This commit added the ability to accumulate the coef stats across
different encodings using an intermediate binary stats files. The
accumulation happens only the binary stats file exists in current
directory. The encoder needs to be built with "ENTROPY_STATS" to
allow the output. The commit also fixed a few formating issues in
output stats file.
Change-Id: Ib1a41180aa554845cf51e4421a230b128a3a82b4
Changes to calculation of sr_coded_error to include 0,0 case.
Experimental use of sr_coded_error in calculating correction factor
for estimating the allowable Q range.
Reinstated some code needed for calculating section_intra_rating.
Add flash detection in calculation of KF boost
Increased tolerance in testing candidate key frames (needed with
longer motion search as this tends to slightly increase inter %.
Zbin changes for 8x8.
Other minor adjustments, refactoring and bug fixes.
Reinstated some motion break out clauses in boost loop
as their removal hurt a few 50fps clips badly in the std set.
It may be possible to remove them again later if a better way
can be found of preventing overly long gf intervals.
Change-Id: Iee686d0c31072828bb1ccd2bc63f5f1c7c548ea2
Allows building the library with the gcc -pedantic option, for improved
portabilty. In particular, this commit removes usage of C99/C++ style
single-line comments and dynamic struct initializers. This is a
continuation of the work done in commit 97b766a46, which removed most
of these warnings for decode only builds.
Change-Id: Id453d9c1d9f44cc0381b10c3869fabb0184d5966
Frame dropping decision is made by evaluating both current frame
and next frame's buffer_level. If both buffer_levels are less
than drop_mark, next frame is dropped. When frame dropping is
over, namely, buffer_level becomes normal again, we need to
reset decimation_count to 0.
Change-Id: Iae182612e61e0da367fbd43afdc90738d975d1a3
The logic for spatial resizing is done after the Q is selected for the
frame. This causes a problem that the Q we select for the (resized)
key frame may be based on a different resolution than the frame we
will encode.
This fix is to ensure that, when resize is on, the selected Q is still
based on the resolution of the frame to be encoded.
Change-Id: Ia49a9eac5f64e48d1c00dfc7ed4ce26fe84d3fa1
Variables m & mi were being dereferenced when they might
hold invalid values.
The fix is simply to move these dereferences to after the
point at which mb_row and mb_col are tested for validity.
Change-Id: Ib16561efa9792dc469759936189ea379d374ad20
Compares the sum of differences between the input block and the averaged
block. If they differ too much the block will not be filtered. Negligible
perfomance hit.
Change-Id: Ib1c31a265efd4d100b3abc4a1ea6675038c8ddde
Add PRIVATE macro for adding private_extern directive for yasm
to hide global symbols. This is only enabled if -DCHROMIUM is used
with YASM.
Also fixed a small problem with rtcd_defs.sh to guard TEMPORAL_DENOISING.
Change-Id: I9027fce3ebddcf20078293e4b86b396f21da7857
This extends the denoiser to work for temporally scalable
coding.
I believe this also fixes a very rare but really bad bug in the original
implementation.
Change-Id: I8b3593a8c54b86eb76f785af1970935f7d56262a
This fix addresses some problems with very complex clips like
handling of flashes on clips like crew (which was made worse
by an earlier patch (derf and std-hd)).
Most clips a small effect but some between 1 & 2%
Derf +0.039, +0.211%
YT +0.042, +0.083%
Change-Id: I65fc7c13afc31482040068544dd65b8808f5cb4a
Compares the sum of differences between the input block and the averaged
block. If they differ too much the block will not be filtered. Negligible
perfomance hit.
Change-Id: Ib1c31a265efd4d100b3abc4a1ea6675038c8ddde
Removed the local scaling factor est_max_qcorrection_factor
and related code to simplify estimateq calculation (little effect
anyway)
Cap range of total correction factor.
Slight change to break out case to turn off arf.
Change-Id: I748187737ba93cfadf016f3dfdf8d2741934067f
the commit fixed a number of compiling issues when some epxeriments
are turned on at the same time.
Change-Id: Idb15b215e2d2a7d25f2707f99ef55a34e7301ce7
This extends the denoiser to work for temporally scalable
coding.
I believe this also fixes a very rare but really bad bug in the original
implementation.
Change-Id: I8b3593a8c54b86eb76f785af1970935f7d56262a
Add PRIVATE macro for adding private_extern directive for yasm
to hide global symbols. This is only enabled if -DCHROMIUM is used
with YASM.
Also fixed a small problem with rtcd_defs.sh to guard TEMPORAL_DENOISING.
Change-Id: I9027fce3ebddcf20078293e4b86b396f21da7857
After a key frame encoding, the frame type could change while
filtering is still going on. Pass the frame type as parameter to the
loopfilter function and don't read it from common storage.
vp8cx_set_alt_lf_level has to be done before packing the stream.
Currently alt_lf_level is not used so there hasn't been any visible
problem here.
Change-Id: Ia114162158cd833c2b16e3b89303cc9c91f19165
* changes:
Add initial keyframe tests
Move all tests to test/ directory
Enable unit tests by default
Build unit tests monolithically
configure: initial support for CXX, CXXFLAGS variables
Resolution changes in calls to vpx_codec_enc_config_set() would cause
a memory leak due to failing to release the lookahead and alt ref
buffers.
Change-Id: I48392ea25e71fe2760d60cfde3fb3874598cc85f
The commit changed how baseline 8x8 coefficient probabilities are
initialized, to be consistent with the initialization of baseline
4x4 coefficient probabilities.
The commit does not have any effect on compression.
Change-Id: Ifb3902b5dc0b0c2e6dc3aa5d4a6589d528e58355
After a key frame encoding, the frame type could change while
filtering is still going on. Pass the frame type as parameter to the
loopfilter function and don't read it from common storage.
vp8cx_set_alt_lf_level has to be done before packing the stream.
Currently alt_lf_level is not used so there hasn't been any visible
problem here.
Change-Id: Ia114162158cd833c2b16e3b89303cc9c91f19165
Rework unit tests to have a single executable rather than many, which
should avoid pollution of the visual studio project namespace, improve
build times, and make it easier to use the gtest test sharding system
when we get these going on the continuous build cluster.
Change-Id: If4c3e5d4b3515522869de6c89455c2a64697cca6
Remove dependency on amount and speed of motion as this
may not behave well across different image sizes.
Tweak impact of % inter.
Add in experimental adjustment based on relative quality of an
older second reference frame.
Cap range of decay values allowed.
Some small + effect on derf but -ve on yt & hd at this stage.
Change-Id: I390d6f6ebe67a2eb0b834980d0d4650124980d3e
In multi-resolution encoding, frame_type decision for each frame
is made by the lowest-resolution encoder. For all other higher-
resolution encoders, kf_mode is always set to VPX_KF_DISABLED,
and they are forced to use the same frame_type picked by the
lowest-resolution encoder.
Change-Id: Ic4d52ec65bbc012ca9c2d236210e28a295591eaf
I now see I didn't write a very long description, so let's do it
here then. We took a pretty big quality hit (0.1-0.2%) from my
recent fix of the inversion of arguments to vp8_cost_bit() in the
RD reference frame costing. I looked into it and basically the
costing prevented us from switching reference frames. This is of
course silly, since each frame codes its own prob_intra_coded, so
using last frame cost indications as a limiting factor can never
be right.
Here, I've rewritten that code to estimate costings based partially
on statistics from progress on current frame encoding. Overall,
this gives us a ~0.2%-0.3% improvement over what we had previously
before my argument-inversion-fix, and thus about ~0.4% over current
git (on derf-set), and a little more (0.5-1.0%) on HD/STD-HD/YT.
Change-Id: I79ebd4ccec4d6edbf0e152d9590d103ba2747775
base the static image test off a measure of 0,0 motion
instead of the decay accumulator value.
Change "transition to still detection" to compare the
decay rate from successive frames.
Minor tweak to the arf extra boost given based on the
number of frames affected.
Removed unused variable mod_err_per_mb_accumulator.
Change-Id: Idd8360083ad409e45f133ce97dd2488259003e64
