Key frame macrobock and block mode probabilities are constant.
Remove the allocation of tables for each codec instance and use
instead the default const prob tables.
Change-Id: I8361798ac491f9b3889e86925a494c58647c753f
Look for changes in the codec's configured w/h instead of its active
w/h when forcing keyframes. Otherwise calls to vp8_change_config()
will force a keyframe when spatial resampling is active.
Change-Id: Ie0d20e70507004e714ad40b640aa5b434251eb32
This commit changed to enable the usage 8x8 transform for all frame
type, all resolution and all quantizer range. This has an overall
benefit .2% to .3% in term of compression, but more importantly,
the difficult clips benefits much more, up to 2% to 3% on clips
like football, harbour and so on.
We observed some weird humps on very high end on a couple of youtube
clips, but have determined the underly cause was the aggressive zbin
having an effect of lowering rate with lower quality, which have
an impact on slide show clips around 60DB.
The commit does not change the association between prediction mode
and transform size.
Change-Id: I33043bdce6207528ae00b4a4b26d8ff63cfea1f4
This is to prevent the evaluation of a mode from using values left
over from a mode evaluated prior in the loop.
Change-Id: Ife2c6ceb76d2f7365fd262515d3ae48229033c2d
We can get rid of all remaining global initializers now:
vp8_scale_machine_specific_config()
vp8_initialize()
vp8dx_initialize()
Change-Id: I2825cea5d1c01ad9f6c45df49a0f86d803bfeb69
Mode token tabels precalculated in entropymode.c.
Removes vp8_initialize_common()as all common global data
is precalculated const now.
Change-Id: I9b2ccc883e4f618069e1bc180dad3a823394eb73
With the NEWENTROPY experiment enabled encoding certain clips
produced invlid bitstreams, or files that had a high degree
of artefacts.
This was the results of pointers in MACROBLOCKD not being
setup correctly (mode_info_context and prev_mode_info_context).
Change-Id: Ice13e1efa8bd122997d2f8f3f1e761c6c16e0403
These contexts need to be saved and restored for recode, otherwise
encoder/decoder mismatch happens for some clips (eg._mobcal 720p)
Change-Id: Ic65cfa0bf56ed0472ecab962ce31394d59d344bf
Removes all runtime initialization of global data in tokenize.c.
DCT token and cost tabels are pre-generated.
Second patch in a series to make sure code is reentrant.
Change-Id: Iab48b5fe290129823947b669413101f22a1bcac0
Removes all runtime initialization of global data in entropy.c.
Precalculated values are used for initializing all entropy related
tabels.
First patch in a series to make sure code is reentrant.
Change-Id: I9aac91a2a26f96d73c6470d772a343df63bfe633
When producing an invisible ARF, the time stamp counters aren't
updated since the last time stamp is seen by the codec twice. The
prior code was trapping this case with refresh_alt_ref, but this isn't
correct for other uses of the ARF. Instead, use the show_frame flag.
Change-Id: If67fff7c6c66a3606698e34e2fb5731f56b4a223
Added code to save the coding context in vp8_rd_pick_inter_mode
when the coding mode is forced to ARF(0,0).
Also, modified the MV bounds computation to comply with the
change in MV border from 32 to 64 pixels.
Change-Id: I96963a6f5f4d04ce84c807ae11e0635177c3ad6c
Turning off the interpolation filter selection based on edge
proportion. This heuristics has not been working as well as
expected and I have started a more rigorous investigation into
this. We can turn this off for now since it is unnecessarily
slowing things down.
Rebase.
Change-Id: Ic5958b2b3a35ec2d8eb73b6d81617ca8fbe07e74
This commit tries to address an issue related to the oddity shown on
HD _mobcal clip, where some rather ugly blocks shown in the second
frame at low-mid bit rates if the third frame is not made a key frame
by he encoder. The fixes include: 1) made calls to sad_16x16 to be
consistent with function prototype. 2) remove the error bias to intra
and golden in mbgraph search. 3) changed the error accumulation on
inter_segment encoding to avoid potential out-of-range. 1) has no
effect on encoding results.
Encoding test show that the overall effect of the commit helps about
.2%(HD) to .3%(cif)
Change-Id: I930975a2d0c06252f01c39e0a02351529774e30b
The commit removed a limit on key frame detection, which caused a big
drop in all metric measurements for standard HD clip such as _mobcal.
This single change helps two standard HD clips by a huge amount, which
help the overall std-hd set by 2.4% (glb psnr), 0.9% (avg_psnr), 2.1%
(vpxssim).
In the result page:
http://pafr9.prod.google.com:26163/?/cns/rc-d/home/on2-prod/sunkaras/borg-test/yaowu
2012_04_02_1649_yaowu_bugfix_std-hd
2012_04_03_1452_yaowu_hump_std-hd
represent the encoding test results and std-hd set prior and after this
commit respectively.
Change-Id: Ie4313e317c737ea0e699c3a7919c1376744baa1a
This commit has made macro_block_yrd_8x8 and macro_block_yrd_8x8 to
take same parameters. It also removed a few unnecessary shifts that
has the potential to create out-of-range distortion values.
Change-Id: I4ec5afb307c3685c2a67a07c2850f0927d214455
Some code re-factored / moved to allow the main
pack operation inside the recode loop so that the
size estimate is accurate.
Deletion of some redundant code relating to one pass.
Aproximate improvement over March 27 code base:
Derf 0.0%, YT 0.5%, YThd 0.3% Std_hd 0.25%
Change-Id: Id2d071794ab44f0b52935f6fcdb5733d09a6bb86
Some adjustments to zbin for t8x8.
Changes to rules for sizing forced key frames.
Some extra stats output in tmp.stt.
Approximate gain on YT-hd set 0.5%
There are still issues in sizing key frames and gf/arf frames
when the image is largely static. These in part relate to
problems with cost estimates in the recode loop.
Change-Id: I6f0159dc8a8faeab4115a19c668d442491619a68
This is the first patch to add superblock (32x32) coding
order capabilities. It does not yet do any mode selection
at the SB level, that will follow in a further patch.
This patch encodes rows of SBs rather than
MBs, each SB contains 2x2 MBs.
Two intra prediction modes have been disabled since they
require reconstructed data for the above-right MB which
may not have been encoded yet (e.g. for the bottom right
MB in each SB).
Results on the one test clip I have tried (720p GIPS clip)
suggest that it is somewhere around 0.2dB worse than the
baseline version, so there may be bugs.
It has been tested with no experiments enabled and with
the following 3 experiments enabled:
--enable-enhanced_interp
--enable-high_precision_mv
--enable-sixteenth_subpel_uv
in each case the decode buffer matches the recon buffer
(using "cmp" to compare the dumped/decoded frames).
Note: Testing these experiments individually created
errors.
Some problems were found with other experiments but it
is unclear what state these experiments are in:
--enable-comp_intra_pred
--enable-newentropy
--enable-uvintra
This code has not been extensively tested yet, so there
is every likelihood that further bugs remain. I also
intend to do some code cleanup & refactoring in tandem
with the next patch that adds the 32x32 modes.
Change-Id: I1eba7f740a70b3510df58db53464535ef881b4d9
Found this bug while tracking down some anomalies in my experiments.
Since vp8_cost_one and vp8_cost_zero return unsigned int, the
bit shift by 8 will be incorrect if the value is negative.
I am cautiously optimistic that this fix will make the prob
updates more correct and somewhat improve results across the board.
But the update probabilities will need to be retuned I think.
Patch 2: Adding more of the same fixes using a macro.
Change-Id: I1a168f040e74e8c67e7225103b1c2af9a611da49
Adds logic to disable mfqe for the first frame after a configuration
change such as change in resolution. Also adds some missing
if CONFIG_POSTPROC macro checks.
Change-Id: If29053dad50b676bd29189ab7f9fe250eb5d30b3
When ac_yquant>171, a key frame is enabled to use 8x8 transform. In
such case, MBs with DC_PRED or TM_PRED are selected to use T8x8. This
change helped the full STD-HD set by ~.1% or so, which is reasonable
considering how often key frame occurs in these encodings.
Change-Id: Id17009ef6327252177b19e6bf0d6628827febaf1
Deprecate fast quant and strict_quant code.
Small effect on quality as fast was used in first pass but the
effect is basically neutral across the derf set.
The rationale here is to reduce the number of code paths for
now to make experimentation easier. Optimized and fast code
options can be re-introduced later along with other encode
speed options.
Change-Id: Ia30c5daf3dbc52e72c83b277a1d281e3c934cdad
Various refactoring to make the subpel motion compensation
filters switchable by a frame level field.
Two types of 8-tap filters are supported in addition to the existing
bilinar and sixtap filters. One is the default 8-tap and the
other has a sharper cut-off for use with frames with substantial
edge content.
Patch 2: Added a preliminary strategy for filter selection based on
edginess detecton. Also includes some filter changes.
Change-Id: I866085bda5ae143cfdf2ec88157feaabdf7bd63a
This change added a motion search skipping mechanism similar
to what we did in second pass. For a macroblock that is very
similar to the macroblock at same location on last frame,
we can set its mv to be zero, and skip motion search. This
improves first-pass performance for slide shows and video
conferencing clips with a slight PSNR loss.
Change-Id: Ic73f9ef5604270ddd6d433170091d20361dfe229
The recoding loop save and restore frame coding context for recodes.
However in recoding of key frames, some of the coding context saved
was stale from last encoded inter frame. The save/restore sometimes
overwrites the re-inintialized coding context with saved context
from last frame, resulting in encoder/decoder mismatch
Change-Id: I354ae2f71074d142602d51d06544c05a2462caaf
This issue likely doesn't appear in the unmodified encoder, but
sufficient hacking on the mode selection loop can expose it.
Change-Id: I8a35831e8f08b549806d0c2c6900d42af883f78f
