Extend buffer write validation (overflow check) to single token
partition packing, both mb and row based functions.
Change-Id: I36e19b7d37fc43712d05c70e3ad223d3eb5b973d
Patch set 2: 64 bit build fix
Patch set 3: 64 bit crash fix
[Tero]
Patch set 4: Updated ARMv6 and NEON assembly.
Added also minor NEON optimizations to subtract
functions.
Patch set 5: x86 stride bug fix
Change-Id: I1fcca93e90c89b89ddc204e1c18f208682675c15
The calculated frame_rate is a state variable in the codec, and
shouldn't be maintained in the configuration struct. Move it to the
main part of cpi so that it isn't clobbered when the configuration
struct is updated. The initial framerate estimate is moved from the
vp8_cx_iface.c wrapper into the body of init_config() in onyx_if.c, so
that it is only called once and not reset on every call to
vp8_change_config().
Change-Id: I8d9a3d1283330d1ee297d07e9d78d1f2875f2465
Ronald recently sent me this patch that he did in April.
> From: Ronald S. Bultje <rbultje@google.com>
> Date: Thu, 28 Apr 2011 17:30:15 -0700
> Subject: [PATCH] SSE2 optimizations for
> vp8_build_intra_predictors_mby{,_s}().
HD decode tests have shown a performance boost up to 1.5%,
depending on material.
Patch set 3: Fixed encoder crash.
Change-Id: Ie1fd1fa3dc750eec1a7a20bfa2decc079dcf48c8
Call the idct/add after the tokenize. This is WIP with
the goal of creating a common idct/add for the encoder and
decoder. This move is necessary because the decoder's version
of the idct clobbers qcoeff, which is used by the tokenize.
Change-Id: I6b08d8e8397cd873647fa4fb9469884e3c876756
Added ARM optimized intra 4x4 prediction
- 2x faster on Profiler compared to C-code compiled with -O3
- Function interface changed a little to improve BLOCKD structure
access
Change-Id: I9bc2b723155943fe0cf03dd9ca5f1760f7a81f54
The referenced function (SignalObjectAndWait) isn't used. Reduces the
warnings with mingw32-w64 which defines this.
Change-Id: I4ce592879ec9372bf196dac640204c4d370bd210
vp8cx_mb_init_quantizer() needs to be called at least once to get
all values calculated. This change added one check to decide if
we could skip initialization or not.
Change-Id: I3f65eb548be57580a61444328336bc18c25c085b
Added code to clip the buffer level to the maximum buffer
size. Without this the buffer level would increase
unchecked.
This bug was found when encoding an essentially static
scene at 2Mb/s. The encoder is unable to generate frames
consistent with the high data-rate because Q bottoms out
at Qmin.
As frames generated are consistently undersized the buffer
level increases and does not get checked against the
maximum size specified by the user (or default).
Change-Id: Id8a3c6323d3246da50f7cb53ddbf78b5528032c6
Fix compiler warning for passing a non const array
to a function expecting a const array by using an
intermediary pointer and casting.
Change-Id: I9bdd358ebdc926223993fb8fb2098ffedd2f3fc7
Changed 'int eob' to 'char *eob' in BLOCKD so that both encoder and
decoder will use eobs[25] array from MACROBLOCKD structure. In future,
this will enable use of the decoder side IDCT in the encoder.
Change-Id: I6e1c011628cb8864fd4a0b80f0279ce16a5ca978
Adding support for several partitions within one input fragment.
This is necessary to fully support all possible packetization
combinations in the VP8 RTP profile. Several partitions can
be transmitted in the same packet, and they can only be split
by reading the partition lengths from the bitstream.
Change-Id: If7d7ea331cc78cb7efd74c4a976b720c9a655463
In some situations (f.g. error-resilient is turned on), vp8cx_mb
_init_quantizer() was called once per macroblock. Added checks
to avoid calculations when there is no change.
Change-Id: Ie4f0a5ade2202041254990a4e9d5b03bd1ac5aea
It is discovered that in rare situations the 2nd order block may
produce a few small magnitude coefficients that has no effect on
reconstruction. The situations are a combination of low quantizer
values (high quality) and low energy in residual signals (content
dependent). This commit added code to detect such cases and reset
the 2nd order block to all 0.
Patch 1 to 4 used code to do all-zero-check on idct result buffer,
and tests on derf set showed a consistent gain of .12%-.14% on all
metrics.But due to a recent change Ie31d90b, the idct result buffer
is not longer populated. So patch 5&6 use an alternative method to
detect the situations. Tests on derf set now shows a consistent
quality gain of .16%-.20%.
As suggested by Jim, Patch 7&8 removed the condition of all first
order block not having any coefficient, instead we reset 2nd order
coefficients to all 0 if sum of absolute value of the coefficients
is small. So it does slightly more than just detecting the oddity
as discussed above, but tests on derf set now show a consistent
gain of .20%-.23% on all metrics.
It is worth noting here that this change does not have any effect
on mid/high quantizer range, it only affects the quantizer value
18 or blow. Within this range, the change helps compression by up
to 2.5% on clips in the derf set.
Change-Id: I718e19cf59a4fc2462cb7070832759beb9f7e7dd
Tests showed ~1.2% performance boost on the HD clip used.
Performance will vary based on material.
Change-Id: Icbcf1a828750d5b4ae5252bf596b3ef594042e8a
Interleaved vp8_find_near_mvs and vp8_mv_ref_probs.
2.5% to 4% performance improvement for the HD clips used.
Change-Id: Id888b667cf5ae2f0e19da18743140f055ff7de8d
The partial frame copy function used to copy an extra 8 lines above
and below. The partial frame filtering can only modify 3 pixel rows
above the partial frame. Reduce copy to bare minimum needed, which is
4 lines, so that partial filtering on copied frame is possible.
Define the "magic" fraction number for partial filtering in
loopfilter.h .
Change-Id: I4791ffc541b6884b12759a0d0714a8faf16147ec
Restructure if statement to clarify the error condition. Trigger the
error before clobbering pc-> variables.
Change-Id: Id01cab798a341ce9899078fdcec265a0e942a0b7
Decode the mv mode with if-then-elses instead of traversing
the vp8_mv_ref_tree data structure. This will make it
easier to interleave vp8_find_near_mvs and vp8_mv_ref_probs.
Change-Id: I1e798d6ec40fcaeeff06ccc82f81201978d12f74
check to make sure that cx_data buffer has enough room before
writting to it, prior behavior did not which could result in a crash.
Change-Id: I3fab6f2bc4a96d7c675ea81acd39ece121738b28
During the _pick only the Y plane is examined. In addition, data beyond
the borders of the frame is not read.
Change-Id: Ic549adfca70fc6e0b55f8aab0efe81f0afac89f9
Instead of using the predict buffer, the decoder now writes
the predictor into the recon buffer. For blocks with eob=0,
unnecessary idcts can be eliminated. This gave a performance
boost of ~1.8% for the HD clips used.
Tero: Added needed changes to ARM side and scheduled some
assembly code to prevent interlocks.
Patch Set 6: Merged (I1bcdca7a95aacc3a181b9faa6b10e3a71ee24df3)
into this commit because of similarities in the idct
functions.
Patch Set 7: EC bug fix.
Change-Id: Ie31d90b5d3522e1108163f2ac491e455e3f955e6
It was crashing when number of partitions was bigger than the number
of MB rows (ex. 128x96 with 8 partitions).
Start point was not checked against mb_rows, plus extra
"empty" partitions were not written out.
Change-Id: I9c2f013b9ec022354b658fab4ef799ff8b1de93d
Added the ability to create rate-targeted, temporally
scalable, VP8 compatible bitstreams.
The application vp8_scalable_patterns.c demonstrates how
to use this capability. Users can create output bitstreams
containing upto 5 temporally separable streams encoded
as a single VP8 bitstream.
(previously abandoned as:
I92d1483e887adb274d07ce9e567e4d0314881b0a)
Change-Id: I156250a3fe930be57c069d508c41b6a7a4ea8d6a
buffer_level in VP8_COMP and starting_buffer_level, optimal_buffer_level
and maximum_buffer_size in VP8_CONFIG changed from int to int64_t
to avoid potential crash issues for larger target bit rates.
Change-Id: I0d5ab6c8a44c2fef51f30cd8df4bb4b739c5df26
Previous entropy probs need to be saved (and restored) only when
current updates are not propagated.
Change-Id: Ie6ee0543066e30874e56258be0a6b7d2dd2fdb2b
Uninitialized data could be written to the first pass file when no
motion vectors are present in the frame.
Also fix a number of compiler warnings.
Change-Id: Icc9f53b6d33da9de4563d86d9fd591910473ea90
The data processed by the loopfilter overlaps. At the block level, this
results in some redundant transforms. Grouping the filtering allows for
a single 16x16 transpose (and inversion) instead of three 16x8 transposes
(and three more inversions).
This implementation is x86_64 only. We retain the previous
implementation for x86.
Improvements are obviously material dependant, but it seems to be ~%1 in
tests here.
Change-Id: I467b7ec3655be98fb5f1a94b5d145e5e5a660007
vp8_find_near_mvs() is being called on all possible reference frames
but the data computed may be used if the loop exits early, which can
be due to x->skip beign set to 1.
Optimize this by call vp8_find_near_mvs() laziy only if it is going
to be used and not computed yet.
Change-Id: Iccdbd4c962a670c9f2c99b8aca8096042ca5dc98
Changes to the selection of Q limits for two pass
and two pass CQ mode.
Allowance made for Mode and motion vector costs.
Some refactoring of common code.
For Derf and YT sets CQ mode average improvement
circa 1% (SSIM and Global PSNR).
Some increased tendency to undershoot even when
user CQ not reached.
Patch2: Removed some test code accidentally merged.
Change-Id: Icf74d13af77437c08602571dc7a97e747cce5066
Sync with loopfilter thread just at the beginning of next frame encoding.
This returns control to application faster and allows a better multicore scaling.
When PSNR packets are generated the final filtered frame is needed imediatly
so we cannot delay the sync.
Change-Id: I288d97b5e331d41d6f5bb49d97986fa12ac6f066
Make sure that this header is listed as one of the sources, so that it
will be installed if necessary.
Change-Id: I2427e494488126b179151dc21043c1e2c8ba5991
- Removed fast_fdct4x4_neon and fast_fdct8x4_neon
- Uses now short_fdct4x4 and short_fdct8x4
- Gives ~1-2% speed-up on Cortex-A8/A9
Change-Id: Ib62f2cb2080ae719f8fa1d518a3a5e71278a41ec
Rd and Rm registers should be different in 'mul'. This register
combination results in unpredictable behaviour. GCC will give
a warning and RVCT an error in this case.
Restriction applies only to armv5 targets and not for armv6 and above.
Change-Id: I378d17c51e1f16a6820814fbed43e115aaabb03e
These changes fixes a glitch between the RTP profile and the input
partitions interface. Since there's no way for the user to know the
actual number of partitions, the decoder have to read the
multi_token_paritition bits also when input partitions mode is
enabled.
Included are also a couple of fixes for issues with independent
partitions and uninitialized memory reads.
Change-Id: I6f93b15287d291169ed681898ed3fbcc5dc81837
- Updated walsh transform to match C
(based on Change Id24f3392)
- Changed fast_fdct4x4 and 8x4 to short_fdct4x4 and 8x4
correspondingly
Change-Id: I704e862f40e315b0a79997633c7bd9c347166a8e
Modified original patch If2f07220885c4c3a0cae0dace34ea0e36124f001
according to comments. Scheduled code a little bit to prevent some
interlocks.
Change-Id: I338f02b881098782f82af63d97f042b85e63e902
In the "Removed bmi copy to/from BLOCKD" commit, the copy
to the bmi in BLOCKD was eliminated. The clamp_mvs() used
the bmi in BLOCKD, which now contains incorrect values. This
patch fixes this problem.
Change-Id: I8eca1eaf4015052b0b63e90876f7ad321aba7cff
vp8_update_zbin_extra() is called all the time even though the fast
quantizer doesn't use it. Skip this call if fast quantizer is used.
Change-Id: Ia711c38431930cc2486cf59b8466060ef0e9d9db
This change makes sure that no key frame recoding in real-time mode
even if CONFIG_REALTIME_ONLY is not configured.
Change-Id: Ifc34141f3217a6bb63cc087d78b111fadb35eec2
for SPLITMV and B_PRED modes. Modified code to use the bmi
found in mode_info_context instead of BLOCKD. On the decode
side, the uvmvs are calculated only when required, instead of
every macroblock. This is WIP. (bmi should eventually be
removed from BLOCKD)
Small performance gains noticed for RT encodes and decodes.(VGA)
Change-Id: I2ed7f0fd5ca733655df684aa82da575c77a973e7
Prepend idct function names with vp8_
so that under profiling they show up
associated with libvpx.
Change-Id: I4fe357b50236cb7730a4cc00164c0a3487a1d8b4
The data that the simple horizontal loopfilter reads is aligned, treat
it accordingly.
For the vertical, we only use the bottom 4 bytes, so don't read in 16
(and incur the penalty for unaligned access).
This shows a small improvement on older processors which have a
significant penalty for unaligned reads.
postproc_mmx.c is unused
Change-Id: I87b29bbc0c3b19ee1ca1de3c4f47332a53087b3d
Prepend . to local labels in assembly code. This
allows non unique labels within a file. Also
makes profiling information more informative
by keeping the function name with the loop name.
Change-Id: I7a983cb3a5ba2413d5dafd0a37936b268fb9e37f
Calculations were incorrectly classified as either
SSE3 or SSSE3. Only using SSE2 instructions.
Cleanup function names and make non-RTCD code work
as well.
Change-Id: I48ad0218af0cc51c5078070a08511dee43ecfe09
Calculations were incorrectly classified as either
SSE3 or SSSE3. Only using SSE2 instructions.
Cleanup function names and make non-RTCD code work
as well.
Change-Id: I29f5c2ead342b2086a468029c15e2c1d948b5d97
When active map is specified and the current frame is not a key frame,
golden frame nor a altref frame then copy only those active regions.
This significantly reduces encoding time by as much as 19% on the test
system where realtime encoding is used. This is particularly useful
when the frame size is large (e.g. 2560x1600) and there's only a few
action macroblocks.
Change-Id: If394a813ec2df5a0201745d1348dbde4278f7ad4
Instead of a single mid GF boost apply a few extra bits to
every other frame. This gives a very small average metrics
improvement on both derf and YT sets.
Also use min GF interval as min KF interval.
Change-Id: Iee238b8cae0ffaed850a5a944ac825cee18da485
Since the block will be interpreted as an inter block, the mode will
be interpreted as a motion vector, resulting in bad concealment.
Change-Id: Ifcc685ae1cc883492bce6dbd61e418d91a89b053
Since the block will be interpreted as an inter block, the mode will
be interpreted as a motion vector, resulting in bad concealment.
Change-Id: Ifcc685ae1cc883492bce6dbd61e418d91a89b053
This reverts commit b5ea2fbc2c. Further
testing showed noticable keyframe popping in some cases, reverting this
for now to give time for a proper fix.
Conflicts:
vp8/encoder/onyx_if.c
vp8/encoder/ratectrl.c
Change-Id: I159f53d1bf0e24c035754ab3ded8ccfd58fd04af
EC expects the subblock MVs to be populated, but
f1d6cc79e4 removed this code. This
commit restores it, protected by CONFIG_ERROR_CONCEALMENT. May move this
to the EC code more directly in the future.
Change-Id: I44f8f985720cb9a1bf222e59143f9e69abf56ad2
When error concealment is enabled the first key frame must
be successfully received before error concealment is activated.
Error concealment will be activated when the delta following
delta frame is received.
Also fixed a couple of bugs related to error tracking in
multi-threading. And avoiding decoding corrupt residual
when we have multiple non-resilient partitions.
Change-Id: I45c4bb296e2f05f57624aef500a874faf431a60d
This patch fixes an OOB read when error concealment is enabled and the
partition sizes are corrupt. The partition size read from the bitstream
was not being validated in EC mode.
Change-Id: Ia81dfd4bce1ab29ee78e42320abe52cee8318974
EC expects the subblock MVs to be populated, but
f1d6cc79e4 removed this code. This
commit restores it, protected by CONFIG_ERROR_CONCEALMENT. May move this
to the EC code more directly in the future.
Change-Id: I44f8f985720cb9a1bf222e59143f9e69abf56ad2
When error concealment is enabled the first key frame must
be successfully received before error concealment is activated.
Error concealment will be activated when the delta following
delta frame is received.
Also fixed a couple of bugs related to error tracking in
multi-threading. And avoiding decoding corrupt residual
when we have multiple non-resilient partitions.
Change-Id: I45c4bb296e2f05f57624aef500a874faf431a60d
This patch fixes an OOB read when error concealment is enabled and the
partition sizes are corrupt. The partition size read from the bitstream
was not being validated in EC mode.
Change-Id: Ia81dfd4bce1ab29ee78e42320abe52cee8318974
This patch fixes a bug in the interaction between the recode loop and
spatial resampling. If the codec was in a spatial resampling state,
and a subsequent iteration of the recode loop disables resampling,
then the source buffer must be reset to the unscaled source.
Change-Id: I4e4cd47b943f6cd26a47449dc7f4255b38e27c77
Changed motion search in vp8_find_best_half_pixel_step() to be the
same as in vp8_find_best_sub_pixel_step(), which checks 5 points
instead of 8 points. This only affects real-time mode with
cpu-used >=9. Tests showed it gives 2% encoding speedup with
a quality loss(psnr) of up to 0.5%.
Change-Id: I16049cad1535002346d46cfdfad345bfc3dc5146
the neon code made several assumptions which were broken by a recent
change: https://review.webmproject.org/2676
update the code with new assumptions and guard them with a compile time
assert
Change-Id: I32a8378030759966068f34618d7b4b1b02e101a0
Since this is the only ABI incompatible change since the last release,
convert it to use the control interface instead. The member of the
configuration struct is replaced with the VP8E_SET_MAX_INTRA_BITRATE_PCT
control.
More significant API changes were expected to be forthcoming when this
control was first introduced, and while they continue to be expected,
it's not worth breaking compatibility for only this change.
Change-Id: I799d8dbe24c8bc9c241e0b7743b2b64f81327d59
This change implemented same idea in change "Preload reference area
to an intermediate buffer in sub-pixel motion search." The changes
were made to vp8_find_best_sub_pixel_step() and vp8_find_best_half
_pixel_step() functions which are called when speed >= 5. Test
result (using tulip clip):
1. On Core2 Quad machine(Linux)
rt mode, speed (-5 ~ -8), encoding speed gain: 2% ~ 3%
rt mode, speed (-9 ~ -11), encoding speed gain: 1% ~ 2%
rt mode, speed (-12 ~ -14), no noticeable encoding speed gain
2. On Xeon machine(Linux)
Test on speed (-5 ~ -14) didn't show noticeable speed change.
Change-Id: I21bec2d6e7fbe541fcc0f4c0366bbdf3e2076aa2
There were some situations that the start motion vectors were
out of range. This fix adjusted range checks to make sure they
are checked and clamped.
Change-Id: Ife83b7fed0882bba6d1fa559b6e63c054fd5065d
sharpness was not recalculated in vp8cx_pick_filter_level_fast
remove last_filter_type. all values are calculated, don't need to update
the lfi data when it changes.
always use cm->sharpness_level. the extra indirection was annoying.
don't track last frame_type or sharpness_level manually. frame type
only matters for motion search and sharpness_level is taken care of in
frame_init
move function declarations to their proper header
Change-Id: I7ef037bd4bf8cf5e37d2d36bd03b5e22a2ad91db
In sub-pixel motion search, the search range is small(+/- 3 pixels).
Preload whole search area from reference buffer into a 32-byte
aligned buffer. Then in search, load reference data from this buffer
instead. This keeps data in cache, and reduces the crossing cache-
line penalty. For tulip clip, tests on Intel Core2 Quad machine(linux)
showed encoder speed improvement:
3.4% at --rt --cpu-used =-4
2.8% at --rt --cpu-used =-3
2.3% at --rt --cpu-used =-2
2.2% at --rt --cpu-used =-1
Test on Atom notebook showed only 1.1% speed improvement(speed=-4).
Test on Xeon machine also showed less improvement, since unaligned
data access latency is greatly reduced in newer cores.
Next, I will apply similar idea to other 2 sub-pixel search functions
for encoding speed > 4.
Make this change exclusively for x86 platforms.
Change-Id: Ia7bb9f56169eac0f01009fe2b2f2ab5b61d2eb2f
This is done by expanding luma row to 32-byte alignment, since
there is currently a bunch of code that assumes that
uv_stride == y_stride/2 (see, for example, vp8/common/postproc.c,
common/reconinter.c, common/arm/neon/recon16x16mb_neon.asm,
encoder/temporal_filter.c, and possibly others; I haven't done a
full audit).
It also uses replaces the hardcoded border of 16 in a number of
encoder buffers with VP8BORDERINPIXELS (currently 32), as the
chroma rows start at an offset of border/2.
Together, these two changes have the nice advantage that simply
dumping the frame memory as a contiguous blob produces a valid,
if padded, image.
Change-Id: Iaf5ea722ae5c82d5daa50f6e2dade9de753f1003
allowing the compiler to inline this function. For real-time
encodes, this gave a boost of 1% to 2.5%, depending on the
speed setting.
Change-Id: I3929d176cca086b4261267b848419d5bcff21c02
This patch attempts to improve the handling of CBR streams with
respect to the short term buffering requirements. The "buffer level"
is changed to be an average over the rc buffer, rather than a long
running average. Overshoot is also tracked over the same interval
and the golden frame targets suppressed accordingly to correct for
overly aggressive boosting.
Testing shows that this is fairly consistently positive in one
metric or another -- some clips that show significant decreases
in quality have better buffering characteristics, others show
improvenents in both.
Change-Id: I924c89aa9bdb210271f2e03311e63de3f1f8f920
Optimized C-code of the following functions:
- vp8_tokenize_mb
- tokenize1st_order_b
- tokenize2nd_order_b
Gives ~1-5% speed-up for RT encoding on Cortex-A8/A9
depending on encoding parameters.
Change-Id: I6be86104a589a06dcbc9ed3318e8bf264ef4176c
Do mvp clamping in full-pixel precision instead of 1/8-pixel
precision to avoid error caused by right shifting operation.
Also, further fixed the motion vector limit calculation in change:
b748045470
Change-Id: Ied88a4f7ddfb0476eb9f7afc6ceeddbf209fffd7
Separate simple filter with reduced no. of parameters.
MB filter level picking based on precalculated table. Level table updated for
each frame. Inside and edge limits precalculated and updated just when
sharpness changes. HEV threshhold is constant.
ARM targets use scalars and others vectors.
Change works only with --target=generic-gnu
All other targets have to be updated!
Change-Id: I6b73aca6b525075b20129a371699b2561bd4d51c
Allow the encoder to inform the application that the encoded frame will not
be used as a reference.
Change-Id: I90e41962325ef73d44da03327deb340d6f7f4860
Motion vector limits are calculated using right shifts, which
could give wrong results for negative numbers. James Berry's
test on one clip showed encoder produced some artifacts. This
change fixed that.
Change-Id: I035fc02280b10455b7f6eb388f7c2e33b796b018
In this commit I have added an experimental function
that tests prediction quality either side of a central position
to calculate a suggested boost number for an ARF frame.
The function is passed an offset from the current position and
a number of frames to search forwards and backwards.
It returns a forward, backward and compound boost number.
The new code can be deactivated using #define NEW_BOOST 0
In its current default state the code searches forwards and backwards
from the proposed position of the next alt ref.
The the old code used a boost number calculated by scanning forward
from the previous GF up to the proposed alt ref frame position.
I have also added some code to try and prevent placement of a gf/arf
where there is a brief flash.
Change-Id: I98af789a5181148659f10dd5dd2ff2d4250cd51c
There were many instances in the code of vp8_coef_tokens and
vp8_coef_tokens-1, which was a preprocessor macro despite the naming
convention. Replace these with MAX_ENTROPY_TOKENS and ENTROPY_NODES,
respectively.
Change-Id: I72c4f6c7634c94e1fa066cd511471e5592c748da
With this commit frames can be received partition-by-partition
from the encoder and passed partition-by-partition to the
decoder.
At the encoder-side this makes it easier to split encoded
frames at partition boundaries, useful when packetizing
frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled,
several VPX_CODEC_CX_FRAME_PKT packets will be returned
from vpx_codec_get_cx_data(), containing one partition
each. The partition_id (starting at 0) specifies the decoding
order of the partitions. All partitions but the last has
the VPX_FRAME_IS_FRAGMENT flag set.
At the decoder this opens up the possibility of decoding partition
N even though partition N-1 was lost (given that independent
partitioning has been enabled in the encoder) if more info
about the missing parts of the stream is available through
external signaling.
Each partition is passed to the decoder through the
vpx_codec_decode() function, with the data pointer pointing
to the start of the partition, and with data_sz equal to the
size of the partition. Missing partitions can be signaled to
the decoder by setting data != NULL and data_sz = 0. When
all partitions have been given to the decoder "end of data"
should be signaled by calling vpx_codec_decode() with
data = NULL and data_sz = 0.
The first partition is the first partition according to the
VP8 bitstream + the uncompressed data chunk + DCT address
offsets if multiple residual partitions are used.
Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74
Adding support in the encoder for generating
independent residual partitions by forcing
equal probabilities over the prev coef entropy
contexts.
Change-Id: I402f5c353255f3ca20eae2620af739f6a498cd21
The current code stores pointers to coefficient tables and loads them to
access the tables contents. As these pointers are stored in the code
sections, it means we end up with text relocations. eu-findtextrel will
thus complain about code not compiled with -fpic/-fPIC.
Since the pointers are stored in the code sections, we can actually cheat
and let the assembler generate relative addressing when accessing the
coefficient tables, and just load their location with adr.
Change-Id: Ib74ae2d3f2bab80b29991355f2dbe6955f38f6ae
Also includes a couple of error concealment bug fixes:
- the segment_id wasn't properly initialized when missing
- when interpolating and no neighbors are found, set to zero
- clear the qcoef buffer when concealing an MB
Change-Id: Id79c876b41d78b559a2241e9cd0fd2cae6198f49
Only the first frame buffer ref counter was being initialized
because the index was fixed at 0 rather than using i.
Change-Id: Ib842298be4a5e3607f9e21c2cd4bfbee4054ffc4
I got this idea from Pascal (Thanks). Before encoding a macroblock,
copy it to a 16x16 buffer, and then read source data from there
instead. This will help keep the source data in cache, and help
with the performance.
Change-Id: Id05f4cb601299150511d59dcba0ae62c49b5b757
This reverts commit 212f618373.
Further testing shows that the overshoot accumulation/damping is too
aggressive on some clips. Allowing the accumulated overshoot to
decay and limiting to damping to golden frames shows some promise.
But some clips show significant overshoot in the buffer window, so
I think this still needs work.
Change-Id: Ic02a9ca34f55229f9cc04786f4fab54cdc1a3ef5
vp8_yv12_copy_frame_ptr() expects same size
buffers which was not previously gaurenteed.
Using an improperly allocated buffer would
cause a crash before.
Change-Id: I904982313ce9352474f80de842013dcd89f48685
RDMULT/RDDIV defines a bit worth of distortion in term of sum squared
difference. This has also been used as errorperbit in subpixel motion
search, where the distortions computed as variance of the difference.
The variance of differences is different from sum squared differences
by amount of DC squared. Typically, for inter predicted MBs, this
difference averages around 10% between the two distortion, so this patch
introduces a 110% constant in deriving errorperbit from RDMULT/RDDIV.
Test on CIF set shows small but positive gain on overall PSNR (.03%)
and SSIM (.07%), overall impact on average PSNR is 0.
Change-Id: I95425f922d037b4d96083064a10c7cdd4948ee62
Relocated the vp8dx_bool_decoder_fill() call, allowing
the compiler to produce better assembly code. Tests
showed a 1 - 2 % performance boost (x86 using gcc)
for the 720p clip used.
Change-Id: Ic5a4eefed8777e6eefa007d4f12dfc7e64482732
The starting points are always within the limits, and bounds
checking on these points is not needed. For speed < 5, the
encoded result changes a little because different treatment
is taken while starting point equals the bounds.
Change-Id: I09a402d310f51e305a3519f1601b1d17b05c6152
Modify the second-pass code to provide a full golden-frame (GF) bit
allocation boost if the past GF group (GFG) had no alt-ref frame (ARF),
even if the current GFG does contain and ARF.
This mostly has no effect on clips, since switching ARFs on/off between
GFGs is not very common. Has a positive effect on e.g. cheer (+0.45 SSIM
at 600kbps) and football (+0.25 SSIM at 600kbps), particularly at high
bitrates. Has a negative effect (-0.04 SSIM at 300kbps) at pamphlet,
which appears only marginally related to this patch, and crew (-0.1 SSIM
at 700kbps).
Change-Id: I2e32899638b59f857e26efeac18a82e0c0b77089
The BPRED mode selection uses SSE as a distortion metric, but the early
breakout threshold being used was a variance value.
Change-Id: I42d4602fb9b548bf681a36445701fada5e73aff1
firstpass.c contains some rate adjustment code that assures that the
last few frames in a sequence abide by rate limits. If the second-to-
last group of frames contains an alt-ref frame (ARF), the last golden
frame (GF) is zero bytes, and we will thus spend a ridiculously high
number of bits on regular P-frames trying to hit the target rate. This
does slightly enhance the quality of these last few frames, but has
no perceptual value (other than hitting the target rate).
Disabling this code means we consistently (slightly) undershoot the
target rate and consequently do worse on the last few frames of a
clip, which is particularly noticeable for small clips. The quality-
per-bitrate is generally better, ~0.2% better overall on derf-set,
especially on clips such as garden, tennis, foreman at low bitrates.
Has a negative effect on hallmonitor at high bitrates.
Change-Id: I1d63452fef5fee4a0ad2fb2e9af4c9f2e0d86d23
Moved encode_intra function from firstpass.c to encodeintra.c to
prevent linking problem in real-time only build. Also changed name
of the function to vp8_encode_intra because it is not a static.
Change-Id: Ibf3c6c1de3152567347e5fbef47d1d39564620a5
If setup_token_decoder reported an internal error the memory allocated
there would not be freed in the resulting call to _remove_decompressor.
Change-Id: Ib459de222d76b1910d6f449cdcd01663447dbdf6
Small decode performance gain (~1%) on keyframes. No
noticeable gains on encode. Also changed pick_intra4x4mby_modes()
to read the above and left block modes for keyframes only.
Change-Id: I1f4885252f5b3e9caf04d4e01e643960f910aba5
Since BPRED will be tested at most once, and SPLITMV is not enabled,
there's nothing to clobber the subblock modes, so there's no need to
save and restore them.
Change-Id: I7c3615b69190c10bd068a44df5488d6e8b85a364
In activity masking, RDO constant RDMULT is adjusted on a per MB basis
adaptive to activity with the MB. errorperbit, which is defined as
RDMULT/RDDIV, is a constant used in motion estimation. Previously, in
activity masking, errorperbit is not changed even when RDMULT is changed.
This commit changed to adjust errorperbit according to the change in
RDMULT.
Test in cif set showed a very small but consistent gain by all quality
metrics (average, overall psnr and ssim) when activity masking is on.
Change-Id: I07ded3e852919ab76757691939fe435328273823
This change is analogous to I0b67dae1f8a74902378da7bdf565e39ab832dda7,
which made the move for the non-RD path.
Change-Id: If63fc1b0cd1eb7f932e710f83ff24d91454f8ed1
This commit moves the intra block mode selection from encodeframe.c
to pickinter.c (in the non-RD case). This allowed pick_intra_mbuv_mode
and pick_intra4x4mby_modes to be made static, and is a step towards
refactoring intra mode selection in the main pickinter loop. Gave a
small perf increase (~0.5%).
Change-Id: I0b67dae1f8a74902378da7bdf565e39ab832dda7
Some further re-structuring of activity masking code.
Still has various experimental switches.
Supports a metric based on intra encode.
Experimental comparison against a fixed activity target rather
than a frame average, for altering rd and zbin.
Overall the SSIM performance is similar to TT's original
code but there is a much smaller PSNR hit of circa
0.5% instead of 3.2%
Change-Id: I0fd53b2dfb60620b3f74d7415e0b81c1ac58c39a
While investigating the effect of DC values on SAD and SSE in motion
estimation, a side finding indicates the two table of constants need
be adjusted. The adjustment was done by multiplying old constants by
90% with rounding. Also absorb the 1/2 scaling constant into the two
tables. Refer to change Ifa285c3e for background of the 1/2 factor.
Cif set test showed a very small gain on all metric.
Change-Id: I04333527a823371175dd46cb04a817e5b9a8b752
The encoder defined about 4 set of similar functions to calculate sum,
variance or sse or a combination of them. This commit removed one set
of these functions, get8x8var and get16x16var, where calls to the later
function are replaced with var16x16 by using the fact on a 16x16 MB:
variance == sse - sum*sum/256
Change-Id: I803eabd1fb3ab177780a40338cbd596dffaed267
In real-time mode motion search, there is no need to calculate
variance. This change improved encoding speed by 1% ~ 2%(speed=-5).
Change-Id: I65b874901eb599ac38fe8cf9cad898c14138d431
This patch attempts to reduce the peak bitrate hit by the encoder
when using small buffer windows.
Tested on the CIF set over 200-500kbps using these settings:
--buf-sz=500 --buf-initial-sz=250 --buf-optimal-sz=250 \
--undershoot-pct=100
Two pass encodes were tested at best quality. One pass encodes were
tested only at realtime speed 4:
--rt --cpu-used=-4
The peak datarate (over the specified 500ms window) was measured
for each encode, and averaged together to get metric for
"average peak," computed as SUM(peak)/SUM(target). This patch
reduces the average peak datarate as follows:
One pass:
baseline: 1.29715
this patch: 1.23664
Two pass:
baseline: 1.32702
this patch: 1.37824
This change had a positive effect on our quality metrics as well:
One pass CBR:
Min / Mean / Max (pct)
Average PSNR -0.42 / 2.86 / 27.32
Overall PSNR -0.90 / 2.00 / 17.27
SSIM -0.05 / 3.95 / 37.46
Two pass CBR:
Min / Mean / Max (pct)
Average PSNR -4.47 / 4.35 / 35.99
Overall PSNR -3.40 / 4.18 / 36.46
SSIM -4.56 / 6.98 / 53.67
One pass VBR:
Min / Mean / Max (pct)
Average PSNR -5.21 / 0.01 / 3.30
Overall PSNR -8.10 / -0.38 / 1.21
SSIM -7.38 / -0.11 / 3.17
(note: most values here were close to the mean, there were a few
outliers on files that were very sensitive to golden frame size)
Two pass VBR:
Min / Mean / Max (pct)
Average PSNR 0.00 / 0.00 / 0.00
Overall PSNR 0.00 / 0.00 / 0.00
SSIM 0.00 / 0.00 / 0.00
Neither one pass or two pass CBR mode adheres particularly strictly
to the short term buffer constraints, and two pass is less
consistent, even in the baseline commit. This should be addressed
in a later commit. This likely will hurt the quality numbers, as it
will have to reduce the burstiness of golden frames.
Aside: My work on this commit makes it clear that we need to make
rate control modes "pluggable", where you can easily write a new
one or work on one in isolation.
Change-Id: I1ea9a48f2beedd59891f1288aabf7064956b4716
Currently, hex search couldn't guarantee the motion vector(MV)
found is within the limit of maximum MV. Therefore, very large
motion vectors resulted from big motion in the video could cause
encoding artifacts. This change adjusted hex search bounds
checking to make sure the resulted motion vector won't go out
of the range. James Berry, thank you for finding the bug.
Change-Id: If2c55edd9019e72444ad9b4b8688969eef610c55
Declared the bmi in BLOCKD as a union instead of B_MODE_INFO.
Then removed B_MODE_INFO completely.
Change-Id: Ieb7469899e265892c66f7aeac87b7f2bf38e7a67
This is basically a slightly modified version of the previous patch,
and it has a moderately positive effect (SSIM/PSNR both +0.08% avg
on derf-set). Most clips show no change, except waterfall/coastguard,
each ~ +0.8% SSIM/PSNR. You can see similar effects in other clips
by shortening their length to terminate at a very short last group
of frames.
Change-Id: I7a70de99ca1f9fe6a8b6ca7a6e30e8a4b64383e4
this commit makes the usage errorperbit and sadperbit consistent for
encoding modes and passes. Removed all different magic weight factors
associated with errorperbit. Now 1/2 is used for both sadperbit16 and
sadperbit4, the /2 operation is merged into initializations of the 2
variables.
Tests on cif set show .23%, 0.18% and 0.19% gain by avg psnr, overall
psnr and ssim respectively.
Change-Id: Ifa285c3e065ce0a5a77addfc9f95aabf54ee270d
The fb_idx_ref_cnt book-keeping was in error. Added an assert to
prevent future errors in the reference count vector. Also fixed a
pointer syntax error.
Change-Id: I563081090c78702d82199e407df4ecc93da6f349
sad_per_bit has been used for a number of motion vector search routines
with different magic weights: 1, 1/2 and 1/4. This commit remove these
magic numbers and use 1/2 for all motion search routines, also reformat
a number of source code lines to within 80 column limit.
Test on cif set shows overall effect is neutral on all metrics. <=0.01%
Change-Id: I8a382821fa4cffc9c0acf8e8431435a03df74885
vp8_fast_quantize_b_pair_neon function added to quantize
two adjacent blocks at the same time to improve performance.
- Additional 3-6% speedup compared to neon optimized fast
quantizer (Tanya VGA@30fps, 1Mbps stream, cpu-used=-5..-16)
Change-Id: I3fcbf141e5d05e9118c38ca37310458afbabaa4e
Misplaced #endif caused first_time_stamp_ever to only be initialized if
CONFIG_INTERNAL_STATS was set.
Change-Id: I2296a4ab00f7dfb767583edcc5d59b94f48c0621
Added preload instructions to armv6 encoder optimizations.
About 5% average speed-up on Tegra2 for VGA@30fps sequence.
Change-Id: I41d74737720fb71ce7a316f07555357822f3347e
in onyx_if.c update_reference_frames() make
sure that frame buffer indexes are not equal
before preforming a buffer copy. If two frames
share the same buffer the flags will already be
set correctly.
Change-Id: Ida9b5516d08e3435c90f131d2dc19d842cfb536e
Test showed using hex search in realtime mode largely speed up
encoding process, and still achieves similar quality like the
diamond search we have. Therefore, removed the diamond search
option.
Change-Id: I975767d0ec0539f9f6ed7fdfc09506e39761b66c
error_per_bit and sad_per_bit were designed as estimates of a bit worth
of sum squared error and sum absolute difference respectively. Under
this assumption, error_per_bit should be used in combination with 2nd
order errors (variance or sum squared error) while sad_per_bit should
be used in combination with 1st order SADs in motion estimation. There
were a few places where sad_per_bit has been misused with variances,
this commit changes to use error_per_bit for those places, also changes
parameter names to properly indicate which constant is being used.
On cif set, the change has a universal gain by all metrics: 0.13% by
average/overall psnr and 0.1% by ssim.
Change-Id: I4850fdcc3fd6886b30f784bd843f13dd401215fb
