zlib 1.1.4

ChangeLog

@@ -1,7 +1,299 @@
 
 		ChangeLog file for zlib
 
-Changes in 1.0 (15 Jan 96)
+Changes in 1.1.4 (11 March 2002)
+- ZFREE was repeated on same allocation on some error conditions.
+  This creates a security problem described in
+  http://www.zlib.org/advisory-2002-03-11.txt
+- Returned incorrect error (Z_MEM_ERROR) on some invalid data
+- Avoid accesses before window for invalid distances with inflate window
+  less than 32K.
+- force windowBits > 8 to avoid a bug in the encoder for a window size
+  of 256 bytes. (A complete fix will be available in 1.1.5).
+	
+Changes in 1.1.3 (9 July 1998)
+- fix "an inflate input buffer bug that shows up on rare but persistent
+  occasions" (Mark)
+- fix gzread and gztell for concatenated .gz files (Didier Le Botlan)
+- fix gzseek(..., SEEK_SET) in write mode
+- fix crc check after a gzeek (Frank Faubert)
+- fix miniunzip when the last entry in a zip file is itself a zip file
+  (J Lillge)
+- add contrib/asm586 and contrib/asm686 (Brian Raiter)
+  See http://www.muppetlabs.com/~breadbox/software/assembly.html
+- add support for Delphi 3 in contrib/delphi (Bob Dellaca)
+- add support for C++Builder 3 and Delphi 3 in contrib/delphi2 (Davide Moretti)
+- do not exit prematurely in untgz if 0 at start of block (Magnus Holmgren)
+- use macro EXTERN instead of extern to support DLL for BeOS (Sander Stoks)
+- added a FAQ file
+
+- Support gzdopen on Mac with Metrowerks (Jason Linhart)
+- Do not redefine Byte on Mac (Brad Pettit & Jason Linhart)
+- define SEEK_END too if SEEK_SET is not defined (Albert Chin-A-Young)
+- avoid some warnings with Borland C (Tom Tanner)
+- fix a problem in contrib/minizip/zip.c for 16-bit MSDOS (Gilles Vollant)
+- emulate utime() for WIN32 in contrib/untgz  (Gilles Vollant)
+- allow several arguments to configure (Tim Mooney, Frodo Looijaard)
+- use libdir and includedir in Makefile.in (Tim Mooney)
+- support shared libraries on OSF1 V4 (Tim Mooney)
+- remove so_locations in "make clean"  (Tim Mooney)
+- fix maketree.c compilation error (Glenn, Mark)
+- Python interface to zlib now in Python 1.5 (Jeremy Hylton)
+- new Makefile.riscos (Rich Walker)
+- initialize static descriptors in trees.c for embedded targets (Nick Smith)
+- use "foo-gz" in example.c for RISCOS and VMS (Nick Smith)
+- add the OS/2 files in Makefile.in too (Andrew Zabolotny)
+- fix fdopen and halloc macros for Microsoft C 6.0 (Tom Lane)
+- fix maketree.c to allow clean compilation of inffixed.h (Mark)
+- fix parameter check in deflateCopy (Gunther Nikl)
+- cleanup trees.c, use compressed_len only in debug mode (Christian Spieler)
+- Many portability patches by Christian Spieler:
+  . zutil.c, zutil.h: added "const" for zmem*
+  . Make_vms.com: fixed some typos
+  . Make_vms.com: msdos/Makefile.*: removed zutil.h from some dependency lists
+  . msdos/Makefile.msc: remove "default rtl link library" info from obj files
+  . msdos/Makefile.*: use model-dependent name for the built zlib library
+  . msdos/Makefile.emx, nt/Makefile.emx, nt/Makefile.gcc:
+     new makefiles, for emx (DOS/OS2), emx&rsxnt and mingw32 (Windows 9x / NT)
+- use define instead of typedef for Bytef also for MSC small/medium (Tom Lane)
+- replace __far with _far for better portability (Christian Spieler, Tom Lane)
+- fix test for errno.h in configure (Tim Newsham)
+
+Changes in 1.1.2 (19 March 98)
+- added contrib/minzip, mini zip and unzip based on zlib (Gilles Vollant)
+  See http://www.winimage.com/zLibDll/unzip.html
+- preinitialize the inflate tables for fixed codes, to make the code
+  completely thread safe (Mark)
+- some simplifications and slight speed-up to the inflate code (Mark)
+- fix gzeof on non-compressed files (Allan Schrum)
+- add -std1 option in configure for OSF1 to fix gzprintf (Martin Mokrejs)
+- use default value of 4K for Z_BUFSIZE for 16-bit MSDOS (Tim Wegner + Glenn)
+- added os2/Makefile.def and os2/zlib.def (Andrew Zabolotny)
+- add shared lib support for UNIX_SV4.2MP (MATSUURA Takanori)
+- do not wrap extern "C" around system includes (Tom Lane)
+- mention zlib binding for TCL in README (Andreas Kupries)
+- added amiga/Makefile.pup for Amiga powerUP SAS/C PPC (Andreas Kleinert)
+- allow "make install prefix=..." even after configure (Glenn Randers-Pehrson)
+- allow "configure --prefix $HOME" (Tim Mooney)
+- remove warnings in example.c and gzio.c (Glenn Randers-Pehrson)
+- move Makefile.sas to amiga/Makefile.sas
+
+Changes in 1.1.1 (27 Feb 98)
+- fix macros _tr_tally_* in deflate.h for debug mode  (Glenn Randers-Pehrson)
+- remove block truncation heuristic which had very marginal effect for zlib
+  (smaller lit_bufsize than in gzip 1.2.4) and degraded a little the
+  compression ratio on some files. This also allows inlining _tr_tally for
+  matches in deflate_slow.
+- added msdos/Makefile.w32 for WIN32 Microsoft Visual C++ (Bob Frazier)
+
+Changes in 1.1.0 (24 Feb 98)
+- do not return STREAM_END prematurely in inflate (John Bowler)
+- revert to the zlib 1.0.8 inflate to avoid the gcc 2.8.0 bug (Jeremy Buhler)
+- compile with -DFASTEST to get compression code optimized for speed only
+- in minigzip, try mmap'ing the input file first (Miguel Albrecht)
+- increase size of I/O buffers in minigzip.c and gzio.c (not a big gain
+  on Sun but significant on HP)
+
+- add a pointer to experimental unzip library in README (Gilles Vollant)
+- initialize variable gcc in configure (Chris Herborth)
+
+Changes in 1.0.9 (17 Feb 1998)
+- added gzputs and gzgets functions
+- do not clear eof flag in gzseek (Mark Diekhans)
+- fix gzseek for files in transparent mode (Mark Diekhans)
+- do not assume that vsprintf returns the number of bytes written (Jens Krinke)
+- replace EXPORT with ZEXPORT to avoid conflict with other programs
+- added compress2 in zconf.h, zlib.def, zlib.dnt
+- new asm code from Gilles Vollant in contrib/asm386
+- simplify the inflate code (Mark):
+ . Replace ZALLOC's in huft_build() with single ZALLOC in inflate_blocks_new()
+ . ZALLOC the length list in inflate_trees_fixed() instead of using stack
+ . ZALLOC the value area for huft_build() instead of using stack
+ . Simplify Z_FINISH check in inflate()
+
+- Avoid gcc 2.8.0 comparison bug a little differently than zlib 1.0.8
+- in inftrees.c, avoid cc -O bug on HP (Farshid Elahi)
+- in zconf.h move the ZLIB_DLL stuff earlier to avoid problems with
+  the declaration of FAR (Gilles VOllant)
+- install libz.so* with mode 755 (executable) instead of 644 (Marc Lehmann)
+- read_buf buf parameter of type Bytef* instead of charf*
+- zmemcpy parameters are of type Bytef*, not charf* (Joseph Strout)
+- do not redeclare unlink in minigzip.c for WIN32 (John Bowler)
+- fix check for presence of directories in "make install" (Ian Willis)
+
+Changes in 1.0.8 (27 Jan 1998)
+- fixed offsets in contrib/asm386/gvmat32.asm (Gilles Vollant)
+- fix gzgetc and gzputc for big endian systems (Markus Oberhumer)
+- added compress2() to allow setting the compression level
+- include sys/types.h to get off_t on some systems (Marc Lehmann & QingLong)
+- use constant arrays for the static trees in trees.c instead of computing
+  them at run time (thanks to Ken Raeburn for this suggestion). To create
+  trees.h, compile with GEN_TREES_H and run "make test".
+- check return code of example in "make test" and display result
+- pass minigzip command line options to file_compress
+- simplifying code of inflateSync to avoid gcc 2.8 bug
+
+- support CC="gcc -Wall" in configure -s (QingLong)
+- avoid a flush caused by ftell in gzopen for write mode (Ken Raeburn)
+- fix test for shared library support to avoid compiler warnings
+- zlib.lib -> zlib.dll in msdos/zlib.rc (Gilles Vollant)
+- check for TARGET_OS_MAC in addition to MACOS (Brad Pettit)
+- do not use fdopen for Metrowerks on Mac (Brad Pettit))
+- add checks for gzputc and gzputc in example.c
+- avoid warnings in gzio.c and deflate.c (Andreas Kleinert)
+- use const for the CRC table (Ken Raeburn)
+- fixed "make uninstall" for shared libraries
+- use Tracev instead of Trace in infblock.c
+- in example.c use correct compressed length for test_sync
+- suppress +vnocompatwarnings in configure for HPUX (not always supported)
+
+Changes in 1.0.7 (20 Jan 1998)
+- fix gzseek which was broken in write mode
+- return error for gzseek to negative absolute position
+- fix configure for Linux (Chun-Chung Chen)
+- increase stack space for MSC (Tim Wegner)
+- get_crc_table and inflateSyncPoint are EXPORTed (Gilles Vollant)
+- define EXPORTVA for gzprintf (Gilles Vollant)
+- added man page zlib.3 (Rick Rodgers)
+- for contrib/untgz, fix makedir() and improve Makefile
+
+- check gzseek in write mode in example.c
+- allocate extra buffer for seeks only if gzseek is actually called
+- avoid signed/unsigned comparisons (Tim Wegner, Gilles Vollant)
+- add inflateSyncPoint in zconf.h
+- fix list of exported functions in nt/zlib.dnt and mdsos/zlib.def
+
+Changes in 1.0.6 (19 Jan 1998)
+- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
+  gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
+- Fix a deflate bug occuring only with compression level 0 (thanks to
+  Andy Buckler for finding this one).
+- In minigzip, pass transparently also the first byte for .Z files.
+- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()
+- check Z_FINISH in inflate (thanks to Marc Schluper)
+- Implement deflateCopy (thanks to Adam Costello)
+- make static libraries by default in configure, add --shared option.
+- move MSDOS or Windows specific files to directory msdos
+- suppress the notion of partial flush to simplify the interface
+  (but the symbol Z_PARTIAL_FLUSH is kept for compatibility with 1.0.4)
+- suppress history buffer provided by application to simplify the interface
+  (this feature was not implemented anyway in 1.0.4)
+- next_in and avail_in must be initialized before calling inflateInit or
+  inflateInit2
+- add EXPORT in all exported functions (for Windows DLL)
+- added Makefile.nt (thanks to Stephen Williams)
+- added the unsupported "contrib" directory:
+   contrib/asm386/ by Gilles Vollant <info@winimage.com>
+	386 asm code replacing longest_match().
+   contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
+        A C++ I/O streams interface to the zlib gz* functions
+   contrib/iostream2/  by Tyge L<>vset <Tyge.Lovset@cmr.no>
+	Another C++ I/O streams interface
+   contrib/untgz/  by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+	A very simple tar.gz file extractor using zlib
+   contrib/visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
+        How to use compress(), uncompress() and the gz* functions from VB.
+- pass params -f (filtered data), -h (huffman only), -1 to -9 (compression
+  level) in minigzip (thanks to Tom Lane)
+
+- use const for rommable constants in deflate
+- added test for gzseek and gztell in example.c
+- add undocumented function inflateSyncPoint() (hack for Paul Mackerras)
+- add undocumented function zError to convert error code to string
+  (for Tim Smithers)
+- Allow compilation of gzio with -DNO_DEFLATE to avoid the compression code.
+- Use default memcpy for Symantec MSDOS compiler.
+- Add EXPORT keyword for check_func (needed for Windows DLL)
+- add current directory to LD_LIBRARY_PATH for "make test"
+- create also a link for libz.so.1
+- added support for FUJITSU UXP/DS (thanks to Toshiaki Nomura)
+- use $(SHAREDLIB) instead of libz.so in Makefile.in (for HPUX)
+- added -soname for Linux in configure (Chun-Chung Chen,
+- assign numbers to the exported functions in zlib.def (for Windows DLL)
+- add advice in zlib.h for best usage of deflateSetDictionary
+- work around compiler bug on Atari (cast Z_NULL in call of s->checkfn)
+- allow compilation with ANSI keywords only enabled for TurboC in large model
+- avoid "versionString"[0] (Borland bug)
+- add NEED_DUMMY_RETURN for Borland
+- use variable z_verbose for tracing in debug mode (L. Peter Deutsch).
+- allow compilation with CC
+- defined STDC for OS/2 (David Charlap)	
+- limit external names to 8 chars for MVS (Thomas Lund)
+- in minigzip.c, use static buffers only for 16-bit systems
+- fix suffix check for "minigzip -d foo.gz"
+- do not return an error for the 2nd of two consecutive gzflush() (Felix Lee)
+- use _fdopen instead of fdopen for MSC >= 6.0 (Thomas Fanslau)
+- added makelcc.bat for lcc-win32 (Tom St Denis)
+- in Makefile.dj2, use copy and del instead of install and rm (Frank Donahoe)
+- Avoid expanded $Id$. Use "rcs -kb" or "cvs admin -kb" to avoid Id expansion.
+- check for unistd.h in configure (for off_t)
+- remove useless check parameter in inflate_blocks_free
+- avoid useless assignment of s->check to itself in inflate_blocks_new
+- do not flush twice in gzclose (thanks to Ken Raeburn)
+- rename FOPEN as F_OPEN to avoid clash with /usr/include/sys/file.h
+- use NO_ERRNO_H instead of enumeration of operating systems with errno.h
+- work around buggy fclose on pipes for HP/UX
+- support zlib DLL with BORLAND C++ 5.0 (thanks to Glenn Randers-Pehrson)
+- fix configure if CC is already equal to gcc
+
+Changes in 1.0.5 (3 Jan 98)
+- Fix inflate to terminate gracefully when fed corrupted or invalid data
+- Use const for rommable constants in inflate
+- Eliminate memory leaks on error conditions in inflate
+- Removed some vestigial code in inflate
+- Update web address in README
+  
+Changes in 1.0.4 (24 Jul 96)
+- In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF
+  bit, so the decompressor could decompress all the correct data but went
+  on to attempt decompressing extra garbage data. This affected minigzip too.
+- zlibVersion and gzerror return const char* (needed for DLL)
+- port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno)
+- use z_error only for DEBUG (avoid problem with DLLs)
+
+Changes in 1.0.3 (2 Jul 96)
+- use z_streamp instead of z_stream *, which is now a far pointer in MSDOS
+  small and medium models; this makes the library incompatible with previous
+  versions for these models. (No effect in large model or on other systems.)
+- return OK instead of BUF_ERROR if previous deflate call returned with
+  avail_out as zero but there is nothing to do
+- added memcmp for non STDC compilers
+- define NO_DUMMY_DECL for more Mac compilers (.h files merged incorrectly)
+- define __32BIT__ if __386__ or i386 is defined (pb. with Watcom and SCO)
+- better check for 16-bit mode MSC (avoids problem with Symantec)
+
+Changes in 1.0.2 (23 May 96)
+- added Windows DLL support
+- added a function zlibVersion (for the DLL support)
+- fixed declarations using Bytef in infutil.c (pb with MSDOS medium model)
+- Bytef is define's instead of typedef'd only for Borland C
+- avoid reading uninitialized memory in example.c
+- mention in README that the zlib format is now RFC1950
+- updated Makefile.dj2
+- added algorithm.doc
+
+Changes in 1.0.1 (20 May 96) [1.0 skipped to avoid confusion]
+- fix array overlay in deflate.c which sometimes caused bad compressed data
+- fix inflate bug with empty stored block
+- fix MSDOS medium model which was broken in 0.99
+- fix deflateParams() which could generated bad compressed data.
+- Bytef is define'd instead of typedef'ed (work around Borland bug)
+- added an INDEX file
+- new makefiles for DJGPP (Makefile.dj2), 32-bit Borland (Makefile.b32),
+  Watcom (Makefile.wat), Amiga SAS/C (Makefile.sas)
+- speed up adler32 for modern machines without auto-increment
+- added -ansi for IRIX in configure
+- static_init_done in trees.c is an int
+- define unlink as delete for VMS
+- fix configure for QNX
+- add configure branch for SCO and HPUX
+- avoid many warnings (unused variables, dead assignments, etc...)
+- no fdopen for BeOS
+- fix the Watcom fix for 32 bit mode (define FAR as empty)
+- removed redefinition of Byte for MKWERKS
+- work around an MWKERKS bug (incorrect merge of all .h files)
+
+Changes in 0.99 (27 Jan 96)
 - allow preset dictionary shared between compressor and decompressor
 - allow compression level 0 (no compression)
 - add deflateParams in zlib.h: allow dynamic change of compression level

FAQ

@@ -0,0 +1,100 @@
+
+		Frequently Asked Questions about zlib
+
+
+If your question is not there, please check the zlib home page 
+http://www.zlib.org which may have more recent information.
+The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
+
+
+ 1. Is zlib Y2K-compliant?
+
+    Yes. zlib doesn't handle dates.
+
+ 2. Where can I get a Windows DLL version?
+
+    The zlib sources can be compiled without change to produce a DLL. If you
+    want a precompiled DLL, see http://www.winimage.com/zLibDll/ . Questions
+    about the zlib DLL should be sent to Gilles Vollant (info@winimage.com).
+
+ 3. Where can I get a Visual Basic interface to zlib?
+
+    See
+        * http://www.winimage.com/zLibDll/cmp-z-it.zip
+        * http://www.dogma.net/markn/articles/zlibtool/zlibtool.htm
+        * contrib/visual-basic.txt in the zlib distribution
+
+ 4. compress() returns Z_BUF_ERROR
+
+    Make sure that before the call of compress, the length of the compressed
+    buffer is equal to the total size of the compressed buffer and not
+    zero. For Visual Basic, check that this parameter is passed by reference
+    ("as any"), not by value ("as long").
+
+ 5. deflate() or inflate() returns Z_BUF_ERROR
+
+    Before making the call, make sure that avail_in and avail_out are not
+    zero. When setting the parameter flush equal to Z_FINISH, also make sure
+    that avail_out is big enough to allow processing all pending input.
+
+ 6. Where's the zlib documentation (man pages, etc.)?
+
+    It's in zlib.h for the moment, and Francis S. Lin has converted it to a
+    web page zlib.html. Volunteers to transform this to Unix-style man pages,
+    please contact Jean-loup Gailly (jloup@gzip.org). Examples of zlib usage
+    are in the files example.c and minigzip.c.
+
+ 7. Why don't you use GNU autoconf or libtool or ...?
+
+    Because we would like to keep zlib as a very small and simple
+    package. zlib is rather portable and doesn't need much configuration.
+
+ 8. I found a bug in zlib.
+
+    Most of the time, such problems are due to an incorrect usage of
+    zlib. Please try to reproduce the problem with a small program and send
+    the corresponding source to us at zlib@gzip.org . Do not send
+    multi-megabyte data files without prior agreement.
+
+ 9. Why do I get "undefined reference to gzputc"?
+
+    If "make test" produces something like
+
+       example.o(.text+0x154): undefined reference to `gzputc'
+      
+    check that you don't have old files libz.* in /usr/lib, /usr/local/lib or
+    /usr/X11R6/lib. Remove any old versions, then do "make install".
+
+10. I need a Delphi interface to zlib.
+
+    See the directories contrib/delphi and contrib/delphi2 in the zlib
+    distribution.
+
+11. Can zlib handle .zip archives?
+
+    See the directory contrib/minizip in the zlib distribution.
+
+12. Can zlib handle .Z files?
+
+    No, sorry. You have to spawn an uncompress or gunzip subprocess, or adapt
+    the code of uncompress on your own.
+
+13. How can I make a Unix shared library?
+
+    make clean
+    ./configure -s
+    make
+
+14. Why does "make test" fail on Mac OS X?
+
+    Mac OS X already includes zlib as a shared library, and so -lz links the
+    shared library instead of the one that the "make" compiled. For zlib
+    1.1.3, the two are incompatible due to different compile-time
+    options. Simply change the -lz in the Makefile to libz.a, and it will use
+    the compiled library instead of the shared one and the "make test" will
+    succeed.
+
+15. I have a question about OttoPDF
+
+    We are not the authors of OttoPDF. The real author is on the OttoPDF web
+    site Joel Hainley jhainley@myndkryme.com.

INDEX

@@ -0,0 +1,86 @@
+ChangeLog		history of changes
+INDEX			this file
+FAQ			Frequently Asked Questions about zlib
+Make_vms.com		script for Vax/VMS
+Makefile		makefile for Unix (generated by configure)
+Makefile.in		makefile for Unix (template for configure)
+Makefile.riscos 	makefile for RISCOS
+README			guess what
+algorithm.txt		description of the (de)compression algorithm
+configure		configure script for Unix
+descrip.mms		makefile for Vax/VMS
+zlib.3			mini man page for zlib (volunteers to write full
+			man pages from zlib.h welcome. write to jloup@gzip.org)
+
+amiga/Makefile.sas	makefile for Amiga SAS/C
+amiga/Makefile.pup      makefile for Amiga powerUP SAS/C PPC
+
+msdos/Makefile.w32      makefile for Microsoft Visual C++ 32-bit
+msdos/Makefile.b32	makefile for Borland C++   32-bit
+msdos/Makefile.bor	makefile for Borland C/C++ 16-bit
+msdos/Makefile.dj2	makefile for DJGPP 2.x
+msdos/Makefile.emx	makefile for EMX 0.9c (32-bit DOS/OS2)
+msdos/Makefile.msc	makefile for Microsoft C 16-bit
+msdos/Makefile.tc	makefile for Turbo C
+msdos/Makefile.wat	makefile for Watcom C
+msdos/zlib.def        	definition file for Windows DLL
+msdos/zlib.rc         	definition file for Windows DLL
+
+nt/Makefile.nt		makefile for Windows NT
+nt/zlib.dnt		definition file for Windows NT DLL
+nt/Makefile.emx		makefile for EMX 0.9c/RSXNT 1.41 (Win32 Intel)
+nt/Makefile.gcc		makefile for Windows NT using GCC (mingw32)
+
+
+		zlib public header files (must be kept):
+zconf.h
+zlib.h
+
+		private source files used to build the zlib library:
+adler32.c
+compress.c
+crc32.c
+deflate.c
+deflate.h
+gzio.c
+infblock.c
+infblock.h
+infcodes.c
+infcodes.h
+inffast.c
+inffast.h
+inflate.c
+inftrees.c
+inftrees.h
+infutil.c
+infutil.h
+maketree.c
+trees.c
+uncompr.c
+zutil.c
+zutil.h
+
+		source files for sample programs:
+example.c
+minigzip.c
+
+		unsupported contribution by third parties
+
+contrib/asm386/ by Gilles Vollant <info@winimage.com>
+	386 asm code replacing longest_match().
+
+contrib/minizip/ by Gilles Vollant <info@winimage.com>
+	Mini zip and unzip based on zlib
+        See http://www.winimage.com/zLibDll/unzip.html
+
+contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
+        A C++ I/O streams interface to the zlib gz* functions
+
+contrib/iostream2/  by Tyge L<>vset <Tyge.Lovset@cmr.no>
+	Another C++ I/O streams interface
+
+contrib/untgz/  by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+	A very simple tar.gz extractor using zlib
+
+contrib/visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
+        How to use compress(), uncompress() and the gz* functions from VB.

Make_vms.com

@@ -28,15 +28,15 @@ $ if f$search("SYS$SYSTEM:MMS.EXE").eqs.""
 $  then
 $   dele example.obj;*,minigzip.obj;*
 $   CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" -
-                adler32.c zutil.h zlib.h zconf.h
+                adler32.c zlib.h zconf.h
 $   CALL MAKE compress.OBJ "CC ''CCOPT' compress" -
                 compress.c zlib.h zconf.h
 $   CALL MAKE crc32.OBJ "CC ''CCOPT' crc32" -
-                crc32.c zutil.h zlib.h zconf.h
+                crc32.c zlib.h zconf.h
 $   CALL MAKE deflate.OBJ "CC ''CCOPT' deflate" -
-                deflatec.c deflate.h zutil.h zlib.h zconf.h
+                deflate.c deflate.h zutil.h zlib.h zconf.h
 $   CALL MAKE gzio.OBJ "CC ''CCOPT' gzio" -
-                gsio.c zutil.h zlib.h zconf.h
+                gzio.c zutil.h zlib.h zconf.h
 $   CALL MAKE infblock.OBJ "CC ''CCOPT' infblock" -
                 infblock.c zutil.h zlib.h zconf.h infblock.h
 $   CALL MAKE infcodes.OBJ "CC ''CCOPT' infcodes" -

Makefile

@@ -1,10 +1,11 @@
 # Makefile for zlib
-# Copyright (C) 1995-1996 Jean-loup Gailly.
+# Copyright (C) 1995-2002 Jean-loup Gailly.
 # For conditions of distribution and use, see copyright notice in zlib.h 
 
 # To compile and test, type:
 #   ./configure; make test
 # The call of configure is optional if you don't have special requirements
+# If you wish to build zlib as a shared library, use: ./configure -s
 
 # To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
 #    make install
@@ -21,38 +22,69 @@ CFLAGS=-O
 
 LDFLAGS=-L. -lz
 LDSHARED=$(CC)
+CPP=$(CC) -E
 
-VER=1.0
+VER=1.1.4
 LIBS=libz.a
+SHAREDLIB=libz.so
 
 AR=ar rc
 RANLIB=ranlib
 TAR=tar
+SHELL=/bin/sh
 
-prefix=/usr/local
-exec_prefix = $(prefix)
+prefix = /usr/local
+exec_prefix = ${prefix}
+libdir = ${exec_prefix}/lib
+includedir = ${prefix}/include
 
 OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
        zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
 
+OBJA =
+# to use the asm code: make OBJA=match.o
+
 TEST_OBJS = example.o minigzip.o
 
-DISTFILES = README ChangeLog configure Makefile.in Makefile Makefile.msc \
-	    Makefile.bor Makefile.tc Make_vms.com descrip.mms *.[ch]
+DISTFILES = README FAQ INDEX ChangeLog configure Make*[a-z0-9] *.[ch] *.mms \
+  algorithm.txt zlib.3 zlib.html \
+  msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \
+  nt/Make*[a-z0-9] nt/zlib.dnt amiga/Make*.??? os2/M*.os2 os2/zlib.def \
+  contrib/RE*.contrib contrib/*.txt contrib/asm386/*.asm contrib/asm386/*.c \
+  contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/asm[56]86/*.?86 \
+  contrib/asm[56]86/*.S contrib/iostream/*.cpp \
+  contrib/iostream/*.h  contrib/iostream2/*.h contrib/iostream2/*.cpp \
+  contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32 \
+  contrib/minizip/[CM]*[pe] contrib/minizip/*.[ch] contrib/minizip/*.[td]?? \
+  contrib/delphi*/*.???
 
 all: example minigzip
 
 test: all
-	./example
-	echo hello world | ./minigzip | ./minigzip -d 
+	@LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
+	echo hello world | ./minigzip | ./minigzip -d || \
+	  echo '		*** minigzip test FAILED ***' ; \
+	if ./example; then \
+	  echo '		*** zlib test OK ***'; \
+	else \
+	  echo '		*** zlib test FAILED ***'; \
+	fi
 
-libz.a: $(OBJS)
-	$(AR) $@ $(OBJS)
-	-@ ($(RANLIB) $@ || true) 2>/dev/null
+libz.a: $(OBJS) $(OBJA)
+	$(AR) $@ $(OBJS) $(OBJA)
+	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
 
-libz.so.$(VER): $(OBJS)
+match.o: match.S
+	$(CPP) match.S > _match.s
+	$(CC) -c _match.s
+	mv _match.o match.o
+	rm -f _match.s
+
+$(SHAREDLIB).$(VER): $(OBJS)
 	$(LDSHARED) -o $@ $(OBJS)
-	rm -f libz.so; ln -s $@ libz.so
+	rm -f $(SHAREDLIB) $(SHAREDLIB).1
+	ln -s $@ $(SHAREDLIB)
+	ln -s $@ $(SHAREDLIB).1
 
 example: example.o $(LIBS)
 	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
@@ -61,37 +93,50 @@ minigzip: minigzip.o $(LIBS)
 	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
 
 install: $(LIBS)
-	-@if [ ! $(prefix)/include  ]; then mkdir $(prefix)/include; fi
-	-@if [ ! $(exec_prefix)/lib ]; then mkdir $(exec_prefix)/lib; fi
-	cp zlib.h zconf.h $(prefix)/include
-	chmod 644 $(prefix)/include/zlib.h $(prefix)/include/zconf.h
-	cp $(LIBS) $(exec_prefix)/lib
-	cd $(exec_prefix)/lib; chmod 644 $(LIBS)
-	-@(cd $(exec_prefix)/lib; $(RANLIB) libz.a || true) >/dev/null 2>&1
-	cd $(exec_prefix)/lib; if test -f libz.so.$(VER); then \
-	  ln -s libz.so.$(VER) libz.so; \
+	-@if [ ! -d $(includedir)  ]; then mkdir $(includedir); fi
+	-@if [ ! -d $(libdir) ]; then mkdir $(libdir); fi
+	cp zlib.h zconf.h $(includedir)
+	chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h
+	cp $(LIBS) $(libdir)
+	cd $(libdir); chmod 755 $(LIBS)
+	-@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
+	cd $(libdir); if test -f $(SHAREDLIB).$(VER); then \
+	  rm -f $(SHAREDLIB) $(SHAREDLIB).1; \
+	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB); \
+	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB).1; \
+	  (ldconfig || true)  >/dev/null 2>&1; \
 	fi
 # The ranlib in install is needed on NeXTSTEP which checks file times
+# ldconfig is for Linux
 
 uninstall:
-	cd $(exec_prefix)/lib; rm -f $(LIBS); \
-	if test -f libz.so; then \
-	 v=`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p'<$(prefix)/include/zlib.h`;\
-	 rm -f libz.so.$$v libz.so; \
+	cd $(includedir); \
+	v=$(VER); \
+	if test -f zlib.h; then \
+	  v=`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`; \
+          rm -f zlib.h zconf.h; \
+	fi; \
+	cd $(libdir); rm -f libz.a; \
+	if test -f $(SHAREDLIB).$$v; then \
+	  rm -f $(SHAREDLIB).$$v $(SHAREDLIB) $(SHAREDLIB).1; \
 	fi
-	cd $(prefix)/include; rm -f zlib.h zconf.h
 
 clean:
-	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz
+	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz so_locations \
+	   _match.s maketree
+
+distclean:	clean
 
 zip:
 	mv Makefile Makefile~; cp -p Makefile.in Makefile
-	v=`sed -n -e 's/\./-/' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
-	zip -ul9 zlib-$$v $(DISTFILES)
+	rm -f test.c ztest*.c contrib/minizip/test.zip
+	v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
+	zip -ul9 zlib$$v $(DISTFILES)
 	mv Makefile~ Makefile
 
 dist:
 	mv Makefile Makefile~; cp -p Makefile.in Makefile
+	rm -f test.c ztest*.c contrib/minizip/test.zip
 	d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
 	rm -f $$d.tar.gz; \
 	if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \
@@ -125,6 +170,6 @@ inflate.o: zutil.h zlib.h zconf.h infblock.h
 inftrees.o: zutil.h zlib.h zconf.h inftrees.h
 infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
 minigzip.o:  zlib.h zconf.h 
-trees.o: deflate.h zutil.h zlib.h zconf.h 
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
 uncompr.o: zlib.h zconf.h
 zutil.o: zutil.h zlib.h zconf.h  

Makefile.in

@@ -1,10 +1,11 @@
 # Makefile for zlib
-# Copyright (C) 1995-1996 Jean-loup Gailly.
+# Copyright (C) 1995-2002 Jean-loup Gailly.
 # For conditions of distribution and use, see copyright notice in zlib.h 
 
 # To compile and test, type:
 #   ./configure; make test
 # The call of configure is optional if you don't have special requirements
+# If you wish to build zlib as a shared library, use: ./configure -s
 
 # To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
 #    make install
@@ -21,38 +22,69 @@ CFLAGS=-O
 
 LDFLAGS=-L. -lz
 LDSHARED=$(CC)
+CPP=$(CC) -E
 
-VER=1.0
+VER=1.1.4
 LIBS=libz.a
+SHAREDLIB=libz.so
 
 AR=ar rc
 RANLIB=ranlib
 TAR=tar
+SHELL=/bin/sh
 
-prefix=/usr/local
-exec_prefix = $(prefix)
+prefix = /usr/local
+exec_prefix = ${prefix}
+libdir = ${exec_prefix}/lib
+includedir = ${prefix}/include
 
 OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
        zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
 
+OBJA =
+# to use the asm code: make OBJA=match.o
+
 TEST_OBJS = example.o minigzip.o
 
-DISTFILES = README ChangeLog configure Makefile.in Makefile Makefile.msc \
-	    Makefile.bor Makefile.tc Make_vms.com descrip.mms *.[ch]
+DISTFILES = README FAQ INDEX ChangeLog configure Make*[a-z0-9] *.[ch] *.mms \
+  algorithm.txt zlib.3 zlib.html \
+  msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \
+  nt/Make*[a-z0-9] nt/zlib.dnt amiga/Make*.??? os2/M*.os2 os2/zlib.def \
+  contrib/RE*.contrib contrib/*.txt contrib/asm386/*.asm contrib/asm386/*.c \
+  contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/asm[56]86/*.?86 \
+  contrib/asm[56]86/*.S contrib/iostream/*.cpp \
+  contrib/iostream/*.h  contrib/iostream2/*.h contrib/iostream2/*.cpp \
+  contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32 \
+  contrib/minizip/[CM]*[pe] contrib/minizip/*.[ch] contrib/minizip/*.[td]?? \
+  contrib/delphi*/*.???
 
 all: example minigzip
 
 test: all
-	./example
-	echo hello world | ./minigzip | ./minigzip -d 
+	@LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
+	echo hello world | ./minigzip | ./minigzip -d || \
+	  echo '		*** minigzip test FAILED ***' ; \
+	if ./example; then \
+	  echo '		*** zlib test OK ***'; \
+	else \
+	  echo '		*** zlib test FAILED ***'; \
+	fi
 
-libz.a: $(OBJS)
-	$(AR) $@ $(OBJS)
-	-@ ($(RANLIB) $@ || true) 2>/dev/null
+libz.a: $(OBJS) $(OBJA)
+	$(AR) $@ $(OBJS) $(OBJA)
+	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
 
-libz.so.$(VER): $(OBJS)
+match.o: match.S
+	$(CPP) match.S > _match.s
+	$(CC) -c _match.s
+	mv _match.o match.o
+	rm -f _match.s
+
+$(SHAREDLIB).$(VER): $(OBJS)
 	$(LDSHARED) -o $@ $(OBJS)
-	rm -f libz.so; ln -s $@ libz.so
+	rm -f $(SHAREDLIB) $(SHAREDLIB).1
+	ln -s $@ $(SHAREDLIB)
+	ln -s $@ $(SHAREDLIB).1
 
 example: example.o $(LIBS)
 	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
@@ -61,37 +93,50 @@ minigzip: minigzip.o $(LIBS)
 	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
 
 install: $(LIBS)
-	-@if [ ! $(prefix)/include  ]; then mkdir $(prefix)/include; fi
-	-@if [ ! $(exec_prefix)/lib ]; then mkdir $(exec_prefix)/lib; fi
-	cp zlib.h zconf.h $(prefix)/include
-	chmod 644 $(prefix)/include/zlib.h $(prefix)/include/zconf.h
-	cp $(LIBS) $(exec_prefix)/lib
-	cd $(exec_prefix)/lib; chmod 644 $(LIBS)
-	-@(cd $(exec_prefix)/lib; $(RANLIB) libz.a || true) >/dev/null 2>&1
-	cd $(exec_prefix)/lib; if test -f libz.so.$(VER); then \
-	  ln -s libz.so.$(VER) libz.so; \
+	-@if [ ! -d $(includedir)  ]; then mkdir $(includedir); fi
+	-@if [ ! -d $(libdir) ]; then mkdir $(libdir); fi
+	cp zlib.h zconf.h $(includedir)
+	chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h
+	cp $(LIBS) $(libdir)
+	cd $(libdir); chmod 755 $(LIBS)
+	-@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
+	cd $(libdir); if test -f $(SHAREDLIB).$(VER); then \
+	  rm -f $(SHAREDLIB) $(SHAREDLIB).1; \
+	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB); \
+	  ln -s $(SHAREDLIB).$(VER) $(SHAREDLIB).1; \
+	  (ldconfig || true)  >/dev/null 2>&1; \
 	fi
 # The ranlib in install is needed on NeXTSTEP which checks file times
+# ldconfig is for Linux
 
 uninstall:
-	cd $(exec_prefix)/lib; rm -f $(LIBS); \
-	if test -f libz.so; then \
-	 v=`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p'<$(prefix)/include/zlib.h`;\
-	 rm -f libz.so.$$v libz.so; \
+	cd $(includedir); \
+	v=$(VER); \
+	if test -f zlib.h; then \
+	  v=`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`; \
+          rm -f zlib.h zconf.h; \
+	fi; \
+	cd $(libdir); rm -f libz.a; \
+	if test -f $(SHAREDLIB).$$v; then \
+	  rm -f $(SHAREDLIB).$$v $(SHAREDLIB) $(SHAREDLIB).1; \
 	fi
-	cd $(prefix)/include; rm -f zlib.h zconf.h
 
 clean:
-	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz
+	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz so_locations \
+	   _match.s maketree
+
+distclean:	clean
 
 zip:
 	mv Makefile Makefile~; cp -p Makefile.in Makefile
-	v=`sed -n -e 's/\./-/' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
-	zip -ul9 zlib-$$v $(DISTFILES)
+	rm -f test.c ztest*.c contrib/minizip/test.zip
+	v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
+	zip -ul9 zlib$$v $(DISTFILES)
 	mv Makefile~ Makefile
 
 dist:
 	mv Makefile Makefile~; cp -p Makefile.in Makefile
+	rm -f test.c ztest*.c contrib/minizip/test.zip
 	d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
 	rm -f $$d.tar.gz; \
 	if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \
@@ -125,6 +170,6 @@ inflate.o: zutil.h zlib.h zconf.h infblock.h
 inftrees.o: zutil.h zlib.h zconf.h inftrees.h
 infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
 minigzip.o:  zlib.h zconf.h 
-trees.o: deflate.h zutil.h zlib.h zconf.h 
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
 uncompr.o: zlib.h zconf.h
 zutil.o: zutil.h zlib.h zconf.h  

Makefile.riscos

@@ -0,0 +1,151 @@
+# Project:   zlib_1_03
+# Patched for zlib 1.1.2 rw@shadow.org.uk 19980430
+# test works out-of-the-box, installs `somewhere' on demand
+
+# Toolflags:
+CCflags = -c -depend !Depend -IC: -g -throwback  -DRISCOS  -fah 
+C++flags = -c -depend !Depend -IC: -throwback
+Linkflags = -aif -c++ -o $@ 
+ObjAsmflags = -throwback -NoCache -depend !Depend
+CMHGflags = 
+LibFileflags = -c -l -o $@ 
+Squeezeflags = -o $@
+
+# change the line below to where _you_ want the library installed.
+libdest = lib:zlib
+
+# Final targets:
+@.lib:   @.o.adler32 @.o.compress @.o.crc32 @.o.deflate @.o.gzio \
+        @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil @.o.trees \
+        @.o.uncompr @.o.zutil 
+        LibFile $(LibFileflags) @.o.adler32 @.o.compress @.o.crc32 @.o.deflate \
+        @.o.gzio @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil \
+        @.o.trees @.o.uncompr @.o.zutil 
+test:   @.minigzip @.example @.lib
+	@copy @.lib @.libc  A~C~DF~L~N~P~Q~RS~TV
+	@echo running tests: hang on.
+	@/@.minigzip -f -9 libc
+	@/@.minigzip -d libc-gz
+	@/@.minigzip -f -1 libc
+	@/@.minigzip -d libc-gz
+	@/@.minigzip -h -9 libc
+	@/@.minigzip -d libc-gz
+	@/@.minigzip -h -1 libc
+	@/@.minigzip -d libc-gz
+	@/@.minigzip -9 libc
+	@/@.minigzip -d libc-gz
+	@/@.minigzip -1 libc
+	@/@.minigzip -d libc-gz
+	@diff @.lib @.libc
+	@echo that should have reported '@.lib and @.libc identical' if you have diff.
+	@/@.example @.fred @.fred
+	@echo that will have given lots of hello!'s.
+
+@.minigzip:   @.o.minigzip @.lib C:o.Stubs 
+        Link $(Linkflags) @.o.minigzip @.lib C:o.Stubs 
+@.example:   @.o.example @.lib C:o.Stubs 
+        Link $(Linkflags) @.o.example @.lib C:o.Stubs
+
+install: @.lib
+	cdir $(libdest)
+	cdir $(libdest).h
+	@copy @.h.zlib $(libdest).h.zlib A~C~DF~L~N~P~Q~RS~TV
+	@copy @.h.zconf $(libdest).h.zconf A~C~DF~L~N~P~Q~RS~TV
+	@copy @.lib $(libdest).lib  A~C~DF~L~N~P~Q~RS~TV
+	@echo okay, installed zlib in $(libdest)
+
+clean:; remove @.minigzip
+	remove @.example
+	remove @.libc
+	-wipe @.o.* F~r~cV
+	remove @.fred
+
+# User-editable dependencies:
+.c.o:
+        cc $(ccflags) -o $@ $<
+
+# Static dependencies:
+
+# Dynamic dependencies:
+o.example:	c.example
+o.example:	h.zlib
+o.example:	h.zconf
+o.minigzip:	c.minigzip
+o.minigzip:	h.zlib
+o.minigzip:	h.zconf
+o.adler32:	c.adler32
+o.adler32:	h.zlib
+o.adler32:	h.zconf
+o.compress:	c.compress
+o.compress:	h.zlib
+o.compress:	h.zconf
+o.crc32:	c.crc32
+o.crc32:	h.zlib
+o.crc32:	h.zconf
+o.deflate:	c.deflate
+o.deflate:	h.deflate
+o.deflate:	h.zutil
+o.deflate:	h.zlib
+o.deflate:	h.zconf
+o.gzio:	c.gzio
+o.gzio:	h.zutil
+o.gzio:	h.zlib
+o.gzio:	h.zconf
+o.infblock:	c.infblock
+o.infblock:	h.zutil
+o.infblock:	h.zlib
+o.infblock:	h.zconf
+o.infblock:	h.infblock
+o.infblock:	h.inftrees
+o.infblock:	h.infcodes
+o.infblock:	h.infutil
+o.infcodes:	c.infcodes
+o.infcodes:	h.zutil
+o.infcodes:	h.zlib
+o.infcodes:	h.zconf
+o.infcodes:	h.inftrees
+o.infcodes:	h.infblock
+o.infcodes:	h.infcodes
+o.infcodes:	h.infutil
+o.infcodes:	h.inffast
+o.inffast:	c.inffast
+o.inffast:	h.zutil
+o.inffast:	h.zlib
+o.inffast:	h.zconf
+o.inffast:	h.inftrees
+o.inffast:	h.infblock
+o.inffast:	h.infcodes
+o.inffast:	h.infutil
+o.inffast:	h.inffast
+o.inflate:	c.inflate
+o.inflate:	h.zutil
+o.inflate:	h.zlib
+o.inflate:	h.zconf
+o.inflate:	h.infblock
+o.inftrees:	c.inftrees
+o.inftrees:	h.zutil
+o.inftrees:	h.zlib
+o.inftrees:	h.zconf
+o.inftrees:	h.inftrees
+o.inftrees:	h.inffixed
+o.infutil:	c.infutil
+o.infutil:	h.zutil
+o.infutil:	h.zlib
+o.infutil:	h.zconf
+o.infutil:	h.infblock
+o.infutil:	h.inftrees
+o.infutil:	h.infcodes
+o.infutil:	h.infutil
+o.trees:	c.trees
+o.trees:	h.deflate
+o.trees:	h.zutil
+o.trees:	h.zlib
+o.trees:	h.zconf
+o.trees:	h.trees
+o.uncompr:	c.uncompr
+o.uncompr:	h.zlib
+o.uncompr:	h.zconf
+o.zutil:	c.zutil
+o.zutil:	h.zutil
+o.zutil:	h.zlib
+o.zutil:	h.zconf

README

@@ -1,75 +1,122 @@
-zlib 1.0 is a general purpose data compression library.  All the code
-is reentrant (thread safe).  The data format used by the zlib library
-is described in the files zlib-3.3.doc, deflate-1.3.doc and
-gzip-4.3.doc, available in ftp://ftp.uu.net/pub/archiving/zip/doc/
+zlib 1.1.4 is a general purpose data compression library.  All the code
+is thread safe.  The data format used by the zlib library
+is described by RFCs (Request for Comments) 1950 to 1952 in the files 
+http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate
+format) and rfc1952.txt (gzip format). These documents are also available in
+other formats from ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
 
-All functions of the compression library are documented in the file
-zlib.h. A usage example of the library is given in the file example.c
-which also tests that the library is working correctly. Another
-example is given in the file minigzip.c. The compression library itself
-is composed of all source files except example.c and minigzip.c.
+All functions of the compression library are documented in the file zlib.h
+(volunteer to write man pages welcome, contact jloup@gzip.org). A usage
+example of the library is given in the file example.c which also tests that
+the library is working correctly. Another example is given in the file
+minigzip.c. The compression library itself is composed of all source files
+except example.c and minigzip.c.
 
 To compile all files and run the test program, follow the instructions
 given at the top of Makefile. In short "make test; make install"
-should work for most machines.  For MSDOS, use one of the special
-makefiles such as Makefile.msc; for VMS, use Make_vms.com or descrip.mms.
+should work for most machines. For Unix: "./configure; make test; make install"
+For MSDOS, use one of the special makefiles such as Makefile.msc.
+For VMS, use Make_vms.com or descrip.mms.
 
-Questions about zlib should be sent to <zlib@quest.jpl.nasa.gov> or,
-if this fails, to the addresses given below in the Copyright section.
+Questions about zlib should be sent to <zlib@gzip.org>, or to
+Gilles Vollant <info@winimage.com> for the Windows DLL version.
+The zlib home page is http://www.zlib.org or http://www.gzip.org/zlib/
+Before reporting a problem, please check this site to verify that
+you have the latest version of zlib; otherwise get the latest version and
+check whether the problem still exists or not.
+
+PLEASE read the zlib FAQ http://www.gzip.org/zlib/zlib_faq.html
+before asking for help.
+
+Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan. 1997
+issue of  Dr. Dobb's Journal; a copy of the article is available in
+http://dogma.net/markn/articles/zlibtool/zlibtool.htm
+
+The changes made in version 1.1.4 are documented in the file ChangeLog.
+The only changes made since 1.1.3 are bug corrections:
+
+- ZFREE was repeated on same allocation on some error conditions.
+  This creates a security problem described in
+  http://www.zlib.org/advisory-2002-03-11.txt
+- Returned incorrect error (Z_MEM_ERROR) on some invalid data
+- Avoid accesses before window for invalid distances with inflate window
+  less than 32K.
+- force windowBits > 8 to avoid a bug in the encoder for a window size
+  of 256 bytes. (A complete fix will be available in 1.1.5).
+
+The beta version 1.1.5beta includes many more changes. A new official
+version 1.1.5 will be released as soon as extensive testing has been
+completed on it.
+
+
+Unsupported third party contributions are provided in directory "contrib".
+
+A Java implementation of zlib is available in the Java Development Kit
+http://www.javasoft.com/products/JDK/1.1/docs/api/Package-java.util.zip.html
+See the zlib home page http://www.zlib.org for details.
+
+A Perl interface to zlib written by Paul Marquess <pmarquess@bfsec.bt.co.uk>
+is in the CPAN (Comprehensive Perl Archive Network) sites
+http://www.cpan.org/modules/by-module/Compress/
+
+A Python interface to zlib written by A.M. Kuchling <amk@magnet.com>
+is available in Python 1.5 and later versions, see
+http://www.python.org/doc/lib/module-zlib.html
+
+A zlib binding for TCL written by Andreas Kupries <a.kupries@westend.com>
+is availlable at http://www.westend.com/~kupries/doc/trf/man/man.html
+
+An experimental package to read and write files in .zip format,
+written on top of zlib by Gilles Vollant <info@winimage.com>, is
+available at http://www.winimage.com/zLibDll/unzip.html
+and also in the contrib/minizip directory of zlib.
 
-The changes made in version 1.0 are documented in the file ChangeLog.
-The main changes since 0.95 are:
-- allow preset dictionary shared between compressor and decompressor
-- allow compression level 0 (no compression)
-- add deflateParams in zlib.h: allow dynamic change of compression level
-  and compression strategy.
-- test large buffers and deflateParams in example.c
-- add optional "configure" to build zlib as a shared library
-- suppress Makefile.qnx, use configure instead
-- fixes for 64-bit systems (needed for Alpha and Cray)
-- declare Z_DEFLATED in zlib.h (possible parameter for deflateInit2)
-- always return Z_BUF_ERROR when deflate() has nothing to do
-- deflateInit and inflateInit are now macros to allow version checking
-- prefix all global functions and types with z_ with -DZ_PREFIX
-- fix some very unlikely race conditions in multi-threaded environment
-- several minor fixes for better portability
-- free in reverse order of allocation to help memory manager
-- use zlib-1.0/* instead of zlib/* inside the tar.gz
-- make zlib warning-free with "gcc -O3 -Wall -Wwrite-strings -Wpointer-arith
-  -Wconversion -Wstrict-prototypes -Wmissing-prototypes"
-- allow gzread on concatenated .gz files
-- deflateEnd now returns Z_DATA_ERROR if it was premature
-- deflate is finally (?) fully deterministic
 
 Notes for some targets:
 
-- For Turbo C the small model is supported only with reduced performance to
-  avoid any far allocation; it was tested with -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
+- To build a Windows DLL version, include in a DLL project zlib.def, zlib.rc
+  and all .c files except example.c and minigzip.c; compile with -DZLIB_DLL
+  The zlib DLL support was initially done by Alessandro Iacopetti and is
+  now maintained by Gilles Vollant <info@winimage.com>. Check the zlib DLL
+  home page at http://www.winimage.com/zLibDll
 
-- For 64-bit Iris, deflate.c must be compiled without any optimization.
-  With -O, one libpng test fails. The test works in 32 bit mode (with the
-  -32 compiler flag).
+  From Visual Basic, you can call the DLL functions which do not take
+  a structure as argument: compress, uncompress and all gz* functions.
+  See contrib/visual-basic.txt for more information, or get
+  http://www.tcfb.com/dowseware/cmp-z-it.zip
+
+- For 64-bit Irix, deflate.c must be compiled without any optimization.
+  With -O, one libpng test fails. The test works in 32 bit mode (with
+  the -n32 compiler flag). The compiler bug has been reported to SGI.
 
 - zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1   
   it works when compiled with cc.
 
-- zlib doesn't work on HP-UX 9.05 with one cc compiler (the one not
-  accepting the -O option). It works with the other cc compiler.
+- on Digital Unix 4.0D (formely OSF/1) on AlphaServer, the cc option -std1
+  is necessary to get gzprintf working correctly. This is done by configure.
+
+- zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works
+  with other compilers. Use "make test" to check your compiler.
+
+- gzdopen is not supported on RISCOS, BEOS and by some Mac compilers.
+
+- For Turbo C the small model is supported only with reduced performance to
+  avoid any far allocation; it was tested with -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
+
+- For PalmOs, see http://www.cs.uit.no/~perm/PASTA/pilot/software.html
+  Per Harald Myrvang <perm@stud.cs.uit.no>
 
-A Perl interface to zlib written by Paul Marquess <pmarquess@bfsec.bt.co.uk>
-is in the CPAN (Comprehensive Perl Archive Network) sites, such as:
-ftp://ftp.cis.ufl.edu/pub/perl/CPAN/modules/by-module/Compress/Compress-Zlib*
 
 Acknowledgments:
 
   The deflate format used by zlib was defined by Phil Katz. The deflate
-  and zlib specifications were written by Peter Deutsch. Thanks to all the
+  and zlib specifications were written by L. Peter Deutsch. Thanks to all the
   people who reported problems and suggested various improvements in zlib;
   they are too numerous to cite here.
 
 Copyright notice:
 
- (C) 1995-1996 Jean-loup Gailly and Mark Adler
+ (C) 1995-2002 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
@@ -88,7 +135,7 @@ Copyright notice:
   3. This notice may not be removed or altered from any source distribution.
 
   Jean-loup Gailly        Mark Adler
-  gzip@prep.ai.mit.edu    madler@alumni.caltech.edu
+  jloup@gzip.org          madler@alumni.caltech.edu
 
 If you use the zlib library in a product, we would appreciate *not*
 receiving lengthy legal documents to sign. The sources are provided

adler32.c

@@ -1,9 +1,9 @@
 /* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-1996 Mark Adler
+ * Copyright (C) 1995-2002 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
-/* $Id: adler32.c,v 1.6 1995/05/03 17:27:08 jloup Exp $ */
+/* @(#) $Id$ */
 
 #include "zlib.h"
 
@@ -11,14 +11,14 @@
 #define NMAX 5552
 /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
 
-#define DO1(buf)  {s1 += *buf++; s2 += s1;}
-#define DO2(buf)  DO1(buf); DO1(buf);
-#define DO4(buf)  DO2(buf); DO2(buf);
-#define DO8(buf)  DO4(buf); DO4(buf);
-#define DO16(buf) DO8(buf); DO8(buf);
+#define DO1(buf,i)  {s1 += buf[i]; s2 += s1;}
+#define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
+#define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
+#define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
+#define DO16(buf)   DO8(buf,0); DO8(buf,8);
 
 /* ========================================================================= */
-uLong adler32(adler, buf, len)
+uLong ZEXPORT adler32(adler, buf, len)
     uLong adler;
     const Bytef *buf;
     uInt len;
@@ -34,10 +34,12 @@ uLong adler32(adler, buf, len)
         len -= k;
         while (k >= 16) {
             DO16(buf);
+	    buf += 16;
             k -= 16;
         }
         if (k != 0) do {
-            DO1(buf);
+            s1 += *buf++;
+	    s2 += s1;
         } while (--k);
         s1 %= BASE;
         s2 %= BASE;

algorithm.txt

@@ -0,0 +1,213 @@
+1. Compression algorithm (deflate)
+
+The deflation algorithm used by gzip (also zip and zlib) is a variation of
+LZ77 (Lempel-Ziv 1977, see reference below). It finds duplicated strings in
+the input data.  The second occurrence of a string is replaced by a
+pointer to the previous string, in the form of a pair (distance,
+length).  Distances are limited to 32K bytes, and lengths are limited
+to 258 bytes. When a string does not occur anywhere in the previous
+32K bytes, it is emitted as a sequence of literal bytes.  (In this
+description, `string' must be taken as an arbitrary sequence of bytes,
+and is not restricted to printable characters.)
+
+Literals or match lengths are compressed with one Huffman tree, and
+match distances are compressed with another tree. The trees are stored
+in a compact form at the start of each block. The blocks can have any
+size (except that the compressed data for one block must fit in
+available memory). A block is terminated when deflate() determines that
+it would be useful to start another block with fresh trees. (This is
+somewhat similar to the behavior of LZW-based _compress_.)
+
+Duplicated strings are found using a hash table. All input strings of
+length 3 are inserted in the hash table. A hash index is computed for
+the next 3 bytes. If the hash chain for this index is not empty, all
+strings in the chain are compared with the current input string, and
+the longest match is selected.
+
+The hash chains are searched starting with the most recent strings, to
+favor small distances and thus take advantage of the Huffman encoding.
+The hash chains are singly linked. There are no deletions from the
+hash chains, the algorithm simply discards matches that are too old.
+
+To avoid a worst-case situation, very long hash chains are arbitrarily
+truncated at a certain length, determined by a runtime option (level
+parameter of deflateInit). So deflate() does not always find the longest
+possible match but generally finds a match which is long enough.
+
+deflate() also defers the selection of matches with a lazy evaluation
+mechanism. After a match of length N has been found, deflate() searches for
+a longer match at the next input byte. If a longer match is found, the
+previous match is truncated to a length of one (thus producing a single
+literal byte) and the process of lazy evaluation begins again. Otherwise,
+the original match is kept, and the next match search is attempted only N
+steps later.
+
+The lazy match evaluation is also subject to a runtime parameter. If
+the current match is long enough, deflate() reduces the search for a longer
+match, thus speeding up the whole process. If compression ratio is more
+important than speed, deflate() attempts a complete second search even if
+the first match is already long enough.
+
+The lazy match evaluation is not performed for the fastest compression
+modes (level parameter 1 to 3). For these fast modes, new strings
+are inserted in the hash table only when no match was found, or
+when the match is not too long. This degrades the compression ratio
+but saves time since there are both fewer insertions and fewer searches.
+
+
+2. Decompression algorithm (inflate)
+
+2.1 Introduction
+
+The real question is, given a Huffman tree, how to decode fast.  The most
+important realization is that shorter codes are much more common than
+longer codes, so pay attention to decoding the short codes fast, and let
+the long codes take longer to decode.
+
+inflate() sets up a first level table that covers some number of bits of
+input less than the length of longest code.  It gets that many bits from the
+stream, and looks it up in the table.  The table will tell if the next
+code is that many bits or less and how many, and if it is, it will tell
+the value, else it will point to the next level table for which inflate()
+grabs more bits and tries to decode a longer code.
+
+How many bits to make the first lookup is a tradeoff between the time it
+takes to decode and the time it takes to build the table.  If building the
+table took no time (and if you had infinite memory), then there would only
+be a first level table to cover all the way to the longest code.  However,
+building the table ends up taking a lot longer for more bits since short
+codes are replicated many times in such a table.  What inflate() does is
+simply to make the number of bits in the first table a variable, and set it
+for the maximum speed.
+
+inflate() sends new trees relatively often, so it is possibly set for a
+smaller first level table than an application that has only one tree for
+all the data.  For inflate, which has 286 possible codes for the
+literal/length tree, the size of the first table is nine bits.  Also the
+distance trees have 30 possible values, and the size of the first table is
+six bits.  Note that for each of those cases, the table ended up one bit
+longer than the ``average'' code length, i.e. the code length of an
+approximately flat code which would be a little more than eight bits for
+286 symbols and a little less than five bits for 30 symbols.  It would be
+interesting to see if optimizing the first level table for other
+applications gave values within a bit or two of the flat code size.
+
+
+2.2 More details on the inflate table lookup
+
+Ok, you want to know what this cleverly obfuscated inflate tree actually  
+looks like.  You are correct that it's not a Huffman tree.  It is simply a  
+lookup table for the first, let's say, nine bits of a Huffman symbol.  The  
+symbol could be as short as one bit or as long as 15 bits.  If a particular  
+symbol is shorter than nine bits, then that symbol's translation is duplicated
+in all those entries that start with that symbol's bits.  For example, if the  
+symbol is four bits, then it's duplicated 32 times in a nine-bit table.  If a  
+symbol is nine bits long, it appears in the table once.
+
+If the symbol is longer than nine bits, then that entry in the table points  
+to another similar table for the remaining bits.  Again, there are duplicated  
+entries as needed.  The idea is that most of the time the symbol will be short
+and there will only be one table look up.  (That's whole idea behind data  
+compression in the first place.)  For the less frequent long symbols, there  
+will be two lookups.  If you had a compression method with really long  
+symbols, you could have as many levels of lookups as is efficient.  For  
+inflate, two is enough.
+
+So a table entry either points to another table (in which case nine bits in  
+the above example are gobbled), or it contains the translation for the symbol  
+and the number of bits to gobble.  Then you start again with the next  
+ungobbled bit.
+
+You may wonder: why not just have one lookup table for how ever many bits the  
+longest symbol is?  The reason is that if you do that, you end up spending  
+more time filling in duplicate symbol entries than you do actually decoding.   
+At least for deflate's output that generates new trees every several 10's of  
+kbytes.  You can imagine that filling in a 2^15 entry table for a 15-bit code  
+would take too long if you're only decoding several thousand symbols.  At the  
+other extreme, you could make a new table for every bit in the code.  In fact,
+that's essentially a Huffman tree.  But then you spend two much time  
+traversing the tree while decoding, even for short symbols.
+
+So the number of bits for the first lookup table is a trade of the time to  
+fill out the table vs. the time spent looking at the second level and above of
+the table.
+
+Here is an example, scaled down:
+
+The code being decoded, with 10 symbols, from 1 to 6 bits long:
+
+A: 0
+B: 10
+C: 1100
+D: 11010
+E: 11011
+F: 11100
+G: 11101
+H: 11110
+I: 111110
+J: 111111
+
+Let's make the first table three bits long (eight entries):
+
+000: A,1
+001: A,1
+010: A,1
+011: A,1
+100: B,2
+101: B,2
+110: -> table X (gobble 3 bits)
+111: -> table Y (gobble 3 bits)
+
+Each entry is what the bits decode to and how many bits that is, i.e. how  
+many bits to gobble.  Or the entry points to another table, with the number of
+bits to gobble implicit in the size of the table.
+
+Table X is two bits long since the longest code starting with 110 is five bits
+long:
+
+00: C,1
+01: C,1
+10: D,2
+11: E,2
+
+Table Y is three bits long since the longest code starting with 111 is six  
+bits long:
+
+000: F,2
+001: F,2
+010: G,2
+011: G,2
+100: H,2
+101: H,2
+110: I,3
+111: J,3
+
+So what we have here are three tables with a total of 20 entries that had to  
+be constructed.  That's compared to 64 entries for a single table.  Or  
+compared to 16 entries for a Huffman tree (six two entry tables and one four  
+entry table).  Assuming that the code ideally represents the probability of  
+the symbols, it takes on the average 1.25 lookups per symbol.  That's compared
+to one lookup for the single table, or 1.66 lookups per symbol for the  
+Huffman tree.
+
+There, I think that gives you a picture of what's going on.  For inflate, the  
+meaning of a particular symbol is often more than just a letter.  It can be a  
+byte (a "literal"), or it can be either a length or a distance which  
+indicates a base value and a number of bits to fetch after the code that is  
+added to the base value.  Or it might be the special end-of-block code.  The  
+data structures created in inftrees.c try to encode all that information  
+compactly in the tables.
+
+
+Jean-loup Gailly        Mark Adler
+jloup@gzip.org          madler@alumni.caltech.edu
+
+
+References:
+
+[LZ77] Ziv J., Lempel A., ``A Universal Algorithm for Sequential Data
+Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3,
+pp. 337-343.
+
+``DEFLATE Compressed Data Format Specification'' available in
+ftp://ds.internic.net/rfc/rfc1951.txt

amiga/Makefile.pup

@@ -0,0 +1,66 @@
+# Amiga powerUP (TM) Makefile
+# makefile for libpng and SAS C V6.58/7.00 PPC compiler
+# Copyright (C) 1998 by Andreas R. Kleinert
+
+CC       = scppc
+CFLAGS   = NOSTKCHK NOSINT OPTIMIZE OPTGO OPTPEEP OPTINLOCAL OPTINL \
+           OPTLOOP OPTRDEP=8 OPTDEP=8 OPTCOMP=8
+LIBNAME  = libzip.a
+AR       = ppc-amigaos-ar
+AR_FLAGS = cr
+RANLIB   = ppc-amigaos-ranlib
+LDFLAGS  = -r -o
+LDLIBS   = LIB:scppc.a
+LN       = ppc-amigaos-ld
+RM       = delete quiet
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example minigzip
+
+test: all
+        example
+        echo hello world | minigzip | minigzip -d
+
+$(LIBNAME): $(OBJS)
+            $(AR) $(AR_FLAGS) $@ $(OBJS)
+            $(RANLIB) $@
+
+example: example.o $(LIBNAME)
+        $(LN) $(LDFLAGS) example LIB:c_ppc.o example.o $(LIBNAME) $(LDLIBS) LIB:end.o
+
+minigzip: minigzip.o $(LIBNAME)
+        $(LN) $(LDFLAGS) minigzip LIB:c_ppc.o minigzip.o $(LIBNAME) $(LDLIBS) LIB:end.o
+
+clean:
+        $(RM) *.o example minigzip $(LIBNAME) foo.gz
+
+zip:
+        zip -ul9 zlib README ChangeLog Makefile Make????.??? Makefile.?? \
+          descrip.mms *.[ch]
+
+tgz:
+        cd ..; tar cfz zlib/zlib.tgz zlib/README zlib/ChangeLog zlib/Makefile \
+          zlib/Make????.??? zlib/Makefile.?? zlib/descrip.mms zlib/*.[ch]
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zutil.h zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: zutil.h zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzio.o: zutil.h zlib.h zconf.h
+infblock.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
+infcodes.o: zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h inffast.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h infblock.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+infutil.o: zutil.h zlib.h zconf.h inftrees.h infutil.h
+minigzip.o: zlib.h zconf.h
+trees.o: deflate.h zutil.h zlib.h zconf.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h

amiga/Makefile.sas

@@ -0,0 +1,64 @@
+# SMakefile for zlib
+# Modified from the standard UNIX Makefile Copyright Jean-loup Gailly
+# Osma Ahvenlampi <Osma.Ahvenlampi@hut.fi>
+# Amiga, SAS/C 6.56 & Smake
+
+CC=sc
+CFLAGS=OPT
+#CFLAGS=OPT CPU=68030
+#CFLAGS=DEBUG=LINE
+LDFLAGS=LIB z.lib
+
+SCOPTIONS=OPTSCHED OPTINLINE OPTALIAS OPTTIME OPTINLOCAL STRMERGE \
+       NOICONS PARMS=BOTH NOSTACKCHECK UTILLIB NOVERSION ERRORREXX 
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: SCOPTIONS example minigzip
+
+test: all
+	`cd`/example
+	echo hello world | minigzip | minigzip -d 
+
+install: z.lib
+	copy zlib.h zconf.h INCLUDE: clone
+	copy z.lib LIB: clone
+
+z.lib: $(OBJS)
+	oml z.lib r $(OBJS)
+
+example: example.o z.lib
+	$(CC) $(CFLAGS) LINK TO $@ example.o $(LDFLAGS)
+
+minigzip: minigzip.o z.lib
+	$(CC) $(CFLAGS) LINK TO $@ minigzip.o $(LDFLAGS)
+
+clean:
+	-delete force quiet *.o example minigzip z.lib foo.gz *.lnk SCOPTIONS
+
+SCOPTIONS: Smakefile
+        copy to $@ <from <
+$(SCOPTIONS)
+<
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zutil.h zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: zutil.h zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzio.o: zutil.h zlib.h zconf.h
+infblock.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
+infcodes.o: zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h inffast.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h infblock.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+infutil.o: zutil.h zlib.h zconf.h inftrees.h infutil.h
+minigzip.o: zlib.h zconf.h
+trees.o: deflate.h zutil.h zlib.h zconf.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h

compress.c

@@ -1,38 +1,39 @@
 /* compress.c -- compress a memory buffer
- * Copyright (C) 1995-1996 Jean-loup Gailly.
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
-/* $Id: compress.c,v 1.6 1995/05/03 17:27:08 jloup Exp $ */
+/* @(#) $Id$ */
 
 #include "zlib.h"
 
 /* ===========================================================================
-     Compresses the source buffer into the destination buffer.  sourceLen is
-   the byte length of the source buffer. Upon entry, destLen is the total
-   size of the destination buffer, which must be at least 0.1% larger than
-   sourceLen plus 8 bytes. Upon exit, destLen is the actual size of the
-   compressed buffer.
-     This function can be used to compress a whole file at once if the
-   input file is mmap'ed.
-     compress returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_BUF_ERROR if there was not enough room in the output
-   buffer.
+     Compresses the source buffer into the destination buffer. The level
+   parameter has the same meaning as in deflateInit.  sourceLen is the byte
+   length of the source buffer. Upon entry, destLen is the total size of the
+   destination buffer, which must be at least 0.1% larger than sourceLen plus
+   12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+
+     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+   Z_STREAM_ERROR if the level parameter is invalid.
 */
-int compress (dest, destLen, source, sourceLen)
+int ZEXPORT compress2 (dest, destLen, source, sourceLen, level)
     Bytef *dest;
     uLongf *destLen;
     const Bytef *source;
     uLong sourceLen;
+    int level;
 {
     z_stream stream;
     int err;
 
     stream.next_in = (Bytef*)source;
     stream.avail_in = (uInt)sourceLen;
+#ifdef MAXSEG_64K
     /* Check for source > 64K on 16-bit machine: */
     if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
-
+#endif
     stream.next_out = dest;
     stream.avail_out = (uInt)*destLen;
     if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
@@ -41,7 +42,7 @@ int compress (dest, destLen, source, sourceLen)
     stream.zfree = (free_func)0;
     stream.opaque = (voidpf)0;
 
-    err = deflateInit(&stream, Z_DEFAULT_COMPRESSION);
+    err = deflateInit(&stream, level);
     if (err != Z_OK) return err;
 
     err = deflate(&stream, Z_FINISH);
@@ -54,3 +55,14 @@ int compress (dest, destLen, source, sourceLen)
     err = deflateEnd(&stream);
     return err;
 }
+
+/* ===========================================================================
+ */
+int ZEXPORT compress (dest, destLen, source, sourceLen)
+    Bytef *dest;
+    uLongf *destLen;
+    const Bytef *source;
+    uLong sourceLen;
+{
+    return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION);
+}

configure

@@ -4,78 +4,209 @@
 # of if you need special compiler, flags or install directory.
 # Otherwise, you can just use directly "make test; make install"
 #
+# To create a shared library, use "configure --shared"; by default a static
+# library is created. If the primitive shared library support provided here
+# does not work, use ftp://prep.ai.mit.edu/pub/gnu/libtool-*.tar.gz
+#
 # To impose specific compiler or flags or install directory, use for example:
 #    prefix=$HOME CC=cc CFLAGS="-O4" ./configure
 # or for csh/tcsh users:
 #    (setenv prefix $HOME; setenv CC cc; setenv CFLAGS "-O4"; ./configure)
 # LDSHARED is the command to be used to create a shared library
 
+# Incorrect settings of CC or CFLAGS may prevent creating a shared library.
+# If you have problems, try without defining CC and CFLAGS before reporting
+# an error.
+
 LIBS=libz.a
+SHAREDLIB=libz.so
 VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`
 AR=${AR-"ar rc"}
+RANLIB=${RANLIB-"ranlib"}
 prefix=${prefix-/usr/local}
-exec_prefix=${exec_prefix-$prefix}
+exec_prefix=${exec_prefix-'${prefix}'}
+libdir=${libdir-'${exec_prefix}/lib'}
+includedir=${includedir-'${prefix}/include'}
+shared_ext='.so'
+shared=0
+gcc=0
+old_cc="$CC"
+old_cflags="$CFLAGS"
+
+while test $# -ge 1
+do
+case "$1" in
+    -h* | --h*)
+      echo 'usage:'
+      echo '  configure [--shared] [--prefix=PREFIX]  [--exec_prefix=EXPREFIX]'
+      echo '     [--libdir=LIBDIR] [--includedir=INCLUDEDIR]'
+        exit 0;;
+    -p*=* | --p*=*) prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
+    -e*=* | --e*=*) exec_prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
+    -l*=* | --libdir=*) libdir=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
+    -i*=* | --includedir=*) includedir=`echo $1 | sed 's/[-a-z_]*=//'`;shift;;
+    -p* | --p*) prefix="$2"; shift; shift;;
+    -e* | --e*) exec_prefix="$2"; shift; shift;;
+    -l* | --l*) libdir="$2"; shift; shift;;
+    -i* | --i*) includedir="$2"; shift; shift;;
+    -s* | --s*) shared=1; shift;;
+    esac
+done
 
-test -z "$CC" && echo Checking for gcc...
 test=ztest$$
 cat > $test.c <<EOF
-int hello() { printf("hello\n"); }
+extern int getchar();
+int hello() {return getchar();}
 EOF
-if test -z "$CC" && (gcc -c -O3 $test.c) 2>/dev/null; then
-  CC=gcc
+
+test -z "$CC" && echo Checking for gcc...
+cc=${CC-gcc}
+cflags=${CFLAGS-"-O3"}
+# to force the asm version use: CFLAGS="-O3 -DASMV" ./configure
+case "$cc" in
+  *gcc*) gcc=1;;
+esac
+
+if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
+  CC="$cc"
   SFLAGS=${CFLAGS-"-fPIC -O3"}
-  CFLAGS=${CFLAGS-"-O3"}
-  LDSHARED=${LDSHARED-"gcc -shared"}
+  CFLAGS="$cflags"
+  case `(uname -s || echo unknown) 2>/dev/null` in
+  Linux | linux) LDSHARED=${LDSHARED-"gcc -shared -Wl,-soname,libz.so.1"};;
+  *)             LDSHARED=${LDSHARED-"gcc -shared"};;
+  esac
 else
   # find system name and corresponding cc options
   CC=${CC-cc}
   case `(uname -sr || echo unknown) 2>/dev/null` in
+  HP-UX*)    SFLAGS=${CFLAGS-"-O +z"}
+	     CFLAGS=${CFLAGS-"-O"}
+#	     LDSHARED=${LDSHARED-"ld -b +vnocompatwarnings"}
+	     LDSHARED=${LDSHARED-"ld -b"}
+	     shared_ext='.sl'
+	     SHAREDLIB='libz.sl';;
+  IRIX*)     SFLAGS=${CFLAGS-"-ansi -O2 -rpath ."}
+	     CFLAGS=${CFLAGS-"-ansi -O2"}
+	     LDSHARED=${LDSHARED-"cc -shared"};;
+  OSF1\ V4*) SFLAGS=${CFLAGS-"-O -std1"}
+	     CFLAGS=${CFLAGS-"-O -std1"}
+	     LDSHARED=${LDSHARED-"cc -shared  -Wl,-soname,$SHAREDLIB -Wl,-msym -Wl,-rpath,$(libdir) -Wl,-set_version,${VER}:1.0"};;
+  OSF1*)     SFLAGS=${CFLAGS-"-O -std1"}
+	     CFLAGS=${CFLAGS-"-O -std1"}
+	     LDSHARED=${LDSHARED-"cc -shared"};;
+  QNX*)      SFLAGS=${CFLAGS-"-4 -O"}
+             CFLAGS=${CFLAGS-"-4 -O"}
+	     LDSHARED=${LDSHARED-"cc"}
+             RANLIB=${RANLIB-"true"}
+             AR="cc -A";;
+  SCO_SV\ 3.2*) SFLAGS=${CFLAGS-"-O3 -dy -KPIC "}
+	     CFLAGS=${CFLAGS-"-O3"}
+	     LDSHARED=${LDSHARED-"cc -dy -KPIC -G"};;
   SunOS\ 5*) SFLAGS=${CFLAGS-"-fast -xcg89 -KPIC -R."}
              CFLAGS=${CFLAGS-"-fast -xcg89"}
 	     LDSHARED=${LDSHARED-"cc -G"};;
   SunOS\ 4*) SFLAGS=${CFLAGS-"-O2 -PIC"}
 	     CFLAGS=${CFLAGS-"-O2"}
 	     LDSHARED=${LDSHARED-"ld"};;
-  IRIX*)     SFLAGS=${CFLAGS-"-O2 -rpath ."}
-	     CFLAGS=${CFLAGS-"-O2"}
-	     LDSHARED=${LDSHARED-"cc -shared"};;
-  QNX*)      SFLAGS=${CFLAGS-"-4 -O -Q"}
-             CFLAGS=${CFLAGS-"-4 -O -Q"}
-	     LDSHARED=${LDSHARED-"cc"}
-             LIBS=zlib.lib
-             AR="cc -A";;
-  # send working options for other systems to gzip@prep.ai.mit.edu
+  UNIX_System_V\ 4.2.0) 
+	     SFLAGS=${CFLAGS-"-KPIC -O"}
+	     CFLAGS=${CFLAGS-"-O"}
+	     LDSHARED=${LDSHARED-"cc -G"};;
+  UNIX_SV\ 4.2MP)
+	     SFLAGS=${CFLAGS-"-Kconform_pic -O"}
+	     CFLAGS=${CFLAGS-"-O"}
+	     LDSHARED=${LDSHARED-"cc -G"};;
+  # send working options for other systems to support@gzip.org
   *)         SFLAGS=${CFLAGS-"-O"}
 	     CFLAGS=${CFLAGS-"-O"}
-	     LDSHARED=${LDSHARED-"-shared"};;
+	     LDSHARED=${LDSHARED-"cc -shared"};;
   esac
 fi
 
-echo Checking for shared library support...
-# we must test in two steps (cc then ld), required at least on SunOS 4.x
-if test "`$CC -c $SFLAGS $test.c 2>&1`" = "" &&
-   test "`$LDSHARED -o $test.so $test.o 2>&1`" = ""; then
-  CFLAGS="$SFLAGS"
-  LIBS='libz.so.$(VER)'
-  echo Building shared library libz.so.$VER with $CC.
-else
+if test $shared -eq 1; then
+  echo Checking for shared library support...
+  # we must test in two steps (cc then ld), required at least on SunOS 4.x
+  if test "`($CC -c $SFLAGS $test.c) 2>&1`" = "" &&
+     test "`($LDSHARED -o $test$shared_ext $test.o) 2>&1`" = ""; then
+    CFLAGS="$SFLAGS"
+    LIBS="$SHAREDLIB.$VER"
+    echo Building shared library $SHAREDLIB.$VER with $CC.
+  elif test -z "$old_cc" -a -z "$old_cflags"; then
+    echo No shared library suppport.
+    shared=0;
+  else
+    echo 'No shared library suppport; try without defining CC and CFLAGS'
+    shared=0;
+  fi
+fi
+if test $shared -eq 0; then
   LDSHARED="$CC"
   echo Building static library $LIBS version $VER with $CC.
 fi
-rm -f $test.[co] $test.so
+
+cat > $test.c <<EOF
+#include <unistd.h>
+int main() { return 0; }
+EOF
+if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+  CFLAGS="$CFLAGS -DHAVE_UNISTD_H"
+  echo "Checking for unistd.h... Yes."
+else
+  echo "Checking for unistd.h... No."
+fi
+
+cat > $test.c <<EOF
+#include <errno.h>
+int main() { return 0; }
+EOF
+if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+  echo "Checking for errno.h...	 Yes."
+else
+  echo "Checking for errno.h...	 No."
+  CFLAGS="$CFLAGS -DNO_ERRNO_H"
+fi
+
+cat > $test.c <<EOF
+#include <sys/types.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+caddr_t hello() {
+  return mmap((caddr_t)0, (off_t)0, PROT_READ, MAP_SHARED, 0, (off_t)0); 
+}
+EOF
+if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+  CFLAGS="$CFLAGS -DUSE_MMAP"
+  echo Checking for mmap support... Yes.
+else
+  echo Checking for mmap support... No.
+fi
+
+CPP=${CPP-"$CC -E"}
+case $CFLAGS in
+  *ASMV*)
+    if test "`nm $test.o | grep _hello`" = ""; then
+      CPP="$CPP -DNO_UNDERLINE"
+      echo Checking for underline in external names... No.
+    else
+      echo Checking for underline in external names... Yes.
+    fi;;
+esac
+
+rm -f $test.[co] $test$shared_ext
 
 # udpate Makefile
-# ed -s Makefile <<EOF
 sed < Makefile.in "
-/^CC *=/s/=.*/=$CC/
-/^CFLAGS *=/s/=.*/=$CFLAGS/
-/^LDSHARED *=/s/=.*/=$LDSHARED/
-/^LIBS *=/s,=.*,=$LIBS,
-/^AR *=/s/=.*/=$AR/
-/^VER *=/s/=.*/=$VER/
-/^prefix *=/s,=.*,=$prefix,
-/^exec_prefix *=/s,=.*,=$exec_prefix,
+/^CC *=/s%=.*%=$CC%
+/^CFLAGS *=/s%=.*%=$CFLAGS%
+/^CPP *=/s%=.*%=$CPP%
+/^LDSHARED *=/s%=.*%=$LDSHARED%
+/^LIBS *=/s%=.*%=$LIBS%
+/^SHAREDLIB *=/s%=.*%=$SHAREDLIB%
+/^AR *=/s%=.*%=$AR%
+/^RANLIB *=/s%=.*%=$RANLIB%
+/^VER *=/s%=.*%=$VER%
+/^prefix *=/s%=.*%=$prefix%
+/^exec_prefix *=/s%=.*%=$exec_prefix%
+/^libdir *=/s%=.*%=$libdir%
+/^includedir *=/s%=.*%=$includedir%
 " > Makefile
-#w
-#q
-#EOF

contrib/README.contrib

@@ -0,0 +1,34 @@
+All files under this contrib directory are UNSUPPORTED. There were
+provided by users of zlib and were not tested by the authors of zlib.
+Use at your own risk. Please contact the authors of the contributions
+for help about these, not the zlib authors. Thanks.
+
+
+asm386/     by Gilles Vollant <info@winimage.com>
+	386 asm code replacing longest_match(), for Visual C++ 4.2 and ML 6.11c
+
+asm586/ and asm686/    by Brian Raiter <breadbox@muppetlabs.com> 
+        asm code for Pentium and Pentium Pro
+        See http://www.muppetlabs.com/~breadbox/software/assembly.html
+
+delphi/      by Bob Dellaca <bobdl@xtra.co.nz>
+	Support for Delphi
+
+delphi2/     by Davide Moretti <dave@rimini.com>
+        Another support for C++Builder and Delphi
+
+minizip/    by Gilles Vollant <info@winimage.com>
+	Mini zip and unzip based on zlib
+        See http://www.winimage.com/zLibDll/unzip.html
+
+iostream/   by Kevin Ruland <kevin@rodin.wustl.edu>
+        A C++ I/O streams interface to the zlib gz* functions
+
+iostream2/  by Tyge L<>vset <Tyge.Lovset@cmr.no>
+	Another C++ I/O streams interface
+
+untgz/      by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+	A very simple tar.gz file extractor using zlib
+
+visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
+        How to use compress(), uncompress() and the gz* functions from VB.

contrib/asm386/gvmat32.asm

@@ -0,0 +1,559 @@
+;
+; gvmat32.asm -- Asm portion of the optimized longest_match for 32 bits x86
+; Copyright (C) 1995-1996 Jean-loup Gailly and Gilles Vollant.
+; File written by Gilles Vollant, by modifiying the longest_match
+;  from Jean-loup Gailly in deflate.c
+; It need wmask == 0x7fff
+;     (assembly code is faster with a fixed wmask)
+;
+; For Visual C++ 4.2 and ML 6.11c (version in directory \MASM611C of Win95 DDK)
+;   I compile with : "ml /coff /Zi /c gvmat32.asm"
+;
+
+;uInt longest_match_7fff(s, cur_match)
+;    deflate_state *s;
+;    IPos cur_match;                             /* current match */
+
+        NbStack         equ     76
+        cur_match       equ     dword ptr[esp+NbStack-0]
+        str_s           equ     dword ptr[esp+NbStack-4]
+; 5 dword on top (ret,ebp,esi,edi,ebx)
+        adrret          equ     dword ptr[esp+NbStack-8]
+        pushebp         equ     dword ptr[esp+NbStack-12]
+        pushedi         equ     dword ptr[esp+NbStack-16]
+        pushesi         equ     dword ptr[esp+NbStack-20]
+        pushebx         equ     dword ptr[esp+NbStack-24]
+
+        chain_length    equ     dword ptr [esp+NbStack-28]
+        limit           equ     dword ptr [esp+NbStack-32]
+        best_len        equ     dword ptr [esp+NbStack-36]
+        window          equ     dword ptr [esp+NbStack-40]
+        prev            equ     dword ptr [esp+NbStack-44]
+        scan_start      equ      word ptr [esp+NbStack-48]
+        wmask           equ     dword ptr [esp+NbStack-52]
+        match_start_ptr equ     dword ptr [esp+NbStack-56]
+        nice_match      equ     dword ptr [esp+NbStack-60]
+        scan            equ     dword ptr [esp+NbStack-64]
+
+        windowlen       equ     dword ptr [esp+NbStack-68]
+        match_start     equ     dword ptr [esp+NbStack-72]
+        strend          equ     dword ptr [esp+NbStack-76]
+        NbStackAdd      equ     (NbStack-24)
+
+    .386p
+
+    name    gvmatch
+    .MODEL  FLAT
+
+
+
+;  all the +4 offsets are due to the addition of pending_buf_size (in zlib
+;  in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, remove the +4).
+;  Note : these value are good with a 8 bytes boundary pack structure
+    dep_chain_length    equ     70h+4
+    dep_window          equ     2ch+4
+    dep_strstart        equ     60h+4
+    dep_prev_length     equ     6ch+4
+    dep_nice_match      equ     84h+4
+    dep_w_size          equ     20h+4
+    dep_prev            equ     34h+4
+    dep_w_mask          equ     28h+4
+    dep_good_match      equ     80h+4
+    dep_match_start     equ     64h+4
+    dep_lookahead       equ     68h+4
+
+
+_TEXT                   segment
+
+IFDEF NOUNDERLINE
+                        public  longest_match_7fff
+;                        public  match_init
+ELSE
+                        public  _longest_match_7fff
+;                        public  _match_init
+ENDIF
+
+    MAX_MATCH           equ     258
+    MIN_MATCH           equ     3
+    MIN_LOOKAHEAD       equ     (MAX_MATCH+MIN_MATCH+1)
+
+
+
+IFDEF NOUNDERLINE
+;match_init      proc near
+;                ret
+;match_init      endp
+ELSE
+;_match_init     proc near
+;                ret
+;_match_init     endp
+ENDIF
+
+
+IFDEF NOUNDERLINE
+longest_match_7fff   proc near
+ELSE
+_longest_match_7fff  proc near
+ENDIF
+
+        mov     edx,[esp+4]
+
+
+
+        push    ebp
+        push    edi
+        push    esi
+        push    ebx
+
+        sub     esp,NbStackAdd
+
+; initialize or check the variables used in match.asm.
+        mov     ebp,edx
+
+; chain_length = s->max_chain_length
+; if (prev_length>=good_match) chain_length >>= 2
+        mov     edx,[ebp+dep_chain_length]
+        mov     ebx,[ebp+dep_prev_length]
+        cmp     [ebp+dep_good_match],ebx
+        ja      noshr
+        shr     edx,2
+noshr:
+; we increment chain_length because in the asm, the --chain_lenght is in the beginning of the loop
+        inc     edx
+        mov     edi,[ebp+dep_nice_match]
+        mov     chain_length,edx
+        mov     eax,[ebp+dep_lookahead]
+        cmp     eax,edi
+; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+        jae     nolookaheadnicematch
+        mov     edi,eax
+nolookaheadnicematch:
+; best_len = s->prev_length
+        mov     best_len,ebx
+
+; window = s->window
+        mov     esi,[ebp+dep_window]
+        mov     ecx,[ebp+dep_strstart]
+        mov     window,esi
+
+        mov     nice_match,edi
+; scan = window + strstart
+        add     esi,ecx
+        mov     scan,esi
+; dx = *window
+        mov     dx,word ptr [esi]
+; bx = *(window+best_len-1)
+        mov     bx,word ptr [esi+ebx-1]
+        add     esi,MAX_MATCH-1
+; scan_start = *scan
+        mov     scan_start,dx
+; strend = scan + MAX_MATCH-1
+        mov     strend,esi
+; bx = scan_end = *(window+best_len-1)
+
+;    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+;        s->strstart - (IPos)MAX_DIST(s) : NIL;
+
+        mov     esi,[ebp+dep_w_size]
+        sub     esi,MIN_LOOKAHEAD
+; here esi = MAX_DIST(s)
+        sub     ecx,esi
+        ja      nodist
+        xor     ecx,ecx
+nodist:
+        mov     limit,ecx
+
+; prev = s->prev
+        mov     edx,[ebp+dep_prev]
+        mov     prev,edx
+
+;
+        mov     edx,dword ptr [ebp+dep_match_start]
+        mov     bp,scan_start
+        mov     eax,cur_match
+        mov     match_start,edx
+
+        mov     edx,window
+        mov     edi,edx
+        add     edi,best_len
+        mov     esi,prev
+        dec     edi
+; windowlen = window + best_len -1
+        mov     windowlen,edi
+
+        jmp     beginloop2
+        align   4
+
+; here, in the loop
+;       eax = ax = cur_match
+;       ecx = limit
+;        bx = scan_end
+;        bp = scan_start
+;       edi = windowlen (window + best_len -1)
+;       esi = prev
+
+
+;// here; chain_length <=16
+normalbeg0add16:
+        add     chain_length,16
+        jz      exitloop
+normalbeg0:
+        cmp     word ptr[edi+eax],bx
+        je      normalbeg2noroll
+rcontlabnoroll:
+; cur_match = prev[cur_match & wmask]
+        and     eax,7fffh
+        mov     ax,word ptr[esi+eax*2]
+; if cur_match > limit, go to exitloop
+        cmp     ecx,eax
+        jnb     exitloop
+; if --chain_length != 0, go to exitloop
+        dec     chain_length
+        jnz     normalbeg0
+        jmp     exitloop
+
+normalbeg2noroll:
+; if (scan_start==*(cur_match+window)) goto normalbeg2
+        cmp     bp,word ptr[edx+eax]
+        jne     rcontlabnoroll
+        jmp     normalbeg2
+
+contloop3:
+        mov     edi,windowlen
+
+; cur_match = prev[cur_match & wmask]
+        and     eax,7fffh
+        mov     ax,word ptr[esi+eax*2]
+; if cur_match > limit, go to exitloop
+        cmp     ecx,eax
+jnbexitloopshort1:
+        jnb     exitloop
+; if --chain_length != 0, go to exitloop
+
+
+; begin the main loop
+beginloop2:
+        sub     chain_length,16+1
+; if chain_length <=16, don't use the unrolled loop
+        jna     normalbeg0add16
+
+do16:
+        cmp     word ptr[edi+eax],bx
+        je      normalbeg2dc0
+
+maccn   MACRO   lab
+        and     eax,7fffh
+        mov     ax,word ptr[esi+eax*2]
+        cmp     ecx,eax
+        jnb     exitloop
+        cmp     word ptr[edi+eax],bx
+        je      lab
+        ENDM
+
+rcontloop0:
+        maccn   normalbeg2dc1
+
+rcontloop1:
+        maccn   normalbeg2dc2
+
+rcontloop2:
+        maccn   normalbeg2dc3
+
+rcontloop3:
+        maccn   normalbeg2dc4
+
+rcontloop4:
+        maccn   normalbeg2dc5
+
+rcontloop5:
+        maccn   normalbeg2dc6
+
+rcontloop6:
+        maccn   normalbeg2dc7
+
+rcontloop7:
+        maccn   normalbeg2dc8
+
+rcontloop8:
+        maccn   normalbeg2dc9
+
+rcontloop9:
+        maccn   normalbeg2dc10
+
+rcontloop10:
+        maccn   short normalbeg2dc11
+
+rcontloop11:
+        maccn   short normalbeg2dc12
+
+rcontloop12:
+        maccn   short normalbeg2dc13
+
+rcontloop13:
+        maccn   short normalbeg2dc14
+
+rcontloop14:
+        maccn   short normalbeg2dc15
+
+rcontloop15:
+        and     eax,7fffh
+        mov     ax,word ptr[esi+eax*2]
+        cmp     ecx,eax
+        jnb     exitloop
+
+        sub     chain_length,16
+        ja      do16
+        jmp     normalbeg0add16
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+normbeg MACRO   rcontlab,valsub
+; if we are here, we know that *(match+best_len-1) == scan_end
+        cmp     bp,word ptr[edx+eax]
+; if (match != scan_start) goto rcontlab
+        jne     rcontlab
+; calculate the good chain_length, and we'll compare scan and match string
+        add     chain_length,16-valsub
+        jmp     iseq
+        ENDM
+
+
+normalbeg2dc11:
+        normbeg rcontloop11,11
+
+normalbeg2dc12:
+        normbeg short rcontloop12,12
+
+normalbeg2dc13:
+        normbeg short rcontloop13,13
+
+normalbeg2dc14:
+        normbeg short rcontloop14,14
+
+normalbeg2dc15:
+        normbeg short rcontloop15,15
+
+normalbeg2dc10:
+        normbeg rcontloop10,10
+
+normalbeg2dc9:
+        normbeg rcontloop9,9
+
+normalbeg2dc8:
+        normbeg rcontloop8,8
+
+normalbeg2dc7:
+        normbeg rcontloop7,7
+
+normalbeg2dc6:
+        normbeg rcontloop6,6
+
+normalbeg2dc5:
+        normbeg rcontloop5,5
+
+normalbeg2dc4:
+        normbeg rcontloop4,4
+
+normalbeg2dc3:
+        normbeg rcontloop3,3
+
+normalbeg2dc2:
+        normbeg rcontloop2,2
+
+normalbeg2dc1:
+        normbeg rcontloop1,1
+
+normalbeg2dc0:
+        normbeg rcontloop0,0
+
+
+; we go in normalbeg2 because *(ushf*)(match+best_len-1) == scan_end
+
+normalbeg2:
+        mov     edi,window
+
+        cmp     bp,word ptr[edi+eax]
+        jne     contloop3                   ; if *(ushf*)match != scan_start, continue
+
+iseq:
+; if we are here, we know that *(match+best_len-1) == scan_end
+; and (match == scan_start)
+
+        mov     edi,edx
+        mov     esi,scan                    ; esi = scan
+        add     edi,eax                     ; edi = window + cur_match = match
+
+        mov     edx,[esi+3]                 ; compare manually dword at match+3
+        xor     edx,[edi+3]                 ; and scan +3
+
+        jz      begincompare                ; if equal, go to long compare
+
+; we will determine the unmatch byte and calculate len (in esi)
+        or      dl,dl
+        je      eq1rr
+        mov     esi,3
+        jmp     trfinval
+eq1rr:
+        or      dx,dx
+        je      eq1
+
+        mov     esi,4
+        jmp     trfinval
+eq1:
+        and     edx,0ffffffh
+        jz      eq11
+        mov     esi,5
+        jmp     trfinval
+eq11:
+        mov     esi,6
+        jmp     trfinval
+
+begincompare:
+        ; here we now scan and match begin same
+        add     edi,6
+        add     esi,6
+        mov     ecx,(MAX_MATCH-(2+4))/4     ; scan for at most MAX_MATCH bytes
+        repe    cmpsd                       ; loop until mismatch
+
+        je      trfin                       ; go to trfin if not unmatch
+; we determine the unmatch byte
+        sub     esi,4
+        mov     edx,[edi-4]
+        xor     edx,[esi]
+
+        or      dl,dl
+        jnz     trfin
+        inc     esi
+
+        or      dx,dx
+        jnz     trfin
+        inc     esi
+
+        and     edx,0ffffffh
+        jnz     trfin
+        inc     esi
+
+trfin:
+        sub     esi,scan          ; esi = len
+trfinval:
+; here we have finised compare, and esi contain len of equal string
+        cmp     esi,best_len        ; if len > best_len, go newbestlen
+        ja      short newbestlen
+; now we restore edx, ecx and esi, for the big loop
+        mov     esi,prev
+        mov     ecx,limit
+        mov     edx,window
+        jmp     contloop3
+
+newbestlen:
+        mov     best_len,esi        ; len become best_len
+
+        mov     match_start,eax     ; save new position as match_start
+        cmp     esi,nice_match      ; if best_len >= nice_match, exit
+        jae     exitloop
+        mov     ecx,scan
+        mov     edx,window          ; restore edx=window
+        add     ecx,esi
+        add     esi,edx
+
+        dec     esi
+        mov     windowlen,esi       ; windowlen = window + best_len-1
+        mov     bx,[ecx-1]          ; bx = *(scan+best_len-1) = scan_end
+
+; now we restore ecx and esi, for the big loop :
+        mov     esi,prev
+        mov     ecx,limit
+        jmp     contloop3
+
+exitloop:
+; exit : s->match_start=match_start
+        mov     ebx,match_start
+        mov     ebp,str_s
+        mov     ecx,best_len
+        mov     dword ptr [ebp+dep_match_start],ebx        
+        mov     eax,dword ptr [ebp+dep_lookahead]
+        cmp     ecx,eax
+        ja      minexlo
+        mov     eax,ecx
+minexlo:
+; return min(best_len,s->lookahead)
+        
+; restore stack and register ebx,esi,edi,ebp
+        add     esp,NbStackAdd
+
+        pop     ebx
+        pop     esi
+        pop     edi
+        pop     ebp
+        ret
+InfoAuthor:
+; please don't remove this string !
+; Your are free use gvmat32 in any fre or commercial apps if you don't remove the string in the binary!
+        db     0dh,0ah,"GVMat32 optimised assembly code written 1996-98 by Gilles Vollant",0dh,0ah
+
+
+
+IFDEF NOUNDERLINE
+longest_match_7fff   endp
+ELSE
+_longest_match_7fff  endp
+ENDIF
+
+
+IFDEF NOUNDERLINE
+cpudetect32     proc near
+ELSE
+_cpudetect32    proc near
+ENDIF
+
+
+	pushfd                  ; push original EFLAGS
+	pop     eax             ; get original EFLAGS
+	mov     ecx, eax        ; save original EFLAGS
+	xor     eax, 40000h     ; flip AC bit in EFLAGS
+	push    eax             ; save new EFLAGS value on stack
+	popfd                   ; replace current EFLAGS value
+	pushfd                  ; get new EFLAGS
+	pop     eax             ; store new EFLAGS in EAX
+	xor     eax, ecx        ; can<61>t toggle AC bit, processor=80386
+	jz      end_cpu_is_386  ; jump if 80386 processor
+	push    ecx
+	popfd                   ; restore AC bit in EFLAGS first
+
+	pushfd
+	pushfd
+	pop     ecx
+			
+	mov     eax, ecx        ; get original EFLAGS
+	xor     eax, 200000h    ; flip ID bit in EFLAGS
+	push    eax             ; save new EFLAGS value on stack
+	popfd                   ; replace current EFLAGS value
+	pushfd                  ; get new EFLAGS
+	pop		eax	            ; store new EFLAGS in EAX
+	popfd                   ; restore original EFLAGS
+	xor		eax, ecx        ; can<61>t toggle ID bit,
+	je		is_old_486		; processor=old
+
+	mov     eax,1
+	db      0fh,0a2h        ;CPUID   
+
+exitcpudetect:
+	ret
+
+end_cpu_is_386:
+	mov     eax,0300h
+	jmp     exitcpudetect
+
+is_old_486:
+	mov     eax,0400h
+	jmp     exitcpudetect
+
+IFDEF NOUNDERLINE
+cpudetect32     endp
+ELSE
+_cpudetect32    endp
+ENDIF
+
+_TEXT   ends
+end

contrib/asm386/gvmat32c.c

@@ -0,0 +1,200 @@
+/* gvmat32.c -- C portion of the optimized longest_match for 32 bits x86
+ * Copyright (C) 1995-1996 Jean-loup Gailly and Gilles Vollant.
+ * File written by Gilles Vollant, by modifiying the longest_match
+ *  from Jean-loup Gailly in deflate.c
+ *  it prepare all parameters and call the assembly longest_match_gvasm
+ *  longest_match execute standard C code is wmask != 0x7fff
+ *     (assembly code is faster with a fixed wmask)
+ *
+ */
+
+#include "deflate.h"
+
+#undef FAR
+#include <windows.h>
+
+#ifdef ASMV
+#define NIL 0
+
+#define UNALIGNED_OK
+
+
+/* if your C compiler don't add underline before function name,
+		define ADD_UNDERLINE_ASMFUNC */
+#ifdef ADD_UNDERLINE_ASMFUNC
+#define longest_match_7fff _longest_match_7fff
+#endif
+
+
+
+void match_init()
+{
+}
+
+unsigned long cpudetect32();
+
+uInt longest_match_c(
+    deflate_state *s,
+    IPos cur_match);                             /* current match */
+
+
+uInt longest_match_7fff(
+    deflate_state *s,
+    IPos cur_match);                             /* current match */
+
+uInt longest_match(
+    deflate_state *s,
+    IPos cur_match)                             /* current match */
+{
+	static uInt iIsPPro=2;
+
+    if ((s->w_mask == 0x7fff) && (iIsPPro==0))
+        return longest_match_7fff(s,cur_match);
+
+	if (iIsPPro==2)
+		iIsPPro = (((cpudetect32()/0x100)&0xf)>=6) ? 1 : 0;
+
+	return longest_match_c(s,cur_match);
+}
+
+
+
+uInt longest_match_c(s, cur_match)
+    deflate_state *s;
+    IPos cur_match;                             /* current match */
+{
+    unsigned chain_length = s->max_chain_length;/* max hash chain length */
+    register Bytef *scan = s->window + s->strstart; /* current string */
+    register Bytef *match;                       /* matched string */
+    register int len;                           /* length of current match */
+    int best_len = s->prev_length;              /* best match length so far */
+    int nice_match = s->nice_match;             /* stop if match long enough */
+    IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+        s->strstart - (IPos)MAX_DIST(s) : NIL;
+    /* Stop when cur_match becomes <= limit. To simplify the code,
+     * we prevent matches with the string of window index 0.
+     */
+    Posf *prev = s->prev;
+    uInt wmask = s->w_mask;
+
+#ifdef UNALIGNED_OK
+    /* Compare two bytes at a time. Note: this is not always beneficial.
+     * Try with and without -DUNALIGNED_OK to check.
+     */
+    register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
+    register ush scan_start = *(ushf*)scan;
+    register ush scan_end   = *(ushf*)(scan+best_len-1);
+#else
+    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
+    register Byte scan_end1  = scan[best_len-1];
+    register Byte scan_end   = scan[best_len];
+#endif
+
+    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+     * It is easy to get rid of this optimization if necessary.
+     */
+    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
+
+    /* Do not waste too much time if we already have a good match: */
+    if (s->prev_length >= s->good_match) {
+        chain_length >>= 2;
+    }
+    /* Do not look for matches beyond the end of the input. This is necessary
+     * to make deflate deterministic.
+     */
+    if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
+
+    do {
+        Assert(cur_match < s->strstart, "no future");
+        match = s->window + cur_match;
+
+        /* Skip to next match if the match length cannot increase
+         * or if the match length is less than 2:
+         */
+#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
+        /* This code assumes sizeof(unsigned short) == 2. Do not use
+         * UNALIGNED_OK if your compiler uses a different size.
+         */
+        if (*(ushf*)(match+best_len-1) != scan_end ||
+            *(ushf*)match != scan_start) continue;
+
+        /* It is not necessary to compare scan[2] and match[2] since they are
+         * always equal when the other bytes match, given that the hash keys
+         * are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
+         * strstart+3, +5, ... up to strstart+257. We check for insufficient
+         * lookahead only every 4th comparison; the 128th check will be made
+         * at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
+         * necessary to put more guard bytes at the end of the window, or
+         * to check more often for insufficient lookahead.
+         */
+        Assert(scan[2] == match[2], "scan[2]?");
+        scan++, match++;
+        do {
+        } while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 *(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
+                 scan < strend);
+        /* The funny "do {}" generates better code on most compilers */
+
+        /* Here, scan <= window+strstart+257 */
+        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+        if (*scan == *match) scan++;
+
+        len = (MAX_MATCH - 1) - (int)(strend-scan);
+        scan = strend - (MAX_MATCH-1);
+
+#else /* UNALIGNED_OK */
+
+        if (match[best_len]   != scan_end  ||
+            match[best_len-1] != scan_end1 ||
+            *match            != *scan     ||
+            *++match          != scan[1])      continue;
+
+        /* The check at best_len-1 can be removed because it will be made
+         * again later. (This heuristic is not always a win.)
+         * It is not necessary to compare scan[2] and match[2] since they
+         * are always equal when the other bytes match, given that
+         * the hash keys are equal and that HASH_BITS >= 8.
+         */
+        scan += 2, match++;
+        Assert(*scan == *match, "match[2]?");
+
+        /* We check for insufficient lookahead only every 8th comparison;
+         * the 256th check will be made at strstart+258.
+         */
+        do {
+        } while (*++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 *++scan == *++match && *++scan == *++match &&
+                 scan < strend);
+
+        Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+
+        len = MAX_MATCH - (int)(strend - scan);
+        scan = strend - MAX_MATCH;
+
+#endif /* UNALIGNED_OK */
+
+        if (len > best_len) {
+            s->match_start = cur_match;
+            best_len = len;
+            if (len >= nice_match) break;
+#ifdef UNALIGNED_OK
+            scan_end = *(ushf*)(scan+best_len-1);
+#else
+            scan_end1  = scan[best_len-1];
+            scan_end   = scan[best_len];
+#endif
+        }
+    } while ((cur_match = prev[cur_match & wmask]) > limit
+             && --chain_length != 0);
+
+    if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+    return s->lookahead;
+}
+
+#endif /* ASMV */

contrib/asm386/mkgvmt32.bat

@@ -0,0 +1 @@
+c:\masm611\bin\ml /coff /Zi /c /Flgvmat32.lst gvmat32.asm

contrib/asm386/zlibvc.def

@@ -0,0 +1,74 @@
+LIBRARY		"zlib"
+
+DESCRIPTION	'"""zlib data compression library"""'
+
+
+VERSION		1.11
+
+
+HEAPSIZE	1048576,8192
+
+EXPORTS
+    adler32                        @1
+    compress                       @2
+    crc32                          @3
+    deflate                        @4
+    deflateCopy                    @5
+    deflateEnd                     @6
+    deflateInit2_                  @7
+    deflateInit_                   @8
+    deflateParams                  @9
+    deflateReset                   @10
+    deflateSetDictionary           @11
+    gzclose                        @12
+    gzdopen                        @13
+    gzerror                        @14
+    gzflush                        @15
+    gzopen                         @16
+    gzread                         @17
+    gzwrite                        @18
+    inflate                        @19
+    inflateEnd                     @20
+    inflateInit2_                  @21
+    inflateInit_                   @22
+    inflateReset                   @23
+    inflateSetDictionary           @24
+    inflateSync                    @25
+    uncompress                     @26
+    zlibVersion                    @27
+    gzprintf                       @28
+    gzputc                         @29
+    gzgetc                         @30
+    gzseek                         @31
+    gzrewind                       @32
+    gztell                         @33
+    gzeof                          @34
+    gzsetparams                    @35
+    zError                         @36
+    inflateSyncPoint               @37
+    get_crc_table                  @38
+    compress2                      @39
+    gzputs                         @40
+    gzgets                         @41
+
+	unzOpen                       @61
+	unzClose                      @62
+	unzGetGlobalInfo              @63
+	unzGetCurrentFileInfo         @64
+	unzGoToFirstFile              @65
+	unzGoToNextFile               @66
+	unzOpenCurrentFile            @67
+	unzReadCurrentFile            @68
+	unztell                       @70
+	unzeof                        @71
+	unzCloseCurrentFile           @72
+	unzGetGlobalComment           @73
+	unzStringFileNameCompare      @74
+	unzLocateFile                 @75
+	unzGetLocalExtrafield         @76
+
+	zipOpen                       @80
+	zipOpenNewFileInZip           @81
+	zipWriteInFileInZip           @82
+	zipCloseFileInZip             @83
+	zipClose                      @84

contrib/asm386/zlibvc.dsp

@@ -0,0 +1,651 @@
+# Microsoft Developer Studio Project File - Name="zlibvc" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 5.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102
+# TARGTYPE "Win32 (ALPHA) Dynamic-Link Library" 0x0602
+
+CFG=zlibvc - Win32 Release
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "zlibvc.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "zlibvc.mak" CFG="zlibvc - Win32 Release"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "zlibvc - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlibvc - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlibvc - Win32 ReleaseAxp" (based on\
+ "Win32 (ALPHA) Dynamic-Link Library")
+!MESSAGE "zlibvc - Win32 ReleaseWithoutAsm" (based on\
+ "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlibvc - Win32 ReleaseWithoutCrtdll" (based on\
+ "Win32 (x86) Dynamic-Link Library")
+!MESSAGE 
+
+# Begin Project
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir ".\Release"
+# PROP BASE Intermediate_Dir ".\Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir ".\Release"
+# PROP Intermediate_Dir ".\Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /FD /c
+# SUBTRACT CPP /YX
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "NDEBUG"
+# ADD RSC /l 0x40c /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /machine:I386
+# ADD LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
+# SUBTRACT LINK32 /pdb:none
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir ".\Debug"
+# PROP BASE Intermediate_Dir ".\Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir ".\Debug"
+# PROP Intermediate_Dir ".\Debug"
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /YX /c
+# ADD CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /FD /c
+# SUBTRACT CPP /YX
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "_DEBUG" /win32
+# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "_DEBUG"
+# ADD RSC /l 0x40c /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /debug /machine:I386
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /debug /machine:I386 /out:".\Debug\zlib.dll"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlibvc__"
+# PROP BASE Intermediate_Dir "zlibvc__"
+# PROP BASE Ignore_Export_Lib 0
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "zlibvc__"
+# PROP Intermediate_Dir "zlibvc__"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+CPP=cl.exe
+# ADD BASE CPP /nologo /MT /Gt0 /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /YX /FD /c
+# ADD CPP /nologo /MT /Gt0 /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /FD /c
+# SUBTRACT CPP /YX
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "NDEBUG"
+# ADD RSC /l 0x40c /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 crtdll.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /map /machine:ALPHA /nodefaultlib /out:".\Release\zlib.dll"
+# SUBTRACT BASE LINK32 /pdb:none
+# ADD LINK32 crtdll.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /map /machine:ALPHA /nodefaultlib /out:"zlibvc__\zlib.dll"
+# SUBTRACT LINK32 /pdb:none
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlibvc_0"
+# PROP BASE Intermediate_Dir "zlibvc_0"
+# PROP BASE Ignore_Export_Lib 0
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "zlibvc_0"
+# PROP Intermediate_Dir "zlibvc_0"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /YX /FD /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /FD /c
+# SUBTRACT CPP /YX
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "NDEBUG"
+# ADD RSC /l 0x40c /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
+# SUBTRACT BASE LINK32 /pdb:none
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\zlibvc_0\zlib.dll"
+# SUBTRACT LINK32 /pdb:none
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlibvc_1"
+# PROP BASE Intermediate_Dir "zlibvc_1"
+# PROP BASE Ignore_Export_Lib 0
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "zlibvc_1"
+# PROP Intermediate_Dir "zlibvc_1"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /YX /FD /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /FD /c
+# SUBTRACT CPP /YX
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "NDEBUG"
+# ADD RSC /l 0x40c /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
+# SUBTRACT BASE LINK32 /pdb:none
+# ADD LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\zlibvc_1\zlib.dll"
+# SUBTRACT LINK32 /pdb:none
+
+!ENDIF 
+
+# Begin Target
+
+# Name "zlibvc - Win32 Release"
+# Name "zlibvc - Win32 Debug"
+# Name "zlibvc - Win32 ReleaseAxp"
+# Name "zlibvc - Win32 ReleaseWithoutAsm"
+# Name "zlibvc - Win32 ReleaseWithoutCrtdll"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;hpj;bat;for;f90"
+# Begin Source File
+
+SOURCE=.\adler32.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_ADLER=\
+	".\zconf.h"\
+	".\zlib.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\compress.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_COMPR=\
+	".\zconf.h"\
+	".\zlib.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\crc32.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_CRC32=\
+	".\zconf.h"\
+	".\zlib.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\deflate.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_DEFLA=\
+	".\deflate.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\gvmat32c.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\gzio.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_GZIO_=\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\infblock.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFBL=\
+	".\infblock.h"\
+	".\infcodes.h"\
+	".\inftrees.h"\
+	".\infutil.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\infcodes.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFCO=\
+	".\infblock.h"\
+	".\infcodes.h"\
+	".\inffast.h"\
+	".\inftrees.h"\
+	".\infutil.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\inffast.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFFA=\
+	".\infblock.h"\
+	".\infcodes.h"\
+	".\inffast.h"\
+	".\inftrees.h"\
+	".\infutil.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\inflate.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFLA=\
+	".\infblock.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\inftrees.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFTR=\
+	".\inftrees.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\infutil.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFUT=\
+	".\infblock.h"\
+	".\infcodes.h"\
+	".\inftrees.h"\
+	".\infutil.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\trees.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_TREES=\
+	".\deflate.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\uncompr.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_UNCOM=\
+	".\zconf.h"\
+	".\zlib.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\unzip.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\zip.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\zlib.rc
+# End Source File
+# Begin Source File
+
+SOURCE=.\zlibvc.def
+# End Source File
+# Begin Source File
+
+SOURCE=.\zutil.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_ZUTIL=\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd"
+# Begin Source File
+
+SOURCE=.\deflate.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\infblock.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\infcodes.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\inffast.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\inftrees.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\infutil.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\zconf.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\zlib.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\zutil.h
+# End Source File
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project

contrib/asm386/zlibvc.dsw

@@ -0,0 +1,41 @@
+Microsoft Developer Studio Workspace File, Format Version 5.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "zlibstat"=.\zlibstat.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Project: "zlibvc"=.\zlibvc.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

contrib/asm586/README.586

@@ -0,0 +1,43 @@
+This is a patched version of zlib modified to use
+Pentium-optimized assembly code in the deflation algorithm. The files
+changed/added by this patch are:
+
+README.586
+match.S
+
+The effectiveness of these modifications is a bit marginal, as the the
+program's bottleneck seems to be mostly L1-cache contention, for which
+there is no real way to work around without rewriting the basic
+algorithm. The speedup on average is around 5-10% (which is generally
+less than the amount of variance between subsequent executions).
+However, when used at level 9 compression, the cache contention can
+drop enough for the assembly version to achieve 10-20% speedup (and
+sometimes more, depending on the amount of overall redundancy in the
+files). Even here, though, cache contention can still be the limiting
+factor, depending on the nature of the program using the zlib library.
+This may also mean that better improvements will be seen on a Pentium
+with MMX, which suffers much less from L1-cache contention, but I have
+not yet verified this.
+
+Note that this code has been tailored for the Pentium in particular,
+and will not perform well on the Pentium Pro (due to the use of a
+partial register in the inner loop).
+
+If you are using an assembler other than GNU as, you will have to
+translate match.S to use your assembler's syntax. (Have fun.)
+
+Brian Raiter
+breadbox@muppetlabs.com
+April, 1998
+
+
+Added for zlib 1.1.3:
+
+The patches come from
+http://www.muppetlabs.com/~breadbox/software/assembly.html
+
+To compile zlib with this asm file, copy match.S to the zlib directory
+then do:
+
+CFLAGS="-O3 -DASMV" ./configure
+make OBJA=match.o

contrib/asm586/match.S

@@ -0,0 +1,354 @@
+/* match.s -- Pentium-optimized version of longest_match()
+ * Written for zlib 1.1.2
+ * Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License.
+ */
+
+#ifndef NO_UNDERLINE
+#define	match_init	_match_init
+#define	longest_match	_longest_match
+#endif
+
+#define	MAX_MATCH	(258)
+#define	MIN_MATCH	(3)
+#define	MIN_LOOKAHEAD	(MAX_MATCH + MIN_MATCH + 1)
+#define	MAX_MATCH_8	((MAX_MATCH + 7) & ~7)
+
+/* stack frame offsets */
+
+#define	wmask			0	/* local copy of s->wmask	*/
+#define	window			4	/* local copy of s->window	*/
+#define	windowbestlen		8	/* s->window + bestlen		*/
+#define	chainlenscanend		12	/* high word: current chain len	*/
+					/* low word: last bytes sought	*/
+#define	scanstart		16	/* first two bytes of string	*/
+#define	scanalign		20	/* dword-misalignment of string	*/
+#define	nicematch		24	/* a good enough match size	*/
+#define	bestlen			28	/* size of best match so far	*/
+#define	scan			32	/* ptr to string wanting match	*/
+
+#define	LocalVarsSize		(36)
+/*	saved ebx		36 */
+/*	saved edi		40 */
+/*	saved esi		44 */
+/*	saved ebp		48 */
+/*	return address		52 */
+#define	deflatestate		56	/* the function arguments	*/
+#define	curmatch		60
+
+/* Offsets for fields in the deflate_state structure. These numbers
+ * are calculated from the definition of deflate_state, with the
+ * assumption that the compiler will dword-align the fields. (Thus,
+ * changing the definition of deflate_state could easily cause this
+ * program to crash horribly, without so much as a warning at
+ * compile time. Sigh.)
+ */
+#define	dsWSize			36
+#define	dsWMask			44
+#define	dsWindow		48
+#define	dsPrev			56
+#define	dsMatchLen		88
+#define	dsPrevMatch		92
+#define	dsStrStart		100
+#define	dsMatchStart		104
+#define	dsLookahead		108
+#define	dsPrevLen		112
+#define	dsMaxChainLen		116
+#define	dsGoodMatch		132
+#define	dsNiceMatch		136
+
+
+.file "match.S"
+
+.globl	match_init, longest_match
+
+.text
+
+/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
+
+longest_match:
+
+/* Save registers that the compiler may be using, and adjust %esp to	*/
+/* make room for our stack frame.					*/
+
+		pushl	%ebp
+		pushl	%edi
+		pushl	%esi
+		pushl	%ebx
+		subl	$LocalVarsSize, %esp
+
+/* Retrieve the function arguments. %ecx will hold cur_match		*/
+/* throughout the entire function. %edx will hold the pointer to the	*/
+/* deflate_state structure during the function's setup (before		*/
+/* entering the main loop).						*/
+
+		movl	deflatestate(%esp), %edx
+		movl	curmatch(%esp), %ecx
+
+/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;	*/
+
+		movl	dsNiceMatch(%edx), %eax
+		movl	dsLookahead(%edx), %ebx
+		cmpl	%eax, %ebx
+		jl	LookaheadLess
+		movl	%eax, %ebx
+LookaheadLess:	movl	%ebx, nicematch(%esp)
+
+/* register Bytef *scan = s->window + s->strstart;			*/
+
+		movl	dsWindow(%edx), %esi
+		movl	%esi, window(%esp)
+		movl	dsStrStart(%edx), %ebp
+		lea	(%esi,%ebp), %edi
+		movl	%edi, scan(%esp)
+
+/* Determine how many bytes the scan ptr is off from being		*/
+/* dword-aligned.							*/
+
+		movl	%edi, %eax
+		negl	%eax
+		andl	$3, %eax
+		movl	%eax, scanalign(%esp)
+
+/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ?			*/
+/*     s->strstart - (IPos)MAX_DIST(s) : NIL;				*/
+
+		movl	dsWSize(%edx), %eax
+		subl	$MIN_LOOKAHEAD, %eax
+		subl	%eax, %ebp
+		jg	LimitPositive
+		xorl	%ebp, %ebp
+LimitPositive:
+
+/* unsigned chain_length = s->max_chain_length;				*/
+/* if (s->prev_length >= s->good_match) {				*/
+/*     chain_length >>= 2;						*/
+/* }									*/
+
+		movl	dsPrevLen(%edx), %eax
+		movl	dsGoodMatch(%edx), %ebx
+		cmpl	%ebx, %eax
+		movl	dsMaxChainLen(%edx), %ebx
+		jl	LastMatchGood
+		shrl	$2, %ebx
+LastMatchGood:
+
+/* chainlen is decremented once beforehand so that the function can	*/
+/* use the sign flag instead of the zero flag for the exit test.	*/
+/* It is then shifted into the high word, to make room for the scanend	*/
+/* scanend value, which it will always accompany.			*/
+
+		decl	%ebx
+		shll	$16, %ebx
+
+/* int best_len = s->prev_length;					*/
+
+		movl	dsPrevLen(%edx), %eax
+		movl	%eax, bestlen(%esp)
+
+/* Store the sum of s->window + best_len in %esi locally, and in %esi.	*/
+
+		addl	%eax, %esi
+		movl	%esi, windowbestlen(%esp)
+
+/* register ush scan_start = *(ushf*)scan;				*/
+/* register ush scan_end   = *(ushf*)(scan+best_len-1);			*/
+
+		movw	(%edi), %bx
+		movw	%bx, scanstart(%esp)
+		movw	-1(%edi,%eax), %bx
+		movl	%ebx, chainlenscanend(%esp)
+
+/* Posf *prev = s->prev;						*/
+/* uInt wmask = s->w_mask;						*/
+
+		movl	dsPrev(%edx), %edi
+		movl	dsWMask(%edx), %edx
+		mov	%edx, wmask(%esp)
+
+/* Jump into the main loop.						*/
+
+		jmp	LoopEntry
+
+.balign 16
+
+/* do {
+ *     match = s->window + cur_match;
+ *     if (*(ushf*)(match+best_len-1) != scan_end ||
+ *         *(ushf*)match != scan_start) continue;
+ *     [...]
+ * } while ((cur_match = prev[cur_match & wmask]) > limit
+ *          && --chain_length != 0);
+ *
+ * Here is the inner loop of the function. The function will spend the
+ * majority of its time in this loop, and majority of that time will
+ * be spent in the first ten instructions.
+ *
+ * Within this loop:
+ * %ebx = chainlenscanend - i.e., ((chainlen << 16) | scanend)
+ * %ecx = curmatch
+ * %edx = curmatch & wmask
+ * %esi = windowbestlen - i.e., (window + bestlen)
+ * %edi = prev
+ * %ebp = limit
+ *
+ * Two optimization notes on the choice of instructions:
+ *
+ * The first instruction uses a 16-bit address, which costs an extra,
+ * unpairable cycle. This is cheaper than doing a 32-bit access and
+ * zeroing the high word, due to the 3-cycle misalignment penalty which
+ * would occur half the time. This also turns out to be cheaper than
+ * doing two separate 8-bit accesses, as the memory is so rarely in the
+ * L1 cache.
+ *
+ * The window buffer, however, apparently spends a lot of time in the
+ * cache, and so it is faster to retrieve the word at the end of the
+ * match string with two 8-bit loads. The instructions that test the
+ * word at the beginning of the match string, however, are executed
+ * much less frequently, and there it was cheaper to use 16-bit
+ * instructions, which avoided the necessity of saving off and
+ * subsequently reloading one of the other registers.
+ */
+LookupLoop:
+							/* 1 U & V  */
+		movw	(%edi,%edx,2), %cx		/* 2 U pipe */
+		movl	wmask(%esp), %edx		/* 2 V pipe */
+		cmpl	%ebp, %ecx			/* 3 U pipe */
+		jbe	LeaveNow			/* 3 V pipe */
+		subl	$0x00010000, %ebx		/* 4 U pipe */
+		js	LeaveNow			/* 4 V pipe */
+LoopEntry:	movb	-1(%esi,%ecx), %al		/* 5 U pipe */
+		andl	%ecx, %edx			/* 5 V pipe */
+		cmpb	%bl, %al			/* 6 U pipe */
+		jnz	LookupLoop			/* 6 V pipe */
+		movb	(%esi,%ecx), %ah
+		cmpb	%bh, %ah
+		jnz	LookupLoop
+		movl	window(%esp), %eax
+		movw	(%eax,%ecx), %ax
+		cmpw	scanstart(%esp), %ax
+		jnz	LookupLoop
+
+/* Store the current value of chainlen.					*/
+
+		movl	%ebx, chainlenscanend(%esp)
+
+/* Point %edi to the string under scrutiny, and %esi to the string we	*/
+/* are hoping to match it up with. In actuality, %esi and %edi are	*/
+/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is	*/
+/* initialized to -(MAX_MATCH_8 - scanalign).				*/
+
+		movl	window(%esp), %esi
+		movl	scan(%esp), %edi
+		addl	%ecx, %esi
+		movl	scanalign(%esp), %eax
+		movl	$(-MAX_MATCH_8), %edx
+		lea	MAX_MATCH_8(%edi,%eax), %edi
+		lea	MAX_MATCH_8(%esi,%eax), %esi
+
+/* Test the strings for equality, 8 bytes at a time. At the end,
+ * adjust %edx so that it is offset to the exact byte that mismatched.
+ *
+ * We already know at this point that the first three bytes of the
+ * strings match each other, and they can be safely passed over before
+ * starting the compare loop. So what this code does is skip over 0-3
+ * bytes, as much as necessary in order to dword-align the %edi
+ * pointer. (%esi will still be misaligned three times out of four.)
+ *
+ * It should be confessed that this loop usually does not represent
+ * much of the total running time. Replacing it with a more
+ * straightforward "rep cmpsb" would not drastically degrade
+ * performance.
+ */
+LoopCmps:
+		movl	(%esi,%edx), %eax
+		movl	(%edi,%edx), %ebx
+		xorl	%ebx, %eax
+		jnz	LeaveLoopCmps
+		movl	4(%esi,%edx), %eax
+		movl	4(%edi,%edx), %ebx
+		xorl	%ebx, %eax
+		jnz	LeaveLoopCmps4
+		addl	$8, %edx
+		jnz	LoopCmps
+		jmp	LenMaximum
+LeaveLoopCmps4:	addl	$4, %edx
+LeaveLoopCmps:	testl	$0x0000FFFF, %eax
+		jnz	LenLower
+		addl	$2, %edx
+		shrl	$16, %eax
+LenLower:	subb	$1, %al
+		adcl	$0, %edx
+
+/* Calculate the length of the match. If it is longer than MAX_MATCH,	*/
+/* then automatically accept it as the best possible match and leave.	*/
+
+		lea	(%edi,%edx), %eax
+		movl	scan(%esp), %edi
+		subl	%edi, %eax
+		cmpl	$MAX_MATCH, %eax
+		jge	LenMaximum
+
+/* If the length of the match is not longer than the best match we	*/
+/* have so far, then forget it and return to the lookup loop.		*/
+
+		movl	deflatestate(%esp), %edx
+		movl	bestlen(%esp), %ebx
+		cmpl	%ebx, %eax
+		jg	LongerMatch
+		movl	chainlenscanend(%esp), %ebx
+		movl	windowbestlen(%esp), %esi
+		movl	dsPrev(%edx), %edi
+		movl	wmask(%esp), %edx
+		andl	%ecx, %edx
+		jmp	LookupLoop
+
+/*         s->match_start = cur_match;					*/
+/*         best_len = len;						*/
+/*         if (len >= nice_match) break;				*/
+/*         scan_end = *(ushf*)(scan+best_len-1);			*/
+
+LongerMatch:	movl	nicematch(%esp), %ebx
+		movl	%eax, bestlen(%esp)
+		movl	%ecx, dsMatchStart(%edx)
+		cmpl	%ebx, %eax
+		jge	LeaveNow
+		movl	window(%esp), %esi
+		addl	%eax, %esi
+		movl	%esi, windowbestlen(%esp)
+		movl	chainlenscanend(%esp), %ebx
+		movw	-1(%edi,%eax), %bx
+		movl	dsPrev(%edx), %edi
+		movl	%ebx, chainlenscanend(%esp)
+		movl	wmask(%esp), %edx
+		andl	%ecx, %edx
+		jmp	LookupLoop
+
+/* Accept the current string, with the maximum possible length.		*/
+
+LenMaximum:	movl	deflatestate(%esp), %edx
+		movl	$MAX_MATCH, bestlen(%esp)
+		movl	%ecx, dsMatchStart(%edx)
+
+/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len;		*/
+/* return s->lookahead;							*/
+
+LeaveNow:
+		movl	deflatestate(%esp), %edx
+		movl	bestlen(%esp), %ebx
+		movl	dsLookahead(%edx), %eax
+		cmpl	%eax, %ebx
+		jg	LookaheadRet
+		movl	%ebx, %eax
+LookaheadRet:
+
+/* Restore the stack and return from whence we came.			*/
+
+		addl	$LocalVarsSize, %esp
+		popl	%ebx
+		popl	%esi
+		popl	%edi
+		popl	%ebp
+match_init:	ret

contrib/asm686/README.686

@@ -0,0 +1,34 @@
+This is a patched version of zlib, modified to use
+Pentium-Pro-optimized assembly code in the deflation algorithm. The
+files changed/added by this patch are:
+
+README.686
+match.S
+
+The speedup that this patch provides varies, depending on whether the
+compiler used to build the original version of zlib falls afoul of the
+PPro's speed traps. My own tests show a speedup of around 10-20% at
+the default compression level, and 20-30% using -9, against a version
+compiled using gcc 2.7.2.3. Your mileage may vary.
+
+Note that this code has been tailored for the PPro/PII in particular,
+and will not perform particuarly well on a Pentium.
+
+If you are using an assembler other than GNU as, you will have to
+translate match.S to use your assembler's syntax. (Have fun.)
+
+Brian Raiter
+breadbox@muppetlabs.com
+April, 1998
+
+
+Added for zlib 1.1.3:
+
+The patches come from
+http://www.muppetlabs.com/~breadbox/software/assembly.html
+
+To compile zlib with this asm file, copy match.S to the zlib directory
+then do:
+
+CFLAGS="-O3 -DASMV" ./configure
+make OBJA=match.o

contrib/asm686/match.S

@@ -0,0 +1,327 @@
+/* match.s -- Pentium-Pro-optimized version of longest_match()
+ * Written for zlib 1.1.2
+ * Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License.
+ */
+
+#ifndef NO_UNDERLINE
+#define	match_init	_match_init
+#define	longest_match	_longest_match
+#endif
+
+#define	MAX_MATCH	(258)
+#define	MIN_MATCH	(3)
+#define	MIN_LOOKAHEAD	(MAX_MATCH + MIN_MATCH + 1)
+#define	MAX_MATCH_8	((MAX_MATCH + 7) & ~7)
+
+/* stack frame offsets */
+
+#define	chainlenwmask		0	/* high word: current chain len	*/
+					/* low word: s->wmask		*/
+#define	window			4	/* local copy of s->window	*/
+#define	windowbestlen		8	/* s->window + bestlen		*/
+#define	scanstart		16	/* first two bytes of string	*/
+#define	scanend			12	/* last two bytes of string	*/
+#define	scanalign		20	/* dword-misalignment of string	*/
+#define	nicematch		24	/* a good enough match size	*/
+#define	bestlen			28	/* size of best match so far	*/
+#define	scan			32	/* ptr to string wanting match	*/
+
+#define	LocalVarsSize		(36)
+/*	saved ebx		36 */
+/*	saved edi		40 */
+/*	saved esi		44 */
+/*	saved ebp		48 */
+/*	return address		52 */
+#define	deflatestate		56	/* the function arguments	*/
+#define	curmatch		60
+
+/* Offsets for fields in the deflate_state structure. These numbers
+ * are calculated from the definition of deflate_state, with the
+ * assumption that the compiler will dword-align the fields. (Thus,
+ * changing the definition of deflate_state could easily cause this
+ * program to crash horribly, without so much as a warning at
+ * compile time. Sigh.)
+ */
+#define	dsWSize			36
+#define	dsWMask			44
+#define	dsWindow		48
+#define	dsPrev			56
+#define	dsMatchLen		88
+#define	dsPrevMatch		92
+#define	dsStrStart		100
+#define	dsMatchStart		104
+#define	dsLookahead		108
+#define	dsPrevLen		112
+#define	dsMaxChainLen		116
+#define	dsGoodMatch		132
+#define	dsNiceMatch		136
+
+
+.file "match.S"
+
+.globl	match_init, longest_match
+
+.text
+
+/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
+
+longest_match:
+
+/* Save registers that the compiler may be using, and adjust %esp to	*/
+/* make room for our stack frame.					*/
+
+		pushl	%ebp
+		pushl	%edi
+		pushl	%esi
+		pushl	%ebx
+		subl	$LocalVarsSize, %esp
+
+/* Retrieve the function arguments. %ecx will hold cur_match		*/
+/* throughout the entire function. %edx will hold the pointer to the	*/
+/* deflate_state structure during the function's setup (before		*/
+/* entering the main loop).						*/
+
+		movl	deflatestate(%esp), %edx
+		movl	curmatch(%esp), %ecx
+
+/* uInt wmask = s->w_mask;						*/
+/* unsigned chain_length = s->max_chain_length;				*/
+/* if (s->prev_length >= s->good_match) {				*/
+/*     chain_length >>= 2;						*/
+/* }									*/
+
+		movl	dsPrevLen(%edx), %eax
+		movl	dsGoodMatch(%edx), %ebx
+		cmpl	%ebx, %eax
+		movl	dsWMask(%edx), %eax
+		movl	dsMaxChainLen(%edx), %ebx
+		jl	LastMatchGood
+		shrl	$2, %ebx
+LastMatchGood:
+
+/* chainlen is decremented once beforehand so that the function can	*/
+/* use the sign flag instead of the zero flag for the exit test.	*/
+/* It is then shifted into the high word, to make room for the wmask	*/
+/* value, which it will always accompany.				*/
+
+		decl	%ebx
+		shll	$16, %ebx
+		orl	%eax, %ebx
+		movl	%ebx, chainlenwmask(%esp)
+
+/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;	*/
+
+		movl	dsNiceMatch(%edx), %eax
+		movl	dsLookahead(%edx), %ebx
+		cmpl	%eax, %ebx
+		jl	LookaheadLess
+		movl	%eax, %ebx
+LookaheadLess:	movl	%ebx, nicematch(%esp)
+
+/* register Bytef *scan = s->window + s->strstart;			*/
+
+		movl	dsWindow(%edx), %esi
+		movl	%esi, window(%esp)
+		movl	dsStrStart(%edx), %ebp
+		lea	(%esi,%ebp), %edi
+		movl	%edi, scan(%esp)
+
+/* Determine how many bytes the scan ptr is off from being		*/
+/* dword-aligned.							*/
+
+		movl	%edi, %eax
+		negl	%eax
+		andl	$3, %eax
+		movl	%eax, scanalign(%esp)
+
+/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ?			*/
+/*     s->strstart - (IPos)MAX_DIST(s) : NIL;				*/
+
+		movl	dsWSize(%edx), %eax
+		subl	$MIN_LOOKAHEAD, %eax
+		subl	%eax, %ebp
+		jg	LimitPositive
+		xorl	%ebp, %ebp
+LimitPositive:
+
+/* int best_len = s->prev_length;					*/
+
+		movl	dsPrevLen(%edx), %eax
+		movl	%eax, bestlen(%esp)
+
+/* Store the sum of s->window + best_len in %esi locally, and in %esi.	*/
+
+		addl	%eax, %esi
+		movl	%esi, windowbestlen(%esp)
+
+/* register ush scan_start = *(ushf*)scan;				*/
+/* register ush scan_end   = *(ushf*)(scan+best_len-1);			*/
+/* Posf *prev = s->prev;						*/
+
+		movzwl	(%edi), %ebx
+		movl	%ebx, scanstart(%esp)
+		movzwl	-1(%edi,%eax), %ebx
+		movl	%ebx, scanend(%esp)
+		movl	dsPrev(%edx), %edi
+
+/* Jump into the main loop.						*/
+
+		movl	chainlenwmask(%esp), %edx
+		jmp	LoopEntry
+
+.balign 16
+
+/* do {
+ *     match = s->window + cur_match;
+ *     if (*(ushf*)(match+best_len-1) != scan_end ||
+ *         *(ushf*)match != scan_start) continue;
+ *     [...]
+ * } while ((cur_match = prev[cur_match & wmask]) > limit
+ *          && --chain_length != 0);
+ *
+ * Here is the inner loop of the function. The function will spend the
+ * majority of its time in this loop, and majority of that time will
+ * be spent in the first ten instructions.
+ *
+ * Within this loop:
+ * %ebx = scanend
+ * %ecx = curmatch
+ * %edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
+ * %esi = windowbestlen - i.e., (window + bestlen)
+ * %edi = prev
+ * %ebp = limit
+ */
+LookupLoop:
+		andl	%edx, %ecx
+		movzwl	(%edi,%ecx,2), %ecx
+		cmpl	%ebp, %ecx
+		jbe	LeaveNow
+		subl	$0x00010000, %edx
+		js	LeaveNow
+LoopEntry:	movzwl	-1(%esi,%ecx), %eax
+		cmpl	%ebx, %eax
+		jnz	LookupLoop
+		movl	window(%esp), %eax
+		movzwl	(%eax,%ecx), %eax
+		cmpl	scanstart(%esp), %eax
+		jnz	LookupLoop
+
+/* Store the current value of chainlen.					*/
+
+		movl	%edx, chainlenwmask(%esp)
+
+/* Point %edi to the string under scrutiny, and %esi to the string we	*/
+/* are hoping to match it up with. In actuality, %esi and %edi are	*/
+/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is	*/
+/* initialized to -(MAX_MATCH_8 - scanalign).				*/
+
+		movl	window(%esp), %esi
+		movl	scan(%esp), %edi
+		addl	%ecx, %esi
+		movl	scanalign(%esp), %eax
+		movl	$(-MAX_MATCH_8), %edx
+		lea	MAX_MATCH_8(%edi,%eax), %edi
+		lea	MAX_MATCH_8(%esi,%eax), %esi
+
+/* Test the strings for equality, 8 bytes at a time. At the end,
+ * adjust %edx so that it is offset to the exact byte that mismatched.
+ *
+ * We already know at this point that the first three bytes of the
+ * strings match each other, and they can be safely passed over before
+ * starting the compare loop. So what this code does is skip over 0-3
+ * bytes, as much as necessary in order to dword-align the %edi
+ * pointer. (%esi will still be misaligned three times out of four.)
+ *
+ * It should be confessed that this loop usually does not represent
+ * much of the total running time. Replacing it with a more
+ * straightforward "rep cmpsb" would not drastically degrade
+ * performance.
+ */
+LoopCmps:
+		movl	(%esi,%edx), %eax
+		xorl	(%edi,%edx), %eax
+		jnz	LeaveLoopCmps
+		movl	4(%esi,%edx), %eax
+		xorl	4(%edi,%edx), %eax
+		jnz	LeaveLoopCmps4
+		addl	$8, %edx
+		jnz	LoopCmps
+		jmp	LenMaximum
+LeaveLoopCmps4:	addl	$4, %edx
+LeaveLoopCmps:	testl	$0x0000FFFF, %eax
+		jnz	LenLower
+		addl	$2, %edx
+		shrl	$16, %eax
+LenLower:	subb	$1, %al
+		adcl	$0, %edx
+
+/* Calculate the length of the match. If it is longer than MAX_MATCH,	*/
+/* then automatically accept it as the best possible match and leave.	*/
+
+		lea	(%edi,%edx), %eax
+		movl	scan(%esp), %edi
+		subl	%edi, %eax
+		cmpl	$MAX_MATCH, %eax
+		jge	LenMaximum
+
+/* If the length of the match is not longer than the best match we	*/
+/* have so far, then forget it and return to the lookup loop.		*/
+
+		movl	deflatestate(%esp), %edx
+		movl	bestlen(%esp), %ebx
+		cmpl	%ebx, %eax
+		jg	LongerMatch
+		movl	windowbestlen(%esp), %esi
+		movl	dsPrev(%edx), %edi
+		movl	scanend(%esp), %ebx
+		movl	chainlenwmask(%esp), %edx
+		jmp	LookupLoop
+
+/*         s->match_start = cur_match;					*/
+/*         best_len = len;						*/
+/*         if (len >= nice_match) break;				*/
+/*         scan_end = *(ushf*)(scan+best_len-1);			*/
+
+LongerMatch:	movl	nicematch(%esp), %ebx
+		movl	%eax, bestlen(%esp)
+		movl	%ecx, dsMatchStart(%edx)
+		cmpl	%ebx, %eax
+		jge	LeaveNow
+		movl	window(%esp), %esi
+		addl	%eax, %esi
+		movl	%esi, windowbestlen(%esp)
+		movzwl	-1(%edi,%eax), %ebx
+		movl	dsPrev(%edx), %edi
+		movl	%ebx, scanend(%esp)
+		movl	chainlenwmask(%esp), %edx
+		jmp	LookupLoop
+
+/* Accept the current string, with the maximum possible length.		*/
+
+LenMaximum:	movl	deflatestate(%esp), %edx
+		movl	$MAX_MATCH, bestlen(%esp)
+		movl	%ecx, dsMatchStart(%edx)
+
+/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len;		*/
+/* return s->lookahead;							*/
+
+LeaveNow:
+		movl	deflatestate(%esp), %edx
+		movl	bestlen(%esp), %ebx
+		movl	dsLookahead(%edx), %eax
+		cmpl	%eax, %ebx
+		jg	LookaheadRet
+		movl	%ebx, %eax
+LookaheadRet:
+
+/* Restore the stack and return from whence we came.			*/
+
+		addl	$LocalVarsSize, %esp
+		popl	%ebx
+		popl	%esi
+		popl	%edi
+		popl	%ebp
+match_init:	ret

contrib/delphi/zlib.mak

@@ -0,0 +1,36 @@
+# Makefile for zlib32bd.lib
+# ------------- Borland C++ 4.5 -------------
+
+# The (32-bit) zlib32bd.lib made with this makefile is intended for use 
+# in making the (32-bit) DLL, png32bd.dll. It uses the "stdcall" calling 
+# convention.
+
+CFLAGS= -ps -O2 -C -K -N- -k- -d -3 -r- -w-par -w-aus -WDE
+CC=f:\bc45\bin\bcc32
+LIBFLAGS= /C
+LIB=f:\bc45\bin\tlib
+ZLIB=zlib32bd.lib
+
+.autodepend
+.c.obj:
+        $(CC) -c $(CFLAGS) $<
+
+OBJ1=adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infblock.obj 
+OBJ2=infcodes.obj inflate.obj inftrees.obj infutil.obj inffast.obj 
+OBJ3=trees.obj uncompr.obj zutil.obj
+pOBJ1=+adler32.obj+compress.obj+crc32.obj+deflate.obj+gzio.obj+infblock.obj 
+pOBJ2=+infcodes.obj+inflate.obj+inftrees.obj+infutil.obj+inffast.obj 
+pOBJ3=+trees.obj+uncompr.obj+zutil.obj
+
+all: $(ZLIB)
+
+$(ZLIB): $(OBJ1) $(OBJ2) $(OBJ3)
+        @if exist $@ del $@
+        $(LIB) @&&|
+$@ $(LIBFLAGS) &
+$(pOBJ1) &
+$(pOBJ2) &
+$(pOBJ3)
+|
+
+# End of makefile for zlib32bd.lib

contrib/delphi/zlibdef.pas

@@ -0,0 +1,169 @@
+unit zlibdef;
+
+interface
+
+uses
+  Windows;
+
+const
+  ZLIB_VERSION = '1.1.3';
+
+type
+  voidpf = Pointer;
+  int    = Integer;
+  uInt   = Cardinal;
+  pBytef = PChar;
+  uLong  = Cardinal;
+
+  alloc_func = function(opaque: voidpf; items, size: uInt): voidpf;
+                    stdcall;
+  free_func  = procedure(opaque, address: voidpf);
+                    stdcall;
+
+  internal_state = Pointer;
+
+  z_streamp = ^z_stream;
+  z_stream = packed record
+    next_in: pBytef;          // next input byte
+    avail_in: uInt;           // number of bytes available at next_in
+    total_in: uLong;          // total nb of input bytes read so far
+
+    next_out: pBytef;         // next output byte should be put there
+    avail_out: uInt;          // remaining free space at next_out
+    total_out: uLong;         // total nb of bytes output so far
+
+    msg: PChar;               // last error message, NULL if no error
+    state: internal_state;    // not visible by applications
+
+    zalloc: alloc_func;       // used to allocate the internal state
+    zfree: free_func;         // used to free the internal state
+    opaque: voidpf;           // private data object passed to zalloc and zfree
+
+    data_type: int;           // best guess about the data type: ascii or binary
+    adler: uLong;             // adler32 value of the uncompressed data
+    reserved: uLong;          // reserved for future use
+    end;
+
+const
+  Z_NO_FLUSH      = 0;
+  Z_SYNC_FLUSH    = 2;
+  Z_FULL_FLUSH    = 3;
+  Z_FINISH        = 4;
+
+  Z_OK            = 0;
+  Z_STREAM_END    = 1;
+
+  Z_NO_COMPRESSION         =  0;
+  Z_BEST_SPEED             =  1;
+  Z_BEST_COMPRESSION       =  9;
+  Z_DEFAULT_COMPRESSION    = -1;
+
+  Z_FILTERED            = 1;
+  Z_HUFFMAN_ONLY        = 2;
+  Z_DEFAULT_STRATEGY    = 0;
+
+  Z_BINARY   = 0;
+  Z_ASCII    = 1;
+  Z_UNKNOWN  = 2;
+
+  Z_DEFLATED    = 8;
+
+  MAX_MEM_LEVEL = 9;
+
+function adler32(adler: uLong; const buf: pBytef; len: uInt): uLong;
+             stdcall;
+function crc32(crc: uLong; const buf: pBytef; len: uInt): uLong;
+             stdcall;
+function deflate(strm: z_streamp; flush: int): int;
+             stdcall;
+function deflateCopy(dest, source: z_streamp): int;
+             stdcall;
+function deflateEnd(strm: z_streamp): int;
+             stdcall;
+function deflateInit2_(strm: z_streamp; level, method,
+                       windowBits, memLevel, strategy: int;
+                       const version: PChar; stream_size: int): int;
+             stdcall;
+function deflateInit_(strm: z_streamp; level: int;
+                      const version: PChar; stream_size: int): int;
+             stdcall;
+function deflateParams(strm: z_streamp; level, strategy: int): int;
+             stdcall;
+function deflateReset(strm: z_streamp): int;
+             stdcall;
+function deflateSetDictionary(strm: z_streamp;
+                              const dictionary: pBytef;
+                              dictLength: uInt): int;
+             stdcall;
+function inflate(strm: z_streamp; flush: int): int;
+             stdcall;
+function inflateEnd(strm: z_streamp): int;
+             stdcall;
+function inflateInit2_(strm: z_streamp; windowBits: int;
+                       const version: PChar; stream_size: int): int;
+             stdcall;
+function inflateInit_(strm: z_streamp; const version: PChar;
+                      stream_size: int): int;
+             stdcall;
+function inflateReset(strm: z_streamp): int;
+             stdcall;
+function inflateSetDictionary(strm: z_streamp;
+                              const dictionary: pBytef;
+                              dictLength: uInt): int;
+             stdcall;
+function inflateSync(strm: z_streamp): int;
+             stdcall;
+
+function deflateInit(strm: z_streamp; level: int): int;
+function deflateInit2(strm: z_streamp; level, method, windowBits,
+                      memLevel, strategy: int): int;
+function inflateInit(strm: z_streamp): int;
+function inflateInit2(strm: z_streamp; windowBits: int): int;
+
+implementation
+
+function deflateInit(strm: z_streamp; level: int): int;
+begin
+  Result := deflateInit_(strm, level, ZLIB_VERSION, sizeof(z_stream));
+end;
+
+function deflateInit2(strm: z_streamp; level, method, windowBits,
+                      memLevel, strategy: int): int;
+begin
+  Result := deflateInit2_(strm, level, method, windowBits, memLevel,
+                          strategy, ZLIB_VERSION, sizeof(z_stream));
+end;
+
+function inflateInit(strm: z_streamp): int;
+begin
+  Result := inflateInit_(strm, ZLIB_VERSION, sizeof(z_stream));
+end;
+
+function inflateInit2(strm: z_streamp; windowBits: int): int;
+begin
+  Result := inflateInit2_(strm, windowBits, ZLIB_VERSION,
+                          sizeof(z_stream));
+end;
+
+const
+  zlibDLL = 'png32bd.dll';
+
+function adler32; external zlibDLL;
+function crc32; external zlibDLL;
+function deflate; external zlibDLL;
+function deflateCopy; external zlibDLL;
+function deflateEnd; external zlibDLL;
+function deflateInit2_; external zlibDLL;
+function deflateInit_; external zlibDLL;
+function deflateParams; external zlibDLL;
+function deflateReset; external zlibDLL;
+function deflateSetDictionary; external zlibDLL;
+function inflate; external zlibDLL;
+function inflateEnd; external zlibDLL;
+function inflateInit2_; external zlibDLL;
+function inflateInit_; external zlibDLL;
+function inflateReset; external zlibDLL;
+function inflateSetDictionary; external zlibDLL;
+function inflateSync; external zlibDLL;
+
+end.

contrib/delphi2/d_zlib.bpr

@@ -0,0 +1,224 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.03
+# ---------------------------------------------------------------------------
+PROJECT = d_zlib.lib
+OBJFILES = d_zlib.obj adler32.obj deflate.obj infblock.obj infcodes.obj inffast.obj \
+  inflate.obj inftrees.obj infutil.obj trees.obj
+RESFILES =
+RESDEPEN = $(RESFILES)
+LIBFILES =
+LIBRARIES = VCL35.lib
+SPARELIBS = VCL35.lib
+DEFFILE =
+PACKAGES = VCLX35.bpi VCL35.bpi VCLDB35.bpi VCLDBX35.bpi ibsmp35.bpi bcbsmp35.bpi \
+  dclocx35.bpi QRPT35.bpi TEEUI35.bpi TEEDB35.bpi TEE35.bpi DSS35.bpi \
+  NMFAST35.bpi INETDB35.bpi INET35.bpi VCLMID35.bpi
+# ---------------------------------------------------------------------------
+PATHCPP = .;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+# ---------------------------------------------------------------------------
+CFLAG1 = -O2 -Ve -d -k- -vi
+CFLAG2 = -I$(BCB)\include;$(BCB)\include\vcl -H=$(BCB)\lib\vcl35.csm
+CFLAG3 = -ff -pr -5
+PFLAGS = -U;$(DEBUGLIBPATH) -I$(BCB)\include;$(BCB)\include\vcl -H -W -$I- -v -JPHN -M
+RFLAGS = -i$(BCB)\include;$(BCB)\include\vcl 
+AFLAGS = /i$(BCB)\include /i$(BCB)\include\vcl /mx /w2 /zn
+LFLAGS =
+IFLAGS = -g -Gn
+# ---------------------------------------------------------------------------
+ALLOBJ = c0w32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cp32mt.lib
+# ---------------------------------------------------------------------------
+!!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=2
+Item0=$(BCB)\include
+Item1=$(BCB)\include;$(BCB)\include\vcl
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib\obj;$(BCB)\lib
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+ ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = TLib
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=2
+Item0=$(BCB)\include;$(BCB)\include\vcl
+Item1=$(BCB)\include
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib\obj;$(BCB)\lib
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) $(IFLAGS) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
+# ---------------------------------------------------------------------------

contrib/delphi2/d_zlib.cpp

@@ -0,0 +1,17 @@
+#include <condefs.h>
+#pragma hdrstop
+//---------------------------------------------------------------------------
+USEUNIT("adler32.c");
+USEUNIT("deflate.c");
+USEUNIT("infblock.c");
+USEUNIT("infcodes.c");
+USEUNIT("inffast.c");
+USEUNIT("inflate.c");
+USEUNIT("inftrees.c");
+USEUNIT("infutil.c");
+USEUNIT("trees.c");
+//---------------------------------------------------------------------------
+#define Library
+
+// To add a file to the library use the Project menu 'Add to Project'.
+

contrib/delphi2/readme.txt

@@ -0,0 +1,17 @@
+These are files used to compile zlib under Borland C++ Builder 3.
+
+zlib.bpg is the main project group that can be loaded in the BCB IDE and
+loads all other *.bpr projects
+
+zlib.bpr is a project used to create a static zlib.lib library with C calling
+convention for functions.
+
+zlib32.bpr creates a zlib32.dll dynamic link library with Windows standard
+calling convention.
+
+d_zlib.bpr creates a set of .obj files with register calling convention.
+These files are used by zlib.pas to create a Delphi unit containing zlib.
+The d_zlib.lib file generated isn't useful and can be deleted.
+
+zlib.cpp, zlib32.cpp and d_zlib.cpp are used by the above projects.
+

contrib/delphi2/zlib.bpg

@@ -0,0 +1,26 @@
+#------------------------------------------------------------------------------
+VERSION = BWS.01
+#------------------------------------------------------------------------------
+!ifndef ROOT
+ROOT = $(MAKEDIR)\..
+!endif
+#------------------------------------------------------------------------------
+MAKE = $(ROOT)\bin\make.exe -$(MAKEFLAGS) -f$**
+DCC = $(ROOT)\bin\dcc32.exe $**
+BRCC = $(ROOT)\bin\brcc32.exe $**
+#------------------------------------------------------------------------------
+PROJECTS = zlib zlib32 d_zlib
+#------------------------------------------------------------------------------
+default: $(PROJECTS)
+#------------------------------------------------------------------------------
+
+zlib: zlib.bpr
+  $(MAKE)
+
+zlib32: zlib32.bpr
+  $(MAKE)
+
+d_zlib: d_zlib.bpr
+  $(MAKE)
+
+

contrib/delphi2/zlib.bpr

@@ -0,0 +1,225 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.03
+# ---------------------------------------------------------------------------
+PROJECT = zlib.lib
+OBJFILES = zlib.obj adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infblock.obj \
+  infcodes.obj inffast.obj inflate.obj inftrees.obj infutil.obj trees.obj \
+  uncompr.obj zutil.obj
+RESFILES =
+RESDEPEN = $(RESFILES)
+LIBFILES =
+LIBRARIES = VCL35.lib
+SPARELIBS = VCL35.lib
+DEFFILE =
+PACKAGES = VCLX35.bpi VCL35.bpi VCLDB35.bpi VCLDBX35.bpi ibsmp35.bpi bcbsmp35.bpi \
+  dclocx35.bpi QRPT35.bpi TEEUI35.bpi TEEDB35.bpi TEE35.bpi DSS35.bpi \
+  NMFAST35.bpi INETDB35.bpi INET35.bpi VCLMID35.bpi
+# ---------------------------------------------------------------------------
+PATHCPP = .;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+# ---------------------------------------------------------------------------
+CFLAG1 = -O2 -Ve -d -k- -vi
+CFLAG2 = -I$(BCB)\include;$(BCB)\include\vcl -H=$(BCB)\lib\vcl35.csm
+CFLAG3 = -ff -5
+PFLAGS = -U;$(DEBUGLIBPATH) -I$(BCB)\include;$(BCB)\include\vcl -H -W -$I- -v -JPHN -M
+RFLAGS = -i$(BCB)\include;$(BCB)\include\vcl 
+AFLAGS = /i$(BCB)\include /i$(BCB)\include\vcl /mx /w2 /zn
+LFLAGS =
+IFLAGS = -g -Gn
+# ---------------------------------------------------------------------------
+ALLOBJ = c0w32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cp32mt.lib
+# ---------------------------------------------------------------------------
+!!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=2
+Item0=$(BCB)\include
+Item1=$(BCB)\include;$(BCB)\include\vcl
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib\obj;$(BCB)\lib
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+ ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = TLib
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=2
+Item0=$(BCB)\include;$(BCB)\include\vcl
+Item1=$(BCB)\include
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib\obj;$(BCB)\lib
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) $(IFLAGS) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
+# ---------------------------------------------------------------------------

contrib/delphi2/zlib.cpp

@@ -0,0 +1,22 @@
+#include <condefs.h>
+#pragma hdrstop
+//---------------------------------------------------------------------------
+USEUNIT("adler32.c");
+USEUNIT("compress.c");
+USEUNIT("crc32.c");
+USEUNIT("deflate.c");
+USEUNIT("gzio.c");
+USEUNIT("infblock.c");
+USEUNIT("infcodes.c");
+USEUNIT("inffast.c");
+USEUNIT("inflate.c");
+USEUNIT("inftrees.c");
+USEUNIT("infutil.c");
+USEUNIT("trees.c");
+USEUNIT("uncompr.c");
+USEUNIT("zutil.c");
+//---------------------------------------------------------------------------
+#define Library
+
+// To add a file to the library use the Project menu 'Add to Project'.
+

contrib/delphi2/zlib.pas

@@ -0,0 +1,534 @@
+{*******************************************************}
+{                                                       }
+{       Delphi Supplemental Components                  }
+{       ZLIB Data Compression Interface Unit            }
+{                                                       }
+{       Copyright (c) 1997 Borland International        }
+{                                                       }
+{*******************************************************}
+
+{ Modified for zlib 1.1.3 by Davide Moretti <dave@rimini.com }
+
+unit zlib;
+
+interface
+
+uses Sysutils, Classes;
+
+type
+  TAlloc = function (AppData: Pointer; Items, Size: Integer): Pointer;
+  TFree = procedure (AppData, Block: Pointer);
+
+  // Internal structure.  Ignore.
+  TZStreamRec = packed record
+    next_in: PChar;       // next input byte
+    avail_in: Integer;    // number of bytes available at next_in
+    total_in: Integer;    // total nb of input bytes read so far
+
+    next_out: PChar;      // next output byte should be put here
+    avail_out: Integer;   // remaining free space at next_out
+    total_out: Integer;   // total nb of bytes output so far
+
+    msg: PChar;           // last error message, NULL if no error
+    internal: Pointer;    // not visible by applications
+
+    zalloc: TAlloc;       // used to allocate the internal state
+    zfree: TFree;         // used to free the internal state
+    AppData: Pointer;     // private data object passed to zalloc and zfree
+
+    data_type: Integer;   //  best guess about the data type: ascii or binary
+    adler: Integer;       // adler32 value of the uncompressed data
+    reserved: Integer;    // reserved for future use
+  end;
+
+  // Abstract ancestor class
+  TCustomZlibStream = class(TStream)
+  private
+    FStrm: TStream;
+    FStrmPos: Integer;
+    FOnProgress: TNotifyEvent;
+    FZRec: TZStreamRec;
+    FBuffer: array [Word] of Char;
+  protected
+    procedure Progress(Sender: TObject); dynamic;
+    property OnProgress: TNotifyEvent read FOnProgress write FOnProgress;
+    constructor Create(Strm: TStream);
+  end;
+
+{ TCompressionStream compresses data on the fly as data is written to it, and
+  stores the compressed data to another stream.
+
+  TCompressionStream is write-only and strictly sequential. Reading from the
+  stream will raise an exception. Using Seek to move the stream pointer
+  will raise an exception.
+
+  Output data is cached internally, written to the output stream only when
+  the internal output buffer is full.  All pending output data is flushed
+  when the stream is destroyed.
+
+  The Position property returns the number of uncompressed bytes of
+  data that have been written to the stream so far.
+
+  CompressionRate returns the on-the-fly percentage by which the original
+  data has been compressed:  (1 - (CompressedBytes / UncompressedBytes)) * 100
+  If raw data size = 100 and compressed data size = 25, the CompressionRate
+  is 75%
+
+  The OnProgress event is called each time the output buffer is filled and
+  written to the output stream.  This is useful for updating a progress
+  indicator when you are writing a large chunk of data to the compression
+  stream in a single call.}
+
+
+  TCompressionLevel = (clNone, clFastest, clDefault, clMax);
+
+  TCompressionStream = class(TCustomZlibStream)
+  private
+    function GetCompressionRate: Single;
+  public
+    constructor Create(CompressionLevel: TCompressionLevel; Dest: TStream);
+    destructor Destroy; override;
+    function Read(var Buffer; Count: Longint): Longint; override;
+    function Write(const Buffer; Count: Longint): Longint; override;
+    function Seek(Offset: Longint; Origin: Word): Longint; override;
+    property CompressionRate: Single read GetCompressionRate;
+    property OnProgress;
+  end;
+
+{ TDecompressionStream decompresses data on the fly as data is read from it.
+
+  Compressed data comes from a separate source stream.  TDecompressionStream
+  is read-only and unidirectional; you can seek forward in the stream, but not
+  backwards.  The special case of setting the stream position to zero is
+  allowed.  Seeking forward decompresses data until the requested position in
+  the uncompressed data has been reached.  Seeking backwards, seeking relative
+  to the end of the stream, requesting the size of the stream, and writing to
+  the stream will raise an exception.
+
+  The Position property returns the number of bytes of uncompressed data that
+  have been read from the stream so far.
+
+  The OnProgress event is called each time the internal input buffer of
+  compressed data is exhausted and the next block is read from the input stream.
+  This is useful for updating a progress indicator when you are reading a
+  large chunk of data from the decompression stream in a single call.}
+
+  TDecompressionStream = class(TCustomZlibStream)
+  public
+    constructor Create(Source: TStream);
+    destructor Destroy; override;
+    function Read(var Buffer; Count: Longint): Longint; override;
+    function Write(const Buffer; Count: Longint): Longint; override;
+    function Seek(Offset: Longint; Origin: Word): Longint; override;
+    property OnProgress;
+  end;
+
+
+
+{ CompressBuf compresses data, buffer to buffer, in one call.
+   In: InBuf = ptr to compressed data
+       InBytes = number of bytes in InBuf
+  Out: OutBuf = ptr to newly allocated buffer containing decompressed data
+       OutBytes = number of bytes in OutBuf   }
+procedure CompressBuf(const InBuf: Pointer; InBytes: Integer;
+                      out OutBuf: Pointer; out OutBytes: Integer);
+
+
+{ DecompressBuf decompresses data, buffer to buffer, in one call.
+   In: InBuf = ptr to compressed data
+       InBytes = number of bytes in InBuf
+       OutEstimate = zero, or est. size of the decompressed data
+  Out: OutBuf = ptr to newly allocated buffer containing decompressed data
+       OutBytes = number of bytes in OutBuf   }
+procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer;
+ OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer);
+
+const
+  zlib_version = '1.1.3';
+
+type
+  EZlibError = class(Exception);
+  ECompressionError = class(EZlibError);
+  EDecompressionError = class(EZlibError);
+
+function adler32(adler: Integer; buf: PChar; len: Integer): Integer;
+
+implementation
+
+const
+  Z_NO_FLUSH      = 0;
+  Z_PARTIAL_FLUSH = 1;
+  Z_SYNC_FLUSH    = 2;
+  Z_FULL_FLUSH    = 3;
+  Z_FINISH        = 4;
+
+  Z_OK            = 0;
+  Z_STREAM_END    = 1;
+  Z_NEED_DICT     = 2;
+  Z_ERRNO         = (-1);
+  Z_STREAM_ERROR  = (-2);
+  Z_DATA_ERROR    = (-3);
+  Z_MEM_ERROR     = (-4);
+  Z_BUF_ERROR     = (-5);
+  Z_VERSION_ERROR = (-6);
+
+  Z_NO_COMPRESSION       =   0;
+  Z_BEST_SPEED           =   1;
+  Z_BEST_COMPRESSION     =   9;
+  Z_DEFAULT_COMPRESSION  = (-1);
+
+  Z_FILTERED            = 1;
+  Z_HUFFMAN_ONLY        = 2;
+  Z_DEFAULT_STRATEGY    = 0;
+
+  Z_BINARY   = 0;
+  Z_ASCII    = 1;
+  Z_UNKNOWN  = 2;
+
+  Z_DEFLATED = 8;
+
+  _z_errmsg: array[0..9] of PChar = (
+    'need dictionary',      // Z_NEED_DICT      (2)
+    'stream end',           // Z_STREAM_END     (1)
+    '',                     // Z_OK             (0)
+    'file error',           // Z_ERRNO          (-1)
+    'stream error',         // Z_STREAM_ERROR   (-2)
+    'data error',           // Z_DATA_ERROR     (-3)
+    'insufficient memory',  // Z_MEM_ERROR      (-4)
+    'buffer error',         // Z_BUF_ERROR      (-5)
+    'incompatible version', // Z_VERSION_ERROR  (-6)
+    ''
+  );
+
+{$L deflate.obj}
+{$L inflate.obj}
+{$L inftrees.obj}
+{$L trees.obj}
+{$L adler32.obj}
+{$L infblock.obj}
+{$L infcodes.obj}
+{$L infutil.obj}
+{$L inffast.obj}
+
+procedure _tr_init; external;
+procedure _tr_tally; external;
+procedure _tr_flush_block; external;
+procedure _tr_align; external;
+procedure _tr_stored_block; external;
+function adler32; external;
+procedure inflate_blocks_new; external;
+procedure inflate_blocks; external;
+procedure inflate_blocks_reset; external;
+procedure inflate_blocks_free; external;
+procedure inflate_set_dictionary; external;
+procedure inflate_trees_bits; external;
+procedure inflate_trees_dynamic; external;
+procedure inflate_trees_fixed; external;
+procedure inflate_codes_new; external;
+procedure inflate_codes; external;
+procedure inflate_codes_free; external;
+procedure _inflate_mask; external;
+procedure inflate_flush; external;
+procedure inflate_fast; external;
+
+procedure _memset(P: Pointer; B: Byte; count: Integer);cdecl;
+begin
+  FillChar(P^, count, B);
+end;
+
+procedure _memcpy(dest, source: Pointer; count: Integer);cdecl;
+begin
+  Move(source^, dest^, count);
+end;
+
+
+
+// deflate compresses data
+function deflateInit_(var strm: TZStreamRec; level: Integer; version: PChar;
+  recsize: Integer): Integer; external;
+function deflate(var strm: TZStreamRec; flush: Integer): Integer; external;
+function deflateEnd(var strm: TZStreamRec): Integer; external;
+
+// inflate decompresses data
+function inflateInit_(var strm: TZStreamRec; version: PChar;
+  recsize: Integer): Integer; external;
+function inflate(var strm: TZStreamRec; flush: Integer): Integer; external;
+function inflateEnd(var strm: TZStreamRec): Integer; external;
+function inflateReset(var strm: TZStreamRec): Integer; external;
+
+
+function zcalloc(AppData: Pointer; Items, Size: Integer): Pointer;
+begin
+  GetMem(Result, Items*Size);
+end;
+
+procedure zcfree(AppData, Block: Pointer);
+begin
+  FreeMem(Block);
+end;
+
+function zlibCheck(code: Integer): Integer;
+begin
+  Result := code;
+  if code < 0 then
+    raise EZlibError.Create('error');    //!!
+end;
+
+function CCheck(code: Integer): Integer;
+begin
+  Result := code;
+  if code < 0 then
+    raise ECompressionError.Create('error'); //!!
+end;
+
+function DCheck(code: Integer): Integer;
+begin
+  Result := code;
+  if code < 0 then
+    raise EDecompressionError.Create('error');  //!!
+end;
+
+procedure CompressBuf(const InBuf: Pointer; InBytes: Integer;
+                      out OutBuf: Pointer; out OutBytes: Integer);
+var
+  strm: TZStreamRec;
+  P: Pointer;
+begin
+  FillChar(strm, sizeof(strm), 0);
+  OutBytes := ((InBytes + (InBytes div 10) + 12) + 255) and not 255;
+  GetMem(OutBuf, OutBytes);
+  try
+    strm.next_in := InBuf;
+    strm.avail_in := InBytes;
+    strm.next_out := OutBuf;
+    strm.avail_out := OutBytes;
+    CCheck(deflateInit_(strm, Z_BEST_COMPRESSION, zlib_version, sizeof(strm)));
+    try
+      while CCheck(deflate(strm, Z_FINISH)) <> Z_STREAM_END do
+      begin
+        P := OutBuf;
+        Inc(OutBytes, 256);
+        ReallocMem(OutBuf, OutBytes);
+        strm.next_out := PChar(Integer(OutBuf) + (Integer(strm.next_out) - Integer(P)));
+        strm.avail_out := 256;
+      end;
+    finally
+      CCheck(deflateEnd(strm));
+    end;
+    ReallocMem(OutBuf, strm.total_out);
+    OutBytes := strm.total_out;
+  except
+    FreeMem(OutBuf);
+    raise
+  end;
+end;
+
+
+procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer;
+  OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer);
+var
+  strm: TZStreamRec;
+  P: Pointer;
+  BufInc: Integer;
+begin
+  FillChar(strm, sizeof(strm), 0);
+  BufInc := (InBytes + 255) and not 255;
+  if OutEstimate = 0 then
+    OutBytes := BufInc
+  else
+    OutBytes := OutEstimate;
+  GetMem(OutBuf, OutBytes);
+  try
+    strm.next_in := InBuf;
+    strm.avail_in := InBytes;
+    strm.next_out := OutBuf;
+    strm.avail_out := OutBytes;
+    DCheck(inflateInit_(strm, zlib_version, sizeof(strm)));
+    try
+      while DCheck(inflate(strm, Z_FINISH)) <> Z_STREAM_END do
+      begin
+        P := OutBuf;
+        Inc(OutBytes, BufInc);
+        ReallocMem(OutBuf, OutBytes);
+        strm.next_out := PChar(Integer(OutBuf) + (Integer(strm.next_out) - Integer(P)));
+        strm.avail_out := BufInc;
+      end;
+    finally
+      DCheck(inflateEnd(strm));
+    end;
+    ReallocMem(OutBuf, strm.total_out);
+    OutBytes := strm.total_out;
+  except
+    FreeMem(OutBuf);
+    raise
+  end;
+end;
+
+
+// TCustomZlibStream
+
+constructor TCustomZLibStream.Create(Strm: TStream);
+begin
+  inherited Create;
+  FStrm := Strm;
+  FStrmPos := Strm.Position;
+end;
+
+procedure TCustomZLibStream.Progress(Sender: TObject);
+begin
+  if Assigned(FOnProgress) then FOnProgress(Sender);
+end;
+
+
+// TCompressionStream
+
+constructor TCompressionStream.Create(CompressionLevel: TCompressionLevel;
+  Dest: TStream);
+const
+  Levels: array [TCompressionLevel] of ShortInt =
+    (Z_NO_COMPRESSION, Z_BEST_SPEED, Z_DEFAULT_COMPRESSION, Z_BEST_COMPRESSION);
+begin
+  inherited Create(Dest);
+  FZRec.next_out := FBuffer;
+  FZRec.avail_out := sizeof(FBuffer);
+  CCheck(deflateInit_(FZRec, Levels[CompressionLevel], zlib_version, sizeof(FZRec)));
+end;
+
+destructor TCompressionStream.Destroy;
+begin
+  FZRec.next_in := nil;
+  FZRec.avail_in := 0;
+  try
+    if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
+    while (CCheck(deflate(FZRec, Z_FINISH)) <> Z_STREAM_END)
+      and (FZRec.avail_out = 0) do
+    begin
+      FStrm.WriteBuffer(FBuffer, sizeof(FBuffer));
+      FZRec.next_out := FBuffer;
+      FZRec.avail_out := sizeof(FBuffer);
+    end;
+    if FZRec.avail_out < sizeof(FBuffer) then
+      FStrm.WriteBuffer(FBuffer, sizeof(FBuffer) - FZRec.avail_out);
+  finally
+    deflateEnd(FZRec);
+  end;
+  inherited Destroy;
+end;
+
+function TCompressionStream.Read(var Buffer; Count: Longint): Longint;
+begin
+  raise ECompressionError.Create('Invalid stream operation');
+end;
+
+function TCompressionStream.Write(const Buffer; Count: Longint): Longint;
+begin
+  FZRec.next_in := @Buffer;
+  FZRec.avail_in := Count;
+  if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
+  while (FZRec.avail_in > 0) do
+  begin
+    CCheck(deflate(FZRec, 0));
+    if FZRec.avail_out = 0 then
+    begin
+      FStrm.WriteBuffer(FBuffer, sizeof(FBuffer));
+      FZRec.next_out := FBuffer;
+      FZRec.avail_out := sizeof(FBuffer);
+      FStrmPos := FStrm.Position;
+      Progress(Self);
+    end;
+  end;
+  Result := Count;
+end;
+
+function TCompressionStream.Seek(Offset: Longint; Origin: Word): Longint;
+begin
+  if (Offset = 0) and (Origin = soFromCurrent) then
+    Result := FZRec.total_in
+  else
+    raise ECompressionError.Create('Invalid stream operation');
+end;
+
+function TCompressionStream.GetCompressionRate: Single;
+begin
+  if FZRec.total_in = 0 then
+    Result := 0
+  else
+    Result := (1.0 - (FZRec.total_out / FZRec.total_in)) * 100.0;
+end;
+
+
+// TDecompressionStream
+
+constructor TDecompressionStream.Create(Source: TStream);
+begin
+  inherited Create(Source);
+  FZRec.next_in := FBuffer;
+  FZRec.avail_in := 0;
+  DCheck(inflateInit_(FZRec, zlib_version, sizeof(FZRec)));
+end;
+
+destructor TDecompressionStream.Destroy;
+begin
+  inflateEnd(FZRec);
+  inherited Destroy;
+end;
+
+function TDecompressionStream.Read(var Buffer; Count: Longint): Longint;
+begin
+  FZRec.next_out := @Buffer;
+  FZRec.avail_out := Count;
+  if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
+  while (FZRec.avail_out > 0) do
+  begin
+    if FZRec.avail_in = 0 then
+    begin
+      FZRec.avail_in := FStrm.Read(FBuffer, sizeof(FBuffer));
+      if FZRec.avail_in = 0 then
+        begin
+          Result := Count - FZRec.avail_out;
+          Exit;
+        end;
+      FZRec.next_in := FBuffer;
+      FStrmPos := FStrm.Position;
+      Progress(Self);
+    end;
+    DCheck(inflate(FZRec, 0));
+  end;
+  Result := Count;
+end;
+
+function TDecompressionStream.Write(const Buffer; Count: Longint): Longint;
+begin
+  raise EDecompressionError.Create('Invalid stream operation');
+end;
+
+function TDecompressionStream.Seek(Offset: Longint; Origin: Word): Longint;
+var
+  I: Integer;
+  Buf: array [0..4095] of Char;
+begin
+  if (Offset = 0) and (Origin = soFromBeginning) then
+  begin
+    DCheck(inflateReset(FZRec));
+    FZRec.next_in := FBuffer;
+    FZRec.avail_in := 0;
+    FStrm.Position := 0;
+    FStrmPos := 0;
+  end
+  else if ( (Offset >= 0) and (Origin = soFromCurrent)) or
+          ( ((Offset - FZRec.total_out) > 0) and (Origin = soFromBeginning)) then
+  begin
+    if Origin = soFromBeginning then Dec(Offset, FZRec.total_out);
+    if Offset > 0 then
+    begin
+      for I := 1 to Offset div sizeof(Buf) do
+        ReadBuffer(Buf, sizeof(Buf));
+      ReadBuffer(Buf, Offset mod sizeof(Buf));
+    end;
+  end
+  else
+    raise EDecompressionError.Create('Invalid stream operation');
+  Result := FZRec.total_out;
+end;
+
+end.

contrib/delphi2/zlib32.bpr

@@ -0,0 +1,174 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.03
+# ---------------------------------------------------------------------------
+PROJECT = zlib32.dll
+OBJFILES = zlib32.obj adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infblock.obj \
+  infcodes.obj inffast.obj inflate.obj inftrees.obj infutil.obj trees.obj \
+  uncompr.obj zutil.obj
+RESFILES =
+RESDEPEN = $(RESFILES)
+LIBFILES =
+LIBRARIES = 
+SPARELIBS = 
+DEFFILE =
+PACKAGES = VCLX35.bpi VCL35.bpi VCLDB35.bpi VCLDBX35.bpi ibsmp35.bpi bcbsmp35.bpi \
+  dclocx35.bpi QRPT35.bpi TEEUI35.bpi TEEDB35.bpi TEE35.bpi DSS35.bpi \
+  NMFAST35.bpi INETDB35.bpi INET35.bpi VCLMID35.bpi
+# ---------------------------------------------------------------------------
+PATHCPP = .;
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+# ---------------------------------------------------------------------------
+CFLAG1 = -WD -O2 -Ve -d -k- -vi -c -tWD
+CFLAG2 = -D_NO_VCL;ZLIB_DLL -I$(BCB)\include
+CFLAG3 = -ff -5
+PFLAGS = -D_NO_VCL;ZLIB_DLL -U$(BCB)\lib;$(RELEASELIBPATH) -I$(BCB)\include -$I- -v \
+  -JPHN -M
+RFLAGS = -D_NO_VCL;ZLIB_DLL -i$(BCB)\include
+AFLAGS = /i$(BCB)\include /d_NO_VCL /dZLIB_DLL /mx /w2 /zn
+LFLAGS = -L$(BCB)\lib;$(RELEASELIBPATH) -aa -Tpd -x -Gi
+IFLAGS = -Gn -g
+# ---------------------------------------------------------------------------
+ALLOBJ = c0d32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES)  import32.lib cw32mt.lib
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=1
+Locale=1040
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=DLL (GUI)
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=1
+Item0=$(BCB)\include
+
+[HistoryLists\hlLibraryPath]
+Count=1
+Item0=$(BCB)\lib
+
+[HistoryLists\hlConditionals]
+Count=1
+Item0=_NO_VCL;ZLIB_DLL
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+
+!endif
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE.  It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C   = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC  = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+    $(BCB)\BIN\$(LINKER) @&&!
+    $(LFLAGS) $(IFLAGS) +
+    $(ALLOBJ), +
+    $(PROJECT),, +
+    $(ALLLIB), +
+    $(DEFFILE), +
+    $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.pas.obj:
+    $(BCB)\BIN\$(DCC32) $(PFLAGS) {$< }
+
+.cpp.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.c.obj:
+    $(BCB)\BIN\$(BCC32) $(CFLAG1) $(CFLAG2) $(CFLAG3) -n$(@D) {$< }
+
+.asm.obj:
+    $(BCB)\BIN\$(TASM32) $(AFLAGS) $<, $@
+
+.rc.res:
+    $(BCB)\BIN\$(BRCC32) $(RFLAGS) -fo$@ $<
+# ---------------------------------------------------------------------------

contrib/delphi2/zlib32.cpp

@@ -0,0 +1,42 @@
+
+#include <windows.h>
+#pragma hdrstop
+#include <condefs.h>
+
+
+//---------------------------------------------------------------------------
+//   Important note about DLL memory management in a VCL DLL:
+//
+//
+//
+// If your DLL uses VCL and exports any functions that pass VCL String objects
+// (or structs/classes containing nested Strings) as parameter or function
+// results, you will need to build both your DLL project and any EXE projects
+// that use your DLL with the dynamic RTL (the RTL DLL).  This will change your
+// DLL and its calling EXE's to use BORLNDMM.DLL as their memory manager. In
+// these cases, the file BORLNDMM.DLL should be deployed along with your DLL
+// and the RTL DLL (CP3240MT.DLL). To avoid the requiring BORLNDMM.DLL in
+// these situations, pass string information using "char *" or ShortString
+// parameters and then link with the static RTL.
+//
+//---------------------------------------------------------------------------
+USEUNIT("adler32.c");
+USEUNIT("compress.c");
+USEUNIT("crc32.c");
+USEUNIT("deflate.c");
+USEUNIT("gzio.c");
+USEUNIT("infblock.c");
+USEUNIT("infcodes.c");
+USEUNIT("inffast.c");
+USEUNIT("inflate.c");
+USEUNIT("inftrees.c");
+USEUNIT("infutil.c");
+USEUNIT("trees.c");
+USEUNIT("uncompr.c");
+USEUNIT("zutil.c");
+//---------------------------------------------------------------------------
+#pragma argsused
+int WINAPI DllEntryPoint(HINSTANCE hinst, unsigned long reason, void*)
+{
+        return 1;
+}

contrib/iostream/test.cpp

@@ -0,0 +1,24 @@
+
+#include "zfstream.h"
+
+int main() {
+
+  // Construct a stream object with this filebuffer.  Anything sent
+  // to this stream will go to standard out.
+  gzofstream os( 1, ios::out );
+
+  // This text is getting compressed and sent to stdout.
+  // To prove this, run 'test | zcat'.
+  os << "Hello, Mommy" << endl;
+
+  os << setcompressionlevel( Z_NO_COMPRESSION );
+  os << "hello, hello, hi, ho!" << endl;
+
+  setcompressionlevel( os, Z_DEFAULT_COMPRESSION )
+    << "I'm compressing again" << endl;
+
+  os.close();
+
+  return 0;
+
+}

contrib/iostream/zfstream.cpp

@@ -0,0 +1,329 @@
+
+#include <memory.h>
+#include "zfstream.h"
+
+gzfilebuf::gzfilebuf() :
+  file(NULL),
+  mode(0),
+  own_file_descriptor(0)
+{ }
+
+gzfilebuf::~gzfilebuf() {
+
+  sync();
+  if ( own_file_descriptor )
+    close();
+
+}
+
+gzfilebuf *gzfilebuf::open( const char *name,
+			    int io_mode ) {
+
+  if ( is_open() )
+    return NULL;
+
+  char char_mode[10];
+  char *p;
+  memset(char_mode,'\0',10);
+  p = char_mode;
+
+  if ( io_mode & ios::in ) {
+    mode = ios::in;
+    *p++ = 'r';
+  } else if ( io_mode & ios::app ) {
+    mode = ios::app;
+    *p++ = 'a';
+  } else {
+    mode = ios::out;
+    *p++ = 'w';
+  }
+
+  if ( io_mode & ios::binary ) {
+    mode |= ios::binary;
+    *p++ = 'b';
+  }
+
+  // Hard code the compression level
+  if ( io_mode & (ios::out|ios::app )) {
+    *p++ = '9';
+  }
+
+  if ( (file = gzopen(name, char_mode)) == NULL )
+    return NULL;
+
+  own_file_descriptor = 1;
+
+  return this;
+
+}
+
+gzfilebuf *gzfilebuf::attach( int file_descriptor,
+			      int io_mode ) {
+
+  if ( is_open() )
+    return NULL;
+
+  char char_mode[10];
+  char *p;
+  memset(char_mode,'\0',10);
+  p = char_mode;
+
+  if ( io_mode & ios::in ) {
+    mode = ios::in;
+    *p++ = 'r';
+  } else if ( io_mode & ios::app ) {
+    mode = ios::app;
+    *p++ = 'a';
+  } else {
+    mode = ios::out;
+    *p++ = 'w';
+  }
+
+  if ( io_mode & ios::binary ) {
+    mode |= ios::binary;
+    *p++ = 'b';
+  }
+
+  // Hard code the compression level
+  if ( io_mode & (ios::out|ios::app )) {
+    *p++ = '9';
+  }
+
+  if ( (file = gzdopen(file_descriptor, char_mode)) == NULL )
+    return NULL;
+
+  own_file_descriptor = 0;
+
+  return this;
+
+}
+
+gzfilebuf *gzfilebuf::close() {
+
+  if ( is_open() ) {
+
+    sync();
+    gzclose( file );
+    file = NULL;
+
+  }
+
+  return this;
+
+}
+
+int gzfilebuf::setcompressionlevel( short comp_level ) {
+
+  return gzsetparams(file, comp_level, -2);
+
+}
+
+int gzfilebuf::setcompressionstrategy( short comp_strategy ) {
+
+  return gzsetparams(file, -2, comp_strategy);
+
+}
+
+
+streampos gzfilebuf::seekoff( streamoff off, ios::seek_dir dir, int which ) {
+
+  return streampos(EOF);
+
+}
+
+int gzfilebuf::underflow() {
+
+  // If the file hasn't been opened for reading, error.
+  if ( !is_open() || !(mode & ios::in) )
+    return EOF;
+
+  // if a buffer doesn't exists, allocate one.
+  if ( !base() ) {
+
+    if ( (allocate()) == EOF )
+      return EOF;
+    setp(0,0);
+
+  } else {
+
+    if ( in_avail() )
+      return (unsigned char) *gptr();
+
+    if ( out_waiting() ) {
+      if ( flushbuf() == EOF )
+	return EOF;
+    }
+
+  }
+
+  // Attempt to fill the buffer.
+
+  int result = fillbuf();
+  if ( result == EOF ) {
+    // disable get area
+    setg(0,0,0);
+    return EOF;
+  }
+
+  return (unsigned char) *gptr();
+
+}
+
+int gzfilebuf::overflow( int c ) {
+
+  if ( !is_open() || !(mode & ios::out) )
+    return EOF;
+
+  if ( !base() ) {
+    if ( allocate() == EOF )
+      return EOF;
+    setg(0,0,0);
+  } else {
+    if (in_avail()) {
+	return EOF;
+    }
+    if (out_waiting()) {
+      if (flushbuf() == EOF)
+	return EOF;
+    }
+  }
+
+  int bl = blen();
+  setp( base(), base() + bl);
+
+  if ( c != EOF ) {
+
+    *pptr() = c;
+    pbump(1);
+
+  }
+
+  return 0;
+
+}
+
+int gzfilebuf::sync() {
+
+  if ( !is_open() )
+    return EOF;
+
+  if ( out_waiting() )
+    return flushbuf();
+
+  return 0;
+
+}
+
+int gzfilebuf::flushbuf() {
+
+  int n;
+  char *q;
+
+  q = pbase();
+  n = pptr() - q;
+
+  if ( gzwrite( file, q, n) < n )
+    return EOF;
+
+  setp(0,0);
+
+  return 0;
+
+}
+
+int gzfilebuf::fillbuf() {
+
+  int required;
+  char *p;
+
+  p = base();
+
+  required = blen();
+
+  int t = gzread( file, p, required );
+
+  if ( t <= 0) return EOF;
+
+  setg( base(), base(), base()+t);
+
+  return t;
+
+}
+
+gzfilestream_common::gzfilestream_common() :
+  ios( gzfilestream_common::rdbuf() )
+{ }
+
+gzfilestream_common::~gzfilestream_common()
+{ }
+
+void gzfilestream_common::attach( int fd, int io_mode ) {
+
+  if ( !buffer.attach( fd, io_mode) )
+    clear( ios::failbit | ios::badbit );
+  else
+    clear();
+
+}
+
+void gzfilestream_common::open( const char *name, int io_mode ) {
+
+  if ( !buffer.open( name, io_mode ) )
+    clear( ios::failbit | ios::badbit );
+  else
+    clear();
+
+}
+
+void gzfilestream_common::close() {
+
+  if ( !buffer.close() )
+    clear( ios::failbit | ios::badbit );
+
+}
+
+gzfilebuf *gzfilestream_common::rdbuf() {
+
+  return &buffer;
+
+}
+     
+gzifstream::gzifstream() :
+  ios( gzfilestream_common::rdbuf() )
+{
+  clear( ios::badbit );
+}
+
+gzifstream::gzifstream( const char *name, int io_mode ) :
+  ios( gzfilestream_common::rdbuf() )
+{
+  gzfilestream_common::open( name, io_mode );
+}
+
+gzifstream::gzifstream( int fd, int io_mode ) :
+  ios( gzfilestream_common::rdbuf() )
+{
+  gzfilestream_common::attach( fd, io_mode );
+}
+
+gzifstream::~gzifstream() { }
+
+gzofstream::gzofstream() :
+  ios( gzfilestream_common::rdbuf() )
+{
+  clear( ios::badbit );
+}
+
+gzofstream::gzofstream( const char *name, int io_mode ) :
+  ios( gzfilestream_common::rdbuf() )
+{
+  gzfilestream_common::open( name, io_mode );
+}
+
+gzofstream::gzofstream( int fd, int io_mode ) :
+  ios( gzfilestream_common::rdbuf() )
+{
+  gzfilestream_common::attach( fd, io_mode );
+}
+
+gzofstream::~gzofstream() { }

contrib/iostream/zfstream.h

@@ -0,0 +1,142 @@
+
+#ifndef _zfstream_h
+#define _zfstream_h
+
+#include <fstream.h>
+#include "zlib.h"
+
+class gzfilebuf : public streambuf {
+
+public:
+
+  gzfilebuf( );
+  virtual ~gzfilebuf();
+
+  gzfilebuf *open( const char *name, int io_mode );
+  gzfilebuf *attach( int file_descriptor, int io_mode );
+  gzfilebuf *close();
+
+  int setcompressionlevel( short comp_level );
+  int setcompressionstrategy( short comp_strategy );
+
+  inline int is_open() const { return (file !=NULL); }
+
+  virtual streampos seekoff( streamoff, ios::seek_dir, int );
+
+  virtual int sync();
+
+protected:
+
+  virtual int underflow();
+  virtual int overflow( int = EOF );
+
+private:
+
+  gzFile file;
+  short mode;
+  short own_file_descriptor;
+
+  int flushbuf();
+  int fillbuf();
+
+};
+
+class gzfilestream_common : virtual public ios {
+
+  friend class gzifstream;
+  friend class gzofstream;
+  friend gzofstream &setcompressionlevel( gzofstream &, int );
+  friend gzofstream &setcompressionstrategy( gzofstream &, int );
+
+public:
+  virtual ~gzfilestream_common();
+
+  void attach( int fd, int io_mode );
+  void open( const char *name, int io_mode );
+  void close();
+
+protected:
+  gzfilestream_common();
+
+private:
+  gzfilebuf *rdbuf();
+
+  gzfilebuf buffer;
+
+};
+
+class gzifstream : public gzfilestream_common, public istream {
+
+public:
+
+  gzifstream();
+  gzifstream( const char *name, int io_mode = ios::in );
+  gzifstream( int fd, int io_mode = ios::in );
+
+  virtual ~gzifstream();
+
+};
+
+class gzofstream : public gzfilestream_common, public ostream {
+
+public:
+
+  gzofstream();
+  gzofstream( const char *name, int io_mode = ios::out );
+  gzofstream( int fd, int io_mode = ios::out );
+
+  virtual ~gzofstream();
+
+};
+
+template<class T> class gzomanip {
+  friend gzofstream &operator<<(gzofstream &, const gzomanip<T> &);
+public:
+  gzomanip(gzofstream &(*f)(gzofstream &, T), T v) : func(f), val(v) { }
+private:
+  gzofstream &(*func)(gzofstream &, T);
+  T val;
+};
+
+template<class T> gzofstream &operator<<(gzofstream &s,
+					 const gzomanip<T> &m) {
+  return (*m.func)(s, m.val);
+  
+}
+
+inline gzofstream &setcompressionlevel( gzofstream &s, int l ) {
+  (s.rdbuf())->setcompressionlevel(l);
+  return s;
+}
+
+inline gzofstream &setcompressionstrategy( gzofstream &s, int l ) {
+  (s.rdbuf())->setcompressionstrategy(l);
+  return s;
+}
+
+inline gzomanip<int> setcompressionlevel(int l)
+{
+  return gzomanip<int>(&setcompressionlevel,l);
+}
+
+inline gzomanip<int> setcompressionstrategy(int l)
+{
+  return gzomanip<int>(&setcompressionstrategy,l);
+}
+
+#endif
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+

contrib/iostream2/zstream.h

@@ -0,0 +1,307 @@
+/*
+ *
+ * Copyright (c) 1997
+ * Christian Michelsen Research AS
+ * Advanced Computing
+ * Fantoftvegen 38, 5036 BERGEN, Norway
+ * http://www.cmr.no
+ *
+ * Permission to use, copy, modify, distribute and sell this software
+ * and its documentation for any purpose is hereby granted without fee,
+ * provided that the above copyright notice appear in all copies and
+ * that both that copyright notice and this permission notice appear
+ * in supporting documentation.  Christian Michelsen Research AS makes no
+ * representations about the suitability of this software for any
+ * purpose.  It is provided "as is" without express or implied warranty.
+ *
+ */
+
+#ifndef ZSTREAM__H
+#define ZSTREAM__H
+
+/*
+ * zstream.h - C++ interface to the 'zlib' general purpose compression library
+ * $Id: zstream.h 1.1 1997-06-25 12:00:56+02 tyge Exp tyge $
+ */
+
+#include <strstream.h>
+#include <string.h>
+#include <stdio.h>
+#include "zlib.h"
+
+#if defined(_WIN32)
+#   include <fcntl.h>
+#   include <io.h>
+#   define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+#   define SET_BINARY_MODE(file)
+#endif
+
+class zstringlen {
+public:
+    zstringlen(class izstream&);
+    zstringlen(class ozstream&, const char*);
+    size_t value() const { return val.word; }
+private:
+    struct Val { unsigned char byte; size_t word; } val;
+};
+
+//  ----------------------------- izstream -----------------------------
+
+class izstream
+{
+    public:
+        izstream() : m_fp(0) {}
+        izstream(FILE* fp) : m_fp(0) { open(fp); }
+        izstream(const char* name) : m_fp(0) { open(name); }
+        ~izstream() { close(); }
+
+        /* Opens a gzip (.gz) file for reading.
+         * open() can be used to read a file which is not in gzip format;
+         * in this case read() will directly read from the file without
+         * decompression. errno can be checked to distinguish two error
+         * cases (if errno is zero, the zlib error is Z_MEM_ERROR).
+         */
+        void open(const char* name) {
+            if (m_fp) close();
+            m_fp = ::gzopen(name, "rb");
+        }
+
+        void open(FILE* fp) {
+            SET_BINARY_MODE(fp);
+            if (m_fp) close();
+            m_fp = ::gzdopen(fileno(fp), "rb");
+        }
+
+        /* Flushes all pending input if necessary, closes the compressed file
+         * and deallocates all the (de)compression state. The return value is
+         * the zlib error number (see function error() below).
+         */
+        int close() {
+            int r = ::gzclose(m_fp);
+            m_fp = 0; return r;
+        }
+
+        /* Binary read the given number of bytes from the compressed file.
+         */
+        int read(void* buf, size_t len) {
+            return ::gzread(m_fp, buf, len);
+        }
+
+        /* Returns the error message for the last error which occurred on the
+         * given compressed file. errnum is set to zlib error number. If an
+         * error occurred in the file system and not in the compression library,
+         * errnum is set to Z_ERRNO and the application may consult errno
+         * to get the exact error code.
+         */
+        const char* error(int* errnum) {
+            return ::gzerror(m_fp, errnum);
+        }
+
+        gzFile fp() { return m_fp; }
+
+    private:
+        gzFile m_fp;
+};
+
+/*
+ * Binary read the given (array of) object(s) from the compressed file.
+ * If the input file was not in gzip format, read() copies the objects number
+ * of bytes into the buffer.
+ * returns the number of uncompressed bytes actually read
+ * (0 for end of file, -1 for error).
+ */
+template <class T, class Items>
+inline int read(izstream& zs, T* x, Items items) {
+    return ::gzread(zs.fp(), x, items*sizeof(T));
+}
+
+/*
+ * Binary input with the '>' operator.
+ */
+template <class T>
+inline izstream& operator>(izstream& zs, T& x) {
+    ::gzread(zs.fp(), &x, sizeof(T));
+    return zs;
+}
+
+
+inline zstringlen::zstringlen(izstream& zs) {
+    zs > val.byte;
+    if (val.byte == 255) zs > val.word;
+    else val.word = val.byte;
+}
+
+/*
+ * Read length of string + the string with the '>' operator.
+ */
+inline izstream& operator>(izstream& zs, char* x) {
+    zstringlen len(zs);
+    ::gzread(zs.fp(), x, len.value());
+    x[len.value()] = '\0';
+    return zs;
+}
+
+inline char* read_string(izstream& zs) {
+    zstringlen len(zs);
+    char* x = new char[len.value()+1];
+    ::gzread(zs.fp(), x, len.value());
+    x[len.value()] = '\0';
+    return x;
+}
+
+// ----------------------------- ozstream -----------------------------
+
+class ozstream
+{
+    public:
+        ozstream() : m_fp(0), m_os(0) {
+        }
+        ozstream(FILE* fp, int level = Z_DEFAULT_COMPRESSION)
+            : m_fp(0), m_os(0) {
+            open(fp, level);
+        }
+        ozstream(const char* name, int level = Z_DEFAULT_COMPRESSION)
+            : m_fp(0), m_os(0) {
+            open(name, level);
+        }
+        ~ozstream() {
+            close();
+        }
+
+        /* Opens a gzip (.gz) file for writing.
+         * The compression level parameter should be in 0..9
+         * errno can be checked to distinguish two error cases
+         * (if errno is zero, the zlib error is Z_MEM_ERROR).
+         */
+        void open(const char* name, int level = Z_DEFAULT_COMPRESSION) {
+            char mode[4] = "wb\0";
+            if (level != Z_DEFAULT_COMPRESSION) mode[2] = '0'+level;
+            if (m_fp) close();
+            m_fp = ::gzopen(name, mode);
+        }
+
+        /* open from a FILE pointer.
+         */
+        void open(FILE* fp, int level = Z_DEFAULT_COMPRESSION) {
+            SET_BINARY_MODE(fp);
+            char mode[4] = "wb\0";
+            if (level != Z_DEFAULT_COMPRESSION) mode[2] = '0'+level;
+            if (m_fp) close();
+            m_fp = ::gzdopen(fileno(fp), mode);
+        }
+
+        /* Flushes all pending output if necessary, closes the compressed file
+         * and deallocates all the (de)compression state. The return value is
+         * the zlib error number (see function error() below).
+         */
+        int close() {
+            if (m_os) {
+                ::gzwrite(m_fp, m_os->str(), m_os->pcount());
+                delete[] m_os->str(); delete m_os; m_os = 0;
+            }
+            int r = ::gzclose(m_fp); m_fp = 0; return r;
+        }
+
+        /* Binary write the given number of bytes into the compressed file.
+         */
+        int write(const void* buf, size_t len) {
+            return ::gzwrite(m_fp, (voidp) buf, len);
+        }
+
+        /* Flushes all pending output into the compressed file. The parameter
+         * _flush is as in the deflate() function. The return value is the zlib
+         * error number (see function gzerror below). flush() returns Z_OK if
+         * the flush_ parameter is Z_FINISH and all output could be flushed.
+         * flush() should be called only when strictly necessary because it can
+         * degrade compression.
+         */
+        int flush(int _flush) {
+            os_flush();
+            return ::gzflush(m_fp, _flush);
+        }
+
+        /* Returns the error message for the last error which occurred on the
+         * given compressed file. errnum is set to zlib error number. If an
+         * error occurred in the file system and not in the compression library,
+         * errnum is set to Z_ERRNO and the application may consult errno
+         * to get the exact error code.
+         */
+        const char* error(int* errnum) {
+            return ::gzerror(m_fp, errnum);
+        }
+
+        gzFile fp() { return m_fp; }
+
+        ostream& os() {
+            if (m_os == 0) m_os = new ostrstream;
+            return *m_os;
+        }
+
+        void os_flush() {
+            if (m_os && m_os->pcount()>0) {
+                ostrstream* oss = new ostrstream;
+                oss->fill(m_os->fill());
+                oss->flags(m_os->flags());
+                oss->precision(m_os->precision());
+                oss->width(m_os->width());
+                ::gzwrite(m_fp, m_os->str(), m_os->pcount());
+                delete[] m_os->str(); delete m_os; m_os = oss;
+            }
+        }
+
+    private:
+        gzFile m_fp;
+        ostrstream* m_os;
+};
+
+/*
+ * Binary write the given (array of) object(s) into the compressed file.
+ * returns the number of uncompressed bytes actually written
+ * (0 in case of error).
+ */
+template <class T, class Items>
+inline int write(ozstream& zs, const T* x, Items items) {
+    return ::gzwrite(zs.fp(), (voidp) x, items*sizeof(T));
+}
+
+/*
+ * Binary output with the '<' operator.
+ */
+template <class T>
+inline ozstream& operator<(ozstream& zs, const T& x) {
+    ::gzwrite(zs.fp(), (voidp) &x, sizeof(T));
+    return zs;
+}
+
+inline zstringlen::zstringlen(ozstream& zs, const char* x) {
+    val.byte = 255;  val.word = ::strlen(x);
+    if (val.word < 255) zs < (val.byte = val.word);
+    else zs < val;
+}
+
+/*
+ * Write length of string + the string with the '<' operator.
+ */
+inline ozstream& operator<(ozstream& zs, const char* x) {
+    zstringlen len(zs, x);
+    ::gzwrite(zs.fp(), (voidp) x, len.value());
+    return zs;
+}
+
+#ifdef _MSC_VER
+inline ozstream& operator<(ozstream& zs, char* const& x) {
+    return zs < (const char*) x;
+}
+#endif
+
+/*
+ * Ascii write with the << operator;
+ */
+template <class T>
+inline ostream& operator<<(ozstream& zs, const T& x) {
+    zs.os_flush();
+    return zs.os() << x;
+}
+
+#endif

contrib/iostream2/zstream_test.cpp

@@ -0,0 +1,25 @@
+#include "zstream.h"
+#include <math.h>
+#include <stdlib.h>
+#include <iomanip.h>
+
+void main() {
+	char h[256] = "Hello";
+	char* g = "Goodbye";
+	ozstream out("temp.gz");
+    out < "This works well" < h < g;
+    out.close();
+
+    izstream in("temp.gz"); // read it back
+    char *x = read_string(in), *y = new char[256], z[256];
+    in > y > z;
+    in.close();
+    cout << x << endl << y << endl << z << endl;
+
+    out.open("temp.gz"); // try ascii output; zcat temp.gz to see the results
+    out << setw(50) << setfill('#') << setprecision(20) << x << endl << y << endl << z << endl;
+    out << z << endl << y << endl << x << endl;
+    out << 1.1234567890123456789 << endl;
+
+    delete[] x; delete[] y;
+}

contrib/minizip/ChangeLogUnzip

@@ -0,0 +1,38 @@
+Change in 0.15: (19 Mar 98)
+- fix memory leak in minizip.c
+
+Change in 0.14: (10 Mar 98)
+- fix bugs in minizip.c sample for zipping big file
+- fix problem in month in date handling
+- fix bug in unzlocal_GetCurrentFileInfoInternal in unzip.c for 
+    comment handling
+
+Change in 0.13: (6 Mar 98)
+- fix bugs in zip.c
+- add real minizip sample
+
+Change in 0.12: (4 Mar 98)
+- add zip.c and zip.h for creates .zip file
+- fix change_file_date in miniunz.c for Unix (Jean-loup Gailly)
+- fix miniunz.c for file without specific record for directory
+
+Change in 0.11: (3 Mar 98)
+- fix bug in unzGetCurrentFileInfo for get extra field and comment
+- enhance miniunz sample, remove the bad unztst.c sample
+
+Change in 0.10: (2 Mar 98)
+- fix bug in unzReadCurrentFile
+- rename unzip* to unz* function and structure
+- remove Windows-like hungary notation variable name
+- modify some structure in unzip.h
+- add somes comment in source
+- remove unzipGetcCurrentFile function
+- replace ZUNZEXPORT by ZEXPORT
+- add unzGetLocalExtrafield for get the local extrafield info
+- add a new sample, miniunz.c
+
+Change in 0.4: (25 Feb 98)
+- suppress the type unzipFileInZip. 
+  Only on file in the zipfile can be open at the same time
+- fix somes typo in code
+- added tm_unz structure in unzip_file_info (date/time in readable format)

contrib/minizip/Makefile

@@ -0,0 +1,25 @@
+CC=cc
+CFLAGS=-O -I../..
+
+UNZ_OBJS = miniunz.o unzip.o ../../libz.a
+ZIP_OBJS = minizip.o zip.o   ../../libz.a
+
+.c.o:
+	$(CC) -c $(CFLAGS) $*.c
+
+all: miniunz minizip
+
+miniunz:  $(UNZ_OBJS)
+	$(CC) $(CFLAGS) -o $@ $(UNZ_OBJS)
+
+minizip:  $(ZIP_OBJS)
+	$(CC) $(CFLAGS) -o $@ $(ZIP_OBJS)
+
+test:	miniunz minizip
+	./minizip test readme.txt
+	./miniunz -l test.zip
+	mv readme.txt readme.old
+	./miniunz test.zip
+
+clean:
+	/bin/rm -f *.o *~ minizip miniunz

contrib/minizip/miniunz.c

@@ -0,0 +1,508 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <errno.h>
+#include <fcntl.h>
+
+#ifdef unix
+# include <unistd.h>
+# include <utime.h>
+#else
+# include <direct.h>
+# include <io.h>
+#endif
+
+#include "unzip.h"
+
+#define CASESENSITIVITY (0)
+#define WRITEBUFFERSIZE (8192)
+
+/*
+  mini unzip, demo of unzip package
+
+  usage :
+  Usage : miniunz [-exvlo] file.zip [file_to_extract]
+
+  list the file in the zipfile, and print the content of FILE_ID.ZIP or README.TXT
+    if it exists
+*/
+
+
+/* change_file_date : change the date/time of a file
+    filename : the filename of the file where date/time must be modified
+    dosdate : the new date at the MSDos format (4 bytes)
+    tmu_date : the SAME new date at the tm_unz format */
+void change_file_date(filename,dosdate,tmu_date)
+	const char *filename;
+	uLong dosdate;
+	tm_unz tmu_date;
+{
+#ifdef WIN32
+  HANDLE hFile;
+  FILETIME ftm,ftLocal,ftCreate,ftLastAcc,ftLastWrite;
+
+  hFile = CreateFile(filename,GENERIC_READ | GENERIC_WRITE,
+                      0,NULL,OPEN_EXISTING,0,NULL);
+  GetFileTime(hFile,&ftCreate,&ftLastAcc,&ftLastWrite);
+  DosDateTimeToFileTime((WORD)(dosdate>>16),(WORD)dosdate,&ftLocal);
+  LocalFileTimeToFileTime(&ftLocal,&ftm);
+  SetFileTime(hFile,&ftm,&ftLastAcc,&ftm);
+  CloseHandle(hFile);
+#else
+#ifdef unix
+  struct utimbuf ut;
+  struct tm newdate;
+  newdate.tm_sec = tmu_date.tm_sec;
+  newdate.tm_min=tmu_date.tm_min;
+  newdate.tm_hour=tmu_date.tm_hour;
+  newdate.tm_mday=tmu_date.tm_mday;
+  newdate.tm_mon=tmu_date.tm_mon;
+  if (tmu_date.tm_year > 1900)
+      newdate.tm_year=tmu_date.tm_year - 1900;
+  else
+      newdate.tm_year=tmu_date.tm_year ;
+  newdate.tm_isdst=-1;
+
+  ut.actime=ut.modtime=mktime(&newdate);
+  utime(filename,&ut);
+#endif
+#endif
+}
+
+
+/* mymkdir and change_file_date are not 100 % portable
+   As I don't know well Unix, I wait feedback for the unix portion */
+
+int mymkdir(dirname)
+	const char* dirname;
+{
+    int ret=0;
+#ifdef WIN32
+	ret = mkdir(dirname);
+#else
+#ifdef unix
+	ret = mkdir (dirname,0775);
+#endif
+#endif
+	return ret;
+}
+
+int makedir (newdir)
+    char *newdir;
+{
+  char *buffer ;
+  char *p;
+  int  len = strlen(newdir);  
+
+  if (len <= 0) 
+    return 0;
+
+  buffer = (char*)malloc(len+1);
+  strcpy(buffer,newdir);
+  
+  if (buffer[len-1] == '/') {
+    buffer[len-1] = '\0';
+  }
+  if (mymkdir(buffer) == 0)
+    {
+      free(buffer);
+      return 1;
+    }
+
+  p = buffer+1;
+  while (1)
+    {
+      char hold;
+
+      while(*p && *p != '\\' && *p != '/')
+        p++;
+      hold = *p;
+      *p = 0;
+      if ((mymkdir(buffer) == -1) && (errno == ENOENT))
+        {
+          printf("couldn't create directory %s\n",buffer);
+          free(buffer);
+          return 0;
+        }
+      if (hold == 0)
+        break;
+      *p++ = hold;
+    }
+  free(buffer);
+  return 1;
+}
+
+void do_banner()
+{
+	printf("MiniUnz 0.15, demo of zLib + Unz package written by Gilles Vollant\n");
+	printf("more info at http://wwww.winimage/zLibDll/unzip.htm\n\n");
+}
+
+void do_help()
+{	
+	printf("Usage : miniunz [-exvlo] file.zip [file_to_extract]\n\n") ;
+}
+
+
+int do_list(uf)
+	unzFile uf;
+{
+	uLong i;
+	unz_global_info gi;
+	int err;
+
+	err = unzGetGlobalInfo (uf,&gi);
+	if (err!=UNZ_OK)
+		printf("error %d with zipfile in unzGetGlobalInfo \n",err);
+    printf(" Length  Method   Size  Ratio   Date    Time   CRC-32     Name\n");
+    printf(" ------  ------   ----  -----   ----    ----   ------     ----\n");
+	for (i=0;i<gi.number_entry;i++)
+	{
+		char filename_inzip[256];
+		unz_file_info file_info;
+		uLong ratio=0;
+		const char *string_method;
+		err = unzGetCurrentFileInfo(uf,&file_info,filename_inzip,sizeof(filename_inzip),NULL,0,NULL,0);
+		if (err!=UNZ_OK)
+		{
+			printf("error %d with zipfile in unzGetCurrentFileInfo\n",err);
+			break;
+		}
+		if (file_info.uncompressed_size>0)
+			ratio = (file_info.compressed_size*100)/file_info.uncompressed_size;
+
+		if (file_info.compression_method==0)
+			string_method="Stored";
+		else
+		if (file_info.compression_method==Z_DEFLATED)
+		{
+			uInt iLevel=(uInt)((file_info.flag & 0x6)/2);
+			if (iLevel==0)
+			  string_method="Defl:N";
+			else if (iLevel==1)
+			  string_method="Defl:X";
+			else if ((iLevel==2) || (iLevel==3))
+			  string_method="Defl:F"; /* 2:fast , 3 : extra fast*/
+		}
+		else
+			string_method="Unkn. ";
+
+		printf("%7lu  %6s %7lu %3lu%%  %2.2lu-%2.2lu-%2.2lu  %2.2lu:%2.2lu  %8.8lx   %s\n",
+			    file_info.uncompressed_size,string_method,file_info.compressed_size,
+				ratio,
+				(uLong)file_info.tmu_date.tm_mon + 1,
+                (uLong)file_info.tmu_date.tm_mday,
+				(uLong)file_info.tmu_date.tm_year % 100,
+				(uLong)file_info.tmu_date.tm_hour,(uLong)file_info.tmu_date.tm_min,
+				(uLong)file_info.crc,filename_inzip);
+		if ((i+1)<gi.number_entry)
+		{
+			err = unzGoToNextFile(uf);
+			if (err!=UNZ_OK)
+			{
+				printf("error %d with zipfile in unzGoToNextFile\n",err);
+				break;
+			}
+		}
+	}
+
+	return 0;
+}
+
+
+int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite)
+	unzFile uf;
+	const int* popt_extract_without_path;
+    int* popt_overwrite;
+{
+	char filename_inzip[256];
+	char* filename_withoutpath;
+	char* p;
+    int err=UNZ_OK;
+    FILE *fout=NULL;
+    void* buf;
+    uInt size_buf;
+	
+	unz_file_info file_info;
+	uLong ratio=0;
+	err = unzGetCurrentFileInfo(uf,&file_info,filename_inzip,sizeof(filename_inzip),NULL,0,NULL,0);
+
+	if (err!=UNZ_OK)
+	{
+		printf("error %d with zipfile in unzGetCurrentFileInfo\n",err);
+		return err;
+	}
+
+    size_buf = WRITEBUFFERSIZE;
+    buf = (void*)malloc(size_buf);
+    if (buf==NULL)
+    {
+        printf("Error allocating memory\n");
+        return UNZ_INTERNALERROR;
+    }
+
+	p = filename_withoutpath = filename_inzip;
+	while ((*p) != '\0')
+	{
+		if (((*p)=='/') || ((*p)=='\\'))
+			filename_withoutpath = p+1;
+		p++;
+	}
+
+	if ((*filename_withoutpath)=='\0')
+	{
+		if ((*popt_extract_without_path)==0)
+		{
+			printf("creating directory: %s\n",filename_inzip);
+			mymkdir(filename_inzip);
+		}
+	}
+	else
+	{
+		const char* write_filename;
+		int skip=0;
+
+		if ((*popt_extract_without_path)==0)
+			write_filename = filename_inzip;
+		else
+			write_filename = filename_withoutpath;
+
+		err = unzOpenCurrentFile(uf);
+		if (err!=UNZ_OK)
+		{
+			printf("error %d with zipfile in unzOpenCurrentFile\n",err);
+		}
+
+		if (((*popt_overwrite)==0) && (err==UNZ_OK))
+		{
+			char rep;
+			FILE* ftestexist;
+			ftestexist = fopen(write_filename,"rb");
+			if (ftestexist!=NULL)
+			{
+				fclose(ftestexist);
+				do
+				{
+					char answer[128];
+					printf("The file %s exist. Overwrite ? [y]es, [n]o, [A]ll: ",write_filename);
+					scanf("%1s",answer);
+					rep = answer[0] ;
+					if ((rep>='a') && (rep<='z'))
+						rep -= 0x20;
+				}
+				while ((rep!='Y') && (rep!='N') && (rep!='A'));
+			}
+
+			if (rep == 'N')
+				skip = 1;
+
+			if (rep == 'A')
+				*popt_overwrite=1;
+		}
+
+		if ((skip==0) && (err==UNZ_OK))
+		{
+			fout=fopen(write_filename,"wb");
+
+            /* some zipfile don't contain directory alone before file */
+            if ((fout==NULL) && ((*popt_extract_without_path)==0) && 
+                                (filename_withoutpath!=(char*)filename_inzip))
+            {
+                char c=*(filename_withoutpath-1);
+                *(filename_withoutpath-1)='\0';
+                makedir(write_filename);
+                *(filename_withoutpath-1)=c;
+                fout=fopen(write_filename,"wb");
+            }
+
+			if (fout==NULL)
+			{
+				printf("error opening %s\n",write_filename);
+			}
+		}
+
+		if (fout!=NULL)
+		{
+			printf(" extracting: %s\n",write_filename);
+
+			do
+			{
+				err = unzReadCurrentFile(uf,buf,size_buf);
+				if (err<0)	
+				{
+					printf("error %d with zipfile in unzReadCurrentFile\n",err);
+					break;
+				}
+				if (err>0)
+					if (fwrite(buf,err,1,fout)!=1)
+					{
+						printf("error in writing extracted file\n");
+                        err=UNZ_ERRNO;
+						break;
+					}
+			}
+			while (err>0);
+			fclose(fout);
+			if (err==0) 
+				change_file_date(write_filename,file_info.dosDate,
+					             file_info.tmu_date);
+		}
+
+        if (err==UNZ_OK)
+        {
+		    err = unzCloseCurrentFile (uf);
+		    if (err!=UNZ_OK)
+		    {
+			    printf("error %d with zipfile in unzCloseCurrentFile\n",err);
+		    }
+        }
+        else
+            unzCloseCurrentFile(uf); /* don't lose the error */       
+	}
+
+    free(buf);    
+    return err;
+}
+
+
+int do_extract(uf,opt_extract_without_path,opt_overwrite)
+	unzFile uf;
+	int opt_extract_without_path;
+    int opt_overwrite;
+{
+	uLong i;
+	unz_global_info gi;
+	int err;
+	FILE* fout=NULL;	
+
+	err = unzGetGlobalInfo (uf,&gi);
+	if (err!=UNZ_OK)
+		printf("error %d with zipfile in unzGetGlobalInfo \n",err);
+
+	for (i=0;i<gi.number_entry;i++)
+	{
+        if (do_extract_currentfile(uf,&opt_extract_without_path,
+                                      &opt_overwrite) != UNZ_OK)
+            break;
+
+		if ((i+1)<gi.number_entry)
+		{
+			err = unzGoToNextFile(uf);
+			if (err!=UNZ_OK)
+			{
+				printf("error %d with zipfile in unzGoToNextFile\n",err);
+				break;
+			}
+		}
+	}
+
+	return 0;
+}
+
+int do_extract_onefile(uf,filename,opt_extract_without_path,opt_overwrite)
+	unzFile uf;
+	const char* filename;
+	int opt_extract_without_path;
+    int opt_overwrite;
+{
+    int err = UNZ_OK;
+    if (unzLocateFile(uf,filename,CASESENSITIVITY)!=UNZ_OK)
+    {
+        printf("file %s not found in the zipfile\n",filename);
+        return 2;
+    }
+
+    if (do_extract_currentfile(uf,&opt_extract_without_path,
+                                      &opt_overwrite) == UNZ_OK)
+        return 0;
+    else
+        return 1;
+}
+
+
+int main(argc,argv)
+	int argc;
+	char *argv[];
+{
+	const char *zipfilename=NULL;
+    const char *filename_to_extract=NULL;
+	int i;
+	int opt_do_list=0;
+	int opt_do_extract=1;
+	int opt_do_extract_withoutpath=0;
+	int opt_overwrite=0;
+	char filename_try[512];
+	unzFile uf=NULL;
+
+	do_banner();
+	if (argc==1)
+	{
+		do_help();
+		exit(0);
+	}
+	else
+	{
+		for (i=1;i<argc;i++)
+		{
+			if ((*argv[i])=='-')
+			{
+				const char *p=argv[i]+1;
+				
+				while ((*p)!='\0')
+				{			
+					char c=*(p++);;
+					if ((c=='l') || (c=='L'))
+						opt_do_list = 1;
+					if ((c=='v') || (c=='V'))
+						opt_do_list = 1;
+					if ((c=='x') || (c=='X'))
+						opt_do_extract = 1;
+					if ((c=='e') || (c=='E'))
+						opt_do_extract = opt_do_extract_withoutpath = 1;
+					if ((c=='o') || (c=='O'))
+						opt_overwrite=1;
+				}
+			}
+			else
+            {
+				if (zipfilename == NULL)
+					zipfilename = argv[i];
+                else if (filename_to_extract==NULL)
+                        filename_to_extract = argv[i] ;
+            }
+		}
+	}
+
+	if (zipfilename!=NULL)
+	{
+		strcpy(filename_try,zipfilename);
+		uf = unzOpen(zipfilename);
+		if (uf==NULL)
+		{
+			strcat(filename_try,".zip");
+			uf = unzOpen(filename_try);
+		}
+	}
+
+	if (uf==NULL)
+	{
+		printf("Cannot open %s or %s.zip\n",zipfilename,zipfilename);
+		exit (1);
+	}
+    printf("%s opened\n",filename_try);
+
+	if (opt_do_list==1)
+		return do_list(uf);
+	else if (opt_do_extract==1)
+    {
+        if (filename_to_extract == NULL)
+		    return do_extract(uf,opt_do_extract_withoutpath,opt_overwrite);
+        else
+            return do_extract_onefile(uf,filename_to_extract,
+                                      opt_do_extract_withoutpath,opt_overwrite);
+    }
+	unzCloseCurrentFile(uf);
+
+	return 0;  /* to avoid warning */
+}

contrib/minizip/minizip.c

@@ -0,0 +1,302 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <errno.h>
+#include <fcntl.h>
+
+#ifdef unix
+# include <unistd.h>
+# include <utime.h>
+# include <sys/types.h>
+# include <sys/stat.h>
+#else
+# include <direct.h>
+# include <io.h>
+#endif
+
+#include "zip.h"
+
+
+#define WRITEBUFFERSIZE (16384)
+#define MAXFILENAME (256)
+
+#ifdef WIN32
+uLong filetime(f, tmzip, dt)
+    char *f;                /* name of file to get info on */
+    tm_zip *tmzip;             /* return value: access, modific. and creation times */
+    uLong *dt;             /* dostime */
+{
+  int ret = 0;
+  {
+      FILETIME ftLocal;
+      HANDLE hFind;
+      WIN32_FIND_DATA  ff32;
+
+      hFind = FindFirstFile(f,&ff32);
+      if (hFind != INVALID_HANDLE_VALUE)
+      {
+        FileTimeToLocalFileTime(&(ff32.ftLastWriteTime),&ftLocal);
+        FileTimeToDosDateTime(&ftLocal,((LPWORD)dt)+1,((LPWORD)dt)+0);
+        FindClose(hFind);
+        ret = 1;
+      }
+  }
+  return ret;
+}
+#else
+#ifdef unix
+uLong filetime(f, tmzip, dt)
+    char *f;                /* name of file to get info on */
+    tm_zip *tmzip;             /* return value: access, modific. and creation times */
+    uLong *dt;             /* dostime */
+{
+  int ret=0;
+  struct stat s;        /* results of stat() */
+  struct tm* filedate;
+  time_t tm_t=0;
+  
+  if (strcmp(f,"-")!=0)
+  {
+    char name[MAXFILENAME];
+    int len = strlen(f);
+    strcpy(name, f);
+    if (name[len - 1] == '/')
+      name[len - 1] = '\0';
+    /* not all systems allow stat'ing a file with / appended */
+    if (stat(name,&s)==0)
+    {
+      tm_t = s.st_mtime;
+      ret = 1;
+    }
+  }
+  filedate = localtime(&tm_t);
+
+  tmzip->tm_sec  = filedate->tm_sec;
+  tmzip->tm_min  = filedate->tm_min;
+  tmzip->tm_hour = filedate->tm_hour;
+  tmzip->tm_mday = filedate->tm_mday;
+  tmzip->tm_mon  = filedate->tm_mon ;
+  tmzip->tm_year = filedate->tm_year;
+
+  return ret;
+}
+#else
+uLong filetime(f, tmzip, dt)
+    char *f;                /* name of file to get info on */
+    tm_zip *tmzip;             /* return value: access, modific. and creation times */
+    uLong *dt;             /* dostime */
+{
+    return 0;
+}
+#endif
+#endif
+
+
+
+
+int check_exist_file(filename)
+    const char* filename;
+{
+	FILE* ftestexist;
+    int ret = 1;
+	ftestexist = fopen(filename,"rb");
+	if (ftestexist==NULL)
+        ret = 0;
+    else
+        fclose(ftestexist);
+    return ret;
+}
+
+void do_banner()
+{
+	printf("MiniZip 0.15, demo of zLib + Zip package written by Gilles Vollant\n");
+	printf("more info at http://wwww.winimage/zLibDll/unzip.htm\n\n");
+}
+
+void do_help()
+{	
+	printf("Usage : minizip [-o] file.zip [files_to_add]\n\n") ;
+}
+
+int main(argc,argv)
+	int argc;
+	char *argv[];
+{
+	int i;
+	int opt_overwrite=0;
+    int opt_compress_level=Z_DEFAULT_COMPRESSION;
+    int zipfilenamearg = 0;
+	char filename_try[MAXFILENAME];
+    int zipok;
+    int err=0;
+    int size_buf=0;
+    void* buf=NULL,
+
+
+	do_banner();
+	if (argc==1)
+	{
+		do_help();
+		exit(0);
+        return 0;
+	}
+	else
+	{
+		for (i=1;i<argc;i++)
+		{
+			if ((*argv[i])=='-')
+			{
+				const char *p=argv[i]+1;
+				
+				while ((*p)!='\0')
+				{			
+					char c=*(p++);;
+					if ((c=='o') || (c=='O'))
+						opt_overwrite = 1;
+                    if ((c>='0') && (c<='9'))
+                        opt_compress_level = c-'0';
+				}
+			}
+			else
+				if (zipfilenamearg == 0)
+                    zipfilenamearg = i ;
+		}
+	}
+
+    size_buf = WRITEBUFFERSIZE;
+    buf = (void*)malloc(size_buf);
+    if (buf==NULL)
+    {
+        printf("Error allocating memory\n");
+        return ZIP_INTERNALERROR;
+    }
+
+	if (zipfilenamearg==0)
+        zipok=0;
+    else
+	{
+        int i,len;
+        int dot_found=0;
+
+        zipok = 1 ;
+		strcpy(filename_try,argv[zipfilenamearg]);
+        len=strlen(filename_try);
+        for (i=0;i<len;i++)
+            if (filename_try[i]=='.')
+                dot_found=1;
+
+        if (dot_found==0)
+            strcat(filename_try,".zip");
+
+        if (opt_overwrite==0)
+            if (check_exist_file(filename_try)!=0)
+			{
+                char rep;
+				do
+				{
+					char answer[128];
+					printf("The file %s exist. Overwrite ? [y]es, [n]o : ",filename_try);
+					scanf("%1s",answer);
+					rep = answer[0] ;
+					if ((rep>='a') && (rep<='z'))
+						rep -= 0x20;
+				}
+				while ((rep!='Y') && (rep!='N'));
+                if (rep=='N')
+                    zipok = 0;
+			}
+    }
+
+    if (zipok==1)
+    {
+        zipFile zf;
+        int errclose;
+        zf = zipOpen(filename_try,0);
+        if (zf == NULL)
+        {
+            printf("error opening %s\n",filename_try);
+            err= ZIP_ERRNO;
+        }
+        else 
+            printf("creating %s\n",filename_try);
+
+        for (i=zipfilenamearg+1;(i<argc) && (err==ZIP_OK);i++)
+        {
+            if (((*(argv[i]))!='-') && ((*(argv[i]))!='/'))
+            {
+                FILE * fin;
+                int size_read;
+                const char* filenameinzip = argv[i];
+                zip_fileinfo zi;
+
+                zi.tmz_date.tm_sec = zi.tmz_date.tm_min = zi.tmz_date.tm_hour = 
+                zi.tmz_date.tm_mday = zi.tmz_date.tm_min = zi.tmz_date.tm_year = 0;
+                zi.dosDate = 0;
+                zi.internal_fa = 0;
+                zi.external_fa = 0;
+                filetime(filenameinzip,&zi.tmz_date,&zi.dosDate);
+
+
+                err = zipOpenNewFileInZip(zf,filenameinzip,&zi,
+                                 NULL,0,NULL,0,NULL /* comment*/,
+                                 (opt_compress_level != 0) ? Z_DEFLATED : 0,
+                                 opt_compress_level);
+
+                if (err != ZIP_OK)
+                    printf("error in opening %s in zipfile\n",filenameinzip);
+                else
+                {
+                    fin = fopen(filenameinzip,"rb");
+                    if (fin==NULL)
+                    {
+                        err=ZIP_ERRNO;
+                        printf("error in opening %s for reading\n",filenameinzip);
+                    }
+                }
+
+                if (err == ZIP_OK)
+                    do
+                    {
+                        err = ZIP_OK;
+                        size_read = fread(buf,1,size_buf,fin);
+                        if (size_read < size_buf)
+                            if (feof(fin)==0)
+                        {
+                            printf("error in reading %s\n",filenameinzip);
+                            err = ZIP_ERRNO;
+                        }
+
+                        if (size_read>0)
+                        {
+                            err = zipWriteInFileInZip (zf,buf,size_read);
+                            if (err<0)
+                            {
+                                printf("error in writing %s in the zipfile\n",
+                                                 filenameinzip);
+                            }
+                                
+                        }
+                    } while ((err == ZIP_OK) && (size_read>0));
+
+                fclose(fin);
+                if (err<0)
+                    err=ZIP_ERRNO;
+                else
+                {                    
+                    err = zipCloseFileInZip(zf);
+                    if (err!=ZIP_OK)
+                        printf("error in closing %s in the zipfile\n",
+                                    filenameinzip);
+                }
+            }
+        }
+        errclose = zipClose(zf,NULL);
+        if (errclose != ZIP_OK)
+            printf("error in closing %s\n",filename_try);
+   }
+
+    free(buf);
+    exit(0);
+	return 0;  /* to avoid warning */
+}

contrib/minizip/readme.txt

@@ -0,0 +1,37 @@
+
+UnZip 0.15 additionnal library
+
+
+  This unzip package allow extract file from .ZIP file, compatible with 
+PKZip 2.04g, WinZip, InfoZip tools and compatible.
+
+  Multi volume ZipFile (span) are not supported, and old compression used by old 
+PKZip 1.x are not supported.
+
+See probdesc.zip from PKWare for specification of .ZIP format.
+
+What is Unzip
+  The Zlib library support the deflate compression and the creation of gzip (.gz) 
+file. Zlib is free and small.
+  The .Zip format, which can contain several compressed files (.gz can containt
+only one file) is a very popular format. This is why I've written a package for reading file compressed in Zipfile.
+
+Using Unzip package
+
+You need source of Zlib (get zlib111.zip and read zlib.h).
+Get unzlb015.zip and read unzip.h (whith documentation of unzip functions)
+
+The Unzip package is only two file : unzip.h and unzip.c. But it use the Zlib 
+  files.
+unztst.c is a simple sample program, which list file in a zipfile and display
+  README.TXT or FILE_ID.DIZ (if these files are found).
+miniunz.c is a mini unzip program.
+
+I'm also currenlyt writing a zipping portion (zip.h, zip.c and test with minizip.c)
+
+Please email me for feedback.
+I hope my source is compatible with Unix system, but I need your help for be sure
+
+Latest revision : Mar 04th, 1998
+
+Check http://www.winimage.com/zLibDll/unzip.html for up to date info.

contrib/minizip/unzip.def

@@ -0,0 +1,15 @@
+	unzOpen                       @61
+	unzClose                      @62
+	unzGetGlobalInfo              @63
+	unzGetCurrentFileInfo         @64
+	unzGoToFirstFile              @65
+	unzGoToNextFile               @66
+	unzOpenCurrentFile            @67
+	unzReadCurrentFile            @68
+	unztell                       @70
+	unzeof                        @71
+	unzCloseCurrentFile           @72
+	unzGetGlobalComment           @73
+	unzStringFileNameCompare      @74
+	unzLocateFile                 @75
+	unzGetLocalExtrafield         @76

contrib/minizip/unzip.h

@@ -0,0 +1,275 @@
+/* unzip.h -- IO for uncompress .zip files using zlib 
+   Version 0.15 beta, Mar 19th, 1998,
+
+   Copyright (C) 1998 Gilles Vollant
+
+   This unzip package allow extract file from .ZIP file, compatible with PKZip 2.04g
+     WinZip, InfoZip tools and compatible.
+   Encryption and multi volume ZipFile (span) are not supported.
+   Old compressions used by old PKZip 1.x are not supported
+
+   THIS IS AN ALPHA VERSION. AT THIS STAGE OF DEVELOPPEMENT, SOMES API OR STRUCTURE
+   CAN CHANGE IN FUTURE VERSION !!
+   I WAIT FEEDBACK at mail info@winimage.com
+   Visit also http://www.winimage.com/zLibDll/unzip.htm for evolution
+
+   Condition of use and distribution are the same than zlib :
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+
+*/
+/* for more info about .ZIP format, see 
+      ftp://ftp.cdrom.com/pub/infozip/doc/appnote-970311-iz.zip
+   PkWare has also a specification at :
+      ftp://ftp.pkware.com/probdesc.zip */
+
+#ifndef _unz_H
+#define _unz_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef _ZLIB_H
+#include "zlib.h"
+#endif
+
+#if defined(STRICTUNZIP) || defined(STRICTZIPUNZIP)
+/* like the STRICT of WIN32, we define a pointer that cannot be converted
+    from (void*) without cast */
+typedef struct TagunzFile__ { int unused; } unzFile__; 
+typedef unzFile__ *unzFile;
+#else
+typedef voidp unzFile;
+#endif
+
+
+#define UNZ_OK                                  (0)
+#define UNZ_END_OF_LIST_OF_FILE (-100)
+#define UNZ_ERRNO               (Z_ERRNO)
+#define UNZ_EOF                 (0)
+#define UNZ_PARAMERROR                  (-102)
+#define UNZ_BADZIPFILE                  (-103)
+#define UNZ_INTERNALERROR               (-104)
+#define UNZ_CRCERROR                    (-105)
+
+/* tm_unz contain date/time info */
+typedef struct tm_unz_s 
+{
+	uInt tm_sec;            /* seconds after the minute - [0,59] */
+	uInt tm_min;            /* minutes after the hour - [0,59] */
+	uInt tm_hour;           /* hours since midnight - [0,23] */
+	uInt tm_mday;           /* day of the month - [1,31] */
+	uInt tm_mon;            /* months since January - [0,11] */
+	uInt tm_year;           /* years - [1980..2044] */
+} tm_unz;
+
+/* unz_global_info structure contain global data about the ZIPfile
+   These data comes from the end of central dir */
+typedef struct unz_global_info_s
+{
+	uLong number_entry;         /* total number of entries in
+				       the central dir on this disk */
+	uLong size_comment;         /* size of the global comment of the zipfile */
+} unz_global_info;
+
+
+/* unz_file_info contain information about a file in the zipfile */
+typedef struct unz_file_info_s
+{
+    uLong version;              /* version made by                 2 bytes */
+    uLong version_needed;       /* version needed to extract       2 bytes */
+    uLong flag;                 /* general purpose bit flag        2 bytes */
+    uLong compression_method;   /* compression method              2 bytes */
+    uLong dosDate;              /* last mod file date in Dos fmt   4 bytes */
+    uLong crc;                  /* crc-32                          4 bytes */
+    uLong compressed_size;      /* compressed size                 4 bytes */ 
+    uLong uncompressed_size;    /* uncompressed size               4 bytes */ 
+    uLong size_filename;        /* filename length                 2 bytes */
+    uLong size_file_extra;      /* extra field length              2 bytes */
+    uLong size_file_comment;    /* file comment length             2 bytes */
+
+    uLong disk_num_start;       /* disk number start               2 bytes */
+    uLong internal_fa;          /* internal file attributes        2 bytes */
+    uLong external_fa;          /* external file attributes        4 bytes */
+
+    tm_unz tmu_date;
+} unz_file_info;
+
+extern int ZEXPORT unzStringFileNameCompare OF ((const char* fileName1,
+												 const char* fileName2,
+												 int iCaseSensitivity));
+/*
+   Compare two filename (fileName1,fileName2).
+   If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp)
+   If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi
+								or strcasecmp)
+   If iCaseSenisivity = 0, case sensitivity is defaut of your operating system
+	(like 1 on Unix, 2 on Windows)
+*/
+
+
+extern unzFile ZEXPORT unzOpen OF((const char *path));
+/*
+  Open a Zip file. path contain the full pathname (by example,
+     on a Windows NT computer "c:\\zlib\\zlib111.zip" or on an Unix computer
+	 "zlib/zlib111.zip".
+	 If the zipfile cannot be opened (file don't exist or in not valid), the
+	   return value is NULL.
+     Else, the return value is a unzFile Handle, usable with other function
+	   of this unzip package.
+*/
+
+extern int ZEXPORT unzClose OF((unzFile file));
+/*
+  Close a ZipFile opened with unzipOpen.
+  If there is files inside the .Zip opened with unzOpenCurrentFile (see later),
+    these files MUST be closed with unzipCloseCurrentFile before call unzipClose.
+  return UNZ_OK if there is no problem. */
+
+extern int ZEXPORT unzGetGlobalInfo OF((unzFile file,
+					unz_global_info *pglobal_info));
+/*
+  Write info about the ZipFile in the *pglobal_info structure.
+  No preparation of the structure is needed
+  return UNZ_OK if there is no problem. */
+
+
+extern int ZEXPORT unzGetGlobalComment OF((unzFile file,
+										   char *szComment,
+					   uLong uSizeBuf));
+/*
+  Get the global comment string of the ZipFile, in the szComment buffer.
+  uSizeBuf is the size of the szComment buffer.
+  return the number of byte copied or an error code <0
+*/
+
+
+/***************************************************************************/
+/* Unzip package allow you browse the directory of the zipfile */
+
+extern int ZEXPORT unzGoToFirstFile OF((unzFile file));
+/*
+  Set the current file of the zipfile to the first file.
+  return UNZ_OK if there is no problem
+*/
+
+extern int ZEXPORT unzGoToNextFile OF((unzFile file));
+/*
+  Set the current file of the zipfile to the next file.
+  return UNZ_OK if there is no problem
+  return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest.
+*/
+
+extern int ZEXPORT unzLocateFile OF((unzFile file, 
+				     const char *szFileName,
+				     int iCaseSensitivity));
+/*
+  Try locate the file szFileName in the zipfile.
+  For the iCaseSensitivity signification, see unzStringFileNameCompare
+
+  return value :
+  UNZ_OK if the file is found. It becomes the current file.
+  UNZ_END_OF_LIST_OF_FILE if the file is not found
+*/
+
+
+extern int ZEXPORT unzGetCurrentFileInfo OF((unzFile file,
+					     unz_file_info *pfile_info,
+					     char *szFileName,
+					     uLong fileNameBufferSize,
+					     void *extraField,
+					     uLong extraFieldBufferSize,
+					     char *szComment,
+					     uLong commentBufferSize));
+/*
+  Get Info about the current file
+  if pfile_info!=NULL, the *pfile_info structure will contain somes info about
+	    the current file
+  if szFileName!=NULL, the filemane string will be copied in szFileName
+			(fileNameBufferSize is the size of the buffer)
+  if extraField!=NULL, the extra field information will be copied in extraField
+			(extraFieldBufferSize is the size of the buffer).
+			This is the Central-header version of the extra field
+  if szComment!=NULL, the comment string of the file will be copied in szComment
+			(commentBufferSize is the size of the buffer)
+*/
+
+/***************************************************************************/
+/* for reading the content of the current zipfile, you can open it, read data
+   from it, and close it (you can close it before reading all the file)
+   */
+
+extern int ZEXPORT unzOpenCurrentFile OF((unzFile file));
+/*
+  Open for reading data the current file in the zipfile.
+  If there is no error, the return value is UNZ_OK.
+*/
+
+extern int ZEXPORT unzCloseCurrentFile OF((unzFile file));
+/*
+  Close the file in zip opened with unzOpenCurrentFile
+  Return UNZ_CRCERROR if all the file was read but the CRC is not good
+*/
+
+												
+extern int ZEXPORT unzReadCurrentFile OF((unzFile file, 
+					  voidp buf,
+					  unsigned len));
+/*
+  Read bytes from the current file (opened by unzOpenCurrentFile)
+  buf contain buffer where data must be copied
+  len the size of buf.
+
+  return the number of byte copied if somes bytes are copied
+  return 0 if the end of file was reached
+  return <0 with error code if there is an error
+    (UNZ_ERRNO for IO error, or zLib error for uncompress error)
+*/
+
+extern z_off_t ZEXPORT unztell OF((unzFile file));
+/*
+  Give the current position in uncompressed data
+*/
+
+extern int ZEXPORT unzeof OF((unzFile file));
+/*
+  return 1 if the end of file was reached, 0 elsewhere 
+*/
+
+extern int ZEXPORT unzGetLocalExtrafield OF((unzFile file,
+											 voidp buf,
+											 unsigned len));
+/*
+  Read extra field from the current file (opened by unzOpenCurrentFile)
+  This is the local-header version of the extra field (sometimes, there is
+    more info in the local-header version than in the central-header)
+
+  if buf==NULL, it return the size of the local extra field
+
+  if buf!=NULL, len is the size of the buffer, the extra header is copied in
+	buf.
+  the return value is the number of bytes copied in buf, or (if <0) 
+	the error code
+*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _unz_H */

contrib/minizip/zip.c

@@ -0,0 +1,718 @@
+/* zip.c -- IO on .zip files using zlib 
+   Version 0.15 beta, Mar 19th, 1998,
+
+   Read zip.h for more info
+*/
+
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "zlib.h"
+#include "zip.h"
+
+#ifdef STDC
+#  include <stddef.h>
+#  include <string.h>
+#  include <stdlib.h>
+#endif
+#ifdef NO_ERRNO_H
+    extern int errno;
+#else
+#   include <errno.h>
+#endif
+
+
+#ifndef local
+#  define local static
+#endif
+/* compile with -Dlocal if your debugger can't find static symbols */
+
+#ifndef VERSIONMADEBY
+# define VERSIONMADEBY   (0x0) /* platform depedent */
+#endif
+
+#ifndef Z_BUFSIZE
+#define Z_BUFSIZE (16384)
+#endif
+
+#ifndef Z_MAXFILENAMEINZIP
+#define Z_MAXFILENAMEINZIP (256)
+#endif
+
+#ifndef ALLOC
+# define ALLOC(size) (malloc(size))
+#endif
+#ifndef TRYFREE
+# define TRYFREE(p) {if (p) free(p);}
+#endif
+
+/*
+#define SIZECENTRALDIRITEM (0x2e)
+#define SIZEZIPLOCALHEADER (0x1e)
+*/
+
+/* I've found an old Unix (a SunOS 4.1.3_U1) without all SEEK_* defined.... */
+
+#ifndef SEEK_CUR
+#define SEEK_CUR    1
+#endif
+
+#ifndef SEEK_END
+#define SEEK_END    2
+#endif
+
+#ifndef SEEK_SET
+#define SEEK_SET    0
+#endif
+
+const char zip_copyright[] =
+   " zip 0.15 Copyright 1998 Gilles Vollant ";
+
+
+#define SIZEDATA_INDATABLOCK (4096-(4*4))
+
+#define LOCALHEADERMAGIC    (0x04034b50)
+#define CENTRALHEADERMAGIC  (0x02014b50)
+#define ENDHEADERMAGIC      (0x06054b50)
+
+#define FLAG_LOCALHEADER_OFFSET (0x06)
+#define CRC_LOCALHEADER_OFFSET  (0x0e)
+
+#define SIZECENTRALHEADER (0x2e) /* 46 */
+
+typedef struct linkedlist_datablock_internal_s
+{
+  struct linkedlist_datablock_internal_s* next_datablock;
+  uLong  avail_in_this_block;
+  uLong  filled_in_this_block;
+  uLong  unused; /* for future use and alignement */
+  unsigned char data[SIZEDATA_INDATABLOCK];
+} linkedlist_datablock_internal;
+
+typedef struct linkedlist_data_s
+{
+    linkedlist_datablock_internal* first_block;
+    linkedlist_datablock_internal* last_block;
+} linkedlist_data;
+
+
+typedef struct
+{
+	z_stream stream;            /* zLib stream structure for inflate */
+    int  stream_initialised;    /* 1 is stream is initialised */
+    uInt pos_in_buffered_data;  /* last written byte in buffered_data */
+
+    uLong pos_local_header;     /* offset of the local header of the file 
+                                     currenty writing */
+    char* central_header;       /* central header data for the current file */
+    uLong size_centralheader;   /* size of the central header for cur file */
+    uLong flag;                 /* flag of the file currently writing */
+
+    int  method;                /* compression method of file currenty wr.*/
+    Byte buffered_data[Z_BUFSIZE];/* buffer contain compressed data to be writ*/
+    uLong dosDate;
+    uLong crc32;
+} curfile_info;
+
+typedef struct
+{
+    FILE * filezip;
+    linkedlist_data central_dir;/* datablock with central dir in construction*/
+    int  in_opened_file_inzip;  /* 1 if a file in the zip is currently writ.*/
+    curfile_info ci;            /* info on the file curretly writing */
+
+    uLong begin_pos;            /* position of the beginning of the zipfile */
+    uLong number_entry;
+} zip_internal;
+
+local linkedlist_datablock_internal* allocate_new_datablock()
+{
+    linkedlist_datablock_internal* ldi;
+    ldi = (linkedlist_datablock_internal*)
+                 ALLOC(sizeof(linkedlist_datablock_internal));
+    if (ldi!=NULL)
+    {
+        ldi->next_datablock = NULL ;
+        ldi->filled_in_this_block = 0 ;
+        ldi->avail_in_this_block = SIZEDATA_INDATABLOCK ;
+    }
+    return ldi;
+}
+
+local void free_datablock(ldi)
+    linkedlist_datablock_internal* ldi;
+{
+    while (ldi!=NULL)
+    {
+        linkedlist_datablock_internal* ldinext = ldi->next_datablock;
+        TRYFREE(ldi);
+        ldi = ldinext;
+    }
+}
+
+local void init_linkedlist(ll)
+    linkedlist_data* ll;
+{
+    ll->first_block = ll->last_block = NULL;
+}
+
+local void free_linkedlist(ll)
+    linkedlist_data* ll;
+{
+    free_datablock(ll->first_block);
+    ll->first_block = ll->last_block = NULL;
+}
+
+
+local int add_data_in_datablock(ll,buf,len)
+    linkedlist_data* ll;    
+    const void* buf;
+    uLong len;
+{
+    linkedlist_datablock_internal* ldi;
+    const unsigned char* from_copy;
+
+    if (ll==NULL)
+        return ZIP_INTERNALERROR;
+
+    if (ll->last_block == NULL)
+    {
+        ll->first_block = ll->last_block = allocate_new_datablock();
+        if (ll->first_block == NULL)
+            return ZIP_INTERNALERROR;
+    }
+
+    ldi = ll->last_block;
+    from_copy = (unsigned char*)buf;
+
+    while (len>0)
+    {
+        uInt copy_this;
+        uInt i;
+        unsigned char* to_copy;
+
+        if (ldi->avail_in_this_block==0)
+        {
+            ldi->next_datablock = allocate_new_datablock();
+            if (ldi->next_datablock == NULL)
+                return ZIP_INTERNALERROR;
+            ldi = ldi->next_datablock ;
+            ll->last_block = ldi;
+        }
+
+        if (ldi->avail_in_this_block < len)
+            copy_this = (uInt)ldi->avail_in_this_block;
+        else
+            copy_this = (uInt)len;
+
+        to_copy = &(ldi->data[ldi->filled_in_this_block]);
+
+        for (i=0;i<copy_this;i++)
+            *(to_copy+i)=*(from_copy+i);
+
+        ldi->filled_in_this_block += copy_this;
+        ldi->avail_in_this_block -= copy_this;
+        from_copy += copy_this ;
+        len -= copy_this;
+    }
+    return ZIP_OK;
+}
+
+
+local int write_datablock(fout,ll)
+    FILE * fout;
+    linkedlist_data* ll;    
+{
+    linkedlist_datablock_internal* ldi;
+    ldi = ll->first_block;
+    while (ldi!=NULL)
+    {
+        if (ldi->filled_in_this_block > 0)
+            if (fwrite(ldi->data,(uInt)ldi->filled_in_this_block,1,fout)!=1)
+                return ZIP_ERRNO;
+        ldi = ldi->next_datablock;
+    }
+    return ZIP_OK;
+}
+
+/****************************************************************************/
+
+/* ===========================================================================
+   Outputs a long in LSB order to the given file
+   nbByte == 1, 2 or 4 (byte, short or long)
+*/
+
+local int ziplocal_putValue OF((FILE *file, uLong x, int nbByte));
+local int ziplocal_putValue (file, x, nbByte)
+    FILE *file;
+    uLong x;
+    int nbByte;
+{
+    unsigned char buf[4];
+    int n;
+    for (n = 0; n < nbByte; n++) {
+        buf[n] = (unsigned char)(x & 0xff);
+        x >>= 8;
+    }
+    if (fwrite(buf,nbByte,1,file)!=1)
+        return ZIP_ERRNO;
+    else
+        return ZIP_OK;
+}
+
+local void ziplocal_putValue_inmemory OF((void* dest, uLong x, int nbByte));
+local void ziplocal_putValue_inmemory (dest, x, nbByte)
+    void* dest;
+    uLong x;
+    int nbByte;
+{
+    unsigned char* buf=(unsigned char*)dest;
+    int n;
+    for (n = 0; n < nbByte; n++) {
+        buf[n] = (unsigned char)(x & 0xff);
+        x >>= 8;
+    }
+}
+/****************************************************************************/
+
+
+local uLong ziplocal_TmzDateToDosDate(ptm,dosDate)
+    tm_zip* ptm;
+    uLong dosDate;
+{
+    uLong year = (uLong)ptm->tm_year;
+    if (year>1980)
+        year-=1980;
+    else if (year>80)
+        year-=80;
+    return
+      (uLong) (((ptm->tm_mday) + (32 * (ptm->tm_mon+1)) + (512 * year)) << 16) |
+        ((ptm->tm_sec/2) + (32* ptm->tm_min) + (2048 * (uLong)ptm->tm_hour));
+}
+
+
+/****************************************************************************/
+
+extern zipFile ZEXPORT zipOpen (pathname, append)
+    const char *pathname;
+    int append;
+{
+    zip_internal ziinit;
+    zip_internal* zi;
+
+    ziinit.filezip = fopen(pathname,(append == 0) ? "wb" : "ab");
+    if (ziinit.filezip == NULL)
+        return NULL;
+    ziinit.begin_pos = ftell(ziinit.filezip);
+    ziinit.in_opened_file_inzip = 0;
+    ziinit.ci.stream_initialised = 0;
+    ziinit.number_entry = 0;
+    init_linkedlist(&(ziinit.central_dir));
+
+
+    zi = (zip_internal*)ALLOC(sizeof(zip_internal));
+    if (zi==NULL)
+    {
+        fclose(ziinit.filezip);
+        return NULL;
+    }
+
+    *zi = ziinit;
+    return (zipFile)zi;
+}
+
+extern int ZEXPORT zipOpenNewFileInZip (file, filename, zipfi, 
+                                        extrafield_local, size_extrafield_local,
+                                        extrafield_global, size_extrafield_global,
+                                        comment, method, level)
+    zipFile file;
+    const char* filename;
+    const zip_fileinfo* zipfi;
+    const void* extrafield_local;
+    uInt size_extrafield_local;
+    const void* extrafield_global;
+    uInt size_extrafield_global;
+    const char* comment;
+    int method;
+    int level;
+{
+    zip_internal* zi;
+    uInt size_filename;
+    uInt size_comment;
+    uInt i;
+    int err = ZIP_OK;
+
+    if (file == NULL)
+        return ZIP_PARAMERROR;
+    if ((method!=0) && (method!=Z_DEFLATED))
+        return ZIP_PARAMERROR;
+
+    zi = (zip_internal*)file;
+
+    if (zi->in_opened_file_inzip == 1)
+    {
+        err = zipCloseFileInZip (file);
+        if (err != ZIP_OK)
+            return err;
+    }
+
+
+    if (filename==NULL)
+        filename="-";
+
+    if (comment==NULL)
+        size_comment = 0;
+    else
+        size_comment = strlen(comment);
+
+    size_filename = strlen(filename);
+
+    if (zipfi == NULL)
+        zi->ci.dosDate = 0;
+    else
+    {
+        if (zipfi->dosDate != 0)
+            zi->ci.dosDate = zipfi->dosDate;
+        else zi->ci.dosDate = ziplocal_TmzDateToDosDate(&zipfi->tmz_date,zipfi->dosDate);
+    }
+
+    zi->ci.flag = 0;
+    if ((level==8) || (level==9))
+      zi->ci.flag |= 2;
+    if ((level==2))
+      zi->ci.flag |= 4;
+    if ((level==1))
+      zi->ci.flag |= 6;
+
+    zi->ci.crc32 = 0;
+    zi->ci.method = method;
+    zi->ci.stream_initialised = 0;
+    zi->ci.pos_in_buffered_data = 0;
+    zi->ci.pos_local_header = ftell(zi->filezip);
+    zi->ci.size_centralheader = SIZECENTRALHEADER + size_filename + 
+                                      size_extrafield_global + size_comment;
+    zi->ci.central_header = (char*)ALLOC((uInt)zi->ci.size_centralheader);
+
+    ziplocal_putValue_inmemory(zi->ci.central_header,(uLong)CENTRALHEADERMAGIC,4);
+    /* version info */
+    ziplocal_putValue_inmemory(zi->ci.central_header+4,(uLong)VERSIONMADEBY,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+6,(uLong)20,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+8,(uLong)zi->ci.flag,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+10,(uLong)zi->ci.method,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+12,(uLong)zi->ci.dosDate,4);
+    ziplocal_putValue_inmemory(zi->ci.central_header+16,(uLong)0,4); /*crc*/
+    ziplocal_putValue_inmemory(zi->ci.central_header+20,(uLong)0,4); /*compr size*/
+    ziplocal_putValue_inmemory(zi->ci.central_header+24,(uLong)0,4); /*uncompr size*/
+    ziplocal_putValue_inmemory(zi->ci.central_header+28,(uLong)size_filename,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+30,(uLong)size_extrafield_global,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+32,(uLong)size_comment,2);
+    ziplocal_putValue_inmemory(zi->ci.central_header+34,(uLong)0,2); /*disk nm start*/
+
+    if (zipfi==NULL)
+        ziplocal_putValue_inmemory(zi->ci.central_header+36,(uLong)0,2); 
+    else
+        ziplocal_putValue_inmemory(zi->ci.central_header+36,(uLong)zipfi->internal_fa,2); 
+
+    if (zipfi==NULL)
+        ziplocal_putValue_inmemory(zi->ci.central_header+38,(uLong)0,4); 
+    else
+        ziplocal_putValue_inmemory(zi->ci.central_header+38,(uLong)zipfi->external_fa,4);
+
+    ziplocal_putValue_inmemory(zi->ci.central_header+42,(uLong)zi->ci.pos_local_header,4);
+
+    for (i=0;i<size_filename;i++)
+        *(zi->ci.central_header+SIZECENTRALHEADER+i) = *(filename+i);
+
+    for (i=0;i<size_extrafield_global;i++)
+        *(zi->ci.central_header+SIZECENTRALHEADER+size_filename+i) =
+              *(((const char*)extrafield_global)+i);
+
+    for (i=0;i<size_comment;i++)
+        *(zi->ci.central_header+SIZECENTRALHEADER+size_filename+
+              size_extrafield_global+i) = *(filename+i);
+    if (zi->ci.central_header == NULL)
+        return ZIP_INTERNALERROR;
+
+    /* write the local header */
+    err = ziplocal_putValue(zi->filezip,(uLong)LOCALHEADERMAGIC,4);
+
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)20,2);/* version needed to extract */
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.flag,2);
+
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.method,2);
+
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.dosDate,4);
+
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)0,4); /* crc 32, unknown */
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)0,4); /* compressed size, unknown */
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)0,4); /* uncompressed size, unknown */
+
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)size_filename,2);
+
+    if (err==ZIP_OK)
+        err = ziplocal_putValue(zi->filezip,(uLong)size_extrafield_local,2);
+
+    if ((err==ZIP_OK) && (size_filename>0))
+        if (fwrite(filename,(uInt)size_filename,1,zi->filezip)!=1)
+                err = ZIP_ERRNO;
+
+    if ((err==ZIP_OK) && (size_extrafield_local>0))
+        if (fwrite(extrafield_local,(uInt)size_extrafield_local,1,zi->filezip)
+                                                                           !=1)
+                err = ZIP_ERRNO;
+
+    zi->ci.stream.avail_in = (uInt)0;
+    zi->ci.stream.avail_out = (uInt)Z_BUFSIZE;
+    zi->ci.stream.next_out = zi->ci.buffered_data;
+    zi->ci.stream.total_in = 0;
+    zi->ci.stream.total_out = 0;
+
+    if ((err==ZIP_OK) && (zi->ci.method == Z_DEFLATED))
+    {
+        zi->ci.stream.zalloc = (alloc_func)0;
+        zi->ci.stream.zfree = (free_func)0;
+        zi->ci.stream.opaque = (voidpf)0;
+
+        err = deflateInit2(&zi->ci.stream, level,
+               Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, 0);
+
+        if (err==Z_OK)
+            zi->ci.stream_initialised = 1;
+    }
+
+
+    if (err==Z_OK)
+        zi->in_opened_file_inzip = 1;
+    return err;
+}
+
+extern int ZEXPORT zipWriteInFileInZip (file, buf, len)
+    zipFile file;
+    const voidp buf;
+    unsigned len;
+{
+    zip_internal* zi;
+    int err=ZIP_OK;
+
+    if (file == NULL)
+        return ZIP_PARAMERROR;
+    zi = (zip_internal*)file;
+
+    if (zi->in_opened_file_inzip == 0)
+        return ZIP_PARAMERROR;
+
+    zi->ci.stream.next_in = buf;
+    zi->ci.stream.avail_in = len;
+    zi->ci.crc32 = crc32(zi->ci.crc32,buf,len);
+
+    while ((err==ZIP_OK) && (zi->ci.stream.avail_in>0))
+    {
+        if (zi->ci.stream.avail_out == 0)
+        {
+            if (fwrite(zi->ci.buffered_data,(uInt)zi->ci.pos_in_buffered_data,1,zi->filezip)
+                                                                           !=1)
+                err = ZIP_ERRNO;
+            zi->ci.pos_in_buffered_data = 0;
+            zi->ci.stream.avail_out = (uInt)Z_BUFSIZE;
+            zi->ci.stream.next_out = zi->ci.buffered_data;
+        }
+
+        if (zi->ci.method == Z_DEFLATED)
+        {
+            uLong uTotalOutBefore = zi->ci.stream.total_out;
+            err=deflate(&zi->ci.stream,  Z_NO_FLUSH);
+            zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ;
+
+        }
+        else
+        {
+            uInt copy_this,i;
+            if (zi->ci.stream.avail_in < zi->ci.stream.avail_out)
+                copy_this = zi->ci.stream.avail_in;
+            else
+                copy_this = zi->ci.stream.avail_out;
+            for (i=0;i<copy_this;i++)
+                *(((char*)zi->ci.stream.next_out)+i) =
+                    *(((const char*)zi->ci.stream.next_in)+i);
+            {
+                zi->ci.stream.avail_in -= copy_this;
+                zi->ci.stream.avail_out-= copy_this;
+                zi->ci.stream.next_in+= copy_this;
+                zi->ci.stream.next_out+= copy_this;
+                zi->ci.stream.total_in+= copy_this;
+                zi->ci.stream.total_out+= copy_this;
+                zi->ci.pos_in_buffered_data += copy_this;
+            }
+        }
+    }
+
+    return 0;
+}
+
+extern int ZEXPORT zipCloseFileInZip (file)
+    zipFile file;
+{
+    zip_internal* zi;
+    int err=ZIP_OK;
+
+    if (file == NULL)
+        return ZIP_PARAMERROR;
+    zi = (zip_internal*)file;
+
+    if (zi->in_opened_file_inzip == 0)    
+        return ZIP_PARAMERROR;
+    zi->ci.stream.avail_in = 0;
+    
+    if (zi->ci.method == Z_DEFLATED)
+        while (err==ZIP_OK)
+    {
+        uLong uTotalOutBefore;
+        if (zi->ci.stream.avail_out == 0)
+        {
+            if (fwrite(zi->ci.buffered_data,(uInt)zi->ci.pos_in_buffered_data,1,zi->filezip)
+                                                                           !=1)
+                err = ZIP_ERRNO;
+            zi->ci.pos_in_buffered_data = 0;
+            zi->ci.stream.avail_out = (uInt)Z_BUFSIZE;
+            zi->ci.stream.next_out = zi->ci.buffered_data;
+        }
+        uTotalOutBefore = zi->ci.stream.total_out;
+        err=deflate(&zi->ci.stream,  Z_FINISH);
+        zi->ci.pos_in_buffered_data += (uInt)(zi->ci.stream.total_out - uTotalOutBefore) ;
+    }
+
+    if (err==Z_STREAM_END)
+        err=ZIP_OK; /* this is normal */
+
+    if ((zi->ci.pos_in_buffered_data>0) && (err==ZIP_OK))
+        if (fwrite(zi->ci.buffered_data,(uInt)zi->ci.pos_in_buffered_data,1,zi->filezip)
+                                                                       !=1)
+            err = ZIP_ERRNO;
+
+    if ((zi->ci.method == Z_DEFLATED) && (err==ZIP_OK))
+    {
+        err=deflateEnd(&zi->ci.stream);
+        zi->ci.stream_initialised = 0;
+    }
+
+    ziplocal_putValue_inmemory(zi->ci.central_header+16,(uLong)zi->ci.crc32,4); /*crc*/
+    ziplocal_putValue_inmemory(zi->ci.central_header+20,
+                                (uLong)zi->ci.stream.total_out,4); /*compr size*/
+    ziplocal_putValue_inmemory(zi->ci.central_header+24,
+                                (uLong)zi->ci.stream.total_in,4); /*uncompr size*/
+
+    if (err==ZIP_OK)
+        err = add_data_in_datablock(&zi->central_dir,zi->ci.central_header,
+                                       (uLong)zi->ci.size_centralheader);
+    free(zi->ci.central_header);
+
+    if (err==ZIP_OK)
+    {
+        long cur_pos_inzip = ftell(zi->filezip);
+	    if (fseek(zi->filezip,
+                  zi->ci.pos_local_header + 14,SEEK_SET)!=0)
+		    err = ZIP_ERRNO;
+
+        if (err==ZIP_OK)
+            err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.crc32,4); /* crc 32, unknown */
+
+        if (err==ZIP_OK) /* compressed size, unknown */
+            err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.stream.total_out,4); 
+
+        if (err==ZIP_OK) /* uncompressed size, unknown */
+            err = ziplocal_putValue(zi->filezip,(uLong)zi->ci.stream.total_in,4);
+
+	    if (fseek(zi->filezip,
+                  cur_pos_inzip,SEEK_SET)!=0)
+		    err = ZIP_ERRNO;
+    }
+
+    zi->number_entry ++;
+    zi->in_opened_file_inzip = 0;
+
+    return err;
+}
+
+extern int ZEXPORT zipClose (file, global_comment)
+    zipFile file;
+    const char* global_comment;
+{
+    zip_internal* zi;
+    int err = 0;
+    uLong size_centraldir = 0;
+    uLong centraldir_pos_inzip ;
+    uInt size_global_comment;
+    if (file == NULL)
+        return ZIP_PARAMERROR;
+    zi = (zip_internal*)file;
+
+    if (zi->in_opened_file_inzip == 1)
+    {
+        err = zipCloseFileInZip (file);
+    }
+
+    if (global_comment==NULL)
+        size_global_comment = 0;
+    else
+        size_global_comment = strlen(global_comment);
+
+
+    centraldir_pos_inzip = ftell(zi->filezip);
+    if (err==ZIP_OK)
+    {
+        linkedlist_datablock_internal* ldi = zi->central_dir.first_block ;
+        while (ldi!=NULL)
+        {
+            if ((err==ZIP_OK) && (ldi->filled_in_this_block>0))
+                if (fwrite(ldi->data,(uInt)ldi->filled_in_this_block,
+                                        1,zi->filezip) !=1 )
+                    err = ZIP_ERRNO;
+
+            size_centraldir += ldi->filled_in_this_block;
+            ldi = ldi->next_datablock;
+        }
+    }
+    free_datablock(zi->central_dir.first_block);
+
+    if (err==ZIP_OK) /* Magic End */
+        err = ziplocal_putValue(zi->filezip,(uLong)ENDHEADERMAGIC,4);
+
+    if (err==ZIP_OK) /* number of this disk */
+        err = ziplocal_putValue(zi->filezip,(uLong)0,2);
+
+    if (err==ZIP_OK) /* number of the disk with the start of the central directory */
+        err = ziplocal_putValue(zi->filezip,(uLong)0,2);
+
+    if (err==ZIP_OK) /* total number of entries in the central dir on this disk */
+        err = ziplocal_putValue(zi->filezip,(uLong)zi->number_entry,2);
+
+    if (err==ZIP_OK) /* total number of entries in the central dir */
+        err = ziplocal_putValue(zi->filezip,(uLong)zi->number_entry,2);
+
+    if (err==ZIP_OK) /* size of the central directory */
+        err = ziplocal_putValue(zi->filezip,(uLong)size_centraldir,4);
+
+    if (err==ZIP_OK) /* offset of start of central directory with respect to the 
+	                        starting disk number */
+        err = ziplocal_putValue(zi->filezip,(uLong)centraldir_pos_inzip ,4);
+
+    if (err==ZIP_OK) /* zipfile comment length */
+        err = ziplocal_putValue(zi->filezip,(uLong)size_global_comment,2);
+
+    if ((err==ZIP_OK) && (size_global_comment>0))
+        if (fwrite(global_comment,(uInt)size_global_comment,1,zi->filezip) !=1 )
+                err = ZIP_ERRNO;
+    fclose(zi->filezip);
+    TRYFREE(zi);
+
+    return err;
+}

contrib/minizip/zip.def

@@ -0,0 +1,5 @@
+	zipOpen                       @80
+	zipOpenNewFileInZip           @81
+	zipWriteInFileInZip           @82
+	zipCloseFileInZip             @83
+	zipClose                      @84

contrib/minizip/zip.h

@@ -0,0 +1,150 @@
+/* zip.h -- IO for compress .zip files using zlib 
+   Version 0.15 alpha, Mar 19th, 1998,
+
+   Copyright (C) 1998 Gilles Vollant
+
+   This unzip package allow creates .ZIP file, compatible with PKZip 2.04g
+     WinZip, InfoZip tools and compatible.
+   Encryption and multi volume ZipFile (span) are not supported.
+   Old compressions used by old PKZip 1.x are not supported
+
+  For uncompress .zip file, look at unzip.h
+
+   THIS IS AN ALPHA VERSION. AT THIS STAGE OF DEVELOPPEMENT, SOMES API OR STRUCTURE
+   CAN CHANGE IN FUTURE VERSION !!
+   I WAIT FEEDBACK at mail info@winimage.com
+   Visit also http://www.winimage.com/zLibDll/zip.htm for evolution
+
+   Condition of use and distribution are the same than zlib :
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+
+*/
+
+/* for more info about .ZIP format, see 
+      ftp://ftp.cdrom.com/pub/infozip/doc/appnote-970311-iz.zip
+   PkWare has also a specification at :
+      ftp://ftp.pkware.com/probdesc.zip
+*/
+
+#ifndef _zip_H
+#define _zip_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef _ZLIB_H
+#include "zlib.h"
+#endif
+
+#if defined(STRICTZIP) || defined(STRICTZIPUNZIP)
+/* like the STRICT of WIN32, we define a pointer that cannot be converted
+    from (void*) without cast */
+typedef struct TagzipFile__ { int unused; } zipFile__; 
+typedef zipFile__ *zipFile;
+#else
+typedef voidp zipFile;
+#endif
+
+#define ZIP_OK                                  (0)
+#define ZIP_ERRNO               (Z_ERRNO)
+#define ZIP_PARAMERROR                  (-102)
+#define ZIP_INTERNALERROR               (-104)
+
+/* tm_zip contain date/time info */
+typedef struct tm_zip_s 
+{
+	uInt tm_sec;            /* seconds after the minute - [0,59] */
+	uInt tm_min;            /* minutes after the hour - [0,59] */
+	uInt tm_hour;           /* hours since midnight - [0,23] */
+	uInt tm_mday;           /* day of the month - [1,31] */
+	uInt tm_mon;            /* months since January - [0,11] */
+	uInt tm_year;           /* years - [1980..2044] */
+} tm_zip;
+
+typedef struct
+{
+	tm_zip      tmz_date;       /* date in understandable format           */
+    uLong       dosDate;       /* if dos_date == 0, tmu_date is used      */
+/*    uLong       flag;        */   /* general purpose bit flag        2 bytes */
+
+    uLong       internal_fa;    /* internal file attributes        2 bytes */
+    uLong       external_fa;    /* external file attributes        4 bytes */
+} zip_fileinfo;
+
+extern zipFile ZEXPORT zipOpen OF((const char *pathname, int append));
+/*
+  Create a zipfile.
+	 pathname contain on Windows NT a filename like "c:\\zlib\\zlib111.zip" or on
+	   an Unix computer "zlib/zlib111.zip".
+	 if the file pathname exist and append=1, the zip will be created at the end
+	   of the file. (useful if the file contain a self extractor code)
+	 If the zipfile cannot be opened, the return value is NULL.
+     Else, the return value is a zipFile Handle, usable with other function
+	   of this zip package.
+
+
+*/
+
+extern int ZEXPORT zipOpenNewFileInZip OF((zipFile file,
+					   const char* filename,
+					   const zip_fileinfo* zipfi,
+					   const void* extrafield_local,
+					   uInt size_extrafield_local,
+					   const void* extrafield_global,
+					   uInt size_extrafield_global,
+					   const char* comment,
+					   int method,
+					   int level));
+/*
+  Open a file in the ZIP for writing.
+  filename : the filename in zip (if NULL, '-' without quote will be used
+  *zipfi contain supplemental information
+  if extrafield_local!=NULL and size_extrafield_local>0, extrafield_local
+    contains the extrafield data the the local header
+  if extrafield_global!=NULL and size_extrafield_global>0, extrafield_global
+    contains the extrafield data the the local header
+  if comment != NULL, comment contain the comment string
+  method contain the compression method (0 for store, Z_DEFLATED for deflate)
+  level contain the level of compression (can be Z_DEFAULT_COMPRESSION)
+*/
+
+extern int ZEXPORT zipWriteInFileInZip OF((zipFile file,
+					   const voidp buf,
+					   unsigned len));
+/*
+  Write data in the zipfile
+*/
+
+extern int ZEXPORT zipCloseFileInZip OF((zipFile file));
+/*
+  Close the current file in the zipfile
+*/
+
+extern int ZEXPORT zipClose OF((zipFile file,
+				const char* global_comment));
+/*
+  Close the zipfile
+*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _zip_H */

contrib/minizip/zlibvc.def

@@ -0,0 +1,74 @@
+LIBRARY		"zlib"
+
+DESCRIPTION	'"""zlib data compression library"""'
+
+
+VERSION		1.11
+
+
+HEAPSIZE	1048576,8192
+
+EXPORTS
+    adler32                        @1
+    compress                       @2
+    crc32                          @3
+    deflate                        @4
+    deflateCopy                    @5
+    deflateEnd                     @6
+    deflateInit2_                  @7
+    deflateInit_                   @8
+    deflateParams                  @9
+    deflateReset                   @10
+    deflateSetDictionary           @11
+    gzclose                        @12
+    gzdopen                        @13
+    gzerror                        @14
+    gzflush                        @15
+    gzopen                         @16
+    gzread                         @17
+    gzwrite                        @18
+    inflate                        @19
+    inflateEnd                     @20
+    inflateInit2_                  @21
+    inflateInit_                   @22
+    inflateReset                   @23
+    inflateSetDictionary           @24
+    inflateSync                    @25
+    uncompress                     @26
+    zlibVersion                    @27
+    gzprintf                       @28
+    gzputc                         @29
+    gzgetc                         @30
+    gzseek                         @31
+    gzrewind                       @32
+    gztell                         @33
+    gzeof                          @34
+    gzsetparams                    @35
+    zError                         @36
+    inflateSyncPoint               @37
+    get_crc_table                  @38
+    compress2                      @39
+    gzputs                         @40
+    gzgets                         @41
+
+	unzOpen                       @61
+	unzClose                      @62
+	unzGetGlobalInfo              @63
+	unzGetCurrentFileInfo         @64
+	unzGoToFirstFile              @65
+	unzGoToNextFile               @66
+	unzOpenCurrentFile            @67
+	unzReadCurrentFile            @68
+	unztell                       @70
+	unzeof                        @71
+	unzCloseCurrentFile           @72
+	unzGetGlobalComment           @73
+	unzStringFileNameCompare      @74
+	unzLocateFile                 @75
+	unzGetLocalExtrafield         @76
+
+	zipOpen                       @80
+	zipOpenNewFileInZip           @81
+	zipWriteInFileInZip           @82
+	zipCloseFileInZip             @83
+	zipClose                      @84

contrib/minizip/zlibvc.dsp

@@ -0,0 +1,651 @@
+# Microsoft Developer Studio Project File - Name="zlibvc" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 5.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102
+# TARGTYPE "Win32 (ALPHA) Dynamic-Link Library" 0x0602
+
+CFG=zlibvc - Win32 Release
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE 
+!MESSAGE NMAKE /f "zlibvc.mak".
+!MESSAGE 
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE 
+!MESSAGE NMAKE /f "zlibvc.mak" CFG="zlibvc - Win32 Release"
+!MESSAGE 
+!MESSAGE Possible choices for configuration are:
+!MESSAGE 
+!MESSAGE "zlibvc - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlibvc - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlibvc - Win32 ReleaseAxp" (based on\
+ "Win32 (ALPHA) Dynamic-Link Library")
+!MESSAGE "zlibvc - Win32 ReleaseWithoutAsm" (based on\
+ "Win32 (x86) Dynamic-Link Library")
+!MESSAGE "zlibvc - Win32 ReleaseWithoutCrtdll" (based on\
+ "Win32 (x86) Dynamic-Link Library")
+!MESSAGE 
+
+# Begin Project
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir ".\Release"
+# PROP BASE Intermediate_Dir ".\Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir ".\Release"
+# PROP Intermediate_Dir ".\Release"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /FD /c
+# SUBTRACT CPP /YX
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "NDEBUG"
+# ADD RSC /l 0x40c /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /machine:I386
+# ADD LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
+# SUBTRACT LINK32 /pdb:none
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir ".\Debug"
+# PROP BASE Intermediate_Dir ".\Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir ".\Debug"
+# PROP Intermediate_Dir ".\Debug"
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /YX /c
+# ADD CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /FD /c
+# SUBTRACT CPP /YX
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "_DEBUG" /win32
+# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "_DEBUG"
+# ADD RSC /l 0x40c /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:windows /dll /debug /machine:I386
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /debug /machine:I386 /out:".\Debug\zlib.dll"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlibvc__"
+# PROP BASE Intermediate_Dir "zlibvc__"
+# PROP BASE Ignore_Export_Lib 0
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "zlibvc__"
+# PROP Intermediate_Dir "zlibvc__"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+CPP=cl.exe
+# ADD BASE CPP /nologo /MT /Gt0 /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /YX /FD /c
+# ADD CPP /nologo /MT /Gt0 /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /FD /c
+# SUBTRACT CPP /YX
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "NDEBUG"
+# ADD RSC /l 0x40c /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 crtdll.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /map /machine:ALPHA /nodefaultlib /out:".\Release\zlib.dll"
+# SUBTRACT BASE LINK32 /pdb:none
+# ADD LINK32 crtdll.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib /nologo /subsystem:windows /dll /map /machine:ALPHA /nodefaultlib /out:"zlibvc__\zlib.dll"
+# SUBTRACT LINK32 /pdb:none
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlibvc_0"
+# PROP BASE Intermediate_Dir "zlibvc_0"
+# PROP BASE Ignore_Export_Lib 0
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "zlibvc_0"
+# PROP Intermediate_Dir "zlibvc_0"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /YX /FD /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /FAcs /FR /FD /c
+# SUBTRACT CPP /YX
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "NDEBUG"
+# ADD RSC /l 0x40c /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
+# SUBTRACT BASE LINK32 /pdb:none
+# ADD LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\zlibvc_0\zlib.dll"
+# SUBTRACT LINK32 /pdb:none
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "zlibvc_1"
+# PROP BASE Intermediate_Dir "zlibvc_1"
+# PROP BASE Ignore_Export_Lib 0
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "zlibvc_1"
+# PROP Intermediate_Dir "zlibvc_1"
+# PROP Ignore_Export_Lib 0
+# PROP Target_Dir ""
+CPP=cl.exe
+# ADD BASE CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /YX /FD /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /D "_WINDLL" /D "_WIN32" /D "BUILD_ZLIBDLL" /D "ZLIB_DLL" /D "DYNAMIC_CRC_TABLE" /D "ASMV" /FAcs /FR /FD /c
+# SUBTRACT CPP /YX
+MTL=midl.exe
+# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32
+RSC=rc.exe
+# ADD BASE RSC /l 0x40c /d "NDEBUG"
+# ADD RSC /l 0x40c /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LINK32=link.exe
+# ADD BASE LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\Release\zlib.dll"
+# SUBTRACT BASE LINK32 /pdb:none
+# ADD LINK32 gvmat32.obj kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib crtdll.lib /nologo /subsystem:windows /dll /map /machine:I386 /nodefaultlib /out:".\zlibvc_1\zlib.dll"
+# SUBTRACT LINK32 /pdb:none
+
+!ENDIF 
+
+# Begin Target
+
+# Name "zlibvc - Win32 Release"
+# Name "zlibvc - Win32 Debug"
+# Name "zlibvc - Win32 ReleaseAxp"
+# Name "zlibvc - Win32 ReleaseWithoutAsm"
+# Name "zlibvc - Win32 ReleaseWithoutCrtdll"
+# Begin Group "Source Files"
+
+# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;hpj;bat;for;f90"
+# Begin Source File
+
+SOURCE=.\adler32.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_ADLER=\
+	".\zconf.h"\
+	".\zlib.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\compress.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_COMPR=\
+	".\zconf.h"\
+	".\zlib.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\crc32.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_CRC32=\
+	".\zconf.h"\
+	".\zlib.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\deflate.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_DEFLA=\
+	".\deflate.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\gvmat32c.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\gzio.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_GZIO_=\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\infblock.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFBL=\
+	".\infblock.h"\
+	".\infcodes.h"\
+	".\inftrees.h"\
+	".\infutil.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\infcodes.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFCO=\
+	".\infblock.h"\
+	".\infcodes.h"\
+	".\inffast.h"\
+	".\inftrees.h"\
+	".\infutil.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\inffast.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFFA=\
+	".\infblock.h"\
+	".\infcodes.h"\
+	".\inffast.h"\
+	".\inftrees.h"\
+	".\infutil.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\inflate.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFLA=\
+	".\infblock.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\inftrees.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFTR=\
+	".\inftrees.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\infutil.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_INFUT=\
+	".\infblock.h"\
+	".\infcodes.h"\
+	".\inftrees.h"\
+	".\infutil.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\trees.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_TREES=\
+	".\deflate.h"\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\uncompr.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_UNCOM=\
+	".\zconf.h"\
+	".\zlib.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\unzip.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\zip.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# Begin Source File
+
+SOURCE=.\zlib.rc
+# End Source File
+# Begin Source File
+
+SOURCE=.\zlibvc.def
+# End Source File
+# Begin Source File
+
+SOURCE=.\zutil.c
+
+!IF  "$(CFG)" == "zlibvc - Win32 Release"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 Debug"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseAxp"
+
+DEP_CPP_ZUTIL=\
+	".\zconf.h"\
+	".\zlib.h"\
+	".\zutil.h"\
+	
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutAsm"
+
+!ELSEIF  "$(CFG)" == "zlibvc - Win32 ReleaseWithoutCrtdll"
+
+!ENDIF 
+
+# End Source File
+# End Group
+# Begin Group "Header Files"
+
+# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd"
+# Begin Source File
+
+SOURCE=.\deflate.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\infblock.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\infcodes.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\inffast.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\inftrees.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\infutil.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\zconf.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\zlib.h
+# End Source File
+# Begin Source File
+
+SOURCE=.\zutil.h
+# End Source File
+# End Group
+# Begin Group "Resource Files"
+
+# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe"
+# End Group
+# End Target
+# End Project

contrib/minizip/zlibvc.dsw

@@ -0,0 +1,41 @@
+Microsoft Developer Studio Workspace File, Format Version 5.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "zlibstat"=.\zlibstat.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Project: "zlibvc"=.\zlibvc.dsp - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

contrib/untgz/Makefile

@@ -0,0 +1,14 @@
+CC=cc
+CFLAGS=-g
+
+untgz: untgz.o  ../../libz.a
+	$(CC) $(CFLAGS) -o untgz  untgz.o -L../.. -lz
+
+untgz.o: untgz.c ../../zlib.h
+	$(CC) $(CFLAGS) -c -I../.. untgz.c
+
+../../libz.a:
+	cd ../..; make
+
+clean:
+	rm -f untgz untgz.o *~

contrib/untgz/makefile.w32

@@ -0,0 +1,63 @@
+# Makefile for zlib.  Modified for mingw32
+# For conditions of distribution and use, see copyright notice in zlib.h 
+
+# To compile, 
+# 
+#   make -fmakefile.w32
+# 
+
+CC=gcc
+
+# Generate dependencies (see end of the file)
+
+CPPFLAGS=-MMD 
+
+#CFLAGS=-MMD -O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-MMD -g -DDEBUG
+CFLAGS=-O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+             -Wstrict-prototypes -Wmissing-prototypes
+
+# If cp.exe is not found, replace with copy /Y .
+CP=cp -f
+
+# The default value of RM is "rm -f."  
+# If "rm.exe" is not found, uncomment:
+# RM=del
+
+LD=gcc
+LDLIBS=-L. -lz
+LDFLAGS=-s
+
+
+INCL=zlib.h zconf.h
+LIBS=libz.a
+
+AR=ar rcs
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o \
+       inffast.o
+
+TEST_OBJS = minigzip.o untgz.o
+
+all: minigzip.exe untgz.exe
+
+rebuild:	clean	all
+
+libz.a: $(OBJS)
+	$(AR) $@ $(OBJS)
+
+%.exe : %.o $(LIBS)
+	$(LD) $(LDFLAGS) -o $@ $< $(LDLIBS)
+
+.PHONY : clean
+
+clean:
+	$(RM) *.d *.o *.exe libz.a foo.gz
+
+DEPS := $(wildcard *.d)
+ifneq ($(DEPS),)
+include $(DEPS)
+endif
+

contrib/untgz/untgz.c

@@ -0,0 +1,522 @@
+/*
+ * untgz.c -- Display contents and/or extract file from
+ * a gzip'd TAR file
+ * written by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
+ * adaptation to Unix by Jean-loup Gailly <jloup@gzip.org>
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <errno.h>
+#include <fcntl.h>
+#ifdef unix
+# include <unistd.h>
+#else
+# include <direct.h>
+# include <io.h>
+#endif
+
+#include "zlib.h"
+
+#ifdef WIN32
+#  ifndef F_OK
+#    define F_OK (0)
+#  endif
+#  ifdef _MSC_VER
+#    define mkdir(dirname,mode) _mkdir(dirname)
+#    define strdup(str)         _strdup(str)
+#    define unlink(fn)          _unlink(fn)
+#    define access(path,mode)   _access(path,mode)
+#  else
+#    define mkdir(dirname,mode) _mkdir(dirname)
+#  endif
+#else
+#  include <utime.h>
+#endif
+
+
+/* Values used in typeflag field.  */
+
+#define REGTYPE	 '0'		/* regular file */
+#define AREGTYPE '\0'		/* regular file */
+#define LNKTYPE  '1'		/* link */
+#define SYMTYPE  '2'		/* reserved */
+#define CHRTYPE  '3'		/* character special */
+#define BLKTYPE  '4'		/* block special */
+#define DIRTYPE  '5'		/* directory */
+#define FIFOTYPE '6'		/* FIFO special */
+#define CONTTYPE '7'		/* reserved */
+
+#define BLOCKSIZE 512
+
+struct tar_header
+{				/* byte offset */
+  char name[100];		/*   0 */
+  char mode[8];			/* 100 */
+  char uid[8];			/* 108 */
+  char gid[8];			/* 116 */
+  char size[12];		/* 124 */
+  char mtime[12];		/* 136 */
+  char chksum[8];		/* 148 */
+  char typeflag;		/* 156 */
+  char linkname[100];		/* 157 */
+  char magic[6];		/* 257 */
+  char version[2];		/* 263 */
+  char uname[32];		/* 265 */
+  char gname[32];		/* 297 */
+  char devmajor[8];		/* 329 */
+  char devminor[8];		/* 337 */
+  char prefix[155];		/* 345 */
+				/* 500 */
+};
+
+union tar_buffer {
+  char               buffer[BLOCKSIZE];
+  struct tar_header  header;
+};
+
+enum { TGZ_EXTRACT = 0, TGZ_LIST };
+
+static char *TGZfname	OF((const char *));
+void TGZnotfound	OF((const char *));
+
+int getoct		OF((char *, int));
+char *strtime		OF((time_t *));
+int ExprMatch		OF((char *,char *));
+
+int makedir		OF((char *));
+int matchname		OF((int,int,char **,char *));
+
+void error		OF((const char *));
+int  tar		OF((gzFile, int, int, int, char **));
+
+void help		OF((int));
+int main		OF((int, char **));
+
+char *prog;
+
+/* This will give a benign warning */
+
+static char *TGZprefix[] = { "\0", ".tgz", ".tar.gz", ".tar", NULL };
+
+/* Return the real name of the TGZ archive */
+/* or NULL if it does not exist. */
+
+static char *TGZfname OF((const char *fname))
+{
+  static char buffer[1024];
+  int origlen,i;
+  
+  strcpy(buffer,fname);
+  origlen = strlen(buffer);
+
+  for (i=0; TGZprefix[i]; i++)
+    {
+       strcpy(buffer+origlen,TGZprefix[i]);
+       if (access(buffer,F_OK) == 0)
+         return buffer;
+    }
+  return NULL;
+}
+
+/* error message for the filename */
+
+void TGZnotfound OF((const char *fname))
+{
+  int i;
+
+  fprintf(stderr,"%s : couldn't find ",prog);
+  for (i=0;TGZprefix[i];i++)
+    fprintf(stderr,(TGZprefix[i+1]) ? "%s%s, " : "or %s%s\n",
+            fname,
+            TGZprefix[i]);
+  exit(1);
+}
+
+
+/* help functions */
+
+int getoct(char *p,int width)
+{
+  int result = 0;
+  char c;
+  
+  while (width --)
+    {
+      c = *p++;
+      if (c == ' ')
+	continue;
+      if (c == 0)
+	break;
+      result = result * 8 + (c - '0');
+    }
+  return result;
+}
+
+char *strtime (time_t *t)
+{
+  struct tm   *local;
+  static char result[32];
+
+  local = localtime(t);
+  sprintf(result,"%2d/%02d/%4d %02d:%02d:%02d",
+	  local->tm_mday, local->tm_mon+1, local->tm_year+1900,
+	  local->tm_hour, local->tm_min,   local->tm_sec);
+  return result;
+}
+
+
+/* regular expression matching */
+
+#define ISSPECIAL(c) (((c) == '*') || ((c) == '/'))
+
+int ExprMatch(char *string,char *expr)
+{
+  while (1)
+    {
+      if (ISSPECIAL(*expr))
+	{
+	  if (*expr == '/')
+	    {
+	      if (*string != '\\' && *string != '/')
+		return 0;
+	      string ++; expr++;
+	    }
+	  else if (*expr == '*')
+	    {
+	      if (*expr ++ == 0)
+		return 1;
+	      while (*++string != *expr)
+		if (*string == 0)
+		  return 0;
+	    }
+	}
+      else
+	{
+	  if (*string != *expr)
+	    return 0;
+	  if (*expr++ == 0)
+	    return 1;
+	  string++;
+	}
+    }
+}
+
+/* recursive make directory */
+/* abort if you get an ENOENT errno somewhere in the middle */
+/* e.g. ignore error "mkdir on existing directory" */
+/* */
+/* return 1 if OK */
+/*        0 on error */
+
+int makedir (char *newdir)
+{
+  char *buffer = strdup(newdir);
+  char *p;
+  int  len = strlen(buffer);
+  
+  if (len <= 0) {
+    free(buffer);
+    return 0;
+  }
+  if (buffer[len-1] == '/') {
+    buffer[len-1] = '\0';
+  }
+  if (mkdir(buffer, 0775) == 0)
+    {
+      free(buffer);
+      return 1;
+    }
+
+  p = buffer+1;
+  while (1)
+    {
+      char hold;
+      
+      while(*p && *p != '\\' && *p != '/')
+	p++;
+      hold = *p;
+      *p = 0;
+      if ((mkdir(buffer, 0775) == -1) && (errno == ENOENT))
+	{
+	  fprintf(stderr,"%s: couldn't create directory %s\n",prog,buffer);
+	  free(buffer);
+	  return 0;
+	}
+      if (hold == 0)
+	break;
+      *p++ = hold;
+    }
+  free(buffer);
+  return 1;
+}
+
+int matchname (int arg,int argc,char **argv,char *fname)
+{
+  if (arg == argc)		/* no arguments given (untgz tgzarchive) */
+    return 1;
+
+  while (arg < argc)
+    if (ExprMatch(fname,argv[arg++]))
+      return 1;
+
+  return 0; /* ignore this for the moment being */
+}
+
+
+/* Tar file list or extract */
+
+int tar (gzFile in,int action,int arg,int argc,char **argv)
+{
+  union  tar_buffer buffer;
+  int    len;
+  int    err;
+  int    getheader = 1;
+  int    remaining = 0;
+  FILE   *outfile = NULL;
+  char   fname[BLOCKSIZE];
+  time_t tartime;
+  
+  if (action == TGZ_LIST)
+    printf("     day      time     size                       file\n"
+	   " ---------- -------- --------- -------------------------------------\n");
+  while (1)
+    {
+      len = gzread(in, &buffer, BLOCKSIZE);
+      if (len < 0)
+	error (gzerror(in, &err));
+      /*
+       * Always expect complete blocks to process
+       * the tar information.
+       */
+      if (len != BLOCKSIZE)
+	error("gzread: incomplete block read");
+      
+      /*
+       * If we have to get a tar header
+       */
+      if (getheader == 1)
+	{
+	  /*
+	   * if we met the end of the tar
+	   * or the end-of-tar block,
+	   * we are done
+	   */
+	  if ((len == 0)  || (buffer.header.name[0]== 0)) break;
+
+	  tartime = (time_t)getoct(buffer.header.mtime,12);
+	  strcpy(fname,buffer.header.name);
+	  
+	  switch (buffer.header.typeflag)
+	    {
+	    case DIRTYPE:
+	      if (action == TGZ_LIST)
+		printf(" %s     <dir> %s\n",strtime(&tartime),fname);
+	      if (action == TGZ_EXTRACT)
+		makedir(fname);
+	      break;
+	    case REGTYPE:
+	    case AREGTYPE:
+	      remaining = getoct(buffer.header.size,12);
+	      if (action == TGZ_LIST)
+		printf(" %s %9d %s\n",strtime(&tartime),remaining,fname);
+	      if (action == TGZ_EXTRACT)
+		{
+		  if ((remaining) && (matchname(arg,argc,argv,fname)))
+		    {
+		      outfile = fopen(fname,"wb");
+		      if (outfile == NULL) {
+			/* try creating directory */
+			char *p = strrchr(fname, '/');
+			if (p != NULL) {
+			  *p = '\0';
+			  makedir(fname);
+			  *p = '/';
+			  outfile = fopen(fname,"wb");
+			}
+		      }
+		      fprintf(stderr,
+			      "%s %s\n",
+			      (outfile) ? "Extracting" : "Couldn't create",
+			      fname);
+		    }
+		  else
+		    outfile = NULL;
+		}
+	      /*
+	       * could have no contents
+	       */
+	      getheader = (remaining) ? 0 : 1;
+	      break;
+	    default:
+	      if (action == TGZ_LIST)
+		printf(" %s     <---> %s\n",strtime(&tartime),fname);
+	      break;
+	    }
+	}
+      else
+	{
+	  unsigned int bytes = (remaining > BLOCKSIZE) ? BLOCKSIZE : remaining;
+
+	  if ((action == TGZ_EXTRACT) && (outfile != NULL))
+	    {
+	      if (fwrite(&buffer,sizeof(char),bytes,outfile) != bytes)
+		{
+		  fprintf(stderr,"%s : error writing %s skipping...\n",prog,fname);
+		  fclose(outfile);
+		  unlink(fname);
+		}
+	    }
+	  remaining -= bytes;
+	  if (remaining == 0)
+	    {
+	      getheader = 1;
+	      if ((action == TGZ_EXTRACT) && (outfile != NULL))
+		{
+#ifdef WIN32
+		  HANDLE hFile;
+		  FILETIME ftm,ftLocal;
+		  SYSTEMTIME st;
+		  struct tm localt;
+ 
+		  fclose(outfile);
+
+		  localt = *localtime(&tartime);
+
+		  hFile = CreateFile(fname, GENERIC_READ | GENERIC_WRITE,
+				     0, NULL, OPEN_EXISTING, 0, NULL);
+		  
+		  st.wYear = (WORD)localt.tm_year+1900;
+		  st.wMonth = (WORD)localt.tm_mon;
+		  st.wDayOfWeek = (WORD)localt.tm_wday;
+		  st.wDay = (WORD)localt.tm_mday;
+		  st.wHour = (WORD)localt.tm_hour;
+		  st.wMinute = (WORD)localt.tm_min;
+		  st.wSecond = (WORD)localt.tm_sec;
+		  st.wMilliseconds = 0;
+		  SystemTimeToFileTime(&st,&ftLocal);
+		  LocalFileTimeToFileTime(&ftLocal,&ftm);
+		  SetFileTime(hFile,&ftm,NULL,&ftm);
+		  CloseHandle(hFile);
+
+		  outfile = NULL;
+#else
+		  struct utimbuf settime;
+
+		  settime.actime = settime.modtime = tartime;
+
+		  fclose(outfile);
+		  outfile = NULL;
+		  utime(fname,&settime);
+#endif
+		}
+	    }
+	}
+    }
+  
+  if (gzclose(in) != Z_OK)
+    error("failed gzclose");
+
+  return 0;
+}
+
+
+/* =========================================================== */
+
+void help(int exitval)
+{
+  fprintf(stderr,
+	  "untgz v 0.1\n"
+	  " an sample application of zlib 1.0.4\n\n"
+          "Usage : untgz TGZfile            to extract all files\n"
+          "        untgz TGZfile fname ...  to extract selected files\n"
+          "        untgz -l TGZfile         to list archive contents\n"
+          "        untgz -h                 to display this help\n\n");
+  exit(exitval);
+}
+
+void error(const char *msg)
+{
+    fprintf(stderr, "%s: %s\n", prog, msg);
+    exit(1);
+}
+
+
+/* ====================================================================== */
+
+int _CRT_glob = 0;	/* disable globbing of the arguments */
+
+int main(int argc,char **argv)
+{
+    int 	action = TGZ_EXTRACT;
+    int 	arg = 1;
+    char	*TGZfile;
+    gzFile	*f;
+    
+
+    prog = strrchr(argv[0],'\\');
+    if (prog == NULL)
+      {
+	prog = strrchr(argv[0],'/');
+	if (prog == NULL)
+	  {
+	    prog = strrchr(argv[0],':');
+	    if (prog == NULL)
+	      prog = argv[0];
+	    else
+	      prog++;
+	  }
+	else
+	  prog++;
+      }
+    else
+      prog++;
+    
+    if (argc == 1)
+      help(0);
+
+    if (strcmp(argv[arg],"-l") == 0)
+      {
+	action = TGZ_LIST;
+	if (argc == ++arg)
+	  help(0);
+      }
+    else if (strcmp(argv[arg],"-h") == 0)
+      {
+	help(0);
+      }
+
+    if ((TGZfile = TGZfname(argv[arg])) == NULL)
+      TGZnotfound(argv[arg]);            
+
+    ++arg;
+    if ((action == TGZ_LIST) && (arg != argc))
+      help(1);
+
+/*
+ *  Process the TGZ file
+ */
+    switch(action)
+      {
+      case TGZ_LIST:
+      case TGZ_EXTRACT:
+	f = gzopen(TGZfile,"rb");
+	if (f == NULL)
+	  {
+	    fprintf(stderr,"%s: Couldn't gzopen %s\n",
+		    prog,
+		    TGZfile);
+	    return 1;
+	  }
+	exit(tar(f, action, arg, argc, argv));
+      break;
+	
+      default:
+	error("Unknown option!");
+	exit(1);
+      }
+
+    return 0;
+}

contrib/visual-basic.txt

@@ -0,0 +1,69 @@
+See below some functions declarations for Visual Basic.
+
+Frequently Asked Question:
+
+Q: Each time I use the compress function I get the -5 error (not enough
+   room in the output buffer).
+
+A: Make sure that the length of the compressed buffer is passed by
+   reference ("as any"), not by value ("as long"). Also check that
+   before the call of compress this length is equal to the total size of
+   the compressed buffer and not zero.
+
+
+From: "Jon Caruana" <jon-net@usa.net>
+Subject: Re: How to port zlib declares to vb?
+Date: Mon, 28 Oct 1996 18:33:03 -0600
+
+Got the answer! (I haven't had time to check this but it's what I got, and
+looks correct):
+
+He has the following routines working:
+        compress
+        uncompress
+        gzopen
+        gzwrite
+        gzread
+        gzclose
+
+Declares follow: (Quoted from Carlos Rios <c_rios@sonda.cl>, in Vb4 form)
+
+#If Win16 Then   'Use Win16 calls.
+Declare Function compress Lib "ZLIB.DLL" (ByVal compr As
+        String, comprLen As Any, ByVal buf As String, ByVal buflen
+        As Long) As Integer
+Declare Function uncompress Lib "ZLIB.DLL" (ByVal uncompr
+        As String, uncomprLen As Any, ByVal compr As String, ByVal
+        lcompr As Long) As Integer
+Declare Function gzopen Lib "ZLIB.DLL" (ByVal filePath As
+        String, ByVal mode As String) As Long
+Declare Function gzread Lib "ZLIB.DLL" (ByVal file As
+        Long, ByVal uncompr As String, ByVal uncomprLen As Integer)
+        As Integer
+Declare Function gzwrite Lib "ZLIB.DLL" (ByVal file As
+        Long, ByVal uncompr As String, ByVal uncomprLen As Integer)
+        As Integer
+Declare Function gzclose Lib "ZLIB.DLL" (ByVal file As
+        Long) As Integer
+#Else
+Declare Function compress Lib "ZLIB32.DLL"
+        (ByVal compr As String, comprLen As Any, ByVal buf As
+        String, ByVal buflen As Long) As Integer
+Declare Function uncompress Lib "ZLIB32.DLL"
+        (ByVal uncompr As String, uncomprLen As Any, ByVal compr As
+        String, ByVal lcompr As Long) As Long
+Declare Function gzopen Lib "ZLIB32.DLL"
+        (ByVal file As String, ByVal mode As String) As Long
+Declare Function gzread Lib "ZLIB32.DLL"
+        (ByVal file As Long, ByVal uncompr As String, ByVal
+        uncomprLen As Long) As Long
+Declare Function gzwrite Lib "ZLIB32.DLL"
+        (ByVal file As Long, ByVal uncompr As String, ByVal
+        uncomprLen As Long) As Long
+Declare Function gzclose Lib "ZLIB32.DLL"
+        (ByVal file As Long) As Long
+#End If
+
+-Jon Caruana
+jon-net@usa.net
+Microsoft Sitebuilder Network Level 1 Member - HTML Writer's Guild Member

crc32.c

@@ -1,9 +1,9 @@
 /* crc32.c -- compute the CRC-32 of a data stream
- * Copyright (C) 1995-1996 Mark Adler
+ * Copyright (C) 1995-2002 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
-/* $Id: crc32.c,v 1.4 1995/04/14 14:55:12 jloup Exp $ */
+/* @(#) $Id$ */
 
 #include "zlib.h"
 
@@ -45,7 +45,7 @@ local void make_crc_table()
   int n, k;
   uLong poly;            /* polynomial exclusive-or pattern */
   /* terms of polynomial defining this crc (except x^32): */
-  static Byte p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
+  static const Byte p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
 
   /* make exclusive-or pattern from polynomial (0xedb88320L) */
   poly = 0L;
@@ -65,7 +65,7 @@ local void make_crc_table()
 /* ========================================================================
  * Table of CRC-32's of all single-byte values (made by make_crc_table)
  */
-local uLongf crc_table[256] = {
+local const uLongf crc_table[256] = {
   0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L,
   0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L,
   0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L,
@@ -124,12 +124,12 @@ local uLongf crc_table[256] = {
 /* =========================================================================
  * This function can be used by asm versions of crc32()
  */
-uLongf *get_crc_table()
+const uLongf * ZEXPORT get_crc_table()
 {
 #ifdef DYNAMIC_CRC_TABLE
   if (crc_table_empty) make_crc_table();
 #endif
-  return (uLongf *)crc_table;
+  return (const uLongf *)crc_table;
 }
 
 /* ========================================================================= */
@@ -139,7 +139,7 @@ uLongf *get_crc_table()
 #define DO8(buf)  DO4(buf); DO4(buf);
 
 /* ========================================================================= */
-uLong crc32(crc, buf, len)
+uLong ZEXPORT crc32(crc, buf, len)
     uLong crc;
     const Bytef *buf;
     uInt len;

deflate.c

@@ -1,5 +1,5 @@
 /* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995-1996 Jean-loup Gailly.
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -36,8 +36,8 @@
  *
  *  REFERENCES
  *
- *      Deutsch, L.P.,"'Deflate' Compressed Data Format Specification".
- *      Available in ftp.uu.net:/pub/archiving/zip/doc/deflate-1.1.doc
+ *      Deutsch, L.P.,"DEFLATE Compressed Data Format Specification".
+ *      Available in ftp://ds.internic.net/rfc/rfc1951.txt
  *
  *      A description of the Rabin and Karp algorithm is given in the book
  *         "Algorithms" by R. Sedgewick, Addison-Wesley, p252.
@@ -47,11 +47,12 @@
  *
  */
 
-/* $Id: deflate.c,v 1.8 1995/05/03 17:27:08 jloup Exp $ */
+/* @(#) $Id$ */
 
 #include "deflate.h"
 
-char deflate_copyright[] = " deflate 1.0 Copyright 1995-1996 Jean-loup Gailly ";
+const char deflate_copyright[] =
+   " deflate 1.1.4 Copyright 1995-2002 Jean-loup Gailly ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -62,17 +63,29 @@ char deflate_copyright[] = " deflate 1.0 Copyright 1995-1996 Jean-loup Gailly ";
 /* ===========================================================================
  *  Function prototypes.
  */
+typedef enum {
+    need_more,      /* block not completed, need more input or more output */
+    block_done,     /* block flush performed */
+    finish_started, /* finish started, need only more output at next deflate */
+    finish_done     /* finish done, accept no more input or output */
+} block_state;
+
+typedef block_state (*compress_func) OF((deflate_state *s, int flush));
+/* Compression function. Returns the block state after the call. */
+
 local void fill_window    OF((deflate_state *s));
-local int  deflate_stored OF((deflate_state *s, int flush));
-local int  deflate_fast   OF((deflate_state *s, int flush));
-local int  deflate_slow   OF((deflate_state *s, int flush));
+local block_state deflate_stored OF((deflate_state *s, int flush));
+local block_state deflate_fast   OF((deflate_state *s, int flush));
+local block_state deflate_slow   OF((deflate_state *s, int flush));
 local void lm_init        OF((deflate_state *s));
-local int longest_match   OF((deflate_state *s, IPos cur_match));
 local void putShortMSB    OF((deflate_state *s, uInt b));
-local void flush_pending  OF((z_stream *strm));
-local int read_buf        OF((z_stream *strm, charf *buf, unsigned size));
+local void flush_pending  OF((z_streamp strm));
+local int read_buf        OF((z_streamp strm, Bytef *buf, unsigned size));
 #ifdef ASMV
       void match_init OF((void)); /* asm code initialization */
+      uInt longest_match  OF((deflate_state *s, IPos cur_match));
+#else
+local uInt longest_match  OF((deflate_state *s, IPos cur_match));
 #endif
 
 #ifdef DEBUG
@@ -97,9 +110,6 @@ local  void check_match OF((deflate_state *s, IPos start, IPos match,
  * See deflate.c for comments about the MIN_MATCH+1.
  */
 
-typedef int (*compress_func) OF((deflate_state *s, int flush));
-/* Compressing function */
-
 /* Values for max_lazy_match, good_match and max_chain_length, depending on
  * the desired pack level (0..9). The values given below have been tuned to
  * exclude worst case performance for pathological files. Better values may be
@@ -113,7 +123,7 @@ typedef struct config_s {
    compress_func func;
 } config;
 
-local config configuration_table[10] = {
+local const config configuration_table[10] = {
 /*      good lazy nice chain */
 /* 0 */ {0,    0,  0,    0, deflate_stored},  /* store only */
 /* 1 */ {4,    4,  8,    4, deflate_fast}, /* maximum speed, no lazy matches */
@@ -150,14 +160,23 @@ struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
  * Insert string str in the dictionary and set match_head to the previous head
  * of the hash chain (the most recent string with same hash key). Return
  * the previous length of the hash chain.
+ * If this file is compiled with -DFASTEST, the compression level is forced
+ * to 1, and no hash chains are maintained.
  * IN  assertion: all calls to to INSERT_STRING are made with consecutive
  *    input characters and the first MIN_MATCH bytes of str are valid
  *    (except for the last MIN_MATCH-1 bytes of the input file).
  */
+#ifdef FASTEST
+#define INSERT_STRING(s, str, match_head) \
+   (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
+    match_head = s->head[s->ins_h], \
+    s->head[s->ins_h] = (Pos)(str))
+#else
 #define INSERT_STRING(s, str, match_head) \
    (UPDATE_HASH(s, s->ins_h, s->window[(str) + (MIN_MATCH-1)]), \
     s->prev[(str) & s->w_mask] = match_head = s->head[s->ins_h], \
-    s->head[s->ins_h] = (str))
+    s->head[s->ins_h] = (Pos)(str))
+#endif
 
 /* ===========================================================================
  * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
@@ -165,11 +184,11 @@ struct static_tree_desc_s {int dummy;}; /* for buggy compilers */
  */
 #define CLEAR_HASH(s) \
     s->head[s->hash_size-1] = NIL; \
-    zmemzero((charf *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
+    zmemzero((Bytef *)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
 
 /* ========================================================================= */
-int deflateInit_(strm, level, version, stream_size)
-    z_stream *strm;
+int ZEXPORT deflateInit_(strm, level, version, stream_size)
+    z_streamp strm;
     int level;
     const char *version;
     int stream_size;
@@ -180,9 +199,9 @@ int deflateInit_(strm, level, version, stream_size)
 }
 
 /* ========================================================================= */
-int deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
+int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
 		  version, stream_size)
-    z_stream *strm;
+    z_streamp strm;
     int  level;
     int  method;
     int  windowBits;
@@ -193,8 +212,14 @@ int deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
 {
     deflate_state *s;
     int noheader = 0;
+    static const char* my_version = ZLIB_VERSION;
 
-    if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+    ushf *overlay;
+    /* We overlay pending_buf and d_buf+l_buf. This works since the average
+     * output size for (length,distance) codes is <= 24 bits.
+     */
+
+    if (version == Z_NULL || version[0] != my_version[0] ||
         stream_size != sizeof(z_stream)) {
 	return Z_VERSION_ERROR;
     }
@@ -208,13 +233,16 @@ int deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
     if (strm->zfree == Z_NULL) strm->zfree = zcfree;
 
     if (level == Z_DEFAULT_COMPRESSION) level = 6;
+#ifdef FASTEST
+    level = 1;
+#endif
 
     if (windowBits < 0) { /* undocumented feature: suppress zlib header */
         noheader = 1;
         windowBits = -windowBits;
     }
     if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
-        windowBits < 8 || windowBits > 15 || level < 0 || level > 9 ||
+        windowBits < 9 || windowBits > 15 || level < 0 || level > 9 ||
 	strategy < 0 || strategy > Z_HUFFMAN_ONLY) {
         return Z_STREAM_ERROR;
     }
@@ -239,20 +267,18 @@ int deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
 
     s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
 
-    s->pending_buf = (uchf *) ZALLOC(strm, s->lit_bufsize, 2*sizeof(ush));
+    overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2);
+    s->pending_buf = (uchf *) overlay;
+    s->pending_buf_size = (ulg)s->lit_bufsize * (sizeof(ush)+2L);
 
     if (s->window == Z_NULL || s->prev == Z_NULL || s->head == Z_NULL ||
         s->pending_buf == Z_NULL) {
-        strm->msg = ERR_MSG(Z_MEM_ERROR);
+        strm->msg = (char*)ERR_MSG(Z_MEM_ERROR);
         deflateEnd (strm);
         return Z_MEM_ERROR;
     }
-    s->l_buf = (uchf *) &(s->pending_buf[s->lit_bufsize]);
-    s->d_buf = (ushf *) &(s->pending_buf[2*s->lit_bufsize]);
-    /* We overlay pending_buf and d_buf+l_buf. This works since the average
-     * output size for (length,distance) codes is <= 32 bits (worst case
-     * is 15+15+13=33). d_buf is put last in case sizeof(short)>2.
-     */
+    s->d_buf = overlay + s->lit_bufsize/sizeof(ush);
+    s->l_buf = s->pending_buf + (1+sizeof(ush))*s->lit_bufsize;
 
     s->level = level;
     s->strategy = strategy;
@@ -262,15 +288,15 @@ int deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
 }
 
 /* ========================================================================= */
-int deflateSetDictionary (strm, dictionary, dictLength)
-    z_stream *strm;
+int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
+    z_streamp strm;
     const Bytef *dictionary;
     uInt  dictLength;
 {
     deflate_state *s;
     uInt length = dictLength;
     uInt n;
-    IPos hash_head;
+    IPos hash_head = 0;
 
     if (strm == Z_NULL || strm->state == Z_NULL || dictionary == Z_NULL ||
         strm->state->status != INIT_STATE) return Z_STREAM_ERROR;
@@ -281,9 +307,11 @@ int deflateSetDictionary (strm, dictionary, dictLength)
     if (length < MIN_MATCH) return Z_OK;
     if (length > MAX_DIST(s)) {
 	length = MAX_DIST(s);
-	dictionary += dictLength - length;
+#ifndef USE_DICT_HEAD
+	dictionary += dictLength - length; /* use the tail of the dictionary */
+#endif
     }
-    zmemcpy((charf *)s->window, dictionary, length);
+    zmemcpy(s->window, dictionary, length);
     s->strstart = length;
     s->block_start = (long)length;
 
@@ -296,12 +324,13 @@ int deflateSetDictionary (strm, dictionary, dictLength)
     for (n = 0; n <= length - MIN_MATCH; n++) {
 	INSERT_STRING(s, n, hash_head);
     }
+    if (hash_head) hash_head = 0;  /* to make compiler happy */
     return Z_OK;
 }
 
 /* ========================================================================= */
-int deflateReset (strm)
-    z_stream *strm;
+int ZEXPORT deflateReset (strm)
+    z_streamp strm;
 {
     deflate_state *s;
     
@@ -330,13 +359,14 @@ int deflateReset (strm)
 }
 
 /* ========================================================================= */
-int deflateParams(strm, level, strategy)
-    z_stream *strm;
+int ZEXPORT deflateParams(strm, level, strategy)
+    z_streamp strm;
     int level;
     int strategy;
 {
     deflate_state *s;
     compress_func func;
+    int err = Z_OK;
 
     if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
     s = strm->state;
@@ -349,11 +379,9 @@ int deflateParams(strm, level, strategy)
     }
     func = configuration_table[s->level].func;
 
-    if (func != configuration_table[level].func
-	&& strm->state->lookahead != 0) {
-
+    if (func != configuration_table[level].func && strm->total_in != 0) {
 	/* Flush the last buffer: */
-	(void)(*func)(strm->state, Z_PARTIAL_FLUSH);
+	err = deflate(strm, Z_PARTIAL_FLUSH);
     }
     if (s->level != level) {
 	s->level = level;
@@ -363,7 +391,7 @@ int deflateParams(strm, level, strategy)
 	s->max_chain_length = configuration_table[level].max_chain;
     }
     s->strategy = strategy;
-    return Z_OK;
+    return err;
 }
 
 /* =========================================================================
@@ -386,7 +414,7 @@ local void putShortMSB (s, b)
  * (See also read_buf()).
  */
 local void flush_pending(strm)
-    z_stream *strm;
+    z_streamp strm;
 {
     unsigned len = strm->state->pending;
 
@@ -405,15 +433,17 @@ local void flush_pending(strm)
 }
 
 /* ========================================================================= */
-int deflate (strm, flush)
-    z_stream *strm;
+int ZEXPORT deflate (strm, flush)
+    z_streamp strm;
     int flush;
 {
     int old_flush; /* value of flush param for previous deflate call */
     deflate_state *s;
 
-    if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
-    
+    if (strm == Z_NULL || strm->state == Z_NULL ||
+	flush > Z_FINISH || flush < 0) {
+        return Z_STREAM_ERROR;
+    }
     s = strm->state;
 
     if (strm->next_out == Z_NULL ||
@@ -445,14 +475,23 @@ int deflate (strm, flush)
 	if (s->strstart != 0) {
 	    putShortMSB(s, (uInt)(strm->adler >> 16));
 	    putShortMSB(s, (uInt)(strm->adler & 0xffff));
-	    strm->adler = 1L;
 	}
+	strm->adler = 1L;
     }
 
     /* Flush as much pending output as possible */
     if (s->pending != 0) {
         flush_pending(strm);
-        if (strm->avail_out == 0) return Z_OK;
+        if (strm->avail_out == 0) {
+	    /* Since avail_out is 0, deflate will be called again with
+	     * more output space, but possibly with both pending and
+	     * avail_in equal to zero. There won't be anything to do,
+	     * but this is not an error situation so make sure we
+	     * return OK instead of BUF_ERROR at next call of deflate:
+             */
+	    s->last_flush = -1;
+	    return Z_OK;
+	}
 
     /* Make sure there is something to do and avoid duplicate consecutive
      * flushes. For repeated and useless calls with Z_FINISH, we keep
@@ -472,22 +511,27 @@ int deflate (strm, flush)
      */
     if (strm->avail_in != 0 || s->lookahead != 0 ||
         (flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
-        int quit;
+        block_state bstate;
 
-        if (flush == Z_FINISH) {
+	bstate = (*(configuration_table[s->level].func))(s, flush);
+
+        if (bstate == finish_started || bstate == finish_done) {
             s->status = FINISH_STATE;
         }
-	quit = (*(configuration_table[s->level].func))(s, flush);
-
-        if (quit || strm->avail_out == 0) return Z_OK;
-        /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
-         * of deflate should use the same flush parameter to make sure
-         * that the flush is complete. So we don't have to output an
-         * empty block here, this will be done at next call. This also
-         * ensures that for a very small output buffer, we emit at most
-         * one empty block.
-         */
-        if (flush != Z_NO_FLUSH && flush != Z_FINISH) {
+        if (bstate == need_more || bstate == finish_started) {
+	    if (strm->avail_out == 0) {
+	        s->last_flush = -1; /* avoid BUF_ERROR next call, see above */
+	    }
+	    return Z_OK;
+	    /* If flush != Z_NO_FLUSH && avail_out == 0, the next call
+	     * of deflate should use the same flush parameter to make sure
+	     * that the flush is complete. So we don't have to output an
+	     * empty block here, this will be done at next call. This also
+	     * ensures that for a very small output buffer, we emit at most
+	     * one empty block.
+	     */
+	}
+        if (bstate == block_done) {
             if (flush == Z_PARTIAL_FLUSH) {
                 _tr_align(s);
             } else { /* FULL_FLUSH or SYNC_FLUSH */
@@ -500,7 +544,10 @@ int deflate (strm, flush)
                 }
             }
             flush_pending(strm);
-            if (strm->avail_out == 0) return Z_OK;
+	    if (strm->avail_out == 0) {
+	      s->last_flush = -1; /* avoid BUF_ERROR at next call, see above */
+	      return Z_OK;
+	    }
         }
     }
     Assert(strm->avail_out > 0, "bug2");
@@ -520,42 +567,87 @@ int deflate (strm, flush)
 }
 
 /* ========================================================================= */
-int deflateEnd (strm)
-    z_stream *strm;
+int ZEXPORT deflateEnd (strm)
+    z_streamp strm;
 {
     int status;
 
     if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
 
+    status = strm->state->status;
+    if (status != INIT_STATE && status != BUSY_STATE &&
+	status != FINISH_STATE) {
+      return Z_STREAM_ERROR;
+    }
+
     /* Deallocate in reverse order of allocations: */
     TRY_FREE(strm, strm->state->pending_buf);
     TRY_FREE(strm, strm->state->head);
     TRY_FREE(strm, strm->state->prev);
     TRY_FREE(strm, strm->state->window);
 
-    status = strm->state->status;
     ZFREE(strm, strm->state);
     strm->state = Z_NULL;
 
     return status == BUSY_STATE ? Z_DATA_ERROR : Z_OK;
 }
 
-/* ========================================================================= */
-int deflateCopy (dest, source)
-    z_stream *dest;
-    z_stream *source;
+/* =========================================================================
+ * Copy the source state to the destination state.
+ * To simplify the source, this is not supported for 16-bit MSDOS (which
+ * doesn't have enough memory anyway to duplicate compression states).
+ */
+int ZEXPORT deflateCopy (dest, source)
+    z_streamp dest;
+    z_streamp source;
 {
+#ifdef MAXSEG_64K
+    return Z_STREAM_ERROR;
+#else
+    deflate_state *ds;
+    deflate_state *ss;
+    ushf *overlay;
+
+
     if (source == Z_NULL || dest == Z_NULL || source->state == Z_NULL) {
         return Z_STREAM_ERROR;
     }
-    *dest = *source;
-    return Z_STREAM_ERROR; /* to be implemented */
-#if 0
-    dest->state = (struct internal_state FAR *)
-        (*dest->zalloc)(1, sizeof(deflate_state));
-    if (dest->state == Z_NULL) return Z_MEM_ERROR;
 
-    *(dest->state) = *(source->state);
+    ss = source->state;
+
+    *dest = *source;
+
+    ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
+    if (ds == Z_NULL) return Z_MEM_ERROR;
+    dest->state = (struct internal_state FAR *) ds;
+    *ds = *ss;
+    ds->strm = dest;
+
+    ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
+    ds->prev   = (Posf *)  ZALLOC(dest, ds->w_size, sizeof(Pos));
+    ds->head   = (Posf *)  ZALLOC(dest, ds->hash_size, sizeof(Pos));
+    overlay = (ushf *) ZALLOC(dest, ds->lit_bufsize, sizeof(ush)+2);
+    ds->pending_buf = (uchf *) overlay;
+
+    if (ds->window == Z_NULL || ds->prev == Z_NULL || ds->head == Z_NULL ||
+        ds->pending_buf == Z_NULL) {
+        deflateEnd (dest);
+        return Z_MEM_ERROR;
+    }
+    /* following zmemcpy do not work for 16-bit MSDOS */
+    zmemcpy(ds->window, ss->window, ds->w_size * 2 * sizeof(Byte));
+    zmemcpy(ds->prev, ss->prev, ds->w_size * sizeof(Pos));
+    zmemcpy(ds->head, ss->head, ds->hash_size * sizeof(Pos));
+    zmemcpy(ds->pending_buf, ss->pending_buf, (uInt)ds->pending_buf_size);
+
+    ds->pending_out = ds->pending_buf + (ss->pending_out - ss->pending_buf);
+    ds->d_buf = overlay + ds->lit_bufsize/sizeof(ush);
+    ds->l_buf = ds->pending_buf + (1+sizeof(ush))*ds->lit_bufsize;
+
+    ds->l_desc.dyn_tree = ds->dyn_ltree;
+    ds->d_desc.dyn_tree = ds->dyn_dtree;
+    ds->bl_desc.dyn_tree = ds->bl_tree;
+
     return Z_OK;
 #endif
 }
@@ -568,8 +660,8 @@ int deflateCopy (dest, source)
  * (See also flush_pending()).
  */
 local int read_buf(strm, buf, size)
-    z_stream *strm;
-    charf *buf;
+    z_streamp strm;
+    Bytef *buf;
     unsigned size;
 {
     unsigned len = strm->avail_in;
@@ -630,7 +722,8 @@ local void lm_init (s)
 /* For 80x86 and 680x0, an optimized version will be provided in match.asm or
  * match.S. The code will be functionally equivalent.
  */
-local int longest_match(s, cur_match)
+#ifndef FASTEST
+local uInt longest_match(s, cur_match)
     deflate_state *s;
     IPos cur_match;                             /* current match */
 {
@@ -673,7 +766,7 @@ local int longest_match(s, cur_match)
     /* Do not look for matches beyond the end of the input. This is necessary
      * to make deflate deterministic.
      */
-    if (nice_match > s->lookahead) nice_match = s->lookahead;
+    if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
 
     Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
 
@@ -764,9 +857,67 @@ local int longest_match(s, cur_match)
     } while ((cur_match = prev[cur_match & wmask]) > limit
              && --chain_length != 0);
 
-    if (best_len <= s->lookahead) return best_len;
+    if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
     return s->lookahead;
 }
+
+#else /* FASTEST */
+/* ---------------------------------------------------------------------------
+ * Optimized version for level == 1 only
+ */
+local uInt longest_match(s, cur_match)
+    deflate_state *s;
+    IPos cur_match;                             /* current match */
+{
+    register Bytef *scan = s->window + s->strstart; /* current string */
+    register Bytef *match;                       /* matched string */
+    register int len;                           /* length of current match */
+    register Bytef *strend = s->window + s->strstart + MAX_MATCH;
+
+    /* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
+     * It is easy to get rid of this optimization if necessary.
+     */
+    Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
+
+    Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
+
+    Assert(cur_match < s->strstart, "no future");
+
+    match = s->window + cur_match;
+
+    /* Return failure if the match length is less than 2:
+     */
+    if (match[0] != scan[0] || match[1] != scan[1]) return MIN_MATCH-1;
+
+    /* The check at best_len-1 can be removed because it will be made
+     * again later. (This heuristic is not always a win.)
+     * It is not necessary to compare scan[2] and match[2] since they
+     * are always equal when the other bytes match, given that
+     * the hash keys are equal and that HASH_BITS >= 8.
+     */
+    scan += 2, match += 2;
+    Assert(*scan == *match, "match[2]?");
+
+    /* We check for insufficient lookahead only every 8th comparison;
+     * the 256th check will be made at strstart+258.
+     */
+    do {
+    } while (*++scan == *++match && *++scan == *++match &&
+	     *++scan == *++match && *++scan == *++match &&
+	     *++scan == *++match && *++scan == *++match &&
+	     *++scan == *++match && *++scan == *++match &&
+	     scan < strend);
+
+    Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
+
+    len = MAX_MATCH - (int)(strend - scan);
+
+    if (len < MIN_MATCH) return MIN_MATCH - 1;
+
+    s->match_start = cur_match;
+    return len <= s->lookahead ? len : s->lookahead;
+}
+#endif /* FASTEST */
 #endif /* ASMV */
 
 #ifdef DEBUG
@@ -779,8 +930,8 @@ local void check_match(s, start, match, length)
     int length;
 {
     /* check that the match is indeed a match */
-    if (zmemcmp((charf *)s->window + match,
-                (charf *)s->window + start, length) != EQUAL) {
+    if (zmemcmp(s->window + match,
+                s->window + start, length) != EQUAL) {
         fprintf(stderr, " start %u, match %u, length %d\n",
 		start, match, length);
         do {
@@ -788,7 +939,7 @@ local void check_match(s, start, match, length)
 	} while (--length != 0);
         z_error("invalid match");
     }
-    if (verbose > 1) {
+    if (z_verbose > 1) {
         fprintf(stderr,"\\[%d,%d]", start-match, length);
         do { putc(s->window[start++], stderr); } while (--length != 0);
     }
@@ -833,33 +984,35 @@ local void fill_window(s)
          */
         } else if (s->strstart >= wsize+MAX_DIST(s)) {
 
-            zmemcpy((charf *)s->window, (charf *)s->window+wsize,
-                   (unsigned)wsize);
+            zmemcpy(s->window, s->window+wsize, (unsigned)wsize);
             s->match_start -= wsize;
             s->strstart    -= wsize; /* we now have strstart >= MAX_DIST */
-
             s->block_start -= (long) wsize;
 
             /* Slide the hash table (could be avoided with 32 bit values
-               at the expense of memory usage):
+               at the expense of memory usage). We slide even when level == 0
+               to keep the hash table consistent if we switch back to level > 0
+               later. (Using level 0 permanently is not an optimal usage of
+               zlib, so we don't care about this pathological case.)
              */
-            n = s->hash_size;
-            p = &s->head[n];
-            do {
-                m = *--p;
-                *p = (Pos)(m >= wsize ? m-wsize : NIL);
-            } while (--n);
-
-            n = wsize;
-            p = &s->prev[n];
-            do {
-                m = *--p;
-                *p = (Pos)(m >= wsize ? m-wsize : NIL);
-                /* If n is not on any hash chain, prev[n] is garbage but
-                 * its value will never be used.
-                 */
-            } while (--n);
+	    n = s->hash_size;
+	    p = &s->head[n];
+	    do {
+		m = *--p;
+		*p = (Pos)(m >= wsize ? m-wsize : NIL);
+	    } while (--n);
 
+	    n = wsize;
+#ifndef FASTEST
+	    p = &s->prev[n];
+	    do {
+		m = *--p;
+		*p = (Pos)(m >= wsize ? m-wsize : NIL);
+		/* If n is not on any hash chain, prev[n] is garbage but
+		 * its value will never be used.
+		 */
+	    } while (--n);
+#endif
             more += wsize;
         }
         if (s->strm->avail_in == 0) return;
@@ -877,8 +1030,7 @@ local void fill_window(s)
          */
         Assert(more >= 2, "more < 2");
 
-        n = read_buf(s->strm, (charf *)s->window + s->strstart + s->lookahead,
-                     more);
+        n = read_buf(s->strm, s->window + s->strstart + s->lookahead, more);
         s->lookahead += n;
 
         /* Initialize the hash value now that we have some input: */
@@ -914,21 +1066,33 @@ local void fill_window(s)
 /* Same but force premature exit if necessary. */
 #define FLUSH_BLOCK(s, eof) { \
    FLUSH_BLOCK_ONLY(s, eof); \
-   if (s->strm->avail_out == 0) return 1; \
+   if (s->strm->avail_out == 0) return (eof) ? finish_started : need_more; \
 }
 
 /* ===========================================================================
  * Copy without compression as much as possible from the input stream, return
- * true if processing was terminated prematurely (no more input or output
- * space).  This function does not insert new strings in the dictionary
- * since uncompressible data is probably not useful. This function is used
+ * the current block state.
+ * This function does not insert new strings in the dictionary since
+ * uncompressible data is probably not useful. This function is used
  * only for the level=0 compression option.
- * NOTE: this function should be optimized to avoid extra copying.
+ * NOTE: this function should be optimized to avoid extra copying from
+ * window to pending_buf.
  */
-local int deflate_stored(s, flush)
+local block_state deflate_stored(s, flush)
     deflate_state *s;
     int flush;
 {
+    /* Stored blocks are limited to 0xffff bytes, pending_buf is limited
+     * to pending_buf_size, and each stored block has a 5 byte header:
+     */
+    ulg max_block_size = 0xffff;
+    ulg max_start;
+
+    if (max_block_size > s->pending_buf_size - 5) {
+        max_block_size = s->pending_buf_size - 5;
+    }
+
+    /* Copy as much as possible from input to output: */
     for (;;) {
         /* Fill the window as much as possible: */
         if (s->lookahead <= 1) {
@@ -937,7 +1101,7 @@ local int deflate_stored(s, flush)
 		   s->block_start >= (long)s->w_size, "slide too late");
 
             fill_window(s);
-            if (s->lookahead == 0 && flush == Z_NO_FLUSH) return 1;
+            if (s->lookahead == 0 && flush == Z_NO_FLUSH) return need_more;
 
             if (s->lookahead == 0) break; /* flush the current block */
         }
@@ -946,30 +1110,33 @@ local int deflate_stored(s, flush)
 	s->strstart += s->lookahead;
 	s->lookahead = 0;
 
-        /* Stored blocks are limited to 0xffff bytes: */
-        if (s->strstart == 0 || s->strstart > 0xffff) {
+	/* Emit a stored block if pending_buf will be full: */
+ 	max_start = s->block_start + max_block_size;
+        if (s->strstart == 0 || (ulg)s->strstart >= max_start) {
 	    /* strstart == 0 is possible when wraparound on 16-bit machine */
-	    s->lookahead = s->strstart - 0xffff;
-	    s->strstart = 0xffff;
+	    s->lookahead = (uInt)(s->strstart - max_start);
+	    s->strstart = (uInt)max_start;
+            FLUSH_BLOCK(s, 0);
 	}
-
-	/* Emit a stored block if it is large enough: */
+	/* Flush if we may have to slide, otherwise block_start may become
+         * negative and the data will be gone:
+         */
         if (s->strstart - (uInt)s->block_start >= MAX_DIST(s)) {
             FLUSH_BLOCK(s, 0);
 	}
     }
     FLUSH_BLOCK(s, flush == Z_FINISH);
-    return 0; /* normal exit */
+    return flush == Z_FINISH ? finish_done : block_done;
 }
 
 /* ===========================================================================
- * Compress as much as possible from the input stream, return true if
- * processing was terminated prematurely (no more input or output space).
+ * Compress as much as possible from the input stream, return the current
+ * block state.
  * This function does not perform lazy evaluation of matches and inserts
  * new strings in the dictionary only for unmatched strings or for short
  * matches. It is used only for the fast compression options.
  */
-local int deflate_fast(s, flush)
+local block_state deflate_fast(s, flush)
     deflate_state *s;
     int flush;
 {
@@ -984,8 +1151,9 @@ local int deflate_fast(s, flush)
          */
         if (s->lookahead < MIN_LOOKAHEAD) {
             fill_window(s);
-            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) return 1;
-
+            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
+	        return need_more;
+	    }
             if (s->lookahead == 0) break; /* flush the current block */
         }
 
@@ -1012,14 +1180,15 @@ local int deflate_fast(s, flush)
         if (s->match_length >= MIN_MATCH) {
             check_match(s, s->strstart, s->match_start, s->match_length);
 
-            bflush = _tr_tally(s, s->strstart - s->match_start,
-                               s->match_length - MIN_MATCH);
+            _tr_tally_dist(s, s->strstart - s->match_start,
+                           s->match_length - MIN_MATCH, bflush);
 
             s->lookahead -= s->match_length;
 
             /* Insert new strings in the hash table only if the match length
              * is not too large. This saves time but degrades compression.
              */
+#ifndef FASTEST
             if (s->match_length <= s->max_insert_length &&
                 s->lookahead >= MIN_MATCH) {
                 s->match_length--; /* string at strstart already in hash table */
@@ -1031,7 +1200,9 @@ local int deflate_fast(s, flush)
                      */
                 } while (--s->match_length != 0);
                 s->strstart++; 
-            } else {
+            } else
+#endif
+	    {
                 s->strstart += s->match_length;
                 s->match_length = 0;
                 s->ins_h = s->window[s->strstart];
@@ -1046,14 +1217,14 @@ local int deflate_fast(s, flush)
         } else {
             /* No match, output a literal byte */
             Tracevv((stderr,"%c", s->window[s->strstart]));
-            bflush = _tr_tally (s, 0, s->window[s->strstart]);
+            _tr_tally_lit (s, s->window[s->strstart], bflush);
             s->lookahead--;
             s->strstart++; 
         }
         if (bflush) FLUSH_BLOCK(s, 0);
     }
     FLUSH_BLOCK(s, flush == Z_FINISH);
-    return 0; /* normal exit */
+    return flush == Z_FINISH ? finish_done : block_done;
 }
 
 /* ===========================================================================
@@ -1061,7 +1232,7 @@ local int deflate_fast(s, flush)
  * evaluation for matches: a match is finally adopted only if there is
  * no better match at the next window position.
  */
-local int deflate_slow(s, flush)
+local block_state deflate_slow(s, flush)
     deflate_state *s;
     int flush;
 {
@@ -1077,8 +1248,9 @@ local int deflate_slow(s, flush)
          */
         if (s->lookahead < MIN_LOOKAHEAD) {
             fill_window(s);
-            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) return 1;
-
+            if (s->lookahead < MIN_LOOKAHEAD && flush == Z_NO_FLUSH) {
+	        return need_more;
+	    }
             if (s->lookahead == 0) break; /* flush the current block */
         }
 
@@ -1124,8 +1296,8 @@ local int deflate_slow(s, flush)
 
             check_match(s, s->strstart-1, s->prev_match, s->prev_length);
 
-            bflush = _tr_tally(s, s->strstart -1 - s->prev_match,
-                               s->prev_length - MIN_MATCH);
+            _tr_tally_dist(s, s->strstart -1 - s->prev_match,
+			   s->prev_length - MIN_MATCH, bflush);
 
             /* Insert in hash table all strings up to the end of the match.
              * strstart-1 and strstart are already inserted. If there is not
@@ -1151,12 +1323,13 @@ local int deflate_slow(s, flush)
              * is longer, truncate the previous match to a single literal.
              */
             Tracevv((stderr,"%c", s->window[s->strstart-1]));
-            if (_tr_tally (s, 0, s->window[s->strstart-1])) {
+	    _tr_tally_lit(s, s->window[s->strstart-1], bflush);
+	    if (bflush) {
                 FLUSH_BLOCK_ONLY(s, 0);
             }
             s->strstart++;
             s->lookahead--;
-            if (s->strm->avail_out == 0) return 1;
+            if (s->strm->avail_out == 0) return need_more;
         } else {
             /* There is no previous match to compare with, wait for
              * the next step to decide.
@@ -1169,10 +1342,9 @@ local int deflate_slow(s, flush)
     Assert (flush != Z_NO_FLUSH, "no flush?");
     if (s->match_available) {
         Tracevv((stderr,"%c", s->window[s->strstart-1]));
-        _tr_tally (s, 0, s->window[s->strstart-1]);
+        _tr_tally_lit(s, s->window[s->strstart-1], bflush);
         s->match_available = 0;
     }
     FLUSH_BLOCK(s, flush == Z_FINISH);
-    return 0;
+    return flush == Z_FINISH ? finish_done : block_done;
 }
-

deflate.h

@@ -1,5 +1,5 @@
 /* deflate.h -- internal compression state
- * Copyright (C) 1995-1996 Jean-loup Gailly
+ * Copyright (C) 1995-2002 Jean-loup Gailly
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -8,7 +8,7 @@
    subject to change. Applications should only use zlib.h.
  */
 
-/* $Id: deflate.h,v 1.5 1995/05/03 17:27:09 jloup Exp $ */
+/* @(#) $Id$ */
 
 #ifndef _DEFLATE_H
 #define _DEFLATE_H
@@ -80,9 +80,10 @@ typedef unsigned IPos;
  */
 
 typedef struct internal_state {
-    z_stream *strm;      /* pointer back to this zlib stream */
+    z_streamp strm;      /* pointer back to this zlib stream */
     int   status;        /* as the name implies */
     Bytef *pending_buf;  /* output still pending */
+    ulg   pending_buf_size; /* size of pending_buf */
     Bytef *pending_out;  /* next pending byte to output to the stream */
     int   pending;       /* nb of bytes in the pending buffer */
     int   noheader;      /* suppress zlib header and adler32 */
@@ -229,12 +230,12 @@ typedef struct internal_state {
 
     ulg opt_len;        /* bit length of current block with optimal trees */
     ulg static_len;     /* bit length of current block with static trees */
-    ulg compressed_len; /* total bit length of compressed file */
     uInt matches;       /* number of string matches in current block */
     int last_eob_len;   /* bit length of EOB code for last block */
 
 #ifdef DEBUG
-    ulg bits_sent;      /* bit length of the compressed data */
+    ulg compressed_len; /* total bit length of compressed file mod 2^32 */
+    ulg bits_sent;      /* bit length of compressed data sent mod 2^32 */
 #endif
 
     ush bi_buf;
@@ -267,9 +268,51 @@ typedef struct internal_state {
         /* in trees.c */
 void _tr_init         OF((deflate_state *s));
 int  _tr_tally        OF((deflate_state *s, unsigned dist, unsigned lc));
-ulg  _tr_flush_block  OF((deflate_state *s, charf *buf, ulg stored_len,
+void _tr_flush_block  OF((deflate_state *s, charf *buf, ulg stored_len,
 			  int eof));
 void _tr_align        OF((deflate_state *s));
 void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
                           int eof));
+
+#define d_code(dist) \
+   ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
+/* Mapping from a distance to a distance code. dist is the distance - 1 and
+ * must not have side effects. _dist_code[256] and _dist_code[257] are never
+ * used.
+ */
+
+#ifndef DEBUG
+/* Inline versions of _tr_tally for speed: */
+
+#if defined(GEN_TREES_H) || !defined(STDC)
+  extern uch _length_code[];
+  extern uch _dist_code[];
+#else
+  extern const uch _length_code[];
+  extern const uch _dist_code[];
+#endif
+
+# define _tr_tally_lit(s, c, flush) \
+  { uch cc = (c); \
+    s->d_buf[s->last_lit] = 0; \
+    s->l_buf[s->last_lit++] = cc; \
+    s->dyn_ltree[cc].Freq++; \
+    flush = (s->last_lit == s->lit_bufsize-1); \
+   }
+# define _tr_tally_dist(s, distance, length, flush) \
+  { uch len = (length); \
+    ush dist = (distance); \
+    s->d_buf[s->last_lit] = dist; \
+    s->l_buf[s->last_lit++] = len; \
+    dist--; \
+    s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \
+    s->dyn_dtree[d_code(dist)].Freq++; \
+    flush = (s->last_lit == s->lit_bufsize-1); \
+  }
+#else
+# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c)
+# define _tr_tally_dist(s, distance, length, flush) \
+              flush = _tr_tally(s, distance, length) 
+#endif
+
 #endif

example.c

@@ -1,9 +1,9 @@
 /* example.c -- usage example of the zlib compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
-/* $Id: example.c,v 1.9 1995/05/03 17:27:09 jloup Exp $ */
+/* @(#) $Id$ */
 
 #include <stdio.h>
 #include "zlib.h"
@@ -15,6 +15,12 @@
    extern void exit  OF((int));
 #endif
 
+#if defined(VMS) || defined(RISCOS)
+#  define TESTFILE "foo-gz"
+#else
+#  define TESTFILE "foo.gz"
+#endif
+
 #define CHECK_ERR(err, msg) { \
     if (err != Z_OK) { \
         fprintf(stderr, "%s error: %d\n", msg, err); \
@@ -30,30 +36,30 @@ const char hello[] = "hello, hello!";
 const char dictionary[] = "hello";
 uLong dictId; /* Adler32 value of the dictionary */
 
-void test_compress      OF((Bytef *compr, uLong comprLen,
-		            Bytef *uncompr, uLong uncomprLen));
+void test_compress      OF((Byte *compr, uLong comprLen,
+		            Byte *uncompr, uLong uncomprLen));
 void test_gzio          OF((const char *out, const char *in, 
-		            Bytef *uncompr, int uncomprLen));
-void test_deflate       OF((Bytef *compr, uLong comprLen));
-void test_inflate       OF((Bytef *compr, uLong comprLen,
-		            Bytef *uncompr, uLong uncomprLen));
-void test_large_deflate OF((Bytef *compr, uLong comprLen,
-		            Bytef *uncompr, uLong uncomprLen));
-void test_large_inflate OF((Bytef *compr, uLong comprLen,
-		            Bytef *uncompr, uLong uncomprLen));
-void test_flush         OF((Bytef *compr, uLong comprLen));
-void test_sync          OF((Bytef *compr, uLong comprLen,
-		            Bytef *uncompr, uLong uncomprLen));
-void test_dict_deflate  OF((Bytef *compr, uLong comprLen));
-void test_dict_inflate  OF((Bytef *compr, uLong comprLen,
-		            Bytef *uncompr, uLong uncomprLen));
+		            Byte *uncompr, int uncomprLen));
+void test_deflate       OF((Byte *compr, uLong comprLen));
+void test_inflate       OF((Byte *compr, uLong comprLen,
+		            Byte *uncompr, uLong uncomprLen));
+void test_large_deflate OF((Byte *compr, uLong comprLen,
+		            Byte *uncompr, uLong uncomprLen));
+void test_large_inflate OF((Byte *compr, uLong comprLen,
+		            Byte *uncompr, uLong uncomprLen));
+void test_flush         OF((Byte *compr, uLong *comprLen));
+void test_sync          OF((Byte *compr, uLong comprLen,
+		            Byte *uncompr, uLong uncomprLen));
+void test_dict_deflate  OF((Byte *compr, uLong comprLen));
+void test_dict_inflate  OF((Byte *compr, uLong comprLen,
+		            Byte *uncompr, uLong uncomprLen));
 int  main               OF((int argc, char *argv[]));
 
 /* ===========================================================================
  * Test compress() and uncompress()
  */
 void test_compress(compr, comprLen, uncompr, uncomprLen)
-    Bytef *compr, *uncompr;
+    Byte *compr, *uncompr;
     uLong comprLen, uncomprLen;
 {
     int err;
@@ -69,8 +75,9 @@ void test_compress(compr, comprLen, uncompr, uncomprLen)
 
     if (strcmp((char*)uncompr, hello)) {
         fprintf(stderr, "bad uncompress\n");
+	exit(1);
     } else {
-        printf("uncompress(): %s\n", uncompr);
+        printf("uncompress(): %s\n", (char *)uncompr);
     }
 }
 
@@ -78,24 +85,31 @@ void test_compress(compr, comprLen, uncompr, uncomprLen)
  * Test read/write of .gz files
  */
 void test_gzio(out, in, uncompr, uncomprLen)
-    const char *out; /* output file */
-    const char *in;  /* input file */
-    Bytef *uncompr;
+    const char *out; /* compressed output file */
+    const char *in;  /* compressed input file */
+    Byte *uncompr;
     int  uncomprLen;
 {
     int err;
     int len = strlen(hello)+1;
     gzFile file;
+    z_off_t pos;
 
     file = gzopen(out, "wb");
     if (file == NULL) {
         fprintf(stderr, "gzopen error\n");
         exit(1);
     }
-
-    if (gzwrite(file, (const voidp)hello, (unsigned)len) != len) {
-        fprintf(stderr, "gzwrite err: %s\n", gzerror(file, &err));
+    gzputc(file, 'h');
+    if (gzputs(file, "ello") != 4) {
+        fprintf(stderr, "gzputs err: %s\n", gzerror(file, &err));
+	exit(1);
     }
+    if (gzprintf(file, ", %s!", "hello") != 8) {
+        fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err));
+	exit(1);
+    }
+    gzseek(file, 1L, SEEK_CUR); /* add one zero byte */
     gzclose(file);
 
     file = gzopen(in, "rb");
@@ -107,21 +121,48 @@ void test_gzio(out, in, uncompr, uncomprLen)
     uncomprLen = gzread(file, uncompr, (unsigned)uncomprLen);
     if (uncomprLen != len) {
         fprintf(stderr, "gzread err: %s\n", gzerror(file, &err));
+	exit(1);
     }
-    gzclose(file);
-
     if (strcmp((char*)uncompr, hello)) {
-        fprintf(stderr, "bad gzread\n");
+        fprintf(stderr, "bad gzread: %s\n", (char*)uncompr);
+	exit(1);
     } else {
-        printf("gzread(): %s\n", uncompr);
+        printf("gzread(): %s\n", (char *)uncompr);
     }
+
+    pos = gzseek(file, -8L, SEEK_CUR);
+    if (pos != 6 || gztell(file) != pos) {
+	fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n",
+		(long)pos, (long)gztell(file));
+	exit(1);
+    }
+
+    if (gzgetc(file) != ' ') {
+	fprintf(stderr, "gzgetc error\n");
+	exit(1);
+    }
+
+    gzgets(file, (char*)uncompr, uncomprLen);
+    uncomprLen = strlen((char*)uncompr);
+    if (uncomprLen != 6) { /* "hello!" */
+        fprintf(stderr, "gzgets err after gzseek: %s\n", gzerror(file, &err));
+	exit(1);
+    }
+    if (strcmp((char*)uncompr, hello+7)) {
+        fprintf(stderr, "bad gzgets after gzseek\n");
+	exit(1);
+    } else {
+        printf("gzgets() after gzseek: %s\n", (char *)uncompr);
+    }
+
+    gzclose(file);
 }
 
 /* ===========================================================================
  * Test deflate() with small buffers
  */
 void test_deflate(compr, comprLen)
-    Bytef *compr;
+    Byte *compr;
     uLong comprLen;
 {
     z_stream c_stream; /* compression stream */
@@ -159,7 +200,7 @@ void test_deflate(compr, comprLen)
  * Test inflate() with small buffers
  */
 void test_inflate(compr, comprLen, uncompr, uncomprLen)
-    Bytef *compr, *uncompr;
+    Byte *compr, *uncompr;
     uLong comprLen, uncomprLen;
 {
     int err;
@@ -171,12 +212,13 @@ void test_inflate(compr, comprLen, uncompr, uncomprLen)
     d_stream.zfree = (free_func)0;
     d_stream.opaque = (voidpf)0;
 
+    d_stream.next_in  = compr;
+    d_stream.avail_in = 0;
+    d_stream.next_out = uncompr;
+
     err = inflateInit(&d_stream);
     CHECK_ERR(err, "inflateInit");
 
-    d_stream.next_in  = compr;
-    d_stream.next_out = uncompr;
-
     while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) {
         d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */
         err = inflate(&d_stream, Z_NO_FLUSH);
@@ -189,8 +231,9 @@ void test_inflate(compr, comprLen, uncompr, uncomprLen)
 
     if (strcmp((char*)uncompr, hello)) {
         fprintf(stderr, "bad inflate\n");
+	exit(1);
     } else {
-        printf("inflate(): %s\n", uncompr);
+        printf("inflate(): %s\n", (char *)uncompr);
     }
 }
 
@@ -198,7 +241,7 @@ void test_inflate(compr, comprLen, uncompr, uncomprLen)
  * Test deflate() with large buffers and dynamic change of compression level
  */
 void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
-    Bytef *compr, *uncompr;
+    Byte *compr, *uncompr;
     uLong comprLen, uncomprLen;
 {
     z_stream c_stream; /* compression stream */
@@ -223,6 +266,7 @@ void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
     CHECK_ERR(err, "deflate");
     if (c_stream.avail_in != 0) {
         fprintf(stderr, "deflate not greedy\n");
+	exit(1);
     }
 
     /* Feed in already compressed data and switch to no compression: */
@@ -242,6 +286,7 @@ void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
     err = deflate(&c_stream, Z_FINISH);
     if (err != Z_STREAM_END) {
         fprintf(stderr, "deflate should report Z_STREAM_END\n");
+	exit(1);
     }
     err = deflateEnd(&c_stream);
     CHECK_ERR(err, "deflateEnd");
@@ -251,7 +296,7 @@ void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
  * Test inflate() with large buffers
  */
 void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
-    Bytef *compr, *uncompr;
+    Byte *compr, *uncompr;
     uLong comprLen, uncomprLen;
 {
     int err;
@@ -263,12 +308,12 @@ void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
     d_stream.zfree = (free_func)0;
     d_stream.opaque = (voidpf)0;
 
-    err = inflateInit(&d_stream);
-    CHECK_ERR(err, "inflateInit");
-
     d_stream.next_in  = compr;
     d_stream.avail_in = (uInt)comprLen;
 
+    err = inflateInit(&d_stream);
+    CHECK_ERR(err, "inflateInit");
+
     for (;;) {
         d_stream.next_out = uncompr;            /* discard the output */
 	d_stream.avail_out = (uInt)uncomprLen;
@@ -282,6 +327,7 @@ void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
 
     if (d_stream.total_out != 2*uncomprLen + comprLen/2) {
         fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out);
+	exit(1);
     } else {
         printf("large_inflate(): OK\n");
     }
@@ -291,8 +337,8 @@ void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
  * Test deflate() with full flush
  */
 void test_flush(compr, comprLen)
-    Bytef *compr;
-    uLong comprLen;
+    Byte *compr;
+    uLong *comprLen;
 {
     z_stream c_stream; /* compression stream */
     int err;
@@ -308,7 +354,7 @@ void test_flush(compr, comprLen)
     c_stream.next_in  = (Bytef*)hello;
     c_stream.next_out = compr;
     c_stream.avail_in = 3;
-    c_stream.avail_out = (uInt)comprLen;
+    c_stream.avail_out = (uInt)*comprLen;
     err = deflate(&c_stream, Z_FULL_FLUSH);
     CHECK_ERR(err, "deflate");
 
@@ -321,13 +367,15 @@ void test_flush(compr, comprLen)
     }
     err = deflateEnd(&c_stream);
     CHECK_ERR(err, "deflateEnd");
+
+    *comprLen = c_stream.total_out;
 }
 
 /* ===========================================================================
  * Test inflateSync()
  */
 void test_sync(compr, comprLen, uncompr, uncomprLen)
-    Bytef *compr, *uncompr;
+    Byte *compr, *uncompr;
     uLong comprLen, uncomprLen;
 {
     int err;
@@ -339,12 +387,13 @@ void test_sync(compr, comprLen, uncompr, uncomprLen)
     d_stream.zfree = (free_func)0;
     d_stream.opaque = (voidpf)0;
 
+    d_stream.next_in  = compr;
+    d_stream.avail_in = 2; /* just read the zlib header */
+
     err = inflateInit(&d_stream);
     CHECK_ERR(err, "inflateInit");
 
-    d_stream.next_in  = compr;
     d_stream.next_out = uncompr;
-    d_stream.avail_in = 2; /* just read the zlib header */
     d_stream.avail_out = (uInt)uncomprLen;
 
     inflate(&d_stream, Z_NO_FLUSH);
@@ -358,18 +407,19 @@ void test_sync(compr, comprLen, uncompr, uncomprLen)
     if (err != Z_DATA_ERROR) {
         fprintf(stderr, "inflate should report DATA_ERROR\n");
         /* Because of incorrect adler32 */
+	exit(1);
     }
     err = inflateEnd(&d_stream);
     CHECK_ERR(err, "inflateEnd");
 
-    printf("after inflateSync(): hel%s\n", uncompr);
+    printf("after inflateSync(): hel%s\n", (char *)uncompr);
 }
 
 /* ===========================================================================
  * Test deflate() with preset dictionary
  */
 void test_dict_deflate(compr, comprLen)
-    Bytef *compr;
+    Byte *compr;
     uLong comprLen;
 {
     z_stream c_stream; /* compression stream */
@@ -396,6 +446,7 @@ void test_dict_deflate(compr, comprLen)
     err = deflate(&c_stream, Z_FINISH);
     if (err != Z_STREAM_END) {
         fprintf(stderr, "deflate should report Z_STREAM_END\n");
+	exit(1);
     }
     err = deflateEnd(&c_stream);
     CHECK_ERR(err, "deflateEnd");
@@ -405,7 +456,7 @@ void test_dict_deflate(compr, comprLen)
  * Test inflate() with a preset dictionary
  */
 void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
-    Bytef *compr, *uncompr;
+    Byte *compr, *uncompr;
     uLong comprLen, uncomprLen;
 {
     int err;
@@ -417,12 +468,12 @@ void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
     d_stream.zfree = (free_func)0;
     d_stream.opaque = (voidpf)0;
 
-    err = inflateInit(&d_stream);
-    CHECK_ERR(err, "inflateInit");
-
     d_stream.next_in  = compr;
     d_stream.avail_in = (uInt)comprLen;
 
+    err = inflateInit(&d_stream);
+    CHECK_ERR(err, "inflateInit");
+
     d_stream.next_out = uncompr;
     d_stream.avail_out = (uInt)uncomprLen;
 
@@ -445,8 +496,9 @@ void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
 
     if (strcmp((char*)uncompr, hello)) {
         fprintf(stderr, "bad inflate with dict\n");
+	exit(1);
     } else {
-        printf("inflate with dictionary: %s\n", uncompr);
+        printf("inflate with dictionary: %s\n", (char *)uncompr);
     }
 }
 
@@ -458,29 +510,32 @@ int main(argc, argv)
     int argc;
     char *argv[];
 {
-    Bytef *compr, *uncompr;
-    uLong comprLen = 32750*sizeof(int); /* don't overflow on MSDOS */
+    Byte *compr, *uncompr;
+    uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */
     uLong uncomprLen = comprLen;
+    static const char* myVersion = ZLIB_VERSION;
 
-    if (zlib_version[0] != ZLIB_VERSION[0]) {
+    if (zlibVersion()[0] != myVersion[0]) {
         fprintf(stderr, "incompatible zlib version\n");
         exit(1);
 
-    } else if (strcmp(zlib_version, ZLIB_VERSION) != 0) {
+    } else if (strcmp(zlibVersion(), ZLIB_VERSION) != 0) {
         fprintf(stderr, "warning: different zlib version\n");
     }
 
-    compr    = (Bytef*)malloc((uInt)comprLen);
-    uncompr  = (Bytef*)calloc((uInt)uncomprLen, 1); /* must be cleared */
+    compr    = (Byte*)calloc((uInt)comprLen, 1);
+    uncompr  = (Byte*)calloc((uInt)uncomprLen, 1);
+    /* compr and uncompr are cleared to avoid reading uninitialized
+     * data and to ensure that uncompr compresses well.
+     */
     if (compr == Z_NULL || uncompr == Z_NULL) {
         printf("out of memory\n");
 	exit(1);
     }
-
     test_compress(compr, comprLen, uncompr, uncomprLen);
 
-    test_gzio((argc > 1 ? argv[1] : "foo.gz"),
-              (argc > 2 ? argv[2] : "foo.gz"),
+    test_gzio((argc > 1 ? argv[1] : TESTFILE),
+              (argc > 2 ? argv[2] : TESTFILE),
 	      uncompr, (int)uncomprLen);
 
     test_deflate(compr, comprLen);
@@ -489,8 +544,9 @@ int main(argc, argv)
     test_large_deflate(compr, comprLen, uncompr, uncomprLen);
     test_large_inflate(compr, comprLen, uncompr, uncomprLen);
 
-    test_flush(compr, comprLen);
+    test_flush(compr, &comprLen);
     test_sync(compr, comprLen, uncompr, uncomprLen);
+    comprLen = uncomprLen;
 
     test_dict_deflate(compr, comprLen);
     test_dict_inflate(compr, comprLen, uncompr, uncomprLen);

gzio.c

@@ -1,9 +1,11 @@
 /* gzio.c -- IO on .gz files
- * Copyright (C) 1995-1996 Jean-loup Gailly.
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Compile this file with -DNO_DEFLATE to avoid the compression code.
  */
 
-/* $Id: gzio.c,v 1.8 1995/05/03 17:27:09 jloup Exp $ */
+/* @(#) $Id$ */
 
 #include <stdio.h>
 
@@ -11,7 +13,16 @@
 
 struct internal_state {int dummy;}; /* for buggy compilers */
 
-#define Z_BUFSIZE 4096
+#ifndef Z_BUFSIZE
+#  ifdef MAXSEG_64K
+#    define Z_BUFSIZE 4096 /* minimize memory usage for 16-bit DOS */
+#  else
+#    define Z_BUFSIZE 16384
+#  endif
+#endif
+#ifndef Z_PRINTF_BUFSIZE
+#  define Z_PRINTF_BUFSIZE 4096
+#endif
 
 #define ALLOC(size) malloc(size)
 #define TRYFREE(p) {if (p) free(p);}
@@ -38,10 +49,12 @@ typedef struct gz_stream {
     char     *path;   /* path name for debugging only */
     int      transparent; /* 1 if input file is not a .gz file */
     char     mode;    /* 'w' or 'r' */
+    long     startpos; /* start of compressed data in file (header skipped) */
 } gz_stream;
 
 
 local gzFile gz_open      OF((const char *path, const char *mode, int  fd));
+local int do_flush        OF((gzFile file, int flush));
 local int    get_byte     OF((gz_stream *s));
 local void   check_header OF((gz_stream *s));
 local int    destroy      OF((gz_stream *s));
@@ -64,6 +77,7 @@ local gzFile gz_open (path, mode, fd)
 {
     int err;
     int level = Z_DEFAULT_COMPRESSION; /* compression level */
+    int strategy = Z_DEFAULT_STRATEGY; /* compression strategy */
     char *p = (char*)mode;
     gz_stream *s;
     char fmode[80]; /* copy of mode, without the compression level */
@@ -99,6 +113,10 @@ local gzFile gz_open (path, mode, fd)
         if (*p == 'w' || *p == 'a') s->mode = 'w';
         if (*p >= '0' && *p <= '9') {
 	    level = *p - '0';
+	} else if (*p == 'f') {
+	  strategy = Z_FILTERED;
+	} else if (*p == 'h') {
+	  strategy = Z_HUFFMAN_ONLY;
 	} else {
 	    *m++ = *p; /* copy the mode */
 	}
@@ -106,19 +124,28 @@ local gzFile gz_open (path, mode, fd)
     if (s->mode == '\0') return destroy(s), (gzFile)Z_NULL;
     
     if (s->mode == 'w') {
+#ifdef NO_DEFLATE
+        err = Z_STREAM_ERROR;
+#else
         err = deflateInit2(&(s->stream), level,
-                           Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, 0);
+                           Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, strategy);
         /* windowBits is passed < 0 to suppress zlib header */
 
         s->stream.next_out = s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
-
+#endif
         if (err != Z_OK || s->outbuf == Z_NULL) {
             return destroy(s), (gzFile)Z_NULL;
         }
     } else {
-        err = inflateInit2(&(s->stream), -MAX_WBITS);
         s->stream.next_in  = s->inbuf = (Byte*)ALLOC(Z_BUFSIZE);
 
+        err = inflateInit2(&(s->stream), -MAX_WBITS);
+        /* windowBits is passed < 0 to tell that there is no zlib header.
+         * Note that in this case inflate *requires* an extra "dummy" byte
+         * after the compressed stream in order to complete decompression and
+         * return Z_STREAM_END. Here the gzip CRC32 ensures that 4 bytes are
+         * present after the compressed stream.
+         */
         if (err != Z_OK || s->inbuf == Z_NULL) {
             return destroy(s), (gzFile)Z_NULL;
         }
@@ -126,7 +153,7 @@ local gzFile gz_open (path, mode, fd)
     s->stream.avail_out = Z_BUFSIZE;
 
     errno = 0;
-    s->file = fd < 0 ? FOPEN(path, fmode) : (FILE*)fdopen(fd, fmode);
+    s->file = fd < 0 ? F_OPEN(path, fmode) : (FILE*)fdopen(fd, fmode);
 
     if (s->file == NULL) {
         return destroy(s), (gzFile)Z_NULL;
@@ -136,16 +163,24 @@ local gzFile gz_open (path, mode, fd)
          */
         fprintf(s->file, "%c%c%c%c%c%c%c%c%c%c", gz_magic[0], gz_magic[1],
              Z_DEFLATED, 0 /*flags*/, 0,0,0,0 /*time*/, 0 /*xflags*/, OS_CODE);
+	s->startpos = 10L;
+	/* We use 10L instead of ftell(s->file) to because ftell causes an
+         * fflush on some systems. This version of the library doesn't use
+         * startpos anyway in write mode, so this initialization is not
+         * necessary.
+         */
     } else {
 	check_header(s); /* skip the .gz header */
+	s->startpos = (ftell(s->file) - s->stream.avail_in);
     }
+    
     return (gzFile)s;
 }
 
 /* ===========================================================================
      Opens a gzip (.gz) file for reading or writing.
 */
-gzFile gzopen (path, mode)
+gzFile ZEXPORT gzopen (path, mode)
     const char *path;
     const char *mode;
 {
@@ -156,7 +191,7 @@ gzFile gzopen (path, mode)
      Associate a gzFile with the file descriptor fd. fd is not dup'ed here
    to mimic the behavio(u)r of fdopen.
 */
-gzFile gzdopen (fd, mode)
+gzFile ZEXPORT gzdopen (fd, mode)
     int fd;
     const char *mode;
 {
@@ -168,6 +203,31 @@ gzFile gzdopen (fd, mode)
     return gz_open (name, mode, fd);
 }
 
+/* ===========================================================================
+ * Update the compression level and strategy
+ */
+int ZEXPORT gzsetparams (file, level, strategy)
+    gzFile file;
+    int level;
+    int strategy;
+{
+    gz_stream *s = (gz_stream*)file;
+
+    if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
+
+    /* Make room to allow flushing */
+    if (s->stream.avail_out == 0) {
+
+	s->stream.next_out = s->outbuf;
+	if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {
+	    s->z_err = Z_ERRNO;
+	}
+	s->stream.avail_out = Z_BUFSIZE;
+    }
+
+    return deflateParams (&(s->stream), level, strategy);
+}
+
 /* ===========================================================================
      Read a byte from a gz_stream; update next_in and avail_in. Return EOF
    for end of file.
@@ -203,8 +263,8 @@ local int get_byte(s)
 local void check_header(s)
     gz_stream *s;
 {
-    int method = 0;
-    int flags = 0;
+    int method; /* method byte */
+    int flags;  /* flags byte */
     uInt len;
     int c;
 
@@ -212,8 +272,11 @@ local void check_header(s)
     for (len = 0; len < 2; len++) {
 	c = get_byte(s);
 	if (c != gz_magic[len]) {
-	    s->transparent = 1;
-	    if (c != EOF) s->stream.avail_in++, s->stream.next_in--;
+	    if (len != 0) s->stream.avail_in++, s->stream.next_in--;
+	    if (c != EOF) {
+		s->stream.avail_in++, s->stream.next_in--;
+		s->transparent = 1;
+	    }
 	    s->z_err = s->stream.avail_in != 0 ? Z_OK : Z_STREAM_END;
 	    return;
 	}
@@ -260,14 +323,21 @@ local int destroy (s)
     TRYFREE(s->msg);
 
     if (s->stream.state != NULL) {
-       if (s->mode == 'w') {
-           err = deflateEnd(&(s->stream));
-       } else if (s->mode == 'r') {
-           err = inflateEnd(&(s->stream));
-       }
+	if (s->mode == 'w') {
+#ifdef NO_DEFLATE
+	    err = Z_STREAM_ERROR;
+#else
+	    err = deflateEnd(&(s->stream));
+#endif
+	} else if (s->mode == 'r') {
+	    err = inflateEnd(&(s->stream));
+	}
     }
     if (s->file != NULL && fclose(s->file)) {
-        err = Z_ERRNO;
+#ifdef ESPIPE
+	if (errno != ESPIPE) /* fclose is broken for pipes in HP/UX */
+#endif
+	    err = Z_ERRNO;
     }
     if (s->z_err < 0) err = s->z_err;
 
@@ -282,20 +352,22 @@ local int destroy (s)
      Reads the given number of uncompressed bytes from the compressed file.
    gzread returns the number of bytes actually read (0 for end of file).
 */
-int gzread (file, buf, len)
+int ZEXPORT gzread (file, buf, len)
     gzFile file;
     voidp buf;
     unsigned len;
 {
     gz_stream *s = (gz_stream*)file;
-    Byte *start = buf; /* starting point for crc computation */
+    Bytef *start = (Bytef*)buf; /* starting point for crc computation */
+    Byte  *next_out; /* == stream.next_out but not forced far (for MSDOS) */
 
     if (s == NULL || s->mode != 'r') return Z_STREAM_ERROR;
 
     if (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO) return -1;
     if (s->z_err == Z_STREAM_END) return 0;  /* EOF */
 
-    s->stream.next_out = buf;
+    next_out = (Byte*)buf;
+    s->stream.next_out = (Bytef*)buf;
     s->stream.avail_out = len;
 
     while (s->stream.avail_out != 0) {
@@ -306,16 +378,21 @@ int gzread (file, buf, len)
 	    if (n > s->stream.avail_out) n = s->stream.avail_out;
 	    if (n > 0) {
 		zmemcpy(s->stream.next_out, s->stream.next_in, n);
-		s->stream.next_out  += n;
+		next_out += n;
+		s->stream.next_out = next_out;
 		s->stream.next_in   += n;
 		s->stream.avail_out -= n;
 		s->stream.avail_in  -= n;
 	    }
 	    if (s->stream.avail_out > 0) {
-		s->stream.avail_out -= fread(s->stream.next_out,
-					     1, s->stream.avail_out, s->file);
+		s->stream.avail_out -= fread(next_out, 1, s->stream.avail_out,
+					     s->file);
 	    }
-	    return (int)(len - s->stream.avail_out);
+	    len -= s->stream.avail_out;
+	    s->stream.total_in  += (uLong)len;
+	    s->stream.total_out += (uLong)len;
+            if (len == 0) s->z_eof = 1;
+	    return (int)len;
 	}
         if (s->stream.avail_in == 0 && !s->z_eof) {
 
@@ -337,13 +414,22 @@ int gzread (file, buf, len)
 	    s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
 	    start = s->stream.next_out;
 
-	    if (getLong(s) != s->crc || getLong(s) != s->stream.total_out) {
+	    if (getLong(s) != s->crc) {
 		s->z_err = Z_DATA_ERROR;
 	    } else {
-		/* Check for concatenated .gz files: */
+	        (void)getLong(s);
+                /* The uncompressed length returned by above getlong() may
+                 * be different from s->stream.total_out) in case of
+		 * concatenated .gz files. Check for such files:
+		 */
 		check_header(s);
 		if (s->z_err == Z_OK) {
+		    uLong total_in = s->stream.total_in;
+		    uLong total_out = s->stream.total_out;
+
 		    inflateReset(&(s->stream));
+		    s->stream.total_in = total_in;
+		    s->stream.total_out = total_out;
 		    s->crc = crc32(0L, Z_NULL, 0);
 		}
 	    }
@@ -355,11 +441,49 @@ int gzread (file, buf, len)
     return (int)(len - s->stream.avail_out);
 }
 
+
+/* ===========================================================================
+      Reads one byte from the compressed file. gzgetc returns this byte
+   or -1 in case of end of file or error.
+*/
+int ZEXPORT gzgetc(file)
+    gzFile file;
+{
+    unsigned char c;
+
+    return gzread(file, &c, 1) == 1 ? c : -1;
+}
+
+
+/* ===========================================================================
+      Reads bytes from the compressed file until len-1 characters are
+   read, or a newline character is read and transferred to buf, or an
+   end-of-file condition is encountered.  The string is then terminated
+   with a null character.
+      gzgets returns buf, or Z_NULL in case of error.
+
+      The current implementation is not optimized at all.
+*/
+char * ZEXPORT gzgets(file, buf, len)
+    gzFile file;
+    char *buf;
+    int len;
+{
+    char *b = buf;
+    if (buf == Z_NULL || len <= 0) return Z_NULL;
+
+    while (--len > 0 && gzread(file, buf, 1) == 1 && *buf++ != '\n') ;
+    *buf = '\0';
+    return b == buf && len > 0 ? Z_NULL : b;
+}
+
+
+#ifndef NO_DEFLATE
 /* ===========================================================================
      Writes the given number of uncompressed bytes into the compressed file.
    gzwrite returns the number of bytes actually written (0 in case of error).
 */
-int gzwrite (file, buf, len)
+int ZEXPORT gzwrite (file, buf, len)
     gzFile file;
     const voidp buf;
     unsigned len;
@@ -368,7 +492,7 @@ int gzwrite (file, buf, len)
 
     if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
 
-    s->stream.next_in = buf;
+    s->stream.next_in = (Bytef*)buf;
     s->stream.avail_in = len;
 
     while (s->stream.avail_in != 0) {
@@ -385,18 +509,95 @@ int gzwrite (file, buf, len)
         s->z_err = deflate(&(s->stream), Z_NO_FLUSH);
         if (s->z_err != Z_OK) break;
     }
-    s->crc = crc32(s->crc, buf, len);
+    s->crc = crc32(s->crc, (const Bytef *)buf, len);
 
     return (int)(len - s->stream.avail_in);
 }
 
+/* ===========================================================================
+     Converts, formats, and writes the args to the compressed file under
+   control of the format string, as in fprintf. gzprintf returns the number of
+   uncompressed bytes actually written (0 in case of error).
+*/
+#ifdef STDC
+#include <stdarg.h>
+
+int ZEXPORTVA gzprintf (gzFile file, const char *format, /* args */ ...)
+{
+    char buf[Z_PRINTF_BUFSIZE];
+    va_list va;
+    int len;
+
+    va_start(va, format);
+#ifdef HAS_vsnprintf
+    (void)vsnprintf(buf, sizeof(buf), format, va);
+#else
+    (void)vsprintf(buf, format, va);
+#endif
+    va_end(va);
+    len = strlen(buf); /* some *sprintf don't return the nb of bytes written */
+    if (len <= 0) return 0;
+
+    return gzwrite(file, buf, (unsigned)len);
+}
+#else /* not ANSI C */
+
+int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
+	               a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
+    gzFile file;
+    const char *format;
+    int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
+	a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
+{
+    char buf[Z_PRINTF_BUFSIZE];
+    int len;
+
+#ifdef HAS_snprintf
+    snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8,
+	     a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+#else
+    sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8,
+	    a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+#endif
+    len = strlen(buf); /* old sprintf doesn't return the nb of bytes written */
+    if (len <= 0) return 0;
+
+    return gzwrite(file, buf, len);
+}
+#endif
+
+/* ===========================================================================
+      Writes c, converted to an unsigned char, into the compressed file.
+   gzputc returns the value that was written, or -1 in case of error.
+*/
+int ZEXPORT gzputc(file, c)
+    gzFile file;
+    int c;
+{
+    unsigned char cc = (unsigned char) c; /* required for big endian systems */
+
+    return gzwrite(file, &cc, 1) == 1 ? (int)cc : -1;
+}
+
+
+/* ===========================================================================
+      Writes the given null-terminated string to the compressed file, excluding
+   the terminating null character.
+      gzputs returns the number of characters written, or -1 in case of error.
+*/
+int ZEXPORT gzputs(file, s)
+    gzFile file;
+    const char *s;
+{
+    return gzwrite(file, (char*)s, (unsigned)strlen(s));
+}
+
+
 /* ===========================================================================
      Flushes all pending output into the compressed file. The parameter
    flush is as in the deflate() function.
-     gzflush should be called only when strictly necessary because it can
-   degrade compression.
 */
-int gzflush (file, flush)
+local int do_flush (file, flush)
     gzFile file;
     int flush;
 {
@@ -422,6 +623,9 @@ int gzflush (file, flush)
         if (done) break;
         s->z_err = deflate(&(s->stream), flush);
 
+	/* Ignore the second of two consecutive flushes: */
+	if (len == 0 && s->z_err == Z_BUF_ERROR) s->z_err = Z_OK;
+
         /* deflate has finished flushing only when it hasn't used up
          * all the available space in the output buffer: 
          */
@@ -429,9 +633,155 @@ int gzflush (file, flush)
  
         if (s->z_err != Z_OK && s->z_err != Z_STREAM_END) break;
     }
+    return  s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
+}
+
+int ZEXPORT gzflush (file, flush)
+     gzFile file;
+     int flush;
+{
+    gz_stream *s = (gz_stream*)file;
+    int err = do_flush (file, flush);
+
+    if (err) return err;
     fflush(s->file);
     return  s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
 }
+#endif /* NO_DEFLATE */
+
+/* ===========================================================================
+      Sets the starting position for the next gzread or gzwrite on the given
+   compressed file. The offset represents a number of bytes in the
+      gzseek returns the resulting offset location as measured in bytes from
+   the beginning of the uncompressed stream, or -1 in case of error.
+      SEEK_END is not implemented, returns error.
+      In this version of the library, gzseek can be extremely slow.
+*/
+z_off_t ZEXPORT gzseek (file, offset, whence)
+    gzFile file;
+    z_off_t offset;
+    int whence;
+{
+    gz_stream *s = (gz_stream*)file;
+
+    if (s == NULL || whence == SEEK_END ||
+	s->z_err == Z_ERRNO || s->z_err == Z_DATA_ERROR) {
+	return -1L;
+    }
+    
+    if (s->mode == 'w') {
+#ifdef NO_DEFLATE
+	return -1L;
+#else
+	if (whence == SEEK_SET) {
+	    offset -= s->stream.total_in;
+	}
+	if (offset < 0) return -1L;
+
+	/* At this point, offset is the number of zero bytes to write. */
+	if (s->inbuf == Z_NULL) {
+	    s->inbuf = (Byte*)ALLOC(Z_BUFSIZE); /* for seeking */
+	    zmemzero(s->inbuf, Z_BUFSIZE);
+	}
+	while (offset > 0)  {
+	    uInt size = Z_BUFSIZE;
+	    if (offset < Z_BUFSIZE) size = (uInt)offset;
+
+	    size = gzwrite(file, s->inbuf, size);
+	    if (size == 0) return -1L;
+
+	    offset -= size;
+	}
+	return (z_off_t)s->stream.total_in;
+#endif
+    }
+    /* Rest of function is for reading only */
+
+    /* compute absolute position */
+    if (whence == SEEK_CUR) {
+	offset += s->stream.total_out;
+    }
+    if (offset < 0) return -1L;
+
+    if (s->transparent) {
+	/* map to fseek */
+	s->stream.avail_in = 0;
+	s->stream.next_in = s->inbuf;
+        if (fseek(s->file, offset, SEEK_SET) < 0) return -1L;
+
+	s->stream.total_in = s->stream.total_out = (uLong)offset;
+	return offset;
+    }
+
+    /* For a negative seek, rewind and use positive seek */
+    if ((uLong)offset >= s->stream.total_out) {
+	offset -= s->stream.total_out;
+    } else if (gzrewind(file) < 0) {
+	return -1L;
+    }
+    /* offset is now the number of bytes to skip. */
+
+    if (offset != 0 && s->outbuf == Z_NULL) {
+	s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
+    }
+    while (offset > 0)  {
+	int size = Z_BUFSIZE;
+	if (offset < Z_BUFSIZE) size = (int)offset;
+
+	size = gzread(file, s->outbuf, (uInt)size);
+	if (size <= 0) return -1L;
+	offset -= size;
+    }
+    return (z_off_t)s->stream.total_out;
+}
+
+/* ===========================================================================
+     Rewinds input file. 
+*/
+int ZEXPORT gzrewind (file)
+    gzFile file;
+{
+    gz_stream *s = (gz_stream*)file;
+    
+    if (s == NULL || s->mode != 'r') return -1;
+
+    s->z_err = Z_OK;
+    s->z_eof = 0;
+    s->stream.avail_in = 0;
+    s->stream.next_in = s->inbuf;
+    s->crc = crc32(0L, Z_NULL, 0);
+	
+    if (s->startpos == 0) { /* not a compressed file */
+	rewind(s->file);
+	return 0;
+    }
+
+    (void) inflateReset(&s->stream);
+    return fseek(s->file, s->startpos, SEEK_SET);
+}
+
+/* ===========================================================================
+     Returns the starting position for the next gzread or gzwrite on the
+   given compressed file. This position represents a number of bytes in the
+   uncompressed data stream.
+*/
+z_off_t ZEXPORT gztell (file)
+    gzFile file;
+{
+    return gzseek(file, 0L, SEEK_CUR);
+}
+
+/* ===========================================================================
+     Returns 1 when EOF has previously been detected reading the given
+   input stream, otherwise zero.
+*/
+int ZEXPORT gzeof (file)
+    gzFile file;
+{
+    gz_stream *s = (gz_stream*)file;
+    
+    return (s == NULL || s->mode != 'r') ? 0 : s->z_eof;
+}
 
 /* ===========================================================================
    Outputs a long in LSB order to the given file
@@ -448,7 +798,8 @@ local void putLong (file, x)
 }
 
 /* ===========================================================================
-   Reads a long in LSB order from the given gz_stream. Sets 
+   Reads a long in LSB order from the given gz_stream. Sets z_err in case
+   of error.
 */
 local uLong getLong (s)
     gz_stream *s;
@@ -468,7 +819,7 @@ local uLong getLong (s)
      Flushes all pending output if necessary, closes the compressed file
    and deallocates all the (de)compression state.
 */
-int gzclose (file)
+int ZEXPORT gzclose (file)
     gzFile file;
 {
     int err;
@@ -477,14 +828,17 @@ int gzclose (file)
     if (s == NULL) return Z_STREAM_ERROR;
 
     if (s->mode == 'w') {
-        err = gzflush (file, Z_FINISH);
-        if (err != Z_OK) return destroy(file);
+#ifdef NO_DEFLATE
+	return Z_STREAM_ERROR;
+#else
+        err = do_flush (file, Z_FINISH);
+        if (err != Z_OK) return destroy((gz_stream*)file);
 
         putLong (s->file, s->crc);
         putLong (s->file, s->stream.total_in);
-
+#endif
     }
-    return destroy(file);
+    return destroy((gz_stream*)file);
 }
 
 /* ===========================================================================
@@ -494,7 +848,7 @@ int gzclose (file)
    errnum is set to Z_ERRNO and the application may consult errno
    to get the exact error code.
 */
-char*  gzerror (file, errnum)
+const char*  ZEXPORT gzerror (file, errnum)
     gzFile file;
     int *errnum;
 {
@@ -503,19 +857,19 @@ char*  gzerror (file, errnum)
 
     if (s == NULL) {
         *errnum = Z_STREAM_ERROR;
-        return ERR_MSG(Z_STREAM_ERROR);
+        return (const char*)ERR_MSG(Z_STREAM_ERROR);
     }
     *errnum = s->z_err;
-    if (*errnum == Z_OK) return (char*)"";
+    if (*errnum == Z_OK) return (const char*)"";
 
     m =  (char*)(*errnum == Z_ERRNO ? zstrerror(errno) : s->stream.msg);
 
-    if (m == NULL || *m == '\0') m = (char*)z_errmsg[1-s->z_err];
+    if (m == NULL || *m == '\0') m = (char*)ERR_MSG(s->z_err);
 
     TRYFREE(s->msg);
     s->msg = (char*)ALLOC(strlen(s->path) + strlen(m) + 3);
     strcpy(s->msg, s->path);
     strcat(s->msg, ": ");
     strcat(s->msg, m);
-    return s->msg;
+    return (const char*)s->msg;
 }

infblock.c

@@ -1,5 +1,5 @@
 /* infblock.c -- interpret and process block types to last block
- * Copyright (C) 1995-1996 Mark Adler
+ * Copyright (C) 1995-2002 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -11,8 +11,12 @@
 
 struct inflate_codes_state {int dummy;}; /* for buggy compilers */
 
+/* simplify the use of the inflate_huft type with some defines */
+#define exop word.what.Exop
+#define bits word.what.Bits
+
 /* Table for deflate from PKZIP's appnote.txt. */
-local uInt border[] = { /* Order of the bit length code lengths */
+local const uInt border[] = { /* Order of the bit length code lengths */
         16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
 
 /*
@@ -63,31 +67,27 @@ local uInt border[] = { /* Order of the bit length code lengths */
 
 void inflate_blocks_reset(s, z, c)
 inflate_blocks_statef *s;
-z_stream *z;
+z_streamp z;
 uLongf *c;
 {
-  if (s->checkfn != Z_NULL)
+  if (c != Z_NULL)
     *c = s->check;
   if (s->mode == BTREE || s->mode == DTREE)
     ZFREE(z, s->sub.trees.blens);
   if (s->mode == CODES)
-  {
     inflate_codes_free(s->sub.decode.codes, z);
-    inflate_trees_free(s->sub.decode.td, z);
-    inflate_trees_free(s->sub.decode.tl, z);
-  }
   s->mode = TYPE;
   s->bitk = 0;
   s->bitb = 0;
   s->read = s->write = s->window;
   if (s->checkfn != Z_NULL)
-    z->adler = s->check = (*s->checkfn)(0L, Z_NULL, 0);
-  Trace((stderr, "inflate:   blocks reset\n"));
+    z->adler = s->check = (*s->checkfn)(0L, (const Bytef *)Z_NULL, 0);
+  Tracev((stderr, "inflate:   blocks reset\n"));
 }
 
 
 inflate_blocks_statef *inflate_blocks_new(z, c, w)
-z_stream *z;
+z_streamp z;
 check_func c;
 uInt w;
 {
@@ -96,23 +96,30 @@ uInt w;
   if ((s = (inflate_blocks_statef *)ZALLOC
        (z,1,sizeof(struct inflate_blocks_state))) == Z_NULL)
     return s;
+  if ((s->hufts =
+       (inflate_huft *)ZALLOC(z, sizeof(inflate_huft), MANY)) == Z_NULL)
+  {
+    ZFREE(z, s);
+    return Z_NULL;
+  }
   if ((s->window = (Bytef *)ZALLOC(z, 1, w)) == Z_NULL)
   {
+    ZFREE(z, s->hufts);
     ZFREE(z, s);
     return Z_NULL;
   }
   s->end = s->window + w;
   s->checkfn = c;
   s->mode = TYPE;
-  Trace((stderr, "inflate:   blocks allocated\n"));
-  inflate_blocks_reset(s, z, &s->check);
+  Tracev((stderr, "inflate:   blocks allocated\n"));
+  inflate_blocks_reset(s, z, Z_NULL);
   return s;
 }
 
 
 int inflate_blocks(s, z, r)
 inflate_blocks_statef *s;
-z_stream *z;
+z_streamp z;
 int r;
 {
   uInt t;               /* temporary storage */
@@ -136,7 +143,7 @@ int r;
       switch (t >> 1)
       {
         case 0:                         /* stored */
-          Trace((stderr, "inflate:     stored block%s\n",
+          Tracev((stderr, "inflate:     stored block%s\n",
                  s->last ? " (last)" : ""));
           DUMPBITS(3)
           t = k & 7;                    /* go to byte boundary */
@@ -144,27 +151,25 @@ int r;
           s->mode = LENS;               /* get length of stored block */
           break;
         case 1:                         /* fixed */
-          Trace((stderr, "inflate:     fixed codes block%s\n",
+          Tracev((stderr, "inflate:     fixed codes block%s\n",
                  s->last ? " (last)" : ""));
           {
             uInt bl, bd;
             inflate_huft *tl, *td;
 
-            inflate_trees_fixed(&bl, &bd, &tl, &td);
+            inflate_trees_fixed(&bl, &bd, &tl, &td, z);
             s->sub.decode.codes = inflate_codes_new(bl, bd, tl, td, z);
             if (s->sub.decode.codes == Z_NULL)
             {
               r = Z_MEM_ERROR;
               LEAVE
             }
-            s->sub.decode.tl = Z_NULL;  /* don't try to free these */
-            s->sub.decode.td = Z_NULL;
           }
           DUMPBITS(3)
           s->mode = CODES;
           break;
         case 2:                         /* dynamic */
-          Trace((stderr, "inflate:     dynamic codes block%s\n",
+          Tracev((stderr, "inflate:     dynamic codes block%s\n",
                  s->last ? " (last)" : ""));
           DUMPBITS(3)
           s->mode = TABLE;
@@ -189,7 +194,7 @@ int r;
       s->sub.left = (uInt)b & 0xffff;
       b = k = 0;                      /* dump bits */
       Tracev((stderr, "inflate:       stored length %u\n", s->sub.left));
-      s->mode = s->sub.left ? STORED : TYPE;
+      s->mode = s->sub.left ? STORED : (s->last ? DRY : TYPE);
       break;
     case STORED:
       if (n == 0)
@@ -221,8 +226,6 @@ int r;
       }
 #endif
       t = 258 + (t & 0x1f) + ((t >> 5) & 0x1f);
-      if (t < 19)
-        t = 19;
       if ((s->sub.trees.blens = (uIntf*)ZALLOC(z, t, sizeof(uInt))) == Z_NULL)
       {
         r = Z_MEM_ERROR;
@@ -243,12 +246,15 @@ int r;
         s->sub.trees.blens[border[s->sub.trees.index++]] = 0;
       s->sub.trees.bb = 7;
       t = inflate_trees_bits(s->sub.trees.blens, &s->sub.trees.bb,
-                             &s->sub.trees.tb, z);
+                             &s->sub.trees.tb, s->hufts, z);
       if (t != Z_OK)
       {
         r = t;
         if (r == Z_DATA_ERROR)
+        {
+          ZFREE(z, s->sub.trees.blens);
           s->mode = BAD;
+        }
         LEAVE
       }
       s->sub.trees.index = 0;
@@ -264,8 +270,8 @@ int r;
         t = s->sub.trees.bb;
         NEEDBITS(t)
         h = s->sub.trees.tb + ((uInt)b & inflate_mask[t]);
-        t = h->word.what.Bits;
-        c = h->more.Base;
+        t = h->bits;
+        c = h->base;
         if (c < 16)
         {
           DUMPBITS(t)
@@ -284,6 +290,7 @@ int r;
           if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||
               (c == 16 && i < 1))
           {
+            ZFREE(z, s->sub.trees.blens);
             s->mode = BAD;
             z->msg = (char*)"invalid bit length repeat";
             r = Z_DATA_ERROR;
@@ -296,7 +303,6 @@ int r;
           s->sub.trees.index = i;
         }
       }
-      inflate_trees_free(s->sub.trees.tb, z);
       s->sub.trees.tb = Z_NULL;
       {
         uInt bl, bd;
@@ -307,27 +313,27 @@ int r;
         bd = 6;         /* must be <= 9 for lookahead assumptions */
         t = s->sub.trees.table;
         t = inflate_trees_dynamic(257 + (t & 0x1f), 1 + ((t >> 5) & 0x1f),
-                                  s->sub.trees.blens, &bl, &bd, &tl, &td, z);
+                                  s->sub.trees.blens, &bl, &bd, &tl, &td,
+                                  s->hufts, z);
         if (t != Z_OK)
         {
           if (t == (uInt)Z_DATA_ERROR)
+          {
+            ZFREE(z, s->sub.trees.blens);
             s->mode = BAD;
+          }
           r = t;
           LEAVE
         }
         Tracev((stderr, "inflate:       trees ok\n"));
         if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL)
         {
-          inflate_trees_free(td, z);
-          inflate_trees_free(tl, z);
           r = Z_MEM_ERROR;
           LEAVE
         }
-        ZFREE(z, s->sub.trees.blens);
         s->sub.decode.codes = c;
-        s->sub.decode.tl = tl;
-        s->sub.decode.td = td;
       }
+      ZFREE(z, s->sub.trees.blens);
       s->mode = CODES;
     case CODES:
       UPDATE
@@ -335,8 +341,6 @@ int r;
         return inflate_flush(s, z, r);
       r = Z_OK;
       inflate_codes_free(s->sub.decode.codes, z);
-      inflate_trees_free(s->sub.decode.td, z);
-      inflate_trees_free(s->sub.decode.tl, z);
       LOAD
       Tracev((stderr, "inflate:       codes end, %lu total out\n",
               z->total_out + (q >= s->read ? q - s->read :
@@ -346,13 +350,6 @@ int r;
         s->mode = TYPE;
         break;
       }
-      if (k > 7)              /* return unused byte, if any */
-      {
-        Assert(k < 16, "inflate_codes grabbed too many bytes")
-        k -= 8;
-        n++;
-        p--;                    /* can always return one */
-      }
       s->mode = DRY;
     case DRY:
       FLUSH
@@ -372,25 +369,35 @@ int r;
 }
 
 
-int inflate_blocks_free(s, z, c)
+int inflate_blocks_free(s, z)
 inflate_blocks_statef *s;
-z_stream *z;
-uLongf *c;
+z_streamp z;
 {
-  inflate_blocks_reset(s, z, c);
+  inflate_blocks_reset(s, z, Z_NULL);
   ZFREE(z, s->window);
+  ZFREE(z, s->hufts);
   ZFREE(z, s);
-  Trace((stderr, "inflate:   blocks freed\n"));
+  Tracev((stderr, "inflate:   blocks freed\n"));
   return Z_OK;
 }
 
 
-void inflate_set_dictionary(s, z, d, n)
+void inflate_set_dictionary(s, d, n)
 inflate_blocks_statef *s;
-z_stream *z;
 const Bytef *d;
 uInt  n;
 {
-  zmemcpy((charf *)s->window, d, n);
+  zmemcpy(s->window, d, n);
   s->read = s->write = s->window + n;
 }
+
+
+/* Returns true if inflate is currently at the end of a block generated
+ * by Z_SYNC_FLUSH or Z_FULL_FLUSH. 
+ * IN assertion: s != Z_NULL
+ */
+int inflate_blocks_sync_point(s)
+inflate_blocks_statef *s;
+{
+  return s->mode == LENS;
+}

infblock.h

@@ -1,5 +1,5 @@
 /* infblock.h -- header to use infblock.c
- * Copyright (C) 1995-1996 Mark Adler
+ * Copyright (C) 1995-2002 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -12,27 +12,28 @@ struct inflate_blocks_state;
 typedef struct inflate_blocks_state FAR inflate_blocks_statef;
 
 extern inflate_blocks_statef * inflate_blocks_new OF((
-    z_stream *z,
+    z_streamp z,
     check_func c,               /* check function */
     uInt w));                   /* window size */
 
 extern int inflate_blocks OF((
     inflate_blocks_statef *,
-    z_stream *,
+    z_streamp ,
     int));                      /* initial return code */
 
 extern void inflate_blocks_reset OF((
     inflate_blocks_statef *,
-    z_stream *,
+    z_streamp ,
     uLongf *));                  /* check value on output */
 
 extern int inflate_blocks_free OF((
     inflate_blocks_statef *,
-    z_stream *,
-    uLongf *));                  /* check value on output */
+    z_streamp));
 
 extern void inflate_set_dictionary OF((
     inflate_blocks_statef *s,
-    z_stream *z,
     const Bytef *d,  /* dictionary */
     uInt  n));       /* dictionary length */
+
+extern int inflate_blocks_sync_point OF((
+    inflate_blocks_statef *s));

infcodes.c

@@ -1,5 +1,5 @@
 /* infcodes.c -- process literals and length/distance pairs
- * Copyright (C) 1995-1996 Mark Adler
+ * Copyright (C) 1995-2002 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -11,16 +11,10 @@
 #include "inffast.h"
 
 /* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
 #define exop word.what.Exop
 #define bits word.what.Bits
 
-/* inflate codes private state */
-struct inflate_codes_state {
-
-  /* mode */
-  enum {        /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
+typedef enum {        /* waiting for "i:"=input, "o:"=output, "x:"=nothing */
       START,    /* x: set up for LEN */
       LEN,      /* i: get length/literal/eob next */
       LENEXT,   /* i: getting length extra (have base) */
@@ -31,7 +25,13 @@ struct inflate_codes_state {
       WASH,     /* o: got eob, possibly still output waiting */
       END,      /* x: got eob and all data flushed */
       BADCODE}  /* x: got error */
-    mode;               /* current inflate_codes mode */
+inflate_codes_mode;
+
+/* inflate codes private state */
+struct inflate_codes_state {
+
+  /* mode */
+  inflate_codes_mode mode;      /* current inflate_codes mode */
 
   /* mode dependent information */
   uInt len;
@@ -60,7 +60,7 @@ inflate_codes_statef *inflate_codes_new(bl, bd, tl, td, z)
 uInt bl, bd;
 inflate_huft *tl;
 inflate_huft *td; /* need separate declaration for Borland C++ */
-z_stream *z;
+z_streamp z;
 {
   inflate_codes_statef *c;
 
@@ -80,7 +80,7 @@ z_stream *z;
 
 int inflate_codes(s, z, r)
 inflate_blocks_statef *s;
-z_stream *z;
+z_streamp z;
 int r;
 {
   uInt j;               /* temporary storage */
@@ -143,7 +143,7 @@ int r;
       if ((e & 64) == 0)        /* next table */
       {
         c->sub.code.need = e;
-        c->sub.code.tree = t->next;
+        c->sub.code.tree = t + t->base;
         break;
       }
       if (e & 32)               /* end of block */
@@ -181,7 +181,7 @@ int r;
       if ((e & 64) == 0)        /* next table */
       {
         c->sub.code.need = e;
-        c->sub.code.tree = t->next;
+        c->sub.code.tree = t + t->base;
         break;
       }
       c->mode = BADCODE;        /* invalid code */
@@ -196,15 +196,9 @@ int r;
       Tracevv((stderr, "inflate:         distance %u\n", c->sub.copy.dist));
       c->mode = COPY;
     case COPY:          /* o: copying bytes in window, waiting for space */
-#ifndef __TURBOC__ /* Turbo C bug for following expression */
-      f = (uInt)(q - s->window) < c->sub.copy.dist ?
-          s->end - (c->sub.copy.dist - (q - s->window)) :
-          q - c->sub.copy.dist;
-#else
       f = q - c->sub.copy.dist;
-      if ((uInt)(q - s->window) < c->sub.copy.dist)
-        f = s->end - (c->sub.copy.dist - (uInt)(q - s->window));
-#endif
+      while (f < s->window)             /* modulo window size-"while" instead */
+        f += s->end - s->window;        /* of "if" handles invalid distances */
       while (c->len)
       {
         NEEDOUT
@@ -221,6 +215,13 @@ int r;
       c->mode = START;
       break;
     case WASH:          /* o: got eob, possibly more output */
+      if (k > 7)        /* return unused byte, if any */
+      {
+        Assert(k < 16, "inflate_codes grabbed too many bytes")
+        k -= 8;
+        n++;
+        p--;            /* can always return one */
+      }
       FLUSH
       if (s->read != s->write)
         LEAVE
@@ -235,12 +236,15 @@ int r;
       r = Z_STREAM_ERROR;
       LEAVE
   }
+#ifdef NEED_DUMMY_RETURN
+  return Z_STREAM_ERROR;  /* Some dumb compilers complain without this */
+#endif
 }
 
 
 void inflate_codes_free(c, z)
 inflate_codes_statef *c;
-z_stream *z;
+z_streamp z;
 {
   ZFREE(z, c);
   Tracev((stderr, "inflate:       codes free\n"));

infcodes.h

@@ -1,5 +1,5 @@
 /* infcodes.h -- header to use infcodes.c
- * Copyright (C) 1995-1996 Mark Adler
+ * Copyright (C) 1995-2002 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -14,14 +14,14 @@ typedef struct inflate_codes_state FAR inflate_codes_statef;
 extern inflate_codes_statef *inflate_codes_new OF((
     uInt, uInt,
     inflate_huft *, inflate_huft *,
-    z_stream *));
+    z_streamp ));
 
 extern int inflate_codes OF((
     inflate_blocks_statef *,
-    z_stream *,
+    z_streamp ,
     int));
 
 extern void inflate_codes_free OF((
     inflate_codes_statef *,
-    z_stream *));
+    z_streamp ));
 

inffast.c

@@ -1,5 +1,5 @@
 /* inffast.c -- process literals and length/distance pairs fast
- * Copyright (C) 1995-1996 Mark Adler
+ * Copyright (C) 1995-2002 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -13,14 +13,12 @@
 struct inflate_codes_state {int dummy;}; /* for buggy compilers */
 
 /* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
 #define exop word.what.Exop
 #define bits word.what.Bits
 
 /* macros for bit input with no checking and for returning unused bytes */
 #define GRABBITS(j) {while(k<(j)){b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#define UNGRAB {n+=(c=k>>3);p-=c;k&=7;}
+#define UNGRAB {c=z->avail_in-n;c=(k>>3)<c?k>>3:c;n+=c;p-=c;k-=c<<3;}
 
 /* Called with number of bytes left to write in window at least 258
    (the maximum string length) and number of input bytes available
@@ -32,7 +30,7 @@ uInt bl, bd;
 inflate_huft *tl;
 inflate_huft *td; /* need separate declaration for Borland C++ */
 inflate_blocks_statef *s;
-z_stream *z;
+z_streamp z;
 {
   inflate_huft *t;      /* temporary pointer */
   uInt e;               /* extra bits or operation */
@@ -95,32 +93,48 @@ z_stream *z;
 
             /* do the copy */
             m -= c;
-            if ((uInt)(q - s->window) >= d)     /* offset before dest */
-            {                                   /*  just copy */
-              r = q - d;
-              *q++ = *r++;  c--;        /* minimum count is three, */
-              *q++ = *r++;  c--;        /*  so unroll loop a little */
-            }
-            else                        /* else offset after destination */
+            r = q - d;
+            if (r < s->window)                  /* wrap if needed */
             {
-              e = d - (uInt)(q - s->window); /* bytes from offset to end */
-              r = s->end - e;           /* pointer to offset */
-              if (c > e)                /* if source crosses, */
+              do {
+                r += s->end - s->window;        /* force pointer in window */
+              } while (r < s->window);          /* covers invalid distances */
+              e = s->end - r;
+              if (c > e)
               {
-                c -= e;                 /* copy to end of window */
+                c -= e;                         /* wrapped copy */
                 do {
-                  *q++ = *r++;
+                    *q++ = *r++;
                 } while (--e);
-                r = s->window;          /* copy rest from start of window */
+                r = s->window;
+                do {
+                    *q++ = *r++;
+                } while (--c);
+              }
+              else                              /* normal copy */
+              {
+                *q++ = *r++;  c--;
+                *q++ = *r++;  c--;
+                do {
+                    *q++ = *r++;
+                } while (--c);
               }
             }
-            do {                        /* copy all or what's left */
-              *q++ = *r++;
-            } while (--c);
+            else                                /* normal copy */
+            {
+              *q++ = *r++;  c--;
+              *q++ = *r++;  c--;
+              do {
+                *q++ = *r++;
+              } while (--c);
+            }
             break;
           }
           else if ((e & 64) == 0)
-            e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop;
+          {
+            t += t->base;
+            e = (t += ((uInt)b & inflate_mask[e]))->exop;
+          }
           else
           {
             z->msg = (char*)"invalid distance code";
@@ -133,7 +147,8 @@ z_stream *z;
       }
       if ((e & 64) == 0)
       {
-        if ((e = (t = t->next + ((uInt)b & inflate_mask[e]))->exop) == 0)
+        t += t->base;
+        if ((e = (t += ((uInt)b & inflate_mask[e]))->exop) == 0)
         {
           DUMPBITS(t->bits)
           Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?

inffast.h

@@ -1,5 +1,5 @@
 /* inffast.h -- header to use inffast.c
- * Copyright (C) 1995-1996 Mark Adler
+ * Copyright (C) 1995-2002 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -14,4 +14,4 @@ extern int inflate_fast OF((
     inflate_huft *,
     inflate_huft *,
     inflate_blocks_statef *,
-    z_stream *));
+    z_streamp ));

inffixed.h

@@ -0,0 +1,151 @@
+/* inffixed.h -- table for decoding fixed codes
+ * Generated automatically by the maketree.c program
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+local uInt fixed_bl = 9;
+local uInt fixed_bd = 5;
+local inflate_huft fixed_tl[] = {
+    {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},
+    {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},192},
+    {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},160},
+    {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},224},
+    {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},144},
+    {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},208},
+    {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},176},
+    {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},240},
+    {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},
+    {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},200},
+    {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},168},
+    {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},232},
+    {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},152},
+    {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},216},
+    {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},184},
+    {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},248},
+    {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},
+    {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},196},
+    {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},164},
+    {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},228},
+    {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},148},
+    {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},212},
+    {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},180},
+    {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},244},
+    {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},
+    {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},204},
+    {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},172},
+    {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},236},
+    {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},156},
+    {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},220},
+    {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},188},
+    {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},252},
+    {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},
+    {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},194},
+    {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},162},
+    {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},226},
+    {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},146},
+    {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},210},
+    {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},178},
+    {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},242},
+    {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},
+    {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},202},
+    {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},170},
+    {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},234},
+    {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},154},
+    {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},218},
+    {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},186},
+    {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},250},
+    {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},
+    {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},198},
+    {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},166},
+    {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},230},
+    {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},150},
+    {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},214},
+    {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},182},
+    {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},246},
+    {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},
+    {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},206},
+    {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},174},
+    {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},238},
+    {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},158},
+    {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},222},
+    {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},190},
+    {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},254},
+    {{{96,7}},256}, {{{0,8}},80}, {{{0,8}},16}, {{{84,8}},115},
+    {{{82,7}},31}, {{{0,8}},112}, {{{0,8}},48}, {{{0,9}},193},
+    {{{80,7}},10}, {{{0,8}},96}, {{{0,8}},32}, {{{0,9}},161},
+    {{{0,8}},0}, {{{0,8}},128}, {{{0,8}},64}, {{{0,9}},225},
+    {{{80,7}},6}, {{{0,8}},88}, {{{0,8}},24}, {{{0,9}},145},
+    {{{83,7}},59}, {{{0,8}},120}, {{{0,8}},56}, {{{0,9}},209},
+    {{{81,7}},17}, {{{0,8}},104}, {{{0,8}},40}, {{{0,9}},177},
+    {{{0,8}},8}, {{{0,8}},136}, {{{0,8}},72}, {{{0,9}},241},
+    {{{80,7}},4}, {{{0,8}},84}, {{{0,8}},20}, {{{85,8}},227},
+    {{{83,7}},43}, {{{0,8}},116}, {{{0,8}},52}, {{{0,9}},201},
+    {{{81,7}},13}, {{{0,8}},100}, {{{0,8}},36}, {{{0,9}},169},
+    {{{0,8}},4}, {{{0,8}},132}, {{{0,8}},68}, {{{0,9}},233},
+    {{{80,7}},8}, {{{0,8}},92}, {{{0,8}},28}, {{{0,9}},153},
+    {{{84,7}},83}, {{{0,8}},124}, {{{0,8}},60}, {{{0,9}},217},
+    {{{82,7}},23}, {{{0,8}},108}, {{{0,8}},44}, {{{0,9}},185},
+    {{{0,8}},12}, {{{0,8}},140}, {{{0,8}},76}, {{{0,9}},249},
+    {{{80,7}},3}, {{{0,8}},82}, {{{0,8}},18}, {{{85,8}},163},
+    {{{83,7}},35}, {{{0,8}},114}, {{{0,8}},50}, {{{0,9}},197},
+    {{{81,7}},11}, {{{0,8}},98}, {{{0,8}},34}, {{{0,9}},165},
+    {{{0,8}},2}, {{{0,8}},130}, {{{0,8}},66}, {{{0,9}},229},
+    {{{80,7}},7}, {{{0,8}},90}, {{{0,8}},26}, {{{0,9}},149},
+    {{{84,7}},67}, {{{0,8}},122}, {{{0,8}},58}, {{{0,9}},213},
+    {{{82,7}},19}, {{{0,8}},106}, {{{0,8}},42}, {{{0,9}},181},
+    {{{0,8}},10}, {{{0,8}},138}, {{{0,8}},74}, {{{0,9}},245},
+    {{{80,7}},5}, {{{0,8}},86}, {{{0,8}},22}, {{{192,8}},0},
+    {{{83,7}},51}, {{{0,8}},118}, {{{0,8}},54}, {{{0,9}},205},
+    {{{81,7}},15}, {{{0,8}},102}, {{{0,8}},38}, {{{0,9}},173},
+    {{{0,8}},6}, {{{0,8}},134}, {{{0,8}},70}, {{{0,9}},237},
+    {{{80,7}},9}, {{{0,8}},94}, {{{0,8}},30}, {{{0,9}},157},
+    {{{84,7}},99}, {{{0,8}},126}, {{{0,8}},62}, {{{0,9}},221},
+    {{{82,7}},27}, {{{0,8}},110}, {{{0,8}},46}, {{{0,9}},189},
+    {{{0,8}},14}, {{{0,8}},142}, {{{0,8}},78}, {{{0,9}},253},
+    {{{96,7}},256}, {{{0,8}},81}, {{{0,8}},17}, {{{85,8}},131},
+    {{{82,7}},31}, {{{0,8}},113}, {{{0,8}},49}, {{{0,9}},195},
+    {{{80,7}},10}, {{{0,8}},97}, {{{0,8}},33}, {{{0,9}},163},
+    {{{0,8}},1}, {{{0,8}},129}, {{{0,8}},65}, {{{0,9}},227},
+    {{{80,7}},6}, {{{0,8}},89}, {{{0,8}},25}, {{{0,9}},147},
+    {{{83,7}},59}, {{{0,8}},121}, {{{0,8}},57}, {{{0,9}},211},
+    {{{81,7}},17}, {{{0,8}},105}, {{{0,8}},41}, {{{0,9}},179},
+    {{{0,8}},9}, {{{0,8}},137}, {{{0,8}},73}, {{{0,9}},243},
+    {{{80,7}},4}, {{{0,8}},85}, {{{0,8}},21}, {{{80,8}},258},
+    {{{83,7}},43}, {{{0,8}},117}, {{{0,8}},53}, {{{0,9}},203},
+    {{{81,7}},13}, {{{0,8}},101}, {{{0,8}},37}, {{{0,9}},171},
+    {{{0,8}},5}, {{{0,8}},133}, {{{0,8}},69}, {{{0,9}},235},
+    {{{80,7}},8}, {{{0,8}},93}, {{{0,8}},29}, {{{0,9}},155},
+    {{{84,7}},83}, {{{0,8}},125}, {{{0,8}},61}, {{{0,9}},219},
+    {{{82,7}},23}, {{{0,8}},109}, {{{0,8}},45}, {{{0,9}},187},
+    {{{0,8}},13}, {{{0,8}},141}, {{{0,8}},77}, {{{0,9}},251},
+    {{{80,7}},3}, {{{0,8}},83}, {{{0,8}},19}, {{{85,8}},195},
+    {{{83,7}},35}, {{{0,8}},115}, {{{0,8}},51}, {{{0,9}},199},
+    {{{81,7}},11}, {{{0,8}},99}, {{{0,8}},35}, {{{0,9}},167},
+    {{{0,8}},3}, {{{0,8}},131}, {{{0,8}},67}, {{{0,9}},231},
+    {{{80,7}},7}, {{{0,8}},91}, {{{0,8}},27}, {{{0,9}},151},
+    {{{84,7}},67}, {{{0,8}},123}, {{{0,8}},59}, {{{0,9}},215},
+    {{{82,7}},19}, {{{0,8}},107}, {{{0,8}},43}, {{{0,9}},183},
+    {{{0,8}},11}, {{{0,8}},139}, {{{0,8}},75}, {{{0,9}},247},
+    {{{80,7}},5}, {{{0,8}},87}, {{{0,8}},23}, {{{192,8}},0},
+    {{{83,7}},51}, {{{0,8}},119}, {{{0,8}},55}, {{{0,9}},207},
+    {{{81,7}},15}, {{{0,8}},103}, {{{0,8}},39}, {{{0,9}},175},
+    {{{0,8}},7}, {{{0,8}},135}, {{{0,8}},71}, {{{0,9}},239},
+    {{{80,7}},9}, {{{0,8}},95}, {{{0,8}},31}, {{{0,9}},159},
+    {{{84,7}},99}, {{{0,8}},127}, {{{0,8}},63}, {{{0,9}},223},
+    {{{82,7}},27}, {{{0,8}},111}, {{{0,8}},47}, {{{0,9}},191},
+    {{{0,8}},15}, {{{0,8}},143}, {{{0,8}},79}, {{{0,9}},255}
+  };
+local inflate_huft fixed_td[] = {
+    {{{80,5}},1}, {{{87,5}},257}, {{{83,5}},17}, {{{91,5}},4097},
+    {{{81,5}},5}, {{{89,5}},1025}, {{{85,5}},65}, {{{93,5}},16385},
+    {{{80,5}},3}, {{{88,5}},513}, {{{84,5}},33}, {{{92,5}},8193},
+    {{{82,5}},9}, {{{90,5}},2049}, {{{86,5}},129}, {{{192,5}},24577},
+    {{{80,5}},2}, {{{87,5}},385}, {{{83,5}},25}, {{{91,5}},6145},
+    {{{81,5}},7}, {{{89,5}},1537}, {{{85,5}},97}, {{{93,5}},24577},
+    {{{80,5}},4}, {{{88,5}},769}, {{{84,5}},49}, {{{92,5}},12289},
+    {{{82,5}},13}, {{{90,5}},3073}, {{{86,5}},193}, {{{192,5}},24577}
+  };

inflate.c

@@ -1,5 +1,5 @@
 /* inflate.c -- zlib interface to inflate modules
- * Copyright (C) 1995-1996 Mark Adler
+ * Copyright (C) 1995-2002 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -8,11 +8,7 @@
 
 struct inflate_blocks_state {int dummy;}; /* for buggy compilers */
 
-/* inflate private state */
-struct internal_state {
-
-  /* mode */
-  enum {
+typedef enum {
       METHOD,   /* waiting for method byte */
       FLAG,     /* waiting for flag byte */
       DICT4,    /* four dictionary check bytes to go */
@@ -27,7 +23,13 @@ struct internal_state {
       CHECK1,   /* one check byte to go */
       DONE,     /* finished check, done */
       BAD}      /* got an error--stay here */
-    mode;               /* current inflate mode */
+inflate_mode;
+
+/* inflate private state */
+struct internal_state {
+
+  /* mode */
+  inflate_mode  mode;   /* current inflate mode */
 
   /* mode dependent information */
   union {
@@ -48,40 +50,36 @@ struct internal_state {
 };
 
 
-int inflateReset(z)
-z_stream *z;
+int ZEXPORT inflateReset(z)
+z_streamp z;
 {
-  uLong c;
-
   if (z == Z_NULL || z->state == Z_NULL)
     return Z_STREAM_ERROR;
   z->total_in = z->total_out = 0;
   z->msg = Z_NULL;
   z->state->mode = z->state->nowrap ? BLOCKS : METHOD;
-  inflate_blocks_reset(z->state->blocks, z, &c);
-  Trace((stderr, "inflate: reset\n"));
+  inflate_blocks_reset(z->state->blocks, z, Z_NULL);
+  Tracev((stderr, "inflate: reset\n"));
   return Z_OK;
 }
 
 
-int inflateEnd(z)
-z_stream *z;
+int ZEXPORT inflateEnd(z)
+z_streamp z;
 {
-  uLong c;
-
   if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)
     return Z_STREAM_ERROR;
   if (z->state->blocks != Z_NULL)
-    inflate_blocks_free(z->state->blocks, z, &c);
+    inflate_blocks_free(z->state->blocks, z);
   ZFREE(z, z->state);
   z->state = Z_NULL;
-  Trace((stderr, "inflate: end\n"));
+  Tracev((stderr, "inflate: end\n"));
   return Z_OK;
 }
 
 
-int inflateInit2_(z, w, version, stream_size)
-z_stream *z;
+int ZEXPORT inflateInit2_(z, w, version, stream_size)
+z_streamp z;
 int w;
 const char *version;
 int stream_size;
@@ -129,7 +127,7 @@ int stream_size;
     inflateEnd(z);
     return Z_MEM_ERROR;
   }
-  Trace((stderr, "inflate: allocated\n"));
+  Tracev((stderr, "inflate: allocated\n"));
 
   /* reset state */
   inflateReset(z);
@@ -137,8 +135,8 @@ int stream_size;
 }
 
 
-int inflateInit_(z, version, stream_size)
-z_stream *z;
+int ZEXPORT inflateInit_(z, version, stream_size)
+z_streamp z;
 const char *version;
 int stream_size;
 {
@@ -146,18 +144,19 @@ int stream_size;
 }
 
 
-#define NEEDBYTE {if(z->avail_in==0)return r;r=Z_OK;}
+#define NEEDBYTE {if(z->avail_in==0)return r;r=f;}
 #define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)
 
-int inflate(z, f)
-z_stream *z;
+int ZEXPORT inflate(z, f)
+z_streamp z;
 int f;
 {
-  int r = f;    /* to avoid warning about unused f */
+  int r;
   uInt b;
 
   if (z == Z_NULL || z->state == Z_NULL || z->next_in == Z_NULL)
     return Z_STREAM_ERROR;
+  f = f == Z_FINISH ? Z_BUF_ERROR : Z_OK;
   r = Z_BUF_ERROR;
   while (1) switch (z->state->mode)
   {
@@ -188,11 +187,11 @@ int f;
         z->state->sub.marker = 5;       /* can't try inflateSync */
         break;
       }
-      Trace((stderr, "inflate: zlib header ok\n"));
+      Tracev((stderr, "inflate: zlib header ok\n"));
       if (!(b & PRESET_DICT))
       {
         z->state->mode = BLOCKS;
-	break;
+        break;
       }
       z->state->mode = DICT4;
     case DICT4:
@@ -226,9 +225,11 @@ int f;
         z->state->sub.marker = 0;       /* can try inflateSync */
         break;
       }
+      if (r == Z_OK)
+        r = f;
       if (r != Z_STREAM_END)
         return r;
-      r = Z_OK;
+      r = f;
       inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
       if (z->state->nowrap)
       {
@@ -259,7 +260,7 @@ int f;
         z->state->sub.marker = 5;       /* can't try inflateSync */
         break;
       }
-      Trace((stderr, "inflate: zlib check ok\n"));
+      Tracev((stderr, "inflate: zlib check ok\n"));
       z->state->mode = DONE;
     case DONE:
       return Z_STREAM_END;
@@ -268,11 +269,14 @@ int f;
     default:
       return Z_STREAM_ERROR;
   }
+#ifdef NEED_DUMMY_RETURN
+  return Z_STREAM_ERROR;  /* Some dumb compilers complain without this */
+#endif
 }
 
 
-int inflateSetDictionary(z, dictionary, dictLength)
-z_stream *z;
+int ZEXPORT inflateSetDictionary(z, dictionary, dictLength)
+z_streamp z;
 const Bytef *dictionary;
 uInt  dictLength;
 {
@@ -280,22 +284,23 @@ uInt  dictLength;
 
   if (z == Z_NULL || z->state == Z_NULL || z->state->mode != DICT0)
     return Z_STREAM_ERROR;
+
   if (adler32(1L, dictionary, dictLength) != z->adler) return Z_DATA_ERROR;
   z->adler = 1L;
 
-  if (length >= (1<<z->state->wbits))
+  if (length >= ((uInt)1<<z->state->wbits))
   {
     length = (1<<z->state->wbits)-1;
     dictionary += dictLength - length;
   }
-  inflate_set_dictionary(z->state->blocks, z, dictionary, length);
+  inflate_set_dictionary(z->state->blocks, dictionary, length);
   z->state->mode = BLOCKS;
   return Z_OK;
 }
 
 
-int inflateSync(z)
-z_stream *z;
+int ZEXPORT inflateSync(z)
+z_streamp z;
 {
   uInt n;       /* number of bytes to look at */
   Bytef *p;     /* pointer to bytes */
@@ -318,7 +323,8 @@ z_stream *z;
   /* search */
   while (n && m < 4)
   {
-    if (*p == (Byte)(m < 2 ? 0 : 0xff))
+    static const Byte mark[4] = {0, 0, 0xff, 0xff};
+    if (*p == mark[m])
       m++;
     else if (*p)
       m = 0;
@@ -342,3 +348,19 @@ z_stream *z;
   z->state->mode = BLOCKS;
   return Z_OK;
 }
+
+
+/* Returns true if inflate is currently at the end of a block generated
+ * by Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP
+ * implementation to provide an additional safety check. PPP uses Z_SYNC_FLUSH
+ * but removes the length bytes of the resulting empty stored block. When
+ * decompressing, PPP checks that at the end of input packet, inflate is
+ * waiting for these length bytes.
+ */
+int ZEXPORT inflateSyncPoint(z)
+z_streamp z;
+{
+  if (z == Z_NULL || z->state == Z_NULL || z->state->blocks == Z_NULL)
+    return Z_STREAM_ERROR;
+  return inflate_blocks_sync_point(z->state->blocks);
+}

inftrees.c

@@ -1,12 +1,17 @@
 /* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-1996 Mark Adler
+ * Copyright (C) 1995-2002 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
 #include "zutil.h"
 #include "inftrees.h"
 
-char inflate_copyright[] = " inflate 1.0 Copyright 1995-1996 Mark Adler ";
+#if !defined(BUILDFIXED) && !defined(STDC)
+#  define BUILDFIXED   /* non ANSI compilers may not accept inffixed.h */
+#endif
+
+const char inflate_copyright[] =
+   " inflate 1.1.4 Copyright 1995-2002 Mark Adler ";
 /*
   If you use the zlib library in a product, an acknowledgment is welcome
   in the documentation of your product. If for some reason you cannot
@@ -16,8 +21,6 @@ char inflate_copyright[] = " inflate 1.0 Copyright 1995-1996 Mark Adler ";
 struct internal_state  {int dummy;}; /* for buggy compilers */
 
 /* simplify the use of the inflate_huft type with some defines */
-#define base more.Base
-#define next more.Next
 #define exop word.what.Exop
 #define bits word.what.Bits
 
@@ -26,30 +29,27 @@ local int huft_build OF((
     uIntf *,            /* code lengths in bits */
     uInt,               /* number of codes */
     uInt,               /* number of "simple" codes */
-    uIntf *,            /* list of base values for non-simple codes */
-    uIntf *,            /* list of extra bits for non-simple codes */
+    const uIntf *,      /* list of base values for non-simple codes */
+    const uIntf *,      /* list of extra bits for non-simple codes */
     inflate_huft * FAR*,/* result: starting table */
     uIntf *,            /* maximum lookup bits (returns actual) */
-    z_stream *));       /* for zalloc function */
-
-local voidpf falloc OF((
-    voidpf,             /* opaque pointer (not used) */
-    uInt,               /* number of items */
-    uInt));             /* size of item */
+    inflate_huft *,     /* space for trees */
+    uInt *,             /* hufts used in space */
+    uIntf * ));         /* space for values */
 
 /* Tables for deflate from PKZIP's appnote.txt. */
-local uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */
+local const uInt cplens[31] = { /* Copy lengths for literal codes 257..285 */
         3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
         35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
-        /* actually lengths - 2; also see note #13 above about 258 */
-local uInt cplext[31] = { /* Extra bits for literal codes 257..285 */
+        /* see note #13 above about 258 */
+local const uInt cplext[31] = { /* Extra bits for literal codes 257..285 */
         0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 2, 2,
-        3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 192, 192}; /* 192==invalid */
-local uInt cpdist[30] = { /* Copy offsets for distance codes 0..29 */
+        3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 0, 112, 112}; /* 112==invalid */
+local const uInt cpdist[30] = { /* Copy offsets for distance codes 0..29 */
         1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
         257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
         8193, 12289, 16385, 24577};
-local uInt cpdext[30] = { /* Extra bits for distance codes */
+local const uInt cpdext[30] = { /* Extra bits for distance codes */
         0, 0, 0, 0, 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6,
         7, 7, 8, 8, 9, 9, 10, 10, 11, 11,
         12, 12, 13, 13};
@@ -89,26 +89,22 @@ local uInt cpdext[30] = { /* Extra bits for distance codes */
 
 /* If BMAX needs to be larger than 16, then h and x[] should be uLong. */
 #define BMAX 15         /* maximum bit length of any code */
-#define N_MAX 288       /* maximum number of codes in any set */
 
-#ifdef DEBUG
-  uInt inflate_hufts;
-#endif
-
-local int huft_build(b, n, s, d, e, t, m, zs)
+local int huft_build(b, n, s, d, e, t, m, hp, hn, v)
 uIntf *b;               /* code lengths in bits (all assumed <= BMAX) */
-uInt n;                 /* number of codes (assumed <= N_MAX) */
+uInt n;                 /* number of codes (assumed <= 288) */
 uInt s;                 /* number of simple-valued codes (0..s-1) */
-uIntf *d;               /* list of base values for non-simple codes */
-uIntf *e;               /* list of extra bits for non-simple codes */  
+const uIntf *d;         /* list of base values for non-simple codes */
+const uIntf *e;         /* list of extra bits for non-simple codes */
 inflate_huft * FAR *t;  /* result: starting table */
 uIntf *m;               /* maximum lookup bits, returns actual */
-z_stream *zs;           /* for zalloc function */
+inflate_huft *hp;       /* space for trees */
+uInt *hn;               /* hufts used in space */
+uIntf *v;               /* working area: values in order of bit length */
 /* Given a list of code lengths and a maximum table size, make a set of
    tables to decode that set of codes.  Return Z_OK on success, Z_BUF_ERROR
    if the given code set is incomplete (the tables are still built in this
-   case), Z_DATA_ERROR if the input is invalid (all zero length codes or an
-   over-subscribed set of lengths), or Z_MEM_ERROR if not enough memory. */
+   case), or Z_DATA_ERROR if the input is invalid. */
 {
 
   uInt a;                       /* counter for codes of length k */
@@ -120,11 +116,11 @@ z_stream *zs;           /* for zalloc function */
   register uInt j;              /* counter */
   register int k;               /* number of bits in current code */
   int l;                        /* bits per table (returned in m) */
+  uInt mask;                    /* (1 << w) - 1, to avoid cc -O bug on HP */
   register uIntf *p;            /* pointer into c[], b[], or v[] */
   inflate_huft *q;              /* points to current table */
   struct inflate_huft_s r;      /* table entry for structure assignment */
   inflate_huft *u[BMAX];        /* table stack */
-  uInt v[N_MAX];                /* values in order of bit length */
   register int w;               /* bits before this table == (l * h) */
   uInt x[BMAX+1];               /* bit offsets, then code stack */
   uIntf *xp;                    /* pointer into x */
@@ -190,6 +186,7 @@ z_stream *zs;           /* for zalloc function */
     if ((j = *p++) != 0)
       v[x[j]++] = i;
   } while (++i < n);
+  n = x[g];                     /* set n to length of v */
 
 
   /* Generate the Huffman codes and for each, make the table entries */
@@ -215,7 +212,8 @@ z_stream *zs;           /* for zalloc function */
         w += l;                 /* previous table always l bits */
 
         /* compute minimum size table less than or equal to l bits */
-        z = (z = g - w) > (uInt)l ? l : z;      /* table size upper limit */
+        z = g - w;
+        z = z > (uInt)l ? l : z;        /* table size upper limit */
         if ((f = 1 << (j = k - w)) > a + 1)     /* try a k-w bit table */
         {                       /* too few codes for k-w bit table */
           f -= a + 1;           /* deduct codes from patterns left */
@@ -230,20 +228,11 @@ z_stream *zs;           /* for zalloc function */
         }
         z = 1 << j;             /* table entries for j-bit table */
 
-        /* allocate and link in new table */
-        if ((q = (inflate_huft *)ZALLOC
-             (zs,z + 1,sizeof(inflate_huft))) == Z_NULL)
-        {
-          if (h)
-            inflate_trees_free(u[0], zs);
-          return Z_MEM_ERROR;   /* not enough memory */
-        }
-#ifdef DEBUG
-        inflate_hufts += z + 1;
-#endif
-        *t = q + 1;             /* link to list for huft_free() */
-        *(t = &(q->next)) = Z_NULL;
-        u[h] = ++q;             /* table starts after link */
+        /* allocate new table */
+        if (*hn + z > MANY)     /* (note: doesn't matter for fixed) */
+          return Z_DATA_ERROR;  /* overflow of MANY */
+        u[h] = q = hp + *hn;
+        *hn += z;
 
         /* connect to last table, if there is one */
         if (h)
@@ -251,10 +240,12 @@ z_stream *zs;           /* for zalloc function */
           x[h] = i;             /* save pattern for backing up */
           r.bits = (Byte)l;     /* bits to dump before this table */
           r.exop = (Byte)j;     /* bits in this table */
-          r.next = q;           /* pointer to this table */
-          j = i >> (w - l);     /* (get around Turbo C bug) */
+          j = i >> (w - l);
+          r.base = (uInt)(q - u[h-1] - j);   /* offset to this table */
           u[h-1][j] = r;        /* connect to last table */
         }
+        else
+          *t = q;               /* first table is returned result */
       }
 
       /* set up table entry in r */
@@ -268,7 +259,7 @@ z_stream *zs;           /* for zalloc function */
       }
       else
       {
-        r.exop = (Byte)e[*p - s] + 16 + 64; /* non-simple--look up in lists */
+        r.exop = (Byte)(e[*p - s] + 16 + 64);/* non-simple--look up in lists */
         r.base = d[*p++ - s];
       }
 
@@ -283,10 +274,12 @@ z_stream *zs;           /* for zalloc function */
       i ^= j;
 
       /* backup over finished tables */
-      while ((i & ((1 << w) - 1)) != x[h])
+      mask = (1 << w) - 1;      /* needed on HP, cc -O bug */
+      while ((i & mask) != x[h])
       {
         h--;                    /* don't need to update q */
         w -= l;
+        mask = (1 << w) - 1;
       }
     }
   }
@@ -297,28 +290,34 @@ z_stream *zs;           /* for zalloc function */
 }
 
 
-int inflate_trees_bits(c, bb, tb, z)
+int inflate_trees_bits(c, bb, tb, hp, z)
 uIntf *c;               /* 19 code lengths */
 uIntf *bb;              /* bits tree desired/actual depth */
 inflate_huft * FAR *tb; /* bits tree result */
-z_stream *z;            /* for zfree function */
+inflate_huft *hp;       /* space for trees */
+z_streamp z;            /* for messages */
 {
   int r;
+  uInt hn = 0;          /* hufts used in space */
+  uIntf *v;             /* work area for huft_build */
 
-  r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL, tb, bb, z);
+  if ((v = (uIntf*)ZALLOC(z, 19, sizeof(uInt))) == Z_NULL)
+    return Z_MEM_ERROR;
+  r = huft_build(c, 19, 19, (uIntf*)Z_NULL, (uIntf*)Z_NULL,
+                 tb, bb, hp, &hn, v);
   if (r == Z_DATA_ERROR)
     z->msg = (char*)"oversubscribed dynamic bit lengths tree";
-  else if (r == Z_BUF_ERROR)
+  else if (r == Z_BUF_ERROR || *bb == 0)
   {
-    inflate_trees_free(*tb, z);
     z->msg = (char*)"incomplete dynamic bit lengths tree";
     r = Z_DATA_ERROR;
   }
+  ZFREE(z, v);
   return r;
 }
 
 
-int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, z)
+int inflate_trees_dynamic(nl, nd, c, bl, bd, tl, td, hp, z)
 uInt nl;                /* number of literal/length codes */
 uInt nd;                /* number of distance codes */
 uIntf *c;               /* that many (total) code lengths */
@@ -326,88 +325,100 @@ uIntf *bl;              /* literal desired/actual bit depth */
 uIntf *bd;              /* distance desired/actual bit depth */
 inflate_huft * FAR *tl; /* literal/length tree result */
 inflate_huft * FAR *td; /* distance tree result */
-z_stream *z;            /* for zfree function */
+inflate_huft *hp;       /* space for trees */
+z_streamp z;            /* for messages */
 {
   int r;
+  uInt hn = 0;          /* hufts used in space */
+  uIntf *v;             /* work area for huft_build */
+
+  /* allocate work area */
+  if ((v = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
+    return Z_MEM_ERROR;
 
   /* build literal/length tree */
-  if ((r = huft_build(c, nl, 257, cplens, cplext, tl, bl, z)) != Z_OK)
+  r = huft_build(c, nl, 257, cplens, cplext, tl, bl, hp, &hn, v);
+  if (r != Z_OK || *bl == 0)
   {
     if (r == Z_DATA_ERROR)
       z->msg = (char*)"oversubscribed literal/length tree";
-    else if (r == Z_BUF_ERROR)
+    else if (r != Z_MEM_ERROR)
     {
-      inflate_trees_free(*tl, z);
       z->msg = (char*)"incomplete literal/length tree";
       r = Z_DATA_ERROR;
     }
+    ZFREE(z, v);
     return r;
   }
 
   /* build distance tree */
-  if ((r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, z)) != Z_OK)
+  r = huft_build(c + nl, nd, 0, cpdist, cpdext, td, bd, hp, &hn, v);
+  if (r != Z_OK || (*bd == 0 && nl > 257))
   {
     if (r == Z_DATA_ERROR)
-      z->msg = (char*)"oversubscribed literal/length tree";
+      z->msg = (char*)"oversubscribed distance tree";
     else if (r == Z_BUF_ERROR) {
 #ifdef PKZIP_BUG_WORKAROUND
       r = Z_OK;
     }
 #else
-      inflate_trees_free(*td, z);
-      z->msg = (char*)"incomplete literal/length tree";
+      z->msg = (char*)"incomplete distance tree";
       r = Z_DATA_ERROR;
     }
-    inflate_trees_free(*tl, z);
+    else if (r != Z_MEM_ERROR)
+    {
+      z->msg = (char*)"empty distance tree with lengths";
+      r = Z_DATA_ERROR;
+    }
+    ZFREE(z, v);
     return r;
 #endif
   }
 
   /* done */
+  ZFREE(z, v);
   return Z_OK;
 }
 
 
 /* build fixed tables only once--keep them here */
+#ifdef BUILDFIXED
 local int fixed_built = 0;
-#define FIXEDH 530      /* number of hufts used by fixed tables */
+#define FIXEDH 544      /* number of hufts used by fixed tables */
 local inflate_huft fixed_mem[FIXEDH];
 local uInt fixed_bl;
 local uInt fixed_bd;
 local inflate_huft *fixed_tl;
 local inflate_huft *fixed_td;
+#else
+#include "inffixed.h"
+#endif
 
 
-local voidpf falloc(q, n, s)
-voidpf q;       /* opaque pointer */
-uInt n;         /* number of items */
-uInt s;         /* size of item */
-{
-  Assert(s == sizeof(inflate_huft) && n <= *(intf *)q,
-         "inflate_trees falloc overflow");
-  *(intf *)q -= n+s-s; /* s-s to avoid warning */
-  return (voidpf)(fixed_mem + *(intf *)q);
-}
-
-
-int inflate_trees_fixed(bl, bd, tl, td)
+int inflate_trees_fixed(bl, bd, tl, td, z)
 uIntf *bl;               /* literal desired/actual bit depth */
 uIntf *bd;               /* distance desired/actual bit depth */
 inflate_huft * FAR *tl;  /* literal/length tree result */
 inflate_huft * FAR *td;  /* distance tree result */
+z_streamp z;             /* for memory allocation */
 {
-  /* build fixed tables if not already (multiple overlapped executions ok) */
+#ifdef BUILDFIXED
+  /* build fixed tables if not already */
   if (!fixed_built)
   {
     int k;              /* temporary variable */
-    unsigned c[288];    /* length list for huft_build */
-    z_stream z;         /* for falloc function */
-    int f = FIXEDH;     /* number of hufts left in fixed_mem */
+    uInt f = 0;         /* number of hufts used in fixed_mem */
+    uIntf *c;           /* length list for huft_build */
+    uIntf *v;           /* work area for huft_build */
 
-    /* set up fake z_stream for memory routines */
-    z.zalloc = falloc;
-    z.zfree = Z_NULL;
-    z.opaque = (voidpf)&f;
+    /* allocate memory */
+    if ((c = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
+      return Z_MEM_ERROR;
+    if ((v = (uIntf*)ZALLOC(z, 288, sizeof(uInt))) == Z_NULL)
+    {
+      ZFREE(z, c);
+      return Z_MEM_ERROR;
+    }
 
     /* literal table */
     for (k = 0; k < 144; k++)
@@ -418,52 +429,26 @@ inflate_huft * FAR *td;  /* distance tree result */
       c[k] = 7;
     for (; k < 288; k++)
       c[k] = 8;
-    fixed_bl = 7;
-    huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl, &z);
+    fixed_bl = 9;
+    huft_build(c, 288, 257, cplens, cplext, &fixed_tl, &fixed_bl,
+               fixed_mem, &f, v);
 
     /* distance table */
     for (k = 0; k < 30; k++)
       c[k] = 5;
     fixed_bd = 5;
-    huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd, &z);
+    huft_build(c, 30, 0, cpdist, cpdext, &fixed_td, &fixed_bd,
+               fixed_mem, &f, v);
 
     /* done */
-    Assert(f == 0, "invalid build of fixed tables");
+    ZFREE(z, v);
+    ZFREE(z, c);
     fixed_built = 1;
   }
+#endif
   *bl = fixed_bl;
   *bd = fixed_bd;
   *tl = fixed_tl;
   *td = fixed_td;
   return Z_OK;
 }
-
-
-int inflate_trees_free(t, z)
-inflate_huft *t;        /* table to free */
-z_stream *z;            /* for zfree function */
-/* Free the malloc'ed tables built by huft_build(), which makes a linked
-   list of the tables it made, with the links in a dummy first entry of
-   each table. */
-{
-  register inflate_huft *p, *q, *r;
-
-  /* Reverse linked list */
-  p = Z_NULL;
-  q = t;
-  while (q != Z_NULL)
-  {
-    r = (q - 1)->next;
-    (q - 1)->next = p;
-    p = q;
-    q = r;
-  }
-  /* Go through linked list, freeing from the malloced (t[-1]) address. */
-  while (p != Z_NULL)
-  {
-    q = (--p)->next;
-    ZFREE(z,p);
-    p = q;
-  } 
-  return Z_OK;
-}

inftrees.h

@@ -1,5 +1,5 @@
 /* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995-1996 Mark Adler
+ * Copyright (C) 1995-2002 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -19,23 +19,25 @@ struct inflate_huft_s {
       Byte Exop;        /* number of extra bits or operation */
       Byte Bits;        /* number of bits in this code or subcode */
     } what;
-    Bytef *pad;         /* pad structure to a power of 2 (4 bytes for */
-  } word;               /*  16-bit, 8 bytes for 32-bit machines) */
-  union {
-    uInt Base;          /* literal, length base, or distance base */
-    inflate_huft *Next; /* pointer to next level of table */
-  } more;
+    uInt pad;           /* pad structure to a power of 2 (4 bytes for */
+  } word;               /*  16-bit, 8 bytes for 32-bit int's) */
+  uInt base;            /* literal, length base, distance base,
+                           or table offset */
 };
 
-#ifdef DEBUG
-  extern uInt inflate_hufts;
-#endif
+/* Maximum size of dynamic tree.  The maximum found in a long but non-
+   exhaustive search was 1004 huft structures (850 for length/literals
+   and 154 for distances, the latter actually the result of an
+   exhaustive search).  The actual maximum is not known, but the
+   value below is more than safe. */
+#define MANY 1440
 
 extern int inflate_trees_bits OF((
     uIntf *,                    /* 19 code lengths */
     uIntf *,                    /* bits tree desired/actual depth */
     inflate_huft * FAR *,       /* bits tree result */
-    z_stream *));               /* for zalloc, zfree functions */
+    inflate_huft *,             /* space for trees */
+    z_streamp));                /* for messages */
 
 extern int inflate_trees_dynamic OF((
     uInt,                       /* number of literal/length codes */
@@ -45,15 +47,12 @@ extern int inflate_trees_dynamic OF((
     uIntf *,                    /* distance desired/actual bit depth */
     inflate_huft * FAR *,       /* literal/length tree result */
     inflate_huft * FAR *,       /* distance tree result */
-    z_stream *));               /* for zalloc, zfree functions */
+    inflate_huft *,             /* space for trees */
+    z_streamp));                /* for messages */
 
 extern int inflate_trees_fixed OF((
     uIntf *,                    /* literal desired/actual bit depth */
     uIntf *,                    /* distance desired/actual bit depth */
     inflate_huft * FAR *,       /* literal/length tree result */
-    inflate_huft * FAR *));     /* distance tree result */
-
-extern int inflate_trees_free OF((
-    inflate_huft *,             /* tables to free */
-    z_stream *));               /* for zfree function */
-
+    inflate_huft * FAR *,       /* distance tree result */
+    z_streamp));                /* for memory allocation */

infutil.c

@@ -1,5 +1,5 @@
 /* inflate_util.c -- data and routines common to blocks and codes
- * Copyright (C) 1995-1996 Mark Adler
+ * Copyright (C) 1995-2002 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -22,11 +22,12 @@ uInt inflate_mask[17] = {
 /* copy as much as possible from the sliding window to the output area */
 int inflate_flush(s, z, r)
 inflate_blocks_statef *s;
-z_stream *z;
+z_streamp z;
 int r;
 {
   uInt n;
-  Bytef *p, *q;
+  Bytef *p;
+  Bytef *q;
 
   /* local copies of source and destination pointers */
   p = z->next_out;

infutil.h

@@ -1,5 +1,5 @@
 /* infutil.h -- types and macros common to blocks and codes
- * Copyright (C) 1995-1996 Mark Adler
+ * Copyright (C) 1995-2002 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -41,7 +41,6 @@ struct inflate_blocks_state {
       inflate_huft *tb;         /* bit length decoding tree */
     } trees;            /* if DTREE, decoding info for trees */
     struct {
-      inflate_huft *tl, *td;    /* trees to free */
       inflate_codes_statef 
          *codes;
     } decode;           /* if CODES, current state */
@@ -51,6 +50,7 @@ struct inflate_blocks_state {
   /* mode independent information */
   uInt bitk;            /* bits in bit buffer */
   uLong bitb;           /* bit buffer */
+  inflate_huft *hufts;  /* single malloc for tree space */
   Bytef *window;        /* sliding window */
   Bytef *end;           /* one byte after sliding window */
   Bytef *read;          /* window read pointer */
@@ -90,7 +90,7 @@ extern uInt inflate_mask[17];
 /* copy as much as possible from the sliding window to the output area */
 extern int inflate_flush OF((
     inflate_blocks_statef *,
-    z_stream *,
+    z_streamp ,
     int));
 
 struct internal_state      {int dummy;}; /* for buggy compilers */

maketree.c

@@ -0,0 +1,85 @@
+/* maketree.c -- make inffixed.h table for decoding fixed codes
+ * Copyright (C) 1995-2002 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h 
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* This program is included in the distribution for completeness.
+   You do not need to compile or run this program since inffixed.h
+   is already included in the distribution.  To use this program
+   you need to compile zlib with BUILDFIXED defined and then compile
+   and link this program with the zlib library.  Then the output of
+   this program can be piped to inffixed.h. */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include "zutil.h"
+#include "inftrees.h"
+
+/* simplify the use of the inflate_huft type with some defines */
+#define exop word.what.Exop
+#define bits word.what.Bits
+
+/* generate initialization table for an inflate_huft structure array */
+void maketree(uInt b, inflate_huft *t)
+{
+  int i, e;
+
+  i = 0;
+  while (1)
+  {
+    e = t[i].exop;
+    if (e && (e & (16+64)) == 0)        /* table pointer */
+    {
+      fprintf(stderr, "maketree: cannot initialize sub-tables!\n");
+      exit(1);
+    }
+    if (i % 4 == 0)
+      printf("\n   ");
+    printf(" {{{%u,%u}},%u}", t[i].exop, t[i].bits, t[i].base);
+    if (++i == (1<<b))
+      break;
+    putchar(',');
+  }
+  puts("");
+}
+
+/* create the fixed tables in C initialization syntax */
+void main(void)
+{
+  int r;
+  uInt bl, bd;
+  inflate_huft *tl, *td;
+  z_stream z;
+
+  z.zalloc = zcalloc;
+  z.opaque = (voidpf)0;
+  z.zfree = zcfree;
+  r = inflate_trees_fixed(&bl, &bd, &tl, &td, &z);
+  if (r)
+  {
+    fprintf(stderr, "inflate_trees_fixed error %d\n", r);
+    return;
+  }
+  puts("/* inffixed.h -- table for decoding fixed codes");
+  puts(" * Generated automatically by the maketree.c program");
+  puts(" */");
+  puts("");
+  puts("/* WARNING: this file should *not* be used by applications. It is");
+  puts("   part of the implementation of the compression library and is");
+  puts("   subject to change. Applications should only use zlib.h.");
+  puts(" */");
+  puts("");
+  printf("local uInt fixed_bl = %d;\n", bl);
+  printf("local uInt fixed_bd = %d;\n", bd);
+  printf("local inflate_huft fixed_tl[] = {");
+  maketree(bl, tl);
+  puts("  };");
+  printf("local inflate_huft fixed_td[] = {");
+  maketree(bd, td);
+  puts("  };");
+}

minigzip.c

@@ -1,5 +1,5 @@
 /* minigzip.c -- simulate gzip using the zlib compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -13,7 +13,7 @@
  * or in pipe mode.
  */
 
-/* $Id: minigzip.c,v 1.5 1995/05/03 17:27:11 jloup Exp $ */
+/* @(#) $Id$ */
 
 #include <stdio.h>
 #include "zlib.h"
@@ -24,7 +24,12 @@
 #else
    extern void exit  OF((int));
 #endif
-extern int unlink OF((const char *));
+
+#ifdef USE_MMAP
+#  include <sys/types.h>
+#  include <sys/mman.h>
+#  include <sys/stat.h>
+#endif
 
 #if defined(MSDOS) || defined(OS2) || defined(WIN32)
 #  include <fcntl.h>
@@ -35,29 +40,48 @@ extern int unlink OF((const char *));
 #endif
 
 #ifdef VMS
+#  define unlink delete
 #  define GZ_SUFFIX "-gz"
-#else
+#endif
+#ifdef RISCOS
+#  define unlink remove
+#  define GZ_SUFFIX "-gz"
+#  define fileno(file) file->__file
+#endif
+#if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
+#  include <unix.h> /* for fileno */
+#endif
+
+#ifndef WIN32 /* unlink already in stdio.h for WIN32 */
+  extern int unlink OF((const char *));
+#endif
+
+#ifndef GZ_SUFFIX
 #  define GZ_SUFFIX ".gz"
 #endif
-#define SUFFIX_LEN sizeof(GZ_SUFFIX)
+#define SUFFIX_LEN (sizeof(GZ_SUFFIX)-1)
 
-#define BUFLEN 4096
+#define BUFLEN      16384
 #define MAX_NAME_LEN 1024
 
-#define local static
-/* For MSDOS and other systems with limitation on stack size. For Unix,
-    #define local
-   works also.
- */
+#ifdef MAXSEG_64K
+#  define local static
+   /* Needed for systems with limitation on stack size. */
+#else
+#  define local
+#endif
 
 char *prog;
 
-void error           OF((const char *msg));
-void gz_compress     OF((FILE   *in, gzFile out));
-void gz_uncompress   OF((gzFile in, FILE   *out));
-void file_compress   OF((char  *file));
-void file_uncompress OF((char  *file));
-int  main            OF((int argc, char *argv[]));
+void error            OF((const char *msg));
+void gz_compress      OF((FILE   *in, gzFile out));
+#ifdef USE_MMAP
+int  gz_compress_mmap OF((FILE   *in, gzFile out));
+#endif
+void gz_uncompress    OF((gzFile in, FILE   *out));
+void file_compress    OF((char  *file, char *mode));
+void file_uncompress  OF((char  *file));
+int  main             OF((int argc, char *argv[]));
 
 /* ===========================================================================
  * Display error message and exit
@@ -72,6 +96,7 @@ void error(msg)
 /* ===========================================================================
  * Compress input to output then close both files.
  */
+
 void gz_compress(in, out)
     FILE   *in;
     gzFile out;
@@ -80,6 +105,12 @@ void gz_compress(in, out)
     int len;
     int err;
 
+#ifdef USE_MMAP
+    /* Try first compressing with mmap. If mmap fails (minigzip used in a
+     * pipe), use the normal fread loop.
+     */
+    if (gz_compress_mmap(in, out) == Z_OK) return;
+#endif
     for (;;) {
         len = fread(buf, 1, sizeof(buf), in);
         if (ferror(in)) {
@@ -94,6 +125,43 @@ void gz_compress(in, out)
     if (gzclose(out) != Z_OK) error("failed gzclose");
 }
 
+#ifdef USE_MMAP /* MMAP version, Miguel Albrecht <malbrech@eso.org> */
+
+/* Try compressing the input file at once using mmap. Return Z_OK if
+ * if success, Z_ERRNO otherwise.
+ */
+int gz_compress_mmap(in, out)
+    FILE   *in;
+    gzFile out;
+{
+    int len;
+    int err;
+    int ifd = fileno(in);
+    caddr_t buf;    /* mmap'ed buffer for the entire input file */
+    off_t buf_len;  /* length of the input file */
+    struct stat sb;
+
+    /* Determine the size of the file, needed for mmap: */
+    if (fstat(ifd, &sb) < 0) return Z_ERRNO;
+    buf_len = sb.st_size;
+    if (buf_len <= 0) return Z_ERRNO;
+
+    /* Now do the actual mmap: */
+    buf = mmap((caddr_t) 0, buf_len, PROT_READ, MAP_SHARED, ifd, (off_t)0); 
+    if (buf == (caddr_t)(-1)) return Z_ERRNO;
+
+    /* Compress the whole file at once: */
+    len = gzwrite(out, (char *)buf, (unsigned)buf_len);
+
+    if (len != (int)buf_len) error(gzerror(out, &err));
+
+    munmap(buf, buf_len);
+    fclose(in);
+    if (gzclose(out) != Z_OK) error("failed gzclose");
+    return Z_OK;
+}
+#endif /* USE_MMAP */
+
 /* ===========================================================================
  * Uncompress input to output then close both files.
  */
@@ -124,8 +192,9 @@ void gz_uncompress(in, out)
  * Compress the given file: create a corresponding .gz file and remove the
  * original.
  */
-void file_compress(file)
+void file_compress(file, mode)
     char  *file;
+    char  *mode;
 {
     local char outfile[MAX_NAME_LEN];
     FILE  *in;
@@ -139,7 +208,7 @@ void file_compress(file)
         perror(file);
         exit(1);
     }
-    out = gzopen(outfile, "wb"); /* use "wb9" for maximal compression */
+    out = gzopen(outfile, mode);
     if (out == NULL) {
         fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile);
         exit(1);
@@ -191,7 +260,11 @@ void file_uncompress(file)
 
 
 /* ===========================================================================
- * Usage:  minigzip [-d] [files...]
+ * Usage:  minigzip [-d] [-f] [-h] [-1 to -9] [files...]
+ *   -d : decompress
+ *   -f : compress with Z_FILTERED
+ *   -h : compress with Z_HUFFMAN_ONLY
+ *   -1 to -9 : compression level
  */
 
 int main(argc, argv)
@@ -200,15 +273,26 @@ int main(argc, argv)
 {
     int uncompr = 0;
     gzFile file;
+    char outmode[20];
+
+    strcpy(outmode, "wb6 ");
 
     prog = argv[0];
     argc--, argv++;
 
-    if (argc > 0) {
-        uncompr = (strcmp(*argv, "-d") == 0);
-        if (uncompr) {
-            argc--, argv++;
-        }
+    while (argc > 0) {
+      if (strcmp(*argv, "-d") == 0)
+	uncompr = 1;
+      else if (strcmp(*argv, "-f") == 0)
+	outmode[3] = 'f';
+      else if (strcmp(*argv, "-h") == 0)
+	outmode[3] = 'h';
+      else if ((*argv)[0] == '-' && (*argv)[1] >= '1' && (*argv)[1] <= '9' &&
+	       (*argv)[2] == 0)
+	outmode[2] = (*argv)[1];
+      else
+	break;
+      argc--, argv++;
     }
     if (argc == 0) {
         SET_BINARY_MODE(stdin);
@@ -218,7 +302,7 @@ int main(argc, argv)
             if (file == NULL) error("can't gzdopen stdin");
             gz_uncompress(file, stdout);
         } else {
-            file = gzdopen(fileno(stdout), "wb"); /* "wb9" for max compr. */
+            file = gzdopen(fileno(stdout), outmode);
             if (file == NULL) error("can't gzdopen stdout");
             gz_compress(stdin, file);
         }
@@ -227,7 +311,7 @@ int main(argc, argv)
             if (uncompr) {
                 file_uncompress(*argv);
             } else {
-                file_compress(*argv);
+                file_compress(*argv, outmode);
             }
         } while (argv++, --argc);
     }

msdos/Makefile.b32

@@ -1,25 +1,24 @@
 # Makefile for zlib
-# Borland C++   ************ UNTESTED ***********
+# Borland C++   
 
-# To use, do "make -fmakefile.bor"
-# To compile in small model, set below: MODEL=-ms
+# This version of the zlib makefile was adapted by Chris Young for use
+# with Borland C 4.5x with the Dos Power Pack for a 32-bit protected mode
+# flat memory model.  It was created for use with POV-Ray ray tracer and
+# you may choose to edit the CFLAGS to suit your needs but the
+# switches -WX and -DMSDOS are required.
+# -- Chris Young 76702.1655@compuserve.com
+
+# To use, do "make -fmakefile.b32"
 
-# WARNING: the small model is supported but only for small values of
-# MAX_WBITS and MAX_MEM_LEVEL. For example:
-#    -DMAX_WBITS=11 -DDEF_WBITS=11 -DMAX_MEM_LEVEL=3
-# If you wish to reduce the memory requirements (default 256K for big
-# objects plus a few K), you can add to CFLAGS below: 
-#   -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
 # See zconf.h for details about the memory requirements.
 
-# ------------- Turbo C++, Borland C++ -------------
-MODEL=-ml
-CFLAGS=-O2 -Z $(MODEL)
-CC=bcc
-LD=bcc
+# ------------- Borland C++ -------------
+MODEL=-WX 
+CFLAGS= $(MODEL) -P-C -K -N- -k- -d -3 -r- -v- -f -DMSDOS
+CC=bcc32
+LD=bcc32
 LIB=tlib
-#   replace bcc with tcc for Turbo C++ 1.0, with bcc32 for the 32 bit version
-LDFLAGS=$(MODEL)
+LDFLAGS= $(MODEL)
 O=.obj
 
 # variables
@@ -34,13 +33,13 @@ OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
 
 all: test
 
-adler32.obj: adler32.c zutil.h zlib.h zconf.h
+adler32.obj: adler32.c zlib.h zconf.h
 	$(CC) -c $(CFLAGS) $*.c
 
 compress.obj: compress.c zlib.h zconf.h
 	$(CC) -c $(CFLAGS) $*.c
 
-crc32.obj: crc32.c zutil.h zlib.h zconf.h
+crc32.obj: crc32.c zlib.h zconf.h
 	$(CC) -c $(CFLAGS) $*.c
 
 deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h

msdos/Makefile.bor

@@ -0,0 +1,125 @@
+# Makefile for zlib
+# Borland C++   ************ UNTESTED ***********
+
+# To use, do "make -fmakefile.bor"
+# To compile in small model, set below: MODEL=s
+
+# WARNING: the small model is supported but only for small values of
+# MAX_WBITS and MAX_MEM_LEVEL. For example:
+#    -DMAX_WBITS=11 -DDEF_WBITS=11 -DMAX_MEM_LEVEL=3
+# If you wish to reduce the memory requirements (default 256K for big
+# objects plus a few K), you can add to the LOC macro below:
+#   -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
+# See zconf.h for details about the memory requirements.
+
+# ------------- Turbo C++, Borland C++ -------------
+
+#    Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7)
+#    should be added to the environment via "set LOCAL_ZLIB=-DFOO" or added
+#    to the declaration of LOC here:
+LOC = $(LOCAL_ZLIB)
+
+# Type for CPU required: 0: 8086, 1: 80186, 2: 80286, 3: 80386, etc.
+CPU_TYP = 0
+
+# Memory model: one of s, m, c, l (small, medium, compact, large)
+MODEL=l
+
+CC=bcc
+#   replace bcc with tcc for Turbo C++ 1.0, with bcc32 for the 32 bit version
+LD=$(CC)
+AR=tlib
+
+# compiler flags
+CFLAGS=-O2 -Z -m$(MODEL) $(LOC)
+#   replace "-O2" by "-O -G -a -d" for Turbo C++ 1.0
+
+LDFLAGS=-m$(MODEL)
+
+O=.obj
+
+# variables
+OBJ1 = adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) \
+  trees$(O)
+OBJP1 = adler32$(O)+compress$(O)+crc32$(O)+gzio$(O)+uncompr$(O)+deflate$(O)+\
+  trees$(O)
+OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
+  infutil$(O) inffast$(O)
+OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
+  infutil$(O)+inffast$(O)
+
+ZLIB_H = zlib.h zconf.h
+ZUTIL_H = zutil.h $(ZLIB_H)
+
+ZLIB_LIB = zlib_$(MODEL).lib
+
+all: test
+
+# individual dependencies and action rules:
+adler32.obj: adler32.c $(ZLIB_H)
+	$(CC) -c $(CFLAGS) $*.c
+
+compress.obj: compress.c $(ZLIB_H)
+	$(CC) -c $(CFLAGS) $*.c
+
+crc32.obj: crc32.c $(ZLIB_H)
+	$(CC) -c $(CFLAGS) $*.c
+
+deflate.obj: deflate.c deflate.h $(ZUTIL_H)
+	$(CC) -c $(CFLAGS) $*.c
+
+gzio.obj: gzio.c $(ZUTIL_H)
+	$(CC) -c $(CFLAGS) $*.c
+
+infblock.obj: infblock.c $(ZUTIL_H) infblock.h inftrees.h infcodes.h infutil.h
+	$(CC) -c $(CFLAGS) $*.c
+
+infcodes.obj: infcodes.c $(ZUTIL_H) inftrees.h infutil.h infcodes.h inffast.h
+	$(CC) -c $(CFLAGS) $*.c
+
+inflate.obj: inflate.c $(ZUTIL_H) infblock.h
+	$(CC) -c $(CFLAGS) $*.c
+
+inftrees.obj: inftrees.c $(ZUTIL_H) inftrees.h
+	$(CC) -c $(CFLAGS) $*.c
+
+infutil.obj: infutil.c $(ZUTIL_H) inftrees.h infutil.h
+	$(CC) -c $(CFLAGS) $*.c
+
+inffast.obj: inffast.c $(ZUTIL_H) inftrees.h infutil.h inffast.h
+	$(CC) -c $(CFLAGS) $*.c
+
+trees.obj: trees.c deflate.h $(ZUTIL_H)
+	$(CC) -c $(CFLAGS) $*.c
+
+uncompr.obj: uncompr.c $(ZLIB_H)
+	$(CC) -c $(CFLAGS) $*.c
+
+zutil.obj: zutil.c $(ZUTIL_H)
+	$(CC) -c $(CFLAGS) $*.c
+
+example.obj: example.c $(ZLIB_H)
+	$(CC) -c $(CFLAGS) $*.c
+
+minigzip.obj: minigzip.c $(ZLIB_H)
+	$(CC) -c $(CFLAGS) $*.c
+
+# we must cut the command line to fit in the MS/DOS 128 byte limit:
+$(ZLIB_LIB): $(OBJ1) $(OBJ2)
+	del $(ZLIB_LIB)
+	$(AR) $(ZLIB_LIB) +$(OBJP1)
+	$(AR) $(ZLIB_LIB) +$(OBJP2)
+
+example.exe: example.obj $(ZLIB_LIB)
+	$(LD) $(LDFLAGS) example.obj $(ZLIB_LIB)
+
+minigzip.exe: minigzip.obj $(ZLIB_LIB)
+	$(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB)
+
+test: example.exe minigzip.exe
+	example
+	echo hello world | minigzip | minigzip -d 
+
+#clean:
+#	del *.obj
+#	del *.exe

msdos/Makefile.dj2

@@ -0,0 +1,100 @@
+# Makefile for zlib.  Modified for djgpp v2.0 by F. J. Donahoe, 3/15/96.
+# Copyright (C) 1995-1998 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h 
+
+# To compile, or to compile and test, type:
+# 
+#   make -fmakefile.dj2;  make test -fmakefile.dj2
+# 
+# To install libz.a, zconf.h and zlib.h in the djgpp directories, type:
+# 
+#    make install -fmakefile.dj2
+# 
+# after first defining LIBRARY_PATH and INCLUDE_PATH in djgpp.env as
+# in the sample below if the pattern of the DJGPP distribution is to
+# be followed.  Remember that, while <sp>'es around <=> are ignored in
+# makefiles, they are *not* in batch files or in djgpp.env.
+# - - - - -
+# [make]
+# INCLUDE_PATH=%\>;INCLUDE_PATH%%\DJDIR%\include
+# LIBRARY_PATH=%\>;LIBRARY_PATH%%\DJDIR%\lib
+# BUTT=-m486
+# - - - - -
+# Alternately, these variables may be defined below, overriding the values
+# in djgpp.env, as
+# INCLUDE_PATH=c:\usr\include
+# LIBRARY_PATH=c:\usr\lib
+
+CC=gcc
+
+#CFLAGS=-MMD -O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-MMD -g -DDEBUG
+CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+             -Wstrict-prototypes -Wmissing-prototypes
+
+# If cp.exe is available, replace "copy /Y" with "cp -fp" .
+CP=copy /Y
+# If gnu install.exe is available, replace $(CP) with ginstall.
+INSTALL=$(CP)
+# The default value of RM is "rm -f."  If "rm.exe" is found, comment out:
+RM=del
+LDLIBS=-L. -lz
+LD=$(CC) -s -o
+LDSHARED=$(CC)
+
+INCL=zlib.h zconf.h
+LIBS=libz.a
+
+AR=ar rcs
+
+prefix=/usr/local
+exec_prefix = $(prefix)
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example.exe minigzip.exe
+
+test: all
+	./example
+	echo hello world | .\minigzip | .\minigzip -d 
+
+%.o : %.c
+	$(CC) $(CFLAGS) -c $< -o $@
+
+libz.a: $(OBJS)
+	$(AR) $@ $(OBJS)
+
+%.exe : %.o $(LIBS)
+	$(LD) $@ $< $(LDLIBS)
+
+# INCLUDE_PATH and LIBRARY_PATH were set for [make] in djgpp.env .
+
+.PHONY : uninstall clean
+
+install: $(INCL) $(LIBS)
+	-@if not exist $(INCLUDE_PATH)\nul mkdir $(INCLUDE_PATH)
+	-@if not exist $(LIBRARY_PATH)\nul mkdir $(LIBRARY_PATH)
+	$(INSTALL) zlib.h $(INCLUDE_PATH)
+	$(INSTALL) zconf.h $(INCLUDE_PATH)
+	$(INSTALL) libz.a $(LIBRARY_PATH)
+
+uninstall:
+	$(RM) $(INCLUDE_PATH)\zlib.h
+	$(RM) $(INCLUDE_PATH)\zconf.h
+	$(RM) $(LIBRARY_PATH)\libz.a
+
+clean:
+	$(RM) *.d
+	$(RM) *.o
+	$(RM) *.exe
+	$(RM) libz.a
+	$(RM) foo.gz
+
+DEPS := $(wildcard *.d)
+ifneq ($(DEPS),)
+include $(DEPS)
+endif

msdos/Makefile.emx

@@ -0,0 +1,69 @@
+# Makefile for zlib.  Modified for emx 0.9c by Chr. Spieler, 6/17/98.
+# Copyright (C) 1995-1998 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h 
+
+# To compile, or to compile and test, type:
+# 
+#   make -fmakefile.emx;  make test -fmakefile.emx
+# 
+
+CC=gcc
+
+#CFLAGS=-MMD -O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-MMD -g -DDEBUG
+CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+             -Wstrict-prototypes -Wmissing-prototypes
+
+# If cp.exe is available, replace "copy /Y" with "cp -fp" .
+CP=copy /Y
+# If gnu install.exe is available, replace $(CP) with ginstall.
+INSTALL=$(CP)
+# The default value of RM is "rm -f."  If "rm.exe" is found, comment out:
+RM=del
+LDLIBS=-L. -lzlib
+LD=$(CC) -s -o
+LDSHARED=$(CC)
+
+INCL=zlib.h zconf.h
+LIBS=zlib.a
+
+AR=ar rcs
+
+prefix=/usr/local
+exec_prefix = $(prefix)
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example.exe minigzip.exe
+
+test: all
+	./example
+	echo hello world | .\minigzip | .\minigzip -d 
+
+%.o : %.c
+	$(CC) $(CFLAGS) -c $< -o $@
+
+zlib.a: $(OBJS)
+	$(AR) $@ $(OBJS)
+
+%.exe : %.o $(LIBS)
+	$(LD) $@ $< $(LDLIBS)
+
+
+.PHONY : clean
+
+clean:
+	$(RM) *.d
+	$(RM) *.o
+	$(RM) *.exe
+	$(RM) zlib.a
+	$(RM) foo.gz
+
+DEPS := $(wildcard *.d)
+ifneq ($(DEPS),)
+include $(DEPS)
+endif

msdos/Makefile.msc

@@ -0,0 +1,121 @@
+# Makefile for zlib
+# Microsoft C 5.1 or later
+
+# To use, do "make makefile.msc"
+# To compile in small model, set below: MODEL=S
+
+# If you wish to reduce the memory requirements (default 256K for big
+# objects plus a few K), you can add to the LOC macro below:
+#   -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
+# See zconf.h for details about the memory requirements.
+
+# ------------- Microsoft C 5.1 and later -------------
+
+#    Optional nonstandard preprocessor flags (e.g. -DMAX_MEM_LEVEL=7)
+#    should be added to the environment via "set LOCAL_ZLIB=-DFOO" or added
+#    to the declaration of LOC here:
+LOC = $(LOCAL_ZLIB)
+
+# Type for CPU required: 0: 8086, 1: 80186, 2: 80286, 3: 80386, etc.
+CPU_TYP = 0
+
+# Memory model: one of S, M, C, L (small, medium, compact, large)
+MODEL=L
+
+CC=cl
+CFLAGS=-nologo -A$(MODEL) -G$(CPU_TYP) -W3 -Oait -Gs $(LOC)
+#-Ox generates bad code with MSC 5.1
+LIB_CFLAGS=-Zl $(CFLAGS)
+
+LD=link
+LDFLAGS=/noi/e/st:0x1500/noe/farcall/packcode
+# "/farcall/packcode" are only useful for `large code' memory models
+# but should be a "no-op" for small code models.
+
+O=.obj
+
+# variables
+OBJ1 = adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) \
+  trees$(O)
+OBJP1 = adler32$(O)+compress$(O)+crc32$(O)+gzio$(O)+uncompr$(O)+deflate$(O)+\
+  trees$(O)
+OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
+  infutil$(O) inffast$(O)
+OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
+  infutil$(O)+inffast$(O)
+
+ZLIB_H = zlib.h zconf.h
+ZUTIL_H = zutil.h $(ZLIB_H)
+
+ZLIB_LIB = zlib_$(MODEL).lib
+
+all:  $(ZLIB_LIB) example.exe minigzip.exe
+
+# individual dependencies and action rules:
+adler32.obj: adler32.c $(ZLIB_H)
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+compress.obj: compress.c $(ZLIB_H)
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+crc32.obj: crc32.c $(ZLIB_H)
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+deflate.obj: deflate.c deflate.h $(ZUTIL_H)
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+gzio.obj: gzio.c $(ZUTIL_H)
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+infblock.obj: infblock.c $(ZUTIL_H) infblock.h inftrees.h infcodes.h infutil.h
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+infcodes.obj: infcodes.c $(ZUTIL_H) inftrees.h infutil.h infcodes.h inffast.h
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+inflate.obj: inflate.c $(ZUTIL_H) infblock.h
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+inftrees.obj: inftrees.c $(ZUTIL_H) inftrees.h
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+infutil.obj: infutil.c $(ZUTIL_H) inftrees.h infutil.h
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+inffast.obj: inffast.c $(ZUTIL_H) inftrees.h infutil.h inffast.h
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+trees.obj: trees.c deflate.h $(ZUTIL_H)
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+uncompr.obj: uncompr.c $(ZLIB_H)
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+zutil.obj: zutil.c $(ZUTIL_H)
+	$(CC) -c $(LIB_CFLAGS) $*.c
+
+example.obj: example.c $(ZLIB_H)
+	$(CC) -c $(CFLAGS) $*.c
+
+minigzip.obj: minigzip.c $(ZLIB_H)
+	$(CC) -c $(CFLAGS) $*.c
+
+# we must cut the command line to fit in the MS/DOS 128 byte limit:
+$(ZLIB_LIB): $(OBJ1) $(OBJ2)
+	if exist $(ZLIB_LIB) del $(ZLIB_LIB)
+	lib $(ZLIB_LIB) $(OBJ1);
+	lib $(ZLIB_LIB) $(OBJ2);
+
+example.exe: example.obj $(ZLIB_LIB)
+	$(LD) $(LDFLAGS) example.obj,,,$(ZLIB_LIB);
+
+minigzip.exe: minigzip.obj $(ZLIB_LIB)
+	$(LD) $(LDFLAGS) minigzip.obj,,,$(ZLIB_LIB);
+
+test: example.exe minigzip.exe
+	example
+	echo hello world | minigzip | minigzip -d 
+
+#clean:
+#	del *.obj
+#	del *.exe

msdos/Makefile.tc

@@ -13,13 +13,13 @@
 # See zconf.h for details about the memory requirements.
 
 # ------------- Turbo C 2.0 -------------
-MODEL=-ml
-# CFLAGS=-O2 -G -Z $(MODEL) -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
-CFLAGS=-O2 -G -Z $(MODEL)
+MODEL=l
+# CFLAGS=-O2 -G -Z -m$(MODEL) -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
+CFLAGS=-O2 -G -Z -m$(MODEL)
 CC=tcc -I\tc\include
 LD=tcc -L\tc\lib
-LIB=tlib
-LDFLAGS=$(MODEL) -f-
+AR=tlib
+LDFLAGS=-m$(MODEL) -f-
 O=.obj
 
 # variables
@@ -32,69 +32,72 @@ OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
 OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
   infutil$(O)+inffast$(O)
 
+ZLIB_H = zlib.h zconf.h
+ZUTIL_H = zutil.h $(ZLIB_H)
+
+ZLIB_LIB = zlib_$(MODEL).lib
+
 all: test
 
-adler32.obj: adler32.c zutil.h zlib.h zconf.h
+adler32.obj: adler32.c $(ZLIB_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-compress.obj: compress.c zlib.h zconf.h
+compress.obj: compress.c $(ZLIB_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-crc32.obj: crc32.c zutil.h zlib.h zconf.h
+crc32.obj: crc32.c $(ZLIB_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+deflate.obj: deflate.c deflate.h $(ZUTIL_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-gzio.obj: gzio.c zutil.h zlib.h zconf.h
+gzio.obj: gzio.c $(ZUTIL_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h\
-   infcodes.h infutil.h
+infblock.obj: infblock.c $(ZUTIL_H) infblock.h inftrees.h infcodes.h infutil.h
 	$(CC) -c $(CFLAGS) $*.c
 
-infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h\
-   infcodes.h inffast.h
+infcodes.obj: infcodes.c $(ZUTIL_H) inftrees.h infutil.h infcodes.h inffast.h
 	$(CC) -c $(CFLAGS) $*.c
 
-inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
+inflate.obj: inflate.c $(ZUTIL_H) infblock.h
 	$(CC) -c $(CFLAGS) $*.c
 
-inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+inftrees.obj: inftrees.c $(ZUTIL_H) inftrees.h
 	$(CC) -c $(CFLAGS) $*.c
 
-infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
+infutil.obj: infutil.c $(ZUTIL_H) inftrees.h infutil.h
 	$(CC) -c $(CFLAGS) $*.c
 
-inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+inffast.obj: inffast.c $(ZUTIL_H) inftrees.h infutil.h inffast.h
 	$(CC) -c $(CFLAGS) $*.c
 
-trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
+trees.obj: trees.c deflate.h $(ZUTIL_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-uncompr.obj: uncompr.c zlib.h zconf.h
+uncompr.obj: uncompr.c $(ZLIB_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-zutil.obj: zutil.c zutil.h zlib.h zconf.h
+zutil.obj: zutil.c $(ZUTIL_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-example.obj: example.c zlib.h zconf.h
+example.obj: example.c $(ZLIB_H)
 	$(CC) -c $(CFLAGS) $*.c
 
-minigzip.obj: minigzip.c zlib.h zconf.h
+minigzip.obj: minigzip.c $(ZLIB_H)
 	$(CC) -c $(CFLAGS) $*.c
 
 # we must cut the command line to fit in the MS/DOS 128 byte limit:
-zlib.lib: $(OBJ1) $(OBJ2)
-	del zlib.lib
-	$(LIB) zlib +$(OBJP1)
-	$(LIB) zlib +$(OBJP2)
+$(ZLIB_LIB): $(OBJ1) $(OBJ2)
+	del $(ZLIB_LIB)
+	$(AR) $(ZLIB_LIB) +$(OBJP1)
+	$(AR) $(ZLIB_LIB) +$(OBJP2)
 
-example.exe: example.obj zlib.lib
-	$(LD) $(LDFLAGS) -eexample.exe example.obj zlib.lib
+example.exe: example.obj $(ZLIB_LIB)
+	$(LD) $(LDFLAGS) -eexample.exe example.obj $(ZLIB_LIB)
 
-minigzip.exe: minigzip.obj zlib.lib
-	$(LD) $(LDFLAGS) -eminigzip.exe minigzip.obj zlib.lib
+minigzip.exe: minigzip.obj $(ZLIB_LIB)
+	$(LD) $(LDFLAGS) -eminigzip.exe minigzip.obj $(ZLIB_LIB)
 
 test: example.exe minigzip.exe
 	example

msdos/Makefile.w32

@@ -1,21 +1,19 @@
 # Makefile for zlib
-# Microsoft C 5.1 or later
+# Microsoft 32-bit Visual C++ 4.0 or later (may work on earlier versions)
 
-# To use, do "make makefile.msc"
-# To compile in small model, set below: MODEL=-AS
+# To use, do "nmake /f makefile.w32"
 
 # If you wish to reduce the memory requirements (default 256K for big
 # objects plus a few K), you can add to CFLAGS below: 
 #   -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
 # See zconf.h for details about the memory requirements.
 
-# ------------- Microsoft C 5.1 and later -------------
-MODEL=-AL
-CFLAGS=-Oait -Gs -nologo -W3 $(MODEL)
-#-Ox generates bad code with MSC 5.1
+# ------------- Microsoft Visual C++ 4.0 and later -------------
+MODEL=
+CFLAGS=-Ox -GA3s -nologo -W3
 CC=cl
 LD=link
-LDFLAGS=/e/st:0x1000/noe
+LDFLAGS=
 O=.obj
 
 # variables
@@ -28,72 +26,72 @@ OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
 OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
   infutil$(O)+inffast$(O)
 
-adler32.obj: adler32.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
+all:  zlib.lib example.exe minigzip.exe
+
+adler32.obj: adler32.c zlib.h zconf.h
+  $(CC) -c $(CFLAGS) $*.c
 
 compress.obj: compress.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
-crc32.obj: crc32.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
+crc32.obj: crc32.c zlib.h zconf.h
+  $(CC) -c $(CFLAGS) $*.c
 
 deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
 gzio.obj: gzio.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
 infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h\
    infcodes.h infutil.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
 infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h\
    infcodes.h inffast.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
 inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
 inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
 infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
 inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
 trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
 uncompr.obj: uncompr.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
 zutil.obj: zutil.c zutil.h zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
 example.obj: example.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
 minigzip.obj: minigzip.c zlib.h zconf.h
-	$(CC) -c $(CFLAGS) $*.c
+  $(CC) -c $(CFLAGS) $*.c
 
-# we must cut the command line to fit in the MS/DOS 128 byte limit:
 zlib.lib: $(OBJ1) $(OBJ2)
-        del zlib.lib
-	lib zlib $(OBJ1);
-	lib zlib $(OBJ2);
+  if exist zlib.lib del zlib.lib
+  lib /OUT:zlib.lib $(OBJ1) $(OBJ2)
 
 example.exe: example.obj zlib.lib
-	$(LD) $(LDFLAGS) example.obj,,,zlib.lib;
+  $(LD) $(LDFLAGS) example.obj zlib.lib /OUT:example.exe /SUBSYSTEM:CONSOLE
 
 minigzip.exe: minigzip.obj zlib.lib
-	$(LD) $(LDFLAGS) minigzip.obj,,,zlib.lib;
+  $(LD) $(LDFLAGS) minigzip.obj zlib.lib /OUT:minigzip.exe /SUBSYSTEM:CONSOLE
 
 test: example.exe minigzip.exe
-	example
-	echo hello world | minigzip | minigzip -d 
+  example
+  echo hello world | minigzip | minigzip -d 
 
 #clean:
-#	del *.obj
-#	del *.exe
+#  del *.obj
+#  del *.exe

msdos/Makefile.wat

@@ -0,0 +1,103 @@
+# Makefile for zlib
+# Watcom 10a
+
+# This version of the zlib makefile was adapted by Chris Young for use
+# with Watcom 10a 32-bit protected mode flat memory model.  It was created 
+# for use with POV-Ray ray tracer and you may choose to edit the CFLAGS to 
+# suit your needs but the -DMSDOS is required.
+# -- Chris Young 76702.1655@compuserve.com
+
+# To use, do "wmake -f makefile.wat"
+
+# See zconf.h for details about the memory requirements.
+
+# ------------- Watcom 10a -------------
+MODEL=-mf 
+CFLAGS= $(MODEL) -fpi87 -fp5 -zp4 -5r -w5 -oneatx -DMSDOS
+CC=wcc386
+LD=wcl386
+LIB=wlib -b -c 
+LDFLAGS= 
+O=.obj
+
+# variables
+OBJ1=adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) 
+OBJ2=trees$(O) zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) 
+OBJ3=infutil$(O) inffast$(O)
+OBJP1=adler32$(O)+compress$(O)+crc32$(O)+gzio$(O)+uncompr$(O)+deflate$(O)
+OBJP2=trees$(O)+zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)
+OBJP3=infutil$(O)+inffast$(O)
+
+all: test
+
+adler32.obj: adler32.c zlib.h zconf.h
+	$(CC) $(CFLAGS) $*.c
+
+compress.obj: compress.c zlib.h zconf.h
+	$(CC) $(CFLAGS) $*.c
+
+crc32.obj: crc32.c zlib.h zconf.h
+	$(CC) $(CFLAGS) $*.c
+
+deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+	$(CC) $(CFLAGS) $*.c
+
+gzio.obj: gzio.c zutil.h zlib.h zconf.h
+	$(CC) $(CFLAGS) $*.c
+
+infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h &
+  infcodes.h infutil.h
+	$(CC) $(CFLAGS) $*.c
+
+infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h &
+  infcodes.h inffast.h
+	$(CC) $(CFLAGS) $*.c
+
+inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
+	$(CC) $(CFLAGS) $*.c
+
+inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+	$(CC) $(CFLAGS) $*.c
+
+infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
+	$(CC) $(CFLAGS) $*.c
+
+inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+	$(CC) $(CFLAGS) $*.c
+
+trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
+	$(CC) $(CFLAGS) $*.c
+
+uncompr.obj: uncompr.c zlib.h zconf.h
+	$(CC) $(CFLAGS) $*.c
+
+zutil.obj: zutil.c zutil.h zlib.h zconf.h
+	$(CC) $(CFLAGS) $*.c
+
+example.obj: example.c zlib.h zconf.h
+	$(CC) $(CFLAGS) $*.c
+
+minigzip.obj: minigzip.c zlib.h zconf.h
+	$(CC) $(CFLAGS) $*.c
+
+# we must cut the command line to fit in the MS/DOS 128 byte limit:
+zlib.lib: $(OBJ1) $(OBJ2) $(OBJ3) 
+	del zlib.lib
+	$(LIB) zlib.lib +$(OBJP1)
+	$(LIB) zlib.lib +$(OBJP2)
+	$(LIB) zlib.lib +$(OBJP3)
+
+example.exe: example.obj zlib.lib
+	$(LD) $(LDFLAGS) example.obj zlib.lib
+
+minigzip.exe: minigzip.obj zlib.lib
+	$(LD) $(LDFLAGS) minigzip.obj zlib.lib
+
+test: minigzip.exe example.exe
+	example
+	echo hello world | minigzip | minigzip -d >test
+	type test
+
+#clean:
+#	del *.obj
+#	del *.exe

msdos/zlib.def

@@ -0,0 +1,60 @@
+LIBRARY		"zlib"
+
+DESCRIPTION	'"""zlib data compression library"""'
+
+EXETYPE		NT
+
+SUBSYSTEM	WINDOWS
+
+STUB		'WINSTUB.EXE'
+
+VERSION		1.13
+
+CODE		 EXECUTE READ
+
+DATA		 READ WRITE
+
+HEAPSIZE	1048576,4096
+
+EXPORTS
+    adler32                        @1
+    compress                       @2
+    crc32                          @3
+    deflate                        @4
+    deflateCopy                    @5
+    deflateEnd                     @6
+    deflateInit2_                  @7
+    deflateInit_                   @8
+    deflateParams                  @9
+    deflateReset                   @10
+    deflateSetDictionary           @11
+    gzclose                        @12
+    gzdopen                        @13
+    gzerror                        @14
+    gzflush                        @15
+    gzopen                         @16
+    gzread                         @17
+    gzwrite                        @18
+    inflate                        @19
+    inflateEnd                     @20
+    inflateInit2_                  @21
+    inflateInit_                   @22
+    inflateReset                   @23
+    inflateSetDictionary           @24
+    inflateSync                    @25
+    uncompress                     @26
+    zlibVersion                    @27
+    gzprintf                       @28
+    gzputc                         @29
+    gzgetc                         @30
+    gzseek                         @31
+    gzrewind                       @32
+    gztell                         @33
+    gzeof                          @34
+    gzsetparams                    @35
+    zError                         @36
+    inflateSyncPoint               @37
+    get_crc_table                  @38
+    compress2                      @39
+    gzputs                         @40
+    gzgets                         @41

msdos/zlib.rc

@@ -0,0 +1,32 @@
+#include <windows.h>
+
+#define IDR_VERSION1  1
+IDR_VERSION1	VERSIONINFO	MOVEABLE IMPURE LOADONCALL DISCARDABLE
+  FILEVERSION	 1,1,3,0
+  PRODUCTVERSION 1,1,3,0
+  FILEFLAGSMASK	VS_FFI_FILEFLAGSMASK
+  FILEFLAGS	0
+  FILEOS	VOS_DOS_WINDOWS32
+  FILETYPE	VFT_DLL
+  FILESUBTYPE	0	// not used
+BEGIN
+  BLOCK "StringFileInfo"
+  BEGIN
+    BLOCK "040904E4"
+    //language ID = U.S. English, char set = Windows, Multilingual
+
+    BEGIN
+      VALUE "FileDescription", "zlib data compression library\0"
+      VALUE "FileVersion",	"1.1.3\0"
+      VALUE "InternalName",	"zlib\0"
+      VALUE "OriginalFilename",	"zlib.dll\0"
+      VALUE "ProductName",	"ZLib.DLL\0"
+      VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
+      VALUE "LegalCopyright", "(C) 1995-1998 Jean-loup Gailly & Mark Adler\0"
+    END
+  END
+  BLOCK "VarFileInfo"
+  BEGIN
+    VALUE "Translation", 0x0409, 1252
+  END
+END

nt/Makefile.emx

@@ -0,0 +1,138 @@
+# Makefile for zlib.  Modified for emx/rsxnt by Chr. Spieler, 6/16/98.
+# Copyright (C) 1995-1998 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h 
+
+# To compile, or to compile and test, type:
+# 
+#   make -fmakefile.emx;  make test -fmakefile.emx
+# 
+
+CC=gcc -Zwin32
+
+#CFLAGS=-MMD -O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-MMD -g -DDEBUG
+CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+             -Wstrict-prototypes -Wmissing-prototypes
+
+# If cp.exe is available, replace "copy /Y" with "cp -fp" .
+CP=copy /Y
+# If gnu install.exe is available, replace $(CP) with ginstall.
+INSTALL=$(CP)
+# The default value of RM is "rm -f."  If "rm.exe" is found, comment out:
+RM=del
+LDLIBS=-L. -lzlib
+LD=$(CC) -s -o
+LDSHARED=$(CC)
+
+INCL=zlib.h zconf.h
+LIBS=zlib.a
+
+AR=ar rcs
+
+prefix=/usr/local
+exec_prefix = $(prefix)
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example.exe minigzip.exe
+
+test: all
+	./example
+	echo hello world | .\minigzip | .\minigzip -d 
+
+%.o : %.c
+	$(CC) $(CFLAGS) -c $< -o $@
+
+zlib.a: $(OBJS)
+	$(AR) $@ $(OBJS)
+
+%.exe : %.o $(LIBS)
+	$(LD) $@ $< $(LDLIBS)
+
+
+.PHONY : clean
+
+clean:
+	$(RM) *.d
+	$(RM) *.o
+	$(RM) *.exe
+	$(RM) zlib.a
+	$(RM) foo.gz
+
+DEPS := $(wildcard *.d)
+ifneq ($(DEPS),)
+include $(DEPS)
+endif
+# Makefile for zlib.  Modified for emx 0.9c by Chr. Spieler, 6/17/98.
+# Copyright (C) 1995-1998 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h 
+
+# To compile, or to compile and test, type:
+# 
+#   make -fmakefile.emx;  make test -fmakefile.emx
+# 
+
+CC=gcc
+
+#CFLAGS=-MMD -O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-MMD -g -DDEBUG
+CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+             -Wstrict-prototypes -Wmissing-prototypes
+
+# If cp.exe is available, replace "copy /Y" with "cp -fp" .
+CP=copy /Y
+# If gnu install.exe is available, replace $(CP) with ginstall.
+INSTALL=$(CP)
+# The default value of RM is "rm -f."  If "rm.exe" is found, comment out:
+RM=del
+LDLIBS=-L. -lzlib
+LD=$(CC) -s -o
+LDSHARED=$(CC)
+
+INCL=zlib.h zconf.h
+LIBS=zlib.a
+
+AR=ar rcs
+
+prefix=/usr/local
+exec_prefix = $(prefix)
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example.exe minigzip.exe
+
+test: all
+	./example
+	echo hello world | .\minigzip | .\minigzip -d 
+
+%.o : %.c
+	$(CC) $(CFLAGS) -c $< -o $@
+
+zlib.a: $(OBJS)
+	$(AR) $@ $(OBJS)
+
+%.exe : %.o $(LIBS)
+	$(LD) $@ $< $(LDLIBS)
+
+
+.PHONY : clean
+
+clean:
+	$(RM) *.d
+	$(RM) *.o
+	$(RM) *.exe
+	$(RM) zlib.a
+	$(RM) foo.gz
+
+DEPS := $(wildcard *.d)
+ifneq ($(DEPS),)
+include $(DEPS)
+endif

nt/Makefile.gcc

@@ -0,0 +1,87 @@
+# Makefile for zlib.  Modified for mingw32 by C. Spieler, 6/16/98.
+# (This Makefile is directly derived from Makefile.dj2)
+# Copyright (C) 1995-1998 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h 
+
+# To compile, or to compile and test, type:
+# 
+#   make -fmakefile.gcc;  make test -fmakefile.gcc
+# 
+# To install libz.a, zconf.h and zlib.h in the mingw32 directories, type:
+# 
+#    make install -fmakefile.gcc
+# 
+
+CC=gcc
+
+#CFLAGS=-MMD -O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-MMD -g -DDEBUG
+CFLAGS=-MMD -O3 $(BUTT) -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+             -Wstrict-prototypes -Wmissing-prototypes
+
+# If cp.exe is available, replace "copy /Y" with "cp -fp" .
+CP=copy /Y
+# If gnu install.exe is available, replace $(CP) with ginstall.
+INSTALL=$(CP)
+# The default value of RM is "rm -f."  If "rm.exe" is found, comment out:
+RM=del
+LDLIBS=-L. -lz
+LD=$(CC) -s -o
+LDSHARED=$(CC)
+
+INCL=zlib.h zconf.h
+LIBS=libz.a
+
+AR=ar rcs
+
+prefix=/usr/local
+exec_prefix = $(prefix)
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example.exe minigzip.exe
+
+test: all
+	./example
+	echo hello world | .\minigzip | .\minigzip -d 
+
+%.o : %.c
+	$(CC) $(CFLAGS) -c $< -o $@
+
+libz.a: $(OBJS)
+	$(AR) $@ $(OBJS)
+
+%.exe : %.o $(LIBS)
+	$(LD) $@ $< $(LDLIBS)
+
+# INCLUDE_PATH and LIBRARY_PATH were set for [make] in djgpp.env .
+
+.PHONY : uninstall clean
+
+install: $(INCL) $(LIBS)
+	-@if not exist $(INCLUDE_PATH)\nul mkdir $(INCLUDE_PATH)
+	-@if not exist $(LIBRARY_PATH)\nul mkdir $(LIBRARY_PATH)
+	$(INSTALL) zlib.h $(INCLUDE_PATH)
+	$(INSTALL) zconf.h $(INCLUDE_PATH)
+	$(INSTALL) libz.a $(LIBRARY_PATH)
+
+uninstall:
+	$(RM) $(INCLUDE_PATH)\zlib.h
+	$(RM) $(INCLUDE_PATH)\zconf.h
+	$(RM) $(LIBRARY_PATH)\libz.a
+
+clean:
+	$(RM) *.d
+	$(RM) *.o
+	$(RM) *.exe
+	$(RM) libz.a
+	$(RM) foo.gz
+
+DEPS := $(wildcard *.d)
+ifneq ($(DEPS),)
+include $(DEPS)
+endif

nt/Makefile.nt

@@ -0,0 +1,88 @@
+# Makefile for zlib
+
+!include <ntwin32.mak>
+
+CC=cl
+LD=link
+CFLAGS=-O -nologo
+LDFLAGS=
+O=.obj
+
+# variables
+OBJ1 = adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) \
+  trees$(O)
+OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
+  infutil$(O) inffast$(O)
+
+all:  zlib.dll example.exe minigzip.exe
+
+adler32.obj: adler32.c zutil.h zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+compress.obj: compress.c zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+crc32.obj: crc32.c zutil.h zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+gzio.obj: gzio.c zutil.h zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h\
+   infcodes.h infutil.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h\
+   infcodes.h inffast.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+uncompr.obj: uncompr.c zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+zutil.obj: zutil.c zutil.h zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+example.obj: example.c zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+minigzip.obj: minigzip.c zlib.h zconf.h
+	$(CC) -c $(cvarsdll) $(CFLAGS) $*.c
+
+zlib.dll: $(OBJ1) $(OBJ2) zlib.dnt
+	link $(dlllflags) -out:$@ -def:zlib.dnt $(OBJ1) $(OBJ2) $(guilibsdll)
+
+zlib.lib: zlib.dll
+
+example.exe: example.obj zlib.lib
+	$(LD) $(LDFLAGS) example.obj zlib.lib
+
+minigzip.exe: minigzip.obj zlib.lib
+	$(LD) $(LDFLAGS) minigzip.obj zlib.lib
+
+test: example.exe minigzip.exe
+	example
+	echo hello world | minigzip | minigzip -d 
+
+clean:
+	del *.obj
+	del *.exe
+	del *.dll
+	del *.lib

nt/zlib.dnt

@@ -0,0 +1,47 @@
+LIBRARY		zlib.dll
+EXETYPE WINDOWS
+CODE		 PRELOAD MOVEABLE DISCARDABLE
+DATA		 PRELOAD MOVEABLE MULTIPLE
+
+EXPORTS
+    adler32                        @1
+    compress                       @2
+    crc32                          @3
+    deflate                        @4
+    deflateCopy                    @5
+    deflateEnd                     @6
+    deflateInit2_                  @7
+    deflateInit_                   @8
+    deflateParams                  @9
+    deflateReset                   @10
+    deflateSetDictionary           @11
+    gzclose                        @12
+    gzdopen                        @13
+    gzerror                        @14
+    gzflush                        @15
+    gzopen                         @16
+    gzread                         @17
+    gzwrite                        @18
+    inflate                        @19
+    inflateEnd                     @20
+    inflateInit2_                  @21
+    inflateInit_                   @22
+    inflateReset                   @23
+    inflateSetDictionary           @24
+    inflateSync                    @25
+    uncompress                     @26
+    zlibVersion                    @27
+    gzprintf                       @28
+    gzputc                         @29
+    gzgetc                         @30
+    gzseek                         @31
+    gzrewind                       @32
+    gztell                         @33
+    gzeof                          @34
+    gzsetparams                    @35
+    zError                         @36
+    inflateSyncPoint               @37
+    get_crc_table                  @38
+    compress2                      @39
+    gzputs                         @40
+    gzgets                         @41

os2/Makefile.os2

@@ -0,0 +1,136 @@
+# Makefile for zlib under OS/2 using GCC (PGCC)
+# For conditions of distribution and use, see copyright notice in zlib.h 
+
+# To compile and test, type:
+#   cp Makefile.os2 ..
+#   cd ..
+#   make -f Makefile.os2 test
+
+# This makefile will build a static library z.lib, a shared library
+# z.dll and a import library zdll.lib. You can use either z.lib or
+# zdll.lib by specifying either -lz or -lzdll on gcc's command line
+
+CC=gcc -Zomf -s
+
+CFLAGS=-O6 -Wall
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-g -DDEBUG
+#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+#           -Wstrict-prototypes -Wmissing-prototypes
+
+#################### BUG WARNING: #####################
+## infcodes.c hits a bug in pgcc-1.0, so you have to use either
+## -O# where # <= 4 or one of (-fno-ommit-frame-pointer or -fno-force-mem)
+## This bug is reportedly fixed in pgcc >1.0, but this was not tested
+CFLAGS+=-fno-force-mem
+
+LDFLAGS=-s -L. -lzdll -Zcrtdll
+LDSHARED=$(CC) -s -Zomf -Zdll -Zcrtdll
+
+VER=1.1.0
+ZLIB=z.lib
+SHAREDLIB=z.dll
+SHAREDLIBIMP=zdll.lib
+LIBS=$(ZLIB) $(SHAREDLIB) $(SHAREDLIBIMP)
+
+AR=emxomfar cr
+IMPLIB=emximp
+RANLIB=echo
+TAR=tar
+SHELL=bash
+
+prefix=/usr/local
+exec_prefix = $(prefix)
+
+OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
+       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+DISTFILES = README INDEX ChangeLog configure Make*[a-z0-9] *.[ch] descrip.mms \
+  algorithm.txt zlib.3 msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \
+  nt/Makefile.nt nt/zlib.dnt  contrib/README.contrib contrib/*.txt \
+  contrib/asm386/*.asm contrib/asm386/*.c \
+  contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/iostream/*.cpp \
+  contrib/iostream/*.h  contrib/iostream2/*.h contrib/iostream2/*.cpp \
+  contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32
+
+all: example.exe minigzip.exe
+
+test: all
+	@LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
+	echo hello world | ./minigzip | ./minigzip -d || \
+	  echo '		*** minigzip test FAILED ***' ; \
+	if ./example; then \
+	  echo '		*** zlib test OK ***'; \
+	else \
+	  echo '		*** zlib test FAILED ***'; \
+	fi
+
+$(ZLIB): $(OBJS)
+	$(AR) $@ $(OBJS)
+	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
+
+$(SHAREDLIB): $(OBJS) os2/z.def
+	$(LDSHARED) -o $@ $^
+
+$(SHAREDLIBIMP): os2/z.def
+	$(IMPLIB) -o $@ $^
+
+example.exe: example.o $(LIBS)
+	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
+
+minigzip.exe: minigzip.o $(LIBS)
+	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
+
+clean:
+	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz
+
+distclean:	clean
+
+zip:
+	mv Makefile Makefile~; cp -p Makefile.in Makefile
+	rm -f test.c ztest*.c
+	v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
+	zip -ul9 zlib$$v $(DISTFILES)
+	mv Makefile~ Makefile
+
+dist:
+	mv Makefile Makefile~; cp -p Makefile.in Makefile
+	rm -f test.c ztest*.c
+	d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
+	rm -f $$d.tar.gz; \
+	if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \
+	files=""; \
+	for f in $(DISTFILES); do files="$$files $$d/$$f"; done; \
+	cd ..; \
+	GZIP=-9 $(TAR) chofz $$d/$$d.tar.gz $$files; \
+	if test ! -d $$d; then rm -f $$d; fi
+	mv Makefile~ Makefile
+
+tags:	
+	etags *.[ch]
+
+depend:
+	makedepend -- $(CFLAGS) -- *.[ch]
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzio.o: zutil.h zlib.h zconf.h
+infblock.o: infblock.h inftrees.h infcodes.h infutil.h zutil.h zlib.h zconf.h
+infcodes.o: zutil.h zlib.h zconf.h
+infcodes.o: inftrees.h infblock.h infcodes.h infutil.h inffast.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h
+inffast.o: infblock.h infcodes.h infutil.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h infblock.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
+minigzip.o:  zlib.h zconf.h 
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h  

os2/zlib.def

@@ -0,0 +1,51 @@
+;
+; Slightly modified version of ../nt/zlib.dnt :-)
+;
+
+LIBRARY		Z
+DESCRIPTION	"Zlib compression library for OS/2"
+CODE		PRELOAD MOVEABLE DISCARDABLE
+DATA		PRELOAD MOVEABLE MULTIPLE
+
+EXPORTS
+    adler32
+    compress
+    crc32
+    deflate
+    deflateCopy
+    deflateEnd
+    deflateInit2_
+    deflateInit_
+    deflateParams
+    deflateReset
+    deflateSetDictionary
+    gzclose
+    gzdopen
+    gzerror
+    gzflush
+    gzopen
+    gzread
+    gzwrite
+    inflate
+    inflateEnd
+    inflateInit2_
+    inflateInit_
+    inflateReset
+    inflateSetDictionary
+    inflateSync
+    uncompress
+    zlibVersion
+    gzprintf
+    gzputc
+    gzgetc
+    gzseek
+    gzrewind
+    gztell
+    gzeof
+    gzsetparams
+    zError
+    inflateSyncPoint
+    get_crc_table
+    compress2
+    gzputs
+    gzgets

trees.c

@@ -1,5 +1,5 @@
 /* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995-1996 Jean-loup Gailly
+ * Copyright (C) 1995-2002 Jean-loup Gailly
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
@@ -29,7 +29,9 @@
  *          Addison-Wesley, 1983. ISBN 0-201-06672-6.
  */
 
-/* $Id: trees.c,v 1.5 1995/05/03 17:27:12 jloup Exp $ */
+/* @(#) $Id$ */
+
+/* #define GEN_TREES_H */
 
 #include "deflate.h"
 
@@ -56,16 +58,16 @@
 #define REPZ_11_138  18
 /* repeat a zero length 11-138 times  (7 bits of repeat count) */
 
-local int extra_lbits[LENGTH_CODES] /* extra bits for each length code */
+local const int extra_lbits[LENGTH_CODES] /* extra bits for each length code */
    = {0,0,0,0,0,0,0,0,1,1,1,1,2,2,2,2,3,3,3,3,4,4,4,4,5,5,5,5,0};
 
-local int extra_dbits[D_CODES] /* extra bits for each distance code */
+local const int extra_dbits[D_CODES] /* extra bits for each distance code */
    = {0,0,0,0,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,12,12,13,13};
 
-local int extra_blbits[BL_CODES]/* extra bits for each bit length code */
+local const int extra_blbits[BL_CODES]/* extra bits for each bit length code */
    = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,2,3,7};
 
-local uch bl_order[BL_CODES]
+local const uch bl_order[BL_CODES]
    = {16,17,18,0,8,7,9,6,10,5,11,4,12,3,13,2,14,1,15};
 /* The lengths of the bit length codes are sent in order of decreasing
  * probability, to avoid transmitting the lengths for unused bit length codes.
@@ -80,6 +82,11 @@ local uch bl_order[BL_CODES]
  * Local data. These are initialized only once.
  */
 
+#define DIST_CODE_LEN  512 /* see definition of array dist_code below */
+
+#if defined(GEN_TREES_H) || !defined(STDC)
+/* non ANSI compilers may not accept trees.h */
+
 local ct_data static_ltree[L_CODES+2];
 /* The static literal tree. Since the bit lengths are imposed, there is no
  * need for the L_CODES extra codes used during heap construction. However
@@ -92,13 +99,13 @@ local ct_data static_dtree[D_CODES];
  * 5 bits.)
  */
 
-local uch dist_code[512];
-/* distance codes. The first 256 values correspond to the distances
+uch _dist_code[DIST_CODE_LEN];
+/* Distance codes. The first 256 values correspond to the distances
  * 3 .. 258, the last 256 values correspond to the top 8 bits of
  * the 15 bit distances.
  */
 
-local uch length_code[MAX_MATCH-MIN_MATCH+1];
+uch _length_code[MAX_MATCH-MIN_MATCH+1];
 /* length code for each normalized match length (0 == MIN_MATCH) */
 
 local int base_length[LENGTH_CODES];
@@ -107,9 +114,13 @@ local int base_length[LENGTH_CODES];
 local int base_dist[D_CODES];
 /* First normalized distance for each code (0 = distance of 1) */
 
+#else
+#  include "trees.h"
+#endif /* GEN_TREES_H */
+
 struct static_tree_desc_s {
-    ct_data *static_tree;        /* static tree or NULL */
-    intf    *extra_bits;         /* extra bits for each code or NULL */
+    const ct_data *static_tree;  /* static tree or NULL */
+    const intf *extra_bits;      /* extra bits for each code or NULL */
     int     extra_base;          /* base index for extra_bits */
     int     elems;               /* max number of elements in the tree */
     int     max_length;          /* max bit length for the codes */
@@ -122,7 +133,7 @@ local static_tree_desc  static_d_desc =
 {static_dtree, extra_dbits, 0,          D_CODES, MAX_BITS};
 
 local static_tree_desc  static_bl_desc =
-{(ct_data *)0, extra_blbits, 0,      BL_CODES, MAX_BL_BITS};
+{(const ct_data *)0, extra_blbits, 0,   BL_CODES, MAX_BL_BITS};
 
 /* ===========================================================================
  * Local (static) routines in this file.
@@ -148,23 +159,20 @@ local void bi_flush       OF((deflate_state *s));
 local void copy_block     OF((deflate_state *s, charf *buf, unsigned len,
                               int header));
 
+#ifdef GEN_TREES_H
+local void gen_trees_header OF((void));
+#endif
+
 #ifndef DEBUG
 #  define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len)
    /* Send a code of the given tree. c and tree must not have side effects */
 
 #else /* DEBUG */
 #  define send_code(s, c, tree) \
-     { if (verbose>1) fprintf(stderr,"\ncd %3d ",(c)); \
+     { if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \
        send_bits(s, tree[c].Code, tree[c].Len); }
 #endif
 
-#define d_code(dist) \
-   ((dist) < 256 ? dist_code[dist] : dist_code[256+((dist)>>7)])
-/* Mapping from a distance to a distance code. dist is the distance - 1 and
- * must not have side effects. dist_code[256] and dist_code[257] are never
- * used.
- */
-
 /* ===========================================================================
  * Output a short LSB first on the stream.
  * IN assertion: there is enough room in pendingBuf.
@@ -226,13 +234,12 @@ local void send_bits(s, value, length)
 /* the arguments must not have side effects */
 
 /* ===========================================================================
- * Initialize the various 'constant' tables. In a multi-threaded environment,
- * this function may be called by two threads concurrently, but this is
- * harmless since both invocations do exactly the same thing.
+ * Initialize the various 'constant' tables.
  */
 local void tr_static_init()
 {
-    static static_init_done = 0;
+#if defined(GEN_TREES_H) || !defined(STDC)
+    static int static_init_done = 0;
     int n;        /* iterates over tree elements */
     int bits;     /* bit counter */
     int length;   /* length value */
@@ -243,12 +250,19 @@ local void tr_static_init()
 
     if (static_init_done) return;
 
+    /* For some embedded targets, global variables are not initialized: */
+    static_l_desc.static_tree = static_ltree;
+    static_l_desc.extra_bits = extra_lbits;
+    static_d_desc.static_tree = static_dtree;
+    static_d_desc.extra_bits = extra_dbits;
+    static_bl_desc.extra_bits = extra_blbits;
+
     /* Initialize the mapping length (0..255) -> length code (0..28) */
     length = 0;
     for (code = 0; code < LENGTH_CODES-1; code++) {
         base_length[code] = length;
         for (n = 0; n < (1<<extra_lbits[code]); n++) {
-            length_code[length++] = (uch)code;
+            _length_code[length++] = (uch)code;
         }
     }
     Assert (length == 256, "tr_static_init: length != 256");
@@ -256,14 +270,14 @@ local void tr_static_init()
      * in two different ways: code 284 + 5 bits or code 285, so we
      * overwrite length_code[255] to use the best encoding:
      */
-    length_code[length-1] = (uch)code;
+    _length_code[length-1] = (uch)code;
 
     /* Initialize the mapping dist (0..32K) -> dist code (0..29) */
     dist = 0;
     for (code = 0 ; code < 16; code++) {
         base_dist[code] = dist;
         for (n = 0; n < (1<<extra_dbits[code]); n++) {
-            dist_code[dist++] = (uch)code;
+            _dist_code[dist++] = (uch)code;
         }
     }
     Assert (dist == 256, "tr_static_init: dist != 256");
@@ -271,7 +285,7 @@ local void tr_static_init()
     for ( ; code < D_CODES; code++) {
         base_dist[code] = dist << 7;
         for (n = 0; n < (1<<(extra_dbits[code]-7)); n++) {
-            dist_code[256 + dist++] = (uch)code;
+            _dist_code[256 + dist++] = (uch)code;
         }
     }
     Assert (dist == 256, "tr_static_init: 256+dist != 512");
@@ -295,8 +309,74 @@ local void tr_static_init()
         static_dtree[n].Code = bi_reverse((unsigned)n, 5);
     }
     static_init_done = 1;
+
+#  ifdef GEN_TREES_H
+    gen_trees_header();
+#  endif
+#endif /* defined(GEN_TREES_H) || !defined(STDC) */
 }
 
+/* ===========================================================================
+ * Genererate the file trees.h describing the static trees.
+ */
+#ifdef GEN_TREES_H
+#  ifndef DEBUG
+#    include <stdio.h>
+#  endif
+
+#  define SEPARATOR(i, last, width) \
+      ((i) == (last)? "\n};\n\n" :    \
+       ((i) % (width) == (width)-1 ? ",\n" : ", "))
+
+void gen_trees_header()
+{
+    FILE *header = fopen("trees.h", "w");
+    int i;
+
+    Assert (header != NULL, "Can't open trees.h");
+    fprintf(header,
+	    "/* header created automatically with -DGEN_TREES_H */\n\n");
+
+    fprintf(header, "local const ct_data static_ltree[L_CODES+2] = {\n");
+    for (i = 0; i < L_CODES+2; i++) {
+	fprintf(header, "{{%3u},{%3u}}%s", static_ltree[i].Code,
+		static_ltree[i].Len, SEPARATOR(i, L_CODES+1, 5));
+    }
+
+    fprintf(header, "local const ct_data static_dtree[D_CODES] = {\n");
+    for (i = 0; i < D_CODES; i++) {
+	fprintf(header, "{{%2u},{%2u}}%s", static_dtree[i].Code,
+		static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5));
+    }
+
+    fprintf(header, "const uch _dist_code[DIST_CODE_LEN] = {\n");
+    for (i = 0; i < DIST_CODE_LEN; i++) {
+	fprintf(header, "%2u%s", _dist_code[i],
+		SEPARATOR(i, DIST_CODE_LEN-1, 20));
+    }
+
+    fprintf(header, "const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
+    for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) {
+	fprintf(header, "%2u%s", _length_code[i],
+		SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20));
+    }
+
+    fprintf(header, "local const int base_length[LENGTH_CODES] = {\n");
+    for (i = 0; i < LENGTH_CODES; i++) {
+	fprintf(header, "%1u%s", base_length[i],
+		SEPARATOR(i, LENGTH_CODES-1, 20));
+    }
+
+    fprintf(header, "local const int base_dist[D_CODES] = {\n");
+    for (i = 0; i < D_CODES; i++) {
+	fprintf(header, "%5u%s", base_dist[i],
+		SEPARATOR(i, D_CODES-1, 10));
+    }
+
+    fclose(header);
+}
+#endif /* GEN_TREES_H */
+
 /* ===========================================================================
  * Initialize the tree data structures for a new zlib stream.
  */
@@ -305,8 +385,6 @@ void _tr_init(s)
 {
     tr_static_init();
 
-    s->compressed_len = 0L;
-
     s->l_desc.dyn_tree = s->dyn_ltree;
     s->l_desc.stat_desc = &static_l_desc;
 
@@ -320,6 +398,7 @@ void _tr_init(s)
     s->bi_valid = 0;
     s->last_eob_len = 8; /* enough lookahead for inflate */
 #ifdef DEBUG
+    s->compressed_len = 0L;
     s->bits_sent = 0L;
 #endif
 
@@ -413,12 +492,12 @@ local void gen_bitlen(s, desc)
     deflate_state *s;
     tree_desc *desc;    /* the tree descriptor */
 {
-    ct_data *tree  = desc->dyn_tree;
-    int max_code   = desc->max_code;
-    ct_data *stree = desc->stat_desc->static_tree;
-    intf *extra    = desc->stat_desc->extra_bits;
-    int base       = desc->stat_desc->extra_base;
-    int max_length = desc->stat_desc->max_length;
+    ct_data *tree        = desc->dyn_tree;
+    int max_code         = desc->max_code;
+    const ct_data *stree = desc->stat_desc->static_tree;
+    const intf *extra    = desc->stat_desc->extra_bits;
+    int base             = desc->stat_desc->extra_base;
+    int max_length       = desc->stat_desc->max_length;
     int h;              /* heap index */
     int n, m;           /* iterate over the tree elements */
     int bits;           /* bit length */
@@ -542,9 +621,9 @@ local void build_tree(s, desc)
     deflate_state *s;
     tree_desc *desc; /* the tree descriptor */
 {
-    ct_data *tree   = desc->dyn_tree;
-    ct_data *stree  = desc->stat_desc->static_tree;
-    int elems       = desc->stat_desc->elems;
+    ct_data *tree         = desc->dyn_tree;
+    const ct_data *stree  = desc->stat_desc->static_tree;
+    int elems             = desc->stat_desc->elems;
     int n, m;          /* iterate over heap elements */
     int max_code = -1; /* largest code with non zero frequency */
     int node;          /* new node being created */
@@ -792,9 +871,10 @@ void _tr_stored_block(s, buf, stored_len, eof)
     int eof;          /* true if this is the last block for a file */
 {
     send_bits(s, (STORED_BLOCK<<1)+eof, 3);  /* send block type */
+#ifdef DEBUG
     s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L;
     s->compressed_len += (stored_len + 4) << 3;
-
+#endif
     copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
 }
 
@@ -814,7 +894,9 @@ void _tr_align(s)
 {
     send_bits(s, STATIC_TREES<<1, 3);
     send_code(s, END_BLOCK, static_ltree);
+#ifdef DEBUG
     s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
+#endif
     bi_flush(s);
     /* Of the 10 bits for the empty block, we have already sent
      * (10 - bi_valid) bits. The lookahead for the last real code (before
@@ -824,7 +906,9 @@ void _tr_align(s)
     if (1 + s->last_eob_len + 10 - s->bi_valid < 9) {
         send_bits(s, STATIC_TREES<<1, 3);
         send_code(s, END_BLOCK, static_ltree);
+#ifdef DEBUG
         s->compressed_len += 10L;
+#endif
         bi_flush(s);
     }
     s->last_eob_len = 7;
@@ -832,10 +916,9 @@ void _tr_align(s)
 
 /* ===========================================================================
  * Determine the best encoding for the current block: dynamic trees, static
- * trees or store, and output the encoded block to the zip file. This function
- * returns the total compressed length for the file so far.
+ * trees or store, and output the encoded block to the zip file.
  */
-ulg _tr_flush_block(s, buf, stored_len, eof)
+void _tr_flush_block(s, buf, stored_len, eof)
     deflate_state *s;
     charf *buf;       /* input block, or NULL if too old */
     ulg stored_len;   /* length of input block */
@@ -882,25 +965,6 @@ ulg _tr_flush_block(s, buf, stored_len, eof)
 	opt_lenb = static_lenb = stored_len + 5; /* force a stored block */
     }
 
-    /* If compression failed and this is the first and last block,
-     * and if the .zip file can be seeked (to rewrite the local header),
-     * the whole file is transformed into a stored file:
-     */
-#ifdef STORED_FILE_OK
-#  ifdef FORCE_STORED_FILE
-    if (eof && s->compressed_len == 0L) { /* force stored file */
-#  else
-    if (stored_len <= opt_lenb && eof && s->compressed_len==0L && seekable()) {
-#  endif
-        /* Since LIT_BUFSIZE <= 2*WSIZE, the input data must be there: */
-        if (buf == (charf*)0) error ("block vanished");
-
-        copy_block(buf, (unsigned)stored_len, 0); /* without header */
-        s->compressed_len = stored_len << 3;
-        s->method = STORED;
-    } else
-#endif /* STORED_FILE_OK */
-
 #ifdef FORCE_STORED
     if (buf != (char*)0) { /* force stored block */
 #else
@@ -922,25 +986,32 @@ ulg _tr_flush_block(s, buf, stored_len, eof)
 #endif
         send_bits(s, (STATIC_TREES<<1)+eof, 3);
         compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree);
+#ifdef DEBUG
         s->compressed_len += 3 + s->static_len;
+#endif
     } else {
         send_bits(s, (DYN_TREES<<1)+eof, 3);
         send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1,
                        max_blindex+1);
         compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree);
+#ifdef DEBUG
         s->compressed_len += 3 + s->opt_len;
+#endif
     }
     Assert (s->compressed_len == s->bits_sent, "bad compressed size");
+    /* The above check is made mod 2^32, for files larger than 512 MB
+     * and uLong implemented on 32 bits.
+     */
     init_block(s);
 
     if (eof) {
         bi_windup(s);
+#ifdef DEBUG
         s->compressed_len += 7;  /* align on byte boundary */
+#endif
     }
     Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3,
            s->compressed_len-7*eof));
-
-    return s->compressed_len >> 3;
 }
 
 /* ===========================================================================
@@ -965,12 +1036,13 @@ int _tr_tally (s, dist, lc)
                (ush)lc <= (ush)(MAX_MATCH-MIN_MATCH) &&
                (ush)d_code(dist) < (ush)D_CODES,  "_tr_tally: bad match");
 
-        s->dyn_ltree[length_code[lc]+LITERALS+1].Freq++;
+        s->dyn_ltree[_length_code[lc]+LITERALS+1].Freq++;
         s->dyn_dtree[d_code(dist)].Freq++;
     }
 
+#ifdef TRUNCATE_BLOCK
     /* Try to guess if it is profitable to stop the current block here */
-    if (s->level > 2 && (s->last_lit & 0xfff) == 0) {
+    if ((s->last_lit & 0x1fff) == 0 && s->level > 2) {
         /* Compute an upper bound for the compressed length */
         ulg out_length = (ulg)s->last_lit*8L;
         ulg in_length = (ulg)((long)s->strstart - s->block_start);
@@ -985,6 +1057,7 @@ int _tr_tally (s, dist, lc)
                100L - out_length*100L/in_length));
         if (s->matches < s->last_lit/2 && out_length < in_length/2) return 1;
     }
+#endif
     return (s->last_lit == s->lit_bufsize-1);
     /* We avoid equality with lit_bufsize because of wraparound at 64K
      * on 16 bit machines and because stored blocks are restricted to
@@ -1014,7 +1087,7 @@ local void compress_block(s, ltree, dtree)
             Tracecv(isgraph(lc), (stderr," '%c' ", lc));
         } else {
             /* Here, lc is the match length - MIN_MATCH */
-            code = length_code[lc];
+            code = _length_code[lc];
             send_code(s, code+LITERALS+1, ltree); /* send the length code */
             extra = extra_lbits[code];
             if (extra != 0) {

trees.h

@@ -0,0 +1,128 @@
+/* header created automatically with -DGEN_TREES_H */
+
+local const ct_data static_ltree[L_CODES+2] = {
+{{ 12},{  8}}, {{140},{  8}}, {{ 76},{  8}}, {{204},{  8}}, {{ 44},{  8}},
+{{172},{  8}}, {{108},{  8}}, {{236},{  8}}, {{ 28},{  8}}, {{156},{  8}},
+{{ 92},{  8}}, {{220},{  8}}, {{ 60},{  8}}, {{188},{  8}}, {{124},{  8}},
+{{252},{  8}}, {{  2},{  8}}, {{130},{  8}}, {{ 66},{  8}}, {{194},{  8}},
+{{ 34},{  8}}, {{162},{  8}}, {{ 98},{  8}}, {{226},{  8}}, {{ 18},{  8}},
+{{146},{  8}}, {{ 82},{  8}}, {{210},{  8}}, {{ 50},{  8}}, {{178},{  8}},
+{{114},{  8}}, {{242},{  8}}, {{ 10},{  8}}, {{138},{  8}}, {{ 74},{  8}},
+{{202},{  8}}, {{ 42},{  8}}, {{170},{  8}}, {{106},{  8}}, {{234},{  8}},
+{{ 26},{  8}}, {{154},{  8}}, {{ 90},{  8}}, {{218},{  8}}, {{ 58},{  8}},
+{{186},{  8}}, {{122},{  8}}, {{250},{  8}}, {{  6},{  8}}, {{134},{  8}},
+{{ 70},{  8}}, {{198},{  8}}, {{ 38},{  8}}, {{166},{  8}}, {{102},{  8}},
+{{230},{  8}}, {{ 22},{  8}}, {{150},{  8}}, {{ 86},{  8}}, {{214},{  8}},
+{{ 54},{  8}}, {{182},{  8}}, {{118},{  8}}, {{246},{  8}}, {{ 14},{  8}},
+{{142},{  8}}, {{ 78},{  8}}, {{206},{  8}}, {{ 46},{  8}}, {{174},{  8}},
+{{110},{  8}}, {{238},{  8}}, {{ 30},{  8}}, {{158},{  8}}, {{ 94},{  8}},
+{{222},{  8}}, {{ 62},{  8}}, {{190},{  8}}, {{126},{  8}}, {{254},{  8}},
+{{  1},{  8}}, {{129},{  8}}, {{ 65},{  8}}, {{193},{  8}}, {{ 33},{  8}},
+{{161},{  8}}, {{ 97},{  8}}, {{225},{  8}}, {{ 17},{  8}}, {{145},{  8}},
+{{ 81},{  8}}, {{209},{  8}}, {{ 49},{  8}}, {{177},{  8}}, {{113},{  8}},
+{{241},{  8}}, {{  9},{  8}}, {{137},{  8}}, {{ 73},{  8}}, {{201},{  8}},
+{{ 41},{  8}}, {{169},{  8}}, {{105},{  8}}, {{233},{  8}}, {{ 25},{  8}},
+{{153},{  8}}, {{ 89},{  8}}, {{217},{  8}}, {{ 57},{  8}}, {{185},{  8}},
+{{121},{  8}}, {{249},{  8}}, {{  5},{  8}}, {{133},{  8}}, {{ 69},{  8}},
+{{197},{  8}}, {{ 37},{  8}}, {{165},{  8}}, {{101},{  8}}, {{229},{  8}},
+{{ 21},{  8}}, {{149},{  8}}, {{ 85},{  8}}, {{213},{  8}}, {{ 53},{  8}},
+{{181},{  8}}, {{117},{  8}}, {{245},{  8}}, {{ 13},{  8}}, {{141},{  8}},
+{{ 77},{  8}}, {{205},{  8}}, {{ 45},{  8}}, {{173},{  8}}, {{109},{  8}},
+{{237},{  8}}, {{ 29},{  8}}, {{157},{  8}}, {{ 93},{  8}}, {{221},{  8}},
+{{ 61},{  8}}, {{189},{  8}}, {{125},{  8}}, {{253},{  8}}, {{ 19},{  9}},
+{{275},{  9}}, {{147},{  9}}, {{403},{  9}}, {{ 83},{  9}}, {{339},{  9}},
+{{211},{  9}}, {{467},{  9}}, {{ 51},{  9}}, {{307},{  9}}, {{179},{  9}},
+{{435},{  9}}, {{115},{  9}}, {{371},{  9}}, {{243},{  9}}, {{499},{  9}},
+{{ 11},{  9}}, {{267},{  9}}, {{139},{  9}}, {{395},{  9}}, {{ 75},{  9}},
+{{331},{  9}}, {{203},{  9}}, {{459},{  9}}, {{ 43},{  9}}, {{299},{  9}},
+{{171},{  9}}, {{427},{  9}}, {{107},{  9}}, {{363},{  9}}, {{235},{  9}},
+{{491},{  9}}, {{ 27},{  9}}, {{283},{  9}}, {{155},{  9}}, {{411},{  9}},
+{{ 91},{  9}}, {{347},{  9}}, {{219},{  9}}, {{475},{  9}}, {{ 59},{  9}},
+{{315},{  9}}, {{187},{  9}}, {{443},{  9}}, {{123},{  9}}, {{379},{  9}},
+{{251},{  9}}, {{507},{  9}}, {{  7},{  9}}, {{263},{  9}}, {{135},{  9}},
+{{391},{  9}}, {{ 71},{  9}}, {{327},{  9}}, {{199},{  9}}, {{455},{  9}},
+{{ 39},{  9}}, {{295},{  9}}, {{167},{  9}}, {{423},{  9}}, {{103},{  9}},
+{{359},{  9}}, {{231},{  9}}, {{487},{  9}}, {{ 23},{  9}}, {{279},{  9}},
+{{151},{  9}}, {{407},{  9}}, {{ 87},{  9}}, {{343},{  9}}, {{215},{  9}},
+{{471},{  9}}, {{ 55},{  9}}, {{311},{  9}}, {{183},{  9}}, {{439},{  9}},
+{{119},{  9}}, {{375},{  9}}, {{247},{  9}}, {{503},{  9}}, {{ 15},{  9}},
+{{271},{  9}}, {{143},{  9}}, {{399},{  9}}, {{ 79},{  9}}, {{335},{  9}},
+{{207},{  9}}, {{463},{  9}}, {{ 47},{  9}}, {{303},{  9}}, {{175},{  9}},
+{{431},{  9}}, {{111},{  9}}, {{367},{  9}}, {{239},{  9}}, {{495},{  9}},
+{{ 31},{  9}}, {{287},{  9}}, {{159},{  9}}, {{415},{  9}}, {{ 95},{  9}},
+{{351},{  9}}, {{223},{  9}}, {{479},{  9}}, {{ 63},{  9}}, {{319},{  9}},
+{{191},{  9}}, {{447},{  9}}, {{127},{  9}}, {{383},{  9}}, {{255},{  9}},
+{{511},{  9}}, {{  0},{  7}}, {{ 64},{  7}}, {{ 32},{  7}}, {{ 96},{  7}},
+{{ 16},{  7}}, {{ 80},{  7}}, {{ 48},{  7}}, {{112},{  7}}, {{  8},{  7}},
+{{ 72},{  7}}, {{ 40},{  7}}, {{104},{  7}}, {{ 24},{  7}}, {{ 88},{  7}},
+{{ 56},{  7}}, {{120},{  7}}, {{  4},{  7}}, {{ 68},{  7}}, {{ 36},{  7}},
+{{100},{  7}}, {{ 20},{  7}}, {{ 84},{  7}}, {{ 52},{  7}}, {{116},{  7}},
+{{  3},{  8}}, {{131},{  8}}, {{ 67},{  8}}, {{195},{  8}}, {{ 35},{  8}},
+{{163},{  8}}, {{ 99},{  8}}, {{227},{  8}}
+};
+
+local const ct_data static_dtree[D_CODES] = {
+{{ 0},{ 5}}, {{16},{ 5}}, {{ 8},{ 5}}, {{24},{ 5}}, {{ 4},{ 5}},
+{{20},{ 5}}, {{12},{ 5}}, {{28},{ 5}}, {{ 2},{ 5}}, {{18},{ 5}},
+{{10},{ 5}}, {{26},{ 5}}, {{ 6},{ 5}}, {{22},{ 5}}, {{14},{ 5}},
+{{30},{ 5}}, {{ 1},{ 5}}, {{17},{ 5}}, {{ 9},{ 5}}, {{25},{ 5}},
+{{ 5},{ 5}}, {{21},{ 5}}, {{13},{ 5}}, {{29},{ 5}}, {{ 3},{ 5}},
+{{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}}
+};
+
+const uch _dist_code[DIST_CODE_LEN] = {
+ 0,  1,  2,  3,  4,  4,  5,  5,  6,  6,  6,  6,  7,  7,  7,  7,  8,  8,  8,  8,
+ 8,  8,  8,  8,  9,  9,  9,  9,  9,  9,  9,  9, 10, 10, 10, 10, 10, 10, 10, 10,
+10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
+11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12,
+12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13, 13, 13,
+13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, 13,
+13, 13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 14, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,
+15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15, 15,  0,  0, 16, 17,
+18, 18, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 22, 22, 22, 22, 22, 22, 22, 22,
+23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28, 28,
+28, 28, 28, 28, 28, 28, 28, 28, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
+29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29
+};
+
+const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {
+ 0,  1,  2,  3,  4,  5,  6,  7,  8,  8,  9,  9, 10, 10, 11, 11, 12, 12, 12, 12,
+13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16,
+17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19,
+19, 19, 19, 19, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20, 20,
+21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22, 22,
+22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23,
+23, 23, 23, 23, 23, 23, 23, 23, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24, 24,
+25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25,
+25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26, 26,
+26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27,
+27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 28
+};
+
+local const int base_length[LENGTH_CODES] = {
+0, 1, 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 20, 24, 28, 32, 40, 48, 56,
+64, 80, 96, 112, 128, 160, 192, 224, 0
+};
+
+local const int base_dist[D_CODES] = {
+    0,     1,     2,     3,     4,     6,     8,    12,    16,    24,
+   32,    48,    64,    96,   128,   192,   256,   384,   512,   768,
+ 1024,  1536,  2048,  3072,  4096,  6144,  8192, 12288, 16384, 24576
+};
+

uncompr.c

@@ -1,9 +1,9 @@
 /* uncompr.c -- decompress a memory buffer
- * Copyright (C) 1995-1996 Jean-loup Gailly.
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
-/* $Id: uncompr.c,v 1.5 1995/05/03 17:27:12 jloup Exp $ */
+/* @(#) $Id$ */
 
 #include "zlib.h"
 
@@ -22,7 +22,7 @@
    enough memory, Z_BUF_ERROR if there was not enough room in the output
    buffer, or Z_DATA_ERROR if the input data was corrupted.
 */
-int uncompress (dest, destLen, source, sourceLen)
+int ZEXPORT uncompress (dest, destLen, source, sourceLen)
     Bytef *dest;
     uLongf *destLen;
     const Bytef *source;
@@ -49,7 +49,7 @@ int uncompress (dest, destLen, source, sourceLen)
     err = inflate(&stream, Z_FINISH);
     if (err != Z_STREAM_END) {
         inflateEnd(&stream);
-        return err;
+        return err == Z_OK ? Z_BUF_ERROR : err;
     }
     *destLen = stream.total_out;
 

zconf.h

@@ -1,16 +1,16 @@
 /* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-1996 Jean-loup Gailly.
+ * Copyright (C) 1995-2002 Jean-loup Gailly.
  * For conditions of distribution and use, see copyright notice in zlib.h 
  */
 
-/* $Id: zconf.h,v 1.12 1995/05/03 17:27:12 jloup Exp $ */
+/* @(#) $Id$ */
 
 #ifndef _ZCONF_H
 #define _ZCONF_H
 
 /*
- * People prefering a unique prefix for all types and library functions
- * should compile with -DZ_PREFIX
+ * If you *really* need a unique prefix for all types and library functions,
+ * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
  */
 #ifdef Z_PREFIX
 #  define deflateInit_	z_deflateInit_
@@ -20,13 +20,17 @@
 #  define inflate	z_inflate
 #  define inflateEnd	z_inflateEnd
 #  define deflateInit2_	z_deflateInit2_
+#  define deflateSetDictionary z_deflateSetDictionary
 #  define deflateCopy	z_deflateCopy
 #  define deflateReset	z_deflateReset
 #  define deflateParams	z_deflateParams
 #  define inflateInit2_	z_inflateInit2_
+#  define inflateSetDictionary z_inflateSetDictionary
 #  define inflateSync	z_inflateSync
+#  define inflateSyncPoint z_inflateSyncPoint
 #  define inflateReset	z_inflateReset
 #  define compress	z_compress
+#  define compress2	z_compress2
 #  define uncompress	z_uncompress
 #  define adler32	z_adler32
 #  define crc32		z_crc32
@@ -35,7 +39,7 @@
 #  define Byte		z_Byte
 #  define uInt		z_uInt
 #  define uLong		z_uLong
-#  define Bytef		z_Bytef
+#  define Bytef	        z_Bytef
 #  define charf		z_charf
 #  define intf		z_intf
 #  define uIntf		z_uIntf
@@ -47,8 +51,10 @@
 #if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32)
 #  define WIN32
 #endif
-#if (defined(__GNUC__) || defined(WIN32)) && !defined(__32BIT__)
-#  define __32BIT__
+#if defined(__GNUC__) || defined(WIN32) || defined(__386__) || defined(i386)
+#  ifndef __32BIT__
+#    define __32BIT__
+#  endif
 #endif
 #if defined(__MSDOS__) && !defined(MSDOS)
 #  define MSDOS
@@ -68,19 +74,29 @@
 #if (defined(MSDOS) || defined(_WINDOWS) || defined(WIN32))  && !defined(STDC)
 #  define STDC
 #endif
-#if (defined(__STDC__) || defined(__cplusplus)) && !defined(STDC)
-#  define STDC
+#if defined(__STDC__) || defined(__cplusplus) || defined(__OS2__)
+#  ifndef STDC
+#    define STDC
+#  endif
 #endif
 
-#if !defined(STDC) && !defined(const)
-#  define const
+#ifndef STDC
+#  ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
+#    define const
+#  endif
 #endif
 
-#ifdef	__MWERKS__ /* Metrowerks CodeWarrior declares fileno() in unix.h */
-#  include <unix.h>
-#  define Byte _Byte /* Byte already used on Mac */
+/* Some Mac compilers merge all .h files incorrectly: */
+#if defined(__MWERKS__) || defined(applec) ||defined(THINK_C) ||defined(__SC__)
+#  define NO_DUMMY_DECL
 #endif
 
+/* Old Borland C incorrectly complains about missing returns: */
+#if defined(__BORLANDC__) && (__BORLANDC__ < 0x500)
+#  define NEED_DUMMY_RETURN
+#endif
+
+
 /* Maximum value for memLevel in deflateInit2 */
 #ifndef MAX_MEM_LEVEL
 #  ifdef MAXSEG_64K
@@ -90,13 +106,17 @@
 #  endif
 #endif
 
-/* Maximum value for windowBits in deflateInit2 and inflateInit2 */
+/* Maximum value for windowBits in deflateInit2 and inflateInit2.
+ * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files
+ * created by gzip. (Files created by minigzip can still be extracted by
+ * gzip.)
+ */
 #ifndef MAX_WBITS
 #  define MAX_WBITS   15 /* 32K LZ77 window */
 #endif
 
 /* The memory requirements for deflate are (in bytes):
-            1 << (windowBits+2)   +  1 << (memLevel+9)
+            (1 << (windowBits+2)) +  (1 << (memLevel+9))
  that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
  plus a few kilobytes for small objects. For example, if you want to reduce
  the default memory requirements from 256K to 128K, compile with
@@ -124,32 +144,84 @@
  * to define NO_MEMCPY in zutil.h.  If you don't need the mixed model,
  * just define FAR to be empty.
  */
-#if defined(M_I86SM) || defined(M_I86MM) /* MSC small or medium model */
+#if (defined(M_I86SM) || defined(M_I86MM)) && !defined(__32BIT__)
+   /* MSC small or medium model */
 #  define SMALL_MEDIUM
 #  ifdef _MSC_VER
-#    define FAR __far
+#    define FAR _far
 #  else
 #    define FAR far
 #  endif
 #endif
 #if defined(__BORLANDC__) && (defined(__SMALL__) || defined(__MEDIUM__))
+#  ifndef __32BIT__
 #    define SMALL_MEDIUM
-#    define FAR __far
+#    define FAR _far
+#  endif
 #endif
+
+/* Compile with -DZLIB_DLL for Windows DLL support */
+#if defined(ZLIB_DLL)
+#  if defined(_WINDOWS) || defined(WINDOWS)
+#    ifdef FAR
+#      undef FAR
+#    endif
+#    include <windows.h>
+#    define ZEXPORT  WINAPI
+#    ifdef WIN32
+#      define ZEXPORTVA  WINAPIV
+#    else
+#      define ZEXPORTVA  FAR _cdecl _export
+#    endif
+#  endif
+#  if defined (__BORLANDC__)
+#    if (__BORLANDC__ >= 0x0500) && defined (WIN32)
+#      include <windows.h>
+#      define ZEXPORT __declspec(dllexport) WINAPI
+#      define ZEXPORTRVA __declspec(dllexport) WINAPIV
+#    else
+#      if defined (_Windows) && defined (__DLL__)
+#        define ZEXPORT _export
+#        define ZEXPORTVA _export
+#      endif
+#    endif
+#  endif
+#endif
+
+#if defined (__BEOS__)
+#  if defined (ZLIB_DLL)
+#    define ZEXTERN extern __declspec(dllexport)
+#  else
+#    define ZEXTERN extern __declspec(dllimport)
+#  endif
+#endif
+
+#ifndef ZEXPORT
+#  define ZEXPORT
+#endif
+#ifndef ZEXPORTVA
+#  define ZEXPORTVA
+#endif
+#ifndef ZEXTERN
+#  define ZEXTERN extern
+#endif
+
 #ifndef FAR
 #   define FAR
 #endif
-/* The Watcom compiler defines M_I86SM and __SMALL__ even in 32 bit mode */
-#if defined(__WATCOMC__) && defined(__386__)
-#  undef FAR
-#  undef SMALL_MEDIUM
-#endif
 
+#if !defined(MACOS) && !defined(TARGET_OS_MAC)
 typedef unsigned char  Byte;  /* 8 bits */
+#endif
 typedef unsigned int   uInt;  /* 16 bits or more */
 typedef unsigned long  uLong; /* 32 bits or more */
 
-typedef Byte  FAR Bytef;
+#ifdef SMALL_MEDIUM
+   /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
+#  define Bytef Byte FAR
+#else
+   typedef Byte  FAR Bytef;
+#endif
 typedef char  FAR charf;
 typedef int   FAR intf;
 typedef uInt  FAR uIntf;
@@ -163,4 +235,45 @@ typedef uLong FAR uLongf;
    typedef Byte     *voidp;
 #endif
 
+#ifdef HAVE_UNISTD_H
+#  include <sys/types.h> /* for off_t */
+#  include <unistd.h>    /* for SEEK_* and off_t */
+#  define z_off_t  off_t
+#endif
+#ifndef SEEK_SET
+#  define SEEK_SET        0       /* Seek from beginning of file.  */
+#  define SEEK_CUR        1       /* Seek from current position.  */
+#  define SEEK_END        2       /* Set file pointer to EOF plus "offset" */
+#endif
+#ifndef z_off_t
+#  define  z_off_t long
+#endif
+
+/* MVS linker does not support external names larger than 8 bytes */
+#if defined(__MVS__)
+#   pragma map(deflateInit_,"DEIN")
+#   pragma map(deflateInit2_,"DEIN2")
+#   pragma map(deflateEnd,"DEEND")
+#   pragma map(inflateInit_,"ININ")
+#   pragma map(inflateInit2_,"ININ2")
+#   pragma map(inflateEnd,"INEND")
+#   pragma map(inflateSync,"INSY")
+#   pragma map(inflateSetDictionary,"INSEDI")
+#   pragma map(inflate_blocks,"INBL")
+#   pragma map(inflate_blocks_new,"INBLNE")
+#   pragma map(inflate_blocks_free,"INBLFR")
+#   pragma map(inflate_blocks_reset,"INBLRE")
+#   pragma map(inflate_codes_free,"INCOFR")
+#   pragma map(inflate_codes,"INCO")
+#   pragma map(inflate_fast,"INFA")
+#   pragma map(inflate_flush,"INFLU")
+#   pragma map(inflate_mask,"INMA")
+#   pragma map(inflate_set_dictionary,"INSEDI2")
+#   pragma map(inflate_copyright,"INCOPY")
+#   pragma map(inflate_trees_bits,"INTRBI")
+#   pragma map(inflate_trees_dynamic,"INTRDY")
+#   pragma map(inflate_trees_fixed,"INTRFI")
+#   pragma map(inflate_trees_free,"INTRFR")
+#endif
+
 #endif /* _ZCONF_H */

zlib.3

@@ -0,0 +1,107 @@
+.TH ZLIB 3 "11 March 2002"
+.SH NAME
+zlib \- compression/decompression library
+.SH SYNOPSIS
+[see
+.I zlib.h
+for full description]
+.SH DESCRIPTION
+The
+.I zlib
+library is a general purpose data compression library.
+The code is thread safe.
+It provides in-memory compression and decompression functions,
+including integrity checks of the uncompressed data.
+This version of the library supports only one compression method (deflation)
+but other algorithms will be added later and will have the same stream interface.
+.LP
+Compression can be done in a single step if the buffers are large enough
+(for example if an input file is mmap'ed),
+or can be done by repeated calls of the compression function.
+In the latter case,
+the application must provide more input and/or consume the output
+(providing more output space) before each call.
+.LP
+The library also supports reading and writing files in
+.I gzip
+(.gz) format
+with an interface similar to that of stdio.
+.LP
+The library does not install any signal handler. The decoder checks
+the consistency of the compressed data, so the library should never
+crash even in case of corrupted input.
+.LP
+All functions of the compression library are documented in the file
+.IR zlib.h.
+The distribution source includes examples of use of the library
+the files
+.I example.c
+and
+.IR minigzip.c .
+.LP
+A Java implementation of
+.IR zlib
+is available in the Java Development Kit 1.1
+.IP
+http://www.javasoft.com/products/JDK/1.1/docs/api/Package-java.util.zip.html
+.LP
+A Perl interface to
+.IR zlib ,
+written by Paul Marquess (pmarquess@bfsec.bt.co.uk)
+is available at CPAN (Comprehensive Perl Archive Network) sites,
+such as:
+.IP
+ftp://ftp.cis.ufl.edu/pub/perl/CPAN/modules/by-module/Compress/Compress-Zlib*
+.LP
+A Python interface to
+.IR zlib
+written by A.M. Kuchling <amk@magnet.com>
+is available from the Python Software Association sites, such as:
+.IP
+ftp://ftp.python.org/pub/python/contrib/Encoding/zlib*.tar.gz
+.SH "SEE ALSO"
+Questions about zlib should be sent to:
+.IP
+zlib@quest.jpl.nasa.gov
+or, if this fails, to the author addresses given below.
+The zlib home page is:
+.IP
+http://www.cdrom.com/pub/infozip/zlib/
+.LP
+The data format used by the zlib library is described by RFC
+(Request for Comments) 1950 to 1952 in the files: 
+.IP
+ftp://ds.internic.net/rfc/rfc1950.txt (zlib format)
+.br
+rfc1951.txt (deflate format)
+.br
+rfc1952.txt (gzip format)
+.LP
+These documents are also available in other formats from:
+.IP
+ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
+.SH AUTHORS
+Version 1.1.4
+Copyright (C) 1995-2002 Jean-loup Gailly (jloup@gzip.org)
+and Mark Adler (madler@alumni.caltech.edu).
+.LP
+This software is provided "as-is,"
+without any express or implied warranty.
+In no event will the authors be held liable for any damages
+arising from the use of this software.
+See the distribution directory with respect to requirements
+governing redistribution.
+The deflate format used by
+.I zlib
+was defined by Phil Katz.
+The deflate and
+.I zlib
+specifications were written by L. Peter Deutsch.
+Thanks to all the people who reported problems and suggested various
+improvements in
+.IR zlib ;
+who are too numerous to cite here.
+.LP
+UNIX manual page by R. P. C. Rodgers,
+U.S. National Library of Medicine (rodgers@nlm.nih.gov).
+.\" end of man page

zlib.h

@@ -1,7 +1,7 @@
 /* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 1.0, Jan 27th, 1996.
+  version 1.1.4, March 11th, 2002
 
-  Copyright (C) 1995-1996 Jean-loup Gailly and Mark Adler
+  Copyright (C) 1995-2002 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
@@ -20,42 +20,44 @@
   3. This notice may not be removed or altered from any source distribution.
 
   Jean-loup Gailly        Mark Adler
-  gzip@prep.ai.mit.edu    madler@alumni.caltech.edu
- */
+  jloup@gzip.org          madler@alumni.caltech.edu
+
+
+  The data format used by the zlib library is described by RFCs (Request for
+  Comments) 1950 to 1952 in the files ftp://ds.internic.net/rfc/rfc1950.txt
+  (zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).
+*/
 
 #ifndef _ZLIB_H
 #define _ZLIB_H
 
+#include "zconf.h"
+
 #ifdef __cplusplus
 extern "C" {
 #endif
 
-#include "zconf.h"
-
-#define ZLIB_VERSION "1.0"
+#define ZLIB_VERSION "1.1.4"
 
 /* 
      The 'zlib' compression library provides in-memory compression and
   decompression functions, including integrity checks of the uncompressed
   data.  This version of the library supports only one compression method
-  (deflation) but other algorithms may be added later and will have the same
+  (deflation) but other algorithms will be added later and will have the same
   stream interface.
 
-     For compression the application must provide the output buffer and
-  may optionally provide the input buffer for optimization. For decompression,
-  the application must provide the input buffer and may optionally provide
-  the output buffer for optimization.
-
      Compression can be done in a single step if the buffers are large
   enough (for example if an input file is mmap'ed), or can be done by
   repeated calls of the compression function.  In the latter case, the
   application must provide more input and/or consume the output
   (providing more output space) before each call.
 
-     The library does not install any signal handler. It is recommended to
-  add at least a handler for SIGSEGV when decompressing; the library checks
-  the consistency of the input data whenever possible but may go nuts
-  for some forms of corrupted input.
+     The library also supports reading and writing files in gzip (.gz) format
+  with an interface similar to that of stdio.
+
+     The library does not install any signal handler. The decoder checks
+  the consistency of the compressed data, so the library should never
+  crash even in case of corrupted input.
 */
 
 typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
@@ -84,6 +86,8 @@ typedef struct z_stream_s {
     uLong   reserved;   /* reserved for future use */
 } z_stream;
 
+typedef z_stream FAR *z_streamp;
+
 /*
    The application must update next_in and avail_in when avail_in has
    dropped to zero. It must update next_out and avail_out when avail_out
@@ -97,6 +101,9 @@ typedef struct z_stream_s {
    opaque value.
 
    zalloc must return Z_NULL if there is not enough memory for the object.
+   If zlib is used in a multi-threaded application, zalloc and zfree must be
+   thread safe.
+
    On 16-bit systems, the functions zalloc and zfree must be able to allocate
    exactly 65536 bytes, but will not be required to allocate more than this
    if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
@@ -116,7 +123,7 @@ typedef struct z_stream_s {
                         /* constants */
 
 #define Z_NO_FLUSH      0
-#define Z_PARTIAL_FLUSH 1
+#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */
 #define Z_SYNC_FLUSH    2
 #define Z_FULL_FLUSH    3
 #define Z_FINISH        4
@@ -156,16 +163,20 @@ typedef struct z_stream_s {
 
 #define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
 
-extern const char *zlib_version;
-/* The application can compare zlib_version and ZLIB_VERSION for consistency.
-   If the first character differs, the library code actually used is
-   not compatible with the zlib.h header file used by the application.
- */
+#define zlib_version zlibVersion()
+/* for compatibility with versions < 1.0.2 */
 
                         /* basic functions */
 
+ZEXTERN const char * ZEXPORT zlibVersion OF((void));
+/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
+   If the first character differs, the library code actually used is
+   not compatible with the zlib.h header file used by the application.
+   This check is automatically made by deflateInit and inflateInit.
+ */
+
 /* 
-extern int deflateInit OF((z_stream *strm, int level));
+ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
 
      Initializes the internal stream state for compression. The fields
    zalloc, zfree and opaque must be initialized before by the caller.
@@ -187,9 +198,15 @@ extern int deflateInit OF((z_stream *strm, int level));
 */
 
 
-extern int deflate OF((z_stream *strm, int flush));
+ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
 /*
-  Performs one or both of the following actions:
+    deflate compresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full. It may introduce some
+  output latency (reading input without producing any output) except when
+  forced to flush.
+
+    The detailed semantics are as follows. deflate performs one or both of the
+  following actions:
 
   - Compress more input starting at next_in and update next_in and avail_in
     accordingly. If not all input can be processed (because there is not
@@ -207,29 +224,30 @@ extern int deflate OF((z_stream *strm, int flush));
   more output, and updating avail_in or avail_out accordingly; avail_out
   should never be zero before the call. The application can consume the
   compressed output when it wants, for example when the output buffer is full
-  (avail_out == 0), or after each call of deflate().
+  (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK
+  and with zero avail_out, it must be called again after making room in the
+  output buffer because there might be more output pending.
 
-    If the parameter flush is set to Z_PARTIAL_FLUSH, the current compression
-  block is terminated and flushed to the output buffer so that the
-  decompressor can get all input data available so far. For method 9, a future
-  variant on method 8, the current block will be flushed but not terminated.
-  Z_SYNC_FLUSH has the same effect as partial flush except that the compressed
-  output is byte aligned (the compressor can clear its internal bit buffer)
-  and the current block is always terminated; this can be useful if the
-  compressor has to be restarted from scratch after an interruption (in which
-  case the internal state of the compressor may be lost).
-    If flush is set to Z_FULL_FLUSH, the compression block is terminated, a
-  special marker is output and the compression dictionary is discarded; this
-  is useful to allow the decompressor to synchronize if one compressed block
-  has been damaged (see inflateSync below).  Flushing degrades compression and
-  so should be used only when necessary.  Using Z_FULL_FLUSH too often can
-  seriously degrade the compression. If deflate returns with avail_out == 0,
-  this function must be called again with the same value of the flush
-  parameter and more output space (updated avail_out), until the flush is
-  complete (deflate returns with non-zero avail_out).
+    If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
+  flushed to the output buffer and the output is aligned on a byte boundary, so
+  that the decompressor can get all input data available so far. (In particular
+  avail_in is zero after the call if enough output space has been provided
+  before the call.)  Flushing may degrade compression for some compression
+  algorithms and so it should be used only when necessary.
 
-    If the parameter flush is set to Z_FINISH, all pending input is processed,
-  all pending output is flushed and deflate returns with Z_STREAM_END if there
+    If flush is set to Z_FULL_FLUSH, all output is flushed as with
+  Z_SYNC_FLUSH, and the compression state is reset so that decompression can
+  restart from this point if previous compressed data has been damaged or if
+  random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
+  the compression.
+
+    If deflate returns with avail_out == 0, this function must be called again
+  with the same value of the flush parameter and more output space (updated
+  avail_out), until the flush is complete (deflate returns with non-zero
+  avail_out).
+
+    If the parameter flush is set to Z_FINISH, pending input is processed,
+  pending output is flushed and deflate returns with Z_STREAM_END if there
   was enough output space; if deflate returns with Z_OK, this function must be
   called again with Z_FINISH and more output space (updated avail_out) but no
   more input data, until it returns with Z_STREAM_END or an error. After
@@ -241,6 +259,9 @@ extern int deflate OF((z_stream *strm, int flush));
   0.1% larger than avail_in plus 12 bytes.  If deflate does not return
   Z_STREAM_END, then it must be called again as described above.
 
+    deflate() sets strm->adler to the adler32 checksum of all input read
+  so far (that is, total_in bytes).
+
     deflate() may update data_type if it can make a good guess about
   the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
   binary. This field is only for information purposes and does not affect
@@ -250,11 +271,12 @@ extern int deflate OF((z_stream *strm, int flush));
   processed or more output produced), Z_STREAM_END if all input has been
   consumed and all output has been produced (only when flush is set to
   Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
-  if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible.
+  if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible
+  (for example avail_in or avail_out was zero).
 */
 
 
-extern int deflateEnd OF((z_stream *strm));
+ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
 /*
      All dynamically allocated data structures for this stream are freed.
    This function discards any unprocessed input and does not flush any
@@ -269,24 +291,35 @@ extern int deflateEnd OF((z_stream *strm));
 
 
 /* 
-extern int inflateInit OF((z_stream *strm));
+ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
 
      Initializes the internal stream state for decompression. The fields
-   zalloc, zfree and opaque must be initialized before by the caller.  If
-   zalloc and zfree are set to Z_NULL, inflateInit updates them to use default
-   allocation functions.
+   next_in, avail_in, zalloc, zfree and opaque must be initialized before by
+   the caller. If next_in is not Z_NULL and avail_in is large enough (the exact
+   value depends on the compression method), inflateInit determines the
+   compression method from the zlib header and allocates all data structures
+   accordingly; otherwise the allocation will be deferred to the first call of
+   inflate.  If zalloc and zfree are set to Z_NULL, inflateInit updates them to
+   use default allocation functions.
 
-     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
-   enough memory, Z_VERSION_ERROR if the zlib library version is incompatible
-   with the version assumed by the caller.  msg is set to null if there is no
-   error message. inflateInit does not perform any decompression: this will be
-   done by inflate().
+     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+   version assumed by the caller.  msg is set to null if there is no error
+   message. inflateInit does not perform any decompression apart from reading
+   the zlib header if present: this will be done by inflate().  (So next_in and
+   avail_in may be modified, but next_out and avail_out are unchanged.)
 */
 
 
-extern int inflate OF((z_stream *strm, int flush));
+ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
 /*
-  Performs one or both of the following actions:
+    inflate decompresses as much data as possible, and stops when the input
+  buffer becomes empty or the output buffer becomes full. It may some
+  introduce some output latency (reading input without producing any output)
+  except when forced to flush.
+
+  The detailed semantics are as follows. inflate performs one or both of the
+  following actions:
 
   - Decompress more input starting at next_in and update next_in and avail_in
     accordingly. If not all input can be processed (because there is not
@@ -294,19 +327,22 @@ extern int inflate OF((z_stream *strm, int flush));
     will resume at this point for the next call of inflate().
 
   - Provide more output starting at next_out and update next_out and avail_out
-    accordingly.  inflate() always provides as much output as possible
-    (until there is no more input data or no more space in the output buffer).
+    accordingly.  inflate() provides as much output as possible, until there
+    is no more input data or no more space in the output buffer (see below
+    about the flush parameter).
 
   Before the call of inflate(), the application should ensure that at least
   one of the actions is possible, by providing more input and/or consuming
   more output, and updating the next_* and avail_* values accordingly.
   The application can consume the uncompressed output when it wants, for
   example when the output buffer is full (avail_out == 0), or after each
-  call of inflate().
+  call of inflate(). If inflate returns Z_OK and with zero avail_out, it
+  must be called again after making room in the output buffer because there
+  might be more output pending.
 
-    If the parameter flush is set to Z_PARTIAL_FLUSH, inflate flushes as much
+    If the parameter flush is set to Z_SYNC_FLUSH, inflate flushes as much
   output as possible to the output buffer. The flushing behavior of inflate is
-  not specified for values of the flush parameter other than Z_PARTIAL_FLUSH
+  not specified for values of the flush parameter other than Z_SYNC_FLUSH
   and Z_FINISH, but the current implementation actually flushes as much output
   as possible anyway.
 
@@ -321,22 +357,30 @@ extern int inflate OF((z_stream *strm, int flush));
   is never required, but can be used to inform inflate that a faster routine
   may be used for the single inflate() call.
 
-    inflate() returns Z_OK if some progress has been made (more input
-  processed or more output produced), Z_STREAM_END if the end of the
-  compressed data has been reached and all uncompressed output has been
-  produced, Z_NEED_DICT if a preset dictionary is needed at this point (see
-  inflateSetDictionary below), Z_DATA_ERROR if the input data was corrupted,
-  Z_STREAM_ERROR if the stream structure was inconsistent (for example if
-  next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory,
-  Z_BUF_ERROR if no progress is possible or if there was not enough room in
-  the output buffer when Z_FINISH is used. In the Z_DATA_ERROR case, the
-  application may then call inflateSync to look for a good compression block.
-  In the Z_NEED_DICT case, strm->adler is set to the Adler32 value of the
-  dictionary chosen by the compressor.
+     If a preset dictionary is needed at this point (see inflateSetDictionary
+  below), inflate sets strm-adler to the adler32 checksum of the
+  dictionary chosen by the compressor and returns Z_NEED_DICT; otherwise 
+  it sets strm->adler to the adler32 checksum of all output produced
+  so far (that is, total_out bytes) and returns Z_OK, Z_STREAM_END or
+  an error code as described below. At the end of the stream, inflate()
+  checks that its computed adler32 checksum is equal to that saved by the
+  compressor and returns Z_STREAM_END only if the checksum is correct.
+
+    inflate() returns Z_OK if some progress has been made (more input processed
+  or more output produced), Z_STREAM_END if the end of the compressed data has
+  been reached and all uncompressed output has been produced, Z_NEED_DICT if a
+  preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
+  corrupted (input stream not conforming to the zlib format or incorrect
+  adler32 checksum), Z_STREAM_ERROR if the stream structure was inconsistent
+  (for example if next_in or next_out was NULL), Z_MEM_ERROR if there was not
+  enough memory, Z_BUF_ERROR if no progress is possible or if there was not
+  enough room in the output buffer when Z_FINISH is used. In the Z_DATA_ERROR
+  case, the application may then call inflateSync to look for a good
+  compression block.
 */
 
 
-extern int inflateEnd OF((z_stream *strm));
+ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
 /*
      All dynamically allocated data structures for this stream are freed.
    This function discards any unprocessed input and does not flush any
@@ -354,26 +398,25 @@ extern int inflateEnd OF((z_stream *strm));
 */
 
 /*   
-extern int deflateInit2 OF((z_stream *strm,
-                            int  level,
-                            int  method,
-                            int  windowBits,
-                            int  memLevel,
-                            int  strategy));
+ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
+                                     int  level,
+                                     int  method,
+                                     int  windowBits,
+                                     int  memLevel,
+                                     int  strategy));
 
      This is another version of deflateInit with more compression options. The
    fields next_in, zalloc, zfree and opaque must be initialized before by
    the caller.
 
      The method parameter is the compression method. It must be Z_DEFLATED in
-   this version of the library. (Method 9 will allow a 64K history buffer and
-   partial block flushes.)
+   this version of the library.
 
      The windowBits parameter is the base two logarithm of the window size
    (the size of the history buffer).  It should be in the range 8..15 for this
-   version of the library (the value 16 will be allowed for method 9). Larger
-   values of this parameter result in better compression at the expense of
-   memory usage. The default value is 15 if deflateInit is used instead.
+   version of the library. Larger values of this parameter result in better
+   compression at the expense of memory usage. The default value is 15 if
+   deflateInit is used instead.
 
      The memLevel parameter specifies how much memory should be allocated
    for the internal compression state. memLevel=1 uses minimum memory but
@@ -392,42 +435,35 @@ extern int deflateInit2 OF((z_stream *strm,
    the compression ratio but not the correctness of the compressed output even
    if it is not set appropriately.
 
-     If next_in is not null, the library will use this buffer to hold also
-   some history information; the buffer must either hold the entire input
-   data, or have at least 1<<(windowBits+1) bytes and be writable. If next_in
-   is null, the library will allocate its own history buffer (and leave next_in
-   null). next_out need not be provided here but must be provided by the
-   application for the next call of deflate().
-
-     If the history buffer is provided by the application, next_in must
-   must never be changed by the application since the compressor maintains
-   information inside this buffer from call to call; the application
-   must provide more input only by increasing avail_in. next_in is always
-   reset by the library in this case.
-
-      deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
-   not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
-   an invalid method). msg is set to null if there is no error message.
-   deflateInit2 does not perform any compression: this will be done by
-   deflate(). 
+      deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid
+   method). msg is set to null if there is no error message.  deflateInit2 does
+   not perform any compression: this will be done by deflate().
 */
                             
-extern int deflateSetDictionary OF((z_stream *strm,
-				    const Bytef *dictionary,
-				    uInt  dictLength));
+ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
+                                             const Bytef *dictionary,
+                                             uInt  dictLength));
 /*
-     Initializes the compression dictionary (history buffer) from the given
-   byte sequence without producing any compressed output. This function must
-   be called immediately after deflateInit or deflateInit2, before any call
-   of deflate. The compressor and decompressor must use exactly the same
+     Initializes the compression dictionary from the given byte sequence
+   without producing any compressed output. This function must be called
+   immediately after deflateInit, deflateInit2 or deflateReset, before any
+   call of deflate. The compressor and decompressor must use exactly the same
    dictionary (see inflateSetDictionary).
+
      The dictionary should consist of strings (byte sequences) that are likely
    to be encountered later in the data to be compressed, with the most commonly
    used strings preferably put towards the end of the dictionary. Using a
-   dictionary is most useful when the data to be compressed is short and
-   can be predicted with good accuracy; the data can then be compressed better
-   than with the default empty dictionary. In this version of the library,
-   only the last 32K bytes of the dictionary are used.
+   dictionary is most useful when the data to be compressed is short and can be
+   predicted with good accuracy; the data can then be compressed better than
+   with the default empty dictionary.
+
+     Depending on the size of the compression data structures selected by
+   deflateInit or deflateInit2, a part of the dictionary may in effect be
+   discarded, for example if the dictionary is larger than the window size in
+   deflate or deflate2. Thus the strings most likely to be useful should be
+   put at the end of the dictionary, not at the front.
+
      Upon return of this function, strm->adler is set to the Adler32 value
    of the dictionary; the decompressor may later use this value to determine
    which dictionary has been used by the compressor. (The Adler32 value
@@ -435,21 +471,16 @@ extern int deflateSetDictionary OF((z_stream *strm,
    actually used by the compressor.)
 
      deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
-   parameter is invalid (such as NULL dictionary) or the stream state
-   is inconsistent (for example if deflate has already been called for this
-   stream). deflateSetDictionary does not perform any compression: this will
-   be done by deflate(). 
+   parameter is invalid (such as NULL dictionary) or the stream state is
+   inconsistent (for example if deflate has already been called for this stream
+   or if the compression method is bsort). deflateSetDictionary does not
+   perform any compression: this will be done by deflate().
 */
 
-extern int deflateCopy OF((z_stream *dest,
-                           z_stream *source));
+ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
+                                    z_streamp source));
 /*
-     Sets the destination stream as a complete copy of the source stream.  If
-   the source stream is using an application-supplied history buffer, a new
-   buffer is allocated for the destination stream.  The compressed output
-   buffer is always application-supplied. It's the responsibility of the
-   application to provide the correct values of next_out and avail_out for the
-   next call of deflate.
+     Sets the destination stream as a complete copy of the source stream.
 
      This function can be useful when several compression strategies will be
    tried, for example when there are several ways of pre-processing the input
@@ -464,7 +495,7 @@ extern int deflateCopy OF((z_stream *dest,
    destination.
 */
 
-extern int deflateReset OF((z_stream *strm));
+ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
 /*
      This function is equivalent to deflateEnd followed by deflateInit,
    but does not free and reallocate all the internal compression state.
@@ -475,63 +506,59 @@ extern int deflateReset OF((z_stream *strm));
    stream state was inconsistent (such as zalloc or state being NULL).
 */
 
-extern int deflateParams OF((z_stream *strm, int level, int strategy));
+ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
+				      int level,
+				      int strategy));
 /*
-     Dynamically update the compression level and compression strategy.
-   This can be used to switch between compression and straight copy of
-   the input data, or to switch to a different kind of input data requiring
-   a different strategy. If the compression level is changed, the input
-   available so far is compressed with the old level (and may be flushed);
-   the new level will take effect only at the next call of deflate().
+     Dynamically update the compression level and compression strategy.  The
+   interpretation of level and strategy is as in deflateInit2.  This can be
+   used to switch between compression and straight copy of the input data, or
+   to switch to a different kind of input data requiring a different
+   strategy. If the compression level is changed, the input available so far
+   is compressed with the old level (and may be flushed); the new level will
+   take effect only at the next call of deflate().
+
+     Before the call of deflateParams, the stream state must be set as for
+   a call of deflate(), since the currently available input may have to
+   be compressed and flushed. In particular, strm->avail_out must be non-zero.
 
      deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
-   stream state was inconsistent or if a parameter was invalid.
+   stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR
+   if strm->avail_out was zero.
 */
 
 /*   
-extern int inflateInit2 OF((z_stream *strm,
-                            int  windowBits));
+ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
+                                     int  windowBits));
 
-     This is another version of inflateInit with more compression options. The
-   fields next_out, zalloc, zfree and opaque must be initialized before by
-   the caller.
+     This is another version of inflateInit with an extra parameter. The
+   fields next_in, avail_in, zalloc, zfree and opaque must be initialized
+   before by the caller.
 
      The windowBits parameter is the base two logarithm of the maximum window
    size (the size of the history buffer).  It should be in the range 8..15 for
-   this version of the library (the value 16 will be allowed soon). The
-   default value is 15 if inflateInit is used instead. If a compressed stream
-   with a larger window size is given as input, inflate() will return with
-   the error code Z_DATA_ERROR instead of trying to allocate a larger window.
+   this version of the library. The default value is 15 if inflateInit is used
+   instead. If a compressed stream with a larger window size is given as
+   input, inflate() will return with the error code Z_DATA_ERROR instead of
+   trying to allocate a larger window.
 
-     If next_out is not null, the library will use this buffer for the history
-   buffer; the buffer must either be large enough to hold the entire output
-   data, or have at least 1<<windowBits bytes.  If next_out is null, the
-   library will allocate its own buffer (and leave next_out null). next_in
-   need not be provided here but must be provided by the application for the
-   next call of inflate().
-
-     If the history buffer is provided by the application, next_out must
-   never be changed by the application since the decompressor maintains
-   history information inside this buffer from call to call; the application
-   can only reset next_out to the beginning of the history buffer when
-   avail_out is zero and all output has been consumed.
-
-      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
-   not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
-   windowBits < 8). msg is set to null if there is no error message.
-   inflateInit2 does not perform any decompression: this will be done by
-   inflate().
+      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative
+   memLevel). msg is set to null if there is no error message.  inflateInit2
+   does not perform any decompression apart from reading the zlib header if
+   present: this will be done by inflate(). (So next_in and avail_in may be
+   modified, but next_out and avail_out are unchanged.)
 */
 
-extern int inflateSetDictionary OF((z_stream *strm,
-				    const Bytef *dictionary,
-				    uInt  dictLength));
+ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
+                                             const Bytef *dictionary,
+                                             uInt  dictLength));
 /*
-     Initializes the decompression dictionary (history buffer) from the given
-   uncompressed byte sequence. This function must be called immediately after
-   a call of inflate if this call returned Z_NEED_DICT. The dictionary chosen
-   by the compressor can be determined from the Adler32 value returned by this
-   call of inflate. The compressor and decompressor must use exactly the same
+     Initializes the decompression dictionary from the given uncompressed byte
+   sequence. This function must be called immediately after a call of inflate
+   if this call returned Z_NEED_DICT. The dictionary chosen by the compressor
+   can be determined from the Adler32 value returned by this call of
+   inflate. The compressor and decompressor must use exactly the same
    dictionary (see deflateSetDictionary).
 
      inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
@@ -542,14 +569,14 @@ extern int inflateSetDictionary OF((z_stream *strm,
    inflate().
 */
 
-extern int inflateSync OF((z_stream *strm));
+ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
 /* 
-    Skips invalid compressed data until the special marker (see deflate()
-  above) can be found, or until all available input is skipped. No output
-  is provided.
+    Skips invalid compressed data until a full flush point (see above the
+  description of deflate with Z_FULL_FLUSH) can be found, or until all
+  available input is skipped. No output is provided.
 
-    inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR
-  if no more input was provided, Z_DATA_ERROR if no marker has been found,
+    inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
+  if no more input was provided, Z_DATA_ERROR if no flush point has been found,
   or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
   case, the application may save the current current value of total_in which
   indicates where valid compressed data was found. In the error case, the
@@ -557,7 +584,7 @@ extern int inflateSync OF((z_stream *strm));
   until success or end of the input data.
 */
 
-extern int inflateReset OF((z_stream *strm));
+ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
 /*
      This function is equivalent to inflateEnd followed by inflateInit,
    but does not free and reallocate all the internal decompression state.
@@ -573,13 +600,13 @@ extern int inflateReset OF((z_stream *strm));
 /*
      The following utility functions are implemented on top of the
    basic stream-oriented functions. To simplify the interface, some
-   default options are assumed (compression level, window size,
+   default options are assumed (compression level and memory usage,
    standard memory allocation functions). The source code of these
    utility functions can easily be modified if you need special options.
 */
 
-extern int compress OF((Bytef *dest,   uLongf *destLen,
-                        const Bytef *source, uLong sourceLen));
+ZEXTERN int ZEXPORT compress OF((Bytef *dest,   uLongf *destLen,
+                                 const Bytef *source, uLong sourceLen));
 /*
      Compresses the source buffer into the destination buffer.  sourceLen is
    the byte length of the source buffer. Upon entry, destLen is the total
@@ -593,8 +620,23 @@ extern int compress OF((Bytef *dest,   uLongf *destLen,
    buffer.
 */
 
-extern int uncompress OF((Bytef *dest,   uLongf *destLen,
-                          const Bytef *source, uLong sourceLen));
+ZEXTERN int ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
+                                  const Bytef *source, uLong sourceLen,
+                                  int level));
+/*
+     Compresses the source buffer into the destination buffer. The level
+   parameter has the same meaning as in deflateInit.  sourceLen is the byte
+   length of the source buffer. Upon entry, destLen is the total size of the
+   destination buffer, which must be at least 0.1% larger than sourceLen plus
+   12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
+
+     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
+   Z_STREAM_ERROR if the level parameter is invalid.
+*/
+
+ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
+                                   const Bytef *source, uLong sourceLen));
 /*
      Decompresses the source buffer into the destination buffer.  sourceLen is
    the byte length of the source buffer. Upon entry, destLen is the total
@@ -614,24 +656,28 @@ extern int uncompress OF((Bytef *dest,   uLongf *destLen,
 
 typedef voidp gzFile;
 
-extern gzFile gzopen  OF((const char *path, const char *mode));
+ZEXTERN gzFile ZEXPORT gzopen  OF((const char *path, const char *mode));
 /*
      Opens a gzip (.gz) file for reading or writing. The mode parameter
    is as in fopen ("rb" or "wb") but can also include a compression level
-   ("wb9").  gzopen can be used to read a file which is not in gzip format;
-   in this case gzread will directly read from the file without decompression.
+   ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for
+   Huffman only compression as in "wb1h". (See the description
+   of deflateInit2 for more information about the strategy parameter.)
+
+     gzopen can be used to read a file which is not in gzip format; in this
+   case gzread will directly read from the file without decompression.
+
      gzopen returns NULL if the file could not be opened or if there was
    insufficient memory to allocate the (de)compression state; errno
    can be checked to distinguish the two cases (if errno is zero, the
-   zlib error is Z_MEM_ERROR).
-*/
+   zlib error is Z_MEM_ERROR).  */
 
-extern gzFile gzdopen  OF((int fd, const char *mode));
+ZEXTERN gzFile ZEXPORT gzdopen  OF((int fd, const char *mode));
 /*
      gzdopen() associates a gzFile with the file descriptor fd.  File
    descriptors are obtained from calls like open, dup, creat, pipe or
    fileno (in the file has been previously opened with fopen).
-   The mode parameter is as in fopen ("rb" or "wb").
+   The mode parameter is as in gzopen.
      The next call of gzclose on the returned gzFile will also close the
    file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
    descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode).
@@ -639,7 +685,15 @@ extern gzFile gzdopen  OF((int fd, const char *mode));
    the (de)compression state.
 */
 
-extern int    gzread  OF((gzFile file, voidp buf, unsigned len));
+ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
+/*
+     Dynamically update the compression level or strategy. See the description
+   of deflateInit2 for the meaning of these parameters.
+     gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not
+   opened for writing.
+*/
+
+ZEXTERN int ZEXPORT    gzread  OF((gzFile file, voidp buf, unsigned len));
 /*
      Reads the given number of uncompressed bytes from the compressed file.
    If the input file was not in gzip format, gzread copies the given number
@@ -647,14 +701,50 @@ extern int    gzread  OF((gzFile file, voidp buf, unsigned len));
      gzread returns the number of uncompressed bytes actually read (0 for
    end of file, -1 for error). */
 
-extern int    gzwrite OF((gzFile file, const voidp buf, unsigned len));
+ZEXTERN int ZEXPORT    gzwrite OF((gzFile file, 
+				   const voidp buf, unsigned len));
 /*
      Writes the given number of uncompressed bytes into the compressed file.
    gzwrite returns the number of uncompressed bytes actually written
    (0 in case of error).
 */
 
-extern int    gzflush OF((gzFile file, int flush));
+ZEXTERN int ZEXPORTVA   gzprintf OF((gzFile file, const char *format, ...));
+/*
+     Converts, formats, and writes the args to the compressed file under
+   control of the format string, as in fprintf. gzprintf returns the number of
+   uncompressed bytes actually written (0 in case of error).
+*/
+
+ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
+/*
+      Writes the given null-terminated string to the compressed file, excluding
+   the terminating null character.
+      gzputs returns the number of characters written, or -1 in case of error.
+*/
+
+ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
+/*
+      Reads bytes from the compressed file until len-1 characters are read, or
+   a newline character is read and transferred to buf, or an end-of-file
+   condition is encountered.  The string is then terminated with a null
+   character.
+      gzgets returns buf, or Z_NULL in case of error.
+*/
+
+ZEXTERN int ZEXPORT    gzputc OF((gzFile file, int c));
+/*
+      Writes c, converted to an unsigned char, into the compressed file.
+   gzputc returns the value that was written, or -1 in case of error.
+*/
+
+ZEXTERN int ZEXPORT    gzgetc OF((gzFile file));
+/*
+      Reads one byte from the compressed file. gzgetc returns this byte
+   or -1 in case of end of file or error.
+*/
+
+ZEXTERN int ZEXPORT    gzflush OF((gzFile file, int flush));
 /*
      Flushes all pending output into the compressed file. The parameter
    flush is as in the deflate() function. The return value is the zlib
@@ -664,14 +754,54 @@ extern int    gzflush OF((gzFile file, int flush));
    degrade compression.
 */
 
-extern int    gzclose OF((gzFile file));
+ZEXTERN z_off_t ZEXPORT    gzseek OF((gzFile file,
+				      z_off_t offset, int whence));
+/* 
+      Sets the starting position for the next gzread or gzwrite on the
+   given compressed file. The offset represents a number of bytes in the
+   uncompressed data stream. The whence parameter is defined as in lseek(2);
+   the value SEEK_END is not supported.
+     If the file is opened for reading, this function is emulated but can be
+   extremely slow. If the file is opened for writing, only forward seeks are
+   supported; gzseek then compresses a sequence of zeroes up to the new
+   starting position.
+
+      gzseek returns the resulting offset location as measured in bytes from
+   the beginning of the uncompressed stream, or -1 in case of error, in
+   particular if the file is opened for writing and the new starting position
+   would be before the current position.
+*/
+
+ZEXTERN int ZEXPORT    gzrewind OF((gzFile file));
+/*
+     Rewinds the given file. This function is supported only for reading.
+
+   gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
+*/
+
+ZEXTERN z_off_t ZEXPORT    gztell OF((gzFile file));
+/*
+     Returns the starting position for the next gzread or gzwrite on the
+   given compressed file. This position represents a number of bytes in the
+   uncompressed data stream.
+
+   gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
+*/
+
+ZEXTERN int ZEXPORT gzeof OF((gzFile file));
+/*
+     Returns 1 when EOF has previously been detected reading the given
+   input stream, otherwise zero.
+*/
+
+ZEXTERN int ZEXPORT    gzclose OF((gzFile file));
 /*
      Flushes all pending output if necessary, closes the compressed file
    and deallocates all the (de)compression state. The return value is the zlib
    error number (see function gzerror below).
 */
 
-extern char*   gzerror OF((gzFile file, int *errnum));
+ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
 /*
      Returns the error message for the last error which occurred on the
    given compressed file. errnum is set to zlib error number. If an
@@ -688,7 +818,7 @@ extern char*   gzerror OF((gzFile file, int *errnum));
    compression library.
 */
 
-extern uLong adler32 OF((uLong adler, const Bytef *buf, uInt len));
+ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
 
 /*
      Update a running Adler-32 checksum with the bytes buf[0..len-1] and
@@ -705,7 +835,7 @@ extern uLong adler32 OF((uLong adler, const Bytef *buf, uInt len));
      if (adler != original_adler) error();
 */
 
-extern uLong crc32   OF((uLong crc, const Bytef *buf, uInt len));
+ZEXTERN uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
 /*
      Update a running crc with the bytes buf[0..len-1] and return the updated
    crc. If buf is NULL, this function returns the required initial value
@@ -727,30 +857,34 @@ extern uLong crc32   OF((uLong crc, const Bytef *buf, uInt len));
 /* deflateInit and inflateInit are macros to allow checking the zlib version
  * and the compiler's view of z_stream:
  */
-extern int deflateInit_ OF((z_stream *strm, int level,
-			    const char *version, int stream_size));
-extern int inflateInit_ OF((z_stream *strm,
-			    const char *version, int stream_size));
-extern int deflateInit2_ OF((z_stream *strm, int  level, int  method,
-                             int  windowBits, int  memLevel, int  strategy,
-			     const char *version, int stream_size));
-extern int inflateInit2_ OF((z_stream *strm, int  windowBits,
-			     const char *version, int stream_size));
+ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
+                                     const char *version, int stream_size));
+ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
+                                     const char *version, int stream_size));
+ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int  level, int  method,
+                                      int windowBits, int memLevel,
+                                      int strategy, const char *version,
+                                      int stream_size));
+ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
+                                      const char *version, int stream_size));
 #define deflateInit(strm, level) \
         deflateInit_((strm), (level),       ZLIB_VERSION, sizeof(z_stream))
 #define inflateInit(strm) \
         inflateInit_((strm),                ZLIB_VERSION, sizeof(z_stream))
 #define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \
         deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\
-		      (strategy),           ZLIB_VERSION, sizeof(z_stream))
+                      (strategy),           ZLIB_VERSION, sizeof(z_stream))
 #define inflateInit2(strm, windowBits) \
         inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
 
-#ifndef _Z_UTIL_H
+
+#if !defined(_Z_UTIL_H) && !defined(NO_DUMMY_DECL)
     struct internal_state {int dummy;}; /* hack for buggy compilers */
 #endif
 
-uLongf *get_crc_table OF((void)); /* can be used by asm versions of crc32() */
+ZEXTERN const char   * ZEXPORT zError           OF((int err));
+ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp z));
+ZEXTERN const uLongf * ZEXPORT get_crc_table    OF((void));
 
 #ifdef __cplusplus
 }