zlib 1.2.5

CMakeLists.txt

@@ -0,0 +1,190 @@
+cmake_minimum_required(VERSION 2.4.4)
+set(CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS ON)
+
+project(zlib C)
+
+if(NOT DEFINED BUILD_SHARED_LIBS)
+    option(BUILD_SHARED_LIBS "Build a shared library form of zlib" ON)
+endif()
+
+include(CheckTypeSize)
+include(CheckFunctionExists)
+include(CheckIncludeFile)
+include(CheckCSourceCompiles)
+enable_testing()
+
+check_include_file(sys/types.h HAVE_SYS_TYPES_H)
+check_include_file(stdint.h    HAVE_STDINT_H)
+check_include_file(stddef.h    HAVE_STDDEF_H)
+
+#
+# Check to see if we have large file support
+#
+set(CMAKE_REQUIRED_DEFINITIONS -D_LARGEFILE64_SOURCE=1)
+# We add these other definitions here because CheckTypeSize.cmake
+# in CMake 2.4.x does not automatically do so and we want
+# compatibility with CMake 2.4.x.
+if(HAVE_SYS_TYPES_H)
+    list(APPEND CMAKE_REQUIRED_DEFINITIONS -DHAVE_SYS_TYPES_H)
+endif()
+if(HAVE_STDINT_H)
+    list(APPEND CMAKE_REQUIRED_DEFINITIONS -DHAVE_STDINT_H)
+endif()
+if(HAVE_STDDEF_H)
+    list(APPEND CMAKE_REQUIRED_DEFINITIONS -DHAVE_STDDEF_H)
+endif()
+check_type_size(off64_t OFF64_T)
+if(HAVE_OFF64_T)
+   add_definitions(-D_LARGEFILE64_SOURCE=1)
+endif()
+set(CMAKE_REQUIRED_DEFINITIONS) # clear variable
+
+#
+# Check for fseeko
+#
+check_function_exists(fseeko HAVE_FSEEKO)
+if(NOT HAVE_FSEEKO)
+    add_definitions(-DNO_FSEEKO)
+endif()
+
+#
+# Check for unistd.h
+#
+check_include_file(unistd.h Z_HAVE_UNISTD_H)
+
+if(MSVC)
+    set(CMAKE_DEBUG_POSTFIX "d")
+    add_definitions(-D_CRT_SECURE_NO_DEPRECATE)
+    add_definitions(-D_CRT_NONSTDC_NO_DEPRECATE)
+endif()
+
+if(NOT CMAKE_CURRENT_SOURCE_DIR STREQUAL CMAKE_CURRENT_BINARY_DIR)
+    # If we're doing an out of source build and the user has a zconf.h
+    # in their source tree...
+    if(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h)
+        message(FATAL_ERROR
+            "You must remove ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h "
+            "from the source tree.  This file is included with zlib "
+            "but CMake generates this file for you automatically "
+            "in the build directory.")
+  endif()
+endif()
+
+configure_file(${CMAKE_CURRENT_SOURCE_DIR}/zconf.h.cmakein
+               ${CMAKE_CURRENT_BINARY_DIR}/zconf.h @ONLY)
+include_directories(${CMAKE_CURRENT_BINARY_DIR})
+
+
+#============================================================================
+# zlib
+#============================================================================
+
+set(ZLIB_PUBLIC_HDRS
+    ${CMAKE_CURRENT_BINARY_DIR}/zconf.h
+    zlib.h
+)
+set(ZLIB_PRIVATE_HDRS
+    crc32.h
+    deflate.h
+    gzguts.h
+    inffast.h
+    inffixed.h
+    inflate.h
+    inftrees.h
+    trees.h
+    zutil.h
+)
+set(ZLIB_SRCS
+    adler32.c
+    compress.c
+    crc32.c
+    deflate.c
+    gzclose.c
+    gzlib.c
+    gzread.c
+    gzwrite.c
+    inflate.c
+    infback.c
+    inftrees.c
+    inffast.c
+    trees.c
+    uncompr.c
+    zutil.c
+    win32/zlib1.rc
+)
+
+# parse the full version number from zlib.h and include in ZLIB_FULL_VERSION
+file(READ ${CMAKE_CURRENT_SOURCE_DIR}/zlib.h _zlib_h_contents)
+string(REGEX REPLACE ".*#define[ \t]+ZLIB_VERSION[ \t]+\"([0-9A-Za-z.]+)\".*"
+    "\\1" ZLIB_FULL_VERSION ${_zlib_h_contents})
+
+if(MINGW)
+    # This gets us DLL resource information when compiling on MinGW.
+    add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/zlib1rc.obj
+                       COMMAND windres.exe
+                            -D GCC_WINDRES
+                            -I ${CMAKE_CURRENT_SOURCE_DIR}
+                            -I ${CMAKE_CURRENT_BINARY_DIR}
+                            -o ${CMAKE_CURRENT_BINARY_DIR}/zlib1rc.obj
+                            -i ${CMAKE_CURRENT_SOURCE_DIR}/win32/zlib1.rc)
+    set(ZLIB_SRCS ${ZLIB_SRCS} ${CMAKE_CURRENT_BINARY_DIR}/zlib1rc.obj)
+endif(MINGW)
+
+add_library(zlib ${ZLIB_SRCS} ${ZLIB_PUBLIC_HDRS} ${ZLIB_PRIVATE_HDRS})
+set_target_properties(zlib PROPERTIES DEFINE_SYMBOL ZLIB_DLL)
+
+set_target_properties(zlib PROPERTIES SOVERSION 1)
+
+if(NOT CYGWIN)
+    # This property causes shared libraries on Linux to have the full version
+    # encoded into their final filename.  We disable this on Cygwin because
+    # it causes cygz-${ZLIB_FULL_VERSION}.dll to be created when cygz.dll
+    # seems to be the default.
+    #
+    # This has no effect with MSVC, on that platform the version info for
+    # the DLL comes from the resource file win32/zlib1.rc
+    set_target_properties(zlib PROPERTIES VERSION ${ZLIB_FULL_VERSION})
+endif()
+
+if(UNIX)
+    # On unix-like platforms the library is almost always called libz
+   set_target_properties(zlib PROPERTIES OUTPUT_NAME z)
+elseif(BUILD_SHARED_LIBS AND WIN32)
+    # Creates zlib1.dll when building shared library version
+    set_target_properties(zlib PROPERTIES SUFFIX "1.dll")
+endif()
+
+if(NOT SKIP_INSTALL_LIBRARIES AND NOT SKIP_INSTALL_ALL )
+    install(TARGETS zlib
+        RUNTIME DESTINATION bin
+        ARCHIVE DESTINATION lib
+        LIBRARY DESTINATION lib )
+endif()
+if(NOT SKIP_INSTALL_HEADERS AND NOT SKIP_INSTALL_ALL )
+    install(FILES ${ZLIB_PUBLIC_HDRS} DESTINATION include)
+endif()
+if(NOT SKIP_INSTALL_FILES AND NOT SKIP_INSTALL_ALL )
+    install(FILES zlib.3 DESTINATION share/man/man3)
+endif()
+
+#============================================================================
+# Example binaries
+#============================================================================
+
+add_executable(example example.c)
+target_link_libraries(example zlib)
+add_test(example example)
+
+add_executable(minigzip minigzip.c)
+target_link_libraries(minigzip zlib)
+
+if(HAVE_OFF64_T)
+    add_executable(example64 example.c)
+    target_link_libraries(example64 zlib)
+    set_target_properties(example64 PROPERTIES COMPILE_FLAGS "-D_FILE_OFFSET_BITS=64")
+    add_test(example64 example64)
+
+    add_executable(minigzip64 minigzip.c)
+    target_link_libraries(minigzip64 zlib)
+    set_target_properties(minigzip64 PROPERTIES COMPILE_FLAGS "-D_FILE_OFFSET_BITS=64")
+endif()

ChangeLog

@@ -1,6 +1,492 @@
 
                 ChangeLog file for zlib
 
+Changes in 1.2.5 (19 Apr 2010)
+- Disable visibility attribute in win32/Makefile.gcc [Bar-Lev]
+- Default to libdir as sharedlibdir in configure [Nieder]
+- Update copyright dates on modified source files
+- Update trees.c to be able to generate modified trees.h
+- Exit configure for MinGW, suggesting win32/Makefile.gcc
+
+Changes in 1.2.4.5 (18 Apr 2010)
+- Set sharedlibdir in configure [Torok]
+- Set LDFLAGS in Makefile.in [Bar-Lev]
+- Avoid mkdir objs race condition in Makefile.in [Bowler]
+- Add ZLIB_INTERNAL in front of internal inter-module functions and arrays
+- Define ZLIB_INTERNAL to hide internal functions and arrays for GNU C
+- Don't use hidden attribute when it is a warning generator (e.g. Solaris)
+
+Changes in 1.2.4.4 (18 Apr 2010)
+- Fix CROSS_PREFIX executable testing, CHOST extract, mingw* [Torok]
+- Undefine _LARGEFILE64_SOURCE in zconf.h if it is zero, but not if empty
+- Try to use bash or ksh regardless of functionality of /bin/sh
+- Fix configure incompatibility with NetBSD sh
+- Remove attempt to run under bash or ksh since have better NetBSD fix
+- Fix win32/Makefile.gcc for MinGW [Bar-Lev]
+- Add diagnostic messages when using CROSS_PREFIX in configure
+- Added --sharedlibdir option to configure [Weigelt]
+- Use hidden visibility attribute when available [Frysinger]
+
+Changes in 1.2.4.3 (10 Apr 2010)
+- Only use CROSS_PREFIX in configure for ar and ranlib if they exist
+- Use CROSS_PREFIX for nm [Bar-Lev]
+- Assume _LARGEFILE64_SOURCE defined is equivalent to true
+- Avoid use of undefined symbols in #if with && and ||
+- Make *64 prototypes in gzguts.h consistent with functions
+- Add -shared load option for MinGW in configure [Bowler]
+- Move z_off64_t to public interface, use instead of off64_t
+- Remove ! from shell test in configure (not portable to Solaris)
+- Change +0 macro tests to -0 for possibly increased portability
+
+Changes in 1.2.4.2 (9 Apr 2010)
+- Add consistent carriage returns to readme.txt's in masmx86 and masmx64
+- Really provide prototypes for *64 functions when building without LFS
+- Only define unlink() in minigzip.c if unistd.h not included
+- Update README to point to contrib/vstudio project files
+- Move projects/vc6 to old/ and remove projects/
+- Include stdlib.h in minigzip.c for setmode() definition under WinCE
+- Clean up assembler builds in win32/Makefile.msc [Rowe]
+- Include sys/types.h for Microsoft for off_t definition
+- Fix memory leak on error in gz_open()
+- Symbolize nm as $NM in configure [Weigelt]
+- Use TEST_LDSHARED instead of LDSHARED to link test programs [Weigelt]
+- Add +0 to _FILE_OFFSET_BITS and _LFS64_LARGEFILE in case not defined
+- Fix bug in gzeof() to take into account unused input data
+- Avoid initialization of structures with variables in puff.c
+- Updated win32/README-WIN32.txt [Rowe]
+
+Changes in 1.2.4.1 (28 Mar 2010)
+- Remove the use of [a-z] constructs for sed in configure [gentoo 310225]
+- Remove $(SHAREDLIB) from LIBS in Makefile.in [Creech]
+- Restore "for debugging" comment on sprintf() in gzlib.c
+- Remove fdopen for MVS from gzguts.h
+- Put new README-WIN32.txt in win32 [Rowe]
+- Add check for shell to configure and invoke another shell if needed
+- Fix big fat stinking bug in gzseek() on uncompressed files
+- Remove vestigial F_OPEN64 define in zutil.h
+- Set and check the value of _LARGEFILE_SOURCE and _LARGEFILE64_SOURCE
+- Avoid errors on non-LFS systems when applications define LFS macros
+- Set EXE to ".exe" in configure for MINGW [Kahle]
+- Match crc32() in crc32.c exactly to the prototype in zlib.h [Sherrill]
+- Add prefix for cross-compilation in win32/makefile.gcc [Bar-Lev]
+- Add DLL install in win32/makefile.gcc [Bar-Lev]
+- Allow Linux* or linux* from uname in configure [Bar-Lev]
+- Allow ldconfig to be redefined in configure and Makefile.in [Bar-Lev]
+- Add cross-compilation prefixes to configure [Bar-Lev]
+- Match type exactly in gz_load() invocation in gzread.c
+- Match type exactly of zcalloc() in zutil.c to zlib.h alloc_func
+- Provide prototypes for *64 functions when building zlib without LFS
+- Don't use -lc when linking shared library on MinGW
+- Remove errno.h check in configure and vestigial errno code in zutil.h
+
+Changes in 1.2.4 (14 Mar 2010)
+- Fix VER3 extraction in configure for no fourth subversion
+- Update zlib.3, add docs to Makefile.in to make .pdf out of it
+- Add zlib.3.pdf to distribution
+- Don't set error code in gzerror() if passed pointer is NULL
+- Apply destination directory fixes to CMakeLists.txt [Lowman]
+- Move #cmakedefine's to a new zconf.in.cmakein
+- Restore zconf.h for builds that don't use configure or cmake
+- Add distclean to dummy Makefile for convenience
+- Update and improve INDEX, README, and FAQ
+- Update CMakeLists.txt for the return of zconf.h [Lowman]
+- Update contrib/vstudio/vc9 and vc10 [Vollant]
+- Change libz.dll.a back to libzdll.a in win32/Makefile.gcc
+- Apply license and readme changes to contrib/asm686 [Raiter]
+- Check file name lengths and add -c option in minigzip.c [Li]
+- Update contrib/amd64 and contrib/masmx86/ [Vollant]
+- Avoid use of "eof" parameter in trees.c to not shadow library variable
+- Update make_vms.com for removal of zlibdefs.h [Zinser]
+- Update assembler code and vstudio projects in contrib [Vollant]
+- Remove outdated assembler code contrib/masm686 and contrib/asm586
+- Remove old vc7 and vc8 from contrib/vstudio
+- Update win32/Makefile.msc, add ZLIB_VER_SUBREVISION [Rowe]
+- Fix memory leaks in gzclose_r() and gzclose_w(), file leak in gz_open()
+- Add contrib/gcc_gvmat64 for longest_match and inflate_fast [Vollant]
+- Remove *64 functions from win32/zlib.def (they're not 64-bit yet)
+- Fix bug in void-returning vsprintf() case in gzwrite.c
+- Fix name change from inflate.h in contrib/inflate86/inffas86.c
+- Check if temporary file exists before removing in make_vms.com [Zinser]
+- Fix make install and uninstall for --static option
+- Fix usage of _MSC_VER in gzguts.h and zutil.h [Truta]
+- Update readme.txt in contrib/masmx64 and masmx86 to assemble
+
+Changes in 1.2.3.9 (21 Feb 2010)
+- Expunge gzio.c
+- Move as400 build information to old
+- Fix updates in contrib/minizip and contrib/vstudio
+- Add const to vsnprintf test in configure to avoid warnings [Weigelt]
+- Delete zconf.h (made by configure) [Weigelt]
+- Change zconf.in.h to zconf.h.in per convention [Weigelt]
+- Check for NULL buf in gzgets()
+- Return empty string for gzgets() with len == 1 (like fgets())
+- Fix description of gzgets() in zlib.h for end-of-file, NULL return
+- Update minizip to 1.1 [Vollant]
+- Avoid MSVC loss of data warnings in gzread.c, gzwrite.c
+- Note in zlib.h that gzerror() should be used to distinguish from EOF
+- Remove use of snprintf() from gzlib.c
+- Fix bug in gzseek()
+- Update contrib/vstudio, adding vc9 and vc10 [Kuno, Vollant]
+- Fix zconf.h generation in CMakeLists.txt [Lowman]
+- Improve comments in zconf.h where modified by configure
+
+Changes in 1.2.3.8 (13 Feb 2010)
+- Clean up text files (tabs, trailing whitespace, etc.) [Oberhumer]
+- Use z_off64_t in gz_zero() and gz_skip() to match state->skip
+- Avoid comparison problem when sizeof(int) == sizeof(z_off64_t)
+- Revert to Makefile.in from 1.2.3.6 (live with the clutter)
+- Fix missing error return in gzflush(), add zlib.h note
+- Add *64 functions to zlib.map [Levin]
+- Fix signed/unsigned comparison in gz_comp()
+- Use SFLAGS when testing shared linking in configure
+- Add --64 option to ./configure to use -m64 with gcc
+- Fix ./configure --help to correctly name options
+- Have make fail if a test fails [Levin]
+- Avoid buffer overrun in contrib/masmx64/gvmat64.asm [Simpson]
+- Remove assembler object files from contrib
+
+Changes in 1.2.3.7 (24 Jan 2010)
+- Always gzopen() with O_LARGEFILE if available
+- Fix gzdirect() to work immediately after gzopen() or gzdopen()
+- Make gzdirect() more precise when the state changes while reading
+- Improve zlib.h documentation in many places
+- Catch memory allocation failure in gz_open()
+- Complete close operation if seek forward in gzclose_w() fails
+- Return Z_ERRNO from gzclose_r() if close() fails
+- Return Z_STREAM_ERROR instead of EOF for gzclose() being passed NULL
+- Return zero for gzwrite() errors to match zlib.h description
+- Return -1 on gzputs() error to match zlib.h description
+- Add zconf.in.h to allow recovery from configure modification [Weigelt]
+- Fix static library permissions in Makefile.in [Weigelt]
+- Avoid warnings in configure tests that hide functionality [Weigelt]
+- Add *BSD and DragonFly to Linux case in configure [gentoo 123571]
+- Change libzdll.a to libz.dll.a in win32/Makefile.gcc [gentoo 288212]
+- Avoid access of uninitialized data for first inflateReset2 call [Gomes]
+- Keep object files in subdirectories to reduce the clutter somewhat
+- Remove default Makefile and zlibdefs.h, add dummy Makefile
+- Add new external functions to Z_PREFIX, remove duplicates, z_z_ -> z_
+- Remove zlibdefs.h completely -- modify zconf.h instead
+
+Changes in 1.2.3.6 (17 Jan 2010)
+- Avoid void * arithmetic in gzread.c and gzwrite.c
+- Make compilers happier with const char * for gz_error message
+- Avoid unused parameter warning in inflate.c
+- Avoid signed-unsigned comparison warning in inflate.c
+- Indent #pragma's for traditional C
+- Fix usage of strwinerror() in glib.c, change to gz_strwinerror()
+- Correct email address in configure for system options
+- Update make_vms.com and add make_vms.com to contrib/minizip [Zinser]
+- Update zlib.map [Brown]
+- Fix Makefile.in for Solaris 10 make of example64 and minizip64 [Torok]
+- Apply various fixes to CMakeLists.txt [Lowman]
+- Add checks on len in gzread() and gzwrite()
+- Add error message for no more room for gzungetc()
+- Remove zlib version check in gzwrite()
+- Defer compression of gzprintf() result until need to
+- Use snprintf() in gzdopen() if available
+- Remove USE_MMAP configuration determination (only used by minigzip)
+- Remove examples/pigz.c (available separately)
+- Update examples/gun.c to 1.6
+
+Changes in 1.2.3.5 (8 Jan 2010)
+- Add space after #if in zutil.h for some compilers
+- Fix relatively harmless bug in deflate_fast() [Exarevsky]
+- Fix same problem in deflate_slow()
+- Add $(SHAREDLIBV) to LIBS in Makefile.in [Brown]
+- Add deflate_rle() for faster Z_RLE strategy run-length encoding
+- Add deflate_huff() for faster Z_HUFFMAN_ONLY encoding
+- Change name of "write" variable in inffast.c to avoid library collisions
+- Fix premature EOF from gzread() in gzio.c [Brown]
+- Use zlib header window size if windowBits is 0 in inflateInit2()
+- Remove compressBound() call in deflate.c to avoid linking compress.o
+- Replace use of errno in gz* with functions, support WinCE [Alves]
+- Provide alternative to perror() in minigzip.c for WinCE [Alves]
+- Don't use _vsnprintf on later versions of MSVC [Lowman]
+- Add CMake build script and input file [Lowman]
+- Update contrib/minizip to 1.1 [Svensson, Vollant]
+- Moved nintendods directory from contrib to .
+- Replace gzio.c with a new set of routines with the same functionality
+- Add gzbuffer(), gzoffset(), gzclose_r(), gzclose_w() as part of above
+- Update contrib/minizip to 1.1b
+- Change gzeof() to return 0 on error instead of -1 to agree with zlib.h
+
+Changes in 1.2.3.4 (21 Dec 2009)
+- Use old school .SUFFIXES in Makefile.in for FreeBSD compatibility
+- Update comments in configure and Makefile.in for default --shared
+- Fix test -z's in configure [Marquess]
+- Build examplesh and minigzipsh when not testing
+- Change NULL's to Z_NULL's in deflate.c and in comments in zlib.h
+- Import LDFLAGS from the environment in configure
+- Fix configure to populate SFLAGS with discovered CFLAGS options
+- Adapt make_vms.com to the new Makefile.in [Zinser]
+- Add zlib2ansi script for C++ compilation [Marquess]
+- Add _FILE_OFFSET_BITS=64 test to make test (when applicable)
+- Add AMD64 assembler code for longest match to contrib [Teterin]
+- Include options from $SFLAGS when doing $LDSHARED
+- Simplify 64-bit file support by introducing z_off64_t type
+- Make shared object files in objs directory to work around old Sun cc
+- Use only three-part version number for Darwin shared compiles
+- Add rc option to ar in Makefile.in for when ./configure not run
+- Add -WI,-rpath,. to LDFLAGS for OSF 1 V4*
+- Set LD_LIBRARYN32_PATH for SGI IRIX shared compile
+- Protect against _FILE_OFFSET_BITS being defined when compiling zlib
+- Rename Makefile.in targets allstatic to static and allshared to shared
+- Fix static and shared Makefile.in targets to be independent
+- Correct error return bug in gz_open() by setting state [Brown]
+- Put spaces before ;;'s in configure for better sh compatibility
+- Add pigz.c (parallel implementation of gzip) to examples/
+- Correct constant in crc32.c to UL [Leventhal]
+- Reject negative lengths in crc32_combine()
+- Add inflateReset2() function to work like inflateEnd()/inflateInit2()
+- Include sys/types.h for _LARGEFILE64_SOURCE [Brown]
+- Correct typo in doc/algorithm.txt [Janik]
+- Fix bug in adler32_combine() [Zhu]
+- Catch missing-end-of-block-code error in all inflates and in puff
+    Assures that random input to inflate eventually results in an error
+- Added enough.c (calculation of ENOUGH for inftrees.h) to examples/
+- Update ENOUGH and its usage to reflect discovered bounds
+- Fix gzerror() error report on empty input file [Brown]
+- Add ush casts in trees.c to avoid pedantic runtime errors
+- Fix typo in zlib.h uncompress() description [Reiss]
+- Correct inflate() comments with regard to automatic header detection
+- Remove deprecation comment on Z_PARTIAL_FLUSH (it stays)
+- Put new version of gzlog (2.0) in examples with interruption recovery
+- Add puff compile option to permit invalid distance-too-far streams
+- Add puff TEST command options, ability to read piped input
+- Prototype the *64 functions in zlib.h when _FILE_OFFSET_BITS == 64, but
+  _LARGEFILE64_SOURCE not defined
+- Fix Z_FULL_FLUSH to truly erase the past by resetting s->strstart
+- Fix deflateSetDictionary() to use all 32K for output consistency
+- Remove extraneous #define MIN_LOOKAHEAD in deflate.c (in deflate.h)
+- Clear bytes after deflate lookahead to avoid use of uninitialized data
+- Change a limit in inftrees.c to be more transparent to Coverity Prevent
+- Update win32/zlib.def with exported symbols from zlib.h
+- Correct spelling error in zlib.h [Willem]
+- Allow Z_BLOCK for deflate() to force a new block
+- Allow negative bits in inflatePrime() to delete existing bit buffer
+- Add Z_TREES flush option to inflate() to return at end of trees
+- Add inflateMark() to return current state information for random access
+- Add Makefile for NintendoDS to contrib [Costa]
+- Add -w in configure compile tests to avoid spurious warnings [Beucler]
+- Fix typos in zlib.h comments for deflateSetDictionary()
+- Fix EOF detection in transparent gzread() [Maier]
+
+Changes in 1.2.3.3 (2 October 2006)
+- Make --shared the default for configure, add a --static option
+- Add compile option to permit invalid distance-too-far streams
+- Add inflateUndermine() function which is required to enable above
+- Remove use of "this" variable name for C++ compatibility [Marquess]
+- Add testing of shared library in make test, if shared library built
+- Use ftello() and fseeko() if available instead of ftell() and fseek()
+- Provide two versions of all functions that use the z_off_t type for
+  binary compatibility -- a normal version and a 64-bit offset version,
+  per the Large File Support Extension when _LARGEFILE64_SOURCE is
+  defined; use the 64-bit versions by default when _FILE_OFFSET_BITS
+  is defined to be 64
+- Add a --uname= option to configure to perhaps help with cross-compiling
+
+Changes in 1.2.3.2 (3 September 2006)
+- Turn off silly Borland warnings [Hay]
+- Use off64_t and define _LARGEFILE64_SOURCE when present
+- Fix missing dependency on inffixed.h in Makefile.in
+- Rig configure --shared to build both shared and static [Teredesai, Truta]
+- Remove zconf.in.h and instead create a new zlibdefs.h file
+- Fix contrib/minizip/unzip.c non-encrypted after encrypted [Vollant]
+- Add treebuild.xml (see http://treebuild.metux.de/) [Weigelt]
+
+Changes in 1.2.3.1 (16 August 2006)
+- Add watcom directory with OpenWatcom make files [Daniel]
+- Remove #undef of FAR in zconf.in.h for MVS [Fedtke]
+- Update make_vms.com [Zinser]
+- Use -fPIC for shared build in configure [Teredesai, Nicholson]
+- Use only major version number for libz.so on IRIX and OSF1 [Reinholdtsen]
+- Use fdopen() (not _fdopen()) for Interix in zutil.h [B<>ck]
+- Add some FAQ entries about the contrib directory
+- Update the MVS question in the FAQ
+- Avoid extraneous reads after EOF in gzio.c [Brown]
+- Correct spelling of "successfully" in gzio.c [Randers-Pehrson]
+- Add comments to zlib.h about gzerror() usage [Brown]
+- Set extra flags in gzip header in gzopen() like deflate() does
+- Make configure options more compatible with double-dash conventions
+  [Weigelt]
+- Clean up compilation under Solaris SunStudio cc [Rowe, Reinholdtsen]
+- Fix uninstall target in Makefile.in [Truta]
+- Add pkgconfig support [Weigelt]
+- Use $(DESTDIR) macro in Makefile.in [Reinholdtsen, Weigelt]
+- Replace set_data_type() with a more accurate detect_data_type() in
+  trees.c, according to the txtvsbin.txt document [Truta]
+- Swap the order of #include <stdio.h> and #include "zlib.h" in
+  gzio.c, example.c and minigzip.c [Truta]
+- Shut up annoying VS2005 warnings about standard C deprecation [Rowe,
+  Truta] (where?)
+- Fix target "clean" from win32/Makefile.bor [Truta]
+- Create .pdb and .manifest files in win32/makefile.msc [Ziegler, Rowe]
+- Update zlib www home address in win32/DLL_FAQ.txt [Truta]
+- Update contrib/masmx86/inffas32.asm for VS2005 [Vollant, Van Wassenhove]
+- Enable browse info in the "Debug" and "ASM Debug" configurations in
+  the Visual C++ 6 project, and set (non-ASM) "Debug" as default [Truta]
+- Add pkgconfig support [Weigelt]
+- Add ZLIB_VER_MAJOR, ZLIB_VER_MINOR and ZLIB_VER_REVISION in zlib.h,
+  for use in win32/zlib1.rc [Polushin, Rowe, Truta]
+- Add a document that explains the new text detection scheme to
+  doc/txtvsbin.txt [Truta]
+- Add rfc1950.txt, rfc1951.txt and rfc1952.txt to doc/ [Truta]
+- Move algorithm.txt into doc/ [Truta]
+- Synchronize FAQ with website
+- Fix compressBound(), was low for some pathological cases [Fearnley]
+- Take into account wrapper variations in deflateBound()
+- Set examples/zpipe.c input and output to binary mode for Windows
+- Update examples/zlib_how.html with new zpipe.c (also web site)
+- Fix some warnings in examples/gzlog.c and examples/zran.c (it seems
+  that gcc became pickier in 4.0)
+- Add zlib.map for Linux: "All symbols from zlib-1.1.4 remain
+  un-versioned, the patch adds versioning only for symbols introduced in
+  zlib-1.2.0 or later.  It also declares as local those symbols which are
+  not designed to be exported." [Levin]
+- Update Z_PREFIX list in zconf.in.h, add --zprefix option to configure
+- Do not initialize global static by default in trees.c, add a response
+  NO_INIT_GLOBAL_POINTERS to initialize them if needed [Marquess]
+- Don't use strerror() in gzio.c under WinCE [Yakimov]
+- Don't use errno.h in zutil.h under WinCE [Yakimov]
+- Move arguments for AR to its usage to allow replacing ar [Marot]
+- Add HAVE_VISIBILITY_PRAGMA in zconf.in.h for Mozilla [Randers-Pehrson]
+- Improve inflateInit() and inflateInit2() documentation
+- Fix structure size comment in inflate.h
+- Change configure help option from --h* to --help [Santos]
+
+Changes in 1.2.3 (18 July 2005)
+- Apply security vulnerability fixes to contrib/infback9 as well
+- Clean up some text files (carriage returns, trailing space)
+- Update testzlib, vstudio, masmx64, and masmx86 in contrib [Vollant]
+
+Changes in 1.2.2.4 (11 July 2005)
+- Add inflatePrime() function for starting inflation at bit boundary
+- Avoid some Visual C warnings in deflate.c
+- Avoid more silly Visual C warnings in inflate.c and inftrees.c for 64-bit
+  compile
+- Fix some spelling errors in comments [Betts]
+- Correct inflateInit2() error return documentation in zlib.h
+- Add zran.c example of compressed data random access to examples
+  directory, shows use of inflatePrime()
+- Fix cast for assignments to strm->state in inflate.c and infback.c
+- Fix zlibCompileFlags() in zutil.c to use 1L for long shifts [Oberhumer]
+- Move declarations of gf2 functions to right place in crc32.c [Oberhumer]
+- Add cast in trees.c t avoid a warning [Oberhumer]
+- Avoid some warnings in fitblk.c, gun.c, gzjoin.c in examples [Oberhumer]
+- Update make_vms.com [Zinser]
+- Initialize state->write in inflateReset() since copied in inflate_fast()
+- Be more strict on incomplete code sets in inflate_table() and increase
+  ENOUGH and MAXD -- this repairs a possible security vulnerability for
+  invalid inflate input.  Thanks to Tavis Ormandy and Markus Oberhumer for
+  discovering the vulnerability and providing test cases.
+- Add ia64 support to configure for HP-UX [Smith]
+- Add error return to gzread() for format or i/o error [Levin]
+- Use malloc.h for OS/2 [Necasek]
+
+Changes in 1.2.2.3 (27 May 2005)
+- Replace 1U constants in inflate.c and inftrees.c for 64-bit compile
+- Typecast fread() return values in gzio.c [Vollant]
+- Remove trailing space in minigzip.c outmode (VC++ can't deal with it)
+- Fix crc check bug in gzread() after gzungetc() [Heiner]
+- Add the deflateTune() function to adjust internal compression parameters
+- Add a fast gzip decompressor, gun.c, to examples (use of inflateBack)
+- Remove an incorrect assertion in examples/zpipe.c
+- Add C++ wrapper in infback9.h [Donais]
+- Fix bug in inflateCopy() when decoding fixed codes
+- Note in zlib.h how much deflateSetDictionary() actually uses
+- Remove USE_DICT_HEAD in deflate.c (would mess up inflate if used)
+- Add _WIN32_WCE to define WIN32 in zconf.in.h [Spencer]
+- Don't include stderr.h or errno.h for _WIN32_WCE in zutil.h [Spencer]
+- Add gzdirect() function to indicate transparent reads
+- Update contrib/minizip [Vollant]
+- Fix compilation of deflate.c when both ASMV and FASTEST [Oberhumer]
+- Add casts in crc32.c to avoid warnings [Oberhumer]
+- Add contrib/masmx64 [Vollant]
+- Update contrib/asm586, asm686, masmx86, testzlib, vstudio [Vollant]
+
+Changes in 1.2.2.2 (30 December 2004)
+- Replace structure assignments in deflate.c and inflate.c with zmemcpy to
+  avoid implicit memcpy calls (portability for no-library compilation)
+- Increase sprintf() buffer size in gzdopen() to allow for large numbers
+- Add INFLATE_STRICT to check distances against zlib header
+- Improve WinCE errno handling and comments [Chang]
+- Remove comment about no gzip header processing in FAQ
+- Add Z_FIXED strategy option to deflateInit2() to force fixed trees
+- Add updated make_vms.com [Coghlan], update README
+- Create a new "examples" directory, move gzappend.c there, add zpipe.c,
+  fitblk.c, gzlog.[ch], gzjoin.c, and zlib_how.html.
+- Add FAQ entry and comments in deflate.c on uninitialized memory access
+- Add Solaris 9 make options in configure [Gilbert]
+- Allow strerror() usage in gzio.c for STDC
+- Fix DecompressBuf in contrib/delphi/ZLib.pas [ManChesTer]
+- Update contrib/masmx86/inffas32.asm and gvmat32.asm [Vollant]
+- Use z_off_t for adler32_combine() and crc32_combine() lengths
+- Make adler32() much faster for small len
+- Use OS_CODE in deflate() default gzip header
+
+Changes in 1.2.2.1 (31 October 2004)
+- Allow inflateSetDictionary() call for raw inflate
+- Fix inflate header crc check bug for file names and comments
+- Add deflateSetHeader() and gz_header structure for custom gzip headers
+- Add inflateGetheader() to retrieve gzip headers
+- Add crc32_combine() and adler32_combine() functions
+- Add alloc_func, free_func, in_func, out_func to Z_PREFIX list
+- Use zstreamp consistently in zlib.h (inflate_back functions)
+- Remove GUNZIP condition from definition of inflate_mode in inflate.h
+  and in contrib/inflate86/inffast.S [Truta, Anderson]
+- Add support for AMD64 in contrib/inflate86/inffas86.c [Anderson]
+- Update projects/README.projects and projects/visualc6 [Truta]
+- Update win32/DLL_FAQ.txt [Truta]
+- Avoid warning under NO_GZCOMPRESS in gzio.c; fix typo [Truta]
+- Deprecate Z_ASCII; use Z_TEXT instead [Truta]
+- Use a new algorithm for setting strm->data_type in trees.c [Truta]
+- Do not define an exit() prototype in zutil.c unless DEBUG defined
+- Remove prototype of exit() from zutil.c, example.c, minigzip.c [Truta]
+- Add comment in zlib.h for Z_NO_FLUSH parameter to deflate()
+- Fix Darwin build version identification [Peterson]
+
+Changes in 1.2.2 (3 October 2004)
+- Update zlib.h comments on gzip in-memory processing
+- Set adler to 1 in inflateReset() to support Java test suite [Walles]
+- Add contrib/dotzlib [Ravn]
+- Update win32/DLL_FAQ.txt [Truta]
+- Update contrib/minizip [Vollant]
+- Move contrib/visual-basic.txt to old/ [Truta]
+- Fix assembler builds in projects/visualc6/ [Truta]
+
+Changes in 1.2.1.2 (9 September 2004)
+- Update INDEX file
+- Fix trees.c to update strm->data_type (no one ever noticed!)
+- Fix bug in error case in inflate.c, infback.c, and infback9.c [Brown]
+- Add "volatile" to crc table flag declaration (for DYNAMIC_CRC_TABLE)
+- Add limited multitasking protection to DYNAMIC_CRC_TABLE
+- Add NO_vsnprintf for VMS in zutil.h [Mozilla]
+- Don't declare strerror() under VMS [Mozilla]
+- Add comment to DYNAMIC_CRC_TABLE to use get_crc_table() to initialize
+- Update contrib/ada [Anisimkov]
+- Update contrib/minizip [Vollant]
+- Fix configure to not hardcode directories for Darwin [Peterson]
+- Fix gzio.c to not return error on empty files [Brown]
+- Fix indentation; update version in contrib/delphi/ZLib.pas and
+  contrib/pascal/zlibpas.pas [Truta]
+- Update mkasm.bat in contrib/masmx86 [Truta]
+- Update contrib/untgz [Truta]
+- Add projects/README.projects [Truta]
+- Add project for MS Visual C++ 6.0 in projects/visualc6 [Cadieux, Truta]
+- Update win32/DLL_FAQ.txt [Truta]
+- Update list of Z_PREFIX symbols in zconf.h [Randers-Pehrson, Truta]
+- Remove an unnecessary assignment to curr in inftrees.c [Truta]
+- Add OS/2 to exe builds in configure [Poltorak]
+- Remove err dummy parameter in zlib.h [Kientzle]
+
+Changes in 1.2.1.1 (9 January 2004)
+- Update email address in README
+- Several FAQ updates
+- Fix a big fat bug in inftrees.c that prevented decoding valid
+  dynamic blocks with only literals and no distance codes --
+  Thanks to "Hot Emu" for the bug report and sample file
+- Add a note to puff.c on no distance codes case.
+
 Changes in 1.2.1 (17 November 2003)
 - Remove a tab in contrib/gzappend/gzappend.c
 - Update some interfaces in contrib for new zlib functions
@@ -407,7 +893,7 @@ Changes in 1.0.7 (20 Jan 1998)
 Changes in 1.0.6 (19 Jan 1998)
 - add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
   gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
-- Fix a deflate bug occuring only with compression level 0 (thanks to
+- Fix a deflate bug occurring only with compression level 0 (thanks to
   Andy Buckler for finding this one).
 - In minigzip, pass transparently also the first byte for .Z files.
 - return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()

FAQ

@@ -3,8 +3,8 @@
 
 
 If your question is not there, please check the zlib home page
-http://www.zlib.org which may have more recent information.
+http://zlib.net/ which may have more recent information.
-The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
+The lastest zlib FAQ is at http://zlib.net/zlib_faq.html
 
 
  1. Is zlib Y2K-compliant?
@@ -13,54 +13,51 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
 
  2. Where can I get a Windows DLL version?
 
-    The zlib sources can be compiled without change to produce a DLL.
+    The zlib sources can be compiled without change to produce a DLL.  See the
-    See the file win32/DLL_FAQ.txt in the zlib distribution.
+    file win32/DLL_FAQ.txt in the zlib distribution.  Pointers to the
-    Pointers to the precompiled DLL are found in the zlib web site at
+    precompiled DLL are found in the zlib web site at http://zlib.net/ .
-    http://www.zlib.org.
 
  3. Where can I get a Visual Basic interface to zlib?
 
     See
-        * http://www.winimage.com/zLibDll/
+        * http://marknelson.us/1997/01/01/zlib-engine/
-        * http://www.dogma.net/markn/articles/zlibtool/zlibtool.htm
+        * win32/DLL_FAQ.txt in the zlib distribution
-        * contrib/visual-basic.txt in the zlib distribution
 
- 4. compress() returns Z_BUF_ERROR
+ 4. compress() returns Z_BUF_ERROR.
 
-    Make sure that before the call of compress, the length of the compressed
+    Make sure that before the call of compress(), the length of the compressed
-    buffer is equal to the total size of the compressed buffer and not
+    buffer is equal to the available size of the compressed buffer and not
-    zero. For Visual Basic, check that this parameter is passed by reference
+    zero.  For Visual Basic, check that this parameter is passed by reference
     ("as any"), not by value ("as long").
 
- 5. deflate() or inflate() returns Z_BUF_ERROR
+ 5. deflate() or inflate() returns Z_BUF_ERROR.
 
-    Before making the call, make sure that avail_in and avail_out are not
+    Before making the call, make sure that avail_in and avail_out are not zero.
-    zero. When setting the parameter flush equal to Z_FINISH, also make sure
+    When setting the parameter flush equal to Z_FINISH, also make sure that
-    that avail_out is big enough to allow processing all pending input.
+    avail_out is big enough to allow processing all pending input.  Note that a
-    Note that a Z_BUF_ERROR is not fatal--another call to deflate() or
+    Z_BUF_ERROR is not fatal--another call to deflate() or inflate() can be
-    inflate() can be made with more input or output space. A Z_BUF_ERROR
+    made with more input or output space.  A Z_BUF_ERROR may in fact be
-    may in fact be unavoidable depending on how the functions are used, since
+    unavoidable depending on how the functions are used, since it is not
-    it is not possible to tell whether or not there is more output pending
+    possible to tell whether or not there is more output pending when
-    when strm.avail_out returns with zero.
+    strm.avail_out returns with zero.  See http://zlib.net/zlib_how.html for a
+    heavily annotated example.
 
  6. Where's the zlib documentation (man pages, etc.)?
 
-    It's in zlib.h for the moment, and Francis S. Lin has converted it to a
+    It's in zlib.h .  Examples of zlib usage are in the files example.c and
-    web page zlib.html. Volunteers to transform this to Unix-style man pages,
+    minigzip.c, with more in examples/ .
-    please contact Jean-loup Gailly (jloup@gzip.org). Examples of zlib usage
-    are in the files example.c and minigzip.c.
 
  7. Why don't you use GNU autoconf or libtool or ...?
 
-    Because we would like to keep zlib as a very small and simple
+    Because we would like to keep zlib as a very small and simple package.
-    package. zlib is rather portable and doesn't need much configuration.
+    zlib is rather portable and doesn't need much configuration.
 
  8. I found a bug in zlib.
 
-    Most of the time, such problems are due to an incorrect usage of
+    Most of the time, such problems are due to an incorrect usage of zlib.
-    zlib. Please try to reproduce the problem with a small program and send
+    Please try to reproduce the problem with a small program and send the
-    the corresponding source to us at zlib@gzip.org . Do not send
+    corresponding source to us at zlib@gzip.org .  Do not send multi-megabyte
-    multi-megabyte data files without prior agreement.
+    data files without prior agreement.
 
  9. Why do I get "undefined reference to gzputc"?
 
@@ -77,11 +74,12 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
 
 11. Can zlib handle .zip archives?
 
-    See the directory contrib/minizip in the zlib distribution.
+    Not by itself, no.  See the directory contrib/minizip in the zlib
+    distribution.
 
 12. Can zlib handle .Z files?
 
-    No, sorry. You have to spawn an uncompress or gunzip subprocess, or adapt
+    No, sorry.  You have to spawn an uncompress or gunzip subprocess, or adapt
     the code of uncompress on your own.
 
 13. How can I make a Unix shared library?
@@ -92,81 +90,97 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
 
 14. How do I install a shared zlib library on Unix?
 
+    After the above, then:
+
     make install
 
     However, many flavors of Unix come with a shared zlib already installed.
     Before going to the trouble of compiling a shared version of zlib and
-    trying to install it, you may want to check if it's already there! If you
+    trying to install it, you may want to check if it's already there!  If you
-    can #include <zlib.h>, it's there. The -lz option will probably link to it.
+    can #include <zlib.h>, it's there.  The -lz option will probably link to
+    it.  You can check the version at the top of zlib.h or with the
+    ZLIB_VERSION symbol defined in zlib.h .
 
-15. I have a question about OttoPDF
+15. I have a question about OttoPDF.
 
     We are not the authors of OttoPDF. The real author is on the OttoPDF web
-    site Joel Hainley jhainley@myndkryme.com.
+    site: Joel Hainley, jhainley@myndkryme.com.
 
-16. Why does gzip give an error on a file I make with compress/deflate?
+16. Can zlib decode Flate data in an Adobe PDF file?
+
+    Yes. See http://www.pdflib.com/ . To modify PDF forms, see
+    http://sourceforge.net/projects/acroformtool/ .
+
+17. Why am I getting this "register_frame_info not found" error on Solaris?
+
+    After installing zlib 1.1.4 on Solaris 2.6, running applications using zlib
+    generates an error such as:
+
+        ld.so.1: rpm: fatal: relocation error: file /usr/local/lib/libz.so:
+        symbol __register_frame_info: referenced symbol not found
+
+    The symbol __register_frame_info is not part of zlib, it is generated by
+    the C compiler (cc or gcc).  You must recompile applications using zlib
+    which have this problem.  This problem is specific to Solaris.  See
+    http://www.sunfreeware.com for Solaris versions of zlib and applications
+    using zlib.
+
+18. Why does gzip give an error on a file I make with compress/deflate?
 
     The compress and deflate functions produce data in the zlib format, which
-    is different and incompatible with the gzip format. The gz* functions in
+    is different and incompatible with the gzip format.  The gz* functions in
-    zlib on the other hand use the gzip format. Both the zlib and gzip
+    zlib on the other hand use the gzip format.  Both the zlib and gzip formats
-    formats use the same compressed data format internally, but have different
+    use the same compressed data format internally, but have different headers
-    headers and trailers around the compressed data.
+    and trailers around the compressed data.
 
-17. Ok, so why are there two different formats?
+19. Ok, so why are there two different formats?
 
-    The gzip format was designed to retain the directory information about
+    The gzip format was designed to retain the directory information about a
-    a single file, such as the name and last modification date. The zlib
+    single file, such as the name and last modification date.  The zlib format
-    format on the other hand was designed for in-memory and communication
+    on the other hand was designed for in-memory and communication channel
-    channel applications, and has a much more compact header and trailer and
+    applications, and has a much more compact header and trailer and uses a
-    uses a faster integrity check than gzip.
+    faster integrity check than gzip.
 
-18. Well that's nice, but how do I make a gzip file in memory?
+20. Well that's nice, but how do I make a gzip file in memory?
 
     You can request that deflate write the gzip format instead of the zlib
-    format using deflateInit2(). You can also request that inflate decode
+    format using deflateInit2().  You can also request that inflate decode the
-    the gzip format using inflateInit2(). Read zlib.h for more details.
+    gzip format using inflateInit2().  Read zlib.h for more details.
 
-    Note that you cannot specify special gzip header contents (e.g. a file
+21. Is zlib thread-safe?
-    name or modification date), nor will inflate tell you what was in the
-    gzip header. If you need to customize the header or see what's in it,
-    you can use the raw deflate and inflate operations and the crc32()
-    function and roll your own gzip encoding and decoding. Read the gzip
-    RFC 1952 for details of the header and trailer format.
 
-19. Is zlib thread-safe?
+    Yes.  However any library routines that zlib uses and any application-
-
+    provided memory allocation routines must also be thread-safe.  zlib's gz*
-    Yes. However any library routines that zlib uses and any application-
-    provided memory allocation routines must also be thread-safe. zlib's gz*
     functions use stdio library routines, and most of zlib's functions use the
-    library memory allocation routines by default. zlib's Init functions allow
+    library memory allocation routines by default.  zlib's *Init* functions
-    for the application to provide custom memory allocation routines.
+    allow for the application to provide custom memory allocation routines.
 
     Of course, you should only operate on any given zlib or gzip stream from a
     single thread at a time.
 
-20. Can I use zlib in my commercial application?
+22. Can I use zlib in my commercial application?
 
-    Yes. Please read the license in zlib.h.
+    Yes.  Please read the license in zlib.h.
 
-21. Is zlib under the GNU license?
+23. Is zlib under the GNU license?
 
-    No. Please read the license in zlib.h.
+    No.  Please read the license in zlib.h.
 
-22. The license says that altered source versions must be "plainly marked". So
+24. The license says that altered source versions must be "plainly marked". So
     what exactly do I need to do to meet that requirement?
 
-    You need to change the ZLIB_VERSION and ZLIB_VERNUM #defines in zlib.h. In
+    You need to change the ZLIB_VERSION and ZLIB_VERNUM #defines in zlib.h.  In
     particular, the final version number needs to be changed to "f", and an
-    identification string should be appended to ZLIB_VERSION. Version numbers
+    identification string should be appended to ZLIB_VERSION.  Version numbers
     x.x.x.f are reserved for modifications to zlib by others than the zlib
-    maintainers. For example, if the version of the base zlib you are altering
+    maintainers.  For example, if the version of the base zlib you are altering
     is "1.2.3.4", then in zlib.h you should change ZLIB_VERNUM to 0x123f, and
-    ZLIB_VERSION to something like "1.2.3.f-zachary-mods-v3". You can also
+    ZLIB_VERSION to something like "1.2.3.f-zachary-mods-v3".  You can also
     update the version strings in deflate.c and inftrees.c.
 
     For altered source distributions, you should also note the origin and
     nature of the changes in zlib.h, as well as in ChangeLog and README, along
-    with the dates of the alterations. The origin should include at least your
+    with the dates of the alterations.  The origin should include at least your
     name (or your company's name), and an email address to contact for help or
     issues with the library.
 
@@ -175,126 +189,143 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
     ZLIB_VERSION and ZLIB_VERNUM and note the origin and nature of the changes
     in zlib.h as you would for a full source distribution.
 
-23. Will zlib work on a big-endian or little-endian architecture, and can I
+25. Will zlib work on a big-endian or little-endian architecture, and can I
     exchange compressed data between them?
 
     Yes and yes.
 
-24. Will zlib work on a 64-bit machine?
+26. Will zlib work on a 64-bit machine?
 
-    It should. It has been tested on 64-bit machines, and has no dependence
+    Yes.  It has been tested on 64-bit machines, and has no dependence on any
-    on any data types being limited to 32-bits in length. If you have any
+    data types being limited to 32-bits in length.  If you have any
     difficulties, please provide a complete problem report to zlib@gzip.org
 
-25. Will zlib decompress data from the PKWare Data Compression Library?
+27. Will zlib decompress data from the PKWare Data Compression Library?
 
-    No. The PKWare DCL uses a completely different compressed data format
+    No.  The PKWare DCL uses a completely different compressed data format than
-    than does PKZIP and zlib. However, you can look in zlib's contrib/blast
+    does PKZIP and zlib.  However, you can look in zlib's contrib/blast
     directory for a possible solution to your problem.
 
-26. Can I access data randomly in a compressed stream?
+28. Can I access data randomly in a compressed stream?
 
-    No, not without some preparation. If when compressing you periodically
+    No, not without some preparation.  If when compressing you periodically use
-    use Z_FULL_FLUSH, carefully write all the pending data at those points,
+    Z_FULL_FLUSH, carefully write all the pending data at those points, and
-    and keep an index of those locations, then you can start decompression
+    keep an index of those locations, then you can start decompression at those
-    at those points. You have to be careful to not use Z_FULL_FLUSH too
+    points.  You have to be careful to not use Z_FULL_FLUSH too often, since it
-    often, since it can significantly degrade compression.
+    can significantly degrade compression.  Alternatively, you can scan a
+    deflate stream once to generate an index, and then use that index for
+    random access.  See examples/zran.c .
 
-27. Does zlib work on MVS, OS/390, CICS, etc.?
+29. Does zlib work on MVS, OS/390, CICS, etc.?
 
-    We don't know for sure. We have heard occasional reports of success on
+    It has in the past, but we have not heard of any recent evidence.  There
-    these systems. If you do use it on one of these, please provide us with
+    were working ports of zlib 1.1.4 to MVS, but those links no longer work.
-    a report, instructions, and patches that we can reference when we get
+    If you know of recent, successful applications of zlib on these operating
-    these questions. Thanks.
+    systems, please let us know.  Thanks.
 
-28. Is there some simpler, easier to read version of inflate I can look at
+30. Is there some simpler, easier to read version of inflate I can look at to
-    to understand the deflate format?
+    understand the deflate format?
 
-    First off, you should read RFC 1951. Second, yes. Look in zlib's
+    First off, you should read RFC 1951.  Second, yes.  Look in zlib's
     contrib/puff directory.
 
-29. Does zlib infringe on any patents?
+31. Does zlib infringe on any patents?
 
-    As far as we know, no. In fact, that was originally the whole point behind
+    As far as we know, no.  In fact, that was originally the whole point behind
-    zlib. Look here for some more information:
+    zlib.  Look here for some more information:
 
     http://www.gzip.org/#faq11
 
-30. Can zlib work with greater than 4 GB of data?
+32. Can zlib work with greater than 4 GB of data?
 
-    Yes. inflate() and deflate() will process any amount of data correctly.
+    Yes.  inflate() and deflate() will process any amount of data correctly.
     Each call of inflate() or deflate() is limited to input and output chunks
     of the maximum value that can be stored in the compiler's "unsigned int"
-    type, but there is no limit to the number of chunks. Note however that the
+    type, but there is no limit to the number of chunks.  Note however that the
-    strm.total_in and strm_total_out counters may be limited to 4 GB. These
+    strm.total_in and strm_total_out counters may be limited to 4 GB.  These
     counters are provided as a convenience and are not used internally by
-    inflate() or deflate(). The application can easily set up its own counters
+    inflate() or deflate().  The application can easily set up its own counters
     updated after each call of inflate() or deflate() to count beyond 4 GB.
     compress() and uncompress() may be limited to 4 GB, since they operate in a
-    single call. gzseek() and gztell() may be limited to 4 GB depending on how
+    single call.  gzseek() and gztell() may be limited to 4 GB depending on how
-    zlib is compiled. See the zlibCompileFlags() function in zlib.h.
+    zlib is compiled.  See the zlibCompileFlags() function in zlib.h.
 
-    The word "may" appears several times above since there is a 4 GB limit
+    The word "may" appears several times above since there is a 4 GB limit only
-    only if the compiler's "long" type is 32 bits. If the compiler's "long"
+    if the compiler's "long" type is 32 bits.  If the compiler's "long" type is
-    type is 64 bits, then the limit is 16 exabytes.
+    64 bits, then the limit is 16 exabytes.
 
-31. Does zlib have any security vulnerabilities?
+33. Does zlib have any security vulnerabilities?
 
-    The only one that we are aware of is potentially in gzprintf(). If zlib
+    The only one that we are aware of is potentially in gzprintf().  If zlib is
-    is compiled to use sprintf() or vsprintf(), then there is no protection
+    compiled to use sprintf() or vsprintf(), then there is no protection
-    against a buffer overflow of a 4K string space, other than the caller of
+    against a buffer overflow of an 8K string space (or other value as set by
-    gzprintf() assuring that the output will not exceed 4K. On the other
+    gzbuffer()), other than the caller of gzprintf() assuring that the output
-    hand, if zlib is compiled to use snprintf() or vsnprintf(), which should
+    will not exceed 8K.  On the other hand, if zlib is compiled to use
-    normally be the case, then there is no vulnerability. The ./configure
+    snprintf() or vsnprintf(), which should normally be the case, then there is
-    script will display warnings if an insecure variation of sprintf() will
+    no vulnerability.  The ./configure script will display warnings if an
-    be used by gzprintf(). Also the zlibCompileFlags() function will return
+    insecure variation of sprintf() will be used by gzprintf().  Also the
-    information on what variant of sprintf() is used by gzprintf().
+    zlibCompileFlags() function will return information on what variant of
+    sprintf() is used by gzprintf().
 
     If you don't have snprintf() or vsnprintf() and would like one, you can
     find a portable implementation here:
 
         http://www.ijs.si/software/snprintf/
 
-    Note that you should be using the most recent version of zlib. Versions
+    Note that you should be using the most recent version of zlib.  Versions
-    1.1.3 and before were subject to a double-free vulnerability.
+    1.1.3 and before were subject to a double-free vulnerability, and versions
+    1.2.1 and 1.2.2 were subject to an access exception when decompressing
+    invalid compressed data.
 
-32. Is there a Java version of zlib?
+34. Is there a Java version of zlib?
 
     Probably what you want is to use zlib in Java. zlib is already included
     as part of the Java SDK in the java.util.zip package. If you really want
     a version of zlib written in the Java language, look on the zlib home
-    page for links: http://www.zlib.org/
+    page for links: http://zlib.net/ .
 
-33. I get this or that compiler or source-code scanner warning when I crank it
+35. I get this or that compiler or source-code scanner warning when I crank it
-    up to maximally-pendantic. Can't you guys write proper code?
+    up to maximally-pedantic. Can't you guys write proper code?
 
     Many years ago, we gave up attempting to avoid warnings on every compiler
-    in the universe. It just got to be a waste of time, and some compilers
+    in the universe.  It just got to be a waste of time, and some compilers
-    were downright silly. So now, we simply make sure that the code always
+    were downright silly as well as contradicted each other.  So now, we simply
-    works.
+    make sure that the code always works.
 
-34. Will zlib read the (insert any ancient or arcane format here) compressed
+36. Valgrind (or some similar memory access checker) says that deflate is
+    performing a conditional jump that depends on an uninitialized value.
+    Isn't that a bug?
+
+    No.  That is intentional for performance reasons, and the output of deflate
+    is not affected.  This only started showing up recently since zlib 1.2.x
+    uses malloc() by default for allocations, whereas earlier versions used
+    calloc(), which zeros out the allocated memory.  Even though the code was
+    correct, versions 1.2.4 and later was changed to not stimulate these
+    checkers.
+
+37. Will zlib read the (insert any ancient or arcane format here) compressed
     data format?
 
     Probably not. Look in the comp.compression FAQ for pointers to various
     formats and associated software.
 
-35. How can I encrypt/decrypt zip files with zlib?
+38. How can I encrypt/decrypt zip files with zlib?
 
-    zlib doesn't support encryption. The original PKZIP encryption is very weak
+    zlib doesn't support encryption.  The original PKZIP encryption is very
-    and can be broken with freely available programs. To get strong encryption,
+    weak and can be broken with freely available programs.  To get strong
-    use gpg ( http://www.gnupg.org/ ) which already includes zlib compression.
+    encryption, use GnuPG, http://www.gnupg.org/ , which already includes zlib
-    For PKZIP compatible "encryption", look at http://www.info-zip.org/
+    compression.  For PKZIP compatible "encryption", look at
+    http://www.info-zip.org/
 
-36. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings?
+39. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings?
 
-    "gzip" is the gzip format, and "deflate" is the zlib format. They should
+    "gzip" is the gzip format, and "deflate" is the zlib format.  They should
-    probably have called the second one "zlib" instead to avoid confusion
+    probably have called the second one "zlib" instead to avoid confusion with
-    with the raw deflate compressed data format. While the HTTP 1.1 RFC 2616
+    the raw deflate compressed data format.  While the HTTP 1.1 RFC 2616
     correctly points to the zlib specification in RFC 1950 for the "deflate"
     transfer encoding, there have been reports of servers and browsers that
     incorrectly produce or expect raw deflate data per the deflate
-    specficiation in RFC 1951, most notably Microsoft. So even though the
+    specficiation in RFC 1951, most notably Microsoft.  So even though the
     "deflate" transfer encoding using the zlib format would be the more
     efficient approach (and in fact exactly what the zlib format was designed
     for), using the "gzip" transfer encoding is probably more reliable due to
@@ -302,14 +333,34 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
 
     Bottom line: use the gzip format for HTTP 1.1 encoding.
 
-37. Does zlib support the new "Deflate64" format introduced by PKWare?
+40. Does zlib support the new "Deflate64" format introduced by PKWare?
 
-    No. PKWare has apparently decided to keep that format proprietary, since
+    No.  PKWare has apparently decided to keep that format proprietary, since
-    they have not documented it as they have previous compression formats.
+    they have not documented it as they have previous compression formats.  In
-    In any case, the compression improvements are so modest compared to other
+    any case, the compression improvements are so modest compared to other more
-    more modern approaches, that it's not worth the effort to implement.
+    modern approaches, that it's not worth the effort to implement.
 
-38. Can you please sign these lengthy legal documents and fax them back to us
+41. I'm having a problem with the zip functions in zlib, can you help?
+
+    There are no zip functions in zlib.  You are probably using minizip by
+    Giles Vollant, which is found in the contrib directory of zlib.  It is not
+    part of zlib.  In fact none of the stuff in contrib is part of zlib.  The
+    files in there are not supported by the zlib authors.  You need to contact
+    the authors of the respective contribution for help.
+
+42. The match.asm code in contrib is under the GNU General Public License.
+    Since it's part of zlib, doesn't that mean that all of zlib falls under the
+    GNU GPL?
+
+    No.  The files in contrib are not part of zlib.  They were contributed by
+    other authors and are provided as a convenience to the user within the zlib
+    distribution.  Each item in contrib has its own license.
+
+43. Is zlib subject to export controls?  What is its ECCN?
+
+    zlib is not subject to export controls, and so is classified as EAR99.
+
+44. Can you please sign these lengthy legal documents and fax them back to us
     so that we can use your software in our product?
 
     No. Go away. Shoo.

INDEX

@@ -1,20 +1,32 @@
+CMakeLists.txt  cmake build file
 ChangeLog       history of changes
 FAQ             Frequently Asked Questions about zlib
 INDEX           this file
-Makefile        makefile for Unix (generated by configure)
+Makefile        dummy Makefile that tells you to ./configure
-Makefile.in     makefile for Unix (template for configure)
+Makefile.in     template for Unix Makefile
 README          guess what
-algorithm.txt   description of the (de)compression algorithm
 configure       configure script for Unix
-zconf.in.h      template for zconf.h (used by configure)
+make_vms.com    makefile for VMS
+treebuild.xml   XML description of source file dependencies
+zconf.h.cmakein zconf.h template for cmake
+zconf.h.in      zconf.h template for configure
+zlib.3          Man page for zlib
+zlib.3.pdf      Man page in PDF format
+zlib.map        Linux symbol information
+zlib.pc.in      Template for pkg-config descriptor
+zlib2ansi       perl script to convert source files for C++ compilation
 
+amiga/          makefiles for Amiga SAS C
+doc/            documentation for formats and algorithms
 msdos/          makefiles for MSDOS
+nintendods/     makefile for Nintendo DS
 old/            makefiles for various architectures and zlib documentation
                 files that have not yet been updated for zlib 1.2.x
 qnx/            makefiles for QNX
+watcom/         makefiles for OpenWatcom
 win32/          makefiles for Windows
 
-                zlib public header files (must be kept):
+                zlib public header files (required for library use):
 zconf.h
 zlib.h
 
@@ -25,7 +37,11 @@ crc32.c
 crc32.h
 deflate.c
 deflate.h
-gzio.c
+gzclose.c
+gzguts.h
+gzlib.c
+gzread.c
+gzwrite.c
 infback.c
 inffast.c
 inffast.h
@@ -43,6 +59,7 @@ zutil.h
                 source files for sample programs:
 example.c
 minigzip.c
+See examples/README.examples for more
 
                 unsupported contribution by third parties
 See contrib/README.contrib

Makefile

@@ -1,154 +1,5 @@
-# Makefile for zlib
+all:
-# Copyright (C) 1995-2003 Jean-loup Gailly.
+	-@echo "Please use ./configure first.  Thank you."
-# For conditions of distribution and use, see copyright notice in zlib.h
 
-# To compile and test, type:
+distclean:
-#    ./configure; make test
+	make -f Makefile.in distclean
-# The call of configure is optional if you don't have special requirements
-# If you wish to build zlib as a shared library, use: ./configure -s
-
-# To use the asm code, type:
-#    cp contrib/asm?86/match.S ./match.S
-#    make LOC=-DASMV OBJA=match.o
-
-# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
-#    make install
-# To install in $HOME instead of /usr/local, use:
-#    make install prefix=$HOME
-
-CC=cc
-
-CFLAGS=-O
-#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
-#CFLAGS=-g -DDEBUG
-#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
-#           -Wstrict-prototypes -Wmissing-prototypes
-
-LDFLAGS=libz.a
-LDSHARED=$(CC)
-CPP=$(CC) -E
-
-LIBS=libz.a
-SHAREDLIB=libz.so
-SHAREDLIBV=libz.so.1.2.1
-SHAREDLIBM=libz.so.1
-
-AR=ar rc
-RANLIB=ranlib
-TAR=tar
-SHELL=/bin/sh
-EXE=
-
-prefix = /usr/local
-exec_prefix = ${prefix}
-libdir = ${exec_prefix}/lib
-includedir = ${prefix}/include
-mandir = ${prefix}/share/man
-man3dir = ${mandir}/man3
-
-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
-       zutil.o inflate.o infback.o inftrees.o inffast.o
-
-OBJA =
-# to use the asm code: make OBJA=match.o
-
-TEST_OBJS = example.o minigzip.o
-
-all: example$(EXE) minigzip$(EXE)
-
-check: test
-test: all
-	@LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
-	echo hello world | ./minigzip | ./minigzip -d || \
-	  echo '		*** minigzip test FAILED ***' ; \
-	if ./example; then \
-	  echo '		*** zlib test OK ***'; \
-	else \
-	  echo '		*** zlib test FAILED ***'; \
-	fi
-
-libz.a: $(OBJS) $(OBJA)
-	$(AR) $@ $(OBJS) $(OBJA)
-	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
-
-match.o: match.S
-	$(CPP) match.S > _match.s
-	$(CC) -c _match.s
-	mv _match.o match.o
-	rm -f _match.s
-
-$(SHAREDLIBV): $(OBJS)
-	$(LDSHARED) -o $@ $(OBJS)
-	rm -f $(SHAREDLIB) $(SHAREDLIBM)
-	ln -s $@ $(SHAREDLIB)
-	ln -s $@ $(SHAREDLIBM)
-
-example$(EXE): example.o $(LIBS)
-	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
-
-minigzip$(EXE): minigzip.o $(LIBS)
-	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
-
-install: $(LIBS)
-	-@if [ ! -d $(exec_prefix) ]; then mkdir -p $(exec_prefix); fi
-	-@if [ ! -d $(includedir)  ]; then mkdir -p $(includedir); fi
-	-@if [ ! -d $(libdir)      ]; then mkdir -p $(libdir); fi
-	-@if [ ! -d $(man3dir)     ]; then mkdir -p $(man3dir); fi
-	cp zlib.h zconf.h $(includedir)
-	chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h
-	cp $(LIBS) $(libdir)
-	cd $(libdir); chmod 755 $(LIBS)
-	-@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
-	cd $(libdir); if test -f $(SHAREDLIBV); then \
-	  rm -f $(SHAREDLIB) $(SHAREDLIBM); \
-	  ln -s $(SHAREDLIBV) $(SHAREDLIB); \
-	  ln -s $(SHAREDLIBV) $(SHAREDLIBM); \
-	  (ldconfig || true)  >/dev/null 2>&1; \
-	fi
-	cp zlib.3 $(man3dir)
-	chmod 644 $(man3dir)/zlib.3
-# The ranlib in install is needed on NeXTSTEP which checks file times
-# ldconfig is for Linux
-
-uninstall:
-	cd $(includedir); \
-	cd $(libdir); rm -f libz.a; \
-	if test -f $(SHAREDLIBV); then \
-	  rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \
-	fi
-	cd $(man3dir); rm -f zlib.3
-
-mostlyclean: clean
-clean:
-	rm -f *.o *~ example$(EXE) minigzip$(EXE) \
-	   libz.* foo.gz so_locations \
-	   _match.s maketree contrib/infback9/*.o
-
-maintainer-clean: distclean
-distclean: clean
-	cp -p Makefile.in Makefile
-	cp -p zconf.in.h zconf.h
-	rm -f .DS_Store
-
-tags:
-	etags *.[ch]
-
-depend:
-	makedepend -- $(CFLAGS) -- *.[ch]
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-adler32.o: zlib.h zconf.h
-compress.o: zlib.h zconf.h
-crc32.o: crc32.h zlib.h zconf.h
-deflate.o: deflate.h zutil.h zlib.h zconf.h
-example.o: zlib.h zconf.h
-gzio.o: zutil.h zlib.h zconf.h
-inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
-inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
-infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
-inftrees.o: zutil.h zlib.h zconf.h inftrees.h
-minigzip.o: zlib.h zconf.h
-trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
-uncompr.o: zlib.h zconf.h
-zutil.o: zutil.h zlib.h zconf.h

Makefile.in

@@ -1,11 +1,11 @@
 # Makefile for zlib
-# Copyright (C) 1995-2003 Jean-loup Gailly.
+# Copyright (C) 1995-2010 Jean-loup Gailly.
 # For conditions of distribution and use, see copyright notice in zlib.h
 
 # To compile and test, type:
 #    ./configure; make test
-# The call of configure is optional if you don't have special requirements
+# Normally configure builds both a static and a shared library.
-# If you wish to build zlib as a shared library, use: ./configure -s
+# If you want to build just a static library, use: ./configure --static
 
 # To use the asm code, type:
 #    cp contrib/asm?86/match.S ./match.S
@@ -24,17 +24,22 @@ CFLAGS=-O
 #CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
 #           -Wstrict-prototypes -Wmissing-prototypes
 
-LDFLAGS=libz.a
+SFLAGS=-O
+LDFLAGS=
+TEST_LDFLAGS=-L. libz.a
 LDSHARED=$(CC)
 CPP=$(CC) -E
 
-LIBS=libz.a
+STATICLIB=libz.a
 SHAREDLIB=libz.so
-SHAREDLIBV=libz.so.1.2.1
+SHAREDLIBV=libz.so.1.2.5
 SHAREDLIBM=libz.so.1
+LIBS=$(STATICLIB) $(SHAREDLIBV)
 
 AR=ar rc
 RANLIB=ranlib
+LDCONFIG=ldconfig
+LDSHAREDLIBC=-lc
 TAR=tar
 SHELL=/bin/sh
 EXE=
@@ -42,33 +47,68 @@ EXE=
 prefix = /usr/local
 exec_prefix = ${prefix}
 libdir = ${exec_prefix}/lib
+sharedlibdir = ${libdir}
 includedir = ${prefix}/include
 mandir = ${prefix}/share/man
 man3dir = ${mandir}/man3
+pkgconfigdir = ${libdir}/pkgconfig
 
-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+OBJC = adler32.o compress.o crc32.o deflate.o gzclose.o gzlib.o gzread.o \
-       zutil.o inflate.o infback.o inftrees.o inffast.o
+	gzwrite.o infback.o inffast.o inflate.o inftrees.o trees.o uncompr.o zutil.o
 
+PIC_OBJC = adler32.lo compress.lo crc32.lo deflate.lo gzclose.lo gzlib.lo gzread.lo \
+	gzwrite.lo infback.lo inffast.lo inflate.lo inftrees.lo trees.lo uncompr.lo zutil.lo
+
+# to use the asm code: make OBJA=match.o, PIC_OBJA=match.lo
 OBJA =
-# to use the asm code: make OBJA=match.o
+PIC_OBJA =
 
-TEST_OBJS = example.o minigzip.o
+OBJS = $(OBJC) $(OBJA)
 
-all: example$(EXE) minigzip$(EXE)
+PIC_OBJS = $(PIC_OBJC) $(PIC_OBJA)
+
+all: static shared
+
+static: example$(EXE) minigzip$(EXE)
+
+shared: examplesh$(EXE) minigzipsh$(EXE)
+
+all64: example64$(EXE) minigzip64$(EXE)
 
 check: test
-test: all
+
-	@LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
+test: all teststatic testshared
-	echo hello world | ./minigzip | ./minigzip -d || \
+
-	  echo '		*** minigzip test FAILED ***' ; \
+teststatic: static
-	if ./example; then \
+	@if echo hello world | ./minigzip | ./minigzip -d && ./example; then \
 	  echo '		*** zlib test OK ***'; \
 	else \
-	  echo '		*** zlib test FAILED ***'; \
+	  echo '		*** zlib test FAILED ***'; false; \
 	fi
+	-@rm -f foo.gz
 
-libz.a: $(OBJS) $(OBJA)
+testshared: shared
-	$(AR) $@ $(OBJS) $(OBJA)
+	@LD_LIBRARY_PATH=`pwd`:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
+	LD_LIBRARYN32_PATH=`pwd`:$(LD_LIBRARYN32_PATH) ; export LD_LIBRARYN32_PATH; \
+	DYLD_LIBRARY_PATH=`pwd`:$(DYLD_LIBRARY_PATH) ; export DYLD_LIBRARY_PATH; \
+	SHLIB_PATH=`pwd`:$(SHLIB_PATH) ; export SHLIB_PATH; \
+	if echo hello world | ./minigzipsh | ./minigzipsh -d && ./examplesh; then \
+	  echo '		*** zlib shared test OK ***'; \
+	else \
+	  echo '		*** zlib shared test FAILED ***'; false; \
+	fi
+	-@rm -f foo.gz
+
+test64: all64
+	@if echo hello world | ./minigzip64 | ./minigzip64 -d && ./example64; then \
+	  echo '		*** zlib 64-bit test OK ***'; \
+	else \
+	  echo '		*** zlib 64-bit test FAILED ***'; false; \
+	fi
+	-@rm -f foo.gz
+
+libz.a: $(OBJS)
+	$(AR) $@ $(OBJS)
 	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
 
 match.o: match.S
@@ -77,58 +117,116 @@ match.o: match.S
 	mv _match.o match.o
 	rm -f _match.s
 
-$(SHAREDLIBV): $(OBJS)
+match.lo: match.S
-	$(LDSHARED) -o $@ $(OBJS)
+	$(CPP) match.S > _match.s
+	$(CC) -c -fPIC _match.s
+	mv _match.o match.lo
+	rm -f _match.s
+
+example64.o: example.c zlib.h zconf.h
+	$(CC) $(CFLAGS) -D_FILE_OFFSET_BITS=64 -c -o $@ example.c
+
+minigzip64.o: minigzip.c zlib.h zconf.h
+	$(CC) $(CFLAGS) -D_FILE_OFFSET_BITS=64 -c -o $@ minigzip.c
+
+.SUFFIXES: .lo
+
+.c.lo:
+	-@mkdir objs 2>/dev/null || test -d objs
+	$(CC) $(SFLAGS) -DPIC -c -o objs/$*.o $<
+	-@mv objs/$*.o $@
+
+$(SHAREDLIBV): $(PIC_OBJS)
+	$(LDSHARED) $(SFLAGS) -o $@ $(PIC_OBJS) $(LDSHAREDLIBC) $(LDFLAGS)
 	rm -f $(SHAREDLIB) $(SHAREDLIBM)
 	ln -s $@ $(SHAREDLIB)
 	ln -s $@ $(SHAREDLIBM)
+	-@rmdir objs
 
-example$(EXE): example.o $(LIBS)
+example$(EXE): example.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
+	$(CC) $(CFLAGS) -o $@ example.o $(TEST_LDFLAGS)
 
-minigzip$(EXE): minigzip.o $(LIBS)
+minigzip$(EXE): minigzip.o $(STATICLIB)
-	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
+	$(CC) $(CFLAGS) -o $@ minigzip.o $(TEST_LDFLAGS)
 
-install: $(LIBS)
+examplesh$(EXE): example.o $(SHAREDLIBV)
-	-@if [ ! -d $(exec_prefix) ]; then mkdir -p $(exec_prefix); fi
+	$(CC) $(CFLAGS) -o $@ example.o -L. $(SHAREDLIBV)
-	-@if [ ! -d $(includedir)  ]; then mkdir -p $(includedir); fi
+
-	-@if [ ! -d $(libdir)      ]; then mkdir -p $(libdir); fi
+minigzipsh$(EXE): minigzip.o $(SHAREDLIBV)
-	-@if [ ! -d $(man3dir)     ]; then mkdir -p $(man3dir); fi
+	$(CC) $(CFLAGS) -o $@ minigzip.o -L. $(SHAREDLIBV)
-	cp zlib.h zconf.h $(includedir)
+
-	chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h
+example64$(EXE): example64.o $(STATICLIB)
-	cp $(LIBS) $(libdir)
+	$(CC) $(CFLAGS) -o $@ example64.o $(TEST_LDFLAGS)
-	cd $(libdir); chmod 755 $(LIBS)
+
-	-@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
+minigzip64$(EXE): minigzip64.o $(STATICLIB)
-	cd $(libdir); if test -f $(SHAREDLIBV); then \
+	$(CC) $(CFLAGS) -o $@ minigzip64.o $(TEST_LDFLAGS)
+
+install-libs: $(LIBS)
+	-@if [ ! -d $(DESTDIR)$(exec_prefix)  ]; then mkdir -p $(DESTDIR)$(exec_prefix); fi
+	-@if [ ! -d $(DESTDIR)$(libdir)       ]; then mkdir -p $(DESTDIR)$(libdir); fi
+	-@if [ ! -d $(DESTDIR)$(sharedlibdir) ]; then mkdir -p $(DESTDIR)$(sharedlibdir); fi
+	-@if [ ! -d $(DESTDIR)$(man3dir)      ]; then mkdir -p $(DESTDIR)$(man3dir); fi
+	-@if [ ! -d $(DESTDIR)$(pkgconfigdir) ]; then mkdir -p $(DESTDIR)$(pkgconfigdir); fi
+	cp $(STATICLIB) $(DESTDIR)$(libdir)
+	cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)
+	cd $(DESTDIR)$(libdir); chmod u=rw,go=r $(STATICLIB)
+	-@(cd $(DESTDIR)$(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
+	-@cd $(DESTDIR)$(sharedlibdir); if test "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \
+	  chmod 755 $(SHAREDLIBV); \
 	  rm -f $(SHAREDLIB) $(SHAREDLIBM); \
 	  ln -s $(SHAREDLIBV) $(SHAREDLIB); \
 	  ln -s $(SHAREDLIBV) $(SHAREDLIBM); \
-	  (ldconfig || true)  >/dev/null 2>&1; \
+	  ($(LDCONFIG) || true)  >/dev/null 2>&1; \
 	fi
-	cp zlib.3 $(man3dir)
+	cp zlib.3 $(DESTDIR)$(man3dir)
-	chmod 644 $(man3dir)/zlib.3
+	chmod 644 $(DESTDIR)$(man3dir)/zlib.3
+	cp zlib.pc $(DESTDIR)$(pkgconfigdir)
+	chmod 644 $(DESTDIR)$(pkgconfigdir)/zlib.pc
 # The ranlib in install is needed on NeXTSTEP which checks file times
 # ldconfig is for Linux
 
+install: install-libs
+	-@if [ ! -d $(DESTDIR)$(includedir)   ]; then mkdir -p $(DESTDIR)$(includedir); fi
+	cp zlib.h zconf.h $(DESTDIR)$(includedir)
+	chmod 644 $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h
+
 uninstall:
-	cd $(includedir); \
+	cd $(DESTDIR)$(includedir); rm -f zlib.h zconf.h
-	cd $(libdir); rm -f libz.a; \
+	cd $(DESTDIR)$(libdir); rm -f libz.a; \
-	if test -f $(SHAREDLIBV); then \
+	if test "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \
 	  rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \
 	fi
-	cd $(man3dir); rm -f zlib.3
+	cd $(DESTDIR)$(man3dir); rm -f zlib.3
+	cd $(DESTDIR)$(pkgconfigdir); rm -f zlib.pc
+
+docs: zlib.3.pdf
+
+zlib.3.pdf: zlib.3
+	groff -mandoc -f H -T ps zlib.3 | ps2pdf - zlib.3.pdf
+
+zconf.h.in: zconf.h.cmakein
+	sed "/^#cmakedefine/D" < zconf.h.cmakein > zconf.h.in
+	touch -r zconf.h.cmakein zconf.h.in
+
+zconf: zconf.h.in
+	cp -p zconf.h.in zconf.h
 
 mostlyclean: clean
 clean:
-	rm -f *.o *~ example$(EXE) minigzip$(EXE) \
+	rm -f *.o *.lo *~ \
+	   example$(EXE) minigzip$(EXE) examplesh$(EXE) minigzipsh$(EXE) \
+	   example64$(EXE) minigzip64$(EXE) \
 	   libz.* foo.gz so_locations \
 	   _match.s maketree contrib/infback9/*.o
+	rm -rf objs
 
 maintainer-clean: distclean
-distclean: clean
+distclean: clean zconf docs
-	cp -p Makefile.in Makefile
+	rm -f Makefile zlib.pc
-	cp -p zconf.in.h zconf.h
+	-@rm -f .DS_Store
-	rm -f .DS_Store
+	-@printf 'all:\n\t-@echo "Please use ./configure first.  Thank you."\n' > Makefile
+	-@printf '\ndistclean:\n\tmake -f Makefile.in distclean\n' >> Makefile
+	-@touch -r Makefile.in Makefile
 
 tags:
 	etags *.[ch]
@@ -138,17 +236,22 @@ depend:
 
 # DO NOT DELETE THIS LINE -- make depend depends on it.
 
-adler32.o: zlib.h zconf.h
+adler32.o zutil.o: zutil.h zlib.h zconf.h
-compress.o: zlib.h zconf.h
+gzclose.o gzlib.o gzread.o gzwrite.o: zlib.h zconf.h gzguts.h
-crc32.o: crc32.h zlib.h zconf.h
+compress.o example.o minigzip.o uncompr.o: zlib.h zconf.h
+crc32.o: zutil.h zlib.h zconf.h crc32.h
 deflate.o: deflate.h zutil.h zlib.h zconf.h
-example.o: zlib.h zconf.h
+infback.o inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h inffixed.h
-gzio.o: zutil.h zlib.h zconf.h
 inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
-inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
-infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
 inftrees.o: zutil.h zlib.h zconf.h inftrees.h
-minigzip.o: zlib.h zconf.h
 trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
-uncompr.o: zlib.h zconf.h
+
-zutil.o: zutil.h zlib.h zconf.h
+adler32.lo zutil.lo: zutil.h zlib.h zconf.h
+gzclose.lo gzlib.lo gzread.lo gzwrite.lo: zlib.h zconf.h gzguts.h
+compress.lo example.lo minigzip.lo uncompr.lo: zlib.h zconf.h
+crc32.lo: zutil.h zlib.h zconf.h crc32.h
+deflate.lo: deflate.h zutil.h zlib.h zconf.h
+infback.lo inflate.lo: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h inffixed.h
+inffast.lo: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inftrees.lo: zutil.h zlib.h zconf.h inftrees.h
+trees.lo: deflate.h zutil.h zlib.h zconf.h trees.h

README

@@ -1,57 +1,52 @@
 ZLIB DATA COMPRESSION LIBRARY
 
-zlib 1.2.1 is a general purpose data compression library.  All the code is
+zlib 1.2.5 is a general purpose data compression library.  All the code is
 thread safe.  The data format used by the zlib library is described by RFCs
 (Request for Comments) 1950 to 1952 in the files
 http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
-and rfc1952.txt (gzip format). These documents are also available in other
+and rfc1952.txt (gzip format).
-formats from ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
 
 All functions of the compression library are documented in the file zlib.h
-(volunteer to write man pages welcome, contact zlib@gzip.org). A usage example
+(volunteer to write man pages welcome, contact zlib@gzip.org).  A usage example
 of the library is given in the file example.c which also tests that the library
-is working correctly. Another example is given in the file minigzip.c. The
+is working correctly.  Another example is given in the file minigzip.c.  The
 compression library itself is composed of all source files except example.c and
 minigzip.c.
 
 To compile all files and run the test program, follow the instructions given at
-the top of Makefile. In short "make test; make install" should work for most
+the top of Makefile.in.  In short "./configure; make test", and if that goes
-machines. For Unix: "./configure; make test; make install" For MSDOS, use one
+well, "make install" should work for most flavors of Unix.  For Windows, use one
-of the special makefiles such as Makefile.msc. For VMS, use Make_vms.com or
+of the special makefiles in win32/ or contrib/vstudio/ .  For VMS, use
-descrip.mms.
+make_vms.com.
 
 Questions about zlib should be sent to <zlib@gzip.org>, or to Gilles Vollant
-<info@winimage.com> for the Windows DLL version. The zlib home page is
+<info@winimage.com> for the Windows DLL version.  The zlib home page is
-http://www.zlib.org or http://www.gzip.org/zlib/ Before reporting a problem,
+http://zlib.net/ .  Before reporting a problem, please check this site to
-please check this site to verify that you have the latest version of zlib;
+verify that you have the latest version of zlib; otherwise get the latest
-otherwise get the latest version and check whether the problem still exists or
+version and check whether the problem still exists or not.
-not.
 
-PLEASE read the zlib FAQ http://www.gzip.org/zlib/zlib_faq.html before asking
+PLEASE read the zlib FAQ http://zlib.net/zlib_faq.html before asking for help.
-for help.
 
-Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan. 1997
+Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan.  1997
-issue of  Dr. Dobb's Journal; a copy of the article is available in
+issue of Dr.  Dobb's Journal; a copy of the article is available at
-http://dogma.net/markn/articles/zlibtool/zlibtool.htm
+http://marknelson.us/1997/01/01/zlib-engine/ .
 
-The changes made in version 1.2.1 are documented in the file ChangeLog.
+The changes made in version 1.2.5 are documented in the file ChangeLog.
 
-Unsupported third party contributions are provided in directory "contrib".
+Unsupported third party contributions are provided in directory contrib/ .
 
-A Java implementation of zlib is available in the Java Development Kit
+zlib is available in Java using the java.util.zip package, documented at
-http://java.sun.com/j2se/1.4.2/docs/api/java/util/zip/package-summary.html
+http://java.sun.com/developer/technicalArticles/Programming/compression/ .
-See the zlib home page http://www.zlib.org for details.
 
-A Perl interface to zlib written by Paul Marquess <pmqs@cpan.org> is in the
+A Perl interface to zlib written by Paul Marquess <pmqs@cpan.org> is available
-CPAN (Comprehensive Perl Archive Network) sites
+at CPAN (Comprehensive Perl Archive Network) sites, including
-http://www.cpan.org/modules/by-module/Compress/
+http://search.cpan.org/~pmqs/IO-Compress-Zlib/ .
 
-A Python interface to zlib written by A.M. Kuchling <amk@magnet.com> is
+A Python interface to zlib written by A.M. Kuchling <amk@amk.ca> is
 available in Python 1.5 and later versions, see
-http://www.python.org/doc/lib/module-zlib.html
+http://www.python.org/doc/lib/module-zlib.html .
 
-A zlib binding for TCL written by Andreas Kupries <a.kupries@westend.com> is
+zlib is built into tcl: http://wiki.tcl.tk/4610 .
-availlable at http://www.oche.de/~akupries/soft/trf/trf_zip.html
 
 An experimental package to read and write files in .zip format, written on top
 of zlib by Gilles Vollant <info@winimage.com>, is available in the
@@ -75,25 +70,21 @@ Notes for some targets:
 - zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works with
   other compilers. Use "make test" to check your compiler.
 
-- gzdopen is not supported on RISCOS, BEOS and by some Mac compilers.
+- gzdopen is not supported on RISCOS or BEOS.
 
 - For PalmOs, see http://palmzlib.sourceforge.net/
 
-- When building a shared, i.e. dynamic library on Mac OS X, the library must be
-  installed before testing (do "make install" before "make test"), since the
-  library location is specified in the library.
-
 
 Acknowledgments:
 
-  The deflate format used by zlib was defined by Phil Katz. The deflate
+  The deflate format used by zlib was defined by Phil Katz.  The deflate and
-  and zlib specifications were written by L. Peter Deutsch. Thanks to all the
+  zlib specifications were written by L.  Peter Deutsch.  Thanks to all the
-  people who reported problems and suggested various improvements in zlib;
+  people who reported problems and suggested various improvements in zlib; they
-  they are too numerous to cite here.
+  are too numerous to cite here.
 
 Copyright notice:
 
- (C) 1995-2003 Jean-loup Gailly and Mark Adler
+ (C) 1995-2010 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
@@ -114,13 +105,11 @@ Copyright notice:
   Jean-loup Gailly        Mark Adler
   jloup@gzip.org          madler@alumni.caltech.edu
 
-If you use the zlib library in a product, we would appreciate *not*
+If you use the zlib library in a product, we would appreciate *not* receiving
-receiving lengthy legal documents to sign. The sources are provided
+lengthy legal documents to sign.  The sources are provided for free but without
-for free but without warranty of any kind.  The library has been
+warranty of any kind.  The library has been entirely written by Jean-loup
-entirely written by Jean-loup Gailly and Mark Adler; it does not
+Gailly and Mark Adler; it does not include third-party code.
-include third-party code.
 
-If you redistribute modified sources, we would appreciate that you include
+If you redistribute modified sources, we would appreciate that you include in
-in the file ChangeLog history information documenting your changes. Please
+the file ChangeLog history information documenting your changes.  Please read
-read the FAQ for more information on the distribution of modified source
+the FAQ for more information on the distribution of modified source versions.
-versions.

adler32.c

@@ -1,23 +1,27 @@
 /* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2007 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
 /* @(#) $Id$ */
 
-#define ZLIB_INTERNAL
+#include "zutil.h"
-#include "zlib.h"
+
+#define local static
+
+local uLong adler32_combine_(uLong adler1, uLong adler2, z_off64_t len2);
 
 #define BASE 65521UL    /* largest prime smaller than 65536 */
 #define NMAX 5552
 /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
 
-#define DO1(buf,i)  {s1 += buf[i]; s2 += s1;}
+#define DO1(buf,i)  {adler += (buf)[i]; sum2 += adler;}
 #define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
 #define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
 #define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
 #define DO16(buf)   DO8(buf,0); DO8(buf,8);
 
+/* use NO_DIVIDE if your processor does not do division in hardware */
 #ifdef NO_DIVIDE
 #  define MOD(a) \
     do { \
@@ -39,8 +43,17 @@
         if (a >= (BASE << 1)) a -= (BASE << 1); \
         if (a >= BASE) a -= BASE; \
     } while (0)
+#  define MOD4(a) \
+    do { \
+        if (a >= (BASE << 4)) a -= (BASE << 4); \
+        if (a >= (BASE << 3)) a -= (BASE << 3); \
+        if (a >= (BASE << 2)) a -= (BASE << 2); \
+        if (a >= (BASE << 1)) a -= (BASE << 1); \
+        if (a >= BASE) a -= BASE; \
+    } while (0)
 #else
 #  define MOD(a) a %= BASE
+#  define MOD4(a) a %= BASE
 #endif
 
 /* ========================================================================= */
@@ -49,26 +62,108 @@ uLong ZEXPORT adler32(adler, buf, len)
     const Bytef *buf;
     uInt len;
 {
-    unsigned long s1 = adler & 0xffff;
+    unsigned long sum2;
-    unsigned long s2 = (adler >> 16) & 0xffff;
+    unsigned n;
-    int k;
 
-    if (buf == Z_NULL) return 1L;
+    /* split Adler-32 into component sums */
+    sum2 = (adler >> 16) & 0xffff;
+    adler &= 0xffff;
 
-    while (len > 0) {
+    /* in case user likes doing a byte at a time, keep it fast */
-        k = len < NMAX ? (int)len : NMAX;
+    if (len == 1) {
-        len -= k;
+        adler += buf[0];
-        while (k >= 16) {
+        if (adler >= BASE)
+            adler -= BASE;
+        sum2 += adler;
+        if (sum2 >= BASE)
+            sum2 -= BASE;
+        return adler | (sum2 << 16);
+    }
+
+    /* initial Adler-32 value (deferred check for len == 1 speed) */
+    if (buf == Z_NULL)
+        return 1L;
+
+    /* in case short lengths are provided, keep it somewhat fast */
+    if (len < 16) {
+        while (len--) {
+            adler += *buf++;
+            sum2 += adler;
+        }
+        if (adler >= BASE)
+            adler -= BASE;
+        MOD4(sum2);             /* only added so many BASE's */
+        return adler | (sum2 << 16);
+    }
+
+    /* do length NMAX blocks -- requires just one modulo operation */
+    while (len >= NMAX) {
+        len -= NMAX;
+        n = NMAX / 16;          /* NMAX is divisible by 16 */
+        do {
+            DO16(buf);          /* 16 sums unrolled */
+            buf += 16;
+        } while (--n);
+        MOD(adler);
+        MOD(sum2);
+    }
+
+    /* do remaining bytes (less than NMAX, still just one modulo) */
+    if (len) {                  /* avoid modulos if none remaining */
+        while (len >= 16) {
+            len -= 16;
             DO16(buf);
             buf += 16;
-            k -= 16;
         }
-        if (k != 0) do {
+        while (len--) {
-            s1 += *buf++;
+            adler += *buf++;
-            s2 += s1;
+            sum2 += adler;
-        } while (--k);
+        }
-        MOD(s1);
+        MOD(adler);
-        MOD(s2);
+        MOD(sum2);
     }
-    return (s2 << 16) | s1;
+
+    /* return recombined sums */
+    return adler | (sum2 << 16);
+}
+
+/* ========================================================================= */
+local uLong adler32_combine_(adler1, adler2, len2)
+    uLong adler1;
+    uLong adler2;
+    z_off64_t len2;
+{
+    unsigned long sum1;
+    unsigned long sum2;
+    unsigned rem;
+
+    /* the derivation of this formula is left as an exercise for the reader */
+    rem = (unsigned)(len2 % BASE);
+    sum1 = adler1 & 0xffff;
+    sum2 = rem * sum1;
+    MOD(sum2);
+    sum1 += (adler2 & 0xffff) + BASE - 1;
+    sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
+    if (sum1 >= BASE) sum1 -= BASE;
+    if (sum1 >= BASE) sum1 -= BASE;
+    if (sum2 >= (BASE << 1)) sum2 -= (BASE << 1);
+    if (sum2 >= BASE) sum2 -= BASE;
+    return sum1 | (sum2 << 16);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT adler32_combine(adler1, adler2, len2)
+    uLong adler1;
+    uLong adler2;
+    z_off_t len2;
+{
+    return adler32_combine_(adler1, adler2, len2);
+}
+
+uLong ZEXPORT adler32_combine64(adler1, adler2, len2)
+    uLong adler1;
+    uLong adler2;
+    z_off64_t len2;
+{
+    return adler32_combine_(adler1, adler2, len2);
 }

amiga/Makefile.pup

@@ -14,8 +14,8 @@ LDFLAGS	= -o
 LDLIBS	= LIB:scppc.a LIB:end.o
 RM	= delete quiet
 
-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \
-       zutil.o inflate.o infback.o inftrees.o inffast.o
+       uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o
 
 TEST_OBJS = example.o minigzip.o
 
@@ -55,7 +55,10 @@ compress.o: zlib.h zconf.h
 crc32.o: crc32.h zlib.h zconf.h
 deflate.o: deflate.h zutil.h zlib.h zconf.h
 example.o: zlib.h zconf.h
-gzio.o: zutil.h zlib.h zconf.h
+gzclose.o: zlib.h zconf.h gzguts.h
+gzlib.o: zlib.h zconf.h gzguts.h
+gzread.o: zlib.h zconf.h gzguts.h
+gzwrite.o: zlib.h zconf.h gzguts.h
 inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
 inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
 infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h

amiga/Makefile.sas

@@ -13,8 +13,8 @@ SCOPTIONS=OPTSCHED OPTINLINE OPTALIAS OPTTIME OPTINLOCAL STRMERGE \
        NOICONS PARMS=BOTH NOSTACKCHECK UTILLIB NOVERSION ERRORREXX \
        DEF=POSTINC
 
-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \
-       zutil.o inflate.o infback.o inftrees.o inffast.o
+       uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o
 
 TEST_OBJS = example.o minigzip.o
 
@@ -54,7 +54,10 @@ compress.o: zlib.h zconf.h
 crc32.o: crc32.h zlib.h zconf.h
 deflate.o: deflate.h zutil.h zlib.h zconf.h
 example.o: zlib.h zconf.h
-gzio.o: zutil.h zlib.h zconf.h
+gzclose.o: zlib.h zconf.h gzguts.h
+gzlib.o: zlib.h zconf.h gzguts.h
+gzread.o: zlib.h zconf.h gzguts.h
+gzwrite.o: zlib.h zconf.h gzguts.h
 inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
 inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
 infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h

compress.c

@@ -1,5 +1,5 @@
 /* compress.c -- compress a memory buffer
- * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -75,5 +75,6 @@ int ZEXPORT compress (dest, destLen, source, sourceLen)
 uLong ZEXPORT compressBound (sourceLen)
     uLong sourceLen;
 {
-    return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) + 11;
+    return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
+           (sourceLen >> 25) + 13;
 }

configure

@@ -1,37 +1,61 @@
 #!/bin/sh
-# configure script for zlib. This script is needed only if
+# configure script for zlib.
-# you wish to build a shared library and your system supports them,
-# of if you need special compiler, flags or install directory.
-# Otherwise, you can just use directly "make test; make install"
 #
-# To create a shared library, use "configure --shared"; by default a static
+# Normally configure builds both a static and a shared library.
-# library is created. If the primitive shared library support provided here
+# If you want to build just a static library, use: ./configure --static
-# does not work, use ftp://prep.ai.mit.edu/pub/gnu/libtool-*.tar.gz
 #
 # To impose specific compiler or flags or install directory, use for example:
 #    prefix=$HOME CC=cc CFLAGS="-O4" ./configure
 # or for csh/tcsh users:
 #    (setenv prefix $HOME; setenv CC cc; setenv CFLAGS "-O4"; ./configure)
-# LDSHARED is the command to be used to create a shared library
 
 # Incorrect settings of CC or CFLAGS may prevent creating a shared library.
 # If you have problems, try without defining CC and CFLAGS before reporting
 # an error.
 
-LIBS=libz.a
+if [ -n "${CHOST}" ]; then
-LDFLAGS="-L. ${LIBS}"
+    uname="$(echo "${CHOST}" | sed -e 's/^[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)-.*$/\1/')"
+    CROSS_PREFIX="${CHOST}-"
+fi
+
+STATICLIB=libz.a
+LDFLAGS="${LDFLAGS} -L. ${STATICLIB}"
 VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`
+VER3=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\\.[0-9]*\).*/\1/p' < zlib.h`
 VER2=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\)\\..*/\1/p' < zlib.h`
 VER1=`sed -n -e '/VERSION "/s/.*"\([0-9]*\)\\..*/\1/p' < zlib.h`
-AR=${AR-"ar rc"}
+if "${CROSS_PREFIX}ar" --version >/dev/null 2>/dev/null || test $? -lt 126; then
-RANLIB=${RANLIB-"ranlib"}
+    AR=${AR-"${CROSS_PREFIX}ar"}
+    test -n "${CROSS_PREFIX}" && echo Using ${AR}
+else
+    AR=${AR-"ar"}
+    test -n "${CROSS_PREFIX}" && echo Using ${AR}
+fi
+AR_RC="${AR} rc"
+if "${CROSS_PREFIX}ranlib" --version >/dev/null 2>/dev/null || test $? -lt 126; then
+    RANLIB=${RANLIB-"${CROSS_PREFIX}ranlib"}
+    test -n "${CROSS_PREFIX}" && echo Using ${RANLIB}
+else
+    RANLIB=${RANLIB-"ranlib"}
+fi
+if "${CROSS_PREFIX}nm" --version >/dev/null 2>/dev/null || test $? -lt 126; then
+    NM=${NM-"${CROSS_PREFIX}nm"}
+    test -n "${CROSS_PREFIX}" && echo Using ${NM}
+else
+    NM=${NM-"nm"}
+fi
+LDCONFIG=${LDCONFIG-"ldconfig"}
+LDSHAREDLIBC="${LDSHAREDLIBC--lc}"
 prefix=${prefix-/usr/local}
 exec_prefix=${exec_prefix-'${prefix}'}
 libdir=${libdir-'${exec_prefix}/lib'}
+sharedlibdir=${sharedlibdir-'${libdir}'}
 includedir=${includedir-'${prefix}/include'}
 mandir=${mandir-'${prefix}/share/man'}
 shared_ext='.so'
-shared=0
+shared=1
+zprefix=0
+build64=0
 gcc=0
 old_cc="$CC"
 old_cflags="$CFLAGS"
@@ -39,21 +63,29 @@ old_cflags="$CFLAGS"
 while test $# -ge 1
 do
 case "$1" in
-    -h* | --h*)
+    -h* | --help)
       echo 'usage:'
-      echo '  configure [--shared] [--prefix=PREFIX]  [--exec_prefix=EXPREFIX]'
+      echo '  configure [--zprefix] [--prefix=PREFIX]  [--eprefix=EXPREFIX]'
-      echo '     [--libdir=LIBDIR] [--includedir=INCLUDEDIR]'
+      echo '    [--static] [--64] [--libdir=LIBDIR] [--sharedlibdir=LIBDIR]'
-        exit 0;;
+      echo '    [--includedir=INCLUDEDIR]'
-    -p*=* | --p*=*) prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
+        exit 0 ;;
-    -e*=* | --e*=*) exec_prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
+    -p*=* | --prefix=*) prefix=`echo $1 | sed 's/.*=//'`; shift ;;
-    -l*=* | --libdir=*) libdir=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
+    -e*=* | --eprefix=*) exec_prefix=`echo $1 | sed 's/.*=//'`; shift ;;
-    -i*=* | --includedir=*) includedir=`echo $1 | sed 's/[-a-z_]*=//'`;shift;;
+    -l*=* | --libdir=*) libdir=`echo $1 | sed 's/.*=//'`; shift ;;
-    -p* | --p*) prefix="$2"; shift; shift;;
+    --sharedlibdir=*) sharedlibdir=`echo $1 | sed 's/.*=//'`; shift ;;
-    -e* | --e*) exec_prefix="$2"; shift; shift;;
+    -i*=* | --includedir=*) includedir=`echo $1 | sed 's/.*=//'`;shift ;;
-    -l* | --l*) libdir="$2"; shift; shift;;
+    -u*=* | --uname=*) uname=`echo $1 | sed 's/.*=//'`;shift ;;
-    -i* | --i*) includedir="$2"; shift; shift;;
+    -p* | --prefix) prefix="$2"; shift; shift ;;
-    -s* | --s*) shared=1; shift;;
+    -e* | --eprefix) exec_prefix="$2"; shift; shift ;;
-    *) echo "unknown option: $1"; echo "$0 --help for help"; exit 1;;
+    -l* | --libdir) libdir="$2"; shift; shift ;;
+    -i* | --includedir) includedir="$2"; shift; shift ;;
+    -s* | --shared | --enable-shared) shared=1; shift ;;
+    -t | --static) shared=0; shift ;;
+    -z* | --zprefix) zprefix=1; shift ;;
+    -6* | --64) build64=1; shift ;;
+    --sysconfdir=*) echo "ignored option: --sysconfdir"; shift ;;
+    --localstatedir=*) echo "ignored option: --localstatedir"; shift ;;
+    *) echo "unknown option: $1"; echo "$0 --help for help"; exit 1 ;;
     esac
 done
 
@@ -63,90 +95,133 @@ extern int getchar();
 int hello() {return getchar();}
 EOF
 
-test -z "$CC" && echo Checking for gcc...
+test -z "$CC" && echo Checking for ${CROSS_PREFIX}gcc...
-cc=${CC-gcc}
+cc=${CC-${CROSS_PREFIX}gcc}
 cflags=${CFLAGS-"-O3"}
 # to force the asm version use: CFLAGS="-O3 -DASMV" ./configure
 case "$cc" in
-  *gcc*) gcc=1;;
+  *gcc*) gcc=1 ;;
 esac
 
 if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
   CC="$cc"
-  SFLAGS=${CFLAGS-"-fPIC -O3"}
+  SFLAGS="${CFLAGS--O3} -fPIC"
-  CFLAGS="$cflags"
+  CFLAGS="${CFLAGS--O3}"
-  case `(uname -s || echo unknown) 2>/dev/null` in
+  if test $build64 -eq 1; then
-  Linux | linux | GNU | GNU/*) LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1"};;
+    CFLAGS="${CFLAGS} -m64"
-  CYGWIN* | Cygwin* | cygwin* )
+    SFLAGS="${SFLAGS} -m64"
-             EXE='.exe';;
+  fi
+  if test "${ZLIBGCCWARN}" = "YES"; then
+    CFLAGS="${CFLAGS} -Wall -Wextra -pedantic"
+  fi
+  if test -z "$uname"; then
+    uname=`(uname -s || echo unknown) 2>/dev/null`
+  fi
+  case "$uname" in
+  Linux* | linux* | GNU | GNU/* | *BSD | DragonFly) LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map"} ;;
+  CYGWIN* | Cygwin* | cygwin* | OS/2*)
+        EXE='.exe' ;;
+  MINGW*|mingw*)
+# temporary bypass
+        rm -f $test.[co] $test $test$shared_ext
+        echo "Please use win32/Makefile.gcc instead."
+        exit 1
+        LDSHARED=${LDSHARED-"$cc -shared"}
+        LDSHAREDLIBC=""
+        EXE='.exe' ;;
   QNX*)  # This is for QNX6. I suppose that the QNX rule below is for QNX2,QNX4
          # (alain.bonnefoy@icbt.com)
-                 LDSHARED=${LDSHARED-"$cc -shared -Wl,-hlibz.so.1"};;
+                 LDSHARED=${LDSHARED-"$cc -shared -Wl,-hlibz.so.1"} ;;
-  HP-UX*)        LDSHARED=${LDSHARED-"$cc -shared $SFLAGS"}
+  HP-UX*)
+         LDSHARED=${LDSHARED-"$cc -shared $SFLAGS"}
+         case `(uname -m || echo unknown) 2>/dev/null` in
+         ia64)
+                 shared_ext='.so'
+                 SHAREDLIB='libz.so' ;;
+         *)
                  shared_ext='.sl'
-                 SHAREDLIB='libz.sl';;
+                 SHAREDLIB='libz.sl' ;;
+         esac ;;
   Darwin*)   shared_ext='.dylib'
              SHAREDLIB=libz$shared_ext
              SHAREDLIBV=libz.$VER$shared_ext
              SHAREDLIBM=libz.$VER1$shared_ext
-             LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name /usr/lib/$SHAREDLIBV -compatibility_version $VER2 -current_version $VER"}
+             LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER3"} ;;
-             libdir='/usr/lib'
+  *)             LDSHARED=${LDSHARED-"$cc -shared"} ;;
-             includedir='/usr/include';;
-  *)             LDSHARED=${LDSHARED-"$cc -shared"};;
   esac
 else
   # find system name and corresponding cc options
   CC=${CC-cc}
-  case `(uname -sr || echo unknown) 2>/dev/null` in
+  gcc=0
+  if test -z "$uname"; then
+    uname=`(uname -sr || echo unknown) 2>/dev/null`
+  fi
+  case "$uname" in
   HP-UX*)    SFLAGS=${CFLAGS-"-O +z"}
              CFLAGS=${CFLAGS-"-O"}
 #            LDSHARED=${LDSHARED-"ld -b +vnocompatwarnings"}
              LDSHARED=${LDSHARED-"ld -b"}
+         case `(uname -m || echo unknown) 2>/dev/null` in
+         ia64)
+             shared_ext='.so'
+             SHAREDLIB='libz.so' ;;
+         *)
              shared_ext='.sl'
-             SHAREDLIB='libz.sl';;
+             SHAREDLIB='libz.sl' ;;
+         esac ;;
   IRIX*)     SFLAGS=${CFLAGS-"-ansi -O2 -rpath ."}
              CFLAGS=${CFLAGS-"-ansi -O2"}
-             LDSHARED=${LDSHARED-"cc -shared"};;
+             LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so.1"} ;;
   OSF1\ V4*) SFLAGS=${CFLAGS-"-O -std1"}
              CFLAGS=${CFLAGS-"-O -std1"}
-             LDSHARED=${LDSHARED-"cc -shared  -Wl,-soname,libz.so -Wl,-msym -Wl,-rpath,$(libdir) -Wl,-set_version,${VER}:1.0"};;
+             LDFLAGS="${LDFLAGS} -Wl,-rpath,."
+             LDSHARED=${LDSHARED-"cc -shared  -Wl,-soname,libz.so -Wl,-msym -Wl,-rpath,$(libdir) -Wl,-set_version,${VER}:1.0"} ;;
   OSF1*)     SFLAGS=${CFLAGS-"-O -std1"}
              CFLAGS=${CFLAGS-"-O -std1"}
-             LDSHARED=${LDSHARED-"cc -shared"};;
+             LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so.1"} ;;
   QNX*)      SFLAGS=${CFLAGS-"-4 -O"}
              CFLAGS=${CFLAGS-"-4 -O"}
              LDSHARED=${LDSHARED-"cc"}
              RANLIB=${RANLIB-"true"}
-             AR="cc -A";;
+             AR_RC="cc -A" ;;
   SCO_SV\ 3.2*) SFLAGS=${CFLAGS-"-O3 -dy -KPIC "}
              CFLAGS=${CFLAGS-"-O3"}
-             LDSHARED=${LDSHARED-"cc -dy -KPIC -G"};;
+             LDSHARED=${LDSHARED-"cc -dy -KPIC -G"} ;;
-  SunOS\ 5*) SFLAGS=${CFLAGS-"-fast -xcg89 -KPIC -R."}
+  SunOS\ 5*) LDSHARED=${LDSHARED-"cc -G"}
-             CFLAGS=${CFLAGS-"-fast -xcg89"}
+         case `(uname -m || echo unknown) 2>/dev/null` in
-             LDSHARED=${LDSHARED-"cc -G"};;
+         i86*)
+             SFLAGS=${CFLAGS-"-xpentium -fast -KPIC -R."}
+             CFLAGS=${CFLAGS-"-xpentium -fast"} ;;
+         *)
+             SFLAGS=${CFLAGS-"-fast -xcg92 -KPIC -R."}
+             CFLAGS=${CFLAGS-"-fast -xcg92"} ;;
+         esac ;;
   SunOS\ 4*) SFLAGS=${CFLAGS-"-O2 -PIC"}
              CFLAGS=${CFLAGS-"-O2"}
-             LDSHARED=${LDSHARED-"ld"};;
+             LDSHARED=${LDSHARED-"ld"} ;;
+  SunStudio\ 9*) SFLAGS=${CFLAGS-"-fast -xcode=pic32 -xtarget=ultra3 -xarch=v9b"}
+             CFLAGS=${CFLAGS-"-fast -xtarget=ultra3 -xarch=v9b"}
+             LDSHARED=${LDSHARED-"cc -xarch=v9b"} ;;
   UNIX_System_V\ 4.2.0)
              SFLAGS=${CFLAGS-"-KPIC -O"}
              CFLAGS=${CFLAGS-"-O"}
-             LDSHARED=${LDSHARED-"cc -G"};;
+             LDSHARED=${LDSHARED-"cc -G"} ;;
   UNIX_SV\ 4.2MP)
              SFLAGS=${CFLAGS-"-Kconform_pic -O"}
              CFLAGS=${CFLAGS-"-O"}
-             LDSHARED=${LDSHARED-"cc -G"};;
+             LDSHARED=${LDSHARED-"cc -G"} ;;
   OpenUNIX\ 5)
              SFLAGS=${CFLAGS-"-KPIC -O"}
              CFLAGS=${CFLAGS-"-O"}
-             LDSHARED=${LDSHARED-"cc -G"};;
+             LDSHARED=${LDSHARED-"cc -G"} ;;
   AIX*)  # Courtesy of dbakker@arrayasolutions.com
              SFLAGS=${CFLAGS-"-O -qmaxmem=8192"}
              CFLAGS=${CFLAGS-"-O -qmaxmem=8192"}
-             LDSHARED=${LDSHARED-"xlc -G"};;
+             LDSHARED=${LDSHARED-"xlc -G"} ;;
-  # send working options for other systems to support@gzip.org
+  # send working options for other systems to zlib@gzip.org
   *)         SFLAGS=${CFLAGS-"-O"}
              CFLAGS=${CFLAGS-"-O"}
-             LDSHARED=${LDSHARED-"cc -shared"};;
+             LDSHARED=${LDSHARED-"cc -shared"} ;;
   esac
 fi
 
@@ -157,38 +232,83 @@ SHAREDLIBM=${SHAREDLIBM-"libz$shared_ext.$VER1"}
 if test $shared -eq 1; then
   echo Checking for shared library support...
   # we must test in two steps (cc then ld), required at least on SunOS 4.x
-  if test "`($CC -c $SFLAGS $test.c) 2>&1`" = "" &&
+  if test "`($CC -w -c $SFLAGS $test.c) 2>&1`" = "" &&
-     test "`($LDSHARED -o $test$shared_ext $test.o) 2>&1`" = ""; then
+     test "`($LDSHARED $SFLAGS -o $test$shared_ext $test.o) 2>&1`" = ""; then
-    CFLAGS="$SFLAGS"
-    LIBS="$SHAREDLIBV"
     echo Building shared library $SHAREDLIBV with $CC.
   elif test -z "$old_cc" -a -z "$old_cflags"; then
     echo No shared library support.
     shared=0;
   else
+    echo Tested $CC -w -c $SFLAGS $test.c
+    $CC -w -c $SFLAGS $test.c
+    echo Tested $LDSHARED $SFLAGS -o $test$shared_ext $test.o
+    $LDSHARED $SFLAGS -o $test$shared_ext $test.o
     echo 'No shared library support; try without defining CC and CFLAGS'
     shared=0;
   fi
 fi
 if test $shared -eq 0; then
   LDSHARED="$CC"
-  echo Building static library $LIBS version $VER with $CC.
+  ALL="static"
+  TEST="all teststatic"
+  SHAREDLIB=""
+  SHAREDLIBV=""
+  SHAREDLIBM=""
+  echo Building static library $STATICLIB version $VER with $CC.
 else
-  LDFLAGS="-L. ${SHAREDLIBV}"
+  ALL="static shared"
+  TEST="all teststatic testshared"
 fi
 
+cat > $test.c <<EOF
+#include <sys/types.h>
+off64_t dummy = 0;
+EOF
+if test "`($CC -c $CFLAGS -D_LARGEFILE64_SOURCE=1 $test.c) 2>&1`" = ""; then
+  CFLAGS="${CFLAGS} -D_LARGEFILE64_SOURCE=1"
+  SFLAGS="${SFLAGS} -D_LARGEFILE64_SOURCE=1"
+  ALL="${ALL} all64"
+  TEST="${TEST} test64"
+  echo "Checking for off64_t... Yes."
+  echo "Checking for fseeko... Yes."
+else
+  echo "Checking for off64_t... No."
+  cat > $test.c <<EOF
+#include <stdio.h>
+int main(void) {
+  fseeko(NULL, 0, 0);
+  return 0;
+}
+EOF
+  if test "`($CC $CFLAGS -o $test $test.c) 2>&1`" = ""; then
+    echo "Checking for fseeko... Yes."
+  else
+    CFLAGS="${CFLAGS} -DNO_FSEEKO"
+    SFLAGS="${SFLAGS} -DNO_FSEEKO"
+    echo "Checking for fseeko... No."
+  fi
+fi
+
+cp -p zconf.h.in zconf.h
+
 cat > $test.c <<EOF
 #include <unistd.h>
 int main() { return 0; }
 EOF
 if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
-  sed < zconf.in.h "/HAVE_UNISTD_H/s%0%1%" > zconf.h
+  sed < zconf.h "/^#ifdef HAVE_UNISTD_H.* may be/s/def HAVE_UNISTD_H\(.*\) may be/ 1\1 was/" > zconf.temp.h
+  mv zconf.temp.h zconf.h
   echo "Checking for unistd.h... Yes."
 else
-  cp -p zconf.in.h zconf.h
   echo "Checking for unistd.h... No."
 fi
 
+if test $zprefix -eq 1; then
+  sed < zconf.h "/#ifdef Z_PREFIX.* may be/s/def Z_PREFIX\(.*\) may be/ 1\1 was/" > zconf.temp.h
+  mv zconf.temp.h zconf.h
+  echo "Using z_ prefix on all symbols."
+fi
+
 cat > $test.c <<EOF
 #include <stdio.h>
 #include <stdarg.h>
@@ -205,13 +325,13 @@ int main()
 EOF
 
 if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
-  echo "Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf()"
+  echo "Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf()."
 
   cat > $test.c <<EOF
 #include <stdio.h>
 #include <stdarg.h>
 
-int mytest(char *fmt, ...)
+int mytest(const char *fmt, ...)
 {
   char buf[20];
   va_list ap;
@@ -235,7 +355,7 @@ EOF
 #include <stdio.h>
 #include <stdarg.h>
 
-int mytest(char *fmt, ...)
+int mytest(const char *fmt, ...)
 {
   int n;
   char buf[20];
@@ -257,6 +377,7 @@ EOF
       echo "Checking for return value of vsnprintf()... Yes."
     else
       CFLAGS="$CFLAGS -DHAS_vsnprintf_void"
+      SFLAGS="$SFLAGS -DHAS_vsnprintf_void"
       echo "Checking for return value of vsnprintf()... No."
       echo "  WARNING: apparently vsnprintf() does not return a value. zlib"
       echo "  can build but will be open to possible string-format security"
@@ -264,6 +385,7 @@ EOF
     fi
   else
     CFLAGS="$CFLAGS -DNO_vsnprintf"
+    SFLAGS="$SFLAGS -DNO_vsnprintf"
     echo "Checking for vsnprintf() in stdio.h... No."
     echo "  WARNING: vsnprintf() not found, falling back to vsprintf(). zlib"
     echo "  can build but will be open to possible buffer-overflow security"
@@ -273,7 +395,7 @@ EOF
 #include <stdio.h>
 #include <stdarg.h>
 
-int mytest(char *fmt, ...)
+int mytest(const char *fmt, ...)
 {
   int n;
   char buf[20];
@@ -295,6 +417,7 @@ EOF
       echo "Checking for return value of vsprintf()... Yes."
     else
       CFLAGS="$CFLAGS -DHAS_vsprintf_void"
+      SFLAGS="$SFLAGS -DHAS_vsprintf_void"
       echo "Checking for return value of vsprintf()... No."
       echo "  WARNING: apparently vsprintf() does not return a value. zlib"
       echo "  can build but will be open to possible string-format security"
@@ -302,7 +425,7 @@ EOF
     fi
   fi
 else
-  echo "Checking whether to use vs[n]printf() or s[n]printf()... using s[n]printf()"
+  echo "Checking whether to use vs[n]printf() or s[n]printf()... using s[n]printf()."
 
   cat >$test.c <<EOF
 #include <stdio.h>
@@ -344,6 +467,7 @@ EOF
       echo "Checking for return value of snprintf()... Yes."
     else
       CFLAGS="$CFLAGS -DHAS_snprintf_void"
+      SFLAGS="$SFLAGS -DHAS_snprintf_void"
       echo "Checking for return value of snprintf()... No."
       echo "  WARNING: apparently snprintf() does not return a value. zlib"
       echo "  can build but will be open to possible string-format security"
@@ -351,6 +475,7 @@ EOF
     fi
   else
     CFLAGS="$CFLAGS -DNO_snprintf"
+    SFLAGS="$SFLAGS -DNO_snprintf"
     echo "Checking for snprintf() in stdio.h... No."
     echo "  WARNING: snprintf() not found, falling back to sprintf(). zlib"
     echo "  can build but will be open to possible buffer-overflow security"
@@ -376,6 +501,7 @@ EOF
       echo "Checking for return value of sprintf()... Yes."
     else
       CFLAGS="$CFLAGS -DHAS_sprintf_void"
+      SFLAGS="$SFLAGS -DHAS_sprintf_void"
       echo "Checking for return value of sprintf()... No."
       echo "  WARNING: apparently sprintf() does not return a value. zlib"
       echo "  can build but will be open to possible string-format security"
@@ -384,41 +510,37 @@ EOF
   fi
 fi
 
-cat >$test.c <<EOF
+if test "$gcc" -eq 1; then
-#include <errno.h>
+  cat > $test.c <<EOF
-int main() { return 0; }
+#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33)
-EOF
+#  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
-if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+#else
-  echo "Checking for errno.h... Yes."
+#  define ZLIB_INTERNAL
-else
+#endif
-  echo "Checking for errno.h... No."
+int ZLIB_INTERNAL foo;
-  CFLAGS="$CFLAGS -DNO_ERRNO_H"
+int main()
-fi
+{
-
+  return 0;
-cat > $test.c <<EOF
-#include <sys/types.h>
-#include <sys/mman.h>
-#include <sys/stat.h>
-caddr_t hello() {
-  return mmap((caddr_t)0, (off_t)0, PROT_READ, MAP_SHARED, 0, (off_t)0);
 }
 EOF
-if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+  if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
-  CFLAGS="$CFLAGS -DUSE_MMAP"
+    echo "Checking for attribute(visibility) support... Yes."
-  echo Checking for mmap support... Yes.
+  else
-else
+    CFLAGS="$CFLAGS -DNO_VIZ"
-  echo Checking for mmap support... No.
+    SFLAGS="$SFLAGS -DNO_VIZ"
+    echo "Checking for attribute(visibility) support... No."
+  fi
 fi
 
 CPP=${CPP-"$CC -E"}
 case $CFLAGS in
   *ASMV*)
-    if test "`nm $test.o | grep _hello`" = ""; then
+    if test "`$NM $test.o | grep _hello`" = ""; then
       CPP="$CPP -DNO_UNDERLINE"
       echo Checking for underline in external names... No.
     else
       echo Checking for underline in external names... Yes.
-    fi;;
+    fi ;;
 esac
 
 rm -f $test.[co] $test $test$shared_ext
@@ -427,19 +549,48 @@ rm -f $test.[co] $test $test$shared_ext
 sed < Makefile.in "
 /^CC *=/s#=.*#=$CC#
 /^CFLAGS *=/s#=.*#=$CFLAGS#
-/^CPP *=/s#=.*#=$CPP#
+/^SFLAGS *=/s#=.*#=$SFLAGS#
+/^LDFLAGS *=/s#=.*#=$LDFLAGS#
 /^LDSHARED *=/s#=.*#=$LDSHARED#
-/^LIBS *=/s#=.*#=$LIBS#
+/^CPP *=/s#=.*#=$CPP#
+/^STATICLIB *=/s#=.*#=$STATICLIB#
 /^SHAREDLIB *=/s#=.*#=$SHAREDLIB#
 /^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV#
 /^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM#
-/^AR *=/s#=.*#=$AR#
+/^AR *=/s#=.*#=$AR_RC#
+/^RANLIB *=/s#=.*#=$RANLIB#
+/^LDCONFIG *=/s#=.*#=$LDCONFIG#
+/^LDSHAREDLIBC *=/s#=.*#=$LDSHAREDLIBC#
+/^EXE *=/s#=.*#=$EXE#
+/^prefix *=/s#=.*#=$prefix#
+/^exec_prefix *=/s#=.*#=$exec_prefix#
+/^libdir *=/s#=.*#=$libdir#
+/^sharedlibdir *=/s#=.*#=$sharedlibdir#
+/^includedir *=/s#=.*#=$includedir#
+/^mandir *=/s#=.*#=$mandir#
+/^all: */s#:.*#: $ALL#
+/^test: */s#:.*#: $TEST#
+" > Makefile
+
+sed < zlib.pc.in "
+/^CC *=/s#=.*#=$CC#
+/^CFLAGS *=/s#=.*#=$CFLAGS#
+/^CPP *=/s#=.*#=$CPP#
+/^LDSHARED *=/s#=.*#=$LDSHARED#
+/^STATICLIB *=/s#=.*#=$STATICLIB#
+/^SHAREDLIB *=/s#=.*#=$SHAREDLIB#
+/^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV#
+/^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM#
+/^AR *=/s#=.*#=$AR_RC#
 /^RANLIB *=/s#=.*#=$RANLIB#
 /^EXE *=/s#=.*#=$EXE#
 /^prefix *=/s#=.*#=$prefix#
 /^exec_prefix *=/s#=.*#=$exec_prefix#
 /^libdir *=/s#=.*#=$libdir#
+/^sharedlibdir *=/s#=.*#=$sharedlibdir#
 /^includedir *=/s#=.*#=$includedir#
 /^mandir *=/s#=.*#=$mandir#
 /^LDFLAGS *=/s#=.*#=$LDFLAGS#
-" > Makefile
+" | sed -e "
+s/\@VERSION\@/$VER/g;
+" > zlib.pc

contrib/README.contrib

@@ -8,7 +8,10 @@ ada/        by Dmitriy Anisimkov <anisimkov@yahoo.com>
         Support for Ada
         See http://zlib-ada.sourceforge.net/
 
-asm586/
+amd64/      by Mikhail Teterin <mi@ALDAN.algebra.com>
+        asm code for AMD64
+        See patch at http://www.freebsd.org/cgi/query-pr.cgi?pr=bin/96393
+
 asm686/     by Brian Raiter <breadbox@muppetlabs.com>
         asm code for Pentium and PPro/PII, using the AT&T (GNU as) syntax
         See http://www.muppetlabs.com/~breadbox/software/assembly.html
@@ -19,8 +22,12 @@ blast/      by Mark Adler <madler@alumni.caltech.edu>
 delphi/     by Cosmin Truta <cosmint@cs.ubbcluj.ro>
         Support for Delphi and C++ Builder
 
-gzappend/   by Mark Adler <madler@alumni.caltech.edu>
+dotzlib/    by Henrik Ravn <henrik@ravn.com>
-        append to a gzip file -- illustrates the use of Z_BLOCK
+        Support for Microsoft .Net and Visual C++ .Net
+
+gcc_gvmat64/by Gilles Vollant <info@winimage.com>
+        GCC Version of x86 64-bit (AMD64 and Intel EM64t) code for x64
+        assembler to replace longest_match() and inflate_fast()
 
 infback9/   by Mark Adler <madler@alumni.caltech.edu>
         Unsupported diffs to infback to decode the deflate64 format
@@ -38,16 +45,19 @@ iostream3/  by Ludwig Schwardt <schwardt@sun.ac.za>
             and Kevin Ruland <kevin@rodin.wustl.edu>
         Yet another C++ I/O streams interface
 
-masm686/    by Dan Higdon <hdan@kinesoft.com>
+masmx64/    by Gilles Vollant <info@winimage.com>
-            and Chuck Walbourn <chuckw@kinesoft.com>
+        x86 64-bit (AMD64 and Intel EM64t) code for x64 assembler to
-        asm code for Pentium Pro/PII, using the MASM syntax
+        replace longest_match() and inflate_fast(),  also masm x86
+        64-bits translation of Chris Anderson inflate_fast()
 
 masmx86/    by Gilles Vollant <info@winimage.com>
         x86 asm code to replace longest_match() and inflate_fast(),
-        for Visual C++ and MASM
+        for Visual C++ and MASM (32 bits).
+        Based on Brian Raiter (asm686) and Chris Anderson (inflate86)
 
 minizip/    by Gilles Vollant <info@winimage.com>
         Mini zip and unzip based on zlib
+        Includes Zip64 support by Mathias Svensson <mathias@result42.com>
         See http://www.winimage.com/zLibDll/unzip.html
 
 pascal/     by Bob Dellaca <bobdl@xtra.co.nz> et al.
@@ -60,11 +70,8 @@ puff/       by Mark Adler <madler@alumni.caltech.edu>
 testzlib/   by Gilles Vollant <info@winimage.com>
         Example of the use of zlib
 
-untgz/      by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+untgz/      by Pedro A. Aranda Gutierrez <paag@tid.es>
         A very simple tar.gz file extractor using zlib
 
-visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
-        How to use compress(), uncompress() and the gz* functions from VB
-
 vstudio/    by Gilles Vollant <info@winimage.com>
-        Building zlib with Visual Studio .NET
+        Building a minizip-enhanced zlib with Microsoft Visual Studio

contrib/ada/buffer_demo.adb

@@ -0,0 +1,106 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2004 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+--
+--  $Id: buffer_demo.adb,v 1.3 2004/09/06 06:55:35 vagul Exp $
+
+--  This demo program provided by Dr Steve Sangwine <sjs@essex.ac.uk>
+--
+--  Demonstration of a problem with Zlib-Ada (already fixed) when a buffer
+--  of exactly the correct size is used for decompressed data, and the last
+--  few bytes passed in to Zlib are checksum bytes.
+
+--  This program compresses a string of text, and then decompresses the
+--  compressed text into a buffer of the same size as the original text.
+
+with Ada.Streams; use Ada.Streams;
+with Ada.Text_IO;
+
+with ZLib; use ZLib;
+
+procedure Buffer_Demo is
+   EOL  : Character renames ASCII.LF;
+   Text : constant String
+     := "Four score and seven years ago our fathers brought forth," & EOL &
+        "upon this continent, a new nation, conceived in liberty," & EOL &
+        "and dedicated to the proposition that `all men are created equal'.";
+
+   Source : Stream_Element_Array (1 .. Text'Length);
+   for Source'Address use Text'Address;
+
+begin
+   Ada.Text_IO.Put (Text);
+   Ada.Text_IO.New_Line;
+   Ada.Text_IO.Put_Line
+     ("Uncompressed size : " & Positive'Image (Text'Length) & " bytes");
+
+   declare
+      Compressed_Data : Stream_Element_Array (1 .. Text'Length);
+      L               : Stream_Element_Offset;
+   begin
+      Compress : declare
+         Compressor : Filter_Type;
+         I : Stream_Element_Offset;
+      begin
+         Deflate_Init (Compressor);
+
+         --  Compress the whole of T at once.
+
+         Translate (Compressor, Source, I, Compressed_Data, L, Finish);
+         pragma Assert (I = Source'Last);
+
+         Close (Compressor);
+
+         Ada.Text_IO.Put_Line
+           ("Compressed size :   "
+            & Stream_Element_Offset'Image (L) & " bytes");
+      end Compress;
+
+      --  Now we decompress the data, passing short blocks of data to Zlib
+      --  (because this demonstrates the problem - the last block passed will
+      --  contain checksum information and there will be no output, only a
+      --  check inside Zlib that the checksum is correct).
+
+      Decompress : declare
+         Decompressor : Filter_Type;
+
+         Uncompressed_Data : Stream_Element_Array (1 .. Text'Length);
+
+         Block_Size : constant := 4;
+         --  This makes sure that the last block contains
+         --  only Adler checksum data.
+
+         P : Stream_Element_Offset := Compressed_Data'First - 1;
+         O : Stream_Element_Offset;
+      begin
+         Inflate_Init (Decompressor);
+
+         loop
+            Translate
+              (Decompressor,
+               Compressed_Data
+                 (P + 1 .. Stream_Element_Offset'Min (P + Block_Size, L)),
+               P,
+               Uncompressed_Data
+                 (Total_Out (Decompressor) + 1 .. Uncompressed_Data'Last),
+               O,
+               No_Flush);
+
+               Ada.Text_IO.Put_Line
+                 ("Total in : " & Count'Image (Total_In (Decompressor)) &
+                  ", out : " & Count'Image (Total_Out (Decompressor)));
+
+               exit when P = L;
+         end loop;
+
+         Ada.Text_IO.New_Line;
+         Ada.Text_IO.Put_Line
+           ("Decompressed text matches original text : "
+             & Boolean'Image (Uncompressed_Data = Source));
+      end Decompress;
+   end;
+end Buffer_Demo;

contrib/ada/mtest.adb

@@ -5,10 +5,10 @@
 --                                                            --
 --  Open source license information is in the zlib.ads file.  --
 ----------------------------------------------------------------
---  Continuous test for ZLib multithreading. If the test is fail
+--  Continuous test for ZLib multithreading. If the test would fail
---  Wou should provide thread safe allocation routines for the Z_Stream.
+--  we should provide thread safe allocation routines for the Z_Stream.
 --
---  $Id: mtest.adb,v 1.2 2003/08/12 12:11:05 vagul Exp $
+--  $Id: mtest.adb,v 1.4 2004/07/23 07:49:54 vagul Exp $
 
 with ZLib;
 with Ada.Streams;
@@ -148,6 +148,9 @@ procedure MTest is
 
    pragma Unreferenced (Test);
 
+   Dummy : Character;
+
 begin
-   null;
+   Ada.Text_IO.Get_Immediate (Dummy);
+   Stop := True;
 end MTest;

contrib/ada/read.adb

@@ -6,7 +6,7 @@
 --  Open source license information is in the zlib.ads file.  --
 ----------------------------------------------------------------
 
---  $Id: read.adb,v 1.7 2003/08/12 12:12:35 vagul Exp $
+--  $Id: read.adb,v 1.8 2004/05/31 10:53:40 vagul Exp $
 
 --  Test/demo program for the generic read interface.
 
@@ -68,7 +68,11 @@ procedure Read is
    --  ZLib.Read
    --  reading data from the File_In.
 
-   procedure Read is new ZLib.Read (Read, Read_Buffer, Read_First, Read_Last);
+   procedure Read is new ZLib.Read
+                           (Read,
+                            Read_Buffer,
+                            Rest_First => Read_First,
+                            Rest_Last  => Read_Last);
 
    ----------
    -- Read --
@@ -103,6 +107,7 @@ procedure Read is
       Pack_Size := 0;
       Offset := 1;
       Read_First := Read_Buffer'Last + 1;
+      Read_Last  := Read_Buffer'Last;
    end Reset;
 
 begin

contrib/ada/readme.txt

@@ -1,23 +1,34 @@
-
+                        ZLib for Ada thick binding (ZLib.Ada)
-			ZLib for Ada thick binding (ZLib.Ada)
+                        Release 1.3
-			Release 1.2
 
 ZLib.Ada is a thick binding interface to the popular ZLib data
 compression library, available at http://www.gzip.org/zlib/.
 It provides Ada-style access to the ZLib C library.
 
 
-	Here are the main changes since ZLib.Ada 1.1:
+        Here are the main changes since ZLib.Ada 1.2:
 
-- The default header type has a name "Default" now. Auto is used only for
+- Attension: ZLib.Read generic routine have a initialization requirement
-  automatic GZip/ZLib header detection.
+  for Read_Last parameter now. It is a bit incompartible with previous version,
+  but extends functionality, we could use new parameters Allow_Read_Some and
+  Flush now.
 
-- Added test for multitasking mtest.adb.
+- Added Is_Open routines to ZLib and ZLib.Streams packages.
 
-- Added GNAT project file zlib.gpr.
+- Add pragma Assert to check Stream_Element is 8 bit.
+
+- Fix extraction to buffer with exact known decompressed size. Error reported by
+  Steve Sangwine.
+
+- Fix definition of ULong (changed to unsigned_long), fix regression on 64 bits
+  computers. Patch provided by Pascal Obry.
+
+- Add Status_Error exception definition.
+
+- Add pragma Assertion that Ada.Streams.Stream_Element size is 8 bit.
 
 
-	How to build ZLib.Ada under GNAT
+        How to build ZLib.Ada under GNAT
 
 You should have the ZLib library already build on your computer, before
 building ZLib.Ada. Make the directory of ZLib.Ada sources current and
@@ -30,7 +41,7 @@ Or use the GNAT project file build for GNAT 3.15 or later:
   gnatmake -Pzlib.gpr -L<directory where libz.a is>
 
 
-	How to build ZLib.Ada under Aonix ObjectAda for Win32 7.2.2
+        How to build ZLib.Ada under Aonix ObjectAda for Win32 7.2.2
 
 1. Make a project with all *.ads and *.adb files from the distribution.
 2. Build the libz.a library from the ZLib C sources.
@@ -40,7 +51,7 @@ Or use the GNAT project file build for GNAT 3.15 or later:
 6. Build the executable using test.adb as a main procedure.
 
 
-	How to use ZLib.Ada
+        How to use ZLib.Ada
 
 The source files test.adb and read.adb are small demo programs that show
 the main functionality of ZLib.Ada.
@@ -50,3 +61,5 @@ The routines from the package specifications are commented.
 
 Homepage: http://zlib-ada.sourceforge.net/
 Author: Dmitriy Anisimkov <anisimkov@yahoo.com>
+
+Contributors: Pascal Obry <pascal@obry.org>, Steve Sangwine <sjs@essex.ac.uk>

contrib/ada/zlib-streams.adb

@@ -6,7 +6,7 @@
 --  Open source license information is in the zlib.ads file.  --
 ----------------------------------------------------------------
 
---  $Id: zlib-streams.adb,v 1.9 2003/08/12 13:15:31 vagul Exp $
+--  $Id: zlib-streams.adb,v 1.10 2004/05/31 10:53:40 vagul Exp $
 
 with Ada.Unchecked_Deallocation;
 
@@ -90,6 +90,7 @@ package body ZLib.Streams is
 
          Stream.Buffer     := new Buffer_Subtype;
          Stream.Rest_First := Stream.Buffer'Last + 1;
+         Stream.Rest_Last  := Stream.Buffer'Last;
       end if;
    end Create;
 
@@ -113,6 +114,15 @@ package body ZLib.Streams is
       end loop;
    end Flush;
 
+   -------------
+   -- Is_Open --
+   -------------
+
+   function Is_Open (Stream : Stream_Type) return Boolean is
+   begin
+      return Is_Open (Stream.Reader) or else Is_Open (Stream.Writer);
+   end Is_Open;
+
    ----------
    -- Read --
    ----------

contrib/ada/zlib-streams.ads

@@ -6,7 +6,7 @@
 --  Open source license information is in the zlib.ads file.  --
 ----------------------------------------------------------------
 
---  $Id: zlib-streams.ads,v 1.11 2003/08/12 13:15:31 vagul Exp $
+--  $Id: zlib-streams.ads,v 1.12 2004/05/31 10:53:40 vagul Exp $
 
 package ZLib.Streams is
 
@@ -77,6 +77,8 @@ package ZLib.Streams is
    --  !!! When the Need_Header is False ZLib-Ada is using undocumented
    --  ZLib 1.1.4 functionality to do not create/wait for ZLib headers.
 
+   function Is_Open (Stream : Stream_Type) return Boolean;
+
    procedure Close (Stream : in out Stream_Type);
 
 private

contrib/ada/zlib-thin.adb

@@ -6,12 +6,11 @@
 --  Open source license information is in the zlib.ads file.  --
 ----------------------------------------------------------------
 
---  $Id: zlib-thin.adb,v 1.6 2003/01/21 15:26:37 vagul Exp $
+--  $Id: zlib-thin.adb,v 1.8 2003/12/14 18:27:31 vagul Exp $
 
 package body ZLib.Thin is
 
-   ZLIB_VERSION : constant Chars_Ptr :=
+   ZLIB_VERSION  : constant Chars_Ptr := zlibVersion;
-      Interfaces.C.Strings.New_String ("1.1.4");
 
    Z_Stream_Size : constant Int := Z_Stream'Size / System.Storage_Unit;
 
@@ -37,14 +36,6 @@ package body ZLib.Thin is
    -- Deflate_Init --
    ------------------
 
-   function Deflate_Init
-     (strm  : in Z_Streamp;
-      level : in Int := Z_DEFAULT_COMPRESSION)
-      return  Int is
-   begin
-      return deflateInit (strm, level, ZLIB_VERSION, Z_Stream_Size);
-   end Deflate_Init;
-
    function Deflate_Init
      (strm       : Z_Streamp;
       level      : Int;
@@ -69,16 +60,15 @@ package body ZLib.Thin is
    -- Inflate_Init --
    ------------------
 
-   function Inflate_Init (strm : Z_Streamp) return Int is
-   begin
-      return inflateInit (strm, ZLIB_VERSION, Z_Stream_Size);
-   end Inflate_Init;
-
    function Inflate_Init (strm : Z_Streamp; windowBits : Int) return Int is
    begin
       return inflateInit2 (strm, windowBits, ZLIB_VERSION, Z_Stream_Size);
    end Inflate_Init;
 
+   ------------------------
+   -- Last_Error_Message --
+   ------------------------
+
    function Last_Error_Message (Strm : in Z_Stream) return String is
       use Interfaces.C.Strings;
    begin
@@ -89,54 +79,28 @@ package body ZLib.Thin is
       end if;
    end Last_Error_Message;
 
-   -------------
-   -- Need_In --
-   -------------
-
-   function Need_In (strm : Z_Stream) return Boolean is
-   begin
-      return strm.Avail_In = 0;
-   end Need_In;
-
-   --------------
-   -- Need_Out --
-   --------------
-
-   function Need_Out (strm : Z_Stream) return Boolean is
-   begin
-      return strm.Avail_Out = 0;
-   end Need_Out;
-
    ------------
    -- Set_In --
    ------------
 
    procedure Set_In
      (Strm   : in out Z_Stream;
-      Buffer : in Byte_Access;
+      Buffer : in     Voidp;
-      Size   : in UInt) is
+      Size   : in     UInt) is
    begin
       Strm.Next_In  := Buffer;
       Strm.Avail_In := Size;
    end Set_In;
 
-   procedure Set_In
-     (Strm   : in out Z_Stream;
-      Buffer : in Voidp;
-      Size   : in UInt) is
-   begin
-      Set_In (Strm, Bytes.To_Pointer (Buffer), Size);
-   end Set_In;
-
    ------------------
    -- Set_Mem_Func --
    ------------------
 
    procedure Set_Mem_Func
      (Strm   : in out Z_Stream;
-      Opaque : in Voidp;
+      Opaque : in     Voidp;
-      Alloc  : in alloc_func;
+      Alloc  : in     alloc_func;
-      Free   : in free_func) is
+      Free   : in     free_func) is
    begin
       Strm.opaque := Opaque;
       Strm.zalloc := Alloc;
@@ -149,21 +113,13 @@ package body ZLib.Thin is
 
    procedure Set_Out
      (Strm   : in out Z_Stream;
-      Buffer : in Byte_Access;
+      Buffer : in     Voidp;
-      Size   : in UInt) is
+      Size   : in     UInt) is
    begin
       Strm.Next_Out  := Buffer;
       Strm.Avail_Out := Size;
    end Set_Out;
 
-   procedure Set_Out
-     (Strm   : in out Z_Stream;
-      Buffer : in Voidp;
-      Size   : in UInt) is
-   begin
-      Set_Out (Strm, Bytes.To_Pointer (Buffer), Size);
-   end Set_Out;
-
    --------------
    -- Total_In --
    --------------

contrib/ada/zlib-thin.ads

@@ -6,10 +6,11 @@
 --  Open source license information is in the zlib.ads file.  --
 ----------------------------------------------------------------
 
---  $Id: zlib-thin.ads,v 1.8 2003/08/12 13:16:51 vagul Exp $
+--  $Id: zlib-thin.ads,v 1.11 2004/07/23 06:33:11 vagul Exp $
 
 with Interfaces.C.Strings;
-with System.Address_To_Access_Conversions;
+
+with System;
 
 private package ZLib.Thin is
 
@@ -36,18 +37,18 @@ private package ZLib.Thin is
                                                 --  zconf.h:216
    type Int is new Interfaces.C.int;
 
-   type ULong is new Interfaces.C.unsigned;     --  32 bits or more
+   type ULong is new Interfaces.C.unsigned_long;     --  32 bits or more
-                                                --  zconf.h:217
+                                                     --  zconf.h:217
    subtype Chars_Ptr is Interfaces.C.Strings.chars_ptr;
 
    type ULong_Access is access ULong;
    type Int_Access is access Int;
+
    subtype Voidp is System.Address;            --  zconf.h:232
 
-   package Bytes is new System.Address_To_Access_Conversions (Byte);
+   subtype Byte_Access is Voidp;
-
-   subtype Byte_Access is Bytes.Object_Pointer;
 
+   Nul : constant Voidp := System.Null_Address;
    --  end from zconf
 
    Z_NO_FLUSH : constant := 8#0000#;   --  zlib.h:125
@@ -251,12 +252,6 @@ private package ZLib.Thin is
       stream_size : Int)
       return        Int;
 
-   function Deflate_Init
-     (strm  : in Z_Streamp;
-      level : in Int := Z_DEFAULT_COMPRESSION)
-      return  Int;
-   pragma Inline (Deflate_Init);
-
    function deflateInit2
      (strm        : Z_Streamp;
       level       : Int;
@@ -284,9 +279,6 @@ private package ZLib.Thin is
       stream_size : Int)
       return        Int;
 
-   function Inflate_Init (strm : Z_Streamp) return Int;
-   pragma Inline (Inflate_Init);
-
    function inflateInit2
      (strm        : in Z_Streamp;
       windowBits  : in Int;
@@ -318,32 +310,12 @@ private package ZLib.Thin is
    --  has dropped to zero. The application must initialize zalloc, zfree and
    --  opaque before calling the init function.
 
-   function Need_In (strm : in Z_Stream) return Boolean;
-   --  return true when we do not need to setup Next_In and Avail_In fields.
-   pragma Inline (Need_In);
-
-   function Need_Out (strm : in Z_Stream) return Boolean;
-   --  return true when we do not need to setup Next_Out and Avail_Out field.
-   pragma Inline (Need_Out);
-
-   procedure Set_In
-     (Strm   : in out Z_Stream;
-      Buffer : in Byte_Access;
-      Size   : in UInt);
-   pragma Inline (Set_In);
-
    procedure Set_In
      (Strm   : in out Z_Stream;
       Buffer : in Voidp;
       Size   : in UInt);
    pragma Inline (Set_In);
 
-   procedure Set_Out
-     (Strm   : in out Z_Stream;
-      Buffer : in Byte_Access;
-      Size   : in UInt);
-   pragma Inline (Set_Out);
-
    procedure Set_Out
      (Strm   : in out Z_Stream;
       Buffer : in Voidp;
@@ -388,19 +360,13 @@ private package ZLib.Thin is
 
    function zlibCompileFlags return ULong;
 
-   function deflatePrime
-     (strm     : Z_Streamp;
-      bits     : Int;
-      value    : Int)
-      return     Int;
-
 private
 
    type Z_Stream is record            -- zlib.h:68
-      Next_In   : Byte_Access;        -- next input byte
+      Next_In   : Voidp      := Nul;  -- next input byte
       Avail_In  : UInt       := 0;    -- number of bytes available at next_in
       Total_In  : ULong      := 0;    -- total nb of input bytes read so far
-      Next_Out  : Byte_Access;        -- next output byte should be put there
+      Next_Out  : Voidp      := Nul;  -- next output byte should be put there
       Avail_Out : UInt       := 0;    -- remaining free space at next_out
       Total_Out : ULong      := 0;    -- total nb of bytes output so far
       msg       : Chars_Ptr;          -- last error message, NULL if no error
@@ -460,14 +426,13 @@ private
    pragma Import (C, inflateSyncPoint, "inflateSyncPoint");
    pragma Import (C, get_crc_table, "get_crc_table");
 
-   --  added in zlib 1.2.1:
+   --  since zlib 1.2.0:
 
    pragma Import (C, inflateCopy, "inflateCopy");
    pragma Import (C, compressBound, "compressBound");
    pragma Import (C, deflateBound, "deflateBound");
    pragma Import (C, gzungetc, "gzungetc");
    pragma Import (C, zlibCompileFlags, "zlibCompileFlags");
-   pragma Import (C, deflatePrime, "deflatePrime");
 
    pragma Import (C, inflateBackInit, "inflateBackInit_");
 

contrib/ada/zlib.adb

@@ -1,12 +1,12 @@
 ----------------------------------------------------------------
 --  ZLib for Ada thick binding.                               --
 --                                                            --
---  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
+--  Copyright (C) 2002-2004 Dmitriy Anisimkov                 --
 --                                                            --
 --  Open source license information is in the zlib.ads file.  --
 ----------------------------------------------------------------
 
---  $Id: zlib.adb,v 1.19 2003/07/13 16:02:19 vagul Exp $
+--  $Id: zlib.adb,v 1.31 2004/09/06 06:53:19 vagul Exp $
 
 with Ada.Exceptions;
 with Ada.Unchecked_Conversion;
@@ -34,7 +34,7 @@ package body ZLib is
        VERSION_ERROR);
 
    type Flate_Step_Function is access
-     function (Strm : Thin.Z_Streamp; flush : Thin.Int) return Thin.Int;
+     function (Strm : in Thin.Z_Streamp; Flush : in Thin.Int) return Thin.Int;
    pragma Convention (C, Flate_Step_Function);
 
    type Flate_End_Function is access
@@ -82,13 +82,13 @@ package body ZLib is
    Flush_Finish : constant array (Boolean) of Flush_Mode
      := (True => Finish, False => No_Flush);
 
-   procedure Raise_Error (Stream : Z_Stream);
+   procedure Raise_Error (Stream : in Z_Stream);
    pragma Inline (Raise_Error);
 
-   procedure Raise_Error (Message : String);
+   procedure Raise_Error (Message : in String);
    pragma Inline (Raise_Error);
 
-   procedure Check_Error (Stream : Z_Stream; Code : Thin.Int);
+   procedure Check_Error (Stream : in Z_Stream; Code : in Thin.Int);
 
    procedure Free is new Ada.Unchecked_Deallocation
       (Z_Stream, Z_Stream_Access);
@@ -118,7 +118,7 @@ package body ZLib is
    -- Check_Error --
    -----------------
 
-   procedure Check_Error (Stream : Z_Stream; Code : Thin.Int) is
+   procedure Check_Error (Stream : in Z_Stream; Code : in Thin.Int) is
       use type Thin.Int;
    begin
       if Code /= Thin.Z_OK then
@@ -138,10 +138,11 @@ package body ZLib is
    is
       Code : Thin.Int;
    begin
-      Code := Flate (Filter.Compression).Done
+      if not Ignore_Error and then not Is_Open (Filter) then
-          (To_Thin_Access (Filter.Strm));
+         raise Status_Error;
+      end if;
 
-      Filter.Opened := False;
+      Code := Flate (Filter.Compression).Done (To_Thin_Access (Filter.Strm));
 
       if Ignore_Error or else Code = Thin.Z_OK then
          Free (Filter.Strm);
@@ -154,7 +155,7 @@ package body ZLib is
             Ada.Exceptions.Raise_Exception
                (ZLib_Error'Identity,
                 Return_Code_Enum'Image (Return_Code (Code))
-                & ": " & Error_Message);
+                  & ": " & Error_Message);
          end;
       end if;
    end Close;
@@ -170,10 +171,9 @@ package body ZLib is
    is
       use Thin;
    begin
-      return Unsigned_32 (crc32
+      return Unsigned_32 (crc32 (ULong (CRC),
-        (ULong (CRC),
+                                 Data'Address,
-         Bytes.To_Pointer (Data'Address),
+                                 Data'Length));
-         Data'Length));
    end CRC32;
 
    procedure CRC32
@@ -192,13 +192,17 @@ package body ZLib is
       Level        : in     Compression_Level  := Default_Compression;
       Strategy     : in     Strategy_Type      := Default_Strategy;
       Method       : in     Compression_Method := Deflated;
-      Window_Bits  : in     Window_Bits_Type   := 15;
+      Window_Bits  : in     Window_Bits_Type   := Default_Window_Bits;
-      Memory_Level : in     Memory_Level_Type  := 8;
+      Memory_Level : in     Memory_Level_Type  := Default_Memory_Level;
       Header       : in     Header_Type        := Default)
    is
       use type Thin.Int;
       Win_Bits : Thin.Int := Thin.Int (Window_Bits);
    begin
+      if Is_Open (Filter) then
+         raise Status_Error;
+      end if;
+
       --  We allow ZLib to make header only in case of default header type.
       --  Otherwise we would either do header by ourselfs, or do not do
       --  header at all.
@@ -216,10 +220,9 @@ package body ZLib is
          Filter.Offset := Simple_GZip_Header'Last + 1;
       end if;
 
-      Filter.Strm := new Z_Stream;
+      Filter.Strm        := new Z_Stream;
       Filter.Compression := True;
       Filter.Stream_End  := False;
-      Filter.Opened      := True;
       Filter.Header      := Header;
 
       if Thin.Deflate_Init
@@ -255,18 +258,18 @@ package body ZLib is
    -----------------------
 
    procedure Generic_Translate
-     (Filter : in out ZLib.Filter_Type;
+     (Filter          : in out ZLib.Filter_Type;
-      In_Buffer_Size  : Integer := Default_Buffer_Size;
+      In_Buffer_Size  : in     Integer := Default_Buffer_Size;
-      Out_Buffer_Size : Integer := Default_Buffer_Size)
+      Out_Buffer_Size : in     Integer := Default_Buffer_Size)
    is
-      In_Buffer : Stream_Element_Array
+      In_Buffer  : Stream_Element_Array
-         (1 .. Stream_Element_Offset (In_Buffer_Size));
+                     (1 .. Stream_Element_Offset (In_Buffer_Size));
       Out_Buffer : Stream_Element_Array
-        (1 .. Stream_Element_Offset (Out_Buffer_Size));
+                     (1 .. Stream_Element_Offset (Out_Buffer_Size));
-      Last : Stream_Element_Offset;
+      Last       : Stream_Element_Offset;
-      In_Last : Stream_Element_Offset;
+      In_Last    : Stream_Element_Offset;
-      In_First : Stream_Element_Offset;
+      In_First   : Stream_Element_Offset;
-      Out_Last : Stream_Element_Offset;
+      Out_Last   : Stream_Element_Offset;
    begin
       Main : loop
          Data_In (In_Buffer, Last);
@@ -275,18 +278,21 @@ package body ZLib is
 
          loop
             Translate
-              (Filter,
+              (Filter   => Filter,
-               In_Buffer (In_First .. Last),
+               In_Data  => In_Buffer (In_First .. Last),
-               In_Last,
+               In_Last  => In_Last,
-               Out_Buffer,
+               Out_Data => Out_Buffer,
-               Out_Last,
+               Out_Last => Out_Last,
-               Flush_Finish (Last < In_Buffer'First));
+               Flush    => Flush_Finish (Last < In_Buffer'First));
 
-            Data_Out (Out_Buffer (Out_Buffer'First .. Out_Last));
+            if Out_Buffer'First <= Out_Last then
+               Data_Out (Out_Buffer (Out_Buffer'First .. Out_Last));
+            end if;
 
             exit Main when Stream_End (Filter);
 
             --  The end of in buffer.
+
             exit when In_Last = Last;
 
             In_First := In_Last + 1;
@@ -301,7 +307,7 @@ package body ZLib is
 
    procedure Inflate_Init
      (Filter      : in out Filter_Type;
-      Window_Bits : in     Window_Bits_Type := 15;
+      Window_Bits : in     Window_Bits_Type := Default_Window_Bits;
       Header      : in     Header_Type      := Default)
    is
       use type Thin.Int;
@@ -320,6 +326,10 @@ package body ZLib is
       end Check_Version;
 
    begin
+      if Is_Open (Filter) then
+         raise Status_Error;
+      end if;
+
       case Header is
          when None =>
             Check_Version;
@@ -344,10 +354,9 @@ package body ZLib is
          when Default => null;
       end case;
 
-      Filter.Strm := new Z_Stream;
+      Filter.Strm        := new Z_Stream;
       Filter.Compression := False;
       Filter.Stream_End  := False;
-      Filter.Opened      := True;
       Filter.Header      := Header;
 
       if Thin.Inflate_Init
@@ -357,16 +366,25 @@ package body ZLib is
       end if;
    end Inflate_Init;
 
+   -------------
+   -- Is_Open --
+   -------------
+
+   function Is_Open (Filter : in Filter_Type) return Boolean is
+   begin
+      return Filter.Strm /= null;
+   end Is_Open;
+
    -----------------
    -- Raise_Error --
    -----------------
 
-   procedure Raise_Error (Message : String) is
+   procedure Raise_Error (Message : in String) is
    begin
       Ada.Exceptions.Raise_Exception (ZLib_Error'Identity, Message);
    end Raise_Error;
 
-   procedure Raise_Error (Stream : Z_Stream) is
+   procedure Raise_Error (Stream : in Z_Stream) is
    begin
       Raise_Error (Last_Error_Message (Stream));
    end Raise_Error;
@@ -378,21 +396,29 @@ package body ZLib is
    procedure Read
      (Filter : in out Filter_Type;
       Item   :    out Ada.Streams.Stream_Element_Array;
-      Last   :    out Ada.Streams.Stream_Element_Offset)
+      Last   :    out Ada.Streams.Stream_Element_Offset;
+      Flush  : in     Flush_Mode := No_Flush)
    is
       In_Last    : Stream_Element_Offset;
       Item_First : Ada.Streams.Stream_Element_Offset := Item'First;
+      V_Flush    : Flush_Mode := Flush;
 
    begin
       pragma Assert (Rest_First in Buffer'First .. Buffer'Last + 1);
+      pragma Assert (Rest_Last in Buffer'First - 1 .. Buffer'Last);
 
       loop
-         if Rest_First > Buffer'Last then
+         if Rest_Last = Buffer'First - 1 then
+            V_Flush := Finish;
+
+         elsif Rest_First > Rest_Last then
             Read (Buffer, Rest_Last);
             Rest_First := Buffer'First;
-         end if;
 
-         pragma Assert (Rest_Last in Buffer'First - 1 .. Buffer'Last);
+            if Rest_Last < Buffer'First then
+               V_Flush := Finish;
+            end if;
+         end if;
 
          Translate
            (Filter   => Filter,
@@ -400,11 +426,13 @@ package body ZLib is
             In_Last  => In_Last,
             Out_Data => Item (Item_First .. Item'Last),
             Out_Last => Last,
-            Flush    => Flush_Finish (Rest_Last < Rest_First));
+            Flush    => V_Flush);
 
          Rest_First := In_Last + 1;
 
-         exit when Last = Item'Last or else Stream_End (Filter);
+         exit when Stream_End (Filter)
+           or else Last = Item'Last
+           or else (Last >= Item'First and then Allow_Read_Some);
 
          Item_First := Last + 1;
       end loop;
@@ -489,11 +517,11 @@ package body ZLib is
       Code : Thin.Int;
 
    begin
-      if Filter.Opened = False then
+      if not Is_Open (Filter) then
-         raise ZLib_Error;
+         raise Status_Error;
       end if;
 
-      if Out_Data'Length = 0 then
+      if Out_Data'Length = 0 and then In_Data'Length = 0 then
          raise Constraint_Error;
       end if;
 
@@ -514,7 +542,6 @@ package body ZLib is
          - Stream_Element_Offset (Avail_In (Filter.Strm.all));
       Out_Last := Out_Data'Last
          - Stream_Element_Offset (Avail_Out (Filter.Strm.all));
-
    end Translate_Auto;
 
    --------------------
@@ -529,7 +556,7 @@ package body ZLib is
       Out_Last  :    out Ada.Streams.Stream_Element_Offset;
       Flush     : in     Flush_Mode)
    is
-      Out_First  : Stream_Element_Offset;
+      Out_First : Stream_Element_Offset;
 
       procedure Add_Data (Data : in Stream_Element_Array);
       --  Add data to stream from the Filter.Offset till necessary,
@@ -596,7 +623,7 @@ package body ZLib is
          Add_Data (Simple_GZip_Header);
 
          Translate_Auto
-           (Filter => Filter,
+           (Filter   => Filter,
             In_Data  => In_Data,
             In_Last  => In_Last,
             Out_Data => Out_Data (Out_First .. Out_Data'Last),
@@ -604,7 +631,6 @@ package body ZLib is
             Flush    => Flush);
 
          CRC32 (Filter.CRC, In_Data (In_Data'First .. In_Last));
-
       end if;
 
       if Filter.Stream_End and then Out_Last <= Out_Data'Last then
@@ -642,10 +668,11 @@ package body ZLib is
    procedure Write
      (Filter : in out Filter_Type;
       Item   : in     Ada.Streams.Stream_Element_Array;
-      Flush  : in     Flush_Mode)
+      Flush  : in     Flush_Mode := No_Flush)
    is
-      Buffer : Stream_Element_Array (1 .. Buffer_Size);
+      Buffer   : Stream_Element_Array (1 .. Buffer_Size);
-      In_Last, Out_Last : Stream_Element_Offset;
+      In_Last  : Stream_Element_Offset;
+      Out_Last : Stream_Element_Offset;
       In_First : Stream_Element_Offset := Item'First;
    begin
       if Item'Length = 0 and Flush = No_Flush then
@@ -654,7 +681,7 @@ package body ZLib is
 
       loop
          Translate
-           (Filter => Filter,
+           (Filter   => Filter,
             In_Data  => Item (In_First .. Item'Last),
             In_Last  => In_Last,
             Out_Data => Buffer,

contrib/ada/zlib.ads

@@ -1,7 +1,7 @@
 ------------------------------------------------------------------------------
 --                      ZLib for Ada thick binding.                         --
 --                                                                          --
---              Copyright (C) 2002-2003 Dmitriy Anisimkov                   --
+--              Copyright (C) 2002-2004 Dmitriy Anisimkov                   --
 --                                                                          --
 --  This library is free software; you can redistribute it and/or modify    --
 --  it under the terms of the GNU General Public License as published by    --
@@ -25,7 +25,7 @@
 --  covered by the  GNU Public License.                                     --
 ------------------------------------------------------------------------------
 
---  $Id: zlib.ads,v 1.17 2003/08/12 13:19:07 vagul Exp $
+--  $Id: zlib.ads,v 1.26 2004/09/06 06:53:19 vagul Exp $
 
 with Ada.Streams;
 
@@ -33,7 +33,8 @@ with Interfaces;
 
 package ZLib is
 
-   ZLib_Error : exception;
+   ZLib_Error   : exception;
+   Status_Error : exception;
 
    type Compression_Level is new Integer range -1 .. 9;
 
@@ -55,12 +56,15 @@ package ZLib is
 
    subtype Count is Ada.Streams.Stream_Element_Count;
 
+   Default_Memory_Level : constant Memory_Level_Type := 8;
+   Default_Window_Bits  : constant Window_Bits_Type  := 15;
+
    ----------------------------------
    -- Compression method constants --
    ----------------------------------
 
    Deflated : constant Compression_Method;
-   --  Only one method allowed in this ZLib version.
+   --  Only one method allowed in this ZLib version
 
    ---------------------------------
    -- Compression level constants --
@@ -79,21 +83,29 @@ package ZLib is
    --  Regular way for compression, no flush
 
    Partial_Flush : constant Flush_Mode;
-   --  will be removed, use Z_SYNC_FLUSH instead
+   --  Will be removed, use Z_SYNC_FLUSH instead
 
    Sync_Flush    : constant Flush_Mode;
-   --  all pending output is flushed to the output buffer and the output
+   --  All pending output is flushed to the output buffer and the output
    --  is aligned on a byte boundary, so that the decompressor can get all
    --  input data available so far. (In particular avail_in is zero after the
    --  call if enough output space has been provided  before the call.)
    --  Flushing may degrade compression for some compression algorithms and so
    --  it should be used only when necessary.
 
+   Block_Flush   : constant Flush_Mode;
+   --  Z_BLOCK requests that inflate() stop
+   --  if and when it get to the next deflate block boundary. When decoding the
+   --  zlib or gzip format, this will cause inflate() to return immediately
+   --  after the header and before the first block. When doing a raw inflate,
+   --  inflate() will go ahead and process the first block, and will return
+   --  when it gets to the end of that block, or when it runs out of data.
+
    Full_Flush    : constant Flush_Mode;
-   --  all output is flushed as with SYNC_FLUSH, and the compression state
+   --  All output is flushed as with SYNC_FLUSH, and the compression state
    --  is reset so that decompression can restart from this point if previous
    --  compressed data has been damaged or if random access is desired. Using
-   --  FULL_FLUSH too often can seriously degrade the compression.
+   --  Full_Flush too often can seriously degrade the compression.
 
    Finish        : constant Flush_Mode;
    --  Just for tell the compressor that input data is complete.
@@ -111,7 +123,7 @@ package ZLib is
 
    Default_Buffer_Size : constant := 4096;
 
-   type Filter_Type is limited private;
+   type Filter_Type is tagged limited private;
    --  The filter is for compression and for decompression.
    --  The usage of the type is depend of its initialization.
 
@@ -124,8 +136,8 @@ package ZLib is
       Level        : in     Compression_Level  := Default_Compression;
       Strategy     : in     Strategy_Type      := Default_Strategy;
       Method       : in     Compression_Method := Deflated;
-      Window_Bits  : in     Window_Bits_Type   := 15;
+      Window_Bits  : in     Window_Bits_Type   := Default_Window_Bits;
-      Memory_Level : in     Memory_Level_Type  := 8;
+      Memory_Level : in     Memory_Level_Type  := Default_Memory_Level;
       Header       : in     Header_Type        := Default);
    --  Compressor initialization.
    --  When Header parameter is Auto or Default, then default zlib header
@@ -136,7 +148,7 @@ package ZLib is
 
    procedure Inflate_Init
      (Filter      : in out Filter_Type;
-      Window_Bits : in     Window_Bits_Type := 15;
+      Window_Bits : in     Window_Bits_Type := Default_Window_Bits;
       Header      : in     Header_Type      := Default);
    --  Decompressor initialization.
    --  Default header type mean that ZLib default header is expecting in the
@@ -146,10 +158,14 @@ package ZLib is
    --  input compressed stream.
    --  Auto header type mean that header type (GZip or Native) would be
    --  detected automatically in the input stream.
-   --  Note that header types parameter values None, GZip and Auto is
+   --  Note that header types parameter values None, GZip and Auto are
-   --  supporting for inflate routine only in ZLib versions 1.2.0.2 and later.
+   --  supported for inflate routine only in ZLib versions 1.2.0.2 and later.
    --  Deflate_Init is supporting all header types.
 
+   function Is_Open (Filter : in Filter_Type) return Boolean;
+   pragma Inline (Is_Open);
+   --  Is the filter opened for compression or decompression.
+
    procedure Close
      (Filter       : in out Filter_Type;
       Ignore_Error : in     Boolean := False);
@@ -167,31 +183,31 @@ package ZLib is
      (Filter          : in out Filter_Type;
       In_Buffer_Size  : in     Integer := Default_Buffer_Size;
       Out_Buffer_Size : in     Integer := Default_Buffer_Size);
-   --  Compressing/decompressing data arrived from Data_In routine
+   --  Compress/decompress data fetch from Data_In routine and pass the result
    --  to the Data_Out routine. User should provide Data_In and Data_Out
    --  for compression/decompression data flow.
-   --  Compression or decompression depend on initialization of Filter.
+   --  Compression or decompression depend on Filter initialization.
 
    function Total_In (Filter : in Filter_Type) return Count;
    pragma Inline (Total_In);
-   --  Return total number of input bytes read so far.
+   --  Returns total number of input bytes read so far
 
    function Total_Out (Filter : in Filter_Type) return Count;
    pragma Inline (Total_Out);
-   --  Return total number of bytes output so far.
+   --  Returns total number of bytes output so far
 
    function CRC32
      (CRC    : in Unsigned_32;
       Data   : in Ada.Streams.Stream_Element_Array)
       return Unsigned_32;
    pragma Inline (CRC32);
-   --  Calculate CRC32, it could be necessary for make gzip format.
+   --  Compute CRC32, it could be necessary for make gzip format
 
    procedure CRC32
      (CRC  : in out Unsigned_32;
       Data : in     Ada.Streams.Stream_Element_Array);
    pragma Inline (CRC32);
-   --  Calculate CRC32, it could be necessary for make gzip format.
+   --  Compute CRC32, it could be necessary for make gzip format
 
    -------------------------------------------------
    --  Below is more complex low level routines.  --
@@ -204,15 +220,11 @@ package ZLib is
       Out_Data  :    out Ada.Streams.Stream_Element_Array;
       Out_Last  :    out Ada.Streams.Stream_Element_Offset;
       Flush     : in     Flush_Mode);
-   --  Compressing/decompressing the datas from In_Data buffer to the
+   --  Compress/decompress the In_Data buffer and place the result into
-   --  Out_Data buffer.
+   --  Out_Data. In_Last is the index of last element from In_Data accepted by
-   --  In_Data is incoming data portion,
+   --  the Filter. Out_Last is the last element of the received data from
-   --  In_Last is the index of last element from In_Data accepted by the
+   --  Filter. To tell the filter that incoming data are complete put the
-   --  Filter.
+   --  Flush parameter to Finish.
-   --  Out_Data is the buffer for output data from the filter.
-   --  Out_Last is the last element of the received data from Filter.
-   --  To tell the filter that incoming data is complete put the
-   --  Flush parameter to FINISH.
 
    function Stream_End (Filter : in Filter_Type) return Boolean;
    pragma Inline (Stream_End);
@@ -239,10 +251,9 @@ package ZLib is
    procedure Write
      (Filter  : in out Filter_Type;
       Item    : in     Ada.Streams.Stream_Element_Array;
-      Flush   : in     Flush_Mode);
+      Flush   : in     Flush_Mode := No_Flush);
-   --  Compressing/Decompressing data from Item to the
+   --  Compress/Decompress data from Item to the generic parameter procedure
-   --  generic parameter procedure Write.
+   --  Write. Output buffer size could be set in Buffer_Size generic parameter.
-   --  Output buffer size could be set in Buffer_Size generic parameter.
 
    generic
       with procedure Read
@@ -257,33 +268,41 @@ package ZLib is
 
       Rest_First, Rest_Last : in out Ada.Streams.Stream_Element_Offset;
       --  Rest_First have to be initialized to Buffer'Last + 1
+      --  Rest_Last have to be initialized to Buffer'Last
       --  before usage.
 
+      Allow_Read_Some : in Boolean := False;
+      --  Is it allowed to return Last < Item'Last before end of data.
+
    procedure Read
      (Filter : in out Filter_Type;
       Item   :    out Ada.Streams.Stream_Element_Array;
-      Last   :    out Ada.Streams.Stream_Element_Offset);
+      Last   :    out Ada.Streams.Stream_Element_Offset;
-   --  Compressing/Decompressing data from generic parameter
+      Flush  : in     Flush_Mode := No_Flush);
-   --  procedure Read to the Item.
+   --  Compress/Decompress data from generic parameter procedure Read to the
-   --  User should provide Buffer for the operation
+   --  Item. User should provide Buffer and initialized Rest_First, Rest_Last
-   --  and Rest_First variable first time initialized to the Buffer'Last + 1.
+   --  indicators. If Allow_Read_Some is True, Read routines could return
+   --  Last < Item'Last only at end of stream.
 
 private
 
    use Ada.Streams;
 
-   type Flush_Mode is new Integer range 0 .. 4;
+   pragma Assert (Ada.Streams.Stream_Element'Size    =    8);
+   pragma Assert (Ada.Streams.Stream_Element'Modulus = 2**8);
+
+   type Flush_Mode is new Integer range 0 .. 5;
 
    type Compression_Method is new Integer range 8 .. 8;
 
    type Strategy_Type is new Integer range 0 .. 3;
 
    No_Flush      : constant Flush_Mode := 0;
+   Partial_Flush : constant Flush_Mode := 1;
    Sync_Flush    : constant Flush_Mode := 2;
    Full_Flush    : constant Flush_Mode := 3;
    Finish        : constant Flush_Mode := 4;
-   Partial_Flush : constant Flush_Mode := 1;
+   Block_Flush   : constant Flush_Mode := 5;
-   --  will be removed, use Z_SYNC_FLUSH instead
 
    Filtered         : constant Strategy_Type := 1;
    Huffman_Only     : constant Strategy_Type := 2;
@@ -296,7 +315,7 @@ private
 
    type Z_Stream_Access is access all Z_Stream;
 
-   type Filter_Type is record
+   type Filter_Type is tagged limited record
       Strm        : Z_Stream_Access;
       Compression : Boolean;
       Stream_End  : Boolean;
@@ -304,8 +323,6 @@ private
       CRC         : Unsigned_32;
       Offset      : Stream_Element_Offset;
       --  Offset for gzip header/footer output.
-
-      Opened      : Boolean := False;
    end record;
 
 end ZLib;

contrib/ada/zlib.gpr

@@ -3,10 +3,10 @@ project Zlib is
    for Languages use ("Ada");
    for Source_Dirs use (".");
    for Object_Dir use ".";
-   for Main use ("test.adb", "mtest.adb", "read.adb");
+   for Main use ("test.adb", "mtest.adb", "read.adb", "buffer_demo");
 
    package Compiler is
-      for Default_Switches ("ada") use ("-gnatwbcfilopru", "-gnatVcdfimorst", "-gnatyabcefhiklmnoprst");
+      for Default_Switches ("ada") use ("-gnatwcfilopru", "-gnatVcdfimorst", "-gnatyabcefhiklmnoprst");
    end Compiler;
 
    package Linker is
@@ -18,4 +18,3 @@ project Zlib is
    end Builder;
 
 end Zlib;
-

contrib/amd64/amd64-match.S

@@ -0,0 +1,452 @@
+/*
+ * match.S -- optimized version of longest_match()
+ * based on the similar work by Gilles Vollant, and Brian Raiter, written 1998
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the BSD License. Use by owners of Che Guevarra
+ * parafernalia is prohibited, where possible, and highly discouraged
+ * elsewhere.
+ */
+
+#ifndef NO_UNDERLINE
+#	define	match_init	_match_init
+#	define	longest_match	_longest_match
+#endif
+
+#define	scanend		ebx
+#define	scanendw	bx
+#define	chainlenwmask	edx /* high word: current chain len low word: s->wmask */
+#define	curmatch	rsi
+#define	curmatchd	esi
+#define	windowbestlen	r8
+#define	scanalign	r9
+#define	scanalignd	r9d
+#define	window		r10
+#define	bestlen		r11
+#define	bestlend	r11d
+#define	scanstart	r12d
+#define	scanstartw	r12w
+#define scan		r13
+#define nicematch	r14d
+#define	limit		r15
+#define	limitd		r15d
+#define prev		rcx
+
+/*
+ * The 258 is a "magic number, not a parameter -- changing it
+ * breaks the hell loose
+ */
+#define	MAX_MATCH	(258)
+#define	MIN_MATCH	(3)
+#define	MIN_LOOKAHEAD	(MAX_MATCH + MIN_MATCH + 1)
+#define	MAX_MATCH_8	((MAX_MATCH + 7) & ~7)
+
+/* stack frame offsets */
+#define	LocalVarsSize	(112)
+#define _chainlenwmask	( 8-LocalVarsSize)(%rsp)
+#define _windowbestlen	(16-LocalVarsSize)(%rsp)
+#define save_r14        (24-LocalVarsSize)(%rsp)
+#define save_rsi        (32-LocalVarsSize)(%rsp)
+#define save_rbx        (40-LocalVarsSize)(%rsp)
+#define save_r12        (56-LocalVarsSize)(%rsp)
+#define save_r13        (64-LocalVarsSize)(%rsp)
+#define save_r15        (80-LocalVarsSize)(%rsp)
+
+
+.globl	match_init, longest_match
+
+/*
+ * On AMD64 the first argument of a function (in our case -- the pointer to
+ * deflate_state structure) is passed in %rdi, hence our offsets below are
+ * all off of that.
+ */
+
+/* you can check the structure offset by running
+
+#include <stdlib.h>
+#include <stdio.h>
+#include "deflate.h"
+
+void print_depl()
+{
+deflate_state ds;
+deflate_state *s=&ds;
+printf("size pointer=%u\n",(int)sizeof(void*));
+
+printf("#define dsWSize         (%3u)(%%rdi)\n",(int)(((char*)&(s->w_size))-((char*)s)));
+printf("#define dsWMask         (%3u)(%%rdi)\n",(int)(((char*)&(s->w_mask))-((char*)s)));
+printf("#define dsWindow        (%3u)(%%rdi)\n",(int)(((char*)&(s->window))-((char*)s)));
+printf("#define dsPrev          (%3u)(%%rdi)\n",(int)(((char*)&(s->prev))-((char*)s)));
+printf("#define dsMatchLen      (%3u)(%%rdi)\n",(int)(((char*)&(s->match_length))-((char*)s)));
+printf("#define dsPrevMatch     (%3u)(%%rdi)\n",(int)(((char*)&(s->prev_match))-((char*)s)));
+printf("#define dsStrStart      (%3u)(%%rdi)\n",(int)(((char*)&(s->strstart))-((char*)s)));
+printf("#define dsMatchStart    (%3u)(%%rdi)\n",(int)(((char*)&(s->match_start))-((char*)s)));
+printf("#define dsLookahead     (%3u)(%%rdi)\n",(int)(((char*)&(s->lookahead))-((char*)s)));
+printf("#define dsPrevLen       (%3u)(%%rdi)\n",(int)(((char*)&(s->prev_length))-((char*)s)));
+printf("#define dsMaxChainLen   (%3u)(%%rdi)\n",(int)(((char*)&(s->max_chain_length))-((char*)s)));
+printf("#define dsGoodMatch     (%3u)(%%rdi)\n",(int)(((char*)&(s->good_match))-((char*)s)));
+printf("#define dsNiceMatch     (%3u)(%%rdi)\n",(int)(((char*)&(s->nice_match))-((char*)s)));
+}
+
+*/
+
+
+/*
+  to compile for XCode 3.2 on MacOSX x86_64
+  - run "gcc -g -c -DXCODE_MAC_X64_STRUCTURE amd64-match.S"
+ */
+
+
+#ifndef CURRENT_LINX_XCODE_MAC_X64_STRUCTURE
+#define dsWSize		( 68)(%rdi)
+#define dsWMask		( 76)(%rdi)
+#define dsWindow	( 80)(%rdi)
+#define dsPrev		( 96)(%rdi)
+#define dsMatchLen	(144)(%rdi)
+#define dsPrevMatch	(148)(%rdi)
+#define dsStrStart	(156)(%rdi)
+#define dsMatchStart	(160)(%rdi)
+#define dsLookahead	(164)(%rdi)
+#define dsPrevLen	(168)(%rdi)
+#define dsMaxChainLen	(172)(%rdi)
+#define dsGoodMatch	(188)(%rdi)
+#define dsNiceMatch	(192)(%rdi)
+
+#else 
+
+#ifndef STRUCT_OFFSET
+#	define STRUCT_OFFSET	(0)
+#endif
+
+
+#define dsWSize		( 56 + STRUCT_OFFSET)(%rdi)
+#define dsWMask		( 64 + STRUCT_OFFSET)(%rdi)
+#define dsWindow	( 72 + STRUCT_OFFSET)(%rdi)
+#define dsPrev		( 88 + STRUCT_OFFSET)(%rdi)
+#define dsMatchLen	(136 + STRUCT_OFFSET)(%rdi)
+#define dsPrevMatch	(140 + STRUCT_OFFSET)(%rdi)
+#define dsStrStart	(148 + STRUCT_OFFSET)(%rdi)
+#define dsMatchStart	(152 + STRUCT_OFFSET)(%rdi)
+#define dsLookahead	(156 + STRUCT_OFFSET)(%rdi)
+#define dsPrevLen	(160 + STRUCT_OFFSET)(%rdi)
+#define dsMaxChainLen	(164 + STRUCT_OFFSET)(%rdi)
+#define dsGoodMatch	(180 + STRUCT_OFFSET)(%rdi)
+#define dsNiceMatch	(184 + STRUCT_OFFSET)(%rdi)
+
+#endif
+
+
+
+
+.text
+
+/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
+
+longest_match:
+/*
+ * Retrieve the function arguments. %curmatch will hold cur_match
+ * throughout the entire function (passed via rsi on amd64).
+ * rdi will hold the pointer to the deflate_state (first arg on amd64)
+ */
+		mov     %rsi, save_rsi
+		mov     %rbx, save_rbx
+		mov	%r12, save_r12
+		mov     %r13, save_r13
+		mov     %r14, save_r14
+		mov     %r15, save_r15
+
+/* uInt wmask = s->w_mask;						*/
+/* unsigned chain_length = s->max_chain_length;				*/
+/* if (s->prev_length >= s->good_match) {				*/
+/*     chain_length >>= 2;						*/
+/* }									*/
+
+		movl	dsPrevLen, %eax
+		movl	dsGoodMatch, %ebx
+		cmpl	%ebx, %eax
+		movl	dsWMask, %eax
+		movl	dsMaxChainLen, %chainlenwmask
+		jl	LastMatchGood
+		shrl	$2, %chainlenwmask
+LastMatchGood:
+
+/* chainlen is decremented once beforehand so that the function can	*/
+/* use the sign flag instead of the zero flag for the exit test.	*/
+/* It is then shifted into the high word, to make room for the wmask	*/
+/* value, which it will always accompany.				*/
+
+		decl	%chainlenwmask
+		shll	$16, %chainlenwmask
+		orl	%eax, %chainlenwmask
+
+/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;	*/
+
+		movl	dsNiceMatch, %eax
+		movl	dsLookahead, %ebx
+		cmpl	%eax, %ebx
+		jl	LookaheadLess
+		movl	%eax, %ebx
+LookaheadLess:	movl	%ebx, %nicematch
+
+/* register Bytef *scan = s->window + s->strstart;			*/
+
+		mov	dsWindow, %window
+		movl	dsStrStart, %limitd
+		lea	(%limit, %window), %scan
+
+/* Determine how many bytes the scan ptr is off from being		*/
+/* dword-aligned.							*/
+
+		mov	%scan, %scanalign
+		negl	%scanalignd
+		andl	$3, %scanalignd
+
+/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ?			*/
+/*     s->strstart - (IPos)MAX_DIST(s) : NIL;				*/
+
+		movl	dsWSize, %eax
+		subl	$MIN_LOOKAHEAD, %eax
+		xorl	%ecx, %ecx
+		subl	%eax, %limitd
+		cmovng	%ecx, %limitd
+
+/* int best_len = s->prev_length;					*/
+
+		movl	dsPrevLen, %bestlend
+
+/* Store the sum of s->window + best_len in %windowbestlen locally, and in memory.	*/
+
+		lea	(%window, %bestlen), %windowbestlen
+		mov	%windowbestlen, _windowbestlen
+
+/* register ush scan_start = *(ushf*)scan;				*/
+/* register ush scan_end   = *(ushf*)(scan+best_len-1);			*/
+/* Posf *prev = s->prev;						*/
+
+		movzwl	(%scan), %scanstart
+		movzwl	-1(%scan, %bestlen), %scanend
+		mov	dsPrev, %prev
+
+/* Jump into the main loop.						*/
+
+		movl	%chainlenwmask, _chainlenwmask
+		jmp	LoopEntry
+
+.balign 16
+
+/* do {
+ *     match = s->window + cur_match;
+ *     if (*(ushf*)(match+best_len-1) != scan_end ||
+ *         *(ushf*)match != scan_start) continue;
+ *     [...]
+ * } while ((cur_match = prev[cur_match & wmask]) > limit
+ *          && --chain_length != 0);
+ *
+ * Here is the inner loop of the function. The function will spend the
+ * majority of its time in this loop, and majority of that time will
+ * be spent in the first ten instructions.
+ */
+LookupLoop:
+		andl	%chainlenwmask, %curmatchd
+		movzwl	(%prev, %curmatch, 2), %curmatchd
+		cmpl	%limitd, %curmatchd
+		jbe	LeaveNow
+		subl	$0x00010000, %chainlenwmask
+		js	LeaveNow
+LoopEntry:	cmpw	-1(%windowbestlen, %curmatch), %scanendw
+		jne	LookupLoop
+		cmpw	%scanstartw, (%window, %curmatch)
+		jne	LookupLoop
+
+/* Store the current value of chainlen.					*/
+		movl	%chainlenwmask, _chainlenwmask
+
+/* %scan is the string under scrutiny, and %prev to the string we	*/
+/* are hoping to match it up with. In actuality, %esi and %edi are	*/
+/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is	*/
+/* initialized to -(MAX_MATCH_8 - scanalign).				*/
+
+		mov	$(-MAX_MATCH_8), %rdx
+		lea	(%curmatch, %window), %windowbestlen
+		lea	MAX_MATCH_8(%windowbestlen, %scanalign), %windowbestlen
+		lea	MAX_MATCH_8(%scan, %scanalign), %prev
+
+/* the prefetching below makes very little difference... */
+		prefetcht1	(%windowbestlen, %rdx)
+		prefetcht1	(%prev, %rdx)
+
+/*
+ * Test the strings for equality, 8 bytes at a time. At the end,
+ * adjust %rdx so that it is offset to the exact byte that mismatched.
+ *
+ * It should be confessed that this loop usually does not represent
+ * much of the total running time. Replacing it with a more
+ * straightforward "rep cmpsb" would not drastically degrade
+ * performance -- unrolling it, for example, makes no difference.
+ */
+
+#undef USE_SSE	/* works, but is 6-7% slower, than non-SSE... */
+
+LoopCmps:
+#ifdef USE_SSE
+		/* Preload the SSE registers */
+		movdqu	  (%windowbestlen, %rdx), %xmm1
+		movdqu	  (%prev, %rdx), %xmm2
+		pcmpeqb	%xmm2, %xmm1
+		movdqu	16(%windowbestlen, %rdx), %xmm3
+		movdqu	16(%prev, %rdx), %xmm4
+		pcmpeqb	%xmm4, %xmm3
+		movdqu	32(%windowbestlen, %rdx), %xmm5
+		movdqu	32(%prev, %rdx), %xmm6
+		pcmpeqb	%xmm6, %xmm5
+		movdqu	48(%windowbestlen, %rdx), %xmm7
+		movdqu	48(%prev, %rdx), %xmm8
+		pcmpeqb	%xmm8, %xmm7
+
+		/* Check the comparisions' results */
+		pmovmskb %xmm1, %rax
+		notw	%ax
+		bsfw	%ax, %ax
+		jnz	LeaveLoopCmps
+		
+		/* this is the only iteration of the loop with a possibility of having
+		   incremented rdx by 0x108 (each loop iteration add 16*4 = 0x40 
+		   and (0x40*4)+8=0x108 */
+		add	$8, %rdx
+		jz LenMaximum
+		add	$8, %rdx
+
+		
+		pmovmskb %xmm3, %rax
+		notw	%ax
+		bsfw	%ax, %ax
+		jnz	LeaveLoopCmps
+		
+		
+		add	$16, %rdx
+
+
+		pmovmskb %xmm5, %rax
+		notw	%ax
+		bsfw	%ax, %ax
+		jnz	LeaveLoopCmps
+		
+		add	$16, %rdx
+
+
+		pmovmskb %xmm7, %rax
+		notw	%ax
+		bsfw	%ax, %ax
+		jnz	LeaveLoopCmps
+		
+		add	$16, %rdx
+		
+		jmp	LoopCmps
+LeaveLoopCmps:	add	%rax, %rdx
+#else
+		mov	(%windowbestlen, %rdx), %rax
+		xor	(%prev, %rdx), %rax
+		jnz	LeaveLoopCmps
+		
+		mov	8(%windowbestlen, %rdx), %rax
+		xor	8(%prev, %rdx), %rax
+		jnz	LeaveLoopCmps8
+
+		mov	16(%windowbestlen, %rdx), %rax
+		xor	16(%prev, %rdx), %rax
+		jnz	LeaveLoopCmps16
+				
+		add	$24, %rdx
+		jnz	LoopCmps
+		jmp	LenMaximum
+#	if 0
+/*
+ * This three-liner is tantalizingly simple, but bsf is a slow instruction,
+ * and the complicated alternative down below is quite a bit faster. Sad...
+ */
+
+LeaveLoopCmps:	bsf	%rax, %rax /* find the first non-zero bit */
+		shrl	$3, %eax /* divide by 8 to get the byte */
+		add	%rax, %rdx
+#	else
+LeaveLoopCmps16:
+		add	$8, %rdx
+LeaveLoopCmps8:
+		add	$8, %rdx
+LeaveLoopCmps:	testl   $0xFFFFFFFF, %eax /* Check the first 4 bytes */
+		jnz     Check16
+		add     $4, %rdx
+		shr     $32, %rax
+Check16:        testw   $0xFFFF, %ax
+		jnz     LenLower
+		add	$2, %rdx
+		shrl	$16, %eax
+LenLower:	subb	$1, %al
+		adc	$0, %rdx
+#	endif
+#endif
+
+/* Calculate the length of the match. If it is longer than MAX_MATCH,	*/
+/* then automatically accept it as the best possible match and leave.	*/
+
+		lea	(%prev, %rdx), %rax
+		sub	%scan, %rax
+		cmpl	$MAX_MATCH, %eax
+		jge	LenMaximum
+
+/* If the length of the match is not longer than the best match we	*/
+/* have so far, then forget it and return to the lookup loop.		*/
+
+		cmpl	%bestlend, %eax
+		jg	LongerMatch
+		mov	_windowbestlen, %windowbestlen
+		mov	dsPrev, %prev
+		movl	_chainlenwmask, %edx
+		jmp	LookupLoop
+
+/*         s->match_start = cur_match;					*/
+/*         best_len = len;						*/
+/*         if (len >= nice_match) break;				*/
+/*         scan_end = *(ushf*)(scan+best_len-1);			*/
+
+LongerMatch:
+		movl	%eax, %bestlend
+		movl	%curmatchd, dsMatchStart
+		cmpl	%nicematch, %eax
+		jge	LeaveNow
+
+		lea	(%window, %bestlen), %windowbestlen
+		mov	%windowbestlen, _windowbestlen
+
+		movzwl	-1(%scan, %rax), %scanend
+		mov	dsPrev, %prev
+		movl	_chainlenwmask, %chainlenwmask
+		jmp	LookupLoop
+
+/* Accept the current string, with the maximum possible length.		*/
+
+LenMaximum:
+		movl	$MAX_MATCH, %bestlend
+		movl	%curmatchd, dsMatchStart
+
+/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len;		*/
+/* return s->lookahead;							*/
+
+LeaveNow:
+		movl	dsLookahead, %eax
+		cmpl	%eax, %bestlend
+		cmovngl	%bestlend, %eax
+LookaheadRet:
+
+/* Restore the registers and return from whence we came.			*/
+
+	mov	save_rsi, %rsi
+	mov	save_rbx, %rbx
+	mov	save_r12, %r12
+	mov	save_r13, %r13
+	mov	save_r14, %r14
+	mov	save_r15, %r15
+
+	ret
+
+match_init:	ret

contrib/asm586/README.586

@@ -1,43 +0,0 @@
-This is a patched version of zlib modified to use
-Pentium-optimized assembly code in the deflation algorithm. The files
-changed/added by this patch are:
-
-README.586
-match.S
-
-The effectiveness of these modifications is a bit marginal, as the the
-program's bottleneck seems to be mostly L1-cache contention, for which
-there is no real way to work around without rewriting the basic
-algorithm. The speedup on average is around 5-10% (which is generally
-less than the amount of variance between subsequent executions).
-However, when used at level 9 compression, the cache contention can
-drop enough for the assembly version to achieve 10-20% speedup (and
-sometimes more, depending on the amount of overall redundancy in the
-files). Even here, though, cache contention can still be the limiting
-factor, depending on the nature of the program using the zlib library.
-This may also mean that better improvements will be seen on a Pentium
-with MMX, which suffers much less from L1-cache contention, but I have
-not yet verified this.
-
-Note that this code has been tailored for the Pentium in particular,
-and will not perform well on the Pentium Pro (due to the use of a
-partial register in the inner loop).
-
-If you are using an assembler other than GNU as, you will have to
-translate match.S to use your assembler's syntax. (Have fun.)
-
-Brian Raiter
-breadbox@muppetlabs.com
-April, 1998
-
-
-Added for zlib 1.1.3:
-
-The patches come from
-http://www.muppetlabs.com/~breadbox/software/assembly.html
-
-To compile zlib with this asm file, copy match.S to the zlib directory
-then do:
-
-CFLAGS="-O3 -DASMV" ./configure
-make OBJA=match.o

contrib/asm586/match.S

@@ -1,354 +0,0 @@
-/* match.s -- Pentium-optimized version of longest_match()
- * Written for zlib 1.1.2
- * Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
- *
- * This is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License.
- */
-
-#ifndef NO_UNDERLINE
-#define	match_init	_match_init
-#define	longest_match	_longest_match
-#endif
-
-#define	MAX_MATCH	(258)
-#define	MIN_MATCH	(3)
-#define	MIN_LOOKAHEAD	(MAX_MATCH + MIN_MATCH + 1)
-#define	MAX_MATCH_8	((MAX_MATCH + 7) & ~7)
-
-/* stack frame offsets */
-
-#define	wmask			0	/* local copy of s->wmask	*/
-#define	window			4	/* local copy of s->window	*/
-#define	windowbestlen		8	/* s->window + bestlen		*/
-#define	chainlenscanend		12	/* high word: current chain len	*/
-					/* low word: last bytes sought	*/
-#define	scanstart		16	/* first two bytes of string	*/
-#define	scanalign		20	/* dword-misalignment of string	*/
-#define	nicematch		24	/* a good enough match size	*/
-#define	bestlen			28	/* size of best match so far	*/
-#define	scan			32	/* ptr to string wanting match	*/
-
-#define	LocalVarsSize		(36)
-/*	saved ebx		36 */
-/*	saved edi		40 */
-/*	saved esi		44 */
-/*	saved ebp		48 */
-/*	return address		52 */
-#define	deflatestate		56	/* the function arguments	*/
-#define	curmatch		60
-
-/* Offsets for fields in the deflate_state structure. These numbers
- * are calculated from the definition of deflate_state, with the
- * assumption that the compiler will dword-align the fields. (Thus,
- * changing the definition of deflate_state could easily cause this
- * program to crash horribly, without so much as a warning at
- * compile time. Sigh.)
- */
-#define	dsWSize			36
-#define	dsWMask			44
-#define	dsWindow		48
-#define	dsPrev			56
-#define	dsMatchLen		88
-#define	dsPrevMatch		92
-#define	dsStrStart		100
-#define	dsMatchStart		104
-#define	dsLookahead		108
-#define	dsPrevLen		112
-#define	dsMaxChainLen		116
-#define	dsGoodMatch		132
-#define	dsNiceMatch		136
-
-
-.file "match.S"
-
-.globl	match_init, longest_match
-
-.text
-
-/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
-
-longest_match:
-
-/* Save registers that the compiler may be using, and adjust %esp to	*/
-/* make room for our stack frame.					*/
-
-		pushl	%ebp
-		pushl	%edi
-		pushl	%esi
-		pushl	%ebx
-		subl	$LocalVarsSize, %esp
-
-/* Retrieve the function arguments. %ecx will hold cur_match		*/
-/* throughout the entire function. %edx will hold the pointer to the	*/
-/* deflate_state structure during the function's setup (before		*/
-/* entering the main loop).						*/
-
-		movl	deflatestate(%esp), %edx
-		movl	curmatch(%esp), %ecx
-
-/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;	*/
-
-		movl	dsNiceMatch(%edx), %eax
-		movl	dsLookahead(%edx), %ebx
-		cmpl	%eax, %ebx
-		jl	LookaheadLess
-		movl	%eax, %ebx
-LookaheadLess:	movl	%ebx, nicematch(%esp)
-
-/* register Bytef *scan = s->window + s->strstart;			*/
-
-		movl	dsWindow(%edx), %esi
-		movl	%esi, window(%esp)
-		movl	dsStrStart(%edx), %ebp
-		lea	(%esi,%ebp), %edi
-		movl	%edi, scan(%esp)
-
-/* Determine how many bytes the scan ptr is off from being		*/
-/* dword-aligned.							*/
-
-		movl	%edi, %eax
-		negl	%eax
-		andl	$3, %eax
-		movl	%eax, scanalign(%esp)
-
-/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ?			*/
-/*     s->strstart - (IPos)MAX_DIST(s) : NIL;				*/
-
-		movl	dsWSize(%edx), %eax
-		subl	$MIN_LOOKAHEAD, %eax
-		subl	%eax, %ebp
-		jg	LimitPositive
-		xorl	%ebp, %ebp
-LimitPositive:
-
-/* unsigned chain_length = s->max_chain_length;				*/
-/* if (s->prev_length >= s->good_match) {				*/
-/*     chain_length >>= 2;						*/
-/* }									*/
-
-		movl	dsPrevLen(%edx), %eax
-		movl	dsGoodMatch(%edx), %ebx
-		cmpl	%ebx, %eax
-		movl	dsMaxChainLen(%edx), %ebx
-		jl	LastMatchGood
-		shrl	$2, %ebx
-LastMatchGood:
-
-/* chainlen is decremented once beforehand so that the function can	*/
-/* use the sign flag instead of the zero flag for the exit test.	*/
-/* It is then shifted into the high word, to make room for the scanend	*/
-/* scanend value, which it will always accompany.			*/
-
-		decl	%ebx
-		shll	$16, %ebx
-
-/* int best_len = s->prev_length;					*/
-
-		movl	dsPrevLen(%edx), %eax
-		movl	%eax, bestlen(%esp)
-
-/* Store the sum of s->window + best_len in %esi locally, and in %esi.	*/
-
-		addl	%eax, %esi
-		movl	%esi, windowbestlen(%esp)
-
-/* register ush scan_start = *(ushf*)scan;				*/
-/* register ush scan_end   = *(ushf*)(scan+best_len-1);			*/
-
-		movw	(%edi), %bx
-		movw	%bx, scanstart(%esp)
-		movw	-1(%edi,%eax), %bx
-		movl	%ebx, chainlenscanend(%esp)
-
-/* Posf *prev = s->prev;						*/
-/* uInt wmask = s->w_mask;						*/
-
-		movl	dsPrev(%edx), %edi
-		movl	dsWMask(%edx), %edx
-		mov	%edx, wmask(%esp)
-
-/* Jump into the main loop.						*/
-
-		jmp	LoopEntry
-
-.balign 16
-
-/* do {
- *     match = s->window + cur_match;
- *     if (*(ushf*)(match+best_len-1) != scan_end ||
- *         *(ushf*)match != scan_start) continue;
- *     [...]
- * } while ((cur_match = prev[cur_match & wmask]) > limit
- *          && --chain_length != 0);
- *
- * Here is the inner loop of the function. The function will spend the
- * majority of its time in this loop, and majority of that time will
- * be spent in the first ten instructions.
- *
- * Within this loop:
- * %ebx = chainlenscanend - i.e., ((chainlen << 16) | scanend)
- * %ecx = curmatch
- * %edx = curmatch & wmask
- * %esi = windowbestlen - i.e., (window + bestlen)
- * %edi = prev
- * %ebp = limit
- *
- * Two optimization notes on the choice of instructions:
- *
- * The first instruction uses a 16-bit address, which costs an extra,
- * unpairable cycle. This is cheaper than doing a 32-bit access and
- * zeroing the high word, due to the 3-cycle misalignment penalty which
- * would occur half the time. This also turns out to be cheaper than
- * doing two separate 8-bit accesses, as the memory is so rarely in the
- * L1 cache.
- *
- * The window buffer, however, apparently spends a lot of time in the
- * cache, and so it is faster to retrieve the word at the end of the
- * match string with two 8-bit loads. The instructions that test the
- * word at the beginning of the match string, however, are executed
- * much less frequently, and there it was cheaper to use 16-bit
- * instructions, which avoided the necessity of saving off and
- * subsequently reloading one of the other registers.
- */
-LookupLoop:
-							/* 1 U & V  */
-		movw	(%edi,%edx,2), %cx		/* 2 U pipe */
-		movl	wmask(%esp), %edx		/* 2 V pipe */
-		cmpl	%ebp, %ecx			/* 3 U pipe */
-		jbe	LeaveNow			/* 3 V pipe */
-		subl	$0x00010000, %ebx		/* 4 U pipe */
-		js	LeaveNow			/* 4 V pipe */
-LoopEntry:	movb	-1(%esi,%ecx), %al		/* 5 U pipe */
-		andl	%ecx, %edx			/* 5 V pipe */
-		cmpb	%bl, %al			/* 6 U pipe */
-		jnz	LookupLoop			/* 6 V pipe */
-		movb	(%esi,%ecx), %ah
-		cmpb	%bh, %ah
-		jnz	LookupLoop
-		movl	window(%esp), %eax
-		movw	(%eax,%ecx), %ax
-		cmpw	scanstart(%esp), %ax
-		jnz	LookupLoop
-
-/* Store the current value of chainlen.					*/
-
-		movl	%ebx, chainlenscanend(%esp)
-
-/* Point %edi to the string under scrutiny, and %esi to the string we	*/
-/* are hoping to match it up with. In actuality, %esi and %edi are	*/
-/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is	*/
-/* initialized to -(MAX_MATCH_8 - scanalign).				*/
-
-		movl	window(%esp), %esi
-		movl	scan(%esp), %edi
-		addl	%ecx, %esi
-		movl	scanalign(%esp), %eax
-		movl	$(-MAX_MATCH_8), %edx
-		lea	MAX_MATCH_8(%edi,%eax), %edi
-		lea	MAX_MATCH_8(%esi,%eax), %esi
-
-/* Test the strings for equality, 8 bytes at a time. At the end,
- * adjust %edx so that it is offset to the exact byte that mismatched.
- *
- * We already know at this point that the first three bytes of the
- * strings match each other, and they can be safely passed over before
- * starting the compare loop. So what this code does is skip over 0-3
- * bytes, as much as necessary in order to dword-align the %edi
- * pointer. (%esi will still be misaligned three times out of four.)
- *
- * It should be confessed that this loop usually does not represent
- * much of the total running time. Replacing it with a more
- * straightforward "rep cmpsb" would not drastically degrade
- * performance.
- */
-LoopCmps:
-		movl	(%esi,%edx), %eax
-		movl	(%edi,%edx), %ebx
-		xorl	%ebx, %eax
-		jnz	LeaveLoopCmps
-		movl	4(%esi,%edx), %eax
-		movl	4(%edi,%edx), %ebx
-		xorl	%ebx, %eax
-		jnz	LeaveLoopCmps4
-		addl	$8, %edx
-		jnz	LoopCmps
-		jmp	LenMaximum
-LeaveLoopCmps4:	addl	$4, %edx
-LeaveLoopCmps:	testl	$0x0000FFFF, %eax
-		jnz	LenLower
-		addl	$2, %edx
-		shrl	$16, %eax
-LenLower:	subb	$1, %al
-		adcl	$0, %edx
-
-/* Calculate the length of the match. If it is longer than MAX_MATCH,	*/
-/* then automatically accept it as the best possible match and leave.	*/
-
-		lea	(%edi,%edx), %eax
-		movl	scan(%esp), %edi
-		subl	%edi, %eax
-		cmpl	$MAX_MATCH, %eax
-		jge	LenMaximum
-
-/* If the length of the match is not longer than the best match we	*/
-/* have so far, then forget it and return to the lookup loop.		*/
-
-		movl	deflatestate(%esp), %edx
-		movl	bestlen(%esp), %ebx
-		cmpl	%ebx, %eax
-		jg	LongerMatch
-		movl	chainlenscanend(%esp), %ebx
-		movl	windowbestlen(%esp), %esi
-		movl	dsPrev(%edx), %edi
-		movl	wmask(%esp), %edx
-		andl	%ecx, %edx
-		jmp	LookupLoop
-
-/*         s->match_start = cur_match;					*/
-/*         best_len = len;						*/
-/*         if (len >= nice_match) break;				*/
-/*         scan_end = *(ushf*)(scan+best_len-1);			*/
-
-LongerMatch:	movl	nicematch(%esp), %ebx
-		movl	%eax, bestlen(%esp)
-		movl	%ecx, dsMatchStart(%edx)
-		cmpl	%ebx, %eax
-		jge	LeaveNow
-		movl	window(%esp), %esi
-		addl	%eax, %esi
-		movl	%esi, windowbestlen(%esp)
-		movl	chainlenscanend(%esp), %ebx
-		movw	-1(%edi,%eax), %bx
-		movl	dsPrev(%edx), %edi
-		movl	%ebx, chainlenscanend(%esp)
-		movl	wmask(%esp), %edx
-		andl	%ecx, %edx
-		jmp	LookupLoop
-
-/* Accept the current string, with the maximum possible length.		*/
-
-LenMaximum:	movl	deflatestate(%esp), %edx
-		movl	$MAX_MATCH, bestlen(%esp)
-		movl	%ecx, dsMatchStart(%edx)
-
-/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len;		*/
-/* return s->lookahead;							*/
-
-LeaveNow:
-		movl	deflatestate(%esp), %edx
-		movl	bestlen(%esp), %ebx
-		movl	dsLookahead(%edx), %eax
-		cmpl	%eax, %ebx
-		jg	LookaheadRet
-		movl	%ebx, %eax
-LookaheadRet:
-
-/* Restore the stack and return from whence we came.			*/
-
-		addl	$LocalVarsSize, %esp
-		popl	%ebx
-		popl	%esi
-		popl	%edi
-		popl	%ebp
-match_init:	ret

contrib/asm686/README.686

@@ -32,3 +32,20 @@ then do:
 
 CFLAGS="-O3 -DASMV" ./configure
 make OBJA=match.o
+
+
+Update:
+
+I've been ignoring these assembly routines for years, believing that
+gcc's generated code had caught up with it sometime around gcc 2.95
+and the major rearchitecting of the Pentium 4. However, I recently
+learned that, despite what I believed, this code still has some life
+in it. On the Pentium 4 and AMD64 chips, it continues to run about 8%
+faster than the code produced by gcc 4.1.
+
+In acknowledgement of its continuing usefulness, I've altered the
+license to match that of the rest of zlib. Share and Enjoy!
+
+Brian Raiter
+breadbox@muppetlabs.com
+April, 2007

contrib/asm686/match.S

@@ -1,9 +1,23 @@
-/* match.s -- Pentium-Pro-optimized version of longest_match()
+/* match.S -- x86 assembly version of the zlib longest_match() function.
- * Written for zlib 1.1.2
+ * Optimized for the Intel 686 chips (PPro and later).
- * Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
  *
- * This is free software; you can redistribute it and/or modify it
+ * Copyright (C) 1998, 2007 Brian Raiter <breadbox@muppetlabs.com>
- * under the terms of the GNU General Public License.
+ *
+ * This software is provided 'as-is', without any express or implied
+ * warranty.  In no event will the author be held liable for any damages
+ * arising from the use of this software.
+ *
+ * Permission is granted to anyone to use this software for any purpose,
+ * including commercial applications, and to alter it and redistribute it
+ * freely, subject to the following restrictions:
+ *
+ * 1. The origin of this software must not be misrepresented; you must not
+ *    claim that you wrote the original software. If you use this software
+ *    in a product, an acknowledgment in the product documentation would be
+ *    appreciated but is not required.
+ * 2. Altered source versions must be plainly marked as such, and must not be
+ *    misrepresented as being the original software.
+ * 3. This notice may not be removed or altered from any source distribution.
  */
 
 #ifndef NO_UNDERLINE
@@ -38,26 +52,28 @@
 #define	deflatestate		56	/* the function arguments	*/
 #define	curmatch		60
 
-/* Offsets for fields in the deflate_state structure. These numbers
+/* All the +zlib1222add offsets are due to the addition of fields
- * are calculated from the definition of deflate_state, with the
+ *  in zlib in the deflate_state structure since the asm code was first written
- * assumption that the compiler will dword-align the fields. (Thus,
+ * (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
- * changing the definition of deflate_state could easily cause this
+ * (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
- * program to crash horribly, without so much as a warning at
+ * if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
- * compile time. Sigh.)
  */
-#define	dsWSize			36
+
-#define	dsWMask			44
+#define zlib1222add		(8)
-#define	dsWindow		48
+
-#define	dsPrev			56
+#define	dsWSize			(36+zlib1222add)
-#define	dsMatchLen		88
+#define	dsWMask			(44+zlib1222add)
-#define	dsPrevMatch		92
+#define	dsWindow		(48+zlib1222add)
-#define	dsStrStart		100
+#define	dsPrev			(56+zlib1222add)
-#define	dsMatchStart		104
+#define	dsMatchLen		(88+zlib1222add)
-#define	dsLookahead		108
+#define	dsPrevMatch		(92+zlib1222add)
-#define	dsPrevLen		112
+#define	dsStrStart		(100+zlib1222add)
-#define	dsMaxChainLen		116
+#define	dsMatchStart		(104+zlib1222add)
-#define	dsGoodMatch		132
+#define	dsLookahead		(108+zlib1222add)
-#define	dsNiceMatch		136
+#define	dsPrevLen		(112+zlib1222add)
+#define	dsMaxChainLen		(116+zlib1222add)
+#define	dsGoodMatch		(132+zlib1222add)
+#define	dsNiceMatch		(136+zlib1222add)
 
 
 .file "match.S"

contrib/delphi/ZLib.pas

@@ -152,7 +152,7 @@ procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
   const OutBuf: Pointer; BufSize: Integer);
 
 const
-  zlib_version = '1.2.1';
+  zlib_version = '1.2.5';
 
 type
   EZlibError = class(Exception);
@@ -344,7 +344,7 @@ begin
     strm.avail_out := OutBytes;
     DCheck(inflateInit_(strm, zlib_version, sizeof(strm)));
     try
-      while DCheck(inflate(strm, Z_FINISH)) <> Z_STREAM_END do
+      while DCheck(inflate(strm, Z_NO_FLUSH)) <> Z_STREAM_END do
       begin
         P := OutBuf;
         Inc(OutBytes, BufInc);
@@ -510,7 +510,7 @@ begin
         Result := Count - FZRec.avail_out;
         Exit;
       end;
-          FZRec.next_in := FBuffer;
+      FZRec.next_in := FBuffer;
       FStrmPos := FStrm.Position;
       Progress(Self);
     end;

contrib/delphi/zlibd32.mak

@@ -18,10 +18,10 @@ LDFLAGS =
 # variables
 ZLIB_LIB = zlib.lib
 
-OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infback.obj
+OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj
-OBJ2 = inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
+OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
-OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzio.obj+infback.obj
+OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj
-OBJP2 = +inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj
+OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj
 
 
 # targets
@@ -38,7 +38,13 @@ crc32.obj: crc32.c zlib.h zconf.h crc32.h
 
 deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
 
-gzio.obj: gzio.c zutil.h zlib.h zconf.h
+gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h
+
+gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h
+
+gzread.obj: gzread.c zlib.h zconf.h gzguts.h
+
+gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h
 
 infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
  inffast.h inffixed.h

contrib/dotzlib/DotZLib.build

@@ -0,0 +1,33 @@
+<?xml version="1.0" encoding="utf-8" ?>
+<project name="DotZLib" default="build" basedir="./DotZLib">
+	<description>A .Net wrapper library around ZLib1.dll</description>
+
+	<property name="nunit.location" value="c:/program files/NUnit V2.1/bin" />
+	<property name="build.root" value="bin" />
+
+	<property name="debug" value="true" />
+	<property name="nunit" value="true" />
+
+	<property name="build.folder" value="${build.root}/debug/" if="${debug}" />
+	<property name="build.folder" value="${build.root}/release/" unless="${debug}" />
+
+	<target name="clean" description="Remove all generated files">
+		<delete dir="${build.root}" failonerror="false" />
+	</target>
+
+	<target name="build" description="compiles the source code">
+
+		<mkdir dir="${build.folder}" />
+		<csc target="library" output="${build.folder}DotZLib.dll" debug="${debug}">
+			<references basedir="${nunit.location}">
+				<includes if="${nunit}" name="nunit.framework.dll" />
+			</references>
+			<sources>
+				<includes name="*.cs" />
+				<excludes name="UnitTests.cs" unless="${nunit}" />
+			</sources>
+			<arg value="/d:nunit" if="${nunit}" />
+		</csc>
+	</target>
+
+</project>

contrib/dotzlib/DotZLib.sln

@@ -0,0 +1,21 @@
+Microsoft Visual Studio Solution File, Format Version 8.00
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "DotZLib", "DotZLib\DotZLib.csproj", "{BB1EE0B1-1808-46CB-B786-949D91117FC5}"
+	ProjectSection(ProjectDependencies) = postProject
+	EndProjectSection
+EndProject
+Global
+	GlobalSection(SolutionConfiguration) = preSolution
+		Debug = Debug
+		Release = Release
+	EndGlobalSection
+	GlobalSection(ProjectConfiguration) = postSolution
+		{BB1EE0B1-1808-46CB-B786-949D91117FC5}.Debug.ActiveCfg = Debug|.NET
+		{BB1EE0B1-1808-46CB-B786-949D91117FC5}.Debug.Build.0 = Debug|.NET
+		{BB1EE0B1-1808-46CB-B786-949D91117FC5}.Release.ActiveCfg = Release|.NET
+		{BB1EE0B1-1808-46CB-B786-949D91117FC5}.Release.Build.0 = Release|.NET
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+	EndGlobalSection
+	GlobalSection(ExtensibilityAddIns) = postSolution
+	EndGlobalSection
+EndGlobal

contrib/dotzlib/DotZLib/AssemblyInfo.cs

@@ -0,0 +1,58 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("DotZLib")]
+[assembly: AssemblyDescription(".Net bindings for ZLib compression dll 1.2.x")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("Henrik Ravn")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("(c) 2004 by Henrik Ravn")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.0.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing.
+//
+// Notes:
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+[assembly: AssemblyKeyFile("")]
+[assembly: AssemblyKeyName("")]

contrib/dotzlib/DotZLib/ChecksumImpl.cs

@@ -0,0 +1,202 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Runtime.InteropServices;
+using System.Text;
+
+
+namespace DotZLib
+{
+    #region ChecksumGeneratorBase
+    /// <summary>
+    /// Implements the common functionality needed for all <see cref="ChecksumGenerator"/>s
+    /// </summary>
+    /// <example></example>
+    public abstract class ChecksumGeneratorBase : ChecksumGenerator
+    {
+        /// <summary>
+        /// The value of the current checksum
+        /// </summary>
+        protected uint _current;
+
+        /// <summary>
+        /// Initializes a new instance of the checksum generator base - the current checksum is
+        /// set to zero
+        /// </summary>
+        public ChecksumGeneratorBase()
+        {
+            _current = 0;
+        }
+
+        /// <summary>
+        /// Initializes a new instance of the checksum generator basewith a specified value
+        /// </summary>
+        /// <param name="initialValue">The value to set the current checksum to</param>
+        public ChecksumGeneratorBase(uint initialValue)
+        {
+            _current = initialValue;
+        }
+
+        /// <summary>
+        /// Resets the current checksum to zero
+        /// </summary>
+        public void Reset() { _current = 0; }
+
+        /// <summary>
+        /// Gets the current checksum value
+        /// </summary>
+        public uint Value { get { return _current; } }
+
+        /// <summary>
+        /// Updates the current checksum with part of an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        /// <param name="offset">Where in <c>data</c> to start updating</param>
+        /// <param name="count">The number of bytes from <c>data</c> to use</param>
+        /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+        /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>
+        /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+        /// <remarks>All the other <c>Update</c> methods are implmeneted in terms of this one.
+        /// This is therefore the only method a derived class has to implement</remarks>
+        public abstract void Update(byte[] data, int offset, int count);
+
+        /// <summary>
+        /// Updates the current checksum with an array of bytes.
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        public void Update(byte[] data)
+        {
+            Update(data, 0, data.Length);
+        }
+
+        /// <summary>
+        /// Updates the current checksum with the data from a string
+        /// </summary>
+        /// <param name="data">The string to update the checksum with</param>
+        /// <remarks>The characters in the string are converted by the UTF-8 encoding</remarks>
+        public void Update(string data)
+        {
+			Update(Encoding.UTF8.GetBytes(data));
+        }
+
+        /// <summary>
+        /// Updates the current checksum with the data from a string, using a specific encoding
+        /// </summary>
+        /// <param name="data">The string to update the checksum with</param>
+        /// <param name="encoding">The encoding to use</param>
+        public void Update(string data, Encoding encoding)
+        {
+            Update(encoding.GetBytes(data));
+        }
+
+    }
+    #endregion
+
+    #region CRC32
+    /// <summary>
+    /// Implements a CRC32 checksum generator
+    /// </summary>
+    public sealed class CRC32Checksum : ChecksumGeneratorBase
+    {
+        #region DLL imports
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern uint crc32(uint crc, int data, uint length);
+
+        #endregion
+
+        /// <summary>
+        /// Initializes a new instance of the CRC32 checksum generator
+        /// </summary>
+        public CRC32Checksum() : base() {}
+
+        /// <summary>
+        /// Initializes a new instance of the CRC32 checksum generator with a specified value
+        /// </summary>
+        /// <param name="initialValue">The value to set the current checksum to</param>
+        public CRC32Checksum(uint initialValue) : base(initialValue) {}
+
+        /// <summary>
+        /// Updates the current checksum with part of an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        /// <param name="offset">Where in <c>data</c> to start updating</param>
+        /// <param name="count">The number of bytes from <c>data</c> to use</param>
+        /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+        /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>
+        /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+        public override void Update(byte[] data, int offset, int count)
+        {
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > data.Length) throw new ArgumentException();
+            GCHandle hData = GCHandle.Alloc(data, GCHandleType.Pinned);
+            try
+            {
+                _current = crc32(_current, hData.AddrOfPinnedObject().ToInt32()+offset, (uint)count);
+            }
+            finally
+            {
+                hData.Free();
+            }
+        }
+
+    }
+    #endregion
+
+    #region Adler
+    /// <summary>
+    /// Implements a checksum generator that computes the Adler checksum on data
+    /// </summary>
+    public sealed class AdlerChecksum : ChecksumGeneratorBase
+    {
+        #region DLL imports
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern uint adler32(uint adler, int data, uint length);
+
+        #endregion
+
+        /// <summary>
+        /// Initializes a new instance of the Adler checksum generator
+        /// </summary>
+        public AdlerChecksum() : base() {}
+
+        /// <summary>
+        /// Initializes a new instance of the Adler checksum generator with a specified value
+        /// </summary>
+        /// <param name="initialValue">The value to set the current checksum to</param>
+        public AdlerChecksum(uint initialValue) : base(initialValue) {}
+
+        /// <summary>
+        /// Updates the current checksum with part of an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        /// <param name="offset">Where in <c>data</c> to start updating</param>
+        /// <param name="count">The number of bytes from <c>data</c> to use</param>
+        /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+        /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>
+        /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+        public override void Update(byte[] data, int offset, int count)
+        {
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > data.Length) throw new ArgumentException();
+            GCHandle hData = GCHandle.Alloc(data, GCHandleType.Pinned);
+            try
+            {
+                _current = adler32(_current, hData.AddrOfPinnedObject().ToInt32()+offset, (uint)count);
+            }
+            finally
+            {
+                hData.Free();
+            }
+        }
+
+    }
+    #endregion
+
+}

contrib/dotzlib/DotZLib/CircularBuffer.cs

@@ -0,0 +1,83 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Diagnostics;
+
+namespace DotZLib
+{
+
+	/// <summary>
+	/// This class implements a circular buffer
+	/// </summary>
+	internal class CircularBuffer
+	{
+        #region Private data
+        private int _capacity;
+        private int _head;
+        private int _tail;
+        private int _size;
+        private byte[] _buffer;
+        #endregion
+
+        public CircularBuffer(int capacity)
+        {
+            Debug.Assert( capacity > 0 );
+            _buffer = new byte[capacity];
+            _capacity = capacity;
+            _head = 0;
+            _tail = 0;
+            _size = 0;
+        }
+
+        public int Size { get { return _size; } }
+
+        public int Put(byte[] source, int offset, int count)
+        {
+            Debug.Assert( count > 0 );
+            int trueCount = Math.Min(count, _capacity - Size);
+            for (int i = 0; i < trueCount; ++i)
+                _buffer[(_tail+i) % _capacity] = source[offset+i];
+            _tail += trueCount;
+            _tail %= _capacity;
+            _size += trueCount;
+            return trueCount;
+        }
+
+        public bool Put(byte b)
+        {
+            if (Size == _capacity) // no room
+                return false;
+            _buffer[_tail++] = b;
+            _tail %= _capacity;
+            ++_size;
+            return true;
+        }
+
+        public int Get(byte[] destination, int offset, int count)
+        {
+            int trueCount = Math.Min(count,Size);
+            for (int i = 0; i < trueCount; ++i)
+                destination[offset + i] = _buffer[(_head+i) % _capacity];
+            _head += trueCount;
+            _head %= _capacity;
+            _size -= trueCount;
+            return trueCount;
+        }
+
+        public int Get()
+        {
+            if (Size == 0)
+                return -1;
+
+            int result = (int)_buffer[_head++ % _capacity];
+            --_size;
+            return result;
+        }
+
+    }
+}

contrib/dotzlib/DotZLib/CodecBase.cs

@@ -0,0 +1,198 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+	/// <summary>
+	/// Implements the common functionality needed for all <see cref="Codec"/>s
+	/// </summary>
+	public abstract class CodecBase : Codec, IDisposable
+	{
+
+        #region Data members
+
+        /// <summary>
+        /// Instance of the internal zlib buffer structure that is
+        /// passed to all functions in the zlib dll
+        /// </summary>
+        internal ZStream _ztream = new ZStream();
+
+        /// <summary>
+        /// True if the object instance has been disposed, false otherwise
+        /// </summary>
+        protected bool _isDisposed = false;
+
+        /// <summary>
+        /// The size of the internal buffers
+        /// </summary>
+        protected const int kBufferSize = 16384;
+
+        private byte[] _outBuffer = new byte[kBufferSize];
+        private byte[] _inBuffer = new byte[kBufferSize];
+
+        private GCHandle _hInput;
+        private GCHandle _hOutput;
+
+        private uint _checksum = 0;
+
+        #endregion
+
+        /// <summary>
+        /// Initializes a new instance of the <c>CodeBase</c> class.
+        /// </summary>
+		public CodecBase()
+		{
+            try
+            {
+                _hInput = GCHandle.Alloc(_inBuffer, GCHandleType.Pinned);
+                _hOutput = GCHandle.Alloc(_outBuffer, GCHandleType.Pinned);
+            }
+            catch (Exception)
+            {
+                CleanUp(false);
+                throw;
+            }
+        }
+
+
+        #region Codec Members
+
+        /// <summary>
+        /// Occurs when more processed data are available.
+        /// </summary>
+        public event DataAvailableHandler DataAvailable;
+
+        /// <summary>
+        /// Fires the <see cref="DataAvailable"/> event
+        /// </summary>
+        protected void OnDataAvailable()
+        {
+            if (_ztream.total_out > 0)
+            {
+                if (DataAvailable != null)
+                    DataAvailable( _outBuffer, 0, (int)_ztream.total_out);
+                resetOutput();
+            }
+        }
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        public void Add(byte[] data)
+        {
+            Add(data,0,data.Length);
+        }
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+        /// <param name="count">The number of bytes to add</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        /// <remarks>This must be implemented by a derived class</remarks>
+        public abstract void Add(byte[] data, int offset, int count);
+
+        /// <summary>
+        /// Finishes up any pending data that needs to be processed and handled.
+        /// </summary>
+        /// <remarks>This must be implemented by a derived class</remarks>
+        public abstract void Finish();
+
+        /// <summary>
+        /// Gets the checksum of the data that has been added so far
+        /// </summary>
+        public uint Checksum { get { return _checksum; } }
+
+        #endregion
+
+        #region Destructor & IDisposable stuff
+
+        /// <summary>
+        /// Destroys this instance
+        /// </summary>
+        ~CodecBase()
+        {
+            CleanUp(false);
+        }
+
+        /// <summary>
+        /// Releases any unmanaged resources and calls the <see cref="CleanUp()"/> method of the derived class
+        /// </summary>
+        public void Dispose()
+        {
+            CleanUp(true);
+        }
+
+        /// <summary>
+        /// Performs any codec specific cleanup
+        /// </summary>
+        /// <remarks>This must be implemented by a derived class</remarks>
+        protected abstract void CleanUp();
+
+        // performs the release of the handles and calls the dereived CleanUp()
+        private void CleanUp(bool isDisposing)
+        {
+            if (!_isDisposed)
+            {
+                CleanUp();
+                if (_hInput.IsAllocated)
+                    _hInput.Free();
+                if (_hOutput.IsAllocated)
+                    _hOutput.Free();
+
+                _isDisposed = true;
+            }
+        }
+
+
+        #endregion
+
+        #region Helper methods
+
+        /// <summary>
+        /// Copies a number of bytes to the internal codec buffer - ready for proccesing
+        /// </summary>
+        /// <param name="data">The byte array that contains the data to copy</param>
+        /// <param name="startIndex">The index of the first byte to copy</param>
+        /// <param name="count">The number of bytes to copy from <c>data</c></param>
+        protected void copyInput(byte[] data, int startIndex, int count)
+        {
+            Array.Copy(data, startIndex, _inBuffer,0, count);
+            _ztream.next_in = _hInput.AddrOfPinnedObject();
+            _ztream.total_in = 0;
+            _ztream.avail_in = (uint)count;
+
+        }
+
+        /// <summary>
+        /// Resets the internal output buffers to a known state - ready for processing
+        /// </summary>
+        protected void resetOutput()
+        {
+            _ztream.total_out = 0;
+            _ztream.avail_out = kBufferSize;
+            _ztream.next_out = _hOutput.AddrOfPinnedObject();
+        }
+
+        /// <summary>
+        /// Updates the running checksum property
+        /// </summary>
+        /// <param name="newSum">The new checksum value</param>
+        protected void setChecksum(uint newSum)
+        {
+            _checksum = newSum;
+        }
+        #endregion
+
+    }
+}

contrib/dotzlib/DotZLib/Deflater.cs

@@ -0,0 +1,106 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Diagnostics;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+
+    /// <summary>
+    /// Implements a data compressor, using the deflate algorithm in the ZLib dll
+    /// </summary>
+	public sealed class Deflater : CodecBase
+	{
+        #region Dll imports
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)]
+        private static extern int deflateInit_(ref ZStream sz, int level, string vs, int size);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int deflate(ref ZStream sz, int flush);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int deflateReset(ref ZStream sz);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int deflateEnd(ref ZStream sz);
+        #endregion
+
+        /// <summary>
+        /// Constructs an new instance of the <c>Deflater</c>
+        /// </summary>
+        /// <param name="level">The compression level to use for this <c>Deflater</c></param>
+		public Deflater(CompressLevel level) : base()
+		{
+            int retval = deflateInit_(ref _ztream, (int)level, Info.Version, Marshal.SizeOf(_ztream));
+            if (retval != 0)
+                throw new ZLibException(retval, "Could not initialize deflater");
+
+            resetOutput();
+		}
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+        /// <param name="count">The number of bytes to add</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        public override void Add(byte[] data, int offset, int count)
+        {
+            if (data == null) throw new ArgumentNullException();
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > data.Length) throw new ArgumentException();
+
+            int total = count;
+            int inputIndex = offset;
+            int err = 0;
+
+            while (err >= 0 && inputIndex < total)
+            {
+                copyInput(data, inputIndex, Math.Min(total - inputIndex, kBufferSize));
+                while (err >= 0 && _ztream.avail_in > 0)
+                {
+                    err = deflate(ref _ztream, (int)FlushTypes.None);
+                    if (err == 0)
+                        while (_ztream.avail_out == 0)
+                        {
+                            OnDataAvailable();
+                            err = deflate(ref _ztream, (int)FlushTypes.None);
+                        }
+                    inputIndex += (int)_ztream.total_in;
+                }
+            }
+            setChecksum( _ztream.adler );
+        }
+
+
+        /// <summary>
+        /// Finishes up any pending data that needs to be processed and handled.
+        /// </summary>
+        public override void Finish()
+        {
+            int err;
+            do
+            {
+                err = deflate(ref _ztream, (int)FlushTypes.Finish);
+                OnDataAvailable();
+            }
+            while (err == 0);
+            setChecksum( _ztream.adler );
+            deflateReset(ref _ztream);
+            resetOutput();
+        }
+
+        /// <summary>
+        /// Closes the internal zlib deflate stream
+        /// </summary>
+        protected override void CleanUp() { deflateEnd(ref _ztream); }
+
+    }
+}

contrib/dotzlib/DotZLib/DotZLib.cs

@@ -0,0 +1,288 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.IO;
+using System.Runtime.InteropServices;
+using System.Text;
+
+
+namespace DotZLib
+{
+
+    #region Internal types
+
+    /// <summary>
+    /// Defines constants for the various flush types used with zlib
+    /// </summary>
+    internal enum FlushTypes
+    {
+        None,  Partial,  Sync,  Full,  Finish,  Block
+    }
+
+    #region ZStream structure
+    // internal mapping of the zlib zstream structure for marshalling
+    [StructLayoutAttribute(LayoutKind.Sequential, Pack=4, Size=0, CharSet=CharSet.Ansi)]
+    internal struct ZStream
+    {
+        public IntPtr next_in;
+        public uint avail_in;
+        public uint total_in;
+
+        public IntPtr next_out;
+        public uint avail_out;
+        public uint total_out;
+
+        [MarshalAs(UnmanagedType.LPStr)]
+        string msg;
+        uint state;
+
+        uint zalloc;
+        uint zfree;
+        uint opaque;
+
+        int data_type;
+        public uint adler;
+        uint reserved;
+    }
+
+    #endregion
+
+    #endregion
+
+    #region Public enums
+    /// <summary>
+    /// Defines constants for the available compression levels in zlib
+    /// </summary>
+    public enum CompressLevel : int
+    {
+        /// <summary>
+        /// The default compression level with a reasonable compromise between compression and speed
+        /// </summary>
+        Default = -1,
+        /// <summary>
+        /// No compression at all. The data are passed straight through.
+        /// </summary>
+        None = 0,
+        /// <summary>
+        /// The maximum compression rate available.
+        /// </summary>
+        Best = 9,
+        /// <summary>
+        /// The fastest available compression level.
+        /// </summary>
+        Fastest = 1
+    }
+    #endregion
+
+    #region Exception classes
+    /// <summary>
+    /// The exception that is thrown when an error occurs on the zlib dll
+    /// </summary>
+    public class ZLibException : ApplicationException
+    {
+        /// <summary>
+        /// Initializes a new instance of the <see cref="ZLibException"/> class with a specified
+        /// error message and error code
+        /// </summary>
+        /// <param name="errorCode">The zlib error code that caused the exception</param>
+        /// <param name="msg">A message that (hopefully) describes the error</param>
+        public ZLibException(int errorCode, string msg) : base(String.Format("ZLib error {0} {1}", errorCode, msg))
+        {
+        }
+
+        /// <summary>
+        /// Initializes a new instance of the <see cref="ZLibException"/> class with a specified
+        /// error code
+        /// </summary>
+        /// <param name="errorCode">The zlib error code that caused the exception</param>
+        public ZLibException(int errorCode) : base(String.Format("ZLib error {0}", errorCode))
+        {
+        }
+    }
+    #endregion
+
+    #region Interfaces
+
+    /// <summary>
+    /// Declares methods and properties that enables a running checksum to be calculated
+    /// </summary>
+    public interface ChecksumGenerator
+    {
+        /// <summary>
+        /// Gets the current value of the checksum
+        /// </summary>
+        uint Value { get; }
+
+        /// <summary>
+        /// Clears the current checksum to 0
+        /// </summary>
+        void Reset();
+
+        /// <summary>
+        /// Updates the current checksum with an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        void Update(byte[] data);
+
+        /// <summary>
+        /// Updates the current checksum with part of an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        /// <param name="offset">Where in <c>data</c> to start updating</param>
+        /// <param name="count">The number of bytes from <c>data</c> to use</param>
+        /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+        /// <exception cref="ArgumentNullException"><c>data</c> is a null reference</exception>
+        /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+        void Update(byte[] data, int offset, int count);
+
+        /// <summary>
+        /// Updates the current checksum with the data from a string
+        /// </summary>
+        /// <param name="data">The string to update the checksum with</param>
+        /// <remarks>The characters in the string are converted by the UTF-8 encoding</remarks>
+        void Update(string data);
+
+        /// <summary>
+        /// Updates the current checksum with the data from a string, using a specific encoding
+        /// </summary>
+        /// <param name="data">The string to update the checksum with</param>
+        /// <param name="encoding">The encoding to use</param>
+        void Update(string data, Encoding encoding);
+    }
+
+
+    /// <summary>
+    /// Represents the method that will be called from a codec when new data
+    /// are available.
+    /// </summary>
+    /// <paramref name="data">The byte array containing the processed data</paramref>
+    /// <paramref name="startIndex">The index of the first processed byte in <c>data</c></paramref>
+    /// <paramref name="count">The number of processed bytes available</paramref>
+    /// <remarks>On return from this method, the data may be overwritten, so grab it while you can.
+    /// You cannot assume that startIndex will be zero.
+    /// </remarks>
+    public delegate void DataAvailableHandler(byte[] data, int startIndex, int count);
+
+    /// <summary>
+    /// Declares methods and events for implementing compressors/decompressors
+    /// </summary>
+    public interface Codec
+    {
+        /// <summary>
+        /// Occurs when more processed data are available.
+        /// </summary>
+        event DataAvailableHandler DataAvailable;
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        void Add(byte[] data);
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+        /// <param name="count">The number of bytes to add</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        void Add(byte[] data, int offset, int count);
+
+        /// <summary>
+        /// Finishes up any pending data that needs to be processed and handled.
+        /// </summary>
+        void Finish();
+
+        /// <summary>
+        /// Gets the checksum of the data that has been added so far
+        /// </summary>
+        uint Checksum { get; }
+
+
+    }
+
+    #endregion
+
+    #region Classes
+    /// <summary>
+    /// Encapsulates general information about the ZLib library
+    /// </summary>
+    public class Info
+    {
+        #region DLL imports
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern uint zlibCompileFlags();
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern string zlibVersion();
+        #endregion
+
+        #region Private stuff
+        private uint _flags;
+
+        // helper function that unpacks a bitsize mask
+        private static int bitSize(uint bits)
+        {
+            switch (bits)
+            {
+                case 0: return 16;
+                case 1: return 32;
+                case 2: return 64;
+            }
+            return -1;
+        }
+        #endregion
+
+        /// <summary>
+        /// Constructs an instance of the <c>Info</c> class.
+        /// </summary>
+        public Info()
+        {
+            _flags = zlibCompileFlags();
+        }
+
+        /// <summary>
+        /// True if the library is compiled with debug info
+        /// </summary>
+        public bool HasDebugInfo { get { return 0 != (_flags & 0x100); } }
+
+        /// <summary>
+        /// True if the library is compiled with assembly optimizations
+        /// </summary>
+        public bool UsesAssemblyCode { get { return 0 != (_flags & 0x200); } }
+
+        /// <summary>
+        /// Gets the size of the unsigned int that was compiled into Zlib
+        /// </summary>
+        public int SizeOfUInt { get { return bitSize(_flags & 3); } }
+
+        /// <summary>
+        /// Gets the size of the unsigned long that was compiled into Zlib
+        /// </summary>
+        public int SizeOfULong { get { return bitSize((_flags >> 2) & 3); } }
+
+        /// <summary>
+        /// Gets the size of the pointers that were compiled into Zlib
+        /// </summary>
+        public int SizeOfPointer { get { return bitSize((_flags >> 4) & 3); } }
+
+        /// <summary>
+        /// Gets the size of the z_off_t type that was compiled into Zlib
+        /// </summary>
+        public int SizeOfOffset { get { return bitSize((_flags >> 6) & 3); } }
+
+        /// <summary>
+        /// Gets the version of ZLib as a string, e.g. "1.2.1"
+        /// </summary>
+        public static string Version { get { return zlibVersion(); } }
+    }
+
+    #endregion
+
+}

contrib/dotzlib/DotZLib/DotZLib.csproj

@@ -0,0 +1,141 @@
+<VisualStudioProject>
+    <CSHARP
+        ProjectType = "Local"
+        ProductVersion = "7.10.3077"
+        SchemaVersion = "2.0"
+        ProjectGuid = "{BB1EE0B1-1808-46CB-B786-949D91117FC5}"
+    >
+        <Build>
+            <Settings
+                ApplicationIcon = ""
+                AssemblyKeyContainerName = ""
+                AssemblyName = "DotZLib"
+                AssemblyOriginatorKeyFile = ""
+                DefaultClientScript = "JScript"
+                DefaultHTMLPageLayout = "Grid"
+                DefaultTargetSchema = "IE50"
+                DelaySign = "false"
+                OutputType = "Library"
+                PreBuildEvent = ""
+                PostBuildEvent = ""
+                RootNamespace = "DotZLib"
+                RunPostBuildEvent = "OnBuildSuccess"
+                StartupObject = ""
+            >
+                <Config
+                    Name = "Debug"
+                    AllowUnsafeBlocks = "false"
+                    BaseAddress = "285212672"
+                    CheckForOverflowUnderflow = "false"
+                    ConfigurationOverrideFile = ""
+                    DefineConstants = "DEBUG;TRACE"
+                    DocumentationFile = "docs\DotZLib.xml"
+                    DebugSymbols = "true"
+                    FileAlignment = "4096"
+                    IncrementalBuild = "false"
+                    NoStdLib = "false"
+                    NoWarn = "1591"
+                    Optimize = "false"
+                    OutputPath = "bin\Debug\"
+                    RegisterForComInterop = "false"
+                    RemoveIntegerChecks = "false"
+                    TreatWarningsAsErrors = "false"
+                    WarningLevel = "4"
+                />
+                <Config
+                    Name = "Release"
+                    AllowUnsafeBlocks = "false"
+                    BaseAddress = "285212672"
+                    CheckForOverflowUnderflow = "false"
+                    ConfigurationOverrideFile = ""
+                    DefineConstants = "TRACE"
+                    DocumentationFile = "docs\DotZLib.xml"
+                    DebugSymbols = "false"
+                    FileAlignment = "4096"
+                    IncrementalBuild = "false"
+                    NoStdLib = "false"
+                    NoWarn = ""
+                    Optimize = "true"
+                    OutputPath = "bin\Release\"
+                    RegisterForComInterop = "false"
+                    RemoveIntegerChecks = "false"
+                    TreatWarningsAsErrors = "false"
+                    WarningLevel = "4"
+                />
+            </Settings>
+            <References>
+                <Reference
+                    Name = "System"
+                    AssemblyName = "System"
+                    HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\System.dll"
+                />
+                <Reference
+                    Name = "System.Data"
+                    AssemblyName = "System.Data"
+                    HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\System.Data.dll"
+                />
+                <Reference
+                    Name = "System.XML"
+                    AssemblyName = "System.Xml"
+                    HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\System.XML.dll"
+                />
+                <Reference
+                    Name = "nunit.framework"
+                    AssemblyName = "nunit.framework"
+                    HintPath = "E:\apps\NUnit V2.1\\bin\nunit.framework.dll"
+                    AssemblyFolderKey = "hklm\dn\nunit.framework"
+                />
+            </References>
+        </Build>
+        <Files>
+            <Include>
+                <File
+                    RelPath = "AssemblyInfo.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "ChecksumImpl.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "CircularBuffer.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "CodecBase.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "Deflater.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "DotZLib.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "GZipStream.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "Inflater.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "UnitTests.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+            </Include>
+        </Files>
+    </CSHARP>
+</VisualStudioProject>
+

contrib/dotzlib/DotZLib/GZipStream.cs

@@ -0,0 +1,301 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.IO;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+	/// <summary>
+	/// Implements a compressed <see cref="Stream"/>, in GZip (.gz) format.
+	/// </summary>
+	public class GZipStream : Stream, IDisposable
+	{
+        #region Dll Imports
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)]
+        private static extern IntPtr gzopen(string name, string mode);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzclose(IntPtr gzFile);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzwrite(IntPtr gzFile, int data, int length);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzread(IntPtr gzFile, int data, int length);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzgetc(IntPtr gzFile);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzputc(IntPtr gzFile, int c);
+
+        #endregion
+
+        #region Private data
+        private IntPtr _gzFile;
+        private bool _isDisposed = false;
+        private bool _isWriting;
+        #endregion
+
+        #region Constructors
+        /// <summary>
+        /// Creates a new file as a writeable GZipStream
+        /// </summary>
+        /// <param name="fileName">The name of the compressed file to create</param>
+        /// <param name="level">The compression level to use when adding data</param>
+        /// <exception cref="ZLibException">If an error occurred in the internal zlib function</exception>
+		public GZipStream(string fileName, CompressLevel level)
+		{
+            _isWriting = true;
+            _gzFile = gzopen(fileName, String.Format("wb{0}", (int)level));
+            if (_gzFile == IntPtr.Zero)
+                throw new ZLibException(-1, "Could not open " + fileName);
+		}
+
+        /// <summary>
+        /// Opens an existing file as a readable GZipStream
+        /// </summary>
+        /// <param name="fileName">The name of the file to open</param>
+        /// <exception cref="ZLibException">If an error occurred in the internal zlib function</exception>
+        public GZipStream(string fileName)
+        {
+            _isWriting = false;
+            _gzFile = gzopen(fileName, "rb");
+            if (_gzFile == IntPtr.Zero)
+                throw new ZLibException(-1, "Could not open " + fileName);
+
+        }
+        #endregion
+
+        #region Access properties
+        /// <summary>
+        /// Returns true of this stream can be read from, false otherwise
+        /// </summary>
+        public override bool CanRead
+        {
+            get
+            {
+                return !_isWriting;
+            }
+        }
+
+
+        /// <summary>
+        /// Returns false.
+        /// </summary>
+        public override bool CanSeek
+        {
+            get
+            {
+                return false;
+            }
+        }
+
+        /// <summary>
+        /// Returns true if this tsream is writeable, false otherwise
+        /// </summary>
+        public override bool CanWrite
+        {
+            get
+            {
+                return _isWriting;
+            }
+        }
+        #endregion
+
+        #region Destructor & IDispose stuff
+
+        /// <summary>
+        /// Destroys this instance
+        /// </summary>
+        ~GZipStream()
+        {
+            cleanUp(false);
+        }
+
+        /// <summary>
+        /// Closes the external file handle
+        /// </summary>
+        public void Dispose()
+        {
+            cleanUp(true);
+        }
+
+        // Does the actual closing of the file handle.
+        private void cleanUp(bool isDisposing)
+        {
+            if (!_isDisposed)
+            {
+                gzclose(_gzFile);
+                _isDisposed = true;
+            }
+        }
+        #endregion
+
+        #region Basic reading and writing
+        /// <summary>
+        /// Attempts to read a number of bytes from the stream.
+        /// </summary>
+        /// <param name="buffer">The destination data buffer</param>
+        /// <param name="offset">The index of the first destination byte in <c>buffer</c></param>
+        /// <param name="count">The number of bytes requested</param>
+        /// <returns>The number of bytes read</returns>
+        /// <exception cref="ArgumentNullException">If <c>buffer</c> is null</exception>
+        /// <exception cref="ArgumentOutOfRangeException">If <c>count</c> or <c>offset</c> are negative</exception>
+        /// <exception cref="ArgumentException">If <c>offset</c>  + <c>count</c> is &gt; buffer.Length</exception>
+        /// <exception cref="NotSupportedException">If this stream is not readable.</exception>
+        /// <exception cref="ObjectDisposedException">If this stream has been disposed.</exception>
+        public override int Read(byte[] buffer, int offset, int count)
+        {
+            if (!CanRead) throw new NotSupportedException();
+            if (buffer == null) throw new ArgumentNullException();
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > buffer.Length) throw new ArgumentException();
+            if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+
+            GCHandle h = GCHandle.Alloc(buffer, GCHandleType.Pinned);
+            int result;
+            try
+            {
+                result = gzread(_gzFile, h.AddrOfPinnedObject().ToInt32() + offset, count);
+                if (result < 0)
+                    throw new IOException();
+            }
+            finally
+            {
+                h.Free();
+            }
+            return result;
+        }
+
+        /// <summary>
+        /// Attempts to read a single byte from the stream.
+        /// </summary>
+        /// <returns>The byte that was read, or -1 in case of error or End-Of-File</returns>
+        public override int ReadByte()
+        {
+            if (!CanRead) throw new NotSupportedException();
+            if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+            return gzgetc(_gzFile);
+        }
+
+        /// <summary>
+        /// Writes a number of bytes to the stream
+        /// </summary>
+        /// <param name="buffer"></param>
+        /// <param name="offset"></param>
+        /// <param name="count"></param>
+        /// <exception cref="ArgumentNullException">If <c>buffer</c> is null</exception>
+        /// <exception cref="ArgumentOutOfRangeException">If <c>count</c> or <c>offset</c> are negative</exception>
+        /// <exception cref="ArgumentException">If <c>offset</c>  + <c>count</c> is &gt; buffer.Length</exception>
+        /// <exception cref="NotSupportedException">If this stream is not writeable.</exception>
+        /// <exception cref="ObjectDisposedException">If this stream has been disposed.</exception>
+        public override void Write(byte[] buffer, int offset, int count)
+        {
+            if (!CanWrite) throw new NotSupportedException();
+            if (buffer == null) throw new ArgumentNullException();
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > buffer.Length) throw new ArgumentException();
+            if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+
+            GCHandle h = GCHandle.Alloc(buffer, GCHandleType.Pinned);
+            try
+            {
+                int result = gzwrite(_gzFile, h.AddrOfPinnedObject().ToInt32() + offset, count);
+                if (result < 0)
+                    throw new IOException();
+            }
+            finally
+            {
+                h.Free();
+            }
+        }
+
+        /// <summary>
+        /// Writes a single byte to the stream
+        /// </summary>
+        /// <param name="value">The byte to add to the stream.</param>
+        /// <exception cref="NotSupportedException">If this stream is not writeable.</exception>
+        /// <exception cref="ObjectDisposedException">If this stream has been disposed.</exception>
+        public override void WriteByte(byte value)
+        {
+            if (!CanWrite) throw new NotSupportedException();
+            if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+
+            int result = gzputc(_gzFile, (int)value);
+            if (result < 0)
+                throw new IOException();
+        }
+        #endregion
+
+        #region Position & length stuff
+        /// <summary>
+        /// Not supported.
+        /// </summary>
+        /// <param name="value"></param>
+        /// <exception cref="NotSupportedException">Always thrown</exception>
+        public override void SetLength(long value)
+        {
+            throw new NotSupportedException();
+        }
+
+        /// <summary>
+        ///  Not suppported.
+        /// </summary>
+        /// <param name="offset"></param>
+        /// <param name="origin"></param>
+        /// <returns></returns>
+        /// <exception cref="NotSupportedException">Always thrown</exception>
+        public override long Seek(long offset, SeekOrigin origin)
+        {
+            throw new NotSupportedException();
+        }
+
+        /// <summary>
+        /// Flushes the <c>GZipStream</c>.
+        /// </summary>
+        /// <remarks>In this implementation, this method does nothing. This is because excessive
+        /// flushing may degrade the achievable compression rates.</remarks>
+        public override void Flush()
+        {
+            // left empty on purpose
+        }
+
+        /// <summary>
+        /// Gets/sets the current position in the <c>GZipStream</c>. Not suppported.
+        /// </summary>
+        /// <remarks>In this implementation this property is not supported</remarks>
+        /// <exception cref="NotSupportedException">Always thrown</exception>
+        public override long Position
+        {
+            get
+            {
+                throw new NotSupportedException();
+            }
+            set
+            {
+                throw new NotSupportedException();
+            }
+        }
+
+        /// <summary>
+        /// Gets the size of the stream. Not suppported.
+        /// </summary>
+        /// <remarks>In this implementation this property is not supported</remarks>
+        /// <exception cref="NotSupportedException">Always thrown</exception>
+        public override long Length
+        {
+            get
+            {
+                throw new NotSupportedException();
+            }
+        }
+        #endregion
+    }
+}

contrib/dotzlib/DotZLib/Inflater.cs

@@ -0,0 +1,105 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Diagnostics;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+
+    /// <summary>
+    /// Implements a data decompressor, using the inflate algorithm in the ZLib dll
+    /// </summary>
+    public class Inflater : CodecBase
+	{
+        #region Dll imports
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)]
+        private static extern int inflateInit_(ref ZStream sz, string vs, int size);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int inflate(ref ZStream sz, int flush);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int inflateReset(ref ZStream sz);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int inflateEnd(ref ZStream sz);
+        #endregion
+
+        /// <summary>
+        /// Constructs an new instance of the <c>Inflater</c>
+        /// </summary>
+        public Inflater() : base()
+		{
+            int retval = inflateInit_(ref _ztream, Info.Version, Marshal.SizeOf(_ztream));
+            if (retval != 0)
+                throw new ZLibException(retval, "Could not initialize inflater");
+
+            resetOutput();
+        }
+
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+        /// <param name="count">The number of bytes to add</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        public override void Add(byte[] data, int offset, int count)
+        {
+            if (data == null) throw new ArgumentNullException();
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > data.Length) throw new ArgumentException();
+
+            int total = count;
+            int inputIndex = offset;
+            int err = 0;
+
+            while (err >= 0 && inputIndex < total)
+            {
+                copyInput(data, inputIndex, Math.Min(total - inputIndex, kBufferSize));
+                err = inflate(ref _ztream, (int)FlushTypes.None);
+                if (err == 0)
+                    while (_ztream.avail_out == 0)
+                    {
+                        OnDataAvailable();
+                        err = inflate(ref _ztream, (int)FlushTypes.None);
+                    }
+
+                inputIndex += (int)_ztream.total_in;
+            }
+            setChecksum( _ztream.adler );
+        }
+
+
+        /// <summary>
+        /// Finishes up any pending data that needs to be processed and handled.
+        /// </summary>
+        public override void Finish()
+        {
+            int err;
+            do
+            {
+                err = inflate(ref _ztream, (int)FlushTypes.Finish);
+                OnDataAvailable();
+            }
+            while (err == 0);
+            setChecksum( _ztream.adler );
+            inflateReset(ref _ztream);
+            resetOutput();
+        }
+
+        /// <summary>
+        /// Closes the internal zlib inflate stream
+        /// </summary>
+        protected override void CleanUp() { inflateEnd(ref _ztream); }
+
+
+	}
+}

contrib/dotzlib/DotZLib/UnitTests.cs

@@ -0,0 +1,274 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Collections;
+using System.IO;
+
+// uncomment the define below to include unit tests
+//#define nunit
+#if nunit
+using NUnit.Framework;
+
+// Unit tests for the DotZLib class library
+// ----------------------------------------
+//
+// Use this with NUnit 2 from http://www.nunit.org
+//
+
+namespace DotZLibTests
+{
+    using DotZLib;
+
+    // helper methods
+    internal class Utils
+    {
+        public static bool byteArrEqual( byte[] lhs, byte[] rhs )
+        {
+            if (lhs.Length != rhs.Length)
+                return false;
+            for (int i = lhs.Length-1; i >= 0; --i)
+                if (lhs[i] != rhs[i])
+                    return false;
+            return true;
+        }
+
+    }
+
+
+    [TestFixture]
+    public class CircBufferTests
+    {
+        #region Circular buffer tests
+        [Test]
+        public void SinglePutGet()
+        {
+            CircularBuffer buf = new CircularBuffer(10);
+            Assert.AreEqual( 0, buf.Size );
+            Assert.AreEqual( -1, buf.Get() );
+
+            Assert.IsTrue(buf.Put( 1 ));
+            Assert.AreEqual( 1, buf.Size );
+            Assert.AreEqual( 1, buf.Get() );
+            Assert.AreEqual( 0, buf.Size );
+            Assert.AreEqual( -1, buf.Get() );
+        }
+
+        [Test]
+        public void BlockPutGet()
+        {
+            CircularBuffer buf = new CircularBuffer(10);
+            byte[] arr = {1,2,3,4,5,6,7,8,9,10};
+            Assert.AreEqual( 10, buf.Put(arr,0,10) );
+            Assert.AreEqual( 10, buf.Size );
+            Assert.IsFalse( buf.Put(11) );
+            Assert.AreEqual( 1, buf.Get() );
+            Assert.IsTrue( buf.Put(11) );
+
+            byte[] arr2 = (byte[])arr.Clone();
+            Assert.AreEqual( 9, buf.Get(arr2,1,9) );
+            Assert.IsTrue( Utils.byteArrEqual(arr,arr2) );
+        }
+
+        #endregion
+    }
+
+    [TestFixture]
+    public class ChecksumTests
+    {
+        #region CRC32 Tests
+        [Test]
+        public void CRC32_Null()
+        {
+            CRC32Checksum crc32 = new CRC32Checksum();
+            Assert.AreEqual( 0, crc32.Value );
+
+            crc32 = new CRC32Checksum(1);
+            Assert.AreEqual( 1, crc32.Value );
+
+            crc32 = new CRC32Checksum(556);
+            Assert.AreEqual( 556, crc32.Value );
+        }
+
+        [Test]
+        public void CRC32_Data()
+        {
+            CRC32Checksum crc32 = new CRC32Checksum();
+            byte[] data = { 1,2,3,4,5,6,7 };
+            crc32.Update(data);
+            Assert.AreEqual( 0x70e46888, crc32.Value  );
+
+            crc32 = new CRC32Checksum();
+            crc32.Update("penguin");
+            Assert.AreEqual( 0x0e5c1a120, crc32.Value );
+
+            crc32 = new CRC32Checksum(1);
+            crc32.Update("penguin");
+            Assert.AreEqual(0x43b6aa94, crc32.Value);
+
+        }
+        #endregion
+
+        #region Adler tests
+
+        [Test]
+        public void Adler_Null()
+        {
+            AdlerChecksum adler = new AdlerChecksum();
+            Assert.AreEqual(0, adler.Value);
+
+            adler = new AdlerChecksum(1);
+            Assert.AreEqual( 1, adler.Value );
+
+            adler = new AdlerChecksum(556);
+            Assert.AreEqual( 556, adler.Value );
+        }
+
+        [Test]
+        public void Adler_Data()
+        {
+            AdlerChecksum adler = new AdlerChecksum(1);
+            byte[] data = { 1,2,3,4,5,6,7 };
+            adler.Update(data);
+            Assert.AreEqual( 0x5b001d, adler.Value  );
+
+            adler = new AdlerChecksum();
+            adler.Update("penguin");
+            Assert.AreEqual(0x0bcf02f6, adler.Value );
+
+            adler = new AdlerChecksum(1);
+            adler.Update("penguin");
+            Assert.AreEqual(0x0bd602f7, adler.Value);
+
+        }
+        #endregion
+    }
+
+    [TestFixture]
+    public class InfoTests
+    {
+        #region Info tests
+        [Test]
+        public void Info_Version()
+        {
+            Info info = new Info();
+            Assert.AreEqual("1.2.5", Info.Version);
+            Assert.AreEqual(32, info.SizeOfUInt);
+            Assert.AreEqual(32, info.SizeOfULong);
+            Assert.AreEqual(32, info.SizeOfPointer);
+            Assert.AreEqual(32, info.SizeOfOffset);
+        }
+        #endregion
+    }
+
+    [TestFixture]
+    public class DeflateInflateTests
+    {
+        #region Deflate tests
+        [Test]
+        public void Deflate_Init()
+        {
+            using (Deflater def = new Deflater(CompressLevel.Default))
+            {
+            }
+        }
+
+        private ArrayList compressedData = new ArrayList();
+        private uint adler1;
+
+        private ArrayList uncompressedData = new ArrayList();
+        private uint adler2;
+
+        public void CDataAvail(byte[] data, int startIndex, int count)
+        {
+            for (int i = 0; i < count; ++i)
+                compressedData.Add(data[i+startIndex]);
+        }
+
+        [Test]
+        public void Deflate_Compress()
+        {
+            compressedData.Clear();
+
+            byte[] testData = new byte[35000];
+            for (int i = 0; i < testData.Length; ++i)
+                testData[i] = 5;
+
+            using (Deflater def = new Deflater((CompressLevel)5))
+            {
+                def.DataAvailable += new DataAvailableHandler(CDataAvail);
+                def.Add(testData);
+                def.Finish();
+                adler1 = def.Checksum;
+            }
+        }
+        #endregion
+
+        #region Inflate tests
+        [Test]
+        public void Inflate_Init()
+        {
+            using (Inflater inf = new Inflater())
+            {
+            }
+        }
+
+        private void DDataAvail(byte[] data, int startIndex, int count)
+        {
+            for (int i = 0; i < count; ++i)
+                uncompressedData.Add(data[i+startIndex]);
+        }
+
+        [Test]
+        public void Inflate_Expand()
+        {
+            uncompressedData.Clear();
+
+            using (Inflater inf = new Inflater())
+            {
+                inf.DataAvailable += new DataAvailableHandler(DDataAvail);
+                inf.Add((byte[])compressedData.ToArray(typeof(byte)));
+                inf.Finish();
+                adler2 = inf.Checksum;
+            }
+            Assert.AreEqual( adler1, adler2 );
+        }
+        #endregion
+    }
+
+    [TestFixture]
+    public class GZipStreamTests
+    {
+        #region GZipStream test
+        [Test]
+        public void GZipStream_WriteRead()
+        {
+            using (GZipStream gzOut = new GZipStream("gzstream.gz", CompressLevel.Best))
+            {
+                BinaryWriter writer = new BinaryWriter(gzOut);
+                writer.Write("hi there");
+                writer.Write(Math.PI);
+                writer.Write(42);
+            }
+
+            using (GZipStream gzIn = new GZipStream("gzstream.gz"))
+            {
+                BinaryReader reader = new BinaryReader(gzIn);
+                string s = reader.ReadString();
+                Assert.AreEqual("hi there",s);
+                double d = reader.ReadDouble();
+                Assert.AreEqual(Math.PI, d);
+                int i = reader.ReadInt32();
+                Assert.AreEqual(42,i);
+            }
+
+        }
+        #endregion
+	}
+}
+
+#endif

contrib/dotzlib/LICENSE_1_0.txt

@@ -0,0 +1,23 @@
+Boost Software License - Version 1.0 - August 17th, 2003
+
+Permission is hereby granted, free of charge, to any person or organization
+obtaining a copy of the software and accompanying documentation covered by
+this license (the "Software") to use, reproduce, display, distribute,
+execute, and transmit the Software, and to prepare derivative works of the
+Software, and to permit third-parties to whom the Software is furnished to
+do so, all subject to the following:
+
+The copyright notices in the Software and this entire statement, including
+the above license grant, this restriction and the following disclaimer,
+must be included in all copies of the Software, in whole or in part, and
+all derivative works of the Software, unless such copies or derivative
+works are solely in the form of machine-executable object code generated by
+a source language processor.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT
+SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE
+FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE,
+ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+DEALINGS IN THE SOFTWARE.

contrib/dotzlib/readme.txt

@@ -0,0 +1,58 @@
+This directory contains a .Net wrapper class library for the ZLib1.dll
+
+The wrapper includes support for inflating/deflating memory buffers,
+.Net streaming wrappers for the gz streams part of zlib, and wrappers
+for the checksum parts of zlib. See DotZLib/UnitTests.cs for examples.
+
+Directory structure:
+--------------------
+
+LICENSE_1_0.txt       - License file.
+readme.txt            - This file.
+DotZLib.chm           - Class library documentation
+DotZLib.build         - NAnt build file
+DotZLib.sln           - Microsoft Visual Studio 2003 solution file
+
+DotZLib\*.cs          - Source files for the class library
+
+Unit tests:
+-----------
+The file DotZLib/UnitTests.cs contains unit tests for use with NUnit 2.1 or higher.
+To include unit tests in the build, define nunit before building.
+
+
+Build instructions:
+-------------------
+
+1. Using Visual Studio.Net 2003:
+   Open DotZLib.sln in VS.Net and build from there. Output file (DotZLib.dll)
+   will be found ./DotZLib/bin/release or ./DotZLib/bin/debug, depending on
+   you are building the release or debug version of the library. Check
+   DotZLib/UnitTests.cs for instructions on how to include unit tests in the
+   build.
+
+2. Using NAnt:
+   Open a command prompt with access to the build environment and run nant
+   in the same directory as the DotZLib.build file.
+   You can define 2 properties on the nant command-line to control the build:
+   debug={true|false} to toggle between release/debug builds (default=true).
+   nunit={true|false} to include or esclude unit tests (default=true).
+   Also the target clean will remove binaries.
+   Output file (DotZLib.dll) will be found in either ./DotZLib/bin/release
+   or ./DotZLib/bin/debug, depending on whether you are building the release
+   or debug version of the library.
+
+   Examples:
+     nant -D:debug=false -D:nunit=false
+       will build a release mode version of the library without unit tests.
+     nant
+       will build a debug version of the library with unit tests
+     nant clean
+       will remove all previously built files.
+
+
+---------------------------------
+Copyright (c) Henrik Ravn 2004
+
+Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+(See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)

contrib/gcc_gvmat64/gvmat64.S

@@ -0,0 +1,574 @@
+/*
+;uInt longest_match_x64(
+;    deflate_state *s,
+;    IPos cur_match);                             // current match 
+
+; gvmat64.S -- Asm portion of the optimized longest_match for 32 bits x86_64
+;  (AMD64 on Athlon 64, Opteron, Phenom
+;     and Intel EM64T on Pentium 4 with EM64T, Pentium D, Core 2 Duo, Core I5/I7)
+; this file is translation from gvmat64.asm to GCC 4.x (for Linux, Mac XCode)
+; Copyright (C) 1995-2010 Jean-loup Gailly, Brian Raiter and Gilles Vollant.
+;
+; File written by Gilles Vollant, by converting to assembly the longest_match
+;  from Jean-loup Gailly in deflate.c of zLib and infoZip zip.
+;  and by taking inspiration on asm686 with masm, optimised assembly code
+;        from Brian Raiter, written 1998
+;
+;  This software is provided 'as-is', without any express or implied
+;  warranty.  In no event will the authors be held liable for any damages
+;  arising from the use of this software.
+;
+;  Permission is granted to anyone to use this software for any purpose,
+;  including commercial applications, and to alter it and redistribute it
+;  freely, subject to the following restrictions:
+;
+;  1. The origin of this software must not be misrepresented; you must not
+;     claim that you wrote the original software. If you use this software
+;     in a product, an acknowledgment in the product documentation would be
+;     appreciated but is not required.
+;  2. Altered source versions must be plainly marked as such, and must not be
+;     misrepresented as being the original software
+;  3. This notice may not be removed or altered from any source distribution.
+;
+;         http://www.zlib.net
+;         http://www.winimage.com/zLibDll
+;         http://www.muppetlabs.com/~breadbox/software/assembly.html
+;
+; to compile this file for zLib, I use option:
+;   gcc -c -arch x86_64 gvmat64.S
+
+
+;uInt longest_match(s, cur_match)
+;    deflate_state *s;
+;    IPos cur_match;                             // current match /
+;
+; with XCode for Mac, I had strange error with some jump on intel syntax
+; this is why BEFORE_JMP and AFTER_JMP are used
+ */
+
+
+#define BEFORE_JMP .att_syntax
+#define AFTER_JMP .intel_syntax noprefix
+
+#ifndef NO_UNDERLINE
+#	define	match_init	_match_init
+#	define	longest_match	_longest_match
+#endif
+
+.intel_syntax noprefix
+
+.globl	match_init, longest_match
+.text
+longest_match:
+
+
+
+#define LocalVarsSize 96
+/*
+; register used : rax,rbx,rcx,rdx,rsi,rdi,r8,r9,r10,r11,r12
+; free register :  r14,r15
+; register can be saved : rsp
+*/
+
+#define chainlenwmask     (rsp + 8 - LocalVarsSize)
+#define nicematch         (rsp + 16 - LocalVarsSize)
+
+#define save_rdi        (rsp + 24 - LocalVarsSize)
+#define save_rsi        (rsp + 32 - LocalVarsSize)
+#define save_rbx        (rsp + 40 - LocalVarsSize)
+#define save_rbp        (rsp + 48 - LocalVarsSize)
+#define save_r12        (rsp + 56 - LocalVarsSize)
+#define save_r13        (rsp + 64 - LocalVarsSize)
+#define save_r14        (rsp + 72 - LocalVarsSize)
+#define save_r15        (rsp + 80 - LocalVarsSize)
+
+
+/*
+;  all the +4 offsets are due to the addition of pending_buf_size (in zlib
+;  in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, remove the +4).
+;  Note : these value are good with a 8 bytes boundary pack structure
+*/
+
+#define    MAX_MATCH              258
+#define    MIN_MATCH              3
+#define    MIN_LOOKAHEAD          (MAX_MATCH+MIN_MATCH+1)
+
+/*
+;;; Offsets for fields in the deflate_state structure. These numbers
+;;; are calculated from the definition of deflate_state, with the
+;;; assumption that the compiler will dword-align the fields. (Thus,
+;;; changing the definition of deflate_state could easily cause this
+;;; program to crash horribly, without so much as a warning at
+;;; compile time. Sigh.)
+
+;  all the +zlib1222add offsets are due to the addition of fields
+;  in zlib in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+;  (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+;  if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
+*/
+
+
+
+/* you can check the structure offset by running
+
+#include <stdlib.h>
+#include <stdio.h>
+#include "deflate.h"
+
+void print_depl()
+{
+deflate_state ds;
+deflate_state *s=&ds;
+printf("size pointer=%u\n",(int)sizeof(void*));
+
+printf("#define dsWSize         %u\n",(int)(((char*)&(s->w_size))-((char*)s)));
+printf("#define dsWMask         %u\n",(int)(((char*)&(s->w_mask))-((char*)s)));
+printf("#define dsWindow        %u\n",(int)(((char*)&(s->window))-((char*)s)));
+printf("#define dsPrev          %u\n",(int)(((char*)&(s->prev))-((char*)s)));
+printf("#define dsMatchLen      %u\n",(int)(((char*)&(s->match_length))-((char*)s)));
+printf("#define dsPrevMatch     %u\n",(int)(((char*)&(s->prev_match))-((char*)s)));
+printf("#define dsStrStart      %u\n",(int)(((char*)&(s->strstart))-((char*)s)));
+printf("#define dsMatchStart    %u\n",(int)(((char*)&(s->match_start))-((char*)s)));
+printf("#define dsLookahead     %u\n",(int)(((char*)&(s->lookahead))-((char*)s)));
+printf("#define dsPrevLen       %u\n",(int)(((char*)&(s->prev_length))-((char*)s)));
+printf("#define dsMaxChainLen   %u\n",(int)(((char*)&(s->max_chain_length))-((char*)s)));
+printf("#define dsGoodMatch     %u\n",(int)(((char*)&(s->good_match))-((char*)s)));
+printf("#define dsNiceMatch     %u\n",(int)(((char*)&(s->nice_match))-((char*)s)));
+}
+*/
+
+#define dsWSize          68
+#define dsWMask          76
+#define dsWindow         80
+#define dsPrev           96
+#define dsMatchLen       144
+#define dsPrevMatch      148
+#define dsStrStart       156
+#define dsMatchStart     160
+#define dsLookahead      164
+#define dsPrevLen        168
+#define dsMaxChainLen    172
+#define dsGoodMatch      188
+#define dsNiceMatch      192
+
+#define window_size      [ rcx + dsWSize]
+#define WMask            [ rcx + dsWMask]
+#define window_ad        [ rcx + dsWindow]
+#define prev_ad          [ rcx + dsPrev]
+#define strstart         [ rcx + dsStrStart]
+#define match_start      [ rcx + dsMatchStart]
+#define Lookahead        [ rcx + dsLookahead] //; 0ffffffffh on infozip
+#define prev_length      [ rcx + dsPrevLen]
+#define max_chain_length [ rcx + dsMaxChainLen]
+#define good_match       [ rcx + dsGoodMatch]
+#define nice_match       [ rcx + dsNiceMatch]
+
+/*
+; windows:
+; parameter 1 in rcx(deflate state s), param 2 in rdx (cur match)
+
+; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and
+; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp
+;
+; All registers must be preserved across the call, except for
+;   rax, rcx, rdx, r8, r9, r10, and r11, which are scratch.
+
+;
+; gcc on macosx-linux:
+; see http://www.x86-64.org/documentation/abi-0.99.pdf
+; param 1 in rdi, param 2 in rsi
+; rbx, rsp, rbp, r12 to r15 must be preserved
+
+;;; Save registers that the compiler may be using, and adjust esp to
+;;; make room for our stack frame.
+
+
+;;; Retrieve the function arguments. r8d will hold cur_match
+;;; throughout the entire function. edx will hold the pointer to the
+;;; deflate_state structure during the function's setup (before
+;;; entering the main loop.
+
+; ms: parameter 1 in rcx (deflate_state* s), param 2 in edx -> r8 (cur match)
+; mac: param 1 in rdi, param 2 rsi
+; this clear high 32 bits of r8, which can be garbage in both r8 and rdx
+*/
+        mov [save_rbx],rbx
+        mov [save_rbp],rbp
+
+
+        mov rcx,rdi
+
+        mov r8d,esi
+
+
+        mov [save_r12],r12
+        mov [save_r13],r13
+        mov [save_r14],r14
+        mov [save_r15],r15
+
+
+//;;; uInt wmask = s->w_mask;
+//;;; unsigned chain_length = s->max_chain_length;
+//;;; if (s->prev_length >= s->good_match) {
+//;;;     chain_length >>= 2;
+//;;; }
+
+
+        mov edi, prev_length
+        mov esi, good_match
+        mov eax, WMask
+        mov ebx, max_chain_length
+        cmp edi, esi
+        jl  LastMatchGood
+        shr ebx, 2
+LastMatchGood:
+
+//;;; chainlen is decremented once beforehand so that the function can
+//;;; use the sign flag instead of the zero flag for the exit test.
+//;;; It is then shifted into the high word, to make room for the wmask
+//;;; value, which it will always accompany.
+
+        dec ebx
+        shl ebx, 16
+        or  ebx, eax
+
+//;;; on zlib only
+//;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+
+
+        mov eax, nice_match
+        mov [chainlenwmask], ebx
+        mov r10d, Lookahead
+        cmp r10d, eax
+        cmovnl r10d, eax
+        mov [nicematch],r10d
+
+
+
+//;;; register Bytef *scan = s->window + s->strstart;
+        mov r10, window_ad
+        mov ebp, strstart
+        lea r13, [r10 + rbp]
+
+//;;; Determine how many bytes the scan ptr is off from being
+//;;; dword-aligned.
+
+         mov r9,r13
+         neg r13
+         and r13,3
+
+//;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+//;;;     s->strstart - (IPos)MAX_DIST(s) : NIL;
+
+
+        mov eax, window_size
+        sub eax, MIN_LOOKAHEAD
+
+
+        xor edi,edi
+        sub ebp, eax
+
+        mov r11d, prev_length
+
+        cmovng ebp,edi
+
+//;;; int best_len = s->prev_length;
+
+
+//;;; Store the sum of s->window + best_len in esi locally, and in esi.
+
+       lea  rsi,[r10+r11]
+
+//;;; register ush scan_start = *(ushf*)scan;
+//;;; register ush scan_end   = *(ushf*)(scan+best_len-1);
+//;;; Posf *prev = s->prev;
+
+        movzx r12d,word ptr [r9]
+        movzx ebx, word ptr [r9 + r11 - 1]
+
+        mov rdi, prev_ad
+
+//;;; Jump into the main loop.
+
+        mov edx, [chainlenwmask]
+
+        cmp bx,word ptr [rsi + r8 - 1]
+        jz  LookupLoopIsZero
+				
+						
+						
+LookupLoop1:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+		
+		
+		
+        sub edx, 0x00010000
+		BEFORE_JMP
+        js  LeaveNow
+		AFTER_JMP
+
+LoopEntry1:
+        cmp bx,word ptr [rsi + r8 - 1]
+		BEFORE_JMP
+        jz  LookupLoopIsZero
+		AFTER_JMP
+
+LookupLoop2:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+		BEFORE_JMP
+        jbe LeaveNow
+		AFTER_JMP
+        sub edx, 0x00010000
+		BEFORE_JMP
+        js  LeaveNow
+		AFTER_JMP
+
+LoopEntry2:
+        cmp bx,word ptr [rsi + r8 - 1]
+		BEFORE_JMP
+        jz  LookupLoopIsZero
+		AFTER_JMP
+
+LookupLoop4:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+		BEFORE_JMP
+        jbe LeaveNow
+		AFTER_JMP
+        sub edx, 0x00010000
+		BEFORE_JMP
+        js  LeaveNow
+		AFTER_JMP
+
+LoopEntry4:
+
+        cmp bx,word ptr [rsi + r8 - 1]
+		BEFORE_JMP
+        jnz LookupLoop1
+        jmp LookupLoopIsZero
+		AFTER_JMP
+/*
+;;; do {
+;;;     match = s->window + cur_match;
+;;;     if (*(ushf*)(match+best_len-1) != scan_end ||
+;;;         *(ushf*)match != scan_start) continue;
+;;;     [...]
+;;; } while ((cur_match = prev[cur_match & wmask]) > limit
+;;;          && --chain_length != 0);
+;;;
+;;; Here is the inner loop of the function. The function will spend the
+;;; majority of its time in this loop, and majority of that time will
+;;; be spent in the first ten instructions.
+;;;
+;;; Within this loop:
+;;; ebx = scanend
+;;; r8d = curmatch
+;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
+;;; esi = windowbestlen - i.e., (window + bestlen)
+;;; edi = prev
+;;; ebp = limit
+*/
+.balign 16
+LookupLoop:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+		BEFORE_JMP
+        jbe LeaveNow
+		AFTER_JMP
+        sub edx, 0x00010000
+		BEFORE_JMP
+        js  LeaveNow
+		AFTER_JMP
+
+LoopEntry:
+
+        cmp bx,word ptr [rsi + r8 - 1]
+		BEFORE_JMP
+        jnz LookupLoop1
+		AFTER_JMP
+LookupLoopIsZero:
+        cmp     r12w, word ptr [r10 + r8]
+		BEFORE_JMP
+        jnz LookupLoop1
+		AFTER_JMP
+
+
+//;;; Store the current value of chainlen.
+        mov [chainlenwmask], edx
+/*
+;;; Point edi to the string under scrutiny, and esi to the string we
+;;; are hoping to match it up with. In actuality, esi and edi are
+;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is
+;;; initialized to -(MAX_MATCH_8 - scanalign).
+*/
+        lea rsi,[r8+r10]
+        mov rdx, 0xfffffffffffffef8 //; -(MAX_MATCH_8)
+        lea rsi, [rsi + r13 + 0x0108] //;MAX_MATCH_8]
+        lea rdi, [r9 + r13 + 0x0108] //;MAX_MATCH_8]
+
+        prefetcht1 [rsi+rdx]
+        prefetcht1 [rdi+rdx]
+
+/*
+;;; Test the strings for equality, 8 bytes at a time. At the end,
+;;; adjust rdx so that it is offset to the exact byte that mismatched.
+;;;
+;;; We already know at this point that the first three bytes of the
+;;; strings match each other, and they can be safely passed over before
+;;; starting the compare loop. So what this code does is skip over 0-3
+;;; bytes, as much as necessary in order to dword-align the edi
+;;; pointer. (rsi will still be misaligned three times out of four.)
+;;;
+;;; It should be confessed that this loop usually does not represent
+;;; much of the total running time. Replacing it with a more
+;;; straightforward "rep cmpsb" would not drastically degrade
+;;; performance.
+*/
+
+LoopCmps:
+        mov rax, [rsi + rdx]
+        xor rax, [rdi + rdx]
+        jnz LeaveLoopCmps
+
+        mov rax, [rsi + rdx + 8]
+        xor rax, [rdi + rdx + 8]
+        jnz LeaveLoopCmps8
+
+
+        mov rax, [rsi + rdx + 8+8]
+        xor rax, [rdi + rdx + 8+8]
+        jnz LeaveLoopCmps16
+
+        add rdx,8+8+8
+
+		BEFORE_JMP
+        jnz  LoopCmps
+        jmp  LenMaximum
+		AFTER_JMP
+		
+LeaveLoopCmps16: add rdx,8
+LeaveLoopCmps8: add rdx,8
+LeaveLoopCmps:
+
+        test    eax, 0x0000FFFF
+        jnz LenLower
+
+        test eax,0xffffffff
+
+        jnz LenLower32
+
+        add rdx,4
+        shr rax,32
+        or ax,ax
+		BEFORE_JMP
+        jnz LenLower
+		AFTER_JMP
+
+LenLower32:
+        shr eax,16
+        add rdx,2
+		
+LenLower:		
+        sub al, 1
+        adc rdx, 0
+//;;; Calculate the length of the match. If it is longer than MAX_MATCH,
+//;;; then automatically accept it as the best possible match and leave.
+
+        lea rax, [rdi + rdx]
+        sub rax, r9
+        cmp eax, MAX_MATCH
+		BEFORE_JMP
+        jge LenMaximum
+		AFTER_JMP
+/*
+;;; If the length of the match is not longer than the best match we
+;;; have so far, then forget it and return to the lookup loop.
+;///////////////////////////////////
+*/
+        cmp eax, r11d
+        jg  LongerMatch
+
+        lea rsi,[r10+r11]
+
+        mov rdi, prev_ad
+        mov edx, [chainlenwmask]
+		BEFORE_JMP
+        jmp LookupLoop
+		AFTER_JMP
+/*
+;;;         s->match_start = cur_match;
+;;;         best_len = len;
+;;;         if (len >= nice_match) break;
+;;;         scan_end = *(ushf*)(scan+best_len-1);
+*/
+LongerMatch:
+        mov r11d, eax
+        mov match_start, r8d
+        cmp eax, [nicematch]
+		BEFORE_JMP
+        jge LeaveNow
+		AFTER_JMP
+
+        lea rsi,[r10+rax]
+
+        movzx   ebx, word ptr [r9 + rax - 1]
+        mov rdi, prev_ad
+        mov edx, [chainlenwmask]
+		BEFORE_JMP
+        jmp LookupLoop
+		AFTER_JMP
+
+//;;; Accept the current string, with the maximum possible length.
+
+LenMaximum:
+        mov r11d,MAX_MATCH
+        mov match_start, r8d
+
+//;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+//;;; return s->lookahead;
+
+LeaveNow:
+        mov eax, Lookahead
+        cmp r11d, eax
+        cmovng eax, r11d
+
+
+
+//;;; Restore the stack and return from whence we came.
+
+
+//        mov rsi,[save_rsi]
+//        mov rdi,[save_rdi]
+        mov rbx,[save_rbx]
+        mov rbp,[save_rbp]
+        mov r12,[save_r12]
+        mov r13,[save_r13]
+        mov r14,[save_r14]
+        mov r15,[save_r15]
+
+
+        ret 0
+//; please don't remove this string !
+//; Your can freely use gvmat64 in any free or commercial app
+//; but it is far better don't remove the string in the binary!
+ //   db     0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998, converted to amd 64 by Gilles Vollant 2005",0dh,0ah,0
+
+
+match_init:
+  ret 0
+
+

contrib/infback9/infback9.c

@@ -1,5 +1,5 @@
 /* infback9.c -- inflate deflate64 data using a call-back interface
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2008 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -242,7 +242,7 @@ void FAR *out_desc;
     code const FAR *distcode;   /* starting table for distance codes */
     unsigned lenbits;           /* index bits for lencode */
     unsigned distbits;          /* index bits for distcode */
-    code this;                  /* current decoding table entry */
+    code here;                  /* current decoding table entry */
     code last;                  /* parent table entry */
     unsigned len;               /* length to copy for repeats, bits to drop */
     int ret;                    /* return code */
@@ -384,19 +384,19 @@ void FAR *out_desc;
             state->have = 0;
             while (state->have < state->nlen + state->ndist) {
                 for (;;) {
-                    this = lencode[BITS(lenbits)];
+                    here = lencode[BITS(lenbits)];
-                    if ((unsigned)(this.bits) <= bits) break;
+                    if ((unsigned)(here.bits) <= bits) break;
                     PULLBYTE();
                 }
-                if (this.val < 16) {
+                if (here.val < 16) {
-                    NEEDBITS(this.bits);
+                    NEEDBITS(here.bits);
-                    DROPBITS(this.bits);
+                    DROPBITS(here.bits);
-                    state->lens[state->have++] = this.val;
+                    state->lens[state->have++] = here.val;
                 }
                 else {
-                    if (this.val == 16) {
+                    if (here.val == 16) {
-                        NEEDBITS(this.bits + 2);
+                        NEEDBITS(here.bits + 2);
-                        DROPBITS(this.bits);
+                        DROPBITS(here.bits);
                         if (state->have == 0) {
                             strm->msg = (char *)"invalid bit length repeat";
                             mode = BAD;
@@ -406,16 +406,16 @@ void FAR *out_desc;
                         copy = 3 + BITS(2);
                         DROPBITS(2);
                     }
-                    else if (this.val == 17) {
+                    else if (here.val == 17) {
-                        NEEDBITS(this.bits + 3);
+                        NEEDBITS(here.bits + 3);
-                        DROPBITS(this.bits);
+                        DROPBITS(here.bits);
                         len = 0;
                         copy = 3 + BITS(3);
                         DROPBITS(3);
                     }
                     else {
-                        NEEDBITS(this.bits + 7);
+                        NEEDBITS(here.bits + 7);
-                        DROPBITS(this.bits);
+                        DROPBITS(here.bits);
                         len = 0;
                         copy = 11 + BITS(7);
                         DROPBITS(7);
@@ -430,7 +430,19 @@ void FAR *out_desc;
                 }
             }
 
-            /* build code tables */
+            /* handle error breaks in while */
+            if (mode == BAD) break;
+
+            /* check for end-of-block code (better have one) */
+            if (state->lens[256] == 0) {
+                strm->msg = (char *)"invalid code -- missing end-of-block";
+                mode = BAD;
+                break;
+            }
+
+            /* build code tables -- note: do not change the lenbits or distbits
+               values here (9 and 6) without reading the comments in inftree9.h
+               concerning the ENOUGH constants, which depend on those values */
             state->next = state->codes;
             lencode = (code const FAR *)(state->next);
             lenbits = 9;
@@ -457,28 +469,28 @@ void FAR *out_desc;
         case LEN:
             /* get a literal, length, or end-of-block code */
             for (;;) {
-                this = lencode[BITS(lenbits)];
+                here = lencode[BITS(lenbits)];
-                if ((unsigned)(this.bits) <= bits) break;
+                if ((unsigned)(here.bits) <= bits) break;
                 PULLBYTE();
             }
-            if (this.op && (this.op & 0xf0) == 0) {
+            if (here.op && (here.op & 0xf0) == 0) {
-                last = this;
+                last = here;
                 for (;;) {
-                    this = lencode[last.val +
+                    here = lencode[last.val +
                             (BITS(last.bits + last.op) >> last.bits)];
-                    if ((unsigned)(last.bits + this.bits) <= bits) break;
+                    if ((unsigned)(last.bits + here.bits) <= bits) break;
                     PULLBYTE();
                 }
                 DROPBITS(last.bits);
             }
-            DROPBITS(this.bits);
+            DROPBITS(here.bits);
-            length = (unsigned)this.val;
+            length = (unsigned)here.val;
 
             /* process literal */
-            if (this.op == 0) {
+            if (here.op == 0) {
-                Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ?
+                Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
                         "inflate:         literal '%c'\n" :
-                        "inflate:         literal 0x%02x\n", this.val));
+                        "inflate:         literal 0x%02x\n", here.val));
                 ROOM();
                 *put++ = (unsigned char)(length);
                 left--;
@@ -487,21 +499,21 @@ void FAR *out_desc;
             }
 
             /* process end of block */
-            if (this.op & 32) {
+            if (here.op & 32) {
                 Tracevv((stderr, "inflate:         end of block\n"));
                 mode = TYPE;
                 break;
             }
 
             /* invalid code */
-            if (this.op & 64) {
+            if (here.op & 64) {
                 strm->msg = (char *)"invalid literal/length code";
                 mode = BAD;
                 break;
             }
 
             /* length code -- get extra bits, if any */
-            extra = (unsigned)(this.op) & 31;
+            extra = (unsigned)(here.op) & 31;
             if (extra != 0) {
                 NEEDBITS(extra);
                 length += BITS(extra);
@@ -511,30 +523,30 @@ void FAR *out_desc;
 
             /* get distance code */
             for (;;) {
-                this = distcode[BITS(distbits)];
+                here = distcode[BITS(distbits)];
-                if ((unsigned)(this.bits) <= bits) break;
+                if ((unsigned)(here.bits) <= bits) break;
                 PULLBYTE();
             }
-            if ((this.op & 0xf0) == 0) {
+            if ((here.op & 0xf0) == 0) {
-                last = this;
+                last = here;
                 for (;;) {
-                    this = distcode[last.val +
+                    here = distcode[last.val +
                             (BITS(last.bits + last.op) >> last.bits)];
-                    if ((unsigned)(last.bits + this.bits) <= bits) break;
+                    if ((unsigned)(last.bits + here.bits) <= bits) break;
                     PULLBYTE();
                 }
                 DROPBITS(last.bits);
             }
-            DROPBITS(this.bits);
+            DROPBITS(here.bits);
-            if (this.op & 64) {
+            if (here.op & 64) {
                 strm->msg = (char *)"invalid distance code";
                 mode = BAD;
                 break;
             }
-            offset = (unsigned)this.val;
+            offset = (unsigned)here.val;
 
             /* get distance extra bits, if any */
-            extra = (unsigned)(this.op) & 15;
+            extra = (unsigned)(here.op) & 15;
             if (extra != 0) {
                 NEEDBITS(extra);
                 offset += BITS(extra);

contrib/infback9/infback9.h

@@ -16,6 +16,10 @@
  * zlib.h must be included before this header file.
  */
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 ZEXTERN int ZEXPORT inflateBack9 OF((z_stream FAR *strm,
                                     in_func in, void FAR *in_desc,
                                     out_func out, void FAR *out_desc));
@@ -27,3 +31,7 @@ ZEXTERN int ZEXPORT inflateBack9Init_ OF((z_stream FAR *strm,
 #define inflateBack9Init(strm, window) \
         inflateBack9Init_((strm), (window), \
         ZLIB_VERSION, sizeof(z_stream))
+
+#ifdef __cplusplus
+}
+#endif

contrib/infback9/inftree9.c

@@ -1,5 +1,5 @@
 /* inftree9.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2010 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate9_copyright[] =
-   " inflate9 1.2.1 Copyright 1995-2003 Mark Adler ";
+   " inflate9 1.2.5 Copyright 1995-2010 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -64,7 +64,7 @@ unsigned short FAR *work;
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
         130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
-        133, 133, 133, 133, 144, 76, 66};
+        133, 133, 133, 133, 144, 73, 195};
     static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
         65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,
@@ -128,7 +128,7 @@ unsigned short FAR *work;
         left -= count[len];
         if (left < 0) return -1;        /* over-subscribed */
     }
-    if (left > 0 && (type == CODES || (codes - count[0] != 1)))
+    if (left > 0 && (type == CODES || max != 1))
         return -1;                      /* incomplete set */
 
     /* generate offsets into symbol table for each length for sorting */
@@ -160,11 +160,10 @@ unsigned short FAR *work;
        entered in the tables.
 
        used keeps track of how many table entries have been allocated from the
-       provided *table space.  It is checked when a LENS table is being made
+       provided *table space.  It is checked for LENS and DIST tables against
-       against the space in *table, ENOUGH, minus the maximum space needed by
+       the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in
-       the worst case distance code, MAXD.  This should never happen, but the
+       the initial root table size constants.  See the comments in inftree9.h
-       sufficiency of ENOUGH has not been proven exhaustively, hence the check.
+       for more information.
-       This assumes that when type == LENS, bits == 9.
 
        sym increments through all symbols, and the loop terminates when
        all codes of length max, i.e. all codes, have been processed.  This
@@ -203,7 +202,8 @@ unsigned short FAR *work;
     mask = used - 1;            /* mask for comparing low */
 
     /* check available table space */
-    if (type == LENS && used >= ENOUGH - MAXD)
+    if ((type == LENS && used >= ENOUGH_LENS) ||
+        (type == DISTS && used >= ENOUGH_DISTS))
         return 1;
 
     /* process all codes and make table entries */
@@ -270,7 +270,8 @@ unsigned short FAR *work;
 
             /* check for enough space */
             used += 1U << curr;
-            if (type == LENS && used >= ENOUGH - MAXD)
+            if ((type == LENS && used >= ENOUGH_LENS) ||
+                (type == DISTS && used >= ENOUGH_DISTS))
                 return 1;
 
             /* point entry in root table to sub-table */

contrib/infback9/inftree9.h

@@ -1,5 +1,5 @@
 /* inftree9.h -- header to use inftree9.c
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2008 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -35,15 +35,21 @@ typedef struct {
     01000000 - invalid code
  */
 
-/* Maximum size of dynamic tree.  The maximum found in a long but non-
+/* Maximum size of the dynamic table.  The maximum number of code structures is
-   exhaustive search was 1004 code structures (850 for length/literals
+   1446, which is the sum of 852 for literal/length codes and 594 for distance
-   and 154 for distances, the latter actually the result of an
+   codes.  These values were found by exhaustive searches using the program
-   exhaustive search).  The true maximum is not known, but the value
+   examples/enough.c found in the zlib distribtution.  The arguments to that
-   below is more than safe. */
+   program are the number of symbols, the initial root table size, and the
-#define ENOUGH 1440
+   maximum bit length of a code.  "enough 286 9 15" for literal/length codes
-#define MAXD 154
+   returns returns 852, and "enough 32 6 15" for distance codes returns 594.
+   The initial root table size (9 or 6) is found in the fifth argument of the
+   inflate_table() calls in infback9.c.  If the root table size is changed,
+   then these maximum sizes would be need to be recalculated and updated. */
+#define ENOUGH_LENS 852
+#define ENOUGH_DISTS 594
+#define ENOUGH (ENOUGH_LENS+ENOUGH_DISTS)
 
-/* Type of code to build for inftable() */
+/* Type of code to build for inflate_table9() */
 typedef enum {
     CODES,
     LENS,

contrib/inflate86/inffast.S

@@ -188,17 +188,8 @@
 /*
  * typedef enum inflate_mode consts, in inflate.h
  */
-#ifndef NO_GUNZIP
-#define GUNZIP
-#endif
-
-#ifdef GUNZIP
 #define INFLATE_MODE_TYPE 11  /* state->mode flags enum-ed in inflate.h */
 #define INFLATE_MODE_BAD  26
-#else
-#define INFLATE_MODE_TYPE 3
-#define INFLATE_MODE_BAD  17
-#endif
 
 
 #if ! defined( USE_MMX ) && ! defined( NO_MMX )

contrib/masm686/match.asm

@@ -1,408 +0,0 @@
-
-; match.asm -- Pentium-Pro optimized version of longest_match()
-;
-; Updated for zlib 1.1.3 and converted to MASM 6.1x
-; Copyright (C) 2000 Dan Higdon <hdan@kinesoft.com>
-;                    and Chuck Walbourn <chuckw@kinesoft.com>
-; Corrections by Cosmin Truta <cosmint@cs.ubbcluj.ro>
-;
-; This is free software; you can redistribute it and/or modify it
-; under the terms of the GNU General Public License.
-
-; Based on match.S
-; Written for zlib 1.1.2
-; Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
-
-	.686P
-	.MODEL	FLAT
-
-;===========================================================================
-; EQUATES
-;===========================================================================
-
-MAX_MATCH	EQU 258
-MIN_MATCH	EQU 3
-MIN_LOOKAHEAD	EQU (MAX_MATCH + MIN_MATCH + 1)
-MAX_MATCH_8	EQU ((MAX_MATCH + 7) AND (NOT 7))
-
-;===========================================================================
-; STRUCTURES
-;===========================================================================
-
-; This STRUCT assumes a 4-byte alignment
-
-DEFLATE_STATE	STRUCT
-ds_strm			dd ?
-ds_status		dd ?
-ds_pending_buf		dd ?
-ds_pending_buf_size	dd ?
-ds_pending_out		dd ?
-ds_pending		dd ?
-ds_wrap			dd ?
-ds_data_type		db ?
-ds_method		db ?
-			db ?	; padding
-			db ?	; padding
-ds_last_flush		dd ?
-ds_w_size		dd ?	; used
-ds_w_bits		dd ?
-ds_w_mask		dd ?	; used
-ds_window		dd ?	; used
-ds_window_size		dd ?
-ds_prev			dd ?	; used
-ds_head			dd ?
-ds_ins_h		dd ?
-ds_hash_size		dd ?
-ds_hash_bits		dd ?
-ds_hash_mask		dd ?
-ds_hash_shift		dd ?
-ds_block_start		dd ?
-ds_match_length		dd ?	; used
-ds_prev_match		dd ?	; used
-ds_match_available	dd ?
-ds_strstart		dd ?	; used
-ds_match_start		dd ?	; used
-ds_lookahead		dd ?	; used
-ds_prev_length		dd ?	; used
-ds_max_chain_length	dd ?	; used
-ds_max_laxy_match	dd ?
-ds_level		dd ?
-ds_strategy		dd ?
-ds_good_match		dd ?	; used
-ds_nice_match		dd ?	; used
-
-; Don't need anymore of the struct for match
-DEFLATE_STATE	ENDS
-
-;===========================================================================
-; CODE
-;===========================================================================
-_TEXT	SEGMENT
-
-;---------------------------------------------------------------------------
-; match_init
-;---------------------------------------------------------------------------
-	ALIGN	4
-PUBLIC	_match_init
-_match_init	PROC
-	; no initialization needed
-	ret
-_match_init	ENDP
-
-;---------------------------------------------------------------------------
-; uInt longest_match(deflate_state *deflatestate, IPos curmatch)
-;---------------------------------------------------------------------------
-	ALIGN	4
-
-PUBLIC	_longest_match
-_longest_match	PROC
-
-; Since this code uses EBP for a scratch register, the stack frame must
-; be manually constructed and referenced relative to the ESP register.
-
-; Stack image
-; Variables
-chainlenwmask	=  0	; high word: current chain len
-			; low word: s->wmask
-window		=  4	; local copy of s->window
-windowbestlen	=  8	; s->window + bestlen
-scanend		= 12	; last two bytes of string
-scanstart	= 16	; first two bytes of string
-scanalign	= 20	; dword-misalignment of string
-nicematch	= 24	; a good enough match size
-bestlen		= 28	; size of best match so far
-scan		= 32	; ptr to string wanting match
-varsize		= 36	; number of bytes (also offset to last saved register)
-
-; Saved Registers (actually pushed into place)
-ebx_save	= 36
-edi_save	= 40
-esi_save	= 44
-ebp_save	= 48
-
-; Parameters
-retaddr		= 52
-deflatestate	= 56
-curmatch	= 60
-
-; Save registers that the compiler may be using
-	push	ebp
-	push	edi
-	push	esi
-	push	ebx
-
-; Allocate local variable space
-	sub	esp,varsize
-
-; Retrieve the function arguments. ecx will hold cur_match
-; throughout the entire function. edx will hold the pointer to the
-; deflate_state structure during the function's setup (before
-; entering the main loop).
-
-	mov	edx, [esp+deflatestate]
-ASSUME	edx:PTR DEFLATE_STATE
-
-	mov	ecx, [esp+curmatch]
-
-; uInt wmask = s->w_mask;
-; unsigned chain_length = s->max_chain_length;
-; if (s->prev_length >= s->good_match) {
-;     chain_length >>= 2;
-; }
-
-	mov	eax, [edx].ds_prev_length
-	mov	ebx, [edx].ds_good_match
-	cmp	eax, ebx
-	mov	eax, [edx].ds_w_mask
-	mov	ebx, [edx].ds_max_chain_length
-	jl	SHORT LastMatchGood
-	shr	ebx, 2
-LastMatchGood:
-
-; chainlen is decremented once beforehand so that the function can
-; use the sign flag instead of the zero flag for the exit test.
-; It is then shifted into the high word, to make room for the wmask
-; value, which it will always accompany.
-
-	dec	ebx
-	shl	ebx, 16
-	or	ebx, eax
-	mov	[esp+chainlenwmask], ebx
-
-; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
-
-	mov	eax, [edx].ds_nice_match
-	mov	ebx, [edx].ds_lookahead
-	cmp	ebx, eax
-	jl	SHORT LookaheadLess
-	mov	ebx, eax
-LookaheadLess:
-	mov	[esp+nicematch], ebx
-
-;/* register Bytef *scan = s->window + s->strstart;                     */
-
-	mov	esi, [edx].ds_window
-	mov	[esp+window], esi
-	mov	ebp, [edx].ds_strstart
-	lea	edi, [esi+ebp]
-	mov	[esp+scan],edi
-
-;/* Determine how many bytes the scan ptr is off from being             */
-;/* dword-aligned.                                                      */
-
-	mov	eax, edi
-	neg	eax
-	and	eax, 3
-	mov	[esp+scanalign], eax
-
-;/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ?                      */
-;/*     s->strstart - (IPos)MAX_DIST(s) : NIL;                          */
-
-	mov	eax, [edx].ds_w_size
-	sub	eax, MIN_LOOKAHEAD
-	sub	ebp, eax
-	jg	SHORT LimitPositive
-	xor	ebp, ebp
-LimitPositive:
-
-;/* int best_len = s->prev_length;                                      */
-
-	mov	eax, [edx].ds_prev_length
-	mov	[esp+bestlen], eax
-
-;/* Store the sum of s->window + best_len in %esi locally, and in %esi. */
-
-	add	esi, eax
-	mov	[esp+windowbestlen], esi
-
-;/* register ush scan_start = *(ushf*)scan;                             */
-;/* register ush scan_end   = *(ushf*)(scan+best_len-1);                */
-;/* Posf *prev = s->prev;                                               */
-
-	movzx	ebx, WORD PTR[edi]
-	mov	[esp+scanstart], ebx
-	movzx	ebx, WORD PTR[eax+edi-1]
-	mov	[esp+scanend], ebx
-	mov	edi, [edx].ds_prev
-
-;/* Jump into the main loop.                                            */
-
-	mov	edx, [esp+chainlenwmask]
-	jmp	SHORT LoopEntry
-
-;/* do {
-; *     match = s->window + cur_match;
-; *     if (*(ushf*)(match+best_len-1) != scan_end ||
-; *         *(ushf*)match != scan_start) continue;
-; *     [...]
-; * } while ((cur_match = prev[cur_match & wmask]) > limit
-; *          && --chain_length != 0);
-; *
-; * Here is the inner loop of the function. The function will spend the
-; * majority of its time in this loop, and majority of that time will
-; * be spent in the first ten instructions.
-; *
-; * Within this loop:
-; * %ebx = scanend
-; * %ecx = curmatch
-; * %edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
-; * %esi = windowbestlen - i.e., (window + bestlen)
-; * %edi = prev
-; * %ebp = limit
-; */
-
-	ALIGN	4
-LookupLoop:
-	and	ecx, edx
-	movzx	ecx, WORD PTR[edi+ecx*2]
-	cmp	ecx, ebp
-	jbe	LeaveNow
-	sub	edx, 000010000H
-	js	LeaveNow
-
-LoopEntry:
-	movzx	eax, WORD PTR[esi+ecx-1]
-	cmp	eax, ebx
-	jnz	SHORT LookupLoop
-
-	mov	eax, [esp+window]
-	movzx	eax, WORD PTR[eax+ecx]
-	cmp	eax, [esp+scanstart]
-	jnz	SHORT LookupLoop
-
-;/* Store the current value of chainlen.                                */
-
-	mov	[esp+chainlenwmask], edx
-
-;/* Point %edi to the string under scrutiny, and %esi to the string we  */
-;/* are hoping to match it up with. In actuality, %esi and %edi are     */
-;/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is     */
-;/* initialized to -(MAX_MATCH_8 - scanalign).                          */
-
-	mov	esi, [esp+window]
-	mov	edi, [esp+scan]
-	add	esi, ecx
-	mov	eax, [esp+scanalign]
-	mov	edx, -MAX_MATCH_8
-	lea	edi, [edi+eax+MAX_MATCH_8]
-	lea	esi, [esi+eax+MAX_MATCH_8]
-
-;/* Test the strings for equality, 8 bytes at a time. At the end,
-; * adjust %edx so that it is offset to the exact byte that mismatched.
-; *
-; * We already know at this point that the first three bytes of the
-; * strings match each other, and they can be safely passed over before
-; * starting the compare loop. So what this code does is skip over 0-3
-; * bytes, as much as necessary in order to dword-align the %edi
-; * pointer. (%esi will still be misaligned three times out of four.)
-; *
-; * It should be confessed that this loop usually does not represent
-; * much of the total running time. Replacing it with a more
-; * straightforward "rep cmpsb" would not drastically degrade
-; * performance.
-; */
-
-LoopCmps:
-	mov	eax, DWORD PTR[esi+edx]
-	xor	eax, DWORD PTR[edi+edx]
-	jnz	SHORT LeaveLoopCmps
-
-	mov	eax, DWORD PTR[esi+edx+4]
-	xor	eax, DWORD PTR[edi+edx+4]
-	jnz	SHORT LeaveLoopCmps4
-
-	add	edx, 8
-	jnz	SHORT LoopCmps
-	jmp	LenMaximum
-	ALIGN	4
-
-LeaveLoopCmps4:
-	add	edx, 4
-
-LeaveLoopCmps:
-	test	eax, 00000FFFFH
-	jnz	SHORT LenLower
-
-	add	edx, 2
-	shr	eax, 16
-
-LenLower:
-	sub	al, 1
-	adc	edx, 0
-
-;/* Calculate the length of the match. If it is longer than MAX_MATCH,  */
-;/* then automatically accept it as the best possible match and leave.  */
-
-	lea	eax, [edi+edx]
-	mov	edi, [esp+scan]
-	sub	eax, edi
-	cmp	eax, MAX_MATCH
-	jge	SHORT LenMaximum
-
-;/* If the length of the match is not longer than the best match we     */
-;/* have so far, then forget it and return to the lookup loop.          */
-
-	mov	edx, [esp+deflatestate]
-	mov	ebx, [esp+bestlen]
-	cmp	eax, ebx
-	jg	SHORT LongerMatch
-	mov	esi, [esp+windowbestlen]
-	mov	edi, [edx].ds_prev
-	mov	ebx, [esp+scanend]
-	mov	edx, [esp+chainlenwmask]
-	jmp	LookupLoop
-	ALIGN	4
-
-;/*         s->match_start = cur_match;                                 */
-;/*         best_len = len;                                             */
-;/*         if (len >= nice_match) break;                               */
-;/*         scan_end = *(ushf*)(scan+best_len-1);                       */
-
-LongerMatch:
-	mov	ebx, [esp+nicematch]
-	mov	[esp+bestlen], eax
-	mov	[edx].ds_match_start, ecx
-	cmp	eax, ebx
-	jge	SHORT LeaveNow
-	mov	esi, [esp+window]
-	add	esi, eax
-	mov	[esp+windowbestlen], esi
-	movzx	ebx, WORD PTR[edi+eax-1]
-	mov	edi, [edx].ds_prev
-	mov	[esp+scanend], ebx
-	mov	edx, [esp+chainlenwmask]
-	jmp	LookupLoop
-	ALIGN	4
-
-;/* Accept the current string, with the maximum possible length.        */
-
-LenMaximum:
-	mov	edx, [esp+deflatestate]
-	mov	DWORD PTR[esp+bestlen], MAX_MATCH
-	mov	[edx].ds_match_start, ecx
-
-;/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len;          */
-;/* return s->lookahead;                                                */
-
-LeaveNow:
-	mov	edx, [esp+deflatestate]
-	mov	ebx, [esp+bestlen]
-	mov	eax, [edx].ds_lookahead
-	cmp	ebx, eax
-	jg	SHORT LookaheadRet
-	mov	eax, ebx
-LookaheadRet:
-
-; Restore the stack and return from whence we came.
-
-	add	esp, varsize
-	pop	ebx
-	pop	esi
-	pop	edi
-	pop	ebp
-	ret
-
-_longest_match	ENDP
-
-_TEXT	ENDS
-END

contrib/masmx64/bld_ml64.bat

@@ -0,0 +1,2 @@
+ml64.exe /Flinffasx64 /c /Zi inffasx64.asm
+ml64.exe /Flgvmat64   /c /Zi gvmat64.asm

contrib/masmx64/gvmat64.asm

@@ -0,0 +1,553 @@
+;uInt longest_match_x64(
+;    deflate_state *s,
+;    IPos cur_match);                             /* current match */
+
+; gvmat64.asm -- Asm portion of the optimized longest_match for 32 bits x86_64
+;  (AMD64 on Athlon 64, Opteron, Phenom
+;     and Intel EM64T on Pentium 4 with EM64T, Pentium D, Core 2 Duo, Core I5/I7)
+; Copyright (C) 1995-2010 Jean-loup Gailly, Brian Raiter and Gilles Vollant.
+;
+; File written by Gilles Vollant, by converting to assembly the longest_match
+;  from Jean-loup Gailly in deflate.c of zLib and infoZip zip.
+;
+;  and by taking inspiration on asm686 with masm, optimised assembly code
+;        from Brian Raiter, written 1998
+;
+;  This software is provided 'as-is', without any express or implied
+;  warranty.  In no event will the authors be held liable for any damages
+;  arising from the use of this software.
+;
+;  Permission is granted to anyone to use this software for any purpose,
+;  including commercial applications, and to alter it and redistribute it
+;  freely, subject to the following restrictions:
+;
+;  1. The origin of this software must not be misrepresented; you must not
+;     claim that you wrote the original software. If you use this software
+;     in a product, an acknowledgment in the product documentation would be
+;     appreciated but is not required.
+;  2. Altered source versions must be plainly marked as such, and must not be
+;     misrepresented as being the original software
+;  3. This notice may not be removed or altered from any source distribution.
+;
+;
+;
+;         http://www.zlib.net
+;         http://www.winimage.com/zLibDll
+;         http://www.muppetlabs.com/~breadbox/software/assembly.html
+;
+; to compile this file for infozip Zip, I use option:
+;   ml64.exe /Flgvmat64 /c /Zi /DINFOZIP gvmat64.asm
+;
+; to compile this file for zLib, I use option:
+;   ml64.exe /Flgvmat64 /c /Zi gvmat64.asm
+; Be carrefull to adapt zlib1222add below to your version of zLib
+;   (if you use a version of zLib before 1.0.4 or after 1.2.2.2, change
+;    value of zlib1222add later)
+;
+; This file compile with Microsoft Macro Assembler (x64) for AMD64
+;
+;   ml64.exe is given with Visual Studio 2005/2008/2010 and Windows WDK
+;
+;   (you can get Windows WDK with ml64 for AMD64 from
+;      http://www.microsoft.com/whdc/Devtools/wdk/default.mspx for low price)
+;
+
+
+;uInt longest_match(s, cur_match)
+;    deflate_state *s;
+;    IPos cur_match;                             /* current match */
+.code
+longest_match PROC
+
+
+;LocalVarsSize   equ 88
+ LocalVarsSize   equ 72
+
+; register used : rax,rbx,rcx,rdx,rsi,rdi,r8,r9,r10,r11,r12
+; free register :  r14,r15
+; register can be saved : rsp
+
+ chainlenwmask   equ  rsp + 8 - LocalVarsSize    ; high word: current chain len
+                                                 ; low word: s->wmask
+;window          equ  rsp + xx - LocalVarsSize   ; local copy of s->window ; stored in r10
+;windowbestlen   equ  rsp + xx - LocalVarsSize   ; s->window + bestlen , use r10+r11
+;scanstart       equ  rsp + xx - LocalVarsSize   ; first two bytes of string ; stored in r12w
+;scanend         equ  rsp + xx - LocalVarsSize   ; last two bytes of string use ebx
+;scanalign       equ  rsp + xx - LocalVarsSize   ; dword-misalignment of string r13
+;bestlen         equ  rsp + xx - LocalVarsSize   ; size of best match so far -> r11d
+;scan            equ  rsp + xx - LocalVarsSize   ; ptr to string wanting match -> r9
+IFDEF INFOZIP
+ELSE
+ nicematch       equ  (rsp + 16 - LocalVarsSize) ; a good enough match size
+ENDIF
+
+save_rdi        equ  rsp + 24 - LocalVarsSize
+save_rsi        equ  rsp + 32 - LocalVarsSize
+save_rbx        equ  rsp + 40 - LocalVarsSize
+save_rbp        equ  rsp + 48 - LocalVarsSize
+save_r12        equ  rsp + 56 - LocalVarsSize
+save_r13        equ  rsp + 64 - LocalVarsSize
+;save_r14        equ  rsp + 72 - LocalVarsSize
+;save_r15        equ  rsp + 80 - LocalVarsSize
+
+
+; summary of register usage
+; scanend     ebx
+; scanendw    bx
+; chainlenwmask   edx
+; curmatch    rsi
+; curmatchd   esi
+; windowbestlen   r8
+; scanalign   r9
+; scanalignd  r9d
+; window      r10
+; bestlen     r11
+; bestlend    r11d
+; scanstart   r12d
+; scanstartw  r12w
+; scan        r13
+; nicematch   r14d
+; limit       r15
+; limitd      r15d
+; prev        rcx
+
+;  all the +4 offsets are due to the addition of pending_buf_size (in zlib
+;  in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, remove the +4).
+;  Note : these value are good with a 8 bytes boundary pack structure
+
+
+    MAX_MATCH           equ     258
+    MIN_MATCH           equ     3
+    MIN_LOOKAHEAD       equ     (MAX_MATCH+MIN_MATCH+1)
+
+
+;;; Offsets for fields in the deflate_state structure. These numbers
+;;; are calculated from the definition of deflate_state, with the
+;;; assumption that the compiler will dword-align the fields. (Thus,
+;;; changing the definition of deflate_state could easily cause this
+;;; program to crash horribly, without so much as a warning at
+;;; compile time. Sigh.)
+
+;  all the +zlib1222add offsets are due to the addition of fields
+;  in zlib in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+;  (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+;  if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
+
+
+IFDEF INFOZIP
+
+_DATA   SEGMENT
+COMM    window_size:DWORD
+; WMask ; 7fff
+COMM    window:BYTE:010040H
+COMM    prev:WORD:08000H
+; MatchLen : unused
+; PrevMatch : unused
+COMM    strstart:DWORD
+COMM    match_start:DWORD
+; Lookahead : ignore
+COMM    prev_length:DWORD ; PrevLen
+COMM    max_chain_length:DWORD
+COMM    good_match:DWORD
+COMM    nice_match:DWORD
+prev_ad equ OFFSET prev
+window_ad equ OFFSET window
+nicematch equ nice_match
+_DATA ENDS
+WMask equ 07fffh
+
+ELSE
+
+  IFNDEF zlib1222add
+    zlib1222add equ 8
+  ENDIF
+dsWSize         equ 56+zlib1222add+(zlib1222add/2)
+dsWMask         equ 64+zlib1222add+(zlib1222add/2)
+dsWindow        equ 72+zlib1222add
+dsPrev          equ 88+zlib1222add
+dsMatchLen      equ 128+zlib1222add
+dsPrevMatch     equ 132+zlib1222add
+dsStrStart      equ 140+zlib1222add
+dsMatchStart    equ 144+zlib1222add
+dsLookahead     equ 148+zlib1222add
+dsPrevLen       equ 152+zlib1222add
+dsMaxChainLen   equ 156+zlib1222add
+dsGoodMatch     equ 172+zlib1222add
+dsNiceMatch     equ 176+zlib1222add
+
+window_size     equ [ rcx + dsWSize]
+WMask           equ [ rcx + dsWMask]
+window_ad       equ [ rcx + dsWindow]
+prev_ad         equ [ rcx + dsPrev]
+strstart        equ [ rcx + dsStrStart]
+match_start     equ [ rcx + dsMatchStart]
+Lookahead       equ [ rcx + dsLookahead] ; 0ffffffffh on infozip
+prev_length     equ [ rcx + dsPrevLen]
+max_chain_length equ [ rcx + dsMaxChainLen]
+good_match      equ [ rcx + dsGoodMatch]
+nice_match      equ [ rcx + dsNiceMatch]
+ENDIF
+
+; parameter 1 in r8(deflate state s), param 2 in rdx (cur match)
+
+; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and
+; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp
+;
+; All registers must be preserved across the call, except for
+;   rax, rcx, rdx, r8, r9, r10, and r11, which are scratch.
+
+
+
+;;; Save registers that the compiler may be using, and adjust esp to
+;;; make room for our stack frame.
+
+
+;;; Retrieve the function arguments. r8d will hold cur_match
+;;; throughout the entire function. edx will hold the pointer to the
+;;; deflate_state structure during the function's setup (before
+;;; entering the main loop.
+
+; parameter 1 in rcx (deflate_state* s), param 2 in edx -> r8 (cur match)
+
+; this clear high 32 bits of r8, which can be garbage in both r8 and rdx
+
+        mov [save_rdi],rdi
+        mov [save_rsi],rsi
+        mov [save_rbx],rbx
+        mov [save_rbp],rbp
+IFDEF INFOZIP
+        mov r8d,ecx
+ELSE
+        mov r8d,edx
+ENDIF
+        mov [save_r12],r12
+        mov [save_r13],r13
+;        mov [save_r14],r14
+;        mov [save_r15],r15
+
+
+;;; uInt wmask = s->w_mask;
+;;; unsigned chain_length = s->max_chain_length;
+;;; if (s->prev_length >= s->good_match) {
+;;;     chain_length >>= 2;
+;;; }
+
+        mov edi, prev_length
+        mov esi, good_match
+        mov eax, WMask
+        mov ebx, max_chain_length
+        cmp edi, esi
+        jl  LastMatchGood
+        shr ebx, 2
+LastMatchGood:
+
+;;; chainlen is decremented once beforehand so that the function can
+;;; use the sign flag instead of the zero flag for the exit test.
+;;; It is then shifted into the high word, to make room for the wmask
+;;; value, which it will always accompany.
+
+        dec ebx
+        shl ebx, 16
+        or  ebx, eax
+
+;;; on zlib only
+;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+IFDEF INFOZIP
+        mov [chainlenwmask], ebx
+; on infozip nice_match = [nice_match]
+ELSE
+        mov eax, nice_match
+        mov [chainlenwmask], ebx
+        mov r10d, Lookahead
+        cmp r10d, eax
+        cmovnl r10d, eax
+        mov [nicematch],r10d
+ENDIF
+
+;;; register Bytef *scan = s->window + s->strstart;
+        mov r10, window_ad
+        mov ebp, strstart
+        lea r13, [r10 + rbp]
+
+;;; Determine how many bytes the scan ptr is off from being
+;;; dword-aligned.
+
+         mov r9,r13
+         neg r13
+         and r13,3
+
+;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+;;;     s->strstart - (IPos)MAX_DIST(s) : NIL;
+IFDEF INFOZIP
+        mov eax,07efah ; MAX_DIST = (WSIZE-MIN_LOOKAHEAD) (0x8000-(3+8+1))
+ELSE
+        mov eax, window_size
+        sub eax, MIN_LOOKAHEAD
+ENDIF
+        xor edi,edi
+        sub ebp, eax
+
+        mov r11d, prev_length
+
+        cmovng ebp,edi
+
+;;; int best_len = s->prev_length;
+
+
+;;; Store the sum of s->window + best_len in esi locally, and in esi.
+
+       lea  rsi,[r10+r11]
+
+;;; register ush scan_start = *(ushf*)scan;
+;;; register ush scan_end   = *(ushf*)(scan+best_len-1);
+;;; Posf *prev = s->prev;
+
+        movzx r12d,word ptr [r9]
+        movzx ebx, word ptr [r9 + r11 - 1]
+
+        mov rdi, prev_ad
+
+;;; Jump into the main loop.
+
+        mov edx, [chainlenwmask]
+
+        cmp bx,word ptr [rsi + r8 - 1]
+        jz  LookupLoopIsZero
+
+LookupLoop1:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+
+LoopEntry1:
+        cmp bx,word ptr [rsi + r8 - 1]
+        jz  LookupLoopIsZero
+
+LookupLoop2:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+
+LoopEntry2:
+        cmp bx,word ptr [rsi + r8 - 1]
+        jz  LookupLoopIsZero
+
+LookupLoop4:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+
+LoopEntry4:
+
+        cmp bx,word ptr [rsi + r8 - 1]
+        jnz LookupLoop1
+        jmp LookupLoopIsZero
+
+
+;;; do {
+;;;     match = s->window + cur_match;
+;;;     if (*(ushf*)(match+best_len-1) != scan_end ||
+;;;         *(ushf*)match != scan_start) continue;
+;;;     [...]
+;;; } while ((cur_match = prev[cur_match & wmask]) > limit
+;;;          && --chain_length != 0);
+;;;
+;;; Here is the inner loop of the function. The function will spend the
+;;; majority of its time in this loop, and majority of that time will
+;;; be spent in the first ten instructions.
+;;;
+;;; Within this loop:
+;;; ebx = scanend
+;;; r8d = curmatch
+;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
+;;; esi = windowbestlen - i.e., (window + bestlen)
+;;; edi = prev
+;;; ebp = limit
+
+LookupLoop:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+
+LoopEntry:
+
+        cmp bx,word ptr [rsi + r8 - 1]
+        jnz LookupLoop1
+LookupLoopIsZero:
+        cmp     r12w, word ptr [r10 + r8]
+        jnz LookupLoop1
+
+
+;;; Store the current value of chainlen.
+        mov [chainlenwmask], edx
+
+;;; Point edi to the string under scrutiny, and esi to the string we
+;;; are hoping to match it up with. In actuality, esi and edi are
+;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is
+;;; initialized to -(MAX_MATCH_8 - scanalign).
+
+        lea rsi,[r8+r10]
+        mov rdx, 0fffffffffffffef8h; -(MAX_MATCH_8)
+        lea rsi, [rsi + r13 + 0108h] ;MAX_MATCH_8]
+        lea rdi, [r9 + r13 + 0108h] ;MAX_MATCH_8]
+
+        prefetcht1 [rsi+rdx]
+        prefetcht1 [rdi+rdx]
+
+
+;;; Test the strings for equality, 8 bytes at a time. At the end,
+;;; adjust rdx so that it is offset to the exact byte that mismatched.
+;;;
+;;; We already know at this point that the first three bytes of the
+;;; strings match each other, and they can be safely passed over before
+;;; starting the compare loop. So what this code does is skip over 0-3
+;;; bytes, as much as necessary in order to dword-align the edi
+;;; pointer. (rsi will still be misaligned three times out of four.)
+;;;
+;;; It should be confessed that this loop usually does not represent
+;;; much of the total running time. Replacing it with a more
+;;; straightforward "rep cmpsb" would not drastically degrade
+;;; performance.
+
+
+LoopCmps:
+        mov rax, [rsi + rdx]
+        xor rax, [rdi + rdx]
+        jnz LeaveLoopCmps
+
+        mov rax, [rsi + rdx + 8]
+        xor rax, [rdi + rdx + 8]
+        jnz LeaveLoopCmps8
+
+
+        mov rax, [rsi + rdx + 8+8]
+        xor rax, [rdi + rdx + 8+8]
+        jnz LeaveLoopCmps16
+
+        add rdx,8+8+8
+
+        jnz short LoopCmps
+        jmp short LenMaximum
+LeaveLoopCmps16: add rdx,8
+LeaveLoopCmps8: add rdx,8
+LeaveLoopCmps:
+
+        test    eax, 0000FFFFh
+        jnz LenLower
+
+        test eax,0ffffffffh
+
+        jnz LenLower32
+
+        add rdx,4
+        shr rax,32
+        or ax,ax
+        jnz LenLower
+
+LenLower32:
+        shr eax,16
+        add rdx,2
+LenLower:   sub al, 1
+        adc rdx, 0
+;;; Calculate the length of the match. If it is longer than MAX_MATCH,
+;;; then automatically accept it as the best possible match and leave.
+
+        lea rax, [rdi + rdx]
+        sub rax, r9
+        cmp eax, MAX_MATCH
+        jge LenMaximum
+
+;;; If the length of the match is not longer than the best match we
+;;; have so far, then forget it and return to the lookup loop.
+;///////////////////////////////////
+
+        cmp eax, r11d
+        jg  LongerMatch
+
+        lea rsi,[r10+r11]
+
+        mov rdi, prev_ad
+        mov edx, [chainlenwmask]
+        jmp LookupLoop
+
+;;;         s->match_start = cur_match;
+;;;         best_len = len;
+;;;         if (len >= nice_match) break;
+;;;         scan_end = *(ushf*)(scan+best_len-1);
+
+LongerMatch:
+        mov r11d, eax
+        mov match_start, r8d
+        cmp eax, [nicematch]
+        jge LeaveNow
+
+        lea rsi,[r10+rax]
+
+        movzx   ebx, word ptr [r9 + rax - 1]
+        mov rdi, prev_ad
+        mov edx, [chainlenwmask]
+        jmp LookupLoop
+
+;;; Accept the current string, with the maximum possible length.
+
+LenMaximum:
+        mov r11d,MAX_MATCH
+        mov match_start, r8d
+
+;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+;;; return s->lookahead;
+
+LeaveNow:
+IFDEF INFOZIP
+        mov eax,r11d
+ELSE
+        mov eax, Lookahead
+        cmp r11d, eax
+        cmovng eax, r11d
+ENDIF
+
+;;; Restore the stack and return from whence we came.
+
+
+        mov rsi,[save_rsi]
+        mov rdi,[save_rdi]
+        mov rbx,[save_rbx]
+        mov rbp,[save_rbp]
+        mov r12,[save_r12]
+        mov r13,[save_r13]
+;        mov r14,[save_r14]
+;        mov r15,[save_r15]
+
+
+        ret 0
+; please don't remove this string !
+; Your can freely use gvmat64 in any free or commercial app
+; but it is far better don't remove the string in the binary!
+    db     0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998, converted to amd 64 by Gilles Vollant 2005",0dh,0ah,0
+longest_match   ENDP
+
+match_init PROC
+  ret 0
+match_init ENDP
+
+
+END

contrib/masmx64/inffas8664.c

@@ -0,0 +1,186 @@
+/* inffas8664.c is a hand tuned assembler version of inffast.c - fast decoding
+ * version for AMD64 on Windows using Microsoft C compiler
+ *
+ * Copyright (C) 1995-2003 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Copyright (C) 2003 Chris Anderson <christop@charm.net>
+ * Please use the copyright conditions above.
+ *
+ * 2005 - Adaptation to Microsoft C Compiler for AMD64 by Gilles Vollant
+ *
+ * inffas8664.c call function inffas8664fnc in inffasx64.asm
+ *  inffasx64.asm is automatically convert from AMD64 portion of inffas86.c
+ *
+ * Dec-29-2003 -- I added AMD64 inflate asm support.  This version is also
+ * slightly quicker on x86 systems because, instead of using rep movsb to copy
+ * data, it uses rep movsw, which moves data in 2-byte chunks instead of single
+ * bytes.  I've tested the AMD64 code on a Fedora Core 1 + the x86_64 updates
+ * from http://fedora.linux.duke.edu/fc1_x86_64
+ * which is running on an Athlon 64 3000+ / Gigabyte GA-K8VT800M system with
+ * 1GB ram.  The 64-bit version is about 4% faster than the 32-bit version,
+ * when decompressing mozilla-source-1.3.tar.gz.
+ *
+ * Mar-13-2003 -- Most of this is derived from inffast.S which is derived from
+ * the gcc -S output of zlib-1.2.0/inffast.c.  Zlib-1.2.0 is in beta release at
+ * the moment.  I have successfully compiled and tested this code with gcc2.96,
+ * gcc3.2, icc5.0, msvc6.0.  It is very close to the speed of inffast.S
+ * compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX
+ * enabled.  I will attempt to merge the MMX code into this version.  Newer
+ * versions of this and inffast.S can be found at
+ * http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/
+ *
+ */
+
+#include <stdio.h>
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+/* Mark Adler's comments from inffast.c: */
+
+/*
+   Decode literal, length, and distance codes and write out the resulting
+   literal and match bytes until either not enough input or output is
+   available, an end-of-block is encountered, or a data error is encountered.
+   When large enough input and output buffers are supplied to inflate(), for
+   example, a 16K input buffer and a 64K output buffer, more than 95% of the
+   inflate execution time is spent in this routine.
+
+   Entry assumptions:
+
+        state->mode == LEN
+        strm->avail_in >= 6
+        strm->avail_out >= 258
+        start >= strm->avail_out
+        state->bits < 8
+
+   On return, state->mode is one of:
+
+        LEN -- ran out of enough output space or enough available input
+        TYPE -- reached end of block code, inflate() to interpret next block
+        BAD -- error in block data
+
+   Notes:
+
+    - The maximum input bits used by a length/distance pair is 15 bits for the
+      length code, 5 bits for the length extra, 15 bits for the distance code,
+      and 13 bits for the distance extra.  This totals 48 bits, or six bytes.
+      Therefore if strm->avail_in >= 6, then there is enough input to avoid
+      checking for available input while decoding.
+
+    - The maximum bytes that a single length/distance pair can output is 258
+      bytes, which is the maximum length that can be coded.  inflate_fast()
+      requires strm->avail_out >= 258 for each loop to avoid checking for
+      output space.
+ */
+
+
+
+    typedef struct inffast_ar {
+/* 64   32                               x86  x86_64 */
+/* ar offset                              register */
+/*  0    0 */ void *esp;                /* esp save */
+/*  8    4 */ void *ebp;                /* ebp save */
+/* 16    8 */ unsigned char FAR *in;    /* esi rsi  local strm->next_in */
+/* 24   12 */ unsigned char FAR *last;  /*     r9   while in < last */
+/* 32   16 */ unsigned char FAR *out;   /* edi rdi  local strm->next_out */
+/* 40   20 */ unsigned char FAR *beg;   /*          inflate()'s init next_out */
+/* 48   24 */ unsigned char FAR *end;   /*     r10  while out < end */
+/* 56   28 */ unsigned char FAR *window;/*          size of window, wsize!=0 */
+/* 64   32 */ code const FAR *lcode;    /* ebp rbp  local strm->lencode */
+/* 72   36 */ code const FAR *dcode;    /*     r11  local strm->distcode */
+/* 80   40 */ size_t /*unsigned long */hold;       /* edx rdx  local strm->hold */
+/* 88   44 */ unsigned bits;            /* ebx rbx  local strm->bits */
+/* 92   48 */ unsigned wsize;           /*          window size */
+/* 96   52 */ unsigned write;           /*          window write index */
+/*100   56 */ unsigned lmask;           /*     r12  mask for lcode */
+/*104   60 */ unsigned dmask;           /*     r13  mask for dcode */
+/*108   64 */ unsigned len;             /*     r14  match length */
+/*112   68 */ unsigned dist;            /*     r15  match distance */
+/*116   72 */ unsigned status;          /*          set when state chng*/
+    } type_ar;
+#ifdef ASMINF
+
+void inflate_fast(strm, start)
+z_streamp strm;
+unsigned start;         /* inflate()'s starting value for strm->avail_out */
+{
+    struct inflate_state FAR *state;
+    type_ar ar;
+    void inffas8664fnc(struct inffast_ar * par);
+
+
+
+#if (defined( __GNUC__ ) && defined( __amd64__ ) && ! defined( __i386 )) || (defined(_MSC_VER) && defined(_M_AMD64))
+#define PAD_AVAIL_IN 6
+#define PAD_AVAIL_OUT 258
+#else
+#define PAD_AVAIL_IN 5
+#define PAD_AVAIL_OUT 257
+#endif
+
+    /* copy state to local variables */
+    state = (struct inflate_state FAR *)strm->state;
+
+    ar.in = strm->next_in;
+    ar.last = ar.in + (strm->avail_in - PAD_AVAIL_IN);
+    ar.out = strm->next_out;
+    ar.beg = ar.out - (start - strm->avail_out);
+    ar.end = ar.out + (strm->avail_out - PAD_AVAIL_OUT);
+    ar.wsize = state->wsize;
+    ar.write = state->wnext;
+    ar.window = state->window;
+    ar.hold = state->hold;
+    ar.bits = state->bits;
+    ar.lcode = state->lencode;
+    ar.dcode = state->distcode;
+    ar.lmask = (1U << state->lenbits) - 1;
+    ar.dmask = (1U << state->distbits) - 1;
+
+    /* decode literals and length/distances until end-of-block or not enough
+       input data or output space */
+
+    /* align in on 1/2 hold size boundary */
+    while (((size_t)(void *)ar.in & (sizeof(ar.hold) / 2 - 1)) != 0) {
+        ar.hold += (unsigned long)*ar.in++ << ar.bits;
+        ar.bits += 8;
+    }
+
+    inffas8664fnc(&ar);
+
+    if (ar.status > 1) {
+        if (ar.status == 2)
+            strm->msg = "invalid literal/length code";
+        else if (ar.status == 3)
+            strm->msg = "invalid distance code";
+        else
+            strm->msg = "invalid distance too far back";
+        state->mode = BAD;
+    }
+    else if ( ar.status == 1 ) {
+        state->mode = TYPE;
+    }
+
+    /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
+    ar.len = ar.bits >> 3;
+    ar.in -= ar.len;
+    ar.bits -= ar.len << 3;
+    ar.hold &= (1U << ar.bits) - 1;
+
+    /* update state and return */
+    strm->next_in = ar.in;
+    strm->next_out = ar.out;
+    strm->avail_in = (unsigned)(ar.in < ar.last ?
+                                PAD_AVAIL_IN + (ar.last - ar.in) :
+                                PAD_AVAIL_IN - (ar.in - ar.last));
+    strm->avail_out = (unsigned)(ar.out < ar.end ?
+                                 PAD_AVAIL_OUT + (ar.end - ar.out) :
+                                 PAD_AVAIL_OUT - (ar.out - ar.end));
+    state->hold = (unsigned long)ar.hold;
+    state->bits = ar.bits;
+    return;
+}
+
+#endif

contrib/masmx64/inffasx64.asm

@@ -0,0 +1,396 @@
+; inffasx64.asm is a hand tuned assembler version of inffast.c - fast decoding
+; version for AMD64 on Windows using Microsoft C compiler
+;
+; inffasx64.asm is automatically convert from AMD64 portion of inffas86.c
+; inffasx64.asm is called by inffas8664.c, which contain more info.
+
+
+; to compile this file, I use option
+;   ml64.exe /Flinffasx64 /c /Zi inffasx64.asm
+;   with Microsoft Macro Assembler (x64) for AMD64
+;
+
+; This file compile with Microsoft Macro Assembler (x64) for AMD64
+;
+;   ml64.exe is given with Visual Studio 2005/2008/2010 and Windows WDK
+;
+;   (you can get Windows WDK with ml64 for AMD64 from
+;      http://www.microsoft.com/whdc/Devtools/wdk/default.mspx for low price)
+;
+
+
+.code
+inffas8664fnc PROC
+
+; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and
+; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp
+;
+; All registers must be preserved across the call, except for
+;   rax, rcx, rdx, r8, r-9, r10, and r11, which are scratch.
+
+
+	mov [rsp-8],rsi
+	mov [rsp-16],rdi
+	mov [rsp-24],r12
+	mov [rsp-32],r13
+	mov [rsp-40],r14
+	mov [rsp-48],r15
+	mov [rsp-56],rbx
+
+	mov rax,rcx
+
+	mov	[rax+8], rbp       ; /* save regs rbp and rsp */
+	mov	[rax], rsp
+
+	mov	rsp, rax          ; /* make rsp point to &ar */
+
+	mov	rsi, [rsp+16]      ; /* rsi  = in */
+	mov	rdi, [rsp+32]      ; /* rdi  = out */
+	mov	r9, [rsp+24]       ; /* r9   = last */
+	mov	r10, [rsp+48]      ; /* r10  = end */
+	mov	rbp, [rsp+64]      ; /* rbp  = lcode */
+	mov	r11, [rsp+72]      ; /* r11  = dcode */
+	mov	rdx, [rsp+80]      ; /* rdx  = hold */
+	mov	ebx, [rsp+88]      ; /* ebx  = bits */
+	mov	r12d, [rsp+100]    ; /* r12d = lmask */
+	mov	r13d, [rsp+104]    ; /* r13d = dmask */
+                                          ; /* r14d = len */
+                                          ; /* r15d = dist */
+
+
+	cld
+	cmp	r10, rdi
+	je	L_one_time           ; /* if only one decode left */
+	cmp	r9, rsi
+
+    jne L_do_loop
+
+
+L_one_time:
+	mov	r8, r12           ; /* r8 = lmask */
+	cmp	bl, 32
+	ja	L_get_length_code_one_time
+
+	lodsd                         ; /* eax = *(uint *)in++ */
+	mov	cl, bl            ; /* cl = bits, needs it for shifting */
+	add	bl, 32             ; /* bits += 32 */
+	shl	rax, cl
+	or	rdx, rax          ; /* hold |= *((uint *)in)++ << bits */
+	jmp	L_get_length_code_one_time
+
+ALIGN 4
+L_while_test:
+	cmp	r10, rdi
+	jbe	L_break_loop
+	cmp	r9, rsi
+	jbe	L_break_loop
+
+L_do_loop:
+	mov	r8, r12           ; /* r8 = lmask */
+	cmp	bl, 32
+	ja	L_get_length_code    ; /* if (32 < bits) */
+
+	lodsd                         ; /* eax = *(uint *)in++ */
+	mov	cl, bl            ; /* cl = bits, needs it for shifting */
+	add	bl, 32             ; /* bits += 32 */
+	shl	rax, cl
+	or	rdx, rax          ; /* hold |= *((uint *)in)++ << bits */
+
+L_get_length_code:
+	and	r8, rdx            ; /* r8 &= hold */
+	mov	eax, [rbp+r8*4]  ; /* eax = lcode[hold & lmask] */
+
+	mov	cl, ah            ; /* cl = this.bits */
+	sub	bl, ah            ; /* bits -= this.bits */
+	shr	rdx, cl           ; /* hold >>= this.bits */
+
+	test	al, al
+	jnz	L_test_for_length_base ; /* if (op != 0) 45.7% */
+
+	mov	r8, r12            ; /* r8 = lmask */
+	shr	eax, 16            ; /* output this.val char */
+	stosb
+
+L_get_length_code_one_time:
+	and	r8, rdx            ; /* r8 &= hold */
+	mov	eax, [rbp+r8*4] ; /* eax = lcode[hold & lmask] */
+
+L_dolen:
+	mov	cl, ah            ; /* cl = this.bits */
+	sub	bl, ah            ; /* bits -= this.bits */
+	shr	rdx, cl           ; /* hold >>= this.bits */
+
+	test	al, al
+	jnz	L_test_for_length_base ; /* if (op != 0) 45.7% */
+
+	shr	eax, 16            ; /* output this.val char */
+	stosb
+	jmp	L_while_test
+
+ALIGN 4
+L_test_for_length_base:
+	mov	r14d, eax         ; /* len = this */
+	shr	r14d, 16           ; /* len = this.val */
+	mov	cl, al
+
+	test	al, 16
+	jz	L_test_for_second_level_length ; /* if ((op & 16) == 0) 8% */
+	and	cl, 15             ; /* op &= 15 */
+	jz	L_decode_distance    ; /* if (!op) */
+
+L_add_bits_to_len:
+	sub	bl, cl
+	xor	eax, eax
+	inc	eax
+	shl	eax, cl
+	dec	eax
+	and	eax, edx          ; /* eax &= hold */
+	shr	rdx, cl
+	add	r14d, eax         ; /* len += hold & mask[op] */
+
+L_decode_distance:
+	mov	r8, r13           ; /* r8 = dmask */
+	cmp	bl, 32
+	ja	L_get_distance_code  ; /* if (32 < bits) */
+
+	lodsd                         ; /* eax = *(uint *)in++ */
+	mov	cl, bl            ; /* cl = bits, needs it for shifting */
+	add	bl, 32             ; /* bits += 32 */
+	shl	rax, cl
+	or	rdx, rax          ; /* hold |= *((uint *)in)++ << bits */
+
+L_get_distance_code:
+	and	r8, rdx           ; /* r8 &= hold */
+	mov	eax, [r11+r8*4] ; /* eax = dcode[hold & dmask] */
+
+L_dodist:
+	mov	r15d, eax         ; /* dist = this */
+	shr	r15d, 16           ; /* dist = this.val */
+	mov	cl, ah
+	sub	bl, ah            ; /* bits -= this.bits */
+	shr	rdx, cl           ; /* hold >>= this.bits */
+	mov	cl, al            ; /* cl = this.op */
+
+	test	al, 16             ; /* if ((op & 16) == 0) */
+	jz	L_test_for_second_level_dist
+	and	cl, 15             ; /* op &= 15 */
+	jz	L_check_dist_one
+
+L_add_bits_to_dist:
+	sub	bl, cl
+	xor	eax, eax
+	inc	eax
+	shl	eax, cl
+	dec	eax                 ; /* (1 << op) - 1 */
+	and	eax, edx          ; /* eax &= hold */
+	shr	rdx, cl
+	add	r15d, eax         ; /* dist += hold & ((1 << op) - 1) */
+
+L_check_window:
+	mov	r8, rsi           ; /* save in so from can use it's reg */
+	mov	rax, rdi
+	sub	rax, [rsp+40]      ; /* nbytes = out - beg */
+
+	cmp	eax, r15d
+	jb	L_clip_window        ; /* if (dist > nbytes) 4.2% */
+
+	mov	ecx, r14d         ; /* ecx = len */
+	mov	rsi, rdi
+	sub	rsi, r15          ; /* from = out - dist */
+
+	sar	ecx, 1
+	jnc	L_copy_two           ; /* if len % 2 == 0 */
+
+	rep     movsw
+	mov	al, [rsi]
+	mov	[rdi], al
+	inc	rdi
+
+	mov	rsi, r8           ; /* move in back to %rsi, toss from */
+	jmp	L_while_test
+
+L_copy_two:
+	rep     movsw
+	mov	rsi, r8           ; /* move in back to %rsi, toss from */
+	jmp	L_while_test
+
+ALIGN 4
+L_check_dist_one:
+	cmp	r15d, 1            ; /* if dist 1, is a memset */
+	jne	L_check_window
+	cmp	[rsp+40], rdi      ; /* if out == beg, outside window */
+	je	L_check_window
+
+	mov	ecx, r14d         ; /* ecx = len */
+	mov	al, [rdi-1]
+	mov	ah, al
+
+	sar	ecx, 1
+	jnc	L_set_two
+	mov	[rdi], al
+	inc	rdi
+
+L_set_two:
+	rep     stosw
+	jmp	L_while_test
+
+ALIGN 4
+L_test_for_second_level_length:
+	test	al, 64
+	jnz	L_test_for_end_of_block ; /* if ((op & 64) != 0) */
+
+	xor	eax, eax
+	inc	eax
+	shl	eax, cl
+	dec	eax
+	and	eax, edx         ; /* eax &= hold */
+	add	eax, r14d        ; /* eax += len */
+	mov	eax, [rbp+rax*4] ; /* eax = lcode[val+(hold&mask[op])]*/
+	jmp	L_dolen
+
+ALIGN 4
+L_test_for_second_level_dist:
+	test	al, 64
+	jnz	L_invalid_distance_code ; /* if ((op & 64) != 0) */
+
+	xor	eax, eax
+	inc	eax
+	shl	eax, cl
+	dec	eax
+	and	eax, edx         ; /* eax &= hold */
+	add	eax, r15d        ; /* eax += dist */
+	mov	eax, [r11+rax*4] ; /* eax = dcode[val+(hold&mask[op])]*/
+	jmp	L_dodist
+
+ALIGN 4
+L_clip_window:
+	mov	ecx, eax         ; /* ecx = nbytes */
+	mov	eax, [rsp+92]     ; /* eax = wsize, prepare for dist cmp */
+	neg	ecx                ; /* nbytes = -nbytes */
+
+	cmp	eax, r15d
+	jb	L_invalid_distance_too_far ; /* if (dist > wsize) */
+
+	add	ecx, r15d         ; /* nbytes = dist - nbytes */
+	cmp	dword ptr [rsp+96], 0
+	jne	L_wrap_around_window ; /* if (write != 0) */
+
+	mov	rsi, [rsp+56]     ; /* from  = window */
+	sub	eax, ecx         ; /* eax  -= nbytes */
+	add	rsi, rax         ; /* from += wsize - nbytes */
+
+	mov	eax, r14d        ; /* eax = len */
+	cmp	r14d, ecx
+	jbe	L_do_copy           ; /* if (nbytes >= len) */
+
+	sub	eax, ecx         ; /* eax -= nbytes */
+	rep     movsb
+	mov	rsi, rdi
+	sub	rsi, r15         ; /* from = &out[ -dist ] */
+	jmp	L_do_copy
+
+ALIGN 4
+L_wrap_around_window:
+	mov	eax, [rsp+96]     ; /* eax = write */
+	cmp	ecx, eax
+	jbe	L_contiguous_in_window ; /* if (write >= nbytes) */
+
+	mov	esi, [rsp+92]     ; /* from  = wsize */
+	add	rsi, [rsp+56]     ; /* from += window */
+	add	rsi, rax         ; /* from += write */
+	sub	rsi, rcx         ; /* from -= nbytes */
+	sub	ecx, eax         ; /* nbytes -= write */
+
+	mov	eax, r14d        ; /* eax = len */
+	cmp	eax, ecx
+	jbe	L_do_copy           ; /* if (nbytes >= len) */
+
+	sub	eax, ecx         ; /* len -= nbytes */
+	rep     movsb
+	mov	rsi, [rsp+56]     ; /* from = window */
+	mov	ecx, [rsp+96]     ; /* nbytes = write */
+	cmp	eax, ecx
+	jbe	L_do_copy           ; /* if (nbytes >= len) */
+
+	sub	eax, ecx         ; /* len -= nbytes */
+	rep     movsb
+	mov	rsi, rdi
+	sub	rsi, r15         ; /* from = out - dist */
+	jmp	L_do_copy
+
+ALIGN 4
+L_contiguous_in_window:
+	mov	rsi, [rsp+56]     ; /* rsi = window */
+	add	rsi, rax
+	sub	rsi, rcx         ; /* from += write - nbytes */
+
+	mov	eax, r14d        ; /* eax = len */
+	cmp	eax, ecx
+	jbe	L_do_copy           ; /* if (nbytes >= len) */
+
+	sub	eax, ecx         ; /* len -= nbytes */
+	rep     movsb
+	mov	rsi, rdi
+	sub	rsi, r15         ; /* from = out - dist */
+	jmp	L_do_copy           ; /* if (nbytes >= len) */
+
+ALIGN 4
+L_do_copy:
+	mov	ecx, eax         ; /* ecx = len */
+	rep     movsb
+
+	mov	rsi, r8          ; /* move in back to %esi, toss from */
+	jmp	L_while_test
+
+L_test_for_end_of_block:
+	test	al, 32
+	jz	L_invalid_literal_length_code
+	mov	dword ptr [rsp+116], 1
+	jmp	L_break_loop_with_status
+
+L_invalid_literal_length_code:
+	mov	dword ptr [rsp+116], 2
+	jmp	L_break_loop_with_status
+
+L_invalid_distance_code:
+	mov	dword ptr [rsp+116], 3
+	jmp	L_break_loop_with_status
+
+L_invalid_distance_too_far:
+	mov	dword ptr [rsp+116], 4
+	jmp	L_break_loop_with_status
+
+L_break_loop:
+	mov	dword ptr [rsp+116], 0
+
+L_break_loop_with_status:
+; /* put in, out, bits, and hold back into ar and pop esp */
+	mov	[rsp+16], rsi     ; /* in */
+	mov	[rsp+32], rdi     ; /* out */
+	mov	[rsp+88], ebx     ; /* bits */
+	mov	[rsp+80], rdx     ; /* hold */
+
+	mov	rax, [rsp]       ; /* restore rbp and rsp */
+	mov	rbp, [rsp+8]
+	mov	rsp, rax
+
+
+
+	mov rsi,[rsp-8]
+	mov rdi,[rsp-16]
+	mov r12,[rsp-24]
+	mov r13,[rsp-32]
+	mov r14,[rsp-40]
+	mov r15,[rsp-48]
+	mov rbx,[rsp-56]
+
+    ret 0
+;          :
+;          : "m" (ar)
+;          : "memory", "%rax", "%rbx", "%rcx", "%rdx", "%rsi", "%rdi",
+;            "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "%r14", "%r15"
+;    );
+
+inffas8664fnc 	ENDP
+;_TEXT	ENDS
+END

contrib/masmx64/readme.txt

@@ -0,0 +1,31 @@
+Summary
+-------
+This directory contains ASM implementations of the functions
+longest_match() and inflate_fast(), for 64 bits x86 (both AMD64 and Intel EM64t),
+for use with Microsoft Macro Assembler (x64) for AMD64 and Microsoft C++ 64 bits.
+
+gvmat64.asm is written by Gilles Vollant (2005), by using Brian Raiter 686/32 bits
+   assembly optimized version from Jean-loup Gailly original longest_match function
+
+inffasx64.asm and inffas8664.c were written by Chris Anderson, by optimizing
+   original function from Mark Adler
+
+Use instructions
+----------------
+Assemble the .asm files using MASM and put the object files into the zlib source
+directory.  You can also get object files here:
+
+     http://www.winimage.com/zLibDll/zlib124_masm_obj.zip
+
+define ASMV and ASMINF in your project. Include inffas8664.c in your source tree,
+and inffasx64.obj and gvmat64.obj as object to link.
+
+
+Build instructions
+------------------
+run bld_64.bat with Microsoft Macro Assembler (x64) for AMD64 (ml64.exe)
+
+ml64.exe is given with Visual Studio 2005, Windows 2003 server DDK
+
+You can get Windows 2003 server DDK with ml64 and cl for AMD64 from
+  http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price)

contrib/masmx86/bld_ml32.bat

@@ -0,0 +1,2 @@
+ml /coff /Zi /c /Flmatch686.lst match686.asm
+ml /coff /Zi /c /Flinffas32.lst inffas32.asm

contrib/masmx86/gvmat32.asm

@@ -1,905 +0,0 @@
-;
-; gvmat32.asm -- Asm portion of the optimized longest_match for 32 bits x86
-; Copyright (C) 1995-1996 Jean-loup Gailly and Gilles Vollant.
-; File written by Gilles Vollant, by modifiying the longest_match
-;  from Jean-loup Gailly in deflate.c
-; It need wmask == 0x7fff
-;     (assembly code is faster with a fixed wmask)
-;
-; For Visual C++ 4.2 and ML 6.11c (version in directory \MASM611C of Win95 DDK)
-;   I compile with : "ml /coff /Zi /c gvmat32.asm"
-;
-
-;uInt longest_match_7fff(s, cur_match)
-;    deflate_state *s;
-;    IPos cur_match;                             /* current match */
-
-	NbStack         equ     76
-	cur_match       equ     dword ptr[esp+NbStack-0]
-	str_s           equ     dword ptr[esp+NbStack-4]
-; 5 dword on top (ret,ebp,esi,edi,ebx)
-	adrret          equ     dword ptr[esp+NbStack-8]
-	pushebp         equ     dword ptr[esp+NbStack-12]
-	pushedi         equ     dword ptr[esp+NbStack-16]
-	pushesi         equ     dword ptr[esp+NbStack-20]
-	pushebx         equ     dword ptr[esp+NbStack-24]
-
-	chain_length    equ     dword ptr [esp+NbStack-28]
-	limit           equ     dword ptr [esp+NbStack-32]
-	best_len        equ     dword ptr [esp+NbStack-36]
-	window          equ     dword ptr [esp+NbStack-40]
-	prev            equ     dword ptr [esp+NbStack-44]
-	scan_start      equ      word ptr [esp+NbStack-48]
-	wmask           equ     dword ptr [esp+NbStack-52]
-	match_start_ptr equ     dword ptr [esp+NbStack-56]
-	nice_match      equ     dword ptr [esp+NbStack-60]
-	scan            equ     dword ptr [esp+NbStack-64]
-
-	windowlen       equ     dword ptr [esp+NbStack-68]
-	match_start     equ     dword ptr [esp+NbStack-72]
-	strend          equ     dword ptr [esp+NbStack-76]
-	NbStackAdd      equ     (NbStack-24)
-
-    .386p
-
-    name    gvmatch
-    .MODEL  FLAT
-
-
-
-;  all the +4 offsets are due to the addition of pending_buf_size (in zlib
-;  in the deflate_state structure since the asm code was first written
-;  (if you compile with zlib 1.0.4 or older, remove the +4).
-;  Note : these value are good with a 8 bytes boundary pack structure
-    dep_chain_length    equ     70h+4
-    dep_window          equ     2ch+4
-    dep_strstart        equ     60h+4
-    dep_prev_length     equ     6ch+4
-    dep_nice_match      equ     84h+4
-    dep_w_size          equ     20h+4
-    dep_prev            equ     34h+4
-    dep_w_mask          equ     28h+4
-    dep_good_match      equ     80h+4
-    dep_match_start     equ     64h+4
-    dep_lookahead       equ     68h+4
-
-
-_TEXT                   segment
-
-IFDEF NOUNDERLINE
-			public  longest_match_7fff
-			public  longest_match_686
-;                        public  match_init
-ELSE
-			public  _longest_match_7fff
-			public  _longest_match_686
-;                        public  _match_init
-ENDIF
-
-    MAX_MATCH           equ     258
-    MIN_MATCH           equ     3
-    MIN_LOOKAHEAD       equ     (MAX_MATCH+MIN_MATCH+1)
-
-
-
-IFDEF NOUNDERLINE
-;match_init      proc near
-;                ret
-;match_init      endp
-ELSE
-;_match_init     proc near
-;                ret
-;_match_init     endp
-ENDIF
-
-
-IFDEF NOUNDERLINE
-longest_match_7fff   proc near
-ELSE
-_longest_match_7fff  proc near
-ENDIF
-
-	mov     edx,[esp+4]
-
-
-
-	push    ebp
-	push    edi
-	push    esi
-	push    ebx
-
-	sub     esp,NbStackAdd
-
-; initialize or check the variables used in match.asm.
-	mov     ebp,edx
-
-; chain_length = s->max_chain_length
-; if (prev_length>=good_match) chain_length >>= 2
-	mov     edx,[ebp+dep_chain_length]
-	mov     ebx,[ebp+dep_prev_length]
-	cmp     [ebp+dep_good_match],ebx
-	ja      noshr
-	shr     edx,2
-noshr:
-; we increment chain_length because in the asm, the --chain_lenght is in the beginning of the loop
-	inc     edx
-	mov     edi,[ebp+dep_nice_match]
-	mov     chain_length,edx
-	mov     eax,[ebp+dep_lookahead]
-	cmp     eax,edi
-; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
-	jae     nolookaheadnicematch
-	mov     edi,eax
-nolookaheadnicematch:
-; best_len = s->prev_length
-	mov     best_len,ebx
-
-; window = s->window
-	mov     esi,[ebp+dep_window]
-	mov     ecx,[ebp+dep_strstart]
-	mov     window,esi
-
-	mov     nice_match,edi
-; scan = window + strstart
-	add     esi,ecx
-	mov     scan,esi
-; dx = *window
-	mov     dx,word ptr [esi]
-; bx = *(window+best_len-1)
-	mov     bx,word ptr [esi+ebx-1]
-	add     esi,MAX_MATCH-1
-; scan_start = *scan
-	mov     scan_start,dx
-; strend = scan + MAX_MATCH-1
-	mov     strend,esi
-; bx = scan_end = *(window+best_len-1)
-
-;    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
-;        s->strstart - (IPos)MAX_DIST(s) : NIL;
-
-	mov     esi,[ebp+dep_w_size]
-	sub     esi,MIN_LOOKAHEAD
-; here esi = MAX_DIST(s)
-	sub     ecx,esi
-	ja      nodist
-	xor     ecx,ecx
-nodist:
-	mov     limit,ecx
-
-; prev = s->prev
-	mov     edx,[ebp+dep_prev]
-	mov     prev,edx
-
-;
-	mov     edx,dword ptr [ebp+dep_match_start]
-	mov     bp,scan_start
-	mov     eax,cur_match
-	mov     match_start,edx
-
-	mov     edx,window
-	mov     edi,edx
-	add     edi,best_len
-	mov     esi,prev
-	dec     edi
-; windowlen = window + best_len -1
-	mov     windowlen,edi
-
-	jmp     beginloop2
-	align   4
-
-; here, in the loop
-;       eax = ax = cur_match
-;       ecx = limit
-;        bx = scan_end
-;        bp = scan_start
-;       edi = windowlen (window + best_len -1)
-;       esi = prev
-
-
-;// here; chain_length <=16
-normalbeg0add16:
-	add     chain_length,16
-	jz      exitloop
-normalbeg0:
-	cmp     word ptr[edi+eax],bx
-	je      normalbeg2noroll
-rcontlabnoroll:
-; cur_match = prev[cur_match & wmask]
-	and     eax,7fffh
-	mov     ax,word ptr[esi+eax*2]
-; if cur_match > limit, go to exitloop
-	cmp     ecx,eax
-	jnb     exitloop
-; if --chain_length != 0, go to exitloop
-	dec     chain_length
-	jnz     normalbeg0
-	jmp     exitloop
-
-normalbeg2noroll:
-; if (scan_start==*(cur_match+window)) goto normalbeg2
-	cmp     bp,word ptr[edx+eax]
-	jne     rcontlabnoroll
-	jmp     normalbeg2
-
-contloop3:
-	mov     edi,windowlen
-
-; cur_match = prev[cur_match & wmask]
-	and     eax,7fffh
-	mov     ax,word ptr[esi+eax*2]
-; if cur_match > limit, go to exitloop
-	cmp     ecx,eax
-jnbexitloopshort1:
-	jnb     exitloop
-; if --chain_length != 0, go to exitloop
-
-
-; begin the main loop
-beginloop2:
-	sub     chain_length,16+1
-; if chain_length <=16, don't use the unrolled loop
-	jna     normalbeg0add16
-
-do16:
-	cmp     word ptr[edi+eax],bx
-	je      normalbeg2dc0
-
-maccn   MACRO   lab
-	and     eax,7fffh
-	mov     ax,word ptr[esi+eax*2]
-	cmp     ecx,eax
-	jnb     exitloop
-	cmp     word ptr[edi+eax],bx
-	je      lab
-	ENDM
-
-rcontloop0:
-	maccn   normalbeg2dc1
-
-rcontloop1:
-	maccn   normalbeg2dc2
-
-rcontloop2:
-	maccn   normalbeg2dc3
-
-rcontloop3:
-	maccn   normalbeg2dc4
-
-rcontloop4:
-	maccn   normalbeg2dc5
-
-rcontloop5:
-	maccn   normalbeg2dc6
-
-rcontloop6:
-	maccn   normalbeg2dc7
-
-rcontloop7:
-	maccn   normalbeg2dc8
-
-rcontloop8:
-	maccn   normalbeg2dc9
-
-rcontloop9:
-	maccn   normalbeg2dc10
-
-rcontloop10:
-	maccn   short normalbeg2dc11
-
-rcontloop11:
-	maccn   short normalbeg2dc12
-
-rcontloop12:
-	maccn   short normalbeg2dc13
-
-rcontloop13:
-	maccn   short normalbeg2dc14
-
-rcontloop14:
-	maccn   short normalbeg2dc15
-
-rcontloop15:
-	and     eax,7fffh
-	mov     ax,word ptr[esi+eax*2]
-	cmp     ecx,eax
-	jnb     exitloop
-
-	sub     chain_length,16
-	ja      do16
-	jmp     normalbeg0add16
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-normbeg MACRO   rcontlab,valsub
-; if we are here, we know that *(match+best_len-1) == scan_end
-	cmp     bp,word ptr[edx+eax]
-; if (match != scan_start) goto rcontlab
-	jne     rcontlab
-; calculate the good chain_length, and we'll compare scan and match string
-	add     chain_length,16-valsub
-	jmp     iseq
-	ENDM
-
-
-normalbeg2dc11:
-	normbeg rcontloop11,11
-
-normalbeg2dc12:
-	normbeg short rcontloop12,12
-
-normalbeg2dc13:
-	normbeg short rcontloop13,13
-
-normalbeg2dc14:
-	normbeg short rcontloop14,14
-
-normalbeg2dc15:
-	normbeg short rcontloop15,15
-
-normalbeg2dc10:
-	normbeg rcontloop10,10
-
-normalbeg2dc9:
-	normbeg rcontloop9,9
-
-normalbeg2dc8:
-	normbeg rcontloop8,8
-
-normalbeg2dc7:
-	normbeg rcontloop7,7
-
-normalbeg2dc6:
-	normbeg rcontloop6,6
-
-normalbeg2dc5:
-	normbeg rcontloop5,5
-
-normalbeg2dc4:
-	normbeg rcontloop4,4
-
-normalbeg2dc3:
-	normbeg rcontloop3,3
-
-normalbeg2dc2:
-	normbeg rcontloop2,2
-
-normalbeg2dc1:
-	normbeg rcontloop1,1
-
-normalbeg2dc0:
-	normbeg rcontloop0,0
-
-
-; we go in normalbeg2 because *(ushf*)(match+best_len-1) == scan_end
-
-normalbeg2:
-	mov     edi,window
-
-	cmp     bp,word ptr[edi+eax]
-	jne     contloop3                   ; if *(ushf*)match != scan_start, continue
-
-iseq:
-; if we are here, we know that *(match+best_len-1) == scan_end
-; and (match == scan_start)
-
-	mov     edi,edx
-	mov     esi,scan                    ; esi = scan
-	add     edi,eax                     ; edi = window + cur_match = match
-
-	mov     edx,[esi+3]                 ; compare manually dword at match+3
-	xor     edx,[edi+3]                 ; and scan +3
-
-	jz      begincompare                ; if equal, go to long compare
-
-; we will determine the unmatch byte and calculate len (in esi)
-	or      dl,dl
-	je      eq1rr
-	mov     esi,3
-	jmp     trfinval
-eq1rr:
-	or      dx,dx
-	je      eq1
-
-	mov     esi,4
-	jmp     trfinval
-eq1:
-	and     edx,0ffffffh
-	jz      eq11
-	mov     esi,5
-	jmp     trfinval
-eq11:
-	mov     esi,6
-	jmp     trfinval
-
-begincompare:
-	; here we now scan and match begin same
-	add     edi,6
-	add     esi,6
-	mov     ecx,(MAX_MATCH-(2+4))/4     ; scan for at most MAX_MATCH bytes
-	repe    cmpsd                       ; loop until mismatch
-
-	je      trfin                       ; go to trfin if not unmatch
-; we determine the unmatch byte
-	sub     esi,4
-	mov     edx,[edi-4]
-	xor     edx,[esi]
-
-	or      dl,dl
-	jnz     trfin
-	inc     esi
-
-	or      dx,dx
-	jnz     trfin
-	inc     esi
-
-	and     edx,0ffffffh
-	jnz     trfin
-	inc     esi
-
-trfin:
-	sub     esi,scan          ; esi = len
-trfinval:
-; here we have finised compare, and esi contain len of equal string
-	cmp     esi,best_len        ; if len > best_len, go newbestlen
-	ja      short newbestlen
-; now we restore edx, ecx and esi, for the big loop
-	mov     esi,prev
-	mov     ecx,limit
-	mov     edx,window
-	jmp     contloop3
-
-newbestlen:
-	mov     best_len,esi        ; len become best_len
-
-	mov     match_start,eax     ; save new position as match_start
-	cmp     esi,nice_match      ; if best_len >= nice_match, exit
-	jae     exitloop
-	mov     ecx,scan
-	mov     edx,window          ; restore edx=window
-	add     ecx,esi
-	add     esi,edx
-
-	dec     esi
-	mov     windowlen,esi       ; windowlen = window + best_len-1
-	mov     bx,[ecx-1]          ; bx = *(scan+best_len-1) = scan_end
-
-; now we restore ecx and esi, for the big loop :
-	mov     esi,prev
-	mov     ecx,limit
-	jmp     contloop3
-
-exitloop:
-; exit : s->match_start=match_start
-	mov     ebx,match_start
-	mov     ebp,str_s
-	mov     ecx,best_len
-	mov     dword ptr [ebp+dep_match_start],ebx
-	mov     eax,dword ptr [ebp+dep_lookahead]
-	cmp     ecx,eax
-	ja      minexlo
-	mov     eax,ecx
-minexlo:
-; return min(best_len,s->lookahead)
-
-; restore stack and register ebx,esi,edi,ebp
-	add     esp,NbStackAdd
-
-	pop     ebx
-	pop     esi
-	pop     edi
-	pop     ebp
-	ret
-InfoAuthor:
-; please don't remove this string !
-; Your are free use gvmat32 in any fre or commercial apps if you don't remove the string in the binary!
-	db     0dh,0ah,"GVMat32 optimised assembly code written 1996-98 by Gilles Vollant",0dh,0ah
-
-
-
-IFDEF NOUNDERLINE
-longest_match_7fff   endp
-ELSE
-_longest_match_7fff  endp
-ENDIF
-
-
-IFDEF NOUNDERLINE
-cpudetect32     proc near
-ELSE
-_cpudetect32    proc near
-ENDIF
-
-	push	ebx
-
-	pushfd                  ; push original EFLAGS
-	pop     eax             ; get original EFLAGS
-	mov     ecx, eax        ; save original EFLAGS
-	xor     eax, 40000h     ; flip AC bit in EFLAGS
-	push    eax             ; save new EFLAGS value on stack
-	popfd                   ; replace current EFLAGS value
-	pushfd                  ; get new EFLAGS
-	pop     eax             ; store new EFLAGS in EAX
-	xor     eax, ecx        ; can<61>t toggle AC bit, processor=80386
-	jz      end_cpu_is_386  ; jump if 80386 processor
-	push    ecx
-	popfd                   ; restore AC bit in EFLAGS first
-
-	pushfd
-	pushfd
-	pop     ecx
-
-	mov     eax, ecx        ; get original EFLAGS
-	xor     eax, 200000h    ; flip ID bit in EFLAGS
-	push    eax             ; save new EFLAGS value on stack
-	popfd                   ; replace current EFLAGS value
-	pushfd                  ; get new EFLAGS
-	pop		eax	            ; store new EFLAGS in EAX
-	popfd                   ; restore original EFLAGS
-	xor		eax, ecx        ; can<61>t toggle ID bit,
-	je		is_old_486		; processor=old
-
-	mov     eax,1
-	db      0fh,0a2h        ;CPUID
-
-exitcpudetect:
-	pop	ebx
-	ret
-
-end_cpu_is_386:
-	mov     eax,0300h
-	jmp     exitcpudetect
-
-is_old_486:
-	mov     eax,0400h
-	jmp     exitcpudetect
-
-IFDEF NOUNDERLINE
-cpudetect32     endp
-ELSE
-_cpudetect32    endp
-ENDIF
-
-
-
-
-MAX_MATCH       equ     258
-MIN_MATCH       equ     3
-MIN_LOOKAHEAD   equ     (MAX_MATCH + MIN_MATCH + 1)
-MAX_MATCH_8_     equ     ((MAX_MATCH + 7) AND 0FFF0h)
-
-
-;;; stack frame offsets
-
-chainlenwmask	equ  esp + 0	; high word: current chain len
-					; low word: s->wmask
-window		equ  esp + 4	; local copy of s->window
-windowbestlen	equ  esp + 8	; s->window + bestlen
-scanstart	equ  esp + 16	; first two bytes of string
-scanend		equ  esp + 12	; last two bytes of string
-scanalign	equ  esp + 20	; dword-misalignment of string
-nicematch	equ  esp + 24	; a good enough match size
-bestlen		equ  esp + 28	; size of best match so far
-scan		equ  esp + 32	; ptr to string wanting match
-
-LocalVarsSize	equ 36
-;	saved ebx	byte esp + 36
-;	saved edi	byte esp + 40
-;	saved esi	byte esp + 44
-;	saved ebp	byte esp + 48
-;	return address	byte esp + 52
-deflatestate	equ  esp + 56	; the function arguments
-curmatch	equ  esp + 60
-
-;;; Offsets for fields in the deflate_state structure. These numbers
-;;; are calculated from the definition of deflate_state, with the
-;;; assumption that the compiler will dword-align the fields. (Thus,
-;;; changing the definition of deflate_state could easily cause this
-;;; program to crash horribly, without so much as a warning at
-;;; compile time. Sigh.)
-
-dsWSize		equ 36
-dsWMask		equ 44
-dsWindow	equ 48
-dsPrev		equ 56
-dsMatchLen	equ 88
-dsPrevMatch	equ 92
-dsStrStart	equ 100
-dsMatchStart	equ 104
-dsLookahead	equ 108
-dsPrevLen	equ 112
-dsMaxChainLen	equ 116
-dsGoodMatch	equ 132
-dsNiceMatch	equ 136
-
-
-;;; match.asm -- Pentium-Pro-optimized version of longest_match()
-;;; Written for zlib 1.1.2
-;;; Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
-;;; You can look at http://www.muppetlabs.com/~breadbox/software/assembly.html
-;;;
-;;; This is free software; you can redistribute it and/or modify it
-;;; under the terms of the GNU General Public License.
-
-;GLOBAL	_longest_match, _match_init
-
-
-;SECTION	.text
-
-;;; uInt longest_match(deflate_state *deflatestate, IPos curmatch)
-
-;_longest_match:
-IFDEF NOUNDERLINE
-longest_match_686   proc near
-ELSE
-_longest_match_686  proc near
-ENDIF
-
-
-;;; Save registers that the compiler may be using, and adjust esp to
-;;; make room for our stack frame.
-
-		push	ebp
-		push	edi
-		push	esi
-		push	ebx
-		sub	esp, LocalVarsSize
-
-;;; Retrieve the function arguments. ecx will hold cur_match
-;;; throughout the entire function. edx will hold the pointer to the
-;;; deflate_state structure during the function's setup (before
-;;; entering the main loop.
-
-		mov	edx, [deflatestate]
-		mov	ecx, [curmatch]
-
-;;; uInt wmask = s->w_mask;
-;;; unsigned chain_length = s->max_chain_length;
-;;; if (s->prev_length >= s->good_match) {
-;;;     chain_length >>= 2;
-;;; }
-
-		mov	eax, [edx + dsPrevLen]
-		mov	ebx, [edx + dsGoodMatch]
-		cmp	eax, ebx
-		mov	eax, [edx + dsWMask]
-		mov	ebx, [edx + dsMaxChainLen]
-		jl	LastMatchGood
-		shr	ebx, 2
-LastMatchGood:
-
-;;; chainlen is decremented once beforehand so that the function can
-;;; use the sign flag instead of the zero flag for the exit test.
-;;; It is then shifted into the high word, to make room for the wmask
-;;; value, which it will always accompany.
-
-		dec	ebx
-		shl	ebx, 16
-		or	ebx, eax
-		mov	[chainlenwmask], ebx
-
-;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
-
-		mov	eax, [edx + dsNiceMatch]
-		mov	ebx, [edx + dsLookahead]
-		cmp	ebx, eax
-		jl	LookaheadLess
-		mov	ebx, eax
-LookaheadLess:	mov	[nicematch], ebx
-
-;;; register Bytef *scan = s->window + s->strstart;
-
-		mov	esi, [edx + dsWindow]
-		mov	[window], esi
-		mov	ebp, [edx + dsStrStart]
-		lea	edi, [esi + ebp]
-		mov	[scan], edi
-
-;;; Determine how many bytes the scan ptr is off from being
-;;; dword-aligned.
-
-		mov	eax, edi
-		neg	eax
-		and	eax, 3
-		mov	[scanalign], eax
-
-;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
-;;;     s->strstart - (IPos)MAX_DIST(s) : NIL;
-
-		mov	eax, [edx + dsWSize]
-		sub	eax, MIN_LOOKAHEAD
-		sub	ebp, eax
-		jg	LimitPositive
-		xor	ebp, ebp
-LimitPositive:
-
-;;; int best_len = s->prev_length;
-
-		mov	eax, [edx + dsPrevLen]
-		mov	[bestlen], eax
-
-;;; Store the sum of s->window + best_len in esi locally, and in esi.
-
-		add	esi, eax
-		mov	[windowbestlen], esi
-
-;;; register ush scan_start = *(ushf*)scan;
-;;; register ush scan_end   = *(ushf*)(scan+best_len-1);
-;;; Posf *prev = s->prev;
-
-		movzx	ebx, word ptr [edi]
-		mov	[scanstart], ebx
-		movzx	ebx, word ptr [edi + eax - 1]
-		mov	[scanend], ebx
-		mov	edi, [edx + dsPrev]
-
-;;; Jump into the main loop.
-
-		mov	edx, [chainlenwmask]
-		jmp	short LoopEntry
-
-align 4
-
-;;; do {
-;;;     match = s->window + cur_match;
-;;;     if (*(ushf*)(match+best_len-1) != scan_end ||
-;;;         *(ushf*)match != scan_start) continue;
-;;;     [...]
-;;; } while ((cur_match = prev[cur_match & wmask]) > limit
-;;;          && --chain_length != 0);
-;;;
-;;; Here is the inner loop of the function. The function will spend the
-;;; majority of its time in this loop, and majority of that time will
-;;; be spent in the first ten instructions.
-;;;
-;;; Within this loop:
-;;; ebx = scanend
-;;; ecx = curmatch
-;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
-;;; esi = windowbestlen - i.e., (window + bestlen)
-;;; edi = prev
-;;; ebp = limit
-
-LookupLoop:
-		and	ecx, edx
-		movzx	ecx, word ptr [edi + ecx*2]
-		cmp	ecx, ebp
-		jbe	LeaveNow
-		sub	edx, 00010000h
-		js	LeaveNow
-LoopEntry:	movzx	eax, word ptr [esi + ecx - 1]
-		cmp	eax, ebx
-		jnz	LookupLoop
-		mov	eax, [window]
-		movzx	eax, word ptr [eax + ecx]
-		cmp	eax, [scanstart]
-		jnz	LookupLoop
-
-;;; Store the current value of chainlen.
-
-		mov	[chainlenwmask], edx
-
-;;; Point edi to the string under scrutiny, and esi to the string we
-;;; are hoping to match it up with. In actuality, esi and edi are
-;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is
-;;; initialized to -(MAX_MATCH_8 - scanalign).
-
-		mov	esi, [window]
-		mov	edi, [scan]
-		add	esi, ecx
-		mov	eax, [scanalign]
-		mov	edx, 0fffffef8h; -(MAX_MATCH_8)
-		lea	edi, [edi + eax + 0108h] ;MAX_MATCH_8]
-		lea	esi, [esi + eax + 0108h] ;MAX_MATCH_8]
-
-;;; Test the strings for equality, 8 bytes at a time. At the end,
-;;; adjust edx so that it is offset to the exact byte that mismatched.
-;;;
-;;; We already know at this point that the first three bytes of the
-;;; strings match each other, and they can be safely passed over before
-;;; starting the compare loop. So what this code does is skip over 0-3
-;;; bytes, as much as necessary in order to dword-align the edi
-;;; pointer. (esi will still be misaligned three times out of four.)
-;;;
-;;; It should be confessed that this loop usually does not represent
-;;; much of the total running time. Replacing it with a more
-;;; straightforward "rep cmpsb" would not drastically degrade
-;;; performance.
-
-LoopCmps:
-		mov	eax, [esi + edx]
-		xor	eax, [edi + edx]
-		jnz	LeaveLoopCmps
-		mov	eax, [esi + edx + 4]
-		xor	eax, [edi + edx + 4]
-		jnz	LeaveLoopCmps4
-		add	edx, 8
-		jnz	LoopCmps
-		jmp	short LenMaximum
-LeaveLoopCmps4:	add	edx, 4
-LeaveLoopCmps:	test	eax, 0000FFFFh
-		jnz	LenLower
-		add	edx,  2
-		shr	eax, 16
-LenLower:	sub	al, 1
-		adc	edx, 0
-
-;;; Calculate the length of the match. If it is longer than MAX_MATCH,
-;;; then automatically accept it as the best possible match and leave.
-
-		lea	eax, [edi + edx]
-		mov	edi, [scan]
-		sub	eax, edi
-		cmp	eax, MAX_MATCH
-		jge	LenMaximum
-
-;;; If the length of the match is not longer than the best match we
-;;; have so far, then forget it and return to the lookup loop.
-
-		mov	edx, [deflatestate]
-		mov	ebx, [bestlen]
-		cmp	eax, ebx
-		jg	LongerMatch
-		mov	esi, [windowbestlen]
-		mov	edi, [edx + dsPrev]
-		mov	ebx, [scanend]
-		mov	edx, [chainlenwmask]
-		jmp	LookupLoop
-
-;;;         s->match_start = cur_match;
-;;;         best_len = len;
-;;;         if (len >= nice_match) break;
-;;;         scan_end = *(ushf*)(scan+best_len-1);
-
-LongerMatch:	mov	ebx, [nicematch]
-		mov	[bestlen], eax
-		mov	[edx + dsMatchStart], ecx
-		cmp	eax, ebx
-		jge	LeaveNow
-		mov	esi, [window]
-		add	esi, eax
-		mov	[windowbestlen], esi
-		movzx	ebx, word ptr [edi + eax - 1]
-		mov	edi, [edx + dsPrev]
-		mov	[scanend], ebx
-		mov	edx, [chainlenwmask]
-		jmp	LookupLoop
-
-;;; Accept the current string, with the maximum possible length.
-
-LenMaximum:	mov	edx, [deflatestate]
-		mov	dword ptr [bestlen], MAX_MATCH
-		mov	[edx + dsMatchStart], ecx
-
-;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
-;;; return s->lookahead;
-
-LeaveNow:
-		mov	edx, [deflatestate]
-		mov	ebx, [bestlen]
-		mov	eax, [edx + dsLookahead]
-		cmp	ebx, eax
-		jg	LookaheadRet
-		mov	eax, ebx
-LookaheadRet:
-
-;;; Restore the stack and return from whence we came.
-
-		add	esp, LocalVarsSize
-		pop	ebx
-		pop	esi
-		pop	edi
-		pop	ebp
-
-		ret
-; please don't remove this string !
-; Your can freely use gvmat32 in any free or commercial app if you don't remove the string in the binary!
-	db     0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998",0dh,0ah
-
-IFDEF NOUNDERLINE
-longest_match_686   endp
-ELSE
-_longest_match_686  endp
-ENDIF
-
-_TEXT   ends
-end

contrib/masmx86/gvmat32c.c

@@ -1,206 +0,0 @@
-/* gvmat32.c -- C portion of the optimized longest_match for 32 bits x86
- * Copyright (C) 1995-1996 Jean-loup Gailly and Gilles Vollant.
- * File written by Gilles Vollant, by modifiying the longest_match
- *  from Jean-loup Gailly in deflate.c
- *  it prepare all parameters and call the assembly longest_match_gvasm
- *  longest_match execute standard C code is wmask != 0x7fff
- *     (assembly code is faster with a fixed wmask)
- *
- */
-
-#include "deflate.h"
-
-#ifdef ASMV
-#define NIL 0
-
-#define UNALIGNED_OK
-
-
-/* if your C compiler don't add underline before function name,
-        define ADD_UNDERLINE_ASMFUNC */
-#ifdef ADD_UNDERLINE_ASMFUNC
-#define longest_match_7fff _longest_match_7fff
-#define longest_match_686  _longest_match_686
-#define cpudetect32        _cpudetect32
-#endif
-
-
-
-void match_init()
-{
-}
-
-unsigned long cpudetect32();
-
-uInt longest_match_c(
-    deflate_state *s,
-    IPos cur_match);                             /* current match */
-
-
-uInt longest_match_7fff(
-    deflate_state *s,
-    IPos cur_match);                             /* current match */
-
-uInt longest_match_686(
-    deflate_state *s,
-    IPos cur_match);                             /* current match */
-
-uInt longest_match(
-    deflate_state *s,
-    IPos cur_match)                             /* current match */
-{
-    static uInt iIsPPro=2;
-
-    if ((s->w_mask == 0x7fff) && (iIsPPro==0))
-        return longest_match_7fff(s,cur_match);
-
-    if (iIsPPro==1)
-        return longest_match_686(s,cur_match);
-
-    if (iIsPPro==2)
-        iIsPPro = (((cpudetect32()/0x100)&0xf)>=6) ? 1 : 0;
-
-    return longest_match_c(s,cur_match);
-}
-
-
-
-uInt longest_match_c(s, cur_match)
-    deflate_state *s;
-    IPos cur_match;                             /* current match */
-{
-    unsigned chain_length = s->max_chain_length;/* max hash chain length */
-    register Bytef *scan = s->window + s->strstart; /* current string */
-    register Bytef *match;                       /* matched string */
-    register int len;                           /* length of current match */
-    int best_len = s->prev_length;              /* best match length so far */
-    int nice_match = s->nice_match;             /* stop if match long enough */
-    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
-        s->strstart - (IPos)MAX_DIST(s) : NIL;
-    /* Stop when cur_match becomes <= limit. To simplify the code,
-     * we prevent matches with the string of window index 0.
-     */
-    Posf *prev = s->prev;
-    uInt wmask = s->w_mask;
-
-#ifdef UNALIGNED_OK
-    /* Compare two bytes at a time. Note: this is not always beneficial.
-     * Try with and without -DUNALIGNED_OK to check.
-     */
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
-    register ush scan_start = *(ushf*)scan;
-    register ush scan_end   = *(ushf*)(scan+best_len-1);
-#else
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
-    register Byte scan_end1  = scan[best_len-1];
-    register Byte scan_end   = scan[best_len];
-#endif
-
-    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
-     * It is easy to get rid of this optimization if necessary.
-     */
-    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
-    /* Do not waste too much time if we already have a good match: */
-    if (s->prev_length >= s->good_match) {
-        chain_length >>= 2;
-    }
-    /* Do not look for matches beyond the end of the input. This is necessary
-     * to make deflate deterministic.
-     */
-    if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
-
-    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
-    do {
-        Assert(cur_match < s->strstart, "no future");
-        match = s->window + cur_match;
-
-        /* Skip to next match if the match length cannot increase
-         * or if the match length is less than 2:
-         */
-#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
-        /* This code assumes sizeof(unsigned short) == 2. Do not use
-         * UNALIGNED_OK if your compiler uses a different size.
-         */
-        if (*(ushf*)(match+best_len-1) != scan_end ||
-            *(ushf*)match != scan_start) continue;
-
-        /* It is not necessary to compare scan[2] and match[2] since they are
-         * always equal when the other bytes match, given that the hash keys
-         * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
-         * strstart+3, +5, ... up to strstart+257. We check for insufficient
-         * lookahead only every 4th comparison; the 128th check will be made
-         * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
-         * necessary to put more guard bytes at the end of the window, or
-         * to check more often for insufficient lookahead.
-         */
-        Assert(scan[2] == match[2], "scan[2]?");
-        scan++, match++;
-        do {
-        } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 scan < strend);
-        /* The funny "do {}" generates better code on most compilers */
-
-        /* Here, scan <= window+strstart+257 */
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-        if (*scan == *match) scan++;
-
-        len = (MAX_MATCH - 1) - (int)(strend-scan);
-        scan = strend - (MAX_MATCH-1);
-
-#else /* UNALIGNED_OK */
-
-        if (match[best_len]   != scan_end  ||
-            match[best_len-1] != scan_end1 ||
-            *match            != *scan     ||
-            *++match          != scan[1])      continue;
-
-        /* The check at best_len-1 can be removed because it will be made
-         * again later. (This heuristic is not always a win.)
-         * It is not necessary to compare scan[2] and match[2] since they
-         * are always equal when the other bytes match, given that
-         * the hash keys are equal and that HASH_BITS >= 8.
-         */
-        scan += 2, match++;
-        Assert(*scan == *match, "match[2]?");
-
-        /* We check for insufficient lookahead only every 8th comparison;
-         * the 256th check will be made at strstart+258.
-         */
-        do {
-        } while (*++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 scan < strend);
-
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
-        len = MAX_MATCH - (int)(strend - scan);
-        scan = strend - MAX_MATCH;
-
-#endif /* UNALIGNED_OK */
-
-        if (len > best_len) {
-            s->match_start = cur_match;
-            best_len = len;
-            if (len >= nice_match) break;
-#ifdef UNALIGNED_OK
-            scan_end = *(ushf*)(scan+best_len-1);
-#else
-            scan_end1  = scan[best_len-1];
-            scan_end   = scan[best_len];
-#endif
-        }
-    } while ((cur_match = prev[cur_match & wmask]) > limit
-             && --chain_length != 0);
-
-    if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
-    return s->lookahead;
-}
-
-#endif /* ASMV */

contrib/masmx86/inffas32.asm

@@ -1,3 +1,57 @@
+;/* inffas32.asm is a hand tuned assembler version of inffast.c -- fast decoding
+; *
+; * inffas32.asm is derivated from inffas86.c, with translation of assembly code
+; *
+; * Copyright (C) 1995-2003 Mark Adler
+; * For conditions of distribution and use, see copyright notice in zlib.h
+; *
+; * Copyright (C) 2003 Chris Anderson <christop@charm.net>
+; * Please use the copyright conditions above.
+; *
+; * Mar-13-2003 -- Most of this is derived from inffast.S which is derived from
+; * the gcc -S output of zlib-1.2.0/inffast.c.  Zlib-1.2.0 is in beta release at
+; * the moment.  I have successfully compiled and tested this code with gcc2.96,
+; * gcc3.2, icc5.0, msvc6.0.  It is very close to the speed of inffast.S
+; * compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX
+; * enabled.  I will attempt to merge the MMX code into this version.  Newer
+; * versions of this and inffast.S can be found at
+; * http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/
+; *
+; * 2005 : modification by Gilles Vollant
+; */
+; For Visual C++ 4.x and higher and ML 6.x and higher
+;   ml.exe is in directory \MASM611C of Win95 DDK
+;   ml.exe is also distributed in http://www.masm32.com/masmdl.htm
+;    and in VC++2003 toolkit at http://msdn.microsoft.com/visualc/vctoolkit2003/
+;
+;
+;   compile with command line option
+;   ml  /coff /Zi /c /Flinffas32.lst inffas32.asm
+
+;   if you define NO_GZIP (see inflate.h), compile with
+;   ml  /coff /Zi /c /Flinffas32.lst /DNO_GUNZIP inffas32.asm
+
+
+; zlib122sup is 0 fort zlib 1.2.2.1 and lower
+; zlib122sup is 8 fort zlib 1.2.2.2 and more (with addition of dmax and head
+;        in inflate_state in inflate.h)
+zlib1222sup      equ    8
+
+
+IFDEF GUNZIP
+  INFLATE_MODE_TYPE    equ 11
+  INFLATE_MODE_BAD     equ 26
+ELSE
+  IFNDEF NO_GUNZIP
+    INFLATE_MODE_TYPE    equ 11
+    INFLATE_MODE_BAD     equ 26
+  ELSE
+    INFLATE_MODE_TYPE    equ 3
+    INFLATE_MODE_BAD     equ 17
+  ENDIF
+ENDIF
+
+
 ; 75 "inffast.S"
 ;FILE "inffast.S"
 
@@ -84,17 +138,16 @@ dd	2147483647
 dd	4294967295
 
 
-
 mode_state	 equ	0	;/* state->mode	*/
-wsize_state	 equ	32	;/* state->wsize */
+wsize_state	 equ	(32+zlib1222sup)	;/* state->wsize */
-write_state	 equ	(36+4)	;/* state->write */
+write_state	 equ	(36+4+zlib1222sup)	;/* state->write */
-window_state	 equ	(40+4)	;/* state->window */
+window_state	 equ	(40+4+zlib1222sup)	;/* state->window */
-hold_state	 equ	(44+4)	;/* state->hold	*/
+hold_state	 equ	(44+4+zlib1222sup)	;/* state->hold	*/
-bits_state	 equ	(48+4)	;/* state->bits	*/
+bits_state	 equ	(48+4+zlib1222sup)	;/* state->bits	*/
-lencode_state	 equ	(64+4)	;/* state->lencode */
+lencode_state	 equ	(64+4+zlib1222sup)	;/* state->lencode */
-distcode_state	 equ	(68+4)	;/* state->distcode */
+distcode_state	 equ	(68+4+zlib1222sup)	;/* state->distcode */
-lenbits_state	 equ	(72+4)	;/* state->lenbits */
+lenbits_state	 equ	(72+4+zlib1222sup)	;/* state->lenbits */
-distbits_state	 equ	(76+4)	;/* state->distbits */
+distbits_state	 equ	(76+4+zlib1222sup)	;/* state->distbits */
 
 
 ;;SECTION .text
@@ -591,9 +644,9 @@ L_init_mmx:
 	movd mm0,ebp
 	mov  ebp,ebx
 ; 896 "inffast.S"
-	movd mm4,[esp+0]
+	movd mm4,dword ptr [esp+0]
 	movq mm3,mm4
-	movd mm5,[esp+4]
+	movd mm5,dword ptr [esp+4]
 	movq mm2,mm5
 	pxor mm1,mm1
 	mov  ebx, [esp+8]
@@ -607,7 +660,7 @@ L_do_loop_mmx:
 	ja  L_get_length_code_mmx
 
 	movd mm6,ebp
-	movd mm7,[esi]
+	movd mm7,dword ptr [esi]
 	add  esi,4
 	psllq mm7,mm6
 	add  ebp,32
@@ -664,7 +717,7 @@ L_decode_distance_mmx:
 	ja L_get_dist_code_mmx
 
 	movd mm6,ebp
-	movd mm7,[esi]
+	movd mm7,dword ptr [esi]
 	add  esi,4
 	psllq mm7,mm6
 	add  ebp,32
@@ -868,7 +921,7 @@ L_invalid_distance_code:
 
 
 	mov  ecx, invalid_distance_code_msg
-	mov  edx,26
+	mov  edx,INFLATE_MODE_BAD
 	jmp  L_update_stream_state
 
 L_test_for_end_of_block:
@@ -881,7 +934,7 @@ L_test_for_end_of_block:
 	jz  L_invalid_literal_length_code
 
 	mov  ecx,0
-	mov  edx,11
+	mov  edx,INFLATE_MODE_TYPE
 	jmp  L_update_stream_state
 
 L_invalid_literal_length_code:
@@ -891,7 +944,7 @@ L_invalid_literal_length_code:
 
 
 	mov  ecx, invalid_literal_length_code_msg
-	mov  edx,26
+	mov  edx,INFLATE_MODE_BAD
 	jmp  L_update_stream_state
 
 L_invalid_distance_too_far:
@@ -900,7 +953,7 @@ L_invalid_distance_too_far:
 
 	mov  esi, [esp+44]
 	mov  ecx, invalid_distance_too_far_msg
-	mov  edx,26
+	mov  edx,INFLATE_MODE_BAD
 	jmp  L_update_stream_state
 
 L_update_stream_state:
@@ -1026,8 +1079,5 @@ L_done:
 	pop  edi
 	ret
 
-
-
-
 _TEXT	ends
 end

contrib/masmx86/match686.asm

@@ -0,0 +1,478 @@
+; match686.asm -- Asm portion of the optimized longest_match for 32 bits x86
+; Copyright (C) 1995-1996 Jean-loup Gailly, Brian Raiter and Gilles Vollant.
+; File written by Gilles Vollant, by converting match686.S from Brian Raiter
+; for MASM. This is as assembly version of longest_match
+;  from Jean-loup Gailly in deflate.c
+;
+;         http://www.zlib.net
+;         http://www.winimage.com/zLibDll
+;         http://www.muppetlabs.com/~breadbox/software/assembly.html
+;
+; For Visual C++ 4.x and higher and ML 6.x and higher
+;   ml.exe is distributed in
+;  http://www.microsoft.com/downloads/details.aspx?FamilyID=7a1c9da0-0510-44a2-b042-7ef370530c64
+;
+; this file contain two implementation of longest_match
+;
+;  this longest_match was written by Brian raiter (1998), optimized for Pentium Pro
+;   (and the faster known version of match_init on modern Core 2 Duo and AMD Phenom)
+;
+;  for using an assembly version of longest_match, you need define ASMV in project
+;
+;    compile the asm file running
+;           ml /coff /Zi /c /Flmatch686.lst match686.asm
+;    and do not include match686.obj in your project
+;
+; note: contrib of zLib 1.2.3 and earlier contained both a deprecated version for
+;  Pentium (prior Pentium Pro) and this version for Pentium Pro and modern processor
+;  with autoselect (with cpu detection code)
+;  if you want support the old pentium optimization, you can still use these version
+;
+; this file is not optimized for old pentium, but it compatible with all x86 32 bits
+; processor (starting 80386)
+;
+;
+; see below : zlib1222add must be adjuster if you use a zlib version < 1.2.2.2
+
+;uInt longest_match(s, cur_match)
+;    deflate_state *s;
+;    IPos cur_match;                             /* current match */
+
+    NbStack         equ     76
+    cur_match       equ     dword ptr[esp+NbStack-0]
+    str_s           equ     dword ptr[esp+NbStack-4]
+; 5 dword on top (ret,ebp,esi,edi,ebx)
+    adrret          equ     dword ptr[esp+NbStack-8]
+    pushebp         equ     dword ptr[esp+NbStack-12]
+    pushedi         equ     dword ptr[esp+NbStack-16]
+    pushesi         equ     dword ptr[esp+NbStack-20]
+    pushebx         equ     dword ptr[esp+NbStack-24]
+
+    chain_length    equ     dword ptr [esp+NbStack-28]
+    limit           equ     dword ptr [esp+NbStack-32]
+    best_len        equ     dword ptr [esp+NbStack-36]
+    window          equ     dword ptr [esp+NbStack-40]
+    prev            equ     dword ptr [esp+NbStack-44]
+    scan_start      equ      word ptr [esp+NbStack-48]
+    wmask           equ     dword ptr [esp+NbStack-52]
+    match_start_ptr equ     dword ptr [esp+NbStack-56]
+    nice_match      equ     dword ptr [esp+NbStack-60]
+    scan            equ     dword ptr [esp+NbStack-64]
+
+    windowlen       equ     dword ptr [esp+NbStack-68]
+    match_start     equ     dword ptr [esp+NbStack-72]
+    strend          equ     dword ptr [esp+NbStack-76]
+    NbStackAdd      equ     (NbStack-24)
+
+    .386p
+
+    name    gvmatch
+    .MODEL  FLAT
+
+
+
+;  all the +zlib1222add offsets are due to the addition of fields
+;  in zlib in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+;  (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+;  if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
+
+    zlib1222add         equ     8
+
+;  Note : these value are good with a 8 bytes boundary pack structure
+    dep_chain_length    equ     74h+zlib1222add
+    dep_window          equ     30h+zlib1222add
+    dep_strstart        equ     64h+zlib1222add
+    dep_prev_length     equ     70h+zlib1222add
+    dep_nice_match      equ     88h+zlib1222add
+    dep_w_size          equ     24h+zlib1222add
+    dep_prev            equ     38h+zlib1222add
+    dep_w_mask          equ     2ch+zlib1222add
+    dep_good_match      equ     84h+zlib1222add
+    dep_match_start     equ     68h+zlib1222add
+    dep_lookahead       equ     6ch+zlib1222add
+
+
+_TEXT                   segment
+
+IFDEF NOUNDERLINE
+            public  longest_match
+            public  match_init
+ELSE
+            public  _longest_match
+            public  _match_init
+ENDIF
+
+    MAX_MATCH           equ     258
+    MIN_MATCH           equ     3
+    MIN_LOOKAHEAD       equ     (MAX_MATCH+MIN_MATCH+1)
+
+
+
+MAX_MATCH       equ     258
+MIN_MATCH       equ     3
+MIN_LOOKAHEAD   equ     (MAX_MATCH + MIN_MATCH + 1)
+MAX_MATCH_8_     equ     ((MAX_MATCH + 7) AND 0FFF0h)
+
+
+;;; stack frame offsets
+
+chainlenwmask   equ  esp + 0    ; high word: current chain len
+                    ; low word: s->wmask
+window      equ  esp + 4    ; local copy of s->window
+windowbestlen   equ  esp + 8    ; s->window + bestlen
+scanstart   equ  esp + 16   ; first two bytes of string
+scanend     equ  esp + 12   ; last two bytes of string
+scanalign   equ  esp + 20   ; dword-misalignment of string
+nicematch   equ  esp + 24   ; a good enough match size
+bestlen     equ  esp + 28   ; size of best match so far
+scan        equ  esp + 32   ; ptr to string wanting match
+
+LocalVarsSize   equ 36
+;   saved ebx   byte esp + 36
+;   saved edi   byte esp + 40
+;   saved esi   byte esp + 44
+;   saved ebp   byte esp + 48
+;   return address  byte esp + 52
+deflatestate    equ  esp + 56   ; the function arguments
+curmatch    equ  esp + 60
+
+;;; Offsets for fields in the deflate_state structure. These numbers
+;;; are calculated from the definition of deflate_state, with the
+;;; assumption that the compiler will dword-align the fields. (Thus,
+;;; changing the definition of deflate_state could easily cause this
+;;; program to crash horribly, without so much as a warning at
+;;; compile time. Sigh.)
+
+dsWSize     equ 36+zlib1222add
+dsWMask     equ 44+zlib1222add
+dsWindow    equ 48+zlib1222add
+dsPrev      equ 56+zlib1222add
+dsMatchLen  equ 88+zlib1222add
+dsPrevMatch equ 92+zlib1222add
+dsStrStart  equ 100+zlib1222add
+dsMatchStart    equ 104+zlib1222add
+dsLookahead equ 108+zlib1222add
+dsPrevLen   equ 112+zlib1222add
+dsMaxChainLen   equ 116+zlib1222add
+dsGoodMatch equ 132+zlib1222add
+dsNiceMatch equ 136+zlib1222add
+
+
+;;; match686.asm -- Pentium-Pro-optimized version of longest_match()
+;;; Written for zlib 1.1.2
+;;; Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
+;;; You can look at http://www.muppetlabs.com/~breadbox/software/assembly.html
+;;;
+;;
+;;  This software is provided 'as-is', without any express or implied
+;;  warranty.  In no event will the authors be held liable for any damages
+;;  arising from the use of this software.
+;;
+;;  Permission is granted to anyone to use this software for any purpose,
+;;  including commercial applications, and to alter it and redistribute it
+;;  freely, subject to the following restrictions:
+;;
+;;  1. The origin of this software must not be misrepresented; you must not
+;;     claim that you wrote the original software. If you use this software
+;;     in a product, an acknowledgment in the product documentation would be
+;;     appreciated but is not required.
+;;  2. Altered source versions must be plainly marked as such, and must not be
+;;     misrepresented as being the original software
+;;  3. This notice may not be removed or altered from any source distribution.
+;;
+
+;GLOBAL _longest_match, _match_init
+
+
+;SECTION    .text
+
+;;; uInt longest_match(deflate_state *deflatestate, IPos curmatch)
+
+;_longest_match:
+    IFDEF NOUNDERLINE
+    longest_match       proc near
+    ELSE
+    _longest_match      proc near
+    ENDIF
+
+;;; Save registers that the compiler may be using, and adjust esp to
+;;; make room for our stack frame.
+
+        push    ebp
+        push    edi
+        push    esi
+        push    ebx
+        sub esp, LocalVarsSize
+
+;;; Retrieve the function arguments. ecx will hold cur_match
+;;; throughout the entire function. edx will hold the pointer to the
+;;; deflate_state structure during the function's setup (before
+;;; entering the main loop.
+
+        mov edx, [deflatestate]
+        mov ecx, [curmatch]
+
+;;; uInt wmask = s->w_mask;
+;;; unsigned chain_length = s->max_chain_length;
+;;; if (s->prev_length >= s->good_match) {
+;;;     chain_length >>= 2;
+;;; }
+
+        mov eax, [edx + dsPrevLen]
+        mov ebx, [edx + dsGoodMatch]
+        cmp eax, ebx
+        mov eax, [edx + dsWMask]
+        mov ebx, [edx + dsMaxChainLen]
+        jl  LastMatchGood
+        shr ebx, 2
+LastMatchGood:
+
+;;; chainlen is decremented once beforehand so that the function can
+;;; use the sign flag instead of the zero flag for the exit test.
+;;; It is then shifted into the high word, to make room for the wmask
+;;; value, which it will always accompany.
+
+        dec ebx
+        shl ebx, 16
+        or  ebx, eax
+        mov [chainlenwmask], ebx
+
+;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+        mov eax, [edx + dsNiceMatch]
+        mov ebx, [edx + dsLookahead]
+        cmp ebx, eax
+        jl  LookaheadLess
+        mov ebx, eax
+LookaheadLess:  mov [nicematch], ebx
+
+;;; register Bytef *scan = s->window + s->strstart;
+
+        mov esi, [edx + dsWindow]
+        mov [window], esi
+        mov ebp, [edx + dsStrStart]
+        lea edi, [esi + ebp]
+        mov [scan], edi
+
+;;; Determine how many bytes the scan ptr is off from being
+;;; dword-aligned.
+
+        mov eax, edi
+        neg eax
+        and eax, 3
+        mov [scanalign], eax
+
+;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+;;;     s->strstart - (IPos)MAX_DIST(s) : NIL;
+
+        mov eax, [edx + dsWSize]
+        sub eax, MIN_LOOKAHEAD
+        sub ebp, eax
+        jg  LimitPositive
+        xor ebp, ebp
+LimitPositive:
+
+;;; int best_len = s->prev_length;
+
+        mov eax, [edx + dsPrevLen]
+        mov [bestlen], eax
+
+;;; Store the sum of s->window + best_len in esi locally, and in esi.
+
+        add esi, eax
+        mov [windowbestlen], esi
+
+;;; register ush scan_start = *(ushf*)scan;
+;;; register ush scan_end   = *(ushf*)(scan+best_len-1);
+;;; Posf *prev = s->prev;
+
+        movzx   ebx, word ptr [edi]
+        mov [scanstart], ebx
+        movzx   ebx, word ptr [edi + eax - 1]
+        mov [scanend], ebx
+        mov edi, [edx + dsPrev]
+
+;;; Jump into the main loop.
+
+        mov edx, [chainlenwmask]
+        jmp short LoopEntry
+
+align 4
+
+;;; do {
+;;;     match = s->window + cur_match;
+;;;     if (*(ushf*)(match+best_len-1) != scan_end ||
+;;;         *(ushf*)match != scan_start) continue;
+;;;     [...]
+;;; } while ((cur_match = prev[cur_match & wmask]) > limit
+;;;          && --chain_length != 0);
+;;;
+;;; Here is the inner loop of the function. The function will spend the
+;;; majority of its time in this loop, and majority of that time will
+;;; be spent in the first ten instructions.
+;;;
+;;; Within this loop:
+;;; ebx = scanend
+;;; ecx = curmatch
+;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
+;;; esi = windowbestlen - i.e., (window + bestlen)
+;;; edi = prev
+;;; ebp = limit
+
+LookupLoop:
+        and ecx, edx
+        movzx   ecx, word ptr [edi + ecx*2]
+        cmp ecx, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+LoopEntry:  movzx   eax, word ptr [esi + ecx - 1]
+        cmp eax, ebx
+        jnz LookupLoop
+        mov eax, [window]
+        movzx   eax, word ptr [eax + ecx]
+        cmp eax, [scanstart]
+        jnz LookupLoop
+
+;;; Store the current value of chainlen.
+
+        mov [chainlenwmask], edx
+
+;;; Point edi to the string under scrutiny, and esi to the string we
+;;; are hoping to match it up with. In actuality, esi and edi are
+;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is
+;;; initialized to -(MAX_MATCH_8 - scanalign).
+
+        mov esi, [window]
+        mov edi, [scan]
+        add esi, ecx
+        mov eax, [scanalign]
+        mov edx, 0fffffef8h; -(MAX_MATCH_8)
+        lea edi, [edi + eax + 0108h] ;MAX_MATCH_8]
+        lea esi, [esi + eax + 0108h] ;MAX_MATCH_8]
+
+;;; Test the strings for equality, 8 bytes at a time. At the end,
+;;; adjust edx so that it is offset to the exact byte that mismatched.
+;;;
+;;; We already know at this point that the first three bytes of the
+;;; strings match each other, and they can be safely passed over before
+;;; starting the compare loop. So what this code does is skip over 0-3
+;;; bytes, as much as necessary in order to dword-align the edi
+;;; pointer. (esi will still be misaligned three times out of four.)
+;;;
+;;; It should be confessed that this loop usually does not represent
+;;; much of the total running time. Replacing it with a more
+;;; straightforward "rep cmpsb" would not drastically degrade
+;;; performance.
+
+LoopCmps:
+        mov eax, [esi + edx]
+        xor eax, [edi + edx]
+        jnz LeaveLoopCmps
+        mov eax, [esi + edx + 4]
+        xor eax, [edi + edx + 4]
+        jnz LeaveLoopCmps4
+        add edx, 8
+        jnz LoopCmps
+        jmp short LenMaximum
+LeaveLoopCmps4: add edx, 4
+LeaveLoopCmps:  test    eax, 0000FFFFh
+        jnz LenLower
+        add edx,  2
+        shr eax, 16
+LenLower:   sub al, 1
+        adc edx, 0
+
+;;; Calculate the length of the match. If it is longer than MAX_MATCH,
+;;; then automatically accept it as the best possible match and leave.
+
+        lea eax, [edi + edx]
+        mov edi, [scan]
+        sub eax, edi
+        cmp eax, MAX_MATCH
+        jge LenMaximum
+
+;;; If the length of the match is not longer than the best match we
+;;; have so far, then forget it and return to the lookup loop.
+
+        mov edx, [deflatestate]
+        mov ebx, [bestlen]
+        cmp eax, ebx
+        jg  LongerMatch
+        mov esi, [windowbestlen]
+        mov edi, [edx + dsPrev]
+        mov ebx, [scanend]
+        mov edx, [chainlenwmask]
+        jmp LookupLoop
+
+;;;         s->match_start = cur_match;
+;;;         best_len = len;
+;;;         if (len >= nice_match) break;
+;;;         scan_end = *(ushf*)(scan+best_len-1);
+
+LongerMatch:    mov ebx, [nicematch]
+        mov [bestlen], eax
+        mov [edx + dsMatchStart], ecx
+        cmp eax, ebx
+        jge LeaveNow
+        mov esi, [window]
+        add esi, eax
+        mov [windowbestlen], esi
+        movzx   ebx, word ptr [edi + eax - 1]
+        mov edi, [edx + dsPrev]
+        mov [scanend], ebx
+        mov edx, [chainlenwmask]
+        jmp LookupLoop
+
+;;; Accept the current string, with the maximum possible length.
+
+LenMaximum: mov edx, [deflatestate]
+        mov dword ptr [bestlen], MAX_MATCH
+        mov [edx + dsMatchStart], ecx
+
+;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+;;; return s->lookahead;
+
+LeaveNow:
+        mov edx, [deflatestate]
+        mov ebx, [bestlen]
+        mov eax, [edx + dsLookahead]
+        cmp ebx, eax
+        jg  LookaheadRet
+        mov eax, ebx
+LookaheadRet:
+
+;;; Restore the stack and return from whence we came.
+
+        add esp, LocalVarsSize
+        pop ebx
+        pop esi
+        pop edi
+        pop ebp
+
+        ret
+; please don't remove this string !
+; Your can freely use match686 in any free or commercial app if you don't remove the string in the binary!
+    db     0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998",0dh,0ah
+
+
+    IFDEF NOUNDERLINE
+    longest_match       endp
+    ELSE
+    _longest_match      endp
+    ENDIF
+
+    IFDEF NOUNDERLINE
+    match_init      proc near
+                    ret
+    match_init      endp
+    ELSE
+    _match_init     proc near
+                    ret
+    _match_init     endp
+    ENDIF
+
+
+_TEXT   ends
+end

contrib/masmx86/mkasm.bat

@@ -1,3 +0,0 @@
-cl /I..\.. /O2 /c gvmat32c.c
-ml /coff /Zi /c /Flgvmat32.lst gvmat32.asm
-ml /coff /Zi /c /Flinffas32.lst inffas32.asm

contrib/masmx86/readme.txt

@@ -7,15 +7,21 @@ longest_match() and inflate_fast().
 
 Use instructions
 ----------------
-Copy these files into the zlib source directory, then run the
+Assemble using MASM, and copy the object files into the zlib source
-appropriate makefile, as suggested below.
+directory, then run the appropriate makefile, as suggested below.  You can
+donwload MASM from here:
 
+    http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=7a1c9da0-0510-44a2-b042-7ef370530c64
+
+You can also get objects files here:
+
+    http://www.winimage.com/zLibDll/zlib124_masm_obj.zip
 
 Build instructions
 ------------------
 * With Microsoft C and MASM:
-nmake -f win32/Makefile.msc LOC="-DASMV -DASMINF" OBJA="gvmat32c.obj gvmat32.obj inffas32.obj"
+nmake -f win32/Makefile.msc LOC="-DASMV -DASMINF" OBJA="match686.obj inffas32.obj"
 
 * With Borland C and TASM:
-make -f win32/Makefile.bor LOCAL_ZLIB="-DASMV -DASMINF" OBJA="gvmat32c.obj gvmat32.obj inffas32.obj" OBJPA="+gvmat32c.obj+gvmat32.obj+inffas32.obj"
+make -f win32/Makefile.bor LOCAL_ZLIB="-DASMV -DASMINF" OBJA="match686.obj inffas32.obj" OBJPA="+match686c.obj+match686.obj+inffas32.obj"
 

contrib/minizip/ChangeLogUnzip

@@ -1,55 +0,0 @@
-Change in 1.00: (10 sept 03)
-- rename to 1.00
-- cosmetic code change
-
-Change in 0.22: (19 May 03)
-- crypting support (unless you define NOCRYPT)
-- append file in existing zipfile
-
-Change in 0.21: (10 Mar 03)
-- bug fixes
-
-Change in 0.17: (27 Jan 02)
-- bug fixes
-
-Change in 0.16: (19 Jan 02)
-- Support of ioapi for virtualize zip file access
-
-Change in 0.15: (19 Mar 98)
-- fix memory leak in minizip.c
-
-Change in 0.14: (10 Mar 98)
-- fix bugs in minizip.c sample for zipping big file
-- fix problem in month in date handling
-- fix bug in unzlocal_GetCurrentFileInfoInternal in unzip.c for
-    comment handling
-
-Change in 0.13: (6 Mar 98)
-- fix bugs in zip.c
-- add real minizip sample
-
-Change in 0.12: (4 Mar 98)
-- add zip.c and zip.h for creates .zip file
-- fix change_file_date in miniunz.c for Unix (Jean-loup Gailly)
-- fix miniunz.c for file without specific record for directory
-
-Change in 0.11: (3 Mar 98)
-- fix bug in unzGetCurrentFileInfo for get extra field and comment
-- enhance miniunz sample, remove the bad unztst.c sample
-
-Change in 0.10: (2 Mar 98)
-- fix bug in unzReadCurrentFile
-- rename unzip* to unz* function and structure
-- remove Windows-like hungary notation variable name
-- modify some structure in unzip.h
-- add somes comment in source
-- remove unzipGetcCurrentFile function
-- replace ZUNZEXPORT by ZEXPORT
-- add unzGetLocalExtrafield for get the local extrafield info
-- add a new sample, miniunz.c
-
-Change in 0.4: (25 Feb 98)
-- suppress the type unzipFileInZip.
-  Only on file in the zipfile can be open at the same time
-- fix somes typo in code
-- added tm_unz structure in unzip_file_info (date/time in readable format)

contrib/minizip/MiniZip64_Changes.txt

@@ -0,0 +1,6 @@
+
+MiniZip 1.1 was derrived from MiniZip at version 1.01f
+
+Change in 1.0 (Okt 2009)
+ - **TODO - Add history**
+

contrib/minizip/MiniZip64_info.txt

@@ -0,0 +1,74 @@
+MiniZip - Copyright (c) 1998-2010 - by Gilles Vollant - version 1.1 64 bits from Mathias Svensson
+
+Introduction
+---------------------
+MiniZip 1.1 is built from MiniZip 1.0 by Gilles Vollant ( http://www.winimage.com/zLibDll/minizip.html )
+
+When adding ZIP64 support into minizip it would result into risk of breaking compatibility with minizip 1.0.
+All possible work was done for compatibility.
+
+
+Background
+---------------------
+When adding ZIP64 support Mathias Svensson found that Even Rouault have added ZIP64 
+support for unzip.c into minizip for a open source project called gdal ( http://www.gdal.org/ )
+
+That was used as a starting point. And after that ZIP64 support was added to zip.c
+some refactoring and code cleanup was also done.
+
+
+Changed from MiniZip 1.0 to MiniZip 1.1
+---------------------------------------
+* Added ZIP64 support for unzip ( by Even Rouault )
+* Added ZIP64 support for zip ( by Mathias Svensson )
+* Reverted some changed that Even Rouault did.
+* Bunch of patches received from Gulles Vollant that he received for MiniZip from various users.
+* Added unzip patch for BZIP Compression method (patch create by Daniel Borca)
+* Added BZIP Compress method for zip
+* Did some refactoring and code cleanup
+
+
+Credits
+
+ Gilles Vollant    - Original MiniZip author
+ Even Rouault      - ZIP64 unzip Support
+ Daniel Borca      - BZip Compression method support in unzip
+ Mathias Svensson  - ZIP64 zip support
+ Mathias Svensson  - BZip Compression method support in zip
+
+ Resources
+
+ ZipLayout   http://result42.com/projects/ZipFileLayout
+             Command line tool for Windows that shows the layout and information of the headers in a zip archive.
+             Used when debugging and validating the creation of zip files using MiniZip64
+
+
+ ZIP App Note  http://www.pkware.com/documents/casestudies/APPNOTE.TXT
+               Zip File specification
+
+
+Notes.
+ * To be able to use BZip compression method in zip64.c or unzip64.c the BZIP2 lib is needed and HAVE_BZIP2 need to be defined.
+
+License
+----------------------------------------------------------
+   Condition of use and distribution are the same than zlib :
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+----------------------------------------------------------
+

contrib/minizip/crypt.h

@@ -1,9 +1,9 @@
 /* crypt.h -- base code for crypt/uncrypt ZIPfile
 
 
-   Version 1.00, September 10th, 2003
+   Version 1.01e, February 12th, 2005
 
-   Copyright (C) 1998-2003 Gilles Vollant
+   Copyright (C) 1998-2005 Gilles Vollant
 
    This code is a modified version of crypting code in Infozip distribution
 
@@ -87,13 +87,12 @@ static void init_keys(const char* passwd,unsigned long* pkeys,const unsigned lon
 #    define ZCR_SEED2 3141592654UL     /* use PI as default pattern */
 #  endif
 
-static int crypthead(passwd, buf, bufSize, pkeys, pcrc_32_tab, crcForCrypting)
+static int crypthead(const char* passwd,      /* password string */
-    const char *passwd;         /* password string */
+                     unsigned char* buf,      /* where to write header */
-    unsigned char *buf;         /* where to write header */
+                     int bufSize,
-    int bufSize;
+                     unsigned long* pkeys,
-    unsigned long* pkeys;
+                     const unsigned long* pcrc_32_tab,
-    const unsigned long* pcrc_32_tab;
+                     unsigned long crcForCrypting)
-    unsigned long crcForCrypting;
 {
     int n;                       /* index in random header */
     int t;                       /* temporary */
@@ -124,8 +123,8 @@ static int crypthead(passwd, buf, bufSize, pkeys, pcrc_32_tab, crcForCrypting)
     {
         buf[n] = (unsigned char)zencode(pkeys, pcrc_32_tab, header[n], t);
     }
-    buf[n++] = zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 16) & 0xff, t);
+    buf[n++] = (unsigned char)zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 16) & 0xff, t);
-    buf[n++] = zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 24) & 0xff, t);
+    buf[n++] = (unsigned char)zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 24) & 0xff, t);
     return n;
 }
 

contrib/minizip/ioapi.c

@@ -1,74 +1,86 @@
-/* ioapi.c -- IO base function header for compress/uncompress .zip
+/* ioapi.h -- IO base function header for compress/uncompress .zip
-   files using zlib + zip or unzip API
+   part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
 
-   Version 1.00, September 10th, 2003
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+         Modifications for Zip64 support
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+
+         For more info read MiniZip_info.txt
 
-   Copyright (C) 1998-2003 Gilles Vollant
 */
 
-#include <stdio.h>
+#if (defined(_WIN32))
-#include <stdlib.h>
+        #define _CRT_SECURE_NO_WARNINGS
-#include <string.h>
+#endif
 
-#include "zlib.h"
 #include "ioapi.h"
 
+voidpf call_zopen64 (const zlib_filefunc64_32_def* pfilefunc,const void*filename,int mode)
+{
+    if (pfilefunc->zfile_func64.zopen64_file != NULL)
+        return (*(pfilefunc->zfile_func64.zopen64_file)) (pfilefunc->zfile_func64.opaque,filename,mode);
+    else
+    {
+        return (*(pfilefunc->zopen32_file))(pfilefunc->zfile_func64.opaque,(const char*)filename,mode);
+    }
+}
+
+long call_zseek64 (const zlib_filefunc64_32_def* pfilefunc,voidpf filestream, ZPOS64_T offset, int origin)
+{
+    if (pfilefunc->zfile_func64.zseek64_file != NULL)
+        return (*(pfilefunc->zfile_func64.zseek64_file)) (pfilefunc->zfile_func64.opaque,filestream,offset,origin);
+    else
+    {
+        uLong offsetTruncated = (uLong)offset;
+        if (offsetTruncated != offset)
+            return -1;
+        else
+            return (*(pfilefunc->zseek32_file))(pfilefunc->zfile_func64.opaque,filestream,offsetTruncated,origin);
+    }
+}
+
+ZPOS64_T call_ztell64 (const zlib_filefunc64_32_def* pfilefunc,voidpf filestream)
+{
+    if (pfilefunc->zfile_func64.zseek64_file != NULL)
+        return (*(pfilefunc->zfile_func64.ztell64_file)) (pfilefunc->zfile_func64.opaque,filestream);
+    else
+    {
+        uLong tell_uLong = (*(pfilefunc->ztell32_file))(pfilefunc->zfile_func64.opaque,filestream);
+        if ((tell_uLong) == ((uLong)-1))
+            return (ZPOS64_T)-1;
+        else
+            return tell_uLong;
+    }
+}
+
+void fill_zlib_filefunc64_32_def_from_filefunc32(zlib_filefunc64_32_def* p_filefunc64_32,const zlib_filefunc_def* p_filefunc32)
+{
+    p_filefunc64_32->zfile_func64.zopen64_file = NULL;
+    p_filefunc64_32->zopen32_file = p_filefunc32->zopen_file;
+    p_filefunc64_32->zfile_func64.zerror_file = p_filefunc32->zerror_file;
+    p_filefunc64_32->zfile_func64.zread_file = p_filefunc32->zread_file;
+    p_filefunc64_32->zfile_func64.zwrite_file = p_filefunc32->zwrite_file;
+    p_filefunc64_32->zfile_func64.ztell64_file = NULL;
+    p_filefunc64_32->zfile_func64.zseek64_file = NULL;
+    p_filefunc64_32->zfile_func64.zclose_file = p_filefunc32->zclose_file;
+    p_filefunc64_32->zfile_func64.zerror_file = p_filefunc32->zerror_file;
+    p_filefunc64_32->zfile_func64.opaque = p_filefunc32->opaque;
+    p_filefunc64_32->zseek32_file = p_filefunc32->zseek_file;
+    p_filefunc64_32->ztell32_file = p_filefunc32->ztell_file;
+}
 
 
-/* I've found an old Unix (a SunOS 4.1.3_U1) without all SEEK_* defined.... */
 
-#ifndef SEEK_CUR
+static voidpf  ZCALLBACK fopen_file_func OF((voidpf opaque, const char* filename, int mode));
-#define SEEK_CUR    1
+static uLong   ZCALLBACK fread_file_func OF((voidpf opaque, voidpf stream, void* buf, uLong size));
-#endif
+static uLong   ZCALLBACK fwrite_file_func OF((voidpf opaque, voidpf stream, const void* buf,uLong size));
+static ZPOS64_T ZCALLBACK ftell64_file_func OF((voidpf opaque, voidpf stream));
+static long    ZCALLBACK fseek64_file_func OF((voidpf opaque, voidpf stream, ZPOS64_T offset, int origin));
+static int     ZCALLBACK fclose_file_func OF((voidpf opaque, voidpf stream));
+static int     ZCALLBACK ferror_file_func OF((voidpf opaque, voidpf stream));
 
-#ifndef SEEK_END
+static voidpf ZCALLBACK fopen_file_func (voidpf opaque, const char* filename, int mode)
-#define SEEK_END    2
-#endif
-
-#ifndef SEEK_SET
-#define SEEK_SET    0
-#endif
-
-voidpf ZCALLBACK fopen_file_func OF((
-   voidpf opaque,
-   const char* filename,
-   int mode));
-
-uLong ZCALLBACK fread_file_func OF((
-   voidpf opaque,
-   voidpf stream,
-   void* buf,
-   uLong size));
-
-uLong ZCALLBACK fwrite_file_func OF((
-   voidpf opaque,
-   voidpf stream,
-   const void* buf,
-   uLong size));
-
-long ZCALLBACK ftell_file_func OF((
-   voidpf opaque,
-   voidpf stream));
-
-long ZCALLBACK fseek_file_func OF((
-   voidpf opaque,
-   voidpf stream,
-   uLong offset,
-   int origin));
-
-int ZCALLBACK fclose_file_func OF((
-   voidpf opaque,
-   voidpf stream));
-
-int ZCALLBACK ferror_file_func OF((
-   voidpf opaque,
-   voidpf stream));
-
-
-voidpf ZCALLBACK fopen_file_func (opaque, filename, mode)
-   voidpf opaque;
-   const char* filename;
-   int mode;
 {
     FILE* file = NULL;
     const char* mode_fopen = NULL;
@@ -86,44 +98,55 @@ voidpf ZCALLBACK fopen_file_func (opaque, filename, mode)
     return file;
 }
 
-
+static voidpf ZCALLBACK fopen64_file_func (voidpf opaque, const void* filename, int mode)
-uLong ZCALLBACK fread_file_func (opaque, stream, buf, size)
-   voidpf opaque;
-   voidpf stream;
-   void* buf;
-   uLong size;
 {
-    uLong ret;
+    FILE* file = NULL;
-    ret = fread(buf, 1, (size_t)size, (FILE *)stream);
+    const char* mode_fopen = NULL;
-    return ret;
+    if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ)
+        mode_fopen = "rb";
+    else
+    if (mode & ZLIB_FILEFUNC_MODE_EXISTING)
+        mode_fopen = "r+b";
+    else
+    if (mode & ZLIB_FILEFUNC_MODE_CREATE)
+        mode_fopen = "wb";
+
+    if ((filename!=NULL) && (mode_fopen != NULL))
+        file = fopen64((const char*)filename, mode_fopen);
+    return file;
 }
 
 
-uLong ZCALLBACK fwrite_file_func (opaque, stream, buf, size)
+static uLong ZCALLBACK fread_file_func (voidpf opaque, voidpf stream, void* buf, uLong size)
-   voidpf opaque;
-   voidpf stream;
-   const void* buf;
-   uLong size;
 {
     uLong ret;
-    ret = fwrite(buf, 1, (size_t)size, (FILE *)stream);
+    ret = (uLong)fread(buf, 1, (size_t)size, (FILE *)stream);
     return ret;
 }
 
-long ZCALLBACK ftell_file_func (opaque, stream)
+static uLong ZCALLBACK fwrite_file_func (voidpf opaque, voidpf stream, const void* buf, uLong size)
-   voidpf opaque;
+{
-   voidpf stream;
+    uLong ret;
+    ret = (uLong)fwrite(buf, 1, (size_t)size, (FILE *)stream);
+    return ret;
+}
+
+static long ZCALLBACK ftell_file_func (voidpf opaque, voidpf stream)
 {
     long ret;
     ret = ftell((FILE *)stream);
     return ret;
 }
 
-long ZCALLBACK fseek_file_func (opaque, stream, offset, origin)
+
-   voidpf opaque;
+static ZPOS64_T ZCALLBACK ftell64_file_func (voidpf opaque, voidpf stream)
-   voidpf stream;
+{
-   uLong offset;
+    ZPOS64_T ret;
-   int origin;
+    ret = ftello64((FILE *)stream);
+    return ret;
+}
+
+static long ZCALLBACK fseek_file_func (voidpf  opaque, voidpf stream, uLong offset, int origin)
 {
     int fseek_origin=0;
     long ret;
@@ -141,22 +164,45 @@ long ZCALLBACK fseek_file_func (opaque, stream, offset, origin)
     default: return -1;
     }
     ret = 0;
-    fseek((FILE *)stream, offset, fseek_origin);
+    if (fseek((FILE *)stream, offset, fseek_origin) != 0)
+        ret = -1;
     return ret;
 }
 
-int ZCALLBACK fclose_file_func (opaque, stream)
+static long ZCALLBACK fseek64_file_func (voidpf  opaque, voidpf stream, ZPOS64_T offset, int origin)
-   voidpf opaque;
+{
-   voidpf stream;
+    int fseek_origin=0;
+    long ret;
+    switch (origin)
+    {
+    case ZLIB_FILEFUNC_SEEK_CUR :
+        fseek_origin = SEEK_CUR;
+        break;
+    case ZLIB_FILEFUNC_SEEK_END :
+        fseek_origin = SEEK_END;
+        break;
+    case ZLIB_FILEFUNC_SEEK_SET :
+        fseek_origin = SEEK_SET;
+        break;
+    default: return -1;
+    }
+    ret = 0;
+
+    if(fseeko64((FILE *)stream, offset, fseek_origin) != 0)
+                        ret = -1;
+
+    return ret;
+}
+
+
+static int ZCALLBACK fclose_file_func (voidpf opaque, voidpf stream)
 {
     int ret;
     ret = fclose((FILE *)stream);
     return ret;
 }
 
-int ZCALLBACK ferror_file_func (opaque, stream)
+static int ZCALLBACK ferror_file_func (voidpf opaque, voidpf stream)
-   voidpf opaque;
-   voidpf stream;
 {
     int ret;
     ret = ferror((FILE *)stream);
@@ -175,3 +221,15 @@ void fill_fopen_filefunc (pzlib_filefunc_def)
     pzlib_filefunc_def->zerror_file = ferror_file_func;
     pzlib_filefunc_def->opaque = NULL;
 }
+
+void fill_fopen64_filefunc (zlib_filefunc64_def*  pzlib_filefunc_def)
+{
+    pzlib_filefunc_def->zopen64_file = fopen64_file_func;
+    pzlib_filefunc_def->zread_file = fread_file_func;
+    pzlib_filefunc_def->zwrite_file = fwrite_file_func;
+    pzlib_filefunc_def->ztell64_file = ftell64_file_func;
+    pzlib_filefunc_def->zseek64_file = fseek64_file_func;
+    pzlib_filefunc_def->zclose_file = fclose_file_func;
+    pzlib_filefunc_def->zerror_file = ferror_file_func;
+    pzlib_filefunc_def->opaque = NULL;
+}

contrib/minizip/ioapi.h

@@ -1,13 +1,104 @@
 /* ioapi.h -- IO base function header for compress/uncompress .zip
-   files using zlib + zip or unzip API
+   part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
 
-   Version 1.00, September 10th, 2003
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+         Modifications for Zip64 support
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+
+         For more info read MiniZip_info.txt
+
+         Changes
+
+    Oct-2009 - Defined ZPOS64_T to fpos_t on windows and u_int64_t on linux. (might need to find a better why for this)
+    Oct-2009 - Change to fseeko64, ftello64 and fopen64 so large files would work on linux.
+               More if/def section may be needed to support other platforms
+    Oct-2009 - Defined fxxxx64 calls to normal fopen/ftell/fseek so they would compile on windows.
+                          (but you should use iowin32.c for windows instead)
 
-   Copyright (C) 1998-2003 Gilles Vollant
 */
 
-#ifndef _ZLIBIOAPI_H
+#ifndef _ZLIBIOAPI64_H
-#define _ZLIBIOAPI_H
+#define _ZLIBIOAPI64_H
+
+#if (!defined(_WIN32)) && (!defined(WIN32))
+
+  // Linux needs this to support file operation on files larger then 4+GB
+  // But might need better if/def to select just the platforms that needs them.
+
+        #ifndef __USE_FILE_OFFSET64
+                #define __USE_FILE_OFFSET64
+        #endif
+        #ifndef __USE_LARGEFILE64
+                #define __USE_LARGEFILE64
+        #endif
+        #ifndef _LARGEFILE64_SOURCE
+                #define _LARGEFILE64_SOURCE
+        #endif
+        #ifndef _FILE_OFFSET_BIT
+                #define _FILE_OFFSET_BIT 64
+        #endif
+#endif
+
+#include <stdio.h>
+#include <stdlib.h>
+#include "zlib.h"
+
+#if defined(USE_FILE32API)
+#define fopen64 fopen
+#define ftello64 ftell
+#define fseeko64 fseek
+#else
+#ifdef _MSC_VER
+ #define fopen64 fopen
+ #if (_MSC_VER >= 1400) && (!(defined(NO_MSCVER_FILE64_FUNC)))
+  #define ftello64 _ftelli64
+  #define fseeko64 _fseeki64
+ #else // old MSC
+  #define ftello64 ftell
+  #define fseeko64 fseek
+ #endif
+#endif
+#endif
+
+/*
+#ifndef ZPOS64_T
+  #ifdef _WIN32
+                #define ZPOS64_T fpos_t
+  #else
+    #include <stdint.h>
+    #define ZPOS64_T uint64_t
+  #endif
+#endif
+*/
+
+#ifdef HAVE_MINIZIP64_CONF_H
+#include "mz64conf.h"
+#endif
+
+/* a type choosen by DEFINE */
+#ifdef HAVE_64BIT_INT_CUSTOM
+typedef  64BIT_INT_CUSTOM_TYPE ZPOS64_T;
+#else
+#ifdef HAS_STDINT_H
+#include "stdint.h"
+typedef uint64_t ZPOS64_T;
+#else
+
+
+#if defined(_MSC_VER) || defined(__BORLANDC__)
+typedef unsigned __int64 ZPOS64_T;
+#else
+typedef unsigned long long int ZPOS64_T;
+#endif
+#endif
+#endif
+
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
 
 
 #define ZLIB_FILEFUNC_SEEK_CUR (1)
@@ -23,26 +114,27 @@
 
 
 #ifndef ZCALLBACK
-
+ #if (defined(WIN32) || defined(_WIN32) || defined (WINDOWS) || defined (_WINDOWS)) && defined(CALLBACK) && defined (USEWINDOWS_CALLBACK)
-#if (defined(WIN32) || defined (WINDOWS) || defined (_WINDOWS)) && defined(CALLBACK) && defined (USEWINDOWS_CALLBACK)
+   #define ZCALLBACK CALLBACK
-#define ZCALLBACK CALLBACK
+ #else
-#else
+   #define ZCALLBACK
-#define ZCALLBACK
+ #endif
-#endif
 #endif
 
-#ifdef __cplusplus
-extern "C" {
-#endif
 
-typedef voidpf (ZCALLBACK *open_file_func) OF((voidpf opaque, const char* filename, int mode));
-typedef uLong  (ZCALLBACK *read_file_func) OF((voidpf opaque, voidpf stream, void* buf, uLong size));
-typedef uLong  (ZCALLBACK *write_file_func) OF((voidpf opaque, voidpf stream, const void* buf, uLong size));
-typedef long   (ZCALLBACK *tell_file_func) OF((voidpf opaque, voidpf stream));
-typedef long   (ZCALLBACK *seek_file_func) OF((voidpf opaque, voidpf stream, uLong offset, int origin));
-typedef int    (ZCALLBACK *close_file_func) OF((voidpf opaque, voidpf stream));
-typedef int    (ZCALLBACK *testerror_file_func) OF((voidpf opaque, voidpf stream));
 
+
+typedef voidpf   (ZCALLBACK *open_file_func)      OF((voidpf opaque, const char* filename, int mode));
+typedef uLong    (ZCALLBACK *read_file_func)      OF((voidpf opaque, voidpf stream, void* buf, uLong size));
+typedef uLong    (ZCALLBACK *write_file_func)     OF((voidpf opaque, voidpf stream, const void* buf, uLong size));
+typedef int      (ZCALLBACK *close_file_func)     OF((voidpf opaque, voidpf stream));
+typedef int      (ZCALLBACK *testerror_file_func) OF((voidpf opaque, voidpf stream));
+
+typedef long     (ZCALLBACK *tell_file_func)      OF((voidpf opaque, voidpf stream));
+typedef long     (ZCALLBACK *seek_file_func)      OF((voidpf opaque, voidpf stream, uLong offset, int origin));
+
+
+/* here is the "old" 32 bits structure structure */
 typedef struct zlib_filefunc_def_s
 {
     open_file_func      zopen_file;
@@ -55,21 +147,54 @@ typedef struct zlib_filefunc_def_s
     voidpf              opaque;
 } zlib_filefunc_def;
 
+typedef ZPOS64_T (ZCALLBACK *tell64_file_func)    OF((voidpf opaque, voidpf stream));
+typedef long     (ZCALLBACK *seek64_file_func)    OF((voidpf opaque, voidpf stream, ZPOS64_T offset, int origin));
+typedef voidpf   (ZCALLBACK *open64_file_func)    OF((voidpf opaque, const void* filename, int mode));
 
+typedef struct zlib_filefunc64_def_s
+{
+    open64_file_func    zopen64_file;
+    read_file_func      zread_file;
+    write_file_func     zwrite_file;
+    tell64_file_func    ztell64_file;
+    seek64_file_func    zseek64_file;
+    close_file_func     zclose_file;
+    testerror_file_func zerror_file;
+    voidpf              opaque;
+} zlib_filefunc64_def;
 
+void fill_fopen64_filefunc OF((zlib_filefunc64_def* pzlib_filefunc_def));
 void fill_fopen_filefunc OF((zlib_filefunc_def* pzlib_filefunc_def));
 
-#define ZREAD(filefunc,filestream,buf,size) ((*((filefunc).zread_file))((filefunc).opaque,filestream,buf,size))
+/* now internal definition, only for zip.c and unzip.h */
-#define ZWRITE(filefunc,filestream,buf,size) ((*((filefunc).zwrite_file))((filefunc).opaque,filestream,buf,size))
+typedef struct zlib_filefunc64_32_def_s
-#define ZTELL(filefunc,filestream) ((*((filefunc).ztell_file))((filefunc).opaque,filestream))
+{
-#define ZSEEK(filefunc,filestream,pos,mode) ((*((filefunc).zseek_file))((filefunc).opaque,filestream,pos,mode))
+    zlib_filefunc64_def zfile_func64;
-#define ZCLOSE(filefunc,filestream) ((*((filefunc).zclose_file))((filefunc).opaque,filestream))
+    open_file_func      zopen32_file;
-#define ZERROR(filefunc,filestream) ((*((filefunc).zerror_file))((filefunc).opaque,filestream))
+    tell_file_func      ztell32_file;
+    seek_file_func      zseek32_file;
+} zlib_filefunc64_32_def;
 
 
+#define ZREAD64(filefunc,filestream,buf,size)     ((*((filefunc).zfile_func64.zread_file))   ((filefunc).zfile_func64.opaque,filestream,buf,size))
+#define ZWRITE64(filefunc,filestream,buf,size)    ((*((filefunc).zfile_func64.zwrite_file))  ((filefunc).zfile_func64.opaque,filestream,buf,size))
+//#define ZTELL64(filefunc,filestream)            ((*((filefunc).ztell64_file)) ((filefunc).opaque,filestream))
+//#define ZSEEK64(filefunc,filestream,pos,mode)   ((*((filefunc).zseek64_file)) ((filefunc).opaque,filestream,pos,mode))
+#define ZCLOSE64(filefunc,filestream)             ((*((filefunc).zfile_func64.zclose_file))  ((filefunc).zfile_func64.opaque,filestream))
+#define ZERROR64(filefunc,filestream)             ((*((filefunc).zfile_func64.zerror_file))  ((filefunc).zfile_func64.opaque,filestream))
+
+voidpf call_zopen64 OF((const zlib_filefunc64_32_def* pfilefunc,const void*filename,int mode));
+long    call_zseek64 OF((const zlib_filefunc64_32_def* pfilefunc,voidpf filestream, ZPOS64_T offset, int origin));
+ZPOS64_T call_ztell64 OF((const zlib_filefunc64_32_def* pfilefunc,voidpf filestream));
+
+void    fill_zlib_filefunc64_32_def_from_filefunc32(zlib_filefunc64_32_def* p_filefunc64_32,const zlib_filefunc_def* p_filefunc32);
+
+#define ZOPEN64(filefunc,filename,mode)         (call_zopen64((&(filefunc)),(filename),(mode)))
+#define ZTELL64(filefunc,filestream)            (call_ztell64((&(filefunc)),(filestream)))
+#define ZSEEK64(filefunc,filestream,pos,mode)   (call_zseek64((&(filefunc)),(filestream),(pos),(mode)))
+
 #ifdef __cplusplus
 }
 #endif
 
 #endif
-

contrib/minizip/iowin32.c

@@ -1,10 +1,14 @@
 /* iowin32.c -- IO base function header for compress/uncompress .zip
-   files using zlib + zip or unzip API
+     Version 1.1, February 14h, 2010
-   This IO API version uses the Win32 API (for Microsoft Windows)
+     part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
 
-   Version 1.00, September 10th, 2003
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+         Modifications for Zip64 support
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+
+     For more info read MiniZip_info.txt
 
-   Copyright (C) 1998-2003 Gilles Vollant
 */
 
 #include <stdlib.h>
@@ -21,40 +25,13 @@
 #define INVALID_SET_FILE_POINTER ((DWORD)-1)
 #endif
 
-voidpf ZCALLBACK win32_open_file_func OF((
+voidpf  ZCALLBACK win32_open_file_func  OF((voidpf opaque, const char* filename, int mode));
-   voidpf opaque,
+uLong   ZCALLBACK win32_read_file_func  OF((voidpf opaque, voidpf stream, void* buf, uLong size));
-   const char* filename,
+uLong   ZCALLBACK win32_write_file_func OF((voidpf opaque, voidpf stream, const void* buf, uLong size));
-   int mode));
+ZPOS64_T ZCALLBACK win32_tell64_file_func  OF((voidpf opaque, voidpf stream));
-
+long    ZCALLBACK win32_seek64_file_func  OF((voidpf opaque, voidpf stream, ZPOS64_T offset, int origin));
-uLong ZCALLBACK win32_read_file_func OF((
+int     ZCALLBACK win32_close_file_func OF((voidpf opaque, voidpf stream));
-   voidpf opaque,
+int     ZCALLBACK win32_error_file_func OF((voidpf opaque, voidpf stream));
-   voidpf stream,
-   void* buf,
-   uLong size));
-
-uLong ZCALLBACK win32_write_file_func OF((
-   voidpf opaque,
-   voidpf stream,
-   const void* buf,
-   uLong size));
-
-long ZCALLBACK win32_tell_file_func OF((
-   voidpf opaque,
-   voidpf stream));
-
-long ZCALLBACK win32_seek_file_func OF((
-   voidpf opaque,
-   voidpf stream,
-   uLong offset,
-   int origin));
-
-int ZCALLBACK win32_close_file_func OF((
-   voidpf opaque,
-   voidpf stream));
-
-int ZCALLBACK win32_error_file_func OF((
-   voidpf opaque,
-   voidpf stream));
 
 typedef struct
 {
@@ -62,69 +39,121 @@ typedef struct
     int error;
 } WIN32FILE_IOWIN;
 
-voidpf ZCALLBACK win32_open_file_func (opaque, filename, mode)
-   voidpf opaque;
-   const char* filename;
-   int mode;
-{
-    const char* mode_fopen = NULL;
-    DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ;
-    HANDLE hFile = 0;
-    voidpf ret=NULL;
 
-    dwDesiredAccess = dwShareMode = dwFlagsAndAttributes = 0;
+static void win32_translate_open_mode(int mode,
+                                      DWORD* lpdwDesiredAccess,
+                                      DWORD* lpdwCreationDisposition,
+                                      DWORD* lpdwShareMode,
+                                      DWORD* lpdwFlagsAndAttributes)
+{
+    *lpdwDesiredAccess = *lpdwShareMode = *lpdwFlagsAndAttributes = *lpdwCreationDisposition = 0;
 
     if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ)
     {
-        dwDesiredAccess = GENERIC_READ;
+        *lpdwDesiredAccess = GENERIC_READ;
-        dwCreationDisposition = OPEN_EXISTING;
+        *lpdwCreationDisposition = OPEN_EXISTING;
-        dwShareMode = FILE_SHARE_READ;
+        *lpdwShareMode = FILE_SHARE_READ;
     }
-    else
+    else if (mode & ZLIB_FILEFUNC_MODE_EXISTING)
-    if (mode & ZLIB_FILEFUNC_MODE_EXISTING)
     {
-        dwDesiredAccess = GENERIC_WRITE | GENERIC_READ;
+        *lpdwDesiredAccess = GENERIC_WRITE | GENERIC_READ;
-        dwCreationDisposition = OPEN_EXISTING;
+        *lpdwCreationDisposition = OPEN_EXISTING;
     }
-    else
+    else if (mode & ZLIB_FILEFUNC_MODE_CREATE)
-    if (mode & ZLIB_FILEFUNC_MODE_CREATE)
     {
-        dwDesiredAccess = GENERIC_WRITE | GENERIC_READ;
+        *lpdwDesiredAccess = GENERIC_WRITE | GENERIC_READ;
-        dwCreationDisposition = CREATE_ALWAYS;
+        *lpdwCreationDisposition = CREATE_ALWAYS;
     }
+}
 
-    if ((filename!=NULL) && (dwDesiredAccess != 0))
+static voidpf win32_build_iowin(HANDLE hFile)
-        hFile = CreateFile((LPCTSTR)filename, dwDesiredAccess, dwShareMode, NULL,
+{
-                      dwCreationDisposition, dwFlagsAndAttributes, NULL);
+    voidpf ret=NULL;
 
-    if (hFile == INVALID_HANDLE_VALUE)
+    if ((hFile != NULL) && (hFile != INVALID_HANDLE_VALUE))
-        hFile = NULL;
-
-    if (hFile != NULL)
     {
         WIN32FILE_IOWIN w32fiow;
         w32fiow.hf = hFile;
         w32fiow.error = 0;
         ret = malloc(sizeof(WIN32FILE_IOWIN));
+
         if (ret==NULL)
             CloseHandle(hFile);
-        else *((WIN32FILE_IOWIN*)ret) = w32fiow;
+        else
+            *((WIN32FILE_IOWIN*)ret) = w32fiow;
     }
     return ret;
 }
 
+voidpf ZCALLBACK win32_open64_file_func (voidpf opaque,const void* filename,int mode)
+{
+    const char* mode_fopen = NULL;
+    DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ;
+    HANDLE hFile = NULL;
 
-uLong ZCALLBACK win32_read_file_func (opaque, stream, buf, size)
+    win32_translate_open_mode(mode,&dwDesiredAccess,&dwCreationDisposition,&dwShareMode,&dwFlagsAndAttributes);
-   voidpf opaque;
+
-   voidpf stream;
+    if ((filename!=NULL) && (dwDesiredAccess != 0))
-   void* buf;
+        hFile = CreateFile((LPCTSTR)filename, dwDesiredAccess, dwShareMode, NULL, dwCreationDisposition, dwFlagsAndAttributes, NULL);
-   uLong size;
+
+    return win32_build_iowin(hFile);
+}
+
+
+voidpf ZCALLBACK win32_open64_file_funcA (voidpf opaque,const void* filename,int mode)
+{
+    const char* mode_fopen = NULL;
+    DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ;
+    HANDLE hFile = NULL;
+
+    win32_translate_open_mode(mode,&dwDesiredAccess,&dwCreationDisposition,&dwShareMode,&dwFlagsAndAttributes);
+
+    if ((filename!=NULL) && (dwDesiredAccess != 0))
+        hFile = CreateFileA((LPCSTR)filename, dwDesiredAccess, dwShareMode, NULL, dwCreationDisposition, dwFlagsAndAttributes, NULL);
+
+    return win32_build_iowin(hFile);
+}
+
+
+voidpf ZCALLBACK win32_open64_file_funcW (voidpf opaque,const void* filename,int mode)
+{
+    const char* mode_fopen = NULL;
+    DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ;
+    HANDLE hFile = NULL;
+
+    win32_translate_open_mode(mode,&dwDesiredAccess,&dwCreationDisposition,&dwShareMode,&dwFlagsAndAttributes);
+
+    if ((filename!=NULL) && (dwDesiredAccess != 0))
+        hFile = CreateFileW((LPCWSTR)filename, dwDesiredAccess, dwShareMode, NULL, dwCreationDisposition, dwFlagsAndAttributes, NULL);
+
+    return win32_build_iowin(hFile);
+}
+
+
+voidpf ZCALLBACK win32_open_file_func (voidpf opaque,const char* filename,int mode)
+{
+    const char* mode_fopen = NULL;
+    DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ;
+    HANDLE hFile = NULL;
+
+    win32_translate_open_mode(mode,&dwDesiredAccess,&dwCreationDisposition,&dwShareMode,&dwFlagsAndAttributes);
+
+    if ((filename!=NULL) && (dwDesiredAccess != 0))
+        hFile = CreateFile((LPCTSTR)filename, dwDesiredAccess, dwShareMode, NULL, dwCreationDisposition, dwFlagsAndAttributes, NULL);
+
+    return win32_build_iowin(hFile);
+}
+
+
+uLong ZCALLBACK win32_read_file_func (voidpf opaque, voidpf stream, void* buf,uLong size)
 {
     uLong ret=0;
     HANDLE hFile = NULL;
     if (stream!=NULL)
         hFile = ((WIN32FILE_IOWIN*)stream) -> hf;
+
     if (hFile != NULL)
+    {
         if (!ReadFile(hFile, buf, size, &ret, NULL))
         {
             DWORD dwErr = GetLastError();
@@ -132,23 +161,21 @@ uLong ZCALLBACK win32_read_file_func (opaque, stream, buf, size)
                 dwErr = 0;
             ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr;
         }
+    }
 
     return ret;
 }
 
 
-uLong ZCALLBACK win32_write_file_func (opaque, stream, buf, size)
+uLong ZCALLBACK win32_write_file_func (voidpf opaque,voidpf stream,const void* buf,uLong size)
-   voidpf opaque;
-   voidpf stream;
-   const void* buf;
-   uLong size;
 {
     uLong ret=0;
     HANDLE hFile = NULL;
     if (stream!=NULL)
         hFile = ((WIN32FILE_IOWIN*)stream) -> hf;
 
-    if (hFile !=NULL)
+    if (hFile != NULL)
+    {
         if (!WriteFile(hFile, buf, size, &ret, NULL))
         {
             DWORD dwErr = GetLastError();
@@ -156,13 +183,12 @@ uLong ZCALLBACK win32_write_file_func (opaque, stream, buf, size)
                 dwErr = 0;
             ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr;
         }
+    }
 
     return ret;
 }
 
-long ZCALLBACK win32_tell_file_func (opaque, stream)
+long ZCALLBACK win32_tell_file_func (voidpf opaque,voidpf stream)
-   voidpf opaque;
-   voidpf stream;
 {
     long ret=-1;
     HANDLE hFile = NULL;
@@ -183,11 +209,32 @@ long ZCALLBACK win32_tell_file_func (opaque, stream)
     return ret;
 }
 
-long ZCALLBACK win32_seek_file_func (opaque, stream, offset, origin)
+ZPOS64_T ZCALLBACK win32_tell64_file_func (voidpf opaque, voidpf stream)
-   voidpf opaque;
+{
-   voidpf stream;
+    ZPOS64_T ret= (ZPOS64_T)-1;
-   uLong offset;
+    HANDLE hFile = NULL;
-   int origin;
+    if (stream!=NULL)
+        hFile = ((WIN32FILE_IOWIN*)stream)->hf;
+
+    if (hFile)
+    {
+        LARGE_INTEGER li;
+        li.QuadPart = 0;
+        li.u.LowPart = SetFilePointer(hFile, li.u.LowPart, &li.u.HighPart, FILE_CURRENT);
+        if ( (li.LowPart == 0xFFFFFFFF) && (GetLastError() != NO_ERROR))
+        {
+            DWORD dwErr = GetLastError();
+            ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr;
+            ret = (ZPOS64_T)-1;
+        }
+        else
+            ret=li.QuadPart;
+    }
+    return ret;
+}
+
+
+long ZCALLBACK win32_seek_file_func (voidpf opaque,voidpf stream,uLong offset,int origin)
 {
     DWORD dwMoveMethod=0xFFFFFFFF;
     HANDLE hFile = NULL;
@@ -224,9 +271,46 @@ long ZCALLBACK win32_seek_file_func (opaque, stream, offset, origin)
     return ret;
 }
 
-int ZCALLBACK win32_close_file_func (opaque, stream)
+long ZCALLBACK win32_seek64_file_func (voidpf opaque, voidpf stream,ZPOS64_T offset,int origin)
-   voidpf opaque;
+{
-   voidpf stream;
+    DWORD dwMoveMethod=0xFFFFFFFF;
+    HANDLE hFile = NULL;
+    long ret=-1;
+
+    if (stream!=NULL)
+        hFile = ((WIN32FILE_IOWIN*)stream)->hf;
+
+    switch (origin)
+    {
+        case ZLIB_FILEFUNC_SEEK_CUR :
+            dwMoveMethod = FILE_CURRENT;
+            break;
+        case ZLIB_FILEFUNC_SEEK_END :
+            dwMoveMethod = FILE_END;
+            break;
+        case ZLIB_FILEFUNC_SEEK_SET :
+            dwMoveMethod = FILE_BEGIN;
+            break;
+        default: return -1;
+    }
+
+    if (hFile)
+    {
+        LARGE_INTEGER* li = (LARGE_INTEGER*)&offset;
+        DWORD dwSet = SetFilePointer(hFile, li->u.LowPart, &li->u.HighPart, dwMoveMethod);
+        if (dwSet == INVALID_SET_FILE_POINTER)
+        {
+            DWORD dwErr = GetLastError();
+            ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr;
+            ret = -1;
+        }
+        else
+            ret=0;
+    }
+    return ret;
+}
+
+int ZCALLBACK win32_close_file_func (voidpf opaque, voidpf stream)
 {
     int ret=-1;
 
@@ -244,9 +328,7 @@ int ZCALLBACK win32_close_file_func (opaque, stream)
     return ret;
 }
 
-int ZCALLBACK win32_error_file_func (opaque, stream)
+int ZCALLBACK win32_error_file_func (voidpf opaque,voidpf stream)
-   voidpf opaque;
-   voidpf stream;
 {
     int ret=-1;
     if (stream!=NULL)
@@ -256,8 +338,7 @@ int ZCALLBACK win32_error_file_func (opaque, stream)
     return ret;
 }
 
-void fill_win32_filefunc (pzlib_filefunc_def)
+void fill_win32_filefunc (zlib_filefunc_def* pzlib_filefunc_def)
-  zlib_filefunc_def* pzlib_filefunc_def;
 {
     pzlib_filefunc_def->zopen_file = win32_open_file_func;
     pzlib_filefunc_def->zread_file = win32_read_file_func;
@@ -266,5 +347,43 @@ void fill_win32_filefunc (pzlib_filefunc_def)
     pzlib_filefunc_def->zseek_file = win32_seek_file_func;
     pzlib_filefunc_def->zclose_file = win32_close_file_func;
     pzlib_filefunc_def->zerror_file = win32_error_file_func;
-    pzlib_filefunc_def->opaque=NULL;
+    pzlib_filefunc_def->opaque = NULL;
+}
+
+void fill_win32_filefunc64(zlib_filefunc64_def* pzlib_filefunc_def)
+{
+    pzlib_filefunc_def->zopen64_file = win32_open64_file_func;
+    pzlib_filefunc_def->zread_file = win32_read_file_func;
+    pzlib_filefunc_def->zwrite_file = win32_write_file_func;
+    pzlib_filefunc_def->ztell64_file = win32_tell64_file_func;
+    pzlib_filefunc_def->zseek64_file = win32_seek64_file_func;
+    pzlib_filefunc_def->zclose_file = win32_close_file_func;
+    pzlib_filefunc_def->zerror_file = win32_error_file_func;
+    pzlib_filefunc_def->opaque = NULL;
+}
+
+
+void fill_win32_filefunc64A(zlib_filefunc64_def* pzlib_filefunc_def)
+{
+    pzlib_filefunc_def->zopen64_file = win32_open64_file_funcA;
+    pzlib_filefunc_def->zread_file = win32_read_file_func;
+    pzlib_filefunc_def->zwrite_file = win32_write_file_func;
+    pzlib_filefunc_def->ztell64_file = win32_tell64_file_func;
+    pzlib_filefunc_def->zseek64_file = win32_seek64_file_func;
+    pzlib_filefunc_def->zclose_file = win32_close_file_func;
+    pzlib_filefunc_def->zerror_file = win32_error_file_func;
+    pzlib_filefunc_def->opaque = NULL;
+}
+
+
+void fill_win32_filefunc64W(zlib_filefunc64_def* pzlib_filefunc_def)
+{
+    pzlib_filefunc_def->zopen64_file = win32_open64_file_funcW;
+    pzlib_filefunc_def->zread_file = win32_read_file_func;
+    pzlib_filefunc_def->zwrite_file = win32_write_file_func;
+    pzlib_filefunc_def->ztell64_file = win32_tell64_file_func;
+    pzlib_filefunc_def->zseek64_file = win32_seek64_file_func;
+    pzlib_filefunc_def->zclose_file = win32_close_file_func;
+    pzlib_filefunc_def->zerror_file = win32_error_file_func;
+    pzlib_filefunc_def->opaque = NULL;
 }

contrib/minizip/iowin32.h

@@ -1,10 +1,14 @@
 /* iowin32.h -- IO base function header for compress/uncompress .zip
-   files using zlib + zip or unzip API
+     Version 1.1, February 14h, 2010
-   This IO API version uses the Win32 API (for Microsoft Windows)
+     part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
 
-   Version 1.00, September 10th, 2003
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+         Modifications for Zip64 support
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+
+         For more info read MiniZip_info.txt
 
-   Copyright (C) 1998-2003 Gilles Vollant
 */
 
 #include <windows.h>
@@ -15,6 +19,9 @@ extern "C" {
 #endif
 
 void fill_win32_filefunc OF((zlib_filefunc_def* pzlib_filefunc_def));
+void fill_win32_filefunc64 OF((zlib_filefunc64_def* pzlib_filefunc_def));
+void fill_win32_filefunc64A OF((zlib_filefunc64_def* pzlib_filefunc_def));
+void fill_win32_filefunc64W OF((zlib_filefunc64_def* pzlib_filefunc_def));
 
 #ifdef __cplusplus
 }

contrib/minizip/make_vms.com

@@ -0,0 +1,25 @@
+$ if f$search("ioapi.h_orig") .eqs. "" then copy ioapi.h ioapi.h_orig
+$ open/write zdef vmsdefs.h
+$ copy sys$input: zdef
+$ deck
+#define unix
+#define fill_zlib_filefunc64_32_def_from_filefunc32 fillzffunc64from
+#define Write_Zip64EndOfCentralDirectoryLocator Write_Zip64EoDLocator
+#define Write_Zip64EndOfCentralDirectoryRecord Write_Zip64EoDRecord
+#define Write_EndOfCentralDirectoryRecord Write_EoDRecord
+$ eod
+$ close zdef
+$ copy vmsdefs.h,ioapi.h_orig ioapi.h
+$ cc/include=[--]/prefix=all ioapi.c
+$ cc/include=[--]/prefix=all miniunz.c
+$ cc/include=[--]/prefix=all unzip.c
+$ cc/include=[--]/prefix=all minizip.c
+$ cc/include=[--]/prefix=all zip.c
+$ link miniunz,unzip,ioapi,[--]libz.olb/lib
+$ link minizip,zip,ioapi,[--]libz.olb/lib
+$ mcr []minizip test minizip_info.txt
+$ mcr []miniunz -l test.zip
+$ rename minizip_info.txt; minizip_info.txt_old
+$ mcr []miniunz test.zip
+$ delete test.zip;*
+$exit

contrib/minizip/miniunz.c

@@ -1,3 +1,32 @@
+/*
+   miniunz.c
+   Version 1.1, February 14h, 2010
+   sample part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
+
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+         Modifications of Unzip for Zip64
+         Copyright (C) 2007-2008 Even Rouault
+
+         Modifications for Zip64 support on both zip and unzip
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+*/
+
+#ifndef _WIN32
+        #ifndef __USE_FILE_OFFSET64
+                #define __USE_FILE_OFFSET64
+        #endif
+        #ifndef __USE_LARGEFILE64
+                #define __USE_LARGEFILE64
+        #endif
+        #ifndef _LARGEFILE64_SOURCE
+                #define _LARGEFILE64_SOURCE
+        #endif
+        #ifndef _FILE_OFFSET_BIT
+                #define _FILE_OFFSET_BIT 64
+        #endif
+#endif
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -19,7 +48,7 @@
 #define WRITEBUFFERSIZE (8192)
 #define MAXFILENAME (256)
 
-#ifdef WIN32
+#ifdef _WIN32
 #define USEWIN32IOAPI
 #include "iowin32.h"
 #endif
@@ -27,7 +56,7 @@
   mini unzip, demo of unzip package
 
   usage :
-  Usage : miniunz [-exvlo] file.zip [file_to_extract]
+  Usage : miniunz [-exvlo] file.zip [file_to_extract] [-d extractdir]
 
   list the file in the zipfile, and print the content of FILE_ID.ZIP or README.TXT
     if it exists
@@ -43,11 +72,11 @@ void change_file_date(filename,dosdate,tmu_date)
     uLong dosdate;
     tm_unz tmu_date;
 {
-#ifdef WIN32
+#ifdef _WIN32
   HANDLE hFile;
   FILETIME ftm,ftLocal,ftCreate,ftLastAcc,ftLastWrite;
 
-  hFile = CreateFile(filename,GENERIC_READ | GENERIC_WRITE,
+  hFile = CreateFileA(filename,GENERIC_READ | GENERIC_WRITE,
                       0,NULL,OPEN_EXISTING,0,NULL);
   GetFileTime(hFile,&ftCreate,&ftLastAcc,&ftLastWrite);
   DosDateTimeToFileTime((WORD)(dosdate>>16),(WORD)dosdate,&ftLocal);
@@ -83,8 +112,8 @@ int mymkdir(dirname)
     const char* dirname;
 {
     int ret=0;
-#ifdef WIN32
+#ifdef _WIN32
-    ret = mkdir(dirname);
+    ret = _mkdir(dirname);
 #else
 #ifdef unix
     ret = mkdir (dirname,0775);
@@ -104,6 +133,11 @@ int makedir (newdir)
     return 0;
 
   buffer = (char*)malloc(len+1);
+        if (buffer==NULL)
+        {
+                printf("Error allocating memory\n");
+                return UNZ_INTERNALERROR;
+        }
   strcpy(buffer,newdir);
 
   if (buffer[len-1] == '/') {
@@ -140,49 +174,77 @@ int makedir (newdir)
 
 void do_banner()
 {
-    printf("MiniUnz 1.00, demo of zLib + Unz package written by Gilles Vollant\n");
+    printf("MiniUnz 1.01b, demo of zLib + Unz package written by Gilles Vollant\n");
     printf("more info at http://www.winimage.com/zLibDll/unzip.html\n\n");
 }
 
 void do_help()
 {
-    printf("Usage : miniunz [-e] [-x] [-v] [-l] [-o] [-p password] file.zip [file_to_extr.]\n\n" \
+    printf("Usage : miniunz [-e] [-x] [-v] [-l] [-o] [-p password] file.zip [file_to_extr.] [-d extractdir]\n\n" \
            "  -e  Extract without pathname (junk paths)\n" \
            "  -x  Extract with pathname\n" \
            "  -v  list files\n" \
            "  -l  list files\n" \
+           "  -d  directory to extract into\n" \
            "  -o  overwrite files without prompting\n" \
            "  -p  extract crypted file using password\n\n");
 }
 
+void Display64BitsSize(ZPOS64_T n, int size_char)
+{
+  /* to avoid compatibility problem , we do here the conversion */
+  char number[21];
+  int offset=19;
+  int pos_string = 19;
+  number[20]=0;
+  for (;;) {
+      number[offset]=(char)((n%10)+'0');
+      if (number[offset] != '0')
+          pos_string=offset;
+      n/=10;
+      if (offset==0)
+          break;
+      offset--;
+  }
+  {
+      int size_display_string = 19-pos_string;
+      while (size_char > size_display_string)
+      {
+          size_char--;
+          printf(" ");
+      }
+  }
+
+  printf("%s",&number[pos_string]);
+}
 
 int do_list(uf)
     unzFile uf;
 {
     uLong i;
-    unz_global_info gi;
+    unz_global_info64 gi;
     int err;
 
-    err = unzGetGlobalInfo (uf,&gi);
+    err = unzGetGlobalInfo64(uf,&gi);
     if (err!=UNZ_OK)
         printf("error %d with zipfile in unzGetGlobalInfo \n",err);
-    printf(" Length  Method   Size  Ratio   Date    Time   CRC-32     Name\n");
+    printf("  Length  Method     Size Ratio   Date    Time   CRC-32     Name\n");
-    printf(" ------  ------   ----  -----   ----    ----   ------     ----\n");
+    printf("  ------  ------     ---- -----   ----    ----   ------     ----\n");
     for (i=0;i<gi.number_entry;i++)
     {
         char filename_inzip[256];
-        unz_file_info file_info;
+        unz_file_info64 file_info;
         uLong ratio=0;
         const char *string_method;
         char charCrypt=' ';
-        err = unzGetCurrentFileInfo(uf,&file_info,filename_inzip,sizeof(filename_inzip),NULL,0,NULL,0);
+        err = unzGetCurrentFileInfo64(uf,&file_info,filename_inzip,sizeof(filename_inzip),NULL,0,NULL,0);
         if (err!=UNZ_OK)
         {
             printf("error %d with zipfile in unzGetCurrentFileInfo\n",err);
             break;
         }
         if (file_info.uncompressed_size>0)
-            ratio = (file_info.compressed_size*100)/file_info.uncompressed_size;
+            ratio = (uLong)((file_info.compressed_size*100)/file_info.uncompressed_size);
 
         /* display a '*' if the file is crypted */
         if ((file_info.flag & 1) != 0)
@@ -201,13 +263,18 @@ int do_list(uf)
             else if ((iLevel==2) || (iLevel==3))
               string_method="Defl:F"; /* 2:fast , 3 : extra fast*/
         }
+        else
+        if (file_info.compression_method==Z_BZIP2ED)
+        {
+              string_method="BZip2 ";
+        }
         else
             string_method="Unkn. ";
 
-        printf("%7lu  %6s%c%7lu %3lu%%  %2.2lu-%2.2lu-%2.2lu  %2.2lu:%2.2lu  %8.8lx   %s\n",
+        Display64BitsSize(file_info.uncompressed_size,7);
-                file_info.uncompressed_size,string_method,
+        printf("  %6s%c",string_method,charCrypt);
-                charCrypt,
+        Display64BitsSize(file_info.compressed_size,7);
-                file_info.compressed_size,
+        printf(" %3lu%%  %2.2lu-%2.2lu-%2.2lu  %2.2lu:%2.2lu  %8.8lx   %s\n",
                 ratio,
                 (uLong)file_info.tmu_date.tm_mon + 1,
                 (uLong)file_info.tmu_date.tm_mday,
@@ -243,9 +310,9 @@ int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
     void* buf;
     uInt size_buf;
 
-    unz_file_info file_info;
+    unz_file_info64 file_info;
     uLong ratio=0;
-    err = unzGetCurrentFileInfo(uf,&file_info,filename_inzip,sizeof(filename_inzip),NULL,0,NULL,0);
+    err = unzGetCurrentFileInfo64(uf,&file_info,filename_inzip,sizeof(filename_inzip),NULL,0,NULL,0);
 
     if (err!=UNZ_OK)
     {
@@ -297,15 +364,21 @@ int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
         {
             char rep=0;
             FILE* ftestexist;
-            ftestexist = fopen(write_filename,"rb");
+            ftestexist = fopen64(write_filename,"rb");
             if (ftestexist!=NULL)
             {
                 fclose(ftestexist);
                 do
                 {
                     char answer[128];
-                    printf("The file %s exist. Overwrite ? [y]es, [n]o, [A]ll: ",write_filename);
+                    int ret;
-                    scanf("%1s",answer);
+
+                    printf("The file %s exists. Overwrite ? [y]es, [n]o, [A]ll: ",write_filename);
+                    ret = scanf("%1s",answer);
+                    if (ret != 1)
+                    {
+                       exit(EXIT_FAILURE);
+                    }
                     rep = answer[0] ;
                     if ((rep>='a') && (rep<='z'))
                         rep -= 0x20;
@@ -322,7 +395,7 @@ int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
 
         if ((skip==0) && (err==UNZ_OK))
         {
-            fout=fopen(write_filename,"wb");
+            fout=fopen64(write_filename,"wb");
 
             /* some zipfile don't contain directory alone before file */
             if ((fout==NULL) && ((*popt_extract_without_path)==0) &&
@@ -332,7 +405,7 @@ int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
                 *(filename_withoutpath-1)='\0';
                 makedir(write_filename);
                 *(filename_withoutpath-1)=c;
-                fout=fopen(write_filename,"wb");
+                fout=fopen64(write_filename,"wb");
             }
 
             if (fout==NULL)
@@ -394,11 +467,11 @@ int do_extract(uf,opt_extract_without_path,opt_overwrite,password)
     const char* password;
 {
     uLong i;
-    unz_global_info gi;
+    unz_global_info64 gi;
     int err;
     FILE* fout=NULL;
 
-    err = unzGetGlobalInfo (uf,&gi);
+    err = unzGetGlobalInfo64(uf,&gi);
     if (err!=UNZ_OK)
         printf("error %d with zipfile in unzGetGlobalInfo \n",err);
 
@@ -455,10 +528,13 @@ int main(argc,argv)
     const char *password=NULL;
     char filename_try[MAXFILENAME+16] = "";
     int i;
+    int ret_value=0;
     int opt_do_list=0;
     int opt_do_extract=1;
     int opt_do_extract_withoutpath=0;
     int opt_overwrite=0;
+    int opt_extractdir=0;
+    const char *dirname=NULL;
     unzFile uf=NULL;
 
     do_banner();
@@ -488,6 +564,12 @@ int main(argc,argv)
                         opt_do_extract = opt_do_extract_withoutpath = 1;
                     if ((c=='o') || (c=='O'))
                         opt_overwrite=1;
+                    if ((c=='d') || (c=='D'))
+                    {
+                        opt_extractdir=1;
+                        dirname=argv[i+1];
+                    }
+
                     if (((c=='p') || (c=='P')) && (i+1<argc))
                     {
                         password=argv[i+1];
@@ -499,7 +581,7 @@ int main(argc,argv)
             {
                 if (zipfilename == NULL)
                     zipfilename = argv[i];
-                else if (filename_to_extract==NULL)
+                else if ((filename_to_extract==NULL) && (!opt_extractdir))
                         filename_to_extract = argv[i] ;
             }
         }
@@ -509,7 +591,7 @@ int main(argc,argv)
     {
 
 #        ifdef USEWIN32IOAPI
-        zlib_filefunc_def ffunc;
+        zlib_filefunc64_def ffunc;
 #        endif
 
         strncpy(filename_try, zipfilename,MAXFILENAME-1);
@@ -517,18 +599,18 @@ int main(argc,argv)
         filename_try[ MAXFILENAME ] = '\0';
 
 #        ifdef USEWIN32IOAPI
-        fill_win32_filefunc(&ffunc);
+        fill_win32_filefunc64A(&ffunc);
-        uf = unzOpen2(zipfilename,&ffunc);
+        uf = unzOpen2_64(zipfilename,&ffunc);
 #        else
-        uf = unzOpen(zipfilename);
+        uf = unzOpen64(zipfilename);
 #        endif
         if (uf==NULL)
         {
             strcat(filename_try,".zip");
 #            ifdef USEWIN32IOAPI
-            uf = unzOpen2(filename_try,&ffunc);
+            uf = unzOpen2_64(filename_try,&ffunc);
 #            else
-            uf = unzOpen(filename_try);
+            uf = unzOpen64(filename_try);
 #            endif
         }
     }
@@ -541,16 +623,26 @@ int main(argc,argv)
     printf("%s opened\n",filename_try);
 
     if (opt_do_list==1)
-        return do_list(uf);
+        ret_value = do_list(uf);
     else if (opt_do_extract==1)
     {
-        if (filename_to_extract == NULL)
+#ifdef _WIN32
-            return do_extract(uf,opt_do_extract_withoutpath,opt_overwrite,password);
+        if (opt_extractdir && _chdir(dirname))
-        else
+#else
-            return do_extract_onefile(uf,filename_to_extract,
+        if (opt_extractdir && chdir(dirname))
-                                      opt_do_extract_withoutpath,opt_overwrite,password);
+#endif
-    }
+        {
-    unzCloseCurrentFile(uf);
+          printf("Error changing into %s, aborting\n", dirname);
+          exit(-1);
+        }
 
-    return 0;
+        if (filename_to_extract == NULL)
+            ret_value = do_extract(uf, opt_do_extract_withoutpath, opt_overwrite, password);
+        else
+            ret_value = do_extract_onefile(uf, filename_to_extract, opt_do_extract_withoutpath, opt_overwrite, password);
+    }
+
+    unzClose(uf);
+
+    return ret_value;
 }

contrib/minizip/minizip.c

@@ -1,3 +1,33 @@
+/*
+   minizip.c
+   Version 1.1, February 14h, 2010
+   sample part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
+
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+         Modifications of Unzip for Zip64
+         Copyright (C) 2007-2008 Even Rouault
+
+         Modifications for Zip64 support on both zip and unzip
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+*/
+
+
+#ifndef _WIN32
+        #ifndef __USE_FILE_OFFSET64
+                #define __USE_FILE_OFFSET64
+        #endif
+        #ifndef __USE_LARGEFILE64
+                #define __USE_LARGEFILE64
+        #endif
+        #ifndef _LARGEFILE64_SOURCE
+                #define _LARGEFILE64_SOURCE
+        #endif
+        #ifndef _FILE_OFFSET_BIT
+                #define _FILE_OFFSET_BIT 64
+        #endif
+#endif
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -17,9 +47,9 @@
 
 #include "zip.h"
 
-#ifdef WIN32
+#ifdef _WIN32
-#define USEWIN32IOAPI
+        #define USEWIN32IOAPI
-#include "iowin32.h"
+        #include "iowin32.h"
 #endif
 
 
@@ -27,7 +57,7 @@
 #define WRITEBUFFERSIZE (16384)
 #define MAXFILENAME (256)
 
-#ifdef WIN32
+#ifdef _WIN32
 uLong filetime(f, tmzip, dt)
     char *f;                /* name of file to get info on */
     tm_zip *tmzip;             /* return value: access, modific. and creation times */
@@ -37,9 +67,9 @@ uLong filetime(f, tmzip, dt)
   {
       FILETIME ftLocal;
       HANDLE hFind;
-      WIN32_FIND_DATA  ff32;
+      WIN32_FIND_DATAA ff32;
 
-      hFind = FindFirstFile(f,&ff32);
+      hFind = FindFirstFileA(f,&ff32);
       if (hFind != INVALID_HANDLE_VALUE)
       {
         FileTimeToLocalFileTime(&(ff32.ftLastWriteTime),&ftLocal);
@@ -53,8 +83,8 @@ uLong filetime(f, tmzip, dt)
 #else
 #ifdef unix
 uLong filetime(f, tmzip, dt)
-    char *f;                /* name of file to get info on */
+    char *f;               /* name of file to get info on */
-    tm_zip *tmzip;             /* return value: access, modific. and creation times */
+    tm_zip *tmzip;         /* return value: access, modific. and creation times */
     uLong *dt;             /* dostime */
 {
   int ret=0;
@@ -66,6 +96,8 @@ uLong filetime(f, tmzip, dt)
   {
     char name[MAXFILENAME+1];
     int len = strlen(f);
+    if (len > MAXFILENAME)
+      len = MAXFILENAME;
 
     strncpy(name, f,MAXFILENAME-1);
     /* strncpy doesnt append the trailing NULL, of the string is too long. */
@@ -110,7 +142,7 @@ int check_exist_file(filename)
 {
     FILE* ftestexist;
     int ret = 1;
-    ftestexist = fopen(filename,"rb");
+    ftestexist = fopen64(filename,"rb");
     if (ftestexist==NULL)
         ret = 0;
     else
@@ -120,18 +152,19 @@ int check_exist_file(filename)
 
 void do_banner()
 {
-    printf("MiniZip 1.00, demo of zLib + Zip package written by Gilles Vollant\n");
+    printf("MiniZip 1.1, demo of zLib + MiniZip64 package, written by Gilles Vollant\n");
-    printf("more info at http://www.winimage.com/zLibDll/unzip.html\n\n");
+    printf("more info on MiniZip at http://www.winimage.com/zLibDll/minizip.html\n\n");
 }
 
 void do_help()
 {
-    printf("Usage : minizip [-o] [-a] [-0 to -9] [-p password] file.zip [files_to_add]\n\n" \
+    printf("Usage : minizip [-o] [-a] [-0 to -9] [-p password] [-j] file.zip [files_to_add]\n\n" \
            "  -o  Overwrite existing file.zip\n" \
            "  -a  Append to existing file.zip\n" \
            "  -0  Store only\n" \
            "  -1  Compress faster\n" \
-           "  -9  Compress better\n\n");
+           "  -9  Compress better\n\n" \
+           "  -j  exclude path. store only the file name.\n\n");
 }
 
 /* calculate the CRC32 of a file,
@@ -140,7 +173,7 @@ int getFileCrc(const char* filenameinzip,void*buf,unsigned long size_buf,unsigne
 {
    unsigned long calculate_crc=0;
    int err=ZIP_OK;
-   FILE * fin = fopen(filenameinzip,"rb");
+   FILE * fin = fopen64(filenameinzip,"rb");
    unsigned long size_read = 0;
    unsigned long total_read = 0;
    if (fin==NULL)
@@ -170,10 +203,33 @@ int getFileCrc(const char* filenameinzip,void*buf,unsigned long size_buf,unsigne
         fclose(fin);
 
     *result_crc=calculate_crc;
-    printf("file %s crc %x\n",filenameinzip,calculate_crc);
+    printf("file %s crc %lx\n", filenameinzip, calculate_crc);
     return err;
 }
 
+int isLargeFile(const char* filename)
+{
+  int largeFile = 0;
+  ZPOS64_T pos = 0;
+  FILE* pFile = fopen64(filename, "rb");
+
+  if(pFile != NULL)
+  {
+    int n = fseeko64(pFile, 0, SEEK_END);
+
+    pos = ftello64(pFile);
+
+                printf("File : %s is %lld bytes\n", filename, pos);
+
+    if(pos >= 0xffffffff)
+     largeFile = 1;
+
+                fclose(pFile);
+  }
+
+ return largeFile;
+}
+
 int main(argc,argv)
     int argc;
     char *argv[];
@@ -181,6 +237,7 @@ int main(argc,argv)
     int i;
     int opt_overwrite=0;
     int opt_compress_level=Z_DEFAULT_COMPRESSION;
+    int opt_exclude_path=0;
     int zipfilenamearg = 0;
     char filename_try[MAXFILENAME+16];
     int zipok;
@@ -213,6 +270,8 @@ int main(argc,argv)
                         opt_overwrite = 2;
                     if ((c>='0') && (c<='9'))
                         opt_compress_level = c-'0';
+                    if ((c=='j') || (c=='J'))
+                        opt_exclude_path = 1;
 
                     if (((c=='p') || (c=='P')) && (i+1<argc))
                     {
@@ -222,8 +281,12 @@ int main(argc,argv)
                 }
             }
             else
+            {
                 if (zipfilenamearg == 0)
+                {
                     zipfilenamearg = i ;
+                }
+            }
         }
     }
 
@@ -236,7 +299,9 @@ int main(argc,argv)
     }
 
     if (zipfilenamearg==0)
+    {
         zipok=0;
+    }
     else
     {
         int i,len;
@@ -269,8 +334,13 @@ int main(argc,argv)
                 do
                 {
                     char answer[128];
-                    printf("The file %s exist. Overwrite ? [y]es, [n]o, [a]ppend : ",filename_try);
+                    int ret;
-                    scanf("%1s",answer);
+                    printf("The file %s exists. Overwrite ? [y]es, [n]o, [a]ppend : ",filename_try);
+                    ret = scanf("%1s",answer);
+                    if (ret != 1)
+                    {
+                       exit(EXIT_FAILURE);
+                    }
                     rep = answer[0] ;
                     if ((rep>='a') && (rep<='z'))
                         rep -= 0x20;
@@ -288,11 +358,11 @@ int main(argc,argv)
         zipFile zf;
         int errclose;
 #        ifdef USEWIN32IOAPI
-        zlib_filefunc_def ffunc;
+        zlib_filefunc64_def ffunc;
-        fill_win32_filefunc(&ffunc);
+        fill_win32_filefunc64A(&ffunc);
-        zf = zipOpen2(filename_try,(opt_overwrite==2) ? 2 : 0,NULL,&ffunc);
+        zf = zipOpen2_64(filename_try,(opt_overwrite==2) ? 2 : 0,NULL,&ffunc);
 #        else
-        zf = zipOpen(filename_try,(opt_overwrite==2) ? 2 : 0);
+        zf = zipOpen64(filename_try,(opt_overwrite==2) ? 2 : 0);
 #        endif
 
         if (zf == NULL)
@@ -305,13 +375,20 @@ int main(argc,argv)
 
         for (i=zipfilenamearg+1;(i<argc) && (err==ZIP_OK);i++)
         {
-            if (((*(argv[i]))!='-') && ((*(argv[i]))!='/'))
+            if (!((((*(argv[i]))=='-') || ((*(argv[i]))=='/')) &&
+                  ((argv[i][1]=='o') || (argv[i][1]=='O') ||
+                   (argv[i][1]=='a') || (argv[i][1]=='A') ||
+                   (argv[i][1]=='p') || (argv[i][1]=='P') ||
+                   ((argv[i][1]>='0') || (argv[i][1]<='9'))) &&
+                  (strlen(argv[i]) == 2)))
             {
                 FILE * fin;
                 int size_read;
                 const char* filenameinzip = argv[i];
+                const char *savefilenameinzip;
                 zip_fileinfo zi;
                 unsigned long crcFile=0;
+                int zip64 = 0;
 
                 zi.tmz_date.tm_sec = zi.tmz_date.tm_min = zi.tmz_date.tm_hour =
                 zi.tmz_date.tm_mday = zi.tmz_date.tm_mon = zi.tmz_date.tm_year = 0;
@@ -329,19 +406,48 @@ int main(argc,argv)
                 if ((password != NULL) && (err==ZIP_OK))
                     err = getFileCrc(filenameinzip,buf,size_buf,&crcFile);
 
-                err = zipOpenNewFileInZip3(zf,filenameinzip,&zi,
+                zip64 = isLargeFile(filenameinzip);
+
+                                                         /* The path name saved, should not include a leading slash. */
+               /*if it did, windows/xp and dynazip couldn't read the zip file. */
+                 savefilenameinzip = filenameinzip;
+                 while( savefilenameinzip[0] == '\\' || savefilenameinzip[0] == '/' )
+                 {
+                     savefilenameinzip++;
+                 }
+
+                 /*should the zip file contain any path at all?*/
+                 if( opt_exclude_path )
+                 {
+                     const char *tmpptr;
+                     const char *lastslash = 0;
+                     for( tmpptr = savefilenameinzip; *tmpptr; tmpptr++)
+                     {
+                         if( *tmpptr == '\\' || *tmpptr == '/')
+                         {
+                             lastslash = tmpptr;
+                         }
+                     }
+                     if( lastslash != NULL )
+                     {
+                         savefilenameinzip = lastslash+1; // base filename follows last slash.
+                     }
+                 }
+
+                 /**/
+                err = zipOpenNewFileInZip3_64(zf,savefilenameinzip,&zi,
                                  NULL,0,NULL,0,NULL /* comment*/,
                                  (opt_compress_level != 0) ? Z_DEFLATED : 0,
                                  opt_compress_level,0,
                                  /* -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, */
                                  -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY,
-                                 password,crcFile);
+                                 password,crcFile, zip64);
 
                 if (err != ZIP_OK)
                     printf("error in opening %s in zipfile\n",filenameinzip);
                 else
                 {
-                    fin = fopen(filenameinzip,"rb");
+                    fin = fopen64(filenameinzip,"rb");
                     if (fin==NULL)
                     {
                         err=ZIP_ERRNO;
@@ -390,7 +496,11 @@ int main(argc,argv)
         errclose = zipClose(zf,NULL);
         if (errclose != ZIP_OK)
             printf("error in closing %s\n",filename_try);
-   }
+    }
+    else
+    {
+       do_help();
+    }
 
     free(buf);
     return 0;

contrib/minizip/mztools.c

@@ -0,0 +1,281 @@
+/*
+  Additional tools for Minizip
+  Code: Xavier Roche '2004
+  License: Same as ZLIB (www.gzip.org)
+*/
+
+/* Code */
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "zlib.h"
+#include "unzip.h"
+
+#define READ_8(adr)  ((unsigned char)*(adr))
+#define READ_16(adr) ( READ_8(adr) | (READ_8(adr+1) << 8) )
+#define READ_32(adr) ( READ_16(adr) | (READ_16((adr)+2) << 16) )
+
+#define WRITE_8(buff, n) do { \
+  *((unsigned char*)(buff)) = (unsigned char) ((n) & 0xff); \
+} while(0)
+#define WRITE_16(buff, n) do { \
+  WRITE_8((unsigned char*)(buff), n); \
+  WRITE_8(((unsigned char*)(buff)) + 1, (n) >> 8); \
+} while(0)
+#define WRITE_32(buff, n) do { \
+  WRITE_16((unsigned char*)(buff), (n) & 0xffff); \
+  WRITE_16((unsigned char*)(buff) + 2, (n) >> 16); \
+} while(0)
+
+extern int ZEXPORT unzRepair(file, fileOut, fileOutTmp, nRecovered, bytesRecovered)
+const char* file;
+const char* fileOut;
+const char* fileOutTmp;
+uLong* nRecovered;
+uLong* bytesRecovered;
+{
+  int err = Z_OK;
+  FILE* fpZip = fopen(file, "rb");
+  FILE* fpOut = fopen(fileOut, "wb");
+  FILE* fpOutCD = fopen(fileOutTmp, "wb");
+  if (fpZip != NULL &&  fpOut != NULL) {
+    int entries = 0;
+    uLong totalBytes = 0;
+    char header[30];
+    char filename[256];
+    char extra[1024];
+    int offset = 0;
+    int offsetCD = 0;
+    while ( fread(header, 1, 30, fpZip) == 30 ) {
+      int currentOffset = offset;
+
+      /* File entry */
+      if (READ_32(header) == 0x04034b50) {
+        unsigned int version = READ_16(header + 4);
+        unsigned int gpflag = READ_16(header + 6);
+        unsigned int method = READ_16(header + 8);
+        unsigned int filetime = READ_16(header + 10);
+        unsigned int filedate = READ_16(header + 12);
+        unsigned int crc = READ_32(header + 14); /* crc */
+        unsigned int cpsize = READ_32(header + 18); /* compressed size */
+        unsigned int uncpsize = READ_32(header + 22); /* uncompressed sz */
+        unsigned int fnsize = READ_16(header + 26); /* file name length */
+        unsigned int extsize = READ_16(header + 28); /* extra field length */
+        filename[0] = extra[0] = '\0';
+
+        /* Header */
+        if (fwrite(header, 1, 30, fpOut) == 30) {
+          offset += 30;
+        } else {
+          err = Z_ERRNO;
+          break;
+        }
+
+        /* Filename */
+        if (fnsize > 0) {
+          if (fread(filename, 1, fnsize, fpZip) == fnsize) {
+            if (fwrite(filename, 1, fnsize, fpOut) == fnsize) {
+              offset += fnsize;
+            } else {
+              err = Z_ERRNO;
+              break;
+            }
+          } else {
+            err = Z_ERRNO;
+            break;
+          }
+        } else {
+          err = Z_STREAM_ERROR;
+          break;
+        }
+
+        /* Extra field */
+        if (extsize > 0) {
+          if (fread(extra, 1, extsize, fpZip) == extsize) {
+            if (fwrite(extra, 1, extsize, fpOut) == extsize) {
+              offset += extsize;
+            } else {
+              err = Z_ERRNO;
+              break;
+            }
+          } else {
+            err = Z_ERRNO;
+            break;
+          }
+        }
+
+        /* Data */
+        {
+          int dataSize = cpsize;
+          if (dataSize == 0) {
+            dataSize = uncpsize;
+          }
+          if (dataSize > 0) {
+            char* data = malloc(dataSize);
+            if (data != NULL) {
+              if ((int)fread(data, 1, dataSize, fpZip) == dataSize) {
+                if ((int)fwrite(data, 1, dataSize, fpOut) == dataSize) {
+                  offset += dataSize;
+                  totalBytes += dataSize;
+                } else {
+                  err = Z_ERRNO;
+                }
+              } else {
+                err = Z_ERRNO;
+              }
+              free(data);
+              if (err != Z_OK) {
+                break;
+              }
+            } else {
+              err = Z_MEM_ERROR;
+              break;
+            }
+          }
+        }
+
+        /* Central directory entry */
+        {
+          char header[46];
+          char* comment = "";
+          int comsize = (int) strlen(comment);
+          WRITE_32(header, 0x02014b50);
+          WRITE_16(header + 4, version);
+          WRITE_16(header + 6, version);
+          WRITE_16(header + 8, gpflag);
+          WRITE_16(header + 10, method);
+          WRITE_16(header + 12, filetime);
+          WRITE_16(header + 14, filedate);
+          WRITE_32(header + 16, crc);
+          WRITE_32(header + 20, cpsize);
+          WRITE_32(header + 24, uncpsize);
+          WRITE_16(header + 28, fnsize);
+          WRITE_16(header + 30, extsize);
+          WRITE_16(header + 32, comsize);
+          WRITE_16(header + 34, 0);     /* disk # */
+          WRITE_16(header + 36, 0);     /* int attrb */
+          WRITE_32(header + 38, 0);     /* ext attrb */
+          WRITE_32(header + 42, currentOffset);
+          /* Header */
+          if (fwrite(header, 1, 46, fpOutCD) == 46) {
+            offsetCD += 46;
+
+            /* Filename */
+            if (fnsize > 0) {
+              if (fwrite(filename, 1, fnsize, fpOutCD) == fnsize) {
+                offsetCD += fnsize;
+              } else {
+                err = Z_ERRNO;
+                break;
+              }
+            } else {
+              err = Z_STREAM_ERROR;
+              break;
+            }
+
+            /* Extra field */
+            if (extsize > 0) {
+              if (fwrite(extra, 1, extsize, fpOutCD) == extsize) {
+                offsetCD += extsize;
+              } else {
+                err = Z_ERRNO;
+                break;
+              }
+            }
+
+            /* Comment field */
+            if (comsize > 0) {
+              if ((int)fwrite(comment, 1, comsize, fpOutCD) == comsize) {
+                offsetCD += comsize;
+              } else {
+                err = Z_ERRNO;
+                break;
+              }
+            }
+
+
+          } else {
+            err = Z_ERRNO;
+            break;
+          }
+        }
+
+        /* Success */
+        entries++;
+
+      } else {
+        break;
+      }
+    }
+
+    /* Final central directory  */
+    {
+      int entriesZip = entries;
+      char header[22];
+      char* comment = ""; // "ZIP File recovered by zlib/minizip/mztools";
+      int comsize = (int) strlen(comment);
+      if (entriesZip > 0xffff) {
+        entriesZip = 0xffff;
+      }
+      WRITE_32(header, 0x06054b50);
+      WRITE_16(header + 4, 0);    /* disk # */
+      WRITE_16(header + 6, 0);    /* disk # */
+      WRITE_16(header + 8, entriesZip);   /* hack */
+      WRITE_16(header + 10, entriesZip);  /* hack */
+      WRITE_32(header + 12, offsetCD);    /* size of CD */
+      WRITE_32(header + 16, offset);      /* offset to CD */
+      WRITE_16(header + 20, comsize);     /* comment */
+
+      /* Header */
+      if (fwrite(header, 1, 22, fpOutCD) == 22) {
+
+        /* Comment field */
+        if (comsize > 0) {
+          if ((int)fwrite(comment, 1, comsize, fpOutCD) != comsize) {
+            err = Z_ERRNO;
+          }
+        }
+
+      } else {
+        err = Z_ERRNO;
+      }
+    }
+
+    /* Final merge (file + central directory) */
+    fclose(fpOutCD);
+    if (err == Z_OK) {
+      fpOutCD = fopen(fileOutTmp, "rb");
+      if (fpOutCD != NULL) {
+        int nRead;
+        char buffer[8192];
+        while ( (nRead = (int)fread(buffer, 1, sizeof(buffer), fpOutCD)) > 0) {
+          if ((int)fwrite(buffer, 1, nRead, fpOut) != nRead) {
+            err = Z_ERRNO;
+            break;
+          }
+        }
+        fclose(fpOutCD);
+      }
+    }
+
+    /* Close */
+    fclose(fpZip);
+    fclose(fpOut);
+
+    /* Wipe temporary file */
+    (void)remove(fileOutTmp);
+
+    /* Number of recovered entries */
+    if (err == Z_OK) {
+      if (nRecovered != NULL) {
+        *nRecovered = entries;
+      }
+      if (bytesRecovered != NULL) {
+        *bytesRecovered = totalBytes;
+      }
+    }
+  } else {
+    err = Z_STREAM_ERROR;
+  }
+  return err;
+}

contrib/minizip/mztools.h

@@ -0,0 +1,31 @@
+/*
+  Additional tools for Minizip
+  Code: Xavier Roche '2004
+  License: Same as ZLIB (www.gzip.org)
+*/
+
+#ifndef _zip_tools_H
+#define _zip_tools_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef _ZLIB_H
+#include "zlib.h"
+#endif
+
+#include "unzip.h"
+
+/* Repair a ZIP file (missing central directory)
+   file: file to recover
+   fileOut: output file after recovery
+   fileOutTmp: temporary file name used for recovery
+*/
+extern int ZEXPORT unzRepair(const char* file,
+                             const char* fileOut,
+                             const char* fileOutTmp,
+                             uLong* nRecovered,
+                             uLong* bytesRecovered);
+
+#endif

contrib/minizip/unzip.h

@@ -1,18 +1,20 @@
 /* unzip.h -- IO for uncompress .zip files using zlib
-   Version 1.00, September 10th, 2003
+   Version 1.1, February 14h, 2010
+   part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
 
-   Copyright (C) 1998-2003 Gilles Vollant
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
 
-   This unzip package allow extract file from .ZIP file, compatible with PKZip 2.04g
+         Modifications of Unzip for Zip64
-     WinZip, InfoZip tools and compatible.
+         Copyright (C) 2007-2008 Even Rouault
-   Encryption and multi volume ZipFile (span) are not supported.
-   Old compressions used by old PKZip 1.x are not supported
 
+         Modifications for Zip64 support on both zip and unzip
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
 
-   I WAIT FEEDBACK at mail info@winimage.com
+         For more info read MiniZip_info.txt
-   Visit also http://www.winimage.com/zLibDll/unzip.htm for evolution
 
-   Condition of use and distribution are the same than zlib :
+         ---------------------------------------------------------------------------------
+
+        Condition of use and distribution are the same than zlib :
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
@@ -30,18 +32,16 @@
      misrepresented as being the original software.
   3. This notice may not be removed or altered from any source distribution.
 
+  ---------------------------------------------------------------------------------
+
+        Changes
+
+        See header of unzip64.c
 
 */
 
-/* for more info about .ZIP format, see
+#ifndef _unz64_H
-      http://www.info-zip.org/pub/infozip/doc/appnote-981119-iz.zip
+#define _unz64_H
-      http://www.info-zip.org/pub/infozip/doc/
-   PkWare has also a specification at :
-      ftp://ftp.pkware.com/probdesc.zip
-*/
-
-#ifndef _unz_H
-#define _unz_H
 
 #ifdef __cplusplus
 extern "C" {
@@ -51,10 +51,16 @@ extern "C" {
 #include "zlib.h"
 #endif
 
-#ifndef _ZLIBIOAPI_H
+#ifndef  _ZLIBIOAPI_H
 #include "ioapi.h"
 #endif
 
+#ifdef HAVE_BZIP2
+#include "bzlib.h"
+#endif
+
+#define Z_BZIP2ED 12
+
 #if defined(STRICTUNZIP) || defined(STRICTZIPUNZIP)
 /* like the STRICT of WIN32, we define a pointer that cannot be converted
     from (void*) without cast */
@@ -87,15 +93,42 @@ typedef struct tm_unz_s
 
 /* unz_global_info structure contain global data about the ZIPfile
    These data comes from the end of central dir */
+typedef struct unz_global_info64_s
+{
+    ZPOS64_T number_entry;         /* total number of entries in
+                                     the central dir on this disk */
+    uLong size_comment;         /* size of the global comment of the zipfile */
+} unz_global_info64;
+
 typedef struct unz_global_info_s
 {
     uLong number_entry;         /* total number of entries in
-                       the central dir on this disk */
+                                     the central dir on this disk */
     uLong size_comment;         /* size of the global comment of the zipfile */
 } unz_global_info;
 
-
 /* unz_file_info contain information about a file in the zipfile */
+typedef struct unz_file_info64_s
+{
+    uLong version;              /* version made by                 2 bytes */
+    uLong version_needed;       /* version needed to extract       2 bytes */
+    uLong flag;                 /* general purpose bit flag        2 bytes */
+    uLong compression_method;   /* compression method              2 bytes */
+    uLong dosDate;              /* last mod file date in Dos fmt   4 bytes */
+    uLong crc;                  /* crc-32                          4 bytes */
+    ZPOS64_T compressed_size;   /* compressed size                 8 bytes */
+    ZPOS64_T uncompressed_size; /* uncompressed size               8 bytes */
+    uLong size_filename;        /* filename length                 2 bytes */
+    uLong size_file_extra;      /* extra field length              2 bytes */
+    uLong size_file_comment;    /* file comment length             2 bytes */
+
+    uLong disk_num_start;       /* disk number start               2 bytes */
+    uLong internal_fa;          /* internal file attributes        2 bytes */
+    uLong external_fa;          /* external file attributes        4 bytes */
+
+    tm_unz tmu_date;
+} unz_file_info64;
+
 typedef struct unz_file_info_s
 {
     uLong version;              /* version made by                 2 bytes */
@@ -131,6 +164,7 @@ extern int ZEXPORT unzStringFileNameCompare OF ((const char* fileName1,
 
 
 extern unzFile ZEXPORT unzOpen OF((const char *path));
+extern unzFile ZEXPORT unzOpen64 OF((const void *path));
 /*
   Open a Zip file. path contain the full pathname (by example,
      on a Windows XP computer "c:\\zlib\\zlib113.zip" or on an Unix computer
@@ -139,8 +173,14 @@ extern unzFile ZEXPORT unzOpen OF((const char *path));
        return value is NULL.
      Else, the return value is a unzFile Handle, usable with other function
        of this unzip package.
+     the "64" function take a const void* pointer, because the path is just the
+       value passed to the open64_file_func callback.
+     Under Windows, if UNICODE is defined, using fill_fopen64_filefunc, the path
+       is a pointer to a wide unicode string (LPCTSTR is LPCWSTR), so const char*
+       does not describe the reality
 */
 
+
 extern unzFile ZEXPORT unzOpen2 OF((const char *path,
                                     zlib_filefunc_def* pzlib_filefunc_def));
 /*
@@ -148,6 +188,13 @@ extern unzFile ZEXPORT unzOpen2 OF((const char *path,
       for read/write the zip file (see ioapi.h)
 */
 
+extern unzFile ZEXPORT unzOpen2_64 OF((const void *path,
+                                    zlib_filefunc64_def* pzlib_filefunc_def));
+/*
+   Open a Zip file, like unz64Open, but provide a set of file low level API
+      for read/write the zip file (see ioapi.h)
+*/
+
 extern int ZEXPORT unzClose OF((unzFile file));
 /*
   Close a ZipFile opened with unzipOpen.
@@ -157,6 +204,9 @@ extern int ZEXPORT unzClose OF((unzFile file));
 
 extern int ZEXPORT unzGetGlobalInfo OF((unzFile file,
                                         unz_global_info *pglobal_info));
+
+extern int ZEXPORT unzGetGlobalInfo64 OF((unzFile file,
+                                        unz_global_info64 *pglobal_info));
 /*
   Write info about the ZipFile in the *pglobal_info structure.
   No preparation of the structure is needed
@@ -219,8 +269,31 @@ extern int ZEXPORT unzGoToFilePos(
     unzFile file,
     unz_file_pos* file_pos);
 
+typedef struct unz64_file_pos_s
+{
+    ZPOS64_T pos_in_zip_directory;   /* offset in zip file directory */
+    ZPOS64_T num_of_file;            /* # of file */
+} unz64_file_pos;
+
+extern int ZEXPORT unzGetFilePos64(
+    unzFile file,
+    unz64_file_pos* file_pos);
+
+extern int ZEXPORT unzGoToFilePos64(
+    unzFile file,
+    const unz64_file_pos* file_pos);
+
 /* ****************************************** */
 
+extern int ZEXPORT unzGetCurrentFileInfo64 OF((unzFile file,
+                         unz_file_info64 *pfile_info,
+                         char *szFileName,
+                         uLong fileNameBufferSize,
+                         void *extraField,
+                         uLong extraFieldBufferSize,
+                         char *szComment,
+                         uLong commentBufferSize));
+
 extern int ZEXPORT unzGetCurrentFileInfo OF((unzFile file,
                          unz_file_info *pfile_info,
                          char *szFileName,
@@ -242,6 +315,14 @@ extern int ZEXPORT unzGetCurrentFileInfo OF((unzFile file,
             (commentBufferSize is the size of the buffer)
 */
 
+
+/** Addition for GDAL : START */
+
+extern ZPOS64_T ZEXPORT unzGetCurrentFileZStreamPos64 OF((unzFile file));
+
+/** Addition for GDAL : END */
+
+
 /***************************************************************************/
 /* for reading the content of the current zipfile, you can open it, read data
    from it, and close it (you can close it before reading all the file)
@@ -310,6 +391,8 @@ extern int ZEXPORT unzReadCurrentFile OF((unzFile file,
 */
 
 extern z_off_t ZEXPORT unztell OF((unzFile file));
+
+extern ZPOS64_T ZEXPORT unztell64 OF((unzFile file));
 /*
   Give the current position in uncompressed data
 */
@@ -335,8 +418,20 @@ extern int ZEXPORT unzGetLocalExtrafield OF((unzFile file,
     the error code
 */
 
+/***************************************************************************/
+
+/* Get the current file offset */
+extern ZPOS64_T ZEXPORT unzGetOffset64 (unzFile file);
+extern uLong ZEXPORT unzGetOffset (unzFile file);
+
+/* Set the current file offset */
+extern int ZEXPORT unzSetOffset64 (unzFile file, ZPOS64_T pos);
+extern int ZEXPORT unzSetOffset (unzFile file, uLong pos);
+
+
+
 #ifdef __cplusplus
 }
 #endif
 
-#endif /* _unz_H */
+#endif /* _unz64_H */

contrib/minizip/zip.h

@@ -1,18 +1,15 @@
-/* zip.h -- IO for compress .zip files using zlib
+/* zip.h -- IO on .zip files using zlib
-   Version 1.00, September 10th, 2003
+   Version 1.1, February 14h, 2010
+   part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
 
-   Copyright (C) 1998-2003 Gilles Vollant
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
 
-   This unzip package allow creates .ZIP file, compatible with PKZip 2.04g
+         Modifications for Zip64 support
-     WinZip, InfoZip tools and compatible.
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
-   Encryption and multi volume ZipFile (span) are not supported.
-   Old compressions used by old PKZip 1.x are not supported
 
-  For uncompress .zip file, look at unzip.h
+         For more info read MiniZip_info.txt
 
-
+         ---------------------------------------------------------------------------
-   I WAIT FEEDBACK at mail info@winimage.com
-   Visit also http://www.winimage.com/zLibDll/unzip.html for evolution
 
    Condition of use and distribution are the same than zlib :
 
@@ -32,23 +29,23 @@
      misrepresented as being the original software.
   3. This notice may not be removed or altered from any source distribution.
 
+        ---------------------------------------------------------------------------
+
+        Changes
+
+        See header of zip.h
 
 */
 
-/* for more info about .ZIP format, see
+#ifndef _zip12_H
-      http://www.info-zip.org/pub/infozip/doc/appnote-981119-iz.zip
+#define _zip12_H
-      http://www.info-zip.org/pub/infozip/doc/
-   PkWare has also a specification at :
-      ftp://ftp.pkware.com/probdesc.zip
-*/
-
-#ifndef _zip_H
-#define _zip_H
 
 #ifdef __cplusplus
 extern "C" {
 #endif
 
+//#define HAVE_BZIP2
+
 #ifndef _ZLIB_H
 #include "zlib.h"
 #endif
@@ -57,6 +54,12 @@ extern "C" {
 #include "ioapi.h"
 #endif
 
+#ifdef HAVE_BZIP2
+#include "bzlib.h"
+#endif
+
+#define Z_BZIP2ED 12
+
 #if defined(STRICTZIP) || defined(STRICTZIPUNZIP)
 /* like the STRICT of WIN32, we define a pointer that cannot be converted
     from (void*) without cast */
@@ -111,6 +114,7 @@ typedef const char* zipcharpc;
 #define APPEND_STATUS_ADDINZIP      (2)
 
 extern zipFile ZEXPORT zipOpen OF((const char *pathname, int append));
+extern zipFile ZEXPORT zipOpen64 OF((const void *pathname, int append));
 /*
   Create a zipfile.
      pathname contain on Windows XP a filename like "c:\\zlib\\zlib113.zip" or on
@@ -135,6 +139,11 @@ extern zipFile ZEXPORT zipOpen2 OF((const char *pathname,
                                    zipcharpc* globalcomment,
                                    zlib_filefunc_def* pzlib_filefunc_def));
 
+extern zipFile ZEXPORT zipOpen2_64 OF((const void *pathname,
+                                   int append,
+                                   zipcharpc* globalcomment,
+                                   zlib_filefunc64_def* pzlib_filefunc_def));
+
 extern int ZEXPORT zipOpenNewFileInZip OF((zipFile file,
                        const char* filename,
                        const zip_fileinfo* zipfi,
@@ -145,6 +154,19 @@ extern int ZEXPORT zipOpenNewFileInZip OF((zipFile file,
                        const char* comment,
                        int method,
                        int level));
+
+extern int ZEXPORT zipOpenNewFileInZip64 OF((zipFile file,
+                       const char* filename,
+                       const zip_fileinfo* zipfi,
+                       const void* extrafield_local,
+                       uInt size_extrafield_local,
+                       const void* extrafield_global,
+                       uInt size_extrafield_global,
+                       const char* comment,
+                       int method,
+                       int level,
+                       int zip64));
+
 /*
   Open a file in the ZIP for writing.
   filename : the filename in zip (if NULL, '-' without quote will be used
@@ -156,6 +178,9 @@ extern int ZEXPORT zipOpenNewFileInZip OF((zipFile file,
   if comment != NULL, comment contain the comment string
   method contain the compression method (0 for store, Z_DEFLATED for deflate)
   level contain the level of compression (can be Z_DEFAULT_COMPRESSION)
+  zip64 is set to 1 if a zip64 extended information block should be added to the local file header.
+                    this MUST be '1' if the uncompressed size is >= 0xffffffff.
+
 */
 
 
@@ -171,6 +196,19 @@ extern int ZEXPORT zipOpenNewFileInZip2 OF((zipFile file,
                                             int level,
                                             int raw));
 
+
+extern int ZEXPORT zipOpenNewFileInZip2_64 OF((zipFile file,
+                                            const char* filename,
+                                            const zip_fileinfo* zipfi,
+                                            const void* extrafield_local,
+                                            uInt size_extrafield_local,
+                                            const void* extrafield_global,
+                                            uInt size_extrafield_global,
+                                            const char* comment,
+                                            int method,
+                                            int level,
+                                            int raw,
+                                            int zip64));
 /*
   Same than zipOpenNewFileInZip, except if raw=1, we write raw file
  */
@@ -190,13 +228,79 @@ extern int ZEXPORT zipOpenNewFileInZip3 OF((zipFile file,
                                             int memLevel,
                                             int strategy,
                                             const char* password,
-                                            uLong crcForCtypting));
+                                            uLong crcForCrypting));
+
+extern int ZEXPORT zipOpenNewFileInZip3_64 OF((zipFile file,
+                                            const char* filename,
+                                            const zip_fileinfo* zipfi,
+                                            const void* extrafield_local,
+                                            uInt size_extrafield_local,
+                                            const void* extrafield_global,
+                                            uInt size_extrafield_global,
+                                            const char* comment,
+                                            int method,
+                                            int level,
+                                            int raw,
+                                            int windowBits,
+                                            int memLevel,
+                                            int strategy,
+                                            const char* password,
+                                            uLong crcForCrypting,
+                                            int zip64
+                                            ));
 
 /*
   Same than zipOpenNewFileInZip2, except
     windowBits,memLevel,,strategy : see parameter strategy in deflateInit2
     password : crypting password (NULL for no crypting)
-    crcForCtypting : crc of file to compress (needed for crypting)
+    crcForCrypting : crc of file to compress (needed for crypting)
+ */
+
+extern int ZEXPORT zipOpenNewFileInZip4 OF((zipFile file,
+                                            const char* filename,
+                                            const zip_fileinfo* zipfi,
+                                            const void* extrafield_local,
+                                            uInt size_extrafield_local,
+                                            const void* extrafield_global,
+                                            uInt size_extrafield_global,
+                                            const char* comment,
+                                            int method,
+                                            int level,
+                                            int raw,
+                                            int windowBits,
+                                            int memLevel,
+                                            int strategy,
+                                            const char* password,
+                                            uLong crcForCrypting,
+                                            uLong versionMadeBy,
+                                            uLong flagBase
+                                            ));
+
+
+extern int ZEXPORT zipOpenNewFileInZip4_64 OF((zipFile file,
+                                            const char* filename,
+                                            const zip_fileinfo* zipfi,
+                                            const void* extrafield_local,
+                                            uInt size_extrafield_local,
+                                            const void* extrafield_global,
+                                            uInt size_extrafield_global,
+                                            const char* comment,
+                                            int method,
+                                            int level,
+                                            int raw,
+                                            int windowBits,
+                                            int memLevel,
+                                            int strategy,
+                                            const char* password,
+                                            uLong crcForCrypting,
+                                            uLong versionMadeBy,
+                                            uLong flagBase,
+                                            int zip64
+                                            ));
+/*
+  Same than zipOpenNewFileInZip4, except
+    versionMadeBy : value for Version made by field
+    flag : value for flag field (compression level info will be added)
  */
 
 
@@ -212,12 +316,16 @@ extern int ZEXPORT zipCloseFileInZip OF((zipFile file));
   Close the current file in the zipfile
 */
 
-
 extern int ZEXPORT zipCloseFileInZipRaw OF((zipFile file,
                                             uLong uncompressed_size,
                                             uLong crc32));
+
+extern int ZEXPORT zipCloseFileInZipRaw64 OF((zipFile file,
+                                            ZPOS64_T uncompressed_size,
+                                            uLong crc32));
+
 /*
-  Close the current file in the zipfile, for fiel opened with
+  Close the current file in the zipfile, for file opened with
     parameter raw=1 in zipOpenNewFileInZip2
   uncompressed_size and crc32 are value for the uncompressed size
 */
@@ -228,8 +336,27 @@ extern int ZEXPORT zipClose OF((zipFile file,
   Close the zipfile
 */
 
+
+extern int ZEXPORT zipRemoveExtraInfoBlock OF((char* pData, int* dataLen, short sHeader));
+/*
+  zipRemoveExtraInfoBlock -  Added by Mathias Svensson
+
+  Remove extra information block from a extra information data for the local file header or central directory header
+
+  It is needed to remove ZIP64 extra information blocks when before data is written if using RAW mode.
+
+  0x0001 is the signature header for the ZIP64 extra information blocks
+
+  usage.
+                        Remove ZIP64 Extra information from a central director extra field data
+              zipRemoveExtraInfoBlock(pCenDirExtraFieldData, &nCenDirExtraFieldDataLen, 0x0001);
+
+                        Remove ZIP64 Extra information from a Local File Header extra field data
+        zipRemoveExtraInfoBlock(pLocalHeaderExtraFieldData, &nLocalHeaderExtraFieldDataLen, 0x0001);
+*/
+
 #ifdef __cplusplus
 }
 #endif
 
-#endif /* _zip_H */
+#endif /* _zip64_H */

contrib/pascal/zlibd32.mak

@@ -18,10 +18,10 @@ LDFLAGS =
 # variables
 ZLIB_LIB = zlib.lib
 
-OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infback.obj
+OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj
-OBJ2 = inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
+OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
-OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzio.obj+infback.obj
+OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj
-OBJP2 = +inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj
+OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj
 
 
 # targets
@@ -38,7 +38,13 @@ crc32.obj: crc32.c zlib.h zconf.h crc32.h
 
 deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
 
-gzio.obj: gzio.c zutil.h zlib.h zconf.h
+gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h
+
+gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h
+
+gzread.obj: gzread.c zlib.h zconf.h gzguts.h
+
+gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h
 
 infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
  inffast.h inffixed.h

contrib/pascal/zlibpas.pas

@@ -10,7 +10,7 @@ unit zlibpas;
 interface
 
 const
-  ZLIB_VERSION = '1.2.1';
+  ZLIB_VERSION = '1.2.5';
 
 type
   alloc_func = function(opaque: Pointer; items, size: Integer): Pointer;

contrib/puff/puff.c

@@ -1,8 +1,8 @@
 /*
  * puff.c
- * Copyright (C) 2002, 2003 Mark Adler
+ * Copyright (C) 2002-2010 Mark Adler
  * For conditions of distribution and use, see copyright notice in puff.h
- * version 1.7, 3 Mar 2003
+ * version 2.1, 4 Apr 2010
  *
  * puff.c is a simple inflate written to be an unambiguous way to specify the
  * deflate format.  It is not written for speed but rather simplicity.  As a
@@ -60,6 +60,15 @@
  * 1.6   7 Aug 2002     - Minor format changes
  * 1.7   3 Mar 2003     - Added test code for distribution
  *                      - Added zlib-like license
+ * 1.8   9 Jan 2004     - Added some comments on no distance codes case
+ * 1.9  21 Feb 2008     - Fix bug on 16-bit integer architectures [Pohland]
+ *                      - Catch missing end-of-block symbol error
+ * 2.0  25 Jul 2008     - Add #define to permit distance too far back
+ *                      - Add option in TEST code for puff to write the data
+ *                      - Add option in TEST code to skip input bytes
+ *                      - Allow TEST code to read from piped stdin
+ * 2.1   4 Apr 2010     - Avoid variable initialization for happier compilers
+ *                      - Avoid unsigned comparisons for even happier compilers
  */
 
 #include <setjmp.h>             /* for setjmp(), longjmp(), and jmp_buf */
@@ -193,7 +202,7 @@ struct huffman {
  * Decode a code from the stream s using huffman table h.  Return the symbol or
  * a negative value if there is an error.  If all of the lengths are zero, i.e.
  * an empty code, or if the code is incomplete and an invalid code is received,
- * then -9 is returned after reading MAXBITS bits.
+ * then -10 is returned after reading MAXBITS bits.
  *
  * Format notes:
  *
@@ -225,14 +234,14 @@ local int decode(struct state *s, struct huffman *h)
     for (len = 1; len <= MAXBITS; len++) {
         code |= bits(s, 1);             /* get next bit */
         count = h->count[len];
-        if (code < first + count)       /* if length len, return symbol */
+        if (code - count < first)       /* if length len, return symbol */
             return h->symbol[index + (code - first)];
         index += count;                 /* else update for next length */
         first += count;
         first <<= 1;
         code <<= 1;
     }
-    return -9;                          /* ran out of codes */
+    return -10;                         /* ran out of codes */
 }
 
 /*
@@ -262,7 +271,7 @@ local int decode(struct state *s, struct huffman *h)
             code |= bitbuf & 1;
             bitbuf >>= 1;
             count = *next++;
-            if (code < first + count) { /* if length len, return symbol */
+            if (code - count < first) { /* if length len, return symbol */
                 s->bitbuf = bitbuf;
                 s->bitcnt = (s->bitcnt - len) & 7;
                 return h->symbol[index + (code - first)];
@@ -279,7 +288,7 @@ local int decode(struct state *s, struct huffman *h)
         bitbuf = s->in[s->incnt++];
         if (left > 8) left = 8;
     }
-    return -9;                          /* ran out of codes */
+    return -10;                         /* ran out of codes */
 }
 #endif /* SLOW */
 
@@ -447,21 +456,27 @@ local int codes(struct state *s,
         else if (symbol > 256) {        /* length */
             /* get and compute length */
             symbol -= 257;
-            if (symbol >= 29) return -9;        /* invalid fixed code */
+            if (symbol >= 29) return -10;       /* invalid fixed code */
             len = lens[symbol] + bits(s, lext[symbol]);
 
             /* get and check distance */
             symbol = decode(s, distcode);
             if (symbol < 0) return symbol;      /* invalid symbol */
             dist = dists[symbol] + bits(s, dext[symbol]);
+#ifndef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
             if (dist > s->outcnt)
-                return -10;     /* distance too far back */
+                return -11;     /* distance too far back */
+#endif
 
             /* copy length bytes from distance bytes back */
             if (s->out != NIL) {
                 if (s->outcnt + len > s->outlen) return 1;
                 while (len--) {
-                    s->out[s->outcnt] = s->out[s->outcnt - dist];
+                    s->out[s->outcnt] =
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+                        dist > s->outcnt ? 0 :
+#endif
+                        s->out[s->outcnt - dist];
                     s->outcnt++;
                 }
             }
@@ -503,8 +518,7 @@ local int fixed(struct state *s)
     static int virgin = 1;
     static short lencnt[MAXBITS+1], lensym[FIXLCODES];
     static short distcnt[MAXBITS+1], distsym[MAXDCODES];
-    static struct huffman lencode = {lencnt, lensym};
+    static struct huffman lencode, distcode;
-    static struct huffman distcode = {distcnt, distsym};
 
     /* build fixed huffman tables if first call (may not be thread safe) */
     if (virgin) {
@@ -527,6 +541,12 @@ local int fixed(struct state *s)
             lengths[symbol] = 5;
         construct(&distcode, lengths, MAXDCODES);
 
+        /* construct lencode and distcode */
+        lencode.count = lencnt;
+        lencode.symbol = lensym;
+        distcode.count = distcnt;
+        distcode.symbol = distsym;
+
         /* do this just once */
         virgin = 0;
     }
@@ -577,6 +597,9 @@ local int fixed(struct state *s)
  *   block is fewer bits), but it is allowed by the format.  So incomplete
  *   literal/length codes of one symbol should also be permitted.
  *
+ * - If there are only literal codes and no lengths, then there are no distance
+ *   codes.  This is represented by one distance code with zero bits.
+ *
  * - The list of up to 286 length/literal lengths and up to 30 distance lengths
  *   are themselves compressed using Huffman codes and run-length encoding.  In
  *   the list of code lengths, a 0 symbol means no code, a 1..15 symbol means
@@ -627,11 +650,16 @@ local int dynamic(struct state *s)
     short lengths[MAXCODES];            /* descriptor code lengths */
     short lencnt[MAXBITS+1], lensym[MAXLCODES];         /* lencode memory */
     short distcnt[MAXBITS+1], distsym[MAXDCODES];       /* distcode memory */
-    struct huffman lencode = {lencnt, lensym};          /* length code */
+    struct huffman lencode, distcode;   /* length and distance codes */
-    struct huffman distcode = {distcnt, distsym};       /* distance code */
     static const short order[19] =      /* permutation of code length codes */
         {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
 
+    /* construct lencode and distcode */
+    lencode.count = lencnt;
+    lencode.symbol = lensym;
+    distcode.count = distcnt;
+    distcode.symbol = distsym;
+
     /* get number of lengths in each table, check lengths */
     nlen = bits(s, 5) + 257;
     ndist = bits(s, 5) + 1;
@@ -676,6 +704,10 @@ local int dynamic(struct state *s)
         }
     }
 
+    /* check for end-of-block code -- there better be one! */
+    if (lengths[256] == 0)
+        return -9;
+
     /* build huffman table for literal/length codes */
     err = construct(&lencode, lengths, nlen);
     if (err < 0 || (err > 0 && nlen - lencode.count[0] != 1))
@@ -720,8 +752,9 @@ local int dynamic(struct state *s)
  *  -6:  dynamic block code description: repeat more than specified lengths
  *  -7:  dynamic block code description: invalid literal/length code lengths
  *  -8:  dynamic block code description: invalid distance code lengths
- *  -9:  invalid literal/length or distance code in fixed or dynamic block
+ *  -9:  dynamic block code description: missing end-of-block code
- * -10:  distance is too far back in fixed or dynamic block
+ * -10:  invalid literal/length or distance code in fixed or dynamic block
+ * -11:  distance is too far back in fixed or dynamic block
  *
  * Format notes:
  *
@@ -779,54 +812,143 @@ int puff(unsigned char *dest,           /* pointer to destination pointer */
 }
 
 #ifdef TEST
-/* Example of how to use puff() */
+/* Examples of how to use puff().
+
+   Usage: puff [-w] [-nnn] file
+          ... | puff [-w] [-nnn]
+
+   where file is the input file with deflate data, nnn is the number of bytes
+   of input to skip before inflating (e.g. to skip a zlib or gzip header), and
+   -w is used to write the decompressed data to stdout */
+
 #include <stdio.h>
 #include <stdlib.h>
-#include <sys/types.h>
-#include <sys/stat.h>
 
-local unsigned char *yank(char *name, unsigned long *len)
+/* Return size times approximately the cube root of 2, keeping the result as 1,
+   3, or 5 times a power of 2 -- the result is always > size, until the result
+   is the maximum value of an unsigned long, where it remains.  This is useful
+   to keep reallocations less than ~33% over the actual data. */
+local size_t bythirds(size_t size)
 {
-    unsigned long size;
+    int n;
-    unsigned char *buf;
+    size_t m;
+
+    m = size;
+    for (n = 0; m; n++)
+        m >>= 1;
+    if (n < 3)
+        return size + 1;
+    n -= 3;
+    m = size >> n;
+    m += m == 6 ? 2 : 1;
+    m <<= n;
+    return m > size ? m : (size_t)(-1);
+}
+
+/* Read the input file *name, or stdin if name is NULL, into allocated memory.
+   Reallocate to larger buffers until the entire file is read in.  Return a
+   pointer to the allocated data, or NULL if there was a memory allocation
+   failure.  *len is the number of bytes of data read from the input file (even
+   if load() returns NULL).  If the input file was empty or could not be opened
+   or read, *len is zero. */
+local void *load(char *name, size_t *len)
+{
+    size_t size;
+    void *buf, *swap;
     FILE *in;
-    struct stat s;
 
     *len = 0;
-    if (stat(name, &s)) return NULL;
+    buf = malloc(size = 4096);
-    if ((s.st_mode & S_IFMT) != S_IFREG) return NULL;
+    if (buf == NULL)
-    size = (unsigned long)(s.st_size);
+        return NULL;
-    if (size == 0 || (off_t)size != s.st_size) return NULL;
+    in = name == NULL ? stdin : fopen(name, "rb");
-    in = fopen(name, "r");
+    if (in != NULL) {
-    if (in == NULL) return NULL;
+        for (;;) {
-    buf = malloc(size);
+            *len += fread((char *)buf + *len, 1, size - *len, in);
-    if (buf != NULL && fread(buf, 1, size, in) != size) {
+            if (*len < size) break;
-        free(buf);
+            size = bythirds(size);
-        buf = NULL;
+            if (size == *len || (swap = realloc(buf, size)) == NULL) {
+                free(buf);
+                buf = NULL;
+                break;
+            }
+            buf = swap;
+        }
+        fclose(in);
     }
-    fclose(in);
-    *len = size;
     return buf;
 }
 
 int main(int argc, char **argv)
 {
-    int ret;
+    int ret, put = 0;
-    unsigned char *source;
+    unsigned skip = 0;
-    unsigned long len, sourcelen, destlen;
+    char *arg, *name = NULL;
+    unsigned char *source = NULL, *dest;
+    size_t len = 0;
+    unsigned long sourcelen, destlen;
 
-    if (argc < 2) return 2;
+    /* process arguments */
-    source = yank(argv[1], &len);
+    while (arg = *++argv, --argc)
-    if (source == NULL) return 2;
+        if (arg[0] == '-') {
-    sourcelen = len;
+            if (arg[1] == 'w' && arg[2] == 0)
-    ret = puff(NIL, &destlen, source, &sourcelen);
+                put = 1;
-    if (ret)
+            else if (arg[1] >= '0' && arg[1] <= '9')
-        printf("puff() failed with return code %d\n", ret);
+                skip = (unsigned)atoi(arg + 1);
-    else {
+            else {
-        printf("puff() succeeded uncompressing %lu bytes\n", destlen);
+                fprintf(stderr, "invalid option %s\n", arg);
-        if (sourcelen < len) printf("%lu compressed bytes unused\n",
+                return 3;
-                                    len - sourcelen);
+            }
+        }
+        else if (name != NULL) {
+            fprintf(stderr, "only one file name allowed\n");
+            return 3;
+        }
+        else
+            name = arg;
+    source = load(name, &len);
+    if (source == NULL) {
+        fprintf(stderr, "memory allocation failure\n");
+        return 4;
     }
+    if (len == 0) {
+        fprintf(stderr, "could not read %s, or it was empty\n",
+                name == NULL ? "<stdin>" : name);
+        free(source);
+        return 3;
+    }
+    if (skip >= len) {
+        fprintf(stderr, "skip request of %d leaves no input\n", skip);
+        free(source);
+        return 3;
+    }
+
+    /* test inflate data with offset skip */
+    len -= skip;
+    sourcelen = (unsigned long)len;
+    ret = puff(NIL, &destlen, source + skip, &sourcelen);
+    if (ret)
+        fprintf(stderr, "puff() failed with return code %d\n", ret);
+    else {
+        fprintf(stderr, "puff() succeeded uncompressing %lu bytes\n", destlen);
+        if (sourcelen < len) fprintf(stderr, "%lu compressed bytes unused\n",
+                                     len - sourcelen);
+    }
+
+    /* if requested, inflate again and write decompressd data to stdout */
+    if (put) {
+        dest = malloc(destlen);
+        if (dest == NULL) {
+            fprintf(stderr, "memory allocation failure\n");
+            free(source);
+            return 4;
+        }
+        puff(dest, &destlen, source + skip, &sourcelen);
+        fwrite(dest, 1, destlen, stdout);
+        free(dest);
+    }
+
+    /* clean up */
     free(source);
     return ret;
 }

contrib/puff/puff.h

@@ -1,6 +1,6 @@
 /* puff.h
-  Copyright (C) 2002, 2003 Mark Adler, all rights reserved
+  Copyright (C) 2002-2010 Mark Adler, all rights reserved
-  version 1.7, 3 Mar 2002
+  version 2.1, 4 Apr 2010
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the author be held liable for any damages

contrib/testzlib/testzlib.c

@@ -1,9 +1,121 @@
-
 #include <stdio.h>
 #include <stdlib.h>
 #include <windows.h>
+
 #include "zlib.h"
 
+
+void MyDoMinus64(LARGE_INTEGER *R,LARGE_INTEGER A,LARGE_INTEGER B)
+{
+    R->HighPart = A.HighPart - B.HighPart;
+    if (A.LowPart >= B.LowPart)
+        R->LowPart = A.LowPart - B.LowPart;
+    else
+    {
+        R->LowPart = A.LowPart - B.LowPart;
+        R->HighPart --;
+    }
+}
+
+#ifdef _M_X64
+// see http://msdn2.microsoft.com/library/twchhe95(en-us,vs.80).aspx for __rdtsc
+unsigned __int64 __rdtsc(void);
+void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64)
+{
+ //   printf("rdtsc = %I64x\n",__rdtsc());
+   pbeginTime64->QuadPart=__rdtsc();
+}
+
+LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf)
+{
+    LARGE_INTEGER LIres;
+    unsigned _int64 res=__rdtsc()-((unsigned _int64)(beginTime64.QuadPart));
+    LIres.QuadPart=res;
+   // printf("rdtsc = %I64x\n",__rdtsc());
+    return LIres;
+}
+#else
+#ifdef _M_IX86
+void myGetRDTSC32(LARGE_INTEGER * pbeginTime64)
+{
+    DWORD dwEdx,dwEax;
+    _asm
+    {
+        rdtsc
+        mov dwEax,eax
+        mov dwEdx,edx
+    }
+    pbeginTime64->LowPart=dwEax;
+    pbeginTime64->HighPart=dwEdx;
+}
+
+void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64)
+{
+    myGetRDTSC32(pbeginTime64);
+}
+
+LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf)
+{
+    LARGE_INTEGER LIres,endTime64;
+    myGetRDTSC32(&endTime64);
+
+    LIres.LowPart=LIres.HighPart=0;
+    MyDoMinus64(&LIres,endTime64,beginTime64);
+    return LIres;
+}
+#else
+void myGetRDTSC32(LARGE_INTEGER * pbeginTime64)
+{
+}
+
+void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64)
+{
+}
+
+LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf)
+{
+    LARGE_INTEGER lr;
+    lr.QuadPart=0;
+    return lr;
+}
+#endif
+#endif
+
+void BeginCountPerfCounter(LARGE_INTEGER * pbeginTime64,BOOL fComputeTimeQueryPerf)
+{
+    if ((!fComputeTimeQueryPerf) || (!QueryPerformanceCounter(pbeginTime64)))
+    {
+        pbeginTime64->LowPart = GetTickCount();
+        pbeginTime64->HighPart = 0;
+    }
+}
+
+DWORD GetMsecSincePerfCounter(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf)
+{
+    LARGE_INTEGER endTime64,ticksPerSecond,ticks;
+    DWORDLONG ticksShifted,tickSecShifted;
+    DWORD dwLog=16+0;
+    DWORD dwRet;
+    if ((!fComputeTimeQueryPerf) || (!QueryPerformanceCounter(&endTime64)))
+        dwRet = (GetTickCount() - beginTime64.LowPart)*1;
+    else
+    {
+        MyDoMinus64(&ticks,endTime64,beginTime64);
+        QueryPerformanceFrequency(&ticksPerSecond);
+
+
+        {
+            ticksShifted = Int64ShrlMod32(*(DWORDLONG*)&ticks,dwLog);
+            tickSecShifted = Int64ShrlMod32(*(DWORDLONG*)&ticksPerSecond,dwLog);
+
+        }
+
+        dwRet = (DWORD)((((DWORD)ticksShifted)*1000)/(DWORD)(tickSecShifted));
+        dwRet *=1;
+    }
+    return dwRet;
+}
+
 int ReadFileMemory(const char* filename,long* plFileSize,void** pFilePtr)
 {
     FILE* stream;
@@ -43,7 +155,8 @@ int main(int argc, char *argv[])
     unsigned char* CprPtr;
     unsigned char* UncprPtr;
     long lSizeCpr,lSizeUncpr;
-    DWORD dwGetTick;
+    DWORD dwGetTick,dwMsecQP;
+    LARGE_INTEGER li_qp,li_rdtsc,dwResRdtsc;
 
     if (argc<=1)
     {
@@ -71,9 +184,10 @@ int main(int argc, char *argv[])
     lBufferSizeUncpr = lBufferSizeCpr;
 
     CprPtr=(unsigned char*)malloc(lBufferSizeCpr + BlockSizeCompress);
-    UncprPtr=(unsigned char*)malloc(lBufferSizeUncpr + BlockSizeUncompress);
 
+    BeginCountPerfCounter(&li_qp,TRUE);
     dwGetTick=GetTickCount();
+    BeginCountRdtsc(&li_rdtsc);
     {
         z_stream zcpr;
         int ret=Z_OK;
@@ -101,11 +215,20 @@ int main(int argc, char *argv[])
         lSizeCpr=zcpr.total_out;
         deflateEnd(&zcpr);
         dwGetTick=GetTickCount()-dwGetTick;
+        dwMsecQP=GetMsecSincePerfCounter(li_qp,TRUE);
+        dwResRdtsc=GetResRdtsc(li_rdtsc,TRUE);
         printf("total compress size = %u, in %u step\n",lSizeCpr,step);
-        printf("time = %u msec = %f sec\n\n",dwGetTick,dwGetTick/(double)1000.);
+        printf("time = %u msec = %f sec\n",dwGetTick,dwGetTick/(double)1000.);
+        printf("defcpr time QP = %u msec = %f sec\n",dwMsecQP,dwMsecQP/(double)1000.);
+        printf("defcpr result rdtsc = %I64x\n\n",dwResRdtsc.QuadPart);
     }
 
+    CprPtr=(unsigned char*)realloc(CprPtr,lSizeCpr);
+    UncprPtr=(unsigned char*)malloc(lBufferSizeUncpr + BlockSizeUncompress);
+
+    BeginCountPerfCounter(&li_qp,TRUE);
     dwGetTick=GetTickCount();
+    BeginCountRdtsc(&li_rdtsc);
     {
         z_stream zcpr;
         int ret=Z_OK;
@@ -133,8 +256,12 @@ int main(int argc, char *argv[])
         lSizeUncpr=zcpr.total_out;
         inflateEnd(&zcpr);
         dwGetTick=GetTickCount()-dwGetTick;
+        dwMsecQP=GetMsecSincePerfCounter(li_qp,TRUE);
+        dwResRdtsc=GetResRdtsc(li_rdtsc,TRUE);
         printf("total uncompress size = %u, in %u step\n",lSizeUncpr,step);
-        printf("time = %u msec = %f sec\n\n",dwGetTick,dwGetTick/(double)1000.);
+        printf("time = %u msec = %f sec\n",dwGetTick,dwGetTick/(double)1000.);
+        printf("uncpr  time QP = %u msec = %f sec\n",dwMsecQP,dwMsecQP/(double)1000.);
+        printf("uncpr  result rdtsc = %I64x\n\n",dwResRdtsc.QuadPart);
     }
 
     if (lSizeUncpr==lFileSize)
@@ -145,5 +272,4 @@ int main(int argc, char *argv[])
     }
 
     return 0;
-
 }

contrib/testzlib/testzlib.sln

@@ -1,21 +0,0 @@
-Microsoft Visual Studio Solution File, Format Version 7.00
-Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testzlib", "testzlib.vcproj", "{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}"
-EndProject
-Global
-	GlobalSection(SolutionConfiguration) = preSolution
-		ConfigName.0 = Debug
-		ConfigName.1 = Release
-	EndGlobalSection
-	GlobalSection(ProjectDependencies) = postSolution
-	EndGlobalSection
-	GlobalSection(ProjectConfiguration) = postSolution
-		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug.ActiveCfg = Debug|Win32
-		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug.Build.0 = Debug|Win32
-		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release.ActiveCfg = Release|Win32
-		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release.Build.0 = Release|Win32
-	EndGlobalSection
-	GlobalSection(ExtensibilityGlobals) = postSolution
-	EndGlobalSection
-	GlobalSection(ExtensibilityAddIns) = postSolution
-	EndGlobalSection
-EndGlobal

contrib/testzlib/testzlib.txt

@@ -0,0 +1,10 @@
+To build testzLib with Visual Studio 2005:
+
+copy to a directory file from :
+- root of zLib tree
+- contrib/testzlib
+- contrib/masmx86
+- contrib/masmx64
+- contrib/vstudio/vc7
+
+and open testzlib8.sln

contrib/testzlib/testzlib.vcproj

@@ -1,124 +0,0 @@
-<?xml version="1.0" encoding = "Windows-1252"?>
-<VisualStudioProject
-	ProjectType="Visual C++"
-	Version="7.00"
-	Name="testzlib"
-	ProjectGUID="{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}"
-	Keyword="Win32Proj">
-	<Platforms>
-		<Platform
-			Name="Win32"/>
-	</Platforms>
-	<Configurations>
-		<Configuration
-			Name="Debug|Win32"
-			OutputDirectory="Debug"
-			IntermediateDirectory="Debug"
-			ConfigurationType="1"
-			CharacterSet="2">
-			<Tool
-				Name="VCCLCompilerTool"
-				Optimization="0"
-				PreprocessorDefinitions="WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE"
-				MinimalRebuild="TRUE"
-				BasicRuntimeChecks="3"
-				RuntimeLibrary="5"
-				UsePrecompiledHeader="0"
-				WarningLevel="3"
-				Detect64BitPortabilityProblems="TRUE"
-				DebugInformationFormat="4"/>
-			<Tool
-				Name="VCCustomBuildTool"/>
-			<Tool
-				Name="VCLinkerTool"
-				OutputFile="$(OutDir)/testzlib.exe"
-				LinkIncremental="2"
-				GenerateDebugInformation="TRUE"
-				ProgramDatabaseFile="$(OutDir)/testzlib.pdb"
-				SubSystem="1"
-				TargetMachine="1"/>
-			<Tool
-				Name="VCMIDLTool"/>
-			<Tool
-				Name="VCPostBuildEventTool"/>
-			<Tool
-				Name="VCPreBuildEventTool"/>
-			<Tool
-				Name="VCPreLinkEventTool"/>
-			<Tool
-				Name="VCResourceCompilerTool"/>
-			<Tool
-				Name="VCWebServiceProxyGeneratorTool"/>
-			<Tool
-				Name="VCWebDeploymentTool"/>
-		</Configuration>
-		<Configuration
-			Name="Release|Win32"
-			OutputDirectory="Release"
-			IntermediateDirectory="Release"
-			ConfigurationType="1"
-			CharacterSet="2">
-			<Tool
-				Name="VCCLCompilerTool"
-				Optimization="2"
-				InlineFunctionExpansion="1"
-				OmitFramePointers="TRUE"
-				PreprocessorDefinitions="WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE"
-				StringPooling="TRUE"
-				RuntimeLibrary="4"
-				EnableFunctionLevelLinking="TRUE"
-				UsePrecompiledHeader="0"
-				WarningLevel="3"
-				Detect64BitPortabilityProblems="TRUE"
-				DebugInformationFormat="3"/>
-			<Tool
-				Name="VCCustomBuildTool"/>
-			<Tool
-				Name="VCLinkerTool"
-				OutputFile="$(OutDir)/testzlib.exe"
-				LinkIncremental="1"
-				GenerateDebugInformation="TRUE"
-				SubSystem="1"
-				OptimizeReferences="2"
-				EnableCOMDATFolding="2"
-				OptimizeForWindows98="1"
-				TargetMachine="1"/>
-			<Tool
-				Name="VCMIDLTool"/>
-			<Tool
-				Name="VCPostBuildEventTool"/>
-			<Tool
-				Name="VCPreBuildEventTool"/>
-			<Tool
-				Name="VCPreLinkEventTool"/>
-			<Tool
-				Name="VCResourceCompilerTool"/>
-			<Tool
-				Name="VCWebServiceProxyGeneratorTool"/>
-			<Tool
-				Name="VCWebDeploymentTool"/>
-		</Configuration>
-	</Configurations>
-	<Files>
-		<Filter
-			Name="Source Files"
-			Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm">
-			<File
-				RelativePath="testzlib.c">
-			</File>
-		</Filter>
-		<Filter
-			Name="Header Files"
-			Filter="h;hpp;hxx;hm;inl;inc">
-		</Filter>
-		<Filter
-			Name="Resource Files"
-			Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe">
-		</Filter>
-		<File
-			RelativePath="zlibwapi.lib">
-		</File>
-	</Files>
-	<Globals>
-	</Globals>
-</VisualStudioProject>

contrib/untgz/untgz.c

@@ -1,7 +1,7 @@
 /*
  * untgz.c -- Display contents and extract files from a gzip'd TAR file
  *
- * written by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+ * written by Pedro A. Aranda Gutierrez <paag@tid.es>
  * adaptation to Unix by Jean-loup Gailly <jloup@gzip.org>
  * various fixes by Cosmin Truta <cosmint@cs.ubbcluj.ro>
  */
@@ -15,10 +15,10 @@
 #include "zlib.h"
 
 #ifdef unix
-# include <unistd.h>
+#  include <unistd.h>
 #else
-# include <direct.h>
+#  include <direct.h>
-# include <io.h>
+#  include <io.h>
 #endif
 
 #ifdef WIN32
@@ -28,8 +28,9 @@
 #  endif
 #  define mkdir(dirname,mode)   _mkdir(dirname)
 #  ifdef _MSC_VER
-#    define strdup(str)         _strdup(str)
 #    define access(path,mode)   _access(path,mode)
+#    define chmod(path,mode)    _chmod(path,mode)
+#    define strdup(str)         _strdup(str)
 #  endif
 #else
 #  include <utime.h>
@@ -48,7 +49,21 @@
 #define FIFOTYPE '6'            /* FIFO special */
 #define CONTTYPE '7'            /* reserved */
 
-#define BLOCKSIZE 512
+/* GNU tar extensions */
+
+#define GNUTYPE_DUMPDIR  'D'    /* file names from dumped directory */
+#define GNUTYPE_LONGLINK 'K'    /* long link name */
+#define GNUTYPE_LONGNAME 'L'    /* long file name */
+#define GNUTYPE_MULTIVOL 'M'    /* continuation of file from another volume */
+#define GNUTYPE_NAMES    'N'    /* file name that does not fit into main hdr */
+#define GNUTYPE_SPARSE   'S'    /* sparse file */
+#define GNUTYPE_VOLHDR   'V'    /* tape/volume header */
+
+
+/* tar header */
+
+#define BLOCKSIZE     512
+#define SHORTNAMESIZE 100
 
 struct tar_header
 {                               /* byte offset */
@@ -71,11 +86,20 @@ struct tar_header
                                 /* 500 */
 };
 
-union tar_buffer {
+union tar_buffer
+{
   char               buffer[BLOCKSIZE];
   struct tar_header  header;
 };
 
+struct attr_item
+{
+  struct attr_item  *next;
+  char              *fname;
+  int                mode;
+  time_t             time;
+};
+
 enum { TGZ_EXTRACT, TGZ_LIST, TGZ_INVALID };
 
 char *TGZfname          OF((const char *));
@@ -84,6 +108,9 @@ void TGZnotfound        OF((const char *));
 int getoct              OF((char *, int));
 char *strtime           OF((time_t *));
 int setfiletime         OF((char *, time_t));
+void push_attr          OF((struct attr_item **, char *, int, time_t));
+void restore_attr       OF((struct attr_item **));
+
 int ExprMatch           OF((char *, char *));
 
 int makedir             OF((char *));
@@ -221,7 +248,42 @@ int setfiletime (char *fname,time_t ftime)
 }
 
 
-/* regular expression matching */
+/* push file attributes */
+
+void push_attr(struct attr_item **list,char *fname,int mode,time_t time)
+{
+  struct attr_item *item;
+
+  item = (struct attr_item *)malloc(sizeof(struct attr_item));
+  if (item == NULL)
+    error("Out of memory");
+  item->fname = strdup(fname);
+  item->mode  = mode;
+  item->time  = time;
+  item->next  = *list;
+  *list       = item;
+}
+
+
+/* restore file attributes */
+
+void restore_attr(struct attr_item **list)
+{
+  struct attr_item *item, *prev;
+
+  for (item = *list; item != NULL; )
+    {
+      setfiletime(item->fname,item->time);
+      chmod(item->fname,item->mode);
+      prev = item;
+      item = item->next;
+      free(prev);
+    }
+  *list = NULL;
+}
+
+
+/* match regular expression */
 
 #define ISSPECIAL(c) (((c) == '*') || ((c) == '/'))
 
@@ -332,6 +394,7 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
   char   fname[BLOCKSIZE];
   int    tarmode;
   time_t tartime;
+  struct attr_item *attributes = NULL;
 
   if (action == TGZ_LIST)
     printf("    date      time     size                       file\n"
@@ -354,14 +417,15 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
       /*
        * If we have to get a tar header
        */
-      if (getheader == 1)
+      if (getheader >= 1)
         {
           /*
            * if we met the end of the tar
            * or the end-of-tar block,
            * we are done
            */
-          if ((len == 0) || (buffer.header.name[0] == 0)) break;
+          if (len == 0 || buffer.header.name[0] == 0)
+            break;
 
           tarmode = getoct(buffer.header.mode,8);
           tartime = (time_t)getoct(buffer.header.mtime,12);
@@ -371,8 +435,25 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
               action = TGZ_INVALID;
             }
 
-          strcpy(fname,buffer.header.name);
+          if (getheader == 1)
+            {
+              strncpy(fname,buffer.header.name,SHORTNAMESIZE);
+              if (fname[SHORTNAMESIZE-1] != 0)
+                  fname[SHORTNAMESIZE] = 0;
+            }
+          else
+            {
+              /*
+               * The file name is longer than SHORTNAMESIZE
+               */
+              if (strncmp(fname,buffer.header.name,SHORTNAMESIZE-1) != 0)
+                  error("bad long name");
+              getheader = 1;
+            }
 
+          /*
+           * Act according to the type flag
+           */
           switch (buffer.header.typeflag)
             {
             case DIRTYPE:
@@ -381,7 +462,7 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
               if (action == TGZ_EXTRACT)
                 {
                   makedir(fname);
-                  setfiletime(fname,tartime);
+                  push_attr(&attributes,fname,tarmode,tartime);
                 }
               break;
             case REGTYPE:
@@ -419,6 +500,24 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
                 }
               getheader = 0;
               break;
+            case GNUTYPE_LONGLINK:
+            case GNUTYPE_LONGNAME:
+              remaining = getoct(buffer.header.size,12);
+              if (remaining < 0 || remaining >= BLOCKSIZE)
+                {
+                  action = TGZ_INVALID;
+                  break;
+                }
+              len = gzread(in, fname, BLOCKSIZE);
+              if (len < 0)
+                error(gzerror(in, &err));
+              if (fname[BLOCKSIZE-1] != 0 || (int)strlen(fname) > remaining)
+                {
+                  action = TGZ_INVALID;
+                  break;
+                }
+              getheader = 2;
+              break;
             default:
               if (action == TGZ_LIST)
                 printf(" %s     <---> %s\n",strtime(&tartime),fname);
@@ -433,7 +532,8 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
             {
               if (fwrite(&buffer,sizeof(char),bytes,outfile) != bytes)
                 {
-                  fprintf(stderr,"%s: Error writing %s -- skipping\n",prog,fname);
+                  fprintf(stderr,
+                    "%s: Error writing %s -- skipping\n",prog,fname);
                   fclose(outfile);
                   outfile = NULL;
                   remove(fname);
@@ -450,7 +550,7 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
               fclose(outfile);
               outfile = NULL;
               if (action != TGZ_INVALID)
-                setfiletime(fname,tartime);
+                push_attr(&attributes,fname,tarmode,tartime);
             }
         }
 
@@ -464,6 +564,11 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
         }
     }
 
+  /*
+   * Restore file modes and time stamps
+   */
+  restore_attr(&attributes);
+
   if (gzclose(in) != Z_OK)
     error("failed gzclose");
 
@@ -475,7 +580,7 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
 
 void help(int exitval)
 {
-  printf("untgz version 0.2\n"
+  printf("untgz version 0.2.1\n"
          "  using zlib version %s\n\n",
          zlibVersion());
   printf("Usage: untgz file.tgz            extract all files\n"

contrib/vstudio/readme.txt

@@ -1,8 +1,8 @@
-Building instructions for the DLL versions of Zlib 1.21
+Building instructions for the DLL versions of Zlib 1.2.4
-=======================================================
+========================================================
 
 This directory contains projects that build zlib and minizip using
-Microsoft Visual C++ 7.0/7.1.
+Microsoft Visual C++ 9.0/10.0, and Visual C++ .
 
 You don't need to build these projects yourself. You can download the
 binaries from:
@@ -10,18 +10,23 @@ binaries from:
 
 More information can be found at this site.
 
+first compile assembly code by running
+bld_ml64.bat in contrib\masmx64
+bld_ml32.bat in contrib\masmx86
 
-Build instructions
+
-------------------
+
-- Unzip zlib*.zip and copy the files from contrib\vstudio\vc7,
+
-  from contrib\vstudio\masmx86 and from contrib\minizip into the same
+Build instructions for Visual Studio 2008 (32 bits or 64 bits)
-  directory.
+--------------------------------------------------------------
-- Download the crtdll library from
+- Uncompress current zlib, including all contrib/* files
-    http://www.winimage.com/zLibDll/crtdll.zip
+- Open contrib\vstudio\vc9\zlibvc.sln with Microsoft Visual C++ 2008.0
-  Unzip crtdll.zip to extract crtdll.lib.
+- Or run: vcbuild /rebuild contrib\vstudio\vc9\zlibvc.sln "Release|Win32"
-- If you are using x86, use the Release target.
+
-- Open zlibvc.sln with Microsoft Visual C++ 7.0 or 7.1
+Build instructions for Visual Studio 2010 (32 bits or 64 bits)
-  (Visual Studio .Net 2002 or 2003).
+--------------------------------------------------------------
+- Uncompress current zlib, including all contrib/* files
+- Open contrib\vstudio\vc10\zlibvc.sln with Microsoft Visual C++ 2010.0
 
 
 Important

contrib/vstudio/vc10/miniunz.vcxproj

@@ -0,0 +1,310 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Debug|Itanium">
+      <Configuration>Debug</Configuration>
+      <Platform>Itanium</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|Win32">
+      <Configuration>Debug</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|x64">
+      <Configuration>Debug</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Itanium">
+      <Configuration>Release</Configuration>
+      <Platform>Itanium</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|x64">
+      <Configuration>Release</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{C52F9E7B-498A-42BE-8DB4-85A15694382A}</ProjectGuid>
+    <Keyword>Win32Proj</Keyword>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup>
+    <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\MiniUnzip$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\MiniUnzip$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\MiniUnzip$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\MiniUnzip$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\MiniUnzip$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\MiniUnzip$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">true</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\MiniUnzip$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\MiniUnzip$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\MiniUnzip$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\MiniUnzip$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\MiniUnzip$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\MiniUnzip$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</GenerateManifest>
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MinimalRebuild>true</MinimalRebuild>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>EditAndContinue</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>x86\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)miniunz.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <ProgramDatabaseFile>$(OutDir)miniunz.pdb</ProgramDatabaseFile>
+      <SubSystem>Console</SubSystem>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+      <DataExecutionPrevention>
+      </DataExecutionPrevention>
+      <TargetMachine>MachineX86</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <OmitFramePointers>true</OmitFramePointers>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>x86\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)miniunz.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+      <DataExecutionPrevention>
+      </DataExecutionPrevention>
+      <TargetMachine>MachineX86</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <Midl>
+      <TargetEnvironment>X64</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MinimalRebuild>true</MinimalRebuild>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>x64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)miniunz.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <ProgramDatabaseFile>$(OutDir)miniunz.pdb</ProgramDatabaseFile>
+      <SubSystem>Console</SubSystem>
+      <TargetMachine>MachineX64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">
+    <Midl>
+      <TargetEnvironment>Itanium</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MinimalRebuild>true</MinimalRebuild>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>ia64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)miniunz.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <ProgramDatabaseFile>$(OutDir)miniunz.pdb</ProgramDatabaseFile>
+      <SubSystem>Console</SubSystem>
+      <TargetMachine>MachineIA64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <Midl>
+      <TargetEnvironment>X64</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <OmitFramePointers>true</OmitFramePointers>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>x64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)miniunz.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <TargetMachine>MachineX64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">
+    <Midl>
+      <TargetEnvironment>Itanium</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <OmitFramePointers>true</OmitFramePointers>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>ia64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)miniunz.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <TargetMachine>MachineIA64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClCompile Include="..\..\minizip\miniunz.c" />
+  </ItemGroup>
+  <ItemGroup>
+    <ProjectReference Include="zlibvc.vcxproj">
+      <Project>{8fd826f8-3739-44e6-8cc8-997122e53b8d}</Project>
+    </ProjectReference>
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

contrib/vstudio/vc10/miniunz.vcxproj.filters

@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{048af943-022b-4db6-beeb-a54c34774ee2}</UniqueIdentifier>
+      <Extensions>cpp;c;cxx;def;odl;idl;hpj;bat;asm</Extensions>
+    </Filter>
+    <Filter Include="Header Files">
+      <UniqueIdentifier>{c1d600d2-888f-4aea-b73e-8b0dd9befa0c}</UniqueIdentifier>
+      <Extensions>h;hpp;hxx;hm;inl;inc</Extensions>
+    </Filter>
+    <Filter Include="Resource Files">
+      <UniqueIdentifier>{0844199a-966b-4f19-81db-1e0125e141b9}</UniqueIdentifier>
+      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe</Extensions>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="..\..\minizip\miniunz.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+</Project>

contrib/vstudio/vc10/miniunz.vcxproj.user

@@ -0,0 +1,3 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+</Project>

contrib/vstudio/vc10/minizip.vcxproj

@@ -0,0 +1,307 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Debug|Itanium">
+      <Configuration>Debug</Configuration>
+      <Platform>Itanium</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|Win32">
+      <Configuration>Debug</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|x64">
+      <Configuration>Debug</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Itanium">
+      <Configuration>Release</Configuration>
+      <Platform>Itanium</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|x64">
+      <Configuration>Release</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}</ProjectGuid>
+    <Keyword>Win32Proj</Keyword>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup>
+    <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\MiniZip$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\MiniZip$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\MiniZip$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\MiniZip$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</LinkIncremental>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\$(Configuration)\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">true</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\$(Configuration)\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\$(Configuration)\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</LinkIncremental>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\$(Configuration)\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</LinkIncremental>
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MinimalRebuild>true</MinimalRebuild>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>EditAndContinue</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>x86\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)minizip.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <ProgramDatabaseFile>$(OutDir)minizip.pdb</ProgramDatabaseFile>
+      <SubSystem>Console</SubSystem>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+      <DataExecutionPrevention>
+      </DataExecutionPrevention>
+      <TargetMachine>MachineX86</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <OmitFramePointers>true</OmitFramePointers>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>x86\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)minizip.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+      <DataExecutionPrevention>
+      </DataExecutionPrevention>
+      <TargetMachine>MachineX86</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <Midl>
+      <TargetEnvironment>X64</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MinimalRebuild>true</MinimalRebuild>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>x64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)minizip.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <ProgramDatabaseFile>$(OutDir)minizip.pdb</ProgramDatabaseFile>
+      <SubSystem>Console</SubSystem>
+      <TargetMachine>MachineX64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">
+    <Midl>
+      <TargetEnvironment>Itanium</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MinimalRebuild>true</MinimalRebuild>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>ia64\ZlibDllDebug\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)minizip.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <ProgramDatabaseFile>$(OutDir)minizip.pdb</ProgramDatabaseFile>
+      <SubSystem>Console</SubSystem>
+      <TargetMachine>MachineIA64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <Midl>
+      <TargetEnvironment>X64</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <OmitFramePointers>true</OmitFramePointers>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>x64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)minizip.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <TargetMachine>MachineX64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">
+    <Midl>
+      <TargetEnvironment>Itanium</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <OmitFramePointers>true</OmitFramePointers>
+      <AdditionalIncludeDirectories>..\..\..;..\..\minizip;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>ia64\ZlibDllRelease\zlibwapi.lib;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)minizip.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <TargetMachine>MachineIA64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClCompile Include="..\..\minizip\minizip.c" />
+  </ItemGroup>
+  <ItemGroup>
+    <ProjectReference Include="zlibvc.vcxproj">
+      <Project>{8fd826f8-3739-44e6-8cc8-997122e53b8d}</Project>
+    </ProjectReference>
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

contrib/vstudio/vc10/minizip.vcxproj.filters

@@ -0,0 +1,22 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{c0419b40-bf50-40da-b153-ff74215b79de}</UniqueIdentifier>
+      <Extensions>cpp;c;cxx;def;odl;idl;hpj;bat;asm</Extensions>
+    </Filter>
+    <Filter Include="Header Files">
+      <UniqueIdentifier>{bb87b070-735b-478e-92ce-7383abb2f36c}</UniqueIdentifier>
+      <Extensions>h;hpp;hxx;hm;inl;inc</Extensions>
+    </Filter>
+    <Filter Include="Resource Files">
+      <UniqueIdentifier>{f46ab6a6-548f-43cb-ae96-681abb5bd5db}</UniqueIdentifier>
+      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe</Extensions>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="..\..\minizip\minizip.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+</Project>

contrib/vstudio/vc10/minizip.vcxproj.user

@@ -0,0 +1,3 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+</Project>

contrib/vstudio/vc10/testzlib.vcxproj

@@ -0,0 +1,420 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Debug|Itanium">
+      <Configuration>Debug</Configuration>
+      <Platform>Itanium</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|Win32">
+      <Configuration>Debug</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Debug|x64">
+      <Configuration>Debug</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="ReleaseWithoutAsm|Itanium">
+      <Configuration>ReleaseWithoutAsm</Configuration>
+      <Platform>Itanium</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="ReleaseWithoutAsm|Win32">
+      <Configuration>ReleaseWithoutAsm</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="ReleaseWithoutAsm|x64">
+      <Configuration>ReleaseWithoutAsm</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Itanium">
+      <Configuration>Release</Configuration>
+      <Platform>Itanium</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+    <ProjectConfiguration Include="Release|x64">
+      <Configuration>Release</Configuration>
+      <Platform>x64</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}</ProjectGuid>
+    <RootNamespace>testzlib</RootNamespace>
+    <Keyword>Win32Proj</Keyword>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <CharacterSet>MultiByte</CharacterSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <ImportGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" Label="PropertySheets">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup>
+    <_ProjectFileVersion>10.0.30128.1</_ProjectFileVersion>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\TestZlib$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">x86\TestZlib$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">x86\TestZlib$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">x86\TestZlib$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">false</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\TestZlib$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">x86\TestZlib$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\TestZlib$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">x64\TestZlib$(Configuration)\Tmp\</IntDir>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\TestZlib$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">ia64\TestZlib$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">x64\TestZlib$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">x64\TestZlib$(Configuration)\Tmp\</IntDir>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">ia64\TestZlib$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">ia64\TestZlib$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">false</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\TestZlib$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|x64'">x64\TestZlib$(Configuration)\Tmp\</IntDir>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|x64'">false</GenerateManifest>
+    <OutDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\TestZlib$(Configuration)\</OutDir>
+    <IntDir Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">ia64\TestZlib$(Configuration)\Tmp\</IntDir>
+    <LinkIncremental Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</LinkIncremental>
+    <GenerateManifest Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">false</GenerateManifest>
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Debug|x64'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" />
+    <CodeAnalysisRuleSet Condition="'$(Configuration)|$(Platform)'=='Release|x64'">AllRules.ruleset</CodeAnalysisRuleSet>
+    <CodeAnalysisRules Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+    <CodeAnalysisRuleAssemblies Condition="'$(Configuration)|$(Platform)'=='Release|x64'" />
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>ASMV;ASMINF;WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MinimalRebuild>true</MinimalRebuild>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebug</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerOutput>AssemblyAndSourceCode</AssemblerOutput>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>EditAndContinue</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <ProgramDatabaseFile>$(OutDir)testzlib.pdb</ProgramDatabaseFile>
+      <SubSystem>Console</SubSystem>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+      <DataExecutionPrevention>
+      </DataExecutionPrevention>
+      <TargetMachine>MachineX86</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <OmitFramePointers>true</OmitFramePointers>
+      <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+      <DataExecutionPrevention>
+      </DataExecutionPrevention>
+      <TargetMachine>MachineX86</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <OmitFramePointers>true</OmitFramePointers>
+      <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>ASMV;ASMINF;WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreaded</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>..\..\masmx86\match686.obj;..\..\masmx86\inffas32.obj;%(AdditionalDependencies)</AdditionalDependencies>
+      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <RandomizedBaseAddress>false</RandomizedBaseAddress>
+      <DataExecutionPrevention>
+      </DataExecutionPrevention>
+      <TargetMachine>MachineX86</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
+    <ClCompile>
+      <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>ASMV;ASMINF;WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies)</AdditionalDependencies>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">
+    <Midl>
+      <TargetEnvironment>Itanium</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>Disabled</Optimization>
+      <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <MinimalRebuild>true</MinimalRebuild>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDebugDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerOutput>AssemblyAndSourceCode</AssemblerOutput>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <ProgramDatabaseFile>$(OutDir)testzlib.pdb</ProgramDatabaseFile>
+      <SubSystem>Console</SubSystem>
+      <TargetMachine>MachineIA64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|x64'">
+    <ClCompile>
+      <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>%(AdditionalDependencies)</AdditionalDependencies>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">
+    <Midl>
+      <TargetEnvironment>Itanium</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <OmitFramePointers>true</OmitFramePointers>
+      <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <TargetMachine>MachineIA64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
+    <ClCompile>
+      <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>ASMV;ASMINF;WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+    </ClCompile>
+    <Link>
+      <AdditionalDependencies>..\..\masmx64\gvmat64.obj;..\..\masmx64\inffasx64.obj;%(AdditionalDependencies)</AdditionalDependencies>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">
+    <Midl>
+      <TargetEnvironment>Itanium</TargetEnvironment>
+    </Midl>
+    <ClCompile>
+      <Optimization>MaxSpeed</Optimization>
+      <InlineFunctionExpansion>OnlyExplicitInline</InlineFunctionExpansion>
+      <OmitFramePointers>true</OmitFramePointers>
+      <AdditionalIncludeDirectories>..\..\..;%(AdditionalIncludeDirectories)</AdditionalIncludeDirectories>
+      <PreprocessorDefinitions>ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;_CRT_NONSTDC_NO_WARNINGS;WIN64;%(PreprocessorDefinitions)</PreprocessorDefinitions>
+      <StringPooling>true</StringPooling>
+      <BasicRuntimeChecks>Default</BasicRuntimeChecks>
+      <RuntimeLibrary>MultiThreadedDLL</RuntimeLibrary>
+      <BufferSecurityCheck>false</BufferSecurityCheck>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <PrecompiledHeader>
+      </PrecompiledHeader>
+      <AssemblerListingLocation>$(IntDir)</AssemblerListingLocation>
+      <WarningLevel>Level3</WarningLevel>
+      <DebugInformationFormat>ProgramDatabase</DebugInformationFormat>
+    </ClCompile>
+    <Link>
+      <OutputFile>$(OutDir)testzlib.exe</OutputFile>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <SubSystem>Console</SubSystem>
+      <OptimizeReferences>true</OptimizeReferences>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <TargetMachine>MachineIA64</TargetMachine>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClCompile Include="..\..\..\adler32.c" />
+    <ClCompile Include="..\..\..\compress.c" />
+    <ClCompile Include="..\..\..\crc32.c" />
+    <ClCompile Include="..\..\..\deflate.c" />
+    <ClCompile Include="..\..\..\infback.c" />
+    <ClCompile Include="..\..\masmx64\inffas8664.c">
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|Itanium'">true</ExcludedFromBuild>
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">true</ExcludedFromBuild>
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Itanium'">true</ExcludedFromBuild>
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='ReleaseWithoutAsm|Win32'">true</ExcludedFromBuild>
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release|Itanium'">true</ExcludedFromBuild>
+      <ExcludedFromBuild Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">true</ExcludedFromBuild>
+    </ClCompile>
+    <ClCompile Include="..\..\..\inffast.c" />
+    <ClCompile Include="..\..\..\inflate.c" />
+    <ClCompile Include="..\..\..\inftrees.c" />
+    <ClCompile Include="..\..\testzlib\testzlib.c" />
+    <ClCompile Include="..\..\..\trees.c" />
+    <ClCompile Include="..\..\..\uncompr.c" />
+    <ClCompile Include="..\..\..\zutil.c" />
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>