zlib 1.1.1

ChangeLog

@@ -1,13 +1,171 @@
 
 		ChangeLog file for zlib
 
+Changes in 1.1.1 (27 Feb 98)
+- fix macros _tr_tally_* in deflate.h for debug mode  (Glenn Randers-Pehrson)
+- remove block truncation heuristic which had very marginal effect for zlib
+  (smaller lit_bufsize than in gzip 1.2.4) and degraded a little the
+  compression ratio on some files. This also allows inlining _tr_tally for
+  matches in deflate_slow.
+- added msdos/Makefile.w32 for WIN32 Microsoft Visual C++ (Bob Frazier)
+
+Changes in 1.1.0 (24 Feb 98)
+- do not return STREAM_END prematurely in inflate (John Bowler)
+- revert to the zlib 1.0.8 inflate to avoid the gcc 2.8.0 bug (Jeremy Buhler)
+- compile with -DFASTEST to get compression code optimized for speed only
+- in minigzip, try mmap'ing the input file first (Miguel Albrecht)
+- increase size of I/O buffers in minigzip.c and gzio.c (not a big gain
+  on Sun but significant on HP)
+
+- add a pointer to experimental unzip library in README (Gilles Vollant)
+- initialize variable gcc in configure (Chris Herborth)
+
+Changes in 1.0.9 (17 Feb 1998)
+- added gzputs and gzgets functions
+- do not clear eof flag in gzseek (Mark Diekhans)
+- fix gzseek for files in transparent mode (Mark Diekhans)
+- do not assume that vsprintf returns the number of bytes written (Jens Krinke)
+- replace EXPORT with ZEXPORT to avoid conflict with other programs
+- added compress2 in zconf.h, zlib.def, zlib.dnt
+- new asm code from Gilles Vollant in contrib/asm386
+- simplify the inflate code (Mark):
+ . Replace ZALLOC's in huft_build() with single ZALLOC in inflate_blocks_new()
+ . ZALLOC the length list in inflate_trees_fixed() instead of using stack
+ . ZALLOC the value area for huft_build() instead of using stack
+ . Simplify Z_FINISH check in inflate()
+
+- Avoid gcc 2.8.0 comparison bug a little differently than zlib 1.0.8
+- in inftrees.c, avoid cc -O bug on HP (Farshid Elahi)
+- in zconf.h move the ZLIB_DLL stuff earlier to avoid problems with
+  the declaration of FAR (Gilles VOllant)
+- install libz.so* with mode 755 (executable) instead of 644 (Marc Lehmann)
+- read_buf buf parameter of type Bytef* instead of charf*
+- zmemcpy parameters are of type Bytef*, not charf* (Joseph Strout)
+- do not redeclare unlink in minigzip.c for WIN32 (John Bowler)
+- fix check for presence of directories in "make install" (Ian Willis)
+
+Changes in 1.0.8 (27 Jan 1998)
+- fixed offsets in contrib/asm386/gvmat32.asm (Gilles Vollant)
+- fix gzgetc and gzputc for big endian systems (Markus Oberhumer)
+- added compress2() to allow setting the compression level
+- include sys/types.h to get off_t on some systems (Marc Lehmann & QingLong)
+- use constant arrays for the static trees in trees.c instead of computing
+  them at run time (thanks to Ken Raeburn for this suggestion). To create
+  trees.h, compile with GEN_TREES_H and run "make test".
+- check return code of example in "make test" and display result
+- pass minigzip command line options to file_compress
+- simplifying code of inflateSync to avoid gcc 2.8 bug
+
+- support CC="gcc -Wall" in configure -s (QingLong)
+- avoid a flush caused by ftell in gzopen for write mode (Ken Raeburn)
+- fix test for shared library support to avoid compiler warnings
+- zlib.lib -> zlib.dll in msdos/zlib.rc (Gilles Vollant)
+- check for TARGET_OS_MAC in addition to MACOS (Brad Pettit)
+- do not use fdopen for Metrowerks on Mac (Brad Pettit))
+- add checks for gzputc and gzputc in example.c
+- avoid warnings in gzio.c and deflate.c (Andreas Kleinert)
+- use const for the CRC table (Ken Raeburn)
+- fixed "make uninstall" for shared libraries
+- use Tracev instead of Trace in infblock.c
+- in example.c use correct compressed length for test_sync
+- suppress +vnocompatwarnings in configure for HPUX (not always supported)
+
+Changes in 1.0.7 (20 Jan 1998)
+- fix gzseek which was broken in write mode
+- return error for gzseek to negative absolute position
+- fix configure for Linux (Chun-Chung Chen)
+- increase stack space for MSC (Tim Wegner)
+- get_crc_table and inflateSyncPoint are EXPORTed (Gilles Vollant)
+- define EXPORTVA for gzprintf (Gilles Vollant)
+- added man page zlib.3 (Rick Rodgers)
+- for contrib/untgz, fix makedir() and improve Makefile
+
+- check gzseek in write mode in example.c
+- allocate extra buffer for seeks only if gzseek is actually called
+- avoid signed/unsigned comparisons (Tim Wegner, Gilles Vollant)
+- add inflateSyncPoint in zconf.h
+- fix list of exported functions in nt/zlib.dnt and mdsos/zlib.def
+
+Changes in 1.0.6 (19 Jan 1998)
+- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
+  gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
+- Fix a deflate bug occuring only with compression level 0 (thanks to
+  Andy Buckler for finding this one).
+- In minigzip, pass transparently also the first byte for .Z files.
+- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()
+- check Z_FINISH in inflate (thanks to Marc Schluper)
+- Implement deflateCopy (thanks to Adam Costello)
+- make static libraries by default in configure, add --shared option.
+- move MSDOS or Windows specific files to directory msdos
+- suppress the notion of partial flush to simplify the interface
+  (but the symbol Z_PARTIAL_FLUSH is kept for compatibility with 1.0.4)
+- suppress history buffer provided by application to simplify the interface
+  (this feature was not implemented anyway in 1.0.4)
+- next_in and avail_in must be initialized before calling inflateInit or
+  inflateInit2
+- add EXPORT in all exported functions (for Windows DLL)
+- added Makefile.nt (thanks to Stephen Williams)
+- added the unsupported "contrib" directory:
+   contrib/asm386/ by Gilles Vollant <info@winimage.com>
+	386 asm code replacing longest_match().
+   contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
+        A C++ I/O streams interface to the zlib gz* functions
+   contrib/iostream2/  by Tyge L<>vset <Tyge.Lovset@cmr.no>
+	Another C++ I/O streams interface
+   contrib/untgz/  by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+	A very simple tar.gz file extractor using zlib
+   contrib/visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
+        How to use compress(), uncompress() and the gz* functions from VB.
+- pass params -f (filtered data), -h (huffman only), -1 to -9 (compression
+  level) in minigzip (thanks to Tom Lane)
+
+- use const for rommable constants in deflate
+- added test for gzseek and gztell in example.c
+- add undocumented function inflateSyncPoint() (hack for Paul Mackerras)
+- add undocumented function zError to convert error code to string
+  (for Tim Smithers)
+- Allow compilation of gzio with -DNO_DEFLATE to avoid the compression code.
+- Use default memcpy for Symantec MSDOS compiler.
+- Add EXPORT keyword for check_func (needed for Windows DLL)
+- add current directory to LD_LIBRARY_PATH for "make test"
+- create also a link for libz.so.1
+- added support for FUJITSU UXP/DS (thanks to Toshiaki Nomura)
+- use $(SHAREDLIB) instead of libz.so in Makefile.in (for HPUX)
+- added -soname for Linux in configure (Chun-Chung Chen,
+- assign numbers to the exported functions in zlib.def (for Windows DLL)
+- add advice in zlib.h for best usage of deflateSetDictionary
+- work around compiler bug on Atari (cast Z_NULL in call of s->checkfn)
+- allow compilation with ANSI keywords only enabled for TurboC in large model
+- avoid "versionString"[0] (Borland bug)
+- add NEED_DUMMY_RETURN for Borland
+- use variable z_verbose for tracing in debug mode (Peter Deutsch).
+- allow compilation with CC
+- defined STDC for OS/2 (David Charlap)	
+- limit external names to 8 chars for MVS (Thomas Lund)
+- in minigzip.c, use static buffers only for 16-bit systems
+- fix suffix check for "minigzip -d foo.gz"
+- do not return an error for the 2nd of two consecutive gzflush() (Felix Lee)
+- use _fdopen instead of fdopen for MSC >= 6.0 (Thomas Fanslau)
+- added makelcc.bat for lcc-win32 (Tom St Denis)
+- in Makefile.dj2, use copy and del instead of install and rm (Frank Donahoe)
+- Avoid expanded $Id$. Use "rcs -kb" or "cvs admin -kb" to avoid Id expansion.
+- check for unistd.h in configure (for off_t)
+- remove useless check parameter in inflate_blocks_free
+- avoid useless assignment of s->check to itself in inflate_blocks_new
+- do not flush twice in gzclose (thanks to Ken Raeburn)
+- rename FOPEN as F_OPEN to avoid clash with /usr/include/sys/file.h
+- use NO_ERRNO_H instead of enumeration of operating systems with errno.h
+- work around buggy fclose on pipes for HP/UX
+- support zlib DLL with BORLAND C++ 5.0 (thanks to Glenn Randers-Pehrson)
+- fix configure if CC is already equal to gcc
+
 Changes in 1.0.5 (3 Jan 98)
 - Fix inflate to terminate gracefully when fed corrupted or invalid data
 - Use const for rommable constants in inflate
 - Eliminate memory leaks on error conditions in inflate
 - Removed some vestigial code in inflate
 - Update web address in README
-
+  
 Changes in 1.0.4 (24 Jul 96)
 - In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF
   bit, so the decompressor could decompress all the correct data but went

INDEX

@@ -1,22 +1,29 @@
-ChangeLog	history of changes
+ChangeLog		history of changes
-INDEX		this file
+INDEX			this file
-Make_vms.com	script for Vax/VMS
+Make_vms.com		script for Vax/VMS
-Makefile	makefile for Unix (generated by configure)
+Makefile		makefile for Unix (generated by configure)
-Makefile.b32	makefile for Borland C++   32-bit
+Makefile.in		makefile for Unix (template for configure)
-Makefile.bor	makefile for Borland C/C++ 16-bit
+Makefile.msc		makefile for Microsoft C 16-bit
-Makefile.dj2	makefile for DJGPP 2.x
+Makefile.riscos 	makefile for RISCOS
-Makefile.in	makefile for Unix (template for configure)
+Makefile.sas		makefile for Amiga SAS/C
-Makefile.msc	makefile for Microsoft C 16-bit
+README			guess what
-Makefile.riscos makefile for RISCOS
+algorithm.txt		description of the (de)compression algorithm
-Makefile.sas	makefile for Amiga SAS/C
+configure		configure script for Unix
-Makefile.tc	makefile for Turbo C
+descrip.mms		makefile for Vax/VMS
-Makefile.wat	makefile for Watcom C
+zlib.3			mini man page for zlib (volunteers to write full
-README		guess what
+			man pages from zlib.h welcome. write to jloup@gzip.org)
-algorithm.doc	description of the compression & decompression algorithms
+
-configure	configure script for Unix
+msdos/Makefile.w32      makefile for Microsoft Visual C++ 32-bit
-descrip.mms	makefile for Vax/VMS
+msdos/Makefile.b32	makefile for Borland C++   32-bit
-zlib.def        definition file for Windows DLL
+msdos/Makefile.bor	makefile for Borland C/C++ 16-bit
-zlib.rc         definition file for Windows DLL
+msdos/Makefile.dj2	makefile for DJGPP 2.x
+msdos/Makefile.tc	makefile for Turbo C
+msdos/Makefile.wat	makefile for Watcom C
+msdos/zlib.def        	definition file for Windows DLL
+msdos/zlib.rc         	definition file for Windows DLL
+
+nt/Makefile.nt		makefile for Windows NT
+nt/zlib.dnt		definition file for Windows NT DLL
 
 
 		zlib public header files (must be kept):
@@ -49,3 +56,20 @@ zutil.h
 		source files for sample programs:
 example.c
 minigzip.c
+
+		unsupported contribution by third parties
+
+contrib/asm386/ by Gilles Vollant <info@winimage.com>
+	386 asm code replacing longest_match().
+
+contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
+        A C++ I/O streams interface to the zlib gz* functions
+
+contrib/iostream2/  by Tyge L<>vset <Tyge.Lovset@cmr.no>
+	Another C++ I/O streams interface
+
+contrib/untgz/  by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+	A very simple tar.gz extractor using zlib
+
+contrib/visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
+        How to use compress(), uncompress() and the gz* functions from VB.

Makefile

@@ -5,6 +5,7 @@
 # To compile and test, type:
 #   ./configure; make test
 # The call of configure is optional if you don't have special requirements
+# If you wish to build zlib as a shared library, use: ./configure -s
 
 # To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
 #    make install
@@ -22,12 +23,14 @@ CFLAGS=-O
 LDFLAGS=-L. -lz
 LDSHARED=$(CC)
 
-VER=1.0.5
+VER=1.1.1
 LIBS=libz.a
+SHAREDLIB=libz.so
 
 AR=ar rc
 RANLIB=ranlib
 TAR=tar
+SHELL=/bin/sh
 
 prefix=/usr/local
 exec_prefix = $(prefix)
@@ -37,22 +40,35 @@ OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
 
 TEST_OBJS = example.o minigzip.o
 
-DISTFILES = README INDEX ChangeLog configure Make*[a-z0-9] descrip.mms \
+DISTFILES = README INDEX ChangeLog configure Make*[a-z0-9] *.[ch] descrip.mms \
-	    zlib.def zlib.rc algorithm.doc  *.[ch]
+  algorithm.txt zlib.3 msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \
+  nt/Makefile.nt nt/zlib.dnt  contrib/README.contrib contrib/*.txt \
+  contrib/asm386/*.asm contrib/asm386/*.c \
+  contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/iostream/*.cpp \
+  contrib/iostream/*.h  contrib/iostream2/*.h contrib/iostream2/*.cpp \
+  contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32
 
 all: example minigzip
 
 test: all
-	./example
+	@LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
-	echo hello world | ./minigzip | ./minigzip -d 
+	echo hello world | ./minigzip | ./minigzip -d || \
+	  echo '		*** minigzip test FAILED ***' ; \
+	if ./example; then \
+	  echo '		*** zlib test OK ***'; \
+	else \
+	  echo '		*** zlib test FAILED ***'; \
+	fi
 
 libz.a: $(OBJS)
 	$(AR) $@ $(OBJS)
-	-@ ($(RANLIB) $@ || true) 2>/dev/null
+	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
 
-libz.so.$(VER): $(OBJS)
+$(SHAREDLIB).$(VER): $(OBJS)
 	$(LDSHARED) -o $@ $(OBJS)
-	rm -f libz.so; ln -s $@ libz.so
+	rm -f $(SHAREDLIB) $(SHAREDLIB).1
+	ln -s $@ $(SHAREDLIB)
+	ln -s $@ $(SHAREDLIB).1
 
 example: example.o $(LIBS)
 	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
@@ -61,37 +77,49 @@ minigzip: minigzip.o $(LIBS)
 	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
 
 install: $(LIBS)
-	-@if [ ! $(prefix)/include  ]; then mkdir $(prefix)/include; fi
+	-@if [ ! -d $(prefix)/include  ]; then mkdir $(prefix)/include; fi
-	-@if [ ! $(exec_prefix)/lib ]; then mkdir $(exec_prefix)/lib; fi
+	-@if [ ! -d $(exec_prefix)/lib ]; then mkdir $(exec_prefix)/lib; fi
 	cp zlib.h zconf.h $(prefix)/include
 	chmod 644 $(prefix)/include/zlib.h $(prefix)/include/zconf.h
 	cp $(LIBS) $(exec_prefix)/lib
-	cd $(exec_prefix)/lib; chmod 644 $(LIBS)
+	cd $(exec_prefix)/lib; chmod 755 $(LIBS)
 	-@(cd $(exec_prefix)/lib; $(RANLIB) libz.a || true) >/dev/null 2>&1
-	cd $(exec_prefix)/lib; if test -f libz.so.$(VER); then \
+	cd $(exec_prefix)/lib; if test -f $(SHAREDLIB).$(VER); then \
-	  ln -s libz.so.$(VER) libz.so; \
+	  rm -f $(SHAREDLIB) $(SHAREDLIB).1; \
+	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB); \
+	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB).1; \
+	  (ldconfig || true)  >/dev/null 2>&1; \
 	fi
 # The ranlib in install is needed on NeXTSTEP which checks file times
+# ldconfig is for Linux
 
 uninstall:
-	cd $(exec_prefix)/lib; rm -f $(LIBS); \
+	cd $(prefix)/include; \
-	if test -f libz.so; then \
+	v=$(VER); \
-	 v=`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p'<$(prefix)/include/zlib.h`;\
+	if test -f zlib.h; then \
-	 rm -f libz.so.$$v libz.so; \
+	  v=`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`; \
+          rm -f zlib.h zconf.h; \
+	fi; \
+	cd $(exec_prefix)/lib; rm -f libz.a; \
+	if test -f $(SHAREDLIB).$$v; then \
+	  rm -f $(SHAREDLIB).$$v $(SHAREDLIB) $(SHAREDLIB).1; \
 	fi
-	cd $(prefix)/include; rm -f zlib.h zconf.h
 
 clean:
 	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz
 
+distclean:	clean
+
 zip:
 	mv Makefile Makefile~; cp -p Makefile.in Makefile
+	rm -f test.c ztest*.c
 	v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
 	zip -ul9 zlib$$v $(DISTFILES)
 	mv Makefile~ Makefile
 
 dist:
 	mv Makefile Makefile~; cp -p Makefile.in Makefile
+	rm -f test.c ztest*.c
 	d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
 	rm -f $$d.tar.gz; \
 	if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \
@@ -125,6 +153,6 @@ inflate.o: zutil.h zlib.h zconf.h infblock.h
 inftrees.o: zutil.h zlib.h zconf.h inftrees.h
 infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
 minigzip.o:  zlib.h zconf.h 
-trees.o: deflate.h zutil.h zlib.h zconf.h 
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
 uncompr.o: zlib.h zconf.h
 zutil.o: zutil.h zlib.h zconf.h  

Makefile.in

@@ -5,6 +5,7 @@
 # To compile and test, type:
 #   ./configure; make test
 # The call of configure is optional if you don't have special requirements
+# If you wish to build zlib as a shared library, use: ./configure -s
 
 # To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
 #    make install
@@ -22,12 +23,14 @@ CFLAGS=-O
 LDFLAGS=-L. -lz
 LDSHARED=$(CC)
 
-VER=1.0.5
+VER=1.1.1
 LIBS=libz.a
+SHAREDLIB=libz.so
 
 AR=ar rc
 RANLIB=ranlib
 TAR=tar
+SHELL=/bin/sh
 
 prefix=/usr/local
 exec_prefix = $(prefix)
@@ -37,22 +40,35 @@ OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
 
 TEST_OBJS = example.o minigzip.o
 
-DISTFILES = README INDEX ChangeLog configure Make*[a-z0-9] descrip.mms \
+DISTFILES = README INDEX ChangeLog configure Make*[a-z0-9] *.[ch] descrip.mms \
-	    zlib.def zlib.rc algorithm.doc  *.[ch]
+  algorithm.txt zlib.3 msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \
+  nt/Makefile.nt nt/zlib.dnt  contrib/README.contrib contrib/*.txt \
+  contrib/asm386/*.asm contrib/asm386/*.c \
+  contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/iostream/*.cpp \
+  contrib/iostream/*.h  contrib/iostream2/*.h contrib/iostream2/*.cpp \
+  contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32
 
 all: example minigzip
 
 test: all
-	./example
+	@LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
-	echo hello world | ./minigzip | ./minigzip -d 
+	echo hello world | ./minigzip | ./minigzip -d || \
+	  echo '		*** minigzip test FAILED ***' ; \
+	if ./example; then \
+	  echo '		*** zlib test OK ***'; \
+	else \
+	  echo '		*** zlib test FAILED ***'; \
+	fi
 
 libz.a: $(OBJS)
 	$(AR) $@ $(OBJS)
-	-@ ($(RANLIB) $@ || true) 2>/dev/null
+	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
 
-libz.so.$(VER): $(OBJS)
+$(SHAREDLIB).$(VER): $(OBJS)
 	$(LDSHARED) -o $@ $(OBJS)
-	rm -f libz.so; ln -s $@ libz.so
+	rm -f $(SHAREDLIB) $(SHAREDLIB).1
+	ln -s $@ $(SHAREDLIB)
+	ln -s $@ $(SHAREDLIB).1
 
 example: example.o $(LIBS)
 	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
@@ -61,37 +77,49 @@ minigzip: minigzip.o $(LIBS)
 	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
 
 install: $(LIBS)
-	-@if [ ! $(prefix)/include  ]; then mkdir $(prefix)/include; fi
+	-@if [ ! -d $(prefix)/include  ]; then mkdir $(prefix)/include; fi
-	-@if [ ! $(exec_prefix)/lib ]; then mkdir $(exec_prefix)/lib; fi
+	-@if [ ! -d $(exec_prefix)/lib ]; then mkdir $(exec_prefix)/lib; fi
 	cp zlib.h zconf.h $(prefix)/include
 	chmod 644 $(prefix)/include/zlib.h $(prefix)/include/zconf.h
 	cp $(LIBS) $(exec_prefix)/lib
-	cd $(exec_prefix)/lib; chmod 644 $(LIBS)
+	cd $(exec_prefix)/lib; chmod 755 $(LIBS)
 	-@(cd $(exec_prefix)/lib; $(RANLIB) libz.a || true) >/dev/null 2>&1
-	cd $(exec_prefix)/lib; if test -f libz.so.$(VER); then \
+	cd $(exec_prefix)/lib; if test -f $(SHAREDLIB).$(VER); then \
-	  ln -s libz.so.$(VER) libz.so; \
+	  rm -f $(SHAREDLIB) $(SHAREDLIB).1; \
+	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB); \
+	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB).1; \
+	  (ldconfig || true)  >/dev/null 2>&1; \
 	fi
 # The ranlib in install is needed on NeXTSTEP which checks file times
+# ldconfig is for Linux
 
 uninstall:
-	cd $(exec_prefix)/lib; rm -f $(LIBS); \
+	cd $(prefix)/include; \
-	if test -f libz.so; then \
+	v=$(VER); \
-	 v=`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p'<$(prefix)/include/zlib.h`;\
+	if test -f zlib.h; then \
-	 rm -f libz.so.$$v libz.so; \
+	  v=`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`; \
+          rm -f zlib.h zconf.h; \
+	fi; \
+	cd $(exec_prefix)/lib; rm -f libz.a; \
+	if test -f $(SHAREDLIB).$$v; then \
+	  rm -f $(SHAREDLIB).$$v $(SHAREDLIB) $(SHAREDLIB).1; \
 	fi
-	cd $(prefix)/include; rm -f zlib.h zconf.h
 
 clean:
 	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz
 
+distclean:	clean
+
 zip:
 	mv Makefile Makefile~; cp -p Makefile.in Makefile
+	rm -f test.c ztest*.c
 	v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
 	zip -ul9 zlib$$v $(DISTFILES)
 	mv Makefile~ Makefile
 
 dist:
 	mv Makefile Makefile~; cp -p Makefile.in Makefile
+	rm -f test.c ztest*.c
 	d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
 	rm -f $$d.tar.gz; \
 	if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \
@@ -125,6 +153,6 @@ inflate.o: zutil.h zlib.h zconf.h infblock.h
 inftrees.o: zutil.h zlib.h zconf.h inftrees.h
 infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
 minigzip.o:  zlib.h zconf.h 
-trees.o: deflate.h zutil.h zlib.h zconf.h 
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
 uncompr.o: zlib.h zconf.h
 zutil.o: zutil.h zlib.h zconf.h  

README

@@ -1,15 +1,16 @@
-zlib 1.0.5 is a general purpose data compression library.  All the code
+zlib 1.1.1 is a general purpose data compression library.  All the code
-is reentrant (thread safe).  The data format used by the zlib library
+is thread safe.  The data format used by the zlib library
 is described by RFCs (Request for Comments) 1950 to 1952 in the files 
 ftp://ds.internic.net/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate
 format) and rfc1952.txt (gzip format). These documents are also available in
 other formats from ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
 
-All functions of the compression library are documented in the file
+All functions of the compression library are documented in the file zlib.h
-zlib.h. A usage example of the library is given in the file example.c
+(volunteer to write man pages welcome, contact jloup@gzip.org). A usage
-which also tests that the library is working correctly. Another
+example of the library is given in the file example.c which also tests that
-example is given in the file minigzip.c. The compression library itself
+the library is working correctly. Another example is given in the file
-is composed of all source files except example.c and minigzip.c.
+minigzip.c. The compression library itself is composed of all source files
+except example.c and minigzip.c.
 
 To compile all files and run the test program, follow the instructions
 given at the top of Makefile. In short "make test; make install"
@@ -19,41 +20,71 @@ makefiles such as Makefile.msc; for VMS, use Make_vms.com or descrip.mms.
 Questions about zlib should be sent to <zlib@quest.jpl.nasa.gov> or,
 if this fails, to the addresses given below in the Copyright section.
 The zlib home page is http://www.cdrom.com/pub/infozip/zlib/
+The official zlib ftp site is ftp://ftp.cdrom.com/pub/infozip/zlib/
+Mark Nelson wrote an article about zlib for the Jan. 1997 issue of 
+Dr. Dobb's Journal; a copy of the article is available in
+http://web2.airmail.net/markn/articles/zlibtool/zlibtool.htm
 
-The changes made in version 1.0.5 are documented in the file ChangeLog.
+The changes made in version 1.1.1 are documented in the file ChangeLog.
-The main changes since 1.0.4 are:
+The main changes since 1.1.0 are:
 
-- Fix inflate to terminate gracefully when fed corrupted or invalid data
+- fix macros _tr_tally_* in deflate.h for debug mode  (Glenn Randers-Pehrson)
-- Use const for rommable constants in inflate
+- remove block truncation heuristic which had very marginal effect for zlib
+  (smaller lit_bufsize than in gzip 1.2.4) and degraded a little the
+  compression ratio on some files. This also allows inlining _tr_tally for
+  matches in deflate_slow.
 
 
+Unsupported third party contributions are provided in directory "contrib".
+
+A Java implementation of zlib is available in the Java Development Kit 1.1
+http://www.javasoft.com/products/JDK/1.1/docs/api/Package-java.util.zip.html
+See the zlib home page http://www.cdrom.com/pub/infozip/zlib/ for details.
+
 A Perl interface to zlib written by Paul Marquess <pmarquess@bfsec.bt.co.uk>
 is in the CPAN (Comprehensive Perl Archive Network) sites, such as:
 ftp://ftp.cis.ufl.edu/pub/perl/CPAN/modules/by-module/Compress/Compress-Zlib*
 
+A Python interface to zlib written by A.M. Kuchling <amk@magnet.com>
+is available from the Python Software Association sites, such as:
+ftp://ftp.python.org/pub/python/contrib/Encoding/zlib*.tar.gz
+
+An experimental package to read files in .zip format, written on top of
+zlib by Gilles Vollant <info@winimage.com>, is available at
+http://www.winimage.com/zLibDll/unzip.html
+
 
 Notes for some targets:
 
-- For Turbo C the small model is supported only with reduced performance to
+- To build a Windows DLL version, include in a DLL project zlib.def, zlib.rc
-  avoid any far allocation; it was tested with -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
+  and all .c files except example.c and minigzip.c; compile with -DZLIB_DLL
+  The zlib DLL support was initially done by Alessandro Iacopetti and is
+  now maintained by Gilles Vollant <info@winimage.com>. Check the zlib DLL
+  home page at http://www.winimage.com/zLibDll
 
-- For 64-bit Iris, deflate.c must be compiled without any optimization.
+  From Visual Basic, you can call the DLL functions which do not take
+  a structure as argument: compress, uncompress and all gz* functions.
+  See contrib/visual-basic.txt for more information.
+  I don't know how to handle structures in Visual Basic, sorry.
+
+- For 64-bit Irix, deflate.c must be compiled without any optimization.
   With -O, one libpng test fails. The test works in 32 bit mode (with
-  the -32 compiler flag). The compiler bug has been reported to SGI.
+  the -n32 compiler flag). The compiler bug has been reported to SGI.
 
 - zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1   
   it works when compiled with cc.
 
-- zlib doesn't work on HP-UX 9.05 with one cc compiler (the one not
+- zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works
-  accepting the -O option). It works with the other cc compiler.
+  with other compilers. Use "make test" to check your compiler.
 
-- To build a Windows DLL version, include in a DLL project zlib.def, zlib.rc
+- For shared memory multiprocessors, the decompression code assumes that
-  and all .c files except example.c and minigzip.c; compile with -DZLIB_DLL
+  writes to pointers are atomic. Also the functions zalloc and zfree passed
-  For help on building a zlib DLL, contact Alessandro Iacopetti
+  to deflateInit must be multi-threaded in this case.
-  <iaco@email.alessandria.alpcom.it>  http://lisa.unial.it/iaco ,
-  or contact Brad Clarke <bclarke@cyberus.ca>.
 
-- gzdopen is not supported on RISCOS
+- gzdopen is not supported on RISCOS, BEOS and by some Mac compilers.
+
+- For Turbo C the small model is supported only with reduced performance to
+  avoid any far allocation; it was tested with -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
 
 
 Acknowledgments:
@@ -84,7 +115,7 @@ Copyright notice:
   3. This notice may not be removed or altered from any source distribution.
 
   Jean-loup Gailly        Mark Adler
-  gzip@prep.ai.mit.edu    madler@alumni.caltech.edu
+  jloup@gzip.org          madler@alumni.caltech.edu
 
 If you use the zlib library in a product, we would appreciate *not*
 receiving lengthy legal documents to sign. The sources are provided

adler32.c

@@ -1,9 +1,9 @@
 /* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-1996 Mark Adler
+ * Copyright (C) 1995-1998 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
-/* $Id: adler32.c,v 1.10 1996/05/22 11:52:18 me Exp $ */
+/* @(#) $Id$ */
 
 #include "zlib.h"
 
@@ -18,7 +18,7 @@
 #define DO16(buf)   DO8(buf,0); DO8(buf,8);
 
 /* ========================================================================= */
-uLong adler32(adler, buf, len)
+uLong ZEXPORT adler32(adler, buf, len)
     uLong adler;
     const Bytef *buf;
     uInt len;

algorithm.txt

@@ -1,6 +1,6 @@
 1. Compression algorithm (deflate)
 
-The deflation algorithm used by zlib (also zip and gzip) is a variation of
+The deflation algorithm used by gzip (also zip and zlib) is a variation of
 LZ77 (Lempel-Ziv 1977, see reference below). It finds duplicated strings in
 the input data.  The second occurrence of a string is replaced by a
 pointer to the previous string, in the form of a pair (distance,
@@ -35,12 +35,12 @@ parameter of deflateInit). So deflate() does not always find the longest
 possible match but generally finds a match which is long enough.
 
 deflate() also defers the selection of matches with a lazy evaluation
-mechanism. After a match of length N has been found, deflate() searches for a
+mechanism. After a match of length N has been found, deflate() searches for
-longer match at the next input byte. If a longer match is found, the
+a longer match at the next input byte. If a longer match is found, the
 previous match is truncated to a length of one (thus producing a single
-literal byte) and the longer match is emitted afterwards.  Otherwise,
+literal byte) and the process of lazy evaluation begins again. Otherwise,
-the original match is kept, and the next match search is attempted only
+the original match is kept, and the next match search is attempted only N
-N steps later.
+steps later.
 
 The lazy match evaluation is also subject to a runtime parameter. If
 the current match is long enough, deflate() reduces the search for a longer
@@ -57,6 +57,8 @@ but saves time since there are both fewer insertions and fewer searches.
 
 2. Decompression algorithm (inflate)
 
+2.1 Introduction
+
 The real question is, given a Huffman tree, how to decode fast.  The most
 important realization is that shorter codes are much more common than
 longer codes, so pay attention to decoding the short codes fast, and let
@@ -91,8 +93,114 @@ interesting to see if optimizing the first level table for other
 applications gave values within a bit or two of the flat code size.
 
 
+2.2 More details on the inflate table lookup
+
+Ok, you want to know what this cleverly obfuscated inflate tree actually  
+looks like.  You are correct that it's not a Huffman tree.  It is simply a  
+lookup table for the first, let's say, nine bits of a Huffman symbol.  The  
+symbol could be as short as one bit or as long as 15 bits.  If a particular  
+symbol is shorter than nine bits, then that symbol's translation is duplicated
+in all those entries that start with that symbol's bits.  For example, if the  
+symbol is four bits, then it's duplicated 32 times in a nine-bit table.  If a  
+symbol is nine bits long, it appears in the table once.
+
+If the symbol is longer than nine bits, then that entry in the table points  
+to another similar table for the remaining bits.  Again, there are duplicated  
+entries as needed.  The idea is that most of the time the symbol will be short
+and there will only be one table look up.  (That's whole idea behind data  
+compression in the first place.)  For the less frequent long symbols, there  
+will be two lookups.  If you had a compression method with really long  
+symbols, you could have as many levels of lookups as is efficient.  For  
+inflate, two is enough.
+
+So a table entry either points to another table (in which case nine bits in  
+the above example are gobbled), or it contains the translation for the symbol  
+and the number of bits to gobble.  Then you start again with the next  
+ungobbled bit.
+
+You may wonder: why not just have one lookup table for how ever many bits the  
+longest symbol is?  The reason is that if you do that, you end up spending  
+more time filling in duplicate symbol entries than you do actually decoding.   
+At least for deflate's output that generates new trees every several 10's of  
+kbytes.  You can imagine that filling in a 2^15 entry table for a 15-bit code  
+would take too long if you're only decoding several thousand symbols.  At the  
+other extreme, you could make a new table for every bit in the code.  In fact,
+that's essentially a Huffman tree.  But then you spend two much time  
+traversing the tree while decoding, even for short symbols.
+
+So the number of bits for the first lookup table is a trade of the time to  
+fill out the table vs. the time spent looking at the second level and above of
+the table.
+
+Here is an example, scaled down:
+
+The code being decoded, with 10 symbols, from 1 to 6 bits long:
+
+A: 0
+B: 10
+C: 1100
+D: 11010
+E: 11011
+F: 11100
+G: 11101
+H: 11110
+I: 111110
+J: 111111
+
+Let's make the first table three bits long (eight entries):
+
+000: A,1
+001: A,1
+010: A,1
+011: A,1
+100: B,2
+101: B,2
+110: -> table X (gobble 3 bits)
+111: -> table Y (gobble 3 bits)
+
+Each entry is what the bits decode to and how many bits that is, i.e. how  
+many bits to gobble.  Or the entry points to another table, with the number of
+bits to gobble implicit in the size of the table.
+
+Table X is two bits long since the longest code starting with 110 is five bits
+long:
+
+00: C,1
+01: C,1
+10: D,2
+11: E,2
+
+Table Y is three bits long since the longest code starting with 111 is six  
+bits long:
+
+000: F,2
+001: F,2
+010: G,2
+011: G,2
+100: H,2
+101: H,2
+110: I,3
+111: J,3
+
+So what we have here are three tables with a total of 20 entries that had to  
+be constructed.  That's compared to 64 entries for a single table.  Or  
+compared to 16 entries for a Huffman tree (six two entry tables and one four  
+entry table).  Assuming that the code ideally represents the probability of  
+the symbols, it takes on the average 1.25 lookups per symbol.  That's compared
+to one lookup for the single table, or 1.66 lookups per symbol for the  
+Huffman tree.
+
+There, I think that gives you a picture of what's going on.  For inflate, the  
+meaning of a particular symbol is often more than just a letter.  It can be a  
+byte (a "literal"), or it can be either a length or a distance which  
+indicates a base value and a number of bits to fetch after the code that is  
+added to the base value.  Or it might be the special end-of-block code.  The  
+data structures created in inftrees.c try to encode all that information  
+compactly in the tables.
+
+
 Jean-loup Gailly        Mark Adler
-gzip@prep.ai.mit.edu    madler@alumni.caltech.edu
+jloup@gzip.org          madler@alumni.caltech.edu
 
 
 References:

compress.c

@@ -1,29 +1,29 @@
 /* compress.c -- compress a memory buffer
- * Copyright (C) 1995-1996 Jean-loup Gailly.
+ * Copyright (C) 1995-1998 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
-/* $Id: compress.c,v 1.10 1996/05/23 16:51:12 me Exp $ */
+/* @(#) $Id$ */
 
 #include "zlib.h"
 
 /* ===========================================================================
-     Compresses the source buffer into the destination buffer.  sourceLen is
+     Compresses the source buffer into the destination buffer. The level
-   the byte length of the source buffer. Upon entry, destLen is the total
+   parameter has the same meaning as in deflateInit.  sourceLen is the byte
-   size of the destination buffer, which must be at least 0.1% larger than
+   length of the source buffer. Upon entry, destLen is the total size of the
-   sourceLen plus 8 bytes. Upon exit, destLen is the actual size of the
+   destination buffer, which must be at least 0.1% larger than sourceLen plus
-   compressed buffer.
+   12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
-     This function can be used to compress a whole file at once if the
+
-   input file is mmap'ed.
+     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
-     compress returns Z_OK if success, Z_MEM_ERROR if there was not
+   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
-   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   Z_STREAM_ERROR if the level parameter is invalid.
-   buffer.
 */
-int compress (dest, destLen, source, sourceLen)
+int ZEXPORT compress2 (dest, destLen, source, sourceLen, level)
     Bytef *dest;
     uLongf *destLen;
     const Bytef *source;
     uLong sourceLen;
+    int level;
 {
     z_stream stream;
     int err;
@@ -42,7 +42,7 @@ int compress (dest, destLen, source, sourceLen)
     stream.zfree = (free_func)0;
     stream.opaque = (voidpf)0;
 
-    err = deflateInit(&stream, Z_DEFAULT_COMPRESSION);
+    err = deflateInit(&stream, level);
     if (err != Z_OK) return err;
 
     err = deflate(&stream, Z_FINISH);
@@ -55,3 +55,14 @@ int compress (dest, destLen, source, sourceLen)
     err = deflateEnd(&stream);
     return err;
 }
+
+/* ===========================================================================
+ */
+int ZEXPORT compress (dest, destLen, source, sourceLen)
+    Bytef *dest;
+    uLongf *destLen;
+    const Bytef *source;
+    uLong sourceLen;
+{
+    return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION);
+}

configure

@@ -4,29 +4,59 @@
 # of if you need special compiler, flags or install directory.
 # Otherwise, you can just use directly "make test; make install"
 #
+# To create a shared library, use "configure --shared"; by default a static
+# library is created. If the primitive shared library support provided here
+# does not work, use ftp://prep.ai.mit.edu/pub/gnu/libtool-*.tar.gz
+#
 # To impose specific compiler or flags or install directory, use for example:
 #    prefix=$HOME CC=cc CFLAGS="-O4" ./configure
 # or for csh/tcsh users:
 #    (setenv prefix $HOME; setenv CC cc; setenv CFLAGS "-O4"; ./configure)
 # LDSHARED is the command to be used to create a shared library
 
+# Incorrect settings of CC or CFLAGS may prevent creating a shared library.
+# If you have problems, try without defining CC and CFLAGS before reporting
+# an error.
+
 LIBS=libz.a
+SHAREDLIB=libz.so
 VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`
 AR=${AR-"ar rc"}
 RANLIB=${RANLIB-"ranlib"}
 prefix=${prefix-/usr/local}
 exec_prefix=${exec_prefix-$prefix}
+shared_ext='.so'
+shared=0
+gcc=0
+old_cc="$CC"
+old_cflags="$CFLAGS"
+
+case "$1" in
+  -s* | --s*) shared=1; shift;;
+  -h* | --h*) echo 'syntax: configure [ --shared ]'; exit 0;;
+esac
 
-test -z "$CC" && echo Checking for gcc...
 test=ztest$$
 cat > $test.c <<EOF
-int hello() { printf("hello\n"); }
+extern int getchar();
+int hello() {return getchar();}
 EOF
-if test -z "$CC" && (gcc -c -O3 $test.c) 2>/dev/null; then
+
-  CC=gcc
+test -z "$CC" && echo Checking for gcc...
+cc=${CC-gcc}
+cflags=${CFLAGS-"-O3"}
+case "$cc" in
+  *gcc*) gcc=1;;
+esac
+
+if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
+  CC="$cc"
   SFLAGS=${CFLAGS-"-fPIC -O3"}
-  CFLAGS=${CFLAGS-"-O3"}
+  CFLAGS="$cflags"
-  LDSHARED=${LDSHARED-"gcc -shared"}
+  case `(uname -s || echo unknown) 2>/dev/null` in
+  Linux | linux) LDSHARED=${LDSHARED-"gcc -shared -Wl,-soname,libz.so.1"};;
+  *)             LDSHARED=${LDSHARED-"gcc -shared"};;
+  esac
 else
   # find system name and corresponding cc options
   CC=${CC-cc}
@@ -50,37 +80,77 @@ else
 	     LDSHARED=${LDSHARED-"cc -dy -KPIC -G"};;
   HP-UX*)    SFLAGS=${CFLAGS-"-O +z"}
 	     CFLAGS=${CFLAGS-"-O"}
+#	     LDSHARED=${LDSHARED-"ld -b +vnocompatwarnings"}
 	     LDSHARED=${LDSHARED-"ld -b"}
-	     SHAREDLIBS='libz.sl';;
+	     shared_ext='.sl'
-  # send working options for other systems to gzip@prep.ai.mit.edu
+	     SHAREDLIB='libz.sl';;
+  UNIX_System_V\ 4.2.0) 
+	     SFLAGS=${CFLAGS-"-KPIC -O"}
+	     CFLAGS=${CFLAGS-"-O"}
+	     LDSHARED=${LDSHARED-"cc -G"};;
+  # send working options for other systems to support@gzip.org
   *)         SFLAGS=${CFLAGS-"-O"}
 	     CFLAGS=${CFLAGS-"-O"}
 	     LDSHARED=${LDSHARED-"cc -shared"};;
   esac
 fi
 
-echo Checking for shared library support...
+if test $shared -eq 1; then
-# we must test in two steps (cc then ld), required at least on SunOS 4.x
+  echo Checking for shared library support...
-if test "`($CC -c $SFLAGS $test.c) 2>&1`" = "" &&
+  # we must test in two steps (cc then ld), required at least on SunOS 4.x
-   test "`($LDSHARED -o $test.so $test.o) 2>&1`" = ""; then
+  if test "`($CC -c $SFLAGS $test.c) 2>&1`" = "" &&
-  CFLAGS="$SFLAGS"
+     test "`($LDSHARED -o $test$shared_ext $test.o) 2>&1`" = ""; then
-  LIBS='libz.so.$(VER)'
+    CFLAGS="$SFLAGS"
-  echo Building shared library libz.so.$VER with $CC.
+    LIBS="$SHAREDLIB.$VER"
-else
+    echo Building shared library $SHAREDLIB.$VER with $CC.
+  elif test -z "$old_cc" -a -z "$old_cflags"; then
+    echo No shared library suppport.
+    shared=0;
+  else
+    echo 'No shared library suppport; try without defining CC and CFLAGS'
+    shared=0;
+  fi
+fi
+if test $shared -eq 0; then
   LDSHARED="$CC"
   echo Building static library $LIBS version $VER with $CC.
 fi
-rm -f $test.[co] $test.so
+
+if test -f /usr/include/unistd.h; then
+  CFLAGS="$CFLAGS -DHAVE_UNISTD_H"
+fi
+
+if test ! -f /usr/include/errno.h; then
+  CFLAGS="$CFLAGS -DNO_ERRNO_H"
+fi
+
+cat > $test.c <<EOF
+#include <sys/types.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+caddr_t hello() {
+  return mmap((caddr_t)0, (off_t)0, PROT_READ, MAP_SHARED, 0, (off_t)0); 
+}
+EOF
+if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+  CFLAGS="$CFLAGS -DUSE_MMAP"
+  echo Checking for mmap support... Yes.
+else
+  echo Checking for mmap support... No.
+fi
+
+rm -f $test.[co] $test$shared_ext
 
 # udpate Makefile
 sed < Makefile.in "
-/^CC *=/s/=.*/=$CC/
+/^CC *=/s%=.*%=$CC%
-/^CFLAGS *=/s/=.*/=$CFLAGS/
+/^CFLAGS *=/s%=.*%=$CFLAGS%
-/^LDSHARED *=/s/=.*/=$LDSHARED/
+/^LDSHARED *=/s%=.*%=$LDSHARED%
-/^LIBS *=/s,=.*,=$LIBS,
+/^LIBS *=/s%=.*%=$LIBS%
-/^AR *=/s/=.*/=$AR/
+/^SHAREDLIB *=/s%=.*%=$SHAREDLIB%
-/^RANLIB *=/s,=.*,=$RANLIB,
+/^AR *=/s%=.*%=$AR%
-/^VER *=/s/=.*/=$VER/
+/^RANLIB *=/s%=.*%=$RANLIB%
-/^prefix *=/s,=.*,=$prefix,
+/^VER *=/s%=.*%=$VER%
-/^exec_prefix *=/s,=.*,=$exec_prefix,
+/^prefix *=/s%=.*%=$prefix%
+/^exec_prefix *=/s%=.*%=$exec_prefix%
 " > Makefile

contrib/README.contrib

@@ -0,0 +1,20 @@
+All files under this contrib directory are UNSUPPORTED. There were
+provided by users of zlib and were not tested by the authors of zlib.
+Use at your own risk. Please contact the authors of the contributions
+for help about these, not the zlib authors. Thanks.
+
+
+asm386/     by Gilles Vollant <info@winimage.com>
+	386 asm code replacing longest_match(), for Visual C++ 4.2 and ML 6.11c
+
+iostream/   by Kevin Ruland <kevin@rodin.wustl.edu>
+        A C++ I/O streams interface to the zlib gz* functions
+
+iostream2/  by Tyge L<>vset <Tyge.Lovset@cmr.no>
+	Another C++ I/O streams interface
+
+untgz/      by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+	A very simple tar.gz file extractor using zlib
+
+visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
+        How to use compress(), uncompress() and the gz* functions from VB.

contrib/asm386/gvmat32.asm

@@ -0,0 +1,559 @@
+;
+; gvmat32.asm -- Asm portion of the optimized longest_match for 32 bits x86
+; Copyright (C) 1995-1996 Jean-loup Gailly and Gilles Vollant.
+; File written by Gilles Vollant, by modifiying the longest_match
+;  from Jean-loup Gailly in deflate.c
+; It need wmask == 0x7fff
+;     (assembly code is faster with a fixed wmask)
+;
+; For Visual C++ 4.2 and ML 6.11c (version in directory \MASM611C of Win95 DDK)
+;   I compile with : "ml /coff /Zi /c gvmat32.asm"
+;
+
+;uInt longest_match_7fff(s, cur_match)
+;    deflate_state *s;
+;    IPos cur_match;                             /* current match */
+
+        NbStack         equ     76
+        cur_match       equ     dword ptr[esp+NbStack-0]
+        str_s           equ     dword ptr[esp+NbStack-4]
+; 5 dword on top (ret,ebp,esi,edi,ebx)
+        adrret          equ     dword ptr[esp+NbStack-8]
+        pushebp         equ     dword ptr[esp+NbStack-12]
+        pushedi         equ     dword ptr[esp+NbStack-16]
+        pushesi         equ     dword ptr[esp+NbStack-20]
+        pushebx         equ     dword ptr[esp+NbStack-24]
+
+        chain_length    equ     dword ptr [esp+NbStack-28]
+        limit           equ     dword ptr [esp+NbStack-32]
+        best_len        equ     dword ptr [esp+NbStack-36]
+        window          equ     dword ptr [esp+NbStack-40]
+        prev            equ     dword ptr [esp+NbStack-44]
+        scan_start      equ      word ptr [esp+NbStack-48]
+        wmask           equ     dword ptr [esp+NbStack-52]
+        match_start_ptr equ     dword ptr [esp+NbStack-56]
+        nice_match      equ     dword ptr [esp+NbStack-60]
+        scan            equ     dword ptr [esp+NbStack-64]
+
+        windowlen       equ     dword ptr [esp+NbStack-68]
+        match_start     equ     dword ptr [esp+NbStack-72]
+        strend          equ     dword ptr [esp+NbStack-76]
+        NbStackAdd      equ     (NbStack-24)
+
+    .386p
+
+    name    gvmatch
+    .MODEL  FLAT
+
+
+
+;  all the +4 offsets are due to the addition of pending_buf_size (in zlib
+;  in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, remove the +4).
+;  Note : these value are good with a 8 bytes boundary pack structure
+    dep_chain_length    equ     70h+4
+    dep_window          equ     2ch+4
+    dep_strstart        equ     60h+4
+    dep_prev_length     equ     6ch+4
+    dep_nice_match      equ     84h+4
+    dep_w_size          equ     20h+4
+    dep_prev            equ     34h+4
+    dep_w_mask          equ     28h+4
+    dep_good_match      equ     80h+4
+    dep_match_start     equ     64h+4
+    dep_lookahead       equ     68h+4
+
+
+_TEXT                   segment
+
+IFDEF NOUNDERLINE
+                        public  longest_match_7fff
+;                        public  match_init
+ELSE
+                        public  _longest_match_7fff
+;                        public  _match_init
+ENDIF
+
+    MAX_MATCH           equ     258
+    MIN_MATCH           equ     3
+    MIN_LOOKAHEAD       equ     (MAX_MATCH+MIN_MATCH+1)
+
+
+
+IFDEF NOUNDERLINE
+;match_init      proc near
+;                ret
+;match_init      endp
+ELSE
+;_match_init     proc near
+;                ret
+;_match_init     endp
+ENDIF
+
+
+IFDEF NOUNDERLINE
+longest_match_7fff   proc near
+ELSE
+_longest_match_7fff  proc near
+ENDIF
+
+        mov     edx,[esp+4]
+
+
+
+        push    ebp
+        push    edi
+        push    esi
+        push    ebx
+
+        sub     esp,NbStackAdd
+
+; initialize or check the variables used in match.asm.
+        mov     ebp,edx
+
+; chain_length = s->max_chain_length
+; if (prev_length>=good_match) chain_length >>= 2
+        mov     edx,[ebp+dep_chain_length]
+        mov     ebx,[ebp+dep_prev_length]
+        cmp     [ebp+dep_good_match],ebx
+        ja      noshr
+        shr     edx,2
+noshr:
+; we increment chain_length because in the asm, the --chain_lenght is in the beginning of the loop
+        inc     edx
+        mov     edi,[ebp+dep_nice_match]
+        mov     chain_length,edx
+        mov     eax,[ebp+dep_lookahead]
+        cmp     eax,edi
+; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+        jae     nolookaheadnicematch
+        mov     edi,eax
+nolookaheadnicematch:
+; best_len = s->prev_length
+        mov     best_len,ebx
+
+; window = s->window
+        mov     esi,[ebp+dep_window]
+        mov     ecx,[ebp+dep_strstart]
+        mov     window,esi
+
+        mov     nice_match,edi
+; scan = window + strstart
+        add     esi,ecx
+        mov     scan,esi
+; dx = *window
+        mov     dx,word ptr [esi]
+; bx = *(window+best_len-1)
+        mov     bx,word ptr [esi+ebx-1]
+        add     esi,MAX_MATCH-1
+; scan_start = *scan
+        mov     scan_start,dx
+; strend = scan + MAX_MATCH-1
+        mov     strend,esi
+; bx = scan_end = *(window+best_len-1)
+
+;    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+;        s->strstart - (IPos)MAX_DIST(s) : NIL;
+
+        mov     esi,[ebp+dep_w_size]
+        sub     esi,MIN_LOOKAHEAD
+; here esi = MAX_DIST(s)
+        sub     ecx,esi
+        ja      nodist
+        xor     ecx,ecx
+nodist:
+        mov     limit,ecx
+
+; prev = s->prev
+        mov     edx,[ebp+dep_prev]
+        mov     prev,edx
+
+;
+        mov     edx,dword ptr [ebp+dep_match_start]
+        mov     bp,scan_start
+        mov     eax,cur_match
+        mov     match_start,edx
+
+        mov     edx,window
+        mov     edi,edx
+        add     edi,best_len
+        mov     esi,prev
+        dec     edi
+; windowlen = window + best_len -1
+        mov     windowlen,edi
+
+        jmp     beginloop2
+        align   4
+
+; here, in the loop
+;       eax = ax = cur_match
+;       ecx = limit
+;        bx = scan_end
+;        bp = scan_start
+;       edi = windowlen (window + best_len -1)
+;       esi = prev
+
+
+;// here; chain_length <=16
+normalbeg0add16:
+        add     chain_length,16
+        jz      exitloop
+normalbeg0:
+        cmp     word ptr[edi+eax],bx
+        je      normalbeg2noroll
+rcontlabnoroll:
+; cur_match = prev[cur_match & wmask]
+        and     eax,7fffh
+        mov     ax,word ptr[esi+eax*2]
+; if cur_match > limit, go to exitloop
+        cmp     ecx,eax
+        jnb     exitloop
+; if --chain_length != 0, go to exitloop
+        dec     chain_length
+        jnz     normalbeg0
+        jmp     exitloop
+
+normalbeg2noroll:
+; if (scan_start==*(cur_match+window)) goto normalbeg2
+        cmp     bp,word ptr[edx+eax]
+        jne     rcontlabnoroll
+        jmp     normalbeg2
+
+contloop3:
+        mov     edi,windowlen
+
+; cur_match = prev[cur_match & wmask]
+        and     eax,7fffh
+        mov     ax,word ptr[esi+eax*2]
+; if cur_match > limit, go to exitloop
+        cmp     ecx,eax
+jnbexitloopshort1:
+        jnb     exitloop
+; if --chain_length != 0, go to exitloop
+
+
+; begin the main loop
+beginloop2:
+        sub     chain_length,16+1
+; if chain_length <=16, don't use the unrolled loop
+        jna     normalbeg0add16
+
+do16:
+        cmp     word ptr[edi+eax],bx
+        je      normalbeg2dc0
+
+maccn   MACRO   lab
+        and     eax,7fffh
+        mov     ax,word ptr[esi+eax*2]
+        cmp     ecx,eax
+        jnb     exitloop
+        cmp     word ptr[edi+eax],bx
+        je      lab
+        ENDM
+
+rcontloop0:
+        maccn   normalbeg2dc1
+
+rcontloop1:
+        maccn   normalbeg2dc2
+
+rcontloop2:
+        maccn   normalbeg2dc3
+
+rcontloop3:
+        maccn   normalbeg2dc4
+
+rcontloop4:
+        maccn   normalbeg2dc5
+
+rcontloop5:
+        maccn   normalbeg2dc6
+
+rcontloop6:
+        maccn   normalbeg2dc7
+
+rcontloop7:
+        maccn   normalbeg2dc8
+
+rcontloop8:
+        maccn   normalbeg2dc9
+
+rcontloop9:
+        maccn   normalbeg2dc10
+
+rcontloop10:
+        maccn   short normalbeg2dc11
+
+rcontloop11:
+        maccn   short normalbeg2dc12
+
+rcontloop12:
+        maccn   short normalbeg2dc13
+
+rcontloop13:
+        maccn   short normalbeg2dc14
+
+rcontloop14:
+        maccn   short normalbeg2dc15
+
+rcontloop15:
+        and     eax,7fffh
+        mov     ax,word ptr[esi+eax*2]
+        cmp     ecx,eax
+        jnb     exitloop
+
+        sub     chain_length,16
+        ja      do16
+        jmp     normalbeg0add16
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+normbeg MACRO   rcontlab,valsub
+; if we are here, we know that *(match+best_len-1) == scan_end
+        cmp     bp,word ptr[edx+eax]
+; if (match != scan_start) goto rcontlab
+        jne     rcontlab
+; calculate the good chain_length, and we'll compare scan and match string
+        add     chain_length,16-valsub
+        jmp     iseq
+        ENDM
+
+
+normalbeg2dc11:
+        normbeg rcontloop11,11
+
+normalbeg2dc12:
+        normbeg short rcontloop12,12
+
+normalbeg2dc13:
+        normbeg short rcontloop13,13
+
+normalbeg2dc14:
+        normbeg short rcontloop14,14
+
+normalbeg2dc15:
+        normbeg short rcontloop15,15
+
+normalbeg2dc10:
+        normbeg rcontloop10,10
+
+normalbeg2dc9:
+        normbeg rcontloop9,9
+
+normalbeg2dc8:
+        normbeg rcontloop8,8
+
+normalbeg2dc7:
+        normbeg rcontloop7,7
+
+normalbeg2dc6:
+        normbeg rcontloop6,6
+
+normalbeg2dc5:
+        normbeg rcontloop5,5
+
+normalbeg2dc4:
+        normbeg rcontloop4,4
+
+normalbeg2dc3:
+        normbeg rcontloop3,3
+
+normalbeg2dc2:
+        normbeg rcontloop2,2
+
+normalbeg2dc1:
+        normbeg rcontloop1,1
+
+normalbeg2dc0:
+        normbeg rcontloop0,0
+
+
+; we go in normalbeg2 because *(ushf*)(match+best_len-1) == scan_end
+
+normalbeg2:
+        mov     edi,window
+
+        cmp     bp,word ptr[edi+eax]
+        jne     contloop3                   ; if *(ushf*)match != scan_start, continue
+
+iseq:
+; if we are here, we know that *(match+best_len-1) == scan_end
+; and (match == scan_start)
+
+        mov     edi,edx
+        mov     esi,scan                    ; esi = scan
+        add     edi,eax                     ; edi = window + cur_match = match
+
+        mov     edx,[esi+3]                 ; compare manually dword at match+3
+        xor     edx,[edi+3]                 ; and scan +3
+
+        jz      begincompare                ; if equal, go to long compare
+
+; we will determine the unmatch byte and calculate len (in esi)
+        or      dl,dl
+        je      eq1rr
+        mov     esi,3
+        jmp     trfinval
+eq1rr:
+        or      dx,dx
+        je      eq1
+
+        mov     esi,4
+        jmp     trfinval
+eq1:
+        and     edx,0ffffffh
+        jz      eq11
+        mov     esi,5
+        jmp     trfinval
+eq11:
+        mov     esi,6
+        jmp     trfinval
+
+begincompare:
+        ; here we now scan and match begin same
+        add     edi,6
+        add     esi,6
+        mov     ecx,(MAX_MATCH-(2+4))/4     ; scan for at most MAX_MATCH bytes
+        repe    cmpsd                       ; loop until mismatch
+
+        je      trfin                       ; go to trfin if not unmatch
+; we determine the unmatch byte
+        sub     esi,4
+        mov     edx,[edi-4]
+        xor     edx,[esi]
+
+        or      dl,dl
+        jnz     trfin
+        inc     esi
+
+        or      dx,dx
+        jnz     trfin
+        inc     esi
+
+        and     edx,0ffffffh
+        jnz     trfin
+        inc     esi
+
+trfin:
+        sub     esi,scan          ; esi = len
+trfinval:
+; here we have finised compare, and esi contain len of equal string
+        cmp     esi,best_len        ; if len > best_len, go newbestlen
+        ja      short newbestlen
+; now we restore edx, ecx and esi, for the big loop
+        mov     esi,prev
+        mov     ecx,limit
+        mov     edx,window
+        jmp     contloop3
+
+newbestlen:
+        mov     best_len,esi        ; len become best_len
+
+        mov     match_start,eax     ; save new position as match_start
+        cmp     esi,nice_match      ; if best_len >= nice_match, exit
+        jae     exitloop
+        mov     ecx,scan
+        mov     edx,window          ; restore edx=window
+        add     ecx,esi
+        add     esi,edx
+
+        dec     esi
+        mov     windowlen,esi       ; windowlen = window + best_len-1
+        mov     bx,[ecx-1]          ; bx = *(scan+best_len-1) = scan_end
+
+; now we restore ecx and esi, for the big loop :
+        mov     esi,prev
+        mov     ecx,limit
+        jmp     contloop3
+
+exitloop:
+; exit : s->match_start=match_start
+        mov     ebx,match_start
+        mov     ebp,str_s
+        mov     ecx,best_len
+        mov     dword ptr [ebp+dep_match_start],ebx        
+        mov     eax,dword ptr [ebp+dep_lookahead]
+        cmp     ecx,eax
+        ja      minexlo
+        mov     eax,ecx
+minexlo:
+; return min(best_len,s->lookahead)
+        
+; restore stack and register ebx,esi,edi,ebp
+        add     esp,NbStackAdd
+
+        pop     ebx
+        pop     esi
+        pop     edi
+        pop     ebp
+        ret
+InfoAuthor:
+; please don't remove this string !
+; Your are free use gvmat32 in any fre or commercial apps if you don't remove the string in the binary!
+        db     0dh,0ah,"GVMat32 optimised assembly code written 1996-98 by Gilles Vollant",0dh,0ah
+
+
+
+IFDEF NOUNDERLINE
+longest_match_7fff   endp
+ELSE
+_longest_match_7fff  endp
+ENDIF
+
+
+IFDEF NOUNDERLINE
+cpudetect32     proc near
+ELSE
+_cpudetect32    proc near
+ENDIF
+
+
+	pushfd                  ; push original EFLAGS
+	pop     eax             ; get original EFLAGS
+	mov     ecx, eax        ; save original EFLAGS
+	xor     eax, 40000h     ; flip AC bit in EFLAGS
+	push    eax             ; save new EFLAGS value on stack
+	popfd                   ; replace current EFLAGS value
+	pushfd                  ; get new EFLAGS
+	pop     eax             ; store new EFLAGS in EAX
+	xor     eax, ecx        ; can<61>t toggle AC bit, processor=80386
+	jz      end_cpu_is_386  ; jump if 80386 processor
+	push    ecx
+	popfd                   ; restore AC bit in EFLAGS first
+
+	pushfd
+	pushfd
+	pop     ecx
+			
+	mov     eax, ecx        ; get original EFLAGS
+	xor     eax, 200000h    ; flip ID bit in EFLAGS
+	push    eax             ; save new EFLAGS value on stack
+	popfd                   ; replace current EFLAGS value
+	pushfd                  ; get new EFLAGS
+	pop		eax	            ; store new EFLAGS in EAX
+	popfd                   ; restore original EFLAGS
+	xor		eax, ecx        ; can<61>t toggle ID bit,
+	je		is_old_486		; processor=old
+
+	mov     eax,1
+	db      0fh,0a2h        ;CPUID   
+
+exitcpudetect:
+	ret
+
+end_cpu_is_386:
+	mov     eax,0300h
+	jmp     exitcpudetect
+
+is_old_486:
+	mov     eax,0400h
+	jmp     exitcpudetect
+
+IFDEF NOUNDERLINE
+cpudetect32     endp
+ELSE
+_cpudetect32    endp
+ENDIF
+
+_TEXT   ends
+end

contrib/asm386/gvmat32c.c

@@ -0,0 +1,200 @@
+/* gvmat32.c -- C portion of the optimized longest_match for 32 bits x86
+ * Copyright (C) 1995-1996 Jean-loup Gailly and Gilles Vollant.
+ * File written by Gilles Vollant, by modifiying the longest_match
+ *  from Jean-loup Gailly in deflate.c
+ *  it prepare all parameters and call the assembly longest_match_gvasm
+ *  longest_match execute standard C code is wmask != 0x7fff
+ *     (assembly code is faster with a fixed wmask)
+ *
+ */
+
+#include "deflate.h"
+
+#undef FAR
+#include <windows.h>
+
+#ifdef ASMV
+#define NIL 0
+
+#define UNALIGNED_OK
+
+
+/* if your C compiler don't add underline before function name,
+		define ADD_UNDERLINE_ASMFUNC */
+#ifdef ADD_UNDERLINE_ASMFUNC
+#define longest_match_7fff _longest_match_7fff
+#endif
+
+
+
+void match_init()
+{
+}
+
+unsigned long cpudetect32();
+
+uInt longest_match_c(
+    deflate_state *s,
+    IPos cur_match);                             /* current match */
+
+
+uInt longest_match_7fff(
+    deflate_state *s,
+    IPos cur_match);                             /* current match */
+
+uInt longest_match(
+    deflate_state *s,
+    IPos cur_match)                             /* current match */
+{
+	static uInt iIsPPro=2;
+
+    if ((s->w_mask == 0x7fff) && (iIsPPro==0))
+        return longest_match_7fff(s,cur_match);
+
+	if (iIsPPro==2)
+		iIsPPro = (((cpudetect32()/0x100)&0xf)>=6) ? 1 : 0;
+
+	return longest_match_c(s,cur_match);
+}
+
+
+
+uInt longest_match_c(s, cur_match)
+    deflate_state *s;
+    IPos cur_match;                             /* current match */
+{
+    unsigned chain_length = s->max_chain_length;/* max hash chain length */
+    register Bytef *scan = s->window + s->strstart; /* current string */
+    register Bytef *match;                       /* matched string */
+    register int len;                           /* length of current match */
+    int best_len = s->prev_length;              /* best match length so far */
+    int nice_match = s->nice_match;             /* stop if match long enough */
+    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+        s->strstart - (IPos)MAX_DIST(s) : NIL;
+    /* Stop when cur_match becomes <= limit. To simplify the code,
+     * we prevent matches with the string of window index 0.
+     */
+    Posf *prev = s->prev;
+    uInt wmask = s->w_mask;
+
+#ifdef UNALIGNED_OK
+    /* Compare two bytes at a time. Note: this is not always beneficial.
+     * Try with and without -DUNALIGNED_OK to check.
+     */
+    register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
+    register ush scan_start = *(ushf*)scan;
+    register ush scan_end   = *(ushf*)(scan+best_len-1);
+#else
+    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
+    register Byte scan_end1  = scan[best_len-1];
+    register Byte scan_end   = scan[best_len];
+#endif
+
+    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+     * It is easy to get rid of this optimization if necessary.
+     */
+    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
+
+    /* Do not waste too much time if we already have a good match: */
+    if (s->prev_length >= s->good_match) {
+        chain_length >>= 2;
+    }
+    /* Do not look for matches beyond the end of the input. This is necessary
+     * to make deflate deterministic.
+     */
+    if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
+
+    do {
+        Assert(cur_match < s->strstart, "no future");
+        match = s->window + cur_match;
+
+        /* Skip to next match if the match length cannot increase
+         * or if the match length is less than 2:
+         */
+#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
+        /* This code assumes sizeof(unsigned short) == 2. Do not use
+         * UNALIGNED_OK if your compiler uses a different size.
+         */
+        if (*(ushf*)(match+best_len-1) != scan_end ||
+            *(ushf*)match != scan_start) continue;
+
+        /* It is not necessary to compare scan[2] and match[2] since they are
+         * always equal when the other bytes match, given that the hash keys
+         * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
+         * strstart+3, +5, ... up to strstart+257. We check for insufficient
+         * lookahead only every 4th comparison; the 128th check will be made
+         * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
+         * necessary to put more guard bytes at the end of the window, or
+         * to check more often for insufficient lookahead.
+         */
+        Assert(scan[2] == match[2], "scan[2]?");
+        scan++, match++;
+        do {
+        } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 scan < strend);
+        /* The funny "do {}" generates better code on most compilers */
+
+        /* Here, scan <= window+strstart+257 */
+        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+        if (*scan == *match) scan++;
+
+        len = (MAX_MATCH - 1) - (int)(strend-scan);
+        scan = strend - (MAX_MATCH-1);
+
+#else /* UNALIGNED_OK */
+
+        if (match[best_len]   != scan_end  ||
+            match[best_len-1] != scan_end1 ||
+            *match            != *scan     ||
+            *++match          != scan[1])      continue;
+
+        /* The check at best_len-1 can be removed because it will be made
+         * again later. (This heuristic is not always a win.)
+         * It is not necessary to compare scan[2] and match[2] since they
+         * are always equal when the other bytes match, given that
+         * the hash keys are equal and that HASH_BITS >= 8.
+         */
+        scan += 2, match++;
+        Assert(*scan == *match, "match[2]?");
+
+        /* We check for insufficient lookahead only every 8th comparison;
+         * the 256th check will be made at strstart+258.
+         */
+        do {
+        } while (*++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 scan < strend);
+
+        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+
+        len = MAX_MATCH - (int)(strend - scan);
+        scan = strend - MAX_MATCH;
+
+#endif /* UNALIGNED_OK */
+
+        if (len > best_len) {
+            s->match_start = cur_match;
+            best_len = len;
+            if (len >= nice_match) break;
+#ifdef UNALIGNED_OK
+            scan_end = *(ushf*)(scan+best_len-1);
+#else
+            scan_end1  = scan[best_len-1];
+            scan_end   = scan[best_len];
+#endif
+        }
+    } while ((cur_match = prev[cur_match & wmask]) > limit
+             && --chain_length != 0);
+
+    if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+    return s->lookahead;
+}
+
+#endif /* ASMV */

contrib/asm386/mkgvmt32.bat

@@ -0,0 +1 @@
+c:\masm611\bin\ml /coff /Zi /c /Flgvmat32.lst gvmat32.asm

contrib/asm386/zlibvc.dsp

@@ -0,0 +1,612 @@
+# Microsoft Developer Studio Project File - Name="zlibvc" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 5.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102
+# TARGTYPE "Win32 (ALPHA) Dynamic-Link Library" 0x0602
+
+CFG=zlibvc - Win32 Release
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "zlibvc.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "zlibvc.mak" CFG="zlibvc - Win32 Release"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "zlibvc - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlibvc - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlibvc - Win32 ReleaseAxp" (based on\
+ "Win32 (ALPHA) Dynamic-Link Library")
+!MESSAGE "zlibvc - Win32 ReleaseWithoutAsm" (based on\
+ "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlibvc - Win32 ReleaseWithoutCrtdll" (based on\
+ "Win32 (x86) Dynamic-Link Library")
+!MESSAGE 
+
+# Begin Project
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir ".\Release"
+# PROP BASE Intermediate_Dir ".\Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir ".\Release"
+# PROP Intermediate_Dir ".\Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /YX /FD /c
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "NDEBUG"
+# ADD RSC /l 0x40c /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /machine:I386
+# ADD LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
+# SUBTRACT LINK32 /pdb:none
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir ".\Debug"
+# PROP BASE Intermediate_Dir ".\Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir ".\Debug"
+# PROP Intermediate_Dir ".\Debug"
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /YX /c
+# ADD CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /YX /FD /c
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "_DEBUG" /win32
+# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "_DEBUG"
+# ADD RSC /l 0x40c /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /debug /machine:I386
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /debug /machine:I386 /out:".\Debug\zlib.dll"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlibvc__"
+# PROP BASE Intermediate_Dir "zlibvc__"
+# PROP BASE Ignore_Export_Lib 0
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "zlibvc__"
+# PROP Intermediate_Dir "zlibvc__"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+CPP=cl.exe
+# ADD BASE CPP /nologo /MT /Gt0 /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /YX /FD /c
+# ADD CPP /nologo /MT /Gt0 /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /YX /FD /c
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "NDEBUG"
+# ADD RSC /l 0x40c /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 crtdll.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /map /machine:ALPHA /nodefaultlib /out:".\Release\zlib.dll"
+# SUBTRACT BASE LINK32 /pdb:none
+# ADD LINK32 crtdll.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /map /machine:ALPHA /nodefaultlib /out:"zlibvc__\zlib.dll"
+# SUBTRACT LINK32 /pdb:none
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlibvc_0"
+# PROP BASE Intermediate_Dir "zlibvc_0"
+# PROP BASE Ignore_Export_Lib 0
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "zlibvc_0"
+# PROP Intermediate_Dir "zlibvc_0"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /YX /FD /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /YX /FD /c
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "NDEBUG"
+# ADD RSC /l 0x40c /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
+# SUBTRACT BASE LINK32 /pdb:none
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\zlibvc_0\zlib.dll"
+# SUBTRACT LINK32 /pdb:none
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlibvc_1"
+# PROP BASE Intermediate_Dir "zlibvc_1"
+# PROP BASE Ignore_Export_Lib 0
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "zlibvc_1"
+# PROP Intermediate_Dir "zlibvc_1"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /YX /FD /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /YX /FD /c
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "NDEBUG"
+# ADD RSC /l 0x40c /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
+# SUBTRACT BASE LINK32 /pdb:none
+# ADD LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\zlibvc_1\zlib.dll"
+# SUBTRACT LINK32 /pdb:none
+
+!ENDIF 
+
+# Begin Target
+
+# Name "zlibvc - Win32 Release"
+# Name "zlibvc - Win32 Debug"
+# Name "zlibvc - Win32 ReleaseAxp"
+# Name "zlibvc - Win32 ReleaseWithoutAsm"
+# Name "zlibvc - Win32 ReleaseWithoutCrtdll"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;hpj;bat;for;f90"
+# Begin Source File
+
+SOURCE=.\adler32.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_ADLER=\
+	".\zconf.h"\
+	".\zlib.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\compress.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_COMPR=\
+	".\zconf.h"\
+	".\zlib.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\crc32.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_CRC32=\
+	".\zconf.h"\
+	".\zlib.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\deflate.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_DEFLA=\
+	".\deflate.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\gvmat32c.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\gzio.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_GZIO_=\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\infblock.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFBL=\
+	".\infblock.h"\
+	".\infcodes.h"\
+	".\inftrees.h"\
+	".\infutil.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\infcodes.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFCO=\
+	".\infblock.h"\
+	".\infcodes.h"\
+	".\inffast.h"\
+	".\inftrees.h"\
+	".\infutil.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\inffast.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFFA=\
+	".\infblock.h"\
+	".\infcodes.h"\
+	".\inffast.h"\
+	".\inftrees.h"\
+	".\infutil.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\inflate.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFLA=\
+	".\infblock.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\inftrees.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFTR=\
+	".\inftrees.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\infutil.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFUT=\
+	".\infblock.h"\
+	".\infcodes.h"\
+	".\inftrees.h"\
+	".\infutil.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\trees.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_TREES=\
+	".\deflate.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\uncompr.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_UNCOM=\
+	".\zconf.h"\
+	".\zlib.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\zlib.rc
+# End Source File
+# Begin Source File
+
+SOURCE=.\zlibvc.def
+# End Source File
+# Begin Source File
+
+SOURCE=.\zutil.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_ZUTIL=\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd"
+# Begin Source File
+
+SOURCE=.\deflate.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\infblock.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\infcodes.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\inffast.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\inftrees.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\infutil.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\zconf.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\zlib.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\zutil.h
+# End Source File
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project

contrib/asm386/zlibvc.dsw

@@ -0,0 +1,29 @@
+Microsoft Developer Studio Workspace File, Format Version 5.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "zlibvc"=".\zlibvc.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

contrib/iostream/test.cpp

@@ -0,0 +1,24 @@
+
+#include "zfstream.h"
+
+int main() {
+
+  // Construct a stream object with this filebuffer.  Anything sent
+  // to this stream will go to standard out.
+  gzofstream os( 1, ios::out );
+
+  // This text is getting compressed and sent to stdout.
+  // To prove this, run 'test | zcat'.
+  os << "Hello, Mommy" << endl;
+
+  os << setcompressionlevel( Z_NO_COMPRESSION );
+  os << "hello, hello, hi, ho!" << endl;
+
+  setcompressionlevel( os, Z_DEFAULT_COMPRESSION )
+    << "I'm compressing again" << endl;
+
+  os.close();
+
+  return 0;
+
+}

contrib/iostream/zfstream.cpp

@@ -0,0 +1,329 @@
+
+#include <memory.h>
+#include "zfstream.h"
+
+gzfilebuf::gzfilebuf() :
+  file(NULL),
+  mode(0),
+  own_file_descriptor(0)
+{ }
+
+gzfilebuf::~gzfilebuf() {
+
+  sync();
+  if ( own_file_descriptor )
+    close();
+
+}
+
+gzfilebuf *gzfilebuf::open( const char *name,
+			    int io_mode ) {
+
+  if ( is_open() )
+    return NULL;
+
+  char char_mode[10];
+  char *p;
+  memset(char_mode,'\0',10);
+  p = char_mode;
+
+  if ( io_mode & ios::in ) {
+    mode = ios::in;
+    *p++ = 'r';
+  } else if ( io_mode & ios::app ) {
+    mode = ios::app;
+    *p++ = 'a';
+  } else {
+    mode = ios::out;
+    *p++ = 'w';
+  }
+
+  if ( io_mode & ios::binary ) {
+    mode |= ios::binary;
+    *p++ = 'b';
+  }
+
+  // Hard code the compression level
+  if ( io_mode & (ios::out|ios::app )) {
+    *p++ = '9';
+  }
+
+  if ( (file = gzopen(name, char_mode)) == NULL )
+    return NULL;
+
+  own_file_descriptor = 1;
+
+  return this;
+
+}
+
+gzfilebuf *gzfilebuf::attach( int file_descriptor,
+			      int io_mode ) {
+
+  if ( is_open() )
+    return NULL;
+
+  char char_mode[10];
+  char *p;
+  memset(char_mode,'\0',10);
+  p = char_mode;
+
+  if ( io_mode & ios::in ) {
+    mode = ios::in;
+    *p++ = 'r';
+  } else if ( io_mode & ios::app ) {
+    mode = ios::app;
+    *p++ = 'a';
+  } else {
+    mode = ios::out;
+    *p++ = 'w';
+  }
+
+  if ( io_mode & ios::binary ) {
+    mode |= ios::binary;
+    *p++ = 'b';
+  }
+
+  // Hard code the compression level
+  if ( io_mode & (ios::out|ios::app )) {
+    *p++ = '9';
+  }
+
+  if ( (file = gzdopen(file_descriptor, char_mode)) == NULL )
+    return NULL;
+
+  own_file_descriptor = 0;
+
+  return this;
+
+}
+
+gzfilebuf *gzfilebuf::close() {
+
+  if ( is_open() ) {
+
+    sync();
+    gzclose( file );
+    file = NULL;
+
+  }
+
+  return this;
+
+}
+
+int gzfilebuf::setcompressionlevel( short comp_level ) {
+
+  return gzsetparams(file, comp_level, -2);
+
+}
+
+int gzfilebuf::setcompressionstrategy( short comp_strategy ) {
+
+  return gzsetparams(file, -2, comp_strategy);
+
+}
+
+
+streampos gzfilebuf::seekoff( streamoff off, ios::seek_dir dir, int which ) {
+
+  return streampos(EOF);
+
+}
+
+int gzfilebuf::underflow() {
+
+  // If the file hasn't been opened for reading, error.
+  if ( !is_open() || !(mode & ios::in) )
+    return EOF;
+
+  // if a buffer doesn't exists, allocate one.
+  if ( !base() ) {
+
+    if ( (allocate()) == EOF )
+      return EOF;
+    setp(0,0);
+
+  } else {
+
+    if ( in_avail() )
+      return (unsigned char) *gptr();
+
+    if ( out_waiting() ) {
+      if ( flushbuf() == EOF )
+	return EOF;
+    }
+
+  }
+
+  // Attempt to fill the buffer.
+
+  int result = fillbuf();
+  if ( result == EOF ) {
+    // disable get area
+    setg(0,0,0);
+    return EOF;
+  }
+
+  return (unsigned char) *gptr();
+
+}
+
+int gzfilebuf::overflow( int c ) {
+
+  if ( !is_open() || !(mode & ios::out) )
+    return EOF;
+
+  if ( !base() ) {
+    if ( allocate() == EOF )
+      return EOF;
+    setg(0,0,0);
+  } else {
+    if (in_avail()) {
+	return EOF;
+    }
+    if (out_waiting()) {
+      if (flushbuf() == EOF)
+	return EOF;
+    }
+  }
+
+  int bl = blen();
+  setp( base(), base() + bl);
+
+  if ( c != EOF ) {
+
+    *pptr() = c;
+    pbump(1);
+
+  }
+
+  return 0;
+
+}
+
+int gzfilebuf::sync() {
+
+  if ( !is_open() )
+    return EOF;
+
+  if ( out_waiting() )
+    return flushbuf();
+
+  return 0;
+
+}
+
+int gzfilebuf::flushbuf() {
+
+  int n;
+  char *q;
+
+  q = pbase();
+  n = pptr() - q;
+
+  if ( gzwrite( file, q, n) < n )
+    return EOF;
+
+  setp(0,0);
+
+  return 0;
+
+}
+
+int gzfilebuf::fillbuf() {
+
+  int required;
+  char *p;
+
+  p = base();
+
+  required = blen();
+
+  int t = gzread( file, p, required );
+
+  if ( t <= 0) return EOF;
+
+  setg( base(), base(), base()+t);
+
+  return t;
+
+}
+
+gzfilestream_common::gzfilestream_common() :
+  ios( gzfilestream_common::rdbuf() )
+{ }
+
+gzfilestream_common::~gzfilestream_common()
+{ }
+
+void gzfilestream_common::attach( int fd, int io_mode ) {
+
+  if ( !buffer.attach( fd, io_mode) )
+    clear( ios::failbit | ios::badbit );
+  else
+    clear();
+
+}
+
+void gzfilestream_common::open( const char *name, int io_mode ) {
+
+  if ( !buffer.open( name, io_mode ) )
+    clear( ios::failbit | ios::badbit );
+  else
+    clear();
+
+}
+
+void gzfilestream_common::close() {
+
+  if ( !buffer.close() )
+    clear( ios::failbit | ios::badbit );
+
+}
+
+gzfilebuf *gzfilestream_common::rdbuf() {
+
+  return &buffer;
+
+}
+     
+gzifstream::gzifstream() :
+  ios( gzfilestream_common::rdbuf() )
+{
+  clear( ios::badbit );
+}
+
+gzifstream::gzifstream( const char *name, int io_mode ) :
+  ios( gzfilestream_common::rdbuf() )
+{
+  gzfilestream_common::open( name, io_mode );
+}
+
+gzifstream::gzifstream( int fd, int io_mode ) :
+  ios( gzfilestream_common::rdbuf() )
+{
+  gzfilestream_common::attach( fd, io_mode );
+}
+
+gzifstream::~gzifstream() { }
+
+gzofstream::gzofstream() :
+  ios( gzfilestream_common::rdbuf() )
+{
+  clear( ios::badbit );
+}
+
+gzofstream::gzofstream( const char *name, int io_mode ) :
+  ios( gzfilestream_common::rdbuf() )
+{
+  gzfilestream_common::open( name, io_mode );
+}
+
+gzofstream::gzofstream( int fd, int io_mode ) :
+  ios( gzfilestream_common::rdbuf() )
+{
+  gzfilestream_common::attach( fd, io_mode );
+}
+
+gzofstream::~gzofstream() { }

contrib/iostream/zfstream.h

@@ -0,0 +1,142 @@
+
+#ifndef _zfstream_h
+#define _zfstream_h
+
+#include <fstream.h>
+#include "zlib.h"
+
+class gzfilebuf : public streambuf {
+
+public:
+
+  gzfilebuf( );
+  virtual ~gzfilebuf();
+
+  gzfilebuf *open( const char *name, int io_mode );
+  gzfilebuf *attach( int file_descriptor, int io_mode );
+  gzfilebuf *close();
+
+  int setcompressionlevel( short comp_level );
+  int setcompressionstrategy( short comp_strategy );
+
+  inline int is_open() const { return (file !=NULL); }
+
+  virtual streampos seekoff( streamoff, ios::seek_dir, int );
+
+  virtual int sync();
+
+protected:
+
+  virtual int underflow();
+  virtual int overflow( int = EOF );
+
+private:
+
+  gzFile file;
+  short mode;
+  short own_file_descriptor;
+
+  int flushbuf();
+  int fillbuf();
+
+};
+
+class gzfilestream_common : virtual public ios {
+
+  friend class gzifstream;
+  friend class gzofstream;
+  friend gzofstream &setcompressionlevel( gzofstream &, int );
+  friend gzofstream &setcompressionstrategy( gzofstream &, int );
+
+public:
+  virtual ~gzfilestream_common();
+
+  void attach( int fd, int io_mode );
+  void open( const char *name, int io_mode );
+  void close();
+
+protected:
+  gzfilestream_common();
+
+private:
+  gzfilebuf *rdbuf();
+
+  gzfilebuf buffer;
+
+};
+
+class gzifstream : public gzfilestream_common, public istream {
+
+public:
+
+  gzifstream();
+  gzifstream( const char *name, int io_mode = ios::in );
+  gzifstream( int fd, int io_mode = ios::in );
+
+  virtual ~gzifstream();
+
+};
+
+class gzofstream : public gzfilestream_common, public ostream {
+
+public:
+
+  gzofstream();
+  gzofstream( const char *name, int io_mode = ios::out );
+  gzofstream( int fd, int io_mode = ios::out );
+
+  virtual ~gzofstream();
+
+};
+
+template<class T> class gzomanip {
+  friend gzofstream &operator<<(gzofstream &, const gzomanip<T> &);
+public:
+  gzomanip(gzofstream &(*f)(gzofstream &, T), T v) : func(f), val(v) { }
+private:
+  gzofstream &(*func)(gzofstream &, T);
+  T val;
+};
+
+template<class T> gzofstream &operator<<(gzofstream &s,
+					 const gzomanip<T> &m) {
+  return (*m.func)(s, m.val);
+  
+}
+
+inline gzofstream &setcompressionlevel( gzofstream &s, int l ) {
+  (s.rdbuf())->setcompressionlevel(l);
+  return s;
+}
+
+inline gzofstream &setcompressionstrategy( gzofstream &s, int l ) {
+  (s.rdbuf())->setcompressionstrategy(l);
+  return s;
+}
+
+inline gzomanip<int> setcompressionlevel(int l)
+{
+  return gzomanip<int>(&setcompressionlevel,l);
+}
+
+inline gzomanip<int> setcompressionstrategy(int l)
+{
+  return gzomanip<int>(&setcompressionstrategy,l);
+}
+
+#endif
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+

contrib/iostream2/zstream.h

@@ -0,0 +1,307 @@
+/*
+ *
+ * Copyright (c) 1997
+ * Christian Michelsen Research AS
+ * Advanced Computing
+ * Fantoftvegen 38, 5036 BERGEN, Norway
+ * http://www.cmr.no
+ *
+ * Permission to use, copy, modify, distribute and sell this software
+ * and its documentation for any purpose is hereby granted without fee,
+ * provided that the above copyright notice appear in all copies and
+ * that both that copyright notice and this permission notice appear
+ * in supporting documentation.  Christian Michelsen Research AS makes no
+ * representations about the suitability of this software for any
+ * purpose.  It is provided "as is" without express or implied warranty.
+ *
+ */
+
+#ifndef ZSTREAM__H
+#define ZSTREAM__H
+
+/*
+ * zstream.h - C++ interface to the 'zlib' general purpose compression library
+ * $Id: zstream.h 1.1 1997-06-25 12:00:56+02 tyge Exp tyge $
+ */
+
+#include <strstream.h>
+#include <string.h>
+#include <stdio.h>
+#include "zlib.h"
+
+#if defined(_WIN32)
+#   include <fcntl.h>
+#   include <io.h>
+#   define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+#   define SET_BINARY_MODE(file)
+#endif
+
+class zstringlen {
+public:
+    zstringlen(class izstream&);
+    zstringlen(class ozstream&, const char*);
+    size_t value() const { return val.word; }
+private:
+    struct Val { unsigned char byte; size_t word; } val;
+};
+
+//  ----------------------------- izstream -----------------------------
+
+class izstream
+{
+    public:
+        izstream() : m_fp(0) {}
+        izstream(FILE* fp) : m_fp(0) { open(fp); }
+        izstream(const char* name) : m_fp(0) { open(name); }
+        ~izstream() { close(); }
+
+        /* Opens a gzip (.gz) file for reading.
+         * open() can be used to read a file which is not in gzip format;
+         * in this case read() will directly read from the file without
+         * decompression. errno can be checked to distinguish two error
+         * cases (if errno is zero, the zlib error is Z_MEM_ERROR).
+         */
+        void open(const char* name) {
+            if (m_fp) close();
+            m_fp = ::gzopen(name, "rb");
+        }
+
+        void open(FILE* fp) {
+            SET_BINARY_MODE(fp);
+            if (m_fp) close();
+            m_fp = ::gzdopen(fileno(fp), "rb");
+        }
+
+        /* Flushes all pending input if necessary, closes the compressed file
+         * and deallocates all the (de)compression state. The return value is
+         * the zlib error number (see function error() below).
+         */
+        int close() {
+            int r = ::gzclose(m_fp);
+            m_fp = 0; return r;
+        }
+
+        /* Binary read the given number of bytes from the compressed file.
+         */
+        int read(void* buf, size_t len) {
+            return ::gzread(m_fp, buf, len);
+        }
+
+        /* Returns the error message for the last error which occurred on the
+         * given compressed file. errnum is set to zlib error number. If an
+         * error occurred in the file system and not in the compression library,
+         * errnum is set to Z_ERRNO and the application may consult errno
+         * to get the exact error code.
+         */
+        const char* error(int* errnum) {
+            return ::gzerror(m_fp, errnum);
+        }
+
+        gzFile fp() { return m_fp; }
+
+    private:
+        gzFile m_fp;
+};
+
+/*
+ * Binary read the given (array of) object(s) from the compressed file.
+ * If the input file was not in gzip format, read() copies the objects number
+ * of bytes into the buffer.
+ * returns the number of uncompressed bytes actually read
+ * (0 for end of file, -1 for error).
+ */
+template <class T, class Items>
+inline int read(izstream& zs, T* x, Items items) {
+    return ::gzread(zs.fp(), x, items*sizeof(T));
+}
+
+/*
+ * Binary input with the '>' operator.
+ */
+template <class T>
+inline izstream& operator>(izstream& zs, T& x) {
+    ::gzread(zs.fp(), &x, sizeof(T));
+    return zs;
+}
+
+
+inline zstringlen::zstringlen(izstream& zs) {
+    zs > val.byte;
+    if (val.byte == 255) zs > val.word;
+    else val.word = val.byte;
+}
+
+/*
+ * Read length of string + the string with the '>' operator.
+ */
+inline izstream& operator>(izstream& zs, char* x) {
+    zstringlen len(zs);
+    ::gzread(zs.fp(), x, len.value());
+    x[len.value()] = '\0';
+    return zs;
+}
+
+inline char* read_string(izstream& zs) {
+    zstringlen len(zs);
+    char* x = new char[len.value()+1];
+    ::gzread(zs.fp(), x, len.value());
+    x[len.value()] = '\0';
+    return x;
+}
+
+// ----------------------------- ozstream -----------------------------
+
+class ozstream
+{
+    public:
+        ozstream() : m_fp(0), m_os(0) {
+        }
+        ozstream(FILE* fp, int level = Z_DEFAULT_COMPRESSION)
+            : m_fp(0), m_os(0) {
+            open(fp, level);
+        }
+        ozstream(const char* name, int level = Z_DEFAULT_COMPRESSION)
+            : m_fp(0), m_os(0) {
+            open(name, level);
+        }
+        ~ozstream() {
+            close();
+        }
+
+        /* Opens a gzip (.gz) file for writing.
+         * The compression level parameter should be in 0..9
+         * errno can be checked to distinguish two error cases
+         * (if errno is zero, the zlib error is Z_MEM_ERROR).
+         */
+        void open(const char* name, int level = Z_DEFAULT_COMPRESSION) {
+            char mode[4] = "wb\0";
+            if (level != Z_DEFAULT_COMPRESSION) mode[2] = '0'+level;
+            if (m_fp) close();
+            m_fp = ::gzopen(name, mode);
+        }
+
+        /* open from a FILE pointer.
+         */
+        void open(FILE* fp, int level = Z_DEFAULT_COMPRESSION) {
+            SET_BINARY_MODE(fp);
+            char mode[4] = "wb\0";
+            if (level != Z_DEFAULT_COMPRESSION) mode[2] = '0'+level;
+            if (m_fp) close();
+            m_fp = ::gzdopen(fileno(fp), mode);
+        }
+
+        /* Flushes all pending output if necessary, closes the compressed file
+         * and deallocates all the (de)compression state. The return value is
+         * the zlib error number (see function error() below).
+         */
+        int close() {
+            if (m_os) {
+                ::gzwrite(m_fp, m_os->str(), m_os->pcount());
+                delete[] m_os->str(); delete m_os; m_os = 0;
+            }
+            int r = ::gzclose(m_fp); m_fp = 0; return r;
+        }
+
+        /* Binary write the given number of bytes into the compressed file.
+         */
+        int write(const void* buf, size_t len) {
+            return ::gzwrite(m_fp, (voidp) buf, len);
+        }
+
+        /* Flushes all pending output into the compressed file. The parameter
+         * _flush is as in the deflate() function. The return value is the zlib
+         * error number (see function gzerror below). flush() returns Z_OK if
+         * the flush_ parameter is Z_FINISH and all output could be flushed.
+         * flush() should be called only when strictly necessary because it can
+         * degrade compression.
+         */
+        int flush(int _flush) {
+            os_flush();
+            return ::gzflush(m_fp, _flush);
+        }
+
+        /* Returns the error message for the last error which occurred on the
+         * given compressed file. errnum is set to zlib error number. If an
+         * error occurred in the file system and not in the compression library,
+         * errnum is set to Z_ERRNO and the application may consult errno
+         * to get the exact error code.
+         */
+        const char* error(int* errnum) {
+            return ::gzerror(m_fp, errnum);
+        }
+
+        gzFile fp() { return m_fp; }
+
+        ostream& os() {
+            if (m_os == 0) m_os = new ostrstream;
+            return *m_os;
+        }
+
+        void os_flush() {
+            if (m_os && m_os->pcount()>0) {
+                ostrstream* oss = new ostrstream;
+                oss->fill(m_os->fill());
+                oss->flags(m_os->flags());
+                oss->precision(m_os->precision());
+                oss->width(m_os->width());
+                ::gzwrite(m_fp, m_os->str(), m_os->pcount());
+                delete[] m_os->str(); delete m_os; m_os = oss;
+            }
+        }
+
+    private:
+        gzFile m_fp;
+        ostrstream* m_os;
+};
+
+/*
+ * Binary write the given (array of) object(s) into the compressed file.
+ * returns the number of uncompressed bytes actually written
+ * (0 in case of error).
+ */
+template <class T, class Items>
+inline int write(ozstream& zs, const T* x, Items items) {
+    return ::gzwrite(zs.fp(), (voidp) x, items*sizeof(T));
+}
+
+/*
+ * Binary output with the '<' operator.
+ */
+template <class T>
+inline ozstream& operator<(ozstream& zs, const T& x) {
+    ::gzwrite(zs.fp(), (voidp) &x, sizeof(T));
+    return zs;
+}
+
+inline zstringlen::zstringlen(ozstream& zs, const char* x) {
+    val.byte = 255;  val.word = ::strlen(x);
+    if (val.word < 255) zs < (val.byte = val.word);
+    else zs < val;
+}
+
+/*
+ * Write length of string + the string with the '<' operator.
+ */
+inline ozstream& operator<(ozstream& zs, const char* x) {
+    zstringlen len(zs, x);
+    ::gzwrite(zs.fp(), (voidp) x, len.value());
+    return zs;
+}
+
+#ifdef _MSC_VER
+inline ozstream& operator<(ozstream& zs, char* const& x) {
+    return zs < (const char*) x;
+}
+#endif
+
+/*
+ * Ascii write with the << operator;
+ */
+template <class T>
+inline ostream& operator<<(ozstream& zs, const T& x) {
+    zs.os_flush();
+    return zs.os() << x;
+}
+
+#endif

contrib/iostream2/zstream_test.cpp

@@ -0,0 +1,25 @@
+#include "zstream.h"
+#include <math.h>
+#include <stdlib.h>
+#include <iomanip.h>
+
+void main() {
+	char h[256] = "Hello";
+	char* g = "Goodbye";
+	ozstream out("temp.gz");
+    out < "This works well" < h < g;
+    out.close();
+
+    izstream in("temp.gz"); // read it back
+    char *x = read_string(in), *y = new char[256], z[256];
+    in > y > z;
+    in.close();
+    cout << x << endl << y << endl << z << endl;
+
+    out.open("temp.gz"); // try ascii output; zcat temp.gz to see the results
+    out << setw(50) << setfill('#') << setprecision(20) << x << endl << y << endl << z << endl;
+    out << z << endl << y << endl << x << endl;
+    out << 1.1234567890123456789 << endl;
+
+    delete[] x; delete[] y;
+}

contrib/untgz/Makefile

@@ -0,0 +1,14 @@
+CC=cc
+CFLAGS=-g
+
+untgz: untgz.o  ../../libz.a
+	$(CC) $(CFLAGS) -o untgz  untgz.o -L../.. -lz
+
+untgz.o: untgz.c ../../zlib.h
+	$(CC) $(CFLAGS) -c -I../.. untgz.c
+
+../../libz.a:
+	cd ../..; make
+
+clean:
+	rm -f untgz untgz.o *~

contrib/untgz/makefile.w32

@@ -0,0 +1,63 @@
+# Makefile for zlib.  Modified for mingw32
+# For conditions of distribution and use, see copyright notice in zlib.h 
+
+# To compile, 
+# 
+#   make -fmakefile.w32
+# 
+
+CC=gcc
+
+# Generate dependencies (see end of the file)
+
+CPPFLAGS=-MMD 
+
+#CFLAGS=-MMD -O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-MMD -g -DDEBUG
+CFLAGS=-O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+             -Wstrict-prototypes -Wmissing-prototypes
+
+# If cp.exe is not found, replace with copy /Y .
+CP=cp -f
+
+# The default value of RM is "rm -f."  
+# If "rm.exe" is not found, uncomment:
+# RM=del
+
+LD=gcc
+LDLIBS=-L. -lz
+LDFLAGS=-s
+
+
+INCL=zlib.h zconf.h
+LIBS=libz.a
+
+AR=ar rcs
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o \
+       inffast.o
+
+TEST_OBJS = minigzip.o untgz.o
+
+all: minigzip.exe untgz.exe
+
+rebuild:	clean	all
+
+libz.a: $(OBJS)
+	$(AR) $@ $(OBJS)
+
+%.exe : %.o $(LIBS)
+	$(LD) $(LDFLAGS) -o $@ $< $(LDLIBS)
+
+.PHONY : clean
+
+clean:
+	$(RM) *.d *.o *.exe libz.a foo.gz
+
+DEPS := $(wildcard *.d)
+ifneq ($(DEPS),)
+include $(DEPS)
+endif
+

contrib/untgz/untgz.c

@@ -0,0 +1,478 @@
+/*
+ * untgz.c -- Display contents and/or extract file from
+ * a gzip'd TAR file
+ * written by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+ * adaptation to Unix by Jean-loup Gailly <jloup@gzip.org>
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <utime.h>
+#include <errno.h>
+#include <fcntl.h>
+#ifdef unix
+# include <unistd.h>
+#else
+# include <direct.h>
+# include <io.h>
+#endif
+
+#include "zlib.h"
+
+/* Values used in typeflag field.  */
+
+#define REGTYPE	 '0'		/* regular file */
+#define AREGTYPE '\0'		/* regular file */
+#define LNKTYPE  '1'		/* link */
+#define SYMTYPE  '2'		/* reserved */
+#define CHRTYPE  '3'		/* character special */
+#define BLKTYPE  '4'		/* block special */
+#define DIRTYPE  '5'		/* directory */
+#define FIFOTYPE '6'		/* FIFO special */
+#define CONTTYPE '7'		/* reserved */
+
+#define BLOCKSIZE 512
+
+struct tar_header
+{				/* byte offset */
+  char name[100];		/*   0 */
+  char mode[8];			/* 100 */
+  char uid[8];			/* 108 */
+  char gid[8];			/* 116 */
+  char size[12];		/* 124 */
+  char mtime[12];		/* 136 */
+  char chksum[8];		/* 148 */
+  char typeflag;		/* 156 */
+  char linkname[100];		/* 157 */
+  char magic[6];		/* 257 */
+  char version[2];		/* 263 */
+  char uname[32];		/* 265 */
+  char gname[32];		/* 297 */
+  char devmajor[8];		/* 329 */
+  char devminor[8];		/* 337 */
+  char prefix[155];		/* 345 */
+				/* 500 */
+};
+
+union tar_buffer {
+  char               buffer[BLOCKSIZE];
+  struct tar_header  header;
+};
+
+enum { TGZ_EXTRACT = 0, TGZ_LIST };
+
+static char *TGZfname	OF((const char *));
+void TGZnotfound	OF((const char *));
+
+int getoct		OF((char *, int));
+char *strtime		OF((time_t *));
+int ExprMatch		OF((char *,char *));
+
+int makedir		OF((char *));
+int matchname		OF((int,int,char **,char *));
+
+void error		OF((const char *));
+int  tar		OF((gzFile, int, int, int, char **));
+
+void help		OF((int));
+int main		OF((int, char **));
+
+char *prog;
+
+/* This will give a benign warning */
+
+static char *TGZprefix[] = { "\0", ".tgz", ".tar.gz", NULL };
+
+/* Return the real name of the TGZ archive */
+/* or NULL if it does not exist. */
+
+static char *TGZfname OF((const char *fname))
+{
+  static char buffer[1024];
+  int origlen,i;
+  
+  strcpy(buffer,fname);
+  origlen = strlen(buffer);
+
+  for (i=0; TGZprefix[i]; i++)
+    {
+       strcpy(buffer+origlen,TGZprefix[i]);
+       if (access(buffer,F_OK) == 0)
+         return buffer;
+    }
+  return NULL;
+}
+
+/* error message for the filename */
+
+void TGZnotfound OF((const char *fname))
+{
+  int i;
+
+  fprintf(stderr,"%s : couldn't find ",prog);
+  for (i=0;TGZprefix[i];i++)
+    fprintf(stderr,(TGZprefix[i+1]) ? "%s%s, " : "or %s%s\n",
+            fname,
+            TGZprefix[i]);
+  exit(1);
+}
+
+
+/* help functions */
+
+int getoct(char *p,int width)
+{
+  int result = 0;
+  char c;
+  
+  while (width --)
+    {
+      c = *p++;
+      if (c == ' ')
+	continue;
+      if (c == 0)
+	break;
+      result = result * 8 + (c - '0');
+    }
+  return result;
+}
+
+char *strtime (time_t *t)
+{
+  struct tm   *local;
+  static char result[32];
+
+  local = localtime(t);
+  sprintf(result,"%2d/%02d/%4d %02d:%02d:%02d",
+	  local->tm_mday, local->tm_mon+1, local->tm_year+1900,
+	  local->tm_hour, local->tm_min,   local->tm_sec);
+  return result;
+}
+
+
+/* regular expression matching */
+
+#define ISSPECIAL(c) (((c) == '*') || ((c) == '/'))
+
+int ExprMatch(char *string,char *expr)
+{
+  while (1)
+    {
+      if (ISSPECIAL(*expr))
+	{
+	  if (*expr == '/')
+	    {
+	      if (*string != '\\' && *string != '/')
+		return 0;
+	      string ++; expr++;
+	    }
+	  else if (*expr == '*')
+	    {
+	      if (*expr ++ == 0)
+		return 1;
+	      while (*++string != *expr)
+		if (*string == 0)
+		  return 0;
+	    }
+	}
+      else
+	{
+	  if (*string != *expr)
+	    return 0;
+	  if (*expr++ == 0)
+	    return 1;
+	  string++;
+	}
+    }
+}
+
+/* recursive make directory */
+/* abort if you get an ENOENT errno somewhere in the middle */
+/* e.g. ignore error "mkdir on existing directory" */
+/* */
+/* return 1 if OK */
+/*        0 on error */
+
+int makedir (char *newdir)
+{
+  char *buffer = strdup(newdir);
+  char *p;
+  int  len = strlen(buffer);
+  
+  if (len <= 0) {
+    free(buffer);
+    return 0;
+  }
+  if (buffer[len-1] == '/') {
+    buffer[len-1] = '\0';
+  }
+  if (mkdir(buffer, 0775) == 0)
+    {
+      free(buffer);
+      return 1;
+    }
+
+  p = buffer+1;
+  while (1)
+    {
+      char hold;
+      
+      while(*p && *p != '\\' && *p != '/')
+	p++;
+      hold = *p;
+      *p = 0;
+      if ((mkdir(buffer, 0775) == -1) && (errno == ENOENT))
+	{
+	  fprintf(stderr,"%s: couldn't create directory %s\n",prog,buffer);
+	  free(buffer);
+	  return 0;
+	}
+      if (hold == 0)
+	break;
+      *p++ = hold;
+    }
+  free(buffer);
+  return 1;
+}
+
+int matchname (int arg,int argc,char **argv,char *fname)
+{
+  if (arg == argc)		/* no arguments given (untgz tgzarchive) */
+    return 1;
+
+  while (arg < argc)
+    if (ExprMatch(fname,argv[arg++]))
+      return 1;
+
+  return 0; /* ignore this for the moment being */
+}
+
+
+/* Tar file list or extract */
+
+int tar (gzFile in,int action,int arg,int argc,char **argv)
+{
+  union  tar_buffer buffer;
+  int    len;
+  int    err;
+  int    getheader = 1;
+  int    remaining = 0;
+  FILE   *outfile = NULL;
+  char   fname[BLOCKSIZE];
+  time_t tartime;
+  
+  if (action == TGZ_LIST)
+    printf("     day      time     size                       file\n"
+	   " ---------- -------- --------- -------------------------------------\n");
+  while (1)
+    {
+      len = gzread(in, &buffer, BLOCKSIZE);
+      if (len < 0)
+	error (gzerror(in, &err));
+      /*
+       * if we met the end of the tar
+       * or the end-of-tar block,
+       * we are done
+       */
+      if ((len == 0)  || (buffer.header.name[0]== 0))
+	break;
+      
+      /*
+       * Always expect complete blocks to process
+       * the tar information.
+       */
+      if (len != BLOCKSIZE)
+	error("gzread: incomplete block read");
+      
+      /*
+       * If we have to get a tar header
+       */
+      if (getheader == 1)
+	{
+	  tartime = (time_t)getoct(buffer.header.mtime,12);
+	  strcpy(fname,buffer.header.name);
+	  
+	  switch (buffer.header.typeflag)
+	    {
+	    case DIRTYPE:
+	      if (action == TGZ_LIST)
+		printf(" %s     <dir> %s\n",strtime(&tartime),fname);
+	      if (action == TGZ_EXTRACT)
+		makedir(fname);
+	      break;
+	    case REGTYPE:
+	    case AREGTYPE:
+	      remaining = getoct(buffer.header.size,12);
+	      if (action == TGZ_LIST)
+		printf(" %s %9d %s\n",strtime(&tartime),remaining,fname);
+	      if (action == TGZ_EXTRACT)
+		{
+		  if ((remaining) && (matchname(arg,argc,argv,fname)))
+		    {
+		      outfile = fopen(fname,"wb");
+		      if (outfile == NULL) {
+			/* try creating directory */
+			char *p = strrchr(fname, '/');
+			if (p != NULL) {
+			  *p = '\0';
+			  makedir(fname);
+			  *p = '/';
+			  outfile = fopen(fname,"wb");
+			}
+		      }
+		      fprintf(stderr,
+			      "%s %s\n",
+			      (outfile) ? "Extracting" : "Couldn't create",
+			      fname);
+		    }
+		  else
+		    outfile = NULL;
+		}
+	      /*
+	       * could have no contents
+	       */
+	      getheader = (remaining) ? 0 : 1;
+	      break;
+	    default:
+	      if (action == TGZ_LIST)
+		printf(" %s     <---> %s\n",strtime(&tartime),fname);
+	      break;
+	    }
+	}
+      else
+	{
+	  unsigned int bytes = (remaining > BLOCKSIZE) ? BLOCKSIZE : remaining;
+
+	  if ((action == TGZ_EXTRACT) && (outfile != NULL))
+	    {
+	      if (fwrite(&buffer,sizeof(char),bytes,outfile) != bytes)
+		{
+		  fprintf(stderr,"%s : error writing %s skipping...\n",prog,fname);
+		  fclose(outfile);
+		  unlink(fname);
+		}
+	    }
+	  remaining -= bytes;
+	  if (remaining == 0)
+	    {
+	      getheader = 1;
+	      if ((action == TGZ_EXTRACT) && (outfile != NULL))
+		{
+		  struct utimbuf settime;
+
+		  settime.actime = settime.modtime = tartime;
+
+		  fclose(outfile);
+		  outfile = NULL;
+		  utime(fname,&settime);
+		}
+	    }
+	}
+    }
+  
+  if (gzclose(in) != Z_OK)
+    error("failed gzclose");
+
+  return 0;
+}
+
+
+/* =========================================================== */
+
+void help(int exitval)
+{
+  fprintf(stderr,
+	  "untgz v 0.1\n"
+	  " an sample application of zlib 1.0.4\n\n"
+          "Usage : untgz TGZfile            to extract all files\n"
+          "        untgz TGZfile fname ...  to extract selected files\n"
+          "        untgz -l TGZfile         to list archive contents\n"
+          "        untgz -h                 to display this help\n\n");
+  exit(exitval);
+}
+
+void error(const char *msg)
+{
+    fprintf(stderr, "%s: %s\n", prog, msg);
+    exit(1);
+}
+
+
+/* ====================================================================== */
+
+int _CRT_glob = 0;	/* disable globbing of the arguments */
+
+int main(int argc,char **argv)
+{
+    int 	action = TGZ_EXTRACT;
+    int 	arg = 1;
+    char	*TGZfile;
+    gzFile	*f;
+    
+
+    prog = strrchr(argv[0],'\\');
+    if (prog == NULL)
+      {
+	prog = strrchr(argv[0],'/');
+	if (prog == NULL)
+	  {
+	    prog = strrchr(argv[0],':');
+	    if (prog == NULL)
+	      prog = argv[0];
+	    else
+	      prog++;
+	  }
+	else
+	  prog++;
+      }
+    else
+      prog++;
+    
+    if (argc == 1)
+      help(0);
+
+    if (strcmp(argv[arg],"-l") == 0)
+      {
+	action = TGZ_LIST;
+	if (argc == ++arg)
+	  help(0);
+      }
+    else if (strcmp(argv[arg],"-h") == 0)
+      {
+	help(0);
+      }
+
+    if ((TGZfile = TGZfname(argv[arg])) == NULL)
+      TGZnotfound(argv[arg]);            
+
+    ++arg;
+    if ((action == TGZ_LIST) && (arg != argc))
+      help(1);
+
+/*
+ *  Process the TGZ file
+ */
+    switch(action)
+      {
+      case TGZ_LIST:
+      case TGZ_EXTRACT:
+	f = gzopen(TGZfile,"rb");
+	if (f == NULL)
+	  {
+	    fprintf(stderr,"%s: Couldn't gzopen %s\n",
+		    prog,
+		    TGZfile);
+	    return 1;
+	  }
+	exit(tar(f, action, arg, argc, argv));
+      break;
+	
+      default:
+	error("Unknown option!");
+	exit(1);
+      }
+
+    return 0;
+}

contrib/visual-basic.txt

@@ -0,0 +1,57 @@
+From: "Jon Caruana" <jon-net@usa.net>
+To: "Jean-loup Gailly" <gzip@prep.ai.mit.edu>
+Subject: Re: How to port zlib declares to vb?
+Date: Mon, 28 Oct 1996 18:33:03 -0600
+
+Got the answer! (I haven't had time to check this but it's what I got, and
+looks correct):
+
+He has the following routines working:
+        compress
+        uncompress
+        gzopen
+        gzwrite
+        gzread
+        gzclose
+
+Declares follow: (Quoted from Carlos Rios <c_rios@sonda.cl>, in Vb4 form)
+
+#If Win16 Then   'Use Win16 calls.
+Declare Function compress Lib "ZLIB.DLL" (ByVal compr As
+        String, comprLen As Any, ByVal buf As String, ByVal buflen
+        As Long) As Integer
+Declare Function uncompress Lib "ZLIB.DLL" (ByVal uncompr
+        As String, uncomprLen As Any, ByVal compr As String, ByVal
+        lcompr As Long) As Integer
+Declare Function gzopen Lib "ZLIB.DLL" (ByVal filePath As
+        String, ByVal mode As String) As Long
+Declare Function gzread Lib "ZLIB.DLL" (ByVal file As
+        Long, ByVal uncompr As String, ByVal uncomprLen As Integer)
+        As Integer
+Declare Function gzwrite Lib "ZLIB.DLL" (ByVal file As
+        Long, ByVal uncompr As String, ByVal uncomprLen As Integer)
+        As Integer
+Declare Function gzclose Lib "ZLIB.DLL" (ByVal file As
+        Long) As Integer
+#Else
+Declare Function compress Lib "ZLIB32.DLL"
+        (ByVal compr As String, comprLen As Any, ByVal buf As
+        String, ByVal buflen As Long) As Integer
+Declare Function uncompress Lib "ZLIB32.DLL"
+        (ByVal uncompr As String, uncomprLen As Any, ByVal compr As
+        String, ByVal lcompr As Long) As Long
+Declare Function gzopen Lib "ZLIB32.DLL"
+        (ByVal file As String, ByVal mode As String) As Long
+Declare Function gzread Lib "ZLIB32.DLL"
+        (ByVal file As Long, ByVal uncompr As String, ByVal
+        uncomprLen As Long) As Long
+Declare Function gzwrite Lib "ZLIB32.DLL"
+        (ByVal file As Long, ByVal uncompr As String, ByVal
+        uncomprLen As Long) As Long
+Declare Function gzclose Lib "ZLIB32.DLL"
+        (ByVal file As Long) As Long
+#End If
+
+-Jon Caruana
+jon-net@usa.net
+Microsoft Sitebuilder Network Level 1 Member - HTML Writer's Guild Member

crc32.c

@@ -1,9 +1,9 @@
 /* crc32.c -- compute the CRC-32 of a data stream
- * Copyright (C) 1995-1996 Mark Adler
+ * Copyright (C) 1995-1998 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
-/* $Id: crc32.c,v 1.8 1996/01/30 21:59:10 me Exp $ */
+/* @(#) $Id$ */
 
 #include "zlib.h"
 
@@ -45,7 +45,7 @@ local void make_crc_table()
   int n, k;
   uLong poly;            /* polynomial exclusive-or pattern */
   /* terms of polynomial defining this crc (except x^32): */
-  static Byte p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
+  static const Byte p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
 
   /* make exclusive-or pattern from polynomial (0xedb88320L) */
   poly = 0L;
@@ -65,7 +65,7 @@ local void make_crc_table()
 /* ========================================================================
  * Table of CRC-32's of all single-byte values (made by make_crc_table)
  */
-local uLongf crc_table[256] = {
+local const uLongf crc_table[256] = {
   0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L,
   0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L,
   0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L,
@@ -124,12 +124,12 @@ local uLongf crc_table[256] = {
 /* =========================================================================
  * This function can be used by asm versions of crc32()
  */
-uLongf *get_crc_table()
+const uLongf * ZEXPORT get_crc_table()
 {
 #ifdef DYNAMIC_CRC_TABLE
   if (crc_table_empty) make_crc_table();
 #endif
-  return (uLongf *)crc_table;
+  return (const uLongf *)crc_table;
 }
 
 /* ========================================================================= */
@@ -139,7 +139,7 @@ uLongf *get_crc_table()
 #define DO8(buf)  DO4(buf); DO4(buf);
 
 /* ========================================================================= */
-uLong crc32(crc, buf, len)
+uLong ZEXPORT crc32(crc, buf, len)
     uLong crc;
     const Bytef *buf;
     uInt len;

deflate.c

@@ -36,8 +36,8 @@
  *
  *  REFERENCES
  *
- *      Deutsch, L.P.,"'Deflate' Compressed Data Format Specification".
+ *      Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
- *      Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc
+ *      Available in ftp://ds.internic.net/rfc/rfc1951.txt
  *
  *      A description of the Rabin and Karp algorithm is given in the book
  *         "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
@@ -47,10 +47,12 @@
  *
  */
 
+/* @(#) $Id$ */
 
 #include "deflate.h"
 
-char deflate_copyright[] = " deflate 1.0.5 Copyright 1995-1998 Jean-loup Gailly ";
+const char deflate_copyright[] =
+   " deflate 1.1.1 Copyright 1995-1998 Jean-loup Gailly ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -76,12 +78,14 @@ local block_state deflate_stored OF((deflate_state *s, int flush));
 local block_state deflate_fast   OF((deflate_state *s, int flush));
 local block_state deflate_slow   OF((deflate_state *s, int flush));
 local void lm_init        OF((deflate_state *s));
-local uInt longest_match  OF((deflate_state *s, IPos cur_match));
 local void putShortMSB    OF((deflate_state *s, uInt b));
 local void flush_pending  OF((z_streamp strm));
-local int read_buf        OF((z_streamp strm, charf *buf, unsigned size));
+local int read_buf        OF((z_streamp strm, Bytef *buf, unsigned size));
 #ifdef ASMV
       void match_init OF((void)); /* asm code initialization */
+      uInt longest_match  OF((deflate_state *s, IPos cur_match));
+#else
+local uInt longest_match  OF((deflate_state *s, IPos cur_match));
 #endif
 
 #ifdef DEBUG
@@ -119,7 +123,7 @@ typedef struct config_s {
    compress_func func;
 } config;
 
-local config configuration_table[10] = {
+local const config configuration_table[10] = {
 /*      good lazy nice chain */
 /* 0 */ {0,    0,  0,    0, deflate_stored},  /* store only */
 /* 1 */ {4,    4,  8,    4, deflate_fast}, /* maximum speed, no lazy matches */
@@ -156,14 +160,23 @@ struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
  * Insert string str in the dictionary and set match_head to the previous head
  * of the hash chain (the most recent string with same hash key). Return
  * the previous length of the hash chain.
+ * If this file is compiled with -DFASTEST, the compression level is forced
+ * to 1, and no hash chains are maintained.
  * IN  assertion: all calls to to INSERT_STRING are made with consecutive
  *    input characters and the first MIN_MATCH bytes of str are valid
  *    (except for the last MIN_MATCH-1 bytes of the input file).
  */
+#ifdef FASTEST
+#define INSERT_STRING(s, str, match_head) \
+   (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
+    match_head = s->head[s->ins_h], \
+    s->head[s->ins_h] = (Pos)(str))
+#else
 #define INSERT_STRING(s, str, match_head) \
    (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
     s->prev[(str) & s->w_mask] = match_head = s->head[s->ins_h], \
     s->head[s->ins_h] = (Pos)(str))
+#endif
 
 /* ===========================================================================
  * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
@@ -171,10 +184,10 @@ struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
  */
 #define CLEAR_HASH(s) \
     s->head[s->hash_size-1] = NIL; \
-    zmemzero((charf *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
+    zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
 
 /* ========================================================================= */
-int deflateInit_(strm, level, version, stream_size)
+int ZEXPORT deflateInit_(strm, level, version, stream_size)
     z_streamp strm;
     int level;
     const char *version;
@@ -186,7 +199,7 @@ int deflateInit_(strm, level, version, stream_size)
 }
 
 /* ========================================================================= */
-int deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
+int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
 		  version, stream_size)
     z_streamp strm;
     int  level;
@@ -199,13 +212,14 @@ int deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
 {
     deflate_state *s;
     int noheader = 0;
+    static const char* my_version = ZLIB_VERSION;
 
     ushf *overlay;
     /* We overlay pending_buf and d_buf+l_buf. This works since the average
      * output size for (length,distance) codes is <= 24 bits.
      */
 
-    if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+    if (version == Z_NULL || version[0] != my_version[0] ||
         stream_size != sizeof(z_stream)) {
 	return Z_VERSION_ERROR;
     }
@@ -219,6 +233,9 @@ int deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
     if (strm->zfree == Z_NULL) strm->zfree = zcfree;
 
     if (level == Z_DEFAULT_COMPRESSION) level = 6;
+#ifdef FASTEST
+    level = 1;
+#endif
 
     if (windowBits < 0) { /* undocumented feature: suppress zlib header */
         noheader = 1;
@@ -252,6 +269,7 @@ int deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
 
     overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2);
     s->pending_buf = (uchf *) overlay;
+    s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L);
 
     if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
         s->pending_buf == Z_NULL) {
@@ -270,7 +288,7 @@ int deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
 }
 
 /* ========================================================================= */
-int deflateSetDictionary (strm, dictionary, dictLength)
+int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
     z_streamp strm;
     const Bytef *dictionary;
     uInt  dictLength;
@@ -289,9 +307,11 @@ int deflateSetDictionary (strm, dictionary, dictLength)
     if (length < MIN_MATCH) return Z_OK;
     if (length > MAX_DIST(s)) {
 	length = MAX_DIST(s);
-	dictionary += dictLength - length;
+#ifndef USE_DICT_HEAD
+	dictionary += dictLength - length; /* use the tail of the dictionary */
+#endif
     }
-    zmemcpy((charf *)s->window, dictionary, length);
+    zmemcpy(s->window, dictionary, length);
     s->strstart = length;
     s->block_start = (long)length;
 
@@ -309,7 +329,7 @@ int deflateSetDictionary (strm, dictionary, dictLength)
 }
 
 /* ========================================================================= */
-int deflateReset (strm)
+int ZEXPORT deflateReset (strm)
     z_streamp strm;
 {
     deflate_state *s;
@@ -339,7 +359,7 @@ int deflateReset (strm)
 }
 
 /* ========================================================================= */
-int deflateParams(strm, level, strategy)
+int ZEXPORT deflateParams(strm, level, strategy)
     z_streamp strm;
     int level;
     int strategy;
@@ -413,7 +433,7 @@ local void flush_pending(strm)
 }
 
 /* ========================================================================= */
-int deflate (strm, flush)
+int ZEXPORT deflate (strm, flush)
     z_streamp strm;
     int flush;
 {
@@ -547,42 +567,85 @@ int deflate (strm, flush)
 }
 
 /* ========================================================================= */
-int deflateEnd (strm)
+int ZEXPORT deflateEnd (strm)
     z_streamp strm;
 {
     int status;
 
     if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
 
+    status = strm->state->status;
+    if (status != INIT_STATE && status != BUSY_STATE &&
+	status != FINISH_STATE) {
+      return Z_STREAM_ERROR;
+    }
+
     /* Deallocate in reverse order of allocations: */
     TRY_FREE(strm, strm->state->pending_buf);
     TRY_FREE(strm, strm->state->head);
     TRY_FREE(strm, strm->state->prev);
     TRY_FREE(strm, strm->state->window);
 
-    status = strm->state->status;
     ZFREE(strm, strm->state);
     strm->state = Z_NULL;
 
     return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
 }
 
-/* ========================================================================= */
+/* =========================================================================
-int deflateCopy (dest, source)
+ * Copy the source state to the destination state.
+ * To simplify the source, this is not supported for 16-bit MSDOS (which
+ * doesn't have enough memory anyway to duplicate compression states).
+ */
+int ZEXPORT deflateCopy (dest, source)
     z_streamp dest;
     z_streamp source;
 {
-    if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) {
+#ifdef MAXSEG_64K
+    return Z_STREAM_ERROR;
+#else
+    deflate_state *ds;
+    deflate_state *ss;
+    ushf *overlay;
+
+    ss = source->state;
+
+    if (source == Z_NULL || dest == Z_NULL || ss == Z_NULL) {
         return Z_STREAM_ERROR;
     }
     *dest = *source;
-    return Z_STREAM_ERROR; /* to be implemented */
-#if 0
-    dest->state = (struct internal_state FAR *)
-        (*dest->zalloc)(1, sizeof(deflate_state));
-    if (dest->state == Z_NULL) return Z_MEM_ERROR;
 
-    *(dest->state) = *(source->state);
+    ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
+    if (ds == Z_NULL) return Z_MEM_ERROR;
+    dest->state = (struct internal_state FAR *) ds;
+    *ds = *ss;
+    ds->strm = dest;
+
+    ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
+    ds->prev   = (Posf *)  ZALLOC(dest, ds->w_size, sizeof(Pos));
+    ds->head   = (Posf *)  ZALLOC(dest, ds->hash_size, sizeof(Pos));
+    overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2);
+    ds->pending_buf = (uchf *) overlay;
+
+    if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL ||
+        ds->pending_buf == Z_NULL) {
+        deflateEnd (dest);
+        return Z_MEM_ERROR;
+    }
+    /* following zmemcpy do not work for 16-bit MSDOS */
+    zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
+    zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos));
+    zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos));
+    zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
+
+    ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
+    ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush);
+    ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize;
+
+    ds->l_desc.dyn_tree = ds->dyn_ltree;
+    ds->d_desc.dyn_tree = ds->dyn_dtree;
+    ds->bl_desc.dyn_tree = ds->bl_tree;
+
     return Z_OK;
 #endif
 }
@@ -596,7 +659,7 @@ int deflateCopy (dest, source)
  */
 local int read_buf(strm, buf, size)
     z_streamp strm;
-    charf *buf;
+    Bytef *buf;
     unsigned size;
 {
     unsigned len = strm->avail_in;
@@ -657,6 +720,7 @@ local void lm_init (s)
 /* For 80x86 and 680x0, an optimized version will be provided in match.asm or
  * match.S. The code will be functionally equivalent.
  */
+#ifndef FASTEST
 local uInt longest_match(s, cur_match)
     deflate_state *s;
     IPos cur_match;                             /* current match */
@@ -791,9 +855,67 @@ local uInt longest_match(s, cur_match)
     } while ((cur_match = prev[cur_match & wmask]) > limit
              && --chain_length != 0);
 
-    if ((uInt)best_len <= s->lookahead) return best_len;
+    if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
     return s->lookahead;
 }
+
+#else /* FASTEST */
+/* ---------------------------------------------------------------------------
+ * Optimized version for level == 1 only
+ */
+local uInt longest_match(s, cur_match)
+    deflate_state *s;
+    IPos cur_match;                             /* current match */
+{
+    register Bytef *scan = s->window + s->strstart; /* current string */
+    register Bytef *match;                       /* matched string */
+    register int len;                           /* length of current match */
+    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
+
+    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+     * It is easy to get rid of this optimization if necessary.
+     */
+    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
+
+    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
+
+    Assert(cur_match < s->strstart, "no future");
+
+    match = s->window + cur_match;
+
+    /* Return failure if the match length is less than 2:
+     */
+    if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1;
+
+    /* The check at best_len-1 can be removed because it will be made
+     * again later. (This heuristic is not always a win.)
+     * It is not necessary to compare scan[2] and match[2] since they
+     * are always equal when the other bytes match, given that
+     * the hash keys are equal and that HASH_BITS >= 8.
+     */
+    scan += 2, match += 2;
+    Assert(*scan == *match, "match[2]?");
+
+    /* We check for insufficient lookahead only every 8th comparison;
+     * the 256th check will be made at strstart+258.
+     */
+    do {
+    } while (*++scan == *++match && *++scan == *++match &&
+	     *++scan == *++match && *++scan == *++match &&
+	     *++scan == *++match && *++scan == *++match &&
+	     *++scan == *++match && *++scan == *++match &&
+	     scan < strend);
+
+    Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+
+    len = MAX_MATCH - (int)(strend - scan);
+
+    if (len < MIN_MATCH) return MIN_MATCH - 1;
+
+    s->match_start = cur_match;
+    return len <= s->lookahead ? len : s->lookahead;
+}
+#endif /* FASTEST */
 #endif /* ASMV */
 
 #ifdef DEBUG
@@ -806,8 +928,8 @@ local void check_match(s, start, match, length)
     int length;
 {
     /* check that the match is indeed a match */
-    if (zmemcmp((charf *)s->window + match,
+    if (zmemcmp(s->window + match,
-                (charf *)s->window + start, length) != EQUAL) {
+                s->window + start, length) != EQUAL) {
         fprintf(stderr, " start %u, match %u, length %d\n",
 		start, match, length);
         do {
@@ -815,7 +937,7 @@ local void check_match(s, start, match, length)
 	} while (--length != 0);
         z_error("invalid match");
     }
-    if (verbose > 1) {
+    if (z_verbose > 1) {
         fprintf(stderr,"\\[%d,%d]", start-match, length);
         do { putc(s->window[start++], stderr); } while (--length != 0);
     }
@@ -860,33 +982,35 @@ local void fill_window(s)
          */
         } else if (s->strstart >= wsize+MAX_DIST(s)) {
 
-            zmemcpy((charf *)s->window, (charf *)s->window+wsize,
+            zmemcpy(s->window, s->window+wsize, (unsigned)wsize);
-                   (unsigned)wsize);
             s->match_start -= wsize;
             s->strstart    -= wsize; /* we now have strstart >= MAX_DIST */
-
             s->block_start -= (long) wsize;
 
             /* Slide the hash table (could be avoided with 32 bit values
-               at the expense of memory usage):
+               at the expense of memory usage). We slide even when level == 0
+               to keep the hash table consistent if we switch back to level > 0
+               later. (Using level 0 permanently is not an optimal usage of
+               zlib, so we don't care about this pathological case.)
              */
-            n = s->hash_size;
+	    n = s->hash_size;
-            p = &s->head[n];
+	    p = &s->head[n];
-            do {
+	    do {
-                m = *--p;
+		m = *--p;
-                *p = (Pos)(m >= wsize ? m-wsize : NIL);
+		*p = (Pos)(m >= wsize ? m-wsize : NIL);
-            } while (--n);
+	    } while (--n);
-
-            n = wsize;
-            p = &s->prev[n];
-            do {
-                m = *--p;
-                *p = (Pos)(m >= wsize ? m-wsize : NIL);
-                /* If n is not on any hash chain, prev[n] is garbage but
-                 * its value will never be used.
-                 */
-            } while (--n);
 
+	    n = wsize;
+#ifndef FASTEST
+	    p = &s->prev[n];
+	    do {
+		m = *--p;
+		*p = (Pos)(m >= wsize ? m-wsize : NIL);
+		/* If n is not on any hash chain, prev[n] is garbage but
+		 * its value will never be used.
+		 */
+	    } while (--n);
+#endif
             more += wsize;
         }
         if (s->strm->avail_in == 0) return;
@@ -904,8 +1028,7 @@ local void fill_window(s)
          */
         Assert(more >= 2, "more < 2");
 
-        n = read_buf(s->strm, (charf *)s->window + s->strstart + s->lookahead,
+        n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more);
-                     more);
         s->lookahead += n;
 
         /* Initialize the hash value now that we have some input: */
@@ -950,12 +1073,24 @@ local void fill_window(s)
  * This function does not insert new strings in the dictionary since
  * uncompressible data is probably not useful. This function is used
  * only for the level=0 compression option.
- * NOTE: this function should be optimized to avoid extra copying.
+ * NOTE: this function should be optimized to avoid extra copying from
+ * window to pending_buf.
  */
 local block_state deflate_stored(s, flush)
     deflate_state *s;
     int flush;
 {
+    /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
+     * to pending_buf_size, and each stored block has a 5 byte header:
+     */
+    ulg max_block_size = 0xffff;
+    ulg max_start;
+
+    if (max_block_size > s->pending_buf_size - 5) {
+        max_block_size = s->pending_buf_size - 5;
+    }
+
+    /* Copy as much as possible from input to output: */
     for (;;) {
         /* Fill the window as much as possible: */
         if (s->lookahead <= 1) {
@@ -973,14 +1108,17 @@ local block_state deflate_stored(s, flush)
 	s->strstart += s->lookahead;
 	s->lookahead = 0;
 
-        /* Stored blocks are limited to 0xffff bytes: */
+	/* Emit a stored block if pending_buf will be full: */
-        if (s->strstart == 0 || s->strstart > 0xfffe) {
+ 	max_start = s->block_start + max_block_size;
+        if (s->strstart == 0 || (ulg)s->strstart >= max_start) {
 	    /* strstart == 0 is possible when wraparound on 16-bit machine */
-	    s->lookahead = s->strstart - 0xffff;
+	    s->lookahead = (uInt)(s->strstart - max_start);
-	    s->strstart = 0xffff;
+	    s->strstart = (uInt)max_start;
+            FLUSH_BLOCK(s, 0);
 	}
-
+	/* Flush if we may have to slide, otherwise block_start may become
-	/* Emit a stored block if it is large enough: */
+         * negative and the data will be gone:
+         */
         if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) {
             FLUSH_BLOCK(s, 0);
 	}
@@ -1040,14 +1178,15 @@ local block_state deflate_fast(s, flush)
         if (s->match_length >= MIN_MATCH) {
             check_match(s, s->strstart, s->match_start, s->match_length);
 
-            bflush = _tr_tally(s, s->strstart - s->match_start,
+            _tr_tally_dist(s, s->strstart - s->match_start,
-                               s->match_length - MIN_MATCH);
+                           s->match_length - MIN_MATCH, bflush);
 
             s->lookahead -= s->match_length;
 
             /* Insert new strings in the hash table only if the match length
              * is not too large. This saves time but degrades compression.
              */
+#ifndef FASTEST
             if (s->match_length <= s->max_insert_length &&
                 s->lookahead >= MIN_MATCH) {
                 s->match_length--; /* string at strstart already in hash table */
@@ -1059,7 +1198,9 @@ local block_state deflate_fast(s, flush)
                      */
                 } while (--s->match_length != 0);
                 s->strstart++; 
-            } else {
+            } else
+#endif
+	    {
                 s->strstart += s->match_length;
                 s->match_length = 0;
                 s->ins_h = s->window[s->strstart];
@@ -1074,7 +1215,7 @@ local block_state deflate_fast(s, flush)
         } else {
             /* No match, output a literal byte */
             Tracevv((stderr,"%c", s->window[s->strstart]));
-            bflush = _tr_tally (s, 0, s->window[s->strstart]);
+            _tr_tally_lit (s, s->window[s->strstart], bflush);
             s->lookahead--;
             s->strstart++; 
         }
@@ -1153,8 +1294,8 @@ local block_state deflate_slow(s, flush)
 
             check_match(s, s->strstart-1, s->prev_match, s->prev_length);
 
-            bflush = _tr_tally(s, s->strstart -1 - s->prev_match,
+            _tr_tally_dist(s, s->strstart -1 - s->prev_match,
-                               s->prev_length - MIN_MATCH);
+			   s->prev_length - MIN_MATCH, bflush);
 
             /* Insert in hash table all strings up to the end of the match.
              * strstart-1 and strstart are already inserted. If there is not
@@ -1180,7 +1321,8 @@ local block_state deflate_slow(s, flush)
              * is longer, truncate the previous match to a single literal.
              */
             Tracevv((stderr,"%c", s->window[s->strstart-1]));
-            if (_tr_tally (s, 0, s->window[s->strstart-1])) {
+	    _tr_tally_lit(s, s->window[s->strstart-1], bflush);
+	    if (bflush) {
                 FLUSH_BLOCK_ONLY(s, 0);
             }
             s->strstart++;
@@ -1198,7 +1340,7 @@ local block_state deflate_slow(s, flush)
     Assert (flush != Z_NO_FLUSH, "no flush?");
     if (s->match_available) {
         Tracevv((stderr,"%c", s->window[s->strstart-1]));
-        _tr_tally (s, 0, s->window[s->strstart-1]);
+        _tr_tally_lit(s, s->window[s->strstart-1], bflush);
         s->match_available = 0;
     }
     FLUSH_BLOCK(s, flush == Z_FINISH);

deflate.h

@@ -1,5 +1,5 @@
 /* deflate.h -- internal compression state
- * Copyright (C) 1995-1996 Jean-loup Gailly
+ * Copyright (C) 1995-1998 Jean-loup Gailly
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -8,7 +8,7 @@
    subject to change. Applications should only use zlib.h.
  */
 
-/* $Id: deflate.h,v 1.10 1996/07/02 12:41:00 me Exp $ */
+/* @(#) $Id$ */
 
 #ifndef _DEFLATE_H
 #define _DEFLATE_H
@@ -83,6 +83,7 @@ typedef struct internal_state {
     z_streamp strm;      /* pointer back to this zlib stream */
     int   status;        /* as the name implies */
     Bytef *pending_buf;  /* output still pending */
+    ulg   pending_buf_size; /* size of pending_buf */
     Bytef *pending_out;  /* next pending byte to output to the stream */
     int   pending;       /* nb of bytes in the pending buffer */
     int   noheader;      /* suppress zlib header and adler32 */
@@ -272,4 +273,46 @@ ulg  _tr_flush_block  OF((deflate_state *s, charf *buf, ulg stored_len,
 void _tr_align        OF((deflate_state *s));
 void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
                           int eof));
+
+#define d_code(dist) \
+   ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
+/* Mapping from a distance to a distance code. dist is the distance - 1 and
+ * must not have side effects. _dist_code[256] and _dist_code[257] are never
+ * used.
+ */
+
+#ifndef DEBUG
+/* Inline versions of _tr_tally for speed: */
+
+#if defined(GEN_TREES_H) || !defined(STDC)
+  extern uch _length_code[];
+  extern uch _dist_code[];
+#else
+  extern const uch _length_code[];
+  extern const uch _dist_code[];
+#endif
+
+# define _tr_tally_lit(s, c, flush) \
+  { uch cc = (c); \
+    s->d_buf[s->last_lit] = 0; \
+    s->l_buf[s->last_lit++] = cc; \
+    s->dyn_ltree[cc].Freq++; \
+    flush = (s->last_lit == s->lit_bufsize-1); \
+   }
+# define _tr_tally_dist(s, distance, length, flush) \
+  { uch len = (length); \
+    ush dist = (distance); \
+    s->d_buf[s->last_lit] = dist; \
+    s->l_buf[s->last_lit++] = len; \
+    dist--; \
+    s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \
+    s->dyn_dtree[d_code(dist)].Freq++; \
+    flush = (s->last_lit == s->lit_bufsize-1); \
+  }
+#else
+# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c)
+# define _tr_tally_dist(s, distance, length, flush) \
+              flush = _tr_tally(s, distance, length) 
+#endif
+
 #endif

example.c

@@ -1,9 +1,9 @@
 /* example.c -- usage example of the zlib compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
+ * Copyright (C) 1995-1998 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
-/* $Id: example.c,v 1.16 1996/05/23 17:11:28 me Exp $ */
+/* @(#) $Id$ */
 
 #include <stdio.h>
 #include "zlib.h"
@@ -41,7 +41,7 @@ void test_large_deflate OF((Byte *compr, uLong comprLen,
 		            Byte *uncompr, uLong uncomprLen));
 void test_large_inflate OF((Byte *compr, uLong comprLen,
 		            Byte *uncompr, uLong uncomprLen));
-void test_flush         OF((Byte *compr, uLong comprLen));
+void test_flush         OF((Byte *compr, uLong *comprLen));
 void test_sync          OF((Byte *compr, uLong comprLen,
 		            Byte *uncompr, uLong uncomprLen));
 void test_dict_deflate  OF((Byte *compr, uLong comprLen));
@@ -69,6 +69,7 @@ void test_compress(compr, comprLen, uncompr, uncomprLen)
 
     if (strcmp((char*)uncompr, hello)) {
         fprintf(stderr, "bad uncompress\n");
+	exit(1);
     } else {
         printf("uncompress(): %s\n", uncompr);
     }
@@ -86,16 +87,23 @@ void test_gzio(out, in, uncompr, uncomprLen)
     int err;
     int len = strlen(hello)+1;
     gzFile file;
+    z_off_t pos;
 
     file = gzopen(out, "wb");
     if (file == NULL) {
         fprintf(stderr, "gzopen error\n");
         exit(1);
     }
-
+    gzputc(file, 'h');
-    if (gzwrite(file, (const voidp)hello, (unsigned)len) != len) {
+    if (gzputs(file, "ello") != 4) {
-        fprintf(stderr, "gzwrite err: %s\n", gzerror(file, &err));
+        fprintf(stderr, "gzputs err: %s\n", gzerror(file, &err));
+	exit(1);
     }
+    if (gzprintf(file, ", %s!", "hello") != 8) {
+        fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err));
+	exit(1);
+    }
+    gzseek(file, 1L, SEEK_CUR); /* add one zero byte */
     gzclose(file);
 
     file = gzopen(in, "rb");
@@ -107,14 +115,41 @@ void test_gzio(out, in, uncompr, uncomprLen)
     uncomprLen = gzread(file, uncompr, (unsigned)uncomprLen);
     if (uncomprLen != len) {
         fprintf(stderr, "gzread err: %s\n", gzerror(file, &err));
+	exit(1);
     }
-    gzclose(file);
-
     if (strcmp((char*)uncompr, hello)) {
-        fprintf(stderr, "bad gzread\n");
+        fprintf(stderr, "bad gzread: %s\n", (char*)uncompr);
+	exit(1);
     } else {
         printf("gzread(): %s\n", uncompr);
     }
+
+    pos = gzseek(file, -8L, SEEK_CUR);
+    if (pos != 6 || gztell(file) != pos) {
+	fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n",
+		pos, gztell(file));
+	exit(1);
+    }
+
+    if (gzgetc(file) != ' ') {
+	fprintf(stderr, "gzgetc error\n");
+	exit(1);
+    }
+
+    gzgets(file, (char*)uncompr, uncomprLen);
+    uncomprLen = strlen((char*)uncompr);
+    if (uncomprLen != 6) { /* "hello!" */
+        fprintf(stderr, "gzgets err after gzseek: %s\n", gzerror(file, &err));
+	exit(1);
+    }
+    if (strcmp((char*)uncompr, hello+7)) {
+        fprintf(stderr, "bad gzgets after gzseek\n");
+	exit(1);
+    } else {
+        printf("gzgets() after gzseek: %s\n", uncompr);
+    }
+
+    gzclose(file);
 }
 
 /* ===========================================================================
@@ -171,12 +206,13 @@ void test_inflate(compr, comprLen, uncompr, uncomprLen)
     d_stream.zfree = (free_func)0;
     d_stream.opaque = (voidpf)0;
 
+    d_stream.next_in  = compr;
+    d_stream.avail_in = 0;
+    d_stream.next_out = uncompr;
+
     err = inflateInit(&d_stream);
     CHECK_ERR(err, "inflateInit");
 
-    d_stream.next_in  = compr;
-    d_stream.next_out = uncompr;
-
     while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) {
         d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */
         err = inflate(&d_stream, Z_NO_FLUSH);
@@ -189,6 +225,7 @@ void test_inflate(compr, comprLen, uncompr, uncomprLen)
 
     if (strcmp((char*)uncompr, hello)) {
         fprintf(stderr, "bad inflate\n");
+	exit(1);
     } else {
         printf("inflate(): %s\n", uncompr);
     }
@@ -223,6 +260,7 @@ void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
     CHECK_ERR(err, "deflate");
     if (c_stream.avail_in != 0) {
         fprintf(stderr, "deflate not greedy\n");
+	exit(1);
     }
 
     /* Feed in already compressed data and switch to no compression: */
@@ -242,6 +280,7 @@ void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
     err = deflate(&c_stream, Z_FINISH);
     if (err != Z_STREAM_END) {
         fprintf(stderr, "deflate should report Z_STREAM_END\n");
+	exit(1);
     }
     err = deflateEnd(&c_stream);
     CHECK_ERR(err, "deflateEnd");
@@ -263,12 +302,12 @@ void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
     d_stream.zfree = (free_func)0;
     d_stream.opaque = (voidpf)0;
 
-    err = inflateInit(&d_stream);
-    CHECK_ERR(err, "inflateInit");
-
     d_stream.next_in  = compr;
     d_stream.avail_in = (uInt)comprLen;
 
+    err = inflateInit(&d_stream);
+    CHECK_ERR(err, "inflateInit");
+
     for (;;) {
         d_stream.next_out = uncompr;            /* discard the output */
 	d_stream.avail_out = (uInt)uncomprLen;
@@ -282,6 +321,7 @@ void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
 
     if (d_stream.total_out != 2*uncomprLen + comprLen/2) {
         fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out);
+	exit(1);
     } else {
         printf("large_inflate(): OK\n");
     }
@@ -292,7 +332,7 @@ void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
  */
 void test_flush(compr, comprLen)
     Byte *compr;
-    uLong comprLen;
+    uLong *comprLen;
 {
     z_stream c_stream; /* compression stream */
     int err;
@@ -308,7 +348,7 @@ void test_flush(compr, comprLen)
     c_stream.next_in  = (Bytef*)hello;
     c_stream.next_out = compr;
     c_stream.avail_in = 3;
-    c_stream.avail_out = (uInt)comprLen;
+    c_stream.avail_out = (uInt)*comprLen;
     err = deflate(&c_stream, Z_FULL_FLUSH);
     CHECK_ERR(err, "deflate");
 
@@ -321,6 +361,8 @@ void test_flush(compr, comprLen)
     }
     err = deflateEnd(&c_stream);
     CHECK_ERR(err, "deflateEnd");
+
+    *comprLen = c_stream.total_out;
 }
 
 /* ===========================================================================
@@ -339,12 +381,13 @@ void test_sync(compr, comprLen, uncompr, uncomprLen)
     d_stream.zfree = (free_func)0;
     d_stream.opaque = (voidpf)0;
 
+    d_stream.next_in  = compr;
+    d_stream.avail_in = 2; /* just read the zlib header */
+
     err = inflateInit(&d_stream);
     CHECK_ERR(err, "inflateInit");
 
-    d_stream.next_in  = compr;
     d_stream.next_out = uncompr;
-    d_stream.avail_in = 2; /* just read the zlib header */
     d_stream.avail_out = (uInt)uncomprLen;
 
     inflate(&d_stream, Z_NO_FLUSH);
@@ -358,6 +401,7 @@ void test_sync(compr, comprLen, uncompr, uncomprLen)
     if (err != Z_DATA_ERROR) {
         fprintf(stderr, "inflate should report DATA_ERROR\n");
         /* Because of incorrect adler32 */
+	exit(1);
     }
     err = inflateEnd(&d_stream);
     CHECK_ERR(err, "inflateEnd");
@@ -396,6 +440,7 @@ void test_dict_deflate(compr, comprLen)
     err = deflate(&c_stream, Z_FINISH);
     if (err != Z_STREAM_END) {
         fprintf(stderr, "deflate should report Z_STREAM_END\n");
+	exit(1);
     }
     err = deflateEnd(&c_stream);
     CHECK_ERR(err, "deflateEnd");
@@ -417,12 +462,12 @@ void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
     d_stream.zfree = (free_func)0;
     d_stream.opaque = (voidpf)0;
 
-    err = inflateInit(&d_stream);
-    CHECK_ERR(err, "inflateInit");
-
     d_stream.next_in  = compr;
     d_stream.avail_in = (uInt)comprLen;
 
+    err = inflateInit(&d_stream);
+    CHECK_ERR(err, "inflateInit");
+
     d_stream.next_out = uncompr;
     d_stream.avail_out = (uInt)uncomprLen;
 
@@ -445,6 +490,7 @@ void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
 
     if (strcmp((char*)uncompr, hello)) {
         fprintf(stderr, "bad inflate with dict\n");
+	exit(1);
     } else {
         printf("inflate with dictionary: %s\n", uncompr);
     }
@@ -461,8 +507,9 @@ int main(argc, argv)
     Byte *compr, *uncompr;
     uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */
     uLong uncomprLen = comprLen;
+    static const char* myVersion = ZLIB_VERSION;
 
-    if (zlibVersion()[0] != ZLIB_VERSION[0]) {
+    if (zlibVersion()[0] != myVersion[0]) {
         fprintf(stderr, "incompatible zlib version\n");
         exit(1);
 
@@ -479,7 +526,6 @@ int main(argc, argv)
         printf("out of memory\n");
 	exit(1);
     }
-
     test_compress(compr, comprLen, uncompr, uncomprLen);
 
     test_gzio((argc > 1 ? argv[1] : "foo.gz"),
@@ -492,8 +538,9 @@ int main(argc, argv)
     test_large_deflate(compr, comprLen, uncompr, uncomprLen);
     test_large_inflate(compr, comprLen, uncompr, uncomprLen);
 
-    test_flush(compr, comprLen);
+    test_flush(compr, &comprLen);
     test_sync(compr, comprLen, uncompr, uncomprLen);
+    comprLen = uncomprLen;
 
     test_dict_deflate(compr, comprLen);
     test_dict_inflate(compr, comprLen, uncompr, uncomprLen);

gzio.c

@@ -1,9 +1,11 @@
 /* gzio.c -- IO on .gz files
- * Copyright (C) 1995-1996 Jean-loup Gailly.
+ * Copyright (C) 1995-1998 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Compile this file with -DNO_DEFLATE to avoid the compression code.
  */
 
-/* $Id: gzio.c,v 1.14 1996/07/24 13:41:01 me Exp $ */
+/* @(#) $Id$ */
 
 #include <stdio.h>
 
@@ -11,7 +13,8 @@
 
 struct internal_state {int dummy;}; /* for buggy compilers */
 
-#define Z_BUFSIZE 4096
+#define Z_BUFSIZE       16384
+#define Z_PRINTF_BUFSIZE 4096
 
 #define ALLOC(size) malloc(size)
 #define TRYFREE(p) {if (p) free(p);}
@@ -38,10 +41,12 @@ typedef struct gz_stream {
     char     *path;   /* path name for debugging only */
     int      transparent; /* 1 if input file is not a .gz file */
     char     mode;    /* 'w' or 'r' */
+    long     startpos; /* start of compressed data in file (header skipped) */
 } gz_stream;
 
 
 local gzFile gz_open      OF((const char *path, const char *mode, int  fd));
+local int do_flush        OF((gzFile file, int flush));
 local int    get_byte     OF((gz_stream *s));
 local void   check_header OF((gz_stream *s));
 local int    destroy      OF((gz_stream *s));
@@ -64,6 +69,7 @@ local gzFile gz_open (path, mode, fd)
 {
     int err;
     int level = Z_DEFAULT_COMPRESSION; /* compression level */
+    int strategy = Z_DEFAULT_STRATEGY; /* compression strategy */
     char *p = (char*)mode;
     gz_stream *s;
     char fmode[80]; /* copy of mode, without the compression level */
@@ -99,6 +105,10 @@ local gzFile gz_open (path, mode, fd)
         if (*p == 'w' || *p == 'a') s->mode = 'w';
         if (*p >= '0' && *p <= '9') {
 	    level = *p - '0';
+	} else if (*p == 'f') {
+	  strategy = Z_FILTERED;
+	} else if (*p == 'h') {
+	  strategy = Z_HUFFMAN_ONLY;
 	} else {
 	    *m++ = *p; /* copy the mode */
 	}
@@ -106,19 +116,24 @@ local gzFile gz_open (path, mode, fd)
     if (s->mode == '\0') return destroy(s), (gzFile)Z_NULL;
     
     if (s->mode == 'w') {
+#ifdef NO_DEFLATE
+        err = Z_STREAM_ERROR;
+#else
         err = deflateInit2(&(s->stream), level,
-                           Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, 0);
+                           Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, strategy);
         /* windowBits is passed < 0 to suppress zlib header */
 
         s->stream.next_out = s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
-
+#endif
         if (err != Z_OK || s->outbuf == Z_NULL) {
             return destroy(s), (gzFile)Z_NULL;
         }
     } else {
-        err = inflateInit2(&(s->stream), -MAX_WBITS);
         s->stream.next_in  = s->inbuf = (Byte*)ALLOC(Z_BUFSIZE);
 
+        err = inflateInit2(&(s->stream), -MAX_WBITS);
+        /* windowBits is passed < 0 to tell that there is no zlib header */
+
         if (err != Z_OK || s->inbuf == Z_NULL) {
             return destroy(s), (gzFile)Z_NULL;
         }
@@ -126,7 +141,7 @@ local gzFile gz_open (path, mode, fd)
     s->stream.avail_out = Z_BUFSIZE;
 
     errno = 0;
-    s->file = fd < 0 ? FOPEN(path, fmode) : (FILE*)fdopen(fd, fmode);
+    s->file = fd < 0 ? F_OPEN(path, fmode) : (FILE*)fdopen(fd, fmode);
 
     if (s->file == NULL) {
         return destroy(s), (gzFile)Z_NULL;
@@ -136,16 +151,24 @@ local gzFile gz_open (path, mode, fd)
          */
         fprintf(s->file, "%c%c%c%c%c%c%c%c%c%c", gz_magic[0], gz_magic[1],
              Z_DEFLATED, 0 /*flags*/, 0,0,0,0 /*time*/, 0 /*xflags*/, OS_CODE);
+	s->startpos = 10L;
+	/* We use 10L instead of ftell(s->file) to because ftell causes an
+         * fflush on some systems. This version of the library doesn't use
+         * startpos anyway in write mode, so this initialization is not
+         * necessary.
+         */
     } else {
 	check_header(s); /* skip the .gz header */
+	s->startpos = (ftell(s->file) - s->stream.avail_in);
     }
+    
     return (gzFile)s;
 }
 
 /* ===========================================================================
      Opens a gzip (.gz) file for reading or writing.
 */
-gzFile gzopen (path, mode)
+gzFile ZEXPORT gzopen (path, mode)
     const char *path;
     const char *mode;
 {
@@ -156,7 +179,7 @@ gzFile gzopen (path, mode)
      Associate a gzFile with the file descriptor fd. fd is not dup'ed here
    to mimic the behavio(u)r of fdopen.
 */
-gzFile gzdopen (fd, mode)
+gzFile ZEXPORT gzdopen (fd, mode)
     int fd;
     const char *mode;
 {
@@ -168,6 +191,31 @@ gzFile gzdopen (fd, mode)
     return gz_open (name, mode, fd);
 }
 
+/* ===========================================================================
+ * Update the compression level and strategy
+ */
+int ZEXPORT gzsetparams (file, level, strategy)
+    gzFile file;
+    int level;
+    int strategy;
+{
+    gz_stream *s = (gz_stream*)file;
+
+    if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
+
+    /* Make room to allow flushing */
+    if (s->stream.avail_out == 0) {
+
+	s->stream.next_out = s->outbuf;
+	if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {
+	    s->z_err = Z_ERRNO;
+	}
+	s->stream.avail_out = Z_BUFSIZE;
+    }
+
+    return deflateParams (&(s->stream), level, strategy);
+}
+
 /* ===========================================================================
      Read a byte from a gz_stream; update next_in and avail_in. Return EOF
    for end of file.
@@ -212,8 +260,11 @@ local void check_header(s)
     for (len = 0; len < 2; len++) {
 	c = get_byte(s);
 	if (c != gz_magic[len]) {
-	    s->transparent = 1;
+	    if (len != 0) s->stream.avail_in++, s->stream.next_in--;
-	    if (c != EOF) s->stream.avail_in++, s->stream.next_in--;
+	    if (c != EOF) {
+		s->stream.avail_in++, s->stream.next_in--;
+		s->transparent = 1;
+	    }
 	    s->z_err = s->stream.avail_in != 0 ? Z_OK : Z_STREAM_END;
 	    return;
 	}
@@ -260,14 +311,21 @@ local int destroy (s)
     TRYFREE(s->msg);
 
     if (s->stream.state != NULL) {
-       if (s->mode == 'w') {
+	if (s->mode == 'w') {
-           err = deflateEnd(&(s->stream));
+#ifdef NO_DEFLATE
-       } else if (s->mode == 'r') {
+	    err = Z_STREAM_ERROR;
-           err = inflateEnd(&(s->stream));
+#else
-       }
+	    err = deflateEnd(&(s->stream));
+#endif
+	} else if (s->mode == 'r') {
+	    err = inflateEnd(&(s->stream));
+	}
     }
     if (s->file != NULL && fclose(s->file)) {
-        err = Z_ERRNO;
+#ifdef ESPIPE
+	if (errno != ESPIPE) /* fclose is broken for pipes in HP/UX */
+#endif
+	    err = Z_ERRNO;
     }
     if (s->z_err < 0) err = s->z_err;
 
@@ -282,13 +340,13 @@ local int destroy (s)
      Reads the given number of uncompressed bytes from the compressed file.
    gzread returns the number of bytes actually read (0 for end of file).
 */
-int gzread (file, buf, len)
+int ZEXPORT gzread (file, buf, len)
     gzFile file;
     voidp buf;
     unsigned len;
 {
     gz_stream *s = (gz_stream*)file;
-    Bytef *start = buf; /* starting point for crc computation */
+    Bytef *start = (Bytef*)buf; /* starting point for crc computation */
     Byte  *next_out; /* == stream.next_out but not forced far (for MSDOS) */
 
     if (s == NULL || s->mode != 'r') return Z_STREAM_ERROR;
@@ -296,7 +354,8 @@ int gzread (file, buf, len)
     if (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO) return -1;
     if (s->z_err == Z_STREAM_END) return 0;  /* EOF */
 
-    s->stream.next_out = next_out = buf;
+    next_out = (Byte*)buf;
+    s->stream.next_out = (Bytef*)buf;
     s->stream.avail_out = len;
 
     while (s->stream.avail_out != 0) {
@@ -317,7 +376,10 @@ int gzread (file, buf, len)
 		s->stream.avail_out -= fread(next_out, 1, s->stream.avail_out,
 					     s->file);
 	    }
-	    return (int)(len - s->stream.avail_out);
+	    len -= s->stream.avail_out;
+	    s->stream.total_in  += (uLong)len;
+	    s->stream.total_out += (uLong)len;
+	    return (int)len;
 	}
         if (s->stream.avail_in == 0 && !s->z_eof) {
 
@@ -345,7 +407,12 @@ int gzread (file, buf, len)
 		/* Check for concatenated .gz files: */
 		check_header(s);
 		if (s->z_err == Z_OK) {
+		    uLong total_in = s->stream.total_in;
+		    uLong total_out = s->stream.total_out;
+
 		    inflateReset(&(s->stream));
+		    s->stream.total_in = total_in;
+		    s->stream.total_out = total_out;
 		    s->crc = crc32(0L, Z_NULL, 0);
 		}
 	    }
@@ -357,11 +424,49 @@ int gzread (file, buf, len)
     return (int)(len - s->stream.avail_out);
 }
 
+
+/* ===========================================================================
+      Reads one byte from the compressed file. gzgetc returns this byte
+   or -1 in case of end of file or error.
+*/
+int ZEXPORT gzgetc(file)
+    gzFile file;
+{
+    unsigned char c;
+
+    return gzread(file, &c, 1) == 1 ? c : -1;
+}
+
+
+/* ===========================================================================
+      Reads bytes from the compressed file until len-1 characters are
+   read, or a newline character is read and transferred to buf, or an
+   end-of-file condition is encountered.  The string is then terminated
+   with a null character.
+      gzgets returns buf, or Z_NULL in case of error.
+
+      The current implementation is not optimized at all.
+*/
+char * ZEXPORT gzgets(file, buf, len)
+    gzFile file;
+    char *buf;
+    int len;
+{
+    char *b = buf;
+    if (buf == Z_NULL || len <= 0) return Z_NULL;
+
+    while (--len > 0 && gzread(file, buf, 1) == 1 && *buf++ != '\n') ;
+    *buf = '\0';
+    return b == buf && len > 0 ? Z_NULL : b;
+}
+
+
+#ifndef NO_DEFLATE
 /* ===========================================================================
      Writes the given number of uncompressed bytes into the compressed file.
    gzwrite returns the number of bytes actually written (0 in case of error).
 */
-int gzwrite (file, buf, len)
+int ZEXPORT gzwrite (file, buf, len)
     gzFile file;
     const voidp buf;
     unsigned len;
@@ -370,7 +475,7 @@ int gzwrite (file, buf, len)
 
     if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
 
-    s->stream.next_in = buf;
+    s->stream.next_in = (Bytef*)buf;
     s->stream.avail_in = len;
 
     while (s->stream.avail_in != 0) {
@@ -387,18 +492,95 @@ int gzwrite (file, buf, len)
         s->z_err = deflate(&(s->stream), Z_NO_FLUSH);
         if (s->z_err != Z_OK) break;
     }
-    s->crc = crc32(s->crc, buf, len);
+    s->crc = crc32(s->crc, (const Bytef *)buf, len);
 
     return (int)(len - s->stream.avail_in);
 }
 
+/* ===========================================================================
+     Converts, formats, and writes the args to the compressed file under
+   control of the format string, as in fprintf. gzprintf returns the number of
+   uncompressed bytes actually written (0 in case of error).
+*/
+#ifdef STDC
+#include <stdarg.h>
+
+int ZEXPORTVA gzprintf (gzFile file, const char *format, /* args */ ...)
+{
+    char buf[Z_PRINTF_BUFSIZE];
+    va_list va;
+    int len;
+
+    va_start(va, format);
+#ifdef HAS_vsnprintf
+    (void)vsnprintf(buf, sizeof(buf), format, va);
+#else
+    (void)vsprintf(buf, format, va);
+#endif
+    va_end(va);
+    len = strlen(buf); /* some *sprintf don't return the nb of bytes written */
+    if (len <= 0) return 0;
+
+    return gzwrite(file, buf, (unsigned)len);
+}
+#else /* not ANSI C */
+
+int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
+	               a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
+    gzFile file;
+    const char *format;
+    int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
+	a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
+{
+    char buf[Z_PRINTF_BUFSIZE];
+    int len;
+
+#ifdef HAS_snprintf
+    snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8,
+	     a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+#else
+    sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8,
+	    a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+#endif
+    len = strlen(buf); /* old sprintf doesn't return the nb of bytes written */
+    if (len <= 0) return 0;
+
+    return gzwrite(file, buf, len);
+}
+#endif
+
+/* ===========================================================================
+      Writes c, converted to an unsigned char, into the compressed file.
+   gzputc returns the value that was written, or -1 in case of error.
+*/
+int ZEXPORT gzputc(file, c)
+    gzFile file;
+    int c;
+{
+    unsigned char cc = (unsigned char) c; /* required for big endian systems */
+
+    return gzwrite(file, &cc, 1) == 1 ? (int)cc : -1;
+}
+
+
+/* ===========================================================================
+      Writes the given null-terminated string to the compressed file, excluding
+   the terminating null character.
+      gzputs returns the number of characters written, or -1 in case of error.
+*/
+int ZEXPORT gzputs(file, s)
+    gzFile file;
+    const char *s;
+{
+    return gzwrite(file, (const voidp)s, (unsigned)strlen(s));
+}
+
+
 /* ===========================================================================
      Flushes all pending output into the compressed file. The parameter
    flush is as in the deflate() function.
-     gzflush should be called only when strictly necessary because it can
-   degrade compression.
 */
-int gzflush (file, flush)
+local int do_flush (file, flush)
     gzFile file;
     int flush;
 {
@@ -424,6 +606,9 @@ int gzflush (file, flush)
         if (done) break;
         s->z_err = deflate(&(s->stream), flush);
 
+	/* Ignore the second of two consecutive flushes: */
+	if (len == 0 && s->z_err == Z_BUF_ERROR) s->z_err = Z_OK;
+
         /* deflate has finished flushing only when it hasn't used up
          * all the available space in the output buffer: 
          */
@@ -431,9 +616,154 @@ int gzflush (file, flush)
  
         if (s->z_err != Z_OK && s->z_err != Z_STREAM_END) break;
     }
+    return  s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
+}
+
+int ZEXPORT gzflush (file, flush)
+     gzFile file;
+     int flush;
+{
+    gz_stream *s = (gz_stream*)file;
+    int err = do_flush (file, flush);
+
+    if (err) return err;
     fflush(s->file);
     return  s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
 }
+#endif /* NO_DEFLATE */
+
+/* ===========================================================================
+      Sets the starting position for the next gzread or gzwrite on the given
+   compressed file. The offset represents a number of bytes in the
+      gzseek returns the resulting offset location as measured in bytes from
+   the beginning of the uncompressed stream, or -1 in case of error.
+      SEEK_END is not implemented, returns error.
+      In this version of the library, gzseek can be extremely slow.
+*/
+z_off_t ZEXPORT gzseek (file, offset, whence)
+    gzFile file;
+    z_off_t offset;
+    int whence;
+{
+    gz_stream *s = (gz_stream*)file;
+
+    if (s == NULL || whence == SEEK_END ||
+	s->z_err == Z_ERRNO || s->z_err == Z_DATA_ERROR) {
+	return -1L;
+    }
+    
+    if (s->mode == 'w') {
+#ifdef NO_DEFLATE
+	return -1L;
+#else
+	if (whence == SEEK_SET) {
+	    offset -= s->stream.total_out;
+	}
+	if (offset < 0) return -1L;
+
+	/* At this point, offset is the number of zero bytes to write. */
+	if (s->inbuf == Z_NULL) {
+	    s->inbuf = (Byte*)ALLOC(Z_BUFSIZE); /* for seeking */
+	    zmemzero(s->inbuf, Z_BUFSIZE);
+	}
+	while (offset > 0)  {
+	    uInt size = Z_BUFSIZE;
+	    if (offset < Z_BUFSIZE) size = (uInt)offset;
+
+	    size = gzwrite(file, s->inbuf, size);
+	    if (size == 0) return -1L;
+
+	    offset -= size;
+	}
+	return (z_off_t)s->stream.total_in;
+#endif
+    }
+    /* Rest of function is for reading only */
+
+    /* compute absolute position */
+    if (whence == SEEK_CUR) {
+	offset += s->stream.total_out;
+    }
+    if (offset < 0) return -1L;
+
+    if (s->transparent) {
+	/* map to fseek */
+	s->stream.avail_in = 0;
+	s->stream.next_in = s->inbuf;
+        if (fseek(s->file, offset, SEEK_SET) < 0) return -1L;
+
+	s->stream.total_in = s->stream.total_out = (uLong)offset;
+	return offset;
+    }
+
+    /* For a negative seek, rewind and use positive seek */
+    if ((uLong)offset >= s->stream.total_out) {
+	offset -= s->stream.total_out;
+    } else if (gzrewind(file) < 0) {
+	return -1L;
+    }
+    /* offset is now the number of bytes to skip. */
+
+    if (offset != 0 && s->outbuf == Z_NULL) {
+	s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
+    }
+    while (offset > 0)  {
+	int size = Z_BUFSIZE;
+	if (offset < Z_BUFSIZE) size = (int)offset;
+
+	size = gzread(file, s->outbuf, (uInt)size);
+	if (size <= 0) return -1L;
+	offset -= size;
+    }
+    return (z_off_t)s->stream.total_out;
+}
+
+/* ===========================================================================
+     Rewinds input file. 
+*/
+int ZEXPORT gzrewind (file)
+    gzFile file;
+{
+    gz_stream *s = (gz_stream*)file;
+    
+    if (s == NULL || s->mode != 'r') return -1;
+
+    s->z_err = Z_OK;
+    s->z_eof = 0;
+    s->stream.avail_in = 0;
+    s->stream.next_in = s->inbuf;
+	
+    if (s->startpos == 0) { /* not a compressed file */
+	rewind(s->file);
+	return 0;
+    }
+
+    (void) inflateReset(&s->stream);
+    return fseek(s->file, s->startpos, SEEK_SET);
+}
+
+/* ===========================================================================
+     Returns the starting position for the next gzread or gzwrite on the
+   given compressed file. This position represents a number of bytes in the
+   uncompressed data stream.
+*/
+z_off_t ZEXPORT gztell (file)
+    gzFile file;
+{
+    return gzseek(file, 0L, SEEK_CUR);
+}
+
+/* ===========================================================================
+     Returns 1 when EOF has previously been detected reading the given
+   input stream, otherwise zero.
+*/
+int ZEXPORT gzeof (file)
+    gzFile file;
+{
+    gz_stream *s = (gz_stream*)file;
+    
+    return (s == NULL || s->mode != 'r') ? 0 : s->z_eof;
+}
 
 /* ===========================================================================
    Outputs a long in LSB order to the given file
@@ -470,7 +800,7 @@ local uLong getLong (s)
      Flushes all pending output if necessary, closes the compressed file
    and deallocates all the (de)compression state.
 */
-int gzclose (file)
+int ZEXPORT gzclose (file)
     gzFile file;
 {
     int err;
@@ -479,14 +809,17 @@ int gzclose (file)
     if (s == NULL) return Z_STREAM_ERROR;
 
     if (s->mode == 'w') {
-        err = gzflush (file, Z_FINISH);
+#ifdef NO_DEFLATE
-        if (err != Z_OK) return destroy(file);
+	return Z_STREAM_ERROR;
+#else
+        err = do_flush (file, Z_FINISH);
+        if (err != Z_OK) return destroy((gz_stream*)file);
 
         putLong (s->file, s->crc);
         putLong (s->file, s->stream.total_in);
-
+#endif
     }
-    return destroy(file);
+    return destroy((gz_stream*)file);
 }
 
 /* ===========================================================================
@@ -496,7 +829,7 @@ int gzclose (file)
    errnum is set to Z_ERRNO and the application may consult errno
    to get the exact error code.
 */
-const char*  gzerror (file, errnum)
+const char*  ZEXPORT gzerror (file, errnum)
     gzFile file;
     int *errnum;
 {

infblock.c

@@ -66,23 +66,19 @@ inflate_blocks_statef *s;
 z_streamp z;
 uLongf *c;
 {
-  if (s->checkfn != Z_NULL)
+  if (c != Z_NULL)
     *c = s->check;
   if (s->mode == BTREE || s->mode == DTREE)
     ZFREE(z, s->sub.trees.blens);
   if (s->mode == CODES)
-  {
     inflate_codes_free(s->sub.decode.codes, z);
-    inflate_trees_free(s->sub.decode.td, z);
-    inflate_trees_free(s->sub.decode.tl, z);
-  }
   s->mode = TYPE;
   s->bitk = 0;
   s->bitb = 0;
   s->read = s->write = s->window;
   if (s->checkfn != Z_NULL)
-    z->adler = s->check = (*s->checkfn)(0L, Z_NULL, 0);
+    z->adler = s->check = (*s->checkfn)(0L, (const Bytef *)Z_NULL, 0);
-  Trace((stderr, "inflate:   blocks reset\n"));
+  Tracev((stderr, "inflate:   blocks reset\n"));
 }
 
 
@@ -96,23 +92,27 @@ uInt w;
   if ((s = (inflate_blocks_statef *)ZALLOC
        (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL)
     return s;
+  if ((s->hufts =
+       (inflate_huft *)ZALLOC(z, sizeof(inflate_huft), MANY)) == Z_NULL)
+  {
+    ZFREE(z, s);
+    return Z_NULL;
+  }
   if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL)
   {
+    ZFREE(z, s->hufts);
     ZFREE(z, s);
     return Z_NULL;
   }
   s->end = s->window + w;
   s->checkfn = c;
   s->mode = TYPE;
-  Trace((stderr, "inflate:   blocks allocated\n"));
+  Tracev((stderr, "inflate:   blocks allocated\n"));
-  inflate_blocks_reset(s, z, &s->check);
+  inflate_blocks_reset(s, z, Z_NULL);
   return s;
 }
 
 
-#ifdef DEBUG
-  extern uInt inflate_hufts;
-#endif
 int inflate_blocks(s, z, r)
 inflate_blocks_statef *s;
 z_streamp z;
@@ -139,7 +139,7 @@ int r;
       switch (t >> 1)
       {
         case 0:                         /* stored */
-          Trace((stderr, "inflate:     stored block%s\n",
+          Tracev((stderr, "inflate:     stored block%s\n",
                  s->last ? " (last)" : ""));
           DUMPBITS(3)
           t = k & 7;                    /* go to byte boundary */
@@ -147,27 +147,25 @@ int r;
           s->mode = LENS;               /* get length of stored block */
           break;
         case 1:                         /* fixed */
-          Trace((stderr, "inflate:     fixed codes block%s\n",
+          Tracev((stderr, "inflate:     fixed codes block%s\n",
                  s->last ? " (last)" : ""));
           {
             uInt bl, bd;
             inflate_huft *tl, *td;
 
-            inflate_trees_fixed(&bl, &bd, &tl, &td);
+            inflate_trees_fixed(&bl, &bd, &tl, &td, z);
             s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z);
             if (s->sub.decode.codes == Z_NULL)
             {
               r = Z_MEM_ERROR;
               LEAVE
             }
-            s->sub.decode.tl = Z_NULL;  /* don't try to free these */
-            s->sub.decode.td = Z_NULL;
           }
           DUMPBITS(3)
           s->mode = CODES;
           break;
         case 2:                         /* dynamic */
-          Trace((stderr, "inflate:     dynamic codes block%s\n",
+          Tracev((stderr, "inflate:     dynamic codes block%s\n",
                  s->last ? " (last)" : ""));
           DUMPBITS(3)
           s->mode = TABLE;
@@ -244,7 +242,7 @@ int r;
         s->sub.trees.blens[border[s->sub.trees.index++]] = 0;
       s->sub.trees.bb = 7;
       t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb,
-                             &s->sub.trees.tb, z);
+                             &s->sub.trees.tb, s->hufts, z);
       if (t != Z_OK)
       {
         ZFREE(z, s->sub.trees.blens);
@@ -286,7 +284,6 @@ int r;
           if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||
               (c == 16 && i < 1))
           {
-            inflate_trees_free(s->sub.trees.tb, z);
             ZFREE(z, s->sub.trees.blens);
             s->mode = BAD;
             z->msg = (char*)"invalid bit length repeat";
@@ -300,7 +297,6 @@ int r;
           s->sub.trees.index = i;
         }
       }
-      inflate_trees_free(s->sub.trees.tb, z);
       s->sub.trees.tb = Z_NULL;
       {
         uInt bl, bd;
@@ -310,11 +306,9 @@ int r;
         bl = 9;         /* must be <= 9 for lookahead assumptions */
         bd = 6;         /* must be <= 9 for lookahead assumptions */
         t = s->sub.trees.table;
-#ifdef DEBUG
-      inflate_hufts = 0;
-#endif
         t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f),
-                                  s->sub.trees.blens, &bl, &bd, &tl, &td, z);
+                                  s->sub.trees.blens, &bl, &bd, &tl, &td,
+                                  s->hufts, z);
         ZFREE(z, s->sub.trees.blens);
         if (t != Z_OK)
         {
@@ -323,18 +317,13 @@ int r;
           r = t;
           LEAVE
         }
-        Tracev((stderr, "inflate:       trees ok, %d * %d bytes used\n",
+        Tracev((stderr, "inflate:       trees ok\n"));
-              inflate_hufts, sizeof(inflate_huft)));
         if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL)
         {
-          inflate_trees_free(td, z);
-          inflate_trees_free(tl, z);
           r = Z_MEM_ERROR;
           LEAVE
         }
         s->sub.decode.codes = c;
-        s->sub.decode.tl = tl;
-        s->sub.decode.td = td;
       }
       s->mode = CODES;
     case CODES:
@@ -343,8 +332,6 @@ int r;
         return inflate_flush(s, z, r);
       r = Z_OK;
       inflate_codes_free(s->sub.decode.codes, z);
-      inflate_trees_free(s->sub.decode.td, z);
-      inflate_trees_free(s->sub.decode.tl, z);
       LOAD
       Tracev((stderr, "inflate:       codes end, %lu total out\n",
               z->total_out + (q >= s->read ? q - s->read :
@@ -380,15 +367,15 @@ int r;
 }
 
 
-int inflate_blocks_free(s, z, c)
+int inflate_blocks_free(s, z)
 inflate_blocks_statef *s;
 z_streamp z;
-uLongf *c;
 {
-  inflate_blocks_reset(s, z, c);
+  inflate_blocks_reset(s, z, Z_NULL);
   ZFREE(z, s->window);
+  ZFREE(z, s->hufts);
   ZFREE(z, s);
-  Trace((stderr, "inflate:   blocks freed\n"));
+  Tracev((stderr, "inflate:   blocks freed\n"));
   return Z_OK;
 }
 
@@ -398,6 +385,17 @@ inflate_blocks_statef *s;
 const Bytef *d;
 uInt  n;
 {
-  zmemcpy((charf *)s->window, d, n);
+  zmemcpy(s->window, d, n);
   s->read = s->write = s->window + n;
 }
+
+
+/* Returns true if inflate is currently at the end of a block generated
+ * by Z_SYNC_FLUSH or Z_FULL_FLUSH. 
+ * IN assertion: s != Z_NULL
+ */
+int inflate_blocks_sync_point(s)
+inflate_blocks_statef *s;
+{
+  return s->mode == LENS;
+}

infblock.h

@@ -1,5 +1,5 @@
 /* infblock.h -- header to use infblock.c
- * Copyright (C) 1995-1996 Mark Adler
+ * Copyright (C) 1995-1998 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -28,10 +28,12 @@ extern void inflate_blocks_reset OF((
 
 extern int inflate_blocks_free OF((
     inflate_blocks_statef *,
-    z_streamp ,
+    z_streamp));
-    uLongf *));                  /* check value on output */
 
 extern void inflate_set_dictionary OF((
     inflate_blocks_statef *s,
     const Bytef *d,  /* dictionary */
     uInt  n));       /* dictionary length */
+
+extern int inflate_blocks_sync_point OF((
+    inflate_blocks_statef *s));

infcodes.c

@@ -1,5 +1,5 @@
 /* infcodes.c -- process literals and length/distance pairs
- * Copyright (C) 1995-1996 Mark Adler
+ * Copyright (C) 1995-1998 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -16,11 +16,7 @@
 #define exop word.what.Exop
 #define bits word.what.Bits
 
-/* inflate codes private state */
+typedef enum {        /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
-struct inflate_codes_state {
-
-  /* mode */
-  enum {        /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
       START,    /* x: set up for LEN */
       LEN,      /* i: get length/literal/eob next */
       LENEXT,   /* i: getting length extra (have base) */
@@ -31,7 +27,13 @@ struct inflate_codes_state {
       WASH,     /* o: got eob, possibly still output waiting */
       END,      /* x: got eob and all data flushed */
       BADCODE}  /* x: got error */
-    mode;               /* current inflate_codes mode */
+inflate_codes_mode;
+
+/* inflate codes private state */
+struct inflate_codes_state {
+
+  /* mode */
+  inflate_codes_mode mode;      /* current inflate_codes mode */
 
   /* mode dependent information */
   uInt len;
@@ -235,6 +237,9 @@ int r;
       r = Z_STREAM_ERROR;
       LEAVE
   }
+#ifdef NEED_DUMMY_RETURN
+  return Z_STREAM_ERROR;  /* Some dumb compilers complain without this */
+#endif
 }
 
 

infcodes.h

@@ -1,5 +1,5 @@
 /* infcodes.h -- header to use infcodes.c
- * Copyright (C) 1995-1996 Mark Adler
+ * Copyright (C) 1995-1998 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 

inffast.c

@@ -1,5 +1,5 @@
 /* inffast.c -- process literals and length/distance pairs fast
- * Copyright (C) 1995-1996 Mark Adler
+ * Copyright (C) 1995-1998 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 

inffast.h

@@ -1,5 +1,5 @@
 /* inffast.h -- header to use inffast.c
- * Copyright (C) 1995-1996 Mark Adler
+ * Copyright (C) 1995-1998 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 

inflate.c

@@ -1,5 +1,5 @@
 /* inflate.c -- zlib interface to inflate modules
- * Copyright (C) 1995-1996 Mark Adler
+ * Copyright (C) 1995-1998 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -8,11 +8,7 @@
 
 struct inflate_blocks_state {int dummy;}; /* for buggy compilers */
 
-/* inflate private state */
+typedef enum {
-struct internal_state {
-
-  /* mode */
-  enum {
       METHOD,   /* waiting for method byte */
       FLAG,     /* waiting for flag byte */
       DICT4,    /* four dictionary check bytes to go */
@@ -27,7 +23,13 @@ struct internal_state {
       CHECK1,   /* one check byte to go */
       DONE,     /* finished check, done */
       BAD}      /* got an error--stay here */
-    mode;               /* current inflate mode */
+inflate_mode;
+
+/* inflate private state */
+struct internal_state {
+
+  /* mode */
+  inflate_mode  mode;   /* current inflate mode */
 
   /* mode dependent information */
   union {
@@ -48,39 +50,35 @@ struct internal_state {
 };
 
 
-int inflateReset(z)
+int ZEXPORT inflateReset(z)
 z_streamp z;
 {
-  uLong c;
-
   if (z == Z_NULL || z->state == Z_NULL)
     return Z_STREAM_ERROR;
   z->total_in = z->total_out = 0;
   z->msg = Z_NULL;
   z->state->mode = z->state->nowrap ? BLOCKS : METHOD;
-  inflate_blocks_reset(z->state->blocks, z, &c);
+  inflate_blocks_reset(z->state->blocks, z, Z_NULL);
-  Trace((stderr, "inflate: reset\n"));
+  Tracev((stderr, "inflate: reset\n"));
   return Z_OK;
 }
 
 
-int inflateEnd(z)
+int ZEXPORT inflateEnd(z)
 z_streamp z;
 {
-  uLong c;
-
   if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)
     return Z_STREAM_ERROR;
   if (z->state->blocks != Z_NULL)
-    inflate_blocks_free(z->state->blocks, z, &c);
+    inflate_blocks_free(z->state->blocks, z);
   ZFREE(z, z->state);
   z->state = Z_NULL;
-  Trace((stderr, "inflate: end\n"));
+  Tracev((stderr, "inflate: end\n"));
   return Z_OK;
 }
 
 
-int inflateInit2_(z, w, version, stream_size)
+int ZEXPORT inflateInit2_(z, w, version, stream_size)
 z_streamp z;
 int w;
 const char *version;
@@ -129,7 +127,7 @@ int stream_size;
     inflateEnd(z);
     return Z_MEM_ERROR;
   }
-  Trace((stderr, "inflate: allocated\n"));
+  Tracev((stderr, "inflate: allocated\n"));
 
   /* reset state */
   inflateReset(z);
@@ -137,7 +135,7 @@ int stream_size;
 }
 
 
-int inflateInit_(z, version, stream_size)
+int ZEXPORT inflateInit_(z, version, stream_size)
 z_streamp z;
 const char *version;
 int stream_size;
@@ -146,18 +144,19 @@ int stream_size;
 }
 
 
-#define NEEDBYTE {if(z->avail_in==0)return r;r=Z_OK;}
+#define NEEDBYTE {if(z->avail_in==0)return r;r=f;}
 #define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)
 
-int inflate(z, f)
+int ZEXPORT inflate(z, f)
 z_streamp z;
 int f;
 {
   int r;
   uInt b;
 
-  if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL || f < 0)
+  if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL)
     return Z_STREAM_ERROR;
+  f = f == Z_FINISH ? Z_BUF_ERROR : Z_OK;
   r = Z_BUF_ERROR;
   while (1) switch (z->state->mode)
   {
@@ -188,11 +187,11 @@ int f;
         z->state->sub.marker = 5;       /* can't try inflateSync */
         break;
       }
-      Trace((stderr, "inflate: zlib header ok\n"));
+      Tracev((stderr, "inflate: zlib header ok\n"));
       if (!(b & PRESET_DICT))
       {
         z->state->mode = BLOCKS;
-	break;
+        break;
       }
       z->state->mode = DICT4;
     case DICT4:
@@ -226,9 +225,11 @@ int f;
         z->state->sub.marker = 0;       /* can try inflateSync */
         break;
       }
+      if (r == Z_OK)
+        r = f;
       if (r != Z_STREAM_END)
         return r;
-      r = Z_OK;
+      r = f;
       inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
       if (z->state->nowrap)
       {
@@ -259,7 +260,7 @@ int f;
         z->state->sub.marker = 5;       /* can't try inflateSync */
         break;
       }
-      Trace((stderr, "inflate: zlib check ok\n"));
+      Tracev((stderr, "inflate: zlib check ok\n"));
       z->state->mode = DONE;
     case DONE:
       return Z_STREAM_END;
@@ -268,10 +269,13 @@ int f;
     default:
       return Z_STREAM_ERROR;
   }
+#ifdef NEED_DUMMY_RETURN
+  return Z_STREAM_ERROR;  /* Some dumb compilers complain without this */
+#endif
 }
 
 
-int inflateSetDictionary(z, dictionary, dictLength)
+int ZEXPORT inflateSetDictionary(z, dictionary, dictLength)
 z_streamp z;
 const Bytef *dictionary;
 uInt  dictLength;
@@ -295,7 +299,7 @@ uInt  dictLength;
 }
 
 
-int inflateSync(z)
+int ZEXPORT inflateSync(z)
 z_streamp z;
 {
   uInt n;       /* number of bytes to look at */
@@ -319,7 +323,8 @@ z_streamp z;
   /* search */
   while (n && m < 4)
   {
-    if (*p == (Byte)(m < 2 ? 0 : 0xff))
+    static const Byte mark[4] = {0, 0, 0xff, 0xff};
+    if (*p == mark[m])
       m++;
     else if (*p)
       m = 0;
@@ -343,3 +348,19 @@ z_streamp z;
   z->state->mode = BLOCKS;
   return Z_OK;
 }
+
+
+/* Returns true if inflate is currently at the end of a block generated
+ * by Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP
+ * implementation to provide an additional safety check. PPP uses Z_SYNC_FLUSH
+ * but removes the length bytes of the resulting empty stored block. When
+ * decompressing, PPP checks that at the end of input packet, inflate is
+ * waiting for these length bytes.
+ */
+int ZEXPORT inflateSyncPoint(z)
+z_streamp z;
+{
+  if (z == Z_NULL || z->state == Z_NULL || z->state->blocks == Z_NULL)
+    return Z_STREAM_ERROR;
+  return inflate_blocks_sync_point(z->state->blocks);
+}

inftrees.c

@@ -6,7 +6,8 @@
 #include "zutil.h"
 #include "inftrees.h"
 
-char inflate_copyright[] = " inflate 1.0.5 Copyright 1995-1998 Mark Adler ";
+const char inflate_copyright[] =
+   " inflate 1.1.1 Copyright 1995-1998 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -30,12 +31,9 @@ local int huft_build OF((
     const uIntf *,      /* list of extra bits for non-simple codes */
     inflate_huft * FAR*,/* result: starting table */
     uIntf *,            /* maximum lookup bits (returns actual) */
-    z_streamp ));       /* for zalloc function */
+    inflate_huft *,     /* space for trees */
-
+    uInt *,             /* hufts used in space */
-local voidpf falloc OF((
+    uIntf * ));         /* space for values */
-    voidpf,             /* opaque pointer (not used) */
-    uInt,               /* number of items */
-    uInt));             /* size of item */
 
 /* Tables for deflate from PKZIP's appnote.txt. */
 local const uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */
@@ -89,21 +87,18 @@ local const uInt cpdext[30] = { /* Extra bits for distance codes */
 
 /* If BMAX needs to be larger than 16, then h and x[] should be uLong. */
 #define BMAX 15         /* maximum bit length of any code */
-#define N_MAX 288       /* maximum number of codes in any set */
 
-#ifdef DEBUG
+local int huft_build(b, n, s, d, e, t, m, hp, hn, v)
-  uInt inflate_hufts;
-#endif
-
-local int huft_build(b, n, s, d, e, t, m, zs)
 uIntf *b;               /* code lengths in bits (all assumed <= BMAX) */
-uInt n;                 /* number of codes (assumed <= N_MAX) */
+uInt n;                 /* number of codes (assumed <= 288) */
 uInt s;                 /* number of simple-valued codes (0..s-1) */
 const uIntf *d;         /* list of base values for non-simple codes */
 const uIntf *e;         /* list of extra bits for non-simple codes */
 inflate_huft * FAR *t;  /* result: starting table */
 uIntf *m;               /* maximum lookup bits, returns actual */
-z_streamp zs;           /* for zalloc function */
+inflate_huft *hp;       /* space for trees */
+uInt *hn;               /* hufts used in space */
+uIntf *v;               /* working area: values in order of bit length */
 /* Given a list of code lengths and a maximum table size, make a set of
    tables to decode that set of codes.  Return Z_OK on success, Z_BUF_ERROR
    if the given code set is incomplete (the tables are still built in this
@@ -120,11 +115,11 @@ z_streamp zs;           /* for zalloc function */
   register uInt j;              /* counter */
   register int k;               /* number of bits in current code */
   int l;                        /* bits per table (returned in m) */
+  uInt mask;                    /* (1 << w) - 1, to avoid cc -O bug on HP */
   register uIntf *p;            /* pointer into c[], b[], or v[] */
   inflate_huft *q;              /* points to current table */
   struct inflate_huft_s r;      /* table entry for structure assignment */
   inflate_huft *u[BMAX];        /* table stack */
-  uInt v[N_MAX];                /* values in order of bit length */
   register int w;               /* bits before this table == (l * h) */
   uInt x[BMAX+1];               /* bit offsets, then code stack */
   uIntf *xp;                    /* pointer into x */
@@ -232,20 +227,16 @@ z_streamp zs;           /* for zalloc function */
         }
         z = 1 << j;             /* table entries for j-bit table */
 
-        /* allocate and link in new table */
+        /* allocate new table */
-        if ((q = (inflate_huft *)ZALLOC
+        if (*hn + z > MANY)     /* (note: doesn't matter for fixed) */
-             (zs,z + 1,sizeof(inflate_huft))) == Z_NULL)
-        {
-          if (h)
-            inflate_trees_free(u[0], zs);
           return Z_MEM_ERROR;   /* not enough memory */
+        u[h] = q = hp + *hn;
+        *hn += z;
+        if (t != Z_NULL)        /* first table is returned result */
+        {
+          *t = q;
+          t = Z_NULL;
         }
-#ifdef DEBUG
-        inflate_hufts += z + 1;
-#endif
-        *t = q + 1;             /* link to list for huft_free() */
-        *(t = &(q->next)) = Z_NULL;
-        u[h] = ++q;             /* table starts after link */
 
         /* connect to last table, if there is one */
         if (h)
@@ -285,10 +276,12 @@ z_streamp zs;           /* for zalloc function */
       i ^= j;
 
       /* backup over finished tables */
-      while ((i & ((1 << w) - 1)) != x[h])
+      mask = (1 << w) - 1;      /* needed on HP, cc -O bug */
+      while ((i & mask) != x[h])
       {
         h--;                    /* don't need to update q */
         w -= l;
+        mask = (1 << w) - 1;
       }
     }
   }
@@ -299,28 +292,34 @@ z_streamp zs;           /* for zalloc function */
 }
 
 
-int inflate_trees_bits(c, bb, tb, z)
+int inflate_trees_bits(c, bb, tb, hp, z)
 uIntf *c;               /* 19 code lengths */
 uIntf *bb;              /* bits tree desired/actual depth */
 inflate_huft * FAR *tb; /* bits tree result */
-z_streamp z;            /* for zfree function */
+inflate_huft *hp;       /* space for trees */
+z_streamp z;            /* for messages */
 {
   int r;
+  uInt hn = 0;          /* hufts used in space */
+  uIntf *v;             /* work area for huft_build */
 
-  r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, tb, bb, z);
+  if ((v = (uIntf*)ZALLOC(z, 19, sizeof(uInt))) == Z_NULL)
+    return Z_MEM_ERROR;
+  r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL,
+                 tb, bb, hp, &hn, v);
   if (r == Z_DATA_ERROR)
     z->msg = (char*)"oversubscribed dynamic bit lengths tree";
   else if (r == Z_BUF_ERROR || *bb == 0)
   {
-    inflate_trees_free(*tb, z);
     z->msg = (char*)"incomplete dynamic bit lengths tree";
     r = Z_DATA_ERROR;
   }
+  ZFREE(z, v);
   return r;
 }
 
 
-int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, z)
+int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, hp, z)
 uInt nl;                /* number of literal/length codes */
 uInt nd;                /* number of distance codes */
 uIntf *c;               /* that many (total) code lengths */
@@ -328,27 +327,34 @@ uIntf *bl;              /* literal desired/actual bit depth */
 uIntf *bd;              /* distance desired/actual bit depth */
 inflate_huft * FAR *tl; /* literal/length tree result */
 inflate_huft * FAR *td; /* distance tree result */
-z_streamp z;            /* for zfree function */
+inflate_huft *hp;       /* space for trees */
+z_streamp z;            /* for messages */
 {
   int r;
+  uInt hn = 0;          /* hufts used in space */
+  uIntf *v;             /* work area for huft_build */
+
+  /* allocate work area */
+  if ((v = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
+    return Z_MEM_ERROR;
 
   /* build literal/length tree */
-  r = huft_build(c, nl, 257, cplens, cplext, tl, bl, z);
+  r = huft_build(c, nl, 257, cplens, cplext, tl, bl, hp, &hn, v);
   if (r != Z_OK || *bl == 0)
   {
     if (r == Z_DATA_ERROR)
       z->msg = (char*)"oversubscribed literal/length tree";
     else if (r != Z_MEM_ERROR)
     {
-      inflate_trees_free(*tl, z);
       z->msg = (char*)"incomplete literal/length tree";
       r = Z_DATA_ERROR;
     }
+    ZFREE(z, v);
     return r;
   }
 
   /* build distance tree */
-  r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, z);
+  r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, hp, &hn, v);
   if (r != Z_OK || (*bd == 0 && nl > 257))
   {
     if (r == Z_DATA_ERROR)
@@ -358,7 +364,6 @@ z_streamp z;            /* for zfree function */
       r = Z_OK;
     }
 #else
-      inflate_trees_free(*td, z);
       z->msg = (char*)"incomplete distance tree";
       r = Z_DATA_ERROR;
     }
@@ -367,19 +372,20 @@ z_streamp z;            /* for zfree function */
       z->msg = (char*)"empty distance tree with lengths";
       r = Z_DATA_ERROR;
     }
-    inflate_trees_free(*tl, z);
+    ZFREE(z, v);
     return r;
 #endif
   }
 
   /* done */
+  ZFREE(z, v);
   return Z_OK;
 }
 
 
 /* build fixed tables only once--keep them here */
 local int fixed_built = 0;
-#define FIXEDH 530      /* number of hufts used by fixed tables */
+#define FIXEDH 424      /* number of hufts used by fixed tables */
 local inflate_huft fixed_mem[FIXEDH];
 local uInt fixed_bl;
 local uInt fixed_bd;
@@ -387,36 +393,29 @@ local inflate_huft *fixed_tl;
 local inflate_huft *fixed_td;
 
 
-local voidpf falloc(q, n, s)
+int inflate_trees_fixed(bl, bd, tl, td, z)
-voidpf q;       /* opaque pointer */
-uInt n;         /* number of items */
-uInt s;         /* size of item */
-{
-  Assert(s == sizeof(inflate_huft) && n <= *(intf *)q,
-         "inflate_trees falloc overflow");
-  *(intf *)q -= n+s-s; /* s-s to avoid warning */
-  return (voidpf)(fixed_mem + *(intf *)q);
-}
-
-
-int inflate_trees_fixed(bl, bd, tl, td)
 uIntf *bl;               /* literal desired/actual bit depth */
 uIntf *bd;               /* distance desired/actual bit depth */
 inflate_huft * FAR *tl;  /* literal/length tree result */
 inflate_huft * FAR *td;  /* distance tree result */
+z_streamp z;             /* for memory allocation */
 {
   /* build fixed tables if not already (multiple overlapped executions ok) */
   if (!fixed_built)
   {
     int k;              /* temporary variable */
-    unsigned c[288];    /* length list for huft_build */
+    uInt f = 0;         /* number of hufts used in fixed_mem */
-    z_stream z;         /* for falloc function */
+    uIntf *c;           /* length list for huft_build */
-    int f = FIXEDH;     /* number of hufts left in fixed_mem */
+    uIntf *v;           /* work area for huft_build */
 
-    /* set up fake z_stream for memory routines */
+    /* allocate memory */
-    z.zalloc = falloc;
+    if ((c = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
-    z.zfree = Z_NULL;
+      return Z_MEM_ERROR;
-    z.opaque = (voidpf)&f;
+    if ((v = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
+    {
+      ZFREE(z, c);
+      return Z_MEM_ERROR;
+    }
 
     /* literal table */
     for (k = 0; k < 144; k++)
@@ -428,16 +427,19 @@ inflate_huft * FAR *td;  /* distance tree result */
     for (; k < 288; k++)
       c[k] = 8;
     fixed_bl = 7;
-    huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, &z);
+    huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl,
+               fixed_mem, &f, v);
 
     /* distance table */
     for (k = 0; k < 30; k++)
       c[k] = 5;
     fixed_bd = 5;
-    huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, &z);
+    huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd,
+               fixed_mem, &f, v);
 
     /* done */
-    Assert(f == 0, "invalid build of fixed tables");
+    ZFREE(z, v);
+    ZFREE(z, c);
     fixed_built = 1;
   }
   *bl = fixed_bl;
@@ -446,33 +448,3 @@ inflate_huft * FAR *td;  /* distance tree result */
   *td = fixed_td;
   return Z_OK;
 }
-
-
-int inflate_trees_free(t, z)
-inflate_huft *t;        /* table to free */
-z_streamp z;            /* for zfree function */
-/* Free the malloc'ed tables built by huft_build(), which makes a linked
-   list of the tables it made, with the links in a dummy first entry of
-   each table. */
-{
-  register inflate_huft *p, *q, *r;
-
-  /* Reverse linked list */
-  p = Z_NULL;
-  q = t;
-  while (q != Z_NULL)
-  {
-    r = (q - 1)->next;
-    (q - 1)->next = p;
-    p = q;
-    q = r;
-  }
-  /* Go through linked list, freeing from the malloced (t[-1]) address. */
-  while (p != Z_NULL)
-  {
-    q = (--p)->next;
-    ZFREE(z,p);
-    p = q;
-  } 
-  return Z_OK;
-}

inftrees.h

@@ -1,5 +1,5 @@
 /* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995-1996 Mark Adler
+ * Copyright (C) 1995-1998 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -27,15 +27,19 @@ struct inflate_huft_s {
   } more;
 };
 
-#ifdef DEBUG
+/* Maximum size of dynamic tree.  The maximum found in a long but non-
-  extern uInt inflate_hufts;
+   exhaustive search was 1041 huft structures (875 for length/literals
-#endif
+   and 166 for distances, the latter actually the result of an
+   exhaustive search).  The actual maximum is not known, but the
+   value below is more than safe. */
+#define MANY 1440
 
 extern int inflate_trees_bits OF((
     uIntf *,                    /* 19 code lengths */
     uIntf *,                    /* bits tree desired/actual depth */
     inflate_huft * FAR *,       /* bits tree result */
-    z_streamp ));               /* for zalloc, zfree functions */
+    inflate_huft *,             /* space for trees */
+    z_streamp));                /* for messages */
 
 extern int inflate_trees_dynamic OF((
     uInt,                       /* number of literal/length codes */
@@ -45,15 +49,12 @@ extern int inflate_trees_dynamic OF((
     uIntf *,                    /* distance desired/actual bit depth */
     inflate_huft * FAR *,       /* literal/length tree result */
     inflate_huft * FAR *,       /* distance tree result */
-    z_streamp ));               /* for zalloc, zfree functions */
+    inflate_huft *,             /* space for trees */
+    z_streamp));                /* for messages */
 
 extern int inflate_trees_fixed OF((
     uIntf *,                    /* literal desired/actual bit depth */
     uIntf *,                    /* distance desired/actual bit depth */
     inflate_huft * FAR *,       /* literal/length tree result */
-    inflate_huft * FAR *));     /* distance tree result */
+    inflate_huft * FAR *,       /* distance tree result */
-
+    z_streamp));                /* for memory allocation */
-extern int inflate_trees_free OF((
-    inflate_huft *,             /* tables to free */
-    z_streamp ));               /* for zfree function */
-

infutil.c

@@ -1,5 +1,5 @@
 /* inflate_util.c -- data and routines common to blocks and codes
- * Copyright (C) 1995-1996 Mark Adler
+ * Copyright (C) 1995-1998 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 

infutil.h

@@ -1,5 +1,5 @@
 /* infutil.h -- types and macros common to blocks and codes
- * Copyright (C) 1995-1996 Mark Adler
+ * Copyright (C) 1995-1998 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -41,8 +41,6 @@ struct inflate_blocks_state {
       inflate_huft *tb;         /* bit length decoding tree */
     } trees;            /* if DTREE, decoding info for trees */
     struct {
-      inflate_huft *tl;
-      inflate_huft *td;         /* trees to free */
       inflate_codes_statef 
          *codes;
     } decode;           /* if CODES, current state */
@@ -52,6 +50,7 @@ struct inflate_blocks_state {
   /* mode independent information */
   uInt bitk;            /* bits in bit buffer */
   uLong bitb;           /* bit buffer */
+  inflate_huft *hufts;  /* single malloc for tree space */
   Bytef *window;        /* sliding window */
   Bytef *end;           /* one byte after sliding window */
   Bytef *read;          /* window read pointer */

minigzip.c

@@ -1,5 +1,5 @@
 /* minigzip.c -- simulate gzip using the zlib compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
+ * Copyright (C) 1995-1998 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -13,7 +13,7 @@
  * or in pipe mode.
  */
 
-/* $Id: minigzip.c,v 1.10 1996/07/24 13:41:04 me Exp $ */
+/* @(#) $Id$ */
 
 #include <stdio.h>
 #include "zlib.h"
@@ -25,6 +25,11 @@
    extern void exit  OF((int));
 #endif
 
+#ifdef USE_MMAP
+#  include <sys/types.h>
+#  include <sys/mman.h>
+#  include <sys/stat.h>
+#endif
 
 #if defined(MSDOS) || defined(OS2) || defined(WIN32)
 #  include <fcntl.h>
@@ -44,30 +49,36 @@
 #  define fileno(file) file->__file
 #endif
 
+#ifndef WIN32 /* unlink already in stdio.h for WIN32 */
+  extern int unlink OF((const char *));
+#endif
+
 #ifndef GZ_SUFFIX
 #  define GZ_SUFFIX ".gz"
 #endif
-#define SUFFIX_LEN sizeof(GZ_SUFFIX)
+#define SUFFIX_LEN (sizeof(GZ_SUFFIX)-1)
 
-extern int unlink OF((const char *));
+#define BUFLEN      16384
-
-#define BUFLEN 4096
 #define MAX_NAME_LEN 1024
 
-#define local static
+#ifdef MAXSEG_64K
-/* For MSDOS and other systems with limitation on stack size. For Unix,
+#  define local static
-    #define local
+   /* Needed for systems with limitation on stack size. */
-   works also.
+#else
- */
+#  define local
+#endif
 
 char *prog;
 
-void error           OF((const char *msg));
+void error            OF((const char *msg));
-void gz_compress     OF((FILE   *in, gzFile out));
+void gz_compress      OF((FILE   *in, gzFile out));
-void gz_uncompress   OF((gzFile in, FILE   *out));
+#ifdef USE_MMAP
-void file_compress   OF((char  *file));
+int  gz_compress_mmap OF((FILE   *in, gzFile out));
-void file_uncompress OF((char  *file));
+#endif
-int  main            OF((int argc, char *argv[]));
+void gz_uncompress    OF((gzFile in, FILE   *out));
+void file_compress    OF((char  *file, char *mode));
+void file_uncompress  OF((char  *file));
+int  main             OF((int argc, char *argv[]));
 
 /* ===========================================================================
  * Display error message and exit
@@ -82,6 +93,7 @@ void error(msg)
 /* ===========================================================================
  * Compress input to output then close both files.
  */
+
 void gz_compress(in, out)
     FILE   *in;
     gzFile out;
@@ -90,6 +102,12 @@ void gz_compress(in, out)
     int len;
     int err;
 
+#ifdef USE_MMAP
+    /* Try first compressing with mmap. If mmap fails (minigzip used in a
+     * pipe), use the normal fread loop.
+     */
+    if (gz_compress_mmap(in, out) == Z_OK) return;
+#endif
     for (;;) {
         len = fread(buf, 1, sizeof(buf), in);
         if (ferror(in)) {
@@ -104,6 +122,43 @@ void gz_compress(in, out)
     if (gzclose(out) != Z_OK) error("failed gzclose");
 }
 
+#ifdef USE_MMAP /* MMAP version, Miguel Albrecht <malbrech@eso.org> */
+
+/* Try compressing the input file at once using mmap. Return Z_OK if
+ * if success, Z_ERRNO otherwise.
+ */
+int gz_compress_mmap(in, out)
+    FILE   *in;
+    gzFile out;
+{
+    int len;
+    int err;
+    int ifd = fileno(in);
+    caddr_t buf;    /* mmap'ed buffer for the entire input file */
+    off_t buf_len;  /* length of the input file */
+    struct stat sb;
+
+    /* Determine the size of the file, needed for mmap: */
+    if (fstat(ifd, &sb) < 0) return Z_ERRNO;
+    buf_len = sb.st_size;
+    if (buf_len <= 0) return Z_ERRNO;
+
+    /* Now do the actual mmap: */
+    buf = mmap((caddr_t) 0, buf_len, PROT_READ, MAP_SHARED, ifd, (off_t)0); 
+    if (buf == (caddr_t)(-1)) return Z_ERRNO;
+
+    /* Compress the whole file at once: */
+    len = gzwrite(out, (char *)buf, (unsigned)buf_len);
+
+    if (len != (int)buf_len) error(gzerror(out, &err));
+
+    munmap(buf, buf_len);
+    fclose(in);
+    if (gzclose(out) != Z_OK) error("failed gzclose");
+    return Z_OK;
+}
+#endif /* USE_MMAP */
+
 /* ===========================================================================
  * Uncompress input to output then close both files.
  */
@@ -134,8 +189,9 @@ void gz_uncompress(in, out)
  * Compress the given file: create a corresponding .gz file and remove the
  * original.
  */
-void file_compress(file)
+void file_compress(file, mode)
     char  *file;
+    char  *mode;
 {
     local char outfile[MAX_NAME_LEN];
     FILE  *in;
@@ -149,7 +205,7 @@ void file_compress(file)
         perror(file);
         exit(1);
     }
-    out = gzopen(outfile, "wb"); /* use "wb9" for maximal compression */
+    out = gzopen(outfile, mode);
     if (out == NULL) {
         fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile);
         exit(1);
@@ -201,7 +257,11 @@ void file_uncompress(file)
 
 
 /* ===========================================================================
- * Usage:  minigzip [-d] [files...]
+ * Usage:  minigzip [-d] [-f] [-h] [-1 to -9] [files...]
+ *   -d : decompress
+ *   -f : compress with Z_FILTERED
+ *   -h : compress with Z_HUFFMAN_ONLY
+ *   -1 to -9 : compression level
  */
 
 int main(argc, argv)
@@ -210,15 +270,26 @@ int main(argc, argv)
 {
     int uncompr = 0;
     gzFile file;
+    char outmode[20];
+
+    strcpy(outmode, "wb6 ");
 
     prog = argv[0];
     argc--, argv++;
 
-    if (argc > 0) {
+    while (argc > 0) {
-        uncompr = (strcmp(*argv, "-d") == 0);
+      if (strcmp(*argv, "-d") == 0)
-        if (uncompr) {
+	uncompr = 1;
-            argc--, argv++;
+      else if (strcmp(*argv, "-f") == 0)
-        }
+	outmode[3] = 'f';
+      else if (strcmp(*argv, "-h") == 0)
+	outmode[3] = 'h';
+      else if ((*argv)[0] == '-' && (*argv)[1] >= '1' && (*argv)[1] <= '9' &&
+	       (*argv)[2] == 0)
+	outmode[2] = (*argv)[1];
+      else
+	break;
+      argc--, argv++;
     }
     if (argc == 0) {
         SET_BINARY_MODE(stdin);
@@ -228,7 +299,7 @@ int main(argc, argv)
             if (file == NULL) error("can't gzdopen stdin");
             gz_uncompress(file, stdout);
         } else {
-            file = gzdopen(fileno(stdout), "wb"); /* "wb9" for max compr. */
+            file = gzdopen(fileno(stdout), outmode);
             if (file == NULL) error("can't gzdopen stdout");
             gz_compress(stdin, file);
         }
@@ -237,7 +308,7 @@ int main(argc, argv)
             if (uncompr) {
                 file_uncompress(*argv);
             } else {
-                file_compress(*argv);
+                file_compress(*argv, outmode);
             }
         } while (argv++, --argc);
     }

msdos/Makefile.dj2

@@ -1,5 +1,5 @@
 # Makefile for zlib.  Modified for djgpp v2.0 by F. J. Donahoe, 3/15/96.
-# Copyright (C) 1995-1996 Jean-loup Gailly.
+# Copyright (C) 1995-1998 Jean-loup Gailly.
 # For conditions of distribution and use, see copyright notice in zlib.h 
 
 # To compile, or to compile and test, type:
@@ -22,7 +22,8 @@
 # - - - - -
 # Alternately, these variables may be defined below, overriding the values
 # in djgpp.env, as
-INCLUDE_PATH=c:\usr\include
+# INCLUDE_PATH=c:\usr\include
+# LIBRARY_PATH=c:\usr\lib
 
 CC=gcc
 
@@ -32,12 +33,12 @@ CC=gcc
 CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
              -Wstrict-prototypes -Wmissing-prototypes
 
-# If cp.exe is not found, replace with copy /Y .
+# If cp.exe is available, replace "copy /Y" with "cp -fp" .
-CP=cp -f
+CP=copy /Y
-# If install.exe is not found, replace with $(CP).
+# If gnu install.exe is available, replace $(CP) with ginstall.
-INSTALL=install
+INSTALL=$(CP)
-# The default value of RM is "rm -f."  If "rm.exe" is not found, uncomment:
+# The default value of RM is "rm -f."  If "rm.exe" is found, comment out:
-# RM=del
+RM=del
 LDLIBS=-L. -lz
 LD=$(CC) -s -o
 LDSHARED=$(CC)
@@ -77,15 +78,21 @@ libz.a: $(OBJS)
 install: $(INCL) $(LIBS)
 	-@if not exist $(INCLUDE_PATH)\nul mkdir $(INCLUDE_PATH)
 	-@if not exist $(LIBRARY_PATH)\nul mkdir $(LIBRARY_PATH)
-	for %%f in ($(INCL)) do $(INSTALL) %%f $(INCLUDE_PATH)
+	$(INSTALL) zlib.h $(INCLUDE_PATH)
-	for %%p in ($(LIBS)) do $(INSTALL) %%p $(LIBRARY_PATH)
+	$(INSTALL) zconf.h $(INCLUDE_PATH)
+	$(INSTALL) libz.a $(LIBRARY_PATH)
 
 uninstall:
-	for %%f in ($(INCL)) do $(RM) $(INCLUDE_PATH)\%%f
+	$(RM) $(INCLUDE_PATH)\zlib.h
-	for %%p in ($(LIBS)) do $(RM) $(LIBRARY_PATH)\%%p
+	$(RM) $(INCLUDE_PATH)\zconf.h
+	$(RM) $(LIBRARY_PATH)\libz.a
 
 clean:
-	for %%p in (*.d *.o *.exe libz.a libz.so* foo.gz) do $(RM) %%p
+	$(RM) *.d
+	$(RM) *.o
+	$(RM) *.exe
+	$(RM) libz.a
+	$(RM) foo.gz
 
 DEPS := $(wildcard *.d)
 ifneq ($(DEPS),)

msdos/Makefile.msc

@@ -15,7 +15,7 @@ CFLAGS=-Oait -Gs -nologo -W3 $(MODEL)
 #-Ox generates bad code with MSC 5.1
 CC=cl
 LD=link
-LDFLAGS=/e/st:0x1000/noe
+LDFLAGS=/e/st:0x1500/noe
 O=.obj
 
 # variables

msdos/Makefile.w32

@@ -0,0 +1,97 @@
+# Makefile for zlib
+# Microsoft 32-bit Visual C++ 4.0 or later (may work on earlier versions)
+
+# To use, do "nmake /f makefile.w32"
+
+# If you wish to reduce the memory requirements (default 256K for big
+# objects plus a few K), you can add to CFLAGS below: 
+#   -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
+# See zconf.h for details about the memory requirements.
+
+# ------------- Microsoft Visual C++ 4.0 and later -------------
+MODEL=
+CFLAGS=-Ox -GA3s -nologo -W3
+CC=cl
+LD=link
+LDFLAGS=
+O=.obj
+
+# variables
+OBJ1 = adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) \
+  trees$(O)
+OBJP1 = adler32$(O)+compress$(O)+crc32$(O)+gzio$(O)+uncompr$(O)+deflate$(O)+\
+  trees$(O)
+OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
+  infutil$(O) inffast$(O)
+OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
+  infutil$(O)+inffast$(O)
+
+all:  zlib.lib example.exe minigzip.exe
+
+adler32.obj: adler32.c zutil.h zlib.h zconf.h
+  $(CC) -c $(CFLAGS) $*.c
+
+compress.obj: compress.c zlib.h zconf.h
+  $(CC) -c $(CFLAGS) $*.c
+
+crc32.obj: crc32.c zutil.h zlib.h zconf.h
+  $(CC) -c $(CFLAGS) $*.c
+
+deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+  $(CC) -c $(CFLAGS) $*.c
+
+gzio.obj: gzio.c zutil.h zlib.h zconf.h
+  $(CC) -c $(CFLAGS) $*.c
+
+infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h\
+   infcodes.h infutil.h
+  $(CC) -c $(CFLAGS) $*.c
+
+infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h\
+   infcodes.h inffast.h
+  $(CC) -c $(CFLAGS) $*.c
+
+inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
+  $(CC) -c $(CFLAGS) $*.c
+
+inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+  $(CC) -c $(CFLAGS) $*.c
+
+infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
+  $(CC) -c $(CFLAGS) $*.c
+
+inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+  $(CC) -c $(CFLAGS) $*.c
+
+trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
+  $(CC) -c $(CFLAGS) $*.c
+
+uncompr.obj: uncompr.c zlib.h zconf.h
+  $(CC) -c $(CFLAGS) $*.c
+
+zutil.obj: zutil.c zutil.h zlib.h zconf.h
+  $(CC) -c $(CFLAGS) $*.c
+
+example.obj: example.c zlib.h zconf.h
+  $(CC) -c $(CFLAGS) $*.c
+
+minigzip.obj: minigzip.c zlib.h zconf.h
+  $(CC) -c $(CFLAGS) $*.c
+
+zlib.lib: $(OBJ1) $(OBJ2)
+  if exist zlib.lib del zlib.lib
+  lib /OUT:zlib.lib $(OBJ1) $(OBJ2)
+
+example.exe: example.obj zlib.lib
+  $(LD) $(LDFLAGS) example.obj zlib.lib /OUT:example.exe /SUBSYSTEM:CONSOLE
+
+minigzip.exe: minigzip.obj zlib.lib
+  $(LD) $(LDFLAGS) minigzip.obj zlib.lib /OUT:minigzip.exe /SUBSYSTEM:CONSOLE
+
+test: example.exe minigzip.exe
+  example
+  echo hello world | minigzip | minigzip -d 
+
+#clean:
+#  del *.obj
+#  del *.exe

msdos/zlib.def

@@ -0,0 +1,60 @@
+LIBRARY		"zlib"
+
+DESCRIPTION	'"""zlib data compression library"""'
+
+EXETYPE		NT
+
+SUBSYSTEM	WINDOWS
+
+STUB		'WINSTUB.EXE'
+
+VERSION		1.11
+
+CODE		 EXECUTE READ
+
+DATA		 READ WRITE
+
+HEAPSIZE	1048576,4096
+
+EXPORTS
+    adler32                        @1
+    compress                       @2
+    crc32                          @3
+    deflate                        @4
+    deflateCopy                    @5
+    deflateEnd                     @6
+    deflateInit2_                  @7
+    deflateInit_                   @8
+    deflateParams                  @9
+    deflateReset                   @10
+    deflateSetDictionary           @11
+    gzclose                        @12
+    gzdopen                        @13
+    gzerror                        @14
+    gzflush                        @15
+    gzopen                         @16
+    gzread                         @17
+    gzwrite                        @18
+    inflate                        @19
+    inflateEnd                     @20
+    inflateInit2_                  @21
+    inflateInit_                   @22
+    inflateReset                   @23
+    inflateSetDictionary           @24
+    inflateSync                    @25
+    uncompress                     @26
+    zlibVersion                    @27
+    gzprintf                       @28
+    gzputc                         @29
+    gzgetc                         @30
+    gzseek                         @31
+    gzrewind                       @32
+    gztell                         @33
+    gzeof                          @34
+    gzsetparams                    @35
+    zError                         @36
+    inflateSyncPoint               @37
+    get_crc_table                  @38
+    compress2                      @39
+    gzputs                         @40
+    gzgets                         @41

msdos/zlib.rc

@@ -2,8 +2,8 @@
 
 #define IDR_VERSION1  1
 IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
-  FILEVERSION	 1,0,5,0
+  FILEVERSION	 1,1,1,0
-  PRODUCTVERSION 1,0,5,0
+  PRODUCTVERSION 1,1,1,0
   FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
   FILEFLAGS	0
   FILEOS	VOS_DOS_WINDOWS32
@@ -17,12 +17,12 @@ BEGIN
 
     BEGIN
       VALUE "FileDescription", "zlib data compression library\0"
-      VALUE "FileVersion",	"1.0.5\0"
+      VALUE "FileVersion",	"1.1.1\0"
       VALUE "InternalName",	"zlib\0"
-      VALUE "OriginalFilename",	"zlib.lib\0"
+      VALUE "OriginalFilename",	"zlib.dll\0"
       VALUE "ProductName",	"ZLib.DLL\0"
-      VALUE "Comments",	"DLL support by Alessandro Iacopetti\0"
+      VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
-      VALUE "LegalCopyright", "(C) 1995-1996 Jean-loup Gailly & Mark Adler\0"
+      VALUE "LegalCopyright", "(C) 1995-1998 Jean-loup Gailly & Mark Adler\0"
     END
   END
   BLOCK "VarFileInfo"

nt/Makefile.nt

@@ -0,0 +1,88 @@
+# Makefile for zlib
+
+!include <ntwin32.mak>
+
+CC=cl
+LD=link
+CFLAGS=-O -nologo
+LDFLAGS=
+O=.obj
+
+# variables
+OBJ1 = adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) \
+  trees$(O)
+OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
+  infutil$(O) inffast$(O)
+
+all:  zlib.dll example.exe minigzip.exe
+
+adler32.obj: adler32.c zutil.h zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+compress.obj: compress.c zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+crc32.obj: crc32.c zutil.h zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+gzio.obj: gzio.c zutil.h zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h\
+   infcodes.h infutil.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h\
+   infcodes.h inffast.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+uncompr.obj: uncompr.c zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+zutil.obj: zutil.c zutil.h zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+example.obj: example.c zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+minigzip.obj: minigzip.c zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+zlib.dll: $(OBJ1) $(OBJ2) zlib.dnt
+	link $(dlllflags) -out:$@ -def:zlib.dnt $(OBJ1) $(OBJ2) $(guilibsdll)
+
+zlib.lib: zlib.dll
+
+example.exe: example.obj zlib.lib
+	$(LD) $(LDFLAGS) example.obj zlib.lib
+
+minigzip.exe: minigzip.obj zlib.lib
+	$(LD) $(LDFLAGS) minigzip.obj zlib.lib
+
+test: example.exe minigzip.exe
+	example
+	echo hello world | minigzip | minigzip -d 
+
+clean:
+	del *.obj
+	del *.exe
+	del *.dll
+	del *.lib

nt/zlib.dnt

@@ -0,0 +1,47 @@
+LIBRARY		zlib.dll
+EXETYPE WINDOWS
+CODE		 PRELOAD MOVEABLE DISCARDABLE
+DATA		 PRELOAD MOVEABLE MULTIPLE
+
+EXPORTS
+    adler32                        @1
+    compress                       @2
+    crc32                          @3
+    deflate                        @4
+    deflateCopy                    @5
+    deflateEnd                     @6
+    deflateInit2_                  @7
+    deflateInit_                   @8
+    deflateParams                  @9
+    deflateReset                   @10
+    deflateSetDictionary           @11
+    gzclose                        @12
+    gzdopen                        @13
+    gzerror                        @14
+    gzflush                        @15
+    gzopen                         @16
+    gzread                         @17
+    gzwrite                        @18
+    inflate                        @19
+    inflateEnd                     @20
+    inflateInit2_                  @21
+    inflateInit_                   @22
+    inflateReset                   @23
+    inflateSetDictionary           @24
+    inflateSync                    @25
+    uncompress                     @26
+    zlibVersion                    @27
+    gzprintf                       @28
+    gzputc                         @29
+    gzgetc                         @30
+    gzseek                         @31
+    gzrewind                       @32
+    gztell                         @33
+    gzeof                          @34
+    gzsetparams                    @35
+    zError                         @36
+    inflateSyncPoint               @37
+    get_crc_table                  @38
+    compress2                      @39
+    gzputs                         @40
+    gzgets                         @41

trees.c

@@ -1,5 +1,5 @@
 /* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995-1996 Jean-loup Gailly
+ * Copyright (C) 1995-1998 Jean-loup Gailly
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -29,7 +29,9 @@
  *          Addison-Wesley, 1983. ISBN 0-201-06672-6.
  */
 
-/* $Id: trees.c,v 1.11 1996/07/24 13:41:06 me Exp $ */
+/* @(#) $Id$ */
+
+/* #define GEN_TREES_H */
 
 #include "deflate.h"
 
@@ -56,16 +58,16 @@
 #define REPZ_11_138  18
 /* repeat a zero length 11-138 times  (7 bits of repeat count) */
 
-local int extra_lbits[LENGTH_CODES] /* extra bits for each length code */
+local const int extra_lbits[LENGTH_CODES] /* extra bits for each length code */
    = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0};
 
-local int extra_dbits[D_CODES] /* extra bits for each distance code */
+local const int extra_dbits[D_CODES] /* extra bits for each distance code */
    = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13};
 
-local int extra_blbits[BL_CODES]/* extra bits for each bit length code */
+local const int extra_blbits[BL_CODES]/* extra bits for each bit length code */
    = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7};
 
-local uch bl_order[BL_CODES]
+local const uch bl_order[BL_CODES]
    = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15};
 /* The lengths of the bit length codes are sent in order of decreasing
  * probability, to avoid transmitting the lengths for unused bit length codes.
@@ -80,6 +82,11 @@ local uch bl_order[BL_CODES]
  * Local data. These are initialized only once.
  */
 
+#define DIST_CODE_LEN  512 /* see definition of array dist_code below */
+
+#if defined(GEN_TREES_H) || !defined(STDC)
+/* non ANSI compilers may not accept trees.h */
+
 local ct_data static_ltree[L_CODES+2];
 /* The static literal tree. Since the bit lengths are imposed, there is no
  * need for the L_CODES extra codes used during heap construction. However
@@ -92,13 +99,13 @@ local ct_data static_dtree[D_CODES];
  * 5 bits.)
  */
 
-local uch dist_code[512];
+uch _dist_code[DIST_CODE_LEN];
-/* distance codes. The first 256 values correspond to the distances
+/* Distance codes. The first 256 values correspond to the distances
  * 3 .. 258, the last 256 values correspond to the top 8 bits of
  * the 15 bit distances.
  */
 
-local uch length_code[MAX_MATCH-MIN_MATCH+1];
+uch _length_code[MAX_MATCH-MIN_MATCH+1];
 /* length code for each normalized match length (0 == MIN_MATCH) */
 
 local int base_length[LENGTH_CODES];
@@ -107,9 +114,13 @@ local int base_length[LENGTH_CODES];
 local int base_dist[D_CODES];
 /* First normalized distance for each code (0 = distance of 1) */
 
+#else
+#  include "trees.h"
+#endif /* GEN_TREES_H */
+
 struct static_tree_desc_s {
-    ct_data *static_tree;        /* static tree or NULL */
+    const ct_data *static_tree;  /* static tree or NULL */
-    intf    *extra_bits;         /* extra bits for each code or NULL */
+    const intf *extra_bits;      /* extra bits for each code or NULL */
     int     extra_base;          /* base index for extra_bits */
     int     elems;               /* max number of elements in the tree */
     int     max_length;          /* max bit length for the codes */
@@ -122,7 +133,7 @@ local static_tree_desc  static_d_desc =
 {static_dtree, extra_dbits, 0,          D_CODES, MAX_BITS};
 
 local static_tree_desc  static_bl_desc =
-{(ct_data *)0, extra_blbits, 0,      BL_CODES, MAX_BL_BITS};
+{(const ct_data *)0, extra_blbits, 0,   BL_CODES, MAX_BL_BITS};
 
 /* ===========================================================================
  * Local (static) routines in this file.
@@ -148,23 +159,20 @@ local void bi_flush       OF((deflate_state *s));
 local void copy_block     OF((deflate_state *s, charf *buf, unsigned len,
                               int header));
 
+#ifdef GEN_TREES_H
+local void gen_trees_header OF((void));
+#endif
+
 #ifndef DEBUG
 #  define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len)
    /* Send a code of the given tree. c and tree must not have side effects */
 
 #else /* DEBUG */
 #  define send_code(s, c, tree) \
-     { if (verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \
+     { if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \
        send_bits(s, tree[c].Code, tree[c].Len); }
 #endif
 
-#define d_code(dist) \
-   ((dist) < 256 ? dist_code[dist] : dist_code[256+((dist)>>7)])
-/* Mapping from a distance to a distance code. dist is the distance - 1 and
- * must not have side effects. dist_code[256] and dist_code[257] are never
- * used.
- */
-
 /* ===========================================================================
  * Output a short LSB first on the stream.
  * IN assertion: there is enough room in pendingBuf.
@@ -226,12 +234,11 @@ local void send_bits(s, value, length)
 /* the arguments must not have side effects */
 
 /* ===========================================================================
- * Initialize the various 'constant' tables. In a multi-threaded environment,
+ * Initialize the various 'constant' tables.
- * this function may be called by two threads concurrently, but this is
- * harmless since both invocations do exactly the same thing.
  */
 local void tr_static_init()
 {
+#if defined(GEN_TREES_H) || !defined(STDC)
     static int static_init_done = 0;
     int n;        /* iterates over tree elements */
     int bits;     /* bit counter */
@@ -248,7 +255,7 @@ local void tr_static_init()
     for (code = 0; code < LENGTH_CODES-1; code++) {
         base_length[code] = length;
         for (n = 0; n < (1<<extra_lbits[code]); n++) {
-            length_code[length++] = (uch)code;
+            _length_code[length++] = (uch)code;
         }
     }
     Assert (length == 256, "tr_static_init: length != 256");
@@ -256,14 +263,14 @@ local void tr_static_init()
      * in two different ways: code 284 + 5 bits or code 285, so we
      * overwrite length_code[255] to use the best encoding:
      */
-    length_code[length-1] = (uch)code;
+    _length_code[length-1] = (uch)code;
 
     /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
     dist = 0;
     for (code = 0 ; code < 16; code++) {
         base_dist[code] = dist;
         for (n = 0; n < (1<<extra_dbits[code]); n++) {
-            dist_code[dist++] = (uch)code;
+            _dist_code[dist++] = (uch)code;
         }
     }
     Assert (dist == 256, "tr_static_init: dist != 256");
@@ -271,7 +278,7 @@ local void tr_static_init()
     for ( ; code < D_CODES; code++) {
         base_dist[code] = dist << 7;
         for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
-            dist_code[256 + dist++] = (uch)code;
+            _dist_code[256 + dist++] = (uch)code;
         }
     }
     Assert (dist == 256, "tr_static_init: 256+dist != 512");
@@ -295,8 +302,74 @@ local void tr_static_init()
         static_dtree[n].Code = bi_reverse((unsigned)n, 5);
     }
     static_init_done = 1;
+
+#  ifdef GEN_TREES_H
+    gen_trees_header();
+#  endif
+#endif /* defined(GEN_TREES_H) || !defined(STDC) */
 }
 
+/* ===========================================================================
+ * Genererate the file trees.h describing the static trees.
+ */
+#ifdef GEN_TREES_H
+#  ifndef DEBUG
+#    include <stdio.h>
+#  endif
+
+#  define SEPARATOR(i, last, width) \
+      ((i) == (last)? "\n};\n\n" :    \
+       ((i) % (width) == (width)-1 ? ",\n" : ", "))
+
+void gen_trees_header()
+{
+    FILE *header = fopen("trees.h", "w");
+    int i;
+
+    Assert (header != NULL, "Can't open trees.h");
+    fprintf(header,
+	    "/* header created automatically with -DGEN_TREES_H */\n\n");
+
+    fprintf(header, "local const ct_data static_ltree[L_CODES+2] = {\n");
+    for (i = 0; i < L_CODES+2; i++) {
+	fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code,
+		static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5));
+    }
+
+    fprintf(header, "local const ct_data static_dtree[D_CODES] = {\n");
+    for (i = 0; i < D_CODES; i++) {
+	fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code,
+		static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5));
+    }
+
+    fprintf(header, "const uch _dist_code[DIST_CODE_LEN] = {\n");
+    for (i = 0; i < DIST_CODE_LEN; i++) {
+	fprintf(header, "%2u%s", _dist_code[i],
+		SEPARATOR(i, DIST_CODE_LEN-1, 20));
+    }
+
+    fprintf(header, "const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
+    for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) {
+	fprintf(header, "%2u%s", _length_code[i],
+		SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20));
+    }
+
+    fprintf(header, "local const int base_length[LENGTH_CODES] = {\n");
+    for (i = 0; i < LENGTH_CODES; i++) {
+	fprintf(header, "%1u%s", base_length[i],
+		SEPARATOR(i, LENGTH_CODES-1, 20));
+    }
+
+    fprintf(header, "local const int base_dist[D_CODES] = {\n");
+    for (i = 0; i < D_CODES; i++) {
+	fprintf(header, "%5u%s", base_dist[i],
+		SEPARATOR(i, D_CODES-1, 10));
+    }
+
+    fclose(header);
+}
+#endif /* GEN_TREES_H */
+
 /* ===========================================================================
  * Initialize the tree data structures for a new zlib stream.
  */
@@ -413,12 +486,12 @@ local void gen_bitlen(s, desc)
     deflate_state *s;
     tree_desc *desc;    /* the tree descriptor */
 {
-    ct_data *tree  = desc->dyn_tree;
+    ct_data *tree        = desc->dyn_tree;
-    int max_code   = desc->max_code;
+    int max_code         = desc->max_code;
-    ct_data *stree = desc->stat_desc->static_tree;
+    const ct_data *stree = desc->stat_desc->static_tree;
-    intf *extra    = desc->stat_desc->extra_bits;
+    const intf *extra    = desc->stat_desc->extra_bits;
-    int base       = desc->stat_desc->extra_base;
+    int base             = desc->stat_desc->extra_base;
-    int max_length = desc->stat_desc->max_length;
+    int max_length       = desc->stat_desc->max_length;
     int h;              /* heap index */
     int n, m;           /* iterate over the tree elements */
     int bits;           /* bit length */
@@ -542,9 +615,9 @@ local void build_tree(s, desc)
     deflate_state *s;
     tree_desc *desc; /* the tree descriptor */
 {
-    ct_data *tree   = desc->dyn_tree;
+    ct_data *tree         = desc->dyn_tree;
-    ct_data *stree  = desc->stat_desc->static_tree;
+    const ct_data *stree  = desc->stat_desc->static_tree;
-    int elems       = desc->stat_desc->elems;
+    int elems             = desc->stat_desc->elems;
     int n, m;          /* iterate over heap elements */
     int max_code = -1; /* largest code with non zero frequency */
     int node;          /* new node being created */
@@ -965,12 +1038,13 @@ int _tr_tally (s, dist, lc)
                (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
                (ush)d_code(dist) < (ush)D_CODES,  "_tr_tally: bad match");
 
-        s->dyn_ltree[length_code[lc]+LITERALS+1].Freq++;
+        s->dyn_ltree[_length_code[lc]+LITERALS+1].Freq++;
         s->dyn_dtree[d_code(dist)].Freq++;
     }
 
+#ifdef TRUNCATE_BLOCK
     /* Try to guess if it is profitable to stop the current block here */
-    if (s->level > 2 && (s->last_lit & 0xfff) == 0) {
+    if ((s->last_lit & 0x1fff) == 0 && s->level > 2) {
         /* Compute an upper bound for the compressed length */
         ulg out_length = (ulg)s->last_lit*8L;
         ulg in_length = (ulg)((long)s->strstart - s->block_start);
@@ -985,6 +1059,7 @@ int _tr_tally (s, dist, lc)
                100L - out_length*100L/in_length));
         if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1;
     }
+#endif
     return (s->last_lit == s->lit_bufsize-1);
     /* We avoid equality with lit_bufsize because of wraparound at 64K
      * on 16 bit machines and because stored blocks are restricted to
@@ -1014,7 +1089,7 @@ local void compress_block(s, ltree, dtree)
             Tracecv(isgraph(lc), (stderr," '%c' ", lc));
         } else {
             /* Here, lc is the match length - MIN_MATCH */
-            code = length_code[lc];
+            code = _length_code[lc];
             send_code(s, code+LITERALS+1, ltree); /* send the length code */
             extra = extra_lbits[code];
             if (extra != 0) {

trees.h

@@ -0,0 +1,128 @@
+/* header created automatically with -DGEN_TREES_H */
+
+local const ct_data static_ltree[L_CODES+2] = {
+{{ 12},{  8}}, {{140},{  8}}, {{ 76},{  8}}, {{204},{  8}}, {{ 44},{  8}},
+{{172},{  8}}, {{108},{  8}}, {{236},{  8}}, {{ 28},{  8}}, {{156},{  8}},
+{{ 92},{  8}}, {{220},{  8}}, {{ 60},{  8}}, {{188},{  8}}, {{124},{  8}},
+{{252},{  8}}, {{  2},{  8}}, {{130},{  8}}, {{ 66},{  8}}, {{194},{  8}},
+{{ 34},{  8}}, {{162},{  8}}, {{ 98},{  8}}, {{226},{  8}}, {{ 18},{  8}},
+{{146},{  8}}, {{ 82},{  8}}, {{210},{  8}}, {{ 50},{  8}}, {{178},{  8}},
+{{114},{  8}}, {{242},{  8}}, {{ 10},{  8}}, {{138},{  8}}, {{ 74},{  8}},
+{{202},{  8}}, {{ 42},{  8}}, {{170},{  8}}, {{106},{  8}}, {{234},{  8}},
+{{ 26},{  8}}, {{154},{  8}}, {{ 90},{  8}}, {{218},{  8}}, {{ 58},{  8}},
+{{186},{  8}}, {{122},{  8}}, {{250},{  8}}, {{  6},{  8}}, {{134},{  8}},
+{{ 70},{  8}}, {{198},{  8}}, {{ 38},{  8}}, {{166},{  8}}, {{102},{  8}},
+{{230},{  8}}, {{ 22},{  8}}, {{150},{  8}}, {{ 86},{  8}}, {{214},{  8}},
+{{ 54},{  8}}, {{182},{  8}}, {{118},{  8}}, {{246},{  8}}, {{ 14},{  8}},
+{{142},{  8}}, {{ 78},{  8}}, {{206},{  8}}, {{ 46},{  8}}, {{174},{  8}},
+{{110},{  8}}, {{238},{  8}}, {{ 30},{  8}}, {{158},{  8}}, {{ 94},{  8}},
+{{222},{  8}}, {{ 62},{  8}}, {{190},{  8}}, {{126},{  8}}, {{254},{  8}},
+{{  1},{  8}}, {{129},{  8}}, {{ 65},{  8}}, {{193},{  8}}, {{ 33},{  8}},
+{{161},{  8}}, {{ 97},{  8}}, {{225},{  8}}, {{ 17},{  8}}, {{145},{  8}},
+{{ 81},{  8}}, {{209},{  8}}, {{ 49},{  8}}, {{177},{  8}}, {{113},{  8}},
+{{241},{  8}}, {{  9},{  8}}, {{137},{  8}}, {{ 73},{  8}}, {{201},{  8}},
+{{ 41},{  8}}, {{169},{  8}}, {{105},{  8}}, {{233},{  8}}, {{ 25},{  8}},
+{{153},{  8}}, {{ 89},{  8}}, {{217},{  8}}, {{ 57},{  8}}, {{185},{  8}},
+{{121},{  8}}, {{249},{  8}}, {{  5},{  8}}, {{133},{  8}}, {{ 69},{  8}},
+{{197},{  8}}, {{ 37},{  8}}, {{165},{  8}}, {{101},{  8}}, {{229},{  8}},
+{{ 21},{  8}}, {{149},{  8}}, {{ 85},{  8}}, {{213},{  8}}, {{ 53},{  8}},
+{{181},{  8}}, {{117},{  8}}, {{245},{  8}}, {{ 13},{  8}}, {{141},{  8}},
+{{ 77},{  8}}, {{205},{  8}}, {{ 45},{  8}}, {{173},{  8}}, {{109},{  8}},
+{{237},{  8}}, {{ 29},{  8}}, {{157},{  8}}, {{ 93},{  8}}, {{221},{  8}},
+{{ 61},{  8}}, {{189},{  8}}, {{125},{  8}}, {{253},{  8}}, {{ 19},{  9}},
+{{275},{  9}}, {{147},{  9}}, {{403},{  9}}, {{ 83},{  9}}, {{339},{  9}},
+{{211},{  9}}, {{467},{  9}}, {{ 51},{  9}}, {{307},{  9}}, {{179},{  9}},
+{{435},{  9}}, {{115},{  9}}, {{371},{  9}}, {{243},{  9}}, {{499},{  9}},
+{{ 11},{  9}}, {{267},{  9}}, {{139},{  9}}, {{395},{  9}}, {{ 75},{  9}},
+{{331},{  9}}, {{203},{  9}}, {{459},{  9}}, {{ 43},{  9}}, {{299},{  9}},
+{{171},{  9}}, {{427},{  9}}, {{107},{  9}}, {{363},{  9}}, {{235},{  9}},
+{{491},{  9}}, {{ 27},{  9}}, {{283},{  9}}, {{155},{  9}}, {{411},{  9}},
+{{ 91},{  9}}, {{347},{  9}}, {{219},{  9}}, {{475},{  9}}, {{ 59},{  9}},
+{{315},{  9}}, {{187},{  9}}, {{443},{  9}}, {{123},{  9}}, {{379},{  9}},
+{{251},{  9}}, {{507},{  9}}, {{  7},{  9}}, {{263},{  9}}, {{135},{  9}},
+{{391},{  9}}, {{ 71},{  9}}, {{327},{  9}}, {{199},{  9}}, {{455},{  9}},
+{{ 39},{  9}}, {{295},{  9}}, {{167},{  9}}, {{423},{  9}}, {{103},{  9}},
+{{359},{  9}}, {{231},{  9}}, {{487},{  9}}, {{ 23},{  9}}, {{279},{  9}},
+{{151},{  9}}, {{407},{  9}}, {{ 87},{  9}}, {{343},{  9}}, {{215},{  9}},
+{{471},{  9}}, {{ 55},{  9}}, {{311},{  9}}, {{183},{  9}}, {{439},{  9}},
+{{119},{  9}}, {{375},{  9}}, {{247},{  9}}, {{503},{  9}}, {{ 15},{  9}},
+{{271},{  9}}, {{143},{  9}}, {{399},{  9}}, {{ 79},{  9}}, {{335},{  9}},
+{{207},{  9}}, {{463},{  9}}, {{ 47},{  9}}, {{303},{  9}}, {{175},{  9}},
+{{431},{  9}}, {{111},{  9}}, {{367},{  9}}, {{239},{  9}}, {{495},{  9}},
+{{ 31},{  9}}, {{287},{  9}}, {{159},{  9}}, {{415},{  9}}, {{ 95},{  9}},
+{{351},{  9}}, {{223},{  9}}, {{479},{  9}}, {{ 63},{  9}}, {{319},{  9}},
+{{191},{  9}}, {{447},{  9}}, {{127},{  9}}, {{383},{  9}}, {{255},{  9}},
+{{511},{  9}}, {{  0},{  7}}, {{ 64},{  7}}, {{ 32},{  7}}, {{ 96},{  7}},
+{{ 16},{  7}}, {{ 80},{  7}}, {{ 48},{  7}}, {{112},{  7}}, {{  8},{  7}},
+{{ 72},{  7}}, {{ 40},{  7}}, {{104},{  7}}, {{ 24},{  7}}, {{ 88},{  7}},
+{{ 56},{  7}}, {{120},{  7}}, {{  4},{  7}}, {{ 68},{  7}}, {{ 36},{  7}},
+{{100},{  7}}, {{ 20},{  7}}, {{ 84},{  7}}, {{ 52},{  7}}, {{116},{  7}},
+{{  3},{  8}}, {{131},{  8}}, {{ 67},{  8}}, {{195},{  8}}, {{ 35},{  8}},
+{{163},{  8}}, {{ 99},{  8}}, {{227},{  8}}
+};
+
+local const ct_data static_dtree[D_CODES] = {
+{{ 0},{ 5}}, {{16},{ 5}}, {{ 8},{ 5}}, {{24},{ 5}}, {{ 4},{ 5}},
+{{20},{ 5}}, {{12},{ 5}}, {{28},{ 5}}, {{ 2},{ 5}}, {{18},{ 5}},
+{{10},{ 5}}, {{26},{ 5}}, {{ 6},{ 5}}, {{22},{ 5}}, {{14},{ 5}},
+{{30},{ 5}}, {{ 1},{ 5}}, {{17},{ 5}}, {{ 9},{ 5}}, {{25},{ 5}},
+{{ 5},{ 5}}, {{21},{ 5}}, {{13},{ 5}}, {{29},{ 5}}, {{ 3},{ 5}},
+{{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}}
+};
+
+const uch _dist_code[DIST_CODE_LEN] = {
+ 0,  1,  2,  3,  4,  4,  5,  5,  6,  6,  6,  6,  7,  7,  7,  7,  8,  8,  8,  8,
+ 8,  8,  8,  8,  9,  9,  9,  9,  9,  9,  9,  9, 10, 10, 10, 10, 10, 10, 10, 10,
+10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
+11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12,
+12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13, 13, 13,
+13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
+13, 13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,  0,  0, 16, 17,
+18, 18, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22,
+23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29
+};
+
+const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {
+ 0,  1,  2,  3,  4,  5,  6,  7,  8,  8,  9,  9, 10, 10, 11, 11, 12, 12, 12, 12,
+13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16,
+17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19,
+19, 19, 19, 19, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,
+21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22, 22,
+22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23,
+23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
+25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 28
+};
+
+local const int base_length[LENGTH_CODES] = {
+0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56,
+64, 80, 96, 112, 128, 160, 192, 224, 0
+};
+
+local const int base_dist[D_CODES] = {
+    0,     1,     2,     3,     4,     6,     8,    12,    16,    24,
+   32,    48,    64,    96,   128,   192,   256,   384,   512,   768,
+ 1024,  1536,  2048,  3072,  4096,  6144,  8192, 12288, 16384, 24576
+};
+

uncompr.c

@@ -1,9 +1,9 @@
 /* uncompr.c -- decompress a memory buffer
- * Copyright (C) 1995-1996 Jean-loup Gailly.
+ * Copyright (C) 1995-1998 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
-/* $Id: uncompr.c,v 1.8 1996/01/30 21:59:26 me Exp $ */
+/* @(#) $Id$ */
 
 #include "zlib.h"
 
@@ -22,7 +22,7 @@
    enough memory, Z_BUF_ERROR if there was not enough room in the output
    buffer, or Z_DATA_ERROR if the input data was corrupted.
 */
-int uncompress (dest, destLen, source, sourceLen)
+int ZEXPORT uncompress (dest, destLen, source, sourceLen)
     Bytef *dest;
     uLongf *destLen;
     const Bytef *source;
@@ -49,7 +49,7 @@ int uncompress (dest, destLen, source, sourceLen)
     err = inflate(&stream, Z_FINISH);
     if (err != Z_STREAM_END) {
         inflateEnd(&stream);
-        return err;
+        return err == Z_OK ? Z_BUF_ERROR : err;
     }
     *destLen = stream.total_out;
 

zconf.h

@@ -1,9 +1,9 @@
 /* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
+ * Copyright (C) 1995-1998 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
-/* $Id: zconf.h,v 1.20 1996/07/02 15:09:28 me Exp $ */
+/* @(#) $Id$ */
 
 #ifndef _ZCONF_H
 #define _ZCONF_H
@@ -27,8 +27,10 @@
 #  define inflateInit2_	z_inflateInit2_
 #  define inflateSetDictionary z_inflateSetDictionary
 #  define inflateSync	z_inflateSync
+#  define inflateSyncPoint z_inflateSyncPoint
 #  define inflateReset	z_inflateReset
 #  define compress	z_compress
+#  define compress2	z_compress2
 #  define uncompress	z_uncompress
 #  define adler32	z_adler32
 #  define crc32		z_crc32
@@ -72,8 +74,10 @@
 #if (defined(MSDOS) || defined(_WINDOWS) || defined(WIN32))  && !defined(STDC)
 #  define STDC
 #endif
-#if (defined(__STDC__) || defined(__cplusplus)) && !defined(STDC)
+#if defined(__STDC__) || defined(__cplusplus) || defined(__OS2__)
-#  define STDC
+#  ifndef STDC
+#    define STDC
+#  endif
 #endif
 
 #ifndef STDC
@@ -87,6 +91,12 @@
 #  define NO_DUMMY_DECL
 #endif
 
+/* Borland C incorrectly complains about missing returns: */
+#if defined(__BORLANDC__)
+#  define NEED_DUMMY_RETURN
+#endif
+
+
 /* Maximum value for memLevel in deflateInit2 */
 #ifndef MAX_MEM_LEVEL
 #  ifdef MAXSEG_64K
@@ -96,13 +106,17 @@
 #  endif
 #endif
 
-/* Maximum value for windowBits in deflateInit2 and inflateInit2 */
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
 #ifndef MAX_WBITS
 #  define MAX_WBITS   15 /* 32K LZ77 window */
 #endif
 
 /* The memory requirements for deflate are (in bytes):
-            1 << (windowBits+2)   +  1 << (memLevel+9)
+            (1 << (windowBits+2)) +  (1 << (memLevel+9))
  that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
  plus a few kilobytes for small objects. For example, if you want to reduce
  the default memory requirements from 256K to 128K, compile with
@@ -145,6 +159,29 @@
 #    define FAR __far
 #  endif
 #endif
+
+/* Compile with -DZLIB_DLL for Windows DLL support */
+#if (defined(_WINDOWS) || defined(WINDOWS)) && defined(ZLIB_DLL)
+#  ifdef FAR
+#    undef FAR
+#  endif
+#  include <windows.h>
+#  define ZEXPORT  WINAPI
+#  ifdef WIN32
+#    define ZEXPORTVA  WINAPIV
+#  else
+#    define ZEXPORTVA  FAR _cdecl _export
+#  endif
+#else
+#   if defined (__BORLANDC__) && defined (_Windows) && defined (__DLL__)
+#       define ZEXPORT _export
+#       define ZEXPORTVA _export
+#   else
+#       define ZEXPORT
+#       define ZEXPORTVA
+#   endif
+#endif
+
 #ifndef FAR
 #   define FAR
 #endif
@@ -172,13 +209,44 @@ typedef uLong FAR uLongf;
    typedef Byte     *voidp;
 #endif
 
+#ifdef HAVE_UNISTD_H
+#  include <sys/types.h> /* for off_t */
+#  include <unistd.h>    /* for SEEK_* and off_t */
+#  define z_off_t  off_t
+#endif
+#ifndef SEEK_SET
+#  define SEEK_SET        0       /* Seek from beginning of file.  */
+#  define SEEK_CUR        1       /* Seek from current position.  */
+#endif
+#ifndef z_off_t
+#  define  z_off_t long
+#endif
 
-/* Compile with -DZLIB_DLL for Windows DLL support */
+/* MVS linker does not support external names larger than 8 bytes */
-#if (defined(_WINDOWS) || defined(WINDOWS)) && defined(ZLIB_DLL)
+#if defined(__MVS__)
-#  include <windows.h>
+#   pragma map(deflateInit_,"DEIN")
-#  define EXPORT  WINAPI
+#   pragma map(deflateInit2_,"DEIN2")
-#else
+#   pragma map(deflateEnd,"DEEND")
-#  define EXPORT
+#   pragma map(inflateInit_,"ININ")
+#   pragma map(inflateInit2_,"ININ2")
+#   pragma map(inflateEnd,"INEND")
+#   pragma map(inflateSync,"INSY")
+#   pragma map(inflateSetDictionary,"INSEDI")
+#   pragma map(inflate_blocks,"INBL")
+#   pragma map(inflate_blocks_new,"INBLNE")
+#   pragma map(inflate_blocks_free,"INBLFR")
+#   pragma map(inflate_blocks_reset,"INBLRE")
+#   pragma map(inflate_codes_free,"INCOFR")
+#   pragma map(inflate_codes,"INCO")
+#   pragma map(inflate_fast,"INFA")
+#   pragma map(inflate_flush,"INFLU")
+#   pragma map(inflate_mask,"INMA")
+#   pragma map(inflate_set_dictionary,"INSEDI2")
+#   pragma map(inflate_copyright,"INCOPY")
+#   pragma map(inflate_trees_bits,"INTRBI")
+#   pragma map(inflate_trees_dynamic,"INTRDY")
+#   pragma map(inflate_trees_fixed,"INTRFI")
+#   pragma map(inflate_trees_free,"INTRFR")
 #endif
 
 #endif /* _ZCONF_H */

zlib.3

@@ -0,0 +1,107 @@
+.TH ZLIB 3 "27 February 1998"
+.SH NAME
+zlib \- compression/decompression library
+.SH SYNOPSIS
+[see
+.I zlib.h
+for full description]
+.SH DESCRIPTION
+The
+.I zlib
+library is a general purpose data compression library.
+The code is thread safe.
+It provides in-memory compression and decompression functions,
+including integrity checks of the uncompressed data.
+This version of the library supports only one compression method (deflation)
+but other algorithms will be added later and will have the same stream interface.
+.LP
+Compression can be done in a single step if the buffers are large enough
+(for example if an input file is mmap'ed),
+or can be done by repeated calls of the compression function.
+In the latter case,
+the application must provide more input and/or consume the output
+(providing more output space) before each call.
+.LP
+The library also supports reading and writing files in
+.I gzip
+(.gz) format
+with an interface similar to that of stdio.
+.LP
+The library does not install any signal handler. The decoder checks
+the consistency of the compressed data, so the library should never
+crash even in case of corrupted input.
+.LP
+All functions of the compression library are documented in the file
+.IR zlib.h.
+The distribution source includes examples of use of the library
+the files
+.I example.c
+and
+.IR minigzip.c .
+.LP
+A Java implementation of
+.IR zlib
+is available in the Java Development Kit 1.1
+.IP
+http://www.javasoft.com/products/JDK/1.1/docs/api/Package-java.util.zip.html
+.LP
+A Perl interface to
+.IR zlib ,
+written by Paul Marquess (pmarquess@bfsec.bt.co.uk)
+is available at CPAN (Comprehensive Perl Archive Network) sites,
+such as:
+.IP
+ftp://ftp.cis.ufl.edu/pub/perl/CPAN/modules/by-module/Compress/Compress-Zlib*
+.LP
+A Python interface to
+.IR zlib
+written by A.M. Kuchling <amk@magnet.com>
+is available from the Python Software Association sites, such as:
+.IP
+ftp://ftp.python.org/pub/python/contrib/Encoding/zlib*.tar.gz
+.SH "SEE ALSO"
+Questions about zlib should be sent to:
+.IP
+zlib@quest.jpl.nasa.gov
+or, if this fails, to the author addresses given below.
+The zlib home page is:
+.IP
+http://www.cdrom.com/pub/infozip/zlib/
+.LP
+The data format used by the zlib library is described by RFC
+(Request for Comments) 1950 to 1952 in the files: 
+.IP
+ftp://ds.internic.net/rfc/rfc1950.txt (zlib format)
+.br
+rfc1951.txt (deflate format)
+.br
+rfc1952.txt (gzip format)
+.LP
+These documents are also available in other formats from:
+.IP
+ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
+.SH AUTHORS
+Version 1.1.1
+Copyright (C) 1995-1998 Jean-loup Gailly (jloup@gzip.org)
+and Mark Adler (madler@alumni.caltech.edu).
+.LP
+This software is provided "as-is,"
+without any express or implied warranty.
+In no event will the authors be held liable for any damages
+arising from the use of this software.
+See the distribution directory with respect to requirements
+governing redistribution.
+The deflate format used by
+.I zlib
+was defined by Phil Katz.
+The deflate and
+.I zlib
+specifications were written by Peter Deutsch.
+Thanks to all the people who reported problems and suggested various
+improvements in
+.IR zlib ;
+who are too numerous to cite here.
+.LP
+UNIX manual page by R. P. C. Rodgers,
+U.S. National Library of Medicine (rodgers@nlm.nih.gov).
+.\" end of man page

zlib.def

@@ -1,46 +0,0 @@
-LIBRARY		"zlib"
-
-DESCRIPTION	'"""zlib data compression library"""'
-
-EXETYPE		NT
-
-SUBSYSTEM	WINDOWS
-
-STUB		'WINSTUB.EXE'
-
-VERSION		1.05
-
-CODE		 EXECUTE READ
-
-DATA		 READ WRITE
-
-HEAPSIZE	1048576,4096
-
-EXPORTS
-		zlibVersion
-		deflate
-		deflateEnd
-		inflate
-		inflateEnd
-		deflateSetDictionary
-		deflateCopy
-		deflateReset
-		deflateParams
-		inflateSetDictionary
-		inflateSync
-		inflateReset
-		compress
-		uncompress
-		gzopen
-		gzdopen
-		gzread
-		gzwrite
-		gzflush
-		gzclose
-		gzerror
-		adler32
-		crc32
-		deflateInit_
-		inflateInit_
-		deflateInit2_
-		inflateInit2_

zlib.h

@@ -1,5 +1,5 @@
 /* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.0.5, Jan 3rd, 1998.
+  version 1.1.1, Feb 27th, 1998
 
   Copyright (C) 1995-1998 Jean-loup Gailly and Mark Adler
 
@@ -20,7 +20,7 @@
   3. This notice may not be removed or altered from any source distribution.
 
   Jean-loup Gailly        Mark Adler
-  gzip@prep.ai.mit.edu    madler@alumni.caltech.edu
+  jloup@gzip.org          madler@alumni.caltech.edu
 
 
   The data format used by the zlib library is described by RFCs (Request for
@@ -37,30 +37,27 @@ extern "C" {
 
 #include "zconf.h"
 
-#define ZLIB_VERSION "1.0.5"
+#define ZLIB_VERSION "1.1.1"
 
 /* 
      The 'zlib' compression library provides in-memory compression and
   decompression functions, including integrity checks of the uncompressed
   data.  This version of the library supports only one compression method
-  (deflation) but other algorithms may be added later and will have the same
+  (deflation) but other algorithms will be added later and will have the same
   stream interface.
 
-     For compression the application must provide the output buffer and
-  may optionally provide the input buffer for optimization. For decompression,
-  the application must provide the input buffer and may optionally provide
-  the output buffer for optimization.
-
      Compression can be done in a single step if the buffers are large
   enough (for example if an input file is mmap'ed), or can be done by
   repeated calls of the compression function.  In the latter case, the
   application must provide more input and/or consume the output
   (providing more output space) before each call.
 
-     The library does not install any signal handler. It is recommended to
+     The library also supports reading and writing files in gzip (.gz) format
-  add at least a handler for SIGSEGV when decompressing; the library checks
+  with an interface similar to that of stdio.
-  the consistency of the input data whenever possible but may go nuts
+
-  for some forms of corrupted input.
+     The library does not install any signal handler. The decoder checks
+  the consistency of the compressed data, so the library should never
+  crash even in case of corrupted input.
 */
 
 typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
@@ -104,6 +101,9 @@ typedef z_stream FAR *z_streamp;
    opaque value.
 
    zalloc must return Z_NULL if there is not enough memory for the object.
+   If zlib is used in a multi-threaded application, zalloc and zfree must be
+   thread safe.
+
    On 16-bit systems, the functions zalloc and zfree must be able to allocate
    exactly 65536 bytes, but will not be required to allocate more than this
    if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
@@ -123,7 +123,7 @@ typedef z_stream FAR *z_streamp;
                         /* constants */
 
 #define Z_NO_FLUSH      0
-#define Z_PARTIAL_FLUSH 1
+#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */
 #define Z_SYNC_FLUSH    2
 #define Z_FULL_FLUSH    3
 #define Z_FINISH        4
@@ -168,7 +168,7 @@ typedef z_stream FAR *z_streamp;
 
                         /* basic functions */
 
-extern const char * EXPORT zlibVersion OF((void));
+extern const char * ZEXPORT zlibVersion OF((void));
 /* The application can compare zlibVersion and ZLIB_VERSION for consistency.
    If the first character differs, the library code actually used is
    not compatible with the zlib.h header file used by the application.
@@ -176,7 +176,7 @@ extern const char * EXPORT zlibVersion OF((void));
  */
 
 /* 
-extern int EXPORT deflateInit OF((z_streamp strm, int level));
+extern int ZEXPORT deflateInit OF((z_streamp strm, int level));
 
      Initializes the internal stream state for compression. The fields
    zalloc, zfree and opaque must be initialized before by the caller.
@@ -198,9 +198,15 @@ extern int EXPORT deflateInit OF((z_streamp strm, int level));
 */
 
 
-extern int EXPORT deflate OF((z_streamp strm, int flush));
+extern int ZEXPORT deflate OF((z_streamp strm, int flush));
 /*
-  Performs one or both of the following actions:
+    deflate compresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full. It may introduce some
+  output latency (reading input without producing any output) except when
+  forced to flush.
+
+    The detailed semantics are as follows. deflate performs one or both of the
+  following actions:
 
   - Compress more input starting at next_in and update next_in and avail_in
     accordingly. If not all input can be processed (because there is not
@@ -222,24 +228,23 @@ extern int EXPORT deflate OF((z_streamp strm, int flush));
   and with zero avail_out, it must be called again after making room in the
   output buffer because there might be more output pending.
 
-    If the parameter flush is set to Z_PARTIAL_FLUSH, the current compression
+    If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
-  block is terminated and flushed to the output buffer so that the
+  flushed to the output buffer and the output is aligned on a byte boundary, so
-  decompressor can get all input data available so far. For method 9, a future
+  that the decompressor can get all input data available so far. (In particular
-  variant on method 8, the current block will be flushed but not terminated.
+  avail_in is zero after the call if enough output space has been provided
-  Z_SYNC_FLUSH has the same effect as partial flush except that the compressed
+  before the call.)  Flushing may degrade compression for some compression
-  output is byte aligned (the compressor can clear its internal bit buffer)
+  algorithms and so it should be used only when necessary.
-  and the current block is always terminated; this can be useful if the
+
-  compressor has to be restarted from scratch after an interruption (in which
+    If flush is set to Z_FULL_FLUSH, all output is flushed as with
-  case the internal state of the compressor may be lost).
+  Z_SYNC_FLUSH, and the compression state is reset so that decompression can
-    If flush is set to Z_FULL_FLUSH, the compression block is terminated, a
+  restart from this point if previous compressed data has been damaged or if
-  special marker is output and the compression dictionary is discarded; this
+  random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
-  is useful to allow the decompressor to synchronize if one compressed block
+  the compression.
-  has been damaged (see inflateSync below).  Flushing degrades compression and
+
-  so should be used only when necessary.  Using Z_FULL_FLUSH too often can
+    If deflate returns with avail_out == 0, this function must be called again
-  seriously degrade the compression. If deflate returns with avail_out == 0,
+  with the same value of the flush parameter and more output space (updated
-  this function must be called again with the same value of the flush
+  avail_out), until the flush is complete (deflate returns with non-zero
-  parameter and more output space (updated avail_out), until the flush is
+  avail_out).
-  complete (deflate returns with non-zero avail_out).
 
     If the parameter flush is set to Z_FINISH, pending input is processed,
   pending output is flushed and deflate returns with Z_STREAM_END if there
@@ -254,6 +259,9 @@ extern int EXPORT deflate OF((z_streamp strm, int flush));
   0.1% larger than avail_in plus 12 bytes.  If deflate does not return
   Z_STREAM_END, then it must be called again as described above.
 
+    deflate() sets strm->adler to the adler32 checksum of all input read
+  so far (that is, total_in bytes).
+
     deflate() may update data_type if it can make a good guess about
   the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
   binary. This field is only for information purposes and does not affect
@@ -267,7 +275,7 @@ extern int EXPORT deflate OF((z_streamp strm, int flush));
 */
 
 
-extern int EXPORT deflateEnd OF((z_streamp strm));
+extern int ZEXPORT deflateEnd OF((z_streamp strm));
 /*
      All dynamically allocated data structures for this stream are freed.
    This function discards any unprocessed input and does not flush any
@@ -282,24 +290,35 @@ extern int EXPORT deflateEnd OF((z_streamp strm));
 
 
 /* 
-extern int EXPORT inflateInit OF((z_streamp strm));
+extern int ZEXPORT inflateInit OF((z_streamp strm));
 
      Initializes the internal stream state for decompression. The fields
-   zalloc, zfree and opaque must be initialized before by the caller.  If
+   next_in, avail_in, zalloc, zfree and opaque must be initialized before by
-   zalloc and zfree are set to Z_NULL, inflateInit updates them to use default
+   the caller. If next_in is not Z_NULL and avail_in is large enough (the exact
-   allocation functions.
+   value depends on the compression method), inflateInit determines the
+   compression method from the zlib header and allocates all data structures
+   accordingly; otherwise the allocation will be deferred to the first call of
+   inflate.  If zalloc and zfree are set to Z_NULL, inflateInit updates them to
+   use default allocation functions.
 
-     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
+     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
-   enough memory, Z_VERSION_ERROR if the zlib library version is incompatible
+   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
-   with the version assumed by the caller.  msg is set to null if there is no
+   version assumed by the caller.  msg is set to null if there is no error
-   error message. inflateInit does not perform any decompression: this will be
+   message. inflateInit does not perform any decompression apart from reading
-   done by inflate().
+   the zlib header if present: this will be done by inflate().  (So next_in and
+   avail_in may be modified, but next_out and avail_out are unchanged.)
 */
 
 
-extern int EXPORT inflate OF((z_streamp strm, int flush));
+extern int ZEXPORT inflate OF((z_streamp strm, int flush));
 /*
-  Performs one or both of the following actions:
+    inflate decompresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full. It may some
+  introduce some output latency (reading input without producing any output)
+  except when forced to flush.
+
+  The detailed semantics are as follows. inflate performs one or both of the
+  following actions:
 
   - Decompress more input starting at next_in and update next_in and avail_in
     accordingly. If not all input can be processed (because there is not
@@ -320,9 +339,9 @@ extern int EXPORT inflate OF((z_streamp strm, int flush));
   must be called again after making room in the output buffer because there
   might be more output pending.
 
-    If the parameter flush is set to Z_PARTIAL_FLUSH, inflate flushes as much
+    If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much
   output as possible to the output buffer. The flushing behavior of inflate is
-  not specified for values of the flush parameter other than Z_PARTIAL_FLUSH
+  not specified for values of the flush parameter other than Z_SYNC_FLUSH
   and Z_FINISH, but the current implementation actually flushes as much output
   as possible anyway.
 
@@ -337,22 +356,30 @@ extern int EXPORT inflate OF((z_streamp strm, int flush));
   is never required, but can be used to inform inflate that a faster routine
   may be used for the single inflate() call.
 
-    inflate() returns Z_OK if some progress has been made (more input
+     If a preset dictionary is needed at this point (see inflateSetDictionary
-  processed or more output produced), Z_STREAM_END if the end of the
+  below), inflate sets strm-adler to the adler32 checksum of the
-  compressed data has been reached and all uncompressed output has been
+  dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise 
-  produced, Z_NEED_DICT if a preset dictionary is needed at this point (see
+  it sets strm->adler to the adler32 checksum of all output produced
-  inflateSetDictionary below), Z_DATA_ERROR if the input data was corrupted,
+  so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or
-  Z_STREAM_ERROR if the stream structure was inconsistent (for example if
+  an error code as described below. At the end of the stream, inflate()
-  next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory,
+  checks that its computed adler32 checksum is equal to that saved by the
-  Z_BUF_ERROR if no progress is possible or if there was not enough room in
+  compressor and returns Z_STREAM_END only if the checksum is correct.
-  the output buffer when Z_FINISH is used. In the Z_DATA_ERROR case, the
+
-  application may then call inflateSync to look for a good compression block.
+    inflate() returns Z_OK if some progress has been made (more input processed
-  In the Z_NEED_DICT case, strm->adler is set to the Adler32 value of the
+  or more output produced), Z_STREAM_END if the end of the compressed data has
-  dictionary chosen by the compressor.
+  been reached and all uncompressed output has been produced, Z_NEED_DICT if a
+  preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
+  corrupted (input stream not conforming to the zlib format or incorrect
+  adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent
+  (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not
+  enough memory, Z_BUF_ERROR if no progress is possible or if there was not
+  enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR
+  case, the application may then call inflateSync to look for a good
+  compression block.
 */
 
 
-extern int EXPORT inflateEnd OF((z_streamp strm));
+extern int ZEXPORT inflateEnd OF((z_streamp strm));
 /*
      All dynamically allocated data structures for this stream are freed.
    This function discards any unprocessed input and does not flush any
@@ -370,26 +397,25 @@ extern int EXPORT inflateEnd OF((z_streamp strm));
 */
 
 /*   
-extern int EXPORT deflateInit2 OF((z_streamp strm,
+extern int ZEXPORT deflateInit2 OF((z_streamp strm,
-                                   int  level,
+                                    int  level,
-                                   int  method,
+                                    int  method,
-                                   int  windowBits,
+                                    int  windowBits,
-                                   int  memLevel,
+                                    int  memLevel,
-                                   int  strategy));
+                                    int  strategy));
 
      This is another version of deflateInit with more compression options. The
    fields next_in, zalloc, zfree and opaque must be initialized before by
    the caller.
 
      The method parameter is the compression method. It must be Z_DEFLATED in
-   this version of the library. (Method 9 will allow a 64K history buffer and
+   this version of the library.
-   partial block flushes.)
 
      The windowBits parameter is the base two logarithm of the window size
    (the size of the history buffer).  It should be in the range 8..15 for this
-   version of the library (the value 16 will be allowed for method 9). Larger
+   version of the library. Larger values of this parameter result in better
-   values of this parameter result in better compression at the expense of
+   compression at the expense of memory usage. The default value is 15 if
-   memory usage. The default value is 15 if deflateInit is used instead.
+   deflateInit is used instead.
 
      The memLevel parameter specifies how much memory should be allocated
    for the internal compression state. memLevel=1 uses minimum memory but
@@ -408,42 +434,35 @@ extern int EXPORT deflateInit2 OF((z_streamp strm,
    the compression ratio but not the correctness of the compressed output even
    if it is not set appropriately.
 
-     If next_in is not null, the library will use this buffer to hold also
+      deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
-   some history information; the buffer must either hold the entire input
+   memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid
-   data, or have at least 1<<(windowBits+1) bytes and be writable. If next_in
+   method). msg is set to null if there is no error message.  deflateInit2 does
-   is null, the library will allocate its own history buffer (and leave next_in
+   not perform any compression: this will be done by deflate().
-   null). next_out need not be provided here but must be provided by the
-   application for the next call of deflate().
-
-     If the history buffer is provided by the application, next_in must
-   must never be changed by the application since the compressor maintains
-   information inside this buffer from call to call; the application
-   must provide more input only by increasing avail_in. next_in is always
-   reset by the library in this case.
-
-      deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
-   not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
-   an invalid method). msg is set to null if there is no error message.
-   deflateInit2 does not perform any compression: this will be done by
-   deflate(). 
 */
                             
-extern int EXPORT deflateSetDictionary OF((z_streamp strm,
+extern int ZEXPORT deflateSetDictionary OF((z_streamp strm,
-                                           const Bytef *dictionary,
+                                            const Bytef *dictionary,
-				           uInt  dictLength));
+                                            uInt  dictLength));
 /*
-     Initializes the compression dictionary (history buffer) from the given
+     Initializes the compression dictionary from the given byte sequence
-   byte sequence without producing any compressed output. This function must
+   without producing any compressed output. This function must be called
-   be called immediately after deflateInit or deflateInit2, before any call
+   immediately after deflateInit or deflateInit2, before any call of
-   of deflate. The compressor and decompressor must use exactly the same
+   deflate. The compressor and decompressor must use exactly the same
    dictionary (see inflateSetDictionary).
+
      The dictionary should consist of strings (byte sequences) that are likely
    to be encountered later in the data to be compressed, with the most commonly
    used strings preferably put towards the end of the dictionary. Using a
-   dictionary is most useful when the data to be compressed is short and
+   dictionary is most useful when the data to be compressed is short and can be
-   can be predicted with good accuracy; the data can then be compressed better
+   predicted with good accuracy; the data can then be compressed better than
-   than with the default empty dictionary. In this version of the library,
+   with the default empty dictionary.
-   only the last 32K bytes of the dictionary are used.
+
+     Depending on the size of the compression data structures selected by
+   deflateInit or deflateInit2, a part of the dictionary may in effect be
+   discarded, for example if the dictionary is larger than the window size in
+   deflate or deflate2. Thus the strings most likely to be useful should be
+   put at the end of the dictionary, not at the front.
+
      Upon return of this function, strm->adler is set to the Adler32 value
    of the dictionary; the decompressor may later use this value to determine
    which dictionary has been used by the compressor. (The Adler32 value
@@ -451,21 +470,16 @@ extern int EXPORT deflateSetDictionary OF((z_streamp strm,
    actually used by the compressor.)
 
      deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
-   parameter is invalid (such as NULL dictionary) or the stream state
+   parameter is invalid (such as NULL dictionary) or the stream state is
-   is inconsistent (for example if deflate has already been called for this
+   inconsistent (for example if deflate has already been called for this stream
-   stream). deflateSetDictionary does not perform any compression: this will
+   or if the compression method is bsort). deflateSetDictionary does not
-   be done by deflate(). 
+   perform any compression: this will be done by deflate().
 */
 
-extern int EXPORT deflateCopy OF((z_streamp dest,
+extern int ZEXPORT deflateCopy OF((z_streamp dest,
-                                  z_streamp source));
+                                   z_streamp source));
 /*
-     Sets the destination stream as a complete copy of the source stream.  If
+     Sets the destination stream as a complete copy of the source stream.
-   the source stream is using an application-supplied history buffer, a new
-   buffer is allocated for the destination stream.  The compressed output
-   buffer is always application-supplied. It's the responsibility of the
-   application to provide the correct values of next_out and avail_out for the
-   next call of deflate.
 
      This function can be useful when several compression strategies will be
    tried, for example when there are several ways of pre-processing the input
@@ -480,7 +494,7 @@ extern int EXPORT deflateCopy OF((z_streamp dest,
    destination.
 */
 
-extern int EXPORT deflateReset OF((z_streamp strm));
+extern int ZEXPORT deflateReset OF((z_streamp strm));
 /*
      This function is equivalent to deflateEnd followed by deflateInit,
    but does not free and reallocate all the internal compression state.
@@ -491,14 +505,15 @@ extern int EXPORT deflateReset OF((z_streamp strm));
    stream state was inconsistent (such as zalloc or state being NULL).
 */
 
-extern int EXPORT deflateParams OF((z_streamp strm, int level, int strategy));
+extern int ZEXPORT deflateParams OF((z_streamp strm, int level, int strategy));
 /*
-     Dynamically update the compression level and compression strategy.
+     Dynamically update the compression level and compression strategy.  The
-   This can be used to switch between compression and straight copy of
+   interpretation of level and strategy is as in deflateInit2.  This can be
-   the input data, or to switch to a different kind of input data requiring
+   used to switch between compression and straight copy of the input data, or
-   a different strategy. If the compression level is changed, the input
+   to switch to a different kind of input data requiring a different
-   available so far is compressed with the old level (and may be flushed);
+   strategy. If the compression level is changed, the input available so far
-   the new level will take effect only at the next call of deflate().
+   is compressed with the old level (and may be flushed); the new level will
+   take effect only at the next call of deflate().
 
      Before the call of deflateParams, the stream state must be set as for
    a call of deflate(), since the currently available input may have to
@@ -510,49 +525,37 @@ extern int EXPORT deflateParams OF((z_streamp strm, int level, int strategy));
 */
 
 /*   
-extern int EXPORT inflateInit2 OF((z_streamp strm,
+extern int ZEXPORT inflateInit2 OF((z_streamp strm,
-                                   int  windowBits));
+                                    int  windowBits));
 
-     This is another version of inflateInit with more compression options. The
+     This is another version of inflateInit with an extra parameter. The
-   fields next_out, zalloc, zfree and opaque must be initialized before by
+   fields next_in, avail_in, zalloc, zfree and opaque must be initialized
-   the caller.
+   before by the caller.
 
      The windowBits parameter is the base two logarithm of the maximum window
    size (the size of the history buffer).  It should be in the range 8..15 for
-   this version of the library (the value 16 will be allowed soon). The
+   this version of the library. The default value is 15 if inflateInit is used
-   default value is 15 if inflateInit is used instead. If a compressed stream
+   instead. If a compressed stream with a larger window size is given as
-   with a larger window size is given as input, inflate() will return with
+   input, inflate() will return with the error code Z_DATA_ERROR instead of
-   the error code Z_DATA_ERROR instead of trying to allocate a larger window.
+   trying to allocate a larger window.
 
-     If next_out is not null, the library will use this buffer for the history
+      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
-   buffer; the buffer must either be large enough to hold the entire output
+   memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative
-   data, or have at least 1<<windowBits bytes.  If next_out is null, the
+   memLevel). msg is set to null if there is no error message.  inflateInit2
-   library will allocate its own buffer (and leave next_out null). next_in
+   does not perform any decompression apart from reading the zlib header if
-   need not be provided here but must be provided by the application for the
+   present: this will be done by inflate(). (So next_in and avail_in may be
-   next call of inflate().
+   modified, but next_out and avail_out are unchanged.)
-
-     If the history buffer is provided by the application, next_out must
-   never be changed by the application since the decompressor maintains
-   history information inside this buffer from call to call; the application
-   can only reset next_out to the beginning of the history buffer when
-   avail_out is zero and all output has been consumed.
-
-      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
-   not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
-   windowBits < 8). msg is set to null if there is no error message.
-   inflateInit2 does not perform any decompression: this will be done by
-   inflate().
 */
 
-extern int EXPORT inflateSetDictionary OF((z_streamp strm,
+extern int ZEXPORT inflateSetDictionary OF((z_streamp strm,
-				           const Bytef *dictionary,
+                                            const Bytef *dictionary,
-					   uInt  dictLength));
+                                            uInt  dictLength));
 /*
-     Initializes the decompression dictionary (history buffer) from the given
+     Initializes the decompression dictionary from the given uncompressed byte
-   uncompressed byte sequence. This function must be called immediately after
+   sequence. This function must be called immediately after a call of inflate
-   a call of inflate if this call returned Z_NEED_DICT. The dictionary chosen
+   if this call returned Z_NEED_DICT. The dictionary chosen by the compressor
-   by the compressor can be determined from the Adler32 value returned by this
+   can be determined from the Adler32 value returned by this call of
-   call of inflate. The compressor and decompressor must use exactly the same
+   inflate. The compressor and decompressor must use exactly the same
    dictionary (see deflateSetDictionary).
 
      inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
@@ -563,14 +566,14 @@ extern int EXPORT inflateSetDictionary OF((z_streamp strm,
    inflate().
 */
 
-extern int EXPORT inflateSync OF((z_streamp strm));
+extern int ZEXPORT inflateSync OF((z_streamp strm));
 /* 
-    Skips invalid compressed data until the special marker (see deflate()
+    Skips invalid compressed data until a full flush point (see above the
-  above) can be found, or until all available input is skipped. No output
+  description of deflate with Z_FULL_FLUSH) can be found, or until all
-  is provided.
+  available input is skipped. No output is provided.
 
-    inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR
+    inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
-  if no more input was provided, Z_DATA_ERROR if no marker has been found,
+  if no more input was provided, Z_DATA_ERROR if no flush point has been found,
   or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
   case, the application may save the current current value of total_in which
   indicates where valid compressed data was found. In the error case, the
@@ -578,7 +581,7 @@ extern int EXPORT inflateSync OF((z_streamp strm));
   until success or end of the input data.
 */
 
-extern int EXPORT inflateReset OF((z_streamp strm));
+extern int ZEXPORT inflateReset OF((z_streamp strm));
 /*
      This function is equivalent to inflateEnd followed by inflateInit,
    but does not free and reallocate all the internal decompression state.
@@ -594,13 +597,13 @@ extern int EXPORT inflateReset OF((z_streamp strm));
 /*
      The following utility functions are implemented on top of the
    basic stream-oriented functions. To simplify the interface, some
-   default options are assumed (compression level, window size,
+   default options are assumed (compression level and memory usage,
    standard memory allocation functions). The source code of these
    utility functions can easily be modified if you need special options.
 */
 
-extern int EXPORT compress OF((Bytef *dest,   uLongf *destLen,
+extern int ZEXPORT compress OF((Bytef *dest,   uLongf *destLen,
-			       const Bytef *source, uLong sourceLen));
+                                const Bytef *source, uLong sourceLen));
 /*
      Compresses the source buffer into the destination buffer.  sourceLen is
    the byte length of the source buffer. Upon entry, destLen is the total
@@ -614,8 +617,23 @@ extern int EXPORT compress OF((Bytef *dest,   uLongf *destLen,
    buffer.
 */
 
-extern int EXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
+extern int ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
-				 const Bytef *source, uLong sourceLen));
+                                 const Bytef *source, uLong sourceLen,
+                                 int level));
+/*
+     Compresses the source buffer into the destination buffer. The level
+   parameter has the same meaning as in deflateInit.  sourceLen is the byte
+   length of the source buffer. Upon entry, destLen is the total size of the
+   destination buffer, which must be at least 0.1% larger than sourceLen plus
+   12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+
+     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+   Z_STREAM_ERROR if the level parameter is invalid.
+*/
+
+extern int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
+                                  const Bytef *source, uLong sourceLen));
 /*
      Decompresses the source buffer into the destination buffer.  sourceLen is
    the byte length of the source buffer. Upon entry, destLen is the total
@@ -635,19 +653,23 @@ extern int EXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
 
 typedef voidp gzFile;
 
-extern gzFile EXPORT gzopen  OF((const char *path, const char *mode));
+extern gzFile ZEXPORT gzopen  OF((const char *path, const char *mode));
 /*
      Opens a gzip (.gz) file for reading or writing. The mode parameter
    is as in fopen ("rb" or "wb") but can also include a compression level
-   ("wb9").  gzopen can be used to read a file which is not in gzip format;
+   ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for
-   in this case gzread will directly read from the file without decompression.
+   Huffman only compression as in "wb1h". (See the description
+   of deflateInit2 for more information about the strategy parameter.)
+
+     gzopen can be used to read a file which is not in gzip format; in this
+   case gzread will directly read from the file without decompression.
+
      gzopen returns NULL if the file could not be opened or if there was
    insufficient memory to allocate the (de)compression state; errno
    can be checked to distinguish the two cases (if errno is zero, the
-   zlib error is Z_MEM_ERROR).
+   zlib error is Z_MEM_ERROR).  */
-*/
 
-extern gzFile EXPORT gzdopen  OF((int fd, const char *mode));
+extern gzFile ZEXPORT gzdopen  OF((int fd, const char *mode));
 /*
      gzdopen() associates a gzFile with the file descriptor fd.  File
    descriptors are obtained from calls like open, dup, creat, pipe or
@@ -660,7 +682,15 @@ extern gzFile EXPORT gzdopen  OF((int fd, const char *mode));
    the (de)compression state.
 */
 
-extern int EXPORT    gzread  OF((gzFile file, voidp buf, unsigned len));
+extern int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
+/*
+     Dynamically update the compression level or strategy. See the description
+   of deflateInit2 for the meaning of these parameters.
+     gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not
+   opened for writing.
+*/
+
+extern int ZEXPORT    gzread  OF((gzFile file, voidp buf, unsigned len));
 /*
      Reads the given number of uncompressed bytes from the compressed file.
    If the input file was not in gzip format, gzread copies the given number
@@ -668,14 +698,49 @@ extern int EXPORT    gzread  OF((gzFile file, voidp buf, unsigned len));
      gzread returns the number of uncompressed bytes actually read (0 for
    end of file, -1 for error). */
 
-extern int EXPORT    gzwrite OF((gzFile file, const voidp buf, unsigned len));
+extern int ZEXPORT    gzwrite OF((gzFile file, const voidp buf, unsigned len));
 /*
      Writes the given number of uncompressed bytes into the compressed file.
    gzwrite returns the number of uncompressed bytes actually written
    (0 in case of error).
 */
 
-extern int EXPORT    gzflush OF((gzFile file, int flush));
+extern int ZEXPORTVA   gzprintf OF((gzFile file, const char *format, ...));
+/*
+     Converts, formats, and writes the args to the compressed file under
+   control of the format string, as in fprintf. gzprintf returns the number of
+   uncompressed bytes actually written (0 in case of error).
+*/
+
+extern int ZEXPORT gzputs OF((gzFile file, const char *s));
+/*
+      Writes the given null-terminated string to the compressed file, excluding
+   the terminating null character.
+      gzputs returns the number of characters written, or -1 in case of error.
+*/
+
+extern char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
+/*
+      Reads bytes from the compressed file until len-1 characters are read, or
+   a newline character is read and transferred to buf, or an end-of-file
+   condition is encountered.  The string is then terminated with a null
+   character.
+      gzgets returns buf, or Z_NULL in case of error.
+*/
+
+extern int ZEXPORT    gzputc OF((gzFile file, int c));
+/*
+      Writes c, converted to an unsigned char, into the compressed file.
+   gzputc returns the value that was written, or -1 in case of error.
+*/
+
+extern int ZEXPORT    gzgetc OF((gzFile file));
+/*
+      Reads one byte from the compressed file. gzgetc returns this byte
+   or -1 in case of end of file or error.
+*/
+
+extern int ZEXPORT    gzflush OF((gzFile file, int flush));
 /*
      Flushes all pending output into the compressed file. The parameter
    flush is as in the deflate() function. The return value is the zlib
@@ -685,14 +750,53 @@ extern int EXPORT    gzflush OF((gzFile file, int flush));
    degrade compression.
 */
 
-extern int EXPORT    gzclose OF((gzFile file));
+extern z_off_t ZEXPORT    gzseek OF((gzFile file, z_off_t offset, int whence));
+/* 
+      Sets the starting position for the next gzread or gzwrite on the given
+   compressed file. The offset represents a number of bytes in the
+   uncompressed data stream. The whence parameter is defined as in lseek(2);
+   the value SEEK_END is not supported.
+     If the file is opened for reading, this function is emulated but can be
+   extremely slow. If the file is opened for writing, only forward seeks are
+   supported; gzseek then compresses a sequence of zeroes up to the new
+   starting position.
+
+      gzseek returns the resulting offset location as measured in bytes from
+   the beginning of the uncompressed stream, or -1 in case of error, in
+   particular if the file is opened for writing and the new starting position
+   would be before the current position.
+*/
+
+extern int ZEXPORT    gzrewind OF((gzFile file));
+/*
+     Rewinds the given file. This function is supported only for reading.
+
+   gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
+*/
+
+extern z_off_t ZEXPORT    gztell OF((gzFile file));
+/*
+     Returns the starting position for the next gzread or gzwrite on the
+   given compressed file. This position represents a number of bytes in the
+   uncompressed data stream.
+
+   gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
+*/
+
+extern int ZEXPORT gzeof OF((gzFile file));
+/*
+     Returns 1 when EOF has previously been detected reading the given
+   input stream, otherwise zero.
+*/
+
+extern int ZEXPORT    gzclose OF((gzFile file));
 /*
      Flushes all pending output if necessary, closes the compressed file
    and deallocates all the (de)compression state. The return value is the zlib
    error number (see function gzerror below).
 */
 
-extern const char * EXPORT gzerror OF((gzFile file, int *errnum));
+extern const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
 /*
      Returns the error message for the last error which occurred on the
    given compressed file. errnum is set to zlib error number. If an
@@ -709,7 +813,7 @@ extern const char * EXPORT gzerror OF((gzFile file, int *errnum));
    compression library.
 */
 
-extern uLong EXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
+extern uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
 
 /*
      Update a running Adler-32 checksum with the bytes buf[0..len-1] and
@@ -726,7 +830,7 @@ extern uLong EXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
      if (adler != original_adler) error();
 */
 
-extern uLong EXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
+extern uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
 /*
      Update a running crc with the bytes buf[0..len-1] and return the updated
    crc. If buf is NULL, this function returns the required initial value
@@ -748,30 +852,34 @@ extern uLong EXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
 /* deflateInit and inflateInit are macros to allow checking the zlib version
  * and the compiler's view of z_stream:
  */
-extern int EXPORT deflateInit_ OF((z_streamp strm, int level,
+extern int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
-			           const char *version, int stream_size));
+                                    const char *version, int stream_size));
-extern int EXPORT inflateInit_ OF((z_streamp strm,
+extern int ZEXPORT inflateInit_ OF((z_streamp strm,
-				   const char *version, int stream_size));
+                                    const char *version, int stream_size));
-extern int EXPORT deflateInit2_ OF((z_streamp strm, int  level, int  method,
+extern int ZEXPORT deflateInit2_ OF((z_streamp strm, int  level, int  method,
-				    int windowBits, int memLevel, int strategy,
+                                     int windowBits, int memLevel,
-				    const char *version, int stream_size));
+                                     int strategy, const char *version,
-extern int EXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
+                                     int stream_size));
-				    const char *version, int stream_size));
+extern int ZEXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
+                                     const char *version, int stream_size));
 #define deflateInit(strm, level) \
         deflateInit_((strm), (level),       ZLIB_VERSION, sizeof(z_stream))
 #define inflateInit(strm) \
         inflateInit_((strm),                ZLIB_VERSION, sizeof(z_stream))
 #define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
         deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
-		      (strategy),           ZLIB_VERSION, sizeof(z_stream))
+                      (strategy),           ZLIB_VERSION, sizeof(z_stream))
 #define inflateInit2(strm, windowBits) \
         inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
 
+
 #if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL)
     struct internal_state {int dummy;}; /* hack for buggy compilers */
 #endif
 
-uLongf *get_crc_table OF((void)); /* can be used by asm versions of crc32() */
+extern const char   * ZEXPORT zError           OF((int err));
+extern int            ZEXPORT inflateSyncPoint OF((z_streamp z));
+extern const uLongf * ZEXPORT get_crc_table    OF((void));
 
 #ifdef __cplusplus
 }

zutil.c

@@ -1,11 +1,9 @@
 /* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
+ * Copyright (C) 1995-1998 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
-/* $Id: zutil.c,v 1.17 1996/07/24 13:41:12 me Exp $ */
+/* @(#) $Id$ */
-
-#include <stdio.h>
 
 #include "zutil.h"
 
@@ -28,12 +26,18 @@ const char *z_errmsg[10] = {
 ""};
 
 
-const char *zlibVersion()
+const char * ZEXPORT zlibVersion()
 {
     return ZLIB_VERSION;
 }
 
 #ifdef DEBUG
+
+#  ifndef verbose
+#    define verbose 0
+#  endif
+int z_verbose = verbose;
+
 void z_error (m)
     char *m;
 {
@@ -42,6 +46,16 @@ void z_error (m)
 }
 #endif
 
+/* exported to allow conversion of error code to string for compress() and
+ * uncompress()
+ */
+const char * ZEXPORT zError(err)
+    int err;
+{
+    return ERR_MSG(err);
+}
+
+
 #ifndef HAVE_MEMCPY
 
 void zmemcpy(dest, source, len)

zutil.h

@@ -1,5 +1,5 @@
 /* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
+ * Copyright (C) 1995-1998 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
@@ -8,23 +8,23 @@
    subject to change. Applications should only use zlib.h.
  */
 
-/* $Id: zutil.h,v 1.16 1996/07/24 13:41:13 me Exp $ */
+/* @(#) $Id$ */
 
 #ifndef _Z_UTIL_H
 #define _Z_UTIL_H
 
 #include "zlib.h"
 
-#if defined(MSDOS)||defined(VMS)||defined(CRAY)||defined(WIN32)||defined(RISCOS)
-#   include <stddef.h>
-#   include <errno.h>
-#else
-    extern int errno;
-#endif
 #ifdef STDC
+#  include <stddef.h>
 #  include <string.h>
 #  include <stdlib.h>
 #endif
+#ifdef NO_ERRNO_H
+    extern int errno;
+#else
+#   include <errno.h>
+#endif
 
 #ifndef local
 #  define local static
@@ -76,7 +76,13 @@ extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
 #ifdef MSDOS
 #  define OS_CODE  0x00
 #  ifdef __TURBOC__
-#    include <alloc.h>
+#    if(__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
+       /* Allow compilation with ANSI keywords only enabled */
+       void _Cdecl farfree( void *block );
+       void *_Cdecl farmalloc( unsigned long nbytes );
+#    else
+#     include <alloc.h>
+#    endif
 #  else /* MSC or DJGPP */
 #    include <malloc.h>
 #  endif
@@ -92,7 +98,7 @@ extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
 
 #if defined(VAXC) || defined(VMS)
 #  define OS_CODE  0x02
-#  define FOPEN(name, mode) \
+#  define F_OPEN(name, mode) \
      fopen((name), (mode), "mbc=60", "ctx=stm", "rfm=fix", "mrs=512")
 #endif
 
@@ -104,8 +110,16 @@ extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
 #  define OS_CODE  0x05
 #endif
 
-#ifdef MACOS
+#if defined(MACOS) || defined(TARGET_OS_MAC)
 #  define OS_CODE  0x07
+#  ifndef fdopen
+#    define fdopen(fd,mode) NULL /* No fdopen() */
+#  endif
+#endif
+#if defined(__MWERKS__) && !defined(fdopen)
+#  if __dest_os != __be_os && __dest_os != __win32_os
+#    define fdopen(fd,mode) NULL
+#  endif
 #endif
 
 #ifdef __50SERIES /* Prime/PRIMOS */
@@ -120,14 +134,19 @@ extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
 #  define fdopen(fd,mode) NULL /* No fdopen() */
 #endif
 
+#if (defined(_MSC_VER) && (_MSC_VER >= 600))
+#  define fdopen(fd,type)  _fdopen(fd,type)
+#endif
+
+
         /* Common defaults */
 
 #ifndef OS_CODE
 #  define OS_CODE  0x03  /* assume Unix */
 #endif
 
-#ifndef FOPEN
+#ifndef F_OPEN
-#  define FOPEN(name, mode) fopen((name), (mode))
+#  define F_OPEN(name, mode) fopen((name), (mode))
 #endif
 
          /* functions */
@@ -142,9 +161,10 @@ extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
 #if defined(pyr)
 #  define NO_MEMCPY
 #endif
-#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(_MSC_VER)
+#if defined(SMALL_MEDIUM) && !defined(_MSC_VER) && !defined(__SC__)
  /* Use our own functions for small and medium model with MSC <= 5.0.
   * You may have to use the same strategy for Borland C (untested).
+  * The __SC__ check is for Symantec.
   */
 #  define NO_MEMCPY
 #endif
@@ -170,16 +190,14 @@ extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
 /* Diagnostic functions */
 #ifdef DEBUG
 #  include <stdio.h>
-#  ifndef verbose
+   extern int z_verbose;
-#    define verbose 0
-#  endif
    extern void z_error    OF((char *m));
 #  define Assert(cond,msg) {if(!(cond)) z_error(msg);}
-#  define Trace(x) fprintf x
+#  define Trace(x) {if (z_verbose>=0) fprintf x ;}
-#  define Tracev(x) {if (verbose) fprintf x ;}
+#  define Tracev(x) {if (z_verbose>0) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
+#  define Tracevv(x) {if (z_verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
+#  define Tracec(c,x) {if (z_verbose>0 && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#  define Tracecv(c,x) {if (z_verbose>1 && (c)) fprintf x ;}
 #else
 #  define Assert(cond,msg)
 #  define Trace(x)
@@ -190,8 +208,8 @@ extern const char *z_errmsg[10]; /* indexed by 2-zlib_error */
 #endif
 
 
-typedef uLong (*check_func) OF((uLong check, const Bytef *buf, uInt len));
+typedef uLong (ZEXPORT *check_func) OF((uLong check, const Bytef *buf,
-
+				       uInt len));
 voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size));
 void   zcfree  OF((voidpf opaque, voidpf ptr));