zlib 1.2.3.1

ChangeLog

@@ -1,6 +1,199 @@
 
                 ChangeLog file for zlib
 
+Changes in 1.2.3.1 (16 August 2006)
+- Add watcom directory with OpenWatcom make files [Daniel]
+- Remove #undef of FAR in zconf.in.h for MVS [Fedtke]
+- Update make_vms.com [Zinser]
+- Use -fPIC for shared build in configure [Teredesai, Nicholson]
+- Use only major version number for libz.so on IRIX and OSF1 [Reinholdtsen]
+- Use fdopen() (not _fdopen()) for Interix in zutil.h [B<>ck]
+- Add some FAQ entries about the contrib directory
+- Update the MVS question in the FAQ
+- Avoid extraneous reads after EOF in gzio.c [Brown]
+- Correct spelling of "successfully" in gzio.c [Randers-Pehrson]
+- Add comments to zlib.h about gzerror() usage [Brown]
+- Set extra flags in gzip header in gzopen() like deflate() does
+- Make configure options more compatible with double-dash conventions
+  [Weigelt]
+- Clean up compilation under Solaris SunStudio cc [Rowe, Reinholdtsen]
+- Fix uninstall target in Makefile.in [Truta]
+- Add pkgconfig support [Weigelt]
+- Use $(DESTDIR) macro in Makefile.in [Reinholdtsen, Weigelt]
+- Replace set_data_type() with a more accurate detect_data_type() in
+  trees.c, according to the txtvsbin.txt document [Truta]
+- Swap the order of #include <stdio.h> and #include "zlib.h" in
+  gzio.c, example.c and minigzip.c [Truta]
+- Shut up annoying VS2005 warnings about standard C deprecation [Rowe,
+  Truta] (where?)
+- Fix target "clean" from win32/Makefile.bor [Truta]
+- Create .pdb and .manifest files in win32/makefile.msc [Ziegler, Rowe]
+- Update zlib www home address in win32/DLL_FAQ.txt [Truta]
+- Update contrib/masmx86/inffas32.asm for VS2005 [Vollant, Van Wassenhove]
+- Enable browse info in the "Debug" and "ASM Debug" configurations in
+  the Visual C++ 6 project, and set (non-ASM) "Debug" as default [Truta]
+- Add pkgconfig support [Weigelt]
+- Add ZLIB_VER_MAJOR, ZLIB_VER_MINOR and ZLIB_VER_REVISION in zlib.h,
+  for use in win32/zlib1.rc [Polushin, Rowe, Truta]
+- Add a document that explains the new text detection scheme to
+  doc/txtvsbin.txt [Truta]
+- Add rfc1950.txt, rfc1951.txt and rfc1952.txt to doc/ [Truta]
+- Move algorithm.txt into doc/ [Truta]
+- Synchronize FAQ with website
+- Fix compressBound(), was low for some pathological cases [Fearnley]
+- Take into account wrapper variations in deflateBound()
+- Set examples/zpipe.c input and output to binary mode for Windows 
+- Update examples/zlib_how.html with new zpipe.c (also web site)
+- Fix some warnings in examples/gzlog.c and examples/zran.c (it seems
+  that gcc became pickier in 4.0)
+- Add zlib.map for Linux: "All symbols from zlib-1.1.4 remain
+  un-versioned, the patch adds versioning only for symbols introduced in
+  zlib-1.2.0 or later.  It also declares as local those symbols which are
+  not designed to be exported." [Levin]
+- Update Z_PREFIX list in zconf.in.h, add --zprefix option to configure
+- Do not initialize global static by default in trees.c, add a response
+  NO_INIT_GLOBAL_POINTERS to initialize them if needed [Marquess]
+- Don't use strerror() in gzio.c under WinCE [Yakimov]
+- Don't use errno.h in zutil.h under WinCE [Yakimov]
+- Move arguments for AR to its usage to allow replacing ar [Marot]
+- Add HAVE_VISIBILITY_PRAGMA in zconf.in.h for Mozilla [Randers-Pehrson]
+- Improve inflateInit() and inflateInit2() documentation
+- Fix structure size comment in inflate.h
+- Change configure help option from --h* to --help [Santos]
+
+Changes in 1.2.3 (18 July 2005)
+- Apply security vulnerability fixes to contrib/infback9 as well
+- Clean up some text files (carriage returns, trailing space)
+- Update testzlib, vstudio, masmx64, and masmx86 in contrib [Vollant]
+
+Changes in 1.2.2.4 (11 July 2005)
+- Add inflatePrime() function for starting inflation at bit boundary
+- Avoid some Visual C warnings in deflate.c
+- Avoid more silly Visual C warnings in inflate.c and inftrees.c for 64-bit
+  compile
+- Fix some spelling errors in comments [Betts]
+- Correct inflateInit2() error return documentation in zlib.h
+- Added zran.c example of compressed data random access to examples
+  directory, shows use of inflatePrime()
+- Fix cast for assignments to strm->state in inflate.c and infback.c
+- Fix zlibCompileFlags() in zutil.c to use 1L for long shifts [Oberhumer]
+- Move declarations of gf2 functions to right place in crc32.c [Oberhumer]
+- Add cast in trees.c t avoid a warning [Oberhumer]
+- Avoid some warnings in fitblk.c, gun.c, gzjoin.c in examples [Oberhumer]
+- Update make_vms.com [Zinser]
+- Initialize state->write in inflateReset() since copied in inflate_fast()
+- Be more strict on incomplete code sets in inflate_table() and increase
+  ENOUGH and MAXD -- this repairs a possible security vulnerability for
+  invalid inflate input.  Thanks to Tavis Ormandy and Markus Oberhumer for
+  discovering the vulnerability and providing test cases.
+- Add ia64 support to configure for HP-UX [Smith]
+- Add error return to gzread() for format or i/o error [Levin]
+- Use malloc.h for OS/2 [Necasek]
+
+Changes in 1.2.2.3 (27 May 2005)
+- Replace 1U constants in inflate.c and inftrees.c for 64-bit compile
+- Typecast fread() return values in gzio.c [Vollant]
+- Remove trailing space in minigzip.c outmode (VC++ can't deal with it)
+- Fix crc check bug in gzread() after gzungetc() [Heiner]
+- Add the deflateTune() function to adjust internal compression parameters
+- Add a fast gzip decompressor, gun.c, to examples (use of inflateBack)
+- Remove an incorrect assertion in examples/zpipe.c
+- Add C++ wrapper in infback9.h [Donais]
+- Fix bug in inflateCopy() when decoding fixed codes
+- Note in zlib.h how much deflateSetDictionary() actually uses
+- Remove USE_DICT_HEAD in deflate.c (would mess up inflate if used)
+- Add _WIN32_WCE to define WIN32 in zconf.in.h [Spencer]
+- Don't include stderr.h or errno.h for _WIN32_WCE in zutil.h [Spencer]
+- Add gzdirect() function to indicate transparent reads
+- Update contrib/minizip [Vollant]
+- Fix compilation of deflate.c when both ASMV and FASTEST [Oberhumer]
+- Add casts in crc32.c to avoid warnings [Oberhumer]
+- Add contrib/masmx64 [Vollant]
+- Update contrib/asm586, asm686, masmx86, testzlib, vstudio [Vollant]
+
+Changes in 1.2.2.2 (30 December 2004)
+- Replace structure assignments in deflate.c and inflate.c with zmemcpy to
+  avoid implicit memcpy calls (portability for no-library compilation)
+- Increase sprintf() buffer size in gzdopen() to allow for large numbers
+- Add INFLATE_STRICT to check distances against zlib header
+- Improve WinCE errno handling and comments [Chang]
+- Remove comment about no gzip header processing in FAQ
+- Add Z_FIXED strategy option to deflateInit2() to force fixed trees
+- Add updated make_vms.com [Coghlan], update README
+- Create a new "examples" directory, move gzappend.c there, add zpipe.c,
+  fitblk.c, gzlog.[ch], gzjoin.c, and zlib_how.html.
+- Add FAQ entry and comments in deflate.c on uninitialized memory access
+- Add Solaris 9 make options in configure [Gilbert]
+- Allow strerror() usage in gzio.c for STDC
+- Fix DecompressBuf in contrib/delphi/ZLib.pas [ManChesTer]
+- Update contrib/masmx86/inffas32.asm and gvmat32.asm [Vollant]
+- Use z_off_t for adler32_combine() and crc32_combine() lengths
+- Make adler32() much faster for small len
+- Use OS_CODE in deflate() default gzip header
+
+Changes in 1.2.2.1 (31 October 2004)
+- Allow inflateSetDictionary() call for raw inflate
+- Fix inflate header crc check bug for file names and comments
+- Add deflateSetHeader() and gz_header structure for custom gzip headers
+- Add inflateGetheader() to retrieve gzip headers
+- Add crc32_combine() and adler32_combine() functions
+- Add alloc_func, free_func, in_func, out_func to Z_PREFIX list
+- Use zstreamp consistently in zlib.h (inflate_back functions)
+- Remove GUNZIP condition from definition of inflate_mode in inflate.h
+  and in contrib/inflate86/inffast.S [Truta, Anderson]
+- Add support for AMD64 in contrib/inflate86/inffas86.c [Anderson]
+- Update projects/README.projects and projects/visualc6 [Truta]
+- Update win32/DLL_FAQ.txt [Truta]
+- Avoid warning under NO_GZCOMPRESS in gzio.c; fix typo [Truta]
+- Deprecate Z_ASCII; use Z_TEXT instead [Truta]
+- Use a new algorithm for setting strm->data_type in trees.c [Truta]
+- Do not define an exit() prototype in zutil.c unless DEBUG defined
+- Remove prototype of exit() from zutil.c, example.c, minigzip.c [Truta]
+- Add comment in zlib.h for Z_NO_FLUSH parameter to deflate()
+- Fix Darwin build version identification [Peterson]
+
+Changes in 1.2.2 (3 October 2004)
+- Update zlib.h comments on gzip in-memory processing
+- Set adler to 1 in inflateReset() to support Java test suite [Walles]
+- Add contrib/dotzlib [Ravn]
+- Update win32/DLL_FAQ.txt [Truta]
+- Update contrib/minizip [Vollant]
+- Move contrib/visual-basic.txt to old/ [Truta]
+- Fix assembler builds in projects/visualc6/ [Truta]
+
+Changes in 1.2.1.2 (9 September 2004)
+- Update INDEX file
+- Fix trees.c to update strm->data_type (no one ever noticed!)
+- Fix bug in error case in inflate.c, infback.c, and infback9.c [Brown]
+- Add "volatile" to crc table flag declaration (for DYNAMIC_CRC_TABLE)
+- Add limited multitasking protection to DYNAMIC_CRC_TABLE
+- Add NO_vsnprintf for VMS in zutil.h [Mozilla]
+- Don't declare strerror() under VMS [Mozilla]
+- Add comment to DYNAMIC_CRC_TABLE to use get_crc_table() to initialize
+- Update contrib/ada [Anisimkov]
+- Update contrib/minizip [Vollant]
+- Fix configure to not hardcode directories for Darwin [Peterson]
+- Fix gzio.c to not return error on empty files [Brown]
+- Fix indentation; update version in contrib/delphi/ZLib.pas and
+  contrib/pascal/zlibpas.pas [Truta]
+- Update mkasm.bat in contrib/masmx86 [Truta]
+- Update contrib/untgz [Truta]
+- Add projects/README.projects [Truta]
+- Add project for MS Visual C++ 6.0 in projects/visualc6 [Cadieux, Truta]
+- Update win32/DLL_FAQ.txt [Truta]
+- Update list of Z_PREFIX symbols in zconf.h [Randers-Pehrson, Truta]
+- Remove an unnecessary assignment to curr in inftrees.c [Truta]
+- Add OS/2 to exe builds in configure [Poltorak]
+- Remove err dummy parameter in zlib.h [Kientzle]
+
+Changes in 1.2.1.1 (9 January 2004)
+- Update email address in README
+- Several FAQ updates
+- Fix a big fat bug in inftrees.c that prevented decoding valid
+  dynamic blocks with only literals and no distance codes --
+  Thanks to "Hot Emu" for the bug report and sample file
+- Add a note to puff.c on no distance codes case.
+
 Changes in 1.2.1 (17 November 2003)
 - Remove a tab in contrib/gzappend/gzappend.c
 - Update some interfaces in contrib for new zlib functions
@@ -407,7 +600,7 @@ Changes in 1.0.7 (20 Jan 1998)
 Changes in 1.0.6 (19 Jan 1998)
 - add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
   gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
-- Fix a deflate bug occuring only with compression level 0 (thanks to
+- Fix a deflate bug occurring only with compression level 0 (thanks to
   Andy Buckler for finding this one).
 - In minigzip, pass transparently also the first byte for .Z files.
 - return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()

FAQ

@@ -21,18 +21,18 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
  3. Where can I get a Visual Basic interface to zlib?
 
     See
-        * http://www.winimage.com/zLibDll/
         * http://www.dogma.net/markn/articles/zlibtool/zlibtool.htm
         * contrib/visual-basic.txt in the zlib distribution
+        * win32/DLL_FAQ.txt in the zlib distribution
 
- 4. compress() returns Z_BUF_ERROR
+ 4. compress() returns Z_BUF_ERROR.
 
     Make sure that before the call of compress, the length of the compressed
     buffer is equal to the total size of the compressed buffer and not
     zero. For Visual Basic, check that this parameter is passed by reference
     ("as any"), not by value ("as long").
 
- 5. deflate() or inflate() returns Z_BUF_ERROR
+ 5. deflate() or inflate() returns Z_BUF_ERROR.
 
     Before making the call, make sure that avail_in and avail_out are not
     zero. When setting the parameter flush equal to Z_FINISH, also make sure
@@ -47,8 +47,8 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
 
     It's in zlib.h for the moment, and Francis S. Lin has converted it to a
     web page zlib.html. Volunteers to transform this to Unix-style man pages,
-    please contact Jean-loup Gailly (jloup@gzip.org). Examples of zlib usage
+    please contact us (zlib@gzip.org). Examples of zlib usage are in the files
-    are in the files example.c and minigzip.c.
+    example.c and minigzip.c.
 
  7. Why don't you use GNU autoconf or libtool or ...?
 
@@ -77,7 +77,8 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
 
 11. Can zlib handle .zip archives?
 
-    See the directory contrib/minizip in the zlib distribution.
+    Not by itself, no. See the directory contrib/minizip in the zlib
+    distribution.
 
 12. Can zlib handle .Z files?
 
@@ -92,6 +93,8 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
 
 14. How do I install a shared zlib library on Unix?
 
+    After the above, then:
+
     make install
 
     However, many flavors of Unix come with a shared zlib already installed.
@@ -99,12 +102,31 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
     trying to install it, you may want to check if it's already there! If you
     can #include <zlib.h>, it's there. The -lz option will probably link to it.
 
-15. I have a question about OttoPDF
+15. I have a question about OttoPDF.
 
     We are not the authors of OttoPDF. The real author is on the OttoPDF web
-    site Joel Hainley jhainley@myndkryme.com.
+    site: Joel Hainley, jhainley@myndkryme.com.
 
-16. Why does gzip give an error on a file I make with compress/deflate?
+16. Can zlib decode Flate data in an Adobe PDF file?
+
+    Yes. See http://www.fastio.com/ (ClibPDF), or http://www.pdflib.com/ .
+    To modify PDF forms, see http://sourceforge.net/projects/acroformtool/ .
+
+17. Why am I getting this "register_frame_info not found" error on Solaris?
+
+    After installing zlib 1.1.4 on Solaris 2.6, running applications using zlib
+    generates an error such as:
+
+        ld.so.1: rpm: fatal: relocation error: file /usr/local/lib/libz.so:
+        symbol __register_frame_info: referenced symbol not found
+
+    The symbol __register_frame_info is not part of zlib, it is generated by
+    the C compiler (cc or gcc). You must recompile applications using zlib
+    which have this problem. This problem is specific to Solaris. See
+    http://www.sunfreeware.com for Solaris versions of zlib and applications
+    using zlib.
+
+18. Why does gzip give an error on a file I make with compress/deflate?
 
     The compress and deflate functions produce data in the zlib format, which
     is different and incompatible with the gzip format. The gz* functions in
@@ -112,7 +134,7 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
     formats use the same compressed data format internally, but have different
     headers and trailers around the compressed data.
 
-17. Ok, so why are there two different formats?
+19. Ok, so why are there two different formats?
 
     The gzip format was designed to retain the directory information about
     a single file, such as the name and last modification date. The zlib
@@ -120,20 +142,13 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
     channel applications, and has a much more compact header and trailer and
     uses a faster integrity check than gzip.
 
-18. Well that's nice, but how do I make a gzip file in memory?
+20. Well that's nice, but how do I make a gzip file in memory?
 
     You can request that deflate write the gzip format instead of the zlib
     format using deflateInit2(). You can also request that inflate decode
     the gzip format using inflateInit2(). Read zlib.h for more details.
 
-    Note that you cannot specify special gzip header contents (e.g. a file
+21. Is zlib thread-safe?
-    name or modification date), nor will inflate tell you what was in the
-    gzip header. If you need to customize the header or see what's in it,
-    you can use the raw deflate and inflate operations and the crc32()
-    function and roll your own gzip encoding and decoding. Read the gzip
-    RFC 1952 for details of the header and trailer format.
-
-19. Is zlib thread-safe?
 
     Yes. However any library routines that zlib uses and any application-
     provided memory allocation routines must also be thread-safe. zlib's gz*
@@ -144,15 +159,15 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
     Of course, you should only operate on any given zlib or gzip stream from a
     single thread at a time.
 
-20. Can I use zlib in my commercial application?
+22. Can I use zlib in my commercial application?
 
     Yes. Please read the license in zlib.h.
 
-21. Is zlib under the GNU license?
+23. Is zlib under the GNU license?
 
     No. Please read the license in zlib.h.
 
-22. The license says that altered source versions must be "plainly marked". So
+24. The license says that altered source versions must be "plainly marked". So
     what exactly do I need to do to meet that requirement?
 
     You need to change the ZLIB_VERSION and ZLIB_VERNUM #defines in zlib.h. In
@@ -175,24 +190,24 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
     ZLIB_VERSION and ZLIB_VERNUM and note the origin and nature of the changes
     in zlib.h as you would for a full source distribution.
 
-23. Will zlib work on a big-endian or little-endian architecture, and can I
+25. Will zlib work on a big-endian or little-endian architecture, and can I
     exchange compressed data between them?
 
     Yes and yes.
 
-24. Will zlib work on a 64-bit machine?
+26. Will zlib work on a 64-bit machine?
 
     It should. It has been tested on 64-bit machines, and has no dependence
     on any data types being limited to 32-bits in length. If you have any
     difficulties, please provide a complete problem report to zlib@gzip.org
 
-25. Will zlib decompress data from the PKWare Data Compression Library?
+27. Will zlib decompress data from the PKWare Data Compression Library?
 
     No. The PKWare DCL uses a completely different compressed data format
     than does PKZIP and zlib. However, you can look in zlib's contrib/blast
     directory for a possible solution to your problem.
 
-26. Can I access data randomly in a compressed stream?
+28. Can I access data randomly in a compressed stream?
 
     No, not without some preparation. If when compressing you periodically
     use Z_FULL_FLUSH, carefully write all the pending data at those points,
@@ -200,27 +215,31 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
     at those points. You have to be careful to not use Z_FULL_FLUSH too
     often, since it can significantly degrade compression.
 
-27. Does zlib work on MVS, OS/390, CICS, etc.?
+29. Does zlib work on MVS, OS/390, CICS, etc.?
 
-    We don't know for sure. We have heard occasional reports of success on
+    Yes, there are working ports of zlib 1.1.4 to MVS which you can find
-    these systems. If you do use it on one of these, please provide us with
+    here:
-    a report, instructions, and patches that we can reference when we get
-    these questions. Thanks.
 
-28. Is there some simpler, easier to read version of inflate I can look at
+    http://www.homerow.net/asm/zlib390.htm
+    http://www.homerow.net/asm/zlibLE.htm
+
+    If these are updated to more recent versions of zlib, please let us
+    know. Thanks.
+
+30. Is there some simpler, easier to read version of inflate I can look at
     to understand the deflate format?
 
     First off, you should read RFC 1951. Second, yes. Look in zlib's
     contrib/puff directory.
 
-29. Does zlib infringe on any patents?
+31. Does zlib infringe on any patents?
 
     As far as we know, no. In fact, that was originally the whole point behind
     zlib. Look here for some more information:
 
     http://www.gzip.org/#faq11
 
-30. Can zlib work with greater than 4 GB of data?
+32. Can zlib work with greater than 4 GB of data?
 
     Yes. inflate() and deflate() will process any amount of data correctly.
     Each call of inflate() or deflate() is limited to input and output chunks
@@ -238,7 +257,7 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
     only if the compiler's "long" type is 32 bits. If the compiler's "long"
     type is 64 bits, then the limit is 16 exabytes.
 
-31. Does zlib have any security vulnerabilities?
+33. Does zlib have any security vulnerabilities?
 
     The only one that we are aware of is potentially in gzprintf(). If zlib
     is compiled to use sprintf() or vsprintf(), then there is no protection
@@ -256,37 +275,48 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
         http://www.ijs.si/software/snprintf/
 
     Note that you should be using the most recent version of zlib. Versions
-    1.1.3 and before were subject to a double-free vulnerability.
+    1.1.3 and before were subject to a double-free vulnerability, and version
+    1.2.1 was subject to an access exception when decompressing invalid
+    compressed data.
 
-32. Is there a Java version of zlib?
+34. Is there a Java version of zlib?
 
     Probably what you want is to use zlib in Java. zlib is already included
     as part of the Java SDK in the java.util.zip package. If you really want
     a version of zlib written in the Java language, look on the zlib home
     page for links: http://www.zlib.org/
 
-33. I get this or that compiler or source-code scanner warning when I crank it
+35. I get this or that compiler or source-code scanner warning when I crank it
-    up to maximally-pendantic. Can't you guys write proper code?
+    up to maximally-pedantic. Can't you guys write proper code?
 
     Many years ago, we gave up attempting to avoid warnings on every compiler
     in the universe. It just got to be a waste of time, and some compilers
     were downright silly. So now, we simply make sure that the code always
     works.
 
-34. Will zlib read the (insert any ancient or arcane format here) compressed
+36. Valgrind (or some similar memory access checker) says that deflate is
+    performing a conditional jump that depends on an uninitialized value.
+    Isn't that a bug?
+
+    No. That is intentional for performance reasons, and the output of
+    deflate is not affected. This only started showing up recently since
+    zlib 1.2.x uses malloc() by default for allocations, whereas earlier
+    versions used calloc(), which zeros out the allocated memory.
+
+37. Will zlib read the (insert any ancient or arcane format here) compressed
     data format?
 
     Probably not. Look in the comp.compression FAQ for pointers to various
     formats and associated software.
 
-35. How can I encrypt/decrypt zip files with zlib?
+38. How can I encrypt/decrypt zip files with zlib?
 
     zlib doesn't support encryption. The original PKZIP encryption is very weak
     and can be broken with freely available programs. To get strong encryption,
-    use gpg ( http://www.gnupg.org/ ) which already includes zlib compression.
+    use GnuPG, http://www.gnupg.org/ , which already includes zlib compression.
     For PKZIP compatible "encryption", look at http://www.info-zip.org/
 
-36. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings?
+39. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings?
 
     "gzip" is the gzip format, and "deflate" is the zlib format. They should
     probably have called the second one "zlib" instead to avoid confusion
@@ -302,14 +332,30 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
 
     Bottom line: use the gzip format for HTTP 1.1 encoding.
 
-37. Does zlib support the new "Deflate64" format introduced by PKWare?
+40. Does zlib support the new "Deflate64" format introduced by PKWare?
 
     No. PKWare has apparently decided to keep that format proprietary, since
     they have not documented it as they have previous compression formats.
     In any case, the compression improvements are so modest compared to other
     more modern approaches, that it's not worth the effort to implement.
 
-38. Can you please sign these lengthy legal documents and fax them back to us
+41. I'm having a problem with the zip functions in zlib, can you help?
+
+    There are no zip functions in zlib. You are probably using minizip by
+    Giles Vollant, which is found in the contrib directory of zlib. It is not
+    part of zlib. In fact none of the stuff in contrib is part of zlib. The
+    files in there are not supported by the zlib authors. You need to contact
+    the authors of the contribution for help.
+
+42. The match.asm code in contrib is under the GNU General Public License.
+    Since it's part of zlib, doesn't that mean that all of zlib falls under the
+    GNU GPL?
+
+    No. The files in contrib are not part of zlib. They were contributed by
+    other authors and are provided as a convenience to the user within the zlib
+    distribution. Each of the items in contrib have their own license.
+
+43. Can you please sign these lengthy legal documents and fax them back to us
     so that we can use your software in our product?
 
     No. Go away. Shoo.

INDEX

@@ -4,17 +4,26 @@ INDEX           this file
 Makefile        makefile for Unix (generated by configure)
 Makefile.in     makefile for Unix (template for configure)
 README          guess what
-algorithm.txt   description of the (de)compression algorithm
 configure       configure script for Unix
+make_vms.com	makefile for VMS
 zconf.in.h      template for zconf.h (used by configure)
+zlib.3		Man page for zlib
+zlib.map	Linux symbol information
+zlib.pc.in	??
 
+amiga/          makefiles for Amiga SAS C
+as400/          makefiles for IBM AS/400
+doc/		documentation for formats and algorithms
 msdos/          makefiles for MSDOS
 old/            makefiles for various architectures and zlib documentation
                 files that have not yet been updated for zlib 1.2.x
+projects/       projects for various Integrated Development Environments
 qnx/            makefiles for QNX
+todo/		works in progress
+watcom/		makefiles for OpenWatcom
 win32/          makefiles for Windows
 
-                zlib public header files (must be kept):
+                zlib public header files (required for library use):
 zconf.h
 zlib.h
 
@@ -43,6 +52,7 @@ zutil.h
                 source files for sample programs:
 example.c
 minigzip.c
+See examples/README.examples for more
 
                 unsupported contribution by third parties
 See contrib/README.contrib

Makefile

@@ -1,5 +1,5 @@
 # Makefile for zlib
-# Copyright (C) 1995-2003 Jean-loup Gailly.
+# Copyright (C) 1995-2006 Jean-loup Gailly.
 # For conditions of distribution and use, see copyright notice in zlib.h
 
 # To compile and test, type:
@@ -30,10 +30,10 @@ CPP=$(CC) -E
 
 LIBS=libz.a
 SHAREDLIB=libz.so
-SHAREDLIBV=libz.so.1.2.1
+SHAREDLIBV=libz.so.1.2.3.1
 SHAREDLIBM=libz.so.1
 
-AR=ar rc
+AR=ar
 RANLIB=ranlib
 TAR=tar
 SHELL=/bin/sh
@@ -45,6 +45,7 @@ libdir = ${exec_prefix}/lib
 includedir = ${prefix}/include
 mandir = ${prefix}/share/man
 man3dir = ${mandir}/man3
+pkgconfigdir = ${libdir}/pkgconfig
 
 OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
        zutil.o inflate.o infback.o inftrees.o inffast.o
@@ -90,33 +91,37 @@ minigzip$(EXE): minigzip.o $(LIBS)
 	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
 
 install: $(LIBS)
-	-@if [ ! -d $(exec_prefix) ]; then mkdir -p $(exec_prefix); fi
+	-@if [ ! -d $(DESTDIR)$(exec_prefix)  ]; then mkdir -p $(DESTDIR)$(exec_prefix); fi
-	-@if [ ! -d $(includedir)  ]; then mkdir -p $(includedir); fi
+	-@if [ ! -d $(DESTDIR)$(includedir)   ]; then mkdir -p $(DESTDIR)$(includedir); fi
-	-@if [ ! -d $(libdir)      ]; then mkdir -p $(libdir); fi
+	-@if [ ! -d $(DESTDIR)$(libdir)       ]; then mkdir -p $(DESTDIR)$(libdir); fi
-	-@if [ ! -d $(man3dir)     ]; then mkdir -p $(man3dir); fi
+	-@if [ ! -d $(DESTDIR)$(man3dir)      ]; then mkdir -p $(DESTDIR)$(man3dir); fi
-	cp zlib.h zconf.h $(includedir)
+	-@if [ ! -d $(DESTDIR)$(pkgconfigdir) ]; then mkdir -p $(DESTDIR)$(pkgconfigdir); fi
-	chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h
+	cp zlib.h zconf.h $(DESTDIR)$(includedir)
-	cp $(LIBS) $(libdir)
+	chmod 644 $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h
-	cd $(libdir); chmod 755 $(LIBS)
+	cp $(LIBS) $(DESTDIR)$(libdir)
-	-@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
+	cd $(DESTDIR)$(libdir); chmod 755 $(LIBS)
-	cd $(libdir); if test -f $(SHAREDLIBV); then \
+	-@(cd $(DESTDIR)$(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
+	cd $(DESTDIR)$(libdir); if test -f $(SHAREDLIBV); then \
 	  rm -f $(SHAREDLIB) $(SHAREDLIBM); \
 	  ln -s $(SHAREDLIBV) $(SHAREDLIB); \
 	  ln -s $(SHAREDLIBV) $(SHAREDLIBM); \
 	  (ldconfig || true)  >/dev/null 2>&1; \
 	fi
-	cp zlib.3 $(man3dir)
+	cp zlib.3 $(DESTDIR)$(man3dir)
-	chmod 644 $(man3dir)/zlib.3
+	chmod 644 $(DESTDIR)$(man3dir)/zlib.3
+	cp zlib.pc $(DESTDIR)$(pkgconfigdir)
+	chmod 644 $(DESTDIR)$(pkgconfigdir)/zlib.pc
 # The ranlib in install is needed on NeXTSTEP which checks file times
 # ldconfig is for Linux
 
 uninstall:
-	cd $(includedir); \
+	cd $(DESTDIR)$(includedir); rm -f zlib.h zconf.h
-	cd $(libdir); rm -f libz.a; \
+	cd $(DESTDIR)$(libdir); rm -f libz.a; \
 	if test -f $(SHAREDLIBV); then \
 	  rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \
 	fi
-	cd $(man3dir); rm -f zlib.3
+	cd $(DESTDIR)$(man3dir); rm -f zlib.3
+	cd $(DESTDIR)$(pkgconfigdir); rm -f zlib.pc
 
 mostlyclean: clean
 clean:
@@ -128,7 +133,7 @@ maintainer-clean: distclean
 distclean: clean
 	cp -p Makefile.in Makefile
 	cp -p zconf.in.h zconf.h
-	rm -f .DS_Store
+	rm -f zlib.pc .DS_Store
 
 tags:
 	etags *.[ch]

Makefile.in

@@ -1,5 +1,5 @@
 # Makefile for zlib
-# Copyright (C) 1995-2003 Jean-loup Gailly.
+# Copyright (C) 1995-2006 Jean-loup Gailly.
 # For conditions of distribution and use, see copyright notice in zlib.h
 
 # To compile and test, type:
@@ -30,10 +30,10 @@ CPP=$(CC) -E
 
 LIBS=libz.a
 SHAREDLIB=libz.so
-SHAREDLIBV=libz.so.1.2.1
+SHAREDLIBV=libz.so.1.2.3.1
 SHAREDLIBM=libz.so.1
 
-AR=ar rc
+AR=ar
 RANLIB=ranlib
 TAR=tar
 SHELL=/bin/sh
@@ -45,6 +45,7 @@ libdir = ${exec_prefix}/lib
 includedir = ${prefix}/include
 mandir = ${prefix}/share/man
 man3dir = ${mandir}/man3
+pkgconfigdir = ${libdir}/pkgconfig
 
 OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
        zutil.o inflate.o infback.o inftrees.o inffast.o
@@ -90,33 +91,37 @@ minigzip$(EXE): minigzip.o $(LIBS)
 	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
 
 install: $(LIBS)
-	-@if [ ! -d $(exec_prefix) ]; then mkdir -p $(exec_prefix); fi
+	-@if [ ! -d $(DESTDIR)$(exec_prefix)  ]; then mkdir -p $(DESTDIR)$(exec_prefix); fi
-	-@if [ ! -d $(includedir)  ]; then mkdir -p $(includedir); fi
+	-@if [ ! -d $(DESTDIR)$(includedir)   ]; then mkdir -p $(DESTDIR)$(includedir); fi
-	-@if [ ! -d $(libdir)      ]; then mkdir -p $(libdir); fi
+	-@if [ ! -d $(DESTDIR)$(libdir)       ]; then mkdir -p $(DESTDIR)$(libdir); fi
-	-@if [ ! -d $(man3dir)     ]; then mkdir -p $(man3dir); fi
+	-@if [ ! -d $(DESTDIR)$(man3dir)      ]; then mkdir -p $(DESTDIR)$(man3dir); fi
-	cp zlib.h zconf.h $(includedir)
+	-@if [ ! -d $(DESTDIR)$(pkgconfigdir) ]; then mkdir -p $(DESTDIR)$(pkgconfigdir); fi
-	chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h
+	cp zlib.h zconf.h $(DESTDIR)$(includedir)
-	cp $(LIBS) $(libdir)
+	chmod 644 $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h
-	cd $(libdir); chmod 755 $(LIBS)
+	cp $(LIBS) $(DESTDIR)$(libdir)
-	-@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
+	cd $(DESTDIR)$(libdir); chmod 755 $(LIBS)
-	cd $(libdir); if test -f $(SHAREDLIBV); then \
+	-@(cd $(DESTDIR)$(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
+	cd $(DESTDIR)$(libdir); if test -f $(SHAREDLIBV); then \
 	  rm -f $(SHAREDLIB) $(SHAREDLIBM); \
 	  ln -s $(SHAREDLIBV) $(SHAREDLIB); \
 	  ln -s $(SHAREDLIBV) $(SHAREDLIBM); \
 	  (ldconfig || true)  >/dev/null 2>&1; \
 	fi
-	cp zlib.3 $(man3dir)
+	cp zlib.3 $(DESTDIR)$(man3dir)
-	chmod 644 $(man3dir)/zlib.3
+	chmod 644 $(DESTDIR)$(man3dir)/zlib.3
+	cp zlib.pc $(DESTDIR)$(pkgconfigdir)
+	chmod 644 $(DESTDIR)$(pkgconfigdir)/zlib.pc
 # The ranlib in install is needed on NeXTSTEP which checks file times
 # ldconfig is for Linux
 
 uninstall:
-	cd $(includedir); \
+	cd $(DESTDIR)$(includedir); rm -f zlib.h zconf.h
-	cd $(libdir); rm -f libz.a; \
+	cd $(DESTDIR)$(libdir); rm -f libz.a; \
 	if test -f $(SHAREDLIBV); then \
 	  rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \
 	fi
-	cd $(man3dir); rm -f zlib.3
+	cd $(DESTDIR)$(man3dir); rm -f zlib.3
+	cd $(DESTDIR)$(pkgconfigdir); rm -f zlib.pc
 
 mostlyclean: clean
 clean:
@@ -128,7 +133,7 @@ maintainer-clean: distclean
 distclean: clean
 	cp -p Makefile.in Makefile
 	cp -p zconf.in.h zconf.h
-	rm -f .DS_Store
+	rm -f zlib.pc .DS_Store
 
 tags:
 	etags *.[ch]

README

@@ -1,6 +1,6 @@
 ZLIB DATA COMPRESSION LIBRARY
 
-zlib 1.2.1 is a general purpose data compression library.  All the code is
+zlib 1.2.3.1 is a general purpose data compression library.  All the code is
 thread safe.  The data format used by the zlib library is described by RFCs
 (Request for Comments) 1950 to 1952 in the files
 http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
@@ -16,9 +16,8 @@ minigzip.c.
 
 To compile all files and run the test program, follow the instructions given at
 the top of Makefile. In short "make test; make install" should work for most
-machines. For Unix: "./configure; make test; make install" For MSDOS, use one
+machines. For Unix: "./configure; make test; make install". For MSDOS, use one
-of the special makefiles such as Makefile.msc. For VMS, use Make_vms.com or
+of the special makefiles such as Makefile.msc. For VMS, use make_vms.com.
-descrip.mms.
 
 Questions about zlib should be sent to <zlib@gzip.org>, or to Gilles Vollant
 <info@winimage.com> for the Windows DLL version. The zlib home page is
@@ -34,7 +33,7 @@ Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan. 1997
 issue of  Dr. Dobb's Journal; a copy of the article is available in
 http://dogma.net/markn/articles/zlibtool/zlibtool.htm
 
-The changes made in version 1.2.1 are documented in the file ChangeLog.
+The changes made in version 1.2.3.1 are documented in the file ChangeLog.
 
 Unsupported third party contributions are provided in directory "contrib".
 
@@ -46,7 +45,7 @@ A Perl interface to zlib written by Paul Marquess <pmqs@cpan.org> is in the
 CPAN (Comprehensive Perl Archive Network) sites
 http://www.cpan.org/modules/by-module/Compress/
 
-A Python interface to zlib written by A.M. Kuchling <amk@magnet.com> is
+A Python interface to zlib written by A.M. Kuchling <amk@amk.ca> is
 available in Python 1.5 and later versions, see
 http://www.python.org/doc/lib/module-zlib.html
 
@@ -93,7 +92,7 @@ Acknowledgments:
 
 Copyright notice:
 
- (C) 1995-2003 Jean-loup Gailly and Mark Adler
+ (C) 1995-2004 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages

adler32.c

@@ -1,5 +1,5 @@
 /* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2004 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -12,12 +12,13 @@
 #define NMAX 5552
 /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
 
-#define DO1(buf,i)  {s1 += buf[i]; s2 += s1;}
+#define DO1(buf,i)  {adler += (buf)[i]; sum2 += adler;}
 #define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
 #define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
 #define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
 #define DO16(buf)   DO8(buf,0); DO8(buf,8);
 
+/* use NO_DIVIDE if your processor does not do division in hardware */
 #ifdef NO_DIVIDE
 #  define MOD(a) \
     do { \
@@ -39,8 +40,17 @@
         if (a >= (BASE << 1)) a -= (BASE << 1); \
         if (a >= BASE) a -= BASE; \
     } while (0)
+#  define MOD4(a) \
+    do { \
+        if (a >= (BASE << 4)) a -= (BASE << 4); \
+        if (a >= (BASE << 3)) a -= (BASE << 3); \
+        if (a >= (BASE << 2)) a -= (BASE << 2); \
+        if (a >= (BASE << 1)) a -= (BASE << 1); \
+        if (a >= BASE) a -= BASE; \
+    } while (0)
 #else
 #  define MOD(a) a %= BASE
+#  define MOD4(a) a %= BASE
 #endif
 
 /* ========================================================================= */
@@ -49,26 +59,91 @@ uLong ZEXPORT adler32(adler, buf, len)
     const Bytef *buf;
     uInt len;
 {
-    unsigned long s1 = adler & 0xffff;
+    unsigned long sum2;
-    unsigned long s2 = (adler >> 16) & 0xffff;
+    unsigned n;
-    int k;
 
-    if (buf == Z_NULL) return 1L;
+    /* split Adler-32 into component sums */
+    sum2 = (adler >> 16) & 0xffff;
+    adler &= 0xffff;
 
-    while (len > 0) {
+    /* in case user likes doing a byte at a time, keep it fast */
-        k = len < NMAX ? (int)len : NMAX;
+    if (len == 1) {
-        len -= k;
+        adler += buf[0];
-        while (k >= 16) {
+        if (adler >= BASE)
+            adler -= BASE;
+        sum2 += adler;
+        if (sum2 >= BASE)
+            sum2 -= BASE;
+        return adler | (sum2 << 16);
+    }
+
+    /* initial Adler-32 value (deferred check for len == 1 speed) */
+    if (buf == Z_NULL)
+        return 1L;
+
+    /* in case short lengths are provided, keep it somewhat fast */
+    if (len < 16) {
+        while (len--) {
+            adler += *buf++;
+            sum2 += adler;
+        }
+        if (adler >= BASE)
+            adler -= BASE;
+        MOD4(sum2);             /* only added so many BASE's */
+        return adler | (sum2 << 16);
+    }
+
+    /* do length NMAX blocks -- requires just one modulo operation */
+    while (len >= NMAX) {
+        len -= NMAX;
+        n = NMAX / 16;          /* NMAX is divisible by 16 */
+        do {
+            DO16(buf);          /* 16 sums unrolled */
+            buf += 16;
+        } while (--n);
+        MOD(adler);
+        MOD(sum2);
+    }
+
+    /* do remaining bytes (less than NMAX, still just one modulo) */
+    if (len) {                  /* avoid modulos if none remaining */
+        while (len >= 16) {
+            len -= 16;
             DO16(buf);
             buf += 16;
-            k -= 16;
         }
-        if (k != 0) do {
+        while (len--) {
-            s1 += *buf++;
+            adler += *buf++;
-            s2 += s1;
+            sum2 += adler;
-        } while (--k);
-        MOD(s1);
-        MOD(s2);
         }
-    return (s2 << 16) | s1;
+        MOD(adler);
+        MOD(sum2);
+    }
+
+    /* return recombined sums */
+    return adler | (sum2 << 16);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT adler32_combine(adler1, adler2, len2)
+    uLong adler1;
+    uLong adler2;
+    z_off_t len2;
+{
+    unsigned long sum1;
+    unsigned long sum2;
+    unsigned rem;
+
+    /* the derivation of this formula is left as an exercise for the reader */
+    rem = (unsigned)(len2 % BASE);
+    sum1 = adler1 & 0xffff;
+    sum2 = rem * sum1;
+    MOD(sum2);
+    sum1 += (adler2 & 0xffff) + BASE - 1;
+    sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
+    if (sum1 > BASE) sum1 -= BASE;
+    if (sum1 > BASE) sum1 -= BASE;
+    if (sum2 > (BASE << 1)) sum2 -= (BASE << 1);
+    if (sum2 > BASE) sum2 -= BASE;
+    return sum1 | (sum2 << 16);
 }

as400/compile.clp

@@ -118,6 +118,6 @@
                                  &MODLIB/INFTREES    &MODLIB/TREES       +
                                  &MODLIB/UNCOMPR     &MODLIB/ZUTIL)      +
                           SRCFILE(&SRCLIB/&CTLFILE) SRCMBR(BNDSRC) +
-                          TEXT('ZLIB 1.2.1') TGTRLS(V4R4M0)
+                          TEXT('ZLIB 1.2.3') TGTRLS(V4R4M0)
 
              ENDPGM

as400/readme.txt

@@ -1,4 +1,4 @@
-        ZLIB version 1.2.1 for AS400 installation instructions
+        ZLIB version 1.2.3 for AS400 installation instructions
 
 I) From an AS400 *SAVF file:
 

as400/zlib.inc

@@ -1,7 +1,7 @@
       *  ZLIB.INC - Interface to the general purpose compression library
       *
       *  ILE RPG400 version by Patrick Monnerat, DATASPHERE.
-      *  Version 1.2.1
+      *  Version 1.2.3.1
       *
       *
       *  WARNING:
@@ -20,8 +20,12 @@
       *                               Constants
       **************************************************************************
       *
-     D ZLIB_VERSION    C                   '1.2.1'                            Header's version
+      *  Versioning information.
-     D ZLIB_VERNUM     C                   X'1210'
+      *
+     D ZLIB_VERSION    C                   '1.2.3.1'
+     D ZLIB_VERNUM     C                   X'1231'
+      *
+      *  Other equates.
       *
      D Z_NO_FLUSH      C                   0
      D Z_SYNC_FLUSH    C                   2

compress.c

@@ -1,5 +1,5 @@
 /* compress.c -- compress a memory buffer
- * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -75,5 +75,6 @@ int ZEXPORT compress (dest, destLen, source, sourceLen)
 uLong ZEXPORT compressBound (sourceLen)
     uLong sourceLen;
 {
-    return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) + 11;
+    return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
+           (sourceLen >> 25) + 13;
 }

configure

@@ -23,7 +23,8 @@ LDFLAGS="-L. ${LIBS}"
 VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`
 VER2=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\)\\..*/\1/p' < zlib.h`
 VER1=`sed -n -e '/VERSION "/s/.*"\([0-9]*\)\\..*/\1/p' < zlib.h`
-AR=${AR-"ar rc"}
+AR=${AR-"ar"}
+AR_RC="${AR} rc"
 RANLIB=${RANLIB-"ranlib"}
 prefix=${prefix-/usr/local}
 exec_prefix=${exec_prefix-'${prefix}'}
@@ -32,6 +33,7 @@ includedir=${includedir-'${prefix}/include'}
 mandir=${mandir-'${prefix}/share/man'}
 shared_ext='.so'
 shared=0
+zprefix=0
 gcc=0
 old_cc="$CC"
 old_cflags="$CFLAGS"
@@ -39,20 +41,23 @@ old_cflags="$CFLAGS"
 while test $# -ge 1
 do
 case "$1" in
-    -h* | --h*)
+    -h* | --help)
       echo 'usage:'
       echo '  configure [--shared] [--prefix=PREFIX]  [--exec_prefix=EXPREFIX]'
-      echo '     [--libdir=LIBDIR] [--includedir=INCLUDEDIR]'
+      echo '     [--libdir=LIBDIR] [--includedir=INCLUDEDIR] [--zprefix]'
         exit 0;;
-    -p*=* | --p*=*) prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
+    -p*=* | --prefix=*) prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
-    -e*=* | --e*=*) exec_prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
+    -e*=* | --eprefix=*) exec_prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
     -l*=* | --libdir=*) libdir=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
     -i*=* | --includedir=*) includedir=`echo $1 | sed 's/[-a-z_]*=//'`;shift;;
-    -p* | --p*) prefix="$2"; shift; shift;;
+    -p* | --prefix) prefix="$2"; shift; shift;;
-    -e* | --e*) exec_prefix="$2"; shift; shift;;
+    -e* | --eprefix) exec_prefix="$2"; shift; shift;;
-    -l* | --l*) libdir="$2"; shift; shift;;
+    -l* | --libdir) libdir="$2"; shift; shift;;
-    -i* | --i*) includedir="$2"; shift; shift;;
+    -i* | --includedir) includedir="$2"; shift; shift;;
-    -s* | --s*) shared=1; shift;;
+    -s* | --shared | --enable-shared) shared=1; shift;;
+    -z* | --zprefix) zprefix=1; shift;;
+    --sysconfdir=*) echo "ignored option: --sysconfdir"; shift;;
+    --localstatedir=*) echo "ignored option: --localstatedir"; shift;;
     *) echo "unknown option: $1"; echo "$0 --help for help"; exit 1;;
     esac
 done
@@ -73,25 +78,30 @@ esac
 
 if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
   CC="$cc"
-  SFLAGS=${CFLAGS-"-fPIC -O3"}
+  SFLAGS="${CFLAGS-"-O3"} -fPIC"
   CFLAGS="$cflags"
   case `(uname -s || echo unknown) 2>/dev/null` in
-  Linux | linux | GNU | GNU/*) LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1"};;
+  Linux | linux | GNU | GNU/*) LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map"};;
-  CYGWIN* | Cygwin* | cygwin* )
+  CYGWIN* | Cygwin* | cygwin* | OS/2* )
              EXE='.exe';;
   QNX*)  # This is for QNX6. I suppose that the QNX rule below is for QNX2,QNX4
          # (alain.bonnefoy@icbt.com)
                  LDSHARED=${LDSHARED-"$cc -shared -Wl,-hlibz.so.1"};;
-  HP-UX*)        LDSHARED=${LDSHARED-"$cc -shared $SFLAGS"}
+  HP-UX*)
+         LDSHARED=${LDSHARED-"$cc -shared $SFLAGS"}
+         case `(uname -m || echo unknown) 2>/dev/null` in
+         ia64)
+                 shared_ext='.so'
+                 SHAREDLIB='libz.so';;
+         *)
                  shared_ext='.sl'
                  SHAREDLIB='libz.sl';;
+         esac;;
   Darwin*)   shared_ext='.dylib'
              SHAREDLIB=libz$shared_ext
              SHAREDLIBV=libz.$VER$shared_ext
              SHAREDLIBM=libz.$VER1$shared_ext
-             LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name /usr/lib/$SHAREDLIBV -compatibility_version $VER2 -current_version $VER"}
+             LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER"};;
-             libdir='/usr/lib'
-             includedir='/usr/include';;
   *)             LDSHARED=${LDSHARED-"$cc -shared"};;
   esac
 else
@@ -102,31 +112,46 @@ else
              CFLAGS=${CFLAGS-"-O"}
 #            LDSHARED=${LDSHARED-"ld -b +vnocompatwarnings"}
              LDSHARED=${LDSHARED-"ld -b"}
+         case `(uname -m || echo unknown) 2>/dev/null` in
+         ia64)
+             shared_ext='.so'
+             SHAREDLIB='libz.so';;
+         *)
              shared_ext='.sl'
              SHAREDLIB='libz.sl';;
+         esac;;
   IRIX*)     SFLAGS=${CFLAGS-"-ansi -O2 -rpath ."}
              CFLAGS=${CFLAGS-"-ansi -O2"}
-             LDSHARED=${LDSHARED-"cc -shared"};;
+             LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so.1"};;
   OSF1\ V4*) SFLAGS=${CFLAGS-"-O -std1"}
              CFLAGS=${CFLAGS-"-O -std1"}
              LDSHARED=${LDSHARED-"cc -shared  -Wl,-soname,libz.so -Wl,-msym -Wl,-rpath,$(libdir) -Wl,-set_version,${VER}:1.0"};;
   OSF1*)     SFLAGS=${CFLAGS-"-O -std1"}
              CFLAGS=${CFLAGS-"-O -std1"}
-             LDSHARED=${LDSHARED-"cc -shared"};;
+             LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so.1"};;
   QNX*)      SFLAGS=${CFLAGS-"-4 -O"}
              CFLAGS=${CFLAGS-"-4 -O"}
              LDSHARED=${LDSHARED-"cc"}
              RANLIB=${RANLIB-"true"}
-             AR="cc -A";;
+             AR_RC="cc -A";;
   SCO_SV\ 3.2*) SFLAGS=${CFLAGS-"-O3 -dy -KPIC "}
              CFLAGS=${CFLAGS-"-O3"}
              LDSHARED=${LDSHARED-"cc -dy -KPIC -G"};;
-  SunOS\ 5*) SFLAGS=${CFLAGS-"-fast -xcg89 -KPIC -R."}
+  SunOS\ 5*) LDSHARED=${LDSHARED-"cc -G"}
-             CFLAGS=${CFLAGS-"-fast -xcg89"}
+         case `(uname -m || echo unknown) 2>/dev/null` in
-             LDSHARED=${LDSHARED-"cc -G"};;
+         i86*)
+             SFLAGS=${CFLAGS-"-xpentium -fast -KPIC -R."}
+             CFLAGS=${CFLAGS-"-xpentium -fast"};;
+         *)
+             SFLAGS=${CFLAGS-"-fast -xcg92 -KPIC -R."}
+             CFLAGS=${CFLAGS-"-fast -xcg92"};;
+         esac;;
   SunOS\ 4*) SFLAGS=${CFLAGS-"-O2 -PIC"}
              CFLAGS=${CFLAGS-"-O2"}
              LDSHARED=${LDSHARED-"ld"};;
+  SunStudio\ 9*) SFLAGS=${CFLAGS-"-DUSE_MMAP -fast -xcode=pic32 -xtarget=ultra3 -xarch=v9b"}
+             CFLAGS=${CFLAGS-"-DUSE_MMAP -fast -xtarget=ultra3 -xarch=v9b"}
+             LDSHARED=${LDSHARED-"cc -xarch=v9b"};;
   UNIX_System_V\ 4.2.0)
              SFLAGS=${CFLAGS-"-KPIC -O"}
              CFLAGS=${CFLAGS-"-O"}
@@ -166,6 +191,10 @@ if test $shared -eq 1; then
     echo No shared library support.
     shared=0;
   else
+    echo Tested $CC -c $SFLAGS $test.c
+    $CC -c $SFLAGS $test.c
+    echo Tested $LDSHARED -o $test$shared_ext $test.o
+    $LDSHARED -o $test$shared_ext $test.o
     echo 'No shared library support; try without defining CC and CFLAGS'
     shared=0;
   fi
@@ -189,6 +218,12 @@ else
   echo "Checking for unistd.h... No."
 fi
 
+if test $zprefix -eq 1; then
+  sed < zconf.h "/#ifdef Z_PREFIX/s/def Z_PREFIX/ 1/" > zconf.temp.h
+  mv zconf.temp.h zconf.h
+  echo "Using z_ prefix on all symbols."
+fi
+
 cat > $test.c <<EOF
 #include <stdio.h>
 #include <stdarg.h>
@@ -205,7 +240,7 @@ int main()
 EOF
 
 if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
-  echo "Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf()"
+  echo "Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf()."
 
   cat > $test.c <<EOF
 #include <stdio.h>
@@ -302,7 +337,7 @@ EOF
     fi
   fi
 else
-  echo "Checking whether to use vs[n]printf() or s[n]printf()... using s[n]printf()"
+  echo "Checking whether to use vs[n]printf() or s[n]printf()... using s[n]printf()."
 
   cat >$test.c <<EOF
 #include <stdio.h>
@@ -433,7 +468,7 @@ sed < Makefile.in "
 /^SHAREDLIB *=/s#=.*#=$SHAREDLIB#
 /^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV#
 /^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM#
-/^AR *=/s#=.*#=$AR#
+/^AR *=/s#=.*#=$AR_RC#
 /^RANLIB *=/s#=.*#=$RANLIB#
 /^EXE *=/s#=.*#=$EXE#
 /^prefix *=/s#=.*#=$prefix#
@@ -443,3 +478,25 @@ sed < Makefile.in "
 /^mandir *=/s#=.*#=$mandir#
 /^LDFLAGS *=/s#=.*#=$LDFLAGS#
 " > Makefile
+
+sed < zlib.pc.in "
+/^CC *=/s#=.*#=$CC#
+/^CFLAGS *=/s#=.*#=$CFLAGS#
+/^CPP *=/s#=.*#=$CPP#
+/^LDSHARED *=/s#=.*#=$LDSHARED#
+/^LIBS *=/s#=.*#=$LIBS#
+/^SHAREDLIB *=/s#=.*#=$SHAREDLIB#
+/^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV#
+/^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM#
+/^AR *=/s#=.*#=$AR_RC#
+/^RANLIB *=/s#=.*#=$RANLIB#
+/^EXE *=/s#=.*#=$EXE#
+/^prefix *=/s#=.*#=$prefix#
+/^exec_prefix *=/s#=.*#=$exec_prefix#
+/^libdir *=/s#=.*#=$libdir#
+/^includedir *=/s#=.*#=$includedir#
+/^mandir *=/s#=.*#=$mandir#
+/^LDFLAGS *=/s#=.*#=$LDFLAGS#
+" | sed -e "
+s/\@VERSION\@/$VER/g;
+" > zlib.pc

contrib/README.contrib

@@ -19,8 +19,8 @@ blast/      by Mark Adler <madler@alumni.caltech.edu>
 delphi/     by Cosmin Truta <cosmint@cs.ubbcluj.ro>
         Support for Delphi and C++ Builder
 
-gzappend/   by Mark Adler <madler@alumni.caltech.edu>
+dotzlib/    by Henrik Ravn <henrik@ravn.com>
-        append to a gzip file -- illustrates the use of Z_BLOCK
+        Support for Microsoft .Net and Visual C++ .Net
 
 infback9/   by Mark Adler <madler@alumni.caltech.edu>
         Unsupported diffs to infback to decode the deflate64 format
@@ -42,6 +42,10 @@ masm686/    by Dan Higdon <hdan@kinesoft.com>
             and Chuck Walbourn <chuckw@kinesoft.com>
         asm code for Pentium Pro/PII, using the MASM syntax
 
+masmx64/    by Gilles Vollant <info@winimage.com>
+	x86 64-bit (AMD64 and Intel EM64t) code for x64 assembler to
+	replace longest_match() and inflate_fast()
+
 masmx86/    by Gilles Vollant <info@winimage.com>
         x86 asm code to replace longest_match() and inflate_fast(),
         for Visual C++ and MASM
@@ -60,11 +64,8 @@ puff/       by Mark Adler <madler@alumni.caltech.edu>
 testzlib/   by Gilles Vollant <info@winimage.com>
         Example of the use of zlib
 
-untgz/      by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+untgz/      by Pedro A. Aranda Gutierrez <paag@tid.es>
         A very simple tar.gz file extractor using zlib
 
-visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
-        How to use compress(), uncompress() and the gz* functions from VB
-
 vstudio/    by Gilles Vollant <info@winimage.com>
-        Building zlib with Visual Studio .NET
+        Building a minizip-enhanced zlib with Microsoft Visual Studio

contrib/ada/buffer_demo.adb

@@ -0,0 +1,106 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2004 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+--
+--  $Id: buffer_demo.adb,v 1.3 2004/09/06 06:55:35 vagul Exp $
+
+--  This demo program provided by Dr Steve Sangwine <sjs@essex.ac.uk>
+--
+--  Demonstration of a problem with Zlib-Ada (already fixed) when a buffer
+--  of exactly the correct size is used for decompressed data, and the last
+--  few bytes passed in to Zlib are checksum bytes.
+
+--  This program compresses a string of text, and then decompresses the
+--  compressed text into a buffer of the same size as the original text.
+
+with Ada.Streams; use Ada.Streams;
+with Ada.Text_IO;
+
+with ZLib; use ZLib;
+
+procedure Buffer_Demo is
+   EOL  : Character renames ASCII.LF;
+   Text : constant String
+     := "Four score and seven years ago our fathers brought forth," & EOL &
+        "upon this continent, a new nation, conceived in liberty," & EOL &
+        "and dedicated to the proposition that `all men are created equal'.";
+
+   Source : Stream_Element_Array (1 .. Text'Length);
+   for Source'Address use Text'Address;
+
+begin
+   Ada.Text_IO.Put (Text);
+   Ada.Text_IO.New_Line;
+   Ada.Text_IO.Put_Line
+     ("Uncompressed size : " & Positive'Image (Text'Length) & " bytes");
+
+   declare
+      Compressed_Data : Stream_Element_Array (1 .. Text'Length);
+      L               : Stream_Element_Offset;
+   begin
+      Compress : declare
+         Compressor : Filter_Type;
+         I : Stream_Element_Offset;
+      begin
+         Deflate_Init (Compressor);
+
+         --  Compress the whole of T at once.
+
+         Translate (Compressor, Source, I, Compressed_Data, L, Finish);
+         pragma Assert (I = Source'Last);
+
+         Close (Compressor);
+
+         Ada.Text_IO.Put_Line
+           ("Compressed size :   "
+            & Stream_Element_Offset'Image (L) & " bytes");
+      end Compress;
+
+      --  Now we decompress the data, passing short blocks of data to Zlib
+      --  (because this demonstrates the problem - the last block passed will
+      --  contain checksum information and there will be no output, only a
+      --  check inside Zlib that the checksum is correct).
+
+      Decompress : declare
+         Decompressor : Filter_Type;
+
+         Uncompressed_Data : Stream_Element_Array (1 .. Text'Length);
+
+         Block_Size : constant := 4;
+         --  This makes sure that the last block contains
+         --  only Adler checksum data.
+
+         P : Stream_Element_Offset := Compressed_Data'First - 1;
+         O : Stream_Element_Offset;
+      begin
+         Inflate_Init (Decompressor);
+
+         loop
+            Translate
+              (Decompressor,
+               Compressed_Data
+                 (P + 1 .. Stream_Element_Offset'Min (P + Block_Size, L)),
+               P,
+               Uncompressed_Data
+                 (Total_Out (Decompressor) + 1 .. Uncompressed_Data'Last),
+               O,
+               No_Flush);
+
+               Ada.Text_IO.Put_Line
+                 ("Total in : " & Count'Image (Total_In (Decompressor)) &
+                  ", out : " & Count'Image (Total_Out (Decompressor)));
+
+               exit when P = L;
+         end loop;
+
+         Ada.Text_IO.New_Line;
+         Ada.Text_IO.Put_Line
+           ("Decompressed text matches original text : "
+             & Boolean'Image (Uncompressed_Data = Source));
+      end Decompress;
+   end;
+end Buffer_Demo;

contrib/ada/mtest.adb

@@ -5,10 +5,10 @@
 --                                                            --
 --  Open source license information is in the zlib.ads file.  --
 ----------------------------------------------------------------
---  Continuous test for ZLib multithreading. If the test is fail
+--  Continuous test for ZLib multithreading. If the test would fail
---  Wou should provide thread safe allocation routines for the Z_Stream.
+--  we should provide thread safe allocation routines for the Z_Stream.
 --
---  $Id: mtest.adb,v 1.2 2003/08/12 12:11:05 vagul Exp $
+--  $Id: mtest.adb,v 1.4 2004/07/23 07:49:54 vagul Exp $
 
 with ZLib;
 with Ada.Streams;
@@ -148,6 +148,9 @@ procedure MTest is
 
    pragma Unreferenced (Test);
 
+   Dummy : Character;
+
 begin
-   null;
+   Ada.Text_IO.Get_Immediate (Dummy);
+   Stop := True;
 end MTest;

contrib/ada/read.adb

@@ -6,7 +6,7 @@
 --  Open source license information is in the zlib.ads file.  --
 ----------------------------------------------------------------
 
---  $Id: read.adb,v 1.7 2003/08/12 12:12:35 vagul Exp $
+--  $Id: read.adb,v 1.8 2004/05/31 10:53:40 vagul Exp $
 
 --  Test/demo program for the generic read interface.
 
@@ -68,7 +68,11 @@ procedure Read is
    --  ZLib.Read
    --  reading data from the File_In.
 
-   procedure Read is new ZLib.Read (Read, Read_Buffer, Read_First, Read_Last);
+   procedure Read is new ZLib.Read
+                           (Read,
+                            Read_Buffer,
+                            Rest_First => Read_First,
+                            Rest_Last  => Read_Last);
 
    ----------
    -- Read --
@@ -103,6 +107,7 @@ procedure Read is
       Pack_Size := 0;
       Offset := 1;
       Read_First := Read_Buffer'Last + 1;
+      Read_Last  := Read_Buffer'Last;
    end Reset;
 
 begin

contrib/ada/readme.txt

@@ -1,20 +1,31 @@
-
                         ZLib for Ada thick binding (ZLib.Ada)
-			Release 1.2
+                        Release 1.3
 
 ZLib.Ada is a thick binding interface to the popular ZLib data
 compression library, available at http://www.gzip.org/zlib/.
 It provides Ada-style access to the ZLib C library.
 
 
-	Here are the main changes since ZLib.Ada 1.1:
+        Here are the main changes since ZLib.Ada 1.2:
 
-- The default header type has a name "Default" now. Auto is used only for
+- Attension: ZLib.Read generic routine have a initialization requirement
-  automatic GZip/ZLib header detection.
+  for Read_Last parameter now. It is a bit incompartible with previous version,
+  but extends functionality, we could use new parameters Allow_Read_Some and
+  Flush now.
 
-- Added test for multitasking mtest.adb.
+- Added Is_Open routines to ZLib and ZLib.Streams packages.
 
-- Added GNAT project file zlib.gpr.
+- Add pragma Assert to check Stream_Element is 8 bit.
+
+- Fix extraction to buffer with exact known decompressed size. Error reported by
+  Steve Sangwine.
+
+- Fix definition of ULong (changed to unsigned_long), fix regression on 64 bits
+  computers. Patch provided by Pascal Obry.
+
+- Add Status_Error exception definition.
+
+- Add pragma Assertion that Ada.Streams.Stream_Element size is 8 bit.
 
 
         How to build ZLib.Ada under GNAT
@@ -50,3 +61,5 @@ The routines from the package specifications are commented.
 
 Homepage: http://zlib-ada.sourceforge.net/
 Author: Dmitriy Anisimkov <anisimkov@yahoo.com>
+
+Contributors: Pascal Obry <pascal@obry.org>, Steve Sangwine <sjs@essex.ac.uk>

contrib/ada/zlib-streams.adb

@@ -6,7 +6,7 @@
 --  Open source license information is in the zlib.ads file.  --
 ----------------------------------------------------------------
 
---  $Id: zlib-streams.adb,v 1.9 2003/08/12 13:15:31 vagul Exp $
+--  $Id: zlib-streams.adb,v 1.10 2004/05/31 10:53:40 vagul Exp $
 
 with Ada.Unchecked_Deallocation;
 
@@ -90,6 +90,7 @@ package body ZLib.Streams is
 
          Stream.Buffer     := new Buffer_Subtype;
          Stream.Rest_First := Stream.Buffer'Last + 1;
+         Stream.Rest_Last  := Stream.Buffer'Last;
       end if;
    end Create;
 
@@ -113,6 +114,15 @@ package body ZLib.Streams is
       end loop;
    end Flush;
 
+   -------------
+   -- Is_Open --
+   -------------
+
+   function Is_Open (Stream : Stream_Type) return Boolean is
+   begin
+      return Is_Open (Stream.Reader) or else Is_Open (Stream.Writer);
+   end Is_Open;
+
    ----------
    -- Read --
    ----------

contrib/ada/zlib-streams.ads

@@ -6,7 +6,7 @@
 --  Open source license information is in the zlib.ads file.  --
 ----------------------------------------------------------------
 
---  $Id: zlib-streams.ads,v 1.11 2003/08/12 13:15:31 vagul Exp $
+--  $Id: zlib-streams.ads,v 1.12 2004/05/31 10:53:40 vagul Exp $
 
 package ZLib.Streams is
 
@@ -77,6 +77,8 @@ package ZLib.Streams is
    --  !!! When the Need_Header is False ZLib-Ada is using undocumented
    --  ZLib 1.1.4 functionality to do not create/wait for ZLib headers.
 
+   function Is_Open (Stream : Stream_Type) return Boolean;
+
    procedure Close (Stream : in out Stream_Type);
 
 private

contrib/ada/zlib-thin.adb

@@ -6,12 +6,11 @@
 --  Open source license information is in the zlib.ads file.  --
 ----------------------------------------------------------------
 
---  $Id: zlib-thin.adb,v 1.6 2003/01/21 15:26:37 vagul Exp $
+--  $Id: zlib-thin.adb,v 1.8 2003/12/14 18:27:31 vagul Exp $
 
 package body ZLib.Thin is
 
-   ZLIB_VERSION : constant Chars_Ptr :=
+   ZLIB_VERSION  : constant Chars_Ptr := zlibVersion;
-      Interfaces.C.Strings.New_String ("1.1.4");
 
    Z_Stream_Size : constant Int := Z_Stream'Size / System.Storage_Unit;
 
@@ -37,14 +36,6 @@ package body ZLib.Thin is
    -- Deflate_Init --
    ------------------
 
-   function Deflate_Init
-     (strm  : in Z_Streamp;
-      level : in Int := Z_DEFAULT_COMPRESSION)
-      return  Int is
-   begin
-      return deflateInit (strm, level, ZLIB_VERSION, Z_Stream_Size);
-   end Deflate_Init;
-
    function Deflate_Init
      (strm       : Z_Streamp;
       level      : Int;
@@ -69,16 +60,15 @@ package body ZLib.Thin is
    -- Inflate_Init --
    ------------------
 
-   function Inflate_Init (strm : Z_Streamp) return Int is
-   begin
-      return inflateInit (strm, ZLIB_VERSION, Z_Stream_Size);
-   end Inflate_Init;
-
    function Inflate_Init (strm : Z_Streamp; windowBits : Int) return Int is
    begin
       return inflateInit2 (strm, windowBits, ZLIB_VERSION, Z_Stream_Size);
    end Inflate_Init;
 
+   ------------------------
+   -- Last_Error_Message --
+   ------------------------
+
    function Last_Error_Message (Strm : in Z_Stream) return String is
       use Interfaces.C.Strings;
    begin
@@ -89,45 +79,19 @@ package body ZLib.Thin is
       end if;
    end Last_Error_Message;
 
-   -------------
-   -- Need_In --
-   -------------
-
-   function Need_In (strm : Z_Stream) return Boolean is
-   begin
-      return strm.Avail_In = 0;
-   end Need_In;
-
-   --------------
-   -- Need_Out --
-   --------------
-
-   function Need_Out (strm : Z_Stream) return Boolean is
-   begin
-      return strm.Avail_Out = 0;
-   end Need_Out;
-
    ------------
    -- Set_In --
    ------------
 
    procedure Set_In
      (Strm   : in out Z_Stream;
-      Buffer : in Byte_Access;
+      Buffer : in     Voidp;
       Size   : in     UInt) is
    begin
       Strm.Next_In  := Buffer;
       Strm.Avail_In := Size;
    end Set_In;
 
-   procedure Set_In
-     (Strm   : in out Z_Stream;
-      Buffer : in Voidp;
-      Size   : in UInt) is
-   begin
-      Set_In (Strm, Bytes.To_Pointer (Buffer), Size);
-   end Set_In;
-
    ------------------
    -- Set_Mem_Func --
    ------------------
@@ -149,21 +113,13 @@ package body ZLib.Thin is
 
    procedure Set_Out
      (Strm   : in out Z_Stream;
-      Buffer : in Byte_Access;
+      Buffer : in     Voidp;
       Size   : in     UInt) is
    begin
       Strm.Next_Out  := Buffer;
       Strm.Avail_Out := Size;
    end Set_Out;
 
-   procedure Set_Out
-     (Strm   : in out Z_Stream;
-      Buffer : in Voidp;
-      Size   : in UInt) is
-   begin
-      Set_Out (Strm, Bytes.To_Pointer (Buffer), Size);
-   end Set_Out;
-
    --------------
    -- Total_In --
    --------------

contrib/ada/zlib-thin.ads

@@ -6,10 +6,11 @@
 --  Open source license information is in the zlib.ads file.  --
 ----------------------------------------------------------------
 
---  $Id: zlib-thin.ads,v 1.8 2003/08/12 13:16:51 vagul Exp $
+--  $Id: zlib-thin.ads,v 1.11 2004/07/23 06:33:11 vagul Exp $
 
 with Interfaces.C.Strings;
-with System.Address_To_Access_Conversions;
+
+with System;
 
 private package ZLib.Thin is
 
@@ -36,18 +37,18 @@ private package ZLib.Thin is
                                                 --  zconf.h:216
    type Int is new Interfaces.C.int;
 
-   type ULong is new Interfaces.C.unsigned;     --  32 bits or more
+   type ULong is new Interfaces.C.unsigned_long;     --  32 bits or more
                                                      --  zconf.h:217
    subtype Chars_Ptr is Interfaces.C.Strings.chars_ptr;
 
    type ULong_Access is access ULong;
    type Int_Access is access Int;
+
    subtype Voidp is System.Address;            --  zconf.h:232
 
-   package Bytes is new System.Address_To_Access_Conversions (Byte);
+   subtype Byte_Access is Voidp;
-
-   subtype Byte_Access is Bytes.Object_Pointer;
 
+   Nul : constant Voidp := System.Null_Address;
    --  end from zconf
 
    Z_NO_FLUSH : constant := 8#0000#;   --  zlib.h:125
@@ -251,12 +252,6 @@ private package ZLib.Thin is
       stream_size : Int)
       return        Int;
 
-   function Deflate_Init
-     (strm  : in Z_Streamp;
-      level : in Int := Z_DEFAULT_COMPRESSION)
-      return  Int;
-   pragma Inline (Deflate_Init);
-
    function deflateInit2
      (strm        : Z_Streamp;
       level       : Int;
@@ -284,9 +279,6 @@ private package ZLib.Thin is
       stream_size : Int)
       return        Int;
 
-   function Inflate_Init (strm : Z_Streamp) return Int;
-   pragma Inline (Inflate_Init);
-
    function inflateInit2
      (strm        : in Z_Streamp;
       windowBits  : in Int;
@@ -318,32 +310,12 @@ private package ZLib.Thin is
    --  has dropped to zero. The application must initialize zalloc, zfree and
    --  opaque before calling the init function.
 
-   function Need_In (strm : in Z_Stream) return Boolean;
-   --  return true when we do not need to setup Next_In and Avail_In fields.
-   pragma Inline (Need_In);
-
-   function Need_Out (strm : in Z_Stream) return Boolean;
-   --  return true when we do not need to setup Next_Out and Avail_Out field.
-   pragma Inline (Need_Out);
-
-   procedure Set_In
-     (Strm   : in out Z_Stream;
-      Buffer : in Byte_Access;
-      Size   : in UInt);
-   pragma Inline (Set_In);
-
    procedure Set_In
      (Strm   : in out Z_Stream;
       Buffer : in Voidp;
       Size   : in UInt);
    pragma Inline (Set_In);
 
-   procedure Set_Out
-     (Strm   : in out Z_Stream;
-      Buffer : in Byte_Access;
-      Size   : in UInt);
-   pragma Inline (Set_Out);
-
    procedure Set_Out
      (Strm   : in out Z_Stream;
       Buffer : in Voidp;
@@ -388,19 +360,13 @@ private package ZLib.Thin is
 
    function zlibCompileFlags return ULong;
 
-   function deflatePrime
-     (strm     : Z_Streamp;
-      bits     : Int;
-      value    : Int)
-      return     Int;
-
 private
 
    type Z_Stream is record            -- zlib.h:68
-      Next_In   : Byte_Access;        -- next input byte
+      Next_In   : Voidp      := Nul;  -- next input byte
       Avail_In  : UInt       := 0;    -- number of bytes available at next_in
       Total_In  : ULong      := 0;    -- total nb of input bytes read so far
-      Next_Out  : Byte_Access;        -- next output byte should be put there
+      Next_Out  : Voidp      := Nul;  -- next output byte should be put there
       Avail_Out : UInt       := 0;    -- remaining free space at next_out
       Total_Out : ULong      := 0;    -- total nb of bytes output so far
       msg       : Chars_Ptr;          -- last error message, NULL if no error
@@ -460,14 +426,13 @@ private
    pragma Import (C, inflateSyncPoint, "inflateSyncPoint");
    pragma Import (C, get_crc_table, "get_crc_table");
 
-   --  added in zlib 1.2.1:
+   --  since zlib 1.2.0:
 
    pragma Import (C, inflateCopy, "inflateCopy");
    pragma Import (C, compressBound, "compressBound");
    pragma Import (C, deflateBound, "deflateBound");
    pragma Import (C, gzungetc, "gzungetc");
    pragma Import (C, zlibCompileFlags, "zlibCompileFlags");
-   pragma Import (C, deflatePrime, "deflatePrime");
 
    pragma Import (C, inflateBackInit, "inflateBackInit_");
 

contrib/ada/zlib.adb

@@ -1,12 +1,12 @@
 ----------------------------------------------------------------
 --  ZLib for Ada thick binding.                               --
 --                                                            --
---  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
+--  Copyright (C) 2002-2004 Dmitriy Anisimkov                 --
 --                                                            --
 --  Open source license information is in the zlib.ads file.  --
 ----------------------------------------------------------------
 
---  $Id: zlib.adb,v 1.19 2003/07/13 16:02:19 vagul Exp $
+--  $Id: zlib.adb,v 1.31 2004/09/06 06:53:19 vagul Exp $
 
 with Ada.Exceptions;
 with Ada.Unchecked_Conversion;
@@ -34,7 +34,7 @@ package body ZLib is
        VERSION_ERROR);
 
    type Flate_Step_Function is access
-     function (Strm : Thin.Z_Streamp; flush : Thin.Int) return Thin.Int;
+     function (Strm : in Thin.Z_Streamp; Flush : in Thin.Int) return Thin.Int;
    pragma Convention (C, Flate_Step_Function);
 
    type Flate_End_Function is access
@@ -82,13 +82,13 @@ package body ZLib is
    Flush_Finish : constant array (Boolean) of Flush_Mode
      := (True => Finish, False => No_Flush);
 
-   procedure Raise_Error (Stream : Z_Stream);
+   procedure Raise_Error (Stream : in Z_Stream);
    pragma Inline (Raise_Error);
 
-   procedure Raise_Error (Message : String);
+   procedure Raise_Error (Message : in String);
    pragma Inline (Raise_Error);
 
-   procedure Check_Error (Stream : Z_Stream; Code : Thin.Int);
+   procedure Check_Error (Stream : in Z_Stream; Code : in Thin.Int);
 
    procedure Free is new Ada.Unchecked_Deallocation
       (Z_Stream, Z_Stream_Access);
@@ -118,7 +118,7 @@ package body ZLib is
    -- Check_Error --
    -----------------
 
-   procedure Check_Error (Stream : Z_Stream; Code : Thin.Int) is
+   procedure Check_Error (Stream : in Z_Stream; Code : in Thin.Int) is
       use type Thin.Int;
    begin
       if Code /= Thin.Z_OK then
@@ -138,10 +138,11 @@ package body ZLib is
    is
       Code : Thin.Int;
    begin
-      Code := Flate (Filter.Compression).Done
+      if not Ignore_Error and then not Is_Open (Filter) then
-          (To_Thin_Access (Filter.Strm));
+         raise Status_Error;
+      end if;
 
-      Filter.Opened := False;
+      Code := Flate (Filter.Compression).Done (To_Thin_Access (Filter.Strm));
 
       if Ignore_Error or else Code = Thin.Z_OK then
          Free (Filter.Strm);
@@ -170,9 +171,8 @@ package body ZLib is
    is
       use Thin;
    begin
-      return Unsigned_32 (crc32
+      return Unsigned_32 (crc32 (ULong (CRC),
-        (ULong (CRC),
+                                 Data'Address,
-         Bytes.To_Pointer (Data'Address),
                                  Data'Length));
    end CRC32;
 
@@ -192,13 +192,17 @@ package body ZLib is
       Level        : in     Compression_Level  := Default_Compression;
       Strategy     : in     Strategy_Type      := Default_Strategy;
       Method       : in     Compression_Method := Deflated;
-      Window_Bits  : in     Window_Bits_Type   := 15;
+      Window_Bits  : in     Window_Bits_Type   := Default_Window_Bits;
-      Memory_Level : in     Memory_Level_Type  := 8;
+      Memory_Level : in     Memory_Level_Type  := Default_Memory_Level;
       Header       : in     Header_Type        := Default)
    is
       use type Thin.Int;
       Win_Bits : Thin.Int := Thin.Int (Window_Bits);
    begin
+      if Is_Open (Filter) then
+         raise Status_Error;
+      end if;
+
       --  We allow ZLib to make header only in case of default header type.
       --  Otherwise we would either do header by ourselfs, or do not do
       --  header at all.
@@ -219,7 +223,6 @@ package body ZLib is
       Filter.Strm        := new Z_Stream;
       Filter.Compression := True;
       Filter.Stream_End  := False;
-      Filter.Opened      := True;
       Filter.Header      := Header;
 
       if Thin.Deflate_Init
@@ -256,8 +259,8 @@ package body ZLib is
 
    procedure Generic_Translate
      (Filter          : in out ZLib.Filter_Type;
-      In_Buffer_Size  : Integer := Default_Buffer_Size;
+      In_Buffer_Size  : in     Integer := Default_Buffer_Size;
-      Out_Buffer_Size : Integer := Default_Buffer_Size)
+      Out_Buffer_Size : in     Integer := Default_Buffer_Size)
    is
       In_Buffer  : Stream_Element_Array
                      (1 .. Stream_Element_Offset (In_Buffer_Size));
@@ -275,18 +278,21 @@ package body ZLib is
 
          loop
             Translate
-              (Filter,
+              (Filter   => Filter,
-               In_Buffer (In_First .. Last),
+               In_Data  => In_Buffer (In_First .. Last),
-               In_Last,
+               In_Last  => In_Last,
-               Out_Buffer,
+               Out_Data => Out_Buffer,
-               Out_Last,
+               Out_Last => Out_Last,
-               Flush_Finish (Last < In_Buffer'First));
+               Flush    => Flush_Finish (Last < In_Buffer'First));
 
+            if Out_Buffer'First <= Out_Last then
                Data_Out (Out_Buffer (Out_Buffer'First .. Out_Last));
+            end if;
 
             exit Main when Stream_End (Filter);
 
             --  The end of in buffer.
+
             exit when In_Last = Last;
 
             In_First := In_Last + 1;
@@ -301,7 +307,7 @@ package body ZLib is
 
    procedure Inflate_Init
      (Filter      : in out Filter_Type;
-      Window_Bits : in     Window_Bits_Type := 15;
+      Window_Bits : in     Window_Bits_Type := Default_Window_Bits;
       Header      : in     Header_Type      := Default)
    is
       use type Thin.Int;
@@ -320,6 +326,10 @@ package body ZLib is
       end Check_Version;
 
    begin
+      if Is_Open (Filter) then
+         raise Status_Error;
+      end if;
+
       case Header is
          when None =>
             Check_Version;
@@ -347,7 +357,6 @@ package body ZLib is
       Filter.Strm        := new Z_Stream;
       Filter.Compression := False;
       Filter.Stream_End  := False;
-      Filter.Opened      := True;
       Filter.Header      := Header;
 
       if Thin.Inflate_Init
@@ -357,16 +366,25 @@ package body ZLib is
       end if;
    end Inflate_Init;
 
+   -------------
+   -- Is_Open --
+   -------------
+
+   function Is_Open (Filter : in Filter_Type) return Boolean is
+   begin
+      return Filter.Strm /= null;
+   end Is_Open;
+
    -----------------
    -- Raise_Error --
    -----------------
 
-   procedure Raise_Error (Message : String) is
+   procedure Raise_Error (Message : in String) is
    begin
       Ada.Exceptions.Raise_Exception (ZLib_Error'Identity, Message);
    end Raise_Error;
 
-   procedure Raise_Error (Stream : Z_Stream) is
+   procedure Raise_Error (Stream : in Z_Stream) is
    begin
       Raise_Error (Last_Error_Message (Stream));
    end Raise_Error;
@@ -378,21 +396,29 @@ package body ZLib is
    procedure Read
      (Filter : in out Filter_Type;
       Item   :    out Ada.Streams.Stream_Element_Array;
-      Last   :    out Ada.Streams.Stream_Element_Offset)
+      Last   :    out Ada.Streams.Stream_Element_Offset;
+      Flush  : in     Flush_Mode := No_Flush)
    is
       In_Last    : Stream_Element_Offset;
       Item_First : Ada.Streams.Stream_Element_Offset := Item'First;
+      V_Flush    : Flush_Mode := Flush;
 
    begin
       pragma Assert (Rest_First in Buffer'First .. Buffer'Last + 1);
+      pragma Assert (Rest_Last in Buffer'First - 1 .. Buffer'Last);
 
       loop
-         if Rest_First > Buffer'Last then
+         if Rest_Last = Buffer'First - 1 then
+            V_Flush := Finish;
+
+         elsif Rest_First > Rest_Last then
             Read (Buffer, Rest_Last);
             Rest_First := Buffer'First;
-         end if;
 
-         pragma Assert (Rest_Last in Buffer'First - 1 .. Buffer'Last);
+            if Rest_Last < Buffer'First then
+               V_Flush := Finish;
+            end if;
+         end if;
 
          Translate
            (Filter   => Filter,
@@ -400,11 +426,13 @@ package body ZLib is
             In_Last  => In_Last,
             Out_Data => Item (Item_First .. Item'Last),
             Out_Last => Last,
-            Flush    => Flush_Finish (Rest_Last < Rest_First));
+            Flush    => V_Flush);
 
          Rest_First := In_Last + 1;
 
-         exit when Last = Item'Last or else Stream_End (Filter);
+         exit when Stream_End (Filter)
+           or else Last = Item'Last
+           or else (Last >= Item'First and then Allow_Read_Some);
 
          Item_First := Last + 1;
       end loop;
@@ -489,11 +517,11 @@ package body ZLib is
       Code : Thin.Int;
 
    begin
-      if Filter.Opened = False then
+      if not Is_Open (Filter) then
-         raise ZLib_Error;
+         raise Status_Error;
       end if;
 
-      if Out_Data'Length = 0 then
+      if Out_Data'Length = 0 and then In_Data'Length = 0 then
          raise Constraint_Error;
       end if;
 
@@ -514,7 +542,6 @@ package body ZLib is
          - Stream_Element_Offset (Avail_In (Filter.Strm.all));
       Out_Last := Out_Data'Last
          - Stream_Element_Offset (Avail_Out (Filter.Strm.all));
-
    end Translate_Auto;
 
    --------------------
@@ -604,7 +631,6 @@ package body ZLib is
             Flush    => Flush);
 
          CRC32 (Filter.CRC, In_Data (In_Data'First .. In_Last));
-
       end if;
 
       if Filter.Stream_End and then Out_Last <= Out_Data'Last then
@@ -642,10 +668,11 @@ package body ZLib is
    procedure Write
      (Filter : in out Filter_Type;
       Item   : in     Ada.Streams.Stream_Element_Array;
-      Flush  : in     Flush_Mode)
+      Flush  : in     Flush_Mode := No_Flush)
    is
       Buffer   : Stream_Element_Array (1 .. Buffer_Size);
-      In_Last, Out_Last : Stream_Element_Offset;
+      In_Last  : Stream_Element_Offset;
+      Out_Last : Stream_Element_Offset;
       In_First : Stream_Element_Offset := Item'First;
    begin
       if Item'Length = 0 and Flush = No_Flush then

contrib/ada/zlib.ads

@@ -1,7 +1,7 @@
 ------------------------------------------------------------------------------
 --                      ZLib for Ada thick binding.                         --
 --                                                                          --
---              Copyright (C) 2002-2003 Dmitriy Anisimkov                   --
+--              Copyright (C) 2002-2004 Dmitriy Anisimkov                   --
 --                                                                          --
 --  This library is free software; you can redistribute it and/or modify    --
 --  it under the terms of the GNU General Public License as published by    --
@@ -25,7 +25,7 @@
 --  covered by the  GNU Public License.                                     --
 ------------------------------------------------------------------------------
 
---  $Id: zlib.ads,v 1.17 2003/08/12 13:19:07 vagul Exp $
+--  $Id: zlib.ads,v 1.26 2004/09/06 06:53:19 vagul Exp $
 
 with Ada.Streams;
 
@@ -34,6 +34,7 @@ with Interfaces;
 package ZLib is
 
    ZLib_Error   : exception;
+   Status_Error : exception;
 
    type Compression_Level is new Integer range -1 .. 9;
 
@@ -55,12 +56,15 @@ package ZLib is
 
    subtype Count is Ada.Streams.Stream_Element_Count;
 
+   Default_Memory_Level : constant Memory_Level_Type := 8;
+   Default_Window_Bits  : constant Window_Bits_Type  := 15;
+
    ----------------------------------
    -- Compression method constants --
    ----------------------------------
 
    Deflated : constant Compression_Method;
-   --  Only one method allowed in this ZLib version.
+   --  Only one method allowed in this ZLib version
 
    ---------------------------------
    -- Compression level constants --
@@ -79,21 +83,29 @@ package ZLib is
    --  Regular way for compression, no flush
 
    Partial_Flush : constant Flush_Mode;
-   --  will be removed, use Z_SYNC_FLUSH instead
+   --  Will be removed, use Z_SYNC_FLUSH instead
 
    Sync_Flush    : constant Flush_Mode;
-   --  all pending output is flushed to the output buffer and the output
+   --  All pending output is flushed to the output buffer and the output
    --  is aligned on a byte boundary, so that the decompressor can get all
    --  input data available so far. (In particular avail_in is zero after the
    --  call if enough output space has been provided  before the call.)
    --  Flushing may degrade compression for some compression algorithms and so
    --  it should be used only when necessary.
 
+   Block_Flush   : constant Flush_Mode;
+   --  Z_BLOCK requests that inflate() stop
+   --  if and when it get to the next deflate block boundary. When decoding the
+   --  zlib or gzip format, this will cause inflate() to return immediately
+   --  after the header and before the first block. When doing a raw inflate,
+   --  inflate() will go ahead and process the first block, and will return
+   --  when it gets to the end of that block, or when it runs out of data.
+
    Full_Flush    : constant Flush_Mode;
-   --  all output is flushed as with SYNC_FLUSH, and the compression state
+   --  All output is flushed as with SYNC_FLUSH, and the compression state
    --  is reset so that decompression can restart from this point if previous
    --  compressed data has been damaged or if random access is desired. Using
-   --  FULL_FLUSH too often can seriously degrade the compression.
+   --  Full_Flush too often can seriously degrade the compression.
 
    Finish        : constant Flush_Mode;
    --  Just for tell the compressor that input data is complete.
@@ -111,7 +123,7 @@ package ZLib is
 
    Default_Buffer_Size : constant := 4096;
 
-   type Filter_Type is limited private;
+   type Filter_Type is tagged limited private;
    --  The filter is for compression and for decompression.
    --  The usage of the type is depend of its initialization.
 
@@ -124,8 +136,8 @@ package ZLib is
       Level        : in     Compression_Level  := Default_Compression;
       Strategy     : in     Strategy_Type      := Default_Strategy;
       Method       : in     Compression_Method := Deflated;
-      Window_Bits  : in     Window_Bits_Type   := 15;
+      Window_Bits  : in     Window_Bits_Type   := Default_Window_Bits;
-      Memory_Level : in     Memory_Level_Type  := 8;
+      Memory_Level : in     Memory_Level_Type  := Default_Memory_Level;
       Header       : in     Header_Type        := Default);
    --  Compressor initialization.
    --  When Header parameter is Auto or Default, then default zlib header
@@ -136,7 +148,7 @@ package ZLib is
 
    procedure Inflate_Init
      (Filter      : in out Filter_Type;
-      Window_Bits : in     Window_Bits_Type := 15;
+      Window_Bits : in     Window_Bits_Type := Default_Window_Bits;
       Header      : in     Header_Type      := Default);
    --  Decompressor initialization.
    --  Default header type mean that ZLib default header is expecting in the
@@ -146,10 +158,14 @@ package ZLib is
    --  input compressed stream.
    --  Auto header type mean that header type (GZip or Native) would be
    --  detected automatically in the input stream.
-   --  Note that header types parameter values None, GZip and Auto is
+   --  Note that header types parameter values None, GZip and Auto are
-   --  supporting for inflate routine only in ZLib versions 1.2.0.2 and later.
+   --  supported for inflate routine only in ZLib versions 1.2.0.2 and later.
    --  Deflate_Init is supporting all header types.
 
+   function Is_Open (Filter : in Filter_Type) return Boolean;
+   pragma Inline (Is_Open);
+   --  Is the filter opened for compression or decompression.
+
    procedure Close
      (Filter       : in out Filter_Type;
       Ignore_Error : in     Boolean := False);
@@ -167,31 +183,31 @@ package ZLib is
      (Filter          : in out Filter_Type;
       In_Buffer_Size  : in     Integer := Default_Buffer_Size;
       Out_Buffer_Size : in     Integer := Default_Buffer_Size);
-   --  Compressing/decompressing data arrived from Data_In routine
+   --  Compress/decompress data fetch from Data_In routine and pass the result
    --  to the Data_Out routine. User should provide Data_In and Data_Out
    --  for compression/decompression data flow.
-   --  Compression or decompression depend on initialization of Filter.
+   --  Compression or decompression depend on Filter initialization.
 
    function Total_In (Filter : in Filter_Type) return Count;
    pragma Inline (Total_In);
-   --  Return total number of input bytes read so far.
+   --  Returns total number of input bytes read so far
 
    function Total_Out (Filter : in Filter_Type) return Count;
    pragma Inline (Total_Out);
-   --  Return total number of bytes output so far.
+   --  Returns total number of bytes output so far
 
    function CRC32
      (CRC    : in Unsigned_32;
       Data   : in Ada.Streams.Stream_Element_Array)
       return Unsigned_32;
    pragma Inline (CRC32);
-   --  Calculate CRC32, it could be necessary for make gzip format.
+   --  Compute CRC32, it could be necessary for make gzip format
 
    procedure CRC32
      (CRC  : in out Unsigned_32;
       Data : in     Ada.Streams.Stream_Element_Array);
    pragma Inline (CRC32);
-   --  Calculate CRC32, it could be necessary for make gzip format.
+   --  Compute CRC32, it could be necessary for make gzip format
 
    -------------------------------------------------
    --  Below is more complex low level routines.  --
@@ -204,15 +220,11 @@ package ZLib is
       Out_Data  :    out Ada.Streams.Stream_Element_Array;
       Out_Last  :    out Ada.Streams.Stream_Element_Offset;
       Flush     : in     Flush_Mode);
-   --  Compressing/decompressing the datas from In_Data buffer to the
+   --  Compress/decompress the In_Data buffer and place the result into
-   --  Out_Data buffer.
+   --  Out_Data. In_Last is the index of last element from In_Data accepted by
-   --  In_Data is incoming data portion,
+   --  the Filter. Out_Last is the last element of the received data from
-   --  In_Last is the index of last element from In_Data accepted by the
+   --  Filter. To tell the filter that incoming data are complete put the
-   --  Filter.
+   --  Flush parameter to Finish.
-   --  Out_Data is the buffer for output data from the filter.
-   --  Out_Last is the last element of the received data from Filter.
-   --  To tell the filter that incoming data is complete put the
-   --  Flush parameter to FINISH.
 
    function Stream_End (Filter : in Filter_Type) return Boolean;
    pragma Inline (Stream_End);
@@ -239,10 +251,9 @@ package ZLib is
    procedure Write
      (Filter  : in out Filter_Type;
       Item    : in     Ada.Streams.Stream_Element_Array;
-      Flush   : in     Flush_Mode);
+      Flush   : in     Flush_Mode := No_Flush);
-   --  Compressing/Decompressing data from Item to the
+   --  Compress/Decompress data from Item to the generic parameter procedure
-   --  generic parameter procedure Write.
+   --  Write. Output buffer size could be set in Buffer_Size generic parameter.
-   --  Output buffer size could be set in Buffer_Size generic parameter.
 
    generic
       with procedure Read
@@ -257,33 +268,41 @@ package ZLib is
 
       Rest_First, Rest_Last : in out Ada.Streams.Stream_Element_Offset;
       --  Rest_First have to be initialized to Buffer'Last + 1
+      --  Rest_Last have to be initialized to Buffer'Last
       --  before usage.
 
+      Allow_Read_Some : in Boolean := False;
+      --  Is it allowed to return Last < Item'Last before end of data.
+
    procedure Read
      (Filter : in out Filter_Type;
       Item   :    out Ada.Streams.Stream_Element_Array;
-      Last   :    out Ada.Streams.Stream_Element_Offset);
+      Last   :    out Ada.Streams.Stream_Element_Offset;
-   --  Compressing/Decompressing data from generic parameter
+      Flush  : in     Flush_Mode := No_Flush);
-   --  procedure Read to the Item.
+   --  Compress/Decompress data from generic parameter procedure Read to the
-   --  User should provide Buffer for the operation
+   --  Item. User should provide Buffer and initialized Rest_First, Rest_Last
-   --  and Rest_First variable first time initialized to the Buffer'Last + 1.
+   --  indicators. If Allow_Read_Some is True, Read routines could return
+   --  Last < Item'Last only at end of stream.
 
 private
 
    use Ada.Streams;
 
-   type Flush_Mode is new Integer range 0 .. 4;
+   pragma Assert (Ada.Streams.Stream_Element'Size    =    8);
+   pragma Assert (Ada.Streams.Stream_Element'Modulus = 2**8);
+
+   type Flush_Mode is new Integer range 0 .. 5;
 
    type Compression_Method is new Integer range 8 .. 8;
 
    type Strategy_Type is new Integer range 0 .. 3;
 
    No_Flush      : constant Flush_Mode := 0;
+   Partial_Flush : constant Flush_Mode := 1;
    Sync_Flush    : constant Flush_Mode := 2;
    Full_Flush    : constant Flush_Mode := 3;
    Finish        : constant Flush_Mode := 4;
-   Partial_Flush : constant Flush_Mode := 1;
+   Block_Flush   : constant Flush_Mode := 5;
-   --  will be removed, use Z_SYNC_FLUSH instead
 
    Filtered         : constant Strategy_Type := 1;
    Huffman_Only     : constant Strategy_Type := 2;
@@ -296,7 +315,7 @@ private
 
    type Z_Stream_Access is access all Z_Stream;
 
-   type Filter_Type is record
+   type Filter_Type is tagged limited record
       Strm        : Z_Stream_Access;
       Compression : Boolean;
       Stream_End  : Boolean;
@@ -304,8 +323,6 @@ private
       CRC         : Unsigned_32;
       Offset      : Stream_Element_Offset;
       --  Offset for gzip header/footer output.
-
-      Opened      : Boolean := False;
    end record;
 
 end ZLib;

contrib/ada/zlib.gpr

@@ -3,10 +3,10 @@ project Zlib is
    for Languages use ("Ada");
    for Source_Dirs use (".");
    for Object_Dir use ".";
-   for Main use ("test.adb", "mtest.adb", "read.adb");
+   for Main use ("test.adb", "mtest.adb", "read.adb", "buffer_demo");
 
    package Compiler is
-      for Default_Switches ("ada") use ("-gnatwbcfilopru", "-gnatVcdfimorst", "-gnatyabcefhiklmnoprst");
+      for Default_Switches ("ada") use ("-gnatwcfilopru", "-gnatVcdfimorst", "-gnatyabcefhiklmnoprst");
    end Compiler;
 
    package Linker is
@@ -18,4 +18,3 @@ project Zlib is
    end Builder;
 
 end Zlib;
-

contrib/asm586/match.S

@@ -45,19 +45,29 @@
  * program to crash horribly, without so much as a warning at
  * compile time. Sigh.)
  */
-#define	dsWSize			36
+
-#define	dsWMask			44
+/* All the +zlib1222add offsets are due to the addition of fields
-#define	dsWindow		48
+ *  in zlib in the deflate_state structure since the asm code was first written
-#define	dsPrev			56
+ * (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
-#define	dsMatchLen		88
+ * (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
-#define	dsPrevMatch		92
+ * if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
-#define	dsStrStart		100
+ */
-#define	dsMatchStart		104
+
-#define	dsLookahead		108
+#define zlib1222add		(8)
-#define	dsPrevLen		112
+
-#define	dsMaxChainLen		116
+#define	dsWSize			(36+zlib1222add)
-#define	dsGoodMatch		132
+#define	dsWMask			(44+zlib1222add)
-#define	dsNiceMatch		136
+#define	dsWindow		(48+zlib1222add)
+#define	dsPrev			(56+zlib1222add)
+#define	dsMatchLen		(88+zlib1222add)
+#define	dsPrevMatch		(92+zlib1222add)
+#define	dsStrStart		(100+zlib1222add)
+#define	dsMatchStart		(104+zlib1222add)
+#define	dsLookahead		(108+zlib1222add)
+#define	dsPrevLen		(112+zlib1222add)
+#define	dsMaxChainLen		(116+zlib1222add)
+#define	dsGoodMatch		(132+zlib1222add)
+#define	dsNiceMatch		(136+zlib1222add)
 
 
 .file "match.S"

contrib/asm686/match.S

@@ -38,26 +38,28 @@
 #define	deflatestate		56	/* the function arguments	*/
 #define	curmatch		60
 
-/* Offsets for fields in the deflate_state structure. These numbers
+/* All the +zlib1222add offsets are due to the addition of fields
- * are calculated from the definition of deflate_state, with the
+ *  in zlib in the deflate_state structure since the asm code was first written
- * assumption that the compiler will dword-align the fields. (Thus,
+ * (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
- * changing the definition of deflate_state could easily cause this
+ * (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
- * program to crash horribly, without so much as a warning at
+ * if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
- * compile time. Sigh.)
  */
-#define	dsWSize			36
+
-#define	dsWMask			44
+#define zlib1222add		(8)
-#define	dsWindow		48
+
-#define	dsPrev			56
+#define	dsWSize			(36+zlib1222add)
-#define	dsMatchLen		88
+#define	dsWMask			(44+zlib1222add)
-#define	dsPrevMatch		92
+#define	dsWindow		(48+zlib1222add)
-#define	dsStrStart		100
+#define	dsPrev			(56+zlib1222add)
-#define	dsMatchStart		104
+#define	dsMatchLen		(88+zlib1222add)
-#define	dsLookahead		108
+#define	dsPrevMatch		(92+zlib1222add)
-#define	dsPrevLen		112
+#define	dsStrStart		(100+zlib1222add)
-#define	dsMaxChainLen		116
+#define	dsMatchStart		(104+zlib1222add)
-#define	dsGoodMatch		132
+#define	dsLookahead		(108+zlib1222add)
-#define	dsNiceMatch		136
+#define	dsPrevLen		(112+zlib1222add)
+#define	dsMaxChainLen		(116+zlib1222add)
+#define	dsGoodMatch		(132+zlib1222add)
+#define	dsNiceMatch		(136+zlib1222add)
 
 
 .file "match.S"

contrib/delphi/ZLib.pas

@@ -152,7 +152,7 @@ procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
   const OutBuf: Pointer; BufSize: Integer);
 
 const
-  zlib_version = '1.2.1';
+  zlib_version = '1.2.3';
 
 type
   EZlibError = class(Exception);
@@ -344,7 +344,7 @@ begin
     strm.avail_out := OutBytes;
     DCheck(inflateInit_(strm, zlib_version, sizeof(strm)));
     try
-      while DCheck(inflate(strm, Z_FINISH)) <> Z_STREAM_END do
+      while DCheck(inflate(strm, Z_NO_FLUSH)) <> Z_STREAM_END do
       begin
         P := OutBuf;
         Inc(OutBytes, BufInc);

contrib/dotzlib/DotZLib.build

@@ -0,0 +1,33 @@
+<?xml version="1.0" encoding="utf-8" ?>
+<project name="DotZLib" default="build" basedir="./DotZLib">
+	<description>A .Net wrapper library around ZLib1.dll</description>
+
+	<property name="nunit.location" value="c:/program files/NUnit V2.1/bin" />
+	<property name="build.root" value="bin" />
+	
+	<property name="debug" value="true" />
+	<property name="nunit" value="true" />
+
+	<property name="build.folder" value="${build.root}/debug/" if="${debug}" />
+	<property name="build.folder" value="${build.root}/release/" unless="${debug}" />
+
+	<target name="clean" description="Remove all generated files">
+		<delete dir="${build.root}" failonerror="false" />
+	</target>
+
+	<target name="build" description="compiles the source code">
+		
+		<mkdir dir="${build.folder}" />
+		<csc target="library" output="${build.folder}DotZLib.dll" debug="${debug}">
+			<references basedir="${nunit.location}">
+				<includes if="${nunit}" name="nunit.framework.dll" />
+			</references>
+			<sources>
+				<includes name="*.cs" />
+				<excludes name="UnitTests.cs" unless="${nunit}" />
+			</sources>
+			<arg value="/d:nunit" if="${nunit}" />
+		</csc>
+	</target>
+
+</project>

contrib/dotzlib/DotZLib.sln

@@ -0,0 +1,21 @@
+Microsoft Visual Studio Solution File, Format Version 8.00
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "DotZLib", "DotZLib\DotZLib.csproj", "{BB1EE0B1-1808-46CB-B786-949D91117FC5}"
+	ProjectSection(ProjectDependencies) = postProject
+	EndProjectSection
+EndProject
+Global
+	GlobalSection(SolutionConfiguration) = preSolution
+		Debug = Debug
+		Release = Release
+	EndGlobalSection
+	GlobalSection(ProjectConfiguration) = postSolution
+		{BB1EE0B1-1808-46CB-B786-949D91117FC5}.Debug.ActiveCfg = Debug|.NET
+		{BB1EE0B1-1808-46CB-B786-949D91117FC5}.Debug.Build.0 = Debug|.NET
+		{BB1EE0B1-1808-46CB-B786-949D91117FC5}.Release.ActiveCfg = Release|.NET
+		{BB1EE0B1-1808-46CB-B786-949D91117FC5}.Release.Build.0 = Release|.NET
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+	EndGlobalSection
+	GlobalSection(ExtensibilityAddIns) = postSolution
+	EndGlobalSection
+EndGlobal

contrib/dotzlib/DotZLib/AssemblyInfo.cs

@@ -0,0 +1,58 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("DotZLib")]
+[assembly: AssemblyDescription(".Net bindings for ZLib compression dll 1.2.x")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("Henrik Ravn")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("(c) 2004 by Henrik Ravn")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.0.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+[assembly: AssemblyKeyFile("")]
+[assembly: AssemblyKeyName("")]

contrib/dotzlib/DotZLib/ChecksumImpl.cs

@@ -0,0 +1,202 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Runtime.InteropServices;
+using System.Text;
+
+
+namespace DotZLib
+{
+    #region ChecksumGeneratorBase
+    /// <summary>
+    /// Implements the common functionality needed for all <see cref="ChecksumGenerator"/>s
+    /// </summary>
+    /// <example></example>
+    public abstract class ChecksumGeneratorBase : ChecksumGenerator
+    {
+        /// <summary>
+        /// The value of the current checksum
+        /// </summary>
+        protected uint _current;
+
+        /// <summary>
+        /// Initializes a new instance of the checksum generator base - the current checksum is 
+        /// set to zero
+        /// </summary>
+        public ChecksumGeneratorBase()
+        {
+            _current = 0;
+        }
+
+        /// <summary>
+        /// Initializes a new instance of the checksum generator basewith a specified value
+        /// </summary>
+        /// <param name="initialValue">The value to set the current checksum to</param>
+        public ChecksumGeneratorBase(uint initialValue)
+        {
+            _current = initialValue;
+        }
+
+        /// <summary>
+        /// Resets the current checksum to zero
+        /// </summary>
+        public void Reset() { _current = 0; }
+
+        /// <summary>
+        /// Gets the current checksum value
+        /// </summary>
+        public uint Value { get { return _current; } }
+
+        /// <summary>
+        /// Updates the current checksum with part of an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        /// <param name="offset">Where in <c>data</c> to start updating</param>
+        /// <param name="count">The number of bytes from <c>data</c> to use</param>
+        /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+        /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>
+        /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+        /// <remarks>All the other <c>Update</c> methods are implmeneted in terms of this one. 
+        /// This is therefore the only method a derived class has to implement</remarks>
+        public abstract void Update(byte[] data, int offset, int count);
+
+        /// <summary>
+        /// Updates the current checksum with an array of bytes.
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        public void Update(byte[] data)
+        {
+            Update(data, 0, data.Length);
+        }
+
+        /// <summary>
+        /// Updates the current checksum with the data from a string
+        /// </summary>
+        /// <param name="data">The string to update the checksum with</param>
+        /// <remarks>The characters in the string are converted by the UTF-8 encoding</remarks>
+        public void Update(string data)
+        {
+			Update(Encoding.UTF8.GetBytes(data));
+        }
+
+        /// <summary>
+        /// Updates the current checksum with the data from a string, using a specific encoding
+        /// </summary>
+        /// <param name="data">The string to update the checksum with</param>
+        /// <param name="encoding">The encoding to use</param>
+        public void Update(string data, Encoding encoding)
+        {
+            Update(encoding.GetBytes(data));
+        }
+
+    }
+    #endregion
+
+    #region CRC32
+    /// <summary>
+    /// Implements a CRC32 checksum generator
+    /// </summary>
+    public sealed class CRC32Checksum : ChecksumGeneratorBase    
+    {
+        #region DLL imports
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern uint crc32(uint crc, int data, uint length);
+
+        #endregion
+
+        /// <summary>
+        /// Initializes a new instance of the CRC32 checksum generator
+        /// </summary>
+        public CRC32Checksum() : base() {}
+
+        /// <summary>
+        /// Initializes a new instance of the CRC32 checksum generator with a specified value
+        /// </summary>
+        /// <param name="initialValue">The value to set the current checksum to</param>
+        public CRC32Checksum(uint initialValue) : base(initialValue) {}
+
+        /// <summary>
+        /// Updates the current checksum with part of an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        /// <param name="offset">Where in <c>data</c> to start updating</param>
+        /// <param name="count">The number of bytes from <c>data</c> to use</param>
+        /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+        /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>
+        /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+        public override void Update(byte[] data, int offset, int count)
+        {
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > data.Length) throw new ArgumentException();
+            GCHandle hData = GCHandle.Alloc(data, GCHandleType.Pinned);
+            try
+            {
+                _current = crc32(_current, hData.AddrOfPinnedObject().ToInt32()+offset, (uint)count);
+            }
+            finally
+            {
+                hData.Free();
+            }
+        }
+
+    }
+    #endregion
+
+    #region Adler
+    /// <summary>
+    /// Implements a checksum generator that computes the Adler checksum on data
+    /// </summary>
+    public sealed class AdlerChecksum : ChecksumGeneratorBase    
+    {
+        #region DLL imports
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern uint adler32(uint adler, int data, uint length);
+
+        #endregion
+
+        /// <summary>
+        /// Initializes a new instance of the Adler checksum generator
+        /// </summary>
+        public AdlerChecksum() : base() {}
+
+        /// <summary>
+        /// Initializes a new instance of the Adler checksum generator with a specified value
+        /// </summary>
+        /// <param name="initialValue">The value to set the current checksum to</param>
+        public AdlerChecksum(uint initialValue) : base(initialValue) {}
+
+        /// <summary>
+        /// Updates the current checksum with part of an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        /// <param name="offset">Where in <c>data</c> to start updating</param>
+        /// <param name="count">The number of bytes from <c>data</c> to use</param>
+        /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+        /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>
+        /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+        public override void Update(byte[] data, int offset, int count)
+        {
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > data.Length) throw new ArgumentException();
+            GCHandle hData = GCHandle.Alloc(data, GCHandleType.Pinned);
+            try
+            {
+                _current = adler32(_current, hData.AddrOfPinnedObject().ToInt32()+offset, (uint)count);
+            }
+            finally
+            {
+                hData.Free();
+            }
+        }
+
+    }
+    #endregion
+
+}

contrib/dotzlib/DotZLib/CircularBuffer.cs

@@ -0,0 +1,83 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Diagnostics;
+
+namespace DotZLib
+{
+
+	/// <summary>
+	/// This class implements a circular buffer
+	/// </summary>
+	internal class CircularBuffer
+	{
+        #region Private data
+        private int _capacity;
+        private int _head;
+        private int _tail;
+        private int _size;
+        private byte[] _buffer;
+        #endregion
+
+        public CircularBuffer(int capacity)
+        {    
+            Debug.Assert( capacity > 0 );
+            _buffer = new byte[capacity];
+            _capacity = capacity;
+            _head = 0;
+            _tail = 0;
+            _size = 0;
+        }
+
+        public int Size { get { return _size; } }
+
+        public int Put(byte[] source, int offset, int count)
+        {
+            Debug.Assert( count > 0 );
+            int trueCount = Math.Min(count, _capacity - Size);
+            for (int i = 0; i < trueCount; ++i)
+                _buffer[(_tail+i) % _capacity] = source[offset+i];
+            _tail += trueCount;
+            _tail %= _capacity;
+            _size += trueCount;
+            return trueCount;
+        }
+
+        public bool Put(byte b)
+        {
+            if (Size == _capacity) // no room
+                return false;
+            _buffer[_tail++] = b;
+            _tail %= _capacity;
+            ++_size;
+            return true;
+        }
+
+        public int Get(byte[] destination, int offset, int count)
+        {
+            int trueCount = Math.Min(count,Size);
+            for (int i = 0; i < trueCount; ++i)
+                destination[offset + i] = _buffer[(_head+i) % _capacity];
+            _head += trueCount;
+            _head %= _capacity;
+            _size -= trueCount;
+            return trueCount;
+        }
+
+        public int Get()
+        {
+            if (Size == 0)
+                return -1;
+
+            int result = (int)_buffer[_head++ % _capacity];
+            --_size;
+            return result;
+        }
+
+    }
+}

contrib/dotzlib/DotZLib/CodecBase.cs

@@ -0,0 +1,198 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+	/// <summary>
+	/// Implements the common functionality needed for all <see cref="Codec"/>s
+	/// </summary>
+	public abstract class CodecBase : Codec, IDisposable
+	{
+
+        #region Data members
+
+        /// <summary>
+        /// Instance of the internal zlib buffer structure that is 
+        /// passed to all functions in the zlib dll
+        /// </summary>
+        internal ZStream _ztream = new ZStream();
+
+        /// <summary>
+        /// True if the object instance has been disposed, false otherwise
+        /// </summary>
+        protected bool _isDisposed = false;
+
+        /// <summary>
+        /// The size of the internal buffers
+        /// </summary>
+        protected const int kBufferSize = 16384;
+
+        private byte[] _outBuffer = new byte[kBufferSize];
+        private byte[] _inBuffer = new byte[kBufferSize];
+
+        private GCHandle _hInput;
+        private GCHandle _hOutput;
+
+        private uint _checksum = 0;
+
+        #endregion
+
+        /// <summary>
+        /// Initializes a new instance of the <c>CodeBase</c> class. 
+        /// </summary>
+		public CodecBase()
+		{
+            try
+            {
+                _hInput = GCHandle.Alloc(_inBuffer, GCHandleType.Pinned);
+                _hOutput = GCHandle.Alloc(_outBuffer, GCHandleType.Pinned);
+            }
+            catch (Exception)
+            {
+                CleanUp(false);
+                throw;
+            }
+        }
+
+
+        #region Codec Members
+
+        /// <summary>
+        /// Occurs when more processed data are available.
+        /// </summary>
+        public event DataAvailableHandler DataAvailable;
+
+        /// <summary>
+        /// Fires the <see cref="DataAvailable"/> event
+        /// </summary>
+        protected void OnDataAvailable()
+        {
+            if (_ztream.total_out > 0)
+            {
+                if (DataAvailable != null)
+                    DataAvailable( _outBuffer, 0, (int)_ztream.total_out); 
+                resetOutput();
+            }
+        }
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        public void Add(byte[] data)
+        {
+            Add(data,0,data.Length);
+        }
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+        /// <param name="count">The number of bytes to add</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        /// <remarks>This must be implemented by a derived class</remarks>
+        public abstract void Add(byte[] data, int offset, int count);
+
+        /// <summary>
+        /// Finishes up any pending data that needs to be processed and handled.
+        /// </summary>
+        /// <remarks>This must be implemented by a derived class</remarks>
+        public abstract void Finish();
+
+        /// <summary>
+        /// Gets the checksum of the data that has been added so far
+        /// </summary>
+        public uint Checksum { get { return _checksum; } }
+
+        #endregion
+
+        #region Destructor & IDisposable stuff
+
+        /// <summary>
+        /// Destroys this instance
+        /// </summary>
+        ~CodecBase()
+        {
+            CleanUp(false);
+        }
+
+        /// <summary>
+        /// Releases any unmanaged resources and calls the <see cref="CleanUp()"/> method of the derived class
+        /// </summary>
+        public void Dispose()
+        {
+            CleanUp(true);
+        }
+
+        /// <summary>
+        /// Performs any codec specific cleanup
+        /// </summary>
+        /// <remarks>This must be implemented by a derived class</remarks>
+        protected abstract void CleanUp();
+
+        // performs the release of the handles and calls the dereived CleanUp()
+        private void CleanUp(bool isDisposing)
+        {
+            if (!_isDisposed)
+            {
+                CleanUp();
+                if (_hInput.IsAllocated)
+                    _hInput.Free();
+                if (_hOutput.IsAllocated)
+                    _hOutput.Free();
+
+                _isDisposed = true;
+            }
+        }
+
+
+        #endregion
+
+        #region Helper methods
+
+        /// <summary>
+        /// Copies a number of bytes to the internal codec buffer - ready for proccesing
+        /// </summary>
+        /// <param name="data">The byte array that contains the data to copy</param>
+        /// <param name="startIndex">The index of the first byte to copy</param>
+        /// <param name="count">The number of bytes to copy from <c>data</c></param>
+        protected void copyInput(byte[] data, int startIndex, int count)
+        {
+            Array.Copy(data, startIndex, _inBuffer,0, count);
+            _ztream.next_in = _hInput.AddrOfPinnedObject();
+            _ztream.total_in = 0;
+            _ztream.avail_in = (uint)count;
+
+        }
+
+        /// <summary>
+        /// Resets the internal output buffers to a known state - ready for processing
+        /// </summary>
+        protected void resetOutput()
+        {
+            _ztream.total_out = 0;
+            _ztream.avail_out = kBufferSize;
+            _ztream.next_out = _hOutput.AddrOfPinnedObject();
+        }
+
+        /// <summary>
+        /// Updates the running checksum property
+        /// </summary>
+        /// <param name="newSum">The new checksum value</param>
+        protected void setChecksum(uint newSum)
+        {
+            _checksum = newSum;
+        }
+        #endregion
+
+    }
+}

contrib/dotzlib/DotZLib/Deflater.cs

@@ -0,0 +1,106 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Diagnostics;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+
+    /// <summary>
+    /// Implements a data compressor, using the deflate algorithm in the ZLib dll
+    /// </summary>
+	public sealed class Deflater : CodecBase
+	{
+        #region Dll imports
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)]
+        private static extern int deflateInit_(ref ZStream sz, int level, string vs, int size);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int deflate(ref ZStream sz, int flush);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int deflateReset(ref ZStream sz);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int deflateEnd(ref ZStream sz);
+        #endregion
+
+        /// <summary>
+        /// Constructs an new instance of the <c>Deflater</c>
+        /// </summary>
+        /// <param name="level">The compression level to use for this <c>Deflater</c></param>
+		public Deflater(CompressLevel level) : base()
+		{
+            int retval = deflateInit_(ref _ztream, (int)level, Info.Version, Marshal.SizeOf(_ztream));
+            if (retval != 0)
+                throw new ZLibException(retval, "Could not initialize deflater");
+
+            resetOutput();
+		}
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+        /// <param name="count">The number of bytes to add</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        public override void Add(byte[] data, int offset, int count)
+        {
+            if (data == null) throw new ArgumentNullException();
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > data.Length) throw new ArgumentException();
+            
+            int total = count;
+            int inputIndex = offset;
+            int err = 0;
+
+            while (err >= 0 && inputIndex < total)
+            {
+                copyInput(data, inputIndex, Math.Min(total - inputIndex, kBufferSize));
+                while (err >= 0 && _ztream.avail_in > 0)
+                {
+                    err = deflate(ref _ztream, (int)FlushTypes.None);
+                    if (err == 0)
+                        while (_ztream.avail_out == 0)
+                        {
+                            OnDataAvailable();
+                            err = deflate(ref _ztream, (int)FlushTypes.None);
+                        }
+                    inputIndex += (int)_ztream.total_in;
+                }
+            }
+            setChecksum( _ztream.adler );
+        }
+
+
+        /// <summary>
+        /// Finishes up any pending data that needs to be processed and handled.
+        /// </summary>
+        public override void Finish()
+        {
+            int err;
+            do 
+            {
+                err = deflate(ref _ztream, (int)FlushTypes.Finish);
+                OnDataAvailable();
+            }
+            while (err == 0);
+            setChecksum( _ztream.adler );
+            deflateReset(ref _ztream);
+            resetOutput();
+        }
+
+        /// <summary>
+        /// Closes the internal zlib deflate stream
+        /// </summary>
+        protected override void CleanUp() { deflateEnd(ref _ztream); }
+
+    }
+}

contrib/dotzlib/DotZLib/DotZLib.cs

@@ -0,0 +1,288 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.IO;
+using System.Runtime.InteropServices;
+using System.Text;
+
+
+namespace DotZLib
+{
+
+    #region Internal types
+
+    /// <summary>
+    /// Defines constants for the various flush types used with zlib
+    /// </summary>
+    internal enum FlushTypes 
+    {
+        None,  Partial,  Sync,  Full,  Finish,  Block
+    }
+
+    #region ZStream structure
+    // internal mapping of the zlib zstream structure for marshalling
+    [StructLayoutAttribute(LayoutKind.Sequential, Pack=4, Size=0, CharSet=CharSet.Ansi)]
+    internal struct ZStream
+    {
+        public IntPtr next_in;
+        public uint avail_in;
+        public uint total_in;
+
+        public IntPtr next_out;
+        public uint avail_out;
+        public uint total_out;
+
+        [MarshalAs(UnmanagedType.LPStr)]
+        string msg; 
+        uint state;
+
+        uint zalloc;
+        uint zfree;
+        uint opaque;
+
+        int data_type;
+        public uint adler;
+        uint reserved;
+    }
+
+    #endregion
+    
+    #endregion
+
+    #region Public enums
+    /// <summary>
+    /// Defines constants for the available compression levels in zlib
+    /// </summary>
+    public enum CompressLevel : int
+    {
+        /// <summary>
+        /// The default compression level with a reasonable compromise between compression and speed
+        /// </summary>
+        Default = -1,   
+        /// <summary>
+        /// No compression at all. The data are passed straight through.
+        /// </summary>
+        None = 0,
+        /// <summary>
+        /// The maximum compression rate available.
+        /// </summary>
+        Best = 9,   
+        /// <summary>
+        /// The fastest available compression level.
+        /// </summary>
+        Fastest = 1
+    }
+    #endregion
+
+    #region Exception classes
+    /// <summary>
+    /// The exception that is thrown when an error occurs on the zlib dll
+    /// </summary>
+    public class ZLibException : ApplicationException
+    {
+        /// <summary>
+        /// Initializes a new instance of the <see cref="ZLibException"/> class with a specified 
+        /// error message and error code
+        /// </summary>
+        /// <param name="errorCode">The zlib error code that caused the exception</param>
+        /// <param name="msg">A message that (hopefully) describes the error</param>
+        public ZLibException(int errorCode, string msg) : base(String.Format("ZLib error {0} {1}", errorCode, msg))
+        {
+        }
+
+        /// <summary>
+        /// Initializes a new instance of the <see cref="ZLibException"/> class with a specified 
+        /// error code
+        /// </summary>
+        /// <param name="errorCode">The zlib error code that caused the exception</param>
+        public ZLibException(int errorCode) : base(String.Format("ZLib error {0}", errorCode))
+        {
+        }
+    }
+    #endregion
+
+    #region Interfaces
+
+    /// <summary>
+    /// Declares methods and properties that enables a running checksum to be calculated 
+    /// </summary>
+    public interface ChecksumGenerator
+    {
+        /// <summary>
+        /// Gets the current value of the checksum
+        /// </summary>
+        uint Value { get; }
+
+        /// <summary>
+        /// Clears the current checksum to 0
+        /// </summary>
+        void Reset();
+
+        /// <summary>
+        /// Updates the current checksum with an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        void Update(byte[] data);
+
+        /// <summary>
+        /// Updates the current checksum with part of an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        /// <param name="offset">Where in <c>data</c> to start updating</param>
+        /// <param name="count">The number of bytes from <c>data</c> to use</param>
+        /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+        /// <exception cref="ArgumentNullException"><c>data</c> is a null reference</exception>
+        /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+        void Update(byte[] data, int offset, int count);
+
+        /// <summary>
+        /// Updates the current checksum with the data from a string
+        /// </summary>
+        /// <param name="data">The string to update the checksum with</param>
+        /// <remarks>The characters in the string are converted by the UTF-8 encoding</remarks>
+        void Update(string data);
+
+        /// <summary>
+        /// Updates the current checksum with the data from a string, using a specific encoding
+        /// </summary>
+        /// <param name="data">The string to update the checksum with</param>
+        /// <param name="encoding">The encoding to use</param>
+        void Update(string data, Encoding encoding);
+    }
+
+
+    /// <summary>
+    /// Represents the method that will be called from a codec when new data
+    /// are available.
+    /// </summary>
+    /// <paramref name="data">The byte array containing the processed data</paramref>
+    /// <paramref name="startIndex">The index of the first processed byte in <c>data</c></paramref>
+    /// <paramref name="count">The number of processed bytes available</paramref>
+    /// <remarks>On return from this method, the data may be overwritten, so grab it while you can. 
+    /// You cannot assume that startIndex will be zero.
+    /// </remarks>
+    public delegate void DataAvailableHandler(byte[] data, int startIndex, int count);
+
+    /// <summary>
+    /// Declares methods and events for implementing compressors/decompressors
+    /// </summary>
+    public interface Codec
+    {
+        /// <summary>
+        /// Occurs when more processed data are available.
+        /// </summary>
+        event DataAvailableHandler DataAvailable;
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        void Add(byte[] data);
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+        /// <param name="count">The number of bytes to add</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        void Add(byte[] data, int offset, int count);
+
+        /// <summary>
+        /// Finishes up any pending data that needs to be processed and handled.
+        /// </summary>
+        void Finish();
+
+        /// <summary>
+        /// Gets the checksum of the data that has been added so far
+        /// </summary>
+        uint Checksum { get; }
+
+
+    }
+
+    #endregion
+
+    #region Classes
+    /// <summary>
+    /// Encapsulates general information about the ZLib library
+    /// </summary>
+    public class Info
+    {
+        #region DLL imports
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern uint zlibCompileFlags();
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern string zlibVersion();
+        #endregion
+
+        #region Private stuff
+        private uint _flags;
+
+        // helper function that unpacks a bitsize mask
+        private static int bitSize(uint bits)
+        {
+            switch (bits)
+            {
+                case 0: return 16;
+                case 1: return 32;
+                case 2: return 64;
+            }
+            return -1;
+        }
+        #endregion
+
+        /// <summary>
+        /// Constructs an instance of the <c>Info</c> class.
+        /// </summary>
+        public Info()
+        {
+            _flags = zlibCompileFlags();
+        }
+
+        /// <summary>
+        /// True if the library is compiled with debug info
+        /// </summary>
+        public bool HasDebugInfo { get { return 0 != (_flags & 0x100); } }
+
+        /// <summary>
+        /// True if the library is compiled with assembly optimizations
+        /// </summary>
+        public bool UsesAssemblyCode { get { return 0 != (_flags & 0x200); } }
+
+        /// <summary>
+        /// Gets the size of the unsigned int that was compiled into Zlib
+        /// </summary>
+        public int SizeOfUInt { get { return bitSize(_flags & 3); } }
+
+        /// <summary>
+        /// Gets the size of the unsigned long that was compiled into Zlib
+        /// </summary>
+        public int SizeOfULong { get { return bitSize((_flags >> 2) & 3); } }
+
+        /// <summary>
+        /// Gets the size of the pointers that were compiled into Zlib
+        /// </summary>
+        public int SizeOfPointer { get { return bitSize((_flags >> 4) & 3); } }
+
+        /// <summary>
+        /// Gets the size of the z_off_t type that was compiled into Zlib
+        /// </summary>
+        public int SizeOfOffset { get { return bitSize((_flags >> 6) & 3); } }
+
+        /// <summary>
+        /// Gets the version of ZLib as a string, e.g. "1.2.1"
+        /// </summary>
+        public static string Version { get { return zlibVersion(); } }
+    }
+
+    #endregion
+
+}

contrib/dotzlib/DotZLib/DotZLib.csproj

@@ -0,0 +1,141 @@
+<VisualStudioProject>
+    <CSHARP
+        ProjectType = "Local"
+        ProductVersion = "7.10.3077"
+        SchemaVersion = "2.0"
+        ProjectGuid = "{BB1EE0B1-1808-46CB-B786-949D91117FC5}"
+    >
+        <Build>
+            <Settings
+                ApplicationIcon = ""
+                AssemblyKeyContainerName = ""
+                AssemblyName = "DotZLib"
+                AssemblyOriginatorKeyFile = ""
+                DefaultClientScript = "JScript"
+                DefaultHTMLPageLayout = "Grid"
+                DefaultTargetSchema = "IE50"
+                DelaySign = "false"
+                OutputType = "Library"
+                PreBuildEvent = ""
+                PostBuildEvent = ""
+                RootNamespace = "DotZLib"
+                RunPostBuildEvent = "OnBuildSuccess"
+                StartupObject = ""
+            >
+                <Config
+                    Name = "Debug"
+                    AllowUnsafeBlocks = "false"
+                    BaseAddress = "285212672"
+                    CheckForOverflowUnderflow = "false"
+                    ConfigurationOverrideFile = ""
+                    DefineConstants = "DEBUG;TRACE"
+                    DocumentationFile = "docs\DotZLib.xml"
+                    DebugSymbols = "true"
+                    FileAlignment = "4096"
+                    IncrementalBuild = "false"
+                    NoStdLib = "false"
+                    NoWarn = "1591"
+                    Optimize = "false"
+                    OutputPath = "bin\Debug\"
+                    RegisterForComInterop = "false"
+                    RemoveIntegerChecks = "false"
+                    TreatWarningsAsErrors = "false"
+                    WarningLevel = "4"
+                />
+                <Config
+                    Name = "Release"
+                    AllowUnsafeBlocks = "false"
+                    BaseAddress = "285212672"
+                    CheckForOverflowUnderflow = "false"
+                    ConfigurationOverrideFile = ""
+                    DefineConstants = "TRACE"
+                    DocumentationFile = "docs\DotZLib.xml"
+                    DebugSymbols = "false"
+                    FileAlignment = "4096"
+                    IncrementalBuild = "false"
+                    NoStdLib = "false"
+                    NoWarn = ""
+                    Optimize = "true"
+                    OutputPath = "bin\Release\"
+                    RegisterForComInterop = "false"
+                    RemoveIntegerChecks = "false"
+                    TreatWarningsAsErrors = "false"
+                    WarningLevel = "4"
+                />
+            </Settings>
+            <References>
+                <Reference
+                    Name = "System"
+                    AssemblyName = "System"
+                    HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\System.dll"
+                />
+                <Reference
+                    Name = "System.Data"
+                    AssemblyName = "System.Data"
+                    HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\System.Data.dll"
+                />
+                <Reference
+                    Name = "System.XML"
+                    AssemblyName = "System.Xml"
+                    HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\System.XML.dll"
+                />
+                <Reference
+                    Name = "nunit.framework"
+                    AssemblyName = "nunit.framework"
+                    HintPath = "E:\apps\NUnit V2.1\\bin\nunit.framework.dll"
+                    AssemblyFolderKey = "hklm\dn\nunit.framework"
+                />
+            </References>
+        </Build>
+        <Files>
+            <Include>
+                <File
+                    RelPath = "AssemblyInfo.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "ChecksumImpl.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "CircularBuffer.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "CodecBase.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "Deflater.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "DotZLib.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "GZipStream.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "Inflater.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "UnitTests.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+            </Include>
+        </Files>
+    </CSHARP>
+</VisualStudioProject>
+

contrib/dotzlib/DotZLib/GZipStream.cs

@@ -0,0 +1,301 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.IO;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+	/// <summary>
+	/// Implements a compressed <see cref="Stream"/>, in GZip (.gz) format.
+	/// </summary>
+	public class GZipStream : Stream, IDisposable
+	{
+        #region Dll Imports
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)]
+        private static extern IntPtr gzopen(string name, string mode);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzclose(IntPtr gzFile);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzwrite(IntPtr gzFile, int data, int length);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzread(IntPtr gzFile, int data, int length);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzgetc(IntPtr gzFile);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzputc(IntPtr gzFile, int c);
+
+        #endregion
+
+        #region Private data
+        private IntPtr _gzFile;
+        private bool _isDisposed = false;
+        private bool _isWriting;
+        #endregion
+
+        #region Constructors
+        /// <summary>
+        /// Creates a new file as a writeable GZipStream
+        /// </summary>
+        /// <param name="fileName">The name of the compressed file to create</param>
+        /// <param name="level">The compression level to use when adding data</param>
+        /// <exception cref="ZLibException">If an error occurred in the internal zlib function</exception>
+		public GZipStream(string fileName, CompressLevel level)
+		{
+            _isWriting = true;
+            _gzFile = gzopen(fileName, String.Format("wb{0}", (int)level));
+            if (_gzFile == IntPtr.Zero)
+                throw new ZLibException(-1, "Could not open " + fileName);
+		}
+
+        /// <summary>
+        /// Opens an existing file as a readable GZipStream
+        /// </summary>
+        /// <param name="fileName">The name of the file to open</param>
+        /// <exception cref="ZLibException">If an error occurred in the internal zlib function</exception>
+        public GZipStream(string fileName)
+        {
+            _isWriting = false;
+            _gzFile = gzopen(fileName, "rb");
+            if (_gzFile == IntPtr.Zero)
+                throw new ZLibException(-1, "Could not open " + fileName);
+
+        }
+        #endregion
+
+        #region Access properties
+        /// <summary>
+        /// Returns true of this stream can be read from, false otherwise
+        /// </summary>
+        public override bool CanRead
+        {
+            get
+            {
+                return !_isWriting;
+            }
+        }
+    
+
+        /// <summary>
+        /// Returns false.
+        /// </summary>
+        public override bool CanSeek
+        {
+            get
+            {
+                return false;
+            }
+        }
+    
+        /// <summary>
+        /// Returns true if this tsream is writeable, false otherwise
+        /// </summary>
+        public override bool CanWrite
+        {
+            get
+            {
+                return _isWriting;
+            }
+        }
+        #endregion
+    
+        #region Destructor & IDispose stuff
+
+        /// <summary>
+        /// Destroys this instance
+        /// </summary>
+        ~GZipStream()
+        {
+            cleanUp(false);
+        }
+
+        /// <summary>
+        /// Closes the external file handle
+        /// </summary>
+        public void Dispose()
+        {
+            cleanUp(true);
+        }
+
+        // Does the actual closing of the file handle.
+        private void cleanUp(bool isDisposing)
+        {
+            if (!_isDisposed)
+            {
+                gzclose(_gzFile);
+                _isDisposed = true;
+            }
+        }
+        #endregion
+    
+        #region Basic reading and writing
+        /// <summary>
+        /// Attempts to read a number of bytes from the stream.
+        /// </summary>
+        /// <param name="buffer">The destination data buffer</param>
+        /// <param name="offset">The index of the first destination byte in <c>buffer</c></param>
+        /// <param name="count">The number of bytes requested</param>
+        /// <returns>The number of bytes read</returns>
+        /// <exception cref="ArgumentNullException">If <c>buffer</c> is null</exception>
+        /// <exception cref="ArgumentOutOfRangeException">If <c>count</c> or <c>offset</c> are negative</exception>
+        /// <exception cref="ArgumentException">If <c>offset</c>  + <c>count</c> is &gt; buffer.Length</exception>
+        /// <exception cref="NotSupportedException">If this stream is not readable.</exception>
+        /// <exception cref="ObjectDisposedException">If this stream has been disposed.</exception>
+        public override int Read(byte[] buffer, int offset, int count)
+        {
+            if (!CanRead) throw new NotSupportedException();
+            if (buffer == null) throw new ArgumentNullException();
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > buffer.Length) throw new ArgumentException();
+            if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+
+            GCHandle h = GCHandle.Alloc(buffer, GCHandleType.Pinned);
+            int result;
+            try
+            {
+                result = gzread(_gzFile, h.AddrOfPinnedObject().ToInt32() + offset, count);
+                if (result < 0)
+                    throw new IOException();
+            }
+            finally
+            {
+                h.Free();
+            }
+            return result;
+        }
+
+        /// <summary>
+        /// Attempts to read a single byte from the stream.
+        /// </summary>
+        /// <returns>The byte that was read, or -1 in case of error or End-Of-File</returns>
+        public override int ReadByte()
+        {
+            if (!CanRead) throw new NotSupportedException();
+            if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+            return gzgetc(_gzFile);
+        }
+
+        /// <summary>
+        /// Writes a number of bytes to the stream
+        /// </summary>
+        /// <param name="buffer"></param>
+        /// <param name="offset"></param>
+        /// <param name="count"></param>
+        /// <exception cref="ArgumentNullException">If <c>buffer</c> is null</exception>
+        /// <exception cref="ArgumentOutOfRangeException">If <c>count</c> or <c>offset</c> are negative</exception>
+        /// <exception cref="ArgumentException">If <c>offset</c>  + <c>count</c> is &gt; buffer.Length</exception>
+        /// <exception cref="NotSupportedException">If this stream is not writeable.</exception>
+        /// <exception cref="ObjectDisposedException">If this stream has been disposed.</exception>
+        public override void Write(byte[] buffer, int offset, int count)
+        {
+            if (!CanWrite) throw new NotSupportedException();
+            if (buffer == null) throw new ArgumentNullException();
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > buffer.Length) throw new ArgumentException();
+            if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+
+            GCHandle h = GCHandle.Alloc(buffer, GCHandleType.Pinned);
+            try
+            {
+                int result = gzwrite(_gzFile, h.AddrOfPinnedObject().ToInt32() + offset, count);
+                if (result < 0)
+                    throw new IOException();
+            }
+            finally
+            {
+                h.Free();
+            }
+        }
+
+        /// <summary>
+        /// Writes a single byte to the stream
+        /// </summary>
+        /// <param name="value">The byte to add to the stream.</param>
+        /// <exception cref="NotSupportedException">If this stream is not writeable.</exception>
+        /// <exception cref="ObjectDisposedException">If this stream has been disposed.</exception>
+        public override void WriteByte(byte value)
+        {
+            if (!CanWrite) throw new NotSupportedException();
+            if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+
+            int result = gzputc(_gzFile, (int)value);
+            if (result < 0)
+                throw new IOException();
+        }
+        #endregion
+
+        #region Position & length stuff
+        /// <summary>
+        /// Not supported.
+        /// </summary>
+        /// <param name="value"></param>
+        /// <exception cref="NotSupportedException">Always thrown</exception>
+        public override void SetLength(long value)
+        {
+            throw new NotSupportedException();
+        }
+    
+        /// <summary>
+        ///  Not suppported.
+        /// </summary>
+        /// <param name="offset"></param>
+        /// <param name="origin"></param>
+        /// <returns></returns>
+        /// <exception cref="NotSupportedException">Always thrown</exception>
+        public override long Seek(long offset, SeekOrigin origin)
+        {
+            throw new NotSupportedException();
+        }
+    
+        /// <summary>
+        /// Flushes the <c>GZipStream</c>.
+        /// </summary>
+        /// <remarks>In this implementation, this method does nothing. This is because excessive
+        /// flushing may degrade the achievable compression rates.</remarks>
+        public override void Flush()
+        {
+            // left empty on purpose
+        }
+    
+        /// <summary>
+        /// Gets/sets the current position in the <c>GZipStream</c>. Not suppported.
+        /// </summary>
+        /// <remarks>In this implementation this property is not supported</remarks>
+        /// <exception cref="NotSupportedException">Always thrown</exception>
+        public override long Position
+        {
+            get
+            {
+                throw new NotSupportedException();
+            }
+            set
+            {
+                throw new NotSupportedException();
+            }
+        }
+    
+        /// <summary>
+        /// Gets the size of the stream. Not suppported.
+        /// </summary>
+        /// <remarks>In this implementation this property is not supported</remarks>
+        /// <exception cref="NotSupportedException">Always thrown</exception>
+        public override long Length
+        {
+            get
+            {
+                throw new NotSupportedException();
+            }
+        }
+        #endregion
+    }
+}

contrib/dotzlib/DotZLib/Inflater.cs

@@ -0,0 +1,105 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Diagnostics;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+    
+    /// <summary>
+    /// Implements a data decompressor, using the inflate algorithm in the ZLib dll
+    /// </summary>
+    public class Inflater : CodecBase
+	{
+        #region Dll imports
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)]
+        private static extern int inflateInit_(ref ZStream sz, string vs, int size);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int inflate(ref ZStream sz, int flush);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int inflateReset(ref ZStream sz);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int inflateEnd(ref ZStream sz);
+        #endregion
+
+        /// <summary>
+        /// Constructs an new instance of the <c>Inflater</c>
+        /// </summary>
+        public Inflater() : base()
+		{
+            int retval = inflateInit_(ref _ztream, Info.Version, Marshal.SizeOf(_ztream));
+            if (retval != 0)
+                throw new ZLibException(retval, "Could not initialize inflater");
+
+            resetOutput();
+        }
+
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+        /// <param name="count">The number of bytes to add</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        public override void Add(byte[] data, int offset, int count)
+        {
+            if (data == null) throw new ArgumentNullException();
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > data.Length) throw new ArgumentException();
+
+            int total = count;
+            int inputIndex = offset;
+            int err = 0;
+
+            while (err >= 0 && inputIndex < total)
+            {
+                copyInput(data, inputIndex, Math.Min(total - inputIndex, kBufferSize));
+                err = inflate(ref _ztream, (int)FlushTypes.None);
+                if (err == 0)
+                    while (_ztream.avail_out == 0)
+                    {
+                        OnDataAvailable();
+                        err = inflate(ref _ztream, (int)FlushTypes.None);
+                    }
+
+                inputIndex += (int)_ztream.total_in;
+            }
+            setChecksum( _ztream.adler );
+        }
+
+
+        /// <summary>
+        /// Finishes up any pending data that needs to be processed and handled.
+        /// </summary>
+        public override void Finish()
+        {
+            int err;
+            do 
+            {
+                err = inflate(ref _ztream, (int)FlushTypes.Finish);
+                OnDataAvailable();
+            }
+            while (err == 0);
+            setChecksum( _ztream.adler );
+            inflateReset(ref _ztream);
+            resetOutput();
+        }
+
+        /// <summary>
+        /// Closes the internal zlib inflate stream
+        /// </summary>
+        protected override void CleanUp() { inflateEnd(ref _ztream); }
+
+
+	}
+}

contrib/dotzlib/DotZLib/UnitTests.cs

@@ -0,0 +1,274 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Collections;
+using System.IO;
+
+// uncomment the define below to include unit tests
+//#define nunit
+#if nunit
+using NUnit.Framework;
+
+// Unit tests for the DotZLib class library
+// ----------------------------------------
+//
+// Use this with NUnit 2 from http://www.nunit.org
+//
+
+namespace DotZLibTests
+{
+    using DotZLib;
+
+    // helper methods
+    internal class Utils
+    {
+        public static bool byteArrEqual( byte[] lhs, byte[] rhs )
+        {
+            if (lhs.Length != rhs.Length)
+                return false;
+            for (int i = lhs.Length-1; i >= 0; --i)
+                if (lhs[i] != rhs[i])
+                    return false;
+            return true;
+        }
+
+    }
+
+
+    [TestFixture]
+    public class CircBufferTests
+    {
+        #region Circular buffer tests
+        [Test]
+        public void SinglePutGet()
+        {
+            CircularBuffer buf = new CircularBuffer(10);
+            Assert.AreEqual( 0, buf.Size );
+            Assert.AreEqual( -1, buf.Get() );
+
+            Assert.IsTrue(buf.Put( 1 ));
+            Assert.AreEqual( 1, buf.Size );
+            Assert.AreEqual( 1, buf.Get() );
+            Assert.AreEqual( 0, buf.Size );
+            Assert.AreEqual( -1, buf.Get() );
+        }
+
+        [Test]
+        public void BlockPutGet()
+        {
+            CircularBuffer buf = new CircularBuffer(10);
+            byte[] arr = {1,2,3,4,5,6,7,8,9,10};
+            Assert.AreEqual( 10, buf.Put(arr,0,10) );
+            Assert.AreEqual( 10, buf.Size );
+            Assert.IsFalse( buf.Put(11) );
+            Assert.AreEqual( 1, buf.Get() );
+            Assert.IsTrue( buf.Put(11) );
+
+            byte[] arr2 = (byte[])arr.Clone();
+            Assert.AreEqual( 9, buf.Get(arr2,1,9) );
+            Assert.IsTrue( Utils.byteArrEqual(arr,arr2) );
+        }
+
+        #endregion
+    }
+
+    [TestFixture]
+    public class ChecksumTests
+    {
+        #region CRC32 Tests
+        [Test]
+        public void CRC32_Null()
+        {
+            CRC32Checksum crc32 = new CRC32Checksum();
+            Assert.AreEqual( 0, crc32.Value );
+
+            crc32 = new CRC32Checksum(1);
+            Assert.AreEqual( 1, crc32.Value );
+
+            crc32 = new CRC32Checksum(556);
+            Assert.AreEqual( 556, crc32.Value );
+        }
+
+        [Test]
+        public void CRC32_Data()
+        {
+            CRC32Checksum crc32 = new CRC32Checksum();
+            byte[] data = { 1,2,3,4,5,6,7 };
+            crc32.Update(data);
+            Assert.AreEqual( 0x70e46888, crc32.Value  );
+
+            crc32 = new CRC32Checksum();
+            crc32.Update("penguin");
+            Assert.AreEqual( 0x0e5c1a120, crc32.Value );
+
+            crc32 = new CRC32Checksum(1);
+            crc32.Update("penguin");
+            Assert.AreEqual(0x43b6aa94, crc32.Value);
+
+        }
+        #endregion
+
+        #region Adler tests
+
+        [Test]
+        public void Adler_Null()
+        {
+            AdlerChecksum adler = new AdlerChecksum();
+            Assert.AreEqual(0, adler.Value);
+
+            adler = new AdlerChecksum(1);
+            Assert.AreEqual( 1, adler.Value );
+
+            adler = new AdlerChecksum(556);
+            Assert.AreEqual( 556, adler.Value );
+        }
+
+        [Test]
+        public void Adler_Data()
+        {
+            AdlerChecksum adler = new AdlerChecksum(1);
+            byte[] data = { 1,2,3,4,5,6,7 };
+            adler.Update(data);
+            Assert.AreEqual( 0x5b001d, adler.Value  );
+
+            adler = new AdlerChecksum();
+            adler.Update("penguin");
+            Assert.AreEqual(0x0bcf02f6, adler.Value );
+
+            adler = new AdlerChecksum(1);
+            adler.Update("penguin");
+            Assert.AreEqual(0x0bd602f7, adler.Value);
+
+        }
+        #endregion
+    }
+
+    [TestFixture]
+    public class InfoTests
+    {
+        #region Info tests
+        [Test]
+        public void Info_Version()
+        {
+            Info info = new Info();
+            Assert.AreEqual("1.2.3", Info.Version);
+            Assert.AreEqual(32, info.SizeOfUInt);
+            Assert.AreEqual(32, info.SizeOfULong);
+            Assert.AreEqual(32, info.SizeOfPointer);
+            Assert.AreEqual(32, info.SizeOfOffset);
+        }
+        #endregion
+    }
+
+    [TestFixture]
+    public class DeflateInflateTests
+    {
+        #region Deflate tests
+        [Test]
+        public void Deflate_Init()
+        {
+            using (Deflater def = new Deflater(CompressLevel.Default))
+            {
+            }
+        }
+
+        private ArrayList compressedData = new ArrayList();
+        private uint adler1;
+
+        private ArrayList uncompressedData = new ArrayList();
+        private uint adler2;
+
+        public void CDataAvail(byte[] data, int startIndex, int count)
+        {
+            for (int i = 0; i < count; ++i)
+                compressedData.Add(data[i+startIndex]);
+        }
+
+        [Test]
+        public void Deflate_Compress()
+        {
+            compressedData.Clear();
+
+            byte[] testData = new byte[35000];
+            for (int i = 0; i < testData.Length; ++i)
+                testData[i] = 5;
+
+            using (Deflater def = new Deflater((CompressLevel)5))
+            {
+                def.DataAvailable += new DataAvailableHandler(CDataAvail);
+                def.Add(testData);
+                def.Finish();
+                adler1 = def.Checksum;
+            }
+        }
+        #endregion
+
+        #region Inflate tests
+        [Test]
+        public void Inflate_Init()
+        {
+            using (Inflater inf = new Inflater())
+            {
+            }
+        }
+
+        private void DDataAvail(byte[] data, int startIndex, int count)
+        {
+            for (int i = 0; i < count; ++i)
+                uncompressedData.Add(data[i+startIndex]);
+        }
+
+        [Test]
+        public void Inflate_Expand()
+        { 
+            uncompressedData.Clear();
+
+            using (Inflater inf = new Inflater())
+            {
+                inf.DataAvailable += new DataAvailableHandler(DDataAvail);
+                inf.Add((byte[])compressedData.ToArray(typeof(byte)));
+                inf.Finish();
+                adler2 = inf.Checksum;
+            }
+            Assert.AreEqual( adler1, adler2 );
+        }
+        #endregion
+    }
+
+    [TestFixture]
+    public class GZipStreamTests
+    {
+        #region GZipStream test
+        [Test]
+        public void GZipStream_WriteRead()
+        {
+            using (GZipStream gzOut = new GZipStream("gzstream.gz", CompressLevel.Best))
+            {
+                BinaryWriter writer = new BinaryWriter(gzOut);
+                writer.Write("hi there");
+                writer.Write(Math.PI);
+                writer.Write(42);
+            }
+
+            using (GZipStream gzIn = new GZipStream("gzstream.gz"))
+            {
+                BinaryReader reader = new BinaryReader(gzIn);
+                string s = reader.ReadString();
+                Assert.AreEqual("hi there",s);
+                double d = reader.ReadDouble();
+                Assert.AreEqual(Math.PI, d);
+                int i = reader.ReadInt32();
+                Assert.AreEqual(42,i);
+            }
+
+        }
+        #endregion
+	}
+}
+
+#endif

contrib/dotzlib/LICENSE_1_0.txt

@@ -0,0 +1,23 @@
+Boost Software License - Version 1.0 - August 17th, 2003
+
+Permission is hereby granted, free of charge, to any person or organization
+obtaining a copy of the software and accompanying documentation covered by
+this license (the "Software") to use, reproduce, display, distribute,
+execute, and transmit the Software, and to prepare derivative works of the
+Software, and to permit third-parties to whom the Software is furnished to
+do so, all subject to the following:
+
+The copyright notices in the Software and this entire statement, including
+the above license grant, this restriction and the following disclaimer,
+must be included in all copies of the Software, in whole or in part, and
+all derivative works of the Software, unless such copies or derivative
+works are solely in the form of machine-executable object code generated by
+a source language processor.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT
+SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE
+FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE,
+ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+DEALINGS IN THE SOFTWARE.

contrib/dotzlib/readme.txt

@@ -0,0 +1,58 @@
+This directory contains a .Net wrapper class library for the ZLib1.dll
+
+The wrapper includes support for inflating/deflating memory buffers, 
+.Net streaming wrappers for the gz streams part of zlib, and wrappers
+for the checksum parts of zlib. See DotZLib/UnitTests.cs for examples.
+
+Directory structure:
+--------------------
+
+LICENSE_1_0.txt       - License file.
+readme.txt            - This file.
+DotZLib.chm           - Class library documentation
+DotZLib.build         - NAnt build file
+DotZLib.sln           - Microsoft Visual Studio 2003 solution file
+
+DotZLib\*.cs          - Source files for the class library
+
+Unit tests:
+-----------
+The file DotZLib/UnitTests.cs contains unit tests for use with NUnit 2.1 or higher.
+To include unit tests in the build, define nunit before building.
+
+
+Build instructions:
+-------------------
+
+1. Using Visual Studio.Net 2003:
+   Open DotZLib.sln in VS.Net and build from there. Output file (DotZLib.dll)
+   will be found ./DotZLib/bin/release or ./DotZLib/bin/debug, depending on 
+   you are building the release or debug version of the library. Check 
+   DotZLib/UnitTests.cs for instructions on how to include unit tests in the
+   build.
+   
+2. Using NAnt:
+   Open a command prompt with access to the build environment and run nant
+   in the same directory as the DotZLib.build file.
+   You can define 2 properties on the nant command-line to control the build:
+   debug={true|false} to toggle between release/debug builds (default=true).
+   nunit={true|false} to include or esclude unit tests (default=true).
+   Also the target clean will remove binaries.
+   Output file (DotZLib.dll) will be found in either ./DotZLib/bin/release 
+   or ./DotZLib/bin/debug, depending on whether you are building the release 
+   or debug version of the library.
+
+   Examples: 
+     nant -D:debug=false -D:nunit=false
+       will build a release mode version of the library without unit tests.
+     nant
+       will build a debug version of the library with unit tests 
+     nant clean
+       will remove all previously built files.
+
+
+---------------------------------
+Copyright (c) Henrik Ravn 2004
+
+Use, modification and distribution are subject to the Boost Software License, Version 1.0. 
+(See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)

contrib/infback9/infback9.c

@@ -430,6 +430,9 @@ void FAR *out_desc;
                 }
             }
 
+            /* handle error breaks in while */
+            if (mode == BAD) break;
+
             /* build code tables */
             state->next = state->codes;
             lencode = (code const FAR *)(state->next);

contrib/infback9/infback9.h

@@ -16,6 +16,10 @@
  * zlib.h must be included before this header file.
  */
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 ZEXTERN int ZEXPORT inflateBack9 OF((z_stream FAR *strm,
                                     in_func in, void FAR *in_desc,
                                     out_func out, void FAR *out_desc));
@@ -27,3 +31,7 @@ ZEXTERN int ZEXPORT inflateBack9Init_ OF((z_stream FAR *strm,
 #define inflateBack9Init(strm, window) \
         inflateBack9Init_((strm), (window), \
         ZLIB_VERSION, sizeof(z_stream))
+
+#ifdef __cplusplus
+}
+#endif

contrib/infback9/inftree9.c

@@ -1,5 +1,5 @@
 /* inftree9.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2005 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -9,7 +9,7 @@
 #define MAXBITS 15
 
 const char inflate9_copyright[] =
-   " inflate9 1.2.1 Copyright 1995-2003 Mark Adler ";
+   " inflate9 1.2.3.1 Copyright 1995-2005 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -64,7 +64,7 @@ unsigned short FAR *work;
     static const unsigned short lext[31] = { /* Length codes 257..285 extra */
         128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
         130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
-        133, 133, 133, 133, 144, 76, 66};
+        133, 133, 133, 133, 144, 74, 196};
     static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
         65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,
@@ -128,7 +128,7 @@ unsigned short FAR *work;
         left -= count[len];
         if (left < 0) return -1;        /* over-subscribed */
     }
-    if (left > 0 && (type == CODES || (codes - count[0] != 1)))
+    if (left > 0 && (type == CODES || max != 1))
         return -1;                      /* incomplete set */
 
     /* generate offsets into symbol table for each length for sorting */

contrib/infback9/inftree9.h

@@ -36,12 +36,12 @@ typedef struct {
  */
 
 /* Maximum size of dynamic tree.  The maximum found in a long but non-
-   exhaustive search was 1004 code structures (850 for length/literals
+   exhaustive search was 1444 code structures (852 for length/literals
-   and 154 for distances, the latter actually the result of an
+   and 592 for distances, the latter actually the result of an
    exhaustive search).  The true maximum is not known, but the value
    below is more than safe. */
-#define ENOUGH 1440
+#define ENOUGH 2048
-#define MAXD 154
+#define MAXD 592
 
 /* Type of code to build for inftable() */
 typedef enum {

contrib/inflate86/inffast.S

@@ -188,17 +188,8 @@
 /*
  * typedef enum inflate_mode consts, in inflate.h
  */
-#ifndef NO_GUNZIP
-#define GUNZIP
-#endif
-
-#ifdef GUNZIP
 #define INFLATE_MODE_TYPE 11  /* state->mode flags enum-ed in inflate.h */
 #define INFLATE_MODE_BAD  26
-#else
-#define INFLATE_MODE_TYPE 3
-#define INFLATE_MODE_BAD  17
-#endif
 
 
 #if ! defined( USE_MMX ) && ! defined( NO_MMX )

contrib/masm686/match.asm

@@ -12,6 +12,8 @@
 ; Based on match.S
 ; Written for zlib 1.1.2
 ; Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
+;
+; Modified by Gilles Vollant (2005) for add gzhead and gzindex
 
 	.686P
 	.MODEL	FLAT
@@ -39,6 +41,9 @@ ds_pending_buf_size	dd ?
 ds_pending_out		dd ?
 ds_pending		dd ?
 ds_wrap			dd ?
+; gzhead and gzindex are added in zlib 1.2.2.2 (see deflate.h)
+ds_gzhead               dd ?
+ds_gzindex              dd ?
 ds_data_type		db ?
 ds_method		db ?
 			db ?	; padding

contrib/masmx64/bld_ml64.bat

@@ -0,0 +1,2 @@
+ml64.exe /Flinffasx64 /c /Zi inffasx64.asm
+ml64.exe /Flgvmat64   /c /Zi gvmat64.asm

contrib/masmx64/gvmat64.asm

@@ -0,0 +1,513 @@
+;uInt longest_match_x64(
+;    deflate_state *s,
+;    IPos cur_match);                             /* current match */
+
+; gvmat64.asm -- Asm portion of the optimized longest_match for 32 bits x86
+; Copyright (C) 1995-2005 Jean-loup Gailly, Brian Raiter and Gilles Vollant.
+;
+; File written by Gilles Vollant, by converting to assembly the longest_match
+;  from Jean-loup Gailly in deflate.c of zLib and infoZip zip.
+;
+;  and by taking inspiration on asm686 with masm, optimised assembly code
+;        from Brian Raiter, written 1998
+;
+;         http://www.zlib.net
+;         http://www.winimage.com/zLibDll
+;         http://www.muppetlabs.com/~breadbox/software/assembly.html
+;
+; to compile this file for infozip Zip, I use option:
+;   ml64.exe /Flgvmat64 /c /Zi /DINFOZIP gvmat64.asm
+;
+; to compile this file for zLib, I use option:
+;   ml64.exe /Flgvmat64 /c /Zi gvmat64.asm
+; Be carrefull to adapt zlib1222add below to your version of zLib
+;   (if you use a version of zLib before 1.0.4 or after 1.2.2.2, change
+;    value of zlib1222add later)
+;
+; This file compile with Microsoft Macro Assembler (x64) for AMD64
+;
+;   ml64.exe is given with Visual Studio 2005 and Windows 2003 server DDK
+;
+;   (you can get Windows 2003 server DDK with ml64 and cl for AMD64 from
+;      http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price)
+;
+
+
+;uInt longest_match(s, cur_match)
+;    deflate_state *s;
+;    IPos cur_match;                             /* current match */
+.code
+longest_match PROC
+
+
+;LocalVarsSize   equ 88
+ LocalVarsSize   equ 72
+
+; register used : rax,rbx,rcx,rdx,rsi,rdi,r8,r9,r10,r11,r12
+; free register :  r14,r15
+; register can be saved : rsp
+
+ chainlenwmask   equ  rsp + 8 - LocalVarsSize    ; high word: current chain len
+                                                 ; low word: s->wmask
+;window          equ  rsp + xx - LocalVarsSize   ; local copy of s->window ; stored in r10
+;windowbestlen   equ  rsp + xx - LocalVarsSize   ; s->window + bestlen , use r10+r11
+;scanstart       equ  rsp + xx - LocalVarsSize   ; first two bytes of string ; stored in r12w
+;scanend         equ  rsp + xx - LocalVarsSize   ; last two bytes of string use ebx
+;scanalign       equ  rsp + xx - LocalVarsSize   ; dword-misalignment of string r13
+;bestlen         equ  rsp + xx - LocalVarsSize   ; size of best match so far -> r11d
+;scan            equ  rsp + xx - LocalVarsSize   ; ptr to string wanting match -> r9
+IFDEF INFOZIP
+ELSE
+ nicematch       equ  (rsp + 16 - LocalVarsSize) ; a good enough match size
+ENDIF
+
+save_rdi        equ  rsp + 24 - LocalVarsSize
+save_rsi        equ  rsp + 32 - LocalVarsSize
+save_rbx        equ  rsp + 40 - LocalVarsSize
+save_rbp        equ  rsp + 48 - LocalVarsSize
+save_r12        equ  rsp + 56 - LocalVarsSize
+save_r13        equ  rsp + 64 - LocalVarsSize
+;save_r14        equ  rsp + 72 - LocalVarsSize
+;save_r15        equ  rsp + 80 - LocalVarsSize
+
+
+
+;  all the +4 offsets are due to the addition of pending_buf_size (in zlib
+;  in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, remove the +4).
+;  Note : these value are good with a 8 bytes boundary pack structure
+
+
+    MAX_MATCH           equ     258
+    MIN_MATCH           equ     3
+    MIN_LOOKAHEAD       equ     (MAX_MATCH+MIN_MATCH+1)
+
+
+;;; Offsets for fields in the deflate_state structure. These numbers
+;;; are calculated from the definition of deflate_state, with the
+;;; assumption that the compiler will dword-align the fields. (Thus,
+;;; changing the definition of deflate_state could easily cause this
+;;; program to crash horribly, without so much as a warning at
+;;; compile time. Sigh.)
+
+;  all the +zlib1222add offsets are due to the addition of fields
+;  in zlib in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+;  (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+;  if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
+
+
+IFDEF INFOZIP
+
+_DATA   SEGMENT
+COMM    window_size:DWORD
+; WMask ; 7fff
+COMM    window:BYTE:010040H
+COMM    prev:WORD:08000H
+; MatchLen : unused
+; PrevMatch : unused
+COMM    strstart:DWORD
+COMM    match_start:DWORD
+; Lookahead : ignore
+COMM    prev_length:DWORD ; PrevLen
+COMM    max_chain_length:DWORD
+COMM    good_match:DWORD
+COMM    nice_match:DWORD
+prev_ad equ OFFSET prev
+window_ad equ OFFSET window
+nicematch equ nice_match
+_DATA ENDS
+WMask equ 07fffh
+
+ELSE
+
+  IFNDEF zlib1222add
+    zlib1222add equ 8
+  ENDIF
+dsWSize         equ 56+zlib1222add+(zlib1222add/2)
+dsWMask         equ 64+zlib1222add+(zlib1222add/2)
+dsWindow        equ 72+zlib1222add
+dsPrev          equ 88+zlib1222add
+dsMatchLen      equ 128+zlib1222add
+dsPrevMatch     equ 132+zlib1222add
+dsStrStart      equ 140+zlib1222add
+dsMatchStart    equ 144+zlib1222add
+dsLookahead     equ 148+zlib1222add
+dsPrevLen       equ 152+zlib1222add
+dsMaxChainLen   equ 156+zlib1222add
+dsGoodMatch     equ 172+zlib1222add
+dsNiceMatch     equ 176+zlib1222add
+
+window_size     equ [ rcx + dsWSize]
+WMask           equ [ rcx + dsWMask]
+window_ad       equ [ rcx + dsWindow]
+prev_ad         equ [ rcx + dsPrev]
+strstart        equ [ rcx + dsStrStart]
+match_start     equ [ rcx + dsMatchStart]
+Lookahead       equ [ rcx + dsLookahead] ; 0ffffffffh on infozip
+prev_length     equ [ rcx + dsPrevLen]
+max_chain_length equ [ rcx + dsMaxChainLen]
+good_match      equ [ rcx + dsGoodMatch]
+nice_match      equ [ rcx + dsNiceMatch]
+ENDIF
+
+; parameter 1 in r8(deflate state s), param 2 in rdx (cur match)
+
+; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and
+; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp
+;
+; All registers must be preserved across the call, except for
+;   rax, rcx, rdx, r8, r9, r10, and r11, which are scratch.
+
+
+
+;;; Save registers that the compiler may be using, and adjust esp to
+;;; make room for our stack frame.
+
+
+;;; Retrieve the function arguments. r8d will hold cur_match
+;;; throughout the entire function. edx will hold the pointer to the
+;;; deflate_state structure during the function's setup (before
+;;; entering the main loop.
+
+; parameter 1 in rcx (deflate_state* s), param 2 in edx -> r8 (cur match)
+
+; this clear high 32 bits of r8, which can be garbage in both r8 and rdx
+
+        mov [save_rdi],rdi
+        mov [save_rsi],rsi
+        mov [save_rbx],rbx
+        mov [save_rbp],rbp
+IFDEF INFOZIP
+        mov r8d,ecx
+ELSE
+        mov r8d,edx
+ENDIF
+        mov [save_r12],r12
+        mov [save_r13],r13
+;        mov [save_r14],r14
+;        mov [save_r15],r15
+
+
+;;; uInt wmask = s->w_mask;
+;;; unsigned chain_length = s->max_chain_length;
+;;; if (s->prev_length >= s->good_match) {
+;;;     chain_length >>= 2;
+;;; }
+
+        mov edi, prev_length
+        mov esi, good_match
+        mov eax, WMask
+        mov ebx, max_chain_length
+        cmp edi, esi
+        jl  LastMatchGood
+        shr ebx, 2
+LastMatchGood:
+
+;;; chainlen is decremented once beforehand so that the function can
+;;; use the sign flag instead of the zero flag for the exit test.
+;;; It is then shifted into the high word, to make room for the wmask
+;;; value, which it will always accompany.
+
+        dec ebx
+        shl ebx, 16
+        or  ebx, eax
+
+;;; on zlib only
+;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+IFDEF INFOZIP
+        mov [chainlenwmask], ebx
+; on infozip nice_match = [nice_match]
+ELSE
+        mov eax, nice_match
+        mov [chainlenwmask], ebx
+        mov r10d, Lookahead
+        cmp r10d, eax
+        cmovnl r10d, eax
+        mov [nicematch],r10d
+ENDIF
+
+;;; register Bytef *scan = s->window + s->strstart;
+        mov r10, window_ad
+        mov ebp, strstart
+        lea r13, [r10 + rbp]
+
+;;; Determine how many bytes the scan ptr is off from being
+;;; dword-aligned.
+
+         mov r9,r13
+         neg r13
+         and r13,3
+
+;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+;;;     s->strstart - (IPos)MAX_DIST(s) : NIL;
+IFDEF INFOZIP
+        mov eax,07efah ; MAX_DIST = (WSIZE-MIN_LOOKAHEAD) (0x8000-(3+8+1))
+ELSE
+        mov eax, window_size
+        sub eax, MIN_LOOKAHEAD
+ENDIF
+        xor edi,edi
+        sub ebp, eax
+
+        mov r11d, prev_length
+
+        cmovng ebp,edi
+
+;;; int best_len = s->prev_length;
+
+
+;;; Store the sum of s->window + best_len in esi locally, and in esi.
+
+       lea  rsi,[r10+r11]
+
+;;; register ush scan_start = *(ushf*)scan;
+;;; register ush scan_end   = *(ushf*)(scan+best_len-1);
+;;; Posf *prev = s->prev;
+
+        movzx r12d,word ptr [r9]
+        movzx ebx, word ptr [r9 + r11 - 1]
+
+        mov rdi, prev_ad
+
+;;; Jump into the main loop.
+
+        mov edx, [chainlenwmask]
+
+        cmp bx,word ptr [rsi + r8 - 1]
+        jz  LookupLoopIsZero
+
+LookupLoop1:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+
+LoopEntry1:
+        cmp bx,word ptr [rsi + r8 - 1]
+        jz  LookupLoopIsZero
+
+LookupLoop2:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+
+LoopEntry2:
+        cmp bx,word ptr [rsi + r8 - 1]
+        jz  LookupLoopIsZero
+
+LookupLoop4:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+
+LoopEntry4:
+
+        cmp bx,word ptr [rsi + r8 - 1]
+        jnz LookupLoop1
+        jmp LookupLoopIsZero
+
+
+;;; do {
+;;;     match = s->window + cur_match;
+;;;     if (*(ushf*)(match+best_len-1) != scan_end ||
+;;;         *(ushf*)match != scan_start) continue;
+;;;     [...]
+;;; } while ((cur_match = prev[cur_match & wmask]) > limit
+;;;          && --chain_length != 0);
+;;;
+;;; Here is the inner loop of the function. The function will spend the
+;;; majority of its time in this loop, and majority of that time will
+;;; be spent in the first ten instructions.
+;;;
+;;; Within this loop:
+;;; ebx = scanend
+;;; r8d = curmatch
+;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
+;;; esi = windowbestlen - i.e., (window + bestlen)
+;;; edi = prev
+;;; ebp = limit
+
+LookupLoop:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+
+LoopEntry:
+
+        cmp bx,word ptr [rsi + r8 - 1]
+        jnz LookupLoop1
+LookupLoopIsZero:
+        cmp     r12w, word ptr [r10 + r8]
+        jnz LookupLoop1
+
+
+;;; Store the current value of chainlen.
+        mov [chainlenwmask], edx
+
+;;; Point edi to the string under scrutiny, and esi to the string we
+;;; are hoping to match it up with. In actuality, esi and edi are
+;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is
+;;; initialized to -(MAX_MATCH_8 - scanalign).
+
+        lea rsi,[r8+r10]
+        mov rdx, 0fffffffffffffef8h; -(MAX_MATCH_8)
+        lea rsi, [rsi + r13 + 0108h] ;MAX_MATCH_8]
+        lea rdi, [r9 + r13 + 0108h] ;MAX_MATCH_8]
+
+        prefetcht1 [rsi+rdx]
+        prefetcht1 [rdi+rdx]
+
+
+;;; Test the strings for equality, 8 bytes at a time. At the end,
+;;; adjust rdx so that it is offset to the exact byte that mismatched.
+;;;
+;;; We already know at this point that the first three bytes of the
+;;; strings match each other, and they can be safely passed over before
+;;; starting the compare loop. So what this code does is skip over 0-3
+;;; bytes, as much as necessary in order to dword-align the edi
+;;; pointer. (rsi will still be misaligned three times out of four.)
+;;;
+;;; It should be confessed that this loop usually does not represent
+;;; much of the total running time. Replacing it with a more
+;;; straightforward "rep cmpsb" would not drastically degrade
+;;; performance.
+
+
+LoopCmps:
+        mov rax, [rsi + rdx]
+        xor rax, [rdi + rdx]
+        jnz LeaveLoopCmps
+
+        mov rax, [rsi + rdx + 8]
+        xor rax, [rdi + rdx + 8]
+        jnz LeaveLoopCmps8
+
+
+        mov rax, [rsi + rdx + 8+8]
+        xor rax, [rdi + rdx + 8+8]
+        jnz LeaveLoopCmps16
+
+        add rdx,8+8+8
+
+        jmp short LoopCmps
+LeaveLoopCmps16: add rdx,8
+LeaveLoopCmps8: add rdx,8
+LeaveLoopCmps:
+
+        test    eax, 0000FFFFh
+        jnz LenLower
+
+        test eax,0ffffffffh
+
+        jnz LenLower32
+
+        add rdx,4
+        shr rax,32
+        or ax,ax
+        jnz LenLower
+
+LenLower32:
+        shr eax,16
+        add rdx,2
+LenLower:   sub al, 1
+        adc rdx, 0
+;;; Calculate the length of the match. If it is longer than MAX_MATCH,
+;;; then automatically accept it as the best possible match and leave.
+
+        lea rax, [rdi + rdx]
+        sub rax, r9
+        cmp eax, MAX_MATCH
+        jge LenMaximum
+
+;;; If the length of the match is not longer than the best match we
+;;; have so far, then forget it and return to the lookup loop.
+;///////////////////////////////////
+
+        cmp eax, r11d
+        jg  LongerMatch
+
+        lea rsi,[r10+r11]
+
+        mov rdi, prev_ad
+        mov edx, [chainlenwmask]
+        jmp LookupLoop
+
+;;;         s->match_start = cur_match;
+;;;         best_len = len;
+;;;         if (len >= nice_match) break;
+;;;         scan_end = *(ushf*)(scan+best_len-1);
+
+LongerMatch:
+        mov r11d, eax
+        mov match_start, r8d
+        cmp eax, [nicematch]
+        jge LeaveNow
+
+        lea rsi,[r10+rax]
+
+        movzx   ebx, word ptr [r9 + rax - 1]
+        mov rdi, prev_ad
+        mov edx, [chainlenwmask]
+        jmp LookupLoop
+
+;;; Accept the current string, with the maximum possible length.
+
+LenMaximum:
+        mov r11d,MAX_MATCH
+        mov match_start, r8d
+
+;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+;;; return s->lookahead;
+
+LeaveNow:
+IFDEF INFOZIP
+        mov eax,r11d
+ELSE
+        mov eax, Lookahead
+        cmp r11d, eax
+        cmovng eax, r11d
+ENDIF
+
+;;; Restore the stack and return from whence we came.
+
+
+        mov rsi,[save_rsi]
+        mov rdi,[save_rdi]
+        mov rbx,[save_rbx]
+        mov rbp,[save_rbp]
+        mov r12,[save_r12]
+        mov r13,[save_r13]
+;        mov r14,[save_r14]
+;        mov r15,[save_r15]
+
+
+        ret 0
+; please don't remove this string !
+; Your can freely use gvmat64 in any free or commercial app
+; but it is far better don't remove the string in the binary!
+    db     0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998, converted to amd 64 by Gilles Vollant 2005",0dh,0ah,0
+longest_match   ENDP
+
+match_init PROC
+  ret 0
+match_init ENDP
+
+
+END

contrib/masmx64/inffas8664.c

@@ -0,0 +1,186 @@
+/* inffas8664.c is a hand tuned assembler version of inffast.c - fast decoding
+ * version for AMD64 on Windows using Microsoft C compiler
+ *
+ * Copyright (C) 1995-2003 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Copyright (C) 2003 Chris Anderson <christop@charm.net>
+ * Please use the copyright conditions above.
+ *
+ * 2005 - Adaptation to Microsoft C Compiler for AMD64 by Gilles Vollant
+ *
+ * inffas8664.c call function inffas8664fnc in inffasx64.asm
+ *  inffasx64.asm is automatically convert from AMD64 portion of inffas86.c
+ *
+ * Dec-29-2003 -- I added AMD64 inflate asm support.  This version is also
+ * slightly quicker on x86 systems because, instead of using rep movsb to copy
+ * data, it uses rep movsw, which moves data in 2-byte chunks instead of single
+ * bytes.  I've tested the AMD64 code on a Fedora Core 1 + the x86_64 updates
+ * from http://fedora.linux.duke.edu/fc1_x86_64
+ * which is running on an Athlon 64 3000+ / Gigabyte GA-K8VT800M system with
+ * 1GB ram.  The 64-bit version is about 4% faster than the 32-bit version,
+ * when decompressing mozilla-source-1.3.tar.gz.
+ *
+ * Mar-13-2003 -- Most of this is derived from inffast.S which is derived from
+ * the gcc -S output of zlib-1.2.0/inffast.c.  Zlib-1.2.0 is in beta release at
+ * the moment.  I have successfully compiled and tested this code with gcc2.96,
+ * gcc3.2, icc5.0, msvc6.0.  It is very close to the speed of inffast.S
+ * compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX
+ * enabled.  I will attempt to merge the MMX code into this version.  Newer
+ * versions of this and inffast.S can be found at
+ * http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/
+ *
+ */
+
+#include <stdio.h>
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+/* Mark Adler's comments from inffast.c: */
+
+/*
+   Decode literal, length, and distance codes and write out the resulting
+   literal and match bytes until either not enough input or output is
+   available, an end-of-block is encountered, or a data error is encountered.
+   When large enough input and output buffers are supplied to inflate(), for
+   example, a 16K input buffer and a 64K output buffer, more than 95% of the
+   inflate execution time is spent in this routine.
+
+   Entry assumptions:
+
+        state->mode == LEN
+        strm->avail_in >= 6
+        strm->avail_out >= 258
+        start >= strm->avail_out
+        state->bits < 8
+
+   On return, state->mode is one of:
+
+        LEN -- ran out of enough output space or enough available input
+        TYPE -- reached end of block code, inflate() to interpret next block
+        BAD -- error in block data
+
+   Notes:
+
+    - The maximum input bits used by a length/distance pair is 15 bits for the
+      length code, 5 bits for the length extra, 15 bits for the distance code,
+      and 13 bits for the distance extra.  This totals 48 bits, or six bytes.
+      Therefore if strm->avail_in >= 6, then there is enough input to avoid
+      checking for available input while decoding.
+
+    - The maximum bytes that a single length/distance pair can output is 258
+      bytes, which is the maximum length that can be coded.  inflate_fast()
+      requires strm->avail_out >= 258 for each loop to avoid checking for
+      output space.
+ */
+
+
+
+    typedef struct inffast_ar {
+/* 64   32                               x86  x86_64 */
+/* ar offset                              register */
+/*  0    0 */ void *esp;                /* esp save */
+/*  8    4 */ void *ebp;                /* ebp save */
+/* 16    8 */ unsigned char FAR *in;    /* esi rsi  local strm->next_in */
+/* 24   12 */ unsigned char FAR *last;  /*     r9   while in < last */
+/* 32   16 */ unsigned char FAR *out;   /* edi rdi  local strm->next_out */
+/* 40   20 */ unsigned char FAR *beg;   /*          inflate()'s init next_out */
+/* 48   24 */ unsigned char FAR *end;   /*     r10  while out < end */
+/* 56   28 */ unsigned char FAR *window;/*          size of window, wsize!=0 */
+/* 64   32 */ code const FAR *lcode;    /* ebp rbp  local strm->lencode */
+/* 72   36 */ code const FAR *dcode;    /*     r11  local strm->distcode */
+/* 80   40 */ size_t /*unsigned long */hold;       /* edx rdx  local strm->hold */
+/* 88   44 */ unsigned bits;            /* ebx rbx  local strm->bits */
+/* 92   48 */ unsigned wsize;           /*          window size */
+/* 96   52 */ unsigned write;           /*          window write index */
+/*100   56 */ unsigned lmask;           /*     r12  mask for lcode */
+/*104   60 */ unsigned dmask;           /*     r13  mask for dcode */
+/*108   64 */ unsigned len;             /*     r14  match length */
+/*112   68 */ unsigned dist;            /*     r15  match distance */
+/*116   72 */ unsigned status;          /*          set when state chng*/
+    } type_ar;
+#ifdef ASMINF
+
+void inflate_fast(strm, start)
+z_streamp strm;
+unsigned start;         /* inflate()'s starting value for strm->avail_out */
+{
+    struct inflate_state FAR *state;
+    type_ar ar;
+    void inffas8664fnc(struct inffast_ar * par);
+
+    
+
+#if (defined( __GNUC__ ) && defined( __amd64__ ) && ! defined( __i386 )) || (defined(_MSC_VER) && defined(_M_AMD64))
+#define PAD_AVAIL_IN 6
+#define PAD_AVAIL_OUT 258    
+#else
+#define PAD_AVAIL_IN 5
+#define PAD_AVAIL_OUT 257
+#endif
+
+    /* copy state to local variables */
+    state = (struct inflate_state FAR *)strm->state;
+
+    ar.in = strm->next_in;
+    ar.last = ar.in + (strm->avail_in - PAD_AVAIL_IN);
+    ar.out = strm->next_out;
+    ar.beg = ar.out - (start - strm->avail_out);
+    ar.end = ar.out + (strm->avail_out - PAD_AVAIL_OUT);
+    ar.wsize = state->wsize;
+    ar.write = state->write;
+    ar.window = state->window;
+    ar.hold = state->hold;
+    ar.bits = state->bits;
+    ar.lcode = state->lencode;
+    ar.dcode = state->distcode;
+    ar.lmask = (1U << state->lenbits) - 1;
+    ar.dmask = (1U << state->distbits) - 1;
+
+    /* decode literals and length/distances until end-of-block or not enough
+       input data or output space */
+
+    /* align in on 1/2 hold size boundary */
+    while (((size_t)(void *)ar.in & (sizeof(ar.hold) / 2 - 1)) != 0) {
+        ar.hold += (unsigned long)*ar.in++ << ar.bits;
+        ar.bits += 8;
+    }
+
+    inffas8664fnc(&ar);
+
+    if (ar.status > 1) {
+        if (ar.status == 2)
+            strm->msg = "invalid literal/length code";
+        else if (ar.status == 3)
+            strm->msg = "invalid distance code";
+        else
+            strm->msg = "invalid distance too far back";
+        state->mode = BAD;
+    }
+    else if ( ar.status == 1 ) {
+        state->mode = TYPE;
+    }
+
+    /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
+    ar.len = ar.bits >> 3;
+    ar.in -= ar.len;
+    ar.bits -= ar.len << 3;
+    ar.hold &= (1U << ar.bits) - 1;
+
+    /* update state and return */
+    strm->next_in = ar.in;
+    strm->next_out = ar.out;
+    strm->avail_in = (unsigned)(ar.in < ar.last ?
+                                PAD_AVAIL_IN + (ar.last - ar.in) :
+                                PAD_AVAIL_IN - (ar.in - ar.last));
+    strm->avail_out = (unsigned)(ar.out < ar.end ?
+                                 PAD_AVAIL_OUT + (ar.end - ar.out) :
+                                 PAD_AVAIL_OUT - (ar.out - ar.end));
+    state->hold = (unsigned long)ar.hold;
+    state->bits = ar.bits;
+    return;
+}
+
+#endif

contrib/masmx64/inffasx64.asm

@@ -0,0 +1,392 @@
+; inffasx64.asm is a hand tuned assembler version of inffast.c - fast decoding
+; version for AMD64 on Windows using Microsoft C compiler
+;
+; inffasx64.asm is automatically convert from AMD64 portion of inffas86.c
+; inffasx64.asm is called by inffas8664.c, which contain more info.
+
+
+; to compile this file, I use option
+;   ml64.exe /Flinffasx64 /c /Zi inffasx64.asm
+;   with Microsoft Macro Assembler (x64) for AMD64
+;
+;   ml64.exe is given with Visual Studio 2005, Windows 2003 server DDK
+;
+;   (you can get Windows 2003 server DDK with ml64 and cl.exe for AMD64 from 
+;      http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price)
+;
+
+.code
+inffas8664fnc PROC
+
+; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and
+; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp
+;
+; All registers must be preserved across the call, except for
+;   rax, rcx, rdx, r8, r-9, r10, and r11, which are scratch.
+
+
+	mov [rsp-8],rsi
+	mov [rsp-16],rdi
+	mov [rsp-24],r12
+	mov [rsp-32],r13
+	mov [rsp-40],r14
+	mov [rsp-48],r15
+	mov [rsp-56],rbx
+
+	mov rax,rcx
+
+	mov	[rax+8], rbp       ; /* save regs rbp and rsp */
+	mov	[rax], rsp
+
+	mov	rsp, rax          ; /* make rsp point to &ar */
+
+	mov	rsi, [rsp+16]      ; /* rsi  = in */
+	mov	rdi, [rsp+32]      ; /* rdi  = out */
+	mov	r9, [rsp+24]       ; /* r9   = last */
+	mov	r10, [rsp+48]      ; /* r10  = end */
+	mov	rbp, [rsp+64]      ; /* rbp  = lcode */
+	mov	r11, [rsp+72]      ; /* r11  = dcode */
+	mov	rdx, [rsp+80]      ; /* rdx  = hold */
+	mov	ebx, [rsp+88]      ; /* ebx  = bits */
+	mov	r12d, [rsp+100]    ; /* r12d = lmask */
+	mov	r13d, [rsp+104]    ; /* r13d = dmask */
+                                          ; /* r14d = len */
+                                          ; /* r15d = dist */
+
+
+	cld
+	cmp	r10, rdi
+	je	L_one_time           ; /* if only one decode left */
+	cmp	r9, rsi
+
+    jne L_do_loop
+
+
+L_one_time:
+	mov	r8, r12           ; /* r8 = lmask */
+	cmp	bl, 32
+	ja	L_get_length_code_one_time
+
+	lodsd                         ; /* eax = *(uint *)in++ */
+	mov	cl, bl            ; /* cl = bits, needs it for shifting */
+	add	bl, 32             ; /* bits += 32 */
+	shl	rax, cl
+	or	rdx, rax          ; /* hold |= *((uint *)in)++ << bits */
+	jmp	L_get_length_code_one_time
+
+ALIGN 4
+L_while_test:
+	cmp	r10, rdi
+	jbe	L_break_loop
+	cmp	r9, rsi
+	jbe	L_break_loop
+
+L_do_loop:
+	mov	r8, r12           ; /* r8 = lmask */
+	cmp	bl, 32
+	ja	L_get_length_code    ; /* if (32 < bits) */
+
+	lodsd                         ; /* eax = *(uint *)in++ */
+	mov	cl, bl            ; /* cl = bits, needs it for shifting */
+	add	bl, 32             ; /* bits += 32 */
+	shl	rax, cl
+	or	rdx, rax          ; /* hold |= *((uint *)in)++ << bits */
+
+L_get_length_code:
+	and	r8, rdx            ; /* r8 &= hold */
+	mov	eax, [rbp+r8*4]  ; /* eax = lcode[hold & lmask] */
+
+	mov	cl, ah            ; /* cl = this.bits */
+	sub	bl, ah            ; /* bits -= this.bits */
+	shr	rdx, cl           ; /* hold >>= this.bits */
+
+	test	al, al
+	jnz	L_test_for_length_base ; /* if (op != 0) 45.7% */
+
+	mov	r8, r12            ; /* r8 = lmask */
+	shr	eax, 16            ; /* output this.val char */
+	stosb
+
+L_get_length_code_one_time:
+	and	r8, rdx            ; /* r8 &= hold */
+	mov	eax, [rbp+r8*4] ; /* eax = lcode[hold & lmask] */
+
+L_dolen:
+	mov	cl, ah            ; /* cl = this.bits */
+	sub	bl, ah            ; /* bits -= this.bits */
+	shr	rdx, cl           ; /* hold >>= this.bits */
+
+	test	al, al
+	jnz	L_test_for_length_base ; /* if (op != 0) 45.7% */
+
+	shr	eax, 16            ; /* output this.val char */
+	stosb
+	jmp	L_while_test
+
+ALIGN 4
+L_test_for_length_base:
+	mov	r14d, eax         ; /* len = this */
+	shr	r14d, 16           ; /* len = this.val */
+	mov	cl, al
+
+	test	al, 16
+	jz	L_test_for_second_level_length ; /* if ((op & 16) == 0) 8% */
+	and	cl, 15             ; /* op &= 15 */
+	jz	L_decode_distance    ; /* if (!op) */
+
+L_add_bits_to_len:
+	sub	bl, cl
+	xor	eax, eax
+	inc	eax
+	shl	eax, cl
+	dec	eax
+	and	eax, edx          ; /* eax &= hold */
+	shr	rdx, cl
+	add	r14d, eax         ; /* len += hold & mask[op] */
+
+L_decode_distance:
+	mov	r8, r13           ; /* r8 = dmask */
+	cmp	bl, 32
+	ja	L_get_distance_code  ; /* if (32 < bits) */
+
+	lodsd                         ; /* eax = *(uint *)in++ */
+	mov	cl, bl            ; /* cl = bits, needs it for shifting */
+	add	bl, 32             ; /* bits += 32 */
+	shl	rax, cl
+	or	rdx, rax          ; /* hold |= *((uint *)in)++ << bits */
+
+L_get_distance_code:
+	and	r8, rdx           ; /* r8 &= hold */
+	mov	eax, [r11+r8*4] ; /* eax = dcode[hold & dmask] */
+
+L_dodist:
+	mov	r15d, eax         ; /* dist = this */
+	shr	r15d, 16           ; /* dist = this.val */
+	mov	cl, ah
+	sub	bl, ah            ; /* bits -= this.bits */
+	shr	rdx, cl           ; /* hold >>= this.bits */
+	mov	cl, al            ; /* cl = this.op */
+
+	test	al, 16             ; /* if ((op & 16) == 0) */
+	jz	L_test_for_second_level_dist
+	and	cl, 15             ; /* op &= 15 */
+	jz	L_check_dist_one
+
+L_add_bits_to_dist:
+	sub	bl, cl
+	xor	eax, eax
+	inc	eax
+	shl	eax, cl
+	dec	eax                 ; /* (1 << op) - 1 */
+	and	eax, edx          ; /* eax &= hold */
+	shr	rdx, cl
+	add	r15d, eax         ; /* dist += hold & ((1 << op) - 1) */
+
+L_check_window:
+	mov	r8, rsi           ; /* save in so from can use it's reg */
+	mov	rax, rdi
+	sub	rax, [rsp+40]      ; /* nbytes = out - beg */
+
+	cmp	eax, r15d
+	jb	L_clip_window        ; /* if (dist > nbytes) 4.2% */
+
+	mov	ecx, r14d         ; /* ecx = len */
+	mov	rsi, rdi
+	sub	rsi, r15          ; /* from = out - dist */
+
+	sar	ecx, 1
+	jnc	L_copy_two           ; /* if len % 2 == 0 */
+
+	rep     movsw
+	mov	al, [rsi]
+	mov	[rdi], al
+	inc	rdi
+
+	mov	rsi, r8           ; /* move in back to %rsi, toss from */
+	jmp	L_while_test
+
+L_copy_two:
+	rep     movsw
+	mov	rsi, r8           ; /* move in back to %rsi, toss from */
+	jmp	L_while_test
+
+ALIGN 4
+L_check_dist_one:
+	cmp	r15d, 1            ; /* if dist 1, is a memset */
+	jne	L_check_window
+	cmp	[rsp+40], rdi      ; /* if out == beg, outside window */
+	je	L_check_window
+
+	mov	ecx, r14d         ; /* ecx = len */
+	mov	al, [rdi-1]
+	mov	ah, al
+
+	sar	ecx, 1
+	jnc	L_set_two
+	mov	[rdi], al
+	inc	rdi
+
+L_set_two:
+	rep     stosw
+	jmp	L_while_test
+
+ALIGN 4
+L_test_for_second_level_length:
+	test	al, 64
+	jnz	L_test_for_end_of_block ; /* if ((op & 64) != 0) */
+
+	xor	eax, eax
+	inc	eax
+	shl	eax, cl
+	dec	eax
+	and	eax, edx         ; /* eax &= hold */
+	add	eax, r14d        ; /* eax += len */
+	mov	eax, [rbp+rax*4] ; /* eax = lcode[val+(hold&mask[op])]*/
+	jmp	L_dolen
+
+ALIGN 4
+L_test_for_second_level_dist:
+	test	al, 64
+	jnz	L_invalid_distance_code ; /* if ((op & 64) != 0) */
+
+	xor	eax, eax
+	inc	eax
+	shl	eax, cl
+	dec	eax
+	and	eax, edx         ; /* eax &= hold */
+	add	eax, r15d        ; /* eax += dist */
+	mov	eax, [r11+rax*4] ; /* eax = dcode[val+(hold&mask[op])]*/
+	jmp	L_dodist
+
+ALIGN 4
+L_clip_window:
+	mov	ecx, eax         ; /* ecx = nbytes */
+	mov	eax, [rsp+92]     ; /* eax = wsize, prepare for dist cmp */
+	neg	ecx                ; /* nbytes = -nbytes */
+
+	cmp	eax, r15d
+	jb	L_invalid_distance_too_far ; /* if (dist > wsize) */
+
+	add	ecx, r15d         ; /* nbytes = dist - nbytes */
+	cmp	dword ptr [rsp+96], 0
+	jne	L_wrap_around_window ; /* if (write != 0) */
+
+	mov	rsi, [rsp+56]     ; /* from  = window */
+	sub	eax, ecx         ; /* eax  -= nbytes */
+	add	rsi, rax         ; /* from += wsize - nbytes */
+
+	mov	eax, r14d        ; /* eax = len */
+	cmp	r14d, ecx
+	jbe	L_do_copy           ; /* if (nbytes >= len) */
+
+	sub	eax, ecx         ; /* eax -= nbytes */
+	rep     movsb
+	mov	rsi, rdi
+	sub	rsi, r15         ; /* from = &out[ -dist ] */
+	jmp	L_do_copy
+
+ALIGN 4
+L_wrap_around_window:
+	mov	eax, [rsp+96]     ; /* eax = write */
+	cmp	ecx, eax
+	jbe	L_contiguous_in_window ; /* if (write >= nbytes) */
+
+	mov	esi, [rsp+92]     ; /* from  = wsize */
+	add	rsi, [rsp+56]     ; /* from += window */
+	add	rsi, rax         ; /* from += write */
+	sub	rsi, rcx         ; /* from -= nbytes */
+	sub	ecx, eax         ; /* nbytes -= write */
+
+	mov	eax, r14d        ; /* eax = len */
+	cmp	eax, ecx
+	jbe	L_do_copy           ; /* if (nbytes >= len) */
+
+	sub	eax, ecx         ; /* len -= nbytes */
+	rep     movsb
+	mov	rsi, [rsp+56]     ; /* from = window */
+	mov	ecx, [rsp+96]     ; /* nbytes = write */
+	cmp	eax, ecx
+	jbe	L_do_copy           ; /* if (nbytes >= len) */
+
+	sub	eax, ecx         ; /* len -= nbytes */
+	rep     movsb
+	mov	rsi, rdi
+	sub	rsi, r15         ; /* from = out - dist */
+	jmp	L_do_copy
+
+ALIGN 4
+L_contiguous_in_window:
+	mov	rsi, [rsp+56]     ; /* rsi = window */
+	add	rsi, rax
+	sub	rsi, rcx         ; /* from += write - nbytes */
+
+	mov	eax, r14d        ; /* eax = len */
+	cmp	eax, ecx
+	jbe	L_do_copy           ; /* if (nbytes >= len) */
+
+	sub	eax, ecx         ; /* len -= nbytes */
+	rep     movsb
+	mov	rsi, rdi
+	sub	rsi, r15         ; /* from = out - dist */
+	jmp	L_do_copy           ; /* if (nbytes >= len) */
+
+ALIGN 4
+L_do_copy:
+	mov	ecx, eax         ; /* ecx = len */
+	rep     movsb
+
+	mov	rsi, r8          ; /* move in back to %esi, toss from */
+	jmp	L_while_test
+
+L_test_for_end_of_block:
+	test	al, 32
+	jz	L_invalid_literal_length_code
+	mov	dword ptr [rsp+116], 1
+	jmp	L_break_loop_with_status
+
+L_invalid_literal_length_code:
+	mov	dword ptr [rsp+116], 2
+	jmp	L_break_loop_with_status
+
+L_invalid_distance_code:
+	mov	dword ptr [rsp+116], 3
+	jmp	L_break_loop_with_status
+
+L_invalid_distance_too_far:
+	mov	dword ptr [rsp+116], 4
+	jmp	L_break_loop_with_status
+
+L_break_loop:
+	mov	dword ptr [rsp+116], 0
+
+L_break_loop_with_status:
+; /* put in, out, bits, and hold back into ar and pop esp */
+	mov	[rsp+16], rsi     ; /* in */
+	mov	[rsp+32], rdi     ; /* out */
+	mov	[rsp+88], ebx     ; /* bits */
+	mov	[rsp+80], rdx     ; /* hold */
+
+	mov	rax, [rsp]       ; /* restore rbp and rsp */
+	mov	rbp, [rsp+8]
+	mov	rsp, rax
+
+
+
+	mov rsi,[rsp-8]
+	mov rdi,[rsp-16]
+	mov r12,[rsp-24]
+	mov r13,[rsp-32]
+	mov r14,[rsp-40]
+	mov r15,[rsp-48]
+	mov rbx,[rsp-56]
+	
+    ret 0
+;          :
+;          : "m" (ar)
+;          : "memory", "%rax", "%rbx", "%rcx", "%rdx", "%rsi", "%rdi",
+;            "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "%r14", "%r15"
+;    );
+
+inffas8664fnc 	ENDP
+;_TEXT	ENDS
+END

contrib/masmx64/readme.txt

@@ -0,0 +1,28 @@
+Summary
+-------
+This directory contains ASM implementations of the functions
+longest_match() and inflate_fast(), for 64 bits x86 (both AMD64 and Intel EM64t),
+for use with Microsoft Macro Assembler (x64) for AMD64 and Microsoft C++ 64 bits.
+
+gvmat64.asm is written by Gilles Vollant (2005), by using Brian Raiter 686/32 bits
+   assembly optimized version from Jean-loup Gailly original longest_match function
+
+inffasx64.asm and inffas8664.c were written by Chris Anderson, by optimizing
+   original function from Mark Adler
+
+Use instructions
+----------------
+Copy these files into the zlib source directory.
+
+define ASMV and ASMINF in your project. Include inffas8664.c in your source tree,
+and inffasx64.obj and gvmat64.obj as object to link.
+
+
+Build instructions
+------------------
+run bld_64.bat with Microsoft Macro Assembler (x64) for AMD64 (ml64.exe)
+
+ml64.exe is given with Visual Studio 2005, Windows 2003 server DDK
+
+You can get Windows 2003 server DDK with ml64 and cl for AMD64 from 
+  http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price)

contrib/masmx86/bld_ml32.bat

@@ -0,0 +1,2 @@
+ml /coff /Zi /c /Flgvmat32.lst  gvmat32.asm 
+ml /coff /Zi /c /Flinffas32.lst inffas32.asm 

contrib/masmx86/gvmat32.asm

@@ -1,14 +1,52 @@
-;
 ; gvmat32.asm -- Asm portion of the optimized longest_match for 32 bits x86
 ; Copyright (C) 1995-1996 Jean-loup Gailly and Gilles Vollant.
 ; File written by Gilles Vollant, by modifiying the longest_match
 ;  from Jean-loup Gailly in deflate.c
-; It need wmask == 0x7fff
-;     (assembly code is faster with a fixed wmask)
 ;
-; For Visual C++ 4.2 and ML 6.11c (version in directory \MASM611C of Win95 DDK)
+;         http://www.zlib.net
-;   I compile with : "ml /coff /Zi /c gvmat32.asm"
+;         http://www.winimage.com/zLibDll
+;         http://www.muppetlabs.com/~breadbox/software/assembly.html
 ;
+; For Visual C++ 4.x and higher and ML 6.x and higher
+;   ml.exe is in directory \MASM611C of Win95 DDK
+;   ml.exe is also distributed in http://www.masm32.com/masmdl.htm
+;    and in VC++2003 toolkit at http://msdn.microsoft.com/visualc/vctoolkit2003/
+;
+; this file contain two implementation of longest_match
+;
+;  longest_match_7fff : written 1996 by Gilles Vollant optimized for 
+;            first Pentium. Assume s->w_mask == 0x7fff
+;  longest_match_686 : written by Brian raiter (1998), optimized for Pentium Pro
+;
+;  for using an seembly version of longest_match, you need define ASMV in project
+;  There is two way in using gvmat32.asm
+;
+;  A) Suggested method
+;    if you want include both longest_match_7fff and longest_match_686
+;    compile the asm file running
+;           ml /coff /Zi /Flgvmat32.lst /c gvmat32.asm
+;    and include gvmat32c.c in your project
+;    if you have an old cpu (386,486 or first Pentium) and s->w_mask==0x7fff,
+;        longest_match_7fff will be used
+;    if you have a more modern CPU (Pentium Pro, II and higher)
+;        longest_match_686 will be used
+;    on old cpu with s->w_mask!=0x7fff, longest_match_686 will be used,
+;        but this is not a sitation you'll find often
+;
+;  B) Alternative
+;    if you are not interresed in old cpu performance and want the smaller
+;       binaries possible
+;
+;    compile the asm file running
+;           ml /coff /Zi /c /Flgvmat32.lst /DNOOLDPENTIUMCODE gvmat32.asm
+;    and do not include gvmat32c.c in your project (ou define also 
+;              NOOLDPENTIUMCODE)
+;
+; note : as I known, longest_match_686 is very faster than longest_match_7fff
+;        on pentium Pro/II/III, faster (but less) in P4, but it seem
+;        longest_match_7fff can be faster (very very litte) on AMD Athlon64/K8
+;
+; see below : zlib1222add must be adjuster if you use a zlib version < 1.2.2.2
 
 ;uInt longest_match_7fff(s, cur_match)
 ;    deflate_state *s;
@@ -47,33 +85,48 @@
 
 
 
-;  all the +4 offsets are due to the addition of pending_buf_size (in zlib
+;  all the +zlib1222add offsets are due to the addition of fields
-;  in the deflate_state structure since the asm code was first written
+;  in zlib in the deflate_state structure since the asm code was first written
-;  (if you compile with zlib 1.0.4 or older, remove the +4).
+;  (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+;  (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+;  if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
+
+    zlib1222add         equ     8
+
 ;  Note : these value are good with a 8 bytes boundary pack structure
-    dep_chain_length    equ     70h+4
+    dep_chain_length    equ     74h+zlib1222add
-    dep_window          equ     2ch+4
+    dep_window          equ     30h+zlib1222add
-    dep_strstart        equ     60h+4
+    dep_strstart        equ     64h+zlib1222add
-    dep_prev_length     equ     6ch+4
+    dep_prev_length     equ     70h+zlib1222add
-    dep_nice_match      equ     84h+4
+    dep_nice_match      equ     88h+zlib1222add
-    dep_w_size          equ     20h+4
+    dep_w_size          equ     24h+zlib1222add
-    dep_prev            equ     34h+4
+    dep_prev            equ     38h+zlib1222add
-    dep_w_mask          equ     28h+4
+    dep_w_mask          equ     2ch+zlib1222add
-    dep_good_match      equ     80h+4
+    dep_good_match      equ     84h+zlib1222add
-    dep_match_start     equ     64h+4
+    dep_match_start     equ     68h+zlib1222add
-    dep_lookahead       equ     68h+4
+    dep_lookahead       equ     6ch+zlib1222add
 
 
 _TEXT                   segment
 
 IFDEF NOUNDERLINE
+   IFDEF NOOLDPENTIUMCODE
+            public  longest_match
+            public  match_init
+   ELSE            
             public  longest_match_7fff
+            public  cpudetect32
             public  longest_match_686
-;                        public  match_init
+   ENDIF
 ELSE
+   IFDEF NOOLDPENTIUMCODE
+            public  _longest_match
+            public  _match_init
+   ELSE
             public  _longest_match_7fff
+            public  _cpudetect32
             public  _longest_match_686
-;                        public  _match_init
+   ENDIF
 ENDIF
 
     MAX_MATCH           equ     258
@@ -82,17 +135,7 @@ ENDIF
 
 
 
-IFDEF NOUNDERLINE
+IFNDEF NOOLDPENTIUMCODE
-;match_init      proc near
-;                ret
-;match_init      endp
-ELSE
-;_match_init     proc near
-;                ret
-;_match_init     endp
-ENDIF
-
-
 IFDEF NOUNDERLINE
 longest_match_7fff   proc near
 ELSE
@@ -558,9 +601,7 @@ cpudetect32     endp
 ELSE
 _cpudetect32    endp
 ENDIF
-
+ENDIF
-
-
 
 MAX_MATCH       equ     258
 MIN_MATCH       equ     3
@@ -597,19 +638,19 @@ curmatch	equ  esp + 60
 ;;; program to crash horribly, without so much as a warning at
 ;;; compile time. Sigh.)
 
-dsWSize		equ 36
+dsWSize     equ 36+zlib1222add
-dsWMask		equ 44
+dsWMask     equ 44+zlib1222add
-dsWindow	equ 48
+dsWindow    equ 48+zlib1222add
-dsPrev		equ 56
+dsPrev      equ 56+zlib1222add
-dsMatchLen	equ 88
+dsMatchLen  equ 88+zlib1222add
-dsPrevMatch	equ 92
+dsPrevMatch equ 92+zlib1222add
-dsStrStart	equ 100
+dsStrStart  equ 100+zlib1222add
-dsMatchStart	equ 104
+dsMatchStart    equ 104+zlib1222add
-dsLookahead	equ 108
+dsLookahead equ 108+zlib1222add
-dsPrevLen	equ 112
+dsPrevLen   equ 112+zlib1222add
-dsMaxChainLen	equ 116
+dsMaxChainLen   equ 116+zlib1222add
-dsGoodMatch	equ 132
+dsGoodMatch equ 132+zlib1222add
-dsNiceMatch	equ 136
+dsNiceMatch equ 136+zlib1222add
 
 
 ;;; match.asm -- Pentium-Pro-optimized version of longest_match()
@@ -628,13 +669,20 @@ dsNiceMatch	equ 136
 ;;; uInt longest_match(deflate_state *deflatestate, IPos curmatch)
 
 ;_longest_match:
-IFDEF NOUNDERLINE
+IFDEF NOOLDPENTIUMCODE
-longest_match_686   proc near
+    IFDEF NOUNDERLINE
+    longest_match       proc near
+    ELSE
+    _longest_match      proc near
+    ENDIF
 ELSE
-_longest_match_686  proc near
+    IFDEF NOUNDERLINE
+    longest_match_686   proc near
+    ELSE
+    _longest_match_686  proc near
+    ENDIF
 ENDIF
 
-
 ;;; Save registers that the compiler may be using, and adjust esp to
 ;;; make room for our stack frame.
 
@@ -895,10 +943,29 @@ LookaheadRet:
 ; Your can freely use gvmat32 in any free or commercial app if you don't remove the string in the binary!
     db     0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998",0dh,0ah
 
-IFDEF NOUNDERLINE
+
-longest_match_686   endp
+IFDEF NOOLDPENTIUMCODE
+    IFDEF NOUNDERLINE
+    longest_match       endp
+    ELSE
+    _longest_match      endp
+    ENDIF
+
+    IFDEF NOUNDERLINE
+    match_init      proc near
+                    ret
+    match_init      endp
+    ELSE
+    _match_init     proc near
+                    ret
+    _match_init     endp
+    ENDIF    
 ELSE
-_longest_match_686  endp
+    IFDEF NOUNDERLINE
+    longest_match_686   endp
+    ELSE
+    _longest_match_686  endp
+    ENDIF
 ENDIF
 
 _TEXT   ends

contrib/masmx86/gvmat32c.c

@@ -6,16 +6,12 @@
  *  longest_match execute standard C code is wmask != 0x7fff
  *     (assembly code is faster with a fixed wmask)
  *
+ * Read comment at beginning of gvmat32.asm for more information
  */
 
+#if defined(ASMV) && (!defined(NOOLDPENTIUMCODE))
 #include "deflate.h"
 
-#ifdef ASMV
-#define NIL 0
-
-#define UNALIGNED_OK
-
-
 /* if your C compiler don't add underline before function name,
         define ADD_UNDERLINE_ASMFUNC */
 #ifdef ADD_UNDERLINE_ASMFUNC
@@ -25,11 +21,6 @@
 #endif
 
 
-
-void match_init()
-{
-}
-
 unsigned long cpudetect32();
 
 uInt longest_match_c(
@@ -45,162 +36,27 @@ uInt longest_match_686(
     deflate_state *s,
     IPos cur_match);                             /* current match */
 
+
+static uInt iIsPPro=2;
+
+void match_init ()
+{
+    iIsPPro = (((cpudetect32()/0x100)&0xf)>=6) ? 1 : 0;
+}
+
 uInt longest_match(
     deflate_state *s,
     IPos cur_match)                             /* current match */
 {
-    static uInt iIsPPro=2;
+    if (iIsPPro!=0)
-
-    if ((s->w_mask == 0x7fff) && (iIsPPro==0))
-        return longest_match_7fff(s,cur_match);
-
-    if (iIsPPro==1)
         return longest_match_686(s,cur_match);
 
-    if (iIsPPro==2)
+    if (s->w_mask != 0x7fff)
-        iIsPPro = (((cpudetect32()/0x100)&0xf)>=6) ? 1 : 0;
+        return longest_match_686(s,cur_match);
 
-    return longest_match_c(s,cur_match);
+    /* now ((s->w_mask == 0x7fff) && (iIsPPro==0)) */
+        return longest_match_7fff(s,cur_match);
 }
 
 
-
+#endif /* defined(ASMV) && (!defined(NOOLDPENTIUMCODE)) */
-uInt longest_match_c(s, cur_match)
-    deflate_state *s;
-    IPos cur_match;                             /* current match */
-{
-    unsigned chain_length = s->max_chain_length;/* max hash chain length */
-    register Bytef *scan = s->window + s->strstart; /* current string */
-    register Bytef *match;                       /* matched string */
-    register int len;                           /* length of current match */
-    int best_len = s->prev_length;              /* best match length so far */
-    int nice_match = s->nice_match;             /* stop if match long enough */
-    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
-        s->strstart - (IPos)MAX_DIST(s) : NIL;
-    /* Stop when cur_match becomes <= limit. To simplify the code,
-     * we prevent matches with the string of window index 0.
-     */
-    Posf *prev = s->prev;
-    uInt wmask = s->w_mask;
-
-#ifdef UNALIGNED_OK
-    /* Compare two bytes at a time. Note: this is not always beneficial.
-     * Try with and without -DUNALIGNED_OK to check.
-     */
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
-    register ush scan_start = *(ushf*)scan;
-    register ush scan_end   = *(ushf*)(scan+best_len-1);
-#else
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
-    register Byte scan_end1  = scan[best_len-1];
-    register Byte scan_end   = scan[best_len];
-#endif
-
-    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
-     * It is easy to get rid of this optimization if necessary.
-     */
-    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
-    /* Do not waste too much time if we already have a good match: */
-    if (s->prev_length >= s->good_match) {
-        chain_length >>= 2;
-    }
-    /* Do not look for matches beyond the end of the input. This is necessary
-     * to make deflate deterministic.
-     */
-    if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
-
-    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
-    do {
-        Assert(cur_match < s->strstart, "no future");
-        match = s->window + cur_match;
-
-        /* Skip to next match if the match length cannot increase
-         * or if the match length is less than 2:
-         */
-#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
-        /* This code assumes sizeof(unsigned short) == 2. Do not use
-         * UNALIGNED_OK if your compiler uses a different size.
-         */
-        if (*(ushf*)(match+best_len-1) != scan_end ||
-            *(ushf*)match != scan_start) continue;
-
-        /* It is not necessary to compare scan[2] and match[2] since they are
-         * always equal when the other bytes match, given that the hash keys
-         * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
-         * strstart+3, +5, ... up to strstart+257. We check for insufficient
-         * lookahead only every 4th comparison; the 128th check will be made
-         * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
-         * necessary to put more guard bytes at the end of the window, or
-         * to check more often for insufficient lookahead.
-         */
-        Assert(scan[2] == match[2], "scan[2]?");
-        scan++, match++;
-        do {
-        } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 scan < strend);
-        /* The funny "do {}" generates better code on most compilers */
-
-        /* Here, scan <= window+strstart+257 */
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-        if (*scan == *match) scan++;
-
-        len = (MAX_MATCH - 1) - (int)(strend-scan);
-        scan = strend - (MAX_MATCH-1);
-
-#else /* UNALIGNED_OK */
-
-        if (match[best_len]   != scan_end  ||
-            match[best_len-1] != scan_end1 ||
-            *match            != *scan     ||
-            *++match          != scan[1])      continue;
-
-        /* The check at best_len-1 can be removed because it will be made
-         * again later. (This heuristic is not always a win.)
-         * It is not necessary to compare scan[2] and match[2] since they
-         * are always equal when the other bytes match, given that
-         * the hash keys are equal and that HASH_BITS >= 8.
-         */
-        scan += 2, match++;
-        Assert(*scan == *match, "match[2]?");
-
-        /* We check for insufficient lookahead only every 8th comparison;
-         * the 256th check will be made at strstart+258.
-         */
-        do {
-        } while (*++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 scan < strend);
-
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
-        len = MAX_MATCH - (int)(strend - scan);
-        scan = strend - MAX_MATCH;
-
-#endif /* UNALIGNED_OK */
-
-        if (len > best_len) {
-            s->match_start = cur_match;
-            best_len = len;
-            if (len >= nice_match) break;
-#ifdef UNALIGNED_OK
-            scan_end = *(ushf*)(scan+best_len-1);
-#else
-            scan_end1  = scan[best_len-1];
-            scan_end   = scan[best_len];
-#endif
-        }
-    } while ((cur_match = prev[cur_match & wmask]) > limit
-             && --chain_length != 0);
-
-    if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
-    return s->lookahead;
-}
-
-#endif /* ASMV */

contrib/masmx86/inffas32.asm

@@ -1,3 +1,57 @@
+;/* inffas32.asm is a hand tuned assembler version of inffast.c -- fast decoding
+; *
+; * inffas32.asm is derivated from inffas86.c, with translation of assembly code
+; *
+; * Copyright (C) 1995-2003 Mark Adler
+; * For conditions of distribution and use, see copyright notice in zlib.h
+; *
+; * Copyright (C) 2003 Chris Anderson <christop@charm.net>
+; * Please use the copyright conditions above.
+; *
+; * Mar-13-2003 -- Most of this is derived from inffast.S which is derived from
+; * the gcc -S output of zlib-1.2.0/inffast.c.  Zlib-1.2.0 is in beta release at
+; * the moment.  I have successfully compiled and tested this code with gcc2.96,
+; * gcc3.2, icc5.0, msvc6.0.  It is very close to the speed of inffast.S
+; * compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX
+; * enabled.  I will attempt to merge the MMX code into this version.  Newer
+; * versions of this and inffast.S can be found at
+; * http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/
+; * 
+; * 2005 : modification by Gilles Vollant
+; */
+; For Visual C++ 4.x and higher and ML 6.x and higher
+;   ml.exe is in directory \MASM611C of Win95 DDK
+;   ml.exe is also distributed in http://www.masm32.com/masmdl.htm
+;    and in VC++2003 toolkit at http://msdn.microsoft.com/visualc/vctoolkit2003/
+;
+;
+;   compile with command line option
+;   ml  /coff /Zi /c /Flinffas32.lst inffas32.asm
+
+;   if you define NO_GZIP (see inflate.h), compile with
+;   ml  /coff /Zi /c /Flinffas32.lst /DNO_GUNZIP inffas32.asm
+
+
+; zlib122sup is 0 fort zlib 1.2.2.1 and lower
+; zlib122sup is 8 fort zlib 1.2.2.2 and more (with addition of dmax and head 
+;        in inflate_state in inflate.h)
+zlib1222sup      equ    8
+
+
+IFDEF GUNZIP
+  INFLATE_MODE_TYPE    equ 11
+  INFLATE_MODE_BAD     equ 26
+ELSE
+  IFNDEF NO_GUNZIP
+    INFLATE_MODE_TYPE    equ 11
+    INFLATE_MODE_BAD     equ 26
+  ELSE
+    INFLATE_MODE_TYPE    equ 3
+    INFLATE_MODE_BAD     equ 17
+  ENDIF
+ENDIF
+
+
 ; 75 "inffast.S"
 ;FILE "inffast.S"
 
@@ -84,17 +138,16 @@ dd	2147483647
 dd	4294967295
 
 
-
 mode_state	 equ	0	;/* state->mode	*/
-wsize_state	 equ	32	;/* state->wsize */
+wsize_state	 equ	(32+zlib1222sup)	;/* state->wsize */
-write_state	 equ	(36+4)	;/* state->write */
+write_state	 equ	(36+4+zlib1222sup)	;/* state->write */
-window_state	 equ	(40+4)	;/* state->window */
+window_state	 equ	(40+4+zlib1222sup)	;/* state->window */
-hold_state	 equ	(44+4)	;/* state->hold	*/
+hold_state	 equ	(44+4+zlib1222sup)	;/* state->hold	*/
-bits_state	 equ	(48+4)	;/* state->bits	*/
+bits_state	 equ	(48+4+zlib1222sup)	;/* state->bits	*/
-lencode_state	 equ	(64+4)	;/* state->lencode */
+lencode_state	 equ	(64+4+zlib1222sup)	;/* state->lencode */
-distcode_state	 equ	(68+4)	;/* state->distcode */
+distcode_state	 equ	(68+4+zlib1222sup)	;/* state->distcode */
-lenbits_state	 equ	(72+4)	;/* state->lenbits */
+lenbits_state	 equ	(72+4+zlib1222sup)	;/* state->lenbits */
-distbits_state	 equ	(76+4)	;/* state->distbits */
+distbits_state	 equ	(76+4+zlib1222sup)	;/* state->distbits */
 
 
 ;;SECTION .text
@@ -591,9 +644,9 @@ L_init_mmx:
 	movd mm0,ebp
 	mov  ebp,ebx
 ; 896 "inffast.S"
-	movd mm4,[esp+0]
+	movd mm4,dword ptr [esp+0]
 	movq mm3,mm4
-	movd mm5,[esp+4]
+	movd mm5,dword ptr [esp+4]
 	movq mm2,mm5
 	pxor mm1,mm1
 	mov  ebx, [esp+8]
@@ -607,7 +660,7 @@ L_do_loop_mmx:
 	ja  L_get_length_code_mmx
 
 	movd mm6,ebp
-	movd mm7,[esi]
+	movd mm7,dword ptr [esi]
 	add  esi,4
 	psllq mm7,mm6
 	add  ebp,32
@@ -664,7 +717,7 @@ L_decode_distance_mmx:
 	ja L_get_dist_code_mmx
 
 	movd mm6,ebp
-	movd mm7,[esi]
+	movd mm7,dword ptr [esi]
 	add  esi,4
 	psllq mm7,mm6
 	add  ebp,32
@@ -868,7 +921,7 @@ L_invalid_distance_code:
 
 
 	mov  ecx, invalid_distance_code_msg
-	mov  edx,26
+	mov  edx,INFLATE_MODE_BAD
 	jmp  L_update_stream_state
 
 L_test_for_end_of_block:
@@ -881,7 +934,7 @@ L_test_for_end_of_block:
 	jz  L_invalid_literal_length_code
 
 	mov  ecx,0
-	mov  edx,11
+	mov  edx,INFLATE_MODE_TYPE
 	jmp  L_update_stream_state
 
 L_invalid_literal_length_code:
@@ -891,7 +944,7 @@ L_invalid_literal_length_code:
 
 
 	mov  ecx, invalid_literal_length_code_msg
-	mov  edx,26
+	mov  edx,INFLATE_MODE_BAD
 	jmp  L_update_stream_state
 
 L_invalid_distance_too_far:
@@ -900,7 +953,7 @@ L_invalid_distance_too_far:
 
 	mov  esi, [esp+44]
 	mov  ecx, invalid_distance_too_far_msg
-	mov  edx,26
+	mov  edx,INFLATE_MODE_BAD
 	jmp  L_update_stream_state
 
 L_update_stream_state:
@@ -1026,8 +1079,5 @@ L_done:
 	pop  edi
 	ret
 
-
-
-
 _TEXT	ends
 end

contrib/masmx86/mkasm.bat

@@ -1,3 +1,3 @@
-cl /I..\.. /O2 /c gvmat32c.c
+cl /DASMV /I..\.. /O2 /c gvmat32c.c
 ml /coff /Zi /c /Flgvmat32.lst gvmat32.asm
 ml /coff /Zi /c /Flinffas32.lst inffas32.asm

contrib/minizip/ChangeLogUnzip

@@ -1,3 +1,15 @@
+Change in 1.01e (12 feb 05)
+- Fix in zipOpen2 for globalcomment (Rolf Kalbermatter)
+- Fix possible memory leak in unzip.c (Zoran Stevanovic)
+
+Change in 1.01b (20 may 04)
+- Integrate patch from Debian package (submited by Mark Brown)
+- Add tools mztools from Xavier Roche
+
+Change in 1.01 (8 may 04)
+- fix buffer overrun risk in unzip.c (Xavier Roche)
+- fix a minor buffer insecurity in minizip.c (Mike Whittaker)
+
 Change in 1.00: (10 sept 03)
 - rename to 1.00
 - cosmetic code change

contrib/minizip/crypt.h

@@ -1,9 +1,9 @@
 /* crypt.h -- base code for crypt/uncrypt ZIPfile
 
 
-   Version 1.00, September 10th, 2003
+   Version 1.01e, February 12th, 2005
 
-   Copyright (C) 1998-2003 Gilles Vollant
+   Copyright (C) 1998-2005 Gilles Vollant
 
    This code is a modified version of crypting code in Infozip distribution
 

contrib/minizip/ioapi.c

@@ -1,9 +1,9 @@
 /* ioapi.c -- IO base function header for compress/uncompress .zip
    files using zlib + zip or unzip API
 
-   Version 1.00, September 10th, 2003
+   Version 1.01e, February 12th, 2005
 
-   Copyright (C) 1998-2003 Gilles Vollant
+   Copyright (C) 1998-2005 Gilles Vollant
 */
 
 #include <stdio.h>
@@ -94,7 +94,7 @@ uLong ZCALLBACK fread_file_func (opaque, stream, buf, size)
    uLong size;
 {
     uLong ret;
-    ret = fread(buf, 1, (size_t)size, (FILE *)stream);
+    ret = (uLong)fread(buf, 1, (size_t)size, (FILE *)stream);
     return ret;
 }
 
@@ -106,7 +106,7 @@ uLong ZCALLBACK fwrite_file_func (opaque, stream, buf, size)
    uLong size;
 {
     uLong ret;
-    ret = fwrite(buf, 1, (size_t)size, (FILE *)stream);
+    ret = (uLong)fwrite(buf, 1, (size_t)size, (FILE *)stream);
     return ret;
 }
 

contrib/minizip/ioapi.h

@@ -1,9 +1,9 @@
 /* ioapi.h -- IO base function header for compress/uncompress .zip
    files using zlib + zip or unzip API
 
-   Version 1.00, September 10th, 2003
+   Version 1.01e, February 12th, 2005
 
-   Copyright (C) 1998-2003 Gilles Vollant
+   Copyright (C) 1998-2005 Gilles Vollant
 */
 
 #ifndef _ZLIBIOAPI_H

contrib/minizip/iowin32.c

@@ -2,9 +2,9 @@
    files using zlib + zip or unzip API
    This IO API version uses the Win32 API (for Microsoft Windows)
 
-   Version 1.00, September 10th, 2003
+   Version 1.01e, February 12th, 2005
 
-   Copyright (C) 1998-2003 Gilles Vollant
+   Copyright (C) 1998-2005 Gilles Vollant
 */
 
 #include <stdlib.h>

contrib/minizip/iowin32.h

@@ -2,9 +2,9 @@
    files using zlib + zip or unzip API
    This IO API version uses the Win32 API (for Microsoft Windows)
 
-   Version 1.00, September 10th, 2003
+   Version 1.01e, February 12th, 2005
 
-   Copyright (C) 1998-2003 Gilles Vollant
+   Copyright (C) 1998-2005 Gilles Vollant
 */
 
 #include <windows.h>

contrib/minizip/miniunz.c

@@ -1,3 +1,11 @@
+/*
+   miniunz.c
+   Version 1.01e, February 12th, 2005
+
+   Copyright (C) 1998-2005 Gilles Vollant
+*/
+
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -27,7 +35,7 @@
   mini unzip, demo of unzip package
 
   usage :
-  Usage : miniunz [-exvlo] file.zip [file_to_extract]
+  Usage : miniunz [-exvlo] file.zip [file_to_extract] [-d extractdir]
 
   list the file in the zipfile, and print the content of FILE_ID.ZIP or README.TXT
     if it exists
@@ -140,17 +148,18 @@ int makedir (newdir)
 
 void do_banner()
 {
-    printf("MiniUnz 1.00, demo of zLib + Unz package written by Gilles Vollant\n");
+    printf("MiniUnz 1.01b, demo of zLib + Unz package written by Gilles Vollant\n");
     printf("more info at http://www.winimage.com/zLibDll/unzip.html\n\n");
 }
 
 void do_help()
 {
-    printf("Usage : miniunz [-e] [-x] [-v] [-l] [-o] [-p password] file.zip [file_to_extr.]\n\n" \
+    printf("Usage : miniunz [-e] [-x] [-v] [-l] [-o] [-p password] file.zip [file_to_extr.] [-d extractdir]\n\n" \
            "  -e  Extract without pathname (junk paths)\n" \
            "  -x  Extract with pathname\n" \
            "  -v  list files\n" \
            "  -l  list files\n" \
+           "  -d  directory to extract into\n" \
            "  -o  overwrite files without prompting\n" \
            "  -p  extract crypted file using password\n\n");
 }
@@ -304,8 +313,14 @@ int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
                 do
                 {
                     char answer[128];
-                    printf("The file %s exist. Overwrite ? [y]es, [n]o, [A]ll: ",write_filename);
+                    int ret;
-                    scanf("%1s",answer);
+
+                    printf("The file %s exists. Overwrite ? [y]es, [n]o, [A]ll: ",write_filename);
+                    ret = scanf("%1s",answer);
+                    if (ret != 1) 
+                    {
+                       exit(EXIT_FAILURE);
+                    }
                     rep = answer[0] ;
                     if ((rep>='a') && (rep<='z'))
                         rep -= 0x20;
@@ -459,6 +474,8 @@ int main(argc,argv)
     int opt_do_extract=1;
     int opt_do_extract_withoutpath=0;
     int opt_overwrite=0;
+    int opt_extractdir=0;
+    const char *dirname=NULL;
     unzFile uf=NULL;
 
     do_banner();
@@ -488,6 +505,12 @@ int main(argc,argv)
                         opt_do_extract = opt_do_extract_withoutpath = 1;
                     if ((c=='o') || (c=='O'))
                         opt_overwrite=1;
+                    if ((c=='d') || (c=='D'))
+                    {
+                        opt_extractdir=1;
+                        dirname=argv[i+1];
+                    }
+
                     if (((c=='p') || (c=='P')) && (i+1<argc))
                     {
                         password=argv[i+1];
@@ -499,7 +522,7 @@ int main(argc,argv)
             {
                 if (zipfilename == NULL)
                     zipfilename = argv[i];
-                else if (filename_to_extract==NULL)
+                else if ((filename_to_extract==NULL) && (!opt_extractdir))
                         filename_to_extract = argv[i] ;
             }
         }
@@ -544,6 +567,12 @@ int main(argc,argv)
         return do_list(uf);
     else if (opt_do_extract==1)
     {
+        if (opt_extractdir && chdir(dirname)) 
+        {
+          printf("Error changing into %s, aborting\n", dirname);
+          exit(-1);
+        }
+
         if (filename_to_extract == NULL)
             return do_extract(uf,opt_do_extract_withoutpath,opt_overwrite,password);
         else

contrib/minizip/minizip.c

@@ -1,3 +1,10 @@
+/*
+   minizip.c
+   Version 1.01e, February 12th, 2005
+
+   Copyright (C) 1998-2005 Gilles Vollant
+*/
+
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
@@ -66,6 +73,8 @@ uLong filetime(f, tmzip, dt)
   {
     char name[MAXFILENAME+1];
     int len = strlen(f);
+    if (len > MAXFILENAME)
+      len = MAXFILENAME;
 
     strncpy(name, f,MAXFILENAME-1);
     /* strncpy doesnt append the trailing NULL, of the string is too long. */
@@ -120,7 +129,7 @@ int check_exist_file(filename)
 
 void do_banner()
 {
-    printf("MiniZip 1.00, demo of zLib + Zip package written by Gilles Vollant\n");
+    printf("MiniZip 1.01b, demo of zLib + Zip package written by Gilles Vollant\n");
     printf("more info at http://www.winimage.com/zLibDll/unzip.html\n\n");
 }
 
@@ -269,8 +278,13 @@ int main(argc,argv)
                 do
                 {
                     char answer[128];
-                    printf("The file %s exist. Overwrite ? [y]es, [n]o, [a]ppend : ",filename_try);
+                    int ret;
-                    scanf("%1s",answer);
+                    printf("The file %s exists. Overwrite ? [y]es, [n]o, [a]ppend : ",filename_try);
+                    ret = scanf("%1s",answer);
+                    if (ret != 1)
+                    {
+                       exit(EXIT_FAILURE);
+                    }
                     rep = answer[0] ;
                     if ((rep>='a') && (rep<='z'))
                         rep -= 0x20;
@@ -305,7 +319,12 @@ int main(argc,argv)
 
         for (i=zipfilenamearg+1;(i<argc) && (err==ZIP_OK);i++)
         {
-            if (((*(argv[i]))!='-') && ((*(argv[i]))!='/'))
+            if (!((((*(argv[i]))=='-') || ((*(argv[i]))=='/')) &&
+                  ((argv[i][1]=='o') || (argv[i][1]=='O') ||
+                   (argv[i][1]=='a') || (argv[i][1]=='A') ||
+                   (argv[i][1]=='p') || (argv[i][1]=='P') ||
+                   ((argv[i][1]>='0') || (argv[i][1]<='9'))) &&
+                  (strlen(argv[i]) == 2)))
             {
                 FILE * fin;
                 int size_read;
@@ -391,6 +410,10 @@ int main(argc,argv)
         if (errclose != ZIP_OK)
             printf("error in closing %s\n",filename_try);
     }
+    else
+    {
+       do_help();
+    }
 
     free(buf);
     return 0;

contrib/minizip/mztools.c

@@ -0,0 +1,281 @@
+/*
+  Additional tools for Minizip
+  Code: Xavier Roche '2004
+  License: Same as ZLIB (www.gzip.org)
+*/
+
+/* Code */
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "zlib.h"
+#include "unzip.h"
+
+#define READ_8(adr)  ((unsigned char)*(adr))
+#define READ_16(adr) ( READ_8(adr) | (READ_8(adr+1) << 8) )
+#define READ_32(adr) ( READ_16(adr) | (READ_16((adr)+2) << 16) )
+
+#define WRITE_8(buff, n) do { \
+  *((unsigned char*)(buff)) = (unsigned char) ((n) & 0xff); \
+} while(0)
+#define WRITE_16(buff, n) do { \
+  WRITE_8((unsigned char*)(buff), n); \
+  WRITE_8(((unsigned char*)(buff)) + 1, (n) >> 8); \
+} while(0)
+#define WRITE_32(buff, n) do { \
+  WRITE_16((unsigned char*)(buff), (n) & 0xffff); \
+  WRITE_16((unsigned char*)(buff) + 2, (n) >> 16); \
+} while(0)
+
+extern int ZEXPORT unzRepair(file, fileOut, fileOutTmp, nRecovered, bytesRecovered)
+const char* file;
+const char* fileOut;
+const char* fileOutTmp;
+uLong* nRecovered;
+uLong* bytesRecovered;
+{
+  int err = Z_OK;
+  FILE* fpZip = fopen(file, "rb");
+  FILE* fpOut = fopen(fileOut, "wb");
+  FILE* fpOutCD = fopen(fileOutTmp, "wb");
+  if (fpZip != NULL &&  fpOut != NULL) {
+    int entries = 0;
+    uLong totalBytes = 0;
+    char header[30];
+    char filename[256];
+    char extra[1024];
+    int offset = 0;
+    int offsetCD = 0;
+    while ( fread(header, 1, 30, fpZip) == 30 ) {
+      int currentOffset = offset;
+
+      /* File entry */
+      if (READ_32(header) == 0x04034b50) {
+        unsigned int version = READ_16(header + 4);
+        unsigned int gpflag = READ_16(header + 6);
+        unsigned int method = READ_16(header + 8);
+        unsigned int filetime = READ_16(header + 10);
+        unsigned int filedate = READ_16(header + 12);
+        unsigned int crc = READ_32(header + 14); /* crc */
+        unsigned int cpsize = READ_32(header + 18); /* compressed size */
+        unsigned int uncpsize = READ_32(header + 22); /* uncompressed sz */
+        unsigned int fnsize = READ_16(header + 26); /* file name length */
+        unsigned int extsize = READ_16(header + 28); /* extra field length */
+        filename[0] = extra[0] = '\0';
+        
+        /* Header */
+        if (fwrite(header, 1, 30, fpOut) == 30) {
+          offset += 30;
+        } else {
+          err = Z_ERRNO;
+          break;
+        }
+        
+        /* Filename */
+        if (fnsize > 0) {
+          if (fread(filename, 1, fnsize, fpZip) == fnsize) {
+            if (fwrite(filename, 1, fnsize, fpOut) == fnsize) {
+              offset += fnsize;
+            } else {
+              err = Z_ERRNO;
+              break;
+            }
+          } else {
+            err = Z_ERRNO;
+            break;
+          }
+        } else {
+          err = Z_STREAM_ERROR;
+          break;
+        }
+
+        /* Extra field */
+        if (extsize > 0) {
+          if (fread(extra, 1, extsize, fpZip) == extsize) {
+            if (fwrite(extra, 1, extsize, fpOut) == extsize) {
+              offset += extsize;
+            } else {
+              err = Z_ERRNO;
+              break;
+            }
+          } else {
+            err = Z_ERRNO;
+            break;
+          }
+        }
+        
+        /* Data */
+        {
+          int dataSize = cpsize;
+          if (dataSize == 0) {
+            dataSize = uncpsize;
+          }
+          if (dataSize > 0) {
+            char* data = malloc(dataSize);
+            if (data != NULL) {
+              if ((int)fread(data, 1, dataSize, fpZip) == dataSize) {
+                if ((int)fwrite(data, 1, dataSize, fpOut) == dataSize) {
+                  offset += dataSize;
+                  totalBytes += dataSize;
+                } else {
+                  err = Z_ERRNO;
+                }
+              } else {
+                err = Z_ERRNO;
+              }
+              free(data);
+              if (err != Z_OK) {
+                break;
+              }
+            } else {
+              err = Z_MEM_ERROR;
+              break;
+            }
+          }
+        }
+        
+        /* Central directory entry */
+        {
+          char header[46];
+          char* comment = "";
+          int comsize = (int) strlen(comment);
+          WRITE_32(header, 0x02014b50);
+          WRITE_16(header + 4, version);
+          WRITE_16(header + 6, version);
+          WRITE_16(header + 8, gpflag);
+          WRITE_16(header + 10, method);
+          WRITE_16(header + 12, filetime);
+          WRITE_16(header + 14, filedate);
+          WRITE_32(header + 16, crc);
+          WRITE_32(header + 20, cpsize);
+          WRITE_32(header + 24, uncpsize);
+          WRITE_16(header + 28, fnsize);
+          WRITE_16(header + 30, extsize);
+          WRITE_16(header + 32, comsize);
+          WRITE_16(header + 34, 0);     /* disk # */
+          WRITE_16(header + 36, 0);     /* int attrb */
+          WRITE_32(header + 38, 0);     /* ext attrb */
+          WRITE_32(header + 42, currentOffset);
+          /* Header */
+          if (fwrite(header, 1, 46, fpOutCD) == 46) {
+            offsetCD += 46;
+            
+            /* Filename */
+            if (fnsize > 0) {
+              if (fwrite(filename, 1, fnsize, fpOutCD) == fnsize) {
+                offsetCD += fnsize;
+              } else {
+                err = Z_ERRNO;
+                break;
+              }
+            } else {
+              err = Z_STREAM_ERROR;
+              break;
+            }
+            
+            /* Extra field */
+            if (extsize > 0) {
+              if (fwrite(extra, 1, extsize, fpOutCD) == extsize) {
+                offsetCD += extsize;
+              } else {
+                err = Z_ERRNO;
+                break;
+              }
+            }
+            
+            /* Comment field */
+            if (comsize > 0) {
+              if ((int)fwrite(comment, 1, comsize, fpOutCD) == comsize) {
+                offsetCD += comsize;
+              } else {
+                err = Z_ERRNO;
+                break;
+              }
+            }
+            
+            
+          } else {
+            err = Z_ERRNO;
+            break;
+          }
+        }
+
+        /* Success */
+        entries++;
+
+      } else {
+        break;
+      }
+    }
+
+    /* Final central directory  */
+    {
+      int entriesZip = entries;
+      char header[22];
+      char* comment = ""; // "ZIP File recovered by zlib/minizip/mztools";
+      int comsize = (int) strlen(comment);
+      if (entriesZip > 0xffff) {
+        entriesZip = 0xffff;
+      }
+      WRITE_32(header, 0x06054b50);
+      WRITE_16(header + 4, 0);    /* disk # */
+      WRITE_16(header + 6, 0);    /* disk # */
+      WRITE_16(header + 8, entriesZip);   /* hack */
+      WRITE_16(header + 10, entriesZip);  /* hack */
+      WRITE_32(header + 12, offsetCD);    /* size of CD */
+      WRITE_32(header + 16, offset);      /* offset to CD */
+      WRITE_16(header + 20, comsize);     /* comment */
+      
+      /* Header */
+      if (fwrite(header, 1, 22, fpOutCD) == 22) {
+        
+        /* Comment field */
+        if (comsize > 0) {
+          if ((int)fwrite(comment, 1, comsize, fpOutCD) != comsize) {
+            err = Z_ERRNO;
+          }
+        }
+        
+      } else {
+        err = Z_ERRNO;
+      }
+    }
+
+    /* Final merge (file + central directory) */
+    fclose(fpOutCD);
+    if (err == Z_OK) {
+      fpOutCD = fopen(fileOutTmp, "rb");
+      if (fpOutCD != NULL) {
+        int nRead;
+        char buffer[8192];
+        while ( (nRead = (int)fread(buffer, 1, sizeof(buffer), fpOutCD)) > 0) {
+          if ((int)fwrite(buffer, 1, nRead, fpOut) != nRead) {
+            err = Z_ERRNO;
+            break;
+          }
+        }
+        fclose(fpOutCD);
+      }
+    }
+    
+    /* Close */
+    fclose(fpZip);
+    fclose(fpOut);
+    
+    /* Wipe temporary file */
+    (void)remove(fileOutTmp);
+    
+    /* Number of recovered entries */
+    if (err == Z_OK) {
+      if (nRecovered != NULL) {
+        *nRecovered = entries;
+      }
+      if (bytesRecovered != NULL) {
+        *bytesRecovered = totalBytes;
+      }
+    }
+  } else {
+    err = Z_STREAM_ERROR;
+  }
+  return err;
+}

contrib/minizip/mztools.h

@@ -0,0 +1,31 @@
+/*
+  Additional tools for Minizip
+  Code: Xavier Roche '2004
+  License: Same as ZLIB (www.gzip.org)
+*/
+
+#ifndef _zip_tools_H
+#define _zip_tools_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef _ZLIB_H
+#include "zlib.h"
+#endif
+
+#include "unzip.h"
+
+/* Repair a ZIP file (missing central directory) 
+   file: file to recover
+   fileOut: output file after recovery
+   fileOutTmp: temporary file name used for recovery
+*/
+extern int ZEXPORT unzRepair(const char* file, 
+                             const char* fileOut, 
+                             const char* fileOutTmp, 
+                             uLong* nRecovered,
+                             uLong* bytesRecovered);
+
+#endif

contrib/minizip/unzip.c

@@ -1,7 +1,7 @@
 /* unzip.c -- IO for uncompress .zip files using zlib
-   Version 1.00, September 10th, 2003
+   Version 1.01e, February 12th, 2005
 
-   Copyright (C) 1998-2003 Gilles Vollant
+   Copyright (C) 1998-2005 Gilles Vollant
 
    Read unzip.h for more info
 */
@@ -88,7 +88,7 @@ woven in by Terry Thorsen 1/2003.
 
 
 const char unz_copyright[] =
-   " unzip 1.00 Copyright 1998-2003 Gilles Vollant - http://www.winimage.com/zLibDll";
+   " unzip 1.01 Copyright 1998-2004 Gilles Vollant - http://www.winimage.com/zLibDll";
 
 /* unz_file_info_interntal contain internal info about a file in zipfile*/
 typedef struct unz_file_info_internal_s
@@ -798,6 +798,7 @@ extern int ZEXPORT unzGoToNextFile (file)
     s=(unz_s*)file;
     if (!s->current_file_ok)
         return UNZ_END_OF_LIST_OF_FILE;
+    if (s->gi.number_entry != 0xffff)    /* 2^16 files overflow hack */
       if (s->num_file+1==s->gi.number_entry)
         return UNZ_END_OF_LIST_OF_FILE;
 
@@ -1136,7 +1137,10 @@ extern int ZEXPORT unzOpenCurrentFile3 (file, method, level, raw, password)
       if (err == Z_OK)
         pfile_in_zip_read_info->stream_initialised=1;
       else
+      {
+        TRYFREE(pfile_in_zip_read_info);
         return err;
+      }
         /* windowBits is passed < 0 to tell that there is no zlib header.
          * Note that in this case inflate *requires* an extra "dummy" byte
          * after the compressed stream in order to complete decompression and
@@ -1244,10 +1248,18 @@ extern int ZEXPORT unzReadCurrentFile  (file, buf, len)
 
     pfile_in_zip_read_info->stream.avail_out = (uInt)len;
 
-    if (len>pfile_in_zip_read_info->rest_read_uncompressed)
+    if ((len>pfile_in_zip_read_info->rest_read_uncompressed) &&
+        (!(pfile_in_zip_read_info->raw)))
         pfile_in_zip_read_info->stream.avail_out =
             (uInt)pfile_in_zip_read_info->rest_read_uncompressed;
 
+    if ((len>pfile_in_zip_read_info->rest_read_compressed+
+           pfile_in_zip_read_info->stream.avail_in) &&
+         (pfile_in_zip_read_info->raw))
+        pfile_in_zip_read_info->stream.avail_out =
+            (uInt)pfile_in_zip_read_info->rest_read_compressed+
+            pfile_in_zip_read_info->stream.avail_in;
+
     while (pfile_in_zip_read_info->stream.avail_out>0)
     {
         if ((pfile_in_zip_read_info->stream.avail_in==0) &&
@@ -1339,6 +1351,9 @@ extern int ZEXPORT unzReadCurrentFile  (file, buf, len)
             */
             err=inflate(&pfile_in_zip_read_info->stream,flush);
 
+            if ((err>=0) && (pfile_in_zip_read_info->stream.msg!=NULL))
+              err = Z_DATA_ERROR;
+
             uTotalOutAfter = pfile_in_zip_read_info->stream.total_out;
             uOutThis = uTotalOutAfter-uTotalOutBefore;
 
@@ -1461,7 +1476,7 @@ extern int ZEXPORT unzGetLocalExtrafield (file,buf,len)
 
     if (ZREAD(pfile_in_zip_read_info->z_filefunc,
               pfile_in_zip_read_info->filestream,
-              buf,size_to_read)!=size_to_read)
+              buf,read_now)!=read_now)
         return UNZ_ERRNO;
 
     return (int)read_now;
@@ -1544,3 +1559,40 @@ extern int ZEXPORT unzGetGlobalComment (file, szComment, uSizeBuf)
         *(szComment+s->gi.size_comment)='\0';
     return (int)uReadThis;
 }
+
+/* Additions by RX '2004 */
+extern uLong ZEXPORT unzGetOffset (file)
+    unzFile file;
+{
+    unz_s* s;
+
+    if (file==NULL)
+          return UNZ_PARAMERROR;
+    s=(unz_s*)file;
+    if (!s->current_file_ok)
+      return 0;
+    if (s->gi.number_entry != 0 && s->gi.number_entry != 0xffff)
+      if (s->num_file==s->gi.number_entry)
+         return 0;
+    return s->pos_in_central_dir;
+}
+
+extern int ZEXPORT unzSetOffset (file, pos)
+        unzFile file;
+        uLong pos;
+{
+    unz_s* s;
+    int err;
+
+    if (file==NULL)
+        return UNZ_PARAMERROR;
+    s=(unz_s*)file;
+
+    s->pos_in_central_dir = pos;
+    s->num_file = s->gi.number_entry;      /* hack */
+    err = unzlocal_GetCurrentFileInfoInternal(file,&s->cur_file_info,
+                                              &s->cur_file_info_internal,
+                                              NULL,0,NULL,0,NULL,0);
+    s->current_file_ok = (err == UNZ_OK);
+    return err;
+}

contrib/minizip/unzip.h

@@ -1,11 +1,13 @@
 /* unzip.h -- IO for uncompress .zip files using zlib
-   Version 1.00, September 10th, 2003
+   Version 1.01e, February 12th, 2005
 
-   Copyright (C) 1998-2003 Gilles Vollant
+   Copyright (C) 1998-2005 Gilles Vollant
 
    This unzip package allow extract file from .ZIP file, compatible with PKZip 2.04g
      WinZip, InfoZip tools and compatible.
-   Encryption and multi volume ZipFile (span) are not supported.
+
+   Multi volume ZipFile (span) are not supported.
+   Encryption compatible with pkzip 2.04g only supported
    Old compressions used by old PKZip 1.x are not supported
 
 
@@ -335,6 +337,16 @@ extern int ZEXPORT unzGetLocalExtrafield OF((unzFile file,
     the error code
 */
 
+/***************************************************************************/
+
+/* Get the current file offset */
+extern uLong ZEXPORT unzGetOffset (unzFile file);
+
+/* Set the current file offset */
+extern int ZEXPORT unzSetOffset (unzFile file, uLong pos);
+
+
+
 #ifdef __cplusplus
 }
 #endif

contrib/minizip/zip.c

@@ -1,7 +1,10 @@
 /* zip.c -- IO on .zip files using zlib
-   Version 1.00, September 10th, 2003
+   Version 1.01e, February 12th, 2005
 
-   Copyright (C) 1998-2003 Gilles Vollant
+   27 Dec 2004 Rolf Kalbermatter
+   Modification to zipOpen2 to support globalComment retrieval.
+
+   Copyright (C) 1998-2005 Gilles Vollant
 
    Read zip.h for more info
 */
@@ -77,7 +80,7 @@
 #endif
 #endif
 const char zip_copyright[] =
-   " zip 1.00 Copyright 1998-2003 Gilles Vollant - http://www.winimage.com/zLibDll";
+   " zip 1.01 Copyright 1998-2004 Gilles Vollant - http://www.winimage.com/zLibDll";
 
 
 #define SIZEDATA_INDATABLOCK (4096-(4*4))
@@ -143,6 +146,9 @@ typedef struct
     uLong begin_pos;            /* position of the beginning of the zipfile */
     uLong add_position_when_writting_offset;
     uLong number_entry;
+#ifndef NO_ADDFILEINEXISTINGZIP
+    char *globalcomment;
+#endif
 } zip_internal;
 
 
@@ -265,10 +271,19 @@ local int ziplocal_putValue (pzlib_filefunc_def, filestream, x, nbByte)
 {
     unsigned char buf[4];
     int n;
-    for (n = 0; n < nbByte; n++) {
+    for (n = 0; n < nbByte; n++)
+    {
         buf[n] = (unsigned char)(x & 0xff);
         x >>= 8;
     }
+    if (x != 0)
+      {     /* data overflow - hack for ZIP64 (X Roche) */
+      for (n = 0; n < nbByte; n++)
+        {
+          buf[n] = 0xff;
+        }
+      }
+
     if (ZWRITE(*pzlib_filefunc_def,filestream,buf,nbByte)!=(uLong)nbByte)
         return ZIP_ERRNO;
     else
@@ -287,7 +302,16 @@ local void ziplocal_putValue_inmemory (dest, x, nbByte)
         buf[n] = (unsigned char)(x & 0xff);
         x >>= 8;
     }
+
+    if (x != 0)
+    {     /* data overflow - hack for ZIP64 */
+       for (n = 0; n < nbByte; n++)
+       {
+          buf[n] = 0xff;
+       }
+    }
 }
+
 /****************************************************************************/
 
 
@@ -514,6 +538,7 @@ extern zipFile ZEXPORT zipOpen2 (pathname, append, globalcomment, pzlib_filefunc
 
     /* now we add file in a zipfile */
 #    ifndef NO_ADDFILEINEXISTINGZIP
+    ziinit.globalcomment = NULL;
     if (append == APPEND_STATUS_ADDINZIP)
     {
         uLong byte_before_the_zipfile;/* byte before the zipfile, (>0 for sfx)*/
@@ -574,7 +599,7 @@ extern zipFile ZEXPORT zipOpen2 (pathname, append, globalcomment, pzlib_filefunc
         if (ziplocal_getLong(&ziinit.z_filefunc, ziinit.filestream,&offset_central_dir)!=ZIP_OK)
             err=ZIP_ERRNO;
 
-        /* zipfile comment length */
+        /* zipfile global comment length */
         if (ziplocal_getShort(&ziinit.z_filefunc, ziinit.filestream,&size_comment)!=ZIP_OK)
             err=ZIP_ERRNO;
 
@@ -588,9 +613,19 @@ extern zipFile ZEXPORT zipOpen2 (pathname, append, globalcomment, pzlib_filefunc
             return NULL;
         }
 
+        if (size_comment>0)
+        {
+            ziinit.globalcomment = ALLOC(size_comment+1);
+            if (ziinit.globalcomment)
+            {
+               size_comment = ZREAD(ziinit.z_filefunc, ziinit.filestream,ziinit.globalcomment,size_comment);
+               ziinit.globalcomment[size_comment]=0;
+            }
+        }
+
         byte_before_the_zipfile = central_pos -
                                 (offset_central_dir+size_central_dir);
-        ziinit.add_position_when_writting_offset = byte_before_the_zipfile ;
+        ziinit.add_position_when_writting_offset = byte_before_the_zipfile;
 
         {
             uLong size_central_dir_to_read = size_central_dir;
@@ -623,10 +658,18 @@ extern zipFile ZEXPORT zipOpen2 (pathname, append, globalcomment, pzlib_filefunc
                   offset_central_dir+byte_before_the_zipfile,ZLIB_FILEFUNC_SEEK_SET)!=0)
             err=ZIP_ERRNO;
     }
+
+    if (globalcomment)
+    {
+      *globalcomment = ziinit.globalcomment;
+    }
 #    endif /* !NO_ADDFILEINEXISTINGZIP*/
 
     if (err != ZIP_OK)
     {
+#    ifndef NO_ADDFILEINEXISTINGZIP
+        TRYFREE(ziinit.globalcomment);
+#    endif /* !NO_ADDFILEINEXISTINGZIP*/
         TRYFREE(zi);
         return NULL;
     }
@@ -699,9 +742,9 @@ extern int ZEXPORT zipOpenNewFileInZip3 (file, filename, zipfi,
     if (comment==NULL)
         size_comment = 0;
     else
-        size_comment = strlen(comment);
+        size_comment = (uInt)strlen(comment);
 
-    size_filename = strlen(filename);
+    size_filename = (uInt)strlen(filename);
 
     if (zipfi == NULL)
         zi->ci.dosDate = 0;
@@ -1094,7 +1137,7 @@ extern int ZEXPORT zipClose (file, global_comment)
     zip_internal* zi;
     int err = 0;
     uLong size_centraldir = 0;
-    uLong centraldir_pos_inzip ;
+    uLong centraldir_pos_inzip;
     uInt size_global_comment;
     if (file == NULL)
         return ZIP_PARAMERROR;
@@ -1105,11 +1148,14 @@ extern int ZEXPORT zipClose (file, global_comment)
         err = zipCloseFileInZip (file);
     }
 
+#ifndef NO_ADDFILEINEXISTINGZIP
+    if (global_comment==NULL)
+        global_comment = zi->globalcomment;
+#endif
     if (global_comment==NULL)
         size_global_comment = 0;
     else
-        size_global_comment = strlen(global_comment);
+        size_global_comment = (uInt)strlen(global_comment);
-
 
     centraldir_pos_inzip = ZTELL(zi->z_filefunc,zi->filestream);
     if (err==ZIP_OK)
@@ -1164,6 +1210,9 @@ extern int ZEXPORT zipClose (file, global_comment)
         if (err == ZIP_OK)
             err = ZIP_ERRNO;
 
+#ifndef NO_ADDFILEINEXISTINGZIP
+    TRYFREE(zi->globalcomment);
+#endif
     TRYFREE(zi);
 
     return err;

contrib/minizip/zip.h

@@ -1,11 +1,12 @@
 /* zip.h -- IO for compress .zip files using zlib
-   Version 1.00, September 10th, 2003
+   Version 1.01e, February 12th, 2005
 
-   Copyright (C) 1998-2003 Gilles Vollant
+   Copyright (C) 1998-2005 Gilles Vollant
 
    This unzip package allow creates .ZIP file, compatible with PKZip 2.04g
      WinZip, InfoZip tools and compatible.
-   Encryption and multi volume ZipFile (span) are not supported.
+   Multi volume ZipFile (span) are not supported.
+   Encryption compatible with pkzip 2.04g only supported
    Old compressions used by old PKZip 1.x are not supported
 
   For uncompress .zip file, look at unzip.h
@@ -212,7 +213,6 @@ extern int ZEXPORT zipCloseFileInZip OF((zipFile file));
   Close the current file in the zipfile
 */
 
-
 extern int ZEXPORT zipCloseFileInZipRaw OF((zipFile file,
                                             uLong uncompressed_size,
                                             uLong crc32));

contrib/pascal/zlibpas.pas

@@ -10,7 +10,7 @@ unit zlibpas;
 interface
 
 const
-  ZLIB_VERSION = '1.2.1';
+  ZLIB_VERSION = '1.2.3';
 
 type
   alloc_func = function(opaque: Pointer; items, size: Integer): Pointer;

contrib/puff/puff.c

@@ -1,8 +1,8 @@
 /*
  * puff.c
- * Copyright (C) 2002, 2003 Mark Adler
+ * Copyright (C) 2002-2004 Mark Adler
  * For conditions of distribution and use, see copyright notice in puff.h
- * version 1.7, 3 Mar 2003
+ * version 1.8, 9 Jan 2004
  *
  * puff.c is a simple inflate written to be an unambiguous way to specify the
  * deflate format.  It is not written for speed but rather simplicity.  As a
@@ -60,6 +60,7 @@
  * 1.6   7 Aug 2002     - Minor format changes
  * 1.7   3 Mar 2003     - Added test code for distribution
  *                      - Added zlib-like license
+ * 1.8   9 Jan 2004     - Added some comments on no distance codes case
  */
 
 #include <setjmp.h>             /* for setjmp(), longjmp(), and jmp_buf */
@@ -577,6 +578,9 @@ local int fixed(struct state *s)
  *   block is fewer bits), but it is allowed by the format.  So incomplete
  *   literal/length codes of one symbol should also be permitted.
  *
+ * - If there are only literal codes and no lengths, then there are no distance
+ *   codes.  This is represented by one distance code with zero bits.
+ *
  * - The list of up to 286 length/literal lengths and up to 30 distance lengths
  *   are themselves compressed using Huffman codes and run-length encoding.  In
  *   the list of code lengths, a 0 symbol means no code, a 1..15 symbol means

contrib/testzlib/testzlib.c

@@ -1,9 +1,121 @@
-
 #include <stdio.h>
 #include <stdlib.h>
 #include <windows.h>
+
 #include "zlib.h"
 
+
+void MyDoMinus64(LARGE_INTEGER *R,LARGE_INTEGER A,LARGE_INTEGER B)
+{
+    R->HighPart = A.HighPart - B.HighPart;
+    if (A.LowPart >= B.LowPart)
+        R->LowPart = A.LowPart - B.LowPart;
+    else
+    {
+        R->LowPart = A.LowPart - B.LowPart;
+        R->HighPart --;
+    }
+}
+
+#ifdef _M_X64
+// see http://msdn2.microsoft.com/library/twchhe95(en-us,vs.80).aspx for __rdtsc
+unsigned __int64 __rdtsc(void);
+void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64)
+{
+ //   printf("rdtsc = %I64x\n",__rdtsc());
+   pbeginTime64->QuadPart=__rdtsc();
+}
+
+LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf)
+{
+    LARGE_INTEGER LIres;
+    unsigned _int64 res=__rdtsc()-((unsigned _int64)(beginTime64.QuadPart));
+    LIres.QuadPart=res;
+   // printf("rdtsc = %I64x\n",__rdtsc());
+    return LIres;
+}
+#else
+#ifdef _M_IX86
+void myGetRDTSC32(LARGE_INTEGER * pbeginTime64)
+{
+    DWORD dwEdx,dwEax;
+    _asm
+    {
+        rdtsc
+        mov dwEax,eax
+        mov dwEdx,edx
+    }
+    pbeginTime64->LowPart=dwEax;
+    pbeginTime64->HighPart=dwEdx;
+}
+
+void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64)
+{
+    myGetRDTSC32(pbeginTime64);
+}
+
+LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf)
+{
+    LARGE_INTEGER LIres,endTime64;
+    myGetRDTSC32(&endTime64);
+
+    LIres.LowPart=LIres.HighPart=0;
+    MyDoMinus64(&LIres,endTime64,beginTime64);
+    return LIres;
+}
+#else
+void myGetRDTSC32(LARGE_INTEGER * pbeginTime64)
+{
+}
+
+void BeginCountRdtsc(LARGE_INTEGER * pbeginTime64)
+{
+}
+
+LARGE_INTEGER GetResRdtsc(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf)
+{
+    LARGE_INTEGER lr;
+    lr.QuadPart=0;
+    return lr;
+}
+#endif
+#endif
+
+void BeginCountPerfCounter(LARGE_INTEGER * pbeginTime64,BOOL fComputeTimeQueryPerf)
+{
+    if ((!fComputeTimeQueryPerf) || (!QueryPerformanceCounter(pbeginTime64)))
+    {
+        pbeginTime64->LowPart = GetTickCount();
+        pbeginTime64->HighPart = 0;
+    }
+}
+
+DWORD GetMsecSincePerfCounter(LARGE_INTEGER beginTime64,BOOL fComputeTimeQueryPerf)
+{
+    LARGE_INTEGER endTime64,ticksPerSecond,ticks;
+    DWORDLONG ticksShifted,tickSecShifted;
+    DWORD dwLog=16+0;
+    DWORD dwRet;
+    if ((!fComputeTimeQueryPerf) || (!QueryPerformanceCounter(&endTime64)))
+        dwRet = (GetTickCount() - beginTime64.LowPart)*1;
+    else
+    {
+        MyDoMinus64(&ticks,endTime64,beginTime64);
+        QueryPerformanceFrequency(&ticksPerSecond);
+
+    
+        {
+            ticksShifted = Int64ShrlMod32(*(DWORDLONG*)&ticks,dwLog);
+            tickSecShifted = Int64ShrlMod32(*(DWORDLONG*)&ticksPerSecond,dwLog);
+        
+        } 
+
+        dwRet = (DWORD)((((DWORD)ticksShifted)*1000)/(DWORD)(tickSecShifted));
+        dwRet *=1;
+    }
+    return dwRet;
+}
+
 int ReadFileMemory(const char* filename,long* plFileSize,void** pFilePtr)
 {
     FILE* stream;
@@ -43,7 +155,8 @@ int main(int argc, char *argv[])
     unsigned char* CprPtr;
     unsigned char* UncprPtr;
     long lSizeCpr,lSizeUncpr;
-    DWORD dwGetTick;
+    DWORD dwGetTick,dwMsecQP;
+    LARGE_INTEGER li_qp,li_rdtsc,dwResRdtsc;
 
     if (argc<=1)
     {
@@ -71,9 +184,10 @@ int main(int argc, char *argv[])
     lBufferSizeUncpr = lBufferSizeCpr;
 
     CprPtr=(unsigned char*)malloc(lBufferSizeCpr + BlockSizeCompress);
-    UncprPtr=(unsigned char*)malloc(lBufferSizeUncpr + BlockSizeUncompress);
 
+    BeginCountPerfCounter(&li_qp,TRUE);
     dwGetTick=GetTickCount();
+    BeginCountRdtsc(&li_rdtsc);
     {
         z_stream zcpr;
         int ret=Z_OK;
@@ -101,11 +215,20 @@ int main(int argc, char *argv[])
         lSizeCpr=zcpr.total_out;
         deflateEnd(&zcpr);
         dwGetTick=GetTickCount()-dwGetTick;
+        dwMsecQP=GetMsecSincePerfCounter(li_qp,TRUE);
+        dwResRdtsc=GetResRdtsc(li_rdtsc,TRUE);
         printf("total compress size = %u, in %u step\n",lSizeCpr,step);
-        printf("time = %u msec = %f sec\n\n",dwGetTick,dwGetTick/(double)1000.);
+        printf("time = %u msec = %f sec\n",dwGetTick,dwGetTick/(double)1000.);
+        printf("defcpr time QP = %u msec = %f sec\n",dwMsecQP,dwMsecQP/(double)1000.);
+        printf("defcpr result rdtsc = %I64x\n\n",dwResRdtsc.QuadPart);
     }
 
+    CprPtr=(unsigned char*)realloc(CprPtr,lSizeCpr);
+    UncprPtr=(unsigned char*)malloc(lBufferSizeUncpr + BlockSizeUncompress);
+
+    BeginCountPerfCounter(&li_qp,TRUE);
     dwGetTick=GetTickCount();
+    BeginCountRdtsc(&li_rdtsc);
     {
         z_stream zcpr;
         int ret=Z_OK;
@@ -133,8 +256,12 @@ int main(int argc, char *argv[])
         lSizeUncpr=zcpr.total_out;
         inflateEnd(&zcpr);
         dwGetTick=GetTickCount()-dwGetTick;
+        dwMsecQP=GetMsecSincePerfCounter(li_qp,TRUE);
+        dwResRdtsc=GetResRdtsc(li_rdtsc,TRUE);
         printf("total uncompress size = %u, in %u step\n",lSizeUncpr,step);
-        printf("time = %u msec = %f sec\n\n",dwGetTick,dwGetTick/(double)1000.);
+        printf("time = %u msec = %f sec\n",dwGetTick,dwGetTick/(double)1000.);
+        printf("uncpr  time QP = %u msec = %f sec\n",dwMsecQP,dwMsecQP/(double)1000.);
+        printf("uncpr  result rdtsc = %I64x\n\n",dwResRdtsc.QuadPart);
     }
 
     if (lSizeUncpr==lFileSize)
@@ -145,5 +272,4 @@ int main(int argc, char *argv[])
     }
 
     return 0;
-
 }

contrib/testzlib/testzlib.sln

@@ -1,21 +0,0 @@
-Microsoft Visual Studio Solution File, Format Version 7.00
-Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testzlib", "testzlib.vcproj", "{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}"
-EndProject
-Global
-	GlobalSection(SolutionConfiguration) = preSolution
-		ConfigName.0 = Debug
-		ConfigName.1 = Release
-	EndGlobalSection
-	GlobalSection(ProjectDependencies) = postSolution
-	EndGlobalSection
-	GlobalSection(ProjectConfiguration) = postSolution
-		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug.ActiveCfg = Debug|Win32
-		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug.Build.0 = Debug|Win32
-		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release.ActiveCfg = Release|Win32
-		{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release.Build.0 = Release|Win32
-	EndGlobalSection
-	GlobalSection(ExtensibilityGlobals) = postSolution
-	EndGlobalSection
-	GlobalSection(ExtensibilityAddIns) = postSolution
-	EndGlobalSection
-EndGlobal

contrib/testzlib/testzlib.txt

@@ -0,0 +1,10 @@
+To build testzLib with Visual Studio 2005:
+
+copy to a directory file from :
+- root of zLib tree
+- contrib/testzlib
+- contrib/masmx86
+- contrib/masmx64
+- contrib/vstudio/vc7
+
+and open testzlib8.sln

contrib/untgz/untgz.c

@@ -1,7 +1,7 @@
 /*
  * untgz.c -- Display contents and extract files from a gzip'd TAR file
  *
- * written by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+ * written by Pedro A. Aranda Gutierrez <paag@tid.es>
  * adaptation to Unix by Jean-loup Gailly <jloup@gzip.org>
  * various fixes by Cosmin Truta <cosmint@cs.ubbcluj.ro>
  */
@@ -28,8 +28,9 @@
 #  endif
 #  define mkdir(dirname,mode)   _mkdir(dirname)
 #  ifdef _MSC_VER
-#    define strdup(str)         _strdup(str)
 #    define access(path,mode)   _access(path,mode)
+#    define chmod(path,mode)    _chmod(path,mode)
+#    define strdup(str)         _strdup(str)
 #  endif
 #else
 #  include <utime.h>
@@ -48,7 +49,21 @@
 #define FIFOTYPE '6'            /* FIFO special */
 #define CONTTYPE '7'            /* reserved */
 
+/* GNU tar extensions */
+
+#define GNUTYPE_DUMPDIR  'D'    /* file names from dumped directory */
+#define GNUTYPE_LONGLINK 'K'    /* long link name */
+#define GNUTYPE_LONGNAME 'L'    /* long file name */
+#define GNUTYPE_MULTIVOL 'M'    /* continuation of file from another volume */
+#define GNUTYPE_NAMES    'N'    /* file name that does not fit into main hdr */
+#define GNUTYPE_SPARSE   'S'    /* sparse file */
+#define GNUTYPE_VOLHDR   'V'    /* tape/volume header */
+
+
+/* tar header */
+
 #define BLOCKSIZE     512
+#define SHORTNAMESIZE 100
 
 struct tar_header
 {                               /* byte offset */
@@ -71,11 +86,20 @@ struct tar_header
                                 /* 500 */
 };
 
-union tar_buffer {
+union tar_buffer
+{
   char               buffer[BLOCKSIZE];
   struct tar_header  header;
 };
 
+struct attr_item
+{
+  struct attr_item  *next;
+  char              *fname;
+  int                mode;
+  time_t             time;
+};
+
 enum { TGZ_EXTRACT, TGZ_LIST, TGZ_INVALID };
 
 char *TGZfname          OF((const char *));
@@ -84,6 +108,9 @@ void TGZnotfound        OF((const char *));
 int getoct              OF((char *, int));
 char *strtime           OF((time_t *));
 int setfiletime         OF((char *, time_t));
+void push_attr          OF((struct attr_item **, char *, int, time_t));
+void restore_attr       OF((struct attr_item **));
+
 int ExprMatch           OF((char *, char *));
 
 int makedir             OF((char *));
@@ -221,7 +248,42 @@ int setfiletime (char *fname,time_t ftime)
 }
 
 
-/* regular expression matching */
+/* push file attributes */
+
+void push_attr(struct attr_item **list,char *fname,int mode,time_t time)
+{
+  struct attr_item *item;
+
+  item = (struct attr_item *)malloc(sizeof(struct attr_item));
+  if (item == NULL)
+    error("Out of memory");
+  item->fname = strdup(fname);
+  item->mode  = mode;
+  item->time  = time;
+  item->next  = *list;
+  *list       = item;
+}
+
+
+/* restore file attributes */
+
+void restore_attr(struct attr_item **list)
+{
+  struct attr_item *item, *prev;
+
+  for (item = *list; item != NULL; )
+    {
+      setfiletime(item->fname,item->time);
+      chmod(item->fname,item->mode);
+      prev = item;
+      item = item->next;
+      free(prev);
+    }
+  *list = NULL;
+}
+
+
+/* match regular expression */
 
 #define ISSPECIAL(c) (((c) == '*') || ((c) == '/'))
 
@@ -332,6 +394,7 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
   char   fname[BLOCKSIZE];
   int    tarmode;
   time_t tartime;
+  struct attr_item *attributes = NULL;
 
   if (action == TGZ_LIST)
     printf("    date      time     size                       file\n"
@@ -354,14 +417,15 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
       /*
        * If we have to get a tar header
        */
-      if (getheader == 1)
+      if (getheader >= 1)
         {
           /*
            * if we met the end of the tar
            * or the end-of-tar block,
            * we are done
            */
-          if ((len == 0) || (buffer.header.name[0] == 0)) break;
+          if (len == 0 || buffer.header.name[0] == 0)
+            break;
 
           tarmode = getoct(buffer.header.mode,8);
           tartime = (time_t)getoct(buffer.header.mtime,12);
@@ -371,8 +435,25 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
               action = TGZ_INVALID;
             }
 
-          strcpy(fname,buffer.header.name);
+          if (getheader == 1)
+            {
+              strncpy(fname,buffer.header.name,SHORTNAMESIZE);
+              if (fname[SHORTNAMESIZE-1] != 0)
+                  fname[SHORTNAMESIZE] = 0;
+            }
+          else
+            {
+              /*
+               * The file name is longer than SHORTNAMESIZE
+               */
+              if (strncmp(fname,buffer.header.name,SHORTNAMESIZE-1) != 0)
+                  error("bad long name");
+              getheader = 1;
+            }
 
+          /*
+           * Act according to the type flag
+           */
           switch (buffer.header.typeflag)
             {
             case DIRTYPE:
@@ -381,7 +462,7 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
               if (action == TGZ_EXTRACT)
                 {
                   makedir(fname);
-                  setfiletime(fname,tartime);
+                  push_attr(&attributes,fname,tarmode,tartime);
                 }
               break;
             case REGTYPE:
@@ -419,6 +500,24 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
                 }
               getheader = 0;
               break;
+            case GNUTYPE_LONGLINK:
+            case GNUTYPE_LONGNAME:
+              remaining = getoct(buffer.header.size,12);
+              if (remaining < 0 || remaining >= BLOCKSIZE)
+                {
+                  action = TGZ_INVALID;
+                  break;
+                }
+              len = gzread(in, fname, BLOCKSIZE);
+              if (len < 0)
+                error(gzerror(in, &err));
+              if (fname[BLOCKSIZE-1] != 0 || (int)strlen(fname) > remaining)
+                {
+                  action = TGZ_INVALID;
+                  break;
+                }
+              getheader = 2;
+              break;
             default:
               if (action == TGZ_LIST)
                 printf(" %s     <---> %s\n",strtime(&tartime),fname);
@@ -433,7 +532,8 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
             {
               if (fwrite(&buffer,sizeof(char),bytes,outfile) != bytes)
                 {
-                  fprintf(stderr,"%s: Error writing %s -- skipping\n",prog,fname);
+                  fprintf(stderr,
+                    "%s: Error writing %s -- skipping\n",prog,fname);
                   fclose(outfile);
                   outfile = NULL;
                   remove(fname);
@@ -450,7 +550,7 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
               fclose(outfile);
               outfile = NULL;
               if (action != TGZ_INVALID)
-                setfiletime(fname,tartime);
+                push_attr(&attributes,fname,tarmode,tartime);
             }
         }
 
@@ -464,6 +564,11 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
         }
     }
 
+  /*
+   * Restore file modes and time stamps
+   */
+  restore_attr(&attributes);
+
   if (gzclose(in) != Z_OK)
     error("failed gzclose");
 
@@ -475,7 +580,7 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
 
 void help(int exitval)
 {
-  printf("untgz version 0.2\n"
+  printf("untgz version 0.2.1\n"
          "  using zlib version %s\n\n",
          zlibVersion());
   printf("Usage: untgz file.tgz            extract all files\n"

contrib/vstudio/readme.txt

@@ -1,8 +1,8 @@
-Building instructions for the DLL versions of Zlib 1.21
+Building instructions for the DLL versions of Zlib 1.2.3
-=======================================================
+========================================================
 
 This directory contains projects that build zlib and minizip using
-Microsoft Visual C++ 7.0/7.1.
+Microsoft Visual C++ 7.0/7.1, and Visual C++ .
 
 You don't need to build these projects yourself. You can download the
 binaries from:
@@ -11,18 +11,36 @@ binaries from:
 More information can be found at this site.
 
 
-Build instructions
+Build instructions for Visual Studio 7.x (32 bits)
-------------------
+--------------------------------------------------
-- Unzip zlib*.zip and copy the files from contrib\vstudio\vc7,
+- Uncompress current zlib, including all contrib/* files
-  from contrib\vstudio\masmx86 and from contrib\minizip into the same
-  directory.
 - Download the crtdll library from
     http://www.winimage.com/zLibDll/crtdll.zip
-  Unzip crtdll.zip to extract crtdll.lib.
+  Unzip crtdll.zip to extract crtdll.lib on contrib\vstudio\vc7.
-- If you are using x86, use the Release target.
+- Open contrib\vstudio\vc7\zlibvc.sln with Microsoft Visual C++ 7.x
-- Open zlibvc.sln with Microsoft Visual C++ 7.0 or 7.1
   (Visual Studio .Net 2002 or 2003).
 
+Build instructions for Visual Studio 2005 (32 bits or 64 bits)
+--------------------------------------------------------------
+- Uncompress current zlib, including all contrib/* files
+- For 32 bits only: download the crtdll library from
+    http://www.winimage.com/zLibDll/crtdll.zip
+  Unzip crtdll.zip to extract crtdll.lib on contrib\vstudio\vc8.
+- Open contrib\vstudio\vc8\zlibvc.sln with Microsoft Visual C++ 8.0
+
+Build instructions for Visual Studio 2005 64 bits, PSDK compiler
+----------------------------------------------------------------
+at the time of writing this text file, Visual Studio 2005 (and 
+  Microsoft Visual C++ 8.0) is on the beta 2 stage.
+Using you can get the free 64 bits compiler from Platform SDK, 
+  which is NOT a beta, and compile using the Visual studio 2005 IDE
+see http://www.winimage.com/misc/sdk64onvs2005/ for instruction
+
+- Uncompress current zlib, including all contrib/* files
+- start Visual Studio 2005 from a platform SDK command prompt, using
+  the /useenv switch
+- Open contrib\vstudio\vc8\zlibvc.sln with Microsoft Visual C++ 8.0
+
 
 Important
 ---------

contrib/vstudio/vc7/miniunz.vcproj

@@ -19,6 +19,7 @@
 			<Tool
 				Name="VCCLCompilerTool"
 				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
 				PreprocessorDefinitions="WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE"
 				MinimalRebuild="TRUE"
 				BasicRuntimeChecks="3"
@@ -63,6 +64,7 @@
 				Optimization="2"
 				InlineFunctionExpansion="1"
 				OmitFramePointers="TRUE"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
 				PreprocessorDefinitions="WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE"
 				StringPooling="TRUE"
 				RuntimeLibrary="4"
@@ -104,7 +106,7 @@
 			Name="Source Files"
 			Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm">
 			<File
-				RelativePath="miniunz.c">
+				RelativePath="..\..\minizip\miniunz.c">
 			</File>
 		</Filter>
 		<Filter
@@ -116,7 +118,7 @@
 			Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe">
 		</Filter>
 		<File
-			RelativePath="zlibwapi.lib">
+			RelativePath="ReleaseDll\zlibwapi.lib">
 		</File>
 	</Files>
 	<Globals>

contrib/vstudio/vc7/minizip.vcproj

@@ -19,6 +19,7 @@
 			<Tool
 				Name="VCCLCompilerTool"
 				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
 				PreprocessorDefinitions="WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE"
 				MinimalRebuild="TRUE"
 				BasicRuntimeChecks="3"
@@ -63,6 +64,7 @@
 				Optimization="2"
 				InlineFunctionExpansion="1"
 				OmitFramePointers="TRUE"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
 				PreprocessorDefinitions="WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE"
 				StringPooling="TRUE"
 				RuntimeLibrary="4"
@@ -104,7 +106,7 @@
 			Name="Source Files"
 			Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm">
 			<File
-				RelativePath="minizip.c">
+				RelativePath="..\..\minizip\minizip.c">
 			</File>
 		</Filter>
 		<Filter
@@ -116,7 +118,7 @@
 			Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe">
 		</Filter>
 		<File
-			RelativePath="zlibwapi.lib">
+			RelativePath="ReleaseDll\zlibwapi.lib">
 		</File>
 	</Files>
 	<Globals>

contrib/vstudio/vc7/testzlib.vcproj

@@ -2,8 +2,8 @@
 <VisualStudioProject
 	ProjectType="Visual C++"
 	Version="7.00"
-	Name="testzlib"
+	Name="testZlibDll"
-	ProjectGUID="{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}"
+	ProjectGUID="{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}"
 	Keyword="Win32Proj">
 	<Platforms>
 		<Platform
@@ -19,6 +19,7 @@
 			<Tool
 				Name="VCCLCompilerTool"
 				Optimization="0"
+				AdditionalIncludeDirectories="..\..\.."
 				PreprocessorDefinitions="WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE"
 				MinimalRebuild="TRUE"
 				BasicRuntimeChecks="3"
@@ -63,6 +64,7 @@
 				Optimization="2"
 				InlineFunctionExpansion="1"
 				OmitFramePointers="TRUE"
+				AdditionalIncludeDirectories="..\..\.."
 				PreprocessorDefinitions="WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE"
 				StringPooling="TRUE"
 				RuntimeLibrary="4"
@@ -104,7 +106,7 @@
 			Name="Source Files"
 			Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm">
 			<File
-				RelativePath="testzlib.c">
+				RelativePath="..\..\testzlib\testzlib.c">
 			</File>
 		</Filter>
 		<Filter
@@ -116,7 +118,7 @@
 			Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe">
 		</Filter>
 		<File
-			RelativePath="zlibwapi.lib">
+			RelativePath="ReleaseDll\zlibwapi.lib">
 		</File>
 	</Files>
 	<Globals>

contrib/vstudio/vc7/zlib.rc

@@ -2,8 +2,8 @@
 
 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1,2,1,0
+  FILEVERSION	 1,2,3,1
-  PRODUCTVERSION 1,2,1,0
+  PRODUCTVERSION 1,2,3,1
   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
   FILEFLAGS	0
   FILEOS	VOS_DOS_WINDOWS32
@@ -17,7 +17,7 @@ BEGIN
 
     BEGIN
       VALUE "FileDescription", "zlib data compression library\0"
-      VALUE "FileVersion",	"1.2.1.0\0"
+      VALUE "FileVersion",	"1.2.3.1\0"
       VALUE "InternalName",	"zlib\0"
       VALUE "OriginalFilename",	"zlib.dll\0"
       VALUE "ProductName",	"ZLib.DLL\0"

contrib/vstudio/vc7/zlibstat.vcproj

@@ -20,6 +20,7 @@
 			<Tool
 				Name="VCCLCompilerTool"
 				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
 				PreprocessorDefinitions="WIN32;ZLIB_WINAPI"
 				ExceptionHandling="FALSE"
 				RuntimeLibrary="5"
@@ -61,6 +62,7 @@
 			<Tool
 				Name="VCCLCompilerTool"
 				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
 				PreprocessorDefinitions="WIN32;ZLIB_WINAPI"
 				StringPooling="TRUE"
 				ExceptionHandling="FALSE"
@@ -102,6 +104,7 @@
 			<Tool
 				Name="VCCLCompilerTool"
 				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
 				PreprocessorDefinitions="WIN32;ZLIB_WINAPI;ASMV;ASMINF"
 				StringPooling="TRUE"
 				ExceptionHandling="FALSE"
@@ -117,7 +120,7 @@
 				Name="VCCustomBuildTool"/>
 			<Tool
 				Name="VCLibrarianTool"
-				AdditionalOptions="gvmat32.obj inffas32.obj /NODEFAULTLIB "
+				AdditionalOptions="..\..\masmx86\gvmat32.obj ..\..\masmx86\inffas32.obj /NODEFAULTLIB "
 				OutputFile=".\zlibstat\zlibstat.lib"
 				SuppressStartupBanner="TRUE"/>
 			<Tool
@@ -144,6 +147,7 @@
 			<Tool
 				Name="VCCLCompilerTool"
 				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
 				PreprocessorDefinitions="WIN32;ZLIB_WINAPI"
 				StringPooling="TRUE"
 				ExceptionHandling="FALSE"
@@ -182,49 +186,49 @@
 			Name="Source Files"
 			Filter="">
 			<File
-				RelativePath=".\adler32.c">
+				RelativePath="..\..\..\adler32.c">
 			</File>
 			<File
-				RelativePath=".\compress.c">
+				RelativePath="..\..\..\compress.c">
 			</File>
 			<File
-				RelativePath=".\crc32.c">
+				RelativePath="..\..\..\crc32.c">
 			</File>
 			<File
-				RelativePath=".\deflate.c">
+				RelativePath="..\..\..\deflate.c">
 			</File>
 			<File
-				RelativePath=".\gvmat32c.c">
+				RelativePath="..\..\masmx86\gvmat32c.c">
 			</File>
 			<File
-				RelativePath=".\gzio.c">
+				RelativePath="..\..\..\gzio.c">
 			</File>
 			<File
-				RelativePath=".\infback.c">
+				RelativePath="..\..\..\infback.c">
 			</File>
 			<File
-				RelativePath=".\inffast.c">
+				RelativePath="..\..\..\inffast.c">
 			</File>
 			<File
-				RelativePath=".\inflate.c">
+				RelativePath="..\..\..\inflate.c">
 			</File>
 			<File
-				RelativePath=".\inftrees.c">
+				RelativePath="..\..\..\inftrees.c">
 			</File>
 			<File
-				RelativePath=".\ioapi.c">
+				RelativePath="..\..\minizip\ioapi.c">
 			</File>
 			<File
-				RelativePath=".\trees.c">
+				RelativePath="..\..\..\trees.c">
 			</File>
 			<File
-				RelativePath=".\uncompr.c">
+				RelativePath="..\..\..\uncompr.c">
 			</File>
 			<File
-				RelativePath=".\unzip.c">
+				RelativePath="..\..\minizip\unzip.c">
 			</File>
 			<File
-				RelativePath=".\zip.c">
+				RelativePath="..\..\minizip\zip.c">
 			</File>
 			<File
 				RelativePath=".\zlib.rc">
@@ -233,7 +237,7 @@
 				RelativePath=".\zlibvc.def">
 			</File>
 			<File
-				RelativePath=".\zutil.c">
+				RelativePath="..\..\..\zutil.c">
 			</File>
 		</Filter>
 	</Files>

contrib/vstudio/vc7/zlibvc.def

@@ -1,5 +1,5 @@
 
-VERSION		1.21
+VERSION		1.23
 
 HEAPSIZE	1048576,8192
 

contrib/vstudio/vc7/zlibvc.sln

@@ -7,6 +7,8 @@ Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "minizip", "minizip.vcproj",
 EndProject
 Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "miniunz", "miniunz.vcproj", "{C52F9E7B-498A-42BE-8DB4-85A15694382A}"
 EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testZlibDll", "testzlib.vcproj", "{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}"
+EndProject
 Global
 	GlobalSection(SolutionConfiguration) = preSolution
 		ConfigName.0 = Debug
@@ -58,6 +60,16 @@ Global
 		{C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutAsm.Build.0 = Release|Win32
 		{C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutCrtdll.ActiveCfg = Release|Win32
 		{C52F9E7B-498A-42BE-8DB4-85A15694382A}.ReleaseWithoutCrtdll.Build.0 = Release|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.Debug.ActiveCfg = Debug|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.Debug.Build.0 = Debug|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.Release.ActiveCfg = Release|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.Release.Build.0 = Release|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.ReleaseAxp.ActiveCfg = Release|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.ReleaseAxp.Build.0 = Release|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.ReleaseWithoutAsm.ActiveCfg = Release|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.ReleaseWithoutAsm.Build.0 = Release|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.ReleaseWithoutCrtdll.ActiveCfg = Release|Win32
+		{AA6666AA-E09F-4135-9C0C-4FE50C3C654C}.ReleaseWithoutCrtdll.Build.0 = Release|Win32
 	EndGlobalSection
 	GlobalSection(ExtensibilityGlobals) = postSolution
 	EndGlobalSection

contrib/vstudio/vc7/zlibvc.vcproj

@@ -20,6 +20,7 @@
 			<Tool
 				Name="VCCLCompilerTool"
 				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
 				PreprocessorDefinitions="WIN32,ZLIB_WINAPI,ASMV,ASMINF"
 				ExceptionHandling="FALSE"
 				RuntimeLibrary="1"
@@ -35,7 +36,7 @@
 			<Tool
 				Name="VCLinkerTool"
 				AdditionalOptions="/MACHINE:I386"
-				AdditionalDependencies="gvmat32.obj inffas32.obj"
+				AdditionalDependencies="..\..\masmx86\gvmat32.obj ..\..\masmx86\inffas32.obj"
 				OutputFile=".\DebugDll\zlibwapi.dll"
 				LinkIncremental="2"
 				SuppressStartupBanner="TRUE"
@@ -72,10 +73,12 @@
 			IntermediateDirectory=".\zlibDllWithoutAsm"
 			ConfigurationType="2"
 			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="FALSE">
+			ATLMinimizesCRunTimeLibraryUsage="FALSE"
+			WholeProgramOptimization="TRUE">
 			<Tool
 				Name="VCCLCompilerTool"
 				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
 				PreprocessorDefinitions="WIN32,ZLIB_WINAPI"
 				StringPooling="TRUE"
 				ExceptionHandling="FALSE"
@@ -134,10 +137,12 @@
 			IntermediateDirectory=".\zlibDllWithoutCrtDll"
 			ConfigurationType="2"
 			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="FALSE">
+			ATLMinimizesCRunTimeLibraryUsage="FALSE"
+			WholeProgramOptimization="TRUE">
 			<Tool
 				Name="VCCLCompilerTool"
 				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
 				PreprocessorDefinitions="WIN32,ZLIB_WINAPI,ASMV,ASMINF"
 				StringPooling="TRUE"
 				ExceptionHandling="FALSE"
@@ -156,7 +161,7 @@
 			<Tool
 				Name="VCLinkerTool"
 				AdditionalOptions="/MACHINE:I386"
-				AdditionalDependencies="gvmat32.obj inffas32.obj "
+				AdditionalDependencies="..\..\masmx86\gvmat32.obj ..\..\masmx86\inffas32.obj "
 				OutputFile=".\zlibDllWithoutCrtDll\zlibwapi.dll"
 				LinkIncremental="1"
 				SuppressStartupBanner="TRUE"
@@ -196,10 +201,12 @@
 			IntermediateDirectory=".\zlibvc__"
 			ConfigurationType="2"
 			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="FALSE">
+			ATLMinimizesCRunTimeLibraryUsage="FALSE"
+			WholeProgramOptimization="TRUE">
 			<Tool
 				Name="VCCLCompilerTool"
 				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
 				PreprocessorDefinitions="WIN32,ZLIB_WINAPI"
 				StringPooling="TRUE"
 				ExceptionHandling="FALSE"
@@ -256,10 +263,12 @@
 			IntermediateDirectory=".\ReleaseDll"
 			ConfigurationType="2"
 			UseOfMFC="0"
-			ATLMinimizesCRunTimeLibraryUsage="FALSE">
+			ATLMinimizesCRunTimeLibraryUsage="FALSE"
+			WholeProgramOptimization="TRUE">
 			<Tool
 				Name="VCCLCompilerTool"
 				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
 				PreprocessorDefinitions="WIN32,ZLIB_WINAPI,ASMV,ASMINF"
 				StringPooling="TRUE"
 				ExceptionHandling="FALSE"
@@ -278,7 +287,7 @@
 			<Tool
 				Name="VCLinkerTool"
 				AdditionalOptions="/MACHINE:I386"
-				AdditionalDependencies="gvmat32.obj inffas32.obj crtdll.lib"
+				AdditionalDependencies="..\..\masmx86\gvmat32.obj ..\..\masmx86\inffas32.obj crtdll.lib"
 				OutputFile=".\ReleaseDll\zlibwapi.dll"
 				LinkIncremental="1"
 				SuppressStartupBanner="TRUE"
@@ -318,19 +327,19 @@
 			Name="Source Files"
 			Filter="cpp;c;cxx;rc;def;r;odl;hpj;bat;for;f90">
 			<File
-				RelativePath=".\adler32.c">
+				RelativePath="..\..\..\adler32.c">
 			</File>
 			<File
-				RelativePath=".\compress.c">
+				RelativePath="..\..\..\compress.c">
 			</File>
 			<File
-				RelativePath=".\crc32.c">
+				RelativePath="..\..\..\crc32.c">
 			</File>
 			<File
-				RelativePath=".\deflate.c">
+				RelativePath="..\..\..\deflate.c">
 			</File>
 			<File
-				RelativePath=".\gvmat32c.c">
+				RelativePath="..\..\masmx86\gvmat32c.c">
 				<FileConfiguration
 					Name="ReleaseWithoutAsm|Win32"
 					ExcludedFromBuild="TRUE">
@@ -339,34 +348,34 @@
 				</FileConfiguration>
 			</File>
 			<File
-				RelativePath=".\gzio.c">
+				RelativePath="..\..\..\gzio.c">
 			</File>
 			<File
-				RelativePath=".\infback.c">
+				RelativePath="..\..\..\infback.c">
 			</File>
 			<File
-				RelativePath=".\inffast.c">
+				RelativePath="..\..\..\inffast.c">
 			</File>
 			<File
-				RelativePath=".\inflate.c">
+				RelativePath="..\..\..\inflate.c">
 			</File>
 			<File
-				RelativePath=".\inftrees.c">
+				RelativePath="..\..\..\inftrees.c">
 			</File>
 			<File
-				RelativePath=".\ioapi.c">
+				RelativePath="..\..\minizip\ioapi.c">
 			</File>
 			<File
-				RelativePath=".\iowin32.c">
+				RelativePath="..\..\minizip\iowin32.c">
 			</File>
 			<File
-				RelativePath=".\trees.c">
+				RelativePath="..\..\..\trees.c">
 			</File>
 			<File
-				RelativePath=".\uncompr.c">
+				RelativePath="..\..\..\uncompr.c">
 			</File>
 			<File
-				RelativePath=".\unzip.c">
+				RelativePath="..\..\minizip\unzip.c">
 				<FileConfiguration
 					Name="Release|Win32">
 					<Tool
@@ -376,7 +385,7 @@
 				</FileConfiguration>
 			</File>
 			<File
-				RelativePath=".\zip.c">
+				RelativePath="..\..\minizip\zip.c">
 				<FileConfiguration
 					Name="Release|Win32">
 					<Tool
@@ -392,38 +401,38 @@
 				RelativePath=".\zlibvc.def">
 			</File>
 			<File
-				RelativePath=".\zutil.c">
+				RelativePath="..\..\..\zutil.c">
 			</File>
 		</Filter>
 		<Filter
 			Name="Header Files"
 			Filter="h;hpp;hxx;hm;inl;fi;fd">
 			<File
-				RelativePath=".\deflate.h">
+				RelativePath="..\..\..\deflate.h">
 			</File>
 			<File
-				RelativePath=".\infblock.h">
+				RelativePath="..\..\..\infblock.h">
 			</File>
 			<File
-				RelativePath=".\infcodes.h">
+				RelativePath="..\..\..\infcodes.h">
 			</File>
 			<File
-				RelativePath=".\inffast.h">
+				RelativePath="..\..\..\inffast.h">
 			</File>
 			<File
-				RelativePath=".\inftrees.h">
+				RelativePath="..\..\..\inftrees.h">
 			</File>
 			<File
-				RelativePath=".\infutil.h">
+				RelativePath="..\..\..\infutil.h">
 			</File>
 			<File
-				RelativePath=".\zconf.h">
+				RelativePath="..\..\..\zconf.h">
 			</File>
 			<File
-				RelativePath=".\zlib.h">
+				RelativePath="..\..\..\zlib.h">
 			</File>
 			<File
-				RelativePath=".\zutil.h">
+				RelativePath="..\..\..\zutil.h">
 			</File>
 		</Filter>
 		<Filter

contrib/vstudio/vc8/miniunz.vcproj

@@ -0,0 +1,566 @@
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+	ProjectType="Visual C++"
+	Version="8,00"
+	Name="miniunz"
+	ProjectGUID="{C52F9E7B-498A-42BE-8DB4-85A15694382A}"
+	Keyword="Win32Proj"
+	>
+	<Platforms>
+		<Platform
+			Name="Win32"
+		/>
+		<Platform
+			Name="x64"
+		/>
+		<Platform
+			Name="Itanium"
+		/>
+	</Platforms>
+	<ToolFiles>
+	</ToolFiles>
+	<Configurations>
+		<Configuration
+			Name="Debug|Win32"
+			OutputDirectory="x86\MiniUnzip$(ConfigurationName)"
+			IntermediateDirectory="x86\MiniUnzip$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE"
+				MinimalRebuild="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="1"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="4"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="x86\ZlibDllDebug\zlibwapi.lib"
+				OutputFile="$(OutDir)/miniunz.exe"
+				LinkIncremental="2"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				ProgramDatabaseFile="$(OutDir)/miniunz.pdb"
+				SubSystem="1"
+				TargetMachine="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Debug|x64"
+			OutputDirectory="x64\MiniUnzip$(ConfigurationName)"
+			IntermediateDirectory="x64\MiniUnzip$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="3"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64"
+				MinimalRebuild="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="3"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="x64\ZlibDllDebug\zlibwapi.lib"
+				OutputFile="$(OutDir)/miniunz.exe"
+				LinkIncremental="2"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				ProgramDatabaseFile="$(OutDir)/miniunz.pdb"
+				SubSystem="1"
+				TargetMachine="17"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Debug|Itanium"
+			OutputDirectory="ia64\MiniUnzip$(ConfigurationName)"
+			IntermediateDirectory="ia64\MiniUnzip$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="2"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64"
+				MinimalRebuild="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="3"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="ia64\ZlibDllDebug\zlibwapi.lib"
+				OutputFile="$(OutDir)/miniunz.exe"
+				LinkIncremental="2"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				ProgramDatabaseFile="$(OutDir)/miniunz.pdb"
+				SubSystem="1"
+				TargetMachine="5"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|Win32"
+			OutputDirectory="x86\MiniUnzip$(ConfigurationName)"
+			IntermediateDirectory="x86\MiniUnzip$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				OmitFramePointers="true"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE"
+				StringPooling="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="false"
+				EnableFunctionLevelLinking="true"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="x86\ZlibDllRelease\zlibwapi.lib"
+				OutputFile="$(OutDir)/miniunz.exe"
+				LinkIncremental="1"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|x64"
+			OutputDirectory="x64\MiniUnzip$(ConfigurationName)"
+			IntermediateDirectory="x64\MiniUnzip$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="3"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				OmitFramePointers="true"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64"
+				StringPooling="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="2"
+				BufferSecurityCheck="false"
+				EnableFunctionLevelLinking="true"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="x64\ZlibDllRelease\zlibwapi.lib"
+				OutputFile="$(OutDir)/miniunz.exe"
+				LinkIncremental="1"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="17"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|Itanium"
+			OutputDirectory="ia64\MiniUnzip$(ConfigurationName)"
+			IntermediateDirectory="ia64\MiniUnzip$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="2"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				OmitFramePointers="true"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64"
+				StringPooling="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="2"
+				BufferSecurityCheck="false"
+				EnableFunctionLevelLinking="true"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="ia64\ZlibDllRelease\zlibwapi.lib"
+				OutputFile="$(OutDir)/miniunz.exe"
+				LinkIncremental="1"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="5"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+	</Configurations>
+	<References>
+	</References>
+	<Files>
+		<Filter
+			Name="Source Files"
+			Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm"
+			>
+			<File
+				RelativePath="..\..\minizip\miniunz.c"
+				>
+			</File>
+		</Filter>
+		<Filter
+			Name="Header Files"
+			Filter="h;hpp;hxx;hm;inl;inc"
+			>
+		</Filter>
+		<Filter
+			Name="Resource Files"
+			Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+			>
+		</Filter>
+	</Files>
+	<Globals>
+	</Globals>
+</VisualStudioProject>

contrib/vstudio/vc8/minizip.vcproj

@@ -0,0 +1,563 @@
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+	ProjectType="Visual C++"
+	Version="8,00"
+	Name="minizip"
+	ProjectGUID="{48CDD9DC-E09F-4135-9C0C-4FE50C3C654B}"
+	Keyword="Win32Proj"
+	>
+	<Platforms>
+		<Platform
+			Name="Win32"
+		/>
+		<Platform
+			Name="x64"
+		/>
+		<Platform
+			Name="Itanium"
+		/>
+	</Platforms>
+	<ToolFiles>
+	</ToolFiles>
+	<Configurations>
+		<Configuration
+			Name="Debug|Win32"
+			OutputDirectory="x86\MiniZip$(ConfigurationName)"
+			IntermediateDirectory="x86\MiniZip$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE"
+				MinimalRebuild="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="1"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="4"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="x86\ZlibDllDebug\zlibwapi.lib"
+				OutputFile="$(OutDir)/minizip.exe"
+				LinkIncremental="2"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				ProgramDatabaseFile="$(OutDir)/minizip.pdb"
+				SubSystem="1"
+				TargetMachine="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Debug|x64"
+			OutputDirectory="x64\$(ConfigurationName)"
+			IntermediateDirectory="x64\$(ConfigurationName)"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="3"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64"
+				MinimalRebuild="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="3"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="x64\ZlibDllDebug\zlibwapi.lib"
+				OutputFile="$(OutDir)/minizip.exe"
+				LinkIncremental="2"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				ProgramDatabaseFile="$(OutDir)/minizip.pdb"
+				SubSystem="1"
+				TargetMachine="17"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Debug|Itanium"
+			OutputDirectory="ia64\$(ConfigurationName)"
+			IntermediateDirectory="ia64\$(ConfigurationName)"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="2"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64"
+				MinimalRebuild="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="3"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="ia64\ZlibDllDebug\zlibwapi.lib"
+				OutputFile="$(OutDir)/minizip.exe"
+				LinkIncremental="2"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				ProgramDatabaseFile="$(OutDir)/minizip.pdb"
+				SubSystem="1"
+				TargetMachine="5"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|Win32"
+			OutputDirectory="x86\MiniZip$(ConfigurationName)"
+			IntermediateDirectory="x86\MiniZip$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				OmitFramePointers="true"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE"
+				StringPooling="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="false"
+				EnableFunctionLevelLinking="true"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="x86\ZlibDllRelease\zlibwapi.lib"
+				OutputFile="$(OutDir)/minizip.exe"
+				LinkIncremental="1"
+				GenerateDebugInformation="true"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|x64"
+			OutputDirectory="x64\$(ConfigurationName)"
+			IntermediateDirectory="x64\$(ConfigurationName)"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="3"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				OmitFramePointers="true"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64"
+				StringPooling="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="2"
+				BufferSecurityCheck="false"
+				EnableFunctionLevelLinking="true"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="x64\ZlibDllRelease\zlibwapi.lib"
+				OutputFile="$(OutDir)/minizip.exe"
+				LinkIncremental="1"
+				GenerateDebugInformation="true"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="17"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|Itanium"
+			OutputDirectory="ia64\$(ConfigurationName)"
+			IntermediateDirectory="ia64\$(ConfigurationName)"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="2"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				OmitFramePointers="true"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64"
+				StringPooling="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="2"
+				BufferSecurityCheck="false"
+				EnableFunctionLevelLinking="true"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="ia64\ZlibDllRelease\zlibwapi.lib"
+				OutputFile="$(OutDir)/minizip.exe"
+				LinkIncremental="1"
+				GenerateDebugInformation="true"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="5"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+	</Configurations>
+	<References>
+	</References>
+	<Files>
+		<Filter
+			Name="Source Files"
+			Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm"
+			>
+			<File
+				RelativePath="..\..\minizip\minizip.c"
+				>
+			</File>
+		</Filter>
+		<Filter
+			Name="Header Files"
+			Filter="h;hpp;hxx;hm;inl;inc"
+			>
+		</Filter>
+		<Filter
+			Name="Resource Files"
+			Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+			>
+		</Filter>
+	</Files>
+	<Globals>
+	</Globals>
+</VisualStudioProject>

contrib/vstudio/vc8/testzlib.vcproj

@@ -0,0 +1,948 @@
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+	ProjectType="Visual C++"
+	Version="8,00"
+	Name="testzlib"
+	ProjectGUID="{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}"
+	RootNamespace="testzlib"
+	Keyword="Win32Proj"
+	>
+	<Platforms>
+		<Platform
+			Name="Win32"
+		/>
+		<Platform
+			Name="x64"
+		/>
+		<Platform
+			Name="Itanium"
+		/>
+	</Platforms>
+	<ToolFiles>
+	</ToolFiles>
+	<Configurations>
+		<Configuration
+			Name="Debug|Win32"
+			OutputDirectory="x86\TestZlib$(ConfigurationName)"
+			IntermediateDirectory="x86\TestZlib$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\.."
+				PreprocessorDefinitions="ASMV;ASMINF;WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE"
+				MinimalRebuild="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="1"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				AssemblerOutput="4"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="4"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="..\..\masmx86\gvmat32.obj ..\..\masmx86\inffas32.obj"
+				OutputFile="$(OutDir)/testzlib.exe"
+				LinkIncremental="2"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				ProgramDatabaseFile="$(OutDir)/testzlib.pdb"
+				SubSystem="1"
+				TargetMachine="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Debug|x64"
+			OutputDirectory="x64\TestZlib$(ConfigurationName)"
+			IntermediateDirectory="x64\TestZlib$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				AdditionalIncludeDirectories="..\..\.."
+				PreprocessorDefinitions="ASMV;ASMINF;WIN32;ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="3"
+				BufferSecurityCheck="false"
+				AssemblerListingLocation="$(IntDir)\"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="..\..\masmx64\gvmat64.obj ..\..\masmx64\inffasx64.obj"
+				GenerateManifest="false"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Debug|Itanium"
+			OutputDirectory="ia64\TestZlib$(ConfigurationName)"
+			IntermediateDirectory="ia64\TestZlib$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="2"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\.."
+				PreprocessorDefinitions="ZLIB_WINAPI;_DEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;WIN64"
+				MinimalRebuild="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="3"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				AssemblerOutput="4"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				OutputFile="$(OutDir)/testzlib.exe"
+				LinkIncremental="2"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				ProgramDatabaseFile="$(OutDir)/testzlib.pdb"
+				SubSystem="1"
+				TargetMachine="5"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="ReleaseWithoutAsm|Win32"
+			OutputDirectory="x86\TestZlib$(ConfigurationName)"
+			IntermediateDirectory="x86\TestZlib$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			CharacterSet="2"
+			WholeProgramOptimization="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				OmitFramePointers="true"
+				AdditionalIncludeDirectories="..\..\.."
+				PreprocessorDefinitions="WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE"
+				StringPooling="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="false"
+				EnableFunctionLevelLinking="true"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				OutputFile="$(OutDir)/testzlib.exe"
+				LinkIncremental="1"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="ReleaseWithoutAsm|x64"
+			OutputDirectory="x64\TestZlib$(ConfigurationName)"
+			IntermediateDirectory="x64\TestZlib$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			WholeProgramOptimization="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				AdditionalIncludeDirectories="..\..\.."
+				PreprocessorDefinitions="WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="2"
+				BufferSecurityCheck="false"
+				AssemblerListingLocation="$(IntDir)\"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies=""
+				GenerateManifest="false"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="ReleaseWithoutAsm|Itanium"
+			OutputDirectory="ia64\TestZlib$(ConfigurationName)"
+			IntermediateDirectory="ia64\TestZlib$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			CharacterSet="2"
+			WholeProgramOptimization="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="2"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				OmitFramePointers="true"
+				AdditionalIncludeDirectories="..\..\.."
+				PreprocessorDefinitions="ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;WIN64"
+				StringPooling="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="2"
+				BufferSecurityCheck="false"
+				EnableFunctionLevelLinking="true"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				OutputFile="$(OutDir)/testzlib.exe"
+				LinkIncremental="1"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="5"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|Win32"
+			OutputDirectory="x86\TestZlib$(ConfigurationName)"
+			IntermediateDirectory="x86\TestZlib$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			CharacterSet="2"
+			WholeProgramOptimization="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				OmitFramePointers="true"
+				AdditionalIncludeDirectories="..\..\.."
+				PreprocessorDefinitions="ASMV;ASMINF;WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE"
+				StringPooling="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="false"
+				EnableFunctionLevelLinking="true"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="..\..\masmx86\gvmat32.obj ..\..\masmx86\inffas32.obj"
+				OutputFile="$(OutDir)/testzlib.exe"
+				LinkIncremental="1"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|x64"
+			OutputDirectory="x64\TestZlib$(ConfigurationName)"
+			IntermediateDirectory="x64\TestZlib$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			WholeProgramOptimization="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				AdditionalIncludeDirectories="..\..\.."
+				PreprocessorDefinitions="ASMV;ASMINF;WIN32;ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="2"
+				BufferSecurityCheck="false"
+				AssemblerListingLocation="$(IntDir)\"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="..\..\masmx64\gvmat64.obj ..\..\masmx64\inffasx64.obj"
+				GenerateManifest="false"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|Itanium"
+			OutputDirectory="ia64\TestZlib$(ConfigurationName)"
+			IntermediateDirectory="ia64\TestZlib$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			CharacterSet="2"
+			WholeProgramOptimization="1"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="2"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				OmitFramePointers="true"
+				AdditionalIncludeDirectories="..\..\.."
+				PreprocessorDefinitions="ZLIB_WINAPI;NDEBUG;_CONSOLE;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;WIN64"
+				StringPooling="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="2"
+				BufferSecurityCheck="false"
+				EnableFunctionLevelLinking="true"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				OutputFile="$(OutDir)/testzlib.exe"
+				LinkIncremental="1"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="5"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+	</Configurations>
+	<References>
+	</References>
+	<Files>
+		<Filter
+			Name="Source Files"
+			Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm"
+			>
+			<File
+				RelativePath="..\..\..\adler32.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\compress.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\crc32.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\deflate.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\masmx86\gvmat32c.c"
+				>
+				<FileConfiguration
+					Name="Debug|x64"
+					ExcludedFromBuild="true"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="Debug|Itanium"
+					ExcludedFromBuild="true"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="ReleaseWithoutAsm|x64"
+					ExcludedFromBuild="true"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="ReleaseWithoutAsm|Itanium"
+					ExcludedFromBuild="true"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="Release|x64"
+					ExcludedFromBuild="true"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="Release|Itanium"
+					ExcludedFromBuild="true"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="Debug|Win64 (AMD64)"
+					ExcludedFromBuild="TRUE"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="Release|Win64 (AMD64)"
+					ExcludedFromBuild="TRUE"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="ReleaseAsm|Win64 (AMD64)"
+					ExcludedFromBuild="TRUE"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+			</File>
+			<File
+				RelativePath="..\..\..\infback.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\masmx64\inffas8664.c"
+				>
+				<FileConfiguration
+					Name="Debug|Win32"
+					ExcludedFromBuild="true"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="Debug|Itanium"
+					ExcludedFromBuild="true"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="ReleaseWithoutAsm|Win32"
+					ExcludedFromBuild="true"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="ReleaseWithoutAsm|Itanium"
+					ExcludedFromBuild="true"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="Release|Win32"
+					ExcludedFromBuild="true"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="Release|Itanium"
+					ExcludedFromBuild="true"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+			</File>
+			<File
+				RelativePath="..\..\..\inffast.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\inflate.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\inftrees.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\testzlib\testzlib.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\trees.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\uncompr.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\zutil.c"
+				>
+			</File>
+		</Filter>
+		<Filter
+			Name="Header Files"
+			Filter="h;hpp;hxx;hm;inl;inc"
+			>
+		</Filter>
+		<Filter
+			Name="Resource Files"
+			Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+			>
+		</Filter>
+	</Files>
+	<Globals>
+	</Globals>
+</VisualStudioProject>

contrib/vstudio/vc8/testzlibdll.vcproj

@@ -0,0 +1,567 @@
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+	ProjectType="Visual C++"
+	Version="8,00"
+	Name="TestZlibDll"
+	ProjectGUID="{C52F9E7B-498A-42BE-8DB4-85A15694366A}"
+	Keyword="Win32Proj"
+	SignManifests="true"
+	>
+	<Platforms>
+		<Platform
+			Name="Win32"
+		/>
+		<Platform
+			Name="x64"
+		/>
+		<Platform
+			Name="Itanium"
+		/>
+	</Platforms>
+	<ToolFiles>
+	</ToolFiles>
+	<Configurations>
+		<Configuration
+			Name="Debug|Win32"
+			OutputDirectory="x86\TestZlibDll$(ConfigurationName)"
+			IntermediateDirectory="x86\TestZlibDll$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE"
+				MinimalRebuild="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="1"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="4"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="x86\ZlibDllDebug\zlibwapi.lib"
+				OutputFile="$(OutDir)/testzlib.exe"
+				LinkIncremental="2"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				ProgramDatabaseFile="$(OutDir)/testzlib.pdb"
+				SubSystem="1"
+				TargetMachine="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Debug|x64"
+			OutputDirectory="x64\TestZlibDll$(ConfigurationName)"
+			IntermediateDirectory="x64\TestZlibDll$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="3"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64"
+				MinimalRebuild="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="3"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="x64\ZlibDllDebug\zlibwapi.lib"
+				OutputFile="$(OutDir)/testzlib.exe"
+				LinkIncremental="2"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				ProgramDatabaseFile="$(OutDir)/testzlib.pdb"
+				SubSystem="1"
+				TargetMachine="17"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Debug|Itanium"
+			OutputDirectory="ia64\TestZlibDll$(ConfigurationName)"
+			IntermediateDirectory="ia64\TestZlibDll$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="2"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;_DEBUG;_CONSOLE;WIN64"
+				MinimalRebuild="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="3"
+				BufferSecurityCheck="false"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="ia64\ZlibDllDebug\zlibwapi.lib"
+				OutputFile="$(OutDir)/testzlib.exe"
+				LinkIncremental="2"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				ProgramDatabaseFile="$(OutDir)/testzlib.pdb"
+				SubSystem="1"
+				TargetMachine="5"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|Win32"
+			OutputDirectory="x86\TestZlibDll$(ConfigurationName)"
+			IntermediateDirectory="x86\TestZlibDll$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				OmitFramePointers="true"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="WIN32;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE"
+				StringPooling="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="false"
+				EnableFunctionLevelLinking="true"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="x86\ZlibDllRelease\zlibwapi.lib"
+				OutputFile="$(OutDir)/testzlib.exe"
+				LinkIncremental="1"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="1"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|x64"
+			OutputDirectory="x64\TestZlibDll$(ConfigurationName)"
+			IntermediateDirectory="x64\TestZlibDll$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="3"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				OmitFramePointers="true"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64"
+				StringPooling="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="2"
+				BufferSecurityCheck="false"
+				EnableFunctionLevelLinking="true"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="x64\ZlibDllRelease\zlibwapi.lib"
+				OutputFile="$(OutDir)/testzlib.exe"
+				LinkIncremental="1"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="17"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|Itanium"
+			OutputDirectory="ia64\TestZlibDll$(ConfigurationName)"
+			IntermediateDirectory="ia64\TestZlibDll$(ConfigurationName)\Tmp"
+			ConfigurationType="1"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			CharacterSet="2"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="2"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="2"
+				InlineFunctionExpansion="1"
+				OmitFramePointers="true"
+				AdditionalIncludeDirectories="..\..\..;..\..\minizip"
+				PreprocessorDefinitions="_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ZLIB_WINAPI;NDEBUG;_CONSOLE;WIN64"
+				StringPooling="true"
+				BasicRuntimeChecks="0"
+				RuntimeLibrary="2"
+				BufferSecurityCheck="false"
+				EnableFunctionLevelLinking="true"
+				UsePrecompiledHeader="0"
+				AssemblerListingLocation="$(IntDir)\"
+				WarningLevel="3"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="3"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLinkerTool"
+				AdditionalDependencies="ia64\ZlibDllRelease\zlibwapi.lib"
+				OutputFile="$(OutDir)/testzlib.exe"
+				LinkIncremental="1"
+				GenerateManifest="false"
+				GenerateDebugInformation="true"
+				SubSystem="1"
+				OptimizeReferences="2"
+				EnableCOMDATFolding="2"
+				OptimizeForWindows98="1"
+				TargetMachine="5"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCManifestTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCAppVerifierTool"
+			/>
+			<Tool
+				Name="VCWebDeploymentTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+	</Configurations>
+	<References>
+	</References>
+	<Files>
+		<Filter
+			Name="Source Files"
+			Filter="cpp;c;cxx;def;odl;idl;hpj;bat;asm"
+			>
+			<File
+				RelativePath="..\..\testzlib\testzlib.c"
+				>
+			</File>
+		</Filter>
+		<Filter
+			Name="Header Files"
+			Filter="h;hpp;hxx;hm;inl;inc"
+			>
+		</Filter>
+		<Filter
+			Name="Resource Files"
+			Filter="rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe"
+			>
+		</Filter>
+	</Files>
+	<Globals>
+	</Globals>
+</VisualStudioProject>

contrib/vstudio/vc8/zlib.rc

@@ -0,0 +1,32 @@
+#include <windows.h>
+
+#define IDR_VERSION1  1
+IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
+  FILEVERSION	 1,2,3,0
+  PRODUCTVERSION 1,2,3,0
+  FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
+  FILEFLAGS	0
+  FILEOS	VOS_DOS_WINDOWS32
+  FILETYPE	VFT_DLL
+  FILESUBTYPE	0	// not used
+BEGIN
+  BLOCK "StringFileInfo"
+  BEGIN
+    BLOCK "040904E4"
+    //language ID = U.S. English, char set = Windows, Multilingual
+
+    BEGIN
+      VALUE "FileDescription", "zlib data compression library\0"
+      VALUE "FileVersion",	"1.2.3.0\0"
+      VALUE "InternalName",	"zlib\0"
+      VALUE "OriginalFilename",	"zlib.dll\0"
+      VALUE "ProductName",	"ZLib.DLL\0"
+      VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
+      VALUE "LegalCopyright", "(C) 1995-2003 Jean-loup Gailly & Mark Adler\0"
+    END
+  END
+  BLOCK "VarFileInfo"
+  BEGIN
+    VALUE "Translation", 0x0409, 1252
+  END
+END

contrib/vstudio/vc8/zlibstat.vcproj

@@ -0,0 +1,870 @@
+<?xml version="1.0" encoding="Windows-1252"?>
+<VisualStudioProject
+	ProjectType="Visual C++"
+	Version="8,00"
+	Name="zlibstat"
+	ProjectGUID="{745DEC58-EBB3-47A9-A9B8-4C6627C01BF8}"
+	>
+	<Platforms>
+		<Platform
+			Name="Win32"
+		/>
+		<Platform
+			Name="x64"
+		/>
+		<Platform
+			Name="Itanium"
+		/>
+	</Platforms>
+	<ToolFiles>
+	</ToolFiles>
+	<Configurations>
+		<Configuration
+			Name="Debug|Win32"
+			OutputDirectory="x86\ZlibStat$(ConfigurationName)"
+			IntermediateDirectory="x86\ZlibStat$(ConfigurationName)\Tmp"
+			ConfigurationType="4"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			UseOfMFC="0"
+			ATLMinimizesCRunTimeLibraryUsage="false"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+				PreprocessorDefinitions="WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE"
+				ExceptionHandling="0"
+				RuntimeLibrary="1"
+				BufferSecurityCheck="false"
+				PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+				AssemblerListingLocation="$(IntDir)\"
+				ObjectFile="$(IntDir)\"
+				ProgramDataBaseFileName="$(OutDir)\"
+				WarningLevel="3"
+				SuppressStartupBanner="true"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="1"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+				Culture="1036"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLibrarianTool"
+				AdditionalOptions="/MACHINE:X86 /NODEFAULTLIB"
+				OutputFile="$(OutDir)\zlibstat.lib"
+				SuppressStartupBanner="true"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Debug|x64"
+			OutputDirectory="x64\ZlibStat$(ConfigurationName)"
+			IntermediateDirectory="x64\ZlibStat$(ConfigurationName)\Tmp"
+			ConfigurationType="4"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			UseOfMFC="0"
+			ATLMinimizesCRunTimeLibraryUsage="false"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="3"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+				PreprocessorDefinitions="ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;WIN64"
+				ExceptionHandling="0"
+				RuntimeLibrary="3"
+				BufferSecurityCheck="false"
+				PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+				AssemblerListingLocation="$(IntDir)\"
+				ObjectFile="$(IntDir)\"
+				ProgramDataBaseFileName="$(OutDir)\"
+				WarningLevel="3"
+				SuppressStartupBanner="true"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="1"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+				Culture="1036"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLibrarianTool"
+				AdditionalOptions="/MACHINE:AMD64 /NODEFAULTLIB"
+				OutputFile="$(OutDir)\zlibstat.lib"
+				SuppressStartupBanner="true"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Debug|Itanium"
+			OutputDirectory="ia64\ZlibStat$(ConfigurationName)"
+			IntermediateDirectory="ia64\ZlibStat$(ConfigurationName)\Tmp"
+			ConfigurationType="4"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			UseOfMFC="0"
+			ATLMinimizesCRunTimeLibraryUsage="false"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="2"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				Optimization="0"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+				PreprocessorDefinitions="ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;WIN64"
+				ExceptionHandling="0"
+				RuntimeLibrary="3"
+				BufferSecurityCheck="false"
+				PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+				AssemblerListingLocation="$(IntDir)\"
+				ObjectFile="$(IntDir)\"
+				ProgramDataBaseFileName="$(OutDir)\"
+				WarningLevel="3"
+				SuppressStartupBanner="true"
+				Detect64BitPortabilityProblems="true"
+				DebugInformationFormat="1"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+				Culture="1036"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLibrarianTool"
+				AdditionalOptions="/MACHINE:IA64 /NODEFAULTLIB"
+				OutputFile="$(OutDir)\zlibstat.lib"
+				SuppressStartupBanner="true"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|Win32"
+			OutputDirectory="x86\ZlibStat$(ConfigurationName)"
+			IntermediateDirectory="x86\ZlibStat$(ConfigurationName)\Tmp"
+			ConfigurationType="4"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			UseOfMFC="0"
+			ATLMinimizesCRunTimeLibraryUsage="false"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+				PreprocessorDefinitions="WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ASMV;ASMINF"
+				StringPooling="true"
+				ExceptionHandling="0"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="false"
+				EnableFunctionLevelLinking="true"
+				PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+				AssemblerListingLocation="$(IntDir)\"
+				ObjectFile="$(IntDir)\"
+				ProgramDataBaseFileName="$(OutDir)\"
+				WarningLevel="3"
+				SuppressStartupBanner="true"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+				Culture="1036"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLibrarianTool"
+				AdditionalOptions="/MACHINE:X86 /NODEFAULTLIB"
+				AdditionalDependencies="..\..\masmx86\gvmat32.obj ..\..\masmx86\inffas32.obj "
+				OutputFile="$(OutDir)\zlibstat.lib"
+				SuppressStartupBanner="true"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|x64"
+			OutputDirectory="x64\ZlibStat$(ConfigurationName)"
+			IntermediateDirectory="x64\ZlibStat$(ConfigurationName)\Tmp"
+			ConfigurationType="4"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			UseOfMFC="0"
+			ATLMinimizesCRunTimeLibraryUsage="false"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="3"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+				PreprocessorDefinitions="ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;ASMV;ASMINF;WIN64"
+				StringPooling="true"
+				ExceptionHandling="0"
+				RuntimeLibrary="2"
+				BufferSecurityCheck="false"
+				EnableFunctionLevelLinking="true"
+				PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+				AssemblerListingLocation="$(IntDir)\"
+				ObjectFile="$(IntDir)\"
+				ProgramDataBaseFileName="$(OutDir)\"
+				WarningLevel="3"
+				SuppressStartupBanner="true"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+				Culture="1036"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLibrarianTool"
+				AdditionalOptions="/MACHINE:AMD64 /NODEFAULTLIB"
+				AdditionalDependencies="..\..\masmx64\gvmat64.obj ..\..\masmx64\inffasx64.obj "
+				OutputFile="$(OutDir)\zlibstat.lib"
+				SuppressStartupBanner="true"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="Release|Itanium"
+			OutputDirectory="ia64\ZlibStat$(ConfigurationName)"
+			IntermediateDirectory="ia64\ZlibStat$(ConfigurationName)\Tmp"
+			ConfigurationType="4"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			UseOfMFC="0"
+			ATLMinimizesCRunTimeLibraryUsage="false"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="2"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+				PreprocessorDefinitions="ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;WIN64"
+				StringPooling="true"
+				ExceptionHandling="0"
+				RuntimeLibrary="2"
+				BufferSecurityCheck="false"
+				EnableFunctionLevelLinking="true"
+				PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+				AssemblerListingLocation="$(IntDir)\"
+				ObjectFile="$(IntDir)\"
+				ProgramDataBaseFileName="$(OutDir)\"
+				WarningLevel="3"
+				SuppressStartupBanner="true"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+				Culture="1036"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLibrarianTool"
+				AdditionalOptions="/MACHINE:IA64 /NODEFAULTLIB"
+				OutputFile="$(OutDir)\zlibstat.lib"
+				SuppressStartupBanner="true"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="ReleaseWithoutAsm|Win32"
+			OutputDirectory="x86\ZlibStat$(ConfigurationName)"
+			IntermediateDirectory="x86\ZlibStat$(ConfigurationName)\Tmp"
+			ConfigurationType="4"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			UseOfMFC="0"
+			ATLMinimizesCRunTimeLibraryUsage="false"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+				PreprocessorDefinitions="WIN32;ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE"
+				StringPooling="true"
+				ExceptionHandling="0"
+				RuntimeLibrary="0"
+				BufferSecurityCheck="false"
+				EnableFunctionLevelLinking="true"
+				PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+				AssemblerListingLocation="$(IntDir)\"
+				ObjectFile="$(IntDir)\"
+				ProgramDataBaseFileName="$(OutDir)\"
+				WarningLevel="3"
+				SuppressStartupBanner="true"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+				Culture="1036"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLibrarianTool"
+				AdditionalOptions="/MACHINE:X86 /NODEFAULTLIB"
+				OutputFile="$(OutDir)\zlibstat.lib"
+				SuppressStartupBanner="true"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="ReleaseWithoutAsm|x64"
+			OutputDirectory="x64\ZlibStat$(ConfigurationName)"
+			IntermediateDirectory="x64\ZlibStat$(ConfigurationName)\Tmp"
+			ConfigurationType="4"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			UseOfMFC="0"
+			ATLMinimizesCRunTimeLibraryUsage="false"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="3"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+				PreprocessorDefinitions="ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;WIN64"
+				StringPooling="true"
+				ExceptionHandling="0"
+				RuntimeLibrary="2"
+				BufferSecurityCheck="false"
+				EnableFunctionLevelLinking="true"
+				PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+				AssemblerListingLocation="$(IntDir)\"
+				ObjectFile="$(IntDir)\"
+				ProgramDataBaseFileName="$(OutDir)\"
+				WarningLevel="3"
+				SuppressStartupBanner="true"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+				Culture="1036"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLibrarianTool"
+				AdditionalOptions="/MACHINE:AMD64 /NODEFAULTLIB"
+				OutputFile="$(OutDir)\zlibstat.lib"
+				SuppressStartupBanner="true"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+		<Configuration
+			Name="ReleaseWithoutAsm|Itanium"
+			OutputDirectory="ia64\ZlibStat$(ConfigurationName)"
+			IntermediateDirectory="ia64\ZlibStat$(ConfigurationName)\Tmp"
+			ConfigurationType="4"
+			InheritedPropertySheets="UpgradeFromVC70.vsprops"
+			UseOfMFC="0"
+			ATLMinimizesCRunTimeLibraryUsage="false"
+			>
+			<Tool
+				Name="VCPreBuildEventTool"
+			/>
+			<Tool
+				Name="VCCustomBuildTool"
+			/>
+			<Tool
+				Name="VCXMLDataGeneratorTool"
+			/>
+			<Tool
+				Name="VCWebServiceProxyGeneratorTool"
+			/>
+			<Tool
+				Name="VCMIDLTool"
+				TargetEnvironment="2"
+			/>
+			<Tool
+				Name="VCCLCompilerTool"
+				InlineFunctionExpansion="1"
+				AdditionalIncludeDirectories="..\..\..;..\..\masmx86"
+				PreprocessorDefinitions="ZLIB_WINAPI;_CRT_NONSTDC_NO_DEPRECATE;_CRT_SECURE_NO_DEPRECATE;WIN64"
+				StringPooling="true"
+				ExceptionHandling="0"
+				RuntimeLibrary="2"
+				BufferSecurityCheck="false"
+				EnableFunctionLevelLinking="true"
+				PrecompiledHeaderFile="$(IntDir)/zlibstat.pch"
+				AssemblerListingLocation="$(IntDir)\"
+				ObjectFile="$(IntDir)\"
+				ProgramDataBaseFileName="$(OutDir)\"
+				WarningLevel="3"
+				SuppressStartupBanner="true"
+			/>
+			<Tool
+				Name="VCManagedResourceCompilerTool"
+			/>
+			<Tool
+				Name="VCResourceCompilerTool"
+				Culture="1036"
+			/>
+			<Tool
+				Name="VCPreLinkEventTool"
+			/>
+			<Tool
+				Name="VCLibrarianTool"
+				AdditionalOptions="/MACHINE:IA64 /NODEFAULTLIB"
+				OutputFile="$(OutDir)\zlibstat.lib"
+				SuppressStartupBanner="true"
+			/>
+			<Tool
+				Name="VCALinkTool"
+			/>
+			<Tool
+				Name="VCXDCMakeTool"
+			/>
+			<Tool
+				Name="VCBscMakeTool"
+			/>
+			<Tool
+				Name="VCFxCopTool"
+			/>
+			<Tool
+				Name="VCPostBuildEventTool"
+			/>
+		</Configuration>
+	</Configurations>
+	<References>
+	</References>
+	<Files>
+		<Filter
+			Name="Source Files"
+			>
+			<File
+				RelativePath="..\..\..\adler32.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\compress.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\crc32.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\deflate.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\masmx86\gvmat32c.c"
+				>
+				<FileConfiguration
+					Name="Debug|x64"
+					ExcludedFromBuild="true"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="Debug|Itanium"
+					ExcludedFromBuild="true"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="Release|x64"
+					ExcludedFromBuild="true"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="Release|Itanium"
+					ExcludedFromBuild="true"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="ReleaseWithoutAsm|x64"
+					ExcludedFromBuild="true"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="ReleaseWithoutAsm|Itanium"
+					ExcludedFromBuild="true"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+			</File>
+			<File
+				RelativePath="..\..\..\gzio.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\infback.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\masmx64\inffas8664.c"
+				>
+				<FileConfiguration
+					Name="Debug|Win32"
+					ExcludedFromBuild="true"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="Debug|Itanium"
+					ExcludedFromBuild="true"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="Release|Win32"
+					ExcludedFromBuild="true"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="Release|Itanium"
+					ExcludedFromBuild="true"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="ReleaseWithoutAsm|Win32"
+					ExcludedFromBuild="true"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+				<FileConfiguration
+					Name="ReleaseWithoutAsm|Itanium"
+					ExcludedFromBuild="true"
+					>
+					<Tool
+						Name="VCCLCompilerTool"
+					/>
+				</FileConfiguration>
+			</File>
+			<File
+				RelativePath="..\..\..\inffast.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\inflate.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\inftrees.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\minizip\ioapi.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\trees.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\uncompr.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\minizip\unzip.c"
+				>
+			</File>
+			<File
+				RelativePath="..\..\minizip\zip.c"
+				>
+			</File>
+			<File
+				RelativePath=".\zlib.rc"
+				>
+			</File>
+			<File
+				RelativePath=".\zlibvc.def"
+				>
+			</File>
+			<File
+				RelativePath="..\..\..\zutil.c"
+				>
+			</File>
+		</Filter>
+	</Files>
+	<Globals>
+	</Globals>
+</VisualStudioProject>

contrib/vstudio/vc8/zlibvc.def

@@ -0,0 +1,92 @@
+
+VERSION		1.23
+
+HEAPSIZE	1048576,8192
+
+EXPORTS
+        adler32                                  @1
+        compress                                 @2
+        crc32                                    @3
+        deflate                                  @4
+        deflateCopy                              @5
+        deflateEnd                               @6
+        deflateInit2_                            @7
+        deflateInit_                             @8
+        deflateParams                            @9
+        deflateReset                             @10
+        deflateSetDictionary                     @11
+        gzclose                                  @12
+        gzdopen                                  @13
+        gzerror                                  @14
+        gzflush                                  @15
+        gzopen                                   @16
+        gzread                                   @17
+        gzwrite                                  @18
+        inflate                                  @19
+        inflateEnd                               @20
+        inflateInit2_                            @21
+        inflateInit_                             @22
+        inflateReset                             @23
+        inflateSetDictionary                     @24
+        inflateSync                              @25
+        uncompress                               @26
+        zlibVersion                              @27
+        gzprintf                                 @28
+        gzputc                                   @29
+        gzgetc                                   @30
+        gzseek                                   @31
+        gzrewind                                 @32
+        gztell                                   @33
+        gzeof                                    @34
+        gzsetparams                              @35
+        zError                                   @36
+        inflateSyncPoint                         @37
+        get_crc_table                            @38
+        compress2                                @39
+        gzputs                                   @40
+        gzgets                                   @41
+        inflateCopy                              @42
+        inflateBackInit_                         @43
+        inflateBack                              @44
+        inflateBackEnd                           @45
+        compressBound                            @46
+        deflateBound                             @47
+        gzclearerr                               @48
+        gzungetc                                 @49
+        zlibCompileFlags                         @50
+        deflatePrime                             @51
+
+        unzOpen                                  @61
+        unzClose                                 @62
+        unzGetGlobalInfo                         @63
+        unzGetCurrentFileInfo                    @64
+        unzGoToFirstFile                         @65
+        unzGoToNextFile                          @66
+        unzOpenCurrentFile                       @67
+        unzReadCurrentFile                       @68
+        unzOpenCurrentFile3                      @69
+        unztell                                  @70
+        unzeof                                   @71
+        unzCloseCurrentFile                      @72
+        unzGetGlobalComment                      @73
+        unzStringFileNameCompare                 @74
+        unzLocateFile                            @75
+        unzGetLocalExtrafield                    @76
+        unzOpen2                                 @77
+        unzOpenCurrentFile2                      @78
+        unzOpenCurrentFilePassword               @79
+
+        zipOpen                                  @80
+        zipOpenNewFileInZip                      @81
+        zipWriteInFileInZip                      @82
+        zipCloseFileInZip                        @83
+        zipClose                                 @84
+        zipOpenNewFileInZip2                     @86
+        zipCloseFileInZipRaw                     @87
+        zipOpen2                                 @88
+        zipOpenNewFileInZip3                     @89
+
+        unzGetFilePos                            @100
+        unzGoToFilePos                           @101
+
+        fill_win32_filefunc                      @110