generic-library/vpx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
1c4e449133
vpx/vp9/encoder/vp9_firstpass.c
Paul Wilkins 267daddecc Further clean up of estimate_max_q. 
Clean up and simplification of both estimate_max_q
variants and only call once per clip/section.

This leads to a more constrained range of Q values
across a clip / section.

Average gains across all 4 test sets:-

PSNR ~0.5%  SSIM ~0.3%

Change-Id: If77d5f7bb50939a464e117724f4da5b001c62d70
2013-12-09 17:49:46 +00:00

2646 lines
90 KiB
C
Raw Blame History

/*
* Copyright (c) 2010 The WebM project authors. All Rights Reserved.
*
* Use of this source code is governed by a BSD-style license
* that can be found in the LICENSE file in the root of the source
* tree. An additional intellectual property rights grant can be found
* in the file PATENTS. All contributing project authors may
* be found in the AUTHORS file in the root of the source tree.
*/
#include <math.h>
#include <limits.h>
#include <stdio.h>
#include "vp9/common/vp9_systemdependent.h"
#include "vp9/encoder/vp9_block.h"
#include "vp9/encoder/vp9_encodeframe.h"
#include "vp9/encoder/vp9_encodemb.h"
#include "vp9/encoder/vp9_extend.h"
#include "vp9/encoder/vp9_firstpass.h"
#include "vp9/encoder/vp9_mcomp.h"
#include "vp9/encoder/vp9_onyx_int.h"
#include "vp9/encoder/vp9_variance.h"
#include "vpx_scale/vpx_scale.h"
#include "vpx_mem/vpx_mem.h"
#include "vpx_scale/yv12config.h"
#include "vp9/encoder/vp9_quantize.h"
#include "vp9/encoder/vp9_rdopt.h"
#include "vp9/encoder/vp9_ratectrl.h"
#include "vp9/common/vp9_quant_common.h"
#include "vp9/common/vp9_entropymv.h"
#include "vp9/encoder/vp9_encodemv.h"
#include "vp9/encoder/vp9_vaq.h"
#include "./vpx_scale_rtcd.h"
// TODO(jkoleszar): for setup_dst_planes
#include "vp9/common/vp9_reconinter.h"
#define OUTPUT_FPF 0
#define IIFACTOR 12.5
#define IIKFACTOR1 12.5
#define IIKFACTOR2 15.0
#define RMAX 512.0
#define GF_RMAX 96.0
#define ERR_DIVISOR 150.0
#define MIN_DECAY_FACTOR 0.1
#define KF_MB_INTRA_MIN 150
#define GF_MB_INTRA_MIN 100
#define DOUBLE_DIVIDE_CHECK(x) ((x) < 0 ? (x) - 0.000001 : (x) + 0.000001)
#define POW1 (double)cpi->oxcf.two_pass_vbrbias/100.0
#define POW2 (double)cpi->oxcf.two_pass_vbrbias/100.0
static void swap_yv12(YV12_BUFFER_CONFIG *a, YV12_BUFFER_CONFIG *b) {
YV12_BUFFER_CONFIG temp = *a;
*a = *b;
*b = temp;
}
static void find_next_key_frame(VP9_COMP *cpi, FIRSTPASS_STATS *this_frame);
static int select_cq_level(int qindex) {
int ret_val = QINDEX_RANGE - 1;
int i;
double target_q = (vp9_convert_qindex_to_q(qindex) * 0.5847) + 1.0;
for (i = 0; i < QINDEX_RANGE; i++) {
if (target_q <= vp9_convert_qindex_to_q(i)) {
ret_val = i;
break;
}
}
return ret_val;
}
static int gfboost_qadjust(int qindex) {
const double q = vp9_convert_qindex_to_q(qindex);
return (int)((0.00000828 * q * q * q) +
(-0.0055 * q * q) +
(1.32 * q) + 79.3);
}
static int kfboost_qadjust(int qindex) {
const double q = vp9_convert_qindex_to_q(qindex);
return (int)((0.00000973 * q * q * q) +
(-0.00613 * q * q) +
(1.316 * q) + 121.2);
}
// Resets the first pass file to the given position using a relative seek from
// the current position.
static void reset_fpf_position(VP9_COMP *cpi, FIRSTPASS_STATS *position) {
cpi->twopass.stats_in = position;
}
static int lookup_next_frame_stats(VP9_COMP *cpi, FIRSTPASS_STATS *next_frame) {
if (cpi->twopass.stats_in >= cpi->twopass.stats_in_end)
return EOF;
*next_frame = *cpi->twopass.stats_in;
return 1;
}
// Read frame stats at an offset from the current position
static int read_frame_stats(VP9_COMP *cpi,
FIRSTPASS_STATS *frame_stats,
int offset) {
FIRSTPASS_STATS *fps_ptr = cpi->twopass.stats_in;
// Check legality of offset
if (offset >= 0) {
if (&fps_ptr[offset] >= cpi->twopass.stats_in_end)
return EOF;
} else if (offset < 0) {
if (&fps_ptr[offset] < cpi->twopass.stats_in_start)
return EOF;
}
*frame_stats = fps_ptr[offset];
return 1;
}
static int input_stats(VP9_COMP *cpi, FIRSTPASS_STATS *fps) {
if (cpi->twopass.stats_in >= cpi->twopass.stats_in_end)
return EOF;
*fps = *cpi->twopass.stats_in;
cpi->twopass.stats_in =
(void *)((char *)cpi->twopass.stats_in + sizeof(FIRSTPASS_STATS));
return 1;
}
static void output_stats(const VP9_COMP *cpi,
struct vpx_codec_pkt_list *pktlist,
FIRSTPASS_STATS *stats) {
struct vpx_codec_cx_pkt pkt;
pkt.kind = VPX_CODEC_STATS_PKT;
pkt.data.twopass_stats.buf = stats;
pkt.data.twopass_stats.sz = sizeof(FIRSTPASS_STATS);
vpx_codec_pkt_list_add(pktlist, &pkt);
// TEMP debug code
#if OUTPUT_FPF
{
FILE *fpfile;
fpfile = fopen("firstpass.stt", "a");
fprintf(stdout, "%12.0f %12.0f %12.0f %12.0f %12.0f %12.4f %12.4f"
"%12.4f %12.4f %12.4f %12.4f %12.4f %12.4f %12.4f"
"%12.0f %12.0f %12.4f %12.0f %12.0f %12.4f\n",
stats->frame,
stats->intra_error,
stats->coded_error,
stats->sr_coded_error,
stats->ssim_weighted_pred_err,
stats->pcnt_inter,
stats->pcnt_motion,
stats->pcnt_second_ref,
stats->pcnt_neutral,
stats->MVr,
stats->mvr_abs,
stats->MVc,
stats->mvc_abs,
stats->MVrv,
stats->MVcv,
stats->mv_in_out_count,
stats->new_mv_count,
stats->count,
stats->duration);
fclose(fpfile);
}
#endif
}
static void zero_stats(FIRSTPASS_STATS *section) {
section->frame = 0.0;
section->intra_error = 0.0;
section->coded_error = 0.0;
section->sr_coded_error = 0.0;
section->ssim_weighted_pred_err = 0.0;
section->pcnt_inter = 0.0;
section->pcnt_motion = 0.0;
section->pcnt_second_ref = 0.0;
section->pcnt_neutral = 0.0;
section->MVr = 0.0;
section->mvr_abs = 0.0;
section->MVc = 0.0;
section->mvc_abs = 0.0;
section->MVrv = 0.0;
section->MVcv = 0.0;
section->mv_in_out_count = 0.0;
section->new_mv_count = 0.0;
section->count = 0.0;
section->duration = 1.0;
}
static void accumulate_stats(FIRSTPASS_STATS *section, FIRSTPASS_STATS *frame) {
section->frame += frame->frame;
section->intra_error += frame->intra_error;
section->coded_error += frame->coded_error;
section->sr_coded_error += frame->sr_coded_error;
section->ssim_weighted_pred_err += frame->ssim_weighted_pred_err;
section->pcnt_inter += frame->pcnt_inter;
section->pcnt_motion += frame->pcnt_motion;
section->pcnt_second_ref += frame->pcnt_second_ref;
section->pcnt_neutral += frame->pcnt_neutral;
section->MVr += frame->MVr;
section->mvr_abs += frame->mvr_abs;
section->MVc += frame->MVc;
section->mvc_abs += frame->mvc_abs;
section->MVrv += frame->MVrv;
section->MVcv += frame->MVcv;
section->mv_in_out_count += frame->mv_in_out_count;
section->new_mv_count += frame->new_mv_count;
section->count += frame->count;
section->duration += frame->duration;
}
static void subtract_stats(FIRSTPASS_STATS *section, FIRSTPASS_STATS *frame) {
section->frame -= frame->frame;
section->intra_error -= frame->intra_error;
section->coded_error -= frame->coded_error;
section->sr_coded_error -= frame->sr_coded_error;
section->ssim_weighted_pred_err -= frame->ssim_weighted_pred_err;
section->pcnt_inter -= frame->pcnt_inter;
section->pcnt_motion -= frame->pcnt_motion;
section->pcnt_second_ref -= frame->pcnt_second_ref;
section->pcnt_neutral -= frame->pcnt_neutral;
section->MVr -= frame->MVr;
section->mvr_abs -= frame->mvr_abs;
section->MVc -= frame->MVc;
section->mvc_abs -= frame->mvc_abs;
section->MVrv -= frame->MVrv;
section->MVcv -= frame->MVcv;
section->mv_in_out_count -= frame->mv_in_out_count;
section->new_mv_count -= frame->new_mv_count;
section->count -= frame->count;
section->duration -= frame->duration;
}
static void avg_stats(FIRSTPASS_STATS *section) {
if (section->count < 1.0)
return;
section->intra_error /= section->count;
section->coded_error /= section->count;
section->sr_coded_error /= section->count;
section->ssim_weighted_pred_err /= section->count;
section->pcnt_inter /= section->count;
section->pcnt_second_ref /= section->count;
section->pcnt_neutral /= section->count;
section->pcnt_motion /= section->count;
section->MVr /= section->count;
section->mvr_abs /= section->count;
section->MVc /= section->count;
section->mvc_abs /= section->count;
section->MVrv /= section->count;
section->MVcv /= section->count;
section->mv_in_out_count /= section->count;
section->duration /= section->count;
}
// Calculate a modified Error used in distributing bits between easier and
// harder frames.
static double calculate_modified_err(VP9_COMP *cpi,
FIRSTPASS_STATS *this_frame) {
const FIRSTPASS_STATS *const stats = &cpi->twopass.total_stats;
const double av_err = stats->ssim_weighted_pred_err / stats->count;
const double this_err = this_frame->ssim_weighted_pred_err;
return av_err * pow(this_err / DOUBLE_DIVIDE_CHECK(av_err),
this_err > av_err ? POW1 : POW2);
}
static const double weight_table[256] = {
0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000,
0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000,
0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000,
0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.020000,
0.020000, 0.020000, 0.020000, 0.020000, 0.020000, 0.031250, 0.062500,
0.093750, 0.125000, 0.156250, 0.187500, 0.218750, 0.250000, 0.281250,
0.312500, 0.343750, 0.375000, 0.406250, 0.437500, 0.468750, 0.500000,
0.531250, 0.562500, 0.593750, 0.625000, 0.656250, 0.687500, 0.718750,
0.750000, 0.781250, 0.812500, 0.843750, 0.875000, 0.906250, 0.937500,
0.968750, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000, 1.000000,
1.000000, 1.000000, 1.000000, 1.000000
};
static double simple_weight(YV12_BUFFER_CONFIG *source) {
int i, j;
uint8_t *src = source->y_buffer;
double sum_weights = 0.0;
// Loop through the Y plane examining levels and creating a weight for
// the image.
i = source->y_height;
do {
j = source->y_width;
do {
sum_weights += weight_table[ *src];
src++;
} while (--j);
src -= source->y_width;
src += source->y_stride;
} while (--i);
sum_weights /= (source->y_height * source->y_width);
return sum_weights;
}
// This function returns the current per frame maximum bitrate target.
static int frame_max_bits(VP9_COMP *cpi) {
// Max allocation for a single frame based on the max section guidelines
// passed in and how many bits are left.
// For VBR base this on the bits and frames left plus the
// two_pass_vbrmax_section rate passed in by the user.
const double max_bits = (1.0 * cpi->twopass.bits_left /
(cpi->twopass.total_stats.count - cpi->common.current_video_frame)) *
(cpi->oxcf.two_pass_vbrmax_section / 100.0);
if (max_bits < 0)
return 0;
if (max_bits >= INT_MAX)
return INT_MAX;
return (int)max_bits;
}
void vp9_init_first_pass(VP9_COMP *cpi) {
zero_stats(&cpi->twopass.total_stats);
}
void vp9_end_first_pass(VP9_COMP *cpi) {
output_stats(cpi, cpi->output_pkt_list, &cpi->twopass.total_stats);
}
static void zz_motion_search(VP9_COMP *cpi, MACROBLOCK *x,
YV12_BUFFER_CONFIG *recon_buffer,
int *best_motion_err, int recon_yoffset) {
MACROBLOCKD *const xd = &x->e_mbd;
// Set up pointers for this macro block recon buffer
xd->plane[0].pre[0].buf = recon_buffer->y_buffer + recon_yoffset;
switch (xd->mi_8x8[0]->mbmi.sb_type) {
case BLOCK_8X8:
vp9_mse8x8(x->plane[0].src.buf, x->plane[0].src.stride,
xd->plane[0].pre[0].buf, xd->plane[0].pre[0].stride,
(unsigned int *)(best_motion_err));
break;
case BLOCK_16X8:
vp9_mse16x8(x->plane[0].src.buf, x->plane[0].src.stride,
xd->plane[0].pre[0].buf, xd->plane[0].pre[0].stride,
(unsigned int *)(best_motion_err));
break;
case BLOCK_8X16:
vp9_mse8x16(x->plane[0].src.buf, x->plane[0].src.stride,
xd->plane[0].pre[0].buf, xd->plane[0].pre[0].stride,
(unsigned int *)(best_motion_err));
break;
default:
vp9_mse16x16(x->plane[0].src.buf, x->plane[0].src.stride,
xd->plane[0].pre[0].buf, xd->plane[0].pre[0].stride,
(unsigned int *)(best_motion_err));
break;
}
}
static void first_pass_motion_search(VP9_COMP *cpi, MACROBLOCK *x,
int_mv *ref_mv, MV *best_mv,
YV12_BUFFER_CONFIG *recon_buffer,
int *best_motion_err, int recon_yoffset) {
MACROBLOCKD *const xd = &x->e_mbd;
int num00;
int_mv tmp_mv;
int_mv ref_mv_full;
int tmp_err;
int step_param = 3;
int further_steps = (MAX_MVSEARCH_STEPS - 1) - step_param;
int n;
vp9_variance_fn_ptr_t v_fn_ptr =
cpi->fn_ptr[xd->mi_8x8[0]->mbmi.sb_type];
int new_mv_mode_penalty = 256;
int sr = 0;
int quart_frm = MIN(cpi->common.width, cpi->common.height);
// refine the motion search range accroding to the frame dimension
// for first pass test
while ((quart_frm << sr) < MAX_FULL_PEL_VAL)
sr++;
step_param += sr;
further_steps -= sr;
// override the default variance function to use MSE
switch (xd->mi_8x8[0]->mbmi.sb_type) {
case BLOCK_8X8:
v_fn_ptr.vf = vp9_mse8x8;
break;
case BLOCK_16X8:
v_fn_ptr.vf = vp9_mse16x8;
break;
case BLOCK_8X16:
v_fn_ptr.vf = vp9_mse8x16;
break;
default:
v_fn_ptr.vf = vp9_mse16x16;
break;
}
// Set up pointers for this macro block recon buffer
xd->plane[0].pre[0].buf = recon_buffer->y_buffer + recon_yoffset;
// Initial step/diamond search centred on best mv
tmp_mv.as_int = 0;
ref_mv_full.as_mv.col = ref_mv->as_mv.col >> 3;
ref_mv_full.as_mv.row = ref_mv->as_mv.row >> 3;
tmp_err = cpi->diamond_search_sad(x, &ref_mv_full, &tmp_mv, step_param,
x->sadperbit16, &num00, &v_fn_ptr,
x->nmvjointcost,
x->mvcost, ref_mv);
if (tmp_err < INT_MAX - new_mv_mode_penalty)
tmp_err += new_mv_mode_penalty;
if (tmp_err < *best_motion_err) {
*best_motion_err = tmp_err;
best_mv->row = tmp_mv.as_mv.row;
best_mv->col = tmp_mv.as_mv.col;
}
// Further step/diamond searches as necessary
n = num00;
num00 = 0;
while (n < further_steps) {
n++;
if (num00) {
num00--;
} else {
tmp_err = cpi->diamond_search_sad(x, &ref_mv_full, &tmp_mv,
step_param + n, x->sadperbit16,
&num00, &v_fn_ptr,
x->nmvjointcost,
x->mvcost, ref_mv);
if (tmp_err < INT_MAX - new_mv_mode_penalty)
tmp_err += new_mv_mode_penalty;
if (tmp_err < *best_motion_err) {
*best_motion_err = tmp_err;
best_mv->row = tmp_mv.as_mv.row;
best_mv->col = tmp_mv.as_mv.col;
}
}
}
}
void vp9_first_pass(VP9_COMP *cpi) {
int mb_row, mb_col;
MACROBLOCK *const x = &cpi->mb;
VP9_COMMON *const cm = &cpi->common;
MACROBLOCKD *const xd = &x->e_mbd;
TileInfo tile;
struct macroblock_plane *const p = x->plane;
struct macroblockd_plane *const pd = xd->plane;
PICK_MODE_CONTEXT *ctx = &x->sb64_context;
int i;
int recon_yoffset, recon_uvoffset;
const int lst_yv12_idx = cm->ref_frame_map[cpi->lst_fb_idx];
const int gld_yv12_idx = cm->ref_frame_map[cpi->gld_fb_idx];
YV12_BUFFER_CONFIG *const lst_yv12 = &cm->yv12_fb[lst_yv12_idx];
YV12_BUFFER_CONFIG *const gld_yv12 = &cm->yv12_fb[gld_yv12_idx];
YV12_BUFFER_CONFIG *const new_yv12 = get_frame_new_buffer(cm);
const int recon_y_stride = lst_yv12->y_stride;
const int recon_uv_stride = lst_yv12->uv_stride;
int64_t intra_error = 0;
int64_t coded_error = 0;
int64_t sr_coded_error = 0;
int sum_mvr = 0, sum_mvc = 0;
int sum_mvr_abs = 0, sum_mvc_abs = 0;
int sum_mvrs = 0, sum_mvcs = 0;
int mvcount = 0;
int intercount = 0;
int second_ref_count = 0;
int intrapenalty = 256;
int neutral_count = 0;
int new_mv_count = 0;
int sum_in_vectors = 0;
uint32_t lastmv_as_int = 0;
int_mv zero_ref_mv;
zero_ref_mv.as_int = 0;
vp9_clear_system_state(); // __asm emms;
vp9_setup_src_planes(x, cpi->Source, 0, 0);
setup_pre_planes(xd, 0, lst_yv12, 0, 0, NULL);
setup_dst_planes(xd, new_yv12, 0, 0);
xd->mi_8x8 = cm->mi_grid_visible;
// required for vp9_frame_init_quantizer
xd->mi_8x8[0] = cm->mi;
setup_block_dptrs(&x->e_mbd, cm->subsampling_x, cm->subsampling_y);
vp9_frame_init_quantizer(cpi);
for (i = 0; i < MAX_MB_PLANE; ++i) {
p[i].coeff = ctx->coeff_pbuf[i][1];
p[i].qcoeff = ctx->qcoeff_pbuf[i][1];
pd[i].dqcoeff = ctx->dqcoeff_pbuf[i][1];
p[i].eobs = ctx->eobs_pbuf[i][1];
}
x->skip_recode = 0;
// Initialise the MV cost table to the defaults
// if( cm->current_video_frame == 0)
// if ( 0 )
{
vp9_init_mv_probs(cm);
vp9_initialize_rd_consts(cpi);
}
// tiling is ignored in the first pass
vp9_tile_init(&tile, cm, 0, 0);
// for each macroblock row in image
for (mb_row = 0; mb_row < cm->mb_rows; mb_row++) {
int_mv best_ref_mv;
best_ref_mv.as_int = 0;
// reset above block coeffs
xd->up_available = (mb_row != 0);
recon_yoffset = (mb_row * recon_y_stride * 16);
recon_uvoffset = (mb_row * recon_uv_stride * 8);
// Set up limit values for motion vectors to prevent them extending
// outside the UMV borders
x->mv_row_min = -((mb_row * 16) + BORDER_MV_PIXELS_B16);
x->mv_row_max = ((cm->mb_rows - 1 - mb_row) * 16)
+ BORDER_MV_PIXELS_B16;
// for each macroblock col in image
for (mb_col = 0; mb_col < cm->mb_cols; mb_col++) {
int this_error;
int gf_motion_error = INT_MAX;
int use_dc_pred = (mb_col || mb_row) && (!mb_col || !mb_row);
double error_weight;
vp9_clear_system_state(); // __asm emms;
error_weight = 1.0; // avoid uninitialized warnings
xd->plane[0].dst.buf = new_yv12->y_buffer + recon_yoffset;
xd->plane[1].dst.buf = new_yv12->u_buffer + recon_uvoffset;
xd->plane[2].dst.buf = new_yv12->v_buffer + recon_uvoffset;
xd->left_available = (mb_col != 0);
if (mb_col * 2 + 1 < cm->mi_cols) {
if (mb_row * 2 + 1 < cm->mi_rows) {
xd->mi_8x8[0]->mbmi.sb_type = BLOCK_16X16;
} else {
xd->mi_8x8[0]->mbmi.sb_type = BLOCK_16X8;
}
} else {
if (mb_row * 2 + 1 < cm->mi_rows) {
xd->mi_8x8[0]->mbmi.sb_type = BLOCK_8X16;
} else {
xd->mi_8x8[0]->mbmi.sb_type = BLOCK_8X8;
}
}
xd->mi_8x8[0]->mbmi.ref_frame[0] = INTRA_FRAME;
set_mi_row_col(xd, &tile,
mb_row << 1,
num_8x8_blocks_high_lookup[xd->mi_8x8[0]->mbmi.sb_type],
mb_col << 1,
num_8x8_blocks_wide_lookup[xd->mi_8x8[0]->mbmi.sb_type],
cm->mi_rows, cm->mi_cols);
if (cpi->oxcf.aq_mode == VARIANCE_AQ) {
int energy = vp9_block_energy(cpi, x, xd->mi_8x8[0]->mbmi.sb_type);
error_weight = vp9_vaq_inv_q_ratio(energy);
}
// do intra 16x16 prediction
this_error = vp9_encode_intra(x, use_dc_pred);
if (cpi->oxcf.aq_mode == VARIANCE_AQ) {
vp9_clear_system_state(); // __asm emms;
this_error *= error_weight;
}
// intrapenalty below deals with situations where the intra and inter
// error scores are very low (eg a plain black frame).
// We do not have special cases in first pass for 0,0 and nearest etc so
// all inter modes carry an overhead cost estimate for the mv.
// When the error score is very low this causes us to pick all or lots of
// INTRA modes and throw lots of key frames.
// This penalty adds a cost matching that of a 0,0 mv to the intra case.
this_error += intrapenalty;
// Cumulative intra error total
intra_error += (int64_t)this_error;
// Set up limit values for motion vectors to prevent them extending
// outside the UMV borders.
x->mv_col_min = -((mb_col * 16) + BORDER_MV_PIXELS_B16);
x->mv_col_max = ((cm->mb_cols - 1 - mb_col) * 16)
+ BORDER_MV_PIXELS_B16;
// Other than for the first frame do a motion search
if (cm->current_video_frame > 0) {
int tmp_err;
int motion_error = INT_MAX;
int_mv mv, tmp_mv;
// Simple 0,0 motion with no mv overhead
zz_motion_search(cpi, x, lst_yv12, &motion_error, recon_yoffset);
mv.as_int = tmp_mv.as_int = 0;
// Test last reference frame using the previous best mv as the
// starting point (best reference) for the search
first_pass_motion_search(cpi, x, &best_ref_mv,
&mv.as_mv, lst_yv12,
&motion_error, recon_yoffset);
if (cpi->oxcf.aq_mode == VARIANCE_AQ) {
vp9_clear_system_state(); // __asm emms;
motion_error *= error_weight;
}
// If the current best reference mv is not centered on 0,0 then do a 0,0
// based search as well.
if (best_ref_mv.as_int) {
tmp_err = INT_MAX;
first_pass_motion_search(cpi, x, &zero_ref_mv, &tmp_mv.as_mv,
lst_yv12, &tmp_err, recon_yoffset);
if (cpi->oxcf.aq_mode == VARIANCE_AQ) {
vp9_clear_system_state(); // __asm emms;
tmp_err *= error_weight;
}
if (tmp_err < motion_error) {
motion_error = tmp_err;
mv.as_int = tmp_mv.as_int;
}
}
// Experimental search in an older reference frame
if (cm->current_video_frame > 1) {
// Simple 0,0 motion with no mv overhead
zz_motion_search(cpi, x, gld_yv12,
&gf_motion_error, recon_yoffset);
first_pass_motion_search(cpi, x, &zero_ref_mv,
&tmp_mv.as_mv, gld_yv12,
&gf_motion_error, recon_yoffset);
if (cpi->oxcf.aq_mode == VARIANCE_AQ) {
vp9_clear_system_state(); // __asm emms;
gf_motion_error *= error_weight;
}
if ((gf_motion_error < motion_error) &&
(gf_motion_error < this_error)) {
second_ref_count++;
}
// Reset to last frame as reference buffer
xd->plane[0].pre[0].buf = lst_yv12->y_buffer + recon_yoffset;
xd->plane[1].pre[0].buf = lst_yv12->u_buffer + recon_uvoffset;
xd->plane[2].pre[0].buf = lst_yv12->v_buffer + recon_uvoffset;
// In accumulating a score for the older reference frame
// take the best of the motion predicted score and
// the intra coded error (just as will be done for)
// accumulation of "coded_error" for the last frame.
if (gf_motion_error < this_error)
sr_coded_error += gf_motion_error;
else
sr_coded_error += this_error;
} else {
sr_coded_error += motion_error;
}
/* Intra assumed best */
best_ref_mv.as_int = 0;
if (motion_error <= this_error) {
// Keep a count of cases where the inter and intra were
// very close and very low. This helps with scene cut
// detection for example in cropped clips with black bars
// at the sides or top and bottom.
if ((((this_error - intrapenalty) * 9) <=
(motion_error * 10)) &&
(this_error < (2 * intrapenalty))) {
neutral_count++;
}
mv.as_mv.row *= 8;
mv.as_mv.col *= 8;
this_error = motion_error;
vp9_set_mbmode_and_mvs(x, NEWMV, &mv);
xd->mi_8x8[0]->mbmi.tx_size = TX_4X4;
xd->mi_8x8[0]->mbmi.ref_frame[0] = LAST_FRAME;
xd->mi_8x8[0]->mbmi.ref_frame[1] = NONE;
vp9_build_inter_predictors_sby(xd, mb_row << 1,
mb_col << 1,
xd->mi_8x8[0]->mbmi.sb_type);
vp9_encode_sby(x, xd->mi_8x8[0]->mbmi.sb_type);
sum_mvr += mv.as_mv.row;
sum_mvr_abs += abs(mv.as_mv.row);
sum_mvc += mv.as_mv.col;
sum_mvc_abs += abs(mv.as_mv.col);
sum_mvrs += mv.as_mv.row * mv.as_mv.row;
sum_mvcs += mv.as_mv.col * mv.as_mv.col;
intercount++;
best_ref_mv.as_int = mv.as_int;
// Was the vector non-zero
if (mv.as_int) {
mvcount++;
// Was it different from the last non zero vector
if (mv.as_int != lastmv_as_int)
new_mv_count++;
lastmv_as_int = mv.as_int;
// Does the Row vector point inwards or outwards
if (mb_row < cm->mb_rows / 2) {
if (mv.as_mv.row > 0)
sum_in_vectors--;
else if (mv.as_mv.row < 0)
sum_in_vectors++;
} else if (mb_row > cm->mb_rows / 2) {
if (mv.as_mv.row > 0)
sum_in_vectors++;
else if (mv.as_mv.row < 0)
sum_in_vectors--;
}
// Does the Row vector point inwards or outwards
if (mb_col < cm->mb_cols / 2) {
if (mv.as_mv.col > 0)
sum_in_vectors--;
else if (mv.as_mv.col < 0)
sum_in_vectors++;
} else if (mb_col > cm->mb_cols / 2) {
if (mv.as_mv.col > 0)
sum_in_vectors++;
else if (mv.as_mv.col < 0)
sum_in_vectors--;
}
}
}
} else {
sr_coded_error += (int64_t)this_error;
}
coded_error += (int64_t)this_error;
// adjust to the next column of macroblocks
x->plane[0].src.buf += 16;
x->plane[1].src.buf += 8;
x->plane[2].src.buf += 8;
recon_yoffset += 16;
recon_uvoffset += 8;
}
// adjust to the next row of mbs
x->plane[0].src.buf += 16 * x->plane[0].src.stride - 16 * cm->mb_cols;
x->plane[1].src.buf += 8 * x->plane[1].src.stride - 8 * cm->mb_cols;
x->plane[2].src.buf += 8 * x->plane[1].src.stride - 8 * cm->mb_cols;
vp9_clear_system_state(); // __asm emms;
}
vp9_clear_system_state(); // __asm emms;
{
double weight = 0.0;
FIRSTPASS_STATS fps;
fps.frame = cm->current_video_frame;
fps.intra_error = (double)(intra_error >> 8);
fps.coded_error = (double)(coded_error >> 8);
fps.sr_coded_error = (double)(sr_coded_error >> 8);
weight = simple_weight(cpi->Source);
if (weight < 0.1)
weight = 0.1;
fps.ssim_weighted_pred_err = fps.coded_error * weight;
fps.pcnt_inter = 0.0;
fps.pcnt_motion = 0.0;
fps.MVr = 0.0;
fps.mvr_abs = 0.0;
fps.MVc = 0.0;
fps.mvc_abs = 0.0;
fps.MVrv = 0.0;
fps.MVcv = 0.0;
fps.mv_in_out_count = 0.0;
fps.new_mv_count = 0.0;
fps.count = 1.0;
fps.pcnt_inter = 1.0 * (double)intercount / cm->MBs;
fps.pcnt_second_ref = 1.0 * (double)second_ref_count / cm->MBs;
fps.pcnt_neutral = 1.0 * (double)neutral_count / cm->MBs;
if (mvcount > 0) {
fps.MVr = (double)sum_mvr / (double)mvcount;
fps.mvr_abs = (double)sum_mvr_abs / (double)mvcount;
fps.MVc = (double)sum_mvc / (double)mvcount;
fps.mvc_abs = (double)sum_mvc_abs / (double)mvcount;
fps.MVrv = ((double)sum_mvrs - (fps.MVr * fps.MVr / (double)mvcount)) /
(double)mvcount;
fps.MVcv = ((double)sum_mvcs - (fps.MVc * fps.MVc / (double)mvcount)) /
(double)mvcount;
fps.mv_in_out_count = (double)sum_in_vectors / (double)(mvcount * 2);
fps.new_mv_count = new_mv_count;
fps.pcnt_motion = 1.0 * (double)mvcount / cpi->common.MBs;
}
// TODO(paulwilkins): Handle the case when duration is set to 0, or
// something less than the full time between subsequent values of
// cpi->source_time_stamp.
fps.duration = (double)(cpi->source->ts_end
- cpi->source->ts_start);
// don't want to do output stats with a stack variable!
cpi->twopass.this_frame_stats = fps;
output_stats(cpi, cpi->output_pkt_list, &cpi->twopass.this_frame_stats);
accumulate_stats(&cpi->twopass.total_stats, &fps);
}
// Copy the previous Last Frame back into gf and and arf buffers if
// the prediction is good enough... but also dont allow it to lag too far
if ((cpi->twopass.sr_update_lag > 3) ||
((cm->current_video_frame > 0) &&
(cpi->twopass.this_frame_stats.pcnt_inter > 0.20) &&
((cpi->twopass.this_frame_stats.intra_error /
DOUBLE_DIVIDE_CHECK(cpi->twopass.this_frame_stats.coded_error)) >
2.0))) {
vp8_yv12_copy_frame(lst_yv12, gld_yv12);
cpi->twopass.sr_update_lag = 1;
} else {
cpi->twopass.sr_update_lag++;
}
// swap frame pointers so last frame refers to the frame we just compressed
swap_yv12(lst_yv12, new_yv12);
vp9_extend_frame_borders(lst_yv12, cm->subsampling_x, cm->subsampling_y);
// Special case for the first frame. Copy into the GF buffer as a second
// reference.
if (cm->current_video_frame == 0)
vp8_yv12_copy_frame(lst_yv12, gld_yv12);
// use this to see what the first pass reconstruction looks like
if (0) {
char filename[512];
FILE *recon_file;
snprintf(filename, sizeof(filename), "enc%04d.yuv",
(int)cm->current_video_frame);
if (cm->current_video_frame == 0)
recon_file = fopen(filename, "wb");
else
recon_file = fopen(filename, "ab");
(void)fwrite(lst_yv12->buffer_alloc, lst_yv12->frame_size, 1, recon_file);
fclose(recon_file);
}
cm->current_video_frame++;
}
// Estimate a cost per mb attributable to overheads such as the coding of
// modes and motion vectors.
// Currently simplistic in its assumptions for testing.
//
static double bitcost(double prob) {
return -(log(prob) / log(2.0));
}
static int64_t estimate_modemvcost(VP9_COMP *cpi,
FIRSTPASS_STATS *fpstats) {
#if 0
int mv_cost;
int mode_cost;
double av_pct_inter = fpstats->pcnt_inter / fpstats->count;
double av_pct_motion = fpstats->pcnt_motion / fpstats->count;
double av_intra = (1.0 - av_pct_inter);
double zz_cost;
double motion_cost;
double intra_cost;
zz_cost = bitcost(av_pct_inter - av_pct_motion);
motion_cost = bitcost(av_pct_motion);
intra_cost = bitcost(av_intra);
// Estimate of extra bits per mv overhead for mbs
// << 9 is the normalization to the (bits * 512) used in vp9_rc_bits_per_mb
mv_cost = ((int)(fpstats->new_mv_count / fpstats->count) * 8) << 9;
// Crude estimate of overhead cost from modes
// << 9 is the normalization to (bits * 512) used in vp9_rc_bits_per_mb
mode_cost =
(int)((((av_pct_inter - av_pct_motion) * zz_cost) +
(av_pct_motion * motion_cost) +
(av_intra * intra_cost)) * cpi->common.MBs) << 9;
// return mv_cost + mode_cost;
// TODO(paulwilkins): Fix overhead costs for extended Q range.
#endif
return 0;
}
static double calc_correction_factor(double err_per_mb,
double err_divisor,
double pt_low,
double pt_high,
int q) {
const double error_term = err_per_mb / err_divisor;
// Adjustment based on actual quantizer to power term.
const double power_term = MIN(vp9_convert_qindex_to_q(q) * 0.01 + pt_low,
pt_high);
// Calculate correction factor
if (power_term < 1.0)
assert(error_term >= 0.0);
return fclamp(pow(error_term, power_term), 0.05, 5.0);
}
// Given a current maxQ value sets a range for future values.
// PGW TODO..
// This code removes direct dependency on QIndex to determine the range
// (now uses the actual quantizer) but has not been tuned.
static void adjust_maxq_qrange(VP9_COMP *cpi) {
int i;
// Set the max corresponding to cpi->rc.avg_q * 2.0
double q = cpi->rc.avg_q * 2.0;
cpi->twopass.maxq_max_limit = cpi->rc.worst_quality;
for (i = cpi->rc.best_quality; i <= cpi->rc.worst_quality; i++) {
cpi->twopass.maxq_max_limit = i;
if (vp9_convert_qindex_to_q(i) >= q)
break;
}
// Set the min corresponding to cpi->rc.avg_q * 0.5
q = cpi->rc.avg_q * 0.5;
cpi->twopass.maxq_min_limit = cpi->rc.best_quality;
for (i = cpi->rc.worst_quality; i >= cpi->rc.best_quality; i--) {
cpi->twopass.maxq_min_limit = i;
if (vp9_convert_qindex_to_q(i) <= q)
break;
}
}
static int estimate_max_q(VP9_COMP *cpi,
FIRSTPASS_STATS *fpstats,
int section_target_bandwitdh) {
int q;
int num_mbs = cpi->common.MBs;
int target_norm_bits_per_mb;
double section_err = fpstats->coded_error / fpstats->count;
double err_per_mb = section_err / num_mbs;
double err_correction_factor;
if (section_target_bandwitdh <= 0)
return cpi->twopass.maxq_max_limit; // Highest value allowed
target_norm_bits_per_mb = section_target_bandwitdh < (1 << 20)
? (512 * section_target_bandwitdh) / num_mbs
: 512 * (section_target_bandwitdh / num_mbs);
// Try and pick a max Q that will be high enough to encode the
// content at the given rate.
for (q = cpi->twopass.maxq_min_limit; q < cpi->twopass.maxq_max_limit; q++) {
int bits_per_mb_at_this_q;
err_correction_factor = calc_correction_factor(err_per_mb,
ERR_DIVISOR, 0.4, 0.90, q);
bits_per_mb_at_this_q = vp9_rc_bits_per_mb(INTER_FRAME, q,
err_correction_factor);
if (bits_per_mb_at_this_q <= target_norm_bits_per_mb)
break;
}
// Restriction on active max q for constrained quality mode.
if (cpi->oxcf.end_usage == USAGE_CONSTRAINED_QUALITY &&
q < cpi->cq_target_quality)
q = cpi->cq_target_quality;
return q;
}
// For cq mode estimate a cq level that matches the observed
// complexity and data rate.
static int estimate_cq(VP9_COMP *cpi,
FIRSTPASS_STATS *fpstats,
int section_target_bandwitdh) {
int q;
int num_mbs = cpi->common.MBs;
int target_norm_bits_per_mb;
double section_err = (fpstats->coded_error / fpstats->count);
double err_per_mb = section_err / num_mbs;
double err_correction_factor;
double clip_iiratio;
double clip_iifactor;
target_norm_bits_per_mb = (section_target_bandwitdh < (1 << 20))
? (512 * section_target_bandwitdh) / num_mbs
: 512 * (section_target_bandwitdh / num_mbs);
// II ratio correction factor for clip as a whole
clip_iiratio = cpi->twopass.total_stats.intra_error /
DOUBLE_DIVIDE_CHECK(cpi->twopass.total_stats.coded_error);
clip_iifactor = 1.0 - ((clip_iiratio - 10.0) * 0.025);
if (clip_iifactor < 0.80)
clip_iifactor = 0.80;
// Try and pick a Q that can encode the content at the given rate.
for (q = 0; q < MAXQ; q++) {
int bits_per_mb_at_this_q;
// Error per MB based correction factor
err_correction_factor =
calc_correction_factor(err_per_mb, 100.0, 0.4, 0.90, q) * clip_iifactor;
bits_per_mb_at_this_q =
vp9_rc_bits_per_mb(INTER_FRAME, q, err_correction_factor);
if (bits_per_mb_at_this_q <= target_norm_bits_per_mb)
break;
}
// Clip value to range "best allowed to (worst allowed - 1)"
q = select_cq_level(q);
if (q >= cpi->rc.worst_quality)
q = cpi->rc.worst_quality - 1;
if (q < cpi->rc.best_quality)
q = cpi->rc.best_quality;
return q;
}
extern void vp9_new_framerate(VP9_COMP *cpi, double framerate);
void vp9_init_second_pass(VP9_COMP *cpi) {
FIRSTPASS_STATS this_frame;
FIRSTPASS_STATS *start_pos;
double lower_bounds_min_rate = FRAME_OVERHEAD_BITS * cpi->oxcf.framerate;
double two_pass_min_rate = (double)(cpi->oxcf.target_bandwidth *
cpi->oxcf.two_pass_vbrmin_section / 100);
if (two_pass_min_rate < lower_bounds_min_rate)
two_pass_min_rate = lower_bounds_min_rate;
zero_stats(&cpi->twopass.total_stats);
zero_stats(&cpi->twopass.total_left_stats);
if (!cpi->twopass.stats_in_end)
return;
cpi->twopass.total_stats = *cpi->twopass.stats_in_end;
cpi->twopass.total_left_stats = cpi->twopass.total_stats;
// each frame can have a different duration, as the frame rate in the source
// isn't guaranteed to be constant. The frame rate prior to the first frame
// encoded in the second pass is a guess. However the sum duration is not.
// Its calculated based on the actual durations of all frames from the first
// pass.
vp9_new_framerate(cpi, 10000000.0 * cpi->twopass.total_stats.count /
cpi->twopass.total_stats.duration);
cpi->output_framerate = cpi->oxcf.framerate;
cpi->twopass.bits_left = (int64_t)(cpi->twopass.total_stats.duration *
cpi->oxcf.target_bandwidth / 10000000.0);
cpi->twopass.bits_left -= (int64_t)(cpi->twopass.total_stats.duration *
two_pass_min_rate / 10000000.0);
// Calculate a minimum intra value to be used in determining the IIratio
// scores used in the second pass. We have this minimum to make sure
// that clips that are static but "low complexity" in the intra domain
// are still boosted appropriately for KF/GF/ARF
cpi->twopass.kf_intra_err_min = KF_MB_INTRA_MIN * cpi->common.MBs;
cpi->twopass.gf_intra_err_min = GF_MB_INTRA_MIN * cpi->common.MBs;
// This variable monitors how far behind the second ref update is lagging
cpi->twopass.sr_update_lag = 1;
// Scan the first pass file and calculate an average Intra / Inter error score
// ratio for the sequence.
{
double sum_iiratio = 0.0;
double IIRatio;
start_pos = cpi->twopass.stats_in; // Note the starting "file" position.
while (input_stats(cpi, &this_frame) != EOF) {
IIRatio = this_frame.intra_error
/ DOUBLE_DIVIDE_CHECK(this_frame.coded_error);
IIRatio = (IIRatio < 1.0) ? 1.0 : (IIRatio > 20.0) ? 20.0 : IIRatio;
sum_iiratio += IIRatio;
}
cpi->twopass.avg_iiratio = sum_iiratio /
DOUBLE_DIVIDE_CHECK((double)cpi->twopass.total_stats.count);
// Reset file position
reset_fpf_position(cpi, start_pos);
}
// Scan the first pass file and calculate a modified total error based upon
// the bias/power function used to allocate bits.
{
start_pos = cpi->twopass.stats_in; // Note starting "file" position
cpi->twopass.modified_error_total = 0.0;
cpi->twopass.modified_error_used = 0.0;
while (input_stats(cpi, &this_frame) != EOF) {
cpi->twopass.modified_error_total +=
calculate_modified_err(cpi, &this_frame);
}
cpi->twopass.modified_error_left = cpi->twopass.modified_error_total;
reset_fpf_position(cpi, start_pos); // Reset file position
}
}
void vp9_end_second_pass(VP9_COMP *cpi) {
}
// This function gives and estimate of how badly we believe
// the prediction quality is decaying from frame to frame.
static double get_prediction_decay_rate(VP9_COMP *cpi,
FIRSTPASS_STATS *next_frame) {
double prediction_decay_rate;
double second_ref_decay;
double mb_sr_err_diff;
// Initial basis is the % mbs inter coded
prediction_decay_rate = next_frame->pcnt_inter;
// Look at the observed drop in prediction quality between the last frame
// and the GF buffer (which contains an older frame).
mb_sr_err_diff = (next_frame->sr_coded_error - next_frame->coded_error) /
cpi->common.MBs;
if (mb_sr_err_diff <= 512.0) {
second_ref_decay = 1.0 - (mb_sr_err_diff / 512.0);
second_ref_decay = pow(second_ref_decay, 0.5);
if (second_ref_decay < 0.85)
second_ref_decay = 0.85;
else if (second_ref_decay > 1.0)
second_ref_decay = 1.0;
} else {
second_ref_decay = 0.85;
}
if (second_ref_decay < prediction_decay_rate)
prediction_decay_rate = second_ref_decay;
return prediction_decay_rate;
}
// Function to test for a condition where a complex transition is followed
// by a static section. For example in slide shows where there is a fade
// between slides. This is to help with more optimal kf and gf positioning.
static int detect_transition_to_still(
VP9_COMP *cpi,
int frame_interval,
int still_interval,
double loop_decay_rate,
double last_decay_rate) {
int trans_to_still = 0;
// Break clause to detect very still sections after motion
// For example a static image after a fade or other transition
// instead of a clean scene cut.
if (frame_interval > MIN_GF_INTERVAL &&
loop_decay_rate >= 0.999 &&
last_decay_rate < 0.9) {
int j;
FIRSTPASS_STATS *position = cpi->twopass.stats_in;
FIRSTPASS_STATS tmp_next_frame;
double zz_inter;
// Look ahead a few frames to see if static condition
// persists...
for (j = 0; j < still_interval; j++) {
if (EOF == input_stats(cpi, &tmp_next_frame))
break;
zz_inter =
(tmp_next_frame.pcnt_inter - tmp_next_frame.pcnt_motion);
if (zz_inter < 0.999)
break;
}
// Reset file position
reset_fpf_position(cpi, position);
// Only if it does do we signal a transition to still
if (j == still_interval)
trans_to_still = 1;
}
return trans_to_still;
}
// This function detects a flash through the high relative pcnt_second_ref
// score in the frame following a flash frame. The offset passed in should
// reflect this
static int detect_flash(VP9_COMP *cpi, int offset) {
FIRSTPASS_STATS next_frame;
int flash_detected = 0;
// Read the frame data.
// The return is FALSE (no flash detected) if not a valid frame
if (read_frame_stats(cpi, &next_frame, offset) != EOF) {
// What we are looking for here is a situation where there is a
// brief break in prediction (such as a flash) but subsequent frames
// are reasonably well predicted by an earlier (pre flash) frame.
// The recovery after a flash is indicated by a high pcnt_second_ref
// comapred to pcnt_inter.
if (next_frame.pcnt_second_ref > next_frame.pcnt_inter &&
next_frame.pcnt_second_ref >= 0.5)
flash_detected = 1;
}
return flash_detected;
}
// Update the motion related elements to the GF arf boost calculation
static void accumulate_frame_motion_stats(
FIRSTPASS_STATS *this_frame,
double *this_frame_mv_in_out,
double *mv_in_out_accumulator,
double *abs_mv_in_out_accumulator,
double *mv_ratio_accumulator) {
// double this_frame_mv_in_out;
double this_frame_mvr_ratio;
double this_frame_mvc_ratio;
double motion_pct;
// Accumulate motion stats.
motion_pct = this_frame->pcnt_motion;
// Accumulate Motion In/Out of frame stats
*this_frame_mv_in_out = this_frame->mv_in_out_count * motion_pct;
*mv_in_out_accumulator += this_frame->mv_in_out_count * motion_pct;
*abs_mv_in_out_accumulator +=
fabs(this_frame->mv_in_out_count * motion_pct);
// Accumulate a measure of how uniform (or conversely how random)
// the motion field is. (A ratio of absmv / mv)
if (motion_pct > 0.05) {
this_frame_mvr_ratio = fabs(this_frame->mvr_abs) /
DOUBLE_DIVIDE_CHECK(fabs(this_frame->MVr));
this_frame_mvc_ratio = fabs(this_frame->mvc_abs) /
DOUBLE_DIVIDE_CHECK(fabs(this_frame->MVc));
*mv_ratio_accumulator +=
(this_frame_mvr_ratio < this_frame->mvr_abs)
? (this_frame_mvr_ratio * motion_pct)
: this_frame->mvr_abs * motion_pct;
*mv_ratio_accumulator +=
(this_frame_mvc_ratio < this_frame->mvc_abs)
? (this_frame_mvc_ratio * motion_pct)
: this_frame->mvc_abs * motion_pct;
}
}
// Calculate a baseline boost number for the current frame.
static double calc_frame_boost(
VP9_COMP *cpi,
FIRSTPASS_STATS *this_frame,
double this_frame_mv_in_out) {
double frame_boost;
// Underlying boost factor is based on inter intra error ratio
if (this_frame->intra_error > cpi->twopass.gf_intra_err_min)
frame_boost = (IIFACTOR * this_frame->intra_error /
DOUBLE_DIVIDE_CHECK(this_frame->coded_error));
else
frame_boost = (IIFACTOR * cpi->twopass.gf_intra_err_min /
DOUBLE_DIVIDE_CHECK(this_frame->coded_error));
// Increase boost for frames where new data coming into frame
// (eg zoom out). Slightly reduce boost if there is a net balance
// of motion out of the frame (zoom in).
// The range for this_frame_mv_in_out is -1.0 to +1.0
if (this_frame_mv_in_out > 0.0)
frame_boost += frame_boost * (this_frame_mv_in_out * 2.0);
// In extreme case boost is halved
else
frame_boost += frame_boost * (this_frame_mv_in_out / 2.0);
// Clip to maximum
if (frame_boost > GF_RMAX)
frame_boost = GF_RMAX;
return frame_boost;
}
static int calc_arf_boost(VP9_COMP *cpi, int offset,
int f_frames, int b_frames,
int *f_boost, int *b_boost) {
FIRSTPASS_STATS this_frame;
int i;
double boost_score = 0.0;
double mv_ratio_accumulator = 0.0;
double decay_accumulator = 1.0;
double this_frame_mv_in_out = 0.0;
double mv_in_out_accumulator = 0.0;
double abs_mv_in_out_accumulator = 0.0;
int arf_boost;
int flash_detected = 0;
// Search forward from the proposed arf/next gf position
for (i = 0; i < f_frames; i++) {
if (read_frame_stats(cpi, &this_frame, (i + offset)) == EOF)
break;
// Update the motion related elements to the boost calculation
accumulate_frame_motion_stats(&this_frame,
&this_frame_mv_in_out, &mv_in_out_accumulator,
&abs_mv_in_out_accumulator,
&mv_ratio_accumulator);
// We want to discount the flash frame itself and the recovery
// frame that follows as both will have poor scores.
flash_detected = detect_flash(cpi, (i + offset)) ||
detect_flash(cpi, (i + offset + 1));
// Cumulative effect of prediction quality decay
if (!flash_detected) {
decay_accumulator *= get_prediction_decay_rate(cpi, &this_frame);
decay_accumulator = decay_accumulator < MIN_DECAY_FACTOR
? MIN_DECAY_FACTOR : decay_accumulator;
}
boost_score += (decay_accumulator *
calc_frame_boost(cpi, &this_frame, this_frame_mv_in_out));
}
*f_boost = (int)boost_score;
// Reset for backward looking loop
boost_score = 0.0;
mv_ratio_accumulator = 0.0;
decay_accumulator = 1.0;
this_frame_mv_in_out = 0.0;
mv_in_out_accumulator = 0.0;
abs_mv_in_out_accumulator = 0.0;
// Search backward towards last gf position
for (i = -1; i >= -b_frames; i--) {
if (read_frame_stats(cpi, &this_frame, (i + offset)) == EOF)
break;
// Update the motion related elements to the boost calculation
accumulate_frame_motion_stats(&this_frame,
&this_frame_mv_in_out, &mv_in_out_accumulator,
&abs_mv_in_out_accumulator,
&mv_ratio_accumulator);
// We want to discount the the flash frame itself and the recovery
// frame that follows as both will have poor scores.
flash_detected = detect_flash(cpi, (i + offset)) ||
detect_flash(cpi, (i + offset + 1));
// Cumulative effect of prediction quality decay
if (!flash_detected) {
decay_accumulator *= get_prediction_decay_rate(cpi, &this_frame);
decay_accumulator = decay_accumulator < MIN_DECAY_FACTOR
? MIN_DECAY_FACTOR : decay_accumulator;
}
boost_score += (decay_accumulator *
calc_frame_boost(cpi, &this_frame, this_frame_mv_in_out));
}
*b_boost = (int)boost_score;
arf_boost = (*f_boost + *b_boost);
if (arf_boost < ((b_frames + f_frames) * 20))
arf_boost = ((b_frames + f_frames) * 20);
return arf_boost;
}
#if CONFIG_MULTIPLE_ARF
// Work out the frame coding order for a GF or an ARF group.
// The current implementation codes frames in their natural order for a
// GF group, and inserts additional ARFs into an ARF group using a
// binary split approach.
// NOTE: this function is currently implemented recursively.
static void schedule_frames(VP9_COMP *cpi, const int start, const int end,
const int arf_idx, const int gf_or_arf_group,
const int level) {
int i, abs_end, half_range;
int *cfo = cpi->frame_coding_order;
int idx = cpi->new_frame_coding_order_period;
// If (end < 0) an ARF should be coded at position (-end).
assert(start >= 0);
// printf("start:%d end:%d\n", start, end);
// GF Group: code frames in logical order.
if (gf_or_arf_group == 0) {
assert(end >= start);
for (i = start; i <= end; ++i) {
cfo[idx] = i;
cpi->arf_buffer_idx[idx] = arf_idx;
cpi->arf_weight[idx] = -1;
++idx;
}
cpi->new_frame_coding_order_period = idx;
return;
}
// ARF Group: work out the ARF schedule.
// Mark ARF frames as negative.
if (end < 0) {
// printf("start:%d end:%d\n", -end, -end);
// ARF frame is at the end of the range.
cfo[idx] = end;
// What ARF buffer does this ARF use as predictor.
cpi->arf_buffer_idx[idx] = (arf_idx > 2) ? (arf_idx - 1) : 2;
cpi->arf_weight[idx] = level;
++idx;
abs_end = -end;
} else {
abs_end = end;
}
half_range = (abs_end - start) >> 1;
// ARFs may not be adjacent, they must be separated by at least
// MIN_GF_INTERVAL non-ARF frames.
if ((start + MIN_GF_INTERVAL) >= (abs_end - MIN_GF_INTERVAL)) {
// printf("start:%d end:%d\n", start, abs_end);
// Update the coding order and active ARF.
for (i = start; i <= abs_end; ++i) {
cfo[idx] = i;
cpi->arf_buffer_idx[idx] = arf_idx;
cpi->arf_weight[idx] = -1;
++idx;
}
cpi->new_frame_coding_order_period = idx;
} else {
// Place a new ARF at the mid-point of the range.
cpi->new_frame_coding_order_period = idx;
schedule_frames(cpi, start, -(start + half_range), arf_idx + 1,
gf_or_arf_group, level + 1);
schedule_frames(cpi, start + half_range + 1, abs_end, arf_idx,
gf_or_arf_group, level + 1);
}
}
#define FIXED_ARF_GROUP_SIZE 16
void define_fixed_arf_period(VP9_COMP *cpi) {
int i;
int max_level = INT_MIN;
assert(cpi->multi_arf_enabled);
assert(cpi->oxcf.lag_in_frames >= FIXED_ARF_GROUP_SIZE);
// Save the weight of the last frame in the sequence before next
// sequence pattern overwrites it.
cpi->this_frame_weight = cpi->arf_weight[cpi->sequence_number];
assert(cpi->this_frame_weight >= 0);
// Initialize frame coding order variables.
cpi->new_frame_coding_order_period = 0;
cpi->next_frame_in_order = 0;
cpi->arf_buffered = 0;
vp9_zero(cpi->frame_coding_order);
vp9_zero(cpi->arf_buffer_idx);
vpx_memset(cpi->arf_weight, -1, sizeof(cpi->arf_weight));
if (cpi->twopass.frames_to_key <= (FIXED_ARF_GROUP_SIZE + 8)) {
// Setup a GF group close to the keyframe.
cpi->source_alt_ref_pending = 0;
cpi->rc.baseline_gf_interval = cpi->twopass.frames_to_key;
schedule_frames(cpi, 0, (cpi->rc.baseline_gf_interval - 1), 2, 0, 0);
} else {
// Setup a fixed period ARF group.
cpi->source_alt_ref_pending = 1;
cpi->rc.baseline_gf_interval = FIXED_ARF_GROUP_SIZE;
schedule_frames(cpi, 0, -(cpi->rc.baseline_gf_interval - 1), 2, 1, 0);
}
// Replace level indicator of -1 with correct level.
for (i = 0; i < cpi->new_frame_coding_order_period; ++i) {
if (cpi->arf_weight[i] > max_level) {
max_level = cpi->arf_weight[i];
}
}
++max_level;
for (i = 0; i < cpi->new_frame_coding_order_period; ++i) {
if (cpi->arf_weight[i] == -1) {
cpi->arf_weight[i] = max_level;
}
}
cpi->max_arf_level = max_level;
#if 0
printf("\nSchedule: ");
for (i = 0; i < cpi->new_frame_coding_order_period; ++i) {
printf("%4d ", cpi->frame_coding_order[i]);
}
printf("\n");
printf("ARFref: ");
for (i = 0; i < cpi->new_frame_coding_order_period; ++i) {
printf("%4d ", cpi->arf_buffer_idx[i]);
}
printf("\n");
printf("Weight: ");
for (i = 0; i < cpi->new_frame_coding_order_period; ++i) {
printf("%4d ", cpi->arf_weight[i]);
}
printf("\n");
#endif
}
#endif
// Analyse and define a gf/arf group.
static void define_gf_group(VP9_COMP *cpi, FIRSTPASS_STATS *this_frame) {
FIRSTPASS_STATS next_frame = { 0 };
FIRSTPASS_STATS *start_pos;
int i;
double boost_score = 0.0;
double old_boost_score = 0.0;
double gf_group_err = 0.0;
double gf_first_frame_err = 0.0;
double mod_frame_err = 0.0;
double mv_ratio_accumulator = 0.0;
double decay_accumulator = 1.0;
double zero_motion_accumulator = 1.0;
double loop_decay_rate = 1.00; // Starting decay rate
double last_loop_decay_rate = 1.00;
double this_frame_mv_in_out = 0.0;
double mv_in_out_accumulator = 0.0;
double abs_mv_in_out_accumulator = 0.0;
double mv_ratio_accumulator_thresh;
int max_bits = frame_max_bits(cpi); // Max for a single frame
unsigned int allow_alt_ref =
cpi->oxcf.play_alternate && cpi->oxcf.lag_in_frames;
int f_boost = 0;
int b_boost = 0;
int flash_detected;
int active_max_gf_interval;
cpi->twopass.gf_group_bits = 0;
vp9_clear_system_state(); // __asm emms;
start_pos = cpi->twopass.stats_in;
// Load stats for the current frame.
mod_frame_err = calculate_modified_err(cpi, this_frame);
// Note the error of the frame at the start of the group (this will be
// the GF frame error if we code a normal gf
gf_first_frame_err = mod_frame_err;
// Special treatment if the current frame is a key frame (which is also
// a gf). If it is then its error score (and hence bit allocation) need
// to be subtracted out from the calculation for the GF group
if (cpi->common.frame_type == KEY_FRAME)
gf_group_err -= gf_first_frame_err;
// Motion breakout threshold for loop below depends on image size.
mv_ratio_accumulator_thresh = (cpi->common.width + cpi->common.height) / 10.0;
// Work out a maximum interval for the GF.
// If the image appears completely static we can extend beyond this.
// The value chosen depends on the active Q range. At low Q we have
// bits to spare and are better with a smaller interval and smaller boost.
// At high Q when there are few bits to spare we are better with a longer
// interval to spread the cost of the GF.
active_max_gf_interval =
12 + ((int)vp9_convert_qindex_to_q(cpi->rc.active_worst_quality) >> 5);
if (active_max_gf_interval > cpi->rc.max_gf_interval)
active_max_gf_interval = cpi->rc.max_gf_interval;
i = 0;
while (((i < cpi->twopass.static_scene_max_gf_interval) ||
((cpi->twopass.frames_to_key - i) < MIN_GF_INTERVAL)) &&
(i < cpi->twopass.frames_to_key)) {
i++; // Increment the loop counter
// Accumulate error score of frames in this gf group
mod_frame_err = calculate_modified_err(cpi, this_frame);
gf_group_err += mod_frame_err;
if (EOF == input_stats(cpi, &next_frame))
break;
// Test for the case where there is a brief flash but the prediction
// quality back to an earlier frame is then restored.
flash_detected = detect_flash(cpi, 0);
// Update the motion related elements to the boost calculation
accumulate_frame_motion_stats(&next_frame,
&this_frame_mv_in_out, &mv_in_out_accumulator,
&abs_mv_in_out_accumulator,
&mv_ratio_accumulator);
// Cumulative effect of prediction quality decay
if (!flash_detected) {
last_loop_decay_rate = loop_decay_rate;
loop_decay_rate = get_prediction_decay_rate(cpi, &next_frame);
decay_accumulator = decay_accumulator * loop_decay_rate;
// Monitor for static sections.
if ((next_frame.pcnt_inter - next_frame.pcnt_motion) <
zero_motion_accumulator) {
zero_motion_accumulator =
(next_frame.pcnt_inter - next_frame.pcnt_motion);
}
// Break clause to detect very still sections after motion
// (for example a static image after a fade or other transition).
if (detect_transition_to_still(cpi, i, 5, loop_decay_rate,
last_loop_decay_rate)) {
allow_alt_ref = 0;
break;
}
}
// Calculate a boost number for this frame
boost_score +=
(decay_accumulator *
calc_frame_boost(cpi, &next_frame, this_frame_mv_in_out));
// Break out conditions.
if (
// Break at cpi->max_gf_interval unless almost totally static
(i >= active_max_gf_interval && (zero_motion_accumulator < 0.995)) ||
(
// Don't break out with a very short interval
(i > MIN_GF_INTERVAL) &&
// Don't break out very close to a key frame
((cpi->twopass.frames_to_key - i) >= MIN_GF_INTERVAL) &&
((boost_score > 125.0) || (next_frame.pcnt_inter < 0.75)) &&
(!flash_detected) &&
((mv_ratio_accumulator > mv_ratio_accumulator_thresh) ||
(abs_mv_in_out_accumulator > 3.0) ||
(mv_in_out_accumulator < -2.0) ||
((boost_score - old_boost_score) < IIFACTOR)))) {
boost_score = old_boost_score;
break;
}
*this_frame = next_frame;
old_boost_score = boost_score;
}
cpi->gf_zeromotion_pct = (int)(zero_motion_accumulator * 1000.0);
// Don't allow a gf too near the next kf
if ((cpi->twopass.frames_to_key - i) < MIN_GF_INTERVAL) {
while (i < cpi->twopass.frames_to_key) {
i++;
if (EOF == input_stats(cpi, this_frame))
break;
if (i < cpi->twopass.frames_to_key) {
mod_frame_err = calculate_modified_err(cpi, this_frame);
gf_group_err += mod_frame_err;
}
}
}
// Set the interval until the next gf or arf.
cpi->rc.baseline_gf_interval = i;
#if CONFIG_MULTIPLE_ARF
if (cpi->multi_arf_enabled) {
// Initialize frame coding order variables.
cpi->new_frame_coding_order_period = 0;
cpi->next_frame_in_order = 0;
cpi->arf_buffered = 0;
vp9_zero(cpi->frame_coding_order);
vp9_zero(cpi->arf_buffer_idx);
vpx_memset(cpi->arf_weight, -1, sizeof(cpi->arf_weight));
}
#endif
// Should we use the alternate reference frame
if (allow_alt_ref &&
(i < cpi->oxcf.lag_in_frames) &&
(i >= MIN_GF_INTERVAL) &&
// dont use ARF very near next kf
(i <= (cpi->twopass.frames_to_key - MIN_GF_INTERVAL)) &&
((next_frame.pcnt_inter > 0.75) ||
(next_frame.pcnt_second_ref > 0.5)) &&
((mv_in_out_accumulator / (double)i > -0.2) ||
(mv_in_out_accumulator > -2.0)) &&
(boost_score > 100)) {
// Alternative boost calculation for alt ref
cpi->rc.gfu_boost = calc_arf_boost(cpi, 0, (i - 1), (i - 1), &f_boost,
&b_boost);
cpi->source_alt_ref_pending = 1;
#if CONFIG_MULTIPLE_ARF
// Set the ARF schedule.
if (cpi->multi_arf_enabled) {
schedule_frames(cpi, 0, -(cpi->rc.baseline_gf_interval - 1), 2, 1, 0);
}
#endif
} else {
cpi->rc.gfu_boost = (int)boost_score;
cpi->source_alt_ref_pending = 0;
#if CONFIG_MULTIPLE_ARF
// Set the GF schedule.
if (cpi->multi_arf_enabled) {
schedule_frames(cpi, 0, cpi->rc.baseline_gf_interval - 1, 2, 0, 0);
assert(cpi->new_frame_coding_order_period ==
cpi->rc.baseline_gf_interval);
}
#endif
}
#if CONFIG_MULTIPLE_ARF
if (cpi->multi_arf_enabled && (cpi->common.frame_type != KEY_FRAME)) {
int max_level = INT_MIN;
// Replace level indicator of -1 with correct level.
for (i = 0; i < cpi->frame_coding_order_period; ++i) {
if (cpi->arf_weight[i] > max_level) {
max_level = cpi->arf_weight[i];
}
}
++max_level;
for (i = 0; i < cpi->frame_coding_order_period; ++i) {
if (cpi->arf_weight[i] == -1) {
cpi->arf_weight[i] = max_level;
}
}
cpi->max_arf_level = max_level;
}
#if 0
if (cpi->multi_arf_enabled) {
printf("\nSchedule: ");
for (i = 0; i < cpi->new_frame_coding_order_period; ++i) {
printf("%4d ", cpi->frame_coding_order[i]);
}
printf("\n");
printf("ARFref: ");
for (i = 0; i < cpi->new_frame_coding_order_period; ++i) {
printf("%4d ", cpi->arf_buffer_idx[i]);
}
printf("\n");
printf("Weight: ");
for (i = 0; i < cpi->new_frame_coding_order_period; ++i) {
printf("%4d ", cpi->arf_weight[i]);
}
printf("\n");
}
#endif
#endif
// Now decide how many bits should be allocated to the GF group as a
// proportion of those remaining in the kf group.
// The final key frame group in the clip is treated as a special case
// where cpi->twopass.kf_group_bits is tied to cpi->twopass.bits_left.
// This is also important for short clips where there may only be one
// key frame.
if (cpi->twopass.frames_to_key >= (int)(cpi->twopass.total_stats.count -
cpi->common.current_video_frame)) {
cpi->twopass.kf_group_bits =
(cpi->twopass.bits_left > 0) ? cpi->twopass.bits_left : 0;
}
// Calculate the bits to be allocated to the group as a whole
if ((cpi->twopass.kf_group_bits > 0) &&
(cpi->twopass.kf_group_error_left > 0)) {
cpi->twopass.gf_group_bits =
(int64_t)(cpi->twopass.kf_group_bits *
(gf_group_err / cpi->twopass.kf_group_error_left));
} else {
cpi->twopass.gf_group_bits = 0;
}
cpi->twopass.gf_group_bits =
(cpi->twopass.gf_group_bits < 0)
? 0
: (cpi->twopass.gf_group_bits > cpi->twopass.kf_group_bits)
? cpi->twopass.kf_group_bits : cpi->twopass.gf_group_bits;
// Clip cpi->twopass.gf_group_bits based on user supplied data rate
// variability limit (cpi->oxcf.two_pass_vbrmax_section)
if (cpi->twopass.gf_group_bits >
(int64_t)max_bits * cpi->rc.baseline_gf_interval)
cpi->twopass.gf_group_bits =
(int64_t)max_bits * cpi->rc.baseline_gf_interval;
// Reset the file position
reset_fpf_position(cpi, start_pos);
// Update the record of error used so far (only done once per gf group)
cpi->twopass.modified_error_used += gf_group_err;
// Assign bits to the arf or gf.
for (i = 0;
i <= (cpi->source_alt_ref_pending && cpi->common.frame_type != KEY_FRAME);
++i) {
int allocation_chunks;
int q = cpi->rc.last_q[INTER_FRAME];
int gf_bits;
int boost = (cpi->rc.gfu_boost * gfboost_qadjust(q)) / 100;
// Set max and minimum boost and hence minimum allocation
boost = clamp(boost, 125, (cpi->rc.baseline_gf_interval + 1) * 200);
if (cpi->source_alt_ref_pending && i == 0)
allocation_chunks = ((cpi->rc.baseline_gf_interval + 1) * 100) + boost;
else
allocation_chunks = (cpi->rc.baseline_gf_interval * 100) + (boost - 100);
// Prevent overflow
if (boost > 1023) {
int divisor = boost >> 10;
boost /= divisor;
allocation_chunks /= divisor;
}
// Calculate the number of bits to be spent on the gf or arf based on
// the boost number
gf_bits = (int)((double)boost * (cpi->twopass.gf_group_bits /
(double)allocation_chunks));
// If the frame that is to be boosted is simpler than the average for
// the gf/arf group then use an alternative calculation
// based on the error score of the frame itself
if (mod_frame_err < gf_group_err / (double)cpi->rc.baseline_gf_interval) {
double alt_gf_grp_bits =
(double)cpi->twopass.kf_group_bits *
(mod_frame_err * (double)cpi->rc.baseline_gf_interval) /
DOUBLE_DIVIDE_CHECK(cpi->twopass.kf_group_error_left);
int alt_gf_bits = (int)((double)boost * (alt_gf_grp_bits /
(double)allocation_chunks));
if (gf_bits > alt_gf_bits)
gf_bits = alt_gf_bits;
} else {
// If it is harder than other frames in the group make sure it at
// least receives an allocation in keeping with its relative error
// score, otherwise it may be worse off than an "un-boosted" frame.
int alt_gf_bits = (int)((double)cpi->twopass.kf_group_bits *
mod_frame_err /
DOUBLE_DIVIDE_CHECK(cpi->twopass.kf_group_error_left));
if (alt_gf_bits > gf_bits)
gf_bits = alt_gf_bits;
}
// Dont allow a negative value for gf_bits
if (gf_bits < 0)
gf_bits = 0;
// Add in minimum for a frame
gf_bits += cpi->rc.min_frame_bandwidth;
if (i == 0) {
cpi->twopass.gf_bits = gf_bits;
}
if (i == 1 || (!cpi->source_alt_ref_pending
&& (cpi->common.frame_type != KEY_FRAME))) {
// Per frame bit target for this frame
cpi->rc.per_frame_bandwidth = gf_bits;
}
}
{
// Adjust KF group bits and error remaining
cpi->twopass.kf_group_error_left -= (int64_t)gf_group_err;
cpi->twopass.kf_group_bits -= cpi->twopass.gf_group_bits;
if (cpi->twopass.kf_group_bits < 0)
cpi->twopass.kf_group_bits = 0;
// Note the error score left in the remaining frames of the group.
// For normal GFs we want to remove the error score for the first frame
// of the group (except in Key frame case where this has already
// happened)
if (!cpi->source_alt_ref_pending && cpi->common.frame_type != KEY_FRAME)
cpi->twopass.gf_group_error_left = (int64_t)(gf_group_err
- gf_first_frame_err);
else
cpi->twopass.gf_group_error_left = (int64_t)gf_group_err;
cpi->twopass.gf_group_bits -= cpi->twopass.gf_bits
- cpi->rc.min_frame_bandwidth;
if (cpi->twopass.gf_group_bits < 0)
cpi->twopass.gf_group_bits = 0;
// This condition could fail if there are two kfs very close together
// despite (MIN_GF_INTERVAL) and would cause a divide by 0 in the
// calculation of alt_extra_bits.
if (cpi->rc.baseline_gf_interval >= 3) {
const int boost = cpi->source_alt_ref_pending ?
b_boost : cpi->rc.gfu_boost;
if (boost >= 150) {
int alt_extra_bits;
int pct_extra = (boost - 100) / 50;
pct_extra = (pct_extra > 20) ? 20 : pct_extra;
alt_extra_bits = (int)((cpi->twopass.gf_group_bits * pct_extra) / 100);
cpi->twopass.gf_group_bits -= alt_extra_bits;
}
}
}
if (cpi->common.frame_type != KEY_FRAME) {
FIRSTPASS_STATS sectionstats;
zero_stats(&sectionstats);
reset_fpf_position(cpi, start_pos);
for (i = 0; i < cpi->rc.baseline_gf_interval; i++) {
input_stats(cpi, &next_frame);
accumulate_stats(&sectionstats, &next_frame);
}
avg_stats(&sectionstats);
cpi->twopass.section_intra_rating = (int)
(sectionstats.intra_error /
DOUBLE_DIVIDE_CHECK(sectionstats.coded_error));
reset_fpf_position(cpi, start_pos);
}
}
// Allocate bits to a normal frame that is neither a gf an arf or a key frame.
static void assign_std_frame_bits(VP9_COMP *cpi, FIRSTPASS_STATS *this_frame) {
int target_frame_size;
double modified_err;
double err_fraction;
// Max for a single frame.
int max_bits = frame_max_bits(cpi);
// Calculate modified prediction error used in bit allocation.
modified_err = calculate_modified_err(cpi, this_frame);
if (cpi->twopass.gf_group_error_left > 0)
// What portion of the remaining GF group error is used by this frame.
err_fraction = modified_err / cpi->twopass.gf_group_error_left;
else
err_fraction = 0.0;
// How many of those bits available for allocation should we give it?
target_frame_size = (int)((double)cpi->twopass.gf_group_bits * err_fraction);
// Clip target size to 0 - max_bits (or cpi->twopass.gf_group_bits) at
// the top end.
if (target_frame_size < 0) {
target_frame_size = 0;
} else {
if (target_frame_size > max_bits)
target_frame_size = max_bits;
if (target_frame_size > cpi->twopass.gf_group_bits)
target_frame_size = (int)cpi->twopass.gf_group_bits;
}
// Adjust error and bits remaining.
cpi->twopass.gf_group_error_left -= (int64_t)modified_err;
cpi->twopass.gf_group_bits -= target_frame_size;
if (cpi->twopass.gf_group_bits < 0)
cpi->twopass.gf_group_bits = 0;
// Add in the minimum number of bits that is set aside for every frame.
target_frame_size += cpi->rc.min_frame_bandwidth;
// Per frame bit target for this frame.
cpi->rc.per_frame_bandwidth = target_frame_size;
}
// Make a damped adjustment to the active max q.
static int adjust_active_maxq(int old_maxqi, int new_maxqi) {
int i;
const double old_q = vp9_convert_qindex_to_q(old_maxqi);
const double new_q = vp9_convert_qindex_to_q(new_maxqi);
const double target_q = ((old_q * 7.0) + new_q) / 8.0;
if (target_q > old_q) {
for (i = old_maxqi; i <= new_maxqi; i++)
if (vp9_convert_qindex_to_q(i) >= target_q)
return i;
} else {
for (i = old_maxqi; i >= new_maxqi; i--)
if (vp9_convert_qindex_to_q(i) <= target_q)
return i;
}
return new_maxqi;
}
void vp9_second_pass(VP9_COMP *cpi) {
int tmp_q;
int frames_left = (int)(cpi->twopass.total_stats.count -
cpi->common.current_video_frame);
FIRSTPASS_STATS this_frame;
FIRSTPASS_STATS this_frame_copy;
double this_frame_intra_error;
double this_frame_coded_error;
if (!cpi->twopass.stats_in)
return;
vp9_clear_system_state();
if (cpi->oxcf.end_usage == USAGE_CONSTANT_QUALITY) {
cpi->rc.active_worst_quality = cpi->oxcf.cq_level;
} else if (cpi->common.current_video_frame == 0) {
// Special case code for first frame.
int section_target_bandwidth =
(int)(cpi->twopass.bits_left / frames_left);
// guess at maxq needed in 2nd pass
cpi->twopass.maxq_max_limit = cpi->rc.worst_quality;
cpi->twopass.maxq_min_limit = cpi->rc.best_quality;
tmp_q = estimate_max_q(cpi, &cpi->twopass.total_left_stats,
section_target_bandwidth);
cpi->rc.active_worst_quality = tmp_q;
cpi->rc.ni_av_qi = tmp_q;
cpi->rc.avg_q = vp9_convert_qindex_to_q(tmp_q);
// Limit the maxq value returned subsequently.
// This increases the risk of overspend or underspend if the initial
// estimate for the clip is bad, but helps prevent excessive
// variation in Q, especially near the end of a clip
// where for example a small overspend may cause Q to crash
adjust_maxq_qrange(cpi);
}
vp9_zero(this_frame);
if (EOF == input_stats(cpi, &this_frame))
return;
this_frame_intra_error = this_frame.intra_error;
this_frame_coded_error = this_frame.coded_error;
// keyframe and section processing !
if (cpi->twopass.frames_to_key == 0) {
// Define next KF group and assign bits to it
this_frame_copy = this_frame;
find_next_key_frame(cpi, &this_frame_copy);
}
// Is this a GF / ARF (Note that a KF is always also a GF)
if (cpi->rc.frames_till_gf_update_due == 0) {
// Define next gf group and assign bits to it
this_frame_copy = this_frame;
cpi->gf_zeromotion_pct = 0;
#if CONFIG_MULTIPLE_ARF
if (cpi->multi_arf_enabled) {
define_fixed_arf_period(cpi);
} else {
#endif
define_gf_group(cpi, &this_frame_copy);
#if CONFIG_MULTIPLE_ARF
}
#endif
if (cpi->gf_zeromotion_pct > 995) {
// As long as max_thresh for encode breakout is small enough, it is ok
// to enable it for no-show frame, i.e. set enable_encode_breakout to 2.
if (!cpi->common.show_frame)
cpi->enable_encode_breakout = 0;
else
cpi->enable_encode_breakout = 2;
}
// If we are going to code an altref frame at the end of the group
// and the current frame is not a key frame....
// If the previous group used an arf this frame has already benefited
// from that arf boost and it should not be given extra bits
// If the previous group was NOT coded using arf we may want to apply
// some boost to this GF as well
if (cpi->source_alt_ref_pending && (cpi->common.frame_type != KEY_FRAME)) {
// Assign a standard frames worth of bits from those allocated
// to the GF group
int bak = cpi->rc.per_frame_bandwidth;
this_frame_copy = this_frame;
assign_std_frame_bits(cpi, &this_frame_copy);
cpi->rc.per_frame_bandwidth = bak;
}
} else {
// Otherwise this is an ordinary frame
// Assign bits from those allocated to the GF group
this_frame_copy = this_frame;
assign_std_frame_bits(cpi, &this_frame_copy);
}
// Keep a globally available copy of this and the next frame's iiratio.
cpi->twopass.this_iiratio = (int)(this_frame_intra_error /
DOUBLE_DIVIDE_CHECK(this_frame_coded_error));
{
FIRSTPASS_STATS next_frame;
if (lookup_next_frame_stats(cpi, &next_frame) != EOF) {
cpi->twopass.next_iiratio = (int)(next_frame.intra_error /
DOUBLE_DIVIDE_CHECK(next_frame.coded_error));
}
}
// Set nominal per second bandwidth for this frame
cpi->target_bandwidth = (int)(cpi->rc.per_frame_bandwidth
* cpi->output_framerate);
if (cpi->target_bandwidth < 0)
cpi->target_bandwidth = 0;
cpi->twopass.frames_to_key--;
// Update the total stats remaining structure
subtract_stats(&cpi->twopass.total_left_stats, &this_frame);
}
static int test_candidate_kf(VP9_COMP *cpi,
FIRSTPASS_STATS *last_frame,
FIRSTPASS_STATS *this_frame,
FIRSTPASS_STATS *next_frame) {
int is_viable_kf = 0;
// Does the frame satisfy the primary criteria of a key frame
// If so, then examine how well it predicts subsequent frames
if ((this_frame->pcnt_second_ref < 0.10) &&
(next_frame->pcnt_second_ref < 0.10) &&
((this_frame->pcnt_inter < 0.05) ||
(((this_frame->pcnt_inter - this_frame->pcnt_neutral) < .35) &&
((this_frame->intra_error /
DOUBLE_DIVIDE_CHECK(this_frame->coded_error)) < 2.5) &&
((fabs(last_frame->coded_error - this_frame->coded_error) /
DOUBLE_DIVIDE_CHECK(this_frame->coded_error) >
.40) ||
(fabs(last_frame->intra_error - this_frame->intra_error) /
DOUBLE_DIVIDE_CHECK(this_frame->intra_error) >
.40) ||
((next_frame->intra_error /
DOUBLE_DIVIDE_CHECK(next_frame->coded_error)) > 3.5))))) {
int i;
FIRSTPASS_STATS *start_pos;
FIRSTPASS_STATS local_next_frame;
double boost_score = 0.0;
double old_boost_score = 0.0;
double decay_accumulator = 1.0;
double next_iiratio;
local_next_frame = *next_frame;
// Note the starting file position so we can reset to it
start_pos = cpi->twopass.stats_in;
// Examine how well the key frame predicts subsequent frames
for (i = 0; i < 16; i++) {
next_iiratio = (IIKFACTOR1 * local_next_frame.intra_error /
DOUBLE_DIVIDE_CHECK(local_next_frame.coded_error));
if (next_iiratio > RMAX)
next_iiratio = RMAX;
// Cumulative effect of decay in prediction quality
if (local_next_frame.pcnt_inter > 0.85)
decay_accumulator = decay_accumulator * local_next_frame.pcnt_inter;
else
decay_accumulator =
decay_accumulator * ((0.85 + local_next_frame.pcnt_inter) / 2.0);
// decay_accumulator = decay_accumulator * local_next_frame.pcnt_inter;
// Keep a running total
boost_score += (decay_accumulator * next_iiratio);
// Test various breakout clauses
if ((local_next_frame.pcnt_inter < 0.05) ||
(next_iiratio < 1.5) ||
(((local_next_frame.pcnt_inter -
local_next_frame.pcnt_neutral) < 0.20) &&
(next_iiratio < 3.0)) ||
((boost_score - old_boost_score) < 3.0) ||
(local_next_frame.intra_error < 200)
) {
break;
}
old_boost_score = boost_score;
// Get the next frame details
if (EOF == input_stats(cpi, &local_next_frame))
break;
}
// If there is tolerable prediction for at least the next 3 frames then
// break out else discard this potential key frame and move on
if (boost_score > 30.0 && (i > 3)) {
is_viable_kf = 1;
} else {
// Reset the file position
reset_fpf_position(cpi, start_pos);
is_viable_kf = 0;
}
}
return is_viable_kf;
}
static void find_next_key_frame(VP9_COMP *cpi, FIRSTPASS_STATS *this_frame) {
int i, j;
FIRSTPASS_STATS last_frame;
FIRSTPASS_STATS first_frame;
FIRSTPASS_STATS next_frame;
FIRSTPASS_STATS *start_position;
double decay_accumulator = 1.0;
double zero_motion_accumulator = 1.0;
double boost_score = 0;
double loop_decay_rate;
double kf_mod_err = 0.0;
double kf_group_err = 0.0;
double kf_group_intra_err = 0.0;
double kf_group_coded_err = 0.0;
double recent_loop_decay[8] = {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0};
vp9_zero(next_frame);
vp9_clear_system_state(); // __asm emms;
start_position = cpi->twopass.stats_in;
cpi->common.frame_type = KEY_FRAME;
// is this a forced key frame by interval
cpi->this_key_frame_forced = cpi->next_key_frame_forced;
// Clear the alt ref active flag as this can never be active on a key frame
cpi->source_alt_ref_active = 0;
// Kf is always a gf so clear frames till next gf counter
cpi->rc.frames_till_gf_update_due = 0;
cpi->twopass.frames_to_key = 1;
// Take a copy of the initial frame details
first_frame = *this_frame;
cpi->twopass.kf_group_bits = 0; // Total bits available to kf group
cpi->twopass.kf_group_error_left = 0; // Group modified error score.
kf_mod_err = calculate_modified_err(cpi, this_frame);
// find the next keyframe
i = 0;
while (cpi->twopass.stats_in < cpi->twopass.stats_in_end) {
// Accumulate kf group error
kf_group_err += calculate_modified_err(cpi, this_frame);
// These figures keep intra and coded error counts for all frames including
// key frames in the group. The effect of the key frame itself can be
// subtracted out using the first_frame data collected above.
kf_group_intra_err += this_frame->intra_error;
kf_group_coded_err += this_frame->coded_error;
// load a the next frame's stats
last_frame = *this_frame;
input_stats(cpi, this_frame);
// Provided that we are not at the end of the file...
if (cpi->oxcf.auto_key
&& lookup_next_frame_stats(cpi, &next_frame) != EOF) {
// Normal scene cut check
if (test_candidate_kf(cpi, &last_frame, this_frame, &next_frame))
break;
// How fast is prediction quality decaying
loop_decay_rate = get_prediction_decay_rate(cpi, &next_frame);
// We want to know something about the recent past... rather than
// as used elsewhere where we are concened with decay in prediction
// quality since the last GF or KF.
recent_loop_decay[i % 8] = loop_decay_rate;
decay_accumulator = 1.0;
for (j = 0; j < 8; j++)
decay_accumulator *= recent_loop_decay[j];
// Special check for transition or high motion followed by a
// to a static scene.
if (detect_transition_to_still(cpi, i, cpi->key_frame_frequency - i,
loop_decay_rate, decay_accumulator))
break;
// Step on to the next frame
cpi->twopass.frames_to_key++;
// If we don't have a real key frame within the next two
// forcekeyframeevery intervals then break out of the loop.
if (cpi->twopass.frames_to_key >= 2 * (int)cpi->key_frame_frequency)
break;
} else {
cpi->twopass.frames_to_key++;
}
i++;
}
// If there is a max kf interval set by the user we must obey it.
// We already breakout of the loop above at 2x max.
// This code centers the extra kf if the actual natural
// interval is between 1x and 2x
if (cpi->oxcf.auto_key
&& cpi->twopass.frames_to_key > (int)cpi->key_frame_frequency) {
FIRSTPASS_STATS *current_pos = cpi->twopass.stats_in;
FIRSTPASS_STATS tmp_frame;
cpi->twopass.frames_to_key /= 2;
// Copy first frame details
tmp_frame = first_frame;
// Reset to the start of the group
reset_fpf_position(cpi, start_position);
kf_group_err = 0;
kf_group_intra_err = 0;
kf_group_coded_err = 0;
// Rescan to get the correct error data for the forced kf group
for (i = 0; i < cpi->twopass.frames_to_key; i++) {
// Accumulate kf group errors
kf_group_err += calculate_modified_err(cpi, &tmp_frame);
kf_group_intra_err += tmp_frame.intra_error;
kf_group_coded_err += tmp_frame.coded_error;
// Load a the next frame's stats
input_stats(cpi, &tmp_frame);
}
// Reset to the start of the group
reset_fpf_position(cpi, current_pos);
cpi->next_key_frame_forced = 1;
} else {
cpi->next_key_frame_forced = 0;
}
// Special case for the last frame of the file
if (cpi->twopass.stats_in >= cpi->twopass.stats_in_end) {
// Accumulate kf group error
kf_group_err += calculate_modified_err(cpi, this_frame);
// These figures keep intra and coded error counts for all frames including
// key frames in the group. The effect of the key frame itself can be
// subtracted out using the first_frame data collected above.
kf_group_intra_err += this_frame->intra_error;
kf_group_coded_err += this_frame->coded_error;
}
// Calculate the number of bits that should be assigned to the kf group.
if ((cpi->twopass.bits_left > 0) &&
(cpi->twopass.modified_error_left > 0.0)) {
// Max for a single normal frame (not key frame)
int max_bits = frame_max_bits(cpi);
// Maximum bits for the kf group
int64_t max_grp_bits;
// Default allocation based on bits left and relative
// complexity of the section
cpi->twopass.kf_group_bits = (int64_t)(cpi->twopass.bits_left *
(kf_group_err /
cpi->twopass.modified_error_left));
// Clip based on maximum per frame rate defined by the user.
max_grp_bits = (int64_t)max_bits * (int64_t)cpi->twopass.frames_to_key;
if (cpi->twopass.kf_group_bits > max_grp_bits)
cpi->twopass.kf_group_bits = max_grp_bits;
} else {
cpi->twopass.kf_group_bits = 0;
}
// Reset the first pass file position
reset_fpf_position(cpi, start_position);
// Determine how big to make this keyframe based on how well the subsequent
// frames use inter blocks.
decay_accumulator = 1.0;
boost_score = 0.0;
loop_decay_rate = 1.00; // Starting decay rate
// Scan through the kf group collating various stats.
for (i = 0; i < cpi->twopass.frames_to_key; i++) {
double r;
if (EOF == input_stats(cpi, &next_frame))
break;
// Monitor for static sections.
if ((next_frame.pcnt_inter - next_frame.pcnt_motion) <
zero_motion_accumulator) {
zero_motion_accumulator =
(next_frame.pcnt_inter - next_frame.pcnt_motion);
}
// For the first few frames collect data to decide kf boost.
if (i <= (cpi->rc.max_gf_interval * 2)) {
if (next_frame.intra_error > cpi->twopass.kf_intra_err_min)
r = (IIKFACTOR2 * next_frame.intra_error /
DOUBLE_DIVIDE_CHECK(next_frame.coded_error));
else
r = (IIKFACTOR2 * cpi->twopass.kf_intra_err_min /
DOUBLE_DIVIDE_CHECK(next_frame.coded_error));
if (r > RMAX)
r = RMAX;
// How fast is prediction quality decaying
if (!detect_flash(cpi, 0)) {
loop_decay_rate = get_prediction_decay_rate(cpi, &next_frame);
decay_accumulator = decay_accumulator * loop_decay_rate;
decay_accumulator = decay_accumulator < MIN_DECAY_FACTOR
? MIN_DECAY_FACTOR : decay_accumulator;
}
boost_score += (decay_accumulator * r);
}
}
{
FIRSTPASS_STATS sectionstats;
zero_stats(&sectionstats);
reset_fpf_position(cpi, start_position);
for (i = 0; i < cpi->twopass.frames_to_key; i++) {
input_stats(cpi, &next_frame);
accumulate_stats(&sectionstats, &next_frame);
}
avg_stats(&sectionstats);
cpi->twopass.section_intra_rating = (int)
(sectionstats.intra_error
/ DOUBLE_DIVIDE_CHECK(sectionstats.coded_error));
}
// Reset the first pass file position
reset_fpf_position(cpi, start_position);
// Work out how many bits to allocate for the key frame itself
if (1) {
int kf_boost = (int)boost_score;
int allocation_chunks;
int alt_kf_bits;
if (kf_boost < (cpi->twopass.frames_to_key * 3))
kf_boost = (cpi->twopass.frames_to_key * 3);
if (kf_boost < 300) // Min KF boost
kf_boost = 300;
// Make a note of baseline boost and the zero motion
// accumulator value for use elsewhere.
cpi->rc.kf_boost = kf_boost;
cpi->kf_zeromotion_pct = (int)(zero_motion_accumulator * 100.0);
// We do three calculations for kf size.
// The first is based on the error score for the whole kf group.
// The second (optionaly) on the key frames own error if this is
// smaller than the average for the group.
// The final one insures that the frame receives at least the
// allocation it would have received based on its own error score vs
// the error score remaining
// Special case if the sequence appears almost totaly static
// In this case we want to spend almost all of the bits on the
// key frame.
// cpi->twopass.frames_to_key-1 because key frame itself is taken
// care of by kf_boost.
if (zero_motion_accumulator >= 0.99) {
allocation_chunks =
((cpi->twopass.frames_to_key - 1) * 10) + kf_boost;
} else {
allocation_chunks =
((cpi->twopass.frames_to_key - 1) * 100) + kf_boost;
}
// Prevent overflow
if (kf_boost > 1028) {
int divisor = kf_boost >> 10;
kf_boost /= divisor;
allocation_chunks /= divisor;
}
cpi->twopass.kf_group_bits =
(cpi->twopass.kf_group_bits < 0) ? 0 : cpi->twopass.kf_group_bits;
// Calculate the number of bits to be spent on the key frame
cpi->twopass.kf_bits =
(int)((double)kf_boost *
((double)cpi->twopass.kf_group_bits / (double)allocation_chunks));
// If the key frame is actually easier than the average for the
// kf group (which does sometimes happen... eg a blank intro frame)
// Then use an alternate calculation based on the kf error score
// which should give a smaller key frame.
if (kf_mod_err < kf_group_err / cpi->twopass.frames_to_key) {
double alt_kf_grp_bits =
((double)cpi->twopass.bits_left *
(kf_mod_err * (double)cpi->twopass.frames_to_key) /
DOUBLE_DIVIDE_CHECK(cpi->twopass.modified_error_left));
alt_kf_bits = (int)((double)kf_boost *
(alt_kf_grp_bits / (double)allocation_chunks));
if (cpi->twopass.kf_bits > alt_kf_bits) {
cpi->twopass.kf_bits = alt_kf_bits;
}
} else {
// Else if it is much harder than other frames in the group make sure
// it at least receives an allocation in keeping with its relative
// error score
alt_kf_bits =
(int)((double)cpi->twopass.bits_left *
(kf_mod_err /
DOUBLE_DIVIDE_CHECK(cpi->twopass.modified_error_left)));
if (alt_kf_bits > cpi->twopass.kf_bits) {
cpi->twopass.kf_bits = alt_kf_bits;
}
}
cpi->twopass.kf_group_bits -= cpi->twopass.kf_bits;
// Add in the minimum frame allowance
cpi->twopass.kf_bits += cpi->rc.min_frame_bandwidth;
// Peer frame bit target for this frame
cpi->rc.per_frame_bandwidth = cpi->twopass.kf_bits;
// Convert to a per second bitrate
cpi->target_bandwidth = (int)(cpi->twopass.kf_bits *
cpi->output_framerate);
}
// Note the total error score of the kf group minus the key frame itself
cpi->twopass.kf_group_error_left = (int)(kf_group_err - kf_mod_err);
// Adjust the count of total modified error left.
// The count of bits left is adjusted elsewhere based on real coded frame
// sizes.
cpi->twopass.modified_error_left -= kf_group_err;
}
void vp9_twopass_postencode_update(VP9_COMP *cpi, uint64_t bytes_used) {
#ifdef DISABLE_RC_LONG_TERM_MEM
cpi->twopass.bits_left -= cpi->rc.this_frame_target;
#else
cpi->twopass.bits_left -= 8 * bytes_used;
#endif
if (!cpi->refresh_alt_ref_frame) {
double lower_bounds_min_rate = FRAME_OVERHEAD_BITS * cpi->oxcf.framerate;
double two_pass_min_rate = (double)(cpi->oxcf.target_bandwidth *
cpi->oxcf.two_pass_vbrmin_section
/ 100);
if (two_pass_min_rate < lower_bounds_min_rate)
two_pass_min_rate = lower_bounds_min_rate;
cpi->twopass.bits_left += (int64_t)(two_pass_min_rate /
cpi->oxcf.framerate);
}
}
Reference in New Issue View Git Blame Copy Permalink