This matches the behavior prior to generalizing the frame context
selection, and intuitively makes sense in that the first forward ref
is immediately after the keyframe, so it's quality is improved a bit
by using the keyframe's entropy context rather than the default.
Change-Id: Ia82cef79382b9d8cfafdc44ba0533d4dc3e44053
This commit restores the quality lost when the buffer-to-buffer copy
logic was removed. Note that this is specific to the current use of
golden frames and will need rework when RTC functionality is added.
Change-Id: I7324a75acd96eafd9e0f9b8633d782e390d5dc21
Previously there were two frame coding contexts tracked, one for normal
frames and one for alt-ref frames. Generalize this by signalling the
context to use in the bitstream, rather than tieing it to the alt ref
refresh bit. Also increase the number of contexts available to 4, which
may be useful for temporal scalability.
Change-Id: I7b66daaddd55c535c20cd16713541fab182b1662
Remove lst_fb_idx, gld_fb_idx, alt_fb_idx, refresh_last_frame,
refresh_golden_frame, refresh_alt_ref_frame from common. Gold/Alt are
encode side conventions. From the decoder's perspective, we want to be
dealing with numbered references.
Updates to active_ref 2 signal mode context switches, vestigial from
refresh_alt_ref_frame. This needs some clean up to make sense with
increased numbers of reference frames, as well as reimplementing the
swapping of alt/golden which was previously done using the
buffer-to-buffer copy mechanism removed in an earlier commit.
Change-Id: I7334445158b7666f9295d2a2dd22aa03f4485f58
Do reference counting the same way on the encoder as the decoder does,
rather than maintaining the 'flags' member of YV12_BUFFER_CONFIG.
Change-Id: I91dc210ffca081acaf9d5c09a06e7461b3c3139c
This is the first in a series of commits to add additional reference
frames to the codec. Each frame will be able to update any of the
available references, but copying between references is not
supported.
Change-Id: I5945b5ce6cc3582c495102b4e7eed4f08c44d5a1
These variables have the type int64_t, not long long. long long could
be a larger type than 64 bits. Emulate INT64_MAX for older versions of
MSVC, and remove the unreferenced vpx_ports/vpxtypes.h
Change-Id: Ideaca71838fcd3849d816d5ab17aa347c97d03b0
This experiment gives little gains and adds relatively much code
complexity (and it hinders other experiments), so let's get rid of
it.
Change-Id: Id25e79a137a1b8a01138aa27a1fa0ba4a2df274a
This prevents ill-defined behaviour, such as setting x->skip for a mode
that is excluded because of frame-level flags (e.g. filter selection,
compound prediction selection), then not breaking out of the RD loop
because the mode is not allowed, but keeping the flag on. Whatever mode
is iterated through next in the RD loop will then carry this flag, and
all sort of bad stuff happens, such as x->skip being set on intra pred
modes.
Change-Id: I5bec46b36e38292174acb1c564b3caf00a9b4b9a
Previous commit does not build cleanly on Jenkins with the DWT/DCT
hybrid experiment enabled (--enable-dwtdcthybrid).
Change-Id: Ia67e8f59d17ef2d5200ec6b90dfe6711ed6835a5
Fixes some scaling issues. Adds an option to only compute the
dct on the low-low subband for 32x32 and 64x64 blocks using
only a single 16x16 dct after 1 and 2 wavelet decomposition
levels respectively. Also adds an option to use a 8x8 dct
as building block.
Currenlty with the 2/6 filter and with a single 16x16 dct on
the low low band, the reuslts compared to full 32x32 dct is
as follows:
derf: -0.15%
yt: -0.29%
std-hd: -0.18%
hd: -0.6%
These are my current recommended settings, since the 2/6 filter
is very simple.
Results with 8x8 dct are about 0.3% worse.
Change-Id: I00100cdc96e32deced591985785ef0d06f325e44
This patch removes the old pred-filter experiment and replaces it
with one that is implemented using the switchable filter framework.
If the pred-filter experiment is enabled, three interopolation
filters are tested during mode selection; the standard 8-tap
interpolation filter, a sharp 8-tap filter and a (new) 8-tap
smoothing filter.
The 6-tap filter code has been preserved for now and if the
enable-6tap experiment is enabled (in addition to the pred-filter
experiment) the original 6-tap filter replaces the new 8-tap smooth
filter in the switchable mode.
The new experiment applies the prediction filter in cases of a
fractional-pel motion vector. Future patches will apply the filter
where the mv is pel-aligned and also to intra predicted blocks.
Change-Id: I08e8cba978f2bbf3019f8413f376b8e2cd85eba4
This is to add to the 64x64 transform experiment as an alternative to
a 64x64 DCT.
Two levels of wavelet decomposition is used on a 64x64 block, followed
by 16x16 DCT on the four lowest subbands. The highest three subbands
are left untransformed after the first level DWT.
Change-Id: I3d48d5800468d655191933894df6b46e15adca56
This is to fix a decoder crash when decoder skips a number of frame to
continue decoding from a later key frame.
Change-Id: I3ba116eba6c3440e0528a21f53745f694302e4ad
This commit did a couple of minor cleanup/refactoring to prepare for
futher loop filter experiments. It merged y_only version of loop filter
function into the regular one, which makes sure that same logic is used
for functions for picking level and for actual loop filtering.
Change-Id: Id10c94dccd45f58e5310bacfdf6ee63cbb60b86f
Mode selection for SBs could enter an infinite loop because
the interpolation filter mode index was not being reset
correctly.
Change-Id: I4bbe726f29ef5b6836e94884067c46084713cc11
Old Scheme:
When SWITCHABLE filter selection is enabled the encoder
evaluates the use of each interpolation filter type and
selects the best one to use at the MB level. A frame-
level flag can be set to force the use of a particular
filter type for all MBs in a frame if it is more efficient
to encode that way. The logic here involved a Q dependent
threshold that assumed that the second 8-tap filter was
a high-pass filter. However, this requires a trip around
the recode loop. If the frame-level flag indicates use
of a particular filter, the other filters are not
evaluated in the pick_mode loop.
New Scheme:
Each filter type is evaluated at the MB level and a record
of the best filter is kept, irrespective of what filter
is signaled at the frame-level. Once all MBs have been
encoded, a decision is made as to what frame-level mode
to set for the *next* frame. If one filter is used by 80%
or more of the MBs, then this filter is forced since it
is assumed that this will be more efficient if the
next frame has similar characteristics. i.e. there is a
one-frame lag between measuring the filter selection and
setting the frame-level mode to use.
Change-Id: I6a7e7ced8f27e120fafb99db2dc9c6293f8d20f7
Remove special case function cost_coeffs_2x2() and change function
cost_coeffs() to handle 2nd order haar block as it is handle all
other block types already.
Change-Id: I2aac6f81ee0ae9e03d6a8da4f8681d69b79ce41f
Various fixups to resolve issues when building vp9-preview under the more stringent
checks placed on the experimental branch.
Change-Id: I21749de83552e1e75c799003f849e6a0f1a35b07
Adds an experiment to derive the previous context of a coefficient
not just from the previous coefficient in the scan order but from a
combination of several neighboring coefficients previously encountered
in scan order. A precomputed table of neighbors for each location
for each scan type and block size is used. Currently 5 neighbors are
used.
Results are about 0.2% positive using a strategy where the max coef
magnitude from the 5 neigbors is used to derive the context.
Change-Id: Ie708b54d8e1898af742846ce2d1e2b0d89fd4ad5
This patch changes the token packing to call the bool encoder API rather
than inlining it into the token packing function, and similarly removes
a special get_signed case from the detokenizer. This allows easier
experimentation with changing the bool coder as a whole.
Change-Id: I52c3625bbe4960b68cfb873b0e39ade0c82f9e91
For coefficients, use int16_t (instead of short); for pixel values in
16-bit intermediates, use uint16_t (instead of unsigned short); for all
others, use uint8_t (instead of unsigned char).
Change-Id: I3619cd9abf106c3742eccc2e2f5e89a62774f7da
In some cases intra modes in inter frames give
an over smoothed appearance. Especially with
noisy but flat content.
Also in some cases there were problems with key
frame sizing again with very flat but noisy content.
These are temporary changes to help alleviate the
visual problems but will almost certainly hurt metric
results especially at the very low data rate end.
Change-Id: I11549179a19277ffc283d9788bc70168f2a8bdc9
