Commit Graph

160 Commits

Author SHA1 Message Date
Yunqing Wang
04b9e0d787 Fix incorrect use of uv eobs in intra modes
In vp8_rd_pick_inter_mode(), if total of eobs is zero, rate needs
to be adjusted since there are no non-zero coefficients for
transmission. The uv intra eobs calculated in
rd_pick_intra_mbuv_mode() need to be saved before they are
overwritten by inter-mode eobs.

Change-Id: I41dd04fba912e8122ef95793d4d98a251bc60e58
2012-02-17 09:15:08 -05:00
Scott LaVarnway
d8ebdcd89d Moved ref_frame_cost from MACROBLOCKD to MACROBLOCK
Change-Id: I05788522e9cde4322cfb12032483bdbf184bdf0b
2012-02-02 13:40:08 -05:00
Scott LaVarnway
749bc98618 BLOCKD structure cleanup
Removed redundancies.  All of the information can be
found in the MACROBLOCKD structure.

Change-Id: I7556392c6f67b43bef2a5e9932180a737466ef93
2012-01-31 11:02:39 -05:00
John Koleszar
109b69a706 RTCD: add arnr functions
This commit continues the process of converting to the new RTCD
system. It removes the last of the VP8_ENCODER_RTCD struct references.

Change-Id: I2a44f52d7cccf5177e1ca98a028ead570d045395
2012-01-30 12:10:48 -08:00
John Koleszar
be8af188d0 RTCD: add block subtraction functions
This commit continues the process of converting to the new RTCD
system.

Change-Id: Id8a287fdd4bd050ea4452e1582ad85520f3081be
2012-01-30 12:10:47 -08:00
John Koleszar
510e0ab467 RTCD: add FDCT functions
This commit continues the process of converting to the new RTCD
system.

Change-Id: I3f9c07db65eb206f6363d21bdb80e871570da767
2012-01-30 12:10:42 -08:00
John Koleszar
83a91e789c RTCD: add variance functions
This commit continues the process of converting to the new RTCD
system.

Change-Id: Ie5c1aa480637e98dc3918fb562ff45c37a66c538
2012-01-30 12:08:30 -08:00
John Koleszar
fdb61a4531 RTCD: add recon functions
This commit continues the process of converting to the new RTCD
system.

Change-Id: I9bfcf9bef65c3d4ba0fb9a3e1532bad1463a10d6
2012-01-30 12:08:28 -08:00
John Koleszar
ab77b4e898 RTCD: add remaining IDCT functions
This commit continues the process of converting to the new RTCD
system.

Change-Id: I03c4dbf30dfd3558b0e256ff9d3ff4c012aadc80
2012-01-30 12:08:22 -08:00
John Koleszar
83cef816fd Correct clamping in use of vp8_find_near_mvs()
Commit e06c242ba introduced a change to call vp8_find_near_mvs() only
once instead of once per reference frame by observing that the only
effect that the frame had was on the bias applied to the motion
vector. By keeping track of the sign_bias value, the mv to use could
be flip-flopped by multiplying its components by -1.

This behavior was subtley wrong in the case when clamping was applied
to the motion vectors found by vp8_find_near_mvs(). A motion vector
could be in-bounds with one sign bias, but out of bounds after
inverting the sign, or vice versa. The clamping must match that done
by the decoder.

This change modifies vp8_find_near_mvs() to remove the clamping from
that function. The vp8_pick_inter_mode() and vp8_rd_pick_inter_mode()
functions instead track the correctly clamped values for both bias
values, switching between them by simple assignment. The common
clamping and inversion code is in vp8_find_near_mvs_bias()

Change-Id: I17e1a348d1643497eca0be232e2fbe2acf8478e1
2012-01-26 09:37:27 -08:00
John Koleszar
0e06bc817a Merge changes I1ebe76aa,Ia079b52b
* changes:
  rdopt/pickinter: factor out some common setup
  rdopt: remove unused frame_lf_or_gf
2012-01-18 09:30:46 -08:00
John Koleszar
4ade079633 rdopt/pickinter: factor out some common setup
Add new get_predictor_pointers() and get_reference_search_order()
functions for code shared between the two implementations.

Change-Id: I1ebe76aa8f168b1f5cfabc00d05d8f19a0d4d207
2012-01-11 14:43:52 -08:00
John Koleszar
bd5bfd94b8 rdopt: remove unused frame_lf_or_gf
This flag was set but unused.

Change-Id: Ia079b52b88ffbe3b16fdbde4b84e2b87304eaa13
2012-01-11 13:02:19 -08:00
Scott LaVarnway
33d9ea5471 Merge "Remove useless g_common.h" 2012-01-03 09:48:35 -08:00
John Koleszar
0c2b2c79ae Remove unnecessary ternary constructs
The code had a number of constructs like (condition)?1:0,
which is redundant with C's semantics. In the cases where a boolean
operator was used in the condition, simply remove the ternary part.
Otherwise adjust the surrounding expression to remove the condition
(eg, for rounding up. See pickinter.c and rdopt.c)

Change-Id: Icb2372defa3783cf31857d90b2630d06b2c7e1be
2011-12-22 10:09:46 -08:00
John Koleszar
0c2f8e77cc Remove useless g_common.h
This file declared a bunch of nonexistent, unreferenced global
function pointers.

Change-Id: Ic26bb8c7712deba754c49fc01f383b53afc9e728
2011-12-21 15:02:23 -08:00
Scott LaVarnway
a53d5a4c44 Moved dequant idct into common
These functions are now used by the encoder.
This is WIP with the goal of creating a common idct/add for
the encoder and decoder.  A boost of 1.8% was seen for
the HD rt test clip used.

[Tero] Added needed changes to ARM side.

Change-Id: Ibbb8000be09034203d7adffc457d3c3f8b06a5bf
2011-12-15 14:23:41 -05:00
Yunqing Wang
e06c242baa Only call vp8_find_near_mvs() once for each macroblock
While doing motion search on a macroblock, we usually call
vp8_find_near_mvs once per reference frame. Actually, for
different reference frames, the only difference in calculating
these near_mvs is they may have different sign_bias, which
causes a sign change in resulting near_mvs. In this change, we
only do find_near_mvs for the first reference frame. For other
reference frames, only need to adjust the near_mvs according to
that reference frame's sign_bias value.

Change-Id: I661394b49c6ad79fed7d0f2eb2be239b9c56f149
2011-12-15 11:19:18 -05:00
Jim Bankoski
6de67cd6e8 vp8e - entropy stats per frame type
Change-Id: I4168eb6ea22ae541471738a7a3453e7d52059275
2011-12-09 16:56:18 -08:00
Yunqing Wang
aa7335e610 Multiple-resolution encoder
The example encoder down-samples the input video frames a number of
times with a down-sampling factor, and then encodes and outputs
bitstreams with different resolutions.

Support arbitrary down-sampling factor, and down-sampling factor
can be different for each encoding level.

For example, the encoder can be tested as follows.
1. Configure with multi-resolution encoding enabled:
../libvpx/configure --target=x86-linux-gcc --disable-codecs
--enable-vp8 --enable-runtime_cpu_detect --enable-debug
--disable-install-docs --enable-error-concealment
--enable-multi-res-encoding
2. Run make
3. Encode:
If input video is 1280x720, run:
./vp8_multi_resolution_encoder 1280 720 input.yuv 1.ivf 2.ivf 3.ivf 1
(output: 1.ivf(1280x720); 2.ivf(640x360); 3.ivf(320x180).
The last parameter is set to 1/0 to show/not show PSNR.)
4. Decode:
./simple_decoder 1.ivf 1.yuv
./simple_decoder 2.ivf 2.yuv
./simple_decoder 3.ivf 3.yuv
5. View video:
mplayer 1.yuv -demuxer rawvideo -rawvideo w=1280:h=720 -loop 0 -fps 30
mplayer 2.yuv -demuxer rawvideo -rawvideo w=640:h=360 -loop 0 -fps 30
mplayer 3.yuv -demuxer rawvideo -rawvideo w=320:h=180 -loop 0 -fps 30

The encoding parameters can be modified in vp8_multi_resolution_encoder.c,
for example, target bitrate, frame rate...

Modified API. John helped a lot with that. Thanks!

Change-Id: I03be9a51167eddf94399f92d269599fb3f3d54f5
2011-12-05 17:59:42 -05:00
John Koleszar
e55974bf86 Speed selection support for disabled reference frames
There was an implicit reference frame test order (typically LAST,
GOLD, ARF) in the mode selection logic, but this doesn't provide the
expected results when some reference frames are disabled. For
instance, in real-time mode, the speed selection logic often disables
the ARF modes. So if the user disables the LAST and GOLD frames, the
encoder was always choosing INTRA, when in reality searching the ARF
in this case has the same speed penalty as searching LAST would have
had.

Instead, introduce the notion of a reference frame search order. This
patch preserves the former priorities, so if a frame is disabled, the
other frames bump up a slot to take its place. This patch lays the
groundwork for doing something smarter in the frame test order, for
example considering temporal distance or looking at the frames used by
nearby blocks.

Change-Id: I1199149f8662a408537c653d2c021c7f1d29a700
2011-11-18 13:53:21 -08:00
Scott LaVarnway
3c755577b8 Merge "Added predictor stride argument(s) to subtract functions" 2011-11-17 10:17:53 -08:00
Scott LaVarnway
edd98b7310 Added predictor stride argument(s) to subtract functions
Patch set 2: 64 bit build fix
Patch set 3: 64 bit crash fix

[Tero]
Patch set 4: Updated ARMv6 and NEON assembly.
             Added also minor NEON optimizations to subtract
             functions.

Patch set 5: x86 stride bug fix

Change-Id: I1fcca93e90c89b89ddc204e1c18f208682675c15
2011-11-15 12:53:01 -05:00
John Koleszar
bdd35c13cc avoid resetting framerate during vpx_codec_enc_config_set()
The calculated frame_rate is a state variable in the codec, and
shouldn't be maintained in the configuration struct. Move it to the
main part of cpi so that it isn't clobbered when the configuration
struct is updated. The initial framerate estimate is moved from the
vp8_cx_iface.c wrapper into the body of init_config() in onyx_if.c, so
that it is only called once and not reset on every call to
vp8_change_config().

Change-Id: I8d9a3d1283330d1ee297d07e9d78d1f2875f2465
2011-11-11 14:45:58 -08:00
Johann
ea2229bab6 Merge "ARMv6 optimized Intra4x4 prediction" 2011-11-09 09:36:33 -08:00
Tero Rintaluoma
5a2fd63a2a ARMv6 optimized Intra4x4 prediction
Added ARM optimized intra 4x4 prediction
 - 2x faster on Profiler compared to C-code compiled with -O3
 - Function interface changed a little to improve BLOCKD structure
   access

Change-Id: I9bc2b723155943fe0cf03dd9ca5f1760f7a81f54
2011-11-09 09:13:51 +02:00
Yunqing Wang
4c14efd234 Fix checks in MB quantizer initialization
vp8cx_mb_init_quantizer() needs to be called at least once to get
all values calculated. This change added one check to decide if
we could skip initialization or not.

Change-Id: I3f65eb548be57580a61444328336bc18c25c085b
2011-11-08 12:11:48 -05:00
Tero Rintaluoma
e4f2ec7a52 Change use of eob in the encoder
Changed 'int eob' to 'char *eob' in BLOCKD so that both encoder and
decoder will use eobs[25] array from MACROBLOCKD structure. In future,
this will enable use of the decoder side IDCT in the encoder.

Change-Id: I6e1c011628cb8864fd4a0b80f0279ce16a5ca978
2011-11-03 16:08:09 +02:00
Scott LaVarnway
ed9c66f584 Remove usage of predict buffer for decode
Instead of using the predict buffer, the decoder now writes
the predictor into the recon buffer.  For blocks with eob=0,
unnecessary idcts can be eliminated.  This gave a performance
boost of ~1.8% for the HD clips used.

Tero: Added needed changes to ARM side and scheduled some
      assembly code to prevent interlocks.

Patch Set 6:  Merged (I1bcdca7a95aacc3a181b9faa6b10e3a71ee24df3)
into this commit because of similarities in the idct
functions.
Patch Set 7: EC bug fix.

Change-Id: Ie31d90b5d3522e1108163f2ac491e455e3f955e6
2011-10-18 12:06:50 -04:00
Scott LaVarnway
b870947d42 Removed bmi copy to/from BLOCKD
for SPLITMV and B_PRED modes.  Modified code to use the bmi
found in mode_info_context instead of BLOCKD.  On the decode
side, the uvmvs are calculated only when required, instead of
every macroblock.  This is WIP. (bmi should eventually be
removed from BLOCKD)
Small performance gains noticed for RT encodes and decodes.(VGA)

Change-Id: I2ed7f0fd5ca733655df684aa82da575c77a973e7
2011-08-24 14:42:26 -04:00
Yunqing Wang
2f2302f8d5 Preload reference area in sub-pixel motion search (real-time mode)
This change implemented same idea in change "Preload reference area
to an intermediate buffer in sub-pixel motion search." The changes
were made to vp8_find_best_sub_pixel_step() and vp8_find_best_half
_pixel_step() functions which are called when speed >= 5. Test
result (using tulip clip):

1. On Core2 Quad machine(Linux)
rt mode, speed (-5 ~ -8), encoding speed gain: 2% ~ 3%
rt mode, speed (-9 ~ -11), encoding speed gain: 1% ~ 2%
rt mode, speed (-12 ~ -14), no noticeable encoding speed gain

2. On Xeon machine(Linux)
Test on speed (-5 ~ -14) didn't show noticeable speed change.

Change-Id: I21bec2d6e7fbe541fcc0f4c0366bbdf3e2076aa2
2011-07-27 14:19:10 -04:00
Yunqing Wang
f11613b620 Merge "Fix range checks in motion search" 2011-07-27 09:34:13 -07:00
Yunqing Wang
bde2afbe23 Fix range checks in motion search
There were some situations that the start motion vectors were
out of range. This fix adjusted range checks to make sure they
are checked and clamped.

Change-Id: Ife83b7fed0882bba6d1fa559b6e63c054fd5065d
2011-07-27 10:37:33 -04:00
James Zern
b45065d38b cosmetics: consistently use [u]int64_t
Removes mixed usage of (unsigned) long long and INT64.
Fixes Issue #208.

Change-Id: I220d3ed5ce4bb1280cd38bb3715f208ce23cf83a
2011-07-26 11:34:36 -07:00
Yunqing Wang
587ca06da9 Minor change in pick_inter_mode()
Scott suggested to move vp8_mv_pred() under "case NEWMV" to save
extra checks.

Change-Id: I09e69892f34a08dd425a4d81cfcc83674e344a20
2011-07-08 14:08:45 -04:00
Yunqing Wang
40991faeae Adjust full-pixel clamping and motion vector limit calculation
Do mvp clamping in full-pixel precision instead of 1/8-pixel
precision to avoid error caused by right shifting operation.
Also, further fixed the motion vector limit calculation in change:
b748045470

Change-Id: Ied88a4f7ddfb0476eb9f7afc6ceeddbf209fffd7
2011-07-08 11:34:28 -04:00
Yunqing Wang
ae8aa836d5 Merge "Copy macroblock data to a buffer before encoding it" 2011-06-30 11:14:24 -07:00
Yunqing Wang
b748045470 Bug fix in motion vector limit calculation
Motion vector limits are calculated using right shifts, which
could give wrong results for negative numbers. James Berry's
test on one clip showed encoder produced some artifacts. This
change fixed that.

Change-Id: I035fc02280b10455b7f6eb388f7c2e33b796b018
2011-06-30 11:20:13 -04:00
John Koleszar
b32da7c3da Use MAX_ENTROPY_TOKENS and ENTROPY_NODES more consistently
There were many instances in the code of vp8_coef_tokens and
vp8_coef_tokens-1, which was a preprocessor macro despite the naming
convention. Replace these with MAX_ENTROPY_TOKENS and ENTROPY_NODES,
respectively.

Change-Id: I72c4f6c7634c94e1fa066cd511471e5592c748da
2011-06-28 17:03:55 -04:00
Yunqing Wang
0d87098e08 Copy macroblock data to a buffer before encoding it
I got this idea from Pascal (Thanks). Before encoding a macroblock,
copy it to a 16x16 buffer, and then read source data from there
instead. This will help keep the source data in cache, and help
with the performance.

Change-Id: Id05f4cb601299150511d59dcba0ae62c49b5b757
2011-06-23 13:54:02 -04:00
Yaowu Xu
10ed60dc71 adjusting the calculation of errorperbit
RDMULT/RDDIV defines a bit worth of distortion in term of sum squared
difference. This has also been used as errorperbit in subpixel motion
search, where the distortions computed as variance of the difference.
The variance of differences is different from sum squared differences
by amount of DC squared. Typically, for inter predicted MBs, this
difference averages around 10% between the two distortion, so this patch
introduces a 110% constant in deriving errorperbit from RDMULT/RDDIV.

Test on CIF set shows small but positive gain on overall PSNR (.03%)
and SSIM (.07%), overall impact on average PSNR is 0.

Change-Id: I95425f922d037b4d96083064a10c7cdd4948ee62
2011-06-20 16:32:30 -07:00
Scott LaVarnway
e71a010646 Calc ref_frame_cost once per frame
instead of every macro block.

Change-Id: I2604e94c6b89e3a8457777e21c8c38406d55b165
2011-06-13 09:58:03 -04:00
John Koleszar
96a42aaa2d Move RD intra block mode selection to rdopt.c
This change is analogous to I0b67dae1f8a74902378da7bdf565e39ab832dda7,
which made the move for the non-RD path.

Change-Id: If63fc1b0cd1eb7f932e710f83ff24d91454f8ed1
2011-06-08 12:05:05 -04:00
Yaowu Xu
7368dd4f8f Merge "remove redundant functions" 2011-06-07 16:36:37 -07:00
Yaowu Xu
221e00eaa9 adjust sad per bit constants
While investigating the effect of DC values on SAD and SSE in motion
estimation, a side finding indicates the two table of constants need
be adjusted. The adjustment was done by multiplying old constants by
90% with rounding. Also absorb the 1/2 scaling constant into the two
tables. Refer to change Ifa285c3e for background of the 1/2 factor.

Cif set test showed a very small gain on all metric.

Change-Id: I04333527a823371175dd46cb04a817e5b9a8b752
2011-06-07 12:35:03 -07:00
Yaowu Xu
d4700731ca remove redundant functions
The encoder defined about 4 set of similar functions to calculate sum,
variance or sse or a combination of them. This commit removed one set
of these functions, get8x8var and get16x16var, where calls to the later
function are replaced with var16x16 by using the fact on a 16x16 MB:
    variance == sse - sum*sum/256

Change-Id: I803eabd1fb3ab177780a40338cbd596dffaed267
2011-06-06 16:44:05 -07:00
Scott LaVarnway
8c5b73de2a Merge "Removed B_MODE_INFO" 2011-06-03 08:32:30 -07:00
Scott LaVarnway
773768ae27 Removed B_MODE_INFO
Declared the bmi in BLOCKD as a union instead of B_MODE_INFO.
Then removed B_MODE_INFO completely.

Change-Id: Ieb7469899e265892c66f7aeac87b7f2bf38e7a67
2011-06-02 13:46:41 -04:00
Yaowu Xu
5b2fb32961 further clean up of errorperbit and sadperbit
this commit makes the usage errorperbit and sadperbit consistent for
encoding modes and passes. Removed all different magic weight factors
associated with errorperbit. Now 1/2 is used for both sadperbit16 and
sadperbit4, the /2 operation is merged into initializations of the 2
variables.

Tests on cif set show .23%, 0.18% and 0.19% gain by avg psnr, overall
psnr and ssim respectively.

Change-Id: Ifa285c3e065ce0a5a77addfc9f95aabf54ee270d
2011-06-01 14:44:06 -07:00
Yaowu Xu
50916c6a7d remove some magic weights associated with sad_per_bit
sad_per_bit has been used for a number of motion vector search routines
with different magic weights: 1, 1/2 and 1/4. This commit remove these
magic numbers and use 1/2 for all motion search routines, also reformat
a number of source code lines to within 80 column limit.

Test on cif set shows overall effect is neutral on all metrics. <=0.01%

Change-Id: I8a382821fa4cffc9c0acf8e8431435a03df74885
2011-06-01 10:10:44 -07:00