Decoding superframes correctly requires computing the end of the
frame contents in the bitstream precisely. This patch enables
ext-tile to do so.
Also extended superframe_test to test with multiple tiles if using
ext-tile.
Change-Id: I04bb8cde8755a3d764ee3c36aa8b7a6c5c9db742
Tile rows should now be independent, so make pbi->inv_tile_order
invert the decoding order of tile rows as well as tile columns.
This should improve test coverage. Also added more tile configurations
to the tile_independence_tests.
Change-Id: I14b0f2fa9241c1acaf9e2a07071952cb33feca77
This will facilitate bringing the zero node into the token set while
allowing its probability to vary independently.
Change-Id: I57b44c0fce44debb8e612021e44713b229d1b3cf
This commit handles the zero motion vector residuals for single
and compound reference modes, respectively. It improves the coding
performance by 0.13% with no additional encoding complexity.
Change-Id: I16075a836025bd2746da2ff4698fb9261e4b08c1
* changes:
Branch dct to new implementation for bd12
Change dct32x32's range
Fit dct's stage range into 32-bit when bitdepth is 12
Pass tx_type into get_tx_scale
The minimal ans partition size is now one byte. This is checked in
ans_read_init().
The read_is_valid() condition is handled by setup_token_decoder().
Change-Id: I7b202b896630bc4285532208bf7cf84567afe158
The uncompressed frame header contains a bit to signal whether the
frame is encoded using 64x64 or 128x128 superblocks. This can vary
between any 2 frames.
vpxenc gained the --sb-size={64,128,dynamic} option, which allows the
configuration of the superblock size used (default is dynamic). 64/128
will force the encoder to always use the specified superblock size.
Dynamic would enable the encoder to choose the sb size for each
frame, but this is not implemented yet (dynamic does the same as 128
for now).
Constraints on tile sizes depend on the superblock size, the following
is a summary of the current bitstream syntax and semantics:
If both --enable-ext-tile is OFF and --enable-ext-partition is OFF:
The tile coding in this case is the same as VP9. In particular,
tiles have a minimum width of 256 pixels and a maximum width of
4096 pixels. The tile width must be multiples of 64 pixels
(except for the rightmost tile column). There can be a maximum
of 64 tile columns and 4 tile rows.
If --enable-ext-tile is OFF and --enable-ext-partition is ON:
Same constraints as above, except that tile width must be
multiples of 128 pixels (except for the rightmost tile column).
There is no change in the bitstream syntax used for coding the tile
configuration if --enable-ext-tile is OFF.
If --enable-ext-tile is ON and --enable-ext-partition is ON:
This is the new large scale tile coding configuration. The
minimum/maximum tile width and height are 64/4096 pixels. Tile
width and height must be multiples of 64 pixels. The uncompressed
header contains two 6 bit fields that hold the tile width/heigh
in units of 64 pixels. The maximum number of tile rows/columns
is only limited by the maximum frame size of 65536x65536 pixels
that can be coded in the bitstream. This yields a maximum of
1024x1024 tile rows and columns (of 64x64 tiles in a 65536x65536
frame).
If both --enable-ext-tile is ON and --enable-ext-partition is ON:
Same applies as above, except that in the bitstream the 2 fields
containing the tile width/height are in units of the superblock
size, and the superblock size itself is also coded in the bitstream.
If the uncompressed header signals the use of 64x64 superblocks,
then the tile width/height fields are 6 bits wide and are in units
of 64 pixels. If the uncompressed header signals the use of 128x128
superblocks, then the tile width/height fields are 5 bits wide and
are in units of 128 pixels.
The above is a summary of the bitstream. The user interface to vpxenc
(and the equivalent encoder API) behaves a follows:
If --enable-ext-tile is OFF:
No change in the user interface. --tile-columns and --tile-rows
specify the base 2 logarithm of the desired number of tile columns
and tile rows. The actual number of tile rows and tile columns,
and the particular tile width and tile height are computed by the
codec ensuring all of the above constraints are respected.
If --enable-ext-tile is ON, but --enable-ext-partition is OFF:
No change in the user interface. --tile-columns and --tile-rows
specify the WIDTH and HEIGHT of the tiles in unit of 64 pixels.
The valid values are in the range [1, 64] (which corresponds to
[64, 4096] pixels in increments of 64.
If both --enable-ext-tile is ON and --enable-ext-partition is ON:
If --sb-size=64 (default):
The user interface is the same as in the previous point.
--tile-columns and --tile-rows specify tile WIDTH and HEIGHT,
in units of 64 pixels, in the range [1, 64] (which corresponds
to [64, 4096] pixels in increments of 64).
If --sb-size=128 or --sb-size=dynamic:
--tile-columns and --tile-rows specify tile WIDTH and HEIGHT,
in units of 128 pixels in the range [1, 32] (which corresponds
to [128, 4096] pixels in increments of 128).
Change-Id: Idc9beee1ad12ff1634e83671985d14c680f9179a
Use ANS for all entropy coded data in VP10 including the compressed header and
modes and motion vectors. ANS tokens continue to be used for DCT tokens.
Change-Id: Idf709a747150601e4d95d81ecfb3dc7253d349df
Decouples interintra modes and probability models from regular
intra modes, to enable creating/optimizing new interintra modes.
Also, fixes interpolation values for 128x128 interintra and obmc.
Change-Id: I5c2016db49b8f029164e5fe84c6274d4e02ff90e
Rename MI_BLOCK_SIZE.* -> MAX_MIB_SIZE.* (MIB is for MI Block).
Rename MI_MASK.* -> MAX_MIB_MASK.*
There are no functional changes.
This is in preparation for coding the superblock size at the frame
level, which will require some of these constants to become variables.
The new names better reflect future semantics, and hence make the code
clearer.
Change-Id: Iee08d97554cf4cc16a5dc166a3ffd1ab91529992
If --enable-ext-partition is used at build time, the superblock size
(sometimes also referred to as coding unit (CU) size) is extended to
128x128 pixels.
Change-Id: Ie09cec6b7e8d765b7555ff5d80974aab60803f3a
This patch fixes 2 issues in Palette mode:
1. More memory is needed in PALETTE_BUFFER for 444 video format.
2. A merge issue caused by
https://chromium-review.googlesource.com/#/c/333940/7
Change-Id: I2aedc7dfdfb6b66fbd600189ec6e1e2cc6120d40
If configured with --enable-ext-tile, the codec uses an alternative
tile coding syntax in the bitstream. Changes include::
- The maximum number of tile rows and columns is extended to 1024
each.
- The minimum tile width/height is 64 pixels (1 superblock).
- A tile copy mode is added where a tile directly reuse the coded
data of a previous tile
- The meaning of the tile-columns and tile-rows codec parameters are
overloaded to mean tile-width and tile-height in units of 64
pixels.
- All tiles should now be independent, including rows within the
same columns, so large scale parallel, or independent decoding is
possible.
- vpxdec also gained the options to decode only a particular tile,
tile row, or tile column.
Changes without --enable-ext-tile:
- All tiles should now be independent, including rows within the
same columns, so large scale parallel, or independent decoding is
possible.
- vpxenc default tile configuration changed to use 1 tile column.
Change-Id: I0cd08ad550967ac18622dae5e98ad23d581cb33e
This has been ported under ext_partition_types because it is due
to be combined with the coding_unit_size experiment which is
already being ported under ext_partition
Change-Id: I47af869ae123ddf0aa99160dac644059d14266ee
Merge the functions that generate prediction by above/left predictors
for the encoder and the decoder.
Change-Id: I57e53a8f2eb8d3028c4ed0c9abdcbf00503f95a0
This allows sharing more code paths with the rest of the code an allows
for easier compatibility with the other experiments.
Change-Id: Id288b533805a4d0657ec2f17542f2e6ad23ebdb4
This commit re-designs the probability model for the syntax elements
of the dynamic motion vector referencing system.
Change-Id: Icfb8203c7e8f64e10e99f5890e25e6f6b15fe5d1
This patch added two features to improve entropy coding efficiency
for coefficient tokens.
1. Choose 1 of 4 default probability tables based on q-index for
key-frames.
It is ported from nextgen branch:
https://chromium-review.googlesource.com/#/c/280586/
2. Do backward update after each superblock (64X64) row using
subframe token counts.
Coding gain: 0.1% on lowres; 0.42% on midres; 0.36% on hdres.
Much larger gain for key-frames: 2.6%, 2.3%, 1.7%.
Design doc: go/huisu-entropy
Change-Id: Ia3b6a615636be09247d70e4c520405637561532b
Coding gain on screen_content is 12.2% (was 6.6%).
Some features such as frame-level color buffer, adaptive
entropy coding, are coming in future patches.
Change-Id: I2658cf5ec0cbb02cff685475759f3b68c9807697
This commit enables the 1-D transform to use Manhattan grid vertical
and horizontal scan order for transform coefficient entropy coding.
Enabled in inter prediction mode, the hybrid 1D/2D transform coding
scheme outperforms the 2D-DCT based coding system used in VP9 by
lowres_all 1.7%
hdres_all 1.4%
As one coding option, in addition to the existing 17 other transform
types in ext-tx experiment, the 1D/2D hybrid transform improves
the coding gains:
lowres_all 2.2% -> 3.0%
Change-Id: I9cefa9d9e38224546d0afd67feecd9f8d4a16ab0
For left side obmc, the input of the mask function is corrected as
the column coordinate.
Also, minor fixes for a compiler warning.
Change-Id: Ia981ef443d5b0285a93d73e5c7ab83f8c3a23464
Make the RANS implementation operate on cumulative distribution
functions rather than individual probability distribution functions.
CDFs have shown themselves more flexible to work with.
Reduces decoding memory usage from scaling O(num_distributions *
symbol_resolution) to O(num_distributions).
No bitstream change. This is an purely implementation change.
Change-Id: I4e18d3a0a3d37a36a61487c3d778f9d088b0b374
Includes various cosmetic changes and refactoring including
naming the sharp filters differently (since they are no longer
8-tap).
Change-Id: Ida5a19ca0daa9f6a64a6734394c685b2a4a2564a
