This commit added a logic to prevent the inter_filter type from being
changed if the default interp_filter mode is not switchable. Also, it
sets the default interp_filter to BILINEAR at very and super fast rtc
encoding modes
Change-Id: Ic41e6d31de29795a4ce536ec79afb01cab6daad3
--rt --cpu-used=-5 uses the progressive rtc mode
--rt --cpu-used=-6 uses the new super fast rtc mode
Change-Id: Id6469ca996100cdf794a0e42d76430161f22f976
In this new mode, the size range is strictly determined by the min
and max partition size in neighborhood blocks.
Niklas720 encoding time at cpu-used -5 goes from 56250ms to 50676ms,
a 10% reduction.
Change-Id: I316b0e2ac967ff3fad57b28d69c0ec80b7d8b34e
This patch only works if the video is a width and height that are both
a multiple of 32.. It sets every partition to 16x16, and does INTRADC
only on the first frame and ZEROMV on every other frame. It always does
does the largest possible transform, and loop filter level is set to 4.
Was ~20% faster than speed -5 of vp8
Now 20% slower but adds motion search ( every block ), nearest, near
and zeromv
The SVC test was changed because - while this realtime mode produces
bad quality albeit quickly, it isn't obeying all the rules it should
about which frames are available.
Change-Id: I235c0b22573957986d41497dfb84568ec1dec8c7
This commit deprecates the use of best_mv from encoding and bit-stream
writing stages. It hence removes the definition from MACROBLOCKD.
Change-Id: I8e5302775a2aa4a18900726df407bff881f2dfb1
This commit setups a test framework for real-time coding. It enables
a light motion search for non-RD mode decision purpose.
Change-Id: I8bec656331539e963c2b685a70e43e0ae32a6e9d
Calculate the skip_coeff as part of the encode process, rather than
checking the eobs after the fact with another pass.
Change-Id: Ib41b139e96a97dee30e4b993b4cc53d86337128d
This commit allows encoder to compare the SAD cost associated with
the best motion vector predictor, per frame. If one reference frame
has this cost more than 4 times of the best SAD cost given by other
reference frames, skip NEARESTMV, NEARMV, ZEROMV mode check of this
reference frame.
This setting is turned on in speed 2 and above. Compression quality
change in speed 2:
derf -0.014%
yt -0.097%
hd -0.023%
stdhd 0.046%
It reduces the speed 2 runtime of test sequences:
pedestrian_area_1080p 4000 kbps 310763 ms -> 303595 ms
bluesky_1080p 6000 kbps 259852 ms -> 251920 ms
Change-Id: I7f59cf79503d51836d61d56d50dc5bdf0e502e22
Adding RefBuffer to simplify reference buffer management. The struct has a
pointer to image data and scale factors relative to the current frame.
Change-Id: If38eb1491ff687cc11428aee339f3e052e2c5d9e
Moving back to scale_factors struct. We don't need anymore x_offset_q4 and
y_offset_q4 because both values are calculated locally inside vp9_scale_mv
function.
Change-Id: I78a2122ba253c428a14558bda0e78ece738d2b5b
Various cleanups and refactoring.
Removes feedback of active worst qaulity and uses last_q
instead to make the interface cleaner. Active worst quality
is now decided only once for a frame being coded in the
beginning based on last_q and other stats. Also, adds other
cleaups on last_q to store also the last_q for altref frames,
and reduces the altref interval a little.
The output does change a little.
derfraw300: +0.224% (global psnr)
stdhdraw250: +0.442% (global psnr)
Change-Id: Ie634cdc032697044c472dd0fe79c109b3e7f9767
This commit enables an adaptive prediction filter type selection
for sub8x8 block sizes. In speed 1, it re-uses the filter type of
collocated 8x8 block if it is tested in the rate-distortion optimization
loop, for the sub8x8 blocks. Otherwise, it runs the normal test
over all the three filter types. In speed 2, it re-uses the 8x8
block's prediction filter type, if available. Otherwise, force it
to be EIGHTTAP.
Compression and speed performance wise:
speed 1
derf -0.266%
yt -0.138%
bus at 2000 kbps: 33766ms -> 30451ms (10% speed-up)
football at 600 kbps: 48173ms -> 43786ms (9% speed-up)
speed 2
derf -0.026%
yt +0.134%
bus at 2000 kbps: 18973ms -> 17698ms (6% speed-up)
football at 600 kbps: 26748ms -> 25096ms (6% speed-up)
Change-Id: I77e097533b969fd3472147225fa79fc98095d342
Trying to make encode_sb() more similar to write_modes_sb() and
decode_mode_sb() because essentially all branching logic should be the
same.
Change-Id: Ib7dec7b48fce29418142abad4d1dcfdb1c770735
In evaluating partition split case, Wrong partition size is used in
calling partition_plane_context(). This commit change to use the
correct sub partition size. The incorrect partition size used were
causing an ASAN error in unit test.
Change-Id: Iab695b764bc51cc61580075f2ae4001421132362
In lossless coding, distortion is always 0. Early exit based on this
metric was incorrect.
This CL also changed to use best_rd instead of distortion as the metric
for easly exit as requested by Jim.
Change-Id: I8ef3e407ac03b4abc3283b273f936a68fad5c2ab
In the decoder we don't need to save eobs, we can pass eob as an argument.
That's why removing eob arrays from VP9Decompressor and TileWorkerData,
and moving eob pointer from macroblockd_plane to macroblock_plane.
Change-Id: I8eb919acc837acfb3abdd8319af63d1bbca8217a
E.g. disable vertical partioning for 4:2:2. Until we come up with something
better to do with the chroma block size, this prevents an assert error.
Change-Id: I9394fb3f14ec1343abc3ad4769de208e6278f285
We only need qcoeff buffers in the encoder. Reducing TileWorkerData struct
and VP9Decompressor struct sizes by 24K.
Change-Id: Id148868461f7ffa3d3dd634b371503ae9c57e207
The idea here is to allow "in frame" adjustment of the final Q
value used to encode each SB64, using segmentation.
There is also adjustment of the rd mult in regions of overspend.
Activated using aq_mode=2
Change-Id: I2f140cd898c9f877c32cd6d2e667f5e11ada4b1c
This function is called from vp9_setup_past_independence() which is called
before the modified piece of code. Moving reset of inter_mode_probs into
vp9_init_mbmode_probs() for consistency.
Change-Id: Ib188e8798e1fbe15407fd501406761b746fdda95
Since they used in encoder only. This commit also re-order includes
for the files that include vp9_extend.h
Change-Id: I929fc113f2135d3198cd1fc6a17434e5a2f8a459
Overall change (using dual buffer scheme for superblocks of both inter
and intra modes) reduces speed 2 runtime:
bluesky_1080p at 6000kbps: 263553ms -> 257441ms
riverbed_1080p at 8000kbps: 233230ms -> 225308ms.
Change-Id: Idf8d70f768a4b0d97b2a8506372c57b7b4022119
This commit enables the dual buffer rate-distortion optimization
and encoding scheme. It stacks the original transform coefficients,
quantized levels, and reconstructed coefficients, in the rate-
distortion optimization search process, hence eliminates the need
to re-run residual generation, forward transform, and quantization
in the encoding stage.
Change-Id: I011bfad3a59a380a869ee552e91dae0394ec492e
Allocate memory space of dual buffer sets that store the coeff, qcoeff,
dqcoeff, and eobs. Connect the pointers of macroblock_plane and
macroblockd_plane to the actual buffer in use accordingly.
Change-Id: I2f0b5f482ca879fae39095013eaf8901db20a5a4
Removed three members from the VP9_COMP data structure:
inter_zz_count, gf_bad_count, gf_update_recommended.
These were part of the VP8 real-time mode implementation
that was removed from the initial VP9 codecbase.
Change-Id: I866b083b88ef02c74837277d50ce532ca88492f3
replaces use of cur_tile_mi_(row|col)_(start|end) by VP9_COMMON, making
it less stateful and more reusable for parallel tile decoding
Change-Id: I1df09382b4567a0e5f4434825d47c79afe2399be
