BUG=4573,2982,2175,3590
TEST=modules_unittests --gtest_filter=AudioDevice*, AppRTCDemo and WebRTCDemo
Summary:
- Removes dependency of the 'enable_android_opensl' compiler flag.
Instead, OpenSL ES is always supported, and will enabled for devices that
supports low-latency output.
- WebRTC no longer supports OpenSL ES for the input/recording side.
- Removes old code and demos using OpenSL ES for audio input.
- Improves accuracy of total delay estimates (better AEC performance).
- Reduces roundtrip audio latency; especially when OpenSL can be used.
Performance verified on: Nexus 5, 6, 7 and 9. Samsung Galaxy S4 and S6.
Android One device.
R=magjed@webrtc.org, phoglund@webrtc.org, tommi@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/51759004
Cr-Commit-Position: refs/heads/master@{#9208}
This adds functionality from audioproc_float. The geometry parsing code
is now shared from test_utils.h. I removed the "mic_spacing" flag from
audioproc_float because it's a redundancy that I suspect isn't very
useful.
Includes a cleanup of the audio_processing test utils. They're now
packaged in targets, with the protobuf-using ones split out to avoid
requiring users to depend on protobufs.
pcm_utils is no longer needed and removed.
The primary motivation for this CL is that AudioProcessing currently
doesn't support more than two channels and we'd like a way to pass
more channels to the beamformer.
R=aluebs@webrtc.org, mgraczyk@chromium.org
Review URL: https://webrtc-codereview.appspot.com/50899004
Cr-Commit-Position: refs/heads/master@{#9157}
CodecOwner is introduced here; AudioEncoderMutable was introduced in a
previous commit, but had no users until now. The only remaining task
for ACMGenericCodec was to construct and maintain the stack of speech,
CNG, and RED encoders. This task is now handled by the CodecOwner,
which is owned and used by the CodecManager.
COAUTHOR=henrik.lundin@webrtc.org
BUG=4228
R=jmarusic@webrtc.org, minyue@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/43189004
Cr-Commit-Position: refs/heads/master@{#9152}
The Mac64 Debug builder is broken for an unknown failure (trybot is
green, no failure obvious in the commit break). Reverting this CL to see
if it goes green again, and then relanding to see if it is just some
weird flaky build issue.
This reverts commit 5ea8eff55e.
BUG=
TBR=rollback
Review URL: https://webrtc-codereview.appspot.com/47019004
Cr-Commit-Position: refs/heads/master@{#9074}
This means all channels within the same group will share the same pacing queue and scheduler. It also means padding will be computed and sent by a single pacer. To accomplish this I also introduce a PacketRouter which finds the RTP module which owns the packet to be paced out.
BUG=4323
R=mflodman@webrtc.org, pbos@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/45549004
Cr-Commit-Position: refs/heads/master@{#8864}
The current way that iSAC RCU is packetized and sent as a RED packet,
with the same payload type for primary and redundant payloads, does
not follow the specification for RED. As it is now, it is impossible
for a receiver to know if an incoming RED packet with iSAC payloads
inside consists of two "primary" (but time-shifted) payloads, or one
primary and one RCU payload. The RED standard stipulates that the
former option is the correct interpretation, while our implementation
currently applies the latter.
This CL removes support for iSAC RCU from Audio Coding Module, but
leaves it in the iSAC codec itself (i.e., in the C implementation).
BUG=4402
COAUTHOR=kwiberg@webrtc.orgR=tina.legrand@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/45569004
Cr-Commit-Position: refs/heads/master@{#8713}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8713 4adac7df-926f-26a2-2b94-8c16560cd09d
This CL adds support for unittests of the AudioDeviceModule on Android using both Java and C++. The new framework uses ::testing::TesWithParam to support both Java-based audio and OpenSL ES based audio. However, given existing issues in our OpenSL ES implementation, the list of test parameters only contains Java in this first version. Open SL ES will be enabled as soon as the backend has been refactored.
It also:
- Removes the redundant JNIEnv* argument in webrtc::VoiceEngine::SetAndroidObjects().
- Modifies usage of enable_android_opensl and the WEBRTC_ANDROID_OPENSLES define.
- Adds kAndroidJavaAudio and kAndroidOpenSLESAudio to AudioLayer enumerator.
- Fixes some bugs which were discovered when running the tests.
BUG=NONE
R=phoglund@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/40069004
Cr-Commit-Position: refs/heads/master@{#8651}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8651 4adac7df-926f-26a2-2b94-8c16560cd09d
Mostly, it's about moving constructors and descructors to the .cc
files, so that they won't be inlined everywhere.
The reason this CL is so big is that a lot of code was using
common_types.h without declaring a dependency on webrtc_common, which
broke the build once common_types.h started to depend on
common_types.cc.
BUG=163
R=kjellander@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/26089004
Cr-Commit-Position: refs/heads/master@{#8516}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8516 4adac7df-926f-26a2-2b94-8c16560cd09d
The old AcmOpusTest depends on the ACMOpus class, but this class was
obsoleted by AudioEncoderOpus. In this CL, the test code is re-written
to use AudioEncoderOpus and ACMGenericCodecWrapper instead of
ACMOpus. Most of the test functionality is preserved, except for the
packet loss rate tests, which where already transferred to
AudioEncoderOpusTest in r8244.
R=kwiberg@webrtc.org, minyue@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/40029004
Cr-Commit-Position: refs/heads/master@{#8410}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8410 4adac7df-926f-26a2-2b94-8c16560cd09d
This CL performs the following renames of targets to
make GYP and GN more unified and make the targets that
have the same name as the module and include the external
render/capture implementation (the internal one is only
used by WebRTC tests).
This makes it natural to declare dependencies in GN
without having to specify the target.
Summary of the renames:
GYP:
video_render_module_impl -> video_render (new target)
video_capture_module_impl -> video_capture (new target)
GN:
video_capture -> video_capture_module (now identical to the GYP target)
video_capture_impl -> video_capture
video_render -> video_render_module (now identical to the GYP target)
video_render_impl -> video_render
BUG=456815
R=andresp@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/35099004
Cr-Commit-Position: refs/heads/master@{#8323}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8323 4adac7df-926f-26a2-2b94-8c16560cd09d
* Add a new WakeUp method that gives a module a chance to be called back right away on the worker thread.
* Wrote unit tests for the class.
* Significantly reduce the amount of locking.
- ProcessThreadImpl itself does a lot less locking.
- Reimplemented the way we keep track of when to make calls to Process.
This reduces the amount of calls to TimeUntilNextProcess and since most implementations of that function grab a lock, this means less locking.
* Renamed ProcessThread::CreateProcessThread to ProcessThread::Create.
* Added thread checks for Start/Stop. Threading model of other functions is now documented.
* We now log an error if an implementation of TimeUntilNextProcess returns a negative value (some implementations do, but the method should only return a positive nr of ms).
* Removed the DestroyProcessThread method and instead force callers to use scoped_ptr<> to maintain object lifetime.
BUG=2822
R=henrika@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/35999004
Cr-Commit-Position: refs/heads/master@{#8261}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8261 4adac7df-926f-26a2-2b94-8c16560cd09d
This test will replace AcmOpusTest when ACMOpus is removed. The old
AcmOpusTest also contains tests for setting and updating the
"application" setting in Opus. However, in the new AudioEncoderOpus
class, the application is trivially set in the Config struct at
construction, wherefore a test is no longer needed.
BUG=3926
R=minyue@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/37929004
Cr-Commit-Position: refs/heads/master@{#8244}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8244 4adac7df-926f-26a2-2b94-8c16560cd09d
Changes differing from https://webrtc-codereview.appspot.com/37859004:
* I put the include_tests==1 stuff of audio_coding.gypi in its
own audio_coding_tests.gypi file, including the Android and isolate
targets which were incorrectly located in the previous CL
* I moved the bwe utilities in remote_bitrate_estimator.gypi
into include_tests==1 since they depend on test.gyp after I
cleaned up the duplicated inclusion of rtp_file_reader.cc
R=stefan@webrtc.orgTBR=tina.legrand@webrtc.org
TESTED=Passing gyp and compile using:
webrtc/build/gyp_webrtc -Dinclude_tests=1
webrtc/build/gyp_webrtc -Dinclude_tests=0
I also setup a Chromium checkout with my checkout mounted in
third_party/webrtc and ran build/gyp_chromium successfully.
BUG=4185
Review URL: https://webrtc-codereview.appspot.com/33159004
Cr-Commit-Position: refs/heads/master@{#8205}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8205 4adac7df-926f-26a2-2b94-8c16560cd09d
This required to move the AGC tools source files
into webrtc/tools and create a new agc_test_utils target.
Since audio_codec_speed_tests.gypi referenced sources above,
the best approach I could come up with was to add an audio_coding.gypi
file at a higher level and move the targets in there (+ the includes from
modules.gyp which is an improvement IMO).
I also added a PRESUBMIT.py check to prevent new source
entries being added with <(webrtc_root) in the path.
BUG=4185
R=andrew@webrtc.org, tina.legrand@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/37859004
Cr-Commit-Position: refs/heads/master@{#8197}
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8197 4adac7df-926f-26a2-2b94-8c16560cd09d
Take the 50% quantile of the mask and compare it to certain threshold to determine if the desired signal is present. A hold is applied to avoid fast switching between states.
is_signal_present_ has been plotted and looks as expected. The AGC adaptation sounds promising, specially for the cases when the speaker fades in and out from the beam direction.
R=andrew@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/28329005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@8078 4adac7df-926f-26a2-2b94-8c16560cd09d
