Re-enable the SVC tests, wrap the non-zero expectation
in GetMismatchFrames around #if CONFIG_VP9_DECODER.
Change-Id: I0e8a2d78b868c32f18fe597540f397d3a1b303b5
Disable the 1 pass CBR SVC tests with temporal_layers > 1.
Issue with the commit 863f860, which will cause encoder/decoder
mismatch due to skipping encoder loopfilter for non-reference frames.
Will re-enable the tests when fixed.
Change-Id: I74918a0045a17976b069c4be63fbeb921974df0d
Modify the frame flags to update the ARF on top layer,
for the tests:
VP9/DatarateTestVP9Large.BasicRateTargeting3TemporalLayers
VP9/DatarateTestVP9Large.BasicRateTargeting3TemporalLayersFrameDropping
This is needed to fix the encode/decoder mismatches caused by 863f860,
and removed in the revert e9b7f98.
Change-Id: I6b9fecfdd17315fc0179e29949338c77636026c0
This reverts commit 863f860bfc.
This causes encoder / decoder mismatches in various
VP9/DatarateTestVP9Large.BasicRateTargeting3TemporalLayers tests
BUG=webm:1408
Change-Id: Ic200c39d7ed9c0b0247ef562f5d6f7b2625f7e14
Useful for SVC, where the top layer enhancement frames may
not update any reference buffers, as is the case for the
patterns in the 1 pass CBR SVC when #temporal_layers > 1.
~3% encoder speedup for SVC patterns with temporal layers
in 1 pass CBR mode.
Updated the SVC datarate tests for the mismatch frames.
Set the frame-dropper off in some tests with #temporal_layers > 1
so we can correctly set #mismatch frames. Adjusted rate target
threshold for tests where frame-dropper was turned off.
Change-Id: Ia0c142f02100be0fed61cd2049691be9c59d6793
Make the source_sad feature work properly for cases of VBR or
screen_content with SVC.
Added unittest for SVC with screen-content on.
Change-Id: Iba5254fd8833fb11da521e00cc1317ec81d3f89b
Enable row-mt for SVC for real-time mode, speed >=5.
Add the controls to the sample encoders, but keep it off for now.
Add the control and enable it for the 1 pass CBR unittests.
For speed 7, 3 layer SVC, 2 threads, row-mt enabled gives about ~5% speedup.
Change-Id: Ie8e77323c17263e3e7a7b9858aec12a3a93ec0c1
If enabled denoiser will only denoise the top spatial layer for now.
Added unittest for SVC with denoising.
Change-Id: Ifa373771c4ecfa208615eb163cc38f1c22c6664b
Comment out check on buffer underrun, as it currently fails
on some of the svc tests.
Also cast the update of bits_in_buffer_model_, as this can
go negative now due to the buffer underrun.
This fixes the issue in #1352.
BUG=webm:1350
BUG=webm:1352
Change-Id: Ibd4ef23921daf09e5c15b000aca904aa4573599c
This reverts commit f0b491a524.
This change results in unsigned integer overflows (as reported by
-fsanitize=integer) in datarate_test.cc,
for many of --gtest_filter=VP9/DatarateOnePassCbrSvc.OnePassCbrSvc*:
unsigned integer overflow: 167198 - 185560 cannot be represented in type
'unsigned long'
As the encoder didn't change, but the input with the change to
(correctly) use Y4mVideoSource, this revert is merely masking the issue.
BUG=webm:1352
Change-Id: Iecd9a6c83b3fca67c566732a5c92d36193cc2060
Comment out check on buffer underrun, as it currently fails
on some of the svc tests.
BUG=webm:1350
Change-Id: I73c88b800cdcc06bd2f900f7b7e2a5fd08248065
use_base_mv assumes 2x2 scaling, so fix is to shutoff
this feature unless spatial scale factors are 2.
Added svc unittest for 2 spatial layers with 5x5 scaling,
which generates the issue without this fix.
Also fix some settings in svc unittest:
let the speed setting vary (from 5 to 8), and enable static threshold.
BUG=webm:1344
Change-Id: Idfd0a6c633c21b49a0479601506302cfe974e30e
Control already exists for vp9, adding it to vp8.
Usage is only when error_resilient is off.
Added a datarate unittest for non-zero boost.
Change-Id: I4296055ebe2f4f048e8210f344531f6486ac9e35
Fix unit_tests_ubsan failure for VP8/DatarateTestLarge.DenoiserOffOn.
Failure was triggered by commit: df66f8e8.
Change-Id: I7cc5bd309e85950cfc5755e01d0eb942d9ca6984
applied against a x86_64 configure with and without
--enable-vp9-highbitdepth
clang-tidy-3.7.1 \
-checks='-*,google-readability-braces-around-statements' \
-header-filter='.*' -fix
+ clang-format afterward
Change-Id: Ia2993ec64cf1eb3505d3bfb39068d9e44cfbce8d
Allow usage of lookahead for VBR in real-time mode, for 1 pass vbr.
Current usage is for fast checking of future scene cuts/changes,
and adjusting rate control (gf interval and active_worst/target size).
Added unittests (datarate) for 1 pass vbr mode, with non-zero lag.
Added an experimental option to limit QP based on lookahead.
Overall positive gain in metrics on ytlive set:
avgPNSR/SSIM up on average ~1-3%; several clips up by 5, 7%.
Change-Id: I960d57dfc89de121c4824b9a9bf88d2814e74b56
Don't advance the svc frame counters on dropped frame,
since this can break the referencing scheme and lead
to a crash/assert.
Updated svc-datarate unittest to add a lower bitrate test.
Change only affects 1 pass cbr svc, with frame dropper enabled.
Change-Id: Ibb7530b7a587a9344d46898d9286fd9e2ef0779c
Use the superframe counter to set the key frame, and force
it to the key frame on base spatial layer only.
Also, update svc frame counters under frame dropping.
Update unittest: add specific tests with short key frame period.
https://bugs.chromium.org/p/webm/issues/detail?id=1150
Change-Id: I5b1c9a09253e6e5fbfce51b4cf603ae22d422b01
For 1 pass cbr mode: allow for two-stage 1:2 scaling
(which will use the 1:2 optimized scaler) if the spatial
layer is 1/4x1/4 of souce.
Without this change, the base layer for 3 spatial layers would
be using the non-normative scaler which is un-optimized/C code.
Change-Id: I9d73f92a4a96927d0f1d6bf75315c1e60513226a
restore the value for VP9 to 9999 to satisfy the current test
expectations; without this
VP9/DatarateTestVP9Large.ChangingDropFrameThresh/8 will overshoot.
Change-Id: I88dad574ae4ab10f923579824c7347ff468c7045
Reset the scale factors before build_inter_predictors.
Add datarate tests for 3 spatial layers, which exposed this issue.
Change-Id: I7f81efbe44345ecea9fdd5f639a4cca76aed3874
the same as vp8, with the same reasoning from:
2a0d7b1 Reduce the default kf_max_dist to 128.
see also:
https://trac.ffmpeg.org/ticket/4904https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=815673
+ restore vpxenc behavior of taking the library default rather than
forcing 5s
This change also exposes an issue with one-pass svc in cbr mode, keep
the old default in datarate_test.cc for now.
Change-Id: Id6d1244f42490b06fefc1a7b4e12a423a1f83e88
Remove comment(s) and enable frame-dropper for tests.
Frame dropper for 1 pass svc was fixed a while ago:
https://chromium-review.googlesource.com/#/c/309230/
Change-Id: I5fd3192825b22e562db9210d3dc7b246a1799d8d
