zlib 1.1.3

ChangeLog

@@ -1,6 +1,92 @@
 
 		ChangeLog file for zlib
 
+Changes in 1.1.3 (9 July 1998)
+- fix "an inflate input buffer bug that shows up on rare but persistent
+  occasions" (Mark)
+- fix gzread and gztell for concatenated .gz files (Didier Le Botlan)
+- fix gzseek(..., SEEK_SET) in write mode
+- fix crc check after a gzeek (Frank Faubert)
+- fix miniunzip when the last entry in a zip file is itself a zip file
+  (J Lillge)
+- add contrib/asm586 and contrib/asm686 (Brian Raiter)
+  See http://www.muppetlabs.com/~breadbox/software/assembly.html
+- add support for Delphi 3 in contrib/delphi (Bob Dellaca)
+- add support for C++Builder 3 and Delphi 3 in contrib/delphi2 (Davide Moretti)
+- do not exit prematurely in untgz if 0 at start of block (Magnus Holmgren)
+- use macro EXTERN instead of extern to support DLL for BeOS (Sander Stoks)
+- added a FAQ file
+
+- Support gzdopen on Mac with Metrowerks (Jason Linhart)
+- Do not redefine Byte on Mac (Brad Pettit & Jason Linhart)
+- define SEEK_END too if SEEK_SET is not defined (Albert Chin-A-Young)
+- avoid some warnings with Borland C (Tom Tanner)
+- fix a problem in contrib/minizip/zip.c for 16-bit MSDOS (Gilles Vollant)
+- emulate utime() for WIN32 in contrib/untgz  (Gilles Vollant)
+- allow several arguments to configure (Tim Mooney, Frodo Looijaard)
+- use libdir and includedir in Makefile.in (Tim Mooney)
+- support shared libraries on OSF1 V4 (Tim Mooney)
+- remove so_locations in "make clean"  (Tim Mooney)
+- fix maketree.c compilation error (Glenn, Mark)
+- Python interface to zlib now in Python 1.5 (Jeremy Hylton)
+- new Makefile.riscos (Rich Walker)
+- initialize static descriptors in trees.c for embedded targets (Nick Smith)
+- use "foo-gz" in example.c for RISCOS and VMS (Nick Smith)
+- add the OS/2 files in Makefile.in too (Andrew Zabolotny)
+- fix fdopen and halloc macros for Microsoft C 6.0 (Tom Lane)
+- fix maketree.c to allow clean compilation of inffixed.h (Mark)
+- fix parameter check in deflateCopy (Gunther Nikl)
+- cleanup trees.c, use compressed_len only in debug mode (Christian Spieler)
+- Many portability patches by Christian Spieler:
+  . zutil.c, zutil.h: added "const" for zmem*
+  . Make_vms.com: fixed some typos
+  . Make_vms.com: msdos/Makefile.*: removed zutil.h from some dependency lists
+  . msdos/Makefile.msc: remove "default rtl link library" info from obj files
+  . msdos/Makefile.*: use model-dependent name for the built zlib library
+  . msdos/Makefile.emx, nt/Makefile.emx, nt/Makefile.gcc:
+     new makefiles, for emx (DOS/OS2), emx&rsxnt and mingw32 (Windows 9x / NT)
+- use define instead of typedef for Bytef also for MSC small/medium (Tom Lane)
+- replace __far with _far for better portability (Christian Spieler, Tom Lane)
+- fix test for errno.h in configure (Tim Newsham)
+
+Changes in 1.1.2 (19 March 98)
+- added contrib/minzip, mini zip and unzip based on zlib (Gilles Vollant)
+  See http://www.winimage.com/zLibDll/unzip.html
+- preinitialize the inflate tables for fixed codes, to make the code
+  completely thread safe (Mark)
+- some simplifications and slight speed-up to the inflate code (Mark)
+- fix gzeof on non-compressed files (Allan Schrum)
+- add -std1 option in configure for OSF1 to fix gzprintf (Martin Mokrejs)
+- use default value of 4K for Z_BUFSIZE for 16-bit MSDOS (Tim Wegner + Glenn)
+- added os2/Makefile.def and os2/zlib.def (Andrew Zabolotny)
+- add shared lib support for UNIX_SV4.2MP (MATSUURA Takanori)
+- do not wrap extern "C" around system includes (Tom Lane)
+- mention zlib binding for TCL in README (Andreas Kupries)
+- added amiga/Makefile.pup for Amiga powerUP SAS/C PPC (Andreas Kleinert)
+- allow "make install prefix=..." even after configure (Glenn Randers-Pehrson)
+- allow "configure --prefix $HOME" (Tim Mooney)
+- remove warnings in example.c and gzio.c (Glenn Randers-Pehrson)
+- move Makefile.sas to amiga/Makefile.sas
+
+Changes in 1.1.1 (27 Feb 98)
+- fix macros _tr_tally_* in deflate.h for debug mode  (Glenn Randers-Pehrson)
+- remove block truncation heuristic which had very marginal effect for zlib
+  (smaller lit_bufsize than in gzip 1.2.4) and degraded a little the
+  compression ratio on some files. This also allows inlining _tr_tally for
+  matches in deflate_slow.
+- added msdos/Makefile.w32 for WIN32 Microsoft Visual C++ (Bob Frazier)
+
+Changes in 1.1.0 (24 Feb 98)
+- do not return STREAM_END prematurely in inflate (John Bowler)
+- revert to the zlib 1.0.8 inflate to avoid the gcc 2.8.0 bug (Jeremy Buhler)
+- compile with -DFASTEST to get compression code optimized for speed only
+- in minigzip, try mmap'ing the input file first (Miguel Albrecht)
+- increase size of I/O buffers in minigzip.c and gzio.c (not a big gain
+  on Sun but significant on HP)
+
+- add a pointer to experimental unzip library in README (Gilles Vollant)
+- initialize variable gcc in configure (Chris Herborth)
+
 Changes in 1.0.9 (17 Feb 1998)
 - added gzputs and gzgets functions
 - do not clear eof flag in gzseek (Mark Diekhans)
@@ -119,7 +205,7 @@ Changes in 1.0.6 (19 Jan 1998)
 - allow compilation with ANSI keywords only enabled for TurboC in large model
 - avoid "versionString"[0] (Borland bug)
 - add NEED_DUMMY_RETURN for Borland
-- use variable z_verbose for tracing in debug mode (Peter Deutsch).
+- use variable z_verbose for tracing in debug mode (L. Peter Deutsch).
 - allow compilation with CC
 - defined STDC for OS/2 (David Charlap)	
 - limit external names to 8 chars for MVS (Thomas Lund)

FAQ

@@ -0,0 +1,72 @@
+
+		Frequently Asked Questions about zlib
+
+
+If your question is not there, please check the zlib home page 
+http://www.cdrom.com/pub/infozip/zlib/ which may have more recent information.
+
+
+1) I need a Windows DLL
+2) I need a Visual Basic interface to zlib
+3) compress() returns Z_BUF_ERROR
+4) deflate or inflate returns Z_BUF_ERROR
+5) Where is the zlib documentation (man pages, etc...)?
+6) Why don't you use GNU autoconf, libtool, etc...?
+7) There is a bug in zlib.
+8) I get "undefined reference to gzputc"
+
+
+
+1) I need a Windows DLL
+
+  The zlib sources can be compiled without change to produce a DLL.
+  If you want a precompiled DLL, see http://www.winimage.com/zLibDll
+
+
+2) I need a Visual Basic interface to zlib
+
+  See http://www.tcfb.com/dowseware/cmp-z-it.zip
+      http://web2.airmail.net/markn/articles/zlibtool/zlibtool.htm
+  and contrib/visual-basic.txt
+
+3) compress() returns Z_BUF_ERROR
+
+  Make sure that before the call of compress, the length of the
+  compressed buffer is equal to the total size of the compressed buffer
+  and not zero.  For Visual Basic, check that this parameter is passed
+  by reference ("as any"), not by value ("as long").
+
+
+4) deflate or inflate returns Z_BUF_ERROR
+
+  Make sure that before the call avail_in and avail_out are not zero.
+
+
+5) Where is the zlib documentation (man pages, etc...)?
+
+  It's in zlib.h for the moment. Volunteers to transform this
+  to man pages, please contact jloup@gzip.org. Examples of zlib usage
+  are in the files example.c and minigzip.c.
+
+
+6) Why don't you use GNU autoconf, libtool, etc...?
+
+  Because we would like to keep zlib as a very small and simple package.
+  zlib is rather portable and doesn't need much configuration.
+
+
+7) There is a bug in zlib.
+
+  Most of the time, such problems are due to an incorrect usage
+  of zlib. Please try to reproduce the problem with a small
+  program and send us the corresponding source at zlib@quest.jpl.nasa.gov
+  Do not send multi-megabyte data files without prior agreement.
+
+
+8) I get "undefined reference to gzputc"
+
+  If "make test" produces something like
+     example.o(.text+0x174): 
+  check that you don't have old files libz.* in /usr/lib, /usr/local/lib
+  or /usr/X11R6/lib. Remove old versions then do "make install".
+

INDEX

@@ -1,11 +1,10 @@
 ChangeLog		history of changes
 INDEX			this file
+FAQ			Frequently Asked Questions about zlib
 Make_vms.com		script for Vax/VMS
 Makefile		makefile for Unix (generated by configure)
 Makefile.in		makefile for Unix (template for configure)
-Makefile.msc		makefile for Microsoft C 16-bit
 Makefile.riscos 	makefile for RISCOS
-Makefile.sas		makefile for Amiga SAS/C
 README			guess what
 algorithm.txt		description of the (de)compression algorithm
 configure		configure script for Unix
@@ -13,9 +12,15 @@ descrip.mms		makefile for Vax/VMS
 zlib.3			mini man page for zlib (volunteers to write full
 			man pages from zlib.h welcome. write to jloup@gzip.org)
 
+amiga/Makefile.sas	makefile for Amiga SAS/C
+amiga/Makefile.pup      makefile for Amiga powerUP SAS/C PPC
+
+msdos/Makefile.w32      makefile for Microsoft Visual C++ 32-bit
 msdos/Makefile.b32	makefile for Borland C++   32-bit
 msdos/Makefile.bor	makefile for Borland C/C++ 16-bit
 msdos/Makefile.dj2	makefile for DJGPP 2.x
+msdos/Makefile.emx	makefile for EMX 0.9c (32-bit DOS/OS2)
+msdos/Makefile.msc	makefile for Microsoft C 16-bit
 msdos/Makefile.tc	makefile for Turbo C
 msdos/Makefile.wat	makefile for Watcom C
 msdos/zlib.def        	definition file for Windows DLL
@@ -23,6 +28,8 @@ msdos/zlib.rc         	definition file for Windows DLL
 
 nt/Makefile.nt		makefile for Windows NT
 nt/zlib.dnt		definition file for Windows NT DLL
+nt/Makefile.emx		makefile for EMX 0.9c/RSXNT 1.41 (Win32 Intel)
+nt/Makefile.gcc		makefile for Windows NT using GCC (mingw32)
 
 
 		zlib public header files (must be kept):
@@ -47,6 +54,7 @@ inftrees.c
 inftrees.h
 infutil.c
 infutil.h
+maketree.c
 trees.c
 uncompr.c
 zutil.c
@@ -61,6 +69,10 @@ minigzip.c
 contrib/asm386/ by Gilles Vollant <info@winimage.com>
 	386 asm code replacing longest_match().
 
+contrib/minizip/ by Gilles Vollant <info@winimage.com>
+	Mini zip and unzip based on zlib
+        See http://www.winimage.com/zLibDll/unzip.html
+
 contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
         A C++ I/O streams interface to the zlib gz* functions
 

Make_vms.com

@@ -28,15 +28,15 @@ $ if f$search("SYS$SYSTEM:MMS.EXE").eqs.""
 $  then
 $   dele example.obj;*,minigzip.obj;*
 $   CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" -
-                adler32.c zutil.h zlib.h zconf.h
+                adler32.c zlib.h zconf.h
 $   CALL MAKE compress.OBJ "CC ''CCOPT' compress" -
                 compress.c zlib.h zconf.h
 $   CALL MAKE crc32.OBJ "CC ''CCOPT' crc32" -
-                crc32.c zutil.h zlib.h zconf.h
+                crc32.c zlib.h zconf.h
 $   CALL MAKE deflate.OBJ "CC ''CCOPT' deflate" -
-                deflatec.c deflate.h zutil.h zlib.h zconf.h
+                deflate.c deflate.h zutil.h zlib.h zconf.h
 $   CALL MAKE gzio.OBJ "CC ''CCOPT' gzio" -
-                gsio.c zutil.h zlib.h zconf.h
+                gzio.c zutil.h zlib.h zconf.h
 $   CALL MAKE infblock.OBJ "CC ''CCOPT' infblock" -
                 infblock.c zutil.h zlib.h zconf.h infblock.h
 $   CALL MAKE infcodes.OBJ "CC ''CCOPT' infcodes" -

Makefile

@@ -22,8 +22,9 @@ CFLAGS=-O
 
 LDFLAGS=-L. -lz
 LDSHARED=$(CC)
+CPP=$(CC) -E
 
-VER=1.0.9
+VER=1.1.3
 LIBS=libz.a
 SHAREDLIB=libz.so
 
@@ -32,21 +33,29 @@ RANLIB=ranlib
 TAR=tar
 SHELL=/bin/sh
 
-prefix=/usr/local
+prefix = /usr/local
-exec_prefix = $(prefix)
+exec_prefix = ${prefix}
+libdir = ${exec_prefix}/lib
+includedir = ${prefix}/include
 
 OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
        zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
 
+OBJA =
+# to use the asm code: make OBJA=match.o
+
 TEST_OBJS = example.o minigzip.o
 
-DISTFILES = README INDEX ChangeLog configure Make*[a-z0-9] *.[ch] descrip.mms \
+DISTFILES = README FAQ INDEX ChangeLog configure Make*[a-z0-9] *.[ch] *.mms \
   algorithm.txt zlib.3 msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \
-  nt/Makefile.nt nt/zlib.dnt  contrib/README.contrib contrib/*.txt \
+  nt/Make*[a-z0-9] nt/zlib.dnt amiga/Make*.??? os2/M*.os2 os2/zlib.def \
-  contrib/asm386/*.asm contrib/asm386/*.c \
+  contrib/RE*.contrib contrib/*.txt contrib/asm386/*.asm contrib/asm386/*.c \
-  contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/iostream/*.cpp \
+  contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/asm[56]86/*.?86 \
+  contrib/asm[56]86/*.S contrib/iostream/*.cpp \
   contrib/iostream/*.h  contrib/iostream2/*.h contrib/iostream2/*.cpp \
-  contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32
+  contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32 \
+  contrib/minizip/[CM]*[pe] contrib/minizip/*.[ch] contrib/minizip/*.[td]?? \
+  contrib/delphi*/*.???
 
 all: example minigzip
 
@@ -60,10 +69,16 @@ test: all
 	  echo '		*** zlib test FAILED ***'; \
 	fi
 
-libz.a: $(OBJS)
+libz.a: $(OBJS) $(OBJA)
-	$(AR) $@ $(OBJS)
+	$(AR) $@ $(OBJS) $(OBJA)
 	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
 
+match.o: match.S
+	$(CPP) match.S > _match.s
+	$(CC) -c _match.s
+	mv _match.o match.o
+	rm -f _match.s
+
 $(SHAREDLIB).$(VER): $(OBJS)
 	$(LDSHARED) -o $@ $(OBJS)
 	rm -f $(SHAREDLIB) $(SHAREDLIB).1
@@ -77,14 +92,14 @@ minigzip: minigzip.o $(LIBS)
 	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
 
 install: $(LIBS)
-	-@if [ ! -d $(prefix)/include  ]; then mkdir $(prefix)/include; fi
+	-@if [ ! -d $(includedir)  ]; then mkdir $(includedir); fi
-	-@if [ ! -d $(exec_prefix)/lib ]; then mkdir $(exec_prefix)/lib; fi
+	-@if [ ! -d $(libdir) ]; then mkdir $(libdir); fi
-	cp zlib.h zconf.h $(prefix)/include
+	cp zlib.h zconf.h $(includedir)
-	chmod 644 $(prefix)/include/zlib.h $(prefix)/include/zconf.h
+	chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h
-	cp $(LIBS) $(exec_prefix)/lib
+	cp $(LIBS) $(libdir)
-	cd $(exec_prefix)/lib; chmod 755 $(LIBS)
+	cd $(libdir); chmod 755 $(LIBS)
-	-@(cd $(exec_prefix)/lib; $(RANLIB) libz.a || true) >/dev/null 2>&1
+	-@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
-	cd $(exec_prefix)/lib; if test -f $(SHAREDLIB).$(VER); then \
+	cd $(libdir); if test -f $(SHAREDLIB).$(VER); then \
 	  rm -f $(SHAREDLIB) $(SHAREDLIB).1; \
 	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB); \
 	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB).1; \
@@ -94,32 +109,33 @@ install: $(LIBS)
 # ldconfig is for Linux
 
 uninstall:
-	cd $(prefix)/include; \
+	cd $(includedir); \
 	v=$(VER); \
 	if test -f zlib.h; then \
 	  v=`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`; \
           rm -f zlib.h zconf.h; \
 	fi; \
-	cd $(exec_prefix)/lib; rm -f libz.a; \
+	cd $(libdir); rm -f libz.a; \
 	if test -f $(SHAREDLIB).$$v; then \
 	  rm -f $(SHAREDLIB).$$v $(SHAREDLIB) $(SHAREDLIB).1; \
 	fi
 
 clean:
-	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz
+	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz so_locations \
+	   _match.s maketree
 
 distclean:	clean
 
 zip:
 	mv Makefile Makefile~; cp -p Makefile.in Makefile
-	rm -f test.c ztest*.c
+	rm -f test.c ztest*.c contrib/minizip/test.zip
 	v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
 	zip -ul9 zlib$$v $(DISTFILES)
 	mv Makefile~ Makefile
 
 dist:
 	mv Makefile Makefile~; cp -p Makefile.in Makefile
-	rm -f test.c ztest*.c
+	rm -f test.c ztest*.c contrib/minizip/test.zip
 	d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
 	rm -f $$d.tar.gz; \
 	if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \

Makefile.in

@@ -22,8 +22,9 @@ CFLAGS=-O
 
 LDFLAGS=-L. -lz
 LDSHARED=$(CC)
+CPP=$(CC) -E
 
-VER=1.0.9
+VER=1.1.3
 LIBS=libz.a
 SHAREDLIB=libz.so
 
@@ -32,21 +33,29 @@ RANLIB=ranlib
 TAR=tar
 SHELL=/bin/sh
 
-prefix=/usr/local
+prefix = /usr/local
-exec_prefix = $(prefix)
+exec_prefix = ${prefix}
+libdir = ${exec_prefix}/lib
+includedir = ${prefix}/include
 
 OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
        zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
 
+OBJA =
+# to use the asm code: make OBJA=match.o
+
 TEST_OBJS = example.o minigzip.o
 
-DISTFILES = README INDEX ChangeLog configure Make*[a-z0-9] *.[ch] descrip.mms \
+DISTFILES = README FAQ INDEX ChangeLog configure Make*[a-z0-9] *.[ch] *.mms \
   algorithm.txt zlib.3 msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \
-  nt/Makefile.nt nt/zlib.dnt  contrib/README.contrib contrib/*.txt \
+  nt/Make*[a-z0-9] nt/zlib.dnt amiga/Make*.??? os2/M*.os2 os2/zlib.def \
-  contrib/asm386/*.asm contrib/asm386/*.c \
+  contrib/RE*.contrib contrib/*.txt contrib/asm386/*.asm contrib/asm386/*.c \
-  contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/iostream/*.cpp \
+  contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/asm[56]86/*.?86 \
+  contrib/asm[56]86/*.S contrib/iostream/*.cpp \
   contrib/iostream/*.h  contrib/iostream2/*.h contrib/iostream2/*.cpp \
-  contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32
+  contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32 \
+  contrib/minizip/[CM]*[pe] contrib/minizip/*.[ch] contrib/minizip/*.[td]?? \
+  contrib/delphi*/*.???
 
 all: example minigzip
 
@@ -60,10 +69,16 @@ test: all
 	  echo '		*** zlib test FAILED ***'; \
 	fi
 
-libz.a: $(OBJS)
+libz.a: $(OBJS) $(OBJA)
-	$(AR) $@ $(OBJS)
+	$(AR) $@ $(OBJS) $(OBJA)
 	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
 
+match.o: match.S
+	$(CPP) match.S > _match.s
+	$(CC) -c _match.s
+	mv _match.o match.o
+	rm -f _match.s
+
 $(SHAREDLIB).$(VER): $(OBJS)
 	$(LDSHARED) -o $@ $(OBJS)
 	rm -f $(SHAREDLIB) $(SHAREDLIB).1
@@ -77,14 +92,14 @@ minigzip: minigzip.o $(LIBS)
 	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
 
 install: $(LIBS)
-	-@if [ ! -d $(prefix)/include  ]; then mkdir $(prefix)/include; fi
+	-@if [ ! -d $(includedir)  ]; then mkdir $(includedir); fi
-	-@if [ ! -d $(exec_prefix)/lib ]; then mkdir $(exec_prefix)/lib; fi
+	-@if [ ! -d $(libdir) ]; then mkdir $(libdir); fi
-	cp zlib.h zconf.h $(prefix)/include
+	cp zlib.h zconf.h $(includedir)
-	chmod 644 $(prefix)/include/zlib.h $(prefix)/include/zconf.h
+	chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h
-	cp $(LIBS) $(exec_prefix)/lib
+	cp $(LIBS) $(libdir)
-	cd $(exec_prefix)/lib; chmod 755 $(LIBS)
+	cd $(libdir); chmod 755 $(LIBS)
-	-@(cd $(exec_prefix)/lib; $(RANLIB) libz.a || true) >/dev/null 2>&1
+	-@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
-	cd $(exec_prefix)/lib; if test -f $(SHAREDLIB).$(VER); then \
+	cd $(libdir); if test -f $(SHAREDLIB).$(VER); then \
 	  rm -f $(SHAREDLIB) $(SHAREDLIB).1; \
 	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB); \
 	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB).1; \
@@ -94,32 +109,33 @@ install: $(LIBS)
 # ldconfig is for Linux
 
 uninstall:
-	cd $(prefix)/include; \
+	cd $(includedir); \
 	v=$(VER); \
 	if test -f zlib.h; then \
 	  v=`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`; \
           rm -f zlib.h zconf.h; \
 	fi; \
-	cd $(exec_prefix)/lib; rm -f libz.a; \
+	cd $(libdir); rm -f libz.a; \
 	if test -f $(SHAREDLIB).$$v; then \
 	  rm -f $(SHAREDLIB).$$v $(SHAREDLIB) $(SHAREDLIB).1; \
 	fi
 
 clean:
-	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz
+	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz so_locations \
+	   _match.s maketree
 
 distclean:	clean
 
 zip:
 	mv Makefile Makefile~; cp -p Makefile.in Makefile
-	rm -f test.c ztest*.c
+	rm -f test.c ztest*.c contrib/minizip/test.zip
 	v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
 	zip -ul9 zlib$$v $(DISTFILES)
 	mv Makefile~ Makefile
 
 dist:
 	mv Makefile Makefile~; cp -p Makefile.in Makefile
-	rm -f test.c ztest*.c
+	rm -f test.c ztest*.c contrib/minizip/test.zip
 	d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
 	rm -f $$d.tar.gz; \
 	if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \

Makefile.riscos

@@ -1,8 +1,9 @@
 # Project:   zlib_1_03
-
+# Patched for zlib 1.1.2 rw@shadow.org.uk 19980430
+# test works out-of-the-box, installs `somewhere' on demand
 
 # Toolflags:
-CCflags = -c -depend !Depend -IC: -g -throwback  -DRISCOS  -fnah 
+CCflags = -c -depend !Depend -IC: -g -throwback  -DRISCOS  -fah 
 C++flags = -c -depend !Depend -IC: -throwback
 Linkflags = -aif -c++ -o $@ 
 ObjAsmflags = -throwback -NoCache -depend !Depend
@@ -10,37 +11,141 @@ CMHGflags =
 LibFileflags = -c -l -o $@ 
 Squeezeflags = -o $@
 
+# change the line below to where _you_ want the library installed.
+libdest = lib:zlib
 
 # Final targets:
-@.zlib_lib:   @.o.adler32 @.o.compress @.o.crc32 @.o.deflate @.o.gzio \
+@.lib:   @.o.adler32 @.o.compress @.o.crc32 @.o.deflate @.o.gzio \
         @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil @.o.trees \
-        @.o.uncompress @.o.zutil 
+        @.o.uncompr @.o.zutil 
         LibFile $(LibFileflags) @.o.adler32 @.o.compress @.o.crc32 @.o.deflate \
         @.o.gzio @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil \
-        @.o.trees @.o.uncompress @.o.zutil 
+        @.o.trees @.o.uncompr @.o.zutil 
-@.test:   @.tests.minigzip @.tests.example 
+test:   @.minigzip @.example @.lib
-        echo Please run "Test" in directory tests 
+	@copy @.lib @.libc  A~C~DF~L~N~P~Q~RS~TV
-@.tests.minigzip:   @.o.minigzip @.zlib_lib C:o.Stubs 
+	@echo running tests: hang on.
-        Link $(Linkflags) @.o.minigzip @.zlib_lib C:o.Stubs 
+	@/@.minigzip -f -9 libc
-@.tests.example:   @.o.example @.zlib_lib C:o.Stubs 
+	@/@.minigzip -d libc-gz
-        Link $(Linkflags) @.o.example @.zlib_lib C:o.Stubs 
+	@/@.minigzip -f -1 libc
+	@/@.minigzip -d libc-gz
+	@/@.minigzip -h -9 libc
+	@/@.minigzip -d libc-gz
+	@/@.minigzip -h -1 libc
+	@/@.minigzip -d libc-gz
+	@/@.minigzip -9 libc
+	@/@.minigzip -d libc-gz
+	@/@.minigzip -1 libc
+	@/@.minigzip -d libc-gz
+	@diff @.lib @.libc
+	@echo that should have reported '@.lib and @.libc identical' if you have diff.
+	@/@.example @.fred @.fred
+	@echo that will have given lots of hello!'s.
 
+@.minigzip:   @.o.minigzip @.lib C:o.Stubs 
+        Link $(Linkflags) @.o.minigzip @.lib C:o.Stubs 
+@.example:   @.o.example @.lib C:o.Stubs 
+        Link $(Linkflags) @.o.example @.lib C:o.Stubs
+
+install: @.lib
+	cdir $(libdest)
+	cdir $(libdest).h
+	@copy @.h.zlib $(libdest).h.zlib A~C~DF~L~N~P~Q~RS~TV
+	@copy @.h.zconf $(libdest).h.zconf A~C~DF~L~N~P~Q~RS~TV
+	@copy @.lib $(libdest).lib  A~C~DF~L~N~P~Q~RS~TV
+	@echo okay, installed zlib in $(libdest)
+
+clean:; remove @.minigzip
+	remove @.example
+	remove @.libc
+	-wipe @.o.* F~r~cV
+	remove @.fred
 
 # User-editable dependencies:
 .c.o:
         cc $(ccflags) -o $@ $<
 
 # Static dependencies:
-@.o.example:   @.tests.c.example
-        cc $(ccflags) -o @.o.example @.tests.c.example 
-@.o.minigzip:   @.tests.c.minigzip
-        cc $(ccflags) -o @.o.minigzip @.tests.c.minigzip 
-
 
 # Dynamic dependencies:
-o.minigzip:	tests.c.minigzip
+o.example:	c.example
-o.minigzip:	h.zlib
-o.minigzip:	h.zconf
-o.example:	tests.c.example
 o.example:	h.zlib
 o.example:	h.zconf
+o.minigzip:	c.minigzip
+o.minigzip:	h.zlib
+o.minigzip:	h.zconf
+o.adler32:	c.adler32
+o.adler32:	h.zlib
+o.adler32:	h.zconf
+o.compress:	c.compress
+o.compress:	h.zlib
+o.compress:	h.zconf
+o.crc32:	c.crc32
+o.crc32:	h.zlib
+o.crc32:	h.zconf
+o.deflate:	c.deflate
+o.deflate:	h.deflate
+o.deflate:	h.zutil
+o.deflate:	h.zlib
+o.deflate:	h.zconf
+o.gzio:	c.gzio
+o.gzio:	h.zutil
+o.gzio:	h.zlib
+o.gzio:	h.zconf
+o.infblock:	c.infblock
+o.infblock:	h.zutil
+o.infblock:	h.zlib
+o.infblock:	h.zconf
+o.infblock:	h.infblock
+o.infblock:	h.inftrees
+o.infblock:	h.infcodes
+o.infblock:	h.infutil
+o.infcodes:	c.infcodes
+o.infcodes:	h.zutil
+o.infcodes:	h.zlib
+o.infcodes:	h.zconf
+o.infcodes:	h.inftrees
+o.infcodes:	h.infblock
+o.infcodes:	h.infcodes
+o.infcodes:	h.infutil
+o.infcodes:	h.inffast
+o.inffast:	c.inffast
+o.inffast:	h.zutil
+o.inffast:	h.zlib
+o.inffast:	h.zconf
+o.inffast:	h.inftrees
+o.inffast:	h.infblock
+o.inffast:	h.infcodes
+o.inffast:	h.infutil
+o.inffast:	h.inffast
+o.inflate:	c.inflate
+o.inflate:	h.zutil
+o.inflate:	h.zlib
+o.inflate:	h.zconf
+o.inflate:	h.infblock
+o.inftrees:	c.inftrees
+o.inftrees:	h.zutil
+o.inftrees:	h.zlib
+o.inftrees:	h.zconf
+o.inftrees:	h.inftrees
+o.inftrees:	h.inffixed
+o.infutil:	c.infutil
+o.infutil:	h.zutil
+o.infutil:	h.zlib
+o.infutil:	h.zconf
+o.infutil:	h.infblock
+o.infutil:	h.inftrees
+o.infutil:	h.infcodes
+o.infutil:	h.infutil
+o.trees:	c.trees
+o.trees:	h.deflate
+o.trees:	h.zutil
+o.trees:	h.zlib
+o.trees:	h.zconf
+o.trees:	h.trees
+o.uncompr:	c.uncompr
+o.uncompr:	h.zlib
+o.uncompr:	h.zconf
+o.zutil:	c.zutil
+o.zutil:	h.zutil
+o.zutil:	h.zlib
+o.zutil:	h.zconf

README

@@ -1,4 +1,4 @@
-zlib 1.0.9 is a general purpose data compression library.  All the code
+zlib 1.1.3 is a general purpose data compression library.  All the code
 is thread safe.  The data format used by the zlib library
 is described by RFCs (Request for Comments) 1950 to 1952 in the files 
 ftp://ds.internic.net/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate
@@ -14,33 +14,41 @@ except example.c and minigzip.c.
 
 To compile all files and run the test program, follow the instructions
 given at the top of Makefile. In short "make test; make install"
-should work for most machines.  For MSDOS, use one of the special
+should work for most machines. For Unix: "configure; make test; make install"
-makefiles such as Makefile.msc; for VMS, use Make_vms.com or descrip.mms.
+For MSDOS, use one of the special makefiles such as Makefile.msc.
+For VMS, use Make_vms.com or descrip.mms.
 
-Questions about zlib should be sent to <zlib@quest.jpl.nasa.gov> or,
+Questions about zlib should be sent to <zlib@quest.jpl.nasa.gov>, or to
-if this fails, to the addresses given below in the Copyright section.
+Gilles Vollant <info@winimage.com> for the Windows DLL version.
 The zlib home page is http://www.cdrom.com/pub/infozip/zlib/
 The official zlib ftp site is ftp://ftp.cdrom.com/pub/infozip/zlib/
-Mark Nelson wrote an article about zlib for the Jan. 1997 issue of 
+Before reporting a problem, please check those sites to verify that
-Dr. Dobb's Journal; a copy of the article is available in
+you have the latest version of zlib; otherwise get the latest version and
+check whether the problem still exists or not.
+
+Mark Nelson <markn@tiny.com> wrote an article about zlib for the Jan. 1997
+issue of  Dr. Dobb's Journal; a copy of the article is available in
 http://web2.airmail.net/markn/articles/zlibtool/zlibtool.htm
 
-The changes made in version 1.0.9 are documented in the file ChangeLog.
+The changes made in version 1.1.3 are documented in the file ChangeLog.
-The main changes since 1.0.8 are:
+The main changes since 1.1.2 are:
 
-- added gzputs and gzgets functions
+- fix "an inflate input buffer bug that shows up on rare but persistent
-- do not clear eof flag in gzseek (Mark Diekhans)
+  occasions" (Mark)
-- fix gzseek for files in transparent mode (Mark Diekhans)
+- fix gzread and gztell for concatenated .gz files (Didier Le Botlan)
-- do not assume that vsprintf returns the number of bytes written (Jens Krinke)
+- fix gzseek(..., SEEK_SET) in write mode
-- replace EXPORT with ZEXPORT to avoid conflict with other programs
+- fix crc check after a gzeek (Frank Faubert)
-- added compress2 in zconf.h, zlib.def, zlib.dnt
+- fix miniunzip when the last entry in a zip file is itself a zip file
-- new asm code from Gilles Vollant in contrib/asm386
+  (J Lillge)
-- simplify the inflate code (Mark):
+- add contrib/asm586 and contrib/asm686 (Brian Raiter)
- . Replace ZALLOC's in huft_build() with single ZALLOC in inflate_blocks_new()
+  See http://www.muppetlabs.com/~breadbox/software/assembly.html
- . ZALLOC the length list in inflate_trees_fixed() instead of using stack
+- add support for Delphi 3 in contrib/delphi (Bob Dellaca)
- . ZALLOC the value area for huft_build() instead of using stack
+- add support for C++Builder 3 and Delphi 3 in contrib/delphi2 (Davide Moretti)
- . Simplify Z_FINISH check in inflate()
+- do not exit prematurely in untgz if 0 at start of block (Magnus Holmgren)
+- use macro EXTERN instead of extern to support DLL for BeOS (Sander Stoks)
+- added a FAQ file
 
+plus many changes for portability.
 
 Unsupported third party contributions are provided in directory "contrib".
 
@@ -53,8 +61,17 @@ is in the CPAN (Comprehensive Perl Archive Network) sites, such as:
 ftp://ftp.cis.ufl.edu/pub/perl/CPAN/modules/by-module/Compress/Compress-Zlib*
 
 A Python interface to zlib written by A.M. Kuchling <amk@magnet.com>
-is available from the Python Software Association sites, such as:
+is available in Python 1.5 and later versions, see
-ftp://ftp.python.org/pub/python/contrib/Encoding/zlib*.tar.gz
+http://www.python.org/doc/lib/module-zlib.html
+
+A zlib binding for TCL written by Andreas Kupries <a.kupries@westend.com>
+is availlable at http://www.westend.com/~kupries/doc/trf/man/man.html
+
+An experimental package to read and write files in .zip format,
+written on top of zlib by Gilles Vollant <info@winimage.com>, is
+available at http://www.winimage.com/zLibDll/unzip.html
+and also in the contrib/minizip directory of zlib.
+
 
 Notes for some targets:
 
@@ -66,8 +83,8 @@ Notes for some targets:
 
   From Visual Basic, you can call the DLL functions which do not take
   a structure as argument: compress, uncompress and all gz* functions.
-  See contrib/visual-basic.txt for more information.
+  See contrib/visual-basic.txt for more information, or get
-  I don't know how to handle structures in Visual Basic, sorry.
+  http://www.tcfb.com/dowseware/cmp-z-it.zip
 
 - For 64-bit Irix, deflate.c must be compiled without any optimization.
   With -O, one libpng test fails. The test works in 32 bit mode (with
@@ -76,23 +93,25 @@ Notes for some targets:
 - zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1   
   it works when compiled with cc.
 
+- on Digital Unix 4.0D (formely OSF/1) on AlphaServer, the cc option -std1
+  is necessary to get gzprintf working correctly. This is done by configure.
+
 - zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works
   with other compilers. Use "make test" to check your compiler.
 
-- For shared memory multiprocessors, the decompression code assumes that
+- gzdopen is not supported on RISCOS, BEOS and by some Mac compilers.
-  writes to pointers are atomic. Also the functions zalloc and zfree passed
-  to deflateInit must be multi-threaded in this case.
-
-- gzdopen is not supported on RISCOS, BEOS and Mac
 
 - For Turbo C the small model is supported only with reduced performance to
   avoid any far allocation; it was tested with -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
 
+- For PalmOs, see http://www.cs.uit.no/~perm/PASTA/pilot/software.html
+  Per Harald Myrvang <perm@stud.cs.uit.no>
+
 
 Acknowledgments:
 
   The deflate format used by zlib was defined by Phil Katz. The deflate
-  and zlib specifications were written by Peter Deutsch. Thanks to all the
+  and zlib specifications were written by L. Peter Deutsch. Thanks to all the
   people who reported problems and suggested various improvements in zlib;
   they are too numerous to cite here.
 

amiga/Makefile.pup

@@ -0,0 +1,66 @@
+# Amiga powerUP (TM) Makefile
+# makefile for libpng and SAS C V6.58/7.00 PPC compiler
+# Copyright (C) 1998 by Andreas R. Kleinert
+
+CC       = scppc
+CFLAGS   = NOSTKCHK NOSINT OPTIMIZE OPTGO OPTPEEP OPTINLOCAL OPTINL \
+           OPTLOOP OPTRDEP=8 OPTDEP=8 OPTCOMP=8
+LIBNAME  = libzip.a
+AR       = ppc-amigaos-ar
+AR_FLAGS = cr
+RANLIB   = ppc-amigaos-ranlib
+LDFLAGS  = -r -o
+LDLIBS   = LIB:scppc.a
+LN       = ppc-amigaos-ld
+RM       = delete quiet
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example minigzip
+
+test: all
+        example
+        echo hello world | minigzip | minigzip -d
+
+$(LIBNAME): $(OBJS)
+            $(AR) $(AR_FLAGS) $@ $(OBJS)
+            $(RANLIB) $@
+
+example: example.o $(LIBNAME)
+        $(LN) $(LDFLAGS) example LIB:c_ppc.o example.o $(LIBNAME) $(LDLIBS) LIB:end.o
+
+minigzip: minigzip.o $(LIBNAME)
+        $(LN) $(LDFLAGS) minigzip LIB:c_ppc.o minigzip.o $(LIBNAME) $(LDLIBS) LIB:end.o
+
+clean:
+        $(RM) *.o example minigzip $(LIBNAME) foo.gz
+
+zip:
+        zip -ul9 zlib README ChangeLog Makefile Make????.??? Makefile.?? \
+          descrip.mms *.[ch]
+
+tgz:
+        cd ..; tar cfz zlib/zlib.tgz zlib/README zlib/ChangeLog zlib/Makefile \
+          zlib/Make????.??? zlib/Makefile.?? zlib/descrip.mms zlib/*.[ch]
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zutil.h zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: zutil.h zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzio.o: zutil.h zlib.h zconf.h
+infblock.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
+infcodes.o: zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h inffast.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h infblock.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+infutil.o: zutil.h zlib.h zconf.h inftrees.h infutil.h
+minigzip.o: zlib.h zconf.h
+trees.o: deflate.h zutil.h zlib.h zconf.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h

configure

@@ -24,16 +24,34 @@ VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`
 AR=${AR-"ar rc"}
 RANLIB=${RANLIB-"ranlib"}
 prefix=${prefix-/usr/local}
-exec_prefix=${exec_prefix-$prefix}
+exec_prefix=${exec_prefix-'${prefix}'}
+libdir=${libdir-'${exec_prefix}/lib'}
+includedir=${includedir-'${prefix}/include'}
 shared_ext='.so'
 shared=0
+gcc=0
 old_cc="$CC"
 old_cflags="$CFLAGS"
 
+while test $# -ge 1
+do
 case "$1" in
-  -s* | --s*) shared=1; shift;;
+    -h* | --h*)
-  -h* | --h*) echo 'syntax: configure [ --shared ]'; exit 0;;
+      echo 'usage:'
-esac
+      echo '  configure [--shared] [--prefix=PREFIX]  [--exec_prefix=EXPREFIX]'
+      echo '     [--libdir=LIBDIR] [--includedir=INCLUDEDIR]'
+        exit 0;;
+    -p*=* | --p*=*) prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
+    -e*=* | --e*=*) exec_prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
+    -l*=* | --libdir=*) libdir=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
+    -i*=* | --includedir=*) includedir=`echo $1 | sed 's/[-a-z_]*=//'`;shift;;
+    -p* | --p*) prefix="$2"; shift; shift;;
+    -e* | --e*) exec_prefix="$2"; shift; shift;;
+    -l* | --l*) libdir="$2"; shift; shift;;
+    -i* | --i*) includedir="$2"; shift; shift;;
+    -s* | --s*) shared=1; shift;;
+    esac
+done
 
 test=ztest$$
 cat > $test.c <<EOF
@@ -44,6 +62,7 @@ EOF
 test -z "$CC" && echo Checking for gcc...
 cc=${CC-gcc}
 cflags=${CFLAGS-"-O3"}
+# to force the asm version use: CFLAGS="-O3 -DASMV" ./configure
 case "$cc" in
   *gcc*) gcc=1;;
 esac
@@ -60,15 +79,21 @@ else
   # find system name and corresponding cc options
   CC=${CC-cc}
   case `(uname -sr || echo unknown) 2>/dev/null` in
-  SunOS\ 5*) SFLAGS=${CFLAGS-"-fast -xcg89 -KPIC -R."}
+  HP-UX*)    SFLAGS=${CFLAGS-"-O +z"}
-             CFLAGS=${CFLAGS-"-fast -xcg89"}
+	     CFLAGS=${CFLAGS-"-O"}
-	     LDSHARED=${LDSHARED-"cc -G"};;
+#	     LDSHARED=${LDSHARED-"ld -b +vnocompatwarnings"}
-  SunOS\ 4*) SFLAGS=${CFLAGS-"-O2 -PIC"}
+	     LDSHARED=${LDSHARED-"ld -b"}
-	     CFLAGS=${CFLAGS-"-O2"}
+	     shared_ext='.sl'
-	     LDSHARED=${LDSHARED-"ld"};;
+	     SHAREDLIB='libz.sl';;
   IRIX*)     SFLAGS=${CFLAGS-"-ansi -O2 -rpath ."}
 	     CFLAGS=${CFLAGS-"-ansi -O2"}
 	     LDSHARED=${LDSHARED-"cc -shared"};;
+  OSF1\ V4*) SFLAGS=${CFLAGS-"-O -std1"}
+	     CFLAGS=${CFLAGS-"-O -std1"}
+	     LDSHARED=${LDSHARED-"cc -shared  -Wl,-soname,$SHAREDLIB -Wl,-msym -Wl,-rpath,$(libdir) -Wl,-set_version,${VER}:1.0"};;
+  OSF1*)     SFLAGS=${CFLAGS-"-O -std1"}
+	     CFLAGS=${CFLAGS-"-O -std1"}
+	     LDSHARED=${LDSHARED-"cc -shared"};;
   QNX*)      SFLAGS=${CFLAGS-"-4 -O"}
              CFLAGS=${CFLAGS-"-4 -O"}
 	     LDSHARED=${LDSHARED-"cc"}
@@ -77,16 +102,20 @@ else
   SCO_SV\ 3.2*) SFLAGS=${CFLAGS-"-O3 -dy -KPIC "}
 	     CFLAGS=${CFLAGS-"-O3"}
 	     LDSHARED=${LDSHARED-"cc -dy -KPIC -G"};;
-  HP-UX*)    SFLAGS=${CFLAGS-"-O +z"}
+  SunOS\ 5*) SFLAGS=${CFLAGS-"-fast -xcg89 -KPIC -R."}
-	     CFLAGS=${CFLAGS-"-O"}
+             CFLAGS=${CFLAGS-"-fast -xcg89"}
-#	     LDSHARED=${LDSHARED-"ld -b +vnocompatwarnings"}
+	     LDSHARED=${LDSHARED-"cc -G"};;
-	     LDSHARED=${LDSHARED-"ld -b"}
+  SunOS\ 4*) SFLAGS=${CFLAGS-"-O2 -PIC"}
-	     shared_ext='.sl'
+	     CFLAGS=${CFLAGS-"-O2"}
-	     SHAREDLIB='libz.sl';;
+	     LDSHARED=${LDSHARED-"ld"};;
   UNIX_System_V\ 4.2.0) 
 	     SFLAGS=${CFLAGS-"-KPIC -O"}
 	     CFLAGS=${CFLAGS-"-O"}
 	     LDSHARED=${LDSHARED-"cc -G"};;
+  UNIX_SV\ 4.2MP)
+	     SFLAGS=${CFLAGS-"-Kconform_pic -O"}
+	     CFLAGS=${CFLAGS-"-O"}
+	     LDSHARED=${LDSHARED-"cc -G"};;
   # send working options for other systems to support@gzip.org
   *)         SFLAGS=${CFLAGS-"-O"}
 	     CFLAGS=${CFLAGS-"-O"}
@@ -114,20 +143,62 @@ if test $shared -eq 0; then
   LDSHARED="$CC"
   echo Building static library $LIBS version $VER with $CC.
 fi
-rm -f $test.[co] $test$shared_ext
 
-if test -f /usr/include/unistd.h; then
+cat > $test.c <<EOF
+#include <unistd.h>
+int main() { return 0; }
+EOF
+if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
   CFLAGS="$CFLAGS -DHAVE_UNISTD_H"
+  echo "Checking for unistd.h... Yes."
+else
+  echo "Checking for unistd.h... No."
 fi
 
-if test ! -f /usr/include/errno.h; then
+cat > $test.c <<EOF
+#include <errno.h>
+int main() { return 0; }
+EOF
+if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+  echo "Checking for errno.h...	 Yes."
+else
+  echo "Checking for errno.h...	 No."
   CFLAGS="$CFLAGS -DNO_ERRNO_H"
 fi
 
+cat > $test.c <<EOF
+#include <sys/types.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+caddr_t hello() {
+  return mmap((caddr_t)0, (off_t)0, PROT_READ, MAP_SHARED, 0, (off_t)0); 
+}
+EOF
+if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+  CFLAGS="$CFLAGS -DUSE_MMAP"
+  echo Checking for mmap support... Yes.
+else
+  echo Checking for mmap support... No.
+fi
+
+CPP=${CPP-"$CC -E"}
+case $CFLAGS in
+  *ASMV*)
+    if test "`nm $test.o | grep _hello`" = ""; then
+      CPP="$CPP -DNO_UNDERLINE"
+      echo Checking for underline in external names... No.
+    else
+      echo Checking for underline in external names... Yes.
+    fi;;
+esac
+
+rm -f $test.[co] $test$shared_ext
+
 # udpate Makefile
 sed < Makefile.in "
 /^CC *=/s%=.*%=$CC%
 /^CFLAGS *=/s%=.*%=$CFLAGS%
+/^CPP *=/s%=.*%=$CPP%
 /^LDSHARED *=/s%=.*%=$LDSHARED%
 /^LIBS *=/s%=.*%=$LIBS%
 /^SHAREDLIB *=/s%=.*%=$SHAREDLIB%
@@ -136,4 +207,6 @@ sed < Makefile.in "
 /^VER *=/s%=.*%=$VER%
 /^prefix *=/s%=.*%=$prefix%
 /^exec_prefix *=/s%=.*%=$exec_prefix%
+/^libdir *=/s%=.*%=$libdir%
+/^includedir *=/s%=.*%=$includedir%
 " > Makefile

contrib/README.contrib

@@ -7,6 +7,20 @@ for help about these, not the zlib authors. Thanks.
 asm386/     by Gilles Vollant <info@winimage.com>
 	386 asm code replacing longest_match(), for Visual C++ 4.2 and ML 6.11c
 
+asm586/ and asm686/    by Brian Raiter <breadbox@muppetlabs.com> 
+        asm code for Pentium and Pentium Pro
+        See http://www.muppetlabs.com/~breadbox/software/assembly.html
+
+delphi/      by Bob Dellaca <bobdl@xtra.co.nz>
+	Support for Delphi
+
+delphi2/     by Davide Moretti <dave@rimini.com>
+        Another support for C++Builder and Delphi
+
+minizip/    by Gilles Vollant <info@winimage.com>
+	Mini zip and unzip based on zlib
+        See http://www.winimage.com/zLibDll/unzip.html
+
 iostream/   by Kevin Ruland <kevin@rodin.wustl.edu>
         A C++ I/O streams interface to the zlib gz* functions
 

contrib/asm386/zlibvc.def

@@ -0,0 +1,74 @@
+LIBRARY		"zlib"
+
+DESCRIPTION	'"""zlib data compression library"""'
+
+
+VERSION		1.11
+
+
+HEAPSIZE	1048576,8192
+
+EXPORTS
+    adler32                        @1
+    compress                       @2
+    crc32                          @3
+    deflate                        @4
+    deflateCopy                    @5
+    deflateEnd                     @6
+    deflateInit2_                  @7
+    deflateInit_                   @8
+    deflateParams                  @9
+    deflateReset                   @10
+    deflateSetDictionary           @11
+    gzclose                        @12
+    gzdopen                        @13
+    gzerror                        @14
+    gzflush                        @15
+    gzopen                         @16
+    gzread                         @17
+    gzwrite                        @18
+    inflate                        @19
+    inflateEnd                     @20
+    inflateInit2_                  @21
+    inflateInit_                   @22
+    inflateReset                   @23
+    inflateSetDictionary           @24
+    inflateSync                    @25
+    uncompress                     @26
+    zlibVersion                    @27
+    gzprintf                       @28
+    gzputc                         @29
+    gzgetc                         @30
+    gzseek                         @31
+    gzrewind                       @32
+    gztell                         @33
+    gzeof                          @34
+    gzsetparams                    @35
+    zError                         @36
+    inflateSyncPoint               @37
+    get_crc_table                  @38
+    compress2                      @39
+    gzputs                         @40
+    gzgets                         @41
+
+	unzOpen                       @61
+	unzClose                      @62
+	unzGetGlobalInfo              @63
+	unzGetCurrentFileInfo         @64
+	unzGoToFirstFile              @65
+	unzGoToNextFile               @66
+	unzOpenCurrentFile            @67
+	unzReadCurrentFile            @68
+	unztell                       @70
+	unzeof                        @71
+	unzCloseCurrentFile           @72
+	unzGetGlobalComment           @73
+	unzStringFileNameCompare      @74
+	unzLocateFile                 @75
+	unzGetLocalExtrafield         @76
+
+	zipOpen                       @80
+	zipOpenNewFileInZip           @81
+	zipWriteInFileInZip           @82
+	zipCloseFileInZip             @83
+	zipClose                      @84

contrib/asm386/zlibvc.dsp

@@ -47,7 +47,8 @@ CFG=zlibvc - Win32 Release
 # PROP Target_Dir ""
 CPP=cl.exe
 # ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c
-# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /YX /FD /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /FD /c
+# SUBTRACT CPP /YX
 MTL=midl.exe
 # ADD BASE MTL /nologo /D "NDEBUG" /win32
 # ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
@@ -76,7 +77,8 @@ LINK32=link.exe
 # PROP Target_Dir ""
 CPP=cl.exe
 # ADD BASE CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /YX /c
-# ADD CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /YX /FD /c
+# ADD CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /FD /c
+# SUBTRACT CPP /YX
 MTL=midl.exe
 # ADD BASE MTL /nologo /D "_DEBUG" /win32
 # ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
@@ -109,7 +111,8 @@ MTL=midl.exe
 # ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
 CPP=cl.exe
 # ADD BASE CPP /nologo /MT /Gt0 /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /YX /FD /c
-# ADD CPP /nologo /MT /Gt0 /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /YX /FD /c
+# ADD CPP /nologo /MT /Gt0 /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /FD /c
+# SUBTRACT CPP /YX
 RSC=rc.exe
 # ADD BASE RSC /l 0x40c /d "NDEBUG"
 # ADD RSC /l 0x40c /d "NDEBUG"
@@ -138,7 +141,8 @@ LINK32=link.exe
 # PROP Target_Dir ""
 CPP=cl.exe
 # ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /YX /FD /c
-# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /YX /FD /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /FD /c
+# SUBTRACT CPP /YX
 MTL=midl.exe
 # ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
 # ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
@@ -170,7 +174,8 @@ LINK32=link.exe
 # PROP Target_Dir ""
 CPP=cl.exe
 # ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /YX /FD /c
-# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /YX /FD /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /FD /c
+# SUBTRACT CPP /YX
 MTL=midl.exe
 # ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
 # ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
@@ -525,6 +530,40 @@ DEP_CPP_UNCOM=\
 	".\zlib.h"\
 	
 
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\unzip.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\zip.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
 
 !ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"

contrib/asm386/zlibvc.dsw

@@ -3,7 +3,19 @@ Microsoft Developer Studio Workspace File, Format Version 5.00
 
 ###############################################################################
 
-Project: "zlibvc"=".\zlibvc.dsp" - Package Owner=<4>
+Project: "zlibstat"=.\zlibstat.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Project: "zlibvc"=.\zlibvc.dsp - Package Owner=<4>
 
 Package=<5>
 {{{

contrib/asm586/README.586

@@ -0,0 +1,43 @@
+This is a patched version of zlib modified to use
+Pentium-optimized assembly code in the deflation algorithm. The files
+changed/added by this patch are:
+
+README.586
+match.S
+
+The effectiveness of these modifications is a bit marginal, as the the
+program's bottleneck seems to be mostly L1-cache contention, for which
+there is no real way to work around without rewriting the basic
+algorithm. The speedup on average is around 5-10% (which is generally
+less than the amount of variance between subsequent executions).
+However, when used at level 9 compression, the cache contention can
+drop enough for the assembly version to achieve 10-20% speedup (and
+sometimes more, depending on the amount of overall redundancy in the
+files). Even here, though, cache contention can still be the limiting
+factor, depending on the nature of the program using the zlib library.
+This may also mean that better improvements will be seen on a Pentium
+with MMX, which suffers much less from L1-cache contention, but I have
+not yet verified this.
+
+Note that this code has been tailored for the Pentium in particular,
+and will not perform well on the Pentium Pro (due to the use of a
+partial register in the inner loop).
+
+If you are using an assembler other than GNU as, you will have to
+translate match.S to use your assembler's syntax. (Have fun.)
+
+Brian Raiter
+breadbox@muppetlabs.com
+April, 1998
+
+
+Added for zlib 1.1.3:
+
+The patches come from
+http://www.muppetlabs.com/~breadbox/software/assembly.html
+
+To compile zlib with this asm file, copy match.S to the zlib directory
+then do:
+
+CFLAGS="-O3 -DASMV" ./configure
+make OBJA=match.o

contrib/asm586/match.S

@@ -0,0 +1,354 @@
+/* match.s -- Pentium-optimized version of longest_match()
+ * Written for zlib 1.1.2
+ * Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License.
+ */
+
+#ifndef NO_UNDERLINE
+#define	match_init	_match_init
+#define	longest_match	_longest_match
+#endif
+
+#define	MAX_MATCH	(258)
+#define	MIN_MATCH	(3)
+#define	MIN_LOOKAHEAD	(MAX_MATCH + MIN_MATCH + 1)
+#define	MAX_MATCH_8	((MAX_MATCH + 7) & ~7)
+
+/* stack frame offsets */
+
+#define	wmask			0	/* local copy of s->wmask	*/
+#define	window			4	/* local copy of s->window	*/
+#define	windowbestlen		8	/* s->window + bestlen		*/
+#define	chainlenscanend		12	/* high word: current chain len	*/
+					/* low word: last bytes sought	*/
+#define	scanstart		16	/* first two bytes of string	*/
+#define	scanalign		20	/* dword-misalignment of string	*/
+#define	nicematch		24	/* a good enough match size	*/
+#define	bestlen			28	/* size of best match so far	*/
+#define	scan			32	/* ptr to string wanting match	*/
+
+#define	LocalVarsSize		(36)
+/*	saved ebx		36 */
+/*	saved edi		40 */
+/*	saved esi		44 */
+/*	saved ebp		48 */
+/*	return address		52 */
+#define	deflatestate		56	/* the function arguments	*/
+#define	curmatch		60
+
+/* Offsets for fields in the deflate_state structure. These numbers
+ * are calculated from the definition of deflate_state, with the
+ * assumption that the compiler will dword-align the fields. (Thus,
+ * changing the definition of deflate_state could easily cause this
+ * program to crash horribly, without so much as a warning at
+ * compile time. Sigh.)
+ */
+#define	dsWSize			36
+#define	dsWMask			44
+#define	dsWindow		48
+#define	dsPrev			56
+#define	dsMatchLen		88
+#define	dsPrevMatch		92
+#define	dsStrStart		100
+#define	dsMatchStart		104
+#define	dsLookahead		108
+#define	dsPrevLen		112
+#define	dsMaxChainLen		116
+#define	dsGoodMatch		132
+#define	dsNiceMatch		136
+
+
+.file "match.S"
+
+.globl	match_init, longest_match
+
+.text
+
+/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
+
+longest_match:
+
+/* Save registers that the compiler may be using, and adjust %esp to	*/
+/* make room for our stack frame.					*/
+
+		pushl	%ebp
+		pushl	%edi
+		pushl	%esi
+		pushl	%ebx
+		subl	$LocalVarsSize, %esp
+
+/* Retrieve the function arguments. %ecx will hold cur_match		*/
+/* throughout the entire function. %edx will hold the pointer to the	*/
+/* deflate_state structure during the function's setup (before		*/
+/* entering the main loop).						*/
+
+		movl	deflatestate(%esp), %edx
+		movl	curmatch(%esp), %ecx
+
+/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;	*/
+
+		movl	dsNiceMatch(%edx), %eax
+		movl	dsLookahead(%edx), %ebx
+		cmpl	%eax, %ebx
+		jl	LookaheadLess
+		movl	%eax, %ebx
+LookaheadLess:	movl	%ebx, nicematch(%esp)
+
+/* register Bytef *scan = s->window + s->strstart;			*/
+
+		movl	dsWindow(%edx), %esi
+		movl	%esi, window(%esp)
+		movl	dsStrStart(%edx), %ebp
+		lea	(%esi,%ebp), %edi
+		movl	%edi, scan(%esp)
+
+/* Determine how many bytes the scan ptr is off from being		*/
+/* dword-aligned.							*/
+
+		movl	%edi, %eax
+		negl	%eax
+		andl	$3, %eax
+		movl	%eax, scanalign(%esp)
+
+/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ?			*/
+/*     s->strstart - (IPos)MAX_DIST(s) : NIL;				*/
+
+		movl	dsWSize(%edx), %eax
+		subl	$MIN_LOOKAHEAD, %eax
+		subl	%eax, %ebp
+		jg	LimitPositive
+		xorl	%ebp, %ebp
+LimitPositive:
+
+/* unsigned chain_length = s->max_chain_length;				*/
+/* if (s->prev_length >= s->good_match) {				*/
+/*     chain_length >>= 2;						*/
+/* }									*/
+
+		movl	dsPrevLen(%edx), %eax
+		movl	dsGoodMatch(%edx), %ebx
+		cmpl	%ebx, %eax
+		movl	dsMaxChainLen(%edx), %ebx
+		jl	LastMatchGood
+		shrl	$2, %ebx
+LastMatchGood:
+
+/* chainlen is decremented once beforehand so that the function can	*/
+/* use the sign flag instead of the zero flag for the exit test.	*/
+/* It is then shifted into the high word, to make room for the scanend	*/
+/* scanend value, which it will always accompany.			*/
+
+		decl	%ebx
+		shll	$16, %ebx
+
+/* int best_len = s->prev_length;					*/
+
+		movl	dsPrevLen(%edx), %eax
+		movl	%eax, bestlen(%esp)
+
+/* Store the sum of s->window + best_len in %esi locally, and in %esi.	*/
+
+		addl	%eax, %esi
+		movl	%esi, windowbestlen(%esp)
+
+/* register ush scan_start = *(ushf*)scan;				*/
+/* register ush scan_end   = *(ushf*)(scan+best_len-1);			*/
+
+		movw	(%edi), %bx
+		movw	%bx, scanstart(%esp)
+		movw	-1(%edi,%eax), %bx
+		movl	%ebx, chainlenscanend(%esp)
+
+/* Posf *prev = s->prev;						*/
+/* uInt wmask = s->w_mask;						*/
+
+		movl	dsPrev(%edx), %edi
+		movl	dsWMask(%edx), %edx
+		mov	%edx, wmask(%esp)
+
+/* Jump into the main loop.						*/
+
+		jmp	LoopEntry
+
+.balign 16
+
+/* do {
+ *     match = s->window + cur_match;
+ *     if (*(ushf*)(match+best_len-1) != scan_end ||
+ *         *(ushf*)match != scan_start) continue;
+ *     [...]
+ * } while ((cur_match = prev[cur_match & wmask]) > limit
+ *          && --chain_length != 0);
+ *
+ * Here is the inner loop of the function. The function will spend the
+ * majority of its time in this loop, and majority of that time will
+ * be spent in the first ten instructions.
+ *
+ * Within this loop:
+ * %ebx = chainlenscanend - i.e., ((chainlen << 16) | scanend)
+ * %ecx = curmatch
+ * %edx = curmatch & wmask
+ * %esi = windowbestlen - i.e., (window + bestlen)
+ * %edi = prev
+ * %ebp = limit
+ *
+ * Two optimization notes on the choice of instructions:
+ *
+ * The first instruction uses a 16-bit address, which costs an extra,
+ * unpairable cycle. This is cheaper than doing a 32-bit access and
+ * zeroing the high word, due to the 3-cycle misalignment penalty which
+ * would occur half the time. This also turns out to be cheaper than
+ * doing two separate 8-bit accesses, as the memory is so rarely in the
+ * L1 cache.
+ *
+ * The window buffer, however, apparently spends a lot of time in the
+ * cache, and so it is faster to retrieve the word at the end of the
+ * match string with two 8-bit loads. The instructions that test the
+ * word at the beginning of the match string, however, are executed
+ * much less frequently, and there it was cheaper to use 16-bit
+ * instructions, which avoided the necessity of saving off and
+ * subsequently reloading one of the other registers.
+ */
+LookupLoop:
+							/* 1 U & V  */
+		movw	(%edi,%edx,2), %cx		/* 2 U pipe */
+		movl	wmask(%esp), %edx		/* 2 V pipe */
+		cmpl	%ebp, %ecx			/* 3 U pipe */
+		jbe	LeaveNow			/* 3 V pipe */
+		subl	$0x00010000, %ebx		/* 4 U pipe */
+		js	LeaveNow			/* 4 V pipe */
+LoopEntry:	movb	-1(%esi,%ecx), %al		/* 5 U pipe */
+		andl	%ecx, %edx			/* 5 V pipe */
+		cmpb	%bl, %al			/* 6 U pipe */
+		jnz	LookupLoop			/* 6 V pipe */
+		movb	(%esi,%ecx), %ah
+		cmpb	%bh, %ah
+		jnz	LookupLoop
+		movl	window(%esp), %eax
+		movw	(%eax,%ecx), %ax
+		cmpw	scanstart(%esp), %ax
+		jnz	LookupLoop
+
+/* Store the current value of chainlen.					*/
+
+		movl	%ebx, chainlenscanend(%esp)
+
+/* Point %edi to the string under scrutiny, and %esi to the string we	*/
+/* are hoping to match it up with. In actuality, %esi and %edi are	*/
+/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is	*/
+/* initialized to -(MAX_MATCH_8 - scanalign).				*/
+
+		movl	window(%esp), %esi
+		movl	scan(%esp), %edi
+		addl	%ecx, %esi
+		movl	scanalign(%esp), %eax
+		movl	$(-MAX_MATCH_8), %edx
+		lea	MAX_MATCH_8(%edi,%eax), %edi
+		lea	MAX_MATCH_8(%esi,%eax), %esi
+
+/* Test the strings for equality, 8 bytes at a time. At the end,
+ * adjust %edx so that it is offset to the exact byte that mismatched.
+ *
+ * We already know at this point that the first three bytes of the
+ * strings match each other, and they can be safely passed over before
+ * starting the compare loop. So what this code does is skip over 0-3
+ * bytes, as much as necessary in order to dword-align the %edi
+ * pointer. (%esi will still be misaligned three times out of four.)
+ *
+ * It should be confessed that this loop usually does not represent
+ * much of the total running time. Replacing it with a more
+ * straightforward "rep cmpsb" would not drastically degrade
+ * performance.
+ */
+LoopCmps:
+		movl	(%esi,%edx), %eax
+		movl	(%edi,%edx), %ebx
+		xorl	%ebx, %eax
+		jnz	LeaveLoopCmps
+		movl	4(%esi,%edx), %eax
+		movl	4(%edi,%edx), %ebx
+		xorl	%ebx, %eax
+		jnz	LeaveLoopCmps4
+		addl	$8, %edx
+		jnz	LoopCmps
+		jmp	LenMaximum
+LeaveLoopCmps4:	addl	$4, %edx
+LeaveLoopCmps:	testl	$0x0000FFFF, %eax
+		jnz	LenLower
+		addl	$2, %edx
+		shrl	$16, %eax
+LenLower:	subb	$1, %al
+		adcl	$0, %edx
+
+/* Calculate the length of the match. If it is longer than MAX_MATCH,	*/
+/* then automatically accept it as the best possible match and leave.	*/
+
+		lea	(%edi,%edx), %eax
+		movl	scan(%esp), %edi
+		subl	%edi, %eax
+		cmpl	$MAX_MATCH, %eax
+		jge	LenMaximum
+
+/* If the length of the match is not longer than the best match we	*/
+/* have so far, then forget it and return to the lookup loop.		*/
+
+		movl	deflatestate(%esp), %edx
+		movl	bestlen(%esp), %ebx
+		cmpl	%ebx, %eax
+		jg	LongerMatch
+		movl	chainlenscanend(%esp), %ebx
+		movl	windowbestlen(%esp), %esi
+		movl	dsPrev(%edx), %edi
+		movl	wmask(%esp), %edx
+		andl	%ecx, %edx
+		jmp	LookupLoop
+
+/*         s->match_start = cur_match;					*/
+/*         best_len = len;						*/
+/*         if (len >= nice_match) break;				*/
+/*         scan_end = *(ushf*)(scan+best_len-1);			*/
+
+LongerMatch:	movl	nicematch(%esp), %ebx
+		movl	%eax, bestlen(%esp)
+		movl	%ecx, dsMatchStart(%edx)
+		cmpl	%ebx, %eax
+		jge	LeaveNow
+		movl	window(%esp), %esi
+		addl	%eax, %esi
+		movl	%esi, windowbestlen(%esp)
+		movl	chainlenscanend(%esp), %ebx
+		movw	-1(%edi,%eax), %bx
+		movl	dsPrev(%edx), %edi
+		movl	%ebx, chainlenscanend(%esp)
+		movl	wmask(%esp), %edx
+		andl	%ecx, %edx
+		jmp	LookupLoop
+
+/* Accept the current string, with the maximum possible length.		*/
+
+LenMaximum:	movl	deflatestate(%esp), %edx
+		movl	$MAX_MATCH, bestlen(%esp)
+		movl	%ecx, dsMatchStart(%edx)
+
+/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len;		*/
+/* return s->lookahead;							*/
+
+LeaveNow:
+		movl	deflatestate(%esp), %edx
+		movl	bestlen(%esp), %ebx
+		movl	dsLookahead(%edx), %eax
+		cmpl	%eax, %ebx
+		jg	LookaheadRet
+		movl	%ebx, %eax
+LookaheadRet:
+
+/* Restore the stack and return from whence we came.			*/
+
+		addl	$LocalVarsSize, %esp
+		popl	%ebx
+		popl	%esi
+		popl	%edi
+		popl	%ebp
+match_init:	ret

contrib/asm686/README.686

@@ -0,0 +1,34 @@
+This is a patched version of zlib, modified to use
+Pentium-Pro-optimized assembly code in the deflation algorithm. The
+files changed/added by this patch are:
+
+README.686
+match.S
+
+The speedup that this patch provides varies, depending on whether the
+compiler used to build the original version of zlib falls afoul of the
+PPro's speed traps. My own tests show a speedup of around 10-20% at
+the default compression level, and 20-30% using -9, against a version
+compiled using gcc 2.7.2.3. Your mileage may vary.
+
+Note that this code has been tailored for the PPro/PII in particular,
+and will not perform particuarly well on a Pentium.
+
+If you are using an assembler other than GNU as, you will have to
+translate match.S to use your assembler's syntax. (Have fun.)
+
+Brian Raiter
+breadbox@muppetlabs.com
+April, 1998
+
+
+Added for zlib 1.1.3:
+
+The patches come from
+http://www.muppetlabs.com/~breadbox/software/assembly.html
+
+To compile zlib with this asm file, copy match.S to the zlib directory
+then do:
+
+CFLAGS="-O3 -DASMV" ./configure
+make OBJA=match.o

contrib/asm686/match.S

@@ -0,0 +1,327 @@
+/* match.s -- Pentium-Pro-optimized version of longest_match()
+ * Written for zlib 1.1.2
+ * Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License.
+ */
+
+#ifndef NO_UNDERLINE
+#define	match_init	_match_init
+#define	longest_match	_longest_match
+#endif
+
+#define	MAX_MATCH	(258)
+#define	MIN_MATCH	(3)
+#define	MIN_LOOKAHEAD	(MAX_MATCH + MIN_MATCH + 1)
+#define	MAX_MATCH_8	((MAX_MATCH + 7) & ~7)
+
+/* stack frame offsets */
+
+#define	chainlenwmask		0	/* high word: current chain len	*/
+					/* low word: s->wmask		*/
+#define	window			4	/* local copy of s->window	*/
+#define	windowbestlen		8	/* s->window + bestlen		*/
+#define	scanstart		16	/* first two bytes of string	*/
+#define	scanend			12	/* last two bytes of string	*/
+#define	scanalign		20	/* dword-misalignment of string	*/
+#define	nicematch		24	/* a good enough match size	*/
+#define	bestlen			28	/* size of best match so far	*/
+#define	scan			32	/* ptr to string wanting match	*/
+
+#define	LocalVarsSize		(36)
+/*	saved ebx		36 */
+/*	saved edi		40 */
+/*	saved esi		44 */
+/*	saved ebp		48 */
+/*	return address		52 */
+#define	deflatestate		56	/* the function arguments	*/
+#define	curmatch		60
+
+/* Offsets for fields in the deflate_state structure. These numbers
+ * are calculated from the definition of deflate_state, with the
+ * assumption that the compiler will dword-align the fields. (Thus,
+ * changing the definition of deflate_state could easily cause this
+ * program to crash horribly, without so much as a warning at
+ * compile time. Sigh.)
+ */
+#define	dsWSize			36
+#define	dsWMask			44
+#define	dsWindow		48
+#define	dsPrev			56
+#define	dsMatchLen		88
+#define	dsPrevMatch		92
+#define	dsStrStart		100
+#define	dsMatchStart		104
+#define	dsLookahead		108
+#define	dsPrevLen		112
+#define	dsMaxChainLen		116
+#define	dsGoodMatch		132
+#define	dsNiceMatch		136
+
+
+.file "match.S"
+
+.globl	match_init, longest_match
+
+.text
+
+/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
+
+longest_match:
+
+/* Save registers that the compiler may be using, and adjust %esp to	*/
+/* make room for our stack frame.					*/
+
+		pushl	%ebp
+		pushl	%edi
+		pushl	%esi
+		pushl	%ebx
+		subl	$LocalVarsSize, %esp
+
+/* Retrieve the function arguments. %ecx will hold cur_match		*/
+/* throughout the entire function. %edx will hold the pointer to the	*/
+/* deflate_state structure during the function's setup (before		*/
+/* entering the main loop).						*/
+
+		movl	deflatestate(%esp), %edx
+		movl	curmatch(%esp), %ecx
+
+/* uInt wmask = s->w_mask;						*/
+/* unsigned chain_length = s->max_chain_length;				*/
+/* if (s->prev_length >= s->good_match) {				*/
+/*     chain_length >>= 2;						*/
+/* }									*/
+
+		movl	dsPrevLen(%edx), %eax
+		movl	dsGoodMatch(%edx), %ebx
+		cmpl	%ebx, %eax
+		movl	dsWMask(%edx), %eax
+		movl	dsMaxChainLen(%edx), %ebx
+		jl	LastMatchGood
+		shrl	$2, %ebx
+LastMatchGood:
+
+/* chainlen is decremented once beforehand so that the function can	*/
+/* use the sign flag instead of the zero flag for the exit test.	*/
+/* It is then shifted into the high word, to make room for the wmask	*/
+/* value, which it will always accompany.				*/
+
+		decl	%ebx
+		shll	$16, %ebx
+		orl	%eax, %ebx
+		movl	%ebx, chainlenwmask(%esp)
+
+/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;	*/
+
+		movl	dsNiceMatch(%edx), %eax
+		movl	dsLookahead(%edx), %ebx
+		cmpl	%eax, %ebx
+		jl	LookaheadLess
+		movl	%eax, %ebx
+LookaheadLess:	movl	%ebx, nicematch(%esp)
+
+/* register Bytef *scan = s->window + s->strstart;			*/
+
+		movl	dsWindow(%edx), %esi
+		movl	%esi, window(%esp)
+		movl	dsStrStart(%edx), %ebp
+		lea	(%esi,%ebp), %edi
+		movl	%edi, scan(%esp)
+
+/* Determine how many bytes the scan ptr is off from being		*/
+/* dword-aligned.							*/
+
+		movl	%edi, %eax
+		negl	%eax
+		andl	$3, %eax
+		movl	%eax, scanalign(%esp)
+
+/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ?			*/
+/*     s->strstart - (IPos)MAX_DIST(s) : NIL;				*/
+
+		movl	dsWSize(%edx), %eax
+		subl	$MIN_LOOKAHEAD, %eax
+		subl	%eax, %ebp
+		jg	LimitPositive
+		xorl	%ebp, %ebp
+LimitPositive:
+
+/* int best_len = s->prev_length;					*/
+
+		movl	dsPrevLen(%edx), %eax
+		movl	%eax, bestlen(%esp)
+
+/* Store the sum of s->window + best_len in %esi locally, and in %esi.	*/
+
+		addl	%eax, %esi
+		movl	%esi, windowbestlen(%esp)
+
+/* register ush scan_start = *(ushf*)scan;				*/
+/* register ush scan_end   = *(ushf*)(scan+best_len-1);			*/
+/* Posf *prev = s->prev;						*/
+
+		movzwl	(%edi), %ebx
+		movl	%ebx, scanstart(%esp)
+		movzwl	-1(%edi,%eax), %ebx
+		movl	%ebx, scanend(%esp)
+		movl	dsPrev(%edx), %edi
+
+/* Jump into the main loop.						*/
+
+		movl	chainlenwmask(%esp), %edx
+		jmp	LoopEntry
+
+.balign 16
+
+/* do {
+ *     match = s->window + cur_match;
+ *     if (*(ushf*)(match+best_len-1) != scan_end ||
+ *         *(ushf*)match != scan_start) continue;
+ *     [...]
+ * } while ((cur_match = prev[cur_match & wmask]) > limit
+ *          && --chain_length != 0);
+ *
+ * Here is the inner loop of the function. The function will spend the
+ * majority of its time in this loop, and majority of that time will
+ * be spent in the first ten instructions.
+ *
+ * Within this loop:
+ * %ebx = scanend
+ * %ecx = curmatch
+ * %edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
+ * %esi = windowbestlen - i.e., (window + bestlen)
+ * %edi = prev
+ * %ebp = limit
+ */
+LookupLoop:
+		andl	%edx, %ecx
+		movzwl	(%edi,%ecx,2), %ecx
+		cmpl	%ebp, %ecx
+		jbe	LeaveNow
+		subl	$0x00010000, %edx
+		js	LeaveNow
+LoopEntry:	movzwl	-1(%esi,%ecx), %eax
+		cmpl	%ebx, %eax
+		jnz	LookupLoop
+		movl	window(%esp), %eax
+		movzwl	(%eax,%ecx), %eax
+		cmpl	scanstart(%esp), %eax
+		jnz	LookupLoop
+
+/* Store the current value of chainlen.					*/
+
+		movl	%edx, chainlenwmask(%esp)
+
+/* Point %edi to the string under scrutiny, and %esi to the string we	*/
+/* are hoping to match it up with. In actuality, %esi and %edi are	*/
+/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is	*/
+/* initialized to -(MAX_MATCH_8 - scanalign).				*/
+
+		movl	window(%esp), %esi
+		movl	scan(%esp), %edi
+		addl	%ecx, %esi
+		movl	scanalign(%esp), %eax
+		movl	$(-MAX_MATCH_8), %edx
+		lea	MAX_MATCH_8(%edi,%eax), %edi
+		lea	MAX_MATCH_8(%esi,%eax), %esi
+
+/* Test the strings for equality, 8 bytes at a time. At the end,
+ * adjust %edx so that it is offset to the exact byte that mismatched.
+ *
+ * We already know at this point that the first three bytes of the
+ * strings match each other, and they can be safely passed over before
+ * starting the compare loop. So what this code does is skip over 0-3
+ * bytes, as much as necessary in order to dword-align the %edi
+ * pointer. (%esi will still be misaligned three times out of four.)
+ *
+ * It should be confessed that this loop usually does not represent
+ * much of the total running time. Replacing it with a more
+ * straightforward "rep cmpsb" would not drastically degrade
+ * performance.
+ */
+LoopCmps:
+		movl	(%esi,%edx), %eax
+		xorl	(%edi,%edx), %eax
+		jnz	LeaveLoopCmps
+		movl	4(%esi,%edx), %eax
+		xorl	4(%edi,%edx), %eax
+		jnz	LeaveLoopCmps4
+		addl	$8, %edx
+		jnz	LoopCmps
+		jmp	LenMaximum
+LeaveLoopCmps4:	addl	$4, %edx
+LeaveLoopCmps:	testl	$0x0000FFFF, %eax
+		jnz	LenLower
+		addl	$2, %edx
+		shrl	$16, %eax
+LenLower:	subb	$1, %al
+		adcl	$0, %edx
+
+/* Calculate the length of the match. If it is longer than MAX_MATCH,	*/
+/* then automatically accept it as the best possible match and leave.	*/
+
+		lea	(%edi,%edx), %eax
+		movl	scan(%esp), %edi
+		subl	%edi, %eax
+		cmpl	$MAX_MATCH, %eax
+		jge	LenMaximum
+
+/* If the length of the match is not longer than the best match we	*/
+/* have so far, then forget it and return to the lookup loop.		*/
+
+		movl	deflatestate(%esp), %edx
+		movl	bestlen(%esp), %ebx
+		cmpl	%ebx, %eax
+		jg	LongerMatch
+		movl	windowbestlen(%esp), %esi
+		movl	dsPrev(%edx), %edi
+		movl	scanend(%esp), %ebx
+		movl	chainlenwmask(%esp), %edx
+		jmp	LookupLoop
+
+/*         s->match_start = cur_match;					*/
+/*         best_len = len;						*/
+/*         if (len >= nice_match) break;				*/
+/*         scan_end = *(ushf*)(scan+best_len-1);			*/
+
+LongerMatch:	movl	nicematch(%esp), %ebx
+		movl	%eax, bestlen(%esp)
+		movl	%ecx, dsMatchStart(%edx)
+		cmpl	%ebx, %eax
+		jge	LeaveNow
+		movl	window(%esp), %esi
+		addl	%eax, %esi
+		movl	%esi, windowbestlen(%esp)
+		movzwl	-1(%edi,%eax), %ebx
+		movl	dsPrev(%edx), %edi
+		movl	%ebx, scanend(%esp)
+		movl	chainlenwmask(%esp), %edx
+		jmp	LookupLoop
+
+/* Accept the current string, with the maximum possible length.		*/
+
+LenMaximum:	movl	deflatestate(%esp), %edx
+		movl	$MAX_MATCH, bestlen(%esp)
+		movl	%ecx, dsMatchStart(%edx)
+
+/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len;		*/
+/* return s->lookahead;							*/
+
+LeaveNow:
+		movl	deflatestate(%esp), %edx
+		movl	bestlen(%esp), %ebx
+		movl	dsLookahead(%edx), %eax
+		cmpl	%eax, %ebx
+		jg	LookaheadRet
+		movl	%ebx, %eax
+LookaheadRet:
+
+/* Restore the stack and return from whence we came.			*/
+
+		addl	$LocalVarsSize, %esp
+		popl	%ebx
+		popl	%esi
+		popl	%edi
+		popl	%ebp
+match_init:	ret

contrib/delphi/zlib.mak

@@ -0,0 +1,36 @@
+# Makefile for zlib32bd.lib
+# ------------- Borland C++ 4.5 -------------
+
+# The (32-bit) zlib32bd.lib made with this makefile is intended for use 
+# in making the (32-bit) DLL, png32bd.dll. It uses the "stdcall" calling 
+# convention.
+
+CFLAGS= -ps -O2 -C -K -N- -k- -d -3 -r- -w-par -w-aus -WDE
+CC=f:\bc45\bin\bcc32
+LIBFLAGS= /C
+LIB=f:\bc45\bin\tlib
+ZLIB=zlib32bd.lib
+
+.autodepend
+.c.obj:
+        $(CC) -c $(CFLAGS) $<
+
+OBJ1=adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infblock.obj 
+OBJ2=infcodes.obj inflate.obj inftrees.obj infutil.obj inffast.obj 
+OBJ3=trees.obj uncompr.obj zutil.obj
+pOBJ1=+adler32.obj+compress.obj+crc32.obj+deflate.obj+gzio.obj+infblock.obj 
+pOBJ2=+infcodes.obj+inflate.obj+inftrees.obj+infutil.obj+inffast.obj 
+pOBJ3=+trees.obj+uncompr.obj+zutil.obj
+
+all: $(ZLIB)
+
+$(ZLIB): $(OBJ1) $(OBJ2) $(OBJ3)
+        @if exist $@ del $@
+        $(LIB) @&&|
+$@ $(LIBFLAGS) &
+$(pOBJ1) &
+$(pOBJ2) &
+$(pOBJ3)
+|
+
+# End of makefile for zlib32bd.lib

contrib/delphi/zlibdef.pas

@@ -0,0 +1,169 @@
+unit zlibdef;
+
+interface
+
+uses
+  Windows;
+
+const
+  ZLIB_VERSION = '1.1.3';
+
+type
+  voidpf = Pointer;
+  int    = Integer;
+  uInt   = Cardinal;
+  pBytef = PChar;
+  uLong  = Cardinal;
+
+  alloc_func = function(opaque: voidpf; items, size: uInt): voidpf;
+                    stdcall;
+  free_func  = procedure(opaque, address: voidpf);
+                    stdcall;
+
+  internal_state = Pointer;
+
+  z_streamp = ^z_stream;
+  z_stream = packed record
+    next_in: pBytef;          // next input byte
+    avail_in: uInt;           // number of bytes available at next_in
+    total_in: uLong;          // total nb of input bytes read so far
+
+    next_out: pBytef;         // next output byte should be put there
+    avail_out: uInt;          // remaining free space at next_out
+    total_out: uLong;         // total nb of bytes output so far
+
+    msg: PChar;               // last error message, NULL if no error
+    state: internal_state;    // not visible by applications
+
+    zalloc: alloc_func;       // used to allocate the internal state
+    zfree: free_func;         // used to free the internal state
+    opaque: voidpf;           // private data object passed to zalloc and zfree
+
+    data_type: int;           // best guess about the data type: ascii or binary
+    adler: uLong;             // adler32 value of the uncompressed data
+    reserved: uLong;          // reserved for future use
+    end;
+
+const
+  Z_NO_FLUSH      = 0;
+  Z_SYNC_FLUSH    = 2;
+  Z_FULL_FLUSH    = 3;
+  Z_FINISH        = 4;
+
+  Z_OK            = 0;
+  Z_STREAM_END    = 1;
+
+  Z_NO_COMPRESSION         =  0;
+  Z_BEST_SPEED             =  1;
+  Z_BEST_COMPRESSION       =  9;
+  Z_DEFAULT_COMPRESSION    = -1;
+
+  Z_FILTERED            = 1;
+  Z_HUFFMAN_ONLY        = 2;
+  Z_DEFAULT_STRATEGY    = 0;
+
+  Z_BINARY   = 0;
+  Z_ASCII    = 1;
+  Z_UNKNOWN  = 2;
+
+  Z_DEFLATED    = 8;
+
+  MAX_MEM_LEVEL = 9;
+
+function adler32(adler: uLong; const buf: pBytef; len: uInt): uLong;
+             stdcall;
+function crc32(crc: uLong; const buf: pBytef; len: uInt): uLong;
+             stdcall;
+function deflate(strm: z_streamp; flush: int): int;
+             stdcall;
+function deflateCopy(dest, source: z_streamp): int;
+             stdcall;
+function deflateEnd(strm: z_streamp): int;
+             stdcall;
+function deflateInit2_(strm: z_streamp; level, method,
+                       windowBits, memLevel, strategy: int;
+                       const version: PChar; stream_size: int): int;
+             stdcall;
+function deflateInit_(strm: z_streamp; level: int;
+                      const version: PChar; stream_size: int): int;
+             stdcall;
+function deflateParams(strm: z_streamp; level, strategy: int): int;
+             stdcall;
+function deflateReset(strm: z_streamp): int;
+             stdcall;
+function deflateSetDictionary(strm: z_streamp;
+                              const dictionary: pBytef;
+                              dictLength: uInt): int;
+             stdcall;
+function inflate(strm: z_streamp; flush: int): int;
+             stdcall;
+function inflateEnd(strm: z_streamp): int;
+             stdcall;
+function inflateInit2_(strm: z_streamp; windowBits: int;
+                       const version: PChar; stream_size: int): int;
+             stdcall;
+function inflateInit_(strm: z_streamp; const version: PChar;
+                      stream_size: int): int;
+             stdcall;
+function inflateReset(strm: z_streamp): int;
+             stdcall;
+function inflateSetDictionary(strm: z_streamp;
+                              const dictionary: pBytef;
+                              dictLength: uInt): int;
+             stdcall;
+function inflateSync(strm: z_streamp): int;
+             stdcall;
+
+function deflateInit(strm: z_streamp; level: int): int;
+function deflateInit2(strm: z_streamp; level, method, windowBits,
+                      memLevel, strategy: int): int;
+function inflateInit(strm: z_streamp): int;
+function inflateInit2(strm: z_streamp; windowBits: int): int;
+
+implementation
+
+function deflateInit(strm: z_streamp; level: int): int;
+begin
+  Result := deflateInit_(strm, level, ZLIB_VERSION, sizeof(z_stream));
+end;
+
+function deflateInit2(strm: z_streamp; level, method, windowBits,
+                      memLevel, strategy: int): int;
+begin
+  Result := deflateInit2_(strm, level, method, windowBits, memLevel,
+                          strategy, ZLIB_VERSION, sizeof(z_stream));
+end;
+
+function inflateInit(strm: z_streamp): int;
+begin
+  Result := inflateInit_(strm, ZLIB_VERSION, sizeof(z_stream));
+end;
+
+function inflateInit2(strm: z_streamp; windowBits: int): int;
+begin
+  Result := inflateInit2_(strm, windowBits, ZLIB_VERSION,
+                          sizeof(z_stream));
+end;
+
+const
+  zlibDLL = 'png32bd.dll';
+
+function adler32; external zlibDLL;
+function crc32; external zlibDLL;
+function deflate; external zlibDLL;
+function deflateCopy; external zlibDLL;
+function deflateEnd; external zlibDLL;
+function deflateInit2_; external zlibDLL;
+function deflateInit_; external zlibDLL;
+function deflateParams; external zlibDLL;
+function deflateReset; external zlibDLL;
+function deflateSetDictionary; external zlibDLL;
+function inflate; external zlibDLL;
+function inflateEnd; external zlibDLL;
+function inflateInit2_; external zlibDLL;
+function inflateInit_; external zlibDLL;
+function inflateReset; external zlibDLL;
+function inflateSetDictionary; external zlibDLL;
+function inflateSync; external zlibDLL;
+
+end.

contrib/delphi2/d_zlib.bpr

@@ -0,0 +1,224 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.03
+# ---------------------------------------------------------------------------
+PROJECT = d_zlib.lib
+OBJFILES = d_zlib.obj adler32.obj deflate.obj infblock.obj infcodes.obj inffast.obj \
+  inflate.obj inftrees.obj infutil.obj trees.obj
+RESFILES =
+RESDEPEN = $(RESFILES)
+LIBFILES =
+LIBRARIES = VCL35.lib
+SPARELIBS = VCL35.lib
+DEFFILE =
+PACKAGES = VCLX35.bpi VCL35.bpi VCLDB35.bpi VCLDBX35.bpi ibsmp35.bpi bcbsmp35.bpi \
+  dclocx35.bpi QRPT35.bpi TEEUI35.bpi TEEDB35.bpi TEE35.bpi DSS35.bpi \
+  NMFAST35.bpi INETDB35.bpi INET35.bpi VCLMID35.bpi
+# ---------------------------------------------------------------------------
+PATHCPP = .;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+# ---------------------------------------------------------------------------
+CFLAG1 = -O2 -Ve -d -k- -vi
+CFLAG2 = -I$(BCB)\include;$(BCB)\include\vcl -H=$(BCB)\lib\vcl35.csm
+CFLAG3 = -ff -pr -5
+PFLAGS = -U;$(DEBUGLIBPATH) -I$(BCB)\include;$(BCB)\include\vcl -H -W -$I- -v -JPHN -M
+RFLAGS = -i$(BCB)\include;$(BCB)\include\vcl 
+AFLAGS = /i$(BCB)\include /i$(BCB)\include\vcl /mx /w2 /zn
+LFLAGS =
+IFLAGS = -g -Gn
+# ---------------------------------------------------------------------------
+ALLOBJ = c0w32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cp32mt.lib
+# ---------------------------------------------------------------------------
+!!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=2
+Item0=$(BCB)\include
+Item1=$(BCB)\include;$(BCB)\include\vcl
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib\obj;$(BCB)\lib
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+ ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = TLib
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=2
+Item0=$(BCB)\include;$(BCB)\include\vcl
+Item1=$(BCB)\include
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib\obj;$(BCB)\lib
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) $(IFLAGS) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
+# ---------------------------------------------------------------------------

contrib/delphi2/d_zlib.cpp

@@ -0,0 +1,17 @@
+#include <condefs.h>
+#pragma hdrstop
+//---------------------------------------------------------------------------
+USEUNIT("adler32.c");
+USEUNIT("deflate.c");
+USEUNIT("infblock.c");
+USEUNIT("infcodes.c");
+USEUNIT("inffast.c");
+USEUNIT("inflate.c");
+USEUNIT("inftrees.c");
+USEUNIT("infutil.c");
+USEUNIT("trees.c");
+//---------------------------------------------------------------------------
+#define Library
+
+// To add a file to the library use the Project menu 'Add to Project'.
+

contrib/delphi2/readme.txt

@@ -0,0 +1,17 @@
+These are files used to compile zlib under Borland C++ Builder 3.
+
+zlib.bpg is the main project group that can be loaded in the BCB IDE and
+loads all other *.bpr projects
+
+zlib.bpr is a project used to create a static zlib.lib library with C calling
+convention for functions.
+
+zlib32.bpr creates a zlib32.dll dynamic link library with Windows standard
+calling convention.
+
+d_zlib.bpr creates a set of .obj files with register calling convention.
+These files are used by zlib.pas to create a Delphi unit containing zlib.
+The d_zlib.lib file generated isn't useful and can be deleted.
+
+zlib.cpp, zlib32.cpp and d_zlib.cpp are used by the above projects.
+

contrib/delphi2/zlib.bpg

@@ -0,0 +1,26 @@
+#------------------------------------------------------------------------------
+VERSION = BWS.01
+#------------------------------------------------------------------------------
+!ifndef ROOT
+ROOT = $(MAKEDIR)\..
+!endif
+#------------------------------------------------------------------------------
+MAKE = $(ROOT)\bin\make.exe -$(MAKEFLAGS) -f$**
+DCC = $(ROOT)\bin\dcc32.exe $**
+BRCC = $(ROOT)\bin\brcc32.exe $**
+#------------------------------------------------------------------------------
+PROJECTS = zlib zlib32 d_zlib
+#------------------------------------------------------------------------------
+default: $(PROJECTS)
+#------------------------------------------------------------------------------
+
+zlib: zlib.bpr
+  $(MAKE)
+
+zlib32: zlib32.bpr
+  $(MAKE)
+
+d_zlib: d_zlib.bpr
+  $(MAKE)
+
+

contrib/delphi2/zlib.bpr

@@ -0,0 +1,225 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.03
+# ---------------------------------------------------------------------------
+PROJECT = zlib.lib
+OBJFILES = zlib.obj adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infblock.obj \
+  infcodes.obj inffast.obj inflate.obj inftrees.obj infutil.obj trees.obj \
+  uncompr.obj zutil.obj
+RESFILES =
+RESDEPEN = $(RESFILES)
+LIBFILES =
+LIBRARIES = VCL35.lib
+SPARELIBS = VCL35.lib
+DEFFILE =
+PACKAGES = VCLX35.bpi VCL35.bpi VCLDB35.bpi VCLDBX35.bpi ibsmp35.bpi bcbsmp35.bpi \
+  dclocx35.bpi QRPT35.bpi TEEUI35.bpi TEEDB35.bpi TEE35.bpi DSS35.bpi \
+  NMFAST35.bpi INETDB35.bpi INET35.bpi VCLMID35.bpi
+# ---------------------------------------------------------------------------
+PATHCPP = .;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+# ---------------------------------------------------------------------------
+CFLAG1 = -O2 -Ve -d -k- -vi
+CFLAG2 = -I$(BCB)\include;$(BCB)\include\vcl -H=$(BCB)\lib\vcl35.csm
+CFLAG3 = -ff -5
+PFLAGS = -U;$(DEBUGLIBPATH) -I$(BCB)\include;$(BCB)\include\vcl -H -W -$I- -v -JPHN -M
+RFLAGS = -i$(BCB)\include;$(BCB)\include\vcl 
+AFLAGS = /i$(BCB)\include /i$(BCB)\include\vcl /mx /w2 /zn
+LFLAGS =
+IFLAGS = -g -Gn
+# ---------------------------------------------------------------------------
+ALLOBJ = c0w32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cp32mt.lib
+# ---------------------------------------------------------------------------
+!!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=2
+Item0=$(BCB)\include
+Item1=$(BCB)\include;$(BCB)\include\vcl
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib\obj;$(BCB)\lib
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+ ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = TLib
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=2
+Item0=$(BCB)\include;$(BCB)\include\vcl
+Item1=$(BCB)\include
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib\obj;$(BCB)\lib
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) $(IFLAGS) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
+# ---------------------------------------------------------------------------

contrib/delphi2/zlib.cpp

@@ -0,0 +1,22 @@
+#include <condefs.h>
+#pragma hdrstop
+//---------------------------------------------------------------------------
+USEUNIT("adler32.c");
+USEUNIT("compress.c");
+USEUNIT("crc32.c");
+USEUNIT("deflate.c");
+USEUNIT("gzio.c");
+USEUNIT("infblock.c");
+USEUNIT("infcodes.c");
+USEUNIT("inffast.c");
+USEUNIT("inflate.c");
+USEUNIT("inftrees.c");
+USEUNIT("infutil.c");
+USEUNIT("trees.c");
+USEUNIT("uncompr.c");
+USEUNIT("zutil.c");
+//---------------------------------------------------------------------------
+#define Library
+
+// To add a file to the library use the Project menu 'Add to Project'.
+

contrib/delphi2/zlib.pas

@@ -0,0 +1,534 @@
+{*******************************************************}
+{                                                       }
+{       Delphi Supplemental Components                  }
+{       ZLIB Data Compression Interface Unit            }
+{                                                       }
+{       Copyright (c) 1997 Borland International        }
+{                                                       }
+{*******************************************************}
+
+{ Modified for zlib 1.1.3 by Davide Moretti <dave@rimini.com }
+
+unit zlib;
+
+interface
+
+uses Sysutils, Classes;
+
+type
+  TAlloc = function (AppData: Pointer; Items, Size: Integer): Pointer;
+  TFree = procedure (AppData, Block: Pointer);
+
+  // Internal structure.  Ignore.
+  TZStreamRec = packed record
+    next_in: PChar;       // next input byte
+    avail_in: Integer;    // number of bytes available at next_in
+    total_in: Integer;    // total nb of input bytes read so far
+
+    next_out: PChar;      // next output byte should be put here
+    avail_out: Integer;   // remaining free space at next_out
+    total_out: Integer;   // total nb of bytes output so far
+
+    msg: PChar;           // last error message, NULL if no error
+    internal: Pointer;    // not visible by applications
+
+    zalloc: TAlloc;       // used to allocate the internal state
+    zfree: TFree;         // used to free the internal state
+    AppData: Pointer;     // private data object passed to zalloc and zfree
+
+    data_type: Integer;   //  best guess about the data type: ascii or binary
+    adler: Integer;       // adler32 value of the uncompressed data
+    reserved: Integer;    // reserved for future use
+  end;
+
+  // Abstract ancestor class
+  TCustomZlibStream = class(TStream)
+  private
+    FStrm: TStream;
+    FStrmPos: Integer;
+    FOnProgress: TNotifyEvent;
+    FZRec: TZStreamRec;
+    FBuffer: array [Word] of Char;
+  protected
+    procedure Progress(Sender: TObject); dynamic;
+    property OnProgress: TNotifyEvent read FOnProgress write FOnProgress;
+    constructor Create(Strm: TStream);
+  end;
+
+{ TCompressionStream compresses data on the fly as data is written to it, and
+  stores the compressed data to another stream.
+
+  TCompressionStream is write-only and strictly sequential. Reading from the
+  stream will raise an exception. Using Seek to move the stream pointer
+  will raise an exception.
+
+  Output data is cached internally, written to the output stream only when
+  the internal output buffer is full.  All pending output data is flushed
+  when the stream is destroyed.
+
+  The Position property returns the number of uncompressed bytes of
+  data that have been written to the stream so far.
+
+  CompressionRate returns the on-the-fly percentage by which the original
+  data has been compressed:  (1 - (CompressedBytes / UncompressedBytes)) * 100
+  If raw data size = 100 and compressed data size = 25, the CompressionRate
+  is 75%
+
+  The OnProgress event is called each time the output buffer is filled and
+  written to the output stream.  This is useful for updating a progress
+  indicator when you are writing a large chunk of data to the compression
+  stream in a single call.}
+
+
+  TCompressionLevel = (clNone, clFastest, clDefault, clMax);
+
+  TCompressionStream = class(TCustomZlibStream)
+  private
+    function GetCompressionRate: Single;
+  public
+    constructor Create(CompressionLevel: TCompressionLevel; Dest: TStream);
+    destructor Destroy; override;
+    function Read(var Buffer; Count: Longint): Longint; override;
+    function Write(const Buffer; Count: Longint): Longint; override;
+    function Seek(Offset: Longint; Origin: Word): Longint; override;
+    property CompressionRate: Single read GetCompressionRate;
+    property OnProgress;
+  end;
+
+{ TDecompressionStream decompresses data on the fly as data is read from it.
+
+  Compressed data comes from a separate source stream.  TDecompressionStream
+  is read-only and unidirectional; you can seek forward in the stream, but not
+  backwards.  The special case of setting the stream position to zero is
+  allowed.  Seeking forward decompresses data until the requested position in
+  the uncompressed data has been reached.  Seeking backwards, seeking relative
+  to the end of the stream, requesting the size of the stream, and writing to
+  the stream will raise an exception.
+
+  The Position property returns the number of bytes of uncompressed data that
+  have been read from the stream so far.
+
+  The OnProgress event is called each time the internal input buffer of
+  compressed data is exhausted and the next block is read from the input stream.
+  This is useful for updating a progress indicator when you are reading a
+  large chunk of data from the decompression stream in a single call.}
+
+  TDecompressionStream = class(TCustomZlibStream)
+  public
+    constructor Create(Source: TStream);
+    destructor Destroy; override;
+    function Read(var Buffer; Count: Longint): Longint; override;
+    function Write(const Buffer; Count: Longint): Longint; override;
+    function Seek(Offset: Longint; Origin: Word): Longint; override;
+    property OnProgress;
+  end;
+
+
+
+{ CompressBuf compresses data, buffer to buffer, in one call.
+   In: InBuf = ptr to compressed data
+       InBytes = number of bytes in InBuf
+  Out: OutBuf = ptr to newly allocated buffer containing decompressed data
+       OutBytes = number of bytes in OutBuf   }
+procedure CompressBuf(const InBuf: Pointer; InBytes: Integer;
+                      out OutBuf: Pointer; out OutBytes: Integer);
+
+
+{ DecompressBuf decompresses data, buffer to buffer, in one call.
+   In: InBuf = ptr to compressed data
+       InBytes = number of bytes in InBuf
+       OutEstimate = zero, or est. size of the decompressed data
+  Out: OutBuf = ptr to newly allocated buffer containing decompressed data
+       OutBytes = number of bytes in OutBuf   }
+procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer;
+ OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer);
+
+const
+  zlib_version = '1.1.3';
+
+type
+  EZlibError = class(Exception);
+  ECompressionError = class(EZlibError);
+  EDecompressionError = class(EZlibError);
+
+function adler32(adler: Integer; buf: PChar; len: Integer): Integer;
+
+implementation
+
+const
+  Z_NO_FLUSH      = 0;
+  Z_PARTIAL_FLUSH = 1;
+  Z_SYNC_FLUSH    = 2;
+  Z_FULL_FLUSH    = 3;
+  Z_FINISH        = 4;
+
+  Z_OK            = 0;
+  Z_STREAM_END    = 1;
+  Z_NEED_DICT     = 2;
+  Z_ERRNO         = (-1);
+  Z_STREAM_ERROR  = (-2);
+  Z_DATA_ERROR    = (-3);
+  Z_MEM_ERROR     = (-4);
+  Z_BUF_ERROR     = (-5);
+  Z_VERSION_ERROR = (-6);
+
+  Z_NO_COMPRESSION       =   0;
+  Z_BEST_SPEED           =   1;
+  Z_BEST_COMPRESSION     =   9;
+  Z_DEFAULT_COMPRESSION  = (-1);
+
+  Z_FILTERED            = 1;
+  Z_HUFFMAN_ONLY        = 2;
+  Z_DEFAULT_STRATEGY    = 0;
+
+  Z_BINARY   = 0;
+  Z_ASCII    = 1;
+  Z_UNKNOWN  = 2;
+
+  Z_DEFLATED = 8;
+
+  _z_errmsg: array[0..9] of PChar = (
+    'need dictionary',      // Z_NEED_DICT      (2)
+    'stream end',           // Z_STREAM_END     (1)
+    '',                     // Z_OK             (0)
+    'file error',           // Z_ERRNO          (-1)
+    'stream error',         // Z_STREAM_ERROR   (-2)
+    'data error',           // Z_DATA_ERROR     (-3)
+    'insufficient memory',  // Z_MEM_ERROR      (-4)
+    'buffer error',         // Z_BUF_ERROR      (-5)
+    'incompatible version', // Z_VERSION_ERROR  (-6)
+    ''
+  );
+
+{$L deflate.obj}
+{$L inflate.obj}
+{$L inftrees.obj}
+{$L trees.obj}
+{$L adler32.obj}
+{$L infblock.obj}
+{$L infcodes.obj}
+{$L infutil.obj}
+{$L inffast.obj}
+
+procedure _tr_init; external;
+procedure _tr_tally; external;
+procedure _tr_flush_block; external;
+procedure _tr_align; external;
+procedure _tr_stored_block; external;
+function adler32; external;
+procedure inflate_blocks_new; external;
+procedure inflate_blocks; external;
+procedure inflate_blocks_reset; external;
+procedure inflate_blocks_free; external;
+procedure inflate_set_dictionary; external;
+procedure inflate_trees_bits; external;
+procedure inflate_trees_dynamic; external;
+procedure inflate_trees_fixed; external;
+procedure inflate_codes_new; external;
+procedure inflate_codes; external;
+procedure inflate_codes_free; external;
+procedure _inflate_mask; external;
+procedure inflate_flush; external;
+procedure inflate_fast; external;
+
+procedure _memset(P: Pointer; B: Byte; count: Integer);cdecl;
+begin
+  FillChar(P^, count, B);
+end;
+
+procedure _memcpy(dest, source: Pointer; count: Integer);cdecl;
+begin
+  Move(source^, dest^, count);
+end;
+
+
+
+// deflate compresses data
+function deflateInit_(var strm: TZStreamRec; level: Integer; version: PChar;
+  recsize: Integer): Integer; external;
+function deflate(var strm: TZStreamRec; flush: Integer): Integer; external;
+function deflateEnd(var strm: TZStreamRec): Integer; external;
+
+// inflate decompresses data
+function inflateInit_(var strm: TZStreamRec; version: PChar;
+  recsize: Integer): Integer; external;
+function inflate(var strm: TZStreamRec; flush: Integer): Integer; external;
+function inflateEnd(var strm: TZStreamRec): Integer; external;
+function inflateReset(var strm: TZStreamRec): Integer; external;
+
+
+function zcalloc(AppData: Pointer; Items, Size: Integer): Pointer;
+begin
+  GetMem(Result, Items*Size);
+end;
+
+procedure zcfree(AppData, Block: Pointer);
+begin
+  FreeMem(Block);
+end;
+
+function zlibCheck(code: Integer): Integer;
+begin
+  Result := code;
+  if code < 0 then
+    raise EZlibError.Create('error');    //!!
+end;
+
+function CCheck(code: Integer): Integer;
+begin
+  Result := code;
+  if code < 0 then
+    raise ECompressionError.Create('error'); //!!
+end;
+
+function DCheck(code: Integer): Integer;
+begin
+  Result := code;
+  if code < 0 then
+    raise EDecompressionError.Create('error');  //!!
+end;
+
+procedure CompressBuf(const InBuf: Pointer; InBytes: Integer;
+                      out OutBuf: Pointer; out OutBytes: Integer);
+var
+  strm: TZStreamRec;
+  P: Pointer;
+begin
+  FillChar(strm, sizeof(strm), 0);
+  OutBytes := ((InBytes + (InBytes div 10) + 12) + 255) and not 255;
+  GetMem(OutBuf, OutBytes);
+  try
+    strm.next_in := InBuf;
+    strm.avail_in := InBytes;
+    strm.next_out := OutBuf;
+    strm.avail_out := OutBytes;
+    CCheck(deflateInit_(strm, Z_BEST_COMPRESSION, zlib_version, sizeof(strm)));
+    try
+      while CCheck(deflate(strm, Z_FINISH)) <> Z_STREAM_END do
+      begin
+        P := OutBuf;
+        Inc(OutBytes, 256);
+        ReallocMem(OutBuf, OutBytes);
+        strm.next_out := PChar(Integer(OutBuf) + (Integer(strm.next_out) - Integer(P)));
+        strm.avail_out := 256;
+      end;
+    finally
+      CCheck(deflateEnd(strm));
+    end;
+    ReallocMem(OutBuf, strm.total_out);
+    OutBytes := strm.total_out;
+  except
+    FreeMem(OutBuf);
+    raise
+  end;
+end;
+
+
+procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer;
+  OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer);
+var
+  strm: TZStreamRec;
+  P: Pointer;
+  BufInc: Integer;
+begin
+  FillChar(strm, sizeof(strm), 0);
+  BufInc := (InBytes + 255) and not 255;
+  if OutEstimate = 0 then
+    OutBytes := BufInc
+  else
+    OutBytes := OutEstimate;
+  GetMem(OutBuf, OutBytes);
+  try
+    strm.next_in := InBuf;
+    strm.avail_in := InBytes;
+    strm.next_out := OutBuf;
+    strm.avail_out := OutBytes;
+    DCheck(inflateInit_(strm, zlib_version, sizeof(strm)));
+    try
+      while DCheck(inflate(strm, Z_FINISH)) <> Z_STREAM_END do
+      begin
+        P := OutBuf;
+        Inc(OutBytes, BufInc);
+        ReallocMem(OutBuf, OutBytes);
+        strm.next_out := PChar(Integer(OutBuf) + (Integer(strm.next_out) - Integer(P)));
+        strm.avail_out := BufInc;
+      end;
+    finally
+      DCheck(inflateEnd(strm));
+    end;
+    ReallocMem(OutBuf, strm.total_out);
+    OutBytes := strm.total_out;
+  except
+    FreeMem(OutBuf);
+    raise
+  end;
+end;
+
+
+// TCustomZlibStream
+
+constructor TCustomZLibStream.Create(Strm: TStream);
+begin
+  inherited Create;
+  FStrm := Strm;
+  FStrmPos := Strm.Position;
+end;
+
+procedure TCustomZLibStream.Progress(Sender: TObject);
+begin
+  if Assigned(FOnProgress) then FOnProgress(Sender);
+end;
+
+
+// TCompressionStream
+
+constructor TCompressionStream.Create(CompressionLevel: TCompressionLevel;
+  Dest: TStream);
+const
+  Levels: array [TCompressionLevel] of ShortInt =
+    (Z_NO_COMPRESSION, Z_BEST_SPEED, Z_DEFAULT_COMPRESSION, Z_BEST_COMPRESSION);
+begin
+  inherited Create(Dest);
+  FZRec.next_out := FBuffer;
+  FZRec.avail_out := sizeof(FBuffer);
+  CCheck(deflateInit_(FZRec, Levels[CompressionLevel], zlib_version, sizeof(FZRec)));
+end;
+
+destructor TCompressionStream.Destroy;
+begin
+  FZRec.next_in := nil;
+  FZRec.avail_in := 0;
+  try
+    if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
+    while (CCheck(deflate(FZRec, Z_FINISH)) <> Z_STREAM_END)
+      and (FZRec.avail_out = 0) do
+    begin
+      FStrm.WriteBuffer(FBuffer, sizeof(FBuffer));
+      FZRec.next_out := FBuffer;
+      FZRec.avail_out := sizeof(FBuffer);
+    end;
+    if FZRec.avail_out < sizeof(FBuffer) then
+      FStrm.WriteBuffer(FBuffer, sizeof(FBuffer) - FZRec.avail_out);
+  finally
+    deflateEnd(FZRec);
+  end;
+  inherited Destroy;
+end;
+
+function TCompressionStream.Read(var Buffer; Count: Longint): Longint;
+begin
+  raise ECompressionError.Create('Invalid stream operation');
+end;
+
+function TCompressionStream.Write(const Buffer; Count: Longint): Longint;
+begin
+  FZRec.next_in := @Buffer;
+  FZRec.avail_in := Count;
+  if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
+  while (FZRec.avail_in > 0) do
+  begin
+    CCheck(deflate(FZRec, 0));
+    if FZRec.avail_out = 0 then
+    begin
+      FStrm.WriteBuffer(FBuffer, sizeof(FBuffer));
+      FZRec.next_out := FBuffer;
+      FZRec.avail_out := sizeof(FBuffer);
+      FStrmPos := FStrm.Position;
+      Progress(Self);
+    end;
+  end;
+  Result := Count;
+end;
+
+function TCompressionStream.Seek(Offset: Longint; Origin: Word): Longint;
+begin
+  if (Offset = 0) and (Origin = soFromCurrent) then
+    Result := FZRec.total_in
+  else
+    raise ECompressionError.Create('Invalid stream operation');
+end;
+
+function TCompressionStream.GetCompressionRate: Single;
+begin
+  if FZRec.total_in = 0 then
+    Result := 0
+  else
+    Result := (1.0 - (FZRec.total_out / FZRec.total_in)) * 100.0;
+end;
+
+
+// TDecompressionStream
+
+constructor TDecompressionStream.Create(Source: TStream);
+begin
+  inherited Create(Source);
+  FZRec.next_in := FBuffer;
+  FZRec.avail_in := 0;
+  DCheck(inflateInit_(FZRec, zlib_version, sizeof(FZRec)));
+end;
+
+destructor TDecompressionStream.Destroy;
+begin
+  inflateEnd(FZRec);
+  inherited Destroy;
+end;
+
+function TDecompressionStream.Read(var Buffer; Count: Longint): Longint;
+begin
+  FZRec.next_out := @Buffer;
+  FZRec.avail_out := Count;
+  if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
+  while (FZRec.avail_out > 0) do
+  begin
+    if FZRec.avail_in = 0 then
+    begin
+      FZRec.avail_in := FStrm.Read(FBuffer, sizeof(FBuffer));
+      if FZRec.avail_in = 0 then
+        begin
+          Result := Count - FZRec.avail_out;
+          Exit;
+        end;
+      FZRec.next_in := FBuffer;
+      FStrmPos := FStrm.Position;
+      Progress(Self);
+    end;
+    DCheck(inflate(FZRec, 0));
+  end;
+  Result := Count;
+end;
+
+function TDecompressionStream.Write(const Buffer; Count: Longint): Longint;
+begin
+  raise EDecompressionError.Create('Invalid stream operation');
+end;
+
+function TDecompressionStream.Seek(Offset: Longint; Origin: Word): Longint;
+var
+  I: Integer;
+  Buf: array [0..4095] of Char;
+begin
+  if (Offset = 0) and (Origin = soFromBeginning) then
+  begin
+    DCheck(inflateReset(FZRec));
+    FZRec.next_in := FBuffer;
+    FZRec.avail_in := 0;
+    FStrm.Position := 0;
+    FStrmPos := 0;
+  end
+  else if ( (Offset >= 0) and (Origin = soFromCurrent)) or
+          ( ((Offset - FZRec.total_out) > 0) and (Origin = soFromBeginning)) then
+  begin
+    if Origin = soFromBeginning then Dec(Offset, FZRec.total_out);
+    if Offset > 0 then
+    begin
+      for I := 1 to Offset div sizeof(Buf) do
+        ReadBuffer(Buf, sizeof(Buf));
+      ReadBuffer(Buf, Offset mod sizeof(Buf));
+    end;
+  end
+  else
+    raise EDecompressionError.Create('Invalid stream operation');
+  Result := FZRec.total_out;
+end;
+
+end.

contrib/delphi2/zlib32.bpr

@@ -0,0 +1,174 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.03
+# ---------------------------------------------------------------------------
+PROJECT = zlib32.dll
+OBJFILES = zlib32.obj adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infblock.obj \
+  infcodes.obj inffast.obj inflate.obj inftrees.obj infutil.obj trees.obj \
+  uncompr.obj zutil.obj
+RESFILES =
+RESDEPEN = $(RESFILES)
+LIBFILES =
+LIBRARIES = 
+SPARELIBS = 
+DEFFILE =
+PACKAGES = VCLX35.bpi VCL35.bpi VCLDB35.bpi VCLDBX35.bpi ibsmp35.bpi bcbsmp35.bpi \
+  dclocx35.bpi QRPT35.bpi TEEUI35.bpi TEEDB35.bpi TEE35.bpi DSS35.bpi \
+  NMFAST35.bpi INETDB35.bpi INET35.bpi VCLMID35.bpi
+# ---------------------------------------------------------------------------
+PATHCPP = .;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+# ---------------------------------------------------------------------------
+CFLAG1 = -WD -O2 -Ve -d -k- -vi -c -tWD
+CFLAG2 = -D_NO_VCL;ZLIB_DLL -I$(BCB)\include
+CFLAG3 = -ff -5
+PFLAGS = -D_NO_VCL;ZLIB_DLL -U$(BCB)\lib;$(RELEASELIBPATH) -I$(BCB)\include -$I- -v \
+  -JPHN -M
+RFLAGS = -D_NO_VCL;ZLIB_DLL -i$(BCB)\include
+AFLAGS = /i$(BCB)\include /d_NO_VCL /dZLIB_DLL /mx /w2 /zn
+LFLAGS = -L$(BCB)\lib;$(RELEASELIBPATH) -aa -Tpd -x -Gi
+IFLAGS = -Gn -g
+# ---------------------------------------------------------------------------
+ALLOBJ = c0d32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES)  import32.lib cw32mt.lib
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=1
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=DLL (GUI)
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=1
+Item0=$(BCB)\include
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib
+
+[HistoryLists\hlConditionals]
+Count=1
+Item0=_NO_VCL;ZLIB_DLL
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) $(IFLAGS) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
+# ---------------------------------------------------------------------------

contrib/delphi2/zlib32.cpp

@@ -0,0 +1,42 @@
+
+#include <windows.h>
+#pragma hdrstop
+#include <condefs.h>
+
+
+//---------------------------------------------------------------------------
+//   Important note about DLL memory management in a VCL DLL:
+//
+//
+//
+// If your DLL uses VCL and exports any functions that pass VCL String objects
+// (or structs/classes containing nested Strings) as parameter or function
+// results, you will need to build both your DLL project and any EXE projects
+// that use your DLL with the dynamic RTL (the RTL DLL).  This will change your
+// DLL and its calling EXE's to use BORLNDMM.DLL as their memory manager. In
+// these cases, the file BORLNDMM.DLL should be deployed along with your DLL
+// and the RTL DLL (CP3240MT.DLL). To avoid the requiring BORLNDMM.DLL in
+// these situations, pass string information using "char *" or ShortString
+// parameters and then link with the static RTL.
+//
+//---------------------------------------------------------------------------
+USEUNIT("adler32.c");
+USEUNIT("compress.c");
+USEUNIT("crc32.c");
+USEUNIT("deflate.c");
+USEUNIT("gzio.c");
+USEUNIT("infblock.c");
+USEUNIT("infcodes.c");
+USEUNIT("inffast.c");
+USEUNIT("inflate.c");
+USEUNIT("inftrees.c");
+USEUNIT("infutil.c");
+USEUNIT("trees.c");
+USEUNIT("uncompr.c");
+USEUNIT("zutil.c");
+//---------------------------------------------------------------------------
+#pragma argsused
+int WINAPI DllEntryPoint(HINSTANCE hinst, unsigned long reason, void*)
+{
+        return 1;
+}

contrib/minizip/ChangeLogUnzip

@@ -0,0 +1,38 @@
+Change in 0.15: (19 Mar 98)
+- fix memory leak in minizip.c
+
+Change in 0.14: (10 Mar 98)
+- fix bugs in minizip.c sample for zipping big file
+- fix problem in month in date handling
+- fix bug in unzlocal_GetCurrentFileInfoInternal in unzip.c for 
+    comment handling
+
+Change in 0.13: (6 Mar 98)
+- fix bugs in zip.c
+- add real minizip sample
+
+Change in 0.12: (4 Mar 98)
+- add zip.c and zip.h for creates .zip file
+- fix change_file_date in miniunz.c for Unix (Jean-loup Gailly)
+- fix miniunz.c for file without specific record for directory
+
+Change in 0.11: (3 Mar 98)
+- fix bug in unzGetCurrentFileInfo for get extra field and comment
+- enhance miniunz sample, remove the bad unztst.c sample
+
+Change in 0.10: (2 Mar 98)
+- fix bug in unzReadCurrentFile
+- rename unzip* to unz* function and structure
+- remove Windows-like hungary notation variable name
+- modify some structure in unzip.h
+- add somes comment in source
+- remove unzipGetcCurrentFile function
+- replace ZUNZEXPORT by ZEXPORT
+- add unzGetLocalExtrafield for get the local extrafield info
+- add a new sample, miniunz.c
+
+Change in 0.4: (25 Feb 98)
+- suppress the type unzipFileInZip. 
+  Only on file in the zipfile can be open at the same time
+- fix somes typo in code
+- added tm_unz structure in unzip_file_info (date/time in readable format)

contrib/minizip/Makefile

@@ -0,0 +1,25 @@
+CC=cc
+CFLAGS=-O -I../..
+
+UNZ_OBJS = miniunz.o unzip.o ../../libz.a
+ZIP_OBJS = minizip.o zip.o   ../../libz.a
+
+.c.o:
+	$(CC) -c $(CFLAGS) $*.c
+
+all: miniunz minizip
+
+miniunz:  $(UNZ_OBJS)
+	$(CC) $(CFLAGS) -o $@ $(UNZ_OBJS)
+
+minizip:  $(ZIP_OBJS)
+	$(CC) $(CFLAGS) -o $@ $(ZIP_OBJS)
+
+test:	miniunz minizip
+	./minizip test readme.txt
+	./miniunz -l test.zip
+	mv readme.txt readme.old
+	./miniunz test.zip
+
+clean:
+	/bin/rm -f *.o *~ minizip miniunz

contrib/minizip/miniunz.c

@@ -0,0 +1,508 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <errno.h>
+#include <fcntl.h>
+
+#ifdef unix
+# include <unistd.h>
+# include <utime.h>
+#else
+# include <direct.h>
+# include <io.h>
+#endif
+
+#include "unzip.h"
+
+#define CASESENSITIVITY (0)
+#define WRITEBUFFERSIZE (8192)
+
+/*
+  mini unzip, demo of unzip package
+
+  usage :
+  Usage : miniunz [-exvlo] file.zip [file_to_extract]
+
+  list the file in the zipfile, and print the content of FILE_ID.ZIP or README.TXT
+    if it exists
+*/
+
+
+/* change_file_date : change the date/time of a file
+    filename : the filename of the file where date/time must be modified
+    dosdate : the new date at the MSDos format (4 bytes)
+    tmu_date : the SAME new date at the tm_unz format */
+void change_file_date(filename,dosdate,tmu_date)
+	const char *filename;
+	uLong dosdate;
+	tm_unz tmu_date;
+{
+#ifdef WIN32
+  HANDLE hFile;
+  FILETIME ftm,ftLocal,ftCreate,ftLastAcc,ftLastWrite;
+
+  hFile = CreateFile(filename,GENERIC_READ | GENERIC_WRITE,
+                      0,NULL,OPEN_EXISTING,0,NULL);
+  GetFileTime(hFile,&ftCreate,&ftLastAcc,&ftLastWrite);
+  DosDateTimeToFileTime((WORD)(dosdate>>16),(WORD)dosdate,&ftLocal);
+  LocalFileTimeToFileTime(&ftLocal,&ftm);
+  SetFileTime(hFile,&ftm,&ftLastAcc,&ftm);
+  CloseHandle(hFile);
+#else
+#ifdef unix
+  struct utimbuf ut;
+  struct tm newdate;
+  newdate.tm_sec = tmu_date.tm_sec;
+  newdate.tm_min=tmu_date.tm_min;
+  newdate.tm_hour=tmu_date.tm_hour;
+  newdate.tm_mday=tmu_date.tm_mday;
+  newdate.tm_mon=tmu_date.tm_mon;
+  if (tmu_date.tm_year > 1900)
+      newdate.tm_year=tmu_date.tm_year - 1900;
+  else
+      newdate.tm_year=tmu_date.tm_year ;
+  newdate.tm_isdst=-1;
+
+  ut.actime=ut.modtime=mktime(&newdate);
+  utime(filename,&ut);
+#endif
+#endif
+}
+
+
+/* mymkdir and change_file_date are not 100 % portable
+   As I don't know well Unix, I wait feedback for the unix portion */
+
+int mymkdir(dirname)
+	const char* dirname;
+{
+    int ret=0;
+#ifdef WIN32
+	ret = mkdir(dirname);
+#else
+#ifdef unix
+	ret = mkdir (dirname,0775);
+#endif
+#endif
+	return ret;
+}
+
+int makedir (newdir)
+    char *newdir;
+{
+  char *buffer ;
+  char *p;
+  int  len = strlen(newdir);  
+
+  if (len <= 0) 
+    return 0;
+
+  buffer = (char*)malloc(len+1);
+  strcpy(buffer,newdir);
+  
+  if (buffer[len-1] == '/') {
+    buffer[len-1] = '\0';
+  }
+  if (mymkdir(buffer) == 0)
+    {
+      free(buffer);
+      return 1;
+    }
+
+  p = buffer+1;
+  while (1)
+    {
+      char hold;
+
+      while(*p && *p != '\\' && *p != '/')
+        p++;
+      hold = *p;
+      *p = 0;
+      if ((mymkdir(buffer) == -1) && (errno == ENOENT))
+        {
+          printf("couldn't create directory %s\n",buffer);
+          free(buffer);
+          return 0;
+        }
+      if (hold == 0)
+        break;
+      *p++ = hold;
+    }
+  free(buffer);
+  return 1;
+}
+
+void do_banner()
+{
+	printf("MiniUnz 0.15, demo of zLib + Unz package written by Gilles Vollant\n");
+	printf("more info at http://wwww.winimage/zLibDll/unzip.htm\n\n");
+}
+
+void do_help()
+{	
+	printf("Usage : miniunz [-exvlo] file.zip [file_to_extract]\n\n") ;
+}
+
+
+int do_list(uf)
+	unzFile uf;
+{
+	uLong i;
+	unz_global_info gi;
+	int err;
+
+	err = unzGetGlobalInfo (uf,&gi);
+	if (err!=UNZ_OK)
+		printf("error %d with zipfile in unzGetGlobalInfo \n",err);
+    printf(" Length  Method   Size  Ratio   Date    Time   CRC-32     Name\n");
+    printf(" ------  ------   ----  -----   ----    ----   ------     ----\n");
+	for (i=0;i<gi.number_entry;i++)
+	{
+		char filename_inzip[256];
+		unz_file_info file_info;
+		uLong ratio=0;
+		const char *string_method;
+		err = unzGetCurrentFileInfo(uf,&file_info,filename_inzip,sizeof(filename_inzip),NULL,0,NULL,0);
+		if (err!=UNZ_OK)
+		{
+			printf("error %d with zipfile in unzGetCurrentFileInfo\n",err);
+			break;
+		}
+		if (file_info.uncompressed_size>0)
+			ratio = (file_info.compressed_size*100)/file_info.uncompressed_size;
+
+		if (file_info.compression_method==0)
+			string_method="Stored";
+		else
+		if (file_info.compression_method==Z_DEFLATED)
+		{
+			uInt iLevel=(uInt)((file_info.flag & 0x6)/2);
+			if (iLevel==0)
+			  string_method="Defl:N";
+			else if (iLevel==1)
+			  string_method="Defl:X";
+			else if ((iLevel==2) || (iLevel==3))
+			  string_method="Defl:F"; /* 2:fast , 3 : extra fast*/
+		}
+		else
+			string_method="Unkn. ";
+
+		printf("%7lu  %6s %7lu %3lu%%  %2.2lu-%2.2lu-%2.2lu  %2.2lu:%2.2lu  %8.8lx   %s\n",
+			    file_info.uncompressed_size,string_method,file_info.compressed_size,
+				ratio,
+				(uLong)file_info.tmu_date.tm_mon + 1,
+                (uLong)file_info.tmu_date.tm_mday,
+				(uLong)file_info.tmu_date.tm_year % 100,
+				(uLong)file_info.tmu_date.tm_hour,(uLong)file_info.tmu_date.tm_min,
+				(uLong)file_info.crc,filename_inzip);
+		if ((i+1)<gi.number_entry)
+		{
+			err = unzGoToNextFile(uf);
+			if (err!=UNZ_OK)
+			{
+				printf("error %d with zipfile in unzGoToNextFile\n",err);
+				break;
+			}
+		}
+	}
+
+	return 0;
+}
+
+
+int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite)
+	unzFile uf;
+	const int* popt_extract_without_path;
+    int* popt_overwrite;
+{
+	char filename_inzip[256];
+	char* filename_withoutpath;
+	char* p;
+    int err=UNZ_OK;
+    FILE *fout=NULL;
+    void* buf;
+    uInt size_buf;
+	
+	unz_file_info file_info;
+	uLong ratio=0;
+	err = unzGetCurrentFileInfo(uf,&file_info,filename_inzip,sizeof(filename_inzip),NULL,0,NULL,0);
+
+	if (err!=UNZ_OK)
+	{
+		printf("error %d with zipfile in unzGetCurrentFileInfo\n",err);
+		return err;
+	}
+
+    size_buf = WRITEBUFFERSIZE;
+    buf = (void*)malloc(size_buf);
+    if (buf==NULL)
+    {
+        printf("Error allocating memory\n");
+        return UNZ_INTERNALERROR;
+    }
+
+	p = filename_withoutpath = filename_inzip;
+	while ((*p) != '\0')
+	{
+		if (((*p)=='/') || ((*p)=='\\'))
+			filename_withoutpath = p+1;
+		p++;
+	}
+
+	if ((*filename_withoutpath)=='\0')
+	{
+		if ((*popt_extract_without_path)==0)
+		{
+			printf("creating directory: %s\n",filename_inzip);
+			mymkdir(filename_inzip);
+		}
+	}
+	else
+	{
+		const char* write_filename;
+		int skip=0;
+
+		if ((*popt_extract_without_path)==0)
+			write_filename = filename_inzip;
+		else
+			write_filename = filename_withoutpath;
+
+		err = unzOpenCurrentFile(uf);
+		if (err!=UNZ_OK)
+		{
+			printf("error %d with zipfile in unzOpenCurrentFile\n",err);
+		}
+
+		if (((*popt_overwrite)==0) && (err==UNZ_OK))
+		{
+			char rep;
+			FILE* ftestexist;
+			ftestexist = fopen(write_filename,"rb");
+			if (ftestexist!=NULL)
+			{
+				fclose(ftestexist);
+				do
+				{
+					char answer[128];
+					printf("The file %s exist. Overwrite ? [y]es, [n]o, [A]ll: ",write_filename);
+					scanf("%1s",answer);
+					rep = answer[0] ;
+					if ((rep>='a') && (rep<='z'))
+						rep -= 0x20;
+				}
+				while ((rep!='Y') && (rep!='N') && (rep!='A'));
+			}
+
+			if (rep == 'N')
+				skip = 1;
+
+			if (rep == 'A')
+				*popt_overwrite=1;
+		}
+
+		if ((skip==0) && (err==UNZ_OK))
+		{
+			fout=fopen(write_filename,"wb");
+
+            /* some zipfile don't contain directory alone before file */
+            if ((fout==NULL) && ((*popt_extract_without_path)==0) && 
+                                (filename_withoutpath!=(char*)filename_inzip))
+            {
+                char c=*(filename_withoutpath-1);
+                *(filename_withoutpath-1)='\0';
+                makedir(write_filename);
+                *(filename_withoutpath-1)=c;
+                fout=fopen(write_filename,"wb");
+            }
+
+			if (fout==NULL)
+			{
+				printf("error opening %s\n",write_filename);
+			}
+		}
+
+		if (fout!=NULL)
+		{
+			printf(" extracting: %s\n",write_filename);
+
+			do
+			{
+				err = unzReadCurrentFile(uf,buf,size_buf);
+				if (err<0)	
+				{
+					printf("error %d with zipfile in unzReadCurrentFile\n",err);
+					break;
+				}
+				if (err>0)
+					if (fwrite(buf,err,1,fout)!=1)
+					{
+						printf("error in writing extracted file\n");
+                        err=UNZ_ERRNO;
+						break;
+					}
+			}
+			while (err>0);
+			fclose(fout);
+			if (err==0) 
+				change_file_date(write_filename,file_info.dosDate,
+					             file_info.tmu_date);
+		}
+
+        if (err==UNZ_OK)
+        {
+		    err = unzCloseCurrentFile (uf);
+		    if (err!=UNZ_OK)
+		    {
+			    printf("error %d with zipfile in unzCloseCurrentFile\n",err);
+		    }
+        }
+        else
+            unzCloseCurrentFile(uf); /* don't lose the error */       
+	}
+
+    free(buf);    
+    return err;
+}
+
+
+int do_extract(uf,opt_extract_without_path,opt_overwrite)
+	unzFile uf;
+	int opt_extract_without_path;
+    int opt_overwrite;
+{
+	uLong i;
+	unz_global_info gi;
+	int err;
+	FILE* fout=NULL;	
+
+	err = unzGetGlobalInfo (uf,&gi);
+	if (err!=UNZ_OK)
+		printf("error %d with zipfile in unzGetGlobalInfo \n",err);
+
+	for (i=0;i<gi.number_entry;i++)
+	{
+        if (do_extract_currentfile(uf,&opt_extract_without_path,
+                                      &opt_overwrite) != UNZ_OK)
+            break;
+
+		if ((i+1)<gi.number_entry)
+		{
+			err = unzGoToNextFile(uf);
+			if (err!=UNZ_OK)
+			{
+				printf("error %d with zipfile in unzGoToNextFile\n",err);
+				break;
+			}
+		}
+	}
+
+	return 0;
+}
+
+int do_extract_onefile(uf,filename,opt_extract_without_path,opt_overwrite)
+	unzFile uf;
+	const char* filename;
+	int opt_extract_without_path;
+    int opt_overwrite;
+{
+    int err = UNZ_OK;
+    if (unzLocateFile(uf,filename,CASESENSITIVITY)!=UNZ_OK)
+    {
+        printf("file %s not found in the zipfile\n",filename);
+        return 2;
+    }
+
+    if (do_extract_currentfile(uf,&opt_extract_without_path,
+                                      &opt_overwrite) == UNZ_OK)
+        return 0;
+    else
+        return 1;
+}
+
+
+int main(argc,argv)
+	int argc;
+	char *argv[];
+{
+	const char *zipfilename=NULL;
+    const char *filename_to_extract=NULL;
+	int i;
+	int opt_do_list=0;
+	int opt_do_extract=1;
+	int opt_do_extract_withoutpath=0;
+	int opt_overwrite=0;
+	char filename_try[512];
+	unzFile uf=NULL;
+
+	do_banner();
+	if (argc==1)
+	{
+		do_help();
+		exit(0);
+	}
+	else
+	{
+		for (i=1;i<argc;i++)
+		{
+			if ((*argv[i])=='-')
+			{
+				const char *p=argv[i]+1;
+				
+				while ((*p)!='\0')
+				{			
+					char c=*(p++);;
+					if ((c=='l') || (c=='L'))
+						opt_do_list = 1;
+					if ((c=='v') || (c=='V'))
+						opt_do_list = 1;
+					if ((c=='x') || (c=='X'))
+						opt_do_extract = 1;
+					if ((c=='e') || (c=='E'))
+						opt_do_extract = opt_do_extract_withoutpath = 1;
+					if ((c=='o') || (c=='O'))
+						opt_overwrite=1;
+				}
+			}
+			else
+            {
+				if (zipfilename == NULL)
+					zipfilename = argv[i];
+                else if (filename_to_extract==NULL)
+                        filename_to_extract = argv[i] ;
+            }
+		}
+	}
+
+	if (zipfilename!=NULL)
+	{
+		strcpy(filename_try,zipfilename);
+		uf = unzOpen(zipfilename);
+		if (uf==NULL)
+		{
+			strcat(filename_try,".zip");
+			uf = unzOpen(filename_try);
+		}
+	}
+
+	if (uf==NULL)
+	{
+		printf("Cannot open %s or %s.zip\n",zipfilename,zipfilename);
+		exit (1);
+	}
+    printf("%s opened\n",filename_try);
+
+	if (opt_do_list==1)
+		return do_list(uf);
+	else if (opt_do_extract==1)
+    {
+        if (filename_to_extract == NULL)
+		    return do_extract(uf,opt_do_extract_withoutpath,opt_overwrite);
+        else
+            return do_extract_onefile(uf,filename_to_extract,
+                                      opt_do_extract_withoutpath,opt_overwrite);
+    }
+	unzCloseCurrentFile(uf);
+
+	return 0;  /* to avoid warning */
+}

contrib/minizip/minizip.c

@@ -0,0 +1,302 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <errno.h>
+#include <fcntl.h>
+
+#ifdef unix
+# include <unistd.h>
+# include <utime.h>
+# include <sys/types.h>
+# include <sys/stat.h>
+#else
+# include <direct.h>
+# include <io.h>
+#endif
+
+#include "zip.h"
+
+
+#define WRITEBUFFERSIZE (16384)
+#define MAXFILENAME (256)
+
+#ifdef WIN32
+uLong filetime(f, tmzip, dt)
+    char *f;                /* name of file to get info on */
+    tm_zip *tmzip;             /* return value: access, modific. and creation times */
+    uLong *dt;             /* dostime */
+{
+  int ret = 0;
+  {
+      FILETIME ftLocal;
+      HANDLE hFind;
+      WIN32_FIND_DATA  ff32;
+
+      hFind = FindFirstFile(f,&ff32);
+      if (hFind != INVALID_HANDLE_VALUE)
+      {
+        FileTimeToLocalFileTime(&(ff32.ftLastWriteTime),&ftLocal);
+        FileTimeToDosDateTime(&ftLocal,((LPWORD)dt)+1,((LPWORD)dt)+0);
+        FindClose(hFind);
+        ret = 1;
+      }
+  }
+  return ret;
+}
+#else
+#ifdef unix
+uLong filetime(f, tmzip, dt)
+    char *f;                /* name of file to get info on */
+    tm_zip *tmzip;             /* return value: access, modific. and creation times */
+    uLong *dt;             /* dostime */
+{
+  int ret=0;
+  struct stat s;        /* results of stat() */
+  struct tm* filedate;
+  time_t tm_t=0;
+  
+  if (strcmp(f,"-")!=0)
+  {
+    char name[MAXFILENAME];
+    int len = strlen(f);
+    strcpy(name, f);
+    if (name[len - 1] == '/')
+      name[len - 1] = '\0';
+    /* not all systems allow stat'ing a file with / appended */
+    if (stat(name,&s)==0)
+    {
+      tm_t = s.st_mtime;
+      ret = 1;
+    }
+  }
+  filedate = localtime(&tm_t);
+
+  tmzip->tm_sec  = filedate->tm_sec;
+  tmzip->tm_min  = filedate->tm_min;
+  tmzip->tm_hour = filedate->tm_hour;
+  tmzip->tm_mday = filedate->tm_mday;
+  tmzip->tm_mon  = filedate->tm_mon ;
+  tmzip->tm_year = filedate->tm_year;
+
+  return ret;
+}
+#else
+uLong filetime(f, tmzip, dt)
+    char *f;                /* name of file to get info on */
+    tm_zip *tmzip;             /* return value: access, modific. and creation times */
+    uLong *dt;             /* dostime */
+{
+    return 0;
+}
+#endif
+#endif
+
+
+
+
+int check_exist_file(filename)
+    const char* filename;
+{
+	FILE* ftestexist;
+    int ret = 1;
+	ftestexist = fopen(filename,"rb");
+	if (ftestexist==NULL)
+        ret = 0;
+    else
+        fclose(ftestexist);
+    return ret;
+}
+
+void do_banner()
+{
+	printf("MiniZip 0.15, demo of zLib + Zip package written by Gilles Vollant\n");
+	printf("more info at http://wwww.winimage/zLibDll/unzip.htm\n\n");
+}
+
+void do_help()
+{	
+	printf("Usage : minizip [-o] file.zip [files_to_add]\n\n") ;
+}
+
+int main(argc,argv)
+	int argc;
+	char *argv[];
+{
+	int i;
+	int opt_overwrite=0;
+    int opt_compress_level=Z_DEFAULT_COMPRESSION;
+    int zipfilenamearg = 0;
+	char filename_try[MAXFILENAME];
+    int zipok;
+    int err=0;
+    int size_buf=0;
+    void* buf=NULL,
+
+
+	do_banner();
+	if (argc==1)
+	{
+		do_help();
+		exit(0);
+        return 0;
+	}
+	else
+	{
+		for (i=1;i<argc;i++)
+		{
+			if ((*argv[i])=='-')
+			{
+				const char *p=argv[i]+1;
+				
+				while ((*p)!='\0')
+				{			
+					char c=*(p++);;
+					if ((c=='o') || (c=='O'))
+						opt_overwrite = 1;
+                    if ((c>='0') && (c<='9'))
+                        opt_compress_level = c-'0';
+				}
+			}
+			else
+				if (zipfilenamearg == 0)
+                    zipfilenamearg = i ;
+		}
+	}
+
+    size_buf = WRITEBUFFERSIZE;
+    buf = (void*)malloc(size_buf);
+    if (buf==NULL)
+    {
+        printf("Error allocating memory\n");
+        return ZIP_INTERNALERROR;
+    }
+
+	if (zipfilenamearg==0)
+        zipok=0;
+    else
+	{
+        int i,len;
+        int dot_found=0;
+
+        zipok = 1 ;
+		strcpy(filename_try,argv[zipfilenamearg]);
+        len=strlen(filename_try);
+        for (i=0;i<len;i++)
+            if (filename_try[i]=='.')
+                dot_found=1;
+
+        if (dot_found==0)
+            strcat(filename_try,".zip");
+
+        if (opt_overwrite==0)
+            if (check_exist_file(filename_try)!=0)
+			{
+                char rep;
+				do
+				{
+					char answer[128];
+					printf("The file %s exist. Overwrite ? [y]es, [n]o : ",filename_try);
+					scanf("%1s",answer);
+					rep = answer[0] ;
+					if ((rep>='a') && (rep<='z'))
+						rep -= 0x20;
+				}
+				while ((rep!='Y') && (rep!='N'));
+                if (rep=='N')
+                    zipok = 0;
+			}
+    }
+
+    if (zipok==1)
+    {
+        zipFile zf;
+        int errclose;
+        zf = zipOpen(filename_try,0);
+        if (zf == NULL)
+        {
+            printf("error opening %s\n",filename_try);
+            err= ZIP_ERRNO;
+        }
+        else 
+            printf("creating %s\n",filename_try);
+
+        for (i=zipfilenamearg+1;(i<argc) && (err==ZIP_OK);i++)
+        {
+            if (((*(argv[i]))!='-') && ((*(argv[i]))!='/'))
+            {
+                FILE * fin;
+                int size_read;
+                const char* filenameinzip = argv[i];
+                zip_fileinfo zi;
+
+                zi.tmz_date.tm_sec = zi.tmz_date.tm_min = zi.tmz_date.tm_hour = 
+                zi.tmz_date.tm_mday = zi.tmz_date.tm_min = zi.tmz_date.tm_year = 0;
+                zi.dosDate = 0;
+                zi.internal_fa = 0;
+                zi.external_fa = 0;
+                filetime(filenameinzip,&zi.tmz_date,&zi.dosDate);
+
+
+                err = zipOpenNewFileInZip(zf,filenameinzip,&zi,
+                                 NULL,0,NULL,0,NULL /* comment*/,
+                                 (opt_compress_level != 0) ? Z_DEFLATED : 0,
+                                 opt_compress_level);
+
+                if (err != ZIP_OK)
+                    printf("error in opening %s in zipfile\n",filenameinzip);
+                else
+                {
+                    fin = fopen(filenameinzip,"rb");
+                    if (fin==NULL)
+                    {
+                        err=ZIP_ERRNO;
+                        printf("error in opening %s for reading\n",filenameinzip);
+                    }
+                }
+
+                if (err == ZIP_OK)
+                    do
+                    {
+                        err = ZIP_OK;
+                        size_read = fread(buf,1,size_buf,fin);
+                        if (size_read < size_buf)
+                            if (feof(fin)==0)
+                        {
+                            printf("error in reading %s\n",filenameinzip);
+                            err = ZIP_ERRNO;
+                        }
+
+                        if (size_read>0)
+                        {
+                            err = zipWriteInFileInZip (zf,buf,size_read);
+                            if (err<0)
+                            {
+                                printf("error in writing %s in the zipfile\n",
+                                                 filenameinzip);
+                            }
+                                
+                        }
+                    } while ((err == ZIP_OK) && (size_read>0));
+
+                fclose(fin);
+                if (err<0)
+                    err=ZIP_ERRNO;
+                else
+                {                    
+                    err = zipCloseFileInZip(zf);
+                    if (err!=ZIP_OK)
+                        printf("error in closing %s in the zipfile\n",
+                                    filenameinzip);
+                }
+            }
+        }
+        errclose = zipClose(zf,NULL);
+        if (errclose != ZIP_OK)
+            printf("error in closing %s\n",filename_try);
+   }
+
+    free(buf);
+    exit(0);
+	return 0;  /* to avoid warning */
+}

contrib/minizip/readme.txt

@@ -0,0 +1,37 @@
+
+UnZip 0.15 additionnal library
+
+
+  This unzip package allow extract file from .ZIP file, compatible with 
+PKZip 2.04g, WinZip, InfoZip tools and compatible.
+
+  Multi volume ZipFile (span) are not supported, and old compression used by old 
+PKZip 1.x are not supported.
+
+See probdesc.zip from PKWare for specification of .ZIP format.
+
+What is Unzip
+  The Zlib library support the deflate compression and the creation of gzip (.gz) 
+file. Zlib is free and small.
+  The .Zip format, which can contain several compressed files (.gz can containt
+only one file) is a very popular format. This is why I've written a package for reading file compressed in Zipfile.
+
+Using Unzip package
+
+You need source of Zlib (get zlib111.zip and read zlib.h).
+Get unzlb015.zip and read unzip.h (whith documentation of unzip functions)
+
+The Unzip package is only two file : unzip.h and unzip.c. But it use the Zlib 
+  files.
+unztst.c is a simple sample program, which list file in a zipfile and display
+  README.TXT or FILE_ID.DIZ (if these files are found).
+miniunz.c is a mini unzip program.
+
+I'm also currenlyt writing a zipping portion (zip.h, zip.c and test with minizip.c)
+
+Please email me for feedback.
+I hope my source is compatible with Unix system, but I need your help for be sure
+
+Latest revision : Mar 04th, 1998
+
+Check http://www.winimage.com/zLibDll/unzip.html for up to date info.

contrib/minizip/unzip.def

@@ -0,0 +1,15 @@
+	unzOpen                       @61
+	unzClose                      @62
+	unzGetGlobalInfo              @63
+	unzGetCurrentFileInfo         @64
+	unzGoToFirstFile              @65
+	unzGoToNextFile               @66
+	unzOpenCurrentFile            @67
+	unzReadCurrentFile            @68
+	unztell                       @70
+	unzeof                        @71
+	unzCloseCurrentFile           @72
+	unzGetGlobalComment           @73
+	unzStringFileNameCompare      @74
+	unzLocateFile                 @75
+	unzGetLocalExtrafield         @76

contrib/minizip/unzip.h

@@ -0,0 +1,275 @@
+/* unzip.h -- IO for uncompress .zip files using zlib 
+   Version 0.15 beta, Mar 19th, 1998,
+
+   Copyright (C) 1998 Gilles Vollant
+
+   This unzip package allow extract file from .ZIP file, compatible with PKZip 2.04g
+     WinZip, InfoZip tools and compatible.
+   Encryption and multi volume ZipFile (span) are not supported.
+   Old compressions used by old PKZip 1.x are not supported
+
+   THIS IS AN ALPHA VERSION. AT THIS STAGE OF DEVELOPPEMENT, SOMES API OR STRUCTURE
+   CAN CHANGE IN FUTURE VERSION !!
+   I WAIT FEEDBACK at mail info@winimage.com
+   Visit also http://www.winimage.com/zLibDll/unzip.htm for evolution
+
+   Condition of use and distribution are the same than zlib :
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+
+*/
+/* for more info about .ZIP format, see 
+      ftp://ftp.cdrom.com/pub/infozip/doc/appnote-970311-iz.zip
+   PkWare has also a specification at :
+      ftp://ftp.pkware.com/probdesc.zip */
+
+#ifndef _unz_H
+#define _unz_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef _ZLIB_H
+#include "zlib.h"
+#endif
+
+#if defined(STRICTUNZIP) || defined(STRICTZIPUNZIP)
+/* like the STRICT of WIN32, we define a pointer that cannot be converted
+    from (void*) without cast */
+typedef struct TagunzFile__ { int unused; } unzFile__; 
+typedef unzFile__ *unzFile;
+#else
+typedef voidp unzFile;
+#endif
+
+
+#define UNZ_OK                                  (0)
+#define UNZ_END_OF_LIST_OF_FILE (-100)
+#define UNZ_ERRNO               (Z_ERRNO)
+#define UNZ_EOF                 (0)
+#define UNZ_PARAMERROR                  (-102)
+#define UNZ_BADZIPFILE                  (-103)
+#define UNZ_INTERNALERROR               (-104)
+#define UNZ_CRCERROR                    (-105)
+
+/* tm_unz contain date/time info */
+typedef struct tm_unz_s 
+{
+	uInt tm_sec;            /* seconds after the minute - [0,59] */
+	uInt tm_min;            /* minutes after the hour - [0,59] */
+	uInt tm_hour;           /* hours since midnight - [0,23] */
+	uInt tm_mday;           /* day of the month - [1,31] */
+	uInt tm_mon;            /* months since January - [0,11] */
+	uInt tm_year;           /* years - [1980..2044] */
+} tm_unz;
+
+/* unz_global_info structure contain global data about the ZIPfile
+   These data comes from the end of central dir */
+typedef struct unz_global_info_s
+{
+	uLong number_entry;         /* total number of entries in
+				       the central dir on this disk */
+	uLong size_comment;         /* size of the global comment of the zipfile */
+} unz_global_info;
+
+
+/* unz_file_info contain information about a file in the zipfile */
+typedef struct unz_file_info_s
+{
+    uLong version;              /* version made by                 2 bytes */
+    uLong version_needed;       /* version needed to extract       2 bytes */
+    uLong flag;                 /* general purpose bit flag        2 bytes */
+    uLong compression_method;   /* compression method              2 bytes */
+    uLong dosDate;              /* last mod file date in Dos fmt   4 bytes */
+    uLong crc;                  /* crc-32                          4 bytes */
+    uLong compressed_size;      /* compressed size                 4 bytes */ 
+    uLong uncompressed_size;    /* uncompressed size               4 bytes */ 
+    uLong size_filename;        /* filename length                 2 bytes */
+    uLong size_file_extra;      /* extra field length              2 bytes */
+    uLong size_file_comment;    /* file comment length             2 bytes */
+
+    uLong disk_num_start;       /* disk number start               2 bytes */
+    uLong internal_fa;          /* internal file attributes        2 bytes */
+    uLong external_fa;          /* external file attributes        4 bytes */
+
+    tm_unz tmu_date;
+} unz_file_info;
+
+extern int ZEXPORT unzStringFileNameCompare OF ((const char* fileName1,
+												 const char* fileName2,
+												 int iCaseSensitivity));
+/*
+   Compare two filename (fileName1,fileName2).
+   If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp)
+   If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi
+								or strcasecmp)
+   If iCaseSenisivity = 0, case sensitivity is defaut of your operating system
+	(like 1 on Unix, 2 on Windows)
+*/
+
+
+extern unzFile ZEXPORT unzOpen OF((const char *path));
+/*
+  Open a Zip file. path contain the full pathname (by example,
+     on a Windows NT computer "c:\\zlib\\zlib111.zip" or on an Unix computer
+	 "zlib/zlib111.zip".
+	 If the zipfile cannot be opened (file don't exist or in not valid), the
+	   return value is NULL.
+     Else, the return value is a unzFile Handle, usable with other function
+	   of this unzip package.
+*/
+
+extern int ZEXPORT unzClose OF((unzFile file));
+/*
+  Close a ZipFile opened with unzipOpen.
+  If there is files inside the .Zip opened with unzOpenCurrentFile (see later),
+    these files MUST be closed with unzipCloseCurrentFile before call unzipClose.
+  return UNZ_OK if there is no problem. */
+
+extern int ZEXPORT unzGetGlobalInfo OF((unzFile file,
+					unz_global_info *pglobal_info));
+/*
+  Write info about the ZipFile in the *pglobal_info structure.
+  No preparation of the structure is needed
+  return UNZ_OK if there is no problem. */
+
+
+extern int ZEXPORT unzGetGlobalComment OF((unzFile file,
+										   char *szComment,
+					   uLong uSizeBuf));
+/*
+  Get the global comment string of the ZipFile, in the szComment buffer.
+  uSizeBuf is the size of the szComment buffer.
+  return the number of byte copied or an error code <0
+*/
+
+
+/***************************************************************************/
+/* Unzip package allow you browse the directory of the zipfile */
+
+extern int ZEXPORT unzGoToFirstFile OF((unzFile file));
+/*
+  Set the current file of the zipfile to the first file.
+  return UNZ_OK if there is no problem
+*/
+
+extern int ZEXPORT unzGoToNextFile OF((unzFile file));
+/*
+  Set the current file of the zipfile to the next file.
+  return UNZ_OK if there is no problem
+  return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest.
+*/
+
+extern int ZEXPORT unzLocateFile OF((unzFile file, 
+				     const char *szFileName,
+				     int iCaseSensitivity));
+/*
+  Try locate the file szFileName in the zipfile.
+  For the iCaseSensitivity signification, see unzStringFileNameCompare
+
+  return value :
+  UNZ_OK if the file is found. It becomes the current file.
+  UNZ_END_OF_LIST_OF_FILE if the file is not found
+*/
+
+
+extern int ZEXPORT unzGetCurrentFileInfo OF((unzFile file,
+					     unz_file_info *pfile_info,
+					     char *szFileName,
+					     uLong fileNameBufferSize,
+					     void *extraField,
+					     uLong extraFieldBufferSize,
+					     char *szComment,
+					     uLong commentBufferSize));
+/*
+  Get Info about the current file
+  if pfile_info!=NULL, the *pfile_info structure will contain somes info about
+	    the current file
+  if szFileName!=NULL, the filemane string will be copied in szFileName
+			(fileNameBufferSize is the size of the buffer)
+  if extraField!=NULL, the extra field information will be copied in extraField
+			(extraFieldBufferSize is the size of the buffer).
+			This is the Central-header version of the extra field
+  if szComment!=NULL, the comment string of the file will be copied in szComment
+			(commentBufferSize is the size of the buffer)
+*/
+
+/***************************************************************************/
+/* for reading the content of the current zipfile, you can open it, read data
+   from it, and close it (you can close it before reading all the file)
+   */
+
+extern int ZEXPORT unzOpenCurrentFile OF((unzFile file));
+/*
+  Open for reading data the current file in the zipfile.
+  If there is no error, the return value is UNZ_OK.
+*/
+
+extern int ZEXPORT unzCloseCurrentFile OF((unzFile file));
+/*
+  Close the file in zip opened with unzOpenCurrentFile
+  Return UNZ_CRCERROR if all the file was read but the CRC is not good
+*/
+
+												
+extern int ZEXPORT unzReadCurrentFile OF((unzFile file, 
+					  voidp buf,
+					  unsigned len));
+/*
+  Read bytes from the current file (opened by unzOpenCurrentFile)
+  buf contain buffer where data must be copied
+  len the size of buf.
+
+  return the number of byte copied if somes bytes are copied
+  return 0 if the end of file was reached
+  return <0 with error code if there is an error
+    (UNZ_ERRNO for IO error, or zLib error for uncompress error)
+*/
+
+extern z_off_t ZEXPORT unztell OF((unzFile file));
+/*
+  Give the current position in uncompressed data
+*/
+
+extern int ZEXPORT unzeof OF((unzFile file));
+/*
+  return 1 if the end of file was reached, 0 elsewhere 
+*/
+
+extern int ZEXPORT unzGetLocalExtrafield OF((unzFile file,
+											 voidp buf,
+											 unsigned len));
+/*
+  Read extra field from the current file (opened by unzOpenCurrentFile)
+  This is the local-header version of the extra field (sometimes, there is
+    more info in the local-header version than in the central-header)
+
+  if buf==NULL, it return the size of the local extra field
+
+  if buf!=NULL, len is the size of the buffer, the extra header is copied in
+	buf.
+  the return value is the number of bytes copied in buf, or (if <0) 
+	the error code
+*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _unz_H */

contrib/minizip/zip.c

@@ -0,0 +1,718 @@
+/* zip.c -- IO on .zip files using zlib 
+   Version 0.15 beta, Mar 19th, 1998,
+
+   Read zip.h for more info
+*/
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "zlib.h"
+#include "zip.h"
+
+#ifdef STDC
+#  include <stddef.h>
+#  include <string.h>
+#  include <stdlib.h>
+#endif
+#ifdef NO_ERRNO_H
+    extern int errno;
+#else
+#   include <errno.h>
+#endif
+
+
+#ifndef local
+#  define local static
+#endif
+/* compile with -Dlocal if your debugger can't find static symbols */
+
+#ifndef VERSIONMADEBY
+# define VERSIONMADEBY   (0x0) /* platform depedent */
+#endif
+
+#ifndef Z_BUFSIZE
+#define Z_BUFSIZE (16384)
+#endif
+
+#ifndef Z_MAXFILENAMEINZIP
+#define Z_MAXFILENAMEINZIP (256)
+#endif
+
+#ifndef ALLOC
+# define ALLOC(size) (malloc(size))
+#endif
+#ifndef TRYFREE
+# define TRYFREE(p) {if (p) free(p);}
+#endif
+
+/*
+#define SIZECENTRALDIRITEM (0x2e)
+#define SIZEZIPLOCALHEADER (0x1e)
+*/
+
+/* I've found an old Unix (a SunOS 4.1.3_U1) without all SEEK_* defined.... */
+
+#ifndef SEEK_CUR
+#define SEEK_CUR    1
+#endif
+
+#ifndef SEEK_END
+#define SEEK_END    2
+#endif
+
+#ifndef SEEK_SET
+#define SEEK_SET    0
+#endif
+
+const char zip_copyright[] =
+   " zip 0.15 Copyright 1998 Gilles Vollant ";
+
+
+#define SIZEDATA_INDATABLOCK (4096-(4*4))
+
+#define LOCALHEADERMAGIC    (0x04034b50)
+#define CENTRALHEADERMAGIC  (0x02014b50)
+#define ENDHEADERMAGIC      (0x06054b50)
+
+#define FLAG_LOCALHEADER_OFFSET (0x06)
+#define CRC_LOCALHEADER_OFFSET  (0x0e)
+
+#define SIZECENTRALHEADER (0x2e) /* 46 */
+
+typedef struct linkedlist_datablock_internal_s
+{
+  struct linkedlist_datablock_internal_s* next_datablock;
+  uLong  avail_in_this_block;
+  uLong  filled_in_this_block;
+  uLong  unused; /* for future use and alignement */
+  unsigned char data[SIZEDATA_INDATABLOCK];
+} linkedlist_datablock_internal;
+
+typedef struct linkedlist_data_s
+{
+    linkedlist_datablock_internal* first_block;
+    linkedlist_datablock_internal* last_block;
+} linkedlist_data;
+
+
+typedef struct
+{
+	z_stream stream;            /* zLib stream structure for inflate */
+    int  stream_initialised;    /* 1 is stream is initialised */
+    uInt pos_in_buffered_data;  /* last written byte in buffered_data */
+
+    uLong pos_local_header;     /* offset of the local header of the file 
+                                     currenty writing */
+    char* central_header;       /* central header data for the current file */
+    uLong size_centralheader;   /* size of the central header for cur file */
+    uLong flag;                 /* flag of the file currently writing */
+
+    int  method;                /* compression method of file currenty wr.*/
+    Byte buffered_data[Z_BUFSIZE];/* buffer contain compressed data to be writ*/
+    uLong dosDate;
+    uLong crc32;
+} curfile_info;
+
+typedef struct
+{
+    FILE * filezip;
+    linkedlist_data central_dir;/* datablock with central dir in construction*/
+    int  in_opened_file_inzip;  /* 1 if a file in the zip is currently writ.*/
+    curfile_info ci;            /* info on the file curretly writing */
+
+    uLong begin_pos;            /* position of the beginning of the zipfile */
+    uLong number_entry;
+} zip_internal;
+
+local linkedlist_datablock_internal* allocate_new_datablock()
+{
+    linkedlist_datablock_internal* ldi;
+    ldi = (linkedlist_datablock_internal*)
+                 ALLOC(sizeof(linkedlist_datablock_internal));
+    if (ldi!=NULL)
+    {
+        ldi->next_datablock = NULL ;
+        ldi->filled_in_this_block = 0 ;
+        ldi->avail_in_this_block = SIZEDATA_INDATABLOCK ;
+    }
+    return ldi;
+}
+
+local void free_datablock(ldi)
+    linkedlist_datablock_internal* ldi;
+{
+    while (ldi!=NULL)
+    {
+        linkedlist_datablock_internal* ldinext = ldi->next_datablock;
+        TRYFREE(ldi);
+        ldi = ldinext;
+    }
+}
+
+local void init_linkedlist(ll)
+    linkedlist_data* ll;
+{
+    ll->first_block = ll->last_block = NULL;
+}
+
+local void free_linkedlist(ll)
+    linkedlist_data* ll;
+{
+    free_datablock(ll->first_block);
+    ll->first_block = ll->last_block = NULL;
+}
+
+
+local int add_data_in_datablock(ll,buf,len)
+    linkedlist_data* ll;    
+    const void* buf;
+    uLong len;
+{
+    linkedlist_datablock_internal* ldi;
+    const unsigned char* from_copy;
+
+    if (ll==NULL)
+        return ZIP_INTERNALERROR;
+
+    if (ll->last_block == NULL)
+    {
+        ll->first_block = ll->last_block = allocate_new_datablock();
+        if (ll->first_block == NULL)
+            return ZIP_INTERNALERROR;
+    }
+
+    ldi = ll->last_block;
+    from_copy = (unsigned char*)buf;
+
+    while (len>0)
+    {
+        uInt copy_this;
+        uInt i;
+        unsigned char* to_copy;
+
+        if (ldi->avail_in_this_block==0)
+        {
+            ldi->next_datablock = allocate_new_datablock();
+            if (ldi->next_datablock == NULL)
+                return ZIP_INTERNALERROR;
+            ldi = ldi->next_datablock ;
+            ll->last_block = ldi;
+        }
+
+        if (ldi->avail_in_this_block < len)
+            copy_this = (uInt)ldi->avail_in_this_block;
+        else
+            copy_this = (uInt)len;
+
+        to_copy = &(ldi->data[ldi->filled_in_this_block]);
+
+        for (i=0;i<copy_this;i++)
+            *(to_copy+i)=*(from_copy+i);
+
+        ldi->filled_in_this_block += copy_this;
+        ldi->avail_in_this_block -= copy_this;
+        from_copy += copy_this ;
+        len -= copy_this;
+    }
+    return ZIP_OK;
+}
+
+
+local int write_datablock(fout,ll)
+    FILE * fout;
+    linkedlist_data* ll;    
+{
+    linkedlist_datablock_internal* ldi;
+    ldi = ll->first_block;
+    while (ldi!=NULL)
+    {
+        if (ldi->filled_in_this_block > 0)
+            if (fwrite(ldi->data,(uInt)ldi->filled_in_this_block,1,fout)!=1)
+                return ZIP_ERRNO;
+        ldi = ldi->next_datablock;
+    }
+    return ZIP_OK;
+}
+
+/****************************************************************************/
+
+/* ===========================================================================
+   Outputs a long in LSB order to the given file
+   nbByte == 1, 2 or 4 (byte, short or long)
+*/
+
+local int ziplocal_putValue OF((FILE *file, uLong x, int nbByte));
+local int ziplocal_putValue (file, x, nbByte)
+    FILE *file;
+    uLong x;
+    int nbByte;
+{
+    unsigned char buf[4];
+    int n;
+    for (n = 0; n < nbByte; n++) {
+        buf[n] = (unsigned char)(x & 0xff);
+        x >>= 8;
+    }
+    if (fwrite(buf,nbByte,1,file)!=1)
+        return ZIP_ERRNO;
+    else
+        return ZIP_OK;
+}
+
+local void ziplocal_putValue_inmemory OF((void* dest, uLong x, int nbByte));
+local void ziplocal_putValue_inmemory (dest, x, nbByte)
+    void* dest;
+    uLong x;
+    int nbByte;
+{
+    unsigned char* buf=(unsigned char*)dest;
+    int n;
+    for (n = 0; n < nbByte; n++) {
+        buf[n] = (unsigned char)(x & 0xff);
+        x >>= 8;
+    }
+}
+/****************************************************************************/
+
+
+local uLong ziplocal_TmzDateToDosDate(ptm,dosDate)
+    tm_zip* ptm;
+    uLong dosDate;
+{
+    uLong year = (uLong)ptm->tm_year;
+    if (year>1980)
+        year-=1980;
+    else if (year>80)
+        year-=80;
+    return
+      (uLong) (((ptm->tm_mday) + (32 * (ptm->tm_mon+1)) + (512 * year)) << 16) |
+        ((ptm->tm_sec/2) + (32* ptm->tm_min) + (2048 * (uLong)ptm->tm_hour));
+}
+
+
+/****************************************************************************/
+
+extern zipFile ZEXPORT zipOpen (pathname, append)
+    const char *pathname;
+    int append;
+{
+    zip_internal ziinit;
+    zip_internal* zi;
+
+    ziinit.filezip = fopen(pathname,(append == 0) ? "wb" : "ab");
+    if (ziinit.filezip == NULL)
+        return NULL;
+    ziinit.begin_pos = ftell(ziinit.filezip);
+    ziinit.in_opened_file_inzip = 0;
+    ziinit.ci.stream_initialised = 0;
+    ziinit.number_entry = 0;
+    init_linkedlist(&(ziinit.central_dir));
+
+
+    zi = (zip_internal*)ALLOC(sizeof(zip_internal));
+    if (zi==NULL)
+    {
+        fclose(ziinit.filezip);
+        return NULL;
+    }
+
+    *zi = ziinit;
+    return (zipFile)zi;
+}
+
+extern int ZEXPORT zipOpenNewFileInZip (file, filename, zipfi, 
+                                        extrafield_local, size_extrafield_local,
+                                        extrafield_global, size_extrafield_global,
+                                        comment, method, level)
+    zipFile file;
+    const char* filename;
+    const zip_fileinfo* zipfi;
+    const void* extrafield_local;
+    uInt size_extrafield_local;
+    const void* extrafield_global;
+    uInt size_extrafield_global;
+    const char* comment;
+    int method;
+    int level;
+{
+    zip_internal* zi;
+    uInt size_filename;
+    uInt size_comment;
+    uInt i;
+    int err = ZIP_OK;
+
+    if (file == NULL)
+        return ZIP_PARAMERROR;
+    if ((method!=0) && (method!=Z_DEFLATED))
+        return ZIP_PARAMERROR;
+
+    zi = (zip_internal*)file;
+
+    if (zi->in_opened_file_inzip == 1)
+    {
+        err = zipCloseFileInZip (file);
+        if (err != ZIP_OK)
+            return err;
+    }
+
+
+    if (filename==NULL)
+        filename="-";
+
+    if (comment==NULL)
+        size_comment = 0;
+    else
+        size_comment = strlen(comment);
+
+    size_filename = strlen(filename);
+
+    if (zipfi == NULL)
+        zi->ci.dosDate = 0;
+    else
+    {
+        if (zipfi->dosDate != 0)
+            zi->ci.dosDate = zipfi->dosDate;
+        else zi->ci.dosDate = ziplocal_TmzDateToDosDate(&zipfi->tmz_date,zipfi->dosDate);
+    }
+
+    zi->ci.flag = 0;
+    if ((level==8) || (level==9))
+      zi->ci.flag |= 2;
+    if ((level==2))
+      zi->ci.flag |= 4;
+    if ((level==1))
+      zi->ci.flag |= 6;
+
+    zi->ci.crc32 = 0;
+    zi->ci.method = method;
+    zi->ci.stream_initialised = 0;
+    zi->ci.pos_in_buffered_data = 0;
+    zi->ci.pos_local_header = ftell(zi->filezip);
+    zi->ci.size_centralheader = SIZECENTRALHEADER + size_filename + 
+                                      size_extrafield_global + size_comment;
+    zi->ci.central_header = (char*)ALLOC((uInt)zi->ci.size_centralheader);
+
+    ziplocal_putValue_inmemory(zi->ci.central_header,(uLong)CENTRALHEADERMAGIC,4);
+    /* version info */
+    ziplocal_putValue_inmemory(zi->ci.central_header+4,(uLong)VERSIONMADEBY,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+6,(uLong)20,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+8,(uLong)zi->ci.flag,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+10,(uLong)zi->ci.method,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+12,(uLong)zi->ci.dosDate,4);
+    ziplocal_putValue_inmemory(zi->ci.central_header+16,(uLong)0,4); /*crc*/
+    ziplocal_putValue_inmemory(zi->ci.central_header+20,(uLong)0,4); /*compr size*/
+    ziplocal_putValue_inmemory(zi->ci.central_header+24,(uLong)0,4); /*uncompr size*/
+    ziplocal_putValue_inmemory(zi->ci.central_header+28,(uLong)size_filename,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+30,(uLong)size_extrafield_global,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+32,(uLong)size_comment,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+34,(uLong)0,2); /*disk nm start*/
+
+    if (zipfi==NULL)
+        ziplocal_putValue_inmemory(zi->ci.central_header+36,(uLong)0,2); 
+    else
+        ziplocal_putValue_inmemory(zi->ci.central_header+36,(uLong)zipfi->internal_fa,2); 
+
+    if (zipfi==NULL)
+        ziplocal_putValue_inmemory(zi->ci.central_header+38,(uLong)0,4); 
+    else
+        ziplocal_putValue_inmemory(zi->ci.central_header+38,(uLong)zipfi->external_fa,4);
+
+    ziplocal_putValue_inmemory(zi->ci.central_header+42,(uLong)zi->ci.pos_local_header,4);
+
+    for (i=0;i<size_filename;i++)
+        *(zi->ci.central_header+SIZECENTRALHEADER+i) = *(filename+i);
+
+    for (i=0;i<size_extrafield_global;i++)
+        *(zi->ci.central_header+SIZECENTRALHEADER+size_filename+i) =
+              *(((const char*)extrafield_global)+i);
+
+    for (i=0;i<size_comment;i++)
+        *(zi->ci.central_header+SIZECENTRALHEADER+size_filename+
+              size_extrafield_global+i) = *(filename+i);
+    if (zi->ci.central_header == NULL)
+        return ZIP_INTERNALERROR;
+
+    /* write the local header */
+    err = ziplocal_putValue(zi->filezip,(uLong)LOCALHEADERMAGIC,4);
+
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)20,2);/* version needed to extract */
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.flag,2);
+
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.method,2);
+
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.dosDate,4);
+
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)0,4); /* crc 32, unknown */
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)0,4); /* compressed size, unknown */
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)0,4); /* uncompressed size, unknown */
+
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)size_filename,2);
+
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)size_extrafield_local,2);
+
+    if ((err==ZIP_OK) && (size_filename>0))
+        if (fwrite(filename,(uInt)size_filename,1,zi->filezip)!=1)
+                err = ZIP_ERRNO;
+
+    if ((err==ZIP_OK) && (size_extrafield_local>0))
+        if (fwrite(extrafield_local,(uInt)size_extrafield_local,1,zi->filezip)
+                                                                           !=1)
+                err = ZIP_ERRNO;
+
+    zi->ci.stream.avail_in = (uInt)0;
+    zi->ci.stream.avail_out = (uInt)Z_BUFSIZE;
+    zi->ci.stream.next_out = zi->ci.buffered_data;
+    zi->ci.stream.total_in = 0;
+    zi->ci.stream.total_out = 0;
+
+    if ((err==ZIP_OK) && (zi->ci.method == Z_DEFLATED))
+    {
+        zi->ci.stream.zalloc = (alloc_func)0;
+        zi->ci.stream.zfree = (free_func)0;
+        zi->ci.stream.opaque = (voidpf)0;
+
+        err = deflateInit2(&zi->ci.stream, level,
+               Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, 0);
+
+        if (err==Z_OK)
+            zi->ci.stream_initialised = 1;
+    }
+
+
+    if (err==Z_OK)
+        zi->in_opened_file_inzip = 1;
+    return err;
+}
+
+extern int ZEXPORT zipWriteInFileInZip (file, buf, len)
+    zipFile file;
+    const voidp buf;
+    unsigned len;
+{
+    zip_internal* zi;
+    int err=ZIP_OK;
+
+    if (file == NULL)
+        return ZIP_PARAMERROR;
+    zi = (zip_internal*)file;
+
+    if (zi->in_opened_file_inzip == 0)
+        return ZIP_PARAMERROR;
+
+    zi->ci.stream.next_in = buf;
+    zi->ci.stream.avail_in = len;
+    zi->ci.crc32 = crc32(zi->ci.crc32,buf,len);
+
+    while ((err==ZIP_OK) && (zi->ci.stream.avail_in>0))
+    {
+        if (zi->ci.stream.avail_out == 0)
+        {
+            if (fwrite(zi->ci.buffered_data,(uInt)zi->ci.pos_in_buffered_data,1,zi->filezip)
+                                                                           !=1)
+                err = ZIP_ERRNO;
+            zi->ci.pos_in_buffered_data = 0;
+            zi->ci.stream.avail_out = (uInt)Z_BUFSIZE;
+            zi->ci.stream.next_out = zi->ci.buffered_data;
+        }
+
+        if (zi->ci.method == Z_DEFLATED)
+        {
+            uLong uTotalOutBefore = zi->ci.stream.total_out;
+            err=deflate(&zi->ci.stream,  Z_NO_FLUSH);
+            zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ;
+
+        }
+        else
+        {
+            uInt copy_this,i;
+            if (zi->ci.stream.avail_in < zi->ci.stream.avail_out)
+                copy_this = zi->ci.stream.avail_in;
+            else
+                copy_this = zi->ci.stream.avail_out;
+            for (i=0;i<copy_this;i++)
+                *(((char*)zi->ci.stream.next_out)+i) =
+                    *(((const char*)zi->ci.stream.next_in)+i);
+            {
+                zi->ci.stream.avail_in -= copy_this;
+                zi->ci.stream.avail_out-= copy_this;
+                zi->ci.stream.next_in+= copy_this;
+                zi->ci.stream.next_out+= copy_this;
+                zi->ci.stream.total_in+= copy_this;
+                zi->ci.stream.total_out+= copy_this;
+                zi->ci.pos_in_buffered_data += copy_this;
+            }
+        }
+    }
+
+    return 0;
+}
+
+extern int ZEXPORT zipCloseFileInZip (file)
+    zipFile file;
+{
+    zip_internal* zi;
+    int err=ZIP_OK;
+
+    if (file == NULL)
+        return ZIP_PARAMERROR;
+    zi = (zip_internal*)file;
+
+    if (zi->in_opened_file_inzip == 0)    
+        return ZIP_PARAMERROR;
+    zi->ci.stream.avail_in = 0;
+    
+    if (zi->ci.method == Z_DEFLATED)
+        while (err==ZIP_OK)
+    {
+        uLong uTotalOutBefore;
+        if (zi->ci.stream.avail_out == 0)
+        {
+            if (fwrite(zi->ci.buffered_data,(uInt)zi->ci.pos_in_buffered_data,1,zi->filezip)
+                                                                           !=1)
+                err = ZIP_ERRNO;
+            zi->ci.pos_in_buffered_data = 0;
+            zi->ci.stream.avail_out = (uInt)Z_BUFSIZE;
+            zi->ci.stream.next_out = zi->ci.buffered_data;
+        }
+        uTotalOutBefore = zi->ci.stream.total_out;
+        err=deflate(&zi->ci.stream,  Z_FINISH);
+        zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ;
+    }
+
+    if (err==Z_STREAM_END)
+        err=ZIP_OK; /* this is normal */
+
+    if ((zi->ci.pos_in_buffered_data>0) && (err==ZIP_OK))
+        if (fwrite(zi->ci.buffered_data,(uInt)zi->ci.pos_in_buffered_data,1,zi->filezip)
+                                                                       !=1)
+            err = ZIP_ERRNO;
+
+    if ((zi->ci.method == Z_DEFLATED) && (err==ZIP_OK))
+    {
+        err=deflateEnd(&zi->ci.stream);
+        zi->ci.stream_initialised = 0;
+    }
+
+    ziplocal_putValue_inmemory(zi->ci.central_header+16,(uLong)zi->ci.crc32,4); /*crc*/
+    ziplocal_putValue_inmemory(zi->ci.central_header+20,
+                                (uLong)zi->ci.stream.total_out,4); /*compr size*/
+    ziplocal_putValue_inmemory(zi->ci.central_header+24,
+                                (uLong)zi->ci.stream.total_in,4); /*uncompr size*/
+
+    if (err==ZIP_OK)
+        err = add_data_in_datablock(&zi->central_dir,zi->ci.central_header,
+                                       (uLong)zi->ci.size_centralheader);
+    free(zi->ci.central_header);
+
+    if (err==ZIP_OK)
+    {
+        long cur_pos_inzip = ftell(zi->filezip);
+	    if (fseek(zi->filezip,
+                  zi->ci.pos_local_header + 14,SEEK_SET)!=0)
+		    err = ZIP_ERRNO;
+
+        if (err==ZIP_OK)
+            err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.crc32,4); /* crc 32, unknown */
+
+        if (err==ZIP_OK) /* compressed size, unknown */
+            err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.stream.total_out,4); 
+
+        if (err==ZIP_OK) /* uncompressed size, unknown */
+            err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.stream.total_in,4);
+
+	    if (fseek(zi->filezip,
+                  cur_pos_inzip,SEEK_SET)!=0)
+		    err = ZIP_ERRNO;
+    }
+
+    zi->number_entry ++;
+    zi->in_opened_file_inzip = 0;
+
+    return err;
+}
+
+extern int ZEXPORT zipClose (file, global_comment)
+    zipFile file;
+    const char* global_comment;
+{
+    zip_internal* zi;
+    int err = 0;
+    uLong size_centraldir = 0;
+    uLong centraldir_pos_inzip ;
+    uInt size_global_comment;
+    if (file == NULL)
+        return ZIP_PARAMERROR;
+    zi = (zip_internal*)file;
+
+    if (zi->in_opened_file_inzip == 1)
+    {
+        err = zipCloseFileInZip (file);
+    }
+
+    if (global_comment==NULL)
+        size_global_comment = 0;
+    else
+        size_global_comment = strlen(global_comment);
+
+
+    centraldir_pos_inzip = ftell(zi->filezip);
+    if (err==ZIP_OK)
+    {
+        linkedlist_datablock_internal* ldi = zi->central_dir.first_block ;
+        while (ldi!=NULL)
+        {
+            if ((err==ZIP_OK) && (ldi->filled_in_this_block>0))
+                if (fwrite(ldi->data,(uInt)ldi->filled_in_this_block,
+                                        1,zi->filezip) !=1 )
+                    err = ZIP_ERRNO;
+
+            size_centraldir += ldi->filled_in_this_block;
+            ldi = ldi->next_datablock;
+        }
+    }
+    free_datablock(zi->central_dir.first_block);
+
+    if (err==ZIP_OK) /* Magic End */
+        err = ziplocal_putValue(zi->filezip,(uLong)ENDHEADERMAGIC,4);
+
+    if (err==ZIP_OK) /* number of this disk */
+        err = ziplocal_putValue(zi->filezip,(uLong)0,2);
+
+    if (err==ZIP_OK) /* number of the disk with the start of the central directory */
+        err = ziplocal_putValue(zi->filezip,(uLong)0,2);
+
+    if (err==ZIP_OK) /* total number of entries in the central dir on this disk */
+        err = ziplocal_putValue(zi->filezip,(uLong)zi->number_entry,2);
+
+    if (err==ZIP_OK) /* total number of entries in the central dir */
+        err = ziplocal_putValue(zi->filezip,(uLong)zi->number_entry,2);
+
+    if (err==ZIP_OK) /* size of the central directory */
+        err = ziplocal_putValue(zi->filezip,(uLong)size_centraldir,4);
+
+    if (err==ZIP_OK) /* offset of start of central directory with respect to the 
+	                        starting disk number */
+        err = ziplocal_putValue(zi->filezip,(uLong)centraldir_pos_inzip ,4);
+
+    if (err==ZIP_OK) /* zipfile comment length */
+        err = ziplocal_putValue(zi->filezip,(uLong)size_global_comment,2);
+
+    if ((err==ZIP_OK) && (size_global_comment>0))
+        if (fwrite(global_comment,(uInt)size_global_comment,1,zi->filezip) !=1 )
+                err = ZIP_ERRNO;
+    fclose(zi->filezip);
+    TRYFREE(zi);
+
+    return err;
+}

contrib/minizip/zip.def

@@ -0,0 +1,5 @@
+	zipOpen                       @80
+	zipOpenNewFileInZip           @81
+	zipWriteInFileInZip           @82
+	zipCloseFileInZip             @83
+	zipClose                      @84

contrib/minizip/zip.h

@@ -0,0 +1,150 @@
+/* zip.h -- IO for compress .zip files using zlib 
+   Version 0.15 alpha, Mar 19th, 1998,
+
+   Copyright (C) 1998 Gilles Vollant
+
+   This unzip package allow creates .ZIP file, compatible with PKZip 2.04g
+     WinZip, InfoZip tools and compatible.
+   Encryption and multi volume ZipFile (span) are not supported.
+   Old compressions used by old PKZip 1.x are not supported
+
+  For uncompress .zip file, look at unzip.h
+
+   THIS IS AN ALPHA VERSION. AT THIS STAGE OF DEVELOPPEMENT, SOMES API OR STRUCTURE
+   CAN CHANGE IN FUTURE VERSION !!
+   I WAIT FEEDBACK at mail info@winimage.com
+   Visit also http://www.winimage.com/zLibDll/zip.htm for evolution
+
+   Condition of use and distribution are the same than zlib :
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+
+*/
+
+/* for more info about .ZIP format, see 
+      ftp://ftp.cdrom.com/pub/infozip/doc/appnote-970311-iz.zip
+   PkWare has also a specification at :
+      ftp://ftp.pkware.com/probdesc.zip
+*/
+
+#ifndef _zip_H
+#define _zip_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef _ZLIB_H
+#include "zlib.h"
+#endif
+
+#if defined(STRICTZIP) || defined(STRICTZIPUNZIP)
+/* like the STRICT of WIN32, we define a pointer that cannot be converted
+    from (void*) without cast */
+typedef struct TagzipFile__ { int unused; } zipFile__; 
+typedef zipFile__ *zipFile;
+#else
+typedef voidp zipFile;
+#endif
+
+#define ZIP_OK                                  (0)
+#define ZIP_ERRNO               (Z_ERRNO)
+#define ZIP_PARAMERROR                  (-102)
+#define ZIP_INTERNALERROR               (-104)
+
+/* tm_zip contain date/time info */
+typedef struct tm_zip_s 
+{
+	uInt tm_sec;            /* seconds after the minute - [0,59] */
+	uInt tm_min;            /* minutes after the hour - [0,59] */
+	uInt tm_hour;           /* hours since midnight - [0,23] */
+	uInt tm_mday;           /* day of the month - [1,31] */
+	uInt tm_mon;            /* months since January - [0,11] */
+	uInt tm_year;           /* years - [1980..2044] */
+} tm_zip;
+
+typedef struct
+{
+	tm_zip      tmz_date;       /* date in understandable format           */
+    uLong       dosDate;       /* if dos_date == 0, tmu_date is used      */
+/*    uLong       flag;        */   /* general purpose bit flag        2 bytes */
+
+    uLong       internal_fa;    /* internal file attributes        2 bytes */
+    uLong       external_fa;    /* external file attributes        4 bytes */
+} zip_fileinfo;
+
+extern zipFile ZEXPORT zipOpen OF((const char *pathname, int append));
+/*
+  Create a zipfile.
+	 pathname contain on Windows NT a filename like "c:\\zlib\\zlib111.zip" or on
+	   an Unix computer "zlib/zlib111.zip".
+	 if the file pathname exist and append=1, the zip will be created at the end
+	   of the file. (useful if the file contain a self extractor code)
+	 If the zipfile cannot be opened, the return value is NULL.
+     Else, the return value is a zipFile Handle, usable with other function
+	   of this zip package.
+
+
+*/
+
+extern int ZEXPORT zipOpenNewFileInZip OF((zipFile file,
+					   const char* filename,
+					   const zip_fileinfo* zipfi,
+					   const void* extrafield_local,
+					   uInt size_extrafield_local,
+					   const void* extrafield_global,
+					   uInt size_extrafield_global,
+					   const char* comment,
+					   int method,
+					   int level));
+/*
+  Open a file in the ZIP for writing.
+  filename : the filename in zip (if NULL, '-' without quote will be used
+  *zipfi contain supplemental information
+  if extrafield_local!=NULL and size_extrafield_local>0, extrafield_local
+    contains the extrafield data the the local header
+  if extrafield_global!=NULL and size_extrafield_global>0, extrafield_global
+    contains the extrafield data the the local header
+  if comment != NULL, comment contain the comment string
+  method contain the compression method (0 for store, Z_DEFLATED for deflate)
+  level contain the level of compression (can be Z_DEFAULT_COMPRESSION)
+*/
+
+extern int ZEXPORT zipWriteInFileInZip OF((zipFile file,
+					   const voidp buf,
+					   unsigned len));
+/*
+  Write data in the zipfile
+*/
+
+extern int ZEXPORT zipCloseFileInZip OF((zipFile file));
+/*
+  Close the current file in the zipfile
+*/
+
+extern int ZEXPORT zipClose OF((zipFile file,
+				const char* global_comment));
+/*
+  Close the zipfile
+*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _zip_H */

contrib/minizip/zlibvc.def

@@ -0,0 +1,74 @@
+LIBRARY		"zlib"
+
+DESCRIPTION	'"""zlib data compression library"""'
+
+
+VERSION		1.11
+
+
+HEAPSIZE	1048576,8192
+
+EXPORTS
+    adler32                        @1
+    compress                       @2
+    crc32                          @3
+    deflate                        @4
+    deflateCopy                    @5
+    deflateEnd                     @6
+    deflateInit2_                  @7
+    deflateInit_                   @8
+    deflateParams                  @9
+    deflateReset                   @10
+    deflateSetDictionary           @11
+    gzclose                        @12
+    gzdopen                        @13
+    gzerror                        @14
+    gzflush                        @15
+    gzopen                         @16
+    gzread                         @17
+    gzwrite                        @18
+    inflate                        @19
+    inflateEnd                     @20
+    inflateInit2_                  @21
+    inflateInit_                   @22
+    inflateReset                   @23
+    inflateSetDictionary           @24
+    inflateSync                    @25
+    uncompress                     @26
+    zlibVersion                    @27
+    gzprintf                       @28
+    gzputc                         @29
+    gzgetc                         @30
+    gzseek                         @31
+    gzrewind                       @32
+    gztell                         @33
+    gzeof                          @34
+    gzsetparams                    @35
+    zError                         @36
+    inflateSyncPoint               @37
+    get_crc_table                  @38
+    compress2                      @39
+    gzputs                         @40
+    gzgets                         @41
+
+	unzOpen                       @61
+	unzClose                      @62
+	unzGetGlobalInfo              @63
+	unzGetCurrentFileInfo         @64
+	unzGoToFirstFile              @65
+	unzGoToNextFile               @66
+	unzOpenCurrentFile            @67
+	unzReadCurrentFile            @68
+	unztell                       @70
+	unzeof                        @71
+	unzCloseCurrentFile           @72
+	unzGetGlobalComment           @73
+	unzStringFileNameCompare      @74
+	unzLocateFile                 @75
+	unzGetLocalExtrafield         @76
+
+	zipOpen                       @80
+	zipOpenNewFileInZip           @81
+	zipWriteInFileInZip           @82
+	zipCloseFileInZip             @83
+	zipClose                      @84

contrib/minizip/zlibvc.dsp

@@ -0,0 +1,651 @@
+# Microsoft Developer Studio Project File - Name="zlibvc" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 5.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102
+# TARGTYPE "Win32 (ALPHA) Dynamic-Link Library" 0x0602
+
+CFG=zlibvc - Win32 Release
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "zlibvc.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "zlibvc.mak" CFG="zlibvc - Win32 Release"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "zlibvc - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlibvc - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlibvc - Win32 ReleaseAxp" (based on\
+ "Win32 (ALPHA) Dynamic-Link Library")
+!MESSAGE "zlibvc - Win32 ReleaseWithoutAsm" (based on\
+ "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlibvc - Win32 ReleaseWithoutCrtdll" (based on\
+ "Win32 (x86) Dynamic-Link Library")
+!MESSAGE 
+
+# Begin Project
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir ".\Release"
+# PROP BASE Intermediate_Dir ".\Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir ".\Release"
+# PROP Intermediate_Dir ".\Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /FD /c
+# SUBTRACT CPP /YX
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "NDEBUG"
+# ADD RSC /l 0x40c /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /machine:I386
+# ADD LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
+# SUBTRACT LINK32 /pdb:none
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir ".\Debug"
+# PROP BASE Intermediate_Dir ".\Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir ".\Debug"
+# PROP Intermediate_Dir ".\Debug"
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /YX /c
+# ADD CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /FD /c
+# SUBTRACT CPP /YX
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "_DEBUG" /win32
+# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "_DEBUG"
+# ADD RSC /l 0x40c /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /debug /machine:I386
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /debug /machine:I386 /out:".\Debug\zlib.dll"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlibvc__"
+# PROP BASE Intermediate_Dir "zlibvc__"
+# PROP BASE Ignore_Export_Lib 0
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "zlibvc__"
+# PROP Intermediate_Dir "zlibvc__"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+CPP=cl.exe
+# ADD BASE CPP /nologo /MT /Gt0 /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /YX /FD /c
+# ADD CPP /nologo /MT /Gt0 /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /FD /c
+# SUBTRACT CPP /YX
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "NDEBUG"
+# ADD RSC /l 0x40c /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 crtdll.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /map /machine:ALPHA /nodefaultlib /out:".\Release\zlib.dll"
+# SUBTRACT BASE LINK32 /pdb:none
+# ADD LINK32 crtdll.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /map /machine:ALPHA /nodefaultlib /out:"zlibvc__\zlib.dll"
+# SUBTRACT LINK32 /pdb:none
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlibvc_0"
+# PROP BASE Intermediate_Dir "zlibvc_0"
+# PROP BASE Ignore_Export_Lib 0
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "zlibvc_0"
+# PROP Intermediate_Dir "zlibvc_0"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /YX /FD /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /FD /c
+# SUBTRACT CPP /YX
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "NDEBUG"
+# ADD RSC /l 0x40c /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
+# SUBTRACT BASE LINK32 /pdb:none
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\zlibvc_0\zlib.dll"
+# SUBTRACT LINK32 /pdb:none
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlibvc_1"
+# PROP BASE Intermediate_Dir "zlibvc_1"
+# PROP BASE Ignore_Export_Lib 0
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "zlibvc_1"
+# PROP Intermediate_Dir "zlibvc_1"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /YX /FD /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /FD /c
+# SUBTRACT CPP /YX
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "NDEBUG"
+# ADD RSC /l 0x40c /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
+# SUBTRACT BASE LINK32 /pdb:none
+# ADD LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\zlibvc_1\zlib.dll"
+# SUBTRACT LINK32 /pdb:none
+
+!ENDIF 
+
+# Begin Target
+
+# Name "zlibvc - Win32 Release"
+# Name "zlibvc - Win32 Debug"
+# Name "zlibvc - Win32 ReleaseAxp"
+# Name "zlibvc - Win32 ReleaseWithoutAsm"
+# Name "zlibvc - Win32 ReleaseWithoutCrtdll"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;hpj;bat;for;f90"
+# Begin Source File
+
+SOURCE=.\adler32.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_ADLER=\
+	".\zconf.h"\
+	".\zlib.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\compress.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_COMPR=\
+	".\zconf.h"\
+	".\zlib.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\crc32.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_CRC32=\
+	".\zconf.h"\
+	".\zlib.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\deflate.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_DEFLA=\
+	".\deflate.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\gvmat32c.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\gzio.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_GZIO_=\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\infblock.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFBL=\
+	".\infblock.h"\
+	".\infcodes.h"\
+	".\inftrees.h"\
+	".\infutil.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\infcodes.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFCO=\
+	".\infblock.h"\
+	".\infcodes.h"\
+	".\inffast.h"\
+	".\inftrees.h"\
+	".\infutil.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\inffast.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFFA=\
+	".\infblock.h"\
+	".\infcodes.h"\
+	".\inffast.h"\
+	".\inftrees.h"\
+	".\infutil.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\inflate.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFLA=\
+	".\infblock.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\inftrees.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFTR=\
+	".\inftrees.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\infutil.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFUT=\
+	".\infblock.h"\
+	".\infcodes.h"\
+	".\inftrees.h"\
+	".\infutil.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\trees.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_TREES=\
+	".\deflate.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\uncompr.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_UNCOM=\
+	".\zconf.h"\
+	".\zlib.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\unzip.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\zip.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\zlib.rc
+# End Source File
+# Begin Source File
+
+SOURCE=.\zlibvc.def
+# End Source File
+# Begin Source File
+
+SOURCE=.\zutil.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_ZUTIL=\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd"
+# Begin Source File
+
+SOURCE=.\deflate.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\infblock.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\infcodes.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\inffast.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\inftrees.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\infutil.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\zconf.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\zlib.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\zutil.h
+# End Source File
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project

contrib/minizip/zlibvc.dsw

@@ -0,0 +1,41 @@
+Microsoft Developer Studio Workspace File, Format Version 5.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "zlibstat"=.\zlibstat.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Project: "zlibvc"=.\zlibvc.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

contrib/untgz/untgz.c

@@ -9,7 +9,6 @@
 #include <stdlib.h>
 #include <string.h>
 #include <time.h>
-#include <utime.h>
 #include <errno.h>
 #include <fcntl.h>
 #ifdef unix
@@ -21,6 +20,23 @@
 
 #include "zlib.h"
 
+#ifdef WIN32
+#  ifndef F_OK
+#    define F_OK (0)
+#  endif
+#  ifdef _MSC_VER
+#    define mkdir(dirname,mode) _mkdir(dirname)
+#    define strdup(str)         _strdup(str)
+#    define unlink(fn)          _unlink(fn)
+#    define access(path,mode)   _access(path,mode)
+#  else
+#    define mkdir(dirname,mode) _mkdir(dirname)
+#  endif
+#else
+#  include <utime.h>
+#endif
+
+
 /* Values used in typeflag field.  */
 
 #define REGTYPE	 '0'		/* regular file */
@@ -83,7 +99,7 @@ char *prog;
 
 /* This will give a benign warning */
 
-static char *TGZprefix[] = { "\0", ".tgz", ".tar.gz", NULL };
+static char *TGZprefix[] = { "\0", ".tgz", ".tar.gz", ".tar", NULL };
 
 /* Return the real name of the TGZ archive */
 /* or NULL if it does not exist. */
@@ -271,14 +287,6 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
       len = gzread(in, &buffer, BLOCKSIZE);
       if (len < 0)
 	error (gzerror(in, &err));
-      /*
-       * if we met the end of the tar
-       * or the end-of-tar block,
-       * we are done
-       */
-      if ((len == 0)  || (buffer.header.name[0]== 0))
-	break;
-      
       /*
        * Always expect complete blocks to process
        * the tar information.
@@ -291,6 +299,13 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
        */
       if (getheader == 1)
 	{
+	  /*
+	   * if we met the end of the tar
+	   * or the end-of-tar block,
+	   * we are done
+	   */
+	  if ((len == 0)  || (buffer.header.name[0]== 0)) break;
+
 	  tartime = (time_t)getoct(buffer.header.mtime,12);
 	  strcpy(fname,buffer.header.name);
 	  
@@ -360,6 +375,34 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
 	      getheader = 1;
 	      if ((action == TGZ_EXTRACT) && (outfile != NULL))
 		{
+#ifdef WIN32
+		  HANDLE hFile;
+		  FILETIME ftm,ftLocal;
+		  SYSTEMTIME st;
+		  struct tm localt;
+ 
+		  fclose(outfile);
+
+		  localt = *localtime(&tartime);
+
+		  hFile = CreateFile(fname, GENERIC_READ | GENERIC_WRITE,
+				     0, NULL, OPEN_EXISTING, 0, NULL);
+		  
+		  st.wYear = (WORD)localt.tm_year+1900;
+		  st.wMonth = (WORD)localt.tm_mon;
+		  st.wDayOfWeek = (WORD)localt.tm_wday;
+		  st.wDay = (WORD)localt.tm_mday;
+		  st.wHour = (WORD)localt.tm_hour;
+		  st.wMinute = (WORD)localt.tm_min;
+		  st.wSecond = (WORD)localt.tm_sec;
+		  st.wMilliseconds = 0;
+		  SystemTimeToFileTime(&st,&ftLocal);
+		  LocalFileTimeToFileTime(&ftLocal,&ftm);
+		  SetFileTime(hFile,&ftm,NULL,&ftm);
+		  CloseHandle(hFile);
+
+		  outfile = NULL;
+#else
 		  struct utimbuf settime;
 
 		  settime.actime = settime.modtime = tartime;
@@ -367,6 +410,7 @@ int tar (gzFile in,int action,int arg,int argc,char **argv)
 		  fclose(outfile);
 		  outfile = NULL;
 		  utime(fname,&settime);
+#endif
 		}
 	    }
 	}

contrib/visual-basic.txt

@@ -1,5 +1,17 @@
+See below some functions declarations for Visual Basic.
+
+Frequently Asked Question:
+
+Q: Each time I use the compress function I get the -5 error (not enough
+   room in the output buffer).
+
+A: Make sure that the length of the compressed buffer is passed by
+   reference ("as any"), not by value ("as long"). Also check that
+   before the call of compress this length is equal to the total size of
+   the compressed buffer and not zero.
+
+
 From: "Jon Caruana" <jon-net@usa.net>
-To: "Jean-loup Gailly" <gzip@prep.ai.mit.edu>
 Subject: Re: How to port zlib declares to vb?
 Date: Mon, 28 Oct 1996 18:33:03 -0600
 

deflate.c

@@ -52,7 +52,7 @@
 #include "deflate.h"
 
 const char deflate_copyright[] =
-   " deflate 1.0.9 Copyright 1995-1998 Jean-loup Gailly ";
+   " deflate 1.1.3 Copyright 1995-1998 Jean-loup Gailly ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -160,14 +160,23 @@ struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
  * Insert string str in the dictionary and set match_head to the previous head
  * of the hash chain (the most recent string with same hash key). Return
  * the previous length of the hash chain.
+ * If this file is compiled with -DFASTEST, the compression level is forced
+ * to 1, and no hash chains are maintained.
  * IN  assertion: all calls to to INSERT_STRING are made with consecutive
  *    input characters and the first MIN_MATCH bytes of str are valid
  *    (except for the last MIN_MATCH-1 bytes of the input file).
  */
+#ifdef FASTEST
+#define INSERT_STRING(s, str, match_head) \
+   (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
+    match_head = s->head[s->ins_h], \
+    s->head[s->ins_h] = (Pos)(str))
+#else
 #define INSERT_STRING(s, str, match_head) \
    (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
     s->prev[(str) & s->w_mask] = match_head = s->head[s->ins_h], \
     s->head[s->ins_h] = (Pos)(str))
+#endif
 
 /* ===========================================================================
  * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
@@ -224,6 +233,9 @@ int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
     if (strm->zfree == Z_NULL) strm->zfree = zcfree;
 
     if (level == Z_DEFAULT_COMPRESSION) level = 6;
+#ifdef FASTEST
+    level = 1;
+#endif
 
     if (windowBits < 0) { /* undocumented feature: suppress zlib header */
         noheader = 1;
@@ -596,11 +608,13 @@ int ZEXPORT deflateCopy (dest, source)
     deflate_state *ss;
     ushf *overlay;
 
-    ss = source->state;
 
-    if (source == Z_NULL || dest == Z_NULL || ss == Z_NULL) {
+    if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) {
         return Z_STREAM_ERROR;
     }
+
+    ss = source->state;
+
     *dest = *source;
 
     ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
@@ -708,6 +722,7 @@ local void lm_init (s)
 /* For 80x86 and 680x0, an optimized version will be provided in match.asm or
  * match.S. The code will be functionally equivalent.
  */
+#ifndef FASTEST
 local uInt longest_match(s, cur_match)
     deflate_state *s;
     IPos cur_match;                             /* current match */
@@ -845,6 +860,64 @@ local uInt longest_match(s, cur_match)
     if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
     return s->lookahead;
 }
+
+#else /* FASTEST */
+/* ---------------------------------------------------------------------------
+ * Optimized version for level == 1 only
+ */
+local uInt longest_match(s, cur_match)
+    deflate_state *s;
+    IPos cur_match;                             /* current match */
+{
+    register Bytef *scan = s->window + s->strstart; /* current string */
+    register Bytef *match;                       /* matched string */
+    register int len;                           /* length of current match */
+    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
+
+    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+     * It is easy to get rid of this optimization if necessary.
+     */
+    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
+
+    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
+
+    Assert(cur_match < s->strstart, "no future");
+
+    match = s->window + cur_match;
+
+    /* Return failure if the match length is less than 2:
+     */
+    if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1;
+
+    /* The check at best_len-1 can be removed because it will be made
+     * again later. (This heuristic is not always a win.)
+     * It is not necessary to compare scan[2] and match[2] since they
+     * are always equal when the other bytes match, given that
+     * the hash keys are equal and that HASH_BITS >= 8.
+     */
+    scan += 2, match += 2;
+    Assert(*scan == *match, "match[2]?");
+
+    /* We check for insufficient lookahead only every 8th comparison;
+     * the 256th check will be made at strstart+258.
+     */
+    do {
+    } while (*++scan == *++match && *++scan == *++match &&
+	     *++scan == *++match && *++scan == *++match &&
+	     *++scan == *++match && *++scan == *++match &&
+	     *++scan == *++match && *++scan == *++match &&
+	     scan < strend);
+
+    Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+
+    len = MAX_MATCH - (int)(strend - scan);
+
+    if (len < MIN_MATCH) return MIN_MATCH - 1;
+
+    s->match_start = cur_match;
+    return len <= s->lookahead ? len : s->lookahead;
+}
+#endif /* FASTEST */
 #endif /* ASMV */
 
 #ifdef DEBUG
@@ -930,6 +1003,7 @@ local void fill_window(s)
 	    } while (--n);
 
 	    n = wsize;
+#ifndef FASTEST
 	    p = &s->prev[n];
 	    do {
 		m = *--p;
@@ -938,6 +1012,7 @@ local void fill_window(s)
 		 * its value will never be used.
 		 */
 	    } while (--n);
+#endif
             more += wsize;
         }
         if (s->strm->avail_in == 0) return;
@@ -1105,14 +1180,15 @@ local block_state deflate_fast(s, flush)
         if (s->match_length >= MIN_MATCH) {
             check_match(s, s->strstart, s->match_start, s->match_length);
 
-            bflush = _tr_tally(s, s->strstart - s->match_start,
+            _tr_tally_dist(s, s->strstart - s->match_start,
-                               s->match_length - MIN_MATCH);
+                           s->match_length - MIN_MATCH, bflush);
 
             s->lookahead -= s->match_length;
 
             /* Insert new strings in the hash table only if the match length
              * is not too large. This saves time but degrades compression.
              */
+#ifndef FASTEST
             if (s->match_length <= s->max_insert_length &&
                 s->lookahead >= MIN_MATCH) {
                 s->match_length--; /* string at strstart already in hash table */
@@ -1124,7 +1200,9 @@ local block_state deflate_fast(s, flush)
                      */
                 } while (--s->match_length != 0);
                 s->strstart++; 
-            } else {
+            } else
+#endif
+	    {
                 s->strstart += s->match_length;
                 s->match_length = 0;
                 s->ins_h = s->window[s->strstart];
@@ -1139,7 +1217,7 @@ local block_state deflate_fast(s, flush)
         } else {
             /* No match, output a literal byte */
             Tracevv((stderr,"%c", s->window[s->strstart]));
-            bflush = _tr_tally (s, 0, s->window[s->strstart]);
+            _tr_tally_lit (s, s->window[s->strstart], bflush);
             s->lookahead--;
             s->strstart++; 
         }
@@ -1218,8 +1296,8 @@ local block_state deflate_slow(s, flush)
 
             check_match(s, s->strstart-1, s->prev_match, s->prev_length);
 
-            bflush = _tr_tally(s, s->strstart -1 - s->prev_match,
+            _tr_tally_dist(s, s->strstart -1 - s->prev_match,
-                               s->prev_length - MIN_MATCH);
+			   s->prev_length - MIN_MATCH, bflush);
 
             /* Insert in hash table all strings up to the end of the match.
              * strstart-1 and strstart are already inserted. If there is not
@@ -1245,7 +1323,8 @@ local block_state deflate_slow(s, flush)
              * is longer, truncate the previous match to a single literal.
              */
             Tracevv((stderr,"%c", s->window[s->strstart-1]));
-            if (_tr_tally (s, 0, s->window[s->strstart-1])) {
+	    _tr_tally_lit(s, s->window[s->strstart-1], bflush);
+	    if (bflush) {
                 FLUSH_BLOCK_ONLY(s, 0);
             }
             s->strstart++;
@@ -1263,7 +1342,7 @@ local block_state deflate_slow(s, flush)
     Assert (flush != Z_NO_FLUSH, "no flush?");
     if (s->match_available) {
         Tracevv((stderr,"%c", s->window[s->strstart-1]));
-        _tr_tally (s, 0, s->window[s->strstart-1]);
+        _tr_tally_lit(s, s->window[s->strstart-1], bflush);
         s->match_available = 0;
     }
     FLUSH_BLOCK(s, flush == Z_FINISH);

deflate.h

@@ -230,12 +230,12 @@ typedef struct internal_state {
 
     ulg opt_len;        /* bit length of current block with optimal trees */
     ulg static_len;     /* bit length of current block with static trees */
-    ulg compressed_len; /* total bit length of compressed file */
     uInt matches;       /* number of string matches in current block */
     int last_eob_len;   /* bit length of EOB code for last block */
 
 #ifdef DEBUG
-    ulg bits_sent;      /* bit length of the compressed data */
+    ulg compressed_len; /* total bit length of compressed file mod 2^32 */
+    ulg bits_sent;      /* bit length of compressed data sent mod 2^32 */
 #endif
 
     ush bi_buf;
@@ -268,9 +268,51 @@ typedef struct internal_state {
         /* in trees.c */
 void _tr_init         OF((deflate_state *s));
 int  _tr_tally        OF((deflate_state *s, unsigned dist, unsigned lc));
-ulg  _tr_flush_block  OF((deflate_state *s, charf *buf, ulg stored_len,
+void _tr_flush_block  OF((deflate_state *s, charf *buf, ulg stored_len,
 			  int eof));
 void _tr_align        OF((deflate_state *s));
 void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
                           int eof));
+
+#define d_code(dist) \
+   ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
+/* Mapping from a distance to a distance code. dist is the distance - 1 and
+ * must not have side effects. _dist_code[256] and _dist_code[257] are never
+ * used.
+ */
+
+#ifndef DEBUG
+/* Inline versions of _tr_tally for speed: */
+
+#if defined(GEN_TREES_H) || !defined(STDC)
+  extern uch _length_code[];
+  extern uch _dist_code[];
+#else
+  extern const uch _length_code[];
+  extern const uch _dist_code[];
+#endif
+
+# define _tr_tally_lit(s, c, flush) \
+  { uch cc = (c); \
+    s->d_buf[s->last_lit] = 0; \
+    s->l_buf[s->last_lit++] = cc; \
+    s->dyn_ltree[cc].Freq++; \
+    flush = (s->last_lit == s->lit_bufsize-1); \
+   }
+# define _tr_tally_dist(s, distance, length, flush) \
+  { uch len = (length); \
+    ush dist = (distance); \
+    s->d_buf[s->last_lit] = dist; \
+    s->l_buf[s->last_lit++] = len; \
+    dist--; \
+    s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \
+    s->dyn_dtree[d_code(dist)].Freq++; \
+    flush = (s->last_lit == s->lit_bufsize-1); \
+  }
+#else
+# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c)
+# define _tr_tally_dist(s, distance, length, flush) \
+              flush = _tr_tally(s, distance, length) 
+#endif
+
 #endif

example.c

@@ -15,6 +15,12 @@
    extern void exit  OF((int));
 #endif
 
+#if defined(VMS) || defined(RISCOS)
+#  define TESTFILE "foo-gz"
+#else
+#  define TESTFILE "foo.gz"
+#endif
+
 #define CHECK_ERR(err, msg) { \
     if (err != Z_OK) { \
         fprintf(stderr, "%s error: %d\n", msg, err); \
@@ -71,7 +77,7 @@ void test_compress(compr, comprLen, uncompr, uncomprLen)
         fprintf(stderr, "bad uncompress\n");
 	exit(1);
     } else {
-        printf("uncompress(): %s\n", uncompr);
+        printf("uncompress(): %s\n", (char *)uncompr);
     }
 }
 
@@ -79,8 +85,8 @@ void test_compress(compr, comprLen, uncompr, uncomprLen)
  * Test read/write of .gz files
  */
 void test_gzio(out, in, uncompr, uncomprLen)
-    const char *out; /* output file */
+    const char *out; /* compressed output file */
-    const char *in;  /* input file */
+    const char *in;  /* compressed input file */
     Byte *uncompr;
     int  uncomprLen;
 {
@@ -121,13 +127,13 @@ void test_gzio(out, in, uncompr, uncomprLen)
         fprintf(stderr, "bad gzread: %s\n", (char*)uncompr);
 	exit(1);
     } else {
-        printf("gzread(): %s\n", uncompr);
+        printf("gzread(): %s\n", (char *)uncompr);
     }
 
     pos = gzseek(file, -8L, SEEK_CUR);
     if (pos != 6 || gztell(file) != pos) {
 	fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n",
-		pos, gztell(file));
+		(long)pos, (long)gztell(file));
 	exit(1);
     }
 
@@ -146,7 +152,7 @@ void test_gzio(out, in, uncompr, uncomprLen)
         fprintf(stderr, "bad gzgets after gzseek\n");
 	exit(1);
     } else {
-        printf("gzgets() after gzseek: %s\n", uncompr);
+        printf("gzgets() after gzseek: %s\n", (char *)uncompr);
     }
 
     gzclose(file);
@@ -227,7 +233,7 @@ void test_inflate(compr, comprLen, uncompr, uncomprLen)
         fprintf(stderr, "bad inflate\n");
 	exit(1);
     } else {
-        printf("inflate(): %s\n", uncompr);
+        printf("inflate(): %s\n", (char *)uncompr);
     }
 }
 
@@ -406,7 +412,7 @@ void test_sync(compr, comprLen, uncompr, uncomprLen)
     err = inflateEnd(&d_stream);
     CHECK_ERR(err, "inflateEnd");
 
-    printf("after inflateSync(): hel%s\n", uncompr);
+    printf("after inflateSync(): hel%s\n", (char *)uncompr);
 }
 
 /* ===========================================================================
@@ -492,7 +498,7 @@ void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
         fprintf(stderr, "bad inflate with dict\n");
 	exit(1);
     } else {
-        printf("inflate with dictionary: %s\n", uncompr);
+        printf("inflate with dictionary: %s\n", (char *)uncompr);
     }
 }
 
@@ -528,8 +534,8 @@ int main(argc, argv)
     }
     test_compress(compr, comprLen, uncompr, uncomprLen);
 
-    test_gzio((argc > 1 ? argv[1] : "foo.gz"),
+    test_gzio((argc > 1 ? argv[1] : TESTFILE),
-              (argc > 2 ? argv[2] : "foo.gz"),
+              (argc > 2 ? argv[2] : TESTFILE),
 	      uncompr, (int)uncomprLen);
 
     test_deflate(compr, comprLen);

gzio.c

@@ -13,7 +13,16 @@
 
 struct internal_state {int dummy;}; /* for buggy compilers */
 
-#define Z_BUFSIZE 4096
+#ifndef Z_BUFSIZE
+#  ifdef MAXSEG_64K
+#    define Z_BUFSIZE 4096 /* minimize memory usage for 16-bit DOS */
+#  else
+#    define Z_BUFSIZE 16384
+#  endif
+#endif
+#ifndef Z_PRINTF_BUFSIZE
+#  define Z_PRINTF_BUFSIZE 4096
+#endif
 
 #define ALLOC(size) malloc(size)
 #define TRYFREE(p) {if (p) free(p);}
@@ -131,8 +140,12 @@ local gzFile gz_open (path, mode, fd)
         s->stream.next_in  = s->inbuf = (Byte*)ALLOC(Z_BUFSIZE);
 
         err = inflateInit2(&(s->stream), -MAX_WBITS);
-        /* windowBits is passed < 0 to tell that there is no zlib header */
+        /* windowBits is passed < 0 to tell that there is no zlib header.
-
+         * Note that in this case inflate *requires* an extra "dummy" byte
+         * after the compressed stream in order to complete decompression and
+         * return Z_STREAM_END. Here the gzip CRC32 ensures that 4 bytes are
+         * present after the compressed stream.
+         */
         if (err != Z_OK || s->inbuf == Z_NULL) {
             return destroy(s), (gzFile)Z_NULL;
         }
@@ -378,6 +391,7 @@ int ZEXPORT gzread (file, buf, len)
 	    len -= s->stream.avail_out;
 	    s->stream.total_in  += (uLong)len;
 	    s->stream.total_out += (uLong)len;
+            if (len == 0) s->z_eof = 1;
 	    return (int)len;
 	}
         if (s->stream.avail_in == 0 && !s->z_eof) {
@@ -400,10 +414,14 @@ int ZEXPORT gzread (file, buf, len)
 	    s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
 	    start = s->stream.next_out;
 
-	    if (getLong(s) != s->crc || getLong(s) != s->stream.total_out) {
+	    if (getLong(s) != s->crc) {
 		s->z_err = Z_DATA_ERROR;
 	    } else {
-		/* Check for concatenated .gz files: */
+	        (void)getLong(s);
+                /* The uncompressed length returned by above getlong() may
+                 * be different from s->stream.total_out) in case of
+		 * concatenated .gz files. Check for such files:
+		 */
 		check_header(s);
 		if (s->z_err == Z_OK) {
 		    uLong total_in = s->stream.total_in;
@@ -506,7 +524,7 @@ int ZEXPORT gzwrite (file, buf, len)
 
 int ZEXPORTVA gzprintf (gzFile file, const char *format, /* args */ ...)
 {
-    char buf[Z_BUFSIZE];
+    char buf[Z_PRINTF_BUFSIZE];
     va_list va;
     int len;
 
@@ -531,7 +549,7 @@ int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
     int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
 	a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
 {
-    char buf[Z_BUFSIZE];
+    char buf[Z_PRINTF_BUFSIZE];
     int len;
 
 #ifdef HAS_snprintf
@@ -571,7 +589,7 @@ int ZEXPORT gzputs(file, s)
     gzFile file;
     const char *s;
 {
-    return gzwrite(file, (const voidp)s, (unsigned)strlen(s));
+    return gzwrite(file, (char*)s, (unsigned)strlen(s));
 }
 
 
@@ -656,7 +674,7 @@ z_off_t ZEXPORT gzseek (file, offset, whence)
 	return -1L;
 #else
 	if (whence == SEEK_SET) {
-	    offset -= s->stream.total_out;
+	    offset -= s->stream.total_in;
 	}
 	if (offset < 0) return -1L;
 
@@ -731,6 +749,7 @@ int ZEXPORT gzrewind (file)
     s->z_eof = 0;
     s->stream.avail_in = 0;
     s->stream.next_in = s->inbuf;
+    s->crc = crc32(0L, Z_NULL, 0);
 	
     if (s->startpos == 0) { /* not a compressed file */
 	rewind(s->file);
@@ -779,7 +798,8 @@ local void putLong (file, x)
 }
 
 /* ===========================================================================
-   Reads a long in LSB order from the given gz_stream. Sets 
+   Reads a long in LSB order from the given gz_stream. Sets z_err in case
+   of error.
 */
 local uLong getLong (s)
     gz_stream *s;

infblock.c

@@ -11,6 +11,10 @@
 
 struct inflate_codes_state {int dummy;}; /* for buggy compilers */
 
+/* simplify the use of the inflate_huft type with some defines */
+#define exop word.what.Exop
+#define bits word.what.Bits
+
 /* Table for deflate from PKZIP's appnote.txt. */
 local const uInt border[] = { /* Order of the bit length code lengths */
         16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
@@ -264,8 +268,8 @@ int r;
         t = s->sub.trees.bb;
         NEEDBITS(t)
         h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]);
-        t = h->word.what.Bits;
+        t = h->bits;
-        c = h->more.Base;
+        c = h->base;
         if (c < 16)
         {
           DUMPBITS(t)
@@ -341,13 +345,6 @@ int r;
         s->mode = TYPE;
         break;
       }
-      if (k > 7)              /* return unused byte, if any */
-      {
-        Assert(k < 16, "inflate_codes grabbed too many bytes")
-        k -= 8;
-        n++;
-        p--;                    /* can always return one */
-      }
       s->mode = DRY;
     case DRY:
       FLUSH

infcodes.c

@@ -11,8 +11,6 @@
 #include "inffast.h"
 
 /* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
 #define exop word.what.Exop
 #define bits word.what.Bits
 
@@ -145,7 +143,7 @@ int r;
       if ((e & 64) == 0)        /* next table */
       {
         c->sub.code.need = e;
-        c->sub.code.tree = t->next;
+        c->sub.code.tree = t + t->base;
         break;
       }
       if (e & 32)               /* end of block */
@@ -183,7 +181,7 @@ int r;
       if ((e & 64) == 0)        /* next table */
       {
         c->sub.code.need = e;
-        c->sub.code.tree = t->next;
+        c->sub.code.tree = t + t->base;
         break;
       }
       c->mode = BADCODE;        /* invalid code */
@@ -223,6 +221,13 @@ int r;
       c->mode = START;
       break;
     case WASH:          /* o: got eob, possibly more output */
+      if (k > 7)        /* return unused byte, if any */
+      {
+        Assert(k < 16, "inflate_codes grabbed too many bytes")
+        k -= 8;
+        n++;
+        p--;            /* can always return one */
+      }
       FLUSH
       if (s->read != s->write)
         LEAVE

inffast.c

@@ -13,14 +13,12 @@
 struct inflate_codes_state {int dummy;}; /* for buggy compilers */
 
 /* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
 #define exop word.what.Exop
 #define bits word.what.Bits
 
 /* macros for bit input with no checking and for returning unused bytes */
 #define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define UNGRAB {n+=(c=k>>3);p-=c;k&=7;}
+#define UNGRAB {c=z->avail_in-n;c=(k>>3)<c?k>>3:c;n+=c;p-=c;k-=c<<3;}
 
 /* Called with number of bytes left to write in window at least 258
    (the maximum string length) and number of input bytes available
@@ -120,7 +118,10 @@ z_streamp z;
             break;
           }
           else if ((e & 64) == 0)
-            e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop;
+          {
+            t += t->base;
+            e = (t += ((uInt)b & inflate_mask[e]))->exop;
+          }
           else
           {
             z->msg = (char*)"invalid distance code";
@@ -133,7 +134,8 @@ z_streamp z;
       }
       if ((e & 64) == 0)
       {
-        if ((e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop) == 0)
+        t += t->base;
+        if ((e = (t += ((uInt)b & inflate_mask[e]))->exop) == 0)
         {
           DUMPBITS(t->bits)
           Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?

inffixed.h

@@ -0,0 +1,151 @@
+/* inffixed.h -- table for decoding fixed codes
+ * Generated automatically by the maketree.c program
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+local uInt fixed_bl = 9;
+local uInt fixed_bd = 5;
+local inflate_huft fixed_tl[] = {
+    {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},
+    {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},192},
+    {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},160},
+    {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},224},
+    {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},144},
+    {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},208},
+    {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},176},
+    {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},240},
+    {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},
+    {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},200},
+    {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},168},
+    {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},232},
+    {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},152},
+    {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},216},
+    {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},184},
+    {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},248},
+    {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},
+    {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},196},
+    {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},164},
+    {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},228},
+    {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},148},
+    {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},212},
+    {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},180},
+    {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},244},
+    {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},
+    {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},204},
+    {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},172},
+    {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},236},
+    {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},156},
+    {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},220},
+    {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},188},
+    {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},252},
+    {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},
+    {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},194},
+    {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},162},
+    {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},226},
+    {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},146},
+    {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},210},
+    {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},178},
+    {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},242},
+    {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},
+    {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},202},
+    {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},170},
+    {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},234},
+    {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},154},
+    {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},218},
+    {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},186},
+    {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},250},
+    {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},
+    {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},198},
+    {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},166},
+    {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},230},
+    {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},150},
+    {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},214},
+    {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},182},
+    {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},246},
+    {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},
+    {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},206},
+    {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},174},
+    {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},238},
+    {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},158},
+    {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},222},
+    {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},190},
+    {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},254},
+    {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},
+    {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},193},
+    {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},161},
+    {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},225},
+    {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},145},
+    {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},209},
+    {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},177},
+    {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},241},
+    {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},
+    {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},201},
+    {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},169},
+    {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},233},
+    {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},153},
+    {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},217},
+    {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},185},
+    {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},249},
+    {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},
+    {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},197},
+    {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},165},
+    {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},229},
+    {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},149},
+    {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},213},
+    {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},181},
+    {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},245},
+    {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},
+    {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},205},
+    {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},173},
+    {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},237},
+    {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},157},
+    {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},221},
+    {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},189},
+    {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},253},
+    {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},
+    {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},195},
+    {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},163},
+    {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},227},
+    {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},147},
+    {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},211},
+    {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},179},
+    {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},243},
+    {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},
+    {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},203},
+    {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},171},
+    {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},235},
+    {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},155},
+    {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},219},
+    {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},187},
+    {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},251},
+    {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},
+    {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},199},
+    {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},167},
+    {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},231},
+    {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},151},
+    {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},215},
+    {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},183},
+    {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},247},
+    {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},
+    {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},207},
+    {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},175},
+    {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},239},
+    {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},159},
+    {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},223},
+    {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},191},
+    {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},255}
+  };
+local inflate_huft fixed_td[] = {
+    {{{80,5}},1}, {{{87,5}},257}, {{{83,5}},17}, {{{91,5}},4097},
+    {{{81,5}},5}, {{{89,5}},1025}, {{{85,5}},65}, {{{93,5}},16385},
+    {{{80,5}},3}, {{{88,5}},513}, {{{84,5}},33}, {{{92,5}},8193},
+    {{{82,5}},9}, {{{90,5}},2049}, {{{86,5}},129}, {{{192,5}},24577},
+    {{{80,5}},2}, {{{87,5}},385}, {{{83,5}},25}, {{{91,5}},6145},
+    {{{81,5}},7}, {{{89,5}},1537}, {{{85,5}},97}, {{{93,5}},24577},
+    {{{80,5}},4}, {{{88,5}},769}, {{{84,5}},49}, {{{92,5}},12289},
+    {{{82,5}},13}, {{{90,5}},3073}, {{{86,5}},193}, {{{192,5}},24577}
+  };

inflate.c

@@ -229,6 +229,7 @@ int f;
         r = f;
       if (r != Z_STREAM_END)
         return r;
+      r = f;
       inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
       if (z->state->nowrap)
       {
@@ -322,7 +323,8 @@ z_streamp z;
   /* search */
   while (n && m < 4)
   {
-    if (*p == (Byte)(m < 2 ? 0 : (Byte)0xff))
+    static const Byte mark[4] = {0, 0, 0xff, 0xff};
+    if (*p == mark[m])
       m++;
     else if (*p)
       m = 0;

inftrees.c

@@ -6,8 +6,12 @@
 #include "zutil.h"
 #include "inftrees.h"
 
+#if !defined(BUILDFIXED) && !defined(STDC)
+#  define BUILDFIXED   /* non ANSI compilers may not accept inffixed.h */
+#endif
+
 const char inflate_copyright[] =
-   " inflate 1.0.9 Copyright 1995-1998 Mark Adler ";
+   " inflate 1.1.3 Copyright 1995-1998 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -17,8 +21,6 @@ const char inflate_copyright[] =
 struct internal_state  {int dummy;}; /* for buggy compilers */
 
 /* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
 #define exop word.what.Exop
 #define bits word.what.Bits
 
@@ -232,11 +234,6 @@ uIntf *v;               /* working area: values in order of bit length */
           return Z_MEM_ERROR;   /* not enough memory */
         u[h] = q = hp + *hn;
         *hn += z;
-        if (t != Z_NULL)        /* first table is returned result */
-        {
-          *t = q;
-          t = Z_NULL;
-        }
 
         /* connect to last table, if there is one */
         if (h)
@@ -244,10 +241,12 @@ uIntf *v;               /* working area: values in order of bit length */
           x[h] = i;             /* save pattern for backing up */
           r.bits = (Byte)l;     /* bits to dump before this table */
           r.exop = (Byte)j;     /* bits in this table */
-          r.next = q;           /* pointer to this table */
+          j = i >> (w - l);
-          j = i >> (w - l);     /* (get around Turbo C bug) */
+          r.base = (uInt)(q - u[h-1] - j);   /* offset to this table */
           u[h-1][j] = r;        /* connect to last table */
         }
+        else
+          *t = q;               /* first table is returned result */
       }
 
       /* set up table entry in r */
@@ -384,13 +383,17 @@ z_streamp z;            /* for messages */
 
 
 /* build fixed tables only once--keep them here */
+#ifdef BUILDFIXED
 local int fixed_built = 0;
-#define FIXEDH 424      /* number of hufts used by fixed tables */
+#define FIXEDH 544      /* number of hufts used by fixed tables */
 local inflate_huft fixed_mem[FIXEDH];
 local uInt fixed_bl;
 local uInt fixed_bd;
 local inflate_huft *fixed_tl;
 local inflate_huft *fixed_td;
+#else
+#include "inffixed.h"
+#endif
 
 
 int inflate_trees_fixed(bl, bd, tl, td, z)
@@ -400,7 +403,8 @@ inflate_huft * FAR *tl;  /* literal/length tree result */
 inflate_huft * FAR *td;  /* distance tree result */
 z_streamp z;             /* for memory allocation */
 {
-  /* build fixed tables if not already (multiple overlapped executions ok) */
+#ifdef BUILDFIXED
+  /* build fixed tables if not already */
   if (!fixed_built)
   {
     int k;              /* temporary variable */
@@ -426,7 +430,7 @@ z_streamp z;             /* for memory allocation */
       c[k] = 7;
     for (; k < 288; k++)
       c[k] = 8;
-    fixed_bl = 7;
+    fixed_bl = 9;
     huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl,
                fixed_mem, &f, v);
 
@@ -442,6 +446,7 @@ z_streamp z;             /* for memory allocation */
     ZFREE(z, c);
     fixed_built = 1;
   }
+#endif
   *bl = fixed_bl;
   *bd = fixed_bd;
   *tl = fixed_tl;

inftrees.h

@@ -19,17 +19,15 @@ struct inflate_huft_s {
       Byte Exop;        /* number of extra bits or operation */
       Byte Bits;        /* number of bits in this code or subcode */
     } what;
-    Bytef *pad;         /* pad structure to a power of 2 (4 bytes for */
+    uInt pad;           /* pad structure to a power of 2 (4 bytes for */
-  } word;               /*  16-bit, 8 bytes for 32-bit machines) */
+  } word;               /*  16-bit, 8 bytes for 32-bit int's) */
-  union {
+  uInt base;            /* literal, length base, distance base,
-    uInt Base;          /* literal, length base, or distance base */
+                           or table offset */
-    inflate_huft *Next; /* pointer to next level of table */
-  } more;
 };
 
 /* Maximum size of dynamic tree.  The maximum found in a long but non-
-   exhaustive search was 1041 huft structures (875 for length/literals
+   exhaustive search was 1004 huft structures (850 for length/literals
-   and 166 for distances, the latter actually the result of an
+   and 154 for distances, the latter actually the result of an
    exhaustive search).  The actual maximum is not known, but the
    value below is more than safe. */
 #define MANY 1440

maketree.c

@@ -0,0 +1,85 @@
+/* maketree.c -- make inffixed.h table for decoding fixed codes
+ * Copyright (C) 1998 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* This program is included in the distribution for completeness.
+   You do not need to compile or run this program since inffixed.h
+   is already included in the distribution.  To use this program
+   you need to compile zlib with BUILDFIXED defined and then compile
+   and link this program with the zlib library.  Then the output of
+   this program can be piped to inffixed.h. */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include "zutil.h"
+#include "inftrees.h"
+
+/* simplify the use of the inflate_huft type with some defines */
+#define exop word.what.Exop
+#define bits word.what.Bits
+
+/* generate initialization table for an inflate_huft structure array */
+void maketree(uInt b, inflate_huft *t)
+{
+  int i, e;
+
+  i = 0;
+  while (1)
+  {
+    e = t[i].exop;
+    if (e && (e & (16+64)) == 0)        /* table pointer */
+    {
+      fprintf(stderr, "maketree: cannot initialize sub-tables!\n");
+      exit(1);
+    }
+    if (i % 4 == 0)
+      printf("\n   ");
+    printf(" {{{%u,%u}},%u}", t[i].exop, t[i].bits, t[i].base);
+    if (++i == (1<<b))
+      break;
+    putchar(',');
+  }
+  puts("");
+}
+
+/* create the fixed tables in C initialization syntax */
+void main(void)
+{
+  int r;
+  uInt bl, bd;
+  inflate_huft *tl, *td;
+  z_stream z;
+
+  z.zalloc = zcalloc;
+  z.opaque = (voidpf)0;
+  z.zfree = zcfree;
+  r = inflate_trees_fixed(&bl, &bd, &tl, &td, &z);
+  if (r)
+  {
+    fprintf(stderr, "inflate_trees_fixed error %d\n", r);
+    return;
+  }
+  puts("/* inffixed.h -- table for decoding fixed codes");
+  puts(" * Generated automatically by the maketree.c program");
+  puts(" */");
+  puts("");
+  puts("/* WARNING: this file should *not* be used by applications. It is");
+  puts("   part of the implementation of the compression library and is");
+  puts("   subject to change. Applications should only use zlib.h.");
+  puts(" */");
+  puts("");
+  printf("local uInt fixed_bl = %d;\n", bl);
+  printf("local uInt fixed_bd = %d;\n", bd);
+  printf("local inflate_huft fixed_tl[] = {");
+  maketree(bl, tl);
+  puts("  };");
+  printf("local inflate_huft fixed_td[] = {");
+  maketree(bd, td);
+  puts("  };");
+}

minigzip.c

@@ -25,6 +25,11 @@
    extern void exit  OF((int));
 #endif
 
+#ifdef USE_MMAP
+#  include <sys/types.h>
+#  include <sys/mman.h>
+#  include <sys/stat.h>
+#endif
 
 #if defined(MSDOS) || defined(OS2) || defined(WIN32)
 #  include <fcntl.h>
@@ -43,6 +48,9 @@
 #  define GZ_SUFFIX "-gz"
 #  define fileno(file) file->__file
 #endif
+#if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
+#  include <unix.h> /* for fileno */
+#endif
 
 #ifndef WIN32 /* unlink already in stdio.h for WIN32 */
   extern int unlink OF((const char *));
@@ -53,7 +61,7 @@
 #endif
 #define SUFFIX_LEN (sizeof(GZ_SUFFIX)-1)
 
-#define BUFLEN 4096
+#define BUFLEN      16384
 #define MAX_NAME_LEN 1024
 
 #ifdef MAXSEG_64K
@@ -65,12 +73,15 @@
 
 char *prog;
 
-void error           OF((const char *msg));
+void error            OF((const char *msg));
-void gz_compress     OF((FILE   *in, gzFile out));
+void gz_compress      OF((FILE   *in, gzFile out));
-void gz_uncompress   OF((gzFile in, FILE   *out));
+#ifdef USE_MMAP
-void file_compress   OF((char  *file, char *mode));
+int  gz_compress_mmap OF((FILE   *in, gzFile out));
-void file_uncompress OF((char  *file));
+#endif
-int  main            OF((int argc, char *argv[]));
+void gz_uncompress    OF((gzFile in, FILE   *out));
+void file_compress    OF((char  *file, char *mode));
+void file_uncompress  OF((char  *file));
+int  main             OF((int argc, char *argv[]));
 
 /* ===========================================================================
  * Display error message and exit
@@ -85,6 +96,7 @@ void error(msg)
 /* ===========================================================================
  * Compress input to output then close both files.
  */
+
 void gz_compress(in, out)
     FILE   *in;
     gzFile out;
@@ -93,6 +105,12 @@ void gz_compress(in, out)
     int len;
     int err;
 
+#ifdef USE_MMAP
+    /* Try first compressing with mmap. If mmap fails (minigzip used in a
+     * pipe), use the normal fread loop.
+     */
+    if (gz_compress_mmap(in, out) == Z_OK) return;
+#endif
     for (;;) {
         len = fread(buf, 1, sizeof(buf), in);
         if (ferror(in)) {
@@ -107,6 +125,43 @@ void gz_compress(in, out)
     if (gzclose(out) != Z_OK) error("failed gzclose");
 }
 
+#ifdef USE_MMAP /* MMAP version, Miguel Albrecht <malbrech@eso.org> */
+
+/* Try compressing the input file at once using mmap. Return Z_OK if
+ * if success, Z_ERRNO otherwise.
+ */
+int gz_compress_mmap(in, out)
+    FILE   *in;
+    gzFile out;
+{
+    int len;
+    int err;
+    int ifd = fileno(in);
+    caddr_t buf;    /* mmap'ed buffer for the entire input file */
+    off_t buf_len;  /* length of the input file */
+    struct stat sb;
+
+    /* Determine the size of the file, needed for mmap: */
+    if (fstat(ifd, &sb) < 0) return Z_ERRNO;
+    buf_len = sb.st_size;
+    if (buf_len <= 0) return Z_ERRNO;
+
+    /* Now do the actual mmap: */
+    buf = mmap((caddr_t) 0, buf_len, PROT_READ, MAP_SHARED, ifd, (off_t)0); 
+    if (buf == (caddr_t)(-1)) return Z_ERRNO;
+
+    /* Compress the whole file at once: */
+    len = gzwrite(out, (char *)buf, (unsigned)buf_len);
+
+    if (len != (int)buf_len) error(gzerror(out, &err));
+
+    munmap(buf, buf_len);
+    fclose(in);
+    if (gzclose(out) != Z_OK) error("failed gzclose");
+    return Z_OK;
+}
+#endif /* USE_MMAP */
+
 /* ===========================================================================
  * Uncompress input to output then close both files.
  */

msdos/Makefile.b32

@@ -33,13 +33,13 @@ OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
 
 all: test
 
-adler32.obj: adler32.c zutil.h zlib.h zconf.h
+adler32.obj: adler32.c zlib.h zconf.h
 	$(CC) -c $(CFLAGS) $*.c
 
 compress.obj: compress.c zlib.h zconf.h
 	$(CC) -c $(CFLAGS) $*.c
 
-crc32.obj: crc32.c zutil.h zlib.h zconf.h
+crc32.obj: crc32.c zlib.h zconf.h
 	$(CC) -c $(CFLAGS) $*.c
 
 deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h

msdos/Makefile.bor

@@ -2,24 +2,40 @@
 # Borland C++   ************ UNTESTED ***********
 
 # To use, do "make -fmakefile.bor"
-# To compile in small model, set below: MODEL=-ms
+# To compile in small model, set below: MODEL=s
 
 # WARNING: the small model is supported but only for small values of
 # MAX_WBITS and MAX_MEM_LEVEL. For example:
 #    -DMAX_WBITS=11 -DDEF_WBITS=11 -DMAX_MEM_LEVEL=3
 # If you wish to reduce the memory requirements (default 256K for big
-# objects plus a few K), you can add to CFLAGS below: 
+# objects plus a few K), you can add to the LOC macro below:
 #   -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
 # See zconf.h for details about the memory requirements.
 
 # ------------- Turbo C++, Borland C++ -------------
-MODEL=-ml
+
-CFLAGS=-O2 -Z $(MODEL)
+#    Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7)
+#    should be added to the environment via "set LOCAL_ZLIB=-DFOO" or added
+#    to the declaration of LOC here:
+LOC = $(LOCAL_ZLIB)
+
+# Type for CPU required: 0: 8086, 1: 80186, 2: 80286, 3: 80386, etc.
+CPU_TYP = 0
+
+# Memory model: one of s, m, c, l (small, medium, compact, large)
+MODEL=l
+
 CC=bcc
-LD=bcc
-LIB=tlib
 #   replace bcc with tcc for Turbo C++ 1.0, with bcc32 for the 32 bit version
-LDFLAGS=$(MODEL)
+LD=$(CC)
+AR=tlib
+
+# compiler flags
+CFLAGS=-O2 -Z -m$(MODEL) $(LOC)
+#   replace "-O2" by "-O -G -a -d" for Turbo C++ 1.0
+
+LDFLAGS=-m$(MODEL)
+
 O=.obj
 
 # variables
@@ -32,69 +48,73 @@ OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
 OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
   infutil$(O)+inffast$(O)
 
+ZLIB_H = zlib.h zconf.h
+ZUTIL_H = zutil.h $(ZLIB_H)
+
+ZLIB_LIB = zlib_$(MODEL).lib
+
 all: test
 
-adler32.obj: adler32.c zutil.h zlib.h zconf.h
+# individual dependencies and action rules:
+adler32.obj: adler32.c $(ZLIB_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-compress.obj: compress.c zlib.h zconf.h
+compress.obj: compress.c $(ZLIB_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-crc32.obj: crc32.c zutil.h zlib.h zconf.h
+crc32.obj: crc32.c $(ZLIB_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+deflate.obj: deflate.c deflate.h $(ZUTIL_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-gzio.obj: gzio.c zutil.h zlib.h zconf.h
+gzio.obj: gzio.c $(ZUTIL_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h\
+infblock.obj: infblock.c $(ZUTIL_H) infblock.h inftrees.h infcodes.h infutil.h
-   infcodes.h infutil.h
 	$(CC) -c $(CFLAGS) $*.c
 
-infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h\
+infcodes.obj: infcodes.c $(ZUTIL_H) inftrees.h infutil.h infcodes.h inffast.h
-   infcodes.h inffast.h
 	$(CC) -c $(CFLAGS) $*.c
 
-inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
+inflate.obj: inflate.c $(ZUTIL_H) infblock.h
 	$(CC) -c $(CFLAGS) $*.c
 
-inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+inftrees.obj: inftrees.c $(ZUTIL_H) inftrees.h
 	$(CC) -c $(CFLAGS) $*.c
 
-infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
+infutil.obj: infutil.c $(ZUTIL_H) inftrees.h infutil.h
 	$(CC) -c $(CFLAGS) $*.c
 
-inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+inffast.obj: inffast.c $(ZUTIL_H) inftrees.h infutil.h inffast.h
 	$(CC) -c $(CFLAGS) $*.c
 
-trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
+trees.obj: trees.c deflate.h $(ZUTIL_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-uncompr.obj: uncompr.c zlib.h zconf.h
+uncompr.obj: uncompr.c $(ZLIB_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-zutil.obj: zutil.c zutil.h zlib.h zconf.h
+zutil.obj: zutil.c $(ZUTIL_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-example.obj: example.c zlib.h zconf.h
+example.obj: example.c $(ZLIB_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-minigzip.obj: minigzip.c zlib.h zconf.h
+minigzip.obj: minigzip.c $(ZLIB_H)
 	$(CC) -c $(CFLAGS) $*.c
 
 # we must cut the command line to fit in the MS/DOS 128 byte limit:
-zlib.lib: $(OBJ1) $(OBJ2)
+$(ZLIB_LIB): $(OBJ1) $(OBJ2)
-	del zlib.lib
+	del $(ZLIB_LIB)
-	$(LIB) zlib +$(OBJP1)
+	$(AR) $(ZLIB_LIB) +$(OBJP1)
-	$(LIB) zlib +$(OBJP2)
+	$(AR) $(ZLIB_LIB) +$(OBJP2)
 
-example.exe: example.obj zlib.lib
+example.exe: example.obj $(ZLIB_LIB)
-	$(LD) $(LDFLAGS) example.obj zlib.lib
+	$(LD) $(LDFLAGS) example.obj $(ZLIB_LIB)
 
-minigzip.exe: minigzip.obj zlib.lib
+minigzip.exe: minigzip.obj $(ZLIB_LIB)
-	$(LD) $(LDFLAGS) minigzip.obj zlib.lib
+	$(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB)
 
 test: example.exe minigzip.exe
 	example

msdos/Makefile.emx

@@ -0,0 +1,69 @@
+# Makefile for zlib.  Modified for emx 0.9c by Chr. Spieler, 6/17/98.
+# Copyright (C) 1995-1998 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h 
+
+# To compile, or to compile and test, type:
+# 
+#   make -fmakefile.emx;  make test -fmakefile.emx
+# 
+
+CC=gcc
+
+#CFLAGS=-MMD -O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-MMD -g -DDEBUG
+CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+             -Wstrict-prototypes -Wmissing-prototypes
+
+# If cp.exe is available, replace "copy /Y" with "cp -fp" .
+CP=copy /Y
+# If gnu install.exe is available, replace $(CP) with ginstall.
+INSTALL=$(CP)
+# The default value of RM is "rm -f."  If "rm.exe" is found, comment out:
+RM=del
+LDLIBS=-L. -lzlib
+LD=$(CC) -s -o
+LDSHARED=$(CC)
+
+INCL=zlib.h zconf.h
+LIBS=zlib.a
+
+AR=ar rcs
+
+prefix=/usr/local
+exec_prefix = $(prefix)
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example.exe minigzip.exe
+
+test: all
+	./example
+	echo hello world | .\minigzip | .\minigzip -d 
+
+%.o : %.c
+	$(CC) $(CFLAGS) -c $< -o $@
+
+zlib.a: $(OBJS)
+	$(AR) $@ $(OBJS)
+
+%.exe : %.o $(LIBS)
+	$(LD) $@ $< $(LDLIBS)
+
+
+.PHONY : clean
+
+clean:
+	$(RM) *.d
+	$(RM) *.o
+	$(RM) *.exe
+	$(RM) zlib.a
+	$(RM) foo.gz
+
+DEPS := $(wildcard *.d)
+ifneq ($(DEPS),)
+include $(DEPS)
+endif

msdos/Makefile.msc

@@ -2,20 +2,36 @@
 # Microsoft C 5.1 or later
 
 # To use, do "make makefile.msc"
-# To compile in small model, set below: MODEL=-AS
+# To compile in small model, set below: MODEL=S
 
 # If you wish to reduce the memory requirements (default 256K for big
-# objects plus a few K), you can add to CFLAGS below: 
+# objects plus a few K), you can add to the LOC macro below:
 #   -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
 # See zconf.h for details about the memory requirements.
 
 # ------------- Microsoft C 5.1 and later -------------
-MODEL=-AL
+
-CFLAGS=-Oait -Gs -nologo -W3 $(MODEL)
+#    Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7)
-#-Ox generates bad code with MSC 5.1
+#    should be added to the environment via "set LOCAL_ZLIB=-DFOO" or added
+#    to the declaration of LOC here:
+LOC = $(LOCAL_ZLIB)
+
+# Type for CPU required: 0: 8086, 1: 80186, 2: 80286, 3: 80386, etc.
+CPU_TYP = 0
+
+# Memory model: one of S, M, C, L (small, medium, compact, large)
+MODEL=L
+
 CC=cl
+CFLAGS=-nologo -A$(MODEL) -G$(CPU_TYP) -W3 -Oait -Gs $(LOC)
+#-Ox generates bad code with MSC 5.1
+LIB_CFLAGS=-Zl $(CFLAGS)
+
 LD=link
-LDFLAGS=/e/st:0x1500/noe
+LDFLAGS=/noi/e/st:0x1500/noe/farcall/packcode
+# "/farcall/packcode" are only useful for `large code' memory models
+# but should be a "no-op" for small code models.
+
 O=.obj
 
 # variables
@@ -28,69 +44,73 @@ OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
 OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
   infutil$(O)+inffast$(O)
 
-all:  zlib.lib example.exe minigzip.exe
+ZLIB_H = zlib.h zconf.h
+ZUTIL_H = zutil.h $(ZLIB_H)
 
-adler32.obj: adler32.c zutil.h zlib.h zconf.h
+ZLIB_LIB = zlib_$(MODEL).lib
+
+all:  $(ZLIB_LIB) example.exe minigzip.exe
+
+# individual dependencies and action rules:
+adler32.obj: adler32.c $(ZLIB_H)
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+compress.obj: compress.c $(ZLIB_H)
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+crc32.obj: crc32.c $(ZLIB_H)
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+deflate.obj: deflate.c deflate.h $(ZUTIL_H)
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+gzio.obj: gzio.c $(ZUTIL_H)
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+infblock.obj: infblock.c $(ZUTIL_H) infblock.h inftrees.h infcodes.h infutil.h
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+infcodes.obj: infcodes.c $(ZUTIL_H) inftrees.h infutil.h infcodes.h inffast.h
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+inflate.obj: inflate.c $(ZUTIL_H) infblock.h
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+inftrees.obj: inftrees.c $(ZUTIL_H) inftrees.h
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+infutil.obj: infutil.c $(ZUTIL_H) inftrees.h infutil.h
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+inffast.obj: inffast.c $(ZUTIL_H) inftrees.h infutil.h inffast.h
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+trees.obj: trees.c deflate.h $(ZUTIL_H)
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+uncompr.obj: uncompr.c $(ZLIB_H)
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+zutil.obj: zutil.c $(ZUTIL_H)
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+example.obj: example.c $(ZLIB_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-compress.obj: compress.c zlib.h zconf.h
+minigzip.obj: minigzip.c $(ZLIB_H)
-	$(CC) -c $(CFLAGS) $*.c
-
-crc32.obj: crc32.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-gzio.obj: gzio.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h\
-   infcodes.h infutil.h
-	$(CC) -c $(CFLAGS) $*.c
-
-infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h\
-   infcodes.h inffast.h
-	$(CC) -c $(CFLAGS) $*.c
-
-inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
-	$(CC) -c $(CFLAGS) $*.c
-
-inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
-	$(CC) -c $(CFLAGS) $*.c
-
-infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
-	$(CC) -c $(CFLAGS) $*.c
-
-inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
-	$(CC) -c $(CFLAGS) $*.c
-
-trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-uncompr.obj: uncompr.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-zutil.obj: zutil.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-example.obj: example.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
-
-minigzip.obj: minigzip.c zlib.h zconf.h
 	$(CC) -c $(CFLAGS) $*.c
 
 # we must cut the command line to fit in the MS/DOS 128 byte limit:
-zlib.lib: $(OBJ1) $(OBJ2)
+$(ZLIB_LIB): $(OBJ1) $(OBJ2)
-	if exist zlib.lib del zlib.lib
+	if exist $(ZLIB_LIB) del $(ZLIB_LIB)
-	lib zlib $(OBJ1);
+	lib $(ZLIB_LIB) $(OBJ1);
-	lib zlib $(OBJ2);
+	lib $(ZLIB_LIB) $(OBJ2);
 
-example.exe: example.obj zlib.lib
+example.exe: example.obj $(ZLIB_LIB)
-	$(LD) $(LDFLAGS) example.obj,,,zlib.lib;
+	$(LD) $(LDFLAGS) example.obj,,,$(ZLIB_LIB);
 
-minigzip.exe: minigzip.obj zlib.lib
+minigzip.exe: minigzip.obj $(ZLIB_LIB)
-	$(LD) $(LDFLAGS) minigzip.obj,,,zlib.lib;
+	$(LD) $(LDFLAGS) minigzip.obj,,,$(ZLIB_LIB);
 
 test: example.exe minigzip.exe
 	example

msdos/Makefile.tc

@@ -8,18 +8,18 @@
 # MAX_WBITS and MAX_MEM_LEVEL. For example:
 #    -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
 # If you wish to reduce the memory requirements (default 256K for big
-# objects plus a few K), you can add to CFLAGS below: 
+# objects plus a few K), you can add to CFLAGS below:
 #   -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
 # See zconf.h for details about the memory requirements.
 
 # ------------- Turbo C 2.0 -------------
-MODEL=-ml
+MODEL=l
-# CFLAGS=-O2 -G -Z $(MODEL) -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
+# CFLAGS=-O2 -G -Z -m$(MODEL) -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
-CFLAGS=-O2 -G -Z $(MODEL)
+CFLAGS=-O2 -G -Z -m$(MODEL)
 CC=tcc -I\tc\include
 LD=tcc -L\tc\lib
-LIB=tlib
+AR=tlib
-LDFLAGS=$(MODEL) -f-
+LDFLAGS=-m$(MODEL) -f-
 O=.obj
 
 # variables
@@ -32,69 +32,72 @@ OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
 OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
   infutil$(O)+inffast$(O)
 
+ZLIB_H = zlib.h zconf.h
+ZUTIL_H = zutil.h $(ZLIB_H)
+
+ZLIB_LIB = zlib_$(MODEL).lib
+
 all: test
 
-adler32.obj: adler32.c zutil.h zlib.h zconf.h
+adler32.obj: adler32.c $(ZLIB_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-compress.obj: compress.c zlib.h zconf.h
+compress.obj: compress.c $(ZLIB_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-crc32.obj: crc32.c zutil.h zlib.h zconf.h
+crc32.obj: crc32.c $(ZLIB_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+deflate.obj: deflate.c deflate.h $(ZUTIL_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-gzio.obj: gzio.c zutil.h zlib.h zconf.h
+gzio.obj: gzio.c $(ZUTIL_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h\
+infblock.obj: infblock.c $(ZUTIL_H) infblock.h inftrees.h infcodes.h infutil.h
-   infcodes.h infutil.h
 	$(CC) -c $(CFLAGS) $*.c
 
-infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h\
+infcodes.obj: infcodes.c $(ZUTIL_H) inftrees.h infutil.h infcodes.h inffast.h
-   infcodes.h inffast.h
 	$(CC) -c $(CFLAGS) $*.c
 
-inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
+inflate.obj: inflate.c $(ZUTIL_H) infblock.h
 	$(CC) -c $(CFLAGS) $*.c
 
-inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+inftrees.obj: inftrees.c $(ZUTIL_H) inftrees.h
 	$(CC) -c $(CFLAGS) $*.c
 
-infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
+infutil.obj: infutil.c $(ZUTIL_H) inftrees.h infutil.h
 	$(CC) -c $(CFLAGS) $*.c
 
-inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+inffast.obj: inffast.c $(ZUTIL_H) inftrees.h infutil.h inffast.h
 	$(CC) -c $(CFLAGS) $*.c
 
-trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
+trees.obj: trees.c deflate.h $(ZUTIL_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-uncompr.obj: uncompr.c zlib.h zconf.h
+uncompr.obj: uncompr.c $(ZLIB_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-zutil.obj: zutil.c zutil.h zlib.h zconf.h
+zutil.obj: zutil.c $(ZUTIL_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-example.obj: example.c zlib.h zconf.h
+example.obj: example.c $(ZLIB_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-minigzip.obj: minigzip.c zlib.h zconf.h
+minigzip.obj: minigzip.c $(ZLIB_H)
 	$(CC) -c $(CFLAGS) $*.c
 
 # we must cut the command line to fit in the MS/DOS 128 byte limit:
-zlib.lib: $(OBJ1) $(OBJ2)
+$(ZLIB_LIB): $(OBJ1) $(OBJ2)
-	del zlib.lib
+	del $(ZLIB_LIB)
-	$(LIB) zlib +$(OBJP1)
+	$(AR) $(ZLIB_LIB) +$(OBJP1)
-	$(LIB) zlib +$(OBJP2)
+	$(AR) $(ZLIB_LIB) +$(OBJP2)
 
-example.exe: example.obj zlib.lib
+example.exe: example.obj $(ZLIB_LIB)
-	$(LD) $(LDFLAGS) -eexample.exe example.obj zlib.lib
+	$(LD) $(LDFLAGS) -eexample.exe example.obj $(ZLIB_LIB)
 
-minigzip.exe: minigzip.obj zlib.lib
+minigzip.exe: minigzip.obj $(ZLIB_LIB)
-	$(LD) $(LDFLAGS) -eminigzip.exe minigzip.obj zlib.lib
+	$(LD) $(LDFLAGS) -eminigzip.exe minigzip.obj $(ZLIB_LIB)
 
 test: example.exe minigzip.exe
 	example

msdos/Makefile.w32

@@ -0,0 +1,97 @@
+# Makefile for zlib
+# Microsoft 32-bit Visual C++ 4.0 or later (may work on earlier versions)
+
+# To use, do "nmake /f makefile.w32"
+
+# If you wish to reduce the memory requirements (default 256K for big
+# objects plus a few K), you can add to CFLAGS below: 
+#   -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
+# See zconf.h for details about the memory requirements.
+
+# ------------- Microsoft Visual C++ 4.0 and later -------------
+MODEL=
+CFLAGS=-Ox -GA3s -nologo -W3
+CC=cl
+LD=link
+LDFLAGS=
+O=.obj
+
+# variables
+OBJ1 = adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) \
+  trees$(O)
+OBJP1 = adler32$(O)+compress$(O)+crc32$(O)+gzio$(O)+uncompr$(O)+deflate$(O)+\
+  trees$(O)
+OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
+  infutil$(O) inffast$(O)
+OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
+  infutil$(O)+inffast$(O)
+
+all:  zlib.lib example.exe minigzip.exe
+
+adler32.obj: adler32.c zlib.h zconf.h
+  $(CC) -c $(CFLAGS) $*.c
+
+compress.obj: compress.c zlib.h zconf.h
+  $(CC) -c $(CFLAGS) $*.c
+
+crc32.obj: crc32.c zlib.h zconf.h
+  $(CC) -c $(CFLAGS) $*.c
+
+deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+  $(CC) -c $(CFLAGS) $*.c
+
+gzio.obj: gzio.c zutil.h zlib.h zconf.h
+  $(CC) -c $(CFLAGS) $*.c
+
+infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h\
+   infcodes.h infutil.h
+  $(CC) -c $(CFLAGS) $*.c
+
+infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h\
+   infcodes.h inffast.h
+  $(CC) -c $(CFLAGS) $*.c
+
+inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
+  $(CC) -c $(CFLAGS) $*.c
+
+inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+  $(CC) -c $(CFLAGS) $*.c
+
+infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
+  $(CC) -c $(CFLAGS) $*.c
+
+inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+  $(CC) -c $(CFLAGS) $*.c
+
+trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
+  $(CC) -c $(CFLAGS) $*.c
+
+uncompr.obj: uncompr.c zlib.h zconf.h
+  $(CC) -c $(CFLAGS) $*.c
+
+zutil.obj: zutil.c zutil.h zlib.h zconf.h
+  $(CC) -c $(CFLAGS) $*.c
+
+example.obj: example.c zlib.h zconf.h
+  $(CC) -c $(CFLAGS) $*.c
+
+minigzip.obj: minigzip.c zlib.h zconf.h
+  $(CC) -c $(CFLAGS) $*.c
+
+zlib.lib: $(OBJ1) $(OBJ2)
+  if exist zlib.lib del zlib.lib
+  lib /OUT:zlib.lib $(OBJ1) $(OBJ2)
+
+example.exe: example.obj zlib.lib
+  $(LD) $(LDFLAGS) example.obj zlib.lib /OUT:example.exe /SUBSYSTEM:CONSOLE
+
+minigzip.exe: minigzip.obj zlib.lib
+  $(LD) $(LDFLAGS) minigzip.obj zlib.lib /OUT:minigzip.exe /SUBSYSTEM:CONSOLE
+
+test: example.exe minigzip.exe
+  example
+  echo hello world | minigzip | minigzip -d 
+
+#clean:
+#  del *.obj
+#  del *.exe

msdos/Makefile.wat

@@ -30,13 +30,13 @@ OBJP3=infutil$(O)+inffast$(O)
 
 all: test
 
-adler32.obj: adler32.c zutil.h zlib.h zconf.h
+adler32.obj: adler32.c zlib.h zconf.h
 	$(CC) $(CFLAGS) $*.c
 
 compress.obj: compress.c zlib.h zconf.h
 	$(CC) $(CFLAGS) $*.c
 
-crc32.obj: crc32.c zutil.h zlib.h zconf.h
+crc32.obj: crc32.c zlib.h zconf.h
 	$(CC) $(CFLAGS) $*.c
 
 deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h

msdos/zlib.def

@@ -8,7 +8,7 @@ SUBSYSTEM	WINDOWS
 
 STUB		'WINSTUB.EXE'
 
-VERSION		1.09
+VERSION		1.13
 
 CODE		 EXECUTE READ
 

msdos/zlib.rc

@@ -2,8 +2,8 @@
 
 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1,0,9,0
+  FILEVERSION	 1,1,3,0
-  PRODUCTVERSION 1,0,9,0
+  PRODUCTVERSION 1,1,3,0
   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
   FILEFLAGS	0
   FILEOS	VOS_DOS_WINDOWS32
@@ -17,7 +17,7 @@ BEGIN
 
     BEGIN
       VALUE "FileDescription", "zlib data compression library\0"
-      VALUE "FileVersion",	"1.0.9\0"
+      VALUE "FileVersion",	"1.1.3\0"
       VALUE "InternalName",	"zlib\0"
       VALUE "OriginalFilename",	"zlib.dll\0"
       VALUE "ProductName",	"ZLib.DLL\0"

nt/Makefile.emx

@@ -0,0 +1,138 @@
+# Makefile for zlib.  Modified for emx/rsxnt by Chr. Spieler, 6/16/98.
+# Copyright (C) 1995-1998 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h 
+
+# To compile, or to compile and test, type:
+# 
+#   make -fmakefile.emx;  make test -fmakefile.emx
+# 
+
+CC=gcc -Zwin32
+
+#CFLAGS=-MMD -O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-MMD -g -DDEBUG
+CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+             -Wstrict-prototypes -Wmissing-prototypes
+
+# If cp.exe is available, replace "copy /Y" with "cp -fp" .
+CP=copy /Y
+# If gnu install.exe is available, replace $(CP) with ginstall.
+INSTALL=$(CP)
+# The default value of RM is "rm -f."  If "rm.exe" is found, comment out:
+RM=del
+LDLIBS=-L. -lzlib
+LD=$(CC) -s -o
+LDSHARED=$(CC)
+
+INCL=zlib.h zconf.h
+LIBS=zlib.a
+
+AR=ar rcs
+
+prefix=/usr/local
+exec_prefix = $(prefix)
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example.exe minigzip.exe
+
+test: all
+	./example
+	echo hello world | .\minigzip | .\minigzip -d 
+
+%.o : %.c
+	$(CC) $(CFLAGS) -c $< -o $@
+
+zlib.a: $(OBJS)
+	$(AR) $@ $(OBJS)
+
+%.exe : %.o $(LIBS)
+	$(LD) $@ $< $(LDLIBS)
+
+
+.PHONY : clean
+
+clean:
+	$(RM) *.d
+	$(RM) *.o
+	$(RM) *.exe
+	$(RM) zlib.a
+	$(RM) foo.gz
+
+DEPS := $(wildcard *.d)
+ifneq ($(DEPS),)
+include $(DEPS)
+endif
+# Makefile for zlib.  Modified for emx 0.9c by Chr. Spieler, 6/17/98.
+# Copyright (C) 1995-1998 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h 
+
+# To compile, or to compile and test, type:
+# 
+#   make -fmakefile.emx;  make test -fmakefile.emx
+# 
+
+CC=gcc
+
+#CFLAGS=-MMD -O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-MMD -g -DDEBUG
+CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+             -Wstrict-prototypes -Wmissing-prototypes
+
+# If cp.exe is available, replace "copy /Y" with "cp -fp" .
+CP=copy /Y
+# If gnu install.exe is available, replace $(CP) with ginstall.
+INSTALL=$(CP)
+# The default value of RM is "rm -f."  If "rm.exe" is found, comment out:
+RM=del
+LDLIBS=-L. -lzlib
+LD=$(CC) -s -o
+LDSHARED=$(CC)
+
+INCL=zlib.h zconf.h
+LIBS=zlib.a
+
+AR=ar rcs
+
+prefix=/usr/local
+exec_prefix = $(prefix)
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example.exe minigzip.exe
+
+test: all
+	./example
+	echo hello world | .\minigzip | .\minigzip -d 
+
+%.o : %.c
+	$(CC) $(CFLAGS) -c $< -o $@
+
+zlib.a: $(OBJS)
+	$(AR) $@ $(OBJS)
+
+%.exe : %.o $(LIBS)
+	$(LD) $@ $< $(LDLIBS)
+
+
+.PHONY : clean
+
+clean:
+	$(RM) *.d
+	$(RM) *.o
+	$(RM) *.exe
+	$(RM) zlib.a
+	$(RM) foo.gz
+
+DEPS := $(wildcard *.d)
+ifneq ($(DEPS),)
+include $(DEPS)
+endif

nt/Makefile.gcc

@@ -0,0 +1,87 @@
+# Makefile for zlib.  Modified for mingw32 by C. Spieler, 6/16/98.
+# (This Makefile is directly derived from Makefile.dj2)
+# Copyright (C) 1995-1998 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h 
+
+# To compile, or to compile and test, type:
+# 
+#   make -fmakefile.gcc;  make test -fmakefile.gcc
+# 
+# To install libz.a, zconf.h and zlib.h in the mingw32 directories, type:
+# 
+#    make install -fmakefile.gcc
+# 
+
+CC=gcc
+
+#CFLAGS=-MMD -O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-MMD -g -DDEBUG
+CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+             -Wstrict-prototypes -Wmissing-prototypes
+
+# If cp.exe is available, replace "copy /Y" with "cp -fp" .
+CP=copy /Y
+# If gnu install.exe is available, replace $(CP) with ginstall.
+INSTALL=$(CP)
+# The default value of RM is "rm -f."  If "rm.exe" is found, comment out:
+RM=del
+LDLIBS=-L. -lz
+LD=$(CC) -s -o
+LDSHARED=$(CC)
+
+INCL=zlib.h zconf.h
+LIBS=libz.a
+
+AR=ar rcs
+
+prefix=/usr/local
+exec_prefix = $(prefix)
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example.exe minigzip.exe
+
+test: all
+	./example
+	echo hello world | .\minigzip | .\minigzip -d 
+
+%.o : %.c
+	$(CC) $(CFLAGS) -c $< -o $@
+
+libz.a: $(OBJS)
+	$(AR) $@ $(OBJS)
+
+%.exe : %.o $(LIBS)
+	$(LD) $@ $< $(LDLIBS)
+
+# INCLUDE_PATH and LIBRARY_PATH were set for [make] in djgpp.env .
+
+.PHONY : uninstall clean
+
+install: $(INCL) $(LIBS)
+	-@if not exist $(INCLUDE_PATH)\nul mkdir $(INCLUDE_PATH)
+	-@if not exist $(LIBRARY_PATH)\nul mkdir $(LIBRARY_PATH)
+	$(INSTALL) zlib.h $(INCLUDE_PATH)
+	$(INSTALL) zconf.h $(INCLUDE_PATH)
+	$(INSTALL) libz.a $(LIBRARY_PATH)
+
+uninstall:
+	$(RM) $(INCLUDE_PATH)\zlib.h
+	$(RM) $(INCLUDE_PATH)\zconf.h
+	$(RM) $(LIBRARY_PATH)\libz.a
+
+clean:
+	$(RM) *.d
+	$(RM) *.o
+	$(RM) *.exe
+	$(RM) libz.a
+	$(RM) foo.gz
+
+DEPS := $(wildcard *.d)
+ifneq ($(DEPS),)
+include $(DEPS)
+endif

os2/Makefile.os2

@@ -0,0 +1,136 @@
+# Makefile for zlib under OS/2 using GCC (PGCC)
+# For conditions of distribution and use, see copyright notice in zlib.h 
+
+# To compile and test, type:
+#   cp Makefile.os2 ..
+#   cd ..
+#   make -f Makefile.os2 test
+
+# This makefile will build a static library z.lib, a shared library
+# z.dll and a import library zdll.lib. You can use either z.lib or
+# zdll.lib by specifying either -lz or -lzdll on gcc's command line
+
+CC=gcc -Zomf -s
+
+CFLAGS=-O6 -Wall
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-g -DDEBUG
+#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+#           -Wstrict-prototypes -Wmissing-prototypes
+
+#################### BUG WARNING: #####################
+## infcodes.c hits a bug in pgcc-1.0, so you have to use either
+## -O# where # <= 4 or one of (-fno-ommit-frame-pointer or -fno-force-mem)
+## This bug is reportedly fixed in pgcc >1.0, but this was not tested
+CFLAGS+=-fno-force-mem
+
+LDFLAGS=-s -L. -lzdll -Zcrtdll
+LDSHARED=$(CC) -s -Zomf -Zdll -Zcrtdll
+
+VER=1.1.0
+ZLIB=z.lib
+SHAREDLIB=z.dll
+SHAREDLIBIMP=zdll.lib
+LIBS=$(ZLIB) $(SHAREDLIB) $(SHAREDLIBIMP)
+
+AR=emxomfar cr
+IMPLIB=emximp
+RANLIB=echo
+TAR=tar
+SHELL=bash
+
+prefix=/usr/local
+exec_prefix = $(prefix)
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+DISTFILES = README INDEX ChangeLog configure Make*[a-z0-9] *.[ch] descrip.mms \
+  algorithm.txt zlib.3 msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \
+  nt/Makefile.nt nt/zlib.dnt  contrib/README.contrib contrib/*.txt \
+  contrib/asm386/*.asm contrib/asm386/*.c \
+  contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/iostream/*.cpp \
+  contrib/iostream/*.h  contrib/iostream2/*.h contrib/iostream2/*.cpp \
+  contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32
+
+all: example.exe minigzip.exe
+
+test: all
+	@LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
+	echo hello world | ./minigzip | ./minigzip -d || \
+	  echo '		*** minigzip test FAILED ***' ; \
+	if ./example; then \
+	  echo '		*** zlib test OK ***'; \
+	else \
+	  echo '		*** zlib test FAILED ***'; \
+	fi
+
+$(ZLIB): $(OBJS)
+	$(AR) $@ $(OBJS)
+	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
+
+$(SHAREDLIB): $(OBJS) os2/z.def
+	$(LDSHARED) -o $@ $^
+
+$(SHAREDLIBIMP): os2/z.def
+	$(IMPLIB) -o $@ $^
+
+example.exe: example.o $(LIBS)
+	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
+
+minigzip.exe: minigzip.o $(LIBS)
+	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
+
+clean:
+	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz
+
+distclean:	clean
+
+zip:
+	mv Makefile Makefile~; cp -p Makefile.in Makefile
+	rm -f test.c ztest*.c
+	v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
+	zip -ul9 zlib$$v $(DISTFILES)
+	mv Makefile~ Makefile
+
+dist:
+	mv Makefile Makefile~; cp -p Makefile.in Makefile
+	rm -f test.c ztest*.c
+	d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
+	rm -f $$d.tar.gz; \
+	if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \
+	files=""; \
+	for f in $(DISTFILES); do files="$$files $$d/$$f"; done; \
+	cd ..; \
+	GZIP=-9 $(TAR) chofz $$d/$$d.tar.gz $$files; \
+	if test ! -d $$d; then rm -f $$d; fi
+	mv Makefile~ Makefile
+
+tags:	
+	etags *.[ch]
+
+depend:
+	makedepend -- $(CFLAGS) -- *.[ch]
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzio.o: zutil.h zlib.h zconf.h
+infblock.o: infblock.h inftrees.h infcodes.h infutil.h zutil.h zlib.h zconf.h
+infcodes.o: zutil.h zlib.h zconf.h
+infcodes.o: inftrees.h infblock.h infcodes.h infutil.h inffast.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h
+inffast.o: infblock.h infcodes.h infutil.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h infblock.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
+minigzip.o:  zlib.h zconf.h 
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h  

os2/zlib.def

@@ -0,0 +1,51 @@
+;
+; Slightly modified version of ../nt/zlib.dnt :-)
+;
+
+LIBRARY		Z
+DESCRIPTION	"Zlib compression library for OS/2"
+CODE		PRELOAD MOVEABLE DISCARDABLE
+DATA		PRELOAD MOVEABLE MULTIPLE
+
+EXPORTS
+    adler32
+    compress
+    crc32
+    deflate
+    deflateCopy
+    deflateEnd
+    deflateInit2_
+    deflateInit_
+    deflateParams
+    deflateReset
+    deflateSetDictionary
+    gzclose
+    gzdopen
+    gzerror
+    gzflush
+    gzopen
+    gzread
+    gzwrite
+    inflate
+    inflateEnd
+    inflateInit2_
+    inflateInit_
+    inflateReset
+    inflateSetDictionary
+    inflateSync
+    uncompress
+    zlibVersion
+    gzprintf
+    gzputc
+    gzgetc
+    gzseek
+    gzrewind
+    gztell
+    gzeof
+    gzsetparams
+    zError
+    inflateSyncPoint
+    get_crc_table
+    compress2
+    gzputs
+    gzgets

trees.c

@@ -99,13 +99,13 @@ local ct_data static_dtree[D_CODES];
  * 5 bits.)
  */
 
-local uch dist_code[DIST_CODE_LEN];
+uch _dist_code[DIST_CODE_LEN];
 /* Distance codes. The first 256 values correspond to the distances
  * 3 .. 258, the last 256 values correspond to the top 8 bits of
  * the 15 bit distances.
  */
 
-local uch length_code[MAX_MATCH-MIN_MATCH+1];
+uch _length_code[MAX_MATCH-MIN_MATCH+1];
 /* length code for each normalized match length (0 == MIN_MATCH) */
 
 local int base_length[LENGTH_CODES];
@@ -173,13 +173,6 @@ local void gen_trees_header OF((void));
        send_bits(s, tree[c].Code, tree[c].Len); }
 #endif
 
-#define d_code(dist) \
-   ((dist) < 256 ? dist_code[dist] : dist_code[256+((dist)>>7)])
-/* Mapping from a distance to a distance code. dist is the distance - 1 and
- * must not have side effects. dist_code[256] and dist_code[257] are never
- * used.
- */
-
 /* ===========================================================================
  * Output a short LSB first on the stream.
  * IN assertion: there is enough room in pendingBuf.
@@ -257,12 +250,19 @@ local void tr_static_init()
 
     if (static_init_done) return;
 
+    /* For some embedded targets, global variables are not initialized: */
+    static_l_desc.static_tree = static_ltree;
+    static_l_desc.extra_bits = extra_lbits;
+    static_d_desc.static_tree = static_dtree;
+    static_d_desc.extra_bits = extra_dbits;
+    static_bl_desc.extra_bits = extra_blbits;
+
     /* Initialize the mapping length (0..255) -> length code (0..28) */
     length = 0;
     for (code = 0; code < LENGTH_CODES-1; code++) {
         base_length[code] = length;
         for (n = 0; n < (1<<extra_lbits[code]); n++) {
-            length_code[length++] = (uch)code;
+            _length_code[length++] = (uch)code;
         }
     }
     Assert (length == 256, "tr_static_init: length != 256");
@@ -270,14 +270,14 @@ local void tr_static_init()
      * in two different ways: code 284 + 5 bits or code 285, so we
      * overwrite length_code[255] to use the best encoding:
      */
-    length_code[length-1] = (uch)code;
+    _length_code[length-1] = (uch)code;
 
     /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
     dist = 0;
     for (code = 0 ; code < 16; code++) {
         base_dist[code] = dist;
         for (n = 0; n < (1<<extra_dbits[code]); n++) {
-            dist_code[dist++] = (uch)code;
+            _dist_code[dist++] = (uch)code;
         }
     }
     Assert (dist == 256, "tr_static_init: dist != 256");
@@ -285,7 +285,7 @@ local void tr_static_init()
     for ( ; code < D_CODES; code++) {
         base_dist[code] = dist << 7;
         for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
-            dist_code[256 + dist++] = (uch)code;
+            _dist_code[256 + dist++] = (uch)code;
         }
     }
     Assert (dist == 256, "tr_static_init: 256+dist != 512");
@@ -349,15 +349,15 @@ void gen_trees_header()
 		static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5));
     }
 
-    fprintf(header, "local const uch dist_code[DIST_CODE_LEN] = {\n");
+    fprintf(header, "const uch _dist_code[DIST_CODE_LEN] = {\n");
     for (i = 0; i < DIST_CODE_LEN; i++) {
-	fprintf(header, "%2u%s", dist_code[i],
+	fprintf(header, "%2u%s", _dist_code[i],
 		SEPARATOR(i, DIST_CODE_LEN-1, 20));
     }
 
-    fprintf(header, "local const uch length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
+    fprintf(header, "const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
     for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) {
-	fprintf(header, "%2u%s", length_code[i],
+	fprintf(header, "%2u%s", _length_code[i],
 		SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20));
     }
 
@@ -385,8 +385,6 @@ void _tr_init(s)
 {
     tr_static_init();
 
-    s->compressed_len = 0L;
-
     s->l_desc.dyn_tree = s->dyn_ltree;
     s->l_desc.stat_desc = &static_l_desc;
 
@@ -400,6 +398,7 @@ void _tr_init(s)
     s->bi_valid = 0;
     s->last_eob_len = 8; /* enough lookahead for inflate */
 #ifdef DEBUG
+    s->compressed_len = 0L;
     s->bits_sent = 0L;
 #endif
 
@@ -872,9 +871,10 @@ void _tr_stored_block(s, buf, stored_len, eof)
     int eof;          /* true if this is the last block for a file */
 {
     send_bits(s, (STORED_BLOCK<<1)+eof, 3);  /* send block type */
+#ifdef DEBUG
     s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L;
     s->compressed_len += (stored_len + 4) << 3;
-
+#endif
     copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
 }
 
@@ -894,7 +894,9 @@ void _tr_align(s)
 {
     send_bits(s, STATIC_TREES<<1, 3);
     send_code(s, END_BLOCK, static_ltree);
+#ifdef DEBUG
     s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
+#endif
     bi_flush(s);
     /* Of the 10 bits for the empty block, we have already sent
      * (10 - bi_valid) bits. The lookahead for the last real code (before
@@ -904,7 +906,9 @@ void _tr_align(s)
     if (1 + s->last_eob_len + 10 - s->bi_valid < 9) {
         send_bits(s, STATIC_TREES<<1, 3);
         send_code(s, END_BLOCK, static_ltree);
+#ifdef DEBUG
         s->compressed_len += 10L;
+#endif
         bi_flush(s);
     }
     s->last_eob_len = 7;
@@ -912,10 +916,9 @@ void _tr_align(s)
 
 /* ===========================================================================
  * Determine the best encoding for the current block: dynamic trees, static
- * trees or store, and output the encoded block to the zip file. This function
+ * trees or store, and output the encoded block to the zip file.
- * returns the total compressed length for the file so far.
  */
-ulg _tr_flush_block(s, buf, stored_len, eof)
+void _tr_flush_block(s, buf, stored_len, eof)
     deflate_state *s;
     charf *buf;       /* input block, or NULL if too old */
     ulg stored_len;   /* length of input block */
@@ -962,25 +965,6 @@ ulg _tr_flush_block(s, buf, stored_len, eof)
 	opt_lenb = static_lenb = stored_len + 5; /* force a stored block */
     }
 
-    /* If compression failed and this is the first and last block,
-     * and if the .zip file can be seeked (to rewrite the local header),
-     * the whole file is transformed into a stored file:
-     */
-#ifdef STORED_FILE_OK
-#  ifdef FORCE_STORED_FILE
-    if (eof && s->compressed_len == 0L) { /* force stored file */
-#  else
-    if (stored_len <= opt_lenb && eof && s->compressed_len==0L && seekable()) {
-#  endif
-        /* Since LIT_BUFSIZE <= 2*WSIZE, the input data must be there: */
-        if (buf == (charf*)0) error ("block vanished");
-
-        copy_block(buf, (unsigned)stored_len, 0); /* without header */
-        s->compressed_len = stored_len << 3;
-        s->method = STORED;
-    } else
-#endif /* STORED_FILE_OK */
-
 #ifdef FORCE_STORED
     if (buf != (char*)0) { /* force stored block */
 #else
@@ -1002,25 +986,32 @@ ulg _tr_flush_block(s, buf, stored_len, eof)
 #endif
         send_bits(s, (STATIC_TREES<<1)+eof, 3);
         compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree);
+#ifdef DEBUG
         s->compressed_len += 3 + s->static_len;
+#endif
     } else {
         send_bits(s, (DYN_TREES<<1)+eof, 3);
         send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1,
                        max_blindex+1);
         compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree);
+#ifdef DEBUG
         s->compressed_len += 3 + s->opt_len;
+#endif
     }
     Assert (s->compressed_len == s->bits_sent, "bad compressed size");
+    /* The above check is made mod 2^32, for files larger than 512 MB
+     * and uLong implemented on 32 bits.
+     */
     init_block(s);
 
     if (eof) {
         bi_windup(s);
+#ifdef DEBUG
         s->compressed_len += 7;  /* align on byte boundary */
+#endif
     }
     Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3,
            s->compressed_len-7*eof));
-
-    return s->compressed_len >> 3;
 }
 
 /* ===========================================================================
@@ -1045,12 +1036,13 @@ int _tr_tally (s, dist, lc)
                (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
                (ush)d_code(dist) < (ush)D_CODES,  "_tr_tally: bad match");
 
-        s->dyn_ltree[length_code[lc]+LITERALS+1].Freq++;
+        s->dyn_ltree[_length_code[lc]+LITERALS+1].Freq++;
         s->dyn_dtree[d_code(dist)].Freq++;
     }
 
+#ifdef TRUNCATE_BLOCK
     /* Try to guess if it is profitable to stop the current block here */
-    if (s->level > 2 && (s->last_lit & 0xfff) == 0) {
+    if ((s->last_lit & 0x1fff) == 0 && s->level > 2) {
         /* Compute an upper bound for the compressed length */
         ulg out_length = (ulg)s->last_lit*8L;
         ulg in_length = (ulg)((long)s->strstart - s->block_start);
@@ -1065,6 +1057,7 @@ int _tr_tally (s, dist, lc)
                100L - out_length*100L/in_length));
         if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1;
     }
+#endif
     return (s->last_lit == s->lit_bufsize-1);
     /* We avoid equality with lit_bufsize because of wraparound at 64K
      * on 16 bit machines and because stored blocks are restricted to
@@ -1094,7 +1087,7 @@ local void compress_block(s, ltree, dtree)
             Tracecv(isgraph(lc), (stderr," '%c' ", lc));
         } else {
             /* Here, lc is the match length - MIN_MATCH */
-            code = length_code[lc];
+            code = _length_code[lc];
             send_code(s, code+LITERALS+1, ltree); /* send the length code */
             extra = extra_lbits[code];
             if (extra != 0) {

trees.h

@@ -70,7 +70,7 @@ local const ct_data static_dtree[D_CODES] = {
 {{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}}
 };
 
-local const uch dist_code[DIST_CODE_LEN] = {
+const uch _dist_code[DIST_CODE_LEN] = {
  0,  1,  2,  3,  4,  4,  5,  5,  6,  6,  6,  6,  7,  7,  7,  7,  8,  8,  8,  8,
  8,  8,  8,  8,  9,  9,  9,  9,  9,  9,  9,  9, 10, 10, 10, 10, 10, 10, 10, 10,
 10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
@@ -99,7 +99,7 @@ local const uch dist_code[DIST_CODE_LEN] = {
 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29
 };
 
-local const uch length_code[MAX_MATCH-MIN_MATCH+1]= {
+const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {
  0,  1,  2,  3,  4,  5,  6,  7,  8,  8,  9,  9, 10, 10, 11, 11, 12, 12, 12, 12,
 13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16,
 17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19,

zconf.h

@@ -91,8 +91,8 @@
 #  define NO_DUMMY_DECL
 #endif
 
-/* Borland C incorrectly complains about missing returns: */
+/* Old Borland C incorrectly complains about missing returns: */
-#if defined(__BORLANDC__)
+#if defined(__BORLANDC__) && (__BORLANDC__ < 0x500)
 #  define NEED_DUMMY_RETURN
 #endif
 
@@ -148,7 +148,7 @@
    /* MSC small or medium model */
 #  define SMALL_MEDIUM
 #  ifdef _MSC_VER
-#    define FAR __far
+#    define FAR _far
 #  else
 #    define FAR far
 #  endif
@@ -156,42 +156,68 @@
 #if defined(__BORLANDC__) && (defined(__SMALL__) || defined(__MEDIUM__))
 #  ifndef __32BIT__
 #    define SMALL_MEDIUM
-#    define FAR __far
+#    define FAR _far
 #  endif
 #endif
 
 /* Compile with -DZLIB_DLL for Windows DLL support */
-#if (defined(_WINDOWS) || defined(WINDOWS)) && defined(ZLIB_DLL)
+#if defined(ZLIB_DLL)
-#  ifdef FAR
+#  if defined(_WINDOWS) || defined(WINDOWS)
-#    undef FAR
+#    ifdef FAR
+#      undef FAR
+#    endif
+#    include <windows.h>
+#    define ZEXPORT  WINAPI
+#    ifdef WIN32
+#      define ZEXPORTVA  WINAPIV
+#    else
+#      define ZEXPORTVA  FAR _cdecl _export
+#    endif
 #  endif
-#  include <windows.h>
+#  if defined (__BORLANDC__)
-#  define ZEXPORT  WINAPI
+#    if (__BORLANDC__ >= 0x0500) && defined (WIN32)
-#  ifdef WIN32
+#      include <windows.h>
-#    define ZEXPORTVA  WINAPIV
+#      define ZEXPORT __declspec(dllexport) WINAPI
+#      define ZEXPORTRVA __declspec(dllexport) WINAPIV
+#    else
+#      if defined (_Windows) && defined (__DLL__)
+#        define ZEXPORT _export
+#        define ZEXPORTVA _export
+#      endif
+#    endif
+#  endif
+#endif
+
+#if defined (__BEOS__)
+#  if defined (ZLIB_DLL)
+#    define ZEXTERN extern __declspec(dllexport)
 #  else
-#    define ZEXPORTVA  FAR _cdecl _export
+#    define ZEXTERN extern __declspec(dllimport)
 #  endif
-#else
+#endif
-#   if defined (__BORLANDC__) && defined (_Windows) && defined (__DLL__)
+
-#       define ZEXPORT _export
+#ifndef ZEXPORT
-#       define ZEXPORTVA _export
+#  define ZEXPORT
-#   else
+#endif
-#       define ZEXPORT
+#ifndef ZEXPORTVA
-#       define ZEXPORTVA
+#  define ZEXPORTVA
-#   endif
+#endif
+#ifndef ZEXTERN
+#  define ZEXTERN extern
 #endif
 
 #ifndef FAR
 #   define FAR
 #endif
 
+#if !defined(MACOS) && !defined(TARGET_OS_MAC)
 typedef unsigned char  Byte;  /* 8 bits */
+#endif
 typedef unsigned int   uInt;  /* 16 bits or more */
 typedef unsigned long  uLong; /* 32 bits or more */
 
-#if defined(__BORLANDC__) && defined(SMALL_MEDIUM)
+#ifdef SMALL_MEDIUM
-   /* Borland C/C++ ignores FAR inside typedef */
+   /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
 #  define Bytef Byte FAR
 #else
    typedef Byte  FAR Bytef;
@@ -217,6 +243,7 @@ typedef uLong FAR uLongf;
 #ifndef SEEK_SET
 #  define SEEK_SET        0       /* Seek from beginning of file.  */
 #  define SEEK_CUR        1       /* Seek from current position.  */
+#  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
 #endif
 #ifndef z_off_t
 #  define  z_off_t long

zlib.3

@@ -1,4 +1,4 @@
-.TH ZLIB 3 "16 February 1998"
+.TH ZLIB 3 "9 July 1998"
 .SH NAME
 zlib \- compression/decompression library
 .SH SYNOPSIS
@@ -81,7 +81,7 @@ These documents are also available in other formats from:
 .IP
 ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
 .SH AUTHORS
-Version 1.0.9.
+Version 1.1.3
 Copyright (C) 1995-1998 Jean-loup Gailly (jloup@gzip.org)
 and Mark Adler (madler@alumni.caltech.edu).
 .LP
@@ -96,7 +96,7 @@ The deflate format used by
 was defined by Phil Katz.
 The deflate and
 .I zlib
-specifications were written by Peter Deutsch.
+specifications were written by L. Peter Deutsch.
 Thanks to all the people who reported problems and suggested various
 improvements in
 .IR zlib ;

zlib.h

@@ -1,5 +1,5 @@
 /* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.0.9, Feb 16th, 1998
+  version 1.1.3, July 9th, 1998
 
   Copyright (C) 1995-1998 Jean-loup Gailly and Mark Adler
 
@@ -31,13 +31,13 @@
 #ifndef _ZLIB_H
 #define _ZLIB_H
 
+#include "zconf.h"
+
 #ifdef __cplusplus
 extern "C" {
 #endif
 
-#include "zconf.h"
+#define ZLIB_VERSION "1.1.3"
-
-#define ZLIB_VERSION "1.0.9"
 
 /* 
      The 'zlib' compression library provides in-memory compression and
@@ -168,7 +168,7 @@ typedef z_stream FAR *z_streamp;
 
                         /* basic functions */
 
-extern const char * ZEXPORT zlibVersion OF((void));
+ZEXTERN const char * ZEXPORT zlibVersion OF((void));
 /* The application can compare zlibVersion and ZLIB_VERSION for consistency.
    If the first character differs, the library code actually used is
    not compatible with the zlib.h header file used by the application.
@@ -176,7 +176,7 @@ extern const char * ZEXPORT zlibVersion OF((void));
  */
 
 /* 
-extern int ZEXPORT deflateInit OF((z_streamp strm, int level));
+ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
 
      Initializes the internal stream state for compression. The fields
    zalloc, zfree and opaque must be initialized before by the caller.
@@ -198,7 +198,7 @@ extern int ZEXPORT deflateInit OF((z_streamp strm, int level));
 */
 
 
-extern int ZEXPORT deflate OF((z_streamp strm, int flush));
+ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
 /*
     deflate compresses as much data as possible, and stops when the input
   buffer becomes empty or the output buffer becomes full. It may introduce some
@@ -271,11 +271,12 @@ extern int ZEXPORT deflate OF((z_streamp strm, int flush));
   processed or more output produced), Z_STREAM_END if all input has been
   consumed and all output has been produced (only when flush is set to
   Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
-  if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible.
+  if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible
+  (for example avail_in or avail_out was zero).
 */
 
 
-extern int ZEXPORT deflateEnd OF((z_streamp strm));
+ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
 /*
      All dynamically allocated data structures for this stream are freed.
    This function discards any unprocessed input and does not flush any
@@ -290,7 +291,7 @@ extern int ZEXPORT deflateEnd OF((z_streamp strm));
 
 
 /* 
-extern int ZEXPORT inflateInit OF((z_streamp strm));
+ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
 
      Initializes the internal stream state for decompression. The fields
    next_in, avail_in, zalloc, zfree and opaque must be initialized before by
@@ -310,7 +311,7 @@ extern int ZEXPORT inflateInit OF((z_streamp strm));
 */
 
 
-extern int ZEXPORT inflate OF((z_streamp strm, int flush));
+ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
 /*
     inflate decompresses as much data as possible, and stops when the input
   buffer becomes empty or the output buffer becomes full. It may some
@@ -379,7 +380,7 @@ extern int ZEXPORT inflate OF((z_streamp strm, int flush));
 */
 
 
-extern int ZEXPORT inflateEnd OF((z_streamp strm));
+ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
 /*
      All dynamically allocated data structures for this stream are freed.
    This function discards any unprocessed input and does not flush any
@@ -397,12 +398,12 @@ extern int ZEXPORT inflateEnd OF((z_streamp strm));
 */
 
 /*   
-extern int ZEXPORT deflateInit2 OF((z_streamp strm,
+ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
-                                    int  level,
+                                     int  level,
-                                    int  method,
+                                     int  method,
-                                    int  windowBits,
+                                     int  windowBits,
-                                    int  memLevel,
+                                     int  memLevel,
-                                    int  strategy));
+                                     int  strategy));
 
      This is another version of deflateInit with more compression options. The
    fields next_in, zalloc, zfree and opaque must be initialized before by
@@ -440,14 +441,14 @@ extern int ZEXPORT deflateInit2 OF((z_streamp strm,
    not perform any compression: this will be done by deflate().
 */
                             
-extern int ZEXPORT deflateSetDictionary OF((z_streamp strm,
+ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
-                                            const Bytef *dictionary,
+                                             const Bytef *dictionary,
-                                            uInt  dictLength));
+                                             uInt  dictLength));
 /*
      Initializes the compression dictionary from the given byte sequence
    without producing any compressed output. This function must be called
-   immediately after deflateInit or deflateInit2, before any call of
+   immediately after deflateInit, deflateInit2 or deflateReset, before any
-   deflate. The compressor and decompressor must use exactly the same
+   call of deflate. The compressor and decompressor must use exactly the same
    dictionary (see inflateSetDictionary).
 
      The dictionary should consist of strings (byte sequences) that are likely
@@ -476,8 +477,8 @@ extern int ZEXPORT deflateSetDictionary OF((z_streamp strm,
    perform any compression: this will be done by deflate().
 */
 
-extern int ZEXPORT deflateCopy OF((z_streamp dest,
+ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
-                                   z_streamp source));
+                                    z_streamp source));
 /*
      Sets the destination stream as a complete copy of the source stream.
 
@@ -494,7 +495,7 @@ extern int ZEXPORT deflateCopy OF((z_streamp dest,
    destination.
 */
 
-extern int ZEXPORT deflateReset OF((z_streamp strm));
+ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
 /*
      This function is equivalent to deflateEnd followed by deflateInit,
    but does not free and reallocate all the internal compression state.
@@ -505,7 +506,9 @@ extern int ZEXPORT deflateReset OF((z_streamp strm));
    stream state was inconsistent (such as zalloc or state being NULL).
 */
 
-extern int ZEXPORT deflateParams OF((z_streamp strm, int level, int strategy));
+ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
+				      int level,
+				      int strategy));
 /*
      Dynamically update the compression level and compression strategy.  The
    interpretation of level and strategy is as in deflateInit2.  This can be
@@ -525,8 +528,8 @@ extern int ZEXPORT deflateParams OF((z_streamp strm, int level, int strategy));
 */
 
 /*   
-extern int ZEXPORT inflateInit2 OF((z_streamp strm,
+ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
-                                    int  windowBits));
+                                     int  windowBits));
 
      This is another version of inflateInit with an extra parameter. The
    fields next_in, avail_in, zalloc, zfree and opaque must be initialized
@@ -547,9 +550,9 @@ extern int ZEXPORT inflateInit2 OF((z_streamp strm,
    modified, but next_out and avail_out are unchanged.)
 */
 
-extern int ZEXPORT inflateSetDictionary OF((z_streamp strm,
+ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
-                                            const Bytef *dictionary,
+                                             const Bytef *dictionary,
-                                            uInt  dictLength));
+                                             uInt  dictLength));
 /*
      Initializes the decompression dictionary from the given uncompressed byte
    sequence. This function must be called immediately after a call of inflate
@@ -566,7 +569,7 @@ extern int ZEXPORT inflateSetDictionary OF((z_streamp strm,
    inflate().
 */
 
-extern int ZEXPORT inflateSync OF((z_streamp strm));
+ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
 /* 
     Skips invalid compressed data until a full flush point (see above the
   description of deflate with Z_FULL_FLUSH) can be found, or until all
@@ -581,7 +584,7 @@ extern int ZEXPORT inflateSync OF((z_streamp strm));
   until success or end of the input data.
 */
 
-extern int ZEXPORT inflateReset OF((z_streamp strm));
+ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
 /*
      This function is equivalent to inflateEnd followed by inflateInit,
    but does not free and reallocate all the internal decompression state.
@@ -602,8 +605,8 @@ extern int ZEXPORT inflateReset OF((z_streamp strm));
    utility functions can easily be modified if you need special options.
 */
 
-extern int ZEXPORT compress OF((Bytef *dest,   uLongf *destLen,
+ZEXTERN int ZEXPORT compress OF((Bytef *dest,   uLongf *destLen,
-                                const Bytef *source, uLong sourceLen));
+                                 const Bytef *source, uLong sourceLen));
 /*
      Compresses the source buffer into the destination buffer.  sourceLen is
    the byte length of the source buffer. Upon entry, destLen is the total
@@ -617,9 +620,9 @@ extern int ZEXPORT compress OF((Bytef *dest,   uLongf *destLen,
    buffer.
 */
 
-extern int ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
+ZEXTERN int ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
-                                 const Bytef *source, uLong sourceLen,
+                                  const Bytef *source, uLong sourceLen,
-                                 int level));
+                                  int level));
 /*
      Compresses the source buffer into the destination buffer. The level
    parameter has the same meaning as in deflateInit.  sourceLen is the byte
@@ -632,8 +635,8 @@ extern int ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
    Z_STREAM_ERROR if the level parameter is invalid.
 */
 
-extern int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
+ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
-                                  const Bytef *source, uLong sourceLen));
+                                   const Bytef *source, uLong sourceLen));
 /*
      Decompresses the source buffer into the destination buffer.  sourceLen is
    the byte length of the source buffer. Upon entry, destLen is the total
@@ -653,7 +656,7 @@ extern int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
 
 typedef voidp gzFile;
 
-extern gzFile ZEXPORT gzopen  OF((const char *path, const char *mode));
+ZEXTERN gzFile ZEXPORT gzopen  OF((const char *path, const char *mode));
 /*
      Opens a gzip (.gz) file for reading or writing. The mode parameter
    is as in fopen ("rb" or "wb") but can also include a compression level
@@ -669,7 +672,7 @@ extern gzFile ZEXPORT gzopen  OF((const char *path, const char *mode));
    can be checked to distinguish the two cases (if errno is zero, the
    zlib error is Z_MEM_ERROR).  */
 
-extern gzFile ZEXPORT gzdopen  OF((int fd, const char *mode));
+ZEXTERN gzFile ZEXPORT gzdopen  OF((int fd, const char *mode));
 /*
      gzdopen() associates a gzFile with the file descriptor fd.  File
    descriptors are obtained from calls like open, dup, creat, pipe or
@@ -682,7 +685,7 @@ extern gzFile ZEXPORT gzdopen  OF((int fd, const char *mode));
    the (de)compression state.
 */
 
-extern int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
+ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
 /*
      Dynamically update the compression level or strategy. See the description
    of deflateInit2 for the meaning of these parameters.
@@ -690,7 +693,7 @@ extern int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
    opened for writing.
 */
 
-extern int ZEXPORT    gzread  OF((gzFile file, voidp buf, unsigned len));
+ZEXTERN int ZEXPORT    gzread  OF((gzFile file, voidp buf, unsigned len));
 /*
      Reads the given number of uncompressed bytes from the compressed file.
    If the input file was not in gzip format, gzread copies the given number
@@ -698,28 +701,29 @@ extern int ZEXPORT    gzread  OF((gzFile file, voidp buf, unsigned len));
      gzread returns the number of uncompressed bytes actually read (0 for
    end of file, -1 for error). */
 
-extern int ZEXPORT    gzwrite OF((gzFile file, const voidp buf, unsigned len));
+ZEXTERN int ZEXPORT    gzwrite OF((gzFile file, 
+				   const voidp buf, unsigned len));
 /*
      Writes the given number of uncompressed bytes into the compressed file.
    gzwrite returns the number of uncompressed bytes actually written
    (0 in case of error).
 */
 
-extern int ZEXPORTVA   gzprintf OF((gzFile file, const char *format, ...));
+ZEXTERN int ZEXPORTVA   gzprintf OF((gzFile file, const char *format, ...));
 /*
      Converts, formats, and writes the args to the compressed file under
    control of the format string, as in fprintf. gzprintf returns the number of
    uncompressed bytes actually written (0 in case of error).
 */
 
-extern int ZEXPORT gzputs OF((gzFile file, const char *s));
+ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
 /*
       Writes the given null-terminated string to the compressed file, excluding
    the terminating null character.
       gzputs returns the number of characters written, or -1 in case of error.
 */
 
-extern char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
+ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
 /*
       Reads bytes from the compressed file until len-1 characters are read, or
    a newline character is read and transferred to buf, or an end-of-file
@@ -728,19 +732,19 @@ extern char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
       gzgets returns buf, or Z_NULL in case of error.
 */
 
-extern int ZEXPORT    gzputc OF((gzFile file, int c));
+ZEXTERN int ZEXPORT    gzputc OF((gzFile file, int c));
 /*
       Writes c, converted to an unsigned char, into the compressed file.
    gzputc returns the value that was written, or -1 in case of error.
 */
 
-extern int ZEXPORT    gzgetc OF((gzFile file));
+ZEXTERN int ZEXPORT    gzgetc OF((gzFile file));
 /*
       Reads one byte from the compressed file. gzgetc returns this byte
    or -1 in case of end of file or error.
 */
 
-extern int ZEXPORT    gzflush OF((gzFile file, int flush));
+ZEXTERN int ZEXPORT    gzflush OF((gzFile file, int flush));
 /*
      Flushes all pending output into the compressed file. The parameter
    flush is as in the deflate() function. The return value is the zlib
@@ -750,10 +754,11 @@ extern int ZEXPORT    gzflush OF((gzFile file, int flush));
    degrade compression.
 */
 
-extern z_off_t ZEXPORT    gzseek OF((gzFile file, z_off_t offset, int whence));
+ZEXTERN z_off_t ZEXPORT    gzseek OF((gzFile file,
+				      z_off_t offset, int whence));
 /* 
-      Sets the starting position for the next gzread or gzwrite on the given
+      Sets the starting position for the next gzread or gzwrite on the
-   compressed file. The offset represents a number of bytes in the
+   given compressed file. The offset represents a number of bytes in the
    uncompressed data stream. The whence parameter is defined as in lseek(2);
    the value SEEK_END is not supported.
      If the file is opened for reading, this function is emulated but can be
@@ -767,14 +772,14 @@ extern z_off_t ZEXPORT    gzseek OF((gzFile file, z_off_t offset, int whence));
    would be before the current position.
 */
 
-extern int ZEXPORT    gzrewind OF((gzFile file));
+ZEXTERN int ZEXPORT    gzrewind OF((gzFile file));
 /*
      Rewinds the given file. This function is supported only for reading.
 
    gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
 */
 
-extern z_off_t ZEXPORT    gztell OF((gzFile file));
+ZEXTERN z_off_t ZEXPORT    gztell OF((gzFile file));
 /*
      Returns the starting position for the next gzread or gzwrite on the
    given compressed file. This position represents a number of bytes in the
@@ -783,20 +788,20 @@ extern z_off_t ZEXPORT    gztell OF((gzFile file));
    gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
 */
 
-extern int ZEXPORT gzeof OF((gzFile file));
+ZEXTERN int ZEXPORT gzeof OF((gzFile file));
 /*
      Returns 1 when EOF has previously been detected reading the given
    input stream, otherwise zero.
 */
 
-extern int ZEXPORT    gzclose OF((gzFile file));
+ZEXTERN int ZEXPORT    gzclose OF((gzFile file));
 /*
      Flushes all pending output if necessary, closes the compressed file
    and deallocates all the (de)compression state. The return value is the zlib
    error number (see function gzerror below).
 */
 
-extern const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
+ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
 /*
      Returns the error message for the last error which occurred on the
    given compressed file. errnum is set to zlib error number. If an
@@ -813,7 +818,7 @@ extern const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
    compression library.
 */
 
-extern uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
+ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
 
 /*
      Update a running Adler-32 checksum with the bytes buf[0..len-1] and
@@ -830,7 +835,7 @@ extern uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
      if (adler != original_adler) error();
 */
 
-extern uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
+ZEXTERN uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
 /*
      Update a running crc with the bytes buf[0..len-1] and return the updated
    crc. If buf is NULL, this function returns the required initial value
@@ -852,16 +857,16 @@ extern uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
 /* deflateInit and inflateInit are macros to allow checking the zlib version
  * and the compiler's view of z_stream:
  */
-extern int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
+ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
-                                    const char *version, int stream_size));
-extern int ZEXPORT inflateInit_ OF((z_streamp strm,
-                                    const char *version, int stream_size));
-extern int ZEXPORT deflateInit2_ OF((z_streamp strm, int  level, int  method,
-                                     int windowBits, int memLevel,
-                                     int strategy, const char *version,
-                                     int stream_size));
-extern int ZEXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
                                      const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
+                                     const char *version, int stream_size));
+ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int  level, int  method,
+                                      int windowBits, int memLevel,
+                                      int strategy, const char *version,
+                                      int stream_size));
+ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
+                                      const char *version, int stream_size));
 #define deflateInit(strm, level) \
         deflateInit_((strm), (level),       ZLIB_VERSION, sizeof(z_stream))
 #define inflateInit(strm) \
@@ -877,9 +882,9 @@ extern int ZEXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
     struct internal_state {int dummy;}; /* hack for buggy compilers */
 #endif
 
-extern const char   * ZEXPORT zError           OF((int err));
+ZEXTERN const char   * ZEXPORT zError           OF((int err));
-extern int            ZEXPORT inflateSyncPoint OF((z_streamp z));
+ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp z));
-extern const uLongf * ZEXPORT get_crc_table    OF((void));
+ZEXTERN const uLongf * ZEXPORT get_crc_table    OF((void));
 
 #ifdef __cplusplus
 }

zutil.c

@@ -60,7 +60,7 @@ const char * ZEXPORT zError(err)
 
 void zmemcpy(dest, source, len)
     Bytef* dest;
-    Bytef* source;
+    const Bytef* source;
     uInt  len;
 {
     if (len == 0) return;
@@ -70,8 +70,8 @@ void zmemcpy(dest, source, len)
 }
 
 int zmemcmp(s1, s2, len)
-    Bytef* s1;
+    const Bytef* s1;
-    Bytef* s2;
+    const Bytef* s2;
     uInt  len;
 {
     uInt j;
@@ -178,7 +178,7 @@ void  zcfree (voidpf opaque, voidpf ptr)
 
 #  define MY_ZCALLOC
 
-#if (!defined(_MSC_VER) || (_MSC_VER < 600))
+#if (!defined(_MSC_VER) || (_MSC_VER <= 600))
 #  define _halloc  halloc
 #  define _hfree   hfree
 #endif

zutil.h

@@ -75,7 +75,7 @@ extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
 
 #ifdef MSDOS
 #  define OS_CODE  0x00
-#  ifdef __TURBOC__
+#  if defined(__TURBOC__) || defined(__BORLANDC__)
 #    if(__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
        /* Allow compilation with ANSI keywords only enabled */
        void _Cdecl farfree( void *block );
@@ -112,13 +112,12 @@ extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
 
 #if defined(MACOS) || defined(TARGET_OS_MAC)
 #  define OS_CODE  0x07
-#  ifndef fdopen
+#  if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
-#    define fdopen(fd,mode) NULL /* No fdopen() */
+#    include <unix.h> /* for fdopen */
-#  endif
+#  else
-#endif
+#    ifndef fdopen
-#if defined(__MWERKS__) && !defined(fdopen)
+#      define fdopen(fd,mode) NULL /* No fdopen() */
-#  if __dest_os != __be_os && __dest_os != __win32_os
+#    endif
-#    define fdopen(fd,mode) NULL
 #  endif
 #endif
 
@@ -134,7 +133,7 @@ extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
 #  define fdopen(fd,mode) NULL /* No fdopen() */
 #endif
 
-#if (defined(_MSC_VER) && (_MSC_VER >= 600))
+#if (defined(_MSC_VER) && (_MSC_VER > 600))
 #  define fdopen(fd,type)  _fdopen(fd,type)
 #endif
 
@@ -182,8 +181,8 @@ extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
 #    define zmemzero(dest, len) memset(dest, 0, len)
 #  endif
 #else
-   extern void zmemcpy  OF((Bytef* dest, Bytef* source, uInt len));
+   extern void zmemcpy  OF((Bytef* dest, const Bytef* source, uInt len));
-   extern int  zmemcmp  OF((Bytef* s1,   Bytef* s2, uInt len));
+   extern int  zmemcmp  OF((const Bytef* s1, const Bytef* s2, uInt len));
    extern void zmemzero OF((Bytef* dest, uInt len));
 #endif