This reverts commit a5d79f43b9
There is an issue with gcc 4.6 in the Android NDK:
loopfilter_neon.c: In function 'vp8_loop_filter_vertical_edge_y_neon':
loopfilter_neon.c:394:1: error: insn does not satisfy its constraints:
Change-Id: I2b8c6ee3fa595c152ac3a5c08dd79bd9770c7b52
Added macro to conditionally compile some of the
post-processing functions only when CONFIG_POSTPROC
is defined.
This was causing the build for the generic-gnu target
to fail.
Change-Id: Ibfa447feceb7a0528135025f105be48f97e9965c
The rounding of the ARNR filter output prior to
normalization by the filter strength was incorrect
when strength = 0.
In this case 1 << (strength - 1) would not create the
required rounding of 0, rather it would outrange. This
patch fixes this issue.
Change-Id: I771809ba34d6052b17d34c870ea11ff67b418dab
Used horizonal add instructions instead of adding
byte lanes. The encoder performance improved by
~4% for the test clip used.
Change-Id: Iaddd10403fcffb5b3f53b1f591ab2fe0ff002c08
This patch did a cleanup following the commit "Save NEON registers
in VP8 NEON functions". The pushing/poping of callee-saved NEON
registers was moved into individual NEON functions. Therefore,
we don't need to save those registers at the beginning of codec.
The related code was removed.
Change-Id: I5648166514fc9beffb780aa138495597731f49ea
The recent compiler can generate optimized code that uses NEON registers
for various operations besides floating-point operations. Therefore,
only saving callee-saved registers d8 - d15 at the beginning of the
encoder/decoder is not enough anymore. This patch added register saving
code in VP8 NEON functions that use those registers.
Change-Id: Ie9e44f5188cf410990c8aaaac68faceee9dffd31
This patch fixed errors reported in Issue 746: "dr memory VP8
encode errors" and Issue 745: "dr memory VP8 decode errors".
The "UNINITIALIZED READ" errors were fixed in x86 assembly
code. The list of files fixed is
vp8_intra_pred_uv_tm_sse2
vp8_intra_pred_uv_tm_ssse3
vp8_intra_pred_uv_ho_mmx2
vp8_intra_pred_uv_ho_ssse3
vp8_intra_pred_y_tm_sse2
vp8_intra_pred_y_tm_ssse3
vp8_intra_pred_y_ho_sse2
Change-Id: Ib6df7bf1d442077fe534edfd90e50ad16fadacdd
This commit added a check of reference frame to make sure that pre
buffer pointers are initialized only when necessary and make them
to 0 if ref frame is intra, hence those buffer should never be used.
Change-Id: Ieb474fcd9feb759f02e2f9c282b7348a8fa31117
Added command line flags "resize-width" & "resize-height"
to allow the user to specify the frame size to encode at.
These two flags are ignored if the "resize-allowed" switch
is not set to 1.
All frames in the clip are then encoded at this size, which
must be smaller than the raw frame size.
Change-Id: I3d64bd9303d5c0bd678461a866a1ea621700d744
This patch fixed WebRTC Issue 3020: "Uninit error at
vp8_mbpost_proc_down_xmm". The first 8 values in d were not initialized,
but was accessed. This patch fixed c code as well as mmx and sse2 code.
Change-Id: Iaa5b41a4ed3bea971b15fb826ce34b7ab4e36fb1
significantly speeds up file generation.
the goal of this change is to convert rtcd.sh to perl as directly as
possible to allow for simple comparison. future changes can make it more
perl-like.
---
Linux
[CREATE] vpx_scale_rtcd.h
real 0m0.485s -> 0m0.022s
[CREATE] vp8_rtcd.h
real 0m4.619s -> 0m0.060s
[CREATE] vp9_rtcd.h
real 0m10.102s -> 0m0.087s
Windows
[CREATE] vpx_scale_rtcd.h
real 0m8.360s -> 0m0.080s
[CREATE] vp8_rtcd.h
real 1m8.083s -> 0m0.160s
[CREATE] vp9_rtcd.h
real 2m6.489s -> 0m0.233s
Change-Id: Idfb71188206c91237d6a3c3a81dfe00d103f11ee
Removing all copies of identical vp8_mse2psnr/vp9_mse2psnr functions.
Using vpx_sse_to_psnr() instead in all places.
Change-Id: I15beef9834d43d8fc8a8a7a2d1fc5de3d658fed8
Added support for external frame buffers to libvpx's VP9 decoder.
If the external frame buffer functions are set then libvpx will
call the get function whenever it needs a new frame buffer to
decode a frame into. And it will call the release function
whenever there are no more references to that buffer.
Change-Id: Id2934d005f606af6e052fb6db0d5b7c02f567522
Filter out files ending in _neon.c and append .neon so the Android build
system knows to apply -mfpu=neon
Change-Id: Ib67277e5920bfcaeda7c4aa16cd1001b11d59305
Under a configuration change, where the bitrate suddenly decreases,
the buffer level may be larger than maximum allowed (for that first frame to be encoded after change_config).
This change keeps it clipped to its maximum level.
Change-Id: I4d0b5b3d1fd8148600dd39e02bd630c9464baba5
There were two problems with the format string in
the conditionally compiled print statement. It referred
to a variable that is no longer available and it used
incorrect format specifiers.
Change-Id: I315e22bea2691bb535a2e33f5ca206fc55287a37
When a frame is dropped due to |buffer_level| < 0 for a given temporal layer,
the buffer level for the upper temporal layers was not updated (in calc_pframe_target_size()).
This change fixes that.
Also, use the layer per-frame-bandwidth for updating the buffer level
of the higher layers when a frame is dropped.
Change-Id: I660c23f3229b47e9d124a950b480314b4307c5a8
The clamp operation may not affect the values of the final assigned mv
where compiler may make use of strict aliasing rule to optimize out the
clamp operation. This change made the code segments to better comply
the strict aliasing rule.
Change-Id: I24502ff18bd4f9e62507a879cc8760a91a0fd07e
coef_counts is now in cpi->mb, instead of cpi. The commit corrected the
mis-use and enable succefual build.
Change-Id: I0e77909d34571cfd2560c66b46b1f8fa0cd1a6b4
The declaration of the bilinear filters specified an alignment clause
in the implementation file but not in the header. This turned out
to be harmless, but it did cause linker warnings to be emitted when
building on Windows.
The (extern) declaration in the header was changed, to match the
declaration in the implementation.
Change-Id: I44be89b1572fe9a50fa47a42e4db9128c4897b04
Jenkins warns on left shift of negative numbers and non-aligned read
of int. This commit fixed the two issues.
Change-Id: I389a7fb6a572c643902e40a4c10fefef94500d2c
Sample app: vp9_spatial_scalable_encoder
vpx_codec_control extensions:
VP9E_SET_SVC
VP9E_SET_WIDTH, VP9E_SET_HEIGHT, VP9E_SET_LAYER
VP9E_SET_MIN_Q, VP9E_SET_MAX_Q
expanded buffer size for vp9_convolve
modified setting of initial width in vp9_onyx_if.c so that layer size
can be set prior to initial encode
Default number of layers set to 3 (VPX_SS_DEFAULT_LAYERS)
Number of layers set explicitly in vpx_codec_enc_cfg.ss_number_layers
Change-Id: I2c7a6fe6d665113671337032f7ad032430ac4197
Adds a new end-usage option for constant quality encoding in vpx. This
first version implemented for VP9, encodes all regular inter frames
using the quality specified in the --cq-level= option, while encoding
all key frames and golden/altref frames at a quality better than that.
The current performance on derfraw300 is +0.910% up from bitrate control,
but achieved without multiple recode loops per frame.
The decision for qp for each altref/golden/key frame will be improved
in subsequent patches based on better use of stats from the first pass.
Further, the qp for regular inter frames may also be varied around the
provided cq-level.
Change-Id: I6c4a2a68563679d60e0616ebcb11698578615fb3
these are only used in the encoder.
frames_since_golden / frames_till_alt_ref_frame -> VP[89]_COMP
Change-Id: Ie14a6f46987bced685ddb449b85dc261caba6dfe
this was never fleshed out in the context of VP8, for which it was
added. for VP9 it has no meaning.
Change-Id: Iba2ecc026d9e947067b96690245d337e51e26eff
This allows code calling the library can choose an arbitrary
encryption algorithm.
Decoder control parameter VP8_SET_DECRYPT_KEY is renamed to
VP8D_SET_DECRYPTOR, and now takes an small config struct instead
of just a byte array.
Change-Id: I0462b3388d8d45057e4f79a6b6777fe713dc546e
If the codec was configured with --enable-internal-stats,
a seg fault would occur. This patch fixes the problem.
Change-Id: Id10a577973d185e93037c59e5b36bebdded327da
Condition the existing zbin boost logic for gf/altf mode to temporal layers==1,
since gf/altf reference frames are used in temporal layers as reference frames.
Change-Id: I618bb20730e5f193e078215d06f54997c363dd7b
Previously, the microsoft arm assembler errored out, saying that
bilinear_taps_coeff was an undefined symbol.
Change-Id: Ib938f0b454c41ccbd801e70a7c9acc0fa04e3c55
Use a separate counter for resetting the pattern upon
a change in temporal layers, and set/initialize the
layer context parameters for the new temporal layer state.
Also moved the setting of layer configuation in init_config()
to a separate function.
Change-Id: Ic7fc023a1e5490020509e107004645098f4c00f0
Conflicts:
vp9/common/vp9_findnearmv.c
vp9/common/vp9_rtcd_defs.sh
vp9/decoder/vp9_decodframe.c
vp9/decoder/x86/vp9_dequantize_sse2.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_common.mk
Resolve file name changes in favor of master. Resolve rdopt changes in
favor of experimental, preserving the newer experiments.
Change-Id: If51ed8f457470281c7b20a5c1a2f4ce2cf76c20f
The only reason for the _intrinsics part of the file name was for the
interim period where only one of the functions was redone and the base
file name was the same.
Change-Id: I7851154f1633d48821bee885b1cadb2148e65a23
This is work-in-progress, it implements multiple ARF
encoding behind an experimental flag.
It adds the ability to insert multiple ARF frames into a
single ARF group. This patch implements the reordering
of the coded frames, and implements a fixed-length coding
pattern. It applies a fixed quantizer strategy based on
where the frame is in the coding sequence.
Further work to modify the rate control strategy is
ongoing and will be submitted via a set of future patches.
In this first step, each ARF group is recursively
bisected and an ARF frame added at that position in the
sequence. The recursion continues until ARF frames are
within MIN_GF_INTERVAL frames.
The code sits behind the "multiple-arf" experimental
flag ("CONFIG_MULTIPLE_ARF"). The experimental flag
"oneshotq" ("CONFIG_ONESHOTQ") also needs to be enabled
for this patch to work correctly.
Change-Id: Ie473b05ebb43ac473c0cfb659b2b8042823085e2
Use local variable for setting the improved prediction mode.
cpi->sf.improved_mv_pred is set/fixed at the frame level
and should not be changed inside pick_inter_mode.
Change-Id: Ie28d9171ac000e631af0e30204970e3d4fff3078
Pick up VP8 encryption, quantization changes, and some fixes to vpxenc
Conflicts:
test/decode_test_driver.cc
test/decode_test_driver.h
test/encode_test_driver.cc
vp8/vp8cx.mk
vpxdec.c
vpxenc.c
Change-Id: I9fbcc64808ead47e22f1f22501965cc7f0c4791c
and denoising.c
Adding -Wshadow to CFLAGS generated a bunch of warnings. This patch
removes these warnings.
Change-Id: I434a9f4bfac9ad4ab7d2a67a35ef21e6636280da
ratectrl.c and quantize.c
Adding -Wshadow to CFLAGS generated a bunch of warnings. This patch
removes these warnings.
Change-Id: I8c8faa9fde57c1c49662d332a90bc8d9a0f4a2ce
Adding -Wshadow to CFLAGS generated a bunch of warnings. This commit
is based on work already done by jzern.
Change-Id: Iefc08a7ab601c4d1b507f039577433bfb1c6cc9d
Writing all #define guards using the same style. Inlining macro
VP8DX_BOOL_DECODER_FILL into vp8dx_bool_decoder_fill. Removing unnecessary
includes.
Change-Id: I483fa979ab34008bf7835b5f34c6471c44daf956
Remove dependency of this function on asm_offsets. ssse3/sse4 next.
Change quant_shift calculation so it be done using SIMD. Pre-calculate
as much as possible to simplify EOB selection.
Take advantage of qcoeff being zero'd by tying the if statements
together.
Speed parity with previous implementation with gcc x86_64 linux
Change-Id: Ife97556a1eca3a74b09def1a3d04084974dff1fb
Reduce dependency on offsets file by using intrinsics. Disassembly shows
improvements over previous assembly specifically in register management,
preloading, and {pro,epi}log. Speed change is within margin of error.
Change-Id: I8131b4b4d62bc092407fe847bfaa8f2c0e1384ff
Started adding support for multiple internal decoder instances. Also added
code to limit the vp8 config options available when using frame-based
multithreading.
Change-Id: I0f1ee7abcfcff59204f50162e28254b8dd6972eb
Adds a flag to disable features that would inhibit frame parallel
decoding. This includes backward adaptation and MV sorting based
on search in ref frame buffer.
Also includes some minor clean-ups.
Change-Id: I434846717a47b7bcb244b37ea670c5cdf776f14d
When error concealment is enabled, it swaps the mi and prev_mi ptrs after
each frame is decoded. The postproc uses the mi ptr for the mode info context.
Now the postproc will use the correct mode info context.
Change-Id: I537ae5450f319c624999b44525bb52bb30047b7b
Reduce the delta loop filter for blocks that are cyclicly refreshed.
This helps to reduce the dot artifacts that may happen
when zero_mv blocks are repeatedly loop-filtered.
This change, along with the fix in:
https://gerrit.chromium.org/gerrit/#/c/40409/
helps to reduce this artifact, but cannot remove the dot artifacts completely.
Change-Id: I44675e7a0f59295b648a3b7d4956fb301231a97f
