xmm6/xmm7 should be saved and restored for Windows x64; prevents an
encoder mismatch and some datarate issues.
Change-Id: Ifa1a82ab25fbdc5112d66f5332e14b16e69ac164
Rather than building an object file directory heirarchy matching the
source tree's layout, rename the object files so that the object
file name contains the path in the source file tree. The intent here
is to allow two files in different parts of the source tree to have
the same name and still not collide when put into an ar archive.
Change-Id: Id627737dc95ffc65b738501215f34a995148c5a2
Creates a merge between the master and experimental branches. Fixes a
number of conflicts in the build system to allow *either* VP8 or VP9
to be built. Specifically either:
$ configure --disable-vp9 $ configure --disable-vp8
--disable-unit-tests
VP9 still exports its symbols and files as VP8, so that will be
resolved in the next commit.
Unit tests are broken in VP9, but this isn't a new issue. They are
fixed upstream on origin/experimental as of this writing, but rebasing
this merge proved difficult, so will tackle that in a second merge
commit.
Change-Id: I2b7d852c18efd58d1ebc621b8041fe0260442c21
So that, in case of error, the arrays are not filled with trash
pointers that are attempted a free() during vp8mt_de_alloc_temp_buffers()
Change-Id: Ic074549c2903a43316510eb42e4f393e7d3ee528
Most of these were picked up by jenkins in the commit that changed
the vp8 namespace to vp9 in common/.
Change-Id: I5cbd56ffc753b92ef805133cda6acc1713a13878
For non-static functions, change the prefix to vp9_. For static functions,
remove the prefix. Also fix some comments, remove unused code or unused
function prototypes.
Change-Id: I1f8be05362f66060fe421c3d4c9a906fdf835de5
Most of these were picked up in the previous commit (prefix change from
vp8_ to vp9_), but I'm pushing this separately so that it's easier to
review.
Change-Id: Ifce2cdd6f008f4b1fbc2d89b5196d75e35fe115d
Most of these were picked up in the previous commit (prefix change from
vp8_ to vp9_), but I'm pushing this separately so that it's easier to
review.
Change-Id: I91e959895778b8632d7d33375523df8a7568a490
Converted the forward and inverse transforms to integer forms.
Modify #define TEST_INT 1/0
in the code to call integer/float version of transforms.
The tests showed that average OVERALL PSNR loss was less than 0.1%.
Change-Id: I1dfa4eeab6412597e3b970ce299cf0e116a917e6
As suggested by Paul, this commit separate the subpel refmv selection
into a separate experiment. It also changed a couple variable names
to better reflect the nature of the variables.
Change-Id: Id951c3cadc61a982dd15afe641000f60213b8995
This is the condition under which it is called in onyx_if.c. Also remove
the unused function print_mv_ref_cts().
Change-Id: I51ea3720d46f86d136e2215e01cf9d6c7dfc41ea
Two head files dct.h and dct_x86.h were removed in a previous commit,
this commit removed the build's dependency on the two files.
Change-Id: Idd33712470912d39d42f133dc30b710cab6fa832
Preparation for project restructuring.
Added vp9_ prefix on some function names that have global scope.
Added static declaration on some that dont.
Change-Id: If072f78b4300e8c17cfeed82c5d17b59946dcc5e
Previously, in evaluating reference motion vectors, MVs are always
rounded to integer pixel position and SADs are calculated. This
commit takes into account the subpixel portion of the mvs, and uses
bilinear interpolation to produce reference pixel values in subpixel
postions. In addition, SSE is used in place of SAD. Pixels used are
16x2 above and 2x16 to the left.
This commmit intends to test the potential of this line of work in
term of compression improvement, obviously, the change would increase
decoder complexity significantly.
Test results
std-hd: 1.738%(avg) 1.779%(glb), 1.663%(ssim)
derf: 0.472%(avg) 0.477%(glb), 0.418%(ssim)
Change-Id: I3ae1b098f6289df78891134d9a5e4bb2fde87a0b
Cleaned up some inconsistent references using both xd-> and
x->e_mbd. to access the same data structure in the same function.
Change-Id: Ieb496fa22bf1feec6aa7bc70b941ea4f16e0f8b5
Coding and costing of mv reference signal.
Issues in updating MV ref with COMPANDED_MVREF_THRESH
to be resolved. Ideally the MV precision should be defined based
on absolute MV magnitude not as now the MV ref magnitude.
Update to mv counts moved into bitstream.c because otherwise
if the motion reference is changed at the last minute the encoder
and decoder get out of step in terms of the counts used to update
entropy probs.
Code working on a few test clips but no results yet re benefit vs
signaling cost and no tuning of red loop to test lower cost alternatives
based on the available reference values.
Patch 3. Added check to make sure we don't pick a reference
that would give rise to an uncodeable / out of range residual.
Patch 6-7: Attempt to rebase. OK to submit but best to leave flag off for now.
Patch 9. Remove print no longer needed.
Change-Id: I1938c2ffe41afe6d3cf6ccc0cb2c5d404809a712
Quickly modified the ssse3 sixtap filters to support eight taps. For the test
clip used, a 23+% boost in decoder performance was seen. We can
revisit later and improve further.
Change-Id: I5f59860459e80d6fa23e6cc0fd91296a969f5240
Refactor per-transform copy & paste into a common function
update_coef_probs_common() and read_coef_probs_common(). The dry-run and
bit-writing loops in the encoder are still obvious candidates to be made
common, but they start to diverge a bit in the next commit, so are left
as-is for now.
Change-Id: I896bd3f4a073a6296eab7e92463fef79d8c6c08c
There is a macro DEFAULT_INTERP_FILTER defined in encoder/onyx_if.c that
is set as EIGHTTAP for now - so SWITCHABLE is not really used. Ideally,
this should be SWITCHABLE but that would make the encoder quite a bit slower.
We will change the default filter to SWITCHABLE once we find a faster way to
search for switchable filters.
Change-Id: Iee91832cdc07e6e14108d9b543130fdd12fc9874
The vp8_post_proc_down_and_across_mb_row_sse2() needs space for an
even number of macroblocks, as they are read two at a time for the
chroma planes. Round up the width during the allocation of
pp_limits_buffer to support this.
Change-Id: Ibfc10c7be290d961ab23ac3dde12a7bb96c12af0
* changes:
Fix another typo in 4x4-transform-for-i8x8-intra-pred coeff contexts.
8x8 transform support in splitmv.
Use SPLITMV_PARTITIONING instead of a plain integer type.
For splitmv, where partitioning is 8x16, 16x8 or 8x8, this patch
uses the 8x8 transform (instead of the 4x4) if txfm_mode is
ALLOW_8X8 or ALLOW_16X16. For TX_MODE_SELECT, splitmv can indicate
which of the 2 transform sizes (4x4 or 8x8) it wants to use.
Gains (with hybridtx4x4/8x8/16x16 and tx_select experiments
enabled) on derf: +0.9%, HD: +0.4%, STD/HD: +0.8% (SSIM or overall
PSNR, both metrics show similar improvements).
Change-Id: Ide954b000b415548ed92a7ac78e24f36e60fcf06
This can be used to distinguish between 16x8, 8x16, 8x8 and 4x4
partitioning modes when choosing splitmv as a MB mode.
Change-Id: Idc8b59772e1a80ccc4ad44d63c5c2ec3fc061a3c
It currently counts the probability that the branch is true, but it
should count the probability that the branch is false.
Change-Id: I963825da2e7a7ed3a613eb23ffd085e427dc36e5
Allows B_VL_PRED & B_LD_PRED modes to be used for all blocks
within a MB in B_PRED mode. These modes were temporarily
disabled with super-block coding.
Change-Id: I973b9bdb82c3da5f12d7cc963162a28805f25303
First sse2 version of vp8_mbloop_filter_vertical_edge(). For now,
intrinsics are being used until the bitstream is finalized. This function
will be revisited later for further performance improvements.
For the test clip used, a 34+% decoder performance improvement
was seen. This will vary depending on material.
Change-Id: I455b438bc8d8af76cf7533ac42eda5f689b21f7c
There were several different methods for calculating bitstream
probabilities in use. Consolodate these into a pair of functions,
get_prob() and get_binary_prob().
Change-Id: I5534f517f74027fee16d89c9baefaafea8156b2f
