zlib 1.0.8

ChangeLog

@@ -1,6 +1,32 @@
 
 		ChangeLog file for zlib
 
+Changes in 1.0.8 (27 Jan 1998)
+- fixed offsets in contrib/asm386/gvmat32.asm (Gilles Vollant)
+- fix gzgetc and gzputc for big endian systems (Markus Oberhumer)
+- added compress2() to allow setting the compression level
+- include sys/types.h to get off_t on some systems (Marc Lehmann & QingLong)
+- use constant arrays for the static trees in trees.c instead of computing
+  them at run time (thanks to Ken Raeburn for this suggestion). To create
+  trees.h, compile with GEN_TREES_H and run "make test".
+- check return code of example in "make test" and display result
+- pass minigzip command line options to file_compress
+- simplifying code of inflateSync to avoid gcc 2.8 bug
+
+- support CC="gcc -Wall" in configure -s (QingLong)
+- avoid a flush caused by ftell in gzopen for write mode (Ken Raeburn)
+- fix test for shared library support to avoid compiler warnings
+- zlib.lib -> zlib.dll in msdos/zlib.rc (Gilles Vollant)
+- check for TARGET_OS_MAC in addition to MACOS (Brad Pettit)
+- do not use fdopen for Metrowerks on Mac (Brad Pettit))
+- add checks for gzputc and gzputc in example.c
+- avoid warnings in gzio.c and deflate.c (Andreas Kleinert)
+- use const for the CRC table (Ken Raeburn)
+- fixed "make uninstall" for shared libraries
+- use Tracev instead of Trace in infblock.c
+- in example.c use correct compressed length for test_sync
+- suppress +vnocompatwarnings in configure for HPUX (not always supported)
+
 Changes in 1.0.7 (20 Jan 1998)
 - fix gzseek which was broken in write mode
 - return error for gzseek to negative absolute position
@@ -81,7 +107,6 @@ Changes in 1.0.6 (19 Jan 1998)
 - in Makefile.dj2, use copy and del instead of install and rm (Frank Donahoe)
 - Avoid expanded $Id$. Use "rcs -kb" or "cvs admin -kb" to avoid Id expansion.
 - check for unistd.h in configure (for off_t)
-- use Tracev instead of Trace in infblock.c
 - remove useless check parameter in inflate_blocks_free
 - avoid useless assignment of s->check to itself in inflate_blocks_new
 - do not flush twice in gzclose (thanks to Ken Raeburn)

Makefile

@@ -5,6 +5,7 @@
 # To compile and test, type:
 #   ./configure; make test
 # The call of configure is optional if you don't have special requirements
+# If you wish to build zlib as a shared library, use: ./configure -s
 
 # To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
 #    make install
@@ -22,7 +23,7 @@ CFLAGS=-O
 LDFLAGS=-L. -lz
 LDSHARED=$(CC)
 
-VER=1.0.7
+VER=1.0.8
 LIBS=libz.a
 SHAREDLIB=libz.so
 
@@ -51,8 +52,13 @@ all: example minigzip
 
 test: all
 	@LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
-	./example ; \
+	echo hello world | ./minigzip | ./minigzip -d || \
-	echo hello world | ./minigzip | ./minigzip -d
+	  echo '		*** minigzip test FAILED ***' ; \
+	if ./example; then \
+	  echo '		*** zlib test OK ***'; \
+	else \
+	  echo '		*** zlib test FAILED ***'; \
+	fi
 
 libz.a: $(OBJS)
 	$(AR) $@ $(OBJS)
@@ -88,12 +94,16 @@ install: $(LIBS)
 # ldconfig is for Linux
 
 uninstall:
-	cd $(exec_prefix)/lib; rm -f $(LIBS); \
+	cd $(prefix)/include; \
-	if test -f $(SHAREDLIB); then \
+	v=$(VER); \
-	 v=`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p'<$(prefix)/include/zlib.h`;\
+	if test -f zlib.h; then \
-	 rm -f $(SHAREDLIB).$$v $(SHAREDLIB); \
+	  v=`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`; \
+          rm -f zlib.h zconf.h; \
+	fi; \
+	cd $(exec_prefix)/lib; rm -f libz.a; \
+	if test -f $(SHAREDLIB).$$v; then \
+	  rm -f $(SHAREDLIB).$$v $(SHAREDLIB) $(SHAREDLIB).1; \
 	fi
-	cdz $(prefix)/include; rm -f zlib.h zconf.h
 
 clean:
 	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz
@@ -141,6 +151,6 @@ inflate.o: zutil.h zlib.h zconf.h infblock.h
 inftrees.o: zutil.h zlib.h zconf.h inftrees.h
 infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
 minigzip.o:  zlib.h zconf.h 
-trees.o: deflate.h zutil.h zlib.h zconf.h 
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
 uncompr.o: zlib.h zconf.h
 zutil.o: zutil.h zlib.h zconf.h  

Makefile.in

@@ -5,6 +5,7 @@
 # To compile and test, type:
 #   ./configure; make test
 # The call of configure is optional if you don't have special requirements
+# If you wish to build zlib as a shared library, use: ./configure -s
 
 # To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
 #    make install
@@ -22,7 +23,7 @@ CFLAGS=-O
 LDFLAGS=-L. -lz
 LDSHARED=$(CC)
 
-VER=1.0.7
+VER=1.0.8
 LIBS=libz.a
 SHAREDLIB=libz.so
 
@@ -51,8 +52,13 @@ all: example minigzip
 
 test: all
 	@LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
-	./example ; \
+	echo hello world | ./minigzip | ./minigzip -d || \
-	echo hello world | ./minigzip | ./minigzip -d
+	  echo '		*** minigzip test FAILED ***' ; \
+	if ./example; then \
+	  echo '		*** zlib test OK ***'; \
+	else \
+	  echo '		*** zlib test FAILED ***'; \
+	fi
 
 libz.a: $(OBJS)
 	$(AR) $@ $(OBJS)
@@ -88,12 +94,16 @@ install: $(LIBS)
 # ldconfig is for Linux
 
 uninstall:
-	cd $(exec_prefix)/lib; rm -f $(LIBS); \
+	cd $(prefix)/include; \
-	if test -f $(SHAREDLIB); then \
+	v=$(VER); \
-	 v=`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p'<$(prefix)/include/zlib.h`;\
+	if test -f zlib.h; then \
-	 rm -f $(SHAREDLIB).$$v $(SHAREDLIB); \
+	  v=`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`; \
+          rm -f zlib.h zconf.h; \
+	fi; \
+	cd $(exec_prefix)/lib; rm -f libz.a; \
+	if test -f $(SHAREDLIB).$$v; then \
+	  rm -f $(SHAREDLIB).$$v $(SHAREDLIB) $(SHAREDLIB).1; \
 	fi
-	cdz $(prefix)/include; rm -f zlib.h zconf.h
 
 clean:
 	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz
@@ -141,6 +151,6 @@ inflate.o: zutil.h zlib.h zconf.h infblock.h
 inftrees.o: zutil.h zlib.h zconf.h inftrees.h
 infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
 minigzip.o:  zlib.h zconf.h 
-trees.o: deflate.h zutil.h zlib.h zconf.h 
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
 uncompr.o: zlib.h zconf.h
 zutil.o: zutil.h zlib.h zconf.h  

README

@@ -1,15 +1,16 @@
-zlib 1.0.7 is a general purpose data compression library.  All the code
+zlib 1.0.8 is a general purpose data compression library.  All the code
-is reentrant (thread safe).  The data format used by the zlib library
+is thread safe.  The data format used by the zlib library
 is described by RFCs (Request for Comments) 1950 to 1952 in the files 
 ftp://ds.internic.net/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate
 format) and rfc1952.txt (gzip format). These documents are also available in
 other formats from ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
 
-All functions of the compression library are documented in the file
+All functions of the compression library are documented in the file zlib.h
-zlib.h. A usage example of the library is given in the file example.c
+(volunteer to write man pages welcome, contact jloup@gzip.org). A usage
-which also tests that the library is working correctly. Another
+example of the library is given in the file example.c which also tests that
-example is given in the file minigzip.c. The compression library itself
+the library is working correctly. Another example is given in the file
-is composed of all source files except example.c and minigzip.c.
+minigzip.c. The compression library itself is composed of all source files
+except example.c and minigzip.c.
 
 To compile all files and run the test program, follow the instructions
 given at the top of Makefile. In short "make test; make install"
@@ -24,18 +25,18 @@ Mark Nelson wrote an article about zlib for the Jan. 1997 issue of
 Dr. Dobb's Journal; a copy of the article is available in
 http://web2.airmail.net/markn/articles/zlibtool/zlibtool.htm
 
-The changes made in version 1.0.7 are documented in the file ChangeLog.
+The changes made in version 1.0.8 are documented in the file ChangeLog.
-The main changes since 1.0.6 are:
+The main changes since 1.0.7 are:
 
-- fix gzseek which was broken in write mode
+- fixed offsets in contrib/asm386/gvmat32.asm (Gilles Vollant)
-- return error for gzseek to negative absolute position
+- fix gzgetc and gzputc for big endian systems (Markus Oberhumer)
-- fix configure for Linux (Chun-Chung Chen)
+- added compress2() to allow setting the compression level
-- increase stack space for MSC (Tim Wegner)
+- include sys/types.h to get off_t on some systems (Marc Lehmann & QingLong)
-- get_crc_table and inflateSyncPoint are EXPORTed (Gilles Vollant)
+- use constant arrays for the static trees in trees.c instead of computing
-- define EXPORTVA for gzprintf (Gilles Vollant)
+  them at run time (thanks to Ken Raeburn for this suggestion). To create
-- added mini man page zlib.3 (Rick Rodgers) [volunteers to write full
+  trees.h, compile with GEN_TREES_H and run "make test".
-  man pages from zlib.h most welcome. write to jloup@gzip.org]
+- check return code of example in "make test" and display result
-- for contrib/untgz, fix makedir() and improve Makefile
+- pass minigzip command line options to file_compress
 
 Unsupported third party contributions are provided in directory "contrib".
 
@@ -64,6 +65,9 @@ Notes for some targets:
   See contrib/visual-basic.txt for more information.
   I don't know how to handle structures in Visual Basic, sorry.
 
+- "make test" fails on Solaris 2.6 with gcc 2.8.0. It works with cc and
+   with gcc 2.7.2.1.
+
 - For 64-bit Irix, deflate.c must be compiled without any optimization.
   With -O, one libpng test fails. The test works in 32 bit mode (with
   the -n32 compiler flag). The compiler bug has been reported to SGI.
@@ -74,7 +78,10 @@ Notes for some targets:
 - zlib doesn't work on HP-UX 9.05 with one cc compiler (the one not
   accepting the -O option). It works with the other cc compiler.
 
-- gzdopen is not supported on RISCOS
+- For shared memory multiprocessors, the decompression code assumes that
+  writes to pointers are atomic.
+
+- gzdopen is not supported on RISCOS, BEOS and Mac
 
 - For Turbo C the small model is supported only with reduced performance to
   avoid any far allocation; it was tested with -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3

compress.c

@@ -8,22 +8,22 @@
 #include "zlib.h"
 
 /* ===========================================================================
-     Compresses the source buffer into the destination buffer.  sourceLen is
+     Compresses the source buffer into the destination buffer. The level
-   the byte length of the source buffer. Upon entry, destLen is the total
+   parameter has the same meaning as in deflateInit.  sourceLen is the byte
-   size of the destination buffer, which must be at least 0.1% larger than
+   length of the source buffer. Upon entry, destLen is the total size of the
-   sourceLen plus 8 bytes. Upon exit, destLen is the actual size of the
+   destination buffer, which must be at least 0.1% larger than sourceLen plus
-   compressed buffer.
+   12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
-     This function can be used to compress a whole file at once if the
+
-   input file is mmap'ed.
+     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
-     compress returns Z_OK if success, Z_MEM_ERROR if there was not
+   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
-   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   Z_STREAM_ERROR if the level parameter is invalid.
-   buffer.
 */
-int EXPORT compress (dest, destLen, source, sourceLen)
+int EXPORT compress2 (dest, destLen, source, sourceLen, level)
     Bytef *dest;
     uLongf *destLen;
     const Bytef *source;
     uLong sourceLen;
+    int level;
 {
     z_stream stream;
     int err;
@@ -42,7 +42,7 @@ int EXPORT compress (dest, destLen, source, sourceLen)
     stream.zfree = (free_func)0;
     stream.opaque = (voidpf)0;
 
-    err = deflateInit(&stream, Z_DEFAULT_COMPRESSION);
+    err = deflateInit(&stream, level);
     if (err != Z_OK) return err;
 
     err = deflate(&stream, Z_FINISH);
@@ -55,3 +55,14 @@ int EXPORT compress (dest, destLen, source, sourceLen)
     err = deflateEnd(&stream);
     return err;
 }
+
+/* ===========================================================================
+ */
+int EXPORT compress (dest, destLen, source, sourceLen)
+    Bytef *dest;
+    uLongf *destLen;
+    const Bytef *source;
+    uLong sourceLen;
+{
+    return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION);
+}

configure

@@ -29,15 +29,23 @@ case "$1" in
   -h* | --h*) echo 'syntax: configure [ --shared ]'; exit 0;;
 esac
 
-test -z "$CC" && echo Checking for gcc...
 test=ztest$$
 cat > $test.c <<EOF
-int hello() { printf("hello\n"); }
+extern int getchar();
+int hello() {return getchar();}
 EOF
-if test -z "$CC" -o "$CC" = "gcc" && (gcc -c -O3 $test.c) 2>/dev/null; then
+
-  CC=gcc
+test -z "$CC" && echo Checking for gcc...
+cc=${CC-gcc}
+cflags=${CFLAGS-"-O3"}
+case "$cc" in
+  *gcc*) gcc=1;;
+esac
+
+if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
+  CC="$cc"
   SFLAGS=${CFLAGS-"-fPIC -O3"}
-  CFLAGS=${CFLAGS-"-O3"}
+  CFLAGS="$cflags"
   case `(uname -s || echo unknown) 2>/dev/null` in
   Linux | linux) LDSHARED=${LDSHARED-"gcc -shared -Wl,-soname,libz.so.1"};;
   *)             LDSHARED=${LDSHARED-"gcc -shared"};;
@@ -65,7 +73,8 @@ else
 	     LDSHARED=${LDSHARED-"cc -dy -KPIC -G"};;
   HP-UX*)    SFLAGS=${CFLAGS-"-O +z"}
 	     CFLAGS=${CFLAGS-"-O"}
-	     LDSHARED=${LDSHARED-"ld -b +vnocompatwarnings"}
+#	     LDSHARED=${LDSHARED-"ld -b +vnocompatwarnings"}
+	     LDSHARED=${LDSHARED-"ld -b"}
 	     shared_ext='.sl'
 	     SHAREDLIB='libz.sl';;
   UNIX_System_V\ 4.2.0) 
@@ -108,14 +117,14 @@ fi
 
 # udpate Makefile
 sed < Makefile.in "
-/^CC *=/s,=.*,=$CC,
+/^CC *=/s%=.*%=$CC%
-/^CFLAGS *=/s/=.*/=$CFLAGS/
+/^CFLAGS *=/s%=.*%=$CFLAGS%
 /^LDSHARED *=/s%=.*%=$LDSHARED%
-/^LIBS *=/s,=.*,=$LIBS,
+/^LIBS *=/s%=.*%=$LIBS%
-/^SHAREDLIB *=/s,=.*,=$SHAREDLIB,
+/^SHAREDLIB *=/s%=.*%=$SHAREDLIB%
-/^AR *=/s,=.*,=$AR,
+/^AR *=/s%=.*%=$AR%
-/^RANLIB *=/s,=.*,=$RANLIB,
+/^RANLIB *=/s%=.*%=$RANLIB%
-/^VER *=/s/=.*/=$VER/
+/^VER *=/s%=.*%=$VER%
-/^prefix *=/s,=.*,=$prefix,
+/^prefix *=/s%=.*%=$prefix%
-/^exec_prefix *=/s,=.*,=$exec_prefix,
+/^exec_prefix *=/s%=.*%=$exec_prefix%
 " > Makefile

contrib/README.contrib

@@ -5,8 +5,7 @@ for help about these, not the zlib authors. Thanks.
 
 
 asm386/     by Gilles Vollant <info@winimage.com>
-	386 asm code replacing longest_match(). This code may be slower
+	386 asm code replacing longest_match(), for Visual C++ 4.2 and ML 6.11c
-        than the C code if you have a good compiler.
 
 iostream/   by Kevin Ruland <kevin@rodin.wustl.edu>
         A C++ I/O streams interface to the zlib gz* functions

contrib/asm386/gvmat32.asm

@@ -53,17 +53,19 @@
 @lmtype				TYPEDEF         PROTO C :PTR , :SDWORD
 longest_match_c		PROTO           @lmtype
 
-	dep_max_chain_length	equ	70h
+    ;  all the +4 offsets are due to the addition of pending_buf_size
-	dep_window				equ	2ch
+    ;  in the deflate_state structure since the asm code was first written
-	dep_strstart			equ	60h
+    dep_chain_length    equ     70h+4
-	dep_prev_length			equ 6ch
+    dep_window          equ     2ch+4
-	dep_nice_match			equ 84h
+    dep_strstart        equ     60h+4
-	dep_w_size				equ	20h
+    dep_prev_length     equ     6ch+4
-	dep_prev				equ	34h
+    dep_nice_match      equ     84h+4
-	dep_w_mask				equ	28h
+    dep_w_size          equ     20h+4
-	dep_good_match			equ 80h
+    dep_prev            equ     34h+4
-	dep_match_start			equ	64h
+    dep_w_mask          equ     28h+4
-	dep_lookahead			equ	68h
+    dep_good_match      equ     80h+4
+    dep_match_start     equ     64h+4
+    dep_lookahead       equ     68h+4
 
 
 _TEXT   segment
@@ -461,4 +463,3 @@ _longest_match_asm7fff endp
 
 _TEXT   ends
 end
-					

crc32.c

@@ -45,7 +45,7 @@ local void make_crc_table()
   int n, k;
   uLong poly;            /* polynomial exclusive-or pattern */
   /* terms of polynomial defining this crc (except x^32): */
-  static Byte p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
+  static const Byte p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
 
   /* make exclusive-or pattern from polynomial (0xedb88320L) */
   poly = 0L;
@@ -65,7 +65,7 @@ local void make_crc_table()
 /* ========================================================================
  * Table of CRC-32's of all single-byte values (made by make_crc_table)
  */
-local uLongf crc_table[256] = {
+local const uLongf crc_table[256] = {
   0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L,
   0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L,
   0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L,
@@ -124,12 +124,12 @@ local uLongf crc_table[256] = {
 /* =========================================================================
  * This function can be used by asm versions of crc32()
  */
-uLongf * EXPORT get_crc_table()
+const uLongf * EXPORT get_crc_table()
 {
 #ifdef DYNAMIC_CRC_TABLE
   if (crc_table_empty) make_crc_table();
 #endif
-  return (uLongf *)crc_table;
+  return (const uLongf *)crc_table;
 }
 
 /* ========================================================================= */

deflate.c

@@ -52,7 +52,7 @@
 #include "deflate.h"
 
 const char deflate_copyright[] =
-   " deflate 1.0.7 Copyright 1995-1998 Jean-loup Gailly ";
+   " deflate 1.0.8 Copyright 1995-1998 Jean-loup Gailly ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -842,7 +842,7 @@ local uInt longest_match(s, cur_match)
     } while ((cur_match = prev[cur_match & wmask]) > limit
              && --chain_length != 0);
 
-    if ((uInt)best_len <= s->lookahead) return best_len;
+    if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
     return s->lookahead;
 }
 #endif /* ASMV */

example.c

@@ -41,7 +41,7 @@ void test_large_deflate OF((Byte *compr, uLong comprLen,
 		            Byte *uncompr, uLong uncomprLen));
 void test_large_inflate OF((Byte *compr, uLong comprLen,
 		            Byte *uncompr, uLong uncomprLen));
-void test_flush         OF((Byte *compr, uLong comprLen));
+void test_flush         OF((Byte *compr, uLong *comprLen));
 void test_sync          OF((Byte *compr, uLong comprLen,
 		            Byte *uncompr, uLong uncomprLen));
 void test_dict_deflate  OF((Byte *compr, uLong comprLen));
@@ -69,6 +69,7 @@ void test_compress(compr, comprLen, uncompr, uncomprLen)
 
     if (strcmp((char*)uncompr, hello)) {
         fprintf(stderr, "bad uncompress\n");
+	exit(1);
     } else {
         printf("uncompress(): %s\n", uncompr);
     }
@@ -93,8 +94,10 @@ void test_gzio(out, in, uncompr, uncomprLen)
         fprintf(stderr, "gzopen error\n");
         exit(1);
     }
-    if (gzprintf(file, "%s, %s!", "hello", "hello") != len-1) {
+    gzputc(file, 'h');
+    if (gzprintf(file, "%s, %s!", "ello", "hello") != len-2) {
         fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err));
+	exit(1);
     }
     gzseek(file, 1L, SEEK_CUR); /* add one zero byte */
     gzclose(file);
@@ -108,24 +111,35 @@ void test_gzio(out, in, uncompr, uncomprLen)
     uncomprLen = gzread(file, uncompr, (unsigned)uncomprLen);
     if (uncomprLen != len) {
         fprintf(stderr, "gzread err: %s\n", gzerror(file, &err));
+	exit(1);
     }
     if (strcmp((char*)uncompr, hello)) {
-        fprintf(stderr, "bad gzread\n");
+        fprintf(stderr, "bad gzread: %s\n", (char*)uncompr);
+	exit(1);
     } else {
         printf("gzread(): %s\n", uncompr);
     }
 
-    pos = gzseek(file, -7L, SEEK_CUR);
+    pos = gzseek(file, -8L, SEEK_CUR);
-    if (pos != 7 || gztell(file) != pos) {
+    if (pos != 6 || gztell(file) != pos) {
 	fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n",
 		pos, gztell(file));
+	exit(1);
     }
+
+    if (gzgetc(file) != ' ') {
+	fprintf(stderr, "gzgetc error\n");
+	exit(1);
+    }
+
     uncomprLen = gzread(file, uncompr, (unsigned)uncomprLen);
     if (uncomprLen != 7) {
         fprintf(stderr, "gzread err after gzseek: %s\n", gzerror(file, &err));
+	exit(1);
     }
     if (strcmp((char*)uncompr, hello+7)) {
         fprintf(stderr, "bad gzread after gzseek\n");
+	exit(1);
     } else {
         printf("gzread() after gzseek: %s\n", uncompr);
     }
@@ -206,6 +220,7 @@ void test_inflate(compr, comprLen, uncompr, uncomprLen)
 
     if (strcmp((char*)uncompr, hello)) {
         fprintf(stderr, "bad inflate\n");
+	exit(1);
     } else {
         printf("inflate(): %s\n", uncompr);
     }
@@ -240,6 +255,7 @@ void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
     CHECK_ERR(err, "deflate");
     if (c_stream.avail_in != 0) {
         fprintf(stderr, "deflate not greedy\n");
+	exit(1);
     }
 
     /* Feed in already compressed data and switch to no compression: */
@@ -259,6 +275,7 @@ void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
     err = deflate(&c_stream, Z_FINISH);
     if (err != Z_STREAM_END) {
         fprintf(stderr, "deflate should report Z_STREAM_END\n");
+	exit(1);
     }
     err = deflateEnd(&c_stream);
     CHECK_ERR(err, "deflateEnd");
@@ -299,6 +316,7 @@ void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
 
     if (d_stream.total_out != 2*uncomprLen + comprLen/2) {
         fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out);
+	exit(1);
     } else {
         printf("large_inflate(): OK\n");
     }
@@ -309,7 +327,7 @@ void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
  */
 void test_flush(compr, comprLen)
     Byte *compr;
-    uLong comprLen;
+    uLong *comprLen;
 {
     z_stream c_stream; /* compression stream */
     int err;
@@ -325,7 +343,7 @@ void test_flush(compr, comprLen)
     c_stream.next_in  = (Bytef*)hello;
     c_stream.next_out = compr;
     c_stream.avail_in = 3;
-    c_stream.avail_out = (uInt)comprLen;
+    c_stream.avail_out = (uInt)*comprLen;
     err = deflate(&c_stream, Z_FULL_FLUSH);
     CHECK_ERR(err, "deflate");
 
@@ -338,6 +356,8 @@ void test_flush(compr, comprLen)
     }
     err = deflateEnd(&c_stream);
     CHECK_ERR(err, "deflateEnd");
+
+    *comprLen = c_stream.total_out;
 }
 
 /* ===========================================================================
@@ -376,6 +396,7 @@ void test_sync(compr, comprLen, uncompr, uncomprLen)
     if (err != Z_DATA_ERROR) {
         fprintf(stderr, "inflate should report DATA_ERROR\n");
         /* Because of incorrect adler32 */
+	exit(1);
     }
     err = inflateEnd(&d_stream);
     CHECK_ERR(err, "inflateEnd");
@@ -414,6 +435,7 @@ void test_dict_deflate(compr, comprLen)
     err = deflate(&c_stream, Z_FINISH);
     if (err != Z_STREAM_END) {
         fprintf(stderr, "deflate should report Z_STREAM_END\n");
+	exit(1);
     }
     err = deflateEnd(&c_stream);
     CHECK_ERR(err, "deflateEnd");
@@ -463,6 +485,7 @@ void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
 
     if (strcmp((char*)uncompr, hello)) {
         fprintf(stderr, "bad inflate with dict\n");
+	exit(1);
     } else {
         printf("inflate with dictionary: %s\n", uncompr);
     }
@@ -510,8 +533,9 @@ int main(argc, argv)
     test_large_deflate(compr, comprLen, uncompr, uncomprLen);
     test_large_inflate(compr, comprLen, uncompr, uncomprLen);
 
-    test_flush(compr, comprLen);
+    test_flush(compr, &comprLen);
     test_sync(compr, comprLen, uncompr, uncomprLen);
+    comprLen = uncomprLen;
 
     test_dict_deflate(compr, comprLen);
     test_dict_inflate(compr, comprLen, uncompr, uncomprLen);

gzio.c

@@ -150,7 +150,12 @@ local gzFile gz_open (path, mode, fd)
          */
         fprintf(s->file, "%c%c%c%c%c%c%c%c%c%c", gz_magic[0], gz_magic[1],
              Z_DEFLATED, 0 /*flags*/, 0,0,0,0 /*time*/, 0 /*xflags*/, OS_CODE);
-	s->startpos = ftell(s->file);
+	s->startpos = 10L;
+	/* We use 10L instead of ftell(s->file) to because ftell causes an
+         * fflush on some systems. This version of the library doesn't use
+         * startpos anyway in write mode, so this initialization is not
+         * necessary.
+         */
     } else {
 	check_header(s); /* skip the .gz header */
 	s->startpos = (ftell(s->file) - s->stream.avail_in);
@@ -423,7 +428,7 @@ int EXPORT gzread (file, buf, len)
 int EXPORT gzgetc(file)
     gzFile file;
 {
-    int c;
+    unsigned char c;
 
     return gzread(file, &c, 1) == 1 ? c : -1;
 }
@@ -524,7 +529,9 @@ int EXPORT gzputc(file, c)
     gzFile file;
     int c;
 {
-    return gzwrite(file, &c, 1) == 1 ? c : -1;
+    unsigned char cc = (unsigned char) c; /* required for big endian systems */
+
+    return gzwrite(file, &cc, 1) == 1 ? (int)cc : -1;
 }
 
 
@@ -627,7 +634,7 @@ z_off_t EXPORT gzseek (file, offset, whence)
 
 	    offset -= size;
 	}
-	return s->stream.total_in;
+	return (z_off_t)s->stream.total_in;
 #endif
     }
     /* Rest of function is for reading only */
@@ -667,7 +674,7 @@ z_off_t EXPORT gzseek (file, offset, whence)
 	if (size <= 0) return -1L;
 	offset -= size;
     }
-    return s->stream.total_out;
+    return (z_off_t)s->stream.total_out;
 }
 
 /* ===========================================================================

infblock.c

@@ -82,7 +82,7 @@ uLongf *c;
   s->read = s->write = s->window;
   if (s->checkfn != Z_NULL)
     z->adler = s->check = (*s->checkfn)(0L, (const Bytef *)Z_NULL, 0);
-  Trace((stderr, "inflate:   blocks reset\n"));
+  Tracev((stderr, "inflate:   blocks reset\n"));
 }
 
 
@@ -104,7 +104,7 @@ uInt w;
   s->end = s->window + w;
   s->checkfn = c;
   s->mode = TYPE;
-  Trace((stderr, "inflate:   blocks allocated\n"));
+  Tracev((stderr, "inflate:   blocks allocated\n"));
   inflate_blocks_reset(s, z, Z_NULL);
   return s;
 }
@@ -139,7 +139,7 @@ int r;
       switch (t >> 1)
       {
         case 0:                         /* stored */
-          Trace((stderr, "inflate:     stored block%s\n",
+          Tracev((stderr, "inflate:     stored block%s\n",
                  s->last ? " (last)" : ""));
           DUMPBITS(3)
           t = k & 7;                    /* go to byte boundary */
@@ -147,7 +147,7 @@ int r;
           s->mode = LENS;               /* get length of stored block */
           break;
         case 1:                         /* fixed */
-          Trace((stderr, "inflate:     fixed codes block%s\n",
+          Tracev((stderr, "inflate:     fixed codes block%s\n",
                  s->last ? " (last)" : ""));
           {
             uInt bl, bd;
@@ -167,7 +167,7 @@ int r;
           s->mode = CODES;
           break;
         case 2:                         /* dynamic */
-          Trace((stderr, "inflate:     dynamic codes block%s\n",
+          Tracev((stderr, "inflate:     dynamic codes block%s\n",
                  s->last ? " (last)" : ""));
           DUMPBITS(3)
           s->mode = TABLE;
@@ -387,7 +387,7 @@ z_streamp z;
   inflate_blocks_reset(s, z, Z_NULL);
   ZFREE(z, s->window);
   ZFREE(z, s);
-  Trace((stderr, "inflate:   blocks freed\n"));
+  Tracev((stderr, "inflate:   blocks freed\n"));
   return Z_OK;
 }
 

inflate.c

@@ -321,7 +321,8 @@ z_streamp z;
   /* search */
   while (n && m < 4)
   {
-    if (*p == (Byte)(m < 2 ? 0 : 0xff))
+    static const Byte mark[4] = {0, 0, 0xff, 0xff};
+    if (*p == mark[m])
       m++;
     else if (*p)
       m = 0;

inftrees.c

@@ -7,7 +7,7 @@
 #include "inftrees.h"
 
 const char inflate_copyright[] =
-   " inflate 1.0.7 Copyright 1995-1998 Mark Adler ";
+   " inflate 1.0.8 Copyright 1995-1998 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot

minigzip.c

@@ -66,7 +66,7 @@ char *prog;
 void error           OF((const char *msg));
 void gz_compress     OF((FILE   *in, gzFile out));
 void gz_uncompress   OF((gzFile in, FILE   *out));
-void file_compress   OF((char  *file));
+void file_compress   OF((char  *file, char *mode));
 void file_uncompress OF((char  *file));
 int  main            OF((int argc, char *argv[]));
 
@@ -135,8 +135,9 @@ void gz_uncompress(in, out)
  * Compress the given file: create a corresponding .gz file and remove the
  * original.
  */
-void file_compress(file)
+void file_compress(file, mode)
     char  *file;
+    char  *mode;
 {
     local char outfile[MAX_NAME_LEN];
     FILE  *in;
@@ -150,7 +151,7 @@ void file_compress(file)
         perror(file);
         exit(1);
     }
-    out = gzopen(outfile, "wb"); /* use "wb9" for maximal compression */
+    out = gzopen(outfile, mode);
     if (out == NULL) {
         fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile);
         exit(1);
@@ -253,7 +254,7 @@ int main(argc, argv)
             if (uncompr) {
                 file_uncompress(*argv);
             } else {
-                file_compress(*argv);
+                file_compress(*argv, outmode);
             }
         } while (argv++, --argc);
     }

msdos/zlib.def

@@ -8,7 +8,7 @@ SUBSYSTEM	WINDOWS
 
 STUB		'WINSTUB.EXE'
 
-VERSION		1.07
+VERSION		1.08
 
 CODE		 EXECUTE READ
 

msdos/zlib.rc

@@ -2,8 +2,8 @@
 
 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1,0,7,0
+  FILEVERSION	 1,0,8,0
-  PRODUCTVERSION 1,0,7,0
+  PRODUCTVERSION 1,0,8,0
   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
   FILEFLAGS	0
   FILEOS	VOS_DOS_WINDOWS32
@@ -17,9 +17,9 @@ BEGIN
 
     BEGIN
       VALUE "FileDescription", "zlib data compression library\0"
-      VALUE "FileVersion",	"1.0.7\0"
+      VALUE "FileVersion",	"1.0.8\0"
       VALUE "InternalName",	"zlib\0"
-      VALUE "OriginalFilename",	"zlib.lib\0"
+      VALUE "OriginalFilename",	"zlib.dll\0"
       VALUE "ProductName",	"ZLib.DLL\0"
       VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
       VALUE "LegalCopyright", "(C) 1995-1998 Jean-loup Gailly & Mark Adler\0"

test.c

@@ -0,0 +1,2 @@
+extern int getchar();
+int hello() {return getchar();}

trees.c

@@ -31,6 +31,8 @@
 
 /* @(#) $Id$ */
 
+/* #define GEN_TREES_H */
+
 #include "deflate.h"
 
 #ifdef DEBUG
@@ -80,6 +82,11 @@ local const uch bl_order[BL_CODES]
  * Local data. These are initialized only once.
  */
 
+#define DIST_CODE_LEN  512 /* see definition of array dist_code below */
+
+#if defined(GEN_TREES_H) || !defined(STDC)
+/* non ANSI compilers may not accept trees.h */
+
 local ct_data static_ltree[L_CODES+2];
 /* The static literal tree. Since the bit lengths are imposed, there is no
  * need for the L_CODES extra codes used during heap construction. However
@@ -92,8 +99,8 @@ local ct_data static_dtree[D_CODES];
  * 5 bits.)
  */
 
-local uch dist_code[512];
+local uch dist_code[DIST_CODE_LEN];
-/* distance codes. The first 256 values correspond to the distances
+/* Distance codes. The first 256 values correspond to the distances
  * 3 .. 258, the last 256 values correspond to the top 8 bits of
  * the 15 bit distances.
  */
@@ -107,8 +114,12 @@ local int base_length[LENGTH_CODES];
 local int base_dist[D_CODES];
 /* First normalized distance for each code (0 = distance of 1) */
 
+#else
+#  include "trees.h"
+#endif /* GEN_TREES_H */
+
 struct static_tree_desc_s {
-    ct_data *static_tree;        /* static tree or NULL */
+    const ct_data *static_tree;  /* static tree or NULL */
     const intf *extra_bits;      /* extra bits for each code or NULL */
     int     extra_base;          /* base index for extra_bits */
     int     elems;               /* max number of elements in the tree */
@@ -122,7 +133,7 @@ local static_tree_desc  static_d_desc =
 {static_dtree, extra_dbits, 0,          D_CODES, MAX_BITS};
 
 local static_tree_desc  static_bl_desc =
-{(ct_data *)0, extra_blbits, 0,      BL_CODES, MAX_BL_BITS};
+{(const ct_data *)0, extra_blbits, 0,   BL_CODES, MAX_BL_BITS};
 
 /* ===========================================================================
  * Local (static) routines in this file.
@@ -148,6 +159,10 @@ local void bi_flush       OF((deflate_state *s));
 local void copy_block     OF((deflate_state *s, charf *buf, unsigned len,
                               int header));
 
+#ifdef GEN_TREES_H
+local void gen_trees_header OF((void));
+#endif
+
 #ifndef DEBUG
 #  define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len)
    /* Send a code of the given tree. c and tree must not have side effects */
@@ -226,12 +241,11 @@ local void send_bits(s, value, length)
 /* the arguments must not have side effects */
 
 /* ===========================================================================
- * Initialize the various 'constant' tables. In a multi-threaded environment,
+ * Initialize the various 'constant' tables.
- * this function may be called by two threads concurrently, but this is
- * harmless since both invocations do exactly the same thing.
  */
 local void tr_static_init()
 {
+#if defined(GEN_TREES_H) || !defined(STDC)
     static int static_init_done = 0;
     int n;        /* iterates over tree elements */
     int bits;     /* bit counter */
@@ -295,8 +309,74 @@ local void tr_static_init()
         static_dtree[n].Code = bi_reverse((unsigned)n, 5);
     }
     static_init_done = 1;
+
+#  ifdef GEN_TREES_H
+    gen_trees_header();
+#  endif
+#endif /* defined(GEN_TREES_H) || !defined(STDC) */
 }
 
+/* ===========================================================================
+ * Genererate the file trees.h describing the static trees.
+ */
+#ifdef GEN_TREES_H
+#  ifndef DEBUG
+#    include <stdio.h>
+#  endif
+
+#  define SEPARATOR(i, last, width) \
+      ((i) == (last)? "\n};\n\n" :    \
+       ((i) % (width) == (width)-1 ? ",\n" : ", "))
+
+void gen_trees_header()
+{
+    FILE *header = fopen("trees.h", "w");
+    int i;
+
+    Assert (header != NULL, "Can't open trees.h");
+    fprintf(header,
+	    "/* header created automatically with -DGEN_TREES_H */\n\n");
+
+    fprintf(header, "local const ct_data static_ltree[L_CODES+2] = {\n");
+    for (i = 0; i < L_CODES+2; i++) {
+	fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code,
+		static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5));
+    }
+
+    fprintf(header, "local const ct_data static_dtree[D_CODES] = {\n");
+    for (i = 0; i < D_CODES; i++) {
+	fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code,
+		static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5));
+    }
+
+    fprintf(header, "local const uch dist_code[DIST_CODE_LEN] = {\n");
+    for (i = 0; i < DIST_CODE_LEN; i++) {
+	fprintf(header, "%2u%s", dist_code[i],
+		SEPARATOR(i, DIST_CODE_LEN-1, 20));
+    }
+
+    fprintf(header, "local const uch length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
+    for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) {
+	fprintf(header, "%2u%s", length_code[i],
+		SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20));
+    }
+
+    fprintf(header, "local const int base_length[LENGTH_CODES] = {\n");
+    for (i = 0; i < LENGTH_CODES; i++) {
+	fprintf(header, "%1u%s", base_length[i],
+		SEPARATOR(i, LENGTH_CODES-1, 20));
+    }
+
+    fprintf(header, "local const int base_dist[D_CODES] = {\n");
+    for (i = 0; i < D_CODES; i++) {
+	fprintf(header, "%5u%s", base_dist[i],
+		SEPARATOR(i, D_CODES-1, 10));
+    }
+
+    fclose(header);
+}
+#endif /* GEN_TREES_H */
+
 /* ===========================================================================
  * Initialize the tree data structures for a new zlib stream.
  */
@@ -415,7 +495,7 @@ local void gen_bitlen(s, desc)
 {
     ct_data *tree        = desc->dyn_tree;
     int max_code         = desc->max_code;
-    ct_data *stree = desc->stat_desc->static_tree;
+    const ct_data *stree = desc->stat_desc->static_tree;
     const intf *extra    = desc->stat_desc->extra_bits;
     int base             = desc->stat_desc->extra_base;
     int max_length       = desc->stat_desc->max_length;
@@ -543,7 +623,7 @@ local void build_tree(s, desc)
     tree_desc *desc; /* the tree descriptor */
 {
     ct_data *tree         = desc->dyn_tree;
-    ct_data *stree  = desc->stat_desc->static_tree;
+    const ct_data *stree  = desc->stat_desc->static_tree;
     int elems             = desc->stat_desc->elems;
     int n, m;          /* iterate over heap elements */
     int max_code = -1; /* largest code with non zero frequency */

trees.h

@@ -0,0 +1,128 @@
+/* header created automatically with -DGEN_TREES_H */
+
+local const ct_data static_ltree[L_CODES+2] = {
+{{ 12},{  8}}, {{140},{  8}}, {{ 76},{  8}}, {{204},{  8}}, {{ 44},{  8}},
+{{172},{  8}}, {{108},{  8}}, {{236},{  8}}, {{ 28},{  8}}, {{156},{  8}},
+{{ 92},{  8}}, {{220},{  8}}, {{ 60},{  8}}, {{188},{  8}}, {{124},{  8}},
+{{252},{  8}}, {{  2},{  8}}, {{130},{  8}}, {{ 66},{  8}}, {{194},{  8}},
+{{ 34},{  8}}, {{162},{  8}}, {{ 98},{  8}}, {{226},{  8}}, {{ 18},{  8}},
+{{146},{  8}}, {{ 82},{  8}}, {{210},{  8}}, {{ 50},{  8}}, {{178},{  8}},
+{{114},{  8}}, {{242},{  8}}, {{ 10},{  8}}, {{138},{  8}}, {{ 74},{  8}},
+{{202},{  8}}, {{ 42},{  8}}, {{170},{  8}}, {{106},{  8}}, {{234},{  8}},
+{{ 26},{  8}}, {{154},{  8}}, {{ 90},{  8}}, {{218},{  8}}, {{ 58},{  8}},
+{{186},{  8}}, {{122},{  8}}, {{250},{  8}}, {{  6},{  8}}, {{134},{  8}},
+{{ 70},{  8}}, {{198},{  8}}, {{ 38},{  8}}, {{166},{  8}}, {{102},{  8}},
+{{230},{  8}}, {{ 22},{  8}}, {{150},{  8}}, {{ 86},{  8}}, {{214},{  8}},
+{{ 54},{  8}}, {{182},{  8}}, {{118},{  8}}, {{246},{  8}}, {{ 14},{  8}},
+{{142},{  8}}, {{ 78},{  8}}, {{206},{  8}}, {{ 46},{  8}}, {{174},{  8}},
+{{110},{  8}}, {{238},{  8}}, {{ 30},{  8}}, {{158},{  8}}, {{ 94},{  8}},
+{{222},{  8}}, {{ 62},{  8}}, {{190},{  8}}, {{126},{  8}}, {{254},{  8}},
+{{  1},{  8}}, {{129},{  8}}, {{ 65},{  8}}, {{193},{  8}}, {{ 33},{  8}},
+{{161},{  8}}, {{ 97},{  8}}, {{225},{  8}}, {{ 17},{  8}}, {{145},{  8}},
+{{ 81},{  8}}, {{209},{  8}}, {{ 49},{  8}}, {{177},{  8}}, {{113},{  8}},
+{{241},{  8}}, {{  9},{  8}}, {{137},{  8}}, {{ 73},{  8}}, {{201},{  8}},
+{{ 41},{  8}}, {{169},{  8}}, {{105},{  8}}, {{233},{  8}}, {{ 25},{  8}},
+{{153},{  8}}, {{ 89},{  8}}, {{217},{  8}}, {{ 57},{  8}}, {{185},{  8}},
+{{121},{  8}}, {{249},{  8}}, {{  5},{  8}}, {{133},{  8}}, {{ 69},{  8}},
+{{197},{  8}}, {{ 37},{  8}}, {{165},{  8}}, {{101},{  8}}, {{229},{  8}},
+{{ 21},{  8}}, {{149},{  8}}, {{ 85},{  8}}, {{213},{  8}}, {{ 53},{  8}},
+{{181},{  8}}, {{117},{  8}}, {{245},{  8}}, {{ 13},{  8}}, {{141},{  8}},
+{{ 77},{  8}}, {{205},{  8}}, {{ 45},{  8}}, {{173},{  8}}, {{109},{  8}},
+{{237},{  8}}, {{ 29},{  8}}, {{157},{  8}}, {{ 93},{  8}}, {{221},{  8}},
+{{ 61},{  8}}, {{189},{  8}}, {{125},{  8}}, {{253},{  8}}, {{ 19},{  9}},
+{{275},{  9}}, {{147},{  9}}, {{403},{  9}}, {{ 83},{  9}}, {{339},{  9}},
+{{211},{  9}}, {{467},{  9}}, {{ 51},{  9}}, {{307},{  9}}, {{179},{  9}},
+{{435},{  9}}, {{115},{  9}}, {{371},{  9}}, {{243},{  9}}, {{499},{  9}},
+{{ 11},{  9}}, {{267},{  9}}, {{139},{  9}}, {{395},{  9}}, {{ 75},{  9}},
+{{331},{  9}}, {{203},{  9}}, {{459},{  9}}, {{ 43},{  9}}, {{299},{  9}},
+{{171},{  9}}, {{427},{  9}}, {{107},{  9}}, {{363},{  9}}, {{235},{  9}},
+{{491},{  9}}, {{ 27},{  9}}, {{283},{  9}}, {{155},{  9}}, {{411},{  9}},
+{{ 91},{  9}}, {{347},{  9}}, {{219},{  9}}, {{475},{  9}}, {{ 59},{  9}},
+{{315},{  9}}, {{187},{  9}}, {{443},{  9}}, {{123},{  9}}, {{379},{  9}},
+{{251},{  9}}, {{507},{  9}}, {{  7},{  9}}, {{263},{  9}}, {{135},{  9}},
+{{391},{  9}}, {{ 71},{  9}}, {{327},{  9}}, {{199},{  9}}, {{455},{  9}},
+{{ 39},{  9}}, {{295},{  9}}, {{167},{  9}}, {{423},{  9}}, {{103},{  9}},
+{{359},{  9}}, {{231},{  9}}, {{487},{  9}}, {{ 23},{  9}}, {{279},{  9}},
+{{151},{  9}}, {{407},{  9}}, {{ 87},{  9}}, {{343},{  9}}, {{215},{  9}},
+{{471},{  9}}, {{ 55},{  9}}, {{311},{  9}}, {{183},{  9}}, {{439},{  9}},
+{{119},{  9}}, {{375},{  9}}, {{247},{  9}}, {{503},{  9}}, {{ 15},{  9}},
+{{271},{  9}}, {{143},{  9}}, {{399},{  9}}, {{ 79},{  9}}, {{335},{  9}},
+{{207},{  9}}, {{463},{  9}}, {{ 47},{  9}}, {{303},{  9}}, {{175},{  9}},
+{{431},{  9}}, {{111},{  9}}, {{367},{  9}}, {{239},{  9}}, {{495},{  9}},
+{{ 31},{  9}}, {{287},{  9}}, {{159},{  9}}, {{415},{  9}}, {{ 95},{  9}},
+{{351},{  9}}, {{223},{  9}}, {{479},{  9}}, {{ 63},{  9}}, {{319},{  9}},
+{{191},{  9}}, {{447},{  9}}, {{127},{  9}}, {{383},{  9}}, {{255},{  9}},
+{{511},{  9}}, {{  0},{  7}}, {{ 64},{  7}}, {{ 32},{  7}}, {{ 96},{  7}},
+{{ 16},{  7}}, {{ 80},{  7}}, {{ 48},{  7}}, {{112},{  7}}, {{  8},{  7}},
+{{ 72},{  7}}, {{ 40},{  7}}, {{104},{  7}}, {{ 24},{  7}}, {{ 88},{  7}},
+{{ 56},{  7}}, {{120},{  7}}, {{  4},{  7}}, {{ 68},{  7}}, {{ 36},{  7}},
+{{100},{  7}}, {{ 20},{  7}}, {{ 84},{  7}}, {{ 52},{  7}}, {{116},{  7}},
+{{  3},{  8}}, {{131},{  8}}, {{ 67},{  8}}, {{195},{  8}}, {{ 35},{  8}},
+{{163},{  8}}, {{ 99},{  8}}, {{227},{  8}}
+};
+
+local const ct_data static_dtree[D_CODES] = {
+{{ 0},{ 5}}, {{16},{ 5}}, {{ 8},{ 5}}, {{24},{ 5}}, {{ 4},{ 5}},
+{{20},{ 5}}, {{12},{ 5}}, {{28},{ 5}}, {{ 2},{ 5}}, {{18},{ 5}},
+{{10},{ 5}}, {{26},{ 5}}, {{ 6},{ 5}}, {{22},{ 5}}, {{14},{ 5}},
+{{30},{ 5}}, {{ 1},{ 5}}, {{17},{ 5}}, {{ 9},{ 5}}, {{25},{ 5}},
+{{ 5},{ 5}}, {{21},{ 5}}, {{13},{ 5}}, {{29},{ 5}}, {{ 3},{ 5}},
+{{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}}
+};
+
+local const uch dist_code[DIST_CODE_LEN] = {
+ 0,  1,  2,  3,  4,  4,  5,  5,  6,  6,  6,  6,  7,  7,  7,  7,  8,  8,  8,  8,
+ 8,  8,  8,  8,  9,  9,  9,  9,  9,  9,  9,  9, 10, 10, 10, 10, 10, 10, 10, 10,
+10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
+11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12,
+12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13, 13, 13,
+13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
+13, 13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,  0,  0, 16, 17,
+18, 18, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22,
+23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29
+};
+
+local const uch length_code[MAX_MATCH-MIN_MATCH+1]= {
+ 0,  1,  2,  3,  4,  5,  6,  7,  8,  8,  9,  9, 10, 10, 11, 11, 12, 12, 12, 12,
+13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16,
+17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19,
+19, 19, 19, 19, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,
+21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22, 22,
+22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23,
+23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
+25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 28
+};
+
+local const int base_length[LENGTH_CODES] = {
+0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56,
+64, 80, 96, 112, 128, 160, 192, 224, 0
+};
+
+local const int base_dist[D_CODES] = {
+    0,     1,     2,     3,     4,     6,     8,    12,    16,    24,
+   32,    48,    64,    96,   128,   192,   256,   384,   512,   768,
+ 1024,  1536,  2048,  3072,  4096,  6144,  8192, 12288, 16384, 24576
+};
+

zconf.h

@@ -186,6 +186,7 @@ typedef uLong FAR uLongf;
 #endif
 
 #ifdef HAVE_UNISTD_H
+#  include <sys/types.h> /* for off_t */
 #  include <unistd.h>    /* for SEEK_* and off_t */
 #  define z_off_t  off_t
 #endif

zlib.3

@@ -1,4 +1,4 @@
-.TH ZLIB 3 "20 January 1998"
+.TH ZLIB 3 "26 January 1998"
 .SH NAME
 zlib \- compression/decompression library
 .SH SYNOPSIS
@@ -9,7 +9,7 @@ for full descripton]
 The
 .I zlib
 library is a general purpose data compression library.
-The code is reentrant (thread safe).
+The code is thread safe.
 It provides in-memory compression and decompression functions,
 including integrity checks of the uncompressed data.
 This version of the library supports only one compression method (deflation)
@@ -66,7 +66,7 @@ zlib@quest.jpl.nasa.gov
 or, if this fails, to the author addresses given below.
 The zlib home page is:
 .IP
-http://www.cdrom.com/infozip/zlib/
+http://www.cdrom.com/pub/infozip/zlib/
 .LP
 The data format used by the zlib library is described by RFC
 (Request for Comments) 1950 to 1952 in the files: 
@@ -81,7 +81,7 @@ These documents are also available in other formats from:
 .IP
 ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
 .SH AUTHORS
-Version 1.0.7.
+Version 1.0.8.
 Copyright (C) 1995-1998 Jean-loup Gailly (jloup@gzip.org)
 and Mark Adler (madler@alumni.caltech.edu).
 .LP

zlib.h

@@ -1,5 +1,5 @@
 /* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.0.7, Jan 20th, 1998
+  version 1.0.8, Jan 27th, 1998
 
   Copyright (C) 1995-1998 Jean-loup Gailly and Mark Adler
 
@@ -37,7 +37,7 @@ extern "C" {
 
 #include "zconf.h"
 
-#define ZLIB_VERSION "1.0.7"
+#define ZLIB_VERSION "1.0.8"
 
 /* 
      The 'zlib' compression library provides in-memory compression and
@@ -614,6 +614,21 @@ extern int EXPORT compress OF((Bytef *dest,   uLongf *destLen,
    buffer.
 */
 
+extern int EXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
+	 		        const Bytef *source, uLong sourceLen,
+				int level));
+/*
+     Compresses the source buffer into the destination buffer. The level
+   parameter has the same meaning as in deflateInit.  sourceLen is the byte
+   length of the source buffer. Upon entry, destLen is the total size of the
+   destination buffer, which must be at least 0.1% larger than sourceLen plus
+   12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+
+     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+   Z_STREAM_ERROR if the level parameter is invalid.
+*/
+
 extern int EXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
 				 const Bytef *source, uLong sourceLen));
 /*
@@ -844,7 +859,7 @@ extern int EXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
 
 extern const char   * EXPORT zError           OF((int err));
 extern int            EXPORT inflateSyncPoint OF((z_streamp z));
-extern uLongf *     EXPORT get_crc_table    OF((void));
+extern const uLongf * EXPORT get_crc_table    OF((void));
 
 #ifdef __cplusplus
 }

ztest28975.c

@@ -0,0 +1 @@
+int hello() {return 0;}

zutil.c

@@ -5,8 +5,6 @@
 
 /* @(#) $Id$ */
 
-#include <stdio.h>
-
 #include "zutil.h"
 
 struct internal_state      {int dummy;}; /* for buggy compilers */

zutil.h

@@ -110,8 +110,16 @@ extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
 #  define OS_CODE  0x05
 #endif
 
-#ifdef MACOS
+#if defined(MACOS) || defined(TARGET_OS_MAC)
 #  define OS_CODE  0x07
+#  ifndef fdopen
+#    define fdopen(fd,mode) NULL /* No fdopen() */
+#  endif
+#endif
+#if defined(__MWERKS__) && !defined(fdopen)
+#  if __dest_os != __be_os && __dest_os != __win32_os
+#    define fdopen(fd,mode) NULL
+#  endif
 #endif
 
 #ifdef __50SERIES /* Prime/PRIMOS */