zlib 1.2.5

CMakeLists.txt

@@ -0,0 +1,190 @@
+cmake_minimum_required(VERSION 2.4.4)
+set(CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS ON)
+
+project(zlib C)
+
+if(NOT DEFINED BUILD_SHARED_LIBS)
+    option(BUILD_SHARED_LIBS "Build a shared library form of zlib" ON)
+endif()
+
+include(CheckTypeSize)
+include(CheckFunctionExists)
+include(CheckIncludeFile)
+include(CheckCSourceCompiles)
+enable_testing()
+
+check_include_file(sys/types.h HAVE_SYS_TYPES_H)
+check_include_file(stdint.h    HAVE_STDINT_H)
+check_include_file(stddef.h    HAVE_STDDEF_H)
+
+#
+# Check to see if we have large file support
+#
+set(CMAKE_REQUIRED_DEFINITIONS -D_LARGEFILE64_SOURCE=1)
+# We add these other definitions here because CheckTypeSize.cmake
+# in CMake 2.4.x does not automatically do so and we want
+# compatibility with CMake 2.4.x.
+if(HAVE_SYS_TYPES_H)
+    list(APPEND CMAKE_REQUIRED_DEFINITIONS -DHAVE_SYS_TYPES_H)
+endif()
+if(HAVE_STDINT_H)
+    list(APPEND CMAKE_REQUIRED_DEFINITIONS -DHAVE_STDINT_H)
+endif()
+if(HAVE_STDDEF_H)
+    list(APPEND CMAKE_REQUIRED_DEFINITIONS -DHAVE_STDDEF_H)
+endif()
+check_type_size(off64_t OFF64_T)
+if(HAVE_OFF64_T)
+   add_definitions(-D_LARGEFILE64_SOURCE=1)
+endif()
+set(CMAKE_REQUIRED_DEFINITIONS) # clear variable
+
+#
+# Check for fseeko
+#
+check_function_exists(fseeko HAVE_FSEEKO)
+if(NOT HAVE_FSEEKO)
+    add_definitions(-DNO_FSEEKO)
+endif()
+
+#
+# Check for unistd.h
+#
+check_include_file(unistd.h Z_HAVE_UNISTD_H)
+
+if(MSVC)
+    set(CMAKE_DEBUG_POSTFIX "d")
+    add_definitions(-D_CRT_SECURE_NO_DEPRECATE)
+    add_definitions(-D_CRT_NONSTDC_NO_DEPRECATE)
+endif()
+
+if(NOT CMAKE_CURRENT_SOURCE_DIR STREQUAL CMAKE_CURRENT_BINARY_DIR)
+    # If we're doing an out of source build and the user has a zconf.h
+    # in their source tree...
+    if(EXISTS ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h)
+        message(FATAL_ERROR
+            "You must remove ${CMAKE_CURRENT_SOURCE_DIR}/zconf.h "
+            "from the source tree.  This file is included with zlib "
+            "but CMake generates this file for you automatically "
+            "in the build directory.")
+  endif()
+endif()
+
+configure_file(${CMAKE_CURRENT_SOURCE_DIR}/zconf.h.cmakein
+               ${CMAKE_CURRENT_BINARY_DIR}/zconf.h @ONLY)
+include_directories(${CMAKE_CURRENT_BINARY_DIR})
+
+
+#============================================================================
+# zlib
+#============================================================================
+
+set(ZLIB_PUBLIC_HDRS
+    ${CMAKE_CURRENT_BINARY_DIR}/zconf.h
+    zlib.h
+)
+set(ZLIB_PRIVATE_HDRS
+    crc32.h
+    deflate.h
+    gzguts.h
+    inffast.h
+    inffixed.h
+    inflate.h
+    inftrees.h
+    trees.h
+    zutil.h
+)
+set(ZLIB_SRCS
+    adler32.c
+    compress.c
+    crc32.c
+    deflate.c
+    gzclose.c
+    gzlib.c
+    gzread.c
+    gzwrite.c
+    inflate.c
+    infback.c
+    inftrees.c
+    inffast.c
+    trees.c
+    uncompr.c
+    zutil.c
+    win32/zlib1.rc
+)
+
+# parse the full version number from zlib.h and include in ZLIB_FULL_VERSION
+file(READ ${CMAKE_CURRENT_SOURCE_DIR}/zlib.h _zlib_h_contents)
+string(REGEX REPLACE ".*#define[ \t]+ZLIB_VERSION[ \t]+\"([0-9A-Za-z.]+)\".*"
+    "\\1" ZLIB_FULL_VERSION ${_zlib_h_contents})
+
+if(MINGW)
+    # This gets us DLL resource information when compiling on MinGW.
+    add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/zlib1rc.obj
+                       COMMAND windres.exe
+                            -D GCC_WINDRES
+                            -I ${CMAKE_CURRENT_SOURCE_DIR}
+                            -I ${CMAKE_CURRENT_BINARY_DIR}
+                            -o ${CMAKE_CURRENT_BINARY_DIR}/zlib1rc.obj
+                            -i ${CMAKE_CURRENT_SOURCE_DIR}/win32/zlib1.rc)
+    set(ZLIB_SRCS ${ZLIB_SRCS} ${CMAKE_CURRENT_BINARY_DIR}/zlib1rc.obj)
+endif(MINGW)
+
+add_library(zlib ${ZLIB_SRCS} ${ZLIB_PUBLIC_HDRS} ${ZLIB_PRIVATE_HDRS})
+set_target_properties(zlib PROPERTIES DEFINE_SYMBOL ZLIB_DLL)
+
+set_target_properties(zlib PROPERTIES SOVERSION 1)
+
+if(NOT CYGWIN)
+    # This property causes shared libraries on Linux to have the full version
+    # encoded into their final filename.  We disable this on Cygwin because
+    # it causes cygz-${ZLIB_FULL_VERSION}.dll to be created when cygz.dll
+    # seems to be the default.
+    #
+    # This has no effect with MSVC, on that platform the version info for
+    # the DLL comes from the resource file win32/zlib1.rc
+    set_target_properties(zlib PROPERTIES VERSION ${ZLIB_FULL_VERSION})
+endif()
+
+if(UNIX)
+    # On unix-like platforms the library is almost always called libz
+   set_target_properties(zlib PROPERTIES OUTPUT_NAME z)
+elseif(BUILD_SHARED_LIBS AND WIN32)
+    # Creates zlib1.dll when building shared library version
+    set_target_properties(zlib PROPERTIES SUFFIX "1.dll")
+endif()
+
+if(NOT SKIP_INSTALL_LIBRARIES AND NOT SKIP_INSTALL_ALL )
+    install(TARGETS zlib
+        RUNTIME DESTINATION bin
+        ARCHIVE DESTINATION lib
+        LIBRARY DESTINATION lib )
+endif()
+if(NOT SKIP_INSTALL_HEADERS AND NOT SKIP_INSTALL_ALL )
+    install(FILES ${ZLIB_PUBLIC_HDRS} DESTINATION include)
+endif()
+if(NOT SKIP_INSTALL_FILES AND NOT SKIP_INSTALL_ALL )
+    install(FILES zlib.3 DESTINATION share/man/man3)
+endif()
+
+#============================================================================
+# Example binaries
+#============================================================================
+
+add_executable(example example.c)
+target_link_libraries(example zlib)
+add_test(example example)
+
+add_executable(minigzip minigzip.c)
+target_link_libraries(minigzip zlib)
+
+if(HAVE_OFF64_T)
+    add_executable(example64 example.c)
+    target_link_libraries(example64 zlib)
+    set_target_properties(example64 PROPERTIES COMPILE_FLAGS "-D_FILE_OFFSET_BITS=64")
+    add_test(example64 example64)
+
+    add_executable(minigzip64 minigzip.c)
+    target_link_libraries(minigzip64 zlib)
+    set_target_properties(minigzip64 PROPERTIES COMPILE_FLAGS "-D_FILE_OFFSET_BITS=64")
+endif()

FAQ

@@ -0,0 +1,366 @@
+
+                Frequently Asked Questions about zlib
+
+
+If your question is not there, please check the zlib home page
+http://zlib.net/ which may have more recent information.
+The lastest zlib FAQ is at http://zlib.net/zlib_faq.html
+
+
+ 1. Is zlib Y2K-compliant?
+
+    Yes. zlib doesn't handle dates.
+
+ 2. Where can I get a Windows DLL version?
+
+    The zlib sources can be compiled without change to produce a DLL.  See the
+    file win32/DLL_FAQ.txt in the zlib distribution.  Pointers to the
+    precompiled DLL are found in the zlib web site at http://zlib.net/ .
+
+ 3. Where can I get a Visual Basic interface to zlib?
+
+    See
+        * http://marknelson.us/1997/01/01/zlib-engine/
+        * win32/DLL_FAQ.txt in the zlib distribution
+
+ 4. compress() returns Z_BUF_ERROR.
+
+    Make sure that before the call of compress(), the length of the compressed
+    buffer is equal to the available size of the compressed buffer and not
+    zero.  For Visual Basic, check that this parameter is passed by reference
+    ("as any"), not by value ("as long").
+
+ 5. deflate() or inflate() returns Z_BUF_ERROR.
+
+    Before making the call, make sure that avail_in and avail_out are not zero.
+    When setting the parameter flush equal to Z_FINISH, also make sure that
+    avail_out is big enough to allow processing all pending input.  Note that a
+    Z_BUF_ERROR is not fatal--another call to deflate() or inflate() can be
+    made with more input or output space.  A Z_BUF_ERROR may in fact be
+    unavoidable depending on how the functions are used, since it is not
+    possible to tell whether or not there is more output pending when
+    strm.avail_out returns with zero.  See http://zlib.net/zlib_how.html for a
+    heavily annotated example.
+
+ 6. Where's the zlib documentation (man pages, etc.)?
+
+    It's in zlib.h .  Examples of zlib usage are in the files example.c and
+    minigzip.c, with more in examples/ .
+
+ 7. Why don't you use GNU autoconf or libtool or ...?
+
+    Because we would like to keep zlib as a very small and simple package.
+    zlib is rather portable and doesn't need much configuration.
+
+ 8. I found a bug in zlib.
+
+    Most of the time, such problems are due to an incorrect usage of zlib.
+    Please try to reproduce the problem with a small program and send the
+    corresponding source to us at zlib@gzip.org .  Do not send multi-megabyte
+    data files without prior agreement.
+
+ 9. Why do I get "undefined reference to gzputc"?
+
+    If "make test" produces something like
+
+       example.o(.text+0x154): undefined reference to `gzputc'
+
+    check that you don't have old files libz.* in /usr/lib, /usr/local/lib or
+    /usr/X11R6/lib. Remove any old versions, then do "make install".
+
+10. I need a Delphi interface to zlib.
+
+    See the contrib/delphi directory in the zlib distribution.
+
+11. Can zlib handle .zip archives?
+
+    Not by itself, no.  See the directory contrib/minizip in the zlib
+    distribution.
+
+12. Can zlib handle .Z files?
+
+    No, sorry.  You have to spawn an uncompress or gunzip subprocess, or adapt
+    the code of uncompress on your own.
+
+13. How can I make a Unix shared library?
+
+    make clean
+    ./configure -s
+    make
+
+14. How do I install a shared zlib library on Unix?
+
+    After the above, then:
+
+    make install
+
+    However, many flavors of Unix come with a shared zlib already installed.
+    Before going to the trouble of compiling a shared version of zlib and
+    trying to install it, you may want to check if it's already there!  If you
+    can #include <zlib.h>, it's there.  The -lz option will probably link to
+    it.  You can check the version at the top of zlib.h or with the
+    ZLIB_VERSION symbol defined in zlib.h .
+
+15. I have a question about OttoPDF.
+
+    We are not the authors of OttoPDF. The real author is on the OttoPDF web
+    site: Joel Hainley, jhainley@myndkryme.com.
+
+16. Can zlib decode Flate data in an Adobe PDF file?
+
+    Yes. See http://www.pdflib.com/ . To modify PDF forms, see
+    http://sourceforge.net/projects/acroformtool/ .
+
+17. Why am I getting this "register_frame_info not found" error on Solaris?
+
+    After installing zlib 1.1.4 on Solaris 2.6, running applications using zlib
+    generates an error such as:
+
+        ld.so.1: rpm: fatal: relocation error: file /usr/local/lib/libz.so:
+        symbol __register_frame_info: referenced symbol not found
+
+    The symbol __register_frame_info is not part of zlib, it is generated by
+    the C compiler (cc or gcc).  You must recompile applications using zlib
+    which have this problem.  This problem is specific to Solaris.  See
+    http://www.sunfreeware.com for Solaris versions of zlib and applications
+    using zlib.
+
+18. Why does gzip give an error on a file I make with compress/deflate?
+
+    The compress and deflate functions produce data in the zlib format, which
+    is different and incompatible with the gzip format.  The gz* functions in
+    zlib on the other hand use the gzip format.  Both the zlib and gzip formats
+    use the same compressed data format internally, but have different headers
+    and trailers around the compressed data.
+
+19. Ok, so why are there two different formats?
+
+    The gzip format was designed to retain the directory information about a
+    single file, such as the name and last modification date.  The zlib format
+    on the other hand was designed for in-memory and communication channel
+    applications, and has a much more compact header and trailer and uses a
+    faster integrity check than gzip.
+
+20. Well that's nice, but how do I make a gzip file in memory?
+
+    You can request that deflate write the gzip format instead of the zlib
+    format using deflateInit2().  You can also request that inflate decode the
+    gzip format using inflateInit2().  Read zlib.h for more details.
+
+21. Is zlib thread-safe?
+
+    Yes.  However any library routines that zlib uses and any application-
+    provided memory allocation routines must also be thread-safe.  zlib's gz*
+    functions use stdio library routines, and most of zlib's functions use the
+    library memory allocation routines by default.  zlib's *Init* functions
+    allow for the application to provide custom memory allocation routines.
+
+    Of course, you should only operate on any given zlib or gzip stream from a
+    single thread at a time.
+
+22. Can I use zlib in my commercial application?
+
+    Yes.  Please read the license in zlib.h.
+
+23. Is zlib under the GNU license?
+
+    No.  Please read the license in zlib.h.
+
+24. The license says that altered source versions must be "plainly marked". So
+    what exactly do I need to do to meet that requirement?
+
+    You need to change the ZLIB_VERSION and ZLIB_VERNUM #defines in zlib.h.  In
+    particular, the final version number needs to be changed to "f", and an
+    identification string should be appended to ZLIB_VERSION.  Version numbers
+    x.x.x.f are reserved for modifications to zlib by others than the zlib
+    maintainers.  For example, if the version of the base zlib you are altering
+    is "1.2.3.4", then in zlib.h you should change ZLIB_VERNUM to 0x123f, and
+    ZLIB_VERSION to something like "1.2.3.f-zachary-mods-v3".  You can also
+    update the version strings in deflate.c and inftrees.c.
+
+    For altered source distributions, you should also note the origin and
+    nature of the changes in zlib.h, as well as in ChangeLog and README, along
+    with the dates of the alterations.  The origin should include at least your
+    name (or your company's name), and an email address to contact for help or
+    issues with the library.
+
+    Note that distributing a compiled zlib library along with zlib.h and
+    zconf.h is also a source distribution, and so you should change
+    ZLIB_VERSION and ZLIB_VERNUM and note the origin and nature of the changes
+    in zlib.h as you would for a full source distribution.
+
+25. Will zlib work on a big-endian or little-endian architecture, and can I
+    exchange compressed data between them?
+
+    Yes and yes.
+
+26. Will zlib work on a 64-bit machine?
+
+    Yes.  It has been tested on 64-bit machines, and has no dependence on any
+    data types being limited to 32-bits in length.  If you have any
+    difficulties, please provide a complete problem report to zlib@gzip.org
+
+27. Will zlib decompress data from the PKWare Data Compression Library?
+
+    No.  The PKWare DCL uses a completely different compressed data format than
+    does PKZIP and zlib.  However, you can look in zlib's contrib/blast
+    directory for a possible solution to your problem.
+
+28. Can I access data randomly in a compressed stream?
+
+    No, not without some preparation.  If when compressing you periodically use
+    Z_FULL_FLUSH, carefully write all the pending data at those points, and
+    keep an index of those locations, then you can start decompression at those
+    points.  You have to be careful to not use Z_FULL_FLUSH too often, since it
+    can significantly degrade compression.  Alternatively, you can scan a
+    deflate stream once to generate an index, and then use that index for
+    random access.  See examples/zran.c .
+
+29. Does zlib work on MVS, OS/390, CICS, etc.?
+
+    It has in the past, but we have not heard of any recent evidence.  There
+    were working ports of zlib 1.1.4 to MVS, but those links no longer work.
+    If you know of recent, successful applications of zlib on these operating
+    systems, please let us know.  Thanks.
+
+30. Is there some simpler, easier to read version of inflate I can look at to
+    understand the deflate format?
+
+    First off, you should read RFC 1951.  Second, yes.  Look in zlib's
+    contrib/puff directory.
+
+31. Does zlib infringe on any patents?
+
+    As far as we know, no.  In fact, that was originally the whole point behind
+    zlib.  Look here for some more information:
+
+    http://www.gzip.org/#faq11
+
+32. Can zlib work with greater than 4 GB of data?
+
+    Yes.  inflate() and deflate() will process any amount of data correctly.
+    Each call of inflate() or deflate() is limited to input and output chunks
+    of the maximum value that can be stored in the compiler's "unsigned int"
+    type, but there is no limit to the number of chunks.  Note however that the
+    strm.total_in and strm_total_out counters may be limited to 4 GB.  These
+    counters are provided as a convenience and are not used internally by
+    inflate() or deflate().  The application can easily set up its own counters
+    updated after each call of inflate() or deflate() to count beyond 4 GB.
+    compress() and uncompress() may be limited to 4 GB, since they operate in a
+    single call.  gzseek() and gztell() may be limited to 4 GB depending on how
+    zlib is compiled.  See the zlibCompileFlags() function in zlib.h.
+
+    The word "may" appears several times above since there is a 4 GB limit only
+    if the compiler's "long" type is 32 bits.  If the compiler's "long" type is
+    64 bits, then the limit is 16 exabytes.
+
+33. Does zlib have any security vulnerabilities?
+
+    The only one that we are aware of is potentially in gzprintf().  If zlib is
+    compiled to use sprintf() or vsprintf(), then there is no protection
+    against a buffer overflow of an 8K string space (or other value as set by
+    gzbuffer()), other than the caller of gzprintf() assuring that the output
+    will not exceed 8K.  On the other hand, if zlib is compiled to use
+    snprintf() or vsnprintf(), which should normally be the case, then there is
+    no vulnerability.  The ./configure script will display warnings if an
+    insecure variation of sprintf() will be used by gzprintf().  Also the
+    zlibCompileFlags() function will return information on what variant of
+    sprintf() is used by gzprintf().
+
+    If you don't have snprintf() or vsnprintf() and would like one, you can
+    find a portable implementation here:
+
+        http://www.ijs.si/software/snprintf/
+
+    Note that you should be using the most recent version of zlib.  Versions
+    1.1.3 and before were subject to a double-free vulnerability, and versions
+    1.2.1 and 1.2.2 were subject to an access exception when decompressing
+    invalid compressed data.
+
+34. Is there a Java version of zlib?
+
+    Probably what you want is to use zlib in Java. zlib is already included
+    as part of the Java SDK in the java.util.zip package. If you really want
+    a version of zlib written in the Java language, look on the zlib home
+    page for links: http://zlib.net/ .
+
+35. I get this or that compiler or source-code scanner warning when I crank it
+    up to maximally-pedantic. Can't you guys write proper code?
+
+    Many years ago, we gave up attempting to avoid warnings on every compiler
+    in the universe.  It just got to be a waste of time, and some compilers
+    were downright silly as well as contradicted each other.  So now, we simply
+    make sure that the code always works.
+
+36. Valgrind (or some similar memory access checker) says that deflate is
+    performing a conditional jump that depends on an uninitialized value.
+    Isn't that a bug?
+
+    No.  That is intentional for performance reasons, and the output of deflate
+    is not affected.  This only started showing up recently since zlib 1.2.x
+    uses malloc() by default for allocations, whereas earlier versions used
+    calloc(), which zeros out the allocated memory.  Even though the code was
+    correct, versions 1.2.4 and later was changed to not stimulate these
+    checkers.
+
+37. Will zlib read the (insert any ancient or arcane format here) compressed
+    data format?
+
+    Probably not. Look in the comp.compression FAQ for pointers to various
+    formats and associated software.
+
+38. How can I encrypt/decrypt zip files with zlib?
+
+    zlib doesn't support encryption.  The original PKZIP encryption is very
+    weak and can be broken with freely available programs.  To get strong
+    encryption, use GnuPG, http://www.gnupg.org/ , which already includes zlib
+    compression.  For PKZIP compatible "encryption", look at
+    http://www.info-zip.org/
+
+39. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings?
+
+    "gzip" is the gzip format, and "deflate" is the zlib format.  They should
+    probably have called the second one "zlib" instead to avoid confusion with
+    the raw deflate compressed data format.  While the HTTP 1.1 RFC 2616
+    correctly points to the zlib specification in RFC 1950 for the "deflate"
+    transfer encoding, there have been reports of servers and browsers that
+    incorrectly produce or expect raw deflate data per the deflate
+    specficiation in RFC 1951, most notably Microsoft.  So even though the
+    "deflate" transfer encoding using the zlib format would be the more
+    efficient approach (and in fact exactly what the zlib format was designed
+    for), using the "gzip" transfer encoding is probably more reliable due to
+    an unfortunate choice of name on the part of the HTTP 1.1 authors.
+
+    Bottom line: use the gzip format for HTTP 1.1 encoding.
+
+40. Does zlib support the new "Deflate64" format introduced by PKWare?
+
+    No.  PKWare has apparently decided to keep that format proprietary, since
+    they have not documented it as they have previous compression formats.  In
+    any case, the compression improvements are so modest compared to other more
+    modern approaches, that it's not worth the effort to implement.
+
+41. I'm having a problem with the zip functions in zlib, can you help?
+
+    There are no zip functions in zlib.  You are probably using minizip by
+    Giles Vollant, which is found in the contrib directory of zlib.  It is not
+    part of zlib.  In fact none of the stuff in contrib is part of zlib.  The
+    files in there are not supported by the zlib authors.  You need to contact
+    the authors of the respective contribution for help.
+
+42. The match.asm code in contrib is under the GNU General Public License.
+    Since it's part of zlib, doesn't that mean that all of zlib falls under the
+    GNU GPL?
+
+    No.  The files in contrib are not part of zlib.  They were contributed by
+    other authors and are provided as a convenience to the user within the zlib
+    distribution.  Each item in contrib has its own license.
+
+43. Is zlib subject to export controls?  What is its ECCN?
+
+    zlib is not subject to export controls, and so is classified as EAR99.
+
+44. Can you please sign these lengthy legal documents and fax them back to us
+    so that we can use your software in our product?
+
+    No. Go away. Shoo.

INDEX

@@ -0,0 +1,65 @@
+CMakeLists.txt  cmake build file
+ChangeLog       history of changes
+FAQ             Frequently Asked Questions about zlib
+INDEX           this file
+Makefile        dummy Makefile that tells you to ./configure
+Makefile.in     template for Unix Makefile
+README          guess what
+configure       configure script for Unix
+make_vms.com    makefile for VMS
+treebuild.xml   XML description of source file dependencies
+zconf.h.cmakein zconf.h template for cmake
+zconf.h.in      zconf.h template for configure
+zlib.3          Man page for zlib
+zlib.3.pdf      Man page in PDF format
+zlib.map        Linux symbol information
+zlib.pc.in      Template for pkg-config descriptor
+zlib2ansi       perl script to convert source files for C++ compilation
+
+amiga/          makefiles for Amiga SAS C
+doc/            documentation for formats and algorithms
+msdos/          makefiles for MSDOS
+nintendods/     makefile for Nintendo DS
+old/            makefiles for various architectures and zlib documentation
+                files that have not yet been updated for zlib 1.2.x
+qnx/            makefiles for QNX
+watcom/         makefiles for OpenWatcom
+win32/          makefiles for Windows
+
+                zlib public header files (required for library use):
+zconf.h
+zlib.h
+
+                private source files used to build the zlib library:
+adler32.c
+compress.c
+crc32.c
+crc32.h
+deflate.c
+deflate.h
+gzclose.c
+gzguts.h
+gzlib.c
+gzread.c
+gzwrite.c
+infback.c
+inffast.c
+inffast.h
+inffixed.h
+inflate.c
+inflate.h
+inftrees.c
+inftrees.h
+trees.c
+trees.h
+uncompr.c
+zutil.c
+zutil.h
+
+                source files for sample programs:
+example.c
+minigzip.c
+See examples/README.examples for more
+
+                unsupported contribution by third parties
+See contrib/README.contrib

Makefile

@@ -1,59 +1,5 @@
-CC=cc
+all:
-CFLAGS=-O
+	-@echo "Please use ./configure first.  Thank you."
-#CFLAGS=-g -DDEBUG
-LDFLAGS=-L. -lgz
 
-RANLIB=ranlib
+distclean:
-
+	make -f Makefile.in distclean
-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
-       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o
-
-TEST_OBJS = example.o minigzip.o inftest.o
-
-all: example minigzip inftest
-
-test: all
-	./example
-	echo hello world | ./minigzip | ./minigzip -d 
-
-libgz.a: $(OBJS)
-	ar rc $@ $(OBJS)
-	$(RANLIB) $@
-
-example: example.o libgz.a
-	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
-
-minigzip: minigzip.o libgz.a
-	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
-
-inftest: inftest.o libgz.a
-	$(CC) $(CFLAGS) -o $@ inftest.o $(LDFLAGS)
-
-clean:
-	rm -f *.o example minigzip inftest libgz.a foo.gz
-
-zip:
-	zip -ul9 zlib README ChangeLog Makefile *.[ch]
-
-tgz:
-	cd ..; tar cfz zlib/zlib.tgz zlib/README zlib/ChangeLog zlib/Makefile \
-		zlib/*.[ch]
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-adler32.o: zutil.h zlib.h zconf.h
-compress.o: zlib.h zconf.h
-crc32.o: zutil.h zlib.h zconf.h
-deflate.o: deflate.h zutil.h zlib.h zconf.h
-example.o: zlib.h zconf.h
-gzio.o: zutil.h zlib.h zconf.h
-infblock.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
-infcodes.o: zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h
-inflate.o: zutil.h zlib.h zconf.h infblock.h
-inftest.o: zutil.h zlib.h zconf.h
-inftrees.o: zutil.h zlib.h zconf.h inftrees.h
-infutil.o: zutil.h zlib.h zconf.h inftrees.h infutil.h
-minigzip.o: zlib.h zconf.h
-trees.o: deflate.h zutil.h zlib.h zconf.h
-uncompr.o: zlib.h zconf.h
-zutil.o: zutil.h zlib.h zconf.h

Makefile.in

@@ -0,0 +1,257 @@
+# Makefile for zlib
+# Copyright (C) 1995-2010 Jean-loup Gailly.
+# For conditions of distribution and use, see copyright notice in zlib.h
+
+# To compile and test, type:
+#    ./configure; make test
+# Normally configure builds both a static and a shared library.
+# If you want to build just a static library, use: ./configure --static
+
+# To use the asm code, type:
+#    cp contrib/asm?86/match.S ./match.S
+#    make LOC=-DASMV OBJA=match.o
+
+# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
+#    make install
+# To install in $HOME instead of /usr/local, use:
+#    make install prefix=$HOME
+
+CC=cc
+
+CFLAGS=-O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-g -DDEBUG
+#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+#           -Wstrict-prototypes -Wmissing-prototypes
+
+SFLAGS=-O
+LDFLAGS=
+TEST_LDFLAGS=-L. libz.a
+LDSHARED=$(CC)
+CPP=$(CC) -E
+
+STATICLIB=libz.a
+SHAREDLIB=libz.so
+SHAREDLIBV=libz.so.1.2.5
+SHAREDLIBM=libz.so.1
+LIBS=$(STATICLIB) $(SHAREDLIBV)
+
+AR=ar rc
+RANLIB=ranlib
+LDCONFIG=ldconfig
+LDSHAREDLIBC=-lc
+TAR=tar
+SHELL=/bin/sh
+EXE=
+
+prefix = /usr/local
+exec_prefix = ${prefix}
+libdir = ${exec_prefix}/lib
+sharedlibdir = ${libdir}
+includedir = ${prefix}/include
+mandir = ${prefix}/share/man
+man3dir = ${mandir}/man3
+pkgconfigdir = ${libdir}/pkgconfig
+
+OBJC = adler32.o compress.o crc32.o deflate.o gzclose.o gzlib.o gzread.o \
+	gzwrite.o infback.o inffast.o inflate.o inftrees.o trees.o uncompr.o zutil.o
+
+PIC_OBJC = adler32.lo compress.lo crc32.lo deflate.lo gzclose.lo gzlib.lo gzread.lo \
+	gzwrite.lo infback.lo inffast.lo inflate.lo inftrees.lo trees.lo uncompr.lo zutil.lo
+
+# to use the asm code: make OBJA=match.o, PIC_OBJA=match.lo
+OBJA =
+PIC_OBJA =
+
+OBJS = $(OBJC) $(OBJA)
+
+PIC_OBJS = $(PIC_OBJC) $(PIC_OBJA)
+
+all: static shared
+
+static: example$(EXE) minigzip$(EXE)
+
+shared: examplesh$(EXE) minigzipsh$(EXE)
+
+all64: example64$(EXE) minigzip64$(EXE)
+
+check: test
+
+test: all teststatic testshared
+
+teststatic: static
+	@if echo hello world | ./minigzip | ./minigzip -d && ./example; then \
+	  echo '		*** zlib test OK ***'; \
+	else \
+	  echo '		*** zlib test FAILED ***'; false; \
+	fi
+	-@rm -f foo.gz
+
+testshared: shared
+	@LD_LIBRARY_PATH=`pwd`:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
+	LD_LIBRARYN32_PATH=`pwd`:$(LD_LIBRARYN32_PATH) ; export LD_LIBRARYN32_PATH; \
+	DYLD_LIBRARY_PATH=`pwd`:$(DYLD_LIBRARY_PATH) ; export DYLD_LIBRARY_PATH; \
+	SHLIB_PATH=`pwd`:$(SHLIB_PATH) ; export SHLIB_PATH; \
+	if echo hello world | ./minigzipsh | ./minigzipsh -d && ./examplesh; then \
+	  echo '		*** zlib shared test OK ***'; \
+	else \
+	  echo '		*** zlib shared test FAILED ***'; false; \
+	fi
+	-@rm -f foo.gz
+
+test64: all64
+	@if echo hello world | ./minigzip64 | ./minigzip64 -d && ./example64; then \
+	  echo '		*** zlib 64-bit test OK ***'; \
+	else \
+	  echo '		*** zlib 64-bit test FAILED ***'; false; \
+	fi
+	-@rm -f foo.gz
+
+libz.a: $(OBJS)
+	$(AR) $@ $(OBJS)
+	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
+
+match.o: match.S
+	$(CPP) match.S > _match.s
+	$(CC) -c _match.s
+	mv _match.o match.o
+	rm -f _match.s
+
+match.lo: match.S
+	$(CPP) match.S > _match.s
+	$(CC) -c -fPIC _match.s
+	mv _match.o match.lo
+	rm -f _match.s
+
+example64.o: example.c zlib.h zconf.h
+	$(CC) $(CFLAGS) -D_FILE_OFFSET_BITS=64 -c -o $@ example.c
+
+minigzip64.o: minigzip.c zlib.h zconf.h
+	$(CC) $(CFLAGS) -D_FILE_OFFSET_BITS=64 -c -o $@ minigzip.c
+
+.SUFFIXES: .lo
+
+.c.lo:
+	-@mkdir objs 2>/dev/null || test -d objs
+	$(CC) $(SFLAGS) -DPIC -c -o objs/$*.o $<
+	-@mv objs/$*.o $@
+
+$(SHAREDLIBV): $(PIC_OBJS)
+	$(LDSHARED) $(SFLAGS) -o $@ $(PIC_OBJS) $(LDSHAREDLIBC) $(LDFLAGS)
+	rm -f $(SHAREDLIB) $(SHAREDLIBM)
+	ln -s $@ $(SHAREDLIB)
+	ln -s $@ $(SHAREDLIBM)
+	-@rmdir objs
+
+example$(EXE): example.o $(STATICLIB)
+	$(CC) $(CFLAGS) -o $@ example.o $(TEST_LDFLAGS)
+
+minigzip$(EXE): minigzip.o $(STATICLIB)
+	$(CC) $(CFLAGS) -o $@ minigzip.o $(TEST_LDFLAGS)
+
+examplesh$(EXE): example.o $(SHAREDLIBV)
+	$(CC) $(CFLAGS) -o $@ example.o -L. $(SHAREDLIBV)
+
+minigzipsh$(EXE): minigzip.o $(SHAREDLIBV)
+	$(CC) $(CFLAGS) -o $@ minigzip.o -L. $(SHAREDLIBV)
+
+example64$(EXE): example64.o $(STATICLIB)
+	$(CC) $(CFLAGS) -o $@ example64.o $(TEST_LDFLAGS)
+
+minigzip64$(EXE): minigzip64.o $(STATICLIB)
+	$(CC) $(CFLAGS) -o $@ minigzip64.o $(TEST_LDFLAGS)
+
+install-libs: $(LIBS)
+	-@if [ ! -d $(DESTDIR)$(exec_prefix)  ]; then mkdir -p $(DESTDIR)$(exec_prefix); fi
+	-@if [ ! -d $(DESTDIR)$(libdir)       ]; then mkdir -p $(DESTDIR)$(libdir); fi
+	-@if [ ! -d $(DESTDIR)$(sharedlibdir) ]; then mkdir -p $(DESTDIR)$(sharedlibdir); fi
+	-@if [ ! -d $(DESTDIR)$(man3dir)      ]; then mkdir -p $(DESTDIR)$(man3dir); fi
+	-@if [ ! -d $(DESTDIR)$(pkgconfigdir) ]; then mkdir -p $(DESTDIR)$(pkgconfigdir); fi
+	cp $(STATICLIB) $(DESTDIR)$(libdir)
+	cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)
+	cd $(DESTDIR)$(libdir); chmod u=rw,go=r $(STATICLIB)
+	-@(cd $(DESTDIR)$(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
+	-@cd $(DESTDIR)$(sharedlibdir); if test "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \
+	  chmod 755 $(SHAREDLIBV); \
+	  rm -f $(SHAREDLIB) $(SHAREDLIBM); \
+	  ln -s $(SHAREDLIBV) $(SHAREDLIB); \
+	  ln -s $(SHAREDLIBV) $(SHAREDLIBM); \
+	  ($(LDCONFIG) || true)  >/dev/null 2>&1; \
+	fi
+	cp zlib.3 $(DESTDIR)$(man3dir)
+	chmod 644 $(DESTDIR)$(man3dir)/zlib.3
+	cp zlib.pc $(DESTDIR)$(pkgconfigdir)
+	chmod 644 $(DESTDIR)$(pkgconfigdir)/zlib.pc
+# The ranlib in install is needed on NeXTSTEP which checks file times
+# ldconfig is for Linux
+
+install: install-libs
+	-@if [ ! -d $(DESTDIR)$(includedir)   ]; then mkdir -p $(DESTDIR)$(includedir); fi
+	cp zlib.h zconf.h $(DESTDIR)$(includedir)
+	chmod 644 $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h
+
+uninstall:
+	cd $(DESTDIR)$(includedir); rm -f zlib.h zconf.h
+	cd $(DESTDIR)$(libdir); rm -f libz.a; \
+	if test "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \
+	  rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \
+	fi
+	cd $(DESTDIR)$(man3dir); rm -f zlib.3
+	cd $(DESTDIR)$(pkgconfigdir); rm -f zlib.pc
+
+docs: zlib.3.pdf
+
+zlib.3.pdf: zlib.3
+	groff -mandoc -f H -T ps zlib.3 | ps2pdf - zlib.3.pdf
+
+zconf.h.in: zconf.h.cmakein
+	sed "/^#cmakedefine/D" < zconf.h.cmakein > zconf.h.in
+	touch -r zconf.h.cmakein zconf.h.in
+
+zconf: zconf.h.in
+	cp -p zconf.h.in zconf.h
+
+mostlyclean: clean
+clean:
+	rm -f *.o *.lo *~ \
+	   example$(EXE) minigzip$(EXE) examplesh$(EXE) minigzipsh$(EXE) \
+	   example64$(EXE) minigzip64$(EXE) \
+	   libz.* foo.gz so_locations \
+	   _match.s maketree contrib/infback9/*.o
+	rm -rf objs
+
+maintainer-clean: distclean
+distclean: clean zconf docs
+	rm -f Makefile zlib.pc
+	-@rm -f .DS_Store
+	-@printf 'all:\n\t-@echo "Please use ./configure first.  Thank you."\n' > Makefile
+	-@printf '\ndistclean:\n\tmake -f Makefile.in distclean\n' >> Makefile
+	-@touch -r Makefile.in Makefile
+
+tags:
+	etags *.[ch]
+
+depend:
+	makedepend -- $(CFLAGS) -- *.[ch]
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o zutil.o: zutil.h zlib.h zconf.h
+gzclose.o gzlib.o gzread.o gzwrite.o: zlib.h zconf.h gzguts.h
+compress.o example.o minigzip.o uncompr.o: zlib.h zconf.h
+crc32.o: zutil.h zlib.h zconf.h crc32.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+infback.o inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h inffixed.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
+
+adler32.lo zutil.lo: zutil.h zlib.h zconf.h
+gzclose.lo gzlib.lo gzread.lo gzwrite.lo: zlib.h zconf.h gzguts.h
+compress.lo example.lo minigzip.lo uncompr.lo: zlib.h zconf.h
+crc32.lo: zutil.h zlib.h zconf.h crc32.h
+deflate.lo: deflate.h zutil.h zlib.h zconf.h
+infback.lo inflate.lo: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h inffixed.h
+inffast.lo: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inftrees.lo: zutil.h zlib.h zconf.h inftrees.h
+trees.lo: deflate.h zutil.h zlib.h zconf.h trees.h

README

@@ -1,32 +1,90 @@
-zlib 0.71 is a beta version of a general purpose compression library.
+ZLIB DATA COMPRESSION LIBRARY
 
-The data format used by the zlib library is described in the
+zlib 1.2.5 is a general purpose data compression library.  All the code is
-file zlib-3.1.doc, deflate-1.1.doc and gzip-4.1.doc, available
+thread safe.  The data format used by the zlib library is described by RFCs
-in ftp.uu.net:/pub/archiving/zip/doc.
+(Request for Comments) 1950 to 1952 in the files
+http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
+and rfc1952.txt (gzip format).
 
-All functions of the compression library are documented in the file
+All functions of the compression library are documented in the file zlib.h
-zlib.h. A usage example of the library is given in the file example.c
+(volunteer to write man pages welcome, contact zlib@gzip.org).  A usage example
-which also tests that the library is working correctly.
+of the library is given in the file example.c which also tests that the library
-To compile all files and run the test program, just type: make test
+is working correctly.  Another example is given in the file minigzip.c.  The
+compression library itself is composed of all source files except example.c and
+minigzip.c.
 
-The changes made in version 0.71 are documented in the file ChangeLog.
+To compile all files and run the test program, follow the instructions given at
-The main changes since 0.5 are:
+the top of Makefile.in.  In short "./configure; make test", and if that goes
-- added full inflate support
+well, "make install" should work for most flavors of Unix.  For Windows, use one
-- added minigzip.c
+of the special makefiles in win32/ or contrib/vstudio/ .  For VMS, use
-- added gzdopen to reopen a file descriptor as gzFile
+make_vms.com.
-- added transparent reading of non-gziped files in gzread.
-- fix some MSDOS problems. example and minigzip now work on MSDOS.
-- Simplified the crc32() interface. The pre- and post-conditioning
-  (one's complement) is now done inside crc32(). WARNING: this is
-  incompatible with previous versions; see zlib.h for the new usage.
 
-On MSDOS, this version works in large and small model with MSC; in
+Questions about zlib should be sent to <zlib@gzip.org>, or to Gilles Vollant
-small model only with TurboC (bug being investigated). For both
+<info@winimage.com> for the Windows DLL version.  The zlib home page is
-compilers, small model compression works only for small values of
+http://zlib.net/ .  Before reporting a problem, please check this site to
-MEM_LEVEL and WBITS (see zutil.h), and requires -DUSE_CALLOC.
+verify that you have the latest version of zlib; otherwise get the latest
+version and check whether the problem still exists or not.
+
+PLEASE read the zlib FAQ http://zlib.net/zlib_faq.html before asking for help.
+
+Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan.  1997
+issue of Dr.  Dobb's Journal; a copy of the article is available at
+http://marknelson.us/1997/01/01/zlib-engine/ .
+
+The changes made in version 1.2.5 are documented in the file ChangeLog.
+
+Unsupported third party contributions are provided in directory contrib/ .
+
+zlib is available in Java using the java.util.zip package, documented at
+http://java.sun.com/developer/technicalArticles/Programming/compression/ .
+
+A Perl interface to zlib written by Paul Marquess <pmqs@cpan.org> is available
+at CPAN (Comprehensive Perl Archive Network) sites, including
+http://search.cpan.org/~pmqs/IO-Compress-Zlib/ .
+
+A Python interface to zlib written by A.M. Kuchling <amk@amk.ca> is
+available in Python 1.5 and later versions, see
+http://www.python.org/doc/lib/module-zlib.html .
+
+zlib is built into tcl: http://wiki.tcl.tk/4610 .
+
+An experimental package to read and write files in .zip format, written on top
+of zlib by Gilles Vollant <info@winimage.com>, is available in the
+contrib/minizip directory of zlib.
 
 
-  Copyright (C) 1995 Jean-loup Gailly and Mark Adler
+Notes for some targets:
+
+- For Windows DLL versions, please see win32/DLL_FAQ.txt
+
+- For 64-bit Irix, deflate.c must be compiled without any optimization. With
+  -O, one libpng test fails. The test works in 32 bit mode (with the -n32
+  compiler flag). The compiler bug has been reported to SGI.
+
+- zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1 it works
+  when compiled with cc.
+
+- On Digital Unix 4.0D (formely OSF/1) on AlphaServer, the cc option -std1 is
+  necessary to get gzprintf working correctly. This is done by configure.
+
+- zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works with
+  other compilers. Use "make test" to check your compiler.
+
+- gzdopen is not supported on RISCOS or BEOS.
+
+- For PalmOs, see http://palmzlib.sourceforge.net/
+
+
+Acknowledgments:
+
+  The deflate format used by zlib was defined by Phil Katz.  The deflate and
+  zlib specifications were written by L.  Peter Deutsch.  Thanks to all the
+  people who reported problems and suggested various improvements in zlib; they
+  are too numerous to cite here.
+
+Copyright notice:
+
+ (C) 1995-2010 Jean-loup Gailly and Mark Adler
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the authors be held liable for any damages
@@ -45,13 +103,13 @@ MEM_LEVEL and WBITS (see zutil.h), and requires -DUSE_CALLOC.
   3. This notice may not be removed or altered from any source distribution.
 
   Jean-loup Gailly        Mark Adler
-  gzip@prep.ai.mit.edu    madler@cco.caltech.edu
+  jloup@gzip.org          madler@alumni.caltech.edu
 
-If you use the zlib library in a product, we would appreciate *not*
+If you use the zlib library in a product, we would appreciate *not* receiving
-receiving lengthy legal documents to sign. The sources are provided
+lengthy legal documents to sign.  The sources are provided for free but without
-for free but without warranty of any kind.  The library has been
+warranty of any kind.  The library has been entirely written by Jean-loup
-entirely written by Jean-loup Gailly and Mark Adler; it does not
+Gailly and Mark Adler; it does not include third-party code.
-include third-party code.
 
-If you redistribute modified sources, we would appreciate that you include
+If you redistribute modified sources, we would appreciate that you include in
-in the file ChangeLog history information documenting your changes.
+the file ChangeLog history information documenting your changes.  Please read
+the FAQ for more information on the distribution of modified source versions.

adler32.c

@@ -1,46 +1,169 @@
 /* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995 Mark Adler
+ * Copyright (C) 1995-2007 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h 
+ * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
-/* $Id: adler32.c,v 1.5 1995/04/14 14:49:51 jloup Exp $ */
+/* @(#) $Id$ */
 
 #include "zutil.h"
 
-#define BASE 65521 /* largest prime smaller than 65536 */
+#define local static
+
+local uLong adler32_combine_(uLong adler1, uLong adler2, z_off64_t len2);
+
+#define BASE 65521UL    /* largest prime smaller than 65536 */
 #define NMAX 5552
 /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
 
-#define DO1(buf)  {s1 += *buf++; s2 += s1;}
+#define DO1(buf,i)  {adler += (buf)[i]; sum2 += adler;}
-#define DO2(buf)  DO1(buf); DO1(buf);
+#define DO2(buf,i)  DO1(buf,i); DO1(buf,i+1);
-#define DO4(buf)  DO2(buf); DO2(buf);
+#define DO4(buf,i)  DO2(buf,i); DO2(buf,i+2);
-#define DO8(buf)  DO4(buf); DO4(buf);
+#define DO8(buf,i)  DO4(buf,i); DO4(buf,i+4);
-#define DO16(buf) DO8(buf); DO8(buf);
+#define DO16(buf)   DO8(buf,0); DO8(buf,8);
+
+/* use NO_DIVIDE if your processor does not do division in hardware */
+#ifdef NO_DIVIDE
+#  define MOD(a) \
+    do { \
+        if (a >= (BASE << 16)) a -= (BASE << 16); \
+        if (a >= (BASE << 15)) a -= (BASE << 15); \
+        if (a >= (BASE << 14)) a -= (BASE << 14); \
+        if (a >= (BASE << 13)) a -= (BASE << 13); \
+        if (a >= (BASE << 12)) a -= (BASE << 12); \
+        if (a >= (BASE << 11)) a -= (BASE << 11); \
+        if (a >= (BASE << 10)) a -= (BASE << 10); \
+        if (a >= (BASE << 9)) a -= (BASE << 9); \
+        if (a >= (BASE << 8)) a -= (BASE << 8); \
+        if (a >= (BASE << 7)) a -= (BASE << 7); \
+        if (a >= (BASE << 6)) a -= (BASE << 6); \
+        if (a >= (BASE << 5)) a -= (BASE << 5); \
+        if (a >= (BASE << 4)) a -= (BASE << 4); \
+        if (a >= (BASE << 3)) a -= (BASE << 3); \
+        if (a >= (BASE << 2)) a -= (BASE << 2); \
+        if (a >= (BASE << 1)) a -= (BASE << 1); \
+        if (a >= BASE) a -= BASE; \
+    } while (0)
+#  define MOD4(a) \
+    do { \
+        if (a >= (BASE << 4)) a -= (BASE << 4); \
+        if (a >= (BASE << 3)) a -= (BASE << 3); \
+        if (a >= (BASE << 2)) a -= (BASE << 2); \
+        if (a >= (BASE << 1)) a -= (BASE << 1); \
+        if (a >= BASE) a -= BASE; \
+    } while (0)
+#else
+#  define MOD(a) a %= BASE
+#  define MOD4(a) a %= BASE
+#endif
 
 /* ========================================================================= */
-uLong adler32(adler, buf, len)
+uLong ZEXPORT adler32(adler, buf, len)
     uLong adler;
-    Byte *buf;
+    const Bytef *buf;
     uInt len;
 {
-    unsigned long s1 = adler & 0xffff;
+    unsigned long sum2;
-    unsigned long s2 = (adler >> 16) & 0xffff;
+    unsigned n;
-    int k;
 
-    if (buf == Z_NULL) return 1L;
+    /* split Adler-32 into component sums */
+    sum2 = (adler >> 16) & 0xffff;
+    adler &= 0xffff;
 
-    while (len > 0) {
+    /* in case user likes doing a byte at a time, keep it fast */
-	k = len < NMAX ? len : NMAX;
+    if (len == 1) {
-	len -= k;
+        adler += buf[0];
-	while (k >= 16) {
+        if (adler >= BASE)
-	    DO16(buf);
+            adler -= BASE;
-	    k -= 16;
+        sum2 += adler;
-	}
+        if (sum2 >= BASE)
-	if (k != 0) do {
+            sum2 -= BASE;
-	    DO1(buf);
+        return adler | (sum2 << 16);
-	} while (--k);
-	s1 %= BASE;
-	s2 %= BASE;
     }
-    return (s2 << 16) | s1;
+
+    /* initial Adler-32 value (deferred check for len == 1 speed) */
+    if (buf == Z_NULL)
+        return 1L;
+
+    /* in case short lengths are provided, keep it somewhat fast */
+    if (len < 16) {
+        while (len--) {
+            adler += *buf++;
+            sum2 += adler;
+        }
+        if (adler >= BASE)
+            adler -= BASE;
+        MOD4(sum2);             /* only added so many BASE's */
+        return adler | (sum2 << 16);
+    }
+
+    /* do length NMAX blocks -- requires just one modulo operation */
+    while (len >= NMAX) {
+        len -= NMAX;
+        n = NMAX / 16;          /* NMAX is divisible by 16 */
+        do {
+            DO16(buf);          /* 16 sums unrolled */
+            buf += 16;
+        } while (--n);
+        MOD(adler);
+        MOD(sum2);
+    }
+
+    /* do remaining bytes (less than NMAX, still just one modulo) */
+    if (len) {                  /* avoid modulos if none remaining */
+        while (len >= 16) {
+            len -= 16;
+            DO16(buf);
+            buf += 16;
+        }
+        while (len--) {
+            adler += *buf++;
+            sum2 += adler;
+        }
+        MOD(adler);
+        MOD(sum2);
+    }
+
+    /* return recombined sums */
+    return adler | (sum2 << 16);
+}
+
+/* ========================================================================= */
+local uLong adler32_combine_(adler1, adler2, len2)
+    uLong adler1;
+    uLong adler2;
+    z_off64_t len2;
+{
+    unsigned long sum1;
+    unsigned long sum2;
+    unsigned rem;
+
+    /* the derivation of this formula is left as an exercise for the reader */
+    rem = (unsigned)(len2 % BASE);
+    sum1 = adler1 & 0xffff;
+    sum2 = rem * sum1;
+    MOD(sum2);
+    sum1 += (adler2 & 0xffff) + BASE - 1;
+    sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
+    if (sum1 >= BASE) sum1 -= BASE;
+    if (sum1 >= BASE) sum1 -= BASE;
+    if (sum2 >= (BASE << 1)) sum2 -= (BASE << 1);
+    if (sum2 >= BASE) sum2 -= BASE;
+    return sum1 | (sum2 << 16);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT adler32_combine(adler1, adler2, len2)
+    uLong adler1;
+    uLong adler2;
+    z_off_t len2;
+{
+    return adler32_combine_(adler1, adler2, len2);
+}
+
+uLong ZEXPORT adler32_combine64(adler1, adler2, len2)
+    uLong adler1;
+    uLong adler2;
+    z_off64_t len2;
+{
+    return adler32_combine_(adler1, adler2, len2);
 }

amiga/Makefile.pup

@@ -0,0 +1,69 @@
+# Amiga powerUP (TM) Makefile
+# makefile for libpng and SAS C V6.58/7.00 PPC compiler
+# Copyright (C) 1998 by Andreas R. Kleinert
+
+LIBNAME	= libzip.a
+
+CC	= scppc
+CFLAGS	= NOSTKCHK NOSINT OPTIMIZE OPTGO OPTPEEP OPTINLOCAL OPTINL \
+	  OPTLOOP OPTRDEP=8 OPTDEP=8 OPTCOMP=8 NOVER
+AR	= ppc-amigaos-ar cr
+RANLIB	= ppc-amigaos-ranlib
+LD	= ppc-amigaos-ld -r
+LDFLAGS	= -o
+LDLIBS	= LIB:scppc.a LIB:end.o
+RM	= delete quiet
+
+OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \
+       uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: example minigzip
+
+check: test
+test: all
+	example
+	echo hello world | minigzip | minigzip -d
+
+$(LIBNAME): $(OBJS)
+	$(AR) $@ $(OBJS)
+	-$(RANLIB) $@
+
+example: example.o $(LIBNAME)
+	$(LD) $(LDFLAGS) $@ LIB:c_ppc.o $@.o $(LIBNAME) $(LDLIBS)
+
+minigzip: minigzip.o $(LIBNAME)
+	$(LD) $(LDFLAGS) $@ LIB:c_ppc.o $@.o $(LIBNAME) $(LDLIBS)
+
+mostlyclean: clean
+clean:
+	$(RM) *.o example minigzip $(LIBNAME) foo.gz
+
+zip:
+	zip -ul9 zlib README ChangeLog Makefile Make????.??? Makefile.?? \
+	  descrip.mms *.[ch]
+
+tgz:
+	cd ..; tar cfz zlib/zlib.tgz zlib/README zlib/ChangeLog zlib/Makefile \
+	  zlib/Make????.??? zlib/Makefile.?? zlib/descrip.mms zlib/*.[ch]
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: crc32.h zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzclose.o: zlib.h zconf.h gzguts.h
+gzlib.o: zlib.h zconf.h gzguts.h
+gzread.o: zlib.h zconf.h gzguts.h
+gzwrite.o: zlib.h zconf.h gzguts.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+minigzip.o: zlib.h zconf.h
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h

amiga/Makefile.sas

@@ -0,0 +1,68 @@
+# SMakefile for zlib
+# Modified from the standard UNIX Makefile Copyright Jean-loup Gailly
+# Osma Ahvenlampi <Osma.Ahvenlampi@hut.fi>
+# Amiga, SAS/C 6.56 & Smake
+
+CC=sc
+CFLAGS=OPT
+#CFLAGS=OPT CPU=68030
+#CFLAGS=DEBUG=LINE
+LDFLAGS=LIB z.lib
+
+SCOPTIONS=OPTSCHED OPTINLINE OPTALIAS OPTTIME OPTINLOCAL STRMERGE \
+       NOICONS PARMS=BOTH NOSTACKCHECK UTILLIB NOVERSION ERRORREXX \
+       DEF=POSTINC
+
+OBJS = adler32.o compress.o crc32.o gzclose.o gzlib.o gzread.o gzwrite.o \
+       uncompr.o deflate.o trees.o zutil.o inflate.o infback.o inftrees.o inffast.o
+
+TEST_OBJS = example.o minigzip.o
+
+all: SCOPTIONS example minigzip
+
+check: test
+test: all
+	example
+	echo hello world | minigzip | minigzip -d
+
+install: z.lib
+	copy clone zlib.h zconf.h INCLUDE:
+	copy clone z.lib LIB:
+
+z.lib: $(OBJS)
+	oml z.lib r $(OBJS)
+
+example: example.o z.lib
+	$(CC) $(CFLAGS) LINK TO $@ example.o $(LDFLAGS)
+
+minigzip: minigzip.o z.lib
+	$(CC) $(CFLAGS) LINK TO $@ minigzip.o $(LDFLAGS)
+
+mostlyclean: clean
+clean:
+	-delete force quiet example minigzip *.o z.lib foo.gz *.lnk SCOPTIONS
+
+SCOPTIONS: Makefile.sas
+	copy to $@ <from <
+$(SCOPTIONS)
+<
+
+# DO NOT DELETE THIS LINE -- make depend depends on it.
+
+adler32.o: zlib.h zconf.h
+compress.o: zlib.h zconf.h
+crc32.o: crc32.h zlib.h zconf.h
+deflate.o: deflate.h zutil.h zlib.h zconf.h
+example.o: zlib.h zconf.h
+gzclose.o: zlib.h zconf.h gzguts.h
+gzlib.o: zlib.h zconf.h gzguts.h
+gzread.o: zlib.h zconf.h gzguts.h
+gzwrite.o: zlib.h zconf.h gzguts.h
+inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
+inftrees.o: zutil.h zlib.h zconf.h inftrees.h
+minigzip.o: zlib.h zconf.h
+trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
+uncompr.o: zlib.h zconf.h
+zutil.o: zutil.h zlib.h zconf.h

compress.c

@@ -1,55 +1,80 @@
 /* compress.c -- compress a memory buffer
- * Copyright (C) 1995 Jean-loup Gailly.
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h 
+ * For conditions of distribution and use, see copyright notice in zlib.h
  */
 
-/* $Id: compress.c,v 1.4 1995/04/10 15:52:04 jloup Exp $ */
+/* @(#) $Id$ */
 
+#define ZLIB_INTERNAL
 #include "zlib.h"
 
 /* ===========================================================================
-     Compresses the source buffer into the destination buffer.  sourceLen is
+     Compresses the source buffer into the destination buffer. The level
-   the byte length of the source buffer. Upon entry, destLen is the total
+   parameter has the same meaning as in deflateInit.  sourceLen is the byte
-   size of the destination buffer, which must be at least 0.1% larger than
+   length of the source buffer. Upon entry, destLen is the total size of the
-   sourceLen plus 8 bytes. Upon exit, destLen is the actual size of the
+   destination buffer, which must be at least 0.1% larger than sourceLen plus
-   compressed buffer.
+   12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
-     This function can be used to compress a whole file at once if the
+
-   input file is mmap'ed.
+     compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
-     compress returns Z_OK if success, Z_MEM_ERROR if there was not
+   memory, Z_BUF_ERROR if there was not enough room in the output buffer,
-   enough memory, Z_BUF_ERROR if there was not enough room in the output
+   Z_STREAM_ERROR if the level parameter is invalid.
-   buffer.
 */
-int compress (dest, destLen, source, sourceLen)
+int ZEXPORT compress2 (dest, destLen, source, sourceLen, level)
-    Byte *dest;
+    Bytef *dest;
-    uLong *destLen;
+    uLongf *destLen;
-    Byte *source;
+    const Bytef *source;
     uLong sourceLen;
+    int level;
 {
     z_stream stream;
     int err;
 
-    stream.next_in = source;
+    stream.next_in = (Bytef*)source;
     stream.avail_in = (uInt)sourceLen;
+#ifdef MAXSEG_64K
     /* Check for source > 64K on 16-bit machine: */
     if ((uLong)stream.avail_in != sourceLen) return Z_BUF_ERROR;
-
+#endif
     stream.next_out = dest;
     stream.avail_out = (uInt)*destLen;
     if ((uLong)stream.avail_out != *destLen) return Z_BUF_ERROR;
 
     stream.zalloc = (alloc_func)0;
     stream.zfree = (free_func)0;
+    stream.opaque = (voidpf)0;
 
-    err = deflateInit(&stream, Z_DEFAULT_COMPRESSION);
+    err = deflateInit(&stream, level);
     if (err != Z_OK) return err;
 
     err = deflate(&stream, Z_FINISH);
-    if (err != Z_OK) {
+    if (err != Z_STREAM_END) {
-	deflateEnd(&stream);
+        deflateEnd(&stream);
-	return err;
+        return err == Z_OK ? Z_BUF_ERROR : err;
     }
     *destLen = stream.total_out;
 
     err = deflateEnd(&stream);
     return err;
 }
+
+/* ===========================================================================
+ */
+int ZEXPORT compress (dest, destLen, source, sourceLen)
+    Bytef *dest;
+    uLongf *destLen;
+    const Bytef *source;
+    uLong sourceLen;
+{
+    return compress2(dest, destLen, source, sourceLen, Z_DEFAULT_COMPRESSION);
+}
+
+/* ===========================================================================
+     If the default memLevel or windowBits for deflateInit() is changed, then
+   this function needs to be updated.
+ */
+uLong ZEXPORT compressBound (sourceLen)
+    uLong sourceLen;
+{
+    return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
+           (sourceLen >> 25) + 13;
+}

configure

@@ -0,0 +1,596 @@
+#!/bin/sh
+# configure script for zlib.
+#
+# Normally configure builds both a static and a shared library.
+# If you want to build just a static library, use: ./configure --static
+#
+# To impose specific compiler or flags or install directory, use for example:
+#    prefix=$HOME CC=cc CFLAGS="-O4" ./configure
+# or for csh/tcsh users:
+#    (setenv prefix $HOME; setenv CC cc; setenv CFLAGS "-O4"; ./configure)
+
+# Incorrect settings of CC or CFLAGS may prevent creating a shared library.
+# If you have problems, try without defining CC and CFLAGS before reporting
+# an error.
+
+if [ -n "${CHOST}" ]; then
+    uname="$(echo "${CHOST}" | sed -e 's/^[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)$/\1/' -e 's/^[^-]*-[^-]*-\([^-]*\)-.*$/\1/')"
+    CROSS_PREFIX="${CHOST}-"
+fi
+
+STATICLIB=libz.a
+LDFLAGS="${LDFLAGS} -L. ${STATICLIB}"
+VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`
+VER3=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\\.[0-9]*\).*/\1/p' < zlib.h`
+VER2=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\)\\..*/\1/p' < zlib.h`
+VER1=`sed -n -e '/VERSION "/s/.*"\([0-9]*\)\\..*/\1/p' < zlib.h`
+if "${CROSS_PREFIX}ar" --version >/dev/null 2>/dev/null || test $? -lt 126; then
+    AR=${AR-"${CROSS_PREFIX}ar"}
+    test -n "${CROSS_PREFIX}" && echo Using ${AR}
+else
+    AR=${AR-"ar"}
+    test -n "${CROSS_PREFIX}" && echo Using ${AR}
+fi
+AR_RC="${AR} rc"
+if "${CROSS_PREFIX}ranlib" --version >/dev/null 2>/dev/null || test $? -lt 126; then
+    RANLIB=${RANLIB-"${CROSS_PREFIX}ranlib"}
+    test -n "${CROSS_PREFIX}" && echo Using ${RANLIB}
+else
+    RANLIB=${RANLIB-"ranlib"}
+fi
+if "${CROSS_PREFIX}nm" --version >/dev/null 2>/dev/null || test $? -lt 126; then
+    NM=${NM-"${CROSS_PREFIX}nm"}
+    test -n "${CROSS_PREFIX}" && echo Using ${NM}
+else
+    NM=${NM-"nm"}
+fi
+LDCONFIG=${LDCONFIG-"ldconfig"}
+LDSHAREDLIBC="${LDSHAREDLIBC--lc}"
+prefix=${prefix-/usr/local}
+exec_prefix=${exec_prefix-'${prefix}'}
+libdir=${libdir-'${exec_prefix}/lib'}
+sharedlibdir=${sharedlibdir-'${libdir}'}
+includedir=${includedir-'${prefix}/include'}
+mandir=${mandir-'${prefix}/share/man'}
+shared_ext='.so'
+shared=1
+zprefix=0
+build64=0
+gcc=0
+old_cc="$CC"
+old_cflags="$CFLAGS"
+
+while test $# -ge 1
+do
+case "$1" in
+    -h* | --help)
+      echo 'usage:'
+      echo '  configure [--zprefix] [--prefix=PREFIX]  [--eprefix=EXPREFIX]'
+      echo '    [--static] [--64] [--libdir=LIBDIR] [--sharedlibdir=LIBDIR]'
+      echo '    [--includedir=INCLUDEDIR]'
+        exit 0 ;;
+    -p*=* | --prefix=*) prefix=`echo $1 | sed 's/.*=//'`; shift ;;
+    -e*=* | --eprefix=*) exec_prefix=`echo $1 | sed 's/.*=//'`; shift ;;
+    -l*=* | --libdir=*) libdir=`echo $1 | sed 's/.*=//'`; shift ;;
+    --sharedlibdir=*) sharedlibdir=`echo $1 | sed 's/.*=//'`; shift ;;
+    -i*=* | --includedir=*) includedir=`echo $1 | sed 's/.*=//'`;shift ;;
+    -u*=* | --uname=*) uname=`echo $1 | sed 's/.*=//'`;shift ;;
+    -p* | --prefix) prefix="$2"; shift; shift ;;
+    -e* | --eprefix) exec_prefix="$2"; shift; shift ;;
+    -l* | --libdir) libdir="$2"; shift; shift ;;
+    -i* | --includedir) includedir="$2"; shift; shift ;;
+    -s* | --shared | --enable-shared) shared=1; shift ;;
+    -t | --static) shared=0; shift ;;
+    -z* | --zprefix) zprefix=1; shift ;;
+    -6* | --64) build64=1; shift ;;
+    --sysconfdir=*) echo "ignored option: --sysconfdir"; shift ;;
+    --localstatedir=*) echo "ignored option: --localstatedir"; shift ;;
+    *) echo "unknown option: $1"; echo "$0 --help for help"; exit 1 ;;
+    esac
+done
+
+test=ztest$$
+cat > $test.c <<EOF
+extern int getchar();
+int hello() {return getchar();}
+EOF
+
+test -z "$CC" && echo Checking for ${CROSS_PREFIX}gcc...
+cc=${CC-${CROSS_PREFIX}gcc}
+cflags=${CFLAGS-"-O3"}
+# to force the asm version use: CFLAGS="-O3 -DASMV" ./configure
+case "$cc" in
+  *gcc*) gcc=1 ;;
+esac
+
+if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
+  CC="$cc"
+  SFLAGS="${CFLAGS--O3} -fPIC"
+  CFLAGS="${CFLAGS--O3}"
+  if test $build64 -eq 1; then
+    CFLAGS="${CFLAGS} -m64"
+    SFLAGS="${SFLAGS} -m64"
+  fi
+  if test "${ZLIBGCCWARN}" = "YES"; then
+    CFLAGS="${CFLAGS} -Wall -Wextra -pedantic"
+  fi
+  if test -z "$uname"; then
+    uname=`(uname -s || echo unknown) 2>/dev/null`
+  fi
+  case "$uname" in
+  Linux* | linux* | GNU | GNU/* | *BSD | DragonFly) LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map"} ;;
+  CYGWIN* | Cygwin* | cygwin* | OS/2*)
+        EXE='.exe' ;;
+  MINGW*|mingw*)
+# temporary bypass
+        rm -f $test.[co] $test $test$shared_ext
+        echo "Please use win32/Makefile.gcc instead."
+        exit 1
+        LDSHARED=${LDSHARED-"$cc -shared"}
+        LDSHAREDLIBC=""
+        EXE='.exe' ;;
+  QNX*)  # This is for QNX6. I suppose that the QNX rule below is for QNX2,QNX4
+         # (alain.bonnefoy@icbt.com)
+                 LDSHARED=${LDSHARED-"$cc -shared -Wl,-hlibz.so.1"} ;;
+  HP-UX*)
+         LDSHARED=${LDSHARED-"$cc -shared $SFLAGS"}
+         case `(uname -m || echo unknown) 2>/dev/null` in
+         ia64)
+                 shared_ext='.so'
+                 SHAREDLIB='libz.so' ;;
+         *)
+                 shared_ext='.sl'
+                 SHAREDLIB='libz.sl' ;;
+         esac ;;
+  Darwin*)   shared_ext='.dylib'
+             SHAREDLIB=libz$shared_ext
+             SHAREDLIBV=libz.$VER$shared_ext
+             SHAREDLIBM=libz.$VER1$shared_ext
+             LDSHARED=${LDSHARED-"$cc -dynamiclib -install_name $libdir/$SHAREDLIBM -compatibility_version $VER1 -current_version $VER3"} ;;
+  *)             LDSHARED=${LDSHARED-"$cc -shared"} ;;
+  esac
+else
+  # find system name and corresponding cc options
+  CC=${CC-cc}
+  gcc=0
+  if test -z "$uname"; then
+    uname=`(uname -sr || echo unknown) 2>/dev/null`
+  fi
+  case "$uname" in
+  HP-UX*)    SFLAGS=${CFLAGS-"-O +z"}
+             CFLAGS=${CFLAGS-"-O"}
+#            LDSHARED=${LDSHARED-"ld -b +vnocompatwarnings"}
+             LDSHARED=${LDSHARED-"ld -b"}
+         case `(uname -m || echo unknown) 2>/dev/null` in
+         ia64)
+             shared_ext='.so'
+             SHAREDLIB='libz.so' ;;
+         *)
+             shared_ext='.sl'
+             SHAREDLIB='libz.sl' ;;
+         esac ;;
+  IRIX*)     SFLAGS=${CFLAGS-"-ansi -O2 -rpath ."}
+             CFLAGS=${CFLAGS-"-ansi -O2"}
+             LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so.1"} ;;
+  OSF1\ V4*) SFLAGS=${CFLAGS-"-O -std1"}
+             CFLAGS=${CFLAGS-"-O -std1"}
+             LDFLAGS="${LDFLAGS} -Wl,-rpath,."
+             LDSHARED=${LDSHARED-"cc -shared  -Wl,-soname,libz.so -Wl,-msym -Wl,-rpath,$(libdir) -Wl,-set_version,${VER}:1.0"} ;;
+  OSF1*)     SFLAGS=${CFLAGS-"-O -std1"}
+             CFLAGS=${CFLAGS-"-O -std1"}
+             LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so.1"} ;;
+  QNX*)      SFLAGS=${CFLAGS-"-4 -O"}
+             CFLAGS=${CFLAGS-"-4 -O"}
+             LDSHARED=${LDSHARED-"cc"}
+             RANLIB=${RANLIB-"true"}
+             AR_RC="cc -A" ;;
+  SCO_SV\ 3.2*) SFLAGS=${CFLAGS-"-O3 -dy -KPIC "}
+             CFLAGS=${CFLAGS-"-O3"}
+             LDSHARED=${LDSHARED-"cc -dy -KPIC -G"} ;;
+  SunOS\ 5*) LDSHARED=${LDSHARED-"cc -G"}
+         case `(uname -m || echo unknown) 2>/dev/null` in
+         i86*)
+             SFLAGS=${CFLAGS-"-xpentium -fast -KPIC -R."}
+             CFLAGS=${CFLAGS-"-xpentium -fast"} ;;
+         *)
+             SFLAGS=${CFLAGS-"-fast -xcg92 -KPIC -R."}
+             CFLAGS=${CFLAGS-"-fast -xcg92"} ;;
+         esac ;;
+  SunOS\ 4*) SFLAGS=${CFLAGS-"-O2 -PIC"}
+             CFLAGS=${CFLAGS-"-O2"}
+             LDSHARED=${LDSHARED-"ld"} ;;
+  SunStudio\ 9*) SFLAGS=${CFLAGS-"-fast -xcode=pic32 -xtarget=ultra3 -xarch=v9b"}
+             CFLAGS=${CFLAGS-"-fast -xtarget=ultra3 -xarch=v9b"}
+             LDSHARED=${LDSHARED-"cc -xarch=v9b"} ;;
+  UNIX_System_V\ 4.2.0)
+             SFLAGS=${CFLAGS-"-KPIC -O"}
+             CFLAGS=${CFLAGS-"-O"}
+             LDSHARED=${LDSHARED-"cc -G"} ;;
+  UNIX_SV\ 4.2MP)
+             SFLAGS=${CFLAGS-"-Kconform_pic -O"}
+             CFLAGS=${CFLAGS-"-O"}
+             LDSHARED=${LDSHARED-"cc -G"} ;;
+  OpenUNIX\ 5)
+             SFLAGS=${CFLAGS-"-KPIC -O"}
+             CFLAGS=${CFLAGS-"-O"}
+             LDSHARED=${LDSHARED-"cc -G"} ;;
+  AIX*)  # Courtesy of dbakker@arrayasolutions.com
+             SFLAGS=${CFLAGS-"-O -qmaxmem=8192"}
+             CFLAGS=${CFLAGS-"-O -qmaxmem=8192"}
+             LDSHARED=${LDSHARED-"xlc -G"} ;;
+  # send working options for other systems to zlib@gzip.org
+  *)         SFLAGS=${CFLAGS-"-O"}
+             CFLAGS=${CFLAGS-"-O"}
+             LDSHARED=${LDSHARED-"cc -shared"} ;;
+  esac
+fi
+
+SHAREDLIB=${SHAREDLIB-"libz$shared_ext"}
+SHAREDLIBV=${SHAREDLIBV-"libz$shared_ext.$VER"}
+SHAREDLIBM=${SHAREDLIBM-"libz$shared_ext.$VER1"}
+
+if test $shared -eq 1; then
+  echo Checking for shared library support...
+  # we must test in two steps (cc then ld), required at least on SunOS 4.x
+  if test "`($CC -w -c $SFLAGS $test.c) 2>&1`" = "" &&
+     test "`($LDSHARED $SFLAGS -o $test$shared_ext $test.o) 2>&1`" = ""; then
+    echo Building shared library $SHAREDLIBV with $CC.
+  elif test -z "$old_cc" -a -z "$old_cflags"; then
+    echo No shared library support.
+    shared=0;
+  else
+    echo Tested $CC -w -c $SFLAGS $test.c
+    $CC -w -c $SFLAGS $test.c
+    echo Tested $LDSHARED $SFLAGS -o $test$shared_ext $test.o
+    $LDSHARED $SFLAGS -o $test$shared_ext $test.o
+    echo 'No shared library support; try without defining CC and CFLAGS'
+    shared=0;
+  fi
+fi
+if test $shared -eq 0; then
+  LDSHARED="$CC"
+  ALL="static"
+  TEST="all teststatic"
+  SHAREDLIB=""
+  SHAREDLIBV=""
+  SHAREDLIBM=""
+  echo Building static library $STATICLIB version $VER with $CC.
+else
+  ALL="static shared"
+  TEST="all teststatic testshared"
+fi
+
+cat > $test.c <<EOF
+#include <sys/types.h>
+off64_t dummy = 0;
+EOF
+if test "`($CC -c $CFLAGS -D_LARGEFILE64_SOURCE=1 $test.c) 2>&1`" = ""; then
+  CFLAGS="${CFLAGS} -D_LARGEFILE64_SOURCE=1"
+  SFLAGS="${SFLAGS} -D_LARGEFILE64_SOURCE=1"
+  ALL="${ALL} all64"
+  TEST="${TEST} test64"
+  echo "Checking for off64_t... Yes."
+  echo "Checking for fseeko... Yes."
+else
+  echo "Checking for off64_t... No."
+  cat > $test.c <<EOF
+#include <stdio.h>
+int main(void) {
+  fseeko(NULL, 0, 0);
+  return 0;
+}
+EOF
+  if test "`($CC $CFLAGS -o $test $test.c) 2>&1`" = ""; then
+    echo "Checking for fseeko... Yes."
+  else
+    CFLAGS="${CFLAGS} -DNO_FSEEKO"
+    SFLAGS="${SFLAGS} -DNO_FSEEKO"
+    echo "Checking for fseeko... No."
+  fi
+fi
+
+cp -p zconf.h.in zconf.h
+
+cat > $test.c <<EOF
+#include <unistd.h>
+int main() { return 0; }
+EOF
+if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+  sed < zconf.h "/^#ifdef HAVE_UNISTD_H.* may be/s/def HAVE_UNISTD_H\(.*\) may be/ 1\1 was/" > zconf.temp.h
+  mv zconf.temp.h zconf.h
+  echo "Checking for unistd.h... Yes."
+else
+  echo "Checking for unistd.h... No."
+fi
+
+if test $zprefix -eq 1; then
+  sed < zconf.h "/#ifdef Z_PREFIX.* may be/s/def Z_PREFIX\(.*\) may be/ 1\1 was/" > zconf.temp.h
+  mv zconf.temp.h zconf.h
+  echo "Using z_ prefix on all symbols."
+fi
+
+cat > $test.c <<EOF
+#include <stdio.h>
+#include <stdarg.h>
+#include "zconf.h"
+
+int main()
+{
+#ifndef STDC
+  choke me
+#endif
+
+  return 0;
+}
+EOF
+
+if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+  echo "Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf()."
+
+  cat > $test.c <<EOF
+#include <stdio.h>
+#include <stdarg.h>
+
+int mytest(const char *fmt, ...)
+{
+  char buf[20];
+  va_list ap;
+
+  va_start(ap, fmt);
+  vsnprintf(buf, sizeof(buf), fmt, ap);
+  va_end(ap);
+  return 0;
+}
+
+int main()
+{
+  return (mytest("Hello%d\n", 1));
+}
+EOF
+
+  if test "`($CC $CFLAGS -o $test $test.c) 2>&1`" = ""; then
+    echo "Checking for vsnprintf() in stdio.h... Yes."
+
+    cat >$test.c <<EOF
+#include <stdio.h>
+#include <stdarg.h>
+
+int mytest(const char *fmt, ...)
+{
+  int n;
+  char buf[20];
+  va_list ap;
+
+  va_start(ap, fmt);
+  n = vsnprintf(buf, sizeof(buf), fmt, ap);
+  va_end(ap);
+  return n;
+}
+
+int main()
+{
+  return (mytest("Hello%d\n", 1));
+}
+EOF
+
+    if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+      echo "Checking for return value of vsnprintf()... Yes."
+    else
+      CFLAGS="$CFLAGS -DHAS_vsnprintf_void"
+      SFLAGS="$SFLAGS -DHAS_vsnprintf_void"
+      echo "Checking for return value of vsnprintf()... No."
+      echo "  WARNING: apparently vsnprintf() does not return a value. zlib"
+      echo "  can build but will be open to possible string-format security"
+      echo "  vulnerabilities."
+    fi
+  else
+    CFLAGS="$CFLAGS -DNO_vsnprintf"
+    SFLAGS="$SFLAGS -DNO_vsnprintf"
+    echo "Checking for vsnprintf() in stdio.h... No."
+    echo "  WARNING: vsnprintf() not found, falling back to vsprintf(). zlib"
+    echo "  can build but will be open to possible buffer-overflow security"
+    echo "  vulnerabilities."
+
+    cat >$test.c <<EOF
+#include <stdio.h>
+#include <stdarg.h>
+
+int mytest(const char *fmt, ...)
+{
+  int n;
+  char buf[20];
+  va_list ap;
+
+  va_start(ap, fmt);
+  n = vsprintf(buf, fmt, ap);
+  va_end(ap);
+  return n;
+}
+
+int main()
+{
+  return (mytest("Hello%d\n", 1));
+}
+EOF
+
+    if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+      echo "Checking for return value of vsprintf()... Yes."
+    else
+      CFLAGS="$CFLAGS -DHAS_vsprintf_void"
+      SFLAGS="$SFLAGS -DHAS_vsprintf_void"
+      echo "Checking for return value of vsprintf()... No."
+      echo "  WARNING: apparently vsprintf() does not return a value. zlib"
+      echo "  can build but will be open to possible string-format security"
+      echo "  vulnerabilities."
+    fi
+  fi
+else
+  echo "Checking whether to use vs[n]printf() or s[n]printf()... using s[n]printf()."
+
+  cat >$test.c <<EOF
+#include <stdio.h>
+
+int mytest()
+{
+  char buf[20];
+
+  snprintf(buf, sizeof(buf), "%s", "foo");
+  return 0;
+}
+
+int main()
+{
+  return (mytest());
+}
+EOF
+
+  if test "`($CC $CFLAGS -o $test $test.c) 2>&1`" = ""; then
+    echo "Checking for snprintf() in stdio.h... Yes."
+
+    cat >$test.c <<EOF
+#include <stdio.h>
+
+int mytest()
+{
+  char buf[20];
+
+  return snprintf(buf, sizeof(buf), "%s", "foo");
+}
+
+int main()
+{
+  return (mytest());
+}
+EOF
+
+    if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+      echo "Checking for return value of snprintf()... Yes."
+    else
+      CFLAGS="$CFLAGS -DHAS_snprintf_void"
+      SFLAGS="$SFLAGS -DHAS_snprintf_void"
+      echo "Checking for return value of snprintf()... No."
+      echo "  WARNING: apparently snprintf() does not return a value. zlib"
+      echo "  can build but will be open to possible string-format security"
+      echo "  vulnerabilities."
+    fi
+  else
+    CFLAGS="$CFLAGS -DNO_snprintf"
+    SFLAGS="$SFLAGS -DNO_snprintf"
+    echo "Checking for snprintf() in stdio.h... No."
+    echo "  WARNING: snprintf() not found, falling back to sprintf(). zlib"
+    echo "  can build but will be open to possible buffer-overflow security"
+    echo "  vulnerabilities."
+
+    cat >$test.c <<EOF
+#include <stdio.h>
+
+int mytest()
+{
+  char buf[20];
+
+  return sprintf(buf, "%s", "foo");
+}
+
+int main()
+{
+  return (mytest());
+}
+EOF
+
+    if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+      echo "Checking for return value of sprintf()... Yes."
+    else
+      CFLAGS="$CFLAGS -DHAS_sprintf_void"
+      SFLAGS="$SFLAGS -DHAS_sprintf_void"
+      echo "Checking for return value of sprintf()... No."
+      echo "  WARNING: apparently sprintf() does not return a value. zlib"
+      echo "  can build but will be open to possible string-format security"
+      echo "  vulnerabilities."
+    fi
+  fi
+fi
+
+if test "$gcc" -eq 1; then
+  cat > $test.c <<EOF
+#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33)
+#  define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
+#else
+#  define ZLIB_INTERNAL
+#endif
+int ZLIB_INTERNAL foo;
+int main()
+{
+  return 0;
+}
+EOF
+  if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
+    echo "Checking for attribute(visibility) support... Yes."
+  else
+    CFLAGS="$CFLAGS -DNO_VIZ"
+    SFLAGS="$SFLAGS -DNO_VIZ"
+    echo "Checking for attribute(visibility) support... No."
+  fi
+fi
+
+CPP=${CPP-"$CC -E"}
+case $CFLAGS in
+  *ASMV*)
+    if test "`$NM $test.o | grep _hello`" = ""; then
+      CPP="$CPP -DNO_UNDERLINE"
+      echo Checking for underline in external names... No.
+    else
+      echo Checking for underline in external names... Yes.
+    fi ;;
+esac
+
+rm -f $test.[co] $test $test$shared_ext
+
+# udpate Makefile
+sed < Makefile.in "
+/^CC *=/s#=.*#=$CC#
+/^CFLAGS *=/s#=.*#=$CFLAGS#
+/^SFLAGS *=/s#=.*#=$SFLAGS#
+/^LDFLAGS *=/s#=.*#=$LDFLAGS#
+/^LDSHARED *=/s#=.*#=$LDSHARED#
+/^CPP *=/s#=.*#=$CPP#
+/^STATICLIB *=/s#=.*#=$STATICLIB#
+/^SHAREDLIB *=/s#=.*#=$SHAREDLIB#
+/^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV#
+/^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM#
+/^AR *=/s#=.*#=$AR_RC#
+/^RANLIB *=/s#=.*#=$RANLIB#
+/^LDCONFIG *=/s#=.*#=$LDCONFIG#
+/^LDSHAREDLIBC *=/s#=.*#=$LDSHAREDLIBC#
+/^EXE *=/s#=.*#=$EXE#
+/^prefix *=/s#=.*#=$prefix#
+/^exec_prefix *=/s#=.*#=$exec_prefix#
+/^libdir *=/s#=.*#=$libdir#
+/^sharedlibdir *=/s#=.*#=$sharedlibdir#
+/^includedir *=/s#=.*#=$includedir#
+/^mandir *=/s#=.*#=$mandir#
+/^all: */s#:.*#: $ALL#
+/^test: */s#:.*#: $TEST#
+" > Makefile
+
+sed < zlib.pc.in "
+/^CC *=/s#=.*#=$CC#
+/^CFLAGS *=/s#=.*#=$CFLAGS#
+/^CPP *=/s#=.*#=$CPP#
+/^LDSHARED *=/s#=.*#=$LDSHARED#
+/^STATICLIB *=/s#=.*#=$STATICLIB#
+/^SHAREDLIB *=/s#=.*#=$SHAREDLIB#
+/^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV#
+/^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM#
+/^AR *=/s#=.*#=$AR_RC#
+/^RANLIB *=/s#=.*#=$RANLIB#
+/^EXE *=/s#=.*#=$EXE#
+/^prefix *=/s#=.*#=$prefix#
+/^exec_prefix *=/s#=.*#=$exec_prefix#
+/^libdir *=/s#=.*#=$libdir#
+/^sharedlibdir *=/s#=.*#=$sharedlibdir#
+/^includedir *=/s#=.*#=$includedir#
+/^mandir *=/s#=.*#=$mandir#
+/^LDFLAGS *=/s#=.*#=$LDFLAGS#
+" | sed -e "
+s/\@VERSION\@/$VER/g;
+" > zlib.pc

contrib/README.contrib

@@ -0,0 +1,77 @@
+All files under this contrib directory are UNSUPPORTED. There were
+provided by users of zlib and were not tested by the authors of zlib.
+Use at your own risk. Please contact the authors of the contributions
+for help about these, not the zlib authors. Thanks.
+
+
+ada/        by Dmitriy Anisimkov <anisimkov@yahoo.com>
+        Support for Ada
+        See http://zlib-ada.sourceforge.net/
+
+amd64/      by Mikhail Teterin <mi@ALDAN.algebra.com>
+        asm code for AMD64
+        See patch at http://www.freebsd.org/cgi/query-pr.cgi?pr=bin/96393
+
+asm686/     by Brian Raiter <breadbox@muppetlabs.com>
+        asm code for Pentium and PPro/PII, using the AT&T (GNU as) syntax
+        See http://www.muppetlabs.com/~breadbox/software/assembly.html
+
+blast/      by Mark Adler <madler@alumni.caltech.edu>
+        Decompressor for output of PKWare Data Compression Library (DCL)
+
+delphi/     by Cosmin Truta <cosmint@cs.ubbcluj.ro>
+        Support for Delphi and C++ Builder
+
+dotzlib/    by Henrik Ravn <henrik@ravn.com>
+        Support for Microsoft .Net and Visual C++ .Net
+
+gcc_gvmat64/by Gilles Vollant <info@winimage.com>
+        GCC Version of x86 64-bit (AMD64 and Intel EM64t) code for x64
+        assembler to replace longest_match() and inflate_fast()
+
+infback9/   by Mark Adler <madler@alumni.caltech.edu>
+        Unsupported diffs to infback to decode the deflate64 format
+
+inflate86/  by Chris Anderson <christop@charm.net>
+        Tuned x86 gcc asm code to replace inflate_fast()
+
+iostream/   by Kevin Ruland <kevin@rodin.wustl.edu>
+        A C++ I/O streams interface to the zlib gz* functions
+
+iostream2/  by Tyge L<>vset <Tyge.Lovset@cmr.no>
+        Another C++ I/O streams interface
+
+iostream3/  by Ludwig Schwardt <schwardt@sun.ac.za>
+            and Kevin Ruland <kevin@rodin.wustl.edu>
+        Yet another C++ I/O streams interface
+
+masmx64/    by Gilles Vollant <info@winimage.com>
+        x86 64-bit (AMD64 and Intel EM64t) code for x64 assembler to
+        replace longest_match() and inflate_fast(),  also masm x86
+        64-bits translation of Chris Anderson inflate_fast()
+
+masmx86/    by Gilles Vollant <info@winimage.com>
+        x86 asm code to replace longest_match() and inflate_fast(),
+        for Visual C++ and MASM (32 bits).
+        Based on Brian Raiter (asm686) and Chris Anderson (inflate86)
+
+minizip/    by Gilles Vollant <info@winimage.com>
+        Mini zip and unzip based on zlib
+        Includes Zip64 support by Mathias Svensson <mathias@result42.com>
+        See http://www.winimage.com/zLibDll/unzip.html
+
+pascal/     by Bob Dellaca <bobdl@xtra.co.nz> et al.
+        Support for Pascal
+
+puff/       by Mark Adler <madler@alumni.caltech.edu>
+        Small, low memory usage inflate.  Also serves to provide an
+        unambiguous description of the deflate format.
+
+testzlib/   by Gilles Vollant <info@winimage.com>
+        Example of the use of zlib
+
+untgz/      by Pedro A. Aranda Gutierrez <paag@tid.es>
+        A very simple tar.gz file extractor using zlib
+
+vstudio/    by Gilles Vollant <info@winimage.com>
+        Building a minizip-enhanced zlib with Microsoft Visual Studio

contrib/ada/buffer_demo.adb

@@ -0,0 +1,106 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2004 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+--
+--  $Id: buffer_demo.adb,v 1.3 2004/09/06 06:55:35 vagul Exp $
+
+--  This demo program provided by Dr Steve Sangwine <sjs@essex.ac.uk>
+--
+--  Demonstration of a problem with Zlib-Ada (already fixed) when a buffer
+--  of exactly the correct size is used for decompressed data, and the last
+--  few bytes passed in to Zlib are checksum bytes.
+
+--  This program compresses a string of text, and then decompresses the
+--  compressed text into a buffer of the same size as the original text.
+
+with Ada.Streams; use Ada.Streams;
+with Ada.Text_IO;
+
+with ZLib; use ZLib;
+
+procedure Buffer_Demo is
+   EOL  : Character renames ASCII.LF;
+   Text : constant String
+     := "Four score and seven years ago our fathers brought forth," & EOL &
+        "upon this continent, a new nation, conceived in liberty," & EOL &
+        "and dedicated to the proposition that `all men are created equal'.";
+
+   Source : Stream_Element_Array (1 .. Text'Length);
+   for Source'Address use Text'Address;
+
+begin
+   Ada.Text_IO.Put (Text);
+   Ada.Text_IO.New_Line;
+   Ada.Text_IO.Put_Line
+     ("Uncompressed size : " & Positive'Image (Text'Length) & " bytes");
+
+   declare
+      Compressed_Data : Stream_Element_Array (1 .. Text'Length);
+      L               : Stream_Element_Offset;
+   begin
+      Compress : declare
+         Compressor : Filter_Type;
+         I : Stream_Element_Offset;
+      begin
+         Deflate_Init (Compressor);
+
+         --  Compress the whole of T at once.
+
+         Translate (Compressor, Source, I, Compressed_Data, L, Finish);
+         pragma Assert (I = Source'Last);
+
+         Close (Compressor);
+
+         Ada.Text_IO.Put_Line
+           ("Compressed size :   "
+            & Stream_Element_Offset'Image (L) & " bytes");
+      end Compress;
+
+      --  Now we decompress the data, passing short blocks of data to Zlib
+      --  (because this demonstrates the problem - the last block passed will
+      --  contain checksum information and there will be no output, only a
+      --  check inside Zlib that the checksum is correct).
+
+      Decompress : declare
+         Decompressor : Filter_Type;
+
+         Uncompressed_Data : Stream_Element_Array (1 .. Text'Length);
+
+         Block_Size : constant := 4;
+         --  This makes sure that the last block contains
+         --  only Adler checksum data.
+
+         P : Stream_Element_Offset := Compressed_Data'First - 1;
+         O : Stream_Element_Offset;
+      begin
+         Inflate_Init (Decompressor);
+
+         loop
+            Translate
+              (Decompressor,
+               Compressed_Data
+                 (P + 1 .. Stream_Element_Offset'Min (P + Block_Size, L)),
+               P,
+               Uncompressed_Data
+                 (Total_Out (Decompressor) + 1 .. Uncompressed_Data'Last),
+               O,
+               No_Flush);
+
+               Ada.Text_IO.Put_Line
+                 ("Total in : " & Count'Image (Total_In (Decompressor)) &
+                  ", out : " & Count'Image (Total_Out (Decompressor)));
+
+               exit when P = L;
+         end loop;
+
+         Ada.Text_IO.New_Line;
+         Ada.Text_IO.Put_Line
+           ("Decompressed text matches original text : "
+             & Boolean'Image (Uncompressed_Data = Source));
+      end Decompress;
+   end;
+end Buffer_Demo;

contrib/ada/mtest.adb

@@ -0,0 +1,156 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+--  Continuous test for ZLib multithreading. If the test would fail
+--  we should provide thread safe allocation routines for the Z_Stream.
+--
+--  $Id: mtest.adb,v 1.4 2004/07/23 07:49:54 vagul Exp $
+
+with ZLib;
+with Ada.Streams;
+with Ada.Numerics.Discrete_Random;
+with Ada.Text_IO;
+with Ada.Exceptions;
+with Ada.Task_Identification;
+
+procedure MTest is
+   use Ada.Streams;
+   use ZLib;
+
+   Stop : Boolean := False;
+
+   pragma Atomic (Stop);
+
+   subtype Visible_Symbols is Stream_Element range 16#20# .. 16#7E#;
+
+   package Random_Elements is
+      new Ada.Numerics.Discrete_Random (Visible_Symbols);
+
+   task type Test_Task;
+
+   task body Test_Task is
+      Buffer : Stream_Element_Array (1 .. 100_000);
+      Gen : Random_Elements.Generator;
+
+      Buffer_First  : Stream_Element_Offset;
+      Compare_First : Stream_Element_Offset;
+
+      Deflate : Filter_Type;
+      Inflate : Filter_Type;
+
+      procedure Further (Item : in Stream_Element_Array);
+
+      procedure Read_Buffer
+        (Item : out Ada.Streams.Stream_Element_Array;
+         Last : out Ada.Streams.Stream_Element_Offset);
+
+      -------------
+      -- Further --
+      -------------
+
+      procedure Further (Item : in Stream_Element_Array) is
+
+         procedure Compare (Item : in Stream_Element_Array);
+
+         -------------
+         -- Compare --
+         -------------
+
+         procedure Compare (Item : in Stream_Element_Array) is
+            Next_First : Stream_Element_Offset := Compare_First + Item'Length;
+         begin
+            if Buffer (Compare_First .. Next_First - 1) /= Item then
+               raise Program_Error;
+            end if;
+
+            Compare_First := Next_First;
+         end Compare;
+
+         procedure Compare_Write is new ZLib.Write (Write => Compare);
+      begin
+         Compare_Write (Inflate, Item, No_Flush);
+      end Further;
+
+      -----------------
+      -- Read_Buffer --
+      -----------------
+
+      procedure Read_Buffer
+        (Item : out Ada.Streams.Stream_Element_Array;
+         Last : out Ada.Streams.Stream_Element_Offset)
+      is
+         Buff_Diff   : Stream_Element_Offset := Buffer'Last - Buffer_First;
+         Next_First : Stream_Element_Offset;
+      begin
+         if Item'Length <= Buff_Diff then
+            Last := Item'Last;
+
+            Next_First := Buffer_First + Item'Length;
+
+            Item := Buffer (Buffer_First .. Next_First - 1);
+
+            Buffer_First := Next_First;
+         else
+            Last := Item'First + Buff_Diff;
+            Item (Item'First .. Last) := Buffer (Buffer_First .. Buffer'Last);
+            Buffer_First := Buffer'Last + 1;
+         end if;
+      end Read_Buffer;
+
+      procedure Translate is new Generic_Translate
+                                   (Data_In  => Read_Buffer,
+                                    Data_Out => Further);
+
+   begin
+      Random_Elements.Reset (Gen);
+
+      Buffer := (others => 20);
+
+      Main : loop
+         for J in Buffer'Range loop
+            Buffer (J) := Random_Elements.Random (Gen);
+
+            Deflate_Init (Deflate);
+            Inflate_Init (Inflate);
+
+            Buffer_First  := Buffer'First;
+            Compare_First := Buffer'First;
+
+            Translate (Deflate);
+
+            if Compare_First /= Buffer'Last + 1 then
+               raise Program_Error;
+            end if;
+
+            Ada.Text_IO.Put_Line
+              (Ada.Task_Identification.Image
+                 (Ada.Task_Identification.Current_Task)
+               & Stream_Element_Offset'Image (J)
+               & ZLib.Count'Image (Total_Out (Deflate)));
+
+            Close (Deflate);
+            Close (Inflate);
+
+            exit Main when Stop;
+         end loop;
+      end loop Main;
+   exception
+      when E : others =>
+         Ada.Text_IO.Put_Line (Ada.Exceptions.Exception_Information (E));
+         Stop := True;
+   end Test_Task;
+
+   Test : array (1 .. 4) of Test_Task;
+
+   pragma Unreferenced (Test);
+
+   Dummy : Character;
+
+begin
+   Ada.Text_IO.Get_Immediate (Dummy);
+   Stop := True;
+end MTest;

contrib/ada/read.adb

@@ -0,0 +1,156 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+
+--  $Id: read.adb,v 1.8 2004/05/31 10:53:40 vagul Exp $
+
+--  Test/demo program for the generic read interface.
+
+with Ada.Numerics.Discrete_Random;
+with Ada.Streams;
+with Ada.Text_IO;
+
+with ZLib;
+
+procedure Read is
+
+   use Ada.Streams;
+
+   ------------------------------------
+   --  Test configuration parameters --
+   ------------------------------------
+
+   File_Size   : Stream_Element_Offset := 100_000;
+
+   Continuous  : constant Boolean          := False;
+   --  If this constant is True, the test would be repeated again and again,
+   --  with increment File_Size for every iteration.
+
+   Header      : constant ZLib.Header_Type := ZLib.Default;
+   --  Do not use Header other than Default in ZLib versions 1.1.4 and older.
+
+   Init_Random : constant := 8;
+   --  We are using the same random sequence, in case of we catch bug,
+   --  so we would be able to reproduce it.
+
+   -- End --
+
+   Pack_Size : Stream_Element_Offset;
+   Offset    : Stream_Element_Offset;
+
+   Filter     : ZLib.Filter_Type;
+
+   subtype Visible_Symbols
+      is Stream_Element range 16#20# .. 16#7E#;
+
+   package Random_Elements is new
+      Ada.Numerics.Discrete_Random (Visible_Symbols);
+
+   Gen : Random_Elements.Generator;
+   Period  : constant Stream_Element_Offset := 200;
+   --  Period constant variable for random generator not to be very random.
+   --  Bigger period, harder random.
+
+   Read_Buffer : Stream_Element_Array (1 .. 2048);
+   Read_First  : Stream_Element_Offset;
+   Read_Last   : Stream_Element_Offset;
+
+   procedure Reset;
+
+   procedure Read
+     (Item : out Stream_Element_Array;
+      Last : out Stream_Element_Offset);
+   --  this procedure is for generic instantiation of
+   --  ZLib.Read
+   --  reading data from the File_In.
+
+   procedure Read is new ZLib.Read
+                           (Read,
+                            Read_Buffer,
+                            Rest_First => Read_First,
+                            Rest_Last  => Read_Last);
+
+   ----------
+   -- Read --
+   ----------
+
+   procedure Read
+     (Item : out Stream_Element_Array;
+      Last : out Stream_Element_Offset) is
+   begin
+      Last := Stream_Element_Offset'Min
+               (Item'Last,
+                Item'First + File_Size - Offset);
+
+      for J in Item'First .. Last loop
+         if J < Item'First + Period then
+            Item (J) := Random_Elements.Random (Gen);
+         else
+            Item (J) := Item (J - Period);
+         end if;
+
+         Offset   := Offset + 1;
+      end loop;
+   end Read;
+
+   -----------
+   -- Reset --
+   -----------
+
+   procedure Reset is
+   begin
+      Random_Elements.Reset (Gen, Init_Random);
+      Pack_Size := 0;
+      Offset := 1;
+      Read_First := Read_Buffer'Last + 1;
+      Read_Last  := Read_Buffer'Last;
+   end Reset;
+
+begin
+   Ada.Text_IO.Put_Line ("ZLib " & ZLib.Version);
+
+   loop
+      for Level in ZLib.Compression_Level'Range loop
+
+         Ada.Text_IO.Put ("Level ="
+            & ZLib.Compression_Level'Image (Level));
+
+         --  Deflate using generic instantiation.
+
+         ZLib.Deflate_Init
+               (Filter,
+                Level,
+                Header => Header);
+
+         Reset;
+
+         Ada.Text_IO.Put
+           (Stream_Element_Offset'Image (File_Size) & " ->");
+
+         loop
+            declare
+               Buffer : Stream_Element_Array (1 .. 1024);
+               Last   : Stream_Element_Offset;
+            begin
+               Read (Filter, Buffer, Last);
+
+               Pack_Size := Pack_Size + Last - Buffer'First + 1;
+
+               exit when Last < Buffer'Last;
+            end;
+         end loop;
+
+         Ada.Text_IO.Put_Line (Stream_Element_Offset'Image (Pack_Size));
+
+         ZLib.Close (Filter);
+      end loop;
+
+      exit when not Continuous;
+
+      File_Size := File_Size + 1;
+   end loop;
+end Read;

contrib/ada/readme.txt

@@ -0,0 +1,65 @@
+                        ZLib for Ada thick binding (ZLib.Ada)
+                        Release 1.3
+
+ZLib.Ada is a thick binding interface to the popular ZLib data
+compression library, available at http://www.gzip.org/zlib/.
+It provides Ada-style access to the ZLib C library.
+
+
+        Here are the main changes since ZLib.Ada 1.2:
+
+- Attension: ZLib.Read generic routine have a initialization requirement
+  for Read_Last parameter now. It is a bit incompartible with previous version,
+  but extends functionality, we could use new parameters Allow_Read_Some and
+  Flush now.
+
+- Added Is_Open routines to ZLib and ZLib.Streams packages.
+
+- Add pragma Assert to check Stream_Element is 8 bit.
+
+- Fix extraction to buffer with exact known decompressed size. Error reported by
+  Steve Sangwine.
+
+- Fix definition of ULong (changed to unsigned_long), fix regression on 64 bits
+  computers. Patch provided by Pascal Obry.
+
+- Add Status_Error exception definition.
+
+- Add pragma Assertion that Ada.Streams.Stream_Element size is 8 bit.
+
+
+        How to build ZLib.Ada under GNAT
+
+You should have the ZLib library already build on your computer, before
+building ZLib.Ada. Make the directory of ZLib.Ada sources current and
+issue the command:
+
+  gnatmake test -largs -L<directory where libz.a is> -lz
+
+Or use the GNAT project file build for GNAT 3.15 or later:
+
+  gnatmake -Pzlib.gpr -L<directory where libz.a is>
+
+
+        How to build ZLib.Ada under Aonix ObjectAda for Win32 7.2.2
+
+1. Make a project with all *.ads and *.adb files from the distribution.
+2. Build the libz.a library from the ZLib C sources.
+3. Rename libz.a to z.lib.
+4. Add the library z.lib to the project.
+5. Add the libc.lib library from the ObjectAda distribution to the project.
+6. Build the executable using test.adb as a main procedure.
+
+
+        How to use ZLib.Ada
+
+The source files test.adb and read.adb are small demo programs that show
+the main functionality of ZLib.Ada.
+
+The routines from the package specifications are commented.
+
+
+Homepage: http://zlib-ada.sourceforge.net/
+Author: Dmitriy Anisimkov <anisimkov@yahoo.com>
+
+Contributors: Pascal Obry <pascal@obry.org>, Steve Sangwine <sjs@essex.ac.uk>

contrib/ada/test.adb

@@ -0,0 +1,463 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+
+--  $Id: test.adb,v 1.17 2003/08/12 12:13:30 vagul Exp $
+
+--  The program has a few aims.
+--  1. Test ZLib.Ada95 thick binding functionality.
+--  2. Show the example of use main functionality of the ZLib.Ada95 binding.
+--  3. Build this program automatically compile all ZLib.Ada95 packages under
+--     GNAT Ada95 compiler.
+
+with ZLib.Streams;
+with Ada.Streams.Stream_IO;
+with Ada.Numerics.Discrete_Random;
+
+with Ada.Text_IO;
+
+with Ada.Calendar;
+
+procedure Test is
+
+   use Ada.Streams;
+   use Stream_IO;
+
+   ------------------------------------
+   --  Test configuration parameters --
+   ------------------------------------
+
+   File_Size   : Count   := 100_000;
+   Continuous  : constant Boolean := False;
+
+   Header      : constant ZLib.Header_Type := ZLib.Default;
+                                              --  ZLib.None;
+                                              --  ZLib.Auto;
+                                              --  ZLib.GZip;
+   --  Do not use Header other then Default in ZLib versions 1.1.4
+   --  and older.
+
+   Strategy    : constant ZLib.Strategy_Type := ZLib.Default_Strategy;
+   Init_Random : constant := 10;
+
+   -- End --
+
+   In_File_Name  : constant String := "testzlib.in";
+   --  Name of the input file
+
+   Z_File_Name   : constant String := "testzlib.zlb";
+   --  Name of the compressed file.
+
+   Out_File_Name : constant String := "testzlib.out";
+   --  Name of the decompressed file.
+
+   File_In   : File_Type;
+   File_Out  : File_Type;
+   File_Back : File_Type;
+   File_Z    : ZLib.Streams.Stream_Type;
+
+   Filter : ZLib.Filter_Type;
+
+   Time_Stamp : Ada.Calendar.Time;
+
+   procedure Generate_File;
+   --  Generate file of spetsified size with some random data.
+   --  The random data is repeatable, for the good compression.
+
+   procedure Compare_Streams
+     (Left, Right : in out Root_Stream_Type'Class);
+   --  The procedure compearing data in 2 streams.
+   --  It is for compare data before and after compression/decompression.
+
+   procedure Compare_Files (Left, Right : String);
+   --  Compare files. Based on the Compare_Streams.
+
+   procedure Copy_Streams
+     (Source, Target : in out Root_Stream_Type'Class;
+      Buffer_Size    : in     Stream_Element_Offset := 1024);
+   --  Copying data from one stream to another. It is for test stream
+   --  interface of the library.
+
+   procedure Data_In
+     (Item : out Stream_Element_Array;
+      Last : out Stream_Element_Offset);
+   --  this procedure is for generic instantiation of
+   --  ZLib.Generic_Translate.
+   --  reading data from the File_In.
+
+   procedure Data_Out (Item : in Stream_Element_Array);
+   --  this procedure is for generic instantiation of
+   --  ZLib.Generic_Translate.
+   --  writing data to the File_Out.
+
+   procedure Stamp;
+   --  Store the timestamp to the local variable.
+
+   procedure Print_Statistic (Msg : String; Data_Size : ZLib.Count);
+   --  Print the time statistic with the message.
+
+   procedure Translate is new ZLib.Generic_Translate
+                                (Data_In  => Data_In,
+                                 Data_Out => Data_Out);
+   --  This procedure is moving data from File_In to File_Out
+   --  with compression or decompression, depend on initialization of
+   --  Filter parameter.
+
+   -------------------
+   -- Compare_Files --
+   -------------------
+
+   procedure Compare_Files (Left, Right : String) is
+      Left_File, Right_File : File_Type;
+   begin
+      Open (Left_File, In_File, Left);
+      Open (Right_File, In_File, Right);
+      Compare_Streams (Stream (Left_File).all, Stream (Right_File).all);
+      Close (Left_File);
+      Close (Right_File);
+   end Compare_Files;
+
+   ---------------------
+   -- Compare_Streams --
+   ---------------------
+
+   procedure Compare_Streams
+     (Left, Right : in out Ada.Streams.Root_Stream_Type'Class)
+   is
+      Left_Buffer, Right_Buffer : Stream_Element_Array (0 .. 16#FFF#);
+      Left_Last, Right_Last : Stream_Element_Offset;
+   begin
+      loop
+         Read (Left, Left_Buffer, Left_Last);
+         Read (Right, Right_Buffer, Right_Last);
+
+         if Left_Last /= Right_Last then
+            Ada.Text_IO.Put_Line ("Compare error :"
+              & Stream_Element_Offset'Image (Left_Last)
+              & " /= "
+              & Stream_Element_Offset'Image (Right_Last));
+
+            raise Constraint_Error;
+
+         elsif Left_Buffer (0 .. Left_Last)
+               /= Right_Buffer (0 .. Right_Last)
+         then
+            Ada.Text_IO.Put_Line ("ERROR: IN and OUT files is not equal.");
+            raise Constraint_Error;
+
+         end if;
+
+         exit when Left_Last < Left_Buffer'Last;
+      end loop;
+   end Compare_Streams;
+
+   ------------------
+   -- Copy_Streams --
+   ------------------
+
+   procedure Copy_Streams
+     (Source, Target : in out Ada.Streams.Root_Stream_Type'Class;
+      Buffer_Size    : in     Stream_Element_Offset := 1024)
+   is
+      Buffer : Stream_Element_Array (1 .. Buffer_Size);
+      Last   : Stream_Element_Offset;
+   begin
+      loop
+         Read  (Source, Buffer, Last);
+         Write (Target, Buffer (1 .. Last));
+
+         exit when Last < Buffer'Last;
+      end loop;
+   end Copy_Streams;
+
+   -------------
+   -- Data_In --
+   -------------
+
+   procedure Data_In
+     (Item : out Stream_Element_Array;
+      Last : out Stream_Element_Offset) is
+   begin
+      Read (File_In, Item, Last);
+   end Data_In;
+
+   --------------
+   -- Data_Out --
+   --------------
+
+   procedure Data_Out (Item : in Stream_Element_Array) is
+   begin
+      Write (File_Out, Item);
+   end Data_Out;
+
+   -------------------
+   -- Generate_File --
+   -------------------
+
+   procedure Generate_File is
+      subtype Visible_Symbols is Stream_Element range 16#20# .. 16#7E#;
+
+      package Random_Elements is
+         new Ada.Numerics.Discrete_Random (Visible_Symbols);
+
+      Gen    : Random_Elements.Generator;
+      Buffer : Stream_Element_Array := (1 .. 77 => 16#20#) & 10;
+
+      Buffer_Count : constant Count := File_Size / Buffer'Length;
+      --  Number of same buffers in the packet.
+
+      Density : constant Count := 30; --  from 0 to Buffer'Length - 2;
+
+      procedure Fill_Buffer (J, D : in Count);
+      --  Change the part of the buffer.
+
+      -----------------
+      -- Fill_Buffer --
+      -----------------
+
+      procedure Fill_Buffer (J, D : in Count) is
+      begin
+         for K in 0 .. D loop
+            Buffer
+              (Stream_Element_Offset ((J + K) mod (Buffer'Length - 1) + 1))
+             := Random_Elements.Random (Gen);
+
+         end loop;
+      end Fill_Buffer;
+
+   begin
+      Random_Elements.Reset (Gen, Init_Random);
+
+      Create (File_In, Out_File, In_File_Name);
+
+      Fill_Buffer (1, Buffer'Length - 2);
+
+      for J in 1 .. Buffer_Count loop
+         Write (File_In, Buffer);
+
+         Fill_Buffer (J, Density);
+      end loop;
+
+      --  fill remain size.
+
+      Write
+        (File_In,
+         Buffer
+           (1 .. Stream_Element_Offset
+                   (File_Size - Buffer'Length * Buffer_Count)));
+
+      Flush (File_In);
+      Close (File_In);
+   end Generate_File;
+
+   ---------------------
+   -- Print_Statistic --
+   ---------------------
+
+   procedure Print_Statistic (Msg : String; Data_Size : ZLib.Count) is
+      use Ada.Calendar;
+      use Ada.Text_IO;
+
+      package Count_IO is new Integer_IO (ZLib.Count);
+
+      Curr_Dur : Duration := Clock - Time_Stamp;
+   begin
+      Put (Msg);
+
+      Set_Col (20);
+      Ada.Text_IO.Put ("size =");
+
+      Count_IO.Put
+        (Data_Size,
+         Width => Stream_IO.Count'Image (File_Size)'Length);
+
+      Put_Line (" duration =" & Duration'Image (Curr_Dur));
+   end Print_Statistic;
+
+   -----------
+   -- Stamp --
+   -----------
+
+   procedure Stamp is
+   begin
+      Time_Stamp := Ada.Calendar.Clock;
+   end Stamp;
+
+begin
+   Ada.Text_IO.Put_Line ("ZLib " & ZLib.Version);
+
+   loop
+      Generate_File;
+
+      for Level in ZLib.Compression_Level'Range loop
+
+         Ada.Text_IO.Put_Line ("Level ="
+            & ZLib.Compression_Level'Image (Level));
+
+         --  Test generic interface.
+         Open   (File_In, In_File, In_File_Name);
+         Create (File_Out, Out_File, Z_File_Name);
+
+         Stamp;
+
+         --  Deflate using generic instantiation.
+
+         ZLib.Deflate_Init
+               (Filter   => Filter,
+                Level    => Level,
+                Strategy => Strategy,
+                Header   => Header);
+
+         Translate (Filter);
+         Print_Statistic ("Generic compress", ZLib.Total_Out (Filter));
+         ZLib.Close (Filter);
+
+         Close (File_In);
+         Close (File_Out);
+
+         Open   (File_In, In_File, Z_File_Name);
+         Create (File_Out, Out_File, Out_File_Name);
+
+         Stamp;
+
+         --  Inflate using generic instantiation.
+
+         ZLib.Inflate_Init (Filter, Header => Header);
+
+         Translate (Filter);
+         Print_Statistic ("Generic decompress", ZLib.Total_Out (Filter));
+
+         ZLib.Close (Filter);
+
+         Close (File_In);
+         Close (File_Out);
+
+         Compare_Files (In_File_Name, Out_File_Name);
+
+         --  Test stream interface.
+
+         --  Compress to the back stream.
+
+         Open   (File_In, In_File, In_File_Name);
+         Create (File_Back, Out_File, Z_File_Name);
+
+         Stamp;
+
+         ZLib.Streams.Create
+           (Stream          => File_Z,
+            Mode            => ZLib.Streams.Out_Stream,
+            Back            => ZLib.Streams.Stream_Access
+                                 (Stream (File_Back)),
+            Back_Compressed => True,
+            Level           => Level,
+            Strategy        => Strategy,
+            Header          => Header);
+
+         Copy_Streams
+           (Source => Stream (File_In).all,
+            Target => File_Z);
+
+         --  Flushing internal buffers to the back stream.
+
+         ZLib.Streams.Flush (File_Z, ZLib.Finish);
+
+         Print_Statistic ("Write compress",
+                          ZLib.Streams.Write_Total_Out (File_Z));
+
+         ZLib.Streams.Close (File_Z);
+
+         Close (File_In);
+         Close (File_Back);
+
+         --  Compare reading from original file and from
+         --  decompression stream.
+
+         Open (File_In,   In_File, In_File_Name);
+         Open (File_Back, In_File, Z_File_Name);
+
+         ZLib.Streams.Create
+           (Stream          => File_Z,
+            Mode            => ZLib.Streams.In_Stream,
+            Back            => ZLib.Streams.Stream_Access
+                                 (Stream (File_Back)),
+            Back_Compressed => True,
+            Header          => Header);
+
+         Stamp;
+         Compare_Streams (Stream (File_In).all, File_Z);
+
+         Print_Statistic ("Read decompress",
+                          ZLib.Streams.Read_Total_Out (File_Z));
+
+         ZLib.Streams.Close (File_Z);
+         Close (File_In);
+         Close (File_Back);
+
+         --  Compress by reading from compression stream.
+
+         Open (File_Back, In_File, In_File_Name);
+         Create (File_Out, Out_File, Z_File_Name);
+
+         ZLib.Streams.Create
+           (Stream          => File_Z,
+            Mode            => ZLib.Streams.In_Stream,
+            Back            => ZLib.Streams.Stream_Access
+                                 (Stream (File_Back)),
+            Back_Compressed => False,
+            Level           => Level,
+            Strategy        => Strategy,
+            Header          => Header);
+
+         Stamp;
+         Copy_Streams
+           (Source => File_Z,
+            Target => Stream (File_Out).all);
+
+         Print_Statistic ("Read compress",
+                          ZLib.Streams.Read_Total_Out (File_Z));
+
+         ZLib.Streams.Close (File_Z);
+
+         Close (File_Out);
+         Close (File_Back);
+
+         --  Decompress to decompression stream.
+
+         Open   (File_In,   In_File, Z_File_Name);
+         Create (File_Back, Out_File, Out_File_Name);
+
+         ZLib.Streams.Create
+           (Stream          => File_Z,
+            Mode            => ZLib.Streams.Out_Stream,
+            Back            => ZLib.Streams.Stream_Access
+                                 (Stream (File_Back)),
+            Back_Compressed => False,
+            Header          => Header);
+
+         Stamp;
+
+         Copy_Streams
+           (Source => Stream (File_In).all,
+            Target => File_Z);
+
+         Print_Statistic ("Write decompress",
+                          ZLib.Streams.Write_Total_Out (File_Z));
+
+         ZLib.Streams.Close (File_Z);
+         Close (File_In);
+         Close (File_Back);
+
+         Compare_Files (In_File_Name, Out_File_Name);
+      end loop;
+
+      Ada.Text_IO.Put_Line (Count'Image (File_Size) & " Ok.");
+
+      exit when not Continuous;
+
+      File_Size := File_Size + 1;
+   end loop;
+end Test;

contrib/ada/zlib-streams.adb

@@ -0,0 +1,225 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+
+--  $Id: zlib-streams.adb,v 1.10 2004/05/31 10:53:40 vagul Exp $
+
+with Ada.Unchecked_Deallocation;
+
+package body ZLib.Streams is
+
+   -----------
+   -- Close --
+   -----------
+
+   procedure Close (Stream : in out Stream_Type) is
+      procedure Free is new Ada.Unchecked_Deallocation
+         (Stream_Element_Array, Buffer_Access);
+   begin
+      if Stream.Mode = Out_Stream or Stream.Mode = Duplex then
+         --  We should flush the data written by the writer.
+
+         Flush (Stream, Finish);
+
+         Close (Stream.Writer);
+      end if;
+
+      if Stream.Mode = In_Stream or Stream.Mode = Duplex then
+         Close (Stream.Reader);
+         Free (Stream.Buffer);
+      end if;
+   end Close;
+
+   ------------
+   -- Create --
+   ------------
+
+   procedure Create
+     (Stream            :    out Stream_Type;
+      Mode              : in     Stream_Mode;
+      Back              : in     Stream_Access;
+      Back_Compressed   : in     Boolean;
+      Level             : in     Compression_Level := Default_Compression;
+      Strategy          : in     Strategy_Type     := Default_Strategy;
+      Header            : in     Header_Type       := Default;
+      Read_Buffer_Size  : in     Ada.Streams.Stream_Element_Offset
+                                    := Default_Buffer_Size;
+      Write_Buffer_Size : in     Ada.Streams.Stream_Element_Offset
+                                    := Default_Buffer_Size)
+   is
+
+      subtype Buffer_Subtype is Stream_Element_Array (1 .. Read_Buffer_Size);
+
+      procedure Init_Filter
+         (Filter   : in out Filter_Type;
+          Compress : in     Boolean);
+
+      -----------------
+      -- Init_Filter --
+      -----------------
+
+      procedure Init_Filter
+         (Filter   : in out Filter_Type;
+          Compress : in     Boolean) is
+      begin
+         if Compress then
+            Deflate_Init
+              (Filter, Level, Strategy, Header => Header);
+         else
+            Inflate_Init (Filter, Header => Header);
+         end if;
+      end Init_Filter;
+
+   begin
+      Stream.Back := Back;
+      Stream.Mode := Mode;
+
+      if Mode = Out_Stream or Mode = Duplex then
+         Init_Filter (Stream.Writer, Back_Compressed);
+         Stream.Buffer_Size := Write_Buffer_Size;
+      else
+         Stream.Buffer_Size := 0;
+      end if;
+
+      if Mode = In_Stream or Mode = Duplex then
+         Init_Filter (Stream.Reader, not Back_Compressed);
+
+         Stream.Buffer     := new Buffer_Subtype;
+         Stream.Rest_First := Stream.Buffer'Last + 1;
+         Stream.Rest_Last  := Stream.Buffer'Last;
+      end if;
+   end Create;
+
+   -----------
+   -- Flush --
+   -----------
+
+   procedure Flush
+     (Stream : in out Stream_Type;
+      Mode   : in     Flush_Mode := Sync_Flush)
+   is
+      Buffer : Stream_Element_Array (1 .. Stream.Buffer_Size);
+      Last   : Stream_Element_Offset;
+   begin
+      loop
+         Flush (Stream.Writer, Buffer, Last, Mode);
+
+         Ada.Streams.Write (Stream.Back.all, Buffer (1 .. Last));
+
+         exit when Last < Buffer'Last;
+      end loop;
+   end Flush;
+
+   -------------
+   -- Is_Open --
+   -------------
+
+   function Is_Open (Stream : Stream_Type) return Boolean is
+   begin
+      return Is_Open (Stream.Reader) or else Is_Open (Stream.Writer);
+   end Is_Open;
+
+   ----------
+   -- Read --
+   ----------
+
+   procedure Read
+     (Stream : in out Stream_Type;
+      Item   :    out Stream_Element_Array;
+      Last   :    out Stream_Element_Offset)
+   is
+
+      procedure Read
+        (Item : out Stream_Element_Array;
+         Last : out Stream_Element_Offset);
+
+      ----------
+      -- Read --
+      ----------
+
+      procedure Read
+        (Item : out Stream_Element_Array;
+         Last : out Stream_Element_Offset) is
+      begin
+         Ada.Streams.Read (Stream.Back.all, Item, Last);
+      end Read;
+
+      procedure Read is new ZLib.Read
+         (Read       => Read,
+          Buffer     => Stream.Buffer.all,
+          Rest_First => Stream.Rest_First,
+          Rest_Last  => Stream.Rest_Last);
+
+   begin
+      Read (Stream.Reader, Item, Last);
+   end Read;
+
+   -------------------
+   -- Read_Total_In --
+   -------------------
+
+   function Read_Total_In (Stream : in Stream_Type) return Count is
+   begin
+      return Total_In (Stream.Reader);
+   end Read_Total_In;
+
+   --------------------
+   -- Read_Total_Out --
+   --------------------
+
+   function Read_Total_Out (Stream : in Stream_Type) return Count is
+   begin
+      return Total_Out (Stream.Reader);
+   end Read_Total_Out;
+
+   -----------
+   -- Write --
+   -----------
+
+   procedure Write
+     (Stream : in out Stream_Type;
+      Item   : in     Stream_Element_Array)
+   is
+
+      procedure Write (Item : in Stream_Element_Array);
+
+      -----------
+      -- Write --
+      -----------
+
+      procedure Write (Item : in Stream_Element_Array) is
+      begin
+         Ada.Streams.Write (Stream.Back.all, Item);
+      end Write;
+
+      procedure Write is new ZLib.Write
+         (Write       => Write,
+          Buffer_Size => Stream.Buffer_Size);
+
+   begin
+      Write (Stream.Writer, Item, No_Flush);
+   end Write;
+
+   --------------------
+   -- Write_Total_In --
+   --------------------
+
+   function Write_Total_In (Stream : in Stream_Type) return Count is
+   begin
+      return Total_In (Stream.Writer);
+   end Write_Total_In;
+
+   ---------------------
+   -- Write_Total_Out --
+   ---------------------
+
+   function Write_Total_Out (Stream : in Stream_Type) return Count is
+   begin
+      return Total_Out (Stream.Writer);
+   end Write_Total_Out;
+
+end ZLib.Streams;

contrib/ada/zlib-streams.ads

@@ -0,0 +1,114 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+
+--  $Id: zlib-streams.ads,v 1.12 2004/05/31 10:53:40 vagul Exp $
+
+package ZLib.Streams is
+
+   type Stream_Mode is (In_Stream, Out_Stream, Duplex);
+
+   type Stream_Access is access all Ada.Streams.Root_Stream_Type'Class;
+
+   type Stream_Type is
+      new Ada.Streams.Root_Stream_Type with private;
+
+   procedure Read
+     (Stream : in out Stream_Type;
+      Item   :    out Ada.Streams.Stream_Element_Array;
+      Last   :    out Ada.Streams.Stream_Element_Offset);
+
+   procedure Write
+     (Stream : in out Stream_Type;
+      Item   : in     Ada.Streams.Stream_Element_Array);
+
+   procedure Flush
+     (Stream : in out Stream_Type;
+      Mode   : in     Flush_Mode := Sync_Flush);
+   --  Flush the written data to the back stream,
+   --  all data placed to the compressor is flushing to the Back stream.
+   --  Should not be used untill necessary, becouse it is decreasing
+   --  compression.
+
+   function Read_Total_In (Stream : in Stream_Type) return Count;
+   pragma Inline (Read_Total_In);
+   --  Return total number of bytes read from back stream so far.
+
+   function Read_Total_Out (Stream : in Stream_Type) return Count;
+   pragma Inline (Read_Total_Out);
+   --  Return total number of bytes read so far.
+
+   function Write_Total_In (Stream : in Stream_Type) return Count;
+   pragma Inline (Write_Total_In);
+   --  Return total number of bytes written so far.
+
+   function Write_Total_Out (Stream : in Stream_Type) return Count;
+   pragma Inline (Write_Total_Out);
+   --  Return total number of bytes written to the back stream.
+
+   procedure Create
+     (Stream            :    out Stream_Type;
+      Mode              : in     Stream_Mode;
+      Back              : in     Stream_Access;
+      Back_Compressed   : in     Boolean;
+      Level             : in     Compression_Level := Default_Compression;
+      Strategy          : in     Strategy_Type     := Default_Strategy;
+      Header            : in     Header_Type       := Default;
+      Read_Buffer_Size  : in     Ada.Streams.Stream_Element_Offset
+                                    := Default_Buffer_Size;
+      Write_Buffer_Size : in     Ada.Streams.Stream_Element_Offset
+                                    := Default_Buffer_Size);
+   --  Create the Comression/Decompression stream.
+   --  If mode is In_Stream then Write operation is disabled.
+   --  If mode is Out_Stream then Read operation is disabled.
+
+   --  If Back_Compressed is true then
+   --  Data written to the Stream is compressing to the Back stream
+   --  and data read from the Stream is decompressed data from the Back stream.
+
+   --  If Back_Compressed is false then
+   --  Data written to the Stream is decompressing to the Back stream
+   --  and data read from the Stream is compressed data from the Back stream.
+
+   --  !!! When the Need_Header is False ZLib-Ada is using undocumented
+   --  ZLib 1.1.4 functionality to do not create/wait for ZLib headers.
+
+   function Is_Open (Stream : Stream_Type) return Boolean;
+
+   procedure Close (Stream : in out Stream_Type);
+
+private
+
+   use Ada.Streams;
+
+   type Buffer_Access is access all Stream_Element_Array;
+
+   type Stream_Type
+     is new Root_Stream_Type with
+   record
+      Mode       : Stream_Mode;
+
+      Buffer     : Buffer_Access;
+      Rest_First : Stream_Element_Offset;
+      Rest_Last  : Stream_Element_Offset;
+      --  Buffer for Read operation.
+      --  We need to have this buffer in the record
+      --  becouse not all read data from back stream
+      --  could be processed during the read operation.
+
+      Buffer_Size : Stream_Element_Offset;
+      --  Buffer size for write operation.
+      --  We do not need to have this buffer
+      --  in the record becouse all data could be
+      --  processed in the write operation.
+
+      Back       : Stream_Access;
+      Reader     : Filter_Type;
+      Writer     : Filter_Type;
+   end record;
+
+end ZLib.Streams;

contrib/ada/zlib-thin.adb

@@ -0,0 +1,141 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+
+--  $Id: zlib-thin.adb,v 1.8 2003/12/14 18:27:31 vagul Exp $
+
+package body ZLib.Thin is
+
+   ZLIB_VERSION  : constant Chars_Ptr := zlibVersion;
+
+   Z_Stream_Size : constant Int := Z_Stream'Size / System.Storage_Unit;
+
+   --------------
+   -- Avail_In --
+   --------------
+
+   function Avail_In (Strm : in Z_Stream) return UInt is
+   begin
+      return Strm.Avail_In;
+   end Avail_In;
+
+   ---------------
+   -- Avail_Out --
+   ---------------
+
+   function Avail_Out (Strm : in Z_Stream) return UInt is
+   begin
+      return Strm.Avail_Out;
+   end Avail_Out;
+
+   ------------------
+   -- Deflate_Init --
+   ------------------
+
+   function Deflate_Init
+     (strm       : Z_Streamp;
+      level      : Int;
+      method     : Int;
+      windowBits : Int;
+      memLevel   : Int;
+      strategy   : Int)
+      return       Int is
+   begin
+      return deflateInit2
+               (strm,
+                level,
+                method,
+                windowBits,
+                memLevel,
+                strategy,
+                ZLIB_VERSION,
+                Z_Stream_Size);
+   end Deflate_Init;
+
+   ------------------
+   -- Inflate_Init --
+   ------------------
+
+   function Inflate_Init (strm : Z_Streamp; windowBits : Int) return Int is
+   begin
+      return inflateInit2 (strm, windowBits, ZLIB_VERSION, Z_Stream_Size);
+   end Inflate_Init;
+
+   ------------------------
+   -- Last_Error_Message --
+   ------------------------
+
+   function Last_Error_Message (Strm : in Z_Stream) return String is
+      use Interfaces.C.Strings;
+   begin
+      if Strm.msg = Null_Ptr then
+         return "";
+      else
+         return Value (Strm.msg);
+      end if;
+   end Last_Error_Message;
+
+   ------------
+   -- Set_In --
+   ------------
+
+   procedure Set_In
+     (Strm   : in out Z_Stream;
+      Buffer : in     Voidp;
+      Size   : in     UInt) is
+   begin
+      Strm.Next_In  := Buffer;
+      Strm.Avail_In := Size;
+   end Set_In;
+
+   ------------------
+   -- Set_Mem_Func --
+   ------------------
+
+   procedure Set_Mem_Func
+     (Strm   : in out Z_Stream;
+      Opaque : in     Voidp;
+      Alloc  : in     alloc_func;
+      Free   : in     free_func) is
+   begin
+      Strm.opaque := Opaque;
+      Strm.zalloc := Alloc;
+      Strm.zfree  := Free;
+   end Set_Mem_Func;
+
+   -------------
+   -- Set_Out --
+   -------------
+
+   procedure Set_Out
+     (Strm   : in out Z_Stream;
+      Buffer : in     Voidp;
+      Size   : in     UInt) is
+   begin
+      Strm.Next_Out  := Buffer;
+      Strm.Avail_Out := Size;
+   end Set_Out;
+
+   --------------
+   -- Total_In --
+   --------------
+
+   function Total_In (Strm : in Z_Stream) return ULong is
+   begin
+      return Strm.Total_In;
+   end Total_In;
+
+   ---------------
+   -- Total_Out --
+   ---------------
+
+   function Total_Out (Strm : in Z_Stream) return ULong is
+   begin
+      return Strm.Total_Out;
+   end Total_Out;
+
+end ZLib.Thin;

contrib/ada/zlib-thin.ads

@@ -0,0 +1,450 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2003 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+
+--  $Id: zlib-thin.ads,v 1.11 2004/07/23 06:33:11 vagul Exp $
+
+with Interfaces.C.Strings;
+
+with System;
+
+private package ZLib.Thin is
+
+   --  From zconf.h
+
+   MAX_MEM_LEVEL : constant := 9;         --  zconf.h:105
+                                          --  zconf.h:105
+   MAX_WBITS : constant := 15;      --  zconf.h:115
+                                    --  32K LZ77 window
+                                    --  zconf.h:115
+   SEEK_SET : constant := 8#0000#;  --  zconf.h:244
+                                    --  Seek from beginning of file.
+                                    --  zconf.h:244
+   SEEK_CUR : constant := 1;        --  zconf.h:245
+                                    --  Seek from current position.
+                                    --  zconf.h:245
+   SEEK_END : constant := 2;        --  zconf.h:246
+                                    --  Set file pointer to EOF plus "offset"
+                                    --  zconf.h:246
+
+   type Byte is new Interfaces.C.unsigned_char; --  8 bits
+                                                --  zconf.h:214
+   type UInt is new Interfaces.C.unsigned;      --  16 bits or more
+                                                --  zconf.h:216
+   type Int is new Interfaces.C.int;
+
+   type ULong is new Interfaces.C.unsigned_long;     --  32 bits or more
+                                                     --  zconf.h:217
+   subtype Chars_Ptr is Interfaces.C.Strings.chars_ptr;
+
+   type ULong_Access is access ULong;
+   type Int_Access is access Int;
+
+   subtype Voidp is System.Address;            --  zconf.h:232
+
+   subtype Byte_Access is Voidp;
+
+   Nul : constant Voidp := System.Null_Address;
+   --  end from zconf
+
+   Z_NO_FLUSH : constant := 8#0000#;   --  zlib.h:125
+                                       --  zlib.h:125
+   Z_PARTIAL_FLUSH : constant := 1;       --  zlib.h:126
+                                          --  will be removed, use
+                                          --  Z_SYNC_FLUSH instead
+                                          --  zlib.h:126
+   Z_SYNC_FLUSH : constant := 2;       --  zlib.h:127
+                                       --  zlib.h:127
+   Z_FULL_FLUSH : constant := 3;       --  zlib.h:128
+                                       --  zlib.h:128
+   Z_FINISH : constant := 4;        --  zlib.h:129
+                                    --  zlib.h:129
+   Z_OK : constant := 8#0000#;   --  zlib.h:132
+                                 --  zlib.h:132
+   Z_STREAM_END : constant := 1;       --  zlib.h:133
+                                       --  zlib.h:133
+   Z_NEED_DICT : constant := 2;        --  zlib.h:134
+                                       --  zlib.h:134
+   Z_ERRNO : constant := -1;        --  zlib.h:135
+                                    --  zlib.h:135
+   Z_STREAM_ERROR : constant := -2;       --  zlib.h:136
+                                          --  zlib.h:136
+   Z_DATA_ERROR : constant := -3;      --  zlib.h:137
+                                       --  zlib.h:137
+   Z_MEM_ERROR : constant := -4;       --  zlib.h:138
+                                       --  zlib.h:138
+   Z_BUF_ERROR : constant := -5;       --  zlib.h:139
+                                       --  zlib.h:139
+   Z_VERSION_ERROR : constant := -6;      --  zlib.h:140
+                                          --  zlib.h:140
+   Z_NO_COMPRESSION : constant := 8#0000#;   --  zlib.h:145
+                                             --  zlib.h:145
+   Z_BEST_SPEED : constant := 1;       --  zlib.h:146
+                                       --  zlib.h:146
+   Z_BEST_COMPRESSION : constant := 9;       --  zlib.h:147
+                                             --  zlib.h:147
+   Z_DEFAULT_COMPRESSION : constant := -1;      --  zlib.h:148
+                                                --  zlib.h:148
+   Z_FILTERED : constant := 1;      --  zlib.h:151
+                                    --  zlib.h:151
+   Z_HUFFMAN_ONLY : constant := 2;        --  zlib.h:152
+                                          --  zlib.h:152
+   Z_DEFAULT_STRATEGY : constant := 8#0000#; --  zlib.h:153
+                                             --  zlib.h:153
+   Z_BINARY : constant := 8#0000#;  --  zlib.h:156
+                                    --  zlib.h:156
+   Z_ASCII : constant := 1;      --  zlib.h:157
+                                 --  zlib.h:157
+   Z_UNKNOWN : constant := 2;       --  zlib.h:158
+                                    --  zlib.h:158
+   Z_DEFLATED : constant := 8;      --  zlib.h:161
+                                    --  zlib.h:161
+   Z_NULL : constant := 8#0000#; --  zlib.h:164
+                                 --  for initializing zalloc, zfree, opaque
+                                 --  zlib.h:164
+   type gzFile is new Voidp;                  --  zlib.h:646
+
+   type Z_Stream is private;
+
+   type Z_Streamp is access all Z_Stream;     --  zlib.h:89
+
+   type alloc_func is access function
+     (Opaque : Voidp;
+      Items  : UInt;
+      Size   : UInt)
+      return Voidp; --  zlib.h:63
+
+   type free_func is access procedure (opaque : Voidp; address : Voidp);
+
+   function zlibVersion return Chars_Ptr;
+
+   function Deflate (strm : Z_Streamp; flush : Int) return Int;
+
+   function DeflateEnd (strm : Z_Streamp) return Int;
+
+   function Inflate (strm : Z_Streamp; flush : Int) return Int;
+
+   function InflateEnd (strm : Z_Streamp) return Int;
+
+   function deflateSetDictionary
+     (strm       : Z_Streamp;
+      dictionary : Byte_Access;
+      dictLength : UInt)
+      return       Int;
+
+   function deflateCopy (dest : Z_Streamp; source : Z_Streamp) return Int;
+   --  zlib.h:478
+
+   function deflateReset (strm : Z_Streamp) return Int; -- zlib.h:495
+
+   function deflateParams
+     (strm     : Z_Streamp;
+      level    : Int;
+      strategy : Int)
+      return     Int;       -- zlib.h:506
+
+   function inflateSetDictionary
+     (strm       : Z_Streamp;
+      dictionary : Byte_Access;
+      dictLength : UInt)
+      return       Int; --  zlib.h:548
+
+   function inflateSync (strm : Z_Streamp) return Int;  --  zlib.h:565
+
+   function inflateReset (strm : Z_Streamp) return Int; --  zlib.h:580
+
+   function compress
+     (dest      : Byte_Access;
+      destLen   : ULong_Access;
+      source    : Byte_Access;
+      sourceLen : ULong)
+      return      Int;           -- zlib.h:601
+
+   function compress2
+     (dest      : Byte_Access;
+      destLen   : ULong_Access;
+      source    : Byte_Access;
+      sourceLen : ULong;
+      level     : Int)
+      return      Int;          -- zlib.h:615
+
+   function uncompress
+     (dest      : Byte_Access;
+      destLen   : ULong_Access;
+      source    : Byte_Access;
+      sourceLen : ULong)
+      return      Int;
+
+   function gzopen (path : Chars_Ptr; mode : Chars_Ptr) return gzFile;
+
+   function gzdopen (fd : Int; mode : Chars_Ptr) return gzFile;
+
+   function gzsetparams
+     (file     : gzFile;
+      level    : Int;
+      strategy : Int)
+      return     Int;
+
+   function gzread
+     (file : gzFile;
+      buf  : Voidp;
+      len  : UInt)
+      return Int;
+
+   function gzwrite
+     (file : in gzFile;
+      buf  : in Voidp;
+      len  : in UInt)
+      return Int;
+
+   function gzprintf (file : in gzFile; format : in Chars_Ptr) return Int;
+
+   function gzputs (file : in gzFile; s : in Chars_Ptr) return Int;
+
+   function gzgets
+     (file : gzFile;
+      buf  : Chars_Ptr;
+      len  : Int)
+      return Chars_Ptr;
+
+   function gzputc (file : gzFile; char : Int) return Int;
+
+   function gzgetc (file : gzFile) return Int;
+
+   function gzflush (file : gzFile; flush : Int) return Int;
+
+   function gzseek
+     (file   : gzFile;
+      offset : Int;
+      whence : Int)
+      return   Int;
+
+   function gzrewind (file : gzFile) return Int;
+
+   function gztell (file : gzFile) return Int;
+
+   function gzeof (file : gzFile) return Int;
+
+   function gzclose (file : gzFile) return Int;
+
+   function gzerror (file : gzFile; errnum : Int_Access) return Chars_Ptr;
+
+   function adler32
+     (adler : ULong;
+      buf   : Byte_Access;
+      len   : UInt)
+      return  ULong;
+
+   function crc32
+     (crc  : ULong;
+      buf  : Byte_Access;
+      len  : UInt)
+      return ULong;
+
+   function deflateInit
+     (strm        : Z_Streamp;
+      level       : Int;
+      version     : Chars_Ptr;
+      stream_size : Int)
+      return        Int;
+
+   function deflateInit2
+     (strm        : Z_Streamp;
+      level       : Int;
+      method      : Int;
+      windowBits  : Int;
+      memLevel    : Int;
+      strategy    : Int;
+      version     : Chars_Ptr;
+      stream_size : Int)
+      return        Int;
+
+   function Deflate_Init
+     (strm       : Z_Streamp;
+      level      : Int;
+      method     : Int;
+      windowBits : Int;
+      memLevel   : Int;
+      strategy   : Int)
+      return       Int;
+   pragma Inline (Deflate_Init);
+
+   function inflateInit
+     (strm        : Z_Streamp;
+      version     : Chars_Ptr;
+      stream_size : Int)
+      return        Int;
+
+   function inflateInit2
+     (strm        : in Z_Streamp;
+      windowBits  : in Int;
+      version     : in Chars_Ptr;
+      stream_size : in Int)
+      return      Int;
+
+   function inflateBackInit
+     (strm        : in Z_Streamp;
+      windowBits  : in Int;
+      window      : in Byte_Access;
+      version     : in Chars_Ptr;
+      stream_size : in Int)
+      return      Int;
+   --  Size of window have to be 2**windowBits.
+
+   function Inflate_Init (strm : Z_Streamp; windowBits : Int) return Int;
+   pragma Inline (Inflate_Init);
+
+   function zError (err : Int) return Chars_Ptr;
+
+   function inflateSyncPoint (z : Z_Streamp) return Int;
+
+   function get_crc_table return ULong_Access;
+
+   --  Interface to the available fields of the z_stream structure.
+   --  The application must update next_in and avail_in when avail_in has
+   --  dropped to zero. It must update next_out and avail_out when avail_out
+   --  has dropped to zero. The application must initialize zalloc, zfree and
+   --  opaque before calling the init function.
+
+   procedure Set_In
+     (Strm   : in out Z_Stream;
+      Buffer : in Voidp;
+      Size   : in UInt);
+   pragma Inline (Set_In);
+
+   procedure Set_Out
+     (Strm   : in out Z_Stream;
+      Buffer : in Voidp;
+      Size   : in UInt);
+   pragma Inline (Set_Out);
+
+   procedure Set_Mem_Func
+     (Strm   : in out Z_Stream;
+      Opaque : in Voidp;
+      Alloc  : in alloc_func;
+      Free   : in free_func);
+   pragma Inline (Set_Mem_Func);
+
+   function Last_Error_Message (Strm : in Z_Stream) return String;
+   pragma Inline (Last_Error_Message);
+
+   function Avail_Out (Strm : in Z_Stream) return UInt;
+   pragma Inline (Avail_Out);
+
+   function Avail_In (Strm : in Z_Stream) return UInt;
+   pragma Inline (Avail_In);
+
+   function Total_In (Strm : in Z_Stream) return ULong;
+   pragma Inline (Total_In);
+
+   function Total_Out (Strm : in Z_Stream) return ULong;
+   pragma Inline (Total_Out);
+
+   function inflateCopy
+     (dest   : in Z_Streamp;
+      Source : in Z_Streamp)
+      return Int;
+
+   function compressBound (Source_Len : in ULong) return ULong;
+
+   function deflateBound
+     (Strm       : in Z_Streamp;
+      Source_Len : in ULong)
+      return     ULong;
+
+   function gzungetc (C : in Int; File : in  gzFile) return Int;
+
+   function zlibCompileFlags return ULong;
+
+private
+
+   type Z_Stream is record            -- zlib.h:68
+      Next_In   : Voidp      := Nul;  -- next input byte
+      Avail_In  : UInt       := 0;    -- number of bytes available at next_in
+      Total_In  : ULong      := 0;    -- total nb of input bytes read so far
+      Next_Out  : Voidp      := Nul;  -- next output byte should be put there
+      Avail_Out : UInt       := 0;    -- remaining free space at next_out
+      Total_Out : ULong      := 0;    -- total nb of bytes output so far
+      msg       : Chars_Ptr;          -- last error message, NULL if no error
+      state     : Voidp;              -- not visible by applications
+      zalloc    : alloc_func := null; -- used to allocate the internal state
+      zfree     : free_func  := null; -- used to free the internal state
+      opaque    : Voidp;              -- private data object passed to
+                                      --  zalloc and zfree
+      data_type : Int;                -- best guess about the data type:
+                                      --  ascii or binary
+      adler     : ULong;              -- adler32 value of the uncompressed
+                                      --  data
+      reserved  : ULong;              -- reserved for future use
+   end record;
+
+   pragma Convention (C, Z_Stream);
+
+   pragma Import (C, zlibVersion, "zlibVersion");
+   pragma Import (C, Deflate, "deflate");
+   pragma Import (C, DeflateEnd, "deflateEnd");
+   pragma Import (C, Inflate, "inflate");
+   pragma Import (C, InflateEnd, "inflateEnd");
+   pragma Import (C, deflateSetDictionary, "deflateSetDictionary");
+   pragma Import (C, deflateCopy, "deflateCopy");
+   pragma Import (C, deflateReset, "deflateReset");
+   pragma Import (C, deflateParams, "deflateParams");
+   pragma Import (C, inflateSetDictionary, "inflateSetDictionary");
+   pragma Import (C, inflateSync, "inflateSync");
+   pragma Import (C, inflateReset, "inflateReset");
+   pragma Import (C, compress, "compress");
+   pragma Import (C, compress2, "compress2");
+   pragma Import (C, uncompress, "uncompress");
+   pragma Import (C, gzopen, "gzopen");
+   pragma Import (C, gzdopen, "gzdopen");
+   pragma Import (C, gzsetparams, "gzsetparams");
+   pragma Import (C, gzread, "gzread");
+   pragma Import (C, gzwrite, "gzwrite");
+   pragma Import (C, gzprintf, "gzprintf");
+   pragma Import (C, gzputs, "gzputs");
+   pragma Import (C, gzgets, "gzgets");
+   pragma Import (C, gzputc, "gzputc");
+   pragma Import (C, gzgetc, "gzgetc");
+   pragma Import (C, gzflush, "gzflush");
+   pragma Import (C, gzseek, "gzseek");
+   pragma Import (C, gzrewind, "gzrewind");
+   pragma Import (C, gztell, "gztell");
+   pragma Import (C, gzeof, "gzeof");
+   pragma Import (C, gzclose, "gzclose");
+   pragma Import (C, gzerror, "gzerror");
+   pragma Import (C, adler32, "adler32");
+   pragma Import (C, crc32, "crc32");
+   pragma Import (C, deflateInit, "deflateInit_");
+   pragma Import (C, inflateInit, "inflateInit_");
+   pragma Import (C, deflateInit2, "deflateInit2_");
+   pragma Import (C, inflateInit2, "inflateInit2_");
+   pragma Import (C, zError, "zError");
+   pragma Import (C, inflateSyncPoint, "inflateSyncPoint");
+   pragma Import (C, get_crc_table, "get_crc_table");
+
+   --  since zlib 1.2.0:
+
+   pragma Import (C, inflateCopy, "inflateCopy");
+   pragma Import (C, compressBound, "compressBound");
+   pragma Import (C, deflateBound, "deflateBound");
+   pragma Import (C, gzungetc, "gzungetc");
+   pragma Import (C, zlibCompileFlags, "zlibCompileFlags");
+
+   pragma Import (C, inflateBackInit, "inflateBackInit_");
+
+   --  I stopped binding the inflateBack routines, becouse realize that
+   --  it does not support zlib and gzip headers for now, and have no
+   --  symmetric deflateBack routines.
+   --  ZLib-Ada is symmetric regarding deflate/inflate data transformation
+   --  and has a similar generic callback interface for the
+   --  deflate/inflate transformation based on the regular Deflate/Inflate
+   --  routines.
+
+   --  pragma Import (C, inflateBack, "inflateBack");
+   --  pragma Import (C, inflateBackEnd, "inflateBackEnd");
+
+end ZLib.Thin;

contrib/ada/zlib.adb

@@ -0,0 +1,701 @@
+----------------------------------------------------------------
+--  ZLib for Ada thick binding.                               --
+--                                                            --
+--  Copyright (C) 2002-2004 Dmitriy Anisimkov                 --
+--                                                            --
+--  Open source license information is in the zlib.ads file.  --
+----------------------------------------------------------------
+
+--  $Id: zlib.adb,v 1.31 2004/09/06 06:53:19 vagul Exp $
+
+with Ada.Exceptions;
+with Ada.Unchecked_Conversion;
+with Ada.Unchecked_Deallocation;
+
+with Interfaces.C.Strings;
+
+with ZLib.Thin;
+
+package body ZLib is
+
+   use type Thin.Int;
+
+   type Z_Stream is new Thin.Z_Stream;
+
+   type Return_Code_Enum is
+      (OK,
+       STREAM_END,
+       NEED_DICT,
+       ERRNO,
+       STREAM_ERROR,
+       DATA_ERROR,
+       MEM_ERROR,
+       BUF_ERROR,
+       VERSION_ERROR);
+
+   type Flate_Step_Function is access
+     function (Strm : in Thin.Z_Streamp; Flush : in Thin.Int) return Thin.Int;
+   pragma Convention (C, Flate_Step_Function);
+
+   type Flate_End_Function is access
+      function (Ctrm : in Thin.Z_Streamp) return Thin.Int;
+   pragma Convention (C, Flate_End_Function);
+
+   type Flate_Type is record
+      Step : Flate_Step_Function;
+      Done : Flate_End_Function;
+   end record;
+
+   subtype Footer_Array is Stream_Element_Array (1 .. 8);
+
+   Simple_GZip_Header : constant Stream_Element_Array (1 .. 10)
+     := (16#1f#, 16#8b#,                 --  Magic header
+         16#08#,                         --  Z_DEFLATED
+         16#00#,                         --  Flags
+         16#00#, 16#00#, 16#00#, 16#00#, --  Time
+         16#00#,                         --  XFlags
+         16#03#                          --  OS code
+        );
+   --  The simplest gzip header is not for informational, but just for
+   --  gzip format compatibility.
+   --  Note that some code below is using assumption
+   --  Simple_GZip_Header'Last > Footer_Array'Last, so do not make
+   --  Simple_GZip_Header'Last <= Footer_Array'Last.
+
+   Return_Code : constant array (Thin.Int range <>) of Return_Code_Enum
+     := (0 => OK,
+         1 => STREAM_END,
+         2 => NEED_DICT,
+        -1 => ERRNO,
+        -2 => STREAM_ERROR,
+        -3 => DATA_ERROR,
+        -4 => MEM_ERROR,
+        -5 => BUF_ERROR,
+        -6 => VERSION_ERROR);
+
+   Flate : constant array (Boolean) of Flate_Type
+     := (True  => (Step => Thin.Deflate'Access,
+                   Done => Thin.DeflateEnd'Access),
+         False => (Step => Thin.Inflate'Access,
+                   Done => Thin.InflateEnd'Access));
+
+   Flush_Finish : constant array (Boolean) of Flush_Mode
+     := (True => Finish, False => No_Flush);
+
+   procedure Raise_Error (Stream : in Z_Stream);
+   pragma Inline (Raise_Error);
+
+   procedure Raise_Error (Message : in String);
+   pragma Inline (Raise_Error);
+
+   procedure Check_Error (Stream : in Z_Stream; Code : in Thin.Int);
+
+   procedure Free is new Ada.Unchecked_Deallocation
+      (Z_Stream, Z_Stream_Access);
+
+   function To_Thin_Access is new Ada.Unchecked_Conversion
+     (Z_Stream_Access, Thin.Z_Streamp);
+
+   procedure Translate_GZip
+     (Filter    : in out Filter_Type;
+      In_Data   : in     Ada.Streams.Stream_Element_Array;
+      In_Last   :    out Ada.Streams.Stream_Element_Offset;
+      Out_Data  :    out Ada.Streams.Stream_Element_Array;
+      Out_Last  :    out Ada.Streams.Stream_Element_Offset;
+      Flush     : in     Flush_Mode);
+   --  Separate translate routine for make gzip header.
+
+   procedure Translate_Auto
+     (Filter    : in out Filter_Type;
+      In_Data   : in     Ada.Streams.Stream_Element_Array;
+      In_Last   :    out Ada.Streams.Stream_Element_Offset;
+      Out_Data  :    out Ada.Streams.Stream_Element_Array;
+      Out_Last  :    out Ada.Streams.Stream_Element_Offset;
+      Flush     : in     Flush_Mode);
+   --  translate routine without additional headers.
+
+   -----------------
+   -- Check_Error --
+   -----------------
+
+   procedure Check_Error (Stream : in Z_Stream; Code : in Thin.Int) is
+      use type Thin.Int;
+   begin
+      if Code /= Thin.Z_OK then
+         Raise_Error
+            (Return_Code_Enum'Image (Return_Code (Code))
+              & ": " & Last_Error_Message (Stream));
+      end if;
+   end Check_Error;
+
+   -----------
+   -- Close --
+   -----------
+
+   procedure Close
+     (Filter       : in out Filter_Type;
+      Ignore_Error : in     Boolean := False)
+   is
+      Code : Thin.Int;
+   begin
+      if not Ignore_Error and then not Is_Open (Filter) then
+         raise Status_Error;
+      end if;
+
+      Code := Flate (Filter.Compression).Done (To_Thin_Access (Filter.Strm));
+
+      if Ignore_Error or else Code = Thin.Z_OK then
+         Free (Filter.Strm);
+      else
+         declare
+            Error_Message : constant String
+              := Last_Error_Message (Filter.Strm.all);
+         begin
+            Free (Filter.Strm);
+            Ada.Exceptions.Raise_Exception
+               (ZLib_Error'Identity,
+                Return_Code_Enum'Image (Return_Code (Code))
+                  & ": " & Error_Message);
+         end;
+      end if;
+   end Close;
+
+   -----------
+   -- CRC32 --
+   -----------
+
+   function CRC32
+     (CRC  : in Unsigned_32;
+      Data : in Ada.Streams.Stream_Element_Array)
+      return Unsigned_32
+   is
+      use Thin;
+   begin
+      return Unsigned_32 (crc32 (ULong (CRC),
+                                 Data'Address,
+                                 Data'Length));
+   end CRC32;
+
+   procedure CRC32
+     (CRC  : in out Unsigned_32;
+      Data : in     Ada.Streams.Stream_Element_Array) is
+   begin
+      CRC := CRC32 (CRC, Data);
+   end CRC32;
+
+   ------------------
+   -- Deflate_Init --
+   ------------------
+
+   procedure Deflate_Init
+     (Filter       : in out Filter_Type;
+      Level        : in     Compression_Level  := Default_Compression;
+      Strategy     : in     Strategy_Type      := Default_Strategy;
+      Method       : in     Compression_Method := Deflated;
+      Window_Bits  : in     Window_Bits_Type   := Default_Window_Bits;
+      Memory_Level : in     Memory_Level_Type  := Default_Memory_Level;
+      Header       : in     Header_Type        := Default)
+   is
+      use type Thin.Int;
+      Win_Bits : Thin.Int := Thin.Int (Window_Bits);
+   begin
+      if Is_Open (Filter) then
+         raise Status_Error;
+      end if;
+
+      --  We allow ZLib to make header only in case of default header type.
+      --  Otherwise we would either do header by ourselfs, or do not do
+      --  header at all.
+
+      if Header = None or else Header = GZip then
+         Win_Bits := -Win_Bits;
+      end if;
+
+      --  For the GZip CRC calculation and make headers.
+
+      if Header = GZip then
+         Filter.CRC    := 0;
+         Filter.Offset := Simple_GZip_Header'First;
+      else
+         Filter.Offset := Simple_GZip_Header'Last + 1;
+      end if;
+
+      Filter.Strm        := new Z_Stream;
+      Filter.Compression := True;
+      Filter.Stream_End  := False;
+      Filter.Header      := Header;
+
+      if Thin.Deflate_Init
+           (To_Thin_Access (Filter.Strm),
+            Level      => Thin.Int (Level),
+            method     => Thin.Int (Method),
+            windowBits => Win_Bits,
+            memLevel   => Thin.Int (Memory_Level),
+            strategy   => Thin.Int (Strategy)) /= Thin.Z_OK
+      then
+         Raise_Error (Filter.Strm.all);
+      end if;
+   end Deflate_Init;
+
+   -----------
+   -- Flush --
+   -----------
+
+   procedure Flush
+     (Filter    : in out Filter_Type;
+      Out_Data  :    out Ada.Streams.Stream_Element_Array;
+      Out_Last  :    out Ada.Streams.Stream_Element_Offset;
+      Flush     : in     Flush_Mode)
+   is
+      No_Data : Stream_Element_Array := (1 .. 0 => 0);
+      Last    : Stream_Element_Offset;
+   begin
+      Translate (Filter, No_Data, Last, Out_Data, Out_Last, Flush);
+   end Flush;
+
+   -----------------------
+   -- Generic_Translate --
+   -----------------------
+
+   procedure Generic_Translate
+     (Filter          : in out ZLib.Filter_Type;
+      In_Buffer_Size  : in     Integer := Default_Buffer_Size;
+      Out_Buffer_Size : in     Integer := Default_Buffer_Size)
+   is
+      In_Buffer  : Stream_Element_Array
+                     (1 .. Stream_Element_Offset (In_Buffer_Size));
+      Out_Buffer : Stream_Element_Array
+                     (1 .. Stream_Element_Offset (Out_Buffer_Size));
+      Last       : Stream_Element_Offset;
+      In_Last    : Stream_Element_Offset;
+      In_First   : Stream_Element_Offset;
+      Out_Last   : Stream_Element_Offset;
+   begin
+      Main : loop
+         Data_In (In_Buffer, Last);
+
+         In_First := In_Buffer'First;
+
+         loop
+            Translate
+              (Filter   => Filter,
+               In_Data  => In_Buffer (In_First .. Last),
+               In_Last  => In_Last,
+               Out_Data => Out_Buffer,
+               Out_Last => Out_Last,
+               Flush    => Flush_Finish (Last < In_Buffer'First));
+
+            if Out_Buffer'First <= Out_Last then
+               Data_Out (Out_Buffer (Out_Buffer'First .. Out_Last));
+            end if;
+
+            exit Main when Stream_End (Filter);
+
+            --  The end of in buffer.
+
+            exit when In_Last = Last;
+
+            In_First := In_Last + 1;
+         end loop;
+      end loop Main;
+
+   end Generic_Translate;
+
+   ------------------
+   -- Inflate_Init --
+   ------------------
+
+   procedure Inflate_Init
+     (Filter      : in out Filter_Type;
+      Window_Bits : in     Window_Bits_Type := Default_Window_Bits;
+      Header      : in     Header_Type      := Default)
+   is
+      use type Thin.Int;
+      Win_Bits : Thin.Int := Thin.Int (Window_Bits);
+
+      procedure Check_Version;
+      --  Check the latest header types compatibility.
+
+      procedure Check_Version is
+      begin
+         if Version <= "1.1.4" then
+            Raise_Error
+              ("Inflate header type " & Header_Type'Image (Header)
+               & " incompatible with ZLib version " & Version);
+         end if;
+      end Check_Version;
+
+   begin
+      if Is_Open (Filter) then
+         raise Status_Error;
+      end if;
+
+      case Header is
+         when None =>
+            Check_Version;
+
+            --  Inflate data without headers determined
+            --  by negative Win_Bits.
+
+            Win_Bits := -Win_Bits;
+         when GZip =>
+            Check_Version;
+
+            --  Inflate gzip data defined by flag 16.
+
+            Win_Bits := Win_Bits + 16;
+         when Auto =>
+            Check_Version;
+
+            --  Inflate with automatic detection
+            --  of gzip or native header defined by flag 32.
+
+            Win_Bits := Win_Bits + 32;
+         when Default => null;
+      end case;
+
+      Filter.Strm        := new Z_Stream;
+      Filter.Compression := False;
+      Filter.Stream_End  := False;
+      Filter.Header      := Header;
+
+      if Thin.Inflate_Init
+         (To_Thin_Access (Filter.Strm), Win_Bits) /= Thin.Z_OK
+      then
+         Raise_Error (Filter.Strm.all);
+      end if;
+   end Inflate_Init;
+
+   -------------
+   -- Is_Open --
+   -------------
+
+   function Is_Open (Filter : in Filter_Type) return Boolean is
+   begin
+      return Filter.Strm /= null;
+   end Is_Open;
+
+   -----------------
+   -- Raise_Error --
+   -----------------
+
+   procedure Raise_Error (Message : in String) is
+   begin
+      Ada.Exceptions.Raise_Exception (ZLib_Error'Identity, Message);
+   end Raise_Error;
+
+   procedure Raise_Error (Stream : in Z_Stream) is
+   begin
+      Raise_Error (Last_Error_Message (Stream));
+   end Raise_Error;
+
+   ----------
+   -- Read --
+   ----------
+
+   procedure Read
+     (Filter : in out Filter_Type;
+      Item   :    out Ada.Streams.Stream_Element_Array;
+      Last   :    out Ada.Streams.Stream_Element_Offset;
+      Flush  : in     Flush_Mode := No_Flush)
+   is
+      In_Last    : Stream_Element_Offset;
+      Item_First : Ada.Streams.Stream_Element_Offset := Item'First;
+      V_Flush    : Flush_Mode := Flush;
+
+   begin
+      pragma Assert (Rest_First in Buffer'First .. Buffer'Last + 1);
+      pragma Assert (Rest_Last in Buffer'First - 1 .. Buffer'Last);
+
+      loop
+         if Rest_Last = Buffer'First - 1 then
+            V_Flush := Finish;
+
+         elsif Rest_First > Rest_Last then
+            Read (Buffer, Rest_Last);
+            Rest_First := Buffer'First;
+
+            if Rest_Last < Buffer'First then
+               V_Flush := Finish;
+            end if;
+         end if;
+
+         Translate
+           (Filter   => Filter,
+            In_Data  => Buffer (Rest_First .. Rest_Last),
+            In_Last  => In_Last,
+            Out_Data => Item (Item_First .. Item'Last),
+            Out_Last => Last,
+            Flush    => V_Flush);
+
+         Rest_First := In_Last + 1;
+
+         exit when Stream_End (Filter)
+           or else Last = Item'Last
+           or else (Last >= Item'First and then Allow_Read_Some);
+
+         Item_First := Last + 1;
+      end loop;
+   end Read;
+
+   ----------------
+   -- Stream_End --
+   ----------------
+
+   function Stream_End (Filter : in Filter_Type) return Boolean is
+   begin
+      if Filter.Header = GZip and Filter.Compression then
+         return Filter.Stream_End
+            and then Filter.Offset = Footer_Array'Last + 1;
+      else
+         return Filter.Stream_End;
+      end if;
+   end Stream_End;
+
+   --------------
+   -- Total_In --
+   --------------
+
+   function Total_In (Filter : in Filter_Type) return Count is
+   begin
+      return Count (Thin.Total_In (To_Thin_Access (Filter.Strm).all));
+   end Total_In;
+
+   ---------------
+   -- Total_Out --
+   ---------------
+
+   function Total_Out (Filter : in Filter_Type) return Count is
+   begin
+      return Count (Thin.Total_Out (To_Thin_Access (Filter.Strm).all));
+   end Total_Out;
+
+   ---------------
+   -- Translate --
+   ---------------
+
+   procedure Translate
+     (Filter    : in out Filter_Type;
+      In_Data   : in     Ada.Streams.Stream_Element_Array;
+      In_Last   :    out Ada.Streams.Stream_Element_Offset;
+      Out_Data  :    out Ada.Streams.Stream_Element_Array;
+      Out_Last  :    out Ada.Streams.Stream_Element_Offset;
+      Flush     : in     Flush_Mode) is
+   begin
+      if Filter.Header = GZip and then Filter.Compression then
+         Translate_GZip
+           (Filter   => Filter,
+            In_Data  => In_Data,
+            In_Last  => In_Last,
+            Out_Data => Out_Data,
+            Out_Last => Out_Last,
+            Flush    => Flush);
+      else
+         Translate_Auto
+           (Filter   => Filter,
+            In_Data  => In_Data,
+            In_Last  => In_Last,
+            Out_Data => Out_Data,
+            Out_Last => Out_Last,
+            Flush    => Flush);
+      end if;
+   end Translate;
+
+   --------------------
+   -- Translate_Auto --
+   --------------------
+
+   procedure Translate_Auto
+     (Filter    : in out Filter_Type;
+      In_Data   : in     Ada.Streams.Stream_Element_Array;
+      In_Last   :    out Ada.Streams.Stream_Element_Offset;
+      Out_Data  :    out Ada.Streams.Stream_Element_Array;
+      Out_Last  :    out Ada.Streams.Stream_Element_Offset;
+      Flush     : in     Flush_Mode)
+   is
+      use type Thin.Int;
+      Code : Thin.Int;
+
+   begin
+      if not Is_Open (Filter) then
+         raise Status_Error;
+      end if;
+
+      if Out_Data'Length = 0 and then In_Data'Length = 0 then
+         raise Constraint_Error;
+      end if;
+
+      Set_Out (Filter.Strm.all, Out_Data'Address, Out_Data'Length);
+      Set_In  (Filter.Strm.all, In_Data'Address, In_Data'Length);
+
+      Code := Flate (Filter.Compression).Step
+        (To_Thin_Access (Filter.Strm),
+         Thin.Int (Flush));
+
+      if Code = Thin.Z_STREAM_END then
+         Filter.Stream_End := True;
+      else
+         Check_Error (Filter.Strm.all, Code);
+      end if;
+
+      In_Last  := In_Data'Last
+         - Stream_Element_Offset (Avail_In (Filter.Strm.all));
+      Out_Last := Out_Data'Last
+         - Stream_Element_Offset (Avail_Out (Filter.Strm.all));
+   end Translate_Auto;
+
+   --------------------
+   -- Translate_GZip --
+   --------------------
+
+   procedure Translate_GZip
+     (Filter    : in out Filter_Type;
+      In_Data   : in     Ada.Streams.Stream_Element_Array;
+      In_Last   :    out Ada.Streams.Stream_Element_Offset;
+      Out_Data  :    out Ada.Streams.Stream_Element_Array;
+      Out_Last  :    out Ada.Streams.Stream_Element_Offset;
+      Flush     : in     Flush_Mode)
+   is
+      Out_First : Stream_Element_Offset;
+
+      procedure Add_Data (Data : in Stream_Element_Array);
+      --  Add data to stream from the Filter.Offset till necessary,
+      --  used for add gzip headr/footer.
+
+      procedure Put_32
+        (Item : in out Stream_Element_Array;
+         Data : in     Unsigned_32);
+      pragma Inline (Put_32);
+
+      --------------
+      -- Add_Data --
+      --------------
+
+      procedure Add_Data (Data : in Stream_Element_Array) is
+         Data_First : Stream_Element_Offset renames Filter.Offset;
+         Data_Last  : Stream_Element_Offset;
+         Data_Len   : Stream_Element_Offset; --  -1
+         Out_Len    : Stream_Element_Offset; --  -1
+      begin
+         Out_First := Out_Last + 1;
+
+         if Data_First > Data'Last then
+            return;
+         end if;
+
+         Data_Len  := Data'Last     - Data_First;
+         Out_Len   := Out_Data'Last - Out_First;
+
+         if Data_Len <= Out_Len then
+            Out_Last  := Out_First  + Data_Len;
+            Data_Last := Data'Last;
+         else
+            Out_Last  := Out_Data'Last;
+            Data_Last := Data_First + Out_Len;
+         end if;
+
+         Out_Data (Out_First .. Out_Last) := Data (Data_First .. Data_Last);
+
+         Data_First := Data_Last + 1;
+         Out_First  := Out_Last + 1;
+      end Add_Data;
+
+      ------------
+      -- Put_32 --
+      ------------
+
+      procedure Put_32
+        (Item : in out Stream_Element_Array;
+         Data : in     Unsigned_32)
+      is
+         D : Unsigned_32 := Data;
+      begin
+         for J in Item'First .. Item'First + 3 loop
+            Item (J) := Stream_Element (D and 16#FF#);
+            D := Shift_Right (D, 8);
+         end loop;
+      end Put_32;
+
+   begin
+      Out_Last := Out_Data'First - 1;
+
+      if not Filter.Stream_End then
+         Add_Data (Simple_GZip_Header);
+
+         Translate_Auto
+           (Filter   => Filter,
+            In_Data  => In_Data,
+            In_Last  => In_Last,
+            Out_Data => Out_Data (Out_First .. Out_Data'Last),
+            Out_Last => Out_Last,
+            Flush    => Flush);
+
+         CRC32 (Filter.CRC, In_Data (In_Data'First .. In_Last));
+      end if;
+
+      if Filter.Stream_End and then Out_Last <= Out_Data'Last then
+         --  This detection method would work only when
+         --  Simple_GZip_Header'Last > Footer_Array'Last
+
+         if Filter.Offset = Simple_GZip_Header'Last + 1 then
+            Filter.Offset := Footer_Array'First;
+         end if;
+
+         declare
+            Footer : Footer_Array;
+         begin
+            Put_32 (Footer, Filter.CRC);
+            Put_32 (Footer (Footer'First + 4 .. Footer'Last),
+                    Unsigned_32 (Total_In (Filter)));
+            Add_Data (Footer);
+         end;
+      end if;
+   end Translate_GZip;
+
+   -------------
+   -- Version --
+   -------------
+
+   function Version return String is
+   begin
+      return Interfaces.C.Strings.Value (Thin.zlibVersion);
+   end Version;
+
+   -----------
+   -- Write --
+   -----------
+
+   procedure Write
+     (Filter : in out Filter_Type;
+      Item   : in     Ada.Streams.Stream_Element_Array;
+      Flush  : in     Flush_Mode := No_Flush)
+   is
+      Buffer   : Stream_Element_Array (1 .. Buffer_Size);
+      In_Last  : Stream_Element_Offset;
+      Out_Last : Stream_Element_Offset;
+      In_First : Stream_Element_Offset := Item'First;
+   begin
+      if Item'Length = 0 and Flush = No_Flush then
+         return;
+      end if;
+
+      loop
+         Translate
+           (Filter   => Filter,
+            In_Data  => Item (In_First .. Item'Last),
+            In_Last  => In_Last,
+            Out_Data => Buffer,
+            Out_Last => Out_Last,
+            Flush    => Flush);
+
+         if Out_Last >= Buffer'First then
+            Write (Buffer (1 .. Out_Last));
+         end if;
+
+         exit when In_Last = Item'Last or Stream_End (Filter);
+
+         In_First := In_Last + 1;
+      end loop;
+   end Write;
+
+end ZLib;

contrib/ada/zlib.ads

@@ -0,0 +1,328 @@
+------------------------------------------------------------------------------
+--                      ZLib for Ada thick binding.                         --
+--                                                                          --
+--              Copyright (C) 2002-2004 Dmitriy Anisimkov                   --
+--                                                                          --
+--  This library is free software; you can redistribute it and/or modify    --
+--  it under the terms of the GNU General Public License as published by    --
+--  the Free Software Foundation; either version 2 of the License, or (at   --
+--  your option) any later version.                                         --
+--                                                                          --
+--  This library is distributed in the hope that it will be useful, but     --
+--  WITHOUT ANY WARRANTY; without even the implied warranty of              --
+--  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU       --
+--  General Public License for more details.                                --
+--                                                                          --
+--  You should have received a copy of the GNU General Public License       --
+--  along with this library; if not, write to the Free Software Foundation, --
+--  Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.          --
+--                                                                          --
+--  As a special exception, if other files instantiate generics from this   --
+--  unit, or you link this unit with other files to produce an executable,  --
+--  this  unit  does not  by itself cause  the resulting executable to be   --
+--  covered by the GNU General Public License. This exception does not      --
+--  however invalidate any other reasons why the executable file  might be  --
+--  covered by the  GNU Public License.                                     --
+------------------------------------------------------------------------------
+
+--  $Id: zlib.ads,v 1.26 2004/09/06 06:53:19 vagul Exp $
+
+with Ada.Streams;
+
+with Interfaces;
+
+package ZLib is
+
+   ZLib_Error   : exception;
+   Status_Error : exception;
+
+   type Compression_Level is new Integer range -1 .. 9;
+
+   type Flush_Mode is private;
+
+   type Compression_Method is private;
+
+   type Window_Bits_Type is new Integer range 8 .. 15;
+
+   type Memory_Level_Type is new Integer range 1 .. 9;
+
+   type Unsigned_32 is new Interfaces.Unsigned_32;
+
+   type Strategy_Type is private;
+
+   type Header_Type is (None, Auto, Default, GZip);
+   --  Header type usage have a some limitation for inflate.
+   --  See comment for Inflate_Init.
+
+   subtype Count is Ada.Streams.Stream_Element_Count;
+
+   Default_Memory_Level : constant Memory_Level_Type := 8;
+   Default_Window_Bits  : constant Window_Bits_Type  := 15;
+
+   ----------------------------------
+   -- Compression method constants --
+   ----------------------------------
+
+   Deflated : constant Compression_Method;
+   --  Only one method allowed in this ZLib version
+
+   ---------------------------------
+   -- Compression level constants --
+   ---------------------------------
+
+   No_Compression      : constant Compression_Level := 0;
+   Best_Speed          : constant Compression_Level := 1;
+   Best_Compression    : constant Compression_Level := 9;
+   Default_Compression : constant Compression_Level := -1;
+
+   --------------------------
+   -- Flush mode constants --
+   --------------------------
+
+   No_Flush      : constant Flush_Mode;
+   --  Regular way for compression, no flush
+
+   Partial_Flush : constant Flush_Mode;
+   --  Will be removed, use Z_SYNC_FLUSH instead
+
+   Sync_Flush    : constant Flush_Mode;
+   --  All pending output is flushed to the output buffer and the output
+   --  is aligned on a byte boundary, so that the decompressor can get all
+   --  input data available so far. (In particular avail_in is zero after the
+   --  call if enough output space has been provided  before the call.)
+   --  Flushing may degrade compression for some compression algorithms and so
+   --  it should be used only when necessary.
+
+   Block_Flush   : constant Flush_Mode;
+   --  Z_BLOCK requests that inflate() stop
+   --  if and when it get to the next deflate block boundary. When decoding the
+   --  zlib or gzip format, this will cause inflate() to return immediately
+   --  after the header and before the first block. When doing a raw inflate,
+   --  inflate() will go ahead and process the first block, and will return
+   --  when it gets to the end of that block, or when it runs out of data.
+
+   Full_Flush    : constant Flush_Mode;
+   --  All output is flushed as with SYNC_FLUSH, and the compression state
+   --  is reset so that decompression can restart from this point if previous
+   --  compressed data has been damaged or if random access is desired. Using
+   --  Full_Flush too often can seriously degrade the compression.
+
+   Finish        : constant Flush_Mode;
+   --  Just for tell the compressor that input data is complete.
+
+   ------------------------------------
+   -- Compression strategy constants --
+   ------------------------------------
+
+   --  RLE stategy could be used only in version 1.2.0 and later.
+
+   Filtered         : constant Strategy_Type;
+   Huffman_Only     : constant Strategy_Type;
+   RLE              : constant Strategy_Type;
+   Default_Strategy : constant Strategy_Type;
+
+   Default_Buffer_Size : constant := 4096;
+
+   type Filter_Type is tagged limited private;
+   --  The filter is for compression and for decompression.
+   --  The usage of the type is depend of its initialization.
+
+   function Version return String;
+   pragma Inline (Version);
+   --  Return string representation of the ZLib version.
+
+   procedure Deflate_Init
+     (Filter       : in out Filter_Type;
+      Level        : in     Compression_Level  := Default_Compression;
+      Strategy     : in     Strategy_Type      := Default_Strategy;
+      Method       : in     Compression_Method := Deflated;
+      Window_Bits  : in     Window_Bits_Type   := Default_Window_Bits;
+      Memory_Level : in     Memory_Level_Type  := Default_Memory_Level;
+      Header       : in     Header_Type        := Default);
+   --  Compressor initialization.
+   --  When Header parameter is Auto or Default, then default zlib header
+   --  would be provided for compressed data.
+   --  When Header is GZip, then gzip header would be set instead of
+   --  default header.
+   --  When Header is None, no header would be set for compressed data.
+
+   procedure Inflate_Init
+     (Filter      : in out Filter_Type;
+      Window_Bits : in     Window_Bits_Type := Default_Window_Bits;
+      Header      : in     Header_Type      := Default);
+   --  Decompressor initialization.
+   --  Default header type mean that ZLib default header is expecting in the
+   --  input compressed stream.
+   --  Header type None mean that no header is expecting in the input stream.
+   --  GZip header type mean that GZip header is expecting in the
+   --  input compressed stream.
+   --  Auto header type mean that header type (GZip or Native) would be
+   --  detected automatically in the input stream.
+   --  Note that header types parameter values None, GZip and Auto are
+   --  supported for inflate routine only in ZLib versions 1.2.0.2 and later.
+   --  Deflate_Init is supporting all header types.
+
+   function Is_Open (Filter : in Filter_Type) return Boolean;
+   pragma Inline (Is_Open);
+   --  Is the filter opened for compression or decompression.
+
+   procedure Close
+     (Filter       : in out Filter_Type;
+      Ignore_Error : in     Boolean := False);
+   --  Closing the compression or decompressor.
+   --  If stream is closing before the complete and Ignore_Error is False,
+   --  The exception would be raised.
+
+   generic
+      with procedure Data_In
+        (Item : out Ada.Streams.Stream_Element_Array;
+         Last : out Ada.Streams.Stream_Element_Offset);
+      with procedure Data_Out
+        (Item : in Ada.Streams.Stream_Element_Array);
+   procedure Generic_Translate
+     (Filter          : in out Filter_Type;
+      In_Buffer_Size  : in     Integer := Default_Buffer_Size;
+      Out_Buffer_Size : in     Integer := Default_Buffer_Size);
+   --  Compress/decompress data fetch from Data_In routine and pass the result
+   --  to the Data_Out routine. User should provide Data_In and Data_Out
+   --  for compression/decompression data flow.
+   --  Compression or decompression depend on Filter initialization.
+
+   function Total_In (Filter : in Filter_Type) return Count;
+   pragma Inline (Total_In);
+   --  Returns total number of input bytes read so far
+
+   function Total_Out (Filter : in Filter_Type) return Count;
+   pragma Inline (Total_Out);
+   --  Returns total number of bytes output so far
+
+   function CRC32
+     (CRC    : in Unsigned_32;
+      Data   : in Ada.Streams.Stream_Element_Array)
+      return Unsigned_32;
+   pragma Inline (CRC32);
+   --  Compute CRC32, it could be necessary for make gzip format
+
+   procedure CRC32
+     (CRC  : in out Unsigned_32;
+      Data : in     Ada.Streams.Stream_Element_Array);
+   pragma Inline (CRC32);
+   --  Compute CRC32, it could be necessary for make gzip format
+
+   -------------------------------------------------
+   --  Below is more complex low level routines.  --
+   -------------------------------------------------
+
+   procedure Translate
+     (Filter    : in out Filter_Type;
+      In_Data   : in     Ada.Streams.Stream_Element_Array;
+      In_Last   :    out Ada.Streams.Stream_Element_Offset;
+      Out_Data  :    out Ada.Streams.Stream_Element_Array;
+      Out_Last  :    out Ada.Streams.Stream_Element_Offset;
+      Flush     : in     Flush_Mode);
+   --  Compress/decompress the In_Data buffer and place the result into
+   --  Out_Data. In_Last is the index of last element from In_Data accepted by
+   --  the Filter. Out_Last is the last element of the received data from
+   --  Filter. To tell the filter that incoming data are complete put the
+   --  Flush parameter to Finish.
+
+   function Stream_End (Filter : in Filter_Type) return Boolean;
+   pragma Inline (Stream_End);
+   --  Return the true when the stream is complete.
+
+   procedure Flush
+     (Filter    : in out Filter_Type;
+      Out_Data  :    out Ada.Streams.Stream_Element_Array;
+      Out_Last  :    out Ada.Streams.Stream_Element_Offset;
+      Flush     : in     Flush_Mode);
+   pragma Inline (Flush);
+   --  Flushing the data from the compressor.
+
+   generic
+      with procedure Write
+        (Item : in Ada.Streams.Stream_Element_Array);
+      --  User should provide this routine for accept
+      --  compressed/decompressed data.
+
+      Buffer_Size : in Ada.Streams.Stream_Element_Offset
+         := Default_Buffer_Size;
+      --  Buffer size for Write user routine.
+
+   procedure Write
+     (Filter  : in out Filter_Type;
+      Item    : in     Ada.Streams.Stream_Element_Array;
+      Flush   : in     Flush_Mode := No_Flush);
+   --  Compress/Decompress data from Item to the generic parameter procedure
+   --  Write. Output buffer size could be set in Buffer_Size generic parameter.
+
+   generic
+      with procedure Read
+        (Item : out Ada.Streams.Stream_Element_Array;
+         Last : out Ada.Streams.Stream_Element_Offset);
+      --  User should provide data for compression/decompression
+      --  thru this routine.
+
+      Buffer : in out Ada.Streams.Stream_Element_Array;
+      --  Buffer for keep remaining data from the previous
+      --  back read.
+
+      Rest_First, Rest_Last : in out Ada.Streams.Stream_Element_Offset;
+      --  Rest_First have to be initialized to Buffer'Last + 1
+      --  Rest_Last have to be initialized to Buffer'Last
+      --  before usage.
+
+      Allow_Read_Some : in Boolean := False;
+      --  Is it allowed to return Last < Item'Last before end of data.
+
+   procedure Read
+     (Filter : in out Filter_Type;
+      Item   :    out Ada.Streams.Stream_Element_Array;
+      Last   :    out Ada.Streams.Stream_Element_Offset;
+      Flush  : in     Flush_Mode := No_Flush);
+   --  Compress/Decompress data from generic parameter procedure Read to the
+   --  Item. User should provide Buffer and initialized Rest_First, Rest_Last
+   --  indicators. If Allow_Read_Some is True, Read routines could return
+   --  Last < Item'Last only at end of stream.
+
+private
+
+   use Ada.Streams;
+
+   pragma Assert (Ada.Streams.Stream_Element'Size    =    8);
+   pragma Assert (Ada.Streams.Stream_Element'Modulus = 2**8);
+
+   type Flush_Mode is new Integer range 0 .. 5;
+
+   type Compression_Method is new Integer range 8 .. 8;
+
+   type Strategy_Type is new Integer range 0 .. 3;
+
+   No_Flush      : constant Flush_Mode := 0;
+   Partial_Flush : constant Flush_Mode := 1;
+   Sync_Flush    : constant Flush_Mode := 2;
+   Full_Flush    : constant Flush_Mode := 3;
+   Finish        : constant Flush_Mode := 4;
+   Block_Flush   : constant Flush_Mode := 5;
+
+   Filtered         : constant Strategy_Type := 1;
+   Huffman_Only     : constant Strategy_Type := 2;
+   RLE              : constant Strategy_Type := 3;
+   Default_Strategy : constant Strategy_Type := 0;
+
+   Deflated : constant Compression_Method := 8;
+
+   type Z_Stream;
+
+   type Z_Stream_Access is access all Z_Stream;
+
+   type Filter_Type is tagged limited record
+      Strm        : Z_Stream_Access;
+      Compression : Boolean;
+      Stream_End  : Boolean;
+      Header      : Header_Type;
+      CRC         : Unsigned_32;
+      Offset      : Stream_Element_Offset;
+      --  Offset for gzip header/footer output.
+   end record;
+
+end ZLib;

contrib/ada/zlib.gpr

@@ -0,0 +1,20 @@
+project Zlib is
+
+   for Languages use ("Ada");
+   for Source_Dirs use (".");
+   for Object_Dir use ".";
+   for Main use ("test.adb", "mtest.adb", "read.adb", "buffer_demo");
+
+   package Compiler is
+      for Default_Switches ("ada") use ("-gnatwcfilopru", "-gnatVcdfimorst", "-gnatyabcefhiklmnoprst");
+   end Compiler;
+
+   package Linker is
+      for Default_Switches ("ada") use ("-lz");
+   end Linker;
+
+   package Builder is
+      for Default_Switches ("ada") use ("-s", "-gnatQ");
+   end Builder;
+
+end Zlib;

contrib/amd64/amd64-match.S

@@ -0,0 +1,452 @@
+/*
+ * match.S -- optimized version of longest_match()
+ * based on the similar work by Gilles Vollant, and Brian Raiter, written 1998
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the BSD License. Use by owners of Che Guevarra
+ * parafernalia is prohibited, where possible, and highly discouraged
+ * elsewhere.
+ */
+
+#ifndef NO_UNDERLINE
+#	define	match_init	_match_init
+#	define	longest_match	_longest_match
+#endif
+
+#define	scanend		ebx
+#define	scanendw	bx
+#define	chainlenwmask	edx /* high word: current chain len low word: s->wmask */
+#define	curmatch	rsi
+#define	curmatchd	esi
+#define	windowbestlen	r8
+#define	scanalign	r9
+#define	scanalignd	r9d
+#define	window		r10
+#define	bestlen		r11
+#define	bestlend	r11d
+#define	scanstart	r12d
+#define	scanstartw	r12w
+#define scan		r13
+#define nicematch	r14d
+#define	limit		r15
+#define	limitd		r15d
+#define prev		rcx
+
+/*
+ * The 258 is a "magic number, not a parameter -- changing it
+ * breaks the hell loose
+ */
+#define	MAX_MATCH	(258)
+#define	MIN_MATCH	(3)
+#define	MIN_LOOKAHEAD	(MAX_MATCH + MIN_MATCH + 1)
+#define	MAX_MATCH_8	((MAX_MATCH + 7) & ~7)
+
+/* stack frame offsets */
+#define	LocalVarsSize	(112)
+#define _chainlenwmask	( 8-LocalVarsSize)(%rsp)
+#define _windowbestlen	(16-LocalVarsSize)(%rsp)
+#define save_r14        (24-LocalVarsSize)(%rsp)
+#define save_rsi        (32-LocalVarsSize)(%rsp)
+#define save_rbx        (40-LocalVarsSize)(%rsp)
+#define save_r12        (56-LocalVarsSize)(%rsp)
+#define save_r13        (64-LocalVarsSize)(%rsp)
+#define save_r15        (80-LocalVarsSize)(%rsp)
+
+
+.globl	match_init, longest_match
+
+/*
+ * On AMD64 the first argument of a function (in our case -- the pointer to
+ * deflate_state structure) is passed in %rdi, hence our offsets below are
+ * all off of that.
+ */
+
+/* you can check the structure offset by running
+
+#include <stdlib.h>
+#include <stdio.h>
+#include "deflate.h"
+
+void print_depl()
+{
+deflate_state ds;
+deflate_state *s=&ds;
+printf("size pointer=%u\n",(int)sizeof(void*));
+
+printf("#define dsWSize         (%3u)(%%rdi)\n",(int)(((char*)&(s->w_size))-((char*)s)));
+printf("#define dsWMask         (%3u)(%%rdi)\n",(int)(((char*)&(s->w_mask))-((char*)s)));
+printf("#define dsWindow        (%3u)(%%rdi)\n",(int)(((char*)&(s->window))-((char*)s)));
+printf("#define dsPrev          (%3u)(%%rdi)\n",(int)(((char*)&(s->prev))-((char*)s)));
+printf("#define dsMatchLen      (%3u)(%%rdi)\n",(int)(((char*)&(s->match_length))-((char*)s)));
+printf("#define dsPrevMatch     (%3u)(%%rdi)\n",(int)(((char*)&(s->prev_match))-((char*)s)));
+printf("#define dsStrStart      (%3u)(%%rdi)\n",(int)(((char*)&(s->strstart))-((char*)s)));
+printf("#define dsMatchStart    (%3u)(%%rdi)\n",(int)(((char*)&(s->match_start))-((char*)s)));
+printf("#define dsLookahead     (%3u)(%%rdi)\n",(int)(((char*)&(s->lookahead))-((char*)s)));
+printf("#define dsPrevLen       (%3u)(%%rdi)\n",(int)(((char*)&(s->prev_length))-((char*)s)));
+printf("#define dsMaxChainLen   (%3u)(%%rdi)\n",(int)(((char*)&(s->max_chain_length))-((char*)s)));
+printf("#define dsGoodMatch     (%3u)(%%rdi)\n",(int)(((char*)&(s->good_match))-((char*)s)));
+printf("#define dsNiceMatch     (%3u)(%%rdi)\n",(int)(((char*)&(s->nice_match))-((char*)s)));
+}
+
+*/
+
+
+/*
+  to compile for XCode 3.2 on MacOSX x86_64
+  - run "gcc -g -c -DXCODE_MAC_X64_STRUCTURE amd64-match.S"
+ */
+
+
+#ifndef CURRENT_LINX_XCODE_MAC_X64_STRUCTURE
+#define dsWSize		( 68)(%rdi)
+#define dsWMask		( 76)(%rdi)
+#define dsWindow	( 80)(%rdi)
+#define dsPrev		( 96)(%rdi)
+#define dsMatchLen	(144)(%rdi)
+#define dsPrevMatch	(148)(%rdi)
+#define dsStrStart	(156)(%rdi)
+#define dsMatchStart	(160)(%rdi)
+#define dsLookahead	(164)(%rdi)
+#define dsPrevLen	(168)(%rdi)
+#define dsMaxChainLen	(172)(%rdi)
+#define dsGoodMatch	(188)(%rdi)
+#define dsNiceMatch	(192)(%rdi)
+
+#else 
+
+#ifndef STRUCT_OFFSET
+#	define STRUCT_OFFSET	(0)
+#endif
+
+
+#define dsWSize		( 56 + STRUCT_OFFSET)(%rdi)
+#define dsWMask		( 64 + STRUCT_OFFSET)(%rdi)
+#define dsWindow	( 72 + STRUCT_OFFSET)(%rdi)
+#define dsPrev		( 88 + STRUCT_OFFSET)(%rdi)
+#define dsMatchLen	(136 + STRUCT_OFFSET)(%rdi)
+#define dsPrevMatch	(140 + STRUCT_OFFSET)(%rdi)
+#define dsStrStart	(148 + STRUCT_OFFSET)(%rdi)
+#define dsMatchStart	(152 + STRUCT_OFFSET)(%rdi)
+#define dsLookahead	(156 + STRUCT_OFFSET)(%rdi)
+#define dsPrevLen	(160 + STRUCT_OFFSET)(%rdi)
+#define dsMaxChainLen	(164 + STRUCT_OFFSET)(%rdi)
+#define dsGoodMatch	(180 + STRUCT_OFFSET)(%rdi)
+#define dsNiceMatch	(184 + STRUCT_OFFSET)(%rdi)
+
+#endif
+
+
+
+
+.text
+
+/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
+
+longest_match:
+/*
+ * Retrieve the function arguments. %curmatch will hold cur_match
+ * throughout the entire function (passed via rsi on amd64).
+ * rdi will hold the pointer to the deflate_state (first arg on amd64)
+ */
+		mov     %rsi, save_rsi
+		mov     %rbx, save_rbx
+		mov	%r12, save_r12
+		mov     %r13, save_r13
+		mov     %r14, save_r14
+		mov     %r15, save_r15
+
+/* uInt wmask = s->w_mask;						*/
+/* unsigned chain_length = s->max_chain_length;				*/
+/* if (s->prev_length >= s->good_match) {				*/
+/*     chain_length >>= 2;						*/
+/* }									*/
+
+		movl	dsPrevLen, %eax
+		movl	dsGoodMatch, %ebx
+		cmpl	%ebx, %eax
+		movl	dsWMask, %eax
+		movl	dsMaxChainLen, %chainlenwmask
+		jl	LastMatchGood
+		shrl	$2, %chainlenwmask
+LastMatchGood:
+
+/* chainlen is decremented once beforehand so that the function can	*/
+/* use the sign flag instead of the zero flag for the exit test.	*/
+/* It is then shifted into the high word, to make room for the wmask	*/
+/* value, which it will always accompany.				*/
+
+		decl	%chainlenwmask
+		shll	$16, %chainlenwmask
+		orl	%eax, %chainlenwmask
+
+/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;	*/
+
+		movl	dsNiceMatch, %eax
+		movl	dsLookahead, %ebx
+		cmpl	%eax, %ebx
+		jl	LookaheadLess
+		movl	%eax, %ebx
+LookaheadLess:	movl	%ebx, %nicematch
+
+/* register Bytef *scan = s->window + s->strstart;			*/
+
+		mov	dsWindow, %window
+		movl	dsStrStart, %limitd
+		lea	(%limit, %window), %scan
+
+/* Determine how many bytes the scan ptr is off from being		*/
+/* dword-aligned.							*/
+
+		mov	%scan, %scanalign
+		negl	%scanalignd
+		andl	$3, %scanalignd
+
+/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ?			*/
+/*     s->strstart - (IPos)MAX_DIST(s) : NIL;				*/
+
+		movl	dsWSize, %eax
+		subl	$MIN_LOOKAHEAD, %eax
+		xorl	%ecx, %ecx
+		subl	%eax, %limitd
+		cmovng	%ecx, %limitd
+
+/* int best_len = s->prev_length;					*/
+
+		movl	dsPrevLen, %bestlend
+
+/* Store the sum of s->window + best_len in %windowbestlen locally, and in memory.	*/
+
+		lea	(%window, %bestlen), %windowbestlen
+		mov	%windowbestlen, _windowbestlen
+
+/* register ush scan_start = *(ushf*)scan;				*/
+/* register ush scan_end   = *(ushf*)(scan+best_len-1);			*/
+/* Posf *prev = s->prev;						*/
+
+		movzwl	(%scan), %scanstart
+		movzwl	-1(%scan, %bestlen), %scanend
+		mov	dsPrev, %prev
+
+/* Jump into the main loop.						*/
+
+		movl	%chainlenwmask, _chainlenwmask
+		jmp	LoopEntry
+
+.balign 16
+
+/* do {
+ *     match = s->window + cur_match;
+ *     if (*(ushf*)(match+best_len-1) != scan_end ||
+ *         *(ushf*)match != scan_start) continue;
+ *     [...]
+ * } while ((cur_match = prev[cur_match & wmask]) > limit
+ *          && --chain_length != 0);
+ *
+ * Here is the inner loop of the function. The function will spend the
+ * majority of its time in this loop, and majority of that time will
+ * be spent in the first ten instructions.
+ */
+LookupLoop:
+		andl	%chainlenwmask, %curmatchd
+		movzwl	(%prev, %curmatch, 2), %curmatchd
+		cmpl	%limitd, %curmatchd
+		jbe	LeaveNow
+		subl	$0x00010000, %chainlenwmask
+		js	LeaveNow
+LoopEntry:	cmpw	-1(%windowbestlen, %curmatch), %scanendw
+		jne	LookupLoop
+		cmpw	%scanstartw, (%window, %curmatch)
+		jne	LookupLoop
+
+/* Store the current value of chainlen.					*/
+		movl	%chainlenwmask, _chainlenwmask
+
+/* %scan is the string under scrutiny, and %prev to the string we	*/
+/* are hoping to match it up with. In actuality, %esi and %edi are	*/
+/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is	*/
+/* initialized to -(MAX_MATCH_8 - scanalign).				*/
+
+		mov	$(-MAX_MATCH_8), %rdx
+		lea	(%curmatch, %window), %windowbestlen
+		lea	MAX_MATCH_8(%windowbestlen, %scanalign), %windowbestlen
+		lea	MAX_MATCH_8(%scan, %scanalign), %prev
+
+/* the prefetching below makes very little difference... */
+		prefetcht1	(%windowbestlen, %rdx)
+		prefetcht1	(%prev, %rdx)
+
+/*
+ * Test the strings for equality, 8 bytes at a time. At the end,
+ * adjust %rdx so that it is offset to the exact byte that mismatched.
+ *
+ * It should be confessed that this loop usually does not represent
+ * much of the total running time. Replacing it with a more
+ * straightforward "rep cmpsb" would not drastically degrade
+ * performance -- unrolling it, for example, makes no difference.
+ */
+
+#undef USE_SSE	/* works, but is 6-7% slower, than non-SSE... */
+
+LoopCmps:
+#ifdef USE_SSE
+		/* Preload the SSE registers */
+		movdqu	  (%windowbestlen, %rdx), %xmm1
+		movdqu	  (%prev, %rdx), %xmm2
+		pcmpeqb	%xmm2, %xmm1
+		movdqu	16(%windowbestlen, %rdx), %xmm3
+		movdqu	16(%prev, %rdx), %xmm4
+		pcmpeqb	%xmm4, %xmm3
+		movdqu	32(%windowbestlen, %rdx), %xmm5
+		movdqu	32(%prev, %rdx), %xmm6
+		pcmpeqb	%xmm6, %xmm5
+		movdqu	48(%windowbestlen, %rdx), %xmm7
+		movdqu	48(%prev, %rdx), %xmm8
+		pcmpeqb	%xmm8, %xmm7
+
+		/* Check the comparisions' results */
+		pmovmskb %xmm1, %rax
+		notw	%ax
+		bsfw	%ax, %ax
+		jnz	LeaveLoopCmps
+		
+		/* this is the only iteration of the loop with a possibility of having
+		   incremented rdx by 0x108 (each loop iteration add 16*4 = 0x40 
+		   and (0x40*4)+8=0x108 */
+		add	$8, %rdx
+		jz LenMaximum
+		add	$8, %rdx
+
+		
+		pmovmskb %xmm3, %rax
+		notw	%ax
+		bsfw	%ax, %ax
+		jnz	LeaveLoopCmps
+		
+		
+		add	$16, %rdx
+
+
+		pmovmskb %xmm5, %rax
+		notw	%ax
+		bsfw	%ax, %ax
+		jnz	LeaveLoopCmps
+		
+		add	$16, %rdx
+
+
+		pmovmskb %xmm7, %rax
+		notw	%ax
+		bsfw	%ax, %ax
+		jnz	LeaveLoopCmps
+		
+		add	$16, %rdx
+		
+		jmp	LoopCmps
+LeaveLoopCmps:	add	%rax, %rdx
+#else
+		mov	(%windowbestlen, %rdx), %rax
+		xor	(%prev, %rdx), %rax
+		jnz	LeaveLoopCmps
+		
+		mov	8(%windowbestlen, %rdx), %rax
+		xor	8(%prev, %rdx), %rax
+		jnz	LeaveLoopCmps8
+
+		mov	16(%windowbestlen, %rdx), %rax
+		xor	16(%prev, %rdx), %rax
+		jnz	LeaveLoopCmps16
+				
+		add	$24, %rdx
+		jnz	LoopCmps
+		jmp	LenMaximum
+#	if 0
+/*
+ * This three-liner is tantalizingly simple, but bsf is a slow instruction,
+ * and the complicated alternative down below is quite a bit faster. Sad...
+ */
+
+LeaveLoopCmps:	bsf	%rax, %rax /* find the first non-zero bit */
+		shrl	$3, %eax /* divide by 8 to get the byte */
+		add	%rax, %rdx
+#	else
+LeaveLoopCmps16:
+		add	$8, %rdx
+LeaveLoopCmps8:
+		add	$8, %rdx
+LeaveLoopCmps:	testl   $0xFFFFFFFF, %eax /* Check the first 4 bytes */
+		jnz     Check16
+		add     $4, %rdx
+		shr     $32, %rax
+Check16:        testw   $0xFFFF, %ax
+		jnz     LenLower
+		add	$2, %rdx
+		shrl	$16, %eax
+LenLower:	subb	$1, %al
+		adc	$0, %rdx
+#	endif
+#endif
+
+/* Calculate the length of the match. If it is longer than MAX_MATCH,	*/
+/* then automatically accept it as the best possible match and leave.	*/
+
+		lea	(%prev, %rdx), %rax
+		sub	%scan, %rax
+		cmpl	$MAX_MATCH, %eax
+		jge	LenMaximum
+
+/* If the length of the match is not longer than the best match we	*/
+/* have so far, then forget it and return to the lookup loop.		*/
+
+		cmpl	%bestlend, %eax
+		jg	LongerMatch
+		mov	_windowbestlen, %windowbestlen
+		mov	dsPrev, %prev
+		movl	_chainlenwmask, %edx
+		jmp	LookupLoop
+
+/*         s->match_start = cur_match;					*/
+/*         best_len = len;						*/
+/*         if (len >= nice_match) break;				*/
+/*         scan_end = *(ushf*)(scan+best_len-1);			*/
+
+LongerMatch:
+		movl	%eax, %bestlend
+		movl	%curmatchd, dsMatchStart
+		cmpl	%nicematch, %eax
+		jge	LeaveNow
+
+		lea	(%window, %bestlen), %windowbestlen
+		mov	%windowbestlen, _windowbestlen
+
+		movzwl	-1(%scan, %rax), %scanend
+		mov	dsPrev, %prev
+		movl	_chainlenwmask, %chainlenwmask
+		jmp	LookupLoop
+
+/* Accept the current string, with the maximum possible length.		*/
+
+LenMaximum:
+		movl	$MAX_MATCH, %bestlend
+		movl	%curmatchd, dsMatchStart
+
+/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len;		*/
+/* return s->lookahead;							*/
+
+LeaveNow:
+		movl	dsLookahead, %eax
+		cmpl	%eax, %bestlend
+		cmovngl	%bestlend, %eax
+LookaheadRet:
+
+/* Restore the registers and return from whence we came.			*/
+
+	mov	save_rsi, %rsi
+	mov	save_rbx, %rbx
+	mov	save_r12, %r12
+	mov	save_r13, %r13
+	mov	save_r14, %r14
+	mov	save_r15, %r15
+
+	ret
+
+match_init:	ret

contrib/asm686/README.686

@@ -0,0 +1,51 @@
+This is a patched version of zlib, modified to use
+Pentium-Pro-optimized assembly code in the deflation algorithm. The
+files changed/added by this patch are:
+
+README.686
+match.S
+
+The speedup that this patch provides varies, depending on whether the
+compiler used to build the original version of zlib falls afoul of the
+PPro's speed traps. My own tests show a speedup of around 10-20% at
+the default compression level, and 20-30% using -9, against a version
+compiled using gcc 2.7.2.3. Your mileage may vary.
+
+Note that this code has been tailored for the PPro/PII in particular,
+and will not perform particuarly well on a Pentium.
+
+If you are using an assembler other than GNU as, you will have to
+translate match.S to use your assembler's syntax. (Have fun.)
+
+Brian Raiter
+breadbox@muppetlabs.com
+April, 1998
+
+
+Added for zlib 1.1.3:
+
+The patches come from
+http://www.muppetlabs.com/~breadbox/software/assembly.html
+
+To compile zlib with this asm file, copy match.S to the zlib directory
+then do:
+
+CFLAGS="-O3 -DASMV" ./configure
+make OBJA=match.o
+
+
+Update:
+
+I've been ignoring these assembly routines for years, believing that
+gcc's generated code had caught up with it sometime around gcc 2.95
+and the major rearchitecting of the Pentium 4. However, I recently
+learned that, despite what I believed, this code still has some life
+in it. On the Pentium 4 and AMD64 chips, it continues to run about 8%
+faster than the code produced by gcc 4.1.
+
+In acknowledgement of its continuing usefulness, I've altered the
+license to match that of the rest of zlib. Share and Enjoy!
+
+Brian Raiter
+breadbox@muppetlabs.com
+April, 2007

contrib/asm686/match.S

@@ -0,0 +1,343 @@
+/* match.S -- x86 assembly version of the zlib longest_match() function.
+ * Optimized for the Intel 686 chips (PPro and later).
+ *
+ * Copyright (C) 1998, 2007 Brian Raiter <breadbox@muppetlabs.com>
+ *
+ * This software is provided 'as-is', without any express or implied
+ * warranty.  In no event will the author be held liable for any damages
+ * arising from the use of this software.
+ *
+ * Permission is granted to anyone to use this software for any purpose,
+ * including commercial applications, and to alter it and redistribute it
+ * freely, subject to the following restrictions:
+ *
+ * 1. The origin of this software must not be misrepresented; you must not
+ *    claim that you wrote the original software. If you use this software
+ *    in a product, an acknowledgment in the product documentation would be
+ *    appreciated but is not required.
+ * 2. Altered source versions must be plainly marked as such, and must not be
+ *    misrepresented as being the original software.
+ * 3. This notice may not be removed or altered from any source distribution.
+ */
+
+#ifndef NO_UNDERLINE
+#define	match_init	_match_init
+#define	longest_match	_longest_match
+#endif
+
+#define	MAX_MATCH	(258)
+#define	MIN_MATCH	(3)
+#define	MIN_LOOKAHEAD	(MAX_MATCH + MIN_MATCH + 1)
+#define	MAX_MATCH_8	((MAX_MATCH + 7) & ~7)
+
+/* stack frame offsets */
+
+#define	chainlenwmask		0	/* high word: current chain len	*/
+					/* low word: s->wmask		*/
+#define	window			4	/* local copy of s->window	*/
+#define	windowbestlen		8	/* s->window + bestlen		*/
+#define	scanstart		16	/* first two bytes of string	*/
+#define	scanend			12	/* last two bytes of string	*/
+#define	scanalign		20	/* dword-misalignment of string	*/
+#define	nicematch		24	/* a good enough match size	*/
+#define	bestlen			28	/* size of best match so far	*/
+#define	scan			32	/* ptr to string wanting match	*/
+
+#define	LocalVarsSize		(36)
+/*	saved ebx		36 */
+/*	saved edi		40 */
+/*	saved esi		44 */
+/*	saved ebp		48 */
+/*	return address		52 */
+#define	deflatestate		56	/* the function arguments	*/
+#define	curmatch		60
+
+/* All the +zlib1222add offsets are due to the addition of fields
+ *  in zlib in the deflate_state structure since the asm code was first written
+ * (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+ * (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+ * if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
+ */
+
+#define zlib1222add		(8)
+
+#define	dsWSize			(36+zlib1222add)
+#define	dsWMask			(44+zlib1222add)
+#define	dsWindow		(48+zlib1222add)
+#define	dsPrev			(56+zlib1222add)
+#define	dsMatchLen		(88+zlib1222add)
+#define	dsPrevMatch		(92+zlib1222add)
+#define	dsStrStart		(100+zlib1222add)
+#define	dsMatchStart		(104+zlib1222add)
+#define	dsLookahead		(108+zlib1222add)
+#define	dsPrevLen		(112+zlib1222add)
+#define	dsMaxChainLen		(116+zlib1222add)
+#define	dsGoodMatch		(132+zlib1222add)
+#define	dsNiceMatch		(136+zlib1222add)
+
+
+.file "match.S"
+
+.globl	match_init, longest_match
+
+.text
+
+/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
+
+longest_match:
+
+/* Save registers that the compiler may be using, and adjust %esp to	*/
+/* make room for our stack frame.					*/
+
+		pushl	%ebp
+		pushl	%edi
+		pushl	%esi
+		pushl	%ebx
+		subl	$LocalVarsSize, %esp
+
+/* Retrieve the function arguments. %ecx will hold cur_match		*/
+/* throughout the entire function. %edx will hold the pointer to the	*/
+/* deflate_state structure during the function's setup (before		*/
+/* entering the main loop).						*/
+
+		movl	deflatestate(%esp), %edx
+		movl	curmatch(%esp), %ecx
+
+/* uInt wmask = s->w_mask;						*/
+/* unsigned chain_length = s->max_chain_length;				*/
+/* if (s->prev_length >= s->good_match) {				*/
+/*     chain_length >>= 2;						*/
+/* }									*/
+
+		movl	dsPrevLen(%edx), %eax
+		movl	dsGoodMatch(%edx), %ebx
+		cmpl	%ebx, %eax
+		movl	dsWMask(%edx), %eax
+		movl	dsMaxChainLen(%edx), %ebx
+		jl	LastMatchGood
+		shrl	$2, %ebx
+LastMatchGood:
+
+/* chainlen is decremented once beforehand so that the function can	*/
+/* use the sign flag instead of the zero flag for the exit test.	*/
+/* It is then shifted into the high word, to make room for the wmask	*/
+/* value, which it will always accompany.				*/
+
+		decl	%ebx
+		shll	$16, %ebx
+		orl	%eax, %ebx
+		movl	%ebx, chainlenwmask(%esp)
+
+/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;	*/
+
+		movl	dsNiceMatch(%edx), %eax
+		movl	dsLookahead(%edx), %ebx
+		cmpl	%eax, %ebx
+		jl	LookaheadLess
+		movl	%eax, %ebx
+LookaheadLess:	movl	%ebx, nicematch(%esp)
+
+/* register Bytef *scan = s->window + s->strstart;			*/
+
+		movl	dsWindow(%edx), %esi
+		movl	%esi, window(%esp)
+		movl	dsStrStart(%edx), %ebp
+		lea	(%esi,%ebp), %edi
+		movl	%edi, scan(%esp)
+
+/* Determine how many bytes the scan ptr is off from being		*/
+/* dword-aligned.							*/
+
+		movl	%edi, %eax
+		negl	%eax
+		andl	$3, %eax
+		movl	%eax, scanalign(%esp)
+
+/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ?			*/
+/*     s->strstart - (IPos)MAX_DIST(s) : NIL;				*/
+
+		movl	dsWSize(%edx), %eax
+		subl	$MIN_LOOKAHEAD, %eax
+		subl	%eax, %ebp
+		jg	LimitPositive
+		xorl	%ebp, %ebp
+LimitPositive:
+
+/* int best_len = s->prev_length;					*/
+
+		movl	dsPrevLen(%edx), %eax
+		movl	%eax, bestlen(%esp)
+
+/* Store the sum of s->window + best_len in %esi locally, and in %esi.	*/
+
+		addl	%eax, %esi
+		movl	%esi, windowbestlen(%esp)
+
+/* register ush scan_start = *(ushf*)scan;				*/
+/* register ush scan_end   = *(ushf*)(scan+best_len-1);			*/
+/* Posf *prev = s->prev;						*/
+
+		movzwl	(%edi), %ebx
+		movl	%ebx, scanstart(%esp)
+		movzwl	-1(%edi,%eax), %ebx
+		movl	%ebx, scanend(%esp)
+		movl	dsPrev(%edx), %edi
+
+/* Jump into the main loop.						*/
+
+		movl	chainlenwmask(%esp), %edx
+		jmp	LoopEntry
+
+.balign 16
+
+/* do {
+ *     match = s->window + cur_match;
+ *     if (*(ushf*)(match+best_len-1) != scan_end ||
+ *         *(ushf*)match != scan_start) continue;
+ *     [...]
+ * } while ((cur_match = prev[cur_match & wmask]) > limit
+ *          && --chain_length != 0);
+ *
+ * Here is the inner loop of the function. The function will spend the
+ * majority of its time in this loop, and majority of that time will
+ * be spent in the first ten instructions.
+ *
+ * Within this loop:
+ * %ebx = scanend
+ * %ecx = curmatch
+ * %edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
+ * %esi = windowbestlen - i.e., (window + bestlen)
+ * %edi = prev
+ * %ebp = limit
+ */
+LookupLoop:
+		andl	%edx, %ecx
+		movzwl	(%edi,%ecx,2), %ecx
+		cmpl	%ebp, %ecx
+		jbe	LeaveNow
+		subl	$0x00010000, %edx
+		js	LeaveNow
+LoopEntry:	movzwl	-1(%esi,%ecx), %eax
+		cmpl	%ebx, %eax
+		jnz	LookupLoop
+		movl	window(%esp), %eax
+		movzwl	(%eax,%ecx), %eax
+		cmpl	scanstart(%esp), %eax
+		jnz	LookupLoop
+
+/* Store the current value of chainlen.					*/
+
+		movl	%edx, chainlenwmask(%esp)
+
+/* Point %edi to the string under scrutiny, and %esi to the string we	*/
+/* are hoping to match it up with. In actuality, %esi and %edi are	*/
+/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is	*/
+/* initialized to -(MAX_MATCH_8 - scanalign).				*/
+
+		movl	window(%esp), %esi
+		movl	scan(%esp), %edi
+		addl	%ecx, %esi
+		movl	scanalign(%esp), %eax
+		movl	$(-MAX_MATCH_8), %edx
+		lea	MAX_MATCH_8(%edi,%eax), %edi
+		lea	MAX_MATCH_8(%esi,%eax), %esi
+
+/* Test the strings for equality, 8 bytes at a time. At the end,
+ * adjust %edx so that it is offset to the exact byte that mismatched.
+ *
+ * We already know at this point that the first three bytes of the
+ * strings match each other, and they can be safely passed over before
+ * starting the compare loop. So what this code does is skip over 0-3
+ * bytes, as much as necessary in order to dword-align the %edi
+ * pointer. (%esi will still be misaligned three times out of four.)
+ *
+ * It should be confessed that this loop usually does not represent
+ * much of the total running time. Replacing it with a more
+ * straightforward "rep cmpsb" would not drastically degrade
+ * performance.
+ */
+LoopCmps:
+		movl	(%esi,%edx), %eax
+		xorl	(%edi,%edx), %eax
+		jnz	LeaveLoopCmps
+		movl	4(%esi,%edx), %eax
+		xorl	4(%edi,%edx), %eax
+		jnz	LeaveLoopCmps4
+		addl	$8, %edx
+		jnz	LoopCmps
+		jmp	LenMaximum
+LeaveLoopCmps4:	addl	$4, %edx
+LeaveLoopCmps:	testl	$0x0000FFFF, %eax
+		jnz	LenLower
+		addl	$2, %edx
+		shrl	$16, %eax
+LenLower:	subb	$1, %al
+		adcl	$0, %edx
+
+/* Calculate the length of the match. If it is longer than MAX_MATCH,	*/
+/* then automatically accept it as the best possible match and leave.	*/
+
+		lea	(%edi,%edx), %eax
+		movl	scan(%esp), %edi
+		subl	%edi, %eax
+		cmpl	$MAX_MATCH, %eax
+		jge	LenMaximum
+
+/* If the length of the match is not longer than the best match we	*/
+/* have so far, then forget it and return to the lookup loop.		*/
+
+		movl	deflatestate(%esp), %edx
+		movl	bestlen(%esp), %ebx
+		cmpl	%ebx, %eax
+		jg	LongerMatch
+		movl	windowbestlen(%esp), %esi
+		movl	dsPrev(%edx), %edi
+		movl	scanend(%esp), %ebx
+		movl	chainlenwmask(%esp), %edx
+		jmp	LookupLoop
+
+/*         s->match_start = cur_match;					*/
+/*         best_len = len;						*/
+/*         if (len >= nice_match) break;				*/
+/*         scan_end = *(ushf*)(scan+best_len-1);			*/
+
+LongerMatch:	movl	nicematch(%esp), %ebx
+		movl	%eax, bestlen(%esp)
+		movl	%ecx, dsMatchStart(%edx)
+		cmpl	%ebx, %eax
+		jge	LeaveNow
+		movl	window(%esp), %esi
+		addl	%eax, %esi
+		movl	%esi, windowbestlen(%esp)
+		movzwl	-1(%edi,%eax), %ebx
+		movl	dsPrev(%edx), %edi
+		movl	%ebx, scanend(%esp)
+		movl	chainlenwmask(%esp), %edx
+		jmp	LookupLoop
+
+/* Accept the current string, with the maximum possible length.		*/
+
+LenMaximum:	movl	deflatestate(%esp), %edx
+		movl	$MAX_MATCH, bestlen(%esp)
+		movl	%ecx, dsMatchStart(%edx)
+
+/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len;		*/
+/* return s->lookahead;							*/
+
+LeaveNow:
+		movl	deflatestate(%esp), %edx
+		movl	bestlen(%esp), %ebx
+		movl	dsLookahead(%edx), %eax
+		cmpl	%eax, %ebx
+		jg	LookaheadRet
+		movl	%ebx, %eax
+LookaheadRet:
+
+/* Restore the stack and return from whence we came.			*/
+
+		addl	$LocalVarsSize, %esp
+		popl	%ebx
+		popl	%esi
+		popl	%edi
+		popl	%ebp
+match_init:	ret

contrib/blast/Makefile

@@ -0,0 +1,8 @@
+blast: blast.c blast.h
+	cc -DTEST -o blast blast.c
+
+test: blast
+	blast < test.pk | cmp - test.txt
+
+clean:
+	rm -f blast blast.o

contrib/blast/README

@@ -0,0 +1,4 @@
+Read blast.h for purpose and usage.
+
+Mark Adler
+madler@alumni.caltech.edu

contrib/blast/blast.c

@@ -0,0 +1,444 @@
+/* blast.c
+ * Copyright (C) 2003 Mark Adler
+ * For conditions of distribution and use, see copyright notice in blast.h
+ * version 1.1, 16 Feb 2003
+ *
+ * blast.c decompresses data compressed by the PKWare Compression Library.
+ * This function provides functionality similar to the explode() function of
+ * the PKWare library, hence the name "blast".
+ *
+ * This decompressor is based on the excellent format description provided by
+ * Ben Rudiak-Gould in comp.compression on August 13, 2001.  Interestingly, the
+ * example Ben provided in the post is incorrect.  The distance 110001 should
+ * instead be 111000.  When corrected, the example byte stream becomes:
+ *
+ *    00 04 82 24 25 8f 80 7f
+ *
+ * which decompresses to "AIAIAIAIAIAIA" (without the quotes).
+ */
+
+/*
+ * Change history:
+ *
+ * 1.0  12 Feb 2003     - First version
+ * 1.1  16 Feb 2003     - Fixed distance check for > 4 GB uncompressed data
+ */
+
+#include <setjmp.h>             /* for setjmp(), longjmp(), and jmp_buf */
+#include "blast.h"              /* prototype for blast() */
+
+#define local static            /* for local function definitions */
+#define MAXBITS 13              /* maximum code length */
+#define MAXWIN 4096             /* maximum window size */
+
+/* input and output state */
+struct state {
+    /* input state */
+    blast_in infun;             /* input function provided by user */
+    void *inhow;                /* opaque information passed to infun() */
+    unsigned char *in;          /* next input location */
+    unsigned left;              /* available input at in */
+    int bitbuf;                 /* bit buffer */
+    int bitcnt;                 /* number of bits in bit buffer */
+
+    /* input limit error return state for bits() and decode() */
+    jmp_buf env;
+
+    /* output state */
+    blast_out outfun;           /* output function provided by user */
+    void *outhow;               /* opaque information passed to outfun() */
+    unsigned next;              /* index of next write location in out[] */
+    int first;                  /* true to check distances (for first 4K) */
+    unsigned char out[MAXWIN];  /* output buffer and sliding window */
+};
+
+/*
+ * Return need bits from the input stream.  This always leaves less than
+ * eight bits in the buffer.  bits() works properly for need == 0.
+ *
+ * Format notes:
+ *
+ * - Bits are stored in bytes from the least significant bit to the most
+ *   significant bit.  Therefore bits are dropped from the bottom of the bit
+ *   buffer, using shift right, and new bytes are appended to the top of the
+ *   bit buffer, using shift left.
+ */
+local int bits(struct state *s, int need)
+{
+    int val;            /* bit accumulator */
+
+    /* load at least need bits into val */
+    val = s->bitbuf;
+    while (s->bitcnt < need) {
+        if (s->left == 0) {
+            s->left = s->infun(s->inhow, &(s->in));
+            if (s->left == 0) longjmp(s->env, 1);       /* out of input */
+        }
+        val |= (int)(*(s->in)++) << s->bitcnt;          /* load eight bits */
+        s->left--;
+        s->bitcnt += 8;
+    }
+
+    /* drop need bits and update buffer, always zero to seven bits left */
+    s->bitbuf = val >> need;
+    s->bitcnt -= need;
+
+    /* return need bits, zeroing the bits above that */
+    return val & ((1 << need) - 1);
+}
+
+/*
+ * Huffman code decoding tables.  count[1..MAXBITS] is the number of symbols of
+ * each length, which for a canonical code are stepped through in order.
+ * symbol[] are the symbol values in canonical order, where the number of
+ * entries is the sum of the counts in count[].  The decoding process can be
+ * seen in the function decode() below.
+ */
+struct huffman {
+    short *count;       /* number of symbols of each length */
+    short *symbol;      /* canonically ordered symbols */
+};
+
+/*
+ * Decode a code from the stream s using huffman table h.  Return the symbol or
+ * a negative value if there is an error.  If all of the lengths are zero, i.e.
+ * an empty code, or if the code is incomplete and an invalid code is received,
+ * then -9 is returned after reading MAXBITS bits.
+ *
+ * Format notes:
+ *
+ * - The codes as stored in the compressed data are bit-reversed relative to
+ *   a simple integer ordering of codes of the same lengths.  Hence below the
+ *   bits are pulled from the compressed data one at a time and used to
+ *   build the code value reversed from what is in the stream in order to
+ *   permit simple integer comparisons for decoding.
+ *
+ * - The first code for the shortest length is all ones.  Subsequent codes of
+ *   the same length are simply integer decrements of the previous code.  When
+ *   moving up a length, a one bit is appended to the code.  For a complete
+ *   code, the last code of the longest length will be all zeros.  To support
+ *   this ordering, the bits pulled during decoding are inverted to apply the
+ *   more "natural" ordering starting with all zeros and incrementing.
+ */
+local int decode(struct state *s, struct huffman *h)
+{
+    int len;            /* current number of bits in code */
+    int code;           /* len bits being decoded */
+    int first;          /* first code of length len */
+    int count;          /* number of codes of length len */
+    int index;          /* index of first code of length len in symbol table */
+    int bitbuf;         /* bits from stream */
+    int left;           /* bits left in next or left to process */
+    short *next;        /* next number of codes */
+
+    bitbuf = s->bitbuf;
+    left = s->bitcnt;
+    code = first = index = 0;
+    len = 1;
+    next = h->count + 1;
+    while (1) {
+        while (left--) {
+            code |= (bitbuf & 1) ^ 1;   /* invert code */
+            bitbuf >>= 1;
+            count = *next++;
+            if (code < first + count) { /* if length len, return symbol */
+                s->bitbuf = bitbuf;
+                s->bitcnt = (s->bitcnt - len) & 7;
+                return h->symbol[index + (code - first)];
+            }
+            index += count;             /* else update for next length */
+            first += count;
+            first <<= 1;
+            code <<= 1;
+            len++;
+        }
+        left = (MAXBITS+1) - len;
+        if (left == 0) break;
+        if (s->left == 0) {
+            s->left = s->infun(s->inhow, &(s->in));
+            if (s->left == 0) longjmp(s->env, 1);       /* out of input */
+        }
+        bitbuf = *(s->in)++;
+        s->left--;
+        if (left > 8) left = 8;
+    }
+    return -9;                          /* ran out of codes */
+}
+
+/*
+ * Given a list of repeated code lengths rep[0..n-1], where each byte is a
+ * count (high four bits + 1) and a code length (low four bits), generate the
+ * list of code lengths.  This compaction reduces the size of the object code.
+ * Then given the list of code lengths length[0..n-1] representing a canonical
+ * Huffman code for n symbols, construct the tables required to decode those
+ * codes.  Those tables are the number of codes of each length, and the symbols
+ * sorted by length, retaining their original order within each length.  The
+ * return value is zero for a complete code set, negative for an over-
+ * subscribed code set, and positive for an incomplete code set.  The tables
+ * can be used if the return value is zero or positive, but they cannot be used
+ * if the return value is negative.  If the return value is zero, it is not
+ * possible for decode() using that table to return an error--any stream of
+ * enough bits will resolve to a symbol.  If the return value is positive, then
+ * it is possible for decode() using that table to return an error for received
+ * codes past the end of the incomplete lengths.
+ */
+local int construct(struct huffman *h, const unsigned char *rep, int n)
+{
+    int symbol;         /* current symbol when stepping through length[] */
+    int len;            /* current length when stepping through h->count[] */
+    int left;           /* number of possible codes left of current length */
+    short offs[MAXBITS+1];      /* offsets in symbol table for each length */
+    short length[256];  /* code lengths */
+
+    /* convert compact repeat counts into symbol bit length list */
+    symbol = 0;
+    do {
+        len = *rep++;
+        left = (len >> 4) + 1;
+        len &= 15;
+        do {
+            length[symbol++] = len;
+        } while (--left);
+    } while (--n);
+    n = symbol;
+
+    /* count number of codes of each length */
+    for (len = 0; len <= MAXBITS; len++)
+        h->count[len] = 0;
+    for (symbol = 0; symbol < n; symbol++)
+        (h->count[length[symbol]])++;   /* assumes lengths are within bounds */
+    if (h->count[0] == n)               /* no codes! */
+        return 0;                       /* complete, but decode() will fail */
+
+    /* check for an over-subscribed or incomplete set of lengths */
+    left = 1;                           /* one possible code of zero length */
+    for (len = 1; len <= MAXBITS; len++) {
+        left <<= 1;                     /* one more bit, double codes left */
+        left -= h->count[len];          /* deduct count from possible codes */
+        if (left < 0) return left;      /* over-subscribed--return negative */
+    }                                   /* left > 0 means incomplete */
+
+    /* generate offsets into symbol table for each length for sorting */
+    offs[1] = 0;
+    for (len = 1; len < MAXBITS; len++)
+        offs[len + 1] = offs[len] + h->count[len];
+
+    /*
+     * put symbols in table sorted by length, by symbol order within each
+     * length
+     */
+    for (symbol = 0; symbol < n; symbol++)
+        if (length[symbol] != 0)
+            h->symbol[offs[length[symbol]]++] = symbol;
+
+    /* return zero for complete set, positive for incomplete set */
+    return left;
+}
+
+/*
+ * Decode PKWare Compression Library stream.
+ *
+ * Format notes:
+ *
+ * - First byte is 0 if literals are uncoded or 1 if they are coded.  Second
+ *   byte is 4, 5, or 6 for the number of extra bits in the distance code.
+ *   This is the base-2 logarithm of the dictionary size minus six.
+ *
+ * - Compressed data is a combination of literals and length/distance pairs
+ *   terminated by an end code.  Literals are either Huffman coded or
+ *   uncoded bytes.  A length/distance pair is a coded length followed by a
+ *   coded distance to represent a string that occurs earlier in the
+ *   uncompressed data that occurs again at the current location.
+ *
+ * - A bit preceding a literal or length/distance pair indicates which comes
+ *   next, 0 for literals, 1 for length/distance.
+ *
+ * - If literals are uncoded, then the next eight bits are the literal, in the
+ *   normal bit order in th stream, i.e. no bit-reversal is needed. Similarly,
+ *   no bit reversal is needed for either the length extra bits or the distance
+ *   extra bits.
+ *
+ * - Literal bytes are simply written to the output.  A length/distance pair is
+ *   an instruction to copy previously uncompressed bytes to the output.  The
+ *   copy is from distance bytes back in the output stream, copying for length
+ *   bytes.
+ *
+ * - Distances pointing before the beginning of the output data are not
+ *   permitted.
+ *
+ * - Overlapped copies, where the length is greater than the distance, are
+ *   allowed and common.  For example, a distance of one and a length of 518
+ *   simply copies the last byte 518 times.  A distance of four and a length of
+ *   twelve copies the last four bytes three times.  A simple forward copy
+ *   ignoring whether the length is greater than the distance or not implements
+ *   this correctly.
+ */
+local int decomp(struct state *s)
+{
+    int lit;            /* true if literals are coded */
+    int dict;           /* log2(dictionary size) - 6 */
+    int symbol;         /* decoded symbol, extra bits for distance */
+    int len;            /* length for copy */
+    int dist;           /* distance for copy */
+    int copy;           /* copy counter */
+    unsigned char *from, *to;   /* copy pointers */
+    static int virgin = 1;                              /* build tables once */
+    static short litcnt[MAXBITS+1], litsym[256];        /* litcode memory */
+    static short lencnt[MAXBITS+1], lensym[16];         /* lencode memory */
+    static short distcnt[MAXBITS+1], distsym[64];       /* distcode memory */
+    static struct huffman litcode = {litcnt, litsym};   /* length code */
+    static struct huffman lencode = {lencnt, lensym};   /* length code */
+    static struct huffman distcode = {distcnt, distsym};/* distance code */
+        /* bit lengths of literal codes */
+    static const unsigned char litlen[] = {
+        11, 124, 8, 7, 28, 7, 188, 13, 76, 4, 10, 8, 12, 10, 12, 10, 8, 23, 8,
+        9, 7, 6, 7, 8, 7, 6, 55, 8, 23, 24, 12, 11, 7, 9, 11, 12, 6, 7, 22, 5,
+        7, 24, 6, 11, 9, 6, 7, 22, 7, 11, 38, 7, 9, 8, 25, 11, 8, 11, 9, 12,
+        8, 12, 5, 38, 5, 38, 5, 11, 7, 5, 6, 21, 6, 10, 53, 8, 7, 24, 10, 27,
+        44, 253, 253, 253, 252, 252, 252, 13, 12, 45, 12, 45, 12, 61, 12, 45,
+        44, 173};
+        /* bit lengths of length codes 0..15 */
+    static const unsigned char lenlen[] = {2, 35, 36, 53, 38, 23};
+        /* bit lengths of distance codes 0..63 */
+    static const unsigned char distlen[] = {2, 20, 53, 230, 247, 151, 248};
+    static const short base[16] = {     /* base for length codes */
+        3, 2, 4, 5, 6, 7, 8, 9, 10, 12, 16, 24, 40, 72, 136, 264};
+    static const char extra[16] = {     /* extra bits for length codes */
+        0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 5, 6, 7, 8};
+
+    /* set up decoding tables (once--might not be thread-safe) */
+    if (virgin) {
+        construct(&litcode, litlen, sizeof(litlen));
+        construct(&lencode, lenlen, sizeof(lenlen));
+        construct(&distcode, distlen, sizeof(distlen));
+        virgin = 0;
+    }
+
+    /* read header */
+    lit = bits(s, 8);
+    if (lit > 1) return -1;
+    dict = bits(s, 8);
+    if (dict < 4 || dict > 6) return -2;
+
+    /* decode literals and length/distance pairs */
+    do {
+        if (bits(s, 1)) {
+            /* get length */
+            symbol = decode(s, &lencode);
+            len = base[symbol] + bits(s, extra[symbol]);
+            if (len == 519) break;              /* end code */
+
+            /* get distance */
+            symbol = len == 2 ? 2 : dict;
+            dist = decode(s, &distcode) << symbol;
+            dist += bits(s, symbol);
+            dist++;
+            if (s->first && dist > s->next)
+                return -3;              /* distance too far back */
+
+            /* copy length bytes from distance bytes back */
+            do {
+                to = s->out + s->next;
+                from = to - dist;
+                copy = MAXWIN;
+                if (s->next < dist) {
+                    from += copy;
+                    copy = dist;
+                }
+                copy -= s->next;
+                if (copy > len) copy = len;
+                len -= copy;
+                s->next += copy;
+                do {
+                    *to++ = *from++;
+                } while (--copy);
+                if (s->next == MAXWIN) {
+                    if (s->outfun(s->outhow, s->out, s->next)) return 1;
+                    s->next = 0;
+                    s->first = 0;
+                }
+            } while (len != 0);
+        }
+        else {
+            /* get literal and write it */
+            symbol = lit ? decode(s, &litcode) : bits(s, 8);
+            s->out[s->next++] = symbol;
+            if (s->next == MAXWIN) {
+                if (s->outfun(s->outhow, s->out, s->next)) return 1;
+                s->next = 0;
+                s->first = 0;
+            }
+        }
+    } while (1);
+    return 0;
+}
+
+/* See comments in blast.h */
+int blast(blast_in infun, void *inhow, blast_out outfun, void *outhow)
+{
+    struct state s;             /* input/output state */
+    int err;                    /* return value */
+
+    /* initialize input state */
+    s.infun = infun;
+    s.inhow = inhow;
+    s.left = 0;
+    s.bitbuf = 0;
+    s.bitcnt = 0;
+
+    /* initialize output state */
+    s.outfun = outfun;
+    s.outhow = outhow;
+    s.next = 0;
+    s.first = 1;
+
+    /* return if bits() or decode() tries to read past available input */
+    if (setjmp(s.env) != 0)             /* if came back here via longjmp(), */
+        err = 2;                        /*  then skip decomp(), return error */
+    else
+        err = decomp(&s);               /* decompress */
+
+    /* write any leftover output and update the error code if needed */
+    if (err != 1 && s.next && s.outfun(s.outhow, s.out, s.next) && err == 0)
+        err = 1;
+    return err;
+}
+
+#ifdef TEST
+/* Example of how to use blast() */
+#include <stdio.h>
+#include <stdlib.h>
+
+#define CHUNK 16384
+
+local unsigned inf(void *how, unsigned char **buf)
+{
+    static unsigned char hold[CHUNK];
+
+    *buf = hold;
+    return fread(hold, 1, CHUNK, (FILE *)how);
+}
+
+local int outf(void *how, unsigned char *buf, unsigned len)
+{
+    return fwrite(buf, 1, len, (FILE *)how) != len;
+}
+
+/* Decompress a PKWare Compression Library stream from stdin to stdout */
+int main(void)
+{
+    int ret, n;
+
+    /* decompress to stdout */
+    ret = blast(inf, stdin, outf, stdout);
+    if (ret != 0) fprintf(stderr, "blast error: %d\n", ret);
+
+    /* see if there are any leftover bytes */
+    n = 0;
+    while (getchar() != EOF) n++;
+    if (n) fprintf(stderr, "blast warning: %d unused bytes of input\n", n);
+
+    /* return blast() error code */
+    return ret;
+}
+#endif

contrib/blast/blast.h

@@ -0,0 +1,71 @@
+/* blast.h -- interface for blast.c
+  Copyright (C) 2003 Mark Adler
+  version 1.1, 16 Feb 2003
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the author be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  Mark Adler    madler@alumni.caltech.edu
+ */
+
+
+/*
+ * blast() decompresses the PKWare Data Compression Library (DCL) compressed
+ * format.  It provides the same functionality as the explode() function in
+ * that library.  (Note: PKWare overused the "implode" verb, and the format
+ * used by their library implode() function is completely different and
+ * incompatible with the implode compression method supported by PKZIP.)
+ */
+
+
+typedef unsigned (*blast_in)(void *how, unsigned char **buf);
+typedef int (*blast_out)(void *how, unsigned char *buf, unsigned len);
+/* Definitions for input/output functions passed to blast().  See below for
+ * what the provided functions need to do.
+ */
+
+
+int blast(blast_in infun, void *inhow, blast_out outfun, void *outhow);
+/* Decompress input to output using the provided infun() and outfun() calls.
+ * On success, the return value of blast() is zero.  If there is an error in
+ * the source data, i.e. it is not in the proper format, then a negative value
+ * is returned.  If there is not enough input available or there is not enough
+ * output space, then a positive error is returned.
+ *
+ * The input function is invoked: len = infun(how, &buf), where buf is set by
+ * infun() to point to the input buffer, and infun() returns the number of
+ * available bytes there.  If infun() returns zero, then blast() returns with
+ * an input error.  (blast() only asks for input if it needs it.)  inhow is for
+ * use by the application to pass an input descriptor to infun(), if desired.
+ *
+ * The output function is invoked: err = outfun(how, buf, len), where the bytes
+ * to be written are buf[0..len-1].  If err is not zero, then blast() returns
+ * with an output error.  outfun() is always called with len <= 4096.  outhow
+ * is for use by the application to pass an output descriptor to outfun(), if
+ * desired.
+ *
+ * The return codes are:
+ *
+ *   2:  ran out of input before completing decompression
+ *   1:  output error before completing decompression
+ *   0:  successful decompression
+ *  -1:  literal flag not zero or one
+ *  -2:  dictionary size not in 4..6
+ *  -3:  distance is too far back
+ *
+ * At the bottom of blast.c is an example program that uses blast() that can be
+ * compiled to produce a command-line decompression filter by defining TEST.
+ */

contrib/blast/test.txt

@@ -0,0 +1 @@
+AIAIAIAIAIAIA

contrib/delphi/ZLib.pas

@@ -0,0 +1,557 @@
+{*******************************************************}
+{                                                       }
+{       Borland Delphi Supplemental Components          }
+{       ZLIB Data Compression Interface Unit            }
+{                                                       }
+{       Copyright (c) 1997,99 Borland Corporation       }
+{                                                       }
+{*******************************************************}
+
+{ Updated for zlib 1.2.x by Cosmin Truta <cosmint@cs.ubbcluj.ro> }
+
+unit ZLib;
+
+interface
+
+uses SysUtils, Classes;
+
+type
+  TAlloc = function (AppData: Pointer; Items, Size: Integer): Pointer; cdecl;
+  TFree = procedure (AppData, Block: Pointer); cdecl;
+
+  // Internal structure.  Ignore.
+  TZStreamRec = packed record
+    next_in: PChar;       // next input byte
+    avail_in: Integer;    // number of bytes available at next_in
+    total_in: Longint;    // total nb of input bytes read so far
+
+    next_out: PChar;      // next output byte should be put here
+    avail_out: Integer;   // remaining free space at next_out
+    total_out: Longint;   // total nb of bytes output so far
+
+    msg: PChar;           // last error message, NULL if no error
+    internal: Pointer;    // not visible by applications
+
+    zalloc: TAlloc;       // used to allocate the internal state
+    zfree: TFree;         // used to free the internal state
+    AppData: Pointer;     // private data object passed to zalloc and zfree
+
+    data_type: Integer;   // best guess about the data type: ascii or binary
+    adler: Longint;       // adler32 value of the uncompressed data
+    reserved: Longint;    // reserved for future use
+  end;
+
+  // Abstract ancestor class
+  TCustomZlibStream = class(TStream)
+  private
+    FStrm: TStream;
+    FStrmPos: Integer;
+    FOnProgress: TNotifyEvent;
+    FZRec: TZStreamRec;
+    FBuffer: array [Word] of Char;
+  protected
+    procedure Progress(Sender: TObject); dynamic;
+    property OnProgress: TNotifyEvent read FOnProgress write FOnProgress;
+    constructor Create(Strm: TStream);
+  end;
+
+{ TCompressionStream compresses data on the fly as data is written to it, and
+  stores the compressed data to another stream.
+
+  TCompressionStream is write-only and strictly sequential. Reading from the
+  stream will raise an exception. Using Seek to move the stream pointer
+  will raise an exception.
+
+  Output data is cached internally, written to the output stream only when
+  the internal output buffer is full.  All pending output data is flushed
+  when the stream is destroyed.
+
+  The Position property returns the number of uncompressed bytes of
+  data that have been written to the stream so far.
+
+  CompressionRate returns the on-the-fly percentage by which the original
+  data has been compressed:  (1 - (CompressedBytes / UncompressedBytes)) * 100
+  If raw data size = 100 and compressed data size = 25, the CompressionRate
+  is 75%
+
+  The OnProgress event is called each time the output buffer is filled and
+  written to the output stream.  This is useful for updating a progress
+  indicator when you are writing a large chunk of data to the compression
+  stream in a single call.}
+
+
+  TCompressionLevel = (clNone, clFastest, clDefault, clMax);
+
+  TCompressionStream = class(TCustomZlibStream)
+  private
+    function GetCompressionRate: Single;
+  public
+    constructor Create(CompressionLevel: TCompressionLevel; Dest: TStream);
+    destructor Destroy; override;
+    function Read(var Buffer; Count: Longint): Longint; override;
+    function Write(const Buffer; Count: Longint): Longint; override;
+    function Seek(Offset: Longint; Origin: Word): Longint; override;
+    property CompressionRate: Single read GetCompressionRate;
+    property OnProgress;
+  end;
+
+{ TDecompressionStream decompresses data on the fly as data is read from it.
+
+  Compressed data comes from a separate source stream.  TDecompressionStream
+  is read-only and unidirectional; you can seek forward in the stream, but not
+  backwards.  The special case of setting the stream position to zero is
+  allowed.  Seeking forward decompresses data until the requested position in
+  the uncompressed data has been reached.  Seeking backwards, seeking relative
+  to the end of the stream, requesting the size of the stream, and writing to
+  the stream will raise an exception.
+
+  The Position property returns the number of bytes of uncompressed data that
+  have been read from the stream so far.
+
+  The OnProgress event is called each time the internal input buffer of
+  compressed data is exhausted and the next block is read from the input stream.
+  This is useful for updating a progress indicator when you are reading a
+  large chunk of data from the decompression stream in a single call.}
+
+  TDecompressionStream = class(TCustomZlibStream)
+  public
+    constructor Create(Source: TStream);
+    destructor Destroy; override;
+    function Read(var Buffer; Count: Longint): Longint; override;
+    function Write(const Buffer; Count: Longint): Longint; override;
+    function Seek(Offset: Longint; Origin: Word): Longint; override;
+    property OnProgress;
+  end;
+
+
+
+{ CompressBuf compresses data, buffer to buffer, in one call.
+   In: InBuf = ptr to compressed data
+       InBytes = number of bytes in InBuf
+  Out: OutBuf = ptr to newly allocated buffer containing decompressed data
+       OutBytes = number of bytes in OutBuf   }
+procedure CompressBuf(const InBuf: Pointer; InBytes: Integer;
+                      out OutBuf: Pointer; out OutBytes: Integer);
+
+
+{ DecompressBuf decompresses data, buffer to buffer, in one call.
+   In: InBuf = ptr to compressed data
+       InBytes = number of bytes in InBuf
+       OutEstimate = zero, or est. size of the decompressed data
+  Out: OutBuf = ptr to newly allocated buffer containing decompressed data
+       OutBytes = number of bytes in OutBuf   }
+procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer;
+ OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer);
+
+{ DecompressToUserBuf decompresses data, buffer to buffer, in one call.
+   In: InBuf = ptr to compressed data
+       InBytes = number of bytes in InBuf
+  Out: OutBuf = ptr to user-allocated buffer to contain decompressed data
+       BufSize = number of bytes in OutBuf   }
+procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
+  const OutBuf: Pointer; BufSize: Integer);
+
+const
+  zlib_version = '1.2.5';
+
+type
+  EZlibError = class(Exception);
+  ECompressionError = class(EZlibError);
+  EDecompressionError = class(EZlibError);
+
+implementation
+
+uses ZLibConst;
+
+const
+  Z_NO_FLUSH      = 0;
+  Z_PARTIAL_FLUSH = 1;
+  Z_SYNC_FLUSH    = 2;
+  Z_FULL_FLUSH    = 3;
+  Z_FINISH        = 4;
+
+  Z_OK            = 0;
+  Z_STREAM_END    = 1;
+  Z_NEED_DICT     = 2;
+  Z_ERRNO         = (-1);
+  Z_STREAM_ERROR  = (-2);
+  Z_DATA_ERROR    = (-3);
+  Z_MEM_ERROR     = (-4);
+  Z_BUF_ERROR     = (-5);
+  Z_VERSION_ERROR = (-6);
+
+  Z_NO_COMPRESSION       =   0;
+  Z_BEST_SPEED           =   1;
+  Z_BEST_COMPRESSION     =   9;
+  Z_DEFAULT_COMPRESSION  = (-1);
+
+  Z_FILTERED            = 1;
+  Z_HUFFMAN_ONLY        = 2;
+  Z_RLE                 = 3;
+  Z_DEFAULT_STRATEGY    = 0;
+
+  Z_BINARY   = 0;
+  Z_ASCII    = 1;
+  Z_UNKNOWN  = 2;
+
+  Z_DEFLATED = 8;
+
+
+{$L adler32.obj}
+{$L compress.obj}
+{$L crc32.obj}
+{$L deflate.obj}
+{$L infback.obj}
+{$L inffast.obj}
+{$L inflate.obj}
+{$L inftrees.obj}
+{$L trees.obj}
+{$L uncompr.obj}
+{$L zutil.obj}
+
+procedure adler32; external;
+procedure compressBound; external;
+procedure crc32; external;
+procedure deflateInit2_; external;
+procedure deflateParams; external;
+
+function _malloc(Size: Integer): Pointer; cdecl;
+begin
+  Result := AllocMem(Size);
+end;
+
+procedure _free(Block: Pointer); cdecl;
+begin
+  FreeMem(Block);
+end;
+
+procedure _memset(P: Pointer; B: Byte; count: Integer); cdecl;
+begin
+  FillChar(P^, count, B);
+end;
+
+procedure _memcpy(dest, source: Pointer; count: Integer); cdecl;
+begin
+  Move(source^, dest^, count);
+end;
+
+
+
+// deflate compresses data
+function deflateInit_(var strm: TZStreamRec; level: Integer; version: PChar;
+  recsize: Integer): Integer; external;
+function deflate(var strm: TZStreamRec; flush: Integer): Integer; external;
+function deflateEnd(var strm: TZStreamRec): Integer; external;
+
+// inflate decompresses data
+function inflateInit_(var strm: TZStreamRec; version: PChar;
+  recsize: Integer): Integer; external;
+function inflate(var strm: TZStreamRec; flush: Integer): Integer; external;
+function inflateEnd(var strm: TZStreamRec): Integer; external;
+function inflateReset(var strm: TZStreamRec): Integer; external;
+
+
+function zlibAllocMem(AppData: Pointer; Items, Size: Integer): Pointer; cdecl;
+begin
+//  GetMem(Result, Items*Size);
+  Result := AllocMem(Items * Size);
+end;
+
+procedure zlibFreeMem(AppData, Block: Pointer); cdecl;
+begin
+  FreeMem(Block);
+end;
+
+{function zlibCheck(code: Integer): Integer;
+begin
+  Result := code;
+  if code < 0 then
+    raise EZlibError.Create('error');    //!!
+end;}
+
+function CCheck(code: Integer): Integer;
+begin
+  Result := code;
+  if code < 0 then
+    raise ECompressionError.Create('error'); //!!
+end;
+
+function DCheck(code: Integer): Integer;
+begin
+  Result := code;
+  if code < 0 then
+    raise EDecompressionError.Create('error');  //!!
+end;
+
+procedure CompressBuf(const InBuf: Pointer; InBytes: Integer;
+                      out OutBuf: Pointer; out OutBytes: Integer);
+var
+  strm: TZStreamRec;
+  P: Pointer;
+begin
+  FillChar(strm, sizeof(strm), 0);
+  strm.zalloc := zlibAllocMem;
+  strm.zfree := zlibFreeMem;
+  OutBytes := ((InBytes + (InBytes div 10) + 12) + 255) and not 255;
+  GetMem(OutBuf, OutBytes);
+  try
+    strm.next_in := InBuf;
+    strm.avail_in := InBytes;
+    strm.next_out := OutBuf;
+    strm.avail_out := OutBytes;
+    CCheck(deflateInit_(strm, Z_BEST_COMPRESSION, zlib_version, sizeof(strm)));
+    try
+      while CCheck(deflate(strm, Z_FINISH)) <> Z_STREAM_END do
+      begin
+        P := OutBuf;
+        Inc(OutBytes, 256);
+        ReallocMem(OutBuf, OutBytes);
+        strm.next_out := PChar(Integer(OutBuf) + (Integer(strm.next_out) - Integer(P)));
+        strm.avail_out := 256;
+      end;
+    finally
+      CCheck(deflateEnd(strm));
+    end;
+    ReallocMem(OutBuf, strm.total_out);
+    OutBytes := strm.total_out;
+  except
+    FreeMem(OutBuf);
+    raise
+  end;
+end;
+
+
+procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer;
+  OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer);
+var
+  strm: TZStreamRec;
+  P: Pointer;
+  BufInc: Integer;
+begin
+  FillChar(strm, sizeof(strm), 0);
+  strm.zalloc := zlibAllocMem;
+  strm.zfree := zlibFreeMem;
+  BufInc := (InBytes + 255) and not 255;
+  if OutEstimate = 0 then
+    OutBytes := BufInc
+  else
+    OutBytes := OutEstimate;
+  GetMem(OutBuf, OutBytes);
+  try
+    strm.next_in := InBuf;
+    strm.avail_in := InBytes;
+    strm.next_out := OutBuf;
+    strm.avail_out := OutBytes;
+    DCheck(inflateInit_(strm, zlib_version, sizeof(strm)));
+    try
+      while DCheck(inflate(strm, Z_NO_FLUSH)) <> Z_STREAM_END do
+      begin
+        P := OutBuf;
+        Inc(OutBytes, BufInc);
+        ReallocMem(OutBuf, OutBytes);
+        strm.next_out := PChar(Integer(OutBuf) + (Integer(strm.next_out) - Integer(P)));
+        strm.avail_out := BufInc;
+      end;
+    finally
+      DCheck(inflateEnd(strm));
+    end;
+    ReallocMem(OutBuf, strm.total_out);
+    OutBytes := strm.total_out;
+  except
+    FreeMem(OutBuf);
+    raise
+  end;
+end;
+
+procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
+  const OutBuf: Pointer; BufSize: Integer);
+var
+  strm: TZStreamRec;
+begin
+  FillChar(strm, sizeof(strm), 0);
+  strm.zalloc := zlibAllocMem;
+  strm.zfree := zlibFreeMem;
+  strm.next_in := InBuf;
+  strm.avail_in := InBytes;
+  strm.next_out := OutBuf;
+  strm.avail_out := BufSize;
+  DCheck(inflateInit_(strm, zlib_version, sizeof(strm)));
+  try
+    if DCheck(inflate(strm, Z_FINISH)) <> Z_STREAM_END then
+      raise EZlibError.CreateRes(@sTargetBufferTooSmall);
+  finally
+    DCheck(inflateEnd(strm));
+  end;
+end;
+
+// TCustomZlibStream
+
+constructor TCustomZLibStream.Create(Strm: TStream);
+begin
+  inherited Create;
+  FStrm := Strm;
+  FStrmPos := Strm.Position;
+  FZRec.zalloc := zlibAllocMem;
+  FZRec.zfree := zlibFreeMem;
+end;
+
+procedure TCustomZLibStream.Progress(Sender: TObject);
+begin
+  if Assigned(FOnProgress) then FOnProgress(Sender);
+end;
+
+
+// TCompressionStream
+
+constructor TCompressionStream.Create(CompressionLevel: TCompressionLevel;
+  Dest: TStream);
+const
+  Levels: array [TCompressionLevel] of ShortInt =
+    (Z_NO_COMPRESSION, Z_BEST_SPEED, Z_DEFAULT_COMPRESSION, Z_BEST_COMPRESSION);
+begin
+  inherited Create(Dest);
+  FZRec.next_out := FBuffer;
+  FZRec.avail_out := sizeof(FBuffer);
+  CCheck(deflateInit_(FZRec, Levels[CompressionLevel], zlib_version, sizeof(FZRec)));
+end;
+
+destructor TCompressionStream.Destroy;
+begin
+  FZRec.next_in := nil;
+  FZRec.avail_in := 0;
+  try
+    if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
+    while (CCheck(deflate(FZRec, Z_FINISH)) <> Z_STREAM_END)
+      and (FZRec.avail_out = 0) do
+    begin
+      FStrm.WriteBuffer(FBuffer, sizeof(FBuffer));
+      FZRec.next_out := FBuffer;
+      FZRec.avail_out := sizeof(FBuffer);
+    end;
+    if FZRec.avail_out < sizeof(FBuffer) then
+      FStrm.WriteBuffer(FBuffer, sizeof(FBuffer) - FZRec.avail_out);
+  finally
+    deflateEnd(FZRec);
+  end;
+  inherited Destroy;
+end;
+
+function TCompressionStream.Read(var Buffer; Count: Longint): Longint;
+begin
+  raise ECompressionError.CreateRes(@sInvalidStreamOp);
+end;
+
+function TCompressionStream.Write(const Buffer; Count: Longint): Longint;
+begin
+  FZRec.next_in := @Buffer;
+  FZRec.avail_in := Count;
+  if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
+  while (FZRec.avail_in > 0) do
+  begin
+    CCheck(deflate(FZRec, 0));
+    if FZRec.avail_out = 0 then
+    begin
+      FStrm.WriteBuffer(FBuffer, sizeof(FBuffer));
+      FZRec.next_out := FBuffer;
+      FZRec.avail_out := sizeof(FBuffer);
+      FStrmPos := FStrm.Position;
+      Progress(Self);
+    end;
+  end;
+  Result := Count;
+end;
+
+function TCompressionStream.Seek(Offset: Longint; Origin: Word): Longint;
+begin
+  if (Offset = 0) and (Origin = soFromCurrent) then
+    Result := FZRec.total_in
+  else
+    raise ECompressionError.CreateRes(@sInvalidStreamOp);
+end;
+
+function TCompressionStream.GetCompressionRate: Single;
+begin
+  if FZRec.total_in = 0 then
+    Result := 0
+  else
+    Result := (1.0 - (FZRec.total_out / FZRec.total_in)) * 100.0;
+end;
+
+
+// TDecompressionStream
+
+constructor TDecompressionStream.Create(Source: TStream);
+begin
+  inherited Create(Source);
+  FZRec.next_in := FBuffer;
+  FZRec.avail_in := 0;
+  DCheck(inflateInit_(FZRec, zlib_version, sizeof(FZRec)));
+end;
+
+destructor TDecompressionStream.Destroy;
+begin
+  FStrm.Seek(-FZRec.avail_in, 1);
+  inflateEnd(FZRec);
+  inherited Destroy;
+end;
+
+function TDecompressionStream.Read(var Buffer; Count: Longint): Longint;
+begin
+  FZRec.next_out := @Buffer;
+  FZRec.avail_out := Count;
+  if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
+  while (FZRec.avail_out > 0) do
+  begin
+    if FZRec.avail_in = 0 then
+    begin
+      FZRec.avail_in := FStrm.Read(FBuffer, sizeof(FBuffer));
+      if FZRec.avail_in = 0 then
+      begin
+        Result := Count - FZRec.avail_out;
+        Exit;
+      end;
+      FZRec.next_in := FBuffer;
+      FStrmPos := FStrm.Position;
+      Progress(Self);
+    end;
+    CCheck(inflate(FZRec, 0));
+  end;
+  Result := Count;
+end;
+
+function TDecompressionStream.Write(const Buffer; Count: Longint): Longint;
+begin
+  raise EDecompressionError.CreateRes(@sInvalidStreamOp);
+end;
+
+function TDecompressionStream.Seek(Offset: Longint; Origin: Word): Longint;
+var
+  I: Integer;
+  Buf: array [0..4095] of Char;
+begin
+  if (Offset = 0) and (Origin = soFromBeginning) then
+  begin
+    DCheck(inflateReset(FZRec));
+    FZRec.next_in := FBuffer;
+    FZRec.avail_in := 0;
+    FStrm.Position := 0;
+    FStrmPos := 0;
+  end
+  else if ( (Offset >= 0) and (Origin = soFromCurrent)) or
+          ( ((Offset - FZRec.total_out) > 0) and (Origin = soFromBeginning)) then
+  begin
+    if Origin = soFromBeginning then Dec(Offset, FZRec.total_out);
+    if Offset > 0 then
+    begin
+      for I := 1 to Offset div sizeof(Buf) do
+        ReadBuffer(Buf, sizeof(Buf));
+      ReadBuffer(Buf, Offset mod sizeof(Buf));
+    end;
+  end
+  else
+    raise EDecompressionError.CreateRes(@sInvalidStreamOp);
+  Result := FZRec.total_out;
+end;
+
+
+end.

contrib/delphi/ZLibConst.pas

@@ -0,0 +1,11 @@
+unit ZLibConst;
+
+interface
+
+resourcestring
+  sTargetBufferTooSmall = 'ZLib error: target buffer may be too small';
+  sInvalidStreamOp = 'Invalid stream operation';
+
+implementation
+
+end.

contrib/delphi/readme.txt

@@ -0,0 +1,76 @@
+
+Overview
+========
+
+This directory contains an update to the ZLib interface unit,
+distributed by Borland as a Delphi supplemental component.
+
+The original ZLib unit is Copyright (c) 1997,99 Borland Corp.,
+and is based on zlib version 1.0.4.  There are a series of bugs
+and security problems associated with that old zlib version, and
+we recommend the users to update their ZLib unit.
+
+
+Summary of modifications
+========================
+
+- Improved makefile, adapted to zlib version 1.2.1.
+
+- Some field types from TZStreamRec are changed from Integer to
+  Longint, for consistency with the zlib.h header, and for 64-bit
+  readiness.
+
+- The zlib_version constant is updated.
+
+- The new Z_RLE strategy has its corresponding symbolic constant.
+
+- The allocation and deallocation functions and function types
+  (TAlloc, TFree, zlibAllocMem and zlibFreeMem) are now cdecl,
+  and _malloc and _free are added as C RTL stubs.  As a result,
+  the original C sources of zlib can be compiled out of the box,
+  and linked to the ZLib unit.
+
+
+Suggestions for improvements
+============================
+
+Currently, the ZLib unit provides only a limited wrapper around
+the zlib library, and much of the original zlib functionality is
+missing.  Handling compressed file formats like ZIP/GZIP or PNG
+cannot be implemented without having this functionality.
+Applications that handle these formats are either using their own,
+duplicated code, or not using the ZLib unit at all.
+
+Here are a few suggestions:
+
+- Checksum class wrappers around adler32() and crc32(), similar
+  to the Java classes that implement the java.util.zip.Checksum
+  interface.
+
+- The ability to read and write raw deflate streams, without the
+  zlib stream header and trailer.  Raw deflate streams are used
+  in the ZIP file format.
+
+- The ability to read and write gzip streams, used in the GZIP
+  file format, and normally produced by the gzip program.
+
+- The ability to select a different compression strategy, useful
+  to PNG and MNG image compression, and to multimedia compression
+  in general.  Besides the compression level
+
+    TCompressionLevel = (clNone, clFastest, clDefault, clMax);
+
+  which, in fact, could have used the 'z' prefix and avoided
+  TColor-like symbols
+
+    TCompressionLevel = (zcNone, zcFastest, zcDefault, zcMax);
+
+  there could be a compression strategy
+
+    TCompressionStrategy = (zsDefault, zsFiltered, zsHuffmanOnly, zsRle);
+
+- ZIP and GZIP stream handling via TStreams.
+
+
+--
+Cosmin Truta <cosmint@cs.ubbcluj.ro>

contrib/delphi/zlibd32.mak

@@ -0,0 +1,99 @@
+# Makefile for zlib
+# For use with Delphi and C++ Builder under Win32
+# Updated for zlib 1.2.x by Cosmin Truta
+
+# ------------ Borland C++ ------------
+
+# This project uses the Delphi (fastcall/register) calling convention:
+LOC = -DZEXPORT=__fastcall -DZEXPORTVA=__cdecl
+
+CC = bcc32
+LD = bcc32
+AR = tlib
+# do not use "-pr" in CFLAGS
+CFLAGS = -a -d -k- -O2 $(LOC)
+LDFLAGS =
+
+
+# variables
+ZLIB_LIB = zlib.lib
+
+OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzclose.obj gzlib.obj gzread.obj
+OBJ2 = gzwrite.obj infback.obj inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
+OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzclose.obj+gzlib.obj+gzread.obj
+OBJP2 = +gzwrite.obj+infback.obj+inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj
+
+
+# targets
+all: $(ZLIB_LIB) example.exe minigzip.exe
+
+.c.obj:
+	$(CC) -c $(CFLAGS) $*.c
+
+adler32.obj: adler32.c zlib.h zconf.h
+
+compress.obj: compress.c zlib.h zconf.h
+
+crc32.obj: crc32.c zlib.h zconf.h crc32.h
+
+deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+
+gzclose.obj: gzclose.c zlib.h zconf.h gzguts.h
+
+gzlib.obj: gzlib.c zlib.h zconf.h gzguts.h
+
+gzread.obj: gzread.c zlib.h zconf.h gzguts.h
+
+gzwrite.obj: gzwrite.c zlib.h zconf.h gzguts.h
+
+infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h
+
+inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+
+trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h
+
+uncompr.obj: uncompr.c zlib.h zconf.h
+
+zutil.obj: zutil.c zutil.h zlib.h zconf.h
+
+example.obj: example.c zlib.h zconf.h
+
+minigzip.obj: minigzip.c zlib.h zconf.h
+
+
+# For the sake of the old Borland make,
+# the command line is cut to fit in the MS-DOS 128 byte limit:
+$(ZLIB_LIB): $(OBJ1) $(OBJ2)
+	-del $(ZLIB_LIB)
+	$(AR) $(ZLIB_LIB) $(OBJP1)
+	$(AR) $(ZLIB_LIB) $(OBJP2)
+
+
+# testing
+test: example.exe minigzip.exe
+	example
+	echo hello world | minigzip | minigzip -d
+
+example.exe: example.obj $(ZLIB_LIB)
+	$(LD) $(LDFLAGS) example.obj $(ZLIB_LIB)
+
+minigzip.exe: minigzip.obj $(ZLIB_LIB)
+	$(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB)
+
+
+# cleanup
+clean:
+	-del *.obj
+	-del *.exe
+	-del *.lib
+	-del *.tds
+	-del zlib.bak
+	-del foo.gz
+

contrib/dotzlib/DotZLib.build

@@ -0,0 +1,33 @@
+<?xml version="1.0" encoding="utf-8" ?>
+<project name="DotZLib" default="build" basedir="./DotZLib">
+	<description>A .Net wrapper library around ZLib1.dll</description>
+
+	<property name="nunit.location" value="c:/program files/NUnit V2.1/bin" />
+	<property name="build.root" value="bin" />
+
+	<property name="debug" value="true" />
+	<property name="nunit" value="true" />
+
+	<property name="build.folder" value="${build.root}/debug/" if="${debug}" />
+	<property name="build.folder" value="${build.root}/release/" unless="${debug}" />
+
+	<target name="clean" description="Remove all generated files">
+		<delete dir="${build.root}" failonerror="false" />
+	</target>
+
+	<target name="build" description="compiles the source code">
+
+		<mkdir dir="${build.folder}" />
+		<csc target="library" output="${build.folder}DotZLib.dll" debug="${debug}">
+			<references basedir="${nunit.location}">
+				<includes if="${nunit}" name="nunit.framework.dll" />
+			</references>
+			<sources>
+				<includes name="*.cs" />
+				<excludes name="UnitTests.cs" unless="${nunit}" />
+			</sources>
+			<arg value="/d:nunit" if="${nunit}" />
+		</csc>
+	</target>
+
+</project>

contrib/dotzlib/DotZLib.sln

@@ -0,0 +1,21 @@
+Microsoft Visual Studio Solution File, Format Version 8.00
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "DotZLib", "DotZLib\DotZLib.csproj", "{BB1EE0B1-1808-46CB-B786-949D91117FC5}"
+	ProjectSection(ProjectDependencies) = postProject
+	EndProjectSection
+EndProject
+Global
+	GlobalSection(SolutionConfiguration) = preSolution
+		Debug = Debug
+		Release = Release
+	EndGlobalSection
+	GlobalSection(ProjectConfiguration) = postSolution
+		{BB1EE0B1-1808-46CB-B786-949D91117FC5}.Debug.ActiveCfg = Debug|.NET
+		{BB1EE0B1-1808-46CB-B786-949D91117FC5}.Debug.Build.0 = Debug|.NET
+		{BB1EE0B1-1808-46CB-B786-949D91117FC5}.Release.ActiveCfg = Release|.NET
+		{BB1EE0B1-1808-46CB-B786-949D91117FC5}.Release.Build.0 = Release|.NET
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+	EndGlobalSection
+	GlobalSection(ExtensibilityAddIns) = postSolution
+	EndGlobalSection
+EndGlobal

contrib/dotzlib/DotZLib/AssemblyInfo.cs

@@ -0,0 +1,58 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("DotZLib")]
+[assembly: AssemblyDescription(".Net bindings for ZLib compression dll 1.2.x")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("Henrik Ravn")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("(c) 2004 by Henrik Ravn")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.0.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing.
+//
+// Notes:
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+[assembly: AssemblyKeyFile("")]
+[assembly: AssemblyKeyName("")]

contrib/dotzlib/DotZLib/ChecksumImpl.cs

@@ -0,0 +1,202 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Runtime.InteropServices;
+using System.Text;
+
+
+namespace DotZLib
+{
+    #region ChecksumGeneratorBase
+    /// <summary>
+    /// Implements the common functionality needed for all <see cref="ChecksumGenerator"/>s
+    /// </summary>
+    /// <example></example>
+    public abstract class ChecksumGeneratorBase : ChecksumGenerator
+    {
+        /// <summary>
+        /// The value of the current checksum
+        /// </summary>
+        protected uint _current;
+
+        /// <summary>
+        /// Initializes a new instance of the checksum generator base - the current checksum is
+        /// set to zero
+        /// </summary>
+        public ChecksumGeneratorBase()
+        {
+            _current = 0;
+        }
+
+        /// <summary>
+        /// Initializes a new instance of the checksum generator basewith a specified value
+        /// </summary>
+        /// <param name="initialValue">The value to set the current checksum to</param>
+        public ChecksumGeneratorBase(uint initialValue)
+        {
+            _current = initialValue;
+        }
+
+        /// <summary>
+        /// Resets the current checksum to zero
+        /// </summary>
+        public void Reset() { _current = 0; }
+
+        /// <summary>
+        /// Gets the current checksum value
+        /// </summary>
+        public uint Value { get { return _current; } }
+
+        /// <summary>
+        /// Updates the current checksum with part of an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        /// <param name="offset">Where in <c>data</c> to start updating</param>
+        /// <param name="count">The number of bytes from <c>data</c> to use</param>
+        /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+        /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>
+        /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+        /// <remarks>All the other <c>Update</c> methods are implmeneted in terms of this one.
+        /// This is therefore the only method a derived class has to implement</remarks>
+        public abstract void Update(byte[] data, int offset, int count);
+
+        /// <summary>
+        /// Updates the current checksum with an array of bytes.
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        public void Update(byte[] data)
+        {
+            Update(data, 0, data.Length);
+        }
+
+        /// <summary>
+        /// Updates the current checksum with the data from a string
+        /// </summary>
+        /// <param name="data">The string to update the checksum with</param>
+        /// <remarks>The characters in the string are converted by the UTF-8 encoding</remarks>
+        public void Update(string data)
+        {
+			Update(Encoding.UTF8.GetBytes(data));
+        }
+
+        /// <summary>
+        /// Updates the current checksum with the data from a string, using a specific encoding
+        /// </summary>
+        /// <param name="data">The string to update the checksum with</param>
+        /// <param name="encoding">The encoding to use</param>
+        public void Update(string data, Encoding encoding)
+        {
+            Update(encoding.GetBytes(data));
+        }
+
+    }
+    #endregion
+
+    #region CRC32
+    /// <summary>
+    /// Implements a CRC32 checksum generator
+    /// </summary>
+    public sealed class CRC32Checksum : ChecksumGeneratorBase
+    {
+        #region DLL imports
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern uint crc32(uint crc, int data, uint length);
+
+        #endregion
+
+        /// <summary>
+        /// Initializes a new instance of the CRC32 checksum generator
+        /// </summary>
+        public CRC32Checksum() : base() {}
+
+        /// <summary>
+        /// Initializes a new instance of the CRC32 checksum generator with a specified value
+        /// </summary>
+        /// <param name="initialValue">The value to set the current checksum to</param>
+        public CRC32Checksum(uint initialValue) : base(initialValue) {}
+
+        /// <summary>
+        /// Updates the current checksum with part of an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        /// <param name="offset">Where in <c>data</c> to start updating</param>
+        /// <param name="count">The number of bytes from <c>data</c> to use</param>
+        /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+        /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>
+        /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+        public override void Update(byte[] data, int offset, int count)
+        {
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > data.Length) throw new ArgumentException();
+            GCHandle hData = GCHandle.Alloc(data, GCHandleType.Pinned);
+            try
+            {
+                _current = crc32(_current, hData.AddrOfPinnedObject().ToInt32()+offset, (uint)count);
+            }
+            finally
+            {
+                hData.Free();
+            }
+        }
+
+    }
+    #endregion
+
+    #region Adler
+    /// <summary>
+    /// Implements a checksum generator that computes the Adler checksum on data
+    /// </summary>
+    public sealed class AdlerChecksum : ChecksumGeneratorBase
+    {
+        #region DLL imports
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern uint adler32(uint adler, int data, uint length);
+
+        #endregion
+
+        /// <summary>
+        /// Initializes a new instance of the Adler checksum generator
+        /// </summary>
+        public AdlerChecksum() : base() {}
+
+        /// <summary>
+        /// Initializes a new instance of the Adler checksum generator with a specified value
+        /// </summary>
+        /// <param name="initialValue">The value to set the current checksum to</param>
+        public AdlerChecksum(uint initialValue) : base(initialValue) {}
+
+        /// <summary>
+        /// Updates the current checksum with part of an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        /// <param name="offset">Where in <c>data</c> to start updating</param>
+        /// <param name="count">The number of bytes from <c>data</c> to use</param>
+        /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+        /// <exception cref="NullReferenceException"><c>data</c> is a null reference</exception>
+        /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+        public override void Update(byte[] data, int offset, int count)
+        {
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > data.Length) throw new ArgumentException();
+            GCHandle hData = GCHandle.Alloc(data, GCHandleType.Pinned);
+            try
+            {
+                _current = adler32(_current, hData.AddrOfPinnedObject().ToInt32()+offset, (uint)count);
+            }
+            finally
+            {
+                hData.Free();
+            }
+        }
+
+    }
+    #endregion
+
+}

contrib/dotzlib/DotZLib/CircularBuffer.cs

@@ -0,0 +1,83 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Diagnostics;
+
+namespace DotZLib
+{
+
+	/// <summary>
+	/// This class implements a circular buffer
+	/// </summary>
+	internal class CircularBuffer
+	{
+        #region Private data
+        private int _capacity;
+        private int _head;
+        private int _tail;
+        private int _size;
+        private byte[] _buffer;
+        #endregion
+
+        public CircularBuffer(int capacity)
+        {
+            Debug.Assert( capacity > 0 );
+            _buffer = new byte[capacity];
+            _capacity = capacity;
+            _head = 0;
+            _tail = 0;
+            _size = 0;
+        }
+
+        public int Size { get { return _size; } }
+
+        public int Put(byte[] source, int offset, int count)
+        {
+            Debug.Assert( count > 0 );
+            int trueCount = Math.Min(count, _capacity - Size);
+            for (int i = 0; i < trueCount; ++i)
+                _buffer[(_tail+i) % _capacity] = source[offset+i];
+            _tail += trueCount;
+            _tail %= _capacity;
+            _size += trueCount;
+            return trueCount;
+        }
+
+        public bool Put(byte b)
+        {
+            if (Size == _capacity) // no room
+                return false;
+            _buffer[_tail++] = b;
+            _tail %= _capacity;
+            ++_size;
+            return true;
+        }
+
+        public int Get(byte[] destination, int offset, int count)
+        {
+            int trueCount = Math.Min(count,Size);
+            for (int i = 0; i < trueCount; ++i)
+                destination[offset + i] = _buffer[(_head+i) % _capacity];
+            _head += trueCount;
+            _head %= _capacity;
+            _size -= trueCount;
+            return trueCount;
+        }
+
+        public int Get()
+        {
+            if (Size == 0)
+                return -1;
+
+            int result = (int)_buffer[_head++ % _capacity];
+            --_size;
+            return result;
+        }
+
+    }
+}

contrib/dotzlib/DotZLib/CodecBase.cs

@@ -0,0 +1,198 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+	/// <summary>
+	/// Implements the common functionality needed for all <see cref="Codec"/>s
+	/// </summary>
+	public abstract class CodecBase : Codec, IDisposable
+	{
+
+        #region Data members
+
+        /// <summary>
+        /// Instance of the internal zlib buffer structure that is
+        /// passed to all functions in the zlib dll
+        /// </summary>
+        internal ZStream _ztream = new ZStream();
+
+        /// <summary>
+        /// True if the object instance has been disposed, false otherwise
+        /// </summary>
+        protected bool _isDisposed = false;
+
+        /// <summary>
+        /// The size of the internal buffers
+        /// </summary>
+        protected const int kBufferSize = 16384;
+
+        private byte[] _outBuffer = new byte[kBufferSize];
+        private byte[] _inBuffer = new byte[kBufferSize];
+
+        private GCHandle _hInput;
+        private GCHandle _hOutput;
+
+        private uint _checksum = 0;
+
+        #endregion
+
+        /// <summary>
+        /// Initializes a new instance of the <c>CodeBase</c> class.
+        /// </summary>
+		public CodecBase()
+		{
+            try
+            {
+                _hInput = GCHandle.Alloc(_inBuffer, GCHandleType.Pinned);
+                _hOutput = GCHandle.Alloc(_outBuffer, GCHandleType.Pinned);
+            }
+            catch (Exception)
+            {
+                CleanUp(false);
+                throw;
+            }
+        }
+
+
+        #region Codec Members
+
+        /// <summary>
+        /// Occurs when more processed data are available.
+        /// </summary>
+        public event DataAvailableHandler DataAvailable;
+
+        /// <summary>
+        /// Fires the <see cref="DataAvailable"/> event
+        /// </summary>
+        protected void OnDataAvailable()
+        {
+            if (_ztream.total_out > 0)
+            {
+                if (DataAvailable != null)
+                    DataAvailable( _outBuffer, 0, (int)_ztream.total_out);
+                resetOutput();
+            }
+        }
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        public void Add(byte[] data)
+        {
+            Add(data,0,data.Length);
+        }
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+        /// <param name="count">The number of bytes to add</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        /// <remarks>This must be implemented by a derived class</remarks>
+        public abstract void Add(byte[] data, int offset, int count);
+
+        /// <summary>
+        /// Finishes up any pending data that needs to be processed and handled.
+        /// </summary>
+        /// <remarks>This must be implemented by a derived class</remarks>
+        public abstract void Finish();
+
+        /// <summary>
+        /// Gets the checksum of the data that has been added so far
+        /// </summary>
+        public uint Checksum { get { return _checksum; } }
+
+        #endregion
+
+        #region Destructor & IDisposable stuff
+
+        /// <summary>
+        /// Destroys this instance
+        /// </summary>
+        ~CodecBase()
+        {
+            CleanUp(false);
+        }
+
+        /// <summary>
+        /// Releases any unmanaged resources and calls the <see cref="CleanUp()"/> method of the derived class
+        /// </summary>
+        public void Dispose()
+        {
+            CleanUp(true);
+        }
+
+        /// <summary>
+        /// Performs any codec specific cleanup
+        /// </summary>
+        /// <remarks>This must be implemented by a derived class</remarks>
+        protected abstract void CleanUp();
+
+        // performs the release of the handles and calls the dereived CleanUp()
+        private void CleanUp(bool isDisposing)
+        {
+            if (!_isDisposed)
+            {
+                CleanUp();
+                if (_hInput.IsAllocated)
+                    _hInput.Free();
+                if (_hOutput.IsAllocated)
+                    _hOutput.Free();
+
+                _isDisposed = true;
+            }
+        }
+
+
+        #endregion
+
+        #region Helper methods
+
+        /// <summary>
+        /// Copies a number of bytes to the internal codec buffer - ready for proccesing
+        /// </summary>
+        /// <param name="data">The byte array that contains the data to copy</param>
+        /// <param name="startIndex">The index of the first byte to copy</param>
+        /// <param name="count">The number of bytes to copy from <c>data</c></param>
+        protected void copyInput(byte[] data, int startIndex, int count)
+        {
+            Array.Copy(data, startIndex, _inBuffer,0, count);
+            _ztream.next_in = _hInput.AddrOfPinnedObject();
+            _ztream.total_in = 0;
+            _ztream.avail_in = (uint)count;
+
+        }
+
+        /// <summary>
+        /// Resets the internal output buffers to a known state - ready for processing
+        /// </summary>
+        protected void resetOutput()
+        {
+            _ztream.total_out = 0;
+            _ztream.avail_out = kBufferSize;
+            _ztream.next_out = _hOutput.AddrOfPinnedObject();
+        }
+
+        /// <summary>
+        /// Updates the running checksum property
+        /// </summary>
+        /// <param name="newSum">The new checksum value</param>
+        protected void setChecksum(uint newSum)
+        {
+            _checksum = newSum;
+        }
+        #endregion
+
+    }
+}

contrib/dotzlib/DotZLib/Deflater.cs

@@ -0,0 +1,106 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Diagnostics;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+
+    /// <summary>
+    /// Implements a data compressor, using the deflate algorithm in the ZLib dll
+    /// </summary>
+	public sealed class Deflater : CodecBase
+	{
+        #region Dll imports
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)]
+        private static extern int deflateInit_(ref ZStream sz, int level, string vs, int size);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int deflate(ref ZStream sz, int flush);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int deflateReset(ref ZStream sz);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int deflateEnd(ref ZStream sz);
+        #endregion
+
+        /// <summary>
+        /// Constructs an new instance of the <c>Deflater</c>
+        /// </summary>
+        /// <param name="level">The compression level to use for this <c>Deflater</c></param>
+		public Deflater(CompressLevel level) : base()
+		{
+            int retval = deflateInit_(ref _ztream, (int)level, Info.Version, Marshal.SizeOf(_ztream));
+            if (retval != 0)
+                throw new ZLibException(retval, "Could not initialize deflater");
+
+            resetOutput();
+		}
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+        /// <param name="count">The number of bytes to add</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        public override void Add(byte[] data, int offset, int count)
+        {
+            if (data == null) throw new ArgumentNullException();
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > data.Length) throw new ArgumentException();
+
+            int total = count;
+            int inputIndex = offset;
+            int err = 0;
+
+            while (err >= 0 && inputIndex < total)
+            {
+                copyInput(data, inputIndex, Math.Min(total - inputIndex, kBufferSize));
+                while (err >= 0 && _ztream.avail_in > 0)
+                {
+                    err = deflate(ref _ztream, (int)FlushTypes.None);
+                    if (err == 0)
+                        while (_ztream.avail_out == 0)
+                        {
+                            OnDataAvailable();
+                            err = deflate(ref _ztream, (int)FlushTypes.None);
+                        }
+                    inputIndex += (int)_ztream.total_in;
+                }
+            }
+            setChecksum( _ztream.adler );
+        }
+
+
+        /// <summary>
+        /// Finishes up any pending data that needs to be processed and handled.
+        /// </summary>
+        public override void Finish()
+        {
+            int err;
+            do
+            {
+                err = deflate(ref _ztream, (int)FlushTypes.Finish);
+                OnDataAvailable();
+            }
+            while (err == 0);
+            setChecksum( _ztream.adler );
+            deflateReset(ref _ztream);
+            resetOutput();
+        }
+
+        /// <summary>
+        /// Closes the internal zlib deflate stream
+        /// </summary>
+        protected override void CleanUp() { deflateEnd(ref _ztream); }
+
+    }
+}

contrib/dotzlib/DotZLib/DotZLib.cs

@@ -0,0 +1,288 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.IO;
+using System.Runtime.InteropServices;
+using System.Text;
+
+
+namespace DotZLib
+{
+
+    #region Internal types
+
+    /// <summary>
+    /// Defines constants for the various flush types used with zlib
+    /// </summary>
+    internal enum FlushTypes
+    {
+        None,  Partial,  Sync,  Full,  Finish,  Block
+    }
+
+    #region ZStream structure
+    // internal mapping of the zlib zstream structure for marshalling
+    [StructLayoutAttribute(LayoutKind.Sequential, Pack=4, Size=0, CharSet=CharSet.Ansi)]
+    internal struct ZStream
+    {
+        public IntPtr next_in;
+        public uint avail_in;
+        public uint total_in;
+
+        public IntPtr next_out;
+        public uint avail_out;
+        public uint total_out;
+
+        [MarshalAs(UnmanagedType.LPStr)]
+        string msg;
+        uint state;
+
+        uint zalloc;
+        uint zfree;
+        uint opaque;
+
+        int data_type;
+        public uint adler;
+        uint reserved;
+    }
+
+    #endregion
+
+    #endregion
+
+    #region Public enums
+    /// <summary>
+    /// Defines constants for the available compression levels in zlib
+    /// </summary>
+    public enum CompressLevel : int
+    {
+        /// <summary>
+        /// The default compression level with a reasonable compromise between compression and speed
+        /// </summary>
+        Default = -1,
+        /// <summary>
+        /// No compression at all. The data are passed straight through.
+        /// </summary>
+        None = 0,
+        /// <summary>
+        /// The maximum compression rate available.
+        /// </summary>
+        Best = 9,
+        /// <summary>
+        /// The fastest available compression level.
+        /// </summary>
+        Fastest = 1
+    }
+    #endregion
+
+    #region Exception classes
+    /// <summary>
+    /// The exception that is thrown when an error occurs on the zlib dll
+    /// </summary>
+    public class ZLibException : ApplicationException
+    {
+        /// <summary>
+        /// Initializes a new instance of the <see cref="ZLibException"/> class with a specified
+        /// error message and error code
+        /// </summary>
+        /// <param name="errorCode">The zlib error code that caused the exception</param>
+        /// <param name="msg">A message that (hopefully) describes the error</param>
+        public ZLibException(int errorCode, string msg) : base(String.Format("ZLib error {0} {1}", errorCode, msg))
+        {
+        }
+
+        /// <summary>
+        /// Initializes a new instance of the <see cref="ZLibException"/> class with a specified
+        /// error code
+        /// </summary>
+        /// <param name="errorCode">The zlib error code that caused the exception</param>
+        public ZLibException(int errorCode) : base(String.Format("ZLib error {0}", errorCode))
+        {
+        }
+    }
+    #endregion
+
+    #region Interfaces
+
+    /// <summary>
+    /// Declares methods and properties that enables a running checksum to be calculated
+    /// </summary>
+    public interface ChecksumGenerator
+    {
+        /// <summary>
+        /// Gets the current value of the checksum
+        /// </summary>
+        uint Value { get; }
+
+        /// <summary>
+        /// Clears the current checksum to 0
+        /// </summary>
+        void Reset();
+
+        /// <summary>
+        /// Updates the current checksum with an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        void Update(byte[] data);
+
+        /// <summary>
+        /// Updates the current checksum with part of an array of bytes
+        /// </summary>
+        /// <param name="data">The data to update the checksum with</param>
+        /// <param name="offset">Where in <c>data</c> to start updating</param>
+        /// <param name="count">The number of bytes from <c>data</c> to use</param>
+        /// <exception cref="ArgumentException">The sum of offset and count is larger than the length of <c>data</c></exception>
+        /// <exception cref="ArgumentNullException"><c>data</c> is a null reference</exception>
+        /// <exception cref="ArgumentOutOfRangeException">Offset or count is negative.</exception>
+        void Update(byte[] data, int offset, int count);
+
+        /// <summary>
+        /// Updates the current checksum with the data from a string
+        /// </summary>
+        /// <param name="data">The string to update the checksum with</param>
+        /// <remarks>The characters in the string are converted by the UTF-8 encoding</remarks>
+        void Update(string data);
+
+        /// <summary>
+        /// Updates the current checksum with the data from a string, using a specific encoding
+        /// </summary>
+        /// <param name="data">The string to update the checksum with</param>
+        /// <param name="encoding">The encoding to use</param>
+        void Update(string data, Encoding encoding);
+    }
+
+
+    /// <summary>
+    /// Represents the method that will be called from a codec when new data
+    /// are available.
+    /// </summary>
+    /// <paramref name="data">The byte array containing the processed data</paramref>
+    /// <paramref name="startIndex">The index of the first processed byte in <c>data</c></paramref>
+    /// <paramref name="count">The number of processed bytes available</paramref>
+    /// <remarks>On return from this method, the data may be overwritten, so grab it while you can.
+    /// You cannot assume that startIndex will be zero.
+    /// </remarks>
+    public delegate void DataAvailableHandler(byte[] data, int startIndex, int count);
+
+    /// <summary>
+    /// Declares methods and events for implementing compressors/decompressors
+    /// </summary>
+    public interface Codec
+    {
+        /// <summary>
+        /// Occurs when more processed data are available.
+        /// </summary>
+        event DataAvailableHandler DataAvailable;
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        void Add(byte[] data);
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+        /// <param name="count">The number of bytes to add</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        void Add(byte[] data, int offset, int count);
+
+        /// <summary>
+        /// Finishes up any pending data that needs to be processed and handled.
+        /// </summary>
+        void Finish();
+
+        /// <summary>
+        /// Gets the checksum of the data that has been added so far
+        /// </summary>
+        uint Checksum { get; }
+
+
+    }
+
+    #endregion
+
+    #region Classes
+    /// <summary>
+    /// Encapsulates general information about the ZLib library
+    /// </summary>
+    public class Info
+    {
+        #region DLL imports
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern uint zlibCompileFlags();
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern string zlibVersion();
+        #endregion
+
+        #region Private stuff
+        private uint _flags;
+
+        // helper function that unpacks a bitsize mask
+        private static int bitSize(uint bits)
+        {
+            switch (bits)
+            {
+                case 0: return 16;
+                case 1: return 32;
+                case 2: return 64;
+            }
+            return -1;
+        }
+        #endregion
+
+        /// <summary>
+        /// Constructs an instance of the <c>Info</c> class.
+        /// </summary>
+        public Info()
+        {
+            _flags = zlibCompileFlags();
+        }
+
+        /// <summary>
+        /// True if the library is compiled with debug info
+        /// </summary>
+        public bool HasDebugInfo { get { return 0 != (_flags & 0x100); } }
+
+        /// <summary>
+        /// True if the library is compiled with assembly optimizations
+        /// </summary>
+        public bool UsesAssemblyCode { get { return 0 != (_flags & 0x200); } }
+
+        /// <summary>
+        /// Gets the size of the unsigned int that was compiled into Zlib
+        /// </summary>
+        public int SizeOfUInt { get { return bitSize(_flags & 3); } }
+
+        /// <summary>
+        /// Gets the size of the unsigned long that was compiled into Zlib
+        /// </summary>
+        public int SizeOfULong { get { return bitSize((_flags >> 2) & 3); } }
+
+        /// <summary>
+        /// Gets the size of the pointers that were compiled into Zlib
+        /// </summary>
+        public int SizeOfPointer { get { return bitSize((_flags >> 4) & 3); } }
+
+        /// <summary>
+        /// Gets the size of the z_off_t type that was compiled into Zlib
+        /// </summary>
+        public int SizeOfOffset { get { return bitSize((_flags >> 6) & 3); } }
+
+        /// <summary>
+        /// Gets the version of ZLib as a string, e.g. "1.2.1"
+        /// </summary>
+        public static string Version { get { return zlibVersion(); } }
+    }
+
+    #endregion
+
+}

contrib/dotzlib/DotZLib/DotZLib.csproj

@@ -0,0 +1,141 @@
+<VisualStudioProject>
+    <CSHARP
+        ProjectType = "Local"
+        ProductVersion = "7.10.3077"
+        SchemaVersion = "2.0"
+        ProjectGuid = "{BB1EE0B1-1808-46CB-B786-949D91117FC5}"
+    >
+        <Build>
+            <Settings
+                ApplicationIcon = ""
+                AssemblyKeyContainerName = ""
+                AssemblyName = "DotZLib"
+                AssemblyOriginatorKeyFile = ""
+                DefaultClientScript = "JScript"
+                DefaultHTMLPageLayout = "Grid"
+                DefaultTargetSchema = "IE50"
+                DelaySign = "false"
+                OutputType = "Library"
+                PreBuildEvent = ""
+                PostBuildEvent = ""
+                RootNamespace = "DotZLib"
+                RunPostBuildEvent = "OnBuildSuccess"
+                StartupObject = ""
+            >
+                <Config
+                    Name = "Debug"
+                    AllowUnsafeBlocks = "false"
+                    BaseAddress = "285212672"
+                    CheckForOverflowUnderflow = "false"
+                    ConfigurationOverrideFile = ""
+                    DefineConstants = "DEBUG;TRACE"
+                    DocumentationFile = "docs\DotZLib.xml"
+                    DebugSymbols = "true"
+                    FileAlignment = "4096"
+                    IncrementalBuild = "false"
+                    NoStdLib = "false"
+                    NoWarn = "1591"
+                    Optimize = "false"
+                    OutputPath = "bin\Debug\"
+                    RegisterForComInterop = "false"
+                    RemoveIntegerChecks = "false"
+                    TreatWarningsAsErrors = "false"
+                    WarningLevel = "4"
+                />
+                <Config
+                    Name = "Release"
+                    AllowUnsafeBlocks = "false"
+                    BaseAddress = "285212672"
+                    CheckForOverflowUnderflow = "false"
+                    ConfigurationOverrideFile = ""
+                    DefineConstants = "TRACE"
+                    DocumentationFile = "docs\DotZLib.xml"
+                    DebugSymbols = "false"
+                    FileAlignment = "4096"
+                    IncrementalBuild = "false"
+                    NoStdLib = "false"
+                    NoWarn = ""
+                    Optimize = "true"
+                    OutputPath = "bin\Release\"
+                    RegisterForComInterop = "false"
+                    RemoveIntegerChecks = "false"
+                    TreatWarningsAsErrors = "false"
+                    WarningLevel = "4"
+                />
+            </Settings>
+            <References>
+                <Reference
+                    Name = "System"
+                    AssemblyName = "System"
+                    HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\System.dll"
+                />
+                <Reference
+                    Name = "System.Data"
+                    AssemblyName = "System.Data"
+                    HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\System.Data.dll"
+                />
+                <Reference
+                    Name = "System.XML"
+                    AssemblyName = "System.Xml"
+                    HintPath = "C:\WINNT\Microsoft.NET\Framework\v1.1.4322\System.XML.dll"
+                />
+                <Reference
+                    Name = "nunit.framework"
+                    AssemblyName = "nunit.framework"
+                    HintPath = "E:\apps\NUnit V2.1\\bin\nunit.framework.dll"
+                    AssemblyFolderKey = "hklm\dn\nunit.framework"
+                />
+            </References>
+        </Build>
+        <Files>
+            <Include>
+                <File
+                    RelPath = "AssemblyInfo.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "ChecksumImpl.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "CircularBuffer.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "CodecBase.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "Deflater.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "DotZLib.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "GZipStream.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "Inflater.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "UnitTests.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+            </Include>
+        </Files>
+    </CSHARP>
+</VisualStudioProject>
+

contrib/dotzlib/DotZLib/GZipStream.cs

@@ -0,0 +1,301 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.IO;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+	/// <summary>
+	/// Implements a compressed <see cref="Stream"/>, in GZip (.gz) format.
+	/// </summary>
+	public class GZipStream : Stream, IDisposable
+	{
+        #region Dll Imports
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)]
+        private static extern IntPtr gzopen(string name, string mode);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzclose(IntPtr gzFile);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzwrite(IntPtr gzFile, int data, int length);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzread(IntPtr gzFile, int data, int length);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzgetc(IntPtr gzFile);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int gzputc(IntPtr gzFile, int c);
+
+        #endregion
+
+        #region Private data
+        private IntPtr _gzFile;
+        private bool _isDisposed = false;
+        private bool _isWriting;
+        #endregion
+
+        #region Constructors
+        /// <summary>
+        /// Creates a new file as a writeable GZipStream
+        /// </summary>
+        /// <param name="fileName">The name of the compressed file to create</param>
+        /// <param name="level">The compression level to use when adding data</param>
+        /// <exception cref="ZLibException">If an error occurred in the internal zlib function</exception>
+		public GZipStream(string fileName, CompressLevel level)
+		{
+            _isWriting = true;
+            _gzFile = gzopen(fileName, String.Format("wb{0}", (int)level));
+            if (_gzFile == IntPtr.Zero)
+                throw new ZLibException(-1, "Could not open " + fileName);
+		}
+
+        /// <summary>
+        /// Opens an existing file as a readable GZipStream
+        /// </summary>
+        /// <param name="fileName">The name of the file to open</param>
+        /// <exception cref="ZLibException">If an error occurred in the internal zlib function</exception>
+        public GZipStream(string fileName)
+        {
+            _isWriting = false;
+            _gzFile = gzopen(fileName, "rb");
+            if (_gzFile == IntPtr.Zero)
+                throw new ZLibException(-1, "Could not open " + fileName);
+
+        }
+        #endregion
+
+        #region Access properties
+        /// <summary>
+        /// Returns true of this stream can be read from, false otherwise
+        /// </summary>
+        public override bool CanRead
+        {
+            get
+            {
+                return !_isWriting;
+            }
+        }
+
+
+        /// <summary>
+        /// Returns false.
+        /// </summary>
+        public override bool CanSeek
+        {
+            get
+            {
+                return false;
+            }
+        }
+
+        /// <summary>
+        /// Returns true if this tsream is writeable, false otherwise
+        /// </summary>
+        public override bool CanWrite
+        {
+            get
+            {
+                return _isWriting;
+            }
+        }
+        #endregion
+
+        #region Destructor & IDispose stuff
+
+        /// <summary>
+        /// Destroys this instance
+        /// </summary>
+        ~GZipStream()
+        {
+            cleanUp(false);
+        }
+
+        /// <summary>
+        /// Closes the external file handle
+        /// </summary>
+        public void Dispose()
+        {
+            cleanUp(true);
+        }
+
+        // Does the actual closing of the file handle.
+        private void cleanUp(bool isDisposing)
+        {
+            if (!_isDisposed)
+            {
+                gzclose(_gzFile);
+                _isDisposed = true;
+            }
+        }
+        #endregion
+
+        #region Basic reading and writing
+        /// <summary>
+        /// Attempts to read a number of bytes from the stream.
+        /// </summary>
+        /// <param name="buffer">The destination data buffer</param>
+        /// <param name="offset">The index of the first destination byte in <c>buffer</c></param>
+        /// <param name="count">The number of bytes requested</param>
+        /// <returns>The number of bytes read</returns>
+        /// <exception cref="ArgumentNullException">If <c>buffer</c> is null</exception>
+        /// <exception cref="ArgumentOutOfRangeException">If <c>count</c> or <c>offset</c> are negative</exception>
+        /// <exception cref="ArgumentException">If <c>offset</c>  + <c>count</c> is &gt; buffer.Length</exception>
+        /// <exception cref="NotSupportedException">If this stream is not readable.</exception>
+        /// <exception cref="ObjectDisposedException">If this stream has been disposed.</exception>
+        public override int Read(byte[] buffer, int offset, int count)
+        {
+            if (!CanRead) throw new NotSupportedException();
+            if (buffer == null) throw new ArgumentNullException();
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > buffer.Length) throw new ArgumentException();
+            if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+
+            GCHandle h = GCHandle.Alloc(buffer, GCHandleType.Pinned);
+            int result;
+            try
+            {
+                result = gzread(_gzFile, h.AddrOfPinnedObject().ToInt32() + offset, count);
+                if (result < 0)
+                    throw new IOException();
+            }
+            finally
+            {
+                h.Free();
+            }
+            return result;
+        }
+
+        /// <summary>
+        /// Attempts to read a single byte from the stream.
+        /// </summary>
+        /// <returns>The byte that was read, or -1 in case of error or End-Of-File</returns>
+        public override int ReadByte()
+        {
+            if (!CanRead) throw new NotSupportedException();
+            if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+            return gzgetc(_gzFile);
+        }
+
+        /// <summary>
+        /// Writes a number of bytes to the stream
+        /// </summary>
+        /// <param name="buffer"></param>
+        /// <param name="offset"></param>
+        /// <param name="count"></param>
+        /// <exception cref="ArgumentNullException">If <c>buffer</c> is null</exception>
+        /// <exception cref="ArgumentOutOfRangeException">If <c>count</c> or <c>offset</c> are negative</exception>
+        /// <exception cref="ArgumentException">If <c>offset</c>  + <c>count</c> is &gt; buffer.Length</exception>
+        /// <exception cref="NotSupportedException">If this stream is not writeable.</exception>
+        /// <exception cref="ObjectDisposedException">If this stream has been disposed.</exception>
+        public override void Write(byte[] buffer, int offset, int count)
+        {
+            if (!CanWrite) throw new NotSupportedException();
+            if (buffer == null) throw new ArgumentNullException();
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > buffer.Length) throw new ArgumentException();
+            if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+
+            GCHandle h = GCHandle.Alloc(buffer, GCHandleType.Pinned);
+            try
+            {
+                int result = gzwrite(_gzFile, h.AddrOfPinnedObject().ToInt32() + offset, count);
+                if (result < 0)
+                    throw new IOException();
+            }
+            finally
+            {
+                h.Free();
+            }
+        }
+
+        /// <summary>
+        /// Writes a single byte to the stream
+        /// </summary>
+        /// <param name="value">The byte to add to the stream.</param>
+        /// <exception cref="NotSupportedException">If this stream is not writeable.</exception>
+        /// <exception cref="ObjectDisposedException">If this stream has been disposed.</exception>
+        public override void WriteByte(byte value)
+        {
+            if (!CanWrite) throw new NotSupportedException();
+            if (_isDisposed) throw new ObjectDisposedException("GZipStream");
+
+            int result = gzputc(_gzFile, (int)value);
+            if (result < 0)
+                throw new IOException();
+        }
+        #endregion
+
+        #region Position & length stuff
+        /// <summary>
+        /// Not supported.
+        /// </summary>
+        /// <param name="value"></param>
+        /// <exception cref="NotSupportedException">Always thrown</exception>
+        public override void SetLength(long value)
+        {
+            throw new NotSupportedException();
+        }
+
+        /// <summary>
+        ///  Not suppported.
+        /// </summary>
+        /// <param name="offset"></param>
+        /// <param name="origin"></param>
+        /// <returns></returns>
+        /// <exception cref="NotSupportedException">Always thrown</exception>
+        public override long Seek(long offset, SeekOrigin origin)
+        {
+            throw new NotSupportedException();
+        }
+
+        /// <summary>
+        /// Flushes the <c>GZipStream</c>.
+        /// </summary>
+        /// <remarks>In this implementation, this method does nothing. This is because excessive
+        /// flushing may degrade the achievable compression rates.</remarks>
+        public override void Flush()
+        {
+            // left empty on purpose
+        }
+
+        /// <summary>
+        /// Gets/sets the current position in the <c>GZipStream</c>. Not suppported.
+        /// </summary>
+        /// <remarks>In this implementation this property is not supported</remarks>
+        /// <exception cref="NotSupportedException">Always thrown</exception>
+        public override long Position
+        {
+            get
+            {
+                throw new NotSupportedException();
+            }
+            set
+            {
+                throw new NotSupportedException();
+            }
+        }
+
+        /// <summary>
+        /// Gets the size of the stream. Not suppported.
+        /// </summary>
+        /// <remarks>In this implementation this property is not supported</remarks>
+        /// <exception cref="NotSupportedException">Always thrown</exception>
+        public override long Length
+        {
+            get
+            {
+                throw new NotSupportedException();
+            }
+        }
+        #endregion
+    }
+}

contrib/dotzlib/DotZLib/Inflater.cs

@@ -0,0 +1,105 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Diagnostics;
+using System.Runtime.InteropServices;
+
+namespace DotZLib
+{
+
+    /// <summary>
+    /// Implements a data decompressor, using the inflate algorithm in the ZLib dll
+    /// </summary>
+    public class Inflater : CodecBase
+	{
+        #region Dll imports
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl, CharSet=CharSet.Ansi)]
+        private static extern int inflateInit_(ref ZStream sz, string vs, int size);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int inflate(ref ZStream sz, int flush);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int inflateReset(ref ZStream sz);
+
+        [DllImport("ZLIB1.dll", CallingConvention=CallingConvention.Cdecl)]
+        private static extern int inflateEnd(ref ZStream sz);
+        #endregion
+
+        /// <summary>
+        /// Constructs an new instance of the <c>Inflater</c>
+        /// </summary>
+        public Inflater() : base()
+		{
+            int retval = inflateInit_(ref _ztream, Info.Version, Marshal.SizeOf(_ztream));
+            if (retval != 0)
+                throw new ZLibException(retval, "Could not initialize inflater");
+
+            resetOutput();
+        }
+
+
+        /// <summary>
+        /// Adds more data to the codec to be processed.
+        /// </summary>
+        /// <param name="data">Byte array containing the data to be added to the codec</param>
+        /// <param name="offset">The index of the first byte to add from <c>data</c></param>
+        /// <param name="count">The number of bytes to add</param>
+        /// <remarks>Adding data may, or may not, raise the <c>DataAvailable</c> event</remarks>
+        public override void Add(byte[] data, int offset, int count)
+        {
+            if (data == null) throw new ArgumentNullException();
+            if (offset < 0 || count < 0) throw new ArgumentOutOfRangeException();
+            if ((offset+count) > data.Length) throw new ArgumentException();
+
+            int total = count;
+            int inputIndex = offset;
+            int err = 0;
+
+            while (err >= 0 && inputIndex < total)
+            {
+                copyInput(data, inputIndex, Math.Min(total - inputIndex, kBufferSize));
+                err = inflate(ref _ztream, (int)FlushTypes.None);
+                if (err == 0)
+                    while (_ztream.avail_out == 0)
+                    {
+                        OnDataAvailable();
+                        err = inflate(ref _ztream, (int)FlushTypes.None);
+                    }
+
+                inputIndex += (int)_ztream.total_in;
+            }
+            setChecksum( _ztream.adler );
+        }
+
+
+        /// <summary>
+        /// Finishes up any pending data that needs to be processed and handled.
+        /// </summary>
+        public override void Finish()
+        {
+            int err;
+            do
+            {
+                err = inflate(ref _ztream, (int)FlushTypes.Finish);
+                OnDataAvailable();
+            }
+            while (err == 0);
+            setChecksum( _ztream.adler );
+            inflateReset(ref _ztream);
+            resetOutput();
+        }
+
+        /// <summary>
+        /// Closes the internal zlib inflate stream
+        /// </summary>
+        protected override void CleanUp() { inflateEnd(ref _ztream); }
+
+
+	}
+}

contrib/dotzlib/DotZLib/UnitTests.cs

@@ -0,0 +1,274 @@
+//
+// <20> Copyright Henrik Ravn 2004
+//
+// Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+// (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
+//
+
+using System;
+using System.Collections;
+using System.IO;
+
+// uncomment the define below to include unit tests
+//#define nunit
+#if nunit
+using NUnit.Framework;
+
+// Unit tests for the DotZLib class library
+// ----------------------------------------
+//
+// Use this with NUnit 2 from http://www.nunit.org
+//
+
+namespace DotZLibTests
+{
+    using DotZLib;
+
+    // helper methods
+    internal class Utils
+    {
+        public static bool byteArrEqual( byte[] lhs, byte[] rhs )
+        {
+            if (lhs.Length != rhs.Length)
+                return false;
+            for (int i = lhs.Length-1; i >= 0; --i)
+                if (lhs[i] != rhs[i])
+                    return false;
+            return true;
+        }
+
+    }
+
+
+    [TestFixture]
+    public class CircBufferTests
+    {
+        #region Circular buffer tests
+        [Test]
+        public void SinglePutGet()
+        {
+            CircularBuffer buf = new CircularBuffer(10);
+            Assert.AreEqual( 0, buf.Size );
+            Assert.AreEqual( -1, buf.Get() );
+
+            Assert.IsTrue(buf.Put( 1 ));
+            Assert.AreEqual( 1, buf.Size );
+            Assert.AreEqual( 1, buf.Get() );
+            Assert.AreEqual( 0, buf.Size );
+            Assert.AreEqual( -1, buf.Get() );
+        }
+
+        [Test]
+        public void BlockPutGet()
+        {
+            CircularBuffer buf = new CircularBuffer(10);
+            byte[] arr = {1,2,3,4,5,6,7,8,9,10};
+            Assert.AreEqual( 10, buf.Put(arr,0,10) );
+            Assert.AreEqual( 10, buf.Size );
+            Assert.IsFalse( buf.Put(11) );
+            Assert.AreEqual( 1, buf.Get() );
+            Assert.IsTrue( buf.Put(11) );
+
+            byte[] arr2 = (byte[])arr.Clone();
+            Assert.AreEqual( 9, buf.Get(arr2,1,9) );
+            Assert.IsTrue( Utils.byteArrEqual(arr,arr2) );
+        }
+
+        #endregion
+    }
+
+    [TestFixture]
+    public class ChecksumTests
+    {
+        #region CRC32 Tests
+        [Test]
+        public void CRC32_Null()
+        {
+            CRC32Checksum crc32 = new CRC32Checksum();
+            Assert.AreEqual( 0, crc32.Value );
+
+            crc32 = new CRC32Checksum(1);
+            Assert.AreEqual( 1, crc32.Value );
+
+            crc32 = new CRC32Checksum(556);
+            Assert.AreEqual( 556, crc32.Value );
+        }
+
+        [Test]
+        public void CRC32_Data()
+        {
+            CRC32Checksum crc32 = new CRC32Checksum();
+            byte[] data = { 1,2,3,4,5,6,7 };
+            crc32.Update(data);
+            Assert.AreEqual( 0x70e46888, crc32.Value  );
+
+            crc32 = new CRC32Checksum();
+            crc32.Update("penguin");
+            Assert.AreEqual( 0x0e5c1a120, crc32.Value );
+
+            crc32 = new CRC32Checksum(1);
+            crc32.Update("penguin");
+            Assert.AreEqual(0x43b6aa94, crc32.Value);
+
+        }
+        #endregion
+
+        #region Adler tests
+
+        [Test]
+        public void Adler_Null()
+        {
+            AdlerChecksum adler = new AdlerChecksum();
+            Assert.AreEqual(0, adler.Value);
+
+            adler = new AdlerChecksum(1);
+            Assert.AreEqual( 1, adler.Value );
+
+            adler = new AdlerChecksum(556);
+            Assert.AreEqual( 556, adler.Value );
+        }
+
+        [Test]
+        public void Adler_Data()
+        {
+            AdlerChecksum adler = new AdlerChecksum(1);
+            byte[] data = { 1,2,3,4,5,6,7 };
+            adler.Update(data);
+            Assert.AreEqual( 0x5b001d, adler.Value  );
+
+            adler = new AdlerChecksum();
+            adler.Update("penguin");
+            Assert.AreEqual(0x0bcf02f6, adler.Value );
+
+            adler = new AdlerChecksum(1);
+            adler.Update("penguin");
+            Assert.AreEqual(0x0bd602f7, adler.Value);
+
+        }
+        #endregion
+    }
+
+    [TestFixture]
+    public class InfoTests
+    {
+        #region Info tests
+        [Test]
+        public void Info_Version()
+        {
+            Info info = new Info();
+            Assert.AreEqual("1.2.5", Info.Version);
+            Assert.AreEqual(32, info.SizeOfUInt);
+            Assert.AreEqual(32, info.SizeOfULong);
+            Assert.AreEqual(32, info.SizeOfPointer);
+            Assert.AreEqual(32, info.SizeOfOffset);
+        }
+        #endregion
+    }
+
+    [TestFixture]
+    public class DeflateInflateTests
+    {
+        #region Deflate tests
+        [Test]
+        public void Deflate_Init()
+        {
+            using (Deflater def = new Deflater(CompressLevel.Default))
+            {
+            }
+        }
+
+        private ArrayList compressedData = new ArrayList();
+        private uint adler1;
+
+        private ArrayList uncompressedData = new ArrayList();
+        private uint adler2;
+
+        public void CDataAvail(byte[] data, int startIndex, int count)
+        {
+            for (int i = 0; i < count; ++i)
+                compressedData.Add(data[i+startIndex]);
+        }
+
+        [Test]
+        public void Deflate_Compress()
+        {
+            compressedData.Clear();
+
+            byte[] testData = new byte[35000];
+            for (int i = 0; i < testData.Length; ++i)
+                testData[i] = 5;
+
+            using (Deflater def = new Deflater((CompressLevel)5))
+            {
+                def.DataAvailable += new DataAvailableHandler(CDataAvail);
+                def.Add(testData);
+                def.Finish();
+                adler1 = def.Checksum;
+            }
+        }
+        #endregion
+
+        #region Inflate tests
+        [Test]
+        public void Inflate_Init()
+        {
+            using (Inflater inf = new Inflater())
+            {
+            }
+        }
+
+        private void DDataAvail(byte[] data, int startIndex, int count)
+        {
+            for (int i = 0; i < count; ++i)
+                uncompressedData.Add(data[i+startIndex]);
+        }
+
+        [Test]
+        public void Inflate_Expand()
+        {
+            uncompressedData.Clear();
+
+            using (Inflater inf = new Inflater())
+            {
+                inf.DataAvailable += new DataAvailableHandler(DDataAvail);
+                inf.Add((byte[])compressedData.ToArray(typeof(byte)));
+                inf.Finish();
+                adler2 = inf.Checksum;
+            }
+            Assert.AreEqual( adler1, adler2 );
+        }
+        #endregion
+    }
+
+    [TestFixture]
+    public class GZipStreamTests
+    {
+        #region GZipStream test
+        [Test]
+        public void GZipStream_WriteRead()
+        {
+            using (GZipStream gzOut = new GZipStream("gzstream.gz", CompressLevel.Best))
+            {
+                BinaryWriter writer = new BinaryWriter(gzOut);
+                writer.Write("hi there");
+                writer.Write(Math.PI);
+                writer.Write(42);
+            }
+
+            using (GZipStream gzIn = new GZipStream("gzstream.gz"))
+            {
+                BinaryReader reader = new BinaryReader(gzIn);
+                string s = reader.ReadString();
+                Assert.AreEqual("hi there",s);
+                double d = reader.ReadDouble();
+                Assert.AreEqual(Math.PI, d);
+                int i = reader.ReadInt32();
+                Assert.AreEqual(42,i);
+            }
+
+        }
+        #endregion
+	}
+}
+
+#endif

contrib/dotzlib/LICENSE_1_0.txt

@@ -0,0 +1,23 @@
+Boost Software License - Version 1.0 - August 17th, 2003
+
+Permission is hereby granted, free of charge, to any person or organization
+obtaining a copy of the software and accompanying documentation covered by
+this license (the "Software") to use, reproduce, display, distribute,
+execute, and transmit the Software, and to prepare derivative works of the
+Software, and to permit third-parties to whom the Software is furnished to
+do so, all subject to the following:
+
+The copyright notices in the Software and this entire statement, including
+the above license grant, this restriction and the following disclaimer,
+must be included in all copies of the Software, in whole or in part, and
+all derivative works of the Software, unless such copies or derivative
+works are solely in the form of machine-executable object code generated by
+a source language processor.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT
+SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE
+FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE,
+ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+DEALINGS IN THE SOFTWARE.

contrib/dotzlib/readme.txt

@@ -0,0 +1,58 @@
+This directory contains a .Net wrapper class library for the ZLib1.dll
+
+The wrapper includes support for inflating/deflating memory buffers,
+.Net streaming wrappers for the gz streams part of zlib, and wrappers
+for the checksum parts of zlib. See DotZLib/UnitTests.cs for examples.
+
+Directory structure:
+--------------------
+
+LICENSE_1_0.txt       - License file.
+readme.txt            - This file.
+DotZLib.chm           - Class library documentation
+DotZLib.build         - NAnt build file
+DotZLib.sln           - Microsoft Visual Studio 2003 solution file
+
+DotZLib\*.cs          - Source files for the class library
+
+Unit tests:
+-----------
+The file DotZLib/UnitTests.cs contains unit tests for use with NUnit 2.1 or higher.
+To include unit tests in the build, define nunit before building.
+
+
+Build instructions:
+-------------------
+
+1. Using Visual Studio.Net 2003:
+   Open DotZLib.sln in VS.Net and build from there. Output file (DotZLib.dll)
+   will be found ./DotZLib/bin/release or ./DotZLib/bin/debug, depending on
+   you are building the release or debug version of the library. Check
+   DotZLib/UnitTests.cs for instructions on how to include unit tests in the
+   build.
+
+2. Using NAnt:
+   Open a command prompt with access to the build environment and run nant
+   in the same directory as the DotZLib.build file.
+   You can define 2 properties on the nant command-line to control the build:
+   debug={true|false} to toggle between release/debug builds (default=true).
+   nunit={true|false} to include or esclude unit tests (default=true).
+   Also the target clean will remove binaries.
+   Output file (DotZLib.dll) will be found in either ./DotZLib/bin/release
+   or ./DotZLib/bin/debug, depending on whether you are building the release
+   or debug version of the library.
+
+   Examples:
+     nant -D:debug=false -D:nunit=false
+       will build a release mode version of the library without unit tests.
+     nant
+       will build a debug version of the library with unit tests
+     nant clean
+       will remove all previously built files.
+
+
+---------------------------------
+Copyright (c) Henrik Ravn 2004
+
+Use, modification and distribution are subject to the Boost Software License, Version 1.0.
+(See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)

contrib/gcc_gvmat64/gvmat64.S

@@ -0,0 +1,574 @@
+/*
+;uInt longest_match_x64(
+;    deflate_state *s,
+;    IPos cur_match);                             // current match 
+
+; gvmat64.S -- Asm portion of the optimized longest_match for 32 bits x86_64
+;  (AMD64 on Athlon 64, Opteron, Phenom
+;     and Intel EM64T on Pentium 4 with EM64T, Pentium D, Core 2 Duo, Core I5/I7)
+; this file is translation from gvmat64.asm to GCC 4.x (for Linux, Mac XCode)
+; Copyright (C) 1995-2010 Jean-loup Gailly, Brian Raiter and Gilles Vollant.
+;
+; File written by Gilles Vollant, by converting to assembly the longest_match
+;  from Jean-loup Gailly in deflate.c of zLib and infoZip zip.
+;  and by taking inspiration on asm686 with masm, optimised assembly code
+;        from Brian Raiter, written 1998
+;
+;  This software is provided 'as-is', without any express or implied
+;  warranty.  In no event will the authors be held liable for any damages
+;  arising from the use of this software.
+;
+;  Permission is granted to anyone to use this software for any purpose,
+;  including commercial applications, and to alter it and redistribute it
+;  freely, subject to the following restrictions:
+;
+;  1. The origin of this software must not be misrepresented; you must not
+;     claim that you wrote the original software. If you use this software
+;     in a product, an acknowledgment in the product documentation would be
+;     appreciated but is not required.
+;  2. Altered source versions must be plainly marked as such, and must not be
+;     misrepresented as being the original software
+;  3. This notice may not be removed or altered from any source distribution.
+;
+;         http://www.zlib.net
+;         http://www.winimage.com/zLibDll
+;         http://www.muppetlabs.com/~breadbox/software/assembly.html
+;
+; to compile this file for zLib, I use option:
+;   gcc -c -arch x86_64 gvmat64.S
+
+
+;uInt longest_match(s, cur_match)
+;    deflate_state *s;
+;    IPos cur_match;                             // current match /
+;
+; with XCode for Mac, I had strange error with some jump on intel syntax
+; this is why BEFORE_JMP and AFTER_JMP are used
+ */
+
+
+#define BEFORE_JMP .att_syntax
+#define AFTER_JMP .intel_syntax noprefix
+
+#ifndef NO_UNDERLINE
+#	define	match_init	_match_init
+#	define	longest_match	_longest_match
+#endif
+
+.intel_syntax noprefix
+
+.globl	match_init, longest_match
+.text
+longest_match:
+
+
+
+#define LocalVarsSize 96
+/*
+; register used : rax,rbx,rcx,rdx,rsi,rdi,r8,r9,r10,r11,r12
+; free register :  r14,r15
+; register can be saved : rsp
+*/
+
+#define chainlenwmask     (rsp + 8 - LocalVarsSize)
+#define nicematch         (rsp + 16 - LocalVarsSize)
+
+#define save_rdi        (rsp + 24 - LocalVarsSize)
+#define save_rsi        (rsp + 32 - LocalVarsSize)
+#define save_rbx        (rsp + 40 - LocalVarsSize)
+#define save_rbp        (rsp + 48 - LocalVarsSize)
+#define save_r12        (rsp + 56 - LocalVarsSize)
+#define save_r13        (rsp + 64 - LocalVarsSize)
+#define save_r14        (rsp + 72 - LocalVarsSize)
+#define save_r15        (rsp + 80 - LocalVarsSize)
+
+
+/*
+;  all the +4 offsets are due to the addition of pending_buf_size (in zlib
+;  in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, remove the +4).
+;  Note : these value are good with a 8 bytes boundary pack structure
+*/
+
+#define    MAX_MATCH              258
+#define    MIN_MATCH              3
+#define    MIN_LOOKAHEAD          (MAX_MATCH+MIN_MATCH+1)
+
+/*
+;;; Offsets for fields in the deflate_state structure. These numbers
+;;; are calculated from the definition of deflate_state, with the
+;;; assumption that the compiler will dword-align the fields. (Thus,
+;;; changing the definition of deflate_state could easily cause this
+;;; program to crash horribly, without so much as a warning at
+;;; compile time. Sigh.)
+
+;  all the +zlib1222add offsets are due to the addition of fields
+;  in zlib in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+;  (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+;  if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
+*/
+
+
+
+/* you can check the structure offset by running
+
+#include <stdlib.h>
+#include <stdio.h>
+#include "deflate.h"
+
+void print_depl()
+{
+deflate_state ds;
+deflate_state *s=&ds;
+printf("size pointer=%u\n",(int)sizeof(void*));
+
+printf("#define dsWSize         %u\n",(int)(((char*)&(s->w_size))-((char*)s)));
+printf("#define dsWMask         %u\n",(int)(((char*)&(s->w_mask))-((char*)s)));
+printf("#define dsWindow        %u\n",(int)(((char*)&(s->window))-((char*)s)));
+printf("#define dsPrev          %u\n",(int)(((char*)&(s->prev))-((char*)s)));
+printf("#define dsMatchLen      %u\n",(int)(((char*)&(s->match_length))-((char*)s)));
+printf("#define dsPrevMatch     %u\n",(int)(((char*)&(s->prev_match))-((char*)s)));
+printf("#define dsStrStart      %u\n",(int)(((char*)&(s->strstart))-((char*)s)));
+printf("#define dsMatchStart    %u\n",(int)(((char*)&(s->match_start))-((char*)s)));
+printf("#define dsLookahead     %u\n",(int)(((char*)&(s->lookahead))-((char*)s)));
+printf("#define dsPrevLen       %u\n",(int)(((char*)&(s->prev_length))-((char*)s)));
+printf("#define dsMaxChainLen   %u\n",(int)(((char*)&(s->max_chain_length))-((char*)s)));
+printf("#define dsGoodMatch     %u\n",(int)(((char*)&(s->good_match))-((char*)s)));
+printf("#define dsNiceMatch     %u\n",(int)(((char*)&(s->nice_match))-((char*)s)));
+}
+*/
+
+#define dsWSize          68
+#define dsWMask          76
+#define dsWindow         80
+#define dsPrev           96
+#define dsMatchLen       144
+#define dsPrevMatch      148
+#define dsStrStart       156
+#define dsMatchStart     160
+#define dsLookahead      164
+#define dsPrevLen        168
+#define dsMaxChainLen    172
+#define dsGoodMatch      188
+#define dsNiceMatch      192
+
+#define window_size      [ rcx + dsWSize]
+#define WMask            [ rcx + dsWMask]
+#define window_ad        [ rcx + dsWindow]
+#define prev_ad          [ rcx + dsPrev]
+#define strstart         [ rcx + dsStrStart]
+#define match_start      [ rcx + dsMatchStart]
+#define Lookahead        [ rcx + dsLookahead] //; 0ffffffffh on infozip
+#define prev_length      [ rcx + dsPrevLen]
+#define max_chain_length [ rcx + dsMaxChainLen]
+#define good_match       [ rcx + dsGoodMatch]
+#define nice_match       [ rcx + dsNiceMatch]
+
+/*
+; windows:
+; parameter 1 in rcx(deflate state s), param 2 in rdx (cur match)
+
+; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and
+; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp
+;
+; All registers must be preserved across the call, except for
+;   rax, rcx, rdx, r8, r9, r10, and r11, which are scratch.
+
+;
+; gcc on macosx-linux:
+; see http://www.x86-64.org/documentation/abi-0.99.pdf
+; param 1 in rdi, param 2 in rsi
+; rbx, rsp, rbp, r12 to r15 must be preserved
+
+;;; Save registers that the compiler may be using, and adjust esp to
+;;; make room for our stack frame.
+
+
+;;; Retrieve the function arguments. r8d will hold cur_match
+;;; throughout the entire function. edx will hold the pointer to the
+;;; deflate_state structure during the function's setup (before
+;;; entering the main loop.
+
+; ms: parameter 1 in rcx (deflate_state* s), param 2 in edx -> r8 (cur match)
+; mac: param 1 in rdi, param 2 rsi
+; this clear high 32 bits of r8, which can be garbage in both r8 and rdx
+*/
+        mov [save_rbx],rbx
+        mov [save_rbp],rbp
+
+
+        mov rcx,rdi
+
+        mov r8d,esi
+
+
+        mov [save_r12],r12
+        mov [save_r13],r13
+        mov [save_r14],r14
+        mov [save_r15],r15
+
+
+//;;; uInt wmask = s->w_mask;
+//;;; unsigned chain_length = s->max_chain_length;
+//;;; if (s->prev_length >= s->good_match) {
+//;;;     chain_length >>= 2;
+//;;; }
+
+
+        mov edi, prev_length
+        mov esi, good_match
+        mov eax, WMask
+        mov ebx, max_chain_length
+        cmp edi, esi
+        jl  LastMatchGood
+        shr ebx, 2
+LastMatchGood:
+
+//;;; chainlen is decremented once beforehand so that the function can
+//;;; use the sign flag instead of the zero flag for the exit test.
+//;;; It is then shifted into the high word, to make room for the wmask
+//;;; value, which it will always accompany.
+
+        dec ebx
+        shl ebx, 16
+        or  ebx, eax
+
+//;;; on zlib only
+//;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+
+
+        mov eax, nice_match
+        mov [chainlenwmask], ebx
+        mov r10d, Lookahead
+        cmp r10d, eax
+        cmovnl r10d, eax
+        mov [nicematch],r10d
+
+
+
+//;;; register Bytef *scan = s->window + s->strstart;
+        mov r10, window_ad
+        mov ebp, strstart
+        lea r13, [r10 + rbp]
+
+//;;; Determine how many bytes the scan ptr is off from being
+//;;; dword-aligned.
+
+         mov r9,r13
+         neg r13
+         and r13,3
+
+//;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+//;;;     s->strstart - (IPos)MAX_DIST(s) : NIL;
+
+
+        mov eax, window_size
+        sub eax, MIN_LOOKAHEAD
+
+
+        xor edi,edi
+        sub ebp, eax
+
+        mov r11d, prev_length
+
+        cmovng ebp,edi
+
+//;;; int best_len = s->prev_length;
+
+
+//;;; Store the sum of s->window + best_len in esi locally, and in esi.
+
+       lea  rsi,[r10+r11]
+
+//;;; register ush scan_start = *(ushf*)scan;
+//;;; register ush scan_end   = *(ushf*)(scan+best_len-1);
+//;;; Posf *prev = s->prev;
+
+        movzx r12d,word ptr [r9]
+        movzx ebx, word ptr [r9 + r11 - 1]
+
+        mov rdi, prev_ad
+
+//;;; Jump into the main loop.
+
+        mov edx, [chainlenwmask]
+
+        cmp bx,word ptr [rsi + r8 - 1]
+        jz  LookupLoopIsZero
+				
+						
+						
+LookupLoop1:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+		
+		
+		
+        sub edx, 0x00010000
+		BEFORE_JMP
+        js  LeaveNow
+		AFTER_JMP
+
+LoopEntry1:
+        cmp bx,word ptr [rsi + r8 - 1]
+		BEFORE_JMP
+        jz  LookupLoopIsZero
+		AFTER_JMP
+
+LookupLoop2:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+		BEFORE_JMP
+        jbe LeaveNow
+		AFTER_JMP
+        sub edx, 0x00010000
+		BEFORE_JMP
+        js  LeaveNow
+		AFTER_JMP
+
+LoopEntry2:
+        cmp bx,word ptr [rsi + r8 - 1]
+		BEFORE_JMP
+        jz  LookupLoopIsZero
+		AFTER_JMP
+
+LookupLoop4:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+		BEFORE_JMP
+        jbe LeaveNow
+		AFTER_JMP
+        sub edx, 0x00010000
+		BEFORE_JMP
+        js  LeaveNow
+		AFTER_JMP
+
+LoopEntry4:
+
+        cmp bx,word ptr [rsi + r8 - 1]
+		BEFORE_JMP
+        jnz LookupLoop1
+        jmp LookupLoopIsZero
+		AFTER_JMP
+/*
+;;; do {
+;;;     match = s->window + cur_match;
+;;;     if (*(ushf*)(match+best_len-1) != scan_end ||
+;;;         *(ushf*)match != scan_start) continue;
+;;;     [...]
+;;; } while ((cur_match = prev[cur_match & wmask]) > limit
+;;;          && --chain_length != 0);
+;;;
+;;; Here is the inner loop of the function. The function will spend the
+;;; majority of its time in this loop, and majority of that time will
+;;; be spent in the first ten instructions.
+;;;
+;;; Within this loop:
+;;; ebx = scanend
+;;; r8d = curmatch
+;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
+;;; esi = windowbestlen - i.e., (window + bestlen)
+;;; edi = prev
+;;; ebp = limit
+*/
+.balign 16
+LookupLoop:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+		BEFORE_JMP
+        jbe LeaveNow
+		AFTER_JMP
+        sub edx, 0x00010000
+		BEFORE_JMP
+        js  LeaveNow
+		AFTER_JMP
+
+LoopEntry:
+
+        cmp bx,word ptr [rsi + r8 - 1]
+		BEFORE_JMP
+        jnz LookupLoop1
+		AFTER_JMP
+LookupLoopIsZero:
+        cmp     r12w, word ptr [r10 + r8]
+		BEFORE_JMP
+        jnz LookupLoop1
+		AFTER_JMP
+
+
+//;;; Store the current value of chainlen.
+        mov [chainlenwmask], edx
+/*
+;;; Point edi to the string under scrutiny, and esi to the string we
+;;; are hoping to match it up with. In actuality, esi and edi are
+;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is
+;;; initialized to -(MAX_MATCH_8 - scanalign).
+*/
+        lea rsi,[r8+r10]
+        mov rdx, 0xfffffffffffffef8 //; -(MAX_MATCH_8)
+        lea rsi, [rsi + r13 + 0x0108] //;MAX_MATCH_8]
+        lea rdi, [r9 + r13 + 0x0108] //;MAX_MATCH_8]
+
+        prefetcht1 [rsi+rdx]
+        prefetcht1 [rdi+rdx]
+
+/*
+;;; Test the strings for equality, 8 bytes at a time. At the end,
+;;; adjust rdx so that it is offset to the exact byte that mismatched.
+;;;
+;;; We already know at this point that the first three bytes of the
+;;; strings match each other, and they can be safely passed over before
+;;; starting the compare loop. So what this code does is skip over 0-3
+;;; bytes, as much as necessary in order to dword-align the edi
+;;; pointer. (rsi will still be misaligned three times out of four.)
+;;;
+;;; It should be confessed that this loop usually does not represent
+;;; much of the total running time. Replacing it with a more
+;;; straightforward "rep cmpsb" would not drastically degrade
+;;; performance.
+*/
+
+LoopCmps:
+        mov rax, [rsi + rdx]
+        xor rax, [rdi + rdx]
+        jnz LeaveLoopCmps
+
+        mov rax, [rsi + rdx + 8]
+        xor rax, [rdi + rdx + 8]
+        jnz LeaveLoopCmps8
+
+
+        mov rax, [rsi + rdx + 8+8]
+        xor rax, [rdi + rdx + 8+8]
+        jnz LeaveLoopCmps16
+
+        add rdx,8+8+8
+
+		BEFORE_JMP
+        jnz  LoopCmps
+        jmp  LenMaximum
+		AFTER_JMP
+		
+LeaveLoopCmps16: add rdx,8
+LeaveLoopCmps8: add rdx,8
+LeaveLoopCmps:
+
+        test    eax, 0x0000FFFF
+        jnz LenLower
+
+        test eax,0xffffffff
+
+        jnz LenLower32
+
+        add rdx,4
+        shr rax,32
+        or ax,ax
+		BEFORE_JMP
+        jnz LenLower
+		AFTER_JMP
+
+LenLower32:
+        shr eax,16
+        add rdx,2
+		
+LenLower:		
+        sub al, 1
+        adc rdx, 0
+//;;; Calculate the length of the match. If it is longer than MAX_MATCH,
+//;;; then automatically accept it as the best possible match and leave.
+
+        lea rax, [rdi + rdx]
+        sub rax, r9
+        cmp eax, MAX_MATCH
+		BEFORE_JMP
+        jge LenMaximum
+		AFTER_JMP
+/*
+;;; If the length of the match is not longer than the best match we
+;;; have so far, then forget it and return to the lookup loop.
+;///////////////////////////////////
+*/
+        cmp eax, r11d
+        jg  LongerMatch
+
+        lea rsi,[r10+r11]
+
+        mov rdi, prev_ad
+        mov edx, [chainlenwmask]
+		BEFORE_JMP
+        jmp LookupLoop
+		AFTER_JMP
+/*
+;;;         s->match_start = cur_match;
+;;;         best_len = len;
+;;;         if (len >= nice_match) break;
+;;;         scan_end = *(ushf*)(scan+best_len-1);
+*/
+LongerMatch:
+        mov r11d, eax
+        mov match_start, r8d
+        cmp eax, [nicematch]
+		BEFORE_JMP
+        jge LeaveNow
+		AFTER_JMP
+
+        lea rsi,[r10+rax]
+
+        movzx   ebx, word ptr [r9 + rax - 1]
+        mov rdi, prev_ad
+        mov edx, [chainlenwmask]
+		BEFORE_JMP
+        jmp LookupLoop
+		AFTER_JMP
+
+//;;; Accept the current string, with the maximum possible length.
+
+LenMaximum:
+        mov r11d,MAX_MATCH
+        mov match_start, r8d
+
+//;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+//;;; return s->lookahead;
+
+LeaveNow:
+        mov eax, Lookahead
+        cmp r11d, eax
+        cmovng eax, r11d
+
+
+
+//;;; Restore the stack and return from whence we came.
+
+
+//        mov rsi,[save_rsi]
+//        mov rdi,[save_rdi]
+        mov rbx,[save_rbx]
+        mov rbp,[save_rbp]
+        mov r12,[save_r12]
+        mov r13,[save_r13]
+        mov r14,[save_r14]
+        mov r15,[save_r15]
+
+
+        ret 0
+//; please don't remove this string !
+//; Your can freely use gvmat64 in any free or commercial app
+//; but it is far better don't remove the string in the binary!
+ //   db     0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998, converted to amd 64 by Gilles Vollant 2005",0dh,0ah,0
+
+
+match_init:
+  ret 0
+
+

contrib/infback9/README

@@ -0,0 +1 @@
+See infback9.h for what this is and how to use it.

contrib/infback9/infback9.c

@@ -0,0 +1,617 @@
+/* infback9.c -- inflate deflate64 data using a call-back interface
+ * Copyright (C) 1995-2008 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "infback9.h"
+#include "inftree9.h"
+#include "inflate9.h"
+
+#define WSIZE 65536UL
+
+/*
+   strm provides memory allocation functions in zalloc and zfree, or
+   Z_NULL to use the library memory allocation functions.
+
+   window is a user-supplied window and output buffer that is 64K bytes.
+ */
+int ZEXPORT inflateBack9Init_(strm, window, version, stream_size)
+z_stream FAR *strm;
+unsigned char FAR *window;
+const char *version;
+int stream_size;
+{
+    struct inflate_state FAR *state;
+
+    if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
+        stream_size != (int)(sizeof(z_stream)))
+        return Z_VERSION_ERROR;
+    if (strm == Z_NULL || window == Z_NULL)
+        return Z_STREAM_ERROR;
+    strm->msg = Z_NULL;                 /* in case we return an error */
+    if (strm->zalloc == (alloc_func)0) {
+        strm->zalloc = zcalloc;
+        strm->opaque = (voidpf)0;
+    }
+    if (strm->zfree == (free_func)0) strm->zfree = zcfree;
+    state = (struct inflate_state FAR *)ZALLOC(strm, 1,
+                                               sizeof(struct inflate_state));
+    if (state == Z_NULL) return Z_MEM_ERROR;
+    Tracev((stderr, "inflate: allocated\n"));
+    strm->state = (voidpf)state;
+    state->window = window;
+    return Z_OK;
+}
+
+/*
+   Build and output length and distance decoding tables for fixed code
+   decoding.
+ */
+#ifdef MAKEFIXED
+#include <stdio.h>
+
+void makefixed9(void)
+{
+    unsigned sym, bits, low, size;
+    code *next, *lenfix, *distfix;
+    struct inflate_state state;
+    code fixed[544];
+
+    /* literal/length table */
+    sym = 0;
+    while (sym < 144) state.lens[sym++] = 8;
+    while (sym < 256) state.lens[sym++] = 9;
+    while (sym < 280) state.lens[sym++] = 7;
+    while (sym < 288) state.lens[sym++] = 8;
+    next = fixed;
+    lenfix = next;
+    bits = 9;
+    inflate_table9(LENS, state.lens, 288, &(next), &(bits), state.work);
+
+    /* distance table */
+    sym = 0;
+    while (sym < 32) state.lens[sym++] = 5;
+    distfix = next;
+    bits = 5;
+    inflate_table9(DISTS, state.lens, 32, &(next), &(bits), state.work);
+
+    /* write tables */
+    puts("    /* inffix9.h -- table for decoding deflate64 fixed codes");
+    puts("     * Generated automatically by makefixed9().");
+    puts("     */");
+    puts("");
+    puts("    /* WARNING: this file should *not* be used by applications.");
+    puts("       It is part of the implementation of this library and is");
+    puts("       subject to change. Applications should only use zlib.h.");
+    puts("     */");
+    puts("");
+    size = 1U << 9;
+    printf("    static const code lenfix[%u] = {", size);
+    low = 0;
+    for (;;) {
+        if ((low % 6) == 0) printf("\n        ");
+        printf("{%u,%u,%d}", lenfix[low].op, lenfix[low].bits,
+               lenfix[low].val);
+        if (++low == size) break;
+        putchar(',');
+    }
+    puts("\n    };");
+    size = 1U << 5;
+    printf("\n    static const code distfix[%u] = {", size);
+    low = 0;
+    for (;;) {
+        if ((low % 5) == 0) printf("\n        ");
+        printf("{%u,%u,%d}", distfix[low].op, distfix[low].bits,
+               distfix[low].val);
+        if (++low == size) break;
+        putchar(',');
+    }
+    puts("\n    };");
+}
+#endif /* MAKEFIXED */
+
+/* Macros for inflateBack(): */
+
+/* Clear the input bit accumulator */
+#define INITBITS() \
+    do { \
+        hold = 0; \
+        bits = 0; \
+    } while (0)
+
+/* Assure that some input is available.  If input is requested, but denied,
+   then return a Z_BUF_ERROR from inflateBack(). */
+#define PULL() \
+    do { \
+        if (have == 0) { \
+            have = in(in_desc, &next); \
+            if (have == 0) { \
+                next = Z_NULL; \
+                ret = Z_BUF_ERROR; \
+                goto inf_leave; \
+            } \
+        } \
+    } while (0)
+
+/* Get a byte of input into the bit accumulator, or return from inflateBack()
+   with an error if there is no input available. */
+#define PULLBYTE() \
+    do { \
+        PULL(); \
+        have--; \
+        hold += (unsigned long)(*next++) << bits; \
+        bits += 8; \
+    } while (0)
+
+/* Assure that there are at least n bits in the bit accumulator.  If there is
+   not enough available input to do that, then return from inflateBack() with
+   an error. */
+#define NEEDBITS(n) \
+    do { \
+        while (bits < (unsigned)(n)) \
+            PULLBYTE(); \
+    } while (0)
+
+/* Return the low n bits of the bit accumulator (n <= 16) */
+#define BITS(n) \
+    ((unsigned)hold & ((1U << (n)) - 1))
+
+/* Remove n bits from the bit accumulator */
+#define DROPBITS(n) \
+    do { \
+        hold >>= (n); \
+        bits -= (unsigned)(n); \
+    } while (0)
+
+/* Remove zero to seven bits as needed to go to a byte boundary */
+#define BYTEBITS() \
+    do { \
+        hold >>= bits & 7; \
+        bits -= bits & 7; \
+    } while (0)
+
+/* Assure that some output space is available, by writing out the window
+   if it's full.  If the write fails, return from inflateBack() with a
+   Z_BUF_ERROR. */
+#define ROOM() \
+    do { \
+        if (left == 0) { \
+            put = window; \
+            left = WSIZE; \
+            wrap = 1; \
+            if (out(out_desc, put, (unsigned)left)) { \
+                ret = Z_BUF_ERROR; \
+                goto inf_leave; \
+            } \
+        } \
+    } while (0)
+
+/*
+   strm provides the memory allocation functions and window buffer on input,
+   and provides information on the unused input on return.  For Z_DATA_ERROR
+   returns, strm will also provide an error message.
+
+   in() and out() are the call-back input and output functions.  When
+   inflateBack() needs more input, it calls in().  When inflateBack() has
+   filled the window with output, or when it completes with data in the
+   window, it calls out() to write out the data.  The application must not
+   change the provided input until in() is called again or inflateBack()
+   returns.  The application must not change the window/output buffer until
+   inflateBack() returns.
+
+   in() and out() are called with a descriptor parameter provided in the
+   inflateBack() call.  This parameter can be a structure that provides the
+   information required to do the read or write, as well as accumulated
+   information on the input and output such as totals and check values.
+
+   in() should return zero on failure.  out() should return non-zero on
+   failure.  If either in() or out() fails, than inflateBack() returns a
+   Z_BUF_ERROR.  strm->next_in can be checked for Z_NULL to see whether it
+   was in() or out() that caused in the error.  Otherwise,  inflateBack()
+   returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format
+   error, or Z_MEM_ERROR if it could not allocate memory for the state.
+   inflateBack() can also return Z_STREAM_ERROR if the input parameters
+   are not correct, i.e. strm is Z_NULL or the state was not initialized.
+ */
+int ZEXPORT inflateBack9(strm, in, in_desc, out, out_desc)
+z_stream FAR *strm;
+in_func in;
+void FAR *in_desc;
+out_func out;
+void FAR *out_desc;
+{
+    struct inflate_state FAR *state;
+    unsigned char FAR *next;    /* next input */
+    unsigned char FAR *put;     /* next output */
+    unsigned have;              /* available input */
+    unsigned long left;         /* available output */
+    inflate_mode mode;          /* current inflate mode */
+    int lastblock;              /* true if processing last block */
+    int wrap;                   /* true if the window has wrapped */
+    unsigned long write;        /* window write index */
+    unsigned char FAR *window;  /* allocated sliding window, if needed */
+    unsigned long hold;         /* bit buffer */
+    unsigned bits;              /* bits in bit buffer */
+    unsigned extra;             /* extra bits needed */
+    unsigned long length;       /* literal or length of data to copy */
+    unsigned long offset;       /* distance back to copy string from */
+    unsigned long copy;         /* number of stored or match bytes to copy */
+    unsigned char FAR *from;    /* where to copy match bytes from */
+    code const FAR *lencode;    /* starting table for length/literal codes */
+    code const FAR *distcode;   /* starting table for distance codes */
+    unsigned lenbits;           /* index bits for lencode */
+    unsigned distbits;          /* index bits for distcode */
+    code here;                  /* current decoding table entry */
+    code last;                  /* parent table entry */
+    unsigned len;               /* length to copy for repeats, bits to drop */
+    int ret;                    /* return code */
+    static const unsigned short order[19] = /* permutation of code lengths */
+        {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15};
+#include "inffix9.h"
+
+    /* Check that the strm exists and that the state was initialized */
+    if (strm == Z_NULL || strm->state == Z_NULL)
+        return Z_STREAM_ERROR;
+    state = (struct inflate_state FAR *)strm->state;
+
+    /* Reset the state */
+    strm->msg = Z_NULL;
+    mode = TYPE;
+    lastblock = 0;
+    write = 0;
+    wrap = 0;
+    window = state->window;
+    next = strm->next_in;
+    have = next != Z_NULL ? strm->avail_in : 0;
+    hold = 0;
+    bits = 0;
+    put = window;
+    left = WSIZE;
+    lencode = Z_NULL;
+    distcode = Z_NULL;
+
+    /* Inflate until end of block marked as last */
+    for (;;)
+        switch (mode) {
+        case TYPE:
+            /* determine and dispatch block type */
+            if (lastblock) {
+                BYTEBITS();
+                mode = DONE;
+                break;
+            }
+            NEEDBITS(3);
+            lastblock = BITS(1);
+            DROPBITS(1);
+            switch (BITS(2)) {
+            case 0:                             /* stored block */
+                Tracev((stderr, "inflate:     stored block%s\n",
+                        lastblock ? " (last)" : ""));
+                mode = STORED;
+                break;
+            case 1:                             /* fixed block */
+                lencode = lenfix;
+                lenbits = 9;
+                distcode = distfix;
+                distbits = 5;
+                Tracev((stderr, "inflate:     fixed codes block%s\n",
+                        lastblock ? " (last)" : ""));
+                mode = LEN;                     /* decode codes */
+                break;
+            case 2:                             /* dynamic block */
+                Tracev((stderr, "inflate:     dynamic codes block%s\n",
+                        lastblock ? " (last)" : ""));
+                mode = TABLE;
+                break;
+            case 3:
+                strm->msg = (char *)"invalid block type";
+                mode = BAD;
+            }
+            DROPBITS(2);
+            break;
+
+        case STORED:
+            /* get and verify stored block length */
+            BYTEBITS();                         /* go to byte boundary */
+            NEEDBITS(32);
+            if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) {
+                strm->msg = (char *)"invalid stored block lengths";
+                mode = BAD;
+                break;
+            }
+            length = (unsigned)hold & 0xffff;
+            Tracev((stderr, "inflate:       stored length %lu\n",
+                    length));
+            INITBITS();
+
+            /* copy stored block from input to output */
+            while (length != 0) {
+                copy = length;
+                PULL();
+                ROOM();
+                if (copy > have) copy = have;
+                if (copy > left) copy = left;
+                zmemcpy(put, next, copy);
+                have -= copy;
+                next += copy;
+                left -= copy;
+                put += copy;
+                length -= copy;
+            }
+            Tracev((stderr, "inflate:       stored end\n"));
+            mode = TYPE;
+            break;
+
+        case TABLE:
+            /* get dynamic table entries descriptor */
+            NEEDBITS(14);
+            state->nlen = BITS(5) + 257;
+            DROPBITS(5);
+            state->ndist = BITS(5) + 1;
+            DROPBITS(5);
+            state->ncode = BITS(4) + 4;
+            DROPBITS(4);
+            if (state->nlen > 286) {
+                strm->msg = (char *)"too many length symbols";
+                mode = BAD;
+                break;
+            }
+            Tracev((stderr, "inflate:       table sizes ok\n"));
+
+            /* get code length code lengths (not a typo) */
+            state->have = 0;
+            while (state->have < state->ncode) {
+                NEEDBITS(3);
+                state->lens[order[state->have++]] = (unsigned short)BITS(3);
+                DROPBITS(3);
+            }
+            while (state->have < 19)
+                state->lens[order[state->have++]] = 0;
+            state->next = state->codes;
+            lencode = (code const FAR *)(state->next);
+            lenbits = 7;
+            ret = inflate_table9(CODES, state->lens, 19, &(state->next),
+                                &(lenbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid code lengths set";
+                mode = BAD;
+                break;
+            }
+            Tracev((stderr, "inflate:       code lengths ok\n"));
+
+            /* get length and distance code code lengths */
+            state->have = 0;
+            while (state->have < state->nlen + state->ndist) {
+                for (;;) {
+                    here = lencode[BITS(lenbits)];
+                    if ((unsigned)(here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                if (here.val < 16) {
+                    NEEDBITS(here.bits);
+                    DROPBITS(here.bits);
+                    state->lens[state->have++] = here.val;
+                }
+                else {
+                    if (here.val == 16) {
+                        NEEDBITS(here.bits + 2);
+                        DROPBITS(here.bits);
+                        if (state->have == 0) {
+                            strm->msg = (char *)"invalid bit length repeat";
+                            mode = BAD;
+                            break;
+                        }
+                        len = (unsigned)(state->lens[state->have - 1]);
+                        copy = 3 + BITS(2);
+                        DROPBITS(2);
+                    }
+                    else if (here.val == 17) {
+                        NEEDBITS(here.bits + 3);
+                        DROPBITS(here.bits);
+                        len = 0;
+                        copy = 3 + BITS(3);
+                        DROPBITS(3);
+                    }
+                    else {
+                        NEEDBITS(here.bits + 7);
+                        DROPBITS(here.bits);
+                        len = 0;
+                        copy = 11 + BITS(7);
+                        DROPBITS(7);
+                    }
+                    if (state->have + copy > state->nlen + state->ndist) {
+                        strm->msg = (char *)"invalid bit length repeat";
+                        mode = BAD;
+                        break;
+                    }
+                    while (copy--)
+                        state->lens[state->have++] = (unsigned short)len;
+                }
+            }
+
+            /* handle error breaks in while */
+            if (mode == BAD) break;
+
+            /* check for end-of-block code (better have one) */
+            if (state->lens[256] == 0) {
+                strm->msg = (char *)"invalid code -- missing end-of-block";
+                mode = BAD;
+                break;
+            }
+
+            /* build code tables -- note: do not change the lenbits or distbits
+               values here (9 and 6) without reading the comments in inftree9.h
+               concerning the ENOUGH constants, which depend on those values */
+            state->next = state->codes;
+            lencode = (code const FAR *)(state->next);
+            lenbits = 9;
+            ret = inflate_table9(LENS, state->lens, state->nlen,
+                            &(state->next), &(lenbits), state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid literal/lengths set";
+                mode = BAD;
+                break;
+            }
+            distcode = (code const FAR *)(state->next);
+            distbits = 6;
+            ret = inflate_table9(DISTS, state->lens + state->nlen,
+                            state->ndist, &(state->next), &(distbits),
+                            state->work);
+            if (ret) {
+                strm->msg = (char *)"invalid distances set";
+                mode = BAD;
+                break;
+            }
+            Tracev((stderr, "inflate:       codes ok\n"));
+            mode = LEN;
+
+        case LEN:
+            /* get a literal, length, or end-of-block code */
+            for (;;) {
+                here = lencode[BITS(lenbits)];
+                if ((unsigned)(here.bits) <= bits) break;
+                PULLBYTE();
+            }
+            if (here.op && (here.op & 0xf0) == 0) {
+                last = here;
+                for (;;) {
+                    here = lencode[last.val +
+                            (BITS(last.bits + last.op) >> last.bits)];
+                    if ((unsigned)(last.bits + here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                DROPBITS(last.bits);
+            }
+            DROPBITS(here.bits);
+            length = (unsigned)here.val;
+
+            /* process literal */
+            if (here.op == 0) {
+                Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+                        "inflate:         literal '%c'\n" :
+                        "inflate:         literal 0x%02x\n", here.val));
+                ROOM();
+                *put++ = (unsigned char)(length);
+                left--;
+                mode = LEN;
+                break;
+            }
+
+            /* process end of block */
+            if (here.op & 32) {
+                Tracevv((stderr, "inflate:         end of block\n"));
+                mode = TYPE;
+                break;
+            }
+
+            /* invalid code */
+            if (here.op & 64) {
+                strm->msg = (char *)"invalid literal/length code";
+                mode = BAD;
+                break;
+            }
+
+            /* length code -- get extra bits, if any */
+            extra = (unsigned)(here.op) & 31;
+            if (extra != 0) {
+                NEEDBITS(extra);
+                length += BITS(extra);
+                DROPBITS(extra);
+            }
+            Tracevv((stderr, "inflate:         length %lu\n", length));
+
+            /* get distance code */
+            for (;;) {
+                here = distcode[BITS(distbits)];
+                if ((unsigned)(here.bits) <= bits) break;
+                PULLBYTE();
+            }
+            if ((here.op & 0xf0) == 0) {
+                last = here;
+                for (;;) {
+                    here = distcode[last.val +
+                            (BITS(last.bits + last.op) >> last.bits)];
+                    if ((unsigned)(last.bits + here.bits) <= bits) break;
+                    PULLBYTE();
+                }
+                DROPBITS(last.bits);
+            }
+            DROPBITS(here.bits);
+            if (here.op & 64) {
+                strm->msg = (char *)"invalid distance code";
+                mode = BAD;
+                break;
+            }
+            offset = (unsigned)here.val;
+
+            /* get distance extra bits, if any */
+            extra = (unsigned)(here.op) & 15;
+            if (extra != 0) {
+                NEEDBITS(extra);
+                offset += BITS(extra);
+                DROPBITS(extra);
+            }
+            if (offset > WSIZE - (wrap ? 0: left)) {
+                strm->msg = (char *)"invalid distance too far back";
+                mode = BAD;
+                break;
+            }
+            Tracevv((stderr, "inflate:         distance %lu\n", offset));
+
+            /* copy match from window to output */
+            do {
+                ROOM();
+                copy = WSIZE - offset;
+                if (copy < left) {
+                    from = put + copy;
+                    copy = left - copy;
+                }
+                else {
+                    from = put - offset;
+                    copy = left;
+                }
+                if (copy > length) copy = length;
+                length -= copy;
+                left -= copy;
+                do {
+                    *put++ = *from++;
+                } while (--copy);
+            } while (length != 0);
+            break;
+
+        case DONE:
+            /* inflate stream terminated properly -- write leftover output */
+            ret = Z_STREAM_END;
+            if (left < WSIZE) {
+                if (out(out_desc, window, (unsigned)(WSIZE - left)))
+                    ret = Z_BUF_ERROR;
+            }
+            goto inf_leave;
+
+        case BAD:
+            ret = Z_DATA_ERROR;
+            goto inf_leave;
+
+        default:                /* can't happen, but makes compilers happy */
+            ret = Z_STREAM_ERROR;
+            goto inf_leave;
+        }
+
+    /* Return unused input */
+  inf_leave:
+    strm->next_in = next;
+    strm->avail_in = have;
+    return ret;
+}
+
+int ZEXPORT inflateBack9End(strm)
+z_stream FAR *strm;
+{
+    if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
+        return Z_STREAM_ERROR;
+    ZFREE(strm, strm->state);
+    strm->state = Z_NULL;
+    Tracev((stderr, "inflate: end\n"));
+    return Z_OK;
+}

contrib/infback9/infback9.h

@@ -0,0 +1,37 @@
+/* infback9.h -- header for using inflateBack9 functions
+ * Copyright (C) 2003 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ * This header file and associated patches provide a decoder for PKWare's
+ * undocumented deflate64 compression method (method 9).  Use with infback9.c,
+ * inftree9.h, inftree9.c, and inffix9.h.  These patches are not supported.
+ * This should be compiled with zlib, since it uses zutil.h and zutil.o.
+ * This code has not yet been tested on 16-bit architectures.  See the
+ * comments in zlib.h for inflateBack() usage.  These functions are used
+ * identically, except that there is no windowBits parameter, and a 64K
+ * window must be provided.  Also if int's are 16 bits, then a zero for
+ * the third parameter of the "out" function actually means 65536UL.
+ * zlib.h must be included before this header file.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+ZEXTERN int ZEXPORT inflateBack9 OF((z_stream FAR *strm,
+                                    in_func in, void FAR *in_desc,
+                                    out_func out, void FAR *out_desc));
+ZEXTERN int ZEXPORT inflateBack9End OF((z_stream FAR *strm));
+ZEXTERN int ZEXPORT inflateBack9Init_ OF((z_stream FAR *strm,
+                                         unsigned char FAR *window,
+                                         const char *version,
+                                         int stream_size));
+#define inflateBack9Init(strm, window) \
+        inflateBack9Init_((strm), (window), \
+        ZLIB_VERSION, sizeof(z_stream))
+
+#ifdef __cplusplus
+}
+#endif

contrib/infback9/inffix9.h

@@ -0,0 +1,107 @@
+    /* inffix9.h -- table for decoding deflate64 fixed codes
+     * Generated automatically by makefixed9().
+     */
+
+    /* WARNING: this file should *not* be used by applications.
+       It is part of the implementation of this library and is
+       subject to change. Applications should only use zlib.h.
+     */
+
+    static const code lenfix[512] = {
+        {96,7,0},{0,8,80},{0,8,16},{132,8,115},{130,7,31},{0,8,112},
+        {0,8,48},{0,9,192},{128,7,10},{0,8,96},{0,8,32},{0,9,160},
+        {0,8,0},{0,8,128},{0,8,64},{0,9,224},{128,7,6},{0,8,88},
+        {0,8,24},{0,9,144},{131,7,59},{0,8,120},{0,8,56},{0,9,208},
+        {129,7,17},{0,8,104},{0,8,40},{0,9,176},{0,8,8},{0,8,136},
+        {0,8,72},{0,9,240},{128,7,4},{0,8,84},{0,8,20},{133,8,227},
+        {131,7,43},{0,8,116},{0,8,52},{0,9,200},{129,7,13},{0,8,100},
+        {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},
+        {128,7,8},{0,8,92},{0,8,28},{0,9,152},{132,7,83},{0,8,124},
+        {0,8,60},{0,9,216},{130,7,23},{0,8,108},{0,8,44},{0,9,184},
+        {0,8,12},{0,8,140},{0,8,76},{0,9,248},{128,7,3},{0,8,82},
+        {0,8,18},{133,8,163},{131,7,35},{0,8,114},{0,8,50},{0,9,196},
+        {129,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2},{0,8,130},
+        {0,8,66},{0,9,228},{128,7,7},{0,8,90},{0,8,26},{0,9,148},
+        {132,7,67},{0,8,122},{0,8,58},{0,9,212},{130,7,19},{0,8,106},
+        {0,8,42},{0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},
+        {128,7,5},{0,8,86},{0,8,22},{65,8,0},{131,7,51},{0,8,118},
+        {0,8,54},{0,9,204},{129,7,15},{0,8,102},{0,8,38},{0,9,172},
+        {0,8,6},{0,8,134},{0,8,70},{0,9,236},{128,7,9},{0,8,94},
+        {0,8,30},{0,9,156},{132,7,99},{0,8,126},{0,8,62},{0,9,220},
+        {130,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142},
+        {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{133,8,131},
+        {130,7,31},{0,8,113},{0,8,49},{0,9,194},{128,7,10},{0,8,97},
+        {0,8,33},{0,9,162},{0,8,1},{0,8,129},{0,8,65},{0,9,226},
+        {128,7,6},{0,8,89},{0,8,25},{0,9,146},{131,7,59},{0,8,121},
+        {0,8,57},{0,9,210},{129,7,17},{0,8,105},{0,8,41},{0,9,178},
+        {0,8,9},{0,8,137},{0,8,73},{0,9,242},{128,7,4},{0,8,85},
+        {0,8,21},{144,8,3},{131,7,43},{0,8,117},{0,8,53},{0,9,202},
+        {129,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},
+        {0,8,69},{0,9,234},{128,7,8},{0,8,93},{0,8,29},{0,9,154},
+        {132,7,83},{0,8,125},{0,8,61},{0,9,218},{130,7,23},{0,8,109},
+        {0,8,45},{0,9,186},{0,8,13},{0,8,141},{0,8,77},{0,9,250},
+        {128,7,3},{0,8,83},{0,8,19},{133,8,195},{131,7,35},{0,8,115},
+        {0,8,51},{0,9,198},{129,7,11},{0,8,99},{0,8,35},{0,9,166},
+        {0,8,3},{0,8,131},{0,8,67},{0,9,230},{128,7,7},{0,8,91},
+        {0,8,27},{0,9,150},{132,7,67},{0,8,123},{0,8,59},{0,9,214},
+        {130,7,19},{0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},
+        {0,8,75},{0,9,246},{128,7,5},{0,8,87},{0,8,23},{77,8,0},
+        {131,7,51},{0,8,119},{0,8,55},{0,9,206},{129,7,15},{0,8,103},
+        {0,8,39},{0,9,174},{0,8,7},{0,8,135},{0,8,71},{0,9,238},
+        {128,7,9},{0,8,95},{0,8,31},{0,9,158},{132,7,99},{0,8,127},
+        {0,8,63},{0,9,222},{130,7,27},{0,8,111},{0,8,47},{0,9,190},
+        {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},
+        {0,8,16},{132,8,115},{130,7,31},{0,8,112},{0,8,48},{0,9,193},
+        {128,7,10},{0,8,96},{0,8,32},{0,9,161},{0,8,0},{0,8,128},
+        {0,8,64},{0,9,225},{128,7,6},{0,8,88},{0,8,24},{0,9,145},
+        {131,7,59},{0,8,120},{0,8,56},{0,9,209},{129,7,17},{0,8,104},
+        {0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72},{0,9,241},
+        {128,7,4},{0,8,84},{0,8,20},{133,8,227},{131,7,43},{0,8,116},
+        {0,8,52},{0,9,201},{129,7,13},{0,8,100},{0,8,36},{0,9,169},
+        {0,8,4},{0,8,132},{0,8,68},{0,9,233},{128,7,8},{0,8,92},
+        {0,8,28},{0,9,153},{132,7,83},{0,8,124},{0,8,60},{0,9,217},
+        {130,7,23},{0,8,108},{0,8,44},{0,9,185},{0,8,12},{0,8,140},
+        {0,8,76},{0,9,249},{128,7,3},{0,8,82},{0,8,18},{133,8,163},
+        {131,7,35},{0,8,114},{0,8,50},{0,9,197},{129,7,11},{0,8,98},
+        {0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229},
+        {128,7,7},{0,8,90},{0,8,26},{0,9,149},{132,7,67},{0,8,122},
+        {0,8,58},{0,9,213},{130,7,19},{0,8,106},{0,8,42},{0,9,181},
+        {0,8,10},{0,8,138},{0,8,74},{0,9,245},{128,7,5},{0,8,86},
+        {0,8,22},{65,8,0},{131,7,51},{0,8,118},{0,8,54},{0,9,205},
+        {129,7,15},{0,8,102},{0,8,38},{0,9,173},{0,8,6},{0,8,134},
+        {0,8,70},{0,9,237},{128,7,9},{0,8,94},{0,8,30},{0,9,157},
+        {132,7,99},{0,8,126},{0,8,62},{0,9,221},{130,7,27},{0,8,110},
+        {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},
+        {96,7,0},{0,8,81},{0,8,17},{133,8,131},{130,7,31},{0,8,113},
+        {0,8,49},{0,9,195},{128,7,10},{0,8,97},{0,8,33},{0,9,163},
+        {0,8,1},{0,8,129},{0,8,65},{0,9,227},{128,7,6},{0,8,89},
+        {0,8,25},{0,9,147},{131,7,59},{0,8,121},{0,8,57},{0,9,211},
+        {129,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9},{0,8,137},
+        {0,8,73},{0,9,243},{128,7,4},{0,8,85},{0,8,21},{144,8,3},
+        {131,7,43},{0,8,117},{0,8,53},{0,9,203},{129,7,13},{0,8,101},
+        {0,8,37},{0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},
+        {128,7,8},{0,8,93},{0,8,29},{0,9,155},{132,7,83},{0,8,125},
+        {0,8,61},{0,9,219},{130,7,23},{0,8,109},{0,8,45},{0,9,187},
+        {0,8,13},{0,8,141},{0,8,77},{0,9,251},{128,7,3},{0,8,83},
+        {0,8,19},{133,8,195},{131,7,35},{0,8,115},{0,8,51},{0,9,199},
+        {129,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131},
+        {0,8,67},{0,9,231},{128,7,7},{0,8,91},{0,8,27},{0,9,151},
+        {132,7,67},{0,8,123},{0,8,59},{0,9,215},{130,7,19},{0,8,107},
+        {0,8,43},{0,9,183},{0,8,11},{0,8,139},{0,8,75},{0,9,247},
+        {128,7,5},{0,8,87},{0,8,23},{77,8,0},{131,7,51},{0,8,119},
+        {0,8,55},{0,9,207},{129,7,15},{0,8,103},{0,8,39},{0,9,175},
+        {0,8,7},{0,8,135},{0,8,71},{0,9,239},{128,7,9},{0,8,95},
+        {0,8,31},{0,9,159},{132,7,99},{0,8,127},{0,8,63},{0,9,223},
+        {130,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},
+        {0,8,79},{0,9,255}
+    };
+
+    static const code distfix[32] = {
+        {128,5,1},{135,5,257},{131,5,17},{139,5,4097},{129,5,5},
+        {137,5,1025},{133,5,65},{141,5,16385},{128,5,3},{136,5,513},
+        {132,5,33},{140,5,8193},{130,5,9},{138,5,2049},{134,5,129},
+        {142,5,32769},{128,5,2},{135,5,385},{131,5,25},{139,5,6145},
+        {129,5,7},{137,5,1537},{133,5,97},{141,5,24577},{128,5,4},
+        {136,5,769},{132,5,49},{140,5,12289},{130,5,13},{138,5,3073},
+        {134,5,193},{142,5,49153}
+    };

contrib/infback9/inflate9.h

@@ -0,0 +1,47 @@
+/* inflate9.h -- internal inflate state definition
+ * Copyright (C) 1995-2003 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* Possible inflate modes between inflate() calls */
+typedef enum {
+        TYPE,       /* i: waiting for type bits, including last-flag bit */
+        STORED,     /* i: waiting for stored size (length and complement) */
+        TABLE,      /* i: waiting for dynamic block table lengths */
+            LEN,        /* i: waiting for length/lit code */
+    DONE,       /* finished check, done -- remain here until reset */
+    BAD         /* got a data error -- remain here until reset */
+} inflate_mode;
+
+/*
+    State transitions between above modes -
+
+    (most modes can go to the BAD mode -- not shown for clarity)
+
+    Read deflate blocks:
+            TYPE -> STORED or TABLE or LEN or DONE
+            STORED -> TYPE
+            TABLE -> LENLENS -> CODELENS -> LEN
+    Read deflate codes:
+                LEN -> LEN or TYPE
+ */
+
+/* state maintained between inflate() calls.  Approximately 7K bytes. */
+struct inflate_state {
+        /* sliding window */
+    unsigned char FAR *window;  /* allocated sliding window, if needed */
+        /* dynamic table building */
+    unsigned ncode;             /* number of code length code lengths */
+    unsigned nlen;              /* number of length code lengths */
+    unsigned ndist;             /* number of distance code lengths */
+    unsigned have;              /* number of code lengths in lens[] */
+    code FAR *next;             /* next available space in codes[] */
+    unsigned short lens[320];   /* temporary storage for code lengths */
+    unsigned short work[288];   /* work area for code table building */
+    code codes[ENOUGH];         /* space for code tables */
+};

contrib/infback9/inftree9.c

@@ -0,0 +1,324 @@
+/* inftree9.c -- generate Huffman trees for efficient decoding
+ * Copyright (C) 1995-2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftree9.h"
+
+#define MAXBITS 15
+
+const char inflate9_copyright[] =
+   " inflate9 1.2.5 Copyright 1995-2010 Mark Adler ";
+/*
+  If you use the zlib library in a product, an acknowledgment is welcome
+  in the documentation of your product. If for some reason you cannot
+  include such an acknowledgment, I would appreciate that you keep this
+  copyright string in the executable of your product.
+ */
+
+/*
+   Build a set of tables to decode the provided canonical Huffman code.
+   The code lengths are lens[0..codes-1].  The result starts at *table,
+   whose indices are 0..2^bits-1.  work is a writable array of at least
+   lens shorts, which is used as a work area.  type is the type of code
+   to be generated, CODES, LENS, or DISTS.  On return, zero is success,
+   -1 is an invalid code, and +1 means that ENOUGH isn't enough.  table
+   on return points to the next available entry's address.  bits is the
+   requested root table index bits, and on return it is the actual root
+   table index bits.  It will differ if the request is greater than the
+   longest code or if it is less than the shortest code.
+ */
+int inflate_table9(type, lens, codes, table, bits, work)
+codetype type;
+unsigned short FAR *lens;
+unsigned codes;
+code FAR * FAR *table;
+unsigned FAR *bits;
+unsigned short FAR *work;
+{
+    unsigned len;               /* a code's length in bits */
+    unsigned sym;               /* index of code symbols */
+    unsigned min, max;          /* minimum and maximum code lengths */
+    unsigned root;              /* number of index bits for root table */
+    unsigned curr;              /* number of index bits for current table */
+    unsigned drop;              /* code bits to drop for sub-table */
+    int left;                   /* number of prefix codes available */
+    unsigned used;              /* code entries in table used */
+    unsigned huff;              /* Huffman code */
+    unsigned incr;              /* for incrementing code, index */
+    unsigned fill;              /* index for replicating entries */
+    unsigned low;               /* low bits for current root entry */
+    unsigned mask;              /* mask for low root bits */
+    code this;                  /* table entry for duplication */
+    code FAR *next;             /* next available space in table */
+    const unsigned short FAR *base;     /* base value table to use */
+    const unsigned short FAR *extra;    /* extra bits table to use */
+    int end;                    /* use base and extra for symbol > end */
+    unsigned short count[MAXBITS+1];    /* number of codes of each length */
+    unsigned short offs[MAXBITS+1];     /* offsets in table for each length */
+    static const unsigned short lbase[31] = { /* Length codes 257..285 base */
+        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17,
+        19, 23, 27, 31, 35, 43, 51, 59, 67, 83, 99, 115,
+        131, 163, 195, 227, 3, 0, 0};
+    static const unsigned short lext[31] = { /* Length codes 257..285 extra */
+        128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
+        130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
+        133, 133, 133, 133, 144, 73, 195};
+    static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
+        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
+        65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,
+        4097, 6145, 8193, 12289, 16385, 24577, 32769, 49153};
+    static const unsigned short dext[32] = { /* Distance codes 0..31 extra */
+        128, 128, 128, 128, 129, 129, 130, 130, 131, 131, 132, 132,
+        133, 133, 134, 134, 135, 135, 136, 136, 137, 137, 138, 138,
+        139, 139, 140, 140, 141, 141, 142, 142};
+
+    /*
+       Process a set of code lengths to create a canonical Huffman code.  The
+       code lengths are lens[0..codes-1].  Each length corresponds to the
+       symbols 0..codes-1.  The Huffman code is generated by first sorting the
+       symbols by length from short to long, and retaining the symbol order
+       for codes with equal lengths.  Then the code starts with all zero bits
+       for the first code of the shortest length, and the codes are integer
+       increments for the same length, and zeros are appended as the length
+       increases.  For the deflate format, these bits are stored backwards
+       from their more natural integer increment ordering, and so when the
+       decoding tables are built in the large loop below, the integer codes
+       are incremented backwards.
+
+       This routine assumes, but does not check, that all of the entries in
+       lens[] are in the range 0..MAXBITS.  The caller must assure this.
+       1..MAXBITS is interpreted as that code length.  zero means that that
+       symbol does not occur in this code.
+
+       The codes are sorted by computing a count of codes for each length,
+       creating from that a table of starting indices for each length in the
+       sorted table, and then entering the symbols in order in the sorted
+       table.  The sorted table is work[], with that space being provided by
+       the caller.
+
+       The length counts are used for other purposes as well, i.e. finding
+       the minimum and maximum length codes, determining if there are any
+       codes at all, checking for a valid set of lengths, and looking ahead
+       at length counts to determine sub-table sizes when building the
+       decoding tables.
+     */
+
+    /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
+    for (len = 0; len <= MAXBITS; len++)
+        count[len] = 0;
+    for (sym = 0; sym < codes; sym++)
+        count[lens[sym]]++;
+
+    /* bound code lengths, force root to be within code lengths */
+    root = *bits;
+    for (max = MAXBITS; max >= 1; max--)
+        if (count[max] != 0) break;
+    if (root > max) root = max;
+    if (max == 0) return -1;            /* no codes! */
+    for (min = 1; min <= MAXBITS; min++)
+        if (count[min] != 0) break;
+    if (root < min) root = min;
+
+    /* check for an over-subscribed or incomplete set of lengths */
+    left = 1;
+    for (len = 1; len <= MAXBITS; len++) {
+        left <<= 1;
+        left -= count[len];
+        if (left < 0) return -1;        /* over-subscribed */
+    }
+    if (left > 0 && (type == CODES || max != 1))
+        return -1;                      /* incomplete set */
+
+    /* generate offsets into symbol table for each length for sorting */
+    offs[1] = 0;
+    for (len = 1; len < MAXBITS; len++)
+        offs[len + 1] = offs[len] + count[len];
+
+    /* sort symbols by length, by symbol order within each length */
+    for (sym = 0; sym < codes; sym++)
+        if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
+
+    /*
+       Create and fill in decoding tables.  In this loop, the table being
+       filled is at next and has curr index bits.  The code being used is huff
+       with length len.  That code is converted to an index by dropping drop
+       bits off of the bottom.  For codes where len is less than drop + curr,
+       those top drop + curr - len bits are incremented through all values to
+       fill the table with replicated entries.
+
+       root is the number of index bits for the root table.  When len exceeds
+       root, sub-tables are created pointed to by the root entry with an index
+       of the low root bits of huff.  This is saved in low to check for when a
+       new sub-table should be started.  drop is zero when the root table is
+       being filled, and drop is root when sub-tables are being filled.
+
+       When a new sub-table is needed, it is necessary to look ahead in the
+       code lengths to determine what size sub-table is needed.  The length
+       counts are used for this, and so count[] is decremented as codes are
+       entered in the tables.
+
+       used keeps track of how many table entries have been allocated from the
+       provided *table space.  It is checked for LENS and DIST tables against
+       the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in
+       the initial root table size constants.  See the comments in inftree9.h
+       for more information.
+
+       sym increments through all symbols, and the loop terminates when
+       all codes of length max, i.e. all codes, have been processed.  This
+       routine permits incomplete codes, so another loop after this one fills
+       in the rest of the decoding tables with invalid code markers.
+     */
+
+    /* set up for code type */
+    switch (type) {
+    case CODES:
+        base = extra = work;    /* dummy value--not used */
+        end = 19;
+        break;
+    case LENS:
+        base = lbase;
+        base -= 257;
+        extra = lext;
+        extra -= 257;
+        end = 256;
+        break;
+    default:            /* DISTS */
+        base = dbase;
+        extra = dext;
+        end = -1;
+    }
+
+    /* initialize state for loop */
+    huff = 0;                   /* starting code */
+    sym = 0;                    /* starting code symbol */
+    len = min;                  /* starting code length */
+    next = *table;              /* current table to fill in */
+    curr = root;                /* current table index bits */
+    drop = 0;                   /* current bits to drop from code for index */
+    low = (unsigned)(-1);       /* trigger new sub-table when len > root */
+    used = 1U << root;          /* use root table entries */
+    mask = used - 1;            /* mask for comparing low */
+
+    /* check available table space */
+    if ((type == LENS && used >= ENOUGH_LENS) ||
+        (type == DISTS && used >= ENOUGH_DISTS))
+        return 1;
+
+    /* process all codes and make table entries */
+    for (;;) {
+        /* create table entry */
+        this.bits = (unsigned char)(len - drop);
+        if ((int)(work[sym]) < end) {
+            this.op = (unsigned char)0;
+            this.val = work[sym];
+        }
+        else if ((int)(work[sym]) > end) {
+            this.op = (unsigned char)(extra[work[sym]]);
+            this.val = base[work[sym]];
+        }
+        else {
+            this.op = (unsigned char)(32 + 64);         /* end of block */
+            this.val = 0;
+        }
+
+        /* replicate for those indices with low len bits equal to huff */
+        incr = 1U << (len - drop);
+        fill = 1U << curr;
+        do {
+            fill -= incr;
+            next[(huff >> drop) + fill] = this;
+        } while (fill != 0);
+
+        /* backwards increment the len-bit code huff */
+        incr = 1U << (len - 1);
+        while (huff & incr)
+            incr >>= 1;
+        if (incr != 0) {
+            huff &= incr - 1;
+            huff += incr;
+        }
+        else
+            huff = 0;
+
+        /* go to next symbol, update count, len */
+        sym++;
+        if (--(count[len]) == 0) {
+            if (len == max) break;
+            len = lens[work[sym]];
+        }
+
+        /* create new sub-table if needed */
+        if (len > root && (huff & mask) != low) {
+            /* if first time, transition to sub-tables */
+            if (drop == 0)
+                drop = root;
+
+            /* increment past last table */
+            next += 1U << curr;
+
+            /* determine length of next table */
+            curr = len - drop;
+            left = (int)(1 << curr);
+            while (curr + drop < max) {
+                left -= count[curr + drop];
+                if (left <= 0) break;
+                curr++;
+                left <<= 1;
+            }
+
+            /* check for enough space */
+            used += 1U << curr;
+            if ((type == LENS && used >= ENOUGH_LENS) ||
+                (type == DISTS && used >= ENOUGH_DISTS))
+                return 1;
+
+            /* point entry in root table to sub-table */
+            low = huff & mask;
+            (*table)[low].op = (unsigned char)curr;
+            (*table)[low].bits = (unsigned char)root;
+            (*table)[low].val = (unsigned short)(next - *table);
+        }
+    }
+
+    /*
+       Fill in rest of table for incomplete codes.  This loop is similar to the
+       loop above in incrementing huff for table indices.  It is assumed that
+       len is equal to curr + drop, so there is no loop needed to increment
+       through high index bits.  When the current sub-table is filled, the loop
+       drops back to the root table to fill in any remaining entries there.
+     */
+    this.op = (unsigned char)64;                /* invalid code marker */
+    this.bits = (unsigned char)(len - drop);
+    this.val = (unsigned short)0;
+    while (huff != 0) {
+        /* when done with sub-table, drop back to root table */
+        if (drop != 0 && (huff & mask) != low) {
+            drop = 0;
+            len = root;
+            next = *table;
+            curr = root;
+            this.bits = (unsigned char)len;
+        }
+
+        /* put invalid code marker in table */
+        next[huff >> drop] = this;
+
+        /* backwards increment the len-bit code huff */
+        incr = 1U << (len - 1);
+        while (huff & incr)
+            incr >>= 1;
+        if (incr != 0) {
+            huff &= incr - 1;
+            huff += incr;
+        }
+        else
+            huff = 0;
+    }
+
+    /* set return parameters */
+    *table += used;
+    *bits = root;
+    return 0;
+}

contrib/infback9/inftree9.h

@@ -0,0 +1,61 @@
+/* inftree9.h -- header to use inftree9.c
+ * Copyright (C) 1995-2008 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* Structure for decoding tables.  Each entry provides either the
+   information needed to do the operation requested by the code that
+   indexed that table entry, or it provides a pointer to another
+   table that indexes more bits of the code.  op indicates whether
+   the entry is a pointer to another table, a literal, a length or
+   distance, an end-of-block, or an invalid code.  For a table
+   pointer, the low four bits of op is the number of index bits of
+   that table.  For a length or distance, the low four bits of op
+   is the number of extra bits to get after the code.  bits is
+   the number of bits in this code or part of the code to drop off
+   of the bit buffer.  val is the actual byte to output in the case
+   of a literal, the base length or distance, or the offset from
+   the current table to the next table.  Each entry is four bytes. */
+typedef struct {
+    unsigned char op;           /* operation, extra bits, table bits */
+    unsigned char bits;         /* bits in this part of the code */
+    unsigned short val;         /* offset in table or code value */
+} code;
+
+/* op values as set by inflate_table():
+    00000000 - literal
+    0000tttt - table link, tttt != 0 is the number of table index bits
+    100eeeee - length or distance, eeee is the number of extra bits
+    01100000 - end of block
+    01000000 - invalid code
+ */
+
+/* Maximum size of the dynamic table.  The maximum number of code structures is
+   1446, which is the sum of 852 for literal/length codes and 594 for distance
+   codes.  These values were found by exhaustive searches using the program
+   examples/enough.c found in the zlib distribtution.  The arguments to that
+   program are the number of symbols, the initial root table size, and the
+   maximum bit length of a code.  "enough 286 9 15" for literal/length codes
+   returns returns 852, and "enough 32 6 15" for distance codes returns 594.
+   The initial root table size (9 or 6) is found in the fifth argument of the
+   inflate_table() calls in infback9.c.  If the root table size is changed,
+   then these maximum sizes would be need to be recalculated and updated. */
+#define ENOUGH_LENS 852
+#define ENOUGH_DISTS 594
+#define ENOUGH (ENOUGH_LENS+ENOUGH_DISTS)
+
+/* Type of code to build for inflate_table9() */
+typedef enum {
+    CODES,
+    LENS,
+    DISTS
+} codetype;
+
+extern int inflate_table9 OF((codetype type, unsigned short FAR *lens,
+                             unsigned codes, code FAR * FAR *table,
+                             unsigned FAR *bits, unsigned short FAR *work));

contrib/iostream/test.cpp

@@ -0,0 +1,24 @@
+
+#include "zfstream.h"
+
+int main() {
+
+  // Construct a stream object with this filebuffer.  Anything sent
+  // to this stream will go to standard out.
+  gzofstream os( 1, ios::out );
+
+  // This text is getting compressed and sent to stdout.
+  // To prove this, run 'test | zcat'.
+  os << "Hello, Mommy" << endl;
+
+  os << setcompressionlevel( Z_NO_COMPRESSION );
+  os << "hello, hello, hi, ho!" << endl;
+
+  setcompressionlevel( os, Z_DEFAULT_COMPRESSION )
+    << "I'm compressing again" << endl;
+
+  os.close();
+
+  return 0;
+
+}

contrib/iostream/zfstream.cpp

@@ -0,0 +1,329 @@
+
+#include "zfstream.h"
+
+gzfilebuf::gzfilebuf() :
+  file(NULL),
+  mode(0),
+  own_file_descriptor(0)
+{ }
+
+gzfilebuf::~gzfilebuf() {
+
+  sync();
+  if ( own_file_descriptor )
+    close();
+
+}
+
+gzfilebuf *gzfilebuf::open( const char *name,
+                            int io_mode ) {
+
+  if ( is_open() )
+    return NULL;
+
+  char char_mode[10];
+  char *p = char_mode;
+
+  if ( io_mode & ios::in ) {
+    mode = ios::in;
+    *p++ = 'r';
+  } else if ( io_mode & ios::app ) {
+    mode = ios::app;
+    *p++ = 'a';
+  } else {
+    mode = ios::out;
+    *p++ = 'w';
+  }
+
+  if ( io_mode & ios::binary ) {
+    mode |= ios::binary;
+    *p++ = 'b';
+  }
+
+  // Hard code the compression level
+  if ( io_mode & (ios::out|ios::app )) {
+    *p++ = '9';
+  }
+
+  // Put the end-of-string indicator
+  *p = '\0';
+
+  if ( (file = gzopen(name, char_mode)) == NULL )
+    return NULL;
+
+  own_file_descriptor = 1;
+
+  return this;
+
+}
+
+gzfilebuf *gzfilebuf::attach( int file_descriptor,
+                              int io_mode ) {
+
+  if ( is_open() )
+    return NULL;
+
+  char char_mode[10];
+  char *p = char_mode;
+
+  if ( io_mode & ios::in ) {
+    mode = ios::in;
+    *p++ = 'r';
+  } else if ( io_mode & ios::app ) {
+    mode = ios::app;
+    *p++ = 'a';
+  } else {
+    mode = ios::out;
+    *p++ = 'w';
+  }
+
+  if ( io_mode & ios::binary ) {
+    mode |= ios::binary;
+    *p++ = 'b';
+  }
+
+  // Hard code the compression level
+  if ( io_mode & (ios::out|ios::app )) {
+    *p++ = '9';
+  }
+
+  // Put the end-of-string indicator
+  *p = '\0';
+
+  if ( (file = gzdopen(file_descriptor, char_mode)) == NULL )
+    return NULL;
+
+  own_file_descriptor = 0;
+
+  return this;
+
+}
+
+gzfilebuf *gzfilebuf::close() {
+
+  if ( is_open() ) {
+
+    sync();
+    gzclose( file );
+    file = NULL;
+
+  }
+
+  return this;
+
+}
+
+int gzfilebuf::setcompressionlevel( int comp_level ) {
+
+  return gzsetparams(file, comp_level, -2);
+
+}
+
+int gzfilebuf::setcompressionstrategy( int comp_strategy ) {
+
+  return gzsetparams(file, -2, comp_strategy);
+
+}
+
+
+streampos gzfilebuf::seekoff( streamoff off, ios::seek_dir dir, int which ) {
+
+  return streampos(EOF);
+
+}
+
+int gzfilebuf::underflow() {
+
+  // If the file hasn't been opened for reading, error.
+  if ( !is_open() || !(mode & ios::in) )
+    return EOF;
+
+  // if a buffer doesn't exists, allocate one.
+  if ( !base() ) {
+
+    if ( (allocate()) == EOF )
+      return EOF;
+    setp(0,0);
+
+  } else {
+
+    if ( in_avail() )
+      return (unsigned char) *gptr();
+
+    if ( out_waiting() ) {
+      if ( flushbuf() == EOF )
+        return EOF;
+    }
+
+  }
+
+  // Attempt to fill the buffer.
+
+  int result = fillbuf();
+  if ( result == EOF ) {
+    // disable get area
+    setg(0,0,0);
+    return EOF;
+  }
+
+  return (unsigned char) *gptr();
+
+}
+
+int gzfilebuf::overflow( int c ) {
+
+  if ( !is_open() || !(mode & ios::out) )
+    return EOF;
+
+  if ( !base() ) {
+    if ( allocate() == EOF )
+      return EOF;
+    setg(0,0,0);
+  } else {
+    if (in_avail()) {
+        return EOF;
+    }
+    if (out_waiting()) {
+      if (flushbuf() == EOF)
+        return EOF;
+    }
+  }
+
+  int bl = blen();
+  setp( base(), base() + bl);
+
+  if ( c != EOF ) {
+
+    *pptr() = c;
+    pbump(1);
+
+  }
+
+  return 0;
+
+}
+
+int gzfilebuf::sync() {
+
+  if ( !is_open() )
+    return EOF;
+
+  if ( out_waiting() )
+    return flushbuf();
+
+  return 0;
+
+}
+
+int gzfilebuf::flushbuf() {
+
+  int n;
+  char *q;
+
+  q = pbase();
+  n = pptr() - q;
+
+  if ( gzwrite( file, q, n) < n )
+    return EOF;
+
+  setp(0,0);
+
+  return 0;
+
+}
+
+int gzfilebuf::fillbuf() {
+
+  int required;
+  char *p;
+
+  p = base();
+
+  required = blen();
+
+  int t = gzread( file, p, required );
+
+  if ( t <= 0) return EOF;
+
+  setg( base(), base(), base()+t);
+
+  return t;
+
+}
+
+gzfilestream_common::gzfilestream_common() :
+  ios( gzfilestream_common::rdbuf() )
+{ }
+
+gzfilestream_common::~gzfilestream_common()
+{ }
+
+void gzfilestream_common::attach( int fd, int io_mode ) {
+
+  if ( !buffer.attach( fd, io_mode) )
+    clear( ios::failbit | ios::badbit );
+  else
+    clear();
+
+}
+
+void gzfilestream_common::open( const char *name, int io_mode ) {
+
+  if ( !buffer.open( name, io_mode ) )
+    clear( ios::failbit | ios::badbit );
+  else
+    clear();
+
+}
+
+void gzfilestream_common::close() {
+
+  if ( !buffer.close() )
+    clear( ios::failbit | ios::badbit );
+
+}
+
+gzfilebuf *gzfilestream_common::rdbuf()
+{
+  return &buffer;
+}
+
+gzifstream::gzifstream() :
+  ios( gzfilestream_common::rdbuf() )
+{
+  clear( ios::badbit );
+}
+
+gzifstream::gzifstream( const char *name, int io_mode ) :
+  ios( gzfilestream_common::rdbuf() )
+{
+  gzfilestream_common::open( name, io_mode );
+}
+
+gzifstream::gzifstream( int fd, int io_mode ) :
+  ios( gzfilestream_common::rdbuf() )
+{
+  gzfilestream_common::attach( fd, io_mode );
+}
+
+gzifstream::~gzifstream() { }
+
+gzofstream::gzofstream() :
+  ios( gzfilestream_common::rdbuf() )
+{
+  clear( ios::badbit );
+}
+
+gzofstream::gzofstream( const char *name, int io_mode ) :
+  ios( gzfilestream_common::rdbuf() )
+{
+  gzfilestream_common::open( name, io_mode );
+}
+
+gzofstream::gzofstream( int fd, int io_mode ) :
+  ios( gzfilestream_common::rdbuf() )
+{
+  gzfilestream_common::attach( fd, io_mode );
+}
+
+gzofstream::~gzofstream() { }

contrib/iostream/zfstream.h

@@ -0,0 +1,128 @@
+
+#ifndef zfstream_h
+#define zfstream_h
+
+#include <fstream.h>
+#include "zlib.h"
+
+class gzfilebuf : public streambuf {
+
+public:
+
+  gzfilebuf( );
+  virtual ~gzfilebuf();
+
+  gzfilebuf *open( const char *name, int io_mode );
+  gzfilebuf *attach( int file_descriptor, int io_mode );
+  gzfilebuf *close();
+
+  int setcompressionlevel( int comp_level );
+  int setcompressionstrategy( int comp_strategy );
+
+  inline int is_open() const { return (file !=NULL); }
+
+  virtual streampos seekoff( streamoff, ios::seek_dir, int );
+
+  virtual int sync();
+
+protected:
+
+  virtual int underflow();
+  virtual int overflow( int = EOF );
+
+private:
+
+  gzFile file;
+  short mode;
+  short own_file_descriptor;
+
+  int flushbuf();
+  int fillbuf();
+
+};
+
+class gzfilestream_common : virtual public ios {
+
+  friend class gzifstream;
+  friend class gzofstream;
+  friend gzofstream &setcompressionlevel( gzofstream &, int );
+  friend gzofstream &setcompressionstrategy( gzofstream &, int );
+
+public:
+  virtual ~gzfilestream_common();
+
+  void attach( int fd, int io_mode );
+  void open( const char *name, int io_mode );
+  void close();
+
+protected:
+  gzfilestream_common();
+
+private:
+  gzfilebuf *rdbuf();
+
+  gzfilebuf buffer;
+
+};
+
+class gzifstream : public gzfilestream_common, public istream {
+
+public:
+
+  gzifstream();
+  gzifstream( const char *name, int io_mode = ios::in );
+  gzifstream( int fd, int io_mode = ios::in );
+
+  virtual ~gzifstream();
+
+};
+
+class gzofstream : public gzfilestream_common, public ostream {
+
+public:
+
+  gzofstream();
+  gzofstream( const char *name, int io_mode = ios::out );
+  gzofstream( int fd, int io_mode = ios::out );
+
+  virtual ~gzofstream();
+
+};
+
+template<class T> class gzomanip {
+  friend gzofstream &operator<<(gzofstream &, const gzomanip<T> &);
+public:
+  gzomanip(gzofstream &(*f)(gzofstream &, T), T v) : func(f), val(v) { }
+private:
+  gzofstream &(*func)(gzofstream &, T);
+  T val;
+};
+
+template<class T> gzofstream &operator<<(gzofstream &s, const gzomanip<T> &m)
+{
+  return (*m.func)(s, m.val);
+}
+
+inline gzofstream &setcompressionlevel( gzofstream &s, int l )
+{
+  (s.rdbuf())->setcompressionlevel(l);
+  return s;
+}
+
+inline gzofstream &setcompressionstrategy( gzofstream &s, int l )
+{
+  (s.rdbuf())->setcompressionstrategy(l);
+  return s;
+}
+
+inline gzomanip<int> setcompressionlevel(int l)
+{
+  return gzomanip<int>(&setcompressionlevel,l);
+}
+
+inline gzomanip<int> setcompressionstrategy(int l)
+{
+  return gzomanip<int>(&setcompressionstrategy,l);
+}
+
+#endif

contrib/iostream2/zstream.h

@@ -0,0 +1,307 @@
+/*
+ *
+ * Copyright (c) 1997
+ * Christian Michelsen Research AS
+ * Advanced Computing
+ * Fantoftvegen 38, 5036 BERGEN, Norway
+ * http://www.cmr.no
+ *
+ * Permission to use, copy, modify, distribute and sell this software
+ * and its documentation for any purpose is hereby granted without fee,
+ * provided that the above copyright notice appear in all copies and
+ * that both that copyright notice and this permission notice appear
+ * in supporting documentation.  Christian Michelsen Research AS makes no
+ * representations about the suitability of this software for any
+ * purpose.  It is provided "as is" without express or implied warranty.
+ *
+ */
+
+#ifndef ZSTREAM__H
+#define ZSTREAM__H
+
+/*
+ * zstream.h - C++ interface to the 'zlib' general purpose compression library
+ * $Id: zstream.h 1.1 1997-06-25 12:00:56+02 tyge Exp tyge $
+ */
+
+#include <strstream.h>
+#include <string.h>
+#include <stdio.h>
+#include "zlib.h"
+
+#if defined(_WIN32)
+#   include <fcntl.h>
+#   include <io.h>
+#   define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+#   define SET_BINARY_MODE(file)
+#endif
+
+class zstringlen {
+public:
+    zstringlen(class izstream&);
+    zstringlen(class ozstream&, const char*);
+    size_t value() const { return val.word; }
+private:
+    struct Val { unsigned char byte; size_t word; } val;
+};
+
+//  ----------------------------- izstream -----------------------------
+
+class izstream
+{
+    public:
+        izstream() : m_fp(0) {}
+        izstream(FILE* fp) : m_fp(0) { open(fp); }
+        izstream(const char* name) : m_fp(0) { open(name); }
+        ~izstream() { close(); }
+
+        /* Opens a gzip (.gz) file for reading.
+         * open() can be used to read a file which is not in gzip format;
+         * in this case read() will directly read from the file without
+         * decompression. errno can be checked to distinguish two error
+         * cases (if errno is zero, the zlib error is Z_MEM_ERROR).
+         */
+        void open(const char* name) {
+            if (m_fp) close();
+            m_fp = ::gzopen(name, "rb");
+        }
+
+        void open(FILE* fp) {
+            SET_BINARY_MODE(fp);
+            if (m_fp) close();
+            m_fp = ::gzdopen(fileno(fp), "rb");
+        }
+
+        /* Flushes all pending input if necessary, closes the compressed file
+         * and deallocates all the (de)compression state. The return value is
+         * the zlib error number (see function error() below).
+         */
+        int close() {
+            int r = ::gzclose(m_fp);
+            m_fp = 0; return r;
+        }
+
+        /* Binary read the given number of bytes from the compressed file.
+         */
+        int read(void* buf, size_t len) {
+            return ::gzread(m_fp, buf, len);
+        }
+
+        /* Returns the error message for the last error which occurred on the
+         * given compressed file. errnum is set to zlib error number. If an
+         * error occurred in the file system and not in the compression library,
+         * errnum is set to Z_ERRNO and the application may consult errno
+         * to get the exact error code.
+         */
+        const char* error(int* errnum) {
+            return ::gzerror(m_fp, errnum);
+        }
+
+        gzFile fp() { return m_fp; }
+
+    private:
+        gzFile m_fp;
+};
+
+/*
+ * Binary read the given (array of) object(s) from the compressed file.
+ * If the input file was not in gzip format, read() copies the objects number
+ * of bytes into the buffer.
+ * returns the number of uncompressed bytes actually read
+ * (0 for end of file, -1 for error).
+ */
+template <class T, class Items>
+inline int read(izstream& zs, T* x, Items items) {
+    return ::gzread(zs.fp(), x, items*sizeof(T));
+}
+
+/*
+ * Binary input with the '>' operator.
+ */
+template <class T>
+inline izstream& operator>(izstream& zs, T& x) {
+    ::gzread(zs.fp(), &x, sizeof(T));
+    return zs;
+}
+
+
+inline zstringlen::zstringlen(izstream& zs) {
+    zs > val.byte;
+    if (val.byte == 255) zs > val.word;
+    else val.word = val.byte;
+}
+
+/*
+ * Read length of string + the string with the '>' operator.
+ */
+inline izstream& operator>(izstream& zs, char* x) {
+    zstringlen len(zs);
+    ::gzread(zs.fp(), x, len.value());
+    x[len.value()] = '\0';
+    return zs;
+}
+
+inline char* read_string(izstream& zs) {
+    zstringlen len(zs);
+    char* x = new char[len.value()+1];
+    ::gzread(zs.fp(), x, len.value());
+    x[len.value()] = '\0';
+    return x;
+}
+
+// ----------------------------- ozstream -----------------------------
+
+class ozstream
+{
+    public:
+        ozstream() : m_fp(0), m_os(0) {
+        }
+        ozstream(FILE* fp, int level = Z_DEFAULT_COMPRESSION)
+            : m_fp(0), m_os(0) {
+            open(fp, level);
+        }
+        ozstream(const char* name, int level = Z_DEFAULT_COMPRESSION)
+            : m_fp(0), m_os(0) {
+            open(name, level);
+        }
+        ~ozstream() {
+            close();
+        }
+
+        /* Opens a gzip (.gz) file for writing.
+         * The compression level parameter should be in 0..9
+         * errno can be checked to distinguish two error cases
+         * (if errno is zero, the zlib error is Z_MEM_ERROR).
+         */
+        void open(const char* name, int level = Z_DEFAULT_COMPRESSION) {
+            char mode[4] = "wb\0";
+            if (level != Z_DEFAULT_COMPRESSION) mode[2] = '0'+level;
+            if (m_fp) close();
+            m_fp = ::gzopen(name, mode);
+        }
+
+        /* open from a FILE pointer.
+         */
+        void open(FILE* fp, int level = Z_DEFAULT_COMPRESSION) {
+            SET_BINARY_MODE(fp);
+            char mode[4] = "wb\0";
+            if (level != Z_DEFAULT_COMPRESSION) mode[2] = '0'+level;
+            if (m_fp) close();
+            m_fp = ::gzdopen(fileno(fp), mode);
+        }
+
+        /* Flushes all pending output if necessary, closes the compressed file
+         * and deallocates all the (de)compression state. The return value is
+         * the zlib error number (see function error() below).
+         */
+        int close() {
+            if (m_os) {
+                ::gzwrite(m_fp, m_os->str(), m_os->pcount());
+                delete[] m_os->str(); delete m_os; m_os = 0;
+            }
+            int r = ::gzclose(m_fp); m_fp = 0; return r;
+        }
+
+        /* Binary write the given number of bytes into the compressed file.
+         */
+        int write(const void* buf, size_t len) {
+            return ::gzwrite(m_fp, (voidp) buf, len);
+        }
+
+        /* Flushes all pending output into the compressed file. The parameter
+         * _flush is as in the deflate() function. The return value is the zlib
+         * error number (see function gzerror below). flush() returns Z_OK if
+         * the flush_ parameter is Z_FINISH and all output could be flushed.
+         * flush() should be called only when strictly necessary because it can
+         * degrade compression.
+         */
+        int flush(int _flush) {
+            os_flush();
+            return ::gzflush(m_fp, _flush);
+        }
+
+        /* Returns the error message for the last error which occurred on the
+         * given compressed file. errnum is set to zlib error number. If an
+         * error occurred in the file system and not in the compression library,
+         * errnum is set to Z_ERRNO and the application may consult errno
+         * to get the exact error code.
+         */
+        const char* error(int* errnum) {
+            return ::gzerror(m_fp, errnum);
+        }
+
+        gzFile fp() { return m_fp; }
+
+        ostream& os() {
+            if (m_os == 0) m_os = new ostrstream;
+            return *m_os;
+        }
+
+        void os_flush() {
+            if (m_os && m_os->pcount()>0) {
+                ostrstream* oss = new ostrstream;
+                oss->fill(m_os->fill());
+                oss->flags(m_os->flags());
+                oss->precision(m_os->precision());
+                oss->width(m_os->width());
+                ::gzwrite(m_fp, m_os->str(), m_os->pcount());
+                delete[] m_os->str(); delete m_os; m_os = oss;
+            }
+        }
+
+    private:
+        gzFile m_fp;
+        ostrstream* m_os;
+};
+
+/*
+ * Binary write the given (array of) object(s) into the compressed file.
+ * returns the number of uncompressed bytes actually written
+ * (0 in case of error).
+ */
+template <class T, class Items>
+inline int write(ozstream& zs, const T* x, Items items) {
+    return ::gzwrite(zs.fp(), (voidp) x, items*sizeof(T));
+}
+
+/*
+ * Binary output with the '<' operator.
+ */
+template <class T>
+inline ozstream& operator<(ozstream& zs, const T& x) {
+    ::gzwrite(zs.fp(), (voidp) &x, sizeof(T));
+    return zs;
+}
+
+inline zstringlen::zstringlen(ozstream& zs, const char* x) {
+    val.byte = 255;  val.word = ::strlen(x);
+    if (val.word < 255) zs < (val.byte = val.word);
+    else zs < val;
+}
+
+/*
+ * Write length of string + the string with the '<' operator.
+ */
+inline ozstream& operator<(ozstream& zs, const char* x) {
+    zstringlen len(zs, x);
+    ::gzwrite(zs.fp(), (voidp) x, len.value());
+    return zs;
+}
+
+#ifdef _MSC_VER
+inline ozstream& operator<(ozstream& zs, char* const& x) {
+    return zs < (const char*) x;
+}
+#endif
+
+/*
+ * Ascii write with the << operator;
+ */
+template <class T>
+inline ostream& operator<<(ozstream& zs, const T& x) {
+    zs.os_flush();
+    return zs.os() << x;
+}
+
+#endif

contrib/iostream2/zstream_test.cpp

@@ -0,0 +1,25 @@
+#include "zstream.h"
+#include <math.h>
+#include <stdlib.h>
+#include <iomanip.h>
+
+void main() {
+    char h[256] = "Hello";
+    char* g = "Goodbye";
+    ozstream out("temp.gz");
+    out < "This works well" < h < g;
+    out.close();
+
+    izstream in("temp.gz"); // read it back
+    char *x = read_string(in), *y = new char[256], z[256];
+    in > y > z;
+    in.close();
+    cout << x << endl << y << endl << z << endl;
+
+    out.open("temp.gz"); // try ascii output; zcat temp.gz to see the results
+    out << setw(50) << setfill('#') << setprecision(20) << x << endl << y << endl << z << endl;
+    out << z << endl << y << endl << x << endl;
+    out << 1.1234567890123456789 << endl;
+
+    delete[] x; delete[] y;
+}

contrib/iostream3/README

@@ -0,0 +1,35 @@
+These classes provide a C++ stream interface to the zlib library. It allows you
+to do things like:
+
+  gzofstream outf("blah.gz");
+  outf << "These go into the gzip file " << 123 << endl;
+
+It does this by deriving a specialized stream buffer for gzipped files, which is
+the way Stroustrup would have done it. :->
+
+The gzifstream and gzofstream classes were originally written by Kevin Ruland
+and made available in the zlib contrib/iostream directory. The older version still
+compiles under gcc 2.xx, but not under gcc 3.xx, which sparked the development of
+this version.
+
+The new classes are as standard-compliant as possible, closely following the
+approach of the standard library's fstream classes. It compiles under gcc versions
+3.2 and 3.3, but not under gcc 2.xx. This is mainly due to changes in the standard
+library naming scheme. The new version of gzifstream/gzofstream/gzfilebuf differs
+from the previous one in the following respects:
+- added showmanyc
+- added setbuf, with support for unbuffered output via setbuf(0,0)
+- a few bug fixes of stream behavior
+- gzipped output file opened with default compression level instead of maximum level
+- setcompressionlevel()/strategy() members replaced by single setcompression()
+
+The code is provided "as is", with the permission to use, copy, modify, distribute
+and sell it for any purpose without fee.
+
+Ludwig Schwardt
+<schwardt@sun.ac.za>
+
+DSP Lab
+Electrical & Electronic Engineering Department
+University of Stellenbosch
+South Africa

contrib/iostream3/TODO

@@ -0,0 +1,17 @@
+Possible upgrades to gzfilebuf:
+
+- The ability to do putback (e.g. putbackfail)
+
+- The ability to seek (zlib supports this, but could be slow/tricky)
+
+- Simultaneous read/write access (does it make sense?)
+
+- Support for ios_base::ate open mode
+
+- Locale support?
+
+- Check public interface to see which calls give problems
+  (due to dependence on library internals)
+
+- Override operator<<(ostream&, gzfilebuf*) to allow direct copying
+  of stream buffer to stream ( i.e. os << is.rdbuf(); )

contrib/iostream3/test.cc

@@ -0,0 +1,50 @@
+/*
+ * Test program for gzifstream and gzofstream
+ *
+ * by Ludwig Schwardt <schwardt@sun.ac.za>
+ * original version by Kevin Ruland <kevin@rodin.wustl.edu>
+ */
+
+#include "zfstream.h"
+#include <iostream>      // for cout
+
+int main() {
+
+  gzofstream outf;
+  gzifstream inf;
+  char buf[80];
+
+  outf.open("test1.txt.gz");
+  outf << "The quick brown fox sidestepped the lazy canine\n"
+       << 1.3 << "\nPlan " << 9 << std::endl;
+  outf.close();
+  std::cout << "Wrote the following message to 'test1.txt.gz' (check with zcat or zless):\n"
+            << "The quick brown fox sidestepped the lazy canine\n"
+            << 1.3 << "\nPlan " << 9 << std::endl;
+
+  std::cout << "\nReading 'test1.txt.gz' (buffered) produces:\n";
+  inf.open("test1.txt.gz");
+  while (inf.getline(buf,80,'\n')) {
+    std::cout << buf << "\t(" << inf.rdbuf()->in_avail() << " chars left in buffer)\n";
+  }
+  inf.close();
+
+  outf.rdbuf()->pubsetbuf(0,0);
+  outf.open("test2.txt.gz");
+  outf << setcompression(Z_NO_COMPRESSION)
+       << "The quick brown fox sidestepped the lazy canine\n"
+       << 1.3 << "\nPlan " << 9 << std::endl;
+  outf.close();
+  std::cout << "\nWrote the same message to 'test2.txt.gz' in uncompressed form";
+
+  std::cout << "\nReading 'test2.txt.gz' (unbuffered) produces:\n";
+  inf.rdbuf()->pubsetbuf(0,0);
+  inf.open("test2.txt.gz");
+  while (inf.getline(buf,80,'\n')) {
+    std::cout << buf << "\t(" << inf.rdbuf()->in_avail() << " chars left in buffer)\n";
+  }
+  inf.close();
+
+  return 0;
+
+}

contrib/iostream3/zfstream.cc

@@ -0,0 +1,479 @@
+/*
+ * A C++ I/O streams interface to the zlib gz* functions
+ *
+ * by Ludwig Schwardt <schwardt@sun.ac.za>
+ * original version by Kevin Ruland <kevin@rodin.wustl.edu>
+ *
+ * This version is standard-compliant and compatible with gcc 3.x.
+ */
+
+#include "zfstream.h"
+#include <cstring>          // for strcpy, strcat, strlen (mode strings)
+#include <cstdio>           // for BUFSIZ
+
+// Internal buffer sizes (default and "unbuffered" versions)
+#define BIGBUFSIZE BUFSIZ
+#define SMALLBUFSIZE 1
+
+/*****************************************************************************/
+
+// Default constructor
+gzfilebuf::gzfilebuf()
+: file(NULL), io_mode(std::ios_base::openmode(0)), own_fd(false),
+  buffer(NULL), buffer_size(BIGBUFSIZE), own_buffer(true)
+{
+  // No buffers to start with
+  this->disable_buffer();
+}
+
+// Destructor
+gzfilebuf::~gzfilebuf()
+{
+  // Sync output buffer and close only if responsible for file
+  // (i.e. attached streams should be left open at this stage)
+  this->sync();
+  if (own_fd)
+    this->close();
+  // Make sure internal buffer is deallocated
+  this->disable_buffer();
+}
+
+// Set compression level and strategy
+int
+gzfilebuf::setcompression(int comp_level,
+                          int comp_strategy)
+{
+  return gzsetparams(file, comp_level, comp_strategy);
+}
+
+// Open gzipped file
+gzfilebuf*
+gzfilebuf::open(const char *name,
+                std::ios_base::openmode mode)
+{
+  // Fail if file already open
+  if (this->is_open())
+    return NULL;
+  // Don't support simultaneous read/write access (yet)
+  if ((mode & std::ios_base::in) && (mode & std::ios_base::out))
+    return NULL;
+
+  // Build mode string for gzopen and check it [27.8.1.3.2]
+  char char_mode[6] = "\0\0\0\0\0";
+  if (!this->open_mode(mode, char_mode))
+    return NULL;
+
+  // Attempt to open file
+  if ((file = gzopen(name, char_mode)) == NULL)
+    return NULL;
+
+  // On success, allocate internal buffer and set flags
+  this->enable_buffer();
+  io_mode = mode;
+  own_fd = true;
+  return this;
+}
+
+// Attach to gzipped file
+gzfilebuf*
+gzfilebuf::attach(int fd,
+                  std::ios_base::openmode mode)
+{
+  // Fail if file already open
+  if (this->is_open())
+    return NULL;
+  // Don't support simultaneous read/write access (yet)
+  if ((mode & std::ios_base::in) && (mode & std::ios_base::out))
+    return NULL;
+
+  // Build mode string for gzdopen and check it [27.8.1.3.2]
+  char char_mode[6] = "\0\0\0\0\0";
+  if (!this->open_mode(mode, char_mode))
+    return NULL;
+
+  // Attempt to attach to file
+  if ((file = gzdopen(fd, char_mode)) == NULL)
+    return NULL;
+
+  // On success, allocate internal buffer and set flags
+  this->enable_buffer();
+  io_mode = mode;
+  own_fd = false;
+  return this;
+}
+
+// Close gzipped file
+gzfilebuf*
+gzfilebuf::close()
+{
+  // Fail immediately if no file is open
+  if (!this->is_open())
+    return NULL;
+  // Assume success
+  gzfilebuf* retval = this;
+  // Attempt to sync and close gzipped file
+  if (this->sync() == -1)
+    retval = NULL;
+  if (gzclose(file) < 0)
+    retval = NULL;
+  // File is now gone anyway (postcondition [27.8.1.3.8])
+  file = NULL;
+  own_fd = false;
+  // Destroy internal buffer if it exists
+  this->disable_buffer();
+  return retval;
+}
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+// Convert int open mode to mode string
+bool
+gzfilebuf::open_mode(std::ios_base::openmode mode,
+                     char* c_mode) const
+{
+  bool testb = mode & std::ios_base::binary;
+  bool testi = mode & std::ios_base::in;
+  bool testo = mode & std::ios_base::out;
+  bool testt = mode & std::ios_base::trunc;
+  bool testa = mode & std::ios_base::app;
+
+  // Check for valid flag combinations - see [27.8.1.3.2] (Table 92)
+  // Original zfstream hardcoded the compression level to maximum here...
+  // Double the time for less than 1% size improvement seems
+  // excessive though - keeping it at the default level
+  // To change back, just append "9" to the next three mode strings
+  if (!testi && testo && !testt && !testa)
+    strcpy(c_mode, "w");
+  if (!testi && testo && !testt && testa)
+    strcpy(c_mode, "a");
+  if (!testi && testo && testt && !testa)
+    strcpy(c_mode, "w");
+  if (testi && !testo && !testt && !testa)
+    strcpy(c_mode, "r");
+  // No read/write mode yet
+//  if (testi && testo && !testt && !testa)
+//    strcpy(c_mode, "r+");
+//  if (testi && testo && testt && !testa)
+//    strcpy(c_mode, "w+");
+
+  // Mode string should be empty for invalid combination of flags
+  if (strlen(c_mode) == 0)
+    return false;
+  if (testb)
+    strcat(c_mode, "b");
+  return true;
+}
+
+// Determine number of characters in internal get buffer
+std::streamsize
+gzfilebuf::showmanyc()
+{
+  // Calls to underflow will fail if file not opened for reading
+  if (!this->is_open() || !(io_mode & std::ios_base::in))
+    return -1;
+  // Make sure get area is in use
+  if (this->gptr() && (this->gptr() < this->egptr()))
+    return std::streamsize(this->egptr() - this->gptr());
+  else
+    return 0;
+}
+
+// Fill get area from gzipped file
+gzfilebuf::int_type
+gzfilebuf::underflow()
+{
+  // If something is left in the get area by chance, return it
+  // (this shouldn't normally happen, as underflow is only supposed
+  // to be called when gptr >= egptr, but it serves as error check)
+  if (this->gptr() && (this->gptr() < this->egptr()))
+    return traits_type::to_int_type(*(this->gptr()));
+
+  // If the file hasn't been opened for reading, produce error
+  if (!this->is_open() || !(io_mode & std::ios_base::in))
+    return traits_type::eof();
+
+  // Attempt to fill internal buffer from gzipped file
+  // (buffer must be guaranteed to exist...)
+  int bytes_read = gzread(file, buffer, buffer_size);
+  // Indicates error or EOF
+  if (bytes_read <= 0)
+  {
+    // Reset get area
+    this->setg(buffer, buffer, buffer);
+    return traits_type::eof();
+  }
+  // Make all bytes read from file available as get area
+  this->setg(buffer, buffer, buffer + bytes_read);
+
+  // Return next character in get area
+  return traits_type::to_int_type(*(this->gptr()));
+}
+
+// Write put area to gzipped file
+gzfilebuf::int_type
+gzfilebuf::overflow(int_type c)
+{
+  // Determine whether put area is in use
+  if (this->pbase())
+  {
+    // Double-check pointer range
+    if (this->pptr() > this->epptr() || this->pptr() < this->pbase())
+      return traits_type::eof();
+    // Add extra character to buffer if not EOF
+    if (!traits_type::eq_int_type(c, traits_type::eof()))
+    {
+      *(this->pptr()) = traits_type::to_char_type(c);
+      this->pbump(1);
+    }
+    // Number of characters to write to file
+    int bytes_to_write = this->pptr() - this->pbase();
+    // Overflow doesn't fail if nothing is to be written
+    if (bytes_to_write > 0)
+    {
+      // If the file hasn't been opened for writing, produce error
+      if (!this->is_open() || !(io_mode & std::ios_base::out))
+        return traits_type::eof();
+      // If gzipped file won't accept all bytes written to it, fail
+      if (gzwrite(file, this->pbase(), bytes_to_write) != bytes_to_write)
+        return traits_type::eof();
+      // Reset next pointer to point to pbase on success
+      this->pbump(-bytes_to_write);
+    }
+  }
+  // Write extra character to file if not EOF
+  else if (!traits_type::eq_int_type(c, traits_type::eof()))
+  {
+    // If the file hasn't been opened for writing, produce error
+    if (!this->is_open() || !(io_mode & std::ios_base::out))
+      return traits_type::eof();
+    // Impromptu char buffer (allows "unbuffered" output)
+    char_type last_char = traits_type::to_char_type(c);
+    // If gzipped file won't accept this character, fail
+    if (gzwrite(file, &last_char, 1) != 1)
+      return traits_type::eof();
+  }
+
+  // If you got here, you have succeeded (even if c was EOF)
+  // The return value should therefore be non-EOF
+  if (traits_type::eq_int_type(c, traits_type::eof()))
+    return traits_type::not_eof(c);
+  else
+    return c;
+}
+
+// Assign new buffer
+std::streambuf*
+gzfilebuf::setbuf(char_type* p,
+                  std::streamsize n)
+{
+  // First make sure stuff is sync'ed, for safety
+  if (this->sync() == -1)
+    return NULL;
+  // If buffering is turned off on purpose via setbuf(0,0), still allocate one...
+  // "Unbuffered" only really refers to put [27.8.1.4.10], while get needs at
+  // least a buffer of size 1 (very inefficient though, therefore make it bigger?)
+  // This follows from [27.5.2.4.3]/12 (gptr needs to point at something, it seems)
+  if (!p || !n)
+  {
+    // Replace existing buffer (if any) with small internal buffer
+    this->disable_buffer();
+    buffer = NULL;
+    buffer_size = 0;
+    own_buffer = true;
+    this->enable_buffer();
+  }
+  else
+  {
+    // Replace existing buffer (if any) with external buffer
+    this->disable_buffer();
+    buffer = p;
+    buffer_size = n;
+    own_buffer = false;
+    this->enable_buffer();
+  }
+  return this;
+}
+
+// Write put area to gzipped file (i.e. ensures that put area is empty)
+int
+gzfilebuf::sync()
+{
+  return traits_type::eq_int_type(this->overflow(), traits_type::eof()) ? -1 : 0;
+}
+
+/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
+
+// Allocate internal buffer
+void
+gzfilebuf::enable_buffer()
+{
+  // If internal buffer required, allocate one
+  if (own_buffer && !buffer)
+  {
+    // Check for buffered vs. "unbuffered"
+    if (buffer_size > 0)
+    {
+      // Allocate internal buffer
+      buffer = new char_type[buffer_size];
+      // Get area starts empty and will be expanded by underflow as need arises
+      this->setg(buffer, buffer, buffer);
+      // Setup entire internal buffer as put area.
+      // The one-past-end pointer actually points to the last element of the buffer,
+      // so that overflow(c) can safely add the extra character c to the sequence.
+      // These pointers remain in place for the duration of the buffer
+      this->setp(buffer, buffer + buffer_size - 1);
+    }
+    else
+    {
+      // Even in "unbuffered" case, (small?) get buffer is still required
+      buffer_size = SMALLBUFSIZE;
+      buffer = new char_type[buffer_size];
+      this->setg(buffer, buffer, buffer);
+      // "Unbuffered" means no put buffer
+      this->setp(0, 0);
+    }
+  }
+  else
+  {
+    // If buffer already allocated, reset buffer pointers just to make sure no
+    // stale chars are lying around
+    this->setg(buffer, buffer, buffer);
+    this->setp(buffer, buffer + buffer_size - 1);
+  }
+}
+
+// Destroy internal buffer
+void
+gzfilebuf::disable_buffer()
+{
+  // If internal buffer exists, deallocate it
+  if (own_buffer && buffer)
+  {
+    // Preserve unbuffered status by zeroing size
+    if (!this->pbase())
+      buffer_size = 0;
+    delete[] buffer;
+    buffer = NULL;
+    this->setg(0, 0, 0);
+    this->setp(0, 0);
+  }
+  else
+  {
+    // Reset buffer pointers to initial state if external buffer exists
+    this->setg(buffer, buffer, buffer);
+    if (buffer)
+      this->setp(buffer, buffer + buffer_size - 1);
+    else
+      this->setp(0, 0);
+  }
+}
+
+/*****************************************************************************/
+
+// Default constructor initializes stream buffer
+gzifstream::gzifstream()
+: std::istream(NULL), sb()
+{ this->init(&sb); }
+
+// Initialize stream buffer and open file
+gzifstream::gzifstream(const char* name,
+                       std::ios_base::openmode mode)
+: std::istream(NULL), sb()
+{
+  this->init(&sb);
+  this->open(name, mode);
+}
+
+// Initialize stream buffer and attach to file
+gzifstream::gzifstream(int fd,
+                       std::ios_base::openmode mode)
+: std::istream(NULL), sb()
+{
+  this->init(&sb);
+  this->attach(fd, mode);
+}
+
+// Open file and go into fail() state if unsuccessful
+void
+gzifstream::open(const char* name,
+                 std::ios_base::openmode mode)
+{
+  if (!sb.open(name, mode | std::ios_base::in))
+    this->setstate(std::ios_base::failbit);
+  else
+    this->clear();
+}
+
+// Attach to file and go into fail() state if unsuccessful
+void
+gzifstream::attach(int fd,
+                   std::ios_base::openmode mode)
+{
+  if (!sb.attach(fd, mode | std::ios_base::in))
+    this->setstate(std::ios_base::failbit);
+  else
+    this->clear();
+}
+
+// Close file
+void
+gzifstream::close()
+{
+  if (!sb.close())
+    this->setstate(std::ios_base::failbit);
+}
+
+/*****************************************************************************/
+
+// Default constructor initializes stream buffer
+gzofstream::gzofstream()
+: std::ostream(NULL), sb()
+{ this->init(&sb); }
+
+// Initialize stream buffer and open file
+gzofstream::gzofstream(const char* name,
+                       std::ios_base::openmode mode)
+: std::ostream(NULL), sb()
+{
+  this->init(&sb);
+  this->open(name, mode);
+}
+
+// Initialize stream buffer and attach to file
+gzofstream::gzofstream(int fd,
+                       std::ios_base::openmode mode)
+: std::ostream(NULL), sb()
+{
+  this->init(&sb);
+  this->attach(fd, mode);
+}
+
+// Open file and go into fail() state if unsuccessful
+void
+gzofstream::open(const char* name,
+                 std::ios_base::openmode mode)
+{
+  if (!sb.open(name, mode | std::ios_base::out))
+    this->setstate(std::ios_base::failbit);
+  else
+    this->clear();
+}
+
+// Attach to file and go into fail() state if unsuccessful
+void
+gzofstream::attach(int fd,
+                   std::ios_base::openmode mode)
+{
+  if (!sb.attach(fd, mode | std::ios_base::out))
+    this->setstate(std::ios_base::failbit);
+  else
+    this->clear();
+}
+
+// Close file
+void
+gzofstream::close()
+{
+  if (!sb.close())
+    this->setstate(std::ios_base::failbit);
+}

contrib/iostream3/zfstream.h

@@ -0,0 +1,466 @@
+/*
+ * A C++ I/O streams interface to the zlib gz* functions
+ *
+ * by Ludwig Schwardt <schwardt@sun.ac.za>
+ * original version by Kevin Ruland <kevin@rodin.wustl.edu>
+ *
+ * This version is standard-compliant and compatible with gcc 3.x.
+ */
+
+#ifndef ZFSTREAM_H
+#define ZFSTREAM_H
+
+#include <istream>  // not iostream, since we don't need cin/cout
+#include <ostream>
+#include "zlib.h"
+
+/*****************************************************************************/
+
+/**
+ *  @brief  Gzipped file stream buffer class.
+ *
+ *  This class implements basic_filebuf for gzipped files. It doesn't yet support
+ *  seeking (allowed by zlib but slow/limited), putback and read/write access
+ *  (tricky). Otherwise, it attempts to be a drop-in replacement for the standard
+ *  file streambuf.
+*/
+class gzfilebuf : public std::streambuf
+{
+public:
+  //  Default constructor.
+  gzfilebuf();
+
+  //  Destructor.
+  virtual
+  ~gzfilebuf();
+
+  /**
+   *  @brief  Set compression level and strategy on the fly.
+   *  @param  comp_level  Compression level (see zlib.h for allowed values)
+   *  @param  comp_strategy  Compression strategy (see zlib.h for allowed values)
+   *  @return  Z_OK on success, Z_STREAM_ERROR otherwise.
+   *
+   *  Unfortunately, these parameters cannot be modified separately, as the
+   *  previous zfstream version assumed. Since the strategy is seldom changed,
+   *  it can default and setcompression(level) then becomes like the old
+   *  setcompressionlevel(level).
+  */
+  int
+  setcompression(int comp_level,
+                 int comp_strategy = Z_DEFAULT_STRATEGY);
+
+  /**
+   *  @brief  Check if file is open.
+   *  @return  True if file is open.
+  */
+  bool
+  is_open() const { return (file != NULL); }
+
+  /**
+   *  @brief  Open gzipped file.
+   *  @param  name  File name.
+   *  @param  mode  Open mode flags.
+   *  @return  @c this on success, NULL on failure.
+  */
+  gzfilebuf*
+  open(const char* name,
+       std::ios_base::openmode mode);
+
+  /**
+   *  @brief  Attach to already open gzipped file.
+   *  @param  fd  File descriptor.
+   *  @param  mode  Open mode flags.
+   *  @return  @c this on success, NULL on failure.
+  */
+  gzfilebuf*
+  attach(int fd,
+         std::ios_base::openmode mode);
+
+  /**
+   *  @brief  Close gzipped file.
+   *  @return  @c this on success, NULL on failure.
+  */
+  gzfilebuf*
+  close();
+
+protected:
+  /**
+   *  @brief  Convert ios open mode int to mode string used by zlib.
+   *  @return  True if valid mode flag combination.
+  */
+  bool
+  open_mode(std::ios_base::openmode mode,
+            char* c_mode) const;
+
+  /**
+   *  @brief  Number of characters available in stream buffer.
+   *  @return  Number of characters.
+   *
+   *  This indicates number of characters in get area of stream buffer.
+   *  These characters can be read without accessing the gzipped file.
+  */
+  virtual std::streamsize
+  showmanyc();
+
+  /**
+   *  @brief  Fill get area from gzipped file.
+   *  @return  First character in get area on success, EOF on error.
+   *
+   *  This actually reads characters from gzipped file to stream
+   *  buffer. Always buffered.
+  */
+  virtual int_type
+  underflow();
+
+  /**
+   *  @brief  Write put area to gzipped file.
+   *  @param  c  Extra character to add to buffer contents.
+   *  @return  Non-EOF on success, EOF on error.
+   *
+   *  This actually writes characters in stream buffer to
+   *  gzipped file. With unbuffered output this is done one
+   *  character at a time.
+  */
+  virtual int_type
+  overflow(int_type c = traits_type::eof());
+
+  /**
+   *  @brief  Installs external stream buffer.
+   *  @param  p  Pointer to char buffer.
+   *  @param  n  Size of external buffer.
+   *  @return  @c this on success, NULL on failure.
+   *
+   *  Call setbuf(0,0) to enable unbuffered output.
+  */
+  virtual std::streambuf*
+  setbuf(char_type* p,
+         std::streamsize n);
+
+  /**
+   *  @brief  Flush stream buffer to file.
+   *  @return  0 on success, -1 on error.
+   *
+   *  This calls underflow(EOF) to do the job.
+  */
+  virtual int
+  sync();
+
+//
+// Some future enhancements
+//
+//  virtual int_type uflow();
+//  virtual int_type pbackfail(int_type c = traits_type::eof());
+//  virtual pos_type
+//  seekoff(off_type off,
+//          std::ios_base::seekdir way,
+//          std::ios_base::openmode mode = std::ios_base::in|std::ios_base::out);
+//  virtual pos_type
+//  seekpos(pos_type sp,
+//          std::ios_base::openmode mode = std::ios_base::in|std::ios_base::out);
+
+private:
+  /**
+   *  @brief  Allocate internal buffer.
+   *
+   *  This function is safe to call multiple times. It will ensure
+   *  that a proper internal buffer exists if it is required. If the
+   *  buffer already exists or is external, the buffer pointers will be
+   *  reset to their original state.
+  */
+  void
+  enable_buffer();
+
+  /**
+   *  @brief  Destroy internal buffer.
+   *
+   *  This function is safe to call multiple times. It will ensure
+   *  that the internal buffer is deallocated if it exists. In any
+   *  case, it will also reset the buffer pointers.
+  */
+  void
+  disable_buffer();
+
+  /**
+   *  Underlying file pointer.
+  */
+  gzFile file;
+
+  /**
+   *  Mode in which file was opened.
+  */
+  std::ios_base::openmode io_mode;
+
+  /**
+   *  @brief  True if this object owns file descriptor.
+   *
+   *  This makes the class responsible for closing the file
+   *  upon destruction.
+  */
+  bool own_fd;
+
+  /**
+   *  @brief  Stream buffer.
+   *
+   *  For simplicity this remains allocated on the free store for the
+   *  entire life span of the gzfilebuf object, unless replaced by setbuf.
+  */
+  char_type* buffer;
+
+  /**
+   *  @brief  Stream buffer size.
+   *
+   *  Defaults to system default buffer size (typically 8192 bytes).
+   *  Modified by setbuf.
+  */
+  std::streamsize buffer_size;
+
+  /**
+   *  @brief  True if this object owns stream buffer.
+   *
+   *  This makes the class responsible for deleting the buffer
+   *  upon destruction.
+  */
+  bool own_buffer;
+};
+
+/*****************************************************************************/
+
+/**
+ *  @brief  Gzipped file input stream class.
+ *
+ *  This class implements ifstream for gzipped files. Seeking and putback
+ *  is not supported yet.
+*/
+class gzifstream : public std::istream
+{
+public:
+  //  Default constructor
+  gzifstream();
+
+  /**
+   *  @brief  Construct stream on gzipped file to be opened.
+   *  @param  name  File name.
+   *  @param  mode  Open mode flags (forced to contain ios::in).
+  */
+  explicit
+  gzifstream(const char* name,
+             std::ios_base::openmode mode = std::ios_base::in);
+
+  /**
+   *  @brief  Construct stream on already open gzipped file.
+   *  @param  fd    File descriptor.
+   *  @param  mode  Open mode flags (forced to contain ios::in).
+  */
+  explicit
+  gzifstream(int fd,
+             std::ios_base::openmode mode = std::ios_base::in);
+
+  /**
+   *  Obtain underlying stream buffer.
+  */
+  gzfilebuf*
+  rdbuf() const
+  { return const_cast<gzfilebuf*>(&sb); }
+
+  /**
+   *  @brief  Check if file is open.
+   *  @return  True if file is open.
+  */
+  bool
+  is_open() { return sb.is_open(); }
+
+  /**
+   *  @brief  Open gzipped file.
+   *  @param  name  File name.
+   *  @param  mode  Open mode flags (forced to contain ios::in).
+   *
+   *  Stream will be in state good() if file opens successfully;
+   *  otherwise in state fail(). This differs from the behavior of
+   *  ifstream, which never sets the state to good() and therefore
+   *  won't allow you to reuse the stream for a second file unless
+   *  you manually clear() the state. The choice is a matter of
+   *  convenience.
+  */
+  void
+  open(const char* name,
+       std::ios_base::openmode mode = std::ios_base::in);
+
+  /**
+   *  @brief  Attach to already open gzipped file.
+   *  @param  fd  File descriptor.
+   *  @param  mode  Open mode flags (forced to contain ios::in).
+   *
+   *  Stream will be in state good() if attach succeeded; otherwise
+   *  in state fail().
+  */
+  void
+  attach(int fd,
+         std::ios_base::openmode mode = std::ios_base::in);
+
+  /**
+   *  @brief  Close gzipped file.
+   *
+   *  Stream will be in state fail() if close failed.
+  */
+  void
+  close();
+
+private:
+  /**
+   *  Underlying stream buffer.
+  */
+  gzfilebuf sb;
+};
+
+/*****************************************************************************/
+
+/**
+ *  @brief  Gzipped file output stream class.
+ *
+ *  This class implements ofstream for gzipped files. Seeking and putback
+ *  is not supported yet.
+*/
+class gzofstream : public std::ostream
+{
+public:
+  //  Default constructor
+  gzofstream();
+
+  /**
+   *  @brief  Construct stream on gzipped file to be opened.
+   *  @param  name  File name.
+   *  @param  mode  Open mode flags (forced to contain ios::out).
+  */
+  explicit
+  gzofstream(const char* name,
+             std::ios_base::openmode mode = std::ios_base::out);
+
+  /**
+   *  @brief  Construct stream on already open gzipped file.
+   *  @param  fd    File descriptor.
+   *  @param  mode  Open mode flags (forced to contain ios::out).
+  */
+  explicit
+  gzofstream(int fd,
+             std::ios_base::openmode mode = std::ios_base::out);
+
+  /**
+   *  Obtain underlying stream buffer.
+  */
+  gzfilebuf*
+  rdbuf() const
+  { return const_cast<gzfilebuf*>(&sb); }
+
+  /**
+   *  @brief  Check if file is open.
+   *  @return  True if file is open.
+  */
+  bool
+  is_open() { return sb.is_open(); }
+
+  /**
+   *  @brief  Open gzipped file.
+   *  @param  name  File name.
+   *  @param  mode  Open mode flags (forced to contain ios::out).
+   *
+   *  Stream will be in state good() if file opens successfully;
+   *  otherwise in state fail(). This differs from the behavior of
+   *  ofstream, which never sets the state to good() and therefore
+   *  won't allow you to reuse the stream for a second file unless
+   *  you manually clear() the state. The choice is a matter of
+   *  convenience.
+  */
+  void
+  open(const char* name,
+       std::ios_base::openmode mode = std::ios_base::out);
+
+  /**
+   *  @brief  Attach to already open gzipped file.
+   *  @param  fd  File descriptor.
+   *  @param  mode  Open mode flags (forced to contain ios::out).
+   *
+   *  Stream will be in state good() if attach succeeded; otherwise
+   *  in state fail().
+  */
+  void
+  attach(int fd,
+         std::ios_base::openmode mode = std::ios_base::out);
+
+  /**
+   *  @brief  Close gzipped file.
+   *
+   *  Stream will be in state fail() if close failed.
+  */
+  void
+  close();
+
+private:
+  /**
+   *  Underlying stream buffer.
+  */
+  gzfilebuf sb;
+};
+
+/*****************************************************************************/
+
+/**
+ *  @brief  Gzipped file output stream manipulator class.
+ *
+ *  This class defines a two-argument manipulator for gzofstream. It is used
+ *  as base for the setcompression(int,int) manipulator.
+*/
+template<typename T1, typename T2>
+  class gzomanip2
+  {
+  public:
+    // Allows insertor to peek at internals
+    template <typename Ta, typename Tb>
+      friend gzofstream&
+      operator<<(gzofstream&,
+                 const gzomanip2<Ta,Tb>&);
+
+    // Constructor
+    gzomanip2(gzofstream& (*f)(gzofstream&, T1, T2),
+              T1 v1,
+              T2 v2);
+  private:
+    // Underlying manipulator function
+    gzofstream&
+    (*func)(gzofstream&, T1, T2);
+
+    // Arguments for manipulator function
+    T1 val1;
+    T2 val2;
+  };
+
+/*****************************************************************************/
+
+// Manipulator function thunks through to stream buffer
+inline gzofstream&
+setcompression(gzofstream &gzs, int l, int s = Z_DEFAULT_STRATEGY)
+{
+  (gzs.rdbuf())->setcompression(l, s);
+  return gzs;
+}
+
+// Manipulator constructor stores arguments
+template<typename T1, typename T2>
+  inline
+  gzomanip2<T1,T2>::gzomanip2(gzofstream &(*f)(gzofstream &, T1, T2),
+                              T1 v1,
+                              T2 v2)
+  : func(f), val1(v1), val2(v2)
+  { }
+
+// Insertor applies underlying manipulator function to stream
+template<typename T1, typename T2>
+  inline gzofstream&
+  operator<<(gzofstream& s, const gzomanip2<T1,T2>& m)
+  { return (*m.func)(s, m.val1, m.val2); }
+
+// Insert this onto stream to simplify setting of compression level
+inline gzomanip2<int,int>
+setcompression(int l, int s = Z_DEFAULT_STRATEGY)
+{ return gzomanip2<int,int>(&setcompression, l, s); }
+
+#endif // ZFSTREAM_H

contrib/masmx64/bld_ml64.bat

@@ -0,0 +1,2 @@
+ml64.exe /Flinffasx64 /c /Zi inffasx64.asm
+ml64.exe /Flgvmat64   /c /Zi gvmat64.asm

contrib/masmx64/gvmat64.asm

@@ -0,0 +1,553 @@
+;uInt longest_match_x64(
+;    deflate_state *s,
+;    IPos cur_match);                             /* current match */
+
+; gvmat64.asm -- Asm portion of the optimized longest_match for 32 bits x86_64
+;  (AMD64 on Athlon 64, Opteron, Phenom
+;     and Intel EM64T on Pentium 4 with EM64T, Pentium D, Core 2 Duo, Core I5/I7)
+; Copyright (C) 1995-2010 Jean-loup Gailly, Brian Raiter and Gilles Vollant.
+;
+; File written by Gilles Vollant, by converting to assembly the longest_match
+;  from Jean-loup Gailly in deflate.c of zLib and infoZip zip.
+;
+;  and by taking inspiration on asm686 with masm, optimised assembly code
+;        from Brian Raiter, written 1998
+;
+;  This software is provided 'as-is', without any express or implied
+;  warranty.  In no event will the authors be held liable for any damages
+;  arising from the use of this software.
+;
+;  Permission is granted to anyone to use this software for any purpose,
+;  including commercial applications, and to alter it and redistribute it
+;  freely, subject to the following restrictions:
+;
+;  1. The origin of this software must not be misrepresented; you must not
+;     claim that you wrote the original software. If you use this software
+;     in a product, an acknowledgment in the product documentation would be
+;     appreciated but is not required.
+;  2. Altered source versions must be plainly marked as such, and must not be
+;     misrepresented as being the original software
+;  3. This notice may not be removed or altered from any source distribution.
+;
+;
+;
+;         http://www.zlib.net
+;         http://www.winimage.com/zLibDll
+;         http://www.muppetlabs.com/~breadbox/software/assembly.html
+;
+; to compile this file for infozip Zip, I use option:
+;   ml64.exe /Flgvmat64 /c /Zi /DINFOZIP gvmat64.asm
+;
+; to compile this file for zLib, I use option:
+;   ml64.exe /Flgvmat64 /c /Zi gvmat64.asm
+; Be carrefull to adapt zlib1222add below to your version of zLib
+;   (if you use a version of zLib before 1.0.4 or after 1.2.2.2, change
+;    value of zlib1222add later)
+;
+; This file compile with Microsoft Macro Assembler (x64) for AMD64
+;
+;   ml64.exe is given with Visual Studio 2005/2008/2010 and Windows WDK
+;
+;   (you can get Windows WDK with ml64 for AMD64 from
+;      http://www.microsoft.com/whdc/Devtools/wdk/default.mspx for low price)
+;
+
+
+;uInt longest_match(s, cur_match)
+;    deflate_state *s;
+;    IPos cur_match;                             /* current match */
+.code
+longest_match PROC
+
+
+;LocalVarsSize   equ 88
+ LocalVarsSize   equ 72
+
+; register used : rax,rbx,rcx,rdx,rsi,rdi,r8,r9,r10,r11,r12
+; free register :  r14,r15
+; register can be saved : rsp
+
+ chainlenwmask   equ  rsp + 8 - LocalVarsSize    ; high word: current chain len
+                                                 ; low word: s->wmask
+;window          equ  rsp + xx - LocalVarsSize   ; local copy of s->window ; stored in r10
+;windowbestlen   equ  rsp + xx - LocalVarsSize   ; s->window + bestlen , use r10+r11
+;scanstart       equ  rsp + xx - LocalVarsSize   ; first two bytes of string ; stored in r12w
+;scanend         equ  rsp + xx - LocalVarsSize   ; last two bytes of string use ebx
+;scanalign       equ  rsp + xx - LocalVarsSize   ; dword-misalignment of string r13
+;bestlen         equ  rsp + xx - LocalVarsSize   ; size of best match so far -> r11d
+;scan            equ  rsp + xx - LocalVarsSize   ; ptr to string wanting match -> r9
+IFDEF INFOZIP
+ELSE
+ nicematch       equ  (rsp + 16 - LocalVarsSize) ; a good enough match size
+ENDIF
+
+save_rdi        equ  rsp + 24 - LocalVarsSize
+save_rsi        equ  rsp + 32 - LocalVarsSize
+save_rbx        equ  rsp + 40 - LocalVarsSize
+save_rbp        equ  rsp + 48 - LocalVarsSize
+save_r12        equ  rsp + 56 - LocalVarsSize
+save_r13        equ  rsp + 64 - LocalVarsSize
+;save_r14        equ  rsp + 72 - LocalVarsSize
+;save_r15        equ  rsp + 80 - LocalVarsSize
+
+
+; summary of register usage
+; scanend     ebx
+; scanendw    bx
+; chainlenwmask   edx
+; curmatch    rsi
+; curmatchd   esi
+; windowbestlen   r8
+; scanalign   r9
+; scanalignd  r9d
+; window      r10
+; bestlen     r11
+; bestlend    r11d
+; scanstart   r12d
+; scanstartw  r12w
+; scan        r13
+; nicematch   r14d
+; limit       r15
+; limitd      r15d
+; prev        rcx
+
+;  all the +4 offsets are due to the addition of pending_buf_size (in zlib
+;  in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, remove the +4).
+;  Note : these value are good with a 8 bytes boundary pack structure
+
+
+    MAX_MATCH           equ     258
+    MIN_MATCH           equ     3
+    MIN_LOOKAHEAD       equ     (MAX_MATCH+MIN_MATCH+1)
+
+
+;;; Offsets for fields in the deflate_state structure. These numbers
+;;; are calculated from the definition of deflate_state, with the
+;;; assumption that the compiler will dword-align the fields. (Thus,
+;;; changing the definition of deflate_state could easily cause this
+;;; program to crash horribly, without so much as a warning at
+;;; compile time. Sigh.)
+
+;  all the +zlib1222add offsets are due to the addition of fields
+;  in zlib in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+;  (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+;  if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
+
+
+IFDEF INFOZIP
+
+_DATA   SEGMENT
+COMM    window_size:DWORD
+; WMask ; 7fff
+COMM    window:BYTE:010040H
+COMM    prev:WORD:08000H
+; MatchLen : unused
+; PrevMatch : unused
+COMM    strstart:DWORD
+COMM    match_start:DWORD
+; Lookahead : ignore
+COMM    prev_length:DWORD ; PrevLen
+COMM    max_chain_length:DWORD
+COMM    good_match:DWORD
+COMM    nice_match:DWORD
+prev_ad equ OFFSET prev
+window_ad equ OFFSET window
+nicematch equ nice_match
+_DATA ENDS
+WMask equ 07fffh
+
+ELSE
+
+  IFNDEF zlib1222add
+    zlib1222add equ 8
+  ENDIF
+dsWSize         equ 56+zlib1222add+(zlib1222add/2)
+dsWMask         equ 64+zlib1222add+(zlib1222add/2)
+dsWindow        equ 72+zlib1222add
+dsPrev          equ 88+zlib1222add
+dsMatchLen      equ 128+zlib1222add
+dsPrevMatch     equ 132+zlib1222add
+dsStrStart      equ 140+zlib1222add
+dsMatchStart    equ 144+zlib1222add
+dsLookahead     equ 148+zlib1222add
+dsPrevLen       equ 152+zlib1222add
+dsMaxChainLen   equ 156+zlib1222add
+dsGoodMatch     equ 172+zlib1222add
+dsNiceMatch     equ 176+zlib1222add
+
+window_size     equ [ rcx + dsWSize]
+WMask           equ [ rcx + dsWMask]
+window_ad       equ [ rcx + dsWindow]
+prev_ad         equ [ rcx + dsPrev]
+strstart        equ [ rcx + dsStrStart]
+match_start     equ [ rcx + dsMatchStart]
+Lookahead       equ [ rcx + dsLookahead] ; 0ffffffffh on infozip
+prev_length     equ [ rcx + dsPrevLen]
+max_chain_length equ [ rcx + dsMaxChainLen]
+good_match      equ [ rcx + dsGoodMatch]
+nice_match      equ [ rcx + dsNiceMatch]
+ENDIF
+
+; parameter 1 in r8(deflate state s), param 2 in rdx (cur match)
+
+; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and
+; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp
+;
+; All registers must be preserved across the call, except for
+;   rax, rcx, rdx, r8, r9, r10, and r11, which are scratch.
+
+
+
+;;; Save registers that the compiler may be using, and adjust esp to
+;;; make room for our stack frame.
+
+
+;;; Retrieve the function arguments. r8d will hold cur_match
+;;; throughout the entire function. edx will hold the pointer to the
+;;; deflate_state structure during the function's setup (before
+;;; entering the main loop.
+
+; parameter 1 in rcx (deflate_state* s), param 2 in edx -> r8 (cur match)
+
+; this clear high 32 bits of r8, which can be garbage in both r8 and rdx
+
+        mov [save_rdi],rdi
+        mov [save_rsi],rsi
+        mov [save_rbx],rbx
+        mov [save_rbp],rbp
+IFDEF INFOZIP
+        mov r8d,ecx
+ELSE
+        mov r8d,edx
+ENDIF
+        mov [save_r12],r12
+        mov [save_r13],r13
+;        mov [save_r14],r14
+;        mov [save_r15],r15
+
+
+;;; uInt wmask = s->w_mask;
+;;; unsigned chain_length = s->max_chain_length;
+;;; if (s->prev_length >= s->good_match) {
+;;;     chain_length >>= 2;
+;;; }
+
+        mov edi, prev_length
+        mov esi, good_match
+        mov eax, WMask
+        mov ebx, max_chain_length
+        cmp edi, esi
+        jl  LastMatchGood
+        shr ebx, 2
+LastMatchGood:
+
+;;; chainlen is decremented once beforehand so that the function can
+;;; use the sign flag instead of the zero flag for the exit test.
+;;; It is then shifted into the high word, to make room for the wmask
+;;; value, which it will always accompany.
+
+        dec ebx
+        shl ebx, 16
+        or  ebx, eax
+
+;;; on zlib only
+;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+IFDEF INFOZIP
+        mov [chainlenwmask], ebx
+; on infozip nice_match = [nice_match]
+ELSE
+        mov eax, nice_match
+        mov [chainlenwmask], ebx
+        mov r10d, Lookahead
+        cmp r10d, eax
+        cmovnl r10d, eax
+        mov [nicematch],r10d
+ENDIF
+
+;;; register Bytef *scan = s->window + s->strstart;
+        mov r10, window_ad
+        mov ebp, strstart
+        lea r13, [r10 + rbp]
+
+;;; Determine how many bytes the scan ptr is off from being
+;;; dword-aligned.
+
+         mov r9,r13
+         neg r13
+         and r13,3
+
+;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+;;;     s->strstart - (IPos)MAX_DIST(s) : NIL;
+IFDEF INFOZIP
+        mov eax,07efah ; MAX_DIST = (WSIZE-MIN_LOOKAHEAD) (0x8000-(3+8+1))
+ELSE
+        mov eax, window_size
+        sub eax, MIN_LOOKAHEAD
+ENDIF
+        xor edi,edi
+        sub ebp, eax
+
+        mov r11d, prev_length
+
+        cmovng ebp,edi
+
+;;; int best_len = s->prev_length;
+
+
+;;; Store the sum of s->window + best_len in esi locally, and in esi.
+
+       lea  rsi,[r10+r11]
+
+;;; register ush scan_start = *(ushf*)scan;
+;;; register ush scan_end   = *(ushf*)(scan+best_len-1);
+;;; Posf *prev = s->prev;
+
+        movzx r12d,word ptr [r9]
+        movzx ebx, word ptr [r9 + r11 - 1]
+
+        mov rdi, prev_ad
+
+;;; Jump into the main loop.
+
+        mov edx, [chainlenwmask]
+
+        cmp bx,word ptr [rsi + r8 - 1]
+        jz  LookupLoopIsZero
+
+LookupLoop1:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+
+LoopEntry1:
+        cmp bx,word ptr [rsi + r8 - 1]
+        jz  LookupLoopIsZero
+
+LookupLoop2:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+
+LoopEntry2:
+        cmp bx,word ptr [rsi + r8 - 1]
+        jz  LookupLoopIsZero
+
+LookupLoop4:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+
+LoopEntry4:
+
+        cmp bx,word ptr [rsi + r8 - 1]
+        jnz LookupLoop1
+        jmp LookupLoopIsZero
+
+
+;;; do {
+;;;     match = s->window + cur_match;
+;;;     if (*(ushf*)(match+best_len-1) != scan_end ||
+;;;         *(ushf*)match != scan_start) continue;
+;;;     [...]
+;;; } while ((cur_match = prev[cur_match & wmask]) > limit
+;;;          && --chain_length != 0);
+;;;
+;;; Here is the inner loop of the function. The function will spend the
+;;; majority of its time in this loop, and majority of that time will
+;;; be spent in the first ten instructions.
+;;;
+;;; Within this loop:
+;;; ebx = scanend
+;;; r8d = curmatch
+;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
+;;; esi = windowbestlen - i.e., (window + bestlen)
+;;; edi = prev
+;;; ebp = limit
+
+LookupLoop:
+        and r8d, edx
+
+        movzx   r8d, word ptr [rdi + r8*2]
+        cmp r8d, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+
+LoopEntry:
+
+        cmp bx,word ptr [rsi + r8 - 1]
+        jnz LookupLoop1
+LookupLoopIsZero:
+        cmp     r12w, word ptr [r10 + r8]
+        jnz LookupLoop1
+
+
+;;; Store the current value of chainlen.
+        mov [chainlenwmask], edx
+
+;;; Point edi to the string under scrutiny, and esi to the string we
+;;; are hoping to match it up with. In actuality, esi and edi are
+;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is
+;;; initialized to -(MAX_MATCH_8 - scanalign).
+
+        lea rsi,[r8+r10]
+        mov rdx, 0fffffffffffffef8h; -(MAX_MATCH_8)
+        lea rsi, [rsi + r13 + 0108h] ;MAX_MATCH_8]
+        lea rdi, [r9 + r13 + 0108h] ;MAX_MATCH_8]
+
+        prefetcht1 [rsi+rdx]
+        prefetcht1 [rdi+rdx]
+
+
+;;; Test the strings for equality, 8 bytes at a time. At the end,
+;;; adjust rdx so that it is offset to the exact byte that mismatched.
+;;;
+;;; We already know at this point that the first three bytes of the
+;;; strings match each other, and they can be safely passed over before
+;;; starting the compare loop. So what this code does is skip over 0-3
+;;; bytes, as much as necessary in order to dword-align the edi
+;;; pointer. (rsi will still be misaligned three times out of four.)
+;;;
+;;; It should be confessed that this loop usually does not represent
+;;; much of the total running time. Replacing it with a more
+;;; straightforward "rep cmpsb" would not drastically degrade
+;;; performance.
+
+
+LoopCmps:
+        mov rax, [rsi + rdx]
+        xor rax, [rdi + rdx]
+        jnz LeaveLoopCmps
+
+        mov rax, [rsi + rdx + 8]
+        xor rax, [rdi + rdx + 8]
+        jnz LeaveLoopCmps8
+
+
+        mov rax, [rsi + rdx + 8+8]
+        xor rax, [rdi + rdx + 8+8]
+        jnz LeaveLoopCmps16
+
+        add rdx,8+8+8
+
+        jnz short LoopCmps
+        jmp short LenMaximum
+LeaveLoopCmps16: add rdx,8
+LeaveLoopCmps8: add rdx,8
+LeaveLoopCmps:
+
+        test    eax, 0000FFFFh
+        jnz LenLower
+
+        test eax,0ffffffffh
+
+        jnz LenLower32
+
+        add rdx,4
+        shr rax,32
+        or ax,ax
+        jnz LenLower
+
+LenLower32:
+        shr eax,16
+        add rdx,2
+LenLower:   sub al, 1
+        adc rdx, 0
+;;; Calculate the length of the match. If it is longer than MAX_MATCH,
+;;; then automatically accept it as the best possible match and leave.
+
+        lea rax, [rdi + rdx]
+        sub rax, r9
+        cmp eax, MAX_MATCH
+        jge LenMaximum
+
+;;; If the length of the match is not longer than the best match we
+;;; have so far, then forget it and return to the lookup loop.
+;///////////////////////////////////
+
+        cmp eax, r11d
+        jg  LongerMatch
+
+        lea rsi,[r10+r11]
+
+        mov rdi, prev_ad
+        mov edx, [chainlenwmask]
+        jmp LookupLoop
+
+;;;         s->match_start = cur_match;
+;;;         best_len = len;
+;;;         if (len >= nice_match) break;
+;;;         scan_end = *(ushf*)(scan+best_len-1);
+
+LongerMatch:
+        mov r11d, eax
+        mov match_start, r8d
+        cmp eax, [nicematch]
+        jge LeaveNow
+
+        lea rsi,[r10+rax]
+
+        movzx   ebx, word ptr [r9 + rax - 1]
+        mov rdi, prev_ad
+        mov edx, [chainlenwmask]
+        jmp LookupLoop
+
+;;; Accept the current string, with the maximum possible length.
+
+LenMaximum:
+        mov r11d,MAX_MATCH
+        mov match_start, r8d
+
+;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+;;; return s->lookahead;
+
+LeaveNow:
+IFDEF INFOZIP
+        mov eax,r11d
+ELSE
+        mov eax, Lookahead
+        cmp r11d, eax
+        cmovng eax, r11d
+ENDIF
+
+;;; Restore the stack and return from whence we came.
+
+
+        mov rsi,[save_rsi]
+        mov rdi,[save_rdi]
+        mov rbx,[save_rbx]
+        mov rbp,[save_rbp]
+        mov r12,[save_r12]
+        mov r13,[save_r13]
+;        mov r14,[save_r14]
+;        mov r15,[save_r15]
+
+
+        ret 0
+; please don't remove this string !
+; Your can freely use gvmat64 in any free or commercial app
+; but it is far better don't remove the string in the binary!
+    db     0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998, converted to amd 64 by Gilles Vollant 2005",0dh,0ah,0
+longest_match   ENDP
+
+match_init PROC
+  ret 0
+match_init ENDP
+
+
+END

contrib/masmx64/inffas8664.c

@@ -0,0 +1,186 @@
+/* inffas8664.c is a hand tuned assembler version of inffast.c - fast decoding
+ * version for AMD64 on Windows using Microsoft C compiler
+ *
+ * Copyright (C) 1995-2003 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Copyright (C) 2003 Chris Anderson <christop@charm.net>
+ * Please use the copyright conditions above.
+ *
+ * 2005 - Adaptation to Microsoft C Compiler for AMD64 by Gilles Vollant
+ *
+ * inffas8664.c call function inffas8664fnc in inffasx64.asm
+ *  inffasx64.asm is automatically convert from AMD64 portion of inffas86.c
+ *
+ * Dec-29-2003 -- I added AMD64 inflate asm support.  This version is also
+ * slightly quicker on x86 systems because, instead of using rep movsb to copy
+ * data, it uses rep movsw, which moves data in 2-byte chunks instead of single
+ * bytes.  I've tested the AMD64 code on a Fedora Core 1 + the x86_64 updates
+ * from http://fedora.linux.duke.edu/fc1_x86_64
+ * which is running on an Athlon 64 3000+ / Gigabyte GA-K8VT800M system with
+ * 1GB ram.  The 64-bit version is about 4% faster than the 32-bit version,
+ * when decompressing mozilla-source-1.3.tar.gz.
+ *
+ * Mar-13-2003 -- Most of this is derived from inffast.S which is derived from
+ * the gcc -S output of zlib-1.2.0/inffast.c.  Zlib-1.2.0 is in beta release at
+ * the moment.  I have successfully compiled and tested this code with gcc2.96,
+ * gcc3.2, icc5.0, msvc6.0.  It is very close to the speed of inffast.S
+ * compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX
+ * enabled.  I will attempt to merge the MMX code into this version.  Newer
+ * versions of this and inffast.S can be found at
+ * http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/
+ *
+ */
+
+#include <stdio.h>
+#include "zutil.h"
+#include "inftrees.h"
+#include "inflate.h"
+#include "inffast.h"
+
+/* Mark Adler's comments from inffast.c: */
+
+/*
+   Decode literal, length, and distance codes and write out the resulting
+   literal and match bytes until either not enough input or output is
+   available, an end-of-block is encountered, or a data error is encountered.
+   When large enough input and output buffers are supplied to inflate(), for
+   example, a 16K input buffer and a 64K output buffer, more than 95% of the
+   inflate execution time is spent in this routine.
+
+   Entry assumptions:
+
+        state->mode == LEN
+        strm->avail_in >= 6
+        strm->avail_out >= 258
+        start >= strm->avail_out
+        state->bits < 8
+
+   On return, state->mode is one of:
+
+        LEN -- ran out of enough output space or enough available input
+        TYPE -- reached end of block code, inflate() to interpret next block
+        BAD -- error in block data
+
+   Notes:
+
+    - The maximum input bits used by a length/distance pair is 15 bits for the
+      length code, 5 bits for the length extra, 15 bits for the distance code,
+      and 13 bits for the distance extra.  This totals 48 bits, or six bytes.
+      Therefore if strm->avail_in >= 6, then there is enough input to avoid
+      checking for available input while decoding.
+
+    - The maximum bytes that a single length/distance pair can output is 258
+      bytes, which is the maximum length that can be coded.  inflate_fast()
+      requires strm->avail_out >= 258 for each loop to avoid checking for
+      output space.
+ */
+
+
+
+    typedef struct inffast_ar {
+/* 64   32                               x86  x86_64 */
+/* ar offset                              register */
+/*  0    0 */ void *esp;                /* esp save */
+/*  8    4 */ void *ebp;                /* ebp save */
+/* 16    8 */ unsigned char FAR *in;    /* esi rsi  local strm->next_in */
+/* 24   12 */ unsigned char FAR *last;  /*     r9   while in < last */
+/* 32   16 */ unsigned char FAR *out;   /* edi rdi  local strm->next_out */
+/* 40   20 */ unsigned char FAR *beg;   /*          inflate()'s init next_out */
+/* 48   24 */ unsigned char FAR *end;   /*     r10  while out < end */
+/* 56   28 */ unsigned char FAR *window;/*          size of window, wsize!=0 */
+/* 64   32 */ code const FAR *lcode;    /* ebp rbp  local strm->lencode */
+/* 72   36 */ code const FAR *dcode;    /*     r11  local strm->distcode */
+/* 80   40 */ size_t /*unsigned long */hold;       /* edx rdx  local strm->hold */
+/* 88   44 */ unsigned bits;            /* ebx rbx  local strm->bits */
+/* 92   48 */ unsigned wsize;           /*          window size */
+/* 96   52 */ unsigned write;           /*          window write index */
+/*100   56 */ unsigned lmask;           /*     r12  mask for lcode */
+/*104   60 */ unsigned dmask;           /*     r13  mask for dcode */
+/*108   64 */ unsigned len;             /*     r14  match length */
+/*112   68 */ unsigned dist;            /*     r15  match distance */
+/*116   72 */ unsigned status;          /*          set when state chng*/
+    } type_ar;
+#ifdef ASMINF
+
+void inflate_fast(strm, start)
+z_streamp strm;
+unsigned start;         /* inflate()'s starting value for strm->avail_out */
+{
+    struct inflate_state FAR *state;
+    type_ar ar;
+    void inffas8664fnc(struct inffast_ar * par);
+
+
+
+#if (defined( __GNUC__ ) && defined( __amd64__ ) && ! defined( __i386 )) || (defined(_MSC_VER) && defined(_M_AMD64))
+#define PAD_AVAIL_IN 6
+#define PAD_AVAIL_OUT 258
+#else
+#define PAD_AVAIL_IN 5
+#define PAD_AVAIL_OUT 257
+#endif
+
+    /* copy state to local variables */
+    state = (struct inflate_state FAR *)strm->state;
+
+    ar.in = strm->next_in;
+    ar.last = ar.in + (strm->avail_in - PAD_AVAIL_IN);
+    ar.out = strm->next_out;
+    ar.beg = ar.out - (start - strm->avail_out);
+    ar.end = ar.out + (strm->avail_out - PAD_AVAIL_OUT);
+    ar.wsize = state->wsize;
+    ar.write = state->wnext;
+    ar.window = state->window;
+    ar.hold = state->hold;
+    ar.bits = state->bits;
+    ar.lcode = state->lencode;
+    ar.dcode = state->distcode;
+    ar.lmask = (1U << state->lenbits) - 1;
+    ar.dmask = (1U << state->distbits) - 1;
+
+    /* decode literals and length/distances until end-of-block or not enough
+       input data or output space */
+
+    /* align in on 1/2 hold size boundary */
+    while (((size_t)(void *)ar.in & (sizeof(ar.hold) / 2 - 1)) != 0) {
+        ar.hold += (unsigned long)*ar.in++ << ar.bits;
+        ar.bits += 8;
+    }
+
+    inffas8664fnc(&ar);
+
+    if (ar.status > 1) {
+        if (ar.status == 2)
+            strm->msg = "invalid literal/length code";
+        else if (ar.status == 3)
+            strm->msg = "invalid distance code";
+        else
+            strm->msg = "invalid distance too far back";
+        state->mode = BAD;
+    }
+    else if ( ar.status == 1 ) {
+        state->mode = TYPE;
+    }
+
+    /* return unused bytes (on entry, bits < 8, so in won't go too far back) */
+    ar.len = ar.bits >> 3;
+    ar.in -= ar.len;
+    ar.bits -= ar.len << 3;
+    ar.hold &= (1U << ar.bits) - 1;
+
+    /* update state and return */
+    strm->next_in = ar.in;
+    strm->next_out = ar.out;
+    strm->avail_in = (unsigned)(ar.in < ar.last ?
+                                PAD_AVAIL_IN + (ar.last - ar.in) :
+                                PAD_AVAIL_IN - (ar.in - ar.last));
+    strm->avail_out = (unsigned)(ar.out < ar.end ?
+                                 PAD_AVAIL_OUT + (ar.end - ar.out) :
+                                 PAD_AVAIL_OUT - (ar.out - ar.end));
+    state->hold = (unsigned long)ar.hold;
+    state->bits = ar.bits;
+    return;
+}
+
+#endif

contrib/masmx64/inffasx64.asm

@@ -0,0 +1,396 @@
+; inffasx64.asm is a hand tuned assembler version of inffast.c - fast decoding
+; version for AMD64 on Windows using Microsoft C compiler
+;
+; inffasx64.asm is automatically convert from AMD64 portion of inffas86.c
+; inffasx64.asm is called by inffas8664.c, which contain more info.
+
+
+; to compile this file, I use option
+;   ml64.exe /Flinffasx64 /c /Zi inffasx64.asm
+;   with Microsoft Macro Assembler (x64) for AMD64
+;
+
+; This file compile with Microsoft Macro Assembler (x64) for AMD64
+;
+;   ml64.exe is given with Visual Studio 2005/2008/2010 and Windows WDK
+;
+;   (you can get Windows WDK with ml64 for AMD64 from
+;      http://www.microsoft.com/whdc/Devtools/wdk/default.mspx for low price)
+;
+
+
+.code
+inffas8664fnc PROC
+
+; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and
+; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp
+;
+; All registers must be preserved across the call, except for
+;   rax, rcx, rdx, r8, r-9, r10, and r11, which are scratch.
+
+
+	mov [rsp-8],rsi
+	mov [rsp-16],rdi
+	mov [rsp-24],r12
+	mov [rsp-32],r13
+	mov [rsp-40],r14
+	mov [rsp-48],r15
+	mov [rsp-56],rbx
+
+	mov rax,rcx
+
+	mov	[rax+8], rbp       ; /* save regs rbp and rsp */
+	mov	[rax], rsp
+
+	mov	rsp, rax          ; /* make rsp point to &ar */
+
+	mov	rsi, [rsp+16]      ; /* rsi  = in */
+	mov	rdi, [rsp+32]      ; /* rdi  = out */
+	mov	r9, [rsp+24]       ; /* r9   = last */
+	mov	r10, [rsp+48]      ; /* r10  = end */
+	mov	rbp, [rsp+64]      ; /* rbp  = lcode */
+	mov	r11, [rsp+72]      ; /* r11  = dcode */
+	mov	rdx, [rsp+80]      ; /* rdx  = hold */
+	mov	ebx, [rsp+88]      ; /* ebx  = bits */
+	mov	r12d, [rsp+100]    ; /* r12d = lmask */
+	mov	r13d, [rsp+104]    ; /* r13d = dmask */
+                                          ; /* r14d = len */
+                                          ; /* r15d = dist */
+
+
+	cld
+	cmp	r10, rdi
+	je	L_one_time           ; /* if only one decode left */
+	cmp	r9, rsi
+
+    jne L_do_loop
+
+
+L_one_time:
+	mov	r8, r12           ; /* r8 = lmask */
+	cmp	bl, 32
+	ja	L_get_length_code_one_time
+
+	lodsd                         ; /* eax = *(uint *)in++ */
+	mov	cl, bl            ; /* cl = bits, needs it for shifting */
+	add	bl, 32             ; /* bits += 32 */
+	shl	rax, cl
+	or	rdx, rax          ; /* hold |= *((uint *)in)++ << bits */
+	jmp	L_get_length_code_one_time
+
+ALIGN 4
+L_while_test:
+	cmp	r10, rdi
+	jbe	L_break_loop
+	cmp	r9, rsi
+	jbe	L_break_loop
+
+L_do_loop:
+	mov	r8, r12           ; /* r8 = lmask */
+	cmp	bl, 32
+	ja	L_get_length_code    ; /* if (32 < bits) */
+
+	lodsd                         ; /* eax = *(uint *)in++ */
+	mov	cl, bl            ; /* cl = bits, needs it for shifting */
+	add	bl, 32             ; /* bits += 32 */
+	shl	rax, cl
+	or	rdx, rax          ; /* hold |= *((uint *)in)++ << bits */
+
+L_get_length_code:
+	and	r8, rdx            ; /* r8 &= hold */
+	mov	eax, [rbp+r8*4]  ; /* eax = lcode[hold & lmask] */
+
+	mov	cl, ah            ; /* cl = this.bits */
+	sub	bl, ah            ; /* bits -= this.bits */
+	shr	rdx, cl           ; /* hold >>= this.bits */
+
+	test	al, al
+	jnz	L_test_for_length_base ; /* if (op != 0) 45.7% */
+
+	mov	r8, r12            ; /* r8 = lmask */
+	shr	eax, 16            ; /* output this.val char */
+	stosb
+
+L_get_length_code_one_time:
+	and	r8, rdx            ; /* r8 &= hold */
+	mov	eax, [rbp+r8*4] ; /* eax = lcode[hold & lmask] */
+
+L_dolen:
+	mov	cl, ah            ; /* cl = this.bits */
+	sub	bl, ah            ; /* bits -= this.bits */
+	shr	rdx, cl           ; /* hold >>= this.bits */
+
+	test	al, al
+	jnz	L_test_for_length_base ; /* if (op != 0) 45.7% */
+
+	shr	eax, 16            ; /* output this.val char */
+	stosb
+	jmp	L_while_test
+
+ALIGN 4
+L_test_for_length_base:
+	mov	r14d, eax         ; /* len = this */
+	shr	r14d, 16           ; /* len = this.val */
+	mov	cl, al
+
+	test	al, 16
+	jz	L_test_for_second_level_length ; /* if ((op & 16) == 0) 8% */
+	and	cl, 15             ; /* op &= 15 */
+	jz	L_decode_distance    ; /* if (!op) */
+
+L_add_bits_to_len:
+	sub	bl, cl
+	xor	eax, eax
+	inc	eax
+	shl	eax, cl
+	dec	eax
+	and	eax, edx          ; /* eax &= hold */
+	shr	rdx, cl
+	add	r14d, eax         ; /* len += hold & mask[op] */
+
+L_decode_distance:
+	mov	r8, r13           ; /* r8 = dmask */
+	cmp	bl, 32
+	ja	L_get_distance_code  ; /* if (32 < bits) */
+
+	lodsd                         ; /* eax = *(uint *)in++ */
+	mov	cl, bl            ; /* cl = bits, needs it for shifting */
+	add	bl, 32             ; /* bits += 32 */
+	shl	rax, cl
+	or	rdx, rax          ; /* hold |= *((uint *)in)++ << bits */
+
+L_get_distance_code:
+	and	r8, rdx           ; /* r8 &= hold */
+	mov	eax, [r11+r8*4] ; /* eax = dcode[hold & dmask] */
+
+L_dodist:
+	mov	r15d, eax         ; /* dist = this */
+	shr	r15d, 16           ; /* dist = this.val */
+	mov	cl, ah
+	sub	bl, ah            ; /* bits -= this.bits */
+	shr	rdx, cl           ; /* hold >>= this.bits */
+	mov	cl, al            ; /* cl = this.op */
+
+	test	al, 16             ; /* if ((op & 16) == 0) */
+	jz	L_test_for_second_level_dist
+	and	cl, 15             ; /* op &= 15 */
+	jz	L_check_dist_one
+
+L_add_bits_to_dist:
+	sub	bl, cl
+	xor	eax, eax
+	inc	eax
+	shl	eax, cl
+	dec	eax                 ; /* (1 << op) - 1 */
+	and	eax, edx          ; /* eax &= hold */
+	shr	rdx, cl
+	add	r15d, eax         ; /* dist += hold & ((1 << op) - 1) */
+
+L_check_window:
+	mov	r8, rsi           ; /* save in so from can use it's reg */
+	mov	rax, rdi
+	sub	rax, [rsp+40]      ; /* nbytes = out - beg */
+
+	cmp	eax, r15d
+	jb	L_clip_window        ; /* if (dist > nbytes) 4.2% */
+
+	mov	ecx, r14d         ; /* ecx = len */
+	mov	rsi, rdi
+	sub	rsi, r15          ; /* from = out - dist */
+
+	sar	ecx, 1
+	jnc	L_copy_two           ; /* if len % 2 == 0 */
+
+	rep     movsw
+	mov	al, [rsi]
+	mov	[rdi], al
+	inc	rdi
+
+	mov	rsi, r8           ; /* move in back to %rsi, toss from */
+	jmp	L_while_test
+
+L_copy_two:
+	rep     movsw
+	mov	rsi, r8           ; /* move in back to %rsi, toss from */
+	jmp	L_while_test
+
+ALIGN 4
+L_check_dist_one:
+	cmp	r15d, 1            ; /* if dist 1, is a memset */
+	jne	L_check_window
+	cmp	[rsp+40], rdi      ; /* if out == beg, outside window */
+	je	L_check_window
+
+	mov	ecx, r14d         ; /* ecx = len */
+	mov	al, [rdi-1]
+	mov	ah, al
+
+	sar	ecx, 1
+	jnc	L_set_two
+	mov	[rdi], al
+	inc	rdi
+
+L_set_two:
+	rep     stosw
+	jmp	L_while_test
+
+ALIGN 4
+L_test_for_second_level_length:
+	test	al, 64
+	jnz	L_test_for_end_of_block ; /* if ((op & 64) != 0) */
+
+	xor	eax, eax
+	inc	eax
+	shl	eax, cl
+	dec	eax
+	and	eax, edx         ; /* eax &= hold */
+	add	eax, r14d        ; /* eax += len */
+	mov	eax, [rbp+rax*4] ; /* eax = lcode[val+(hold&mask[op])]*/
+	jmp	L_dolen
+
+ALIGN 4
+L_test_for_second_level_dist:
+	test	al, 64
+	jnz	L_invalid_distance_code ; /* if ((op & 64) != 0) */
+
+	xor	eax, eax
+	inc	eax
+	shl	eax, cl
+	dec	eax
+	and	eax, edx         ; /* eax &= hold */
+	add	eax, r15d        ; /* eax += dist */
+	mov	eax, [r11+rax*4] ; /* eax = dcode[val+(hold&mask[op])]*/
+	jmp	L_dodist
+
+ALIGN 4
+L_clip_window:
+	mov	ecx, eax         ; /* ecx = nbytes */
+	mov	eax, [rsp+92]     ; /* eax = wsize, prepare for dist cmp */
+	neg	ecx                ; /* nbytes = -nbytes */
+
+	cmp	eax, r15d
+	jb	L_invalid_distance_too_far ; /* if (dist > wsize) */
+
+	add	ecx, r15d         ; /* nbytes = dist - nbytes */
+	cmp	dword ptr [rsp+96], 0
+	jne	L_wrap_around_window ; /* if (write != 0) */
+
+	mov	rsi, [rsp+56]     ; /* from  = window */
+	sub	eax, ecx         ; /* eax  -= nbytes */
+	add	rsi, rax         ; /* from += wsize - nbytes */
+
+	mov	eax, r14d        ; /* eax = len */
+	cmp	r14d, ecx
+	jbe	L_do_copy           ; /* if (nbytes >= len) */
+
+	sub	eax, ecx         ; /* eax -= nbytes */
+	rep     movsb
+	mov	rsi, rdi
+	sub	rsi, r15         ; /* from = &out[ -dist ] */
+	jmp	L_do_copy
+
+ALIGN 4
+L_wrap_around_window:
+	mov	eax, [rsp+96]     ; /* eax = write */
+	cmp	ecx, eax
+	jbe	L_contiguous_in_window ; /* if (write >= nbytes) */
+
+	mov	esi, [rsp+92]     ; /* from  = wsize */
+	add	rsi, [rsp+56]     ; /* from += window */
+	add	rsi, rax         ; /* from += write */
+	sub	rsi, rcx         ; /* from -= nbytes */
+	sub	ecx, eax         ; /* nbytes -= write */
+
+	mov	eax, r14d        ; /* eax = len */
+	cmp	eax, ecx
+	jbe	L_do_copy           ; /* if (nbytes >= len) */
+
+	sub	eax, ecx         ; /* len -= nbytes */
+	rep     movsb
+	mov	rsi, [rsp+56]     ; /* from = window */
+	mov	ecx, [rsp+96]     ; /* nbytes = write */
+	cmp	eax, ecx
+	jbe	L_do_copy           ; /* if (nbytes >= len) */
+
+	sub	eax, ecx         ; /* len -= nbytes */
+	rep     movsb
+	mov	rsi, rdi
+	sub	rsi, r15         ; /* from = out - dist */
+	jmp	L_do_copy
+
+ALIGN 4
+L_contiguous_in_window:
+	mov	rsi, [rsp+56]     ; /* rsi = window */
+	add	rsi, rax
+	sub	rsi, rcx         ; /* from += write - nbytes */
+
+	mov	eax, r14d        ; /* eax = len */
+	cmp	eax, ecx
+	jbe	L_do_copy           ; /* if (nbytes >= len) */
+
+	sub	eax, ecx         ; /* len -= nbytes */
+	rep     movsb
+	mov	rsi, rdi
+	sub	rsi, r15         ; /* from = out - dist */
+	jmp	L_do_copy           ; /* if (nbytes >= len) */
+
+ALIGN 4
+L_do_copy:
+	mov	ecx, eax         ; /* ecx = len */
+	rep     movsb
+
+	mov	rsi, r8          ; /* move in back to %esi, toss from */
+	jmp	L_while_test
+
+L_test_for_end_of_block:
+	test	al, 32
+	jz	L_invalid_literal_length_code
+	mov	dword ptr [rsp+116], 1
+	jmp	L_break_loop_with_status
+
+L_invalid_literal_length_code:
+	mov	dword ptr [rsp+116], 2
+	jmp	L_break_loop_with_status
+
+L_invalid_distance_code:
+	mov	dword ptr [rsp+116], 3
+	jmp	L_break_loop_with_status
+
+L_invalid_distance_too_far:
+	mov	dword ptr [rsp+116], 4
+	jmp	L_break_loop_with_status
+
+L_break_loop:
+	mov	dword ptr [rsp+116], 0
+
+L_break_loop_with_status:
+; /* put in, out, bits, and hold back into ar and pop esp */
+	mov	[rsp+16], rsi     ; /* in */
+	mov	[rsp+32], rdi     ; /* out */
+	mov	[rsp+88], ebx     ; /* bits */
+	mov	[rsp+80], rdx     ; /* hold */
+
+	mov	rax, [rsp]       ; /* restore rbp and rsp */
+	mov	rbp, [rsp+8]
+	mov	rsp, rax
+
+
+
+	mov rsi,[rsp-8]
+	mov rdi,[rsp-16]
+	mov r12,[rsp-24]
+	mov r13,[rsp-32]
+	mov r14,[rsp-40]
+	mov r15,[rsp-48]
+	mov rbx,[rsp-56]
+
+    ret 0
+;          :
+;          : "m" (ar)
+;          : "memory", "%rax", "%rbx", "%rcx", "%rdx", "%rsi", "%rdi",
+;            "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "%r14", "%r15"
+;    );
+
+inffas8664fnc 	ENDP
+;_TEXT	ENDS
+END

contrib/masmx64/readme.txt

@@ -0,0 +1,31 @@
+Summary
+-------
+This directory contains ASM implementations of the functions
+longest_match() and inflate_fast(), for 64 bits x86 (both AMD64 and Intel EM64t),
+for use with Microsoft Macro Assembler (x64) for AMD64 and Microsoft C++ 64 bits.
+
+gvmat64.asm is written by Gilles Vollant (2005), by using Brian Raiter 686/32 bits
+   assembly optimized version from Jean-loup Gailly original longest_match function
+
+inffasx64.asm and inffas8664.c were written by Chris Anderson, by optimizing
+   original function from Mark Adler
+
+Use instructions
+----------------
+Assemble the .asm files using MASM and put the object files into the zlib source
+directory.  You can also get object files here:
+
+     http://www.winimage.com/zLibDll/zlib124_masm_obj.zip
+
+define ASMV and ASMINF in your project. Include inffas8664.c in your source tree,
+and inffasx64.obj and gvmat64.obj as object to link.
+
+
+Build instructions
+------------------
+run bld_64.bat with Microsoft Macro Assembler (x64) for AMD64 (ml64.exe)
+
+ml64.exe is given with Visual Studio 2005, Windows 2003 server DDK
+
+You can get Windows 2003 server DDK with ml64 and cl for AMD64 from
+  http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price)

contrib/masmx86/bld_ml32.bat

@@ -0,0 +1,2 @@
+ml /coff /Zi /c /Flmatch686.lst match686.asm
+ml /coff /Zi /c /Flinffas32.lst inffas32.asm

contrib/masmx86/match686.asm

@@ -0,0 +1,478 @@
+; match686.asm -- Asm portion of the optimized longest_match for 32 bits x86
+; Copyright (C) 1995-1996 Jean-loup Gailly, Brian Raiter and Gilles Vollant.
+; File written by Gilles Vollant, by converting match686.S from Brian Raiter
+; for MASM. This is as assembly version of longest_match
+;  from Jean-loup Gailly in deflate.c
+;
+;         http://www.zlib.net
+;         http://www.winimage.com/zLibDll
+;         http://www.muppetlabs.com/~breadbox/software/assembly.html
+;
+; For Visual C++ 4.x and higher and ML 6.x and higher
+;   ml.exe is distributed in
+;  http://www.microsoft.com/downloads/details.aspx?FamilyID=7a1c9da0-0510-44a2-b042-7ef370530c64
+;
+; this file contain two implementation of longest_match
+;
+;  this longest_match was written by Brian raiter (1998), optimized for Pentium Pro
+;   (and the faster known version of match_init on modern Core 2 Duo and AMD Phenom)
+;
+;  for using an assembly version of longest_match, you need define ASMV in project
+;
+;    compile the asm file running
+;           ml /coff /Zi /c /Flmatch686.lst match686.asm
+;    and do not include match686.obj in your project
+;
+; note: contrib of zLib 1.2.3 and earlier contained both a deprecated version for
+;  Pentium (prior Pentium Pro) and this version for Pentium Pro and modern processor
+;  with autoselect (with cpu detection code)
+;  if you want support the old pentium optimization, you can still use these version
+;
+; this file is not optimized for old pentium, but it compatible with all x86 32 bits
+; processor (starting 80386)
+;
+;
+; see below : zlib1222add must be adjuster if you use a zlib version < 1.2.2.2
+
+;uInt longest_match(s, cur_match)
+;    deflate_state *s;
+;    IPos cur_match;                             /* current match */
+
+    NbStack         equ     76
+    cur_match       equ     dword ptr[esp+NbStack-0]
+    str_s           equ     dword ptr[esp+NbStack-4]
+; 5 dword on top (ret,ebp,esi,edi,ebx)
+    adrret          equ     dword ptr[esp+NbStack-8]
+    pushebp         equ     dword ptr[esp+NbStack-12]
+    pushedi         equ     dword ptr[esp+NbStack-16]
+    pushesi         equ     dword ptr[esp+NbStack-20]
+    pushebx         equ     dword ptr[esp+NbStack-24]
+
+    chain_length    equ     dword ptr [esp+NbStack-28]
+    limit           equ     dword ptr [esp+NbStack-32]
+    best_len        equ     dword ptr [esp+NbStack-36]
+    window          equ     dword ptr [esp+NbStack-40]
+    prev            equ     dword ptr [esp+NbStack-44]
+    scan_start      equ      word ptr [esp+NbStack-48]
+    wmask           equ     dword ptr [esp+NbStack-52]
+    match_start_ptr equ     dword ptr [esp+NbStack-56]
+    nice_match      equ     dword ptr [esp+NbStack-60]
+    scan            equ     dword ptr [esp+NbStack-64]
+
+    windowlen       equ     dword ptr [esp+NbStack-68]
+    match_start     equ     dword ptr [esp+NbStack-72]
+    strend          equ     dword ptr [esp+NbStack-76]
+    NbStackAdd      equ     (NbStack-24)
+
+    .386p
+
+    name    gvmatch
+    .MODEL  FLAT
+
+
+
+;  all the +zlib1222add offsets are due to the addition of fields
+;  in zlib in the deflate_state structure since the asm code was first written
+;  (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
+;  (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
+;  if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
+
+    zlib1222add         equ     8
+
+;  Note : these value are good with a 8 bytes boundary pack structure
+    dep_chain_length    equ     74h+zlib1222add
+    dep_window          equ     30h+zlib1222add
+    dep_strstart        equ     64h+zlib1222add
+    dep_prev_length     equ     70h+zlib1222add
+    dep_nice_match      equ     88h+zlib1222add
+    dep_w_size          equ     24h+zlib1222add
+    dep_prev            equ     38h+zlib1222add
+    dep_w_mask          equ     2ch+zlib1222add
+    dep_good_match      equ     84h+zlib1222add
+    dep_match_start     equ     68h+zlib1222add
+    dep_lookahead       equ     6ch+zlib1222add
+
+
+_TEXT                   segment
+
+IFDEF NOUNDERLINE
+            public  longest_match
+            public  match_init
+ELSE
+            public  _longest_match
+            public  _match_init
+ENDIF
+
+    MAX_MATCH           equ     258
+    MIN_MATCH           equ     3
+    MIN_LOOKAHEAD       equ     (MAX_MATCH+MIN_MATCH+1)
+
+
+
+MAX_MATCH       equ     258
+MIN_MATCH       equ     3
+MIN_LOOKAHEAD   equ     (MAX_MATCH + MIN_MATCH + 1)
+MAX_MATCH_8_     equ     ((MAX_MATCH + 7) AND 0FFF0h)
+
+
+;;; stack frame offsets
+
+chainlenwmask   equ  esp + 0    ; high word: current chain len
+                    ; low word: s->wmask
+window      equ  esp + 4    ; local copy of s->window
+windowbestlen   equ  esp + 8    ; s->window + bestlen
+scanstart   equ  esp + 16   ; first two bytes of string
+scanend     equ  esp + 12   ; last two bytes of string
+scanalign   equ  esp + 20   ; dword-misalignment of string
+nicematch   equ  esp + 24   ; a good enough match size
+bestlen     equ  esp + 28   ; size of best match so far
+scan        equ  esp + 32   ; ptr to string wanting match
+
+LocalVarsSize   equ 36
+;   saved ebx   byte esp + 36
+;   saved edi   byte esp + 40
+;   saved esi   byte esp + 44
+;   saved ebp   byte esp + 48
+;   return address  byte esp + 52
+deflatestate    equ  esp + 56   ; the function arguments
+curmatch    equ  esp + 60
+
+;;; Offsets for fields in the deflate_state structure. These numbers
+;;; are calculated from the definition of deflate_state, with the
+;;; assumption that the compiler will dword-align the fields. (Thus,
+;;; changing the definition of deflate_state could easily cause this
+;;; program to crash horribly, without so much as a warning at
+;;; compile time. Sigh.)
+
+dsWSize     equ 36+zlib1222add
+dsWMask     equ 44+zlib1222add
+dsWindow    equ 48+zlib1222add
+dsPrev      equ 56+zlib1222add
+dsMatchLen  equ 88+zlib1222add
+dsPrevMatch equ 92+zlib1222add
+dsStrStart  equ 100+zlib1222add
+dsMatchStart    equ 104+zlib1222add
+dsLookahead equ 108+zlib1222add
+dsPrevLen   equ 112+zlib1222add
+dsMaxChainLen   equ 116+zlib1222add
+dsGoodMatch equ 132+zlib1222add
+dsNiceMatch equ 136+zlib1222add
+
+
+;;; match686.asm -- Pentium-Pro-optimized version of longest_match()
+;;; Written for zlib 1.1.2
+;;; Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
+;;; You can look at http://www.muppetlabs.com/~breadbox/software/assembly.html
+;;;
+;;
+;;  This software is provided 'as-is', without any express or implied
+;;  warranty.  In no event will the authors be held liable for any damages
+;;  arising from the use of this software.
+;;
+;;  Permission is granted to anyone to use this software for any purpose,
+;;  including commercial applications, and to alter it and redistribute it
+;;  freely, subject to the following restrictions:
+;;
+;;  1. The origin of this software must not be misrepresented; you must not
+;;     claim that you wrote the original software. If you use this software
+;;     in a product, an acknowledgment in the product documentation would be
+;;     appreciated but is not required.
+;;  2. Altered source versions must be plainly marked as such, and must not be
+;;     misrepresented as being the original software
+;;  3. This notice may not be removed or altered from any source distribution.
+;;
+
+;GLOBAL _longest_match, _match_init
+
+
+;SECTION    .text
+
+;;; uInt longest_match(deflate_state *deflatestate, IPos curmatch)
+
+;_longest_match:
+    IFDEF NOUNDERLINE
+    longest_match       proc near
+    ELSE
+    _longest_match      proc near
+    ENDIF
+
+;;; Save registers that the compiler may be using, and adjust esp to
+;;; make room for our stack frame.
+
+        push    ebp
+        push    edi
+        push    esi
+        push    ebx
+        sub esp, LocalVarsSize
+
+;;; Retrieve the function arguments. ecx will hold cur_match
+;;; throughout the entire function. edx will hold the pointer to the
+;;; deflate_state structure during the function's setup (before
+;;; entering the main loop.
+
+        mov edx, [deflatestate]
+        mov ecx, [curmatch]
+
+;;; uInt wmask = s->w_mask;
+;;; unsigned chain_length = s->max_chain_length;
+;;; if (s->prev_length >= s->good_match) {
+;;;     chain_length >>= 2;
+;;; }
+
+        mov eax, [edx + dsPrevLen]
+        mov ebx, [edx + dsGoodMatch]
+        cmp eax, ebx
+        mov eax, [edx + dsWMask]
+        mov ebx, [edx + dsMaxChainLen]
+        jl  LastMatchGood
+        shr ebx, 2
+LastMatchGood:
+
+;;; chainlen is decremented once beforehand so that the function can
+;;; use the sign flag instead of the zero flag for the exit test.
+;;; It is then shifted into the high word, to make room for the wmask
+;;; value, which it will always accompany.
+
+        dec ebx
+        shl ebx, 16
+        or  ebx, eax
+        mov [chainlenwmask], ebx
+
+;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
+
+        mov eax, [edx + dsNiceMatch]
+        mov ebx, [edx + dsLookahead]
+        cmp ebx, eax
+        jl  LookaheadLess
+        mov ebx, eax
+LookaheadLess:  mov [nicematch], ebx
+
+;;; register Bytef *scan = s->window + s->strstart;
+
+        mov esi, [edx + dsWindow]
+        mov [window], esi
+        mov ebp, [edx + dsStrStart]
+        lea edi, [esi + ebp]
+        mov [scan], edi
+
+;;; Determine how many bytes the scan ptr is off from being
+;;; dword-aligned.
+
+        mov eax, edi
+        neg eax
+        and eax, 3
+        mov [scanalign], eax
+
+;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
+;;;     s->strstart - (IPos)MAX_DIST(s) : NIL;
+
+        mov eax, [edx + dsWSize]
+        sub eax, MIN_LOOKAHEAD
+        sub ebp, eax
+        jg  LimitPositive
+        xor ebp, ebp
+LimitPositive:
+
+;;; int best_len = s->prev_length;
+
+        mov eax, [edx + dsPrevLen]
+        mov [bestlen], eax
+
+;;; Store the sum of s->window + best_len in esi locally, and in esi.
+
+        add esi, eax
+        mov [windowbestlen], esi
+
+;;; register ush scan_start = *(ushf*)scan;
+;;; register ush scan_end   = *(ushf*)(scan+best_len-1);
+;;; Posf *prev = s->prev;
+
+        movzx   ebx, word ptr [edi]
+        mov [scanstart], ebx
+        movzx   ebx, word ptr [edi + eax - 1]
+        mov [scanend], ebx
+        mov edi, [edx + dsPrev]
+
+;;; Jump into the main loop.
+
+        mov edx, [chainlenwmask]
+        jmp short LoopEntry
+
+align 4
+
+;;; do {
+;;;     match = s->window + cur_match;
+;;;     if (*(ushf*)(match+best_len-1) != scan_end ||
+;;;         *(ushf*)match != scan_start) continue;
+;;;     [...]
+;;; } while ((cur_match = prev[cur_match & wmask]) > limit
+;;;          && --chain_length != 0);
+;;;
+;;; Here is the inner loop of the function. The function will spend the
+;;; majority of its time in this loop, and majority of that time will
+;;; be spent in the first ten instructions.
+;;;
+;;; Within this loop:
+;;; ebx = scanend
+;;; ecx = curmatch
+;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
+;;; esi = windowbestlen - i.e., (window + bestlen)
+;;; edi = prev
+;;; ebp = limit
+
+LookupLoop:
+        and ecx, edx
+        movzx   ecx, word ptr [edi + ecx*2]
+        cmp ecx, ebp
+        jbe LeaveNow
+        sub edx, 00010000h
+        js  LeaveNow
+LoopEntry:  movzx   eax, word ptr [esi + ecx - 1]
+        cmp eax, ebx
+        jnz LookupLoop
+        mov eax, [window]
+        movzx   eax, word ptr [eax + ecx]
+        cmp eax, [scanstart]
+        jnz LookupLoop
+
+;;; Store the current value of chainlen.
+
+        mov [chainlenwmask], edx
+
+;;; Point edi to the string under scrutiny, and esi to the string we
+;;; are hoping to match it up with. In actuality, esi and edi are
+;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is
+;;; initialized to -(MAX_MATCH_8 - scanalign).
+
+        mov esi, [window]
+        mov edi, [scan]
+        add esi, ecx
+        mov eax, [scanalign]
+        mov edx, 0fffffef8h; -(MAX_MATCH_8)
+        lea edi, [edi + eax + 0108h] ;MAX_MATCH_8]
+        lea esi, [esi + eax + 0108h] ;MAX_MATCH_8]
+
+;;; Test the strings for equality, 8 bytes at a time. At the end,
+;;; adjust edx so that it is offset to the exact byte that mismatched.
+;;;
+;;; We already know at this point that the first three bytes of the
+;;; strings match each other, and they can be safely passed over before
+;;; starting the compare loop. So what this code does is skip over 0-3
+;;; bytes, as much as necessary in order to dword-align the edi
+;;; pointer. (esi will still be misaligned three times out of four.)
+;;;
+;;; It should be confessed that this loop usually does not represent
+;;; much of the total running time. Replacing it with a more
+;;; straightforward "rep cmpsb" would not drastically degrade
+;;; performance.
+
+LoopCmps:
+        mov eax, [esi + edx]
+        xor eax, [edi + edx]
+        jnz LeaveLoopCmps
+        mov eax, [esi + edx + 4]
+        xor eax, [edi + edx + 4]
+        jnz LeaveLoopCmps4
+        add edx, 8
+        jnz LoopCmps
+        jmp short LenMaximum
+LeaveLoopCmps4: add edx, 4
+LeaveLoopCmps:  test    eax, 0000FFFFh
+        jnz LenLower
+        add edx,  2
+        shr eax, 16
+LenLower:   sub al, 1
+        adc edx, 0
+
+;;; Calculate the length of the match. If it is longer than MAX_MATCH,
+;;; then automatically accept it as the best possible match and leave.
+
+        lea eax, [edi + edx]
+        mov edi, [scan]
+        sub eax, edi
+        cmp eax, MAX_MATCH
+        jge LenMaximum
+
+;;; If the length of the match is not longer than the best match we
+;;; have so far, then forget it and return to the lookup loop.
+
+        mov edx, [deflatestate]
+        mov ebx, [bestlen]
+        cmp eax, ebx
+        jg  LongerMatch
+        mov esi, [windowbestlen]
+        mov edi, [edx + dsPrev]
+        mov ebx, [scanend]
+        mov edx, [chainlenwmask]
+        jmp LookupLoop
+
+;;;         s->match_start = cur_match;
+;;;         best_len = len;
+;;;         if (len >= nice_match) break;
+;;;         scan_end = *(ushf*)(scan+best_len-1);
+
+LongerMatch:    mov ebx, [nicematch]
+        mov [bestlen], eax
+        mov [edx + dsMatchStart], ecx
+        cmp eax, ebx
+        jge LeaveNow
+        mov esi, [window]
+        add esi, eax
+        mov [windowbestlen], esi
+        movzx   ebx, word ptr [edi + eax - 1]
+        mov edi, [edx + dsPrev]
+        mov [scanend], ebx
+        mov edx, [chainlenwmask]
+        jmp LookupLoop
+
+;;; Accept the current string, with the maximum possible length.
+
+LenMaximum: mov edx, [deflatestate]
+        mov dword ptr [bestlen], MAX_MATCH
+        mov [edx + dsMatchStart], ecx
+
+;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
+;;; return s->lookahead;
+
+LeaveNow:
+        mov edx, [deflatestate]
+        mov ebx, [bestlen]
+        mov eax, [edx + dsLookahead]
+        cmp ebx, eax
+        jg  LookaheadRet
+        mov eax, ebx
+LookaheadRet:
+
+;;; Restore the stack and return from whence we came.
+
+        add esp, LocalVarsSize
+        pop ebx
+        pop esi
+        pop edi
+        pop ebp
+
+        ret
+; please don't remove this string !
+; Your can freely use match686 in any free or commercial app if you don't remove the string in the binary!
+    db     0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998",0dh,0ah
+
+
+    IFDEF NOUNDERLINE
+    longest_match       endp
+    ELSE
+    _longest_match      endp
+    ENDIF
+
+    IFDEF NOUNDERLINE
+    match_init      proc near
+                    ret
+    match_init      endp
+    ELSE
+    _match_init     proc near
+                    ret
+    _match_init     endp
+    ENDIF
+
+
+_TEXT   ends
+end

contrib/masmx86/readme.txt

@@ -0,0 +1,27 @@
+
+Summary
+-------
+This directory contains ASM implementations of the functions
+longest_match() and inflate_fast().
+
+
+Use instructions
+----------------
+Assemble using MASM, and copy the object files into the zlib source
+directory, then run the appropriate makefile, as suggested below.  You can
+donwload MASM from here:
+
+    http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=7a1c9da0-0510-44a2-b042-7ef370530c64
+
+You can also get objects files here:
+
+    http://www.winimage.com/zLibDll/zlib124_masm_obj.zip
+
+Build instructions
+------------------
+* With Microsoft C and MASM:
+nmake -f win32/Makefile.msc LOC="-DASMV -DASMINF" OBJA="match686.obj inffas32.obj"
+
+* With Borland C and TASM:
+make -f win32/Makefile.bor LOCAL_ZLIB="-DASMV -DASMINF" OBJA="match686.obj inffas32.obj" OBJPA="+match686c.obj+match686.obj+inffas32.obj"
+

contrib/minizip/Makefile

@@ -0,0 +1,25 @@
+CC=cc
+CFLAGS=-O -I../..
+
+UNZ_OBJS = miniunz.o unzip.o ioapi.o ../../libz.a
+ZIP_OBJS = minizip.o zip.o   ioapi.o ../../libz.a
+
+.c.o:
+	$(CC) -c $(CFLAGS) $*.c
+
+all: miniunz minizip
+
+miniunz:  $(UNZ_OBJS)
+	$(CC) $(CFLAGS) -o $@ $(UNZ_OBJS)
+
+minizip:  $(ZIP_OBJS)
+	$(CC) $(CFLAGS) -o $@ $(ZIP_OBJS)
+
+test:	miniunz minizip
+	./minizip test readme.txt
+	./miniunz -l test.zip
+	mv readme.txt readme.old
+	./miniunz test.zip
+
+clean:
+	/bin/rm -f *.o *~ minizip miniunz

contrib/minizip/MiniZip64_Changes.txt

@@ -0,0 +1,6 @@
+
+MiniZip 1.1 was derrived from MiniZip at version 1.01f
+
+Change in 1.0 (Okt 2009)
+ - **TODO - Add history**
+

contrib/minizip/MiniZip64_info.txt

@@ -0,0 +1,74 @@
+MiniZip - Copyright (c) 1998-2010 - by Gilles Vollant - version 1.1 64 bits from Mathias Svensson
+
+Introduction
+---------------------
+MiniZip 1.1 is built from MiniZip 1.0 by Gilles Vollant ( http://www.winimage.com/zLibDll/minizip.html )
+
+When adding ZIP64 support into minizip it would result into risk of breaking compatibility with minizip 1.0.
+All possible work was done for compatibility.
+
+
+Background
+---------------------
+When adding ZIP64 support Mathias Svensson found that Even Rouault have added ZIP64 
+support for unzip.c into minizip for a open source project called gdal ( http://www.gdal.org/ )
+
+That was used as a starting point. And after that ZIP64 support was added to zip.c
+some refactoring and code cleanup was also done.
+
+
+Changed from MiniZip 1.0 to MiniZip 1.1
+---------------------------------------
+* Added ZIP64 support for unzip ( by Even Rouault )
+* Added ZIP64 support for zip ( by Mathias Svensson )
+* Reverted some changed that Even Rouault did.
+* Bunch of patches received from Gulles Vollant that he received for MiniZip from various users.
+* Added unzip patch for BZIP Compression method (patch create by Daniel Borca)
+* Added BZIP Compress method for zip
+* Did some refactoring and code cleanup
+
+
+Credits
+
+ Gilles Vollant    - Original MiniZip author
+ Even Rouault      - ZIP64 unzip Support
+ Daniel Borca      - BZip Compression method support in unzip
+ Mathias Svensson  - ZIP64 zip support
+ Mathias Svensson  - BZip Compression method support in zip
+
+ Resources
+
+ ZipLayout   http://result42.com/projects/ZipFileLayout
+             Command line tool for Windows that shows the layout and information of the headers in a zip archive.
+             Used when debugging and validating the creation of zip files using MiniZip64
+
+
+ ZIP App Note  http://www.pkware.com/documents/casestudies/APPNOTE.TXT
+               Zip File specification
+
+
+Notes.
+ * To be able to use BZip compression method in zip64.c or unzip64.c the BZIP2 lib is needed and HAVE_BZIP2 need to be defined.
+
+License
+----------------------------------------------------------
+   Condition of use and distribution are the same than zlib :
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+----------------------------------------------------------
+

contrib/minizip/crypt.h

@@ -0,0 +1,131 @@
+/* crypt.h -- base code for crypt/uncrypt ZIPfile
+
+
+   Version 1.01e, February 12th, 2005
+
+   Copyright (C) 1998-2005 Gilles Vollant
+
+   This code is a modified version of crypting code in Infozip distribution
+
+   The encryption/decryption parts of this source code (as opposed to the
+   non-echoing password parts) were originally written in Europe.  The
+   whole source package can be freely distributed, including from the USA.
+   (Prior to January 2000, re-export from the US was a violation of US law.)
+
+   This encryption code is a direct transcription of the algorithm from
+   Roger Schlafly, described by Phil Katz in the file appnote.txt.  This
+   file (appnote.txt) is distributed with the PKZIP program (even in the
+   version without encryption capabilities).
+
+   If you don't need crypting in your application, just define symbols
+   NOCRYPT and NOUNCRYPT.
+
+   This code support the "Traditional PKWARE Encryption".
+
+   The new AES encryption added on Zip format by Winzip (see the page
+   http://www.winzip.com/aes_info.htm ) and PKWare PKZip 5.x Strong
+   Encryption is not supported.
+*/
+
+#define CRC32(c, b) ((*(pcrc_32_tab+(((int)(c) ^ (b)) & 0xff))) ^ ((c) >> 8))
+
+/***********************************************************************
+ * Return the next byte in the pseudo-random sequence
+ */
+static int decrypt_byte(unsigned long* pkeys, const unsigned long* pcrc_32_tab)
+{
+    unsigned temp;  /* POTENTIAL BUG:  temp*(temp^1) may overflow in an
+                     * unpredictable manner on 16-bit systems; not a problem
+                     * with any known compiler so far, though */
+
+    temp = ((unsigned)(*(pkeys+2)) & 0xffff) | 2;
+    return (int)(((temp * (temp ^ 1)) >> 8) & 0xff);
+}
+
+/***********************************************************************
+ * Update the encryption keys with the next byte of plain text
+ */
+static int update_keys(unsigned long* pkeys,const unsigned long* pcrc_32_tab,int c)
+{
+    (*(pkeys+0)) = CRC32((*(pkeys+0)), c);
+    (*(pkeys+1)) += (*(pkeys+0)) & 0xff;
+    (*(pkeys+1)) = (*(pkeys+1)) * 134775813L + 1;
+    {
+      register int keyshift = (int)((*(pkeys+1)) >> 24);
+      (*(pkeys+2)) = CRC32((*(pkeys+2)), keyshift);
+    }
+    return c;
+}
+
+
+/***********************************************************************
+ * Initialize the encryption keys and the random header according to
+ * the given password.
+ */
+static void init_keys(const char* passwd,unsigned long* pkeys,const unsigned long* pcrc_32_tab)
+{
+    *(pkeys+0) = 305419896L;
+    *(pkeys+1) = 591751049L;
+    *(pkeys+2) = 878082192L;
+    while (*passwd != '\0') {
+        update_keys(pkeys,pcrc_32_tab,(int)*passwd);
+        passwd++;
+    }
+}
+
+#define zdecode(pkeys,pcrc_32_tab,c) \
+    (update_keys(pkeys,pcrc_32_tab,c ^= decrypt_byte(pkeys,pcrc_32_tab)))
+
+#define zencode(pkeys,pcrc_32_tab,c,t) \
+    (t=decrypt_byte(pkeys,pcrc_32_tab), update_keys(pkeys,pcrc_32_tab,c), t^(c))
+
+#ifdef INCLUDECRYPTINGCODE_IFCRYPTALLOWED
+
+#define RAND_HEAD_LEN  12
+   /* "last resort" source for second part of crypt seed pattern */
+#  ifndef ZCR_SEED2
+#    define ZCR_SEED2 3141592654UL     /* use PI as default pattern */
+#  endif
+
+static int crypthead(const char* passwd,      /* password string */
+                     unsigned char* buf,      /* where to write header */
+                     int bufSize,
+                     unsigned long* pkeys,
+                     const unsigned long* pcrc_32_tab,
+                     unsigned long crcForCrypting)
+{
+    int n;                       /* index in random header */
+    int t;                       /* temporary */
+    int c;                       /* random byte */
+    unsigned char header[RAND_HEAD_LEN-2]; /* random header */
+    static unsigned calls = 0;   /* ensure different random header each time */
+
+    if (bufSize<RAND_HEAD_LEN)
+      return 0;
+
+    /* First generate RAND_HEAD_LEN-2 random bytes. We encrypt the
+     * output of rand() to get less predictability, since rand() is
+     * often poorly implemented.
+     */
+    if (++calls == 1)
+    {
+        srand((unsigned)(time(NULL) ^ ZCR_SEED2));
+    }
+    init_keys(passwd, pkeys, pcrc_32_tab);
+    for (n = 0; n < RAND_HEAD_LEN-2; n++)
+    {
+        c = (rand() >> 7) & 0xff;
+        header[n] = (unsigned char)zencode(pkeys, pcrc_32_tab, c, t);
+    }
+    /* Encrypt random header (last two bytes is high word of crc) */
+    init_keys(passwd, pkeys, pcrc_32_tab);
+    for (n = 0; n < RAND_HEAD_LEN-2; n++)
+    {
+        buf[n] = (unsigned char)zencode(pkeys, pcrc_32_tab, header[n], t);
+    }
+    buf[n++] = (unsigned char)zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 16) & 0xff, t);
+    buf[n++] = (unsigned char)zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 24) & 0xff, t);
+    return n;
+}
+
+#endif

contrib/minizip/ioapi.c

@@ -0,0 +1,235 @@
+/* ioapi.h -- IO base function header for compress/uncompress .zip
+   part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
+
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+         Modifications for Zip64 support
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+
+         For more info read MiniZip_info.txt
+
+*/
+
+#if (defined(_WIN32))
+        #define _CRT_SECURE_NO_WARNINGS
+#endif
+
+#include "ioapi.h"
+
+voidpf call_zopen64 (const zlib_filefunc64_32_def* pfilefunc,const void*filename,int mode)
+{
+    if (pfilefunc->zfile_func64.zopen64_file != NULL)
+        return (*(pfilefunc->zfile_func64.zopen64_file)) (pfilefunc->zfile_func64.opaque,filename,mode);
+    else
+    {
+        return (*(pfilefunc->zopen32_file))(pfilefunc->zfile_func64.opaque,(const char*)filename,mode);
+    }
+}
+
+long call_zseek64 (const zlib_filefunc64_32_def* pfilefunc,voidpf filestream, ZPOS64_T offset, int origin)
+{
+    if (pfilefunc->zfile_func64.zseek64_file != NULL)
+        return (*(pfilefunc->zfile_func64.zseek64_file)) (pfilefunc->zfile_func64.opaque,filestream,offset,origin);
+    else
+    {
+        uLong offsetTruncated = (uLong)offset;
+        if (offsetTruncated != offset)
+            return -1;
+        else
+            return (*(pfilefunc->zseek32_file))(pfilefunc->zfile_func64.opaque,filestream,offsetTruncated,origin);
+    }
+}
+
+ZPOS64_T call_ztell64 (const zlib_filefunc64_32_def* pfilefunc,voidpf filestream)
+{
+    if (pfilefunc->zfile_func64.zseek64_file != NULL)
+        return (*(pfilefunc->zfile_func64.ztell64_file)) (pfilefunc->zfile_func64.opaque,filestream);
+    else
+    {
+        uLong tell_uLong = (*(pfilefunc->ztell32_file))(pfilefunc->zfile_func64.opaque,filestream);
+        if ((tell_uLong) == ((uLong)-1))
+            return (ZPOS64_T)-1;
+        else
+            return tell_uLong;
+    }
+}
+
+void fill_zlib_filefunc64_32_def_from_filefunc32(zlib_filefunc64_32_def* p_filefunc64_32,const zlib_filefunc_def* p_filefunc32)
+{
+    p_filefunc64_32->zfile_func64.zopen64_file = NULL;
+    p_filefunc64_32->zopen32_file = p_filefunc32->zopen_file;
+    p_filefunc64_32->zfile_func64.zerror_file = p_filefunc32->zerror_file;
+    p_filefunc64_32->zfile_func64.zread_file = p_filefunc32->zread_file;
+    p_filefunc64_32->zfile_func64.zwrite_file = p_filefunc32->zwrite_file;
+    p_filefunc64_32->zfile_func64.ztell64_file = NULL;
+    p_filefunc64_32->zfile_func64.zseek64_file = NULL;
+    p_filefunc64_32->zfile_func64.zclose_file = p_filefunc32->zclose_file;
+    p_filefunc64_32->zfile_func64.zerror_file = p_filefunc32->zerror_file;
+    p_filefunc64_32->zfile_func64.opaque = p_filefunc32->opaque;
+    p_filefunc64_32->zseek32_file = p_filefunc32->zseek_file;
+    p_filefunc64_32->ztell32_file = p_filefunc32->ztell_file;
+}
+
+
+
+static voidpf  ZCALLBACK fopen_file_func OF((voidpf opaque, const char* filename, int mode));
+static uLong   ZCALLBACK fread_file_func OF((voidpf opaque, voidpf stream, void* buf, uLong size));
+static uLong   ZCALLBACK fwrite_file_func OF((voidpf opaque, voidpf stream, const void* buf,uLong size));
+static ZPOS64_T ZCALLBACK ftell64_file_func OF((voidpf opaque, voidpf stream));
+static long    ZCALLBACK fseek64_file_func OF((voidpf opaque, voidpf stream, ZPOS64_T offset, int origin));
+static int     ZCALLBACK fclose_file_func OF((voidpf opaque, voidpf stream));
+static int     ZCALLBACK ferror_file_func OF((voidpf opaque, voidpf stream));
+
+static voidpf ZCALLBACK fopen_file_func (voidpf opaque, const char* filename, int mode)
+{
+    FILE* file = NULL;
+    const char* mode_fopen = NULL;
+    if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ)
+        mode_fopen = "rb";
+    else
+    if (mode & ZLIB_FILEFUNC_MODE_EXISTING)
+        mode_fopen = "r+b";
+    else
+    if (mode & ZLIB_FILEFUNC_MODE_CREATE)
+        mode_fopen = "wb";
+
+    if ((filename!=NULL) && (mode_fopen != NULL))
+        file = fopen(filename, mode_fopen);
+    return file;
+}
+
+static voidpf ZCALLBACK fopen64_file_func (voidpf opaque, const void* filename, int mode)
+{
+    FILE* file = NULL;
+    const char* mode_fopen = NULL;
+    if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ)
+        mode_fopen = "rb";
+    else
+    if (mode & ZLIB_FILEFUNC_MODE_EXISTING)
+        mode_fopen = "r+b";
+    else
+    if (mode & ZLIB_FILEFUNC_MODE_CREATE)
+        mode_fopen = "wb";
+
+    if ((filename!=NULL) && (mode_fopen != NULL))
+        file = fopen64((const char*)filename, mode_fopen);
+    return file;
+}
+
+
+static uLong ZCALLBACK fread_file_func (voidpf opaque, voidpf stream, void* buf, uLong size)
+{
+    uLong ret;
+    ret = (uLong)fread(buf, 1, (size_t)size, (FILE *)stream);
+    return ret;
+}
+
+static uLong ZCALLBACK fwrite_file_func (voidpf opaque, voidpf stream, const void* buf, uLong size)
+{
+    uLong ret;
+    ret = (uLong)fwrite(buf, 1, (size_t)size, (FILE *)stream);
+    return ret;
+}
+
+static long ZCALLBACK ftell_file_func (voidpf opaque, voidpf stream)
+{
+    long ret;
+    ret = ftell((FILE *)stream);
+    return ret;
+}
+
+
+static ZPOS64_T ZCALLBACK ftell64_file_func (voidpf opaque, voidpf stream)
+{
+    ZPOS64_T ret;
+    ret = ftello64((FILE *)stream);
+    return ret;
+}
+
+static long ZCALLBACK fseek_file_func (voidpf  opaque, voidpf stream, uLong offset, int origin)
+{
+    int fseek_origin=0;
+    long ret;
+    switch (origin)
+    {
+    case ZLIB_FILEFUNC_SEEK_CUR :
+        fseek_origin = SEEK_CUR;
+        break;
+    case ZLIB_FILEFUNC_SEEK_END :
+        fseek_origin = SEEK_END;
+        break;
+    case ZLIB_FILEFUNC_SEEK_SET :
+        fseek_origin = SEEK_SET;
+        break;
+    default: return -1;
+    }
+    ret = 0;
+    if (fseek((FILE *)stream, offset, fseek_origin) != 0)
+        ret = -1;
+    return ret;
+}
+
+static long ZCALLBACK fseek64_file_func (voidpf  opaque, voidpf stream, ZPOS64_T offset, int origin)
+{
+    int fseek_origin=0;
+    long ret;
+    switch (origin)
+    {
+    case ZLIB_FILEFUNC_SEEK_CUR :
+        fseek_origin = SEEK_CUR;
+        break;
+    case ZLIB_FILEFUNC_SEEK_END :
+        fseek_origin = SEEK_END;
+        break;
+    case ZLIB_FILEFUNC_SEEK_SET :
+        fseek_origin = SEEK_SET;
+        break;
+    default: return -1;
+    }
+    ret = 0;
+
+    if(fseeko64((FILE *)stream, offset, fseek_origin) != 0)
+                        ret = -1;
+
+    return ret;
+}
+
+
+static int ZCALLBACK fclose_file_func (voidpf opaque, voidpf stream)
+{
+    int ret;
+    ret = fclose((FILE *)stream);
+    return ret;
+}
+
+static int ZCALLBACK ferror_file_func (voidpf opaque, voidpf stream)
+{
+    int ret;
+    ret = ferror((FILE *)stream);
+    return ret;
+}
+
+void fill_fopen_filefunc (pzlib_filefunc_def)
+  zlib_filefunc_def* pzlib_filefunc_def;
+{
+    pzlib_filefunc_def->zopen_file = fopen_file_func;
+    pzlib_filefunc_def->zread_file = fread_file_func;
+    pzlib_filefunc_def->zwrite_file = fwrite_file_func;
+    pzlib_filefunc_def->ztell_file = ftell_file_func;
+    pzlib_filefunc_def->zseek_file = fseek_file_func;
+    pzlib_filefunc_def->zclose_file = fclose_file_func;
+    pzlib_filefunc_def->zerror_file = ferror_file_func;
+    pzlib_filefunc_def->opaque = NULL;
+}
+
+void fill_fopen64_filefunc (zlib_filefunc64_def*  pzlib_filefunc_def)
+{
+    pzlib_filefunc_def->zopen64_file = fopen64_file_func;
+    pzlib_filefunc_def->zread_file = fread_file_func;
+    pzlib_filefunc_def->zwrite_file = fwrite_file_func;
+    pzlib_filefunc_def->ztell64_file = ftell64_file_func;
+    pzlib_filefunc_def->zseek64_file = fseek64_file_func;
+    pzlib_filefunc_def->zclose_file = fclose_file_func;
+    pzlib_filefunc_def->zerror_file = ferror_file_func;
+    pzlib_filefunc_def->opaque = NULL;
+}

contrib/minizip/ioapi.h

@@ -0,0 +1,200 @@
+/* ioapi.h -- IO base function header for compress/uncompress .zip
+   part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
+
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+         Modifications for Zip64 support
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+
+         For more info read MiniZip_info.txt
+
+         Changes
+
+    Oct-2009 - Defined ZPOS64_T to fpos_t on windows and u_int64_t on linux. (might need to find a better why for this)
+    Oct-2009 - Change to fseeko64, ftello64 and fopen64 so large files would work on linux.
+               More if/def section may be needed to support other platforms
+    Oct-2009 - Defined fxxxx64 calls to normal fopen/ftell/fseek so they would compile on windows.
+                          (but you should use iowin32.c for windows instead)
+
+*/
+
+#ifndef _ZLIBIOAPI64_H
+#define _ZLIBIOAPI64_H
+
+#if (!defined(_WIN32)) && (!defined(WIN32))
+
+  // Linux needs this to support file operation on files larger then 4+GB
+  // But might need better if/def to select just the platforms that needs them.
+
+        #ifndef __USE_FILE_OFFSET64
+                #define __USE_FILE_OFFSET64
+        #endif
+        #ifndef __USE_LARGEFILE64
+                #define __USE_LARGEFILE64
+        #endif
+        #ifndef _LARGEFILE64_SOURCE
+                #define _LARGEFILE64_SOURCE
+        #endif
+        #ifndef _FILE_OFFSET_BIT
+                #define _FILE_OFFSET_BIT 64
+        #endif
+#endif
+
+#include <stdio.h>
+#include <stdlib.h>
+#include "zlib.h"
+
+#if defined(USE_FILE32API)
+#define fopen64 fopen
+#define ftello64 ftell
+#define fseeko64 fseek
+#else
+#ifdef _MSC_VER
+ #define fopen64 fopen
+ #if (_MSC_VER >= 1400) && (!(defined(NO_MSCVER_FILE64_FUNC)))
+  #define ftello64 _ftelli64
+  #define fseeko64 _fseeki64
+ #else // old MSC
+  #define ftello64 ftell
+  #define fseeko64 fseek
+ #endif
+#endif
+#endif
+
+/*
+#ifndef ZPOS64_T
+  #ifdef _WIN32
+                #define ZPOS64_T fpos_t
+  #else
+    #include <stdint.h>
+    #define ZPOS64_T uint64_t
+  #endif
+#endif
+*/
+
+#ifdef HAVE_MINIZIP64_CONF_H
+#include "mz64conf.h"
+#endif
+
+/* a type choosen by DEFINE */
+#ifdef HAVE_64BIT_INT_CUSTOM
+typedef  64BIT_INT_CUSTOM_TYPE ZPOS64_T;
+#else
+#ifdef HAS_STDINT_H
+#include "stdint.h"
+typedef uint64_t ZPOS64_T;
+#else
+
+
+#if defined(_MSC_VER) || defined(__BORLANDC__)
+typedef unsigned __int64 ZPOS64_T;
+#else
+typedef unsigned long long int ZPOS64_T;
+#endif
+#endif
+#endif
+
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+#define ZLIB_FILEFUNC_SEEK_CUR (1)
+#define ZLIB_FILEFUNC_SEEK_END (2)
+#define ZLIB_FILEFUNC_SEEK_SET (0)
+
+#define ZLIB_FILEFUNC_MODE_READ      (1)
+#define ZLIB_FILEFUNC_MODE_WRITE     (2)
+#define ZLIB_FILEFUNC_MODE_READWRITEFILTER (3)
+
+#define ZLIB_FILEFUNC_MODE_EXISTING (4)
+#define ZLIB_FILEFUNC_MODE_CREATE   (8)
+
+
+#ifndef ZCALLBACK
+ #if (defined(WIN32) || defined(_WIN32) || defined (WINDOWS) || defined (_WINDOWS)) && defined(CALLBACK) && defined (USEWINDOWS_CALLBACK)
+   #define ZCALLBACK CALLBACK
+ #else
+   #define ZCALLBACK
+ #endif
+#endif
+
+
+
+
+typedef voidpf   (ZCALLBACK *open_file_func)      OF((voidpf opaque, const char* filename, int mode));
+typedef uLong    (ZCALLBACK *read_file_func)      OF((voidpf opaque, voidpf stream, void* buf, uLong size));
+typedef uLong    (ZCALLBACK *write_file_func)     OF((voidpf opaque, voidpf stream, const void* buf, uLong size));
+typedef int      (ZCALLBACK *close_file_func)     OF((voidpf opaque, voidpf stream));
+typedef int      (ZCALLBACK *testerror_file_func) OF((voidpf opaque, voidpf stream));
+
+typedef long     (ZCALLBACK *tell_file_func)      OF((voidpf opaque, voidpf stream));
+typedef long     (ZCALLBACK *seek_file_func)      OF((voidpf opaque, voidpf stream, uLong offset, int origin));
+
+
+/* here is the "old" 32 bits structure structure */
+typedef struct zlib_filefunc_def_s
+{
+    open_file_func      zopen_file;
+    read_file_func      zread_file;
+    write_file_func     zwrite_file;
+    tell_file_func      ztell_file;
+    seek_file_func      zseek_file;
+    close_file_func     zclose_file;
+    testerror_file_func zerror_file;
+    voidpf              opaque;
+} zlib_filefunc_def;
+
+typedef ZPOS64_T (ZCALLBACK *tell64_file_func)    OF((voidpf opaque, voidpf stream));
+typedef long     (ZCALLBACK *seek64_file_func)    OF((voidpf opaque, voidpf stream, ZPOS64_T offset, int origin));
+typedef voidpf   (ZCALLBACK *open64_file_func)    OF((voidpf opaque, const void* filename, int mode));
+
+typedef struct zlib_filefunc64_def_s
+{
+    open64_file_func    zopen64_file;
+    read_file_func      zread_file;
+    write_file_func     zwrite_file;
+    tell64_file_func    ztell64_file;
+    seek64_file_func    zseek64_file;
+    close_file_func     zclose_file;
+    testerror_file_func zerror_file;
+    voidpf              opaque;
+} zlib_filefunc64_def;
+
+void fill_fopen64_filefunc OF((zlib_filefunc64_def* pzlib_filefunc_def));
+void fill_fopen_filefunc OF((zlib_filefunc_def* pzlib_filefunc_def));
+
+/* now internal definition, only for zip.c and unzip.h */
+typedef struct zlib_filefunc64_32_def_s
+{
+    zlib_filefunc64_def zfile_func64;
+    open_file_func      zopen32_file;
+    tell_file_func      ztell32_file;
+    seek_file_func      zseek32_file;
+} zlib_filefunc64_32_def;
+
+
+#define ZREAD64(filefunc,filestream,buf,size)     ((*((filefunc).zfile_func64.zread_file))   ((filefunc).zfile_func64.opaque,filestream,buf,size))
+#define ZWRITE64(filefunc,filestream,buf,size)    ((*((filefunc).zfile_func64.zwrite_file))  ((filefunc).zfile_func64.opaque,filestream,buf,size))
+//#define ZTELL64(filefunc,filestream)            ((*((filefunc).ztell64_file)) ((filefunc).opaque,filestream))
+//#define ZSEEK64(filefunc,filestream,pos,mode)   ((*((filefunc).zseek64_file)) ((filefunc).opaque,filestream,pos,mode))
+#define ZCLOSE64(filefunc,filestream)             ((*((filefunc).zfile_func64.zclose_file))  ((filefunc).zfile_func64.opaque,filestream))
+#define ZERROR64(filefunc,filestream)             ((*((filefunc).zfile_func64.zerror_file))  ((filefunc).zfile_func64.opaque,filestream))
+
+voidpf call_zopen64 OF((const zlib_filefunc64_32_def* pfilefunc,const void*filename,int mode));
+long    call_zseek64 OF((const zlib_filefunc64_32_def* pfilefunc,voidpf filestream, ZPOS64_T offset, int origin));
+ZPOS64_T call_ztell64 OF((const zlib_filefunc64_32_def* pfilefunc,voidpf filestream));
+
+void    fill_zlib_filefunc64_32_def_from_filefunc32(zlib_filefunc64_32_def* p_filefunc64_32,const zlib_filefunc_def* p_filefunc32);
+
+#define ZOPEN64(filefunc,filename,mode)         (call_zopen64((&(filefunc)),(filename),(mode)))
+#define ZTELL64(filefunc,filestream)            (call_ztell64((&(filefunc)),(filestream)))
+#define ZSEEK64(filefunc,filestream,pos,mode)   (call_zseek64((&(filefunc)),(filestream),(pos),(mode)))
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

contrib/minizip/iowin32.c

@@ -0,0 +1,389 @@
+/* iowin32.c -- IO base function header for compress/uncompress .zip
+     Version 1.1, February 14h, 2010
+     part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
+
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+         Modifications for Zip64 support
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+
+     For more info read MiniZip_info.txt
+
+*/
+
+#include <stdlib.h>
+
+#include "zlib.h"
+#include "ioapi.h"
+#include "iowin32.h"
+
+#ifndef INVALID_HANDLE_VALUE
+#define INVALID_HANDLE_VALUE (0xFFFFFFFF)
+#endif
+
+#ifndef INVALID_SET_FILE_POINTER
+#define INVALID_SET_FILE_POINTER ((DWORD)-1)
+#endif
+
+voidpf  ZCALLBACK win32_open_file_func  OF((voidpf opaque, const char* filename, int mode));
+uLong   ZCALLBACK win32_read_file_func  OF((voidpf opaque, voidpf stream, void* buf, uLong size));
+uLong   ZCALLBACK win32_write_file_func OF((voidpf opaque, voidpf stream, const void* buf, uLong size));
+ZPOS64_T ZCALLBACK win32_tell64_file_func  OF((voidpf opaque, voidpf stream));
+long    ZCALLBACK win32_seek64_file_func  OF((voidpf opaque, voidpf stream, ZPOS64_T offset, int origin));
+int     ZCALLBACK win32_close_file_func OF((voidpf opaque, voidpf stream));
+int     ZCALLBACK win32_error_file_func OF((voidpf opaque, voidpf stream));
+
+typedef struct
+{
+    HANDLE hf;
+    int error;
+} WIN32FILE_IOWIN;
+
+
+static void win32_translate_open_mode(int mode,
+                                      DWORD* lpdwDesiredAccess,
+                                      DWORD* lpdwCreationDisposition,
+                                      DWORD* lpdwShareMode,
+                                      DWORD* lpdwFlagsAndAttributes)
+{
+    *lpdwDesiredAccess = *lpdwShareMode = *lpdwFlagsAndAttributes = *lpdwCreationDisposition = 0;
+
+    if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ)
+    {
+        *lpdwDesiredAccess = GENERIC_READ;
+        *lpdwCreationDisposition = OPEN_EXISTING;
+        *lpdwShareMode = FILE_SHARE_READ;
+    }
+    else if (mode & ZLIB_FILEFUNC_MODE_EXISTING)
+    {
+        *lpdwDesiredAccess = GENERIC_WRITE | GENERIC_READ;
+        *lpdwCreationDisposition = OPEN_EXISTING;
+    }
+    else if (mode & ZLIB_FILEFUNC_MODE_CREATE)
+    {
+        *lpdwDesiredAccess = GENERIC_WRITE | GENERIC_READ;
+        *lpdwCreationDisposition = CREATE_ALWAYS;
+    }
+}
+
+static voidpf win32_build_iowin(HANDLE hFile)
+{
+    voidpf ret=NULL;
+
+    if ((hFile != NULL) && (hFile != INVALID_HANDLE_VALUE))
+    {
+        WIN32FILE_IOWIN w32fiow;
+        w32fiow.hf = hFile;
+        w32fiow.error = 0;
+        ret = malloc(sizeof(WIN32FILE_IOWIN));
+
+        if (ret==NULL)
+            CloseHandle(hFile);
+        else
+            *((WIN32FILE_IOWIN*)ret) = w32fiow;
+    }
+    return ret;
+}
+
+voidpf ZCALLBACK win32_open64_file_func (voidpf opaque,const void* filename,int mode)
+{
+    const char* mode_fopen = NULL;
+    DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ;
+    HANDLE hFile = NULL;
+
+    win32_translate_open_mode(mode,&dwDesiredAccess,&dwCreationDisposition,&dwShareMode,&dwFlagsAndAttributes);
+
+    if ((filename!=NULL) && (dwDesiredAccess != 0))
+        hFile = CreateFile((LPCTSTR)filename, dwDesiredAccess, dwShareMode, NULL, dwCreationDisposition, dwFlagsAndAttributes, NULL);
+
+    return win32_build_iowin(hFile);
+}
+
+
+voidpf ZCALLBACK win32_open64_file_funcA (voidpf opaque,const void* filename,int mode)
+{
+    const char* mode_fopen = NULL;
+    DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ;
+    HANDLE hFile = NULL;
+
+    win32_translate_open_mode(mode,&dwDesiredAccess,&dwCreationDisposition,&dwShareMode,&dwFlagsAndAttributes);
+
+    if ((filename!=NULL) && (dwDesiredAccess != 0))
+        hFile = CreateFileA((LPCSTR)filename, dwDesiredAccess, dwShareMode, NULL, dwCreationDisposition, dwFlagsAndAttributes, NULL);
+
+    return win32_build_iowin(hFile);
+}
+
+
+voidpf ZCALLBACK win32_open64_file_funcW (voidpf opaque,const void* filename,int mode)
+{
+    const char* mode_fopen = NULL;
+    DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ;
+    HANDLE hFile = NULL;
+
+    win32_translate_open_mode(mode,&dwDesiredAccess,&dwCreationDisposition,&dwShareMode,&dwFlagsAndAttributes);
+
+    if ((filename!=NULL) && (dwDesiredAccess != 0))
+        hFile = CreateFileW((LPCWSTR)filename, dwDesiredAccess, dwShareMode, NULL, dwCreationDisposition, dwFlagsAndAttributes, NULL);
+
+    return win32_build_iowin(hFile);
+}
+
+
+voidpf ZCALLBACK win32_open_file_func (voidpf opaque,const char* filename,int mode)
+{
+    const char* mode_fopen = NULL;
+    DWORD dwDesiredAccess,dwCreationDisposition,dwShareMode,dwFlagsAndAttributes ;
+    HANDLE hFile = NULL;
+
+    win32_translate_open_mode(mode,&dwDesiredAccess,&dwCreationDisposition,&dwShareMode,&dwFlagsAndAttributes);
+
+    if ((filename!=NULL) && (dwDesiredAccess != 0))
+        hFile = CreateFile((LPCTSTR)filename, dwDesiredAccess, dwShareMode, NULL, dwCreationDisposition, dwFlagsAndAttributes, NULL);
+
+    return win32_build_iowin(hFile);
+}
+
+
+uLong ZCALLBACK win32_read_file_func (voidpf opaque, voidpf stream, void* buf,uLong size)
+{
+    uLong ret=0;
+    HANDLE hFile = NULL;
+    if (stream!=NULL)
+        hFile = ((WIN32FILE_IOWIN*)stream) -> hf;
+
+    if (hFile != NULL)
+    {
+        if (!ReadFile(hFile, buf, size, &ret, NULL))
+        {
+            DWORD dwErr = GetLastError();
+            if (dwErr == ERROR_HANDLE_EOF)
+                dwErr = 0;
+            ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr;
+        }
+    }
+
+    return ret;
+}
+
+
+uLong ZCALLBACK win32_write_file_func (voidpf opaque,voidpf stream,const void* buf,uLong size)
+{
+    uLong ret=0;
+    HANDLE hFile = NULL;
+    if (stream!=NULL)
+        hFile = ((WIN32FILE_IOWIN*)stream) -> hf;
+
+    if (hFile != NULL)
+    {
+        if (!WriteFile(hFile, buf, size, &ret, NULL))
+        {
+            DWORD dwErr = GetLastError();
+            if (dwErr == ERROR_HANDLE_EOF)
+                dwErr = 0;
+            ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr;
+        }
+    }
+
+    return ret;
+}
+
+long ZCALLBACK win32_tell_file_func (voidpf opaque,voidpf stream)
+{
+    long ret=-1;
+    HANDLE hFile = NULL;
+    if (stream!=NULL)
+        hFile = ((WIN32FILE_IOWIN*)stream) -> hf;
+    if (hFile != NULL)
+    {
+        DWORD dwSet = SetFilePointer(hFile, 0, NULL, FILE_CURRENT);
+        if (dwSet == INVALID_SET_FILE_POINTER)
+        {
+            DWORD dwErr = GetLastError();
+            ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr;
+            ret = -1;
+        }
+        else
+            ret=(long)dwSet;
+    }
+    return ret;
+}
+
+ZPOS64_T ZCALLBACK win32_tell64_file_func (voidpf opaque, voidpf stream)
+{
+    ZPOS64_T ret= (ZPOS64_T)-1;
+    HANDLE hFile = NULL;
+    if (stream!=NULL)
+        hFile = ((WIN32FILE_IOWIN*)stream)->hf;
+
+    if (hFile)
+    {
+        LARGE_INTEGER li;
+        li.QuadPart = 0;
+        li.u.LowPart = SetFilePointer(hFile, li.u.LowPart, &li.u.HighPart, FILE_CURRENT);
+        if ( (li.LowPart == 0xFFFFFFFF) && (GetLastError() != NO_ERROR))
+        {
+            DWORD dwErr = GetLastError();
+            ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr;
+            ret = (ZPOS64_T)-1;
+        }
+        else
+            ret=li.QuadPart;
+    }
+    return ret;
+}
+
+
+long ZCALLBACK win32_seek_file_func (voidpf opaque,voidpf stream,uLong offset,int origin)
+{
+    DWORD dwMoveMethod=0xFFFFFFFF;
+    HANDLE hFile = NULL;
+
+    long ret=-1;
+    if (stream!=NULL)
+        hFile = ((WIN32FILE_IOWIN*)stream) -> hf;
+    switch (origin)
+    {
+    case ZLIB_FILEFUNC_SEEK_CUR :
+        dwMoveMethod = FILE_CURRENT;
+        break;
+    case ZLIB_FILEFUNC_SEEK_END :
+        dwMoveMethod = FILE_END;
+        break;
+    case ZLIB_FILEFUNC_SEEK_SET :
+        dwMoveMethod = FILE_BEGIN;
+        break;
+    default: return -1;
+    }
+
+    if (hFile != NULL)
+    {
+        DWORD dwSet = SetFilePointer(hFile, offset, NULL, dwMoveMethod);
+        if (dwSet == INVALID_SET_FILE_POINTER)
+        {
+            DWORD dwErr = GetLastError();
+            ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr;
+            ret = -1;
+        }
+        else
+            ret=0;
+    }
+    return ret;
+}
+
+long ZCALLBACK win32_seek64_file_func (voidpf opaque, voidpf stream,ZPOS64_T offset,int origin)
+{
+    DWORD dwMoveMethod=0xFFFFFFFF;
+    HANDLE hFile = NULL;
+    long ret=-1;
+
+    if (stream!=NULL)
+        hFile = ((WIN32FILE_IOWIN*)stream)->hf;
+
+    switch (origin)
+    {
+        case ZLIB_FILEFUNC_SEEK_CUR :
+            dwMoveMethod = FILE_CURRENT;
+            break;
+        case ZLIB_FILEFUNC_SEEK_END :
+            dwMoveMethod = FILE_END;
+            break;
+        case ZLIB_FILEFUNC_SEEK_SET :
+            dwMoveMethod = FILE_BEGIN;
+            break;
+        default: return -1;
+    }
+
+    if (hFile)
+    {
+        LARGE_INTEGER* li = (LARGE_INTEGER*)&offset;
+        DWORD dwSet = SetFilePointer(hFile, li->u.LowPart, &li->u.HighPart, dwMoveMethod);
+        if (dwSet == INVALID_SET_FILE_POINTER)
+        {
+            DWORD dwErr = GetLastError();
+            ((WIN32FILE_IOWIN*)stream) -> error=(int)dwErr;
+            ret = -1;
+        }
+        else
+            ret=0;
+    }
+    return ret;
+}
+
+int ZCALLBACK win32_close_file_func (voidpf opaque, voidpf stream)
+{
+    int ret=-1;
+
+    if (stream!=NULL)
+    {
+        HANDLE hFile;
+        hFile = ((WIN32FILE_IOWIN*)stream) -> hf;
+        if (hFile != NULL)
+        {
+            CloseHandle(hFile);
+            ret=0;
+        }
+        free(stream);
+    }
+    return ret;
+}
+
+int ZCALLBACK win32_error_file_func (voidpf opaque,voidpf stream)
+{
+    int ret=-1;
+    if (stream!=NULL)
+    {
+        ret = ((WIN32FILE_IOWIN*)stream) -> error;
+    }
+    return ret;
+}
+
+void fill_win32_filefunc (zlib_filefunc_def* pzlib_filefunc_def)
+{
+    pzlib_filefunc_def->zopen_file = win32_open_file_func;
+    pzlib_filefunc_def->zread_file = win32_read_file_func;
+    pzlib_filefunc_def->zwrite_file = win32_write_file_func;
+    pzlib_filefunc_def->ztell_file = win32_tell_file_func;
+    pzlib_filefunc_def->zseek_file = win32_seek_file_func;
+    pzlib_filefunc_def->zclose_file = win32_close_file_func;
+    pzlib_filefunc_def->zerror_file = win32_error_file_func;
+    pzlib_filefunc_def->opaque = NULL;
+}
+
+void fill_win32_filefunc64(zlib_filefunc64_def* pzlib_filefunc_def)
+{
+    pzlib_filefunc_def->zopen64_file = win32_open64_file_func;
+    pzlib_filefunc_def->zread_file = win32_read_file_func;
+    pzlib_filefunc_def->zwrite_file = win32_write_file_func;
+    pzlib_filefunc_def->ztell64_file = win32_tell64_file_func;
+    pzlib_filefunc_def->zseek64_file = win32_seek64_file_func;
+    pzlib_filefunc_def->zclose_file = win32_close_file_func;
+    pzlib_filefunc_def->zerror_file = win32_error_file_func;
+    pzlib_filefunc_def->opaque = NULL;
+}
+
+
+void fill_win32_filefunc64A(zlib_filefunc64_def* pzlib_filefunc_def)
+{
+    pzlib_filefunc_def->zopen64_file = win32_open64_file_funcA;
+    pzlib_filefunc_def->zread_file = win32_read_file_func;
+    pzlib_filefunc_def->zwrite_file = win32_write_file_func;
+    pzlib_filefunc_def->ztell64_file = win32_tell64_file_func;
+    pzlib_filefunc_def->zseek64_file = win32_seek64_file_func;
+    pzlib_filefunc_def->zclose_file = win32_close_file_func;
+    pzlib_filefunc_def->zerror_file = win32_error_file_func;
+    pzlib_filefunc_def->opaque = NULL;
+}
+
+
+void fill_win32_filefunc64W(zlib_filefunc64_def* pzlib_filefunc_def)
+{
+    pzlib_filefunc_def->zopen64_file = win32_open64_file_funcW;
+    pzlib_filefunc_def->zread_file = win32_read_file_func;
+    pzlib_filefunc_def->zwrite_file = win32_write_file_func;
+    pzlib_filefunc_def->ztell64_file = win32_tell64_file_func;
+    pzlib_filefunc_def->zseek64_file = win32_seek64_file_func;
+    pzlib_filefunc_def->zclose_file = win32_close_file_func;
+    pzlib_filefunc_def->zerror_file = win32_error_file_func;
+    pzlib_filefunc_def->opaque = NULL;
+}

contrib/minizip/iowin32.h

@@ -0,0 +1,28 @@
+/* iowin32.h -- IO base function header for compress/uncompress .zip
+     Version 1.1, February 14h, 2010
+     part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
+
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+         Modifications for Zip64 support
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+
+         For more info read MiniZip_info.txt
+
+*/
+
+#include <windows.h>
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void fill_win32_filefunc OF((zlib_filefunc_def* pzlib_filefunc_def));
+void fill_win32_filefunc64 OF((zlib_filefunc64_def* pzlib_filefunc_def));
+void fill_win32_filefunc64A OF((zlib_filefunc64_def* pzlib_filefunc_def));
+void fill_win32_filefunc64W OF((zlib_filefunc64_def* pzlib_filefunc_def));
+
+#ifdef __cplusplus
+}
+#endif

contrib/minizip/make_vms.com

@@ -0,0 +1,25 @@
+$ if f$search("ioapi.h_orig") .eqs. "" then copy ioapi.h ioapi.h_orig
+$ open/write zdef vmsdefs.h
+$ copy sys$input: zdef
+$ deck
+#define unix
+#define fill_zlib_filefunc64_32_def_from_filefunc32 fillzffunc64from
+#define Write_Zip64EndOfCentralDirectoryLocator Write_Zip64EoDLocator
+#define Write_Zip64EndOfCentralDirectoryRecord Write_Zip64EoDRecord
+#define Write_EndOfCentralDirectoryRecord Write_EoDRecord
+$ eod
+$ close zdef
+$ copy vmsdefs.h,ioapi.h_orig ioapi.h
+$ cc/include=[--]/prefix=all ioapi.c
+$ cc/include=[--]/prefix=all miniunz.c
+$ cc/include=[--]/prefix=all unzip.c
+$ cc/include=[--]/prefix=all minizip.c
+$ cc/include=[--]/prefix=all zip.c
+$ link miniunz,unzip,ioapi,[--]libz.olb/lib
+$ link minizip,zip,ioapi,[--]libz.olb/lib
+$ mcr []minizip test minizip_info.txt
+$ mcr []miniunz -l test.zip
+$ rename minizip_info.txt; minizip_info.txt_old
+$ mcr []miniunz test.zip
+$ delete test.zip;*
+$exit

contrib/minizip/miniunz.c

@@ -0,0 +1,648 @@
+/*
+   miniunz.c
+   Version 1.1, February 14h, 2010
+   sample part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
+
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+         Modifications of Unzip for Zip64
+         Copyright (C) 2007-2008 Even Rouault
+
+         Modifications for Zip64 support on both zip and unzip
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+*/
+
+#ifndef _WIN32
+        #ifndef __USE_FILE_OFFSET64
+                #define __USE_FILE_OFFSET64
+        #endif
+        #ifndef __USE_LARGEFILE64
+                #define __USE_LARGEFILE64
+        #endif
+        #ifndef _LARGEFILE64_SOURCE
+                #define _LARGEFILE64_SOURCE
+        #endif
+        #ifndef _FILE_OFFSET_BIT
+                #define _FILE_OFFSET_BIT 64
+        #endif
+#endif
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <errno.h>
+#include <fcntl.h>
+
+#ifdef unix
+# include <unistd.h>
+# include <utime.h>
+#else
+# include <direct.h>
+# include <io.h>
+#endif
+
+#include "unzip.h"
+
+#define CASESENSITIVITY (0)
+#define WRITEBUFFERSIZE (8192)
+#define MAXFILENAME (256)
+
+#ifdef _WIN32
+#define USEWIN32IOAPI
+#include "iowin32.h"
+#endif
+/*
+  mini unzip, demo of unzip package
+
+  usage :
+  Usage : miniunz [-exvlo] file.zip [file_to_extract] [-d extractdir]
+
+  list the file in the zipfile, and print the content of FILE_ID.ZIP or README.TXT
+    if it exists
+*/
+
+
+/* change_file_date : change the date/time of a file
+    filename : the filename of the file where date/time must be modified
+    dosdate : the new date at the MSDos format (4 bytes)
+    tmu_date : the SAME new date at the tm_unz format */
+void change_file_date(filename,dosdate,tmu_date)
+    const char *filename;
+    uLong dosdate;
+    tm_unz tmu_date;
+{
+#ifdef _WIN32
+  HANDLE hFile;
+  FILETIME ftm,ftLocal,ftCreate,ftLastAcc,ftLastWrite;
+
+  hFile = CreateFileA(filename,GENERIC_READ | GENERIC_WRITE,
+                      0,NULL,OPEN_EXISTING,0,NULL);
+  GetFileTime(hFile,&ftCreate,&ftLastAcc,&ftLastWrite);
+  DosDateTimeToFileTime((WORD)(dosdate>>16),(WORD)dosdate,&ftLocal);
+  LocalFileTimeToFileTime(&ftLocal,&ftm);
+  SetFileTime(hFile,&ftm,&ftLastAcc,&ftm);
+  CloseHandle(hFile);
+#else
+#ifdef unix
+  struct utimbuf ut;
+  struct tm newdate;
+  newdate.tm_sec = tmu_date.tm_sec;
+  newdate.tm_min=tmu_date.tm_min;
+  newdate.tm_hour=tmu_date.tm_hour;
+  newdate.tm_mday=tmu_date.tm_mday;
+  newdate.tm_mon=tmu_date.tm_mon;
+  if (tmu_date.tm_year > 1900)
+      newdate.tm_year=tmu_date.tm_year - 1900;
+  else
+      newdate.tm_year=tmu_date.tm_year ;
+  newdate.tm_isdst=-1;
+
+  ut.actime=ut.modtime=mktime(&newdate);
+  utime(filename,&ut);
+#endif
+#endif
+}
+
+
+/* mymkdir and change_file_date are not 100 % portable
+   As I don't know well Unix, I wait feedback for the unix portion */
+
+int mymkdir(dirname)
+    const char* dirname;
+{
+    int ret=0;
+#ifdef _WIN32
+    ret = _mkdir(dirname);
+#else
+#ifdef unix
+    ret = mkdir (dirname,0775);
+#endif
+#endif
+    return ret;
+}
+
+int makedir (newdir)
+    char *newdir;
+{
+  char *buffer ;
+  char *p;
+  int  len = (int)strlen(newdir);
+
+  if (len <= 0)
+    return 0;
+
+  buffer = (char*)malloc(len+1);
+        if (buffer==NULL)
+        {
+                printf("Error allocating memory\n");
+                return UNZ_INTERNALERROR;
+        }
+  strcpy(buffer,newdir);
+
+  if (buffer[len-1] == '/') {
+    buffer[len-1] = '\0';
+  }
+  if (mymkdir(buffer) == 0)
+    {
+      free(buffer);
+      return 1;
+    }
+
+  p = buffer+1;
+  while (1)
+    {
+      char hold;
+
+      while(*p && *p != '\\' && *p != '/')
+        p++;
+      hold = *p;
+      *p = 0;
+      if ((mymkdir(buffer) == -1) && (errno == ENOENT))
+        {
+          printf("couldn't create directory %s\n",buffer);
+          free(buffer);
+          return 0;
+        }
+      if (hold == 0)
+        break;
+      *p++ = hold;
+    }
+  free(buffer);
+  return 1;
+}
+
+void do_banner()
+{
+    printf("MiniUnz 1.01b, demo of zLib + Unz package written by Gilles Vollant\n");
+    printf("more info at http://www.winimage.com/zLibDll/unzip.html\n\n");
+}
+
+void do_help()
+{
+    printf("Usage : miniunz [-e] [-x] [-v] [-l] [-o] [-p password] file.zip [file_to_extr.] [-d extractdir]\n\n" \
+           "  -e  Extract without pathname (junk paths)\n" \
+           "  -x  Extract with pathname\n" \
+           "  -v  list files\n" \
+           "  -l  list files\n" \
+           "  -d  directory to extract into\n" \
+           "  -o  overwrite files without prompting\n" \
+           "  -p  extract crypted file using password\n\n");
+}
+
+void Display64BitsSize(ZPOS64_T n, int size_char)
+{
+  /* to avoid compatibility problem , we do here the conversion */
+  char number[21];
+  int offset=19;
+  int pos_string = 19;
+  number[20]=0;
+  for (;;) {
+      number[offset]=(char)((n%10)+'0');
+      if (number[offset] != '0')
+          pos_string=offset;
+      n/=10;
+      if (offset==0)
+          break;
+      offset--;
+  }
+  {
+      int size_display_string = 19-pos_string;
+      while (size_char > size_display_string)
+      {
+          size_char--;
+          printf(" ");
+      }
+  }
+
+  printf("%s",&number[pos_string]);
+}
+
+int do_list(uf)
+    unzFile uf;
+{
+    uLong i;
+    unz_global_info64 gi;
+    int err;
+
+    err = unzGetGlobalInfo64(uf,&gi);
+    if (err!=UNZ_OK)
+        printf("error %d with zipfile in unzGetGlobalInfo \n",err);
+    printf("  Length  Method     Size Ratio   Date    Time   CRC-32     Name\n");
+    printf("  ------  ------     ---- -----   ----    ----   ------     ----\n");
+    for (i=0;i<gi.number_entry;i++)
+    {
+        char filename_inzip[256];
+        unz_file_info64 file_info;
+        uLong ratio=0;
+        const char *string_method;
+        char charCrypt=' ';
+        err = unzGetCurrentFileInfo64(uf,&file_info,filename_inzip,sizeof(filename_inzip),NULL,0,NULL,0);
+        if (err!=UNZ_OK)
+        {
+            printf("error %d with zipfile in unzGetCurrentFileInfo\n",err);
+            break;
+        }
+        if (file_info.uncompressed_size>0)
+            ratio = (uLong)((file_info.compressed_size*100)/file_info.uncompressed_size);
+
+        /* display a '*' if the file is crypted */
+        if ((file_info.flag & 1) != 0)
+            charCrypt='*';
+
+        if (file_info.compression_method==0)
+            string_method="Stored";
+        else
+        if (file_info.compression_method==Z_DEFLATED)
+        {
+            uInt iLevel=(uInt)((file_info.flag & 0x6)/2);
+            if (iLevel==0)
+              string_method="Defl:N";
+            else if (iLevel==1)
+              string_method="Defl:X";
+            else if ((iLevel==2) || (iLevel==3))
+              string_method="Defl:F"; /* 2:fast , 3 : extra fast*/
+        }
+        else
+        if (file_info.compression_method==Z_BZIP2ED)
+        {
+              string_method="BZip2 ";
+        }
+        else
+            string_method="Unkn. ";
+
+        Display64BitsSize(file_info.uncompressed_size,7);
+        printf("  %6s%c",string_method,charCrypt);
+        Display64BitsSize(file_info.compressed_size,7);
+        printf(" %3lu%%  %2.2lu-%2.2lu-%2.2lu  %2.2lu:%2.2lu  %8.8lx   %s\n",
+                ratio,
+                (uLong)file_info.tmu_date.tm_mon + 1,
+                (uLong)file_info.tmu_date.tm_mday,
+                (uLong)file_info.tmu_date.tm_year % 100,
+                (uLong)file_info.tmu_date.tm_hour,(uLong)file_info.tmu_date.tm_min,
+                (uLong)file_info.crc,filename_inzip);
+        if ((i+1)<gi.number_entry)
+        {
+            err = unzGoToNextFile(uf);
+            if (err!=UNZ_OK)
+            {
+                printf("error %d with zipfile in unzGoToNextFile\n",err);
+                break;
+            }
+        }
+    }
+
+    return 0;
+}
+
+
+int do_extract_currentfile(uf,popt_extract_without_path,popt_overwrite,password)
+    unzFile uf;
+    const int* popt_extract_without_path;
+    int* popt_overwrite;
+    const char* password;
+{
+    char filename_inzip[256];
+    char* filename_withoutpath;
+    char* p;
+    int err=UNZ_OK;
+    FILE *fout=NULL;
+    void* buf;
+    uInt size_buf;
+
+    unz_file_info64 file_info;
+    uLong ratio=0;
+    err = unzGetCurrentFileInfo64(uf,&file_info,filename_inzip,sizeof(filename_inzip),NULL,0,NULL,0);
+
+    if (err!=UNZ_OK)
+    {
+        printf("error %d with zipfile in unzGetCurrentFileInfo\n",err);
+        return err;
+    }
+
+    size_buf = WRITEBUFFERSIZE;
+    buf = (void*)malloc(size_buf);
+    if (buf==NULL)
+    {
+        printf("Error allocating memory\n");
+        return UNZ_INTERNALERROR;
+    }
+
+    p = filename_withoutpath = filename_inzip;
+    while ((*p) != '\0')
+    {
+        if (((*p)=='/') || ((*p)=='\\'))
+            filename_withoutpath = p+1;
+        p++;
+    }
+
+    if ((*filename_withoutpath)=='\0')
+    {
+        if ((*popt_extract_without_path)==0)
+        {
+            printf("creating directory: %s\n",filename_inzip);
+            mymkdir(filename_inzip);
+        }
+    }
+    else
+    {
+        const char* write_filename;
+        int skip=0;
+
+        if ((*popt_extract_without_path)==0)
+            write_filename = filename_inzip;
+        else
+            write_filename = filename_withoutpath;
+
+        err = unzOpenCurrentFilePassword(uf,password);
+        if (err!=UNZ_OK)
+        {
+            printf("error %d with zipfile in unzOpenCurrentFilePassword\n",err);
+        }
+
+        if (((*popt_overwrite)==0) && (err==UNZ_OK))
+        {
+            char rep=0;
+            FILE* ftestexist;
+            ftestexist = fopen64(write_filename,"rb");
+            if (ftestexist!=NULL)
+            {
+                fclose(ftestexist);
+                do
+                {
+                    char answer[128];
+                    int ret;
+
+                    printf("The file %s exists. Overwrite ? [y]es, [n]o, [A]ll: ",write_filename);
+                    ret = scanf("%1s",answer);
+                    if (ret != 1)
+                    {
+                       exit(EXIT_FAILURE);
+                    }
+                    rep = answer[0] ;
+                    if ((rep>='a') && (rep<='z'))
+                        rep -= 0x20;
+                }
+                while ((rep!='Y') && (rep!='N') && (rep!='A'));
+            }
+
+            if (rep == 'N')
+                skip = 1;
+
+            if (rep == 'A')
+                *popt_overwrite=1;
+        }
+
+        if ((skip==0) && (err==UNZ_OK))
+        {
+            fout=fopen64(write_filename,"wb");
+
+            /* some zipfile don't contain directory alone before file */
+            if ((fout==NULL) && ((*popt_extract_without_path)==0) &&
+                                (filename_withoutpath!=(char*)filename_inzip))
+            {
+                char c=*(filename_withoutpath-1);
+                *(filename_withoutpath-1)='\0';
+                makedir(write_filename);
+                *(filename_withoutpath-1)=c;
+                fout=fopen64(write_filename,"wb");
+            }
+
+            if (fout==NULL)
+            {
+                printf("error opening %s\n",write_filename);
+            }
+        }
+
+        if (fout!=NULL)
+        {
+            printf(" extracting: %s\n",write_filename);
+
+            do
+            {
+                err = unzReadCurrentFile(uf,buf,size_buf);
+                if (err<0)
+                {
+                    printf("error %d with zipfile in unzReadCurrentFile\n",err);
+                    break;
+                }
+                if (err>0)
+                    if (fwrite(buf,err,1,fout)!=1)
+                    {
+                        printf("error in writing extracted file\n");
+                        err=UNZ_ERRNO;
+                        break;
+                    }
+            }
+            while (err>0);
+            if (fout)
+                    fclose(fout);
+
+            if (err==0)
+                change_file_date(write_filename,file_info.dosDate,
+                                 file_info.tmu_date);
+        }
+
+        if (err==UNZ_OK)
+        {
+            err = unzCloseCurrentFile (uf);
+            if (err!=UNZ_OK)
+            {
+                printf("error %d with zipfile in unzCloseCurrentFile\n",err);
+            }
+        }
+        else
+            unzCloseCurrentFile(uf); /* don't lose the error */
+    }
+
+    free(buf);
+    return err;
+}
+
+
+int do_extract(uf,opt_extract_without_path,opt_overwrite,password)
+    unzFile uf;
+    int opt_extract_without_path;
+    int opt_overwrite;
+    const char* password;
+{
+    uLong i;
+    unz_global_info64 gi;
+    int err;
+    FILE* fout=NULL;
+
+    err = unzGetGlobalInfo64(uf,&gi);
+    if (err!=UNZ_OK)
+        printf("error %d with zipfile in unzGetGlobalInfo \n",err);
+
+    for (i=0;i<gi.number_entry;i++)
+    {
+        if (do_extract_currentfile(uf,&opt_extract_without_path,
+                                      &opt_overwrite,
+                                      password) != UNZ_OK)
+            break;
+
+        if ((i+1)<gi.number_entry)
+        {
+            err = unzGoToNextFile(uf);
+            if (err!=UNZ_OK)
+            {
+                printf("error %d with zipfile in unzGoToNextFile\n",err);
+                break;
+            }
+        }
+    }
+
+    return 0;
+}
+
+int do_extract_onefile(uf,filename,opt_extract_without_path,opt_overwrite,password)
+    unzFile uf;
+    const char* filename;
+    int opt_extract_without_path;
+    int opt_overwrite;
+    const char* password;
+{
+    int err = UNZ_OK;
+    if (unzLocateFile(uf,filename,CASESENSITIVITY)!=UNZ_OK)
+    {
+        printf("file %s not found in the zipfile\n",filename);
+        return 2;
+    }
+
+    if (do_extract_currentfile(uf,&opt_extract_without_path,
+                                      &opt_overwrite,
+                                      password) == UNZ_OK)
+        return 0;
+    else
+        return 1;
+}
+
+
+int main(argc,argv)
+    int argc;
+    char *argv[];
+{
+    const char *zipfilename=NULL;
+    const char *filename_to_extract=NULL;
+    const char *password=NULL;
+    char filename_try[MAXFILENAME+16] = "";
+    int i;
+    int ret_value=0;
+    int opt_do_list=0;
+    int opt_do_extract=1;
+    int opt_do_extract_withoutpath=0;
+    int opt_overwrite=0;
+    int opt_extractdir=0;
+    const char *dirname=NULL;
+    unzFile uf=NULL;
+
+    do_banner();
+    if (argc==1)
+    {
+        do_help();
+        return 0;
+    }
+    else
+    {
+        for (i=1;i<argc;i++)
+        {
+            if ((*argv[i])=='-')
+            {
+                const char *p=argv[i]+1;
+
+                while ((*p)!='\0')
+                {
+                    char c=*(p++);;
+                    if ((c=='l') || (c=='L'))
+                        opt_do_list = 1;
+                    if ((c=='v') || (c=='V'))
+                        opt_do_list = 1;
+                    if ((c=='x') || (c=='X'))
+                        opt_do_extract = 1;
+                    if ((c=='e') || (c=='E'))
+                        opt_do_extract = opt_do_extract_withoutpath = 1;
+                    if ((c=='o') || (c=='O'))
+                        opt_overwrite=1;
+                    if ((c=='d') || (c=='D'))
+                    {
+                        opt_extractdir=1;
+                        dirname=argv[i+1];
+                    }
+
+                    if (((c=='p') || (c=='P')) && (i+1<argc))
+                    {
+                        password=argv[i+1];
+                        i++;
+                    }
+                }
+            }
+            else
+            {
+                if (zipfilename == NULL)
+                    zipfilename = argv[i];
+                else if ((filename_to_extract==NULL) && (!opt_extractdir))
+                        filename_to_extract = argv[i] ;
+            }
+        }
+    }
+
+    if (zipfilename!=NULL)
+    {
+
+#        ifdef USEWIN32IOAPI
+        zlib_filefunc64_def ffunc;
+#        endif
+
+        strncpy(filename_try, zipfilename,MAXFILENAME-1);
+        /* strncpy doesnt append the trailing NULL, of the string is too long. */
+        filename_try[ MAXFILENAME ] = '\0';
+
+#        ifdef USEWIN32IOAPI
+        fill_win32_filefunc64A(&ffunc);
+        uf = unzOpen2_64(zipfilename,&ffunc);
+#        else
+        uf = unzOpen64(zipfilename);
+#        endif
+        if (uf==NULL)
+        {
+            strcat(filename_try,".zip");
+#            ifdef USEWIN32IOAPI
+            uf = unzOpen2_64(filename_try,&ffunc);
+#            else
+            uf = unzOpen64(filename_try);
+#            endif
+        }
+    }
+
+    if (uf==NULL)
+    {
+        printf("Cannot open %s or %s.zip\n",zipfilename,zipfilename);
+        return 1;
+    }
+    printf("%s opened\n",filename_try);
+
+    if (opt_do_list==1)
+        ret_value = do_list(uf);
+    else if (opt_do_extract==1)
+    {
+#ifdef _WIN32
+        if (opt_extractdir && _chdir(dirname))
+#else
+        if (opt_extractdir && chdir(dirname))
+#endif
+        {
+          printf("Error changing into %s, aborting\n", dirname);
+          exit(-1);
+        }
+
+        if (filename_to_extract == NULL)
+            ret_value = do_extract(uf, opt_do_extract_withoutpath, opt_overwrite, password);
+        else
+            ret_value = do_extract_onefile(uf, filename_to_extract, opt_do_extract_withoutpath, opt_overwrite, password);
+    }
+
+    unzClose(uf);
+
+    return ret_value;
+}

contrib/minizip/minizip.c

@@ -0,0 +1,507 @@
+/*
+   minizip.c
+   Version 1.1, February 14h, 2010
+   sample part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
+
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+         Modifications of Unzip for Zip64
+         Copyright (C) 2007-2008 Even Rouault
+
+         Modifications for Zip64 support on both zip and unzip
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+*/
+
+
+#ifndef _WIN32
+        #ifndef __USE_FILE_OFFSET64
+                #define __USE_FILE_OFFSET64
+        #endif
+        #ifndef __USE_LARGEFILE64
+                #define __USE_LARGEFILE64
+        #endif
+        #ifndef _LARGEFILE64_SOURCE
+                #define _LARGEFILE64_SOURCE
+        #endif
+        #ifndef _FILE_OFFSET_BIT
+                #define _FILE_OFFSET_BIT 64
+        #endif
+#endif
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <errno.h>
+#include <fcntl.h>
+
+#ifdef unix
+# include <unistd.h>
+# include <utime.h>
+# include <sys/types.h>
+# include <sys/stat.h>
+#else
+# include <direct.h>
+# include <io.h>
+#endif
+
+#include "zip.h"
+
+#ifdef _WIN32
+        #define USEWIN32IOAPI
+        #include "iowin32.h"
+#endif
+
+
+
+#define WRITEBUFFERSIZE (16384)
+#define MAXFILENAME (256)
+
+#ifdef _WIN32
+uLong filetime(f, tmzip, dt)
+    char *f;                /* name of file to get info on */
+    tm_zip *tmzip;             /* return value: access, modific. and creation times */
+    uLong *dt;             /* dostime */
+{
+  int ret = 0;
+  {
+      FILETIME ftLocal;
+      HANDLE hFind;
+      WIN32_FIND_DATAA ff32;
+
+      hFind = FindFirstFileA(f,&ff32);
+      if (hFind != INVALID_HANDLE_VALUE)
+      {
+        FileTimeToLocalFileTime(&(ff32.ftLastWriteTime),&ftLocal);
+        FileTimeToDosDateTime(&ftLocal,((LPWORD)dt)+1,((LPWORD)dt)+0);
+        FindClose(hFind);
+        ret = 1;
+      }
+  }
+  return ret;
+}
+#else
+#ifdef unix
+uLong filetime(f, tmzip, dt)
+    char *f;               /* name of file to get info on */
+    tm_zip *tmzip;         /* return value: access, modific. and creation times */
+    uLong *dt;             /* dostime */
+{
+  int ret=0;
+  struct stat s;        /* results of stat() */
+  struct tm* filedate;
+  time_t tm_t=0;
+
+  if (strcmp(f,"-")!=0)
+  {
+    char name[MAXFILENAME+1];
+    int len = strlen(f);
+    if (len > MAXFILENAME)
+      len = MAXFILENAME;
+
+    strncpy(name, f,MAXFILENAME-1);
+    /* strncpy doesnt append the trailing NULL, of the string is too long. */
+    name[ MAXFILENAME ] = '\0';
+
+    if (name[len - 1] == '/')
+      name[len - 1] = '\0';
+    /* not all systems allow stat'ing a file with / appended */
+    if (stat(name,&s)==0)
+    {
+      tm_t = s.st_mtime;
+      ret = 1;
+    }
+  }
+  filedate = localtime(&tm_t);
+
+  tmzip->tm_sec  = filedate->tm_sec;
+  tmzip->tm_min  = filedate->tm_min;
+  tmzip->tm_hour = filedate->tm_hour;
+  tmzip->tm_mday = filedate->tm_mday;
+  tmzip->tm_mon  = filedate->tm_mon ;
+  tmzip->tm_year = filedate->tm_year;
+
+  return ret;
+}
+#else
+uLong filetime(f, tmzip, dt)
+    char *f;                /* name of file to get info on */
+    tm_zip *tmzip;             /* return value: access, modific. and creation times */
+    uLong *dt;             /* dostime */
+{
+    return 0;
+}
+#endif
+#endif
+
+
+
+
+int check_exist_file(filename)
+    const char* filename;
+{
+    FILE* ftestexist;
+    int ret = 1;
+    ftestexist = fopen64(filename,"rb");
+    if (ftestexist==NULL)
+        ret = 0;
+    else
+        fclose(ftestexist);
+    return ret;
+}
+
+void do_banner()
+{
+    printf("MiniZip 1.1, demo of zLib + MiniZip64 package, written by Gilles Vollant\n");
+    printf("more info on MiniZip at http://www.winimage.com/zLibDll/minizip.html\n\n");
+}
+
+void do_help()
+{
+    printf("Usage : minizip [-o] [-a] [-0 to -9] [-p password] [-j] file.zip [files_to_add]\n\n" \
+           "  -o  Overwrite existing file.zip\n" \
+           "  -a  Append to existing file.zip\n" \
+           "  -0  Store only\n" \
+           "  -1  Compress faster\n" \
+           "  -9  Compress better\n\n" \
+           "  -j  exclude path. store only the file name.\n\n");
+}
+
+/* calculate the CRC32 of a file,
+   because to encrypt a file, we need known the CRC32 of the file before */
+int getFileCrc(const char* filenameinzip,void*buf,unsigned long size_buf,unsigned long* result_crc)
+{
+   unsigned long calculate_crc=0;
+   int err=ZIP_OK;
+   FILE * fin = fopen64(filenameinzip,"rb");
+   unsigned long size_read = 0;
+   unsigned long total_read = 0;
+   if (fin==NULL)
+   {
+       err = ZIP_ERRNO;
+   }
+
+    if (err == ZIP_OK)
+        do
+        {
+            err = ZIP_OK;
+            size_read = (int)fread(buf,1,size_buf,fin);
+            if (size_read < size_buf)
+                if (feof(fin)==0)
+            {
+                printf("error in reading %s\n",filenameinzip);
+                err = ZIP_ERRNO;
+            }
+
+            if (size_read>0)
+                calculate_crc = crc32(calculate_crc,buf,size_read);
+            total_read += size_read;
+
+        } while ((err == ZIP_OK) && (size_read>0));
+
+    if (fin)
+        fclose(fin);
+
+    *result_crc=calculate_crc;
+    printf("file %s crc %lx\n", filenameinzip, calculate_crc);
+    return err;
+}
+
+int isLargeFile(const char* filename)
+{
+  int largeFile = 0;
+  ZPOS64_T pos = 0;
+  FILE* pFile = fopen64(filename, "rb");
+
+  if(pFile != NULL)
+  {
+    int n = fseeko64(pFile, 0, SEEK_END);
+
+    pos = ftello64(pFile);
+
+                printf("File : %s is %lld bytes\n", filename, pos);
+
+    if(pos >= 0xffffffff)
+     largeFile = 1;
+
+                fclose(pFile);
+  }
+
+ return largeFile;
+}
+
+int main(argc,argv)
+    int argc;
+    char *argv[];
+{
+    int i;
+    int opt_overwrite=0;
+    int opt_compress_level=Z_DEFAULT_COMPRESSION;
+    int opt_exclude_path=0;
+    int zipfilenamearg = 0;
+    char filename_try[MAXFILENAME+16];
+    int zipok;
+    int err=0;
+    int size_buf=0;
+    void* buf=NULL;
+    const char* password=NULL;
+
+
+    do_banner();
+    if (argc==1)
+    {
+        do_help();
+        return 0;
+    }
+    else
+    {
+        for (i=1;i<argc;i++)
+        {
+            if ((*argv[i])=='-')
+            {
+                const char *p=argv[i]+1;
+
+                while ((*p)!='\0')
+                {
+                    char c=*(p++);;
+                    if ((c=='o') || (c=='O'))
+                        opt_overwrite = 1;
+                    if ((c=='a') || (c=='A'))
+                        opt_overwrite = 2;
+                    if ((c>='0') && (c<='9'))
+                        opt_compress_level = c-'0';
+                    if ((c=='j') || (c=='J'))
+                        opt_exclude_path = 1;
+
+                    if (((c=='p') || (c=='P')) && (i+1<argc))
+                    {
+                        password=argv[i+1];
+                        i++;
+                    }
+                }
+            }
+            else
+            {
+                if (zipfilenamearg == 0)
+                {
+                    zipfilenamearg = i ;
+                }
+            }
+        }
+    }
+
+    size_buf = WRITEBUFFERSIZE;
+    buf = (void*)malloc(size_buf);
+    if (buf==NULL)
+    {
+        printf("Error allocating memory\n");
+        return ZIP_INTERNALERROR;
+    }
+
+    if (zipfilenamearg==0)
+    {
+        zipok=0;
+    }
+    else
+    {
+        int i,len;
+        int dot_found=0;
+
+        zipok = 1 ;
+        strncpy(filename_try, argv[zipfilenamearg],MAXFILENAME-1);
+        /* strncpy doesnt append the trailing NULL, of the string is too long. */
+        filename_try[ MAXFILENAME ] = '\0';
+
+        len=(int)strlen(filename_try);
+        for (i=0;i<len;i++)
+            if (filename_try[i]=='.')
+                dot_found=1;
+
+        if (dot_found==0)
+            strcat(filename_try,".zip");
+
+        if (opt_overwrite==2)
+        {
+            /* if the file don't exist, we not append file */
+            if (check_exist_file(filename_try)==0)
+                opt_overwrite=1;
+        }
+        else
+        if (opt_overwrite==0)
+            if (check_exist_file(filename_try)!=0)
+            {
+                char rep=0;
+                do
+                {
+                    char answer[128];
+                    int ret;
+                    printf("The file %s exists. Overwrite ? [y]es, [n]o, [a]ppend : ",filename_try);
+                    ret = scanf("%1s",answer);
+                    if (ret != 1)
+                    {
+                       exit(EXIT_FAILURE);
+                    }
+                    rep = answer[0] ;
+                    if ((rep>='a') && (rep<='z'))
+                        rep -= 0x20;
+                }
+                while ((rep!='Y') && (rep!='N') && (rep!='A'));
+                if (rep=='N')
+                    zipok = 0;
+                if (rep=='A')
+                    opt_overwrite = 2;
+            }
+    }
+
+    if (zipok==1)
+    {
+        zipFile zf;
+        int errclose;
+#        ifdef USEWIN32IOAPI
+        zlib_filefunc64_def ffunc;
+        fill_win32_filefunc64A(&ffunc);
+        zf = zipOpen2_64(filename_try,(opt_overwrite==2) ? 2 : 0,NULL,&ffunc);
+#        else
+        zf = zipOpen64(filename_try,(opt_overwrite==2) ? 2 : 0);
+#        endif
+
+        if (zf == NULL)
+        {
+            printf("error opening %s\n",filename_try);
+            err= ZIP_ERRNO;
+        }
+        else
+            printf("creating %s\n",filename_try);
+
+        for (i=zipfilenamearg+1;(i<argc) && (err==ZIP_OK);i++)
+        {
+            if (!((((*(argv[i]))=='-') || ((*(argv[i]))=='/')) &&
+                  ((argv[i][1]=='o') || (argv[i][1]=='O') ||
+                   (argv[i][1]=='a') || (argv[i][1]=='A') ||
+                   (argv[i][1]=='p') || (argv[i][1]=='P') ||
+                   ((argv[i][1]>='0') || (argv[i][1]<='9'))) &&
+                  (strlen(argv[i]) == 2)))
+            {
+                FILE * fin;
+                int size_read;
+                const char* filenameinzip = argv[i];
+                const char *savefilenameinzip;
+                zip_fileinfo zi;
+                unsigned long crcFile=0;
+                int zip64 = 0;
+
+                zi.tmz_date.tm_sec = zi.tmz_date.tm_min = zi.tmz_date.tm_hour =
+                zi.tmz_date.tm_mday = zi.tmz_date.tm_mon = zi.tmz_date.tm_year = 0;
+                zi.dosDate = 0;
+                zi.internal_fa = 0;
+                zi.external_fa = 0;
+                filetime(filenameinzip,&zi.tmz_date,&zi.dosDate);
+
+/*
+                err = zipOpenNewFileInZip(zf,filenameinzip,&zi,
+                                 NULL,0,NULL,0,NULL / * comment * /,
+                                 (opt_compress_level != 0) ? Z_DEFLATED : 0,
+                                 opt_compress_level);
+*/
+                if ((password != NULL) && (err==ZIP_OK))
+                    err = getFileCrc(filenameinzip,buf,size_buf,&crcFile);
+
+                zip64 = isLargeFile(filenameinzip);
+
+                                                         /* The path name saved, should not include a leading slash. */
+               /*if it did, windows/xp and dynazip couldn't read the zip file. */
+                 savefilenameinzip = filenameinzip;
+                 while( savefilenameinzip[0] == '\\' || savefilenameinzip[0] == '/' )
+                 {
+                     savefilenameinzip++;
+                 }
+
+                 /*should the zip file contain any path at all?*/
+                 if( opt_exclude_path )
+                 {
+                     const char *tmpptr;
+                     const char *lastslash = 0;
+                     for( tmpptr = savefilenameinzip; *tmpptr; tmpptr++)
+                     {
+                         if( *tmpptr == '\\' || *tmpptr == '/')
+                         {
+                             lastslash = tmpptr;
+                         }
+                     }
+                     if( lastslash != NULL )
+                     {
+                         savefilenameinzip = lastslash+1; // base filename follows last slash.
+                     }
+                 }
+
+                 /**/
+                err = zipOpenNewFileInZip3_64(zf,savefilenameinzip,&zi,
+                                 NULL,0,NULL,0,NULL /* comment*/,
+                                 (opt_compress_level != 0) ? Z_DEFLATED : 0,
+                                 opt_compress_level,0,
+                                 /* -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY, */
+                                 -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY,
+                                 password,crcFile, zip64);
+
+                if (err != ZIP_OK)
+                    printf("error in opening %s in zipfile\n",filenameinzip);
+                else
+                {
+                    fin = fopen64(filenameinzip,"rb");
+                    if (fin==NULL)
+                    {
+                        err=ZIP_ERRNO;
+                        printf("error in opening %s for reading\n",filenameinzip);
+                    }
+                }
+
+                if (err == ZIP_OK)
+                    do
+                    {
+                        err = ZIP_OK;
+                        size_read = (int)fread(buf,1,size_buf,fin);
+                        if (size_read < size_buf)
+                            if (feof(fin)==0)
+                        {
+                            printf("error in reading %s\n",filenameinzip);
+                            err = ZIP_ERRNO;
+                        }
+
+                        if (size_read>0)
+                        {
+                            err = zipWriteInFileInZip (zf,buf,size_read);
+                            if (err<0)
+                            {
+                                printf("error in writing %s in the zipfile\n",
+                                                 filenameinzip);
+                            }
+
+                        }
+                    } while ((err == ZIP_OK) && (size_read>0));
+
+                if (fin)
+                    fclose(fin);
+
+                if (err<0)
+                    err=ZIP_ERRNO;
+                else
+                {
+                    err = zipCloseFileInZip(zf);
+                    if (err!=ZIP_OK)
+                        printf("error in closing %s in the zipfile\n",
+                                    filenameinzip);
+                }
+            }
+        }
+        errclose = zipClose(zf,NULL);
+        if (errclose != ZIP_OK)
+            printf("error in closing %s\n",filename_try);
+    }
+    else
+    {
+       do_help();
+    }
+
+    free(buf);
+    return 0;
+}

contrib/minizip/mztools.c

@@ -0,0 +1,281 @@
+/*
+  Additional tools for Minizip
+  Code: Xavier Roche '2004
+  License: Same as ZLIB (www.gzip.org)
+*/
+
+/* Code */
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "zlib.h"
+#include "unzip.h"
+
+#define READ_8(adr)  ((unsigned char)*(adr))
+#define READ_16(adr) ( READ_8(adr) | (READ_8(adr+1) << 8) )
+#define READ_32(adr) ( READ_16(adr) | (READ_16((adr)+2) << 16) )
+
+#define WRITE_8(buff, n) do { \
+  *((unsigned char*)(buff)) = (unsigned char) ((n) & 0xff); \
+} while(0)
+#define WRITE_16(buff, n) do { \
+  WRITE_8((unsigned char*)(buff), n); \
+  WRITE_8(((unsigned char*)(buff)) + 1, (n) >> 8); \
+} while(0)
+#define WRITE_32(buff, n) do { \
+  WRITE_16((unsigned char*)(buff), (n) & 0xffff); \
+  WRITE_16((unsigned char*)(buff) + 2, (n) >> 16); \
+} while(0)
+
+extern int ZEXPORT unzRepair(file, fileOut, fileOutTmp, nRecovered, bytesRecovered)
+const char* file;
+const char* fileOut;
+const char* fileOutTmp;
+uLong* nRecovered;
+uLong* bytesRecovered;
+{
+  int err = Z_OK;
+  FILE* fpZip = fopen(file, "rb");
+  FILE* fpOut = fopen(fileOut, "wb");
+  FILE* fpOutCD = fopen(fileOutTmp, "wb");
+  if (fpZip != NULL &&  fpOut != NULL) {
+    int entries = 0;
+    uLong totalBytes = 0;
+    char header[30];
+    char filename[256];
+    char extra[1024];
+    int offset = 0;
+    int offsetCD = 0;
+    while ( fread(header, 1, 30, fpZip) == 30 ) {
+      int currentOffset = offset;
+
+      /* File entry */
+      if (READ_32(header) == 0x04034b50) {
+        unsigned int version = READ_16(header + 4);
+        unsigned int gpflag = READ_16(header + 6);
+        unsigned int method = READ_16(header + 8);
+        unsigned int filetime = READ_16(header + 10);
+        unsigned int filedate = READ_16(header + 12);
+        unsigned int crc = READ_32(header + 14); /* crc */
+        unsigned int cpsize = READ_32(header + 18); /* compressed size */
+        unsigned int uncpsize = READ_32(header + 22); /* uncompressed sz */
+        unsigned int fnsize = READ_16(header + 26); /* file name length */
+        unsigned int extsize = READ_16(header + 28); /* extra field length */
+        filename[0] = extra[0] = '\0';
+
+        /* Header */
+        if (fwrite(header, 1, 30, fpOut) == 30) {
+          offset += 30;
+        } else {
+          err = Z_ERRNO;
+          break;
+        }
+
+        /* Filename */
+        if (fnsize > 0) {
+          if (fread(filename, 1, fnsize, fpZip) == fnsize) {
+            if (fwrite(filename, 1, fnsize, fpOut) == fnsize) {
+              offset += fnsize;
+            } else {
+              err = Z_ERRNO;
+              break;
+            }
+          } else {
+            err = Z_ERRNO;
+            break;
+          }
+        } else {
+          err = Z_STREAM_ERROR;
+          break;
+        }
+
+        /* Extra field */
+        if (extsize > 0) {
+          if (fread(extra, 1, extsize, fpZip) == extsize) {
+            if (fwrite(extra, 1, extsize, fpOut) == extsize) {
+              offset += extsize;
+            } else {
+              err = Z_ERRNO;
+              break;
+            }
+          } else {
+            err = Z_ERRNO;
+            break;
+          }
+        }
+
+        /* Data */
+        {
+          int dataSize = cpsize;
+          if (dataSize == 0) {
+            dataSize = uncpsize;
+          }
+          if (dataSize > 0) {
+            char* data = malloc(dataSize);
+            if (data != NULL) {
+              if ((int)fread(data, 1, dataSize, fpZip) == dataSize) {
+                if ((int)fwrite(data, 1, dataSize, fpOut) == dataSize) {
+                  offset += dataSize;
+                  totalBytes += dataSize;
+                } else {
+                  err = Z_ERRNO;
+                }
+              } else {
+                err = Z_ERRNO;
+              }
+              free(data);
+              if (err != Z_OK) {
+                break;
+              }
+            } else {
+              err = Z_MEM_ERROR;
+              break;
+            }
+          }
+        }
+
+        /* Central directory entry */
+        {
+          char header[46];
+          char* comment = "";
+          int comsize = (int) strlen(comment);
+          WRITE_32(header, 0x02014b50);
+          WRITE_16(header + 4, version);
+          WRITE_16(header + 6, version);
+          WRITE_16(header + 8, gpflag);
+          WRITE_16(header + 10, method);
+          WRITE_16(header + 12, filetime);
+          WRITE_16(header + 14, filedate);
+          WRITE_32(header + 16, crc);
+          WRITE_32(header + 20, cpsize);
+          WRITE_32(header + 24, uncpsize);
+          WRITE_16(header + 28, fnsize);
+          WRITE_16(header + 30, extsize);
+          WRITE_16(header + 32, comsize);
+          WRITE_16(header + 34, 0);     /* disk # */
+          WRITE_16(header + 36, 0);     /* int attrb */
+          WRITE_32(header + 38, 0);     /* ext attrb */
+          WRITE_32(header + 42, currentOffset);
+          /* Header */
+          if (fwrite(header, 1, 46, fpOutCD) == 46) {
+            offsetCD += 46;
+
+            /* Filename */
+            if (fnsize > 0) {
+              if (fwrite(filename, 1, fnsize, fpOutCD) == fnsize) {
+                offsetCD += fnsize;
+              } else {
+                err = Z_ERRNO;
+                break;
+              }
+            } else {
+              err = Z_STREAM_ERROR;
+              break;
+            }
+
+            /* Extra field */
+            if (extsize > 0) {
+              if (fwrite(extra, 1, extsize, fpOutCD) == extsize) {
+                offsetCD += extsize;
+              } else {
+                err = Z_ERRNO;
+                break;
+              }
+            }
+
+            /* Comment field */
+            if (comsize > 0) {
+              if ((int)fwrite(comment, 1, comsize, fpOutCD) == comsize) {
+                offsetCD += comsize;
+              } else {
+                err = Z_ERRNO;
+                break;
+              }
+            }
+
+
+          } else {
+            err = Z_ERRNO;
+            break;
+          }
+        }
+
+        /* Success */
+        entries++;
+
+      } else {
+        break;
+      }
+    }
+
+    /* Final central directory  */
+    {
+      int entriesZip = entries;
+      char header[22];
+      char* comment = ""; // "ZIP File recovered by zlib/minizip/mztools";
+      int comsize = (int) strlen(comment);
+      if (entriesZip > 0xffff) {
+        entriesZip = 0xffff;
+      }
+      WRITE_32(header, 0x06054b50);
+      WRITE_16(header + 4, 0);    /* disk # */
+      WRITE_16(header + 6, 0);    /* disk # */
+      WRITE_16(header + 8, entriesZip);   /* hack */
+      WRITE_16(header + 10, entriesZip);  /* hack */
+      WRITE_32(header + 12, offsetCD);    /* size of CD */
+      WRITE_32(header + 16, offset);      /* offset to CD */
+      WRITE_16(header + 20, comsize);     /* comment */
+
+      /* Header */
+      if (fwrite(header, 1, 22, fpOutCD) == 22) {
+
+        /* Comment field */
+        if (comsize > 0) {
+          if ((int)fwrite(comment, 1, comsize, fpOutCD) != comsize) {
+            err = Z_ERRNO;
+          }
+        }
+
+      } else {
+        err = Z_ERRNO;
+      }
+    }
+
+    /* Final merge (file + central directory) */
+    fclose(fpOutCD);
+    if (err == Z_OK) {
+      fpOutCD = fopen(fileOutTmp, "rb");
+      if (fpOutCD != NULL) {
+        int nRead;
+        char buffer[8192];
+        while ( (nRead = (int)fread(buffer, 1, sizeof(buffer), fpOutCD)) > 0) {
+          if ((int)fwrite(buffer, 1, nRead, fpOut) != nRead) {
+            err = Z_ERRNO;
+            break;
+          }
+        }
+        fclose(fpOutCD);
+      }
+    }
+
+    /* Close */
+    fclose(fpZip);
+    fclose(fpOut);
+
+    /* Wipe temporary file */
+    (void)remove(fileOutTmp);
+
+    /* Number of recovered entries */
+    if (err == Z_OK) {
+      if (nRecovered != NULL) {
+        *nRecovered = entries;
+      }
+      if (bytesRecovered != NULL) {
+        *bytesRecovered = totalBytes;
+      }
+    }
+  } else {
+    err = Z_STREAM_ERROR;
+  }
+  return err;
+}

contrib/minizip/mztools.h

@@ -0,0 +1,31 @@
+/*
+  Additional tools for Minizip
+  Code: Xavier Roche '2004
+  License: Same as ZLIB (www.gzip.org)
+*/
+
+#ifndef _zip_tools_H
+#define _zip_tools_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef _ZLIB_H
+#include "zlib.h"
+#endif
+
+#include "unzip.h"
+
+/* Repair a ZIP file (missing central directory)
+   file: file to recover
+   fileOut: output file after recovery
+   fileOutTmp: temporary file name used for recovery
+*/
+extern int ZEXPORT unzRepair(const char* file,
+                             const char* fileOut,
+                             const char* fileOutTmp,
+                             uLong* nRecovered,
+                             uLong* bytesRecovered);
+
+#endif

contrib/minizip/unzip.h

@@ -0,0 +1,437 @@
+/* unzip.h -- IO for uncompress .zip files using zlib
+   Version 1.1, February 14h, 2010
+   part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
+
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+         Modifications of Unzip for Zip64
+         Copyright (C) 2007-2008 Even Rouault
+
+         Modifications for Zip64 support on both zip and unzip
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+
+         For more info read MiniZip_info.txt
+
+         ---------------------------------------------------------------------------------
+
+        Condition of use and distribution are the same than zlib :
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+  ---------------------------------------------------------------------------------
+
+        Changes
+
+        See header of unzip64.c
+
+*/
+
+#ifndef _unz64_H
+#define _unz64_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef _ZLIB_H
+#include "zlib.h"
+#endif
+
+#ifndef  _ZLIBIOAPI_H
+#include "ioapi.h"
+#endif
+
+#ifdef HAVE_BZIP2
+#include "bzlib.h"
+#endif
+
+#define Z_BZIP2ED 12
+
+#if defined(STRICTUNZIP) || defined(STRICTZIPUNZIP)
+/* like the STRICT of WIN32, we define a pointer that cannot be converted
+    from (void*) without cast */
+typedef struct TagunzFile__ { int unused; } unzFile__;
+typedef unzFile__ *unzFile;
+#else
+typedef voidp unzFile;
+#endif
+
+
+#define UNZ_OK                          (0)
+#define UNZ_END_OF_LIST_OF_FILE         (-100)
+#define UNZ_ERRNO                       (Z_ERRNO)
+#define UNZ_EOF                         (0)
+#define UNZ_PARAMERROR                  (-102)
+#define UNZ_BADZIPFILE                  (-103)
+#define UNZ_INTERNALERROR               (-104)
+#define UNZ_CRCERROR                    (-105)
+
+/* tm_unz contain date/time info */
+typedef struct tm_unz_s
+{
+    uInt tm_sec;            /* seconds after the minute - [0,59] */
+    uInt tm_min;            /* minutes after the hour - [0,59] */
+    uInt tm_hour;           /* hours since midnight - [0,23] */
+    uInt tm_mday;           /* day of the month - [1,31] */
+    uInt tm_mon;            /* months since January - [0,11] */
+    uInt tm_year;           /* years - [1980..2044] */
+} tm_unz;
+
+/* unz_global_info structure contain global data about the ZIPfile
+   These data comes from the end of central dir */
+typedef struct unz_global_info64_s
+{
+    ZPOS64_T number_entry;         /* total number of entries in
+                                     the central dir on this disk */
+    uLong size_comment;         /* size of the global comment of the zipfile */
+} unz_global_info64;
+
+typedef struct unz_global_info_s
+{
+    uLong number_entry;         /* total number of entries in
+                                     the central dir on this disk */
+    uLong size_comment;         /* size of the global comment of the zipfile */
+} unz_global_info;
+
+/* unz_file_info contain information about a file in the zipfile */
+typedef struct unz_file_info64_s
+{
+    uLong version;              /* version made by                 2 bytes */
+    uLong version_needed;       /* version needed to extract       2 bytes */
+    uLong flag;                 /* general purpose bit flag        2 bytes */
+    uLong compression_method;   /* compression method              2 bytes */
+    uLong dosDate;              /* last mod file date in Dos fmt   4 bytes */
+    uLong crc;                  /* crc-32                          4 bytes */
+    ZPOS64_T compressed_size;   /* compressed size                 8 bytes */
+    ZPOS64_T uncompressed_size; /* uncompressed size               8 bytes */
+    uLong size_filename;        /* filename length                 2 bytes */
+    uLong size_file_extra;      /* extra field length              2 bytes */
+    uLong size_file_comment;    /* file comment length             2 bytes */
+
+    uLong disk_num_start;       /* disk number start               2 bytes */
+    uLong internal_fa;          /* internal file attributes        2 bytes */
+    uLong external_fa;          /* external file attributes        4 bytes */
+
+    tm_unz tmu_date;
+} unz_file_info64;
+
+typedef struct unz_file_info_s
+{
+    uLong version;              /* version made by                 2 bytes */
+    uLong version_needed;       /* version needed to extract       2 bytes */
+    uLong flag;                 /* general purpose bit flag        2 bytes */
+    uLong compression_method;   /* compression method              2 bytes */
+    uLong dosDate;              /* last mod file date in Dos fmt   4 bytes */
+    uLong crc;                  /* crc-32                          4 bytes */
+    uLong compressed_size;      /* compressed size                 4 bytes */
+    uLong uncompressed_size;    /* uncompressed size               4 bytes */
+    uLong size_filename;        /* filename length                 2 bytes */
+    uLong size_file_extra;      /* extra field length              2 bytes */
+    uLong size_file_comment;    /* file comment length             2 bytes */
+
+    uLong disk_num_start;       /* disk number start               2 bytes */
+    uLong internal_fa;          /* internal file attributes        2 bytes */
+    uLong external_fa;          /* external file attributes        4 bytes */
+
+    tm_unz tmu_date;
+} unz_file_info;
+
+extern int ZEXPORT unzStringFileNameCompare OF ((const char* fileName1,
+                                                 const char* fileName2,
+                                                 int iCaseSensitivity));
+/*
+   Compare two filename (fileName1,fileName2).
+   If iCaseSenisivity = 1, comparision is case sensitivity (like strcmp)
+   If iCaseSenisivity = 2, comparision is not case sensitivity (like strcmpi
+                                or strcasecmp)
+   If iCaseSenisivity = 0, case sensitivity is defaut of your operating system
+    (like 1 on Unix, 2 on Windows)
+*/
+
+
+extern unzFile ZEXPORT unzOpen OF((const char *path));
+extern unzFile ZEXPORT unzOpen64 OF((const void *path));
+/*
+  Open a Zip file. path contain the full pathname (by example,
+     on a Windows XP computer "c:\\zlib\\zlib113.zip" or on an Unix computer
+     "zlib/zlib113.zip".
+     If the zipfile cannot be opened (file don't exist or in not valid), the
+       return value is NULL.
+     Else, the return value is a unzFile Handle, usable with other function
+       of this unzip package.
+     the "64" function take a const void* pointer, because the path is just the
+       value passed to the open64_file_func callback.
+     Under Windows, if UNICODE is defined, using fill_fopen64_filefunc, the path
+       is a pointer to a wide unicode string (LPCTSTR is LPCWSTR), so const char*
+       does not describe the reality
+*/
+
+
+extern unzFile ZEXPORT unzOpen2 OF((const char *path,
+                                    zlib_filefunc_def* pzlib_filefunc_def));
+/*
+   Open a Zip file, like unzOpen, but provide a set of file low level API
+      for read/write the zip file (see ioapi.h)
+*/
+
+extern unzFile ZEXPORT unzOpen2_64 OF((const void *path,
+                                    zlib_filefunc64_def* pzlib_filefunc_def));
+/*
+   Open a Zip file, like unz64Open, but provide a set of file low level API
+      for read/write the zip file (see ioapi.h)
+*/
+
+extern int ZEXPORT unzClose OF((unzFile file));
+/*
+  Close a ZipFile opened with unzipOpen.
+  If there is files inside the .Zip opened with unzOpenCurrentFile (see later),
+    these files MUST be closed with unzipCloseCurrentFile before call unzipClose.
+  return UNZ_OK if there is no problem. */
+
+extern int ZEXPORT unzGetGlobalInfo OF((unzFile file,
+                                        unz_global_info *pglobal_info));
+
+extern int ZEXPORT unzGetGlobalInfo64 OF((unzFile file,
+                                        unz_global_info64 *pglobal_info));
+/*
+  Write info about the ZipFile in the *pglobal_info structure.
+  No preparation of the structure is needed
+  return UNZ_OK if there is no problem. */
+
+
+extern int ZEXPORT unzGetGlobalComment OF((unzFile file,
+                                           char *szComment,
+                                           uLong uSizeBuf));
+/*
+  Get the global comment string of the ZipFile, in the szComment buffer.
+  uSizeBuf is the size of the szComment buffer.
+  return the number of byte copied or an error code <0
+*/
+
+
+/***************************************************************************/
+/* Unzip package allow you browse the directory of the zipfile */
+
+extern int ZEXPORT unzGoToFirstFile OF((unzFile file));
+/*
+  Set the current file of the zipfile to the first file.
+  return UNZ_OK if there is no problem
+*/
+
+extern int ZEXPORT unzGoToNextFile OF((unzFile file));
+/*
+  Set the current file of the zipfile to the next file.
+  return UNZ_OK if there is no problem
+  return UNZ_END_OF_LIST_OF_FILE if the actual file was the latest.
+*/
+
+extern int ZEXPORT unzLocateFile OF((unzFile file,
+                     const char *szFileName,
+                     int iCaseSensitivity));
+/*
+  Try locate the file szFileName in the zipfile.
+  For the iCaseSensitivity signification, see unzStringFileNameCompare
+
+  return value :
+  UNZ_OK if the file is found. It becomes the current file.
+  UNZ_END_OF_LIST_OF_FILE if the file is not found
+*/
+
+
+/* ****************************************** */
+/* Ryan supplied functions */
+/* unz_file_info contain information about a file in the zipfile */
+typedef struct unz_file_pos_s
+{
+    uLong pos_in_zip_directory;   /* offset in zip file directory */
+    uLong num_of_file;            /* # of file */
+} unz_file_pos;
+
+extern int ZEXPORT unzGetFilePos(
+    unzFile file,
+    unz_file_pos* file_pos);
+
+extern int ZEXPORT unzGoToFilePos(
+    unzFile file,
+    unz_file_pos* file_pos);
+
+typedef struct unz64_file_pos_s
+{
+    ZPOS64_T pos_in_zip_directory;   /* offset in zip file directory */
+    ZPOS64_T num_of_file;            /* # of file */
+} unz64_file_pos;
+
+extern int ZEXPORT unzGetFilePos64(
+    unzFile file,
+    unz64_file_pos* file_pos);
+
+extern int ZEXPORT unzGoToFilePos64(
+    unzFile file,
+    const unz64_file_pos* file_pos);
+
+/* ****************************************** */
+
+extern int ZEXPORT unzGetCurrentFileInfo64 OF((unzFile file,
+                         unz_file_info64 *pfile_info,
+                         char *szFileName,
+                         uLong fileNameBufferSize,
+                         void *extraField,
+                         uLong extraFieldBufferSize,
+                         char *szComment,
+                         uLong commentBufferSize));
+
+extern int ZEXPORT unzGetCurrentFileInfo OF((unzFile file,
+                         unz_file_info *pfile_info,
+                         char *szFileName,
+                         uLong fileNameBufferSize,
+                         void *extraField,
+                         uLong extraFieldBufferSize,
+                         char *szComment,
+                         uLong commentBufferSize));
+/*
+  Get Info about the current file
+  if pfile_info!=NULL, the *pfile_info structure will contain somes info about
+        the current file
+  if szFileName!=NULL, the filemane string will be copied in szFileName
+            (fileNameBufferSize is the size of the buffer)
+  if extraField!=NULL, the extra field information will be copied in extraField
+            (extraFieldBufferSize is the size of the buffer).
+            This is the Central-header version of the extra field
+  if szComment!=NULL, the comment string of the file will be copied in szComment
+            (commentBufferSize is the size of the buffer)
+*/
+
+
+/** Addition for GDAL : START */
+
+extern ZPOS64_T ZEXPORT unzGetCurrentFileZStreamPos64 OF((unzFile file));
+
+/** Addition for GDAL : END */
+
+
+/***************************************************************************/
+/* for reading the content of the current zipfile, you can open it, read data
+   from it, and close it (you can close it before reading all the file)
+   */
+
+extern int ZEXPORT unzOpenCurrentFile OF((unzFile file));
+/*
+  Open for reading data the current file in the zipfile.
+  If there is no error, the return value is UNZ_OK.
+*/
+
+extern int ZEXPORT unzOpenCurrentFilePassword OF((unzFile file,
+                                                  const char* password));
+/*
+  Open for reading data the current file in the zipfile.
+  password is a crypting password
+  If there is no error, the return value is UNZ_OK.
+*/
+
+extern int ZEXPORT unzOpenCurrentFile2 OF((unzFile file,
+                                           int* method,
+                                           int* level,
+                                           int raw));
+/*
+  Same than unzOpenCurrentFile, but open for read raw the file (not uncompress)
+    if raw==1
+  *method will receive method of compression, *level will receive level of
+     compression
+  note : you can set level parameter as NULL (if you did not want known level,
+         but you CANNOT set method parameter as NULL
+*/
+
+extern int ZEXPORT unzOpenCurrentFile3 OF((unzFile file,
+                                           int* method,
+                                           int* level,
+                                           int raw,
+                                           const char* password));
+/*
+  Same than unzOpenCurrentFile, but open for read raw the file (not uncompress)
+    if raw==1
+  *method will receive method of compression, *level will receive level of
+     compression
+  note : you can set level parameter as NULL (if you did not want known level,
+         but you CANNOT set method parameter as NULL
+*/
+
+
+extern int ZEXPORT unzCloseCurrentFile OF((unzFile file));
+/*
+  Close the file in zip opened with unzOpenCurrentFile
+  Return UNZ_CRCERROR if all the file was read but the CRC is not good
+*/
+
+extern int ZEXPORT unzReadCurrentFile OF((unzFile file,
+                      voidp buf,
+                      unsigned len));
+/*
+  Read bytes from the current file (opened by unzOpenCurrentFile)
+  buf contain buffer where data must be copied
+  len the size of buf.
+
+  return the number of byte copied if somes bytes are copied
+  return 0 if the end of file was reached
+  return <0 with error code if there is an error
+    (UNZ_ERRNO for IO error, or zLib error for uncompress error)
+*/
+
+extern z_off_t ZEXPORT unztell OF((unzFile file));
+
+extern ZPOS64_T ZEXPORT unztell64 OF((unzFile file));
+/*
+  Give the current position in uncompressed data
+*/
+
+extern int ZEXPORT unzeof OF((unzFile file));
+/*
+  return 1 if the end of file was reached, 0 elsewhere
+*/
+
+extern int ZEXPORT unzGetLocalExtrafield OF((unzFile file,
+                                             voidp buf,
+                                             unsigned len));
+/*
+  Read extra field from the current file (opened by unzOpenCurrentFile)
+  This is the local-header version of the extra field (sometimes, there is
+    more info in the local-header version than in the central-header)
+
+  if buf==NULL, it return the size of the local extra field
+
+  if buf!=NULL, len is the size of the buffer, the extra header is copied in
+    buf.
+  the return value is the number of bytes copied in buf, or (if <0)
+    the error code
+*/
+
+/***************************************************************************/
+
+/* Get the current file offset */
+extern ZPOS64_T ZEXPORT unzGetOffset64 (unzFile file);
+extern uLong ZEXPORT unzGetOffset (unzFile file);
+
+/* Set the current file offset */
+extern int ZEXPORT unzSetOffset64 (unzFile file, ZPOS64_T pos);
+extern int ZEXPORT unzSetOffset (unzFile file, uLong pos);
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _unz64_H */

contrib/minizip/zip.h

@@ -0,0 +1,362 @@
+/* zip.h -- IO on .zip files using zlib
+   Version 1.1, February 14h, 2010
+   part of the MiniZip project - ( http://www.winimage.com/zLibDll/minizip.html )
+
+         Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http://www.winimage.com/zLibDll/minizip.html )
+
+         Modifications for Zip64 support
+         Copyright (C) 2009-2010 Mathias Svensson ( http://result42.com )
+
+         For more info read MiniZip_info.txt
+
+         ---------------------------------------------------------------------------
+
+   Condition of use and distribution are the same than zlib :
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+        ---------------------------------------------------------------------------
+
+        Changes
+
+        See header of zip.h
+
+*/
+
+#ifndef _zip12_H
+#define _zip12_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+//#define HAVE_BZIP2
+
+#ifndef _ZLIB_H
+#include "zlib.h"
+#endif
+
+#ifndef _ZLIBIOAPI_H
+#include "ioapi.h"
+#endif
+
+#ifdef HAVE_BZIP2
+#include "bzlib.h"
+#endif
+
+#define Z_BZIP2ED 12
+
+#if defined(STRICTZIP) || defined(STRICTZIPUNZIP)
+/* like the STRICT of WIN32, we define a pointer that cannot be converted
+    from (void*) without cast */
+typedef struct TagzipFile__ { int unused; } zipFile__;
+typedef zipFile__ *zipFile;
+#else
+typedef voidp zipFile;
+#endif
+
+#define ZIP_OK                          (0)
+#define ZIP_EOF                         (0)
+#define ZIP_ERRNO                       (Z_ERRNO)
+#define ZIP_PARAMERROR                  (-102)
+#define ZIP_BADZIPFILE                  (-103)
+#define ZIP_INTERNALERROR               (-104)
+
+#ifndef DEF_MEM_LEVEL
+#  if MAX_MEM_LEVEL >= 8
+#    define DEF_MEM_LEVEL 8
+#  else
+#    define DEF_MEM_LEVEL  MAX_MEM_LEVEL
+#  endif
+#endif
+/* default memLevel */
+
+/* tm_zip contain date/time info */
+typedef struct tm_zip_s
+{
+    uInt tm_sec;            /* seconds after the minute - [0,59] */
+    uInt tm_min;            /* minutes after the hour - [0,59] */
+    uInt tm_hour;           /* hours since midnight - [0,23] */
+    uInt tm_mday;           /* day of the month - [1,31] */
+    uInt tm_mon;            /* months since January - [0,11] */
+    uInt tm_year;           /* years - [1980..2044] */
+} tm_zip;
+
+typedef struct
+{
+    tm_zip      tmz_date;       /* date in understandable format           */
+    uLong       dosDate;       /* if dos_date == 0, tmu_date is used      */
+/*    uLong       flag;        */   /* general purpose bit flag        2 bytes */
+
+    uLong       internal_fa;    /* internal file attributes        2 bytes */
+    uLong       external_fa;    /* external file attributes        4 bytes */
+} zip_fileinfo;
+
+typedef const char* zipcharpc;
+
+
+#define APPEND_STATUS_CREATE        (0)
+#define APPEND_STATUS_CREATEAFTER   (1)
+#define APPEND_STATUS_ADDINZIP      (2)
+
+extern zipFile ZEXPORT zipOpen OF((const char *pathname, int append));
+extern zipFile ZEXPORT zipOpen64 OF((const void *pathname, int append));
+/*
+  Create a zipfile.
+     pathname contain on Windows XP a filename like "c:\\zlib\\zlib113.zip" or on
+       an Unix computer "zlib/zlib113.zip".
+     if the file pathname exist and append==APPEND_STATUS_CREATEAFTER, the zip
+       will be created at the end of the file.
+         (useful if the file contain a self extractor code)
+     if the file pathname exist and append==APPEND_STATUS_ADDINZIP, we will
+       add files in existing zip (be sure you don't add file that doesn't exist)
+     If the zipfile cannot be opened, the return value is NULL.
+     Else, the return value is a zipFile Handle, usable with other function
+       of this zip package.
+*/
+
+/* Note : there is no delete function into a zipfile.
+   If you want delete file into a zipfile, you must open a zipfile, and create another
+   Of couse, you can use RAW reading and writing to copy the file you did not want delte
+*/
+
+extern zipFile ZEXPORT zipOpen2 OF((const char *pathname,
+                                   int append,
+                                   zipcharpc* globalcomment,
+                                   zlib_filefunc_def* pzlib_filefunc_def));
+
+extern zipFile ZEXPORT zipOpen2_64 OF((const void *pathname,
+                                   int append,
+                                   zipcharpc* globalcomment,
+                                   zlib_filefunc64_def* pzlib_filefunc_def));
+
+extern int ZEXPORT zipOpenNewFileInZip OF((zipFile file,
+                       const char* filename,
+                       const zip_fileinfo* zipfi,
+                       const void* extrafield_local,
+                       uInt size_extrafield_local,
+                       const void* extrafield_global,
+                       uInt size_extrafield_global,
+                       const char* comment,
+                       int method,
+                       int level));
+
+extern int ZEXPORT zipOpenNewFileInZip64 OF((zipFile file,
+                       const char* filename,
+                       const zip_fileinfo* zipfi,
+                       const void* extrafield_local,
+                       uInt size_extrafield_local,
+                       const void* extrafield_global,
+                       uInt size_extrafield_global,
+                       const char* comment,
+                       int method,
+                       int level,
+                       int zip64));
+
+/*
+  Open a file in the ZIP for writing.
+  filename : the filename in zip (if NULL, '-' without quote will be used
+  *zipfi contain supplemental information
+  if extrafield_local!=NULL and size_extrafield_local>0, extrafield_local
+    contains the extrafield data the the local header
+  if extrafield_global!=NULL and size_extrafield_global>0, extrafield_global
+    contains the extrafield data the the local header
+  if comment != NULL, comment contain the comment string
+  method contain the compression method (0 for store, Z_DEFLATED for deflate)
+  level contain the level of compression (can be Z_DEFAULT_COMPRESSION)
+  zip64 is set to 1 if a zip64 extended information block should be added to the local file header.
+                    this MUST be '1' if the uncompressed size is >= 0xffffffff.
+
+*/
+
+
+extern int ZEXPORT zipOpenNewFileInZip2 OF((zipFile file,
+                                            const char* filename,
+                                            const zip_fileinfo* zipfi,
+                                            const void* extrafield_local,
+                                            uInt size_extrafield_local,
+                                            const void* extrafield_global,
+                                            uInt size_extrafield_global,
+                                            const char* comment,
+                                            int method,
+                                            int level,
+                                            int raw));
+
+
+extern int ZEXPORT zipOpenNewFileInZip2_64 OF((zipFile file,
+                                            const char* filename,
+                                            const zip_fileinfo* zipfi,
+                                            const void* extrafield_local,
+                                            uInt size_extrafield_local,
+                                            const void* extrafield_global,
+                                            uInt size_extrafield_global,
+                                            const char* comment,
+                                            int method,
+                                            int level,
+                                            int raw,
+                                            int zip64));
+/*
+  Same than zipOpenNewFileInZip, except if raw=1, we write raw file
+ */
+
+extern int ZEXPORT zipOpenNewFileInZip3 OF((zipFile file,
+                                            const char* filename,
+                                            const zip_fileinfo* zipfi,
+                                            const void* extrafield_local,
+                                            uInt size_extrafield_local,
+                                            const void* extrafield_global,
+                                            uInt size_extrafield_global,
+                                            const char* comment,
+                                            int method,
+                                            int level,
+                                            int raw,
+                                            int windowBits,
+                                            int memLevel,
+                                            int strategy,
+                                            const char* password,
+                                            uLong crcForCrypting));
+
+extern int ZEXPORT zipOpenNewFileInZip3_64 OF((zipFile file,
+                                            const char* filename,
+                                            const zip_fileinfo* zipfi,
+                                            const void* extrafield_local,
+                                            uInt size_extrafield_local,
+                                            const void* extrafield_global,
+                                            uInt size_extrafield_global,
+                                            const char* comment,
+                                            int method,
+                                            int level,
+                                            int raw,
+                                            int windowBits,
+                                            int memLevel,
+                                            int strategy,
+                                            const char* password,
+                                            uLong crcForCrypting,
+                                            int zip64
+                                            ));
+
+/*
+  Same than zipOpenNewFileInZip2, except
+    windowBits,memLevel,,strategy : see parameter strategy in deflateInit2
+    password : crypting password (NULL for no crypting)
+    crcForCrypting : crc of file to compress (needed for crypting)
+ */
+
+extern int ZEXPORT zipOpenNewFileInZip4 OF((zipFile file,
+                                            const char* filename,
+                                            const zip_fileinfo* zipfi,
+                                            const void* extrafield_local,
+                                            uInt size_extrafield_local,
+                                            const void* extrafield_global,
+                                            uInt size_extrafield_global,
+                                            const char* comment,
+                                            int method,
+                                            int level,
+                                            int raw,
+                                            int windowBits,
+                                            int memLevel,
+                                            int strategy,
+                                            const char* password,
+                                            uLong crcForCrypting,
+                                            uLong versionMadeBy,
+                                            uLong flagBase
+                                            ));
+
+
+extern int ZEXPORT zipOpenNewFileInZip4_64 OF((zipFile file,
+                                            const char* filename,
+                                            const zip_fileinfo* zipfi,
+                                            const void* extrafield_local,
+                                            uInt size_extrafield_local,
+                                            const void* extrafield_global,
+                                            uInt size_extrafield_global,
+                                            const char* comment,
+                                            int method,
+                                            int level,
+                                            int raw,
+                                            int windowBits,
+                                            int memLevel,
+                                            int strategy,
+                                            const char* password,
+                                            uLong crcForCrypting,
+                                            uLong versionMadeBy,
+                                            uLong flagBase,
+                                            int zip64
+                                            ));
+/*
+  Same than zipOpenNewFileInZip4, except
+    versionMadeBy : value for Version made by field
+    flag : value for flag field (compression level info will be added)
+ */
+
+
+extern int ZEXPORT zipWriteInFileInZip OF((zipFile file,
+                       const void* buf,
+                       unsigned len));
+/*
+  Write data in the zipfile
+*/
+
+extern int ZEXPORT zipCloseFileInZip OF((zipFile file));
+/*
+  Close the current file in the zipfile
+*/
+
+extern int ZEXPORT zipCloseFileInZipRaw OF((zipFile file,
+                                            uLong uncompressed_size,
+                                            uLong crc32));
+
+extern int ZEXPORT zipCloseFileInZipRaw64 OF((zipFile file,
+                                            ZPOS64_T uncompressed_size,
+                                            uLong crc32));
+
+/*
+  Close the current file in the zipfile, for file opened with
+    parameter raw=1 in zipOpenNewFileInZip2
+  uncompressed_size and crc32 are value for the uncompressed size
+*/
+
+extern int ZEXPORT zipClose OF((zipFile file,
+                const char* global_comment));
+/*
+  Close the zipfile
+*/
+
+
+extern int ZEXPORT zipRemoveExtraInfoBlock OF((char* pData, int* dataLen, short sHeader));
+/*
+  zipRemoveExtraInfoBlock -  Added by Mathias Svensson
+
+  Remove extra information block from a extra information data for the local file header or central directory header
+
+  It is needed to remove ZIP64 extra information blocks when before data is written if using RAW mode.
+
+  0x0001 is the signature header for the ZIP64 extra information blocks
+
+  usage.
+                        Remove ZIP64 Extra information from a central director extra field data
+              zipRemoveExtraInfoBlock(pCenDirExtraFieldData, &nCenDirExtraFieldDataLen, 0x0001);
+
+                        Remove ZIP64 Extra information from a Local File Header extra field data
+        zipRemoveExtraInfoBlock(pLocalHeaderExtraFieldData, &nLocalHeaderExtraFieldDataLen, 0x0001);
+*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _zip64_H */

contrib/pascal/example.pas

@@ -0,0 +1,599 @@
+(* example.c -- usage example of the zlib compression library
+ * Copyright (C) 1995-2003 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Pascal translation
+ * Copyright (C) 1998 by Jacques Nomssi Nzali.
+ * For conditions of distribution and use, see copyright notice in readme.txt
+ *
+ * Adaptation to the zlibpas interface
+ * Copyright (C) 2003 by Cosmin Truta.
+ * For conditions of distribution and use, see copyright notice in readme.txt
+ *)
+
+program example;
+
+{$DEFINE TEST_COMPRESS}
+{DO NOT $DEFINE TEST_GZIO}
+{$DEFINE TEST_DEFLATE}
+{$DEFINE TEST_INFLATE}
+{$DEFINE TEST_FLUSH}
+{$DEFINE TEST_SYNC}
+{$DEFINE TEST_DICT}
+
+uses SysUtils, zlibpas;
+
+const TESTFILE = 'foo.gz';
+
+(* "hello world" would be more standard, but the repeated "hello"
+ * stresses the compression code better, sorry...
+ *)
+const hello: PChar = 'hello, hello!';
+
+const dictionary: PChar = 'hello';
+
+var dictId: LongInt; (* Adler32 value of the dictionary *)
+
+procedure CHECK_ERR(err: Integer; msg: String);
+begin
+  if err <> Z_OK then
+  begin
+    WriteLn(msg, ' error: ', err);
+    Halt(1);
+  end;
+end;
+
+procedure EXIT_ERR(const msg: String);
+begin
+  WriteLn('Error: ', msg);
+  Halt(1);
+end;
+
+(* ===========================================================================
+ * Test compress and uncompress
+ *)
+{$IFDEF TEST_COMPRESS}
+procedure test_compress(compr: Pointer; comprLen: LongInt;
+                        uncompr: Pointer; uncomprLen: LongInt);
+var err: Integer;
+    len: LongInt;
+begin
+  len := StrLen(hello)+1;
+
+  err := compress(compr, comprLen, hello, len);
+  CHECK_ERR(err, 'compress');
+
+  StrCopy(PChar(uncompr), 'garbage');
+
+  err := uncompress(uncompr, uncomprLen, compr, comprLen);
+  CHECK_ERR(err, 'uncompress');
+
+  if StrComp(PChar(uncompr), hello) <> 0 then
+    EXIT_ERR('bad uncompress')
+  else
+    WriteLn('uncompress(): ', PChar(uncompr));
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test read/write of .gz files
+ *)
+{$IFDEF TEST_GZIO}
+procedure test_gzio(const fname: PChar; (* compressed file name *)
+                    uncompr: Pointer;
+                    uncomprLen: LongInt);
+var err: Integer;
+    len: Integer;
+    zfile: gzFile;
+    pos: LongInt;
+begin
+  len := StrLen(hello)+1;
+
+  zfile := gzopen(fname, 'wb');
+  if zfile = NIL then
+  begin
+    WriteLn('gzopen error');
+    Halt(1);
+  end;
+  gzputc(zfile, 'h');
+  if gzputs(zfile, 'ello') <> 4 then
+  begin
+    WriteLn('gzputs err: ', gzerror(zfile, err));
+    Halt(1);
+  end;
+  {$IFDEF GZ_FORMAT_STRING}
+  if gzprintf(zfile, ', %s!', 'hello') <> 8 then
+  begin
+    WriteLn('gzprintf err: ', gzerror(zfile, err));
+    Halt(1);
+  end;
+  {$ELSE}
+  if gzputs(zfile, ', hello!') <> 8 then
+  begin
+    WriteLn('gzputs err: ', gzerror(zfile, err));
+    Halt(1);
+  end;
+  {$ENDIF}
+  gzseek(zfile, 1, SEEK_CUR); (* add one zero byte *)
+  gzclose(zfile);
+
+  zfile := gzopen(fname, 'rb');
+  if zfile = NIL then
+  begin
+    WriteLn('gzopen error');
+    Halt(1);
+  end;
+
+  StrCopy(PChar(uncompr), 'garbage');
+
+  if gzread(zfile, uncompr, uncomprLen) <> len then
+  begin
+    WriteLn('gzread err: ', gzerror(zfile, err));
+    Halt(1);
+  end;
+  if StrComp(PChar(uncompr), hello) <> 0 then
+  begin
+    WriteLn('bad gzread: ', PChar(uncompr));
+    Halt(1);
+  end
+  else
+    WriteLn('gzread(): ', PChar(uncompr));
+
+  pos := gzseek(zfile, -8, SEEK_CUR);
+  if (pos <> 6) or (gztell(zfile) <> pos) then
+  begin
+    WriteLn('gzseek error, pos=', pos, ', gztell=', gztell(zfile));
+    Halt(1);
+  end;
+
+  if gzgetc(zfile) <> ' ' then
+  begin
+    WriteLn('gzgetc error');
+    Halt(1);
+  end;
+
+  if gzungetc(' ', zfile) <> ' ' then
+  begin
+    WriteLn('gzungetc error');
+    Halt(1);
+  end;
+
+  gzgets(zfile, PChar(uncompr), uncomprLen);
+  uncomprLen := StrLen(PChar(uncompr));
+  if uncomprLen <> 7 then (* " hello!" *)
+  begin
+    WriteLn('gzgets err after gzseek: ', gzerror(zfile, err));
+    Halt(1);
+  end;
+  if StrComp(PChar(uncompr), hello + 6) <> 0 then
+  begin
+    WriteLn('bad gzgets after gzseek');
+    Halt(1);
+  end
+  else
+    WriteLn('gzgets() after gzseek: ', PChar(uncompr));
+
+  gzclose(zfile);
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test deflate with small buffers
+ *)
+{$IFDEF TEST_DEFLATE}
+procedure test_deflate(compr: Pointer; comprLen: LongInt);
+var c_stream: z_stream; (* compression stream *)
+    err: Integer;
+    len: LongInt;
+begin
+  len := StrLen(hello)+1;
+
+  c_stream.zalloc := NIL;
+  c_stream.zfree := NIL;
+  c_stream.opaque := NIL;
+
+  err := deflateInit(c_stream, Z_DEFAULT_COMPRESSION);
+  CHECK_ERR(err, 'deflateInit');
+
+  c_stream.next_in := hello;
+  c_stream.next_out := compr;
+
+  while (c_stream.total_in <> len) and
+        (c_stream.total_out < comprLen) do
+  begin
+    c_stream.avail_out := 1; { force small buffers }
+    c_stream.avail_in := 1;
+    err := deflate(c_stream, Z_NO_FLUSH);
+    CHECK_ERR(err, 'deflate');
+  end;
+
+  (* Finish the stream, still forcing small buffers: *)
+  while TRUE do
+  begin
+    c_stream.avail_out := 1;
+    err := deflate(c_stream, Z_FINISH);
+    if err = Z_STREAM_END then
+      break;
+    CHECK_ERR(err, 'deflate');
+  end;
+
+  err := deflateEnd(c_stream);
+  CHECK_ERR(err, 'deflateEnd');
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test inflate with small buffers
+ *)
+{$IFDEF TEST_INFLATE}
+procedure test_inflate(compr: Pointer; comprLen : LongInt;
+                       uncompr: Pointer; uncomprLen : LongInt);
+var err: Integer;
+    d_stream: z_stream; (* decompression stream *)
+begin
+  StrCopy(PChar(uncompr), 'garbage');
+
+  d_stream.zalloc := NIL;
+  d_stream.zfree := NIL;
+  d_stream.opaque := NIL;
+
+  d_stream.next_in := compr;
+  d_stream.avail_in := 0;
+  d_stream.next_out := uncompr;
+
+  err := inflateInit(d_stream);
+  CHECK_ERR(err, 'inflateInit');
+
+  while (d_stream.total_out < uncomprLen) and
+        (d_stream.total_in < comprLen) do
+  begin
+    d_stream.avail_out := 1; (* force small buffers *)
+    d_stream.avail_in := 1;
+    err := inflate(d_stream, Z_NO_FLUSH);
+    if err = Z_STREAM_END then
+      break;
+    CHECK_ERR(err, 'inflate');
+  end;
+
+  err := inflateEnd(d_stream);
+  CHECK_ERR(err, 'inflateEnd');
+
+  if StrComp(PChar(uncompr), hello) <> 0 then
+    EXIT_ERR('bad inflate')
+  else
+    WriteLn('inflate(): ', PChar(uncompr));
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test deflate with large buffers and dynamic change of compression level
+ *)
+{$IFDEF TEST_DEFLATE}
+procedure test_large_deflate(compr: Pointer; comprLen: LongInt;
+                             uncompr: Pointer; uncomprLen: LongInt);
+var c_stream: z_stream; (* compression stream *)
+    err: Integer;
+begin
+  c_stream.zalloc := NIL;
+  c_stream.zfree := NIL;
+  c_stream.opaque := NIL;
+
+  err := deflateInit(c_stream, Z_BEST_SPEED);
+  CHECK_ERR(err, 'deflateInit');
+
+  c_stream.next_out := compr;
+  c_stream.avail_out := Integer(comprLen);
+
+  (* At this point, uncompr is still mostly zeroes, so it should compress
+   * very well:
+   *)
+  c_stream.next_in := uncompr;
+  c_stream.avail_in := Integer(uncomprLen);
+  err := deflate(c_stream, Z_NO_FLUSH);
+  CHECK_ERR(err, 'deflate');
+  if c_stream.avail_in <> 0 then
+    EXIT_ERR('deflate not greedy');
+
+  (* Feed in already compressed data and switch to no compression: *)
+  deflateParams(c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY);
+  c_stream.next_in := compr;
+  c_stream.avail_in := Integer(comprLen div 2);
+  err := deflate(c_stream, Z_NO_FLUSH);
+  CHECK_ERR(err, 'deflate');
+
+  (* Switch back to compressing mode: *)
+  deflateParams(c_stream, Z_BEST_COMPRESSION, Z_FILTERED);
+  c_stream.next_in := uncompr;
+  c_stream.avail_in := Integer(uncomprLen);
+  err := deflate(c_stream, Z_NO_FLUSH);
+  CHECK_ERR(err, 'deflate');
+
+  err := deflate(c_stream, Z_FINISH);
+  if err <> Z_STREAM_END then
+    EXIT_ERR('deflate should report Z_STREAM_END');
+
+  err := deflateEnd(c_stream);
+  CHECK_ERR(err, 'deflateEnd');
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test inflate with large buffers
+ *)
+{$IFDEF TEST_INFLATE}
+procedure test_large_inflate(compr: Pointer; comprLen: LongInt;
+                             uncompr: Pointer; uncomprLen: LongInt);
+var err: Integer;
+    d_stream: z_stream; (* decompression stream *)
+begin
+  StrCopy(PChar(uncompr), 'garbage');
+
+  d_stream.zalloc := NIL;
+  d_stream.zfree := NIL;
+  d_stream.opaque := NIL;
+
+  d_stream.next_in := compr;
+  d_stream.avail_in := Integer(comprLen);
+
+  err := inflateInit(d_stream);
+  CHECK_ERR(err, 'inflateInit');
+
+  while TRUE do
+  begin
+    d_stream.next_out := uncompr;            (* discard the output *)
+    d_stream.avail_out := Integer(uncomprLen);
+    err := inflate(d_stream, Z_NO_FLUSH);
+    if err = Z_STREAM_END then
+      break;
+    CHECK_ERR(err, 'large inflate');
+  end;
+
+  err := inflateEnd(d_stream);
+  CHECK_ERR(err, 'inflateEnd');
+
+  if d_stream.total_out <> 2 * uncomprLen + comprLen div 2 then
+  begin
+    WriteLn('bad large inflate: ', d_stream.total_out);
+    Halt(1);
+  end
+  else
+    WriteLn('large_inflate(): OK');
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test deflate with full flush
+ *)
+{$IFDEF TEST_FLUSH}
+procedure test_flush(compr: Pointer; var comprLen : LongInt);
+var c_stream: z_stream; (* compression stream *)
+    err: Integer;
+    len: Integer;
+begin
+  len := StrLen(hello)+1;
+
+  c_stream.zalloc := NIL;
+  c_stream.zfree := NIL;
+  c_stream.opaque := NIL;
+
+  err := deflateInit(c_stream, Z_DEFAULT_COMPRESSION);
+  CHECK_ERR(err, 'deflateInit');
+
+  c_stream.next_in := hello;
+  c_stream.next_out := compr;
+  c_stream.avail_in := 3;
+  c_stream.avail_out := Integer(comprLen);
+  err := deflate(c_stream, Z_FULL_FLUSH);
+  CHECK_ERR(err, 'deflate');
+
+  Inc(PByteArray(compr)^[3]); (* force an error in first compressed block *)
+  c_stream.avail_in := len - 3;
+
+  err := deflate(c_stream, Z_FINISH);
+  if err <> Z_STREAM_END then
+    CHECK_ERR(err, 'deflate');
+
+  err := deflateEnd(c_stream);
+  CHECK_ERR(err, 'deflateEnd');
+
+  comprLen := c_stream.total_out;
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test inflateSync()
+ *)
+{$IFDEF TEST_SYNC}
+procedure test_sync(compr: Pointer; comprLen: LongInt;
+                    uncompr: Pointer; uncomprLen : LongInt);
+var err: Integer;
+    d_stream: z_stream; (* decompression stream *)
+begin
+  StrCopy(PChar(uncompr), 'garbage');
+
+  d_stream.zalloc := NIL;
+  d_stream.zfree := NIL;
+  d_stream.opaque := NIL;
+
+  d_stream.next_in := compr;
+  d_stream.avail_in := 2; (* just read the zlib header *)
+
+  err := inflateInit(d_stream);
+  CHECK_ERR(err, 'inflateInit');
+
+  d_stream.next_out := uncompr;
+  d_stream.avail_out := Integer(uncomprLen);
+
+  inflate(d_stream, Z_NO_FLUSH);
+  CHECK_ERR(err, 'inflate');
+
+  d_stream.avail_in := Integer(comprLen-2);   (* read all compressed data *)
+  err := inflateSync(d_stream);               (* but skip the damaged part *)
+  CHECK_ERR(err, 'inflateSync');
+
+  err := inflate(d_stream, Z_FINISH);
+  if err <> Z_DATA_ERROR then
+    EXIT_ERR('inflate should report DATA_ERROR');
+    (* Because of incorrect adler32 *)
+
+  err := inflateEnd(d_stream);
+  CHECK_ERR(err, 'inflateEnd');
+
+  WriteLn('after inflateSync(): hel', PChar(uncompr));
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test deflate with preset dictionary
+ *)
+{$IFDEF TEST_DICT}
+procedure test_dict_deflate(compr: Pointer; comprLen: LongInt);
+var c_stream: z_stream; (* compression stream *)
+    err: Integer;
+begin
+  c_stream.zalloc := NIL;
+  c_stream.zfree := NIL;
+  c_stream.opaque := NIL;
+
+  err := deflateInit(c_stream, Z_BEST_COMPRESSION);
+  CHECK_ERR(err, 'deflateInit');
+
+  err := deflateSetDictionary(c_stream, dictionary, StrLen(dictionary));
+  CHECK_ERR(err, 'deflateSetDictionary');
+
+  dictId := c_stream.adler;
+  c_stream.next_out := compr;
+  c_stream.avail_out := Integer(comprLen);
+
+  c_stream.next_in := hello;
+  c_stream.avail_in := StrLen(hello)+1;
+
+  err := deflate(c_stream, Z_FINISH);
+  if err <> Z_STREAM_END then
+    EXIT_ERR('deflate should report Z_STREAM_END');
+
+  err := deflateEnd(c_stream);
+  CHECK_ERR(err, 'deflateEnd');
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test inflate with a preset dictionary
+ *)
+{$IFDEF TEST_DICT}
+procedure test_dict_inflate(compr: Pointer; comprLen: LongInt;
+                            uncompr: Pointer; uncomprLen: LongInt);
+var err: Integer;
+    d_stream: z_stream; (* decompression stream *)
+begin
+  StrCopy(PChar(uncompr), 'garbage');
+
+  d_stream.zalloc := NIL;
+  d_stream.zfree := NIL;
+  d_stream.opaque := NIL;
+
+  d_stream.next_in := compr;
+  d_stream.avail_in := Integer(comprLen);
+
+  err := inflateInit(d_stream);
+  CHECK_ERR(err, 'inflateInit');
+
+  d_stream.next_out := uncompr;
+  d_stream.avail_out := Integer(uncomprLen);
+
+  while TRUE do
+  begin
+    err := inflate(d_stream, Z_NO_FLUSH);
+    if err = Z_STREAM_END then
+      break;
+    if err = Z_NEED_DICT then
+    begin
+      if d_stream.adler <> dictId then
+        EXIT_ERR('unexpected dictionary');
+      err := inflateSetDictionary(d_stream, dictionary, StrLen(dictionary));
+    end;
+    CHECK_ERR(err, 'inflate with dict');
+  end;
+
+  err := inflateEnd(d_stream);
+  CHECK_ERR(err, 'inflateEnd');
+
+  if StrComp(PChar(uncompr), hello) <> 0 then
+    EXIT_ERR('bad inflate with dict')
+  else
+    WriteLn('inflate with dictionary: ', PChar(uncompr));
+end;
+{$ENDIF}
+
+var compr, uncompr: Pointer;
+    comprLen, uncomprLen: LongInt;
+
+begin
+  if zlibVersion^ <> ZLIB_VERSION[1] then
+    EXIT_ERR('Incompatible zlib version');
+
+  WriteLn('zlib version: ', zlibVersion);
+  WriteLn('zlib compile flags: ', Format('0x%x', [zlibCompileFlags]));
+
+  comprLen := 10000 * SizeOf(Integer); (* don't overflow on MSDOS *)
+  uncomprLen := comprLen;
+  GetMem(compr, comprLen);
+  GetMem(uncompr, uncomprLen);
+  if (compr = NIL) or (uncompr = NIL) then
+    EXIT_ERR('Out of memory');
+  (* compr and uncompr are cleared to avoid reading uninitialized
+   * data and to ensure that uncompr compresses well.
+   *)
+  FillChar(compr^, comprLen, 0);
+  FillChar(uncompr^, uncomprLen, 0);
+
+  {$IFDEF TEST_COMPRESS}
+  WriteLn('** Testing compress');
+  test_compress(compr, comprLen, uncompr, uncomprLen);
+  {$ENDIF}
+
+  {$IFDEF TEST_GZIO}
+  WriteLn('** Testing gzio');
+  if ParamCount >= 1 then
+    test_gzio(ParamStr(1), uncompr, uncomprLen)
+  else
+    test_gzio(TESTFILE, uncompr, uncomprLen);
+  {$ENDIF}
+
+  {$IFDEF TEST_DEFLATE}
+  WriteLn('** Testing deflate with small buffers');
+  test_deflate(compr, comprLen);
+  {$ENDIF}
+  {$IFDEF TEST_INFLATE}
+  WriteLn('** Testing inflate with small buffers');
+  test_inflate(compr, comprLen, uncompr, uncomprLen);
+  {$ENDIF}
+
+  {$IFDEF TEST_DEFLATE}
+  WriteLn('** Testing deflate with large buffers');
+  test_large_deflate(compr, comprLen, uncompr, uncomprLen);
+  {$ENDIF}
+  {$IFDEF TEST_INFLATE}
+  WriteLn('** Testing inflate with large buffers');
+  test_large_inflate(compr, comprLen, uncompr, uncomprLen);
+  {$ENDIF}
+
+  {$IFDEF TEST_FLUSH}
+  WriteLn('** Testing deflate with full flush');
+  test_flush(compr, comprLen);
+  {$ENDIF}
+  {$IFDEF TEST_SYNC}
+  WriteLn('** Testing inflateSync');
+  test_sync(compr, comprLen, uncompr, uncomprLen);
+  {$ENDIF}
+  comprLen := uncomprLen;
+
+  {$IFDEF TEST_DICT}
+  WriteLn('** Testing deflate and inflate with preset dictionary');
+  test_dict_deflate(compr, comprLen);
+  test_dict_inflate(compr, comprLen, uncompr, uncomprLen);
+  {$ENDIF}
+
+  FreeMem(compr, comprLen);
+  FreeMem(uncompr, uncomprLen);
+end.