zlib 0.91

zlib 0.9
2011-09-09 23:07:35 -07:00 · 2011-09-09 23:06:52 -07:00
24 changed files with 822 additions and 215 deletions
--- a/22
+++ b/22
@@ -1,10 +1,32 @@
 		ChangeLog file for zlib

+Changes in 0.91 (2 May 95)
+- Default MEM_LEVEL is 8 (not 9 for Unix) as documented in zlib.h
+- Document the memory requirements in zconf.h
+- added "make install"
+- fix sync search logic in inflateSync
+- deflate(Z_FULL_FLUSH) now works even if output buffer too short
+- after inflateSync, don't scare people with just "lo world"
+- added support for DJGPP
+
+Changes in 0.9 (1 May 95)
+- don't assume that zalloc clears the allocated memory (the TurboC bug
+  was Mark's bug after all :)
+- let again gzread copy uncompressed data unchanged (was working in 0.71)
+- deflate(Z_FULL_FLUSH), inflateReset and inflateSync are now fully implemented
+- added a test of inflateSync in example.c
+- moved MAX_WBITS to zconf.h because users might want to change that.
+- document explicitly that zalloc(64K) on MSDOS must return a normalized
+  pointer (zero offset)
+- added Makefiles for Microsoft C, Turbo C, Borland C++
+- faster crc32()
+
 Changes in 0.8 (29 April 95)
 - added fast inflate (inffast.c)
 - deflate(Z_FINISH) now returns Z_STREAM_END when done. Warning: this
  is incompatible with previous versions of zlib which returned Z_OK.
 - work around a TurboC compiler bug (bad code for b << 0, see infutil.h)
+  (actually that was not a compiler bug, see 0.81 above)
 - gzread no longer reads one extra byte in certain cases
 - In gzio destroy(), don't reference a freed structure
 - avoid many warnings for MSDOS
--- a/19
+++ b/19
@@ -1,10 +1,17 @@
+# Makefile for zlib
+# Copyright (C) 1995 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h 
+
 CC=cc
 CFLAGS=-O
+#CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
 #CFLAGS=-g -DDEBUG
 LDFLAGS=-L. -lgz

 RANLIB=ranlib

+prefix=/usr/local
+
 OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o

@@ -16,6 +23,14 @@ test: all
 	./example
 	echo hello world | ./minigzip | ./minigzip -d 

+install: libgz.a
+	-@mkdir $(prefix)/include
+	-@mkdir $(prefix)/lib
+	cp zlib.h zconf.h $(prefix)/include
+	chmod 644 $(prefix)/include/zlib.h $(prefix)/include/zconf.h
+	cp libgz.a $(prefix)/lib
+	chmod 644 $(prefix)/lib/libgz.a
+
 libgz.a: $(OBJS)
 	ar rc $@ $(OBJS)
 	$(RANLIB) $@
@@ -33,11 +48,11 @@ clean:
 	rm -f *.o example minigzip inftest libgz.a foo.gz

 zip:
-	zip -ul9 zlib README ChangeLog Makefile *.[ch]
+	zip -ul9 zlib README ChangeLog Makefile Makefile.??? Makefile.?? *.[ch]

 tgz:
 	cd ..; tar cfz zlib/zlib.tgz zlib/README zlib/ChangeLog zlib/Makefile \
-		zlib/*.[ch]
+		zlib/Makefile.??? zlib/Makefile.?? zlib/*.[ch]

 # DO NOT DELETE THIS LINE -- make depend depends on it.

--- a/Makefile.bor
+++ b/Makefile.bor
@@ -0,0 +1,101 @@
+# Makefile for zlib
+# Borland C++   ************ UNTESTED ***********
+
+# To use, do "make -fmakefile.bor"
+
+# WARNING: the small model is supported but only for small values of
+# MAX_WBITS and MAX_MEM_LEVEL. If you wish to reduce the memory
+# requirements (default 256K for big objects plus a few K), you can add
+# to CFLAGS below: -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
+# See zconf.h for details about the memory requirements.
+
+# ------------- Turbo C++, Borland C++ -------------
+MODEL=-ml
+CFLAGS=-O2 -Z $(MODEL)
+CC=bcc
+LD=bcc
+LIB=tlib
+#   replace bcc with tcc for Turbo C++ 1.0
+LDFLAGS=$(MODEL)
+O=.obj
+
+# variables
+OBJ1 = adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) \
+  trees$(O)
+OBJP1 = adler32$(O)+compress$(O)+crc32$(O)+gzio$(O)+uncompr$(O)+deflate$(O)+\
+  trees$(O)
+OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
+  infutil$(O) inffast$(O)
+OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
+  infutil$(O)+inffast$(O)
+
+all: test
+
+adler32.obj: adler32.c zutil.h zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+compress.obj: compress.c zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+crc32.obj: crc32.c zutil.h zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+gzio.obj: gzio.c zutil.h zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h\
+   infcodes.h infutil.h
+	$(CC) -c $(CFLAGS) $*.c
+
+infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h\
+   infcodes.h inffast.h
+	$(CC) -c $(CFLAGS) $*.c
+
+inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
+	$(CC) -c $(CFLAGS) $*.c
+
+inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+	$(CC) -c $(CFLAGS) $*.c
+
+infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
+	$(CC) -c $(CFLAGS) $*.c
+
+inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+	$(CC) -c $(CFLAGS) $*.c
+
+trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+uncompr.obj: uncompr.c zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+zutil.obj: zutil.c zutil.h zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+example.obj: example.c zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+minigzip.obj: minigzip.c zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+# we must cut the command line to fit in the MS/DOS 128 byte limit:
+zlib.lib: $(OBJ1) $(OBJ2)
+	$(LIB) zlib +$(OBJP1)
+	$(LIB) zlib +$(OBJP2)
+
+example.exe: example.obj zlib.lib
+	$(LD) $(LDFLAGS) example.obj zlib.lib
+
+minigzip.exe: minigzip.obj zlib.lib
+	$(LD) $(LDFLAGS) minigzip.obj zlib.lib
+
+test: example.exe minigzip.exe
+	example
+	echo hello world | minigzip | minigzip -d 
+
+#clean:
+#	del *.obj
+#	del *.exe
--- a/Makefile.msc
+++ b/Makefile.msc
@@ -0,0 +1,98 @@
+# Makefile for zlib
+# Microsoft C 5.1 or later
+
+# To use, do "make makefile.msc"
+
+# WARNING: the small model is supported but only for small values of
+# MAX_WBITS and MAX_MEM_LEVEL. If you wish to reduce the memory
+# requirements (default 256K for big objects plus a few K), you can add
+# to CFLAGS below: -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
+# See zconf.h for details about the memory requirements.
+
+# ------------- Microsoft C 5.1 and later -------------
+MODEL=-AL
+CFLAGS=-Oait -Gs -nologo -W3 $(MODEL)
+#-Ox generates bad code with MSC 5.1
+CC=cl
+LD=link
+LDFLAGS=/e/st:0x1000/noe
+O=.obj
+
+# variables
+OBJ1 = adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) \
+  trees$(O)
+OBJP1 = adler32$(O)+compress$(O)+crc32$(O)+gzio$(O)+uncompr$(O)+deflate$(O)+\
+  trees$(O)
+OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
+  infutil$(O) inffast$(O)
+OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
+  infutil$(O)+inffast$(O)
+
+adler32.obj: adler32.c zutil.h zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+compress.obj: compress.c zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+crc32.obj: crc32.c zutil.h zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+gzio.obj: gzio.c zutil.h zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h\
+   infcodes.h infutil.h
+	$(CC) -c $(CFLAGS) $*.c
+
+infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h\
+   infcodes.h inffast.h
+	$(CC) -c $(CFLAGS) $*.c
+
+inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
+	$(CC) -c $(CFLAGS) $*.c
+
+inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+	$(CC) -c $(CFLAGS) $*.c
+
+infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
+	$(CC) -c $(CFLAGS) $*.c
+
+inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+	$(CC) -c $(CFLAGS) $*.c
+
+trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+uncompr.obj: uncompr.c zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+zutil.obj: zutil.c zutil.h zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+example.obj: example.c zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+minigzip.obj: minigzip.c zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+# we must cut the command line to fit in the MS/DOS 128 byte limit:
+zlib.lib: $(OBJ1) $(OBJ2)
+	lib zlib $(OBJ1);
+	lib zlib $(OBJ2);
+
+example.exe: example.obj zlib.lib
+	$(LD) $(LDFLAGS) example.obj,,,zlib.lib;
+
+minigzip.exe: minigzip.obj zlib.lib
+	$(LD) $(LDFLAGS) minigzip.obj,,,zlib.lib;
+
+test: example.exe minigzip.exe
+	example
+	echo hello world | minigzip | minigzip -d 
+
+#clean:
+#	del *.obj
+#	del *.exe
--- a/Makefile.tc
+++ b/Makefile.tc
@@ -0,0 +1,100 @@
+# Makefile for zlib
+# TurboC 2.0
+
+# To use, do "make -fmakefile.tc"
+
+# WARNING: the small model is supported but only for small values of
+# MAX_WBITS and MAX_MEM_LEVEL. If you wish to reduce the memory
+# requirements (default 256K for big objects plus a few K), you can add
+# to CFLAGS below: -DMAX_MEM_LEVEL=7 -DMAX_WBITS=14
+# See zconf.h for details about the memory requirements.
+
+# ------------- Turbo C 2.0 -------------
+MODEL=-ml
+CFLAGS=-O2 -Z $(MODEL)
+CC=tcc
+LD=tcc
+LIB=tlib
+LDFLAGS=$(MODEL)
+O=.obj
+
+# variables
+OBJ1 = adler32$(O) compress$(O) crc32$(O) gzio$(O) uncompr$(O) deflate$(O) \
+  trees$(O)
+OBJP1 = adler32$(O)+compress$(O)+crc32$(O)+gzio$(O)+uncompr$(O)+deflate$(O)+\
+  trees$(O)
+OBJ2 = zutil$(O) inflate$(O) infblock$(O) inftrees$(O) infcodes$(O) \
+  infutil$(O) inffast$(O)
+OBJP2 = zutil$(O)+inflate$(O)+infblock$(O)+inftrees$(O)+infcodes$(O)+\
+  infutil$(O)+inffast$(O)
+
+all: test
+
+adler32.obj: adler32.c zutil.h zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+compress.obj: compress.c zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+crc32.obj: crc32.c zutil.h zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+gzio.obj: gzio.c zutil.h zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+infblock.obj: infblock.c zutil.h zlib.h zconf.h infblock.h inftrees.h\
+   infcodes.h infutil.h
+	$(CC) -c $(CFLAGS) $*.c
+
+infcodes.obj: infcodes.c zutil.h zlib.h zconf.h inftrees.h infutil.h\
+   infcodes.h inffast.h
+	$(CC) -c $(CFLAGS) $*.c
+
+inflate.obj: inflate.c zutil.h zlib.h zconf.h infblock.h
+	$(CC) -c $(CFLAGS) $*.c
+
+inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+	$(CC) -c $(CFLAGS) $*.c
+
+infutil.obj: infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
+	$(CC) -c $(CFLAGS) $*.c
+
+inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
+	$(CC) -c $(CFLAGS) $*.c
+
+trees.obj: trees.c deflate.h zutil.h zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+uncompr.obj: uncompr.c zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+zutil.obj: zutil.c zutil.h zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+example.obj: example.c zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+minigzip.obj: minigzip.c zlib.h zconf.h
+	$(CC) -c $(CFLAGS) $*.c
+
+# we must cut the command line to fit in the MS/DOS 128 byte limit:
+zlib.lib: $(OBJ1) $(OBJ2)
+	$(LIB) zlib +$(OBJP1)
+	$(LIB) zlib +$(OBJP2)
+
+example.exe: example.obj zlib.lib
+	$(LD) $(LDFLAGS) -eexample.exe example.obj zlib.lib
+
+minigzip.exe: minigzip.obj zlib.lib
+	$(LD) $(LDFLAGS) -eminigzip.exe minigzip.obj zlib.lib
+
+test: example.exe minigzip.exe
+	example
+	echo hello world | minigzip | minigzip -d 
+
+#clean:
+#	del *.obj
+#	del *.exe
--- a/33
+++ b/33
@@ -1,28 +1,31 @@
-zlib 0.8 is a beta version of a general purpose compression library.
-This is the first version with no known bugs. (There may still be
-problem on SGI, to be checked.)
+zlib 0.91 is a beta version of a general purpose compression library.

 The data format used by the zlib library is described in the
-file zlib-3.1.doc, deflate-1.1.doc and gzip-4.1.doc, available
+files zlib-3.1.doc, deflate-1.1.doc and gzip-4.1.doc, available
 in ftp.uu.net:/pub/archiving/zip/doc.

 All functions of the compression library are documented in the file
 zlib.h. A usage example of the library is given in the file example.c
 which also tests that the library is working correctly.
-To compile all files and run the test program, just type: make test

-The changes made in version 0.8 are documented in the file ChangeLog.
-The main changes since 0.71 are:
- added fast inflate (inffast.c)
- deflate(Z_FINISH) now returns Z_STREAM_END when done. Warning: this
-  is incompatible with previous versions of zlib which returned Z_OK.
- work around a nasty TurboC compiler bug
+To compile all files and run the test program, just type: make test
+(For MSDOS, use one of the special makefiles such as Makefile.msc.)
+To install the zlib library (libgz.a) in /usr/local/lib, type: make install
+To install in a different directory, use for example: make install prefix=$HOME
+This will install in $HOME/lib instead of /usr/local/lib.
+
+The changes made in version 0.91 are documented in the file ChangeLog.
+The main changes since 0.9 are:
+- Default MEM_LEVEL is 8 (not 9 for Unix) as documented in zlib.h
+- Document the memory requirements in zconf.h
+- added "make install"
+- added support for DJGPP

 On MSDOS, this version works in both large and small model. However
-small model compression works only for small values of MEM_LEVEL and
-WBITS (see zutil.h). Small model decompression should work up to WBITS=15.
-This version of zlib does not yet support small or medium model with
-far allocation of big objects.
+small model compression works only for small values of MAX_MEM_LEVEL
+and MAX_WBITS (see zconf.h). Small model decompression should work up
+to MAX_WBITS=15.  This version of zlib does not support small or
+medium model with far allocation of big objects.


  Copyright (C) 1995 Jean-loup Gailly and Mark Adler
--- a/crc32.c
+++ b/crc32.c
@@ -3,12 +3,17 @@
 * For conditions of distribution and use, see copyright notice in zlib.h 
 */

-/* $Id: crc32.c,v 1.4 1995/04/14 14:55:12 jloup Exp $ */
+/* $Id: crc32.c,v 1.5 1995/05/01 13:55:46 jloup Exp $ */

 #include "zlib.h"

 extern uLong crc_table[];   /* crc table, defined below */

+#define DO1(buf) crc = crc_table[((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8);
+#define DO2(buf)  DO1(buf); DO1(buf);
+#define DO4(buf)  DO2(buf); DO2(buf);
+#define DO8(buf)  DO4(buf); DO4(buf);
+
 /* ========================================================================= */
 uLong crc32(crc, buf, len)
    uLong crc;
@@ -17,8 +22,13 @@ uLong crc32(crc, buf, len)
 {
    if (buf == Z_NULL) return 0L;
    crc = crc ^ 0xffffffffL;
+    while (len >= 8)
+    {
+      DO8(buf);
+      len -= 8;
+    }
    if (len) do {
-	crc = crc_table[((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8);
+      DO1(buf);
    } while (--len);
    return crc ^ 0xffffffffL;
 }
@@ -29,7 +39,7 @@ uLong crc32(crc, buf, len)
 */
 #ifdef DYNAMIC_CRC_TABLE

-void make_crc_table()
+local void make_crc_table()
 {
  uLong c;
  int n, k;
--- a/deflate.c
+++ b/deflate.c
@@ -47,7 +47,7 @@
 *
 */

-/* $Id: deflate.c,v 1.5 1995/04/29 16:52:05 jloup Exp $ */
+/* $Id: deflate.c,v 1.7 1995/05/02 13:28:18 jloup Exp $ */

 #include "deflate.h"

@@ -152,12 +152,20 @@ local  void check_match __P((deflate_state *s, IPos start, IPos match,
    s->prev[(str) & s->w_mask] = match_head = s->head[s->ins_h], \
    s->head[s->ins_h] = (str))

+/* ===========================================================================
+ * Initialize the hash table (avoiding 64K overflow for 16 bit systems).
+ * prev[] will be initialized on the fly.
+ */
+#define CLEAR_HASH(s) \
+    s->head[s->hash_size-1] = NIL; \
+    zmemzero((char*)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
+
 /* ========================================================================= */
 int deflateInit (strm, level)
    z_stream *strm;
    int level;
 {
-    return deflateInit2 (strm, level, DEFLATED, WBITS, MEM_LEVEL, 0);
+    return deflateInit2 (strm, level, DEFLATED, MAX_WBITS, DEF_MEM_LEVEL, 0);
    /* To do: ignore strm->next_in if we use it as window */
 }

@@ -336,15 +344,23 @@ int deflate (strm, flush)
     */
    if (strm->avail_in != 0 ||
 	(flush == Z_FINISH && strm->state->status != FINISH_STATE)) {
+	int quit;
 	
 	if (flush == Z_FINISH) {
 	    strm->state->status = FINISH_STATE;
 	}
        if (strm->state->level <= 3) {
-	    if (deflate_fast(strm->state, flush)) return Z_OK;
+	    quit = deflate_fast(strm->state, flush);
 	} else {
-	    if (deflate_slow(strm->state, flush)) return Z_OK;
+	    quit = deflate_slow(strm->state, flush);
 	}
+	if (flush == Z_FULL_FLUSH) {
+	    ct_stored_block(strm->state, (char*)0, 0L, 0); /* special marker */
+	    flush_pending(strm);
+	    CLEAR_HASH(strm->state);             /* forget history */
+	    if (strm->avail_out == 0) return Z_OK;
+	}
+	if (quit) return Z_OK;
    }
    Assert(strm->avail_out > 0, "bug2");

@@ -435,12 +451,7 @@ local void lm_init (s)

    s->window_size = (ulg)2L*s->w_size;

-
-    /* Initialize the hash table (avoiding 64K overflow for 16 bit systems).
-     * prev[] will be initialized on the fly.
-     */
-    s->head[s->hash_size-1] = NIL;
-    zmemzero((char*)s->head, (unsigned)(s->hash_size-1)*sizeof(*s->head));
+    CLEAR_HASH(s);

    /* Set the default configuration parameters:
     */
@@ -930,8 +941,10 @@ local int deflate_slow(s, flush)
            s->lookahead--;
        }
    }
-    if (s->match_available) ct_tally (s, 0, s->window[s->strstart-1]);
-
+    if (s->match_available) {
+	ct_tally (s, 0, s->window[s->strstart-1]);
+	s->match_available = 0;
+    }
    FLUSH_BLOCK(s, flush == Z_FINISH);
    return 0;
 }
--- a/deflate.h
+++ b/deflate.h
@@ -8,7 +8,7 @@
   subject to change. Applications should only use zlib.h.
 */

-/* $Id: deflate.h,v 1.3 1995/04/14 12:39:45 jloup Exp $ */
+/* $Id: deflate.h,v 1.4 1995/05/01 15:08:45 jloup Exp $ */

 #include "zutil.h"

@@ -268,3 +268,5 @@ typedef struct internal_state {
 void ct_init       __P((deflate_state *s));
 int  ct_tally      __P((deflate_state *s, int dist, int lc));
 ulg ct_flush_block __P((deflate_state *s, char *buf, ulg stored_len, int eof));
+void ct_stored_block __P((deflate_state *s, char *buf, ulg stored_len,
+			  int eof));
--- a/example.c
+++ b/example.c
@@ -3,7 +3,7 @@
 * For conditions of distribution and use, see copyright notice in zlib.h 
 */

-/* $Id: example.c,v 1.6 1995/04/29 16:53:46 jloup Exp $ */
+/* $Id: example.c,v 1.8 1995/05/02 15:52:32 jloup Exp $ */

 #include <stdio.h>
 #include "zlib.h"
@@ -12,7 +12,9 @@
 #  include <string.h>
 #endif

+#ifndef __GO32__
 extern void exit  __P((int));
+#endif

 #define BUFLEN 4096

@@ -181,6 +183,81 @@ void test_inflate(compr)
    }
 }

+/* ===========================================================================
+ * Test deflate() with full flush
+ */
+void test_flush(compr)
+    Byte compr[];
+{
+    z_stream c_stream; /* compression stream */
+    int err;
+    int len = strlen(hello)+1;
+
+    c_stream.zalloc = (alloc_func)0;
+    c_stream.zfree = (free_func)0;
+
+    err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
+    CHECK_ERR(err, "deflateInit");
+
+    c_stream.next_in  = (Byte*)hello;
+    c_stream.next_out = compr;
+    c_stream.avail_in = 3;
+    c_stream.avail_out = BUFLEN;
+    err = deflate(&c_stream, Z_FULL_FLUSH);
+    CHECK_ERR(err, "deflate");
+
+    compr[3]++; /* force an error in first compressed block */
+    c_stream.avail_in = len - 3;
+
+    err = deflate(&c_stream, Z_FINISH);
+    if (err != Z_STREAM_END) {
+	CHECK_ERR(err, "deflate");
+    }
+    err = deflateEnd(&c_stream);
+    CHECK_ERR(err, "deflateEnd");
+}
+
+/* ===========================================================================
+ * Test inflateSync()
+ */
+void test_sync(compr)
+    Byte compr[];
+{
+    local Byte uncompr[BUFLEN];
+    int err;
+    z_stream d_stream; /* decompression stream */
+
+    strcpy((char*)uncompr, "garbage");
+
+    d_stream.zalloc = (alloc_func)0;
+    d_stream.zfree = (free_func)0;
+
+    err = inflateInit(&d_stream);
+    CHECK_ERR(err, "inflateInit");
+
+    d_stream.next_in  = compr;
+    d_stream.next_out = uncompr;
+    d_stream.avail_in = 2; /* just read the zlib header */
+    d_stream.avail_out = sizeof(uncompr);
+
+    inflate(&d_stream, Z_NO_FLUSH);
+    CHECK_ERR(err, "inflate");
+
+    d_stream.avail_in = BUFLEN-2; /* let inflate read all compressed data */
+    err = inflateSync(&d_stream); /* skip the damaged part */
+    CHECK_ERR(err, "inflateSync");
+
+    err = inflate(&d_stream, Z_FINISH);
+    if (err != Z_DATA_ERROR) {
+        fprintf(stderr, "inflate should report DATA_ERROR\n");
+	/* Because of incorrect adler32 */
+    }
+    err = inflateEnd(&d_stream);
+    CHECK_ERR(err, "inflateEnd");
+
+    printf("after inflateSync(): hel%s\n", uncompr);
+}
+
 /* ===========================================================================
 * Usage:  example [output.gz  [input.gz]]
 */
@@ -204,8 +281,10 @@ void main(argc, argv)
 	      (argc > 2 ? argv[2] : "foo.gz"));

    test_deflate(compr);
-
    test_inflate(compr);

+    test_flush(compr);
+    test_sync(compr);
+
    exit(0);
 }
--- a/gzio.c
+++ b/gzio.c
@@ -3,7 +3,7 @@
 * For conditions of distribution and use, see copyright notice in zlib.h
 */

-/* $Id: gzio.c,v 1.5 1995/04/29 17:13:56 jloup Exp $ */
+/* $Id: gzio.c,v 1.7 1995/05/02 12:22:08 jloup Exp $ */

 #include <stdio.h>

@@ -128,7 +128,7 @@ local gzFile gz_open (path, mode, fd)
    
    if (s->mode == 'w') {
 	err = deflateInit2(&(s->stream), Z_DEFAULT_COMPRESSION,
-			   DEFLATED, -WBITS, MEM_LEVEL, 0);
+			   DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, 0);
 	/* windowBits is passed < 0 to suppress zlib header */

 	s->stream.next_out = s->outbuf = ALLOC(Z_BUFSIZE);
@@ -137,7 +137,7 @@ local gzFile gz_open (path, mode, fd)
 	    return destroy(s), (gzFile)Z_NULL;
 	}
    } else {
-	err = inflateInit2(&(s->stream), -WBITS);
+	err = inflateInit2(&(s->stream), -MAX_WBITS);
 	s->stream.next_in  = s->inbuf = ALLOC(Z_BUFSIZE);

 	if (err != Z_OK || s->inbuf == Z_NULL) {
@@ -221,7 +221,7 @@ gzFile gzdopen (fd, mode)
    char *mode;
 {
    char name[20];
-    sprintf(name, "_fd:%d_", fd); /* for debugging */
+    sprintf(name, "<fd:%d>", fd); /* for debugging */

    return gz_open (name, mode, fd);
 }
@@ -249,7 +249,7 @@ int gzread (file, buf, len)
 	    len--; n++;
 	}
 	if (len == 0) return n;
-	return n + fread(buf, 1, len, s->file);
+	return n + fread(b, 1, len, s->file);
    }
    if (s->z_err == Z_DATA_ERROR) return -1; /* bad .gz file */
    if (s->z_err == Z_STREAM_END) return 0;  /* don't read crc as data */
--- a/infblock.c
+++ b/infblock.c
@@ -60,6 +60,28 @@ local uInt border[] = {	/* Order of the bit length code lengths */
      the two sets of lengths.
 */

+
+void inflate_blocks_reset(s, z, c)
+struct inflate_blocks_state *s;
+z_stream *z;
+uLong *c;
+{
+  if (s->checkfn != Z_NULL)
+    *c = s->check;
+  if (s->mode == BTREE || s->mode == DTREE)
+    ZFREE(z, s->sub.trees.blens);
+  if (s->mode == CODES)
+    inflate_codes_free(s->sub.codes, z);
+  s->mode = TYPE;
+  s->bitk = 0;
+  s->bitb = 0;
+  s->read = s->write = s->window;
+  if (s->checkfn != Z_NULL)
+    s->check = (*s->checkfn)(0L, Z_NULL, 0);
+  Trace((stderr, "inflate:   blocks reset\n"));
+}
+
+
 struct inflate_blocks_state *inflate_blocks_new(z, c, w)
 z_stream *z;
 check_func c;
@@ -75,13 +97,11 @@ uInt w;
    ZFREE(z, s);
    return Z_NULL;
  }
-  s->mode = TYPE;
-  s->bitk = 0;
-  s->read = s->write = s->window;
  s->end = s->window + w;
  s->checkfn = c;
-  if (s->checkfn != Z_NULL)
-    s->check = (*s->checkfn)(0L, Z_NULL, 0);
+  s->mode = TYPE;
+  Trace((stderr, "inflate:   blocks allocated\n"));
+  inflate_blocks_reset(s, z, &s->check);
  return s;
 }

@@ -112,12 +132,16 @@ int r;
      switch (t >> 1)
      {
        case 0:				/* stored */
+	  Trace((stderr, "inflate:     stored block%s\n",
+		 s->last ? " (last)" : ""));
 	  DUMPBITS(3)
 	  t = k & 7;			/* go to byte boundary */
 	  DUMPBITS(t)
 	  s->mode = LENS;		/* get length of stored block */
 	  break;
 	case 1:				/* fixed */
+	  Trace((stderr, "inflate:     fixed codes block%s\n",
+		 s->last ? " (last)" : ""));
 	  {
 	    uInt bl, bd;
 	    inflate_huft *tl, *td;
@@ -134,12 +158,14 @@ int r;
 	  s->mode = CODES;
 	  break;
 	case 2:				/* dynamic */
+	  Trace((stderr, "inflate:     dynamic codes block%s\n",
+		 s->last ? " (last)" : ""));
 	  DUMPBITS(3)
 	  s->mode = TABLE;
 	  break;
 	case 3:				/* illegal */
 	  DUMPBITS(3)
-	  s->mode = INF_ERROR;
+	  s->mode = BAD;
 	  z->msg = "invalid block type";
 	  r = Z_DATA_ERROR;
 	  LEAVE
@@ -149,13 +175,14 @@ int r;
      NEEDBITS(32)
      if ((~b) >> 16 != (b & 0xffff))
      {
-        s->mode = INF_ERROR;
+        s->mode = BAD;
 	z->msg = "invalid stored block lengths";
 	r = Z_DATA_ERROR;
 	LEAVE
      }
      k = 0;				/* dump bits */
      s->sub.left = (uInt)b & 0xffff;
+      Tracev((stderr, "inflate:       stored length %u\n", s->sub.left));
      s->mode = s->sub.left ? STORED : TYPE;
      break;
    case STORED:
@@ -164,6 +191,9 @@ int r;
 	NEEDOUT
 	OUTBYTE(NEXTBYTE)
      } while (--s->sub.left);
+      Tracev((stderr, "inflate:       stored end, %lu total out\n",
+	      z->total_out + (q >= s->read ? q - s->read :
+	      (s->end - s->read) + (q - s->window))));
      s->mode = s->last ? DRY : TYPE;
      break;
    case TABLE:
@@ -172,7 +202,7 @@ int r;
 #ifndef PKZIP_BUG_WORKAROUND
      if ((t & 0x1f) > 29 || ((t >> 5) & 0x1f) > 29)
      {
-        s->mode = INF_ERROR;
+        s->mode = BAD;
        z->msg = "too many length or distance symbols";
 	r = Z_DATA_ERROR;
 	LEAVE
@@ -188,6 +218,7 @@ int r;
      }
      DUMPBITS(14)
      s->sub.trees.index = 0;
+      Tracev((stderr, "inflate:       table sizes ok\n"));
      s->mode = BTREE;
    case BTREE:
      while (s->sub.trees.index < 4 + (s->sub.trees.table >> 10))
@@ -205,10 +236,11 @@ int r;
      {
        r = t;
 	if (r == Z_DATA_ERROR)
-	  s->mode = INF_ERROR;
+	  s->mode = BAD;
 	LEAVE
      }
      s->sub.trees.index = 0;
+      Tracev((stderr, "inflate:       bits tree ok\n"));
      s->mode = DTREE;
    case DTREE:
      while (t = s->sub.trees.table,
@@ -240,7 +272,7 @@ int r;
 	  if (i + j > 258 + (t & 0x1f) + ((t >> 5) & 0x1f) ||
 	      (c == 16 && i < 1))
 	  {
-	    s->mode = INF_ERROR;
+	    s->mode = BAD;
 	    z->msg = "invalid bit length repeat";
 	    r = Z_DATA_ERROR;
 	    LEAVE
@@ -267,10 +299,11 @@ int r;
 	if (t != Z_OK)
 	{
 	  if (t == (uInt)Z_DATA_ERROR)
-	    s->mode = INF_ERROR;
+	    s->mode = BAD;
 	  r = t;
 	  LEAVE
 	}
+        Tracev((stderr, "inflate:       trees ok\n"));
 	if ((c = inflate_codes_new(bl, bd, tl, td, z)) == Z_NULL)
 	{
 	  inflate_trees_free(td, z);
@@ -289,6 +322,9 @@ int r;
      r = Z_OK;
      inflate_codes_free(s->sub.codes, z);
      LOAD
+      Tracev((stderr, "inflate:       codes end, %lu total out\n",
+	      z->total_out + (q >= s->read ? q - s->read :
+	      (s->end - s->read) + (q - s->window))));
      if (!s->last)
      {
        s->mode = TYPE;
@@ -310,7 +346,7 @@ int r;
    case DONE:
      r = Z_STREAM_END;
      LEAVE
-    case INF_ERROR:
+    case BAD:
      r = Z_DATA_ERROR;
      LEAVE
    default:
@@ -325,13 +361,9 @@ struct inflate_blocks_state *s;
 z_stream *z;
 uLong *c;
 {
-  if (s->checkfn != Z_NULL)
-    *c = s->check;
-  if (s->mode == BTREE || s->mode == DTREE)
-    ZFREE(z, s->sub.trees.blens);
-  if (s->mode == CODES)
-    inflate_codes_free(s->sub.codes, z);
+  inflate_blocks_reset(s, z, c);
  ZFREE(z, s->window);
  ZFREE(z, s);
+  Trace((stderr, "inflate:   blocks freed\n"));
  return Z_OK;
 }
--- a/infblock.h
+++ b/infblock.h
@@ -11,15 +11,20 @@
 struct inflate_blocks_state;

 extern struct inflate_blocks_state * inflate_blocks_new __P((
-    z_stream *z,
-    check_func c,               /* check function */
-    uInt w));                   /* window size */
+    z_stream *,
+    check_func,                 /* check function */
+    uInt));                     /* window size */

 extern int inflate_blocks __P((
    struct inflate_blocks_state *,
    z_stream *,
    int));			/* initial return code */

+extern void inflate_blocks_reset __P((
+    struct inflate_blocks_state *,
+    z_stream *,
+    uLong *));                  /* check value on output */
+
 extern int inflate_blocks_free __P((
    struct inflate_blocks_state *,
    z_stream *,
--- a/infcodes.c
+++ b/infcodes.c
@@ -29,7 +29,7 @@ struct inflate_codes_state {
      LIT,	/* o: got literal, waiting for output space */
      WASH,	/* o: got eob, possibly still output waiting */
      END,	/* x: got eob and all data flushed */
-      BAD}	/* x: got error */
+      BADCODE}	/* x: got error */
    mode;		/* current inflate_codes mode */

  /* mode dependent information */
@@ -70,6 +70,7 @@ z_stream *z;
    c->dbits = (Byte)bd;
    c->ltree = tl;
    c->dtree = td;
+    Tracev((stderr, "inflate:       codes new\n"));
  }
  return c;
 }
@@ -107,7 +108,7 @@ int r;
 	LOAD
 	if (r != Z_OK)
 	{
-	  c->mode = r == Z_STREAM_END ? WASH : BAD;
+	  c->mode = r == Z_STREAM_END ? WASH : BADCODE;
 	  break;
 	}
      }
@@ -124,7 +125,7 @@ int r;
      {
        if (e == -128)		/* invalid code */
 	{
-	  c->mode = BAD;
+	  c->mode = BADCODE;
 	  z->msg = "invalid literal/length code";
 	  r = Z_DATA_ERROR;
 	  LEAVE
@@ -132,6 +133,7 @@ int r;
 	e = -e;
 	if (e & 64)		/* end of block */
 	{
+	  Tracevv((stderr, "inflate:         end of block\n"));
 	  c->mode = WASH;
 	  break;
 	}
@@ -142,6 +144,9 @@ int r;
      if (e & 16)		/* literal */
      {
 	c->sub.lit = t->base;
+	Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
+		 "inflate:         literal '%c'\n" :
+		 "inflate:         literal 0x%02x\n", t->base));
 	c->mode = LIT;
 	break;
      }
@@ -155,6 +160,7 @@ int r;
      DUMPBITS(j)
      c->sub.code.need = c->dbits;
      c->sub.code.tree = c->dtree;
+      Tracevv((stderr, "inflate:         length %u\n", c->len));
      c->mode = DIST;
    case DIST:		/* i: get distance next */
      j = c->sub.code.need;
@@ -165,7 +171,7 @@ int r;
      {
        if (e == -128)
 	{
-	  c->mode = BAD;
+	  c->mode = BADCODE;
 	  z->msg = "invalid distance code";
 	  r = Z_DATA_ERROR;
 	  LEAVE
@@ -182,6 +188,7 @@ int r;
      NEEDBITS(j)
      c->sub.copy.dist += (uInt)b & inflate_mask[j];
      DUMPBITS(j)
+      Tracevv((stderr, "inflate:         distance %u\n", c->sub.copy.dist));
      c->mode = COPY;
    case COPY:		/* o: copying bytes in window, waiting for space */
      f = (uInt)(q - s->window) < c->sub.copy.dist ?
@@ -210,7 +217,7 @@ int r;
    case END:
      r = Z_STREAM_END;
      LEAVE
-    case BAD:		/* x: got error */
+    case BADCODE:	/* x: got error */
      r = Z_DATA_ERROR;
      LEAVE
    default:
@@ -227,4 +234,5 @@ z_stream *z;
  inflate_trees_free(c->dtree, z);
  inflate_trees_free(c->ltree, z);
  ZFREE(z, c);
+  Tracev((stderr, "inflate:       codes free\n"));
 }
--- a/inffast.c
+++ b/inffast.c
@@ -73,6 +73,7 @@ z_stream *z;
 	e = -e;
 	if (e & 64)		/* end of block */
 	{
+	  Tracevv((stderr, "inflate:         * end of block\n"));
          UNGRAB
 	  UPDATE
 	  return Z_STREAM_END;
@@ -83,6 +84,9 @@ z_stream *z;
    /* process literal or length (end of block already trapped) */
    if (e & 16)			/* then it's a literal */
    {
+      Tracevv((stderr, t->base >= 0x20 && t->base < 0x7f ?
+		"inflate:         * literal '%c'\n" :
+		"inflate:         * literal 0x%02x\n", t->base));
      *q++ = (Byte)t->base;
      m--;
    }
@@ -91,6 +95,7 @@ z_stream *z;
      /* get length of block to copy (already have extra bits) */
      c = t->base + ((uInt)b & inflate_mask[e]);
      DUMPBITS(e);
+      Tracevv((stderr, "inflate:         * length %u\n", c));

      /* decode distance base of block to copy */
      GRABBITS(15);		/* max bits for distance code */
@@ -109,13 +114,14 @@ z_stream *z;
      DUMPBITS(t->bits)

      /* get extra bits to add to distance base */
-      GRABBITS(e)           /* get extra bits (up to 13) */
+      GRABBITS((uInt)e)		/* get extra bits (up to 13) */
      d = t->base + ((uInt)b & inflate_mask[e]);
      DUMPBITS(e)
+      Tracevv((stderr, "inflate:         * distance %u\n", d));

      /* do the copy */
      m -= c;
-      if (q - s->window >= d)		/* if offset before destination, */
+      if ((uInt)(q - s->window) >= d)	/* if offset before destination, */
      {					/*  just copy */
 	r = q - d;
 	*q++ = *r++;  c--;		/* minimum count is three, */
@@ -128,7 +134,7 @@ z_stream *z;
      {
 	e = d - (q - s->window);	/* bytes from offset to end */
 	r = s->end - e;			/* pointer to offset */
-	if (c > e)			/* if source crosses, */
+	if (c > (uInt)e)		/* if source crosses, */
 	{
 	  c -= e;			/* copy to end of window */
 	  do {
--- a/inflate.c
+++ b/inflate.c
@@ -15,38 +15,63 @@ struct internal_state {
  enum {
      METHOD,	/* waiting for method byte */
      FLAG,	/* waiting for flag byte */
-      START,	/* make new blocks state */
      BLOCKS,	/* decompressing blocks */
      CHECK4,	/* four check bytes to go */
      CHECK3,	/* three check bytes to go */
      CHECK2,	/* two check bytes to go */
      CHECK1,	/* one check byte to go */
      DONE,	/* finished check, done */
-      INF_ERROR}/* got an error--stay here */
+      BAD}	/* got an error--stay here */
    mode;		/* current inflate mode */

  /* mode dependent information */
  union {
    uInt method;	/* if FLAGS, method byte */
-    struct inflate_blocks_state
-      *blocks;		/* if BLOCKS, current state */
    struct {
      uLong was;                /* computed check value */
      uLong need;               /* stream check value */
    } check;            /* if CHECK, check values to compare */
+    uInt marker;	/* if BAD, inflateSync's marker bytes count */
  } sub;	/* submode */

  /* mode independent information */
  int  nowrap;		/* flag for no wrapper */
  uInt wbits;  		/* log2(window size)  (8..15, defaults to 15) */
+  struct inflate_blocks_state
+    *blocks;		/* current inflate_blocks state */

 };


-int inflateInit(z)
+int inflateReset(z)
 z_stream *z;
 {
-    return inflateInit2(z, WBITS);
+  uLong c;
+
+  if (z == Z_NULL || z->state == Z_NULL)
+    return Z_STREAM_ERROR;
+  z->total_in = z->total_out = 0;
+  z->msg = Z_NULL;
+  z->state->mode = z->state->nowrap ? BLOCKS : METHOD;
+  inflate_blocks_reset(z->state->blocks, z, &c);
+  Trace((stderr, "inflate: reset\n"));
+  return Z_OK;
+}
+
+
+int inflateEnd(z)
+z_stream *z;
+{
+  uLong c;
+
+  if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)
+    return Z_STREAM_ERROR;
+  if (z->state->blocks != Z_NULL)
+    inflate_blocks_free(z->state->blocks, z, &c);
+  ZFREE(z, z->state);
+  z->state = Z_NULL;
+  Trace((stderr, "inflate: end\n"));
+  return Z_OK;
 }


@@ -59,12 +84,10 @@ int w;
    return Z_STREAM_ERROR;
  if (z->zalloc == Z_NULL) z->zalloc = zcalloc;
  if (z->zfree == Z_NULL) z->zfree = zcfree;
-  z->total_in = z->total_out = 0;
-  z->msg = Z_NULL;
  if ((z->state = (struct internal_state *)
       ZALLOC(z,1,sizeof(struct internal_state))) == Z_NULL)
    return Z_MEM_ERROR;
-  z->state->mode = METHOD;
+  z->state->blocks = Z_NULL;

  /* handle undocumented nowrap option (no zlib header or check) */
  z->state->nowrap = 0;
@@ -72,7 +95,6 @@ int w;
  {
    w = - w;
    z->state->nowrap = 1;
-    z->state->mode = START;
  }

  /* set window size */
@@ -81,11 +103,32 @@ int w;
    inflateEnd(z);
    return Z_STREAM_ERROR;
  }
-  z->state->wbits = w;
+  z->state->wbits = (uInt)w;
+
+  /* create inflate_blocks state */
+  if ((z->state->blocks =
+       inflate_blocks_new(z, z->state->nowrap ? Z_NULL : adler32, 1 << w))
+      == Z_NULL)
+  {
+    inflateEnd(z);
+    return Z_MEM_ERROR;
+  }
+  Trace((stderr, "inflate: allocated\n"));
+
+  /* reset state */
+  inflateReset(z);
  return Z_OK;
 }


+int inflateInit(z)
+z_stream *z;
+{
+  return inflateInit2(z, DEF_WBITS);
+}
+
+
+#define NEEDBYTE {if(z->avail_in==0)return r;r=Z_OK;}
 #define NEXTBYTE (z->avail_in--,z->total_in++,*z->next_in++)

 int inflate(z, f)
@@ -94,7 +137,6 @@ int f;
 {
  int r = f;	/* to avoid warning about unused f */
  uInt b;
-  uLong c;

  if (z == Z_NULL || z->next_in == Z_NULL)
    return Z_STREAM_ERROR;
@@ -102,77 +144,86 @@ int f;
  while (1) switch (z->state->mode)
  {
    case METHOD:
-      if (z->avail_in == 0) return r;  r = Z_OK;
-      if (((z->state->sub.method = NEXTBYTE) & 0xf != DEFLATED))
+      NEEDBYTE
+      if (((z->state->sub.method = NEXTBYTE) & 0xf) != DEFLATED)
      {
-        z->state->mode = INF_ERROR;
+        z->state->mode = BAD;
 	z->msg = "unknown compression method";
-	return Z_DATA_ERROR;
+	z->state->sub.marker = 5;	/* can't try inflateSync */
+	break;
      }
      if ((z->state->sub.method >> 4) + 8 > z->state->wbits)
      {
-        z->state->mode = INF_ERROR;
+        z->state->mode = BAD;
 	z->msg = "invalid window size";
-	return Z_DATA_ERROR;
+	z->state->sub.marker = 5;	/* can't try inflateSync */
+	break;
      }
      z->state->mode = FLAG;
    case FLAG:
-      if (z->avail_in == 0) return r;  r = Z_OK;
+      NEEDBYTE
      if ((b = NEXTBYTE) & 0x20)
      {
-        z->state->mode = INF_ERROR;
+        z->state->mode = BAD;
 	z->msg = "invalid reserved bit";
-	return Z_DATA_ERROR;
+	z->state->sub.marker = 5;	/* can't try inflateSync */
+	break;
      }
      if (((z->state->sub.method << 8) + b) % 31)
      {
-        z->state->mode = INF_ERROR;
+        z->state->mode = BAD;
 	z->msg = "incorrect header check";
-	return Z_DATA_ERROR;
+	z->state->sub.marker = 5;	/* can't try inflateSync */
+	break;
      }
-      z->state->mode = START;
-    case START:
-      if ((z->state->sub.blocks = inflate_blocks_new(z,
-         z->state->nowrap ? Z_NULL : adler32,
-         1<< z->state->wbits)) == Z_NULL)
-        return Z_MEM_ERROR;
+      Trace((stderr, "inflate: zlib header ok\n"));
      z->state->mode = BLOCKS;
    case BLOCKS:
-      if ((r = inflate_blocks(z->state->sub.blocks, z, r)) != Z_STREAM_END)
+      r = inflate_blocks(z->state->blocks, z, r);
+      if (r == Z_DATA_ERROR)
+      {
+        z->state->mode = BAD;
+	z->state->sub.marker = 0;	/* can try inflateSync */
+	break;
+      }
+      if (r != Z_STREAM_END)
 	return r;
-      inflate_blocks_free(z->state->sub.blocks, z, &c);
+      r = Z_OK;
+      inflate_blocks_reset(z->state->blocks, z, &z->state->sub.check.was);
      if (z->state->nowrap)
      {
 	z->state->mode = DONE;
 	break;
      }
-      z->state->sub.check.was = c;
      z->state->mode = CHECK4;
    case CHECK4:
-      if (z->avail_in == 0) return r;  r = Z_OK;
+      NEEDBYTE
      z->state->sub.check.need = (uLong)NEXTBYTE << 24;
      z->state->mode = CHECK3;
    case CHECK3:
-      if (z->avail_in == 0) return r;  r = Z_OK;
+      NEEDBYTE
      z->state->sub.check.need += (uLong)NEXTBYTE << 16;
      z->state->mode = CHECK2;
    case CHECK2:
-      if (z->avail_in == 0) return r;  r = Z_OK;
+      NEEDBYTE
      z->state->sub.check.need += (uLong)NEXTBYTE << 8;
      z->state->mode = CHECK1;
    case CHECK1:
-      if (z->avail_in == 0) return r;  r = Z_OK;
+      NEEDBYTE
      z->state->sub.check.need += (uLong)NEXTBYTE;
+
      if (z->state->sub.check.was != z->state->sub.check.need)
      {
-        z->state->mode = INF_ERROR;
+        z->state->mode = BAD;
        z->msg = "incorrect data check";
-	return Z_DATA_ERROR;
+	z->state->sub.marker = 5;	/* can't try inflateSync */
+	break;
      }
+      Trace((stderr, "inflate: zlib check ok\n"));
      z->state->mode = DONE;
    case DONE:
      return Z_STREAM_END;
-    case INF_ERROR:
+    case BAD:
      return Z_DATA_ERROR;
    default:
      return Z_STREAM_ERROR;
@@ -180,41 +231,51 @@ int f;
 }


-int inflateEnd(z)
-z_stream *z;
-{
-  uLong c;
-
-  if (z == Z_NULL || z->state == Z_NULL || z->zfree == Z_NULL)
-    return Z_STREAM_ERROR;
-  if (z->state->mode == BLOCKS)
-    inflate_blocks_free(z->state->sub.blocks, z, &c);
-  ZFREE(z, z->state);
-  z->state = Z_NULL;
-  return Z_OK;
-}
-
-
-/* inflateSync not implemented yet--this just consumes input */
 int inflateSync(z)
 z_stream *z;
 {
-  if (z == Z_NULL) return Z_STREAM_ERROR;
-  if (z->avail_in == 0) return Z_BUF_ERROR;
-  do {
-    z->total_in++;
-  } while (--z->avail_in);
+  uInt n;	/* number of bytes to look at */
+  Byte *p;	/* pointer to bytes */
+  uInt m;	/* number of marker bytes found in a row */
+  uLong r, w;	/* temporaries to save total_in and total_out */
+
+  /* set up */
+  if (z == Z_NULL || z->state == Z_NULL)
+    return Z_STREAM_ERROR;
+  if (z->state->mode != BAD)
+  {
+    z->state->mode = BAD;
+    z->state->sub.marker = 0;
+  }
+  if ((n = z->avail_in) == 0)
+    return Z_BUF_ERROR;
+  p = z->next_in;
+  m = z->state->sub.marker;
+
+  /* search */
+  while (n && m < 4)
+  {
+    if (*p == (Byte)(m < 2 ? 0 : 0xff))
+      m++;
+    else if (*p)
+      m = 0;
+    else
+      m = 4 - m;
+    p++, n--;
+  }
+
+  /* restore */
+  z->total_in += p - z->next_in;
+  z->next_in = p;
+  z->avail_in = n;
+  z->state->sub.marker = m;
+
+  /* return no joy or set up to restart on a new block */
+  if (m != 4)
    return Z_DATA_ERROR;
-}
-
-
-/* inflateReset not fully implemented yet--this frees and reallocates */
-int inflateReset(z)
-z_stream *z;
-{
-  int r;
-
-  if ((r = inflateEnd(z)) != Z_OK)
-    return r;
-  return inflateInit(z);
+  r = z->total_in;  w = z->total_out;
+  inflateReset(z);
+  z->total_in = r;  z->total_out = w;
+  z->state->mode = BLOCKS;
+  return Z_OK;
 }
--- a/infutil.c
+++ b/infutil.c
@@ -44,7 +44,9 @@ int r;
    s->check = (*s->checkfn)(s->check, q, n);

  /* copy as far as end of window */
-  while (n--) *p++ = *q++;
+  zmemcpy(p, q, n);
+  p += n;
+  q += n;

  /* see if more to copy at beginning of window */
  if (q == s->end)
@@ -68,7 +70,9 @@ int r;
      s->check = (*s->checkfn)(s->check, q, n);

    /* copy */
-    while (n--) *p++ = *q++;
+    zmemcpy(p, q, n);
+    p += n;
+    q += n;
  }

  /* update pointers */
--- a/infutil.h
+++ b/infutil.h
@@ -22,7 +22,7 @@ struct inflate_blocks_state {
      CODES,	/* processing fixed or dynamic block */
      DRY,	/* output remaining window bytes */
      DONE,	/* finished last block, done */
-      INF_ERROR}/* got a data error--stuck here */
+      BAD}	/* got a data error--stuck here */
    mode;		/* current inflate_block mode */

  /* mode dependent information */
@@ -63,13 +63,7 @@ struct inflate_blocks_state {
 #define LOADIN {p=z->next_in;n=z->avail_in;b=s->bitb;k=s->bitk;}
 #define NEEDBYTE {if(n)r=Z_OK;else LEAVE}
 #define NEXTBYTE (n--,*p++)
-#ifdef __TURBOC__ /* bug in TurboC compiler, bad code for b << 0 */
-#  define NEEDBITS(j) {\
-  while(k<(j)){NEEDBYTE;b=k?b|(((uLong)NEXTBYTE)<<k):NEXTBYTE;k+=8;}\
-}
-#else
-#  define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}}
-#endif
+#define NEEDBITS(j) {while(k<(j)){NEEDBYTE;b|=((uLong)NEXTBYTE)<<k;k+=8;}}
 #define DUMPBITS(j) {b>>=(j);k-=(j);}
 /*   output bytes */
 #define WAVAIL (q<s->read?s->read-q-1:s->end-q)
--- a/minigzip.c
+++ b/minigzip.c
@@ -13,12 +13,14 @@
 * or in pipe mode.
 */

-/* $Id: minigzip.c,v 1.3 1995/04/29 14:27:21 jloup Exp $ */
+/* $Id: minigzip.c,v 1.4 1995/05/02 15:54:22 jloup Exp $ */

 #include <stdio.h>
 #include "zlib.h"

+#ifndef __GO32__
 extern void exit  __P((int));
+#endif
 extern int unlink __P((const char *));

 #ifdef STDC
--- a/trees.c
+++ b/trees.c
@@ -29,7 +29,7 @@
 *          Addison-Wesley, 1983. ISBN 0-201-06672-6.
 */

-/* $Id: trees.c,v 1.3 1995/04/29 13:49:46 jloup Exp $ */
+/* $Id: trees.c,v 1.4 1995/05/01 16:53:44 jloup Exp $ */

 #include "deflate.h"

@@ -722,6 +722,22 @@ local void send_all_trees(s, lcodes, dcodes, blcodes)
    Tracev((stderr, "\ndist tree: sent %ld", s->bits_sent));
 }

+/* ===========================================================================
+ * Send a stored block
+ */
+void ct_stored_block(s, buf, stored_len, eof)
+    deflate_state *s;
+    char *buf;        /* input block */
+    ulg stored_len;   /* length of input block */
+    int eof;          /* true if this is the last block for a file */
+{
+    send_bits(s, (STORED_BLOCK<<1)+eof, 3);  /* send block type */
+    s->compressed_len = (s->compressed_len + 3 + 7) & ~7L;
+    s->compressed_len += (stored_len + 4) << 3;
+
+    copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
+}
+
 /* ===========================================================================
 * Determine the best encoding for the current block: dynamic trees, static
 * trees or store, and output the encoded block to the zip file. This function
@@ -771,8 +787,8 @@ ulg ct_flush_block(s, buf, stored_len, eof)
     * the whole file is transformed into a stored file:
     */
 #ifdef STORED_FILE_OK
-#  ifdef FORCE_METHOD
-    if (level == 1 && eof && compressed_len == 0L) { /* force stored file */
+#  ifdef FORCE_STORED_FILE
+    if (eof && compressed_len == 0L) { /* force stored file */
 #  else
    if (stored_len <= opt_lenb && eof && s->compressed_len==0L && seekable()) {
 #  endif
@@ -785,8 +801,8 @@ ulg ct_flush_block(s, buf, stored_len, eof)
    } else
 #endif /* STORED_FILE_OK */

-#ifdef FORCE_METHOD
-    if (level == 2 && buf != (char*)0) { /* force stored block */
+#ifdef FORCE_STORED
+    if (buf != (char*)0) { /* force stored block */
 #else
    if (stored_len+4 <= opt_lenb && buf != (char*)0) {
                       /* 4: two words for the lengths */
@@ -797,14 +813,10 @@ ulg ct_flush_block(s, buf, stored_len, eof)
         * successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
         * transform a block into a stored block.
         */
-        send_bits(s, (STORED_BLOCK<<1)+eof, 3);  /* send block type */
-        s->compressed_len = (s->compressed_len + 3 + 7) & ~7L;
-        s->compressed_len += (stored_len + 4) << 3;
+	ct_stored_block(s, buf, stored_len, eof);

-        copy_block(s, buf, (unsigned)stored_len, 1); /* with header */
-
-#ifdef FORCE_METHOD
-    } else if (level == 3) { /* force static trees */
+#ifdef FORCE_STATIC
+    } else if (static_lenb >= 0) { /* force static trees */
 #else
    } else if (static_lenb == opt_lenb) {
 #endif
--- a/zconf.h
+++ b/zconf.h
@@ -3,7 +3,7 @@
 * For conditions of distribution and use, see copyright notice in zlib.h 
 */

-/* $Id: zconf.h,v 1.9 1995/04/29 12:02:14 jloup Exp $ */
+/* $Id: zconf.h,v 1.11 1995/05/02 13:07:21 jloup Exp $ */

 #ifndef _ZCONF_H
 #define _ZCONF_H
@@ -32,12 +32,33 @@
 #  define STDC
 #endif

-#ifdef MAXSEG_64K
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+#  ifdef MAXSEG_64K
 #    define MAX_MEM_LEVEL 8
-#else
+#  else
 #    define MAX_MEM_LEVEL 9
+#  endif
 #endif

+/* Maximum value for windowBits in deflateInit2 and inflateInit2 */
+#ifndef MAX_WBITS
+#  define MAX_WBITS   15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+            1 << (windowBits+2)   +  1 << (memLevel+9)
+ that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+   The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ for small objects.
+*/
+
 			/* Type declarations */

 #ifndef __P /* function prototypes */
@@ -52,7 +73,7 @@
  typedef unsigned char  Byte;  /* 8 bits */
 #endif
 #ifndef uInt
-  typedef unsigned int   uInt;  /* may be 16 or 32 bits */
+  typedef unsigned int   uInt;  /* 16 bits or more */
 #endif
 #ifndef uLong
  typedef unsigned long  uLong; /* 32 bits or more */
--- a/zlib.h
+++ b/zlib.h
@@ -1,5 +1,5 @@
 /* zlib.h -- interface of the 'zlib' general purpose compression library
-  version 0.8 April 29th, 1995.
+  version 0.91 May 2nd, 1995.

  Copyright (C) 1995 Jean-loup Gailly and Mark Adler

@@ -28,7 +28,7 @@

 #include "zconf.h"

-#define ZLIB_VERSION "0.8"
+#define ZLIB_VERSION "0.91"

 /* 
     The 'zlib' compression library provides in-memory compression and
@@ -81,7 +81,7 @@ typedef struct z_stream_s {
   opaque before calling the init function. All other fields are set by the
   compression library and must not be updated by the application.

-   The opaque value provided by the application will be passed as first
+   The opaque value provided by the application will be passed as the first
   parameter for calls of zalloc and zfree. This can be useful for custom
   memory management. The compression library attaches no meaning to the
   opaque value.
@@ -89,7 +89,12 @@ typedef struct z_stream_s {
   zalloc must return Z_NULL if there is not enough memory for the object.
   On 16-bit systems, the functions zalloc and zfree must be able to allocate
   exactly 65536 bytes, but will not be required to allocate more than this
-   if the symbol MAXSEG_64K is defined (see zconf.h).
+   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
+   pointers returned by zalloc for objects of exactly 65536 bytes *must*
+   have their offset normalized to zero. The default allocation function
+   provided by this library ensures this (see zutil.c). To reduce memory
+   requirements and avoid any allocation of 64K objects, at the expense of
+   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).

   The fields total_in and total_out can be used for statistics or
   progress reports. After compression, total_in holds the total size of
@@ -265,7 +270,7 @@ extern int inflate __P((z_stream *strm, int flush));

    If the parameter flush is set to Z_PARTIAL_FLUSH, inflate flushes as much
  output as possible to the output buffer. The flushing behavior of inflate is
-  not specified for values of the flush paramater other than Z_PARTIAL_FLUSH
+  not specified for values of the flush parameter other than Z_PARTIAL_FLUSH
  and Z_FINISH, but the current implementation actually flushes as much output
  as possible anyway.

@@ -330,7 +335,8 @@ extern int deflateInit2 __P((z_stream *strm,
    The memLevel parameter specifies how much memory should be allocated
   for the internal compression state. memLevel=1 uses minimum memory but
   is slow and reduces compression ratio; memLevel=9 uses maximum memory
-   for optimal speed. The default value is 8.
+   for optimal speed. The default value is 8. See zconf.h for total memory
+   usage as a function of windowBits and memLevel.

     The strategy parameter is used to tune the compression algorithm. Use
   the value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data
@@ -367,7 +373,7 @@ extern int deflateCopy __P((z_stream *dest,
     Sets the destination stream as a complete copy of the source stream.  If
   the source stream is using an application-supplied history buffer, a new
   buffer is allocated for the destination stream.  The compressed output
-   buffer is always application-supplied. It's the responsability of the
+   buffer is always application-supplied. It's the responsibility of the
   application to provide the correct values of next_out and avail_out for the
   next call of deflate.

@@ -430,12 +436,13 @@ extern int inflateInit2 __P((z_stream *strm,

 extern int inflateSync __P((z_stream *strm));
 /* 
-    Skips invalid compressed data until the special marker and a valid block
-  can be found, or until all available input is skipped. No output is provided.
+    Skips invalid compressed data until the special marker (see deflate()
+  above) can be found, or until all available input is skipped. No output
+  is provided.

-    inflateSync returns Z_OK if a valid block has been found, Z_BUF_ERROR if
-  no more input was provided, Z_DATA_ERROR if not valid block has been found,
-  Z_STREAM_ERROR if the stream structure was inconsistent. In the success
+    inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR
+  if no more input was provided, Z_DATA_ERROR if no marker has been found,
+  or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
  case, the application may save the current current value of total_in which
  indicates where valid compressed data was found. In the error case, the
  application may repeatedly call inflateSync, providing more input each time,
@@ -469,7 +476,7 @@ extern int compress __P((Byte *dest,   uLong *destLen,
     Compresses the source buffer into the destination buffer.  sourceLen is
   the byte length of the source buffer. Upon entry, destLen is the total
   size of the destination buffer, which must be at least 0.1% larger than
-   sourceLen plus 8 bytes. Upon exit, destLen is the actual size of the
+   sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the
   compressed buffer.
     This function can be used to compress a whole file at once if the
   input file is mmap'ed.
@@ -505,7 +512,7 @@ extern gzFile gzopen  __P((char *path, char *mode));
   is as in fopen ("rb" or "wb"). gzopen can also be used to read a file
   which is not in gzip format; in this case gzread will directly read from
   the file without decompression.
-     gzopen return NULL if the file could not be opened or if there was
+     gzopen returns NULL if the file could not be opened or if there was
   insufficient memory to allocate the (de)compression state; errno
   can be checked to distinguish the two cases (if errno is zero, the
   zlib error is Z_MEM_ERROR).
@@ -516,7 +523,7 @@ extern gzFile gzdopen  __P((int fd, char *mode));
     gzdopen() associates a gzFile with the file descriptor fd.  File
   descriptors are obtained from calls like open, dup, creat, or pipe.
   The mode parameter is as in fopen ("rb" or "wb").
-     gzdopen return NULL if there was insufficient memory to allocate
+     gzdopen returns NULL if there was insufficient memory to allocate
   the (de)compression state.
 */

@@ -574,7 +581,7 @@ extern uLong adler32 __P((uLong adler, Byte *buf, uInt len));
     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
   return the updated checksum. If buf is NULL, this function returns
   the required initial value for the checksum.
-   An Adler-32 cheksum is almost as reliable as a CRC32 but can be computed
+   An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
   much faster. Usage example:

     uLong adler = adler32(0L, Z_NULL, 0);
--- a/zutil.c
+++ b/zutil.c
@@ -3,13 +3,15 @@
 * For conditions of distribution and use, see copyright notice in zlib.h 
 */

-/* $Id: zutil.c,v 1.6 1995/04/29 14:54:02 jloup Exp $ */
+/* $Id: zutil.c,v 1.7 1995/05/02 15:54:47 jloup Exp $ */

 #include <stdio.h>

 #include "zutil.h"

+#ifndef __GO32__
 extern void exit __P((int));
+#endif

 char *zlib_version = ZLIB_VERSION;

@@ -55,8 +57,9 @@ void zmemzero(dest, len)
 }
 #endif

-#if defined(MSDOS) && !defined(__SMALL__) && !defined(M_I86SM)
-#  ifdef __TURBOC__
+#if defined(__TURBOC__) && !defined(__SMALL__)
+
+#  define MY_ZCALLOC

 /* Turbo C malloc() does not allow dynamic allocation of 64K bytes
 * and farmalloc(64K) returns a pointer with an offset of 8, so we
@@ -124,8 +127,11 @@ void  zcfree (voidp opaque, voidp ptr)
    ptr = opaque; /* just to make some compilers happy */
    z_error("zcfree: ptr not found");
 }
+#endif /* __TURBOC__ */

-#  else /* MSC */
+#if defined(M_I86CM) || defined(M_I86LM) /* MSC compact or large model */
+
+#  define MY_ZCALLOC

 #if (!defined(_MSC_VER) || (_MSC_VER < 600))
 #  define _halloc  halloc
@@ -144,12 +150,15 @@ void  zcfree (voidp opaque, voidp ptr)
    _hfree(ptr);
 }

-#  endif /* __TURBOC__ ? */
+#endif /* defined(M_I86CM) || defined(M_I86LM) */

-#else /* !MSDOS */

+#ifndef MY_ZCALLOC /* Any system without a special alloc function */
+
+#ifndef __GO32__
 extern voidp calloc __P((uInt items, uInt size));
 extern void  free   __P((voidp ptr));
+#endif

 voidp zcalloc (opaque, items, size)
    voidp opaque;
@@ -166,4 +175,4 @@ void  zcfree (opaque, ptr)
    free(ptr);
 }

-#endif /* MSDOS */
+#endif /* MY_ZCALLOC */
--- a/zutil.h
+++ b/zutil.h
@@ -8,7 +8,7 @@
   subject to change. Applications should only use zlib.h.
 */

-/* $Id: zutil.h,v 1.6 1995/04/29 15:52:16 jloup Exp $ */
+/* $Id: zutil.h,v 1.8 1995/05/02 15:44:46 jloup Exp $ */

 #ifndef _Z_UTIL_H
 #define _Z_UTIL_H
@@ -17,6 +17,7 @@

 #ifdef MSDOS
 #   include <stddef.h>
+#   include <errno.h>
 #else
    extern int errno;
 #endif
@@ -42,13 +43,15 @@ extern char *z_errmsg[]; /* indexed by 1-zlib_error */

 #define DEFLATED   8

-#ifndef WBITS
-# define WBITS   15 /* 32K window */
-#endif
+#define DEF_WBITS 15
+/* default windowBits for decompression. MAX_WBITS is for compression only */

-#ifndef MEM_LEVEL
-# define MEM_LEVEL  8
+#if MAX_MEM_LEVEL >= 8
+#  define DEF_MEM_LEVEL 8
+#else
+#  define DEF_MEM_LEVEL  MAX_MEM_LEVEL
 #endif
+/* default memLevel */

 #define STORED_BLOCK 0
 #define STATIC_TREES 1
Author	SHA1	Message	Date
Mark Adler	1c71d8b13b	zlib 0.91	2011-09-09 23:07:35 -07:00
Mark Adler	64b2e89203	zlib 0.9	2011-09-09 23:06:52 -07:00