            int err = 0;
+
+            while (err >= 0 && inputIndex < total)
+            {
+                copyInput(data, inputIndex, Math.Min(total - inputIndex, kBufferSize));
+                err = inflate(ref _ztream, (int)FlushTypes.None);
+                if (err == 0)
+                    while (_ztream.avail_out == 0)
+                    {
+                        OnDataAvailable();
+                        err = inflate(ref _ztream, (int)FlushTypes.None);
+                    }
+
+                inputIndex += (int)_ztream.total_in;
+            }
+            setChecksum( _ztream.adler );
+        }
+
+
+        /// <summary>
+        /// Finishes up any pending data that needs to be processed and handled.
+        /// </summary>
+        public override void Finish()
+        {
+            int err;
+            do 
+            {
+                err = inflate(ref _ztream, (int)FlushTypes.Finish);
+                OnDataAvailable();
+            }
+            while (err == 0);
+            setChecksum( _ztream.adler );
+            inflateReset(ref _ztream);
+            resetOutput();
+        }
+
+        /// <summary>
+        /// Closes the internal zlib inflate stream
+        /// </summary>
+        protected override void CleanUp() { inflateEnd(ref _ztream); }
+
+
+	}
+}

contrib/dotzlib/DotZLib/UnitTests.cs

@@ -0,0 +1,274 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Collections;
+using System.IO;
+
+// uncomment the define below to include unit tests
+//#define nunit
+#if nunit
+using NUnit.Framework;
+
+// Unit tests for the DotZLib class library
+// ----------------------------------------
+//
+// Use this with NUnit 2 from http://www.nunit.org
+//
+
+namespace DotZLibTests
+{
+    using DotZLib;
+
+    // helper methods
+    internal class Utils
+    {
+        public static bool byteArrEqual( byte[] lhs, byte[] rhs )
+        {
+            if (lhs.Length != rhs.Length)
+                return false;
+            for (int i = lhs.Length-1; i >= 0; --i)
+                if (lhs[i] != rhs[i])
+                    return false;
+            return true;
+        }
+
+    }
+
+
+    [TestFixture]
+    public class CircBufferTests
+    {
+        #region Circular buffer tests
+        [Test]
+        public void SinglePutGet()
+        {
+            CircularBuffer buf = new CircularBuffer(10);
+            Assert.AreEqual( 0, buf.Size );
+            Assert.AreEqual( -1, buf.Get() );
+
+            Assert.IsTrue(buf.Put( 1 ));
+            Assert.AreEqual( 1, buf.Size );
+            Assert.AreEqual( 1, buf.Get() );
+            Assert.AreEqual( 0, buf.Size );
+            Assert.AreEqual( -1, buf.Get() );
+        }
+
+        [Test]
+        public void BlockPutGet()
+        {
+            CircularBuffer buf = new CircularBuffer(10);
+            byte[] arr = {1,2,3,4,5,6,7,8,9,10};
+            Assert.AreEqual( 10, buf.Put(arr,0,10) );
+            Assert.AreEqual( 10, buf.Size );
+            Assert.IsFalse( buf.Put(11) );
+            Assert.AreEqual( 1, buf.Get() );
+            Assert.IsTrue( buf.Put(11) );
+
+            byte[] arr2 = (byte[])arr.Clone();
+            Assert.AreEqual( 9, buf.Get(arr2,1,9) );
+            Assert.IsTrue( Utils.byteArrEqual(arr,arr2) );
+        }
+
+        #endregion
+    }
+
+    [TestFixture]
+    public class ChecksumTests
+    {
+        #region CRC32 Tests
+        [Test]
+        public void CRC32_Null()
+        {
+            CRC32Checksum crc32 = new CRC32Checksum();
+            Assert.AreEqual( 0, crc32.Value );
+
+            crc32 = new CRC32Checksum(1);
+            Assert.AreEqual( 1, crc32.Value );
+
+            crc32 = new CRC32Checksum(556);
+            Assert.AreEqual( 556, crc32.Value );
+        }
+
+        [Test]
+        public void CRC32_Data()
+        {
+            CRC32Checksum crc32 = new CRC32Checksum();
+            byte[] data = { 1,2,3,4,5,6,7 };
+            crc32.Update(data);
+            Assert.AreEqual( 0x70e46888, crc32.Value  );
+
+            crc32 = new CRC32Checksum();
+            crc32.Update("penguin");
+            Assert.AreEqual( 0x0e5c1a120, crc32.Value );
+
+            crc32 = new CRC32Checksum(1);
+            crc32.Update("penguin");
+            Assert.AreEqual(0x43b6aa94, crc32.Value);
+
+        }
+        #endregion
+
+        #region Adler tests
+
+        [Test]
+        public void Adler_Null()
+        {
+            AdlerChecksum adler = new AdlerChecksum();
+            Assert.AreEqual(0, adler.Value);
+
+            adler = new AdlerChecksum(1);
+            Assert.AreEqual( 1, adler.Value );
+
+            adler = new AdlerChecksum(556);
+            Assert.AreEqual( 556, adler.Value );
+        }
+
+        [Test]
+        public void Adler_Data()
+        {
+            AdlerChecksum adler = new AdlerChecksum(1);
+            byte[] data = { 1,2,3,4,5,6,7 };
+            adler.Update(data);
+            Assert.AreEqual( 0x5b001d, adler.Value  );
+
+            adler = new AdlerChecksum();
+            adler.Update("penguin");
+            Assert.AreEqual(0x0bcf02f6, adler.Value );
+
+            adler = new AdlerChecksum(1);
+            adler.Update("penguin");
+            Assert.AreEqual(0x0bd602f7, adler.Value);
+
+        }
+        #endregion
+    }
+
+    [TestFixture]
+    public class InfoTests
+    {
+        #region Info tests
+        [Test]
+        public void Info_Version()
+        {
+            Info info = new Info();
+            Assert.AreEqual("1.2.2", Info.Version);
+            Assert.AreEqual(32, info.SizeOfUInt);
+            Assert.AreEqual(32, info.SizeOfULong);
+            Assert.AreEqual(32, info.SizeOfPointer);
+            Assert.AreEqual(32, info.SizeOfOffset);
+        }
+        #endregion
+    }
+
+    [TestFixture]
+    public class DeflateInflateTests
+    {
+        #region Deflate tests
+        [Test]
+        public void Deflate_Init()
+        {
+            using (Deflater def = new Deflater(CompressLevel.Default))
+            {
+            }
+        }
+
+        private ArrayList compressedData = new ArrayList();
+        private uint adler1;
+
+        private ArrayList uncompressedData = new ArrayList();
+        private uint adler2;
+
+        public void CDataAvail(byte[] data, int startIndex, int count)
+        {
+            for (int i = 0; i < count; ++i)
+                compressedData.Add(data[i+startIndex]);
+        }
+
+        [Test]
+        public void Deflate_Compress()
+        {
+            compressedData.Clear();
+
+            byte[] testData = new byte[35000];
+            for (int i = 0; i < testData.Length; ++i)
+                testData[i] = 5;
+
+            using (Deflater def = new Deflater((CompressLevel)5))
+            {
+                def.DataAvailable += new DataAvailableHandler(CDataAvail);
+                def.Add(testData);
+                def.Finish();
+                adler1 = def.Checksum;
+            }
+        }
+        #endregion
+
+        #region Inflate tests
+        [Test]
+        public void Inflate_Init()
+        {
+            using (Inflater inf = new Inflater())
+            {
+            }
+        }
+
+        private void DDataAvail(byte[] data, int startIndex, int count)
+        {
+            for (int i = 0; i < count; ++i)
+                uncompressedData.Add(data[i+startIndex]);
+        }
+
+        [Test]
+        public void Inflate_Expand()
+        { 
+            uncompressedData.Clear();
+
+            using (Inflater inf = new Inflater())
+            {
+                inf.DataAvailable += new DataAvailableHandler(DDataAvail);
+                inf.Add((byte[])compressedData.ToArray(typeof(byte)));
+                inf.Finish();
+                adler2 = inf.Checksum;
+            }
+            Assert.AreEqual( adler1, adler2 );
+        }
+        #endregion
+    }
+
+    [TestFixture]
+    public class GZipStreamTests
+    {
+        #region GZipStream test
+        [Test]
+        public void GZipStream_WriteRead()
+        {
+            using (GZipStream gzOut = new GZipStream("gzstream.gz", CompressLevel.Best))
+            {
+                BinaryWriter writer = new BinaryWriter(gzOut);
+                writer.Write("hi there");
+                writer.Write(Math.PI);
+                writer.Write(42);
+            }
+
+            using (GZipStream gzIn = new GZipStream("gzstream.gz"))
+            {
+                BinaryReader reader = new BinaryReader(gzIn);
+                string s = reader.ReadString();
+                Assert.AreEqual("hi there",s);
+                double d = reader.ReadDouble();
+                Assert.AreEqual(Math.PI, d);
+                int i = reader.ReadInt32();
+                Assert.AreEqual(42,i);
+            }
+
+        }
+        #endregion
+	}
+}
+
+#endif

contrib/dotzlib/LICENSE_1_0.txt

@@ -0,0 +1,23 @@
+Boost Software License - Version 1.0 - August 17th, 2003
+
+Permission is hereby granted, free of charge, to any person or organization
+obtaining a copy of the software and accompanying documentation covered by
+this license (the "Software") to use, reproduce, display, distribute,
+execute, and transmit the Software, and to prepare derivative works of the
+Software, and to permit third-parties to whom the Software is furnished to
+do so, all subject to the following:
+
+The copyright notices in the Software and this entire statement, including
+the above license grant, this restriction and the following disclaimer,
+must be included in all copies of the Software, in whole or in part, and
+all derivative works of the Software, unless such copies or derivative
+works are solely in the form of machine-executable object code generated by
+a source language processor.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT
+SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE
+FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE,
+ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+DEALINGS IN THE SOFTWARE.

contrib/dotzlib/readme.txt

@@ -0,0 +1,58 @@
+This directory contains a .Net wrapper class library for the ZLib1.dll
+
+The wrapper includes support for inflating/deflating memory buffers, 
+.Net streaming wrappers for the gz streams part of zlib, and wrappers
+for the checksum parts of zlib. See DotZLib/UnitTests.cs for examples.
+
+Directory structure:
+--------------------
+
+LICENSE_1_0.txt       - License file.
+readme.txt            - This file.
+DotZLib.chm           - Class library documentation
+DotZLib.build         - NAnt build file
+DotZLib.sln           - Microsoft Visual Studio 2003 solution file
+
+DotZLib\*.cs          - Source files for the class library
+
+Unit tests:
+-----------
+The file DotZLib/UnitTests.cs contains unit tests for use with NUnit 2.1 or higher.
+To include unit tests in the build, define nunit before building.
+
+
+Build instructions:
+-------------------
+
+1. Using Visual Studio.Net 2003:
+   Open DotZLib.sln in VS.Net and build from there. Output file (DotZLib.dll)
+   will be found ./DotZLib/bin/release or ./DotZLib/bin/debug, depending on 
+   you are building the release or debug version of the library. Check 
+   DotZLib/UnitTests.cs for instructions on how to include unit tests in the
+   build.
+   
+2. Using NAnt:
+   Open a command prompt with access to the build environment and run nant
+   in the same directory as the DotZLib.build file.
+   You can define 2 properties on the nant command-line to control the build:
+   debug={true|false} to toggle between release/debug builds (default=true).
+   nunit={true|false} to include or esclude unit tests (default=true).
+   Also the target clean will remove binaries.
+   Output file (DotZLib.dll) will be found in either ./DotZLib/bin/release 
+   or ./DotZLib/bin/debug, depending on whether you are building the release 
+   or debug version of the library.
+
+   Examples: 
+     nant -D:debug=false -D:nunit=false
+       will build a release mode version of the library without unit tests.
+     nant
+       will build a debug version of the library with unit tests 
+     nant clean
+       will remove all previously built files.
+
+
+---------------------------------
+Copyright (c) Henrik Ravn 2004
+
+Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+(See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)

contrib/infback9/infback9.c

@@ -430,6 +430,9 @@ void FAR *out_desc;
                 }
             }
 
+            /* handle error breaks in while */
+            if (mode == BAD) break;
+
             /* build code tables */
             state->next = state->codes;
             lencode = (code const FAR *)(state->next);

contrib/infback9/infback9.h

@@ -16,6 +16,10 @@
  * zlib.h must be included before this header file.
  */
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 ZEXTERN int ZEXPORT inflateBack9 OF((z_stream FAR *strm,
                                     in_func in, void FAR *in_desc,
                                     out_func out, void FAR *out_desc));
@@ -27,3 +31,7 @@ ZEXTERN int ZEXPORT inflateBack9Init_ OF((z_stream FAR *strm,
 #define inflateBack9Init(strm, window) \
         inflateBack9Init_((strm), (window), \
         ZLIB_VERSION, sizeof(z_stream))
+
+#ifdef __cplusplus
+}
+#endif

contrib/infback9/inftree9.c

@@ -1,5 +1,5 @@
 /* inftree9.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2005 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate9_copyright[] =
-   " inflate9 1.2.1.1 Copyright 1995-2003 Mark Adler ";
+   " inflate9 1.2.2.3 Copyright 1995-2005 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -64,7 +64,7 @@ unsigned short FAR *work;
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
         130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
-        133, 133, 133, 133, 144, 202, 196};
+        133, 133, 133, 133, 144, 66, 71};
     static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
         65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,

contrib/inflate86/inffast.S

@@ -188,17 +188,8 @@
 /*
  * typedef enum inflate_mode consts, in inflate.h
  */
-#ifndef NO_GUNZIP
-#define GUNZIP
-#endif
-
-#ifdef GUNZIP
 #define INFLATE_MODE_TYPE 11  /* state->mode flags enum-ed in inflate.h */
 #define INFLATE_MODE_BAD  26
-#else
-#define INFLATE_MODE_TYPE 3
-#define INFLATE_MODE_BAD  17
-#endif
 
 
 #if ! defined( USE_MMX ) && ! defined( NO_MMX )

contrib/masm686/match.asm

@@ -12,6 +12,8 @@
 ; Based on match.S
 ; Written for zlib 1.1.2
 ; Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
+;
+; Modified by Gilles Vollant (2005) for add gzhead and gzindex
 
 	.686P
 	.MODEL	FLAT
@@ -39,6 +41,9 @@ ds_pending_buf_size	dd ?
 ds_pending_out		dd ?
 ds_pending		dd ?
 ds_wrap			dd ?
+; gzhead and gzindex are added in zlib 1.2.2.2 (see deflate.h)
+ds_gzhead               dd ?
+ds_gzindex              dd ?
 ds_data_type		db ?
 ds_method		db ?
 			db ?	; padding

contrib/masmx64/bld_ml64.bat

@@ -0,0 +1,2 @@
+ml64.exe /Flinffasx64 /c /Zi inffasx64.asm
+ml64.exe /Flgvmat64   /c /Zi gvmat64.asm

contrib/masmx64/gvmat64.asm

@@ -0,0 +1,464 @@
+;uInt longest_match_x64(
+;    deflate_state *s,
+;    IPos cur_match);                             /* current match */
+
+; gvmat64.asm -- Asm portion of the optimized longest_match for 32 bits x86
+; Copyright (C) 1995-2005 Jean-loup Gailly, Brian Raiter and Gilles Vollant.
+; File written by Gilles Vollant, by modifiying the longest_match
+;  from Jean-loup Gailly in deflate.c
+;  and modifying asm686 with masm, optimised assembly code from Brian Raiter,
+;      written 1998
+;         http://www.zlib.net
+;         http://www.winimage.com/zLibDll
+;         http://www.muppetlabs.com/~breadbox/software/assembly.html
+;
+; to compile this file, I use option
+;   ml64.exe /Flgvmat64 /c /Zi gvmat64.asm
+;   with Microsoft Macro Assembler (x64) for AMD64
+;
+;   ml64.exe is given with Visual Studio 2005, Windows 2003 server DDK
+;
+;   (you can get Windows 2003 server DDK with ml64 and cl for AMD64 from
+;      http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price)
+;
+; Be carrefull to adapt zlib1222add below to your version of zLib
+
+
+;uInt longest_match(s, cur_match)
+;    deflate_state *s;
+;    IPos cur_match;                             /* current match */
+.code
+longest_match PROC
+
+
+;LocalVarsSize   equ 88
+ LocalVarsSize   equ 72
+
+; register used : rax,rbx,rcx,rdx,rsi,rdi,r8,r9,r10,r11,r12
+; free register :  r14,r15
+; register can be saved : rsp
+
+ chainlenwmask   equ  rsp + 8 - LocalVarsSize    ; high word: current chain len
+                                                 ; low word: s->wmask
+;window          equ  rsp + xx - LocalVarsSize   ; local copy of s->window ; stored in r10
+;windowbestlen   equ  rsp + xx - LocalVarsSize   ; s->window + bestlen , use r10+r11
+;scanstart       equ  rsp + xx - LocalVarsSize   ; first two bytes of string ; stored in r12w
+;scanend         equ  rsp + xx - LocalVarsSize   ; last two bytes of string use ebx
+;scanalign       equ  rsp + xx - LocalVarsSize   ; dword-misalignment of string r13
+;bestlen         equ  rsp + xx - LocalVarsSize   ; size of best match so far -> r11d
+;scan            equ  rsp + xx - LocalVarsSize   ; ptr to string wanting match -> r9
+ nicematch       equ  rsp + 16 - LocalVarsSize   ; a good enough match size -> r14
+
+save_rdi        equ  rsp + 24 - LocalVarsSize
+save_rsi        equ  rsp + 32 - LocalVarsSize
+save_rbx        equ  rsp + 40 - LocalVarsSize
+save_rbp        equ  rsp + 48 - LocalVarsSize
+save_r12        equ  rsp + 56 - LocalVarsSize
+save_r13        equ  rsp + 64 - LocalVarsSize
+;save_r14        equ  rsp + 72 - LocalVarsSize
+;save_r15        equ  rsp + 80 - LocalVarsSize
+
+
+
+;  all the +4 offsets are due to the addition of pending_buf_size (in zlib
+;  in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, remove the +4).
+;  Note : these value are good with a 8 bytes boundary pack structure
+
+
+    MAX_MATCH           equ     258
+    MIN_MATCH           equ     3
+    MIN_LOOKAHEAD       equ     (MAX_MATCH+MIN_MATCH+1)
+
+
+;;; Offsets for fields in the deflate_state structure. These numbers
+;;; are calculated from the definition of deflate_state, with the
+;;; assumption that the compiler will dword-align the fields. (Thus,
+;;; changing the definition of deflate_state could easily cause this
+;;; program to crash horribly, without so much as a warning at
+;;; compile time. Sigh.)
+
+;  all the +zlib1222add offsets are due to the addition of fields
+;  in zlib in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+;  (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+;  if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
+
+zlib1222add     equ 8
+
+dsWSize         equ 56+zlib1222add+(zlib1222add/2)
+dsWMask         equ 64+zlib1222add+(zlib1222add/2)
+dsWindow        equ 72+zlib1222add
+dsPrev          equ 88+zlib1222add
+dsMatchLen      equ 128+zlib1222add
+dsPrevMatch     equ 132+zlib1222add
+dsStrStart      equ 140+zlib1222add
+dsMatchStart    equ 144+zlib1222add
+dsLookahead     equ 148+zlib1222add
+dsPrevLen       equ 152+zlib1222add
+dsMaxChainLen   equ 156+zlib1222add
+dsGoodMatch     equ 172+zlib1222add
+dsNiceMatch     equ 176+zlib1222add
+
+
+; parameter 1 in r8(deflate state s), param 2 in rdx (cur match)
+
+; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and
+; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp
+;
+; All registers must be preserved across the call, except for
+;   rax, rcx, rdx, r8, r-9, r10, and r11, which are scratch.
+
+
+
+;;; Save registers that the compiler may be using, and adjust esp to
+;;; make room for our stack frame.
+
+
+;;; Retrieve the function arguments. r8d will hold cur_match
+;;; throughout the entire function. edx will hold the pointer to the
+;;; deflate_state structure during the function's setup (before
+;;; entering the main loop.
+
+; parameter 1 in rcx (deflate_state* s), param 2 in edx -> r8 (cur match)
+
+; this clear high 32 bits of r8, which can be garbage in both r8 and rdx
+
+
+        mov [save_rdi],rdi
+        mov [save_rsi],rsi
+        mov [save_rbx],rbx
+        mov [save_rbp],rbp
+        mov r8d,edx
+        mov [save_r12],r12
+        mov [save_r13],r13
+;        mov [save_r14],r14
+;        mov [save_r15],r15
+
+
+;;; uInt wmask = s->w_mask;
+;;; unsigned chain_length = s->max_chain_length;
+;;; if (s->prev_length >= s->good_match) {
+;;;     chain_length >>= 2;
+;;; }
+
+        mov edi, [rcx + dsPrevLen]
+        mov esi, [rcx + dsGoodMatch]
+        mov eax, [rcx + dsWMask]
+        mov ebx, [rcx + dsMaxChainLen]
+        cmp edi, esi
+        jl  LastMatchGood
+        shr ebx, 2
+LastMatchGood:
+
+;;; chainlen is decremented once beforehand so that the function can
+;;; use the sign flag instead of the zero flag for the exit test.
+;;; It is then shifted into the high word, to make room for the wmask
+;;; value, which it will always accompany.
+
+        dec ebx
+        shl ebx, 16
+        or  ebx, eax
+        mov [chainlenwmask], ebx
+
+;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+        mov eax, [rcx + dsNiceMatch]
+        mov r10d, [rcx + dsLookahead]
+        cmp r10d, eax
+        cmovnl r10d, eax
+        mov [nicematch],r10d
+LookaheadLess:
+
+;;; register Bytef *scan = s->window + s->strstart;
+
+        mov r10, [rcx + dsWindow]
+        mov ebp, [rcx + dsStrStart]
+        lea r13, [r10 + rbp]
+
+;;; Determine how many bytes the scan ptr is off from being
+;;; dword-aligned.
+
+         mov r9,r13
+         neg r13
+         and r13,3
+
+;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+;;;     s->strstart - (IPos)MAX_DIST(s) : NIL;
+
+        mov eax, [rcx + dsWSize]
+        sub eax, MIN_LOOKAHEAD
+        xor edi,edi
+        sub ebp, eax
+
+        mov r11d, [rcx + dsPrevLen]
+
+        cmovng ebp,edi
+
+;;; int best_len = s->prev_length;
+
+
+;;; Store the sum of s->window + best_len in esi locally, and in esi.
+
+       lea  rsi,[r10+r11]
+
+;;; register ush scan_start = *(ushf*)scan;
+;;; register ush scan_end   = *(ushf*)(scan+best_len-1);
+;;; Posf *prev = s->prev;
+
+        movzx r12d,word ptr [r9]
+        movzx   ebx, word ptr [r9 + r11 - 1]
+        mov rdi, [rcx + dsPrev]
+
+;;; Jump into the main loop.
+
+        mov edx, [chainlenwmask]
+
+        cmp bx,word ptr [rsi + r8 - 1]
+        jz  LookupLoopIsZero
+
+LookupLoop1:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+
+LoopEntry1:
+        cmp bx,word ptr [rsi + r8 - 1]
+        jz  LookupLoopIsZero
+
+LookupLoop2:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+
+LoopEntry2:
+        cmp bx,word ptr [rsi + r8 - 1]
+        jz  LookupLoopIsZero
+
+LookupLoop4:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+
+LoopEntry4:
+
+        cmp bx,word ptr [rsi + r8 - 1]
+        jnz LookupLoop1
+        jmp LookupLoopIsZero
+
+
+;;; do {
+;;;     match = s->window + cur_match;
+;;;     if (*(ushf*)(match+best_len-1) != scan_end ||
+;;;         *(ushf*)match != scan_start) continue;
+;;;     [...]
+;;; } while ((cur_match = prev[cur_match & wmask]) > limit
+;;;          && --chain_length != 0);
+;;;
+;;; Here is the inner loop of the function. The function will spend the
+;;; majority of its time in this loop, and majority of that time will
+;;; be spent in the first ten instructions.
+;;;
+;;; Within this loop:
+;;; ebx = scanend
+;;; r8d = curmatch
+;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
+;;; esi = windowbestlen - i.e., (window + bestlen)
+;;; edi = prev
+;;; ebp = limit
+
+LookupLoop:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+
+LoopEntry:
+
+        cmp bx,word ptr [rsi + r8 - 1]
+        jnz LookupLoop1
+LookupLoopIsZero:
+        cmp     r12w, word ptr [r10 + r8]
+        jnz LookupLoop1
+
+
+;;; Store the current value of chainlen.
+        mov [chainlenwmask], edx
+
+;;; Point edi to the string under scrutiny, and esi to the string we
+;;; are hoping to match it up with. In actuality, esi and edi are
+;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is
+;;; initialized to -(MAX_MATCH_8 - scanalign).
+
+        lea rsi,[r8+r10]
+        mov rdx, 0fffffffffffffef8h; -(MAX_MATCH_8)
+        lea rsi, [rsi + r13 + 0108h] ;MAX_MATCH_8]
+        lea rdi, [r9 + r13 + 0108h] ;MAX_MATCH_8]
+
+        prefetcht1 [rsi+rdx]
+        prefetcht1 [rdi+rdx]
+;;; Test the strings for equality, 8 bytes at a time. At the end,
+;;; adjust edx so that it is offset to the exact byte that mismatched.
+;;;
+;;; We already know at this point that the first three bytes of the
+;;; strings match each other, and they can be safely passed over before
+;;; starting the compare loop. So what this code does is skip over 0-3
+;;; bytes, as much as necessary in order to dword-align the edi
+;;; pointer. (esi will still be misaligned three times out of four.)
+;;;
+;;; It should be confessed that this loop usually does not represent
+;;; much of the total running time. Replacing it with a more
+;;; straightforward "rep cmpsb" would not drastically degrade
+;;; performance.
+
+;LoopCmps:
+;        mov eax, [rsi + rdx]
+;        xor eax, [rdi + rdx]
+;        jnz LeaveLoopCmps
+;        mov eax, [rsi + rdx + 4]
+;        xor eax, [rdi + rdx + 4]
+;        jnz LeaveLoopCmps4
+;        add rdx, 8
+;        jnz LoopCmps
+;        jmp LenMaximum
+;LeaveLoopCmps4: add rdx, 4
+;LeaveLoopCmps:  test    eax, 0000FFFFh
+;        jnz LenLower
+;        add rdx,  2
+;        shr eax, 16
+;LenLower:   sub al, 1
+;        adc rdx, 0
+
+
+LoopCmps:
+        mov rax, [rsi + rdx]
+        xor rax, [rdi + rdx]
+        jnz LeaveLoopCmps
+
+        mov rax, [rsi + rdx + 8]
+        xor rax, [rdi + rdx + 8]
+        jnz LeaveLoopCmps8
+
+
+        mov rax, [rsi + rdx + 8+8]
+        xor rax, [rdi + rdx + 8+8]
+        jnz LeaveLoopCmps16
+
+        add rdx,8+8+8
+
+        jmp short LoopCmps
+LeaveLoopCmps16: add rdx,8
+LeaveLoopCmps8: add rdx,8
+LeaveLoopCmps:
+
+        test    eax, 0000FFFFh
+        jnz LenLower
+
+        test eax,0ffffffffh
+
+        jnz LenLower32
+
+        add rdx,4
+        shr rax,32
+        or ax,ax
+        jnz LenLower
+
+LenLower32:
+        shr eax,16
+        add rdx,2
+LenLower:   sub al, 1
+        adc rdx, 0
+;;; Calculate the length of the match. If it is longer than MAX_MATCH,
+;;; then automatically accept it as the best possible match and leave.
+
+        lea rax, [rdi + rdx]
+        sub rax, r9
+        cmp eax, MAX_MATCH
+        jge LenMaximum
+
+;;; If the length of the match is not longer than the best match we
+;;; have so far, then forget it and return to the lookup loop.
+;///////////////////////////////////
+
+        cmp eax, r11d
+        jg  LongerMatch
+
+        lea rsi,[r10+r11]
+
+        mov rdi, [rcx + dsPrev]
+        mov edx, [chainlenwmask]
+        jmp LookupLoop
+
+;;;         s->match_start = cur_match;
+;;;         best_len = len;
+;;;         if (len >= nice_match) break;
+;;;         scan_end = *(ushf*)(scan+best_len-1);
+
+LongerMatch:
+        mov r11d, eax
+        mov [rcx + dsMatchStart], r8d
+        cmp eax, [nicematch]
+        jge LeaveNow
+
+        lea rsi,[r10+rax]
+
+        movzx   ebx, word ptr [r9 + rax - 1]
+        mov rdi, [rcx + dsPrev]
+        mov edx, [chainlenwmask]
+        jmp LookupLoop
+
+;;; Accept the current string, with the maximum possible length.
+
+LenMaximum:
+        mov r11d,MAX_MATCH
+        mov [rcx + dsMatchStart], r8d
+
+;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+;;; return s->lookahead;
+
+LeaveNow:
+        mov eax, [rcx + dsLookahead]
+        cmp r11d, eax
+        cmovng eax, r11d
+
+
+;;; Restore the stack and return from whence we came.
+
+
+        mov rsi,[save_rsi]
+        mov rdi,[save_rdi]
+        mov rbx,[save_rbx]
+        mov rbp,[save_rbp]
+        mov r12,[save_r12]
+        mov r13,[save_r13]
+;        mov r14,[save_r14]
+;        mov r15,[save_r15]
+
+
+        ret 0
+; please don't remove this string !
+; Your can freely use gvmat32 in any free or commercial app if you don't remove the string in the binary!
+    db     0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998, converted to amd 64 by Gilles Vollant 2005",0dh,0ah,0
+longest_match   ENDP
+
+match_init PROC
+  ret 0
+match_init ENDP
+
+
+END

contrib/masmx64/inffas8664.c

@@ -0,0 +1,186 @@
+/* inffas8664.c is a hand tuned assembler version of inffast.c - fast decoding
+ * version for AMD64 on Windows using Microsoft C compiler
+ *
+ * Copyright (C) 1995-2003 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Copyright (C) 2003 Chris Anderson <christop@charm.net>
+ * Please use the copyright conditions above.
+ *
+ * 2005 - Adaptation to Microsoft C Compiler for AMD64 by Gilles Vollant
+ *
+ * inffas8664.c call function inffas8664fnc in inffasx64.asm
+ *  inffasx64.asm is automatically convert from AMD64 portion of inffas86.c
+ *
+ * Dec-29-2003 -- I added AMD64 inflate asm support.  This version is also
+ * slightly quicker on x86 systems because, instead of using rep movsb to copy
+ * data, it uses rep movsw, which moves data in 2-byte chunks instead of single
+ * bytes.  I've tested the AMD64 code on a Fedora Core 1 + the x86_64 updates
+ * from http://fedora.linux.duke.edu/fc1_x86_64
+ * which is running on an Athlon 64 3000+ / Gigabyte GA-K8VT800M system with
+ * 1GB ram.  The 64-bit version is about 4% faster than the 32-bit version,
+ * when decompressing mozilla-source-1.3.tar.gz.
+ *
+ * Mar-13-2003 -- Most of this is derived from inffast.S which is derived from
+ * the gcc -S output of zlib-1.2.0/inffast.c.  Zlib-1.2.0 is in beta release at
+ * the moment.  I have successfully compiled and tested this code with gcc2.96,
+ * gcc3.2, icc5.0, msvc6.0.  It is very close to the speed of inffast.S
+ * compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX
+ * enabled.  I will attempt to merge the MMX code into this version.  Newer
+ * versions of this and inffast.S can be found at
+ * http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/
+ *
+ */
+
+#include <stdio.h>
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+/* Mark Adler's comments from inffast.c: */
+
+/*
+   Decode literal, length, and distance codes and write out the resulting
+   literal and match bytes until either not enough input or output is
+   available, an end-of-block is encountered, or a data error is encountered.
+   When large enough input and output buffers are supplied to inflate(), for
+   example, a 16K input buffer and a 64K output buffer, more than 95% of the
+   inflate execution time is spent in this routine.
+
+   Entry assumptions:
+
+        state->mode == LEN
+        strm->avail_in >= 6
+        strm->avail_out >= 258
+        start >= strm->avail_out
+        state->bits < 8
+
+   On return, state->mode is one of:
+
+        LEN -- ran out of enough output space or enough available input
+        TYPE -- reached end of block code, inflate() to interpret next block
+        BAD -- error in block data
+
+   Notes:
+
+    - The maximum input bits used by a length/distance pair is 15 bits for the
+      length code, 5 bits for the length extra, 15 bits for the distance code,
+      and 13 bits for the distance extra.  This totals 48 bits, or six bytes.
+      Therefore if strm->avail_in >= 6, then there is enough input to avoid
+      checking for available input while decoding.
+
+    - The maximum bytes that a single length/distance pair can output is 258
+      bytes, which is the maximum length that can be coded.  inflate_fast()
+      requires strm->avail_out >= 258 for each loop to avoid checking for
+      output space.
+ */
+
+
+
+    typedef struct inffast_ar {
+/* 64   32                               x86  x86_64 */
+/* ar offset                              register */
+/*  0    0 */ void *esp;                /* esp save */
+/*  8    4 */ void *ebp;                /* ebp save */
+/* 16    8 */ unsigned char FAR *in;    /* esi rsi  local strm->next_in */
+/* 24   12 */ unsigned char FAR *last;  /*     r9   while in < last */
+/* 32   16 */ unsigned char FAR *out;   /* edi rdi  local strm->next_out */
+/* 40   20 */ unsigned char FAR *beg;   /*          inflate()'s init next_out */
+/* 48   24 */ unsigned char FAR *end;   /*     r10  while out < end */
+/* 56   28 */ unsigned char FAR *window;/*          size of window, wsize!=0 */
+/* 64   32 */ code const FAR *lcode;    /* ebp rbp  local strm->lencode */
+/* 72   36 */ code const FAR *dcode;    /*     r11  local strm->distcode */
+/* 80   40 */ size_t /*unsigned long */hold;       /* edx rdx  local strm->hold */
+/* 88   44 */ unsigned bits;            /* ebx rbx  local strm->bits */
+/* 92   48 */ unsigned wsize;           /*          window size */
+/* 96   52 */ unsigned write;           /*          window write index */
+/*100   56 */ unsigned lmask;           /*     r12  mask for lcode */
+/*104   60 */ unsigned dmask;           /*     r13  mask for dcode */
+/*108   64 */ unsigned len;             /*     r14  match length */
+/*112   68 */ unsigned dist;            /*     r15  match distance */
+/*116   72 */ unsigned status;          /*          set when state chng*/
+    } type_ar;
+#ifdef ASMINF
+
+void inflate_fast(strm, start)
+z_streamp strm;
+unsigned start;         /* inflate()'s starting value for strm->avail_out */
+{
+    struct inflate_state FAR *state;
+    type_ar ar;
+    void inffas8664fnc(struct inffast_ar * par);
+
+    
+
+#if (defined( __GNUC__ ) && defined( __amd64__ ) && ! defined( __i386 )) || (defined(_MSC_VER) && defined(_M_AMD64))
+#define PAD_AVAIL_IN 6
+#define PAD_AVAIL_OUT 258    
+#else
+#define PAD_AVAIL_IN 5
+#define PAD_AVAIL_OUT 257
+#endif
+
+    /* copy state to local variables */
+    state = (struct inflate_state FAR *)strm->state;
+
+    ar.in = strm->next_in;
+    ar.last = ar.in + (strm->avail_in - PAD_AVAIL_IN);
+    ar.out = strm->next_out;
+    ar.beg = ar.out - (start - strm->avail_out);
+    ar.end = ar.out + (strm->avail_out - PAD_AVAIL_OUT);
+    ar.wsize = state->wsize;
+    ar.write = state->write;
+    ar.window = state->window;
+    ar.hold = state->hold;
+    ar.bits = state->bits;
+    ar.lcode = state->lencode;
+    ar.dcode = state->distcode;
+    ar.lmask = (1U << state->lenbits) - 1;
+    ar.dmask = (1U << state->distbits) - 1;
+
+    /* decode literals and length/distances until end-of-block or not enough
+       input data or output space */
+
+    /* align in on 1/2 hold size boundary */
+    while (((size_t)(void *)ar.in & (sizeof(ar.hold) / 2 - 1)) != 0) {
+        ar.hold += (unsigned long)*ar.in++ << ar.bits;
+        ar.bits += 8;
+    }
+
+    inffas8664fnc(&ar);
+
+    if (ar.status > 1) {
+        if (ar.status == 2)
+            strm->msg = "invalid literal/length code";
+        else if (ar.status == 3)
+            strm->msg = "invalid distance code";
+        else
+            strm->msg = "invalid distance too far back";
+        state->mode = BAD;
+    }
+    else if ( ar.status == 1 ) {
+        state->mode = TYPE;
+    }
+
+    /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
+    ar.len = ar.bits >> 3;
+    ar.in -= ar.len;
+    ar.bits -= ar.len << 3;
+    ar.hold &= (1U << ar.bits) - 1;
+
+    /* update state and return */
+    strm->next_in = ar.in;
+    strm->next_out = ar.out;
+    strm->avail_in = (unsigned)(ar.in < ar.last ?
+                                PAD_AVAIL_IN + (ar.last - ar.in) :
+                                PAD_AVAIL_IN - (ar.in - ar.last));
+    strm->avail_out = (unsigned)(ar.out < ar.end ?
+                                 PAD_AVAIL_OUT + (ar.end - ar.out) :
+                                 PAD_AVAIL_OUT - (ar.out - ar.end));
+    state->hold = (unsigned long)ar.hold;
+    state->bits = ar.bits;
+    return;
+}
+
+#endif

contrib/masmx64/inffasx64.asm

@@ -0,0 +1,392 @@
+; inffasx64.asm is a hand tuned assembler version of inffast.c - fast decoding
+; version for AMD64 on Windows using Microsoft C compiler
+;
+; inffasx64.asm is automatically convert from AMD64 portion of inffas86.c
+; inffasx64.asm is called by inffas8664.c, which contain more info.
+
+
+; to compile this file, I use option
+;   ml64.exe /Flinffasx64 /c /Zi inffasx64.asm
+;   with Microsoft Macro Assembler (x64) for AMD64
+;
+;   ml64.exe is given with Visual Studio 2005, Windows 2003 server DDK
+;
+;   (you can get Windows 2003 server DDK with ml64 and cl.exe for AMD64 from 
+;      http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price)
+;
+
+.code
+inffas8664fnc PROC
+
+; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and
+; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp
+;
+; All registers must be preserved across the call, except for
+;   rax, rcx, rdx, r8, r-9, r10, and r11, which are scratch.
+
+
+	mov [rsp-8],rsi
+	mov [rsp-16],rdi
+	mov [rsp-24],r12
+	mov [rsp-32],r13
+	mov [rsp-40],r14
+	mov [rsp-48],r15
+	mov [rsp-56],rbx
+
+	mov rax,rcx
+
+	mov	[rax+8], rbp       ; /* save regs rbp and rsp */
+	mov	[rax], rsp
+
+	mov	rsp, rax          ; /* make rsp point to &ar */
+
+	mov	rsi, [rsp+16]      ; /* rsi  = in */
+	mov	rdi, [rsp+32]      ; /* rdi  = out */
+	mov	r9, [rsp+24]       ; /* r9   = last */
+	mov	r10, [rsp+48]      ; /* r10  = end */
+	mov	rbp, [rsp+64]      ; /* rbp  = lcode */
+	mov	r11, [rsp+72]      ; /* r11  = dcode */
+	mov	rdx, [rsp+80]      ; /* rdx  = hold */
+	mov	ebx, [rsp+88]      ; /* ebx  = bits */
+	mov	r12d, [rsp+100]    ; /* r12d = lmask */
+	mov	r13d, [rsp+104]    ; /* r13d = dmask */
+                                          ; /* r14d = len */
+                                          ; /* r15d = dist */
+
+
+	cld
+	cmp	r10, rdi
+	je	L_one_time           ; /* if only one decode left */
+	cmp	r9, rsi
+
+    jne L_do_loop
+
+
+L_one_time:
+	mov	r8, r12           ; /* r8 = lmask */
+	cmp	bl, 32
+	ja	L_get_length_code_one_time
+
+	lodsd                         ; /* eax = *(uint *)in++ */
+	mov	cl, bl            ; /* cl = bits, needs it for shifting */
+	add	bl, 32             ; /* bits += 32 */
+	shl	rax, cl
+	or	rdx, rax          ; /* hold |= *((uint *)in)++ << bits */
+	jmp	L_get_length_code_one_time
+
+ALIGN 4
+L_while_test:
+	cmp	r10, rdi
+	jbe	L_break_loop
+	cmp	r9, rsi
+	jbe	L_break_loop
+
+L_do_loop:
+	mov	r8, r12           ; /* r8 = lmask */
+	cmp	bl, 32
+	ja	L_get_length_code    ; /* if (32 < bits) */
+
+	lodsd                         ; /* eax = *(uint *)in++ */
+	mov	cl, bl            ; /* cl = bits, needs it for shifting */
+	add	bl, 32             ; /* bits += 32 */
+	shl	rax, cl
+	or	rdx, rax          ; /* hold |= *((uint *)in)++ << bits */
+
+L_get_length_code:
+	and	r8, rdx            ; /* r8 &= hold */
+	mov	eax, [rbp+r8*4]  ; /* eax = lcode[hold & lmask] */
+
+	mov	cl, ah            ; /* cl = this.bits */
+	sub	bl, ah            ; /* bits -= this.bits */
+	shr	rdx, cl           ; /* hold >>= this.bits */
+
+	test	al, al
+	jnz	L_test_for_length_base ; /* if (op != 0) 45.7% */
+
+	mov	r8, r12            ; /* r8 = lmask */
+	shr	eax, 16            ; /* output this.val char */
+	stosb
+
+L_get_length_code_one_time:
+	and	r8, rdx            ; /* r8 &= hold */
+	mov	eax, [rbp+r8*4] ; /* eax = lcode[hold & lmask] */
+
+L_dolen:
+	mov	cl, ah            ; /* cl = this.bits */
+	sub	bl, ah            ; /* bits -= this.bits */
+	shr	rdx, cl           ; /* hold >>= this.bits */
+
+	test	al, al
+	jnz	L_test_for_length_base ; /* if (op != 0) 45.7% */
+
+	shr	eax, 16            ; /* output this.val char */
+	stosb
+	jmp	L_while_test
+
+ALIGN 4
+L_test_for_length_base:
+	mov	r14d, eax         ; /* len = this */
+	shr	r14d, 16           ; /* len = this.val */
+	mov	cl, al
+
+	test	al, 16
+	jz	L_test_for_second_level_length ; /* if ((op & 16) == 0) 8% */
+	and	cl, 15             ; /* op &= 15 */
+	jz	L_decode_distance    ; /* if (!op) */
+
+L_add_bits_to_len:
+	sub	bl, cl
+	xor	eax, eax
+	inc	eax
+	shl	eax, cl
+	dec	eax
+	and	eax, edx          ; /* eax &= hold */
+	shr	rdx, cl
+	add	r14d, eax         ; /* len += hold & mask[op] */
+
+L_decode_distance:
+	mov	r8, r13           ; /* r8 = dmask */
+	cmp	bl, 32
+	ja	L_get_distance_code  ; /* if (32 < bits) */
+
+	lodsd                         ; /* eax = *(uint *)in++ */
+	mov	cl, bl            ; /* cl = bits, needs it for shifting */
+	add	bl, 32             ; /* bits += 32 */
+	shl	rax, cl
+	or	rdx, rax          ; /* hold |= *((uint *)in)++ << bits */
+
+L_get_distance_code:
+	and	r8, rdx           ; /* r8 &= hold */
+	mov	eax, [r11+r8*4] ; /* eax = dcode[hold & dmask] */
+
+L_dodist:
+	mov	r15d, eax         ; /* dist = this */
+	shr	r15d, 16           ; /* dist = this.val */
+	mov	cl, ah
+	sub	bl, ah            ; /* bits -= this.bits */
+	shr	rdx, cl           ; /* hold >>= this.bits */
+	mov	cl, al            ; /* cl = this.op */
+
+	test	al, 16             ; /* if ((op & 16) == 0) */
+	jz	L_test_for_second_level_dist
+	and	cl, 15             ; /* op &= 15 */
+	jz	L_check_dist_one
+
+L_add_bits_to_dist:
+	sub	bl, cl
+	xor	eax, eax
+	inc	eax
+	shl	eax, cl
+	dec	eax                 ; /* (1 << op) - 1 */
+	and	eax, edx          ; /* eax &= hold */
+	shr	rdx, cl
+	add	r15d, eax         ; /* dist += hold & ((1 << op) - 1) */
+
+L_check_window:
+	mov	r8, rsi           ; /* save in so from can use it's reg */
+	mov	rax, rdi
+	sub	rax, [rsp+40]      ; /* nbytes = out - beg */
+
+	cmp	eax, r15d
+	jb	L_clip_window        ; /* if (dist > nbytes) 4.2% */
+
+	mov	ecx, r14d         ; /* ecx = len */
+	mov	rsi, rdi
+	sub	rsi, r15          ; /* from = out - dist */
+
+	sar	ecx, 1
+	jnc	L_copy_two           ; /* if len % 2 == 0 */
+
+	rep     movsw
+	mov	al, [rsi]
+	mov	[rdi], al
+	inc	rdi
+
+	mov	rsi, r8           ; /* move in back to %rsi, toss from */
+	jmp	L_while_test
+
+L_copy_two:
+	rep     movsw
+	mov	rsi, r8           ; /* move in back to %rsi, toss from */
+	jmp	L_while_test
+
+ALIGN 4
+L_check_dist_one:
+	cmp	r15d, 1            ; /* if dist 1, is a memset */
+	jne	L_check_window
+	cmp	[rsp+40], rdi      ; /* if out == beg, outside window */
+	je	L_check_window
+
+	mov	ecx, r14d         ; /* ecx = len */
+	mov	al, [rdi-1]
+	mov	ah, al
+
+	sar	ecx, 1
+	jnc	L_set_two
+	mov	[rdi], al
+	inc	rdi
+
+L_set_two:
+	rep     stosw
+	jmp	L_while_test
+
+ALIGN 4
+L_test_for_second_level_length:
+	test	al, 64
+	jnz	L_test_for_end_of_block ; /* if ((op & 64) != 0) */
+
+	xor	eax, eax
+	inc	eax
+	shl	eax, cl
+	dec	eax
+	and	eax, edx         ; /* eax &= hold */
+	add	eax, r14d        ; /* eax += len */
+	mov	eax, [rbp+rax*4] ; /* eax = lcode[val+(hold&mask[op])]*/
+	jmp	L_dolen
+
+ALIGN 4
+L_test_for_second_level_dist:
+	test	al, 64
+	jnz	L_invalid_distance_code ; /* if ((op & 64) != 0) */
+
+	xor	eax, eax
+	inc	eax
+	shl	eax, cl
+	dec	eax
+	and	eax, edx         ; /* eax &= hold */
+	add	eax, r15d        ; /* eax += dist */
+	mov	eax, [r11+rax*4] ; /* eax = dcode[val+(hold&mask[op])]*/
+	jmp	L_dodist
+
+ALIGN 4
+L_clip_window:
+	mov	ecx, eax         ; /* ecx = nbytes */
+	mov	eax, [rsp+92]     ; /* eax = wsize, prepare for dist cmp */
+	neg	ecx                ; /* nbytes = -nbytes */
+
+	cmp	eax, r15d
+	jb	L_invalid_distance_too_far ; /* if (dist > wsize) */
+
+	add	ecx, r15d         ; /* nbytes = dist - nbytes */
+	cmp	dword ptr [rsp+96], 0
+	jne	L_wrap_around_window ; /* if (write != 0) */
+
+	mov	rsi, [rsp+56]     ; /* from  = window */
+	sub	eax, ecx         ; /* eax  -= nbytes */
+	add	rsi, rax         ; /* from += wsize - nbytes */
+
+	mov	eax, r14d        ; /* eax = len */
+	cmp	r14d, ecx
+	jbe	L_do_copy           ; /* if (nbytes >= len) */
+
+	sub	eax, ecx         ; /* eax -= nbytes */
+	rep     movsb
+	mov	rsi, rdi
+	sub	rsi, r15         ; /* from = &out[ -dist ] */
+	jmp	L_do_copy
+
+ALIGN 4
+L_wrap_around_window:
+	mov	eax, [rsp+96]     ; /* eax = write */
+	cmp	ecx, eax
+	jbe	L_contiguous_in_window ; /* if (write >= nbytes) */
+
+	mov	esi, [rsp+92]     ; /* from  = wsize */
+	add	rsi, [rsp+56]     ; /* from += window */
+	add	rsi, rax         ; /* from += write */
+	sub	rsi, rcx         ; /* from -= nbytes */
+	sub	ecx, eax         ; /* nbytes -= write */
+
+	mov	eax, r14d        ; /* eax = len */
+	cmp	eax, ecx
+	jbe	L_do_copy           ; /* if (nbytes >= len) */
+
+	sub	eax, ecx         ; /* len -= nbytes */
+	rep     movsb
+	mov	rsi, [rsp+56]     ; /* from = window */
+	mov	ecx, [rsp+96]     ; /* nbytes = write */
+	cmp	eax, ecx
+	jbe	L_do_copy           ; /* if (nbytes >= len) */
+
+	sub	eax, ecx         ; /* len -= nbytes */
+	rep     movsb
+	mov	rsi, rdi
+	sub	rsi, r15         ; /* from = out - dist */
+	jmp	L_do_copy
+
+ALIGN 4
+L_contiguous_in_window:
+	mov	rsi, [rsp+56]     ; /* rsi = window */
+	add	rsi, rax
+	sub	rsi, rcx         ; /* from += write - nbytes */
+
+	mov	eax, r14d        ; /* eax = len */
+	cmp	eax, ecx
+	jbe	L_do_copy           ; /* if (nbytes >= len) */
+
+	sub	eax, ecx         ; /* len -= nbytes */
+	rep     movsb
+	mov	rsi, rdi
+	sub	rsi, r15         ; /* from = out - dist */
+	jmp	L_do_copy           ; /* if (nbytes >= len) */
+
+ALIGN 4
+L_do_copy:
+	mov	ecx, eax         ; /* ecx = len */
+	rep     movsb
+
+	mov	rsi, r8          ; /* move in back to %esi, toss from */
+	jmp	L_while_test
+
+L_test_for_end_of_block:
+	test	al, 32
+	jz	L_invalid_literal_length_code
+	mov	dword ptr [rsp+116], 1
+	jmp	L_break_loop_with_status
+
+L_invalid_literal_length_code:
+	mov	dword ptr [rsp+116], 2
+	jmp	L_break_loop_with_status
+
+L_invalid_distance_code:
+	mov	dword ptr [rsp+116], 3
+	jmp	L_break_loop_with_status
+
+L_invalid_distance_too_far:
+	mov	dword ptr [rsp+116], 4
+	jmp	L_break_loop_with_status
+
+L_break_loop:
+	mov	dword ptr [rsp+116], 0
+
+L_break_loop_with_status:
+; /* put in, out, bits, and hold back into ar and pop esp */
+	mov	[rsp+16], rsi     ; /* in */
+	mov	[rsp+32], rdi     ; /* out */
+	mov	[rsp+88], ebx     ; /* bits */
+	mov	[rsp+80], rdx     ; /* hold */
+
+	mov	rax, [rsp]       ; /* restore rbp and rsp */
+	mov	rbp, [rsp+8]
+	mov	rsp, rax
+
+
+
+	mov rsi,[rsp-8]
+	mov rdi,[rsp-16]
+	mov r12,[rsp-24]
+	mov r13,[rsp-32]
+	mov r14,[rsp-40]
+	mov r15,[rsp-48]
+	mov rbx,[rsp-56]
+	
+    ret 0
+;          :
+;          : "m" (ar)
+;          : "memory", "%rax", "%rbx", "%rcx", "%rdx", "%rsi", "%rdi",
+;            "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "%r14", "%r15"
+;    );
+
+inffas8664fnc 	ENDP
+;_TEXT	ENDS
+END

contrib/masmx64/readme.txt

@@ -0,0 +1,28 @@
+Summary
+-------
+This directory contains ASM implementations of the functions
+longest_match() and inflate_fast(), for 64 bits x86 (both AMD64 and Intel EM64t),
+for use with Microsoft Macro Assembler (x64) for AMD64 and Microsoft C++ 64 bits.
+
+gvmat64.asm is written by Gilles Vollant (2005), by using Brian Raiter 686/32 bits
+   assembly optimized version from Jean-loup Gailly original longest_match function
+
+inffasx64.asm and inffas8664.c were written by Chris Anderson, by optimizing
+   original function from Mark Adler
+
+Use instructions
+----------------
+Copy these files into the zlib source directory.
+
+define ASMV and ASMINF in your project. Include inffas8664.c in your source tree,
+and inffasx64.obj and gvmat64.obj as object to link.
+
+
+Build instructions
+------------------
+run bld_64.bat with Microsoft Macro Assembler (x64) for AMD64 (ml64.exe)
+
+ml64.exe is given with Visual Studio 2005, Windows 2003 server DDK
+
+You can get Windows 2003 server DDK with ml64 and cl for AMD64 from 
+  http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price)

contrib/masmx86/bld_ml32.bat

@@ -0,0 +1,2 @@
+ml /coff /Zi /c /Flgvmat32.lst  gvmat32.asm 
+ml /coff /Zi /c /Flinffas32.lst inffas32.asm 

contrib/masmx86/gvmat32.asm

@@ -1,14 +1,52 @@
-;
 ; gvmat32.asm -- Asm portion of the optimized longest_match for 32 bits x86
 ; Copyright (C) 1995-1996 Jean-loup Gailly and Gilles Vollant.
 ; File written by Gilles Vollant, by modifiying the longest_match
 ;  from Jean-loup Gailly in deflate.c
-; It need wmask == 0x7fff
-;     (assembly code is faster with a fixed wmask)
 ;
-; For Visual C++ 4.2 and ML 6.11c (version in directory \MASM611C of Win95 DDK)
+;         http://www.zlib.net
-;   I compile with : "ml /coff /Zi /c gvmat32.asm"
+;         http://www.winimage.com/zLibDll
+;         http://www.muppetlabs.com/~breadbox/software/assembly.html
 ;
+; For Visual C++ 4.x and higher and ML 6.x and higher
+;   ml.exe is in directory \MASM611C of Win95 DDK
+;   ml.exe is also distributed in http://www.masm32.com/masmdl.htm
+;    and in VC++2003 toolkit at http://msdn.microsoft.com/visualc/vctoolkit2003/
+;
+; this file contain two implementation of longest_match
+;
+;  longest_match_7fff : written 1996 by Gilles Vollant optimized for 
+;            first Pentium. Assume s->w_mask == 0x7fff
+;  longest_match_686 : written by Brian raiter (1998), optimized for Pentium Pro
+;
+;  for using an seembly version of longest_match, you need define ASMV in project
+;  There is two way in using gvmat32.asm
+;
+;  A) Suggested method
+;    if you want include both longest_match_7fff and longest_match_686
+;    compile the asm file running
+;           ml /coff /Zi /Flgvmat32.lst /c gvmat32.asm
+;    and include gvmat32c.c in your project
+;    if you have an old cpu (386,486 or first Pentium) and s->w_mask==0x7fff,
+;        longest_match_7fff will be used
+;    if you have a more modern CPU (Pentium Pro, II and higher)
+;        longest_match_686 will be used
+;    on old cpu with s->w_mask!=0x7fff, longest_match_686 will be used,
+;        but this is not a sitation you'll find often
+;
+;  B) Alternative
+;    if you are not interresed in old cpu performance and want the smaller
+;       binaries possible
+;
+;    compile the asm file running
+;           ml /coff /Zi /c /Flgvmat32.lst /DNOOLDPENTIUMCODE gvmat32.asm
+;    and do not include gvmat32c.c in your project (ou define also 
+;              NOOLDPENTIUMCODE)
+;
+; note : as I known, longest_match_686 is very faster than longest_match_7fff
+;        on pentium Pro/II/III, faster (but less) in P4, but it seem
+;        longest_match_7fff can be faster (very very litte) on AMD Athlon64/K8
+;
+; see below : zlib1222add must be adjuster if you use a zlib version < 1.2.2.2
 
 ;uInt longest_match_7fff(s, cur_match)
 ;    deflate_state *s;
@@ -47,33 +85,48 @@
 
 
 
-;  all the +4 offsets are due to the addition of pending_buf_size (in zlib
+;  all the +zlib1222add offsets are due to the addition of fields
-;  in the deflate_state structure since the asm code was first written
+;  in zlib in the deflate_state structure since the asm code was first written
-;  (if you compile with zlib 1.0.4 or older, remove the +4).
+;  (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+;  (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+;  if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
+
+    zlib1222add         equ     8
+
 ;  Note : these value are good with a 8 bytes boundary pack structure
-    dep_chain_length    equ     70h+4
+    dep_chain_length    equ     74h+zlib1222add
-    dep_window          equ     2ch+4
+    dep_window          equ     30h+zlib1222add
-    dep_strstart        equ     60h+4
+    dep_strstart        equ     64h+zlib1222add
-    dep_prev_length     equ     6ch+4
+    dep_prev_length     equ     70h+zlib1222add
-    dep_nice_match      equ     84h+4
+    dep_nice_match      equ     88h+zlib1222add
-    dep_w_size          equ     20h+4
+    dep_w_size          equ     24h+zlib1222add
-    dep_prev            equ     34h+4
+    dep_prev            equ     38h+zlib1222add
-    dep_w_mask          equ     28h+4
+    dep_w_mask          equ     2ch+zlib1222add
-    dep_good_match      equ     80h+4
+    dep_good_match      equ     84h+zlib1222add
-    dep_match_start     equ     64h+4
+    dep_match_start     equ     68h+zlib1222add
-    dep_lookahead       equ     68h+4
+    dep_lookahead       equ     6ch+zlib1222add
 
 
 _TEXT                   segment
 
 IFDEF NOUNDERLINE
+   IFDEF NOOLDPENTIUMCODE
+            public  longest_match
+            public  match_init
+   ELSE            
             public  longest_match_7fff
+            public  cpudetect32
             public  longest_match_686
-;                        public  match_init
+   ENDIF
+ELSE
+   IFDEF NOOLDPENTIUMCODE
+            public  _longest_match
+            public  _match_init
    ELSE
             public  _longest_match_7fff
+            public  _cpudetect32
             public  _longest_match_686
-;                        public  _match_init
+   ENDIF
 ENDIF
 
     MAX_MATCH           equ     258
@@ -82,17 +135,7 @@ ENDIF
 
 
 
-IFDEF NOUNDERLINE
+IFNDEF NOOLDPENTIUMCODE
-;match_init      proc near
-;                ret
-;match_init      endp
-ELSE
-;_match_init     proc near
-;                ret
-;_match_init     endp
-ENDIF
-
-
 IFDEF NOUNDERLINE
 longest_match_7fff   proc near
 ELSE
@@ -558,9 +601,7 @@ cpudetect32     endp
 ELSE
 _cpudetect32    endp
 ENDIF
-
+ENDIF
-
-
 
 MAX_MATCH       equ     258
 MIN_MATCH       equ     3
@@ -597,19 +638,19 @@ curmatch	equ  esp + 60
 ;;; program to crash horribly, without so much as a warning at
 ;;; compile time. Sigh.)
 
-dsWSize		equ 36
+dsWSize     equ 36+zlib1222add
-dsWMask		equ 44
+dsWMask     equ 44+zlib1222add
-dsWindow	equ 48
+dsWindow    equ 48+zlib1222add
-dsPrev		equ 56
+dsPrev      equ 56+zlib1222add
-dsMatchLen	equ 88
+dsMatchLen  equ 88+zlib1222add
-dsPrevMatch	equ 92
+dsPrevMatch equ 92+zlib1222add
-dsStrStart	equ 100
+dsStrStart  equ 100+zlib1222add
-dsMatchStart	equ 104
+dsMatchStart    equ 104+zlib1222add
-dsLookahead	equ 108
+dsLookahead equ 108+zlib1222add
-dsPrevLen	equ 112
+dsPrevLen   equ 112+zlib1222add
-dsMaxChainLen	equ 116
+dsMaxChainLen   equ 116+zlib1222add
-dsGoodMatch	equ 132
+dsGoodMatch equ 132+zlib1222add
-dsNiceMatch	equ 136
+dsNiceMatch equ 136+zlib1222add
 
 
 ;;; match.asm -- Pentium-Pro-optimized version of longest_match()
@@ -628,12 +669,19 @@ dsNiceMatch	equ 136
 ;;; uInt longest_match(deflate_state *deflatestate, IPos curmatch)
 
 ;_longest_match:
+IFDEF NOOLDPENTIUMCODE
+    IFDEF NOUNDERLINE
+    longest_match       proc near
+    ELSE
+    _longest_match      proc near
+    ENDIF
+ELSE
     IFDEF NOUNDERLINE
     longest_match_686   proc near
     ELSE
     _longest_match_686  proc near
     ENDIF
-
+ENDIF
 
 ;;; Save registers that the compiler may be using, and adjust esp to
 ;;; make room for our stack frame.
@@ -895,11 +943,30 @@ LookaheadRet:
 ; Your can freely use gvmat32 in any free or commercial app if you don't remove the string in the binary!
     db     0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998",0dh,0ah
 
+
+IFDEF NOOLDPENTIUMCODE
+    IFDEF NOUNDERLINE
+    longest_match       endp
+    ELSE
+    _longest_match      endp
+    ENDIF
+
+    IFDEF NOUNDERLINE
+    match_init      proc near
+                    ret
+    match_init      endp
+    ELSE
+    _match_init     proc near
+                    ret
+    _match_init     endp
+    ENDIF    
+ELSE
     IFDEF NOUNDERLINE
     longest_match_686   endp
     ELSE
     _longest_match_686  endp
     ENDIF
+ENDIF
 
 _TEXT   ends
 end

contrib/masmx86/gvmat32c.c

@@ -6,16 +6,12 @@
  *  longest_match execute standard C code is wmask != 0x7fff
  *     (assembly code is faster with a fixed wmask)
  *
+ * Read comment at beginning of gvmat32.asm for more information
  */
 
+#if defined(ASMV) && (!defined(NOOLDPENTIUMCODE))
 #include "deflate.h"
 
-#ifdef ASMV
-#define NIL 0
-
-#define UNALIGNED_OK
-
-
 /* if your C compiler don't add underline before function name,
         define ADD_UNDERLINE_ASMFUNC */
 #ifdef ADD_UNDERLINE_ASMFUNC
@@ -25,11 +21,6 @@
 #endif
 
 
-
-void match_init()
-{
-}
-
 unsigned long cpudetect32();
 
 uInt longest_match_c(
@@ -45,162 +36,27 @@ uInt longest_match_686(
     deflate_state *s,
     IPos cur_match);                             /* current match */
 
+
+static uInt iIsPPro=2;
+
+void match_init ()
+{
+    iIsPPro = (((cpudetect32()/0x100)&0xf)>=6) ? 1 : 0;
+}
+
 uInt longest_match(
     deflate_state *s,
     IPos cur_match)                             /* current match */
 {
-    static uInt iIsPPro=2;
+    if (iIsPPro!=0)
-
-    if ((s->w_mask == 0x7fff) && (iIsPPro==0))
-        return longest_match_7fff(s,cur_match);
-
-    if (iIsPPro==1)
         return longest_match_686(s,cur_match);
 
-    if (iIsPPro==2)
+    if (s->w_mask != 0x7fff)
-        iIsPPro = (((cpudetect32()/0x100)&0xf)>=6) ? 1 : 0;
+        return longest_match_686(s,cur_match);
 
-    return longest_match_c(s,cur_match);
+    /* now ((s->w_mask == 0x7fff) && (iIsPPro==0)) */
+        return longest_match_7fff(s,cur_match);
 }
 
 
-
+#endif /* defined(ASMV) && (!defined(NOOLDPENTIUMCODE)) */
-uInt longest_match_c(s, cur_match)
-    deflate_state *s;
-    IPos cur_match;                             /* current match */
-{
-    unsigned chain_length = s->max_chain_length;/* max hash chain length */
-    register Bytef *scan = s->window + s->strstart; /* current string */
-    register Bytef *match;                       /* matched string */
-    register int len;                           /* length of current match */
-    int best_len = s->prev_length;              /* best match length so far */
-    int nice_match = s->nice_match;             /* stop if match long enough */
-    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
-        s->strstart - (IPos)MAX_DIST(s) : NIL;
-    /* Stop when cur_match becomes <= limit. To simplify the code,
-     * we prevent matches with the string of window index 0.
-     */
-    Posf *prev = s->prev;
-    uInt wmask = s->w_mask;
-
-#ifdef UNALIGNED_OK
-    /* Compare two bytes at a time. Note: this is not always beneficial.
-     * Try with and without -DUNALIGNED_OK to check.
-     */
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
-    register ush scan_start = *(ushf*)scan;
-    register ush scan_end   = *(ushf*)(scan+best_len-1);
-#else
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
-    register Byte scan_end1  = scan[best_len-1];
-    register Byte scan_end   = scan[best_len];
-#endif
-
-    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
-     * It is easy to get rid of this optimization if necessary.
-     */
-    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
-    /* Do not waste too much time if we already have a good match: */
-    if (s->prev_length >= s->good_match) {
-        chain_length >>= 2;
-    }
-    /* Do not look for matches beyond the end of the input. This is necessary
-     * to make deflate deterministic.
-     */
-    if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
-
-    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
-    do {
-        Assert(cur_match < s->strstart, "no future");
-        match = s->window + cur_match;
-
-        /* Skip to next match if the match length cannot increase
-         * or if the match length is less than 2:
-         */
-#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
-        /* This code assumes sizeof(unsigned short) == 2. Do not use
-         * UNALIGNED_OK if your compiler uses a different size.
-         */
-        if (*(ushf*)(match+best_len-1) != scan_end ||
-            *(ushf*)match != scan_start) continue;
-
-        /* It is not necessary to compare scan[2] and match[2] since they are
-         * always equal when the other bytes match, given that the hash keys
-         * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
-         * strstart+3, +5, ... up to strstart+257. We check for insufficient
-         * lookahead only every 4th comparison; the 128th check will be made
-         * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
-         * necessary to put more guard bytes at the end of the window, or
-         * to check more often for insufficient lookahead.
-         */
-        Assert(scan[2] == match[2], "scan[2]?");
-        scan++, match++;
-        do {
-        } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 scan < strend);
-        /* The funny "do {}" generates better code on most compilers */
-
-        /* Here, scan <= window+strstart+257 */
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-        if (*scan == *match) scan++;
-
-        len = (MAX_MATCH - 1) - (int)(strend-scan);
-        scan = strend - (MAX_MATCH-1);
-
-#else /* UNALIGNED_OK */
-
-        if (match[best_len]   != scan_end  ||
-            match[best_len-1] != scan_end1 ||
-            *match            != *scan     ||
-            *++match          != scan[1])      continue;
-
-        /* The check at best_len-1 can be removed because it will be made
-         * again later. (This heuristic is not always a win.)
-         * It is not necessary to compare scan[2] and match[2] since they
-         * are always equal when the other bytes match, given that
-         * the hash keys are equal and that HASH_BITS >= 8.
-         */
-        scan += 2, match++;
-        Assert(*scan == *match, "match[2]?");
-
-        /* We check for insufficient lookahead only every 8th comparison;
-         * the 256th check will be made at strstart+258.
-         */
-        do {
-        } while (*++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 scan < strend);
-
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
-        len = MAX_MATCH - (int)(strend - scan);
-        scan = strend - MAX_MATCH;
-
-#endif /* UNALIGNED_OK */
-
-        if (len > best_len) {
-            s->match_start = cur_match;
-            best_len = len;
-            if (len >= nice_match) break;
-#ifdef UNALIGNED_OK
-            scan_end = *(ushf*)(scan+best_len-1);
-#else
-            scan_end1  = scan[best_len-1];
-            scan_end   = scan[best_len];
-#endif
-        }
-    } while ((cur_match = prev[cur_match & wmask]) > limit
-             && --chain_length != 0);
-
-    if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
-    return s->lookahead;
-}
-
-#endif /* ASMV */

contrib/masmx86/inffas32.asm

@@ -1,3 +1,57 @@
+;/* inffas32.asm is a hand tuned assembler version of inffast.c -- fast decoding
+; *
+; * inffas32.asm is derivated from inffas86.c, with translation of assembly code
+; *
+; * Copyright (C) 1995-2003 Mark Adler
+; * For conditions of distribution and use, see copyright notice in zlib.h
+; *
+; * Copyright (C) 2003 Chris Anderson <christop@charm.net>
+; * Please use the copyright conditions above.
+; *
+; * Mar-13-2003 -- Most of this is derived from inffast.S which is derived from
+; * the gcc -S output of zlib-1.2.0/inffast.c.  Zlib-1.2.0 is in beta release at
+; * the moment.  I have successfully compiled and tested this code with gcc2.96,
+; * gcc3.2, icc5.0, msvc6.0.  It is very close to the speed of inffast.S
+; * compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX
+; * enabled.  I will attempt to merge the MMX code into this version.  Newer
+; * versions of this and inffast.S can be found at
+; * http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/
+; * 
+; * 2005 : modification by Gilles Vollant
+; */
+; For Visual C++ 4.x and higher and ML 6.x and higher
+;   ml.exe is in directory \MASM611C of Win95 DDK
+;   ml.exe is also distributed in http://www.masm32.com/masmdl.htm
+;    and in VC++2003 toolkit at http://msdn.microsoft.com/visualc/vctoolkit2003/
+;
+;
+;   compile with command line option
+;   ml  /coff /Zi /c /Flinffas32.lst inffas32.asm
+
+;   if you define NO_GZIP (see inflate.h), compile with
+;   ml  /coff /Zi /c /Flinffas32.lst /DNO_GUNZIP inffas32.asm
+
+
+; zlib122sup is 0 fort zlib 1.2.2.1 and lower
+; zlib122sup is 8 fort zlib 1.2.2.2 and more (with addition of dmax and head 
+;        in inflate_state in inflate.h)
+zlib1222sup      equ    8
+
+
+IFDEF GUNZIP
+  INFLATE_MODE_TYPE    equ 11
+  INFLATE_MODE_BAD     equ 26
+ELSE
+  IFNDEF NO_GUNZIP
+    INFLATE_MODE_TYPE    equ 11
+    INFLATE_MODE_BAD     equ 26
+  ELSE
+    INFLATE_MODE_TYPE    equ 3
+    INFLATE_MODE_BAD     equ 17
+  ENDIF
+ENDIF
+
+
 ; 75 "inffast.S"
 ;FILE "inffast.S"
 
@@ -84,17 +138,16 @@ dd	2147483647
 dd	4294967295
 
 
-
 mode_state	 equ	0	;/* state->mode	*/
-wsize_state	 equ	32	;/* state->wsize */
+wsize_state	 equ	(32+zlib1222sup)	;/* state->wsize */
-write_state	 equ	(36+4)	;/* state->write */
+write_state	 equ	(36+4+zlib1222sup)	;/* state->write */
-window_state	 equ	(40+4)	;/* state->window */
+window_state	 equ	(40+4+zlib1222sup)	;/* state->window */
-hold_state	 equ	(44+4)	;/* state->hold	*/
+hold_state	 equ	(44+4+zlib1222sup)	;/* state->hold	*/
-bits_state	 equ	(48+4)	;/* state->bits	*/
+bits_state	 equ	(48+4+zlib1222sup)	;/* state->bits	*/
-lencode_state	 equ	(64+4)	;/* state->lencode */
+lencode_state	 equ	(64+4+zlib1222sup)	;/* state->lencode */
-distcode_state	 equ	(68+4)	;/* state->distcode */
+distcode_state	 equ	(68+4+zlib1222sup)	;/* state->distcode */
-lenbits_state	 equ	(72+4)	;/* state->lenbits */
+lenbits_state	 equ	(72+4+zlib1222sup)	;/* state->lenbits */
-distbits_state	 equ	(76+4)	;/* state->distbits */
+distbits_state	 equ	(76+4+zlib1222sup)	;/* state->distbits */
 
 
 ;;SECTION .text
@@ -868,7 +921,7 @@ L_invalid_distance_code:
 
 
 	mov  ecx, invalid_distance_code_msg
-	mov  edx,26
+	mov  edx,INFLATE_MODE_BAD
 	jmp  L_update_stream_state
 
 L_test_for_end_of_block:
@@ -881,7 +934,7 @@ L_test_for_end_of_block:
 	jz  L_invalid_literal_length_code
 
 	mov  ecx,0
-	mov  edx,11
+	mov  edx,INFLATE_MODE_TYPE
 	jmp  L_update_stream_state
 
 L_invalid_literal_length_code:
@@ -891,7 +944,7 @@ L_invalid_literal_length_code:
 
 
 	mov  ecx, invalid_literal_length_code_msg
-	mov  edx,26
+	mov  edx,INFLATE_MODE_BAD
 	jmp  L_update_stream_state
 
 L_invalid_distance_too_far:
@@ -900,7 +953,7 @@ L_invalid_distance_too_far:
 
 	mov  esi, [esp+44]
 	mov  ecx, invalid_distance_too_far_msg
-	mov  edx,26
+	mov  edx,INFLATE_MODE_BAD
 	jmp  L_update_stream_state
 
 L_update_stream_state:
@@ -1026,8 +1079,5 @@ L_done:
 	pop  edi
 	ret
 
-
-
-
 _TEXT	ends
 end

contrib/masmx86/mkasm.bat

@@ -1,3 +1,3 @@
-cl /I..\.. /O2 /c gvmat32c.c
+cl /DASMV /I..\.. /O2 /c gvmat32c.c
 ml /coff /Zi /c /Flgvmat32.lst gvmat32.asm
 ml /coff /Zi /c /Flinffas32.lst inffas32.asm

contrib/minizip/ChangeLogUnzip

@@ -1,3 +1,15 @@
+Change in 1.01e (12 feb 05)
+- Fix in zipOpen2 for globalcomment (Rolf Kalbermatter)
+- Fix possible memory leak in unzip.c (Zoran Stevanovic)
+
+Change in 1.01b (20 may 04)
+- Integrate patch from Debian package (submited by Mark Brown)
+- Add tools mztools from Xavier Roche
+
+Change in 1.01 (8 may 04)
+- fix buffer overrun risk in unzip.c (Xavier Roche)
+- fix a minor buffer insecurity in minizip.c (Mike Whittaker)
+
 Change in 1.00: (10 sept 03)
 - rename to 1.00
 - cosmetic code change

contrib/minizip/crypt.h

@@ -1,9 +1,9 @@
 /* crypt.h -- base code for crypt/uncrypt ZIPfile
 
 
-   Version 1.00, September 10th, 2003
+   Version 1.01e, February 12th, 2005
 
-   Copyright (C) 1998-2003 Gilles Vollant
+   Copyright (C) 1998-2005 Gilles Vollant
 
    This code is a modified version of crypting code in Infozip distribution
 

contrib/minizip/ioapi.c

@@ -1,9 +1,9 @@
 /* ioapi.c -- IO base function header for compress/uncompress .zip
    files using zlib + zip or unzip API
 
-   Version 1.00, September 10th, 2003
+   Version 1.01e, February 12th, 2005
 
-   Copyright (C) 1998-2003 Gilles Vollant
+   Copyright (C) 1998-2005 Gilles Vollant
 */
 
 #include <stdio.h>
@@ -94,7 +94,7 @@ uLong ZCALLBACK fread_file_func (opaque, stream, buf, size)
    uLong size;
 {
     uLong ret;
-    ret = fread(buf, 1, (size_t)size, (FILE *)stream);
+    ret = (uLong)fread(buf, 1, (size_t)size, (FILE *)stream);
     return ret;
 }
 
@@ -106,7 +106,7 @@ uLong ZCALLBACK fwrite_file_func (opaque, stream, buf, size)
    uLong size;
 {
     uLong ret;
-    ret = fwrite(buf, 1, (size_t)size, (FILE *)stream);
+    ret = (uLong)fwrite(buf, 1, (size_t)size, (FILE *)stream);
     return ret;
 }
 

contrib/minizip/ioapi.h

@@ -1,9 +1,9 @@
 /* ioapi.h -- IO base function header for compress/uncompress .zip
    files using zlib + zip or unzip API
 
-   Version 1.00, September 10th, 2003
+   Version 1.01e, February 12th, 2005
 
-   Copyright (C) 1998-2003 Gilles Vollant
+   Copyright (C) 1998-2005 Gilles Vollant
 */
 
 #ifndef _ZLIBIOAPI_H

contrib/minizip/iowin32.c

@@ -2,9 +2,9 @@
    files using zlib + zip or unzip API
    This IO API version uses the Win32 API (for Microsoft Windows)
 
-   Version 1.00, September 10th, 2003
+   Version 1.01e, February 12th, 2005
 
-   Copyright (C) 1998-2003 Gilles Vollant
+   Copyright (C) 1998-2005 Gilles Vollant
 */
 
 #include <stdlib.h>

contrib/minizip/iowin32.h

@@ -2,9 +2,9 @@
    files using zlib + zip or unzip API
    This IO API version uses the Win32 API (for Microsoft Windows)
 
-   Version 1.00, September 10th, 2003
+   Version 1.01e, February 12th, 2005
 
-   Copyright (C) 1998-2003 Gilles Vollant
+   Copyright (C) 1998-2005 Gilles Vollant
 */
 
 #include <windows.h>

contrib/minizip/miniunz.c

@@ -1,3 +1,11 @@
+/*
+   miniunz.c
+   Version 1.01e, February 12th, 2005
+
+   Copyright (C) 1998-2005 Gilles Vollant
+*/
+
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -27,7 +35,7 @@
   mini unzip, demo of unzip package
 
   usage :
-  Usage : miniunz [-exvlo] file.zip [file_to_extract]
+  Usage : miniunz [-exvlo] file.zip [file_to_extract] [-d extractdir]
 
   list the file in the zipfile, and print the content of FILE_ID.ZIP or README.TXT
     if it exists
@@ -140,17 +148,18 @@ int makedir (newdir)
 
 void do_banner()
 {
-    printf("MiniUnz 1.00, demo of zLib + Unz package written by Gilles Vollant\n");
+    printf("MiniUnz 1.01b, demo of zLib + Unz package written by Gilles Vollant\n");
     printf("more info at http://www.winimage.com/zLibDll/unzip.html\n\n");
 }
 
 void do_help()
 {
-    printf("Usage : miniunz [-e] [-x] [-v] [-l] [-o] [-p password] file.zip [file_to_extr.]\n\n" \
+    printf("Usage : miniunz [-e] [-x] [-v] [-l] [-o] [-p password] file.zip [file_to_extr.] [-d extractdir]\n\n" \
            "  -e  Extract without pathname (junk paths)\n" \
            "  -x  Extract with pathname\n" \
            "  -v  list files\n" \
            "  -l  list files\n" \
+           "  -d  directory to extract into\n" \
            "  -o  overwrite files without prompting\n" \
            "  -p  extract crypted file using password\n\n");
 }
@@ -304,8 +313,14 @@ int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
                 do
                 {
                     char answer[128];
-                    printf("The file %s exist. Overwrite ? [y]es, [n]o, [A]ll: ",write_filename);
+                    int ret;
-                    scanf("%1s",answer);
+
+                    printf("The file %s exists. Overwrite ? [y]es, [n]o, [A]ll: ",write_filename);
+                    ret = scanf("%1s",answer);
+                    if (ret != 1) 
+                    {
+                       exit(EXIT_FAILURE);
+                    }
                     rep = answer[0] ;
                     if ((rep>='a') && (rep<='z'))
                         rep -= 0x20;
@@ -459,6 +474,8 @@ int main(argc,argv)
     int opt_do_extract=1;
     int opt_do_extract_withoutpath=0;
     int opt_overwrite=0;
+    int opt_extractdir=0;
+    const char *dirname=NULL;
     unzFile uf=NULL;
 
     do_banner();
@@ -488,6 +505,12 @@ int main(argc,argv)
                         opt_do_extract = opt_do_extract_withoutpath = 1;
                     if ((c=='o') || (c=='O'))
                         opt_overwrite=1;
+                    if ((c=='d') || (c=='D'))
+                    {
+                        opt_extractdir=1;
+                        dirname=argv[i+1];
+                    }
+
                     if (((c=='p') || (c=='P')) && (i+1<argc))
                     {
                         password=argv[i+1];
@@ -499,7 +522,7 @@ int main(argc,argv)
             {
                 if (zipfilename == NULL)
                     zipfilename = argv[i];
-                else if (filename_to_extract==NULL)
+                else if ((filename_to_extract==NULL) && (!opt_extractdir))
                         filename_to_extract = argv[i] ;
             }
         }
@@ -544,6 +567,12 @@ int main(argc,argv)
         return do_list(uf);
     else if (opt_do_extract==1)
     {
+        if (opt_extractdir && chdir(dirname)) 
+        {
+          printf("Error changing into %s, aborting\n", dirname);
+          exit(-1);
+        }
+
         if (filename_to_extract == NULL)
             return do_extract(uf,opt_do_extract_withoutpath,opt_overwrite,password);
         else

contrib/minizip/minizip.c

@@ -1,3 +1,10 @@
+/*
+   minizip.c
+   Version 1.01e, February 12th, 2005
+
+   Copyright (C) 1998-2005 Gilles Vollant
+*/
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -66,6 +73,8 @@ uLong filetime(f, tmzip, dt)
   {
     char name[MAXFILENAME+1];
     int len = strlen(f);
+    if (len > MAXFILENAME)
+      len = MAXFILENAME;
 
     strncpy(name, f,MAXFILENAME-1);
     /* strncpy doesnt append the trailing NULL, of the string is too long. */
@@ -120,7 +129,7 @@ int check_exist_file(filename)
 
 void do_banner()
 {
-    printf("MiniZip 1.00, demo of zLib + Zip package written by Gilles Vollant\n");
+    printf("MiniZip 1.01b, demo of zLib + Zip package written by Gilles Vollant\n");
     printf("more info at http://www.winimage.com/zLibDll/unzip.html\n\n");
 }
 
@@ -269,8 +278,13 @@ int main(argc,argv)
                 do
                 {
                     char answer[128];
-                    printf("The file %s exist. Overwrite ? [y]es, [n]o, [a]ppend : ",filename_try);
+                    int ret;
-                    scanf("%1s",answer);
+                    printf("The file %s exists. Overwrite ? [y]es, [n]o, [a]ppend : ",filename_try);
+                    ret = scanf("%1s",answer);
+                    if (ret != 1)
+                    {
+                       exit(EXIT_FAILURE);
+                    }
                     rep = answer[0] ;
                     if ((rep>='a') && (rep<='z'))
                         rep -= 0x20;
@@ -305,7 +319,12 @@ int main(argc,argv)
 
         for (i=zipfilenamearg+1;(i<argc) && (err==ZIP_OK);i++)
         {
-            if (((*(argv[i]))!='-') && ((*(argv[i]))!='/'))
+            if (!((((*(argv[i]))=='-') || ((*(argv[i]))=='/')) &&
+                  ((argv[i][1]=='o') || (argv[i][1]=='O') ||
+                   (argv[i][1]=='a') || (argv[i][1]=='A') ||
+                   (argv[i][1]=='p') || (argv[i][1]=='P') ||
+                   ((argv[i][1]>='0') || (argv[i][1]<='9'))) &&
+                  (strlen(argv[i]) == 2)))
             {
                 FILE * fin;
                 int size_read;
@@ -391,6 +410,10 @@ int main(argc,argv)
         if (errclose != ZIP_OK)
             printf("error in closing %s\n",filename_try);
     }
+    else
+    {
+       do_help();
+    }
 
     free(buf);
     return 0;

contrib/minizip/mztools.c

@@ -0,0 +1,281 @@
+/*
+  Additional tools for Minizip
+  Code: Xavier Roche '2004
+  License: Same as ZLIB (www.gzip.org)
+*/
+
+/* Code */
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "zlib.h"
+#include "unzip.h"
+
+#define READ_8(adr)  ((unsigned char)*(adr))
+#define READ_16(adr) ( READ_8(adr) | (READ_8(adr+1) << 8) )
+#define READ_32(adr) ( READ_16(adr) | (READ_16((adr)+2) << 16) )
+
+#define WRITE_8(buff, n) do { \
+  *((unsigned char*)(buff)) = (unsigned char) ((n) & 0xff); \
+} while(0)
+#define WRITE_16(buff, n) do { \
+  WRITE_8((unsigned char*)(buff), n); \
+  WRITE_8(((unsigned char*)(buff)) + 1, (n) >> 8); \
+} while(0)
+#define WRITE_32(buff, n) do { \
+  WRITE_16((unsigned char*)(buff), (n) & 0xffff); \
+  WRITE_16((unsigned char*)(buff) + 2, (n) >> 16); \
+} while(0)
+
+extern int ZEXPORT unzRepair(file, fileOut, fileOutTmp, nRecovered, bytesRecovered)
+const char* file;
+const char* fileOut;
+const char* fileOutTmp;
+uLong* nRecovered;
+uLong* bytesRecovered;
+{
+  int err = Z_OK;
+  FILE* fpZip = fopen(file, "rb");
+  FILE* fpOut = fopen(fileOut, "wb");
+  FILE* fpOutCD = fopen(fileOutTmp, "wb");
+  if (fpZip != NULL &&  fpOut != NULL) {
+    int entries = 0;
+    uLong totalBytes = 0;
+    char header[30];
+    char filename[256];
+    char extra[1024];
+    int offset = 0;
+    int offsetCD = 0;
+    while ( fread(header, 1, 30, fpZip) == 30 ) {
+      int currentOffset = offset;
+
+      /* File entry */
+      if (READ_32(header) == 0x04034b50) {
+        unsigned int version = READ_16(header + 4);
+        unsigned int gpflag = READ_16(header + 6);
+        unsigned int method = READ_16(header + 8);
+        unsigned int filetime = READ_16(header + 10);
+        unsigned int filedate = READ_16(header + 12);
+        unsigned int crc = READ_32(header + 14); /* crc */
+        unsigned int cpsize = READ_32(header + 18); /* compressed size */
+        unsigned int uncpsize = READ_32(header + 22); /* uncompressed sz */
+        unsigned int fnsize = READ_16(header + 26); /* file name length */
+        unsigned int extsize = READ_16(header + 28); /* extra field length */
+        filename[0] = extra[0] = '\0';
+        
+        /* Header */
+        if (fwrite(header, 1, 30, fpOut) == 30) {
+          offset += 30;
+        } else {
+          err = Z_ERRNO;
+          break;
+        }
+        
+        /* Filename */
+        if (fnsize > 0) {
+          if (fread(filename, 1, fnsize, fpZip) == fnsize) {
+            if (fwrite(filename, 1, fnsize, fpOut) == fnsize) {
+              offset += fnsize;
+            } else {
+              err = Z_ERRNO;
+              break;
+            }
+          } else {
+            err = Z_ERRNO;
+            break;
+          }
+        } else {
+          err = Z_STREAM_ERROR;
+          break;
+        }
+
+        /* Extra field */
+        if (extsize > 0) {
+          if (fread(extra, 1, extsize, fpZip) == extsize) {
+            if (fwrite(extra, 1, extsize, fpOut) == extsize) {
+              offset += extsize;
+            } else {
+              err = Z_ERRNO;
+              break;
+            }
+          } else {
+            err = Z_ERRNO;
+            break;
+          }
+        }
+        
+        /* Data */
+        {
+          int dataSize = cpsize;
+          if (dataSize == 0) {
+            dataSize = uncpsize;
+          }
+          if (dataSize > 0) {
+            char* data = malloc(dataSize);
+            if (data != NULL) {
+              if ((int)fread(data, 1, dataSize, fpZip) == dataSize) {
+                if ((int)fwrite(data, 1, dataSize, fpOut) == dataSize) {
+                  offset += dataSize;
+                  totalBytes += dataSize;
+                } else {
+                  err = Z_ERRNO;
+                }
+              } else {
+                err = Z_ERRNO;
+              }
+              free(data);
+              if (err != Z_OK) {
+                break;
+              }
+            } else {
+              err = Z_MEM_ERROR;
+              break;
+            }
+          }
+        }
+        
+        /* Central directory entry */
+        {
+          char header[46];
+          char* comment = "";
+          int comsize = (int) strlen(comment);
+          WRITE_32(header, 0x02014b50);
+          WRITE_16(header + 4, version);
+          WRITE_16(header + 6, version);
+          WRITE_16(header + 8, gpflag);
+          WRITE_16(header + 10, method);
+          WRITE_16(header + 12, filetime);
+          WRITE_16(header + 14, filedate);
+          WRITE_32(header + 16, crc);
+          WRITE_32(header + 20, cpsize);
+          WRITE_32(header + 24, uncpsize);
+          WRITE_16(header + 28, fnsize);
+          WRITE_16(header + 30, extsize);
+          WRITE_16(header + 32, comsize);
+          WRITE_16(header + 34, 0);     /* disk # */
+          WRITE_16(header + 36, 0);     /* int attrb */
+          WRITE_32(header + 38, 0);     /* ext attrb */
+          WRITE_32(header + 42, currentOffset);
+          /* Header */
+          if (fwrite(header, 1, 46, fpOutCD) == 46) {
+            offsetCD += 46;
+            
+            /* Filename */
+            if (fnsize > 0) {
+              if (fwrite(filename, 1, fnsize, fpOutCD) == fnsize) {
+                offsetCD += fnsize;
+              } else {
+                err = Z_ERRNO;
+                break;
+              }
+            } else {
+              err = Z_STREAM_ERROR;
+              break;
+            }
+            
+            /* Extra field */
+            if (extsize > 0) {
+              if (fwrite(extra, 1, extsize, fpOutCD) == extsize) {
+                offsetCD += extsize;
+              } else {
+                err = Z_ERRNO;
+                break;
+              }
+            }
+            
+            /* Comment field */
+            if (comsize > 0) {
+              if ((int)fwrite(comment, 1, comsize, fpOutCD) == comsize) {
+                offsetCD += comsize;
+              } else {
+                err = Z_ERRNO;
+                break;
+              }
+            }
+            
+            
+          } else {
+            err = Z_ERRNO;
+            break;
+          }
+        }
+
+        /* Success */
+        entries++;
+
+      } else {
+        break;
+      }
+    }
+
+    /* Final central directory  */
+    {
+      int entriesZip = entries;
+      char header[22];
+      char* comment = ""; // "ZIP File recovered by zlib/minizip/mztools";
+      int comsize = (int) strlen(comment);
+      if (entriesZip > 0xffff) {
+        entriesZip = 0xffff;
+      }
+      WRITE_32(header, 0x06054b50);
+      WRITE_16(header + 4, 0);    /* disk # */
+      WRITE_16(header + 6, 0);    /* disk # */
+      WRITE_16(header + 8, entriesZip);   /* hack */
+      WRITE_16(header + 10, entriesZip);  /* hack */
+      WRITE_32(header + 12, offsetCD);    /* size of CD */
+      WRITE_32(header + 16, offset);      /* offset to CD */
+      WRITE_16(header + 20, comsize);     /* comment */
+      
+      /* Header */
+      if (fwrite(header, 1, 22, fpOutCD) == 22) {
+        
+        /* Comment field */
+        if (comsize > 0) {
+          if ((int)fwrite(comment, 1, comsize, fpOutCD) != comsize) {
+            err = Z_ERRNO;
+          }
+        }
+        
+      } else {
+        err = Z_ERRNO;
+      }
+    }
+
+    /* Final merge (file + central directory) */
+    fclose(fpOutCD);
+    if (err == Z_OK) {
+      fpOutCD = fopen(fileOutTmp, "rb");
+      if (fpOutCD != NULL) {
+        int nRead;
+        char buffer[8192];
+        while ( (nRead = (int)fread(buffer, 1, sizeof(buffer), fpOutCD)) > 0) {
+          if ((int)fwrite(buffer, 1, nRead, fpOut) != nRead) {
+            err = Z_ERRNO;
+            break;
+          }
+        }
+        fclose(fpOutCD);
+      }
+    }
+    
+    /* Close */
+    fclose(fpZip);
+    fclose(fpOut);
+    
+    /* Wipe temporary file */
+    (void)remove(fileOutTmp);
+    
+    /* Number of recovered entries */
+    if (err == Z_OK) {
+      if (nRecovered != NULL) {
+        *nRecovered = entries;
+      }
+      if (bytesRecovered != NULL) {
+        *bytesRecovered = totalBytes;
+      }
+    }
+  } else {
+    err = Z_STREAM_ERROR;
+  }
+  return err;
+}

contrib/minizip/mztools.h

@@ -0,0 +1,31 @@
+/*
+  Additional tools for Minizip
+  Code: Xavier Roche '2004
+  License: Same as ZLIB (www.gzip.org)
+*/
+
+#ifndef _zip_tools_H
+#define _zip_tools_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef _ZLIB_H
+#include "zlib.h"
+#endif
+
+#include "unzip.h"
+
+/* Repair a ZIP file (missing central directory) 
+   file: file to recover
+   fileOut: output file after recovery
+   fileOutTmp: temporary file name used for recovery
+*/
+extern int ZEXPORT unzRepair(const char* file, 
+                             const char* fileOut, 
+                             const char* fileOutTmp, 
+                             uLong* nRecovered,
+                             uLong* bytesRecovered);
+
+#endif

contrib/minizip/unzip.c

@@ -1,7 +1,7 @@
 /* unzip.c -- IO for uncompress .zip files using zlib
-   Version 1.00, September 10th, 2003
+   Version 1.01e, February 12th, 2005
 
-   Copyright (C) 1998-2003 Gilles Vollant
+   Copyright (C) 1998-2005 Gilles Vollant
 
    Read unzip.h for more info
 */
@@ -88,7 +88,7 @@ woven in by Terry Thorsen 1/2003.
 
 
 const char unz_copyright[] =
-   " unzip 1.00 Copyright 1998-2003 Gilles Vollant - http://www.winimage.com/zLibDll";
+   " unzip 1.01 Copyright 1998-2004 Gilles Vollant - http://www.winimage.com/zLibDll";
 
 /* unz_file_info_interntal contain internal info about a file in zipfile*/
 typedef struct unz_file_info_internal_s
@@ -798,6 +798,7 @@ extern int ZEXPORT unzGoToNextFile (file)
     s=(unz_s*)file;
     if (!s->current_file_ok)
         return UNZ_END_OF_LIST_OF_FILE;
+    if (s->gi.number_entry != 0xffff)    /* 2^16 files overflow hack */
       if (s->num_file+1==s->gi.number_entry)
         return UNZ_END_OF_LIST_OF_FILE;
 
@@ -1136,7 +1137,10 @@ extern int ZEXPORT unzOpenCurrentFile3 (file, method, level, raw, password)
       if (err == Z_OK)
         pfile_in_zip_read_info->stream_initialised=1;
       else
+      {
+        TRYFREE(pfile_in_zip_read_info);
         return err;
+      }
         /* windowBits is passed < 0 to tell that there is no zlib header.
          * Note that in this case inflate *requires* an extra "dummy" byte
          * after the compressed stream in order to complete decompression and
@@ -1244,10 +1248,18 @@ extern int ZEXPORT unzReadCurrentFile  (file, buf, len)
 
     pfile_in_zip_read_info->stream.avail_out = (uInt)len;
 
-    if (len>pfile_in_zip_read_info->rest_read_uncompressed)
+    if ((len>pfile_in_zip_read_info->rest_read_uncompressed) &&
+        (!(pfile_in_zip_read_info->raw)))
         pfile_in_zip_read_info->stream.avail_out =
             (uInt)pfile_in_zip_read_info->rest_read_uncompressed;
 
+    if ((len>pfile_in_zip_read_info->rest_read_compressed+
+           pfile_in_zip_read_info->stream.avail_in) &&
+         (pfile_in_zip_read_info->raw))
+        pfile_in_zip_read_info->stream.avail_out =
+            (uInt)pfile_in_zip_read_info->rest_read_compressed+
+            pfile_in_zip_read_info->stream.avail_in;
+
     while (pfile_in_zip_read_info->stream.avail_out>0)
     {
         if ((pfile_in_zip_read_info->stream.avail_in==0) &&
@@ -1339,6 +1351,9 @@ extern int ZEXPORT unzReadCurrentFile  (file, buf, len)
             */
             err=inflate(&pfile_in_zip_read_info->stream,flush);
 
+            if ((err>=0) && (pfile_in_zip_read_info->stream.msg!=NULL))
+              err = Z_DATA_ERROR;
+
             uTotalOutAfter = pfile_in_zip_read_info->stream.total_out;
             uOutThis = uTotalOutAfter-uTotalOutBefore;
 
@@ -1461,7 +1476,7 @@ extern int ZEXPORT unzGetLocalExtrafield (file,buf,len)
 
     if (ZREAD(pfile_in_zip_read_info->z_filefunc,
               pfile_in_zip_read_info->filestream,
-              buf,size_to_read)!=size_to_read)
+              buf,read_now)!=read_now)
         return UNZ_ERRNO;
 
     return (int)read_now;
@@ -1544,3 +1559,40 @@ extern int ZEXPORT unzGetGlobalComment (file, szComment, uSizeBuf)
         *(szComment+s->gi.size_comment)='\0';
     return (int)uReadThis;
 }
+
+/* Additions by RX '2004 */
+extern uLong ZEXPORT unzGetOffset (file)
+    unzFile file;
+{
+    unz_s* s;
+
+    if (file==NULL)
+          return UNZ_PARAMERROR;
+    s=(unz_s*)file;
+    if (!s->current_file_ok)
+      return 0;
+    if (s->gi.number_entry != 0 && s->gi.number_entry != 0xffff)
+      if (s->num_file==s->gi.number_entry)
+         return 0;
+    return s->pos_in_central_dir;
+}
+
+extern int ZEXPORT unzSetOffset (file, pos)
+        unzFile file;
+        uLong pos;
+{
+    unz_s* s;
+    int err;
+
+    if (file==NULL)
+        return UNZ_PARAMERROR;
+    s=(unz_s*)file;
+
+    s->pos_in_central_dir = pos;
+    s->num_file = s->gi.number_entry;      /* hack */
+    err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info,
+                                              &s->cur_file_info_internal,
+                                              NULL,0,NULL,0,NULL,0);
+    s->current_file_ok = (err == UNZ_OK);
+    return err;
+}

contrib/minizip/unzip.h

@@ -1,11 +1,13 @@
 /* unzip.h -- IO for uncompress .zip files using zlib
-   Version 1.00, September 10th, 2003
+   Version 1.01e, February 12th, 2005
 
-   Copyright (C) 1998-2003 Gilles Vollant
+   Copyright (C) 1998-2005 Gilles Vollant
 
    This unzip package allow extract file from .ZIP file, compatible with PKZip 2.04g
      WinZip, InfoZip tools and compatible.
-   Encryption and multi volume ZipFile (span) are not supported.
+
+   Multi volume ZipFile (span) are not supported.
+   Encryption compatible with pkzip 2.04g only supported
    Old compressions used by old PKZip 1.x are not supported
 
 
@@ -335,6 +337,16 @@ extern int ZEXPORT unzGetLocalExtrafield OF((unzFile file,
     the error code
 */
 
+/***************************************************************************/
+
+/* Get the current file offset */
+extern uLong ZEXPORT unzGetOffset (unzFile file);
+
+/* Set the current file offset */
+extern int ZEXPORT unzSetOffset (unzFile file, uLong pos);
+
+
+
 #ifdef __cplusplus
 }
 #endif

contrib/minizip/zip.c

@@ -1,7 +1,10 @@
 /* zip.c -- IO on .zip files using zlib
-   Version 1.00, September 10th, 2003
+   Version 1.01e, February 12th, 2005
 
-   Copyright (C) 1998-2003 Gilles Vollant
+   27 Dec 2004 Rolf Kalbermatter
+   Modification to zipOpen2 to support globalComment retrieval.
+
+   Copyright (C) 1998-2005 Gilles Vollant
 
    Read zip.h for more info
 */
@@ -77,7 +80,7 @@
 #endif
 #endif
 const char zip_copyright[] =
-   " zip 1.00 Copyright 1998-2003 Gilles Vollant - http://www.winimage.com/zLibDll";
+   " zip 1.01 Copyright 1998-2004 Gilles Vollant - http://www.winimage.com/zLibDll";
 
 
 #define SIZEDATA_INDATABLOCK (4096-(4*4))
@@ -143,6 +146,9 @@ typedef struct
     uLong begin_pos;            /* position of the beginning of the zipfile */
     uLong add_position_when_writting_offset;
     uLong number_entry;
+#ifndef NO_ADDFILEINEXISTINGZIP
+    char *globalcomment;
+#endif
 } zip_internal;
 
 
@@ -265,10 +271,19 @@ local int ziplocal_putValue (pzlib_filefunc_def, filestream, x, nbByte)
 {
     unsigned char buf[4];
     int n;
-    for (n = 0; n < nbByte; n++) {
+    for (n = 0; n < nbByte; n++)
+    {
         buf[n] = (unsigned char)(x & 0xff);
         x >>= 8;
     }
+    if (x != 0)
+      {     /* data overflow - hack for ZIP64 (X Roche) */
+      for (n = 0; n < nbByte; n++)
+        {
+          buf[n] = 0xff;
+        }
+      }
+
     if (ZWRITE(*pzlib_filefunc_def,filestream,buf,nbByte)!=(uLong)nbByte)
         return ZIP_ERRNO;
     else
@@ -287,7 +302,16 @@ local void ziplocal_putValue_inmemory (dest, x, nbByte)
         buf[n] = (unsigned char)(x & 0xff);
         x >>= 8;
     }
+
+    if (x != 0)
+    {     /* data overflow - hack for ZIP64 */
+       for (n = 0; n < nbByte; n++)
+       {
+          buf[n] = 0xff;
        }
+    }
+}
+
 /****************************************************************************/
 
 
@@ -514,6 +538,7 @@ extern zipFile ZEXPORT zipOpen2 (pathname, append, globalcomment, pzlib_filefunc
 
     /* now we add file in a zipfile */
 #    ifndef NO_ADDFILEINEXISTINGZIP
+    ziinit.globalcomment = NULL;
     if (append == APPEND_STATUS_ADDINZIP)
     {
         uLong byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/
@@ -574,7 +599,7 @@ extern zipFile ZEXPORT zipOpen2 (pathname, append, globalcomment, pzlib_filefunc
         if (ziplocal_getLong(&ziinit.z_filefunc, ziinit.filestream,&offset_central_dir)!=ZIP_OK)
             err=ZIP_ERRNO;
 
-        /* zipfile comment length */
+        /* zipfile global comment length */
         if (ziplocal_getShort(&ziinit.z_filefunc, ziinit.filestream,&size_comment)!=ZIP_OK)
             err=ZIP_ERRNO;
 
@@ -588,6 +613,16 @@ extern zipFile ZEXPORT zipOpen2 (pathname, append, globalcomment, pzlib_filefunc
             return NULL;
         }
 
+        if (size_comment>0)
+        {
+            ziinit.globalcomment = ALLOC(size_comment+1);
+            if (ziinit.globalcomment)
+            {
+               size_comment = ZREAD(ziinit.z_filefunc, ziinit.filestream,ziinit.globalcomment,size_comment);
+               ziinit.globalcomment[size_comment]=0;
+            }
+        }
+
         byte_before_the_zipfile = central_pos -
                                 (offset_central_dir+size_central_dir);
         ziinit.add_position_when_writting_offset = byte_before_the_zipfile;
@@ -623,10 +658,18 @@ extern zipFile ZEXPORT zipOpen2 (pathname, append, globalcomment, pzlib_filefunc
                   offset_central_dir+byte_before_the_zipfile,ZLIB_FILEFUNC_SEEK_SET)!=0)
             err=ZIP_ERRNO;
     }
+
+    if (globalcomment)
+    {
+      *globalcomment = ziinit.globalcomment;
+    }
 #    endif /* !NO_ADDFILEINEXISTINGZIP*/
 
     if (err != ZIP_OK)
     {
+#    ifndef NO_ADDFILEINEXISTINGZIP
+        TRYFREE(ziinit.globalcomment);
+#    endif /* !NO_ADDFILEINEXISTINGZIP*/
         TRYFREE(zi);
         return NULL;
     }
@@ -699,9 +742,9 @@ extern int ZEXPORT zipOpenNewFileInZip3 (file, filename, zipfi,
     if (comment==NULL)
         size_comment = 0;
     else
-        size_comment = strlen(comment);
+        size_comment = (uInt)strlen(comment);
 
-    size_filename = strlen(filename);
+    size_filename = (uInt)strlen(filename);
 
     if (zipfi == NULL)
         zi->ci.dosDate = 0;
@@ -1105,11 +1148,14 @@ extern int ZEXPORT zipClose (file, global_comment)
         err = zipCloseFileInZip (file);
     }
 
+#ifndef NO_ADDFILEINEXISTINGZIP
+    if (global_comment==NULL)
+        global_comment = zi->globalcomment;
+#endif
     if (global_comment==NULL)
         size_global_comment = 0;
     else
-        size_global_comment = strlen(global_comment);
+        size_global_comment = (uInt)strlen(global_comment);
-
 
     centraldir_pos_inzip = ZTELL(zi->z_filefunc,zi->filestream);
     if (err==ZIP_OK)
@@ -1164,6 +1210,9 @@ extern int ZEXPORT zipClose (file, global_comment)
         if (err == ZIP_OK)
             err = ZIP_ERRNO;
 
+#ifndef NO_ADDFILEINEXISTINGZIP
+    TRYFREE(zi->globalcomment);
+#endif
     TRYFREE(zi);
 
     return err;

contrib/minizip/zip.h

@@ -1,11 +1,12 @@
 /* zip.h -- IO for compress .zip files using zlib
-   Version 1.00, September 10th, 2003
+   Version 1.01e, February 12th, 2005
 
-   Copyright (C) 1998-2003 Gilles Vollant
+   Copyright (C) 1998-2005 Gilles Vollant
 
    This unzip package allow creates .ZIP file, compatible with PKZip 2.04g
      WinZip, InfoZip tools and compatible.
-   Encryption and multi volume ZipFile (span) are not supported.
+   Multi volume ZipFile (span) are not supported.
+   Encryption compatible with pkzip 2.04g only supported
    Old compressions used by old PKZip 1.x are not supported
 
   For uncompress .zip file, look at unzip.h
@@ -212,7 +213,6 @@ extern int ZEXPORT zipCloseFileInZip OF((zipFile file));
   Close the current file in the zipfile
 */
 
-
 extern int ZEXPORT zipCloseFileInZipRaw OF((zipFile file,
                                             uLong uncompressed_size,
                                             uLong crc32));

contrib/pascal/zlibpas.pas

@@ -10,7 +10,7 @@ unit zlibpas;
 interface
 
 const
-  ZLIB_VERSION = '1.2.1';
+  ZLIB_VERSION = '1.2.2';
 
 type
   alloc_func = function(opaque: Pointer; items, size: Integer): Pointer;

contrib/testzlib/rdtsc64.asm

@@ -0,0 +1,18 @@
+; rdtsc64.asm
+;
+; unsigned _int64 myrdtsc();
+;
+; return the performance rdtsc value, on AMD64/Intel EM64T
+;
+; compile with :
+;    ml64.exe" /Flrdtsc64   /c /Zi rdtsc64.asm
+;
+.code
+myrdtsc PROC
+          rdtsc
+          shl rdx,32
+          or rax,rdx
+          ret
+myrdtsc ENDP
+
+END

contrib/testzlib/testzlib.c

@@ -4,6 +4,101 @@
 #include <windows.h>
 #include "zlib.h"
 
+
+void MyDoMinus64(LARGE_INTEGER *R,LARGE_INTEGER A,LARGE_INTEGER B)
+{
+    R->HighPart = A.HighPart - B.HighPart;
+    if (A.LowPart >= B.LowPart)
+        R->LowPart = A.LowPart - B.LowPart;
+    else
+    {
+        R->LowPart = A.LowPart - B.LowPart;
+        R->HighPart --;
+    }
+}
+
+#ifdef _AMD64_
+unsigned _int64 myrdtsc();
+void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64)
+{
+ //   printf("rdtsc = %I64x\n",myrdtsc());
+   pbeginTime64->QuadPart=myrdtsc();
+}
+
+LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf)
+{
+    LARGE_INTEGER LIres;
+    unsigned _int64 res=myrdtsc()-((unsigned _int64)(beginTime64.QuadPart));
+    LIres.QuadPart=res;
+   // printf("rdtsc = %I64x\n",myrdtsc());
+    return LIres;
+}
+#else
+void myGetRDTSC32(LARGE_INTEGER * pbeginTime64)
+{
+    DWORD dwEdx,dwEax;
+    _asm
+    {
+        rdtsc
+        mov dwEax,eax
+        mov dwEdx,edx
+    }
+    pbeginTime64->LowPart=dwEax;
+    pbeginTime64->HighPart=dwEdx;
+}
+
+void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64)
+{
+    myGetRDTSC32(pbeginTime64);
+}
+
+LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf)
+{
+    LARGE_INTEGER LIres,endTime64;
+    myGetRDTSC32(&endTime64);
+
+    LIres.LowPart=LIres.HighPart=0;
+    MyDoMinus64(&LIres,endTime64,beginTime64);
+    return LIres;
+}
+#endif
+
+
+void BeginCountPerfCounter(LARGE_INTEGER * pbeginTime64,BOOL fComputeTimeQueryPerf)
+{
+    if ((!fComputeTimeQueryPerf) || (!QueryPerformanceCounter(pbeginTime64)))
+    {
+        pbeginTime64->LowPart = GetTickCount();
+        pbeginTime64->HighPart = 0;
+    }
+}
+
+DWORD GetMsecSincePerfCounter(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf)
+{
+    LARGE_INTEGER endTime64,ticksPerSecond,ticks;
+    DWORDLONG ticksShifted,tickSecShifted;
+    DWORD dwLog=16+0;
+    DWORD dwRet;
+    if ((!fComputeTimeQueryPerf) || (!QueryPerformanceCounter(&endTime64)))
+        dwRet = (GetTickCount() - beginTime64.LowPart)*1;
+    else
+    {
+        MyDoMinus64(&ticks,endTime64,beginTime64);
+        QueryPerformanceFrequency(&ticksPerSecond);
+
+    
+        {
+            ticksShifted = Int64ShrlMod32(*(DWORDLONG*)&ticks,dwLog);
+            tickSecShifted = Int64ShrlMod32(*(DWORDLONG*)&ticksPerSecond,dwLog);
+        
+        } 
+
+        dwRet = (DWORD)((((DWORD)ticksShifted)*1000)/(DWORD)(tickSecShifted));
+        dwRet *=1;
+    }
+    return dwRet;
+}
+
 int ReadFileMemory(const char* filename,long* plFileSize,void** pFilePtr)
 {
     FILE* stream;
@@ -43,7 +138,8 @@ int main(int argc, char *argv[])
     unsigned char* CprPtr;
     unsigned char* UncprPtr;
     long lSizeCpr,lSizeUncpr;
-    DWORD dwGetTick;
+    DWORD dwGetTick,dwMsecQP;
+    LARGE_INTEGER li_qp,li_rdtsc,dwResRdtsc;
 
     if (argc<=1)
     {
@@ -71,9 +167,10 @@ int main(int argc, char *argv[])
     lBufferSizeUncpr = lBufferSizeCpr;
 
     CprPtr=(unsigned char*)malloc(lBufferSizeCpr + BlockSizeCompress);
-    UncprPtr=(unsigned char*)malloc(lBufferSizeUncpr + BlockSizeUncompress);
 
+    BeginCountPerfCounter(&li_qp,TRUE);
     dwGetTick=GetTickCount();
+    BeginCountRdtsc(&li_rdtsc);
     {
         z_stream zcpr;
         int ret=Z_OK;
@@ -101,11 +198,20 @@ int main(int argc, char *argv[])
         lSizeCpr=zcpr.total_out;
         deflateEnd(&zcpr);
         dwGetTick=GetTickCount()-dwGetTick;
+        dwMsecQP=GetMsecSincePerfCounter(li_qp,TRUE);
+        dwResRdtsc=GetResRdtsc(li_rdtsc,TRUE);
         printf("total compress size = %u, in %u step\n",lSizeCpr,step);
-        printf("time = %u msec = %f sec\n\n",dwGetTick,dwGetTick/(double)1000.);
+        printf("time = %u msec = %f sec\n",dwGetTick,dwGetTick/(double)1000.);
+        printf("defcpr time QP = %u msec = %f sec\n",dwMsecQP,dwMsecQP/(double)1000.);
+        printf("defcpr result rdtsc = %I64x\n\n",dwResRdtsc.QuadPart);
     }
 
+    CprPtr=(unsigned char*)realloc(CprPtr,lSizeCpr);
+    UncprPtr=(unsigned char*)malloc(lBufferSizeUncpr + BlockSizeUncompress);
+
+    BeginCountPerfCounter(&li_qp,TRUE);
     dwGetTick=GetTickCount();
+    BeginCountRdtsc(&li_rdtsc);
     {
         z_stream zcpr;
         int ret=Z_OK;
@@ -133,8 +239,12 @@ int main(int argc, char *argv[])
         lSizeUncpr=zcpr.total_out;
         inflateEnd(&zcpr);
         dwGetTick=GetTickCount()-dwGetTick;
+        dwMsecQP=GetMsecSincePerfCounter(li_qp,TRUE);
+        dwResRdtsc=GetResRdtsc(li_rdtsc,TRUE);
         printf("total uncompress size = %u, in %u step\n",lSizeUncpr,step);
-        printf("time = %u msec = %f sec\n\n",dwGetTick,dwGetTick/(double)1000.);
+        printf("time = %u msec = %f sec\n",dwGetTick,dwGetTick/(double)1000.);
+        printf("uncpr  time QP = %u msec = %f sec\n",dwMsecQP,dwMsecQP/(double)1000.);
+        printf("uncpr  result rdtsc = %I64x\n\n",dwResRdtsc.QuadPart);
     }
 
     if (lSizeUncpr==lFileSize)
@@ -145,5 +255,4 @@ int main(int argc, char *argv[])
     }
 
     return 0;
-
 }

contrib/testzlib/testzlib.txt

@@ -0,0 +1,10 @@
+To build testzLib with Visual Studio 2005:
+
+copy to a directory file from :
+- root of zLib tree
+- contrib/testzlib
+- contrib/masmx86
+- contrib/masmx64
+- contrib/vstudio/vc7
+
+and open testzlib8.sln

contrib/testzlib/testzlib8.sln

@@ -0,0 +1,32 @@
+
+Microsoft Visual Studio Solution File, Format Version 9.00
+# Visual Studio 2005
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testzlib8", "testzlib8.vcproj", "{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|Win32 = Debug|Win32
+		Debug|Win64 (AMD64) = Debug|Win64 (AMD64)
+		Release|Win32 = Release|Win32
+		Release|Win64 (AMD64) = Release|Win64 (AMD64)
+		ReleaseAsm|Win32 = ReleaseAsm|Win32
+		ReleaseAsm|Win64 (AMD64) = ReleaseAsm|Win64 (AMD64)
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win64 (AMD64).ActiveCfg = Debug|Win64 (AMD64)
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win64 (AMD64).Build.0 = Debug|Win64 (AMD64)
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win64 (AMD64).ActiveCfg = Release|Win64 (AMD64)
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win64 (AMD64).Build.0 = Release|Win64 (AMD64)
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseAsm|Win32.ActiveCfg = ReleaseAsm|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseAsm|Win32.Build.0 = ReleaseAsm|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseAsm|Win64 (AMD64).ActiveCfg = ReleaseAsm|Win64 (AMD64)
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseAsm|Win64 (AMD64).Build.0 = ReleaseAsm|Win64 (AMD64)
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+EndGlobal

contrib/testzlib/testzlib8.vcproj

@@ -0,0 +1,638 @@
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+	ProjectType="Visual C++"
+	Version="8,00"
+	Name="testzlib8"
+	ProjectGUID="{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}"
+	Keyword="Win32Proj"
+	>
+	<Platforms>
+		<Platform
+			Name="Win32"
+		/>
+		<Platform
+			Name="Win64 (AMD64)"
+		/>
+	</Platforms>
+	<ToolFiles>
+		<DefaultToolFile
+			FileName="masm.tool"
+		/>
+	</ToolFiles>
+	<Configurations>
+		<Configuration
+			Name="Debug|Win32"
+			OutputDirectory="x86\$(ConfigurationName)"
+			IntermediateDirectory="x86\$(ConfigurationName)"
+			ConfigurationType="1"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="MASM"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				PreprocessorDefinitions="ASMV;ASMINF;WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE"
+				MinimalRebuild="TRUE"
+				BasicRuntimeChecks="3"
+				RuntimeLibrary="1"
+				UsePrecompiledHeader="0"
+				AssemblerOutput="4"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="TRUE"
+				DebugInformationFormat="4"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="gvmat32.obj inffas32.obj"
+				OutputFile="$(OutDir)/testzlib.exe"
+				LinkIncremental="2"
+				GenerateDebugInformation="TRUE"
+				ProgramDatabaseFile="$(OutDir)/testzlib.pdb"
+				SubSystem="1"
+				TargetMachine="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Debug|Win64 (AMD64)"
+			OutputDirectory="amd64\$(ConfigurationName)"
+			IntermediateDirectory="amd64\$(ConfigurationName)"
+			ConfigurationType="1"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="MASM"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="3"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				PreprocessorDefinitions="ASMV;ASMINF;WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE"
+				MinimalRebuild="TRUE"
+				BasicRuntimeChecks="3"
+				RuntimeLibrary="1"
+				UsePrecompiledHeader="0"
+				AssemblerOutput="4"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="TRUE"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+				CommandLine=""
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="gvmat64.obj inffasx64.obj rdtsc64.obj"
+				OutputFile="$(OutDir)/testzlib.exe"
+				LinkIncremental="2"
+				GenerateDebugInformation="TRUE"
+				ProgramDatabaseFile="$(OutDir)/testzlib.pdb"
+				SubSystem="1"
+				TargetMachine="17"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|Win32"
+			OutputDirectory="x86\$(ConfigurationName)"
+			IntermediateDirectory="x86\$(ConfigurationName)"
+			ConfigurationType="1"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="MASM"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				OmitFramePointers="TRUE"
+				PreprocessorDefinitions="WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE"
+				StringPooling="TRUE"
+				RuntimeLibrary="0"
+				EnableFunctionLevelLinking="TRUE"
+				UsePrecompiledHeader="0"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="TRUE"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				OutputFile="$(OutDir)/testzlib.exe"
+				LinkIncremental="1"
+				GenerateDebugInformation="TRUE"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|Win64 (AMD64)"
+			OutputDirectory="amd64\$(ConfigurationName)"
+			IntermediateDirectory="amd64\$(ConfigurationName)"
+			ConfigurationType="1"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="MASM"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="3"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				OmitFramePointers="TRUE"
+				PreprocessorDefinitions="WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE"
+				StringPooling="TRUE"
+				RuntimeLibrary="0"
+				EnableFunctionLevelLinking="TRUE"
+				UsePrecompiledHeader="0"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="TRUE"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="rdtsc64.obj"
+				OutputFile="$(OutDir)/testzlib.exe"
+				LinkIncremental="1"
+				GenerateDebugInformation="TRUE"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="17"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="ReleaseAsm|Win32"
+			OutputDirectory="x86\$(ConfigurationName)"
+			IntermediateDirectory="x86\$(ConfigurationName)"
+			ConfigurationType="1"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="MASM"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				OmitFramePointers="TRUE"
+				PreprocessorDefinitions="ASMV;ASMINF;WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE"
+				StringPooling="TRUE"
+				RuntimeLibrary="0"
+				EnableFunctionLevelLinking="TRUE"
+				UsePrecompiledHeader="0"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="TRUE"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="gvmat32.obj inffas32.obj"
+				OutputFile="$(OutDir)/testzlib.exe"
+				LinkIncremental="1"
+				GenerateDebugInformation="TRUE"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="ReleaseAsm|Win64 (AMD64)"
+			OutputDirectory="amd64\$(ConfigurationName)"
+			IntermediateDirectory="amd64\$(ConfigurationName)"
+			ConfigurationType="1"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+				CommandLine=""
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="MASM"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="3"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				OmitFramePointers="TRUE"
+				PreprocessorDefinitions="ASMV;ASMINF;WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_SECURE_NO_DEPRECATE"
+				StringPooling="TRUE"
+				RuntimeLibrary="0"
+				EnableFunctionLevelLinking="TRUE"
+				UsePrecompiledHeader="0"
+				AssemblerOutput="4"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="TRUE"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+				CommandLine=""
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="gvmat64.obj inffasx64.obj rdtsc64.obj"
+				OutputFile="$(OutDir)/testzlib.exe"
+				LinkIncremental="1"
+				GenerateDebugInformation="TRUE"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="17"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+	</Configurations>
+	<References>
+	</References>
+	<Files>
+		<Filter
+			Name="Source Files"
+			Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm"
+			>
+			<File
+				RelativePath=".\adler32.c"
+				>
+			</File>
+			<File
+				RelativePath=".\compress.c"
+				>
+			</File>
+			<File
+				RelativePath=".\crc32.c"
+				>
+			</File>
+			<File
+				RelativePath=".\deflate.c"
+				>
+			</File>
+			<File
+				RelativePath=".\gvmat32c.c"
+				>
+				<FileConfiguration
+					Name="Debug|Win64 (AMD64)"
+					ExcludedFromBuild="TRUE"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="Release|Win64 (AMD64)"
+					ExcludedFromBuild="TRUE"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="ReleaseAsm|Win32"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="ReleaseAsm|Win64 (AMD64)"
+					ExcludedFromBuild="TRUE"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+			</File>
+			<File
+				RelativePath=".\infback.c"
+				>
+			</File>
+			<File
+				RelativePath=".\inffas8664.c"
+				>
+				<FileConfiguration
+					Name="Debug|Win32"
+					ExcludedFromBuild="TRUE"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="Release|Win32"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="ReleaseAsm|Win32"
+					ExcludedFromBuild="TRUE"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+			</File>
+			<File
+				RelativePath=".\inffast.c"
+				>
+			</File>
+			<File
+				RelativePath=".\inflate.c"
+				>
+			</File>
+			<File
+				RelativePath=".\inftrees.c"
+				>
+			</File>
+			<File
+				RelativePath="testzlib.c"
+				>
+			</File>
+			<File
+				RelativePath=".\trees.c"
+				>
+			</File>
+			<File
+				RelativePath=".\uncompr.c"
+				>
+			</File>
+			<File
+				RelativePath=".\zutil.c"
+				>
+			</File>
+		</Filter>
+		<Filter
+			Name="Header Files"
+			Filter="h;hpp;hxx;hm;inl;inc"
+			>
+		</Filter>
+		<Filter
+			Name="Resource Files"
+			Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+			>
+		</Filter>
+	</Files>
+	<Globals>
+	</Globals>
+</VisualStudioProject>

contrib/untgz/untgz.c

@@ -1,7 +1,7 @@
 /*
  * untgz.c -- Display contents and extract files from a gzip'd TAR file
  *
- * written by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+ * written by Pedro A. Aranda Gutierrez <paag@tid.es>
  * adaptation to Unix by Jean-loup Gailly <jloup@gzip.org>
  * various fixes by Cosmin Truta <cosmint@cs.ubbcluj.ro>
  */
@@ -28,8 +28,9 @@
 #  endif
 #  define mkdir(dirname,mode)   _mkdir(dirname)
 #  ifdef _MSC_VER
-#    define strdup(str)         _strdup(str)
 #    define access(path,mode)   _access(path,mode)
+#    define chmod(path,mode)    _chmod(path,mode)
+#    define strdup(str)         _strdup(str)
 #  endif
 #else
 #  include <utime.h>
@@ -48,7 +49,21 @@
 #define FIFOTYPE '6'            /* FIFO special */
 #define CONTTYPE '7'            /* reserved */
 
+/* GNU tar extensions */
+
+#define GNUTYPE_DUMPDIR  'D'    /* file names from dumped directory */
+#define GNUTYPE_LONGLINK 'K'    /* long link name */
+#define GNUTYPE_LONGNAME 'L'    /* long file name */
+#define GNUTYPE_MULTIVOL 'M'    /* continuation of file from another volume */
+#define GNUTYPE_NAMES    'N'    /* file name that does not fit into main hdr */
+#define GNUTYPE_SPARSE   'S'    /* sparse file */
+#define GNUTYPE_VOLHDR   'V'    /* tape/volume header */
+
+
+/* tar header */
+
 #define BLOCKSIZE     512
+#define SHORTNAMESIZE 100
 
 struct tar_header
 {                               /* byte offset */
@@ -71,11 +86,20 @@ struct tar_header
                                 /* 500 */
 };
 
-union tar_buffer {
+union tar_buffer
+{
   char               buffer[BLOCKSIZE];
   struct tar_header  header;
 };
 
+struct attr_item
+{
+  struct attr_item  *next;
+  char              *fname;
+  int                mode;
+  time_t             time;
+};
+
 enum { TGZ_EXTRACT, TGZ_LIST, TGZ_INVALID };
 
 char *TGZfname          OF((const char *));
@@ -84,6 +108,9 @@ void TGZnotfound        OF((const char *));
 int getoct              OF((char *, int));
 char *strtime           OF((time_t *));
 int setfiletime         OF((char *, time_t));
+void push_attr          OF((struct attr_item **, char *, int, time_t));
+void restore_attr       OF((struct attr_item **));
+
 int ExprMatch           OF((char *, char *));
 
 int makedir             OF((char *));
@@ -221,7 +248,42 @@ int setfiletime (char *fname,time_t ftime)
 }
 
 
-/* regular expression matching */
+/* push file attributes */
+
+void push_attr(struct attr_item **list,char *fname,int mode,time_t time)
+{
+  struct attr_item *item;
+
+  item = (struct attr_item *)malloc(sizeof(struct attr_item));
+  if (item == NULL)
+    error("Out of memory");
+  item->fname = strdup(fname);
+  item->mode  = mode;
+  item->time  = time;
+  item->next  = *list;
+  *list       = item;
+}
+
+
+/* restore file attributes */
+
+void restore_attr(struct attr_item **list)
+{
+  struct attr_item *item, *prev;
+
+  for (item = *list; item != NULL; )
+    {
+      setfiletime(item->fname,item->time);
+      chmod(item->fname,item->mode);
+      prev = item;
+      item = item->next;
+      free(prev);
+    }
+  *list = NULL;
+}
+
+
+/* match regular expression */
 
 #define ISSPECIAL(c) (((c) == '*') || ((c) == '/'))
 
@@ -332,6 +394,7 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
   char   fname[BLOCKSIZE];
   int    tarmode;
   time_t tartime;
+  struct attr_item *attributes = NULL;
 
   if (action == TGZ_LIST)
     printf("    date      time     size                       file\n"
@@ -354,14 +417,15 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
       /*
        * If we have to get a tar header
        */
-      if (getheader == 1)
+      if (getheader >= 1)
         {
           /*
            * if we met the end of the tar
            * or the end-of-tar block,
            * we are done
            */
-          if ((len == 0) || (buffer.header.name[0] == 0)) break;
+          if (len == 0 || buffer.header.name[0] == 0)
+            break;
 
           tarmode = getoct(buffer.header.mode,8);
           tartime = (time_t)getoct(buffer.header.mtime,12);
@@ -371,8 +435,25 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
               action = TGZ_INVALID;
             }
 
-          strcpy(fname,buffer.header.name);
+          if (getheader == 1)
+            {
+              strncpy(fname,buffer.header.name,SHORTNAMESIZE);
+              if (fname[SHORTNAMESIZE-1] != 0)
+                  fname[SHORTNAMESIZE] = 0;
+            }
+          else
+            {
+              /*
+               * The file name is longer than SHORTNAMESIZE
+               */
+              if (strncmp(fname,buffer.header.name,SHORTNAMESIZE-1) != 0)
+                  error("bad long name");
+              getheader = 1;
+            }
 
+          /*
+           * Act according to the type flag
+           */
           switch (buffer.header.typeflag)
             {
             case DIRTYPE:
@@ -381,7 +462,7 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
               if (action == TGZ_EXTRACT)
                 {
                   makedir(fname);
-                  setfiletime(fname,tartime);
+                  push_attr(&attributes,fname,tarmode,tartime);
                 }
               break;
             case REGTYPE:
@@ -419,6 +500,24 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
                 }
               getheader = 0;
               break;
+            case GNUTYPE_LONGLINK:
+            case GNUTYPE_LONGNAME:
+              remaining = getoct(buffer.header.size,12);
+              if (remaining < 0 || remaining >= BLOCKSIZE)
+                {
+                  action = TGZ_INVALID;
+                  break;
+                }
+              len = gzread(in, fname, BLOCKSIZE);
+              if (len < 0)
+                error(gzerror(in, &err));
+              if (fname[BLOCKSIZE-1] != 0 || (int)strlen(fname) > remaining)
+                {
+                  action = TGZ_INVALID;
+                  break;
+                }
+              getheader = 2;
+              break;
             default:
               if (action == TGZ_LIST)
                 printf(" %s     <---> %s\n",strtime(&tartime),fname);
@@ -433,7 +532,8 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
             {
               if (fwrite(&buffer,sizeof(char),bytes,outfile) != bytes)
                 {
-                  fprintf(stderr,"%s: Error writing %s -- skipping\n",prog,fname);
+                  fprintf(stderr,
+                    "%s: Error writing %s -- skipping\n",prog,fname);
                   fclose(outfile);
                   outfile = NULL;
                   remove(fname);
@@ -450,7 +550,7 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
               fclose(outfile);
               outfile = NULL;
               if (action != TGZ_INVALID)
-                setfiletime(fname,tartime);
+                push_attr(&attributes,fname,tarmode,tartime);
             }
         }
 
@@ -464,6 +564,11 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
         }
     }
 
+  /*
+   * Restore file modes and time stamps
+   */
+  restore_attr(&attributes);
+
   if (gzclose(in) != Z_OK)
     error("failed gzclose");
 
@@ -475,7 +580,7 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
 
 void help(int exitval)
 {
-  printf("untgz version 0.2\n"
+  printf("untgz version 0.2.1\n"
          "  using zlib version %s\n\n",
          zlibVersion());
   printf("Usage: untgz file.tgz            extract all files\n"

contrib/vstudio/readme.txt

@@ -1,4 +1,4 @@
-Building instructions for the DLL versions of Zlib 1.21
+Building instructions for the DLL versions of Zlib 1.2.x
 =======================================================
 
 This directory contains projects that build zlib and minizip using

contrib/vstudio/vc7/zlib.rc

@@ -2,8 +2,8 @@
 
 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1,2,1,0
+  FILEVERSION	 1,2,2,3
-  PRODUCTVERSION 1,2,1,0
+  PRODUCTVERSION 1,2,2,3
   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
   FILEFLAGS	0
   FILEOS	VOS_DOS_WINDOWS32
@@ -17,7 +17,7 @@ BEGIN
 
     BEGIN
       VALUE "FileDescription", "zlib data compression library\0"
-      VALUE "FileVersion",	"1.2.1.0\0"
+      VALUE "FileVersion",	"1.2.2.3\0"
       VALUE "InternalName",	"zlib\0"
       VALUE "OriginalFilename",	"zlib.dll\0"
       VALUE "ProductName",	"ZLib.DLL\0"

crc32.c

@@ -1,16 +1,24 @@
 /* crc32.c -- compute the CRC-32 of a data stream
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2005 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  *
  * Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
  * CRC methods: exclusive-oring 32 bits of data at a time, and pre-computing
  * tables for updating the shift register in one step with three exclusive-ors
- * instead of four steps with four exclusive-ors.  This results about a factor
+ * instead of four steps with four exclusive-ors.  This results in about a
- * of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3.
+ * factor of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3.
  */
 
 /* @(#) $Id$ */
 
+/*
+  Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore
+  protection on the static variables used to control the first-use generation
+  of the crc tables.  Therefore, if you #define DYNAMIC_CRC_TABLE, you should
+  first call get_crc_table() to initialize the tables before allowing more than
+  one thread to use crc32().
+ */
+
 #ifdef MAKECRCH
 #  include <stdio.h>
 #  ifndef DYNAMIC_CRC_TABLE
@@ -58,12 +66,15 @@
 
 #ifdef DYNAMIC_CRC_TABLE
 
-local int crc_table_empty = 1;
+local volatile int crc_table_empty = 1;
 local unsigned long FAR crc_table[TBLS][256];
 local void make_crc_table OF((void));
 #ifdef MAKECRCH
    local void write_table OF((FILE *, const unsigned long FAR *));
 #endif /* MAKECRCH */
+local unsigned long gf2_matrix_times OF((unsigned long *mat,
+                                         unsigned long vec));
+local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
 
 /*
   Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
@@ -97,8 +108,15 @@ local void make_crc_table()
     int n, k;
     unsigned long poly;                 /* polynomial exclusive-or pattern */
     /* terms of polynomial defining this crc (except x^32): */
+    static volatile int first = 1;      /* flag to limit concurrent making */
     static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
 
+    /* See if another task is already doing this (not thread-safe, but better
+       than nothing -- significantly reduces duration of vulnerability in
+       case the advice about DYNAMIC_CRC_TABLE is ignored) */
+    if (first) {
+        first = 0;
+
         /* make exclusive-or pattern from polynomial (0xedb88320UL) */
         poly = 0UL;
         for (n = 0; n < sizeof(p)/sizeof(unsigned char); n++)
@@ -113,8 +131,8 @@ local void make_crc_table()
         }
 
 #ifdef BYFOUR
-    /* generate crc for each value followed by one, two, and three zeros, and
+        /* generate crc for each value followed by one, two, and three zeros,
-       then the byte reversal of those as well as the first table */
+           and then the byte reversal of those as well as the first table */
         for (n = 0; n < 256; n++) {
             c = crc_table[0][n];
             crc_table[4][n] = REV(c);
@@ -127,6 +145,12 @@ local void make_crc_table()
 #endif /* BYFOUR */
 
         crc_table_empty = 0;
+    }
+    else {      /* not first */
+        /* wait for the other guy to finish (not efficient, but rare) */
+        while (crc_table_empty)
+            ;
+    }
 
 #ifdef MAKECRCH
     /* write out CRC tables to crc32.h */
@@ -180,7 +204,8 @@ local void write_table(out, table)
 const unsigned long FAR * ZEXPORT get_crc_table()
 {
 #ifdef DYNAMIC_CRC_TABLE
-  if (crc_table_empty) make_crc_table();
+    if (crc_table_empty)
+        make_crc_table();
 #endif /* DYNAMIC_CRC_TABLE */
     return (const unsigned long FAR *)crc_table;
 }
@@ -248,7 +273,7 @@ local unsigned long crc32_little(crc, buf, len)
         len--;
     }
 
-    buf4 = (const u4 FAR *)buf;
+    buf4 = (const u4 FAR *)(const void FAR *)buf;
     while (len >= 32) {
         DOLIT32;
         len -= 32;
@@ -288,7 +313,7 @@ local unsigned long crc32_big(crc, buf, len)
         len--;
     }
 
-    buf4 = (const u4 FAR *)buf;
+    buf4 = (const u4 FAR *)(const void FAR *)buf;
     buf4--;
     while (len >= 32) {
         DOBIG32;
@@ -309,3 +334,89 @@ local unsigned long crc32_big(crc, buf, len)
 }
 
 #endif /* BYFOUR */
+
+#define GF2_DIM 32      /* dimension of GF(2) vectors (length of CRC) */
+
+/* ========================================================================= */
+local unsigned long gf2_matrix_times(mat, vec)
+    unsigned long *mat;
+    unsigned long vec;
+{
+    unsigned long sum;
+
+    sum = 0;
+    while (vec) {
+        if (vec & 1)
+            sum ^= *mat;
+        vec >>= 1;
+        mat++;
+    }
+    return sum;
+}
+
+/* ========================================================================= */
+local void gf2_matrix_square(square, mat)
+    unsigned long *square;
+    unsigned long *mat;
+{
+    int n;
+
+    for (n = 0; n < GF2_DIM; n++)
+        square[n] = gf2_matrix_times(mat, mat[n]);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT crc32_combine(crc1, crc2, len2)
+    uLong crc1;
+    uLong crc2;
+    z_off_t len2;
+{
+    int n;
+    unsigned long row;
+    unsigned long even[GF2_DIM];    /* even-power-of-two zeros operator */
+    unsigned long odd[GF2_DIM];     /* odd-power-of-two zeros operator */
+
+    /* degenerate case */
+    if (len2 == 0)
+        return crc1;
+
+    /* put operator for one zero bit in odd */
+    odd[0] = 0xedb88320L;           /* CRC-32 polynomial */
+    row = 1;
+    for (n = 1; n < GF2_DIM; n++) {
+        odd[n] = row;
+        row <<= 1;
+    }
+
+    /* put operator for two zero bits in even */
+    gf2_matrix_square(even, odd);
+
+    /* put operator for four zero bits in odd */
+    gf2_matrix_square(odd, even);
+
+    /* apply len2 zeros to crc1 (first square will put the operator for one
+       zero byte, eight zero bits, in even) */
+    do {
+        /* apply zeros operator for this bit of len2 */
+        gf2_matrix_square(even, odd);
+        if (len2 & 1)
+            crc1 = gf2_matrix_times(even, crc1);
+        len2 >>= 1;
+
+        /* if no more bits set, then done */
+        if (len2 == 0)
+            break;
+
+        /* another iteration of the loop with odd and even swapped */
+        gf2_matrix_square(odd, even);
+        if (len2 & 1)
+            crc1 = gf2_matrix_times(odd, crc1);
+        len2 >>= 1;
+
+        /* if no more bits set, then done */
+    } while (len2 != 0);
+
+    /* return combined crc */
+    crc1 ^= crc2;
+    return crc1;
+}

deflate.c

@@ -1,5 +1,5 @@
 /* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995-2003 Jean-loup Gailly.
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -52,7 +52,7 @@
 #include "deflate.h"
 
 const char deflate_copyright[] =
-   " deflate 1.2.1.1 Copyright 1995-2003 Jean-loup Gailly ";
+   " deflate 1.2.2.3 Copyright 1995-2005 Jean-loup Gailly ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -264,7 +264,7 @@ int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
 #endif
     if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
         windowBits < 8 || windowBits > 15 || level < 0 || level > 9 ||
-        strategy < 0 || strategy > Z_RLE) {
+        strategy < 0 || strategy > Z_FIXED) {
         return Z_STREAM_ERROR;
     }
     if (windowBits == 8) windowBits = 9;  /* until 256-byte window bug fixed */
@@ -274,6 +274,7 @@ int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
     s->strm = strm;
 
     s->wrap = wrap;
+    s->gzhead = Z_NULL;
     s->w_bits = windowBits;
     s->w_size = 1 << s->w_bits;
     s->w_mask = s->w_size - 1;
@@ -333,9 +334,7 @@ int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
     if (length < MIN_MATCH) return Z_OK;
     if (length > MAX_DIST(s)) {
         length = MAX_DIST(s);
-#ifndef USE_DICT_HEAD
         dictionary += dictLength - length; /* use the tail of the dictionary */
-#endif
     }
     zmemcpy(s->window, dictionary, length);
     s->strstart = length;
@@ -390,6 +389,17 @@ int ZEXPORT deflateReset (strm)
     return Z_OK;
 }
 
+/* ========================================================================= */
+int ZEXPORT deflateSetHeader (strm, head)
+    z_streamp strm;
+    gz_headerp head;
+{
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    if (strm->state->wrap != 2) return Z_STREAM_ERROR;
+    strm->state->gzhead = head;
+    return Z_OK;
+}
+
 /* ========================================================================= */
 int ZEXPORT deflatePrime (strm, bits, value)
     z_streamp strm;
@@ -420,7 +430,7 @@ int ZEXPORT deflateParams(strm, level, strategy)
 #else
     if (level == Z_DEFAULT_COMPRESSION) level = 6;
 #endif
-    if (level < 0 || level > 9 || strategy < 0 || strategy > Z_RLE) {
+    if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) {
         return Z_STREAM_ERROR;
     }
     func = configuration_table[s->level].func;
@@ -440,6 +450,25 @@ int ZEXPORT deflateParams(strm, level, strategy)
     return err;
 }
 
+/* ========================================================================= */
+int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain)
+    z_streamp strm;
+    int good_length;
+    int max_lazy;
+    int nice_length;
+    int max_chain;
+{
+    deflate_state *s;
+
+    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+    s = strm->state;
+    s->good_match = good_length;
+    s->max_lazy_match = max_lazy;
+    s->nice_match = nice_length;
+    s->max_chain_length = max_chain;
+    return Z_OK;
+}
+
 /* =========================================================================
  * For the default windowBits of 15 and memLevel of 8, this function returns
  * a close to exact, as well as small, upper bound on the compressed size.
@@ -548,9 +577,11 @@ int ZEXPORT deflate (strm, flush)
     if (s->status == INIT_STATE) {
 #ifdef GZIP
         if (s->wrap == 2) {
+            strm->adler = crc32(0L, Z_NULL, 0);
             put_byte(s, 31);
             put_byte(s, 139);
             put_byte(s, 8);
+            if (s->gzhead == NULL) {
                 put_byte(s, 0);
                 put_byte(s, 0);
                 put_byte(s, 0);
@@ -559,9 +590,34 @@ int ZEXPORT deflate (strm, flush)
                 put_byte(s, s->level == 9 ? 2 :
                             (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
                              4 : 0));
-            put_byte(s, 255);
+                put_byte(s, OS_CODE);
                 s->status = BUSY_STATE;
-            strm->adler = crc32(0L, Z_NULL, 0);
+            }
+            else {
+                put_byte(s, (s->gzhead->text ? 1 : 0) +
+                            (s->gzhead->hcrc ? 2 : 0) +
+                            (s->gzhead->extra == Z_NULL ? 0 : 4) +
+                            (s->gzhead->name == Z_NULL ? 0 : 8) +
+                            (s->gzhead->comment == Z_NULL ? 0 : 16)
+                        );
+                put_byte(s, s->gzhead->time & 0xff);
+                put_byte(s, (s->gzhead->time >> 8) & 0xff);
+                put_byte(s, (s->gzhead->time >> 16) & 0xff);
+                put_byte(s, (s->gzhead->time >> 24) & 0xff);
+                put_byte(s, s->level == 9 ? 2 :
+                            (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
+                             4 : 0));
+                put_byte(s, s->gzhead->os & 0xff);
+                if (s->gzhead->extra != NULL) {
+                    put_byte(s, s->gzhead->extra_len & 0xff);
+                    put_byte(s, (s->gzhead->extra_len >> 8) & 0xff);
+                }
+                if (s->gzhead->hcrc)
+                    strm->adler = crc32(strm->adler, s->pending_buf,
+                                        s->pending);
+                s->gzindex = 0;
+                s->status = EXTRA_STATE;
+            }
         }
         else
 #endif
@@ -592,6 +648,110 @@ int ZEXPORT deflate (strm, flush)
             strm->adler = adler32(0L, Z_NULL, 0);
         }
     }
+#ifdef GZIP
+    if (s->status == EXTRA_STATE) {
+        if (s->gzhead->extra != NULL) {
+            int beg = s->pending;   /* start of bytes to update crc */
+
+            while (s->gzindex < (s->gzhead->extra_len & 0xffff)) {
+                if (s->pending == s->pending_buf_size) {
+                    if (s->gzhead->hcrc && s->pending > beg)
+                        strm->adler = crc32(strm->adler, s->pending_buf + beg,
+                                            s->pending - beg);
+                    flush_pending(strm);
+                    beg = s->pending;
+                    if (s->pending == s->pending_buf_size)
+                        break;
+                }
+                put_byte(s, s->gzhead->extra[s->gzindex]);
+                s->gzindex++;
+            }
+            if (s->gzhead->hcrc && s->pending > beg)
+                strm->adler = crc32(strm->adler, s->pending_buf + beg,
+                                    s->pending - beg);
+            if (s->gzindex == s->gzhead->extra_len) {
+                s->gzindex = 0;
+                s->status = NAME_STATE;
+            }
+        }
+        else
+            s->status = NAME_STATE;
+    }
+    if (s->status == NAME_STATE) {
+        if (s->gzhead->name != NULL) {
+            int beg = s->pending;   /* start of bytes to update crc */
+            int val;
+
+            do {
+                if (s->pending == s->pending_buf_size) {
+                    if (s->gzhead->hcrc && s->pending > beg)
+                        strm->adler = crc32(strm->adler, s->pending_buf + beg,
+                                            s->pending - beg);
+                    flush_pending(strm);
+                    beg = s->pending;
+                    if (s->pending == s->pending_buf_size) {
+                        val = 1;
+                        break;
+                    }
+                }
+                val = s->gzhead->name[s->gzindex++];
+                put_byte(s, val);
+            } while (val != 0);
+            if (s->gzhead->hcrc && s->pending > beg)
+                strm->adler = crc32(strm->adler, s->pending_buf + beg,
+                                    s->pending - beg);
+            if (val == 0) {
+                s->gzindex = 0;
+                s->status = COMMENT_STATE;
+            }
+        }
+        else
+            s->status = COMMENT_STATE;
+    }
+    if (s->status == COMMENT_STATE) {
+        if (s->gzhead->comment != NULL) {
+            int beg = s->pending;   /* start of bytes to update crc */
+            int val;
+
+            do {
+                if (s->pending == s->pending_buf_size) {
+                    if (s->gzhead->hcrc && s->pending > beg)
+                        strm->adler = crc32(strm->adler, s->pending_buf + beg,
+                                            s->pending - beg);
+                    flush_pending(strm);
+                    beg = s->pending;
+                    if (s->pending == s->pending_buf_size) {
+                        val = 1;
+                        break;
+                    }
+                }
+                val = s->gzhead->comment[s->gzindex++];
+                put_byte(s, val);
+            } while (val != 0);
+            if (s->gzhead->hcrc && s->pending > beg)
+                strm->adler = crc32(strm->adler, s->pending_buf + beg,
+                                    s->pending - beg);
+            if (val == 0)
+                s->status = HCRC_STATE;
+        }
+        else
+            s->status = HCRC_STATE;
+    }
+    if (s->status == HCRC_STATE) {
+        if (s->gzhead->hcrc) {
+            if (s->pending + 2 > s->pending_buf_size)
+                flush_pending(strm);
+            if (s->pending + 2 <= s->pending_buf_size) {
+                put_byte(s, strm->adler & 0xff);
+                put_byte(s, (strm->adler >> 8) & 0xff);
+                strm->adler = crc32(0L, Z_NULL, 0);
+                s->status = BUSY_STATE;
+            }
+        }
+        else
+            s->status = BUSY_STATE;
+    }
+#endif
 
     /* Flush as much pending output as possible */
     if (s->pending != 0) {
@@ -704,7 +864,12 @@ int ZEXPORT deflateEnd (strm)
     if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
 
     status = strm->state->status;
-    if (status != INIT_STATE && status != BUSY_STATE &&
+    if (status != INIT_STATE &&
+        status != EXTRA_STATE &&
+        status != NAME_STATE &&
+        status != COMMENT_STATE &&
+        status != HCRC_STATE &&
+        status != BUSY_STATE &&
         status != FINISH_STATE) {
       return Z_STREAM_ERROR;
     }
@@ -744,12 +909,12 @@ int ZEXPORT deflateCopy (dest, source)
 
     ss = source->state;
 
-    *dest = *source;
+    zmemcpy(dest, source, sizeof(z_stream));
 
     ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
     if (ds == Z_NULL) return Z_MEM_ERROR;
     dest->state = (struct internal_state FAR *) ds;
-    *ds = *ss;
+    zmemcpy(ds, ss, sizeof(deflate_state));
     ds->strm = dest;
 
     ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
@@ -838,9 +1003,11 @@ local void lm_init (s)
     s->match_length = s->prev_length = MIN_MATCH-1;
     s->match_available = 0;
     s->ins_h = 0;
+#ifndef FASTEST
 #ifdef ASMV
     match_init(); /* initialize the asm code */
 #endif
+#endif
 }
 
 #ifndef FASTEST
@@ -909,7 +1076,12 @@ local uInt longest_match(s, cur_match)
         match = s->window + cur_match;
 
         /* Skip to next match if the match length cannot increase
-         * or if the match length is less than 2:
+         * or if the match length is less than 2.  Note that the checks below
+         * for insufficient lookahead only occur occasionally for performance
+         * reasons.  Therefore uninitialized memory will be accessed, and
+         * conditional jumps will be made that depend on those values.
+         * However the length of the match is limited to the lookahead, so
+         * the output of deflate is not affected by the uninitialized values.
          */
 #if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
         /* This code assumes sizeof(unsigned short) == 2. Do not use
@@ -1309,12 +1481,12 @@ local block_state deflate_fast(s, flush)
              * of the string with itself at the start of the input file).
              */
 #ifdef FASTEST
-            if ((s->strategy < Z_HUFFMAN_ONLY) ||
+            if ((s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) ||
                 (s->strategy == Z_RLE && s->strstart - hash_head == 1)) {
                 s->match_length = longest_match_fast (s, hash_head);
             }
 #else
-            if (s->strategy < Z_HUFFMAN_ONLY) {
+            if (s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) {
                 s->match_length = longest_match (s, hash_head);
             } else if (s->strategy == Z_RLE && s->strstart - hash_head == 1) {
                 s->match_length = longest_match_fast (s, hash_head);
@@ -1418,7 +1590,7 @@ local block_state deflate_slow(s, flush)
              * of window index 0 (in particular we have to avoid a match
              * of the string with itself at the start of the input file).
              */
-            if (s->strategy < Z_HUFFMAN_ONLY) {
+            if (s->strategy != Z_HUFFMAN_ONLY && s->strategy != Z_RLE) {
                 s->match_length = longest_match (s, hash_head);
             } else if (s->strategy == Z_RLE && s->strstart - hash_head == 1) {
                 s->match_length = longest_match_fast (s, hash_head);

deflate.h

@@ -1,5 +1,5 @@
 /* deflate.h -- internal compression state
- * Copyright (C) 1995-2002 Jean-loup Gailly
+ * Copyright (C) 1995-2004 Jean-loup Gailly
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -49,6 +49,10 @@
 /* All codes must not exceed MAX_BITS bits */
 
 #define INIT_STATE    42
+#define EXTRA_STATE   69
+#define NAME_STATE    73
+#define COMMENT_STATE 91
+#define HCRC_STATE   103
 #define BUSY_STATE   113
 #define FINISH_STATE 666
 /* Stream status */
@@ -95,7 +99,8 @@ typedef struct internal_state {
     Bytef *pending_out;  /* next pending byte to output to the stream */
     int   pending;       /* nb of bytes in the pending buffer */
     int   wrap;          /* bit 0 true for zlib, bit 1 true for gzip */
-    Byte  data_type;     /* UNKNOWN, BINARY or ASCII */
+    gz_headerp  gzhead;  /* gzip header information to write */
+    int   gzindex;       /* where in extra, name, or comment */
     Byte  method;        /* STORED (for zip only) or DEFLATED */
     int   last_flush;    /* value of flush param for previous deflate call */
 

example.c

@@ -1,5 +1,5 @@
 /* example.c -- usage example of the zlib compression library
- * Copyright (C) 1995-2003 Jean-loup Gailly.
+ * Copyright (C) 1995-2004 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -11,8 +11,6 @@
 #ifdef STDC
 #  include <string.h>
 #  include <stdlib.h>
-#else
-   extern void exit  OF((int));
 #endif
 
 #if defined(VMS) || defined(RISCOS)

examples/README.examples

@@ -0,0 +1,37 @@
+This directory contains examples of the use of zlib.
+
+fitblk.c
+    compress just enough input to nearly fill a requested output size
+    - zlib isn't designed to do this, but fitblk does it anyway
+
+gun.c
+    uncompress a gzip file
+    - illustrates the use of inflateBack() for high speed file-to-file
+      decompression using call-back functions
+    - is approximately twice as fast as gzip -d
+    - also provides Unix uncompress functionality, again twice as fast
+
+gzappend.c
+    append to a gzip file
+    - illustrates the use of the Z_BLOCK flush parameter for inflate()
+    - illustrates the use of deflatePrime() to start at any bit
+
+gzjoin.c
+    join gzip files without recalculating the crc or recompressing
+    - illustrates the use of the Z_BLOCK flush parameter for inflate()
+    - illustrates the use of crc32_combine()
+
+gzlog.c
+gzlog.h
+    efficiently maintain a message log file in gzip format
+    - illustrates use of raw deflate and Z_SYNC_FLUSH
+    - illustrates use of gzip header extra field
+
+zlib_how.html
+    painfully comprehensive description of zpipe.c (see below)
+    - describes in excruciating detail the use of deflate() and inflate()
+
+zpipe.c
+    reads and writes zlib streams from stdin to stdout
+    - illustrates the proper use of deflate() and inflate()
+    - deeply commented in zlib_how.html (see above)

examples/fitblk.c

@@ -0,0 +1,235 @@
+/* fitblk.c: example of fitting compressed output to a specified size
+   Not copyrighted -- provided to the public domain
+   Version 1.1  25 November 2004  Mark Adler */
+
+/* Version history:
+   1.0  24 Nov 2004  First version
+   1.1  25 Nov 2004  Change deflateInit2() to deflateInit()
+                     Use fixed-size, stack-allocated raw buffers
+                     Simplify code moving compression to subroutines
+                     Use assert() for internal errors
+                     Add detailed description of approach
+ */
+
+/* Approach to just fitting a requested compressed size:
+
+   fitblk performs three compression passes on a portion of the input
+   data in order to determine how much of that input will compress to
+   nearly the requested output block size.  The first pass generates
+   enough deflate blocks to produce output to fill the requested
+   output size plus a specfied excess amount (see the EXCESS define
+   below).  The last deflate block may go quite a bit past that, but
+   is discarded.  The second pass decompresses and recompresses just
+   the compressed data that fit in the requested plus excess sized
+   buffer.  The deflate process is terminated after that amount of
+   input, which is less than the amount consumed on the first pass.
+   The last deflate block of the result will be of a comparable size
+   to the final product, so that the header for that deflate block and
+   the compression ratio for that block will be about the same as in
+   the final product.  The third compression pass decompresses the
+   result of the second step, but only the compressed data up to the
+   requested size minus an amount to allow the compressed stream to
+   complete (see the MARGIN define below).  That will result in a
+   final compressed stream whose length is less than or equal to the
+   requested size.  Assuming sufficient input and a requested size
+   greater than a few hundred bytes, the shortfall will typically be
+   less than ten bytes.
+
+   If the input is short enough that the first compression completes
+   before filling the requested output size, then that compressed
+   stream is return with no recompression.
+
+   EXCESS is chosen to be just greater than the shortfall seen in a
+   two pass approach similar to the above.  That shortfall is due to
+   the last deflate block compressing more efficiently with a smaller
+   header on the second pass.  EXCESS is set to be large enough so
+   that there is enough uncompressed data for the second pass to fill
+   out the requested size, and small enough so that the final deflate
+   block of the second pass will be close in size to the final deflate
+   block of the third and final pass.  MARGIN is chosen to be just
+   large enough to assure that the final compression has enough room
+   to complete in all cases.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <assert.h>
+#include "zlib.h"
+
+#define local static
+
+/* print nastygram and leave */
+local void quit(char *why)
+{
+    fprintf(stderr, "fitblk abort: %s\n", why);
+    exit(1);
+}
+
+#define RAWLEN 4096    /* intermediate uncompressed buffer size */
+
+/* compress from file to def until provided buffer is full or end of
+   input reached; return last deflate() return value, or Z_ERRNO if
+   there was read error on the file */
+local int partcompress(FILE *in, z_streamp def)
+{
+    int ret, flush;
+    char raw[RAWLEN];
+
+    flush = Z_NO_FLUSH;
+    do {
+        def->avail_in = fread(raw, 1, RAWLEN, in);
+        if (ferror(in))
+            return Z_ERRNO;
+        def->next_in = raw;
+        if (feof(in))
+            flush = Z_FINISH;
+        ret = deflate(def, flush);
+        assert(ret != Z_STREAM_ERROR);
+    } while (def->avail_out != 0 && flush == Z_NO_FLUSH);
+    return ret;
+}
+
+/* recompress from inf's input to def's output; the input for inf and
+   the output for def are set in those structures before calling;
+   return last deflate() return value, or Z_MEM_ERROR if inflate()
+   was not able to allocate enough memory when it needed to */
+local int recompress(z_streamp inf, z_streamp def)
+{
+    int ret, flush;
+    char raw[RAWLEN];
+
+    flush = Z_NO_FLUSH;
+    do {
+        /* decompress */
+        inf->avail_out = RAWLEN;
+        inf->next_out = raw;
+        ret = inflate(inf, Z_NO_FLUSH);
+        assert(ret != Z_STREAM_ERROR && ret != Z_DATA_ERROR &&
+               ret != Z_NEED_DICT);
+        if (ret == Z_MEM_ERROR)
+            return ret;
+
+        /* compress what was decompresed until done or no room */
+        def->avail_in = RAWLEN - inf->avail_out;
+        def->next_in = raw;
+        if (inf->avail_out != 0)
+            flush = Z_FINISH;
+        ret = deflate(def, flush);
+        assert(ret != Z_STREAM_ERROR);
+    } while (ret != Z_STREAM_END && def->avail_out != 0);
+    return ret;
+}
+
+#define EXCESS 256      /* empirically determined stream overage */
+#define MARGIN 8        /* amount to back off for completion */
+
+/* compress from stdin to fixed-size block on stdout */
+int main(int argc, char **argv)
+{
+    int ret;                /* return code */
+    unsigned size;          /* requested fixed output block size */
+    unsigned have;          /* bytes written by deflate() call */
+    char *blk;              /* intermediate and final stream */
+    char *tmp;              /* close to desired size stream */
+    z_stream def, inf;      /* zlib deflate and inflate states */
+
+    /* get requested output size */
+    if (argc != 2)
+        quit("need one argument: size of output block");
+    ret = strtol(argv[1], argv + 1, 10);
+    if (argv[1][0] != 0)
+        quit("argument must be a number");
+    if (ret < 8)            /* 8 is minimum zlib stream size */
+        quit("need positive size of 8 or greater");
+    size = (unsigned)ret;
+
+    /* allocate memory for buffers and compression engine */
+    blk = malloc(size + EXCESS);
+    def.zalloc = Z_NULL;
+    def.zfree = Z_NULL;
+    def.opaque = Z_NULL;
+    ret = deflateInit(&def, Z_DEFAULT_COMPRESSION);
+    if (ret != Z_OK || blk == NULL)
+        quit("out of memory");
+
+    /* compress from stdin until output full, or no more input */
+    def.avail_out = size + EXCESS;
+    def.next_out = blk;
+    ret = partcompress(stdin, &def);
+    if (ret == Z_ERRNO)
+        quit("error reading input");
+
+    /* if it all fit, then size was undersubscribed -- done! */
+    if (ret == Z_STREAM_END && def.avail_out >= EXCESS) {
+        /* write block to stdout */
+        have = size + EXCESS - def.avail_out;
+        ret = fwrite(blk, 1, have, stdout);
+        if (ret != have || ferror(stdout))
+            quit("error writing output");
+
+        /* clean up and print results to stderr */
+        ret = deflateEnd(&def);
+        assert(ret != Z_STREAM_ERROR);
+        free(blk);
+        fprintf(stderr,
+                "%u bytes unused out of %u requested (all input)\n",
+                size - have, size);
+        return 0;
+    }
+
+    /* it didn't all fit -- set up for recompression */
+    inf.zalloc = Z_NULL;
+    inf.zfree = Z_NULL;
+    inf.opaque = Z_NULL;
+    inf.avail_in = 0;
+    inf.next_in = Z_NULL;
+    ret = inflateInit(&inf);
+    tmp = malloc(size + EXCESS);
+    if (ret != Z_OK || tmp == NULL)
+        quit("out of memory");
+    ret = deflateReset(&def);
+    assert(ret != Z_STREAM_ERROR);
+
+    /* do first recompression close to the right amount */
+    inf.avail_in = size + EXCESS;
+    inf.next_in = blk;
+    def.avail_out = size + EXCESS;
+    def.next_out = tmp;
+    ret = recompress(&inf, &def);
+    if (ret == Z_MEM_ERROR)
+        quit("out of memory");
+
+    /* set up for next reocmpression */
+    ret = inflateReset(&inf);
+    assert(ret != Z_STREAM_ERROR);
+    ret = deflateReset(&def);
+    assert(ret != Z_STREAM_ERROR);
+
+    /* do second and final recompression (third compression) */
+    inf.avail_in = size - MARGIN;   /* assure stream will complete */
+    inf.next_in = tmp;
+    def.avail_out = size;
+    def.next_out = blk;
+    ret = recompress(&inf, &def);
+    if (ret == Z_MEM_ERROR)
+        quit("out of memory");
+    assert(ret == Z_STREAM_END);    /* otherwise MARGIN too small */
+
+    /* done -- write block to stdout */
+    have = size - def.avail_out;
+    ret = fwrite(blk, 1, have, stdout);
+    if (ret != have || ferror(stdout))
+        quit("error writing output");
+
+    /* clean up and print results to stderr */
+    free(tmp);
+    ret = inflateEnd(&inf);
+    assert(ret != Z_STREAM_ERROR);
+    ret = deflateEnd(&def);
+    assert(ret != Z_STREAM_ERROR);
+    free(blk);
+    fprintf(stderr,
+            "%u bytes unused out of %u requested (%lu input)\n",
+            size - have, size, def.total_in);
+    return 0;
+}

examples/gun.c

@@ -0,0 +1,692 @@
+/* gun.c -- simple gunzip to give an example of the use of inflateBack()
+ * Copyright (C) 2003, 2005 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+   Version 1.2  20 March 2005  Mark Adler */
+
+/* Version history:
+   1.0  16 Feb 2003  First version for testing of inflateBack()
+   1.1  21 Feb 2005  Decompress concatenated gzip streams
+                     Remove use of "this" variable (C++ keyword)
+                     Fix return value for in()
+                     Improve allocation failure checking
+                     Add typecasting for void * structures
+                     Add -h option for command version and usage
+                     Add a bunch of comments
+   1.2  20 Mar 2005  Add Unix compress (LZW) decompression
+                     Copy file attributes from input file to output file
+ */
+
+/*
+   gun [ -t ] [ name ... ]
+
+   decompresses the data in the named gzip files.  If no arguments are given,
+   gun will decompress from stdin to stdout.  The names must end in .gz, -gz,
+   .z, -z, _z, or .Z.  The uncompressed data will be written to a file name
+   with the suffix stripped.  On success, the original file is deleted.  On
+   failure, the output file is deleted.  For most failures, the command will
+   continue to process the remaining names on the command line.  A memory
+   allocation failure will abort the command.  If -t is specified, then the
+   listed files or stdin will be tested as gzip files for integrity (without
+   checking for a proper suffix), no output will be written, and no files
+   will be deleted.
+
+   Like gzip, gun allows concatenated gzip streams and will decompress them,
+   writing all of the uncompressed data to the output.  Unlike gzip, gun allows
+   an empty file on input, and will produce no error writing an empty output
+   file.
+
+   gun will also decompress files made by Unix compress, which uses LZW
+   compression.  These files are automatically detected by virtue of their
+   magic header bytes.  Since the end of Unix compress stream is marked by the
+   end-of-file, they cannot be concantenated.  If a Unix compress stream is
+   encountered in an input file, it is the last stream in that file.
+
+   Like gunzip and uncompress, the file attributes of the orignal compressed
+   file are maintained in the final uncompressed file, to the extent that the
+   user permissions allow it.
+
+   On my Mac OS X PowerPC G4, gun is almost twice as fast as gunzip (version
+   1.2.4) is on the same file, when gun is linked with zlib 1.2.2.  Also the
+   LZW decompression provided by gun is about twice as fast as the standard
+   Unix uncompress command.
+ */
+
+/* external functions and related types and constants */
+#include <stdio.h>          /* fprintf() */
+#include <stdlib.h>         /* malloc(), free() */
+#include <string.h>         /* strerror(), strcmp(), strlen(), memcpy() */
+#include <errno.h>          /* errno */
+#include <fcntl.h>          /* open() */
+#include <unistd.h>         /* read(), write(), close(), chown(), unlink() */
+#include <sys/types.h>
+#include <sys/stat.h>       /* stat(), chmod() */
+#include <utime.h>          /* utime() */
+#include "zlib.h"           /* inflateBackInit(), inflateBack(), */
+                            /* inflateBackEnd(), crc32() */
+
+/* function declaration */
+#define local static
+
+/* buffer constants */
+#define SIZE 32768U         /* input and output buffer sizes */
+#define PIECE 16384         /* limits i/o chunks for 16-bit int case */
+
+/* structure for infback() to pass to input function in() -- it maintains the
+   input file and a buffer of size SIZE */
+struct ind {
+    int infile;
+    unsigned char *inbuf;
+};
+
+/* Load input buffer, assumed to be empty, and return bytes loaded and a
+   pointer to them.  read() is called until the buffer is full, or until it
+   returns end-of-file or error.  Return 0 on error. */
+local unsigned in(void *in_desc, unsigned char **buf)
+{
+    int ret;
+    unsigned len;
+    unsigned char *next;
+    struct ind *me = (struct ind *)in_desc;
+
+    next = me->inbuf;
+    *buf = next;
+    len = 0;
+    do {
+        ret = PIECE;
+        if ((unsigned)ret > SIZE - len)
+            ret = (int)(SIZE - len);
+        ret = (int)read(me->infile, next, ret);
+        if (ret == -1) {
+            len = 0;
+            break;
+        }
+        next += ret;
+        len += ret;
+    } while (ret != 0 && len < SIZE);
+    return len;
+}
+
+/* structure for infback() to pass to output function out() -- it maintains the
+   output file, a running CRC-32 check on the output and the total number of
+   bytes output, both for checking against the gzip trailer.  (The length in
+   the gzip trailer is stored modulo 2^32, so it's ok if a long is 32 bits and
+   the output is greater than 4 GB.) */
+struct outd {
+    int outfile;
+    int check;                  /* true if checking crc and total */
+    unsigned long crc;
+    unsigned long total;
+};
+
+/* Write output buffer and update the CRC-32 and total bytes written.  write()
+   is called until all of the output is written or an error is encountered.
+   On success out() returns 0.  For a write failure, out() returns 1.  If the
+   output file descriptor is -1, then nothing is written.
+ */
+local int out(void *out_desc, unsigned char *buf, unsigned len)
+{
+    int ret;
+    struct outd *me = (struct outd *)out_desc;
+
+    if (me->check) {
+        me->crc = crc32(me->crc, buf, len);
+        me->total += len;
+    }
+    if (me->outfile != -1)
+        do {
+            ret = PIECE;
+            if ((unsigned)ret > len)
+                ret = (int)len;
+            ret = (int)write(me->outfile, buf, ret);
+            if (ret == -1)
+                return 1;
+            buf += ret;
+            len -= ret;
+        } while (len != 0);
+    return 0;
+}
+
+/* next input byte macro for use inside lunpipe() and gunpipe() */
+#define NEXT() (have ? 0 : (have = in(indp, &next)), \
+                last = have ? (have--, (int)(*next++)) : -1)
+
+/* memory for gunpipe() and lunpipe() --
+   the first 256 entries of prefix[] and suffix[] are never used, could
+   have offset the index, but it's faster to waste the memory */
+unsigned char inbuf[SIZE];              /* input buffer */
+unsigned char outbuf[SIZE];             /* output buffer */
+unsigned short prefix[65536];           /* index to LZW prefix string */
+unsigned char suffix[65536];            /* one-character LZW suffix */
+unsigned char match[65280 + 2];         /* buffer for reversed match or gzip
+                                           32K sliding window */
+
+/* throw out what's left in the current bits byte buffer (this is a vestigial
+   aspect of the compressed data format derived from an implementation that
+   made use of a special VAX machine instruction!) */
+#define FLUSHCODE() \
+    do { \
+        left = 0; \
+        rem = 0; \
+        if (chunk > have) { \
+            chunk -= have; \
+            have = 0; \
+            if (NEXT() == -1) \
+                break; \
+            chunk--; \
+            if (chunk > have) { \
+                chunk = have = 0; \
+                break; \
+            } \
+        } \
+        have -= chunk; \
+        next += chunk; \
+        chunk = 0; \
+    } while (0)
+
+/* Decompress a compress (LZW) file from indp to outfile.  The compress magic
+   header (two bytes) has already been read and verified.  There are have bytes
+   of buffered input at next.  strm is used for passing error information back
+   to gunpipe().
+
+   lunpipe() will return Z_OK on success, Z_BUF_ERROR for an unexpected end of
+   file, read error, or write error (a write error indicated by strm->next_in
+   not equal to Z_NULL), or Z_DATA_ERROR for invalid input.
+ */
+local int lunpipe(unsigned have, unsigned char *next, struct ind *indp,
+                  int outfile, z_stream *strm)
+{
+    int last;                   /* last byte read by NEXT(), or -1 if EOF */
+    int chunk;                  /* bytes left in current chunk */
+    int left;                   /* bits left in rem */
+    unsigned rem;               /* unused bits from input */
+    int bits;                   /* current bits per code */
+    unsigned code;              /* code, table traversal index */
+    unsigned mask;              /* mask for current bits codes */
+    int max;                    /* maximum bits per code for this stream */
+    int flags;                  /* compress flags, then block compress flag */
+    unsigned end;               /* last valid entry in prefix/suffix tables */
+    unsigned temp;              /* current code */
+    unsigned prev;              /* previous code */
+    unsigned final;             /* last character written for previous code */
+    unsigned stack;             /* next position for reversed string */
+    unsigned outcnt;            /* bytes in output buffer */
+    struct outd outd;           /* output structure */
+
+    /* set up output */
+    outd.outfile = outfile;
+    outd.check = 0;
+
+    /* process remainder of compress header -- a flags byte */
+    flags = NEXT();
+    if (last == -1)
+        return Z_BUF_ERROR;
+    if (flags & 0x60) {
+        strm->msg = "unknown lzw flags set";
+        return Z_DATA_ERROR;
+    }
+    max = flags & 0x1f;
+    if (max < 9 || max > 16) {
+        strm->msg = "lzw bits out of range";
+        return Z_DATA_ERROR;
+    }
+    if (max == 9)                           /* 9 doesn't really mean 9 */
+        max = 10;
+    flags &= 0x80;                          /* true if block compress */
+
+    /* clear table */
+    bits = 9;
+    mask = 0x1ff;
+    end = flags ? 256 : 255;
+
+    /* set up: get first 9-bit code, which is the first decompressed byte, but
+       don't create a table entry until the next code */
+    if (NEXT() == -1)                       /* no compressed data is ok */
+        return Z_OK;
+    final = prev = (unsigned)last;          /* low 8 bits of code */
+    if (NEXT() == -1)                       /* missing a bit */
+        return Z_BUF_ERROR;
+    if (last & 1) {                         /* code must be < 256 */
+        strm->msg = "invalid lzw code";
+        return Z_DATA_ERROR;
+    }
+    rem = (unsigned)last >> 1;              /* remaining 7 bits */
+    left = 7;
+    chunk = bits - 2;                       /* 7 bytes left in this chunk */
+    outbuf[0] = (unsigned char)final;       /* write first decompressed byte */
+    outcnt = 1;
+
+    /* decode codes */
+    stack = 0;
+    for (;;) {
+        /* if the table will be full after this, increment the code size */
+        if (end >= mask && bits < max) {
+            FLUSHCODE();
+            bits++;
+            mask <<= 1;
+            mask++;
+        }
+
+        /* get a code of length bits */
+        if (chunk == 0)                     /* decrement chunk modulo bits */
+            chunk = bits;
+        code = rem;                         /* low bits of code */
+        if (NEXT() == -1) {                 /* EOF is end of compressed data */
+            /* write remaining buffered output */
+            if (outcnt && out(&outd, outbuf, outcnt)) {
+                strm->next_in = outbuf;     /* signal write error */
+                return Z_BUF_ERROR;
+            }
+            return Z_OK;
+        }
+        code += (unsigned)last << left;     /* middle (or high) bits of code */
+        left += 8;
+        chunk--;
+        if (bits > left) {                  /* need more bits */
+            if (NEXT() == -1)               /* can't end in middle of code */
+                return Z_BUF_ERROR;
+            code += (unsigned)last << left; /* high bits of code */
+            left += 8;
+            chunk--;
+        }
+        code &= mask;                       /* mask to current code length */
+        left -= bits;                       /* number of unused bits */
+        rem = (unsigned)last >> (8 - left); /* unused bits from last byte */
+
+        /* process clear code (256) */
+        if (code == 256 && flags) {
+            FLUSHCODE();
+            bits = 9;                       /* initialize bits and mask */
+            mask = 0x1ff;
+            end = 255;                      /* empty table */
+            continue;                       /* get next code */
+        }
+
+        /* special code to reuse last match */
+        temp = code;                        /* save the current code */
+        if (code > end) {
+            /* Be picky on the allowed code here, and make sure that the code
+               we drop through (prev) will be a valid index so that random
+               input does not cause an exception.  The code != end + 1 check is
+               empirically derived, and not checked in the original uncompress
+               code.  If this ever causes a problem, that check could be safely
+               removed.  Leaving this check in greatly improves gun's ability
+               to detect random or corrupted input after a compress header.
+               In any case, the prev > end check must be retained. */
+            if (code != end + 1 || prev > end) {
+                strm->msg = "invalid lzw code";
+                return Z_DATA_ERROR;
+            }
+            match[stack++] = (unsigned char)final;
+            code = prev;
+        }
+
+        /* walk through linked list to generate output in reverse order */
+        while (code >= 256) {
+            match[stack++] = suffix[code];
+            code = prefix[code];
+        }
+        match[stack++] = (unsigned char)code;
+        final = code;
+
+        /* link new table entry */
+        if (end < mask) {
+            end++;
+            prefix[end] = (unsigned short)prev;
+            suffix[end] = (unsigned char)final;
+        }
+
+        /* set previous code for next iteration */
+        prev = temp;
+
+        /* write output in forward order */
+        while (stack > SIZE - outcnt) {
+            while (outcnt < SIZE)
+                outbuf[outcnt++] = match[--stack];
+            if (out(&outd, outbuf, outcnt)) {
+                strm->next_in = outbuf; /* signal write error */
+                return Z_BUF_ERROR;
+            }
+            outcnt = 0;
+        }
+        do {
+            outbuf[outcnt++] = match[--stack];
+        } while (stack);
+
+        /* loop for next code with final and prev as the last match, rem and
+           left provide the first 0..7 bits of the next code, end is the last
+           valid table entry */
+    }
+}
+
+/* Decompress a gzip file from infile to outfile.  strm is assumed to have been
+   successfully initialized with inflateBackInit().  The input file may consist
+   of a series of gzip streams, in which case all of them will be decompressed
+   to the output file.  If outfile is -1, then the gzip stream(s) integrity is
+   checked and nothing is written.
+
+   The return value is a zlib error code: Z_MEM_ERROR if out of memory,
+   Z_DATA_ERROR if the header or the compressed data is invalid, or if the
+   trailer CRC-32 check or length doesn't match, Z_BUF_ERROR if the input ends
+   prematurely or a write error occurs, or Z_ERRNO if junk (not a another gzip
+   stream) follows a valid gzip stream.
+ */
+local int gunpipe(z_stream *strm, int infile, int outfile)
+{
+    int ret, first, last;
+    unsigned have, flags, len;
+    unsigned char *next;
+    struct ind ind, *indp;
+    struct outd outd;
+
+    /* setup input buffer */
+    ind.infile = infile;
+    ind.inbuf = inbuf;
+    indp = &ind;
+
+    /* decompress concatenated gzip streams */
+    have = 0;                               /* no input data read in yet */
+    first = 1;                              /* looking for first gzip header */
+    strm->next_in = Z_NULL;                 /* so Z_BUF_ERROR means EOF */
+    for (;;) {
+        /* look for the two magic header bytes for a gzip stream */
+        if (NEXT() == -1) {
+            ret = Z_OK;
+            break;                          /* empty gzip stream is ok */
+        }
+        if (last != 31 || (NEXT() != 139 && last != 157)) {
+            strm->msg = "incorrect header check";
+            ret = first ? Z_DATA_ERROR : Z_ERRNO;
+            break;                          /* not a gzip or compress header */
+        }
+        first = 0;                          /* next non-header is junk */
+
+        /* process a compress (LZW) file -- can't be concatenated after this */
+        if (last == 157) {
+            ret = lunpipe(have, next, indp, outfile, strm);
+            break;
+        }
+
+        /* process remainder of gzip header */
+        ret = Z_BUF_ERROR;
+        if (NEXT() != 8) {                  /* only deflate method allowed */
+            if (last == -1) break;
+            strm->msg = "unknown compression method";
+            ret = Z_DATA_ERROR;
+            break;
+        }
+        flags = NEXT();                     /* header flags */
+        NEXT();                             /* discard mod time, xflgs, os */
+        NEXT();
+        NEXT();
+        NEXT();
+        NEXT();
+        NEXT();
+        if (last == -1) break;
+        if (flags & 0xe0) {
+            strm->msg = "unknown header flags set";
+            ret = Z_DATA_ERROR;
+            break;
+        }
+        if (flags & 4) {                    /* extra field */
+            len = NEXT();
+            len += (unsigned)(NEXT()) << 8;
+            if (last == -1) break;
+            while (len > have) {
+                len -= have;
+                have = 0;
+                if (NEXT() == -1) break;
+                len--;
+            }
+            if (last == -1) break;
+            have -= len;
+            next += len;
+        }
+        if (flags & 8)                      /* file name */
+            while (NEXT() != 0 && last != -1)
+                ;
+        if (flags & 16)                     /* comment */
+            while (NEXT() != 0 && last != -1)
+                ;
+        if (flags & 2) {                    /* header crc */
+            NEXT();
+            NEXT();
+        }
+        if (last == -1) break;
+
+        /* set up output */
+        outd.outfile = outfile;
+        outd.check = 1;
+        outd.crc = crc32(0L, Z_NULL, 0);
+        outd.total = 0;
+
+        /* decompress data to output */
+        strm->next_in = next;
+        strm->avail_in = have;
+        ret = inflateBack(strm, in, indp, out, &outd);
+        if (ret != Z_STREAM_END) break;
+        next = strm->next_in;
+        have = strm->avail_in;
+        strm->next_in = Z_NULL;             /* so Z_BUF_ERROR means EOF */
+
+        /* check trailer */
+        ret = Z_BUF_ERROR;
+        if (NEXT() != (outd.crc & 0xff) ||
+            NEXT() != ((outd.crc >> 8) & 0xff) ||
+            NEXT() != ((outd.crc >> 16) & 0xff) ||
+            NEXT() != ((outd.crc >> 24) & 0xff)) {
+            /* crc error */
+            if (last != -1) {
+                strm->msg = "incorrect data check";
+                ret = Z_DATA_ERROR;
+            }
+            break;
+        }
+        if (NEXT() != (outd.total & 0xff) ||
+            NEXT() != ((outd.total >> 8) & 0xff) ||
+            NEXT() != ((outd.total >> 16) & 0xff) ||
+            NEXT() != ((outd.total >> 24) & 0xff)) {
+            /* length error */
+            if (last != -1) {
+                strm->msg = "incorrect length check";
+                ret = Z_DATA_ERROR;
+            }
+            break;
+        }
+
+        /* go back and look for another gzip stream */
+    }
+
+    /* clean up and return */
+    return ret;
+}
+
+/* Copy file attributes, from -> to, as best we can.  This is best effort, so
+   no errors are reported.  The mode bits, including suid, sgid, and the sticky
+   bit are copied (if allowed), the owner's user id and group id are copied
+   (again if allowed), and the access and modify times are copied. */
+local void copymeta(char *from, char *to)
+{
+    struct stat was;
+    struct utimbuf when;
+
+    /* get all of from's Unix meta data, return if not a regular file */
+    if (stat(from, &was) != 0 || (was.st_mode & S_IFMT) != S_IFREG)
+        return;
+
+    /* set to's mode bits, ignore errors */
+    (void)chmod(to, was.st_mode & 07777);
+
+    /* copy owner's user and group, ignore errors */
+    (void)chown(to, was.st_uid, was.st_gid);
+
+    /* copy access and modify times, ignore errors */
+    when.actime = was.st_atime;
+    when.modtime = was.st_mtime;
+    (void)utime(to, &when);
+}
+
+/* Decompress the file inname to the file outnname, of if test is true, just
+   decompress without writing and check the gzip trailer for integrity.  If
+   inname is NULL or an empty string, read from stdin.  If outname is NULL or
+   an empty string, write to stdout.  strm is a pre-initialized inflateBack
+   structure.  When appropriate, copy the file attributes from inname to
+   outname.
+
+   gunzip() returns 1 if there is an out-of-memory error or an unexpected
+   return code from gunpipe().  Otherwise it returns 0.
+ */
+local int gunzip(z_stream *strm, char *inname, char *outname, int test)
+{
+    int ret;
+    int infile, outfile;
+
+    /* open files */
+    if (inname == NULL || *inname == 0) {
+        inname = "-";
+        infile = 0;     /* stdin */
+    }
+    else {
+        infile = open(inname, O_RDONLY, 0);
+        if (infile == -1) {
+            fprintf(stderr, "gun cannot open %s\n", inname);
+            return 0;
+        }
+    }
+    if (test)
+        outfile = -1;
+    else if (outname == NULL || *outname == 0) {
+        outname = "-";
+        outfile = 1;    /* stdout */
+    }
+    else {
+        outfile = open(outname, O_CREAT | O_TRUNC | O_WRONLY, 0666);
+        if (outfile == -1) {
+            close(infile);
+            fprintf(stderr, "gun cannot create %s\n", outname);
+            return 0;
+        }
+    }
+    errno = 0;
+
+    /* decompress */
+    ret = gunpipe(strm, infile, outfile);
+    if (outfile > 2) close(outfile);
+    if (infile > 2) close(infile);
+
+    /* interpret result */
+    switch (ret) {
+    case Z_OK:
+    case Z_ERRNO:
+        if (infile > 2 && outfile > 2) {
+            copymeta(inname, outname);          /* copy attributes */
+            unlink(inname);
+        }
+        if (ret == Z_ERRNO)
+            fprintf(stderr, "gun warning: trailing garbage ignored in %s\n",
+                    inname);
+        break;
+    case Z_DATA_ERROR:
+        if (outfile > 2) unlink(outname);
+        fprintf(stderr, "gun data error on %s: %s\n", inname, strm->msg);
+        break;
+    case Z_MEM_ERROR:
+        if (outfile > 2) unlink(outname);
+        fprintf(stderr, "gun out of memory error--aborting\n");
+        return 1;
+    case Z_BUF_ERROR:
+        if (outfile > 2) unlink(outname);
+        if (strm->next_in != Z_NULL) {
+            fprintf(stderr, "gun write error on %s: %s\n",
+                    outname, strerror(errno));
+        }
+        else if (errno) {
+            fprintf(stderr, "gun read error on %s: %s\n",
+                    inname, strerror(errno));
+        }
+        else {
+            fprintf(stderr, "gun unexpected end of file on %s\n",
+                    inname);
+        }
+        break;
+    default:
+        if (outfile > 2) unlink(outname);
+        fprintf(stderr, "gun internal error--aborting\n");
+        return 1;
+    }
+    return 0;
+}
+
+/* Process the gun command line arguments.  See the command syntax near the
+   beginning of this source file. */
+int main(int argc, char **argv)
+{
+    int ret, len, test;
+    char *outname;
+    unsigned char *window;
+    z_stream strm;
+
+    /* initialize inflateBack state for repeated use */
+    window = match;                         /* reuse LZW match buffer */
+    strm.zalloc = Z_NULL;
+    strm.zfree = Z_NULL;
+    strm.opaque = Z_NULL;
+    ret = inflateBackInit(&strm, 15, window);
+    if (ret != Z_OK) {
+        fprintf(stderr, "gun out of memory error--aborting\n");
+        return 1;
+    }
+
+    /* decompress each file to the same name with the suffix removed */
+    argc--;
+    argv++;
+    test = 0;
+    if (argc && strcmp(*argv, "-h") == 0) {
+        fprintf(stderr, "gun 1.2 (20 Mar 2005)\n");
+        fprintf(stderr, "Copyright (c) 2005 Mark Adler\n");
+        fprintf(stderr, "usage: gun [-t] [file1.gz [file2.Z ...]]\n");
+        return 0;
+    }
+    if (argc && strcmp(*argv, "-t") == 0) {
+        test = 1;
+        argc--;
+        argv++;
+    }
+    if (argc)
+        do {
+            if (test)
+                outname = NULL;
+            else {
+                len = (int)strlen(*argv);
+                if (strcmp(*argv + len - 3, ".gz") == 0 ||
+                    strcmp(*argv + len - 3, "-gz") == 0)
+                    len -= 3;
+                else if (strcmp(*argv + len - 2, ".z") == 0 ||
+                    strcmp(*argv + len - 2, "-z") == 0 ||
+                    strcmp(*argv + len - 2, "_z") == 0 ||
+                    strcmp(*argv + len - 2, ".Z") == 0)
+                    len -= 2;
+                else {
+                    fprintf(stderr, "gun error: no gz type on %s--skipping\n",
+                            *argv);
+                    continue;
+                }
+                outname = malloc(len + 1);
+                if (outname == NULL) {
+                    fprintf(stderr, "gun out of memory error--aborting\n");
+                    ret = 1;
+                    break;
+                }
+                memcpy(outname, *argv, len);
+                outname[len] = 0;
+            }
+            ret = gunzip(&strm, *argv, outname, test);
+            if (outname != NULL) free(outname);
+            if (ret) break;
+        } while (argv++, --argc);
+    else
+        ret = gunzip(&strm, NULL, NULL, test);
+
+    /* clean up */
+    inflateBackEnd(&strm);
+    return ret;
+}

examples/gzappend.c

@@ -48,10 +48,10 @@
    unfriendly behavior that if gzappend fails, the gzip file is corrupted.
 
    This program was written to illustrate the use of the new Z_BLOCK option of
-   zlib 1.2.1's inflate() function.  This option returns from inflate() at each
+   zlib 1.2.x's inflate() function.  This option returns from inflate() at each
    block boundary to facilitate locating and modifying the last block bit at
    the start of the final deflate block.  Also whether using Z_BLOCK or not,
-   another required feature of zlib 1.2.1 is that inflate() now provides the
+   another required feature of zlib 1.2.x is that inflate() now provides the
    number of unusued bits in the last input byte used.  gzappend will not work
    with versions of zlib earlier than 1.2.1.
 

examples/gzjoin.c

@@ -0,0 +1,447 @@
+/* gzjoin -- command to join gzip files into one gzip file
+
+  Copyright (C) 2004 Mark Adler, all rights reserved
+  version 1.0, 11 Dec 2004
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the author be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  Mark Adler    madler@alumni.caltech.edu
+ */
+
+/*
+ * Change history:
+ *
+ * 1.0  11 Dec 2004     - First version
+ */
+
+/*
+   gzjoin takes one or more gzip files on the command line and writes out a
+   single gzip file that will uncompress to the concatenation of the
+   uncompressed data from the individual gzip files.  gzjoin does this without
+   having to recompress any of the data and without having to calculate a new
+   crc32 for the concatenated uncompressed data.  gzjoin does however have to
+   decompress all of the input data in order to find the bits in the compressed
+   data that need to be modified to concatenate the streams.
+
+   gzjoin does not do an integrity check on the input gzip files other than
+   checking the gzip header and decompressing the compressed data.  They are
+   otherwise assumed to be complete and correct.
+
+   Each joint between gzip files removes at least 18 bytes of previous trailer
+   and subsequent header, and inserts an average of about three bytes to the
+   compressed data in order to connect the streams.  The output gzip file
+   has a minimal ten-byte gzip header with no file name or modification time.
+
+   This program was written to illustrate the use of the Z_BLOCK option of
+   inflate() and the crc32_combine() function.  gzjoin will not compile with
+   versions of zlib earlier than 1.2.3.
+ */
+
+#include <stdio.h>      /* fputs(), fprintf(), fwrite(), putc() */
+#include <stdlib.h>     /* exit(), malloc(), free() */
+#include <fcntl.h>      /* open() */
+#include <unistd.h>     /* close(), read(), lseek() */
+#include "zlib.h"
+    /* crc32(), crc32_combine(), inflateInit2(), inflate(), inflateEnd() */
+
+#define local static
+
+/* exit with an error (return a value to allow use in an expression) */
+local int bail(char *why1, char *why2)
+{
+    fprintf(stderr, "gzjoin error: %s%s, output incomplete\n", why1, why2);
+    exit(1);
+    return 0;
+}
+
+/* -- simple buffered file input with access to the buffer -- */
+
+#define CHUNK 32768         /* must be a power of two and fit in unsigned */
+
+/* bin buffered input file type */
+typedef struct {
+    char *name;             /* name of file for error messages */
+    int fd;                 /* file descriptor */
+    unsigned left;          /* bytes remaining at next */
+    unsigned char *next;    /* next byte to read */
+    unsigned char *buf;     /* allocated buffer of length CHUNK */
+} bin;
+
+/* close a buffered file and free allocated memory */
+local void bclose(bin *in)
+{
+    if (in != NULL) {
+        if (in->fd != -1)
+            close(in->fd);
+        if (in->buf != NULL)
+            free(in->buf);
+        free(in);
+    }
+}
+
+/* open a buffered file for input, return a pointer to type bin, or NULL on
+   failure */
+local bin *bopen(char *name)
+{
+    bin *in;
+
+    in = malloc(sizeof(bin));
+    if (in == NULL)
+        return NULL;
+    in->buf = malloc(CHUNK);
+    in->fd = open(name, O_RDONLY, 0);
+    if (in->buf == NULL || in->fd == -1) {
+        bclose(in);
+        return NULL;
+    }
+    in->left = 0;
+    in->next = in->buf;
+    in->name = name;
+    return in;
+}
+
+/* load buffer from file, return -1 on read error, 0 or 1 on success, with
+   1 indicating that end-of-file was reached */
+local int bload(bin *in)
+{
+    ssize_t len;
+
+    if (in == NULL)
+        return -1;
+    if (in->left != 0)
+        return 0;
+    in->next = in->buf;
+    do {
+        len = read(in->fd, in->buf + in->left, CHUNK - in->left);
+        if (len < 0)
+            return -1;
+        in->left += (unsigned)len;
+    } while (len != 0 && in->left < CHUNK);
+    return len == 0 ? 1 : 0;
+}
+
+/* get a byte from the file, bail if end of file */
+#define bget(in) (in->left ? 0 : bload(in), \
+                  in->left ? (in->left--, *(in->next)++) : \
+                    bail("unexpected end of file on ", in->name))
+
+/* get a four-byte little-endian unsigned integer from file */
+local unsigned long bget4(bin *in)
+{
+    unsigned long val;
+
+    val = bget(in);
+    val += (unsigned long)(bget(in)) << 8;
+    val += (unsigned long)(bget(in)) << 16;
+    val += (unsigned long)(bget(in)) << 24;
+    return val;
+}
+
+/* skip bytes in file */
+local void bskip(bin *in, unsigned skip)
+{
+    /* check pointer */
+    if (in == NULL)
+        return;
+
+    /* easy case -- skip bytes in buffer */
+    if (skip <= in->left) {
+        in->left -= skip;
+        in->next += skip;
+        return;
+    }
+
+    /* skip what's in buffer, discard buffer contents */
+    skip -= in->left;
+    in->left = 0;
+
+    /* seek past multiples of CHUNK bytes */
+    if (skip > CHUNK) {
+        unsigned left;
+
+        left = skip & (CHUNK - 1);
+        if (left == 0) {
+            /* exact number of chunks: seek all the way minus one byte to check
+               for end-of-file with a read */
+            lseek(in->fd, skip - 1, SEEK_CUR);
+            if (read(in->fd, in->buf, 1) != 1)
+                bail("unexpected end of file on ", in->name);
+            return;
+        }
+
+        /* skip the integral chunks, update skip with remainder */
+        lseek(in->fd, skip - left, SEEK_CUR);
+        skip = left;
+    }
+
+    /* read more input and skip remainder */
+    bload(in);
+    if (skip > in->left)
+        bail("unexpected end of file on ", in->name);
+    in->left -= skip;
+    in->next += skip;
+}
+
+/* -- end of buffered input functions -- */
+
+/* skip the gzip header from file in */
+local void gzhead(bin *in)
+{
+    int flags;
+
+    /* verify gzip magic header and compression method */
+    if (bget(in) != 0x1f || bget(in) != 0x8b || bget(in) != 8)
+        bail(in->name, " is not a valid gzip file");
+
+    /* get and verify flags */
+    flags = bget(in);
+    if ((flags & 0xe0) != 0)
+        bail("unknown reserved bits set in ", in->name);
+
+    /* skip modification time, extra flags, and os */
+    bskip(in, 6);
+
+    /* skip extra field if present */
+    if (flags & 4) {
+        unsigned len;
+
+        len = bget(in);
+        len += (unsigned)(bget(in)) << 8;
+        bskip(in, len);
+    }
+
+    /* skip file name if present */
+    if (flags & 8)
+        while (bget(in) != 0)
+            ;
+
+    /* skip comment if present */
+    if (flags & 16)
+        while (bget(in) != 0)
+            ;
+
+    /* skip header crc if present */
+    if (flags & 2)
+        bskip(in, 2);
+}
+
+/* write a four-byte little-endian unsigned integer to out */
+local void put4(unsigned long val, FILE *out)
+{
+    putc(val & 0xff, out);
+    putc((val >> 8) & 0xff, out);
+    putc((val >> 16) & 0xff, out);
+    putc((val >> 24) & 0xff, out);
+}
+
+/* Load up zlib stream from buffered input, bail if end of file */
+local void zpull(z_streamp strm, bin *in)
+{
+    if (in->left == 0)
+        bload(in);
+    if (in->left == 0)
+        bail("unexpected end of file on ", in->name);
+    strm->avail_in = in->left;
+    strm->next_in = in->next;
+}
+
+/* Write header for gzip file to out and initialize trailer. */
+local void gzinit(unsigned long *crc, unsigned long *tot, FILE *out)
+{
+    fwrite("\x1f\x8b\x08\0\0\0\0\0\0\xff", 1, 10, out);
+    *crc = crc32(0L, Z_NULL, 0);
+    *tot = 0;
+}
+
+/* Copy the compressed data from name, zeroing the last block bit of the last
+   block if clr is true, and adding empty blocks as needed to get to a byte
+   boundary.  If clr is false, then the last block becomes the last block of
+   the output, and the gzip trailer is written.  crc and tot maintains the
+   crc and length (modulo 2^32) of the output for the trailer.  The resulting
+   gzip file is written to out.  gzinit() must be called before the first call
+   of gzcopy() to write the gzip header and to initialize crc and tot. */
+local void gzcopy(char *name, int clr, unsigned long *crc, unsigned long *tot,
+                  FILE *out)
+{
+    int ret;                /* return value from zlib functions */
+    int pos;                /* where the "last block" bit is in byte */
+    int last;               /* true if processing the last block */
+    bin *in;                /* buffered input file */
+    unsigned char *start;   /* start of compressed data in buffer */
+    unsigned char *junk;    /* buffer for uncompressed data -- discarded */
+    z_off_t len;            /* length of uncompressed data (support > 4 GB) */
+    z_stream strm;          /* zlib inflate stream */
+
+    /* open gzip file and skip header */
+    in = bopen(name);
+    if (in == NULL)
+        bail("could not open ", name);
+    gzhead(in);
+
+    /* allocate buffer for uncompressed data and initialize raw inflate
+       stream */
+    junk = malloc(CHUNK);
+    strm.zalloc = Z_NULL;
+    strm.zfree = Z_NULL;
+    strm.opaque = Z_NULL;
+    strm.avail_in = 0;
+    strm.next_in = Z_NULL;
+    ret = inflateInit2(&strm, -15);
+    if (junk == NULL || ret != Z_OK)
+        bail("out of memory", "");
+
+    /* inflate and copy compressed data, clear last-block bit if requested */
+    len = 0;
+    zpull(&strm, in);
+    start = strm.next_in;
+    last = start[0] & 1;
+    if (last && clr)
+        start[0] &= ~1;
+    strm.avail_out = 0;
+    for (;;) {
+        /* if input used and output done, write used input and get more */
+        if (strm.avail_in == 0 && strm.avail_out != 0) {
+            fwrite(start, 1, strm.next_in - start, out);
+            start = in->buf;
+            in->left = 0;
+            zpull(&strm, in);
+        }
+
+        /* decompress -- return early when end-of-block reached */
+        strm.avail_out = CHUNK;
+        strm.next_out = junk;
+        ret = inflate(&strm, Z_BLOCK);
+        switch (ret) {
+        case Z_MEM_ERROR:
+            bail("out of memory", "");
+        case Z_DATA_ERROR:
+            bail("invalid compressed data in ", in->name);
+        }
+
+        /* update length of uncompressed data */
+        len += CHUNK - strm.avail_out;
+
+        /* check for block boundary (only get this when block copied out) */
+        if (strm.data_type & 128) {
+            /* if that was the last block, then done */
+            if (last)
+                break;
+
+            /* number of unused bits in last byte */
+            pos = strm.data_type & 7;
+
+            /* find the next last-block bit */
+            if (pos != 0) {
+                /* next last-block bit is in last used byte */
+                pos = 0x100 >> pos;
+                last = strm.next_in[-1] & pos;
+                if (last && clr)
+                    strm.next_in[-1] &= ~pos;
+            }
+            else {
+                /* next last-block bit is in next unused byte */
+                if (strm.avail_in == 0) {
+                    /* don't have that byte yet -- get it */
+                    fwrite(start, 1, strm.next_in - start, out);
+                    start = in->buf;
+                    in->left = 0;
+                    zpull(&strm, in);
+                }
+                last = strm.next_in[0] & 1;
+                if (last && clr)
+                    strm.next_in[0] &= ~1;
+            }
+        }
+    }
+
+    /* update buffer with unused input */
+    in->left = strm.avail_in;
+    in->next = strm.next_in;
+
+    /* copy used input, write empty blocks to get to byte boundary */
+    pos = strm.data_type & 7;
+    fwrite(start, 1, in->next - start - 1, out);
+    last = in->next[-1];
+    if (pos == 0 || !clr)
+        /* already at byte boundary, or last file: write last byte */
+        putc(last, out);
+    else {
+        /* append empty blocks to last byte */
+        last &= ((0x100 >> pos) - 1);       /* assure unused bits are zero */
+        if (pos & 1) {
+            /* odd -- append an empty stored block */
+            putc(last, out);
+            if (pos == 1)
+                putc(0, out);               /* two more bits in block header */
+            fwrite("\0\0\xff\xff", 1, 4, out);
+        }
+        else {
+            /* even -- append 1, 2, or 3 empty fixed blocks */
+            switch (pos) {
+            case 6:
+                putc(last | 8, out);
+                last = 0;
+            case 4:
+                putc(last | 0x20, out);
+                last = 0;
+            case 2:
+                putc(last | 0x80, out);
+                putc(0, out);
+            }
+        }
+    }
+
+    /* update crc and tot */
+    *crc = crc32_combine(*crc, bget4(in), len);
+    *tot += (unsigned long)len;
+
+    /* clean up */
+    inflateEnd(&strm);
+    free(junk);
+    bclose(in);
+
+    /* write trailer if this is the last gzip file */
+    if (!clr) {
+        put4(*crc, out);
+        put4(*tot, out);
+    }
+}
+
+/* join the gzip files on the command line, write result to stdout */
+int main(int argc, char **argv)
+{
+    unsigned long crc, tot;     /* running crc and total uncompressed length */
+
+    /* skip command name */
+    argc--;
+    argv++;
+
+    /* show usage if no arguments */
+    if (argc == 0) {
+        fputs("gzjoin usage: gzjoin f1.gz [f2.gz [f3.gz ...]] > fjoin.gz\n",
+              stderr);
+        return 0;
+    }
+
+    /* join gzip files on command line and write to stdout */
+    gzinit(&crc, &tot, stdout);
+    while (argc--)
+        gzcopy(*argv++, argc, &crc, &tot, stdout);
+
+    /* done */
+    return 0;
+}

examples/gzlog.c

@@ -0,0 +1,413 @@
+/*
+ * gzlog.c
+ * Copyright (C) 2004 Mark Adler
+ * For conditions of distribution and use, see copyright notice in gzlog.h
+ * version 1.0, 26 Nov 2004
+ *
+ */
+
+#include <string.h>             /* memcmp() */
+#include <stdlib.h>             /* malloc(), free(), NULL */
+#include <sys/types.h>          /* size_t, off_t */
+#include <unistd.h>             /* read(), close(), sleep(), ftruncate(), */
+                                /* lseek() */
+#include <fcntl.h>              /* open() */
+#include <sys/file.h>           /* flock() */
+#include "zlib.h"               /* deflateInit2(), deflate(), deflateEnd() */
+
+#include "gzlog.h"              /* interface */
+#define local static
+
+/* log object structure */
+typedef struct {
+    int id;                 /* object identifier */
+    int fd;                 /* log file descriptor */
+    off_t extra;            /* offset of extra "ap" subfield */
+    off_t mark_off;         /* offset of marked data */
+    off_t last_off;         /* offset of last block */
+    unsigned long crc;      /* uncompressed crc */
+    unsigned long len;      /* uncompressed length (modulo 2^32) */
+    unsigned stored;        /* length of current stored block */
+} gz_log;
+
+#define GZLOGID 19334       /* gz_log object identifier */
+
+#define LOCK_RETRY 1            /* retry lock once a second */
+#define LOCK_PATIENCE 1200      /* try about twenty minutes before forcing */
+
+/* acquire a lock on a file */
+local int lock(int fd)
+{
+    int patience;
+
+    /* try to lock every LOCK_RETRY seconds for LOCK_PATIENCE seconds */
+    patience = LOCK_PATIENCE;
+    do {
+        if (flock(fd, LOCK_EX + LOCK_NB) == 0)
+            return 0;
+        (void)sleep(LOCK_RETRY);
+        patience -= LOCK_RETRY;
+    } while (patience > 0);
+
+    /* we've run out of patience -- give up */
+    return -1;
+}
+
+/* release lock */
+local void unlock(int fd)
+{
+    (void)flock(fd, LOCK_UN);
+}
+
+/* release a log object */
+local void log_clean(gz_log *log)
+{
+    unlock(log->fd);
+    (void)close(log->fd);
+    free(log);
+}
+
+/* read an unsigned long from a byte buffer little-endian */
+local unsigned long make_ulg(unsigned char *buf)
+{
+    int n;
+    unsigned long val;
+
+    val = (unsigned long)(*buf++);
+    for (n = 8; n < 32; n += 8)
+        val += (unsigned long)(*buf++) << n;
+    return val;
+}
+
+/* read an off_t from a byte buffer little-endian */
+local off_t make_off(unsigned char *buf)
+{
+    int n;
+    off_t val;
+
+    val = (off_t)(*buf++);
+    for (n = 8; n < 64; n += 8)
+        val += (off_t)(*buf++) << n;
+    return val;
+}
+
+/* write an unsigned long little-endian to byte buffer */
+local void dice_ulg(unsigned long val, unsigned char *buf)
+{
+    int n;
+
+    for (n = 0; n < 4; n++) {
+        *buf++ = val & 0xff;
+        val >>= 8;
+    }
+}
+
+/* write an off_t little-endian to byte buffer */
+local void dice_off(off_t val, unsigned char *buf)
+{
+    int n;
+
+    for (n = 0; n < 8; n++) {
+        *buf++ = val & 0xff;
+        val >>= 8;
+    }
+}
+
+/* initial, empty gzip file for appending */
+local char empty_gz[] = {
+    0x1f, 0x8b,                 /* magic gzip id */
+    8,                          /* compression method is deflate */
+    4,                          /* there is an extra field */
+    0, 0, 0, 0,                 /* no modification time provided */
+    0, 0xff,                    /* no extra flags, no OS */
+    20, 0, 'a', 'p', 16, 0,     /* extra field with "ap" subfield */
+    32, 0, 0, 0, 0, 0, 0, 0,    /* offset of uncompressed data */
+    32, 0, 0, 0, 0, 0, 0, 0,    /* offset of last block */
+    1, 0, 0, 0xff, 0xff,        /* empty stored block (last) */
+    0, 0, 0, 0,                 /* crc */
+    0, 0, 0, 0                  /* uncompressed length */
+};
+
+/* initialize a log object with locking */
+void *gzlog_open(char *path)
+{
+    unsigned xlen;
+    unsigned char temp[20];
+    unsigned sub_len;
+    int good;
+    gz_log *log;
+
+    /* allocate log structure */
+    log = malloc(sizeof(gz_log));
+    if (log == NULL)
+        return NULL;
+    log->id = GZLOGID;
+
+    /* open file, creating it if necessary, and locking it */
+    log->fd = open(path, O_RDWR | O_CREAT, 0600);
+    if (log->fd < 0) {
+        free(log);
+        return NULL;
+    }
+    if (lock(log->fd)) {
+        close(log->fd);
+        free(log);
+        return NULL;
+    }
+
+    /* if file is empty, write new gzip stream */
+    if (lseek(log->fd, 0, SEEK_END) == 0) {
+        if (write(log->fd, empty_gz, sizeof(empty_gz)) != sizeof(empty_gz)) {
+            log_clean(log);
+            return NULL;
+        }
+    }
+
+    /* check gzip header */
+    (void)lseek(log->fd, 0, SEEK_SET);
+    if (read(log->fd, temp, 12) != 12 || temp[0] != 0x1f ||
+        temp[1] != 0x8b || temp[2] != 8 || (temp[3] & 4) == 0) {
+        log_clean(log);
+        return NULL;
+    }
+
+    /* process extra field to find "ap" sub-field */
+    xlen = temp[10] + (temp[11] << 8);
+    good = 0;
+    while (xlen) {
+        if (xlen < 4 || read(log->fd, temp, 4) != 4)
+            break;
+        sub_len = temp[2];
+        sub_len += temp[3] << 8;
+        xlen -= 4;
+        if (memcmp(temp, "ap", 2) == 0 && sub_len == 16) {
+            good = 1;
+            break;
+        }
+        if (xlen < sub_len)
+            break;
+        (void)lseek(log->fd, sub_len, SEEK_CUR);
+        xlen -= sub_len;
+    }
+    if (!good) {
+        log_clean(log);
+        return NULL;
+    }
+
+    /* read in "ap" sub-field */
+    log->extra = lseek(log->fd, 0, SEEK_CUR);
+    if (read(log->fd, temp, 16) != 16) {
+        log_clean(log);
+        return NULL;
+    }
+    log->mark_off = make_off(temp);
+    log->last_off = make_off(temp + 8);
+
+    /* get crc, length of gzip file */
+    (void)lseek(log->fd, log->last_off, SEEK_SET);
+    if (read(log->fd, temp, 13) != 13 ||
+        memcmp(temp, "\001\000\000\377\377", 5) != 0) {
+        log_clean(log);
+        return NULL;
+    }
+    log->crc = make_ulg(temp + 5);
+    log->len = make_ulg(temp + 9);
+
+    /* set up to write over empty last block */
+    (void)lseek(log->fd, log->last_off + 5, SEEK_SET);
+    log->stored = 0;
+    return (void *)log;
+}
+
+/* maximum amount to put in a stored block before starting a new one */
+#define MAX_BLOCK 16384
+
+/* write a block to a log object */
+int gzlog_write(void *obj, char *data, size_t len)
+{
+    size_t some;
+    unsigned char temp[5];
+    gz_log *log;
+
+    /* check object */
+    log = (gz_log *)obj;
+    if (log == NULL || log->id != GZLOGID)
+        return 1;
+
+    /* write stored blocks until all of the input is written */
+    do {
+        some = MAX_BLOCK - log->stored;
+        if (some > len)
+            some = len;
+        if (write(log->fd, data, some) != some)
+            return 1;
+        log->crc = crc32(log->crc, data, some);
+        log->len += some;
+        len -= some;
+        data += some;
+        log->stored += some;
+
+        /* if the stored block is full, end it and start another */
+        if (log->stored == MAX_BLOCK) {
+            (void)lseek(log->fd, log->last_off, SEEK_SET);
+            temp[0] = 0;
+            dice_ulg(log->stored + ((unsigned long)(~log->stored) << 16),
+                     temp + 1);
+            if (write(log->fd, temp, 5) != 5)
+                return 1;
+            log->last_off = lseek(log->fd, log->stored, SEEK_CUR);
+            (void)lseek(log->fd, 5, SEEK_CUR);
+            log->stored = 0;
+        }
+    } while (len);
+    return 0;
+}
+
+/* recompress the remaining stored deflate data in place */
+local int recomp(gz_log *log)
+{
+    z_stream strm;
+    size_t len, max;
+    unsigned char *in;
+    unsigned char *out;
+    unsigned char temp[16];
+
+    /* allocate space and read it all in (it's around 1 MB) */
+    len = log->last_off - log->mark_off;
+    max = len + (len >> 12) + (len >> 14) + 11;
+    out = malloc(max);
+    if (out == NULL)
+        return 1;
+    in = malloc(len);
+    if (in == NULL) {
+        free(out);
+        return 1;
+    }
+    (void)lseek(log->fd, log->mark_off, SEEK_SET);
+    if (read(log->fd, in, len) != len) {
+        free(in);
+        free(out);
+        return 1;
+    }
+
+    /* recompress in memory, decoding stored data as we go */
+    /* note: this assumes that unsigned is four bytes or more */
+    /*       consider not making that assumption */
+    strm.zalloc = Z_NULL;
+    strm.zfree = Z_NULL;
+    strm.opaque = Z_NULL;
+    if (deflateInit2(&strm, Z_BEST_COMPRESSION, Z_DEFLATED, -15, 8,
+        Z_DEFAULT_STRATEGY) != Z_OK) {
+        free(in);
+        free(out);
+        return 1;
+    }
+    strm.next_in = in;
+    strm.avail_out = max;
+    strm.next_out = out;
+    while (len >= 5) {
+        if (strm.next_in[0] != 0)
+            break;
+        strm.avail_in = strm.next_in[1] + (strm.next_in[2] << 8);
+        strm.next_in += 5;
+        len -= 5;
+        if (strm.avail_in != 0) {
+            if (len < strm.avail_in)
+                break;
+            len -= strm.avail_in;
+            (void)deflate(&strm, Z_NO_FLUSH);
+            if (strm.avail_in != 0 || strm.avail_out == 0)
+                break;
+        }
+    }
+    (void)deflate(&strm, Z_SYNC_FLUSH);
+    (void)deflateEnd(&strm);
+    free(in);
+    if (len != 0 || strm.avail_out == 0) {
+        free(out);
+        return 1;
+    }
+
+    /* overwrite stored data with compressed data */
+    (void)lseek(log->fd, log->mark_off, SEEK_SET);
+    len = max - strm.avail_out;
+    if (write(log->fd, out, len) != len) {
+        free(out);
+        return 1;
+    }
+    free(out);
+
+    /* write last empty block, crc, and length */
+    log->mark_off = log->last_off = lseek(log->fd, 0, SEEK_CUR);
+    temp[0] = 1;
+    dice_ulg(0xffffL << 16, temp + 1);
+    dice_ulg(log->crc, temp + 5);
+    dice_ulg(log->len, temp + 9);
+    if (write(log->fd, temp, 13) != 13)
+        return 1;
+
+    /* truncate file to discard remaining stored data and old trailer */
+    ftruncate(log->fd, lseek(log->fd, 0, SEEK_CUR));
+
+    /* update extra field to point to new last empty block */
+    (void)lseek(log->fd, log->extra, SEEK_SET);
+    dice_off(log->mark_off, temp);
+    dice_off(log->last_off, temp + 8);
+    if (write(log->fd, temp, 16) != 16)
+        return 1;
+    return 0;
+}
+
+/* maximum accumulation of stored blocks before compressing */
+#define MAX_STORED 1048576
+
+/* close log object */
+int gzlog_close(void *obj)
+{
+    unsigned char temp[8];
+    gz_log *log;
+
+    /* check object */
+    log = (gz_log *)obj;
+    if (log == NULL || log->id != GZLOGID)
+        return 1;
+
+    /* go to start of most recent block being written */
+    (void)lseek(log->fd, log->last_off, SEEK_SET);
+
+    /* if some stuff was put there, update block */
+    if (log->stored) {
+        temp[0] = 0;
+        dice_ulg(log->stored + ((unsigned long)(~log->stored) << 16),
+                 temp + 1);
+        if (write(log->fd, temp, 5) != 5)
+            return 1;
+        log->last_off = lseek(log->fd, log->stored, SEEK_CUR);
+    }
+
+    /* write last block (empty) */
+    if (write(log->fd, "\001\000\000\377\377", 5) != 5)
+        return 1;
+
+    /* write updated crc and uncompressed length */
+    dice_ulg(log->crc, temp);
+    dice_ulg(log->len, temp + 4);
+    if (write(log->fd, temp, 8) != 8)
+        return 1;
+
+    /* put offset of that last block in gzip extra block */
+    (void)lseek(log->fd, log->extra + 8, SEEK_SET);
+    dice_off(log->last_off, temp);
+    if (write(log->fd, temp, 8) != 8)
+        return 1;
+
+    /* if more than 1 MB stored, then time to compress it */
+    if (log->last_off - log->mark_off > MAX_STORED) {
+        if (recomp(log))
+            return 1;
+    }
+
+    /* unlock and close file */
+    log_clean(log);
+    return 0;
+}

examples/gzlog.h

@@ -0,0 +1,58 @@
+/* gzlog.h
+  Copyright (C) 2004 Mark Adler, all rights reserved
+  version 1.0, 26 Nov 2004
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the author be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  Mark Adler    madler@alumni.caltech.edu
+ */
+
+/*
+   The gzlog object allows writing short messages to a gzipped log file,
+   opening the log file locked for small bursts, and then closing it.  The log
+   object works by appending stored data to the gzip file until 1 MB has been
+   accumulated.  At that time, the stored data is compressed, and replaces the
+   uncompressed data in the file.  The log file is truncated to its new size at
+   that time.  After closing, the log file is always valid gzip file that can
+   decompressed to recover what was written.
+
+   A gzip header "extra" field contains two file offsets for appending.  The
+   first points to just after the last compressed data.  The second points to
+   the last stored block in the deflate stream, which is empty.  All of the
+   data between those pointers is uncompressed.
+ */
+
+/* Open a gzlog object, creating the log file if it does not exist.  Return
+   NULL on error.  Note that gzlog_open() could take a long time to return if
+   there is difficulty in locking the file. */
+void *gzlog_open(char *path);
+
+/* Write to a gzlog object.  Return non-zero on error.  This function will
+   simply write data to the file uncompressed.  Compression of the data
+   will not occur until gzlog_close() is called.  It is expected that
+   gzlog_write() is used for a short message, and then gzlog_close() is
+   called.  If a large amount of data is to be written, then the application
+   should write no more than 1 MB at a time with gzlog_write() before
+   calling gzlog_close() and then gzlog_open() again. */
+int gzlog_write(void *log, char *data, size_t len);
+
+/* Close a gzlog object.  Return non-zero on error.  The log file is locked
+   until this function is called.  This function will compress stored data
+   at the end of the gzip file if at least 1 MB has been accumulated.  Note
+   that the file will not be a valid gzip file until this function completes.
+ */
+int gzlog_close(void *log);

examples/zlib_how.html

@@ -0,0 +1,523 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
+  "http://www.w3.org/TR/REC-html40/loose.dtd">
+<html>
+<head>
+<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
+<title>zlib Usage Example</title>
+<!--  Copyright (c) 2004 Mark Adler.  -->
+</head>
+<body bgcolor="#FFFFFF" text="#000000" link="#0000FF" vlink="#00A000">
+<h2 align="center"> zlib Usage Example </h2>
+We often get questions about how the <tt>deflate()</tt> and <tt>inflate()</tt> functions should be used.
+Users wonder when they should provide more input, when they should use more output,
+what to do with a <tt>Z_BUF_ERROR</tt>, how to make sure the process terminates properly, and
+so on.  So for those who have read <tt>zlib.h</tt> (a few times), and
+would like further edification, below is an annotated example in C of simple routines to compress and decompress
+from an input file to an output file using <tt>deflate()</tt> and <tt>inflate()</tt> respectively.  The
+annotations are interspersed between lines of the code.  So please read between the lines.
+We hope this helps explain some of the intricacies of <em>zlib</em>.
+<p>
+Without further adieu, here is the program <a href="zpipe.c"><tt>zpipe.c</tt></a>:
+<pre><b>
+/* zpipe.c: example of proper use of zlib's inflate() and deflate()
+   Not copyrighted -- provided to the public domain
+   Version 1.2  9 November 2004  Mark Adler */
+
+/* Version history:
+   1.0  30 Oct 2004  First version
+   1.1   8 Nov 2004  Add void casting for unused return values
+                     Use switch statement for inflate() return values
+   1.2   9 Nov 2004  Add assertions to document zlib guarantees
+ */
+</b></pre><!-- -->
+We now include the header files for the required definitions.  From
+<tt>stdio.h</tt> we use <tt>fopen()</tt>, <tt>fread()</tt>, <tt>fwrite()</tt>,
+<tt>feof()</tt>, <tt>ferror()</tt>, and <tt>fclose()</tt> for file i/o, and
+<tt>fputs()</tt> for error messages.  From <tt>string.h</tt> we use
+<tt>strcmp()</tt> for command line argument processing.
+From <tt>assert.h</tt> we use the <tt>assert()</tt> macro.
+From <tt>zlib.h</tt>
+we use the basic compression functions <tt>deflateInit()</tt>,
+<tt>deflate()</tt>, and <tt>deflateEnd()</tt>, and the basic decompression
+functions <tt>inflateInit()</tt>, <tt>inflate()</tt>, and
+<tt>inflateEnd()</tt>.
+<pre><b>
+#include &lt;stdio.h&gt;
+#include &lt;string.h&gt;
+#include &lt;assert.h&gt;
+#include "zlib.h"
+</b></pre><!-- -->
+<tt>CHUNK</tt> is simply the buffer size for feeding data to and pulling data
+from the <em>zlib</em> routines.  Larger buffer sizes would be more efficient,
+especially for <tt>inflate()</tt>.  If the memory is available, buffers sizes
+on the order of 128K or 256K bytes should be used.
+<pre><b>
+#define CHUNK 16384
+</b></pre><!-- -->
+The <tt>def()</tt> routine compresses data from an input file to an output file.  The output data
+will be in the <em>zlib</em> format, which is different from the <em>gzip</em> or <em>zip</em>
+formats.  The <em>zlib</em> format has a very small header of only two bytes to identify it as
+a <em>zlib</em> stream and to provide decoding information, and a four-byte trailer with a fast
+check value to verify the integrity of the uncompressed data after decoding.
+<pre><b>
+/* Compress from file source to file dest until EOF on source.
+   def() returns Z_OK on success, Z_MEM_ERROR if memory could not be
+   allocated for processing, Z_STREAM_ERROR if an invalid compression
+   level is supplied, Z_VERSION_ERROR if the version of zlib.h and the
+   version of the library linked do not match, or Z_ERRNO if there is
+   an error reading or writing the files. */
+int def(FILE *source, FILE *dest, int level)
+{
+</b></pre>
+Here are the local variables for <tt>def()</tt>.  <tt>ret</tt> will be used for <em>zlib</em>
+return codes.  <tt>flush</tt> will keep track of the current flushing state for <tt>deflate()</tt>,
+which is either no flushing, or flush to completion after the end of the input file is reached.
+<tt>have</tt> is the amount of data returned from <tt>deflate()</tt>.  The <tt>strm</tt> structure
+is used to pass information to and from the <em>zlib</em> routines, and to maintain the
+<tt>deflate()</tt> state.  <tt>in</tt> and <tt>out</tt> are the input and output buffers for
+<tt>deflate()</tt>.
+<pre><b>
+    int ret, flush;
+    unsigned have;
+    z_stream strm;
+    char in[CHUNK];
+    char out[CHUNK];
+</b></pre><!-- -->
+The first thing we do is to initialize the <em>zlib</em> state for compression using
+<tt>deflateInit()</tt>.  This must be done before the first use of <tt>deflate()</tt>.
+The <tt>zalloc</tt>, <tt>zfree</tt>, and <tt>opaque</tt> fields in the <tt>strm</tt>
+structure must be initialized before calling <tt>deflateInit()</tt>.  Here they are
+set to the <em>zlib</em> constant <tt>Z_NULL</tt> to request that <em>zlib</em> use
+the default memory allocation routines.  An application may also choose to provide
+custom memory allocation routines here.  <tt>deflateInit()</tt> will allocate on the
+order of 256K bytes for the internal state.
+(See <a href="zlib_tech.html"><em>zlib Technical Details</em></a>.)
+<p>
+<tt>deflateInit()</tt> is called with a pointer to the structure to be initialized and
+the compression level, which is an integer in the range of -1 to 9.  Lower compression
+levels result in faster execution, but less compression.  Higher levels result in
+greater compression, but slower execution.  The <em>zlib</em> constant Z_DEFAULT_COMPRESSION,
+equal to -1,
+provides a good compromise between compression and speed and is equivalent to level 6.
+Level 0 actually does no compression at all, and in fact expands the data slightly to produce
+the <em>zlib</em> format (it is not a byte-for-byte copy of the input).
+More advanced applications of <em>zlib</em>
+may use <tt>deflateInit2()</tt> here instead.  Such an application may want to reduce how
+much memory will be used, at some price in compression.  Or it may need to request a
+<em>gzip</em> header and trailer instead of a <em>zlib</em> header and trailer, or raw
+encoding with no header or trailer at all.
+<p>
+We must check the return value of <tt>deflateInit()</tt> against the <em>zlib</em> constant
+<tt>Z_OK</tt> to make sure that it was able to
+allocate memory for the internal state, and that the provided arguments were valid.
+<tt>deflateInit()</tt> will also check that the version of <em>zlib</em> that the <tt>zlib.h</tt>
+file came from matches the version of <em>zlib</em> actually linked with the program.  This
+is especially important for environments in which <em>zlib</em> is a shared library.
+<p>
+Note that an application can initialize multiple, independent <em>zlib</em> streams, which can
+operate in parallel.  The state information maintained in the structure allows the <em>zlib</em>
+routines to be reentrant.
+<pre><b>
+    /* allocate deflate state */
+    strm.zalloc = Z_NULL;
+    strm.zfree = Z_NULL;
+    strm.opaque = Z_NULL;
+    ret = deflateInit(&amp;strm, level);
+    if (ret != Z_OK)
+        return ret;
+</b></pre><!-- -->
+With the pleasantries out of the way, now we can get down to business.  The outer <tt>do</tt>-loop
+reads all of the input file and exits at the bottom of the loop once end-of-file is reached.
+This loop contains the only call of <tt>deflate()</tt>.  So we must make sure that all of the
+input data has been processed and that all of the output data has been generated and consumed
+before we fall out of the loop at the bottom.
+<pre><b>
+    /* compress until end of file */
+    do {
+</b></pre>
+We start off by reading data from the input file.  The number of bytes read is put directly
+into <tt>avail_in</tt>, and a pointer to those bytes is put into <tt>next_in</tt>.  We also
+check to see if end-of-file on the input has been reached.  If we are at the end of file, then <tt>flush</tt> is set to the
+<em>zlib</em> constant <tt>Z_FINISH</tt>, which is later passed to <tt>deflate()</tt> to
+indicate that this is the last chunk of input data to compress.  We need to use <tt>feof()</tt>
+to check for end-of-file as opposed to seeing if fewer than <tt>CHUNK</tt> bytes have been read.  The
+reason is that if the input file length is an exact multiple of <tt>CHUNK</tt>, we will miss
+the fact that we got to the end-of-file, and not know to tell <tt>deflate()</tt> to finish
+up the compressed stream.  If we are not yet at the end of the input, then the <em>zlib</em>
+constant <tt>Z_NO_FLUSH</tt> will be passed to <tt>deflate</tt> to indicate that we are still
+in the middle of the uncompressed data.
+<p>
+If there is an error in reading from the input file, the process is aborted with
+<tt>deflateEnd()</tt> being called to free the allocated <em>zlib</em> state before returning
+the error.  We wouldn't want a memory leak, now would we?  <tt>deflateEnd()</tt> can be called
+at any time after the state has been initialized.  Once that's done, <tt>deflateInit()</tt> (or
+<tt>deflateInit2()</tt>) would have to be called to start a new compression process.  There is
+no point here in checking the <tt>deflateEnd()</tt> return code.  The deallocation can't fail.
+<pre><b>
+        strm.avail_in = fread(in, 1, CHUNK, source);
+        if (ferror(source)) {
+            (void)deflateEnd(&amp;strm);
+            return Z_ERRNO;
+        }
+        flush = feof(source) ? Z_FINISH : Z_NO_FLUSH;
+        strm.next_in = in;
+</b></pre><!-- -->
+The inner <tt>do</tt>-loop passes our chunk of input data to <tt>deflate()</tt>, and then
+keeps calling <tt>deflate()</tt> until it is done producing output.  Once there is no more
+new output, <tt>deflate()</tt> is guaranteed to have consumed all of the input, i.e.,
+<tt>avail_in</tt> will be zero.
+<pre><b>
+        /* run deflate() on input until output buffer not full, finish
+           compression if all of source has been read in */
+        do {
+</b></pre>
+Output space is provided to <tt>deflate()</tt> by setting <tt>avail_out</tt> to the number
+of available output bytes and <tt>next_out</tt> to a pointer to that space.
+<pre><b>
+            strm.avail_out = CHUNK;
+            strm.next_out = out;
+</b></pre>
+Now we call the compression engine itself, <tt>deflate()</tt>.  It takes as many of the
+<tt>avail_in</tt> bytes at <tt>next_in</tt> as it can process, and writes as many as
+<tt>avail_out</tt> bytes to <tt>next_out</tt>.  Those counters and pointers are then
+updated past the input data consumed and the output data written.  It is the amount of
+output space available that may limit how much input is consumed.
+Hence the inner loop to make sure that
+all of the input is consumed by providing more output space each time.  Since <tt>avail_in</tt>
+and <tt>next_in</tt> are updated by <tt>deflate()</tt>, we don't have to mess with those
+between <tt>deflate()</tt> calls until it's all used up.
+<p>
+The parameters to <tt>deflate()</tt> are a pointer to the <tt>strm</tt> structure containing
+the input and output information and the internal compression engine state, and a parameter
+indicating whether and how to flush data to the output.  Normally <tt>deflate</tt> will consume
+several K bytes of input data before producing any output (except for the header), in order
+to accumulate statistics on the data for optimum compression.  It will then put out a burst of
+compressed data, and proceed to consume more input before the next burst.  Eventually,
+<tt>deflate()</tt>
+must be told to terminate the stream, complete the compression with provided input data, and
+write out the trailer check value.  <tt>deflate()</tt> will continue to compress normally as long
+as the flush parameter is <tt>Z_NO_FLUSH</tt>.  Once the <tt>Z_FINISH</tt> parameter is provided,
+<tt>deflate()</tt> will begin to complete the compressed output stream.  However depending on how
+much output space is provided, <tt>deflate()</tt> may have to be called several times until it
+has provided the complete compressed stream, even after it has consumed all of the input.  The flush
+parameter must continue to be <tt>Z_FINISH</tt> for those subsequent calls.
+<p>
+There are other values of the flush parameter that are used in more advanced applications.  You can
+force <tt>deflate()</tt> to produce a burst of output that encodes all of the input data provided
+so far, even if it wouldn't have otherwise, for example to control data latency on a link with
+compressed data.  You can also ask that <tt>deflate()</tt> do that as well as erase any history up to
+that point so that what follows can be decompressed independently, for example for random access
+applications.  Both requests will degrade compression by an amount depending on how often such
+requests are made.
+<p>
+<tt>deflate()</tt> has a return value that can indicate errors, yet we do not check it here.  Why
+not?  Well, it turns out that <tt>deflate()</tt> can do no wrong here.  Let's go through
+<tt>deflate()</tt>'s return values and dispense with them one by one.  The possible values are
+<tt>Z_OK</tt>, <tt>Z_STREAM_END</tt>, <tt>Z_STREAM_ERROR</tt>, or <tt>Z_BUF_ERROR</tt>.  <tt>Z_OK</tt>
+is, well, ok.  <tt>Z_STREAM_END</tt> is also ok and will be returned for the last call of
+<tt>deflate()</tt>.  This is already guaranteed by calling <tt>deflate()</tt> with <tt>Z_FINISH</tt>
+until it has no more output.  <tt>Z_STREAM_ERROR</tt> is only possible if the stream is not
+initialized properly, but we did initialize it properly.  There is no harm in checking for
+<tt>Z_STREAM_ERROR</tt> here, for example to check for the possibility that some
+other part of the application inadvertently clobbered the memory containing the <em>zlib</em> state.
+<tt>Z_BUF_ERROR</tt> will be explained further below, but
+suffice it to say that this is simply an indication that <tt>deflate()</tt> could not consume
+more input or produce more output.  <tt>deflate()</tt> can be called again with more output space
+or more available input, which it will be in this code.
+<pre><b>
+            ret = deflate(&amp;strm, flush);    /* no bad return value */
+            assert(ret != Z_STREAM_ERROR);  /* state not clobbered */
+</b></pre>
+Now we compute how much output <tt>deflate()</tt> provided on the last call, which is the
+difference between how much space was provided before the call, and how much output space
+is still available after the call.  Then that data, if any, is written to the output file.
+We can then reuse the output buffer for the next call of <tt>deflate()</tt>.  Again if there
+is a file i/o error, we call <tt>deflateEnd()</tt> before returning to avoid a memory leak.
+<pre><b>
+            have = CHUNK - strm.avail_out;
+            if (fwrite(out, 1, have, dest) != have || ferror(dest)) {
+                (void)deflateEnd(&amp;strm);
+                return Z_ERRNO;
+            }
+</b></pre>
+The inner <tt>do</tt>-loop is repeated until the last <tt>deflate()</tt> call fails to fill the
+provided output buffer.  Then we know that <tt>deflate()</tt> has done as much as it can with
+the provided input, and that all of that input has been consumed.  We can then fall out of this
+loop and reuse the input buffer.
+<p>
+The way we tell that <tt>deflate()</tt> has no more output is by seeing that it did not fill
+the output buffer, leaving <tt>avail_out</tt> greater than zero.  However suppose that
+<tt>deflate()</tt> has no more output, but just so happened to exactly fill the output buffer!
+<tt>avail_out</tt> is zero, and we can't tell that <tt>deflate()</tt> has done all it can.
+As far as we know, <tt>deflate()</tt>
+has more output for us.  So we call it again.  But now <tt>deflate()</tt> produces no output
+at all, and <tt>avail_out</tt> remains unchanged as <tt>CHUNK</tt>.  That <tt>deflate()</tt> call
+wasn't able to do anything, either consume input or produce output, and so it returns
+<tt>Z_BUF_ERROR</tt>.  (See, I told you I'd cover this later.)  However this is not a problem at
+all.  Now we finally have the desired indication that <tt>deflate()</tt> is really done,
+and so we drop out of the inner loop to provide more input to <tt>deflate()</tt>.
+<p>
+With <tt>flush</tt> set to <tt>Z_FINISH</tt>, this final set of <tt>deflate()</tt> calls will
+complete the output stream.  Once that is done, subsequent calls of <tt>deflate()</tt> would return
+<tt>Z_STREAM_ERROR</tt> if the flush parameter is not <tt>Z_FINISH</tt>, and do no more processing
+until the state is reinitialized.
+<p>
+Some applications of <em>zlib</em> have two loops that call <tt>deflate()</tt>
+instead of the single inner loop we have here.  The first loop would call
+without flushing and feed all of the data to <tt>deflate()</tt>.  The second loop would call
+<tt>deflate()</tt> with no more
+data and the <tt>Z_FINISH</tt> parameter to complete the process.  As you can see from this
+example, that can be avoided by simply keeping track of the current flush state.
+<pre><b>
+        } while (strm.avail_out == 0);
+        assert(strm.avail_in == 0);     /* all input will be used */
+</b></pre><!-- -->
+Now we check to see if we have already processed all of the input file.  That information was
+saved in the <tt>flush</tt> variable, so we see if that was set to <tt>Z_FINISH</tt>.  If so,
+then we're done and we fall out of the outer loop.  We're guaranteed to get <tt>Z_STREAM_END</tt>
+from the last <tt>deflate()</tt> call, since we ran it until the last chunk of input was
+consumed and all of the output was generated.
+<pre><b>
+        /* done when last data in file processed */
+    } while (flush != Z_FINISH);
+    assert(ret == Z_STREAM_END);        /* stream will be complete */
+</b></pre><!-- -->
+The process is complete, but we still need to deallocate the state to avoid a memory leak
+(or rather more like a memory hemorrhage if you didn't do this).  Then
+finally we can return with a happy return value.
+<pre><b>
+    /* clean up and return */
+    (void)deflateEnd(&amp;strm);
+    return Z_OK;
+}
+</b></pre><!-- -->
+Now we do the same thing for decompression in the <tt>inf()</tt> routine. <tt>inf()</tt>
+decompresses what is hopefully a valid <em>zlib</em> stream from the input file and writes the
+uncompressed data to the output file.  Much of the discussion above for <tt>def()</tt>
+applies to <tt>inf()</tt> as well, so the discussion here will focus on the differences between
+the two.
+<pre><b>
+/* Decompress from file source to file dest until stream ends or EOF.
+   inf() returns Z_OK on success, Z_MEM_ERROR if memory could not be
+   allocated for processing, Z_DATA_ERROR if the deflate data is
+   invalid or incomplete, Z_VERSION_ERROR if the version of zlib.h and
+   the version of the library linked do not match, or Z_ERRNO if there
+   is an error reading or writing the files. */
+int inf(FILE *source, FILE *dest)
+{
+</b></pre>
+The local variables have the same functionality as they do for <tt>def()</tt>.  The
+only difference is that there is no <tt>flush</tt> variable, since <tt>inflate()</tt>
+can tell from the <em>zlib</em> stream itself when the stream is complete.
+<pre><b>
+    int ret;
+    unsigned have;
+    z_stream strm;
+    char in[CHUNK];
+    char out[CHUNK];
+</b></pre><!-- -->
+The initialization of the state is the same, except that there is no compression level,
+of course, and two more elements of the structure are initialized.  <tt>avail_in</tt>
+and <tt>next_in</tt> must be initialized before calling <tt>inflateInit()</tt>.  This
+is because the application has the option to provide the start of the zlib stream in
+order for <tt>inflateInit()</tt> to have access to information about the compression
+method to aid in memory allocation.  In the current implementation of <em>zlib</em>
+(up through versions 1.2.x), the method-dependent memory allocations are deferred to the first call of
+<tt>inflate()</tt> anyway.  However those fields must be initialized since later versions
+of <em>zlib</em> that provide more compression methods may take advantage of this interface.
+In any case, no decompression is performed by <tt>inflateInit()</tt>, so the
+<tt>avail_out</tt> and <tt>next_out</tt> fields do not need to be initialized before calling.
+<p>
+Here <tt>avail_in</tt> is set to zero and <tt>next_in</tt> is set to <tt>Z_NULL</tt> to
+indicate that no input data is being provided.
+<pre><b>
+    /* allocate inflate state */
+    strm.zalloc = Z_NULL;
+    strm.zfree = Z_NULL;
+    strm.opaque = Z_NULL;
+    strm.avail_in = 0;
+    strm.next_in = Z_NULL;
+    ret = inflateInit(&amp;strm);
+    if (ret != Z_OK)
+        return ret;
+</b></pre><!-- -->
+The outer <tt>do</tt>-loop decompresses input until <tt>inflate()</tt> indicates
+that it has reached the end of the compressed data and has produced all of the uncompressed
+output.  This is in contrast to <tt>def()</tt> which processes all of the input file.
+If end-of-file is reached before the compressed data self-terminates, then the compressed
+data is incomplete and an error is returned.
+<pre><b>
+    /* decompress until deflate stream ends or end of file */
+    do {
+</b></pre>
+We read input data and set the <tt>strm</tt> structure accordingly.  If we've reached the
+end of the input file, then we leave the outer loop and report an error, since the
+compressed data is incomplete.  Note that we may read more data than is eventually consumed
+by <tt>inflate()</tt>, if the input file continues past the <em>zlib</em> stream.
+For applications where <em>zlib</em> streams are embedded in other data, this routine would
+need to be modified to return the unused data, or at least indicate how much of the input
+data was not used, so the application would know where to pick up after the <em>zlib</em> stream.
+<pre><b>
+        strm.avail_in = fread(in, 1, CHUNK, source);
+        if (ferror(source)) {
+            (void)inflateEnd(&amp;strm);
+            return Z_ERRNO;
+        }
+        if (strm.avail_in == 0)
+            break;
+        strm.next_in = in;
+</b></pre><!-- -->
+The inner <tt>do</tt>-loop has the same function it did in <tt>def()</tt>, which is to
+keep calling <tt>inflate()</tt> until has generated all of the output it can with the
+provided input.
+<pre><b>
+        /* run inflate() on input until output buffer not full */
+        do {
+</b></pre>
+Just like in <tt>def()</tt>, the same output space is provided for each call of <tt>inflate()</tt>.
+<pre><b>
+            strm.avail_out = CHUNK;
+            strm.next_out = out;
+</b></pre>
+Now we run the decompression engine itself.  There is no need to adjust the flush parameter, since
+the <em>zlib</em> format is self-terminating. The main difference here is that there are
+return values that we need to pay attention to.  <tt>Z_DATA_ERROR</tt>
+indicates that <tt>inflate()</tt> detected an error in the <em>zlib</em> compressed data format,
+which means that either the data is not a <em>zlib</em> stream to begin with, or that the data was
+corrupted somewhere along the way since it was compressed.  The other error to be processed is
+<tt>Z_MEM_ERROR</tt>, which can occur since memory allocation is deferred until <tt>inflate()</tt>
+needs it, unlike <tt>deflate()</tt>, whose memory is allocated at the start by <tt>deflateInit()</tt>.
+<p>
+Advanced applications may use
+<tt>deflateSetDictionary()</tt> to prime <tt>deflate()</tt> with a set of likely data to improve the
+first 32K or so of compression.  This is noted in the <em>zlib</em> header, so <tt>inflate()</tt>
+requests that that dictionary be provided before it can start to decompress.  Without the dictionary,
+correct decompression is not possible.  For this routine, we have no idea what the dictionary is,
+so the <tt>Z_NEED_DICT</tt> indication is converted to a <tt>Z_DATA_ERROR</tt>.
+<p>
+<tt>inflate()</tt> can also return <tt>Z_STREAM_ERROR</tt>, which should not be possible here,
+but could be checked for as noted above for <tt>def()</tt>.  <tt>Z_BUF_ERROR</tt> does not need to be
+checked for here, for the same reasons noted for <tt>def()</tt>.  <tt>Z_STREAM_END</tt> will be
+checked for later.
+<pre><b>
+            ret = inflate(&amp;strm, Z_NO_FLUSH);
+            assert(ret != Z_STREAM_ERROR);  /* state not clobbered */
+            switch (ret) {
+            case Z_NEED_DICT:
+                ret = Z_DATA_ERROR;     /* and fall through */
+            case Z_DATA_ERROR:
+            case Z_MEM_ERROR:
+                (void)inflateEnd(&amp;strm);
+                return ret;
+            }
+</b></pre>
+The output of <tt>inflate()</tt> is handled identically to that of <tt>deflate()</tt>.
+<pre><b>
+            have = CHUNK - strm.avail_out;
+            if (fwrite(out, 1, have, dest) != have || ferror(dest)) {
+                (void)inflateEnd(&amp;strm);
+                return Z_ERRNO;
+            }
+</b></pre>
+The inner <tt>do</tt>-loop ends when <tt>inflate()</tt> has no more output as indicated
+by not filling the output buffer, just as for <tt>deflate()</tt>.  In this case, we cannot
+assert that <tt>strm.avail_in</tt> will be zero, since the deflate stream may end before the file
+does.
+<pre><b>
+        } while (strm.avail_out == 0);
+</b></pre><!-- -->
+The outer <tt>do</tt>-loop ends when <tt>inflate()</tt> reports that it has reached the
+end of the input <em>zlib</em> stream, has completed the decompression and integrity
+check, and has provided all of the output.  This is indicated by the <tt>inflate()</tt>
+return value <tt>Z_STREAM_END</tt>.  The inner loop is guaranteed to leave <tt>ret</tt>
+equal to <tt>Z_STREAM_END</tt> if the last chunk of the input file read contained the end
+of the <em>zlib</em> stream.  So if the return value is not <tt>Z_STREAM_END</tt>, the
+loop continues to read more input.
+<pre><b>
+        /* done when inflate() says it's done */
+    } while (ret != Z_STREAM_END);
+</b></pre><!-- -->
+At this point, decompression successfully completed, or we broke out of the loop due to no
+more data being available from the input file.  If the last <tt>inflate()</tt> return value
+is not <tt>Z_STREAM_END</tt>, then the <em>zlib</em> stream was incomplete and a data error
+is returned.  Otherwise, we return with a happy return value.  Of course, <tt>inflateEnd()</tt>
+is called first to avoid a memory leak.
+<pre><b>
+    /* clean up and return */
+    (void)inflateEnd(&amp;strm);
+    return ret == Z_STREAM_END ? Z_OK : Z_DATA_ERROR;
+}
+</b></pre><!-- -->
+That ends the routines that directly use <em>zlib</em>.  The following routines make this
+a command-line program by running data through the above routines from <tt>stdin</tt> to
+<tt>stdout</tt>, and handling any errors reported by <tt>def()</tt> or <tt>inf()</tt>.
+<p>
+<tt>zerr()</tt> is used to interpret the possible error codes from <tt>def()</tt>
+and <tt>inf()</tt>, as detailed in their comments above, and print out an error message.
+Note that these are only a subset of the possible return values from <tt>deflate()</tt>
+and <tt>inflate()</tt>.
+<pre><b>
+/* report a zlib or i/o error */
+void zerr(int ret)
+{
+    fputs("zpipe: ", stderr);
+    switch (ret) {
+    case Z_ERRNO:
+        if (ferror(stdin))
+            fputs("error reading stdin\n", stderr);
+        if (ferror(stdout))
+            fputs("error writing stdout\n", stderr);
+        break;
+    case Z_STREAM_ERROR:
+        fputs("invalid compression level\n", stderr);
+        break;
+    case Z_DATA_ERROR:
+        fputs("invalid or incomplete deflate data\n", stderr);
+        break;
+    case Z_MEM_ERROR:
+        fputs("out of memory\n", stderr);
+        break;
+    case Z_VERSION_ERROR:
+        fputs("zlib version mismatch!\n", stderr);
+    }
+}
+</b></pre><!-- -->
+Here is the <tt>main()</tt> routine used to test <tt>def()</tt> and <tt>inf()</tt>.  The
+<tt>zpipe</tt> command is simply a compression pipe from <tt>stdin</tt> to <tt>stdout</tt>, if
+no arguments are given, or it is a decompression pipe if <tt>zpipe -d</tt> is used.  If any other
+arguments are provided, no compression or decompression is performed.  Instead a usage
+message is displayed.  Examples are <tt>zpipe < foo.txt > foo.txt.z</tt> to compress, and
+<tt>zpipe -d < foo.txt.z > foo.txt</tt> to decompress.
+<pre><b>
+/* compress or decompress from stdin to stdout */
+int main(int argc, char **argv)
+{
+    int ret;
+
+    /* do compression if no arguments */
+    if (argc == 1) {
+        ret = def(stdin, stdout, Z_DEFAULT_COMPRESSION);
+        if (ret != Z_OK)
+            zerr(ret);
+        return ret;
+    }
+
+    /* do decompression if -d specified */
+    else if (argc == 2 &amp;&amp; strcmp(argv[1], "-d") == 0) {
+        ret = inf(stdin, stdout);
+        if (ret != Z_OK)
+            zerr(ret);
+        return ret;
+    }
+
+    /* otherwise, report usage */
+    else {
+        fputs("zpipe usage: zpipe [-d] &lt; source &gt; dest\n", stderr);
+        return 1;
+    }
+}
+</b></pre>
+<hr>
+<i>Copyright (c) 2004 by Mark Adler<br>Last modified 13 November 2004</i>
+</body>
+</html>

examples/zpipe.c

@@ -0,0 +1,191 @@
+/* zpipe.c: example of proper use of zlib's inflate() and deflate()
+   Not copyrighted -- provided to the public domain
+   Version 1.2  9 November 2004  Mark Adler */
+
+/* Version history:
+   1.0  30 Oct 2004  First version
+   1.1   8 Nov 2004  Add void casting for unused return values
+                     Use switch statement for inflate() return values
+   1.2   9 Nov 2004  Add assertions to document zlib guarantees
+   1.3   6 Apr 2005  Remove incorrect assertion in inf()
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <assert.h>
+#include "zlib.h"
+
+#define CHUNK 16384
+
+/* Compress from file source to file dest until EOF on source.
+   def() returns Z_OK on success, Z_MEM_ERROR if memory could not be
+   allocated for processing, Z_STREAM_ERROR if an invalid compression
+   level is supplied, Z_VERSION_ERROR if the version of zlib.h and the
+   version of the library linked do not match, or Z_ERRNO if there is
+   an error reading or writing the files. */
+int def(FILE *source, FILE *dest, int level)
+{
+    int ret, flush;
+    unsigned have;
+    z_stream strm;
+    char in[CHUNK];
+    char out[CHUNK];
+
+    /* allocate deflate state */
+    strm.zalloc = Z_NULL;
+    strm.zfree = Z_NULL;
+    strm.opaque = Z_NULL;
+    ret = deflateInit(&strm, level);
+    if (ret != Z_OK)
+        return ret;
+
+    /* compress until end of file */
+    do {
+        strm.avail_in = fread(in, 1, CHUNK, source);
+        if (ferror(source)) {
+            (void)deflateEnd(&strm);
+            return Z_ERRNO;
+        }
+        flush = feof(source) ? Z_FINISH : Z_NO_FLUSH;
+        strm.next_in = in;
+
+        /* run deflate() on input until output buffer not full, finish
+           compression if all of source has been read in */
+        do {
+            strm.avail_out = CHUNK;
+            strm.next_out = out;
+            ret = deflate(&strm, flush);    /* no bad return value */
+            assert(ret != Z_STREAM_ERROR);  /* state not clobbered */
+            have = CHUNK - strm.avail_out;
+            if (fwrite(out, 1, have, dest) != have || ferror(dest)) {
+                (void)deflateEnd(&strm);
+                return Z_ERRNO;
+            }
+        } while (strm.avail_out == 0);
+        assert(strm.avail_in == 0);     /* all input will be used */
+
+        /* done when last data in file processed */
+    } while (flush != Z_FINISH);
+    assert(ret == Z_STREAM_END);        /* stream will be complete */
+
+    /* clean up and return */
+    (void)deflateEnd(&strm);
+    return Z_OK;
+}
+
+/* Decompress from file source to file dest until stream ends or EOF.
+   inf() returns Z_OK on success, Z_MEM_ERROR if memory could not be
+   allocated for processing, Z_DATA_ERROR if the deflate data is
+   invalid or incomplete, Z_VERSION_ERROR if the version of zlib.h and
+   the version of the library linked do not match, or Z_ERRNO if there
+   is an error reading or writing the files. */
+int inf(FILE *source, FILE *dest)
+{
+    int ret;
+    unsigned have;
+    z_stream strm;
+    char in[CHUNK];
+    char out[CHUNK];
+
+    /* allocate inflate state */
+    strm.zalloc = Z_NULL;
+    strm.zfree = Z_NULL;
+    strm.opaque = Z_NULL;
+    strm.avail_in = 0;
+    strm.next_in = Z_NULL;
+    ret = inflateInit(&strm);
+    if (ret != Z_OK)
+        return ret;
+
+    /* decompress until deflate stream ends or end of file */
+    do {
+        strm.avail_in = fread(in, 1, CHUNK, source);
+        if (ferror(source)) {
+            (void)inflateEnd(&strm);
+            return Z_ERRNO;
+        }
+        if (strm.avail_in == 0)
+            break;
+        strm.next_in = in;
+
+        /* run inflate() on input until output buffer not full */
+        do {
+            strm.avail_out = CHUNK;
+            strm.next_out = out;
+            ret = inflate(&strm, Z_NO_FLUSH);
+            assert(ret != Z_STREAM_ERROR);  /* state not clobbered */
+            switch (ret) {
+            case Z_NEED_DICT:
+                ret = Z_DATA_ERROR;     /* and fall through */
+            case Z_DATA_ERROR:
+            case Z_MEM_ERROR:
+                (void)inflateEnd(&strm);
+                return ret;
+            }
+            have = CHUNK - strm.avail_out;
+            if (fwrite(out, 1, have, dest) != have || ferror(dest)) {
+                (void)inflateEnd(&strm);
+                return Z_ERRNO;
+            }
+        } while (strm.avail_out == 0);
+
+        /* done when inflate() says it's done */
+    } while (ret != Z_STREAM_END);
+
+    /* clean up and return */
+    (void)inflateEnd(&strm);
+    return ret == Z_STREAM_END ? Z_OK : Z_DATA_ERROR;
+}
+
+/* report a zlib or i/o error */
+void zerr(int ret)
+{
+    fputs("zpipe: ", stderr);
+    switch (ret) {
+    case Z_ERRNO:
+        if (ferror(stdin))
+            fputs("error reading stdin\n", stderr);
+        if (ferror(stdout))
+            fputs("error writing stdout\n", stderr);
+        break;
+    case Z_STREAM_ERROR:
+        fputs("invalid compression level\n", stderr);
+        break;
+    case Z_DATA_ERROR:
+        fputs("invalid or incomplete deflate data\n", stderr);
+        break;
+    case Z_MEM_ERROR:
+        fputs("out of memory\n", stderr);
+        break;
+    case Z_VERSION_ERROR:
+        fputs("zlib version mismatch!\n", stderr);
+    }
+}
+
+/* compress or decompress from stdin to stdout */
+int main(int argc, char **argv)
+{
+    int ret;
+
+    /* do compression if no arguments */
+    if (argc == 1) {
+        ret = def(stdin, stdout, Z_DEFAULT_COMPRESSION);
+        if (ret != Z_OK)
+            zerr(ret);
+        return ret;
+    }
+
+    /* do decompression if -d specified */
+    else if (argc == 2 && strcmp(argv[1], "-d") == 0) {
+        ret = inf(stdin, stdout);
+        if (ret != Z_OK)
+            zerr(ret);
+        return ret;
+    }
+
+    /* otherwise, report usage */
+    else {
+        fputs("zpipe usage: zpipe [-d] < source > dest\n", stderr);
+        return 1;
+    }
+}

gzio.c

@@ -1,5 +1,5 @@
 /* gzio.c -- IO on .gz files
- * Copyright (C) 1995-2003 Jean-loup Gailly.
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  *
  * Compile this file with -DNO_GZCOMPRESS to avoid the compression code.
@@ -11,7 +11,7 @@
 
 #include "zutil.h"
 
-#ifdef NO_DEFLATE       /* for compatiblity with old definition */
+#ifdef NO_DEFLATE       /* for compatibility with old definition */
 #  define NO_GZCOMPRESS
 #endif
 
@@ -220,7 +220,7 @@ gzFile ZEXPORT gzdopen (fd, mode)
     int fd;
     const char *mode;
 {
-    char name[20];
+    char name[46];      /* allow for up to 128-bit integers */
 
     if (fd < 0) return (gzFile)Z_NULL;
     sprintf(name, "<fd:%d>", fd); /* for debugging */
@@ -264,7 +264,7 @@ local int get_byte(s)
     if (s->z_eof) return EOF;
     if (s->stream.avail_in == 0) {
         errno = 0;
-        s->stream.avail_in = fread(s->inbuf, 1, Z_BUFSIZE, s->file);
+        s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file);
         if (s->stream.avail_in == 0) {
             s->z_eof = 1;
             if (ferror(s->file)) s->z_err = Z_ERRNO;
@@ -300,7 +300,7 @@ local void check_header(s)
     if (len < 2) {
         if (len) s->inbuf[0] = s->stream.next_in[0];
         errno = 0;
-        len = fread(s->inbuf + len, 1, Z_BUFSIZE >> len, s->file);
+        len = (uInt)fread(s->inbuf + len, 1, Z_BUFSIZE >> len, s->file);
         if (len == 0 && ferror(s->file)) s->z_err = Z_ERRNO;
         s->stream.avail_in += len;
         s->stream.next_in = s->inbuf;
@@ -415,6 +415,7 @@ int ZEXPORT gzread (file, buf, len)
         s->stream.avail_out--;
         s->back = EOF;
         s->out++;
+        start++;
         if (s->last) {
             s->z_err = Z_STREAM_END;
             return 1;
@@ -436,8 +437,8 @@ int ZEXPORT gzread (file, buf, len)
                 s->stream.avail_in  -= n;
             }
             if (s->stream.avail_out > 0) {
-                s->stream.avail_out -= fread(next_out, 1, s->stream.avail_out,
+                s->stream.avail_out -=
-                                             s->file);
+                    (uInt)fread(next_out, 1, s->stream.avail_out, s->file);
             }
             len -= s->stream.avail_out;
             s->in  += len;
@@ -448,7 +449,7 @@ int ZEXPORT gzread (file, buf, len)
         if (s->stream.avail_in == 0 && !s->z_eof) {
 
             errno = 0;
-            s->stream.avail_in = fread(s->inbuf, 1, Z_BUFSIZE, s->file);
+            s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file);
             if (s->stream.avail_in == 0) {
                 s->z_eof = 1;
                 if (ferror(s->file)) {
@@ -898,6 +899,18 @@ int ZEXPORT gzeof (file)
     return s->z_err == Z_STREAM_END;
 }
 
+/* ===========================================================================
+     Returns 1 if reading and doing so transparently, otherwise zero.
+*/
+int ZEXPORT gzdirect (file)
+    gzFile file;
+{
+    gz_stream *s = (gz_stream*)file;
+
+    if (s == NULL || s->mode != 'r') return 0;
+    return s->transparent;
+}
+
 /* ===========================================================================
    Outputs a long in LSB order to the given file
 */
@@ -937,7 +950,6 @@ local uLong getLong (s)
 int ZEXPORT gzclose (file)
     gzFile file;
 {
-    int err;
     gz_stream *s = (gz_stream*)file;
 
     if (s == NULL) return Z_STREAM_ERROR;
@@ -946,8 +958,8 @@ int ZEXPORT gzclose (file)
 #ifdef NO_GZCOMPRESS
         return Z_STREAM_ERROR;
 #else
-        err = do_flush (file, Z_FINISH);
+        if (do_flush (file, Z_FINISH) != Z_OK)
-        if (err != Z_OK) return destroy((gz_stream*)file);
+            return destroy((gz_stream*)file);
 
         putLong (s->file, s->crc);
         putLong (s->file, (uLong)(s->in & 0xffffffff));
@@ -956,6 +968,12 @@ int ZEXPORT gzclose (file)
     return destroy((gz_stream*)file);
 }
 
+#ifdef STDC
+#  define zstrerror(errnum) strerror(errnum)
+#else
+#  define zstrerror(errnum) ""
+#endif
+
 /* ===========================================================================
      Returns the error message for the last error which occured on the
    given compressed file. errnum is set to zlib error number. If an