zlib 1.2.7.1

If the compressed data was already at a block boundary, then
deflateParam() would report Z_BUF_ERROR, because there was nothing
to write.  With this patch, Z_OK is returned in that case.

.gitignore

@@ -0,0 +1,25 @@
+*.diff
+*.patch
+*.orig
+*.rej
+
+*~
+*.a
+*.lo
+*.o
+*.dylib
+
+*.gcda
+*.gcno
+*.gcov
+
+/example
+/example64
+/examplesh
+/libz.so*
+/minigzip
+/minigzip64
+/minigzipsh
+/zlib.pc
+
+.DS_Store

CMakeLists.txt

@@ -0,0 +1,249 @@
+cmake_minimum_required(VERSION 2.4.4)
+set(CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS ON)
+
+project(zlib C)
+
+set(VERSION "1.2.7")
+
+option(ASM686 "Enable building i686 assembly implementation")
+option(AMD64 "Enable building amd64 assembly implementation")
+
+set(INSTALL_BIN_DIR "${CMAKE_INSTALL_PREFIX}/bin" CACHE PATH "Installation directory for executables")
+set(INSTALL_LIB_DIR "${CMAKE_INSTALL_PREFIX}/lib" CACHE PATH "Installation directory for libraries")
+set(INSTALL_INC_DIR "${CMAKE_INSTALL_PREFIX}/include" CACHE PATH "Installation directory for headers")
+set(INSTALL_MAN_DIR "${CMAKE_INSTALL_PREFIX}/share/man" CACHE PATH "Installation directory for manual pages")
+set(INSTALL_PKGCONFIG_DIR "${CMAKE_INSTALL_PREFIX}/share/pkgconfig" CACHE PATH "Installation directory for pkgconfig (.pc) files")
+
+include(CheckTypeSize)
+include(CheckFunctionExists)
+include(CheckIncludeFile)
+include(CheckCSourceCompiles)
+enable_testing()
+
+check_include_file(sys/types.h HAVE_SYS_TYPES_H)
+check_include_file(stdint.h    HAVE_STDINT_H)
+check_include_file(stddef.h    HAVE_STDDEF_H)
+
+#
+# Check to see if we have large file support
+#
+set(CMAKE_REQUIRED_DEFINITIONS -D_LARGEFILE64_SOURCE=1)
+# We add these other definitions here because CheckTypeSize.cmake
+# in CMake 2.4.x does not automatically do so and we want
+# compatibility with CMake 2.4.x.
+if(HAVE_SYS_TYPES_H)
+    list(APPEND CMAKE_REQUIRED_DEFINITIONS -DHAVE_SYS_TYPES_H)
+endif()
+if(HAVE_STDINT_H)
+    list(APPEND CMAKE_REQUIRED_DEFINITIONS -DHAVE_STDINT_H)
+endif()
+if(HAVE_STDDEF_H)
+    list(APPEND CMAKE_REQUIRED_DEFINITIONS -DHAVE_STDDEF_H)
+endif()
+check_type_size(off64_t OFF64_T)
+if(HAVE_OFF64_T)
+   add_definitions(-D_LARGEFILE64_SOURCE=1)
+endif()
+set(CMAKE_REQUIRED_DEFINITIONS) # clear variable
+
+#
+# Check for fseeko
+#
+check_function_exists(fseeko HAVE_FSEEKO)
+if(NOT HAVE_FSEEKO)
+    add_definitions(-DNO_FSEEKO)
+endif()
+
+#
+# Check for unistd.h
+#
+check_include_file(unistd.h Z_HAVE_UNISTD_H)
+
+if(MSVC)
+    set(CMAKE_DEBUG_POSTFIX "d")
+    add_definitions(-D_CRT_SECURE_NO_DEPRECATE)
+    add_definitions(-D_CRT_NONSTDC_NO_DEPRECATE)
+    include_directories(${CMAKE_CURRENT_SOURCE_DIR})
+endif()
+
+if(NOT CMAKE_CURRENT_SOURCE_DIR STREQUAL CMAKE_CURRENT_BINARY_DIR)
+    # If we're doing an out of source build and the user has a zconf.h
+    # in their source tree...
+    if(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h)
+        message(STATUS "Renaming")
+        message(STATUS "    ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h")
+        message(STATUS "to 'zconf.h.included' because this file is included with zlib")
+        message(STATUS "but CMake generates it automatically in the build directory.")
+        file(RENAME ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h.included)
+  endif()
+endif()
+
+set(ZLIB_PC ${CMAKE_CURRENT_BINARY_DIR}/zlib.pc)
+configure_file( ${CMAKE_CURRENT_SOURCE_DIR}/zlib.pc.cmakein
+		${ZLIB_PC} @ONLY)
+configure_file(	${CMAKE_CURRENT_SOURCE_DIR}/zconf.h.cmakein
+		${CMAKE_CURRENT_BINARY_DIR}/zconf.h @ONLY)
+include_directories(${CMAKE_CURRENT_BINARY_DIR} ${CMAKE_SOURCE_DIR})
+
+
+#============================================================================
+# zlib
+#============================================================================
+
+set(ZLIB_PUBLIC_HDRS
+    ${CMAKE_CURRENT_BINARY_DIR}/zconf.h
+    zlib.h
+)
+set(ZLIB_PRIVATE_HDRS
+    crc32.h
+    deflate.h
+    gzguts.h
+    inffast.h
+    inffixed.h
+    inflate.h
+    inftrees.h
+    trees.h
+    zutil.h
+)
+set(ZLIB_SRCS
+    adler32.c
+    compress.c
+    crc32.c
+    deflate.c
+    gzclose.c
+    gzlib.c
+    gzread.c
+    gzwrite.c
+    inflate.c
+    infback.c
+    inftrees.c
+    inffast.c
+    trees.c
+    uncompr.c
+    zutil.c
+)
+
+if(NOT MINGW)
+    set(ZLIB_DLL_SRCS
+        win32/zlib1.rc # If present will override custom build rule below.
+    )
+endif()
+
+if(CMAKE_COMPILER_IS_GNUCC)
+    if(ASM686)
+        set(ZLIB_ASMS contrib/asm686/match.S)
+    elseif (AMD64)
+        set(ZLIB_ASMS contrib/amd64/amd64-match.S)
+    endif ()
+
+	if(ZLIB_ASMS)
+		add_definitions(-DASMV)
+		set_source_files_properties(${ZLIB_ASMS} PROPERTIES LANGUAGE C COMPILE_FLAGS -DNO_UNDERLINE)
+	endif()
+endif()
+
+if(MSVC)
+    if(ASM686)
+		ENABLE_LANGUAGE(ASM_MASM)
+        set(ZLIB_ASMS
+			contrib/masmx86/inffas32.asm
+			contrib/masmx86/match686.asm
+		)
+    elseif (AMD64)
+		ENABLE_LANGUAGE(ASM_MASM)
+        set(ZLIB_ASMS
+			contrib/masmx64/gvmat64.asm
+			contrib/masmx64/inffasx64.asm
+		)
+    endif()
+
+	if(ZLIB_ASMS)
+		add_definitions(-DASMV -DASMINF)
+	endif()
+endif()
+
+# parse the full version number from zlib.h and include in ZLIB_FULL_VERSION
+file(READ ${CMAKE_CURRENT_SOURCE_DIR}/zlib.h _zlib_h_contents)
+string(REGEX REPLACE ".*#define[ \t]+ZLIB_VERSION[ \t]+\"([-0-9A-Za-z.]+)\".*"
+    "\\1" ZLIB_FULL_VERSION ${_zlib_h_contents})
+
+if(MINGW)
+    # This gets us DLL resource information when compiling on MinGW.
+    if(NOT CMAKE_RC_COMPILER)
+        set(CMAKE_RC_COMPILER windres.exe)
+    endif()
+
+    add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/zlib1rc.obj
+                       COMMAND ${CMAKE_RC_COMPILER}
+                            -D GCC_WINDRES
+                            -I ${CMAKE_CURRENT_SOURCE_DIR}
+                            -I ${CMAKE_CURRENT_BINARY_DIR}
+                            -o ${CMAKE_CURRENT_BINARY_DIR}/zlib1rc.obj
+                            -i ${CMAKE_CURRENT_SOURCE_DIR}/win32/zlib1.rc)
+    set(ZLIB_DLL_SRCS ${CMAKE_CURRENT_BINARY_DIR}/zlib1rc.obj)
+endif(MINGW)
+
+add_library(zlib SHARED ${ZLIB_SRCS} ${ZLIB_ASMS} ${ZLIB_DLL_SRCS} ${ZLIB_PUBLIC_HDRS} ${ZLIB_PRIVATE_HDRS})
+add_library(zlibstatic STATIC ${ZLIB_SRCS} ${ZLIB_ASMS} ${ZLIB_PUBLIC_HDRS} ${ZLIB_PRIVATE_HDRS})
+set_target_properties(zlib PROPERTIES DEFINE_SYMBOL ZLIB_DLL)
+set_target_properties(zlib PROPERTIES SOVERSION 1)
+
+if(NOT CYGWIN)
+    # This property causes shared libraries on Linux to have the full version
+    # encoded into their final filename.  We disable this on Cygwin because
+    # it causes cygz-${ZLIB_FULL_VERSION}.dll to be created when cygz.dll
+    # seems to be the default.
+    #
+    # This has no effect with MSVC, on that platform the version info for
+    # the DLL comes from the resource file win32/zlib1.rc
+    set_target_properties(zlib PROPERTIES VERSION ${ZLIB_FULL_VERSION})
+endif()
+
+if(UNIX)
+    # On unix-like platforms the library is almost always called libz
+   set_target_properties(zlib zlibstatic PROPERTIES OUTPUT_NAME z)
+   if(NOT APPLE)
+     set_target_properties(zlib PROPERTIES LINK_FLAGS "-Wl,--version-script,\"${CMAKE_CURRENT_SOURCE_DIR}/zlib.map\"")
+   endif()
+elseif(BUILD_SHARED_LIBS AND WIN32)
+    # Creates zlib1.dll when building shared library version
+    set_target_properties(zlib PROPERTIES SUFFIX "1.dll")
+endif()
+
+if(NOT SKIP_INSTALL_LIBRARIES AND NOT SKIP_INSTALL_ALL )
+    install(TARGETS zlib zlibstatic
+        RUNTIME DESTINATION "${INSTALL_BIN_DIR}"
+        ARCHIVE DESTINATION "${INSTALL_LIB_DIR}"
+        LIBRARY DESTINATION "${INSTALL_LIB_DIR}" )
+endif()
+if(NOT SKIP_INSTALL_HEADERS AND NOT SKIP_INSTALL_ALL )
+    install(FILES ${ZLIB_PUBLIC_HDRS} DESTINATION "${INSTALL_INC_DIR}")
+endif()
+if(NOT SKIP_INSTALL_FILES AND NOT SKIP_INSTALL_ALL )
+    install(FILES zlib.3 DESTINATION "${INSTALL_MAN_DIR}/man3")
+endif()
+if(NOT SKIP_INSTALL_FILES AND NOT SKIP_INSTALL_ALL )
+    install(FILES ${ZLIB_PC} DESTINATION "${INSTALL_PKGCONFIG_DIR}")
+endif()
+
+#============================================================================
+# Example binaries
+#============================================================================
+
+add_executable(example test/example.c)
+target_link_libraries(example zlib)
+add_test(example example)
+
+add_executable(minigzip test/minigzip.c)
+target_link_libraries(minigzip zlib)
+
+if(HAVE_OFF64_T)
+    add_executable(example64 test/example.c)
+    target_link_libraries(example64 zlib)
+    set_target_properties(example64 PROPERTIES COMPILE_FLAGS "-D_FILE_OFFSET_BITS=64")
+    add_test(example64 example64)
+
+    add_executable(minigzip64 test/minigzip.c)
+    target_link_libraries(minigzip64 zlib)
+    set_target_properties(minigzip64 PROPERTIES COMPILE_FLAGS "-D_FILE_OFFSET_BITS=64")
+endif()

ChangeLog

@@ -1,5 +1,854 @@
 
                 ChangeLog file for zlib
+
+Changes in 1.2.7.1 (24 Mar 2013)
+- Replace use of unsafe string functions with snprintf if available
+- Avoid including stddef.h on Windows for Z_SOLO compile [Niessink]
+- Fix gzgetc undefine when Z_PREFIX set [Turk]
+- Eliminate use of mktemp in Makefile (not always available)
+- Fix bug in 'F' mode for gzopen()
+- Add inflateGetDictionary() function
+- Correct comment in deflate.h
+- Use _snprintf for snprintf in Microsoft C
+- On Darwin, only use /usr/bin/libtool if libtool is not Apple
+- Delete "--version" file if created by "ar --version" [Richard G.]
+- Fix configure check for veracity of compiler error return codes
+- Fix CMake compilation of static lib for MSVC2010 x64
+- Remove unused variable in infback9.c
+- Fix argument checks in gzlog_compress() and gzlog_write()
+- Clean up the usage of z_const and respect const usage within zlib
+- Clean up examples/gzlog.[ch] comparisons of different types
+- Avoid shift equal to bits in type (caused endless loop)
+- Fix unintialized value bug in gzputc() introduced by const patches
+- Fix memory allocation error in examples/zran.c [Nor]
+- Fix bug where gzopen(), gzclose() would write an empty file
+- Fix bug in gzclose() when gzwrite() runs out of memory
+- Check for input buffer malloc failure in examples/gzappend.c
+- Add note to contrib/blast to use binary mode in stdio
+- Fix comparisons of differently signed integers in contrib/blast
+- Check for invalid code length codes in contrib/puff
+- Fix serious but very rare decompression bug in inftrees.c
+- Update inflateBack() comments, since inflate() can be faster
+- Use underscored I/O function names for WINAPI_FAMILY
+- Add _tr_flush_bits to the external symbols prefixed by --zprefix
+- Add contrib/vstudio/vc10 pre-build step for static only
+- Quote --version-script argument in CMakeLists.txt
+- Don't specify --version-script on Apple platforms in CMakeLists.txt
+- Fix casting error in contrib/testzlib/testzlib.c
+- Fix types in contrib/minizip to match result of get_crc_table()
+- Simplify contrib/vstudio/vc10 with 'd' suffix
+- Add TOP support to win32/Makefile.msc
+- Suport i686 and amd64 assembler builds in CMakeLists.txt
+- Fix typos in the use of _LARGEFILE64_SOURCE in zconf.h
+- Add vc11 and vc12 build files to contrib/vstudio
+- Add gzvprintf() as an undocumented function in zlib
+- Fix configure for Sun shell
+- Remove runtime check in configure for four-byte integer type
+- Add casts and consts to ease user conversion to C++
+- Add man pages for minizip and miniunzip
+- In Makefile uninstall, don't rm if preceding cd fails
+- Do not return Z_BUF_ERROR if deflateParam() has nothing to write
+
+Changes in 1.2.7 (2 May 2012)
+- Replace use of memmove() with a simple copy for portability
+- Test for existence of strerror
+- Restore gzgetc_ for backward compatibility with 1.2.6
+- Fix build with non-GNU make on Solaris
+- Require gcc 4.0 or later on Mac OS X to use the hidden attribute
+- Include unistd.h for Watcom C
+- Use __WATCOMC__ instead of __WATCOM__
+- Do not use the visibility attribute if NO_VIZ defined
+- Improve the detection of no hidden visibility attribute
+- Avoid using __int64 for gcc or solo compilation
+- Cast to char * in gzprintf to avoid warnings [Zinser]
+- Fix make_vms.com for VAX [Zinser]
+- Don't use library or built-in byte swaps
+- Simplify test and use of gcc hidden attribute
+- Fix bug in gzclose_w() when gzwrite() fails to allocate memory
+- Add "x" (O_EXCL) and "e" (O_CLOEXEC) modes support to gzopen()
+- Fix bug in test/minigzip.c for configure --solo
+- Fix contrib/vstudio project link errors [Mohanathas]
+- Add ability to choose the builder in make_vms.com [Schweda]
+- Add DESTDIR support to mingw32 win32/Makefile.gcc
+- Fix comments in win32/Makefile.gcc for proper usage
+- Allow overriding the default install locations for cmake
+- Generate and install the pkg-config file with cmake
+- Build both a static and a shared version of zlib with cmake
+- Include version symbols for cmake builds
+- If using cmake with MSVC, add the source directory to the includes
+- Remove unneeded EXTRA_CFLAGS from win32/Makefile.gcc [Truta]
+- Move obsolete emx makefile to old [Truta]
+- Allow the use of -Wundef when compiling or using zlib
+- Avoid the use of the -u option with mktemp
+- Improve inflate() documentation on the use of Z_FINISH
+- Recognize clang as gcc
+- Add gzopen_w() in Windows for wide character path names
+- Rename zconf.h in CMakeLists.txt to move it out of the way
+- Add source directory in CMakeLists.txt for building examples
+- Look in build directory for zlib.pc in CMakeLists.txt
+- Remove gzflags from zlibvc.def in vc9 and vc10
+- Fix contrib/minizip compilation in the MinGW environment
+- Update ./configure for Solaris, support --64 [Mooney]
+- Remove -R. from Solaris shared build (possible security issue)
+- Avoid race condition for parallel make (-j) running example
+- Fix type mismatch between get_crc_table() and crc_table
+- Fix parsing of version with "-" in CMakeLists.txt [Snider, Ziegler]
+- Fix the path to zlib.map in CMakeLists.txt
+- Force the native libtool in Mac OS X to avoid GNU libtool [Beebe]
+- Add instructions to win32/Makefile.gcc for shared install [Torri]
+
+Changes in 1.2.6.1 (12 Feb 2012)
+- Avoid the use of the Objective-C reserved name "id"
+- Include io.h in gzguts.h for Microsoft compilers
+- Fix problem with ./configure --prefix and gzgetc macro
+- Include gz_header definition when compiling zlib solo
+- Put gzflags() functionality back in zutil.c
+- Avoid library header include in crc32.c for Z_SOLO
+- Use name in GCC_CLASSIC as C compiler for coverage testing, if set
+- Minor cleanup in contrib/minizip/zip.c [Vollant]
+- Update make_vms.com [Zinser]
+- Remove unnecessary gzgetc_ function
+- Use optimized byte swap operations for Microsoft and GNU [Snyder]
+- Fix minor typo in zlib.h comments [Rzesniowiecki]
+
+Changes in 1.2.6 (29 Jan 2012)
+- Update the Pascal interface in contrib/pascal
+- Fix function numbers for gzgetc_ in zlibvc.def files
+- Fix configure.ac for contrib/minizip [Schiffer]
+- Fix large-entry detection in minizip on 64-bit systems [Schiffer]
+- Have ./configure use the compiler return code for error indication
+- Fix CMakeLists.txt for cross compilation [McClure]
+- Fix contrib/minizip/zip.c for 64-bit architectures [Dalsnes]
+- Fix compilation of contrib/minizip on FreeBSD [Marquez]
+- Correct suggested usages in win32/Makefile.msc [Shachar, Horvath]
+- Include io.h for Turbo C / Borland C on all platforms [Truta]
+- Make version explicit in contrib/minizip/configure.ac [Bosmans]
+- Avoid warning for no encryption in contrib/minizip/zip.c [Vollant]
+- Minor cleanup up contrib/minizip/unzip.c [Vollant]
+- Fix bug when compiling minizip with C++ [Vollant]
+- Protect for long name and extra fields in contrib/minizip [Vollant]
+- Avoid some warnings in contrib/minizip [Vollant]
+- Add -I../.. -L../.. to CFLAGS for minizip and miniunzip
+- Add missing libs to minizip linker command
+- Add support for VPATH builds in contrib/minizip
+- Add an --enable-demos option to contrib/minizip/configure
+- Add the generation of configure.log by ./configure
+- Exit when required parameters not provided to win32/Makefile.gcc
+- Have gzputc return the character written instead of the argument
+- Use the -m option on ldconfig for BSD systems [Tobias]
+- Correct in zlib.map when deflateResetKeep was added
+
+Changes in 1.2.5.3 (15 Jan 2012)
+- Restore gzgetc function for binary compatibility
+- Do not use _lseeki64 under Borland C++ [Truta]
+- Update win32/Makefile.msc to build test/*.c [Truta]
+- Remove old/visualc6 given CMakefile and other alternatives
+- Update AS400 build files and documentation [Monnerat]
+- Update win32/Makefile.gcc to build test/*.c [Truta]
+- Permit stronger flushes after Z_BLOCK flushes
+- Avoid extraneous empty blocks when doing empty flushes
+- Permit Z_NULL arguments to deflatePending
+- Allow deflatePrime() to insert bits in the middle of a stream
+- Remove second empty static block for Z_PARTIAL_FLUSH
+- Write out all of the available bits when using Z_BLOCK
+- Insert the first two strings in the hash table after a flush
+
+Changes in 1.2.5.2 (17 Dec 2011)
+- fix ld error: unable to find version dependency 'ZLIB_1.2.5'
+- use relative symlinks for shared libs
+- Avoid searching past window for Z_RLE strategy
+- Assure that high-water mark initialization is always applied in deflate
+- Add assertions to fill_window() in deflate.c to match comments
+- Update python link in README
+- Correct spelling error in gzread.c
+- Fix bug in gzgets() for a concatenated empty gzip stream
+- Correct error in comment for gz_make()
+- Change gzread() and related to ignore junk after gzip streams
+- Allow gzread() and related to continue after gzclearerr()
+- Allow gzrewind() and gzseek() after a premature end-of-file
+- Simplify gzseek() now that raw after gzip is ignored
+- Change gzgetc() to a macro for speed (~40% speedup in testing)
+- Fix gzclose() to return the actual error last encountered
+- Always add large file support for windows
+- Include zconf.h for windows large file support
+- Include zconf.h.cmakein for windows large file support
+- Update zconf.h.cmakein on make distclean
+- Merge vestigial vsnprintf determination from zutil.h to gzguts.h
+- Clarify how gzopen() appends in zlib.h comments
+- Correct documentation of gzdirect() since junk at end now ignored
+- Add a transparent write mode to gzopen() when 'T' is in the mode
+- Update python link in zlib man page
+- Get inffixed.h and MAKEFIXED result to match
+- Add a ./config --solo option to make zlib subset with no libary use
+- Add undocumented inflateResetKeep() function for CAB file decoding
+- Add --cover option to ./configure for gcc coverage testing
+- Add #define ZLIB_CONST option to use const in the z_stream interface
+- Add comment to gzdopen() in zlib.h to use dup() when using fileno()
+- Note behavior of uncompress() to provide as much data as it can
+- Add files in contrib/minizip to aid in building libminizip
+- Split off AR options in Makefile.in and configure
+- Change ON macro to Z_ARG to avoid application conflicts
+- Facilitate compilation with Borland C++ for pragmas and vsnprintf
+- Include io.h for Turbo C / Borland C++
+- Move example.c and minigzip.c to test/
+- Simplify incomplete code table filling in inflate_table()
+- Remove code from inflate.c and infback.c that is impossible to execute
+- Test the inflate code with full coverage
+- Allow deflateSetDictionary, inflateSetDictionary at any time (in raw)
+- Add deflateResetKeep and fix inflateResetKeep to retain dictionary
+- Fix gzwrite.c to accommodate reduced memory zlib compilation
+- Have inflate() with Z_FINISH avoid the allocation of a window
+- Do not set strm->adler when doing raw inflate
+- Fix gzeof() to behave just like feof() when read is not past end of file
+- Fix bug in gzread.c when end-of-file is reached
+- Avoid use of Z_BUF_ERROR in gz* functions except for premature EOF
+- Document gzread() capability to read concurrently written files
+- Remove hard-coding of resource compiler in CMakeLists.txt [Blammo]
+
+Changes in 1.2.5.1 (10 Sep 2011)
+- Update FAQ entry on shared builds (#13)
+- Avoid symbolic argument to chmod in Makefile.in
+- Fix bug and add consts in contrib/puff [Oberhumer]
+- Update contrib/puff/zeros.raw test file to have all block types
+- Add full coverage test for puff in contrib/puff/Makefile
+- Fix static-only-build install in Makefile.in
+- Fix bug in unzGetCurrentFileInfo() in contrib/minizip [Kuno]
+- Add libz.a dependency to shared in Makefile.in for parallel builds
+- Spell out "number" (instead of "nb") in zlib.h for total_in, total_out
+- Replace $(...) with `...` in configure for non-bash sh [Bowler]
+- Add darwin* to Darwin* and solaris* to SunOS\ 5* in configure [Groffen]
+- Add solaris* to Linux* in configure to allow gcc use [Groffen]
+- Add *bsd* to Linux* case in configure [Bar-Lev]
+- Add inffast.obj to dependencies in win32/Makefile.msc
+- Correct spelling error in deflate.h [Kohler]
+- Change libzdll.a again to libz.dll.a (!) in win32/Makefile.gcc
+- Add test to configure for GNU C looking for gcc in output of $cc -v
+- Add zlib.pc generation to win32/Makefile.gcc [Weigelt]
+- Fix bug in zlib.h for _FILE_OFFSET_BITS set and _LARGEFILE64_SOURCE not
+- Add comment in zlib.h that adler32_combine with len2 < 0 makes no sense
+- Make NO_DIVIDE option in adler32.c much faster (thanks to John Reiser)
+- Make stronger test in zconf.h to include unistd.h for LFS
+- Apply Darwin patches for 64-bit file offsets to contrib/minizip [Slack]
+- Fix zlib.h LFS support when Z_PREFIX used
+- Add updated as400 support (removed from old) [Monnerat]
+- Avoid deflate sensitivity to volatile input data
+- Avoid division in adler32_combine for NO_DIVIDE
+- Clarify the use of Z_FINISH with deflateBound() amount of space
+- Set binary for output file in puff.c
+- Use u4 type for crc_table to avoid conversion warnings
+- Apply casts in zlib.h to avoid conversion warnings
+- Add OF to prototypes for adler32_combine_ and crc32_combine_ [Miller]
+- Improve inflateSync() documentation to note indeterminancy
+- Add deflatePending() function to return the amount of pending output
+- Correct the spelling of "specification" in FAQ [Randers-Pehrson]
+- Add a check in configure for stdarg.h, use for gzprintf()
+- Check that pointers fit in ints when gzprint() compiled old style
+- Add dummy name before $(SHAREDLIBV) in Makefile [Bar-Lev, Bowler]
+- Delete line in configure that adds -L. libz.a to LDFLAGS [Weigelt]
+- Add debug records in assmebler code [Londer]
+- Update RFC references to use http://tools.ietf.org/html/... [Li]
+- Add --archs option, use of libtool to configure for Mac OS X [Borstel]
+
+Changes in 1.2.5 (19 Apr 2010)
+- Disable visibility attribute in win32/Makefile.gcc [Bar-Lev]
+- Default to libdir as sharedlibdir in configure [Nieder]
+- Update copyright dates on modified source files
+- Update trees.c to be able to generate modified trees.h
+- Exit configure for MinGW, suggesting win32/Makefile.gcc
+- Check for NULL path in gz_open [Homurlu]
+
+Changes in 1.2.4.5 (18 Apr 2010)
+- Set sharedlibdir in configure [Torok]
+- Set LDFLAGS in Makefile.in [Bar-Lev]
+- Avoid mkdir objs race condition in Makefile.in [Bowler]
+- Add ZLIB_INTERNAL in front of internal inter-module functions and arrays
+- Define ZLIB_INTERNAL to hide internal functions and arrays for GNU C
+- Don't use hidden attribute when it is a warning generator (e.g. Solaris)
+
+Changes in 1.2.4.4 (18 Apr 2010)
+- Fix CROSS_PREFIX executable testing, CHOST extract, mingw* [Torok]
+- Undefine _LARGEFILE64_SOURCE in zconf.h if it is zero, but not if empty
+- Try to use bash or ksh regardless of functionality of /bin/sh
+- Fix configure incompatibility with NetBSD sh
+- Remove attempt to run under bash or ksh since have better NetBSD fix
+- Fix win32/Makefile.gcc for MinGW [Bar-Lev]
+- Add diagnostic messages when using CROSS_PREFIX in configure
+- Added --sharedlibdir option to configure [Weigelt]
+- Use hidden visibility attribute when available [Frysinger]
+
+Changes in 1.2.4.3 (10 Apr 2010)
+- Only use CROSS_PREFIX in configure for ar and ranlib if they exist
+- Use CROSS_PREFIX for nm [Bar-Lev]
+- Assume _LARGEFILE64_SOURCE defined is equivalent to true
+- Avoid use of undefined symbols in #if with && and ||
+- Make *64 prototypes in gzguts.h consistent with functions
+- Add -shared load option for MinGW in configure [Bowler]
+- Move z_off64_t to public interface, use instead of off64_t
+- Remove ! from shell test in configure (not portable to Solaris)
+- Change +0 macro tests to -0 for possibly increased portability
+
+Changes in 1.2.4.2 (9 Apr 2010)
+- Add consistent carriage returns to readme.txt's in masmx86 and masmx64
+- Really provide prototypes for *64 functions when building without LFS
+- Only define unlink() in minigzip.c if unistd.h not included
+- Update README to point to contrib/vstudio project files
+- Move projects/vc6 to old/ and remove projects/
+- Include stdlib.h in minigzip.c for setmode() definition under WinCE
+- Clean up assembler builds in win32/Makefile.msc [Rowe]
+- Include sys/types.h for Microsoft for off_t definition
+- Fix memory leak on error in gz_open()
+- Symbolize nm as $NM in configure [Weigelt]
+- Use TEST_LDSHARED instead of LDSHARED to link test programs [Weigelt]
+- Add +0 to _FILE_OFFSET_BITS and _LFS64_LARGEFILE in case not defined
+- Fix bug in gzeof() to take into account unused input data
+- Avoid initialization of structures with variables in puff.c
+- Updated win32/README-WIN32.txt [Rowe]
+
+Changes in 1.2.4.1 (28 Mar 2010)
+- Remove the use of [a-z] constructs for sed in configure [gentoo 310225]
+- Remove $(SHAREDLIB) from LIBS in Makefile.in [Creech]
+- Restore "for debugging" comment on sprintf() in gzlib.c
+- Remove fdopen for MVS from gzguts.h
+- Put new README-WIN32.txt in win32 [Rowe]
+- Add check for shell to configure and invoke another shell if needed
+- Fix big fat stinking bug in gzseek() on uncompressed files
+- Remove vestigial F_OPEN64 define in zutil.h
+- Set and check the value of _LARGEFILE_SOURCE and _LARGEFILE64_SOURCE
+- Avoid errors on non-LFS systems when applications define LFS macros
+- Set EXE to ".exe" in configure for MINGW [Kahle]
+- Match crc32() in crc32.c exactly to the prototype in zlib.h [Sherrill]
+- Add prefix for cross-compilation in win32/makefile.gcc [Bar-Lev]
+- Add DLL install in win32/makefile.gcc [Bar-Lev]
+- Allow Linux* or linux* from uname in configure [Bar-Lev]
+- Allow ldconfig to be redefined in configure and Makefile.in [Bar-Lev]
+- Add cross-compilation prefixes to configure [Bar-Lev]
+- Match type exactly in gz_load() invocation in gzread.c
+- Match type exactly of zcalloc() in zutil.c to zlib.h alloc_func
+- Provide prototypes for *64 functions when building zlib without LFS
+- Don't use -lc when linking shared library on MinGW
+- Remove errno.h check in configure and vestigial errno code in zutil.h
+
+Changes in 1.2.4 (14 Mar 2010)
+- Fix VER3 extraction in configure for no fourth subversion
+- Update zlib.3, add docs to Makefile.in to make .pdf out of it
+- Add zlib.3.pdf to distribution
+- Don't set error code in gzerror() if passed pointer is NULL
+- Apply destination directory fixes to CMakeLists.txt [Lowman]
+- Move #cmakedefine's to a new zconf.in.cmakein
+- Restore zconf.h for builds that don't use configure or cmake
+- Add distclean to dummy Makefile for convenience
+- Update and improve INDEX, README, and FAQ
+- Update CMakeLists.txt for the return of zconf.h [Lowman]
+- Update contrib/vstudio/vc9 and vc10 [Vollant]
+- Change libz.dll.a back to libzdll.a in win32/Makefile.gcc
+- Apply license and readme changes to contrib/asm686 [Raiter]
+- Check file name lengths and add -c option in minigzip.c [Li]
+- Update contrib/amd64 and contrib/masmx86/ [Vollant]
+- Avoid use of "eof" parameter in trees.c to not shadow library variable
+- Update make_vms.com for removal of zlibdefs.h [Zinser]
+- Update assembler code and vstudio projects in contrib [Vollant]
+- Remove outdated assembler code contrib/masm686 and contrib/asm586
+- Remove old vc7 and vc8 from contrib/vstudio
+- Update win32/Makefile.msc, add ZLIB_VER_SUBREVISION [Rowe]
+- Fix memory leaks in gzclose_r() and gzclose_w(), file leak in gz_open()
+- Add contrib/gcc_gvmat64 for longest_match and inflate_fast [Vollant]
+- Remove *64 functions from win32/zlib.def (they're not 64-bit yet)
+- Fix bug in void-returning vsprintf() case in gzwrite.c
+- Fix name change from inflate.h in contrib/inflate86/inffas86.c
+- Check if temporary file exists before removing in make_vms.com [Zinser]
+- Fix make install and uninstall for --static option
+- Fix usage of _MSC_VER in gzguts.h and zutil.h [Truta]
+- Update readme.txt in contrib/masmx64 and masmx86 to assemble
+
+Changes in 1.2.3.9 (21 Feb 2010)
+- Expunge gzio.c
+- Move as400 build information to old
+- Fix updates in contrib/minizip and contrib/vstudio
+- Add const to vsnprintf test in configure to avoid warnings [Weigelt]
+- Delete zconf.h (made by configure) [Weigelt]
+- Change zconf.in.h to zconf.h.in per convention [Weigelt]
+- Check for NULL buf in gzgets()
+- Return empty string for gzgets() with len == 1 (like fgets())
+- Fix description of gzgets() in zlib.h for end-of-file, NULL return
+- Update minizip to 1.1 [Vollant]
+- Avoid MSVC loss of data warnings in gzread.c, gzwrite.c
+- Note in zlib.h that gzerror() should be used to distinguish from EOF
+- Remove use of snprintf() from gzlib.c
+- Fix bug in gzseek()
+- Update contrib/vstudio, adding vc9 and vc10 [Kuno, Vollant]
+- Fix zconf.h generation in CMakeLists.txt [Lowman]
+- Improve comments in zconf.h where modified by configure
+
+Changes in 1.2.3.8 (13 Feb 2010)
+- Clean up text files (tabs, trailing whitespace, etc.) [Oberhumer]
+- Use z_off64_t in gz_zero() and gz_skip() to match state->skip
+- Avoid comparison problem when sizeof(int) == sizeof(z_off64_t)
+- Revert to Makefile.in from 1.2.3.6 (live with the clutter)
+- Fix missing error return in gzflush(), add zlib.h note
+- Add *64 functions to zlib.map [Levin]
+- Fix signed/unsigned comparison in gz_comp()
+- Use SFLAGS when testing shared linking in configure
+- Add --64 option to ./configure to use -m64 with gcc
+- Fix ./configure --help to correctly name options
+- Have make fail if a test fails [Levin]
+- Avoid buffer overrun in contrib/masmx64/gvmat64.asm [Simpson]
+- Remove assembler object files from contrib
+
+Changes in 1.2.3.7 (24 Jan 2010)
+- Always gzopen() with O_LARGEFILE if available
+- Fix gzdirect() to work immediately after gzopen() or gzdopen()
+- Make gzdirect() more precise when the state changes while reading
+- Improve zlib.h documentation in many places
+- Catch memory allocation failure in gz_open()
+- Complete close operation if seek forward in gzclose_w() fails
+- Return Z_ERRNO from gzclose_r() if close() fails
+- Return Z_STREAM_ERROR instead of EOF for gzclose() being passed NULL
+- Return zero for gzwrite() errors to match zlib.h description
+- Return -1 on gzputs() error to match zlib.h description
+- Add zconf.in.h to allow recovery from configure modification [Weigelt]
+- Fix static library permissions in Makefile.in [Weigelt]
+- Avoid warnings in configure tests that hide functionality [Weigelt]
+- Add *BSD and DragonFly to Linux case in configure [gentoo 123571]
+- Change libzdll.a to libz.dll.a in win32/Makefile.gcc [gentoo 288212]
+- Avoid access of uninitialized data for first inflateReset2 call [Gomes]
+- Keep object files in subdirectories to reduce the clutter somewhat
+- Remove default Makefile and zlibdefs.h, add dummy Makefile
+- Add new external functions to Z_PREFIX, remove duplicates, z_z_ -> z_
+- Remove zlibdefs.h completely -- modify zconf.h instead
+
+Changes in 1.2.3.6 (17 Jan 2010)
+- Avoid void * arithmetic in gzread.c and gzwrite.c
+- Make compilers happier with const char * for gz_error message
+- Avoid unused parameter warning in inflate.c
+- Avoid signed-unsigned comparison warning in inflate.c
+- Indent #pragma's for traditional C
+- Fix usage of strwinerror() in glib.c, change to gz_strwinerror()
+- Correct email address in configure for system options
+- Update make_vms.com and add make_vms.com to contrib/minizip [Zinser]
+- Update zlib.map [Brown]
+- Fix Makefile.in for Solaris 10 make of example64 and minizip64 [Torok]
+- Apply various fixes to CMakeLists.txt [Lowman]
+- Add checks on len in gzread() and gzwrite()
+- Add error message for no more room for gzungetc()
+- Remove zlib version check in gzwrite()
+- Defer compression of gzprintf() result until need to
+- Use snprintf() in gzdopen() if available
+- Remove USE_MMAP configuration determination (only used by minigzip)
+- Remove examples/pigz.c (available separately)
+- Update examples/gun.c to 1.6
+
+Changes in 1.2.3.5 (8 Jan 2010)
+- Add space after #if in zutil.h for some compilers
+- Fix relatively harmless bug in deflate_fast() [Exarevsky]
+- Fix same problem in deflate_slow()
+- Add $(SHAREDLIBV) to LIBS in Makefile.in [Brown]
+- Add deflate_rle() for faster Z_RLE strategy run-length encoding
+- Add deflate_huff() for faster Z_HUFFMAN_ONLY encoding
+- Change name of "write" variable in inffast.c to avoid library collisions
+- Fix premature EOF from gzread() in gzio.c [Brown]
+- Use zlib header window size if windowBits is 0 in inflateInit2()
+- Remove compressBound() call in deflate.c to avoid linking compress.o
+- Replace use of errno in gz* with functions, support WinCE [Alves]
+- Provide alternative to perror() in minigzip.c for WinCE [Alves]
+- Don't use _vsnprintf on later versions of MSVC [Lowman]
+- Add CMake build script and input file [Lowman]
+- Update contrib/minizip to 1.1 [Svensson, Vollant]
+- Moved nintendods directory from contrib to .
+- Replace gzio.c with a new set of routines with the same functionality
+- Add gzbuffer(), gzoffset(), gzclose_r(), gzclose_w() as part of above
+- Update contrib/minizip to 1.1b
+- Change gzeof() to return 0 on error instead of -1 to agree with zlib.h
+
+Changes in 1.2.3.4 (21 Dec 2009)
+- Use old school .SUFFIXES in Makefile.in for FreeBSD compatibility
+- Update comments in configure and Makefile.in for default --shared
+- Fix test -z's in configure [Marquess]
+- Build examplesh and minigzipsh when not testing
+- Change NULL's to Z_NULL's in deflate.c and in comments in zlib.h
+- Import LDFLAGS from the environment in configure
+- Fix configure to populate SFLAGS with discovered CFLAGS options
+- Adapt make_vms.com to the new Makefile.in [Zinser]
+- Add zlib2ansi script for C++ compilation [Marquess]
+- Add _FILE_OFFSET_BITS=64 test to make test (when applicable)
+- Add AMD64 assembler code for longest match to contrib [Teterin]
+- Include options from $SFLAGS when doing $LDSHARED
+- Simplify 64-bit file support by introducing z_off64_t type
+- Make shared object files in objs directory to work around old Sun cc
+- Use only three-part version number for Darwin shared compiles
+- Add rc option to ar in Makefile.in for when ./configure not run
+- Add -WI,-rpath,. to LDFLAGS for OSF 1 V4*
+- Set LD_LIBRARYN32_PATH for SGI IRIX shared compile
+- Protect against _FILE_OFFSET_BITS being defined when compiling zlib
+- Rename Makefile.in targets allstatic to static and allshared to shared
+- Fix static and shared Makefile.in targets to be independent
+- Correct error return bug in gz_open() by setting state [Brown]
+- Put spaces before ;;'s in configure for better sh compatibility
+- Add pigz.c (parallel implementation of gzip) to examples/
+- Correct constant in crc32.c to UL [Leventhal]
+- Reject negative lengths in crc32_combine()
+- Add inflateReset2() function to work like inflateEnd()/inflateInit2()
+- Include sys/types.h for _LARGEFILE64_SOURCE [Brown]
+- Correct typo in doc/algorithm.txt [Janik]
+- Fix bug in adler32_combine() [Zhu]
+- Catch missing-end-of-block-code error in all inflates and in puff
+    Assures that random input to inflate eventually results in an error
+- Added enough.c (calculation of ENOUGH for inftrees.h) to examples/
+- Update ENOUGH and its usage to reflect discovered bounds
+- Fix gzerror() error report on empty input file [Brown]
+- Add ush casts in trees.c to avoid pedantic runtime errors
+- Fix typo in zlib.h uncompress() description [Reiss]
+- Correct inflate() comments with regard to automatic header detection
+- Remove deprecation comment on Z_PARTIAL_FLUSH (it stays)
+- Put new version of gzlog (2.0) in examples with interruption recovery
+- Add puff compile option to permit invalid distance-too-far streams
+- Add puff TEST command options, ability to read piped input
+- Prototype the *64 functions in zlib.h when _FILE_OFFSET_BITS == 64, but
+  _LARGEFILE64_SOURCE not defined
+- Fix Z_FULL_FLUSH to truly erase the past by resetting s->strstart
+- Fix deflateSetDictionary() to use all 32K for output consistency
+- Remove extraneous #define MIN_LOOKAHEAD in deflate.c (in deflate.h)
+- Clear bytes after deflate lookahead to avoid use of uninitialized data
+- Change a limit in inftrees.c to be more transparent to Coverity Prevent
+- Update win32/zlib.def with exported symbols from zlib.h
+- Correct spelling errors in zlib.h [Willem, Sobrado]
+- Allow Z_BLOCK for deflate() to force a new block
+- Allow negative bits in inflatePrime() to delete existing bit buffer
+- Add Z_TREES flush option to inflate() to return at end of trees
+- Add inflateMark() to return current state information for random access
+- Add Makefile for NintendoDS to contrib [Costa]
+- Add -w in configure compile tests to avoid spurious warnings [Beucler]
+- Fix typos in zlib.h comments for deflateSetDictionary()
+- Fix EOF detection in transparent gzread() [Maier]
+
+Changes in 1.2.3.3 (2 October 2006)
+- Make --shared the default for configure, add a --static option
+- Add compile option to permit invalid distance-too-far streams
+- Add inflateUndermine() function which is required to enable above
+- Remove use of "this" variable name for C++ compatibility [Marquess]
+- Add testing of shared library in make test, if shared library built
+- Use ftello() and fseeko() if available instead of ftell() and fseek()
+- Provide two versions of all functions that use the z_off_t type for
+  binary compatibility -- a normal version and a 64-bit offset version,
+  per the Large File Support Extension when _LARGEFILE64_SOURCE is
+  defined; use the 64-bit versions by default when _FILE_OFFSET_BITS
+  is defined to be 64
+- Add a --uname= option to configure to perhaps help with cross-compiling
+
+Changes in 1.2.3.2 (3 September 2006)
+- Turn off silly Borland warnings [Hay]
+- Use off64_t and define _LARGEFILE64_SOURCE when present
+- Fix missing dependency on inffixed.h in Makefile.in
+- Rig configure --shared to build both shared and static [Teredesai, Truta]
+- Remove zconf.in.h and instead create a new zlibdefs.h file
+- Fix contrib/minizip/unzip.c non-encrypted after encrypted [Vollant]
+- Add treebuild.xml (see http://treebuild.metux.de/) [Weigelt]
+
+Changes in 1.2.3.1 (16 August 2006)
+- Add watcom directory with OpenWatcom make files [Daniel]
+- Remove #undef of FAR in zconf.in.h for MVS [Fedtke]
+- Update make_vms.com [Zinser]
+- Use -fPIC for shared build in configure [Teredesai, Nicholson]
+- Use only major version number for libz.so on IRIX and OSF1 [Reinholdtsen]
+- Use fdopen() (not _fdopen()) for Interix in zutil.h [B<>ck]
+- Add some FAQ entries about the contrib directory
+- Update the MVS question in the FAQ
+- Avoid extraneous reads after EOF in gzio.c [Brown]
+- Correct spelling of "successfully" in gzio.c [Randers-Pehrson]
+- Add comments to zlib.h about gzerror() usage [Brown]
+- Set extra flags in gzip header in gzopen() like deflate() does
+- Make configure options more compatible with double-dash conventions
+  [Weigelt]
+- Clean up compilation under Solaris SunStudio cc [Rowe, Reinholdtsen]
+- Fix uninstall target in Makefile.in [Truta]
+- Add pkgconfig support [Weigelt]
+- Use $(DESTDIR) macro in Makefile.in [Reinholdtsen, Weigelt]
+- Replace set_data_type() with a more accurate detect_data_type() in
+  trees.c, according to the txtvsbin.txt document [Truta]
+- Swap the order of #include <stdio.h> and #include "zlib.h" in
+  gzio.c, example.c and minigzip.c [Truta]
+- Shut up annoying VS2005 warnings about standard C deprecation [Rowe,
+  Truta] (where?)
+- Fix target "clean" from win32/Makefile.bor [Truta]
+- Create .pdb and .manifest files in win32/makefile.msc [Ziegler, Rowe]
+- Update zlib www home address in win32/DLL_FAQ.txt [Truta]
+- Update contrib/masmx86/inffas32.asm for VS2005 [Vollant, Van Wassenhove]
+- Enable browse info in the "Debug" and "ASM Debug" configurations in
+  the Visual C++ 6 project, and set (non-ASM) "Debug" as default [Truta]
+- Add pkgconfig support [Weigelt]
+- Add ZLIB_VER_MAJOR, ZLIB_VER_MINOR and ZLIB_VER_REVISION in zlib.h,
+  for use in win32/zlib1.rc [Polushin, Rowe, Truta]
+- Add a document that explains the new text detection scheme to
+  doc/txtvsbin.txt [Truta]
+- Add rfc1950.txt, rfc1951.txt and rfc1952.txt to doc/ [Truta]
+- Move algorithm.txt into doc/ [Truta]
+- Synchronize FAQ with website
+- Fix compressBound(), was low for some pathological cases [Fearnley]
+- Take into account wrapper variations in deflateBound()
+- Set examples/zpipe.c input and output to binary mode for Windows
+- Update examples/zlib_how.html with new zpipe.c (also web site)
+- Fix some warnings in examples/gzlog.c and examples/zran.c (it seems
+  that gcc became pickier in 4.0)
+- Add zlib.map for Linux: "All symbols from zlib-1.1.4 remain
+  un-versioned, the patch adds versioning only for symbols introduced in
+  zlib-1.2.0 or later.  It also declares as local those symbols which are
+  not designed to be exported." [Levin]
+- Update Z_PREFIX list in zconf.in.h, add --zprefix option to configure
+- Do not initialize global static by default in trees.c, add a response
+  NO_INIT_GLOBAL_POINTERS to initialize them if needed [Marquess]
+- Don't use strerror() in gzio.c under WinCE [Yakimov]
+- Don't use errno.h in zutil.h under WinCE [Yakimov]
+- Move arguments for AR to its usage to allow replacing ar [Marot]
+- Add HAVE_VISIBILITY_PRAGMA in zconf.in.h for Mozilla [Randers-Pehrson]
+- Improve inflateInit() and inflateInit2() documentation
+- Fix structure size comment in inflate.h
+- Change configure help option from --h* to --help [Santos]
+
+Changes in 1.2.3 (18 July 2005)
+- Apply security vulnerability fixes to contrib/infback9 as well
+- Clean up some text files (carriage returns, trailing space)
+- Update testzlib, vstudio, masmx64, and masmx86 in contrib [Vollant]
+
+Changes in 1.2.2.4 (11 July 2005)
+- Add inflatePrime() function for starting inflation at bit boundary
+- Avoid some Visual C warnings in deflate.c
+- Avoid more silly Visual C warnings in inflate.c and inftrees.c for 64-bit
+  compile
+- Fix some spelling errors in comments [Betts]
+- Correct inflateInit2() error return documentation in zlib.h
+- Add zran.c example of compressed data random access to examples
+  directory, shows use of inflatePrime()
+- Fix cast for assignments to strm->state in inflate.c and infback.c
+- Fix zlibCompileFlags() in zutil.c to use 1L for long shifts [Oberhumer]
+- Move declarations of gf2 functions to right place in crc32.c [Oberhumer]
+- Add cast in trees.c t avoid a warning [Oberhumer]
+- Avoid some warnings in fitblk.c, gun.c, gzjoin.c in examples [Oberhumer]
+- Update make_vms.com [Zinser]
+- Initialize state->write in inflateReset() since copied in inflate_fast()
+- Be more strict on incomplete code sets in inflate_table() and increase
+  ENOUGH and MAXD -- this repairs a possible security vulnerability for
+  invalid inflate input.  Thanks to Tavis Ormandy and Markus Oberhumer for
+  discovering the vulnerability and providing test cases.
+- Add ia64 support to configure for HP-UX [Smith]
+- Add error return to gzread() for format or i/o error [Levin]
+- Use malloc.h for OS/2 [Necasek]
+
+Changes in 1.2.2.3 (27 May 2005)
+- Replace 1U constants in inflate.c and inftrees.c for 64-bit compile
+- Typecast fread() return values in gzio.c [Vollant]
+- Remove trailing space in minigzip.c outmode (VC++ can't deal with it)
+- Fix crc check bug in gzread() after gzungetc() [Heiner]
+- Add the deflateTune() function to adjust internal compression parameters
+- Add a fast gzip decompressor, gun.c, to examples (use of inflateBack)
+- Remove an incorrect assertion in examples/zpipe.c
+- Add C++ wrapper in infback9.h [Donais]
+- Fix bug in inflateCopy() when decoding fixed codes
+- Note in zlib.h how much deflateSetDictionary() actually uses
+- Remove USE_DICT_HEAD in deflate.c (would mess up inflate if used)
+- Add _WIN32_WCE to define WIN32 in zconf.in.h [Spencer]
+- Don't include stderr.h or errno.h for _WIN32_WCE in zutil.h [Spencer]
+- Add gzdirect() function to indicate transparent reads
+- Update contrib/minizip [Vollant]
+- Fix compilation of deflate.c when both ASMV and FASTEST [Oberhumer]
+- Add casts in crc32.c to avoid warnings [Oberhumer]
+- Add contrib/masmx64 [Vollant]
+- Update contrib/asm586, asm686, masmx86, testzlib, vstudio [Vollant]
+
+Changes in 1.2.2.2 (30 December 2004)
+- Replace structure assignments in deflate.c and inflate.c with zmemcpy to
+  avoid implicit memcpy calls (portability for no-library compilation)
+- Increase sprintf() buffer size in gzdopen() to allow for large numbers
+- Add INFLATE_STRICT to check distances against zlib header
+- Improve WinCE errno handling and comments [Chang]
+- Remove comment about no gzip header processing in FAQ
+- Add Z_FIXED strategy option to deflateInit2() to force fixed trees
+- Add updated make_vms.com [Coghlan], update README
+- Create a new "examples" directory, move gzappend.c there, add zpipe.c,
+  fitblk.c, gzlog.[ch], gzjoin.c, and zlib_how.html.
+- Add FAQ entry and comments in deflate.c on uninitialized memory access
+- Add Solaris 9 make options in configure [Gilbert]
+- Allow strerror() usage in gzio.c for STDC
+- Fix DecompressBuf in contrib/delphi/ZLib.pas [ManChesTer]
+- Update contrib/masmx86/inffas32.asm and gvmat32.asm [Vollant]
+- Use z_off_t for adler32_combine() and crc32_combine() lengths
+- Make adler32() much faster for small len
+- Use OS_CODE in deflate() default gzip header
+
+Changes in 1.2.2.1 (31 October 2004)
+- Allow inflateSetDictionary() call for raw inflate
+- Fix inflate header crc check bug for file names and comments
+- Add deflateSetHeader() and gz_header structure for custom gzip headers
+- Add inflateGetheader() to retrieve gzip headers
+- Add crc32_combine() and adler32_combine() functions
+- Add alloc_func, free_func, in_func, out_func to Z_PREFIX list
+- Use zstreamp consistently in zlib.h (inflate_back functions)
+- Remove GUNZIP condition from definition of inflate_mode in inflate.h
+  and in contrib/inflate86/inffast.S [Truta, Anderson]
+- Add support for AMD64 in contrib/inflate86/inffas86.c [Anderson]
+- Update projects/README.projects and projects/visualc6 [Truta]
+- Update win32/DLL_FAQ.txt [Truta]
+- Avoid warning under NO_GZCOMPRESS in gzio.c; fix typo [Truta]
+- Deprecate Z_ASCII; use Z_TEXT instead [Truta]
+- Use a new algorithm for setting strm->data_type in trees.c [Truta]
+- Do not define an exit() prototype in zutil.c unless DEBUG defined
+- Remove prototype of exit() from zutil.c, example.c, minigzip.c [Truta]
+- Add comment in zlib.h for Z_NO_FLUSH parameter to deflate()
+- Fix Darwin build version identification [Peterson]
+
+Changes in 1.2.2 (3 October 2004)
+- Update zlib.h comments on gzip in-memory processing
+- Set adler to 1 in inflateReset() to support Java test suite [Walles]
+- Add contrib/dotzlib [Ravn]
+- Update win32/DLL_FAQ.txt [Truta]
+- Update contrib/minizip [Vollant]
+- Move contrib/visual-basic.txt to old/ [Truta]
+- Fix assembler builds in projects/visualc6/ [Truta]
+
+Changes in 1.2.1.2 (9 September 2004)
+- Update INDEX file
+- Fix trees.c to update strm->data_type (no one ever noticed!)
+- Fix bug in error case in inflate.c, infback.c, and infback9.c [Brown]
+- Add "volatile" to crc table flag declaration (for DYNAMIC_CRC_TABLE)
+- Add limited multitasking protection to DYNAMIC_CRC_TABLE
+- Add NO_vsnprintf for VMS in zutil.h [Mozilla]
+- Don't declare strerror() under VMS [Mozilla]
+- Add comment to DYNAMIC_CRC_TABLE to use get_crc_table() to initialize
+- Update contrib/ada [Anisimkov]
+- Update contrib/minizip [Vollant]
+- Fix configure to not hardcode directories for Darwin [Peterson]
+- Fix gzio.c to not return error on empty files [Brown]
+- Fix indentation; update version in contrib/delphi/ZLib.pas and
+  contrib/pascal/zlibpas.pas [Truta]
+- Update mkasm.bat in contrib/masmx86 [Truta]
+- Update contrib/untgz [Truta]
+- Add projects/README.projects [Truta]
+- Add project for MS Visual C++ 6.0 in projects/visualc6 [Cadieux, Truta]
+- Update win32/DLL_FAQ.txt [Truta]
+- Update list of Z_PREFIX symbols in zconf.h [Randers-Pehrson, Truta]
+- Remove an unnecessary assignment to curr in inftrees.c [Truta]
+- Add OS/2 to exe builds in configure [Poltorak]
+- Remove err dummy parameter in zlib.h [Kientzle]
+
+Changes in 1.2.1.1 (9 January 2004)
+- Update email address in README
+- Several FAQ updates
+- Fix a big fat bug in inftrees.c that prevented decoding valid
+  dynamic blocks with only literals and no distance codes --
+  Thanks to "Hot Emu" for the bug report and sample file
+- Add a note to puff.c on no distance codes case.
+
+Changes in 1.2.1 (17 November 2003)
+- Remove a tab in contrib/gzappend/gzappend.c
+- Update some interfaces in contrib for new zlib functions
+- Update zlib version number in some contrib entries
+- Add Windows CE definition for ptrdiff_t in zutil.h [Mai, Truta]
+- Support shared libraries on Hurd and KFreeBSD [Brown]
+- Fix error in NO_DIVIDE option of adler32.c
+
+Changes in 1.2.0.8 (4 November 2003)
+- Update version in contrib/delphi/ZLib.pas and contrib/pascal/zlibpas.pas
+- Add experimental NO_DIVIDE #define in adler32.c
+    - Possibly faster on some processors (let me know if it is)
+- Correct Z_BLOCK to not return on first inflate call if no wrap
+- Fix strm->data_type on inflate() return to correctly indicate EOB
+- Add deflatePrime() function for appending in the middle of a byte
+- Add contrib/gzappend for an example of appending to a stream
+- Update win32/DLL_FAQ.txt [Truta]
+- Delete Turbo C comment in README [Truta]
+- Improve some indentation in zconf.h [Truta]
+- Fix infinite loop on bad input in configure script [Church]
+- Fix gzeof() for concatenated gzip files [Johnson]
+- Add example to contrib/visual-basic.txt [Michael B.]
+- Add -p to mkdir's in Makefile.in [vda]
+- Fix configure to properly detect presence or lack of printf functions
+- Add AS400 support [Monnerat]
+- Add a little Cygwin support [Wilson]
+
+Changes in 1.2.0.7 (21 September 2003)
+- Correct some debug formats in contrib/infback9
+- Cast a type in a debug statement in trees.c
+- Change search and replace delimiter in configure from % to # [Beebe]
+- Update contrib/untgz to 0.2 with various fixes [Truta]
+- Add build support for Amiga [Nikl]
+- Remove some directories in old that have been updated to 1.2
+- Add dylib building for Mac OS X in configure and Makefile.in
+- Remove old distribution stuff from Makefile
+- Update README to point to DLL_FAQ.txt, and add comment on Mac OS X
+- Update links in README
+
+Changes in 1.2.0.6 (13 September 2003)
+- Minor FAQ updates
+- Update contrib/minizip to 1.00 [Vollant]
+- Remove test of gz functions in example.c when GZ_COMPRESS defined [Truta]
+- Update POSTINC comment for 68060 [Nikl]
+- Add contrib/infback9 with deflate64 decoding (unsupported)
+- For MVS define NO_vsnprintf and undefine FAR [van Burik]
+- Add pragma for fdopen on MVS [van Burik]
+
+Changes in 1.2.0.5 (8 September 2003)
+- Add OF to inflateBackEnd() declaration in zlib.h
+- Remember start when using gzdopen in the middle of a file
+- Use internal off_t counters in gz* functions to properly handle seeks
+- Perform more rigorous check for distance-too-far in inffast.c
+- Add Z_BLOCK flush option to return from inflate at block boundary
+- Set strm->data_type on return from inflate
+    - Indicate bits unused, if at block boundary, and if in last block
+- Replace size_t with ptrdiff_t in crc32.c, and check for correct size
+- Add condition so old NO_DEFLATE define still works for compatibility
+- FAQ update regarding the Windows DLL [Truta]
+- INDEX update: add qnx entry, remove aix entry [Truta]
+- Install zlib.3 into mandir [Wilson]
+- Move contrib/zlib_dll_FAQ.txt to win32/DLL_FAQ.txt; update [Truta]
+- Adapt the zlib interface to the new DLL convention guidelines [Truta]
+- Introduce ZLIB_WINAPI macro to allow the export of functions using
+  the WINAPI calling convention, for Visual Basic [Vollant, Truta]
+- Update msdos and win32 scripts and makefiles [Truta]
+- Export symbols by name, not by ordinal, in win32/zlib.def [Truta]
+- Add contrib/ada [Anisimkov]
+- Move asm files from contrib/vstudio/vc70_32 to contrib/asm386 [Truta]
+- Rename contrib/asm386 to contrib/masmx86 [Truta, Vollant]
+- Add contrib/masm686 [Truta]
+- Fix offsets in contrib/inflate86 and contrib/masmx86/inffas32.asm
+  [Truta, Vollant]
+- Update contrib/delphi; rename to contrib/pascal; add example [Truta]
+- Remove contrib/delphi2; add a new contrib/delphi [Truta]
+- Avoid inclusion of the nonstandard <memory.h> in contrib/iostream,
+  and fix some method prototypes [Truta]
+- Fix the ZCR_SEED2 constant to avoid warnings in contrib/minizip
+  [Truta]
+- Avoid the use of backslash (\) in contrib/minizip [Vollant]
+- Fix file time handling in contrib/untgz; update makefiles [Truta]
+- Update contrib/vstudio/vc70_32 to comply with the new DLL guidelines
+  [Vollant]
+- Remove contrib/vstudio/vc15_16 [Vollant]
+- Rename contrib/vstudio/vc70_32 to contrib/vstudio/vc7 [Truta]
+- Update README.contrib [Truta]
+- Invert the assignment order of match_head and s->prev[...] in
+  INSERT_STRING [Truta]
+- Compare TOO_FAR with 32767 instead of 32768, to avoid 16-bit warnings
+  [Truta]
+- Compare function pointers with 0, not with NULL or Z_NULL [Truta]
+- Fix prototype of syncsearch in inflate.c [Truta]
+- Introduce ASMINF macro to be enabled when using an ASM implementation
+  of inflate_fast [Truta]
+- Change NO_DEFLATE to NO_GZCOMPRESS [Truta]
+- Modify test_gzio in example.c to take a single file name as a
+  parameter [Truta]
+- Exit the example.c program if gzopen fails [Truta]
+- Add type casts around strlen in example.c [Truta]
+- Remove casting to sizeof in minigzip.c; give a proper type
+  to the variable compared with SUFFIX_LEN [Truta]
+- Update definitions of STDC and STDC99 in zconf.h [Truta]
+- Synchronize zconf.h with the new Windows DLL interface [Truta]
+- Use SYS16BIT instead of __32BIT__ to distinguish between
+  16- and 32-bit platforms [Truta]
+- Use far memory allocators in small 16-bit memory models for
+  Turbo C [Truta]
+- Add info about the use of ASMV, ASMINF and ZLIB_WINAPI in
+  zlibCompileFlags [Truta]
+- Cygwin has vsnprintf [Wilson]
+- In Windows16, OS_CODE is 0, as in MSDOS [Truta]
+- In Cygwin, OS_CODE is 3 (Unix), not 11 (Windows32) [Wilson]
+
 Changes in 1.2.0.4 (10 August 2003)
 - Minor FAQ updates
 - Be more strict when checking inflateInit2's windowBits parameter
@@ -293,7 +1142,7 @@ Changes in 1.0.7 (20 Jan 1998)
 Changes in 1.0.6 (19 Jan 1998)
 - add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
   gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
-- Fix a deflate bug occuring only with compression level 0 (thanks to
+- Fix a deflate bug occurring only with compression level 0 (thanks to
   Andy Buckler for finding this one).
 - In minigzip, pass transparently also the first byte for .Z files.
 - return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()

FAQ

@@ -3,8 +3,8 @@
 
 
 If your question is not there, please check the zlib home page
-http://www.zlib.org which may have more recent information.
-The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
+http://zlib.net/ which may have more recent information.
+The lastest zlib FAQ is at http://zlib.net/zlib_faq.html
 
 
  1. Is zlib Y2K-compliant?
@@ -13,53 +13,51 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
 
  2. Where can I get a Windows DLL version?
 
-    The zlib sources can be compiled without change to produce a DLL. If you
-    want a precompiled DLL, see http://www.winimage.com/zLibDll/ . Questions
-    about the zlib DLL should be sent to Gilles Vollant (info@winimage.com).
+    The zlib sources can be compiled without change to produce a DLL.  See the
+    file win32/DLL_FAQ.txt in the zlib distribution.  Pointers to the
+    precompiled DLL are found in the zlib web site at http://zlib.net/ .
 
  3. Where can I get a Visual Basic interface to zlib?
 
     See
-        * http://www.winimage.com/zLibDll/
-        * http://www.dogma.net/markn/articles/zlibtool/zlibtool.htm
-        * contrib/visual-basic.txt in the zlib distribution
+        * http://marknelson.us/1997/01/01/zlib-engine/
+        * win32/DLL_FAQ.txt in the zlib distribution
 
- 4. compress() returns Z_BUF_ERROR
+ 4. compress() returns Z_BUF_ERROR.
 
-    Make sure that before the call of compress, the length of the compressed
-    buffer is equal to the total size of the compressed buffer and not
+    Make sure that before the call of compress(), the length of the compressed
+    buffer is equal to the available size of the compressed buffer and not
     zero.  For Visual Basic, check that this parameter is passed by reference
     ("as any"), not by value ("as long").
 
- 5. deflate() or inflate() returns Z_BUF_ERROR
+ 5. deflate() or inflate() returns Z_BUF_ERROR.
 
-    Before making the call, make sure that avail_in and avail_out are not
-    zero. When setting the parameter flush equal to Z_FINISH, also make sure
-    that avail_out is big enough to allow processing all pending input.
-    Note that a Z_BUF_ERROR is not fatal--another call to deflate() or
-    inflate() can be made with more input or output space. A Z_BUF_ERROR
-    may in fact be unavoidable depending on how the functions are used, since
-    it is not possible to tell whether or not there is more output pending
-    when strm.avail_out returns with zero.
+    Before making the call, make sure that avail_in and avail_out are not zero.
+    When setting the parameter flush equal to Z_FINISH, also make sure that
+    avail_out is big enough to allow processing all pending input.  Note that a
+    Z_BUF_ERROR is not fatal--another call to deflate() or inflate() can be
+    made with more input or output space.  A Z_BUF_ERROR may in fact be
+    unavoidable depending on how the functions are used, since it is not
+    possible to tell whether or not there is more output pending when
+    strm.avail_out returns with zero.  See http://zlib.net/zlib_how.html for a
+    heavily annotated example.
 
  6. Where's the zlib documentation (man pages, etc.)?
 
-    It's in zlib.h for the moment, and Francis S. Lin has converted it to a
-    web page zlib.html. Volunteers to transform this to Unix-style man pages,
-    please contact Jean-loup Gailly (jloup@gzip.org). Examples of zlib usage
-    are in the files example.c and minigzip.c.
+    It's in zlib.h .  Examples of zlib usage are in the files test/example.c
+    and test/minigzip.c, with more in examples/ .
 
  7. Why don't you use GNU autoconf or libtool or ...?
 
-    Because we would like to keep zlib as a very small and simple
-    package. zlib is rather portable and doesn't need much configuration.
+    Because we would like to keep zlib as a very small and simple package.
+    zlib is rather portable and doesn't need much configuration.
 
  8. I found a bug in zlib.
 
-    Most of the time, such problems are due to an incorrect usage of
-    zlib. Please try to reproduce the problem with a small program and send
-    the corresponding source to us at zlib@gzip.org . Do not send
-    multi-megabyte data files without prior agreement.
+    Most of the time, such problems are due to an incorrect usage of zlib.
+    Please try to reproduce the problem with a small program and send the
+    corresponding source to us at zlib@gzip.org .  Do not send multi-megabyte
+    data files without prior agreement.
 
  9. Why do I get "undefined reference to gzputc"?
 
@@ -72,12 +70,12 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
 
 10. I need a Delphi interface to zlib.
 
-    See the directories contrib/delphi and contrib/delphi2 in the zlib
-    distribution.
+    See the contrib/delphi directory in the zlib distribution.
 
 11. Can zlib handle .zip archives?
 
-    See the directory contrib/minizip in the zlib distribution.
+    Not by itself, no.  See the directory contrib/minizip in the zlib
+    distribution.
 
 12. Can zlib handle .Z files?
 
@@ -86,73 +84,91 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
 
 13. How can I make a Unix shared library?
 
-    make clean
-    ./configure -s
+    By default a shared (and a static) library is built for Unix.  So:
+
+    make distclean
+    ./configure
     make
 
 14. How do I install a shared zlib library on Unix?
 
+    After the above, then:
+
     make install
 
     However, many flavors of Unix come with a shared zlib already installed.
     Before going to the trouble of compiling a shared version of zlib and
     trying to install it, you may want to check if it's already there!  If you
-    can #include <zlib.h>, it's there. The -lz option will probably link to it.
+    can #include <zlib.h>, it's there.  The -lz option will probably link to
+    it.  You can check the version at the top of zlib.h or with the
+    ZLIB_VERSION symbol defined in zlib.h .
 
-15. I have a question about OttoPDF
+15. I have a question about OttoPDF.
 
     We are not the authors of OttoPDF. The real author is on the OttoPDF web
-    site Joel Hainley jhainley@myndkryme.com.
+    site: Joel Hainley, jhainley@myndkryme.com.
 
-16. Why does gzip give an error on a file I make with compress/deflate?
+16. Can zlib decode Flate data in an Adobe PDF file?
+
+    Yes. See http://www.pdflib.com/ . To modify PDF forms, see
+    http://sourceforge.net/projects/acroformtool/ .
+
+17. Why am I getting this "register_frame_info not found" error on Solaris?
+
+    After installing zlib 1.1.4 on Solaris 2.6, running applications using zlib
+    generates an error such as:
+
+        ld.so.1: rpm: fatal: relocation error: file /usr/local/lib/libz.so:
+        symbol __register_frame_info: referenced symbol not found
+
+    The symbol __register_frame_info is not part of zlib, it is generated by
+    the C compiler (cc or gcc).  You must recompile applications using zlib
+    which have this problem.  This problem is specific to Solaris.  See
+    http://www.sunfreeware.com for Solaris versions of zlib and applications
+    using zlib.
+
+18. Why does gzip give an error on a file I make with compress/deflate?
 
     The compress and deflate functions produce data in the zlib format, which
     is different and incompatible with the gzip format.  The gz* functions in
-    zlib on the other hand use the gzip format. Both the zlib and gzip
-    formats use the same compressed data format internally, but have different
-    headers and trailers around the compressed data.
+    zlib on the other hand use the gzip format.  Both the zlib and gzip formats
+    use the same compressed data format internally, but have different headers
+    and trailers around the compressed data.
 
-17. Ok, so why are there two different formats?
+19. Ok, so why are there two different formats?
 
-    The gzip format was designed to retain the directory information about
-    a single file, such as the name and last modification date. The zlib
-    format on the other hand was designed for in-memory and communication
-    channel applications, and has a much more compact header and trailer and
-    uses a faster integrity check than gzip.
+    The gzip format was designed to retain the directory information about a
+    single file, such as the name and last modification date.  The zlib format
+    on the other hand was designed for in-memory and communication channel
+    applications, and has a much more compact header and trailer and uses a
+    faster integrity check than gzip.
 
-18. Well that's nice, but how do I make a gzip file in memory?
+20. Well that's nice, but how do I make a gzip file in memory?
 
     You can request that deflate write the gzip format instead of the zlib
-    format using deflateInit2(). You can also request that inflate decode
-    the gzip format using inflateInit2(). Read zlib.h for more details.
+    format using deflateInit2().  You can also request that inflate decode the
+    gzip format using inflateInit2().  Read zlib.h for more details.
 
-    Note that you cannot specify special gzip header contents (e.g. a file
-    name or modification date), nor will inflate tell you what was in the
-    gzip header. If you need to customize the header or see what's in it,
-    you can use the raw deflate and inflate operations and the crc32()
-    function and roll your own gzip encoding and decoding. Read the gzip
-    RFC 1952 for details of the header and trailer format.
-
-19. Is zlib thread-safe?
+21. Is zlib thread-safe?
 
     Yes.  However any library routines that zlib uses and any application-
     provided memory allocation routines must also be thread-safe.  zlib's gz*
     functions use stdio library routines, and most of zlib's functions use the
-    library memory allocation routines by default. zlib's Init functions allow
-    for the application to provide custom memory allocation routines.
+    library memory allocation routines by default.  zlib's *Init* functions
+    allow for the application to provide custom memory allocation routines.
 
     Of course, you should only operate on any given zlib or gzip stream from a
     single thread at a time.
 
-20. Can I use zlib in my commercial application?
+22. Can I use zlib in my commercial application?
 
     Yes.  Please read the license in zlib.h.
 
-21. Is zlib under the GNU license?
+23. Is zlib under the GNU license?
 
     No.  Please read the license in zlib.h.
 
-22. The license says that altered source versions must be "plainly marked". So
+24. The license says that altered source versions must be "plainly marked". So
     what exactly do I need to do to meet that requirement?
 
     You need to change the ZLIB_VERSION and ZLIB_VERNUM #defines in zlib.h.  In
@@ -175,52 +191,54 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
     ZLIB_VERSION and ZLIB_VERNUM and note the origin and nature of the changes
     in zlib.h as you would for a full source distribution.
 
-23. Will zlib work on a big-endian or little-endian architecture, and can I
+25. Will zlib work on a big-endian or little-endian architecture, and can I
     exchange compressed data between them?
 
     Yes and yes.
 
-24. Will zlib work on a 64-bit machine?
+26. Will zlib work on a 64-bit machine?
 
-    It should. It has been tested on 64-bit machines, and has no dependence
-    on any data types being limited to 32-bits in length. If you have any
+    Yes.  It has been tested on 64-bit machines, and has no dependence on any
+    data types being limited to 32-bits in length.  If you have any
     difficulties, please provide a complete problem report to zlib@gzip.org
 
-25. Will zlib decompress data from the PKWare Data Compression Library?
+27. Will zlib decompress data from the PKWare Data Compression Library?
 
-    No. The PKWare DCL uses a completely different compressed data format
-    than does PKZIP and zlib. However, you can look in zlib's contrib/blast
+    No.  The PKWare DCL uses a completely different compressed data format than
+    does PKZIP and zlib.  However, you can look in zlib's contrib/blast
     directory for a possible solution to your problem.
 
-26. Can I access data randomly in a compressed stream?
+28. Can I access data randomly in a compressed stream?
 
-    No, not without some preparation. If when compressing you periodically
-    use Z_FULL_FLUSH, carefully write all the pending data at those points,
-    and keep an index of those locations, then you can start decompression
-    at those points. You have to be careful to not use Z_FULL_FLUSH too
-    often, since it can significantly degrade compression.
+    No, not without some preparation.  If when compressing you periodically use
+    Z_FULL_FLUSH, carefully write all the pending data at those points, and
+    keep an index of those locations, then you can start decompression at those
+    points.  You have to be careful to not use Z_FULL_FLUSH too often, since it
+    can significantly degrade compression.  Alternatively, you can scan a
+    deflate stream once to generate an index, and then use that index for
+    random access.  See examples/zran.c .
 
-27. Does zlib work on MVS, OS/390, CICS, etc.?
+29. Does zlib work on MVS, OS/390, CICS, etc.?
 
-    We don't know for sure. We have heard occasional reports of success on
-    these systems. If you do use it on one of these, please provide us with
-    a report, instructions, and patches that we can reference when we get
-    these questions. Thanks.
+    It has in the past, but we have not heard of any recent evidence.  There
+    were working ports of zlib 1.1.4 to MVS, but those links no longer work.
+    If you know of recent, successful applications of zlib on these operating
+    systems, please let us know.  Thanks.
 
-28. Is there some simpler, easier to read version of inflate I can look at
-    to understand the deflate format?
+30. Is there some simpler, easier to read version of inflate I can look at to
+    understand the deflate format?
 
     First off, you should read RFC 1951.  Second, yes.  Look in zlib's
     contrib/puff directory.
 
-29. Does zlib infringe on any patents?
+31. Does zlib infringe on any patents?
 
     As far as we know, no.  In fact, that was originally the whole point behind
     zlib.  Look here for some more information:
 
     http://www.gzip.org/#faq11
 
-30. Can zlib work with greater than 4 GB of data?
+32. Can zlib work with greater than 4 GB of data?
 
     Yes.  inflate() and deflate() will process any amount of data correctly.
     Each call of inflate() or deflate() is limited to input and output chunks
@@ -234,21 +252,22 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
     single call.  gzseek() and gztell() may be limited to 4 GB depending on how
     zlib is compiled.  See the zlibCompileFlags() function in zlib.h.
 
-    The word "may" appears several times above since there is a 4 GB limit
-    only if the compiler's "long" type is 32 bits. If the compiler's "long"
-    type is 64 bits, then the limit is 16 exabytes.
+    The word "may" appears several times above since there is a 4 GB limit only
+    if the compiler's "long" type is 32 bits.  If the compiler's "long" type is
+    64 bits, then the limit is 16 exabytes.
 
-31. Does zlib have any security vulnerabilities?
+33. Does zlib have any security vulnerabilities?
 
-    The only one that we are aware of is potentially in gzprintf(). If zlib
-    is compiled to use sprintf() or vsprintf(), then there is no protection
-    against a buffer overflow of a 4K string space, other than the caller of
-    gzprintf() assuring that the output will not exceed 4K. On the other
-    hand, if zlib is compiled to use snprintf() or vsnprintf(), which should
-    normally be the case, then there is no vulnerability. The ./configure
-    script will display warnings if an insecure variation of sprintf() will
-    be used by gzprintf(). Also the zlibCompileFlags() function will return
-    information on what variant of sprintf() is used by gzprintf().
+    The only one that we are aware of is potentially in gzprintf().  If zlib is
+    compiled to use sprintf() or vsprintf(), then there is no protection
+    against a buffer overflow of an 8K string space (or other value as set by
+    gzbuffer()), other than the caller of gzprintf() assuring that the output
+    will not exceed 8K.  On the other hand, if zlib is compiled to use
+    snprintf() or vsnprintf(), which should normally be the case, then there is
+    no vulnerability.  The ./configure script will display warnings if an
+    insecure variation of sprintf() will be used by gzprintf().  Also the
+    zlibCompileFlags() function will return information on what variant of
+    sprintf() is used by gzprintf().
 
     If you don't have snprintf() or vsnprintf() and would like one, you can
     find a portable implementation here:
@@ -256,45 +275,59 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
         http://www.ijs.si/software/snprintf/
 
     Note that you should be using the most recent version of zlib.  Versions
-    1.1.3 and before were subject to a double-free vulnerability.
+    1.1.3 and before were subject to a double-free vulnerability, and versions
+    1.2.1 and 1.2.2 were subject to an access exception when decompressing
+    invalid compressed data.
 
-32. Is there a Java version of zlib?
+34. Is there a Java version of zlib?
 
     Probably what you want is to use zlib in Java. zlib is already included
     as part of the Java SDK in the java.util.zip package. If you really want
     a version of zlib written in the Java language, look on the zlib home
-    page for links: http://www.zlib.org/
+    page for links: http://zlib.net/ .
 
-33. I get this or that compiler or source-code scanner warning when I crank it
-    up to maximally-pendantic. Can't you guys write proper code?
+35. I get this or that compiler or source-code scanner warning when I crank it
+    up to maximally-pedantic. Can't you guys write proper code?
 
     Many years ago, we gave up attempting to avoid warnings on every compiler
     in the universe.  It just got to be a waste of time, and some compilers
-    were downright silly. So now, we simply make sure that the code always
-    works.
+    were downright silly as well as contradicted each other.  So now, we simply
+    make sure that the code always works.
 
-34. Will zlib read the (insert any ancient or arcane format here) compressed
+36. Valgrind (or some similar memory access checker) says that deflate is
+    performing a conditional jump that depends on an uninitialized value.
+    Isn't that a bug?
+
+    No.  That is intentional for performance reasons, and the output of deflate
+    is not affected.  This only started showing up recently since zlib 1.2.x
+    uses malloc() by default for allocations, whereas earlier versions used
+    calloc(), which zeros out the allocated memory.  Even though the code was
+    correct, versions 1.2.4 and later was changed to not stimulate these
+    checkers.
+
+37. Will zlib read the (insert any ancient or arcane format here) compressed
     data format?
 
     Probably not. Look in the comp.compression FAQ for pointers to various
     formats and associated software.
 
-35. How can I encrypt/decrypt zip files with zlib?
+38. How can I encrypt/decrypt zip files with zlib?
 
-    zlib doesn't support encryption. The original PKZIP encryption is very weak
-    and can be broken with freely available programs. To get strong encryption,
-    use gpg ( http://www.gnupg.org/ ) which already includes zlib compression.
-    For PKZIP compatible "encryption", look at http://www.info-zip.org/
+    zlib doesn't support encryption.  The original PKZIP encryption is very
+    weak and can be broken with freely available programs.  To get strong
+    encryption, use GnuPG, http://www.gnupg.org/ , which already includes zlib
+    compression.  For PKZIP compatible "encryption", look at
+    http://www.info-zip.org/
 
-36. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings?
+39. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings?
 
     "gzip" is the gzip format, and "deflate" is the zlib format.  They should
-    probably have called the second one "zlib" instead to avoid confusion
-    with the raw deflate compressed data format. While the HTTP 1.1 RFC 2616
+    probably have called the second one "zlib" instead to avoid confusion with
+    the raw deflate compressed data format.  While the HTTP 1.1 RFC 2616
     correctly points to the zlib specification in RFC 1950 for the "deflate"
     transfer encoding, there have been reports of servers and browsers that
     incorrectly produce or expect raw deflate data per the deflate
-    specficiation in RFC 1951, most notably Microsoft. So even though the
+    specification in RFC 1951, most notably Microsoft.  So even though the
     "deflate" transfer encoding using the zlib format would be the more
     efficient approach (and in fact exactly what the zlib format was designed
     for), using the "gzip" transfer encoding is probably more reliable due to
@@ -302,14 +335,34 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
 
     Bottom line: use the gzip format for HTTP 1.1 encoding.
 
-37. Does zlib support the new "Deflate64" format introduced by PKWare?
+40. Does zlib support the new "Deflate64" format introduced by PKWare?
 
     No.  PKWare has apparently decided to keep that format proprietary, since
-    they have not documented it as they have previous compression formats.
-    In any case, the compression improvements are so modest compared to other
-    more modern approaches, that it's not worth the effort to implement.
+    they have not documented it as they have previous compression formats.  In
+    any case, the compression improvements are so modest compared to other more
+    modern approaches, that it's not worth the effort to implement.
 
-38. Can you please sign these lengthy legal documents and fax them back to us
+41. I'm having a problem with the zip functions in zlib, can you help?
+
+    There are no zip functions in zlib.  You are probably using minizip by
+    Giles Vollant, which is found in the contrib directory of zlib.  It is not
+    part of zlib.  In fact none of the stuff in contrib is part of zlib.  The
+    files in there are not supported by the zlib authors.  You need to contact
+    the authors of the respective contribution for help.
+
+42. The match.asm code in contrib is under the GNU General Public License.
+    Since it's part of zlib, doesn't that mean that all of zlib falls under the
+    GNU GPL?
+
+    No.  The files in contrib are not part of zlib.  They were contributed by
+    other authors and are provided as a convenience to the user within the zlib
+    distribution.  Each item in contrib has its own license.
+
+43. Is zlib subject to export controls?  What is its ECCN?
+
+    zlib is not subject to export controls, and so is classified as EAR99.
+
+44. Can you please sign these lengthy legal documents and fax them back to us
     so that we can use your software in our product?
 
     No. Go away. Shoo.

INDEX

@@ -1,20 +1,37 @@
+CMakeLists.txt  cmake build file
 ChangeLog       history of changes
 FAQ             Frequently Asked Questions about zlib
 INDEX           this file
-Makefile        makefile for Unix (generated by configure)
-Makefile.in     makefile for Unix (template for configure)
+Makefile        dummy Makefile that tells you to ./configure
+Makefile.in     template for Unix Makefile
 README          guess what
-algorithm.txt   description of the (de)compression algorithm
 configure       configure script for Unix
-zconf.in.h      template for zconf.h (used by configure)
+make_vms.com    makefile for VMS
+test/example.c  zlib usages examples for build testing
+test/minigzip.c minimal gzip-like functionality for build testing
+test/infcover.c inf*.c code coverage for build coverage testing
+treebuild.xml   XML description of source file dependencies
+zconf.h.cmakein zconf.h template for cmake
+zconf.h.in      zconf.h template for configure
+zlib.3          Man page for zlib
+zlib.3.pdf      Man page in PDF format
+zlib.map        Linux symbol information
+zlib.pc.in      Template for pkg-config descriptor
+zlib.pc.cmakein zlib.pc template for cmake
+zlib2ansi       perl script to convert source files for C++ compilation
 
-aix/            instructions for building an AIX shared library
+amiga/          makefiles for Amiga SAS C
+as400/          makefiles for AS/400
+doc/            documentation for formats and algorithms
 msdos/          makefiles for MSDOS
+nintendods/     makefile for Nintendo DS
 old/            makefiles for various architectures and zlib documentation
                 files that have not yet been updated for zlib 1.2.x
+qnx/            makefiles for QNX
+watcom/         makefiles for OpenWatcom
 win32/          makefiles for Windows
 
-                zlib public header files (must be kept):
+                zlib public header files (required for library use):
 zconf.h
 zlib.h
 
@@ -25,7 +42,11 @@ crc32.c
 crc32.h
 deflate.c
 deflate.h
-gzio.c
+gzclose.c
+gzguts.h
+gzlib.c
+gzread.c
+gzwrite.c
 infback.c
 inffast.c
 inffast.h
@@ -40,9 +61,8 @@ uncompr.c
 zutil.c
 zutil.h
 
-                source files for sample programs:
-example.c
-minigzip.c
+                source files for sample programs
+See examples/README.examples
 
-                unsupported contribution by third parties
+                unsupported contributions by third parties
 See contrib/README.contrib

Makefile

@@ -1,179 +1,5 @@
-# Makefile for zlib
-# Copyright (C) 1995-2003 Jean-loup Gailly.
-# For conditions of distribution and use, see copyright notice in zlib.h 
+all:
+	-@echo "Please use ./configure first.  Thank you."
 
-# To compile and test, type:
-#   ./configure; make test
-# The call of configure is optional if you don't have special requirements
-# If you wish to build zlib as a shared library, use: ./configure -s
-
-# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
-#    make install
-# To install in $HOME instead of /usr/local, use:
-#    make install prefix=$HOME
-
-CC=cc
-
-CFLAGS=-O
-#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
-#CFLAGS=-g -DDEBUG
-#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
-#           -Wstrict-prototypes -Wmissing-prototypes
-
-LDFLAGS=libz.a
-LDSHARED=$(CC)
-CPP=$(CC) -E
-
-VER=1.2.0.4
-LIBS=libz.a
-SHAREDLIB=libz.so
-
-AR=ar rc
-RANLIB=ranlib
-TAR=tar
-SHELL=/bin/sh
-
-prefix = /usr/local
-exec_prefix = ${prefix}
-libdir = ${exec_prefix}/lib
-includedir = ${prefix}/include
-
-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
-       zutil.o inflate.o infback.o inftrees.o inffast.o
-
-OBJA =
-# to use the asm code: make OBJA=match.o
-
-TEST_OBJS = example.o minigzip.o
-
-# Note: this hasn't been updated for zlib 1.2.0
-DISTFILES = README FAQ INDEX ChangeLog configure Make*[a-z0-9] *.[ch] *.mms \
-  algorithm.txt zlib.3 zlib.html \
-  msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \
-  nt/Make*[a-z0-9] nt/zlib.dnt amiga/Make*.??? os2/M*.os2 os2/zlib.def \
-  contrib/RE*.contrib contrib/*.txt contrib/asm386/*.asm contrib/asm386/*.c \
-  contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/asm[56]86/*.?86 \
-  contrib/asm[56]86/*.S contrib/iostream/*.cpp \
-  contrib/iostream/*.h  contrib/iostream2/*.h contrib/iostream2/*.cpp \
-  contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32 \
-  contrib/minizip/[CM]*[pe] contrib/minizip/*.[ch] contrib/minizip/*.[td]?? \
-  contrib/delphi*/*.???
-
-all: example minigzip
-
-check: test
-test: all
-	@LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
-	echo hello world | ./minigzip | ./minigzip -d || \
-	  echo '		*** minigzip test FAILED ***' ; \
-	if ./example; then \
-	  echo '		*** zlib test OK ***'; \
-	else \
-	  echo '		*** zlib test FAILED ***'; \
-	fi
-
-libz.a: $(OBJS) $(OBJA)
-	$(AR) $@ $(OBJS) $(OBJA)
-	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
-
-match.o: match.S
-	$(CPP) match.S > _match.s
-	$(CC) -c _match.s
-	mv _match.o match.o
-	rm -f _match.s
-
-$(SHAREDLIB).$(VER): $(OBJS)
-	$(LDSHARED) -o $@ $(OBJS)
-	rm -f $(SHAREDLIB) $(SHAREDLIB).1
-	ln -s $@ $(SHAREDLIB)
-	ln -s $@ $(SHAREDLIB).1
-
-example: example.o $(LIBS)
-	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
-
-minigzip: minigzip.o $(LIBS)
-	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
-
-install: $(LIBS)
-	-@if [ ! -d $(exec_prefix) ]; then mkdir $(exec_prefix); fi
-	-@if [ ! -d $(includedir)  ]; then mkdir $(includedir); fi
-	-@if [ ! -d $(libdir) ]; then mkdir $(libdir); fi
-	cp zlib.h zconf.h $(includedir)
-	chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h
-	cp $(LIBS) $(libdir)
-	cd $(libdir); chmod 755 $(LIBS)
-	-@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
-	cd $(libdir); if test -f $(SHAREDLIB).$(VER); then \
-	  rm -f $(SHAREDLIB) $(SHAREDLIB).1; \
-	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB); \
-	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB).1; \
-	  (ldconfig || true)  >/dev/null 2>&1; \
-	fi
-# The ranlib in install is needed on NeXTSTEP which checks file times
-# ldconfig is for Linux
-
-uninstall:
-	cd $(includedir); \
-	v=$(VER); \
-	if test -f zlib.h; then \
-	  v=`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`; \
-          rm -f zlib.h zconf.h; \
-	fi; \
-	cd $(libdir); rm -f libz.a; \
-	if test -f $(SHAREDLIB).$$v; then \
-	  rm -f $(SHAREDLIB).$$v $(SHAREDLIB) $(SHAREDLIB).1; \
-	fi
-
-mostlyclean: clean
-clean:
-	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz so_locations \
-	   _match.s maketree
-
-maintainer-clean: distclean
-distclean:	clean
-	cp -p Makefile.in Makefile
-	cp -p zconf.in.h zconf.h
-
-zip:
-	mv Makefile Makefile~; cp -p Makefile.in Makefile
-	rm -f test.c ztest*.c contrib/minizip/test.zip
-	v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
-	zip -ul9 zlib$$v $(DISTFILES)
-	mv Makefile~ Makefile
-
-dist:
-	echo Warning: this hasn't been updated for zlib 1.2.0 -- don't use
-	mv Makefile Makefile~; cp -p Makefile.in Makefile
-	rm -f test.c ztest*.c contrib/minizip/test.zip
-	d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
-	rm -f $$d.tar.gz; \
-	if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \
-	files=""; \
-	for f in $(DISTFILES); do files="$$files $$d/$$f"; done; \
-	cd ..; \
-	GZIP=-9 $(TAR) chofz $$d/$$d.tar.gz $$files; \
-	if test ! -d $$d; then rm -f $$d; fi
-	mv Makefile~ Makefile
-
-tags:	
-	etags *.[ch]
-
-depend:
-	makedepend -- $(CFLAGS) -- *.[ch]
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-adler32.o: zlib.h zconf.h
-compress.o: zlib.h zconf.h
-crc32.o: crc32.h zlib.h zconf.h
-deflate.o: deflate.h zutil.h zlib.h zconf.h
-example.o: zlib.h zconf.h
-gzio.o: zutil.h zlib.h zconf.h
-inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
-inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
-infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
-inftrees.o: zutil.h zlib.h zconf.h inftrees.h
-minigzip.o:  zlib.h zconf.h 
-trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
-uncompr.o: zlib.h zconf.h
-zutil.o: zutil.h zlib.h zconf.h  
+distclean:
+	make -f Makefile.in distclean

Makefile.in

@@ -1,11 +1,15 @@
 # Makefile for zlib
-# Copyright (C) 1995-2003 Jean-loup Gailly.
+# Copyright (C) 1995-2012 Jean-loup Gailly, Mark Adler
 # For conditions of distribution and use, see copyright notice in zlib.h
 
 # To compile and test, type:
 #    ./configure; make test
-# The call of configure is optional if you don't have special requirements
-# If you wish to build zlib as a shared library, use: ./configure -s
+# Normally configure builds both a static and a shared library.
+# If you want to build just a static library, use: ./configure --static
+
+# To use the asm code, type:
+#    cp contrib/asm?86/match.S ./match.S
+#    make LOC=-DASMV OBJA=match.o
 
 # To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
 #    make install
@@ -20,60 +24,108 @@ CFLAGS=-O
 #CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
 #           -Wstrict-prototypes -Wmissing-prototypes
 
-LDFLAGS=libz.a
+SFLAGS=-O
+LDFLAGS=
+TEST_LDFLAGS=-L. libz.a
 LDSHARED=$(CC)
 CPP=$(CC) -E
 
-VER=1.2.0.4
-LIBS=libz.a
+STATICLIB=libz.a
 SHAREDLIB=libz.so
+SHAREDLIBV=libz.so.1.2.7.1
+SHAREDLIBM=libz.so.1
+LIBS=$(STATICLIB) $(SHAREDLIBV)
 
-AR=ar rc
+AR=ar
+ARFLAGS=rc
 RANLIB=ranlib
+LDCONFIG=ldconfig
+LDSHAREDLIBC=-lc
 TAR=tar
 SHELL=/bin/sh
+EXE=
 
 prefix = /usr/local
 exec_prefix = ${prefix}
 libdir = ${exec_prefix}/lib
+sharedlibdir = ${libdir}
 includedir = ${prefix}/include
+mandir = ${prefix}/share/man
+man3dir = ${mandir}/man3
+pkgconfigdir = ${libdir}/pkgconfig
 
-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
-       zutil.o inflate.o infback.o inftrees.o inffast.o
+OBJZ = adler32.o crc32.o deflate.o infback.o inffast.o inflate.o inftrees.o trees.o zutil.o
+OBJG = compress.o uncompr.o gzclose.o gzlib.o gzread.o gzwrite.o
+OBJC = $(OBJZ) $(OBJG)
 
+PIC_OBJZ = adler32.lo crc32.lo deflate.lo infback.lo inffast.lo inflate.lo inftrees.lo trees.lo zutil.lo
+PIC_OBJG = compress.lo uncompr.lo gzclose.lo gzlib.lo gzread.lo gzwrite.lo
+PIC_OBJC = $(PIC_OBJZ) $(PIC_OBJG)
+
+# to use the asm code: make OBJA=match.o, PIC_OBJA=match.lo
 OBJA =
-# to use the asm code: make OBJA=match.o
+PIC_OBJA =
 
-TEST_OBJS = example.o minigzip.o
+OBJS = $(OBJC) $(OBJA)
 
-# Note: this hasn't been updated for zlib 1.2.0
-DISTFILES = README FAQ INDEX ChangeLog configure Make*[a-z0-9] *.[ch] *.mms \
-  algorithm.txt zlib.3 zlib.html \
-  msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \
-  nt/Make*[a-z0-9] nt/zlib.dnt amiga/Make*.??? os2/M*.os2 os2/zlib.def \
-  contrib/RE*.contrib contrib/*.txt contrib/asm386/*.asm contrib/asm386/*.c \
-  contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/asm[56]86/*.?86 \
-  contrib/asm[56]86/*.S contrib/iostream/*.cpp \
-  contrib/iostream/*.h  contrib/iostream2/*.h contrib/iostream2/*.cpp \
-  contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32 \
-  contrib/minizip/[CM]*[pe] contrib/minizip/*.[ch] contrib/minizip/*.[td]?? \
-  contrib/delphi*/*.???
+PIC_OBJS = $(PIC_OBJC) $(PIC_OBJA)
 
-all: example minigzip
+all: static shared
+
+static: example$(EXE) minigzip$(EXE)
+
+shared: examplesh$(EXE) minigzipsh$(EXE)
+
+all64: example64$(EXE) minigzip64$(EXE)
 
 check: test
-test: all
-	@LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
-	echo hello world | ./minigzip | ./minigzip -d || \
-	  echo '		*** minigzip test FAILED ***' ; \
-	if ./example; then \
+
+test: all teststatic testshared
+
+teststatic: static
+	@TMPST=tmpst_$$; \
+	if echo hello world | ./minigzip | ./minigzip -d && ./example $$TMPST ; then \
 	  echo '		*** zlib test OK ***'; \
 	else \
-	  echo '		*** zlib test FAILED ***'; \
-	fi
+	  echo '		*** zlib test FAILED ***'; false; \
+	fi; \
+	rm -f $$TMPST
 
-libz.a: $(OBJS) $(OBJA)
-	$(AR) $@ $(OBJS) $(OBJA)
+testshared: shared
+	@LD_LIBRARY_PATH=`pwd`:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
+	LD_LIBRARYN32_PATH=`pwd`:$(LD_LIBRARYN32_PATH) ; export LD_LIBRARYN32_PATH; \
+	DYLD_LIBRARY_PATH=`pwd`:$(DYLD_LIBRARY_PATH) ; export DYLD_LIBRARY_PATH; \
+	SHLIB_PATH=`pwd`:$(SHLIB_PATH) ; export SHLIB_PATH; \
+	TMPSH=tmpsh_$$; \
+	if echo hello world | ./minigzipsh | ./minigzipsh -d && ./examplesh $$TMPSH; then \
+	  echo '		*** zlib shared test OK ***'; \
+	else \
+	  echo '		*** zlib shared test FAILED ***'; false; \
+	fi; \
+	rm -f $$TMPSH
+
+test64: all64
+	@TMP64=tmp64_$$; \
+	if echo hello world | ./minigzip64 | ./minigzip64 -d && ./example64 $$TMP64; then \
+	  echo '		*** zlib 64-bit test OK ***'; \
+	else \
+	  echo '		*** zlib 64-bit test FAILED ***'; false; \
+	fi; \
+	rm -f $$TMP64
+
+infcover.o: test/infcover.c zlib.h zconf.h
+	$(CC) $(CFLAGS) -I. -c -o $@ test/infcover.c
+
+infcover: infcover.o libz.a
+	$(CC) $(CFLAGS) -o $@ infcover.o libz.a
+
+cover: infcover
+	rm -f *.gcda
+	./infcover
+	gcov inf*.c
+
+libz.a: $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
 	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
 
 match.o: match.S
@@ -82,78 +134,130 @@ match.o: match.S
 	mv _match.o match.o
 	rm -f _match.s
 
-$(SHAREDLIB).$(VER): $(OBJS)
-	$(LDSHARED) -o $@ $(OBJS)
-	rm -f $(SHAREDLIB) $(SHAREDLIB).1
+match.lo: match.S
+	$(CPP) match.S > _match.s
+	$(CC) -c -fPIC _match.s
+	mv _match.o match.lo
+	rm -f _match.s
+
+example.o: test/example.c zlib.h zconf.h
+	$(CC) $(CFLAGS) -I. -c -o $@ test/example.c
+
+minigzip.o: test/minigzip.c zlib.h zconf.h
+	$(CC) $(CFLAGS) -I. -c -o $@ test/minigzip.c
+
+example64.o: test/example.c zlib.h zconf.h
+	$(CC) $(CFLAGS) -I. -D_FILE_OFFSET_BITS=64 -c -o $@ test/example.c
+
+minigzip64.o: test/minigzip.c zlib.h zconf.h
+	$(CC) $(CFLAGS) -I. -D_FILE_OFFSET_BITS=64 -c -o $@ test/minigzip.c
+
+.SUFFIXES: .lo
+
+.c.lo:
+	-@mkdir objs 2>/dev/null || test -d objs
+	$(CC) $(SFLAGS) -DPIC -c -o objs/$*.o $<
+	-@mv objs/$*.o $@
+
+placebo $(SHAREDLIBV): $(PIC_OBJS) libz.a
+	$(LDSHARED) $(SFLAGS) -o $@ $(PIC_OBJS) $(LDSHAREDLIBC) $(LDFLAGS)
+	rm -f $(SHAREDLIB) $(SHAREDLIBM)
 	ln -s $@ $(SHAREDLIB)
-	ln -s $@ $(SHAREDLIB).1
+	ln -s $@ $(SHAREDLIBM)
+	-@rmdir objs
 
-example: example.o $(LIBS)
-	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
+example$(EXE): example.o $(STATICLIB)
+	$(CC) $(CFLAGS) -o $@ example.o $(TEST_LDFLAGS)
 
-minigzip: minigzip.o $(LIBS)
-	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
+minigzip$(EXE): minigzip.o $(STATICLIB)
+	$(CC) $(CFLAGS) -o $@ minigzip.o $(TEST_LDFLAGS)
 
-install: $(LIBS)
-	-@if [ ! -d $(exec_prefix) ]; then mkdir $(exec_prefix); fi
-	-@if [ ! -d $(includedir)  ]; then mkdir $(includedir); fi
-	-@if [ ! -d $(libdir) ]; then mkdir $(libdir); fi
-	cp zlib.h zconf.h $(includedir)
-	chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h
-	cp $(LIBS) $(libdir)
-	cd $(libdir); chmod 755 $(LIBS)
-	-@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
-	cd $(libdir); if test -f $(SHAREDLIB).$(VER); then \
-	  rm -f $(SHAREDLIB) $(SHAREDLIB).1; \
-	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB); \
-	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB).1; \
-	  (ldconfig || true)  >/dev/null 2>&1; \
+examplesh$(EXE): example.o $(SHAREDLIBV)
+	$(CC) $(CFLAGS) -o $@ example.o -L. $(SHAREDLIBV)
+
+minigzipsh$(EXE): minigzip.o $(SHAREDLIBV)
+	$(CC) $(CFLAGS) -o $@ minigzip.o -L. $(SHAREDLIBV)
+
+example64$(EXE): example64.o $(STATICLIB)
+	$(CC) $(CFLAGS) -o $@ example64.o $(TEST_LDFLAGS)
+
+minigzip64$(EXE): minigzip64.o $(STATICLIB)
+	$(CC) $(CFLAGS) -o $@ minigzip64.o $(TEST_LDFLAGS)
+
+install-libs: $(LIBS)
+	-@if [ ! -d $(DESTDIR)$(exec_prefix)  ]; then mkdir -p $(DESTDIR)$(exec_prefix); fi
+	-@if [ ! -d $(DESTDIR)$(libdir)       ]; then mkdir -p $(DESTDIR)$(libdir); fi
+	-@if [ ! -d $(DESTDIR)$(sharedlibdir) ]; then mkdir -p $(DESTDIR)$(sharedlibdir); fi
+	-@if [ ! -d $(DESTDIR)$(man3dir)      ]; then mkdir -p $(DESTDIR)$(man3dir); fi
+	-@if [ ! -d $(DESTDIR)$(pkgconfigdir) ]; then mkdir -p $(DESTDIR)$(pkgconfigdir); fi
+	cp $(STATICLIB) $(DESTDIR)$(libdir)
+	chmod 644 $(DESTDIR)$(libdir)/$(STATICLIB)
+	-@($(RANLIB) $(DESTDIR)$(libdir)/libz.a || true) >/dev/null 2>&1
+	-@if test -n "$(SHAREDLIBV)"; then \
+	  cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir); \
+	  echo "cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)"; \
+	  chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV); \
+	  echo "chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV)"; \
+	  rm -f $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \
+	  ln -s $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB); \
+	  ln -s $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \
+	  ($(LDCONFIG) || true)  >/dev/null 2>&1; \
 	fi
+	cp zlib.3 $(DESTDIR)$(man3dir)
+	chmod 644 $(DESTDIR)$(man3dir)/zlib.3
+	cp zlib.pc $(DESTDIR)$(pkgconfigdir)
+	chmod 644 $(DESTDIR)$(pkgconfigdir)/zlib.pc
 # The ranlib in install is needed on NeXTSTEP which checks file times
 # ldconfig is for Linux
 
+install: install-libs
+	-@if [ ! -d $(DESTDIR)$(includedir)   ]; then mkdir -p $(DESTDIR)$(includedir); fi
+	cp zlib.h zconf.h $(DESTDIR)$(includedir)
+	chmod 644 $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h
+
 uninstall:
-	cd $(includedir); \
-	v=$(VER); \
-	if test -f zlib.h; then \
-	  v=`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`; \
-          rm -f zlib.h zconf.h; \
-	fi; \
-	cd $(libdir); rm -f libz.a; \
-	if test -f $(SHAREDLIB).$$v; then \
-	  rm -f $(SHAREDLIB).$$v $(SHAREDLIB) $(SHAREDLIB).1; \
+	cd $(DESTDIR)$(includedir) && rm -f zlib.h zconf.h
+	cd $(DESTDIR)$(libdir) && rm -f libz.a; \
+	if test -n "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \
+	  rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \
 	fi
+	cd $(DESTDIR)$(man3dir) && rm -f zlib.3
+	cd $(DESTDIR)$(pkgconfigdir) && rm -f zlib.pc
+
+docs: zlib.3.pdf
+
+zlib.3.pdf: zlib.3
+	groff -mandoc -f H -T ps zlib.3 | ps2pdf - zlib.3.pdf
+
+zconf.h.cmakein: zconf.h.in
+	-@ TEMPFILE=zconfh_$$; \
+	echo "/#define ZCONF_H/ a\\\\\n#cmakedefine Z_PREFIX\\\\\n#cmakedefine Z_HAVE_UNISTD_H\n" >> $$TEMPFILE &&\
+	sed -f $$TEMPFILE zconf.h.in > zconf.h.cmakein &&\
+	touch -r zconf.h.in zconf.h.cmakein &&\
+	rm $$TEMPFILE
+
+zconf: zconf.h.in
+	cp -p zconf.h.in zconf.h
 
 mostlyclean: clean
 clean:
-	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz so_locations \
-	   _match.s maketree
+	rm -f *.o *.lo *~ \
+	   example$(EXE) minigzip$(EXE) examplesh$(EXE) minigzipsh$(EXE) \
+	   example64$(EXE) minigzip64$(EXE) \
+	   infcover \
+	   libz.* foo.gz so_locations \
+	   _match.s maketree contrib/infback9/*.o
+	rm -rf objs
+	rm -f *.gcda *.gcno *.gcov
+	rm -f contrib/infback9/*.gcda contrib/infback9/*.gcno contrib/infback9/*.gcov
 
 maintainer-clean: distclean
-distclean:	clean
-	cp -p Makefile.in Makefile
-	cp -p zconf.in.h zconf.h
-
-zip:
-	mv Makefile Makefile~; cp -p Makefile.in Makefile
-	rm -f test.c ztest*.c contrib/minizip/test.zip
-	v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
-	zip -ul9 zlib$$v $(DISTFILES)
-	mv Makefile~ Makefile
-
-dist:
-	echo Warning: this hasn't been updated for zlib 1.2.0 -- don't use
-	mv Makefile Makefile~; cp -p Makefile.in Makefile
-	rm -f test.c ztest*.c contrib/minizip/test.zip
-	d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
-	rm -f $$d.tar.gz; \
-	if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \
-	files=""; \
-	for f in $(DISTFILES); do files="$$files $$d/$$f"; done; \
-	cd ..; \
-	GZIP=-9 $(TAR) chofz $$d/$$d.tar.gz $$files; \
-	if test ! -d $$d; then rm -f $$d; fi
-	mv Makefile~ Makefile
+distclean: clean zconf zconf.h.cmakein docs
+	rm -f Makefile zlib.pc configure.log
+	-@rm -f .DS_Store
+	-@printf 'all:\n\t-@echo "Please use ./configure first.  Thank you."\n' > Makefile
+	-@printf '\ndistclean:\n\tmake -f Makefile.in distclean\n' >> Makefile
+	-@touch -r Makefile.in Makefile
 
 tags:
 	etags *.[ch]
@@ -163,17 +267,22 @@ depend:
 
 # DO NOT DELETE THIS LINE -- make depend depends on it.
 
-adler32.o: zlib.h zconf.h
-compress.o: zlib.h zconf.h
-crc32.o: crc32.h zlib.h zconf.h
+adler32.o zutil.o: zutil.h zlib.h zconf.h
+gzclose.o gzlib.o gzread.o gzwrite.o: zlib.h zconf.h gzguts.h
+compress.o example.o minigzip.o uncompr.o: zlib.h zconf.h
+crc32.o: zutil.h zlib.h zconf.h crc32.h
 deflate.o: deflate.h zutil.h zlib.h zconf.h
-example.o: zlib.h zconf.h
-gzio.o: zutil.h zlib.h zconf.h
+infback.o inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h inffixed.h
 inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
-inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
-infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
 inftrees.o: zutil.h zlib.h zconf.h inftrees.h
-minigzip.o:  zlib.h zconf.h 
 trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
-uncompr.o: zlib.h zconf.h
-zutil.o: zutil.h zlib.h zconf.h  
+
+adler32.lo zutil.lo: zutil.h zlib.h zconf.h
+gzclose.lo gzlib.lo gzread.lo gzwrite.lo: zlib.h zconf.h gzguts.h
+compress.lo example.lo minigzip.lo uncompr.lo: zlib.h zconf.h
+crc32.lo: zutil.h zlib.h zconf.h crc32.h
+deflate.lo: deflate.h zutil.h zlib.h zconf.h
+infback.lo inflate.lo: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h inffixed.h
+inffast.lo: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inftrees.lo: zutil.h zlib.h zconf.h inftrees.h
+trees.lo: deflate.h zutil.h zlib.h zconf.h trees.h

README

@@ -1,76 +1,61 @@
 ZLIB DATA COMPRESSION LIBRARY
 
-zlib 1.2.0.4 is a general purpose data compression library.  All the code is
+zlib 1.2.7.1 is a general purpose data compression library.  All the code is
 thread safe.  The data format used by the zlib library is described by RFCs
 (Request for Comments) 1950 to 1952 in the files
-http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
-and rfc1952.txt (gzip format). These documents are also available in other
-formats from ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
+http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
+rfc1952 (gzip format).
 
 All functions of the compression library are documented in the file zlib.h
-(volunteer to write man pages welcome, contact jloup@gzip.org). A usage example
-of the library is given in the file example.c which also tests that the library
-is working correctly. Another example is given in the file minigzip.c. The
-compression library itself is composed of all source files except example.c and
-minigzip.c.
+(volunteer to write man pages welcome, contact zlib@gzip.org).  A usage example
+of the library is given in the file test/example.c which also tests that
+the library is working correctly.  Another example is given in the file
+test/minigzip.c.  The compression library itself is composed of all source
+files in the root directory.
 
 To compile all files and run the test program, follow the instructions given at
-the top of Makefile. In short "make test; make install" should work for most
-machines. For Unix: "./configure; make test; make install" For MSDOS, use one
-of the special makefiles such as Makefile.msc. For VMS, use Make_vms.com or
-descrip.mms.
+the top of Makefile.in.  In short "./configure; make test", and if that goes
+well, "make install" should work for most flavors of Unix.  For Windows, use
+one of the special makefiles in win32/ or contrib/vstudio/ .  For VMS, use
+make_vms.com.
 
 Questions about zlib should be sent to <zlib@gzip.org>, or to Gilles Vollant
 <info@winimage.com> for the Windows DLL version.  The zlib home page is
-http://www.zlib.org or http://www.gzip.org/zlib/ Before reporting a problem,
-please check this site to verify that you have the latest version of zlib;
-otherwise get the latest version and check whether the problem still exists or
-not.
+http://zlib.net/ .  Before reporting a problem, please check this site to
+verify that you have the latest version of zlib; otherwise get the latest
+version and check whether the problem still exists or not.
 
-PLEASE read the zlib FAQ http://www.gzip.org/zlib/zlib_faq.html before asking
-for help.
+PLEASE read the zlib FAQ http://zlib.net/zlib_faq.html before asking for help.
 
 Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan.  1997
-issue of  Dr. Dobb's Journal; a copy of the article is available in
-http://dogma.net/markn/articles/zlibtool/zlibtool.htm
+issue of Dr.  Dobb's Journal; a copy of the article is available at
+http://marknelson.us/1997/01/01/zlib-engine/ .
 
-The changes made in version 1.2.0.4 are documented in the file ChangeLog.
+The changes made in version 1.2.7.1 are documented in the file ChangeLog.
 
-Unsupported third party contributions are provided in directory "contrib".
+Unsupported third party contributions are provided in directory contrib/ .
 
-A Java implementation of zlib is available in the Java Development Kit
-http://www.javasoft.com/products/JDK/1.1/docs/api/Package-java.util.zip.html
-See the zlib home page http://www.zlib.org for details.
+zlib is available in Java using the java.util.zip package, documented at
+http://java.sun.com/developer/technicalArticles/Programming/compression/ .
 
-A Perl interface to zlib written by Paul Marquess <pmqs@cpan.org> is in the
-CPAN (Comprehensive Perl Archive Network) sites
-http://www.cpan.org/modules/by-module/Compress/
+A Perl interface to zlib written by Paul Marquess <pmqs@cpan.org> is available
+at CPAN (Comprehensive Perl Archive Network) sites, including
+http://search.cpan.org/~pmqs/IO-Compress-Zlib/ .
 
-A Python interface to zlib written by A.M. Kuchling <amk@magnet.com> is
+A Python interface to zlib written by A.M. Kuchling <amk@amk.ca> is
 available in Python 1.5 and later versions, see
-http://www.python.org/doc/lib/module-zlib.html
+http://docs.python.org/library/zlib.html .
 
-A zlib binding for TCL written by Andreas Kupries <a.kupries@westend.com> is
-availlable at http://www.westend.com/~kupries/doc/trf/man/man.html
+zlib is built into tcl: http://wiki.tcl.tk/4610 .
 
 An experimental package to read and write files in .zip format, written on top
-of zlib by Gilles Vollant <info@winimage.com>, is available at
-http://www.winimage.com/zLibDll/unzip.html and also in the contrib/minizip
-directory of zlib.
+of zlib by Gilles Vollant <info@winimage.com>, is available in the
+contrib/minizip directory of zlib.
 
 
 Notes for some targets:
 
-- To build a Windows DLL version, include in a DLL project zlib.def, zlib.rc
-  and all .c files except example.c and minigzip.c; compile with -DZLIB_DLL The
-  zlib DLL support was initially done by Alessandro Iacopetti and is now
-  maintained by Gilles Vollant <info@winimage.com>. Check the zlib DLL home
-  page at http://www.winimage.com/zLibDll
-
-  From Visual Basic, you can call the DLL functions which do not take a
-  structure as argument: compress, uncompress and all gz* functions. See
-  contrib/visual-basic.txt for more information, or get
-  http://www.tcfb.com/dowseware/cmp-z-it.zip
+- For Windows DLL versions, please see win32/DLL_FAQ.txt
 
 - For 64-bit Irix, deflate.c must be compiled without any optimization. With
   -O, one libpng test fails. The test works in 32 bit mode (with the -n32
@@ -85,25 +70,21 @@ Notes for some targets:
 - zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works with
   other compilers. Use "make test" to check your compiler.
 
-- gzdopen is not supported on RISCOS, BEOS and by some Mac compilers.
+- gzdopen is not supported on RISCOS or BEOS.
 
-- For Turbo C the small model is supported only with reduced performance to
-  avoid any far allocation; it was tested with -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
-
-- For PalmOs, see http://www.cs.uit.no/~perm/PASTA/pilot/software.html Per
-  Harald Myrvang <perm@stud.cs.uit.no>
+- For PalmOs, see http://palmzlib.sourceforge.net/
 
 
 Acknowledgments:
 
-  The deflate format used by zlib was defined by Phil Katz. The deflate
-  and zlib specifications were written by L. Peter Deutsch. Thanks to all the
-  people who reported problems and suggested various improvements in zlib;
-  they are too numerous to cite here.
+  The deflate format used by zlib was defined by Phil Katz.  The deflate and
+  zlib specifications were written by L.  Peter Deutsch.  Thanks to all the
+  people who reported problems and suggested various improvements in zlib; they
+  are too numerous to cite here.
 
 Copyright notice:
 
- (C) 1995-2003 Jean-loup Gailly and Mark Adler
+ (C) 1995-2012 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
@@ -124,13 +105,11 @@ Copyright notice:
   Jean-loup Gailly        Mark Adler
   jloup@gzip.org          madler@alumni.caltech.edu
 
-If you use the zlib library in a product, we would appreciate *not*
-receiving lengthy legal documents to sign. The sources are provided
-for free but without warranty of any kind.  The library has been
-entirely written by Jean-loup Gailly and Mark Adler; it does not
-include third-party code.
+If you use the zlib library in a product, we would appreciate *not* receiving
+lengthy legal documents to sign.  The sources are provided for free but without
+warranty of any kind.  The library has been entirely written by Jean-loup
+Gailly and Mark Adler; it does not include third-party code.
 
-If you redistribute modified sources, we would appreciate that you include
-in the file ChangeLog history information documenting your changes. Please
-read the FAQ for more information on the distribution of modified source
-versions.
+If you redistribute modified sources, we would appreciate that you include in
+the file ChangeLog history information documenting your changes.  Please read
+the FAQ for more information on the distribution of modified source versions.

adler32.c

@@ -1,49 +1,179 @@
 /* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2011 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
 /* @(#) $Id$ */
 
-#define ZLIB_INTERNAL
-#include "zlib.h"
+#include "zutil.h"
 
-#define BASE 65521L /* largest prime smaller than 65536 */
+#define local static
+
+local uLong adler32_combine_ OF((uLong adler1, uLong adler2, z_off64_t len2));
+
+#define BASE 65521      /* largest prime smaller than 65536 */
 #define NMAX 5552
 /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
 
-#define DO1(buf,i)  {s1 += buf[i]; s2 += s1;}
+#define DO1(buf,i)  {adler += (buf)[i]; sum2 += adler;}
 #define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
 #define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
 #define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
 #define DO16(buf)   DO8(buf,0); DO8(buf,8);
 
+/* use NO_DIVIDE if your processor does not do division in hardware --
+   try it both ways to see which is faster */
+#ifdef NO_DIVIDE
+/* note that this assumes BASE is 65521, where 65536 % 65521 == 15
+   (thank you to John Reiser for pointing this out) */
+#  define CHOP(a) \
+    do { \
+        unsigned long tmp = a >> 16; \
+        a &= 0xffffUL; \
+        a += (tmp << 4) - tmp; \
+    } while (0)
+#  define MOD28(a) \
+    do { \
+        CHOP(a); \
+        if (a >= BASE) a -= BASE; \
+    } while (0)
+#  define MOD(a) \
+    do { \
+        CHOP(a); \
+        MOD28(a); \
+    } while (0)
+#  define MOD63(a) \
+    do { /* this assumes a is not negative */ \
+        z_off64_t tmp = a >> 32; \
+        a &= 0xffffffffL; \
+        a += (tmp << 8) - (tmp << 5) + tmp; \
+        tmp = a >> 16; \
+        a &= 0xffffL; \
+        a += (tmp << 4) - tmp; \
+        tmp = a >> 16; \
+        a &= 0xffffL; \
+        a += (tmp << 4) - tmp; \
+        if (a >= BASE) a -= BASE; \
+    } while (0)
+#else
+#  define MOD(a) a %= BASE
+#  define MOD28(a) a %= BASE
+#  define MOD63(a) a %= BASE
+#endif
+
 /* ========================================================================= */
 uLong ZEXPORT adler32(adler, buf, len)
     uLong adler;
     const Bytef *buf;
     uInt len;
 {
-    unsigned long s1 = adler & 0xffff;
-    unsigned long s2 = (adler >> 16) & 0xffff;
-    int k;
+    unsigned long sum2;
+    unsigned n;
 
-    if (buf == Z_NULL) return 1L;
+    /* split Adler-32 into component sums */
+    sum2 = (adler >> 16) & 0xffff;
+    adler &= 0xffff;
 
-    while (len > 0) {
-        k = len < NMAX ? (int)len : NMAX;
-        len -= k;
-        while (k >= 16) {
+    /* in case user likes doing a byte at a time, keep it fast */
+    if (len == 1) {
+        adler += buf[0];
+        if (adler >= BASE)
+            adler -= BASE;
+        sum2 += adler;
+        if (sum2 >= BASE)
+            sum2 -= BASE;
+        return adler | (sum2 << 16);
+    }
+
+    /* initial Adler-32 value (deferred check for len == 1 speed) */
+    if (buf == Z_NULL)
+        return 1L;
+
+    /* in case short lengths are provided, keep it somewhat fast */
+    if (len < 16) {
+        while (len--) {
+            adler += *buf++;
+            sum2 += adler;
+        }
+        if (adler >= BASE)
+            adler -= BASE;
+        MOD28(sum2);            /* only added so many BASE's */
+        return adler | (sum2 << 16);
+    }
+
+    /* do length NMAX blocks -- requires just one modulo operation */
+    while (len >= NMAX) {
+        len -= NMAX;
+        n = NMAX / 16;          /* NMAX is divisible by 16 */
+        do {
+            DO16(buf);          /* 16 sums unrolled */
+            buf += 16;
+        } while (--n);
+        MOD(adler);
+        MOD(sum2);
+    }
+
+    /* do remaining bytes (less than NMAX, still just one modulo) */
+    if (len) {                  /* avoid modulos if none remaining */
+        while (len >= 16) {
+            len -= 16;
             DO16(buf);
             buf += 16;
-            k -= 16;
         }
-        if (k != 0) do {
-            s1 += *buf++;
-            s2 += s1;
-        } while (--k);
-        s1 %= BASE;
-        s2 %= BASE;
+        while (len--) {
+            adler += *buf++;
+            sum2 += adler;
         }
-    return (s2 << 16) | s1;
+        MOD(adler);
+        MOD(sum2);
+    }
+
+    /* return recombined sums */
+    return adler | (sum2 << 16);
+}
+
+/* ========================================================================= */
+local uLong adler32_combine_(adler1, adler2, len2)
+    uLong adler1;
+    uLong adler2;
+    z_off64_t len2;
+{
+    unsigned long sum1;
+    unsigned long sum2;
+    unsigned rem;
+
+    /* for negative len, return invalid adler32 as a clue for debugging */
+    if (len2 < 0)
+        return 0xffffffffUL;
+
+    /* the derivation of this formula is left as an exercise for the reader */
+    MOD63(len2);                /* assumes len2 >= 0 */
+    rem = (unsigned)len2;
+    sum1 = adler1 & 0xffff;
+    sum2 = rem * sum1;
+    MOD(sum2);
+    sum1 += (adler2 & 0xffff) + BASE - 1;
+    sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
+    if (sum1 >= BASE) sum1 -= BASE;
+    if (sum1 >= BASE) sum1 -= BASE;
+    if (sum2 >= (BASE << 1)) sum2 -= (BASE << 1);
+    if (sum2 >= BASE) sum2 -= BASE;
+    return sum1 | (sum2 << 16);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT adler32_combine(adler1, adler2, len2)
+    uLong adler1;
+    uLong adler2;
+    z_off_t len2;
+{
+    return adler32_combine_(adler1, adler2, len2);
+}
+
+uLong ZEXPORT adler32_combine64(adler1, adler2, len2)
+    uLong adler1;
+    uLong adler2;
+    z_off64_t len2;
+{
+    return adler32_combine_(adler1, adler2, len2);
 }

amiga/Makefile.pup

@@ -0,0 +1,69 @@
+# Amiga powerUP (TM) Makefile
+# makefile for libpng and SAS C V6.58/7.00 PPC compiler
+# Copyright (C) 1998 by Andreas R. Kleinert
+
+LIBNAME	= libzip.a
+
+CC	= scppc
+CFLAGS	= NOSTKCHK NOSINT OPTIMIZE OPTGO OPTPEEP OPTINLOCAL OPTINL \
+	  OPTLOOP OPTRDEP=8 OPTDEP=8 OPTCOMP=8 NOVER
+AR	= ppc-amigaos-ar cr
+RANLIB	= ppc-amigaos-ranlib
+LD	= ppc-amigaos-ld -r
+LDFLAGS	= -o
+LDLIBS	= LIB:scppc.a LIB:end.o
+RM	= delete quiet
+
+OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \
+       uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example minigzip
+
+check: test
+test: all
+	example
+	echo hello world | minigzip | minigzip -d
+
+$(LIBNAME): $(OBJS)
+	$(AR) $@ $(OBJS)
+	-$(RANLIB) $@
+
+example: example.o $(LIBNAME)
+	$(LD) $(LDFLAGS) $@ LIB:c_ppc.o $@.o $(LIBNAME) $(LDLIBS)
+
+minigzip: minigzip.o $(LIBNAME)
+	$(LD) $(LDFLAGS) $@ LIB:c_ppc.o $@.o $(LIBNAME) $(LDLIBS)
+
+mostlyclean: clean
+clean:
+	$(RM) *.o example minigzip $(LIBNAME) foo.gz
+
+zip:
+	zip -ul9 zlib README ChangeLog Makefile Make????.??? Makefile.?? \
+	  descrip.mms *.[ch]
+
+tgz:
+	cd ..; tar cfz zlib/zlib.tgz zlib/README zlib/ChangeLog zlib/Makefile \
+	  zlib/Make????.??? zlib/Makefile.?? zlib/descrip.mms zlib/*.[ch]
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: crc32.h zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzclose.o: zlib.h zconf.h gzguts.h
+gzlib.o: zlib.h zconf.h gzguts.h
+gzread.o: zlib.h zconf.h gzguts.h
+gzwrite.o: zlib.h zconf.h gzguts.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+minigzip.o: zlib.h zconf.h
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h

amiga/Makefile.sas

@@ -10,22 +10,24 @@ CFLAGS=OPT
 LDFLAGS=LIB z.lib
 
 SCOPTIONS=OPTSCHED OPTINLINE OPTALIAS OPTTIME OPTINLOCAL STRMERGE \
-       NOICONS PARMS=BOTH NOSTACKCHECK UTILLIB NOVERSION ERRORREXX 
+       NOICONS PARMS=BOTH NOSTACKCHECK UTILLIB NOVERSION ERRORREXX \
+       DEF=POSTINC
 
-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
-       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \
+       uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o
 
 TEST_OBJS = example.o minigzip.o
 
 all: SCOPTIONS example minigzip
 
+check: test
 test: all
-	`cd`/example
+	example
 	echo hello world | minigzip | minigzip -d
 
 install: z.lib
-	copy zlib.h zconf.h INCLUDE: clone
-	copy z.lib LIB: clone
+	copy clone zlib.h zconf.h INCLUDE:
+	copy clone z.lib LIB:
 
 z.lib: $(OBJS)
 	oml z.lib r $(OBJS)
@@ -36,29 +38,31 @@ example: example.o z.lib
 minigzip: minigzip.o z.lib
 	$(CC) $(CFLAGS) LINK TO $@ minigzip.o $(LDFLAGS)
 
+mostlyclean: clean
 clean:
-	-delete force quiet *.o example minigzip z.lib foo.gz *.lnk SCOPTIONS
+	-delete force quiet example minigzip *.o z.lib foo.gz *.lnk SCOPTIONS
 
-SCOPTIONS: Smakefile
+SCOPTIONS: Makefile.sas
 	copy to $@ <from <
 $(SCOPTIONS)
 <
 
 # DO NOT DELETE THIS LINE -- make depend depends on it.
 
-adler32.o: zutil.h zlib.h zconf.h
+adler32.o: zlib.h zconf.h
 compress.o: zlib.h zconf.h
-crc32.o: zutil.h zlib.h zconf.h
+crc32.o: crc32.h zlib.h zconf.h
 deflate.o: deflate.h zutil.h zlib.h zconf.h
 example.o: zlib.h zconf.h
-gzio.o: zutil.h zlib.h zconf.h
-infblock.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
-infcodes.o: zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h inffast.h
-inffast.o: zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
-inflate.o: zutil.h zlib.h zconf.h infblock.h
+gzclose.o: zlib.h zconf.h gzguts.h
+gzlib.o: zlib.h zconf.h gzguts.h
+gzread.o: zlib.h zconf.h gzguts.h
+gzwrite.o: zlib.h zconf.h gzguts.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
 inftrees.o: zutil.h zlib.h zconf.h inftrees.h
-infutil.o: zutil.h zlib.h zconf.h inftrees.h infutil.h
 minigzip.o: zlib.h zconf.h
-trees.o: deflate.h zutil.h zlib.h zconf.h
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
 uncompr.o: zlib.h zconf.h
 zutil.o: zutil.h zlib.h zconf.h

as400/bndsrc

@@ -0,0 +1,215 @@
+STRPGMEXP PGMLVL(*CURRENT) SIGNATURE('ZLIB')
+
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+/*   Version 1.1.3 entry points.                                    */
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+
+/********************************************************************/
+/*   *MODULE      ADLER32      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("adler32")
+
+/********************************************************************/
+/*   *MODULE      COMPRESS     ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("compress")
+  EXPORT SYMBOL("compress2")
+
+/********************************************************************/
+/*   *MODULE      CRC32        ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("crc32")
+  EXPORT SYMBOL("get_crc_table")
+
+/********************************************************************/
+/*   *MODULE      DEFLATE      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("deflate")
+  EXPORT SYMBOL("deflateEnd")
+  EXPORT SYMBOL("deflateSetDictionary")
+  EXPORT SYMBOL("deflateCopy")
+  EXPORT SYMBOL("deflateReset")
+  EXPORT SYMBOL("deflateParams")
+  EXPORT SYMBOL("deflatePrime")
+  EXPORT SYMBOL("deflateInit_")
+  EXPORT SYMBOL("deflateInit2_")
+
+/********************************************************************/
+/*   *MODULE      GZIO         ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("gzopen")
+  EXPORT SYMBOL("gzdopen")
+  EXPORT SYMBOL("gzsetparams")
+  EXPORT SYMBOL("gzread")
+  EXPORT SYMBOL("gzwrite")
+  EXPORT SYMBOL("gzprintf")
+  EXPORT SYMBOL("gzputs")
+  EXPORT SYMBOL("gzgets")
+  EXPORT SYMBOL("gzputc")
+  EXPORT SYMBOL("gzgetc")
+  EXPORT SYMBOL("gzflush")
+  EXPORT SYMBOL("gzseek")
+  EXPORT SYMBOL("gzrewind")
+  EXPORT SYMBOL("gztell")
+  EXPORT SYMBOL("gzeof")
+  EXPORT SYMBOL("gzclose")
+  EXPORT SYMBOL("gzerror")
+
+/********************************************************************/
+/*   *MODULE      INFLATE      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("inflate")
+  EXPORT SYMBOL("inflateEnd")
+  EXPORT SYMBOL("inflateSetDictionary")
+  EXPORT SYMBOL("inflateSync")
+  EXPORT SYMBOL("inflateReset")
+  EXPORT SYMBOL("inflateInit_")
+  EXPORT SYMBOL("inflateInit2_")
+  EXPORT SYMBOL("inflateSyncPoint")
+
+/********************************************************************/
+/*   *MODULE      UNCOMPR      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("uncompress")
+
+/********************************************************************/
+/*   *MODULE      ZUTIL        ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("zlibVersion")
+  EXPORT SYMBOL("zError")
+
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+/*   Version 1.2.1 additional entry points.                         */
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+
+/********************************************************************/
+/*   *MODULE      COMPRESS     ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("compressBound")
+
+/********************************************************************/
+/*   *MODULE      DEFLATE      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("deflateBound")
+
+/********************************************************************/
+/*   *MODULE      GZIO         ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("gzungetc")
+  EXPORT SYMBOL("gzclearerr")
+
+/********************************************************************/
+/*   *MODULE      INFBACK      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("inflateBack")
+  EXPORT SYMBOL("inflateBackEnd")
+  EXPORT SYMBOL("inflateBackInit_")
+
+/********************************************************************/
+/*   *MODULE      INFLATE      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("inflateCopy")
+
+/********************************************************************/
+/*   *MODULE      ZUTIL        ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("zlibCompileFlags")
+
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+/*   Version 1.2.5 additional entry points.                         */
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+
+/********************************************************************/
+/*   *MODULE      ADLER32      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("adler32_combine")
+  EXPORT SYMBOL("adler32_combine64")
+
+/********************************************************************/
+/*   *MODULE      CRC32        ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("crc32_combine")
+  EXPORT SYMBOL("crc32_combine64")
+
+/********************************************************************/
+/*   *MODULE      GZLIB        ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("gzbuffer")
+  EXPORT SYMBOL("gzoffset")
+  EXPORT SYMBOL("gzoffset64")
+  EXPORT SYMBOL("gzopen64")
+  EXPORT SYMBOL("gzseek64")
+  EXPORT SYMBOL("gztell64")
+
+/********************************************************************/
+/*   *MODULE      GZREAD       ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("gzclose_r")
+
+/********************************************************************/
+/*   *MODULE      GZWRITE      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("gzclose_w")
+
+/********************************************************************/
+/*   *MODULE      INFLATE      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("inflateMark")
+  EXPORT SYMBOL("inflatePrime")
+  EXPORT SYMBOL("inflateReset2")
+  EXPORT SYMBOL("inflateUndermine")
+
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+/*   Version 1.2.6 additional entry points.                         */
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+
+/********************************************************************/
+/*   *MODULE      DEFLATE      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("deflateResetKeep")
+  EXPORT SYMBOL("deflatePending")
+
+/********************************************************************/
+/*   *MODULE      GZWRITE      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("gzgetc_")
+
+/********************************************************************/
+/*   *MODULE      INFLATE      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("inflateResetKeep")
+
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+/*   Version 1.2.8 additional entry points.                         */
+/*@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@*/
+
+/********************************************************************/
+/*   *MODULE      INFLATE      ZLIB         01/02/01  00:15:09      */
+/********************************************************************/
+
+  EXPORT SYMBOL("inflateGetDictionary")
+
+ENDPGMEXP

as400/compile.clp

@@ -0,0 +1,110 @@
+/******************************************************************************/
+/*                                                                            */
+/*  ZLIB                                                                      */
+/*                                                                            */
+/*    Compile sources into modules and link them into a service program.      */
+/*                                                                            */
+/******************************************************************************/
+
+             PGM
+
+/*      Configuration adjustable parameters.                                  */
+
+             DCL        VAR(&SRCLIB) TYPE(*CHAR) LEN(10) +
+                          VALUE('ZLIB')                         /* Source library. */
+             DCL        VAR(&SRCFILE) TYPE(*CHAR) LEN(10) +
+                          VALUE('SOURCES')                      /* Source member file. */
+             DCL        VAR(&CTLFILE) TYPE(*CHAR) LEN(10) +
+                          VALUE('TOOLS')                        /* Control member file. */
+
+             DCL        VAR(&MODLIB) TYPE(*CHAR) LEN(10) +
+                          VALUE('ZLIB')                         /* Module library. */
+
+             DCL        VAR(&SRVLIB) TYPE(*CHAR) LEN(10) +
+                          VALUE('LGPL')                         /* Service program library. */
+
+             DCL        VAR(&CFLAGS) TYPE(*CHAR) +
+                          VALUE('OPTIMIZE(40)')                 /* Compile options. */
+
+             DCL        VAR(&TGTRLS) TYPE(*CHAR) +
+                          VALUE('V5R3M0')                       /* Target release. */
+
+
+/*      Working storage.                                                      */
+
+             DCL        VAR(&CMDLEN) TYPE(*DEC) LEN(15 5) VALUE(300)    /* Command length. */
+             DCL        VAR(&CMD) TYPE(*CHAR) LEN(512)
+             DCL        VAR(&FIXDCMD) TYPE(*CHAR) LEN(512)
+
+
+/*      Compile sources into modules.                                         */
+
+             CHGVAR     VAR(&FIXDCMD) VALUE('CRTCMOD' *BCAT &CFLAGS *BCAT      +
+                        'SYSIFCOPT(*IFS64IO)' *BCAT                            +
+                        'DEFINE(''_LARGEFILE64_SOURCE''' *BCAT                 +
+                        '''_LFS64_LARGEFILE=1'') TGTRLS(' *TCAT &TGTRLS *TCAT  +
+                        ') SRCFILE(' *TCAT &SRCLIB *TCAT '/' *TCAT             +
+                        &SRCFILE *TCAT ') MODULE(' *TCAT &MODLIB *TCAT '/')
+
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'ADLER32)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'COMPRESS)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'CRC32)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'DEFLATE)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZCLOSE)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZLIB)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZREAD)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'GZWRITE)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFBACK)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFFAST)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFLATE)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'INFTREES)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'TREES)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'UNCOMPR)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+             CHGVAR     VAR(&CMD) VALUE(&FIXDCMD *TCAT 'ZUTIL)')
+             CALL       PGM(QCMDEXC) PARM(&CMD &CMDLEN)
+
+
+/*      Link modules into a service program.                                  */
+
+             CRTSRVPGM  SRVPGM(&SRVLIB/ZLIB) +
+                          MODULE(&MODLIB/ADLER32     &MODLIB/COMPRESS    +
+                                 &MODLIB/CRC32       &MODLIB/DEFLATE     +
+                                 &MODLIB/GZCLOSE     &MODLIB/GZLIB       +
+                                 &MODLIB/GZREAD      &MODLIB/GZWRITE     +
+                                 &MODLIB/INFBACK     &MODLIB/INFFAST     +
+                                 &MODLIB/INFLATE     &MODLIB/INFTREES    +
+                                 &MODLIB/TREES       &MODLIB/UNCOMPR     +
+                                 &MODLIB/ZUTIL)                          +
+                          SRCFILE(&SRCLIB/&CTLFILE) SRCMBR(BNDSRC)       +
+                          TEXT('ZLIB 1.2.7.1') TGTRLS(&TGTRLS)
+
+             ENDPGM

as400/readme.txt

@@ -0,0 +1,115 @@
+        ZLIB version 1.2.7.1 for AS400 installation instructions
+
+I) From an AS400 *SAVF file:
+
+1)      Unpacking archive to an AS400 save file
+
+On the AS400:
+
+_       Create the ZLIB AS400 library:
+
+        CRTLIB LIB(ZLIB) TYPE(*PROD) TEXT('ZLIB compression API library')
+
+_       Create a work save file, for example:
+
+                CRTSAVF FILE(ZLIB/ZLIBSAVF)
+
+On a PC connected to the target AS400:
+
+_       Unpack the save file image to a PC file "ZLIBSAVF"
+_       Upload this file into the save file on the AS400, for example
+                using ftp in BINARY mode.
+
+
+2)      Populating the ZLIB AS400 source library
+
+On the AS400:
+
+_       Extract the saved objects into the ZLIB AS400 library using:
+
+RSTOBJ OBJ(*ALL) SAVLIB(ZLIB) DEV(*SAVF) SAVF(ZLIB/ZLIBSAVF) RSTLIB(ZLIB)
+
+
+3)      Customize installation:
+
+_       Edit CL member ZLIB/TOOLS(COMPILE) and change parameters if needed,
+                according to the comments.
+
+_       Compile this member with:
+
+        CRTCLPGM PGM(ZLIB/COMPILE) SRCFILE(ZLIB/TOOLS) SRCMBR(COMPILE)
+
+
+4)      Compile and generate the service program:
+
+_       This can now be done by executing:
+
+        CALL PGM(ZLIB/COMPILE)
+
+
+
+II) From the original source distribution:
+
+1)      On the AS400, create the source library:
+
+        CRTLIB LIB(ZLIB) TYPE(*PROD) TEXT('ZLIB compression API library')
+
+2)      Create the source files:
+
+        CRTSRCPF FILE(ZLIB/SOURCES) RCDLEN(112) TEXT('ZLIB library modules')
+        CRTSRCPF FILE(ZLIB/H)       RCDLEN(112) TEXT('ZLIB library includes')
+        CRTSRCPF FILE(ZLIB/TOOLS)   RCDLEN(112) TEXT('ZLIB library control utilities')
+
+3)      From the machine hosting the distribution files, upload them (with
+                FTP in text mode, for example) according to the following table:
+
+    Original    AS400   AS400    AS400 AS400
+    file        file    member   type  description
+                SOURCES                Original ZLIB C subprogram sources
+    adler32.c           ADLER32  C     ZLIB - Compute the Adler-32 checksum of a dta strm
+    compress.c          COMPRESS C     ZLIB - Compress a memory buffer
+    crc32.c             CRC32    C     ZLIB - Compute the CRC-32 of a data stream
+    deflate.c           DEFLATE  C     ZLIB - Compress data using the deflation algorithm
+    gzclose.c           GZCLOSE  C     ZLIB - Close .gz files
+    gzlib.c             GZLIB    C     ZLIB - Miscellaneous .gz files IO support
+    gzread.c            GZREAD   C     ZLIB - Read .gz files
+    gzwrite.c           GZWRITE  C     ZLIB - Write .gz files
+    infback.c           INFBACK  C     ZLIB - Inflate using a callback interface
+    inffast.c           INFFAST  C     ZLIB - Fast proc. literals & length/distance pairs
+    inflate.c           INFLATE  C     ZLIB - Interface to inflate modules
+    inftrees.c          INFTREES C     ZLIB - Generate Huffman trees for efficient decode
+    trees.c             TREES    C     ZLIB - Output deflated data using Huffman coding
+    uncompr.c           UNCOMPR  C     ZLIB - Decompress a memory buffer
+    zutil.c             ZUTIL    C     ZLIB - Target dependent utility functions
+                H                      Original ZLIB C and ILE/RPG include files
+    crc32.h             CRC32    C     ZLIB - CRC32 tables
+    deflate.h           DEFLATE  C     ZLIB - Internal compression state
+    gzguts.h            GZGUTS   C     ZLIB - Definitions for the gzclose module
+    inffast.h           INFFAST  C     ZLIB - Header to use inffast.c
+    inffixed.h          INFFIXED C     ZLIB - Table for decoding fixed codes
+    inflate.h           INFLATE  C     ZLIB - Internal inflate state definitions
+    inftrees.h          INFTREES C     ZLIB - Header to use inftrees.c
+    trees.h             TREES    C     ZLIB - Created automatically with -DGEN_TREES_H
+    zconf.h             ZCONF    C     ZLIB - Compression library configuration
+    zlib.h              ZLIB     C     ZLIB - Compression library C user interface
+    as400/zlib.inc      ZLIB.INC RPGLE ZLIB - Compression library ILE RPG user interface
+    zutil.h             ZUTIL    C     ZLIB - Internal interface and configuration
+                TOOLS                  Building source software & AS/400 README
+    as400/bndsrc        BNDSRC         Entry point exportation list
+    as400/compile.clp   COMPILE  CLP   Compile sources & generate service program
+    as400/readme.txt    README   TXT   Installation instructions
+
+4)      Continue as in I)3).
+
+
+
+
+Notes:  For AS400 ILE RPG programmers, a /copy member defining the ZLIB
+                API prototypes for ILE RPG can be found in ZLIB/H(ZLIB.INC).
+                Please read comments in this member for more information.
+
+        Remember that most foreign textual data are ASCII coded: this
+                implementation does not handle conversion from/to ASCII, so
+                text data code conversions must be done explicitely.
+
+        Mainly for the reason above, always open zipped files in binary mode.

as400/zlib.inc

@@ -0,0 +1,451 @@
+      *  ZLIB.INC - Interface to the general purpose compression library
+      *
+      *  ILE RPG400 version by Patrick Monnerat, DATASPHERE.
+      *  Version 1.2.7.1
+      *
+      *
+      *  WARNING:
+      *     Procedures inflateInit(), inflateInit2(), deflateInit(),
+      *         deflateInit2() and inflateBackInit() need to be called with
+      *         two additional arguments:
+      *         the package version string and the stream control structure.
+      *         size. This is needed because RPG lacks some macro feature.
+      *         Call these procedures as:
+      *             inflateInit(...: ZLIB_VERSION: %size(z_stream))
+      *
+      /if not defined(ZLIB_H_)
+      /define ZLIB_H_
+      *
+      **************************************************************************
+      *                               Constants
+      **************************************************************************
+      *
+      *  Versioning information.
+      *
+     D ZLIB_VERSION    C                   '1.2.7.1'
+     D ZLIB_VERNUM     C                   X'1271'
+     D ZLIB_VER_MAJOR  C                   1
+     D ZLIB_VER_MINOR  C                   2
+     D ZLIB_VER_REVISION...
+     D                 C                   7
+     D ZLIB_VER_SUBREVISION...
+     D                 C                   1
+      *
+      *  Other equates.
+      *
+     D Z_NO_FLUSH      C                   0
+     D Z_PARTIAL_FLUSH...
+     D                 C                   1
+     D Z_SYNC_FLUSH    C                   2
+     D Z_FULL_FLUSH    C                   3
+     D Z_FINISH        C                   4
+     D Z_BLOCK         C                   5
+     D Z_TREES         C                   6
+      *
+     D Z_OK            C                   0
+     D Z_STREAM_END    C                   1
+     D Z_NEED_DICT     C                   2
+     D Z_ERRNO         C                   -1
+     D Z_STREAM_ERROR  C                   -2
+     D Z_DATA_ERROR    C                   -3
+     D Z_MEM_ERROR     C                   -4
+     D Z_BUF_ERROR     C                   -5
+     DZ_VERSION_ERROR  C                   -6
+      *
+     D Z_NO_COMPRESSION...
+     D                 C                   0
+     D Z_BEST_SPEED    C                   1
+     D Z_BEST_COMPRESSION...
+     D                 C                   9
+     D Z_DEFAULT_COMPRESSION...
+     D                 C                   -1
+      *
+     D Z_FILTERED      C                   1
+     D Z_HUFFMAN_ONLY  C                   2
+     D Z_RLE           C                   3
+     D Z_DEFAULT_STRATEGY...
+     D                 C                   0
+      *
+     D Z_BINARY        C                   0
+     D Z_ASCII         C                   1
+     D Z_UNKNOWN       C                   2
+      *
+     D Z_DEFLATED      C                   8
+      *
+     D Z_NULL          C                   0
+      *
+      **************************************************************************
+      *                                 Types
+      **************************************************************************
+      *
+     D z_streamp       S               *                                        Stream struct ptr
+     D gzFile          S               *                                        File pointer
+     D z_off_t         S             10i 0                                      Stream offsets
+     D z_off64_t       S             20i 0                                      Stream offsets
+      *
+      **************************************************************************
+      *                               Structures
+      **************************************************************************
+      *
+      *  The GZIP encode/decode stream support structure.
+      *
+     D z_stream        DS                  align based(z_streamp)
+     D  zs_next_in                     *                                        Next input byte
+     D  zs_avail_in                  10U 0                                      Byte cnt at next_in
+     D  zs_total_in                  10U 0                                      Total bytes read
+     D  zs_next_out                    *                                        Output buffer ptr
+     D  zs_avail_out                 10U 0                                      Room left @ next_out
+     D  zs_total_out                 10U 0                                      Total bytes written
+     D  zs_msg                         *                                        Last errmsg or null
+     D  zs_state                       *                                        Internal state
+     D  zs_zalloc                      *   procptr                              Int. state allocator
+     D  zs_free                        *   procptr                              Int. state dealloc.
+     D  zs_opaque                      *                                        Private alloc. data
+     D  zs_data_type                 10i 0                                      ASC/BIN best guess
+     D  zs_adler                     10u 0                                      Uncompr. adler32 val
+     D                               10U 0                                      Reserved
+     D                               10U 0                                      Ptr. alignment
+      *
+      **************************************************************************
+      *                     Utility function prototypes
+      **************************************************************************
+      *
+     D compress        PR            10I 0 extproc('compress')
+     D  dest                      65535    options(*varsize)                    Destination buffer
+     D  destLen                      10U 0                                      Destination length
+     D  source                    65535    const options(*varsize)              Source buffer
+     D  sourceLen                    10u 0 value                                Source length
+      *
+     D compress2       PR            10I 0 extproc('compress2')
+     D  dest                      65535    options(*varsize)                    Destination buffer
+     D  destLen                      10U 0                                      Destination length
+     D  source                    65535    const options(*varsize)              Source buffer
+     D  sourceLen                    10U 0 value                                Source length
+     D  level                        10I 0 value                                Compression level
+      *
+     D compressBound   PR            10U 0 extproc('compressBound')
+     D  sourceLen                    10U 0 value
+      *
+     D uncompress      PR            10I 0 extproc('uncompress')
+     D  dest                      65535    options(*varsize)                    Destination buffer
+     D  destLen                      10U 0                                      Destination length
+     D  source                    65535    const options(*varsize)              Source buffer
+     D  sourceLen                    10U 0 value                                Source length
+      *
+      /if not defined(LARGE_FILES)
+     D gzopen          PR                  extproc('gzopen')
+     D                                     like(gzFile)
+     D  path                           *   value options(*string)               File pathname
+     D  mode                           *   value options(*string)               Open mode
+      /else
+     D gzopen          PR                  extproc('gzopen64')
+     D                                     like(gzFile)
+     D  path                           *   value options(*string)               File pathname
+     D  mode                           *   value options(*string)               Open mode
+      *
+     D gzopen64        PR                  extproc('gzopen64')
+     D                                     like(gzFile)
+     D  path                           *   value options(*string)               File pathname
+     D  mode                           *   value options(*string)               Open mode
+      /endif
+      *
+     D gzdopen         PR                  extproc('gzdopen')
+     D                                     like(gzFile)
+     D  fd                           10I 0 value                                File descriptor
+     D  mode                           *   value options(*string)               Open mode
+      *
+     D gzbuffer        PR            10I 0 extproc('gzbuffer')
+     D  file                               value like(gzFile)                   File pointer
+     D  size                         10U 0 value
+      *
+     D gzsetparams     PR            10I 0 extproc('gzsetparams')
+     D  file                               value like(gzFile)                   File pointer
+     D  level                        10I 0 value
+     D  strategy                     10I 0 value
+      *
+     D gzread          PR            10I 0 extproc('gzread')
+     D  file                               value like(gzFile)                   File pointer
+     D  buf                       65535    options(*varsize)                    Buffer
+     D  len                          10u 0 value                                Buffer length
+      *
+     D gzwrite         PR            10I 0 extproc('gzwrite')
+     D  file                               value like(gzFile)                   File pointer
+     D  buf                       65535    const options(*varsize)              Buffer
+     D  len                          10u 0 value                                Buffer length
+      *
+     D gzputs          PR            10I 0 extproc('gzputs')
+     D  file                               value like(gzFile)                   File pointer
+     D  s                              *   value options(*string)               String to output
+      *
+     D gzgets          PR              *   extproc('gzgets')
+     D  file                               value like(gzFile)                   File pointer
+     D  buf                       65535    options(*varsize)                    Read buffer
+     D  len                          10i 0 value                                Buffer length
+      *
+     D gzputc          PR            10i 0 extproc('gzputc')
+     D  file                               value like(gzFile)                   File pointer
+     D  c                            10I 0 value                                Character to write
+      *
+     D gzgetc          PR            10i 0 extproc('gzgetc')
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gzgetc_         PR            10i 0 extproc('gzgetc_')
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gzungetc        PR            10i 0 extproc('gzungetc')
+     D  c                            10I 0 value                                Character to push
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gzflush         PR            10i 0 extproc('gzflush')
+     D  file                               value like(gzFile)                   File pointer
+     D  flush                        10I 0 value                                Type of flush
+      *
+      /if not defined(LARGE_FILES)
+     D gzseek          PR                  extproc('gzseek')
+     D                                     like(z_off_t)
+     D  file                               value like(gzFile)                   File pointer
+     D  offset                             value like(z_off_t)                  Offset
+     D  whence                       10i 0 value                                Origin
+      /else
+     D gzseek          PR                  extproc('gzseek64')
+     D                                     like(z_off_t)
+     D  file                               value like(gzFile)                   File pointer
+     D  offset                             value like(z_off_t)                  Offset
+     D  whence                       10i 0 value                                Origin
+      *
+     D gzseek64        PR                  extproc('gzseek64')
+     D                                     like(z_off64_t)
+     D  file                               value like(gzFile)                   File pointer
+     D  offset                             value like(z_off64_t)                Offset
+     D  whence                       10i 0 value                                Origin
+      /endif
+      *
+     D gzrewind        PR            10i 0 extproc('gzrewind')
+     D  file                               value like(gzFile)                   File pointer
+      *
+      /if not defined(LARGE_FILES)
+     D gztell          PR                  extproc('gztell')
+     D                                     like(z_off_t)
+     D  file                               value like(gzFile)                   File pointer
+      /else
+     D gztell          PR                  extproc('gztell64')
+     D                                     like(z_off_t)
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gztell64        PR                  extproc('gztell64')
+     D                                     like(z_off64_t)
+     D  file                               value like(gzFile)                   File pointer
+      /endif
+      *
+      /if not defined(LARGE_FILES)
+     D gzoffset        PR                  extproc('gzoffset')
+     D                                     like(z_off_t)
+     D  file                               value like(gzFile)                   File pointer
+      /else
+     D gzoffset        PR                  extproc('gzoffset64')
+     D                                     like(z_off_t)
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gzoffset64      PR                  extproc('gzoffset64')
+     D                                     like(z_off64_t)
+     D  file                               value like(gzFile)                   File pointer
+      /endif
+      *
+     D gzeof           PR            10i 0 extproc('gzeof')
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gzclose_r       PR            10i 0 extproc('gzclose_r')
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gzclose_w       PR            10i 0 extproc('gzclose_w')
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gzclose         PR            10i 0 extproc('gzclose')
+     D  file                               value like(gzFile)                   File pointer
+      *
+     D gzerror         PR              *   extproc('gzerror')                   Error string
+     D  file                               value like(gzFile)                   File pointer
+     D  errnum                       10I 0                                      Error code
+      *
+     D gzclearerr      PR                  extproc('gzclearerr')
+     D  file                               value like(gzFile)                   File pointer
+      *
+      **************************************************************************
+      *                        Basic function prototypes
+      **************************************************************************
+      *
+     D zlibVersion     PR              *   extproc('zlibVersion')               Version string
+      *
+     D deflateInit     PR            10I 0 extproc('deflateInit_')              Init. compression
+     D  strm                               like(z_stream)                       Compression stream
+     D  level                        10I 0 value                                Compression level
+     D  version                        *   value options(*string)               Version string
+     D  stream_size                  10i 0 value                                Stream struct. size
+      *
+     D deflate         PR            10I 0 extproc('deflate')                   Compress data
+     D  strm                               like(z_stream)                       Compression stream
+     D  flush                        10I 0 value                                Flush type required
+      *
+     D deflateEnd      PR            10I 0 extproc('deflateEnd')                Termin. compression
+     D  strm                               like(z_stream)                       Compression stream
+      *
+     D inflateInit     PR            10I 0 extproc('inflateInit_')              Init. expansion
+     D  strm                               like(z_stream)                       Expansion stream
+     D  version                        *   value options(*string)               Version string
+     D  stream_size                  10i 0 value                                Stream struct. size
+      *
+     D inflate         PR            10I 0 extproc('inflate')                   Expand data
+     D  strm                               like(z_stream)                       Expansion stream
+     D  flush                        10I 0 value                                Flush type required
+      *
+     D inflateEnd      PR            10I 0 extproc('inflateEnd')                Termin. expansion
+     D  strm                               like(z_stream)                       Expansion stream
+      *
+      **************************************************************************
+      *                        Advanced function prototypes
+      **************************************************************************
+      *
+     D deflateInit2    PR            10I 0 extproc('deflateInit2_')             Init. compression
+     D  strm                               like(z_stream)                       Compression stream
+     D  level                        10I 0 value                                Compression level
+     D  method                       10I 0 value                                Compression method
+     D  windowBits                   10I 0 value                                log2(window size)
+     D  memLevel                     10I 0 value                                Mem/cmpress tradeoff
+     D  strategy                     10I 0 value                                Compression stategy
+     D  version                        *   value options(*string)               Version string
+     D  stream_size                  10i 0 value                                Stream struct. size
+      *
+     D deflateSetDictionary...
+     D                 PR            10I 0 extproc('deflateSetDictionary')      Init. dictionary
+     D  strm                               like(z_stream)                       Compression stream
+     D  dictionary                65535    const options(*varsize)              Dictionary bytes
+     D  dictLength                   10U 0 value                                Dictionary length
+      *
+     D deflateCopy     PR            10I 0 extproc('deflateCopy')               Compress strm 2 strm
+     D  dest                               like(z_stream)                       Destination stream
+     D  source                             like(z_stream)                       Source stream
+      *
+     D deflateReset    PR            10I 0 extproc('deflateReset')              End and init. stream
+     D  strm                               like(z_stream)                       Compression stream
+      *
+     D deflateParams   PR            10I 0 extproc('deflateParams')             Change level & strat
+     D  strm                               like(z_stream)                       Compression stream
+     D  level                        10I 0 value                                Compression level
+     D  strategy                     10I 0 value                                Compression stategy
+      *
+     D deflateBound    PR            10U 0 extproc('deflateBound')              Change level & strat
+     D  strm                               like(z_stream)                       Compression stream
+     D  sourcelen                    10U 0 value                                Compression level
+      *
+     D deflatePending  PR            10I 0 extproc('deflatePending')            Change level & strat
+     D  strm                               like(z_stream)                       Compression stream
+     D  pending                      10U 0                                      Pending bytes
+     D  bits                         10I 0                                      Pending bits
+      *
+     D deflatePrime    PR            10I 0 extproc('deflatePrime')              Change level & strat
+     D  strm                               like(z_stream)                       Compression stream
+     D  bits                         10I 0 value                                # of bits to insert
+     D  value                        10I 0 value                                Bits to insert
+      *
+     D inflateInit2    PR            10I 0 extproc('inflateInit2_')             Init. expansion
+     D  strm                               like(z_stream)                       Expansion stream
+     D  windowBits                   10I 0 value                                log2(window size)
+     D  version                        *   value options(*string)               Version string
+     D  stream_size                  10i 0 value                                Stream struct. size
+      *
+     D inflateSetDictionary...
+     D                 PR            10I 0 extproc('inflateSetDictionary')      Init. dictionary
+     D  strm                               like(z_stream)                       Expansion stream
+     D  dictionary                65535    const options(*varsize)              Dictionary bytes
+     D  dictLength                   10U 0 value                                Dictionary length
+      *
+     D inflateGetDictionary...
+     D                 PR            10I 0 extproc('inflateGetDictionary')      Get dictionary
+     D  strm                               like(z_stream)                       Expansion stream
+     D  dictionary                65535    options(*varsize)                    Dictionary bytes
+     D  dictLength                   10U 0                                      Dictionary length
+      *
+     D inflateSync     PR            10I 0 extproc('inflateSync')               Sync. expansion
+     D  strm                               like(z_stream)                       Expansion stream
+      *
+     D inflateCopy     PR            10I 0 extproc('inflateCopy')
+     D  dest                               like(z_stream)                       Destination stream
+     D  source                             like(z_stream)                       Source stream
+      *
+     D inflateReset    PR            10I 0 extproc('inflateReset')              End and init. stream
+     D  strm                               like(z_stream)                       Expansion stream
+      *
+     D inflateReset2   PR            10I 0 extproc('inflateReset2')             End and init. stream
+     D  strm                               like(z_stream)                       Expansion stream
+     D  windowBits                   10I 0 value                                Log2(buffer size)
+      *
+     D inflatePrime    PR            10I 0 extproc('inflatePrime')              Insert bits
+     D  strm                               like(z_stream)                       Expansion stream
+     D  bits                         10I 0 value                                Bit count
+     D  value                        10I 0 value                                Bits to insert
+      *
+     D inflateMark     PR            10I 0 extproc('inflateMark')               Get inflate info
+     D  strm                               like(z_stream)                       Expansion stream
+      *
+     D inflateBackInit...
+     D                 PR            10I 0 extproc('inflateBackInit_')
+     D  strm                               like(z_stream)                       Expansion stream
+     D  windowBits                   10I 0 value                                Log2(buffer size)
+     D  window                    65535    options(*varsize)                    Buffer
+     D  version                        *   value options(*string)               Version string
+     D  stream_size                  10i 0 value                                Stream struct. size
+      *
+     D inflateBack     PR            10I 0 extproc('inflateBack')
+     D  strm                               like(z_stream)                       Expansion stream
+     D  in                             *   value procptr                        Input function
+     D  in_desc                        *   value                                Input descriptor
+     D  out                            *   value procptr                        Output function
+     D  out_desc                       *   value                                Output descriptor
+      *
+     D inflateBackEnd  PR            10I 0 extproc('inflateBackEnd')
+     D  strm                               like(z_stream)                       Expansion stream
+      *
+     D zlibCompileFlags...
+     D                 PR            10U 0 extproc('zlibCompileFlags')
+      *
+      **************************************************************************
+      *                        Checksum function prototypes
+      **************************************************************************
+      *
+     D adler32         PR            10U 0 extproc('adler32')                   New checksum
+     D  adler                        10U 0 value                                Old checksum
+     D  buf                       65535    const options(*varsize)              Bytes to accumulate
+     D  len                          10U 0 value                                Buffer length
+      *
+     D crc32           PR            10U 0 extproc('crc32')                     New checksum
+     D  crc                          10U 0 value                                Old checksum
+     D  buf                       65535    const options(*varsize)              Bytes to accumulate
+     D  len                          10U 0 value                                Buffer length
+      *
+      **************************************************************************
+      *                     Miscellaneous function prototypes
+      **************************************************************************
+      *
+     D zError          PR              *   extproc('zError')                    Error string
+     D  err                          10I 0 value                                Error code
+      *
+     D inflateSyncPoint...
+     D                 PR            10I 0 extproc('inflateSyncPoint')
+     D  strm                               like(z_stream)                       Expansion stream
+      *
+     D get_crc_table   PR              *   extproc('get_crc_table')             Ptr to ulongs
+      *
+     D inflateUndermine...
+     D                 PR            10I 0 extproc('inflateUndermine')
+     D  strm                               like(z_stream)                       Expansion stream
+     D  arg                          10I 0 value                                Error code
+      *
+     D inflateResetKeep...
+     D                 PR            10I 0 extproc('inflateResetKeep')          End and init. stream
+     D  strm                               like(z_stream)                       Expansion stream
+      *
+     D deflateResetKeep...
+     D                 PR            10I 0 extproc('deflateResetKeep')          End and init. stream
+     D  strm                               like(z_stream)                       Expansion stream
+      *
+      /endif

compress.c

@@ -1,5 +1,5 @@
 /* compress.c -- compress a memory buffer
- * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -29,7 +29,7 @@ int ZEXPORT compress2 (dest, destLen, source, sourceLen, level)
     z_stream stream;
     int err;
 
-    stream.next_in = (Bytef*)source;
+    stream.next_in = (z_const Bytef *)source;
     stream.avail_in = (uInt)sourceLen;
 #ifdef MAXSEG_64K
     /* Check for source > 64K on 16-bit machine: */
@@ -75,5 +75,6 @@ int ZEXPORT compress (dest, destLen, source, sourceLen)
 uLong ZEXPORT compressBound (sourceLen)
     uLong sourceLen;
 {
-    return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) + 11;
+    return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
+           (sourceLen >> 25) + 13;
 }

contrib/README.contrib

@@ -4,44 +4,75 @@ Use at your own risk. Please contact the authors of the contributions
 for help about these, not the zlib authors. Thanks.
 
 
-asm386/     by Gilles Vollant <info@winimage.com>
-	386 asm code replacing longest_match(), for Visual C++ 4.2 and ML 6.11c
+ada/        by Dmitriy Anisimkov <anisimkov@yahoo.com>
+        Support for Ada
+        See http://zlib-ada.sourceforge.net/
 
-asm586/ and asm686/    by Brian Raiter <breadbox@muppetlabs.com> 
-        asm code for Pentium and Pentium Pro
+amd64/      by Mikhail Teterin <mi@ALDAN.algebra.com>
+        asm code for AMD64
+        See patch at http://www.freebsd.org/cgi/query-pr.cgi?pr=bin/96393
+
+asm686/     by Brian Raiter <breadbox@muppetlabs.com>
+        asm code for Pentium and PPro/PII, using the AT&T (GNU as) syntax
         See http://www.muppetlabs.com/~breadbox/software/assembly.html
 
 blast/      by Mark Adler <madler@alumni.caltech.edu>
         Decompressor for output of PKWare Data Compression Library (DCL)
 
-delphi/     by Bob Dellaca <bobdl@xtra.co.nz>
-	Support for Delphi
+delphi/     by Cosmin Truta <cosmint@cs.ubbcluj.ro>
+        Support for Delphi and C++ Builder
 
-delphi2/    by Davide Moretti <dave@rimini.com>
-        Another support for C++Builder and Delphi
+dotzlib/    by Henrik Ravn <henrik@ravn.com>
+        Support for Microsoft .Net and Visual C++ .Net
+
+gcc_gvmat64/by Gilles Vollant <info@winimage.com>
+        GCC Version of x86 64-bit (AMD64 and Intel EM64t) code for x64
+        assembler to replace longest_match() and inflate_fast()
+
+infback9/   by Mark Adler <madler@alumni.caltech.edu>
+        Unsupported diffs to infback to decode the deflate64 format
 
 inflate86/  by Chris Anderson <christop@charm.net>
         Tuned x86 gcc asm code to replace inflate_fast()
 
-minizip/    by Gilles Vollant <info@winimage.com>
-	Mini zip and unzip based on zlib
-        See http://www.winimage.com/zLibDll/unzip.html
-
 iostream/   by Kevin Ruland <kevin@rodin.wustl.edu>
         A C++ I/O streams interface to the zlib gz* functions
 
 iostream2/  by Tyge L<>vset <Tyge.Lovset@cmr.no>
         Another C++ I/O streams interface
 
+iostream3/  by Ludwig Schwardt <schwardt@sun.ac.za>
+            and Kevin Ruland <kevin@rodin.wustl.edu>
+        Yet another C++ I/O streams interface
+
+masmx64/    by Gilles Vollant <info@winimage.com>
+        x86 64-bit (AMD64 and Intel EM64t) code for x64 assembler to
+        replace longest_match() and inflate_fast(),  also masm x86
+        64-bits translation of Chris Anderson inflate_fast()
+
+masmx86/    by Gilles Vollant <info@winimage.com>
+        x86 asm code to replace longest_match() and inflate_fast(),
+        for Visual C++ and MASM (32 bits).
+        Based on Brian Raiter (asm686) and Chris Anderson (inflate86)
+
+minizip/    by Gilles Vollant <info@winimage.com>
+        Mini zip and unzip based on zlib
+        Includes Zip64 support by Mathias Svensson <mathias@result42.com>
+        See http://www.winimage.com/zLibDll/unzip.html
+
+pascal/     by Bob Dellaca <bobdl@xtra.co.nz> et al.
+        Support for Pascal
+
+puff/       by Mark Adler <madler@alumni.caltech.edu>
+        Small, low memory usage inflate.  Also serves to provide an
+        unambiguous description of the deflate format.
+
 testzlib/   by Gilles Vollant <info@winimage.com>
         Example of the use of zlib
 
-untgz/      by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+untgz/      by Pedro A. Aranda Gutierrez <paag@tid.es>
         A very simple tar.gz file extractor using zlib
 
-visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
-        How to use compress(), uncompress() and the gz* functions from VB.
-
 vstudio/    by Gilles Vollant <info@winimage.com>
-	Building zlib DLL with Visual Studio .NET
-	Includes x86 inffast.asm for MASM
+        Building a minizip-enhanced zlib with Microsoft Visual Studio
+        Includes vc11 from kreuzerkrieg and vc12 from davispuh

contrib/ada/buffer_demo.adb

@@ -0,0 +1,106 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2004 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+--
+--  $Id: buffer_demo.adb,v 1.3 2004/09/06 06:55:35 vagul Exp $
+
+--  This demo program provided by Dr Steve Sangwine <sjs@essex.ac.uk>
+--
+--  Demonstration of a problem with Zlib-Ada (already fixed) when a buffer
+--  of exactly the correct size is used for decompressed data, and the last
+--  few bytes passed in to Zlib are checksum bytes.
+
+--  This program compresses a string of text, and then decompresses the
+--  compressed text into a buffer of the same size as the original text.
+
+with Ada.Streams; use Ada.Streams;
+with Ada.Text_IO;
+
+with ZLib; use ZLib;
+
+procedure Buffer_Demo is
+   EOL  : Character renames ASCII.LF;
+   Text : constant String
+     := "Four score and seven years ago our fathers brought forth," & EOL &
+        "upon this continent, a new nation, conceived in liberty," & EOL &
+        "and dedicated to the proposition that `all men are created equal'.";
+
+   Source : Stream_Element_Array (1 .. Text'Length);
+   for Source'Address use Text'Address;
+
+begin
+   Ada.Text_IO.Put (Text);
+   Ada.Text_IO.New_Line;
+   Ada.Text_IO.Put_Line
+     ("Uncompressed size : " & Positive'Image (Text'Length) & " bytes");
+
+   declare
+      Compressed_Data : Stream_Element_Array (1 .. Text'Length);
+      L               : Stream_Element_Offset;
+   begin
+      Compress : declare
+         Compressor : Filter_Type;
+         I : Stream_Element_Offset;
+      begin
+         Deflate_Init (Compressor);
+
+         --  Compress the whole of T at once.
+
+         Translate (Compressor, Source, I, Compressed_Data, L, Finish);
+         pragma Assert (I = Source'Last);
+
+         Close (Compressor);
+
+         Ada.Text_IO.Put_Line
+           ("Compressed size :   "
+            & Stream_Element_Offset'Image (L) & " bytes");
+      end Compress;
+
+      --  Now we decompress the data, passing short blocks of data to Zlib
+      --  (because this demonstrates the problem - the last block passed will
+      --  contain checksum information and there will be no output, only a
+      --  check inside Zlib that the checksum is correct).
+
+      Decompress : declare
+         Decompressor : Filter_Type;
+
+         Uncompressed_Data : Stream_Element_Array (1 .. Text'Length);
+
+         Block_Size : constant := 4;
+         --  This makes sure that the last block contains
+         --  only Adler checksum data.
+
+         P : Stream_Element_Offset := Compressed_Data'First - 1;
+         O : Stream_Element_Offset;
+      begin
+         Inflate_Init (Decompressor);
+
+         loop
+            Translate
+              (Decompressor,
+               Compressed_Data
+                 (P + 1 .. Stream_Element_Offset'Min (P + Block_Size, L)),
+               P,
+               Uncompressed_Data
+                 (Total_Out (Decompressor) + 1 .. Uncompressed_Data'Last),
+               O,
+               No_Flush);
+
+               Ada.Text_IO.Put_Line
+                 ("Total in : " & Count'Image (Total_In (Decompressor)) &
+                  ", out : " & Count'Image (Total_Out (Decompressor)));
+
+               exit when P = L;
+         end loop;
+
+         Ada.Text_IO.New_Line;
+         Ada.Text_IO.Put_Line
+           ("Decompressed text matches original text : "
+             & Boolean'Image (Uncompressed_Data = Source));
+      end Decompress;
+   end;
+end Buffer_Demo;

contrib/ada/mtest.adb

@@ -0,0 +1,156 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+--  Continuous test for ZLib multithreading. If the test would fail
+--  we should provide thread safe allocation routines for the Z_Stream.
+--
+--  $Id: mtest.adb,v 1.4 2004/07/23 07:49:54 vagul Exp $
+
+with ZLib;
+with Ada.Streams;
+with Ada.Numerics.Discrete_Random;
+with Ada.Text_IO;
+with Ada.Exceptions;
+with Ada.Task_Identification;
+
+procedure MTest is
+   use Ada.Streams;
+   use ZLib;
+
+   Stop : Boolean := False;
+
+   pragma Atomic (Stop);
+
+   subtype Visible_Symbols is Stream_Element range 16#20# .. 16#7E#;
+
+   package Random_Elements is
+      new Ada.Numerics.Discrete_Random (Visible_Symbols);
+
+   task type Test_Task;
+
+   task body Test_Task is
+      Buffer : Stream_Element_Array (1 .. 100_000);
+      Gen : Random_Elements.Generator;
+
+      Buffer_First  : Stream_Element_Offset;
+      Compare_First : Stream_Element_Offset;
+
+      Deflate : Filter_Type;
+      Inflate : Filter_Type;
+
+      procedure Further (Item : in Stream_Element_Array);
+
+      procedure Read_Buffer
+        (Item : out Ada.Streams.Stream_Element_Array;
+         Last : out Ada.Streams.Stream_Element_Offset);
+
+      -------------
+      -- Further --
+      -------------
+
+      procedure Further (Item : in Stream_Element_Array) is
+
+         procedure Compare (Item : in Stream_Element_Array);
+
+         -------------
+         -- Compare --
+         -------------
+
+         procedure Compare (Item : in Stream_Element_Array) is
+            Next_First : Stream_Element_Offset := Compare_First + Item'Length;
+         begin
+            if Buffer (Compare_First .. Next_First - 1) /= Item then
+               raise Program_Error;
+            end if;
+
+            Compare_First := Next_First;
+         end Compare;
+
+         procedure Compare_Write is new ZLib.Write (Write => Compare);
+      begin
+         Compare_Write (Inflate, Item, No_Flush);
+      end Further;
+
+      -----------------
+      -- Read_Buffer --
+      -----------------
+
+      procedure Read_Buffer
+        (Item : out Ada.Streams.Stream_Element_Array;
+         Last : out Ada.Streams.Stream_Element_Offset)
+      is
+         Buff_Diff   : Stream_Element_Offset := Buffer'Last - Buffer_First;
+         Next_First : Stream_Element_Offset;
+      begin
+         if Item'Length <= Buff_Diff then
+            Last := Item'Last;
+
+            Next_First := Buffer_First + Item'Length;
+
+            Item := Buffer (Buffer_First .. Next_First - 1);
+
+            Buffer_First := Next_First;
+         else
+            Last := Item'First + Buff_Diff;
+            Item (Item'First .. Last) := Buffer (Buffer_First .. Buffer'Last);
+            Buffer_First := Buffer'Last + 1;
+         end if;
+      end Read_Buffer;
+
+      procedure Translate is new Generic_Translate
+                                   (Data_In  => Read_Buffer,
+                                    Data_Out => Further);
+
+   begin
+      Random_Elements.Reset (Gen);
+
+      Buffer := (others => 20);
+
+      Main : loop
+         for J in Buffer'Range loop
+            Buffer (J) := Random_Elements.Random (Gen);
+
+            Deflate_Init (Deflate);
+            Inflate_Init (Inflate);
+
+            Buffer_First  := Buffer'First;
+            Compare_First := Buffer'First;
+
+            Translate (Deflate);
+
+            if Compare_First /= Buffer'Last + 1 then
+               raise Program_Error;
+            end if;
+
+            Ada.Text_IO.Put_Line
+              (Ada.Task_Identification.Image
+                 (Ada.Task_Identification.Current_Task)
+               & Stream_Element_Offset'Image (J)
+               & ZLib.Count'Image (Total_Out (Deflate)));
+
+            Close (Deflate);
+            Close (Inflate);
+
+            exit Main when Stop;
+         end loop;
+      end loop Main;
+   exception
+      when E : others =>
+         Ada.Text_IO.Put_Line (Ada.Exceptions.Exception_Information (E));
+         Stop := True;
+   end Test_Task;
+
+   Test : array (1 .. 4) of Test_Task;
+
+   pragma Unreferenced (Test);
+
+   Dummy : Character;
+
+begin
+   Ada.Text_IO.Get_Immediate (Dummy);
+   Stop := True;
+end MTest;

contrib/ada/read.adb

@@ -0,0 +1,156 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+
+--  $Id: read.adb,v 1.8 2004/05/31 10:53:40 vagul Exp $
+
+--  Test/demo program for the generic read interface.
+
+with Ada.Numerics.Discrete_Random;
+with Ada.Streams;
+with Ada.Text_IO;
+
+with ZLib;
+
+procedure Read is
+
+   use Ada.Streams;
+
+   ------------------------------------
+   --  Test configuration parameters --
+   ------------------------------------
+
+   File_Size   : Stream_Element_Offset := 100_000;
+
+   Continuous  : constant Boolean          := False;
+   --  If this constant is True, the test would be repeated again and again,
+   --  with increment File_Size for every iteration.
+
+   Header      : constant ZLib.Header_Type := ZLib.Default;
+   --  Do not use Header other than Default in ZLib versions 1.1.4 and older.
+
+   Init_Random : constant := 8;
+   --  We are using the same random sequence, in case of we catch bug,
+   --  so we would be able to reproduce it.
+
+   -- End --
+
+   Pack_Size : Stream_Element_Offset;
+   Offset    : Stream_Element_Offset;
+
+   Filter     : ZLib.Filter_Type;
+
+   subtype Visible_Symbols
+      is Stream_Element range 16#20# .. 16#7E#;
+
+   package Random_Elements is new
+      Ada.Numerics.Discrete_Random (Visible_Symbols);
+
+   Gen : Random_Elements.Generator;
+   Period  : constant Stream_Element_Offset := 200;
+   --  Period constant variable for random generator not to be very random.
+   --  Bigger period, harder random.
+
+   Read_Buffer : Stream_Element_Array (1 .. 2048);
+   Read_First  : Stream_Element_Offset;
+   Read_Last   : Stream_Element_Offset;
+
+   procedure Reset;
+
+   procedure Read
+     (Item : out Stream_Element_Array;
+      Last : out Stream_Element_Offset);
+   --  this procedure is for generic instantiation of
+   --  ZLib.Read
+   --  reading data from the File_In.
+
+   procedure Read is new ZLib.Read
+                           (Read,
+                            Read_Buffer,
+                            Rest_First => Read_First,
+                            Rest_Last  => Read_Last);
+
+   ----------
+   -- Read --
+   ----------
+
+   procedure Read
+     (Item : out Stream_Element_Array;
+      Last : out Stream_Element_Offset) is
+   begin
+      Last := Stream_Element_Offset'Min
+               (Item'Last,
+                Item'First + File_Size - Offset);
+
+      for J in Item'First .. Last loop
+         if J < Item'First + Period then
+            Item (J) := Random_Elements.Random (Gen);
+         else
+            Item (J) := Item (J - Period);
+         end if;
+
+         Offset   := Offset + 1;
+      end loop;
+   end Read;
+
+   -----------
+   -- Reset --
+   -----------
+
+   procedure Reset is
+   begin
+      Random_Elements.Reset (Gen, Init_Random);
+      Pack_Size := 0;
+      Offset := 1;
+      Read_First := Read_Buffer'Last + 1;
+      Read_Last  := Read_Buffer'Last;
+   end Reset;
+
+begin
+   Ada.Text_IO.Put_Line ("ZLib " & ZLib.Version);
+
+   loop
+      for Level in ZLib.Compression_Level'Range loop
+
+         Ada.Text_IO.Put ("Level ="
+            & ZLib.Compression_Level'Image (Level));
+
+         --  Deflate using generic instantiation.
+
+         ZLib.Deflate_Init
+               (Filter,
+                Level,
+                Header => Header);
+
+         Reset;
+
+         Ada.Text_IO.Put
+           (Stream_Element_Offset'Image (File_Size) & " ->");
+
+         loop
+            declare
+               Buffer : Stream_Element_Array (1 .. 1024);
+               Last   : Stream_Element_Offset;
+            begin
+               Read (Filter, Buffer, Last);
+
+               Pack_Size := Pack_Size + Last - Buffer'First + 1;
+
+               exit when Last < Buffer'Last;
+            end;
+         end loop;
+
+         Ada.Text_IO.Put_Line (Stream_Element_Offset'Image (Pack_Size));
+
+         ZLib.Close (Filter);
+      end loop;
+
+      exit when not Continuous;
+
+      File_Size := File_Size + 1;
+   end loop;
+end Read;

contrib/ada/readme.txt

@@ -0,0 +1,65 @@
+                        ZLib for Ada thick binding (ZLib.Ada)
+                        Release 1.3
+
+ZLib.Ada is a thick binding interface to the popular ZLib data
+compression library, available at http://www.gzip.org/zlib/.
+It provides Ada-style access to the ZLib C library.
+
+
+        Here are the main changes since ZLib.Ada 1.2:
+
+- Attension: ZLib.Read generic routine have a initialization requirement
+  for Read_Last parameter now. It is a bit incompartible with previous version,
+  but extends functionality, we could use new parameters Allow_Read_Some and
+  Flush now.
+
+- Added Is_Open routines to ZLib and ZLib.Streams packages.
+
+- Add pragma Assert to check Stream_Element is 8 bit.
+
+- Fix extraction to buffer with exact known decompressed size. Error reported by
+  Steve Sangwine.
+
+- Fix definition of ULong (changed to unsigned_long), fix regression on 64 bits
+  computers. Patch provided by Pascal Obry.
+
+- Add Status_Error exception definition.
+
+- Add pragma Assertion that Ada.Streams.Stream_Element size is 8 bit.
+
+
+        How to build ZLib.Ada under GNAT
+
+You should have the ZLib library already build on your computer, before
+building ZLib.Ada. Make the directory of ZLib.Ada sources current and
+issue the command:
+
+  gnatmake test -largs -L<directory where libz.a is> -lz
+
+Or use the GNAT project file build for GNAT 3.15 or later:
+
+  gnatmake -Pzlib.gpr -L<directory where libz.a is>
+
+
+        How to build ZLib.Ada under Aonix ObjectAda for Win32 7.2.2
+
+1. Make a project with all *.ads and *.adb files from the distribution.
+2. Build the libz.a library from the ZLib C sources.
+3. Rename libz.a to z.lib.
+4. Add the library z.lib to the project.
+5. Add the libc.lib library from the ObjectAda distribution to the project.
+6. Build the executable using test.adb as a main procedure.
+
+
+        How to use ZLib.Ada
+
+The source files test.adb and read.adb are small demo programs that show
+the main functionality of ZLib.Ada.
+
+The routines from the package specifications are commented.
+
+
+Homepage: http://zlib-ada.sourceforge.net/
+Author: Dmitriy Anisimkov <anisimkov@yahoo.com>
+
+Contributors: Pascal Obry <pascal@obry.org>, Steve Sangwine <sjs@essex.ac.uk>

contrib/ada/test.adb

@@ -0,0 +1,463 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+
+--  $Id: test.adb,v 1.17 2003/08/12 12:13:30 vagul Exp $
+
+--  The program has a few aims.
+--  1. Test ZLib.Ada95 thick binding functionality.
+--  2. Show the example of use main functionality of the ZLib.Ada95 binding.
+--  3. Build this program automatically compile all ZLib.Ada95 packages under
+--     GNAT Ada95 compiler.
+
+with ZLib.Streams;
+with Ada.Streams.Stream_IO;
+with Ada.Numerics.Discrete_Random;
+
+with Ada.Text_IO;
+
+with Ada.Calendar;
+
+procedure Test is
+
+   use Ada.Streams;
+   use Stream_IO;
+
+   ------------------------------------
+   --  Test configuration parameters --
+   ------------------------------------
+
+   File_Size   : Count   := 100_000;
+   Continuous  : constant Boolean := False;
+
+   Header      : constant ZLib.Header_Type := ZLib.Default;
+                                              --  ZLib.None;
+                                              --  ZLib.Auto;
+                                              --  ZLib.GZip;
+   --  Do not use Header other then Default in ZLib versions 1.1.4
+   --  and older.
+
+   Strategy    : constant ZLib.Strategy_Type := ZLib.Default_Strategy;
+   Init_Random : constant := 10;
+
+   -- End --
+
+   In_File_Name  : constant String := "testzlib.in";
+   --  Name of the input file
+
+   Z_File_Name   : constant String := "testzlib.zlb";
+   --  Name of the compressed file.
+
+   Out_File_Name : constant String := "testzlib.out";
+   --  Name of the decompressed file.
+
+   File_In   : File_Type;
+   File_Out  : File_Type;
+   File_Back : File_Type;
+   File_Z    : ZLib.Streams.Stream_Type;
+
+   Filter : ZLib.Filter_Type;
+
+   Time_Stamp : Ada.Calendar.Time;
+
+   procedure Generate_File;
+   --  Generate file of spetsified size with some random data.
+   --  The random data is repeatable, for the good compression.
+
+   procedure Compare_Streams
+     (Left, Right : in out Root_Stream_Type'Class);
+   --  The procedure compearing data in 2 streams.
+   --  It is for compare data before and after compression/decompression.
+
+   procedure Compare_Files (Left, Right : String);
+   --  Compare files. Based on the Compare_Streams.
+
+   procedure Copy_Streams
+     (Source, Target : in out Root_Stream_Type'Class;
+      Buffer_Size    : in     Stream_Element_Offset := 1024);
+   --  Copying data from one stream to another. It is for test stream
+   --  interface of the library.
+
+   procedure Data_In
+     (Item : out Stream_Element_Array;
+      Last : out Stream_Element_Offset);
+   --  this procedure is for generic instantiation of
+   --  ZLib.Generic_Translate.
+   --  reading data from the File_In.
+
+   procedure Data_Out (Item : in Stream_Element_Array);
+   --  this procedure is for generic instantiation of
+   --  ZLib.Generic_Translate.
+   --  writing data to the File_Out.
+
+   procedure Stamp;
+   --  Store the timestamp to the local variable.
+
+   procedure Print_Statistic (Msg : String; Data_Size : ZLib.Count);
+   --  Print the time statistic with the message.
+
+   procedure Translate is new ZLib.Generic_Translate
+                                (Data_In  => Data_In,
+                                 Data_Out => Data_Out);
+   --  This procedure is moving data from File_In to File_Out
+   --  with compression or decompression, depend on initialization of
+   --  Filter parameter.
+
+   -------------------
+   -- Compare_Files --
+   -------------------
+
+   procedure Compare_Files (Left, Right : String) is
+      Left_File, Right_File : File_Type;
+   begin
+      Open (Left_File, In_File, Left);
+      Open (Right_File, In_File, Right);
+      Compare_Streams (Stream (Left_File).all, Stream (Right_File).all);
+      Close (Left_File);
+      Close (Right_File);
+   end Compare_Files;
+
+   ---------------------
+   -- Compare_Streams --
+   ---------------------
+
+   procedure Compare_Streams
+     (Left, Right : in out Ada.Streams.Root_Stream_Type'Class)
+   is
+      Left_Buffer, Right_Buffer : Stream_Element_Array (0 .. 16#FFF#);
+      Left_Last, Right_Last : Stream_Element_Offset;
+   begin
+      loop
+         Read (Left, Left_Buffer, Left_Last);
+         Read (Right, Right_Buffer, Right_Last);
+
+         if Left_Last /= Right_Last then
+            Ada.Text_IO.Put_Line ("Compare error :"
+              & Stream_Element_Offset'Image (Left_Last)
+              & " /= "
+              & Stream_Element_Offset'Image (Right_Last));
+
+            raise Constraint_Error;
+
+         elsif Left_Buffer (0 .. Left_Last)
+               /= Right_Buffer (0 .. Right_Last)
+         then
+            Ada.Text_IO.Put_Line ("ERROR: IN and OUT files is not equal.");
+            raise Constraint_Error;
+
+         end if;
+
+         exit when Left_Last < Left_Buffer'Last;
+      end loop;
+   end Compare_Streams;
+
+   ------------------
+   -- Copy_Streams --
+   ------------------
+
+   procedure Copy_Streams
+     (Source, Target : in out Ada.Streams.Root_Stream_Type'Class;
+      Buffer_Size    : in     Stream_Element_Offset := 1024)
+   is
+      Buffer : Stream_Element_Array (1 .. Buffer_Size);
+      Last   : Stream_Element_Offset;
+   begin
+      loop
+         Read  (Source, Buffer, Last);
+         Write (Target, Buffer (1 .. Last));
+
+         exit when Last < Buffer'Last;
+      end loop;
+   end Copy_Streams;
+
+   -------------
+   -- Data_In --
+   -------------
+
+   procedure Data_In
+     (Item : out Stream_Element_Array;
+      Last : out Stream_Element_Offset) is
+   begin
+      Read (File_In, Item, Last);
+   end Data_In;
+
+   --------------
+   -- Data_Out --
+   --------------
+
+   procedure Data_Out (Item : in Stream_Element_Array) is
+   begin
+      Write (File_Out, Item);
+   end Data_Out;
+
+   -------------------
+   -- Generate_File --
+   -------------------
+
+   procedure Generate_File is
+      subtype Visible_Symbols is Stream_Element range 16#20# .. 16#7E#;
+
+      package Random_Elements is
+         new Ada.Numerics.Discrete_Random (Visible_Symbols);
+
+      Gen    : Random_Elements.Generator;
+      Buffer : Stream_Element_Array := (1 .. 77 => 16#20#) & 10;
+
+      Buffer_Count : constant Count := File_Size / Buffer'Length;
+      --  Number of same buffers in the packet.
+
+      Density : constant Count := 30; --  from 0 to Buffer'Length - 2;
+
+      procedure Fill_Buffer (J, D : in Count);
+      --  Change the part of the buffer.
+
+      -----------------
+      -- Fill_Buffer --
+      -----------------
+
+      procedure Fill_Buffer (J, D : in Count) is
+      begin
+         for K in 0 .. D loop
+            Buffer
+              (Stream_Element_Offset ((J + K) mod (Buffer'Length - 1) + 1))
+             := Random_Elements.Random (Gen);
+
+         end loop;
+      end Fill_Buffer;
+
+   begin
+      Random_Elements.Reset (Gen, Init_Random);
+
+      Create (File_In, Out_File, In_File_Name);
+
+      Fill_Buffer (1, Buffer'Length - 2);
+
+      for J in 1 .. Buffer_Count loop
+         Write (File_In, Buffer);
+
+         Fill_Buffer (J, Density);
+      end loop;
+
+      --  fill remain size.
+
+      Write
+        (File_In,
+         Buffer
+           (1 .. Stream_Element_Offset
+                   (File_Size - Buffer'Length * Buffer_Count)));
+
+      Flush (File_In);
+      Close (File_In);
+   end Generate_File;
+
+   ---------------------
+   -- Print_Statistic --
+   ---------------------
+
+   procedure Print_Statistic (Msg : String; Data_Size : ZLib.Count) is
+      use Ada.Calendar;
+      use Ada.Text_IO;
+
+      package Count_IO is new Integer_IO (ZLib.Count);
+
+      Curr_Dur : Duration := Clock - Time_Stamp;
+   begin
+      Put (Msg);
+
+      Set_Col (20);
+      Ada.Text_IO.Put ("size =");
+
+      Count_IO.Put
+        (Data_Size,
+         Width => Stream_IO.Count'Image (File_Size)'Length);
+
+      Put_Line (" duration =" & Duration'Image (Curr_Dur));
+   end Print_Statistic;
+
+   -----------
+   -- Stamp --
+   -----------
+
+   procedure Stamp is
+   begin
+      Time_Stamp := Ada.Calendar.Clock;
+   end Stamp;
+
+begin
+   Ada.Text_IO.Put_Line ("ZLib " & ZLib.Version);
+
+   loop
+      Generate_File;
+
+      for Level in ZLib.Compression_Level'Range loop
+
+         Ada.Text_IO.Put_Line ("Level ="
+            & ZLib.Compression_Level'Image (Level));
+
+         --  Test generic interface.
+         Open   (File_In, In_File, In_File_Name);
+         Create (File_Out, Out_File, Z_File_Name);
+
+         Stamp;
+
+         --  Deflate using generic instantiation.
+
+         ZLib.Deflate_Init
+               (Filter   => Filter,
+                Level    => Level,
+                Strategy => Strategy,
+                Header   => Header);
+
+         Translate (Filter);
+         Print_Statistic ("Generic compress", ZLib.Total_Out (Filter));
+         ZLib.Close (Filter);
+
+         Close (File_In);
+         Close (File_Out);
+
+         Open   (File_In, In_File, Z_File_Name);
+         Create (File_Out, Out_File, Out_File_Name);
+
+         Stamp;
+
+         --  Inflate using generic instantiation.
+
+         ZLib.Inflate_Init (Filter, Header => Header);
+
+         Translate (Filter);
+         Print_Statistic ("Generic decompress", ZLib.Total_Out (Filter));
+
+         ZLib.Close (Filter);
+
+         Close (File_In);
+         Close (File_Out);
+
+         Compare_Files (In_File_Name, Out_File_Name);
+
+         --  Test stream interface.
+
+         --  Compress to the back stream.
+
+         Open   (File_In, In_File, In_File_Name);
+         Create (File_Back, Out_File, Z_File_Name);
+
+         Stamp;
+
+         ZLib.Streams.Create
+           (Stream          => File_Z,
+            Mode            => ZLib.Streams.Out_Stream,
+            Back            => ZLib.Streams.Stream_Access
+                                 (Stream (File_Back)),
+            Back_Compressed => True,
+            Level           => Level,
+            Strategy        => Strategy,
+            Header          => Header);
+
+         Copy_Streams
+           (Source => Stream (File_In).all,
+            Target => File_Z);
+
+         --  Flushing internal buffers to the back stream.
+
+         ZLib.Streams.Flush (File_Z, ZLib.Finish);
+
+         Print_Statistic ("Write compress",
+                          ZLib.Streams.Write_Total_Out (File_Z));
+
+         ZLib.Streams.Close (File_Z);
+
+         Close (File_In);
+         Close (File_Back);
+
+         --  Compare reading from original file and from
+         --  decompression stream.
+
+         Open (File_In,   In_File, In_File_Name);
+         Open (File_Back, In_File, Z_File_Name);
+
+         ZLib.Streams.Create
+           (Stream          => File_Z,
+            Mode            => ZLib.Streams.In_Stream,
+            Back            => ZLib.Streams.Stream_Access
+                                 (Stream (File_Back)),
+            Back_Compressed => True,
+            Header          => Header);
+
+         Stamp;
+         Compare_Streams (Stream (File_In).all, File_Z);
+
+         Print_Statistic ("Read decompress",
+                          ZLib.Streams.Read_Total_Out (File_Z));
+
+         ZLib.Streams.Close (File_Z);
+         Close (File_In);
+         Close (File_Back);
+
+         --  Compress by reading from compression stream.
+
+         Open (File_Back, In_File, In_File_Name);
+         Create (File_Out, Out_File, Z_File_Name);
+
+         ZLib.Streams.Create
+           (Stream          => File_Z,
+            Mode            => ZLib.Streams.In_Stream,
+            Back            => ZLib.Streams.Stream_Access
+                                 (Stream (File_Back)),
+            Back_Compressed => False,
+            Level           => Level,
+            Strategy        => Strategy,
+            Header          => Header);
+
+         Stamp;
+         Copy_Streams
+           (Source => File_Z,
+            Target => Stream (File_Out).all);
+
+         Print_Statistic ("Read compress",
+                          ZLib.Streams.Read_Total_Out (File_Z));
+
+         ZLib.Streams.Close (File_Z);
+
+         Close (File_Out);
+         Close (File_Back);
+
+         --  Decompress to decompression stream.
+
+         Open   (File_In,   In_File, Z_File_Name);
+         Create (File_Back, Out_File, Out_File_Name);
+
+         ZLib.Streams.Create
+           (Stream          => File_Z,
+            Mode            => ZLib.Streams.Out_Stream,
+            Back            => ZLib.Streams.Stream_Access
+                                 (Stream (File_Back)),
+            Back_Compressed => False,
+            Header          => Header);
+
+         Stamp;
+
+         Copy_Streams
+           (Source => Stream (File_In).all,
+            Target => File_Z);
+
+         Print_Statistic ("Write decompress",
+                          ZLib.Streams.Write_Total_Out (File_Z));
+
+         ZLib.Streams.Close (File_Z);
+         Close (File_In);
+         Close (File_Back);
+
+         Compare_Files (In_File_Name, Out_File_Name);
+      end loop;
+
+      Ada.Text_IO.Put_Line (Count'Image (File_Size) & " Ok.");
+
+      exit when not Continuous;
+
+      File_Size := File_Size + 1;
+   end loop;
+end Test;

contrib/ada/zlib-streams.adb

@@ -0,0 +1,225 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+
+--  $Id: zlib-streams.adb,v 1.10 2004/05/31 10:53:40 vagul Exp $
+
+with Ada.Unchecked_Deallocation;
+
+package body ZLib.Streams is
+
+   -----------
+   -- Close --
+   -----------
+
+   procedure Close (Stream : in out Stream_Type) is
+      procedure Free is new Ada.Unchecked_Deallocation
+         (Stream_Element_Array, Buffer_Access);
+   begin
+      if Stream.Mode = Out_Stream or Stream.Mode = Duplex then
+         --  We should flush the data written by the writer.
+
+         Flush (Stream, Finish);
+
+         Close (Stream.Writer);
+      end if;
+
+      if Stream.Mode = In_Stream or Stream.Mode = Duplex then
+         Close (Stream.Reader);
+         Free (Stream.Buffer);
+      end if;
+   end Close;
+
+   ------------
+   -- Create --
+   ------------
+
+   procedure Create
+     (Stream            :    out Stream_Type;
+      Mode              : in     Stream_Mode;
+      Back              : in     Stream_Access;
+      Back_Compressed   : in     Boolean;
+      Level             : in     Compression_Level := Default_Compression;
+      Strategy          : in     Strategy_Type     := Default_Strategy;
+      Header            : in     Header_Type       := Default;
+      Read_Buffer_Size  : in     Ada.Streams.Stream_Element_Offset
+                                    := Default_Buffer_Size;
+      Write_Buffer_Size : in     Ada.Streams.Stream_Element_Offset
+                                    := Default_Buffer_Size)
+   is
+
+      subtype Buffer_Subtype is Stream_Element_Array (1 .. Read_Buffer_Size);
+
+      procedure Init_Filter
+         (Filter   : in out Filter_Type;
+          Compress : in     Boolean);
+
+      -----------------
+      -- Init_Filter --
+      -----------------
+
+      procedure Init_Filter
+         (Filter   : in out Filter_Type;
+          Compress : in     Boolean) is
+      begin
+         if Compress then
+            Deflate_Init
+              (Filter, Level, Strategy, Header => Header);
+         else
+            Inflate_Init (Filter, Header => Header);
+         end if;
+      end Init_Filter;
+
+   begin
+      Stream.Back := Back;
+      Stream.Mode := Mode;
+
+      if Mode = Out_Stream or Mode = Duplex then
+         Init_Filter (Stream.Writer, Back_Compressed);
+         Stream.Buffer_Size := Write_Buffer_Size;
+      else
+         Stream.Buffer_Size := 0;
+      end if;
+
+      if Mode = In_Stream or Mode = Duplex then
+         Init_Filter (Stream.Reader, not Back_Compressed);
+
+         Stream.Buffer     := new Buffer_Subtype;
+         Stream.Rest_First := Stream.Buffer'Last + 1;
+         Stream.Rest_Last  := Stream.Buffer'Last;
+      end if;
+   end Create;
+
+   -----------
+   -- Flush --
+   -----------
+
+   procedure Flush
+     (Stream : in out Stream_Type;
+      Mode   : in     Flush_Mode := Sync_Flush)
+   is
+      Buffer : Stream_Element_Array (1 .. Stream.Buffer_Size);
+      Last   : Stream_Element_Offset;
+   begin
+      loop
+         Flush (Stream.Writer, Buffer, Last, Mode);
+
+         Ada.Streams.Write (Stream.Back.all, Buffer (1 .. Last));
+
+         exit when Last < Buffer'Last;
+      end loop;
+   end Flush;
+
+   -------------
+   -- Is_Open --
+   -------------
+
+   function Is_Open (Stream : Stream_Type) return Boolean is
+   begin
+      return Is_Open (Stream.Reader) or else Is_Open (Stream.Writer);
+   end Is_Open;
+
+   ----------
+   -- Read --
+   ----------
+
+   procedure Read
+     (Stream : in out Stream_Type;
+      Item   :    out Stream_Element_Array;
+      Last   :    out Stream_Element_Offset)
+   is
+
+      procedure Read
+        (Item : out Stream_Element_Array;
+         Last : out Stream_Element_Offset);
+
+      ----------
+      -- Read --
+      ----------
+
+      procedure Read
+        (Item : out Stream_Element_Array;
+         Last : out Stream_Element_Offset) is
+      begin
+         Ada.Streams.Read (Stream.Back.all, Item, Last);
+      end Read;
+
+      procedure Read is new ZLib.Read
+         (Read       => Read,
+          Buffer     => Stream.Buffer.all,
+          Rest_First => Stream.Rest_First,
+          Rest_Last  => Stream.Rest_Last);
+
+   begin
+      Read (Stream.Reader, Item, Last);
+   end Read;
+
+   -------------------
+   -- Read_Total_In --
+   -------------------
+
+   function Read_Total_In (Stream : in Stream_Type) return Count is
+   begin
+      return Total_In (Stream.Reader);
+   end Read_Total_In;
+
+   --------------------
+   -- Read_Total_Out --
+   --------------------
+
+   function Read_Total_Out (Stream : in Stream_Type) return Count is
+   begin
+      return Total_Out (Stream.Reader);
+   end Read_Total_Out;
+
+   -----------
+   -- Write --
+   -----------
+
+   procedure Write
+     (Stream : in out Stream_Type;
+      Item   : in     Stream_Element_Array)
+   is
+
+      procedure Write (Item : in Stream_Element_Array);
+
+      -----------
+      -- Write --
+      -----------
+
+      procedure Write (Item : in Stream_Element_Array) is
+      begin
+         Ada.Streams.Write (Stream.Back.all, Item);
+      end Write;
+
+      procedure Write is new ZLib.Write
+         (Write       => Write,
+          Buffer_Size => Stream.Buffer_Size);
+
+   begin
+      Write (Stream.Writer, Item, No_Flush);
+   end Write;
+
+   --------------------
+   -- Write_Total_In --
+   --------------------
+
+   function Write_Total_In (Stream : in Stream_Type) return Count is
+   begin
+      return Total_In (Stream.Writer);
+   end Write_Total_In;
+
+   ---------------------
+   -- Write_Total_Out --
+   ---------------------
+
+   function Write_Total_Out (Stream : in Stream_Type) return Count is
+   begin
+      return Total_Out (Stream.Writer);
+   end Write_Total_Out;
+
+end ZLib.Streams;

contrib/ada/zlib-streams.ads

@@ -0,0 +1,114 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+
+--  $Id: zlib-streams.ads,v 1.12 2004/05/31 10:53:40 vagul Exp $
+
+package ZLib.Streams is
+
+   type Stream_Mode is (In_Stream, Out_Stream, Duplex);
+
+   type Stream_Access is access all Ada.Streams.Root_Stream_Type'Class;
+
+   type Stream_Type is
+      new Ada.Streams.Root_Stream_Type with private;
+
+   procedure Read
+     (Stream : in out Stream_Type;
+      Item   :    out Ada.Streams.Stream_Element_Array;
+      Last   :    out Ada.Streams.Stream_Element_Offset);
+
+   procedure Write
+     (Stream : in out Stream_Type;
+      Item   : in     Ada.Streams.Stream_Element_Array);
+
+   procedure Flush
+     (Stream : in out Stream_Type;
+      Mode   : in     Flush_Mode := Sync_Flush);
+   --  Flush the written data to the back stream,
+   --  all data placed to the compressor is flushing to the Back stream.
+   --  Should not be used untill necessary, becouse it is decreasing
+   --  compression.
+
+   function Read_Total_In (Stream : in Stream_Type) return Count;
+   pragma Inline (Read_Total_In);
+   --  Return total number of bytes read from back stream so far.
+
+   function Read_Total_Out (Stream : in Stream_Type) return Count;
+   pragma Inline (Read_Total_Out);
+   --  Return total number of bytes read so far.
+
+   function Write_Total_In (Stream : in Stream_Type) return Count;
+   pragma Inline (Write_Total_In);
+   --  Return total number of bytes written so far.
+
+   function Write_Total_Out (Stream : in Stream_Type) return Count;
+   pragma Inline (Write_Total_Out);
+   --  Return total number of bytes written to the back stream.
+
+   procedure Create
+     (Stream            :    out Stream_Type;
+      Mode              : in     Stream_Mode;
+      Back              : in     Stream_Access;
+      Back_Compressed   : in     Boolean;
+      Level             : in     Compression_Level := Default_Compression;
+      Strategy          : in     Strategy_Type     := Default_Strategy;
+      Header            : in     Header_Type       := Default;
+      Read_Buffer_Size  : in     Ada.Streams.Stream_Element_Offset
+                                    := Default_Buffer_Size;
+      Write_Buffer_Size : in     Ada.Streams.Stream_Element_Offset
+                                    := Default_Buffer_Size);
+   --  Create the Comression/Decompression stream.
+   --  If mode is In_Stream then Write operation is disabled.
+   --  If mode is Out_Stream then Read operation is disabled.
+
+   --  If Back_Compressed is true then
+   --  Data written to the Stream is compressing to the Back stream
+   --  and data read from the Stream is decompressed data from the Back stream.
+
+   --  If Back_Compressed is false then
+   --  Data written to the Stream is decompressing to the Back stream
+   --  and data read from the Stream is compressed data from the Back stream.
+
+   --  !!! When the Need_Header is False ZLib-Ada is using undocumented
+   --  ZLib 1.1.4 functionality to do not create/wait for ZLib headers.
+
+   function Is_Open (Stream : Stream_Type) return Boolean;
+
+   procedure Close (Stream : in out Stream_Type);
+
+private
+
+   use Ada.Streams;
+
+   type Buffer_Access is access all Stream_Element_Array;
+
+   type Stream_Type
+     is new Root_Stream_Type with
+   record
+      Mode       : Stream_Mode;
+
+      Buffer     : Buffer_Access;
+      Rest_First : Stream_Element_Offset;
+      Rest_Last  : Stream_Element_Offset;
+      --  Buffer for Read operation.
+      --  We need to have this buffer in the record
+      --  becouse not all read data from back stream
+      --  could be processed during the read operation.
+
+      Buffer_Size : Stream_Element_Offset;
+      --  Buffer size for write operation.
+      --  We do not need to have this buffer
+      --  in the record becouse all data could be
+      --  processed in the write operation.
+
+      Back       : Stream_Access;
+      Reader     : Filter_Type;
+      Writer     : Filter_Type;
+   end record;
+
+end ZLib.Streams;

contrib/ada/zlib-thin.adb

@@ -0,0 +1,141 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+
+--  $Id: zlib-thin.adb,v 1.8 2003/12/14 18:27:31 vagul Exp $
+
+package body ZLib.Thin is
+
+   ZLIB_VERSION  : constant Chars_Ptr := zlibVersion;
+
+   Z_Stream_Size : constant Int := Z_Stream'Size / System.Storage_Unit;
+
+   --------------
+   -- Avail_In --
+   --------------
+
+   function Avail_In (Strm : in Z_Stream) return UInt is
+   begin
+      return Strm.Avail_In;
+   end Avail_In;
+
+   ---------------
+   -- Avail_Out --
+   ---------------
+
+   function Avail_Out (Strm : in Z_Stream) return UInt is
+   begin
+      return Strm.Avail_Out;
+   end Avail_Out;
+
+   ------------------
+   -- Deflate_Init --
+   ------------------
+
+   function Deflate_Init
+     (strm       : Z_Streamp;
+      level      : Int;
+      method     : Int;
+      windowBits : Int;
+      memLevel   : Int;
+      strategy   : Int)
+      return       Int is
+   begin
+      return deflateInit2
+               (strm,
+                level,
+                method,
+                windowBits,
+                memLevel,
+                strategy,
+                ZLIB_VERSION,
+                Z_Stream_Size);
+   end Deflate_Init;
+
+   ------------------
+   -- Inflate_Init --
+   ------------------
+
+   function Inflate_Init (strm : Z_Streamp; windowBits : Int) return Int is
+   begin
+      return inflateInit2 (strm, windowBits, ZLIB_VERSION, Z_Stream_Size);
+   end Inflate_Init;
+
+   ------------------------
+   -- Last_Error_Message --
+   ------------------------
+
+   function Last_Error_Message (Strm : in Z_Stream) return String is
+      use Interfaces.C.Strings;
+   begin
+      if Strm.msg = Null_Ptr then
+         return "";
+      else
+         return Value (Strm.msg);
+      end if;
+   end Last_Error_Message;
+
+   ------------
+   -- Set_In --
+   ------------
+
+   procedure Set_In
+     (Strm   : in out Z_Stream;
+      Buffer : in     Voidp;
+      Size   : in     UInt) is
+   begin
+      Strm.Next_In  := Buffer;
+      Strm.Avail_In := Size;
+   end Set_In;
+
+   ------------------
+   -- Set_Mem_Func --
+   ------------------
+
+   procedure Set_Mem_Func
+     (Strm   : in out Z_Stream;
+      Opaque : in     Voidp;
+      Alloc  : in     alloc_func;
+      Free   : in     free_func) is
+   begin
+      Strm.opaque := Opaque;
+      Strm.zalloc := Alloc;
+      Strm.zfree  := Free;
+   end Set_Mem_Func;
+
+   -------------
+   -- Set_Out --
+   -------------
+
+   procedure Set_Out
+     (Strm   : in out Z_Stream;
+      Buffer : in     Voidp;
+      Size   : in     UInt) is
+   begin
+      Strm.Next_Out  := Buffer;
+      Strm.Avail_Out := Size;
+   end Set_Out;
+
+   --------------
+   -- Total_In --
+   --------------
+
+   function Total_In (Strm : in Z_Stream) return ULong is
+   begin
+      return Strm.Total_In;
+   end Total_In;
+
+   ---------------
+   -- Total_Out --
+   ---------------
+
+   function Total_Out (Strm : in Z_Stream) return ULong is
+   begin
+      return Strm.Total_Out;
+   end Total_Out;
+
+end ZLib.Thin;

contrib/ada/zlib-thin.ads

@@ -0,0 +1,450 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+
+--  $Id: zlib-thin.ads,v 1.11 2004/07/23 06:33:11 vagul Exp $
+
+with Interfaces.C.Strings;
+
+with System;
+
+private package ZLib.Thin is
+
+   --  From zconf.h
+
+   MAX_MEM_LEVEL : constant := 9;         --  zconf.h:105
+                                          --  zconf.h:105
+   MAX_WBITS : constant := 15;      --  zconf.h:115
+                                    --  32K LZ77 window
+                                    --  zconf.h:115
+   SEEK_SET : constant := 8#0000#;  --  zconf.h:244
+                                    --  Seek from beginning of file.
+                                    --  zconf.h:244
+   SEEK_CUR : constant := 1;        --  zconf.h:245
+                                    --  Seek from current position.
+                                    --  zconf.h:245
+   SEEK_END : constant := 2;        --  zconf.h:246
+                                    --  Set file pointer to EOF plus "offset"
+                                    --  zconf.h:246
+
+   type Byte is new Interfaces.C.unsigned_char; --  8 bits
+                                                --  zconf.h:214
+   type UInt is new Interfaces.C.unsigned;      --  16 bits or more
+                                                --  zconf.h:216
+   type Int is new Interfaces.C.int;
+
+   type ULong is new Interfaces.C.unsigned_long;     --  32 bits or more
+                                                     --  zconf.h:217
+   subtype Chars_Ptr is Interfaces.C.Strings.chars_ptr;
+
+   type ULong_Access is access ULong;
+   type Int_Access is access Int;
+
+   subtype Voidp is System.Address;            --  zconf.h:232
+
+   subtype Byte_Access is Voidp;
+
+   Nul : constant Voidp := System.Null_Address;
+   --  end from zconf
+
+   Z_NO_FLUSH : constant := 8#0000#;   --  zlib.h:125
+                                       --  zlib.h:125
+   Z_PARTIAL_FLUSH : constant := 1;       --  zlib.h:126
+                                          --  will be removed, use
+                                          --  Z_SYNC_FLUSH instead
+                                          --  zlib.h:126
+   Z_SYNC_FLUSH : constant := 2;       --  zlib.h:127
+                                       --  zlib.h:127
+   Z_FULL_FLUSH : constant := 3;       --  zlib.h:128
+                                       --  zlib.h:128
+   Z_FINISH : constant := 4;        --  zlib.h:129
+                                    --  zlib.h:129
+   Z_OK : constant := 8#0000#;   --  zlib.h:132
+                                 --  zlib.h:132
+   Z_STREAM_END : constant := 1;       --  zlib.h:133
+                                       --  zlib.h:133
+   Z_NEED_DICT : constant := 2;        --  zlib.h:134
+                                       --  zlib.h:134
+   Z_ERRNO : constant := -1;        --  zlib.h:135
+                                    --  zlib.h:135
+   Z_STREAM_ERROR : constant := -2;       --  zlib.h:136
+                                          --  zlib.h:136
+   Z_DATA_ERROR : constant := -3;      --  zlib.h:137
+                                       --  zlib.h:137
+   Z_MEM_ERROR : constant := -4;       --  zlib.h:138
+                                       --  zlib.h:138
+   Z_BUF_ERROR : constant := -5;       --  zlib.h:139
+                                       --  zlib.h:139
+   Z_VERSION_ERROR : constant := -6;      --  zlib.h:140
+                                          --  zlib.h:140
+   Z_NO_COMPRESSION : constant := 8#0000#;   --  zlib.h:145
+                                             --  zlib.h:145
+   Z_BEST_SPEED : constant := 1;       --  zlib.h:146
+                                       --  zlib.h:146
+   Z_BEST_COMPRESSION : constant := 9;       --  zlib.h:147
+                                             --  zlib.h:147
+   Z_DEFAULT_COMPRESSION : constant := -1;      --  zlib.h:148
+                                                --  zlib.h:148
+   Z_FILTERED : constant := 1;      --  zlib.h:151
+                                    --  zlib.h:151
+   Z_HUFFMAN_ONLY : constant := 2;        --  zlib.h:152
+                                          --  zlib.h:152
+   Z_DEFAULT_STRATEGY : constant := 8#0000#; --  zlib.h:153
+                                             --  zlib.h:153
+   Z_BINARY : constant := 8#0000#;  --  zlib.h:156
+                                    --  zlib.h:156
+   Z_ASCII : constant := 1;      --  zlib.h:157
+                                 --  zlib.h:157
+   Z_UNKNOWN : constant := 2;       --  zlib.h:158
+                                    --  zlib.h:158
+   Z_DEFLATED : constant := 8;      --  zlib.h:161
+                                    --  zlib.h:161
+   Z_NULL : constant := 8#0000#; --  zlib.h:164
+                                 --  for initializing zalloc, zfree, opaque
+                                 --  zlib.h:164
+   type gzFile is new Voidp;                  --  zlib.h:646
+
+   type Z_Stream is private;
+
+   type Z_Streamp is access all Z_Stream;     --  zlib.h:89
+
+   type alloc_func is access function
+     (Opaque : Voidp;
+      Items  : UInt;
+      Size   : UInt)
+      return Voidp; --  zlib.h:63
+
+   type free_func is access procedure (opaque : Voidp; address : Voidp);
+
+   function zlibVersion return Chars_Ptr;
+
+   function Deflate (strm : Z_Streamp; flush : Int) return Int;
+
+   function DeflateEnd (strm : Z_Streamp) return Int;
+
+   function Inflate (strm : Z_Streamp; flush : Int) return Int;
+
+   function InflateEnd (strm : Z_Streamp) return Int;
+
+   function deflateSetDictionary
+     (strm       : Z_Streamp;
+      dictionary : Byte_Access;
+      dictLength : UInt)
+      return       Int;
+
+   function deflateCopy (dest : Z_Streamp; source : Z_Streamp) return Int;
+   --  zlib.h:478
+
+   function deflateReset (strm : Z_Streamp) return Int; -- zlib.h:495
+
+   function deflateParams
+     (strm     : Z_Streamp;
+      level    : Int;
+      strategy : Int)
+      return     Int;       -- zlib.h:506
+
+   function inflateSetDictionary
+     (strm       : Z_Streamp;
+      dictionary : Byte_Access;
+      dictLength : UInt)
+      return       Int; --  zlib.h:548
+
+   function inflateSync (strm : Z_Streamp) return Int;  --  zlib.h:565
+
+   function inflateReset (strm : Z_Streamp) return Int; --  zlib.h:580
+
+   function compress
+     (dest      : Byte_Access;
+      destLen   : ULong_Access;
+      source    : Byte_Access;
+      sourceLen : ULong)
+      return      Int;           -- zlib.h:601
+
+   function compress2
+     (dest      : Byte_Access;
+      destLen   : ULong_Access;
+      source    : Byte_Access;
+      sourceLen : ULong;
+      level     : Int)
+      return      Int;          -- zlib.h:615
+
+   function uncompress
+     (dest      : Byte_Access;
+      destLen   : ULong_Access;
+      source    : Byte_Access;
+      sourceLen : ULong)
+      return      Int;
+
+   function gzopen (path : Chars_Ptr; mode : Chars_Ptr) return gzFile;
+
+   function gzdopen (fd : Int; mode : Chars_Ptr) return gzFile;
+
+   function gzsetparams
+     (file     : gzFile;
+      level    : Int;
+      strategy : Int)
+      return     Int;
+
+   function gzread
+     (file : gzFile;
+      buf  : Voidp;
+      len  : UInt)
+      return Int;
+
+   function gzwrite
+     (file : in gzFile;
+      buf  : in Voidp;
+      len  : in UInt)
+      return Int;
+
+   function gzprintf (file : in gzFile; format : in Chars_Ptr) return Int;
+
+   function gzputs (file : in gzFile; s : in Chars_Ptr) return Int;
+
+   function gzgets
+     (file : gzFile;
+      buf  : Chars_Ptr;
+      len  : Int)
+      return Chars_Ptr;
+
+   function gzputc (file : gzFile; char : Int) return Int;
+
+   function gzgetc (file : gzFile) return Int;
+
+   function gzflush (file : gzFile; flush : Int) return Int;
+
+   function gzseek
+     (file   : gzFile;
+      offset : Int;
+      whence : Int)
+      return   Int;
+
+   function gzrewind (file : gzFile) return Int;
+
+   function gztell (file : gzFile) return Int;
+
+   function gzeof (file : gzFile) return Int;
+
+   function gzclose (file : gzFile) return Int;
+
+   function gzerror (file : gzFile; errnum : Int_Access) return Chars_Ptr;
+
+   function adler32
+     (adler : ULong;
+      buf   : Byte_Access;
+      len   : UInt)
+      return  ULong;
+
+   function crc32
+     (crc  : ULong;
+      buf  : Byte_Access;
+      len  : UInt)
+      return ULong;
+
+   function deflateInit
+     (strm        : Z_Streamp;
+      level       : Int;
+      version     : Chars_Ptr;
+      stream_size : Int)
+      return        Int;
+
+   function deflateInit2
+     (strm        : Z_Streamp;
+      level       : Int;
+      method      : Int;
+      windowBits  : Int;
+      memLevel    : Int;
+      strategy    : Int;
+      version     : Chars_Ptr;
+      stream_size : Int)
+      return        Int;
+
+   function Deflate_Init
+     (strm       : Z_Streamp;
+      level      : Int;
+      method     : Int;
+      windowBits : Int;
+      memLevel   : Int;
+      strategy   : Int)
+      return       Int;
+   pragma Inline (Deflate_Init);
+
+   function inflateInit
+     (strm        : Z_Streamp;
+      version     : Chars_Ptr;
+      stream_size : Int)
+      return        Int;
+
+   function inflateInit2
+     (strm        : in Z_Streamp;
+      windowBits  : in Int;
+      version     : in Chars_Ptr;
+      stream_size : in Int)
+      return      Int;
+
+   function inflateBackInit
+     (strm        : in Z_Streamp;
+      windowBits  : in Int;
+      window      : in Byte_Access;
+      version     : in Chars_Ptr;
+      stream_size : in Int)
+      return      Int;
+   --  Size of window have to be 2**windowBits.
+
+   function Inflate_Init (strm : Z_Streamp; windowBits : Int) return Int;
+   pragma Inline (Inflate_Init);
+
+   function zError (err : Int) return Chars_Ptr;
+
+   function inflateSyncPoint (z : Z_Streamp) return Int;
+
+   function get_crc_table return ULong_Access;
+
+   --  Interface to the available fields of the z_stream structure.
+   --  The application must update next_in and avail_in when avail_in has
+   --  dropped to zero. It must update next_out and avail_out when avail_out
+   --  has dropped to zero. The application must initialize zalloc, zfree and
+   --  opaque before calling the init function.
+
+   procedure Set_In
+     (Strm   : in out Z_Stream;
+      Buffer : in Voidp;
+      Size   : in UInt);
+   pragma Inline (Set_In);
+
+   procedure Set_Out
+     (Strm   : in out Z_Stream;
+      Buffer : in Voidp;
+      Size   : in UInt);
+   pragma Inline (Set_Out);
+
+   procedure Set_Mem_Func
+     (Strm   : in out Z_Stream;
+      Opaque : in Voidp;
+      Alloc  : in alloc_func;
+      Free   : in free_func);
+   pragma Inline (Set_Mem_Func);
+
+   function Last_Error_Message (Strm : in Z_Stream) return String;
+   pragma Inline (Last_Error_Message);
+
+   function Avail_Out (Strm : in Z_Stream) return UInt;
+   pragma Inline (Avail_Out);
+
+   function Avail_In (Strm : in Z_Stream) return UInt;
+   pragma Inline (Avail_In);
+
+   function Total_In (Strm : in Z_Stream) return ULong;
+   pragma Inline (Total_In);
+
+   function Total_Out (Strm : in Z_Stream) return ULong;
+   pragma Inline (Total_Out);
+
+   function inflateCopy
+     (dest   : in Z_Streamp;
+      Source : in Z_Streamp)
+      return Int;
+
+   function compressBound (Source_Len : in ULong) return ULong;
+
+   function deflateBound
+     (Strm       : in Z_Streamp;
+      Source_Len : in ULong)
+      return     ULong;
+
+   function gzungetc (C : in Int; File : in  gzFile) return Int;
+
+   function zlibCompileFlags return ULong;
+
+private
+
+   type Z_Stream is record            -- zlib.h:68
+      Next_In   : Voidp      := Nul;  -- next input byte
+      Avail_In  : UInt       := 0;    -- number of bytes available at next_in
+      Total_In  : ULong      := 0;    -- total nb of input bytes read so far
+      Next_Out  : Voidp      := Nul;  -- next output byte should be put there
+      Avail_Out : UInt       := 0;    -- remaining free space at next_out
+      Total_Out : ULong      := 0;    -- total nb of bytes output so far
+      msg       : Chars_Ptr;          -- last error message, NULL if no error
+      state     : Voidp;              -- not visible by applications
+      zalloc    : alloc_func := null; -- used to allocate the internal state
+      zfree     : free_func  := null; -- used to free the internal state
+      opaque    : Voidp;              -- private data object passed to
+                                      --  zalloc and zfree
+      data_type : Int;                -- best guess about the data type:
+                                      --  ascii or binary
+      adler     : ULong;              -- adler32 value of the uncompressed
+                                      --  data
+      reserved  : ULong;              -- reserved for future use
+   end record;
+
+   pragma Convention (C, Z_Stream);
+
+   pragma Import (C, zlibVersion, "zlibVersion");
+   pragma Import (C, Deflate, "deflate");
+   pragma Import (C, DeflateEnd, "deflateEnd");
+   pragma Import (C, Inflate, "inflate");
+   pragma Import (C, InflateEnd, "inflateEnd");
+   pragma Import (C, deflateSetDictionary, "deflateSetDictionary");
+   pragma Import (C, deflateCopy, "deflateCopy");
+   pragma Import (C, deflateReset, "deflateReset");
+   pragma Import (C, deflateParams, "deflateParams");
+   pragma Import (C, inflateSetDictionary, "inflateSetDictionary");
+   pragma Import (C, inflateSync, "inflateSync");
+   pragma Import (C, inflateReset, "inflateReset");
+   pragma Import (C, compress, "compress");
+   pragma Import (C, compress2, "compress2");
+   pragma Import (C, uncompress, "uncompress");
+   pragma Import (C, gzopen, "gzopen");
+   pragma Import (C, gzdopen, "gzdopen");
+   pragma Import (C, gzsetparams, "gzsetparams");
+   pragma Import (C, gzread, "gzread");
+   pragma Import (C, gzwrite, "gzwrite");
+   pragma Import (C, gzprintf, "gzprintf");
+   pragma Import (C, gzputs, "gzputs");
+   pragma Import (C, gzgets, "gzgets");
+   pragma Import (C, gzputc, "gzputc");
+   pragma Import (C, gzgetc, "gzgetc");
+   pragma Import (C, gzflush, "gzflush");
+   pragma Import (C, gzseek, "gzseek");
+   pragma Import (C, gzrewind, "gzrewind");
+   pragma Import (C, gztell, "gztell");
+   pragma Import (C, gzeof, "gzeof");
+   pragma Import (C, gzclose, "gzclose");
+   pragma Import (C, gzerror, "gzerror");
+   pragma Import (C, adler32, "adler32");
+   pragma Import (C, crc32, "crc32");
+   pragma Import (C, deflateInit, "deflateInit_");
+   pragma Import (C, inflateInit, "inflateInit_");
+   pragma Import (C, deflateInit2, "deflateInit2_");
+   pragma Import (C, inflateInit2, "inflateInit2_");
+   pragma Import (C, zError, "zError");
+   pragma Import (C, inflateSyncPoint, "inflateSyncPoint");
+   pragma Import (C, get_crc_table, "get_crc_table");
+
+   --  since zlib 1.2.0:
+
+   pragma Import (C, inflateCopy, "inflateCopy");
+   pragma Import (C, compressBound, "compressBound");
+   pragma Import (C, deflateBound, "deflateBound");
+   pragma Import (C, gzungetc, "gzungetc");
+   pragma Import (C, zlibCompileFlags, "zlibCompileFlags");
+
+   pragma Import (C, inflateBackInit, "inflateBackInit_");
+
+   --  I stopped binding the inflateBack routines, becouse realize that
+   --  it does not support zlib and gzip headers for now, and have no
+   --  symmetric deflateBack routines.
+   --  ZLib-Ada is symmetric regarding deflate/inflate data transformation
+   --  and has a similar generic callback interface for the
+   --  deflate/inflate transformation based on the regular Deflate/Inflate
+   --  routines.
+
+   --  pragma Import (C, inflateBack, "inflateBack");
+   --  pragma Import (C, inflateBackEnd, "inflateBackEnd");
+
+end ZLib.Thin;

contrib/ada/zlib.adb

@@ -0,0 +1,701 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2004 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+
+--  $Id: zlib.adb,v 1.31 2004/09/06 06:53:19 vagul Exp $
+
+with Ada.Exceptions;
+with Ada.Unchecked_Conversion;
+with Ada.Unchecked_Deallocation;
+
+with Interfaces.C.Strings;
+
+with ZLib.Thin;
+
+package body ZLib is
+
+   use type Thin.Int;
+
+   type Z_Stream is new Thin.Z_Stream;
+
+   type Return_Code_Enum is
+      (OK,
+       STREAM_END,
+       NEED_DICT,
+       ERRNO,
+       STREAM_ERROR,
+       DATA_ERROR,
+       MEM_ERROR,
+       BUF_ERROR,
+       VERSION_ERROR);
+
+   type Flate_Step_Function is access
+     function (Strm : in Thin.Z_Streamp; Flush : in Thin.Int) return Thin.Int;
+   pragma Convention (C, Flate_Step_Function);
+
+   type Flate_End_Function is access
+      function (Ctrm : in Thin.Z_Streamp) return Thin.Int;
+   pragma Convention (C, Flate_End_Function);
+
+   type Flate_Type is record
+      Step : Flate_Step_Function;
+      Done : Flate_End_Function;
+   end record;
+
+   subtype Footer_Array is Stream_Element_Array (1 .. 8);
+
+   Simple_GZip_Header : constant Stream_Element_Array (1 .. 10)
+     := (16#1f#, 16#8b#,                 --  Magic header
+         16#08#,                         --  Z_DEFLATED
+         16#00#,                         --  Flags
+         16#00#, 16#00#, 16#00#, 16#00#, --  Time
+         16#00#,                         --  XFlags
+         16#03#                          --  OS code
+        );
+   --  The simplest gzip header is not for informational, but just for
+   --  gzip format compatibility.
+   --  Note that some code below is using assumption
+   --  Simple_GZip_Header'Last > Footer_Array'Last, so do not make
+   --  Simple_GZip_Header'Last <= Footer_Array'Last.
+
+   Return_Code : constant array (Thin.Int range <>) of Return_Code_Enum
+     := (0 => OK,
+         1 => STREAM_END,
+         2 => NEED_DICT,
+        -1 => ERRNO,
+        -2 => STREAM_ERROR,
+        -3 => DATA_ERROR,
+        -4 => MEM_ERROR,
+        -5 => BUF_ERROR,
+        -6 => VERSION_ERROR);
+
+   Flate : constant array (Boolean) of Flate_Type
+     := (True  => (Step => Thin.Deflate'Access,
+                   Done => Thin.DeflateEnd'Access),
+         False => (Step => Thin.Inflate'Access,
+                   Done => Thin.InflateEnd'Access));
+
+   Flush_Finish : constant array (Boolean) of Flush_Mode
+     := (True => Finish, False => No_Flush);
+
+   procedure Raise_Error (Stream : in Z_Stream);
+   pragma Inline (Raise_Error);
+
+   procedure Raise_Error (Message : in String);
+   pragma Inline (Raise_Error);
+
+   procedure Check_Error (Stream : in Z_Stream; Code : in Thin.Int);
+
+   procedure Free is new Ada.Unchecked_Deallocation
+      (Z_Stream, Z_Stream_Access);
+
+   function To_Thin_Access is new Ada.Unchecked_Conversion
+     (Z_Stream_Access, Thin.Z_Streamp);
+
+   procedure Translate_GZip
+     (Filter    : in out Filter_Type;
+      In_Data   : in     Ada.Streams.Stream_Element_Array;
+      In_Last   :    out Ada.Streams.Stream_Element_Offset;
+      Out_Data  :    out Ada.Streams.Stream_Element_Array;
+      Out_Last  :    out Ada.Streams.Stream_Element_Offset;
+      Flush     : in     Flush_Mode);
+   --  Separate translate routine for make gzip header.
+
+   procedure Translate_Auto
+     (Filter    : in out Filter_Type;
+      In_Data   : in     Ada.Streams.Stream_Element_Array;
+      In_Last   :    out Ada.Streams.Stream_Element_Offset;
+      Out_Data  :    out Ada.Streams.Stream_Element_Array;
+      Out_Last  :    out Ada.Streams.Stream_Element_Offset;
+      Flush     : in     Flush_Mode);
+   --  translate routine without additional headers.
+
+   -----------------
+   -- Check_Error --
+   -----------------
+
+   procedure Check_Error (Stream : in Z_Stream; Code : in Thin.Int) is
+      use type Thin.Int;
+   begin
+      if Code /= Thin.Z_OK then
+         Raise_Error
+            (Return_Code_Enum'Image (Return_Code (Code))
+              & ": " & Last_Error_Message (Stream));
+      end if;
+   end Check_Error;
+
+   -----------
+   -- Close --
+   -----------
+
+   procedure Close
+     (Filter       : in out Filter_Type;
+      Ignore_Error : in     Boolean := False)
+   is
+      Code : Thin.Int;
+   begin
+      if not Ignore_Error and then not Is_Open (Filter) then
+         raise Status_Error;
+      end if;
+
+      Code := Flate (Filter.Compression).Done (To_Thin_Access (Filter.Strm));
+
+      if Ignore_Error or else Code = Thin.Z_OK then
+         Free (Filter.Strm);
+      else
+         declare
+            Error_Message : constant String
+              := Last_Error_Message (Filter.Strm.all);
+         begin
+            Free (Filter.Strm);
+            Ada.Exceptions.Raise_Exception
+               (ZLib_Error'Identity,
+                Return_Code_Enum'Image (Return_Code (Code))
+                  & ": " & Error_Message);
+         end;
+      end if;
+   end Close;
+
+   -----------
+   -- CRC32 --
+   -----------
+
+   function CRC32
+     (CRC  : in Unsigned_32;
+      Data : in Ada.Streams.Stream_Element_Array)
+      return Unsigned_32
+   is
+      use Thin;
+   begin
+      return Unsigned_32 (crc32 (ULong (CRC),
+                                 Data'Address,
+                                 Data'Length));
+   end CRC32;
+
+   procedure CRC32
+     (CRC  : in out Unsigned_32;
+      Data : in     Ada.Streams.Stream_Element_Array) is
+   begin
+      CRC := CRC32 (CRC, Data);
+   end CRC32;
+
+   ------------------
+   -- Deflate_Init --
+   ------------------
+
+   procedure Deflate_Init
+     (Filter       : in out Filter_Type;
+      Level        : in     Compression_Level  := Default_Compression;
+      Strategy     : in     Strategy_Type      := Default_Strategy;
+      Method       : in     Compression_Method := Deflated;
+      Window_Bits  : in     Window_Bits_Type   := Default_Window_Bits;
+      Memory_Level : in     Memory_Level_Type  := Default_Memory_Level;
+      Header       : in     Header_Type        := Default)
+   is
+      use type Thin.Int;
+      Win_Bits : Thin.Int := Thin.Int (Window_Bits);
+   begin
+      if Is_Open (Filter) then
+         raise Status_Error;
+      end if;
+
+      --  We allow ZLib to make header only in case of default header type.
+      --  Otherwise we would either do header by ourselfs, or do not do
+      --  header at all.
+
+      if Header = None or else Header = GZip then
+         Win_Bits := -Win_Bits;
+      end if;
+
+      --  For the GZip CRC calculation and make headers.
+
+      if Header = GZip then
+         Filter.CRC    := 0;
+         Filter.Offset := Simple_GZip_Header'First;
+      else
+         Filter.Offset := Simple_GZip_Header'Last + 1;
+      end if;
+
+      Filter.Strm        := new Z_Stream;
+      Filter.Compression := True;
+      Filter.Stream_End  := False;
+      Filter.Header      := Header;
+
+      if Thin.Deflate_Init
+           (To_Thin_Access (Filter.Strm),
+            Level      => Thin.Int (Level),
+            method     => Thin.Int (Method),
+            windowBits => Win_Bits,
+            memLevel   => Thin.Int (Memory_Level),
+            strategy   => Thin.Int (Strategy)) /= Thin.Z_OK
+      then
+         Raise_Error (Filter.Strm.all);
+      end if;
+   end Deflate_Init;
+
+   -----------
+   -- Flush --
+   -----------
+
+   procedure Flush
+     (Filter    : in out Filter_Type;
+      Out_Data  :    out Ada.Streams.Stream_Element_Array;
+      Out_Last  :    out Ada.Streams.Stream_Element_Offset;
+      Flush     : in     Flush_Mode)
+   is
+      No_Data : Stream_Element_Array := (1 .. 0 => 0);
+      Last    : Stream_Element_Offset;
+   begin
+      Translate (Filter, No_Data, Last, Out_Data, Out_Last, Flush);
+   end Flush;
+
+   -----------------------
+   -- Generic_Translate --
+   -----------------------
+
+   procedure Generic_Translate
+     (Filter          : in out ZLib.Filter_Type;
+      In_Buffer_Size  : in     Integer := Default_Buffer_Size;
+      Out_Buffer_Size : in     Integer := Default_Buffer_Size)
+   is
+      In_Buffer  : Stream_Element_Array
+                     (1 .. Stream_Element_Offset (In_Buffer_Size));
+      Out_Buffer : Stream_Element_Array
+                     (1 .. Stream_Element_Offset (Out_Buffer_Size));
+      Last       : Stream_Element_Offset;
+      In_Last    : Stream_Element_Offset;
+      In_First   : Stream_Element_Offset;
+      Out_Last   : Stream_Element_Offset;
+   begin
+      Main : loop
+         Data_In (In_Buffer, Last);
+
+         In_First := In_Buffer'First;
+
+         loop
+            Translate
+              (Filter   => Filter,
+               In_Data  => In_Buffer (In_First .. Last),
+               In_Last  => In_Last,
+               Out_Data => Out_Buffer,
+               Out_Last => Out_Last,
+               Flush    => Flush_Finish (Last < In_Buffer'First));
+
+            if Out_Buffer'First <= Out_Last then
+               Data_Out (Out_Buffer (Out_Buffer'First .. Out_Last));
+            end if;
+
+            exit Main when Stream_End (Filter);
+
+            --  The end of in buffer.
+
+            exit when In_Last = Last;
+
+            In_First := In_Last + 1;
+         end loop;
+      end loop Main;
+
+   end Generic_Translate;
+
+   ------------------
+   -- Inflate_Init --
+   ------------------
+
+   procedure Inflate_Init
+     (Filter      : in out Filter_Type;
+      Window_Bits : in     Window_Bits_Type := Default_Window_Bits;
+      Header      : in     Header_Type      := Default)
+   is
+      use type Thin.Int;
+      Win_Bits : Thin.Int := Thin.Int (Window_Bits);
+
+      procedure Check_Version;
+      --  Check the latest header types compatibility.
+
+      procedure Check_Version is
+      begin
+         if Version <= "1.1.4" then
+            Raise_Error
+              ("Inflate header type " & Header_Type'Image (Header)
+               & " incompatible with ZLib version " & Version);
+         end if;
+      end Check_Version;
+
+   begin
+      if Is_Open (Filter) then
+         raise Status_Error;
+      end if;
+
+      case Header is
+         when None =>
+            Check_Version;
+
+            --  Inflate data without headers determined
+            --  by negative Win_Bits.
+
+            Win_Bits := -Win_Bits;
+         when GZip =>
+            Check_Version;
+
+            --  Inflate gzip data defined by flag 16.
+
+            Win_Bits := Win_Bits + 16;
+         when Auto =>
+            Check_Version;
+
+            --  Inflate with automatic detection
+            --  of gzip or native header defined by flag 32.
+
+            Win_Bits := Win_Bits + 32;
+         when Default => null;
+      end case;
+
+      Filter.Strm        := new Z_Stream;
+      Filter.Compression := False;
+      Filter.Stream_End  := False;
+      Filter.Header      := Header;
+
+      if Thin.Inflate_Init
+         (To_Thin_Access (Filter.Strm), Win_Bits) /= Thin.Z_OK
+      then
+         Raise_Error (Filter.Strm.all);
+      end if;
+   end Inflate_Init;
+
+   -------------
+   -- Is_Open --
+   -------------
+
+   function Is_Open (Filter : in Filter_Type) return Boolean is
+   begin
+      return Filter.Strm /= null;
+   end Is_Open;
+
+   -----------------
+   -- Raise_Error --
+   -----------------
+
+   procedure Raise_Error (Message : in String) is
+   begin
+      Ada.Exceptions.Raise_Exception (ZLib_Error'Identity, Message);
+   end Raise_Error;
+
+   procedure Raise_Error (Stream : in Z_Stream) is
+   begin
+      Raise_Error (Last_Error_Message (Stream));
+   end Raise_Error;
+
+   ----------
+   -- Read --
+   ----------
+
+   procedure Read
+     (Filter : in out Filter_Type;
+      Item   :    out Ada.Streams.Stream_Element_Array;
+      Last   :    out Ada.Streams.Stream_Element_Offset;
+      Flush  : in     Flush_Mode := No_Flush)
+   is
+      In_Last    : Stream_Element_Offset;
+      Item_First : Ada.Streams.Stream_Element_Offset := Item'First;
+      V_Flush    : Flush_Mode := Flush;
+
+   begin
+      pragma Assert (Rest_First in Buffer'First .. Buffer'Last + 1);
+      pragma Assert (Rest_Last in Buffer'First - 1 .. Buffer'Last);
+
+      loop
+         if Rest_Last = Buffer'First - 1 then
+            V_Flush := Finish;
+
+         elsif Rest_First > Rest_Last then
+            Read (Buffer, Rest_Last);
+            Rest_First := Buffer'First;
+
+            if Rest_Last < Buffer'First then
+               V_Flush := Finish;
+            end if;
+         end if;
+
+         Translate
+           (Filter   => Filter,
+            In_Data  => Buffer (Rest_First .. Rest_Last),
+            In_Last  => In_Last,
+            Out_Data => Item (Item_First .. Item'Last),
+            Out_Last => Last,
+            Flush    => V_Flush);
+
+         Rest_First := In_Last + 1;
+
+         exit when Stream_End (Filter)
+           or else Last = Item'Last
+           or else (Last >= Item'First and then Allow_Read_Some);
+
+         Item_First := Last + 1;
+      end loop;
+   end Read;
+
+   ----------------
+   -- Stream_End --
+   ----------------
+
+   function Stream_End (Filter : in Filter_Type) return Boolean is
+   begin
+      if Filter.Header = GZip and Filter.Compression then
+         return Filter.Stream_End
+            and then Filter.Offset = Footer_Array'Last + 1;
+      else
+         return Filter.Stream_End;
+      end if;
+   end Stream_End;
+
+   --------------
+   -- Total_In --
+   --------------
+
+   function Total_In (Filter : in Filter_Type) return Count is
+   begin
+      return Count (Thin.Total_In (To_Thin_Access (Filter.Strm).all));
+   end Total_In;
+
+   ---------------
+   -- Total_Out --
+   ---------------
+
+   function Total_Out (Filter : in Filter_Type) return Count is
+   begin
+      return Count (Thin.Total_Out (To_Thin_Access (Filter.Strm).all));
+   end Total_Out;
+
+   ---------------
+   -- Translate --
+   ---------------
+
+   procedure Translate
+     (Filter    : in out Filter_Type;
+      In_Data   : in     Ada.Streams.Stream_Element_Array;
+      In_Last   :    out Ada.Streams.Stream_Element_Offset;
+      Out_Data  :    out Ada.Streams.Stream_Element_Array;
+      Out_Last  :    out Ada.Streams.Stream_Element_Offset;
+      Flush     : in     Flush_Mode) is
+   begin
+      if Filter.Header = GZip and then Filter.Compression then
+         Translate_GZip
+           (Filter   => Filter,
+            In_Data  => In_Data,
+            In_Last  => In_Last,
+            Out_Data => Out_Data,
+            Out_Last => Out_Last,
+            Flush    => Flush);
+      else
+         Translate_Auto
+           (Filter   => Filter,
+            In_Data  => In_Data,
+            In_Last  => In_Last,
+            Out_Data => Out_Data,
+            Out_Last => Out_Last,
+            Flush    => Flush);
+      end if;
+   end Translate;
+
+   --------------------
+   -- Translate_Auto --
+   --------------------
+
+   procedure Translate_Auto
+     (Filter    : in out Filter_Type;
+      In_Data   : in     Ada.Streams.Stream_Element_Array;
+      In_Last   :    out Ada.Streams.Stream_Element_Offset;
+      Out_Data  :    out Ada.Streams.Stream_Element_Array;
+      Out_Last  :    out Ada.Streams.Stream_Element_Offset;
+      Flush     : in     Flush_Mode)
+   is
+      use type Thin.Int;
+      Code : Thin.Int;
+
+   begin
+      if not Is_Open (Filter) then
+         raise Status_Error;
+      end if;
+
+      if Out_Data'Length = 0 and then In_Data'Length = 0 then
+         raise Constraint_Error;
+      end if;
+
+      Set_Out (Filter.Strm.all, Out_Data'Address, Out_Data'Length);
+      Set_In  (Filter.Strm.all, In_Data'Address, In_Data'Length);
+
+      Code := Flate (Filter.Compression).Step
+        (To_Thin_Access (Filter.Strm),
+         Thin.Int (Flush));
+
+      if Code = Thin.Z_STREAM_END then
+         Filter.Stream_End := True;
+      else
+         Check_Error (Filter.Strm.all, Code);
+      end if;
+
+      In_Last  := In_Data'Last
+         - Stream_Element_Offset (Avail_In (Filter.Strm.all));
+      Out_Last := Out_Data'Last
+         - Stream_Element_Offset (Avail_Out (Filter.Strm.all));
+   end Translate_Auto;
+
+   --------------------
+   -- Translate_GZip --
+   --------------------
+
+   procedure Translate_GZip
+     (Filter    : in out Filter_Type;
+      In_Data   : in     Ada.Streams.Stream_Element_Array;
+      In_Last   :    out Ada.Streams.Stream_Element_Offset;
+      Out_Data  :    out Ada.Streams.Stream_Element_Array;
+      Out_Last  :    out Ada.Streams.Stream_Element_Offset;
+      Flush     : in     Flush_Mode)
+   is
+      Out_First : Stream_Element_Offset;
+
+      procedure Add_Data (Data : in Stream_Element_Array);
+      --  Add data to stream from the Filter.Offset till necessary,
+      --  used for add gzip headr/footer.
+
+      procedure Put_32
+        (Item : in out Stream_Element_Array;
+         Data : in     Unsigned_32);
+      pragma Inline (Put_32);
+
+      --------------
+      -- Add_Data --
+      --------------
+
+      procedure Add_Data (Data : in Stream_Element_Array) is
+         Data_First : Stream_Element_Offset renames Filter.Offset;
+         Data_Last  : Stream_Element_Offset;
+         Data_Len   : Stream_Element_Offset; --  -1
+         Out_Len    : Stream_Element_Offset; --  -1
+      begin
+         Out_First := Out_Last + 1;
+
+         if Data_First > Data'Last then
+            return;
+         end if;
+
+         Data_Len  := Data'Last     - Data_First;
+         Out_Len   := Out_Data'Last - Out_First;
+
+         if Data_Len <= Out_Len then
+            Out_Last  := Out_First  + Data_Len;
+            Data_Last := Data'Last;
+         else
+            Out_Last  := Out_Data'Last;
+            Data_Last := Data_First + Out_Len;
+         end if;
+
+         Out_Data (Out_First .. Out_Last) := Data (Data_First .. Data_Last);
+
+         Data_First := Data_Last + 1;
+         Out_First  := Out_Last + 1;
+      end Add_Data;
+
+      ------------
+      -- Put_32 --
+      ------------
+
+      procedure Put_32
+        (Item : in out Stream_Element_Array;
+         Data : in     Unsigned_32)
+      is
+         D : Unsigned_32 := Data;
+      begin
+         for J in Item'First .. Item'First + 3 loop
+            Item (J) := Stream_Element (D and 16#FF#);
+            D := Shift_Right (D, 8);
+         end loop;
+      end Put_32;
+
+   begin
+      Out_Last := Out_Data'First - 1;
+
+      if not Filter.Stream_End then
+         Add_Data (Simple_GZip_Header);
+
+         Translate_Auto
+           (Filter   => Filter,
+            In_Data  => In_Data,
+            In_Last  => In_Last,
+            Out_Data => Out_Data (Out_First .. Out_Data'Last),
+            Out_Last => Out_Last,
+            Flush    => Flush);
+
+         CRC32 (Filter.CRC, In_Data (In_Data'First .. In_Last));
+      end if;
+
+      if Filter.Stream_End and then Out_Last <= Out_Data'Last then
+         --  This detection method would work only when
+         --  Simple_GZip_Header'Last > Footer_Array'Last
+
+         if Filter.Offset = Simple_GZip_Header'Last + 1 then
+            Filter.Offset := Footer_Array'First;
+         end if;
+
+         declare
+            Footer : Footer_Array;
+         begin
+            Put_32 (Footer, Filter.CRC);
+            Put_32 (Footer (Footer'First + 4 .. Footer'Last),
+                    Unsigned_32 (Total_In (Filter)));
+            Add_Data (Footer);
+         end;
+      end if;
+   end Translate_GZip;
+
+   -------------
+   -- Version --
+   -------------
+
+   function Version return String is
+   begin
+      return Interfaces.C.Strings.Value (Thin.zlibVersion);
+   end Version;
+
+   -----------
+   -- Write --
+   -----------
+
+   procedure Write
+     (Filter : in out Filter_Type;
+      Item   : in     Ada.Streams.Stream_Element_Array;
+      Flush  : in     Flush_Mode := No_Flush)
+   is
+      Buffer   : Stream_Element_Array (1 .. Buffer_Size);
+      In_Last  : Stream_Element_Offset;
+      Out_Last : Stream_Element_Offset;
+      In_First : Stream_Element_Offset := Item'First;
+   begin
+      if Item'Length = 0 and Flush = No_Flush then
+         return;
+      end if;
+
+      loop
+         Translate
+           (Filter   => Filter,
+            In_Data  => Item (In_First .. Item'Last),
+            In_Last  => In_Last,
+            Out_Data => Buffer,
+            Out_Last => Out_Last,
+            Flush    => Flush);
+
+         if Out_Last >= Buffer'First then
+            Write (Buffer (1 .. Out_Last));
+         end if;
+
+         exit when In_Last = Item'Last or Stream_End (Filter);
+
+         In_First := In_Last + 1;
+      end loop;
+   end Write;
+
+end ZLib;

contrib/ada/zlib.ads

@@ -0,0 +1,328 @@
+------------------------------------------------------------------------------
+--                      ZLib for Ada thick binding.                         --
+--                                                                          --
+--              Copyright (C) 2002-2004 Dmitriy Anisimkov                   --
+--                                                                          --
+--  This library is free software; you can redistribute it and/or modify    --
+--  it under the terms of the GNU General Public License as published by    --
+--  the Free Software Foundation; either version 2 of the License, or (at   --
+--  your option) any later version.                                         --
+--                                                                          --
+--  This library is distributed in the hope that it will be useful, but     --
+--  WITHOUT ANY WARRANTY; without even the implied warranty of              --
+--  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU       --
+--  General Public License for more details.                                --
+--                                                                          --
+--  You should have received a copy of the GNU General Public License       --
+--  along with this library; if not, write to the Free Software Foundation, --
+--  Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.          --
+--                                                                          --
+--  As a special exception, if other files instantiate generics from this   --
+--  unit, or you link this unit with other files to produce an executable,  --
+--  this  unit  does not  by itself cause  the resulting executable to be   --
+--  covered by the GNU General Public License. This exception does not      --
+--  however invalidate any other reasons why the executable file  might be  --
+--  covered by the  GNU Public License.                                     --
+------------------------------------------------------------------------------
+
+--  $Id: zlib.ads,v 1.26 2004/09/06 06:53:19 vagul Exp $
+
+with Ada.Streams;
+
+with Interfaces;
+
+package ZLib is
+
+   ZLib_Error   : exception;
+   Status_Error : exception;
+
+   type Compression_Level is new Integer range -1 .. 9;
+
+   type Flush_Mode is private;
+
+   type Compression_Method is private;
+
+   type Window_Bits_Type is new Integer range 8 .. 15;
+
+   type Memory_Level_Type is new Integer range 1 .. 9;
+
+   type Unsigned_32 is new Interfaces.Unsigned_32;
+
+   type Strategy_Type is private;
+
+   type Header_Type is (None, Auto, Default, GZip);
+   --  Header type usage have a some limitation for inflate.
+   --  See comment for Inflate_Init.
+
+   subtype Count is Ada.Streams.Stream_Element_Count;
+
+   Default_Memory_Level : constant Memory_Level_Type := 8;
+   Default_Window_Bits  : constant Window_Bits_Type  := 15;
+
+   ----------------------------------
+   -- Compression method constants --
+   ----------------------------------
+
+   Deflated : constant Compression_Method;
+   --  Only one method allowed in this ZLib version
+
+   ---------------------------------
+   -- Compression level constants --
+   ---------------------------------
+
+   No_Compression      : constant Compression_Level := 0;
+   Best_Speed          : constant Compression_Level := 1;
+   Best_Compression    : constant Compression_Level := 9;
+   Default_Compression : constant Compression_Level := -1;
+
+   --------------------------
+   -- Flush mode constants --
+   --------------------------
+
+   No_Flush      : constant Flush_Mode;
+   --  Regular way for compression, no flush
+
+   Partial_Flush : constant Flush_Mode;
+   --  Will be removed, use Z_SYNC_FLUSH instead
+
+   Sync_Flush    : constant Flush_Mode;
+   --  All pending output is flushed to the output buffer and the output
+   --  is aligned on a byte boundary, so that the decompressor can get all
+   --  input data available so far. (In particular avail_in is zero after the
+   --  call if enough output space has been provided  before the call.)
+   --  Flushing may degrade compression for some compression algorithms and so
+   --  it should be used only when necessary.
+
+   Block_Flush   : constant Flush_Mode;
+   --  Z_BLOCK requests that inflate() stop
+   --  if and when it get to the next deflate block boundary. When decoding the
+   --  zlib or gzip format, this will cause inflate() to return immediately
+   --  after the header and before the first block. When doing a raw inflate,
+   --  inflate() will go ahead and process the first block, and will return
+   --  when it gets to the end of that block, or when it runs out of data.
+
+   Full_Flush    : constant Flush_Mode;
+   --  All output is flushed as with SYNC_FLUSH, and the compression state
+   --  is reset so that decompression can restart from this point if previous
+   --  compressed data has been damaged or if random access is desired. Using
+   --  Full_Flush too often can seriously degrade the compression.
+
+   Finish        : constant Flush_Mode;
+   --  Just for tell the compressor that input data is complete.
+
+   ------------------------------------
+   -- Compression strategy constants --
+   ------------------------------------
+
+   --  RLE stategy could be used only in version 1.2.0 and later.
+
+   Filtered         : constant Strategy_Type;
+   Huffman_Only     : constant Strategy_Type;
+   RLE              : constant Strategy_Type;
+   Default_Strategy : constant Strategy_Type;
+
+   Default_Buffer_Size : constant := 4096;
+
+   type Filter_Type is tagged limited private;
+   --  The filter is for compression and for decompression.
+   --  The usage of the type is depend of its initialization.
+
+   function Version return String;
+   pragma Inline (Version);
+   --  Return string representation of the ZLib version.
+
+   procedure Deflate_Init
+     (Filter       : in out Filter_Type;
+      Level        : in     Compression_Level  := Default_Compression;
+      Strategy     : in     Strategy_Type      := Default_Strategy;
+      Method       : in     Compression_Method := Deflated;
+      Window_Bits  : in     Window_Bits_Type   := Default_Window_Bits;
+      Memory_Level : in     Memory_Level_Type  := Default_Memory_Level;
+      Header       : in     Header_Type        := Default);
+   --  Compressor initialization.
+   --  When Header parameter is Auto or Default, then default zlib header
+   --  would be provided for compressed data.
+   --  When Header is GZip, then gzip header would be set instead of
+   --  default header.
+   --  When Header is None, no header would be set for compressed data.
+
+   procedure Inflate_Init
+     (Filter      : in out Filter_Type;
+      Window_Bits : in     Window_Bits_Type := Default_Window_Bits;
+      Header      : in     Header_Type      := Default);
+   --  Decompressor initialization.
+   --  Default header type mean that ZLib default header is expecting in the
+   --  input compressed stream.
+   --  Header type None mean that no header is expecting in the input stream.
+   --  GZip header type mean that GZip header is expecting in the
+   --  input compressed stream.
+   --  Auto header type mean that header type (GZip or Native) would be
+   --  detected automatically in the input stream.
+   --  Note that header types parameter values None, GZip and Auto are
+   --  supported for inflate routine only in ZLib versions 1.2.0.2 and later.
+   --  Deflate_Init is supporting all header types.
+
+   function Is_Open (Filter : in Filter_Type) return Boolean;
+   pragma Inline (Is_Open);
+   --  Is the filter opened for compression or decompression.
+
+   procedure Close
+     (Filter       : in out Filter_Type;
+      Ignore_Error : in     Boolean := False);
+   --  Closing the compression or decompressor.
+   --  If stream is closing before the complete and Ignore_Error is False,
+   --  The exception would be raised.
+
+   generic
+      with procedure Data_In
+        (Item : out Ada.Streams.Stream_Element_Array;
+         Last : out Ada.Streams.Stream_Element_Offset);
+      with procedure Data_Out
+        (Item : in Ada.Streams.Stream_Element_Array);
+   procedure Generic_Translate
+     (Filter          : in out Filter_Type;
+      In_Buffer_Size  : in     Integer := Default_Buffer_Size;
+      Out_Buffer_Size : in     Integer := Default_Buffer_Size);
+   --  Compress/decompress data fetch from Data_In routine and pass the result
+   --  to the Data_Out routine. User should provide Data_In and Data_Out
+   --  for compression/decompression data flow.
+   --  Compression or decompression depend on Filter initialization.
+
+   function Total_In (Filter : in Filter_Type) return Count;
+   pragma Inline (Total_In);
+   --  Returns total number of input bytes read so far
+
+   function Total_Out (Filter : in Filter_Type) return Count;
+   pragma Inline (Total_Out);
+   --  Returns total number of bytes output so far
+
+   function CRC32
+     (CRC    : in Unsigned_32;
+      Data   : in Ada.Streams.Stream_Element_Array)
+      return Unsigned_32;
+   pragma Inline (CRC32);
+   --  Compute CRC32, it could be necessary for make gzip format
+
+   procedure CRC32
+     (CRC  : in out Unsigned_32;
+      Data : in     Ada.Streams.Stream_Element_Array);
+   pragma Inline (CRC32);
+   --  Compute CRC32, it could be necessary for make gzip format
+
+   -------------------------------------------------
+   --  Below is more complex low level routines.  --
+   -------------------------------------------------
+
+   procedure Translate
+     (Filter    : in out Filter_Type;
+      In_Data   : in     Ada.Streams.Stream_Element_Array;
+      In_Last   :    out Ada.Streams.Stream_Element_Offset;
+      Out_Data  :    out Ada.Streams.Stream_Element_Array;
+      Out_Last  :    out Ada.Streams.Stream_Element_Offset;
+      Flush     : in     Flush_Mode);
+   --  Compress/decompress the In_Data buffer and place the result into
+   --  Out_Data. In_Last is the index of last element from In_Data accepted by
+   --  the Filter. Out_Last is the last element of the received data from
+   --  Filter. To tell the filter that incoming data are complete put the
+   --  Flush parameter to Finish.
+
+   function Stream_End (Filter : in Filter_Type) return Boolean;
+   pragma Inline (Stream_End);
+   --  Return the true when the stream is complete.
+
+   procedure Flush
+     (Filter    : in out Filter_Type;
+      Out_Data  :    out Ada.Streams.Stream_Element_Array;
+      Out_Last  :    out Ada.Streams.Stream_Element_Offset;
+      Flush     : in     Flush_Mode);
+   pragma Inline (Flush);
+   --  Flushing the data from the compressor.
+
+   generic
+      with procedure Write
+        (Item : in Ada.Streams.Stream_Element_Array);
+      --  User should provide this routine for accept
+      --  compressed/decompressed data.
+
+      Buffer_Size : in Ada.Streams.Stream_Element_Offset
+         := Default_Buffer_Size;
+      --  Buffer size for Write user routine.
+
+   procedure Write
+     (Filter  : in out Filter_Type;
+      Item    : in     Ada.Streams.Stream_Element_Array;
+      Flush   : in     Flush_Mode := No_Flush);
+   --  Compress/Decompress data from Item to the generic parameter procedure
+   --  Write. Output buffer size could be set in Buffer_Size generic parameter.
+
+   generic
+      with procedure Read
+        (Item : out Ada.Streams.Stream_Element_Array;
+         Last : out Ada.Streams.Stream_Element_Offset);
+      --  User should provide data for compression/decompression
+      --  thru this routine.
+
+      Buffer : in out Ada.Streams.Stream_Element_Array;
+      --  Buffer for keep remaining data from the previous
+      --  back read.
+
+      Rest_First, Rest_Last : in out Ada.Streams.Stream_Element_Offset;
+      --  Rest_First have to be initialized to Buffer'Last + 1
+      --  Rest_Last have to be initialized to Buffer'Last
+      --  before usage.
+
+      Allow_Read_Some : in Boolean := False;
+      --  Is it allowed to return Last < Item'Last before end of data.
+
+   procedure Read
+     (Filter : in out Filter_Type;
+      Item   :    out Ada.Streams.Stream_Element_Array;
+      Last   :    out Ada.Streams.Stream_Element_Offset;
+      Flush  : in     Flush_Mode := No_Flush);
+   --  Compress/Decompress data from generic parameter procedure Read to the
+   --  Item. User should provide Buffer and initialized Rest_First, Rest_Last
+   --  indicators. If Allow_Read_Some is True, Read routines could return
+   --  Last < Item'Last only at end of stream.
+
+private
+
+   use Ada.Streams;
+
+   pragma Assert (Ada.Streams.Stream_Element'Size    =    8);
+   pragma Assert (Ada.Streams.Stream_Element'Modulus = 2**8);
+
+   type Flush_Mode is new Integer range 0 .. 5;
+
+   type Compression_Method is new Integer range 8 .. 8;
+
+   type Strategy_Type is new Integer range 0 .. 3;
+
+   No_Flush      : constant Flush_Mode := 0;
+   Partial_Flush : constant Flush_Mode := 1;
+   Sync_Flush    : constant Flush_Mode := 2;
+   Full_Flush    : constant Flush_Mode := 3;
+   Finish        : constant Flush_Mode := 4;
+   Block_Flush   : constant Flush_Mode := 5;
+
+   Filtered         : constant Strategy_Type := 1;
+   Huffman_Only     : constant Strategy_Type := 2;
+   RLE              : constant Strategy_Type := 3;
+   Default_Strategy : constant Strategy_Type := 0;
+
+   Deflated : constant Compression_Method := 8;
+
+   type Z_Stream;
+
+   type Z_Stream_Access is access all Z_Stream;
+
+   type Filter_Type is tagged limited record
+      Strm        : Z_Stream_Access;
+      Compression : Boolean;
+      Stream_End  : Boolean;
+      Header      : Header_Type;
+      CRC         : Unsigned_32;
+      Offset      : Stream_Element_Offset;
+      --  Offset for gzip header/footer output.
+   end record;
+
+end ZLib;

contrib/ada/zlib.gpr

@@ -0,0 +1,20 @@
+project Zlib is
+
+   for Languages use ("Ada");
+   for Source_Dirs use (".");
+   for Object_Dir use ".";
+   for Main use ("test.adb", "mtest.adb", "read.adb", "buffer_demo");
+
+   package Compiler is
+      for Default_Switches ("ada") use ("-gnatwcfilopru", "-gnatVcdfimorst", "-gnatyabcefhiklmnoprst");
+   end Compiler;
+
+   package Linker is
+      for Default_Switches ("ada") use ("-lz");
+   end Linker;
+
+   package Builder is
+      for Default_Switches ("ada") use ("-s", "-gnatQ");
+   end Builder;
+
+end Zlib;

contrib/amd64/amd64-match.S

@@ -0,0 +1,452 @@
+/*
+ * match.S -- optimized version of longest_match()
+ * based on the similar work by Gilles Vollant, and Brian Raiter, written 1998
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the BSD License. Use by owners of Che Guevarra
+ * parafernalia is prohibited, where possible, and highly discouraged
+ * elsewhere.
+ */
+
+#ifndef NO_UNDERLINE
+#	define	match_init	_match_init
+#	define	longest_match	_longest_match
+#endif
+
+#define	scanend		ebx
+#define	scanendw	bx
+#define	chainlenwmask	edx /* high word: current chain len low word: s->wmask */
+#define	curmatch	rsi
+#define	curmatchd	esi
+#define	windowbestlen	r8
+#define	scanalign	r9
+#define	scanalignd	r9d
+#define	window		r10
+#define	bestlen		r11
+#define	bestlend	r11d
+#define	scanstart	r12d
+#define	scanstartw	r12w
+#define scan		r13
+#define nicematch	r14d
+#define	limit		r15
+#define	limitd		r15d
+#define prev		rcx
+
+/*
+ * The 258 is a "magic number, not a parameter -- changing it
+ * breaks the hell loose
+ */
+#define	MAX_MATCH	(258)
+#define	MIN_MATCH	(3)
+#define	MIN_LOOKAHEAD	(MAX_MATCH + MIN_MATCH + 1)
+#define	MAX_MATCH_8	((MAX_MATCH + 7) & ~7)
+
+/* stack frame offsets */
+#define	LocalVarsSize	(112)
+#define _chainlenwmask	( 8-LocalVarsSize)(%rsp)
+#define _windowbestlen	(16-LocalVarsSize)(%rsp)
+#define save_r14        (24-LocalVarsSize)(%rsp)
+#define save_rsi        (32-LocalVarsSize)(%rsp)
+#define save_rbx        (40-LocalVarsSize)(%rsp)
+#define save_r12        (56-LocalVarsSize)(%rsp)
+#define save_r13        (64-LocalVarsSize)(%rsp)
+#define save_r15        (80-LocalVarsSize)(%rsp)
+
+
+.globl	match_init, longest_match
+
+/*
+ * On AMD64 the first argument of a function (in our case -- the pointer to
+ * deflate_state structure) is passed in %rdi, hence our offsets below are
+ * all off of that.
+ */
+
+/* you can check the structure offset by running
+
+#include <stdlib.h>
+#include <stdio.h>
+#include "deflate.h"
+
+void print_depl()
+{
+deflate_state ds;
+deflate_state *s=&ds;
+printf("size pointer=%u\n",(int)sizeof(void*));
+
+printf("#define dsWSize         (%3u)(%%rdi)\n",(int)(((char*)&(s->w_size))-((char*)s)));
+printf("#define dsWMask         (%3u)(%%rdi)\n",(int)(((char*)&(s->w_mask))-((char*)s)));
+printf("#define dsWindow        (%3u)(%%rdi)\n",(int)(((char*)&(s->window))-((char*)s)));
+printf("#define dsPrev          (%3u)(%%rdi)\n",(int)(((char*)&(s->prev))-((char*)s)));
+printf("#define dsMatchLen      (%3u)(%%rdi)\n",(int)(((char*)&(s->match_length))-((char*)s)));
+printf("#define dsPrevMatch     (%3u)(%%rdi)\n",(int)(((char*)&(s->prev_match))-((char*)s)));
+printf("#define dsStrStart      (%3u)(%%rdi)\n",(int)(((char*)&(s->strstart))-((char*)s)));
+printf("#define dsMatchStart    (%3u)(%%rdi)\n",(int)(((char*)&(s->match_start))-((char*)s)));
+printf("#define dsLookahead     (%3u)(%%rdi)\n",(int)(((char*)&(s->lookahead))-((char*)s)));
+printf("#define dsPrevLen       (%3u)(%%rdi)\n",(int)(((char*)&(s->prev_length))-((char*)s)));
+printf("#define dsMaxChainLen   (%3u)(%%rdi)\n",(int)(((char*)&(s->max_chain_length))-((char*)s)));
+printf("#define dsGoodMatch     (%3u)(%%rdi)\n",(int)(((char*)&(s->good_match))-((char*)s)));
+printf("#define dsNiceMatch     (%3u)(%%rdi)\n",(int)(((char*)&(s->nice_match))-((char*)s)));
+}
+
+*/
+
+
+/*
+  to compile for XCode 3.2 on MacOSX x86_64
+  - run "gcc -g -c -DXCODE_MAC_X64_STRUCTURE amd64-match.S"
+ */
+
+
+#ifndef CURRENT_LINX_XCODE_MAC_X64_STRUCTURE
+#define dsWSize		( 68)(%rdi)
+#define dsWMask		( 76)(%rdi)
+#define dsWindow	( 80)(%rdi)
+#define dsPrev		( 96)(%rdi)
+#define dsMatchLen	(144)(%rdi)
+#define dsPrevMatch	(148)(%rdi)
+#define dsStrStart	(156)(%rdi)
+#define dsMatchStart	(160)(%rdi)
+#define dsLookahead	(164)(%rdi)
+#define dsPrevLen	(168)(%rdi)
+#define dsMaxChainLen	(172)(%rdi)
+#define dsGoodMatch	(188)(%rdi)
+#define dsNiceMatch	(192)(%rdi)
+
+#else 
+
+#ifndef STRUCT_OFFSET
+#	define STRUCT_OFFSET	(0)
+#endif
+
+
+#define dsWSize		( 56 + STRUCT_OFFSET)(%rdi)
+#define dsWMask		( 64 + STRUCT_OFFSET)(%rdi)
+#define dsWindow	( 72 + STRUCT_OFFSET)(%rdi)
+#define dsPrev		( 88 + STRUCT_OFFSET)(%rdi)
+#define dsMatchLen	(136 + STRUCT_OFFSET)(%rdi)
+#define dsPrevMatch	(140 + STRUCT_OFFSET)(%rdi)
+#define dsStrStart	(148 + STRUCT_OFFSET)(%rdi)
+#define dsMatchStart	(152 + STRUCT_OFFSET)(%rdi)
+#define dsLookahead	(156 + STRUCT_OFFSET)(%rdi)
+#define dsPrevLen	(160 + STRUCT_OFFSET)(%rdi)
+#define dsMaxChainLen	(164 + STRUCT_OFFSET)(%rdi)
+#define dsGoodMatch	(180 + STRUCT_OFFSET)(%rdi)
+#define dsNiceMatch	(184 + STRUCT_OFFSET)(%rdi)
+
+#endif
+
+
+
+
+.text
+
+/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
+
+longest_match:
+/*
+ * Retrieve the function arguments. %curmatch will hold cur_match
+ * throughout the entire function (passed via rsi on amd64).
+ * rdi will hold the pointer to the deflate_state (first arg on amd64)
+ */
+		mov     %rsi, save_rsi
+		mov     %rbx, save_rbx
+		mov	%r12, save_r12
+		mov     %r13, save_r13
+		mov     %r14, save_r14
+		mov     %r15, save_r15
+
+/* uInt wmask = s->w_mask;						*/
+/* unsigned chain_length = s->max_chain_length;				*/
+/* if (s->prev_length >= s->good_match) {				*/
+/*     chain_length >>= 2;						*/
+/* }									*/
+
+		movl	dsPrevLen, %eax
+		movl	dsGoodMatch, %ebx
+		cmpl	%ebx, %eax
+		movl	dsWMask, %eax
+		movl	dsMaxChainLen, %chainlenwmask
+		jl	LastMatchGood
+		shrl	$2, %chainlenwmask
+LastMatchGood:
+
+/* chainlen is decremented once beforehand so that the function can	*/
+/* use the sign flag instead of the zero flag for the exit test.	*/
+/* It is then shifted into the high word, to make room for the wmask	*/
+/* value, which it will always accompany.				*/
+
+		decl	%chainlenwmask
+		shll	$16, %chainlenwmask
+		orl	%eax, %chainlenwmask
+
+/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;	*/
+
+		movl	dsNiceMatch, %eax
+		movl	dsLookahead, %ebx
+		cmpl	%eax, %ebx
+		jl	LookaheadLess
+		movl	%eax, %ebx
+LookaheadLess:	movl	%ebx, %nicematch
+
+/* register Bytef *scan = s->window + s->strstart;			*/
+
+		mov	dsWindow, %window
+		movl	dsStrStart, %limitd
+		lea	(%limit, %window), %scan
+
+/* Determine how many bytes the scan ptr is off from being		*/
+/* dword-aligned.							*/
+
+		mov	%scan, %scanalign
+		negl	%scanalignd
+		andl	$3, %scanalignd
+
+/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ?			*/
+/*     s->strstart - (IPos)MAX_DIST(s) : NIL;				*/
+
+		movl	dsWSize, %eax
+		subl	$MIN_LOOKAHEAD, %eax
+		xorl	%ecx, %ecx
+		subl	%eax, %limitd
+		cmovng	%ecx, %limitd
+
+/* int best_len = s->prev_length;					*/
+
+		movl	dsPrevLen, %bestlend
+
+/* Store the sum of s->window + best_len in %windowbestlen locally, and in memory.	*/
+
+		lea	(%window, %bestlen), %windowbestlen
+		mov	%windowbestlen, _windowbestlen
+
+/* register ush scan_start = *(ushf*)scan;				*/
+/* register ush scan_end   = *(ushf*)(scan+best_len-1);			*/
+/* Posf *prev = s->prev;						*/
+
+		movzwl	(%scan), %scanstart
+		movzwl	-1(%scan, %bestlen), %scanend
+		mov	dsPrev, %prev
+
+/* Jump into the main loop.						*/
+
+		movl	%chainlenwmask, _chainlenwmask
+		jmp	LoopEntry
+
+.balign 16
+
+/* do {
+ *     match = s->window + cur_match;
+ *     if (*(ushf*)(match+best_len-1) != scan_end ||
+ *         *(ushf*)match != scan_start) continue;
+ *     [...]
+ * } while ((cur_match = prev[cur_match & wmask]) > limit
+ *          && --chain_length != 0);
+ *
+ * Here is the inner loop of the function. The function will spend the
+ * majority of its time in this loop, and majority of that time will
+ * be spent in the first ten instructions.
+ */
+LookupLoop:
+		andl	%chainlenwmask, %curmatchd
+		movzwl	(%prev, %curmatch, 2), %curmatchd
+		cmpl	%limitd, %curmatchd
+		jbe	LeaveNow
+		subl	$0x00010000, %chainlenwmask
+		js	LeaveNow
+LoopEntry:	cmpw	-1(%windowbestlen, %curmatch), %scanendw
+		jne	LookupLoop
+		cmpw	%scanstartw, (%window, %curmatch)
+		jne	LookupLoop
+
+/* Store the current value of chainlen.					*/
+		movl	%chainlenwmask, _chainlenwmask
+
+/* %scan is the string under scrutiny, and %prev to the string we	*/
+/* are hoping to match it up with. In actuality, %esi and %edi are	*/
+/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is	*/
+/* initialized to -(MAX_MATCH_8 - scanalign).				*/
+
+		mov	$(-MAX_MATCH_8), %rdx
+		lea	(%curmatch, %window), %windowbestlen
+		lea	MAX_MATCH_8(%windowbestlen, %scanalign), %windowbestlen
+		lea	MAX_MATCH_8(%scan, %scanalign), %prev
+
+/* the prefetching below makes very little difference... */
+		prefetcht1	(%windowbestlen, %rdx)
+		prefetcht1	(%prev, %rdx)
+
+/*
+ * Test the strings for equality, 8 bytes at a time. At the end,
+ * adjust %rdx so that it is offset to the exact byte that mismatched.
+ *
+ * It should be confessed that this loop usually does not represent
+ * much of the total running time. Replacing it with a more
+ * straightforward "rep cmpsb" would not drastically degrade
+ * performance -- unrolling it, for example, makes no difference.
+ */
+
+#undef USE_SSE	/* works, but is 6-7% slower, than non-SSE... */
+
+LoopCmps:
+#ifdef USE_SSE
+		/* Preload the SSE registers */
+		movdqu	  (%windowbestlen, %rdx), %xmm1
+		movdqu	  (%prev, %rdx), %xmm2
+		pcmpeqb	%xmm2, %xmm1
+		movdqu	16(%windowbestlen, %rdx), %xmm3
+		movdqu	16(%prev, %rdx), %xmm4
+		pcmpeqb	%xmm4, %xmm3
+		movdqu	32(%windowbestlen, %rdx), %xmm5
+		movdqu	32(%prev, %rdx), %xmm6
+		pcmpeqb	%xmm6, %xmm5
+		movdqu	48(%windowbestlen, %rdx), %xmm7
+		movdqu	48(%prev, %rdx), %xmm8
+		pcmpeqb	%xmm8, %xmm7
+
+		/* Check the comparisions' results */
+		pmovmskb %xmm1, %rax
+		notw	%ax
+		bsfw	%ax, %ax
+		jnz	LeaveLoopCmps
+		
+		/* this is the only iteration of the loop with a possibility of having
+		   incremented rdx by 0x108 (each loop iteration add 16*4 = 0x40 
+		   and (0x40*4)+8=0x108 */
+		add	$8, %rdx
+		jz LenMaximum
+		add	$8, %rdx
+
+		
+		pmovmskb %xmm3, %rax
+		notw	%ax
+		bsfw	%ax, %ax
+		jnz	LeaveLoopCmps
+		
+		
+		add	$16, %rdx
+
+
+		pmovmskb %xmm5, %rax
+		notw	%ax
+		bsfw	%ax, %ax
+		jnz	LeaveLoopCmps
+		
+		add	$16, %rdx
+
+
+		pmovmskb %xmm7, %rax
+		notw	%ax
+		bsfw	%ax, %ax
+		jnz	LeaveLoopCmps
+		
+		add	$16, %rdx
+		
+		jmp	LoopCmps
+LeaveLoopCmps:	add	%rax, %rdx
+#else
+		mov	(%windowbestlen, %rdx), %rax
+		xor	(%prev, %rdx), %rax
+		jnz	LeaveLoopCmps
+		
+		mov	8(%windowbestlen, %rdx), %rax
+		xor	8(%prev, %rdx), %rax
+		jnz	LeaveLoopCmps8
+
+		mov	16(%windowbestlen, %rdx), %rax
+		xor	16(%prev, %rdx), %rax
+		jnz	LeaveLoopCmps16
+				
+		add	$24, %rdx
+		jnz	LoopCmps
+		jmp	LenMaximum
+#	if 0
+/*
+ * This three-liner is tantalizingly simple, but bsf is a slow instruction,
+ * and the complicated alternative down below is quite a bit faster. Sad...
+ */
+
+LeaveLoopCmps:	bsf	%rax, %rax /* find the first non-zero bit */
+		shrl	$3, %eax /* divide by 8 to get the byte */
+		add	%rax, %rdx
+#	else
+LeaveLoopCmps16:
+		add	$8, %rdx
+LeaveLoopCmps8:
+		add	$8, %rdx
+LeaveLoopCmps:	testl   $0xFFFFFFFF, %eax /* Check the first 4 bytes */
+		jnz     Check16
+		add     $4, %rdx
+		shr     $32, %rax
+Check16:        testw   $0xFFFF, %ax
+		jnz     LenLower
+		add	$2, %rdx
+		shrl	$16, %eax
+LenLower:	subb	$1, %al
+		adc	$0, %rdx
+#	endif
+#endif
+
+/* Calculate the length of the match. If it is longer than MAX_MATCH,	*/
+/* then automatically accept it as the best possible match and leave.	*/
+
+		lea	(%prev, %rdx), %rax
+		sub	%scan, %rax
+		cmpl	$MAX_MATCH, %eax
+		jge	LenMaximum
+
+/* If the length of the match is not longer than the best match we	*/
+/* have so far, then forget it and return to the lookup loop.		*/
+
+		cmpl	%bestlend, %eax
+		jg	LongerMatch
+		mov	_windowbestlen, %windowbestlen
+		mov	dsPrev, %prev
+		movl	_chainlenwmask, %edx
+		jmp	LookupLoop
+
+/*         s->match_start = cur_match;					*/
+/*         best_len = len;						*/
+/*         if (len >= nice_match) break;				*/
+/*         scan_end = *(ushf*)(scan+best_len-1);			*/
+
+LongerMatch:
+		movl	%eax, %bestlend
+		movl	%curmatchd, dsMatchStart
+		cmpl	%nicematch, %eax
+		jge	LeaveNow
+
+		lea	(%window, %bestlen), %windowbestlen
+		mov	%windowbestlen, _windowbestlen
+
+		movzwl	-1(%scan, %rax), %scanend
+		mov	dsPrev, %prev
+		movl	_chainlenwmask, %chainlenwmask
+		jmp	LookupLoop
+
+/* Accept the current string, with the maximum possible length.		*/
+
+LenMaximum:
+		movl	$MAX_MATCH, %bestlend
+		movl	%curmatchd, dsMatchStart
+
+/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len;		*/
+/* return s->lookahead;							*/
+
+LeaveNow:
+		movl	dsLookahead, %eax
+		cmpl	%eax, %bestlend
+		cmovngl	%bestlend, %eax
+LookaheadRet:
+
+/* Restore the registers and return from whence we came.			*/
+
+	mov	save_rsi, %rsi
+	mov	save_rbx, %rbx
+	mov	save_r12, %r12
+	mov	save_r13, %r13
+	mov	save_r14, %r14
+	mov	save_r15, %r15
+
+	ret
+
+match_init:	ret

contrib/asm386/gvmat32.asm

@@ -1,559 +0,0 @@
-;
-; gvmat32.asm -- Asm portion of the optimized longest_match for 32 bits x86
-; Copyright (C) 1995-1996 Jean-loup Gailly and Gilles Vollant.
-; File written by Gilles Vollant, by modifiying the longest_match
-;  from Jean-loup Gailly in deflate.c
-; It need wmask == 0x7fff
-;     (assembly code is faster with a fixed wmask)
-;
-; For Visual C++ 4.2 and ML 6.11c (version in directory \MASM611C of Win95 DDK)
-;   I compile with : "ml /coff /Zi /c gvmat32.asm"
-;
-
-;uInt longest_match_7fff(s, cur_match)
-;    deflate_state *s;
-;    IPos cur_match;                             /* current match */
-
-        NbStack         equ     76
-        cur_match       equ     dword ptr[esp+NbStack-0]
-        str_s           equ     dword ptr[esp+NbStack-4]
-; 5 dword on top (ret,ebp,esi,edi,ebx)
-        adrret          equ     dword ptr[esp+NbStack-8]
-        pushebp         equ     dword ptr[esp+NbStack-12]
-        pushedi         equ     dword ptr[esp+NbStack-16]
-        pushesi         equ     dword ptr[esp+NbStack-20]
-        pushebx         equ     dword ptr[esp+NbStack-24]
-
-        chain_length    equ     dword ptr [esp+NbStack-28]
-        limit           equ     dword ptr [esp+NbStack-32]
-        best_len        equ     dword ptr [esp+NbStack-36]
-        window          equ     dword ptr [esp+NbStack-40]
-        prev            equ     dword ptr [esp+NbStack-44]
-        scan_start      equ      word ptr [esp+NbStack-48]
-        wmask           equ     dword ptr [esp+NbStack-52]
-        match_start_ptr equ     dword ptr [esp+NbStack-56]
-        nice_match      equ     dword ptr [esp+NbStack-60]
-        scan            equ     dword ptr [esp+NbStack-64]
-
-        windowlen       equ     dword ptr [esp+NbStack-68]
-        match_start     equ     dword ptr [esp+NbStack-72]
-        strend          equ     dword ptr [esp+NbStack-76]
-        NbStackAdd      equ     (NbStack-24)
-
-    .386p
-
-    name    gvmatch
-    .MODEL  FLAT
-
-
-
-;  all the +4 offsets are due to the addition of pending_buf_size (in zlib
-;  in the deflate_state structure since the asm code was first written
-;  (if you compile with zlib 1.0.4 or older, remove the +4).
-;  Note : these value are good with a 8 bytes boundary pack structure
-    dep_chain_length    equ     70h+4
-    dep_window          equ     2ch+4
-    dep_strstart        equ     60h+4
-    dep_prev_length     equ     6ch+4
-    dep_nice_match      equ     84h+4
-    dep_w_size          equ     20h+4
-    dep_prev            equ     34h+4
-    dep_w_mask          equ     28h+4
-    dep_good_match      equ     80h+4
-    dep_match_start     equ     64h+4
-    dep_lookahead       equ     68h+4
-
-
-_TEXT                   segment
-
-IFDEF NOUNDERLINE
-                        public  longest_match_7fff
-;                        public  match_init
-ELSE
-                        public  _longest_match_7fff
-;                        public  _match_init
-ENDIF
-
-    MAX_MATCH           equ     258
-    MIN_MATCH           equ     3
-    MIN_LOOKAHEAD       equ     (MAX_MATCH+MIN_MATCH+1)
-
-
-
-IFDEF NOUNDERLINE
-;match_init      proc near
-;                ret
-;match_init      endp
-ELSE
-;_match_init     proc near
-;                ret
-;_match_init     endp
-ENDIF
-
-
-IFDEF NOUNDERLINE
-longest_match_7fff   proc near
-ELSE
-_longest_match_7fff  proc near
-ENDIF
-
-        mov     edx,[esp+4]
-
-
-
-        push    ebp
-        push    edi
-        push    esi
-        push    ebx
-
-        sub     esp,NbStackAdd
-
-; initialize or check the variables used in match.asm.
-        mov     ebp,edx
-
-; chain_length = s->max_chain_length
-; if (prev_length>=good_match) chain_length >>= 2
-        mov     edx,[ebp+dep_chain_length]
-        mov     ebx,[ebp+dep_prev_length]
-        cmp     [ebp+dep_good_match],ebx
-        ja      noshr
-        shr     edx,2
-noshr:
-; we increment chain_length because in the asm, the --chain_lenght is in the beginning of the loop
-        inc     edx
-        mov     edi,[ebp+dep_nice_match]
-        mov     chain_length,edx
-        mov     eax,[ebp+dep_lookahead]
-        cmp     eax,edi
-; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
-        jae     nolookaheadnicematch
-        mov     edi,eax
-nolookaheadnicematch:
-; best_len = s->prev_length
-        mov     best_len,ebx
-
-; window = s->window
-        mov     esi,[ebp+dep_window]
-        mov     ecx,[ebp+dep_strstart]
-        mov     window,esi
-
-        mov     nice_match,edi
-; scan = window + strstart
-        add     esi,ecx
-        mov     scan,esi
-; dx = *window
-        mov     dx,word ptr [esi]
-; bx = *(window+best_len-1)
-        mov     bx,word ptr [esi+ebx-1]
-        add     esi,MAX_MATCH-1
-; scan_start = *scan
-        mov     scan_start,dx
-; strend = scan + MAX_MATCH-1
-        mov     strend,esi
-; bx = scan_end = *(window+best_len-1)
-
-;    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
-;        s->strstart - (IPos)MAX_DIST(s) : NIL;
-
-        mov     esi,[ebp+dep_w_size]
-        sub     esi,MIN_LOOKAHEAD
-; here esi = MAX_DIST(s)
-        sub     ecx,esi
-        ja      nodist
-        xor     ecx,ecx
-nodist:
-        mov     limit,ecx
-
-; prev = s->prev
-        mov     edx,[ebp+dep_prev]
-        mov     prev,edx
-
-;
-        mov     edx,dword ptr [ebp+dep_match_start]
-        mov     bp,scan_start
-        mov     eax,cur_match
-        mov     match_start,edx
-
-        mov     edx,window
-        mov     edi,edx
-        add     edi,best_len
-        mov     esi,prev
-        dec     edi
-; windowlen = window + best_len -1
-        mov     windowlen,edi
-
-        jmp     beginloop2
-        align   4
-
-; here, in the loop
-;       eax = ax = cur_match
-;       ecx = limit
-;        bx = scan_end
-;        bp = scan_start
-;       edi = windowlen (window + best_len -1)
-;       esi = prev
-
-
-;// here; chain_length <=16
-normalbeg0add16:
-        add     chain_length,16
-        jz      exitloop
-normalbeg0:
-        cmp     word ptr[edi+eax],bx
-        je      normalbeg2noroll
-rcontlabnoroll:
-; cur_match = prev[cur_match & wmask]
-        and     eax,7fffh
-        mov     ax,word ptr[esi+eax*2]
-; if cur_match > limit, go to exitloop
-        cmp     ecx,eax
-        jnb     exitloop
-; if --chain_length != 0, go to exitloop
-        dec     chain_length
-        jnz     normalbeg0
-        jmp     exitloop
-
-normalbeg2noroll:
-; if (scan_start==*(cur_match+window)) goto normalbeg2
-        cmp     bp,word ptr[edx+eax]
-        jne     rcontlabnoroll
-        jmp     normalbeg2
-
-contloop3:
-        mov     edi,windowlen
-
-; cur_match = prev[cur_match & wmask]
-        and     eax,7fffh
-        mov     ax,word ptr[esi+eax*2]
-; if cur_match > limit, go to exitloop
-        cmp     ecx,eax
-jnbexitloopshort1:
-        jnb     exitloop
-; if --chain_length != 0, go to exitloop
-
-
-; begin the main loop
-beginloop2:
-        sub     chain_length,16+1
-; if chain_length <=16, don't use the unrolled loop
-        jna     normalbeg0add16
-
-do16:
-        cmp     word ptr[edi+eax],bx
-        je      normalbeg2dc0
-
-maccn   MACRO   lab
-        and     eax,7fffh
-        mov     ax,word ptr[esi+eax*2]
-        cmp     ecx,eax
-        jnb     exitloop
-        cmp     word ptr[edi+eax],bx
-        je      lab
-        ENDM
-
-rcontloop0:
-        maccn   normalbeg2dc1
-
-rcontloop1:
-        maccn   normalbeg2dc2
-
-rcontloop2:
-        maccn   normalbeg2dc3
-
-rcontloop3:
-        maccn   normalbeg2dc4
-
-rcontloop4:
-        maccn   normalbeg2dc5
-
-rcontloop5:
-        maccn   normalbeg2dc6
-
-rcontloop6:
-        maccn   normalbeg2dc7
-
-rcontloop7:
-        maccn   normalbeg2dc8
-
-rcontloop8:
-        maccn   normalbeg2dc9
-
-rcontloop9:
-        maccn   normalbeg2dc10
-
-rcontloop10:
-        maccn   short normalbeg2dc11
-
-rcontloop11:
-        maccn   short normalbeg2dc12
-
-rcontloop12:
-        maccn   short normalbeg2dc13
-
-rcontloop13:
-        maccn   short normalbeg2dc14
-
-rcontloop14:
-        maccn   short normalbeg2dc15
-
-rcontloop15:
-        and     eax,7fffh
-        mov     ax,word ptr[esi+eax*2]
-        cmp     ecx,eax
-        jnb     exitloop
-
-        sub     chain_length,16
-        ja      do16
-        jmp     normalbeg0add16
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-normbeg MACRO   rcontlab,valsub
-; if we are here, we know that *(match+best_len-1) == scan_end
-        cmp     bp,word ptr[edx+eax]
-; if (match != scan_start) goto rcontlab
-        jne     rcontlab
-; calculate the good chain_length, and we'll compare scan and match string
-        add     chain_length,16-valsub
-        jmp     iseq
-        ENDM
-
-
-normalbeg2dc11:
-        normbeg rcontloop11,11
-
-normalbeg2dc12:
-        normbeg short rcontloop12,12
-
-normalbeg2dc13:
-        normbeg short rcontloop13,13
-
-normalbeg2dc14:
-        normbeg short rcontloop14,14
-
-normalbeg2dc15:
-        normbeg short rcontloop15,15
-
-normalbeg2dc10:
-        normbeg rcontloop10,10
-
-normalbeg2dc9:
-        normbeg rcontloop9,9
-
-normalbeg2dc8:
-        normbeg rcontloop8,8
-
-normalbeg2dc7:
-        normbeg rcontloop7,7
-
-normalbeg2dc6:
-        normbeg rcontloop6,6
-
-normalbeg2dc5:
-        normbeg rcontloop5,5
-
-normalbeg2dc4:
-        normbeg rcontloop4,4
-
-normalbeg2dc3:
-        normbeg rcontloop3,3
-
-normalbeg2dc2:
-        normbeg rcontloop2,2
-
-normalbeg2dc1:
-        normbeg rcontloop1,1
-
-normalbeg2dc0:
-        normbeg rcontloop0,0
-
-
-; we go in normalbeg2 because *(ushf*)(match+best_len-1) == scan_end
-
-normalbeg2:
-        mov     edi,window
-
-        cmp     bp,word ptr[edi+eax]
-        jne     contloop3                   ; if *(ushf*)match != scan_start, continue
-
-iseq:
-; if we are here, we know that *(match+best_len-1) == scan_end
-; and (match == scan_start)
-
-        mov     edi,edx
-        mov     esi,scan                    ; esi = scan
-        add     edi,eax                     ; edi = window + cur_match = match
-
-        mov     edx,[esi+3]                 ; compare manually dword at match+3
-        xor     edx,[edi+3]                 ; and scan +3
-
-        jz      begincompare                ; if equal, go to long compare
-
-; we will determine the unmatch byte and calculate len (in esi)
-        or      dl,dl
-        je      eq1rr
-        mov     esi,3
-        jmp     trfinval
-eq1rr:
-        or      dx,dx
-        je      eq1
-
-        mov     esi,4
-        jmp     trfinval
-eq1:
-        and     edx,0ffffffh
-        jz      eq11
-        mov     esi,5
-        jmp     trfinval
-eq11:
-        mov     esi,6
-        jmp     trfinval
-
-begincompare:
-        ; here we now scan and match begin same
-        add     edi,6
-        add     esi,6
-        mov     ecx,(MAX_MATCH-(2+4))/4     ; scan for at most MAX_MATCH bytes
-        repe    cmpsd                       ; loop until mismatch
-
-        je      trfin                       ; go to trfin if not unmatch
-; we determine the unmatch byte
-        sub     esi,4
-        mov     edx,[edi-4]
-        xor     edx,[esi]
-
-        or      dl,dl
-        jnz     trfin
-        inc     esi
-
-        or      dx,dx
-        jnz     trfin
-        inc     esi
-
-        and     edx,0ffffffh
-        jnz     trfin
-        inc     esi
-
-trfin:
-        sub     esi,scan          ; esi = len
-trfinval:
-; here we have finised compare, and esi contain len of equal string
-        cmp     esi,best_len        ; if len > best_len, go newbestlen
-        ja      short newbestlen
-; now we restore edx, ecx and esi, for the big loop
-        mov     esi,prev
-        mov     ecx,limit
-        mov     edx,window
-        jmp     contloop3
-
-newbestlen:
-        mov     best_len,esi        ; len become best_len
-
-        mov     match_start,eax     ; save new position as match_start
-        cmp     esi,nice_match      ; if best_len >= nice_match, exit
-        jae     exitloop
-        mov     ecx,scan
-        mov     edx,window          ; restore edx=window
-        add     ecx,esi
-        add     esi,edx
-
-        dec     esi
-        mov     windowlen,esi       ; windowlen = window + best_len-1
-        mov     bx,[ecx-1]          ; bx = *(scan+best_len-1) = scan_end
-
-; now we restore ecx and esi, for the big loop :
-        mov     esi,prev
-        mov     ecx,limit
-        jmp     contloop3
-
-exitloop:
-; exit : s->match_start=match_start
-        mov     ebx,match_start
-        mov     ebp,str_s
-        mov     ecx,best_len
-        mov     dword ptr [ebp+dep_match_start],ebx        
-        mov     eax,dword ptr [ebp+dep_lookahead]
-        cmp     ecx,eax
-        ja      minexlo
-        mov     eax,ecx
-minexlo:
-; return min(best_len,s->lookahead)
-        
-; restore stack and register ebx,esi,edi,ebp
-        add     esp,NbStackAdd
-
-        pop     ebx
-        pop     esi
-        pop     edi
-        pop     ebp
-        ret
-InfoAuthor:
-; please don't remove this string !
-; Your are free use gvmat32 in any fre or commercial apps if you don't remove the string in the binary!
-        db     0dh,0ah,"GVMat32 optimised assembly code written 1996-98 by Gilles Vollant",0dh,0ah
-
-
-
-IFDEF NOUNDERLINE
-longest_match_7fff   endp
-ELSE
-_longest_match_7fff  endp
-ENDIF
-
-
-IFDEF NOUNDERLINE
-cpudetect32     proc near
-ELSE
-_cpudetect32    proc near
-ENDIF
-
-
-	pushfd                  ; push original EFLAGS
-	pop     eax             ; get original EFLAGS
-	mov     ecx, eax        ; save original EFLAGS
-	xor     eax, 40000h     ; flip AC bit in EFLAGS
-	push    eax             ; save new EFLAGS value on stack
-	popfd                   ; replace current EFLAGS value
-	pushfd                  ; get new EFLAGS
-	pop     eax             ; store new EFLAGS in EAX
-	xor     eax, ecx        ; can<61>t toggle AC bit, processor=80386
-	jz      end_cpu_is_386  ; jump if 80386 processor
-	push    ecx
-	popfd                   ; restore AC bit in EFLAGS first
-
-	pushfd
-	pushfd
-	pop     ecx
-			
-	mov     eax, ecx        ; get original EFLAGS
-	xor     eax, 200000h    ; flip ID bit in EFLAGS
-	push    eax             ; save new EFLAGS value on stack
-	popfd                   ; replace current EFLAGS value
-	pushfd                  ; get new EFLAGS
-	pop		eax	            ; store new EFLAGS in EAX
-	popfd                   ; restore original EFLAGS
-	xor		eax, ecx        ; can<61>t toggle ID bit,
-	je		is_old_486		; processor=old
-
-	mov     eax,1
-	db      0fh,0a2h        ;CPUID   
-
-exitcpudetect:
-	ret
-
-end_cpu_is_386:
-	mov     eax,0300h
-	jmp     exitcpudetect
-
-is_old_486:
-	mov     eax,0400h
-	jmp     exitcpudetect
-
-IFDEF NOUNDERLINE
-cpudetect32     endp
-ELSE
-_cpudetect32    endp
-ENDIF
-
-_TEXT   ends
-end

contrib/asm386/gvmat32c.c

@@ -1,200 +0,0 @@
-/* gvmat32.c -- C portion of the optimized longest_match for 32 bits x86
- * Copyright (C) 1995-1996 Jean-loup Gailly and Gilles Vollant.
- * File written by Gilles Vollant, by modifiying the longest_match
- *  from Jean-loup Gailly in deflate.c
- *  it prepare all parameters and call the assembly longest_match_gvasm
- *  longest_match execute standard C code is wmask != 0x7fff
- *     (assembly code is faster with a fixed wmask)
- *
- */
-
-#include "deflate.h"
-
-#undef FAR
-#include <windows.h>
-
-#ifdef ASMV
-#define NIL 0
-
-#define UNALIGNED_OK
-
-
-/* if your C compiler don't add underline before function name,
-		define ADD_UNDERLINE_ASMFUNC */
-#ifdef ADD_UNDERLINE_ASMFUNC
-#define longest_match_7fff _longest_match_7fff
-#endif
-
-
-
-void match_init()
-{
-}
-
-unsigned long cpudetect32();
-
-uInt longest_match_c(
-    deflate_state *s,
-    IPos cur_match);                             /* current match */
-
-
-uInt longest_match_7fff(
-    deflate_state *s,
-    IPos cur_match);                             /* current match */
-
-uInt longest_match(
-    deflate_state *s,
-    IPos cur_match)                             /* current match */
-{
-	static uInt iIsPPro=2;
-
-    if ((s->w_mask == 0x7fff) && (iIsPPro==0))
-        return longest_match_7fff(s,cur_match);
-
-	if (iIsPPro==2)
-		iIsPPro = (((cpudetect32()/0x100)&0xf)>=6) ? 1 : 0;
-
-	return longest_match_c(s,cur_match);
-}
-
-
-
-uInt longest_match_c(s, cur_match)
-    deflate_state *s;
-    IPos cur_match;                             /* current match */
-{
-    unsigned chain_length = s->max_chain_length;/* max hash chain length */
-    register Bytef *scan = s->window + s->strstart; /* current string */
-    register Bytef *match;                       /* matched string */
-    register int len;                           /* length of current match */
-    int best_len = s->prev_length;              /* best match length so far */
-    int nice_match = s->nice_match;             /* stop if match long enough */
-    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
-        s->strstart - (IPos)MAX_DIST(s) : NIL;
-    /* Stop when cur_match becomes <= limit. To simplify the code,
-     * we prevent matches with the string of window index 0.
-     */
-    Posf *prev = s->prev;
-    uInt wmask = s->w_mask;
-
-#ifdef UNALIGNED_OK
-    /* Compare two bytes at a time. Note: this is not always beneficial.
-     * Try with and without -DUNALIGNED_OK to check.
-     */
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
-    register ush scan_start = *(ushf*)scan;
-    register ush scan_end   = *(ushf*)(scan+best_len-1);
-#else
-    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
-    register Byte scan_end1  = scan[best_len-1];
-    register Byte scan_end   = scan[best_len];
-#endif
-
-    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
-     * It is easy to get rid of this optimization if necessary.
-     */
-    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
-
-    /* Do not waste too much time if we already have a good match: */
-    if (s->prev_length >= s->good_match) {
-        chain_length >>= 2;
-    }
-    /* Do not look for matches beyond the end of the input. This is necessary
-     * to make deflate deterministic.
-     */
-    if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
-
-    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
-
-    do {
-        Assert(cur_match < s->strstart, "no future");
-        match = s->window + cur_match;
-
-        /* Skip to next match if the match length cannot increase
-         * or if the match length is less than 2:
-         */
-#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
-        /* This code assumes sizeof(unsigned short) == 2. Do not use
-         * UNALIGNED_OK if your compiler uses a different size.
-         */
-        if (*(ushf*)(match+best_len-1) != scan_end ||
-            *(ushf*)match != scan_start) continue;
-
-        /* It is not necessary to compare scan[2] and match[2] since they are
-         * always equal when the other bytes match, given that the hash keys
-         * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
-         * strstart+3, +5, ... up to strstart+257. We check for insufficient
-         * lookahead only every 4th comparison; the 128th check will be made
-         * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
-         * necessary to put more guard bytes at the end of the window, or
-         * to check more often for insufficient lookahead.
-         */
-        Assert(scan[2] == match[2], "scan[2]?");
-        scan++, match++;
-        do {
-        } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
-                 scan < strend);
-        /* The funny "do {}" generates better code on most compilers */
-
-        /* Here, scan <= window+strstart+257 */
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-        if (*scan == *match) scan++;
-
-        len = (MAX_MATCH - 1) - (int)(strend-scan);
-        scan = strend - (MAX_MATCH-1);
-
-#else /* UNALIGNED_OK */
-
-        if (match[best_len]   != scan_end  ||
-            match[best_len-1] != scan_end1 ||
-            *match            != *scan     ||
-            *++match          != scan[1])      continue;
-
-        /* The check at best_len-1 can be removed because it will be made
-         * again later. (This heuristic is not always a win.)
-         * It is not necessary to compare scan[2] and match[2] since they
-         * are always equal when the other bytes match, given that
-         * the hash keys are equal and that HASH_BITS >= 8.
-         */
-        scan += 2, match++;
-        Assert(*scan == *match, "match[2]?");
-
-        /* We check for insufficient lookahead only every 8th comparison;
-         * the 256th check will be made at strstart+258.
-         */
-        do {
-        } while (*++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 *++scan == *++match && *++scan == *++match &&
-                 scan < strend);
-
-        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
-
-        len = MAX_MATCH - (int)(strend - scan);
-        scan = strend - MAX_MATCH;
-
-#endif /* UNALIGNED_OK */
-
-        if (len > best_len) {
-            s->match_start = cur_match;
-            best_len = len;
-            if (len >= nice_match) break;
-#ifdef UNALIGNED_OK
-            scan_end = *(ushf*)(scan+best_len-1);
-#else
-            scan_end1  = scan[best_len-1];
-            scan_end   = scan[best_len];
-#endif
-        }
-    } while ((cur_match = prev[cur_match & wmask]) > limit
-             && --chain_length != 0);
-
-    if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
-    return s->lookahead;
-}
-
-#endif /* ASMV */

contrib/asm386/mkgvmt32.bat

@@ -1 +0,0 @@
-c:\masm611\bin\ml /coff /Zi /c /Flgvmat32.lst gvmat32.asm

contrib/asm386/zlibvc.def

@@ -1,74 +0,0 @@
-LIBRARY		"zlib"
-
-DESCRIPTION	'"""zlib data compression library"""'
-
-
-VERSION		1.11
-
-
-HEAPSIZE	1048576,8192
-
-EXPORTS
-    adler32                        @1
-    compress                       @2
-    crc32                          @3
-    deflate                        @4
-    deflateCopy                    @5
-    deflateEnd                     @6
-    deflateInit2_                  @7
-    deflateInit_                   @8
-    deflateParams                  @9
-    deflateReset                   @10
-    deflateSetDictionary           @11
-    gzclose                        @12
-    gzdopen                        @13
-    gzerror                        @14
-    gzflush                        @15
-    gzopen                         @16
-    gzread                         @17
-    gzwrite                        @18
-    inflate                        @19
-    inflateEnd                     @20
-    inflateInit2_                  @21
-    inflateInit_                   @22
-    inflateReset                   @23
-    inflateSetDictionary           @24
-    inflateSync                    @25
-    uncompress                     @26
-    zlibVersion                    @27
-    gzprintf                       @28
-    gzputc                         @29
-    gzgetc                         @30
-    gzseek                         @31
-    gzrewind                       @32
-    gztell                         @33
-    gzeof                          @34
-    gzsetparams                    @35
-    zError                         @36
-    inflateSyncPoint               @37
-    get_crc_table                  @38
-    compress2                      @39
-    gzputs                         @40
-    gzgets                         @41
-
-	unzOpen                       @61
-	unzClose                      @62
-	unzGetGlobalInfo              @63
-	unzGetCurrentFileInfo         @64
-	unzGoToFirstFile              @65
-	unzGoToNextFile               @66
-	unzOpenCurrentFile            @67
-	unzReadCurrentFile            @68
-	unztell                       @70
-	unzeof                        @71
-	unzCloseCurrentFile           @72
-	unzGetGlobalComment           @73
-	unzStringFileNameCompare      @74
-	unzLocateFile                 @75
-	unzGetLocalExtrafield         @76
-
-	zipOpen                       @80
-	zipOpenNewFileInZip           @81
-	zipWriteInFileInZip           @82
-	zipCloseFileInZip             @83
-	zipClose                      @84

contrib/asm386/zlibvc.dsp

@@ -1,651 +0,0 @@
-# Microsoft Developer Studio Project File - Name="zlibvc" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 5.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102
-# TARGTYPE "Win32 (ALPHA) Dynamic-Link Library" 0x0602
-
-CFG=zlibvc - Win32 Release
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE 
-!MESSAGE NMAKE /f "zlibvc.mak".
-!MESSAGE 
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE 
-!MESSAGE NMAKE /f "zlibvc.mak" CFG="zlibvc - Win32 Release"
-!MESSAGE 
-!MESSAGE Possible choices for configuration are:
-!MESSAGE 
-!MESSAGE "zlibvc - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library")
-!MESSAGE "zlibvc - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library")
-!MESSAGE "zlibvc - Win32 ReleaseAxp" (based on\
- "Win32 (ALPHA) Dynamic-Link Library")
-!MESSAGE "zlibvc - Win32 ReleaseWithoutAsm" (based on\
- "Win32 (x86) Dynamic-Link Library")
-!MESSAGE "zlibvc - Win32 ReleaseWithoutCrtdll" (based on\
- "Win32 (x86) Dynamic-Link Library")
-!MESSAGE 
-
-# Begin Project
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir ".\Release"
-# PROP BASE Intermediate_Dir ".\Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir ".\Release"
-# PROP Intermediate_Dir ".\Release"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-CPP=cl.exe
-# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c
-# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /FD /c
-# SUBTRACT CPP /YX
-MTL=midl.exe
-# ADD BASE MTL /nologo /D "NDEBUG" /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-RSC=rc.exe
-# ADD BASE RSC /l 0x40c /d "NDEBUG"
-# ADD RSC /l 0x40c /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /machine:I386
-# ADD LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
-# SUBTRACT LINK32 /pdb:none
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir ".\Debug"
-# PROP BASE Intermediate_Dir ".\Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir ".\Debug"
-# PROP Intermediate_Dir ".\Debug"
-# PROP Target_Dir ""
-CPP=cl.exe
-# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /YX /c
-# ADD CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /FD /c
-# SUBTRACT CPP /YX
-MTL=midl.exe
-# ADD BASE MTL /nologo /D "_DEBUG" /win32
-# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
-RSC=rc.exe
-# ADD BASE RSC /l 0x40c /d "_DEBUG"
-# ADD RSC /l 0x40c /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /debug /machine:I386
-# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /debug /machine:I386 /out:".\Debug\zlib.dll"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "zlibvc__"
-# PROP BASE Intermediate_Dir "zlibvc__"
-# PROP BASE Ignore_Export_Lib 0
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "zlibvc__"
-# PROP Intermediate_Dir "zlibvc__"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-MTL=midl.exe
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-CPP=cl.exe
-# ADD BASE CPP /nologo /MT /Gt0 /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /YX /FD /c
-# ADD CPP /nologo /MT /Gt0 /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /FD /c
-# SUBTRACT CPP /YX
-RSC=rc.exe
-# ADD BASE RSC /l 0x40c /d "NDEBUG"
-# ADD RSC /l 0x40c /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 crtdll.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /map /machine:ALPHA /nodefaultlib /out:".\Release\zlib.dll"
-# SUBTRACT BASE LINK32 /pdb:none
-# ADD LINK32 crtdll.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /map /machine:ALPHA /nodefaultlib /out:"zlibvc__\zlib.dll"
-# SUBTRACT LINK32 /pdb:none
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "zlibvc_0"
-# PROP BASE Intermediate_Dir "zlibvc_0"
-# PROP BASE Ignore_Export_Lib 0
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "zlibvc_0"
-# PROP Intermediate_Dir "zlibvc_0"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-CPP=cl.exe
-# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /YX /FD /c
-# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /FD /c
-# SUBTRACT CPP /YX
-MTL=midl.exe
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-RSC=rc.exe
-# ADD BASE RSC /l 0x40c /d "NDEBUG"
-# ADD RSC /l 0x40c /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
-# SUBTRACT BASE LINK32 /pdb:none
-# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\zlibvc_0\zlib.dll"
-# SUBTRACT LINK32 /pdb:none
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "zlibvc_1"
-# PROP BASE Intermediate_Dir "zlibvc_1"
-# PROP BASE Ignore_Export_Lib 0
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "zlibvc_1"
-# PROP Intermediate_Dir "zlibvc_1"
-# PROP Ignore_Export_Lib 0
-# PROP Target_Dir ""
-CPP=cl.exe
-# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /YX /FD /c
-# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /FD /c
-# SUBTRACT CPP /YX
-MTL=midl.exe
-# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
-RSC=rc.exe
-# ADD BASE RSC /l 0x40c /d "NDEBUG"
-# ADD RSC /l 0x40c /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LINK32=link.exe
-# ADD BASE LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
-# SUBTRACT BASE LINK32 /pdb:none
-# ADD LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\zlibvc_1\zlib.dll"
-# SUBTRACT LINK32 /pdb:none
-
-!ENDIF 
-
-# Begin Target
-
-# Name "zlibvc - Win32 Release"
-# Name "zlibvc - Win32 Debug"
-# Name "zlibvc - Win32 ReleaseAxp"
-# Name "zlibvc - Win32 ReleaseWithoutAsm"
-# Name "zlibvc - Win32 ReleaseWithoutCrtdll"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;hpj;bat;for;f90"
-# Begin Source File
-
-SOURCE=.\adler32.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_ADLER=\
-	".\zconf.h"\
-	".\zlib.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\compress.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_COMPR=\
-	".\zconf.h"\
-	".\zlib.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\crc32.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_CRC32=\
-	".\zconf.h"\
-	".\zlib.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\deflate.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_DEFLA=\
-	".\deflate.h"\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\gvmat32c.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\gzio.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_GZIO_=\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\infblock.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_INFBL=\
-	".\infblock.h"\
-	".\infcodes.h"\
-	".\inftrees.h"\
-	".\infutil.h"\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\infcodes.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_INFCO=\
-	".\infblock.h"\
-	".\infcodes.h"\
-	".\inffast.h"\
-	".\inftrees.h"\
-	".\infutil.h"\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\inffast.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_INFFA=\
-	".\infblock.h"\
-	".\infcodes.h"\
-	".\inffast.h"\
-	".\inftrees.h"\
-	".\infutil.h"\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\inflate.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_INFLA=\
-	".\infblock.h"\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\inftrees.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_INFTR=\
-	".\inftrees.h"\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\infutil.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_INFUT=\
-	".\infblock.h"\
-	".\infcodes.h"\
-	".\inftrees.h"\
-	".\infutil.h"\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\trees.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_TREES=\
-	".\deflate.h"\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\uncompr.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_UNCOM=\
-	".\zconf.h"\
-	".\zlib.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\unzip.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\zip.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# Begin Source File
-
-SOURCE=.\zlib.rc
-# End Source File
-# Begin Source File
-
-SOURCE=.\zlibvc.def
-# End Source File
-# Begin Source File
-
-SOURCE=.\zutil.c
-
-!IF  "$(CFG)" == "zlibvc - Win32 Release"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
-
-DEP_CPP_ZUTIL=\
-	".\zconf.h"\
-	".\zlib.h"\
-	".\zutil.h"\
-	
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
-
-!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
-
-!ENDIF 
-
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd"
-# Begin Source File
-
-SOURCE=.\deflate.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\infblock.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\infcodes.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\inffast.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\inftrees.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\infutil.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\zconf.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\zlib.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\zutil.h
-# End Source File
-# End Group
-# Begin Group "Resource Files"
-
-# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe"
-# End Group
-# End Target
-# End Project

contrib/asm386/zlibvc.dsw

@@ -1,41 +0,0 @@
-Microsoft Developer Studio Workspace File, Format Version 5.00
-# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
-
-###############################################################################
-
-Project: "zlibstat"=.\zlibstat.dsp - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Project: "zlibvc"=.\zlibvc.dsp - Package Owner=<4>
-
-Package=<5>
-{{{
-}}}
-
-Package=<4>
-{{{
-}}}
-
-###############################################################################
-
-Global:
-
-Package=<5>
-{{{
-}}}
-
-Package=<3>
-{{{
-}}}
-
-###############################################################################
-

contrib/asm586/README.586

@@ -1,43 +0,0 @@
-This is a patched version of zlib modified to use
-Pentium-optimized assembly code in the deflation algorithm. The files
-changed/added by this patch are:
-
-README.586
-match.S
-
-The effectiveness of these modifications is a bit marginal, as the the
-program's bottleneck seems to be mostly L1-cache contention, for which
-there is no real way to work around without rewriting the basic
-algorithm. The speedup on average is around 5-10% (which is generally
-less than the amount of variance between subsequent executions).
-However, when used at level 9 compression, the cache contention can
-drop enough for the assembly version to achieve 10-20% speedup (and
-sometimes more, depending on the amount of overall redundancy in the
-files). Even here, though, cache contention can still be the limiting
-factor, depending on the nature of the program using the zlib library.
-This may also mean that better improvements will be seen on a Pentium
-with MMX, which suffers much less from L1-cache contention, but I have
-not yet verified this.
-
-Note that this code has been tailored for the Pentium in particular,
-and will not perform well on the Pentium Pro (due to the use of a
-partial register in the inner loop).
-
-If you are using an assembler other than GNU as, you will have to
-translate match.S to use your assembler's syntax. (Have fun.)
-
-Brian Raiter
-breadbox@muppetlabs.com
-April, 1998
-
-
-Added for zlib 1.1.3:
-
-The patches come from
-http://www.muppetlabs.com/~breadbox/software/assembly.html
-
-To compile zlib with this asm file, copy match.S to the zlib directory
-then do:
-
-CFLAGS="-O3 -DASMV" ./configure
-make OBJA=match.o

contrib/asm586/match.S

@@ -1,354 +0,0 @@
-/* match.s -- Pentium-optimized version of longest_match()
- * Written for zlib 1.1.2
- * Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
- *
- * This is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License.
- */
-
-#ifndef NO_UNDERLINE
-#define	match_init	_match_init
-#define	longest_match	_longest_match
-#endif
-
-#define	MAX_MATCH	(258)
-#define	MIN_MATCH	(3)
-#define	MIN_LOOKAHEAD	(MAX_MATCH + MIN_MATCH + 1)
-#define	MAX_MATCH_8	((MAX_MATCH + 7) & ~7)
-
-/* stack frame offsets */
-
-#define	wmask			0	/* local copy of s->wmask	*/
-#define	window			4	/* local copy of s->window	*/
-#define	windowbestlen		8	/* s->window + bestlen		*/
-#define	chainlenscanend		12	/* high word: current chain len	*/
-					/* low word: last bytes sought	*/
-#define	scanstart		16	/* first two bytes of string	*/
-#define	scanalign		20	/* dword-misalignment of string	*/
-#define	nicematch		24	/* a good enough match size	*/
-#define	bestlen			28	/* size of best match so far	*/
-#define	scan			32	/* ptr to string wanting match	*/
-
-#define	LocalVarsSize		(36)
-/*	saved ebx		36 */
-/*	saved edi		40 */
-/*	saved esi		44 */
-/*	saved ebp		48 */
-/*	return address		52 */
-#define	deflatestate		56	/* the function arguments	*/
-#define	curmatch		60
-
-/* Offsets for fields in the deflate_state structure. These numbers
- * are calculated from the definition of deflate_state, with the
- * assumption that the compiler will dword-align the fields. (Thus,
- * changing the definition of deflate_state could easily cause this
- * program to crash horribly, without so much as a warning at
- * compile time. Sigh.)
- */
-#define	dsWSize			36
-#define	dsWMask			44
-#define	dsWindow		48
-#define	dsPrev			56
-#define	dsMatchLen		88
-#define	dsPrevMatch		92
-#define	dsStrStart		100
-#define	dsMatchStart		104
-#define	dsLookahead		108
-#define	dsPrevLen		112
-#define	dsMaxChainLen		116
-#define	dsGoodMatch		132
-#define	dsNiceMatch		136
-
-
-.file "match.S"
-
-.globl	match_init, longest_match
-
-.text
-
-/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
-
-longest_match:
-
-/* Save registers that the compiler may be using, and adjust %esp to	*/
-/* make room for our stack frame.					*/
-
-		pushl	%ebp
-		pushl	%edi
-		pushl	%esi
-		pushl	%ebx
-		subl	$LocalVarsSize, %esp
-
-/* Retrieve the function arguments. %ecx will hold cur_match		*/
-/* throughout the entire function. %edx will hold the pointer to the	*/
-/* deflate_state structure during the function's setup (before		*/
-/* entering the main loop).						*/
-
-		movl	deflatestate(%esp), %edx
-		movl	curmatch(%esp), %ecx
-
-/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;	*/
-
-		movl	dsNiceMatch(%edx), %eax
-		movl	dsLookahead(%edx), %ebx
-		cmpl	%eax, %ebx
-		jl	LookaheadLess
-		movl	%eax, %ebx
-LookaheadLess:	movl	%ebx, nicematch(%esp)
-
-/* register Bytef *scan = s->window + s->strstart;			*/
-
-		movl	dsWindow(%edx), %esi
-		movl	%esi, window(%esp)
-		movl	dsStrStart(%edx), %ebp
-		lea	(%esi,%ebp), %edi
-		movl	%edi, scan(%esp)
-
-/* Determine how many bytes the scan ptr is off from being		*/
-/* dword-aligned.							*/
-
-		movl	%edi, %eax
-		negl	%eax
-		andl	$3, %eax
-		movl	%eax, scanalign(%esp)
-
-/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ?			*/
-/*     s->strstart - (IPos)MAX_DIST(s) : NIL;				*/
-
-		movl	dsWSize(%edx), %eax
-		subl	$MIN_LOOKAHEAD, %eax
-		subl	%eax, %ebp
-		jg	LimitPositive
-		xorl	%ebp, %ebp
-LimitPositive:
-
-/* unsigned chain_length = s->max_chain_length;				*/
-/* if (s->prev_length >= s->good_match) {				*/
-/*     chain_length >>= 2;						*/
-/* }									*/
-
-		movl	dsPrevLen(%edx), %eax
-		movl	dsGoodMatch(%edx), %ebx
-		cmpl	%ebx, %eax
-		movl	dsMaxChainLen(%edx), %ebx
-		jl	LastMatchGood
-		shrl	$2, %ebx
-LastMatchGood:
-
-/* chainlen is decremented once beforehand so that the function can	*/
-/* use the sign flag instead of the zero flag for the exit test.	*/
-/* It is then shifted into the high word, to make room for the scanend	*/
-/* scanend value, which it will always accompany.			*/
-
-		decl	%ebx
-		shll	$16, %ebx
-
-/* int best_len = s->prev_length;					*/
-
-		movl	dsPrevLen(%edx), %eax
-		movl	%eax, bestlen(%esp)
-
-/* Store the sum of s->window + best_len in %esi locally, and in %esi.	*/
-
-		addl	%eax, %esi
-		movl	%esi, windowbestlen(%esp)
-
-/* register ush scan_start = *(ushf*)scan;				*/
-/* register ush scan_end   = *(ushf*)(scan+best_len-1);			*/
-
-		movw	(%edi), %bx
-		movw	%bx, scanstart(%esp)
-		movw	-1(%edi,%eax), %bx
-		movl	%ebx, chainlenscanend(%esp)
-
-/* Posf *prev = s->prev;						*/
-/* uInt wmask = s->w_mask;						*/
-
-		movl	dsPrev(%edx), %edi
-		movl	dsWMask(%edx), %edx
-		mov	%edx, wmask(%esp)
-
-/* Jump into the main loop.						*/
-
-		jmp	LoopEntry
-
-.balign 16
-
-/* do {
- *     match = s->window + cur_match;
- *     if (*(ushf*)(match+best_len-1) != scan_end ||
- *         *(ushf*)match != scan_start) continue;
- *     [...]
- * } while ((cur_match = prev[cur_match & wmask]) > limit
- *          && --chain_length != 0);
- *
- * Here is the inner loop of the function. The function will spend the
- * majority of its time in this loop, and majority of that time will
- * be spent in the first ten instructions.
- *
- * Within this loop:
- * %ebx = chainlenscanend - i.e., ((chainlen << 16) | scanend)
- * %ecx = curmatch
- * %edx = curmatch & wmask
- * %esi = windowbestlen - i.e., (window + bestlen)
- * %edi = prev
- * %ebp = limit
- *
- * Two optimization notes on the choice of instructions:
- *
- * The first instruction uses a 16-bit address, which costs an extra,
- * unpairable cycle. This is cheaper than doing a 32-bit access and
- * zeroing the high word, due to the 3-cycle misalignment penalty which
- * would occur half the time. This also turns out to be cheaper than
- * doing two separate 8-bit accesses, as the memory is so rarely in the
- * L1 cache.
- *
- * The window buffer, however, apparently spends a lot of time in the
- * cache, and so it is faster to retrieve the word at the end of the
- * match string with two 8-bit loads. The instructions that test the
- * word at the beginning of the match string, however, are executed
- * much less frequently, and there it was cheaper to use 16-bit
- * instructions, which avoided the necessity of saving off and
- * subsequently reloading one of the other registers.
- */
-LookupLoop:
-							/* 1 U & V  */
-		movw	(%edi,%edx,2), %cx		/* 2 U pipe */
-		movl	wmask(%esp), %edx		/* 2 V pipe */
-		cmpl	%ebp, %ecx			/* 3 U pipe */
-		jbe	LeaveNow			/* 3 V pipe */
-		subl	$0x00010000, %ebx		/* 4 U pipe */
-		js	LeaveNow			/* 4 V pipe */
-LoopEntry:	movb	-1(%esi,%ecx), %al		/* 5 U pipe */
-		andl	%ecx, %edx			/* 5 V pipe */
-		cmpb	%bl, %al			/* 6 U pipe */
-		jnz	LookupLoop			/* 6 V pipe */
-		movb	(%esi,%ecx), %ah
-		cmpb	%bh, %ah
-		jnz	LookupLoop
-		movl	window(%esp), %eax
-		movw	(%eax,%ecx), %ax
-		cmpw	scanstart(%esp), %ax
-		jnz	LookupLoop
-
-/* Store the current value of chainlen.					*/
-
-		movl	%ebx, chainlenscanend(%esp)
-
-/* Point %edi to the string under scrutiny, and %esi to the string we	*/
-/* are hoping to match it up with. In actuality, %esi and %edi are	*/
-/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is	*/
-/* initialized to -(MAX_MATCH_8 - scanalign).				*/
-
-		movl	window(%esp), %esi
-		movl	scan(%esp), %edi
-		addl	%ecx, %esi
-		movl	scanalign(%esp), %eax
-		movl	$(-MAX_MATCH_8), %edx
-		lea	MAX_MATCH_8(%edi,%eax), %edi
-		lea	MAX_MATCH_8(%esi,%eax), %esi
-
-/* Test the strings for equality, 8 bytes at a time. At the end,
- * adjust %edx so that it is offset to the exact byte that mismatched.
- *
- * We already know at this point that the first three bytes of the
- * strings match each other, and they can be safely passed over before
- * starting the compare loop. So what this code does is skip over 0-3
- * bytes, as much as necessary in order to dword-align the %edi
- * pointer. (%esi will still be misaligned three times out of four.)
- *
- * It should be confessed that this loop usually does not represent
- * much of the total running time. Replacing it with a more
- * straightforward "rep cmpsb" would not drastically degrade
- * performance.
- */
-LoopCmps:
-		movl	(%esi,%edx), %eax
-		movl	(%edi,%edx), %ebx
-		xorl	%ebx, %eax
-		jnz	LeaveLoopCmps
-		movl	4(%esi,%edx), %eax
-		movl	4(%edi,%edx), %ebx
-		xorl	%ebx, %eax
-		jnz	LeaveLoopCmps4
-		addl	$8, %edx
-		jnz	LoopCmps
-		jmp	LenMaximum
-LeaveLoopCmps4:	addl	$4, %edx
-LeaveLoopCmps:	testl	$0x0000FFFF, %eax
-		jnz	LenLower
-		addl	$2, %edx
-		shrl	$16, %eax
-LenLower:	subb	$1, %al
-		adcl	$0, %edx
-
-/* Calculate the length of the match. If it is longer than MAX_MATCH,	*/
-/* then automatically accept it as the best possible match and leave.	*/
-
-		lea	(%edi,%edx), %eax
-		movl	scan(%esp), %edi
-		subl	%edi, %eax
-		cmpl	$MAX_MATCH, %eax
-		jge	LenMaximum
-
-/* If the length of the match is not longer than the best match we	*/
-/* have so far, then forget it and return to the lookup loop.		*/
-
-		movl	deflatestate(%esp), %edx
-		movl	bestlen(%esp), %ebx
-		cmpl	%ebx, %eax
-		jg	LongerMatch
-		movl	chainlenscanend(%esp), %ebx
-		movl	windowbestlen(%esp), %esi
-		movl	dsPrev(%edx), %edi
-		movl	wmask(%esp), %edx
-		andl	%ecx, %edx
-		jmp	LookupLoop
-
-/*         s->match_start = cur_match;					*/
-/*         best_len = len;						*/
-/*         if (len >= nice_match) break;				*/
-/*         scan_end = *(ushf*)(scan+best_len-1);			*/
-
-LongerMatch:	movl	nicematch(%esp), %ebx
-		movl	%eax, bestlen(%esp)
-		movl	%ecx, dsMatchStart(%edx)
-		cmpl	%ebx, %eax
-		jge	LeaveNow
-		movl	window(%esp), %esi
-		addl	%eax, %esi
-		movl	%esi, windowbestlen(%esp)
-		movl	chainlenscanend(%esp), %ebx
-		movw	-1(%edi,%eax), %bx
-		movl	dsPrev(%edx), %edi
-		movl	%ebx, chainlenscanend(%esp)
-		movl	wmask(%esp), %edx
-		andl	%ecx, %edx
-		jmp	LookupLoop
-
-/* Accept the current string, with the maximum possible length.		*/
-
-LenMaximum:	movl	deflatestate(%esp), %edx
-		movl	$MAX_MATCH, bestlen(%esp)
-		movl	%ecx, dsMatchStart(%edx)
-
-/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len;		*/
-/* return s->lookahead;							*/
-
-LeaveNow:
-		movl	deflatestate(%esp), %edx
-		movl	bestlen(%esp), %ebx
-		movl	dsLookahead(%edx), %eax
-		cmpl	%eax, %ebx
-		jg	LookaheadRet
-		movl	%ebx, %eax
-LookaheadRet:
-
-/* Restore the stack and return from whence we came.			*/
-
-		addl	$LocalVarsSize, %esp
-		popl	%ebx
-		popl	%esi
-		popl	%edi
-		popl	%ebp
-match_init:	ret

contrib/asm686/README.686

@@ -32,3 +32,20 @@ then do:
 
 CFLAGS="-O3 -DASMV" ./configure
 make OBJA=match.o
+
+
+Update:
+
+I've been ignoring these assembly routines for years, believing that
+gcc's generated code had caught up with it sometime around gcc 2.95
+and the major rearchitecting of the Pentium 4. However, I recently
+learned that, despite what I believed, this code still has some life
+in it. On the Pentium 4 and AMD64 chips, it continues to run about 8%
+faster than the code produced by gcc 4.1.
+
+In acknowledgement of its continuing usefulness, I've altered the
+license to match that of the rest of zlib. Share and Enjoy!
+
+Brian Raiter
+breadbox@muppetlabs.com
+April, 2007

contrib/asm686/match.S

@@ -1,9 +1,23 @@
-/* match.s -- Pentium-Pro-optimized version of longest_match()
- * Written for zlib 1.1.2
- * Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
+/* match.S -- x86 assembly version of the zlib longest_match() function.
+ * Optimized for the Intel 686 chips (PPro and later).
  *
- * This is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License.
+ * Copyright (C) 1998, 2007 Brian Raiter <breadbox@muppetlabs.com>
+ *
+ * This software is provided 'as-is', without any express or implied
+ * warranty.  In no event will the author be held liable for any damages
+ * arising from the use of this software.
+ *
+ * Permission is granted to anyone to use this software for any purpose,
+ * including commercial applications, and to alter it and redistribute it
+ * freely, subject to the following restrictions:
+ *
+ * 1. The origin of this software must not be misrepresented; you must not
+ *    claim that you wrote the original software. If you use this software
+ *    in a product, an acknowledgment in the product documentation would be
+ *    appreciated but is not required.
+ * 2. Altered source versions must be plainly marked as such, and must not be
+ *    misrepresented as being the original software.
+ * 3. This notice may not be removed or altered from any source distribution.
  */
 
 #ifndef NO_UNDERLINE
@@ -38,26 +52,28 @@
 #define	deflatestate		56	/* the function arguments	*/
 #define	curmatch		60
 
-/* Offsets for fields in the deflate_state structure. These numbers
- * are calculated from the definition of deflate_state, with the
- * assumption that the compiler will dword-align the fields. (Thus,
- * changing the definition of deflate_state could easily cause this
- * program to crash horribly, without so much as a warning at
- * compile time. Sigh.)
+/* All the +zlib1222add offsets are due to the addition of fields
+ *  in zlib in the deflate_state structure since the asm code was first written
+ * (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+ * (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+ * if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
  */
-#define	dsWSize			36
-#define	dsWMask			44
-#define	dsWindow		48
-#define	dsPrev			56
-#define	dsMatchLen		88
-#define	dsPrevMatch		92
-#define	dsStrStart		100
-#define	dsMatchStart		104
-#define	dsLookahead		108
-#define	dsPrevLen		112
-#define	dsMaxChainLen		116
-#define	dsGoodMatch		132
-#define	dsNiceMatch		136
+
+#define zlib1222add		(8)
+
+#define	dsWSize			(36+zlib1222add)
+#define	dsWMask			(44+zlib1222add)
+#define	dsWindow		(48+zlib1222add)
+#define	dsPrev			(56+zlib1222add)
+#define	dsMatchLen		(88+zlib1222add)
+#define	dsPrevMatch		(92+zlib1222add)
+#define	dsStrStart		(100+zlib1222add)
+#define	dsMatchStart		(104+zlib1222add)
+#define	dsLookahead		(108+zlib1222add)
+#define	dsPrevLen		(112+zlib1222add)
+#define	dsMaxChainLen		(116+zlib1222add)
+#define	dsGoodMatch		(132+zlib1222add)
+#define	dsNiceMatch		(136+zlib1222add)
 
 
 .file "match.S"
@@ -67,17 +83,25 @@
 .text
 
 /* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
+.cfi_sections	.debug_frame
 
 longest_match:
 
+.cfi_startproc
 /* Save registers that the compiler may be using, and adjust %esp to	*/
 /* make room for our stack frame.					*/
 
 		pushl	%ebp
+		.cfi_def_cfa_offset 8
+		.cfi_offset ebp, -8
 		pushl	%edi
+		.cfi_def_cfa_offset 12
 		pushl	%esi
+		.cfi_def_cfa_offset 16
 		pushl	%ebx
+		.cfi_def_cfa_offset 20
 		subl	$LocalVarsSize, %esp
+		.cfi_def_cfa_offset LocalVarsSize+20
 
 /* Retrieve the function arguments. %ecx will hold cur_match		*/
 /* throughout the entire function. %edx will hold the pointer to the	*/
@@ -320,8 +344,14 @@ LookaheadRet:
 /* Restore the stack and return from whence we came.			*/
 
 		addl	$LocalVarsSize, %esp
+		.cfi_def_cfa_offset 20
 		popl	%ebx
+		.cfi_def_cfa_offset 16
 		popl	%esi
+		.cfi_def_cfa_offset 12
 		popl	%edi
+		.cfi_def_cfa_offset 8
 		popl	%ebp
+		.cfi_def_cfa_offset 4
+.cfi_endproc
 match_init:	ret

contrib/blast/blast.c

@@ -1,7 +1,7 @@
 /* blast.c
- * Copyright (C) 2003 Mark Adler
+ * Copyright (C) 2003, 2012 Mark Adler
  * For conditions of distribution and use, see copyright notice in blast.h
- * version 1.1, 16 Feb 2003
+ * version 1.2, 24 Oct 2012
  *
  * blast.c decompresses data compressed by the PKWare Compression Library.
  * This function provides functionality similar to the explode() function of
@@ -22,6 +22,8 @@
  *
  * 1.0  12 Feb 2003     - First version
  * 1.1  16 Feb 2003     - Fixed distance check for > 4 GB uncompressed data
+ * 1.2  24 Oct 2012     - Add note about using binary mode in stdio
+ *                      - Fix comparisons of differently signed integers
  */
 
 #include <setjmp.h>             /* for setjmp(), longjmp(), and jmp_buf */
@@ -279,7 +281,7 @@ local int decomp(struct state *s)
     int dict;           /* log2(dictionary size) - 6 */
     int symbol;         /* decoded symbol, extra bits for distance */
     int len;            /* length for copy */
-    int dist;		/* distance for copy */
+    unsigned dist;      /* distance for copy */
     int copy;           /* copy counter */
     unsigned char *from, *to;   /* copy pointers */
     static int virgin = 1;                              /* build tables once */

contrib/blast/blast.h

@@ -1,6 +1,6 @@
 /* blast.h -- interface for blast.c
-  Copyright (C) 2003 Mark Adler
-  version 1.1, 16 Feb 2003
+  Copyright (C) 2003, 2012 Mark Adler
+  version 1.2, 24 Oct 2012
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the author be held liable for any damages
@@ -28,6 +28,10 @@
  * that library.  (Note: PKWare overused the "implode" verb, and the format
  * used by their library implode() function is completely different and
  * incompatible with the implode compression method supported by PKZIP.)
+ *
+ * The binary mode for stdio functions should be used to assure that the
+ * compressed data is not corrupted when read or written.  For example:
+ * fopen(..., "rb") and fopen(..., "wb").
  */
 
 

contrib/delphi/ZLib.pas

@@ -1,33 +1,33 @@
 {*******************************************************}
 {                                                       }
-{       Delphi Supplemental Components                  }
+{       Borland Delphi Supplemental Components          }
 {       ZLIB Data Compression Interface Unit            }
 {                                                       }
-{       Copyright (c) 1997 Borland International        }
+{       Copyright (c) 1997,99 Borland Corporation       }
 {                                                       }
 {*******************************************************}
 
-{ Modified for zlib 1.1.3 by Davide Moretti <dave@rimini.com }
+{ Updated for zlib 1.2.x by Cosmin Truta <cosmint@cs.ubbcluj.ro> }
 
-unit zlib;
+unit ZLib;
 
 interface
 
-uses Sysutils, Classes;
+uses SysUtils, Classes;
 
 type
-  TAlloc = function (AppData: Pointer; Items, Size: Integer): Pointer;
-  TFree = procedure (AppData, Block: Pointer);
+  TAlloc = function (AppData: Pointer; Items, Size: Integer): Pointer; cdecl;
+  TFree = procedure (AppData, Block: Pointer); cdecl;
 
   // Internal structure.  Ignore.
   TZStreamRec = packed record
     next_in: PChar;       // next input byte
     avail_in: Integer;    // number of bytes available at next_in
-    total_in: Integer;    // total nb of input bytes read so far
+    total_in: Longint;    // total nb of input bytes read so far
 
     next_out: PChar;      // next output byte should be put here
     avail_out: Integer;   // remaining free space at next_out
-    total_out: Integer;   // total nb of bytes output so far
+    total_out: Longint;   // total nb of bytes output so far
 
     msg: PChar;           // last error message, NULL if no error
     internal: Pointer;    // not visible by applications
@@ -37,8 +37,8 @@ type
     AppData: Pointer;     // private data object passed to zalloc and zfree
 
     data_type: Integer;   // best guess about the data type: ascii or binary
-    adler: Integer;       // adler32 value of the uncompressed data
-    reserved: Integer;    // reserved for future use
+    adler: Longint;       // adler32 value of the uncompressed data
+    reserved: Longint;    // reserved for future use
   end;
 
   // Abstract ancestor class
@@ -143,18 +143,26 @@ procedure CompressBuf(const InBuf: Pointer; InBytes: Integer;
 procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer;
  OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer);
 
+{ DecompressToUserBuf decompresses data, buffer to buffer, in one call.
+   In: InBuf = ptr to compressed data
+       InBytes = number of bytes in InBuf
+  Out: OutBuf = ptr to user-allocated buffer to contain decompressed data
+       BufSize = number of bytes in OutBuf   }
+procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
+  const OutBuf: Pointer; BufSize: Integer);
+
 const
-  zlib_version = '1.1.3';
+  zlib_version = '1.2.7.1';
 
 type
   EZlibError = class(Exception);
   ECompressionError = class(EZlibError);
   EDecompressionError = class(EZlibError);
 
-function adler32(adler: Integer; buf: PChar; len: Integer): Integer;
-
 implementation
 
+uses ZLibConst;
+
 const
   Z_NO_FLUSH      = 0;
   Z_PARTIAL_FLUSH = 1;
@@ -179,6 +187,7 @@ const
 
   Z_FILTERED            = 1;
   Z_HUFFMAN_ONLY        = 2;
+  Z_RLE                 = 3;
   Z_DEFAULT_STRATEGY    = 0;
 
   Z_BINARY   = 0;
@@ -187,56 +196,41 @@ const
 
   Z_DEFLATED = 8;
 
-  _z_errmsg: array[0..9] of PChar = (
-    'need dictionary',      // Z_NEED_DICT      (2)
-    'stream end',           // Z_STREAM_END     (1)
-    '',                     // Z_OK             (0)
-    'file error',           // Z_ERRNO          (-1)
-    'stream error',         // Z_STREAM_ERROR   (-2)
-    'data error',           // Z_DATA_ERROR     (-3)
-    'insufficient memory',  // Z_MEM_ERROR      (-4)
-    'buffer error',         // Z_BUF_ERROR      (-5)
-    'incompatible version', // Z_VERSION_ERROR  (-6)
-    ''
-  );
 
+{$L adler32.obj}
+{$L compress.obj}
+{$L crc32.obj}
 {$L deflate.obj}
+{$L infback.obj}
+{$L inffast.obj}
 {$L inflate.obj}
 {$L inftrees.obj}
 {$L trees.obj}
-{$L adler32.obj}
-{$L infblock.obj}
-{$L infcodes.obj}
-{$L infutil.obj}
-{$L inffast.obj}
+{$L uncompr.obj}
+{$L zutil.obj}
 
-procedure _tr_init; external;
-procedure _tr_tally; external;
-procedure _tr_flush_block; external;
-procedure _tr_align; external;
-procedure _tr_stored_block; external;
-function adler32; external;
-procedure inflate_blocks_new; external;
-procedure inflate_blocks; external;
-procedure inflate_blocks_reset; external;
-procedure inflate_blocks_free; external;
-procedure inflate_set_dictionary; external;
-procedure inflate_trees_bits; external;
-procedure inflate_trees_dynamic; external;
-procedure inflate_trees_fixed; external;
-procedure inflate_codes_new; external;
-procedure inflate_codes; external;
-procedure inflate_codes_free; external;
-procedure _inflate_mask; external;
-procedure inflate_flush; external;
-procedure inflate_fast; external;
+procedure adler32; external;
+procedure compressBound; external;
+procedure crc32; external;
+procedure deflateInit2_; external;
+procedure deflateParams; external;
 
-procedure _memset(P: Pointer; B: Byte; count: Integer);cdecl;
+function _malloc(Size: Integer): Pointer; cdecl;
+begin
+  Result := AllocMem(Size);
+end;
+
+procedure _free(Block: Pointer); cdecl;
+begin
+  FreeMem(Block);
+end;
+
+procedure _memset(P: Pointer; B: Byte; count: Integer); cdecl;
 begin
   FillChar(P^, count, B);
 end;
 
-procedure _memcpy(dest, source: Pointer; count: Integer);cdecl;
+procedure _memcpy(dest, source: Pointer; count: Integer); cdecl;
 begin
   Move(source^, dest^, count);
 end;
@@ -257,22 +251,23 @@ function inflateEnd(var strm: TZStreamRec): Integer; external;
 function inflateReset(var strm: TZStreamRec): Integer; external;
 
 
-function zcalloc(AppData: Pointer; Items, Size: Integer): Pointer;
+function zlibAllocMem(AppData: Pointer; Items, Size: Integer): Pointer; cdecl;
 begin
-  GetMem(Result, Items*Size);
+//  GetMem(Result, Items*Size);
+  Result := AllocMem(Items * Size);
 end;
 
-procedure zcfree(AppData, Block: Pointer);
+procedure zlibFreeMem(AppData, Block: Pointer); cdecl;
 begin
   FreeMem(Block);
 end;
 
-function zlibCheck(code: Integer): Integer;
+{function zlibCheck(code: Integer): Integer;
 begin
   Result := code;
   if code < 0 then
     raise EZlibError.Create('error');    //!!
-end;
+end;}
 
 function CCheck(code: Integer): Integer;
 begin
@@ -295,6 +290,8 @@ var
   P: Pointer;
 begin
   FillChar(strm, sizeof(strm), 0);
+  strm.zalloc := zlibAllocMem;
+  strm.zfree := zlibFreeMem;
   OutBytes := ((InBytes + (InBytes div 10) + 12) + 255) and not 255;
   GetMem(OutBuf, OutBytes);
   try
@@ -332,6 +329,8 @@ var
   BufInc: Integer;
 begin
   FillChar(strm, sizeof(strm), 0);
+  strm.zalloc := zlibAllocMem;
+  strm.zfree := zlibFreeMem;
   BufInc := (InBytes + 255) and not 255;
   if OutEstimate = 0 then
     OutBytes := BufInc
@@ -345,7 +344,7 @@ begin
     strm.avail_out := OutBytes;
     DCheck(inflateInit_(strm, zlib_version, sizeof(strm)));
     try
-      while DCheck(inflate(strm, Z_FINISH)) <> Z_STREAM_END do
+      while DCheck(inflate(strm, Z_NO_FLUSH)) <> Z_STREAM_END do
       begin
         P := OutBuf;
         Inc(OutBytes, BufInc);
@@ -364,6 +363,26 @@ begin
   end;
 end;
 
+procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
+  const OutBuf: Pointer; BufSize: Integer);
+var
+  strm: TZStreamRec;
+begin
+  FillChar(strm, sizeof(strm), 0);
+  strm.zalloc := zlibAllocMem;
+  strm.zfree := zlibFreeMem;
+  strm.next_in := InBuf;
+  strm.avail_in := InBytes;
+  strm.next_out := OutBuf;
+  strm.avail_out := BufSize;
+  DCheck(inflateInit_(strm, zlib_version, sizeof(strm)));
+  try
+    if DCheck(inflate(strm, Z_FINISH)) <> Z_STREAM_END then
+      raise EZlibError.CreateRes(@sTargetBufferTooSmall);
+  finally
+    DCheck(inflateEnd(strm));
+  end;
+end;
 
 // TCustomZlibStream
 
@@ -372,6 +391,8 @@ begin
   inherited Create;
   FStrm := Strm;
   FStrmPos := Strm.Position;
+  FZRec.zalloc := zlibAllocMem;
+  FZRec.zfree := zlibFreeMem;
 end;
 
 procedure TCustomZLibStream.Progress(Sender: TObject);
@@ -417,7 +438,7 @@ end;
 
 function TCompressionStream.Read(var Buffer; Count: Longint): Longint;
 begin
-  raise ECompressionError.Create('Invalid stream operation');
+  raise ECompressionError.CreateRes(@sInvalidStreamOp);
 end;
 
 function TCompressionStream.Write(const Buffer; Count: Longint): Longint;
@@ -445,7 +466,7 @@ begin
   if (Offset = 0) and (Origin = soFromCurrent) then
     Result := FZRec.total_in
   else
-    raise ECompressionError.Create('Invalid stream operation');
+    raise ECompressionError.CreateRes(@sInvalidStreamOp);
 end;
 
 function TCompressionStream.GetCompressionRate: Single;
@@ -469,6 +490,7 @@ end;
 
 destructor TDecompressionStream.Destroy;
 begin
+  FStrm.Seek(-FZRec.avail_in, 1);
   inflateEnd(FZRec);
   inherited Destroy;
 end;
@@ -492,14 +514,14 @@ begin
       FStrmPos := FStrm.Position;
       Progress(Self);
     end;
-    DCheck(inflate(FZRec, 0));
+    CCheck(inflate(FZRec, 0));
   end;
   Result := Count;
 end;
 
 function TDecompressionStream.Write(const Buffer; Count: Longint): Longint;
 begin
-  raise EDecompressionError.Create('Invalid stream operation');
+  raise EDecompressionError.CreateRes(@sInvalidStreamOp);
 end;
 
 function TDecompressionStream.Seek(Offset: Longint; Origin: Word): Longint;
@@ -527,8 +549,9 @@ begin
     end;
   end
   else
-    raise EDecompressionError.Create('Invalid stream operation');
+    raise EDecompressionError.CreateRes(@sInvalidStreamOp);
   Result := FZRec.total_out;
 end;
 
+
 end.

contrib/delphi/ZLibConst.pas

@@ -0,0 +1,11 @@
+unit ZLibConst;
+
+interface
+
+resourcestring
+  sTargetBufferTooSmall = 'ZLib error: target buffer may be too small';
+  sInvalidStreamOp = 'Invalid stream operation';
+
+implementation
+
+end.

contrib/delphi/readme.txt

@@ -0,0 +1,76 @@
+
+Overview
+========
+
+This directory contains an update to the ZLib interface unit,
+distributed by Borland as a Delphi supplemental component.
+
+The original ZLib unit is Copyright (c) 1997,99 Borland Corp.,
+and is based on zlib version 1.0.4.  There are a series of bugs
+and security problems associated with that old zlib version, and
+we recommend the users to update their ZLib unit.
+
+
+Summary of modifications
+========================
+
+- Improved makefile, adapted to zlib version 1.2.1.
+
+- Some field types from TZStreamRec are changed from Integer to
+  Longint, for consistency with the zlib.h header, and for 64-bit
+  readiness.
+
+- The zlib_version constant is updated.
+
+- The new Z_RLE strategy has its corresponding symbolic constant.
+
+- The allocation and deallocation functions and function types
+  (TAlloc, TFree, zlibAllocMem and zlibFreeMem) are now cdecl,
+  and _malloc and _free are added as C RTL stubs.  As a result,
+  the original C sources of zlib can be compiled out of the box,
+  and linked to the ZLib unit.
+
+
+Suggestions for improvements
+============================
+
+Currently, the ZLib unit provides only a limited wrapper around
+the zlib library, and much of the original zlib functionality is
+missing.  Handling compressed file formats like ZIP/GZIP or PNG
+cannot be implemented without having this functionality.
+Applications that handle these formats are either using their own,
+duplicated code, or not using the ZLib unit at all.
+
+Here are a few suggestions:
+
+- Checksum class wrappers around adler32() and crc32(), similar
+  to the Java classes that implement the java.util.zip.Checksum
+  interface.
+
+- The ability to read and write raw deflate streams, without the
+  zlib stream header and trailer.  Raw deflate streams are used
+  in the ZIP file format.
+
+- The ability to read and write gzip streams, used in the GZIP
+  file format, and normally produced by the gzip program.
+
+- The ability to select a different compression strategy, useful
+  to PNG and MNG image compression, and to multimedia compression
+  in general.  Besides the compression level
+
+    TCompressionLevel = (clNone, clFastest, clDefault, clMax);
+
+  which, in fact, could have used the 'z' prefix and avoided
+  TColor-like symbols
+
+    TCompressionLevel = (zcNone, zcFastest, zcDefault, zcMax);
+
+  there could be a compression strategy
+
+    TCompressionStrategy = (zsDefault, zsFiltered, zsHuffmanOnly, zsRle);
+
+- ZIP and GZIP stream handling via TStreams.
+
+
+--
+Cosmin Truta <cosmint@cs.ubbcluj.ro>

contrib/delphi/zlib.mak

@@ -1,36 +0,0 @@
-# Makefile for zlib32bd.lib
-# ------------- Borland C++ 4.5 -------------
-
-# The (32-bit) zlib32bd.lib made with this makefile is intended for use 
-# in making the (32-bit) DLL, png32bd.dll. It uses the "stdcall" calling 
-# convention.
-
-CFLAGS= -ps -O2 -C -K -N- -k- -d -3 -r- -w-par -w-aus -WDE
-CC=f:\bc45\bin\bcc32
-LIBFLAGS= /C
-LIB=f:\bc45\bin\tlib
-ZLIB=zlib32bd.lib
-
-.autodepend
-.c.obj:
-        $(CC) -c $(CFLAGS) $<
-
-OBJ1=adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infblock.obj 
-OBJ2=infcodes.obj inflate.obj inftrees.obj infutil.obj inffast.obj 
-OBJ3=trees.obj uncompr.obj zutil.obj
-pOBJ1=+adler32.obj+compress.obj+crc32.obj+deflate.obj+gzio.obj+infblock.obj 
-pOBJ2=+infcodes.obj+inflate.obj+inftrees.obj+infutil.obj+inffast.obj 
-pOBJ3=+trees.obj+uncompr.obj+zutil.obj
-
-all: $(ZLIB)
-
-$(ZLIB): $(OBJ1) $(OBJ2) $(OBJ3)
-        @if exist $@ del $@
-        $(LIB) @&&|
-$@ $(LIBFLAGS) &
-$(pOBJ1) &
-$(pOBJ2) &
-$(pOBJ3)
-|
-
-# End of makefile for zlib32bd.lib

contrib/delphi/zlibd32.mak

@@ -0,0 +1,99 @@
+# Makefile for zlib
+# For use with Delphi and C++ Builder under Win32
+# Updated for zlib 1.2.x by Cosmin Truta
+
+# ------------ Borland C++ ------------
+
+# This project uses the Delphi (fastcall/register) calling convention:
+LOC = -DZEXPORT=__fastcall -DZEXPORTVA=__cdecl
+
+CC = bcc32
+LD = bcc32
+AR = tlib
+# do not use "-pr" in CFLAGS
+CFLAGS = -a -d -k- -O2 $(LOC)
+LDFLAGS =
+
+
+# variables
+ZLIB_LIB = zlib.lib
+
+OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj
+OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
+OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj
+OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj
+
+
+# targets
+all: $(ZLIB_LIB) example.exe minigzip.exe
+
+.c.obj:
+	$(CC) -c $(CFLAGS) $*.c
+
+adler32.obj: adler32.c zlib.h zconf.h
+
+compress.obj: compress.c zlib.h zconf.h
+
+crc32.obj: crc32.c zlib.h zconf.h crc32.h
+
+deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+
+gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h
+
+gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h
+
+gzread.obj: gzread.c zlib.h zconf.h gzguts.h
+
+gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h
+
+infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h
+
+inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+
+trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h
+
+uncompr.obj: uncompr.c zlib.h zconf.h
+
+zutil.obj: zutil.c zutil.h zlib.h zconf.h
+
+example.obj: test/example.c zlib.h zconf.h
+
+minigzip.obj: test/minigzip.c zlib.h zconf.h
+
+
+# For the sake of the old Borland make,
+# the command line is cut to fit in the MS-DOS 128 byte limit:
+$(ZLIB_LIB): $(OBJ1) $(OBJ2)
+	-del $(ZLIB_LIB)
+	$(AR) $(ZLIB_LIB) $(OBJP1)
+	$(AR) $(ZLIB_LIB) $(OBJP2)
+
+
+# testing
+test: example.exe minigzip.exe
+	example
+	echo hello world | minigzip | minigzip -d
+
+example.exe: example.obj $(ZLIB_LIB)
+	$(LD) $(LDFLAGS) example.obj $(ZLIB_LIB)
+
+minigzip.exe: minigzip.obj $(ZLIB_LIB)
+	$(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB)
+
+
+# cleanup
+clean:
+	-del *.obj
+	-del *.exe
+	-del *.lib
+	-del *.tds
+	-del zlib.bak
+	-del foo.gz
+

contrib/delphi/zlibdef.pas

@@ -1,169 +0,0 @@
-unit zlibdef;
-
-interface
-
-uses
-  Windows;
-
-const
-  ZLIB_VERSION = '1.1.3';
-
-type
-  voidpf = Pointer;
-  int    = Integer;
-  uInt   = Cardinal;
-  pBytef = PChar;
-  uLong  = Cardinal;
-
-  alloc_func = function(opaque: voidpf; items, size: uInt): voidpf;
-                    stdcall;
-  free_func  = procedure(opaque, address: voidpf);
-                    stdcall;
-
-  internal_state = Pointer;
-
-  z_streamp = ^z_stream;
-  z_stream = packed record
-    next_in: pBytef;          // next input byte
-    avail_in: uInt;           // number of bytes available at next_in
-    total_in: uLong;          // total nb of input bytes read so far
-
-    next_out: pBytef;         // next output byte should be put there
-    avail_out: uInt;          // remaining free space at next_out
-    total_out: uLong;         // total nb of bytes output so far
-
-    msg: PChar;               // last error message, NULL if no error
-    state: internal_state;    // not visible by applications
-
-    zalloc: alloc_func;       // used to allocate the internal state
-    zfree: free_func;         // used to free the internal state
-    opaque: voidpf;           // private data object passed to zalloc and zfree
-
-    data_type: int;           // best guess about the data type: ascii or binary
-    adler: uLong;             // adler32 value of the uncompressed data
-    reserved: uLong;          // reserved for future use
-    end;
-
-const
-  Z_NO_FLUSH      = 0;
-  Z_SYNC_FLUSH    = 2;
-  Z_FULL_FLUSH    = 3;
-  Z_FINISH        = 4;
-
-  Z_OK            = 0;
-  Z_STREAM_END    = 1;
-
-  Z_NO_COMPRESSION         =  0;
-  Z_BEST_SPEED             =  1;
-  Z_BEST_COMPRESSION       =  9;
-  Z_DEFAULT_COMPRESSION    = -1;
-
-  Z_FILTERED            = 1;
-  Z_HUFFMAN_ONLY        = 2;
-  Z_DEFAULT_STRATEGY    = 0;
-
-  Z_BINARY   = 0;
-  Z_ASCII    = 1;
-  Z_UNKNOWN  = 2;
-
-  Z_DEFLATED    = 8;
-
-  MAX_MEM_LEVEL = 9;
-
-function adler32(adler: uLong; const buf: pBytef; len: uInt): uLong;
-             stdcall;
-function crc32(crc: uLong; const buf: pBytef; len: uInt): uLong;
-             stdcall;
-function deflate(strm: z_streamp; flush: int): int;
-             stdcall;
-function deflateCopy(dest, source: z_streamp): int;
-             stdcall;
-function deflateEnd(strm: z_streamp): int;
-             stdcall;
-function deflateInit2_(strm: z_streamp; level, method,
-                       windowBits, memLevel, strategy: int;
-                       const version: PChar; stream_size: int): int;
-             stdcall;
-function deflateInit_(strm: z_streamp; level: int;
-                      const version: PChar; stream_size: int): int;
-             stdcall;
-function deflateParams(strm: z_streamp; level, strategy: int): int;
-             stdcall;
-function deflateReset(strm: z_streamp): int;
-             stdcall;
-function deflateSetDictionary(strm: z_streamp;
-                              const dictionary: pBytef;
-                              dictLength: uInt): int;
-             stdcall;
-function inflate(strm: z_streamp; flush: int): int;
-             stdcall;
-function inflateEnd(strm: z_streamp): int;
-             stdcall;
-function inflateInit2_(strm: z_streamp; windowBits: int;
-                       const version: PChar; stream_size: int): int;
-             stdcall;
-function inflateInit_(strm: z_streamp; const version: PChar;
-                      stream_size: int): int;
-             stdcall;
-function inflateReset(strm: z_streamp): int;
-             stdcall;
-function inflateSetDictionary(strm: z_streamp;
-                              const dictionary: pBytef;
-                              dictLength: uInt): int;
-             stdcall;
-function inflateSync(strm: z_streamp): int;
-             stdcall;
-
-function deflateInit(strm: z_streamp; level: int): int;
-function deflateInit2(strm: z_streamp; level, method, windowBits,
-                      memLevel, strategy: int): int;
-function inflateInit(strm: z_streamp): int;
-function inflateInit2(strm: z_streamp; windowBits: int): int;
-
-implementation
-
-function deflateInit(strm: z_streamp; level: int): int;
-begin
-  Result := deflateInit_(strm, level, ZLIB_VERSION, sizeof(z_stream));
-end;
-
-function deflateInit2(strm: z_streamp; level, method, windowBits,
-                      memLevel, strategy: int): int;
-begin
-  Result := deflateInit2_(strm, level, method, windowBits, memLevel,
-                          strategy, ZLIB_VERSION, sizeof(z_stream));
-end;
-
-function inflateInit(strm: z_streamp): int;
-begin
-  Result := inflateInit_(strm, ZLIB_VERSION, sizeof(z_stream));
-end;
-
-function inflateInit2(strm: z_streamp; windowBits: int): int;
-begin
-  Result := inflateInit2_(strm, windowBits, ZLIB_VERSION,
-                          sizeof(z_stream));
-end;
-
-const
-  zlibDLL = 'png32bd.dll';
-
-function adler32; external zlibDLL;
-function crc32; external zlibDLL;
-function deflate; external zlibDLL;
-function deflateCopy; external zlibDLL;
-function deflateEnd; external zlibDLL;
-function deflateInit2_; external zlibDLL;
-function deflateInit_; external zlibDLL;
-function deflateParams; external zlibDLL;
-function deflateReset; external zlibDLL;
-function deflateSetDictionary; external zlibDLL;
-function inflate; external zlibDLL;
-function inflateEnd; external zlibDLL;
-function inflateInit2_; external zlibDLL;
-function inflateInit_; external zlibDLL;
-function inflateReset; external zlibDLL;
-function inflateSetDictionary; external zlibDLL;
-function inflateSync; external zlibDLL;
-
-end.

contrib/delphi2/d_zlib.bpr

@@ -1,224 +0,0 @@
-# ---------------------------------------------------------------------------
-!if !$d(BCB)
-BCB = $(MAKEDIR)\..
-!endif
-
-# ---------------------------------------------------------------------------
-# IDE SECTION
-# ---------------------------------------------------------------------------
-# The following section of the project makefile is managed by the BCB IDE.
-# It is recommended to use the IDE to change any of the values in this
-# section.
-# ---------------------------------------------------------------------------
-
-VERSION = BCB.03
-# ---------------------------------------------------------------------------
-PROJECT = d_zlib.lib
-OBJFILES = d_zlib.obj adler32.obj deflate.obj infblock.obj infcodes.obj inffast.obj \
-  inflate.obj inftrees.obj infutil.obj trees.obj
-RESFILES =
-RESDEPEN = $(RESFILES)
-LIBFILES =
-LIBRARIES = VCL35.lib
-SPARELIBS = VCL35.lib
-DEFFILE =
-PACKAGES = VCLX35.bpi VCL35.bpi VCLDB35.bpi VCLDBX35.bpi ibsmp35.bpi bcbsmp35.bpi \
-  dclocx35.bpi QRPT35.bpi TEEUI35.bpi TEEDB35.bpi TEE35.bpi DSS35.bpi \
-  NMFAST35.bpi INETDB35.bpi INET35.bpi VCLMID35.bpi
-# ---------------------------------------------------------------------------
-PATHCPP = .;
-PATHASM = .;
-PATHPAS = .;
-PATHRC = .;
-DEBUGLIBPATH = $(BCB)\lib\debug
-RELEASELIBPATH = $(BCB)\lib\release
-# ---------------------------------------------------------------------------
-CFLAG1 = -O2 -Ve -d -k- -vi
-CFLAG2 = -I$(BCB)\include;$(BCB)\include\vcl -H=$(BCB)\lib\vcl35.csm
-CFLAG3 = -ff -pr -5
-PFLAGS = -U;$(DEBUGLIBPATH) -I$(BCB)\include;$(BCB)\include\vcl -H -W -$I- -v -JPHN -M
-RFLAGS = -i$(BCB)\include;$(BCB)\include\vcl 
-AFLAGS = /i$(BCB)\include /i$(BCB)\include\vcl /mx /w2 /zn
-LFLAGS =
-IFLAGS = -g -Gn
-# ---------------------------------------------------------------------------
-ALLOBJ = c0w32.obj $(OBJFILES)
-ALLRES = $(RESFILES)
-ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cp32mt.lib
-# ---------------------------------------------------------------------------
-!!ifdef IDEOPTIONS
-
-[Version Info]
-IncludeVerInfo=0
-AutoIncBuild=0
-MajorVer=1
-MinorVer=0
-Release=0
-Build=0
-Debug=0
-PreRelease=0
-Special=0
-Private=0
-DLL=0
-Locale=1040
-CodePage=1252
-
-[Version Info Keys]
-CompanyName=
-FileDescription=
-FileVersion=1.0.0.0
-InternalName=
-LegalCopyright=
-LegalTrademarks=
-OriginalFilename=
-ProductName=
-ProductVersion=1.0.0.0
-Comments=
-
-[HistoryLists\hlIncludePath]
-Count=2
-Item0=$(BCB)\include
-Item1=$(BCB)\include;$(BCB)\include\vcl
-
-[HistoryLists\hlLibraryPath]
-Count=1
-Item0=$(BCB)\lib\obj;$(BCB)\lib
-
-[HistoryLists\hlDebugSourcePath]
-Count=1
-Item0=$(BCB)\source\vcl
-
-[Debugging]
-DebugSourceDirs=
-
-[Parameters]
-RunParams=
-HostApplication=
-
-!endif
-
- ---------------------------------------------------------------------------
-# MAKE SECTION
-# ---------------------------------------------------------------------------
-# This section of the project file is not used by the BCB IDE.  It is for
-# the benefit of building from the command-line using the MAKE utility.
-# ---------------------------------------------------------------------------
-
-.autodepend
-# ---------------------------------------------------------------------------
-!if !$d(BCC32)
-BCC32 = bcc32
-!endif
-
-!if !$d(DCC32)
-DCC32 = dcc32
-!endif
-
-!if !$d(TASM32)
-TASM32 = tasm32
-!endif
-
-!if !$d(LINKER)
-LINKER = TLib
-!endif
-
-!if !$d(BRCC32)
-BRCC32 = brcc32
-!endif
-# ---------------------------------------------------------------------------
-!if $d(PATHCPP)
-.PATH.CPP = $(PATHCPP)
-.PATH.C   = $(PATHCPP)
-!endif
-
-!if $d(PATHPAS)
-.PATH.PAS = $(PATHPAS)
-!endif
-
-!if $d(PATHASM)
-.PATH.ASM = $(PATHASM)
-!endif
-
-!if $d(PATHRC)
-.PATH.RC  = $(PATHRC)
-!endif
-# ---------------------------------------------------------------------------
-!ifdef IDEOPTIONS
-
-[Version Info]
-IncludeVerInfo=0
-AutoIncBuild=0
-MajorVer=1
-MinorVer=0
-Release=0
-Build=0
-Debug=0
-PreRelease=0
-Special=0
-Private=0
-DLL=0
-Locale=1040
-CodePage=1252
-
-[Version Info Keys]
-CompanyName=
-FileDescription=
-FileVersion=1.0.0.0
-InternalName=
-LegalCopyright=
-LegalTrademarks=
-OriginalFilename=
-ProductName=
-ProductVersion=1.0.0.0
-Comments=
-
-[HistoryLists\hlIncludePath]
-Count=2
-Item0=$(BCB)\include;$(BCB)\include\vcl
-Item1=$(BCB)\include
-
-[HistoryLists\hlLibraryPath]
-Count=1
-Item0=$(BCB)\lib\obj;$(BCB)\lib
-
-[HistoryLists\hlDebugSourcePath]
-Count=1
-Item0=$(BCB)\source\vcl
-
-[Debugging]
-DebugSourceDirs=
-
-[Parameters]
-RunParams=
-HostApplication=
-
-!endif
-
-$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
-    $(BCB)\BIN\$(LINKER) @&&!
-    $(LFLAGS) $(IFLAGS) +
-    $(ALLOBJ), +
-    $(PROJECT),, +
-    $(ALLLIB), +
-    $(DEFFILE), +
-    $(ALLRES)
-!
-# ---------------------------------------------------------------------------
-.pas.hpp:
-    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
-
-.pas.obj:
-    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
-
-.cpp.obj:
-    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
-
-.c.obj:
-    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
-
-.asm.obj:
-    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@
-
-.rc.res:
-    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
-# ---------------------------------------------------------------------------

contrib/delphi2/d_zlib.cpp

@@ -1,17 +0,0 @@
-#include <condefs.h>
-#pragma hdrstop
-//---------------------------------------------------------------------------
-USEUNIT("adler32.c");
-USEUNIT("deflate.c");
-USEUNIT("infblock.c");
-USEUNIT("infcodes.c");
-USEUNIT("inffast.c");
-USEUNIT("inflate.c");
-USEUNIT("inftrees.c");
-USEUNIT("infutil.c");
-USEUNIT("trees.c");
-//---------------------------------------------------------------------------
-#define Library
-
-// To add a file to the library use the Project menu 'Add to Project'.
-

contrib/delphi2/readme.txt

@@ -1,17 +0,0 @@
-These are files used to compile zlib under Borland C++ Builder 3.
-
-zlib.bpg is the main project group that can be loaded in the BCB IDE and
-loads all other *.bpr projects
-
-zlib.bpr is a project used to create a static zlib.lib library with C calling
-convention for functions.
-
-zlib32.bpr creates a zlib32.dll dynamic link library with Windows standard
-calling convention.
-
-d_zlib.bpr creates a set of .obj files with register calling convention.
-These files are used by zlib.pas to create a Delphi unit containing zlib.
-The d_zlib.lib file generated isn't useful and can be deleted.
-
-zlib.cpp, zlib32.cpp and d_zlib.cpp are used by the above projects.
-

contrib/delphi2/zlib.bpg

@@ -1,26 +0,0 @@
-#------------------------------------------------------------------------------
-VERSION = BWS.01
-#------------------------------------------------------------------------------
-!ifndef ROOT
-ROOT = $(MAKEDIR)\..
-!endif
-#------------------------------------------------------------------------------
-MAKE = $(ROOT)\bin\make.exe -$(MAKEFLAGS) -f$**
-DCC = $(ROOT)\bin\dcc32.exe $**
-BRCC = $(ROOT)\bin\brcc32.exe $**
-#------------------------------------------------------------------------------
-PROJECTS = zlib zlib32 d_zlib
-#------------------------------------------------------------------------------
-default: $(PROJECTS)
-#------------------------------------------------------------------------------
-
-zlib: zlib.bpr
-  $(MAKE)
-
-zlib32: zlib32.bpr
-  $(MAKE)
-
-d_zlib: d_zlib.bpr
-  $(MAKE)
-
-

contrib/delphi2/zlib.bpr

@@ -1,225 +0,0 @@
-# ---------------------------------------------------------------------------
-!if !$d(BCB)
-BCB = $(MAKEDIR)\..
-!endif
-
-# ---------------------------------------------------------------------------
-# IDE SECTION
-# ---------------------------------------------------------------------------
-# The following section of the project makefile is managed by the BCB IDE.
-# It is recommended to use the IDE to change any of the values in this
-# section.
-# ---------------------------------------------------------------------------
-
-VERSION = BCB.03
-# ---------------------------------------------------------------------------
-PROJECT = zlib.lib
-OBJFILES = zlib.obj adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infblock.obj \
-  infcodes.obj inffast.obj inflate.obj inftrees.obj infutil.obj trees.obj \
-  uncompr.obj zutil.obj
-RESFILES =
-RESDEPEN = $(RESFILES)
-LIBFILES =
-LIBRARIES = VCL35.lib
-SPARELIBS = VCL35.lib
-DEFFILE =
-PACKAGES = VCLX35.bpi VCL35.bpi VCLDB35.bpi VCLDBX35.bpi ibsmp35.bpi bcbsmp35.bpi \
-  dclocx35.bpi QRPT35.bpi TEEUI35.bpi TEEDB35.bpi TEE35.bpi DSS35.bpi \
-  NMFAST35.bpi INETDB35.bpi INET35.bpi VCLMID35.bpi
-# ---------------------------------------------------------------------------
-PATHCPP = .;
-PATHASM = .;
-PATHPAS = .;
-PATHRC = .;
-DEBUGLIBPATH = $(BCB)\lib\debug
-RELEASELIBPATH = $(BCB)\lib\release
-# ---------------------------------------------------------------------------
-CFLAG1 = -O2 -Ve -d -k- -vi
-CFLAG2 = -I$(BCB)\include;$(BCB)\include\vcl -H=$(BCB)\lib\vcl35.csm
-CFLAG3 = -ff -5
-PFLAGS = -U;$(DEBUGLIBPATH) -I$(BCB)\include;$(BCB)\include\vcl -H -W -$I- -v -JPHN -M
-RFLAGS = -i$(BCB)\include;$(BCB)\include\vcl 
-AFLAGS = /i$(BCB)\include /i$(BCB)\include\vcl /mx /w2 /zn
-LFLAGS =
-IFLAGS = -g -Gn
-# ---------------------------------------------------------------------------
-ALLOBJ = c0w32.obj $(OBJFILES)
-ALLRES = $(RESFILES)
-ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cp32mt.lib
-# ---------------------------------------------------------------------------
-!!ifdef IDEOPTIONS
-
-[Version Info]
-IncludeVerInfo=0
-AutoIncBuild=0
-MajorVer=1
-MinorVer=0
-Release=0
-Build=0
-Debug=0
-PreRelease=0
-Special=0
-Private=0
-DLL=0
-Locale=1040
-CodePage=1252
-
-[Version Info Keys]
-CompanyName=
-FileDescription=
-FileVersion=1.0.0.0
-InternalName=
-LegalCopyright=
-LegalTrademarks=
-OriginalFilename=
-ProductName=
-ProductVersion=1.0.0.0
-Comments=
-
-[HistoryLists\hlIncludePath]
-Count=2
-Item0=$(BCB)\include
-Item1=$(BCB)\include;$(BCB)\include\vcl
-
-[HistoryLists\hlLibraryPath]
-Count=1
-Item0=$(BCB)\lib\obj;$(BCB)\lib
-
-[HistoryLists\hlDebugSourcePath]
-Count=1
-Item0=$(BCB)\source\vcl
-
-[Debugging]
-DebugSourceDirs=
-
-[Parameters]
-RunParams=
-HostApplication=
-
-!endif
-
- ---------------------------------------------------------------------------
-# MAKE SECTION
-# ---------------------------------------------------------------------------
-# This section of the project file is not used by the BCB IDE.  It is for
-# the benefit of building from the command-line using the MAKE utility.
-# ---------------------------------------------------------------------------
-
-.autodepend
-# ---------------------------------------------------------------------------
-!if !$d(BCC32)
-BCC32 = bcc32
-!endif
-
-!if !$d(DCC32)
-DCC32 = dcc32
-!endif
-
-!if !$d(TASM32)
-TASM32 = tasm32
-!endif
-
-!if !$d(LINKER)
-LINKER = TLib
-!endif
-
-!if !$d(BRCC32)
-BRCC32 = brcc32
-!endif
-# ---------------------------------------------------------------------------
-!if $d(PATHCPP)
-.PATH.CPP = $(PATHCPP)
-.PATH.C   = $(PATHCPP)
-!endif
-
-!if $d(PATHPAS)
-.PATH.PAS = $(PATHPAS)
-!endif
-
-!if $d(PATHASM)
-.PATH.ASM = $(PATHASM)
-!endif
-
-!if $d(PATHRC)
-.PATH.RC  = $(PATHRC)
-!endif
-# ---------------------------------------------------------------------------
-!ifdef IDEOPTIONS
-
-[Version Info]
-IncludeVerInfo=0
-AutoIncBuild=0
-MajorVer=1
-MinorVer=0
-Release=0
-Build=0
-Debug=0
-PreRelease=0
-Special=0
-Private=0
-DLL=0
-Locale=1040
-CodePage=1252
-
-[Version Info Keys]
-CompanyName=
-FileDescription=
-FileVersion=1.0.0.0
-InternalName=
-LegalCopyright=
-LegalTrademarks=
-OriginalFilename=
-ProductName=
-ProductVersion=1.0.0.0
-Comments=
-
-[HistoryLists\hlIncludePath]
-Count=2
-Item0=$(BCB)\include;$(BCB)\include\vcl
-Item1=$(BCB)\include
-
-[HistoryLists\hlLibraryPath]
-Count=1
-Item0=$(BCB)\lib\obj;$(BCB)\lib
-
-[HistoryLists\hlDebugSourcePath]
-Count=1
-Item0=$(BCB)\source\vcl
-
-[Debugging]
-DebugSourceDirs=
-
-[Parameters]
-RunParams=
-HostApplication=
-
-!endif
-
-$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
-    $(BCB)\BIN\$(LINKER) @&&!
-    $(LFLAGS) $(IFLAGS) +
-    $(ALLOBJ), +
-    $(PROJECT),, +
-    $(ALLLIB), +
-    $(DEFFILE), +
-    $(ALLRES)
-!
-# ---------------------------------------------------------------------------
-.pas.hpp:
-    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
-
-.pas.obj:
-    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
-
-.cpp.obj:
-    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
-
-.c.obj:
-    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
-
-.asm.obj:
-    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@
-
-.rc.res:
-    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
-# ---------------------------------------------------------------------------

contrib/delphi2/zlib.cpp

@@ -1,22 +0,0 @@
-#include <condefs.h>
-#pragma hdrstop
-//---------------------------------------------------------------------------
-USEUNIT("adler32.c");
-USEUNIT("compress.c");
-USEUNIT("crc32.c");
-USEUNIT("deflate.c");
-USEUNIT("gzio.c");
-USEUNIT("infblock.c");
-USEUNIT("infcodes.c");
-USEUNIT("inffast.c");
-USEUNIT("inflate.c");
-USEUNIT("inftrees.c");
-USEUNIT("infutil.c");
-USEUNIT("trees.c");
-USEUNIT("uncompr.c");
-USEUNIT("zutil.c");
-//---------------------------------------------------------------------------
-#define Library
-
-// To add a file to the library use the Project menu 'Add to Project'.
-

contrib/delphi2/zlib32.bpr

@@ -1,174 +0,0 @@
-# ---------------------------------------------------------------------------
-!if !$d(BCB)
-BCB = $(MAKEDIR)\..
-!endif
-
-# ---------------------------------------------------------------------------
-# IDE SECTION
-# ---------------------------------------------------------------------------
-# The following section of the project makefile is managed by the BCB IDE.
-# It is recommended to use the IDE to change any of the values in this
-# section.
-# ---------------------------------------------------------------------------
-
-VERSION = BCB.03
-# ---------------------------------------------------------------------------
-PROJECT = zlib32.dll
-OBJFILES = zlib32.obj adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infblock.obj \
-  infcodes.obj inffast.obj inflate.obj inftrees.obj infutil.obj trees.obj \
-  uncompr.obj zutil.obj
-RESFILES =
-RESDEPEN = $(RESFILES)
-LIBFILES =
-LIBRARIES = 
-SPARELIBS = 
-DEFFILE =
-PACKAGES = VCLX35.bpi VCL35.bpi VCLDB35.bpi VCLDBX35.bpi ibsmp35.bpi bcbsmp35.bpi \
-  dclocx35.bpi QRPT35.bpi TEEUI35.bpi TEEDB35.bpi TEE35.bpi DSS35.bpi \
-  NMFAST35.bpi INETDB35.bpi INET35.bpi VCLMID35.bpi
-# ---------------------------------------------------------------------------
-PATHCPP = .;
-PATHASM = .;
-PATHPAS = .;
-PATHRC = .;
-DEBUGLIBPATH = $(BCB)\lib\debug
-RELEASELIBPATH = $(BCB)\lib\release
-# ---------------------------------------------------------------------------
-CFLAG1 = -WD -O2 -Ve -d -k- -vi -c -tWD
-CFLAG2 = -D_NO_VCL;ZLIB_DLL -I$(BCB)\include
-CFLAG3 = -ff -5
-PFLAGS = -D_NO_VCL;ZLIB_DLL -U$(BCB)\lib;$(RELEASELIBPATH) -I$(BCB)\include -$I- -v \
-  -JPHN -M
-RFLAGS = -D_NO_VCL;ZLIB_DLL -i$(BCB)\include
-AFLAGS = /i$(BCB)\include /d_NO_VCL /dZLIB_DLL /mx /w2 /zn
-LFLAGS = -L$(BCB)\lib;$(RELEASELIBPATH) -aa -Tpd -x -Gi
-IFLAGS = -Gn -g
-# ---------------------------------------------------------------------------
-ALLOBJ = c0d32.obj $(OBJFILES)
-ALLRES = $(RESFILES)
-ALLLIB = $(LIBFILES)  import32.lib cw32mt.lib
-# ---------------------------------------------------------------------------
-!ifdef IDEOPTIONS
-
-[Version Info]
-IncludeVerInfo=0
-AutoIncBuild=0
-MajorVer=1
-MinorVer=0
-Release=0
-Build=0
-Debug=0
-PreRelease=0
-Special=0
-Private=0
-DLL=1
-Locale=1040
-CodePage=1252
-
-[Version Info Keys]
-CompanyName=
-FileDescription=DLL (GUI)
-FileVersion=1.0.0.0
-InternalName=
-LegalCopyright=
-LegalTrademarks=
-OriginalFilename=
-ProductName=
-ProductVersion=1.0.0.0
-Comments=
-
-[HistoryLists\hlIncludePath]
-Count=1
-Item0=$(BCB)\include
-
-[HistoryLists\hlLibraryPath]
-Count=1
-Item0=$(BCB)\lib
-
-[HistoryLists\hlConditionals]
-Count=1
-Item0=_NO_VCL;ZLIB_DLL
-
-[Debugging]
-DebugSourceDirs=
-
-[Parameters]
-RunParams=
-HostApplication=
-
-!endif
-
-# ---------------------------------------------------------------------------
-# MAKE SECTION
-# ---------------------------------------------------------------------------
-# This section of the project file is not used by the BCB IDE.  It is for
-# the benefit of building from the command-line using the MAKE utility.
-# ---------------------------------------------------------------------------
-
-.autodepend
-# ---------------------------------------------------------------------------
-!if !$d(BCC32)
-BCC32 = bcc32
-!endif
-
-!if !$d(DCC32)
-DCC32 = dcc32
-!endif
-
-!if !$d(TASM32)
-TASM32 = tasm32
-!endif
-
-!if !$d(LINKER)
-LINKER = ilink32
-!endif
-
-!if !$d(BRCC32)
-BRCC32 = brcc32
-!endif
-# ---------------------------------------------------------------------------
-!if $d(PATHCPP)
-.PATH.CPP = $(PATHCPP)
-.PATH.C   = $(PATHCPP)
-!endif
-
-!if $d(PATHPAS)
-.PATH.PAS = $(PATHPAS)
-!endif
-
-!if $d(PATHASM)
-.PATH.ASM = $(PATHASM)
-!endif
-
-!if $d(PATHRC)
-.PATH.RC  = $(PATHRC)
-!endif
-# ---------------------------------------------------------------------------
-$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
-    $(BCB)\BIN\$(LINKER) @&&!
-    $(LFLAGS) $(IFLAGS) +
-    $(ALLOBJ), +
-    $(PROJECT),, +
-    $(ALLLIB), +
-    $(DEFFILE), +
-    $(ALLRES)
-!
-# ---------------------------------------------------------------------------
-.pas.hpp:
-    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
-
-.pas.obj:
-    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
-
-.cpp.obj:
-    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
-
-.c.obj:
-    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
-
-.asm.obj:
-    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@
-
-.rc.res:
-    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
-# ---------------------------------------------------------------------------

contrib/delphi2/zlib32.cpp

@@ -1,42 +0,0 @@
-
-#include <windows.h>
-#pragma hdrstop
-#include <condefs.h>
-
-
-//---------------------------------------------------------------------------
-//   Important note about DLL memory management in a VCL DLL:
-//
-//
-//
-// If your DLL uses VCL and exports any functions that pass VCL String objects
-// (or structs/classes containing nested Strings) as parameter or function
-// results, you will need to build both your DLL project and any EXE projects
-// that use your DLL with the dynamic RTL (the RTL DLL).  This will change your
-// DLL and its calling EXE's to use BORLNDMM.DLL as their memory manager. In
-// these cases, the file BORLNDMM.DLL should be deployed along with your DLL
-// and the RTL DLL (CP3240MT.DLL). To avoid the requiring BORLNDMM.DLL in
-// these situations, pass string information using "char *" or ShortString
-// parameters and then link with the static RTL.
-//
-//---------------------------------------------------------------------------
-USEUNIT("adler32.c");
-USEUNIT("compress.c");
-USEUNIT("crc32.c");
-USEUNIT("deflate.c");
-USEUNIT("gzio.c");
-USEUNIT("infblock.c");
-USEUNIT("infcodes.c");
-USEUNIT("inffast.c");
-USEUNIT("inflate.c");
-USEUNIT("inftrees.c");
-USEUNIT("infutil.c");
-USEUNIT("trees.c");
-USEUNIT("uncompr.c");
-USEUNIT("zutil.c");
-//---------------------------------------------------------------------------
-#pragma argsused
-int WINAPI DllEntryPoint(HINSTANCE hinst, unsigned long reason, void*)
-{
-        return 1;
-}

contrib/dotzlib/DotZLib.build

@@ -0,0 +1,33 @@
+<?xml version="1.0" encoding="utf-8" ?>
+<project name="DotZLib" default="build" basedir="./DotZLib">
+	<description>A .Net wrapper library around ZLib1.dll</description>
+
+	<property name="nunit.location" value="c:/program files/NUnit V2.1/bin" />
+	<property name="build.root" value="bin" />
+
+	<property name="debug" value="true" />
+	<property name="nunit" value="true" />
+
+	<property name="build.folder" value="${build.root}/debug/" if="${debug}" />
+	<property name="build.folder" value="${build.root}/release/" unless="${debug}" />
+
+	<target name="clean" description="Remove all generated files">
+		<delete dir="${build.root}" failonerror="false" />
+	</target>
+
+	<target name="build" description="compiles the source code">
+
+		<mkdir dir="${build.folder}" />
+		<csc target="library" output="${build.folder}DotZLib.dll" debug="${debug}">
+			<references basedir="${nunit.location}">
+				<includes if="${nunit}" name="nunit.framework.dll" />
+			</references>
+			<sources>
+				<includes name="*.cs" />
+				<excludes name="UnitTests.cs" unless="${nunit}" />
+			</sources>
+			<arg value="/d:nunit" if="${nunit}" />
+		</csc>
+	</target>
+
+</project>

contrib/dotzlib/DotZLib.sln

@@ -0,0 +1,21 @@
+Microsoft Visual Studio Solution File, Format Version 8.00
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "DotZLib", "DotZLib\DotZLib.csproj", "{BB1EE0B1-1808-46CB-B786-949D91117FC5}"
+	ProjectSection(ProjectDependencies) = postProject
+	EndProjectSection
+EndProject
+Global
+	GlobalSection(SolutionConfiguration) = preSolution
+		Debug = Debug
+		Release = Release
+	EndGlobalSection
+	GlobalSection(ProjectConfiguration) = postSolution
+		{BB1EE0B1-1808-46CB-B786-949D91117FC5}.Debug.ActiveCfg = Debug|.NET
+		{BB1EE0B1-1808-46CB-B786-949D91117FC5}.Debug.Build.0 = Debug|.NET
+		{BB1EE0B1-1808-46CB-B786-949D91117FC5}.Release.ActiveCfg = Release|.NET
+		{BB1EE0B1-1808-46CB-B786-949D91117FC5}.Release.Build.0 = Release|.NET
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+	EndGlobalSection
+	GlobalSection(ExtensibilityAddIns) = postSolution
+	EndGlobalSection
+EndGlobal

contrib/dotzlib/DotZLib/AssemblyInfo.cs

@@ -0,0 +1,58 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("DotZLib")]
+[assembly: AssemblyDescription(".Net bindings for ZLib compression dll 1.2.x")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("Henrik Ravn")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("(c) 2004 by Henrik Ravn")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.0.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing.
+//
+// Notes:
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+[assembly: AssemblyKeyFile("")]
+[assembly: AssemblyKeyName("")]

contrib/dotzlib/DotZLib/ChecksumImpl.cs

@@ -0,0 +1,202 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Runtime.InteropServices;
+using System.Text;
+
+
+namespace DotZLib
+{
+    #region ChecksumGeneratorBase
+    /// <summary>
+    /// Implements the common functionality needed for all <see cref="ChecksumGenerator"/>s
+    /// </summary>
+    /// <example></example>
+    public abstract class ChecksumGeneratorBase : ChecksumGenerator
+    {
+        /// <summary>
+        /// The value of the current checksum
+        /// </summary>
+        protected uint _current;
+
+        /// <summary>
+        /// Initializes a new instance of the checksum generator base - the current checksum is
+        /// set to zero
+        /// </summary>
+        public ChecksumGeneratorBase()
+        {
+            _current = 0;
+        }
+
+        /// <summary>
+        /// Initializes a new instance of the checksum generator basewith a specified value
+        /// </summary>
+        /// <param name="initialValue">The value to set the current checksum to</param>
+        public ChecksumGeneratorBase(uint initialValue)
+        {
+            _current = initialValue;
+        }
+
+        /// <summary>
+        /// Resets the current checksum to zero
+        /// </summary>
+        public void Reset() { _current = 0; }
+
+        /// <summary>
+        /// Gets the current checksum value
+        /// </summary>
+        public uint Value { get { return _current; } }
+
+        /// <summary>
+        /// Updates the current checksum with part of an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        /// <param name="offset">Where in <c>data</c> to start updating</param>
+        /// <param name="count">The number of bytes from <c>data</c> to use</param>
+        /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+        /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>
+        /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+        /// <remarks>All the other <c>Update</c> methods are implmeneted in terms of this one.
+        /// This is therefore the only method a derived class has to implement</remarks>
+        public abstract void Update(byte[] data, int offset, int count);
+
+        /// <summary>
+        /// Updates the current checksum with an array of bytes.
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        public void Update(byte[] data)
+        {
+            Update(data, 0, data.Length);
+        }
+
+        /// <summary>
+        /// Updates the current checksum with the data from a string
+        /// </summary>
+        /// <param name="data">The string to update the checksum with</param>
+        /// <remarks>The characters in the string are converted by the UTF-8 encoding</remarks>
+        public void Update(string data)
+        {
+			Update(Encoding.UTF8.GetBytes(data));
+        }
+
+        /// <summary>
+        /// Updates the current checksum with the data from a string, using a specific encoding
+        /// </summary>
+        /// <param name="data">The string to update the checksum with</param>
+        /// <param name="encoding">The encoding to use</param>
+        public void Update(string data, Encoding encoding)
+        {
+            Update(encoding.GetBytes(data));
+        }
+
+    }
+    #endregion
+
+    #region CRC32
+    /// <summary>
+    /// Implements a CRC32 checksum generator
+    /// </summary>
+    public sealed class CRC32Checksum : ChecksumGeneratorBase
+    {
+        #region DLL imports
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern uint crc32(uint crc, int data, uint length);
+
+        #endregion
+
+        /// <summary>
+        /// Initializes a new instance of the CRC32 checksum generator
+        /// </summary>
+        public CRC32Checksum() : base() {}
+
+        /// <summary>
+        /// Initializes a new instance of the CRC32 checksum generator with a specified value
+        /// </summary>
+        /// <param name="initialValue">The value to set the current checksum to</param>
+        public CRC32Checksum(uint initialValue) : base(initialValue) {}
+
+        /// <summary>
+        /// Updates the current checksum with part of an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        /// <param name="offset">Where in <c>data</c> to start updating</param>
+        /// <param name="count">The number of bytes from <c>data</c> to use</param>
+        /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+        /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>
+        /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+        public override void Update(byte[] data, int offset, int count)
+        {
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > data.Length) throw new ArgumentException();
+            GCHandle hData = GCHandle.Alloc(data, GCHandleType.Pinned);
+            try
+            {
+                _current = crc32(_current, hData.AddrOfPinnedObject().ToInt32()+offset, (uint)count);
+            }
+            finally
+            {
+                hData.Free();
+            }
+        }
+
+    }
+    #endregion
+
+    #region Adler
+    /// <summary>
+    /// Implements a checksum generator that computes the Adler checksum on data
+    /// </summary>
+    public sealed class AdlerChecksum : ChecksumGeneratorBase
+    {
+        #region DLL imports
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern uint adler32(uint adler, int data, uint length);
+
+        #endregion
+
+        /// <summary>
+        /// Initializes a new instance of the Adler checksum generator
+        /// </summary>
+        public AdlerChecksum() : base() {}
+
+        /// <summary>
+        /// Initializes a new instance of the Adler checksum generator with a specified value
+        /// </summary>
+        /// <param name="initialValue">The value to set the current checksum to</param>
+        public AdlerChecksum(uint initialValue) : base(initialValue) {}
+
+        /// <summary>
+        /// Updates the current checksum with part of an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        /// <param name="offset">Where in <c>data</c> to start updating</param>
+        /// <param name="count">The number of bytes from <c>data</c> to use</param>
+        /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+        /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>
+        /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+        public override void Update(byte[] data, int offset, int count)
+        {
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > data.Length) throw new ArgumentException();
+            GCHandle hData = GCHandle.Alloc(data, GCHandleType.Pinned);
+            try
+            {
+                _current = adler32(_current, hData.AddrOfPinnedObject().ToInt32()+offset, (uint)count);
+            }
+            finally
+            {
+                hData.Free();
+            }
+        }
+
+    }
+    #endregion
+
+}

contrib/dotzlib/DotZLib/CircularBuffer.cs

@@ -0,0 +1,83 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Diagnostics;
+
+namespace DotZLib
+{
+
+	/// <summary>
+	/// This class implements a circular buffer
+	/// </summary>
+	internal class CircularBuffer
+	{
+        #region Private data
+        private int _capacity;
+        private int _head;
+        private int _tail;
+        private int _size;
+        private byte[] _buffer;
+        #endregion
+
+        public CircularBuffer(int capacity)
+        {
+            Debug.Assert( capacity > 0 );
+            _buffer = new byte[capacity];
+            _capacity = capacity;
+            _head = 0;
+            _tail = 0;
+            _size = 0;
+        }
+
+        public int Size { get { return _size; } }
+
+        public int Put(byte[] source, int offset, int count)
+        {
+            Debug.Assert( count > 0 );
+            int trueCount = Math.Min(count, _capacity - Size);
+            for (int i = 0; i < trueCount; ++i)
+                _buffer[(_tail+i) % _capacity] = source[offset+i];
+            _tail += trueCount;
+            _tail %= _capacity;
+            _size += trueCount;
+            return trueCount;
+        }
+
+        public bool Put(byte b)
+        {
+            if (Size == _capacity) // no room
+                return false;
+            _buffer[_tail++] = b;
+            _tail %= _capacity;
+            ++_size;
+            return true;
+        }
+
+        public int Get(byte[] destination, int offset, int count)
+        {
+            int trueCount = Math.Min(count,Size);
+            for (int i = 0; i < trueCount; ++i)
+                destination[offset + i] = _buffer[(_head+i) % _capacity];
+            _head += trueCount;
+            _head %= _capacity;
+            _size -= trueCount;
+            return trueCount;
+        }
+
+        public int Get()
+        {
+            if (Size == 0)
+                return -1;
+
+            int result = (int)_buffer[_head++ % _capacity];
+            --_size;
+            return result;
+        }
+
+    }
+}

contrib/dotzlib/DotZLib/CodecBase.cs

@@ -0,0 +1,198 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+	/// <summary>
+	/// Implements the common functionality needed for all <see cref="Codec"/>s
+	/// </summary>
+	public abstract class CodecBase : Codec, IDisposable
+	{
+
+        #region Data members
+
+        /// <summary>
+        /// Instance of the internal zlib buffer structure that is
+        /// passed to all functions in the zlib dll
+        /// </summary>
+        internal ZStream _ztream = new ZStream();
+
+        /// <summary>
+        /// True if the object instance has been disposed, false otherwise
+        /// </summary>
+        protected bool _isDisposed = false;
+
+        /// <summary>
+        /// The size of the internal buffers
+        /// </summary>
+        protected const int kBufferSize = 16384;
+
+        private byte[] _outBuffer = new byte[kBufferSize];
+        private byte[] _inBuffer = new byte[kBufferSize];
+
+        private GCHandle _hInput;
+        private GCHandle _hOutput;
+
+        private uint _checksum = 0;
+
+        #endregion
+
+        /// <summary>
+        /// Initializes a new instance of the <c>CodeBase</c> class.
+        /// </summary>
+		public CodecBase()
+		{
+            try
+            {
+                _hInput = GCHandle.Alloc(_inBuffer, GCHandleType.Pinned);
+                _hOutput = GCHandle.Alloc(_outBuffer, GCHandleType.Pinned);
+            }
+            catch (Exception)
+            {
+                CleanUp(false);
+                throw;
+            }
+        }
+
+
+        #region Codec Members
+
+        /// <summary>
+        /// Occurs when more processed data are available.
+        /// </summary>
+        public event DataAvailableHandler DataAvailable;
+
+        /// <summary>
+        /// Fires the <see cref="DataAvailable"/> event
+        /// </summary>
+        protected void OnDataAvailable()
+        {
+            if (_ztream.total_out > 0)
+            {
+                if (DataAvailable != null)
+                    DataAvailable( _outBuffer, 0, (int)_ztream.total_out);
+                resetOutput();
+            }
+        }
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        public void Add(byte[] data)
+        {
+            Add(data,0,data.Length);
+        }
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+        /// <param name="count">The number of bytes to add</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        /// <remarks>This must be implemented by a derived class</remarks>
+        public abstract void Add(byte[] data, int offset, int count);
+
+        /// <summary>
+        /// Finishes up any pending data that needs to be processed and handled.
+        /// </summary>
+        /// <remarks>This must be implemented by a derived class</remarks>
+        public abstract void Finish();
+
+        /// <summary>
+        /// Gets the checksum of the data that has been added so far
+        /// </summary>
+        public uint Checksum { get { return _checksum; } }
+
+        #endregion
+
+        #region Destructor & IDisposable stuff
+
+        /// <summary>
+        /// Destroys this instance
+        /// </summary>
+        ~CodecBase()
+        {
+            CleanUp(false);
+        }
+
+        /// <summary>
+        /// Releases any unmanaged resources and calls the <see cref="CleanUp()"/> method of the derived class
+        /// </summary>
+        public void Dispose()
+        {
+            CleanUp(true);
+        }
+
+        /// <summary>
+        /// Performs any codec specific cleanup
+        /// </summary>
+        /// <remarks>This must be implemented by a derived class</remarks>
+        protected abstract void CleanUp();
+
+        // performs the release of the handles and calls the dereived CleanUp()
+        private void CleanUp(bool isDisposing)
+        {
+            if (!_isDisposed)
+            {
+                CleanUp();
+                if (_hInput.IsAllocated)
+                    _hInput.Free();
+                if (_hOutput.IsAllocated)
+                    _hOutput.Free();
+
+                _isDisposed = true;
+            }
+        }
+
+
+        #endregion
+
+        #region Helper methods
+
+        /// <summary>
+        /// Copies a number of bytes to the internal codec buffer - ready for proccesing
+        /// </summary>
+        /// <param name="data">The byte array that contains the data to copy</param>
+        /// <param name="startIndex">The index of the first byte to copy</param>
+        /// <param name="count">The number of bytes to copy from <c>data</c></param>
+        protected void copyInput(byte[] data, int startIndex, int count)
+        {
+            Array.Copy(data, startIndex, _inBuffer,0, count);
+            _ztream.next_in = _hInput.AddrOfPinnedObject();
+            _ztream.total_in = 0;
+            _ztream.avail_in = (uint)count;
+
+        }
+
+        /// <summary>
+        /// Resets the internal output buffers to a known state - ready for processing
+        /// </summary>
+        protected void resetOutput()
+        {
+            _ztream.total_out = 0;
+            _ztream.avail_out = kBufferSize;
+            _ztream.next_out = _hOutput.AddrOfPinnedObject();
+        }
+
+        /// <summary>
+        /// Updates the running checksum property
+        /// </summary>
+        /// <param name="newSum">The new checksum value</param>
+        protected void setChecksum(uint newSum)
+        {
+            _checksum = newSum;
+        }
+        #endregion
+
+    }
+}

contrib/dotzlib/DotZLib/Deflater.cs

@@ -0,0 +1,106 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Diagnostics;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+
+    /// <summary>
+    /// Implements a data compressor, using the deflate algorithm in the ZLib dll
+    /// </summary>
+	public sealed class Deflater : CodecBase
+	{
+        #region Dll imports
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)]
+        private static extern int deflateInit_(ref ZStream sz, int level, string vs, int size);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int deflate(ref ZStream sz, int flush);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int deflateReset(ref ZStream sz);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int deflateEnd(ref ZStream sz);
+        #endregion
+
+        /// <summary>
+        /// Constructs an new instance of the <c>Deflater</c>
+        /// </summary>
+        /// <param name="level">The compression level to use for this <c>Deflater</c></param>
+		public Deflater(CompressLevel level) : base()
+		{
+            int retval = deflateInit_(ref _ztream, (int)level, Info.Version, Marshal.SizeOf(_ztream));
+            if (retval != 0)
+                throw new ZLibException(retval, "Could not initialize deflater");
+
+            resetOutput();
+		}
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+        /// <param name="count">The number of bytes to add</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        public override void Add(byte[] data, int offset, int count)
+        {
+            if (data == null) throw new ArgumentNullException();
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > data.Length) throw new ArgumentException();
+
+            int total = count;
+            int inputIndex = offset;
+            int err = 0;
+
+            while (err >= 0 && inputIndex < total)
+            {
+                copyInput(data, inputIndex, Math.Min(total - inputIndex, kBufferSize));
+                while (err >= 0 && _ztream.avail_in > 0)
+                {
+                    err = deflate(ref _ztream, (int)FlushTypes.None);
+                    if (err == 0)
+                        while (_ztream.avail_out == 0)
+                        {
+                            OnDataAvailable();
+                            err = deflate(ref _ztream, (int)FlushTypes.None);
+                        }
+                    inputIndex += (int)_ztream.total_in;
+                }
+            }
+            setChecksum( _ztream.adler );
+        }
+
+
+        /// <summary>
+        /// Finishes up any pending data that needs to be processed and handled.
+        /// </summary>
+        public override void Finish()
+        {
+            int err;
+            do
+            {
+                err = deflate(ref _ztream, (int)FlushTypes.Finish);
+                OnDataAvailable();
+            }
+            while (err == 0);
+            setChecksum( _ztream.adler );
+            deflateReset(ref _ztream);
+            resetOutput();
+        }
+
+        /// <summary>
+        /// Closes the internal zlib deflate stream
+        /// </summary>
+        protected override void CleanUp() { deflateEnd(ref _ztream); }
+
+    }
+}

contrib/dotzlib/DotZLib/DotZLib.cs

@@ -0,0 +1,288 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.IO;
+using System.Runtime.InteropServices;
+using System.Text;
+
+
+namespace DotZLib
+{
+
+    #region Internal types
+
+    /// <summary>
+    /// Defines constants for the various flush types used with zlib
+    /// </summary>
+    internal enum FlushTypes
+    {
+        None,  Partial,  Sync,  Full,  Finish,  Block
+    }
+
+    #region ZStream structure
+    // internal mapping of the zlib zstream structure for marshalling
+    [StructLayoutAttribute(LayoutKind.Sequential, Pack=4, Size=0, CharSet=CharSet.Ansi)]
+    internal struct ZStream
+    {
+        public IntPtr next_in;
+        public uint avail_in;
+        public uint total_in;
+
+        public IntPtr next_out;
+        public uint avail_out;
+        public uint total_out;
+
+        [MarshalAs(UnmanagedType.LPStr)]
+        string msg;
+        uint state;
+
+        uint zalloc;
+        uint zfree;
+        uint opaque;
+
+        int data_type;
+        public uint adler;
+        uint reserved;
+    }
+
+    #endregion
+
+    #endregion
+
+    #region Public enums
+    /// <summary>
+    /// Defines constants for the available compression levels in zlib
+    /// </summary>
+    public enum CompressLevel : int
+    {
+        /// <summary>
+        /// The default compression level with a reasonable compromise between compression and speed
+        /// </summary>
+        Default = -1,
+        /// <summary>
+        /// No compression at all. The data are passed straight through.
+        /// </summary>
+        None = 0,
+        /// <summary>
+        /// The maximum compression rate available.
+        /// </summary>
+        Best = 9,
+        /// <summary>
+        /// The fastest available compression level.
+        /// </summary>
+        Fastest = 1
+    }
+    #endregion
+
+    #region Exception classes
+    /// <summary>
+    /// The exception that is thrown when an error occurs on the zlib dll
+    /// </summary>
+    public class ZLibException : ApplicationException
+    {
+        /// <summary>
+        /// Initializes a new instance of the <see cref="ZLibException"/> class with a specified
+        /// error message and error code
+        /// </summary>
+        /// <param name="errorCode">The zlib error code that caused the exception</param>
+        /// <param name="msg">A message that (hopefully) describes the error</param>
+        public ZLibException(int errorCode, string msg) : base(String.Format("ZLib error {0} {1}", errorCode, msg))
+        {
+        }
+
+        /// <summary>
+        /// Initializes a new instance of the <see cref="ZLibException"/> class with a specified
+        /// error code
+        /// </summary>
+        /// <param name="errorCode">The zlib error code that caused the exception</param>
+        public ZLibException(int errorCode) : base(String.Format("ZLib error {0}", errorCode))
+        {
+        }
+    }
+    #endregion
+
+    #region Interfaces
+
+    /// <summary>
+    /// Declares methods and properties that enables a running checksum to be calculated
+    /// </summary>
+    public interface ChecksumGenerator
+    {
+        /// <summary>
+        /// Gets the current value of the checksum
+        /// </summary>
+        uint Value { get; }
+
+        /// <summary>
+        /// Clears the current checksum to 0
+        /// </summary>
+        void Reset();
+
+        /// <summary>
+        /// Updates the current checksum with an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        void Update(byte[] data);
+
+        /// <summary>
+        /// Updates the current checksum with part of an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        /// <param name="offset">Where in <c>data</c> to start updating</param>
+        /// <param name="count">The number of bytes from <c>data</c> to use</param>
+        /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+        /// <exception cref="ArgumentNullException"><c>data</c> is a null reference</exception>
+        /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+        void Update(byte[] data, int offset, int count);
+
+        /// <summary>
+        /// Updates the current checksum with the data from a string
+        /// </summary>
+        /// <param name="data">The string to update the checksum with</param>
+        /// <remarks>The characters in the string are converted by the UTF-8 encoding</remarks>
+        void Update(string data);
+
+        /// <summary>
+        /// Updates the current checksum with the data from a string, using a specific encoding
+        /// </summary>
+        /// <param name="data">The string to update the checksum with</param>
+        /// <param name="encoding">The encoding to use</param>
+        void Update(string data, Encoding encoding);
+    }
+
+
+    /// <summary>
+    /// Represents the method that will be called from a codec when new data
+    /// are available.
+    /// </summary>
+    /// <paramref name="data">The byte array containing the processed data</paramref>
+    /// <paramref name="startIndex">The index of the first processed byte in <c>data</c></paramref>
+    /// <paramref name="count">The number of processed bytes available</paramref>
+    /// <remarks>On return from this method, the data may be overwritten, so grab it while you can.
+    /// You cannot assume that startIndex will be zero.
+    /// </remarks>
+    public delegate void DataAvailableHandler(byte[] data, int startIndex, int count);
+
+    /// <summary>
+    /// Declares methods and events for implementing compressors/decompressors
+    /// </summary>
+    public interface Codec
+    {
+        /// <summary>
+        /// Occurs when more processed data are available.
+        /// </summary>
+        event DataAvailableHandler DataAvailable;
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        void Add(byte[] data);
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+        /// <param name="count">The number of bytes to add</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        void Add(byte[] data, int offset, int count);
+
+        /// <summary>
+        /// Finishes up any pending data that needs to be processed and handled.
+        /// </summary>
+        void Finish();
+
+        /// <summary>
+        /// Gets the checksum of the data that has been added so far
+        /// </summary>
+        uint Checksum { get; }
+
+
+    }
+
+    #endregion
+
+    #region Classes
+    /// <summary>
+    /// Encapsulates general information about the ZLib library
+    /// </summary>
+    public class Info
+    {
+        #region DLL imports
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern uint zlibCompileFlags();
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern string zlibVersion();
+        #endregion
+
+        #region Private stuff
+        private uint _flags;
+
+        // helper function that unpacks a bitsize mask
+        private static int bitSize(uint bits)
+        {
+            switch (bits)
+            {
+                case 0: return 16;
+                case 1: return 32;
+                case 2: return 64;
+            }
+            return -1;
+        }
+        #endregion
+
+        /// <summary>
+        /// Constructs an instance of the <c>Info</c> class.
+        /// </summary>
+        public Info()
+        {
+            _flags = zlibCompileFlags();
+        }
+
+        /// <summary>
+        /// True if the library is compiled with debug info
+        /// </summary>
+        public bool HasDebugInfo { get { return 0 != (_flags & 0x100); } }
+
+        /// <summary>
+        /// True if the library is compiled with assembly optimizations
+        /// </summary>
+        public bool UsesAssemblyCode { get { return 0 != (_flags & 0x200); } }
+
+        /// <summary>
+        /// Gets the size of the unsigned int that was compiled into Zlib
+        /// </summary>
+        public int SizeOfUInt { get { return bitSize(_flags & 3); } }
+
+        /// <summary>
+        /// Gets the size of the unsigned long that was compiled into Zlib
+        /// </summary>
+        public int SizeOfULong { get { return bitSize((_flags >> 2) & 3); } }
+
+        /// <summary>
+        /// Gets the size of the pointers that were compiled into Zlib
+        /// </summary>
+        public int SizeOfPointer { get { return bitSize((_flags >> 4) & 3); } }
+
+        /// <summary>
+        /// Gets the size of the z_off_t type that was compiled into Zlib
+        /// </summary>
+        public int SizeOfOffset { get { return bitSize((_flags >> 6) & 3); } }
+
+        /// <summary>
+        /// Gets the version of ZLib as a string, e.g. "1.2.1"
+        /// </summary>
+        public static string Version { get { return zlibVersion(); } }
+    }
+
+    #endregion
+
+}

contrib/dotzlib/DotZLib/DotZLib.csproj

@@ -0,0 +1,141 @@
+<VisualStudioProject>
+    <CSHARP
+        ProjectType = "Local"
+        ProductVersion = "7.10.3077"
+        SchemaVersion = "2.0"
+        ProjectGuid = "{BB1EE0B1-1808-46CB-B786-949D91117FC5}"
+    >
+        <Build>
+            <Settings
+                ApplicationIcon = ""
+                AssemblyKeyContainerName = ""
+                AssemblyName = "DotZLib"
+                AssemblyOriginatorKeyFile = ""
+                DefaultClientScript = "JScript"
+                DefaultHTMLPageLayout = "Grid"
+                DefaultTargetSchema = "IE50"
+                DelaySign = "false"
+                OutputType = "Library"
+                PreBuildEvent = ""
+                PostBuildEvent = ""
+                RootNamespace = "DotZLib"
+                RunPostBuildEvent = "OnBuildSuccess"
+                StartupObject = ""
+            >
+                <Config
+                    Name = "Debug"
+                    AllowUnsafeBlocks = "false"
+                    BaseAddress = "285212672"
+                    CheckForOverflowUnderflow = "false"
+                    ConfigurationOverrideFile = ""
+                    DefineConstants = "DEBUG;TRACE"
+                    DocumentationFile = "docs\DotZLib.xml"
+                    DebugSymbols = "true"
+                    FileAlignment = "4096"
+                    IncrementalBuild = "false"
+                    NoStdLib = "false"
+                    NoWarn = "1591"
+                    Optimize = "false"
+                    OutputPath = "bin\Debug\"
+                    RegisterForComInterop = "false"
+                    RemoveIntegerChecks = "false"
+                    TreatWarningsAsErrors = "false"
+                    WarningLevel = "4"
+                />
+                <Config
+                    Name = "Release"
+                    AllowUnsafeBlocks = "false"
+                    BaseAddress = "285212672"
+                    CheckForOverflowUnderflow = "false"
+                    ConfigurationOverrideFile = ""
+                    DefineConstants = "TRACE"
+                    DocumentationFile = "docs\DotZLib.xml"
+                    DebugSymbols = "false"
+                    FileAlignment = "4096"
+                    IncrementalBuild = "false"
+                    NoStdLib = "false"
+                    NoWarn = ""
+                    Optimize = "true"
+                    OutputPath = "bin\Release\"
+                    RegisterForComInterop = "false"
+                    RemoveIntegerChecks = "false"
+                    TreatWarningsAsErrors = "false"
+                    WarningLevel = "4"
+                />
+            </Settings>
+            <References>
+                <Reference
+                    Name = "System"
+                    AssemblyName = "System"
+                    HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\System.dll"
+                />
+                <Reference
+                    Name = "System.Data"
+                    AssemblyName = "System.Data"
+                    HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\System.Data.dll"
+                />
+                <Reference
+                    Name = "System.XML"
+                    AssemblyName = "System.Xml"
+                    HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\System.XML.dll"
+                />
+                <Reference
+                    Name = "nunit.framework"
+                    AssemblyName = "nunit.framework"
+                    HintPath = "E:\apps\NUnit V2.1\\bin\nunit.framework.dll"
+                    AssemblyFolderKey = "hklm\dn\nunit.framework"
+                />
+            </References>
+        </Build>
+        <Files>
+            <Include>
+                <File
+                    RelPath = "AssemblyInfo.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "ChecksumImpl.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "CircularBuffer.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "CodecBase.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "Deflater.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "DotZLib.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "GZipStream.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "Inflater.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "UnitTests.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+            </Include>
+        </Files>
+    </CSHARP>
+</VisualStudioProject>
+

contrib/dotzlib/DotZLib/GZipStream.cs

@@ -0,0 +1,301 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.IO;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+	/// <summary>
+	/// Implements a compressed <see cref="Stream"/>, in GZip (.gz) format.
+	/// </summary>
+	public class GZipStream : Stream, IDisposable
+	{
+        #region Dll Imports
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)]
+        private static extern IntPtr gzopen(string name, string mode);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzclose(IntPtr gzFile);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzwrite(IntPtr gzFile, int data, int length);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzread(IntPtr gzFile, int data, int length);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzgetc(IntPtr gzFile);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzputc(IntPtr gzFile, int c);
+
+        #endregion
+
+        #region Private data
+        private IntPtr _gzFile;
+        private bool _isDisposed = false;
+        private bool _isWriting;
+        #endregion
+
+        #region Constructors
+        /// <summary>
+        /// Creates a new file as a writeable GZipStream
+        /// </summary>
+        /// <param name="fileName">The name of the compressed file to create</param>
+        /// <param name="level">The compression level to use when adding data</param>
+        /// <exception cref="ZLibException">If an error occurred in the internal zlib function</exception>
+		public GZipStream(string fileName, CompressLevel level)
+		{
+            _isWriting = true;
+            _gzFile = gzopen(fileName, String.Format("wb{0}", (int)level));
+            if (_gzFile == IntPtr.Zero)
+                throw new ZLibException(-1, "Could not open " + fileName);
+		}
+
+        /// <summary>
+        /// Opens an existing file as a readable GZipStream
+        /// </summary>
+        /// <param name="fileName">The name of the file to open</param>
+        /// <exception cref="ZLibException">If an error occurred in the internal zlib function</exception>
+        public GZipStream(string fileName)
+        {
+            _isWriting = false;
+            _gzFile = gzopen(fileName, "rb");
+            if (_gzFile == IntPtr.Zero)
+                throw new ZLibException(-1, "Could not open " + fileName);
+
+        }
+        #endregion
+
+        #region Access properties
+        /// <summary>
+        /// Returns true of this stream can be read from, false otherwise
+        /// </summary>
+        public override bool CanRead
+        {
+            get
+            {
+                return !_isWriting;
+            }
+        }
+
+
+        /// <summary>
+        /// Returns false.
+        /// </summary>
+        public override bool CanSeek
+        {
+            get
+            {
+                return false;
+            }
+        }
+
+        /// <summary>
+        /// Returns true if this tsream is writeable, false otherwise
+        /// </summary>
+        public override bool CanWrite
+        {
+            get
+            {
+                return _isWriting;
+            }
+        }
+        #endregion
+
+        #region Destructor & IDispose stuff
+
+        /// <summary>
+        /// Destroys this instance
+        /// </summary>
+        ~GZipStream()
+        {
+            cleanUp(false);
+        }
+
+        /// <summary>
+        /// Closes the external file handle
+        /// </summary>
+        public void Dispose()
+        {
+            cleanUp(true);
+        }
+
+        // Does the actual closing of the file handle.
+        private void cleanUp(bool isDisposing)
+        {
+            if (!_isDisposed)
+            {
+                gzclose(_gzFile);
+                _isDisposed = true;
+            }
+        }
+        #endregion
+
+        #region Basic reading and writing
+        /// <summary>
+        /// Attempts to read a number of bytes from the stream.
+        /// </summary>
+        /// <param name="buffer">The destination data buffer</param>
+        /// <param name="offset">The index of the first destination byte in <c>buffer</c></param>
+        /// <param name="count">The number of bytes requested</param>
+        /// <returns>The number of bytes read</returns>
+        /// <exception cref="ArgumentNullException">If <c>buffer</c> is null</exception>
+        /// <exception cref="ArgumentOutOfRangeException">If <c>count</c> or <c>offset</c> are negative</exception>
+        /// <exception cref="ArgumentException">If <c>offset</c>  + <c>count</c> is &gt; buffer.Length</exception>
+        /// <exception cref="NotSupportedException">If this stream is not readable.</exception>
+        /// <exception cref="ObjectDisposedException">If this stream has been disposed.</exception>
+        public override int Read(byte[] buffer, int offset, int count)
+        {
+            if (!CanRead) throw new NotSupportedException();
+            if (buffer == null) throw new ArgumentNullException();
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > buffer.Length) throw new ArgumentException();
+            if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+
+            GCHandle h = GCHandle.Alloc(buffer, GCHandleType.Pinned);
+            int result;
+            try
+            {
+                result = gzread(_gzFile, h.AddrOfPinnedObject().ToInt32() + offset, count);
+                if (result < 0)
+                    throw new IOException();
+            }
+            finally
+            {
+                h.Free();
+            }
+            return result;
+        }
+
+        /// <summary>
+        /// Attempts to read a single byte from the stream.
+        /// </summary>
+        /// <returns>The byte that was read, or -1 in case of error or End-Of-File</returns>
+        public override int ReadByte()
+        {
+            if (!CanRead) throw new NotSupportedException();
+            if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+            return gzgetc(_gzFile);
+        }
+
+        /// <summary>
+        /// Writes a number of bytes to the stream
+        /// </summary>
+        /// <param name="buffer"></param>
+        /// <param name="offset"></param>
+        /// <param name="count"></param>
+        /// <exception cref="ArgumentNullException">If <c>buffer</c> is null</exception>
+        /// <exception cref="ArgumentOutOfRangeException">If <c>count</c> or <c>offset</c> are negative</exception>
+        /// <exception cref="ArgumentException">If <c>offset</c>  + <c>count</c> is &gt; buffer.Length</exception>
+        /// <exception cref="NotSupportedException">If this stream is not writeable.</exception>
+        /// <exception cref="ObjectDisposedException">If this stream has been disposed.</exception>
+        public override void Write(byte[] buffer, int offset, int count)
+        {
+            if (!CanWrite) throw new NotSupportedException();
+            if (buffer == null) throw new ArgumentNullException();
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > buffer.Length) throw new ArgumentException();
+            if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+
+            GCHandle h = GCHandle.Alloc(buffer, GCHandleType.Pinned);
+            try
+            {
+                int result = gzwrite(_gzFile, h.AddrOfPinnedObject().ToInt32() + offset, count);
+                if (result < 0)
+                    throw new IOException();
+            }
+            finally
+            {
+                h.Free();
+            }
+        }
+
+        /// <summary>
+        /// Writes a single byte to the stream
+        /// </summary>
+        /// <param name="value">The byte to add to the stream.</param>
+        /// <exception cref="NotSupportedException">If this stream is not writeable.</exception>
+        /// <exception cref="ObjectDisposedException">If this stream has been disposed.</exception>
+        public override void WriteByte(byte value)
+        {
+            if (!CanWrite) throw new NotSupportedException();
+            if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+
+            int result = gzputc(_gzFile, (int)value);
+            if (result < 0)
+                throw new IOException();
+        }
+        #endregion
+
+        #region Position & length stuff
+        /// <summary>
+        /// Not supported.
+        /// </summary>
+        /// <param name="value"></param>
+        /// <exception cref="NotSupportedException">Always thrown</exception>
+        public override void SetLength(long value)
+        {
+            throw new NotSupportedException();
+        }
+
+        /// <summary>
+        ///  Not suppported.
+        /// </summary>
+        /// <param name="offset"></param>
+        /// <param name="origin"></param>
+        /// <returns></returns>
+        /// <exception cref="NotSupportedException">Always thrown</exception>
+        public override long Seek(long offset, SeekOrigin origin)
+        {
+            throw new NotSupportedException();
+        }
+
+        /// <summary>
+        /// Flushes the <c>GZipStream</c>.
+        /// </summary>
+        /// <remarks>In this implementation, this method does nothing. This is because excessive
+        /// flushing may degrade the achievable compression rates.</remarks>
+        public override void Flush()
+        {
+            // left empty on purpose
+        }
+
+        /// <summary>
+        /// Gets/sets the current position in the <c>GZipStream</c>. Not suppported.
+        /// </summary>
+        /// <remarks>In this implementation this property is not supported</remarks>
+        /// <exception cref="NotSupportedException">Always thrown</exception>
+        public override long Position
+        {
+            get
+            {
+                throw new NotSupportedException();
+            }
+            set
+            {
+                throw new NotSupportedException();
+            }
+        }
+
+        /// <summary>
+        /// Gets the size of the stream. Not suppported.
+        /// </summary>
+        /// <remarks>In this implementation this property is not supported</remarks>
+        /// <exception cref="NotSupportedException">Always thrown</exception>
+        public override long Length
+        {
+            get
+            {
+                throw new NotSupportedException();
+            }
+        }
+        #endregion
+    }
+}

contrib/dotzlib/DotZLib/Inflater.cs

@@ -0,0 +1,105 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Diagnostics;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+
+    /// <summary>
+    /// Implements a data decompressor, using the inflate algorithm in the ZLib dll
+    /// </summary>
+    public class Inflater : CodecBase
+	{
+        #region Dll imports
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)]
+        private static extern int inflateInit_(ref ZStream sz, string vs, int size);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int inflate(ref ZStream sz, int flush);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int inflateReset(ref ZStream sz);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int inflateEnd(ref ZStream sz);
+        #endregion
+
+        /// <summary>
+        /// Constructs an new instance of the <c>Inflater</c>
+        /// </summary>
+        public Inflater() : base()
+		{
+            int retval = inflateInit_(ref _ztream, Info.Version, Marshal.SizeOf(_ztream));
+            if (retval != 0)
+                throw new ZLibException(retval, "Could not initialize inflater");
+
+            resetOutput();
+        }
+
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+        /// <param name="count">The number of bytes to add</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        public override void Add(byte[] data, int offset, int count)
+        {
+            if (data == null) throw new ArgumentNullException();
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > data.Length) throw new ArgumentException();
+
+            int total = count;
+            int inputIndex = offset;
+            int err = 0;
+
+            while (err >= 0 && inputIndex < total)
+            {
+                copyInput(data, inputIndex, Math.Min(total - inputIndex, kBufferSize));
+                err = inflate(ref _ztream, (int)FlushTypes.None);
+                if (err == 0)
+                    while (_ztream.avail_out == 0)
+                    {
+                        OnDataAvailable();
+                        err = inflate(ref _ztream, (int)FlushTypes.None);
+                    }
+
+                inputIndex += (int)_ztream.total_in;
+            }
+            setChecksum( _ztream.adler );
+        }
+
+
+        /// <summary>
+        /// Finishes up any pending data that needs to be processed and handled.
+        /// </summary>
+        public override void Finish()
+        {
+            int err;
+            do
+            {
+                err = inflate(ref _ztream, (int)FlushTypes.Finish);
+                OnDataAvailable();
+            }
+            while (err == 0);
+            setChecksum( _ztream.adler );
+            inflateReset(ref _ztream);
+            resetOutput();
+        }
+
+        /// <summary>
+        /// Closes the internal zlib inflate stream
+        /// </summary>
+        protected override void CleanUp() { inflateEnd(ref _ztream); }
+
+
+	}
+}

contrib/dotzlib/DotZLib/UnitTests.cs

@@ -0,0 +1,274 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Collections;
+using System.IO;
+
+// uncomment the define below to include unit tests
+//#define nunit
+#if nunit
+using NUnit.Framework;
+
+// Unit tests for the DotZLib class library
+// ----------------------------------------
+//
+// Use this with NUnit 2 from http://www.nunit.org
+//
+
+namespace DotZLibTests
+{
+    using DotZLib;
+
+    // helper methods
+    internal class Utils
+    {
+        public static bool byteArrEqual( byte[] lhs, byte[] rhs )
+        {
+            if (lhs.Length != rhs.Length)
+                return false;
+            for (int i = lhs.Length-1; i >= 0; --i)
+                if (lhs[i] != rhs[i])
+                    return false;
+            return true;
+        }
+
+    }
+
+
+    [TestFixture]
+    public class CircBufferTests
+    {
+        #region Circular buffer tests
+        [Test]
+        public void SinglePutGet()
+        {
+            CircularBuffer buf = new CircularBuffer(10);
+            Assert.AreEqual( 0, buf.Size );
+            Assert.AreEqual( -1, buf.Get() );
+
+            Assert.IsTrue(buf.Put( 1 ));
+            Assert.AreEqual( 1, buf.Size );
+            Assert.AreEqual( 1, buf.Get() );
+            Assert.AreEqual( 0, buf.Size );
+            Assert.AreEqual( -1, buf.Get() );
+        }
+
+        [Test]
+        public void BlockPutGet()
+        {
+            CircularBuffer buf = new CircularBuffer(10);
+            byte[] arr = {1,2,3,4,5,6,7,8,9,10};
+            Assert.AreEqual( 10, buf.Put(arr,0,10) );
+            Assert.AreEqual( 10, buf.Size );
+            Assert.IsFalse( buf.Put(11) );
+            Assert.AreEqual( 1, buf.Get() );
+            Assert.IsTrue( buf.Put(11) );
+
+            byte[] arr2 = (byte[])arr.Clone();
+            Assert.AreEqual( 9, buf.Get(arr2,1,9) );
+            Assert.IsTrue( Utils.byteArrEqual(arr,arr2) );
+        }
+
+        #endregion
+    }
+
+    [TestFixture]
+    public class ChecksumTests
+    {
+        #region CRC32 Tests
+        [Test]
+        public void CRC32_Null()
+        {
+            CRC32Checksum crc32 = new CRC32Checksum();
+            Assert.AreEqual( 0, crc32.Value );
+
+            crc32 = new CRC32Checksum(1);
+            Assert.AreEqual( 1, crc32.Value );
+
+            crc32 = new CRC32Checksum(556);
+            Assert.AreEqual( 556, crc32.Value );
+        }
+
+        [Test]
+        public void CRC32_Data()
+        {
+            CRC32Checksum crc32 = new CRC32Checksum();
+            byte[] data = { 1,2,3,4,5,6,7 };
+            crc32.Update(data);
+            Assert.AreEqual( 0x70e46888, crc32.Value  );
+
+            crc32 = new CRC32Checksum();
+            crc32.Update("penguin");
+            Assert.AreEqual( 0x0e5c1a120, crc32.Value );
+
+            crc32 = new CRC32Checksum(1);
+            crc32.Update("penguin");
+            Assert.AreEqual(0x43b6aa94, crc32.Value);
+
+        }
+        #endregion
+
+        #region Adler tests
+
+        [Test]
+        public void Adler_Null()
+        {
+            AdlerChecksum adler = new AdlerChecksum();
+            Assert.AreEqual(0, adler.Value);
+
+            adler = new AdlerChecksum(1);
+            Assert.AreEqual( 1, adler.Value );
+
+            adler = new AdlerChecksum(556);
+            Assert.AreEqual( 556, adler.Value );
+        }
+
+        [Test]
+        public void Adler_Data()
+        {
+            AdlerChecksum adler = new AdlerChecksum(1);
+            byte[] data = { 1,2,3,4,5,6,7 };
+            adler.Update(data);
+            Assert.AreEqual( 0x5b001d, adler.Value  );
+
+            adler = new AdlerChecksum();
+            adler.Update("penguin");
+            Assert.AreEqual(0x0bcf02f6, adler.Value );
+
+            adler = new AdlerChecksum(1);
+            adler.Update("penguin");
+            Assert.AreEqual(0x0bd602f7, adler.Value);
+
+        }
+        #endregion
+    }
+
+    [TestFixture]
+    public class InfoTests
+    {
+        #region Info tests
+        [Test]
+        public void Info_Version()
+        {
+            Info info = new Info();
+            Assert.AreEqual("1.2.7.1", Info.Version);
+            Assert.AreEqual(32, info.SizeOfUInt);
+            Assert.AreEqual(32, info.SizeOfULong);
+            Assert.AreEqual(32, info.SizeOfPointer);
+            Assert.AreEqual(32, info.SizeOfOffset);
+        }
+        #endregion
+    }
+
+    [TestFixture]
+    public class DeflateInflateTests
+    {
+        #region Deflate tests
+        [Test]
+        public void Deflate_Init()
+        {
+            using (Deflater def = new Deflater(CompressLevel.Default))
+            {
+            }
+        }
+
+        private ArrayList compressedData = new ArrayList();
+        private uint adler1;
+
+        private ArrayList uncompressedData = new ArrayList();
+        private uint adler2;
+
+        public void CDataAvail(byte[] data, int startIndex, int count)
+        {
+            for (int i = 0; i < count; ++i)
+                compressedData.Add(data[i+startIndex]);
+        }
+
+        [Test]
+        public void Deflate_Compress()
+        {
+            compressedData.Clear();
+
+            byte[] testData = new byte[35000];
+            for (int i = 0; i < testData.Length; ++i)
+                testData[i] = 5;
+
+            using (Deflater def = new Deflater((CompressLevel)5))
+            {
+                def.DataAvailable += new DataAvailableHandler(CDataAvail);
+                def.Add(testData);
+                def.Finish();
+                adler1 = def.Checksum;
+            }
+        }
+        #endregion
+
+        #region Inflate tests
+        [Test]
+        public void Inflate_Init()
+        {
+            using (Inflater inf = new Inflater())
+            {
+            }
+        }
+
+        private void DDataAvail(byte[] data, int startIndex, int count)
+        {
+            for (int i = 0; i < count; ++i)
+                uncompressedData.Add(data[i+startIndex]);
+        }
+
+        [Test]
+        public void Inflate_Expand()
+        {
+            uncompressedData.Clear();
+
+            using (Inflater inf = new Inflater())
+            {
+                inf.DataAvailable += new DataAvailableHandler(DDataAvail);
+                inf.Add((byte[])compressedData.ToArray(typeof(byte)));
+                inf.Finish();
+                adler2 = inf.Checksum;
+            }
+            Assert.AreEqual( adler1, adler2 );
+        }
+        #endregion
+    }
+
+    [TestFixture]
+    public class GZipStreamTests
+    {
+        #region GZipStream test
+        [Test]
+        public void GZipStream_WriteRead()
+        {
+            using (GZipStream gzOut = new GZipStream("gzstream.gz", CompressLevel.Best))
+            {
+                BinaryWriter writer = new BinaryWriter(gzOut);
+                writer.Write("hi there");
+                writer.Write(Math.PI);
+                writer.Write(42);
+            }
+
+            using (GZipStream gzIn = new GZipStream("gzstream.gz"))
+            {
+                BinaryReader reader = new BinaryReader(gzIn);
+                string s = reader.ReadString();
+                Assert.AreEqual("hi there",s);
+                double d = reader.ReadDouble();
+                Assert.AreEqual(Math.PI, d);
+                int i = reader.ReadInt32();
+                Assert.AreEqual(42,i);
+            }
+
+        }
+        #endregion
+	}
+}
+
+#endif

contrib/dotzlib/LICENSE_1_0.txt

@@ -0,0 +1,23 @@
+Boost Software License - Version 1.0 - August 17th, 2003
+
+Permission is hereby granted, free of charge, to any person or organization
+obtaining a copy of the software and accompanying documentation covered by
+this license (the "Software") to use, reproduce, display, distribute,
+execute, and transmit the Software, and to prepare derivative works of the
+Software, and to permit third-parties to whom the Software is furnished to
+do so, all subject to the following:
+
+The copyright notices in the Software and this entire statement, including
+the above license grant, this restriction and the following disclaimer,
+must be included in all copies of the Software, in whole or in part, and
+all derivative works of the Software, unless such copies or derivative
+works are solely in the form of machine-executable object code generated by
+a source language processor.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT
+SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE
+FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE,
+ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+DEALINGS IN THE SOFTWARE.

contrib/dotzlib/readme.txt

@@ -0,0 +1,58 @@
+This directory contains a .Net wrapper class library for the ZLib1.dll
+
+The wrapper includes support for inflating/deflating memory buffers,
+.Net streaming wrappers for the gz streams part of zlib, and wrappers
+for the checksum parts of zlib. See DotZLib/UnitTests.cs for examples.
+
+Directory structure:
+--------------------
+
+LICENSE_1_0.txt       - License file.
+readme.txt            - This file.
+DotZLib.chm           - Class library documentation
+DotZLib.build         - NAnt build file
+DotZLib.sln           - Microsoft Visual Studio 2003 solution file
+
+DotZLib\*.cs          - Source files for the class library
+
+Unit tests:
+-----------
+The file DotZLib/UnitTests.cs contains unit tests for use with NUnit 2.1 or higher.
+To include unit tests in the build, define nunit before building.
+
+
+Build instructions:
+-------------------
+
+1. Using Visual Studio.Net 2003:
+   Open DotZLib.sln in VS.Net and build from there. Output file (DotZLib.dll)
+   will be found ./DotZLib/bin/release or ./DotZLib/bin/debug, depending on
+   you are building the release or debug version of the library. Check
+   DotZLib/UnitTests.cs for instructions on how to include unit tests in the
+   build.
+
+2. Using NAnt:
+   Open a command prompt with access to the build environment and run nant
+   in the same directory as the DotZLib.build file.
+   You can define 2 properties on the nant command-line to control the build:
+   debug={true|false} to toggle between release/debug builds (default=true).
+   nunit={true|false} to include or esclude unit tests (default=true).
+   Also the target clean will remove binaries.
+   Output file (DotZLib.dll) will be found in either ./DotZLib/bin/release
+   or ./DotZLib/bin/debug, depending on whether you are building the release
+   or debug version of the library.
+
+   Examples:
+     nant -D:debug=false -D:nunit=false
+       will build a release mode version of the library without unit tests.
+     nant
+       will build a debug version of the library with unit tests
+     nant clean
+       will remove all previously built files.
+
+
+---------------------------------
+Copyright (c) Henrik Ravn 2004
+
+Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+(See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)

contrib/gcc_gvmat64/gvmat64.S

@@ -0,0 +1,574 @@
+/*
+;uInt longest_match_x64(
+;    deflate_state *s,
+;    IPos cur_match);                             // current match 
+
+; gvmat64.S -- Asm portion of the optimized longest_match for 32 bits x86_64
+;  (AMD64 on Athlon 64, Opteron, Phenom
+;     and Intel EM64T on Pentium 4 with EM64T, Pentium D, Core 2 Duo, Core I5/I7)
+; this file is translation from gvmat64.asm to GCC 4.x (for Linux, Mac XCode)
+; Copyright (C) 1995-2010 Jean-loup Gailly, Brian Raiter and Gilles Vollant.
+;
+; File written by Gilles Vollant, by converting to assembly the longest_match
+;  from Jean-loup Gailly in deflate.c of zLib and infoZip zip.
+;  and by taking inspiration on asm686 with masm, optimised assembly code
+;        from Brian Raiter, written 1998
+;
+;  This software is provided 'as-is', without any express or implied
+;  warranty.  In no event will the authors be held liable for any damages
+;  arising from the use of this software.
+;
+;  Permission is granted to anyone to use this software for any purpose,
+;  including commercial applications, and to alter it and redistribute it
+;  freely, subject to the following restrictions:
+;
+;  1. The origin of this software must not be misrepresented; you must not
+;     claim that you wrote the original software. If you use this software
+;     in a product, an acknowledgment in the product documentation would be
+;     appreciated but is not required.
+;  2. Altered source versions must be plainly marked as such, and must not be
+;     misrepresented as being the original software
+;  3. This notice may not be removed or altered from any source distribution.
+;
+;         http://www.zlib.net
+;         http://www.winimage.com/zLibDll
+;         http://www.muppetlabs.com/~breadbox/software/assembly.html
+;
+; to compile this file for zLib, I use option:
+;   gcc -c -arch x86_64 gvmat64.S
+
+
+;uInt longest_match(s, cur_match)
+;    deflate_state *s;
+;    IPos cur_match;                             // current match /
+;
+; with XCode for Mac, I had strange error with some jump on intel syntax
+; this is why BEFORE_JMP and AFTER_JMP are used
+ */
+
+
+#define BEFORE_JMP .att_syntax
+#define AFTER_JMP .intel_syntax noprefix
+
+#ifndef NO_UNDERLINE
+#	define	match_init	_match_init
+#	define	longest_match	_longest_match
+#endif
+
+.intel_syntax noprefix
+
+.globl	match_init, longest_match
+.text
+longest_match:
+
+
+
+#define LocalVarsSize 96
+/*
+; register used : rax,rbx,rcx,rdx,rsi,rdi,r8,r9,r10,r11,r12
+; free register :  r14,r15
+; register can be saved : rsp
+*/
+
+#define chainlenwmask     (rsp + 8 - LocalVarsSize)
+#define nicematch         (rsp + 16 - LocalVarsSize)
+
+#define save_rdi        (rsp + 24 - LocalVarsSize)
+#define save_rsi        (rsp + 32 - LocalVarsSize)
+#define save_rbx        (rsp + 40 - LocalVarsSize)
+#define save_rbp        (rsp + 48 - LocalVarsSize)
+#define save_r12        (rsp + 56 - LocalVarsSize)
+#define save_r13        (rsp + 64 - LocalVarsSize)
+#define save_r14        (rsp + 72 - LocalVarsSize)
+#define save_r15        (rsp + 80 - LocalVarsSize)
+
+
+/*
+;  all the +4 offsets are due to the addition of pending_buf_size (in zlib
+;  in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, remove the +4).
+;  Note : these value are good with a 8 bytes boundary pack structure
+*/
+
+#define    MAX_MATCH              258
+#define    MIN_MATCH              3
+#define    MIN_LOOKAHEAD          (MAX_MATCH+MIN_MATCH+1)
+
+/*
+;;; Offsets for fields in the deflate_state structure. These numbers
+;;; are calculated from the definition of deflate_state, with the
+;;; assumption that the compiler will dword-align the fields. (Thus,
+;;; changing the definition of deflate_state could easily cause this
+;;; program to crash horribly, without so much as a warning at
+;;; compile time. Sigh.)
+
+;  all the +zlib1222add offsets are due to the addition of fields
+;  in zlib in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+;  (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+;  if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
+*/
+
+
+
+/* you can check the structure offset by running
+
+#include <stdlib.h>
+#include <stdio.h>
+#include "deflate.h"
+
+void print_depl()
+{
+deflate_state ds;
+deflate_state *s=&ds;
+printf("size pointer=%u\n",(int)sizeof(void*));
+
+printf("#define dsWSize         %u\n",(int)(((char*)&(s->w_size))-((char*)s)));
+printf("#define dsWMask         %u\n",(int)(((char*)&(s->w_mask))-((char*)s)));
+printf("#define dsWindow        %u\n",(int)(((char*)&(s->window))-((char*)s)));
+printf("#define dsPrev          %u\n",(int)(((char*)&(s->prev))-((char*)s)));
+printf("#define dsMatchLen      %u\n",(int)(((char*)&(s->match_length))-((char*)s)));
+printf("#define dsPrevMatch     %u\n",(int)(((char*)&(s->prev_match))-((char*)s)));
+printf("#define dsStrStart      %u\n",(int)(((char*)&(s->strstart))-((char*)s)));
+printf("#define dsMatchStart    %u\n",(int)(((char*)&(s->match_start))-((char*)s)));
+printf("#define dsLookahead     %u\n",(int)(((char*)&(s->lookahead))-((char*)s)));
+printf("#define dsPrevLen       %u\n",(int)(((char*)&(s->prev_length))-((char*)s)));
+printf("#define dsMaxChainLen   %u\n",(int)(((char*)&(s->max_chain_length))-((char*)s)));
+printf("#define dsGoodMatch     %u\n",(int)(((char*)&(s->good_match))-((char*)s)));
+printf("#define dsNiceMatch     %u\n",(int)(((char*)&(s->nice_match))-((char*)s)));
+}
+*/
+
+#define dsWSize          68
+#define dsWMask          76
+#define dsWindow         80
+#define dsPrev           96
+#define dsMatchLen       144
+#define dsPrevMatch      148
+#define dsStrStart       156
+#define dsMatchStart     160
+#define dsLookahead      164
+#define dsPrevLen        168
+#define dsMaxChainLen    172
+#define dsGoodMatch      188
+#define dsNiceMatch      192
+
+#define window_size      [ rcx + dsWSize]
+#define WMask            [ rcx + dsWMask]
+#define window_ad        [ rcx + dsWindow]
+#define prev_ad          [ rcx + dsPrev]
+#define strstart         [ rcx + dsStrStart]
+#define match_start      [ rcx + dsMatchStart]
+#define Lookahead        [ rcx + dsLookahead] //; 0ffffffffh on infozip
+#define prev_length      [ rcx + dsPrevLen]
+#define max_chain_length [ rcx + dsMaxChainLen]
+#define good_match       [ rcx + dsGoodMatch]
+#define nice_match       [ rcx + dsNiceMatch]
+
+/*
+; windows:
+; parameter 1 in rcx(deflate state s), param 2 in rdx (cur match)
+
+; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and
+; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp
+;
+; All registers must be preserved across the call, except for
+;   rax, rcx, rdx, r8, r9, r10, and r11, which are scratch.
+
+;
+; gcc on macosx-linux:
+; see http://www.x86-64.org/documentation/abi-0.99.pdf
+; param 1 in rdi, param 2 in rsi
+; rbx, rsp, rbp, r12 to r15 must be preserved
+
+;;; Save registers that the compiler may be using, and adjust esp to
+;;; make room for our stack frame.
+
+
+;;; Retrieve the function arguments. r8d will hold cur_match
+;;; throughout the entire function. edx will hold the pointer to the
+;;; deflate_state structure during the function's setup (before
+;;; entering the main loop.
+
+; ms: parameter 1 in rcx (deflate_state* s), param 2 in edx -> r8 (cur match)
+; mac: param 1 in rdi, param 2 rsi
+; this clear high 32 bits of r8, which can be garbage in both r8 and rdx
+*/
+        mov [save_rbx],rbx
+        mov [save_rbp],rbp
+
+
+        mov rcx,rdi
+
+        mov r8d,esi
+
+
+        mov [save_r12],r12
+        mov [save_r13],r13
+        mov [save_r14],r14
+        mov [save_r15],r15
+
+
+//;;; uInt wmask = s->w_mask;
+//;;; unsigned chain_length = s->max_chain_length;
+//;;; if (s->prev_length >= s->good_match) {
+//;;;     chain_length >>= 2;
+//;;; }
+
+
+        mov edi, prev_length
+        mov esi, good_match
+        mov eax, WMask
+        mov ebx, max_chain_length
+        cmp edi, esi
+        jl  LastMatchGood
+        shr ebx, 2
+LastMatchGood:
+
+//;;; chainlen is decremented once beforehand so that the function can
+//;;; use the sign flag instead of the zero flag for the exit test.
+//;;; It is then shifted into the high word, to make room for the wmask
+//;;; value, which it will always accompany.
+
+        dec ebx
+        shl ebx, 16
+        or  ebx, eax
+
+//;;; on zlib only
+//;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+
+
+        mov eax, nice_match
+        mov [chainlenwmask], ebx
+        mov r10d, Lookahead
+        cmp r10d, eax
+        cmovnl r10d, eax
+        mov [nicematch],r10d
+
+
+
+//;;; register Bytef *scan = s->window + s->strstart;
+        mov r10, window_ad
+        mov ebp, strstart
+        lea r13, [r10 + rbp]
+
+//;;; Determine how many bytes the scan ptr is off from being
+//;;; dword-aligned.
+
+         mov r9,r13
+         neg r13
+         and r13,3
+
+//;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+//;;;     s->strstart - (IPos)MAX_DIST(s) : NIL;
+
+
+        mov eax, window_size
+        sub eax, MIN_LOOKAHEAD
+
+
+        xor edi,edi
+        sub ebp, eax
+
+        mov r11d, prev_length
+
+        cmovng ebp,edi
+
+//;;; int best_len = s->prev_length;
+
+
+//;;; Store the sum of s->window + best_len in esi locally, and in esi.
+
+       lea  rsi,[r10+r11]
+
+//;;; register ush scan_start = *(ushf*)scan;
+//;;; register ush scan_end   = *(ushf*)(scan+best_len-1);
+//;;; Posf *prev = s->prev;
+
+        movzx r12d,word ptr [r9]
+        movzx ebx, word ptr [r9 + r11 - 1]
+
+        mov rdi, prev_ad
+
+//;;; Jump into the main loop.
+
+        mov edx, [chainlenwmask]
+
+        cmp bx,word ptr [rsi + r8 - 1]
+        jz  LookupLoopIsZero
+				
+						
+						
+LookupLoop1:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+		
+		
+		
+        sub edx, 0x00010000
+		BEFORE_JMP
+        js  LeaveNow
+		AFTER_JMP
+
+LoopEntry1:
+        cmp bx,word ptr [rsi + r8 - 1]
+		BEFORE_JMP
+        jz  LookupLoopIsZero
+		AFTER_JMP
+
+LookupLoop2:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+		BEFORE_JMP
+        jbe LeaveNow
+		AFTER_JMP
+        sub edx, 0x00010000
+		BEFORE_JMP
+        js  LeaveNow
+		AFTER_JMP
+
+LoopEntry2:
+        cmp bx,word ptr [rsi + r8 - 1]
+		BEFORE_JMP
+        jz  LookupLoopIsZero
+		AFTER_JMP
+
+LookupLoop4:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+		BEFORE_JMP
+        jbe LeaveNow
+		AFTER_JMP
+        sub edx, 0x00010000
+		BEFORE_JMP
+        js  LeaveNow
+		AFTER_JMP
+
+LoopEntry4:
+
+        cmp bx,word ptr [rsi + r8 - 1]
+		BEFORE_JMP
+        jnz LookupLoop1
+        jmp LookupLoopIsZero
+		AFTER_JMP
+/*
+;;; do {
+;;;     match = s->window + cur_match;
+;;;     if (*(ushf*)(match+best_len-1) != scan_end ||
+;;;         *(ushf*)match != scan_start) continue;
+;;;     [...]
+;;; } while ((cur_match = prev[cur_match & wmask]) > limit
+;;;          && --chain_length != 0);
+;;;
+;;; Here is the inner loop of the function. The function will spend the
+;;; majority of its time in this loop, and majority of that time will
+;;; be spent in the first ten instructions.
+;;;
+;;; Within this loop:
+;;; ebx = scanend
+;;; r8d = curmatch
+;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
+;;; esi = windowbestlen - i.e., (window + bestlen)
+;;; edi = prev
+;;; ebp = limit
+*/
+.balign 16
+LookupLoop:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+		BEFORE_JMP
+        jbe LeaveNow
+		AFTER_JMP
+        sub edx, 0x00010000
+		BEFORE_JMP
+        js  LeaveNow
+		AFTER_JMP
+
+LoopEntry:
+
+        cmp bx,word ptr [rsi + r8 - 1]
+		BEFORE_JMP
+        jnz LookupLoop1
+		AFTER_JMP
+LookupLoopIsZero:
+        cmp     r12w, word ptr [r10 + r8]
+		BEFORE_JMP
+        jnz LookupLoop1
+		AFTER_JMP
+
+
+//;;; Store the current value of chainlen.
+        mov [chainlenwmask], edx
+/*
+;;; Point edi to the string under scrutiny, and esi to the string we
+;;; are hoping to match it up with. In actuality, esi and edi are
+;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is
+;;; initialized to -(MAX_MATCH_8 - scanalign).
+*/
+        lea rsi,[r8+r10]
+        mov rdx, 0xfffffffffffffef8 //; -(MAX_MATCH_8)
+        lea rsi, [rsi + r13 + 0x0108] //;MAX_MATCH_8]
+        lea rdi, [r9 + r13 + 0x0108] //;MAX_MATCH_8]
+
+        prefetcht1 [rsi+rdx]
+        prefetcht1 [rdi+rdx]
+
+/*
+;;; Test the strings for equality, 8 bytes at a time. At the end,
+;;; adjust rdx so that it is offset to the exact byte that mismatched.
+;;;
+;;; We already know at this point that the first three bytes of the
+;;; strings match each other, and they can be safely passed over before
+;;; starting the compare loop. So what this code does is skip over 0-3
+;;; bytes, as much as necessary in order to dword-align the edi
+;;; pointer. (rsi will still be misaligned three times out of four.)
+;;;
+;;; It should be confessed that this loop usually does not represent
+;;; much of the total running time. Replacing it with a more
+;;; straightforward "rep cmpsb" would not drastically degrade
+;;; performance.
+*/
+
+LoopCmps:
+        mov rax, [rsi + rdx]
+        xor rax, [rdi + rdx]
+        jnz LeaveLoopCmps
+
+        mov rax, [rsi + rdx + 8]
+        xor rax, [rdi + rdx + 8]
+        jnz LeaveLoopCmps8
+
+
+        mov rax, [rsi + rdx + 8+8]
+        xor rax, [rdi + rdx + 8+8]
+        jnz LeaveLoopCmps16
+
+        add rdx,8+8+8
+
+		BEFORE_JMP
+        jnz  LoopCmps
+        jmp  LenMaximum
+		AFTER_JMP
+		
+LeaveLoopCmps16: add rdx,8
+LeaveLoopCmps8: add rdx,8
+LeaveLoopCmps:
+
+        test    eax, 0x0000FFFF
+        jnz LenLower
+
+        test eax,0xffffffff
+
+        jnz LenLower32
+
+        add rdx,4
+        shr rax,32
+        or ax,ax
+		BEFORE_JMP
+        jnz LenLower
+		AFTER_JMP
+
+LenLower32:
+        shr eax,16
+        add rdx,2
+		
+LenLower:		
+        sub al, 1
+        adc rdx, 0
+//;;; Calculate the length of the match. If it is longer than MAX_MATCH,
+//;;; then automatically accept it as the best possible match and leave.
+
+        lea rax, [rdi + rdx]
+        sub rax, r9
+        cmp eax, MAX_MATCH
+		BEFORE_JMP
+        jge LenMaximum
+		AFTER_JMP
+/*
+;;; If the length of the match is not longer than the best match we
+;;; have so far, then forget it and return to the lookup loop.
+;///////////////////////////////////
+*/
+        cmp eax, r11d
+        jg  LongerMatch
+
+        lea rsi,[r10+r11]
+
+        mov rdi, prev_ad
+        mov edx, [chainlenwmask]
+		BEFORE_JMP
+        jmp LookupLoop
+		AFTER_JMP
+/*
+;;;         s->match_start = cur_match;
+;;;         best_len = len;
+;;;         if (len >= nice_match) break;
+;;;         scan_end = *(ushf*)(scan+best_len-1);
+*/
+LongerMatch:
+        mov r11d, eax
+        mov match_start, r8d
+        cmp eax, [nicematch]
+		BEFORE_JMP
+        jge LeaveNow
+		AFTER_JMP
+
+        lea rsi,[r10+rax]
+
+        movzx   ebx, word ptr [r9 + rax - 1]
+        mov rdi, prev_ad
+        mov edx, [chainlenwmask]
+		BEFORE_JMP
+        jmp LookupLoop
+		AFTER_JMP
+
+//;;; Accept the current string, with the maximum possible length.
+
+LenMaximum:
+        mov r11d,MAX_MATCH
+        mov match_start, r8d
+
+//;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+//;;; return s->lookahead;
+
+LeaveNow:
+        mov eax, Lookahead
+        cmp r11d, eax
+        cmovng eax, r11d
+
+
+
+//;;; Restore the stack and return from whence we came.
+
+
+//        mov rsi,[save_rsi]
+//        mov rdi,[save_rdi]
+        mov rbx,[save_rbx]
+        mov rbp,[save_rbp]
+        mov r12,[save_r12]
+        mov r13,[save_r13]
+        mov r14,[save_r14]
+        mov r15,[save_r15]
+
+
+        ret 0
+//; please don't remove this string !
+//; Your can freely use gvmat64 in any free or commercial app
+//; but it is far better don't remove the string in the binary!
+ //   db     0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998, converted to amd 64 by Gilles Vollant 2005",0dh,0ah,0
+
+
+match_init:
+  ret 0
+
+

contrib/infback9/README

@@ -0,0 +1 @@
+See infback9.h for what this is and how to use it.

contrib/infback9/infback9.c

@@ -0,0 +1,615 @@
+/* infback9.c -- inflate deflate64 data using a call-back interface
+ * Copyright (C) 1995-2008 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "infback9.h"
+#include "inftree9.h"
+#include "inflate9.h"
+
+#define WSIZE 65536UL
+
+/*
+   strm provides memory allocation functions in zalloc and zfree, or
+   Z_NULL to use the library memory allocation functions.
+
+   window is a user-supplied window and output buffer that is 64K bytes.
+ */
+int ZEXPORT inflateBack9Init_(strm, window, version, stream_size)
+z_stream FAR *strm;
+unsigned char FAR *window;
+const char *version;
+int stream_size;
+{
+    struct inflate_state FAR *state;
+
+    if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+        stream_size != (int)(sizeof(z_stream)))
+        return Z_VERSION_ERROR;
+    if (strm == Z_NULL || window == Z_NULL)
+        return Z_STREAM_ERROR;
+    strm->msg = Z_NULL;                 /* in case we return an error */
+    if (strm->zalloc == (alloc_func)0) {
+        strm->zalloc = zcalloc;
+        strm->opaque = (voidpf)0;
+    }
+    if (strm->zfree == (free_func)0) strm->zfree = zcfree;
+    state = (struct inflate_state FAR *)ZALLOC(strm, 1,
+                                               sizeof(struct inflate_state));
+    if (state == Z_NULL) return Z_MEM_ERROR;
+    Tracev((stderr, "inflate: allocated\n"));
+    strm->state = (voidpf)state;
+    state->window = window;
+    return Z_OK;
+}
+
+/*
+   Build and output length and distance decoding tables for fixed code
+   decoding.
+ */
+#ifdef MAKEFIXED
+#include <stdio.h>
+
+void makefixed9(void)
+{
+    unsigned sym, bits, low, size;
+    code *next, *lenfix, *distfix;
+    struct inflate_state state;
+    code fixed[544];
+
+    /* literal/length table */
+    sym = 0;
+    while (sym < 144) state.lens[sym++] = 8;
+    while (sym < 256) state.lens[sym++] = 9;
+    while (sym < 280) state.lens[sym++] = 7;
+    while (sym < 288) state.lens[sym++] = 8;
+    next = fixed;
+    lenfix = next;
+    bits = 9;
+    inflate_table9(LENS, state.lens, 288, &(next), &(bits), state.work);
+
+    /* distance table */
+    sym = 0;
+    while (sym < 32) state.lens[sym++] = 5;
+    distfix = next;
+    bits = 5;
+    inflate_table9(DISTS, state.lens, 32, &(next), &(bits), state.work);
+
+    /* write tables */
+    puts("    /* inffix9.h -- table for decoding deflate64 fixed codes");
+    puts("     * Generated automatically by makefixed9().");
+    puts("     */");
+    puts("");
+    puts("    /* WARNING: this file should *not* be used by applications.");
+    puts("       It is part of the implementation of this library and is");
+    puts("       subject to change. Applications should only use zlib.h.");
+    puts("     */");
+    puts("");
+    size = 1U << 9;
+    printf("    static const code lenfix[%u] = {", size);
+    low = 0;
+    for (;;) {
+        if ((low % 6) == 0) printf("\n        ");
+        printf("{%u,%u,%d}", lenfix[low].op, lenfix[low].bits,
+               lenfix[low].val);
+        if (++low == size) break;
+        putchar(',');
+    }
+    puts("\n    };");
+    size = 1U << 5;
+    printf("\n    static const code distfix[%u] = {", size);
+    low = 0;
+    for (;;) {
+        if ((low % 5) == 0) printf("\n        ");
+        printf("{%u,%u,%d}", distfix[low].op, distfix[low].bits,
+               distfix[low].val);
+        if (++low == size) break;
+        putchar(',');
+    }
+    puts("\n    };");
+}
+#endif /* MAKEFIXED */
+
+/* Macros for inflateBack(): */
+
+/* Clear the input bit accumulator */
+#define INITBITS() \
+    do { \
+        hold = 0; \
+        bits = 0; \
+    } while (0)
+
+/* Assure that some input is available.  If input is requested, but denied,
+   then return a Z_BUF_ERROR from inflateBack(). */
+#define PULL() \
+    do { \
+        if (have == 0) { \
+            have = in(in_desc, &next); \
+            if (have == 0) { \
+                next = Z_NULL; \
+                ret = Z_BUF_ERROR; \
+                goto inf_leave; \
+            } \
+        } \
+    } while (0)
+
+/* Get a byte of input into the bit accumulator, or return from inflateBack()
+   with an error if there is no input available. */
+#define PULLBYTE() \
+    do { \
+        PULL(); \
+        have--; \
+        hold += (unsigned long)(*next++) << bits; \
+        bits += 8; \
+    } while (0)
+
+/* Assure that there are at least n bits in the bit accumulator.  If there is
+   not enough available input to do that, then return from inflateBack() with
+   an error. */
+#define NEEDBITS(n) \
+    do { \
+        while (bits < (unsigned)(n)) \
+            PULLBYTE(); \
+    } while (0)
+
+/* Return the low n bits of the bit accumulator (n <= 16) */
+#define BITS(n) \
+    ((unsigned)hold & ((1U << (n)) - 1))
+
+/* Remove n bits from the bit accumulator */
+#define DROPBITS(n) \
+    do { \
+        hold >>= (n); \
+        bits -= (unsigned)(n); \
+    } while (0)
+
+/* Remove zero to seven bits as needed to go to a byte boundary */
+#define BYTEBITS() \
+    do { \
+        hold >>= bits & 7; \
+        bits -= bits & 7; \
+    } while (0)
+
+/* Assure that some output space is available, by writing out the window
+   if it's full.  If the write fails, return from inflateBack() with a
+   Z_BUF_ERROR. */
+#define ROOM() \
+    do { \
+        if (left == 0) { \
+            put = window; \
+            left = WSIZE; \
+            wrap = 1; \
+            if (out(out_desc, put, (unsigned)left)) { \
+                ret = Z_BUF_ERROR; \
+                goto inf_leave; \
+            } \
+        } \
+    } while (0)
+
+/*
+   strm provides the memory allocation functions and window buffer on input,
+   and provides information on the unused input on return.  For Z_DATA_ERROR
+   returns, strm will also provide an error message.
+
+   in() and out() are the call-back input and output functions.  When
+   inflateBack() needs more input, it calls in().  When inflateBack() has
+   filled the window with output, or when it completes with data in the
+   window, it calls out() to write out the data.  The application must not
+   change the provided input until in() is called again or inflateBack()
+   returns.  The application must not change the window/output buffer until
+   inflateBack() returns.
+
+   in() and out() are called with a descriptor parameter provided in the
+   inflateBack() call.  This parameter can be a structure that provides the
+   information required to do the read or write, as well as accumulated
+   information on the input and output such as totals and check values.
+
+   in() should return zero on failure.  out() should return non-zero on
+   failure.  If either in() or out() fails, than inflateBack() returns a
+   Z_BUF_ERROR.  strm->next_in can be checked for Z_NULL to see whether it
+   was in() or out() that caused in the error.  Otherwise,  inflateBack()
+   returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format
+   error, or Z_MEM_ERROR if it could not allocate memory for the state.
+   inflateBack() can also return Z_STREAM_ERROR if the input parameters
+   are not correct, i.e. strm is Z_NULL or the state was not initialized.
+ */
+int ZEXPORT inflateBack9(strm, in, in_desc, out, out_desc)
+z_stream FAR *strm;
+in_func in;
+void FAR *in_desc;
+out_func out;
+void FAR *out_desc;
+{
+    struct inflate_state FAR *state;
+    z_const unsigned char FAR *next;    /* next input */
+    unsigned char FAR *put;     /* next output */
+    unsigned have;              /* available input */
+    unsigned long left;         /* available output */
+    inflate_mode mode;          /* current inflate mode */
+    int lastblock;              /* true if processing last block */
+    int wrap;                   /* true if the window has wrapped */
+    unsigned char FAR *window;  /* allocated sliding window, if needed */
+    unsigned long hold;         /* bit buffer */
+    unsigned bits;              /* bits in bit buffer */
+    unsigned extra;             /* extra bits needed */
+    unsigned long length;       /* literal or length of data to copy */
+    unsigned long offset;       /* distance back to copy string from */
+    unsigned long copy;         /* number of stored or match bytes to copy */
+    unsigned char FAR *from;    /* where to copy match bytes from */
+    code const FAR *lencode;    /* starting table for length/literal codes */
+    code const FAR *distcode;   /* starting table for distance codes */
+    unsigned lenbits;           /* index bits for lencode */
+    unsigned distbits;          /* index bits for distcode */
+    code here;                  /* current decoding table entry */
+    code last;                  /* parent table entry */
+    unsigned len;               /* length to copy for repeats, bits to drop */
+    int ret;                    /* return code */
+    static const unsigned short order[19] = /* permutation of code lengths */
+        {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+#include "inffix9.h"
+
+    /* Check that the strm exists and that the state was initialized */
+    if (strm == Z_NULL || strm->state == Z_NULL)
+        return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+
+    /* Reset the state */
+    strm->msg = Z_NULL;
+    mode = TYPE;
+    lastblock = 0;
+    wrap = 0;
+    window = state->window;
+    next = strm->next_in;
+    have = next != Z_NULL ? strm->avail_in : 0;
+    hold = 0;
+    bits = 0;
+    put = window;
+    left = WSIZE;
+    lencode = Z_NULL;
+    distcode = Z_NULL;
+
+    /* Inflate until end of block marked as last */
+    for (;;)
+        switch (mode) {
+        case TYPE:
+            /* determine and dispatch block type */
+            if (lastblock) {
+                BYTEBITS();
+                mode = DONE;
+                break;
+            }
+            NEEDBITS(3);
+            lastblock = BITS(1);
+            DROPBITS(1);
+            switch (BITS(2)) {
+            case 0:                             /* stored block */
+                Tracev((stderr, "inflate:     stored block%s\n",
+                        lastblock ? " (last)" : ""));
+                mode = STORED;
+                break;
+            case 1:                             /* fixed block */
+                lencode = lenfix;
+                lenbits = 9;
+                distcode = distfix;
+                distbits = 5;
+                Tracev((stderr, "inflate:     fixed codes block%s\n",
+                        lastblock ? " (last)" : ""));
+                mode = LEN;                     /* decode codes */
+                break;
+            case 2:                             /* dynamic block */
+                Tracev((stderr, "inflate:     dynamic codes block%s\n",
+                        lastblock ? " (last)" : ""));
+                mode = TABLE;
+                break;
+            case 3:
+                strm->msg = (char *)"invalid block type";
+                mode = BAD;
+            }
+            DROPBITS(2);
+            break;
+
+        case STORED:
+            /* get and verify stored block length */
+            BYTEBITS();                         /* go to byte boundary */
+            NEEDBITS(32);
+            if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
+                strm->msg = (char *)"invalid stored block lengths";
+                mode = BAD;
+                break;
+            }
+            length = (unsigned)hold & 0xffff;
+            Tracev((stderr, "inflate:       stored length %lu\n",
+                    length));
+            INITBITS();
+
+            /* copy stored block from input to output */
+            while (length != 0) {
+                copy = length;
+                PULL();
+                ROOM();
+                if (copy > have) copy = have;
+                if (copy > left) copy = left;
+                zmemcpy(put, next, copy);
+                have -= copy;
+                next += copy;
+                left -= copy;
+                put += copy;
+                length -= copy;
+            }
+            Tracev((stderr, "inflate:       stored end\n"));
+            mode = TYPE;
+            break;
+
+        case TABLE:
+            /* get dynamic table entries descriptor */
+            NEEDBITS(14);
+            state->nlen = BITS(5) + 257;
+            DROPBITS(5);
+            state->ndist = BITS(5) + 1;
+            DROPBITS(5);
+            state->ncode = BITS(4) + 4;
+            DROPBITS(4);
+            if (state->nlen > 286) {
+                strm->msg = (char *)"too many length symbols";
+                mode = BAD;
+                break;
+            }
+            Tracev((stderr, "inflate:       table sizes ok\n"));
+
+            /* get code length code lengths (not a typo) */
+            state->have = 0;
+            while (state->have < state->ncode) {
+                NEEDBITS(3);
+                state->lens[order[state->have++]] = (unsigned short)BITS(3);
+                DROPBITS(3);
+            }
+            while (state->have < 19)
+                state->lens[order[state->have++]] = 0;
+            state->next = state->codes;
+            lencode = (code const FAR *)(state->next);
+            lenbits = 7;
+            ret = inflate_table9(CODES, state->lens, 19, &(state->next),
+                                &(lenbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid code lengths set";
+                mode = BAD;
+                break;
+            }
+            Tracev((stderr, "inflate:       code lengths ok\n"));
+
+            /* get length and distance code code lengths */
+            state->have = 0;
+            while (state->have < state->nlen + state->ndist) {
+                for (;;) {
+                    here = lencode[BITS(lenbits)];
+                    if ((unsigned)(here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                if (here.val < 16) {
+                    NEEDBITS(here.bits);
+                    DROPBITS(here.bits);
+                    state->lens[state->have++] = here.val;
+                }
+                else {
+                    if (here.val == 16) {
+                        NEEDBITS(here.bits + 2);
+                        DROPBITS(here.bits);
+                        if (state->have == 0) {
+                            strm->msg = (char *)"invalid bit length repeat";
+                            mode = BAD;
+                            break;
+                        }
+                        len = (unsigned)(state->lens[state->have - 1]);
+                        copy = 3 + BITS(2);
+                        DROPBITS(2);
+                    }
+                    else if (here.val == 17) {
+                        NEEDBITS(here.bits + 3);
+                        DROPBITS(here.bits);
+                        len = 0;
+                        copy = 3 + BITS(3);
+                        DROPBITS(3);
+                    }
+                    else {
+                        NEEDBITS(here.bits + 7);
+                        DROPBITS(here.bits);
+                        len = 0;
+                        copy = 11 + BITS(7);
+                        DROPBITS(7);
+                    }
+                    if (state->have + copy > state->nlen + state->ndist) {
+                        strm->msg = (char *)"invalid bit length repeat";
+                        mode = BAD;
+                        break;
+                    }
+                    while (copy--)
+                        state->lens[state->have++] = (unsigned short)len;
+                }
+            }
+
+            /* handle error breaks in while */
+            if (mode == BAD) break;
+
+            /* check for end-of-block code (better have one) */
+            if (state->lens[256] == 0) {
+                strm->msg = (char *)"invalid code -- missing end-of-block";
+                mode = BAD;
+                break;
+            }
+
+            /* build code tables -- note: do not change the lenbits or distbits
+               values here (9 and 6) without reading the comments in inftree9.h
+               concerning the ENOUGH constants, which depend on those values */
+            state->next = state->codes;
+            lencode = (code const FAR *)(state->next);
+            lenbits = 9;
+            ret = inflate_table9(LENS, state->lens, state->nlen,
+                            &(state->next), &(lenbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid literal/lengths set";
+                mode = BAD;
+                break;
+            }
+            distcode = (code const FAR *)(state->next);
+            distbits = 6;
+            ret = inflate_table9(DISTS, state->lens + state->nlen,
+                            state->ndist, &(state->next), &(distbits),
+                            state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid distances set";
+                mode = BAD;
+                break;
+            }
+            Tracev((stderr, "inflate:       codes ok\n"));
+            mode = LEN;
+
+        case LEN:
+            /* get a literal, length, or end-of-block code */
+            for (;;) {
+                here = lencode[BITS(lenbits)];
+                if ((unsigned)(here.bits) <= bits) break;
+                PULLBYTE();
+            }
+            if (here.op && (here.op & 0xf0) == 0) {
+                last = here;
+                for (;;) {
+                    here = lencode[last.val +
+                            (BITS(last.bits + last.op) >> last.bits)];
+                    if ((unsigned)(last.bits + here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                DROPBITS(last.bits);
+            }
+            DROPBITS(here.bits);
+            length = (unsigned)here.val;
+
+            /* process literal */
+            if (here.op == 0) {
+                Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+                        "inflate:         literal '%c'\n" :
+                        "inflate:         literal 0x%02x\n", here.val));
+                ROOM();
+                *put++ = (unsigned char)(length);
+                left--;
+                mode = LEN;
+                break;
+            }
+
+            /* process end of block */
+            if (here.op & 32) {
+                Tracevv((stderr, "inflate:         end of block\n"));
+                mode = TYPE;
+                break;
+            }
+
+            /* invalid code */
+            if (here.op & 64) {
+                strm->msg = (char *)"invalid literal/length code";
+                mode = BAD;
+                break;
+            }
+
+            /* length code -- get extra bits, if any */
+            extra = (unsigned)(here.op) & 31;
+            if (extra != 0) {
+                NEEDBITS(extra);
+                length += BITS(extra);
+                DROPBITS(extra);
+            }
+            Tracevv((stderr, "inflate:         length %lu\n", length));
+
+            /* get distance code */
+            for (;;) {
+                here = distcode[BITS(distbits)];
+                if ((unsigned)(here.bits) <= bits) break;
+                PULLBYTE();
+            }
+            if ((here.op & 0xf0) == 0) {
+                last = here;
+                for (;;) {
+                    here = distcode[last.val +
+                            (BITS(last.bits + last.op) >> last.bits)];
+                    if ((unsigned)(last.bits + here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                DROPBITS(last.bits);
+            }
+            DROPBITS(here.bits);
+            if (here.op & 64) {
+                strm->msg = (char *)"invalid distance code";
+                mode = BAD;
+                break;
+            }
+            offset = (unsigned)here.val;
+
+            /* get distance extra bits, if any */
+            extra = (unsigned)(here.op) & 15;
+            if (extra != 0) {
+                NEEDBITS(extra);
+                offset += BITS(extra);
+                DROPBITS(extra);
+            }
+            if (offset > WSIZE - (wrap ? 0: left)) {
+                strm->msg = (char *)"invalid distance too far back";
+                mode = BAD;
+                break;
+            }
+            Tracevv((stderr, "inflate:         distance %lu\n", offset));
+
+            /* copy match from window to output */
+            do {
+                ROOM();
+                copy = WSIZE - offset;
+                if (copy < left) {
+                    from = put + copy;
+                    copy = left - copy;
+                }
+                else {
+                    from = put - offset;
+                    copy = left;
+                }
+                if (copy > length) copy = length;
+                length -= copy;
+                left -= copy;
+                do {
+                    *put++ = *from++;
+                } while (--copy);
+            } while (length != 0);
+            break;
+
+        case DONE:
+            /* inflate stream terminated properly -- write leftover output */
+            ret = Z_STREAM_END;
+            if (left < WSIZE) {
+                if (out(out_desc, window, (unsigned)(WSIZE - left)))
+                    ret = Z_BUF_ERROR;
+            }
+            goto inf_leave;
+
+        case BAD:
+            ret = Z_DATA_ERROR;
+            goto inf_leave;
+
+        default:                /* can't happen, but makes compilers happy */
+            ret = Z_STREAM_ERROR;
+            goto inf_leave;
+        }
+
+    /* Return unused input */
+  inf_leave:
+    strm->next_in = next;
+    strm->avail_in = have;
+    return ret;
+}
+
+int ZEXPORT inflateBack9End(strm)
+z_stream FAR *strm;
+{
+    if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
+        return Z_STREAM_ERROR;
+    ZFREE(strm, strm->state);
+    strm->state = Z_NULL;
+    Tracev((stderr, "inflate: end\n"));
+    return Z_OK;
+}

contrib/infback9/infback9.h

@@ -0,0 +1,37 @@
+/* infback9.h -- header for using inflateBack9 functions
+ * Copyright (C) 2003 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ * This header file and associated patches provide a decoder for PKWare's
+ * undocumented deflate64 compression method (method 9).  Use with infback9.c,
+ * inftree9.h, inftree9.c, and inffix9.h.  These patches are not supported.
+ * This should be compiled with zlib, since it uses zutil.h and zutil.o.
+ * This code has not yet been tested on 16-bit architectures.  See the
+ * comments in zlib.h for inflateBack() usage.  These functions are used
+ * identically, except that there is no windowBits parameter, and a 64K
+ * window must be provided.  Also if int's are 16 bits, then a zero for
+ * the third parameter of the "out" function actually means 65536UL.
+ * zlib.h must be included before this header file.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+ZEXTERN int ZEXPORT inflateBack9 OF((z_stream FAR *strm,
+                                    in_func in, void FAR *in_desc,
+                                    out_func out, void FAR *out_desc));
+ZEXTERN int ZEXPORT inflateBack9End OF((z_stream FAR *strm));
+ZEXTERN int ZEXPORT inflateBack9Init_ OF((z_stream FAR *strm,
+                                         unsigned char FAR *window,
+                                         const char *version,
+                                         int stream_size));
+#define inflateBack9Init(strm, window) \
+        inflateBack9Init_((strm), (window), \
+        ZLIB_VERSION, sizeof(z_stream))
+
+#ifdef __cplusplus
+}
+#endif

contrib/infback9/inffix9.h

@@ -0,0 +1,107 @@
+    /* inffix9.h -- table for decoding deflate64 fixed codes
+     * Generated automatically by makefixed9().
+     */
+
+    /* WARNING: this file should *not* be used by applications.
+       It is part of the implementation of this library and is
+       subject to change. Applications should only use zlib.h.
+     */
+
+    static const code lenfix[512] = {
+        {96,7,0},{0,8,80},{0,8,16},{132,8,115},{130,7,31},{0,8,112},
+        {0,8,48},{0,9,192},{128,7,10},{0,8,96},{0,8,32},{0,9,160},
+        {0,8,0},{0,8,128},{0,8,64},{0,9,224},{128,7,6},{0,8,88},
+        {0,8,24},{0,9,144},{131,7,59},{0,8,120},{0,8,56},{0,9,208},
+        {129,7,17},{0,8,104},{0,8,40},{0,9,176},{0,8,8},{0,8,136},
+        {0,8,72},{0,9,240},{128,7,4},{0,8,84},{0,8,20},{133,8,227},
+        {131,7,43},{0,8,116},{0,8,52},{0,9,200},{129,7,13},{0,8,100},
+        {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},
+        {128,7,8},{0,8,92},{0,8,28},{0,9,152},{132,7,83},{0,8,124},
+        {0,8,60},{0,9,216},{130,7,23},{0,8,108},{0,8,44},{0,9,184},
+        {0,8,12},{0,8,140},{0,8,76},{0,9,248},{128,7,3},{0,8,82},
+        {0,8,18},{133,8,163},{131,7,35},{0,8,114},{0,8,50},{0,9,196},
+        {129,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2},{0,8,130},
+        {0,8,66},{0,9,228},{128,7,7},{0,8,90},{0,8,26},{0,9,148},
+        {132,7,67},{0,8,122},{0,8,58},{0,9,212},{130,7,19},{0,8,106},
+        {0,8,42},{0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},
+        {128,7,5},{0,8,86},{0,8,22},{65,8,0},{131,7,51},{0,8,118},
+        {0,8,54},{0,9,204},{129,7,15},{0,8,102},{0,8,38},{0,9,172},
+        {0,8,6},{0,8,134},{0,8,70},{0,9,236},{128,7,9},{0,8,94},
+        {0,8,30},{0,9,156},{132,7,99},{0,8,126},{0,8,62},{0,9,220},
+        {130,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142},
+        {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{133,8,131},
+        {130,7,31},{0,8,113},{0,8,49},{0,9,194},{128,7,10},{0,8,97},
+        {0,8,33},{0,9,162},{0,8,1},{0,8,129},{0,8,65},{0,9,226},
+        {128,7,6},{0,8,89},{0,8,25},{0,9,146},{131,7,59},{0,8,121},
+        {0,8,57},{0,9,210},{129,7,17},{0,8,105},{0,8,41},{0,9,178},
+        {0,8,9},{0,8,137},{0,8,73},{0,9,242},{128,7,4},{0,8,85},
+        {0,8,21},{144,8,3},{131,7,43},{0,8,117},{0,8,53},{0,9,202},
+        {129,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},
+        {0,8,69},{0,9,234},{128,7,8},{0,8,93},{0,8,29},{0,9,154},
+        {132,7,83},{0,8,125},{0,8,61},{0,9,218},{130,7,23},{0,8,109},
+        {0,8,45},{0,9,186},{0,8,13},{0,8,141},{0,8,77},{0,9,250},
+        {128,7,3},{0,8,83},{0,8,19},{133,8,195},{131,7,35},{0,8,115},
+        {0,8,51},{0,9,198},{129,7,11},{0,8,99},{0,8,35},{0,9,166},
+        {0,8,3},{0,8,131},{0,8,67},{0,9,230},{128,7,7},{0,8,91},
+        {0,8,27},{0,9,150},{132,7,67},{0,8,123},{0,8,59},{0,9,214},
+        {130,7,19},{0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},
+        {0,8,75},{0,9,246},{128,7,5},{0,8,87},{0,8,23},{77,8,0},
+        {131,7,51},{0,8,119},{0,8,55},{0,9,206},{129,7,15},{0,8,103},
+        {0,8,39},{0,9,174},{0,8,7},{0,8,135},{0,8,71},{0,9,238},
+        {128,7,9},{0,8,95},{0,8,31},{0,9,158},{132,7,99},{0,8,127},
+        {0,8,63},{0,9,222},{130,7,27},{0,8,111},{0,8,47},{0,9,190},
+        {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},
+        {0,8,16},{132,8,115},{130,7,31},{0,8,112},{0,8,48},{0,9,193},
+        {128,7,10},{0,8,96},{0,8,32},{0,9,161},{0,8,0},{0,8,128},
+        {0,8,64},{0,9,225},{128,7,6},{0,8,88},{0,8,24},{0,9,145},
+        {131,7,59},{0,8,120},{0,8,56},{0,9,209},{129,7,17},{0,8,104},
+        {0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72},{0,9,241},
+        {128,7,4},{0,8,84},{0,8,20},{133,8,227},{131,7,43},{0,8,116},
+        {0,8,52},{0,9,201},{129,7,13},{0,8,100},{0,8,36},{0,9,169},
+        {0,8,4},{0,8,132},{0,8,68},{0,9,233},{128,7,8},{0,8,92},
+        {0,8,28},{0,9,153},{132,7,83},{0,8,124},{0,8,60},{0,9,217},
+        {130,7,23},{0,8,108},{0,8,44},{0,9,185},{0,8,12},{0,8,140},
+        {0,8,76},{0,9,249},{128,7,3},{0,8,82},{0,8,18},{133,8,163},
+        {131,7,35},{0,8,114},{0,8,50},{0,9,197},{129,7,11},{0,8,98},
+        {0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229},
+        {128,7,7},{0,8,90},{0,8,26},{0,9,149},{132,7,67},{0,8,122},
+        {0,8,58},{0,9,213},{130,7,19},{0,8,106},{0,8,42},{0,9,181},
+        {0,8,10},{0,8,138},{0,8,74},{0,9,245},{128,7,5},{0,8,86},
+        {0,8,22},{65,8,0},{131,7,51},{0,8,118},{0,8,54},{0,9,205},
+        {129,7,15},{0,8,102},{0,8,38},{0,9,173},{0,8,6},{0,8,134},
+        {0,8,70},{0,9,237},{128,7,9},{0,8,94},{0,8,30},{0,9,157},
+        {132,7,99},{0,8,126},{0,8,62},{0,9,221},{130,7,27},{0,8,110},
+        {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},
+        {96,7,0},{0,8,81},{0,8,17},{133,8,131},{130,7,31},{0,8,113},
+        {0,8,49},{0,9,195},{128,7,10},{0,8,97},{0,8,33},{0,9,163},
+        {0,8,1},{0,8,129},{0,8,65},{0,9,227},{128,7,6},{0,8,89},
+        {0,8,25},{0,9,147},{131,7,59},{0,8,121},{0,8,57},{0,9,211},
+        {129,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9},{0,8,137},
+        {0,8,73},{0,9,243},{128,7,4},{0,8,85},{0,8,21},{144,8,3},
+        {131,7,43},{0,8,117},{0,8,53},{0,9,203},{129,7,13},{0,8,101},
+        {0,8,37},{0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},
+        {128,7,8},{0,8,93},{0,8,29},{0,9,155},{132,7,83},{0,8,125},
+        {0,8,61},{0,9,219},{130,7,23},{0,8,109},{0,8,45},{0,9,187},
+        {0,8,13},{0,8,141},{0,8,77},{0,9,251},{128,7,3},{0,8,83},
+        {0,8,19},{133,8,195},{131,7,35},{0,8,115},{0,8,51},{0,9,199},
+        {129,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131},
+        {0,8,67},{0,9,231},{128,7,7},{0,8,91},{0,8,27},{0,9,151},
+        {132,7,67},{0,8,123},{0,8,59},{0,9,215},{130,7,19},{0,8,107},
+        {0,8,43},{0,9,183},{0,8,11},{0,8,139},{0,8,75},{0,9,247},
+        {128,7,5},{0,8,87},{0,8,23},{77,8,0},{131,7,51},{0,8,119},
+        {0,8,55},{0,9,207},{129,7,15},{0,8,103},{0,8,39},{0,9,175},
+        {0,8,7},{0,8,135},{0,8,71},{0,9,239},{128,7,9},{0,8,95},
+        {0,8,31},{0,9,159},{132,7,99},{0,8,127},{0,8,63},{0,9,223},
+        {130,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},
+        {0,8,79},{0,9,255}
+    };
+
+    static const code distfix[32] = {
+        {128,5,1},{135,5,257},{131,5,17},{139,5,4097},{129,5,5},
+        {137,5,1025},{133,5,65},{141,5,16385},{128,5,3},{136,5,513},
+        {132,5,33},{140,5,8193},{130,5,9},{138,5,2049},{134,5,129},
+        {142,5,32769},{128,5,2},{135,5,385},{131,5,25},{139,5,6145},
+        {129,5,7},{137,5,1537},{133,5,97},{141,5,24577},{128,5,4},
+        {136,5,769},{132,5,49},{140,5,12289},{130,5,13},{138,5,3073},
+        {134,5,193},{142,5,49153}
+    };

contrib/infback9/inflate9.h

@@ -0,0 +1,47 @@
+/* inflate9.h -- internal inflate state definition
+ * Copyright (C) 1995-2003 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* Possible inflate modes between inflate() calls */
+typedef enum {
+        TYPE,       /* i: waiting for type bits, including last-flag bit */
+        STORED,     /* i: waiting for stored size (length and complement) */
+        TABLE,      /* i: waiting for dynamic block table lengths */
+            LEN,        /* i: waiting for length/lit code */
+    DONE,       /* finished check, done -- remain here until reset */
+    BAD         /* got a data error -- remain here until reset */
+} inflate_mode;
+
+/*
+    State transitions between above modes -
+
+    (most modes can go to the BAD mode -- not shown for clarity)
+
+    Read deflate blocks:
+            TYPE -> STORED or TABLE or LEN or DONE
+            STORED -> TYPE
+            TABLE -> LENLENS -> CODELENS -> LEN
+    Read deflate codes:
+                LEN -> LEN or TYPE
+ */
+
+/* state maintained between inflate() calls.  Approximately 7K bytes. */
+struct inflate_state {
+        /* sliding window */
+    unsigned char FAR *window;  /* allocated sliding window, if needed */
+        /* dynamic table building */
+    unsigned ncode;             /* number of code length code lengths */
+    unsigned nlen;              /* number of length code lengths */
+    unsigned ndist;             /* number of distance code lengths */
+    unsigned have;              /* number of code lengths in lens[] */
+    code FAR *next;             /* next available space in codes[] */
+    unsigned short lens[320];   /* temporary storage for code lengths */
+    unsigned short work[288];   /* work area for code table building */
+    code codes[ENOUGH];         /* space for code tables */
+};

contrib/infback9/inftree9.c

@@ -0,0 +1,324 @@
+/* inftree9.c -- generate Huffman trees for efficient decoding
+ * Copyright (C) 1995-2012 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftree9.h"
+
+#define MAXBITS 15
+
+const char inflate9_copyright[] =
+   " inflate9 1.2.7.1 Copyright 1995-2012 Mark Adler ";
+/*
+  If you use the zlib library in a product, an acknowledgment is welcome
+  in the documentation of your product. If for some reason you cannot
+  include such an acknowledgment, I would appreciate that you keep this
+  copyright string in the executable of your product.
+ */
+
+/*
+   Build a set of tables to decode the provided canonical Huffman code.
+   The code lengths are lens[0..codes-1].  The result starts at *table,
+   whose indices are 0..2^bits-1.  work is a writable array of at least
+   lens shorts, which is used as a work area.  type is the type of code
+   to be generated, CODES, LENS, or DISTS.  On return, zero is success,
+   -1 is an invalid code, and +1 means that ENOUGH isn't enough.  table
+   on return points to the next available entry's address.  bits is the
+   requested root table index bits, and on return it is the actual root
+   table index bits.  It will differ if the request is greater than the
+   longest code or if it is less than the shortest code.
+ */
+int inflate_table9(type, lens, codes, table, bits, work)
+codetype type;
+unsigned short FAR *lens;
+unsigned codes;
+code FAR * FAR *table;
+unsigned FAR *bits;
+unsigned short FAR *work;
+{
+    unsigned len;               /* a code's length in bits */
+    unsigned sym;               /* index of code symbols */
+    unsigned min, max;          /* minimum and maximum code lengths */
+    unsigned root;              /* number of index bits for root table */
+    unsigned curr;              /* number of index bits for current table */
+    unsigned drop;              /* code bits to drop for sub-table */
+    int left;                   /* number of prefix codes available */
+    unsigned used;              /* code entries in table used */
+    unsigned huff;              /* Huffman code */
+    unsigned incr;              /* for incrementing code, index */
+    unsigned fill;              /* index for replicating entries */
+    unsigned low;               /* low bits for current root entry */
+    unsigned mask;              /* mask for low root bits */
+    code this;                  /* table entry for duplication */
+    code FAR *next;             /* next available space in table */
+    const unsigned short FAR *base;     /* base value table to use */
+    const unsigned short FAR *extra;    /* extra bits table to use */
+    int end;                    /* use base and extra for symbol > end */
+    unsigned short count[MAXBITS+1];    /* number of codes of each length */
+    unsigned short offs[MAXBITS+1];     /* offsets in table for each length */
+    static const unsigned short lbase[31] = { /* Length codes 257..285 base */
+        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17,
+        19, 23, 27, 31, 35, 43, 51, 59, 67, 83, 99, 115,
+        131, 163, 195, 227, 3, 0, 0};
+    static const unsigned short lext[31] = { /* Length codes 257..285 extra */
+        128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
+        130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
+        133, 133, 133, 133, 144, 79, 204};
+    static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
+        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
+        65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,
+        4097, 6145, 8193, 12289, 16385, 24577, 32769, 49153};
+    static const unsigned short dext[32] = { /* Distance codes 0..31 extra */
+        128, 128, 128, 128, 129, 129, 130, 130, 131, 131, 132, 132,
+        133, 133, 134, 134, 135, 135, 136, 136, 137, 137, 138, 138,
+        139, 139, 140, 140, 141, 141, 142, 142};
+
+    /*
+       Process a set of code lengths to create a canonical Huffman code.  The
+       code lengths are lens[0..codes-1].  Each length corresponds to the
+       symbols 0..codes-1.  The Huffman code is generated by first sorting the
+       symbols by length from short to long, and retaining the symbol order
+       for codes with equal lengths.  Then the code starts with all zero bits
+       for the first code of the shortest length, and the codes are integer
+       increments for the same length, and zeros are appended as the length
+       increases.  For the deflate format, these bits are stored backwards
+       from their more natural integer increment ordering, and so when the
+       decoding tables are built in the large loop below, the integer codes
+       are incremented backwards.
+
+       This routine assumes, but does not check, that all of the entries in
+       lens[] are in the range 0..MAXBITS.  The caller must assure this.
+       1..MAXBITS is interpreted as that code length.  zero means that that
+       symbol does not occur in this code.
+
+       The codes are sorted by computing a count of codes for each length,
+       creating from that a table of starting indices for each length in the
+       sorted table, and then entering the symbols in order in the sorted
+       table.  The sorted table is work[], with that space being provided by
+       the caller.
+
+       The length counts are used for other purposes as well, i.e. finding
+       the minimum and maximum length codes, determining if there are any
+       codes at all, checking for a valid set of lengths, and looking ahead
+       at length counts to determine sub-table sizes when building the
+       decoding tables.
+     */
+
+    /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
+    for (len = 0; len <= MAXBITS; len++)
+        count[len] = 0;
+    for (sym = 0; sym < codes; sym++)
+        count[lens[sym]]++;
+
+    /* bound code lengths, force root to be within code lengths */
+    root = *bits;
+    for (max = MAXBITS; max >= 1; max--)
+        if (count[max] != 0) break;
+    if (root > max) root = max;
+    if (max == 0) return -1;            /* no codes! */
+    for (min = 1; min <= MAXBITS; min++)
+        if (count[min] != 0) break;
+    if (root < min) root = min;
+
+    /* check for an over-subscribed or incomplete set of lengths */
+    left = 1;
+    for (len = 1; len <= MAXBITS; len++) {
+        left <<= 1;
+        left -= count[len];
+        if (left < 0) return -1;        /* over-subscribed */
+    }
+    if (left > 0 && (type == CODES || max != 1))
+        return -1;                      /* incomplete set */
+
+    /* generate offsets into symbol table for each length for sorting */
+    offs[1] = 0;
+    for (len = 1; len < MAXBITS; len++)
+        offs[len + 1] = offs[len] + count[len];
+
+    /* sort symbols by length, by symbol order within each length */
+    for (sym = 0; sym < codes; sym++)
+        if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
+
+    /*
+       Create and fill in decoding tables.  In this loop, the table being
+       filled is at next and has curr index bits.  The code being used is huff
+       with length len.  That code is converted to an index by dropping drop
+       bits off of the bottom.  For codes where len is less than drop + curr,
+       those top drop + curr - len bits are incremented through all values to
+       fill the table with replicated entries.
+
+       root is the number of index bits for the root table.  When len exceeds
+       root, sub-tables are created pointed to by the root entry with an index
+       of the low root bits of huff.  This is saved in low to check for when a
+       new sub-table should be started.  drop is zero when the root table is
+       being filled, and drop is root when sub-tables are being filled.
+
+       When a new sub-table is needed, it is necessary to look ahead in the
+       code lengths to determine what size sub-table is needed.  The length
+       counts are used for this, and so count[] is decremented as codes are
+       entered in the tables.
+
+       used keeps track of how many table entries have been allocated from the
+       provided *table space.  It is checked for LENS and DIST tables against
+       the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in
+       the initial root table size constants.  See the comments in inftree9.h
+       for more information.
+
+       sym increments through all symbols, and the loop terminates when
+       all codes of length max, i.e. all codes, have been processed.  This
+       routine permits incomplete codes, so another loop after this one fills
+       in the rest of the decoding tables with invalid code markers.
+     */
+
+    /* set up for code type */
+    switch (type) {
+    case CODES:
+        base = extra = work;    /* dummy value--not used */
+        end = 19;
+        break;
+    case LENS:
+        base = lbase;
+        base -= 257;
+        extra = lext;
+        extra -= 257;
+        end = 256;
+        break;
+    default:            /* DISTS */
+        base = dbase;
+        extra = dext;
+        end = -1;
+    }
+
+    /* initialize state for loop */
+    huff = 0;                   /* starting code */
+    sym = 0;                    /* starting code symbol */
+    len = min;                  /* starting code length */
+    next = *table;              /* current table to fill in */
+    curr = root;                /* current table index bits */
+    drop = 0;                   /* current bits to drop from code for index */
+    low = (unsigned)(-1);       /* trigger new sub-table when len > root */
+    used = 1U << root;          /* use root table entries */
+    mask = used - 1;            /* mask for comparing low */
+
+    /* check available table space */
+    if ((type == LENS && used >= ENOUGH_LENS) ||
+        (type == DISTS && used >= ENOUGH_DISTS))
+        return 1;
+
+    /* process all codes and make table entries */
+    for (;;) {
+        /* create table entry */
+        this.bits = (unsigned char)(len - drop);
+        if ((int)(work[sym]) < end) {
+            this.op = (unsigned char)0;
+            this.val = work[sym];
+        }
+        else if ((int)(work[sym]) > end) {
+            this.op = (unsigned char)(extra[work[sym]]);
+            this.val = base[work[sym]];
+        }
+        else {
+            this.op = (unsigned char)(32 + 64);         /* end of block */
+            this.val = 0;
+        }
+
+        /* replicate for those indices with low len bits equal to huff */
+        incr = 1U << (len - drop);
+        fill = 1U << curr;
+        do {
+            fill -= incr;
+            next[(huff >> drop) + fill] = this;
+        } while (fill != 0);
+
+        /* backwards increment the len-bit code huff */
+        incr = 1U << (len - 1);
+        while (huff & incr)
+            incr >>= 1;
+        if (incr != 0) {
+            huff &= incr - 1;
+            huff += incr;
+        }
+        else
+            huff = 0;
+
+        /* go to next symbol, update count, len */
+        sym++;
+        if (--(count[len]) == 0) {
+            if (len == max) break;
+            len = lens[work[sym]];
+        }
+
+        /* create new sub-table if needed */
+        if (len > root && (huff & mask) != low) {
+            /* if first time, transition to sub-tables */
+            if (drop == 0)
+                drop = root;
+
+            /* increment past last table */
+            next += 1U << curr;
+
+            /* determine length of next table */
+            curr = len - drop;
+            left = (int)(1 << curr);
+            while (curr + drop < max) {
+                left -= count[curr + drop];
+                if (left <= 0) break;
+                curr++;
+                left <<= 1;
+            }
+
+            /* check for enough space */
+            used += 1U << curr;
+            if ((type == LENS && used >= ENOUGH_LENS) ||
+                (type == DISTS && used >= ENOUGH_DISTS))
+                return 1;
+
+            /* point entry in root table to sub-table */
+            low = huff & mask;
+            (*table)[low].op = (unsigned char)curr;
+            (*table)[low].bits = (unsigned char)root;
+            (*table)[low].val = (unsigned short)(next - *table);
+        }
+    }
+
+    /*
+       Fill in rest of table for incomplete codes.  This loop is similar to the
+       loop above in incrementing huff for table indices.  It is assumed that
+       len is equal to curr + drop, so there is no loop needed to increment
+       through high index bits.  When the current sub-table is filled, the loop
+       drops back to the root table to fill in any remaining entries there.
+     */
+    this.op = (unsigned char)64;                /* invalid code marker */
+    this.bits = (unsigned char)(len - drop);
+    this.val = (unsigned short)0;
+    while (huff != 0) {
+        /* when done with sub-table, drop back to root table */
+        if (drop != 0 && (huff & mask) != low) {
+            drop = 0;
+            len = root;
+            next = *table;
+            curr = root;
+            this.bits = (unsigned char)len;
+        }
+
+        /* put invalid code marker in table */
+        next[huff >> drop] = this;
+
+        /* backwards increment the len-bit code huff */
+        incr = 1U << (len - 1);
+        while (huff & incr)
+            incr >>= 1;
+        if (incr != 0) {
+            huff &= incr - 1;
+            huff += incr;
+        }
+        else
+            huff = 0;
+    }
+
+    /* set return parameters */
+    *table += used;
+    *bits = root;
+    return 0;
+}

contrib/infback9/inftree9.h

@@ -0,0 +1,61 @@
+/* inftree9.h -- header to use inftree9.c
+ * Copyright (C) 1995-2008 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* Structure for decoding tables.  Each entry provides either the
+   information needed to do the operation requested by the code that
+   indexed that table entry, or it provides a pointer to another
+   table that indexes more bits of the code.  op indicates whether
+   the entry is a pointer to another table, a literal, a length or
+   distance, an end-of-block, or an invalid code.  For a table
+   pointer, the low four bits of op is the number of index bits of
+   that table.  For a length or distance, the low four bits of op
+   is the number of extra bits to get after the code.  bits is
+   the number of bits in this code or part of the code to drop off
+   of the bit buffer.  val is the actual byte to output in the case
+   of a literal, the base length or distance, or the offset from
+   the current table to the next table.  Each entry is four bytes. */
+typedef struct {
+    unsigned char op;           /* operation, extra bits, table bits */
+    unsigned char bits;         /* bits in this part of the code */
+    unsigned short val;         /* offset in table or code value */
+} code;
+
+/* op values as set by inflate_table():
+    00000000 - literal
+    0000tttt - table link, tttt != 0 is the number of table index bits
+    100eeeee - length or distance, eeee is the number of extra bits
+    01100000 - end of block
+    01000000 - invalid code
+ */
+
+/* Maximum size of the dynamic table.  The maximum number of code structures is
+   1446, which is the sum of 852 for literal/length codes and 594 for distance
+   codes.  These values were found by exhaustive searches using the program
+   examples/enough.c found in the zlib distribtution.  The arguments to that
+   program are the number of symbols, the initial root table size, and the
+   maximum bit length of a code.  "enough 286 9 15" for literal/length codes
+   returns returns 852, and "enough 32 6 15" for distance codes returns 594.
+   The initial root table size (9 or 6) is found in the fifth argument of the
+   inflate_table() calls in infback9.c.  If the root table size is changed,
+   then these maximum sizes would be need to be recalculated and updated. */
+#define ENOUGH_LENS 852
+#define ENOUGH_DISTS 594
+#define ENOUGH (ENOUGH_LENS+ENOUGH_DISTS)
+
+/* Type of code to build for inflate_table9() */
+typedef enum {
+    CODES,
+    LENS,
+    DISTS
+} codetype;
+
+extern int inflate_table9 OF((codetype type, unsigned short FAR *lens,
+                             unsigned codes, code FAR * FAR *table,
+                             unsigned FAR *bits, unsigned short FAR *work));

contrib/inflate86/inffast.S

@@ -61,7 +61,7 @@
  */
 #if ! defined( GAS_COFF ) && ! defined( GAS_ELF )
 
-#if defined( __CYGWIN__ )
+#if defined( WIN32 ) || defined( __CYGWIN__ )
 #define GAS_COFF /* windows object format */
 #else
 #define GAS_ELF
@@ -151,14 +151,14 @@
  */
 #define mode_state     0   /* state->mode */
 #define wsize_state    32  /* state->wsize */
-#define write_state    36  /* state->write */
-#define window_state   40  /* state->window */
-#define hold_state     44  /* state->hold */
-#define bits_state     48  /* state->bits */
-#define lencode_state  64  /* state->lencode */
-#define distcode_state 68  /* state->distcode */
-#define lenbits_state  72  /* state->lenbits */
-#define distbits_state 76  /* state->distbits */
+#define write_state    40  /* state->write */
+#define window_state   44  /* state->window */
+#define hold_state     48  /* state->hold */
+#define bits_state     52  /* state->bits */
+#define lencode_state  68  /* state->lencode */
+#define distcode_state 72  /* state->distcode */
+#define lenbits_state  76  /* state->lenbits */
+#define distbits_state 80  /* state->distbits */
 
 /*
  * inflate_fast's activation record
@@ -188,17 +188,8 @@
 /*
  * typedef enum inflate_mode consts, in inflate.h
  */
-#ifndef NO_GUNZIP
-#define GUNZIP
-#endif
-
-#ifdef GUNZIP
 #define INFLATE_MODE_TYPE 11  /* state->mode flags enum-ed in inflate.h */
 #define INFLATE_MODE_BAD  26
-#else
-#define INFLATE_MODE_TYPE 3
-#define INFLATE_MODE_BAD  17
-#endif
 
 
 #if ! defined( USE_MMX ) && ! defined( NO_MMX )

contrib/iostream/zfstream.cpp

@@ -1,5 +1,4 @@
 
-#include <memory.h>
 #include "zfstream.h"
 
 gzfilebuf::gzfilebuf() :
@@ -23,9 +22,7 @@ gzfilebuf *gzfilebuf::open( const char *name,
     return NULL;
 
   char char_mode[10];
-  char *p;
-  memset(char_mode,'\0',10);
-  p = char_mode;
+  char *p = char_mode;
 
   if ( io_mode & ios::in ) {
     mode = ios::in;
@@ -48,6 +45,9 @@ gzfilebuf *gzfilebuf::open( const char *name,
     *p++ = '9';
   }
 
+  // Put the end-of-string indicator
+  *p = '\0';
+
   if ( (file = gzopen(name, char_mode)) == NULL )
     return NULL;
 
@@ -64,9 +64,7 @@ gzfilebuf *gzfilebuf::attach( int file_descriptor,
     return NULL;
 
   char char_mode[10];
-  char *p;
-  memset(char_mode,'\0',10);
-  p = char_mode;
+  char *p = char_mode;
 
   if ( io_mode & ios::in ) {
     mode = ios::in;
@@ -89,6 +87,9 @@ gzfilebuf *gzfilebuf::attach( int file_descriptor,
     *p++ = '9';
   }
 
+  // Put the end-of-string indicator
+  *p = '\0';
+
   if ( (file = gzdopen(file_descriptor, char_mode)) == NULL )
     return NULL;
 
@@ -112,13 +113,13 @@ gzfilebuf *gzfilebuf::close() {
 
 }
 
-int gzfilebuf::setcompressionlevel( short comp_level ) {
+int gzfilebuf::setcompressionlevel( int comp_level ) {
 
   return gzsetparams(file, comp_level, -2);
 
 }
 
-int gzfilebuf::setcompressionstrategy( short comp_strategy ) {
+int gzfilebuf::setcompressionstrategy( int comp_strategy ) {
 
   return gzsetparams(file, -2, comp_strategy);
 
@@ -282,10 +283,9 @@ void gzfilestream_common::close() {
 
 }
 
-gzfilebuf *gzfilestream_common::rdbuf() {
-
+gzfilebuf *gzfilestream_common::rdbuf()
+{
   return &buffer;
-
 }
 
 gzifstream::gzifstream() :

contrib/iostream/zfstream.h

@@ -1,6 +1,6 @@
 
-#ifndef _zfstream_h
-#define _zfstream_h
+#ifndef zfstream_h
+#define zfstream_h
 
 #include <fstream.h>
 #include "zlib.h"
@@ -16,8 +16,8 @@ public:
   gzfilebuf *attach( int file_descriptor, int io_mode );
   gzfilebuf *close();
 
-  int setcompressionlevel( short comp_level );
-  int setcompressionstrategy( short comp_strategy );
+  int setcompressionlevel( int comp_level );
+  int setcompressionstrategy( int comp_strategy );
 
   inline int is_open() const { return (file !=NULL); }
 
@@ -98,18 +98,19 @@ private:
   T val;
 };
 
-template<class T> gzofstream &operator<<(gzofstream &s,
-					 const gzomanip<T> &m) {
+template<class T> gzofstream &operator<<(gzofstream &s, const gzomanip<T> &m)
+{
   return (*m.func)(s, m.val);
-  
 }
 
-inline gzofstream &setcompressionlevel( gzofstream &s, int l ) {
+inline gzofstream &setcompressionlevel( gzofstream &s, int l )
+{
   (s.rdbuf())->setcompressionlevel(l);
   return s;
 }
 
-inline gzofstream &setcompressionstrategy( gzofstream &s, int l ) {
+inline gzofstream &setcompressionstrategy( gzofstream &s, int l )
+{
   (s.rdbuf())->setcompressionstrategy(l);
   return s;
 }
@@ -125,18 +126,3 @@ inline gzomanip<int> setcompressionstrategy(int l)
 }
 
 #endif
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-

contrib/masmx64/bld_ml64.bat

@@ -0,0 +1,2 @@
+ml64.exe /Flinffasx64 /c /Zi inffasx64.asm
+ml64.exe /Flgvmat64   /c /Zi gvmat64.asm

contrib/masmx64/gvmat64.asm

@@ -0,0 +1,553 @@
+;uInt longest_match_x64(
+;    deflate_state *s,
+;    IPos cur_match);                             /* current match */
+
+; gvmat64.asm -- Asm portion of the optimized longest_match for 32 bits x86_64
+;  (AMD64 on Athlon 64, Opteron, Phenom
+;     and Intel EM64T on Pentium 4 with EM64T, Pentium D, Core 2 Duo, Core I5/I7)
+; Copyright (C) 1995-2010 Jean-loup Gailly, Brian Raiter and Gilles Vollant.
+;
+; File written by Gilles Vollant, by converting to assembly the longest_match
+;  from Jean-loup Gailly in deflate.c of zLib and infoZip zip.
+;
+;  and by taking inspiration on asm686 with masm, optimised assembly code
+;        from Brian Raiter, written 1998
+;
+;  This software is provided 'as-is', without any express or implied
+;  warranty.  In no event will the authors be held liable for any damages
+;  arising from the use of this software.
+;
+;  Permission is granted to anyone to use this software for any purpose,
+;  including commercial applications, and to alter it and redistribute it
+;  freely, subject to the following restrictions:
+;
+;  1. The origin of this software must not be misrepresented; you must not
+;     claim that you wrote the original software. If you use this software
+;     in a product, an acknowledgment in the product documentation would be
+;     appreciated but is not required.
+;  2. Altered source versions must be plainly marked as such, and must not be
+;     misrepresented as being the original software
+;  3. This notice may not be removed or altered from any source distribution.
+;
+;
+;
+;         http://www.zlib.net
+;         http://www.winimage.com/zLibDll
+;         http://www.muppetlabs.com/~breadbox/software/assembly.html
+;
+; to compile this file for infozip Zip, I use option:
+;   ml64.exe /Flgvmat64 /c /Zi /DINFOZIP gvmat64.asm
+;
+; to compile this file for zLib, I use option:
+;   ml64.exe /Flgvmat64 /c /Zi gvmat64.asm
+; Be carrefull to adapt zlib1222add below to your version of zLib
+;   (if you use a version of zLib before 1.0.4 or after 1.2.2.2, change
+;    value of zlib1222add later)
+;
+; This file compile with Microsoft Macro Assembler (x64) for AMD64
+;
+;   ml64.exe is given with Visual Studio 2005/2008/2010 and Windows WDK
+;
+;   (you can get Windows WDK with ml64 for AMD64 from
+;      http://www.microsoft.com/whdc/Devtools/wdk/default.mspx for low price)
+;
+
+
+;uInt longest_match(s, cur_match)
+;    deflate_state *s;
+;    IPos cur_match;                             /* current match */
+.code
+longest_match PROC
+
+
+;LocalVarsSize   equ 88
+ LocalVarsSize   equ 72
+
+; register used : rax,rbx,rcx,rdx,rsi,rdi,r8,r9,r10,r11,r12
+; free register :  r14,r15
+; register can be saved : rsp
+
+ chainlenwmask   equ  rsp + 8 - LocalVarsSize    ; high word: current chain len
+                                                 ; low word: s->wmask
+;window          equ  rsp + xx - LocalVarsSize   ; local copy of s->window ; stored in r10
+;windowbestlen   equ  rsp + xx - LocalVarsSize   ; s->window + bestlen , use r10+r11
+;scanstart       equ  rsp + xx - LocalVarsSize   ; first two bytes of string ; stored in r12w
+;scanend         equ  rsp + xx - LocalVarsSize   ; last two bytes of string use ebx
+;scanalign       equ  rsp + xx - LocalVarsSize   ; dword-misalignment of string r13
+;bestlen         equ  rsp + xx - LocalVarsSize   ; size of best match so far -> r11d
+;scan            equ  rsp + xx - LocalVarsSize   ; ptr to string wanting match -> r9
+IFDEF INFOZIP
+ELSE
+ nicematch       equ  (rsp + 16 - LocalVarsSize) ; a good enough match size
+ENDIF
+
+save_rdi        equ  rsp + 24 - LocalVarsSize
+save_rsi        equ  rsp + 32 - LocalVarsSize
+save_rbx        equ  rsp + 40 - LocalVarsSize
+save_rbp        equ  rsp + 48 - LocalVarsSize
+save_r12        equ  rsp + 56 - LocalVarsSize
+save_r13        equ  rsp + 64 - LocalVarsSize
+;save_r14        equ  rsp + 72 - LocalVarsSize
+;save_r15        equ  rsp + 80 - LocalVarsSize
+
+
+; summary of register usage
+; scanend     ebx
+; scanendw    bx
+; chainlenwmask   edx
+; curmatch    rsi
+; curmatchd   esi
+; windowbestlen   r8
+; scanalign   r9
+; scanalignd  r9d
+; window      r10
+; bestlen     r11
+; bestlend    r11d
+; scanstart   r12d
+; scanstartw  r12w
+; scan        r13
+; nicematch   r14d
+; limit       r15
+; limitd      r15d
+; prev        rcx
+
+;  all the +4 offsets are due to the addition of pending_buf_size (in zlib
+;  in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, remove the +4).
+;  Note : these value are good with a 8 bytes boundary pack structure
+
+
+    MAX_MATCH           equ     258
+    MIN_MATCH           equ     3
+    MIN_LOOKAHEAD       equ     (MAX_MATCH+MIN_MATCH+1)
+
+
+;;; Offsets for fields in the deflate_state structure. These numbers
+;;; are calculated from the definition of deflate_state, with the
+;;; assumption that the compiler will dword-align the fields. (Thus,
+;;; changing the definition of deflate_state could easily cause this
+;;; program to crash horribly, without so much as a warning at
+;;; compile time. Sigh.)
+
+;  all the +zlib1222add offsets are due to the addition of fields
+;  in zlib in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+;  (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+;  if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
+
+
+IFDEF INFOZIP
+
+_DATA   SEGMENT
+COMM    window_size:DWORD
+; WMask ; 7fff
+COMM    window:BYTE:010040H
+COMM    prev:WORD:08000H
+; MatchLen : unused
+; PrevMatch : unused
+COMM    strstart:DWORD
+COMM    match_start:DWORD
+; Lookahead : ignore
+COMM    prev_length:DWORD ; PrevLen
+COMM    max_chain_length:DWORD
+COMM    good_match:DWORD
+COMM    nice_match:DWORD
+prev_ad equ OFFSET prev
+window_ad equ OFFSET window
+nicematch equ nice_match
+_DATA ENDS
+WMask equ 07fffh
+
+ELSE
+
+  IFNDEF zlib1222add
+    zlib1222add equ 8
+  ENDIF
+dsWSize         equ 56+zlib1222add+(zlib1222add/2)
+dsWMask         equ 64+zlib1222add+(zlib1222add/2)
+dsWindow        equ 72+zlib1222add
+dsPrev          equ 88+zlib1222add
+dsMatchLen      equ 128+zlib1222add
+dsPrevMatch     equ 132+zlib1222add
+dsStrStart      equ 140+zlib1222add
+dsMatchStart    equ 144+zlib1222add
+dsLookahead     equ 148+zlib1222add
+dsPrevLen       equ 152+zlib1222add
+dsMaxChainLen   equ 156+zlib1222add
+dsGoodMatch     equ 172+zlib1222add
+dsNiceMatch     equ 176+zlib1222add
+
+window_size     equ [ rcx + dsWSize]
+WMask           equ [ rcx + dsWMask]
+window_ad       equ [ rcx + dsWindow]
+prev_ad         equ [ rcx + dsPrev]
+strstart        equ [ rcx + dsStrStart]
+match_start     equ [ rcx + dsMatchStart]
+Lookahead       equ [ rcx + dsLookahead] ; 0ffffffffh on infozip
+prev_length     equ [ rcx + dsPrevLen]
+max_chain_length equ [ rcx + dsMaxChainLen]
+good_match      equ [ rcx + dsGoodMatch]
+nice_match      equ [ rcx + dsNiceMatch]
+ENDIF
+
+; parameter 1 in r8(deflate state s), param 2 in rdx (cur match)
+
+; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and
+; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp
+;
+; All registers must be preserved across the call, except for
+;   rax, rcx, rdx, r8, r9, r10, and r11, which are scratch.
+
+
+
+;;; Save registers that the compiler may be using, and adjust esp to
+;;; make room for our stack frame.
+
+
+;;; Retrieve the function arguments. r8d will hold cur_match
+;;; throughout the entire function. edx will hold the pointer to the
+;;; deflate_state structure during the function's setup (before
+;;; entering the main loop.
+
+; parameter 1 in rcx (deflate_state* s), param 2 in edx -> r8 (cur match)
+
+; this clear high 32 bits of r8, which can be garbage in both r8 and rdx
+
+        mov [save_rdi],rdi
+        mov [save_rsi],rsi
+        mov [save_rbx],rbx
+        mov [save_rbp],rbp
+IFDEF INFOZIP
+        mov r8d,ecx
+ELSE
+        mov r8d,edx
+ENDIF
+        mov [save_r12],r12
+        mov [save_r13],r13
+;        mov [save_r14],r14
+;        mov [save_r15],r15
+
+
+;;; uInt wmask = s->w_mask;
+;;; unsigned chain_length = s->max_chain_length;
+;;; if (s->prev_length >= s->good_match) {
+;;;     chain_length >>= 2;
+;;; }
+
+        mov edi, prev_length
+        mov esi, good_match
+        mov eax, WMask
+        mov ebx, max_chain_length
+        cmp edi, esi
+        jl  LastMatchGood
+        shr ebx, 2
+LastMatchGood:
+
+;;; chainlen is decremented once beforehand so that the function can
+;;; use the sign flag instead of the zero flag for the exit test.
+;;; It is then shifted into the high word, to make room for the wmask
+;;; value, which it will always accompany.
+
+        dec ebx
+        shl ebx, 16
+        or  ebx, eax
+
+;;; on zlib only
+;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+IFDEF INFOZIP
+        mov [chainlenwmask], ebx
+; on infozip nice_match = [nice_match]
+ELSE
+        mov eax, nice_match
+        mov [chainlenwmask], ebx
+        mov r10d, Lookahead
+        cmp r10d, eax
+        cmovnl r10d, eax
+        mov [nicematch],r10d
+ENDIF
+
+;;; register Bytef *scan = s->window + s->strstart;
+        mov r10, window_ad
+        mov ebp, strstart
+        lea r13, [r10 + rbp]
+
+;;; Determine how many bytes the scan ptr is off from being
+;;; dword-aligned.
+
+         mov r9,r13
+         neg r13
+         and r13,3
+
+;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+;;;     s->strstart - (IPos)MAX_DIST(s) : NIL;
+IFDEF INFOZIP
+        mov eax,07efah ; MAX_DIST = (WSIZE-MIN_LOOKAHEAD) (0x8000-(3+8+1))
+ELSE
+        mov eax, window_size
+        sub eax, MIN_LOOKAHEAD
+ENDIF
+        xor edi,edi
+        sub ebp, eax
+
+        mov r11d, prev_length
+
+        cmovng ebp,edi
+
+;;; int best_len = s->prev_length;
+
+
+;;; Store the sum of s->window + best_len in esi locally, and in esi.
+
+       lea  rsi,[r10+r11]
+
+;;; register ush scan_start = *(ushf*)scan;
+;;; register ush scan_end   = *(ushf*)(scan+best_len-1);
+;;; Posf *prev = s->prev;
+
+        movzx r12d,word ptr [r9]
+        movzx ebx, word ptr [r9 + r11 - 1]
+
+        mov rdi, prev_ad
+
+;;; Jump into the main loop.
+
+        mov edx, [chainlenwmask]
+
+        cmp bx,word ptr [rsi + r8 - 1]
+        jz  LookupLoopIsZero
+
+LookupLoop1:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+
+LoopEntry1:
+        cmp bx,word ptr [rsi + r8 - 1]
+        jz  LookupLoopIsZero
+
+LookupLoop2:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+
+LoopEntry2:
+        cmp bx,word ptr [rsi + r8 - 1]
+        jz  LookupLoopIsZero
+
+LookupLoop4:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+
+LoopEntry4:
+
+        cmp bx,word ptr [rsi + r8 - 1]
+        jnz LookupLoop1
+        jmp LookupLoopIsZero
+
+
+;;; do {
+;;;     match = s->window + cur_match;
+;;;     if (*(ushf*)(match+best_len-1) != scan_end ||
+;;;         *(ushf*)match != scan_start) continue;
+;;;     [...]
+;;; } while ((cur_match = prev[cur_match & wmask]) > limit
+;;;          && --chain_length != 0);
+;;;
+;;; Here is the inner loop of the function. The function will spend the
+;;; majority of its time in this loop, and majority of that time will
+;;; be spent in the first ten instructions.
+;;;
+;;; Within this loop:
+;;; ebx = scanend
+;;; r8d = curmatch
+;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
+;;; esi = windowbestlen - i.e., (window + bestlen)
+;;; edi = prev
+;;; ebp = limit
+
+LookupLoop:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+
+LoopEntry:
+
+        cmp bx,word ptr [rsi + r8 - 1]
+        jnz LookupLoop1
+LookupLoopIsZero:
+        cmp     r12w, word ptr [r10 + r8]
+        jnz LookupLoop1
+
+
+;;; Store the current value of chainlen.
+        mov [chainlenwmask], edx
+
+;;; Point edi to the string under scrutiny, and esi to the string we
+;;; are hoping to match it up with. In actuality, esi and edi are
+;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is
+;;; initialized to -(MAX_MATCH_8 - scanalign).
+
+        lea rsi,[r8+r10]
+        mov rdx, 0fffffffffffffef8h; -(MAX_MATCH_8)
+        lea rsi, [rsi + r13 + 0108h] ;MAX_MATCH_8]
+        lea rdi, [r9 + r13 + 0108h] ;MAX_MATCH_8]
+
+        prefetcht1 [rsi+rdx]
+        prefetcht1 [rdi+rdx]
+
+
+;;; Test the strings for equality, 8 bytes at a time. At the end,
+;;; adjust rdx so that it is offset to the exact byte that mismatched.
+;;;
+;;; We already know at this point that the first three bytes of the
+;;; strings match each other, and they can be safely passed over before
+;;; starting the compare loop. So what this code does is skip over 0-3
+;;; bytes, as much as necessary in order to dword-align the edi
+;;; pointer. (rsi will still be misaligned three times out of four.)
+;;;
+;;; It should be confessed that this loop usually does not represent
+;;; much of the total running time. Replacing it with a more
+;;; straightforward "rep cmpsb" would not drastically degrade
+;;; performance.
+
+
+LoopCmps:
+        mov rax, [rsi + rdx]
+        xor rax, [rdi + rdx]
+        jnz LeaveLoopCmps
+
+        mov rax, [rsi + rdx + 8]
+        xor rax, [rdi + rdx + 8]
+        jnz LeaveLoopCmps8
+
+
+        mov rax, [rsi + rdx + 8+8]
+        xor rax, [rdi + rdx + 8+8]
+        jnz LeaveLoopCmps16
+
+        add rdx,8+8+8
+
+        jnz short LoopCmps
+        jmp short LenMaximum
+LeaveLoopCmps16: add rdx,8
+LeaveLoopCmps8: add rdx,8
+LeaveLoopCmps:
+
+        test    eax, 0000FFFFh
+        jnz LenLower
+
+        test eax,0ffffffffh
+
+        jnz LenLower32
+
+        add rdx,4
+        shr rax,32
+        or ax,ax
+        jnz LenLower
+
+LenLower32:
+        shr eax,16
+        add rdx,2
+LenLower:   sub al, 1
+        adc rdx, 0
+;;; Calculate the length of the match. If it is longer than MAX_MATCH,
+;;; then automatically accept it as the best possible match and leave.
+
+        lea rax, [rdi + rdx]
+        sub rax, r9
+        cmp eax, MAX_MATCH
+        jge LenMaximum
+
+;;; If the length of the match is not longer than the best match we
+;;; have so far, then forget it and return to the lookup loop.
+;///////////////////////////////////
+
+        cmp eax, r11d
+        jg  LongerMatch
+
+        lea rsi,[r10+r11]
+
+        mov rdi, prev_ad
+        mov edx, [chainlenwmask]
+        jmp LookupLoop
+
+;;;         s->match_start = cur_match;
+;;;         best_len = len;
+;;;         if (len >= nice_match) break;
+;;;         scan_end = *(ushf*)(scan+best_len-1);
+
+LongerMatch:
+        mov r11d, eax
+        mov match_start, r8d
+        cmp eax, [nicematch]
+        jge LeaveNow
+
+        lea rsi,[r10+rax]
+
+        movzx   ebx, word ptr [r9 + rax - 1]
+        mov rdi, prev_ad
+        mov edx, [chainlenwmask]
+        jmp LookupLoop
+
+;;; Accept the current string, with the maximum possible length.
+
+LenMaximum:
+        mov r11d,MAX_MATCH
+        mov match_start, r8d
+
+;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+;;; return s->lookahead;
+
+LeaveNow:
+IFDEF INFOZIP
+        mov eax,r11d
+ELSE
+        mov eax, Lookahead
+        cmp r11d, eax
+        cmovng eax, r11d
+ENDIF
+
+;;; Restore the stack and return from whence we came.
+
+
+        mov rsi,[save_rsi]
+        mov rdi,[save_rdi]
+        mov rbx,[save_rbx]
+        mov rbp,[save_rbp]
+        mov r12,[save_r12]
+        mov r13,[save_r13]
+;        mov r14,[save_r14]
+;        mov r15,[save_r15]
+
+
+        ret 0
+; please don't remove this string !
+; Your can freely use gvmat64 in any free or commercial app
+; but it is far better don't remove the string in the binary!
+    db     0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998, converted to amd 64 by Gilles Vollant 2005",0dh,0ah,0
+longest_match   ENDP
+
+match_init PROC
+  ret 0
+match_init ENDP
+
+
+END

contrib/masmx64/inffas8664.c

@@ -0,0 +1,186 @@
+/* inffas8664.c is a hand tuned assembler version of inffast.c - fast decoding
+ * version for AMD64 on Windows using Microsoft C compiler
+ *
+ * Copyright (C) 1995-2003 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Copyright (C) 2003 Chris Anderson <christop@charm.net>
+ * Please use the copyright conditions above.
+ *
+ * 2005 - Adaptation to Microsoft C Compiler for AMD64 by Gilles Vollant
+ *
+ * inffas8664.c call function inffas8664fnc in inffasx64.asm
+ *  inffasx64.asm is automatically convert from AMD64 portion of inffas86.c
+ *
+ * Dec-29-2003 -- I added AMD64 inflate asm support.  This version is also
+ * slightly quicker on x86 systems because, instead of using rep movsb to copy
+ * data, it uses rep movsw, which moves data in 2-byte chunks instead of single
+ * bytes.  I've tested the AMD64 code on a Fedora Core 1 + the x86_64 updates
+ * from http://fedora.linux.duke.edu/fc1_x86_64
+ * which is running on an Athlon 64 3000+ / Gigabyte GA-K8VT800M system with
+ * 1GB ram.  The 64-bit version is about 4% faster than the 32-bit version,
+ * when decompressing mozilla-source-1.3.tar.gz.
+ *
+ * Mar-13-2003 -- Most of this is derived from inffast.S which is derived from
+ * the gcc -S output of zlib-1.2.0/inffast.c.  Zlib-1.2.0 is in beta release at
+ * the moment.  I have successfully compiled and tested this code with gcc2.96,
+ * gcc3.2, icc5.0, msvc6.0.  It is very close to the speed of inffast.S
+ * compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX
+ * enabled.  I will attempt to merge the MMX code into this version.  Newer
+ * versions of this and inffast.S can be found at
+ * http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/
+ *
+ */
+
+#include <stdio.h>
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+/* Mark Adler's comments from inffast.c: */
+
+/*
+   Decode literal, length, and distance codes and write out the resulting
+   literal and match bytes until either not enough input or output is
+   available, an end-of-block is encountered, or a data error is encountered.
+   When large enough input and output buffers are supplied to inflate(), for
+   example, a 16K input buffer and a 64K output buffer, more than 95% of the
+   inflate execution time is spent in this routine.
+
+   Entry assumptions:
+
+        state->mode == LEN
+        strm->avail_in >= 6
+        strm->avail_out >= 258
+        start >= strm->avail_out
+        state->bits < 8
+
+   On return, state->mode is one of:
+
+        LEN -- ran out of enough output space or enough available input
+        TYPE -- reached end of block code, inflate() to interpret next block
+        BAD -- error in block data
+
+   Notes:
+
+    - The maximum input bits used by a length/distance pair is 15 bits for the
+      length code, 5 bits for the length extra, 15 bits for the distance code,
+      and 13 bits for the distance extra.  This totals 48 bits, or six bytes.
+      Therefore if strm->avail_in >= 6, then there is enough input to avoid
+      checking for available input while decoding.
+
+    - The maximum bytes that a single length/distance pair can output is 258
+      bytes, which is the maximum length that can be coded.  inflate_fast()
+      requires strm->avail_out >= 258 for each loop to avoid checking for
+      output space.
+ */
+
+
+
+    typedef struct inffast_ar {
+/* 64   32                               x86  x86_64 */
+/* ar offset                              register */
+/*  0    0 */ void *esp;                /* esp save */
+/*  8    4 */ void *ebp;                /* ebp save */
+/* 16    8 */ unsigned char FAR *in;    /* esi rsi  local strm->next_in */
+/* 24   12 */ unsigned char FAR *last;  /*     r9   while in < last */
+/* 32   16 */ unsigned char FAR *out;   /* edi rdi  local strm->next_out */
+/* 40   20 */ unsigned char FAR *beg;   /*          inflate()'s init next_out */
+/* 48   24 */ unsigned char FAR *end;   /*     r10  while out < end */
+/* 56   28 */ unsigned char FAR *window;/*          size of window, wsize!=0 */
+/* 64   32 */ code const FAR *lcode;    /* ebp rbp  local strm->lencode */
+/* 72   36 */ code const FAR *dcode;    /*     r11  local strm->distcode */
+/* 80   40 */ size_t /*unsigned long */hold;       /* edx rdx  local strm->hold */
+/* 88   44 */ unsigned bits;            /* ebx rbx  local strm->bits */
+/* 92   48 */ unsigned wsize;           /*          window size */
+/* 96   52 */ unsigned write;           /*          window write index */
+/*100   56 */ unsigned lmask;           /*     r12  mask for lcode */
+/*104   60 */ unsigned dmask;           /*     r13  mask for dcode */
+/*108   64 */ unsigned len;             /*     r14  match length */
+/*112   68 */ unsigned dist;            /*     r15  match distance */
+/*116   72 */ unsigned status;          /*          set when state chng*/
+    } type_ar;
+#ifdef ASMINF
+
+void inflate_fast(strm, start)
+z_streamp strm;
+unsigned start;         /* inflate()'s starting value for strm->avail_out */
+{
+    struct inflate_state FAR *state;
+    type_ar ar;
+    void inffas8664fnc(struct inffast_ar * par);
+
+
+
+#if (defined( __GNUC__ ) && defined( __amd64__ ) && ! defined( __i386 )) || (defined(_MSC_VER) && defined(_M_AMD64))
+#define PAD_AVAIL_IN 6
+#define PAD_AVAIL_OUT 258
+#else
+#define PAD_AVAIL_IN 5
+#define PAD_AVAIL_OUT 257
+#endif
+
+    /* copy state to local variables */
+    state = (struct inflate_state FAR *)strm->state;
+
+    ar.in = strm->next_in;
+    ar.last = ar.in + (strm->avail_in - PAD_AVAIL_IN);
+    ar.out = strm->next_out;
+    ar.beg = ar.out - (start - strm->avail_out);
+    ar.end = ar.out + (strm->avail_out - PAD_AVAIL_OUT);
+    ar.wsize = state->wsize;
+    ar.write = state->wnext;
+    ar.window = state->window;
+    ar.hold = state->hold;
+    ar.bits = state->bits;
+    ar.lcode = state->lencode;
+    ar.dcode = state->distcode;
+    ar.lmask = (1U << state->lenbits) - 1;
+    ar.dmask = (1U << state->distbits) - 1;
+
+    /* decode literals and length/distances until end-of-block or not enough
+       input data or output space */
+
+    /* align in on 1/2 hold size boundary */
+    while (((size_t)(void *)ar.in & (sizeof(ar.hold) / 2 - 1)) != 0) {
+        ar.hold += (unsigned long)*ar.in++ << ar.bits;
+        ar.bits += 8;
+    }
+
+    inffas8664fnc(&ar);
+
+    if (ar.status > 1) {
+        if (ar.status == 2)
+            strm->msg = "invalid literal/length code";
+        else if (ar.status == 3)
+            strm->msg = "invalid distance code";
+        else
+            strm->msg = "invalid distance too far back";
+        state->mode = BAD;
+    }
+    else if ( ar.status == 1 ) {
+        state->mode = TYPE;
+    }
+
+    /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
+    ar.len = ar.bits >> 3;
+    ar.in -= ar.len;
+    ar.bits -= ar.len << 3;
+    ar.hold &= (1U << ar.bits) - 1;
+
+    /* update state and return */
+    strm->next_in = ar.in;
+    strm->next_out = ar.out;
+    strm->avail_in = (unsigned)(ar.in < ar.last ?
+                                PAD_AVAIL_IN + (ar.last - ar.in) :
+                                PAD_AVAIL_IN - (ar.in - ar.last));
+    strm->avail_out = (unsigned)(ar.out < ar.end ?
+                                 PAD_AVAIL_OUT + (ar.end - ar.out) :
+                                 PAD_AVAIL_OUT - (ar.out - ar.end));
+    state->hold = (unsigned long)ar.hold;
+    state->bits = ar.bits;
+    return;
+}
+
+#endif

contrib/masmx64/inffasx64.asm

@@ -0,0 +1,396 @@
+; inffasx64.asm is a hand tuned assembler version of inffast.c - fast decoding
+; version for AMD64 on Windows using Microsoft C compiler
+;
+; inffasx64.asm is automatically convert from AMD64 portion of inffas86.c
+; inffasx64.asm is called by inffas8664.c, which contain more info.
+
+
+; to compile this file, I use option
+;   ml64.exe /Flinffasx64 /c /Zi inffasx64.asm
+;   with Microsoft Macro Assembler (x64) for AMD64
+;
+
+; This file compile with Microsoft Macro Assembler (x64) for AMD64
+;
+;   ml64.exe is given with Visual Studio 2005/2008/2010 and Windows WDK
+;
+;   (you can get Windows WDK with ml64 for AMD64 from
+;      http://www.microsoft.com/whdc/Devtools/wdk/default.mspx for low price)
+;
+
+
+.code
+inffas8664fnc PROC
+
+; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and
+; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp
+;
+; All registers must be preserved across the call, except for
+;   rax, rcx, rdx, r8, r-9, r10, and r11, which are scratch.
+
+
+	mov [rsp-8],rsi
+	mov [rsp-16],rdi
+	mov [rsp-24],r12
+	mov [rsp-32],r13
+	mov [rsp-40],r14
+	mov [rsp-48],r15
+	mov [rsp-56],rbx
+
+	mov rax,rcx
+
+	mov	[rax+8], rbp       ; /* save regs rbp and rsp */
+	mov	[rax], rsp
+
+	mov	rsp, rax          ; /* make rsp point to &ar */
+
+	mov	rsi, [rsp+16]      ; /* rsi  = in */
+	mov	rdi, [rsp+32]      ; /* rdi  = out */
+	mov	r9, [rsp+24]       ; /* r9   = last */
+	mov	r10, [rsp+48]      ; /* r10  = end */
+	mov	rbp, [rsp+64]      ; /* rbp  = lcode */
+	mov	r11, [rsp+72]      ; /* r11  = dcode */
+	mov	rdx, [rsp+80]      ; /* rdx  = hold */
+	mov	ebx, [rsp+88]      ; /* ebx  = bits */
+	mov	r12d, [rsp+100]    ; /* r12d = lmask */
+	mov	r13d, [rsp+104]    ; /* r13d = dmask */
+                                          ; /* r14d = len */
+                                          ; /* r15d = dist */
+
+
+	cld
+	cmp	r10, rdi
+	je	L_one_time           ; /* if only one decode left */
+	cmp	r9, rsi
+
+    jne L_do_loop
+
+
+L_one_time:
+	mov	r8, r12           ; /* r8 = lmask */
+	cmp	bl, 32
+	ja	L_get_length_code_one_time
+
+	lodsd                         ; /* eax = *(uint *)in++ */
+	mov	cl, bl            ; /* cl = bits, needs it for shifting */
+	add	bl, 32             ; /* bits += 32 */
+	shl	rax, cl
+	or	rdx, rax          ; /* hold |= *((uint *)in)++ << bits */
+	jmp	L_get_length_code_one_time
+
+ALIGN 4
+L_while_test:
+	cmp	r10, rdi
+	jbe	L_break_loop
+	cmp	r9, rsi
+	jbe	L_break_loop
+
+L_do_loop:
+	mov	r8, r12           ; /* r8 = lmask */
+	cmp	bl, 32
+	ja	L_get_length_code    ; /* if (32 < bits) */
+
+	lodsd                         ; /* eax = *(uint *)in++ */
+	mov	cl, bl            ; /* cl = bits, needs it for shifting */
+	add	bl, 32             ; /* bits += 32 */
+	shl	rax, cl
+	or	rdx, rax          ; /* hold |= *((uint *)in)++ << bits */
+
+L_get_length_code:
+	and	r8, rdx            ; /* r8 &= hold */
+	mov	eax, [rbp+r8*4]  ; /* eax = lcode[hold & lmask] */
+
+	mov	cl, ah            ; /* cl = this.bits */
+	sub	bl, ah            ; /* bits -= this.bits */
+	shr	rdx, cl           ; /* hold >>= this.bits */
+
+	test	al, al
+	jnz	L_test_for_length_base ; /* if (op != 0) 45.7% */
+
+	mov	r8, r12            ; /* r8 = lmask */
+	shr	eax, 16            ; /* output this.val char */
+	stosb
+
+L_get_length_code_one_time:
+	and	r8, rdx            ; /* r8 &= hold */
+	mov	eax, [rbp+r8*4] ; /* eax = lcode[hold & lmask] */
+
+L_dolen:
+	mov	cl, ah            ; /* cl = this.bits */
+	sub	bl, ah            ; /* bits -= this.bits */
+	shr	rdx, cl           ; /* hold >>= this.bits */
+
+	test	al, al
+	jnz	L_test_for_length_base ; /* if (op != 0) 45.7% */
+
+	shr	eax, 16            ; /* output this.val char */
+	stosb
+	jmp	L_while_test
+
+ALIGN 4
+L_test_for_length_base:
+	mov	r14d, eax         ; /* len = this */
+	shr	r14d, 16           ; /* len = this.val */
+	mov	cl, al
+
+	test	al, 16
+	jz	L_test_for_second_level_length ; /* if ((op & 16) == 0) 8% */
+	and	cl, 15             ; /* op &= 15 */
+	jz	L_decode_distance    ; /* if (!op) */
+
+L_add_bits_to_len:
+	sub	bl, cl
+	xor	eax, eax
+	inc	eax
+	shl	eax, cl
+	dec	eax
+	and	eax, edx          ; /* eax &= hold */
+	shr	rdx, cl
+	add	r14d, eax         ; /* len += hold & mask[op] */
+
+L_decode_distance:
+	mov	r8, r13           ; /* r8 = dmask */
+	cmp	bl, 32
+	ja	L_get_distance_code  ; /* if (32 < bits) */
+
+	lodsd                         ; /* eax = *(uint *)in++ */
+	mov	cl, bl            ; /* cl = bits, needs it for shifting */
+	add	bl, 32             ; /* bits += 32 */
+	shl	rax, cl
+	or	rdx, rax          ; /* hold |= *((uint *)in)++ << bits */
+
+L_get_distance_code:
+	and	r8, rdx           ; /* r8 &= hold */
+	mov	eax, [r11+r8*4] ; /* eax = dcode[hold & dmask] */
+
+L_dodist:
+	mov	r15d, eax         ; /* dist = this */
+	shr	r15d, 16           ; /* dist = this.val */
+	mov	cl, ah
+	sub	bl, ah            ; /* bits -= this.bits */
+	shr	rdx, cl           ; /* hold >>= this.bits */
+	mov	cl, al            ; /* cl = this.op */
+
+	test	al, 16             ; /* if ((op & 16) == 0) */
+	jz	L_test_for_second_level_dist
+	and	cl, 15             ; /* op &= 15 */
+	jz	L_check_dist_one
+
+L_add_bits_to_dist:
+	sub	bl, cl
+	xor	eax, eax
+	inc	eax
+	shl	eax, cl
+	dec	eax                 ; /* (1 << op) - 1 */
+	and	eax, edx          ; /* eax &= hold */
+	shr	rdx, cl
+	add	r15d, eax         ; /* dist += hold & ((1 << op) - 1) */
+
+L_check_window:
+	mov	r8, rsi           ; /* save in so from can use it's reg */
+	mov	rax, rdi
+	sub	rax, [rsp+40]      ; /* nbytes = out - beg */
+
+	cmp	eax, r15d
+	jb	L_clip_window        ; /* if (dist > nbytes) 4.2% */
+
+	mov	ecx, r14d         ; /* ecx = len */
+	mov	rsi, rdi
+	sub	rsi, r15          ; /* from = out - dist */
+
+	sar	ecx, 1
+	jnc	L_copy_two           ; /* if len % 2 == 0 */
+
+	rep     movsw
+	mov	al, [rsi]
+	mov	[rdi], al
+	inc	rdi
+
+	mov	rsi, r8           ; /* move in back to %rsi, toss from */
+	jmp	L_while_test
+
+L_copy_two:
+	rep     movsw
+	mov	rsi, r8           ; /* move in back to %rsi, toss from */
+	jmp	L_while_test
+
+ALIGN 4
+L_check_dist_one:
+	cmp	r15d, 1            ; /* if dist 1, is a memset */
+	jne	L_check_window
+	cmp	[rsp+40], rdi      ; /* if out == beg, outside window */
+	je	L_check_window
+
+	mov	ecx, r14d         ; /* ecx = len */
+	mov	al, [rdi-1]
+	mov	ah, al
+
+	sar	ecx, 1
+	jnc	L_set_two
+	mov	[rdi], al
+	inc	rdi
+
+L_set_two:
+	rep     stosw
+	jmp	L_while_test
+
+ALIGN 4
+L_test_for_second_level_length:
+	test	al, 64
+	jnz	L_test_for_end_of_block ; /* if ((op & 64) != 0) */
+
+	xor	eax, eax
+	inc	eax
+	shl	eax, cl
+	dec	eax
+	and	eax, edx         ; /* eax &= hold */
+	add	eax, r14d        ; /* eax += len */
+	mov	eax, [rbp+rax*4] ; /* eax = lcode[val+(hold&mask[op])]*/
+	jmp	L_dolen
+
+ALIGN 4
+L_test_for_second_level_dist:
+	test	al, 64
+	jnz	L_invalid_distance_code ; /* if ((op & 64) != 0) */
+
+	xor	eax, eax
+	inc	eax
+	shl	eax, cl
+	dec	eax
+	and	eax, edx         ; /* eax &= hold */
+	add	eax, r15d        ; /* eax += dist */
+	mov	eax, [r11+rax*4] ; /* eax = dcode[val+(hold&mask[op])]*/
+	jmp	L_dodist
+
+ALIGN 4
+L_clip_window:
+	mov	ecx, eax         ; /* ecx = nbytes */
+	mov	eax, [rsp+92]     ; /* eax = wsize, prepare for dist cmp */
+	neg	ecx                ; /* nbytes = -nbytes */
+
+	cmp	eax, r15d
+	jb	L_invalid_distance_too_far ; /* if (dist > wsize) */
+
+	add	ecx, r15d         ; /* nbytes = dist - nbytes */
+	cmp	dword ptr [rsp+96], 0
+	jne	L_wrap_around_window ; /* if (write != 0) */
+
+	mov	rsi, [rsp+56]     ; /* from  = window */
+	sub	eax, ecx         ; /* eax  -= nbytes */
+	add	rsi, rax         ; /* from += wsize - nbytes */
+
+	mov	eax, r14d        ; /* eax = len */
+	cmp	r14d, ecx
+	jbe	L_do_copy           ; /* if (nbytes >= len) */
+
+	sub	eax, ecx         ; /* eax -= nbytes */
+	rep     movsb
+	mov	rsi, rdi
+	sub	rsi, r15         ; /* from = &out[ -dist ] */
+	jmp	L_do_copy
+
+ALIGN 4
+L_wrap_around_window:
+	mov	eax, [rsp+96]     ; /* eax = write */
+	cmp	ecx, eax
+	jbe	L_contiguous_in_window ; /* if (write >= nbytes) */
+
+	mov	esi, [rsp+92]     ; /* from  = wsize */
+	add	rsi, [rsp+56]     ; /* from += window */
+	add	rsi, rax         ; /* from += write */
+	sub	rsi, rcx         ; /* from -= nbytes */
+	sub	ecx, eax         ; /* nbytes -= write */
+
+	mov	eax, r14d        ; /* eax = len */
+	cmp	eax, ecx
+	jbe	L_do_copy           ; /* if (nbytes >= len) */
+
+	sub	eax, ecx         ; /* len -= nbytes */
+	rep     movsb
+	mov	rsi, [rsp+56]     ; /* from = window */
+	mov	ecx, [rsp+96]     ; /* nbytes = write */
+	cmp	eax, ecx
+	jbe	L_do_copy           ; /* if (nbytes >= len) */
+
+	sub	eax, ecx         ; /* len -= nbytes */
+	rep     movsb
+	mov	rsi, rdi
+	sub	rsi, r15         ; /* from = out - dist */
+	jmp	L_do_copy
+
+ALIGN 4
+L_contiguous_in_window:
+	mov	rsi, [rsp+56]     ; /* rsi = window */
+	add	rsi, rax
+	sub	rsi, rcx         ; /* from += write - nbytes */
+
+	mov	eax, r14d        ; /* eax = len */
+	cmp	eax, ecx
+	jbe	L_do_copy           ; /* if (nbytes >= len) */
+
+	sub	eax, ecx         ; /* len -= nbytes */
+	rep     movsb
+	mov	rsi, rdi
+	sub	rsi, r15         ; /* from = out - dist */
+	jmp	L_do_copy           ; /* if (nbytes >= len) */
+
+ALIGN 4
+L_do_copy:
+	mov	ecx, eax         ; /* ecx = len */
+	rep     movsb
+
+	mov	rsi, r8          ; /* move in back to %esi, toss from */
+	jmp	L_while_test
+
+L_test_for_end_of_block:
+	test	al, 32
+	jz	L_invalid_literal_length_code
+	mov	dword ptr [rsp+116], 1
+	jmp	L_break_loop_with_status
+
+L_invalid_literal_length_code:
+	mov	dword ptr [rsp+116], 2
+	jmp	L_break_loop_with_status
+
+L_invalid_distance_code:
+	mov	dword ptr [rsp+116], 3
+	jmp	L_break_loop_with_status
+
+L_invalid_distance_too_far:
+	mov	dword ptr [rsp+116], 4
+	jmp	L_break_loop_with_status
+
+L_break_loop:
+	mov	dword ptr [rsp+116], 0
+
+L_break_loop_with_status:
+; /* put in, out, bits, and hold back into ar and pop esp */
+	mov	[rsp+16], rsi     ; /* in */
+	mov	[rsp+32], rdi     ; /* out */
+	mov	[rsp+88], ebx     ; /* bits */
+	mov	[rsp+80], rdx     ; /* hold */
+
+	mov	rax, [rsp]       ; /* restore rbp and rsp */
+	mov	rbp, [rsp+8]
+	mov	rsp, rax
+
+
+
+	mov rsi,[rsp-8]
+	mov rdi,[rsp-16]
+	mov r12,[rsp-24]
+	mov r13,[rsp-32]
+	mov r14,[rsp-40]
+	mov r15,[rsp-48]
+	mov rbx,[rsp-56]
+
+    ret 0
+;          :
+;          : "m" (ar)
+;          : "memory", "%rax", "%rbx", "%rcx", "%rdx", "%rsi", "%rdi",
+;            "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "%r14", "%r15"
+;    );
+
+inffas8664fnc 	ENDP
+;_TEXT	ENDS
+END

contrib/masmx64/readme.txt

@@ -0,0 +1,31 @@
+Summary
+-------
+This directory contains ASM implementations of the functions
+longest_match() and inflate_fast(), for 64 bits x86 (both AMD64 and Intel EM64t),
+for use with Microsoft Macro Assembler (x64) for AMD64 and Microsoft C++ 64 bits.
+
+gvmat64.asm is written by Gilles Vollant (2005), by using Brian Raiter 686/32 bits
+   assembly optimized version from Jean-loup Gailly original longest_match function
+
+inffasx64.asm and inffas8664.c were written by Chris Anderson, by optimizing
+   original function from Mark Adler
+
+Use instructions
+----------------
+Assemble the .asm files using MASM and put the object files into the zlib source
+directory.  You can also get object files here:
+
+     http://www.winimage.com/zLibDll/zlib124_masm_obj.zip
+
+define ASMV and ASMINF in your project. Include inffas8664.c in your source tree,
+and inffasx64.obj and gvmat64.obj as object to link.
+
+
+Build instructions
+------------------
+run bld_64.bat with Microsoft Macro Assembler (x64) for AMD64 (ml64.exe)
+
+ml64.exe is given with Visual Studio 2005, Windows 2003 server DDK
+
+You can get Windows 2003 server DDK with ml64 and cl for AMD64 from
+  http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price)

contrib/masmx86/bld_ml32.bat

@@ -0,0 +1,2 @@
+ml /coff /Zi /c /Flmatch686.lst match686.asm
+ml /coff /Zi /c /Flinffas32.lst inffas32.asm

contrib/masmx86/match686.asm

@@ -0,0 +1,479 @@
+; match686.asm -- Asm portion of the optimized longest_match for 32 bits x86
+; Copyright (C) 1995-1996 Jean-loup Gailly, Brian Raiter and Gilles Vollant.
+; File written by Gilles Vollant, by converting match686.S from Brian Raiter
+; for MASM. This is as assembly version of longest_match
+;  from Jean-loup Gailly in deflate.c
+;
+;         http://www.zlib.net
+;         http://www.winimage.com/zLibDll
+;         http://www.muppetlabs.com/~breadbox/software/assembly.html
+;
+; For Visual C++ 4.x and higher and ML 6.x and higher
+;   ml.exe is distributed in
+;  http://www.microsoft.com/downloads/details.aspx?FamilyID=7a1c9da0-0510-44a2-b042-7ef370530c64
+;
+; this file contain two implementation of longest_match
+;
+;  this longest_match was written by Brian raiter (1998), optimized for Pentium Pro
+;   (and the faster known version of match_init on modern Core 2 Duo and AMD Phenom)
+;
+;  for using an assembly version of longest_match, you need define ASMV in project
+;
+;    compile the asm file running
+;           ml /coff /Zi /c /Flmatch686.lst match686.asm
+;    and do not include match686.obj in your project
+;
+; note: contrib of zLib 1.2.3 and earlier contained both a deprecated version for
+;  Pentium (prior Pentium Pro) and this version for Pentium Pro and modern processor
+;  with autoselect (with cpu detection code)
+;  if you want support the old pentium optimization, you can still use these version
+;
+; this file is not optimized for old pentium, but it compatible with all x86 32 bits
+; processor (starting 80386)
+;
+;
+; see below : zlib1222add must be adjuster if you use a zlib version < 1.2.2.2
+
+;uInt longest_match(s, cur_match)
+;    deflate_state *s;
+;    IPos cur_match;                             /* current match */
+
+    NbStack         equ     76
+    cur_match       equ     dword ptr[esp+NbStack-0]
+    str_s           equ     dword ptr[esp+NbStack-4]
+; 5 dword on top (ret,ebp,esi,edi,ebx)
+    adrret          equ     dword ptr[esp+NbStack-8]
+    pushebp         equ     dword ptr[esp+NbStack-12]
+    pushedi         equ     dword ptr[esp+NbStack-16]
+    pushesi         equ     dword ptr[esp+NbStack-20]
+    pushebx         equ     dword ptr[esp+NbStack-24]
+
+    chain_length    equ     dword ptr [esp+NbStack-28]
+    limit           equ     dword ptr [esp+NbStack-32]
+    best_len        equ     dword ptr [esp+NbStack-36]
+    window          equ     dword ptr [esp+NbStack-40]
+    prev            equ     dword ptr [esp+NbStack-44]
+    scan_start      equ      word ptr [esp+NbStack-48]
+    wmask           equ     dword ptr [esp+NbStack-52]
+    match_start_ptr equ     dword ptr [esp+NbStack-56]
+    nice_match      equ     dword ptr [esp+NbStack-60]
+    scan            equ     dword ptr [esp+NbStack-64]
+
+    windowlen       equ     dword ptr [esp+NbStack-68]
+    match_start     equ     dword ptr [esp+NbStack-72]
+    strend          equ     dword ptr [esp+NbStack-76]
+    NbStackAdd      equ     (NbStack-24)
+
+    .386p
+
+    name    gvmatch
+    .MODEL  FLAT
+
+
+
+;  all the +zlib1222add offsets are due to the addition of fields
+;  in zlib in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+;  (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+;  if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
+
+    zlib1222add         equ     8
+
+;  Note : these value are good with a 8 bytes boundary pack structure
+    dep_chain_length    equ     74h+zlib1222add
+    dep_window          equ     30h+zlib1222add
+    dep_strstart        equ     64h+zlib1222add
+    dep_prev_length     equ     70h+zlib1222add
+    dep_nice_match      equ     88h+zlib1222add
+    dep_w_size          equ     24h+zlib1222add
+    dep_prev            equ     38h+zlib1222add
+    dep_w_mask          equ     2ch+zlib1222add
+    dep_good_match      equ     84h+zlib1222add
+    dep_match_start     equ     68h+zlib1222add
+    dep_lookahead       equ     6ch+zlib1222add
+
+
+_TEXT                   segment
+
+IFDEF NOUNDERLINE
+            public  longest_match
+            public  match_init
+ELSE
+            public  _longest_match
+            public  _match_init
+ENDIF
+
+    MAX_MATCH           equ     258
+    MIN_MATCH           equ     3
+    MIN_LOOKAHEAD       equ     (MAX_MATCH+MIN_MATCH+1)
+
+
+
+MAX_MATCH       equ     258
+MIN_MATCH       equ     3
+MIN_LOOKAHEAD   equ     (MAX_MATCH + MIN_MATCH + 1)
+MAX_MATCH_8_     equ     ((MAX_MATCH + 7) AND 0FFF0h)
+
+
+;;; stack frame offsets
+
+chainlenwmask   equ  esp + 0    ; high word: current chain len
+                    ; low word: s->wmask
+window      equ  esp + 4    ; local copy of s->window
+windowbestlen   equ  esp + 8    ; s->window + bestlen
+scanstart   equ  esp + 16   ; first two bytes of string
+scanend     equ  esp + 12   ; last two bytes of string
+scanalign   equ  esp + 20   ; dword-misalignment of string
+nicematch   equ  esp + 24   ; a good enough match size
+bestlen     equ  esp + 28   ; size of best match so far
+scan        equ  esp + 32   ; ptr to string wanting match
+
+LocalVarsSize   equ 36
+;   saved ebx   byte esp + 36
+;   saved edi   byte esp + 40
+;   saved esi   byte esp + 44
+;   saved ebp   byte esp + 48
+;   return address  byte esp + 52
+deflatestate    equ  esp + 56   ; the function arguments
+curmatch    equ  esp + 60
+
+;;; Offsets for fields in the deflate_state structure. These numbers
+;;; are calculated from the definition of deflate_state, with the
+;;; assumption that the compiler will dword-align the fields. (Thus,
+;;; changing the definition of deflate_state could easily cause this
+;;; program to crash horribly, without so much as a warning at
+;;; compile time. Sigh.)
+
+dsWSize     equ 36+zlib1222add
+dsWMask     equ 44+zlib1222add
+dsWindow    equ 48+zlib1222add
+dsPrev      equ 56+zlib1222add
+dsMatchLen  equ 88+zlib1222add
+dsPrevMatch equ 92+zlib1222add
+dsStrStart  equ 100+zlib1222add
+dsMatchStart    equ 104+zlib1222add
+dsLookahead equ 108+zlib1222add
+dsPrevLen   equ 112+zlib1222add
+dsMaxChainLen   equ 116+zlib1222add
+dsGoodMatch equ 132+zlib1222add
+dsNiceMatch equ 136+zlib1222add
+
+
+;;; match686.asm -- Pentium-Pro-optimized version of longest_match()
+;;; Written for zlib 1.1.2
+;;; Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
+;;; You can look at http://www.muppetlabs.com/~breadbox/software/assembly.html
+;;;
+;;
+;;  This software is provided 'as-is', without any express or implied
+;;  warranty.  In no event will the authors be held liable for any damages
+;;  arising from the use of this software.
+;;
+;;  Permission is granted to anyone to use this software for any purpose,
+;;  including commercial applications, and to alter it and redistribute it
+;;  freely, subject to the following restrictions:
+;;
+;;  1. The origin of this software must not be misrepresented; you must not
+;;     claim that you wrote the original software. If you use this software
+;;     in a product, an acknowledgment in the product documentation would be
+;;     appreciated but is not required.
+;;  2. Altered source versions must be plainly marked as such, and must not be
+;;     misrepresented as being the original software
+;;  3. This notice may not be removed or altered from any source distribution.
+;;
+
+;GLOBAL _longest_match, _match_init
+
+
+;SECTION    .text
+
+;;; uInt longest_match(deflate_state *deflatestate, IPos curmatch)
+
+;_longest_match:
+    IFDEF NOUNDERLINE
+    longest_match       proc near
+    ELSE
+    _longest_match      proc near
+    ENDIF
+.FPO (9, 4, 0, 0, 1, 0)
+
+;;; Save registers that the compiler may be using, and adjust esp to
+;;; make room for our stack frame.
+
+        push    ebp
+        push    edi
+        push    esi
+        push    ebx
+        sub esp, LocalVarsSize
+
+;;; Retrieve the function arguments. ecx will hold cur_match
+;;; throughout the entire function. edx will hold the pointer to the
+;;; deflate_state structure during the function's setup (before
+;;; entering the main loop.
+
+        mov edx, [deflatestate]
+        mov ecx, [curmatch]
+
+;;; uInt wmask = s->w_mask;
+;;; unsigned chain_length = s->max_chain_length;
+;;; if (s->prev_length >= s->good_match) {
+;;;     chain_length >>= 2;
+;;; }
+
+        mov eax, [edx + dsPrevLen]
+        mov ebx, [edx + dsGoodMatch]
+        cmp eax, ebx
+        mov eax, [edx + dsWMask]
+        mov ebx, [edx + dsMaxChainLen]
+        jl  LastMatchGood
+        shr ebx, 2
+LastMatchGood:
+
+;;; chainlen is decremented once beforehand so that the function can
+;;; use the sign flag instead of the zero flag for the exit test.
+;;; It is then shifted into the high word, to make room for the wmask
+;;; value, which it will always accompany.
+
+        dec ebx
+        shl ebx, 16
+        or  ebx, eax
+        mov [chainlenwmask], ebx
+
+;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+        mov eax, [edx + dsNiceMatch]
+        mov ebx, [edx + dsLookahead]
+        cmp ebx, eax
+        jl  LookaheadLess
+        mov ebx, eax
+LookaheadLess:  mov [nicematch], ebx
+
+;;; register Bytef *scan = s->window + s->strstart;
+
+        mov esi, [edx + dsWindow]
+        mov [window], esi
+        mov ebp, [edx + dsStrStart]
+        lea edi, [esi + ebp]
+        mov [scan], edi
+
+;;; Determine how many bytes the scan ptr is off from being
+;;; dword-aligned.
+
+        mov eax, edi
+        neg eax
+        and eax, 3
+        mov [scanalign], eax
+
+;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+;;;     s->strstart - (IPos)MAX_DIST(s) : NIL;
+
+        mov eax, [edx + dsWSize]
+        sub eax, MIN_LOOKAHEAD
+        sub ebp, eax
+        jg  LimitPositive
+        xor ebp, ebp
+LimitPositive:
+
+;;; int best_len = s->prev_length;
+
+        mov eax, [edx + dsPrevLen]
+        mov [bestlen], eax
+
+;;; Store the sum of s->window + best_len in esi locally, and in esi.
+
+        add esi, eax
+        mov [windowbestlen], esi
+
+;;; register ush scan_start = *(ushf*)scan;
+;;; register ush scan_end   = *(ushf*)(scan+best_len-1);
+;;; Posf *prev = s->prev;
+
+        movzx   ebx, word ptr [edi]
+        mov [scanstart], ebx
+        movzx   ebx, word ptr [edi + eax - 1]
+        mov [scanend], ebx
+        mov edi, [edx + dsPrev]
+
+;;; Jump into the main loop.
+
+        mov edx, [chainlenwmask]
+        jmp short LoopEntry
+
+align 4
+
+;;; do {
+;;;     match = s->window + cur_match;
+;;;     if (*(ushf*)(match+best_len-1) != scan_end ||
+;;;         *(ushf*)match != scan_start) continue;
+;;;     [...]
+;;; } while ((cur_match = prev[cur_match & wmask]) > limit
+;;;          && --chain_length != 0);
+;;;
+;;; Here is the inner loop of the function. The function will spend the
+;;; majority of its time in this loop, and majority of that time will
+;;; be spent in the first ten instructions.
+;;;
+;;; Within this loop:
+;;; ebx = scanend
+;;; ecx = curmatch
+;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
+;;; esi = windowbestlen - i.e., (window + bestlen)
+;;; edi = prev
+;;; ebp = limit
+
+LookupLoop:
+        and ecx, edx
+        movzx   ecx, word ptr [edi + ecx*2]
+        cmp ecx, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+LoopEntry:  movzx   eax, word ptr [esi + ecx - 1]
+        cmp eax, ebx
+        jnz LookupLoop
+        mov eax, [window]
+        movzx   eax, word ptr [eax + ecx]
+        cmp eax, [scanstart]
+        jnz LookupLoop
+
+;;; Store the current value of chainlen.
+
+        mov [chainlenwmask], edx
+
+;;; Point edi to the string under scrutiny, and esi to the string we
+;;; are hoping to match it up with. In actuality, esi and edi are
+;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is
+;;; initialized to -(MAX_MATCH_8 - scanalign).
+
+        mov esi, [window]
+        mov edi, [scan]
+        add esi, ecx
+        mov eax, [scanalign]
+        mov edx, 0fffffef8h; -(MAX_MATCH_8)
+        lea edi, [edi + eax + 0108h] ;MAX_MATCH_8]
+        lea esi, [esi + eax + 0108h] ;MAX_MATCH_8]
+
+;;; Test the strings for equality, 8 bytes at a time. At the end,
+;;; adjust edx so that it is offset to the exact byte that mismatched.
+;;;
+;;; We already know at this point that the first three bytes of the
+;;; strings match each other, and they can be safely passed over before
+;;; starting the compare loop. So what this code does is skip over 0-3
+;;; bytes, as much as necessary in order to dword-align the edi
+;;; pointer. (esi will still be misaligned three times out of four.)
+;;;
+;;; It should be confessed that this loop usually does not represent
+;;; much of the total running time. Replacing it with a more
+;;; straightforward "rep cmpsb" would not drastically degrade
+;;; performance.
+
+LoopCmps:
+        mov eax, [esi + edx]
+        xor eax, [edi + edx]
+        jnz LeaveLoopCmps
+        mov eax, [esi + edx + 4]
+        xor eax, [edi + edx + 4]
+        jnz LeaveLoopCmps4
+        add edx, 8
+        jnz LoopCmps
+        jmp short LenMaximum
+LeaveLoopCmps4: add edx, 4
+LeaveLoopCmps:  test    eax, 0000FFFFh
+        jnz LenLower
+        add edx,  2
+        shr eax, 16
+LenLower:   sub al, 1
+        adc edx, 0
+
+;;; Calculate the length of the match. If it is longer than MAX_MATCH,
+;;; then automatically accept it as the best possible match and leave.
+
+        lea eax, [edi + edx]
+        mov edi, [scan]
+        sub eax, edi
+        cmp eax, MAX_MATCH
+        jge LenMaximum
+
+;;; If the length of the match is not longer than the best match we
+;;; have so far, then forget it and return to the lookup loop.
+
+        mov edx, [deflatestate]
+        mov ebx, [bestlen]
+        cmp eax, ebx
+        jg  LongerMatch
+        mov esi, [windowbestlen]
+        mov edi, [edx + dsPrev]
+        mov ebx, [scanend]
+        mov edx, [chainlenwmask]
+        jmp LookupLoop
+
+;;;         s->match_start = cur_match;
+;;;         best_len = len;
+;;;         if (len >= nice_match) break;
+;;;         scan_end = *(ushf*)(scan+best_len-1);
+
+LongerMatch:    mov ebx, [nicematch]
+        mov [bestlen], eax
+        mov [edx + dsMatchStart], ecx
+        cmp eax, ebx
+        jge LeaveNow
+        mov esi, [window]
+        add esi, eax
+        mov [windowbestlen], esi
+        movzx   ebx, word ptr [edi + eax - 1]
+        mov edi, [edx + dsPrev]
+        mov [scanend], ebx
+        mov edx, [chainlenwmask]
+        jmp LookupLoop
+
+;;; Accept the current string, with the maximum possible length.
+
+LenMaximum: mov edx, [deflatestate]
+        mov dword ptr [bestlen], MAX_MATCH
+        mov [edx + dsMatchStart], ecx
+
+;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+;;; return s->lookahead;
+
+LeaveNow:
+        mov edx, [deflatestate]
+        mov ebx, [bestlen]
+        mov eax, [edx + dsLookahead]
+        cmp ebx, eax
+        jg  LookaheadRet
+        mov eax, ebx
+LookaheadRet:
+
+;;; Restore the stack and return from whence we came.
+
+        add esp, LocalVarsSize
+        pop ebx
+        pop esi
+        pop edi
+        pop ebp
+
+        ret
+; please don't remove this string !
+; Your can freely use match686 in any free or commercial app if you don't remove the string in the binary!
+    db     0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998",0dh,0ah
+
+
+    IFDEF NOUNDERLINE
+    longest_match       endp
+    ELSE
+    _longest_match      endp
+    ENDIF
+
+    IFDEF NOUNDERLINE
+    match_init      proc near
+                    ret
+    match_init      endp
+    ELSE
+    _match_init     proc near
+                    ret
+    _match_init     endp
+    ENDIF
+
+
+_TEXT   ends
+end

contrib/masmx86/readme.txt

@@ -0,0 +1,27 @@
+
+Summary
+-------
+This directory contains ASM implementations of the functions
+longest_match() and inflate_fast().
+
+
+Use instructions
+----------------
+Assemble using MASM, and copy the object files into the zlib source
+directory, then run the appropriate makefile, as suggested below.  You can
+donwload MASM from here:
+
+    http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=7a1c9da0-0510-44a2-b042-7ef370530c64
+
+You can also get objects files here:
+
+    http://www.winimage.com/zLibDll/zlib124_masm_obj.zip
+
+Build instructions
+------------------
+* With Microsoft C and MASM:
+nmake -f win32/Makefile.msc LOC="-DASMV -DASMINF" OBJA="match686.obj inffas32.obj"
+
+* With Borland C and TASM:
+make -f win32/Makefile.bor LOCAL_ZLIB="-DASMV -DASMINF" OBJA="match686.obj inffas32.obj" OBJPA="+match686c.obj+match686.obj+inffas32.obj"
+

contrib/minizip/ChangeLogUnzip

@@ -1,51 +0,0 @@
-Change in 0.22: (19 May 03)
-- crypting support (unless you define NOCRYPT)
-- append file in existing zipfile
-
-Change in 0.21: (10 Mar 03)
-- bug fixes
-
-Change in 0.17: (27 Jan 02)
-- bug fixes
-
-Change in 0.16: (19 Jan 02)
-- Support of ioapi for virtualize zip file access
-
-Change in 0.15: (19 Mar 98)
-- fix memory leak in minizip.c
-
-Change in 0.14: (10 Mar 98)
-- fix bugs in minizip.c sample for zipping big file
-- fix problem in month in date handling
-- fix bug in unzlocal_GetCurrentFileInfoInternal in unzip.c for 
-    comment handling
-
-Change in 0.13: (6 Mar 98)
-- fix bugs in zip.c
-- add real minizip sample
-
-Change in 0.12: (4 Mar 98)
-- add zip.c and zip.h for creates .zip file
-- fix change_file_date in miniunz.c for Unix (Jean-loup Gailly)
-- fix miniunz.c for file without specific record for directory
-
-Change in 0.11: (3 Mar 98)
-- fix bug in unzGetCurrentFileInfo for get extra field and comment
-- enhance miniunz sample, remove the bad unztst.c sample
-
-Change in 0.10: (2 Mar 98)
-- fix bug in unzReadCurrentFile
-- rename unzip* to unz* function and structure
-- remove Windows-like hungary notation variable name
-- modify some structure in unzip.h
-- add somes comment in source
-- remove unzipGetcCurrentFile function
-- replace ZUNZEXPORT by ZEXPORT
-- add unzGetLocalExtrafield for get the local extrafield info
-- add a new sample, miniunz.c
-
-Change in 0.4: (25 Feb 98)
-- suppress the type unzipFileInZip. 
-  Only on file in the zipfile can be open at the same time
-- fix somes typo in code
-- added tm_unz structure in unzip_file_info (date/time in readable format)

contrib/minizip/Makefile.am

@@ -0,0 +1,45 @@
+lib_LTLIBRARIES = libminizip.la
+
+if COND_DEMOS
+bin_PROGRAMS = miniunzip minizip
+endif
+
+zlib_top_srcdir = $(top_srcdir)/../..
+zlib_top_builddir = $(top_builddir)/../..
+
+AM_CPPFLAGS = -I$(zlib_top_srcdir)
+AM_LDFLAGS = -L$(zlib_top_builddir)
+
+if WIN32
+iowin32_src = iowin32.c
+iowin32_h = iowin32.h
+endif
+
+libminizip_la_SOURCES = \
+	ioapi.c \
+	mztools.c \
+	unzip.c \
+	zip.c \
+	${iowin32_src}
+
+libminizip_la_LDFLAGS = $(AM_LDFLAGS) -version-info 1:0:0 -lz
+
+minizip_includedir = $(includedir)/minizip
+minizip_include_HEADERS = \
+	crypt.h \
+	ioapi.h \
+	mztools.h \
+	unzip.h \
+	zip.h \
+	${iowin32_h}
+
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = minizip.pc
+
+EXTRA_PROGRAMS = miniunzip minizip
+
+miniunzip_SOURCES = miniunz.c
+miniunzip_LDADD = libminizip.la
+
+minizip_SOURCES = minizip.c
+minizip_LDADD = libminizip.la -lz

contrib/minizip/MiniZip64_Changes.txt

@@ -0,0 +1,6 @@
+
+MiniZip 1.1 was derrived from MiniZip at version 1.01f
+
+Change in 1.0 (Okt 2009)
+ - **TODO - Add history**
+

contrib/minizip/MiniZip64_info.txt

@@ -0,0 +1,74 @@
+MiniZip - Copyright (c) 1998-2010 - by Gilles Vollant - version 1.1 64 bits from Mathias Svensson
+
+Introduction
+---------------------
+MiniZip 1.1 is built from MiniZip 1.0 by Gilles Vollant ( http://www.winimage.com/zLibDll/minizip.html )
+
+When adding ZIP64 support into minizip it would result into risk of breaking compatibility with minizip 1.0.
+All possible work was done for compatibility.
+
+
+Background
+---------------------
+When adding ZIP64 support Mathias Svensson found that Even Rouault have added ZIP64 
+support for unzip.c into minizip for a open source project called gdal ( http://www.gdal.org/ )
+
+That was used as a starting point. And after that ZIP64 support was added to zip.c
+some refactoring and code cleanup was also done.
+
+
+Changed from MiniZip 1.0 to MiniZip 1.1
+---------------------------------------
+* Added ZIP64 support for unzip ( by Even Rouault )
+* Added ZIP64 support for zip ( by Mathias Svensson )
+* Reverted some changed that Even Rouault did.
+* Bunch of patches received from Gulles Vollant that he received for MiniZip from various users.
+* Added unzip patch for BZIP Compression method (patch create by Daniel Borca)
+* Added BZIP Compress method for zip
+* Did some refactoring and code cleanup
+
+
+Credits
+
+ Gilles Vollant    - Original MiniZip author
+ Even Rouault      - ZIP64 unzip Support
+ Daniel Borca      - BZip Compression method support in unzip
+ Mathias Svensson  - ZIP64 zip support
+ Mathias Svensson  - BZip Compression method support in zip
+
+ Resources
+
+ ZipLayout   http://result42.com/projects/ZipFileLayout
+             Command line tool for Windows that shows the layout and information of the headers in a zip archive.
+             Used when debugging and validating the creation of zip files using MiniZip64
+
+
+ ZIP App Note  http://www.pkware.com/documents/casestudies/APPNOTE.TXT
+               Zip File specification
+
+
+Notes.
+ * To be able to use BZip compression method in zip64.c or unzip64.c the BZIP2 lib is needed and HAVE_BZIP2 need to be defined.
+
+License
+----------------------------------------------------------
+   Condition of use and distribution are the same than zlib :
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+----------------------------------------------------------
+

contrib/minizip/configure.ac

@@ -0,0 +1,32 @@
+#                                               -*- Autoconf -*-
+# Process this file with autoconf to produce a configure script.
+
+AC_INIT([minizip], [1.2.7.1], [bugzilla.redhat.com])
+AC_CONFIG_SRCDIR([minizip.c])
+AM_INIT_AUTOMAKE([foreign])
+LT_INIT
+
+AC_MSG_CHECKING([whether to build example programs])
+AC_ARG_ENABLE([demos], AC_HELP_STRING([--enable-demos], [build example programs]))
+AM_CONDITIONAL([COND_DEMOS], [test "$enable_demos" = yes])
+if test "$enable_demos" = yes
+then
+	AC_MSG_RESULT([yes])
+else
+	AC_MSG_RESULT([no])
+fi
+
+case "${host}" in
+	*-mingw* | mingw*)
+		WIN32="yes"
+		;;
+	*)
+		;;
+esac
+AM_CONDITIONAL([WIN32], [test "${WIN32}" = "yes"])
+
+
+AC_SUBST([HAVE_UNISTD_H], [0])
+AC_CHECK_HEADER([unistd.h], [HAVE_UNISTD_H=1], [])
+AC_CONFIG_FILES([Makefile minizip.pc])
+AC_OUTPUT

contrib/minizip/crypt.h

@@ -1,10 +1,38 @@
+/* crypt.h -- base code for crypt/uncrypt ZIPfile
+
+
+   Version 1.01e, February 12th, 2005
+
+   Copyright (C) 1998-2005 Gilles Vollant
+
+   This code is a modified version of crypting code in Infozip distribution
+
+   The encryption/decryption parts of this source code (as opposed to the
+   non-echoing password parts) were originally written in Europe.  The
+   whole source package can be freely distributed, including from the USA.
+   (Prior to January 2000, re-export from the US was a violation of US law.)
+
+   This encryption code is a direct transcription of the algorithm from
+   Roger Schlafly, described by Phil Katz in the file appnote.txt.  This
+   file (appnote.txt) is distributed with the PKZIP program (even in the
+   version without encryption capabilities).
+
+   If you don't need crypting in your application, just define symbols
+   NOCRYPT and NOUNCRYPT.
+
+   This code support the "Traditional PKWARE Encryption".
+
+   The new AES encryption added on Zip format by Winzip (see the page
+   http://www.winzip.com/aes_info.htm ) and PKWare PKZip 5.x Strong
+   Encryption is not supported.
+*/
 
 #define CRC32(c, b) ((*(pcrc_32_tab+(((int)(c) ^ (b)) & 0xff))) ^ ((c) >> 8))
 
 /***********************************************************************
  * Return the next byte in the pseudo-random sequence
  */
-static int decrypt_byte(unsigned long* pkeys, const unsigned long* pcrc_32_tab)
+static int decrypt_byte(unsigned long* pkeys, const z_crc_t* pcrc_32_tab)
 {
     unsigned temp;  /* POTENTIAL BUG:  temp*(temp^1) may overflow in an
                      * unpredictable manner on 16-bit systems; not a problem
@@ -17,7 +45,7 @@ static int decrypt_byte(unsigned long* pkeys, const unsigned long* pcrc_32_tab)
 /***********************************************************************
  * Update the encryption keys with the next byte of plain text
  */
-static int update_keys(unsigned long* pkeys,const unsigned long* pcrc_32_tab,int c)
+static int update_keys(unsigned long* pkeys,const z_crc_t* pcrc_32_tab,int c)
 {
     (*(pkeys+0)) = CRC32((*(pkeys+0)), c);
     (*(pkeys+1)) += (*(pkeys+0)) & 0xff;
@@ -34,7 +62,7 @@ static int update_keys(unsigned long* pkeys,const unsigned long* pcrc_32_tab,int
  * Initialize the encryption keys and the random header according to
  * the given password.
  */
-static void init_keys(const char* passwd,unsigned long* pkeys,const unsigned long* pcrc_32_tab)
+static void init_keys(const char* passwd,unsigned long* pkeys,const z_crc_t* pcrc_32_tab)
 {
     *(pkeys+0) = 305419896L;
     *(pkeys+1) = 591751049L;
@@ -56,16 +84,15 @@ static void init_keys(const char* passwd,unsigned long* pkeys,const unsigned lon
 #define RAND_HEAD_LEN  12
    /* "last resort" source for second part of crypt seed pattern */
 #  ifndef ZCR_SEED2
-#    define ZCR_SEED2 (unsigned long)3141592654L     /* use PI as default pattern */
+#    define ZCR_SEED2 3141592654UL     /* use PI as default pattern */
 #  endif
 
-static int crypthead(passwd, buf, bufSize, pkeys, pcrc_32_tab, crcForCrypting)
-    const char *passwd;         /* password string */
-    unsigned char *buf;         /* where to write header */
-    int bufSize;
-    unsigned long* pkeys;
-    const unsigned long* pcrc_32_tab;
-    unsigned long crcForCrypting;
+static int crypthead(const char* passwd,      /* password string */
+                     unsigned char* buf,      /* where to write header */
+                     int bufSize,
+                     unsigned long* pkeys,
+                     const z_crc_t* pcrc_32_tab,
+                     unsigned long crcForCrypting)
 {
     int n;                       /* index in random header */
     int t;                       /* temporary */
@@ -96,8 +123,8 @@ static int crypthead(passwd, buf, bufSize, pkeys, pcrc_32_tab, crcForCrypting)
     {
         buf[n] = (unsigned char)zencode(pkeys, pcrc_32_tab, header[n], t);
     }
-    buf[n++] = zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 16) & 0xff, t);
-    buf[n++] = zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 24) & 0xff, t);
+    buf[n++] = (unsigned char)zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 16) & 0xff, t);
+    buf[n++] = (unsigned char)zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 24) & 0xff, t);
     return n;
 }
 

contrib/minizip/ioapi.c

@@ -1,74 +1,98 @@
-/* ioapi.c -- IO base function header for compress/uncompress .zip
-   files using zlib + zip or unzip API
+/* ioapi.h -- IO base function header for compress/uncompress .zip
+   part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
 
-   Version 0.22, May 19th, 2003
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+         Modifications for Zip64 support
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+
+         For more info read MiniZip_info.txt
 
-   Copyright (C) 1998-2003 Gilles Vollant
 */
 
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
+#if defined(_WIN32) && (!(defined(_CRT_SECURE_NO_WARNINGS)))
+        #define _CRT_SECURE_NO_WARNINGS
+#endif
+
+#if defined(__APPLE__) || defined(IOAPI_NO_64)
+// In darwin and perhaps other BSD variants off_t is a 64 bit value, hence no need for specific 64 bit functions
+#define FOPEN_FUNC(filename, mode) fopen(filename, mode)
+#define FTELLO_FUNC(stream) ftello(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko(stream, offset, origin)
+#else
+#define FOPEN_FUNC(filename, mode) fopen64(filename, mode)
+#define FTELLO_FUNC(stream) ftello64(stream)
+#define FSEEKO_FUNC(stream, offset, origin) fseeko64(stream, offset, origin)
+#endif
+
 
-#include "zlib.h"
 #include "ioapi.h"
 
+voidpf call_zopen64 (const zlib_filefunc64_32_def* pfilefunc,const void*filename,int mode)
+{
+    if (pfilefunc->zfile_func64.zopen64_file != NULL)
+        return (*(pfilefunc->zfile_func64.zopen64_file)) (pfilefunc->zfile_func64.opaque,filename,mode);
+    else
+    {
+        return (*(pfilefunc->zopen32_file))(pfilefunc->zfile_func64.opaque,(const char*)filename,mode);
+    }
+}
+
+long call_zseek64 (const zlib_filefunc64_32_def* pfilefunc,voidpf filestream, ZPOS64_T offset, int origin)
+{
+    if (pfilefunc->zfile_func64.zseek64_file != NULL)
+        return (*(pfilefunc->zfile_func64.zseek64_file)) (pfilefunc->zfile_func64.opaque,filestream,offset,origin);
+    else
+    {
+        uLong offsetTruncated = (uLong)offset;
+        if (offsetTruncated != offset)
+            return -1;
+        else
+            return (*(pfilefunc->zseek32_file))(pfilefunc->zfile_func64.opaque,filestream,offsetTruncated,origin);
+    }
+}
+
+ZPOS64_T call_ztell64 (const zlib_filefunc64_32_def* pfilefunc,voidpf filestream)
+{
+    if (pfilefunc->zfile_func64.zseek64_file != NULL)
+        return (*(pfilefunc->zfile_func64.ztell64_file)) (pfilefunc->zfile_func64.opaque,filestream);
+    else
+    {
+        uLong tell_uLong = (*(pfilefunc->ztell32_file))(pfilefunc->zfile_func64.opaque,filestream);
+        if ((tell_uLong) == MAXU32)
+            return (ZPOS64_T)-1;
+        else
+            return tell_uLong;
+    }
+}
+
+void fill_zlib_filefunc64_32_def_from_filefunc32(zlib_filefunc64_32_def* p_filefunc64_32,const zlib_filefunc_def* p_filefunc32)
+{
+    p_filefunc64_32->zfile_func64.zopen64_file = NULL;
+    p_filefunc64_32->zopen32_file = p_filefunc32->zopen_file;
+    p_filefunc64_32->zfile_func64.zerror_file = p_filefunc32->zerror_file;
+    p_filefunc64_32->zfile_func64.zread_file = p_filefunc32->zread_file;
+    p_filefunc64_32->zfile_func64.zwrite_file = p_filefunc32->zwrite_file;
+    p_filefunc64_32->zfile_func64.ztell64_file = NULL;
+    p_filefunc64_32->zfile_func64.zseek64_file = NULL;
+    p_filefunc64_32->zfile_func64.zclose_file = p_filefunc32->zclose_file;
+    p_filefunc64_32->zfile_func64.zerror_file = p_filefunc32->zerror_file;
+    p_filefunc64_32->zfile_func64.opaque = p_filefunc32->opaque;
+    p_filefunc64_32->zseek32_file = p_filefunc32->zseek_file;
+    p_filefunc64_32->ztell32_file = p_filefunc32->ztell_file;
+}
 
 
-/* I've found an old Unix (a SunOS 4.1.3_U1) without all SEEK_* defined.... */
 
-#ifndef SEEK_CUR
-#define SEEK_CUR    1
-#endif
+static voidpf  ZCALLBACK fopen_file_func OF((voidpf opaque, const char* filename, int mode));
+static uLong   ZCALLBACK fread_file_func OF((voidpf opaque, voidpf stream, void* buf, uLong size));
+static uLong   ZCALLBACK fwrite_file_func OF((voidpf opaque, voidpf stream, const void* buf,uLong size));
+static ZPOS64_T ZCALLBACK ftell64_file_func OF((voidpf opaque, voidpf stream));
+static long    ZCALLBACK fseek64_file_func OF((voidpf opaque, voidpf stream, ZPOS64_T offset, int origin));
+static int     ZCALLBACK fclose_file_func OF((voidpf opaque, voidpf stream));
+static int     ZCALLBACK ferror_file_func OF((voidpf opaque, voidpf stream));
 
-#ifndef SEEK_END
-#define SEEK_END    2
-#endif
-
-#ifndef SEEK_SET
-#define SEEK_SET    0
-#endif
-
-voidpf ZCALLBACK fopen_file_func OF((
-   voidpf opaque,
-   const char* filename,
-   int mode));
-
-uLong ZCALLBACK fread_file_func OF((
-   voidpf opaque,
-   voidpf stream,
-   void* buf,
-   uLong size));
-
-uLong ZCALLBACK fwrite_file_func OF((
-   voidpf opaque,
-   voidpf stream,
-   const void* buf,
-   uLong size));
-
-long ZCALLBACK ftell_file_func OF((
-   voidpf opaque,
-   voidpf stream));
-
-long ZCALLBACK fseek_file_func OF((
-   voidpf opaque,
-   voidpf stream,
-   uLong offset,
-   int origin));
-
-int ZCALLBACK fclose_file_func OF((
-   voidpf opaque,
-   voidpf stream));
-
-int ZCALLBACK ferror_file_func OF((
-   voidpf opaque,
-   voidpf stream));
-
-
-voidpf ZCALLBACK fopen_file_func (opaque, filename, mode)
-   voidpf opaque;
-   const char* filename;
-   int mode;
+static voidpf ZCALLBACK fopen_file_func (voidpf opaque, const char* filename, int mode)
 {
     FILE* file = NULL;
     const char* mode_fopen = NULL;
@@ -86,44 +110,55 @@ voidpf ZCALLBACK fopen_file_func (opaque, filename, mode)
     return file;
 }
 
-
-uLong ZCALLBACK fread_file_func (opaque, stream, buf, size)
-   voidpf opaque;
-   voidpf stream;
-   void* buf;
-   uLong size;
+static voidpf ZCALLBACK fopen64_file_func (voidpf opaque, const void* filename, int mode)
 {
-    uLong ret;
-    ret = fread(buf, 1, (size_t)size, (FILE *)stream);
-    return ret;
+    FILE* file = NULL;
+    const char* mode_fopen = NULL;
+    if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ)
+        mode_fopen = "rb";
+    else
+    if (mode & ZLIB_FILEFUNC_MODE_EXISTING)
+        mode_fopen = "r+b";
+    else
+    if (mode & ZLIB_FILEFUNC_MODE_CREATE)
+        mode_fopen = "wb";
+
+    if ((filename!=NULL) && (mode_fopen != NULL))
+        file = FOPEN_FUNC((const char*)filename, mode_fopen);
+    return file;
 }
 
 
-uLong ZCALLBACK fwrite_file_func (opaque, stream, buf, size)
-   voidpf opaque;
-   voidpf stream;
-   const void* buf;
-   uLong size;
+static uLong ZCALLBACK fread_file_func (voidpf opaque, voidpf stream, void* buf, uLong size)
 {
     uLong ret;
-    ret = fwrite(buf, 1, (size_t)size, (FILE *)stream);
+    ret = (uLong)fread(buf, 1, (size_t)size, (FILE *)stream);
     return ret;
 }
 
-long ZCALLBACK ftell_file_func (opaque, stream)
-   voidpf opaque;
-   voidpf stream;
+static uLong ZCALLBACK fwrite_file_func (voidpf opaque, voidpf stream, const void* buf, uLong size)
+{
+    uLong ret;
+    ret = (uLong)fwrite(buf, 1, (size_t)size, (FILE *)stream);
+    return ret;
+}
+
+static long ZCALLBACK ftell_file_func (voidpf opaque, voidpf stream)
 {
     long ret;
     ret = ftell((FILE *)stream);
     return ret;
 }
 
-long ZCALLBACK fseek_file_func (opaque, stream, offset, origin)
-   voidpf opaque;
-   voidpf stream;
-   uLong offset;
-   int origin;
+
+static ZPOS64_T ZCALLBACK ftell64_file_func (voidpf opaque, voidpf stream)
+{
+    ZPOS64_T ret;
+    ret = FTELLO_FUNC((FILE *)stream);
+    return ret;
+}
+
+static long ZCALLBACK fseek_file_func (voidpf  opaque, voidpf stream, uLong offset, int origin)
 {
     int fseek_origin=0;
     long ret;
@@ -141,22 +176,45 @@ long ZCALLBACK fseek_file_func (opaque, stream, offset, origin)
     default: return -1;
     }
     ret = 0;
-    fseek((FILE *)stream, offset, fseek_origin);
+    if (fseek((FILE *)stream, offset, fseek_origin) != 0)
+        ret = -1;
     return ret;
 }
 
-int ZCALLBACK fclose_file_func (opaque, stream)
-   voidpf opaque;
-   voidpf stream;
+static long ZCALLBACK fseek64_file_func (voidpf  opaque, voidpf stream, ZPOS64_T offset, int origin)
+{
+    int fseek_origin=0;
+    long ret;
+    switch (origin)
+    {
+    case ZLIB_FILEFUNC_SEEK_CUR :
+        fseek_origin = SEEK_CUR;
+        break;
+    case ZLIB_FILEFUNC_SEEK_END :
+        fseek_origin = SEEK_END;
+        break;
+    case ZLIB_FILEFUNC_SEEK_SET :
+        fseek_origin = SEEK_SET;
+        break;
+    default: return -1;
+    }
+    ret = 0;
+
+    if(FSEEKO_FUNC((FILE *)stream, offset, fseek_origin) != 0)
+                        ret = -1;
+
+    return ret;
+}
+
+
+static int ZCALLBACK fclose_file_func (voidpf opaque, voidpf stream)
 {
     int ret;
     ret = fclose((FILE *)stream);
     return ret;
 }
 
-int ZCALLBACK ferror_file_func (opaque, stream)
-   voidpf opaque;
-   voidpf stream;
+static int ZCALLBACK ferror_file_func (voidpf opaque, voidpf stream)
 {
     int ret;
     ret = ferror((FILE *)stream);
@@ -175,3 +233,15 @@ void fill_fopen_filefunc (pzlib_filefunc_def)
     pzlib_filefunc_def->zerror_file = ferror_file_func;
     pzlib_filefunc_def->opaque = NULL;
 }
+
+void fill_fopen64_filefunc (zlib_filefunc64_def*  pzlib_filefunc_def)
+{
+    pzlib_filefunc_def->zopen64_file = fopen64_file_func;
+    pzlib_filefunc_def->zread_file = fread_file_func;
+    pzlib_filefunc_def->zwrite_file = fwrite_file_func;
+    pzlib_filefunc_def->ztell64_file = ftell64_file_func;
+    pzlib_filefunc_def->zseek64_file = fseek64_file_func;
+    pzlib_filefunc_def->zclose_file = fclose_file_func;
+    pzlib_filefunc_def->zerror_file = ferror_file_func;
+    pzlib_filefunc_def->opaque = NULL;
+}