Allows setting SSRCs for future simulcast layers even though no set send
codec uses them.
Also re-enabling CanSwitchToUseAllSsrcs as an end-to-end test, required
for bitrate ramp-up, instead of send-side only (resolving issue 3078).
This test was used to verify reserved modules' SSRCs are preserved
correctly.
To enable a multiple-stream end-to-end test test::CallTest was modified
to work on a vector of receive streams instead of just one.
BUG=3078
R=kjellander@webrtc.org, stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/15859005
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6565 4adac7df-926f-26a2-2b94-8c16560cd09d
HW encoder posts the encode callback to libjingle worker
thread. It accesses MediaOptimization and is not protected
by the critial section of VideoSender. Make MediaOptimization
thread-safe to fix it.
BUG=chromium:367691
TEST=Run apprtc loopback with SW or HW encoders.
Run module_unittests.
R=stefan@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/12849004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6562 4adac7df-926f-26a2-2b94-8c16560cd09d
Refactor webrtc/base/BUILD.gn to not have any subtracted
source entries.
Also fix an error in webrtc/BUILD.gn that occurs when running
on Chormium trybots as a part of enabling WebRTC for GN in
https://codereview.chromium.org/321313006/
The error is that pkg-config for dbus-glib fails. Workaround
this by putting the pkg-config entry within the proper condition.
BUG=webrtc:3441
TEST=
Successful compilation of WebRTC as standalone:
gn gen out/Default --args="build_with_chromium=false" && ninja -C out/Default
gn gen out/Default --args="build_with_chromium=false is_clang=true clang_use_chrome_plugins=false" && ninja -C out/Default
I built successfully from a Chromium checkout (with
https://codereview.chromium.org/321313006/ applied) using:
gn gen out/Default && ninja -C out/Default webrtc
R=brettw@chromium.org, henrike@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/16759004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6560 4adac7df-926f-26a2-2b94-8c16560cd09d
This CL introduces a bit-exactness test for the receive-side of the
AudioCoding Module. The main part of the test is done in the helper
class AcmReceiveTest. The test is executed from the test fixture
AcmReceiverBitExactness.
The test inserts packets from a pre-encoded RTP file. The output is
summed up into a checksum, which is verified versus a reference at the
end of the test. Alternatively, if the flag --generate_output is given,
the output is written to a file for subjective verification.
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/13769004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6549 4adac7df-926f-26a2-2b94-8c16560cd09d
This was introduced in r6472 where the target bitrate was changed to be stored in bits/s instead of kbits/s, but the storage type was accidentally left as uint16_t. This caused the bitrate to be truncated, which at times causes NACKs to be dropped due to insufficient bitrate available.
BUG=3518
TEST=Tested in Chrome, trybots and verified that it fixes the bug in vie_auto_test loopback test.
R=mflodman@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/21739004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6544 4adac7df-926f-26a2-2b94-8c16560cd09d
Was causing warnings in Chromium such as:
warning C4742: 'WebRtcAec_overDriveCurve' has different alignment in 'E:\src\buildbot\build\slave\fake_slave\build\src\third_party\webrtc\modules\audio_processing\aec\aec_core_sse2.c' and 'E:\src\buildbot\build\slave\fake_slave\build\src\third_party\webrtc\modules\audio_processing\aec\aec_core.c': 4 and 16
warning C4744: 'WebRtcAec_overDriveCurve' has different type in 'E:\src\buildbot\build\slave\fake_slave\build\src\third_party\webrtc\modules\audio_processing\aec\aec_core_sse2.c' and 'E:\src\buildbot\build\slave\fake_slave\build\src\third_party\webrtc\modules\audio_processing\aec\aec_core.c': 'array (260 bytes)' and '__declspec(align(16)) array (260 bytes)'
warning C4742: 'WebRtcAec_weightCurve' has different alignment in 'E:\src\buildbot\build\slave\fake_slave\build\src\third_party\webrtc\modules\audio_processing\aec\aec_core_sse2.c' and 'E:\src\buildbot\build\slave\fake_slave\build\src\third_party\webrtc\modules\audio_processing\aec\aec_core.c': 4 and 16
warning C4744: 'WebRtcAec_weightCurve' has different type in 'E:\src\buildbot\build\slave\fake_slave\build\src\third_party\webrtc\modules\audio_processing\aec\aec_core_sse2.c' and 'E:\src\buildbot\build\slave\fake_slave\build\src\third_party\webrtc\modules\audio_processing\aec\aec_core.c': 'array (260 bytes)' and '__declspec(align(16)) array (260 bytes)'
BUG=https://code.google.com/p/chromium/issues/detail?id=336620R=andrew@webrtc.org, cd@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/15869004
Patch from Sebastien Marchand <sebmarchand@chromium.org>.
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6525 4adac7df-926f-26a2-2b94-8c16560cd09d
This should work as a foundation for all the work that is
left to do to make the parts of WebRTC that Chromium uses
to build with GN.
I implemented some the smaller modules myself in this CL.
The remaining work (TODO's in the .gn files) will be distributed
to various team members.
I'm adding myself to OWNERS files for BUILD.gn files in all the
directories where I'm adding a BUILD.gn file.
BUG=3441
TEST=
Successful compilation of WebRTC as standalone:
gn gen out/Default --args="build_with_chromium=false" && ninja -C out/Default
gn gen out/Default --args="build_with_chromium=false is_clang=true clang_use_chrome_plugins=false" && ninja -C out/Default
I built successfully from a Chromium checkout (with
https://codereview.chromium.org/321313006/ applied) using:
gn gen out/Default && ninja -C out/Default webrtc
R=brettw@chromium.org, niklas.enbom@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/13749004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6523 4adac7df-926f-26a2-2b94-8c16560cd09d
After rolling chromium_revision in r6516 it seems
TSan v2 turned on deadlock detection by default.
This caused a collection of tests to start failing.
This CL suppresses these failures awaiting further
investigation.
TBR=pbos@webrtc.org
BUG=3509
TEST=Tests passing local execution on Linux using the
reproduction steps in the bug.
Review URL: https://webrtc-codereview.appspot.com/18609004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6519 4adac7df-926f-26a2-2b94-8c16560cd09d
The PeerConnectionEndToEndTest.DataChannelIdAssignment test fails
flakily like this:
[----------] 1 test from PeerConnectionEndToEndTest
[ RUN ] PeerConnectionEndToEndTest.DataChannelIdAssignment
WARNING: no real random source present!
../../talk/app/webrtc/test/peerconnectiontestwrapper.cc:216: Failure
Value of: CheckForConnection()
Actual: false
Expected: true
[ FAILED ] PeerConnectionEndToEndTest.DataChannelIdAssignment (13215 ms)
[----------] 1 test from PeerConnectionEndToEndTest (13223 ms total)
TBR=wu@webrtc.org
BUG=
Review URL: https://webrtc-codereview.appspot.com/20759004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6518 4adac7df-926f-26a2-2b94-8c16560cd09d
Rolling to this new Chromium revision required us to introduce
a sanitizer_options similar to the one in Chromium's base
(see https://code.google.com/p/chromium/codesearch#chromium/src/base/base.gyp&l=977
and https://codereview.chromium.org/238123003) in order
to get the same defaults for ASan and LSan. Without it
compilation will break since LeakSanitizer (LSan) is enabled by
default in Clang r209387 that is pulled with this roll.
I setup so that we pull in the sanitizer_options.cc and
tsan_suppressions.cc files using DEPS, so we don't have to maintain
them separately for now. We can still use our own TSan suppressions.txt
file as we do today with no changes needed.
This roll also brings in http://crrev.com/276676 so we can enable
GN build for WebRTC.
Overview of changes in Chrome DEPS:
$ svn diff http://src.chromium.org/chrome/trunk/src/DEPS -r 272489:277350
which can be compared with the output of:
$ svn cat http://webrtc.googlecode.com/svn/trunk/DEPS | grep chromium_deps | sed 's/^ *//' | sort | uniq
in a WebRTC checkout, gives the following relevant changes:
* third_party/android_tools 6fc0e1:c6e658
* third_party/libjpeg_turbo 263594:272637
* third_party/libyuv 1000:1007
* third_party/nss 271760:277057
* tools/gyp 1921:1927
* tools/swarming_client ae8085:aea506
The following also shows that Clang is upgraded from r206824 to r209387:
$ svn diff http://src.chromium.org/chrome/trunk/src/tools/clang/scripts/update.sh -r 272489:277350
BUG=3441
TEST=Trybots are not passing since after the recipe switch, SVN-based try jobs doesn't seem to support auto-detecting that a sync is needed if there's a DEPS change.
R=andrew@webrtc.org, pbos@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/12729004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6516 4adac7df-926f-26a2-2b94-8c16560cd09d
This change is based on RFC3264:
"Although the answerer MAY list the formats in their desired order of preference, it is RECOMMENDED that unless there is a specific reason, the answerer list formats in the same relative order they were present in the offer."
BUG=2868
TEST=unit tests and manually with munge-sdp test
R=juberti@google.com
Review URL: https://webrtc-codereview.appspot.com/14589004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6514 4adac7df-926f-26a2-2b94-8c16560cd09d
- Allocate real texture for camera preview.
- Add fps and camera frame duration logging.
- Get camera frame timestamp in Java code and pass it to jni code so the frame timestamp is assigned as soon as possible. Jni code will not use these timestamps yet until timestamp ntp correction and zeroing in webrtcvideengine.cc will be addressed.
R=fischman@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/16729004
git-svn-id: http://webrtc.googlecode.com/svn/trunk@6513 4adac7df-926f-26a2-2b94-8c16560cd09d
