zlib 1.1.3

ChangeLog

@@ -1,20 +1,315 @@
 
 		ChangeLog file for zlib
 
-Changes in 1.0 (15 Jan 96)
+Changes in 1.1.3 (9 July 1998)
+- fix "an inflate input buffer bug that shows up on rare but persistent
+  occasions" (Mark)
+- fix gzread and gztell for concatenated .gz files (Didier Le Botlan)
+- fix gzseek(..., SEEK_SET) in write mode
+- fix crc check after a gzeek (Frank Faubert)
+- fix miniunzip when the last entry in a zip file is itself a zip file
+  (J Lillge)
+- add contrib/asm586 and contrib/asm686 (Brian Raiter)
+  See http://www.muppetlabs.com/~breadbox/software/assembly.html
+- add support for Delphi 3 in contrib/delphi (Bob Dellaca)
+- add support for C++Builder 3 and Delphi 3 in contrib/delphi2 (Davide Moretti)
+- do not exit prematurely in untgz if 0 at start of block (Magnus Holmgren)
+- use macro EXTERN instead of extern to support DLL for BeOS (Sander Stoks)
+- added a FAQ file
+
+- Support gzdopen on Mac with Metrowerks (Jason Linhart)
+- Do not redefine Byte on Mac (Brad Pettit & Jason Linhart)
+- define SEEK_END too if SEEK_SET is not defined (Albert Chin-A-Young)
+- avoid some warnings with Borland C (Tom Tanner)
+- fix a problem in contrib/minizip/zip.c for 16-bit MSDOS (Gilles Vollant)
+- emulate utime() for WIN32 in contrib/untgz  (Gilles Vollant)
+- allow several arguments to configure (Tim Mooney, Frodo Looijaard)
+- use libdir and includedir in Makefile.in (Tim Mooney)
+- support shared libraries on OSF1 V4 (Tim Mooney)
+- remove so_locations in "make clean"  (Tim Mooney)
+- fix maketree.c compilation error (Glenn, Mark)
+- Python interface to zlib now in Python 1.5 (Jeremy Hylton)
+- new Makefile.riscos (Rich Walker)
+- initialize static descriptors in trees.c for embedded targets (Nick Smith)
+- use "foo-gz" in example.c for RISCOS and VMS (Nick Smith)
+- add the OS/2 files in Makefile.in too (Andrew Zabolotny)
+- fix fdopen and halloc macros for Microsoft C 6.0 (Tom Lane)
+- fix maketree.c to allow clean compilation of inffixed.h (Mark)
+- fix parameter check in deflateCopy (Gunther Nikl)
+- cleanup trees.c, use compressed_len only in debug mode (Christian Spieler)
+- Many portability patches by Christian Spieler:
+  . zutil.c, zutil.h: added "const" for zmem*
+  . Make_vms.com: fixed some typos
+  . Make_vms.com: msdos/Makefile.*: removed zutil.h from some dependency lists
+  . msdos/Makefile.msc: remove "default rtl link library" info from obj files
+  . msdos/Makefile.*: use model-dependent name for the built zlib library
+  . msdos/Makefile.emx, nt/Makefile.emx, nt/Makefile.gcc:
+     new makefiles, for emx (DOS/OS2), emx&rsxnt and mingw32 (Windows 9x / NT)
+- use define instead of typedef for Bytef also for MSC small/medium (Tom Lane)
+- replace __far with _far for better portability (Christian Spieler, Tom Lane)
+- fix test for errno.h in configure (Tim Newsham)
+
+Changes in 1.1.2 (19 March 98)
+- added contrib/minzip, mini zip and unzip based on zlib (Gilles Vollant)
+  See http://www.winimage.com/zLibDll/unzip.html
+- preinitialize the inflate tables for fixed codes, to make the code
+  completely thread safe (Mark)
+- some simplifications and slight speed-up to the inflate code (Mark)
+- fix gzeof on non-compressed files (Allan Schrum)
+- add -std1 option in configure for OSF1 to fix gzprintf (Martin Mokrejs)
+- use default value of 4K for Z_BUFSIZE for 16-bit MSDOS (Tim Wegner + Glenn)
+- added os2/Makefile.def and os2/zlib.def (Andrew Zabolotny)
+- add shared lib support for UNIX_SV4.2MP (MATSUURA Takanori)
+- do not wrap extern "C" around system includes (Tom Lane)
+- mention zlib binding for TCL in README (Andreas Kupries)
+- added amiga/Makefile.pup for Amiga powerUP SAS/C PPC (Andreas Kleinert)
+- allow "make install prefix=..." even after configure (Glenn Randers-Pehrson)
+- allow "configure --prefix $HOME" (Tim Mooney)
+- remove warnings in example.c and gzio.c (Glenn Randers-Pehrson)
+- move Makefile.sas to amiga/Makefile.sas
+
+Changes in 1.1.1 (27 Feb 98)
+- fix macros _tr_tally_* in deflate.h for debug mode  (Glenn Randers-Pehrson)
+- remove block truncation heuristic which had very marginal effect for zlib
+  (smaller lit_bufsize than in gzip 1.2.4) and degraded a little the
+  compression ratio on some files. This also allows inlining _tr_tally for
+  matches in deflate_slow.
+- added msdos/Makefile.w32 for WIN32 Microsoft Visual C++ (Bob Frazier)
+
+Changes in 1.1.0 (24 Feb 98)
+- do not return STREAM_END prematurely in inflate (John Bowler)
+- revert to the zlib 1.0.8 inflate to avoid the gcc 2.8.0 bug (Jeremy Buhler)
+- compile with -DFASTEST to get compression code optimized for speed only
+- in minigzip, try mmap'ing the input file first (Miguel Albrecht)
+- increase size of I/O buffers in minigzip.c and gzio.c (not a big gain
+  on Sun but significant on HP)
+
+- add a pointer to experimental unzip library in README (Gilles Vollant)
+- initialize variable gcc in configure (Chris Herborth)
+
+Changes in 1.0.9 (17 Feb 1998)
+- added gzputs and gzgets functions
+- do not clear eof flag in gzseek (Mark Diekhans)
+- fix gzseek for files in transparent mode (Mark Diekhans)
+- do not assume that vsprintf returns the number of bytes written (Jens Krinke)
+- replace EXPORT with ZEXPORT to avoid conflict with other programs
+- added compress2 in zconf.h, zlib.def, zlib.dnt
+- new asm code from Gilles Vollant in contrib/asm386
+- simplify the inflate code (Mark):
+ . Replace ZALLOC's in huft_build() with single ZALLOC in inflate_blocks_new()
+ . ZALLOC the length list in inflate_trees_fixed() instead of using stack
+ . ZALLOC the value area for huft_build() instead of using stack
+ . Simplify Z_FINISH check in inflate()
+
+- Avoid gcc 2.8.0 comparison bug a little differently than zlib 1.0.8
+- in inftrees.c, avoid cc -O bug on HP (Farshid Elahi)
+- in zconf.h move the ZLIB_DLL stuff earlier to avoid problems with
+  the declaration of FAR (Gilles VOllant)
+- install libz.so* with mode 755 (executable) instead of 644 (Marc Lehmann)
+- read_buf buf parameter of type Bytef* instead of charf*
+- zmemcpy parameters are of type Bytef*, not charf* (Joseph Strout)
+- do not redeclare unlink in minigzip.c for WIN32 (John Bowler)
+- fix check for presence of directories in "make install" (Ian Willis)
+
+Changes in 1.0.8 (27 Jan 1998)
+- fixed offsets in contrib/asm386/gvmat32.asm (Gilles Vollant)
+- fix gzgetc and gzputc for big endian systems (Markus Oberhumer)
+- added compress2() to allow setting the compression level
+- include sys/types.h to get off_t on some systems (Marc Lehmann & QingLong)
+- use constant arrays for the static trees in trees.c instead of computing
+  them at run time (thanks to Ken Raeburn for this suggestion). To create
+  trees.h, compile with GEN_TREES_H and run "make test".
+- check return code of example in "make test" and display result
+- pass minigzip command line options to file_compress
+- simplifying code of inflateSync to avoid gcc 2.8 bug
+
+- support CC="gcc -Wall" in configure -s (QingLong)
+- avoid a flush caused by ftell in gzopen for write mode (Ken Raeburn)
+- fix test for shared library support to avoid compiler warnings
+- zlib.lib -> zlib.dll in msdos/zlib.rc (Gilles Vollant)
+- check for TARGET_OS_MAC in addition to MACOS (Brad Pettit)
+- do not use fdopen for Metrowerks on Mac (Brad Pettit))
+- add checks for gzputc and gzputc in example.c
+- avoid warnings in gzio.c and deflate.c (Andreas Kleinert)
+- use const for the CRC table (Ken Raeburn)
+- fixed "make uninstall" for shared libraries
+- use Tracev instead of Trace in infblock.c
+- in example.c use correct compressed length for test_sync
+- suppress +vnocompatwarnings in configure for HPUX (not always supported)
+
+Changes in 1.0.7 (20 Jan 1998)
+- fix gzseek which was broken in write mode
+- return error for gzseek to negative absolute position
+- fix configure for Linux (Chun-Chung Chen)
+- increase stack space for MSC (Tim Wegner)
+- get_crc_table and inflateSyncPoint are EXPORTed (Gilles Vollant)
+- define EXPORTVA for gzprintf (Gilles Vollant)
+- added man page zlib.3 (Rick Rodgers)
+- for contrib/untgz, fix makedir() and improve Makefile
+
+- check gzseek in write mode in example.c
+- allocate extra buffer for seeks only if gzseek is actually called
+- avoid signed/unsigned comparisons (Tim Wegner, Gilles Vollant)
+- add inflateSyncPoint in zconf.h
+- fix list of exported functions in nt/zlib.dnt and mdsos/zlib.def
+
+Changes in 1.0.6 (19 Jan 1998)
+- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
+  gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
+- Fix a deflate bug occuring only with compression level 0 (thanks to
+  Andy Buckler for finding this one).
+- In minigzip, pass transparently also the first byte for .Z files.
+- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()
+- check Z_FINISH in inflate (thanks to Marc Schluper)
+- Implement deflateCopy (thanks to Adam Costello)
+- make static libraries by default in configure, add --shared option.
+- move MSDOS or Windows specific files to directory msdos
+- suppress the notion of partial flush to simplify the interface
+  (but the symbol Z_PARTIAL_FLUSH is kept for compatibility with 1.0.4)
+- suppress history buffer provided by application to simplify the interface
+  (this feature was not implemented anyway in 1.0.4)
+- next_in and avail_in must be initialized before calling inflateInit or
+  inflateInit2
+- add EXPORT in all exported functions (for Windows DLL)
+- added Makefile.nt (thanks to Stephen Williams)
+- added the unsupported "contrib" directory:
+   contrib/asm386/ by Gilles Vollant <info@winimage.com>
+	386 asm code replacing longest_match().
+   contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
+        A C++ I/O streams interface to the zlib gz* functions
+   contrib/iostream2/  by Tyge L<>vset <Tyge.Lovset@cmr.no>
+	Another C++ I/O streams interface
+   contrib/untgz/  by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+	A very simple tar.gz file extractor using zlib
+   contrib/visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
+        How to use compress(), uncompress() and the gz* functions from VB.
+- pass params -f (filtered data), -h (huffman only), -1 to -9 (compression
+  level) in minigzip (thanks to Tom Lane)
+
+- use const for rommable constants in deflate
+- added test for gzseek and gztell in example.c
+- add undocumented function inflateSyncPoint() (hack for Paul Mackerras)
+- add undocumented function zError to convert error code to string
+  (for Tim Smithers)
+- Allow compilation of gzio with -DNO_DEFLATE to avoid the compression code.
+- Use default memcpy for Symantec MSDOS compiler.
+- Add EXPORT keyword for check_func (needed for Windows DLL)
+- add current directory to LD_LIBRARY_PATH for "make test"
+- create also a link for libz.so.1
+- added support for FUJITSU UXP/DS (thanks to Toshiaki Nomura)
+- use $(SHAREDLIB) instead of libz.so in Makefile.in (for HPUX)
+- added -soname for Linux in configure (Chun-Chung Chen,
+- assign numbers to the exported functions in zlib.def (for Windows DLL)
+- add advice in zlib.h for best usage of deflateSetDictionary
+- work around compiler bug on Atari (cast Z_NULL in call of s->checkfn)
+- allow compilation with ANSI keywords only enabled for TurboC in large model
+- avoid "versionString"[0] (Borland bug)
+- add NEED_DUMMY_RETURN for Borland
+- use variable z_verbose for tracing in debug mode (L. Peter Deutsch).
+- allow compilation with CC
+- defined STDC for OS/2 (David Charlap)	
+- limit external names to 8 chars for MVS (Thomas Lund)
+- in minigzip.c, use static buffers only for 16-bit systems
+- fix suffix check for "minigzip -d foo.gz"
+- do not return an error for the 2nd of two consecutive gzflush() (Felix Lee)
+- use _fdopen instead of fdopen for MSC >= 6.0 (Thomas Fanslau)
+- added makelcc.bat for lcc-win32 (Tom St Denis)
+- in Makefile.dj2, use copy and del instead of install and rm (Frank Donahoe)
+- Avoid expanded $Id$. Use "rcs -kb" or "cvs admin -kb" to avoid Id expansion.
+- check for unistd.h in configure (for off_t)
+- remove useless check parameter in inflate_blocks_free
+- avoid useless assignment of s->check to itself in inflate_blocks_new
+- do not flush twice in gzclose (thanks to Ken Raeburn)
+- rename FOPEN as F_OPEN to avoid clash with /usr/include/sys/file.h
+- use NO_ERRNO_H instead of enumeration of operating systems with errno.h
+- work around buggy fclose on pipes for HP/UX
+- support zlib DLL with BORLAND C++ 5.0 (thanks to Glenn Randers-Pehrson)
+- fix configure if CC is already equal to gcc
+
+Changes in 1.0.5 (3 Jan 98)
+- Fix inflate to terminate gracefully when fed corrupted or invalid data
+- Use const for rommable constants in inflate
+- Eliminate memory leaks on error conditions in inflate
+- Removed some vestigial code in inflate
+- Update web address in README
+  
+Changes in 1.0.4 (24 Jul 96)
+- In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF
+  bit, so the decompressor could decompress all the correct data but went
+  on to attempt decompressing extra garbage data. This affected minigzip too.
+- zlibVersion and gzerror return const char* (needed for DLL)
+- port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno)
+- use z_error only for DEBUG (avoid problem with DLLs)
+
+Changes in 1.0.3 (2 Jul 96)
+- use z_streamp instead of z_stream *, which is now a far pointer in MSDOS
+  small and medium models; this makes the library incompatible with previous
+  versions for these models. (No effect in large model or on other systems.)
+- return OK instead of BUF_ERROR if previous deflate call returned with
+  avail_out as zero but there is nothing to do
+- added memcmp for non STDC compilers
+- define NO_DUMMY_DECL for more Mac compilers (.h files merged incorrectly)
+- define __32BIT__ if __386__ or i386 is defined (pb. with Watcom and SCO)
+- better check for 16-bit mode MSC (avoids problem with Symantec)
+
+Changes in 1.0.2 (23 May 96)
+- added Windows DLL support
+- added a function zlibVersion (for the DLL support)
+- fixed declarations using Bytef in infutil.c (pb with MSDOS medium model)
+- Bytef is define's instead of typedef'd only for Borland C
+- avoid reading uninitialized memory in example.c
+- mention in README that the zlib format is now RFC1950
+- updated Makefile.dj2
+- added algorithm.doc
+
+Changes in 1.0.1 (20 May 96) [1.0 skipped to avoid confusion]
+- fix array overlay in deflate.c which sometimes caused bad compressed data
+- fix inflate bug with empty stored block
+- fix MSDOS medium model which was broken in 0.99
+- fix deflateParams() which could generated bad compressed data.
+- Bytef is define'd instead of typedef'ed (work around Borland bug)
+- added an INDEX file
+- new makefiles for DJGPP (Makefile.dj2), 32-bit Borland (Makefile.b32),
+  Watcom (Makefile.wat), Amiga SAS/C (Makefile.sas)
+- speed up adler32 for modern machines without auto-increment
+- added -ansi for IRIX in configure
+- static_init_done in trees.c is an int
+- define unlink as delete for VMS
+- fix configure for QNX
+- add configure branch for SCO and HPUX
+- avoid many warnings (unused variables, dead assignments, etc...)
+- no fdopen for BeOS
+- fix the Watcom fix for 32 bit mode (define FAR as empty)
+- removed redefinition of Byte for MKWERKS
+- work around an MWKERKS bug (incorrect merge of all .h files)
+
+Changes in 0.99 (27 Jan 96)
+- allow preset dictionary shared between compressor and decompressor
+- allow compression level 0 (no compression)
+- add deflateParams in zlib.h: allow dynamic change of compression level
+  and compression strategy.
+- test large buffers and deflateParams in example.c
+- add optional "configure" to build zlib as a shared library
+- suppress Makefile.qnx, use configure instead
 - fixed deflate for 64-bit systems (detected on Cray)
 - fixed inflate_blocks for 64-bit systems (detected on Alpha)
+- declare Z_DEFLATED in zlib.h (possible parameter for deflateInit2)
+- always return Z_BUF_ERROR when deflate() has nothing to do
+- deflateInit and inflateInit are now macros to allow version checking
+- prefix all global functions and types with z_ with -DZ_PREFIX
 - make falloc completely reentrant (inftrees.c)
 - fixed very unlikely race condition in ct_static_init
-- always return Z_BUF_ERROR when deflate() has nothing to do
-- add deflateParams in zlib.h.
-- test large buffers and deflateParams in example.c
-- declare Z_DEFLATED in zlib.h (possible parameter for deflateInit2)
-- Document Z_SYNC_FLUSH
-- added deflateGetAdler32 and deflateSetAdler32
 - free in reverse order of allocation to help memory manager
+- use zlib-1.0/* instead of zlib/* inside the tar.gz
+- make zlib warning-free with "gcc -O3 -Wall -Wwrite-strings -Wpointer-arith
+  -Wconversion -Wstrict-prototypes -Wmissing-prototypes"
+- allow gzread on concatenated .gz files
+- deflateEnd now returns Z_DATA_ERROR if it was premature
+- deflate is finally (?) fully deterministic (no matches beyond end of input)
+- Document Z_SYNC_FLUSH
+- add uninstall in Makefile
 - Check for __cpluplus in zlib.h
-- Finer test in ct_align for partial flush
+- Better test in ct_align for partial flush
 - avoid harmless warnings for Borland C++
 - initialize hash_head in deflate.c
 - avoid warning on fdopen (gzio.c) for HP cc -Aa
@@ -23,7 +318,7 @@ Changes in 1.0 (15 Jan 96)
 - ignore error if ranlib doesn't exist
 - call ranlib twice for NeXTSTEP
 - use exec_prefix instead of prefix for libz.a
-- renamed ct_* as tr_* to avoid conflict with another application.
+- renamed ct_* as _tr_* to avoid conflict with applications
 - clear z->msg in inflateInit2 before any error return
 - initialize opaque in example.c, gzio.c, deflate.c and inflate.c
 - fixed typo in zconf.h (_GNUC__ => __GNUC__)
@@ -32,6 +327,22 @@ Changes in 1.0 (15 Jan 96)
 - in fcalloc, normalize pointer if size > 65520 bytes
 - don't use special fcalloc for 32 bit Borland C++
 - use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc...
+- use Z_BINARY instead of BINARY
+- document that gzclose after gzdopen will close the file
+- allow "a" as mode in gzopen.
+- fix error checking in gzread
+- allow skipping .gz extra-field on pipes
+- added reference to Perl interface in README
+- put the crc table in FAR data (I dislike more and more the medium model :)
+- added get_crc_table
+- added a dimension to all arrays (Borland C can't count).
+- workaround Borland C bug in declaration of inflate_codes_new & inflate_fast
+- guard against multiple inclusion of *.h (for precompiled header on Mac)
+- Watcom C pretends to be Microsoft C small model even in 32 bit mode.
+- don't use unsized arrays to avoid silly warnings by Visual C++:
+     warning C4746: 'inflate_mask' : unsized array treated as  '__far'
+     (what's wrong with far data in far model?).
+- define enum out of inflate_blocks_state to allow compilation with C++
 
 Changes in 0.95 (16 Aug 95)
 - fix MSDOS small and medium model (now easier to adapt to any compiler)

FAQ

@@ -0,0 +1,72 @@
+
+		Frequently Asked Questions about zlib
+
+
+If your question is not there, please check the zlib home page 
+http://www.cdrom.com/pub/infozip/zlib/ which may have more recent information.
+
+
+1) I need a Windows DLL
+2) I need a Visual Basic interface to zlib
+3) compress() returns Z_BUF_ERROR
+4) deflate or inflate returns Z_BUF_ERROR
+5) Where is the zlib documentation (man pages, etc...)?
+6) Why don't you use GNU autoconf, libtool, etc...?
+7) There is a bug in zlib.
+8) I get "undefined reference to gzputc"
+
+
+
+1) I need a Windows DLL
+
+  The zlib sources can be compiled without change to produce a DLL.
+  If you want a precompiled DLL, see http://www.winimage.com/zLibDll
+
+
+2) I need a Visual Basic interface to zlib
+
+  See http://www.tcfb.com/dowseware/cmp-z-it.zip
+      http://web2.airmail.net/markn/articles/zlibtool/zlibtool.htm
+  and contrib/visual-basic.txt
+
+3) compress() returns Z_BUF_ERROR
+
+  Make sure that before the call of compress, the length of the
+  compressed buffer is equal to the total size of the compressed buffer
+  and not zero.  For Visual Basic, check that this parameter is passed
+  by reference ("as any"), not by value ("as long").
+
+
+4) deflate or inflate returns Z_BUF_ERROR
+
+  Make sure that before the call avail_in and avail_out are not zero.
+
+
+5) Where is the zlib documentation (man pages, etc...)?
+
+  It's in zlib.h for the moment. Volunteers to transform this
+  to man pages, please contact jloup@gzip.org. Examples of zlib usage
+  are in the files example.c and minigzip.c.
+
+
+6) Why don't you use GNU autoconf, libtool, etc...?
+
+  Because we would like to keep zlib as a very small and simple package.
+  zlib is rather portable and doesn't need much configuration.
+
+
+7) There is a bug in zlib.
+
+  Most of the time, such problems are due to an incorrect usage
+  of zlib. Please try to reproduce the problem with a small
+  program and send us the corresponding source at zlib@quest.jpl.nasa.gov
+  Do not send multi-megabyte data files without prior agreement.
+
+
+8) I get "undefined reference to gzputc"
+
+  If "make test" produces something like
+     example.o(.text+0x174): 
+  check that you don't have old files libz.* in /usr/lib, /usr/local/lib
+  or /usr/X11R6/lib. Remove old versions then do "make install".
+

INDEX

@@ -0,0 +1,86 @@
+ChangeLog		history of changes
+INDEX			this file
+FAQ			Frequently Asked Questions about zlib
+Make_vms.com		script for Vax/VMS
+Makefile		makefile for Unix (generated by configure)
+Makefile.in		makefile for Unix (template for configure)
+Makefile.riscos 	makefile for RISCOS
+README			guess what
+algorithm.txt		description of the (de)compression algorithm
+configure		configure script for Unix
+descrip.mms		makefile for Vax/VMS
+zlib.3			mini man page for zlib (volunteers to write full
+			man pages from zlib.h welcome. write to jloup@gzip.org)
+
+amiga/Makefile.sas	makefile for Amiga SAS/C
+amiga/Makefile.pup      makefile for Amiga powerUP SAS/C PPC
+
+msdos/Makefile.w32      makefile for Microsoft Visual C++ 32-bit
+msdos/Makefile.b32	makefile for Borland C++   32-bit
+msdos/Makefile.bor	makefile for Borland C/C++ 16-bit
+msdos/Makefile.dj2	makefile for DJGPP 2.x
+msdos/Makefile.emx	makefile for EMX 0.9c (32-bit DOS/OS2)
+msdos/Makefile.msc	makefile for Microsoft C 16-bit
+msdos/Makefile.tc	makefile for Turbo C
+msdos/Makefile.wat	makefile for Watcom C
+msdos/zlib.def        	definition file for Windows DLL
+msdos/zlib.rc         	definition file for Windows DLL
+
+nt/Makefile.nt		makefile for Windows NT
+nt/zlib.dnt		definition file for Windows NT DLL
+nt/Makefile.emx		makefile for EMX 0.9c/RSXNT 1.41 (Win32 Intel)
+nt/Makefile.gcc		makefile for Windows NT using GCC (mingw32)
+
+
+		zlib public header files (must be kept):
+zconf.h
+zlib.h
+
+		private source files used to build the zlib library:
+adler32.c
+compress.c
+crc32.c
+deflate.c
+deflate.h
+gzio.c
+infblock.c
+infblock.h
+infcodes.c
+infcodes.h
+inffast.c
+inffast.h
+inflate.c
+inftrees.c
+inftrees.h
+infutil.c
+infutil.h
+maketree.c
+trees.c
+uncompr.c
+zutil.c
+zutil.h
+
+		source files for sample programs:
+example.c
+minigzip.c
+
+		unsupported contribution by third parties
+
+contrib/asm386/ by Gilles Vollant <info@winimage.com>
+	386 asm code replacing longest_match().
+
+contrib/minizip/ by Gilles Vollant <info@winimage.com>
+	Mini zip and unzip based on zlib
+        See http://www.winimage.com/zLibDll/unzip.html
+
+contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
+        A C++ I/O streams interface to the zlib gz* functions
+
+contrib/iostream2/  by Tyge L<>vset <Tyge.Lovset@cmr.no>
+	Another C++ I/O streams interface
+
+contrib/untgz/  by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+	A very simple tar.gz extractor using zlib
+
+contrib/visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
+        How to use compress(), uncompress() and the gz* functions from VB.

Make_vms.com

@@ -28,15 +28,15 @@ $ if f$search("SYS$SYSTEM:MMS.EXE").eqs.""
 $  then
 $   dele example.obj;*,minigzip.obj;*
 $   CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" -
-                adler32.c zutil.h zlib.h zconf.h
+                adler32.c zlib.h zconf.h
 $   CALL MAKE compress.OBJ "CC ''CCOPT' compress" -
                 compress.c zlib.h zconf.h
 $   CALL MAKE crc32.OBJ "CC ''CCOPT' crc32" -
-                crc32.c zutil.h zlib.h zconf.h
+                crc32.c zlib.h zconf.h
 $   CALL MAKE deflate.OBJ "CC ''CCOPT' deflate" -
-                deflatec.c deflate.h zutil.h zlib.h zconf.h
+                deflate.c deflate.h zutil.h zlib.h zconf.h
 $   CALL MAKE gzio.OBJ "CC ''CCOPT' gzio" -
-                gsio.c zutil.h zlib.h zconf.h
+                gzio.c zutil.h zlib.h zconf.h
 $   CALL MAKE infblock.OBJ "CC ''CCOPT' infblock" -
                 infblock.c zutil.h zlib.h zconf.h infblock.h
 $   CALL MAKE infcodes.OBJ "CC ''CCOPT' infcodes" -

Makefile

@@ -1,79 +1,174 @@
 # Makefile for zlib
-# Copyright (C) 1995-1996 Jean-loup Gailly.
+# Copyright (C) 1995-1998 Jean-loup Gailly.
 # For conditions of distribution and use, see copyright notice in zlib.h 
 
+# To compile and test, type:
+#   ./configure; make test
+# The call of configure is optional if you don't have special requirements
+# If you wish to build zlib as a shared library, use: ./configure -s
+
+# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
+#    make install
+# To install in $HOME instead of /usr/local, use:
+#    make install prefix=$HOME
+
 CC=cc
+
 CFLAGS=-O
-#use -O3 for gcc
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
-#CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
 #CFLAGS=-g -DDEBUG
+#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+#           -Wstrict-prototypes -Wmissing-prototypes
+
 LDFLAGS=-L. -lz
+LDSHARED=$(CC)
+CPP=$(CC) -E
 
+VER=1.1.3
+LIBS=libz.a
+SHAREDLIB=libz.so
+
+AR=ar rc
 RANLIB=ranlib
+TAR=tar
+SHELL=/bin/sh
 
-prefix=/usr/local
+prefix = /usr/local
 exec_prefix = ${prefix}
+libdir = ${exec_prefix}/lib
+includedir = ${prefix}/include
 
 OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
        zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
 
+OBJA =
+# to use the asm code: make OBJA=match.o
+
 TEST_OBJS = example.o minigzip.o
 
+DISTFILES = README FAQ INDEX ChangeLog configure Make*[a-z0-9] *.[ch] *.mms \
+  algorithm.txt zlib.3 msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \
+  nt/Make*[a-z0-9] nt/zlib.dnt amiga/Make*.??? os2/M*.os2 os2/zlib.def \
+  contrib/RE*.contrib contrib/*.txt contrib/asm386/*.asm contrib/asm386/*.c \
+  contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/asm[56]86/*.?86 \
+  contrib/asm[56]86/*.S contrib/iostream/*.cpp \
+  contrib/iostream/*.h  contrib/iostream2/*.h contrib/iostream2/*.cpp \
+  contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32 \
+  contrib/minizip/[CM]*[pe] contrib/minizip/*.[ch] contrib/minizip/*.[td]?? \
+  contrib/delphi*/*.???
+
 all: example minigzip
 
 test: all
-	./example
+	@LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
-	echo hello world | ./minigzip | ./minigzip -d 
+	echo hello world | ./minigzip | ./minigzip -d || \
+	  echo '		*** minigzip test FAILED ***' ; \
+	if ./example; then \
+	  echo '		*** zlib test OK ***'; \
+	else \
+	  echo '		*** zlib test FAILED ***'; \
+	fi
 
-install: libz.a
+libz.a: $(OBJS) $(OBJA)
-	-@mkdir $(prefix)/include
+	$(AR) $@ $(OBJS) $(OBJA)
-	-@mkdir $(exec_prefix)/lib
+	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
-	cp zlib.h zconf.h $(prefix)/include
-	chmod 644 $(prefix)/include/zlib.h $(prefix)/include/zconf.h
-	cp libz.a $(exec_prefix)/lib
-	chmod 644 $(exec_prefix)/lib/libz.a
-	-@$(RANLIB) $(prefix)/lib/libz.a
-# This second ranlib is needed on NeXTSTEP which checks file times
 
-libz.a: $(OBJS)
+match.o: match.S
-	ar rc $@ $(OBJS)
+	$(CPP) match.S > _match.s
-	-@$(RANLIB) $@
+	$(CC) -c _match.s
+	mv _match.o match.o
+	rm -f _match.s
 
-example: example.o libz.a
+$(SHAREDLIB).$(VER): $(OBJS)
+	$(LDSHARED) -o $@ $(OBJS)
+	rm -f $(SHAREDLIB) $(SHAREDLIB).1
+	ln -s $@ $(SHAREDLIB)
+	ln -s $@ $(SHAREDLIB).1
+
+example: example.o $(LIBS)
 	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
 
-minigzip: minigzip.o libz.a
+minigzip: minigzip.o $(LIBS)
 	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
 
+install: $(LIBS)
+	-@if [ ! -d $(includedir)  ]; then mkdir $(includedir); fi
+	-@if [ ! -d $(libdir) ]; then mkdir $(libdir); fi
+	cp zlib.h zconf.h $(includedir)
+	chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h
+	cp $(LIBS) $(libdir)
+	cd $(libdir); chmod 755 $(LIBS)
+	-@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
+	cd $(libdir); if test -f $(SHAREDLIB).$(VER); then \
+	  rm -f $(SHAREDLIB) $(SHAREDLIB).1; \
+	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB); \
+	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB).1; \
+	  (ldconfig || true)  >/dev/null 2>&1; \
+	fi
+# The ranlib in install is needed on NeXTSTEP which checks file times
+# ldconfig is for Linux
+
+uninstall:
+	cd $(includedir); \
+	v=$(VER); \
+	if test -f zlib.h; then \
+	  v=`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`; \
+          rm -f zlib.h zconf.h; \
+	fi; \
+	cd $(libdir); rm -f libz.a; \
+	if test -f $(SHAREDLIB).$$v; then \
+	  rm -f $(SHAREDLIB).$$v $(SHAREDLIB) $(SHAREDLIB).1; \
+	fi
+
 clean:
-	rm -f *.o example minigzip libz.a foo.gz
+	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz so_locations \
+	   _match.s maketree
+
+distclean:	clean
 
 zip:
-	zip -ul9 zlib README ChangeLog Makefile Make????.??? Makefile.?? \
+	mv Makefile Makefile~; cp -p Makefile.in Makefile
-	  descrip.mms *.[ch]
+	rm -f test.c ztest*.c contrib/minizip/test.zip
+	v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
+	zip -ul9 zlib$$v $(DISTFILES)
+	mv Makefile~ Makefile
 
-tgz:
+dist:
-	cd ..; tar cfz zlib/zlib.tgz zlib/README zlib/ChangeLog zlib/Makefile \
+	mv Makefile Makefile~; cp -p Makefile.in Makefile
-	  zlib/Make????.??? zlib/Makefile.?? zlib/descrip.mms zlib/*.[ch]
+	rm -f test.c ztest*.c contrib/minizip/test.zip
+	d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
+	rm -f $$d.tar.gz; \
+	if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \
+	files=""; \
+	for f in $(DISTFILES); do files="$$files $$d/$$f"; done; \
+	cd ..; \
+	GZIP=-9 $(TAR) chofz $$d/$$d.tar.gz $$files; \
+	if test ! -d $$d; then rm -f $$d; fi
+	mv Makefile~ Makefile
 
-TAGS:
+tags:	
 	etags *.[ch]
 
+depend:
+	makedepend -- $(CFLAGS) -- *.[ch]
+
 # DO NOT DELETE THIS LINE -- make depend depends on it.
 
-adler32.o: zutil.h zlib.h zconf.h
+adler32.o: zlib.h zconf.h
 compress.o: zlib.h zconf.h
-crc32.o: zutil.h zlib.h zconf.h
+crc32.o: zlib.h zconf.h
 deflate.o: deflate.h zutil.h zlib.h zconf.h
 example.o: zlib.h zconf.h
 gzio.o: zutil.h zlib.h zconf.h
-infblock.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
+infblock.o: infblock.h inftrees.h infcodes.h infutil.h zutil.h zlib.h zconf.h
-infcodes.o: zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h inffast.h
+infcodes.o: zutil.h zlib.h zconf.h
-inffast.o: zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+infcodes.o: inftrees.h infblock.h infcodes.h infutil.h inffast.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h
+inffast.o: infblock.h infcodes.h infutil.h inffast.h
 inflate.o: zutil.h zlib.h zconf.h infblock.h
 inftrees.o: zutil.h zlib.h zconf.h inftrees.h
-infutil.o: zutil.h zlib.h zconf.h inftrees.h infutil.h
+infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
-minigzip.o: zlib.h zconf.h
+minigzip.o:  zlib.h zconf.h 
-trees.o: deflate.h zutil.h zlib.h zconf.h
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
 uncompr.o: zlib.h zconf.h
 zutil.o: zutil.h zlib.h zconf.h  

Makefile.in

@@ -0,0 +1,174 @@
+# Makefile for zlib
+# Copyright (C) 1995-1998 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h 
+
+# To compile and test, type:
+#   ./configure; make test
+# The call of configure is optional if you don't have special requirements
+# If you wish to build zlib as a shared library, use: ./configure -s
+
+# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
+#    make install
+# To install in $HOME instead of /usr/local, use:
+#    make install prefix=$HOME
+
+CC=cc
+
+CFLAGS=-O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-g -DDEBUG
+#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+#           -Wstrict-prototypes -Wmissing-prototypes
+
+LDFLAGS=-L. -lz
+LDSHARED=$(CC)
+CPP=$(CC) -E
+
+VER=1.1.3
+LIBS=libz.a
+SHAREDLIB=libz.so
+
+AR=ar rc
+RANLIB=ranlib
+TAR=tar
+SHELL=/bin/sh
+
+prefix = /usr/local
+exec_prefix = ${prefix}
+libdir = ${exec_prefix}/lib
+includedir = ${prefix}/include
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+OBJA =
+# to use the asm code: make OBJA=match.o
+
+TEST_OBJS = example.o minigzip.o
+
+DISTFILES = README FAQ INDEX ChangeLog configure Make*[a-z0-9] *.[ch] *.mms \
+  algorithm.txt zlib.3 msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \
+  nt/Make*[a-z0-9] nt/zlib.dnt amiga/Make*.??? os2/M*.os2 os2/zlib.def \
+  contrib/RE*.contrib contrib/*.txt contrib/asm386/*.asm contrib/asm386/*.c \
+  contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/asm[56]86/*.?86 \
+  contrib/asm[56]86/*.S contrib/iostream/*.cpp \
+  contrib/iostream/*.h  contrib/iostream2/*.h contrib/iostream2/*.cpp \
+  contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32 \
+  contrib/minizip/[CM]*[pe] contrib/minizip/*.[ch] contrib/minizip/*.[td]?? \
+  contrib/delphi*/*.???
+
+all: example minigzip
+
+test: all
+	@LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
+	echo hello world | ./minigzip | ./minigzip -d || \
+	  echo '		*** minigzip test FAILED ***' ; \
+	if ./example; then \
+	  echo '		*** zlib test OK ***'; \
+	else \
+	  echo '		*** zlib test FAILED ***'; \
+	fi
+
+libz.a: $(OBJS) $(OBJA)
+	$(AR) $@ $(OBJS) $(OBJA)
+	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
+
+match.o: match.S
+	$(CPP) match.S > _match.s
+	$(CC) -c _match.s
+	mv _match.o match.o
+	rm -f _match.s
+
+$(SHAREDLIB).$(VER): $(OBJS)
+	$(LDSHARED) -o $@ $(OBJS)
+	rm -f $(SHAREDLIB) $(SHAREDLIB).1
+	ln -s $@ $(SHAREDLIB)
+	ln -s $@ $(SHAREDLIB).1
+
+example: example.o $(LIBS)
+	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
+
+minigzip: minigzip.o $(LIBS)
+	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
+
+install: $(LIBS)
+	-@if [ ! -d $(includedir)  ]; then mkdir $(includedir); fi
+	-@if [ ! -d $(libdir) ]; then mkdir $(libdir); fi
+	cp zlib.h zconf.h $(includedir)
+	chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h
+	cp $(LIBS) $(libdir)
+	cd $(libdir); chmod 755 $(LIBS)
+	-@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
+	cd $(libdir); if test -f $(SHAREDLIB).$(VER); then \
+	  rm -f $(SHAREDLIB) $(SHAREDLIB).1; \
+	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB); \
+	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB).1; \
+	  (ldconfig || true)  >/dev/null 2>&1; \
+	fi
+# The ranlib in install is needed on NeXTSTEP which checks file times
+# ldconfig is for Linux
+
+uninstall:
+	cd $(includedir); \
+	v=$(VER); \
+	if test -f zlib.h; then \
+	  v=`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`; \
+          rm -f zlib.h zconf.h; \
+	fi; \
+	cd $(libdir); rm -f libz.a; \
+	if test -f $(SHAREDLIB).$$v; then \
+	  rm -f $(SHAREDLIB).$$v $(SHAREDLIB) $(SHAREDLIB).1; \
+	fi
+
+clean:
+	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz so_locations \
+	   _match.s maketree
+
+distclean:	clean
+
+zip:
+	mv Makefile Makefile~; cp -p Makefile.in Makefile
+	rm -f test.c ztest*.c contrib/minizip/test.zip
+	v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
+	zip -ul9 zlib$$v $(DISTFILES)
+	mv Makefile~ Makefile
+
+dist:
+	mv Makefile Makefile~; cp -p Makefile.in Makefile
+	rm -f test.c ztest*.c contrib/minizip/test.zip
+	d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
+	rm -f $$d.tar.gz; \
+	if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \
+	files=""; \
+	for f in $(DISTFILES); do files="$$files $$d/$$f"; done; \
+	cd ..; \
+	GZIP=-9 $(TAR) chofz $$d/$$d.tar.gz $$files; \
+	if test ! -d $$d; then rm -f $$d; fi
+	mv Makefile~ Makefile
+
+tags:	
+	etags *.[ch]
+
+depend:
+	makedepend -- $(CFLAGS) -- *.[ch]
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzio.o: zutil.h zlib.h zconf.h
+infblock.o: infblock.h inftrees.h infcodes.h infutil.h zutil.h zlib.h zconf.h
+infcodes.o: zutil.h zlib.h zconf.h
+infcodes.o: inftrees.h infblock.h infcodes.h infutil.h inffast.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h
+inffast.o: infblock.h infcodes.h infutil.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h infblock.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
+minigzip.o:  zlib.h zconf.h 
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h  

Makefile.qnx

@@ -1,75 +0,0 @@
-# Makefile for zlib
-# Copyright (C) 1995 Jean-loup Gailly.
-# For conditions of distribution and use, see copyright notice in zlib.h 
-
-# Modified slightly for QNX by Chris Herborth (chrish@qnx.com)
-
-CC=cc
-CFLAGS=-4 -O -Q
-#use -O3 for gcc to take advantage of inlining
-#CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
-#CFLAGS=-g -DDEBUG
-LDFLAGS=-L. -lz
-
-#RANLIB=ranlib
-
-prefix=/usr/local
-
-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
-       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
-
-TEST_OBJS = example.o minigzip.o
-
-all: example minigzip
-
-test: all
-	./example
-	echo hello world | ./minigzip | ./minigzip -d 
-
-install: zlib.lib
-	-@mkdir $(prefix)/include
-	-@mkdir $(prefix)/lib
-	cp zlib.h zconf.h $(prefix)/include
-	chmod 644 $(prefix)/include/zlib.h $(prefix)/include/zconf.h
-	cp zlib.lib $(prefix)/lib
-	chmod 644 $(prefix)/lib/zlib.lib
-
-zlib.lib: $(OBJS)
-	cc -A $@ $(OBJS)
-#	ar rc $@ $(OBJS)
-#	$(RANLIB) $@
-
-example: example.o zlib.lib
-	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
-
-minigzip: minigzip.o zlib.lib
-	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
-
-clean:
-	rm -f *.o example minigzip zlib.lib foo.gz
-
-zip:
-	zip -ul9 zlib README ChangeLog Makefile Makefile.??? Makefile.?? *.[ch]
-
-tgz:
-	cd ..; tar cfz zlib/zlib.tgz zlib/README zlib/ChangeLog zlib/Makefile \
-		zlib/Makefile.??? zlib/Makefile.?? zlib/*.[ch]
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-adler32.o: zutil.h zlib.h zconf.h
-compress.o: zlib.h zconf.h
-crc32.o: zutil.h zlib.h zconf.h
-deflate.o: deflate.h zutil.h zlib.h zconf.h
-example.o: zlib.h zconf.h
-gzio.o: zutil.h zlib.h zconf.h
-infblock.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
-infcodes.o: zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h inffast.h
-inffast.o: zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
-inflate.o: zutil.h zlib.h zconf.h infblock.h
-inftrees.o: zutil.h zlib.h zconf.h inftrees.h
-infutil.o: zutil.h zlib.h zconf.h inftrees.h infutil.h
-minigzip.o: zlib.h zconf.h
-trees.o: deflate.h zutil.h zlib.h zconf.h
-uncompr.o: zlib.h zconf.h
-zutil.o: zutil.h zlib.h zconf.h

Makefile.riscos

@@ -0,0 +1,151 @@
+# Project:   zlib_1_03
+# Patched for zlib 1.1.2 rw@shadow.org.uk 19980430
+# test works out-of-the-box, installs `somewhere' on demand
+
+# Toolflags:
+CCflags = -c -depend !Depend -IC: -g -throwback  -DRISCOS  -fah 
+C++flags = -c -depend !Depend -IC: -throwback
+Linkflags = -aif -c++ -o $@ 
+ObjAsmflags = -throwback -NoCache -depend !Depend
+CMHGflags = 
+LibFileflags = -c -l -o $@ 
+Squeezeflags = -o $@
+
+# change the line below to where _you_ want the library installed.
+libdest = lib:zlib
+
+# Final targets:
+@.lib:   @.o.adler32 @.o.compress @.o.crc32 @.o.deflate @.o.gzio \
+        @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil @.o.trees \
+        @.o.uncompr @.o.zutil 
+        LibFile $(LibFileflags) @.o.adler32 @.o.compress @.o.crc32 @.o.deflate \
+        @.o.gzio @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil \
+        @.o.trees @.o.uncompr @.o.zutil 
+test:   @.minigzip @.example @.lib
+	@copy @.lib @.libc  A~C~DF~L~N~P~Q~RS~TV
+	@echo running tests: hang on.
+	@/@.minigzip -f -9 libc
+	@/@.minigzip -d libc-gz
+	@/@.minigzip -f -1 libc
+	@/@.minigzip -d libc-gz
+	@/@.minigzip -h -9 libc
+	@/@.minigzip -d libc-gz
+	@/@.minigzip -h -1 libc
+	@/@.minigzip -d libc-gz
+	@/@.minigzip -9 libc
+	@/@.minigzip -d libc-gz
+	@/@.minigzip -1 libc
+	@/@.minigzip -d libc-gz
+	@diff @.lib @.libc
+	@echo that should have reported '@.lib and @.libc identical' if you have diff.
+	@/@.example @.fred @.fred
+	@echo that will have given lots of hello!'s.
+
+@.minigzip:   @.o.minigzip @.lib C:o.Stubs 
+        Link $(Linkflags) @.o.minigzip @.lib C:o.Stubs 
+@.example:   @.o.example @.lib C:o.Stubs 
+        Link $(Linkflags) @.o.example @.lib C:o.Stubs
+
+install: @.lib
+	cdir $(libdest)
+	cdir $(libdest).h
+	@copy @.h.zlib $(libdest).h.zlib A~C~DF~L~N~P~Q~RS~TV
+	@copy @.h.zconf $(libdest).h.zconf A~C~DF~L~N~P~Q~RS~TV
+	@copy @.lib $(libdest).lib  A~C~DF~L~N~P~Q~RS~TV
+	@echo okay, installed zlib in $(libdest)
+
+clean:; remove @.minigzip
+	remove @.example
+	remove @.libc
+	-wipe @.o.* F~r~cV
+	remove @.fred
+
+# User-editable dependencies:
+.c.o:
+        cc $(ccflags) -o $@ $<
+
+# Static dependencies:
+
+# Dynamic dependencies:
+o.example:	c.example
+o.example:	h.zlib
+o.example:	h.zconf
+o.minigzip:	c.minigzip
+o.minigzip:	h.zlib
+o.minigzip:	h.zconf
+o.adler32:	c.adler32
+o.adler32:	h.zlib
+o.adler32:	h.zconf
+o.compress:	c.compress
+o.compress:	h.zlib
+o.compress:	h.zconf
+o.crc32:	c.crc32
+o.crc32:	h.zlib
+o.crc32:	h.zconf
+o.deflate:	c.deflate
+o.deflate:	h.deflate
+o.deflate:	h.zutil
+o.deflate:	h.zlib
+o.deflate:	h.zconf
+o.gzio:	c.gzio
+o.gzio:	h.zutil
+o.gzio:	h.zlib
+o.gzio:	h.zconf
+o.infblock:	c.infblock
+o.infblock:	h.zutil
+o.infblock:	h.zlib
+o.infblock:	h.zconf
+o.infblock:	h.infblock
+o.infblock:	h.inftrees
+o.infblock:	h.infcodes
+o.infblock:	h.infutil
+o.infcodes:	c.infcodes
+o.infcodes:	h.zutil
+o.infcodes:	h.zlib
+o.infcodes:	h.zconf
+o.infcodes:	h.inftrees
+o.infcodes:	h.infblock
+o.infcodes:	h.infcodes
+o.infcodes:	h.infutil
+o.infcodes:	h.inffast
+o.inffast:	c.inffast
+o.inffast:	h.zutil
+o.inffast:	h.zlib
+o.inffast:	h.zconf
+o.inffast:	h.inftrees
+o.inffast:	h.infblock
+o.inffast:	h.infcodes
+o.inffast:	h.infutil
+o.inffast:	h.inffast
+o.inflate:	c.inflate
+o.inflate:	h.zutil
+o.inflate:	h.zlib
+o.inflate:	h.zconf
+o.inflate:	h.infblock
+o.inftrees:	c.inftrees
+o.inftrees:	h.zutil
+o.inftrees:	h.zlib
+o.inftrees:	h.zconf
+o.inftrees:	h.inftrees
+o.inftrees:	h.inffixed
+o.infutil:	c.infutil
+o.infutil:	h.zutil
+o.infutil:	h.zlib
+o.infutil:	h.zconf
+o.infutil:	h.infblock
+o.infutil:	h.inftrees
+o.infutil:	h.infcodes
+o.infutil:	h.infutil
+o.trees:	c.trees
+o.trees:	h.deflate
+o.trees:	h.zutil
+o.trees:	h.zlib
+o.trees:	h.zconf
+o.trees:	h.trees
+o.uncompr:	c.uncompr
+o.uncompr:	h.zlib
+o.uncompr:	h.zconf
+o.zutil:	c.zutil
+o.zutil:	h.zutil
+o.zutil:	h.zlib
+o.zutil:	h.zconf

README

@@ -1,59 +1,123 @@
-zlib 1.0 is a general purpose data compression library.
+zlib 1.1.3 is a general purpose data compression library.  All the code
-All the code is reentrant (thread safe).
+is thread safe.  The data format used by the zlib library
+is described by RFCs (Request for Comments) 1950 to 1952 in the files 
+ftp://ds.internic.net/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate
+format) and rfc1952.txt (gzip format). These documents are also available in
+other formats from ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
 
-The data format used by the zlib library is described in the
+All functions of the compression library are documented in the file zlib.h
-files zlib-3.2.doc, deflate-1.2.doc and gzip-4.2.doc, available
+(volunteer to write man pages welcome, contact jloup@gzip.org). A usage
-in ftp://ftp.uu.net/pub/archiving/zip/doc
+example of the library is given in the file example.c which also tests that
+the library is working correctly. Another example is given in the file
+minigzip.c. The compression library itself is composed of all source files
+except example.c and minigzip.c.
 
-All functions of the compression library are documented in the file
+To compile all files and run the test program, follow the instructions
-zlib.h. A usage example of the library is given in the file example.c
+given at the top of Makefile. In short "make test; make install"
-which also tests that the library is working correctly. Another
+should work for most machines. For Unix: "configure; make test; make install"
-example is given in the file minigzip.c.
+For MSDOS, use one of the special makefiles such as Makefile.msc.
+For VMS, use Make_vms.com or descrip.mms.
 
-To compile all files and run the test program, just type: make test
+Questions about zlib should be sent to <zlib@quest.jpl.nasa.gov>, or to
-(For MSDOS, use one of the special makefiles such as Makefile.msc;
+Gilles Vollant <info@winimage.com> for the Windows DLL version.
-for VMS, use Make_vms.com or descrip.mms.)
+The zlib home page is http://www.cdrom.com/pub/infozip/zlib/
-To install the zlib library (libz.a) in /usr/local/lib, type: make install
+The official zlib ftp site is ftp://ftp.cdrom.com/pub/infozip/zlib/
-To install in a different directory, use for example:
+Before reporting a problem, please check those sites to verify that
-  make install prefix=$HOME
+you have the latest version of zlib; otherwise get the latest version and
-This will install in $HOME/lib instead of /usr/local/lib.
+check whether the problem still exists or not.
 
-Questions about zlib should be sent to <zlib@quest.jpl.nasa.gov>.
+Mark Nelson <markn@tiny.com> wrote an article about zlib for the Jan. 1997
+issue of  Dr. Dobb's Journal; a copy of the article is available in
+http://web2.airmail.net/markn/articles/zlibtool/zlibtool.htm
+
+The changes made in version 1.1.3 are documented in the file ChangeLog.
+The main changes since 1.1.2 are:
+
+- fix "an inflate input buffer bug that shows up on rare but persistent
+  occasions" (Mark)
+- fix gzread and gztell for concatenated .gz files (Didier Le Botlan)
+- fix gzseek(..., SEEK_SET) in write mode
+- fix crc check after a gzeek (Frank Faubert)
+- fix miniunzip when the last entry in a zip file is itself a zip file
+  (J Lillge)
+- add contrib/asm586 and contrib/asm686 (Brian Raiter)
+  See http://www.muppetlabs.com/~breadbox/software/assembly.html
+- add support for Delphi 3 in contrib/delphi (Bob Dellaca)
+- add support for C++Builder 3 and Delphi 3 in contrib/delphi2 (Davide Moretti)
+- do not exit prematurely in untgz if 0 at start of block (Magnus Holmgren)
+- use macro EXTERN instead of extern to support DLL for BeOS (Sander Stoks)
+- added a FAQ file
+
+plus many changes for portability.
+
+Unsupported third party contributions are provided in directory "contrib".
+
+A Java implementation of zlib is available in the Java Development Kit 1.1
+http://www.javasoft.com/products/JDK/1.1/docs/api/Package-java.util.zip.html
+See the zlib home page http://www.cdrom.com/pub/infozip/zlib/ for details.
+
+A Perl interface to zlib written by Paul Marquess <pmarquess@bfsec.bt.co.uk>
+is in the CPAN (Comprehensive Perl Archive Network) sites, such as:
+ftp://ftp.cis.ufl.edu/pub/perl/CPAN/modules/by-module/Compress/Compress-Zlib*
+
+A Python interface to zlib written by A.M. Kuchling <amk@magnet.com>
+is available in Python 1.5 and later versions, see
+http://www.python.org/doc/lib/module-zlib.html
+
+A zlib binding for TCL written by Andreas Kupries <a.kupries@westend.com>
+is availlable at http://www.westend.com/~kupries/doc/trf/man/man.html
+
+An experimental package to read and write files in .zip format,
+written on top of zlib by Gilles Vollant <info@winimage.com>, is
+available at http://www.winimage.com/zLibDll/unzip.html
+and also in the contrib/minizip directory of zlib.
 
-The changes made in version 1.0 are documented in the file ChangeLog.
-The main changes since 0.95 are:
-- allow compression level 0 (no compression)
-- add deflateParams in zlib.h: allow dynamic change of compression level
-  and compression strategy.
-- test large buffers and deflateParams in example.c
-- declare Z_DEFLATED in zlib.h (possible parameter for deflateInit2)
-- fixes for 64-bit systems (needed for Alpha and Cray)
-- always return Z_BUF_ERROR when deflate() has nothing to do
-- fix some very unlikely race conditions.
-- several minor fixes for better portability
-- free in reverse order of allocation to help memory manager
 
 Notes for some targets:
 
-- For MSDOS, the small and medium models have been tested only with
+- To build a Windows DLL version, include in a DLL project zlib.def, zlib.rc
-  Microsoft C.  (This should work for Borland C also, but I don't have
+  and all .c files except example.c and minigzip.c; compile with -DZLIB_DLL
-  a Borland compiler to test with.) The small model was tested with
+  The zlib DLL support was initially done by Alessandro Iacopetti and is
-  Turbo C but only with reduced performance to avoid any far
+  now maintained by Gilles Vollant <info@winimage.com>. Check the zlib DLL
-  allocation; it was tested with -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
+  home page at http://www.winimage.com/zLibDll
 
-  MS Visual C++1.5 in far model gives:
+  From Visual Basic, you can call the DLL functions which do not take
-     warning C4746: 'z_errmsg' : unsized array treated as '__far'
+  a structure as argument: compress, uncompress and all gz* functions.
-     warning C4746: 'inflate_mask' : unsized array treated as  '__far'
+  See contrib/visual-basic.txt for more information, or get
-  Ignore those warnings.
+  http://www.tcfb.com/dowseware/cmp-z-it.zip
 
-- For 64-bit Iris, deflate.c must be compiled without any optimization.
+- For 64-bit Irix, deflate.c must be compiled without any optimization.
-  With -O, one libpng test fails. The test works in 32 bit mode (with the
+  With -O, one libpng test fails. The test works in 32 bit mode (with
-  -32 compiler flag).
+  the -n32 compiler flag). The compiler bug has been reported to SGI.
 
+- zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1   
+  it works when compiled with cc.
+
+- on Digital Unix 4.0D (formely OSF/1) on AlphaServer, the cc option -std1
+  is necessary to get gzprintf working correctly. This is done by configure.
+
+- zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works
+  with other compilers. Use "make test" to check your compiler.
+
+- gzdopen is not supported on RISCOS, BEOS and by some Mac compilers.
+
+- For Turbo C the small model is supported only with reduced performance to
+  avoid any far allocation; it was tested with -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
+
+- For PalmOs, see http://www.cs.uit.no/~perm/PASTA/pilot/software.html
+  Per Harald Myrvang <perm@stud.cs.uit.no>
+
+
+Acknowledgments:
+
+  The deflate format used by zlib was defined by Phil Katz. The deflate
+  and zlib specifications were written by L. Peter Deutsch. Thanks to all the
+  people who reported problems and suggested various improvements in zlib;
+  they are too numerous to cite here.
 
 Copyright notice:
 
- (C) 1995-1996 Jean-loup Gailly and Mark Adler
+ (C) 1995-1998 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
@@ -72,7 +136,7 @@ Copyright notice:
   3. This notice may not be removed or altered from any source distribution.
 
   Jean-loup Gailly        Mark Adler
-  gzip@prep.ai.mit.edu    madler@alumni.caltech.edu
+  jloup@gzip.org          madler@alumni.caltech.edu
 
 If you use the zlib library in a product, we would appreciate *not*
 receiving lengthy legal documents to sign. The sources are provided

adler32.c

@@ -1,9 +1,9 @@
 /* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995 Mark Adler
+ * Copyright (C) 1995-1998 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
-/* $Id: adler32.c,v 1.6 1995/05/03 17:27:08 jloup Exp $ */
+/* @(#) $Id$ */
 
 #include "zlib.h"
 
@@ -11,16 +11,16 @@
 #define NMAX 5552
 /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
 
-#define DO1(buf)  {s1 += *buf++; s2 += s1;}
+#define DO1(buf,i)  {s1 += buf[i]; s2 += s1;}
-#define DO2(buf)  DO1(buf); DO1(buf);
+#define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
-#define DO4(buf)  DO2(buf); DO2(buf);
+#define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
-#define DO8(buf)  DO4(buf); DO4(buf);
+#define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
-#define DO16(buf) DO8(buf); DO8(buf);
+#define DO16(buf)   DO8(buf,0); DO8(buf,8);
 
 /* ========================================================================= */
-uLong adler32(adler, buf, len)
+uLong ZEXPORT adler32(adler, buf, len)
     uLong adler;
-    Bytef *buf;
+    const Bytef *buf;
     uInt len;
 {
     unsigned long s1 = adler & 0xffff;
@@ -34,10 +34,12 @@ uLong adler32(adler, buf, len)
         len -= k;
         while (k >= 16) {
             DO16(buf);
+	    buf += 16;
             k -= 16;
         }
         if (k != 0) do {
-            DO1(buf);
+            s1 += *buf++;
+	    s2 += s1;
         } while (--k);
         s1 %= BASE;
         s2 %= BASE;

algorithm.txt

@@ -0,0 +1,213 @@
+1. Compression algorithm (deflate)
+
+The deflation algorithm used by gzip (also zip and zlib) is a variation of
+LZ77 (Lempel-Ziv 1977, see reference below). It finds duplicated strings in
+the input data.  The second occurrence of a string is replaced by a
+pointer to the previous string, in the form of a pair (distance,
+length).  Distances are limited to 32K bytes, and lengths are limited
+to 258 bytes. When a string does not occur anywhere in the previous
+32K bytes, it is emitted as a sequence of literal bytes.  (In this
+description, `string' must be taken as an arbitrary sequence of bytes,
+and is not restricted to printable characters.)
+
+Literals or match lengths are compressed with one Huffman tree, and
+match distances are compressed with another tree. The trees are stored
+in a compact form at the start of each block. The blocks can have any
+size (except that the compressed data for one block must fit in
+available memory). A block is terminated when deflate() determines that
+it would be useful to start another block with fresh trees. (This is
+somewhat similar to the behavior of LZW-based _compress_.)
+
+Duplicated strings are found using a hash table. All input strings of
+length 3 are inserted in the hash table. A hash index is computed for
+the next 3 bytes. If the hash chain for this index is not empty, all
+strings in the chain are compared with the current input string, and
+the longest match is selected.
+
+The hash chains are searched starting with the most recent strings, to
+favor small distances and thus take advantage of the Huffman encoding.
+The hash chains are singly linked. There are no deletions from the
+hash chains, the algorithm simply discards matches that are too old.
+
+To avoid a worst-case situation, very long hash chains are arbitrarily
+truncated at a certain length, determined by a runtime option (level
+parameter of deflateInit). So deflate() does not always find the longest
+possible match but generally finds a match which is long enough.
+
+deflate() also defers the selection of matches with a lazy evaluation
+mechanism. After a match of length N has been found, deflate() searches for
+a longer match at the next input byte. If a longer match is found, the
+previous match is truncated to a length of one (thus producing a single
+literal byte) and the process of lazy evaluation begins again. Otherwise,
+the original match is kept, and the next match search is attempted only N
+steps later.
+
+The lazy match evaluation is also subject to a runtime parameter. If
+the current match is long enough, deflate() reduces the search for a longer
+match, thus speeding up the whole process. If compression ratio is more
+important than speed, deflate() attempts a complete second search even if
+the first match is already long enough.
+
+The lazy match evaluation is not performed for the fastest compression
+modes (level parameter 1 to 3). For these fast modes, new strings
+are inserted in the hash table only when no match was found, or
+when the match is not too long. This degrades the compression ratio
+but saves time since there are both fewer insertions and fewer searches.
+
+
+2. Decompression algorithm (inflate)
+
+2.1 Introduction
+
+The real question is, given a Huffman tree, how to decode fast.  The most
+important realization is that shorter codes are much more common than
+longer codes, so pay attention to decoding the short codes fast, and let
+the long codes take longer to decode.
+
+inflate() sets up a first level table that covers some number of bits of
+input less than the length of longest code.  It gets that many bits from the
+stream, and looks it up in the table.  The table will tell if the next
+code is that many bits or less and how many, and if it is, it will tell
+the value, else it will point to the next level table for which inflate()
+grabs more bits and tries to decode a longer code.
+
+How many bits to make the first lookup is a tradeoff between the time it
+takes to decode and the time it takes to build the table.  If building the
+table took no time (and if you had infinite memory), then there would only
+be a first level table to cover all the way to the longest code.  However,
+building the table ends up taking a lot longer for more bits since short
+codes are replicated many times in such a table.  What inflate() does is
+simply to make the number of bits in the first table a variable, and set it
+for the maximum speed.
+
+inflate() sends new trees relatively often, so it is possibly set for a
+smaller first level table than an application that has only one tree for
+all the data.  For inflate, which has 286 possible codes for the
+literal/length tree, the size of the first table is nine bits.  Also the
+distance trees have 30 possible values, and the size of the first table is
+six bits.  Note that for each of those cases, the table ended up one bit
+longer than the ``average'' code length, i.e. the code length of an
+approximately flat code which would be a little more than eight bits for
+286 symbols and a little less than five bits for 30 symbols.  It would be
+interesting to see if optimizing the first level table for other
+applications gave values within a bit or two of the flat code size.
+
+
+2.2 More details on the inflate table lookup
+
+Ok, you want to know what this cleverly obfuscated inflate tree actually  
+looks like.  You are correct that it's not a Huffman tree.  It is simply a  
+lookup table for the first, let's say, nine bits of a Huffman symbol.  The  
+symbol could be as short as one bit or as long as 15 bits.  If a particular  
+symbol is shorter than nine bits, then that symbol's translation is duplicated
+in all those entries that start with that symbol's bits.  For example, if the  
+symbol is four bits, then it's duplicated 32 times in a nine-bit table.  If a  
+symbol is nine bits long, it appears in the table once.
+
+If the symbol is longer than nine bits, then that entry in the table points  
+to another similar table for the remaining bits.  Again, there are duplicated  
+entries as needed.  The idea is that most of the time the symbol will be short
+and there will only be one table look up.  (That's whole idea behind data  
+compression in the first place.)  For the less frequent long symbols, there  
+will be two lookups.  If you had a compression method with really long  
+symbols, you could have as many levels of lookups as is efficient.  For  
+inflate, two is enough.
+
+So a table entry either points to another table (in which case nine bits in  
+the above example are gobbled), or it contains the translation for the symbol  
+and the number of bits to gobble.  Then you start again with the next  
+ungobbled bit.
+
+You may wonder: why not just have one lookup table for how ever many bits the  
+longest symbol is?  The reason is that if you do that, you end up spending  
+more time filling in duplicate symbol entries than you do actually decoding.   
+At least for deflate's output that generates new trees every several 10's of  
+kbytes.  You can imagine that filling in a 2^15 entry table for a 15-bit code  
+would take too long if you're only decoding several thousand symbols.  At the  
+other extreme, you could make a new table for every bit in the code.  In fact,
+that's essentially a Huffman tree.  But then you spend two much time  
+traversing the tree while decoding, even for short symbols.
+
+So the number of bits for the first lookup table is a trade of the time to  
+fill out the table vs. the time spent looking at the second level and above of
+the table.
+
+Here is an example, scaled down:
+
+The code being decoded, with 10 symbols, from 1 to 6 bits long:
+
+A: 0
+B: 10
+C: 1100
+D: 11010
+E: 11011
+F: 11100
+G: 11101
+H: 11110
+I: 111110
+J: 111111
+
+Let's make the first table three bits long (eight entries):
+
+000: A,1
+001: A,1
+010: A,1
+011: A,1
+100: B,2
+101: B,2
+110: -> table X (gobble 3 bits)
+111: -> table Y (gobble 3 bits)
+
+Each entry is what the bits decode to and how many bits that is, i.e. how  
+many bits to gobble.  Or the entry points to another table, with the number of
+bits to gobble implicit in the size of the table.
+
+Table X is two bits long since the longest code starting with 110 is five bits
+long:
+
+00: C,1
+01: C,1
+10: D,2
+11: E,2
+
+Table Y is three bits long since the longest code starting with 111 is six  
+bits long:
+
+000: F,2
+001: F,2
+010: G,2
+011: G,2
+100: H,2
+101: H,2
+110: I,3
+111: J,3
+
+So what we have here are three tables with a total of 20 entries that had to  
+be constructed.  That's compared to 64 entries for a single table.  Or  
+compared to 16 entries for a Huffman tree (six two entry tables and one four  
+entry table).  Assuming that the code ideally represents the probability of  
+the symbols, it takes on the average 1.25 lookups per symbol.  That's compared
+to one lookup for the single table, or 1.66 lookups per symbol for the  
+Huffman tree.
+
+There, I think that gives you a picture of what's going on.  For inflate, the  
+meaning of a particular symbol is often more than just a letter.  It can be a  
+byte (a "literal"), or it can be either a length or a distance which  
+indicates a base value and a number of bits to fetch after the code that is  
+added to the base value.  Or it might be the special end-of-block code.  The  
+data structures created in inftrees.c try to encode all that information  
+compactly in the tables.
+
+
+Jean-loup Gailly        Mark Adler
+jloup@gzip.org          madler@alumni.caltech.edu
+
+
+References:
+
+[LZ77] Ziv J., Lempel A., ``A Universal Algorithm for Sequential Data
+Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3,
+pp. 337-343.
+
+``DEFLATE Compressed Data Format Specification'' available in
+ftp://ds.internic.net/rfc/rfc1951.txt

amiga/Makefile.pup

@@ -0,0 +1,66 @@
+# Amiga powerUP (TM) Makefile
+# makefile for libpng and SAS C V6.58/7.00 PPC compiler
+# Copyright (C) 1998 by Andreas R. Kleinert
+
+CC       = scppc
+CFLAGS   = NOSTKCHK NOSINT OPTIMIZE OPTGO OPTPEEP OPTINLOCAL OPTINL \
+           OPTLOOP OPTRDEP=8 OPTDEP=8 OPTCOMP=8
+LIBNAME  = libzip.a
+AR       = ppc-amigaos-ar
+AR_FLAGS = cr
+RANLIB   = ppc-amigaos-ranlib
+LDFLAGS  = -r -o
+LDLIBS   = LIB:scppc.a
+LN       = ppc-amigaos-ld
+RM       = delete quiet
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example minigzip
+
+test: all
+        example
+        echo hello world | minigzip | minigzip -d
+
+$(LIBNAME): $(OBJS)
+            $(AR) $(AR_FLAGS) $@ $(OBJS)
+            $(RANLIB) $@
+
+example: example.o $(LIBNAME)
+        $(LN) $(LDFLAGS) example LIB:c_ppc.o example.o $(LIBNAME) $(LDLIBS) LIB:end.o
+
+minigzip: minigzip.o $(LIBNAME)
+        $(LN) $(LDFLAGS) minigzip LIB:c_ppc.o minigzip.o $(LIBNAME) $(LDLIBS) LIB:end.o
+
+clean:
+        $(RM) *.o example minigzip $(LIBNAME) foo.gz
+
+zip:
+        zip -ul9 zlib README ChangeLog Makefile Make????.??? Makefile.?? \
+          descrip.mms *.[ch]
+
+tgz:
+        cd ..; tar cfz zlib/zlib.tgz zlib/README zlib/ChangeLog zlib/Makefile \
+          zlib/Make????.??? zlib/Makefile.?? zlib/descrip.mms zlib/*.[ch]
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zutil.h zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: zutil.h zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzio.o: zutil.h zlib.h zconf.h
+infblock.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
+infcodes.o: zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h inffast.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h infblock.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+infutil.o: zutil.h zlib.h zconf.h inftrees.h infutil.h
+minigzip.o: zlib.h zconf.h
+trees.o: deflate.h zutil.h zlib.h zconf.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h

amiga/Makefile.sas

@@ -0,0 +1,64 @@
+# SMakefile for zlib
+# Modified from the standard UNIX Makefile Copyright Jean-loup Gailly
+# Osma Ahvenlampi <Osma.Ahvenlampi@hut.fi>
+# Amiga, SAS/C 6.56 & Smake
+
+CC=sc
+CFLAGS=OPT
+#CFLAGS=OPT CPU=68030
+#CFLAGS=DEBUG=LINE
+LDFLAGS=LIB z.lib
+
+SCOPTIONS=OPTSCHED OPTINLINE OPTALIAS OPTTIME OPTINLOCAL STRMERGE \
+       NOICONS PARMS=BOTH NOSTACKCHECK UTILLIB NOVERSION ERRORREXX 
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: SCOPTIONS example minigzip
+
+test: all
+	`cd`/example
+	echo hello world | minigzip | minigzip -d 
+
+install: z.lib
+	copy zlib.h zconf.h INCLUDE: clone
+	copy z.lib LIB: clone
+
+z.lib: $(OBJS)
+	oml z.lib r $(OBJS)
+
+example: example.o z.lib
+	$(CC) $(CFLAGS) LINK TO $@ example.o $(LDFLAGS)
+
+minigzip: minigzip.o z.lib
+	$(CC) $(CFLAGS) LINK TO $@ minigzip.o $(LDFLAGS)
+
+clean:
+	-delete force quiet *.o example minigzip z.lib foo.gz *.lnk SCOPTIONS
+
+SCOPTIONS: Smakefile
+        copy to $@ <from <
+$(SCOPTIONS)
+<
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zutil.h zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: zutil.h zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzio.o: zutil.h zlib.h zconf.h
+infblock.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
+infcodes.o: zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h inffast.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h infblock.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+infutil.o: zutil.h zlib.h zconf.h inftrees.h infutil.h
+minigzip.o: zlib.h zconf.h
+trees.o: deflate.h zutil.h zlib.h zconf.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h

compress.c

@@ -1,38 +1,39 @@
 /* compress.c -- compress a memory buffer
- * Copyright (C) 1995 Jean-loup Gailly.
+ * Copyright (C) 1995-1998 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
-/* $Id: compress.c,v 1.6 1995/05/03 17:27:08 jloup Exp $ */
+/* @(#) $Id$ */
 
 #include "zlib.h"
 
 /* ===========================================================================
-     Compresses the source buffer into the destination buffer.  sourceLen is
+     Compresses the source buffer into the destination buffer. The level
-   the byte length of the source buffer. Upon entry, destLen is the total
+   parameter has the same meaning as in deflateInit.  sourceLen is the byte
-   size of the destination buffer, which must be at least 0.1% larger than
+   length of the source buffer. Upon entry, destLen is the total size of the
-   sourceLen plus 8 bytes. Upon exit, destLen is the actual size of the
+   destination buffer, which must be at least 0.1% larger than sourceLen plus
-   compressed buffer.
+   12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
-     This function can be used to compress a whole file at once if the
+
-   input file is mmap'ed.
+     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
-     compress returns Z_OK if success, Z_MEM_ERROR if there was not
+   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
-   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   Z_STREAM_ERROR if the level parameter is invalid.
-   buffer.
 */
-int compress (dest, destLen, source, sourceLen)
+int ZEXPORT compress2 (dest, destLen, source, sourceLen, level)
     Bytef *dest;
     uLongf *destLen;
-    Bytef *source;
+    const Bytef *source;
     uLong sourceLen;
+    int level;
 {
     z_stream stream;
     int err;
 
-    stream.next_in = source;
+    stream.next_in = (Bytef*)source;
     stream.avail_in = (uInt)sourceLen;
+#ifdef MAXSEG_64K
     /* Check for source > 64K on 16-bit machine: */
     if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
-
+#endif
     stream.next_out = dest;
     stream.avail_out = (uInt)*destLen;
     if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
@@ -41,7 +42,7 @@ int compress (dest, destLen, source, sourceLen)
     stream.zfree = (free_func)0;
     stream.opaque = (voidpf)0;
 
-    err = deflateInit(&stream, Z_DEFAULT_COMPRESSION);
+    err = deflateInit(&stream, level);
     if (err != Z_OK) return err;
 
     err = deflate(&stream, Z_FINISH);
@@ -54,3 +55,14 @@ int compress (dest, destLen, source, sourceLen)
     err = deflateEnd(&stream);
     return err;
 }
+
+/* ===========================================================================
+ */
+int ZEXPORT compress (dest, destLen, source, sourceLen)
+    Bytef *dest;
+    uLongf *destLen;
+    const Bytef *source;
+    uLong sourceLen;
+{
+    return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION);
+}

configure

@@ -0,0 +1,212 @@
+#!/bin/sh
+# configure script for zlib. This script is needed only if
+# you wish to build a shared library and your system supports them,
+# of if you need special compiler, flags or install directory.
+# Otherwise, you can just use directly "make test; make install"
+#
+# To create a shared library, use "configure --shared"; by default a static
+# library is created. If the primitive shared library support provided here
+# does not work, use ftp://prep.ai.mit.edu/pub/gnu/libtool-*.tar.gz
+#
+# To impose specific compiler or flags or install directory, use for example:
+#    prefix=$HOME CC=cc CFLAGS="-O4" ./configure
+# or for csh/tcsh users:
+#    (setenv prefix $HOME; setenv CC cc; setenv CFLAGS "-O4"; ./configure)
+# LDSHARED is the command to be used to create a shared library
+
+# Incorrect settings of CC or CFLAGS may prevent creating a shared library.
+# If you have problems, try without defining CC and CFLAGS before reporting
+# an error.
+
+LIBS=libz.a
+SHAREDLIB=libz.so
+VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`
+AR=${AR-"ar rc"}
+RANLIB=${RANLIB-"ranlib"}
+prefix=${prefix-/usr/local}
+exec_prefix=${exec_prefix-'${prefix}'}
+libdir=${libdir-'${exec_prefix}/lib'}
+includedir=${includedir-'${prefix}/include'}
+shared_ext='.so'
+shared=0
+gcc=0
+old_cc="$CC"
+old_cflags="$CFLAGS"
+
+while test $# -ge 1
+do
+case "$1" in
+    -h* | --h*)
+      echo 'usage:'
+      echo '  configure [--shared] [--prefix=PREFIX]  [--exec_prefix=EXPREFIX]'
+      echo '     [--libdir=LIBDIR] [--includedir=INCLUDEDIR]'
+        exit 0;;
+    -p*=* | --p*=*) prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
+    -e*=* | --e*=*) exec_prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
+    -l*=* | --libdir=*) libdir=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
+    -i*=* | --includedir=*) includedir=`echo $1 | sed 's/[-a-z_]*=//'`;shift;;
+    -p* | --p*) prefix="$2"; shift; shift;;
+    -e* | --e*) exec_prefix="$2"; shift; shift;;
+    -l* | --l*) libdir="$2"; shift; shift;;
+    -i* | --i*) includedir="$2"; shift; shift;;
+    -s* | --s*) shared=1; shift;;
+    esac
+done
+
+test=ztest$$
+cat > $test.c <<EOF
+extern int getchar();
+int hello() {return getchar();}
+EOF
+
+test -z "$CC" && echo Checking for gcc...
+cc=${CC-gcc}
+cflags=${CFLAGS-"-O3"}
+# to force the asm version use: CFLAGS="-O3 -DASMV" ./configure
+case "$cc" in
+  *gcc*) gcc=1;;
+esac
+
+if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
+  CC="$cc"
+  SFLAGS=${CFLAGS-"-fPIC -O3"}
+  CFLAGS="$cflags"
+  case `(uname -s || echo unknown) 2>/dev/null` in
+  Linux | linux) LDSHARED=${LDSHARED-"gcc -shared -Wl,-soname,libz.so.1"};;
+  *)             LDSHARED=${LDSHARED-"gcc -shared"};;
+  esac
+else
+  # find system name and corresponding cc options
+  CC=${CC-cc}
+  case `(uname -sr || echo unknown) 2>/dev/null` in
+  HP-UX*)    SFLAGS=${CFLAGS-"-O +z"}
+	     CFLAGS=${CFLAGS-"-O"}
+#	     LDSHARED=${LDSHARED-"ld -b +vnocompatwarnings"}
+	     LDSHARED=${LDSHARED-"ld -b"}
+	     shared_ext='.sl'
+	     SHAREDLIB='libz.sl';;
+  IRIX*)     SFLAGS=${CFLAGS-"-ansi -O2 -rpath ."}
+	     CFLAGS=${CFLAGS-"-ansi -O2"}
+	     LDSHARED=${LDSHARED-"cc -shared"};;
+  OSF1\ V4*) SFLAGS=${CFLAGS-"-O -std1"}
+	     CFLAGS=${CFLAGS-"-O -std1"}
+	     LDSHARED=${LDSHARED-"cc -shared  -Wl,-soname,$SHAREDLIB -Wl,-msym -Wl,-rpath,$(libdir) -Wl,-set_version,${VER}:1.0"};;
+  OSF1*)     SFLAGS=${CFLAGS-"-O -std1"}
+	     CFLAGS=${CFLAGS-"-O -std1"}
+	     LDSHARED=${LDSHARED-"cc -shared"};;
+  QNX*)      SFLAGS=${CFLAGS-"-4 -O"}
+             CFLAGS=${CFLAGS-"-4 -O"}
+	     LDSHARED=${LDSHARED-"cc"}
+             RANLIB=${RANLIB-"true"}
+             AR="cc -A";;
+  SCO_SV\ 3.2*) SFLAGS=${CFLAGS-"-O3 -dy -KPIC "}
+	     CFLAGS=${CFLAGS-"-O3"}
+	     LDSHARED=${LDSHARED-"cc -dy -KPIC -G"};;
+  SunOS\ 5*) SFLAGS=${CFLAGS-"-fast -xcg89 -KPIC -R."}
+             CFLAGS=${CFLAGS-"-fast -xcg89"}
+	     LDSHARED=${LDSHARED-"cc -G"};;
+  SunOS\ 4*) SFLAGS=${CFLAGS-"-O2 -PIC"}
+	     CFLAGS=${CFLAGS-"-O2"}
+	     LDSHARED=${LDSHARED-"ld"};;
+  UNIX_System_V\ 4.2.0) 
+	     SFLAGS=${CFLAGS-"-KPIC -O"}
+	     CFLAGS=${CFLAGS-"-O"}
+	     LDSHARED=${LDSHARED-"cc -G"};;
+  UNIX_SV\ 4.2MP)
+	     SFLAGS=${CFLAGS-"-Kconform_pic -O"}
+	     CFLAGS=${CFLAGS-"-O"}
+	     LDSHARED=${LDSHARED-"cc -G"};;
+  # send working options for other systems to support@gzip.org
+  *)         SFLAGS=${CFLAGS-"-O"}
+	     CFLAGS=${CFLAGS-"-O"}
+	     LDSHARED=${LDSHARED-"cc -shared"};;
+  esac
+fi
+
+if test $shared -eq 1; then
+  echo Checking for shared library support...
+  # we must test in two steps (cc then ld), required at least on SunOS 4.x
+  if test "`($CC -c $SFLAGS $test.c) 2>&1`" = "" &&
+     test "`($LDSHARED -o $test$shared_ext $test.o) 2>&1`" = ""; then
+    CFLAGS="$SFLAGS"
+    LIBS="$SHAREDLIB.$VER"
+    echo Building shared library $SHAREDLIB.$VER with $CC.
+  elif test -z "$old_cc" -a -z "$old_cflags"; then
+    echo No shared library suppport.
+    shared=0;
+  else
+    echo 'No shared library suppport; try without defining CC and CFLAGS'
+    shared=0;
+  fi
+fi
+if test $shared -eq 0; then
+  LDSHARED="$CC"
+  echo Building static library $LIBS version $VER with $CC.
+fi
+
+cat > $test.c <<EOF
+#include <unistd.h>
+int main() { return 0; }
+EOF
+if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+  CFLAGS="$CFLAGS -DHAVE_UNISTD_H"
+  echo "Checking for unistd.h... Yes."
+else
+  echo "Checking for unistd.h... No."
+fi
+
+cat > $test.c <<EOF
+#include <errno.h>
+int main() { return 0; }
+EOF
+if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+  echo "Checking for errno.h...	 Yes."
+else
+  echo "Checking for errno.h...	 No."
+  CFLAGS="$CFLAGS -DNO_ERRNO_H"
+fi
+
+cat > $test.c <<EOF
+#include <sys/types.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+caddr_t hello() {
+  return mmap((caddr_t)0, (off_t)0, PROT_READ, MAP_SHARED, 0, (off_t)0); 
+}
+EOF
+if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+  CFLAGS="$CFLAGS -DUSE_MMAP"
+  echo Checking for mmap support... Yes.
+else
+  echo Checking for mmap support... No.
+fi
+
+CPP=${CPP-"$CC -E"}
+case $CFLAGS in
+  *ASMV*)
+    if test "`nm $test.o | grep _hello`" = ""; then
+      CPP="$CPP -DNO_UNDERLINE"
+      echo Checking for underline in external names... No.
+    else
+      echo Checking for underline in external names... Yes.
+    fi;;
+esac
+
+rm -f $test.[co] $test$shared_ext
+
+# udpate Makefile
+sed < Makefile.in "
+/^CC *=/s%=.*%=$CC%
+/^CFLAGS *=/s%=.*%=$CFLAGS%
+/^CPP *=/s%=.*%=$CPP%
+/^LDSHARED *=/s%=.*%=$LDSHARED%
+/^LIBS *=/s%=.*%=$LIBS%
+/^SHAREDLIB *=/s%=.*%=$SHAREDLIB%
+/^AR *=/s%=.*%=$AR%
+/^RANLIB *=/s%=.*%=$RANLIB%
+/^VER *=/s%=.*%=$VER%
+/^prefix *=/s%=.*%=$prefix%
+/^exec_prefix *=/s%=.*%=$exec_prefix%
+/^libdir *=/s%=.*%=$libdir%
+/^includedir *=/s%=.*%=$includedir%
+" > Makefile

contrib/README.contrib

@@ -0,0 +1,34 @@
+All files under this contrib directory are UNSUPPORTED. There were
+provided by users of zlib and were not tested by the authors of zlib.
+Use at your own risk. Please contact the authors of the contributions
+for help about these, not the zlib authors. Thanks.
+
+
+asm386/     by Gilles Vollant <info@winimage.com>
+	386 asm code replacing longest_match(), for Visual C++ 4.2 and ML 6.11c
+
+asm586/ and asm686/    by Brian Raiter <breadbox@muppetlabs.com> 
+        asm code for Pentium and Pentium Pro
+        See http://www.muppetlabs.com/~breadbox/software/assembly.html
+
+delphi/      by Bob Dellaca <bobdl@xtra.co.nz>
+	Support for Delphi
+
+delphi2/     by Davide Moretti <dave@rimini.com>
+        Another support for C++Builder and Delphi
+
+minizip/    by Gilles Vollant <info@winimage.com>
+	Mini zip and unzip based on zlib
+        See http://www.winimage.com/zLibDll/unzip.html
+
+iostream/   by Kevin Ruland <kevin@rodin.wustl.edu>
+        A C++ I/O streams interface to the zlib gz* functions
+
+iostream2/  by Tyge L<>vset <Tyge.Lovset@cmr.no>
+	Another C++ I/O streams interface
+
+untgz/      by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+	A very simple tar.gz file extractor using zlib
+
+visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
+        How to use compress(), uncompress() and the gz* functions from VB.

contrib/asm386/gvmat32.asm

@@ -0,0 +1,559 @@
+;
+; gvmat32.asm -- Asm portion of the optimized longest_match for 32 bits x86
+; Copyright (C) 1995-1996 Jean-loup Gailly and Gilles Vollant.
+; File written by Gilles Vollant, by modifiying the longest_match
+;  from Jean-loup Gailly in deflate.c
+; It need wmask == 0x7fff
+;     (assembly code is faster with a fixed wmask)
+;
+; For Visual C++ 4.2 and ML 6.11c (version in directory \MASM611C of Win95 DDK)
+;   I compile with : "ml /coff /Zi /c gvmat32.asm"
+;
+
+;uInt longest_match_7fff(s, cur_match)
+;    deflate_state *s;
+;    IPos cur_match;                             /* current match */
+
+        NbStack         equ     76
+        cur_match       equ     dword ptr[esp+NbStack-0]
+        str_s           equ     dword ptr[esp+NbStack-4]
+; 5 dword on top (ret,ebp,esi,edi,ebx)
+        adrret          equ     dword ptr[esp+NbStack-8]
+        pushebp         equ     dword ptr[esp+NbStack-12]
+        pushedi         equ     dword ptr[esp+NbStack-16]
+        pushesi         equ     dword ptr[esp+NbStack-20]
+        pushebx         equ     dword ptr[esp+NbStack-24]
+
+        chain_length    equ     dword ptr [esp+NbStack-28]
+        limit           equ     dword ptr [esp+NbStack-32]
+        best_len        equ     dword ptr [esp+NbStack-36]
+        window          equ     dword ptr [esp+NbStack-40]
+        prev            equ     dword ptr [esp+NbStack-44]
+        scan_start      equ      word ptr [esp+NbStack-48]
+        wmask           equ     dword ptr [esp+NbStack-52]
+        match_start_ptr equ     dword ptr [esp+NbStack-56]
+        nice_match      equ     dword ptr [esp+NbStack-60]
+        scan            equ     dword ptr [esp+NbStack-64]
+
+        windowlen       equ     dword ptr [esp+NbStack-68]
+        match_start     equ     dword ptr [esp+NbStack-72]
+        strend          equ     dword ptr [esp+NbStack-76]
+        NbStackAdd      equ     (NbStack-24)
+
+    .386p
+
+    name    gvmatch
+    .MODEL  FLAT
+
+
+
+;  all the +4 offsets are due to the addition of pending_buf_size (in zlib
+;  in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, remove the +4).
+;  Note : these value are good with a 8 bytes boundary pack structure
+    dep_chain_length    equ     70h+4
+    dep_window          equ     2ch+4
+    dep_strstart        equ     60h+4
+    dep_prev_length     equ     6ch+4
+    dep_nice_match      equ     84h+4
+    dep_w_size          equ     20h+4
+    dep_prev            equ     34h+4
+    dep_w_mask          equ     28h+4
+    dep_good_match      equ     80h+4
+    dep_match_start     equ     64h+4
+    dep_lookahead       equ     68h+4
+
+
+_TEXT                   segment
+
+IFDEF NOUNDERLINE
+                        public  longest_match_7fff
+;                        public  match_init
+ELSE
+                        public  _longest_match_7fff
+;                        public  _match_init
+ENDIF
+
+    MAX_MATCH           equ     258
+    MIN_MATCH           equ     3
+    MIN_LOOKAHEAD       equ     (MAX_MATCH+MIN_MATCH+1)
+
+
+
+IFDEF NOUNDERLINE
+;match_init      proc near
+;                ret
+;match_init      endp
+ELSE
+;_match_init     proc near
+;                ret
+;_match_init     endp
+ENDIF
+
+
+IFDEF NOUNDERLINE
+longest_match_7fff   proc near
+ELSE
+_longest_match_7fff  proc near
+ENDIF
+
+        mov     edx,[esp+4]
+
+
+
+        push    ebp
+        push    edi
+        push    esi
+        push    ebx
+
+        sub     esp,NbStackAdd
+
+; initialize or check the variables used in match.asm.
+        mov     ebp,edx
+
+; chain_length = s->max_chain_length
+; if (prev_length>=good_match) chain_length >>= 2
+        mov     edx,[ebp+dep_chain_length]
+        mov     ebx,[ebp+dep_prev_length]
+        cmp     [ebp+dep_good_match],ebx
+        ja      noshr
+        shr     edx,2
+noshr:
+; we increment chain_length because in the asm, the --chain_lenght is in the beginning of the loop
+        inc     edx
+        mov     edi,[ebp+dep_nice_match]
+        mov     chain_length,edx
+        mov     eax,[ebp+dep_lookahead]
+        cmp     eax,edi
+; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+        jae     nolookaheadnicematch
+        mov     edi,eax
+nolookaheadnicematch:
+; best_len = s->prev_length
+        mov     best_len,ebx
+
+; window = s->window
+        mov     esi,[ebp+dep_window]
+        mov     ecx,[ebp+dep_strstart]
+        mov     window,esi
+
+        mov     nice_match,edi
+; scan = window + strstart
+        add     esi,ecx
+        mov     scan,esi
+; dx = *window
+        mov     dx,word ptr [esi]
+; bx = *(window+best_len-1)
+        mov     bx,word ptr [esi+ebx-1]
+        add     esi,MAX_MATCH-1
+; scan_start = *scan
+        mov     scan_start,dx
+; strend = scan + MAX_MATCH-1
+        mov     strend,esi
+; bx = scan_end = *(window+best_len-1)
+
+;    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+;        s->strstart - (IPos)MAX_DIST(s) : NIL;
+
+        mov     esi,[ebp+dep_w_size]
+        sub     esi,MIN_LOOKAHEAD
+; here esi = MAX_DIST(s)
+        sub     ecx,esi
+        ja      nodist
+        xor     ecx,ecx
+nodist:
+        mov     limit,ecx
+
+; prev = s->prev
+        mov     edx,[ebp+dep_prev]
+        mov     prev,edx
+
+;
+        mov     edx,dword ptr [ebp+dep_match_start]
+        mov     bp,scan_start
+        mov     eax,cur_match
+        mov     match_start,edx
+
+        mov     edx,window
+        mov     edi,edx
+        add     edi,best_len
+        mov     esi,prev
+        dec     edi
+; windowlen = window + best_len -1
+        mov     windowlen,edi
+
+        jmp     beginloop2
+        align   4
+
+; here, in the loop
+;       eax = ax = cur_match
+;       ecx = limit
+;        bx = scan_end
+;        bp = scan_start
+;       edi = windowlen (window + best_len -1)
+;       esi = prev
+
+
+;// here; chain_length <=16
+normalbeg0add16:
+        add     chain_length,16
+        jz      exitloop
+normalbeg0:
+        cmp     word ptr[edi+eax],bx
+        je      normalbeg2noroll
+rcontlabnoroll:
+; cur_match = prev[cur_match & wmask]
+        and     eax,7fffh
+        mov     ax,word ptr[esi+eax*2]
+; if cur_match > limit, go to exitloop
+        cmp     ecx,eax
+        jnb     exitloop
+; if --chain_length != 0, go to exitloop
+        dec     chain_length
+        jnz     normalbeg0
+        jmp     exitloop
+
+normalbeg2noroll:
+; if (scan_start==*(cur_match+window)) goto normalbeg2
+        cmp     bp,word ptr[edx+eax]
+        jne     rcontlabnoroll
+        jmp     normalbeg2
+
+contloop3:
+        mov     edi,windowlen
+
+; cur_match = prev[cur_match & wmask]
+        and     eax,7fffh
+        mov     ax,word ptr[esi+eax*2]
+; if cur_match > limit, go to exitloop
+        cmp     ecx,eax
+jnbexitloopshort1:
+        jnb     exitloop
+; if --chain_length != 0, go to exitloop
+
+
+; begin the main loop
+beginloop2:
+        sub     chain_length,16+1
+; if chain_length <=16, don't use the unrolled loop
+        jna     normalbeg0add16
+
+do16:
+        cmp     word ptr[edi+eax],bx
+        je      normalbeg2dc0
+
+maccn   MACRO   lab
+        and     eax,7fffh
+        mov     ax,word ptr[esi+eax*2]
+        cmp     ecx,eax
+        jnb     exitloop
+        cmp     word ptr[edi+eax],bx
+        je      lab
+        ENDM
+
+rcontloop0:
+        maccn   normalbeg2dc1
+
+rcontloop1:
+        maccn   normalbeg2dc2
+
+rcontloop2:
+        maccn   normalbeg2dc3
+
+rcontloop3:
+        maccn   normalbeg2dc4
+
+rcontloop4:
+        maccn   normalbeg2dc5
+
+rcontloop5:
+        maccn   normalbeg2dc6
+
+rcontloop6:
+        maccn   normalbeg2dc7
+
+rcontloop7:
+        maccn   normalbeg2dc8
+
+rcontloop8:
+        maccn   normalbeg2dc9
+
+rcontloop9:
+        maccn   normalbeg2dc10
+
+rcontloop10:
+        maccn   short normalbeg2dc11
+
+rcontloop11:
+        maccn   short normalbeg2dc12
+
+rcontloop12:
+        maccn   short normalbeg2dc13
+
+rcontloop13:
+        maccn   short normalbeg2dc14
+
+rcontloop14:
+        maccn   short normalbeg2dc15
+
+rcontloop15:
+        and     eax,7fffh
+        mov     ax,word ptr[esi+eax*2]
+        cmp     ecx,eax
+        jnb     exitloop
+
+        sub     chain_length,16
+        ja      do16
+        jmp     normalbeg0add16
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+normbeg MACRO   rcontlab,valsub
+; if we are here, we know that *(match+best_len-1) == scan_end
+        cmp     bp,word ptr[edx+eax]
+; if (match != scan_start) goto rcontlab
+        jne     rcontlab
+; calculate the good chain_length, and we'll compare scan and match string
+        add     chain_length,16-valsub
+        jmp     iseq
+        ENDM
+
+
+normalbeg2dc11:
+        normbeg rcontloop11,11
+
+normalbeg2dc12:
+        normbeg short rcontloop12,12
+
+normalbeg2dc13:
+        normbeg short rcontloop13,13
+
+normalbeg2dc14:
+        normbeg short rcontloop14,14
+
+normalbeg2dc15:
+        normbeg short rcontloop15,15
+
+normalbeg2dc10:
+        normbeg rcontloop10,10
+
+normalbeg2dc9:
+        normbeg rcontloop9,9
+
+normalbeg2dc8:
+        normbeg rcontloop8,8
+
+normalbeg2dc7:
+        normbeg rcontloop7,7
+
+normalbeg2dc6:
+        normbeg rcontloop6,6
+
+normalbeg2dc5:
+        normbeg rcontloop5,5
+
+normalbeg2dc4:
+        normbeg rcontloop4,4
+
+normalbeg2dc3:
+        normbeg rcontloop3,3
+
+normalbeg2dc2:
+        normbeg rcontloop2,2
+
+normalbeg2dc1:
+        normbeg rcontloop1,1
+
+normalbeg2dc0:
+        normbeg rcontloop0,0
+
+
+; we go in normalbeg2 because *(ushf*)(match+best_len-1) == scan_end
+
+normalbeg2:
+        mov     edi,window
+
+        cmp     bp,word ptr[edi+eax]
+        jne     contloop3                   ; if *(ushf*)match != scan_start, continue
+
+iseq:
+; if we are here, we know that *(match+best_len-1) == scan_end
+; and (match == scan_start)
+
+        mov     edi,edx
+        mov     esi,scan                    ; esi = scan
+        add     edi,eax                     ; edi = window + cur_match = match
+
+        mov     edx,[esi+3]                 ; compare manually dword at match+3
+        xor     edx,[edi+3]                 ; and scan +3
+
+        jz      begincompare                ; if equal, go to long compare
+
+; we will determine the unmatch byte and calculate len (in esi)
+        or      dl,dl
+        je      eq1rr
+        mov     esi,3
+        jmp     trfinval
+eq1rr:
+        or      dx,dx
+        je      eq1
+
+        mov     esi,4
+        jmp     trfinval
+eq1:
+        and     edx,0ffffffh
+        jz      eq11
+        mov     esi,5
+        jmp     trfinval
+eq11:
+        mov     esi,6
+        jmp     trfinval
+
+begincompare:
+        ; here we now scan and match begin same
+        add     edi,6
+        add     esi,6
+        mov     ecx,(MAX_MATCH-(2+4))/4     ; scan for at most MAX_MATCH bytes
+        repe    cmpsd                       ; loop until mismatch
+
+        je      trfin                       ; go to trfin if not unmatch
+; we determine the unmatch byte
+        sub     esi,4
+        mov     edx,[edi-4]
+        xor     edx,[esi]
+
+        or      dl,dl
+        jnz     trfin
+        inc     esi
+
+        or      dx,dx
+        jnz     trfin
+        inc     esi
+
+        and     edx,0ffffffh
+        jnz     trfin
+        inc     esi
+
+trfin:
+        sub     esi,scan          ; esi = len
+trfinval:
+; here we have finised compare, and esi contain len of equal string
+        cmp     esi,best_len        ; if len > best_len, go newbestlen
+        ja      short newbestlen
+; now we restore edx, ecx and esi, for the big loop
+        mov     esi,prev
+        mov     ecx,limit
+        mov     edx,window
+        jmp     contloop3
+
+newbestlen:
+        mov     best_len,esi        ; len become best_len
+
+        mov     match_start,eax     ; save new position as match_start
+        cmp     esi,nice_match      ; if best_len >= nice_match, exit
+        jae     exitloop
+        mov     ecx,scan
+        mov     edx,window          ; restore edx=window
+        add     ecx,esi
+        add     esi,edx
+
+        dec     esi
+        mov     windowlen,esi       ; windowlen = window + best_len-1
+        mov     bx,[ecx-1]          ; bx = *(scan+best_len-1) = scan_end
+
+; now we restore ecx and esi, for the big loop :
+        mov     esi,prev
+        mov     ecx,limit
+        jmp     contloop3
+
+exitloop:
+; exit : s->match_start=match_start
+        mov     ebx,match_start
+        mov     ebp,str_s
+        mov     ecx,best_len
+        mov     dword ptr [ebp+dep_match_start],ebx        
+        mov     eax,dword ptr [ebp+dep_lookahead]
+        cmp     ecx,eax
+        ja      minexlo
+        mov     eax,ecx
+minexlo:
+; return min(best_len,s->lookahead)
+        
+; restore stack and register ebx,esi,edi,ebp
+        add     esp,NbStackAdd
+
+        pop     ebx
+        pop     esi
+        pop     edi
+        pop     ebp
+        ret
+InfoAuthor:
+; please don't remove this string !
+; Your are free use gvmat32 in any fre or commercial apps if you don't remove the string in the binary!
+        db     0dh,0ah,"GVMat32 optimised assembly code written 1996-98 by Gilles Vollant",0dh,0ah
+
+
+
+IFDEF NOUNDERLINE
+longest_match_7fff   endp
+ELSE
+_longest_match_7fff  endp
+ENDIF
+
+
+IFDEF NOUNDERLINE
+cpudetect32     proc near
+ELSE
+_cpudetect32    proc near
+ENDIF
+
+
+	pushfd                  ; push original EFLAGS
+	pop     eax             ; get original EFLAGS
+	mov     ecx, eax        ; save original EFLAGS
+	xor     eax, 40000h     ; flip AC bit in EFLAGS
+	push    eax             ; save new EFLAGS value on stack
+	popfd                   ; replace current EFLAGS value
+	pushfd                  ; get new EFLAGS
+	pop     eax             ; store new EFLAGS in EAX
+	xor     eax, ecx        ; can<61>t toggle AC bit, processor=80386
+	jz      end_cpu_is_386  ; jump if 80386 processor
+	push    ecx
+	popfd                   ; restore AC bit in EFLAGS first
+
+	pushfd
+	pushfd
+	pop     ecx
+			
+	mov     eax, ecx        ; get original EFLAGS
+	xor     eax, 200000h    ; flip ID bit in EFLAGS
+	push    eax             ; save new EFLAGS value on stack
+	popfd                   ; replace current EFLAGS value
+	pushfd                  ; get new EFLAGS
+	pop		eax	            ; store new EFLAGS in EAX
+	popfd                   ; restore original EFLAGS
+	xor		eax, ecx        ; can<61>t toggle ID bit,
+	je		is_old_486		; processor=old
+
+	mov     eax,1
+	db      0fh,0a2h        ;CPUID   
+
+exitcpudetect:
+	ret
+
+end_cpu_is_386:
+	mov     eax,0300h
+	jmp     exitcpudetect
+
+is_old_486:
+	mov     eax,0400h
+	jmp     exitcpudetect
+
+IFDEF NOUNDERLINE
+cpudetect32     endp
+ELSE
+_cpudetect32    endp
+ENDIF
+
+_TEXT   ends
+end

contrib/asm386/gvmat32c.c

@@ -0,0 +1,200 @@
+/* gvmat32.c -- C portion of the optimized longest_match for 32 bits x86
+ * Copyright (C) 1995-1996 Jean-loup Gailly and Gilles Vollant.
+ * File written by Gilles Vollant, by modifiying the longest_match
+ *  from Jean-loup Gailly in deflate.c
+ *  it prepare all parameters and call the assembly longest_match_gvasm
+ *  longest_match execute standard C code is wmask != 0x7fff
+ *     (assembly code is faster with a fixed wmask)
+ *
+ */
+
+#include "deflate.h"
+
+#undef FAR
+#include <windows.h>
+
+#ifdef ASMV
+#define NIL 0
+
+#define UNALIGNED_OK
+
+
+/* if your C compiler don't add underline before function name,
+		define ADD_UNDERLINE_ASMFUNC */
+#ifdef ADD_UNDERLINE_ASMFUNC
+#define longest_match_7fff _longest_match_7fff
+#endif
+
+
+
+void match_init()
+{
+}
+
+unsigned long cpudetect32();
+
+uInt longest_match_c(
+    deflate_state *s,
+    IPos cur_match);                             /* current match */
+
+
+uInt longest_match_7fff(
+    deflate_state *s,
+    IPos cur_match);                             /* current match */
+
+uInt longest_match(
+    deflate_state *s,
+    IPos cur_match)                             /* current match */
+{
+	static uInt iIsPPro=2;
+
+    if ((s->w_mask == 0x7fff) && (iIsPPro==0))
+        return longest_match_7fff(s,cur_match);
+
+	if (iIsPPro==2)
+		iIsPPro = (((cpudetect32()/0x100)&0xf)>=6) ? 1 : 0;
+
+	return longest_match_c(s,cur_match);
+}
+
+
+
+uInt longest_match_c(s, cur_match)
+    deflate_state *s;
+    IPos cur_match;                             /* current match */
+{
+    unsigned chain_length = s->max_chain_length;/* max hash chain length */
+    register Bytef *scan = s->window + s->strstart; /* current string */
+    register Bytef *match;                       /* matched string */
+    register int len;                           /* length of current match */
+    int best_len = s->prev_length;              /* best match length so far */
+    int nice_match = s->nice_match;             /* stop if match long enough */
+    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+        s->strstart - (IPos)MAX_DIST(s) : NIL;
+    /* Stop when cur_match becomes <= limit. To simplify the code,
+     * we prevent matches with the string of window index 0.
+     */
+    Posf *prev = s->prev;
+    uInt wmask = s->w_mask;
+
+#ifdef UNALIGNED_OK
+    /* Compare two bytes at a time. Note: this is not always beneficial.
+     * Try with and without -DUNALIGNED_OK to check.
+     */
+    register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
+    register ush scan_start = *(ushf*)scan;
+    register ush scan_end   = *(ushf*)(scan+best_len-1);
+#else
+    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
+    register Byte scan_end1  = scan[best_len-1];
+    register Byte scan_end   = scan[best_len];
+#endif
+
+    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+     * It is easy to get rid of this optimization if necessary.
+     */
+    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
+
+    /* Do not waste too much time if we already have a good match: */
+    if (s->prev_length >= s->good_match) {
+        chain_length >>= 2;
+    }
+    /* Do not look for matches beyond the end of the input. This is necessary
+     * to make deflate deterministic.
+     */
+    if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
+
+    do {
+        Assert(cur_match < s->strstart, "no future");
+        match = s->window + cur_match;
+
+        /* Skip to next match if the match length cannot increase
+         * or if the match length is less than 2:
+         */
+#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
+        /* This code assumes sizeof(unsigned short) == 2. Do not use
+         * UNALIGNED_OK if your compiler uses a different size.
+         */
+        if (*(ushf*)(match+best_len-1) != scan_end ||
+            *(ushf*)match != scan_start) continue;
+
+        /* It is not necessary to compare scan[2] and match[2] since they are
+         * always equal when the other bytes match, given that the hash keys
+         * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
+         * strstart+3, +5, ... up to strstart+257. We check for insufficient
+         * lookahead only every 4th comparison; the 128th check will be made
+         * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
+         * necessary to put more guard bytes at the end of the window, or
+         * to check more often for insufficient lookahead.
+         */
+        Assert(scan[2] == match[2], "scan[2]?");
+        scan++, match++;
+        do {
+        } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 scan < strend);
+        /* The funny "do {}" generates better code on most compilers */
+
+        /* Here, scan <= window+strstart+257 */
+        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+        if (*scan == *match) scan++;
+
+        len = (MAX_MATCH - 1) - (int)(strend-scan);
+        scan = strend - (MAX_MATCH-1);
+
+#else /* UNALIGNED_OK */
+
+        if (match[best_len]   != scan_end  ||
+            match[best_len-1] != scan_end1 ||
+            *match            != *scan     ||
+            *++match          != scan[1])      continue;
+
+        /* The check at best_len-1 can be removed because it will be made
+         * again later. (This heuristic is not always a win.)
+         * It is not necessary to compare scan[2] and match[2] since they
+         * are always equal when the other bytes match, given that
+         * the hash keys are equal and that HASH_BITS >= 8.
+         */
+        scan += 2, match++;
+        Assert(*scan == *match, "match[2]?");
+
+        /* We check for insufficient lookahead only every 8th comparison;
+         * the 256th check will be made at strstart+258.
+         */
+        do {
+        } while (*++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 scan < strend);
+
+        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+
+        len = MAX_MATCH - (int)(strend - scan);
+        scan = strend - MAX_MATCH;
+
+#endif /* UNALIGNED_OK */
+
+        if (len > best_len) {
+            s->match_start = cur_match;
+            best_len = len;
+            if (len >= nice_match) break;
+#ifdef UNALIGNED_OK
+            scan_end = *(ushf*)(scan+best_len-1);
+#else
+            scan_end1  = scan[best_len-1];
+            scan_end   = scan[best_len];
+#endif
+        }
+    } while ((cur_match = prev[cur_match & wmask]) > limit
+             && --chain_length != 0);
+
+    if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+    return s->lookahead;
+}
+
+#endif /* ASMV */

contrib/asm386/mkgvmt32.bat

@@ -0,0 +1 @@
+c:\masm611\bin\ml /coff /Zi /c /Flgvmat32.lst gvmat32.asm

contrib/asm386/zlibvc.def

@@ -0,0 +1,74 @@
+LIBRARY		"zlib"
+
+DESCRIPTION	'"""zlib data compression library"""'
+
+
+VERSION		1.11
+
+
+HEAPSIZE	1048576,8192
+
+EXPORTS
+    adler32                        @1
+    compress                       @2
+    crc32                          @3
+    deflate                        @4
+    deflateCopy                    @5
+    deflateEnd                     @6
+    deflateInit2_                  @7
+    deflateInit_                   @8
+    deflateParams                  @9
+    deflateReset                   @10
+    deflateSetDictionary           @11
+    gzclose                        @12
+    gzdopen                        @13
+    gzerror                        @14
+    gzflush                        @15
+    gzopen                         @16
+    gzread                         @17
+    gzwrite                        @18
+    inflate                        @19
+    inflateEnd                     @20
+    inflateInit2_                  @21
+    inflateInit_                   @22
+    inflateReset                   @23
+    inflateSetDictionary           @24
+    inflateSync                    @25
+    uncompress                     @26
+    zlibVersion                    @27
+    gzprintf                       @28
+    gzputc                         @29
+    gzgetc                         @30
+    gzseek                         @31
+    gzrewind                       @32
+    gztell                         @33
+    gzeof                          @34
+    gzsetparams                    @35
+    zError                         @36
+    inflateSyncPoint               @37
+    get_crc_table                  @38
+    compress2                      @39
+    gzputs                         @40
+    gzgets                         @41
+
+	unzOpen                       @61
+	unzClose                      @62
+	unzGetGlobalInfo              @63
+	unzGetCurrentFileInfo         @64
+	unzGoToFirstFile              @65
+	unzGoToNextFile               @66
+	unzOpenCurrentFile            @67
+	unzReadCurrentFile            @68
+	unztell                       @70
+	unzeof                        @71
+	unzCloseCurrentFile           @72
+	unzGetGlobalComment           @73
+	unzStringFileNameCompare      @74
+	unzLocateFile                 @75
+	unzGetLocalExtrafield         @76
+
+	zipOpen                       @80
+	zipOpenNewFileInZip           @81
+	zipWriteInFileInZip           @82
+	zipCloseFileInZip             @83
+	zipClose                      @84

contrib/asm386/zlibvc.dsp

@@ -0,0 +1,651 @@
+# Microsoft Developer Studio Project File - Name="zlibvc" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 5.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102
+# TARGTYPE "Win32 (ALPHA) Dynamic-Link Library" 0x0602
+
+CFG=zlibvc - Win32 Release
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "zlibvc.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "zlibvc.mak" CFG="zlibvc - Win32 Release"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "zlibvc - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlibvc - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlibvc - Win32 ReleaseAxp" (based on\
+ "Win32 (ALPHA) Dynamic-Link Library")
+!MESSAGE "zlibvc - Win32 ReleaseWithoutAsm" (based on\
+ "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlibvc - Win32 ReleaseWithoutCrtdll" (based on\
+ "Win32 (x86) Dynamic-Link Library")
+!MESSAGE 
+
+# Begin Project
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir ".\Release"
+# PROP BASE Intermediate_Dir ".\Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir ".\Release"
+# PROP Intermediate_Dir ".\Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /FD /c
+# SUBTRACT CPP /YX
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "NDEBUG"
+# ADD RSC /l 0x40c /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /machine:I386
+# ADD LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
+# SUBTRACT LINK32 /pdb:none
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir ".\Debug"
+# PROP BASE Intermediate_Dir ".\Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir ".\Debug"
+# PROP Intermediate_Dir ".\Debug"
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /YX /c
+# ADD CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /FD /c
+# SUBTRACT CPP /YX
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "_DEBUG" /win32
+# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "_DEBUG"
+# ADD RSC /l 0x40c /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /debug /machine:I386
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /debug /machine:I386 /out:".\Debug\zlib.dll"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlibvc__"
+# PROP BASE Intermediate_Dir "zlibvc__"
+# PROP BASE Ignore_Export_Lib 0
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "zlibvc__"
+# PROP Intermediate_Dir "zlibvc__"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+CPP=cl.exe
+# ADD BASE CPP /nologo /MT /Gt0 /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /YX /FD /c
+# ADD CPP /nologo /MT /Gt0 /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /FD /c
+# SUBTRACT CPP /YX
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "NDEBUG"
+# ADD RSC /l 0x40c /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 crtdll.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /map /machine:ALPHA /nodefaultlib /out:".\Release\zlib.dll"
+# SUBTRACT BASE LINK32 /pdb:none
+# ADD LINK32 crtdll.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /map /machine:ALPHA /nodefaultlib /out:"zlibvc__\zlib.dll"
+# SUBTRACT LINK32 /pdb:none
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlibvc_0"
+# PROP BASE Intermediate_Dir "zlibvc_0"
+# PROP BASE Ignore_Export_Lib 0
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "zlibvc_0"
+# PROP Intermediate_Dir "zlibvc_0"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /YX /FD /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /FD /c
+# SUBTRACT CPP /YX
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "NDEBUG"
+# ADD RSC /l 0x40c /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
+# SUBTRACT BASE LINK32 /pdb:none
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\zlibvc_0\zlib.dll"
+# SUBTRACT LINK32 /pdb:none
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlibvc_1"
+# PROP BASE Intermediate_Dir "zlibvc_1"
+# PROP BASE Ignore_Export_Lib 0
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "zlibvc_1"
+# PROP Intermediate_Dir "zlibvc_1"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /YX /FD /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /FD /c
+# SUBTRACT CPP /YX
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "NDEBUG"
+# ADD RSC /l 0x40c /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
+# SUBTRACT BASE LINK32 /pdb:none
+# ADD LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\zlibvc_1\zlib.dll"
+# SUBTRACT LINK32 /pdb:none
+
+!ENDIF 
+
+# Begin Target
+
+# Name "zlibvc - Win32 Release"
+# Name "zlibvc - Win32 Debug"
+# Name "zlibvc - Win32 ReleaseAxp"
+# Name "zlibvc - Win32 ReleaseWithoutAsm"
+# Name "zlibvc - Win32 ReleaseWithoutCrtdll"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;hpj;bat;for;f90"
+# Begin Source File
+
+SOURCE=.\adler32.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_ADLER=\
+	".\zconf.h"\
+	".\zlib.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\compress.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_COMPR=\
+	".\zconf.h"\
+	".\zlib.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\crc32.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_CRC32=\
+	".\zconf.h"\
+	".\zlib.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\deflate.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_DEFLA=\
+	".\deflate.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\gvmat32c.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\gzio.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_GZIO_=\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\infblock.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFBL=\
+	".\infblock.h"\
+	".\infcodes.h"\
+	".\inftrees.h"\
+	".\infutil.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\infcodes.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFCO=\
+	".\infblock.h"\
+	".\infcodes.h"\
+	".\inffast.h"\
+	".\inftrees.h"\
+	".\infutil.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\inffast.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFFA=\
+	".\infblock.h"\
+	".\infcodes.h"\
+	".\inffast.h"\
+	".\inftrees.h"\
+	".\infutil.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\inflate.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFLA=\
+	".\infblock.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\inftrees.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFTR=\
+	".\inftrees.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\infutil.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFUT=\
+	".\infblock.h"\
+	".\infcodes.h"\
+	".\inftrees.h"\
+	".\infutil.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\trees.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_TREES=\
+	".\deflate.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\uncompr.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_UNCOM=\
+	".\zconf.h"\
+	".\zlib.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\unzip.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\zip.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\zlib.rc
+# End Source File
+# Begin Source File
+
+SOURCE=.\zlibvc.def
+# End Source File
+# Begin Source File
+
+SOURCE=.\zutil.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_ZUTIL=\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd"
+# Begin Source File
+
+SOURCE=.\deflate.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\infblock.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\infcodes.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\inffast.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\inftrees.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\infutil.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\zconf.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\zlib.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\zutil.h
+# End Source File
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project

contrib/asm386/zlibvc.dsw

@@ -0,0 +1,41 @@
+Microsoft Developer Studio Workspace File, Format Version 5.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "zlibstat"=.\zlibstat.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Project: "zlibvc"=.\zlibvc.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

contrib/asm586/README.586

@@ -0,0 +1,43 @@
+This is a patched version of zlib modified to use
+Pentium-optimized assembly code in the deflation algorithm. The files
+changed/added by this patch are:
+
+README.586
+match.S
+
+The effectiveness of these modifications is a bit marginal, as the the
+program's bottleneck seems to be mostly L1-cache contention, for which
+there is no real way to work around without rewriting the basic
+algorithm. The speedup on average is around 5-10% (which is generally
+less than the amount of variance between subsequent executions).
+However, when used at level 9 compression, the cache contention can
+drop enough for the assembly version to achieve 10-20% speedup (and
+sometimes more, depending on the amount of overall redundancy in the
+files). Even here, though, cache contention can still be the limiting
+factor, depending on the nature of the program using the zlib library.
+This may also mean that better improvements will be seen on a Pentium
+with MMX, which suffers much less from L1-cache contention, but I have
+not yet verified this.
+
+Note that this code has been tailored for the Pentium in particular,
+and will not perform well on the Pentium Pro (due to the use of a
+partial register in the inner loop).
+
+If you are using an assembler other than GNU as, you will have to
+translate match.S to use your assembler's syntax. (Have fun.)
+
+Brian Raiter
+breadbox@muppetlabs.com
+April, 1998
+
+
+Added for zlib 1.1.3:
+
+The patches come from
+http://www.muppetlabs.com/~breadbox/software/assembly.html
+
+To compile zlib with this asm file, copy match.S to the zlib directory
+then do:
+
+CFLAGS="-O3 -DASMV" ./configure
+make OBJA=match.o

contrib/asm586/match.S

@@ -0,0 +1,354 @@
+/* match.s -- Pentium-optimized version of longest_match()
+ * Written for zlib 1.1.2
+ * Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License.
+ */
+
+#ifndef NO_UNDERLINE
+#define	match_init	_match_init
+#define	longest_match	_longest_match
+#endif
+
+#define	MAX_MATCH	(258)
+#define	MIN_MATCH	(3)
+#define	MIN_LOOKAHEAD	(MAX_MATCH + MIN_MATCH + 1)
+#define	MAX_MATCH_8	((MAX_MATCH + 7) & ~7)
+
+/* stack frame offsets */
+
+#define	wmask			0	/* local copy of s->wmask	*/
+#define	window			4	/* local copy of s->window	*/
+#define	windowbestlen		8	/* s->window + bestlen		*/
+#define	chainlenscanend		12	/* high word: current chain len	*/
+					/* low word: last bytes sought	*/
+#define	scanstart		16	/* first two bytes of string	*/
+#define	scanalign		20	/* dword-misalignment of string	*/
+#define	nicematch		24	/* a good enough match size	*/
+#define	bestlen			28	/* size of best match so far	*/
+#define	scan			32	/* ptr to string wanting match	*/
+
+#define	LocalVarsSize		(36)
+/*	saved ebx		36 */
+/*	saved edi		40 */
+/*	saved esi		44 */
+/*	saved ebp		48 */
+/*	return address		52 */
+#define	deflatestate		56	/* the function arguments	*/
+#define	curmatch		60
+
+/* Offsets for fields in the deflate_state structure. These numbers
+ * are calculated from the definition of deflate_state, with the
+ * assumption that the compiler will dword-align the fields. (Thus,
+ * changing the definition of deflate_state could easily cause this
+ * program to crash horribly, without so much as a warning at
+ * compile time. Sigh.)
+ */
+#define	dsWSize			36
+#define	dsWMask			44
+#define	dsWindow		48
+#define	dsPrev			56
+#define	dsMatchLen		88
+#define	dsPrevMatch		92
+#define	dsStrStart		100
+#define	dsMatchStart		104
+#define	dsLookahead		108
+#define	dsPrevLen		112
+#define	dsMaxChainLen		116
+#define	dsGoodMatch		132
+#define	dsNiceMatch		136
+
+
+.file "match.S"
+
+.globl	match_init, longest_match
+
+.text
+
+/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
+
+longest_match:
+
+/* Save registers that the compiler may be using, and adjust %esp to	*/
+/* make room for our stack frame.					*/
+
+		pushl	%ebp
+		pushl	%edi
+		pushl	%esi
+		pushl	%ebx
+		subl	$LocalVarsSize, %esp
+
+/* Retrieve the function arguments. %ecx will hold cur_match		*/
+/* throughout the entire function. %edx will hold the pointer to the	*/
+/* deflate_state structure during the function's setup (before		*/
+/* entering the main loop).						*/
+
+		movl	deflatestate(%esp), %edx
+		movl	curmatch(%esp), %ecx
+
+/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;	*/
+
+		movl	dsNiceMatch(%edx), %eax
+		movl	dsLookahead(%edx), %ebx
+		cmpl	%eax, %ebx
+		jl	LookaheadLess
+		movl	%eax, %ebx
+LookaheadLess:	movl	%ebx, nicematch(%esp)
+
+/* register Bytef *scan = s->window + s->strstart;			*/
+
+		movl	dsWindow(%edx), %esi
+		movl	%esi, window(%esp)
+		movl	dsStrStart(%edx), %ebp
+		lea	(%esi,%ebp), %edi
+		movl	%edi, scan(%esp)
+
+/* Determine how many bytes the scan ptr is off from being		*/
+/* dword-aligned.							*/
+
+		movl	%edi, %eax
+		negl	%eax
+		andl	$3, %eax
+		movl	%eax, scanalign(%esp)
+
+/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ?			*/
+/*     s->strstart - (IPos)MAX_DIST(s) : NIL;				*/
+
+		movl	dsWSize(%edx), %eax
+		subl	$MIN_LOOKAHEAD, %eax
+		subl	%eax, %ebp
+		jg	LimitPositive
+		xorl	%ebp, %ebp
+LimitPositive:
+
+/* unsigned chain_length = s->max_chain_length;				*/
+/* if (s->prev_length >= s->good_match) {				*/
+/*     chain_length >>= 2;						*/
+/* }									*/
+
+		movl	dsPrevLen(%edx), %eax
+		movl	dsGoodMatch(%edx), %ebx
+		cmpl	%ebx, %eax
+		movl	dsMaxChainLen(%edx), %ebx
+		jl	LastMatchGood
+		shrl	$2, %ebx
+LastMatchGood:
+
+/* chainlen is decremented once beforehand so that the function can	*/
+/* use the sign flag instead of the zero flag for the exit test.	*/
+/* It is then shifted into the high word, to make room for the scanend	*/
+/* scanend value, which it will always accompany.			*/
+
+		decl	%ebx
+		shll	$16, %ebx
+
+/* int best_len = s->prev_length;					*/
+
+		movl	dsPrevLen(%edx), %eax
+		movl	%eax, bestlen(%esp)
+
+/* Store the sum of s->window + best_len in %esi locally, and in %esi.	*/
+
+		addl	%eax, %esi
+		movl	%esi, windowbestlen(%esp)
+
+/* register ush scan_start = *(ushf*)scan;				*/
+/* register ush scan_end   = *(ushf*)(scan+best_len-1);			*/
+
+		movw	(%edi), %bx
+		movw	%bx, scanstart(%esp)
+		movw	-1(%edi,%eax), %bx
+		movl	%ebx, chainlenscanend(%esp)
+
+/* Posf *prev = s->prev;						*/
+/* uInt wmask = s->w_mask;						*/
+
+		movl	dsPrev(%edx), %edi
+		movl	dsWMask(%edx), %edx
+		mov	%edx, wmask(%esp)
+
+/* Jump into the main loop.						*/
+
+		jmp	LoopEntry
+
+.balign 16
+
+/* do {
+ *     match = s->window + cur_match;
+ *     if (*(ushf*)(match+best_len-1) != scan_end ||
+ *         *(ushf*)match != scan_start) continue;
+ *     [...]
+ * } while ((cur_match = prev[cur_match & wmask]) > limit
+ *          && --chain_length != 0);
+ *
+ * Here is the inner loop of the function. The function will spend the
+ * majority of its time in this loop, and majority of that time will
+ * be spent in the first ten instructions.
+ *
+ * Within this loop:
+ * %ebx = chainlenscanend - i.e., ((chainlen << 16) | scanend)
+ * %ecx = curmatch
+ * %edx = curmatch & wmask
+ * %esi = windowbestlen - i.e., (window + bestlen)
+ * %edi = prev
+ * %ebp = limit
+ *
+ * Two optimization notes on the choice of instructions:
+ *
+ * The first instruction uses a 16-bit address, which costs an extra,
+ * unpairable cycle. This is cheaper than doing a 32-bit access and
+ * zeroing the high word, due to the 3-cycle misalignment penalty which
+ * would occur half the time. This also turns out to be cheaper than
+ * doing two separate 8-bit accesses, as the memory is so rarely in the
+ * L1 cache.
+ *
+ * The window buffer, however, apparently spends a lot of time in the
+ * cache, and so it is faster to retrieve the word at the end of the
+ * match string with two 8-bit loads. The instructions that test the
+ * word at the beginning of the match string, however, are executed
+ * much less frequently, and there it was cheaper to use 16-bit
+ * instructions, which avoided the necessity of saving off and
+ * subsequently reloading one of the other registers.
+ */
+LookupLoop:
+							/* 1 U & V  */
+		movw	(%edi,%edx,2), %cx		/* 2 U pipe */
+		movl	wmask(%esp), %edx		/* 2 V pipe */
+		cmpl	%ebp, %ecx			/* 3 U pipe */
+		jbe	LeaveNow			/* 3 V pipe */
+		subl	$0x00010000, %ebx		/* 4 U pipe */
+		js	LeaveNow			/* 4 V pipe */
+LoopEntry:	movb	-1(%esi,%ecx), %al		/* 5 U pipe */
+		andl	%ecx, %edx			/* 5 V pipe */
+		cmpb	%bl, %al			/* 6 U pipe */
+		jnz	LookupLoop			/* 6 V pipe */
+		movb	(%esi,%ecx), %ah
+		cmpb	%bh, %ah
+		jnz	LookupLoop
+		movl	window(%esp), %eax
+		movw	(%eax,%ecx), %ax
+		cmpw	scanstart(%esp), %ax
+		jnz	LookupLoop
+
+/* Store the current value of chainlen.					*/
+
+		movl	%ebx, chainlenscanend(%esp)
+
+/* Point %edi to the string under scrutiny, and %esi to the string we	*/
+/* are hoping to match it up with. In actuality, %esi and %edi are	*/
+/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is	*/
+/* initialized to -(MAX_MATCH_8 - scanalign).				*/
+
+		movl	window(%esp), %esi
+		movl	scan(%esp), %edi
+		addl	%ecx, %esi
+		movl	scanalign(%esp), %eax
+		movl	$(-MAX_MATCH_8), %edx
+		lea	MAX_MATCH_8(%edi,%eax), %edi
+		lea	MAX_MATCH_8(%esi,%eax), %esi
+
+/* Test the strings for equality, 8 bytes at a time. At the end,
+ * adjust %edx so that it is offset to the exact byte that mismatched.
+ *
+ * We already know at this point that the first three bytes of the
+ * strings match each other, and they can be safely passed over before
+ * starting the compare loop. So what this code does is skip over 0-3
+ * bytes, as much as necessary in order to dword-align the %edi
+ * pointer. (%esi will still be misaligned three times out of four.)
+ *
+ * It should be confessed that this loop usually does not represent
+ * much of the total running time. Replacing it with a more
+ * straightforward "rep cmpsb" would not drastically degrade
+ * performance.
+ */
+LoopCmps:
+		movl	(%esi,%edx), %eax
+		movl	(%edi,%edx), %ebx
+		xorl	%ebx, %eax
+		jnz	LeaveLoopCmps
+		movl	4(%esi,%edx), %eax
+		movl	4(%edi,%edx), %ebx
+		xorl	%ebx, %eax
+		jnz	LeaveLoopCmps4
+		addl	$8, %edx
+		jnz	LoopCmps
+		jmp	LenMaximum
+LeaveLoopCmps4:	addl	$4, %edx
+LeaveLoopCmps:	testl	$0x0000FFFF, %eax
+		jnz	LenLower
+		addl	$2, %edx
+		shrl	$16, %eax
+LenLower:	subb	$1, %al
+		adcl	$0, %edx
+
+/* Calculate the length of the match. If it is longer than MAX_MATCH,	*/
+/* then automatically accept it as the best possible match and leave.	*/
+
+		lea	(%edi,%edx), %eax
+		movl	scan(%esp), %edi
+		subl	%edi, %eax
+		cmpl	$MAX_MATCH, %eax
+		jge	LenMaximum
+
+/* If the length of the match is not longer than the best match we	*/
+/* have so far, then forget it and return to the lookup loop.		*/
+
+		movl	deflatestate(%esp), %edx
+		movl	bestlen(%esp), %ebx
+		cmpl	%ebx, %eax
+		jg	LongerMatch
+		movl	chainlenscanend(%esp), %ebx
+		movl	windowbestlen(%esp), %esi
+		movl	dsPrev(%edx), %edi
+		movl	wmask(%esp), %edx
+		andl	%ecx, %edx
+		jmp	LookupLoop
+
+/*         s->match_start = cur_match;					*/
+/*         best_len = len;						*/
+/*         if (len >= nice_match) break;				*/
+/*         scan_end = *(ushf*)(scan+best_len-1);			*/
+
+LongerMatch:	movl	nicematch(%esp), %ebx
+		movl	%eax, bestlen(%esp)
+		movl	%ecx, dsMatchStart(%edx)
+		cmpl	%ebx, %eax
+		jge	LeaveNow
+		movl	window(%esp), %esi
+		addl	%eax, %esi
+		movl	%esi, windowbestlen(%esp)
+		movl	chainlenscanend(%esp), %ebx
+		movw	-1(%edi,%eax), %bx
+		movl	dsPrev(%edx), %edi
+		movl	%ebx, chainlenscanend(%esp)
+		movl	wmask(%esp), %edx
+		andl	%ecx, %edx
+		jmp	LookupLoop
+
+/* Accept the current string, with the maximum possible length.		*/
+
+LenMaximum:	movl	deflatestate(%esp), %edx
+		movl	$MAX_MATCH, bestlen(%esp)
+		movl	%ecx, dsMatchStart(%edx)
+
+/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len;		*/
+/* return s->lookahead;							*/
+
+LeaveNow:
+		movl	deflatestate(%esp), %edx
+		movl	bestlen(%esp), %ebx
+		movl	dsLookahead(%edx), %eax
+		cmpl	%eax, %ebx
+		jg	LookaheadRet
+		movl	%ebx, %eax
+LookaheadRet:
+
+/* Restore the stack and return from whence we came.			*/
+
+		addl	$LocalVarsSize, %esp
+		popl	%ebx
+		popl	%esi
+		popl	%edi
+		popl	%ebp
+match_init:	ret

contrib/asm686/README.686

@@ -0,0 +1,34 @@
+This is a patched version of zlib, modified to use
+Pentium-Pro-optimized assembly code in the deflation algorithm. The
+files changed/added by this patch are:
+
+README.686
+match.S
+
+The speedup that this patch provides varies, depending on whether the
+compiler used to build the original version of zlib falls afoul of the
+PPro's speed traps. My own tests show a speedup of around 10-20% at
+the default compression level, and 20-30% using -9, against a version
+compiled using gcc 2.7.2.3. Your mileage may vary.
+
+Note that this code has been tailored for the PPro/PII in particular,
+and will not perform particuarly well on a Pentium.
+
+If you are using an assembler other than GNU as, you will have to
+translate match.S to use your assembler's syntax. (Have fun.)
+
+Brian Raiter
+breadbox@muppetlabs.com
+April, 1998
+
+
+Added for zlib 1.1.3:
+
+The patches come from
+http://www.muppetlabs.com/~breadbox/software/assembly.html
+
+To compile zlib with this asm file, copy match.S to the zlib directory
+then do:
+
+CFLAGS="-O3 -DASMV" ./configure
+make OBJA=match.o

contrib/asm686/match.S

@@ -0,0 +1,327 @@
+/* match.s -- Pentium-Pro-optimized version of longest_match()
+ * Written for zlib 1.1.2
+ * Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License.
+ */
+
+#ifndef NO_UNDERLINE
+#define	match_init	_match_init
+#define	longest_match	_longest_match
+#endif
+
+#define	MAX_MATCH	(258)
+#define	MIN_MATCH	(3)
+#define	MIN_LOOKAHEAD	(MAX_MATCH + MIN_MATCH + 1)
+#define	MAX_MATCH_8	((MAX_MATCH + 7) & ~7)
+
+/* stack frame offsets */
+
+#define	chainlenwmask		0	/* high word: current chain len	*/
+					/* low word: s->wmask		*/
+#define	window			4	/* local copy of s->window	*/
+#define	windowbestlen		8	/* s->window + bestlen		*/
+#define	scanstart		16	/* first two bytes of string	*/
+#define	scanend			12	/* last two bytes of string	*/
+#define	scanalign		20	/* dword-misalignment of string	*/
+#define	nicematch		24	/* a good enough match size	*/
+#define	bestlen			28	/* size of best match so far	*/
+#define	scan			32	/* ptr to string wanting match	*/
+
+#define	LocalVarsSize		(36)
+/*	saved ebx		36 */
+/*	saved edi		40 */
+/*	saved esi		44 */
+/*	saved ebp		48 */
+/*	return address		52 */
+#define	deflatestate		56	/* the function arguments	*/
+#define	curmatch		60
+
+/* Offsets for fields in the deflate_state structure. These numbers
+ * are calculated from the definition of deflate_state, with the
+ * assumption that the compiler will dword-align the fields. (Thus,
+ * changing the definition of deflate_state could easily cause this
+ * program to crash horribly, without so much as a warning at
+ * compile time. Sigh.)
+ */
+#define	dsWSize			36
+#define	dsWMask			44
+#define	dsWindow		48
+#define	dsPrev			56
+#define	dsMatchLen		88
+#define	dsPrevMatch		92
+#define	dsStrStart		100
+#define	dsMatchStart		104
+#define	dsLookahead		108
+#define	dsPrevLen		112
+#define	dsMaxChainLen		116
+#define	dsGoodMatch		132
+#define	dsNiceMatch		136
+
+
+.file "match.S"
+
+.globl	match_init, longest_match
+
+.text
+
+/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
+
+longest_match:
+
+/* Save registers that the compiler may be using, and adjust %esp to	*/
+/* make room for our stack frame.					*/
+
+		pushl	%ebp
+		pushl	%edi
+		pushl	%esi
+		pushl	%ebx
+		subl	$LocalVarsSize, %esp
+
+/* Retrieve the function arguments. %ecx will hold cur_match		*/
+/* throughout the entire function. %edx will hold the pointer to the	*/
+/* deflate_state structure during the function's setup (before		*/
+/* entering the main loop).						*/
+
+		movl	deflatestate(%esp), %edx
+		movl	curmatch(%esp), %ecx
+
+/* uInt wmask = s->w_mask;						*/
+/* unsigned chain_length = s->max_chain_length;				*/
+/* if (s->prev_length >= s->good_match) {				*/
+/*     chain_length >>= 2;						*/
+/* }									*/
+
+		movl	dsPrevLen(%edx), %eax
+		movl	dsGoodMatch(%edx), %ebx
+		cmpl	%ebx, %eax
+		movl	dsWMask(%edx), %eax
+		movl	dsMaxChainLen(%edx), %ebx
+		jl	LastMatchGood
+		shrl	$2, %ebx
+LastMatchGood:
+
+/* chainlen is decremented once beforehand so that the function can	*/
+/* use the sign flag instead of the zero flag for the exit test.	*/
+/* It is then shifted into the high word, to make room for the wmask	*/
+/* value, which it will always accompany.				*/
+
+		decl	%ebx
+		shll	$16, %ebx
+		orl	%eax, %ebx
+		movl	%ebx, chainlenwmask(%esp)
+
+/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;	*/
+
+		movl	dsNiceMatch(%edx), %eax
+		movl	dsLookahead(%edx), %ebx
+		cmpl	%eax, %ebx
+		jl	LookaheadLess
+		movl	%eax, %ebx
+LookaheadLess:	movl	%ebx, nicematch(%esp)
+
+/* register Bytef *scan = s->window + s->strstart;			*/
+
+		movl	dsWindow(%edx), %esi
+		movl	%esi, window(%esp)
+		movl	dsStrStart(%edx), %ebp
+		lea	(%esi,%ebp), %edi
+		movl	%edi, scan(%esp)
+
+/* Determine how many bytes the scan ptr is off from being		*/
+/* dword-aligned.							*/
+
+		movl	%edi, %eax
+		negl	%eax
+		andl	$3, %eax
+		movl	%eax, scanalign(%esp)
+
+/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ?			*/
+/*     s->strstart - (IPos)MAX_DIST(s) : NIL;				*/
+
+		movl	dsWSize(%edx), %eax
+		subl	$MIN_LOOKAHEAD, %eax
+		subl	%eax, %ebp
+		jg	LimitPositive
+		xorl	%ebp, %ebp
+LimitPositive:
+
+/* int best_len = s->prev_length;					*/
+
+		movl	dsPrevLen(%edx), %eax
+		movl	%eax, bestlen(%esp)
+
+/* Store the sum of s->window + best_len in %esi locally, and in %esi.	*/
+
+		addl	%eax, %esi
+		movl	%esi, windowbestlen(%esp)
+
+/* register ush scan_start = *(ushf*)scan;				*/
+/* register ush scan_end   = *(ushf*)(scan+best_len-1);			*/
+/* Posf *prev = s->prev;						*/
+
+		movzwl	(%edi), %ebx
+		movl	%ebx, scanstart(%esp)
+		movzwl	-1(%edi,%eax), %ebx
+		movl	%ebx, scanend(%esp)
+		movl	dsPrev(%edx), %edi
+
+/* Jump into the main loop.						*/
+
+		movl	chainlenwmask(%esp), %edx
+		jmp	LoopEntry
+
+.balign 16
+
+/* do {
+ *     match = s->window + cur_match;
+ *     if (*(ushf*)(match+best_len-1) != scan_end ||
+ *         *(ushf*)match != scan_start) continue;
+ *     [...]
+ * } while ((cur_match = prev[cur_match & wmask]) > limit
+ *          && --chain_length != 0);
+ *
+ * Here is the inner loop of the function. The function will spend the
+ * majority of its time in this loop, and majority of that time will
+ * be spent in the first ten instructions.
+ *
+ * Within this loop:
+ * %ebx = scanend
+ * %ecx = curmatch
+ * %edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
+ * %esi = windowbestlen - i.e., (window + bestlen)
+ * %edi = prev
+ * %ebp = limit
+ */
+LookupLoop:
+		andl	%edx, %ecx
+		movzwl	(%edi,%ecx,2), %ecx
+		cmpl	%ebp, %ecx
+		jbe	LeaveNow
+		subl	$0x00010000, %edx
+		js	LeaveNow
+LoopEntry:	movzwl	-1(%esi,%ecx), %eax
+		cmpl	%ebx, %eax
+		jnz	LookupLoop
+		movl	window(%esp), %eax
+		movzwl	(%eax,%ecx), %eax
+		cmpl	scanstart(%esp), %eax
+		jnz	LookupLoop
+
+/* Store the current value of chainlen.					*/
+
+		movl	%edx, chainlenwmask(%esp)
+
+/* Point %edi to the string under scrutiny, and %esi to the string we	*/
+/* are hoping to match it up with. In actuality, %esi and %edi are	*/
+/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is	*/
+/* initialized to -(MAX_MATCH_8 - scanalign).				*/
+
+		movl	window(%esp), %esi
+		movl	scan(%esp), %edi
+		addl	%ecx, %esi
+		movl	scanalign(%esp), %eax
+		movl	$(-MAX_MATCH_8), %edx
+		lea	MAX_MATCH_8(%edi,%eax), %edi
+		lea	MAX_MATCH_8(%esi,%eax), %esi
+
+/* Test the strings for equality, 8 bytes at a time. At the end,
+ * adjust %edx so that it is offset to the exact byte that mismatched.
+ *
+ * We already know at this point that the first three bytes of the
+ * strings match each other, and they can be safely passed over before
+ * starting the compare loop. So what this code does is skip over 0-3
+ * bytes, as much as necessary in order to dword-align the %edi
+ * pointer. (%esi will still be misaligned three times out of four.)
+ *
+ * It should be confessed that this loop usually does not represent
+ * much of the total running time. Replacing it with a more
+ * straightforward "rep cmpsb" would not drastically degrade
+ * performance.
+ */
+LoopCmps:
+		movl	(%esi,%edx), %eax
+		xorl	(%edi,%edx), %eax
+		jnz	LeaveLoopCmps
+		movl	4(%esi,%edx), %eax
+		xorl	4(%edi,%edx), %eax
+		jnz	LeaveLoopCmps4
+		addl	$8, %edx
+		jnz	LoopCmps
+		jmp	LenMaximum
+LeaveLoopCmps4:	addl	$4, %edx
+LeaveLoopCmps:	testl	$0x0000FFFF, %eax
+		jnz	LenLower
+		addl	$2, %edx
+		shrl	$16, %eax
+LenLower:	subb	$1, %al
+		adcl	$0, %edx
+
+/* Calculate the length of the match. If it is longer than MAX_MATCH,	*/
+/* then automatically accept it as the best possible match and leave.	*/
+
+		lea	(%edi,%edx), %eax
+		movl	scan(%esp), %edi
+		subl	%edi, %eax
+		cmpl	$MAX_MATCH, %eax
+		jge	LenMaximum
+
+/* If the length of the match is not longer than the best match we	*/
+/* have so far, then forget it and return to the lookup loop.		*/
+
+		movl	deflatestate(%esp), %edx
+		movl	bestlen(%esp), %ebx
+		cmpl	%ebx, %eax
+		jg	LongerMatch
+		movl	windowbestlen(%esp), %esi
+		movl	dsPrev(%edx), %edi
+		movl	scanend(%esp), %ebx
+		movl	chainlenwmask(%esp), %edx
+		jmp	LookupLoop
+
+/*         s->match_start = cur_match;					*/
+/*         best_len = len;						*/
+/*         if (len >= nice_match) break;				*/
+/*         scan_end = *(ushf*)(scan+best_len-1);			*/
+
+LongerMatch:	movl	nicematch(%esp), %ebx
+		movl	%eax, bestlen(%esp)
+		movl	%ecx, dsMatchStart(%edx)
+		cmpl	%ebx, %eax
+		jge	LeaveNow
+		movl	window(%esp), %esi
+		addl	%eax, %esi
+		movl	%esi, windowbestlen(%esp)
+		movzwl	-1(%edi,%eax), %ebx
+		movl	dsPrev(%edx), %edi
+		movl	%ebx, scanend(%esp)
+		movl	chainlenwmask(%esp), %edx
+		jmp	LookupLoop
+
+/* Accept the current string, with the maximum possible length.		*/
+
+LenMaximum:	movl	deflatestate(%esp), %edx
+		movl	$MAX_MATCH, bestlen(%esp)
+		movl	%ecx, dsMatchStart(%edx)
+
+/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len;		*/
+/* return s->lookahead;							*/
+
+LeaveNow:
+		movl	deflatestate(%esp), %edx
+		movl	bestlen(%esp), %ebx
+		movl	dsLookahead(%edx), %eax
+		cmpl	%eax, %ebx
+		jg	LookaheadRet
+		movl	%ebx, %eax
+LookaheadRet:
+
+/* Restore the stack and return from whence we came.			*/
+
+		addl	$LocalVarsSize, %esp
+		popl	%ebx
+		popl	%esi
+		popl	%edi
+		popl	%ebp
+match_init:	ret

contrib/delphi/zlib.mak

@@ -0,0 +1,36 @@
+# Makefile for zlib32bd.lib
+# ------------- Borland C++ 4.5 -------------
+
+# The (32-bit) zlib32bd.lib made with this makefile is intended for use 
+# in making the (32-bit) DLL, png32bd.dll. It uses the "stdcall" calling 
+# convention.
+
+CFLAGS= -ps -O2 -C -K -N- -k- -d -3 -r- -w-par -w-aus -WDE
+CC=f:\bc45\bin\bcc32
+LIBFLAGS= /C
+LIB=f:\bc45\bin\tlib
+ZLIB=zlib32bd.lib
+
+.autodepend
+.c.obj:
+        $(CC) -c $(CFLAGS) $<
+
+OBJ1=adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infblock.obj 
+OBJ2=infcodes.obj inflate.obj inftrees.obj infutil.obj inffast.obj 
+OBJ3=trees.obj uncompr.obj zutil.obj
+pOBJ1=+adler32.obj+compress.obj+crc32.obj+deflate.obj+gzio.obj+infblock.obj 
+pOBJ2=+infcodes.obj+inflate.obj+inftrees.obj+infutil.obj+inffast.obj 
+pOBJ3=+trees.obj+uncompr.obj+zutil.obj
+
+all: $(ZLIB)
+
+$(ZLIB): $(OBJ1) $(OBJ2) $(OBJ3)
+        @if exist $@ del $@
+        $(LIB) @&&|
+$@ $(LIBFLAGS) &
+$(pOBJ1) &
+$(pOBJ2) &
+$(pOBJ3)
+|
+
+# End of makefile for zlib32bd.lib

contrib/delphi/zlibdef.pas

@@ -0,0 +1,169 @@
+unit zlibdef;
+
+interface
+
+uses
+  Windows;
+
+const
+  ZLIB_VERSION = '1.1.3';
+
+type
+  voidpf = Pointer;
+  int    = Integer;
+  uInt   = Cardinal;
+  pBytef = PChar;
+  uLong  = Cardinal;
+
+  alloc_func = function(opaque: voidpf; items, size: uInt): voidpf;
+                    stdcall;
+  free_func  = procedure(opaque, address: voidpf);
+                    stdcall;
+
+  internal_state = Pointer;
+
+  z_streamp = ^z_stream;
+  z_stream = packed record
+    next_in: pBytef;          // next input byte
+    avail_in: uInt;           // number of bytes available at next_in
+    total_in: uLong;          // total nb of input bytes read so far
+
+    next_out: pBytef;         // next output byte should be put there
+    avail_out: uInt;          // remaining free space at next_out
+    total_out: uLong;         // total nb of bytes output so far
+
+    msg: PChar;               // last error message, NULL if no error
+    state: internal_state;    // not visible by applications
+
+    zalloc: alloc_func;       // used to allocate the internal state
+    zfree: free_func;         // used to free the internal state
+    opaque: voidpf;           // private data object passed to zalloc and zfree
+
+    data_type: int;           // best guess about the data type: ascii or binary
+    adler: uLong;             // adler32 value of the uncompressed data
+    reserved: uLong;          // reserved for future use
+    end;
+
+const
+  Z_NO_FLUSH      = 0;
+  Z_SYNC_FLUSH    = 2;
+  Z_FULL_FLUSH    = 3;
+  Z_FINISH        = 4;
+
+  Z_OK            = 0;
+  Z_STREAM_END    = 1;
+
+  Z_NO_COMPRESSION         =  0;
+  Z_BEST_SPEED             =  1;
+  Z_BEST_COMPRESSION       =  9;
+  Z_DEFAULT_COMPRESSION    = -1;
+
+  Z_FILTERED            = 1;
+  Z_HUFFMAN_ONLY        = 2;
+  Z_DEFAULT_STRATEGY    = 0;
+
+  Z_BINARY   = 0;
+  Z_ASCII    = 1;
+  Z_UNKNOWN  = 2;
+
+  Z_DEFLATED    = 8;
+
+  MAX_MEM_LEVEL = 9;
+
+function adler32(adler: uLong; const buf: pBytef; len: uInt): uLong;
+             stdcall;
+function crc32(crc: uLong; const buf: pBytef; len: uInt): uLong;
+             stdcall;
+function deflate(strm: z_streamp; flush: int): int;
+             stdcall;
+function deflateCopy(dest, source: z_streamp): int;
+             stdcall;
+function deflateEnd(strm: z_streamp): int;
+             stdcall;
+function deflateInit2_(strm: z_streamp; level, method,
+                       windowBits, memLevel, strategy: int;
+                       const version: PChar; stream_size: int): int;
+             stdcall;
+function deflateInit_(strm: z_streamp; level: int;
+                      const version: PChar; stream_size: int): int;
+             stdcall;
+function deflateParams(strm: z_streamp; level, strategy: int): int;
+             stdcall;
+function deflateReset(strm: z_streamp): int;
+             stdcall;
+function deflateSetDictionary(strm: z_streamp;
+                              const dictionary: pBytef;
+                              dictLength: uInt): int;
+             stdcall;
+function inflate(strm: z_streamp; flush: int): int;
+             stdcall;
+function inflateEnd(strm: z_streamp): int;
+             stdcall;
+function inflateInit2_(strm: z_streamp; windowBits: int;
+                       const version: PChar; stream_size: int): int;
+             stdcall;
+function inflateInit_(strm: z_streamp; const version: PChar;
+                      stream_size: int): int;
+             stdcall;
+function inflateReset(strm: z_streamp): int;
+             stdcall;
+function inflateSetDictionary(strm: z_streamp;
+                              const dictionary: pBytef;
+                              dictLength: uInt): int;
+             stdcall;
+function inflateSync(strm: z_streamp): int;
+             stdcall;
+
+function deflateInit(strm: z_streamp; level: int): int;
+function deflateInit2(strm: z_streamp; level, method, windowBits,
+                      memLevel, strategy: int): int;
+function inflateInit(strm: z_streamp): int;
+function inflateInit2(strm: z_streamp; windowBits: int): int;
+
+implementation
+
+function deflateInit(strm: z_streamp; level: int): int;
+begin
+  Result := deflateInit_(strm, level, ZLIB_VERSION, sizeof(z_stream));
+end;
+
+function deflateInit2(strm: z_streamp; level, method, windowBits,
+                      memLevel, strategy: int): int;
+begin
+  Result := deflateInit2_(strm, level, method, windowBits, memLevel,
+                          strategy, ZLIB_VERSION, sizeof(z_stream));
+end;
+
+function inflateInit(strm: z_streamp): int;
+begin
+  Result := inflateInit_(strm, ZLIB_VERSION, sizeof(z_stream));
+end;
+
+function inflateInit2(strm: z_streamp; windowBits: int): int;
+begin
+  Result := inflateInit2_(strm, windowBits, ZLIB_VERSION,
+                          sizeof(z_stream));
+end;
+
+const
+  zlibDLL = 'png32bd.dll';
+
+function adler32; external zlibDLL;
+function crc32; external zlibDLL;
+function deflate; external zlibDLL;
+function deflateCopy; external zlibDLL;
+function deflateEnd; external zlibDLL;
+function deflateInit2_; external zlibDLL;
+function deflateInit_; external zlibDLL;
+function deflateParams; external zlibDLL;
+function deflateReset; external zlibDLL;
+function deflateSetDictionary; external zlibDLL;
+function inflate; external zlibDLL;
+function inflateEnd; external zlibDLL;
+function inflateInit2_; external zlibDLL;
+function inflateInit_; external zlibDLL;
+function inflateReset; external zlibDLL;
+function inflateSetDictionary; external zlibDLL;
+function inflateSync; external zlibDLL;
+
+end.

contrib/delphi2/d_zlib.bpr

@@ -0,0 +1,224 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.03
+# ---------------------------------------------------------------------------
+PROJECT = d_zlib.lib
+OBJFILES = d_zlib.obj adler32.obj deflate.obj infblock.obj infcodes.obj inffast.obj \
+  inflate.obj inftrees.obj infutil.obj trees.obj
+RESFILES =
+RESDEPEN = $(RESFILES)
+LIBFILES =
+LIBRARIES = VCL35.lib
+SPARELIBS = VCL35.lib
+DEFFILE =
+PACKAGES = VCLX35.bpi VCL35.bpi VCLDB35.bpi VCLDBX35.bpi ibsmp35.bpi bcbsmp35.bpi \
+  dclocx35.bpi QRPT35.bpi TEEUI35.bpi TEEDB35.bpi TEE35.bpi DSS35.bpi \
+  NMFAST35.bpi INETDB35.bpi INET35.bpi VCLMID35.bpi
+# ---------------------------------------------------------------------------
+PATHCPP = .;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+# ---------------------------------------------------------------------------
+CFLAG1 = -O2 -Ve -d -k- -vi
+CFLAG2 = -I$(BCB)\include;$(BCB)\include\vcl -H=$(BCB)\lib\vcl35.csm
+CFLAG3 = -ff -pr -5
+PFLAGS = -U;$(DEBUGLIBPATH) -I$(BCB)\include;$(BCB)\include\vcl -H -W -$I- -v -JPHN -M
+RFLAGS = -i$(BCB)\include;$(BCB)\include\vcl 
+AFLAGS = /i$(BCB)\include /i$(BCB)\include\vcl /mx /w2 /zn
+LFLAGS =
+IFLAGS = -g -Gn
+# ---------------------------------------------------------------------------
+ALLOBJ = c0w32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cp32mt.lib
+# ---------------------------------------------------------------------------
+!!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=2
+Item0=$(BCB)\include
+Item1=$(BCB)\include;$(BCB)\include\vcl
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib\obj;$(BCB)\lib
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+ ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = TLib
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=2
+Item0=$(BCB)\include;$(BCB)\include\vcl
+Item1=$(BCB)\include
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib\obj;$(BCB)\lib
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) $(IFLAGS) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
+# ---------------------------------------------------------------------------

contrib/delphi2/d_zlib.cpp

@@ -0,0 +1,17 @@
+#include <condefs.h>
+#pragma hdrstop
+//---------------------------------------------------------------------------
+USEUNIT("adler32.c");
+USEUNIT("deflate.c");
+USEUNIT("infblock.c");
+USEUNIT("infcodes.c");
+USEUNIT("inffast.c");
+USEUNIT("inflate.c");
+USEUNIT("inftrees.c");
+USEUNIT("infutil.c");
+USEUNIT("trees.c");
+//---------------------------------------------------------------------------
+#define Library
+
+// To add a file to the library use the Project menu 'Add to Project'.
+

contrib/delphi2/readme.txt

@@ -0,0 +1,17 @@
+These are files used to compile zlib under Borland C++ Builder 3.
+
+zlib.bpg is the main project group that can be loaded in the BCB IDE and
+loads all other *.bpr projects
+
+zlib.bpr is a project used to create a static zlib.lib library with C calling
+convention for functions.
+
+zlib32.bpr creates a zlib32.dll dynamic link library with Windows standard
+calling convention.
+
+d_zlib.bpr creates a set of .obj files with register calling convention.
+These files are used by zlib.pas to create a Delphi unit containing zlib.
+The d_zlib.lib file generated isn't useful and can be deleted.
+
+zlib.cpp, zlib32.cpp and d_zlib.cpp are used by the above projects.
+

contrib/delphi2/zlib.bpg

@@ -0,0 +1,26 @@
+#------------------------------------------------------------------------------
+VERSION = BWS.01
+#------------------------------------------------------------------------------
+!ifndef ROOT
+ROOT = $(MAKEDIR)\..
+!endif
+#------------------------------------------------------------------------------
+MAKE = $(ROOT)\bin\make.exe -$(MAKEFLAGS) -f$**
+DCC = $(ROOT)\bin\dcc32.exe $**
+BRCC = $(ROOT)\bin\brcc32.exe $**
+#------------------------------------------------------------------------------
+PROJECTS = zlib zlib32 d_zlib
+#------------------------------------------------------------------------------
+default: $(PROJECTS)
+#------------------------------------------------------------------------------
+
+zlib: zlib.bpr
+  $(MAKE)
+
+zlib32: zlib32.bpr
+  $(MAKE)
+
+d_zlib: d_zlib.bpr
+  $(MAKE)
+
+

contrib/delphi2/zlib.bpr

@@ -0,0 +1,225 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.03
+# ---------------------------------------------------------------------------
+PROJECT = zlib.lib
+OBJFILES = zlib.obj adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infblock.obj \
+  infcodes.obj inffast.obj inflate.obj inftrees.obj infutil.obj trees.obj \
+  uncompr.obj zutil.obj
+RESFILES =
+RESDEPEN = $(RESFILES)
+LIBFILES =
+LIBRARIES = VCL35.lib
+SPARELIBS = VCL35.lib
+DEFFILE =
+PACKAGES = VCLX35.bpi VCL35.bpi VCLDB35.bpi VCLDBX35.bpi ibsmp35.bpi bcbsmp35.bpi \
+  dclocx35.bpi QRPT35.bpi TEEUI35.bpi TEEDB35.bpi TEE35.bpi DSS35.bpi \
+  NMFAST35.bpi INETDB35.bpi INET35.bpi VCLMID35.bpi
+# ---------------------------------------------------------------------------
+PATHCPP = .;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+# ---------------------------------------------------------------------------
+CFLAG1 = -O2 -Ve -d -k- -vi
+CFLAG2 = -I$(BCB)\include;$(BCB)\include\vcl -H=$(BCB)\lib\vcl35.csm
+CFLAG3 = -ff -5
+PFLAGS = -U;$(DEBUGLIBPATH) -I$(BCB)\include;$(BCB)\include\vcl -H -W -$I- -v -JPHN -M
+RFLAGS = -i$(BCB)\include;$(BCB)\include\vcl 
+AFLAGS = /i$(BCB)\include /i$(BCB)\include\vcl /mx /w2 /zn
+LFLAGS =
+IFLAGS = -g -Gn
+# ---------------------------------------------------------------------------
+ALLOBJ = c0w32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cp32mt.lib
+# ---------------------------------------------------------------------------
+!!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=2
+Item0=$(BCB)\include
+Item1=$(BCB)\include;$(BCB)\include\vcl
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib\obj;$(BCB)\lib
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+ ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = TLib
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=2
+Item0=$(BCB)\include;$(BCB)\include\vcl
+Item1=$(BCB)\include
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib\obj;$(BCB)\lib
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) $(IFLAGS) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
+# ---------------------------------------------------------------------------

contrib/delphi2/zlib.cpp

@@ -0,0 +1,22 @@
+#include <condefs.h>
+#pragma hdrstop
+//---------------------------------------------------------------------------
+USEUNIT("adler32.c");
+USEUNIT("compress.c");
+USEUNIT("crc32.c");
+USEUNIT("deflate.c");
+USEUNIT("gzio.c");
+USEUNIT("infblock.c");
+USEUNIT("infcodes.c");
+USEUNIT("inffast.c");
+USEUNIT("inflate.c");
+USEUNIT("inftrees.c");
+USEUNIT("infutil.c");
+USEUNIT("trees.c");
+USEUNIT("uncompr.c");
+USEUNIT("zutil.c");
+//---------------------------------------------------------------------------
+#define Library
+
+// To add a file to the library use the Project menu 'Add to Project'.
+

contrib/delphi2/zlib.pas

@@ -0,0 +1,534 @@
+{*******************************************************}
+{                                                       }
+{       Delphi Supplemental Components                  }
+{       ZLIB Data Compression Interface Unit            }
+{                                                       }
+{       Copyright (c) 1997 Borland International        }
+{                                                       }
+{*******************************************************}
+
+{ Modified for zlib 1.1.3 by Davide Moretti <dave@rimini.com }
+
+unit zlib;
+
+interface
+
+uses Sysutils, Classes;
+
+type
+  TAlloc = function (AppData: Pointer; Items, Size: Integer): Pointer;
+  TFree = procedure (AppData, Block: Pointer);
+
+  // Internal structure.  Ignore.
+  TZStreamRec = packed record
+    next_in: PChar;       // next input byte
+    avail_in: Integer;    // number of bytes available at next_in
+    total_in: Integer;    // total nb of input bytes read so far
+
+    next_out: PChar;      // next output byte should be put here
+    avail_out: Integer;   // remaining free space at next_out
+    total_out: Integer;   // total nb of bytes output so far
+
+    msg: PChar;           // last error message, NULL if no error
+    internal: Pointer;    // not visible by applications
+
+    zalloc: TAlloc;       // used to allocate the internal state
+    zfree: TFree;         // used to free the internal state
+    AppData: Pointer;     // private data object passed to zalloc and zfree
+
+    data_type: Integer;   //  best guess about the data type: ascii or binary
+    adler: Integer;       // adler32 value of the uncompressed data
+    reserved: Integer;    // reserved for future use
+  end;
+
+  // Abstract ancestor class
+  TCustomZlibStream = class(TStream)
+  private
+    FStrm: TStream;
+    FStrmPos: Integer;
+    FOnProgress: TNotifyEvent;
+    FZRec: TZStreamRec;
+    FBuffer: array [Word] of Char;
+  protected
+    procedure Progress(Sender: TObject); dynamic;
+    property OnProgress: TNotifyEvent read FOnProgress write FOnProgress;
+    constructor Create(Strm: TStream);
+  end;
+
+{ TCompressionStream compresses data on the fly as data is written to it, and
+  stores the compressed data to another stream.
+
+  TCompressionStream is write-only and strictly sequential. Reading from the
+  stream will raise an exception. Using Seek to move the stream pointer
+  will raise an exception.
+
+  Output data is cached internally, written to the output stream only when
+  the internal output buffer is full.  All pending output data is flushed
+  when the stream is destroyed.
+
+  The Position property returns the number of uncompressed bytes of
+  data that have been written to the stream so far.
+
+  CompressionRate returns the on-the-fly percentage by which the original
+  data has been compressed:  (1 - (CompressedBytes / UncompressedBytes)) * 100
+  If raw data size = 100 and compressed data size = 25, the CompressionRate
+  is 75%
+
+  The OnProgress event is called each time the output buffer is filled and
+  written to the output stream.  This is useful for updating a progress
+  indicator when you are writing a large chunk of data to the compression
+  stream in a single call.}
+
+
+  TCompressionLevel = (clNone, clFastest, clDefault, clMax);
+
+  TCompressionStream = class(TCustomZlibStream)
+  private
+    function GetCompressionRate: Single;
+  public
+    constructor Create(CompressionLevel: TCompressionLevel; Dest: TStream);
+    destructor Destroy; override;
+    function Read(var Buffer; Count: Longint): Longint; override;
+    function Write(const Buffer; Count: Longint): Longint; override;
+    function Seek(Offset: Longint; Origin: Word): Longint; override;
+    property CompressionRate: Single read GetCompressionRate;
+    property OnProgress;
+  end;
+
+{ TDecompressionStream decompresses data on the fly as data is read from it.
+
+  Compressed data comes from a separate source stream.  TDecompressionStream
+  is read-only and unidirectional; you can seek forward in the stream, but not
+  backwards.  The special case of setting the stream position to zero is
+  allowed.  Seeking forward decompresses data until the requested position in
+  the uncompressed data has been reached.  Seeking backwards, seeking relative
+  to the end of the stream, requesting the size of the stream, and writing to
+  the stream will raise an exception.
+
+  The Position property returns the number of bytes of uncompressed data that
+  have been read from the stream so far.
+
+  The OnProgress event is called each time the internal input buffer of
+  compressed data is exhausted and the next block is read from the input stream.
+  This is useful for updating a progress indicator when you are reading a
+  large chunk of data from the decompression stream in a single call.}
+
+  TDecompressionStream = class(TCustomZlibStream)
+  public
+    constructor Create(Source: TStream);
+    destructor Destroy; override;
+    function Read(var Buffer; Count: Longint): Longint; override;
+    function Write(const Buffer; Count: Longint): Longint; override;
+    function Seek(Offset: Longint; Origin: Word): Longint; override;
+    property OnProgress;
+  end;
+
+
+
+{ CompressBuf compresses data, buffer to buffer, in one call.
+   In: InBuf = ptr to compressed data
+       InBytes = number of bytes in InBuf
+  Out: OutBuf = ptr to newly allocated buffer containing decompressed data
+       OutBytes = number of bytes in OutBuf   }
+procedure CompressBuf(const InBuf: Pointer; InBytes: Integer;
+                      out OutBuf: Pointer; out OutBytes: Integer);
+
+
+{ DecompressBuf decompresses data, buffer to buffer, in one call.
+   In: InBuf = ptr to compressed data
+       InBytes = number of bytes in InBuf
+       OutEstimate = zero, or est. size of the decompressed data
+  Out: OutBuf = ptr to newly allocated buffer containing decompressed data
+       OutBytes = number of bytes in OutBuf   }
+procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer;
+ OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer);
+
+const
+  zlib_version = '1.1.3';
+
+type
+  EZlibError = class(Exception);
+  ECompressionError = class(EZlibError);
+  EDecompressionError = class(EZlibError);
+
+function adler32(adler: Integer; buf: PChar; len: Integer): Integer;
+
+implementation
+
+const
+  Z_NO_FLUSH      = 0;
+  Z_PARTIAL_FLUSH = 1;
+  Z_SYNC_FLUSH    = 2;
+  Z_FULL_FLUSH    = 3;
+  Z_FINISH        = 4;
+
+  Z_OK            = 0;
+  Z_STREAM_END    = 1;
+  Z_NEED_DICT     = 2;
+  Z_ERRNO         = (-1);
+  Z_STREAM_ERROR  = (-2);
+  Z_DATA_ERROR    = (-3);
+  Z_MEM_ERROR     = (-4);
+  Z_BUF_ERROR     = (-5);
+  Z_VERSION_ERROR = (-6);
+
+  Z_NO_COMPRESSION       =   0;
+  Z_BEST_SPEED           =   1;
+  Z_BEST_COMPRESSION     =   9;
+  Z_DEFAULT_COMPRESSION  = (-1);
+
+  Z_FILTERED            = 1;
+  Z_HUFFMAN_ONLY        = 2;
+  Z_DEFAULT_STRATEGY    = 0;
+
+  Z_BINARY   = 0;
+  Z_ASCII    = 1;
+  Z_UNKNOWN  = 2;
+
+  Z_DEFLATED = 8;
+
+  _z_errmsg: array[0..9] of PChar = (
+    'need dictionary',      // Z_NEED_DICT      (2)
+    'stream end',           // Z_STREAM_END     (1)
+    '',                     // Z_OK             (0)
+    'file error',           // Z_ERRNO          (-1)
+    'stream error',         // Z_STREAM_ERROR   (-2)
+    'data error',           // Z_DATA_ERROR     (-3)
+    'insufficient memory',  // Z_MEM_ERROR      (-4)
+    'buffer error',         // Z_BUF_ERROR      (-5)
+    'incompatible version', // Z_VERSION_ERROR  (-6)
+    ''
+  );
+
+{$L deflate.obj}
+{$L inflate.obj}
+{$L inftrees.obj}
+{$L trees.obj}
+{$L adler32.obj}
+{$L infblock.obj}
+{$L infcodes.obj}
+{$L infutil.obj}
+{$L inffast.obj}
+
+procedure _tr_init; external;
+procedure _tr_tally; external;
+procedure _tr_flush_block; external;
+procedure _tr_align; external;
+procedure _tr_stored_block; external;
+function adler32; external;
+procedure inflate_blocks_new; external;
+procedure inflate_blocks; external;
+procedure inflate_blocks_reset; external;
+procedure inflate_blocks_free; external;
+procedure inflate_set_dictionary; external;
+procedure inflate_trees_bits; external;
+procedure inflate_trees_dynamic; external;
+procedure inflate_trees_fixed; external;
+procedure inflate_codes_new; external;
+procedure inflate_codes; external;
+procedure inflate_codes_free; external;
+procedure _inflate_mask; external;
+procedure inflate_flush; external;
+procedure inflate_fast; external;
+
+procedure _memset(P: Pointer; B: Byte; count: Integer);cdecl;
+begin
+  FillChar(P^, count, B);
+end;
+
+procedure _memcpy(dest, source: Pointer; count: Integer);cdecl;
+begin
+  Move(source^, dest^, count);
+end;
+
+
+
+// deflate compresses data
+function deflateInit_(var strm: TZStreamRec; level: Integer; version: PChar;
+  recsize: Integer): Integer; external;
+function deflate(var strm: TZStreamRec; flush: Integer): Integer; external;
+function deflateEnd(var strm: TZStreamRec): Integer; external;
+
+// inflate decompresses data
+function inflateInit_(var strm: TZStreamRec; version: PChar;
+  recsize: Integer): Integer; external;
+function inflate(var strm: TZStreamRec; flush: Integer): Integer; external;
+function inflateEnd(var strm: TZStreamRec): Integer; external;
+function inflateReset(var strm: TZStreamRec): Integer; external;
+
+
+function zcalloc(AppData: Pointer; Items, Size: Integer): Pointer;
+begin
+  GetMem(Result, Items*Size);
+end;
+
+procedure zcfree(AppData, Block: Pointer);
+begin
+  FreeMem(Block);
+end;
+
+function zlibCheck(code: Integer): Integer;
+begin
+  Result := code;
+  if code < 0 then
+    raise EZlibError.Create('error');    //!!
+end;
+
+function CCheck(code: Integer): Integer;
+begin
+  Result := code;
+  if code < 0 then
+    raise ECompressionError.Create('error'); //!!
+end;
+
+function DCheck(code: Integer): Integer;
+begin
+  Result := code;
+  if code < 0 then
+    raise EDecompressionError.Create('error');  //!!
+end;
+
+procedure CompressBuf(const InBuf: Pointer; InBytes: Integer;
+                      out OutBuf: Pointer; out OutBytes: Integer);
+var
+  strm: TZStreamRec;
+  P: Pointer;
+begin
+  FillChar(strm, sizeof(strm), 0);
+  OutBytes := ((InBytes + (InBytes div 10) + 12) + 255) and not 255;
+  GetMem(OutBuf, OutBytes);
+  try
+    strm.next_in := InBuf;
+    strm.avail_in := InBytes;
+    strm.next_out := OutBuf;
+    strm.avail_out := OutBytes;
+    CCheck(deflateInit_(strm, Z_BEST_COMPRESSION, zlib_version, sizeof(strm)));
+    try
+      while CCheck(deflate(strm, Z_FINISH)) <> Z_STREAM_END do
+      begin
+        P := OutBuf;
+        Inc(OutBytes, 256);
+        ReallocMem(OutBuf, OutBytes);
+        strm.next_out := PChar(Integer(OutBuf) + (Integer(strm.next_out) - Integer(P)));
+        strm.avail_out := 256;
+      end;
+    finally
+      CCheck(deflateEnd(strm));
+    end;
+    ReallocMem(OutBuf, strm.total_out);
+    OutBytes := strm.total_out;
+  except
+    FreeMem(OutBuf);
+    raise
+  end;
+end;
+
+
+procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer;
+  OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer);
+var
+  strm: TZStreamRec;
+  P: Pointer;
+  BufInc: Integer;
+begin
+  FillChar(strm, sizeof(strm), 0);
+  BufInc := (InBytes + 255) and not 255;
+  if OutEstimate = 0 then
+    OutBytes := BufInc
+  else
+    OutBytes := OutEstimate;
+  GetMem(OutBuf, OutBytes);
+  try
+    strm.next_in := InBuf;
+    strm.avail_in := InBytes;
+    strm.next_out := OutBuf;
+    strm.avail_out := OutBytes;
+    DCheck(inflateInit_(strm, zlib_version, sizeof(strm)));
+    try
+      while DCheck(inflate(strm, Z_FINISH)) <> Z_STREAM_END do
+      begin
+        P := OutBuf;
+        Inc(OutBytes, BufInc);
+        ReallocMem(OutBuf, OutBytes);
+        strm.next_out := PChar(Integer(OutBuf) + (Integer(strm.next_out) - Integer(P)));
+        strm.avail_out := BufInc;
+      end;
+    finally
+      DCheck(inflateEnd(strm));
+    end;
+    ReallocMem(OutBuf, strm.total_out);
+    OutBytes := strm.total_out;
+  except
+    FreeMem(OutBuf);
+    raise
+  end;
+end;
+
+
+// TCustomZlibStream
+
+constructor TCustomZLibStream.Create(Strm: TStream);
+begin
+  inherited Create;
+  FStrm := Strm;
+  FStrmPos := Strm.Position;
+end;
+
+procedure TCustomZLibStream.Progress(Sender: TObject);
+begin
+  if Assigned(FOnProgress) then FOnProgress(Sender);
+end;
+
+
+// TCompressionStream
+
+constructor TCompressionStream.Create(CompressionLevel: TCompressionLevel;
+  Dest: TStream);
+const
+  Levels: array [TCompressionLevel] of ShortInt =
+    (Z_NO_COMPRESSION, Z_BEST_SPEED, Z_DEFAULT_COMPRESSION, Z_BEST_COMPRESSION);
+begin
+  inherited Create(Dest);
+  FZRec.next_out := FBuffer;
+  FZRec.avail_out := sizeof(FBuffer);
+  CCheck(deflateInit_(FZRec, Levels[CompressionLevel], zlib_version, sizeof(FZRec)));
+end;
+
+destructor TCompressionStream.Destroy;
+begin
+  FZRec.next_in := nil;
+  FZRec.avail_in := 0;
+  try
+    if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
+    while (CCheck(deflate(FZRec, Z_FINISH)) <> Z_STREAM_END)
+      and (FZRec.avail_out = 0) do
+    begin
+      FStrm.WriteBuffer(FBuffer, sizeof(FBuffer));
+      FZRec.next_out := FBuffer;
+      FZRec.avail_out := sizeof(FBuffer);
+    end;
+    if FZRec.avail_out < sizeof(FBuffer) then
+      FStrm.WriteBuffer(FBuffer, sizeof(FBuffer) - FZRec.avail_out);
+  finally
+    deflateEnd(FZRec);
+  end;
+  inherited Destroy;
+end;
+
+function TCompressionStream.Read(var Buffer; Count: Longint): Longint;
+begin
+  raise ECompressionError.Create('Invalid stream operation');
+end;
+
+function TCompressionStream.Write(const Buffer; Count: Longint): Longint;
+begin
+  FZRec.next_in := @Buffer;
+  FZRec.avail_in := Count;
+  if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
+  while (FZRec.avail_in > 0) do
+  begin
+    CCheck(deflate(FZRec, 0));
+    if FZRec.avail_out = 0 then
+    begin
+      FStrm.WriteBuffer(FBuffer, sizeof(FBuffer));
+      FZRec.next_out := FBuffer;
+      FZRec.avail_out := sizeof(FBuffer);
+      FStrmPos := FStrm.Position;
+      Progress(Self);
+    end;
+  end;
+  Result := Count;
+end;
+
+function TCompressionStream.Seek(Offset: Longint; Origin: Word): Longint;
+begin
+  if (Offset = 0) and (Origin = soFromCurrent) then
+    Result := FZRec.total_in
+  else
+    raise ECompressionError.Create('Invalid stream operation');
+end;
+
+function TCompressionStream.GetCompressionRate: Single;
+begin
+  if FZRec.total_in = 0 then
+    Result := 0
+  else
+    Result := (1.0 - (FZRec.total_out / FZRec.total_in)) * 100.0;
+end;
+
+
+// TDecompressionStream
+
+constructor TDecompressionStream.Create(Source: TStream);
+begin
+  inherited Create(Source);
+  FZRec.next_in := FBuffer;
+  FZRec.avail_in := 0;
+  DCheck(inflateInit_(FZRec, zlib_version, sizeof(FZRec)));
+end;
+
+destructor TDecompressionStream.Destroy;
+begin
+  inflateEnd(FZRec);
+  inherited Destroy;
+end;
+
+function TDecompressionStream.Read(var Buffer; Count: Longint): Longint;
+begin
+  FZRec.next_out := @Buffer;
+  FZRec.avail_out := Count;
+  if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
+  while (FZRec.avail_out > 0) do
+  begin
+    if FZRec.avail_in = 0 then
+    begin
+      FZRec.avail_in := FStrm.Read(FBuffer, sizeof(FBuffer));
+      if FZRec.avail_in = 0 then
+        begin
+          Result := Count - FZRec.avail_out;
+          Exit;
+        end;
+      FZRec.next_in := FBuffer;
+      FStrmPos := FStrm.Position;
+      Progress(Self);
+    end;
+    DCheck(inflate(FZRec, 0));
+  end;
+  Result := Count;
+end;
+
+function TDecompressionStream.Write(const Buffer; Count: Longint): Longint;
+begin
+  raise EDecompressionError.Create('Invalid stream operation');
+end;
+
+function TDecompressionStream.Seek(Offset: Longint; Origin: Word): Longint;
+var
+  I: Integer;
+  Buf: array [0..4095] of Char;
+begin
+  if (Offset = 0) and (Origin = soFromBeginning) then
+  begin
+    DCheck(inflateReset(FZRec));
+    FZRec.next_in := FBuffer;
+    FZRec.avail_in := 0;
+    FStrm.Position := 0;
+    FStrmPos := 0;
+  end
+  else if ( (Offset >= 0) and (Origin = soFromCurrent)) or
+          ( ((Offset - FZRec.total_out) > 0) and (Origin = soFromBeginning)) then
+  begin
+    if Origin = soFromBeginning then Dec(Offset, FZRec.total_out);
+    if Offset > 0 then
+    begin
+      for I := 1 to Offset div sizeof(Buf) do
+        ReadBuffer(Buf, sizeof(Buf));
+      ReadBuffer(Buf, Offset mod sizeof(Buf));
+    end;
+  end
+  else
+    raise EDecompressionError.Create('Invalid stream operation');
+  Result := FZRec.total_out;
+end;
+
+end.

contrib/delphi2/zlib32.bpr

@@ -0,0 +1,174 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.03
+# ---------------------------------------------------------------------------
+PROJECT = zlib32.dll
+OBJFILES = zlib32.obj adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infblock.obj \
+  infcodes.obj inffast.obj inflate.obj inftrees.obj infutil.obj trees.obj \
+  uncompr.obj zutil.obj
+RESFILES =
+RESDEPEN = $(RESFILES)
+LIBFILES =
+LIBRARIES = 
+SPARELIBS = 
+DEFFILE =
+PACKAGES = VCLX35.bpi VCL35.bpi VCLDB35.bpi VCLDBX35.bpi ibsmp35.bpi bcbsmp35.bpi \
+  dclocx35.bpi QRPT35.bpi TEEUI35.bpi TEEDB35.bpi TEE35.bpi DSS35.bpi \
+  NMFAST35.bpi INETDB35.bpi INET35.bpi VCLMID35.bpi
+# ---------------------------------------------------------------------------
+PATHCPP = .;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+# ---------------------------------------------------------------------------
+CFLAG1 = -WD -O2 -Ve -d -k- -vi -c -tWD
+CFLAG2 = -D_NO_VCL;ZLIB_DLL -I$(BCB)\include
+CFLAG3 = -ff -5
+PFLAGS = -D_NO_VCL;ZLIB_DLL -U$(BCB)\lib;$(RELEASELIBPATH) -I$(BCB)\include -$I- -v \
+  -JPHN -M
+RFLAGS = -D_NO_VCL;ZLIB_DLL -i$(BCB)\include
+AFLAGS = /i$(BCB)\include /d_NO_VCL /dZLIB_DLL /mx /w2 /zn
+LFLAGS = -L$(BCB)\lib;$(RELEASELIBPATH) -aa -Tpd -x -Gi
+IFLAGS = -Gn -g
+# ---------------------------------------------------------------------------
+ALLOBJ = c0d32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES)  import32.lib cw32mt.lib
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=1
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=DLL (GUI)
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=1
+Item0=$(BCB)\include
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib
+
+[HistoryLists\hlConditionals]
+Count=1
+Item0=_NO_VCL;ZLIB_DLL
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) $(IFLAGS) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
+# ---------------------------------------------------------------------------

contrib/delphi2/zlib32.cpp

@@ -0,0 +1,42 @@
+
+#include <windows.h>
+#pragma hdrstop
+#include <condefs.h>
+
+
+//---------------------------------------------------------------------------
+//   Important note about DLL memory management in a VCL DLL:
+//
+//
+//
+// If your DLL uses VCL and exports any functions that pass VCL String objects
+// (or structs/classes containing nested Strings) as parameter or function
+// results, you will need to build both your DLL project and any EXE projects
+// that use your DLL with the dynamic RTL (the RTL DLL).  This will change your
+// DLL and its calling EXE's to use BORLNDMM.DLL as their memory manager. In
+// these cases, the file BORLNDMM.DLL should be deployed along with your DLL
+// and the RTL DLL (CP3240MT.DLL). To avoid the requiring BORLNDMM.DLL in
+// these situations, pass string information using "char *" or ShortString
+// parameters and then link with the static RTL.
+//
+//---------------------------------------------------------------------------
+USEUNIT("adler32.c");
+USEUNIT("compress.c");
+USEUNIT("crc32.c");
+USEUNIT("deflate.c");
+USEUNIT("gzio.c");
+USEUNIT("infblock.c");
+USEUNIT("infcodes.c");
+USEUNIT("inffast.c");
+USEUNIT("inflate.c");
+USEUNIT("inftrees.c");
+USEUNIT("infutil.c");
+USEUNIT("trees.c");
+USEUNIT("uncompr.c");
+USEUNIT("zutil.c");
+//---------------------------------------------------------------------------
+#pragma argsused
+int WINAPI DllEntryPoint(HINSTANCE hinst, unsigned long reason, void*)
+{
+        return 1;
+}

contrib/iostream/test.cpp

@@ -0,0 +1,24 @@
+
+#include "zfstream.h"
+
+int main() {
+
+  // Construct a stream object with this filebuffer.  Anything sent
+  // to this stream will go to standard out.
+  gzofstream os( 1, ios::out );
+
+  // This text is getting compressed and sent to stdout.
+  // To prove this, run 'test | zcat'.
+  os << "Hello, Mommy" << endl;
+
+  os << setcompressionlevel( Z_NO_COMPRESSION );
+  os << "hello, hello, hi, ho!" << endl;
+
+  setcompressionlevel( os, Z_DEFAULT_COMPRESSION )
+    << "I'm compressing again" << endl;
+
+  os.close();
+
+  return 0;
+
+}

contrib/iostream/zfstream.cpp

@@ -0,0 +1,329 @@
+
+#include <memory.h>
+#include "zfstream.h"
+
+gzfilebuf::gzfilebuf() :
+  file(NULL),
+  mode(0),
+  own_file_descriptor(0)
+{ }
+
+gzfilebuf::~gzfilebuf() {
+
+  sync();
+  if ( own_file_descriptor )
+    close();
+
+}
+
+gzfilebuf *gzfilebuf::open( const char *name,
+			    int io_mode ) {
+
+  if ( is_open() )
+    return NULL;
+
+  char char_mode[10];
+  char *p;
+  memset(char_mode,'\0',10);
+  p = char_mode;
+
+  if ( io_mode & ios::in ) {
+    mode = ios::in;
+    *p++ = 'r';
+  } else if ( io_mode & ios::app ) {
+    mode = ios::app;
+    *p++ = 'a';
+  } else {
+    mode = ios::out;
+    *p++ = 'w';
+  }
+
+  if ( io_mode & ios::binary ) {
+    mode |= ios::binary;
+    *p++ = 'b';
+  }
+
+  // Hard code the compression level
+  if ( io_mode & (ios::out|ios::app )) {
+    *p++ = '9';
+  }
+
+  if ( (file = gzopen(name, char_mode)) == NULL )
+    return NULL;
+
+  own_file_descriptor = 1;
+
+  return this;
+
+}
+
+gzfilebuf *gzfilebuf::attach( int file_descriptor,
+			      int io_mode ) {
+
+  if ( is_open() )
+    return NULL;
+
+  char char_mode[10];
+  char *p;
+  memset(char_mode,'\0',10);
+  p = char_mode;
+
+  if ( io_mode & ios::in ) {
+    mode = ios::in;
+    *p++ = 'r';
+  } else if ( io_mode & ios::app ) {
+    mode = ios::app;
+    *p++ = 'a';
+  } else {
+    mode = ios::out;
+    *p++ = 'w';
+  }
+
+  if ( io_mode & ios::binary ) {
+    mode |= ios::binary;
+    *p++ = 'b';
+  }
+
+  // Hard code the compression level
+  if ( io_mode & (ios::out|ios::app )) {
+    *p++ = '9';
+  }
+
+  if ( (file = gzdopen(file_descriptor, char_mode)) == NULL )
+    return NULL;
+
+  own_file_descriptor = 0;
+
+  return this;
+
+}
+
+gzfilebuf *gzfilebuf::close() {
+
+  if ( is_open() ) {
+
+    sync();
+    gzclose( file );
+    file = NULL;
+
+  }
+
+  return this;
+
+}
+
+int gzfilebuf::setcompressionlevel( short comp_level ) {
+
+  return gzsetparams(file, comp_level, -2);
+
+}
+
+int gzfilebuf::setcompressionstrategy( short comp_strategy ) {
+
+  return gzsetparams(file, -2, comp_strategy);
+
+}
+
+
+streampos gzfilebuf::seekoff( streamoff off, ios::seek_dir dir, int which ) {
+
+  return streampos(EOF);
+
+}
+
+int gzfilebuf::underflow() {
+
+  // If the file hasn't been opened for reading, error.
+  if ( !is_open() || !(mode & ios::in) )
+    return EOF;
+
+  // if a buffer doesn't exists, allocate one.
+  if ( !base() ) {
+
+    if ( (allocate()) == EOF )
+      return EOF;
+    setp(0,0);
+
+  } else {
+
+    if ( in_avail() )
+      return (unsigned char) *gptr();
+
+    if ( out_waiting() ) {
+      if ( flushbuf() == EOF )
+	return EOF;
+    }
+
+  }
+
+  // Attempt to fill the buffer.
+
+  int result = fillbuf();
+  if ( result == EOF ) {
+    // disable get area
+    setg(0,0,0);
+    return EOF;
+  }
+
+  return (unsigned char) *gptr();
+
+}
+
+int gzfilebuf::overflow( int c ) {
+
+  if ( !is_open() || !(mode & ios::out) )
+    return EOF;
+
+  if ( !base() ) {
+    if ( allocate() == EOF )
+      return EOF;
+    setg(0,0,0);
+  } else {
+    if (in_avail()) {
+	return EOF;
+    }
+    if (out_waiting()) {
+      if (flushbuf() == EOF)
+	return EOF;
+    }
+  }
+
+  int bl = blen();
+  setp( base(), base() + bl);
+
+  if ( c != EOF ) {
+
+    *pptr() = c;
+    pbump(1);
+
+  }
+
+  return 0;
+
+}
+
+int gzfilebuf::sync() {
+
+  if ( !is_open() )
+    return EOF;
+
+  if ( out_waiting() )
+    return flushbuf();
+
+  return 0;
+
+}
+
+int gzfilebuf::flushbuf() {
+
+  int n;
+  char *q;
+
+  q = pbase();
+  n = pptr() - q;
+
+  if ( gzwrite( file, q, n) < n )
+    return EOF;
+
+  setp(0,0);
+
+  return 0;
+
+}
+
+int gzfilebuf::fillbuf() {
+
+  int required;
+  char *p;
+
+  p = base();
+
+  required = blen();
+
+  int t = gzread( file, p, required );
+
+  if ( t <= 0) return EOF;
+
+  setg( base(), base(), base()+t);
+
+  return t;
+
+}
+
+gzfilestream_common::gzfilestream_common() :
+  ios( gzfilestream_common::rdbuf() )
+{ }
+
+gzfilestream_common::~gzfilestream_common()
+{ }
+
+void gzfilestream_common::attach( int fd, int io_mode ) {
+
+  if ( !buffer.attach( fd, io_mode) )
+    clear( ios::failbit | ios::badbit );
+  else
+    clear();
+
+}
+
+void gzfilestream_common::open( const char *name, int io_mode ) {
+
+  if ( !buffer.open( name, io_mode ) )
+    clear( ios::failbit | ios::badbit );
+  else
+    clear();
+
+}
+
+void gzfilestream_common::close() {
+
+  if ( !buffer.close() )
+    clear( ios::failbit | ios::badbit );
+
+}
+
+gzfilebuf *gzfilestream_common::rdbuf() {
+
+  return &buffer;
+
+}
+     
+gzifstream::gzifstream() :
+  ios( gzfilestream_common::rdbuf() )
+{
+  clear( ios::badbit );
+}
+
+gzifstream::gzifstream( const char *name, int io_mode ) :
+  ios( gzfilestream_common::rdbuf() )
+{
+  gzfilestream_common::open( name, io_mode );
+}
+
+gzifstream::gzifstream( int fd, int io_mode ) :
+  ios( gzfilestream_common::rdbuf() )
+{
+  gzfilestream_common::attach( fd, io_mode );
+}
+
+gzifstream::~gzifstream() { }
+
+gzofstream::gzofstream() :
+  ios( gzfilestream_common::rdbuf() )
+{
+  clear( ios::badbit );
+}
+
+gzofstream::gzofstream( const char *name, int io_mode ) :
+  ios( gzfilestream_common::rdbuf() )
+{
+  gzfilestream_common::open( name, io_mode );
+}
+
+gzofstream::gzofstream( int fd, int io_mode ) :
+  ios( gzfilestream_common::rdbuf() )
+{
+  gzfilestream_common::attach( fd, io_mode );
+}
+
+gzofstream::~gzofstream() { }

contrib/iostream/zfstream.h

@@ -0,0 +1,142 @@
+
+#ifndef _zfstream_h
+#define _zfstream_h
+
+#include <fstream.h>
+#include "zlib.h"
+
+class gzfilebuf : public streambuf {
+
+public:
+
+  gzfilebuf( );
+  virtual ~gzfilebuf();
+
+  gzfilebuf *open( const char *name, int io_mode );
+  gzfilebuf *attach( int file_descriptor, int io_mode );
+  gzfilebuf *close();
+
+  int setcompressionlevel( short comp_level );
+  int setcompressionstrategy( short comp_strategy );
+
+  inline int is_open() const { return (file !=NULL); }
+
+  virtual streampos seekoff( streamoff, ios::seek_dir, int );
+
+  virtual int sync();
+
+protected:
+
+  virtual int underflow();
+  virtual int overflow( int = EOF );
+
+private:
+
+  gzFile file;
+  short mode;
+  short own_file_descriptor;
+
+  int flushbuf();
+  int fillbuf();
+
+};
+
+class gzfilestream_common : virtual public ios {
+
+  friend class gzifstream;
+  friend class gzofstream;
+  friend gzofstream &setcompressionlevel( gzofstream &, int );
+  friend gzofstream &setcompressionstrategy( gzofstream &, int );
+
+public:
+  virtual ~gzfilestream_common();
+
+  void attach( int fd, int io_mode );
+  void open( const char *name, int io_mode );
+  void close();
+
+protected:
+  gzfilestream_common();
+
+private:
+  gzfilebuf *rdbuf();
+
+  gzfilebuf buffer;
+
+};
+
+class gzifstream : public gzfilestream_common, public istream {
+
+public:
+
+  gzifstream();
+  gzifstream( const char *name, int io_mode = ios::in );
+  gzifstream( int fd, int io_mode = ios::in );
+
+  virtual ~gzifstream();
+
+};
+
+class gzofstream : public gzfilestream_common, public ostream {
+
+public:
+
+  gzofstream();
+  gzofstream( const char *name, int io_mode = ios::out );
+  gzofstream( int fd, int io_mode = ios::out );
+
+  virtual ~gzofstream();
+
+};
+
+template<class T> class gzomanip {
+  friend gzofstream &operator<<(gzofstream &, const gzomanip<T> &);
+public:
+  gzomanip(gzofstream &(*f)(gzofstream &, T), T v) : func(f), val(v) { }
+private:
+  gzofstream &(*func)(gzofstream &, T);
+  T val;
+};
+
+template<class T> gzofstream &operator<<(gzofstream &s,
+					 const gzomanip<T> &m) {
+  return (*m.func)(s, m.val);
+  
+}
+
+inline gzofstream &setcompressionlevel( gzofstream &s, int l ) {
+  (s.rdbuf())->setcompressionlevel(l);
+  return s;
+}
+
+inline gzofstream &setcompressionstrategy( gzofstream &s, int l ) {
+  (s.rdbuf())->setcompressionstrategy(l);
+  return s;
+}
+
+inline gzomanip<int> setcompressionlevel(int l)
+{
+  return gzomanip<int>(&setcompressionlevel,l);
+}
+
+inline gzomanip<int> setcompressionstrategy(int l)
+{
+  return gzomanip<int>(&setcompressionstrategy,l);
+}
+
+#endif
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+

contrib/iostream2/zstream.h

@@ -0,0 +1,307 @@
+/*
+ *
+ * Copyright (c) 1997
+ * Christian Michelsen Research AS
+ * Advanced Computing
+ * Fantoftvegen 38, 5036 BERGEN, Norway
+ * http://www.cmr.no
+ *
+ * Permission to use, copy, modify, distribute and sell this software
+ * and its documentation for any purpose is hereby granted without fee,
+ * provided that the above copyright notice appear in all copies and
+ * that both that copyright notice and this permission notice appear
+ * in supporting documentation.  Christian Michelsen Research AS makes no
+ * representations about the suitability of this software for any
+ * purpose.  It is provided "as is" without express or implied warranty.
+ *
+ */
+
+#ifndef ZSTREAM__H
+#define ZSTREAM__H
+
+/*
+ * zstream.h - C++ interface to the 'zlib' general purpose compression library
+ * $Id: zstream.h 1.1 1997-06-25 12:00:56+02 tyge Exp tyge $
+ */
+
+#include <strstream.h>
+#include <string.h>
+#include <stdio.h>
+#include "zlib.h"
+
+#if defined(_WIN32)
+#   include <fcntl.h>
+#   include <io.h>
+#   define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+#   define SET_BINARY_MODE(file)
+#endif
+
+class zstringlen {
+public:
+    zstringlen(class izstream&);
+    zstringlen(class ozstream&, const char*);
+    size_t value() const { return val.word; }
+private:
+    struct Val { unsigned char byte; size_t word; } val;
+};
+
+//  ----------------------------- izstream -----------------------------
+
+class izstream
+{
+    public:
+        izstream() : m_fp(0) {}
+        izstream(FILE* fp) : m_fp(0) { open(fp); }
+        izstream(const char* name) : m_fp(0) { open(name); }
+        ~izstream() { close(); }
+
+        /* Opens a gzip (.gz) file for reading.
+         * open() can be used to read a file which is not in gzip format;
+         * in this case read() will directly read from the file without
+         * decompression. errno can be checked to distinguish two error
+         * cases (if errno is zero, the zlib error is Z_MEM_ERROR).
+         */
+        void open(const char* name) {
+            if (m_fp) close();
+            m_fp = ::gzopen(name, "rb");
+        }
+
+        void open(FILE* fp) {
+            SET_BINARY_MODE(fp);
+            if (m_fp) close();
+            m_fp = ::gzdopen(fileno(fp), "rb");
+        }
+
+        /* Flushes all pending input if necessary, closes the compressed file
+         * and deallocates all the (de)compression state. The return value is
+         * the zlib error number (see function error() below).
+         */
+        int close() {
+            int r = ::gzclose(m_fp);
+            m_fp = 0; return r;
+        }
+
+        /* Binary read the given number of bytes from the compressed file.
+         */
+        int read(void* buf, size_t len) {
+            return ::gzread(m_fp, buf, len);
+        }
+
+        /* Returns the error message for the last error which occurred on the
+         * given compressed file. errnum is set to zlib error number. If an
+         * error occurred in the file system and not in the compression library,
+         * errnum is set to Z_ERRNO and the application may consult errno
+         * to get the exact error code.
+         */
+        const char* error(int* errnum) {
+            return ::gzerror(m_fp, errnum);
+        }
+
+        gzFile fp() { return m_fp; }
+
+    private:
+        gzFile m_fp;
+};
+
+/*
+ * Binary read the given (array of) object(s) from the compressed file.
+ * If the input file was not in gzip format, read() copies the objects number
+ * of bytes into the buffer.
+ * returns the number of uncompressed bytes actually read
+ * (0 for end of file, -1 for error).
+ */
+template <class T, class Items>
+inline int read(izstream& zs, T* x, Items items) {
+    return ::gzread(zs.fp(), x, items*sizeof(T));
+}
+
+/*
+ * Binary input with the '>' operator.
+ */
+template <class T>
+inline izstream& operator>(izstream& zs, T& x) {
+    ::gzread(zs.fp(), &x, sizeof(T));
+    return zs;
+}
+
+
+inline zstringlen::zstringlen(izstream& zs) {
+    zs > val.byte;
+    if (val.byte == 255) zs > val.word;
+    else val.word = val.byte;
+}
+
+/*
+ * Read length of string + the string with the '>' operator.
+ */
+inline izstream& operator>(izstream& zs, char* x) {
+    zstringlen len(zs);
+    ::gzread(zs.fp(), x, len.value());
+    x[len.value()] = '\0';
+    return zs;
+}
+
+inline char* read_string(izstream& zs) {
+    zstringlen len(zs);
+    char* x = new char[len.value()+1];
+    ::gzread(zs.fp(), x, len.value());
+    x[len.value()] = '\0';
+    return x;
+}
+
+// ----------------------------- ozstream -----------------------------
+
+class ozstream
+{
+    public:
+        ozstream() : m_fp(0), m_os(0) {
+        }
+        ozstream(FILE* fp, int level = Z_DEFAULT_COMPRESSION)
+            : m_fp(0), m_os(0) {
+            open(fp, level);
+        }
+        ozstream(const char* name, int level = Z_DEFAULT_COMPRESSION)
+            : m_fp(0), m_os(0) {
+            open(name, level);
+        }
+        ~ozstream() {
+            close();
+        }
+
+        /* Opens a gzip (.gz) file for writing.
+         * The compression level parameter should be in 0..9
+         * errno can be checked to distinguish two error cases
+         * (if errno is zero, the zlib error is Z_MEM_ERROR).
+         */
+        void open(const char* name, int level = Z_DEFAULT_COMPRESSION) {
+            char mode[4] = "wb\0";
+            if (level != Z_DEFAULT_COMPRESSION) mode[2] = '0'+level;
+            if (m_fp) close();
+            m_fp = ::gzopen(name, mode);
+        }
+
+        /* open from a FILE pointer.
+         */
+        void open(FILE* fp, int level = Z_DEFAULT_COMPRESSION) {
+            SET_BINARY_MODE(fp);
+            char mode[4] = "wb\0";
+            if (level != Z_DEFAULT_COMPRESSION) mode[2] = '0'+level;
+            if (m_fp) close();
+            m_fp = ::gzdopen(fileno(fp), mode);
+        }
+
+        /* Flushes all pending output if necessary, closes the compressed file
+         * and deallocates all the (de)compression state. The return value is
+         * the zlib error number (see function error() below).
+         */
+        int close() {
+            if (m_os) {
+                ::gzwrite(m_fp, m_os->str(), m_os->pcount());
+                delete[] m_os->str(); delete m_os; m_os = 0;
+            }
+            int r = ::gzclose(m_fp); m_fp = 0; return r;
+        }
+
+        /* Binary write the given number of bytes into the compressed file.
+         */
+        int write(const void* buf, size_t len) {
+            return ::gzwrite(m_fp, (voidp) buf, len);
+        }
+
+        /* Flushes all pending output into the compressed file. The parameter
+         * _flush is as in the deflate() function. The return value is the zlib
+         * error number (see function gzerror below). flush() returns Z_OK if
+         * the flush_ parameter is Z_FINISH and all output could be flushed.
+         * flush() should be called only when strictly necessary because it can
+         * degrade compression.
+         */
+        int flush(int _flush) {
+            os_flush();
+            return ::gzflush(m_fp, _flush);
+        }
+
+        /* Returns the error message for the last error which occurred on the
+         * given compressed file. errnum is set to zlib error number. If an
+         * error occurred in the file system and not in the compression library,
+         * errnum is set to Z_ERRNO and the application may consult errno
+         * to get the exact error code.
+         */
+        const char* error(int* errnum) {
+            return ::gzerror(m_fp, errnum);
+        }
+
+        gzFile fp() { return m_fp; }
+
+        ostream& os() {
+            if (m_os == 0) m_os = new ostrstream;
+            return *m_os;
+        }
+
+        void os_flush() {
+            if (m_os && m_os->pcount()>0) {
+                ostrstream* oss = new ostrstream;
+                oss->fill(m_os->fill());
+                oss->flags(m_os->flags());
+                oss->precision(m_os->precision());
+                oss->width(m_os->width());
+                ::gzwrite(m_fp, m_os->str(), m_os->pcount());
+                delete[] m_os->str(); delete m_os; m_os = oss;
+            }
+        }
+
+    private:
+        gzFile m_fp;
+        ostrstream* m_os;
+};
+
+/*
+ * Binary write the given (array of) object(s) into the compressed file.
+ * returns the number of uncompressed bytes actually written
+ * (0 in case of error).
+ */
+template <class T, class Items>
+inline int write(ozstream& zs, const T* x, Items items) {
+    return ::gzwrite(zs.fp(), (voidp) x, items*sizeof(T));
+}
+
+/*
+ * Binary output with the '<' operator.
+ */
+template <class T>
+inline ozstream& operator<(ozstream& zs, const T& x) {
+    ::gzwrite(zs.fp(), (voidp) &x, sizeof(T));
+    return zs;
+}
+
+inline zstringlen::zstringlen(ozstream& zs, const char* x) {
+    val.byte = 255;  val.word = ::strlen(x);
+    if (val.word < 255) zs < (val.byte = val.word);
+    else zs < val;
+}
+
+/*
+ * Write length of string + the string with the '<' operator.
+ */
+inline ozstream& operator<(ozstream& zs, const char* x) {
+    zstringlen len(zs, x);
+    ::gzwrite(zs.fp(), (voidp) x, len.value());
+    return zs;
+}
+
+#ifdef _MSC_VER
+inline ozstream& operator<(ozstream& zs, char* const& x) {
+    return zs < (const char*) x;
+}
+#endif
+
+/*
+ * Ascii write with the << operator;
+ */
+template <class T>
+inline ostream& operator<<(ozstream& zs, const T& x) {
+    zs.os_flush();
+    return zs.os() << x;
+}
+
+#endif

contrib/iostream2/zstream_test.cpp

@@ -0,0 +1,25 @@
+#include "zstream.h"
+#include <math.h>
+#include <stdlib.h>
+#include <iomanip.h>
+
+void main() {
+	char h[256] = "Hello";
+	char* g = "Goodbye";
+	ozstream out("temp.gz");
+    out < "This works well" < h < g;
+    out.close();
+
+    izstream in("temp.gz"); // read it back
+    char *x = read_string(in), *y = new char[256], z[256];
+    in > y > z;
+    in.close();
+    cout << x << endl << y << endl << z << endl;
+
+    out.open("temp.gz"); // try ascii output; zcat temp.gz to see the results
+    out << setw(50) << setfill('#') << setprecision(20) << x << endl << y << endl << z << endl;
+    out << z << endl << y << endl << x << endl;
+    out << 1.1234567890123456789 << endl;
+
+    delete[] x; delete[] y;
+}

contrib/minizip/ChangeLogUnzip

@@ -0,0 +1,38 @@
+Change in 0.15: (19 Mar 98)
+- fix memory leak in minizip.c
+
+Change in 0.14: (10 Mar 98)
+- fix bugs in minizip.c sample for zipping big file
+- fix problem in month in date handling
+- fix bug in unzlocal_GetCurrentFileInfoInternal in unzip.c for 
+    comment handling
+
+Change in 0.13: (6 Mar 98)
+- fix bugs in zip.c
+- add real minizip sample
+
+Change in 0.12: (4 Mar 98)
+- add zip.c and zip.h for creates .zip file
+- fix change_file_date in miniunz.c for Unix (Jean-loup Gailly)
+- fix miniunz.c for file without specific record for directory
+
+Change in 0.11: (3 Mar 98)
+- fix bug in unzGetCurrentFileInfo for get extra field and comment
+- enhance miniunz sample, remove the bad unztst.c sample
+
+Change in 0.10: (2 Mar 98)
+- fix bug in unzReadCurrentFile
+- rename unzip* to unz* function and structure
+- remove Windows-like hungary notation variable name
+- modify some structure in unzip.h
+- add somes comment in source
+- remove unzipGetcCurrentFile function
+- replace ZUNZEXPORT by ZEXPORT
+- add unzGetLocalExtrafield for get the local extrafield info
+- add a new sample, miniunz.c
+
+Change in 0.4: (25 Feb 98)
+- suppress the type unzipFileInZip. 
+  Only on file in the zipfile can be open at the same time
+- fix somes typo in code
+- added tm_unz structure in unzip_file_info (date/time in readable format)

contrib/minizip/Makefile

@@ -0,0 +1,25 @@
+CC=cc
+CFLAGS=-O -I../..
+
+UNZ_OBJS = miniunz.o unzip.o ../../libz.a
+ZIP_OBJS = minizip.o zip.o   ../../libz.a
+
+.c.o:
+	$(CC) -c $(CFLAGS) $*.c
+
+all: miniunz minizip
+
+miniunz:  $(UNZ_OBJS)
+	$(CC) $(CFLAGS) -o $@ $(UNZ_OBJS)
+
+minizip:  $(ZIP_OBJS)
+	$(CC) $(CFLAGS) -o $@ $(ZIP_OBJS)
+
+test:	miniunz minizip
+	./minizip test readme.txt
+	./miniunz -l test.zip
+	mv readme.txt readme.old
+	./miniunz test.zip
+
+clean:
+	/bin/rm -f *.o *~ minizip miniunz

contrib/minizip/miniunz.c

@@ -0,0 +1,508 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <errno.h>
+#include <fcntl.h>
+
+#ifdef unix
+# include <unistd.h>
+# include <utime.h>
+#else
+# include <direct.h>
+# include <io.h>
+#endif
+
+#include "unzip.h"
+
+#define CASESENSITIVITY (0)
+#define WRITEBUFFERSIZE (8192)
+
+/*
+  mini unzip, demo of unzip package
+
+  usage :
+  Usage : miniunz [-exvlo] file.zip [file_to_extract]
+
+  list the file in the zipfile, and print the content of FILE_ID.ZIP or README.TXT
+    if it exists
+*/
+
+
+/* change_file_date : change the date/time of a file
+    filename : the filename of the file where date/time must be modified
+    dosdate : the new date at the MSDos format (4 bytes)
+    tmu_date : the SAME new date at the tm_unz format */
+void change_file_date(filename,dosdate,tmu_date)
+	const char *filename;
+	uLong dosdate;
+	tm_unz tmu_date;
+{
+#ifdef WIN32
+  HANDLE hFile;
+  FILETIME ftm,ftLocal,ftCreate,ftLastAcc,ftLastWrite;
+
+  hFile = CreateFile(filename,GENERIC_READ | GENERIC_WRITE,
+                      0,NULL,OPEN_EXISTING,0,NULL);
+  GetFileTime(hFile,&ftCreate,&ftLastAcc,&ftLastWrite);
+  DosDateTimeToFileTime((WORD)(dosdate>>16),(WORD)dosdate,&ftLocal);
+  LocalFileTimeToFileTime(&ftLocal,&ftm);
+  SetFileTime(hFile,&ftm,&ftLastAcc,&ftm);
+  CloseHandle(hFile);
+#else
+#ifdef unix
+  struct utimbuf ut;
+  struct tm newdate;
+  newdate.tm_sec = tmu_date.tm_sec;
+  newdate.tm_min=tmu_date.tm_min;
+  newdate.tm_hour=tmu_date.tm_hour;
+  newdate.tm_mday=tmu_date.tm_mday;
+  newdate.tm_mon=tmu_date.tm_mon;
+  if (tmu_date.tm_year > 1900)
+      newdate.tm_year=tmu_date.tm_year - 1900;
+  else
+      newdate.tm_year=tmu_date.tm_year ;
+  newdate.tm_isdst=-1;
+
+  ut.actime=ut.modtime=mktime(&newdate);
+  utime(filename,&ut);
+#endif
+#endif
+}
+
+
+/* mymkdir and change_file_date are not 100 % portable
+   As I don't know well Unix, I wait feedback for the unix portion */
+
+int mymkdir(dirname)
+	const char* dirname;
+{
+    int ret=0;
+#ifdef WIN32
+	ret = mkdir(dirname);
+#else
+#ifdef unix
+	ret = mkdir (dirname,0775);
+#endif
+#endif
+	return ret;
+}
+
+int makedir (newdir)
+    char *newdir;
+{
+  char *buffer ;
+  char *p;
+  int  len = strlen(newdir);  
+
+  if (len <= 0) 
+    return 0;
+
+  buffer = (char*)malloc(len+1);
+  strcpy(buffer,newdir);
+  
+  if (buffer[len-1] == '/') {
+    buffer[len-1] = '\0';
+  }
+  if (mymkdir(buffer) == 0)
+    {
+      free(buffer);
+      return 1;
+    }
+
+  p = buffer+1;
+  while (1)
+    {
+      char hold;
+
+      while(*p && *p != '\\' && *p != '/')
+        p++;
+      hold = *p;
+      *p = 0;
+      if ((mymkdir(buffer) == -1) && (errno == ENOENT))
+        {
+          printf("couldn't create directory %s\n",buffer);
+          free(buffer);
+          return 0;
+        }
+      if (hold == 0)
+        break;
+      *p++ = hold;
+    }
+  free(buffer);
+  return 1;
+}
+
+void do_banner()
+{
+	printf("MiniUnz 0.15, demo of zLib + Unz package written by Gilles Vollant\n");
+	printf("more info at http://wwww.winimage/zLibDll/unzip.htm\n\n");
+}
+
+void do_help()
+{	
+	printf("Usage : miniunz [-exvlo] file.zip [file_to_extract]\n\n") ;
+}
+
+
+int do_list(uf)
+	unzFile uf;
+{
+	uLong i;
+	unz_global_info gi;
+	int err;
+
+	err = unzGetGlobalInfo (uf,&gi);
+	if (err!=UNZ_OK)
+		printf("error %d with zipfile in unzGetGlobalInfo \n",err);
+    printf(" Length  Method   Size  Ratio   Date    Time   CRC-32     Name\n");
+    printf(" ------  ------   ----  -----   ----    ----   ------     ----\n");
+	for (i=0;i<gi.number_entry;i++)
+	{
+		char filename_inzip[256];
+		unz_file_info file_info;
+		uLong ratio=0;
+		const char *string_method;
+		err = unzGetCurrentFileInfo(uf,&file_info,filename_inzip,sizeof(filename_inzip),NULL,0,NULL,0);
+		if (err!=UNZ_OK)
+		{
+			printf("error %d with zipfile in unzGetCurrentFileInfo\n",err);
+			break;
+		}
+		if (file_info.uncompressed_size>0)
+			ratio = (file_info.compressed_size*100)/file_info.uncompressed_size;
+
+		if (file_info.compression_method==0)
+			string_method="Stored";
+		else
+		if (file_info.compression_method==Z_DEFLATED)
+		{
+			uInt iLevel=(uInt)((file_info.flag & 0x6)/2);
+			if (iLevel==0)
+			  string_method="Defl:N";
+			else if (iLevel==1)
+			  string_method="Defl:X";
+			else if ((iLevel==2) || (iLevel==3))
+			  string_method="Defl:F"; /* 2:fast , 3 : extra fast*/
+		}
+		else
+			string_method="Unkn. ";
+
+		printf("%7lu  %6s %7lu %3lu%%  %2.2lu-%2.2lu-%2.2lu  %2.2lu:%2.2lu  %8.8lx   %s\n",
+			    file_info.uncompressed_size,string_method,file_info.compressed_size,
+				ratio,
+				(uLong)file_info.tmu_date.tm_mon + 1,
+                (uLong)file_info.tmu_date.tm_mday,
+				(uLong)file_info.tmu_date.tm_year % 100,
+				(uLong)file_info.tmu_date.tm_hour,(uLong)file_info.tmu_date.tm_min,
+				(uLong)file_info.crc,filename_inzip);
+		if ((i+1)<gi.number_entry)
+		{
+			err = unzGoToNextFile(uf);
+			if (err!=UNZ_OK)
+			{
+				printf("error %d with zipfile in unzGoToNextFile\n",err);
+				break;
+			}
+		}
+	}
+
+	return 0;
+}
+
+
+int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite)
+	unzFile uf;
+	const int* popt_extract_without_path;
+    int* popt_overwrite;
+{
+	char filename_inzip[256];
+	char* filename_withoutpath;
+	char* p;
+    int err=UNZ_OK;
+    FILE *fout=NULL;
+    void* buf;
+    uInt size_buf;
+	
+	unz_file_info file_info;
+	uLong ratio=0;
+	err = unzGetCurrentFileInfo(uf,&file_info,filename_inzip,sizeof(filename_inzip),NULL,0,NULL,0);
+
+	if (err!=UNZ_OK)
+	{
+		printf("error %d with zipfile in unzGetCurrentFileInfo\n",err);
+		return err;
+	}
+
+    size_buf = WRITEBUFFERSIZE;
+    buf = (void*)malloc(size_buf);
+    if (buf==NULL)
+    {
+        printf("Error allocating memory\n");
+        return UNZ_INTERNALERROR;
+    }
+
+	p = filename_withoutpath = filename_inzip;
+	while ((*p) != '\0')
+	{
+		if (((*p)=='/') || ((*p)=='\\'))
+			filename_withoutpath = p+1;
+		p++;
+	}
+
+	if ((*filename_withoutpath)=='\0')
+	{
+		if ((*popt_extract_without_path)==0)
+		{
+			printf("creating directory: %s\n",filename_inzip);
+			mymkdir(filename_inzip);
+		}
+	}
+	else
+	{
+		const char* write_filename;
+		int skip=0;
+
+		if ((*popt_extract_without_path)==0)
+			write_filename = filename_inzip;
+		else
+			write_filename = filename_withoutpath;
+
+		err = unzOpenCurrentFile(uf);
+		if (err!=UNZ_OK)
+		{
+			printf("error %d with zipfile in unzOpenCurrentFile\n",err);
+		}
+
+		if (((*popt_overwrite)==0) && (err==UNZ_OK))
+		{
+			char rep;
+			FILE* ftestexist;
+			ftestexist = fopen(write_filename,"rb");
+			if (ftestexist!=NULL)
+			{
+				fclose(ftestexist);
+				do
+				{
+					char answer[128];
+					printf("The file %s exist. Overwrite ? [y]es, [n]o, [A]ll: ",write_filename);
+					scanf("%1s",answer);
+					rep = answer[0] ;
+					if ((rep>='a') && (rep<='z'))
+						rep -= 0x20;
+				}
+				while ((rep!='Y') && (rep!='N') && (rep!='A'));
+			}
+
+			if (rep == 'N')
+				skip = 1;
+
+			if (rep == 'A')
+				*popt_overwrite=1;
+		}
+
+		if ((skip==0) && (err==UNZ_OK))
+		{
+			fout=fopen(write_filename,"wb");
+
+            /* some zipfile don't contain directory alone before file */
+            if ((fout==NULL) && ((*popt_extract_without_path)==0) && 
+                                (filename_withoutpath!=(char*)filename_inzip))
+            {
+                char c=*(filename_withoutpath-1);
+                *(filename_withoutpath-1)='\0';
+                makedir(write_filename);
+                *(filename_withoutpath-1)=c;
+                fout=fopen(write_filename,"wb");
+            }
+
+			if (fout==NULL)
+			{
+				printf("error opening %s\n",write_filename);
+			}
+		}
+
+		if (fout!=NULL)
+		{
+			printf(" extracting: %s\n",write_filename);
+
+			do
+			{
+				err = unzReadCurrentFile(uf,buf,size_buf);
+				if (err<0)	
+				{
+					printf("error %d with zipfile in unzReadCurrentFile\n",err);
+					break;
+				}
+				if (err>0)
+					if (fwrite(buf,err,1,fout)!=1)
+					{
+						printf("error in writing extracted file\n");
+                        err=UNZ_ERRNO;
+						break;
+					}
+			}
+			while (err>0);
+			fclose(fout);
+			if (err==0) 
+				change_file_date(write_filename,file_info.dosDate,
+					             file_info.tmu_date);
+		}
+
+        if (err==UNZ_OK)
+        {
+		    err = unzCloseCurrentFile (uf);
+		    if (err!=UNZ_OK)
+		    {
+			    printf("error %d with zipfile in unzCloseCurrentFile\n",err);
+		    }
+        }
+        else
+            unzCloseCurrentFile(uf); /* don't lose the error */       
+	}
+
+    free(buf);    
+    return err;
+}
+
+
+int do_extract(uf,opt_extract_without_path,opt_overwrite)
+	unzFile uf;
+	int opt_extract_without_path;
+    int opt_overwrite;
+{
+	uLong i;
+	unz_global_info gi;
+	int err;
+	FILE* fout=NULL;	
+
+	err = unzGetGlobalInfo (uf,&gi);
+	if (err!=UNZ_OK)
+		printf("error %d with zipfile in unzGetGlobalInfo \n",err);
+
+	for (i=0;i<gi.number_entry;i++)
+	{
+        if (do_extract_currentfile(uf,&opt_extract_without_path,
+                                      &opt_overwrite) != UNZ_OK)
+            break;
+
+		if ((i+1)<gi.number_entry)
+		{
+			err = unzGoToNextFile(uf);
+			if (err!=UNZ_OK)
+			{
+				printf("error %d with zipfile in unzGoToNextFile\n",err);
+				break;
+			}
+		}
+	}
+
+	return 0;
+}
+
+int do_extract_onefile(uf,filename,opt_extract_without_path,opt_overwrite)
+	unzFile uf;
+	const char* filename;
+	int opt_extract_without_path;
+    int opt_overwrite;
+{
+    int err = UNZ_OK;
+    if (unzLocateFile(uf,filename,CASESENSITIVITY)!=UNZ_OK)
+    {
+        printf("file %s not found in the zipfile\n",filename);
+        return 2;
+    }
+
+    if (do_extract_currentfile(uf,&opt_extract_without_path,
+                                      &opt_overwrite) == UNZ_OK)
+        return 0;
+    else
+        return 1;
+}
+
+
+int main(argc,argv)
+	int argc;
+	char *argv[];
+{
+	const char *zipfilename=NULL;
+    const char *filename_to_extract=NULL;
+	int i;
+	int opt_do_list=0;
+	int opt_do_extract=1;
+	int opt_do_extract_withoutpath=0;
+	int opt_overwrite=0;
+	char filename_try[512];
+	unzFile uf=NULL;
+
+	do_banner();
+	if (argc==1)
+	{
+		do_help();
+		exit(0);
+	}
+	else
+	{
+		for (i=1;i<argc;i++)
+		{
+			if ((*argv[i])=='-')
+			{
+				const char *p=argv[i]+1;
+				
+				while ((*p)!='\0')
+				{			
+					char c=*(p++);;
+					if ((c=='l') || (c=='L'))
+						opt_do_list = 1;
+					if ((c=='v') || (c=='V'))
+						opt_do_list = 1;
+					if ((c=='x') || (c=='X'))
+						opt_do_extract = 1;
+					if ((c=='e') || (c=='E'))
+						opt_do_extract = opt_do_extract_withoutpath = 1;
+					if ((c=='o') || (c=='O'))
+						opt_overwrite=1;
+				}
+			}
+			else
+            {
+				if (zipfilename == NULL)
+					zipfilename = argv[i];
+                else if (filename_to_extract==NULL)
+                        filename_to_extract = argv[i] ;
+            }
+		}
+	}
+
+	if (zipfilename!=NULL)
+	{
+		strcpy(filename_try,zipfilename);
+		uf = unzOpen(zipfilename);
+		if (uf==NULL)
+		{
+			strcat(filename_try,".zip");
+			uf = unzOpen(filename_try);
+		}
+	}
+
+	if (uf==NULL)
+	{
+		printf("Cannot open %s or %s.zip\n",zipfilename,zipfilename);
+		exit (1);
+	}
+    printf("%s opened\n",filename_try);
+
+	if (opt_do_list==1)
+		return do_list(uf);
+	else if (opt_do_extract==1)
+    {
+        if (filename_to_extract == NULL)
+		    return do_extract(uf,opt_do_extract_withoutpath,opt_overwrite);
+        else
+            return do_extract_onefile(uf,filename_to_extract,
+                                      opt_do_extract_withoutpath,opt_overwrite);
+    }
+	unzCloseCurrentFile(uf);
+
+	return 0;  /* to avoid warning */
+}

contrib/minizip/minizip.c

@@ -0,0 +1,302 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <errno.h>
+#include <fcntl.h>
+
+#ifdef unix
+# include <unistd.h>
+# include <utime.h>
+# include <sys/types.h>
+# include <sys/stat.h>
+#else
+# include <direct.h>
+# include <io.h>
+#endif
+
+#include "zip.h"
+
+
+#define WRITEBUFFERSIZE (16384)
+#define MAXFILENAME (256)
+
+#ifdef WIN32
+uLong filetime(f, tmzip, dt)
+    char *f;                /* name of file to get info on */
+    tm_zip *tmzip;             /* return value: access, modific. and creation times */
+    uLong *dt;             /* dostime */
+{
+  int ret = 0;
+  {
+      FILETIME ftLocal;
+      HANDLE hFind;
+      WIN32_FIND_DATA  ff32;
+
+      hFind = FindFirstFile(f,&ff32);
+      if (hFind != INVALID_HANDLE_VALUE)
+      {
+        FileTimeToLocalFileTime(&(ff32.ftLastWriteTime),&ftLocal);
+        FileTimeToDosDateTime(&ftLocal,((LPWORD)dt)+1,((LPWORD)dt)+0);
+        FindClose(hFind);
+        ret = 1;
+      }
+  }
+  return ret;
+}
+#else
+#ifdef unix
+uLong filetime(f, tmzip, dt)
+    char *f;                /* name of file to get info on */
+    tm_zip *tmzip;             /* return value: access, modific. and creation times */
+    uLong *dt;             /* dostime */
+{
+  int ret=0;
+  struct stat s;        /* results of stat() */
+  struct tm* filedate;
+  time_t tm_t=0;
+  
+  if (strcmp(f,"-")!=0)
+  {
+    char name[MAXFILENAME];
+    int len = strlen(f);
+    strcpy(name, f);
+    if (name[len - 1] == '/')
+      name[len - 1] = '\0';
+    /* not all systems allow stat'ing a file with / appended */
+    if (stat(name,&s)==0)
+    {
+      tm_t = s.st_mtime;
+      ret = 1;
+    }
+  }
+  filedate = localtime(&tm_t);
+
+  tmzip->tm_sec  = filedate->tm_sec;
+  tmzip->tm_min  = filedate->tm_min;
+  tmzip->tm_hour = filedate->tm_hour;
+  tmzip->tm_mday = filedate->tm_mday;
+  tmzip->tm_mon  = filedate->tm_mon ;
+  tmzip->tm_year = filedate->tm_year;
+
+  return ret;
+}
+#else
+uLong filetime(f, tmzip, dt)
+    char *f;                /* name of file to get info on */
+    tm_zip *tmzip;             /* return value: access, modific. and creation times */
+    uLong *dt;             /* dostime */
+{
+    return 0;
+}
+#endif
+#endif
+
+
+
+
+int check_exist_file(filename)
+    const char* filename;
+{
+	FILE* ftestexist;
+    int ret = 1;
+	ftestexist = fopen(filename,"rb");
+	if (ftestexist==NULL)
+        ret = 0;
+    else
+        fclose(ftestexist);
+    return ret;
+}
+
+void do_banner()
+{
+	printf("MiniZip 0.15, demo of zLib + Zip package written by Gilles Vollant\n");
+	printf("more info at http://wwww.winimage/zLibDll/unzip.htm\n\n");
+}
+
+void do_help()
+{	
+	printf("Usage : minizip [-o] file.zip [files_to_add]\n\n") ;
+}
+
+int main(argc,argv)
+	int argc;
+	char *argv[];
+{
+	int i;
+	int opt_overwrite=0;
+    int opt_compress_level=Z_DEFAULT_COMPRESSION;
+    int zipfilenamearg = 0;
+	char filename_try[MAXFILENAME];
+    int zipok;
+    int err=0;
+    int size_buf=0;
+    void* buf=NULL,
+
+
+	do_banner();
+	if (argc==1)
+	{
+		do_help();
+		exit(0);
+        return 0;
+	}
+	else
+	{
+		for (i=1;i<argc;i++)
+		{
+			if ((*argv[i])=='-')
+			{
+				const char *p=argv[i]+1;
+				
+				while ((*p)!='\0')
+				{			
+					char c=*(p++);;
+					if ((c=='o') || (c=='O'))
+						opt_overwrite = 1;
+                    if ((c>='0') && (c<='9'))
+                        opt_compress_level = c-'0';
+				}
+			}
+			else
+				if (zipfilenamearg == 0)
+                    zipfilenamearg = i ;
+		}
+	}
+
+    size_buf = WRITEBUFFERSIZE;
+    buf = (void*)malloc(size_buf);
+    if (buf==NULL)
+    {
+        printf("Error allocating memory\n");
+        return ZIP_INTERNALERROR;
+    }
+
+	if (zipfilenamearg==0)
+        zipok=0;
+    else
+	{
+        int i,len;
+        int dot_found=0;
+
+        zipok = 1 ;
+		strcpy(filename_try,argv[zipfilenamearg]);
+        len=strlen(filename_try);
+        for (i=0;i<len;i++)
+            if (filename_try[i]=='.')
+                dot_found=1;
+
+        if (dot_found==0)
+            strcat(filename_try,".zip");
+
+        if (opt_overwrite==0)
+            if (check_exist_file(filename_try)!=0)
+			{
+                char rep;
+				do
+				{
+					char answer[128];
+					printf("The file %s exist. Overwrite ? [y]es, [n]o : ",filename_try);
+					scanf("%1s",answer);
+					rep = answer[0] ;
+					if ((rep>='a') && (rep<='z'))
+						rep -= 0x20;
+				}
+				while ((rep!='Y') && (rep!='N'));
+                if (rep=='N')
+                    zipok = 0;
+			}
+    }
+
+    if (zipok==1)
+    {
+        zipFile zf;
+        int errclose;
+        zf = zipOpen(filename_try,0);
+        if (zf == NULL)
+        {
+            printf("error opening %s\n",filename_try);
+            err= ZIP_ERRNO;
+        }
+        else 
+            printf("creating %s\n",filename_try);
+
+        for (i=zipfilenamearg+1;(i<argc) && (err==ZIP_OK);i++)
+        {
+            if (((*(argv[i]))!='-') && ((*(argv[i]))!='/'))
+            {
+                FILE * fin;
+                int size_read;
+                const char* filenameinzip = argv[i];
+                zip_fileinfo zi;
+
+                zi.tmz_date.tm_sec = zi.tmz_date.tm_min = zi.tmz_date.tm_hour = 
+                zi.tmz_date.tm_mday = zi.tmz_date.tm_min = zi.tmz_date.tm_year = 0;
+                zi.dosDate = 0;
+                zi.internal_fa = 0;
+                zi.external_fa = 0;
+                filetime(filenameinzip,&zi.tmz_date,&zi.dosDate);
+
+
+                err = zipOpenNewFileInZip(zf,filenameinzip,&zi,
+                                 NULL,0,NULL,0,NULL /* comment*/,
+                                 (opt_compress_level != 0) ? Z_DEFLATED : 0,
+                                 opt_compress_level);
+
+                if (err != ZIP_OK)
+                    printf("error in opening %s in zipfile\n",filenameinzip);
+                else
+                {
+                    fin = fopen(filenameinzip,"rb");
+                    if (fin==NULL)
+                    {
+                        err=ZIP_ERRNO;
+                        printf("error in opening %s for reading\n",filenameinzip);
+                    }
+                }
+
+                if (err == ZIP_OK)
+                    do
+                    {
+                        err = ZIP_OK;
+                        size_read = fread(buf,1,size_buf,fin);
+                        if (size_read < size_buf)
+                            if (feof(fin)==0)
+                        {
+                            printf("error in reading %s\n",filenameinzip);
+                            err = ZIP_ERRNO;
+                        }
+
+                        if (size_read>0)
+                        {
+                            err = zipWriteInFileInZip (zf,buf,size_read);
+                            if (err<0)
+                            {
+                                printf("error in writing %s in the zipfile\n",
+                                                 filenameinzip);
+                            }
+                                
+                        }
+                    } while ((err == ZIP_OK) && (size_read>0));
+
+                fclose(fin);
+                if (err<0)
+                    err=ZIP_ERRNO;
+                else
+                {                    
+                    err = zipCloseFileInZip(zf);
+                    if (err!=ZIP_OK)
+                        printf("error in closing %s in the zipfile\n",
+                                    filenameinzip);
+                }
+            }
+        }
+        errclose = zipClose(zf,NULL);
+        if (errclose != ZIP_OK)
+            printf("error in closing %s\n",filename_try);
+   }
+
+    free(buf);
+    exit(0);
+	return 0;  /* to avoid warning */
+}

contrib/minizip/readme.txt

@@ -0,0 +1,37 @@
+
+UnZip 0.15 additionnal library
+
+
+  This unzip package allow extract file from .ZIP file, compatible with 
+PKZip 2.04g, WinZip, InfoZip tools and compatible.
+
+  Multi volume ZipFile (span) are not supported, and old compression used by old 
+PKZip 1.x are not supported.
+
+See probdesc.zip from PKWare for specification of .ZIP format.
+
+What is Unzip
+  The Zlib library support the deflate compression and the creation of gzip (.gz) 
+file. Zlib is free and small.
+  The .Zip format, which can contain several compressed files (.gz can containt
+only one file) is a very popular format. This is why I've written a package for reading file compressed in Zipfile.
+
+Using Unzip package
+
+You need source of Zlib (get zlib111.zip and read zlib.h).
+Get unzlb015.zip and read unzip.h (whith documentation of unzip functions)
+
+The Unzip package is only two file : unzip.h and unzip.c. But it use the Zlib 
+  files.
+unztst.c is a simple sample program, which list file in a zipfile and display
+  README.TXT or FILE_ID.DIZ (if these files are found).
+miniunz.c is a mini unzip program.
+
+I'm also currenlyt writing a zipping portion (zip.h, zip.c and test with minizip.c)
+
+Please email me for feedback.
+I hope my source is compatible with Unix system, but I need your help for be sure
+
+Latest revision : Mar 04th, 1998
+
+Check http://www.winimage.com/zLibDll/unzip.html for up to date info.

contrib/minizip/unzip.def

@@ -0,0 +1,15 @@
+	unzOpen                       @61
+	unzClose                      @62
+	unzGetGlobalInfo              @63
+	unzGetCurrentFileInfo         @64
+	unzGoToFirstFile              @65
+	unzGoToNextFile               @66
+	unzOpenCurrentFile            @67
+	unzReadCurrentFile            @68
+	unztell                       @70
+	unzeof                        @71
+	unzCloseCurrentFile           @72
+	unzGetGlobalComment           @73
+	unzStringFileNameCompare      @74
+	unzLocateFile                 @75
+	unzGetLocalExtrafield         @76

contrib/minizip/unzip.h

@@ -0,0 +1,275 @@
+/* unzip.h -- IO for uncompress .zip files using zlib 
+   Version 0.15 beta, Mar 19th, 1998,
+
+   Copyright (C) 1998 Gilles Vollant
+
+   This unzip package allow extract file from .ZIP file, compatible with PKZip 2.04g
+     WinZip, InfoZip tools and compatible.
+   Encryption and multi volume ZipFile (span) are not supported.
+   Old compressions used by old PKZip 1.x are not supported
+
+   THIS IS AN ALPHA VERSION. AT THIS STAGE OF DEVELOPPEMENT, SOMES API OR STRUCTURE
+   CAN CHANGE IN FUTURE VERSION !!
+   I WAIT FEEDBACK at mail info@winimage.com
+   Visit also http://www.winimage.com/zLibDll/unzip.htm for evolution
+
+   Condition of use and distribution are the same than zlib :
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+
+*/
+/* for more info about .ZIP format, see 
+      ftp://ftp.cdrom.com/pub/infozip/doc/appnote-970311-iz.zip
+   PkWare has also a specification at :
+      ftp://ftp.pkware.com/probdesc.zip */
+
+#ifndef _unz_H
+#define _unz_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef _ZLIB_H
+#include "zlib.h"
+#endif
+
+#if defined(STRICTUNZIP) || defined(STRICTZIPUNZIP)
+/* like the STRICT of WIN32, we define a pointer that cannot be converted
+    from (void*) without cast */
+typedef struct TagunzFile__ { int unused; } unzFile__; 
+typedef unzFile__ *unzFile;
+#else
+typedef voidp unzFile;
+#endif
+
+
+#define UNZ_OK                                  (0)
+#define UNZ_END_OF_LIST_OF_FILE (-100)
+#define UNZ_ERRNO               (Z_ERRNO)
+#define UNZ_EOF                 (0)
+#define UNZ_PARAMERROR                  (-102)
+#define UNZ_BADZIPFILE                  (-103)
+#define UNZ_INTERNALERROR               (-104)
+#define UNZ_CRCERROR                    (-105)
+
+/* tm_unz contain date/time info */
+typedef struct tm_unz_s 
+{
+	uInt tm_sec;            /* seconds after the minute - [0,59] */
+	uInt tm_min;            /* minutes after the hour - [0,59] */
+	uInt tm_hour;           /* hours since midnight - [0,23] */
+	uInt tm_mday;           /* day of the month - [1,31] */
+	uInt tm_mon;            /* months since January - [0,11] */
+	uInt tm_year;           /* years - [1980..2044] */
+} tm_unz;
+
+/* unz_global_info structure contain global data about the ZIPfile
+   These data comes from the end of central dir */
+typedef struct unz_global_info_s
+{
+	uLong number_entry;         /* total number of entries in
+				       the central dir on this disk */
+	uLong size_comment;         /* size of the global comment of the zipfile */
+} unz_global_info;
+
+
+/* unz_file_info contain information about a file in the zipfile */
+typedef struct unz_file_info_s
+{
+    uLong version;              /* version made by                 2 bytes */
+    uLong version_needed;       /* version needed to extract       2 bytes */
+    uLong flag;                 /* general purpose bit flag        2 bytes */
+    uLong compression_method;   /* compression method              2 bytes */
+    uLong dosDate;              /* last mod file date in Dos fmt   4 bytes */
+    uLong crc;                  /* crc-32                          4 bytes */
+    uLong compressed_size;      /* compressed size                 4 bytes */ 
+    uLong uncompressed_size;    /* uncompressed size               4 bytes */ 
+    uLong size_filename;        /* filename length                 2 bytes */
+    uLong size_file_extra;      /* extra field length              2 bytes */
+    uLong size_file_comment;    /* file comment length             2 bytes */
+
+    uLong disk_num_start;       /* disk number start               2 bytes */
+    uLong internal_fa;          /* internal file attributes        2 bytes */
+    uLong external_fa;          /* external file attributes        4 bytes */
+
+    tm_unz tmu_date;
+} unz_file_info;
+
+extern int ZEXPORT unzStringFileNameCompare OF ((const char* fileName1,
+												 const char* fileName2,
+												 int iCaseSensitivity));
+/*
+   Compare two filename (fileName1,fileName2).
+   If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp)
+   If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi
+								or strcasecmp)
+   If iCaseSenisivity = 0, case sensitivity is defaut of your operating system
+	(like 1 on Unix, 2 on Windows)
+*/
+
+
+extern unzFile ZEXPORT unzOpen OF((const char *path));
+/*
+  Open a Zip file. path contain the full pathname (by example,
+     on a Windows NT computer "c:\\zlib\\zlib111.zip" or on an Unix computer
+	 "zlib/zlib111.zip".
+	 If the zipfile cannot be opened (file don't exist or in not valid), the
+	   return value is NULL.
+     Else, the return value is a unzFile Handle, usable with other function
+	   of this unzip package.
+*/
+
+extern int ZEXPORT unzClose OF((unzFile file));
+/*
+  Close a ZipFile opened with unzipOpen.
+  If there is files inside the .Zip opened with unzOpenCurrentFile (see later),
+    these files MUST be closed with unzipCloseCurrentFile before call unzipClose.
+  return UNZ_OK if there is no problem. */
+
+extern int ZEXPORT unzGetGlobalInfo OF((unzFile file,
+					unz_global_info *pglobal_info));
+/*
+  Write info about the ZipFile in the *pglobal_info structure.
+  No preparation of the structure is needed
+  return UNZ_OK if there is no problem. */
+
+
+extern int ZEXPORT unzGetGlobalComment OF((unzFile file,
+										   char *szComment,
+					   uLong uSizeBuf));
+/*
+  Get the global comment string of the ZipFile, in the szComment buffer.
+  uSizeBuf is the size of the szComment buffer.
+  return the number of byte copied or an error code <0
+*/
+
+
+/***************************************************************************/
+/* Unzip package allow you browse the directory of the zipfile */
+
+extern int ZEXPORT unzGoToFirstFile OF((unzFile file));
+/*
+  Set the current file of the zipfile to the first file.
+  return UNZ_OK if there is no problem
+*/
+
+extern int ZEXPORT unzGoToNextFile OF((unzFile file));
+/*
+  Set the current file of the zipfile to the next file.
+  return UNZ_OK if there is no problem
+  return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest.
+*/
+
+extern int ZEXPORT unzLocateFile OF((unzFile file, 
+				     const char *szFileName,
+				     int iCaseSensitivity));
+/*
+  Try locate the file szFileName in the zipfile.
+  For the iCaseSensitivity signification, see unzStringFileNameCompare
+
+  return value :
+  UNZ_OK if the file is found. It becomes the current file.
+  UNZ_END_OF_LIST_OF_FILE if the file is not found
+*/
+
+
+extern int ZEXPORT unzGetCurrentFileInfo OF((unzFile file,
+					     unz_file_info *pfile_info,
+					     char *szFileName,
+					     uLong fileNameBufferSize,
+					     void *extraField,
+					     uLong extraFieldBufferSize,
+					     char *szComment,
+					     uLong commentBufferSize));
+/*
+  Get Info about the current file
+  if pfile_info!=NULL, the *pfile_info structure will contain somes info about
+	    the current file
+  if szFileName!=NULL, the filemane string will be copied in szFileName
+			(fileNameBufferSize is the size of the buffer)
+  if extraField!=NULL, the extra field information will be copied in extraField
+			(extraFieldBufferSize is the size of the buffer).
+			This is the Central-header version of the extra field
+  if szComment!=NULL, the comment string of the file will be copied in szComment
+			(commentBufferSize is the size of the buffer)
+*/
+
+/***************************************************************************/
+/* for reading the content of the current zipfile, you can open it, read data
+   from it, and close it (you can close it before reading all the file)
+   */
+
+extern int ZEXPORT unzOpenCurrentFile OF((unzFile file));
+/*
+  Open for reading data the current file in the zipfile.
+  If there is no error, the return value is UNZ_OK.
+*/
+
+extern int ZEXPORT unzCloseCurrentFile OF((unzFile file));
+/*
+  Close the file in zip opened with unzOpenCurrentFile
+  Return UNZ_CRCERROR if all the file was read but the CRC is not good
+*/
+
+												
+extern int ZEXPORT unzReadCurrentFile OF((unzFile file, 
+					  voidp buf,
+					  unsigned len));
+/*
+  Read bytes from the current file (opened by unzOpenCurrentFile)
+  buf contain buffer where data must be copied
+  len the size of buf.
+
+  return the number of byte copied if somes bytes are copied
+  return 0 if the end of file was reached
+  return <0 with error code if there is an error
+    (UNZ_ERRNO for IO error, or zLib error for uncompress error)
+*/
+
+extern z_off_t ZEXPORT unztell OF((unzFile file));
+/*
+  Give the current position in uncompressed data
+*/
+
+extern int ZEXPORT unzeof OF((unzFile file));
+/*
+  return 1 if the end of file was reached, 0 elsewhere 
+*/
+
+extern int ZEXPORT unzGetLocalExtrafield OF((unzFile file,
+											 voidp buf,
+											 unsigned len));
+/*
+  Read extra field from the current file (opened by unzOpenCurrentFile)
+  This is the local-header version of the extra field (sometimes, there is
+    more info in the local-header version than in the central-header)
+
+  if buf==NULL, it return the size of the local extra field
+
+  if buf!=NULL, len is the size of the buffer, the extra header is copied in
+	buf.
+  the return value is the number of bytes copied in buf, or (if <0) 
+	the error code
+*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _unz_H */

contrib/minizip/zip.c

@@ -0,0 +1,718 @@
+/* zip.c -- IO on .zip files using zlib 
+   Version 0.15 beta, Mar 19th, 1998,
+
+   Read zip.h for more info
+*/
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "zlib.h"
+#include "zip.h"
+
+#ifdef STDC
+#  include <stddef.h>
+#  include <string.h>
+#  include <stdlib.h>
+#endif
+#ifdef NO_ERRNO_H
+    extern int errno;
+#else
+#   include <errno.h>
+#endif
+
+
+#ifndef local
+#  define local static
+#endif
+/* compile with -Dlocal if your debugger can't find static symbols */
+
+#ifndef VERSIONMADEBY
+# define VERSIONMADEBY   (0x0) /* platform depedent */
+#endif
+
+#ifndef Z_BUFSIZE
+#define Z_BUFSIZE (16384)
+#endif
+
+#ifndef Z_MAXFILENAMEINZIP
+#define Z_MAXFILENAMEINZIP (256)
+#endif
+
+#ifndef ALLOC
+# define ALLOC(size) (malloc(size))
+#endif
+#ifndef TRYFREE
+# define TRYFREE(p) {if (p) free(p);}
+#endif
+
+/*
+#define SIZECENTRALDIRITEM (0x2e)
+#define SIZEZIPLOCALHEADER (0x1e)
+*/
+
+/* I've found an old Unix (a SunOS 4.1.3_U1) without all SEEK_* defined.... */
+
+#ifndef SEEK_CUR
+#define SEEK_CUR    1
+#endif
+
+#ifndef SEEK_END
+#define SEEK_END    2
+#endif
+
+#ifndef SEEK_SET
+#define SEEK_SET    0
+#endif
+
+const char zip_copyright[] =
+   " zip 0.15 Copyright 1998 Gilles Vollant ";
+
+
+#define SIZEDATA_INDATABLOCK (4096-(4*4))
+
+#define LOCALHEADERMAGIC    (0x04034b50)
+#define CENTRALHEADERMAGIC  (0x02014b50)
+#define ENDHEADERMAGIC      (0x06054b50)
+
+#define FLAG_LOCALHEADER_OFFSET (0x06)
+#define CRC_LOCALHEADER_OFFSET  (0x0e)
+
+#define SIZECENTRALHEADER (0x2e) /* 46 */
+
+typedef struct linkedlist_datablock_internal_s
+{
+  struct linkedlist_datablock_internal_s* next_datablock;
+  uLong  avail_in_this_block;
+  uLong  filled_in_this_block;
+  uLong  unused; /* for future use and alignement */
+  unsigned char data[SIZEDATA_INDATABLOCK];
+} linkedlist_datablock_internal;
+
+typedef struct linkedlist_data_s
+{
+    linkedlist_datablock_internal* first_block;
+    linkedlist_datablock_internal* last_block;
+} linkedlist_data;
+
+
+typedef struct
+{
+	z_stream stream;            /* zLib stream structure for inflate */
+    int  stream_initialised;    /* 1 is stream is initialised */
+    uInt pos_in_buffered_data;  /* last written byte in buffered_data */
+
+    uLong pos_local_header;     /* offset of the local header of the file 
+                                     currenty writing */
+    char* central_header;       /* central header data for the current file */
+    uLong size_centralheader;   /* size of the central header for cur file */
+    uLong flag;                 /* flag of the file currently writing */
+
+    int  method;                /* compression method of file currenty wr.*/
+    Byte buffered_data[Z_BUFSIZE];/* buffer contain compressed data to be writ*/
+    uLong dosDate;
+    uLong crc32;
+} curfile_info;
+
+typedef struct
+{
+    FILE * filezip;
+    linkedlist_data central_dir;/* datablock with central dir in construction*/
+    int  in_opened_file_inzip;  /* 1 if a file in the zip is currently writ.*/
+    curfile_info ci;            /* info on the file curretly writing */
+
+    uLong begin_pos;            /* position of the beginning of the zipfile */
+    uLong number_entry;
+} zip_internal;
+
+local linkedlist_datablock_internal* allocate_new_datablock()
+{
+    linkedlist_datablock_internal* ldi;
+    ldi = (linkedlist_datablock_internal*)
+                 ALLOC(sizeof(linkedlist_datablock_internal));
+    if (ldi!=NULL)
+    {
+        ldi->next_datablock = NULL ;
+        ldi->filled_in_this_block = 0 ;
+        ldi->avail_in_this_block = SIZEDATA_INDATABLOCK ;
+    }
+    return ldi;
+}
+
+local void free_datablock(ldi)
+    linkedlist_datablock_internal* ldi;
+{
+    while (ldi!=NULL)
+    {
+        linkedlist_datablock_internal* ldinext = ldi->next_datablock;
+        TRYFREE(ldi);
+        ldi = ldinext;
+    }
+}
+
+local void init_linkedlist(ll)
+    linkedlist_data* ll;
+{
+    ll->first_block = ll->last_block = NULL;
+}
+
+local void free_linkedlist(ll)
+    linkedlist_data* ll;
+{
+    free_datablock(ll->first_block);
+    ll->first_block = ll->last_block = NULL;
+}
+
+
+local int add_data_in_datablock(ll,buf,len)
+    linkedlist_data* ll;    
+    const void* buf;
+    uLong len;
+{
+    linkedlist_datablock_internal* ldi;
+    const unsigned char* from_copy;
+
+    if (ll==NULL)
+        return ZIP_INTERNALERROR;
+
+    if (ll->last_block == NULL)
+    {
+        ll->first_block = ll->last_block = allocate_new_datablock();
+        if (ll->first_block == NULL)
+            return ZIP_INTERNALERROR;
+    }
+
+    ldi = ll->last_block;
+    from_copy = (unsigned char*)buf;
+
+    while (len>0)
+    {
+        uInt copy_this;
+        uInt i;
+        unsigned char* to_copy;
+
+        if (ldi->avail_in_this_block==0)
+        {
+            ldi->next_datablock = allocate_new_datablock();
+            if (ldi->next_datablock == NULL)
+                return ZIP_INTERNALERROR;
+            ldi = ldi->next_datablock ;
+            ll->last_block = ldi;
+        }
+
+        if (ldi->avail_in_this_block < len)
+            copy_this = (uInt)ldi->avail_in_this_block;
+        else
+            copy_this = (uInt)len;
+
+        to_copy = &(ldi->data[ldi->filled_in_this_block]);
+
+        for (i=0;i<copy_this;i++)
+            *(to_copy+i)=*(from_copy+i);
+
+        ldi->filled_in_this_block += copy_this;
+        ldi->avail_in_this_block -= copy_this;
+        from_copy += copy_this ;
+        len -= copy_this;
+    }
+    return ZIP_OK;
+}
+
+
+local int write_datablock(fout,ll)
+    FILE * fout;
+    linkedlist_data* ll;    
+{
+    linkedlist_datablock_internal* ldi;
+    ldi = ll->first_block;
+    while (ldi!=NULL)
+    {
+        if (ldi->filled_in_this_block > 0)
+            if (fwrite(ldi->data,(uInt)ldi->filled_in_this_block,1,fout)!=1)
+                return ZIP_ERRNO;
+        ldi = ldi->next_datablock;
+    }
+    return ZIP_OK;
+}
+
+/****************************************************************************/
+
+/* ===========================================================================
+   Outputs a long in LSB order to the given file
+   nbByte == 1, 2 or 4 (byte, short or long)
+*/
+
+local int ziplocal_putValue OF((FILE *file, uLong x, int nbByte));
+local int ziplocal_putValue (file, x, nbByte)
+    FILE *file;
+    uLong x;
+    int nbByte;
+{
+    unsigned char buf[4];
+    int n;
+    for (n = 0; n < nbByte; n++) {
+        buf[n] = (unsigned char)(x & 0xff);
+        x >>= 8;
+    }
+    if (fwrite(buf,nbByte,1,file)!=1)
+        return ZIP_ERRNO;
+    else
+        return ZIP_OK;
+}
+
+local void ziplocal_putValue_inmemory OF((void* dest, uLong x, int nbByte));
+local void ziplocal_putValue_inmemory (dest, x, nbByte)
+    void* dest;
+    uLong x;
+    int nbByte;
+{
+    unsigned char* buf=(unsigned char*)dest;
+    int n;
+    for (n = 0; n < nbByte; n++) {
+        buf[n] = (unsigned char)(x & 0xff);
+        x >>= 8;
+    }
+}
+/****************************************************************************/
+
+
+local uLong ziplocal_TmzDateToDosDate(ptm,dosDate)
+    tm_zip* ptm;
+    uLong dosDate;
+{
+    uLong year = (uLong)ptm->tm_year;
+    if (year>1980)
+        year-=1980;
+    else if (year>80)
+        year-=80;
+    return
+      (uLong) (((ptm->tm_mday) + (32 * (ptm->tm_mon+1)) + (512 * year)) << 16) |
+        ((ptm->tm_sec/2) + (32* ptm->tm_min) + (2048 * (uLong)ptm->tm_hour));
+}
+
+
+/****************************************************************************/
+
+extern zipFile ZEXPORT zipOpen (pathname, append)
+    const char *pathname;
+    int append;
+{
+    zip_internal ziinit;
+    zip_internal* zi;
+
+    ziinit.filezip = fopen(pathname,(append == 0) ? "wb" : "ab");
+    if (ziinit.filezip == NULL)
+        return NULL;
+    ziinit.begin_pos = ftell(ziinit.filezip);
+    ziinit.in_opened_file_inzip = 0;
+    ziinit.ci.stream_initialised = 0;
+    ziinit.number_entry = 0;
+    init_linkedlist(&(ziinit.central_dir));
+
+
+    zi = (zip_internal*)ALLOC(sizeof(zip_internal));
+    if (zi==NULL)
+    {
+        fclose(ziinit.filezip);
+        return NULL;
+    }
+
+    *zi = ziinit;
+    return (zipFile)zi;
+}
+
+extern int ZEXPORT zipOpenNewFileInZip (file, filename, zipfi, 
+                                        extrafield_local, size_extrafield_local,
+                                        extrafield_global, size_extrafield_global,
+                                        comment, method, level)
+    zipFile file;
+    const char* filename;
+    const zip_fileinfo* zipfi;
+    const void* extrafield_local;
+    uInt size_extrafield_local;
+    const void* extrafield_global;
+    uInt size_extrafield_global;
+    const char* comment;
+    int method;
+    int level;
+{
+    zip_internal* zi;
+    uInt size_filename;
+    uInt size_comment;
+    uInt i;
+    int err = ZIP_OK;
+
+    if (file == NULL)
+        return ZIP_PARAMERROR;
+    if ((method!=0) && (method!=Z_DEFLATED))
+        return ZIP_PARAMERROR;
+
+    zi = (zip_internal*)file;
+
+    if (zi->in_opened_file_inzip == 1)
+    {
+        err = zipCloseFileInZip (file);
+        if (err != ZIP_OK)
+            return err;
+    }
+
+
+    if (filename==NULL)
+        filename="-";
+
+    if (comment==NULL)
+        size_comment = 0;
+    else
+        size_comment = strlen(comment);
+
+    size_filename = strlen(filename);
+
+    if (zipfi == NULL)
+        zi->ci.dosDate = 0;
+    else
+    {
+        if (zipfi->dosDate != 0)
+            zi->ci.dosDate = zipfi->dosDate;
+        else zi->ci.dosDate = ziplocal_TmzDateToDosDate(&zipfi->tmz_date,zipfi->dosDate);
+    }
+
+    zi->ci.flag = 0;
+    if ((level==8) || (level==9))
+      zi->ci.flag |= 2;
+    if ((level==2))
+      zi->ci.flag |= 4;
+    if ((level==1))
+      zi->ci.flag |= 6;
+
+    zi->ci.crc32 = 0;
+    zi->ci.method = method;
+    zi->ci.stream_initialised = 0;
+    zi->ci.pos_in_buffered_data = 0;
+    zi->ci.pos_local_header = ftell(zi->filezip);
+    zi->ci.size_centralheader = SIZECENTRALHEADER + size_filename + 
+                                      size_extrafield_global + size_comment;
+    zi->ci.central_header = (char*)ALLOC((uInt)zi->ci.size_centralheader);
+
+    ziplocal_putValue_inmemory(zi->ci.central_header,(uLong)CENTRALHEADERMAGIC,4);
+    /* version info */
+    ziplocal_putValue_inmemory(zi->ci.central_header+4,(uLong)VERSIONMADEBY,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+6,(uLong)20,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+8,(uLong)zi->ci.flag,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+10,(uLong)zi->ci.method,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+12,(uLong)zi->ci.dosDate,4);
+    ziplocal_putValue_inmemory(zi->ci.central_header+16,(uLong)0,4); /*crc*/
+    ziplocal_putValue_inmemory(zi->ci.central_header+20,(uLong)0,4); /*compr size*/
+    ziplocal_putValue_inmemory(zi->ci.central_header+24,(uLong)0,4); /*uncompr size*/
+    ziplocal_putValue_inmemory(zi->ci.central_header+28,(uLong)size_filename,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+30,(uLong)size_extrafield_global,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+32,(uLong)size_comment,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+34,(uLong)0,2); /*disk nm start*/
+
+    if (zipfi==NULL)
+        ziplocal_putValue_inmemory(zi->ci.central_header+36,(uLong)0,2); 
+    else
+        ziplocal_putValue_inmemory(zi->ci.central_header+36,(uLong)zipfi->internal_fa,2); 
+
+    if (zipfi==NULL)
+        ziplocal_putValue_inmemory(zi->ci.central_header+38,(uLong)0,4); 
+    else
+        ziplocal_putValue_inmemory(zi->ci.central_header+38,(uLong)zipfi->external_fa,4);
+
+    ziplocal_putValue_inmemory(zi->ci.central_header+42,(uLong)zi->ci.pos_local_header,4);
+
+    for (i=0;i<size_filename;i++)
+        *(zi->ci.central_header+SIZECENTRALHEADER+i) = *(filename+i);
+
+    for (i=0;i<size_extrafield_global;i++)
+        *(zi->ci.central_header+SIZECENTRALHEADER+size_filename+i) =
+              *(((const char*)extrafield_global)+i);
+
+    for (i=0;i<size_comment;i++)
+        *(zi->ci.central_header+SIZECENTRALHEADER+size_filename+
+              size_extrafield_global+i) = *(filename+i);
+    if (zi->ci.central_header == NULL)
+        return ZIP_INTERNALERROR;
+
+    /* write the local header */
+    err = ziplocal_putValue(zi->filezip,(uLong)LOCALHEADERMAGIC,4);
+
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)20,2);/* version needed to extract */
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.flag,2);
+
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.method,2);
+
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.dosDate,4);
+
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)0,4); /* crc 32, unknown */
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)0,4); /* compressed size, unknown */
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)0,4); /* uncompressed size, unknown */
+
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)size_filename,2);
+
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)size_extrafield_local,2);
+
+    if ((err==ZIP_OK) && (size_filename>0))
+        if (fwrite(filename,(uInt)size_filename,1,zi->filezip)!=1)
+                err = ZIP_ERRNO;
+
+    if ((err==ZIP_OK) && (size_extrafield_local>0))
+        if (fwrite(extrafield_local,(uInt)size_extrafield_local,1,zi->filezip)
+                                                                           !=1)
+                err = ZIP_ERRNO;
+
+    zi->ci.stream.avail_in = (uInt)0;
+    zi->ci.stream.avail_out = (uInt)Z_BUFSIZE;
+    zi->ci.stream.next_out = zi->ci.buffered_data;
+    zi->ci.stream.total_in = 0;
+    zi->ci.stream.total_out = 0;
+
+    if ((err==ZIP_OK) && (zi->ci.method == Z_DEFLATED))
+    {
+        zi->ci.stream.zalloc = (alloc_func)0;
+        zi->ci.stream.zfree = (free_func)0;
+        zi->ci.stream.opaque = (voidpf)0;
+
+        err = deflateInit2(&zi->ci.stream, level,
+               Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, 0);
+
+        if (err==Z_OK)
+            zi->ci.stream_initialised = 1;
+    }
+
+
+    if (err==Z_OK)
+        zi->in_opened_file_inzip = 1;
+    return err;
+}
+
+extern int ZEXPORT zipWriteInFileInZip (file, buf, len)
+    zipFile file;
+    const voidp buf;
+    unsigned len;
+{
+    zip_internal* zi;
+    int err=ZIP_OK;
+
+    if (file == NULL)
+        return ZIP_PARAMERROR;
+    zi = (zip_internal*)file;
+
+    if (zi->in_opened_file_inzip == 0)
+        return ZIP_PARAMERROR;
+
+    zi->ci.stream.next_in = buf;
+    zi->ci.stream.avail_in = len;
+    zi->ci.crc32 = crc32(zi->ci.crc32,buf,len);
+
+    while ((err==ZIP_OK) && (zi->ci.stream.avail_in>0))
+    {
+        if (zi->ci.stream.avail_out == 0)
+        {
+            if (fwrite(zi->ci.buffered_data,(uInt)zi->ci.pos_in_buffered_data,1,zi->filezip)
+                                                                           !=1)
+                err = ZIP_ERRNO;
+            zi->ci.pos_in_buffered_data = 0;
+            zi->ci.stream.avail_out = (uInt)Z_BUFSIZE;
+            zi->ci.stream.next_out = zi->ci.buffered_data;
+        }
+
+        if (zi->ci.method == Z_DEFLATED)
+        {
+            uLong uTotalOutBefore = zi->ci.stream.total_out;
+            err=deflate(&zi->ci.stream,  Z_NO_FLUSH);
+            zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ;
+
+        }
+        else
+        {
+            uInt copy_this,i;
+            if (zi->ci.stream.avail_in < zi->ci.stream.avail_out)
+                copy_this = zi->ci.stream.avail_in;
+            else
+                copy_this = zi->ci.stream.avail_out;
+            for (i=0;i<copy_this;i++)
+                *(((char*)zi->ci.stream.next_out)+i) =
+                    *(((const char*)zi->ci.stream.next_in)+i);
+            {
+                zi->ci.stream.avail_in -= copy_this;
+                zi->ci.stream.avail_out-= copy_this;
+                zi->ci.stream.next_in+= copy_this;
+                zi->ci.stream.next_out+= copy_this;
+                zi->ci.stream.total_in+= copy_this;
+                zi->ci.stream.total_out+= copy_this;
+                zi->ci.pos_in_buffered_data += copy_this;
+            }
+        }
+    }
+
+    return 0;
+}
+
+extern int ZEXPORT zipCloseFileInZip (file)
+    zipFile file;
+{
+    zip_internal* zi;
+    int err=ZIP_OK;
+
+    if (file == NULL)
+        return ZIP_PARAMERROR;
+    zi = (zip_internal*)file;
+
+    if (zi->in_opened_file_inzip == 0)    
+        return ZIP_PARAMERROR;
+    zi->ci.stream.avail_in = 0;
+    
+    if (zi->ci.method == Z_DEFLATED)
+        while (err==ZIP_OK)
+    {
+        uLong uTotalOutBefore;
+        if (zi->ci.stream.avail_out == 0)
+        {
+            if (fwrite(zi->ci.buffered_data,(uInt)zi->ci.pos_in_buffered_data,1,zi->filezip)
+                                                                           !=1)
+                err = ZIP_ERRNO;
+            zi->ci.pos_in_buffered_data = 0;
+            zi->ci.stream.avail_out = (uInt)Z_BUFSIZE;
+            zi->ci.stream.next_out = zi->ci.buffered_data;
+        }
+        uTotalOutBefore = zi->ci.stream.total_out;
+        err=deflate(&zi->ci.stream,  Z_FINISH);
+        zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ;
+    }
+
+    if (err==Z_STREAM_END)
+        err=ZIP_OK; /* this is normal */
+
+    if ((zi->ci.pos_in_buffered_data>0) && (err==ZIP_OK))
+        if (fwrite(zi->ci.buffered_data,(uInt)zi->ci.pos_in_buffered_data,1,zi->filezip)
+                                                                       !=1)
+            err = ZIP_ERRNO;
+
+    if ((zi->ci.method == Z_DEFLATED) && (err==ZIP_OK))
+    {
+        err=deflateEnd(&zi->ci.stream);
+        zi->ci.stream_initialised = 0;
+    }
+
+    ziplocal_putValue_inmemory(zi->ci.central_header+16,(uLong)zi->ci.crc32,4); /*crc*/
+    ziplocal_putValue_inmemory(zi->ci.central_header+20,
+                                (uLong)zi->ci.stream.total_out,4); /*compr size*/
+    ziplocal_putValue_inmemory(zi->ci.central_header+24,
+                                (uLong)zi->ci.stream.total_in,4); /*uncompr size*/
+
+    if (err==ZIP_OK)
+        err = add_data_in_datablock(&zi->central_dir,zi->ci.central_header,
+                                       (uLong)zi->ci.size_centralheader);
+    free(zi->ci.central_header);
+
+    if (err==ZIP_OK)
+    {
+        long cur_pos_inzip = ftell(zi->filezip);
+	    if (fseek(zi->filezip,
+                  zi->ci.pos_local_header + 14,SEEK_SET)!=0)
+		    err = ZIP_ERRNO;
+
+        if (err==ZIP_OK)
+            err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.crc32,4); /* crc 32, unknown */
+
+        if (err==ZIP_OK) /* compressed size, unknown */
+            err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.stream.total_out,4); 
+
+        if (err==ZIP_OK) /* uncompressed size, unknown */
+            err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.stream.total_in,4);
+
+	    if (fseek(zi->filezip,
+                  cur_pos_inzip,SEEK_SET)!=0)
+		    err = ZIP_ERRNO;
+    }
+
+    zi->number_entry ++;
+    zi->in_opened_file_inzip = 0;
+
+    return err;
+}
+
+extern int ZEXPORT zipClose (file, global_comment)
+    zipFile file;
+    const char* global_comment;
+{
+    zip_internal* zi;
+    int err = 0;
+    uLong size_centraldir = 0;
+    uLong centraldir_pos_inzip ;
+    uInt size_global_comment;
+    if (file == NULL)
+        return ZIP_PARAMERROR;
+    zi = (zip_internal*)file;
+
+    if (zi->in_opened_file_inzip == 1)
+    {
+        err = zipCloseFileInZip (file);
+    }
+
+    if (global_comment==NULL)
+        size_global_comment = 0;
+    else
+        size_global_comment = strlen(global_comment);
+
+
+    centraldir_pos_inzip = ftell(zi->filezip);
+    if (err==ZIP_OK)
+    {
+        linkedlist_datablock_internal* ldi = zi->central_dir.first_block ;
+        while (ldi!=NULL)
+        {
+            if ((err==ZIP_OK) && (ldi->filled_in_this_block>0))
+                if (fwrite(ldi->data,(uInt)ldi->filled_in_this_block,
+                                        1,zi->filezip) !=1 )
+                    err = ZIP_ERRNO;
+
+            size_centraldir += ldi->filled_in_this_block;
+            ldi = ldi->next_datablock;
+        }
+    }
+    free_datablock(zi->central_dir.first_block);
+
+    if (err==ZIP_OK) /* Magic End */
+        err = ziplocal_putValue(zi->filezip,(uLong)ENDHEADERMAGIC,4);
+
+    if (err==ZIP_OK) /* number of this disk */
+        err = ziplocal_putValue(zi->filezip,(uLong)0,2);
+
+    if (err==ZIP_OK) /* number of the disk with the start of the central directory */
+        err = ziplocal_putValue(zi->filezip,(uLong)0,2);
+
+    if (err==ZIP_OK) /* total number of entries in the central dir on this disk */
+        err = ziplocal_putValue(zi->filezip,(uLong)zi->number_entry,2);
+
+    if (err==ZIP_OK) /* total number of entries in the central dir */
+        err = ziplocal_putValue(zi->filezip,(uLong)zi->number_entry,2);
+
+    if (err==ZIP_OK) /* size of the central directory */
+        err = ziplocal_putValue(zi->filezip,(uLong)size_centraldir,4);
+
+    if (err==ZIP_OK) /* offset of start of central directory with respect to the 
+	                        starting disk number */
+        err = ziplocal_putValue(zi->filezip,(uLong)centraldir_pos_inzip ,4);
+
+    if (err==ZIP_OK) /* zipfile comment length */
+        err = ziplocal_putValue(zi->filezip,(uLong)size_global_comment,2);
+
+    if ((err==ZIP_OK) && (size_global_comment>0))
+        if (fwrite(global_comment,(uInt)size_global_comment,1,zi->filezip) !=1 )
+                err = ZIP_ERRNO;
+    fclose(zi->filezip);
+    TRYFREE(zi);
+
+    return err;
+}

contrib/minizip/zip.def

@@ -0,0 +1,5 @@
+	zipOpen                       @80
+	zipOpenNewFileInZip           @81
+	zipWriteInFileInZip           @82
+	zipCloseFileInZip             @83
+	zipClose                      @84

contrib/minizip/zip.h

@@ -0,0 +1,150 @@
+/* zip.h -- IO for compress .zip files using zlib 
+   Version 0.15 alpha, Mar 19th, 1998,
+
+   Copyright (C) 1998 Gilles Vollant
+
+   This unzip package allow creates .ZIP file, compatible with PKZip 2.04g
+     WinZip, InfoZip tools and compatible.
+   Encryption and multi volume ZipFile (span) are not supported.
+   Old compressions used by old PKZip 1.x are not supported
+
+  For uncompress .zip file, look at unzip.h
+
+   THIS IS AN ALPHA VERSION. AT THIS STAGE OF DEVELOPPEMENT, SOMES API OR STRUCTURE
+   CAN CHANGE IN FUTURE VERSION !!
+   I WAIT FEEDBACK at mail info@winimage.com
+   Visit also http://www.winimage.com/zLibDll/zip.htm for evolution
+
+   Condition of use and distribution are the same than zlib :
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+
+*/
+
+/* for more info about .ZIP format, see 
+      ftp://ftp.cdrom.com/pub/infozip/doc/appnote-970311-iz.zip
+   PkWare has also a specification at :
+      ftp://ftp.pkware.com/probdesc.zip
+*/
+
+#ifndef _zip_H
+#define _zip_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef _ZLIB_H
+#include "zlib.h"
+#endif
+
+#if defined(STRICTZIP) || defined(STRICTZIPUNZIP)
+/* like the STRICT of WIN32, we define a pointer that cannot be converted
+    from (void*) without cast */
+typedef struct TagzipFile__ { int unused; } zipFile__; 
+typedef zipFile__ *zipFile;
+#else
+typedef voidp zipFile;
+#endif
+
+#define ZIP_OK                                  (0)
+#define ZIP_ERRNO               (Z_ERRNO)
+#define ZIP_PARAMERROR                  (-102)
+#define ZIP_INTERNALERROR               (-104)
+
+/* tm_zip contain date/time info */
+typedef struct tm_zip_s 
+{
+	uInt tm_sec;            /* seconds after the minute - [0,59] */
+	uInt tm_min;            /* minutes after the hour - [0,59] */
+	uInt tm_hour;           /* hours since midnight - [0,23] */
+	uInt tm_mday;           /* day of the month - [1,31] */
+	uInt tm_mon;            /* months since January - [0,11] */
+	uInt tm_year;           /* years - [1980..2044] */
+} tm_zip;
+
+typedef struct
+{
+	tm_zip      tmz_date;       /* date in understandable format           */
+    uLong       dosDate;       /* if dos_date == 0, tmu_date is used      */
+/*    uLong       flag;        */   /* general purpose bit flag        2 bytes */
+
+    uLong       internal_fa;    /* internal file attributes        2 bytes */
+    uLong       external_fa;    /* external file attributes        4 bytes */
+} zip_fileinfo;
+
+extern zipFile ZEXPORT zipOpen OF((const char *pathname, int append));
+/*
+  Create a zipfile.
+	 pathname contain on Windows NT a filename like "c:\\zlib\\zlib111.zip" or on
+	   an Unix computer "zlib/zlib111.zip".
+	 if the file pathname exist and append=1, the zip will be created at the end
+	   of the file. (useful if the file contain a self extractor code)
+	 If the zipfile cannot be opened, the return value is NULL.
+     Else, the return value is a zipFile Handle, usable with other function
+	   of this zip package.
+
+
+*/
+
+extern int ZEXPORT zipOpenNewFileInZip OF((zipFile file,
+					   const char* filename,
+					   const zip_fileinfo* zipfi,
+					   const void* extrafield_local,
+					   uInt size_extrafield_local,
+					   const void* extrafield_global,
+					   uInt size_extrafield_global,
+					   const char* comment,
+					   int method,
+					   int level));
+/*
+  Open a file in the ZIP for writing.
+  filename : the filename in zip (if NULL, '-' without quote will be used
+  *zipfi contain supplemental information
+  if extrafield_local!=NULL and size_extrafield_local>0, extrafield_local
+    contains the extrafield data the the local header
+  if extrafield_global!=NULL and size_extrafield_global>0, extrafield_global
+    contains the extrafield data the the local header
+  if comment != NULL, comment contain the comment string
+  method contain the compression method (0 for store, Z_DEFLATED for deflate)
+  level contain the level of compression (can be Z_DEFAULT_COMPRESSION)
+*/
+
+extern int ZEXPORT zipWriteInFileInZip OF((zipFile file,
+					   const voidp buf,
+					   unsigned len));
+/*
+  Write data in the zipfile
+*/
+
+extern int ZEXPORT zipCloseFileInZip OF((zipFile file));
+/*
+  Close the current file in the zipfile
+*/
+
+extern int ZEXPORT zipClose OF((zipFile file,
+				const char* global_comment));
+/*
+  Close the zipfile
+*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _zip_H */

contrib/minizip/zlibvc.def

@@ -0,0 +1,74 @@
+LIBRARY		"zlib"
+
+DESCRIPTION	'"""zlib data compression library"""'
+
+
+VERSION		1.11
+
+
+HEAPSIZE	1048576,8192
+
+EXPORTS
+    adler32                        @1
+    compress                       @2
+    crc32                          @3
+    deflate                        @4
+    deflateCopy                    @5
+    deflateEnd                     @6
+    deflateInit2_                  @7
+    deflateInit_                   @8
+    deflateParams                  @9
+    deflateReset                   @10
+    deflateSetDictionary           @11
+    gzclose                        @12
+    gzdopen                        @13
+    gzerror                        @14
+    gzflush                        @15
+    gzopen                         @16
+    gzread                         @17
+    gzwrite                        @18
+    inflate                        @19
+    inflateEnd                     @20
+    inflateInit2_                  @21
+    inflateInit_                   @22
+    inflateReset                   @23
+    inflateSetDictionary           @24
+    inflateSync                    @25
+    uncompress                     @26
+    zlibVersion                    @27
+    gzprintf                       @28
+    gzputc                         @29
+    gzgetc                         @30
+    gzseek                         @31
+    gzrewind                       @32
+    gztell                         @33
+    gzeof                          @34
+    gzsetparams                    @35
+    zError                         @36
+    inflateSyncPoint               @37
+    get_crc_table                  @38
+    compress2                      @39
+    gzputs                         @40
+    gzgets                         @41
+
+	unzOpen                       @61
+	unzClose                      @62
+	unzGetGlobalInfo              @63
+	unzGetCurrentFileInfo         @64
+	unzGoToFirstFile              @65
+	unzGoToNextFile               @66
+	unzOpenCurrentFile            @67
+	unzReadCurrentFile            @68
+	unztell                       @70
+	unzeof                        @71
+	unzCloseCurrentFile           @72
+	unzGetGlobalComment           @73
+	unzStringFileNameCompare      @74
+	unzLocateFile                 @75
+	unzGetLocalExtrafield         @76
+
+	zipOpen                       @80
+	zipOpenNewFileInZip           @81
+	zipWriteInFileInZip           @82
+	zipCloseFileInZip             @83
+	zipClose                      @84

contrib/minizip/zlibvc.dsp

@@ -0,0 +1,651 @@
+# Microsoft Developer Studio Project File - Name="zlibvc" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 5.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102
+# TARGTYPE "Win32 (ALPHA) Dynamic-Link Library" 0x0602
+
+CFG=zlibvc - Win32 Release
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "zlibvc.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "zlibvc.mak" CFG="zlibvc - Win32 Release"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "zlibvc - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlibvc - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlibvc - Win32 ReleaseAxp" (based on\
+ "Win32 (ALPHA) Dynamic-Link Library")
+!MESSAGE "zlibvc - Win32 ReleaseWithoutAsm" (based on\
+ "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlibvc - Win32 ReleaseWithoutCrtdll" (based on\
+ "Win32 (x86) Dynamic-Link Library")
+!MESSAGE 
+
+# Begin Project
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir ".\Release"
+# PROP BASE Intermediate_Dir ".\Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir ".\Release"
+# PROP Intermediate_Dir ".\Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /FD /c
+# SUBTRACT CPP /YX
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "NDEBUG"
+# ADD RSC /l 0x40c /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /machine:I386
+# ADD LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
+# SUBTRACT LINK32 /pdb:none
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir ".\Debug"
+# PROP BASE Intermediate_Dir ".\Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir ".\Debug"
+# PROP Intermediate_Dir ".\Debug"
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /YX /c
+# ADD CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /FD /c
+# SUBTRACT CPP /YX
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "_DEBUG" /win32
+# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "_DEBUG"
+# ADD RSC /l 0x40c /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /debug /machine:I386
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /debug /machine:I386 /out:".\Debug\zlib.dll"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlibvc__"
+# PROP BASE Intermediate_Dir "zlibvc__"
+# PROP BASE Ignore_Export_Lib 0
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "zlibvc__"
+# PROP Intermediate_Dir "zlibvc__"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+CPP=cl.exe
+# ADD BASE CPP /nologo /MT /Gt0 /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /YX /FD /c
+# ADD CPP /nologo /MT /Gt0 /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /FD /c
+# SUBTRACT CPP /YX
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "NDEBUG"
+# ADD RSC /l 0x40c /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 crtdll.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /map /machine:ALPHA /nodefaultlib /out:".\Release\zlib.dll"
+# SUBTRACT BASE LINK32 /pdb:none
+# ADD LINK32 crtdll.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /map /machine:ALPHA /nodefaultlib /out:"zlibvc__\zlib.dll"
+# SUBTRACT LINK32 /pdb:none
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlibvc_0"
+# PROP BASE Intermediate_Dir "zlibvc_0"
+# PROP BASE Ignore_Export_Lib 0
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "zlibvc_0"
+# PROP Intermediate_Dir "zlibvc_0"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /YX /FD /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /FD /c
+# SUBTRACT CPP /YX
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "NDEBUG"
+# ADD RSC /l 0x40c /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
+# SUBTRACT BASE LINK32 /pdb:none
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\zlibvc_0\zlib.dll"
+# SUBTRACT LINK32 /pdb:none
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlibvc_1"
+# PROP BASE Intermediate_Dir "zlibvc_1"
+# PROP BASE Ignore_Export_Lib 0
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "zlibvc_1"
+# PROP Intermediate_Dir "zlibvc_1"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /YX /FD /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /FD /c
+# SUBTRACT CPP /YX
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "NDEBUG"
+# ADD RSC /l 0x40c /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
+# SUBTRACT BASE LINK32 /pdb:none
+# ADD LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\zlibvc_1\zlib.dll"
+# SUBTRACT LINK32 /pdb:none
+
+!ENDIF 
+
+# Begin Target
+
+# Name "zlibvc - Win32 Release"
+# Name "zlibvc - Win32 Debug"
+# Name "zlibvc - Win32 ReleaseAxp"
+# Name "zlibvc - Win32 ReleaseWithoutAsm"
+# Name "zlibvc - Win32 ReleaseWithoutCrtdll"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;hpj;bat;for;f90"
+# Begin Source File
+
+SOURCE=.\adler32.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_ADLER=\
+	".\zconf.h"\
+	".\zlib.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\compress.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_COMPR=\
+	".\zconf.h"\
+	".\zlib.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\crc32.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_CRC32=\
+	".\zconf.h"\
+	".\zlib.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\deflate.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_DEFLA=\
+	".\deflate.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\gvmat32c.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\gzio.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_GZIO_=\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\infblock.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFBL=\
+	".\infblock.h"\
+	".\infcodes.h"\
+	".\inftrees.h"\
+	".\infutil.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\infcodes.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFCO=\
+	".\infblock.h"\
+	".\infcodes.h"\
+	".\inffast.h"\
+	".\inftrees.h"\
+	".\infutil.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\inffast.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFFA=\
+	".\infblock.h"\
+	".\infcodes.h"\
+	".\inffast.h"\
+	".\inftrees.h"\
+	".\infutil.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\inflate.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFLA=\
+	".\infblock.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\inftrees.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFTR=\
+	".\inftrees.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\infutil.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFUT=\
+	".\infblock.h"\
+	".\infcodes.h"\
+	".\inftrees.h"\
+	".\infutil.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\trees.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_TREES=\
+	".\deflate.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\uncompr.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_UNCOM=\
+	".\zconf.h"\
+	".\zlib.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\unzip.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\zip.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\zlib.rc
+# End Source File
+# Begin Source File
+
+SOURCE=.\zlibvc.def
+# End Source File
+# Begin Source File
+
+SOURCE=.\zutil.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_ZUTIL=\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd"
+# Begin Source File
+
+SOURCE=.\deflate.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\infblock.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\infcodes.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\inffast.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\inftrees.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\infutil.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\zconf.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\zlib.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\zutil.h
+# End Source File
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project

contrib/minizip/zlibvc.dsw

@@ -0,0 +1,41 @@
+Microsoft Developer Studio Workspace File, Format Version 5.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "zlibstat"=.\zlibstat.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Project: "zlibvc"=.\zlibvc.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

contrib/untgz/Makefile

@@ -0,0 +1,14 @@
+CC=cc
+CFLAGS=-g
+
+untgz: untgz.o  ../../libz.a
+	$(CC) $(CFLAGS) -o untgz  untgz.o -L../.. -lz
+
+untgz.o: untgz.c ../../zlib.h
+	$(CC) $(CFLAGS) -c -I../.. untgz.c
+
+../../libz.a:
+	cd ../..; make
+
+clean:
+	rm -f untgz untgz.o *~

contrib/untgz/makefile.w32

@@ -0,0 +1,63 @@
+# Makefile for zlib.  Modified for mingw32
+# For conditions of distribution and use, see copyright notice in zlib.h 
+
+# To compile, 
+# 
+#   make -fmakefile.w32
+# 
+
+CC=gcc
+
+# Generate dependencies (see end of the file)
+
+CPPFLAGS=-MMD 
+
+#CFLAGS=-MMD -O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-MMD -g -DDEBUG
+CFLAGS=-O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+             -Wstrict-prototypes -Wmissing-prototypes
+
+# If cp.exe is not found, replace with copy /Y .
+CP=cp -f
+
+# The default value of RM is "rm -f."  
+# If "rm.exe" is not found, uncomment:
+# RM=del
+
+LD=gcc
+LDLIBS=-L. -lz
+LDFLAGS=-s
+
+
+INCL=zlib.h zconf.h
+LIBS=libz.a
+
+AR=ar rcs
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o \
+       inffast.o
+
+TEST_OBJS = minigzip.o untgz.o
+
+all: minigzip.exe untgz.exe
+
+rebuild:	clean	all
+
+libz.a: $(OBJS)
+	$(AR) $@ $(OBJS)
+
+%.exe : %.o $(LIBS)
+	$(LD) $(LDFLAGS) -o $@ $< $(LDLIBS)
+
+.PHONY : clean
+
+clean:
+	$(RM) *.d *.o *.exe libz.a foo.gz
+
+DEPS := $(wildcard *.d)
+ifneq ($(DEPS),)
+include $(DEPS)
+endif
+

contrib/untgz/untgz.c

@@ -0,0 +1,522 @@
+/*
+ * untgz.c -- Display contents and/or extract file from
+ * a gzip'd TAR file
+ * written by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+ * adaptation to Unix by Jean-loup Gailly <jloup@gzip.org>
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <errno.h>
+#include <fcntl.h>
+#ifdef unix
+# include <unistd.h>
+#else
+# include <direct.h>
+# include <io.h>
+#endif
+
+#include "zlib.h"
+
+#ifdef WIN32
+#  ifndef F_OK
+#    define F_OK (0)
+#  endif
+#  ifdef _MSC_VER
+#    define mkdir(dirname,mode) _mkdir(dirname)
+#    define strdup(str)         _strdup(str)
+#    define unlink(fn)          _unlink(fn)
+#    define access(path,mode)   _access(path,mode)
+#  else
+#    define mkdir(dirname,mode) _mkdir(dirname)
+#  endif
+#else
+#  include <utime.h>
+#endif
+
+
+/* Values used in typeflag field.  */
+
+#define REGTYPE	 '0'		/* regular file */
+#define AREGTYPE '\0'		/* regular file */
+#define LNKTYPE  '1'		/* link */
+#define SYMTYPE  '2'		/* reserved */
+#define CHRTYPE  '3'		/* character special */
+#define BLKTYPE  '4'		/* block special */
+#define DIRTYPE  '5'		/* directory */
+#define FIFOTYPE '6'		/* FIFO special */
+#define CONTTYPE '7'		/* reserved */
+
+#define BLOCKSIZE 512
+
+struct tar_header
+{				/* byte offset */
+  char name[100];		/*   0 */
+  char mode[8];			/* 100 */
+  char uid[8];			/* 108 */
+  char gid[8];			/* 116 */
+  char size[12];		/* 124 */
+  char mtime[12];		/* 136 */
+  char chksum[8];		/* 148 */
+  char typeflag;		/* 156 */
+  char linkname[100];		/* 157 */
+  char magic[6];		/* 257 */
+  char version[2];		/* 263 */
+  char uname[32];		/* 265 */
+  char gname[32];		/* 297 */
+  char devmajor[8];		/* 329 */
+  char devminor[8];		/* 337 */
+  char prefix[155];		/* 345 */
+				/* 500 */
+};
+
+union tar_buffer {
+  char               buffer[BLOCKSIZE];
+  struct tar_header  header;
+};
+
+enum { TGZ_EXTRACT = 0, TGZ_LIST };
+
+static char *TGZfname	OF((const char *));
+void TGZnotfound	OF((const char *));
+
+int getoct		OF((char *, int));
+char *strtime		OF((time_t *));
+int ExprMatch		OF((char *,char *));
+
+int makedir		OF((char *));
+int matchname		OF((int,int,char **,char *));
+
+void error		OF((const char *));
+int  tar		OF((gzFile, int, int, int, char **));
+
+void help		OF((int));
+int main		OF((int, char **));
+
+char *prog;
+
+/* This will give a benign warning */
+
+static char *TGZprefix[] = { "\0", ".tgz", ".tar.gz", ".tar", NULL };
+
+/* Return the real name of the TGZ archive */
+/* or NULL if it does not exist. */
+
+static char *TGZfname OF((const char *fname))
+{
+  static char buffer[1024];
+  int origlen,i;
+  
+  strcpy(buffer,fname);
+  origlen = strlen(buffer);
+
+  for (i=0; TGZprefix[i]; i++)
+    {
+       strcpy(buffer+origlen,TGZprefix[i]);
+       if (access(buffer,F_OK) == 0)
+         return buffer;
+    }
+  return NULL;
+}
+
+/* error message for the filename */
+
+void TGZnotfound OF((const char *fname))
+{
+  int i;
+
+  fprintf(stderr,"%s : couldn't find ",prog);
+  for (i=0;TGZprefix[i];i++)
+    fprintf(stderr,(TGZprefix[i+1]) ? "%s%s, " : "or %s%s\n",
+            fname,
+            TGZprefix[i]);
+  exit(1);
+}
+
+
+/* help functions */
+
+int getoct(char *p,int width)
+{
+  int result = 0;
+  char c;
+  
+  while (width --)
+    {
+      c = *p++;
+      if (c == ' ')
+	continue;
+      if (c == 0)
+	break;
+      result = result * 8 + (c - '0');
+    }
+  return result;
+}
+
+char *strtime (time_t *t)
+{
+  struct tm   *local;
+  static char result[32];
+
+  local = localtime(t);
+  sprintf(result,"%2d/%02d/%4d %02d:%02d:%02d",
+	  local->tm_mday, local->tm_mon+1, local->tm_year+1900,
+	  local->tm_hour, local->tm_min,   local->tm_sec);
+  return result;
+}
+
+
+/* regular expression matching */
+
+#define ISSPECIAL(c) (((c) == '*') || ((c) == '/'))
+
+int ExprMatch(char *string,char *expr)
+{
+  while (1)
+    {
+      if (ISSPECIAL(*expr))
+	{
+	  if (*expr == '/')
+	    {
+	      if (*string != '\\' && *string != '/')
+		return 0;
+	      string ++; expr++;
+	    }
+	  else if (*expr == '*')
+	    {
+	      if (*expr ++ == 0)
+		return 1;
+	      while (*++string != *expr)
+		if (*string == 0)
+		  return 0;
+	    }
+	}
+      else
+	{
+	  if (*string != *expr)
+	    return 0;
+	  if (*expr++ == 0)
+	    return 1;
+	  string++;
+	}
+    }
+}
+
+/* recursive make directory */
+/* abort if you get an ENOENT errno somewhere in the middle */
+/* e.g. ignore error "mkdir on existing directory" */
+/* */
+/* return 1 if OK */
+/*        0 on error */
+
+int makedir (char *newdir)
+{
+  char *buffer = strdup(newdir);
+  char *p;
+  int  len = strlen(buffer);
+  
+  if (len <= 0) {
+    free(buffer);
+    return 0;
+  }
+  if (buffer[len-1] == '/') {
+    buffer[len-1] = '\0';
+  }
+  if (mkdir(buffer, 0775) == 0)
+    {
+      free(buffer);
+      return 1;
+    }
+
+  p = buffer+1;
+  while (1)
+    {
+      char hold;
+      
+      while(*p && *p != '\\' && *p != '/')
+	p++;
+      hold = *p;
+      *p = 0;
+      if ((mkdir(buffer, 0775) == -1) && (errno == ENOENT))
+	{
+	  fprintf(stderr,"%s: couldn't create directory %s\n",prog,buffer);
+	  free(buffer);
+	  return 0;
+	}
+      if (hold == 0)
+	break;
+      *p++ = hold;
+    }
+  free(buffer);
+  return 1;
+}
+
+int matchname (int arg,int argc,char **argv,char *fname)
+{
+  if (arg == argc)		/* no arguments given (untgz tgzarchive) */
+    return 1;
+
+  while (arg < argc)
+    if (ExprMatch(fname,argv[arg++]))
+      return 1;
+
+  return 0; /* ignore this for the moment being */
+}
+
+
+/* Tar file list or extract */
+
+int tar (gzFile in,int action,int arg,int argc,char **argv)
+{
+  union  tar_buffer buffer;
+  int    len;
+  int    err;
+  int    getheader = 1;
+  int    remaining = 0;
+  FILE   *outfile = NULL;
+  char   fname[BLOCKSIZE];
+  time_t tartime;
+  
+  if (action == TGZ_LIST)
+    printf("     day      time     size                       file\n"
+	   " ---------- -------- --------- -------------------------------------\n");
+  while (1)
+    {
+      len = gzread(in, &buffer, BLOCKSIZE);
+      if (len < 0)
+	error (gzerror(in, &err));
+      /*
+       * Always expect complete blocks to process
+       * the tar information.
+       */
+      if (len != BLOCKSIZE)
+	error("gzread: incomplete block read");
+      
+      /*
+       * If we have to get a tar header
+       */
+      if (getheader == 1)
+	{
+	  /*
+	   * if we met the end of the tar
+	   * or the end-of-tar block,
+	   * we are done
+	   */
+	  if ((len == 0)  || (buffer.header.name[0]== 0)) break;
+
+	  tartime = (time_t)getoct(buffer.header.mtime,12);
+	  strcpy(fname,buffer.header.name);
+	  
+	  switch (buffer.header.typeflag)
+	    {
+	    case DIRTYPE:
+	      if (action == TGZ_LIST)
+		printf(" %s     <dir> %s\n",strtime(&tartime),fname);
+	      if (action == TGZ_EXTRACT)
+		makedir(fname);
+	      break;
+	    case REGTYPE:
+	    case AREGTYPE:
+	      remaining = getoct(buffer.header.size,12);
+	      if (action == TGZ_LIST)
+		printf(" %s %9d %s\n",strtime(&tartime),remaining,fname);
+	      if (action == TGZ_EXTRACT)
+		{
+		  if ((remaining) && (matchname(arg,argc,argv,fname)))
+		    {
+		      outfile = fopen(fname,"wb");
+		      if (outfile == NULL) {
+			/* try creating directory */
+			char *p = strrchr(fname, '/');
+			if (p != NULL) {
+			  *p = '\0';
+			  makedir(fname);
+			  *p = '/';
+			  outfile = fopen(fname,"wb");
+			}
+		      }
+		      fprintf(stderr,
+			      "%s %s\n",
+			      (outfile) ? "Extracting" : "Couldn't create",
+			      fname);
+		    }
+		  else
+		    outfile = NULL;
+		}
+	      /*
+	       * could have no contents
+	       */
+	      getheader = (remaining) ? 0 : 1;
+	      break;
+	    default:
+	      if (action == TGZ_LIST)
+		printf(" %s     <---> %s\n",strtime(&tartime),fname);
+	      break;
+	    }
+	}
+      else
+	{
+	  unsigned int bytes = (remaining > BLOCKSIZE) ? BLOCKSIZE : remaining;
+
+	  if ((action == TGZ_EXTRACT) && (outfile != NULL))
+	    {
+	      if (fwrite(&buffer,sizeof(char),bytes,outfile) != bytes)
+		{
+		  fprintf(stderr,"%s : error writing %s skipping...\n",prog,fname);
+		  fclose(outfile);
+		  unlink(fname);
+		}
+	    }
+	  remaining -= bytes;
+	  if (remaining == 0)
+	    {
+	      getheader = 1;
+	      if ((action == TGZ_EXTRACT) && (outfile != NULL))
+		{
+#ifdef WIN32
+		  HANDLE hFile;
+		  FILETIME ftm,ftLocal;
+		  SYSTEMTIME st;
+		  struct tm localt;
+ 
+		  fclose(outfile);
+
+		  localt = *localtime(&tartime);
+
+		  hFile = CreateFile(fname, GENERIC_READ | GENERIC_WRITE,
+				     0, NULL, OPEN_EXISTING, 0, NULL);
+		  
+		  st.wYear = (WORD)localt.tm_year+1900;
+		  st.wMonth = (WORD)localt.tm_mon;
+		  st.wDayOfWeek = (WORD)localt.tm_wday;
+		  st.wDay = (WORD)localt.tm_mday;
+		  st.wHour = (WORD)localt.tm_hour;
+		  st.wMinute = (WORD)localt.tm_min;
+		  st.wSecond = (WORD)localt.tm_sec;
+		  st.wMilliseconds = 0;
+		  SystemTimeToFileTime(&st,&ftLocal);
+		  LocalFileTimeToFileTime(&ftLocal,&ftm);
+		  SetFileTime(hFile,&ftm,NULL,&ftm);
+		  CloseHandle(hFile);
+
+		  outfile = NULL;
+#else
+		  struct utimbuf settime;
+
+		  settime.actime = settime.modtime = tartime;
+
+		  fclose(outfile);
+		  outfile = NULL;
+		  utime(fname,&settime);
+#endif
+		}
+	    }
+	}
+    }
+  
+  if (gzclose(in) != Z_OK)
+    error("failed gzclose");
+
+  return 0;
+}
+
+
+/* =========================================================== */
+
+void help(int exitval)
+{
+  fprintf(stderr,
+	  "untgz v 0.1\n"
+	  " an sample application of zlib 1.0.4\n\n"
+          "Usage : untgz TGZfile            to extract all files\n"
+          "        untgz TGZfile fname ...  to extract selected files\n"
+          "        untgz -l TGZfile         to list archive contents\n"
+          "        untgz -h                 to display this help\n\n");
+  exit(exitval);
+}
+
+void error(const char *msg)
+{
+    fprintf(stderr, "%s: %s\n", prog, msg);
+    exit(1);
+}
+
+
+/* ====================================================================== */
+
+int _CRT_glob = 0;	/* disable globbing of the arguments */
+
+int main(int argc,char **argv)
+{
+    int 	action = TGZ_EXTRACT;
+    int 	arg = 1;
+    char	*TGZfile;
+    gzFile	*f;
+    
+
+    prog = strrchr(argv[0],'\\');
+    if (prog == NULL)
+      {
+	prog = strrchr(argv[0],'/');
+	if (prog == NULL)
+	  {
+	    prog = strrchr(argv[0],':');
+	    if (prog == NULL)
+	      prog = argv[0];
+	    else
+	      prog++;
+	  }
+	else
+	  prog++;
+      }
+    else
+      prog++;
+    
+    if (argc == 1)
+      help(0);
+
+    if (strcmp(argv[arg],"-l") == 0)
+      {
+	action = TGZ_LIST;
+	if (argc == ++arg)
+	  help(0);
+      }
+    else if (strcmp(argv[arg],"-h") == 0)
+      {
+	help(0);
+      }
+
+    if ((TGZfile = TGZfname(argv[arg])) == NULL)
+      TGZnotfound(argv[arg]);            
+
+    ++arg;
+    if ((action == TGZ_LIST) && (arg != argc))
+      help(1);
+
+/*
+ *  Process the TGZ file
+ */
+    switch(action)
+      {
+      case TGZ_LIST:
+      case TGZ_EXTRACT:
+	f = gzopen(TGZfile,"rb");
+	if (f == NULL)
+	  {
+	    fprintf(stderr,"%s: Couldn't gzopen %s\n",
+		    prog,
+		    TGZfile);
+	    return 1;
+	  }
+	exit(tar(f, action, arg, argc, argv));
+      break;
+	
+      default:
+	error("Unknown option!");
+	exit(1);
+      }
+
+    return 0;
+}

contrib/visual-basic.txt

@@ -0,0 +1,69 @@
+See below some functions declarations for Visual Basic.
+
+Frequently Asked Question:
+
+Q: Each time I use the compress function I get the -5 error (not enough
+   room in the output buffer).
+
+A: Make sure that the length of the compressed buffer is passed by
+   reference ("as any"), not by value ("as long"). Also check that
+   before the call of compress this length is equal to the total size of
+   the compressed buffer and not zero.
+
+
+From: "Jon Caruana" <jon-net@usa.net>
+Subject: Re: How to port zlib declares to vb?
+Date: Mon, 28 Oct 1996 18:33:03 -0600
+
+Got the answer! (I haven't had time to check this but it's what I got, and
+looks correct):
+
+He has the following routines working:
+        compress
+        uncompress
+        gzopen
+        gzwrite
+        gzread
+        gzclose
+
+Declares follow: (Quoted from Carlos Rios <c_rios@sonda.cl>, in Vb4 form)
+
+#If Win16 Then   'Use Win16 calls.
+Declare Function compress Lib "ZLIB.DLL" (ByVal compr As
+        String, comprLen As Any, ByVal buf As String, ByVal buflen
+        As Long) As Integer
+Declare Function uncompress Lib "ZLIB.DLL" (ByVal uncompr
+        As String, uncomprLen As Any, ByVal compr As String, ByVal
+        lcompr As Long) As Integer
+Declare Function gzopen Lib "ZLIB.DLL" (ByVal filePath As
+        String, ByVal mode As String) As Long
+Declare Function gzread Lib "ZLIB.DLL" (ByVal file As
+        Long, ByVal uncompr As String, ByVal uncomprLen As Integer)
+        As Integer
+Declare Function gzwrite Lib "ZLIB.DLL" (ByVal file As
+        Long, ByVal uncompr As String, ByVal uncomprLen As Integer)
+        As Integer
+Declare Function gzclose Lib "ZLIB.DLL" (ByVal file As
+        Long) As Integer
+#Else
+Declare Function compress Lib "ZLIB32.DLL"
+        (ByVal compr As String, comprLen As Any, ByVal buf As
+        String, ByVal buflen As Long) As Integer
+Declare Function uncompress Lib "ZLIB32.DLL"
+        (ByVal uncompr As String, uncomprLen As Any, ByVal compr As
+        String, ByVal lcompr As Long) As Long
+Declare Function gzopen Lib "ZLIB32.DLL"
+        (ByVal file As String, ByVal mode As String) As Long
+Declare Function gzread Lib "ZLIB32.DLL"
+        (ByVal file As Long, ByVal uncompr As String, ByVal
+        uncomprLen As Long) As Long
+Declare Function gzwrite Lib "ZLIB32.DLL"
+        (ByVal file As Long, ByVal uncompr As String, ByVal
+        uncomprLen As Long) As Long
+Declare Function gzclose Lib "ZLIB32.DLL"
+        (ByVal file As Long) As Long
+#End If
+
+-Jon Caruana
+jon-net@usa.net
+Microsoft Sitebuilder Network Level 1 Member - HTML Writer's Guild Member

crc32.c

@@ -1,32 +1,62 @@
 /* crc32.c -- compute the CRC-32 of a data stream
- * Copyright (C) 1995 Mark Adler
+ * Copyright (C) 1995-1998 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
-/* $Id: crc32.c,v 1.4 1995/04/14 14:55:12 jloup Exp $ */
+/* @(#) $Id$ */
 
 #include "zlib.h"
 
 #define local static
 
 #ifdef DYNAMIC_CRC_TABLE
-/* =========================================================================
- * Make the crc table. This function is needed only if you want to compute
- * the table dynamically.
- */
-local int crc_table_empty = 1;
-local uLong crc_table[256];
 
+local int crc_table_empty = 1;
+local uLongf crc_table[256];
+local void make_crc_table OF((void));
+
+/*
+  Generate a table for a byte-wise 32-bit CRC calculation on the polynomial:
+  x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.
+
+  Polynomials over GF(2) are represented in binary, one bit per coefficient,
+  with the lowest powers in the most significant bit.  Then adding polynomials
+  is just exclusive-or, and multiplying a polynomial by x is a right shift by
+  one.  If we call the above polynomial p, and represent a byte as the
+  polynomial q, also with the lowest power in the most significant bit (so the
+  byte 0xb1 is the polynomial x^7+x^3+x+1), then the CRC is (q*x^32) mod p,
+  where a mod b means the remainder after dividing a by b.
+
+  This calculation is done using the shift-register method of multiplying and
+  taking the remainder.  The register is initialized to zero, and for each
+  incoming bit, x^32 is added mod p to the register if the bit is a one (where
+  x^32 mod p is p+x^32 = x^26+...+1), and the register is multiplied mod p by
+  x (which is shifting right by one and adding x^32 mod p if the bit shifted
+  out is a one).  We start with the highest power (least significant bit) of
+  q and repeat for all eight bits of q.
+
+  The table is simply the CRC of all possible eight bit values.  This is all
+  the information needed to generate CRC's on data a byte at a time for all
+  combinations of CRC register values and incoming bytes.
+*/
 local void make_crc_table()
 {
   uLong c;
   int n, k;
+  uLong poly;            /* polynomial exclusive-or pattern */
+  /* terms of polynomial defining this crc (except x^32): */
+  static const Byte p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
+
+  /* make exclusive-or pattern from polynomial (0xedb88320L) */
+  poly = 0L;
+  for (n = 0; n < sizeof(p)/sizeof(Byte); n++)
+    poly |= 1L << (31 - p[n]);
  
   for (n = 0; n < 256; n++)
   {
     c = (uLong)n;
     for (k = 0; k < 8; k++)
-      c = c & 1 ? 0xedb88320L ^ (c >> 1) : c >> 1;
+      c = c & 1 ? poly ^ (c >> 1) : c >> 1;
     crc_table[n] = c;
   }
   crc_table_empty = 0;
@@ -35,7 +65,7 @@ local void make_crc_table()
 /* ========================================================================
  * Table of CRC-32's of all single-byte values (made by make_crc_table)
  */
-local uLong crc_table[] = {
+local const uLongf crc_table[256] = {
   0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L,
   0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L,
   0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L,
@@ -91,15 +121,27 @@ local uLong crc_table[] = {
 };
 #endif
 
+/* =========================================================================
+ * This function can be used by asm versions of crc32()
+ */
+const uLongf * ZEXPORT get_crc_table()
+{
+#ifdef DYNAMIC_CRC_TABLE
+  if (crc_table_empty) make_crc_table();
+#endif
+  return (const uLongf *)crc_table;
+}
+
+/* ========================================================================= */
 #define DO1(buf) crc = crc_table[((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8);
 #define DO2(buf)  DO1(buf); DO1(buf);
 #define DO4(buf)  DO2(buf); DO2(buf);
 #define DO8(buf)  DO4(buf); DO4(buf);
 
 /* ========================================================================= */
-uLong crc32(crc, buf, len)
+uLong ZEXPORT crc32(crc, buf, len)
     uLong crc;
-    Bytef *buf;
+    const Bytef *buf;
     uInt len;
 {
     if (buf == Z_NULL) return 0L;

deflate.h

@@ -1,5 +1,5 @@
 /* deflate.h -- internal compression state
- * Copyright (C) 1995 Jean-loup Gailly
+ * Copyright (C) 1995-1998 Jean-loup Gailly
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -8,7 +8,10 @@
    subject to change. Applications should only use zlib.h.
  */
 
-/* $Id: deflate.h,v 1.5 1995/05/03 17:27:09 jloup Exp $ */
+/* @(#) $Id$ */
+
+#ifndef _DEFLATE_H
+#define _DEFLATE_H
 
 #include "zutil.h"
 
@@ -16,11 +19,6 @@
  * Internal compression state.
  */
 
-/* Data type */
-#define BINARY  0
-#define ASCII   1
-#define UNKNOWN 2
-
 #define LENGTH_CODES 29
 /* number of length codes, not counting the special END_BLOCK code */
 
@@ -82,12 +80,12 @@ typedef unsigned IPos;
  */
 
 typedef struct internal_state {
-    z_stream *strm;      /* pointer back to this zlib stream */
+    z_streamp strm;      /* pointer back to this zlib stream */
     int   status;        /* as the name implies */
     Bytef *pending_buf;  /* output still pending */
+    ulg   pending_buf_size; /* size of pending_buf */
     Bytef *pending_out;  /* next pending byte to output to the stream */
     int   pending;       /* nb of bytes in the pending buffer */
-    uLong adler;         /* adler32 of uncompressed data */
     int   noheader;      /* suppress zlib header and adler32 */
     Byte  data_type;     /* UNKNOWN, BINARY or ASCII */
     Byte  method;        /* STORED (for zip only) or DEFLATED */
@@ -232,12 +230,12 @@ typedef struct internal_state {
 
     ulg opt_len;        /* bit length of current block with optimal trees */
     ulg static_len;     /* bit length of current block with static trees */
-    ulg compressed_len; /* total bit length of compressed file */
     uInt matches;       /* number of string matches in current block */
     int last_eob_len;   /* bit length of EOB code for last block */
 
 #ifdef DEBUG
-    ulg bits_sent;      /* bit length of the compressed data */
+    ulg compressed_len; /* total bit length of compressed file mod 2^32 */
+    ulg bits_sent;      /* bit length of compressed data sent mod 2^32 */
 #endif
 
     ush bi_buf;
@@ -268,9 +266,53 @@ typedef struct internal_state {
  */
 
         /* in trees.c */
-void tr_init      OF((deflate_state *s));
+void _tr_init         OF((deflate_state *s));
-int  tr_tally      OF((deflate_state *s, int dist, int lc));
+int  _tr_tally        OF((deflate_state *s, unsigned dist, unsigned lc));
-ulg tr_flush_block OF((deflate_state *s, charf *buf, ulg stored_len, int eof));
+void _tr_flush_block  OF((deflate_state *s, charf *buf, ulg stored_len,
-void tr_align      OF((deflate_state *s));
+			  int eof));
-void tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
+void _tr_align        OF((deflate_state *s));
-                         int eof));
+void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
+                          int eof));
+
+#define d_code(dist) \
+   ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
+/* Mapping from a distance to a distance code. dist is the distance - 1 and
+ * must not have side effects. _dist_code[256] and _dist_code[257] are never
+ * used.
+ */
+
+#ifndef DEBUG
+/* Inline versions of _tr_tally for speed: */
+
+#if defined(GEN_TREES_H) || !defined(STDC)
+  extern uch _length_code[];
+  extern uch _dist_code[];
+#else
+  extern const uch _length_code[];
+  extern const uch _dist_code[];
+#endif
+
+# define _tr_tally_lit(s, c, flush) \
+  { uch cc = (c); \
+    s->d_buf[s->last_lit] = 0; \
+    s->l_buf[s->last_lit++] = cc; \
+    s->dyn_ltree[cc].Freq++; \
+    flush = (s->last_lit == s->lit_bufsize-1); \
+   }
+# define _tr_tally_dist(s, distance, length, flush) \
+  { uch len = (length); \
+    ush dist = (distance); \
+    s->d_buf[s->last_lit] = dist; \
+    s->l_buf[s->last_lit++] = len; \
+    dist--; \
+    s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \
+    s->dyn_dtree[d_code(dist)].Freq++; \
+    flush = (s->last_lit == s->lit_bufsize-1); \
+  }
+#else
+# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c)
+# define _tr_tally_dist(s, distance, length, flush) \
+              flush = _tr_tally(s, distance, length) 
+#endif
+
+#endif

example.c

@@ -1,9 +1,9 @@
 /* example.c -- usage example of the zlib compression library
- * Copyright (C) 1995 Jean-loup Gailly.
+ * Copyright (C) 1995-1998 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
-/* $Id: example.c,v 1.9 1995/05/03 17:27:09 jloup Exp $ */
+/* @(#) $Id$ */
 
 #include <stdio.h>
 #include "zlib.h"
@@ -15,6 +15,12 @@
    extern void exit  OF((int));
 #endif
 
+#if defined(VMS) || defined(RISCOS)
+#  define TESTFILE "foo-gz"
+#else
+#  define TESTFILE "foo.gz"
+#endif
+
 #define CHECK_ERR(err, msg) { \
     if (err != Z_OK) { \
         fprintf(stderr, "%s error: %d\n", msg, err); \
@@ -22,38 +28,44 @@
     } \
 }
 
-char *hello = "hello, hello!";
+const char hello[] = "hello, hello!";
 /* "hello world" would be more standard, but the repeated "hello"
  * stresses the compression code better, sorry...
  */
 
-void test_compress      OF((Bytef *compr, uLong comprLen,
+const char dictionary[] = "hello";
-		            Bytef *uncompr, uLong uncomprLen));
+uLong dictId; /* Adler32 value of the dictionary */
-void test_gzio          OF((char *out, char *in, 
+
-		            Bytef *uncompr, int uncomprLen));
+void test_compress      OF((Byte *compr, uLong comprLen,
-void test_deflate       OF((Bytef *compr, uLong comprLen));
+		            Byte *uncompr, uLong uncomprLen));
-void test_inflate       OF((Bytef *compr, uLong comprLen,
+void test_gzio          OF((const char *out, const char *in, 
-		            Bytef *uncompr, uLong uncomprLen));
+		            Byte *uncompr, int uncomprLen));
-void test_large_deflate OF((Bytef *compr, uLong comprLen,
+void test_deflate       OF((Byte *compr, uLong comprLen));
-		            Bytef *uncompr, uLong uncomprLen));
+void test_inflate       OF((Byte *compr, uLong comprLen,
-void test_large_inflate OF((Bytef *compr, uLong comprLen,
+		            Byte *uncompr, uLong uncomprLen));
-		            Bytef *uncompr, uLong uncomprLen));
+void test_large_deflate OF((Byte *compr, uLong comprLen,
-void test_flush         OF((Bytef *compr, uLong comprLen));
+		            Byte *uncompr, uLong uncomprLen));
-void test_sync          OF((Bytef *compr, uLong comprLen,
+void test_large_inflate OF((Byte *compr, uLong comprLen,
-		            Bytef *uncompr, uLong uncomprLen));
+		            Byte *uncompr, uLong uncomprLen));
+void test_flush         OF((Byte *compr, uLong *comprLen));
+void test_sync          OF((Byte *compr, uLong comprLen,
+		            Byte *uncompr, uLong uncomprLen));
+void test_dict_deflate  OF((Byte *compr, uLong comprLen));
+void test_dict_inflate  OF((Byte *compr, uLong comprLen,
+		            Byte *uncompr, uLong uncomprLen));
 int  main               OF((int argc, char *argv[]));
 
 /* ===========================================================================
  * Test compress() and uncompress()
  */
 void test_compress(compr, comprLen, uncompr, uncomprLen)
-    Bytef *compr, *uncompr;
+    Byte *compr, *uncompr;
     uLong comprLen, uncomprLen;
 {
     int err;
     uLong len = strlen(hello)+1;
 
-    err = compress(compr, &comprLen, (Byte*)hello, len);
+    err = compress(compr, &comprLen, (const Bytef*)hello, len);
     CHECK_ERR(err, "compress");
 
     strcpy((char*)uncompr, "garbage");
@@ -63,8 +75,9 @@ void test_compress(compr, comprLen, uncompr, uncomprLen)
 
     if (strcmp((char*)uncompr, hello)) {
         fprintf(stderr, "bad uncompress\n");
+	exit(1);
     } else {
-        printf("uncompress(): %s\n", uncompr);
+        printf("uncompress(): %s\n", (char *)uncompr);
     }
 }
 
@@ -72,24 +85,31 @@ void test_compress(compr, comprLen, uncompr, uncomprLen)
  * Test read/write of .gz files
  */
 void test_gzio(out, in, uncompr, uncomprLen)
-    char *out; /* output file */
+    const char *out; /* compressed output file */
-    char *in;  /* input file */
+    const char *in;  /* compressed input file */
-    Bytef *uncompr;
+    Byte *uncompr;
     int  uncomprLen;
 {
     int err;
     int len = strlen(hello)+1;
     gzFile file;
+    z_off_t pos;
 
     file = gzopen(out, "wb");
     if (file == NULL) {
         fprintf(stderr, "gzopen error\n");
         exit(1);
     }
-
+    gzputc(file, 'h');
-    if (gzwrite(file, hello, len) != len) {
+    if (gzputs(file, "ello") != 4) {
-        fprintf(stderr, "gzwrite err: %s\n", gzerror(file, &err));
+        fprintf(stderr, "gzputs err: %s\n", gzerror(file, &err));
+	exit(1);
     }
+    if (gzprintf(file, ", %s!", "hello") != 8) {
+        fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err));
+	exit(1);
+    }
+    gzseek(file, 1L, SEEK_CUR); /* add one zero byte */
     gzclose(file);
 
     file = gzopen(in, "rb");
@@ -98,24 +118,51 @@ void test_gzio(out, in, uncompr, uncomprLen)
     }
     strcpy((char*)uncompr, "garbage");
 
-    uncomprLen = gzread(file, uncompr, uncomprLen);
+    uncomprLen = gzread(file, uncompr, (unsigned)uncomprLen);
     if (uncomprLen != len) {
         fprintf(stderr, "gzread err: %s\n", gzerror(file, &err));
+	exit(1);
     }
-    gzclose(file);
-
     if (strcmp((char*)uncompr, hello)) {
-        fprintf(stderr, "bad gzread\n");
+        fprintf(stderr, "bad gzread: %s\n", (char*)uncompr);
+	exit(1);
     } else {
-        printf("gzread(): %s\n", uncompr);
+        printf("gzread(): %s\n", (char *)uncompr);
     }
+
+    pos = gzseek(file, -8L, SEEK_CUR);
+    if (pos != 6 || gztell(file) != pos) {
+	fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n",
+		(long)pos, (long)gztell(file));
+	exit(1);
+    }
+
+    if (gzgetc(file) != ' ') {
+	fprintf(stderr, "gzgetc error\n");
+	exit(1);
+    }
+
+    gzgets(file, (char*)uncompr, uncomprLen);
+    uncomprLen = strlen((char*)uncompr);
+    if (uncomprLen != 6) { /* "hello!" */
+        fprintf(stderr, "gzgets err after gzseek: %s\n", gzerror(file, &err));
+	exit(1);
+    }
+    if (strcmp((char*)uncompr, hello+7)) {
+        fprintf(stderr, "bad gzgets after gzseek\n");
+	exit(1);
+    } else {
+        printf("gzgets() after gzseek: %s\n", (char *)uncompr);
+    }
+
+    gzclose(file);
 }
 
 /* ===========================================================================
  * Test deflate() with small buffers
  */
 void test_deflate(compr, comprLen)
-    Bytef *compr;
+    Byte *compr;
     uLong comprLen;
 {
     z_stream c_stream; /* compression stream */
@@ -153,7 +200,7 @@ void test_deflate(compr, comprLen)
  * Test inflate() with small buffers
  */
 void test_inflate(compr, comprLen, uncompr, uncomprLen)
-    Bytef *compr, *uncompr;
+    Byte *compr, *uncompr;
     uLong comprLen, uncomprLen;
 {
     int err;
@@ -165,13 +212,14 @@ void test_inflate(compr, comprLen, uncompr, uncomprLen)
     d_stream.zfree = (free_func)0;
     d_stream.opaque = (voidpf)0;
 
+    d_stream.next_in  = compr;
+    d_stream.avail_in = 0;
+    d_stream.next_out = uncompr;
+
     err = inflateInit(&d_stream);
     CHECK_ERR(err, "inflateInit");
 
-    d_stream.next_in  = compr;
+    while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) {
-    d_stream.next_out = uncompr;
-
-    while (d_stream.total_out < uncomprLen) {
         d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */
         err = inflate(&d_stream, Z_NO_FLUSH);
         if (err == Z_STREAM_END) break;
@@ -183,8 +231,9 @@ void test_inflate(compr, comprLen, uncompr, uncomprLen)
 
     if (strcmp((char*)uncompr, hello)) {
         fprintf(stderr, "bad inflate\n");
+	exit(1);
     } else {
-        printf("inflate(): %s\n", uncompr);
+        printf("inflate(): %s\n", (char *)uncompr);
     }
 }
 
@@ -192,7 +241,7 @@ void test_inflate(compr, comprLen, uncompr, uncomprLen)
  * Test deflate() with large buffers and dynamic change of compression level
  */
 void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
-    Bytef *compr, *uncompr;
+    Byte *compr, *uncompr;
     uLong comprLen, uncomprLen;
 {
     z_stream c_stream; /* compression stream */
@@ -206,7 +255,7 @@ void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
     CHECK_ERR(err, "deflateInit");
 
     c_stream.next_out = compr;
-    c_stream.avail_out = comprLen;
+    c_stream.avail_out = (uInt)comprLen;
 
     /* At this point, uncompr is still mostly zeroes, so it should compress
      * very well:
@@ -217,6 +266,7 @@ void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
     CHECK_ERR(err, "deflate");
     if (c_stream.avail_in != 0) {
         fprintf(stderr, "deflate not greedy\n");
+	exit(1);
     }
 
     /* Feed in already compressed data and switch to no compression: */
@@ -236,6 +286,7 @@ void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
     err = deflate(&c_stream, Z_FINISH);
     if (err != Z_STREAM_END) {
         fprintf(stderr, "deflate should report Z_STREAM_END\n");
+	exit(1);
     }
     err = deflateEnd(&c_stream);
     CHECK_ERR(err, "deflateEnd");
@@ -245,7 +296,7 @@ void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
  * Test inflate() with large buffers
  */
 void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
-    Bytef *compr, *uncompr;
+    Byte *compr, *uncompr;
     uLong comprLen, uncomprLen;
 {
     int err;
@@ -257,15 +308,15 @@ void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
     d_stream.zfree = (free_func)0;
     d_stream.opaque = (voidpf)0;
 
-    err = inflateInit(&d_stream);
-    CHECK_ERR(err, "inflateInit");
-
     d_stream.next_in  = compr;
     d_stream.avail_in = (uInt)comprLen;
 
+    err = inflateInit(&d_stream);
+    CHECK_ERR(err, "inflateInit");
+
     for (;;) {
         d_stream.next_out = uncompr;            /* discard the output */
-	d_stream.avail_out = uncomprLen;
+	d_stream.avail_out = (uInt)uncomprLen;
         err = inflate(&d_stream, Z_NO_FLUSH);
         if (err == Z_STREAM_END) break;
         CHECK_ERR(err, "large inflate");
@@ -276,6 +327,7 @@ void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
 
     if (d_stream.total_out != 2*uncomprLen + comprLen/2) {
         fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out);
+	exit(1);
     } else {
         printf("large_inflate(): OK\n");
     }
@@ -285,8 +337,8 @@ void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
  * Test deflate() with full flush
  */
 void test_flush(compr, comprLen)
-    Bytef *compr;
+    Byte *compr;
-    uLong comprLen;
+    uLong *comprLen;
 {
     z_stream c_stream; /* compression stream */
     int err;
@@ -302,7 +354,7 @@ void test_flush(compr, comprLen)
     c_stream.next_in  = (Bytef*)hello;
     c_stream.next_out = compr;
     c_stream.avail_in = 3;
-    c_stream.avail_out = (uInt)comprLen;
+    c_stream.avail_out = (uInt)*comprLen;
     err = deflate(&c_stream, Z_FULL_FLUSH);
     CHECK_ERR(err, "deflate");
 
@@ -315,13 +367,15 @@ void test_flush(compr, comprLen)
     }
     err = deflateEnd(&c_stream);
     CHECK_ERR(err, "deflateEnd");
+
+    *comprLen = c_stream.total_out;
 }
 
 /* ===========================================================================
  * Test inflateSync()
  */
 void test_sync(compr, comprLen, uncompr, uncomprLen)
-    Bytef *compr, *uncompr;
+    Byte *compr, *uncompr;
     uLong comprLen, uncomprLen;
 {
     int err;
@@ -333,18 +387,19 @@ void test_sync(compr, comprLen, uncompr, uncomprLen)
     d_stream.zfree = (free_func)0;
     d_stream.opaque = (voidpf)0;
 
+    d_stream.next_in  = compr;
+    d_stream.avail_in = 2; /* just read the zlib header */
+
     err = inflateInit(&d_stream);
     CHECK_ERR(err, "inflateInit");
 
-    d_stream.next_in  = compr;
     d_stream.next_out = uncompr;
-    d_stream.avail_in = 2; /* just read the zlib header */
     d_stream.avail_out = (uInt)uncomprLen;
 
     inflate(&d_stream, Z_NO_FLUSH);
     CHECK_ERR(err, "inflate");
 
-    d_stream.avail_in = (uInt)uncomprLen-2; /* read all compressed data */
+    d_stream.avail_in = (uInt)comprLen-2;   /* read all compressed data */
     err = inflateSync(&d_stream);           /* but skip the damaged part */
     CHECK_ERR(err, "inflateSync");
 
@@ -352,11 +407,99 @@ void test_sync(compr, comprLen, uncompr, uncomprLen)
     if (err != Z_DATA_ERROR) {
         fprintf(stderr, "inflate should report DATA_ERROR\n");
         /* Because of incorrect adler32 */
+	exit(1);
     }
     err = inflateEnd(&d_stream);
     CHECK_ERR(err, "inflateEnd");
 
-    printf("after inflateSync(): hel%s\n", uncompr);
+    printf("after inflateSync(): hel%s\n", (char *)uncompr);
+}
+
+/* ===========================================================================
+ * Test deflate() with preset dictionary
+ */
+void test_dict_deflate(compr, comprLen)
+    Byte *compr;
+    uLong comprLen;
+{
+    z_stream c_stream; /* compression stream */
+    int err;
+
+    c_stream.zalloc = (alloc_func)0;
+    c_stream.zfree = (free_func)0;
+    c_stream.opaque = (voidpf)0;
+
+    err = deflateInit(&c_stream, Z_BEST_COMPRESSION);
+    CHECK_ERR(err, "deflateInit");
+
+    err = deflateSetDictionary(&c_stream,
+			       (const Bytef*)dictionary, sizeof(dictionary));
+    CHECK_ERR(err, "deflateSetDictionary");
+
+    dictId = c_stream.adler;
+    c_stream.next_out = compr;
+    c_stream.avail_out = (uInt)comprLen;
+
+    c_stream.next_in = (Bytef*)hello;
+    c_stream.avail_in = (uInt)strlen(hello)+1;
+
+    err = deflate(&c_stream, Z_FINISH);
+    if (err != Z_STREAM_END) {
+        fprintf(stderr, "deflate should report Z_STREAM_END\n");
+	exit(1);
+    }
+    err = deflateEnd(&c_stream);
+    CHECK_ERR(err, "deflateEnd");
+}
+
+/* ===========================================================================
+ * Test inflate() with a preset dictionary
+ */
+void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
+    Byte *compr, *uncompr;
+    uLong comprLen, uncomprLen;
+{
+    int err;
+    z_stream d_stream; /* decompression stream */
+
+    strcpy((char*)uncompr, "garbage");
+
+    d_stream.zalloc = (alloc_func)0;
+    d_stream.zfree = (free_func)0;
+    d_stream.opaque = (voidpf)0;
+
+    d_stream.next_in  = compr;
+    d_stream.avail_in = (uInt)comprLen;
+
+    err = inflateInit(&d_stream);
+    CHECK_ERR(err, "inflateInit");
+
+    d_stream.next_out = uncompr;
+    d_stream.avail_out = (uInt)uncomprLen;
+
+    for (;;) {
+        err = inflate(&d_stream, Z_NO_FLUSH);
+        if (err == Z_STREAM_END) break;
+	if (err == Z_NEED_DICT) {
+	    if (d_stream.adler != dictId) {
+		fprintf(stderr, "unexpected dictionary");
+		exit(1);
+	    }
+	    err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary,
+				       sizeof(dictionary));
+	}
+        CHECK_ERR(err, "inflate with dict");
+    }
+
+    err = inflateEnd(&d_stream);
+    CHECK_ERR(err, "inflateEnd");
+
+    if (strcmp((char*)uncompr, hello)) {
+        fprintf(stderr, "bad inflate with dict\n");
+	exit(1);
+    } else {
+        printf("inflate with dictionary: %s\n", (char *)uncompr);
+    }
 }
 
 /* ===========================================================================
@@ -367,29 +510,32 @@ int main(argc, argv)
     int argc;
     char *argv[];
 {
-    Bytef *compr, *uncompr;
+    Byte *compr, *uncompr;
-    uLong comprLen = 32750*sizeof(int); /* don't overflow on MSDOS */
+    uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */
     uLong uncomprLen = comprLen;
+    static const char* myVersion = ZLIB_VERSION;
 
-    if (zlib_version[0] != ZLIB_VERSION[0]) {
+    if (zlibVersion()[0] != myVersion[0]) {
         fprintf(stderr, "incompatible zlib version\n");
         exit(1);
 
-    } else if (strcmp(zlib_version, ZLIB_VERSION) != 0) {
+    } else if (strcmp(zlibVersion(), ZLIB_VERSION) != 0) {
         fprintf(stderr, "warning: different zlib version\n");
     }
 
-    compr    = (Bytef*)malloc(comprLen);
+    compr    = (Byte*)calloc((uInt)comprLen, 1);
-    uncompr  = (Bytef*)calloc(uncomprLen, 1); /* must be cleared initially */
+    uncompr  = (Byte*)calloc((uInt)uncomprLen, 1);
+    /* compr and uncompr are cleared to avoid reading uninitialized
+     * data and to ensure that uncompr compresses well.
+     */
     if (compr == Z_NULL || uncompr == Z_NULL) {
         printf("out of memory\n");
 	exit(1);
     }
-
     test_compress(compr, comprLen, uncompr, uncomprLen);
 
-    test_gzio((argc > 1 ? argv[1] : "foo.gz"),
+    test_gzio((argc > 1 ? argv[1] : TESTFILE),
-              (argc > 2 ? argv[2] : "foo.gz"),
+              (argc > 2 ? argv[2] : TESTFILE),
 	      uncompr, (int)uncomprLen);
 
     test_deflate(compr, comprLen);
@@ -398,8 +544,12 @@ int main(argc, argv)
     test_large_deflate(compr, comprLen, uncompr, uncomprLen);
     test_large_inflate(compr, comprLen, uncompr, uncomprLen);
 
-    test_flush(compr, comprLen);
+    test_flush(compr, &comprLen);
     test_sync(compr, comprLen, uncompr, uncomprLen);
+    comprLen = uncomprLen;
+
+    test_dict_deflate(compr, comprLen);
+    test_dict_inflate(compr, comprLen, uncompr, uncomprLen);
 
     exit(0);
     return 0; /* to avoid warning */

gzio.c

@@ -1,9 +1,11 @@
 /* gzio.c -- IO on .gz files
- * Copyright (C) 1995 Jean-loup Gailly.
+ * Copyright (C) 1995-1998 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Compile this file with -DNO_DEFLATE to avoid the compression code.
  */
 
-/* $Id: gzio.c,v 1.8 1995/05/03 17:27:09 jloup Exp $ */
+/* @(#) $Id$ */
 
 #include <stdio.h>
 
@@ -11,13 +13,21 @@
 
 struct internal_state {int dummy;}; /* for buggy compilers */
 
-#define Z_BUFSIZE 4096
+#ifndef Z_BUFSIZE
+#  ifdef MAXSEG_64K
+#    define Z_BUFSIZE 4096 /* minimize memory usage for 16-bit DOS */
+#  else
+#    define Z_BUFSIZE 16384
+#  endif
+#endif
+#ifndef Z_PRINTF_BUFSIZE
+#  define Z_PRINTF_BUFSIZE 4096
+#endif
 
 #define ALLOC(size) malloc(size)
 #define TRYFREE(p) {if (p) free(p);}
 
-#define GZ_MAGIC_1 0x1f
+static int gz_magic[2] = {0x1f, 0x8b}; /* gzip magic header */
-#define GZ_MAGIC_2 0x8b
 
 /* gzip flag byte */
 #define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
@@ -27,10 +37,6 @@ struct internal_state {int dummy;}; /* for buggy compilers */
 #define COMMENT      0x10 /* bit 4 set: file comment present */
 #define RESERVED     0xE0 /* bits 5..7: reserved */
 
-#ifndef SEEK_CUR
-#  define SEEK_CUR 1
-#endif
-
 typedef struct gz_stream {
     z_stream stream;
     int      z_err;   /* error code for last stream operation */
@@ -43,43 +49,17 @@ typedef struct gz_stream {
     char     *path;   /* path name for debugging only */
     int      transparent; /* 1 if input file is not a .gz file */
     char     mode;    /* 'w' or 'r' */
+    long     startpos; /* start of compressed data in file (header skipped) */
 } gz_stream;
 
 
-local int    destroy OF((gz_stream *s));
+local gzFile gz_open      OF((const char *path, const char *mode, int  fd));
-local gzFile gz_open OF((char *path, char *mode, int  fd));
+local int do_flush        OF((gzFile file, int flush));
-local void   putLong OF((FILE *file, uLong x));
+local int    get_byte     OF((gz_stream *s));
-local uLong  getLong OF((Bytef *buf));
+local void   check_header OF((gz_stream *s));
-
+local int    destroy      OF((gz_stream *s));
- /* ===========================================================================
+local void   putLong      OF((FILE *file, uLong x));
- * Cleanup then free the given gz_stream. Return a zlib error code.
+local uLong  getLong      OF((gz_stream *s));
- */
-local int destroy (s)
-    gz_stream *s;
-{
-    int err = Z_OK;
-
-    if (!s) return Z_STREAM_ERROR;
-
-    TRYFREE(s->inbuf);
-    TRYFREE(s->outbuf);
-    TRYFREE(s->path);
-    TRYFREE(s->msg);
-
-    if (s->stream.state != NULL) {
-       if (s->mode == 'w') {
-           err = deflateEnd(&(s->stream));
-       } else if (s->mode == 'r') {
-           err = inflateEnd(&(s->stream));
-       }
-    }
-    if (s->file != NULL && fclose(s->file)) {
-        err = Z_ERRNO;
-    }
-    if (s->z_err < 0) err = s->z_err;
-    TRYFREE(s);
-    return err;
-}
 
 /* ===========================================================================
      Opens a gzip (.gz) file for reading or writing. The mode parameter
@@ -91,15 +71,21 @@ local int destroy (s)
    zlib error is Z_MEM_ERROR).
 */
 local gzFile gz_open (path, mode, fd)
-    char *path;
+    const char *path;
-    char *mode;
+    const char *mode;
     int  fd;
 {
     int err;
     int level = Z_DEFAULT_COMPRESSION; /* compression level */
-    char *p = mode;
+    int strategy = Z_DEFAULT_STRATEGY; /* compression strategy */
-    gz_stream *s = (gz_stream *)ALLOC(sizeof(gz_stream));
+    char *p = (char*)mode;
+    gz_stream *s;
+    char fmode[80]; /* copy of mode, without the compression level */
+    char *m = fmode;
 
+    if (!path || !mode) return Z_NULL;
+
+    s = (gz_stream *)ALLOC(sizeof(gz_stream));
     if (!s) return Z_NULL;
 
     s->stream.zalloc = (alloc_func)0;
@@ -124,25 +110,42 @@ local gzFile gz_open (path, mode, fd)
     s->mode = '\0';
     do {
         if (*p == 'r') s->mode = 'r';
-        if (*p == 'w') s->mode = 'w';
+        if (*p == 'w' || *p == 'a') s->mode = 'w';
-        if (*p >= '1' && *p <= '9') level = *p - '0';
+        if (*p >= '0' && *p <= '9') {
-    } while (*p++);
+	    level = *p - '0';
+	} else if (*p == 'f') {
+	  strategy = Z_FILTERED;
+	} else if (*p == 'h') {
+	  strategy = Z_HUFFMAN_ONLY;
+	} else {
+	    *m++ = *p; /* copy the mode */
+	}
+    } while (*p++ && m != fmode + sizeof(fmode));
     if (s->mode == '\0') return destroy(s), (gzFile)Z_NULL;
     
     if (s->mode == 'w') {
+#ifdef NO_DEFLATE
+        err = Z_STREAM_ERROR;
+#else
         err = deflateInit2(&(s->stream), level,
-                           Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, 0);
+                           Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, strategy);
         /* windowBits is passed < 0 to suppress zlib header */
 
         s->stream.next_out = s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
-
+#endif
         if (err != Z_OK || s->outbuf == Z_NULL) {
             return destroy(s), (gzFile)Z_NULL;
         }
     } else {
-        err = inflateInit2(&(s->stream), -MAX_WBITS);
         s->stream.next_in  = s->inbuf = (Byte*)ALLOC(Z_BUFSIZE);
 
+        err = inflateInit2(&(s->stream), -MAX_WBITS);
+        /* windowBits is passed < 0 to tell that there is no zlib header.
+         * Note that in this case inflate *requires* an extra "dummy" byte
+         * after the compressed stream in order to complete decompression and
+         * return Z_STREAM_END. Here the gzip CRC32 ensures that 4 bytes are
+         * present after the compressed stream.
+         */
         if (err != Z_OK || s->inbuf == Z_NULL) {
             return destroy(s), (gzFile)Z_NULL;
         }
@@ -150,7 +153,7 @@ local gzFile gz_open (path, mode, fd)
     s->stream.avail_out = Z_BUFSIZE;
 
     errno = 0;
-    s->file = fd < 0 ? FOPEN(path, mode) : (FILE*)fdopen(fd, mode);
+    s->file = fd < 0 ? F_OPEN(path, fmode) : (FILE*)fdopen(fd, fmode);
 
     if (s->file == NULL) {
         return destroy(s), (gzFile)Z_NULL;
@@ -158,149 +161,338 @@ local gzFile gz_open (path, mode, fd)
     if (s->mode == 'w') {
         /* Write a very simple .gz header:
          */
-        fprintf(s->file, "%c%c%c%c%c%c%c%c%c%c", GZ_MAGIC_1, GZ_MAGIC_2,
+        fprintf(s->file, "%c%c%c%c%c%c%c%c%c%c", gz_magic[0], gz_magic[1],
              Z_DEFLATED, 0 /*flags*/, 0,0,0,0 /*time*/, 0 /*xflags*/, OS_CODE);
-    } else {
+	s->startpos = 10L;
-        /* Check and skip the header:
+	/* We use 10L instead of ftell(s->file) to because ftell causes an
+         * fflush on some systems. This version of the library doesn't use
+         * startpos anyway in write mode, so this initialization is not
+         * necessary.
          */
-        Byte c1 = 0, c2 = 0;
+    } else {
-        Byte method = 0;
+	check_header(s); /* skip the .gz header */
-        Byte flags = 0;
+	s->startpos = (ftell(s->file) - s->stream.avail_in);
-        Byte xflags = 0;
-        Byte time[4];
-        Byte osCode;
-        int c;
-
-        s->stream.avail_in = fread(s->inbuf, 1, 2, s->file);
-        if (s->stream.avail_in != 2 || s->inbuf[0] != GZ_MAGIC_1
-            || s->inbuf[1] != GZ_MAGIC_2) {
-            s->transparent = 1;
-            return (gzFile)s;
-        }
-        s->stream.avail_in = 0;
-        fscanf(s->file,"%c%c%4c%c%c", &method, &flags, time, &xflags, &osCode);
-
-        if (method != Z_DEFLATED || feof(s->file) || (flags & RESERVED) != 0) {
-            s->z_err = Z_DATA_ERROR;
-            return (gzFile)s;
-        }
-        if ((flags & EXTRA_FIELD) != 0) { /* skip the extra field */
-            long len;
-            fscanf(s->file, "%c%c", &c1, &c2);
-            len = c1 + ((long)c2<<8);
-            fseek(s->file, len, SEEK_CUR);
-        }
-        if ((flags & ORIG_NAME) != 0) { /* skip the original file name */
-            while ((c = getc(s->file)) != 0 && c != EOF) ;
-        }
-        if ((flags & COMMENT) != 0) {   /* skip the .gz file comment */
-            while ((c = getc(s->file)) != 0 && c != EOF) ;
-        }
-        if ((flags & HEAD_CRC) != 0) {  /* skip the header crc */
-            fscanf(s->file, "%c%c", &c1, &c2);
-        }
-        if (feof(s->file)) {
-            s->z_err = Z_DATA_ERROR;
-        }
     }
+    
     return (gzFile)s;
 }
 
 /* ===========================================================================
      Opens a gzip (.gz) file for reading or writing.
 */
-gzFile gzopen (path, mode)
+gzFile ZEXPORT gzopen (path, mode)
-    char *path;
+    const char *path;
-    char *mode;
+    const char *mode;
 {
     return gz_open (path, mode, -1);
 }
 
 /* ===========================================================================
-     Associate a gzFile with the file descriptor fd.
+     Associate a gzFile with the file descriptor fd. fd is not dup'ed here
+   to mimic the behavio(u)r of fdopen.
 */
-gzFile gzdopen (fd, mode)
+gzFile ZEXPORT gzdopen (fd, mode)
     int fd;
-    char *mode;
+    const char *mode;
 {
     char name[20];
+
+    if (fd < 0) return (gzFile)Z_NULL;
     sprintf(name, "<fd:%d>", fd); /* for debugging */
 
     return gz_open (name, mode, fd);
 }
 
+/* ===========================================================================
+ * Update the compression level and strategy
+ */
+int ZEXPORT gzsetparams (file, level, strategy)
+    gzFile file;
+    int level;
+    int strategy;
+{
+    gz_stream *s = (gz_stream*)file;
+
+    if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
+
+    /* Make room to allow flushing */
+    if (s->stream.avail_out == 0) {
+
+	s->stream.next_out = s->outbuf;
+	if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {
+	    s->z_err = Z_ERRNO;
+	}
+	s->stream.avail_out = Z_BUFSIZE;
+    }
+
+    return deflateParams (&(s->stream), level, strategy);
+}
+
+/* ===========================================================================
+     Read a byte from a gz_stream; update next_in and avail_in. Return EOF
+   for end of file.
+   IN assertion: the stream s has been sucessfully opened for reading.
+*/
+local int get_byte(s)
+    gz_stream *s;
+{
+    if (s->z_eof) return EOF;
+    if (s->stream.avail_in == 0) {
+	errno = 0;
+	s->stream.avail_in = fread(s->inbuf, 1, Z_BUFSIZE, s->file);
+	if (s->stream.avail_in == 0) {
+	    s->z_eof = 1;
+	    if (ferror(s->file)) s->z_err = Z_ERRNO;
+	    return EOF;
+	}
+	s->stream.next_in = s->inbuf;
+    }
+    s->stream.avail_in--;
+    return *(s->stream.next_in)++;
+}
+
+/* ===========================================================================
+      Check the gzip header of a gz_stream opened for reading. Set the stream
+    mode to transparent if the gzip magic header is not present; set s->err
+    to Z_DATA_ERROR if the magic header is present but the rest of the header
+    is incorrect.
+    IN assertion: the stream s has already been created sucessfully;
+       s->stream.avail_in is zero for the first time, but may be non-zero
+       for concatenated .gz files.
+*/
+local void check_header(s)
+    gz_stream *s;
+{
+    int method; /* method byte */
+    int flags;  /* flags byte */
+    uInt len;
+    int c;
+
+    /* Check the gzip magic header */
+    for (len = 0; len < 2; len++) {
+	c = get_byte(s);
+	if (c != gz_magic[len]) {
+	    if (len != 0) s->stream.avail_in++, s->stream.next_in--;
+	    if (c != EOF) {
+		s->stream.avail_in++, s->stream.next_in--;
+		s->transparent = 1;
+	    }
+	    s->z_err = s->stream.avail_in != 0 ? Z_OK : Z_STREAM_END;
+	    return;
+	}
+    }
+    method = get_byte(s);
+    flags = get_byte(s);
+    if (method != Z_DEFLATED || (flags & RESERVED) != 0) {
+	s->z_err = Z_DATA_ERROR;
+	return;
+    }
+
+    /* Discard time, xflags and OS code: */
+    for (len = 0; len < 6; len++) (void)get_byte(s);
+
+    if ((flags & EXTRA_FIELD) != 0) { /* skip the extra field */
+	len  =  (uInt)get_byte(s);
+	len += ((uInt)get_byte(s))<<8;
+	/* len is garbage if EOF but the loop below will quit anyway */
+	while (len-- != 0 && get_byte(s) != EOF) ;
+    }
+    if ((flags & ORIG_NAME) != 0) { /* skip the original file name */
+	while ((c = get_byte(s)) != 0 && c != EOF) ;
+    }
+    if ((flags & COMMENT) != 0) {   /* skip the .gz file comment */
+	while ((c = get_byte(s)) != 0 && c != EOF) ;
+    }
+    if ((flags & HEAD_CRC) != 0) {  /* skip the header crc */
+	for (len = 0; len < 2; len++) (void)get_byte(s);
+    }
+    s->z_err = s->z_eof ? Z_DATA_ERROR : Z_OK;
+}
+
+ /* ===========================================================================
+ * Cleanup then free the given gz_stream. Return a zlib error code.
+   Try freeing in the reverse order of allocations.
+ */
+local int destroy (s)
+    gz_stream *s;
+{
+    int err = Z_OK;
+
+    if (!s) return Z_STREAM_ERROR;
+
+    TRYFREE(s->msg);
+
+    if (s->stream.state != NULL) {
+	if (s->mode == 'w') {
+#ifdef NO_DEFLATE
+	    err = Z_STREAM_ERROR;
+#else
+	    err = deflateEnd(&(s->stream));
+#endif
+	} else if (s->mode == 'r') {
+	    err = inflateEnd(&(s->stream));
+	}
+    }
+    if (s->file != NULL && fclose(s->file)) {
+#ifdef ESPIPE
+	if (errno != ESPIPE) /* fclose is broken for pipes in HP/UX */
+#endif
+	    err = Z_ERRNO;
+    }
+    if (s->z_err < 0) err = s->z_err;
+
+    TRYFREE(s->inbuf);
+    TRYFREE(s->outbuf);
+    TRYFREE(s->path);
+    TRYFREE(s);
+    return err;
+}
+
 /* ===========================================================================
      Reads the given number of uncompressed bytes from the compressed file.
    gzread returns the number of bytes actually read (0 for end of file).
 */
-int gzread (file, buf, len)
+int ZEXPORT gzread (file, buf, len)
     gzFile file;
     voidp buf;
     unsigned len;
 {
     gz_stream *s = (gz_stream*)file;
+    Bytef *start = (Bytef*)buf; /* starting point for crc computation */
+    Byte  *next_out; /* == stream.next_out but not forced far (for MSDOS) */
 
     if (s == NULL || s->mode != 'r') return Z_STREAM_ERROR;
 
-    if (s->transparent) {
+    if (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO) return -1;
-        int n = 0;
+    if (s->z_err == Z_STREAM_END) return 0;  /* EOF */
-        Byte *b = (Byte*)buf;
-        /* Copy the first two (non-magic) bytes if not done already */
-        while (s->stream.avail_in > 0 && len > 0) {
-            *b++ = *s->stream.next_in++;
-            s->stream.avail_in--;
-            len--; n++;
-        }
-        if (len == 0) return n;
-        return n + fread(b, 1, len, s->file);
-    }
-    if (s->z_err == Z_DATA_ERROR) return -1; /* bad .gz file */
-    if (s->z_err == Z_STREAM_END) return 0;  /* don't read crc as data */
 
-    s->stream.next_out = buf;
+    next_out = (Byte*)buf;
+    s->stream.next_out = (Bytef*)buf;
     s->stream.avail_out = len;
 
     while (s->stream.avail_out != 0) {
 
+	if (s->transparent) {
+	    /* Copy first the lookahead bytes: */
+	    uInt n = s->stream.avail_in;
+	    if (n > s->stream.avail_out) n = s->stream.avail_out;
+	    if (n > 0) {
+		zmemcpy(s->stream.next_out, s->stream.next_in, n);
+		next_out += n;
+		s->stream.next_out = next_out;
+		s->stream.next_in   += n;
+		s->stream.avail_out -= n;
+		s->stream.avail_in  -= n;
+	    }
+	    if (s->stream.avail_out > 0) {
+		s->stream.avail_out -= fread(next_out, 1, s->stream.avail_out,
+					     s->file);
+	    }
+	    len -= s->stream.avail_out;
+	    s->stream.total_in  += (uLong)len;
+	    s->stream.total_out += (uLong)len;
+            if (len == 0) s->z_eof = 1;
+	    return (int)len;
+	}
         if (s->stream.avail_in == 0 && !s->z_eof) {
 
             errno = 0;
-            s->stream.avail_in =
+            s->stream.avail_in = fread(s->inbuf, 1, Z_BUFSIZE, s->file);
-                fread(s->inbuf, 1, Z_BUFSIZE, s->file);
             if (s->stream.avail_in == 0) {
                 s->z_eof = 1;
-            } else if (s->stream.avail_in == (uInt)EOF) {
+		if (ferror(s->file)) {
-                s->stream.avail_in = 0;
+		    s->z_err = Z_ERRNO;
-                s->z_eof = 1;
+		    break;
-                s->z_err = Z_ERRNO;
+		}
-                break;
             }
             s->stream.next_in = s->inbuf;
         }
         s->z_err = inflate(&(s->stream), Z_NO_FLUSH);
 
-        if (s->z_err == Z_STREAM_END ||
+	if (s->z_err == Z_STREAM_END) {
-            s->z_err != Z_OK  || s->z_eof) break;
+	    /* Check CRC and original size */
+	    s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
+	    start = s->stream.next_out;
+
+	    if (getLong(s) != s->crc) {
+		s->z_err = Z_DATA_ERROR;
+	    } else {
+	        (void)getLong(s);
+                /* The uncompressed length returned by above getlong() may
+                 * be different from s->stream.total_out) in case of
+		 * concatenated .gz files. Check for such files:
+		 */
+		check_header(s);
+		if (s->z_err == Z_OK) {
+		    uLong total_in = s->stream.total_in;
+		    uLong total_out = s->stream.total_out;
+
+		    inflateReset(&(s->stream));
+		    s->stream.total_in = total_in;
+		    s->stream.total_out = total_out;
+		    s->crc = crc32(0L, Z_NULL, 0);
+		}
+	    }
+	}
+	if (s->z_err != Z_OK || s->z_eof) break;
     }
-    len -= s->stream.avail_out;
+    s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
-    s->crc = crc32(s->crc, buf, len);
+
-    return (int)len;
+    return (int)(len - s->stream.avail_out);
 }
 
+
+/* ===========================================================================
+      Reads one byte from the compressed file. gzgetc returns this byte
+   or -1 in case of end of file or error.
+*/
+int ZEXPORT gzgetc(file)
+    gzFile file;
+{
+    unsigned char c;
+
+    return gzread(file, &c, 1) == 1 ? c : -1;
+}
+
+
+/* ===========================================================================
+      Reads bytes from the compressed file until len-1 characters are
+   read, or a newline character is read and transferred to buf, or an
+   end-of-file condition is encountered.  The string is then terminated
+   with a null character.
+      gzgets returns buf, or Z_NULL in case of error.
+
+      The current implementation is not optimized at all.
+*/
+char * ZEXPORT gzgets(file, buf, len)
+    gzFile file;
+    char *buf;
+    int len;
+{
+    char *b = buf;
+    if (buf == Z_NULL || len <= 0) return Z_NULL;
+
+    while (--len > 0 && gzread(file, buf, 1) == 1 && *buf++ != '\n') ;
+    *buf = '\0';
+    return b == buf && len > 0 ? Z_NULL : b;
+}
+
+
+#ifndef NO_DEFLATE
 /* ===========================================================================
      Writes the given number of uncompressed bytes into the compressed file.
    gzwrite returns the number of bytes actually written (0 in case of error).
 */
-int gzwrite (file, buf, len)
+int ZEXPORT gzwrite (file, buf, len)
     gzFile file;
-    voidp buf;
+    const voidp buf;
     unsigned len;
 {
     gz_stream *s = (gz_stream*)file;
 
     if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
 
-    s->stream.next_in = buf;
+    s->stream.next_in = (Bytef*)buf;
     s->stream.avail_in = len;
 
     while (s->stream.avail_in != 0) {
@@ -317,18 +509,95 @@ int gzwrite (file, buf, len)
         s->z_err = deflate(&(s->stream), Z_NO_FLUSH);
         if (s->z_err != Z_OK) break;
     }
-    s->crc = crc32(s->crc, buf, len);
+    s->crc = crc32(s->crc, (const Bytef *)buf, len);
 
     return (int)(len - s->stream.avail_in);
 }
 
+/* ===========================================================================
+     Converts, formats, and writes the args to the compressed file under
+   control of the format string, as in fprintf. gzprintf returns the number of
+   uncompressed bytes actually written (0 in case of error).
+*/
+#ifdef STDC
+#include <stdarg.h>
+
+int ZEXPORTVA gzprintf (gzFile file, const char *format, /* args */ ...)
+{
+    char buf[Z_PRINTF_BUFSIZE];
+    va_list va;
+    int len;
+
+    va_start(va, format);
+#ifdef HAS_vsnprintf
+    (void)vsnprintf(buf, sizeof(buf), format, va);
+#else
+    (void)vsprintf(buf, format, va);
+#endif
+    va_end(va);
+    len = strlen(buf); /* some *sprintf don't return the nb of bytes written */
+    if (len <= 0) return 0;
+
+    return gzwrite(file, buf, (unsigned)len);
+}
+#else /* not ANSI C */
+
+int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
+	               a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
+    gzFile file;
+    const char *format;
+    int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
+	a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
+{
+    char buf[Z_PRINTF_BUFSIZE];
+    int len;
+
+#ifdef HAS_snprintf
+    snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8,
+	     a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+#else
+    sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8,
+	    a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+#endif
+    len = strlen(buf); /* old sprintf doesn't return the nb of bytes written */
+    if (len <= 0) return 0;
+
+    return gzwrite(file, buf, len);
+}
+#endif
+
+/* ===========================================================================
+      Writes c, converted to an unsigned char, into the compressed file.
+   gzputc returns the value that was written, or -1 in case of error.
+*/
+int ZEXPORT gzputc(file, c)
+    gzFile file;
+    int c;
+{
+    unsigned char cc = (unsigned char) c; /* required for big endian systems */
+
+    return gzwrite(file, &cc, 1) == 1 ? (int)cc : -1;
+}
+
+
+/* ===========================================================================
+      Writes the given null-terminated string to the compressed file, excluding
+   the terminating null character.
+      gzputs returns the number of characters written, or -1 in case of error.
+*/
+int ZEXPORT gzputs(file, s)
+    gzFile file;
+    const char *s;
+{
+    return gzwrite(file, (char*)s, (unsigned)strlen(s));
+}
+
+
 /* ===========================================================================
      Flushes all pending output into the compressed file. The parameter
    flush is as in the deflate() function.
-     gzflush should be called only when strictly necessary because it can
-   degrade compression.
 */
-int gzflush (file, flush)
+local int do_flush (file, flush)
     gzFile file;
     int flush;
 {
@@ -344,7 +613,7 @@ int gzflush (file, flush)
         len = Z_BUFSIZE - s->stream.avail_out;
 
         if (len != 0) {
-            if (fwrite(s->outbuf, 1, len, s->file) != len) {
+            if ((uInt)fwrite(s->outbuf, 1, len, s->file) != len) {
                 s->z_err = Z_ERRNO;
                 return Z_ERRNO;
             }
@@ -354,6 +623,9 @@ int gzflush (file, flush)
         if (done) break;
         s->z_err = deflate(&(s->stream), flush);
 
+	/* Ignore the second of two consecutive flushes: */
+	if (len == 0 && s->z_err == Z_BUF_ERROR) s->z_err = Z_OK;
+
         /* deflate has finished flushing only when it hasn't used up
          * all the available space in the output buffer: 
          */
@@ -361,9 +633,155 @@ int gzflush (file, flush)
  
         if (s->z_err != Z_OK && s->z_err != Z_STREAM_END) break;
     }
+    return  s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
+}
+
+int ZEXPORT gzflush (file, flush)
+     gzFile file;
+     int flush;
+{
+    gz_stream *s = (gz_stream*)file;
+    int err = do_flush (file, flush);
+
+    if (err) return err;
     fflush(s->file);
     return  s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
 }
+#endif /* NO_DEFLATE */
+
+/* ===========================================================================
+      Sets the starting position for the next gzread or gzwrite on the given
+   compressed file. The offset represents a number of bytes in the
+      gzseek returns the resulting offset location as measured in bytes from
+   the beginning of the uncompressed stream, or -1 in case of error.
+      SEEK_END is not implemented, returns error.
+      In this version of the library, gzseek can be extremely slow.
+*/
+z_off_t ZEXPORT gzseek (file, offset, whence)
+    gzFile file;
+    z_off_t offset;
+    int whence;
+{
+    gz_stream *s = (gz_stream*)file;
+
+    if (s == NULL || whence == SEEK_END ||
+	s->z_err == Z_ERRNO || s->z_err == Z_DATA_ERROR) {
+	return -1L;
+    }
+    
+    if (s->mode == 'w') {
+#ifdef NO_DEFLATE
+	return -1L;
+#else
+	if (whence == SEEK_SET) {
+	    offset -= s->stream.total_in;
+	}
+	if (offset < 0) return -1L;
+
+	/* At this point, offset is the number of zero bytes to write. */
+	if (s->inbuf == Z_NULL) {
+	    s->inbuf = (Byte*)ALLOC(Z_BUFSIZE); /* for seeking */
+	    zmemzero(s->inbuf, Z_BUFSIZE);
+	}
+	while (offset > 0)  {
+	    uInt size = Z_BUFSIZE;
+	    if (offset < Z_BUFSIZE) size = (uInt)offset;
+
+	    size = gzwrite(file, s->inbuf, size);
+	    if (size == 0) return -1L;
+
+	    offset -= size;
+	}
+	return (z_off_t)s->stream.total_in;
+#endif
+    }
+    /* Rest of function is for reading only */
+
+    /* compute absolute position */
+    if (whence == SEEK_CUR) {
+	offset += s->stream.total_out;
+    }
+    if (offset < 0) return -1L;
+
+    if (s->transparent) {
+	/* map to fseek */
+	s->stream.avail_in = 0;
+	s->stream.next_in = s->inbuf;
+        if (fseek(s->file, offset, SEEK_SET) < 0) return -1L;
+
+	s->stream.total_in = s->stream.total_out = (uLong)offset;
+	return offset;
+    }
+
+    /* For a negative seek, rewind and use positive seek */
+    if ((uLong)offset >= s->stream.total_out) {
+	offset -= s->stream.total_out;
+    } else if (gzrewind(file) < 0) {
+	return -1L;
+    }
+    /* offset is now the number of bytes to skip. */
+
+    if (offset != 0 && s->outbuf == Z_NULL) {
+	s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
+    }
+    while (offset > 0)  {
+	int size = Z_BUFSIZE;
+	if (offset < Z_BUFSIZE) size = (int)offset;
+
+	size = gzread(file, s->outbuf, (uInt)size);
+	if (size <= 0) return -1L;
+	offset -= size;
+    }
+    return (z_off_t)s->stream.total_out;
+}
+
+/* ===========================================================================
+     Rewinds input file. 
+*/
+int ZEXPORT gzrewind (file)
+    gzFile file;
+{
+    gz_stream *s = (gz_stream*)file;
+    
+    if (s == NULL || s->mode != 'r') return -1;
+
+    s->z_err = Z_OK;
+    s->z_eof = 0;
+    s->stream.avail_in = 0;
+    s->stream.next_in = s->inbuf;
+    s->crc = crc32(0L, Z_NULL, 0);
+	
+    if (s->startpos == 0) { /* not a compressed file */
+	rewind(s->file);
+	return 0;
+    }
+
+    (void) inflateReset(&s->stream);
+    return fseek(s->file, s->startpos, SEEK_SET);
+}
+
+/* ===========================================================================
+     Returns the starting position for the next gzread or gzwrite on the
+   given compressed file. This position represents a number of bytes in the
+   uncompressed data stream.
+*/
+z_off_t ZEXPORT gztell (file)
+    gzFile file;
+{
+    return gzseek(file, 0L, SEEK_CUR);
+}
+
+/* ===========================================================================
+     Returns 1 when EOF has previously been detected reading the given
+   input stream, otherwise zero.
+*/
+int ZEXPORT gzeof (file)
+    gzFile file;
+{
+    gz_stream *s = (gz_stream*)file;
+    
+    return (s == NULL || s->mode != 'r') ? 0 : s->z_eof;
+}
 
 /* ===========================================================================
    Outputs a long in LSB order to the given file
@@ -380,18 +798,20 @@ local void putLong (file, x)
 }
 
 /* ===========================================================================
-   Reads a long in LSB order from the given buffer
+   Reads a long in LSB order from the given gz_stream. Sets z_err in case
+   of error.
 */
-local uLong getLong (buf)
+local uLong getLong (s)
-    Bytef *buf;
+    gz_stream *s;
 {
-    uLong x = 0;
+    uLong x = (uLong)get_byte(s);
-    Bytef *p = buf+4;
+    int c;
 
-    do {
+    x += ((uLong)get_byte(s))<<8;
-        x <<= 8;
+    x += ((uLong)get_byte(s))<<16;
-        x |= *--p; 
+    c = get_byte(s);
-    } while (p != buf);
+    if (c == EOF) s->z_err = Z_DATA_ERROR;
+    x += ((uLong)c)<<24;
     return x;
 }
 
@@ -399,43 +819,26 @@ local uLong getLong (buf)
      Flushes all pending output if necessary, closes the compressed file
    and deallocates all the (de)compression state.
 */
-int gzclose (file)
+int ZEXPORT gzclose (file)
     gzFile file;
 {
-    uInt n;
     int err;
     gz_stream *s = (gz_stream*)file;
 
     if (s == NULL) return Z_STREAM_ERROR;
 
     if (s->mode == 'w') {
-        err = gzflush (file, Z_FINISH);
+#ifdef NO_DEFLATE
-        if (err != Z_OK) return destroy(file);
+	return Z_STREAM_ERROR;
+#else
+        err = do_flush (file, Z_FINISH);
+        if (err != Z_OK) return destroy((gz_stream*)file);
 
         putLong (s->file, s->crc);
         putLong (s->file, s->stream.total_in);
-
+#endif
-    } else if (s->mode == 'r' && s->z_err == Z_STREAM_END) {
-
-        /* slide CRC and original size if they are at the end of inbuf */
-        if ((n = s->stream.avail_in) < 8  && !s->z_eof) {
-            Byte *p = s->inbuf;
-	    Bytef *q = s->stream.next_in;
-            while (n--) { *p++ = *q++; };
-
-            n = s->stream.avail_in;
-            n += fread(p, 1, 8, s->file);
-            s->stream.next_in = s->inbuf;
-        }
-        /* check CRC and original size */
-        if (n < 8 ||
-            getLong(s->stream.next_in) != s->crc ||
-            getLong(s->stream.next_in + 4) != s->stream.total_out) {
-
-            s->z_err = Z_DATA_ERROR;
-        }
     }
-    return destroy(file);
+    return destroy((gz_stream*)file);
 }
 
 /* ===========================================================================
@@ -445,7 +848,7 @@ int gzclose (file)
    errnum is set to Z_ERRNO and the application may consult errno
    to get the exact error code.
 */
-char*  gzerror (file, errnum)
+const char*  ZEXPORT gzerror (file, errnum)
     gzFile file;
     int *errnum;
 {
@@ -454,19 +857,19 @@ char*  gzerror (file, errnum)
 
     if (s == NULL) {
         *errnum = Z_STREAM_ERROR;
-        return z_errmsg[1-Z_STREAM_ERROR];
+        return (const char*)ERR_MSG(Z_STREAM_ERROR);
     }
     *errnum = s->z_err;
-    if (*errnum == Z_OK) return "";
+    if (*errnum == Z_OK) return (const char*)"";
 
-    m =  *errnum == Z_ERRNO ? zstrerror(errno) : s->stream.msg;
+    m =  (char*)(*errnum == Z_ERRNO ? zstrerror(errno) : s->stream.msg);
 
-    if (m == NULL || *m == '\0') m = z_errmsg[1-s->z_err];
+    if (m == NULL || *m == '\0') m = (char*)ERR_MSG(s->z_err);
 
     TRYFREE(s->msg);
     s->msg = (char*)ALLOC(strlen(s->path) + strlen(m) + 3);
     strcpy(s->msg, s->path);
     strcat(s->msg, ": ");
     strcat(s->msg, m);
-    return s->msg;
+    return (const char*)s->msg;
 }

infblock.c

@@ -1,5 +1,5 @@
 /* infblock.c -- interpret and process block types to last block
- * Copyright (C) 1995 Mark Adler
+ * Copyright (C) 1995-1998 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -11,8 +11,12 @@
 
 struct inflate_codes_state {int dummy;}; /* for buggy compilers */
 
+/* simplify the use of the inflate_huft type with some defines */
+#define exop word.what.Exop
+#define bits word.what.Bits
+
 /* Table for deflate from PKZIP's appnote.txt. */
-local uInt border[] = { /* Order of the bit length code lengths */
+local const uInt border[] = { /* Order of the bit length code lengths */
         16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
 
 /*
@@ -63,31 +67,27 @@ local uInt border[] = { /* Order of the bit length code lengths */
 
 void inflate_blocks_reset(s, z, c)
 inflate_blocks_statef *s;
-z_stream *z;
+z_streamp z;
 uLongf *c;
 {
-  if (s->checkfn != Z_NULL)
+  if (c != Z_NULL)
     *c = s->check;
   if (s->mode == BTREE || s->mode == DTREE)
     ZFREE(z, s->sub.trees.blens);
   if (s->mode == CODES)
-  {
     inflate_codes_free(s->sub.decode.codes, z);
-    inflate_trees_free(s->sub.decode.td, z);
-    inflate_trees_free(s->sub.decode.tl, z);
-  }
   s->mode = TYPE;
   s->bitk = 0;
   s->bitb = 0;
   s->read = s->write = s->window;
   if (s->checkfn != Z_NULL)
-    s->check = (*s->checkfn)(0L, Z_NULL, 0);
+    z->adler = s->check = (*s->checkfn)(0L, (const Bytef *)Z_NULL, 0);
-  Trace((stderr, "inflate:   blocks reset\n"));
+  Tracev((stderr, "inflate:   blocks reset\n"));
 }
 
 
 inflate_blocks_statef *inflate_blocks_new(z, c, w)
-z_stream *z;
+z_streamp z;
 check_func c;
 uInt w;
 {
@@ -96,23 +96,30 @@ uInt w;
   if ((s = (inflate_blocks_statef *)ZALLOC
        (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL)
     return s;
+  if ((s->hufts =
+       (inflate_huft *)ZALLOC(z, sizeof(inflate_huft), MANY)) == Z_NULL)
+  {
+    ZFREE(z, s);
+    return Z_NULL;
+  }
   if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL)
   {
+    ZFREE(z, s->hufts);
     ZFREE(z, s);
     return Z_NULL;
   }
   s->end = s->window + w;
   s->checkfn = c;
   s->mode = TYPE;
-  Trace((stderr, "inflate:   blocks allocated\n"));
+  Tracev((stderr, "inflate:   blocks allocated\n"));
-  inflate_blocks_reset(s, z, &s->check);
+  inflate_blocks_reset(s, z, Z_NULL);
   return s;
 }
 
 
 int inflate_blocks(s, z, r)
 inflate_blocks_statef *s;
-z_stream *z;
+z_streamp z;
 int r;
 {
   uInt t;               /* temporary storage */
@@ -136,7 +143,7 @@ int r;
       switch (t >> 1)
       {
         case 0:                         /* stored */
-          Trace((stderr, "inflate:     stored block%s\n",
+          Tracev((stderr, "inflate:     stored block%s\n",
                  s->last ? " (last)" : ""));
           DUMPBITS(3)
           t = k & 7;                    /* go to byte boundary */
@@ -144,27 +151,25 @@ int r;
           s->mode = LENS;               /* get length of stored block */
           break;
         case 1:                         /* fixed */
-          Trace((stderr, "inflate:     fixed codes block%s\n",
+          Tracev((stderr, "inflate:     fixed codes block%s\n",
                  s->last ? " (last)" : ""));
           {
             uInt bl, bd;
             inflate_huft *tl, *td;
 
-            inflate_trees_fixed(&bl, &bd, &tl, &td);
+            inflate_trees_fixed(&bl, &bd, &tl, &td, z);
             s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z);
             if (s->sub.decode.codes == Z_NULL)
             {
               r = Z_MEM_ERROR;
               LEAVE
             }
-            s->sub.decode.tl = Z_NULL;  /* don't try to free these */
-            s->sub.decode.td = Z_NULL;
           }
           DUMPBITS(3)
           s->mode = CODES;
           break;
         case 2:                         /* dynamic */
-          Trace((stderr, "inflate:     dynamic codes block%s\n",
+          Tracev((stderr, "inflate:     dynamic codes block%s\n",
                  s->last ? " (last)" : ""));
           DUMPBITS(3)
           s->mode = TABLE;
@@ -172,7 +177,7 @@ int r;
         case 3:                         /* illegal */
           DUMPBITS(3)
           s->mode = BAD;
-          z->msg = "invalid block type";
+          z->msg = (char*)"invalid block type";
           r = Z_DATA_ERROR;
           LEAVE
       }
@@ -182,14 +187,14 @@ int r;
       if ((((~b) >> 16) & 0xffff) != (b & 0xffff))
       {
         s->mode = BAD;
-        z->msg = "invalid stored block lengths";
+        z->msg = (char*)"invalid stored block lengths";
         r = Z_DATA_ERROR;
         LEAVE
       }
       s->sub.left = (uInt)b & 0xffff;
       b = k = 0;                      /* dump bits */
       Tracev((stderr, "inflate:       stored length %u\n", s->sub.left));
-      s->mode = s->sub.left ? STORED : TYPE;
+      s->mode = s->sub.left ? STORED : (s->last ? DRY : TYPE);
       break;
     case STORED:
       if (n == 0)
@@ -215,14 +220,12 @@ int r;
       if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29)
       {
         s->mode = BAD;
-        z->msg = "too many length or distance symbols";
+        z->msg = (char*)"too many length or distance symbols";
         r = Z_DATA_ERROR;
         LEAVE
       }
 #endif
       t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f);
-      if (t < 19)
-        t = 19;
       if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL)
       {
         r = Z_MEM_ERROR;
@@ -243,9 +246,10 @@ int r;
         s->sub.trees.blens[border[s->sub.trees.index++]] = 0;
       s->sub.trees.bb = 7;
       t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb,
-                             &s->sub.trees.tb, z);
+                             &s->sub.trees.tb, s->hufts, z);
       if (t != Z_OK)
       {
+        ZFREE(z, s->sub.trees.blens);
         r = t;
         if (r == Z_DATA_ERROR)
           s->mode = BAD;
@@ -264,8 +268,8 @@ int r;
         t = s->sub.trees.bb;
         NEEDBITS(t)
         h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]);
-        t = h->word.what.Bits;
+        t = h->bits;
-        c = h->more.Base;
+        c = h->base;
         if (c < 16)
         {
           DUMPBITS(t)
@@ -284,8 +288,9 @@ int r;
           if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||
               (c == 16 && i < 1))
           {
+            ZFREE(z, s->sub.trees.blens);
             s->mode = BAD;
-            z->msg = "invalid bit length repeat";
+            z->msg = (char*)"invalid bit length repeat";
             r = Z_DATA_ERROR;
             LEAVE
           }
@@ -296,7 +301,6 @@ int r;
           s->sub.trees.index = i;
         }
       }
-      inflate_trees_free(s->sub.trees.tb, z);
       s->sub.trees.tb = Z_NULL;
       {
         uInt bl, bd;
@@ -307,7 +311,9 @@ int r;
         bd = 6;         /* must be <= 9 for lookahead assumptions */
         t = s->sub.trees.table;
         t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f),
-                                  s->sub.trees.blens, &bl, &bd, &tl, &td, z);
+                                  s->sub.trees.blens, &bl, &bd, &tl, &td,
+                                  s->hufts, z);
+        ZFREE(z, s->sub.trees.blens);
         if (t != Z_OK)
         {
           if (t == (uInt)Z_DATA_ERROR)
@@ -318,15 +324,10 @@ int r;
         Tracev((stderr, "inflate:       trees ok\n"));
         if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL)
         {
-          inflate_trees_free(td, z);
-          inflate_trees_free(tl, z);
           r = Z_MEM_ERROR;
           LEAVE
         }
-        ZFREE(z, s->sub.trees.blens);
         s->sub.decode.codes = c;
-        s->sub.decode.tl = tl;
-        s->sub.decode.td = td;
       }
       s->mode = CODES;
     case CODES:
@@ -335,8 +336,6 @@ int r;
         return inflate_flush(s, z, r);
       r = Z_OK;
       inflate_codes_free(s->sub.decode.codes, z);
-      inflate_trees_free(s->sub.decode.td, z);
-      inflate_trees_free(s->sub.decode.tl, z);
       LOAD
       Tracev((stderr, "inflate:       codes end, %lu total out\n",
               z->total_out + (q >= s->read ? q - s->read :
@@ -346,13 +345,6 @@ int r;
         s->mode = TYPE;
         break;
       }
-      if (k > 7)              /* return unused byte, if any */
-      {
-        Assert(k < 16, "inflate_codes grabbed too many bytes")
-        k -= 8;
-        n++;
-        p--;                    /* can always return one */
-      }
       s->mode = DRY;
     case DRY:
       FLUSH
@@ -372,14 +364,35 @@ int r;
 }
 
 
-int inflate_blocks_free(s, z, c)
+int inflate_blocks_free(s, z)
 inflate_blocks_statef *s;
-z_stream *z;
+z_streamp z;
-uLongf *c;
 {
-  inflate_blocks_reset(s, z, c);
+  inflate_blocks_reset(s, z, Z_NULL);
   ZFREE(z, s->window);
+  ZFREE(z, s->hufts);
   ZFREE(z, s);
-  Trace((stderr, "inflate:   blocks freed\n"));
+  Tracev((stderr, "inflate:   blocks freed\n"));
   return Z_OK;
 }
+
+
+void inflate_set_dictionary(s, d, n)
+inflate_blocks_statef *s;
+const Bytef *d;
+uInt  n;
+{
+  zmemcpy(s->window, d, n);
+  s->read = s->write = s->window + n;
+}
+
+
+/* Returns true if inflate is currently at the end of a block generated
+ * by Z_SYNC_FLUSH or Z_FULL_FLUSH. 
+ * IN assertion: s != Z_NULL
+ */
+int inflate_blocks_sync_point(s)
+inflate_blocks_statef *s;
+{
+  return s->mode == LENS;
+}

infblock.h

@@ -1,5 +1,5 @@
 /* infblock.h -- header to use infblock.c
- * Copyright (C) 1995 Mark Adler
+ * Copyright (C) 1995-1998 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -12,21 +12,28 @@ struct inflate_blocks_state;
 typedef struct inflate_blocks_state FAR inflate_blocks_statef;
 
 extern inflate_blocks_statef * inflate_blocks_new OF((
-    z_stream *z,
+    z_streamp z,
     check_func c,               /* check function */
     uInt w));                   /* window size */
 
 extern int inflate_blocks OF((
     inflate_blocks_statef *,
-    z_stream *,
+    z_streamp ,
     int));                      /* initial return code */
 
 extern void inflate_blocks_reset OF((
     inflate_blocks_statef *,
-    z_stream *,
+    z_streamp ,
     uLongf *));                  /* check value on output */
 
 extern int inflate_blocks_free OF((
     inflate_blocks_statef *,
-    z_stream *,
+    z_streamp));
-    uLongf *));                  /* check value on output */
+
+extern void inflate_set_dictionary OF((
+    inflate_blocks_statef *s,
+    const Bytef *d,  /* dictionary */
+    uInt  n));       /* dictionary length */
+
+extern int inflate_blocks_sync_point OF((
+    inflate_blocks_statef *s));

infcodes.c

@@ -1,5 +1,5 @@
 /* infcodes.c -- process literals and length/distance pairs
- * Copyright (C) 1995 Mark Adler
+ * Copyright (C) 1995-1998 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -11,16 +11,10 @@
 #include "inffast.h"
 
 /* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
 #define exop word.what.Exop
 #define bits word.what.Bits
 
-/* inflate codes private state */
+typedef enum {        /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
-struct inflate_codes_state {
-
-  /* mode */
-  enum {        /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
       START,    /* x: set up for LEN */
       LEN,      /* i: get length/literal/eob next */
       LENEXT,   /* i: getting length extra (have base) */
@@ -31,7 +25,13 @@ struct inflate_codes_state {
       WASH,     /* o: got eob, possibly still output waiting */
       END,      /* x: got eob and all data flushed */
       BADCODE}  /* x: got error */
-    mode;               /* current inflate_codes mode */
+inflate_codes_mode;
+
+/* inflate codes private state */
+struct inflate_codes_state {
+
+  /* mode */
+  inflate_codes_mode mode;      /* current inflate_codes mode */
 
   /* mode dependent information */
   uInt len;
@@ -58,8 +58,9 @@ struct inflate_codes_state {
 
 inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z)
 uInt bl, bd;
-inflate_huft *tl, *td;
+inflate_huft *tl;
-z_stream *z;
+inflate_huft *td; /* need separate declaration for Borland C++ */
+z_streamp z;
 {
   inflate_codes_statef *c;
 
@@ -79,7 +80,7 @@ z_stream *z;
 
 int inflate_codes(s, z, r)
 inflate_blocks_statef *s;
-z_stream *z;
+z_streamp z;
 int r;
 {
   uInt j;               /* temporary storage */
@@ -142,7 +143,7 @@ int r;
       if ((e & 64) == 0)        /* next table */
       {
         c->sub.code.need = e;
-        c->sub.code.tree = t->next;
+        c->sub.code.tree = t + t->base;
         break;
       }
       if (e & 32)               /* end of block */
@@ -152,7 +153,7 @@ int r;
         break;
       }
       c->mode = BADCODE;        /* invalid code */
-      z->msg = "invalid literal/length code";
+      z->msg = (char*)"invalid literal/length code";
       r = Z_DATA_ERROR;
       LEAVE
     case LENEXT:        /* i: getting length extra (have base) */
@@ -180,11 +181,11 @@ int r;
       if ((e & 64) == 0)        /* next table */
       {
         c->sub.code.need = e;
-        c->sub.code.tree = t->next;
+        c->sub.code.tree = t + t->base;
         break;
       }
       c->mode = BADCODE;        /* invalid code */
-      z->msg = "invalid distance code";
+      z->msg = (char*)"invalid distance code";
       r = Z_DATA_ERROR;
       LEAVE
     case DISTEXT:       /* i: getting distance extra */
@@ -220,6 +221,13 @@ int r;
       c->mode = START;
       break;
     case WASH:          /* o: got eob, possibly more output */
+      if (k > 7)        /* return unused byte, if any */
+      {
+        Assert(k < 16, "inflate_codes grabbed too many bytes")
+        k -= 8;
+        n++;
+        p--;            /* can always return one */
+      }
       FLUSH
       if (s->read != s->write)
         LEAVE
@@ -234,12 +242,15 @@ int r;
       r = Z_STREAM_ERROR;
       LEAVE
   }
+#ifdef NEED_DUMMY_RETURN
+  return Z_STREAM_ERROR;  /* Some dumb compilers complain without this */
+#endif
 }
 
 
 void inflate_codes_free(c, z)
 inflate_codes_statef *c;
-z_stream *z;
+z_streamp z;
 {
   ZFREE(z, c);
   Tracev((stderr, "inflate:       codes free\n"));

infcodes.h

@@ -1,5 +1,5 @@
 /* infcodes.h -- header to use infcodes.c
- * Copyright (C) 1995 Mark Adler
+ * Copyright (C) 1995-1998 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -14,14 +14,14 @@ typedef struct inflate_codes_state FAR inflate_codes_statef;
 extern inflate_codes_statef *inflate_codes_new OF((
     uInt, uInt,
     inflate_huft *, inflate_huft *,
-    z_stream *));
+    z_streamp ));
 
 extern int inflate_codes OF((
     inflate_blocks_statef *,
-    z_stream *,
+    z_streamp ,
     int));
 
 extern void inflate_codes_free OF((
     inflate_codes_statef *,
-    z_stream *));
+    z_streamp ));
 

inffast.c

@@ -1,5 +1,5 @@
 /* inffast.c -- process literals and length/distance pairs fast
- * Copyright (C) 1995 Mark Adler
+ * Copyright (C) 1995-1998 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -13,14 +13,12 @@
 struct inflate_codes_state {int dummy;}; /* for buggy compilers */
 
 /* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
 #define exop word.what.Exop
 #define bits word.what.Bits
 
 /* macros for bit input with no checking and for returning unused bytes */
 #define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define UNGRAB {n+=(c=k>>3);p-=c;k&=7;}
+#define UNGRAB {c=z->avail_in-n;c=(k>>3)<c?k>>3:c;n+=c;p-=c;k-=c<<3;}
 
 /* Called with number of bytes left to write in window at least 258
    (the maximum string length) and number of input bytes available
@@ -29,9 +27,10 @@ struct inflate_codes_state {int dummy;}; /* for buggy compilers */
 
 int inflate_fast(bl, bd, tl, td, s, z)
 uInt bl, bd;
-inflate_huft *tl, *td;
+inflate_huft *tl;
+inflate_huft *td; /* need separate declaration for Borland C++ */
 inflate_blocks_statef *s;
-z_stream *z;
+z_streamp z;
 {
   inflate_huft *t;      /* temporary pointer */
   uInt e;               /* extra bits or operation */
@@ -119,10 +118,13 @@ z_stream *z;
             break;
           }
           else if ((e & 64) == 0)
-            e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop;
+          {
+            t += t->base;
+            e = (t += ((uInt)b & inflate_mask[e]))->exop;
+          }
           else
           {
-            z->msg = "invalid distance code";
+            z->msg = (char*)"invalid distance code";
             UNGRAB
             UPDATE
             return Z_DATA_ERROR;
@@ -132,7 +134,8 @@ z_stream *z;
       }
       if ((e & 64) == 0)
       {
-        if ((e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop) == 0)
+        t += t->base;
+        if ((e = (t += ((uInt)b & inflate_mask[e]))->exop) == 0)
         {
           DUMPBITS(t->bits)
           Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
@@ -152,7 +155,7 @@ z_stream *z;
       }
       else
       {
-        z->msg = "invalid literal/length code";
+        z->msg = (char*)"invalid literal/length code";
         UNGRAB
         UPDATE
         return Z_DATA_ERROR;

inffast.h

@@ -1,5 +1,5 @@
 /* inffast.h -- header to use inffast.c
- * Copyright (C) 1995 Mark Adler
+ * Copyright (C) 1995-1998 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -14,4 +14,4 @@ extern int inflate_fast OF((
     inflate_huft *,
     inflate_huft *,
     inflate_blocks_statef *,
-    z_stream *));
+    z_streamp ));

inffixed.h

@@ -0,0 +1,151 @@
+/* inffixed.h -- table for decoding fixed codes
+ * Generated automatically by the maketree.c program
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+local uInt fixed_bl = 9;
+local uInt fixed_bd = 5;
+local inflate_huft fixed_tl[] = {
+    {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},
+    {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},192},
+    {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},160},
+    {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},224},
+    {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},144},
+    {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},208},
+    {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},176},
+    {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},240},
+    {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},
+    {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},200},
+    {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},168},
+    {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},232},
+    {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},152},
+    {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},216},
+    {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},184},
+    {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},248},
+    {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},
+    {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},196},
+    {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},164},
+    {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},228},
+    {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},148},
+    {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},212},
+    {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},180},
+    {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},244},
+    {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},
+    {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},204},
+    {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},172},
+    {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},236},
+    {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},156},
+    {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},220},
+    {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},188},
+    {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},252},
+    {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},
+    {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},194},
+    {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},162},
+    {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},226},
+    {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},146},
+    {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},210},
+    {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},178},
+    {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},242},
+    {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},
+    {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},202},
+    {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},170},
+    {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},234},
+    {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},154},
+    {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},218},
+    {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},186},
+    {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},250},
+    {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},
+    {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},198},
+    {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},166},
+    {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},230},
+    {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},150},
+    {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},214},
+    {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},182},
+    {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},246},
+    {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},
+    {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},206},
+    {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},174},
+    {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},238},
+    {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},158},
+    {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},222},
+    {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},190},
+    {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},254},
+    {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},
+    {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},193},
+    {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},161},
+    {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},225},
+    {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},145},
+    {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},209},
+    {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},177},
+    {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},241},
+    {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},
+    {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},201},
+    {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},169},
+    {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},233},
+    {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},153},
+    {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},217},
+    {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},185},
+    {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},249},
+    {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},
+    {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},197},
+    {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},165},
+    {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},229},
+    {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},149},
+    {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},213},
+    {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},181},
+    {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},245},
+    {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},
+    {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},205},
+    {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},173},
+    {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},237},
+    {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},157},
+    {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},221},
+    {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},189},
+    {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},253},
+    {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},
+    {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},195},
+    {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},163},
+    {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},227},
+    {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},147},
+    {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},211},
+    {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},179},
+    {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},243},
+    {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},
+    {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},203},
+    {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},171},
+    {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},235},
+    {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},155},
+    {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},219},
+    {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},187},
+    {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},251},
+    {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},
+    {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},199},
+    {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},167},
+    {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},231},
+    {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},151},
+    {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},215},
+    {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},183},
+    {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},247},
+    {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},
+    {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},207},
+    {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},175},
+    {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},239},
+    {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},159},
+    {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},223},
+    {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},191},
+    {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},255}
+  };
+local inflate_huft fixed_td[] = {
+    {{{80,5}},1}, {{{87,5}},257}, {{{83,5}},17}, {{{91,5}},4097},
+    {{{81,5}},5}, {{{89,5}},1025}, {{{85,5}},65}, {{{93,5}},16385},
+    {{{80,5}},3}, {{{88,5}},513}, {{{84,5}},33}, {{{92,5}},8193},
+    {{{82,5}},9}, {{{90,5}},2049}, {{{86,5}},129}, {{{192,5}},24577},
+    {{{80,5}},2}, {{{87,5}},385}, {{{83,5}},25}, {{{91,5}},6145},
+    {{{81,5}},7}, {{{89,5}},1537}, {{{85,5}},97}, {{{93,5}},24577},
+    {{{80,5}},4}, {{{88,5}},769}, {{{84,5}},49}, {{{92,5}},12289},
+    {{{82,5}},13}, {{{90,5}},3073}, {{{86,5}},193}, {{{192,5}},24577}
+  };

inflate.c

@@ -1,5 +1,5 @@
 /* inflate.c -- zlib interface to inflate modules
- * Copyright (C) 1995 Mark Adler
+ * Copyright (C) 1995-1998 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -8,13 +8,14 @@
 
 struct inflate_blocks_state {int dummy;}; /* for buggy compilers */
 
-/* inflate private state */
+typedef enum {
-struct internal_state {
-
-  /* mode */
-  enum {
       METHOD,   /* waiting for method byte */
       FLAG,     /* waiting for flag byte */
+      DICT4,    /* four dictionary check bytes to go */
+      DICT3,    /* three dictionary check bytes to go */
+      DICT2,    /* two dictionary check bytes to go */
+      DICT1,    /* one dictionary check byte to go */
+      DICT0,    /* waiting for inflateSetDictionary */
       BLOCKS,   /* decompressing blocks */
       CHECK4,   /* four check bytes to go */
       CHECK3,   /* three check bytes to go */
@@ -22,7 +23,13 @@ struct internal_state {
       CHECK1,   /* one check byte to go */
       DONE,     /* finished check, done */
       BAD}      /* got an error--stay here */
-    mode;               /* current inflate mode */
+inflate_mode;
+
+/* inflate private state */
+struct internal_state {
+
+  /* mode */
+  inflate_mode  mode;   /* current inflate mode */
 
   /* mode dependent information */
   union {
@@ -43,42 +50,44 @@ struct internal_state {
 };
 
 
-int inflateReset(z)
+int ZEXPORT inflateReset(z)
-z_stream *z;
+z_streamp z;
 {
-  uLong c;
-
   if (z == Z_NULL || z->state == Z_NULL)
     return Z_STREAM_ERROR;
   z->total_in = z->total_out = 0;
   z->msg = Z_NULL;
   z->state->mode = z->state->nowrap ? BLOCKS : METHOD;
-  inflate_blocks_reset(z->state->blocks, z, &c);
+  inflate_blocks_reset(z->state->blocks, z, Z_NULL);
-  Trace((stderr, "inflate: reset\n"));
+  Tracev((stderr, "inflate: reset\n"));
   return Z_OK;
 }
 
 
-int inflateEnd(z)
+int ZEXPORT inflateEnd(z)
-z_stream *z;
+z_streamp z;
 {
-  uLong c;
-
   if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)
     return Z_STREAM_ERROR;
   if (z->state->blocks != Z_NULL)
-    inflate_blocks_free(z->state->blocks, z, &c);
+    inflate_blocks_free(z->state->blocks, z);
   ZFREE(z, z->state);
   z->state = Z_NULL;
-  Trace((stderr, "inflate: end\n"));
+  Tracev((stderr, "inflate: end\n"));
   return Z_OK;
 }
 
 
-int inflateInit2(z, w)
+int ZEXPORT inflateInit2_(z, w, version, stream_size)
-z_stream *z;
+z_streamp z;
 int w;
+const char *version;
+int stream_size;
 {
+  if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+      stream_size != sizeof(z_stream))
+      return Z_VERSION_ERROR;
+
   /* initialize state */
   if (z == Z_NULL)
     return Z_STREAM_ERROR;
@@ -112,13 +121,13 @@ int w;
 
   /* create inflate_blocks state */
   if ((z->state->blocks =
-       inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, 1 << w))
+      inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, (uInt)1 << w))
       == Z_NULL)
   {
     inflateEnd(z);
     return Z_MEM_ERROR;
   }
-  Trace((stderr, "inflate: allocated\n"));
+  Tracev((stderr, "inflate: allocated\n"));
 
   /* reset state */
   inflateReset(z);
@@ -126,25 +135,28 @@ int w;
 }
 
 
-int inflateInit(z)
+int ZEXPORT inflateInit_(z, version, stream_size)
-z_stream *z;
+z_streamp z;
+const char *version;
+int stream_size;
 {
-  return inflateInit2(z, DEF_WBITS);
+  return inflateInit2_(z, DEF_WBITS, version, stream_size);
 }
 
 
-#define NEEDBYTE {if(z->avail_in==0)return r;r=Z_OK;}
+#define NEEDBYTE {if(z->avail_in==0)return r;r=f;}
 #define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)
 
-int inflate(z, f)
+int ZEXPORT inflate(z, f)
-z_stream *z;
+z_streamp z;
 int f;
 {
-  int r = f;    /* to avoid warning about unused f */
+  int r;
   uInt b;
 
-  if (z == Z_NULL || z->next_in == Z_NULL)
+  if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL)
     return Z_STREAM_ERROR;
+  f = f == Z_FINISH ? Z_BUF_ERROR : Z_OK;
   r = Z_BUF_ERROR;
   while (1) switch (z->state->mode)
   {
@@ -153,36 +165,58 @@ int f;
       if (((z->state->sub.method = NEXTBYTE) & 0xf) != Z_DEFLATED)
       {
         z->state->mode = BAD;
-        z->msg = "unknown compression method";
+        z->msg = (char*)"unknown compression method";
         z->state->sub.marker = 5;       /* can't try inflateSync */
         break;
       }
       if ((z->state->sub.method >> 4) + 8 > z->state->wbits)
       {
         z->state->mode = BAD;
-        z->msg = "invalid window size";
+        z->msg = (char*)"invalid window size";
         z->state->sub.marker = 5;       /* can't try inflateSync */
         break;
       }
       z->state->mode = FLAG;
     case FLAG:
       NEEDBYTE
-      if ((b = NEXTBYTE) & 0x20)
+      b = NEXTBYTE;
-      {
-        z->state->mode = BAD;
-        z->msg = "invalid reserved bit";
-        z->state->sub.marker = 5;       /* can't try inflateSync */
-        break;
-      }
       if (((z->state->sub.method << 8) + b) % 31)
       {
         z->state->mode = BAD;
-        z->msg = "incorrect header check";
+        z->msg = (char*)"incorrect header check";
         z->state->sub.marker = 5;       /* can't try inflateSync */
         break;
       }
-      Trace((stderr, "inflate: zlib header ok\n"));
+      Tracev((stderr, "inflate: zlib header ok\n"));
-      z->state->mode = BLOCKS;
+      if (!(b & PRESET_DICT))
+      {
+        z->state->mode = BLOCKS;
+        break;
+      }
+      z->state->mode = DICT4;
+    case DICT4:
+      NEEDBYTE
+      z->state->sub.check.need = (uLong)NEXTBYTE << 24;
+      z->state->mode = DICT3;
+    case DICT3:
+      NEEDBYTE
+      z->state->sub.check.need += (uLong)NEXTBYTE << 16;
+      z->state->mode = DICT2;
+    case DICT2:
+      NEEDBYTE
+      z->state->sub.check.need += (uLong)NEXTBYTE << 8;
+      z->state->mode = DICT1;
+    case DICT1:
+      NEEDBYTE
+      z->state->sub.check.need += (uLong)NEXTBYTE;
+      z->adler = z->state->sub.check.need;
+      z->state->mode = DICT0;
+      return Z_NEED_DICT;
+    case DICT0:
+      z->state->mode = BAD;
+      z->msg = (char*)"need dictionary";
+      z->state->sub.marker = 0;       /* can try inflateSync */
+      return Z_STREAM_ERROR;
     case BLOCKS:
       r = inflate_blocks(z->state->blocks, z, r);
       if (r == Z_DATA_ERROR)
@@ -191,9 +225,11 @@ int f;
         z->state->sub.marker = 0;       /* can try inflateSync */
         break;
       }
+      if (r == Z_OK)
+        r = f;
       if (r != Z_STREAM_END)
         return r;
-      r = Z_OK;
+      r = f;
       inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
       if (z->state->nowrap)
       {
@@ -220,11 +256,11 @@ int f;
       if (z->state->sub.check.was != z->state->sub.check.need)
       {
         z->state->mode = BAD;
-        z->msg = "incorrect data check";
+        z->msg = (char*)"incorrect data check";
         z->state->sub.marker = 5;       /* can't try inflateSync */
         break;
       }
-      Trace((stderr, "inflate: zlib check ok\n"));
+      Tracev((stderr, "inflate: zlib check ok\n"));
       z->state->mode = DONE;
     case DONE:
       return Z_STREAM_END;
@@ -233,11 +269,38 @@ int f;
     default:
       return Z_STREAM_ERROR;
   }
+#ifdef NEED_DUMMY_RETURN
+  return Z_STREAM_ERROR;  /* Some dumb compilers complain without this */
+#endif
 }
 
 
-int inflateSync(z)
+int ZEXPORT inflateSetDictionary(z, dictionary, dictLength)
-z_stream *z;
+z_streamp z;
+const Bytef *dictionary;
+uInt  dictLength;
+{
+  uInt length = dictLength;
+
+  if (z == Z_NULL || z->state == Z_NULL || z->state->mode != DICT0)
+    return Z_STREAM_ERROR;
+
+  if (adler32(1L, dictionary, dictLength) != z->adler) return Z_DATA_ERROR;
+  z->adler = 1L;
+
+  if (length >= ((uInt)1<<z->state->wbits))
+  {
+    length = (1<<z->state->wbits)-1;
+    dictionary += dictLength - length;
+  }
+  inflate_set_dictionary(z->state->blocks, dictionary, length);
+  z->state->mode = BLOCKS;
+  return Z_OK;
+}
+
+
+int ZEXPORT inflateSync(z)
+z_streamp z;
 {
   uInt n;       /* number of bytes to look at */
   Bytef *p;     /* pointer to bytes */
@@ -260,7 +323,8 @@ z_stream *z;
   /* search */
   while (n && m < 4)
   {
-    if (*p == (Byte)(m < 2 ? 0 : 0xff))
+    static const Byte mark[4] = {0, 0, 0xff, 0xff};
+    if (*p == mark[m])
       m++;
     else if (*p)
       m = 0;
@@ -284,3 +348,19 @@ z_stream *z;
   z->state->mode = BLOCKS;
   return Z_OK;
 }
+
+
+/* Returns true if inflate is currently at the end of a block generated
+ * by Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP
+ * implementation to provide an additional safety check. PPP uses Z_SYNC_FLUSH
+ * but removes the length bytes of the resulting empty stored block. When
+ * decompressing, PPP checks that at the end of input packet, inflate is
+ * waiting for these length bytes.
+ */
+int ZEXPORT inflateSyncPoint(z)
+z_streamp z;
+{
+  if (z == Z_NULL || z->state == Z_NULL || z->state->blocks == Z_NULL)
+    return Z_STREAM_ERROR;
+  return inflate_blocks_sync_point(z->state->blocks);
+}

inftrees.c

@@ -1,12 +1,17 @@
 /* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995 Mark Adler
+ * Copyright (C) 1995-1998 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
 #include "zutil.h"
 #include "inftrees.h"
 
-char inflate_copyright[] = " inflate 1.0 Copyright 1995 Mark Adler ";
+#if !defined(BUILDFIXED) && !defined(STDC)
+#  define BUILDFIXED   /* non ANSI compilers may not accept inffixed.h */
+#endif
+
+const char inflate_copyright[] =
+   " inflate 1.1.3 Copyright 1995-1998 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -16,8 +21,6 @@ char inflate_copyright[] = " inflate 1.0 Copyright 1995 Mark Adler ";
 struct internal_state  {int dummy;}; /* for buggy compilers */
 
 /* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
 #define exop word.what.Exop
 #define bits word.what.Bits
 
@@ -26,30 +29,27 @@ local int huft_build OF((
     uIntf *,            /* code lengths in bits */
     uInt,               /* number of codes */
     uInt,               /* number of "simple" codes */
-    uIntf *,            /* list of base values for non-simple codes */
+    const uIntf *,      /* list of base values for non-simple codes */
-    uIntf *,            /* list of extra bits for non-simple codes */
+    const uIntf *,      /* list of extra bits for non-simple codes */
     inflate_huft * FAR*,/* result: starting table */
     uIntf *,            /* maximum lookup bits (returns actual) */
-    z_stream *));       /* for zalloc function */
+    inflate_huft *,     /* space for trees */
-
+    uInt *,             /* hufts used in space */
-local voidpf falloc OF((
+    uIntf * ));         /* space for values */
-    voidpf,             /* opaque pointer (not used) */
-    uInt,               /* number of items */
-    uInt));             /* size of item */
 
 /* Tables for deflate from PKZIP's appnote.txt. */
-local uInt cplens[] = { /* Copy lengths for literal codes 257..285 */
+local const uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */
         3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
         35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
-        /* actually lengths - 2; also see note #13 above about 258 */
+        /* see note #13 above about 258 */
-local uInt cplext[] = { /* Extra bits for literal codes 257..285 */
+local const uInt cplext[31] = { /* Extra bits for literal codes 257..285 */
         0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
-        3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 192, 192}; /* 192==invalid */
+        3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 112, 112}; /* 112==invalid */
-local uInt cpdist[] = { /* Copy offsets for distance codes 0..29 */
+local const uInt cpdist[30] = { /* Copy offsets for distance codes 0..29 */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
         257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
         8193, 12289, 16385, 24577};
-local uInt cpdext[] = { /* Extra bits for distance codes */
+local const uInt cpdext[30] = { /* Extra bits for distance codes */
         0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
         7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
         12, 12, 13, 13};
@@ -89,26 +89,23 @@ local uInt cpdext[] = { /* Extra bits for distance codes */
 
 /* If BMAX needs to be larger than 16, then h and x[] should be uLong. */
 #define BMAX 15         /* maximum bit length of any code */
-#define N_MAX 288       /* maximum number of codes in any set */
 
-#ifdef DEBUG
+local int huft_build(b, n, s, d, e, t, m, hp, hn, v)
-  uInt inflate_hufts;
-#endif
-
-local int huft_build(b, n, s, d, e, t, m, zs)
 uIntf *b;               /* code lengths in bits (all assumed <= BMAX) */
-uInt n;                 /* number of codes (assumed <= N_MAX) */
+uInt n;                 /* number of codes (assumed <= 288) */
 uInt s;                 /* number of simple-valued codes (0..s-1) */
-uIntf *d;               /* list of base values for non-simple codes */
+const uIntf *d;         /* list of base values for non-simple codes */
-uIntf *e;               /* list of extra bits for non-simple codes */  
+const uIntf *e;         /* list of extra bits for non-simple codes */
 inflate_huft * FAR *t;  /* result: starting table */
 uIntf *m;               /* maximum lookup bits, returns actual */
-z_stream *zs;           /* for zalloc function */
+inflate_huft *hp;       /* space for trees */
+uInt *hn;               /* hufts used in space */
+uIntf *v;               /* working area: values in order of bit length */
 /* Given a list of code lengths and a maximum table size, make a set of
    tables to decode that set of codes.  Return Z_OK on success, Z_BUF_ERROR
    if the given code set is incomplete (the tables are still built in this
-   case), Z_DATA_ERROR if the input is invalid (all zero length codes or an
+   case), Z_DATA_ERROR if the input is invalid (an over-subscribed set of
-   over-subscribed set of lengths), or Z_MEM_ERROR if not enough memory. */
+   lengths), or Z_MEM_ERROR if not enough memory. */
 {
 
   uInt a;                       /* counter for codes of length k */
@@ -120,11 +117,11 @@ z_stream *zs;           /* for zalloc function */
   register uInt j;              /* counter */
   register int k;               /* number of bits in current code */
   int l;                        /* bits per table (returned in m) */
+  uInt mask;                    /* (1 << w) - 1, to avoid cc -O bug on HP */
   register uIntf *p;            /* pointer into c[], b[], or v[] */
   inflate_huft *q;              /* points to current table */
   struct inflate_huft_s r;      /* table entry for structure assignment */
   inflate_huft *u[BMAX];        /* table stack */
-  uInt v[N_MAX];                /* values in order of bit length */
   register int w;               /* bits before this table == (l * h) */
   uInt x[BMAX+1];               /* bit offsets, then code stack */
   uIntf *xp;                    /* pointer into x */
@@ -190,6 +187,7 @@ z_stream *zs;           /* for zalloc function */
     if ((j = *p++) != 0)
       v[x[j]++] = i;
   } while (++i < n);
+  n = x[g];                     /* set n to length of v */
 
 
   /* Generate the Huffman codes and for each, make the table entries */
@@ -215,7 +213,8 @@ z_stream *zs;           /* for zalloc function */
         w += l;                 /* previous table always l bits */
 
         /* compute minimum size table less than or equal to l bits */
-        z = (z = g - w) > (uInt)l ? l : z;      /* table size upper limit */
+        z = g - w;
+        z = z > (uInt)l ? l : z;        /* table size upper limit */
         if ((f = 1 << (j = k - w)) > a + 1)     /* try a k-w bit table */
         {                       /* too few codes for k-w bit table */
           f -= a + 1;           /* deduct codes from patterns left */
@@ -230,20 +229,11 @@ z_stream *zs;           /* for zalloc function */
         }
         z = 1 << j;             /* table entries for j-bit table */
 
-        /* allocate and link in new table */
+        /* allocate new table */
-        if ((q = (inflate_huft *)ZALLOC
+        if (*hn + z > MANY)     /* (note: doesn't matter for fixed) */
-             (zs,z + 1,sizeof(inflate_huft))) == Z_NULL)
-        {
-          if (h)
-            inflate_trees_free(u[0], zs);
           return Z_MEM_ERROR;   /* not enough memory */
-        }
+        u[h] = q = hp + *hn;
-#ifdef DEBUG
+        *hn += z;
-        inflate_hufts += z + 1;
-#endif
-        *t = q + 1;             /* link to list for huft_free() */
-        *(t = &(q->next)) = Z_NULL;
-        u[h] = ++q;             /* table starts after link */
 
         /* connect to last table, if there is one */
         if (h)
@@ -251,10 +241,12 @@ z_stream *zs;           /* for zalloc function */
           x[h] = i;             /* save pattern for backing up */
           r.bits = (Byte)l;     /* bits to dump before this table */
           r.exop = (Byte)j;     /* bits in this table */
-          r.next = q;           /* pointer to this table */
+          j = i >> (w - l);
-          j = i >> (w - l);     /* (get around Turbo C bug) */
+          r.base = (uInt)(q - u[h-1] - j);   /* offset to this table */
           u[h-1][j] = r;        /* connect to last table */
         }
+        else
+          *t = q;               /* first table is returned result */
       }
 
       /* set up table entry in r */
@@ -268,7 +260,7 @@ z_stream *zs;           /* for zalloc function */
       }
       else
       {
-        r.exop = (Byte)e[*p - s] + 16 + 64; /* non-simple--look up in lists */
+        r.exop = (Byte)(e[*p - s] + 16 + 64);/* non-simple--look up in lists */
         r.base = d[*p++ - s];
       }
 
@@ -283,10 +275,12 @@ z_stream *zs;           /* for zalloc function */
       i ^= j;
 
       /* backup over finished tables */
-      while ((i & ((1 << w) - 1)) != x[h])
+      mask = (1 << w) - 1;      /* needed on HP, cc -O bug */
+      while ((i & mask) != x[h])
       {
         h--;                    /* don't need to update q */
         w -= l;
+        mask = (1 << w) - 1;
       }
     }
   }
@@ -297,28 +291,34 @@ z_stream *zs;           /* for zalloc function */
 }
 
 
-int inflate_trees_bits(c, bb, tb, z)
+int inflate_trees_bits(c, bb, tb, hp, z)
 uIntf *c;               /* 19 code lengths */
 uIntf *bb;              /* bits tree desired/actual depth */
 inflate_huft * FAR *tb; /* bits tree result */
-z_stream *z;            /* for zfree function */
+inflate_huft *hp;       /* space for trees */
+z_streamp z;            /* for messages */
 {
   int r;
+  uInt hn = 0;          /* hufts used in space */
+  uIntf *v;             /* work area for huft_build */
 
-  r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, tb, bb, z);
+  if ((v = (uIntf*)ZALLOC(z, 19, sizeof(uInt))) == Z_NULL)
+    return Z_MEM_ERROR;
+  r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL,
+                 tb, bb, hp, &hn, v);
   if (r == Z_DATA_ERROR)
-    z->msg = "oversubscribed dynamic bit lengths tree";
+    z->msg = (char*)"oversubscribed dynamic bit lengths tree";
-  else if (r == Z_BUF_ERROR)
+  else if (r == Z_BUF_ERROR || *bb == 0)
   {
-    inflate_trees_free(*tb, z);
+    z->msg = (char*)"incomplete dynamic bit lengths tree";
-    z->msg = "incomplete dynamic bit lengths tree";
     r = Z_DATA_ERROR;
   }
+  ZFREE(z, v);
   return r;
 }
 
 
-int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, z)
+int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, hp, z)
 uInt nl;                /* number of literal/length codes */
 uInt nd;                /* number of distance codes */
 uIntf *c;               /* that many (total) code lengths */
@@ -326,88 +326,100 @@ uIntf *bl;              /* literal desired/actual bit depth */
 uIntf *bd;              /* distance desired/actual bit depth */
 inflate_huft * FAR *tl; /* literal/length tree result */
 inflate_huft * FAR *td; /* distance tree result */
-z_stream *z;            /* for zfree function */
+inflate_huft *hp;       /* space for trees */
+z_streamp z;            /* for messages */
 {
   int r;
+  uInt hn = 0;          /* hufts used in space */
+  uIntf *v;             /* work area for huft_build */
+
+  /* allocate work area */
+  if ((v = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
+    return Z_MEM_ERROR;
 
   /* build literal/length tree */
-  if ((r = huft_build(c, nl, 257, cplens, cplext, tl, bl, z)) != Z_OK)
+  r = huft_build(c, nl, 257, cplens, cplext, tl, bl, hp, &hn, v);
+  if (r != Z_OK || *bl == 0)
   {
     if (r == Z_DATA_ERROR)
-      z->msg = "oversubscribed literal/length tree";
+      z->msg = (char*)"oversubscribed literal/length tree";
-    else if (r == Z_BUF_ERROR)
+    else if (r != Z_MEM_ERROR)
     {
-      inflate_trees_free(*tl, z);
+      z->msg = (char*)"incomplete literal/length tree";
-      z->msg = "incomplete literal/length tree";
       r = Z_DATA_ERROR;
     }
+    ZFREE(z, v);
     return r;
   }
 
   /* build distance tree */
-  if ((r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, z)) != Z_OK)
+  r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, hp, &hn, v);
+  if (r != Z_OK || (*bd == 0 && nl > 257))
   {
     if (r == Z_DATA_ERROR)
-      z->msg = "oversubscribed literal/length tree";
+      z->msg = (char*)"oversubscribed distance tree";
     else if (r == Z_BUF_ERROR) {
 #ifdef PKZIP_BUG_WORKAROUND
       r = Z_OK;
     }
 #else
-      inflate_trees_free(*td, z);
+      z->msg = (char*)"incomplete distance tree";
-      z->msg = "incomplete literal/length tree";
       r = Z_DATA_ERROR;
     }
-    inflate_trees_free(*tl, z);
+    else if (r != Z_MEM_ERROR)
+    {
+      z->msg = (char*)"empty distance tree with lengths";
+      r = Z_DATA_ERROR;
+    }
+    ZFREE(z, v);
     return r;
 #endif
   }
 
   /* done */
+  ZFREE(z, v);
   return Z_OK;
 }
 
 
 /* build fixed tables only once--keep them here */
+#ifdef BUILDFIXED
 local int fixed_built = 0;
-#define FIXEDH 530      /* number of hufts used by fixed tables */
+#define FIXEDH 544      /* number of hufts used by fixed tables */
 local inflate_huft fixed_mem[FIXEDH];
 local uInt fixed_bl;
 local uInt fixed_bd;
 local inflate_huft *fixed_tl;
 local inflate_huft *fixed_td;
+#else
+#include "inffixed.h"
+#endif
 
 
-local voidpf falloc(q, n, s)
+int inflate_trees_fixed(bl, bd, tl, td, z)
-voidpf q;       /* opaque pointer */
-uInt n;         /* number of items */
-uInt s;         /* size of item */
-{
-  Assert(s == sizeof(inflate_huft) && n <= *(intf *)q,
-         "inflate_trees falloc overflow");
-  *(intf *)q -= n;
-  return (voidpf)(fixed_mem + *(intf *)q);
-}
-
-
-int inflate_trees_fixed(bl, bd, tl, td)
 uIntf *bl;               /* literal desired/actual bit depth */
 uIntf *bd;               /* distance desired/actual bit depth */
 inflate_huft * FAR *tl;  /* literal/length tree result */
 inflate_huft * FAR *td;  /* distance tree result */
+z_streamp z;             /* for memory allocation */
 {
-  /* build fixed tables if not already (multiple overlapped executions ok) */
+#ifdef BUILDFIXED
+  /* build fixed tables if not already */
   if (!fixed_built)
   {
     int k;              /* temporary variable */
-    unsigned c[288];    /* length list for huft_build */
+    uInt f = 0;         /* number of hufts used in fixed_mem */
-    z_stream z;         /* for falloc function */
+    uIntf *c;           /* length list for huft_build */
-    int f = FIXEDH;     /* number of hufts left in fixed_mem */
+    uIntf *v;           /* work area for huft_build */
 
-    /* set up fake z_stream for memory routines */
+    /* allocate memory */
-    z.zalloc = falloc;
+    if ((c = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
-    z.zfree = Z_NULL;
+      return Z_MEM_ERROR;
-    z.opaque = (voidpf)&f;
+    if ((v = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
+    {
+      ZFREE(z, c);
+      return Z_MEM_ERROR;
+    }
 
     /* literal table */
     for (k = 0; k < 144; k++)
@@ -418,52 +430,26 @@ inflate_huft * FAR *td;  /* distance tree result */
       c[k] = 7;
     for (; k < 288; k++)
       c[k] = 8;
-    fixed_bl = 7;
+    fixed_bl = 9;
-    huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, &z);
+    huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl,
+               fixed_mem, &f, v);
 
     /* distance table */
     for (k = 0; k < 30; k++)
       c[k] = 5;
     fixed_bd = 5;
-    huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, &z);
+    huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd,
+               fixed_mem, &f, v);
 
     /* done */
-    Assert(f == 0, "invalid build of fixed tables");
+    ZFREE(z, v);
+    ZFREE(z, c);
     fixed_built = 1;
   }
+#endif
   *bl = fixed_bl;
   *bd = fixed_bd;
   *tl = fixed_tl;
   *td = fixed_td;
   return Z_OK;
 }
-
-
-int inflate_trees_free(t, z)
-inflate_huft *t;        /* table to free */
-z_stream *z;            /* for zfree function */
-/* Free the malloc'ed tables built by huft_build(), which makes a linked
-   list of the tables it made, with the links in a dummy first entry of
-   each table. */
-{
-  register inflate_huft *p, *q, *r;
-
-  /* Reverse linked list */
-  p = Z_NULL;
-  q = t;
-  while (q != Z_NULL)
-  {
-    r = (q - 1)->next;
-    (q - 1)->next = p;
-    p = q;
-    q = r;
-  }
-  /* Go through linked list, freeing from the malloced (t[-1]) address. */
-  while (p != Z_NULL)
-  {
-    q = (--p)->next;
-    ZFREE(z,p);
-    p = q;
-  } 
-  return Z_OK;
-}

inftrees.h

@@ -1,5 +1,5 @@
 /* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995 Mark Adler
+ * Copyright (C) 1995-1998 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -19,23 +19,25 @@ struct inflate_huft_s {
       Byte Exop;        /* number of extra bits or operation */
       Byte Bits;        /* number of bits in this code or subcode */
     } what;
-    Bytef *pad;         /* pad structure to a power of 2 (4 bytes for */
+    uInt pad;           /* pad structure to a power of 2 (4 bytes for */
-  } word;               /*  16-bit, 8 bytes for 32-bit machines) */
+  } word;               /*  16-bit, 8 bytes for 32-bit int's) */
-  union {
+  uInt base;            /* literal, length base, distance base,
-    uInt Base;          /* literal, length base, or distance base */
+                           or table offset */
-    inflate_huft *Next; /* pointer to next level of table */
-  } more;
 };
 
-#ifdef DEBUG
+/* Maximum size of dynamic tree.  The maximum found in a long but non-
-  extern uInt inflate_hufts;
+   exhaustive search was 1004 huft structures (850 for length/literals
-#endif
+   and 154 for distances, the latter actually the result of an
+   exhaustive search).  The actual maximum is not known, but the
+   value below is more than safe. */
+#define MANY 1440
 
 extern int inflate_trees_bits OF((
     uIntf *,                    /* 19 code lengths */
     uIntf *,                    /* bits tree desired/actual depth */
     inflate_huft * FAR *,       /* bits tree result */
-    z_stream *));               /* for zalloc, zfree functions */
+    inflate_huft *,             /* space for trees */
+    z_streamp));                /* for messages */
 
 extern int inflate_trees_dynamic OF((
     uInt,                       /* number of literal/length codes */
@@ -45,15 +47,12 @@ extern int inflate_trees_dynamic OF((
     uIntf *,                    /* distance desired/actual bit depth */
     inflate_huft * FAR *,       /* literal/length tree result */
     inflate_huft * FAR *,       /* distance tree result */
-    z_stream *));               /* for zalloc, zfree functions */
+    inflate_huft *,             /* space for trees */
+    z_streamp));                /* for messages */
 
 extern int inflate_trees_fixed OF((
     uIntf *,                    /* literal desired/actual bit depth */
     uIntf *,                    /* distance desired/actual bit depth */
     inflate_huft * FAR *,       /* literal/length tree result */
-    inflate_huft * FAR *));     /* distance tree result */
+    inflate_huft * FAR *,       /* distance tree result */
-
+    z_streamp));                /* for memory allocation */
-extern int inflate_trees_free OF((
-    inflate_huft *,             /* tables to free */
-    z_stream *));               /* for zfree function */
-

infutil.c

@@ -1,5 +1,5 @@
 /* inflate_util.c -- data and routines common to blocks and codes
- * Copyright (C) 1995 Mark Adler
+ * Copyright (C) 1995-1998 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -12,7 +12,7 @@
 struct inflate_codes_state {int dummy;}; /* for buggy compilers */
 
 /* And'ing with mask[n] masks the lower n bits */
-uInt inflate_mask[] = {
+uInt inflate_mask[17] = {
     0x0000,
     0x0001, 0x0003, 0x0007, 0x000f, 0x001f, 0x003f, 0x007f, 0x00ff,
     0x01ff, 0x03ff, 0x07ff, 0x0fff, 0x1fff, 0x3fff, 0x7fff, 0xffff
@@ -22,11 +22,12 @@ uInt inflate_mask[] = {
 /* copy as much as possible from the sliding window to the output area */
 int inflate_flush(s, z, r)
 inflate_blocks_statef *s;
-z_stream *z;
+z_streamp z;
 int r;
 {
   uInt n;
-  Bytef *p, *q;
+  Bytef *p;
+  Bytef *q;
 
   /* local copies of source and destination pointers */
   p = z->next_out;
@@ -43,7 +44,7 @@ int r;
 
   /* update check information */
   if (s->checkfn != Z_NULL)
-    s->check = (*s->checkfn)(s->check, q, n);
+    z->adler = s->check = (*s->checkfn)(s->check, q, n);
 
   /* copy as far as end of window */
   zmemcpy(p, q, n);
@@ -69,7 +70,7 @@ int r;
 
     /* update check information */
     if (s->checkfn != Z_NULL)
-      s->check = (*s->checkfn)(s->check, q, n);
+      z->adler = s->check = (*s->checkfn)(s->check, q, n);
 
     /* copy */
     zmemcpy(p, q, n);

infutil.h

@@ -1,5 +1,5 @@
 /* infutil.h -- types and macros common to blocks and codes
- * Copyright (C) 1995 Mark Adler
+ * Copyright (C) 1995-1998 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -8,11 +8,10 @@
    subject to change. Applications should only use zlib.h.
  */
 
-/* inflate blocks semi-private state */
+#ifndef _INFUTIL_H
-struct inflate_blocks_state {
+#define _INFUTIL_H
 
-  /* mode */
+typedef enum {
-  enum {
       TYPE,     /* get type bits (3, including end bit) */
       LENS,     /* get lengths for stored */
       STORED,   /* processing stored block */
@@ -23,7 +22,13 @@ struct inflate_blocks_state {
       DRY,      /* output remaining window bytes */
       DONE,     /* finished last block, done */
       BAD}      /* got a data error--stuck here */
-    mode;               /* current inflate_block mode */
+inflate_block_mode;
+
+/* inflate blocks semi-private state */
+struct inflate_blocks_state {
+
+  /* mode */
+  inflate_block_mode  mode;     /* current inflate_block mode */
 
   /* mode dependent information */
   union {
@@ -36,7 +41,6 @@ struct inflate_blocks_state {
       inflate_huft *tb;         /* bit length decoding tree */
     } trees;            /* if DTREE, decoding info for trees */
     struct {
-      inflate_huft *tl, *td;    /* trees to free */
       inflate_codes_statef 
          *codes;
     } decode;           /* if CODES, current state */
@@ -46,6 +50,7 @@ struct inflate_blocks_state {
   /* mode independent information */
   uInt bitk;            /* bits in bit buffer */
   uLong bitb;           /* bit buffer */
+  inflate_huft *hufts;  /* single malloc for tree space */
   Bytef *window;        /* sliding window */
   Bytef *end;           /* one byte after sliding window */
   Bytef *read;          /* window read pointer */
@@ -71,21 +76,23 @@ struct inflate_blocks_state {
 #define DUMPBITS(j) {b>>=(j);k-=(j);}
 /*   output bytes */
 #define WAVAIL (uInt)(q<s->read?s->read-q-1:s->end-q)
-#define LOADOUT {q=s->write;m=WAVAIL;}
+#define LOADOUT {q=s->write;m=(uInt)WAVAIL;}
-#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=WAVAIL;}}
+#define WRAP {if(q==s->end&&s->read!=s->window){q=s->window;m=(uInt)WAVAIL;}}
 #define FLUSH {UPDOUT r=inflate_flush(s,z,r); LOADOUT}
 #define NEEDOUT {if(m==0){WRAP if(m==0){FLUSH WRAP if(m==0) LEAVE}}r=Z_OK;}
 #define OUTBYTE(a) {*q++=(Byte)(a);m--;}
 /*   load local pointers */
 #define LOAD {LOADIN LOADOUT}
 
-/* masks for lower bits */
+/* masks for lower bits (size given to avoid silly warnings with Visual C++) */
-extern uInt inflate_mask[];
+extern uInt inflate_mask[17];
 
 /* copy as much as possible from the sliding window to the output area */
 extern int inflate_flush OF((
     inflate_blocks_statef *,
-    z_stream *,
+    z_streamp ,
     int));
 
 struct internal_state      {int dummy;}; /* for buggy compilers */
+
+#endif

maketree.c

@@ -0,0 +1,85 @@
+/* maketree.c -- make inffixed.h table for decoding fixed codes
+ * Copyright (C) 1998 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* This program is included in the distribution for completeness.
+   You do not need to compile or run this program since inffixed.h
+   is already included in the distribution.  To use this program
+   you need to compile zlib with BUILDFIXED defined and then compile
+   and link this program with the zlib library.  Then the output of
+   this program can be piped to inffixed.h. */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include "zutil.h"
+#include "inftrees.h"
+
+/* simplify the use of the inflate_huft type with some defines */
+#define exop word.what.Exop
+#define bits word.what.Bits
+
+/* generate initialization table for an inflate_huft structure array */
+void maketree(uInt b, inflate_huft *t)
+{
+  int i, e;
+
+  i = 0;
+  while (1)
+  {
+    e = t[i].exop;
+    if (e && (e & (16+64)) == 0)        /* table pointer */
+    {
+      fprintf(stderr, "maketree: cannot initialize sub-tables!\n");
+      exit(1);
+    }
+    if (i % 4 == 0)
+      printf("\n   ");
+    printf(" {{{%u,%u}},%u}", t[i].exop, t[i].bits, t[i].base);
+    if (++i == (1<<b))
+      break;
+    putchar(',');
+  }
+  puts("");
+}
+
+/* create the fixed tables in C initialization syntax */
+void main(void)
+{
+  int r;
+  uInt bl, bd;
+  inflate_huft *tl, *td;
+  z_stream z;
+
+  z.zalloc = zcalloc;
+  z.opaque = (voidpf)0;
+  z.zfree = zcfree;
+  r = inflate_trees_fixed(&bl, &bd, &tl, &td, &z);
+  if (r)
+  {
+    fprintf(stderr, "inflate_trees_fixed error %d\n", r);
+    return;
+  }
+  puts("/* inffixed.h -- table for decoding fixed codes");
+  puts(" * Generated automatically by the maketree.c program");
+  puts(" */");
+  puts("");
+  puts("/* WARNING: this file should *not* be used by applications. It is");
+  puts("   part of the implementation of the compression library and is");
+  puts("   subject to change. Applications should only use zlib.h.");
+  puts(" */");
+  puts("");
+  printf("local uInt fixed_bl = %d;\n", bl);
+  printf("local uInt fixed_bd = %d;\n", bd);
+  printf("local inflate_huft fixed_tl[] = {");
+  maketree(bl, tl);
+  puts("  };");
+  printf("local inflate_huft fixed_td[] = {");
+  maketree(bd, td);
+  puts("  };");
+}

minigzip.c

@@ -1,5 +1,5 @@
 /* minigzip.c -- simulate gzip using the zlib compression library
- * Copyright (C) 1995 Jean-loup Gailly.
+ * Copyright (C) 1995-1998 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -13,7 +13,7 @@
  * or in pipe mode.
  */
 
-/* $Id: minigzip.c,v 1.5 1995/05/03 17:27:11 jloup Exp $ */
+/* @(#) $Id$ */
 
 #include <stdio.h>
 #include "zlib.h"
@@ -24,7 +24,12 @@
 #else
    extern void exit  OF((int));
 #endif
-extern int unlink OF((const char *));
+
+#ifdef USE_MMAP
+#  include <sys/types.h>
+#  include <sys/mman.h>
+#  include <sys/stat.h>
+#endif
 
 #if defined(MSDOS) || defined(OS2) || defined(WIN32)
 #  include <fcntl.h>
@@ -35,35 +40,54 @@ extern int unlink OF((const char *));
 #endif
 
 #ifdef VMS
+#  define unlink delete
 #  define GZ_SUFFIX "-gz"
-#else
+#endif
+#ifdef RISCOS
+#  define unlink remove
+#  define GZ_SUFFIX "-gz"
+#  define fileno(file) file->__file
+#endif
+#if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
+#  include <unix.h> /* for fileno */
+#endif
+
+#ifndef WIN32 /* unlink already in stdio.h for WIN32 */
+  extern int unlink OF((const char *));
+#endif
+
+#ifndef GZ_SUFFIX
 #  define GZ_SUFFIX ".gz"
 #endif
-#define SUFFIX_LEN sizeof(GZ_SUFFIX)
+#define SUFFIX_LEN (sizeof(GZ_SUFFIX)-1)
 
-#define BUFLEN 4096
+#define BUFLEN      16384
 #define MAX_NAME_LEN 1024
 
-#define local static
+#ifdef MAXSEG_64K
-/* For MSDOS and other systems with limitation on stack size. For Unix,
+#  define local static
-    #define local
+   /* Needed for systems with limitation on stack size. */
-   works also.
+#else
- */
+#  define local
+#endif
 
 char *prog;
 
-void error           OF((char *msg));
+void error            OF((const char *msg));
-void gz_compress     OF((FILE   *in, gzFile out));
+void gz_compress      OF((FILE   *in, gzFile out));
-void gz_uncompress   OF((gzFile in, FILE   *out));
+#ifdef USE_MMAP
-void file_compress   OF((char  *file));
+int  gz_compress_mmap OF((FILE   *in, gzFile out));
-void file_uncompress OF((char  *file));
+#endif
-int  main            OF((int argc, char *argv[]));
+void gz_uncompress    OF((gzFile in, FILE   *out));
+void file_compress    OF((char  *file, char *mode));
+void file_uncompress  OF((char  *file));
+int  main             OF((int argc, char *argv[]));
 
 /* ===========================================================================
  * Display error message and exit
  */
 void error(msg)
-    char *msg;
+    const char *msg;
 {
     fprintf(stderr, "%s: %s\n", prog, msg);
     exit(1);
@@ -72,6 +96,7 @@ void error(msg)
 /* ===========================================================================
  * Compress input to output then close both files.
  */
+
 void gz_compress(in, out)
     FILE   *in;
     gzFile out;
@@ -80,6 +105,12 @@ void gz_compress(in, out)
     int len;
     int err;
 
+#ifdef USE_MMAP
+    /* Try first compressing with mmap. If mmap fails (minigzip used in a
+     * pipe), use the normal fread loop.
+     */
+    if (gz_compress_mmap(in, out) == Z_OK) return;
+#endif
     for (;;) {
         len = fread(buf, 1, sizeof(buf), in);
         if (ferror(in)) {
@@ -88,12 +119,49 @@ void gz_compress(in, out)
         }
         if (len == 0) break;
 
-        if (gzwrite(out, buf, len) != len) error(gzerror(out, &err));
+        if (gzwrite(out, buf, (unsigned)len) != len) error(gzerror(out, &err));
     }
     fclose(in);
     if (gzclose(out) != Z_OK) error("failed gzclose");
 }
 
+#ifdef USE_MMAP /* MMAP version, Miguel Albrecht <malbrech@eso.org> */
+
+/* Try compressing the input file at once using mmap. Return Z_OK if
+ * if success, Z_ERRNO otherwise.
+ */
+int gz_compress_mmap(in, out)
+    FILE   *in;
+    gzFile out;
+{
+    int len;
+    int err;
+    int ifd = fileno(in);
+    caddr_t buf;    /* mmap'ed buffer for the entire input file */
+    off_t buf_len;  /* length of the input file */
+    struct stat sb;
+
+    /* Determine the size of the file, needed for mmap: */
+    if (fstat(ifd, &sb) < 0) return Z_ERRNO;
+    buf_len = sb.st_size;
+    if (buf_len <= 0) return Z_ERRNO;
+
+    /* Now do the actual mmap: */
+    buf = mmap((caddr_t) 0, buf_len, PROT_READ, MAP_SHARED, ifd, (off_t)0); 
+    if (buf == (caddr_t)(-1)) return Z_ERRNO;
+
+    /* Compress the whole file at once: */
+    len = gzwrite(out, (char *)buf, (unsigned)buf_len);
+
+    if (len != (int)buf_len) error(gzerror(out, &err));
+
+    munmap(buf, buf_len);
+    fclose(in);
+    if (gzclose(out) != Z_OK) error("failed gzclose");
+    return Z_OK;
+}
+#endif /* USE_MMAP */
+
 /* ===========================================================================
  * Uncompress input to output then close both files.
  */
@@ -110,7 +178,9 @@ void gz_uncompress(in, out)
         if (len < 0) error (gzerror(in, &err));
         if (len == 0) break;
 
-        if (fwrite(buf, 1, len, out) != (uInt)len) error("failed fwrite");
+        if ((int)fwrite(buf, 1, (unsigned)len, out) != len) {
+	    error("failed fwrite");
+	}
     }
     if (fclose(out)) error("failed fclose");
 
@@ -122,8 +192,9 @@ void gz_uncompress(in, out)
  * Compress the given file: create a corresponding .gz file and remove the
  * original.
  */
-void file_compress(file)
+void file_compress(file, mode)
     char  *file;
+    char  *mode;
 {
     local char outfile[MAX_NAME_LEN];
     FILE  *in;
@@ -137,7 +208,7 @@ void file_compress(file)
         perror(file);
         exit(1);
     }
-    out = gzopen(outfile, "wb"); /* use "wb9" for maximal compression */
+    out = gzopen(outfile, mode);
     if (out == NULL) {
         fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile);
         exit(1);
@@ -189,7 +260,11 @@ void file_uncompress(file)
 
 
 /* ===========================================================================
- * Usage:  minigzip [-d] [files...]
+ * Usage:  minigzip [-d] [-f] [-h] [-1 to -9] [files...]
+ *   -d : decompress
+ *   -f : compress with Z_FILTERED
+ *   -h : compress with Z_HUFFMAN_ONLY
+ *   -1 to -9 : compression level
  */
 
 int main(argc, argv)
@@ -198,15 +273,26 @@ int main(argc, argv)
 {
     int uncompr = 0;
     gzFile file;
+    char outmode[20];
+
+    strcpy(outmode, "wb6 ");
 
     prog = argv[0];
     argc--, argv++;
 
-    if (argc > 0) {
+    while (argc > 0) {
-        uncompr = (strcmp(*argv, "-d") == 0);
+      if (strcmp(*argv, "-d") == 0)
-        if (uncompr) {
+	uncompr = 1;
-            argc--, argv++;
+      else if (strcmp(*argv, "-f") == 0)
-        }
+	outmode[3] = 'f';
+      else if (strcmp(*argv, "-h") == 0)
+	outmode[3] = 'h';
+      else if ((*argv)[0] == '-' && (*argv)[1] >= '1' && (*argv)[1] <= '9' &&
+	       (*argv)[2] == 0)
+	outmode[2] = (*argv)[1];
+      else
+	break;
+      argc--, argv++;
     }
     if (argc == 0) {
         SET_BINARY_MODE(stdin);
@@ -216,7 +302,7 @@ int main(argc, argv)
             if (file == NULL) error("can't gzdopen stdin");
             gz_uncompress(file, stdout);
         } else {
-            file = gzdopen(fileno(stdout), "wb"); /* "wb9" for max compr. */
+            file = gzdopen(fileno(stdout), outmode);
             if (file == NULL) error("can't gzdopen stdout");
             gz_compress(stdin, file);
         }
@@ -225,7 +311,7 @@ int main(argc, argv)
             if (uncompr) {
                 file_uncompress(*argv);
             } else {
-                file_compress(*argv);
+                file_compress(*argv, outmode);
             }
         } while (argv++, --argc);
     }

msdos/Makefile.b32

@@ -1,25 +1,24 @@
 # Makefile for zlib
-# Borland C++   ************ UNTESTED ***********
+# Borland C++   
 
-# To use, do "make -fmakefile.bor"
+# This version of the zlib makefile was adapted by Chris Young for use
-# To compile in small model, set below: MODEL=-ms
+# with Borland C 4.5x with the Dos Power Pack for a 32-bit protected mode
+# flat memory model.  It was created for use with POV-Ray ray tracer and
+# you may choose to edit the CFLAGS to suit your needs but the
+# switches -WX and -DMSDOS are required.
+# -- Chris Young 76702.1655@compuserve.com
+
+# To use, do "make -fmakefile.b32"
 
-# WARNING: the small model is supported but only for small values of
-# MAX_WBITS and MAX_MEM_LEVEL. For example:
-#    -DMAX_WBITS=11 -DDEF_WBITS=11 -DMAX_MEM_LEVEL=3
-# If you wish to reduce the memory requirements (default 256K for big
-# objects plus a few K), you can add to CFLAGS below: 
-#   -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
 # See zconf.h for details about the memory requirements.
 
-# ------------- Turbo C++, Borland C++ -------------
+# ------------- Borland C++ -------------
-MODEL=-ml
+MODEL=-WX 
-CFLAGS=-O2 -Z $(MODEL)
+CFLAGS= $(MODEL) -P-C -K -N- -k- -d -3 -r- -v- -f -DMSDOS
-CC=bcc
+CC=bcc32
-LD=bcc
+LD=bcc32
 LIB=tlib
-#   replace bcc with tcc for Turbo C++ 1.0
+LDFLAGS= $(MODEL)
-LDFLAGS=$(MODEL)
 O=.obj
 
 # variables
@@ -34,13 +33,13 @@ OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
 
 all: test
 
-adler32.obj: adler32.c zutil.h zlib.h zconf.h
+adler32.obj: adler32.c zlib.h zconf.h
 	$(CC) -c $(CFLAGS) $*.c
 
 compress.obj: compress.c zlib.h zconf.h
 	$(CC) -c $(CFLAGS) $*.c
 
-crc32.obj: crc32.c zutil.h zlib.h zconf.h
+crc32.obj: crc32.c zlib.h zconf.h
 	$(CC) -c $(CFLAGS) $*.c
 
 deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h

msdos/Makefile.bor

@@ -0,0 +1,125 @@
+# Makefile for zlib
+# Borland C++   ************ UNTESTED ***********
+
+# To use, do "make -fmakefile.bor"
+# To compile in small model, set below: MODEL=s
+
+# WARNING: the small model is supported but only for small values of
+# MAX_WBITS and MAX_MEM_LEVEL. For example:
+#    -DMAX_WBITS=11 -DDEF_WBITS=11 -DMAX_MEM_LEVEL=3
+# If you wish to reduce the memory requirements (default 256K for big
+# objects plus a few K), you can add to the LOC macro below:
+#   -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
+# See zconf.h for details about the memory requirements.
+
+# ------------- Turbo C++, Borland C++ -------------
+
+#    Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7)
+#    should be added to the environment via "set LOCAL_ZLIB=-DFOO" or added
+#    to the declaration of LOC here:
+LOC = $(LOCAL_ZLIB)
+
+# Type for CPU required: 0: 8086, 1: 80186, 2: 80286, 3: 80386, etc.
+CPU_TYP = 0
+
+# Memory model: one of s, m, c, l (small, medium, compact, large)
+MODEL=l
+
+CC=bcc
+#   replace bcc with tcc for Turbo C++ 1.0, with bcc32 for the 32 bit version
+LD=$(CC)
+AR=tlib
+
+# compiler flags
+CFLAGS=-O2 -Z -m$(MODEL) $(LOC)
+#   replace "-O2" by "-O -G -a -d" for Turbo C++ 1.0
+
+LDFLAGS=-m$(MODEL)
+
+O=.obj
+
+# variables
+OBJ1 = adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) \
+  trees$(O)
+OBJP1 = adler32$(O)+compress$(O)+crc32$(O)+gzio$(O)+uncompr$(O)+deflate$(O)+\
+  trees$(O)
+OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
+  infutil$(O) inffast$(O)
+OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
+  infutil$(O)+inffast$(O)
+
+ZLIB_H = zlib.h zconf.h
+ZUTIL_H = zutil.h $(ZLIB_H)
+
+ZLIB_LIB = zlib_$(MODEL).lib
+
+all: test
+
+# individual dependencies and action rules:
+adler32.obj: adler32.c $(ZLIB_H)
+	$(CC) -c $(CFLAGS) $*.c
+
+compress.obj: compress.c $(ZLIB_H)
+	$(CC) -c $(CFLAGS) $*.c
+
+crc32.obj: crc32.c $(ZLIB_H)
+	$(CC) -c $(CFLAGS) $*.c
+
+deflate.obj: deflate.c deflate.h $(ZUTIL_H)
+	$(CC) -c $(CFLAGS) $*.c
+
+gzio.obj: gzio.c $(ZUTIL_H)
+	$(CC) -c $(CFLAGS) $*.c
+
+infblock.obj: infblock.c $(ZUTIL_H) infblock.h inftrees.h infcodes.h infutil.h
+	$(CC) -c $(CFLAGS) $*.c
+
+infcodes.obj: infcodes.c $(ZUTIL_H) inftrees.h infutil.h infcodes.h inffast.h
+	$(CC) -c $(CFLAGS) $*.c
+
+inflate.obj: inflate.c $(ZUTIL_H) infblock.h
+	$(CC) -c $(CFLAGS) $*.c
+
+inftrees.obj: inftrees.c $(ZUTIL_H) inftrees.h
+	$(CC) -c $(CFLAGS) $*.c
+
+infutil.obj: infutil.c $(ZUTIL_H) inftrees.h infutil.h
+	$(CC) -c $(CFLAGS) $*.c
+
+inffast.obj: inffast.c $(ZUTIL_H) inftrees.h infutil.h inffast.h
+	$(CC) -c $(CFLAGS) $*.c
+
+trees.obj: trees.c deflate.h $(ZUTIL_H)
+	$(CC) -c $(CFLAGS) $*.c
+
+uncompr.obj: uncompr.c $(ZLIB_H)
+	$(CC) -c $(CFLAGS) $*.c
+
+zutil.obj: zutil.c $(ZUTIL_H)
+	$(CC) -c $(CFLAGS) $*.c
+
+example.obj: example.c $(ZLIB_H)
+	$(CC) -c $(CFLAGS) $*.c
+
+minigzip.obj: minigzip.c $(ZLIB_H)
+	$(CC) -c $(CFLAGS) $*.c
+
+# we must cut the command line to fit in the MS/DOS 128 byte limit:
+$(ZLIB_LIB): $(OBJ1) $(OBJ2)
+	del $(ZLIB_LIB)
+	$(AR) $(ZLIB_LIB) +$(OBJP1)
+	$(AR) $(ZLIB_LIB) +$(OBJP2)
+
+example.exe: example.obj $(ZLIB_LIB)
+	$(LD) $(LDFLAGS) example.obj $(ZLIB_LIB)
+
+minigzip.exe: minigzip.obj $(ZLIB_LIB)
+	$(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB)
+
+test: example.exe minigzip.exe
+	example
+	echo hello world | minigzip | minigzip -d 
+
+#clean:
+#	del *.obj
+#	del *.exe

msdos/Makefile.dj2

@@ -0,0 +1,100 @@
+# Makefile for zlib.  Modified for djgpp v2.0 by F. J. Donahoe, 3/15/96.
+# Copyright (C) 1995-1998 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h 
+
+# To compile, or to compile and test, type:
+# 
+#   make -fmakefile.dj2;  make test -fmakefile.dj2
+# 
+# To install libz.a, zconf.h and zlib.h in the djgpp directories, type:
+# 
+#    make install -fmakefile.dj2
+# 
+# after first defining LIBRARY_PATH and INCLUDE_PATH in djgpp.env as
+# in the sample below if the pattern of the DJGPP distribution is to
+# be followed.  Remember that, while <sp>'es around <=> are ignored in
+# makefiles, they are *not* in batch files or in djgpp.env.
+# - - - - -
+# [make]
+# INCLUDE_PATH=%\>;INCLUDE_PATH%%\DJDIR%\include
+# LIBRARY_PATH=%\>;LIBRARY_PATH%%\DJDIR%\lib
+# BUTT=-m486
+# - - - - -
+# Alternately, these variables may be defined below, overriding the values
+# in djgpp.env, as
+# INCLUDE_PATH=c:\usr\include
+# LIBRARY_PATH=c:\usr\lib
+
+CC=gcc
+
+#CFLAGS=-MMD -O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-MMD -g -DDEBUG
+CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+             -Wstrict-prototypes -Wmissing-prototypes
+
+# If cp.exe is available, replace "copy /Y" with "cp -fp" .
+CP=copy /Y
+# If gnu install.exe is available, replace $(CP) with ginstall.
+INSTALL=$(CP)
+# The default value of RM is "rm -f."  If "rm.exe" is found, comment out:
+RM=del
+LDLIBS=-L. -lz
+LD=$(CC) -s -o
+LDSHARED=$(CC)
+
+INCL=zlib.h zconf.h
+LIBS=libz.a
+
+AR=ar rcs
+
+prefix=/usr/local
+exec_prefix = $(prefix)
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example.exe minigzip.exe
+
+test: all
+	./example
+	echo hello world | .\minigzip | .\minigzip -d 
+
+%.o : %.c
+	$(CC) $(CFLAGS) -c $< -o $@
+
+libz.a: $(OBJS)
+	$(AR) $@ $(OBJS)
+
+%.exe : %.o $(LIBS)
+	$(LD) $@ $< $(LDLIBS)
+
+# INCLUDE_PATH and LIBRARY_PATH were set for [make] in djgpp.env .
+
+.PHONY : uninstall clean
+
+install: $(INCL) $(LIBS)
+	-@if not exist $(INCLUDE_PATH)\nul mkdir $(INCLUDE_PATH)
+	-@if not exist $(LIBRARY_PATH)\nul mkdir $(LIBRARY_PATH)
+	$(INSTALL) zlib.h $(INCLUDE_PATH)
+	$(INSTALL) zconf.h $(INCLUDE_PATH)
+	$(INSTALL) libz.a $(LIBRARY_PATH)
+
+uninstall:
+	$(RM) $(INCLUDE_PATH)\zlib.h
+	$(RM) $(INCLUDE_PATH)\zconf.h
+	$(RM) $(LIBRARY_PATH)\libz.a
+
+clean:
+	$(RM) *.d
+	$(RM) *.o
+	$(RM) *.exe
+	$(RM) libz.a
+	$(RM) foo.gz
+
+DEPS := $(wildcard *.d)
+ifneq ($(DEPS),)
+include $(DEPS)
+endif

msdos/Makefile.emx

@@ -0,0 +1,69 @@
+# Makefile for zlib.  Modified for emx 0.9c by Chr. Spieler, 6/17/98.
+# Copyright (C) 1995-1998 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h 
+
+# To compile, or to compile and test, type:
+# 
+#   make -fmakefile.emx;  make test -fmakefile.emx
+# 
+
+CC=gcc
+
+#CFLAGS=-MMD -O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-MMD -g -DDEBUG
+CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+             -Wstrict-prototypes -Wmissing-prototypes
+
+# If cp.exe is available, replace "copy /Y" with "cp -fp" .
+CP=copy /Y
+# If gnu install.exe is available, replace $(CP) with ginstall.
+INSTALL=$(CP)
+# The default value of RM is "rm -f."  If "rm.exe" is found, comment out:
+RM=del
+LDLIBS=-L. -lzlib
+LD=$(CC) -s -o
+LDSHARED=$(CC)
+
+INCL=zlib.h zconf.h
+LIBS=zlib.a
+
+AR=ar rcs
+
+prefix=/usr/local
+exec_prefix = $(prefix)
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example.exe minigzip.exe
+
+test: all
+	./example
+	echo hello world | .\minigzip | .\minigzip -d 
+
+%.o : %.c
+	$(CC) $(CFLAGS) -c $< -o $@
+
+zlib.a: $(OBJS)
+	$(AR) $@ $(OBJS)
+
+%.exe : %.o $(LIBS)
+	$(LD) $@ $< $(LDLIBS)
+
+
+.PHONY : clean
+
+clean:
+	$(RM) *.d
+	$(RM) *.o
+	$(RM) *.exe
+	$(RM) zlib.a
+	$(RM) foo.gz
+
+DEPS := $(wildcard *.d)
+ifneq ($(DEPS),)
+include $(DEPS)
+endif

msdos/Makefile.msc

@@ -0,0 +1,121 @@
+# Makefile for zlib
+# Microsoft C 5.1 or later
+
+# To use, do "make makefile.msc"
+# To compile in small model, set below: MODEL=S
+
+# If you wish to reduce the memory requirements (default 256K for big
+# objects plus a few K), you can add to the LOC macro below:
+#   -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
+# See zconf.h for details about the memory requirements.
+
+# ------------- Microsoft C 5.1 and later -------------
+
+#    Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7)
+#    should be added to the environment via "set LOCAL_ZLIB=-DFOO" or added
+#    to the declaration of LOC here:
+LOC = $(LOCAL_ZLIB)
+
+# Type for CPU required: 0: 8086, 1: 80186, 2: 80286, 3: 80386, etc.
+CPU_TYP = 0
+
+# Memory model: one of S, M, C, L (small, medium, compact, large)
+MODEL=L
+
+CC=cl
+CFLAGS=-nologo -A$(MODEL) -G$(CPU_TYP) -W3 -Oait -Gs $(LOC)
+#-Ox generates bad code with MSC 5.1
+LIB_CFLAGS=-Zl $(CFLAGS)
+
+LD=link
+LDFLAGS=/noi/e/st:0x1500/noe/farcall/packcode
+# "/farcall/packcode" are only useful for `large code' memory models
+# but should be a "no-op" for small code models.
+
+O=.obj
+
+# variables
+OBJ1 = adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) \
+  trees$(O)
+OBJP1 = adler32$(O)+compress$(O)+crc32$(O)+gzio$(O)+uncompr$(O)+deflate$(O)+\
+  trees$(O)
+OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
+  infutil$(O) inffast$(O)
+OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
+  infutil$(O)+inffast$(O)
+
+ZLIB_H = zlib.h zconf.h
+ZUTIL_H = zutil.h $(ZLIB_H)
+
+ZLIB_LIB = zlib_$(MODEL).lib
+
+all:  $(ZLIB_LIB) example.exe minigzip.exe
+
+# individual dependencies and action rules:
+adler32.obj: adler32.c $(ZLIB_H)
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+compress.obj: compress.c $(ZLIB_H)
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+crc32.obj: crc32.c $(ZLIB_H)
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+deflate.obj: deflate.c deflate.h $(ZUTIL_H)
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+gzio.obj: gzio.c $(ZUTIL_H)
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+infblock.obj: infblock.c $(ZUTIL_H) infblock.h inftrees.h infcodes.h infutil.h
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+infcodes.obj: infcodes.c $(ZUTIL_H) inftrees.h infutil.h infcodes.h inffast.h
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+inflate.obj: inflate.c $(ZUTIL_H) infblock.h
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+inftrees.obj: inftrees.c $(ZUTIL_H) inftrees.h
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+infutil.obj: infutil.c $(ZUTIL_H) inftrees.h infutil.h
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+inffast.obj: inffast.c $(ZUTIL_H) inftrees.h infutil.h inffast.h
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+trees.obj: trees.c deflate.h $(ZUTIL_H)
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+uncompr.obj: uncompr.c $(ZLIB_H)
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+zutil.obj: zutil.c $(ZUTIL_H)
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+example.obj: example.c $(ZLIB_H)
+	$(CC) -c $(CFLAGS) $*.c
+
+minigzip.obj: minigzip.c $(ZLIB_H)
+	$(CC) -c $(CFLAGS) $*.c
+
+# we must cut the command line to fit in the MS/DOS 128 byte limit:
+$(ZLIB_LIB): $(OBJ1) $(OBJ2)
+	if exist $(ZLIB_LIB) del $(ZLIB_LIB)
+	lib $(ZLIB_LIB) $(OBJ1);
+	lib $(ZLIB_LIB) $(OBJ2);
+
+example.exe: example.obj $(ZLIB_LIB)
+	$(LD) $(LDFLAGS) example.obj,,,$(ZLIB_LIB);
+
+minigzip.exe: minigzip.obj $(ZLIB_LIB)
+	$(LD) $(LDFLAGS) minigzip.obj,,,$(ZLIB_LIB);
+
+test: example.exe minigzip.exe
+	example
+	echo hello world | minigzip | minigzip -d 
+
+#clean:
+#	del *.obj
+#	del *.exe

msdos/Makefile.tc

@@ -13,13 +13,13 @@
 # See zconf.h for details about the memory requirements.
 
 # ------------- Turbo C 2.0 -------------
-MODEL=-ml
+MODEL=l
-# CFLAGS=-O2 -G -Z $(MODEL) -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
+# CFLAGS=-O2 -G -Z -m$(MODEL) -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
-CFLAGS=-O2 -G -Z $(MODEL)
+CFLAGS=-O2 -G -Z -m$(MODEL)
 CC=tcc -I\tc\include
 LD=tcc -L\tc\lib
-LIB=tlib
+AR=tlib
-LDFLAGS=$(MODEL) -f-
+LDFLAGS=-m$(MODEL) -f-
 O=.obj
 
 # variables
@@ -32,69 +32,72 @@ OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
 OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
   infutil$(O)+inffast$(O)
 
+ZLIB_H = zlib.h zconf.h
+ZUTIL_H = zutil.h $(ZLIB_H)
+
+ZLIB_LIB = zlib_$(MODEL).lib
+
 all: test
 
-adler32.obj: adler32.c zutil.h zlib.h zconf.h
+adler32.obj: adler32.c $(ZLIB_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-compress.obj: compress.c zlib.h zconf.h
+compress.obj: compress.c $(ZLIB_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-crc32.obj: crc32.c zutil.h zlib.h zconf.h
+crc32.obj: crc32.c $(ZLIB_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+deflate.obj: deflate.c deflate.h $(ZUTIL_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-gzio.obj: gzio.c zutil.h zlib.h zconf.h
+gzio.obj: gzio.c $(ZUTIL_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h\
+infblock.obj: infblock.c $(ZUTIL_H) infblock.h inftrees.h infcodes.h infutil.h
-   infcodes.h infutil.h
 	$(CC) -c $(CFLAGS) $*.c
 
-infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h\
+infcodes.obj: infcodes.c $(ZUTIL_H) inftrees.h infutil.h infcodes.h inffast.h
-   infcodes.h inffast.h
 	$(CC) -c $(CFLAGS) $*.c
 
-inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
+inflate.obj: inflate.c $(ZUTIL_H) infblock.h
 	$(CC) -c $(CFLAGS) $*.c
 
-inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+inftrees.obj: inftrees.c $(ZUTIL_H) inftrees.h
 	$(CC) -c $(CFLAGS) $*.c
 
-infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
+infutil.obj: infutil.c $(ZUTIL_H) inftrees.h infutil.h
 	$(CC) -c $(CFLAGS) $*.c
 
-inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+inffast.obj: inffast.c $(ZUTIL_H) inftrees.h infutil.h inffast.h
 	$(CC) -c $(CFLAGS) $*.c
 
-trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
+trees.obj: trees.c deflate.h $(ZUTIL_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-uncompr.obj: uncompr.c zlib.h zconf.h
+uncompr.obj: uncompr.c $(ZLIB_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-zutil.obj: zutil.c zutil.h zlib.h zconf.h
+zutil.obj: zutil.c $(ZUTIL_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-example.obj: example.c zlib.h zconf.h
+example.obj: example.c $(ZLIB_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-minigzip.obj: minigzip.c zlib.h zconf.h
+minigzip.obj: minigzip.c $(ZLIB_H)
 	$(CC) -c $(CFLAGS) $*.c
 
 # we must cut the command line to fit in the MS/DOS 128 byte limit:
-zlib.lib: $(OBJ1) $(OBJ2)
+$(ZLIB_LIB): $(OBJ1) $(OBJ2)
-	del zlib.lib
+	del $(ZLIB_LIB)
-	$(LIB) zlib +$(OBJP1)
+	$(AR) $(ZLIB_LIB) +$(OBJP1)
-	$(LIB) zlib +$(OBJP2)
+	$(AR) $(ZLIB_LIB) +$(OBJP2)
 
-example.exe: example.obj zlib.lib
+example.exe: example.obj $(ZLIB_LIB)
-	$(LD) $(LDFLAGS) -eexample.exe example.obj zlib.lib
+	$(LD) $(LDFLAGS) -eexample.exe example.obj $(ZLIB_LIB)
 
-minigzip.exe: minigzip.obj zlib.lib
+minigzip.exe: minigzip.obj $(ZLIB_LIB)
-	$(LD) $(LDFLAGS) -eminigzip.exe minigzip.obj zlib.lib
+	$(LD) $(LDFLAGS) -eminigzip.exe minigzip.obj $(ZLIB_LIB)
 
 test: example.exe minigzip.exe
 	example

msdos/Makefile.w32

@@ -1,21 +1,19 @@
 # Makefile for zlib
-# Microsoft C 5.1 or later
+# Microsoft 32-bit Visual C++ 4.0 or later (may work on earlier versions)
 
-# To use, do "make makefile.msc"
+# To use, do "nmake /f makefile.w32"
-# To compile in small model, set below: MODEL=-AS
 
 # If you wish to reduce the memory requirements (default 256K for big
 # objects plus a few K), you can add to CFLAGS below: 
 #   -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
 # See zconf.h for details about the memory requirements.
 
-# ------------- Microsoft C 5.1 and later -------------
+# ------------- Microsoft Visual C++ 4.0 and later -------------
-MODEL=-AL
+MODEL=
-CFLAGS=-Oait -Gs -nologo -W3 $(MODEL)
+CFLAGS=-Ox -GA3s -nologo -W3
-#-Ox generates bad code with MSC 5.1
 CC=cl
 LD=link
-LDFLAGS=/e/st:0x1000/noe
+LDFLAGS=
 O=.obj
 
 # variables
@@ -28,72 +26,72 @@ OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
 OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
   infutil$(O)+inffast$(O)
 
-adler32.obj: adler32.c zutil.h zlib.h zconf.h
+all:  zlib.lib example.exe minigzip.exe
-	$(CC) -c $(CFLAGS) $*.c
+
+adler32.obj: adler32.c zlib.h zconf.h
+  $(CC) -c $(CFLAGS) $*.c
 
 compress.obj: compress.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
-crc32.obj: crc32.c zutil.h zlib.h zconf.h
+crc32.obj: crc32.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
 deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
 gzio.obj: gzio.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
 infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h\
    infcodes.h infutil.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
 infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h\
    infcodes.h inffast.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
 inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
 inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
 infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
 inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
 trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
 uncompr.obj: uncompr.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
 zutil.obj: zutil.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
 example.obj: example.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
 minigzip.obj: minigzip.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
-# we must cut the command line to fit in the MS/DOS 128 byte limit:
 zlib.lib: $(OBJ1) $(OBJ2)
-        del zlib.lib
+  if exist zlib.lib del zlib.lib
-	lib zlib $(OBJ1);
+  lib /OUT:zlib.lib $(OBJ1) $(OBJ2)
-	lib zlib $(OBJ2);
 
 example.exe: example.obj zlib.lib
-	$(LD) $(LDFLAGS) example.obj,,,zlib.lib;
+  $(LD) $(LDFLAGS) example.obj zlib.lib /OUT:example.exe /SUBSYSTEM:CONSOLE
 
 minigzip.exe: minigzip.obj zlib.lib
-	$(LD) $(LDFLAGS) minigzip.obj,,,zlib.lib;
+  $(LD) $(LDFLAGS) minigzip.obj zlib.lib /OUT:minigzip.exe /SUBSYSTEM:CONSOLE
 
 test: example.exe minigzip.exe
-	example
+  example
-	echo hello world | minigzip | minigzip -d 
+  echo hello world | minigzip | minigzip -d 
 
 #clean:
-#	del *.obj
+#  del *.obj
-#	del *.exe
+#  del *.exe

msdos/Makefile.wat

@@ -0,0 +1,103 @@
+# Makefile for zlib
+# Watcom 10a
+
+# This version of the zlib makefile was adapted by Chris Young for use
+# with Watcom 10a 32-bit protected mode flat memory model.  It was created 
+# for use with POV-Ray ray tracer and you may choose to edit the CFLAGS to 
+# suit your needs but the -DMSDOS is required.
+# -- Chris Young 76702.1655@compuserve.com
+
+# To use, do "wmake -f makefile.wat"
+
+# See zconf.h for details about the memory requirements.
+
+# ------------- Watcom 10a -------------
+MODEL=-mf 
+CFLAGS= $(MODEL) -fpi87 -fp5 -zp4 -5r -w5 -oneatx -DMSDOS
+CC=wcc386
+LD=wcl386
+LIB=wlib -b -c 
+LDFLAGS= 
+O=.obj
+
+# variables
+OBJ1=adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) 
+OBJ2=trees$(O) zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) 
+OBJ3=infutil$(O) inffast$(O)
+OBJP1=adler32$(O)+compress$(O)+crc32$(O)+gzio$(O)+uncompr$(O)+deflate$(O)
+OBJP2=trees$(O)+zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)
+OBJP3=infutil$(O)+inffast$(O)
+
+all: test
+
+adler32.obj: adler32.c zlib.h zconf.h
+	$(CC) $(CFLAGS) $*.c
+
+compress.obj: compress.c zlib.h zconf.h
+	$(CC) $(CFLAGS) $*.c
+
+crc32.obj: crc32.c zlib.h zconf.h
+	$(CC) $(CFLAGS) $*.c
+
+deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+	$(CC) $(CFLAGS) $*.c
+
+gzio.obj: gzio.c zutil.h zlib.h zconf.h
+	$(CC) $(CFLAGS) $*.c
+
+infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h &
+  infcodes.h infutil.h
+	$(CC) $(CFLAGS) $*.c
+
+infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h &
+  infcodes.h inffast.h
+	$(CC) $(CFLAGS) $*.c
+
+inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
+	$(CC) $(CFLAGS) $*.c
+
+inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+	$(CC) $(CFLAGS) $*.c
+
+infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
+	$(CC) $(CFLAGS) $*.c
+
+inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+	$(CC) $(CFLAGS) $*.c
+
+trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
+	$(CC) $(CFLAGS) $*.c
+
+uncompr.obj: uncompr.c zlib.h zconf.h
+	$(CC) $(CFLAGS) $*.c
+
+zutil.obj: zutil.c zutil.h zlib.h zconf.h
+	$(CC) $(CFLAGS) $*.c
+
+example.obj: example.c zlib.h zconf.h
+	$(CC) $(CFLAGS) $*.c
+
+minigzip.obj: minigzip.c zlib.h zconf.h
+	$(CC) $(CFLAGS) $*.c
+
+# we must cut the command line to fit in the MS/DOS 128 byte limit:
+zlib.lib: $(OBJ1) $(OBJ2) $(OBJ3) 
+	del zlib.lib
+	$(LIB) zlib.lib +$(OBJP1)
+	$(LIB) zlib.lib +$(OBJP2)
+	$(LIB) zlib.lib +$(OBJP3)
+
+example.exe: example.obj zlib.lib
+	$(LD) $(LDFLAGS) example.obj zlib.lib
+
+minigzip.exe: minigzip.obj zlib.lib
+	$(LD) $(LDFLAGS) minigzip.obj zlib.lib
+
+test: minigzip.exe example.exe
+	example
+	echo hello world | minigzip | minigzip -d >test
+	type test
+
+#clean:
+#	del *.obj
+#	del *.exe

msdos/zlib.def

@@ -0,0 +1,60 @@
+LIBRARY		"zlib"
+
+DESCRIPTION	'"""zlib data compression library"""'
+
+EXETYPE		NT
+
+SUBSYSTEM	WINDOWS
+
+STUB		'WINSTUB.EXE'
+
+VERSION		1.13
+
+CODE		 EXECUTE READ
+
+DATA		 READ WRITE
+
+HEAPSIZE	1048576,4096
+
+EXPORTS
+    adler32                        @1
+    compress                       @2
+    crc32                          @3
+    deflate                        @4
+    deflateCopy                    @5
+    deflateEnd                     @6
+    deflateInit2_                  @7
+    deflateInit_                   @8
+    deflateParams                  @9
+    deflateReset                   @10
+    deflateSetDictionary           @11
+    gzclose                        @12
+    gzdopen                        @13
+    gzerror                        @14
+    gzflush                        @15
+    gzopen                         @16
+    gzread                         @17
+    gzwrite                        @18
+    inflate                        @19
+    inflateEnd                     @20
+    inflateInit2_                  @21
+    inflateInit_                   @22
+    inflateReset                   @23
+    inflateSetDictionary           @24
+    inflateSync                    @25
+    uncompress                     @26
+    zlibVersion                    @27
+    gzprintf                       @28
+    gzputc                         @29
+    gzgetc                         @30
+    gzseek                         @31
+    gzrewind                       @32
+    gztell                         @33
+    gzeof                          @34
+    gzsetparams                    @35
+    zError                         @36
+    inflateSyncPoint               @37
+    get_crc_table                  @38
+    compress2                      @39
+    gzputs                         @40
+    gzgets                         @41

msdos/zlib.rc

@@ -0,0 +1,32 @@
+#include <windows.h>
+
+#define IDR_VERSION1  1
+IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
+  FILEVERSION	 1,1,3,0
+  PRODUCTVERSION 1,1,3,0
+  FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
+  FILEFLAGS	0
+  FILEOS	VOS_DOS_WINDOWS32
+  FILETYPE	VFT_DLL
+  FILESUBTYPE	0	// not used
+BEGIN
+  BLOCK "StringFileInfo"
+  BEGIN
+    BLOCK "040904E4"
+    //language ID = U.S. English, char set = Windows, Multilingual
+
+    BEGIN
+      VALUE "FileDescription", "zlib data compression library\0"
+      VALUE "FileVersion",	"1.1.3\0"
+      VALUE "InternalName",	"zlib\0"
+      VALUE "OriginalFilename",	"zlib.dll\0"
+      VALUE "ProductName",	"ZLib.DLL\0"
+      VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
+      VALUE "LegalCopyright", "(C) 1995-1998 Jean-loup Gailly & Mark Adler\0"
+    END
+  END
+  BLOCK "VarFileInfo"
+  BEGIN
+    VALUE "Translation", 0x0409, 1252
+  END
+END

nt/Makefile.emx

@@ -0,0 +1,138 @@
+# Makefile for zlib.  Modified for emx/rsxnt by Chr. Spieler, 6/16/98.
+# Copyright (C) 1995-1998 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h 
+
+# To compile, or to compile and test, type:
+# 
+#   make -fmakefile.emx;  make test -fmakefile.emx
+# 
+
+CC=gcc -Zwin32
+
+#CFLAGS=-MMD -O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-MMD -g -DDEBUG
+CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+             -Wstrict-prototypes -Wmissing-prototypes
+
+# If cp.exe is available, replace "copy /Y" with "cp -fp" .
+CP=copy /Y
+# If gnu install.exe is available, replace $(CP) with ginstall.
+INSTALL=$(CP)
+# The default value of RM is "rm -f."  If "rm.exe" is found, comment out:
+RM=del
+LDLIBS=-L. -lzlib
+LD=$(CC) -s -o
+LDSHARED=$(CC)
+
+INCL=zlib.h zconf.h
+LIBS=zlib.a
+
+AR=ar rcs
+
+prefix=/usr/local
+exec_prefix = $(prefix)
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example.exe minigzip.exe
+
+test: all
+	./example
+	echo hello world | .\minigzip | .\minigzip -d 
+
+%.o : %.c
+	$(CC) $(CFLAGS) -c $< -o $@
+
+zlib.a: $(OBJS)
+	$(AR) $@ $(OBJS)
+
+%.exe : %.o $(LIBS)
+	$(LD) $@ $< $(LDLIBS)
+
+
+.PHONY : clean
+
+clean:
+	$(RM) *.d
+	$(RM) *.o
+	$(RM) *.exe
+	$(RM) zlib.a
+	$(RM) foo.gz
+
+DEPS := $(wildcard *.d)
+ifneq ($(DEPS),)
+include $(DEPS)
+endif
+# Makefile for zlib.  Modified for emx 0.9c by Chr. Spieler, 6/17/98.
+# Copyright (C) 1995-1998 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h 
+
+# To compile, or to compile and test, type:
+# 
+#   make -fmakefile.emx;  make test -fmakefile.emx
+# 
+
+CC=gcc
+
+#CFLAGS=-MMD -O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-MMD -g -DDEBUG
+CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+             -Wstrict-prototypes -Wmissing-prototypes
+
+# If cp.exe is available, replace "copy /Y" with "cp -fp" .
+CP=copy /Y
+# If gnu install.exe is available, replace $(CP) with ginstall.
+INSTALL=$(CP)
+# The default value of RM is "rm -f."  If "rm.exe" is found, comment out:
+RM=del
+LDLIBS=-L. -lzlib
+LD=$(CC) -s -o
+LDSHARED=$(CC)
+
+INCL=zlib.h zconf.h
+LIBS=zlib.a
+
+AR=ar rcs
+
+prefix=/usr/local
+exec_prefix = $(prefix)
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example.exe minigzip.exe
+
+test: all
+	./example
+	echo hello world | .\minigzip | .\minigzip -d 
+
+%.o : %.c
+	$(CC) $(CFLAGS) -c $< -o $@
+
+zlib.a: $(OBJS)
+	$(AR) $@ $(OBJS)
+
+%.exe : %.o $(LIBS)
+	$(LD) $@ $< $(LDLIBS)
+
+
+.PHONY : clean
+
+clean:
+	$(RM) *.d
+	$(RM) *.o
+	$(RM) *.exe
+	$(RM) zlib.a
+	$(RM) foo.gz
+
+DEPS := $(wildcard *.d)
+ifneq ($(DEPS),)
+include $(DEPS)
+endif

nt/Makefile.gcc

@@ -0,0 +1,87 @@
+# Makefile for zlib.  Modified for mingw32 by C. Spieler, 6/16/98.
+# (This Makefile is directly derived from Makefile.dj2)
+# Copyright (C) 1995-1998 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h 
+
+# To compile, or to compile and test, type:
+# 
+#   make -fmakefile.gcc;  make test -fmakefile.gcc
+# 
+# To install libz.a, zconf.h and zlib.h in the mingw32 directories, type:
+# 
+#    make install -fmakefile.gcc
+# 
+
+CC=gcc
+
+#CFLAGS=-MMD -O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-MMD -g -DDEBUG
+CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+             -Wstrict-prototypes -Wmissing-prototypes
+
+# If cp.exe is available, replace "copy /Y" with "cp -fp" .
+CP=copy /Y
+# If gnu install.exe is available, replace $(CP) with ginstall.
+INSTALL=$(CP)
+# The default value of RM is "rm -f."  If "rm.exe" is found, comment out:
+RM=del
+LDLIBS=-L. -lz
+LD=$(CC) -s -o
+LDSHARED=$(CC)
+
+INCL=zlib.h zconf.h
+LIBS=libz.a
+
+AR=ar rcs
+
+prefix=/usr/local
+exec_prefix = $(prefix)
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example.exe minigzip.exe
+
+test: all
+	./example
+	echo hello world | .\minigzip | .\minigzip -d 
+
+%.o : %.c
+	$(CC) $(CFLAGS) -c $< -o $@
+
+libz.a: $(OBJS)
+	$(AR) $@ $(OBJS)
+
+%.exe : %.o $(LIBS)
+	$(LD) $@ $< $(LDLIBS)
+
+# INCLUDE_PATH and LIBRARY_PATH were set for [make] in djgpp.env .
+
+.PHONY : uninstall clean
+
+install: $(INCL) $(LIBS)
+	-@if not exist $(INCLUDE_PATH)\nul mkdir $(INCLUDE_PATH)
+	-@if not exist $(LIBRARY_PATH)\nul mkdir $(LIBRARY_PATH)
+	$(INSTALL) zlib.h $(INCLUDE_PATH)
+	$(INSTALL) zconf.h $(INCLUDE_PATH)
+	$(INSTALL) libz.a $(LIBRARY_PATH)
+
+uninstall:
+	$(RM) $(INCLUDE_PATH)\zlib.h
+	$(RM) $(INCLUDE_PATH)\zconf.h
+	$(RM) $(LIBRARY_PATH)\libz.a
+
+clean:
+	$(RM) *.d
+	$(RM) *.o
+	$(RM) *.exe
+	$(RM) libz.a
+	$(RM) foo.gz
+
+DEPS := $(wildcard *.d)
+ifneq ($(DEPS),)
+include $(DEPS)
+endif

nt/Makefile.nt

@@ -0,0 +1,88 @@
+# Makefile for zlib
+
+!include <ntwin32.mak>
+
+CC=cl
+LD=link
+CFLAGS=-O -nologo
+LDFLAGS=
+O=.obj
+
+# variables
+OBJ1 = adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) \
+  trees$(O)
+OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
+  infutil$(O) inffast$(O)
+
+all:  zlib.dll example.exe minigzip.exe
+
+adler32.obj: adler32.c zutil.h zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+compress.obj: compress.c zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+crc32.obj: crc32.c zutil.h zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+gzio.obj: gzio.c zutil.h zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h\
+   infcodes.h infutil.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h\
+   infcodes.h inffast.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+uncompr.obj: uncompr.c zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+zutil.obj: zutil.c zutil.h zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+example.obj: example.c zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+minigzip.obj: minigzip.c zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+zlib.dll: $(OBJ1) $(OBJ2) zlib.dnt
+	link $(dlllflags) -out:$@ -def:zlib.dnt $(OBJ1) $(OBJ2) $(guilibsdll)
+
+zlib.lib: zlib.dll
+
+example.exe: example.obj zlib.lib
+	$(LD) $(LDFLAGS) example.obj zlib.lib
+
+minigzip.exe: minigzip.obj zlib.lib
+	$(LD) $(LDFLAGS) minigzip.obj zlib.lib
+
+test: example.exe minigzip.exe
+	example
+	echo hello world | minigzip | minigzip -d 
+
+clean:
+	del *.obj
+	del *.exe
+	del *.dll
+	del *.lib

nt/zlib.dnt

@@ -0,0 +1,47 @@
+LIBRARY		zlib.dll
+EXETYPE WINDOWS
+CODE		 PRELOAD MOVEABLE DISCARDABLE
+DATA		 PRELOAD MOVEABLE MULTIPLE
+
+EXPORTS
+    adler32                        @1
+    compress                       @2
+    crc32                          @3
+    deflate                        @4
+    deflateCopy                    @5
+    deflateEnd                     @6
+    deflateInit2_                  @7
+    deflateInit_                   @8
+    deflateParams                  @9
+    deflateReset                   @10
+    deflateSetDictionary           @11
+    gzclose                        @12
+    gzdopen                        @13
+    gzerror                        @14
+    gzflush                        @15
+    gzopen                         @16
+    gzread                         @17
+    gzwrite                        @18
+    inflate                        @19
+    inflateEnd                     @20
+    inflateInit2_                  @21
+    inflateInit_                   @22
+    inflateReset                   @23
+    inflateSetDictionary           @24
+    inflateSync                    @25
+    uncompress                     @26
+    zlibVersion                    @27
+    gzprintf                       @28
+    gzputc                         @29
+    gzgetc                         @30
+    gzseek                         @31
+    gzrewind                       @32
+    gztell                         @33
+    gzeof                          @34
+    gzsetparams                    @35
+    zError                         @36
+    inflateSyncPoint               @37
+    get_crc_table                  @38
+    compress2                      @39
+    gzputs                         @40
+    gzgets                         @41

os2/Makefile.os2

@@ -0,0 +1,136 @@
+# Makefile for zlib under OS/2 using GCC (PGCC)
+# For conditions of distribution and use, see copyright notice in zlib.h 
+
+# To compile and test, type:
+#   cp Makefile.os2 ..
+#   cd ..
+#   make -f Makefile.os2 test
+
+# This makefile will build a static library z.lib, a shared library
+# z.dll and a import library zdll.lib. You can use either z.lib or
+# zdll.lib by specifying either -lz or -lzdll on gcc's command line
+
+CC=gcc -Zomf -s
+
+CFLAGS=-O6 -Wall
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-g -DDEBUG
+#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+#           -Wstrict-prototypes -Wmissing-prototypes
+
+#################### BUG WARNING: #####################
+## infcodes.c hits a bug in pgcc-1.0, so you have to use either
+## -O# where # <= 4 or one of (-fno-ommit-frame-pointer or -fno-force-mem)
+## This bug is reportedly fixed in pgcc >1.0, but this was not tested
+CFLAGS+=-fno-force-mem
+
+LDFLAGS=-s -L. -lzdll -Zcrtdll
+LDSHARED=$(CC) -s -Zomf -Zdll -Zcrtdll
+
+VER=1.1.0
+ZLIB=z.lib
+SHAREDLIB=z.dll
+SHAREDLIBIMP=zdll.lib
+LIBS=$(ZLIB) $(SHAREDLIB) $(SHAREDLIBIMP)
+
+AR=emxomfar cr
+IMPLIB=emximp
+RANLIB=echo
+TAR=tar
+SHELL=bash
+
+prefix=/usr/local
+exec_prefix = $(prefix)
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+DISTFILES = README INDEX ChangeLog configure Make*[a-z0-9] *.[ch] descrip.mms \
+  algorithm.txt zlib.3 msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \
+  nt/Makefile.nt nt/zlib.dnt  contrib/README.contrib contrib/*.txt \
+  contrib/asm386/*.asm contrib/asm386/*.c \
+  contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/iostream/*.cpp \
+  contrib/iostream/*.h  contrib/iostream2/*.h contrib/iostream2/*.cpp \
+  contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32
+
+all: example.exe minigzip.exe
+
+test: all
+	@LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
+	echo hello world | ./minigzip | ./minigzip -d || \
+	  echo '		*** minigzip test FAILED ***' ; \
+	if ./example; then \
+	  echo '		*** zlib test OK ***'; \
+	else \
+	  echo '		*** zlib test FAILED ***'; \
+	fi
+
+$(ZLIB): $(OBJS)
+	$(AR) $@ $(OBJS)
+	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
+
+$(SHAREDLIB): $(OBJS) os2/z.def
+	$(LDSHARED) -o $@ $^
+
+$(SHAREDLIBIMP): os2/z.def
+	$(IMPLIB) -o $@ $^
+
+example.exe: example.o $(LIBS)
+	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
+
+minigzip.exe: minigzip.o $(LIBS)
+	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
+
+clean:
+	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz
+
+distclean:	clean
+
+zip:
+	mv Makefile Makefile~; cp -p Makefile.in Makefile
+	rm -f test.c ztest*.c
+	v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
+	zip -ul9 zlib$$v $(DISTFILES)
+	mv Makefile~ Makefile
+
+dist:
+	mv Makefile Makefile~; cp -p Makefile.in Makefile
+	rm -f test.c ztest*.c
+	d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
+	rm -f $$d.tar.gz; \
+	if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \
+	files=""; \
+	for f in $(DISTFILES); do files="$$files $$d/$$f"; done; \
+	cd ..; \
+	GZIP=-9 $(TAR) chofz $$d/$$d.tar.gz $$files; \
+	if test ! -d $$d; then rm -f $$d; fi
+	mv Makefile~ Makefile
+
+tags:	
+	etags *.[ch]
+
+depend:
+	makedepend -- $(CFLAGS) -- *.[ch]
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzio.o: zutil.h zlib.h zconf.h
+infblock.o: infblock.h inftrees.h infcodes.h infutil.h zutil.h zlib.h zconf.h
+infcodes.o: zutil.h zlib.h zconf.h
+infcodes.o: inftrees.h infblock.h infcodes.h infutil.h inffast.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h
+inffast.o: infblock.h infcodes.h infutil.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h infblock.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
+minigzip.o:  zlib.h zconf.h 
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h  

os2/zlib.def

@@ -0,0 +1,51 @@
+;
+; Slightly modified version of ../nt/zlib.dnt :-)
+;
+
+LIBRARY		Z
+DESCRIPTION	"Zlib compression library for OS/2"
+CODE		PRELOAD MOVEABLE DISCARDABLE
+DATA		PRELOAD MOVEABLE MULTIPLE
+
+EXPORTS
+    adler32
+    compress
+    crc32
+    deflate
+    deflateCopy
+    deflateEnd
+    deflateInit2_
+    deflateInit_
+    deflateParams
+    deflateReset
+    deflateSetDictionary
+    gzclose
+    gzdopen
+    gzerror
+    gzflush
+    gzopen
+    gzread
+    gzwrite
+    inflate
+    inflateEnd
+    inflateInit2_
+    inflateInit_
+    inflateReset
+    inflateSetDictionary
+    inflateSync
+    uncompress
+    zlibVersion
+    gzprintf
+    gzputc
+    gzgetc
+    gzseek
+    gzrewind
+    gztell
+    gzeof
+    gzsetparams
+    zError
+    inflateSyncPoint
+    get_crc_table
+    compress2
+    gzputs
+    gzgets

trees.c

@@ -1,5 +1,5 @@
 /* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995 Jean-loup Gailly
+ * Copyright (C) 1995-1998 Jean-loup Gailly
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -29,7 +29,9 @@
  *          Addison-Wesley, 1983. ISBN 0-201-06672-6.
  */
 
-/* $Id: trees.c,v 1.5 1995/05/03 17:27:12 jloup Exp $ */
+/* @(#) $Id$ */
+
+/* #define GEN_TREES_H */
 
 #include "deflate.h"
 
@@ -56,16 +58,16 @@
 #define REPZ_11_138  18
 /* repeat a zero length 11-138 times  (7 bits of repeat count) */
 
-local int extra_lbits[LENGTH_CODES] /* extra bits for each length code */
+local const int extra_lbits[LENGTH_CODES] /* extra bits for each length code */
    = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0};
 
-local int extra_dbits[D_CODES] /* extra bits for each distance code */
+local const int extra_dbits[D_CODES] /* extra bits for each distance code */
    = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13};
 
-local int extra_blbits[BL_CODES]/* extra bits for each bit length code */
+local const int extra_blbits[BL_CODES]/* extra bits for each bit length code */
    = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7};
 
-local uch bl_order[BL_CODES]
+local const uch bl_order[BL_CODES]
    = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15};
 /* The lengths of the bit length codes are sent in order of decreasing
  * probability, to avoid transmitting the lengths for unused bit length codes.
@@ -80,10 +82,15 @@ local uch bl_order[BL_CODES]
  * Local data. These are initialized only once.
  */
 
+#define DIST_CODE_LEN  512 /* see definition of array dist_code below */
+
+#if defined(GEN_TREES_H) || !defined(STDC)
+/* non ANSI compilers may not accept trees.h */
+
 local ct_data static_ltree[L_CODES+2];
 /* The static literal tree. Since the bit lengths are imposed, there is no
  * need for the L_CODES extra codes used during heap construction. However
- * The codes 286 and 287 are needed to build a canonical tree (see tr_init
+ * The codes 286 and 287 are needed to build a canonical tree (see _tr_init
  * below).
  */
 
@@ -92,13 +99,13 @@ local ct_data static_dtree[D_CODES];
  * 5 bits.)
  */
 
-local uch dist_code[512];
+uch _dist_code[DIST_CODE_LEN];
-/* distance codes. The first 256 values correspond to the distances
+/* Distance codes. The first 256 values correspond to the distances
  * 3 .. 258, the last 256 values correspond to the top 8 bits of
  * the 15 bit distances.
  */
 
-local uch length_code[MAX_MATCH-MIN_MATCH+1];
+uch _length_code[MAX_MATCH-MIN_MATCH+1];
 /* length code for each normalized match length (0 == MIN_MATCH) */
 
 local int base_length[LENGTH_CODES];
@@ -107,9 +114,13 @@ local int base_length[LENGTH_CODES];
 local int base_dist[D_CODES];
 /* First normalized distance for each code (0 = distance of 1) */
 
+#else
+#  include "trees.h"
+#endif /* GEN_TREES_H */
+
 struct static_tree_desc_s {
-    ct_data *static_tree;        /* static tree or NULL */
+    const ct_data *static_tree;  /* static tree or NULL */
-    intf    *extra_bits;         /* extra bits for each code or NULL */
+    const intf *extra_bits;      /* extra bits for each code or NULL */
     int     extra_base;          /* base index for extra_bits */
     int     elems;               /* max number of elements in the tree */
     int     max_length;          /* max bit length for the codes */
@@ -122,7 +133,7 @@ local static_tree_desc  static_d_desc =
 {static_dtree, extra_dbits, 0,          D_CODES, MAX_BITS};
 
 local static_tree_desc  static_bl_desc =
-{(ct_data *)0, extra_blbits, 0,      BL_CODES, MAX_BL_BITS};
+{(const ct_data *)0, extra_blbits, 0,   BL_CODES, MAX_BL_BITS};
 
 /* ===========================================================================
  * Local (static) routines in this file.
@@ -148,23 +159,20 @@ local void bi_flush       OF((deflate_state *s));
 local void copy_block     OF((deflate_state *s, charf *buf, unsigned len,
                               int header));
 
+#ifdef GEN_TREES_H
+local void gen_trees_header OF((void));
+#endif
+
 #ifndef DEBUG
 #  define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len)
    /* Send a code of the given tree. c and tree must not have side effects */
 
 #else /* DEBUG */
 #  define send_code(s, c, tree) \
-     { if (verbose>1) fprintf(stderr,"\ncd %3d ",(c)); \
+     { if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \
        send_bits(s, tree[c].Code, tree[c].Len); }
 #endif
 
-#define d_code(dist) \
-   ((dist) < 256 ? dist_code[dist] : dist_code[256+((dist)>>7)])
-/* Mapping from a distance to a distance code. dist is the distance - 1 and
- * must not have side effects. dist_code[256] and dist_code[257] are never
- * used.
- */
-
 /* ===========================================================================
  * Output a short LSB first on the stream.
  * IN assertion: there is enough room in pendingBuf.
@@ -226,13 +234,12 @@ local void send_bits(s, value, length)
 /* the arguments must not have side effects */
 
 /* ===========================================================================
- * Initialize the various 'constant' tables. In a multi-threaded environment,
+ * Initialize the various 'constant' tables.
- * this function may be called by two threads concurrently, but this is
- * harmless since both invocations do exactly the same thing.
  */
 local void tr_static_init()
 {
-    static static_init_done = 0;
+#if defined(GEN_TREES_H) || !defined(STDC)
+    static int static_init_done = 0;
     int n;        /* iterates over tree elements */
     int bits;     /* bit counter */
     int length;   /* length value */
@@ -243,12 +250,19 @@ local void tr_static_init()
 
     if (static_init_done) return;
 
+    /* For some embedded targets, global variables are not initialized: */
+    static_l_desc.static_tree = static_ltree;
+    static_l_desc.extra_bits = extra_lbits;
+    static_d_desc.static_tree = static_dtree;
+    static_d_desc.extra_bits = extra_dbits;
+    static_bl_desc.extra_bits = extra_blbits;
+
     /* Initialize the mapping length (0..255) -> length code (0..28) */
     length = 0;
     for (code = 0; code < LENGTH_CODES-1; code++) {
         base_length[code] = length;
         for (n = 0; n < (1<<extra_lbits[code]); n++) {
-            length_code[length++] = (uch)code;
+            _length_code[length++] = (uch)code;
         }
     }
     Assert (length == 256, "tr_static_init: length != 256");
@@ -256,14 +270,14 @@ local void tr_static_init()
      * in two different ways: code 284 + 5 bits or code 285, so we
      * overwrite length_code[255] to use the best encoding:
      */
-    length_code[length-1] = (uch)code;
+    _length_code[length-1] = (uch)code;
 
     /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
     dist = 0;
     for (code = 0 ; code < 16; code++) {
         base_dist[code] = dist;
         for (n = 0; n < (1<<extra_dbits[code]); n++) {
-            dist_code[dist++] = (uch)code;
+            _dist_code[dist++] = (uch)code;
         }
     }
     Assert (dist == 256, "tr_static_init: dist != 256");
@@ -271,7 +285,7 @@ local void tr_static_init()
     for ( ; code < D_CODES; code++) {
         base_dist[code] = dist << 7;
         for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
-            dist_code[256 + dist++] = (uch)code;
+            _dist_code[256 + dist++] = (uch)code;
         }
     }
     Assert (dist == 256, "tr_static_init: 256+dist != 512");
@@ -292,21 +306,85 @@ local void tr_static_init()
     /* The static distance tree is trivial: */
     for (n = 0; n < D_CODES; n++) {
         static_dtree[n].Len = 5;
-        static_dtree[n].Code = bi_reverse(n, 5);
+        static_dtree[n].Code = bi_reverse((unsigned)n, 5);
     }
     static_init_done = 1;
+
+#  ifdef GEN_TREES_H
+    gen_trees_header();
+#  endif
+#endif /* defined(GEN_TREES_H) || !defined(STDC) */
 }
 
+/* ===========================================================================
+ * Genererate the file trees.h describing the static trees.
+ */
+#ifdef GEN_TREES_H
+#  ifndef DEBUG
+#    include <stdio.h>
+#  endif
+
+#  define SEPARATOR(i, last, width) \
+      ((i) == (last)? "\n};\n\n" :    \
+       ((i) % (width) == (width)-1 ? ",\n" : ", "))
+
+void gen_trees_header()
+{
+    FILE *header = fopen("trees.h", "w");
+    int i;
+
+    Assert (header != NULL, "Can't open trees.h");
+    fprintf(header,
+	    "/* header created automatically with -DGEN_TREES_H */\n\n");
+
+    fprintf(header, "local const ct_data static_ltree[L_CODES+2] = {\n");
+    for (i = 0; i < L_CODES+2; i++) {
+	fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code,
+		static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5));
+    }
+
+    fprintf(header, "local const ct_data static_dtree[D_CODES] = {\n");
+    for (i = 0; i < D_CODES; i++) {
+	fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code,
+		static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5));
+    }
+
+    fprintf(header, "const uch _dist_code[DIST_CODE_LEN] = {\n");
+    for (i = 0; i < DIST_CODE_LEN; i++) {
+	fprintf(header, "%2u%s", _dist_code[i],
+		SEPARATOR(i, DIST_CODE_LEN-1, 20));
+    }
+
+    fprintf(header, "const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
+    for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) {
+	fprintf(header, "%2u%s", _length_code[i],
+		SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20));
+    }
+
+    fprintf(header, "local const int base_length[LENGTH_CODES] = {\n");
+    for (i = 0; i < LENGTH_CODES; i++) {
+	fprintf(header, "%1u%s", base_length[i],
+		SEPARATOR(i, LENGTH_CODES-1, 20));
+    }
+
+    fprintf(header, "local const int base_dist[D_CODES] = {\n");
+    for (i = 0; i < D_CODES; i++) {
+	fprintf(header, "%5u%s", base_dist[i],
+		SEPARATOR(i, D_CODES-1, 10));
+    }
+
+    fclose(header);
+}
+#endif /* GEN_TREES_H */
+
 /* ===========================================================================
  * Initialize the tree data structures for a new zlib stream.
  */
-void tr_init(s)
+void _tr_init(s)
     deflate_state *s;
 {
     tr_static_init();
 
-    s->compressed_len = 0L;
-
     s->l_desc.dyn_tree = s->dyn_ltree;
     s->l_desc.stat_desc = &static_l_desc;
 
@@ -320,6 +398,7 @@ void tr_init(s)
     s->bi_valid = 0;
     s->last_eob_len = 8; /* enough lookahead for inflate */
 #ifdef DEBUG
+    s->compressed_len = 0L;
     s->bits_sent = 0L;
 #endif
 
@@ -413,12 +492,12 @@ local void gen_bitlen(s, desc)
     deflate_state *s;
     tree_desc *desc;    /* the tree descriptor */
 {
-    ct_data *tree  = desc->dyn_tree;
+    ct_data *tree        = desc->dyn_tree;
-    int max_code   = desc->max_code;
+    int max_code         = desc->max_code;
-    ct_data *stree = desc->stat_desc->static_tree;
+    const ct_data *stree = desc->stat_desc->static_tree;
-    intf *extra    = desc->stat_desc->extra_bits;
+    const intf *extra    = desc->stat_desc->extra_bits;
-    int base       = desc->stat_desc->extra_base;
+    int base             = desc->stat_desc->extra_base;
-    int max_length = desc->stat_desc->max_length;
+    int max_length       = desc->stat_desc->max_length;
     int h;              /* heap index */
     int n, m;           /* iterate over the tree elements */
     int bits;           /* bit length */
@@ -542,9 +621,9 @@ local void build_tree(s, desc)
     deflate_state *s;
     tree_desc *desc; /* the tree descriptor */
 {
-    ct_data *tree   = desc->dyn_tree;
+    ct_data *tree         = desc->dyn_tree;
-    ct_data *stree  = desc->stat_desc->static_tree;
+    const ct_data *stree  = desc->stat_desc->static_tree;
-    int elems       = desc->stat_desc->elems;
+    int elems             = desc->stat_desc->elems;
     int n, m;          /* iterate over heap elements */
     int max_code = -1; /* largest code with non zero frequency */
     int node;          /* new node being created */
@@ -785,16 +864,17 @@ local void send_all_trees(s, lcodes, dcodes, blcodes)
 /* ===========================================================================
  * Send a stored block
  */
-void tr_stored_block(s, buf, stored_len, eof)
+void _tr_stored_block(s, buf, stored_len, eof)
     deflate_state *s;
     charf *buf;       /* input block */
     ulg stored_len;   /* length of input block */
     int eof;          /* true if this is the last block for a file */
 {
     send_bits(s, (STORED_BLOCK<<1)+eof, 3);  /* send block type */
-    s->compressed_len = (s->compressed_len + 3 + 7) & ~7L;
+#ifdef DEBUG
+    s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L;
     s->compressed_len += (stored_len + 4) << 3;
-
+#endif
     copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
 }
 
@@ -809,12 +889,14 @@ void tr_stored_block(s, buf, stored_len, eof)
  * To simplify the code, we assume the worst case of last real code encoded
  * on one bit only.
  */
-void tr_align(s)
+void _tr_align(s)
     deflate_state *s;
 {
     send_bits(s, STATIC_TREES<<1, 3);
     send_code(s, END_BLOCK, static_ltree);
+#ifdef DEBUG
     s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
+#endif
     bi_flush(s);
     /* Of the 10 bits for the empty block, we have already sent
      * (10 - bi_valid) bits. The lookahead for the last real code (before
@@ -824,7 +906,9 @@ void tr_align(s)
     if (1 + s->last_eob_len + 10 - s->bi_valid < 9) {
         send_bits(s, STATIC_TREES<<1, 3);
         send_code(s, END_BLOCK, static_ltree);
+#ifdef DEBUG
         s->compressed_len += 10L;
+#endif
         bi_flush(s);
     }
     s->last_eob_len = 7;
@@ -832,23 +916,22 @@ void tr_align(s)
 
 /* ===========================================================================
  * Determine the best encoding for the current block: dynamic trees, static
- * trees or store, and output the encoded block to the zip file. This function
+ * trees or store, and output the encoded block to the zip file.
- * returns the total compressed length for the file so far.
  */
-ulg tr_flush_block(s, buf, stored_len, eof)
+void _tr_flush_block(s, buf, stored_len, eof)
     deflate_state *s;
     charf *buf;       /* input block, or NULL if too old */
     ulg stored_len;   /* length of input block */
     int eof;          /* true if this is the last block for a file */
 {
     ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */
-    int max_blindex;  /* index of last bit length code of non zero freq */
+    int max_blindex = 0;  /* index of last bit length code of non zero freq */
 
     /* Build the Huffman trees unless a stored block is forced */
     if (s->level > 0) {
 
 	 /* Check if the file is ascii or binary */
-	if (s->data_type == UNKNOWN) set_data_type(s);
+	if (s->data_type == Z_UNKNOWN) set_data_type(s);
 
 	/* Construct the literal and distance trees */
 	build_tree(s, (tree_desc *)(&(s->l_desc)));
@@ -879,28 +962,9 @@ ulg tr_flush_block(s, buf, stored_len, eof)
 
     } else {
         Assert(buf != (char*)0, "lost buf");
-	opt_lenb = stored_len + 5; /* force a stored block */
+	opt_lenb = static_lenb = stored_len + 5; /* force a stored block */
     }
 
-    /* If compression failed and this is the first and last block,
-     * and if the .zip file can be seeked (to rewrite the local header),
-     * the whole file is transformed into a stored file:
-     */
-#ifdef STORED_FILE_OK
-#  ifdef FORCE_STORED_FILE
-    if (eof && s->compressed_len == 0L) { /* force stored file */
-#  else
-    if (stored_len <= opt_lenb && eof && s->compressed_len==0L && seekable()) {
-#  endif
-        /* Since LIT_BUFSIZE <= 2*WSIZE, the input data must be there: */
-        if (buf == (charf*)0) error ("block vanished");
-
-        copy_block(buf, (unsigned)stored_len, 0); /* without header */
-        s->compressed_len = stored_len << 3;
-        s->method = STORED;
-    } else
-#endif /* STORED_FILE_OK */
-
 #ifdef FORCE_STORED
     if (buf != (char*)0) { /* force stored block */
 #else
@@ -913,7 +977,7 @@ ulg tr_flush_block(s, buf, stored_len, eof)
          * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
          * transform a block into a stored block.
          */
-        tr_stored_block(s, buf, stored_len, eof);
+        _tr_stored_block(s, buf, stored_len, eof);
 
 #ifdef FORCE_STATIC
     } else if (static_lenb >= 0) { /* force static trees */
@@ -922,35 +986,42 @@ ulg tr_flush_block(s, buf, stored_len, eof)
 #endif
         send_bits(s, (STATIC_TREES<<1)+eof, 3);
         compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree);
+#ifdef DEBUG
         s->compressed_len += 3 + s->static_len;
+#endif
     } else {
         send_bits(s, (DYN_TREES<<1)+eof, 3);
         send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1,
                        max_blindex+1);
         compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree);
+#ifdef DEBUG
         s->compressed_len += 3 + s->opt_len;
+#endif
     }
     Assert (s->compressed_len == s->bits_sent, "bad compressed size");
+    /* The above check is made mod 2^32, for files larger than 512 MB
+     * and uLong implemented on 32 bits.
+     */
     init_block(s);
 
     if (eof) {
         bi_windup(s);
+#ifdef DEBUG
         s->compressed_len += 7;  /* align on byte boundary */
+#endif
     }
     Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3,
            s->compressed_len-7*eof));
-
-    return s->compressed_len >> 3;
 }
 
 /* ===========================================================================
  * Save the match info and tally the frequency counts. Return true if
  * the current block must be flushed.
  */
-int tr_tally (s, dist, lc)
+int _tr_tally (s, dist, lc)
     deflate_state *s;
-    int dist;  /* distance of matched string */
+    unsigned dist;  /* distance of matched string */
-    int lc;    /* match length-MIN_MATCH or unmatched char (if dist==0) */
+    unsigned lc;    /* match length-MIN_MATCH or unmatched char (if dist==0) */
 {
     s->d_buf[s->last_lit] = (ush)dist;
     s->l_buf[s->last_lit++] = (uch)lc;
@@ -963,14 +1034,15 @@ int tr_tally (s, dist, lc)
         dist--;             /* dist = match distance - 1 */
         Assert((ush)dist < (ush)MAX_DIST(s) &&
                (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
-               (ush)d_code(dist) < (ush)D_CODES,  "tr_tally: bad match");
+               (ush)d_code(dist) < (ush)D_CODES,  "_tr_tally: bad match");
 
-        s->dyn_ltree[length_code[lc]+LITERALS+1].Freq++;
+        s->dyn_ltree[_length_code[lc]+LITERALS+1].Freq++;
         s->dyn_dtree[d_code(dist)].Freq++;
     }
 
+#ifdef TRUNCATE_BLOCK
     /* Try to guess if it is profitable to stop the current block here */
-    if (s->level > 2 && (s->last_lit & 0xfff) == 0) {
+    if ((s->last_lit & 0x1fff) == 0 && s->level > 2) {
         /* Compute an upper bound for the compressed length */
         ulg out_length = (ulg)s->last_lit*8L;
         ulg in_length = (ulg)((long)s->strstart - s->block_start);
@@ -985,6 +1057,7 @@ int tr_tally (s, dist, lc)
                100L - out_length*100L/in_length));
         if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1;
     }
+#endif
     return (s->last_lit == s->lit_bufsize-1);
     /* We avoid equality with lit_bufsize because of wraparound at 64K
      * on 16 bit machines and because stored blocks are restricted to
@@ -1014,7 +1087,7 @@ local void compress_block(s, ltree, dtree)
             Tracecv(isgraph(lc), (stderr," '%c' ", lc));
         } else {
             /* Here, lc is the match length - MIN_MATCH */
-            code = length_code[lc];
+            code = _length_code[lc];
             send_code(s, code+LITERALS+1, ltree); /* send the length code */
             extra = extra_lbits[code];
             if (extra != 0) {
@@ -1057,7 +1130,7 @@ local void set_data_type(s)
     while (n < 7)        bin_freq += s->dyn_ltree[n++].Freq;
     while (n < 128)    ascii_freq += s->dyn_ltree[n++].Freq;
     while (n < LITERALS) bin_freq += s->dyn_ltree[n++].Freq;
-    s->data_type = (Byte)(bin_freq > (ascii_freq >> 2) ? BINARY : ASCII);
+    s->data_type = (Byte)(bin_freq > (ascii_freq >> 2) ? Z_BINARY : Z_ASCII);
 }
 
 /* ===========================================================================

trees.h

@@ -0,0 +1,128 @@
+/* header created automatically with -DGEN_TREES_H */
+
+local const ct_data static_ltree[L_CODES+2] = {
+{{ 12},{  8}}, {{140},{  8}}, {{ 76},{  8}}, {{204},{  8}}, {{ 44},{  8}},
+{{172},{  8}}, {{108},{  8}}, {{236},{  8}}, {{ 28},{  8}}, {{156},{  8}},
+{{ 92},{  8}}, {{220},{  8}}, {{ 60},{  8}}, {{188},{  8}}, {{124},{  8}},
+{{252},{  8}}, {{  2},{  8}}, {{130},{  8}}, {{ 66},{  8}}, {{194},{  8}},
+{{ 34},{  8}}, {{162},{  8}}, {{ 98},{  8}}, {{226},{  8}}, {{ 18},{  8}},
+{{146},{  8}}, {{ 82},{  8}}, {{210},{  8}}, {{ 50},{  8}}, {{178},{  8}},
+{{114},{  8}}, {{242},{  8}}, {{ 10},{  8}}, {{138},{  8}}, {{ 74},{  8}},
+{{202},{  8}}, {{ 42},{  8}}, {{170},{  8}}, {{106},{  8}}, {{234},{  8}},
+{{ 26},{  8}}, {{154},{  8}}, {{ 90},{  8}}, {{218},{  8}}, {{ 58},{  8}},
+{{186},{  8}}, {{122},{  8}}, {{250},{  8}}, {{  6},{  8}}, {{134},{  8}},
+{{ 70},{  8}}, {{198},{  8}}, {{ 38},{  8}}, {{166},{  8}}, {{102},{  8}},
+{{230},{  8}}, {{ 22},{  8}}, {{150},{  8}}, {{ 86},{  8}}, {{214},{  8}},
+{{ 54},{  8}}, {{182},{  8}}, {{118},{  8}}, {{246},{  8}}, {{ 14},{  8}},
+{{142},{  8}}, {{ 78},{  8}}, {{206},{  8}}, {{ 46},{  8}}, {{174},{  8}},
+{{110},{  8}}, {{238},{  8}}, {{ 30},{  8}}, {{158},{  8}}, {{ 94},{  8}},
+{{222},{  8}}, {{ 62},{  8}}, {{190},{  8}}, {{126},{  8}}, {{254},{  8}},
+{{  1},{  8}}, {{129},{  8}}, {{ 65},{  8}}, {{193},{  8}}, {{ 33},{  8}},
+{{161},{  8}}, {{ 97},{  8}}, {{225},{  8}}, {{ 17},{  8}}, {{145},{  8}},
+{{ 81},{  8}}, {{209},{  8}}, {{ 49},{  8}}, {{177},{  8}}, {{113},{  8}},
+{{241},{  8}}, {{  9},{  8}}, {{137},{  8}}, {{ 73},{  8}}, {{201},{  8}},
+{{ 41},{  8}}, {{169},{  8}}, {{105},{  8}}, {{233},{  8}}, {{ 25},{  8}},
+{{153},{  8}}, {{ 89},{  8}}, {{217},{  8}}, {{ 57},{  8}}, {{185},{  8}},
+{{121},{  8}}, {{249},{  8}}, {{  5},{  8}}, {{133},{  8}}, {{ 69},{  8}},
+{{197},{  8}}, {{ 37},{  8}}, {{165},{  8}}, {{101},{  8}}, {{229},{  8}},
+{{ 21},{  8}}, {{149},{  8}}, {{ 85},{  8}}, {{213},{  8}}, {{ 53},{  8}},
+{{181},{  8}}, {{117},{  8}}, {{245},{  8}}, {{ 13},{  8}}, {{141},{  8}},
+{{ 77},{  8}}, {{205},{  8}}, {{ 45},{  8}}, {{173},{  8}}, {{109},{  8}},
+{{237},{  8}}, {{ 29},{  8}}, {{157},{  8}}, {{ 93},{  8}}, {{221},{  8}},
+{{ 61},{  8}}, {{189},{  8}}, {{125},{  8}}, {{253},{  8}}, {{ 19},{  9}},
+{{275},{  9}}, {{147},{  9}}, {{403},{  9}}, {{ 83},{  9}}, {{339},{  9}},
+{{211},{  9}}, {{467},{  9}}, {{ 51},{  9}}, {{307},{  9}}, {{179},{  9}},
+{{435},{  9}}, {{115},{  9}}, {{371},{  9}}, {{243},{  9}}, {{499},{  9}},
+{{ 11},{  9}}, {{267},{  9}}, {{139},{  9}}, {{395},{  9}}, {{ 75},{  9}},
+{{331},{  9}}, {{203},{  9}}, {{459},{  9}}, {{ 43},{  9}}, {{299},{  9}},
+{{171},{  9}}, {{427},{  9}}, {{107},{  9}}, {{363},{  9}}, {{235},{  9}},
+{{491},{  9}}, {{ 27},{  9}}, {{283},{  9}}, {{155},{  9}}, {{411},{  9}},
+{{ 91},{  9}}, {{347},{  9}}, {{219},{  9}}, {{475},{  9}}, {{ 59},{  9}},
+{{315},{  9}}, {{187},{  9}}, {{443},{  9}}, {{123},{  9}}, {{379},{  9}},
+{{251},{  9}}, {{507},{  9}}, {{  7},{  9}}, {{263},{  9}}, {{135},{  9}},
+{{391},{  9}}, {{ 71},{  9}}, {{327},{  9}}, {{199},{  9}}, {{455},{  9}},
+{{ 39},{  9}}, {{295},{  9}}, {{167},{  9}}, {{423},{  9}}, {{103},{  9}},
+{{359},{  9}}, {{231},{  9}}, {{487},{  9}}, {{ 23},{  9}}, {{279},{  9}},
+{{151},{  9}}, {{407},{  9}}, {{ 87},{  9}}, {{343},{  9}}, {{215},{  9}},
+{{471},{  9}}, {{ 55},{  9}}, {{311},{  9}}, {{183},{  9}}, {{439},{  9}},
+{{119},{  9}}, {{375},{  9}}, {{247},{  9}}, {{503},{  9}}, {{ 15},{  9}},
+{{271},{  9}}, {{143},{  9}}, {{399},{  9}}, {{ 79},{  9}}, {{335},{  9}},
+{{207},{  9}}, {{463},{  9}}, {{ 47},{  9}}, {{303},{  9}}, {{175},{  9}},
+{{431},{  9}}, {{111},{  9}}, {{367},{  9}}, {{239},{  9}}, {{495},{  9}},
+{{ 31},{  9}}, {{287},{  9}}, {{159},{  9}}, {{415},{  9}}, {{ 95},{  9}},
+{{351},{  9}}, {{223},{  9}}, {{479},{  9}}, {{ 63},{  9}}, {{319},{  9}},
+{{191},{  9}}, {{447},{  9}}, {{127},{  9}}, {{383},{  9}}, {{255},{  9}},
+{{511},{  9}}, {{  0},{  7}}, {{ 64},{  7}}, {{ 32},{  7}}, {{ 96},{  7}},
+{{ 16},{  7}}, {{ 80},{  7}}, {{ 48},{  7}}, {{112},{  7}}, {{  8},{  7}},
+{{ 72},{  7}}, {{ 40},{  7}}, {{104},{  7}}, {{ 24},{  7}}, {{ 88},{  7}},
+{{ 56},{  7}}, {{120},{  7}}, {{  4},{  7}}, {{ 68},{  7}}, {{ 36},{  7}},
+{{100},{  7}}, {{ 20},{  7}}, {{ 84},{  7}}, {{ 52},{  7}}, {{116},{  7}},
+{{  3},{  8}}, {{131},{  8}}, {{ 67},{  8}}, {{195},{  8}}, {{ 35},{  8}},
+{{163},{  8}}, {{ 99},{  8}}, {{227},{  8}}
+};
+
+local const ct_data static_dtree[D_CODES] = {
+{{ 0},{ 5}}, {{16},{ 5}}, {{ 8},{ 5}}, {{24},{ 5}}, {{ 4},{ 5}},
+{{20},{ 5}}, {{12},{ 5}}, {{28},{ 5}}, {{ 2},{ 5}}, {{18},{ 5}},
+{{10},{ 5}}, {{26},{ 5}}, {{ 6},{ 5}}, {{22},{ 5}}, {{14},{ 5}},
+{{30},{ 5}}, {{ 1},{ 5}}, {{17},{ 5}}, {{ 9},{ 5}}, {{25},{ 5}},
+{{ 5},{ 5}}, {{21},{ 5}}, {{13},{ 5}}, {{29},{ 5}}, {{ 3},{ 5}},
+{{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}}
+};
+
+const uch _dist_code[DIST_CODE_LEN] = {
+ 0,  1,  2,  3,  4,  4,  5,  5,  6,  6,  6,  6,  7,  7,  7,  7,  8,  8,  8,  8,
+ 8,  8,  8,  8,  9,  9,  9,  9,  9,  9,  9,  9, 10, 10, 10, 10, 10, 10, 10, 10,
+10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
+11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12,
+12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13, 13, 13,
+13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
+13, 13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,  0,  0, 16, 17,
+18, 18, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22,
+23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29
+};
+
+const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {
+ 0,  1,  2,  3,  4,  5,  6,  7,  8,  8,  9,  9, 10, 10, 11, 11, 12, 12, 12, 12,
+13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16,
+17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19,
+19, 19, 19, 19, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,
+21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22, 22,
+22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23,
+23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
+25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 28
+};
+
+local const int base_length[LENGTH_CODES] = {
+0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56,
+64, 80, 96, 112, 128, 160, 192, 224, 0
+};
+
+local const int base_dist[D_CODES] = {
+    0,     1,     2,     3,     4,     6,     8,    12,    16,    24,
+   32,    48,    64,    96,   128,   192,   256,   384,   512,   768,
+ 1024,  1536,  2048,  3072,  4096,  6144,  8192, 12288, 16384, 24576
+};
+

uncompr.c

@@ -1,9 +1,9 @@
 /* uncompr.c -- decompress a memory buffer
- * Copyright (C) 1995 Jean-loup Gailly.
+ * Copyright (C) 1995-1998 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
-/* $Id: uncompr.c,v 1.5 1995/05/03 17:27:12 jloup Exp $ */
+/* @(#) $Id$ */
 
 #include "zlib.h"
 
@@ -22,16 +22,16 @@
    enough memory, Z_BUF_ERROR if there was not enough room in the output
    buffer, or Z_DATA_ERROR if the input data was corrupted.
 */
-int uncompress (dest, destLen, source, sourceLen)
+int ZEXPORT uncompress (dest, destLen, source, sourceLen)
     Bytef *dest;
     uLongf *destLen;
-    Bytef *source;
+    const Bytef *source;
     uLong sourceLen;
 {
     z_stream stream;
     int err;
 
-    stream.next_in = source;
+    stream.next_in = (Bytef*)source;
     stream.avail_in = (uInt)sourceLen;
     /* Check for source > 64K on 16-bit machine: */
     if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
@@ -49,7 +49,7 @@ int uncompress (dest, destLen, source, sourceLen)
     err = inflate(&stream, Z_FINISH);
     if (err != Z_STREAM_END) {
         inflateEnd(&stream);
-        return err;
+        return err == Z_OK ? Z_BUF_ERROR : err;
     }
     *destLen = stream.total_out;
 

zconf.h

@@ -1,25 +1,60 @@
 /* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995 Jean-loup Gailly.
+ * Copyright (C) 1995-1998 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
-/* $Id: zconf.h,v 1.12 1995/05/03 17:27:12 jloup Exp $ */
+/* @(#) $Id$ */
 
 #ifndef _ZCONF_H
 #define _ZCONF_H
 
 /*
-     The library does not install any signal handler. It is recommended to
+ * If you *really* need a unique prefix for all types and library functions,
-  add at least a handler for SIGSEGV when decompressing; the library checks
+ * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
-  the consistency of the input data whenever possible but may go nuts
-  for some forms of corrupted input.
  */
+#ifdef Z_PREFIX
+#  define deflateInit_	z_deflateInit_
+#  define deflate	z_deflate
+#  define deflateEnd	z_deflateEnd
+#  define inflateInit_ 	z_inflateInit_
+#  define inflate	z_inflate
+#  define inflateEnd	z_inflateEnd
+#  define deflateInit2_	z_deflateInit2_
+#  define deflateSetDictionary z_deflateSetDictionary
+#  define deflateCopy	z_deflateCopy
+#  define deflateReset	z_deflateReset
+#  define deflateParams	z_deflateParams
+#  define inflateInit2_	z_inflateInit2_
+#  define inflateSetDictionary z_inflateSetDictionary
+#  define inflateSync	z_inflateSync
+#  define inflateSyncPoint z_inflateSyncPoint
+#  define inflateReset	z_inflateReset
+#  define compress	z_compress
+#  define compress2	z_compress2
+#  define uncompress	z_uncompress
+#  define adler32	z_adler32
+#  define crc32		z_crc32
+#  define get_crc_table z_get_crc_table
+
+#  define Byte		z_Byte
+#  define uInt		z_uInt
+#  define uLong		z_uLong
+#  define Bytef	        z_Bytef
+#  define charf		z_charf
+#  define intf		z_intf
+#  define uIntf		z_uIntf
+#  define uLongf	z_uLongf
+#  define voidpf	z_voidpf
+#  define voidp		z_voidp
+#endif
 
 #if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32)
 #  define WIN32
 #endif
-#if (defined(__GNUC__) || defined(WIN32)) && !defined(__32BIT__)
+#if defined(__GNUC__) || defined(WIN32) || defined(__386__) || defined(i386)
-#  define __32BIT__
+#  ifndef __32BIT__
+#    define __32BIT__
+#  endif
 #endif
 #if defined(__MSDOS__) && !defined(MSDOS)
 #  define MSDOS
@@ -39,18 +74,29 @@
 #if (defined(MSDOS) || defined(_WINDOWS) || defined(WIN32))  && !defined(STDC)
 #  define STDC
 #endif
-#if (defined(__STDC__) || defined(__cplusplus)) && !defined(STDC)
+#if defined(__STDC__) || defined(__cplusplus) || defined(__OS2__)
-#  define STDC
+#  ifndef STDC
+#    define STDC
+#  endif
 #endif
 
-#if !defined(STDC) && !defined(const)
+#ifndef STDC
-#  define const
+#  ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
+#    define const
+#  endif
 #endif
 
-#ifdef	__MWERKS__ /* Metrowerks CodeWarrior declares fileno() in unix.h */
+/* Some Mac compilers merge all .h files incorrectly: */
-#  include <unix.h>
+#if defined(__MWERKS__) || defined(applec) ||defined(THINK_C) ||defined(__SC__)
+#  define NO_DUMMY_DECL
 #endif
 
+/* Old Borland C incorrectly complains about missing returns: */
+#if defined(__BORLANDC__) && (__BORLANDC__ < 0x500)
+#  define NEED_DUMMY_RETURN
+#endif
+
+
 /* Maximum value for memLevel in deflateInit2 */
 #ifndef MAX_MEM_LEVEL
 #  ifdef MAXSEG_64K
@@ -60,13 +106,17 @@
 #  endif
 #endif
 
-/* Maximum value for windowBits in deflateInit2 and inflateInit2 */
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
 #ifndef MAX_WBITS
 #  define MAX_WBITS   15 /* 32K LZ77 window */
 #endif
 
 /* The memory requirements for deflate are (in bytes):
-            1 << (windowBits+2)   +  1 << (memLevel+9)
+            (1 << (windowBits+2)) +  (1 << (memLevel+9))
  that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
  plus a few kilobytes for small objects. For example, if you want to reduce
  the default memory requirements from 256K to 128K, compile with
@@ -94,28 +144,87 @@
  * to define NO_MEMCPY in zutil.h.  If you don't need the mixed model,
  * just define FAR to be empty.
  */
-#if defined(M_I86SM) || defined(M_I86MM) /* MSC small or medium model */
+#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(__32BIT__)
+   /* MSC small or medium model */
+#  define SMALL_MEDIUM
 #  ifdef _MSC_VER
-#    define FAR __far
+#    define FAR _far
 #  else
 #    define FAR far
 #  endif
 #endif
 #if defined(__BORLANDC__) && (defined(__SMALL__) || defined(__MEDIUM__))
-#    define FAR _far /* completely untested, just a best guess */
+#  ifndef __32BIT__
+#    define SMALL_MEDIUM
+#    define FAR _far
+#  endif
 #endif
+
+/* Compile with -DZLIB_DLL for Windows DLL support */
+#if defined(ZLIB_DLL)
+#  if defined(_WINDOWS) || defined(WINDOWS)
+#    ifdef FAR
+#      undef FAR
+#    endif
+#    include <windows.h>
+#    define ZEXPORT  WINAPI
+#    ifdef WIN32
+#      define ZEXPORTVA  WINAPIV
+#    else
+#      define ZEXPORTVA  FAR _cdecl _export
+#    endif
+#  endif
+#  if defined (__BORLANDC__)
+#    if (__BORLANDC__ >= 0x0500) && defined (WIN32)
+#      include <windows.h>
+#      define ZEXPORT __declspec(dllexport) WINAPI
+#      define ZEXPORTRVA __declspec(dllexport) WINAPIV
+#    else
+#      if defined (_Windows) && defined (__DLL__)
+#        define ZEXPORT _export
+#        define ZEXPORTVA _export
+#      endif
+#    endif
+#  endif
+#endif
+
+#if defined (__BEOS__)
+#  if defined (ZLIB_DLL)
+#    define ZEXTERN extern __declspec(dllexport)
+#  else
+#    define ZEXTERN extern __declspec(dllimport)
+#  endif
+#endif
+
+#ifndef ZEXPORT
+#  define ZEXPORT
+#endif
+#ifndef ZEXPORTVA
+#  define ZEXPORTVA
+#endif
+#ifndef ZEXTERN
+#  define ZEXTERN extern
+#endif
+
 #ifndef FAR
 #   define FAR
 #endif
 
+#if !defined(MACOS) && !defined(TARGET_OS_MAC)
 typedef unsigned char  Byte;  /* 8 bits */
+#endif
 typedef unsigned int   uInt;  /* 16 bits or more */
 typedef unsigned long  uLong; /* 32 bits or more */
 
-typedef Byte FAR Bytef;
+#ifdef SMALL_MEDIUM
-typedef char FAR charf;
+   /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
-typedef int FAR intf;
+#  define Bytef Byte FAR
-typedef uInt FAR uIntf;
+#else
+   typedef Byte  FAR Bytef;
+#endif
+typedef char  FAR charf;
+typedef int   FAR intf;
+typedef uInt  FAR uIntf;
 typedef uLong FAR uLongf;
 
 #ifdef STDC
@@ -126,4 +235,45 @@ typedef uLong FAR uLongf;
    typedef Byte     *voidp;
 #endif
 
+#ifdef HAVE_UNISTD_H
+#  include <sys/types.h> /* for off_t */
+#  include <unistd.h>    /* for SEEK_* and off_t */
+#  define z_off_t  off_t
+#endif
+#ifndef SEEK_SET
+#  define SEEK_SET        0       /* Seek from beginning of file.  */
+#  define SEEK_CUR        1       /* Seek from current position.  */
+#  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
+#endif
+#ifndef z_off_t
+#  define  z_off_t long
+#endif
+
+/* MVS linker does not support external names larger than 8 bytes */
+#if defined(__MVS__)
+#   pragma map(deflateInit_,"DEIN")
+#   pragma map(deflateInit2_,"DEIN2")
+#   pragma map(deflateEnd,"DEEND")
+#   pragma map(inflateInit_,"ININ")
+#   pragma map(inflateInit2_,"ININ2")
+#   pragma map(inflateEnd,"INEND")
+#   pragma map(inflateSync,"INSY")
+#   pragma map(inflateSetDictionary,"INSEDI")
+#   pragma map(inflate_blocks,"INBL")
+#   pragma map(inflate_blocks_new,"INBLNE")
+#   pragma map(inflate_blocks_free,"INBLFR")
+#   pragma map(inflate_blocks_reset,"INBLRE")
+#   pragma map(inflate_codes_free,"INCOFR")
+#   pragma map(inflate_codes,"INCO")
+#   pragma map(inflate_fast,"INFA")
+#   pragma map(inflate_flush,"INFLU")
+#   pragma map(inflate_mask,"INMA")
+#   pragma map(inflate_set_dictionary,"INSEDI2")
+#   pragma map(inflate_copyright,"INCOPY")
+#   pragma map(inflate_trees_bits,"INTRBI")
+#   pragma map(inflate_trees_dynamic,"INTRDY")
+#   pragma map(inflate_trees_fixed,"INTRFI")
+#   pragma map(inflate_trees_free,"INTRFR")
+#endif
+
 #endif /* _ZCONF_H */

zlib.3

@@ -0,0 +1,107 @@
+.TH ZLIB 3 "9 July 1998"
+.SH NAME
+zlib \- compression/decompression library
+.SH SYNOPSIS
+[see
+.I zlib.h
+for full description]
+.SH DESCRIPTION
+The
+.I zlib
+library is a general purpose data compression library.
+The code is thread safe.
+It provides in-memory compression and decompression functions,
+including integrity checks of the uncompressed data.
+This version of the library supports only one compression method (deflation)
+but other algorithms will be added later and will have the same stream interface.
+.LP
+Compression can be done in a single step if the buffers are large enough
+(for example if an input file is mmap'ed),
+or can be done by repeated calls of the compression function.
+In the latter case,
+the application must provide more input and/or consume the output
+(providing more output space) before each call.
+.LP
+The library also supports reading and writing files in
+.I gzip
+(.gz) format
+with an interface similar to that of stdio.
+.LP
+The library does not install any signal handler. The decoder checks
+the consistency of the compressed data, so the library should never
+crash even in case of corrupted input.
+.LP
+All functions of the compression library are documented in the file
+.IR zlib.h.
+The distribution source includes examples of use of the library
+the files
+.I example.c
+and
+.IR minigzip.c .
+.LP
+A Java implementation of
+.IR zlib
+is available in the Java Development Kit 1.1
+.IP
+http://www.javasoft.com/products/JDK/1.1/docs/api/Package-java.util.zip.html
+.LP
+A Perl interface to
+.IR zlib ,
+written by Paul Marquess (pmarquess@bfsec.bt.co.uk)
+is available at CPAN (Comprehensive Perl Archive Network) sites,
+such as:
+.IP
+ftp://ftp.cis.ufl.edu/pub/perl/CPAN/modules/by-module/Compress/Compress-Zlib*
+.LP
+A Python interface to
+.IR zlib
+written by A.M. Kuchling <amk@magnet.com>
+is available from the Python Software Association sites, such as:
+.IP
+ftp://ftp.python.org/pub/python/contrib/Encoding/zlib*.tar.gz
+.SH "SEE ALSO"
+Questions about zlib should be sent to:
+.IP
+zlib@quest.jpl.nasa.gov
+or, if this fails, to the author addresses given below.
+The zlib home page is:
+.IP
+http://www.cdrom.com/pub/infozip/zlib/
+.LP
+The data format used by the zlib library is described by RFC
+(Request for Comments) 1950 to 1952 in the files: 
+.IP
+ftp://ds.internic.net/rfc/rfc1950.txt (zlib format)
+.br
+rfc1951.txt (deflate format)
+.br
+rfc1952.txt (gzip format)
+.LP
+These documents are also available in other formats from:
+.IP
+ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
+.SH AUTHORS
+Version 1.1.3
+Copyright (C) 1995-1998 Jean-loup Gailly (jloup@gzip.org)
+and Mark Adler (madler@alumni.caltech.edu).
+.LP
+This software is provided "as-is,"
+without any express or implied warranty.
+In no event will the authors be held liable for any damages
+arising from the use of this software.
+See the distribution directory with respect to requirements
+governing redistribution.
+The deflate format used by
+.I zlib
+was defined by Phil Katz.
+The deflate and
+.I zlib
+specifications were written by L. Peter Deutsch.
+Thanks to all the people who reported problems and suggested various
+improvements in
+.IR zlib ;
+who are too numerous to cite here.
+.LP
+UNIX manual page by R. P. C. Rodgers,
+U.S. National Library of Medicine (rodgers@nlm.nih.gov).
+.\" end of man page