The case where frame width increases but the overall memory
size required to hold the mi arrays does not was not
handled.
Change-Id: I72e70b912a7d1766687ad682979f1c9ee124449b
The test to determine if the mode info buffers need
to be resized when the frame size changes was
incorrect, as per bug 837.
By storing the size of the allocated data structure,
a simple test determines whether to allocate more
memory when the frame size changes.
Change-Id: I1544698f2882cf958fc672485614f2f46e9719bd
Specifies the bit-depth, color sampling and colorspace
for intra only frames for profiles > 0
Also adds checks to ensure that profile 1 and 3 are
exclusively used for non 420 streams.
Change-Id: Icfb15fa1acccbce8f757c78fa8a2f60591360745
The issue was introduced by commit g9f37d14 with adding explicit
restrictions on reference-frame scale factors. The restriction
is checked against aligned-by-8 frame dimensions, not against
original ones. So, for example, frame of 35×35 actually can refer
to frame of 70×70, but the new check won't allow this. It will
compare 35 vs 72 (not 70), so 2x downscale limit will be exceeded.
Change-Id: Ic663693034440f64ac8312cbff9e1e773a921060
A previous change, https://gerrit.chromium.org/gerrit/#/c/70632,
introduced a size validation for reference frames to insuare the
input stream is a valid VP9 stream. However, the logic requiring
all reference frames have valid size turned out to be too strict.
In this commit, we modify the validation to require one of the
reference frame has valid dimension. In addition, the decoder
reports error whenever it detects the use of reference frame
with invalid scalig ratio.
Change-Id: If8efc312244087556cfe00f1fcbdff811268ebad
The patch:
https://gerrit.chromium.org/gerrit/#/c/70814/
changed the test that determined whether the context
frame buffers needed to be reallocated or not.
The code checked for a change in total frame area
to signal the need to reallocate context buffers.
However, the above_context buffer needs to be
resized i:xf only the width of the frame has increased.
Change-Id: Ib89d75651af252908144cf662578d84f16cf30e6
For gcc, when libvpx config option debug is disabled, added the
flag -DNDEBUG to disable the assertions in libvpx for some speedup.
Change-Id: Ifcb7b9e8ef5cbe5d07a24407b53b9a2923f596ee
This patch adds back in code that checks that the frame
size lies within defined bounds was inadvertantly removed
by a previous patch:
https://gerrit.chromium.org/gerrit/#/c/70814/
Change-Id: If526570ba559260c4b7e98098bc75f7700ae7f97
Separates HBD profile int two profiles (2 and 3) consistent with the
highbitdepth branch. This patch is ported from the original highbitdepth
branch patch: https://gerrit.chromium.org/gerrit/#/c/70460/
Two of the invalid file tests needed to be updated.
Change-Id: I6a4acd2f7a60b1fb4cbcc8e0dad4eab4248431e3
This patch is the first step toward simplifying the
frame buffer handling.
The final goal is to have a common frame buffer handling
framework for both encoder and decoder that incorporates
the existing ability to use externally allocated memory.
Change-Id: I2c378a4f54a39908915f46c4260e17a080db7ff1
This is a practical concern to allow us to fail in a decoder instance
if the size of a file is bigger than we can reasonably handle.
Change-Id: I0446b5502b1f8a48408107648ff2a8d187dca393
Also fix bugs related with corrupted frame handling.
Return VPX_CODEC_CORRUPT_FRAME when getting corrupted
block.
Change-Id: I7207ccc7c68c4df2b40b561315d16e49ccf7ff41
This patch fixes bug 633:
https://code.google.com/p/webm/issues/detail?id=633
The first decoded frame does not have to be a keyframe,
it could be an inter-frame that is coded intra-only.
This patch fixes the handling of intra-only frames.
A test vector has also been added that encodes 3
intra-only frames at the start of the clip. The
test vector was generated using the code in the
following patch:
https://gerrit.chromium.org/gerrit/#/c/70680/
Change-Id: Ib40b1dbf91aae2bc047e23c626eaef09d1860147
Prepare for frame parallel decoding, the reference count buffers
need to be protected by mutex. Move vp9_thread.* to common
folder so that those buffers could use cross-platform mutex
from vp9_thread.*.
Change-Id: I541277cf15eefed6641555944f67f4a0bcdc8154
pull the latest from WebP, which adds a worker interface abstraction
allowing an application to override init/reset/sync/launch/execute/end
this has the side effect of removing a harmless, but annoying, TSan
warning.
Original source:
http://git.chromium.org/webm/libwebp.git
100644 blob 08ad4e1fecba302bf1247645e84a7d2779956bc3 src/utils/thread.c
100644 blob 7bd451b124ae3b81596abfbcc823e3cb129d3a38 src/utils/thread.h
Local modifications:
- s/WebP/VP9/g
- camelcase functions -> lower with _'s
- associate '*' with the variable, not the type
Change-Id: I875ac5a74ed873cbcb19a3a100b5e0ca6fcd9aed
This patch checks that a decoder never tries to reference frame that's
outside the range of 2x to 1/16th the size of this frame. Any attempt
to do so causes a failure.
Change-Id: I5c98fa7bb95ac4f29146f29dd92b62fe96164e4c
the max is 6. there are assumptions throughout the decode regarding
this; fixes a crash with a fuzzed bitstream
$ zzuf -s 5861 -r 0.01:0.05 -b 6- \
< vp90-2-00-quantizer-00.webm.ivf \
| dd of=invalid-vp90-2-00-quantizer-00.webm.ivf.s5861_r01-05_b6-.ivf \
bs=1 count=81883
Change-Id: I6af41bb34252e88bc156a4c27c80d505d45f5642
See: https://code.google.com/p/chromium/issues/detail?id=362697
The code properly catches an invalid stream but seg faults instead of
returning an error due to a buffer not having been initialized. This
code fixes that.
Change-Id: I695595e742cb08807e1dfb2f00bc097b3eae3a9b
The final goal is eventually to get rid of both itxm_add and fwd_txm4x4.
This patch does it in the decoder.
Change-Id: Ibb3db57efbcbb1ac387c6742538a9fcf2c6f24a5
The current decode_tiles decodes the frame one tile by one tile
and then loopfilter the whole frame or use another worker thread to
do loopfiltering.
|------|------|------|------|
|Tile1-|Tile2-|Tile3-|Tile4-|
|------|------|------|------|
For example, if a tile video has one row and four cols, decode_tiles
will decode the Tile1, then Tile2, then Tile3, then Tile4.
And during decode each tile, decode_tile will decode row by row in
each tile.
For frame parallel decoding, decode_tiles will decode video in row order
across the tiles. So the order will be:
"Decode 1st row of Tile1" -> "Decode 1st row of Tile2"
-> "Decode 1st row of Tile3" -> "Decode 1st row of Tile4"
-> "Decode 2nd row of Tile1" -> "Decode 2nd row of Tile2"
-> "Decode 2nd row of Tile3" -> "Decode 2nd row of Tile4"-> "loopfilter 1st row"
Change-Id: I2211f9adc6d142fbf411d491031203cb8a6dbf6b
Inline loopfilter has been already handled in vp9_decode_frame().
Collecting all similar code in one place now.
Change-Id: I358a0280fc7c2b27cca520bc1e8c16c4eb6491dd
Fixes the idecoder in the case where:
cm->error_resilient_mode == 0, and
cm->frame_parallel_decoding_mode == 0, but
new_fb->corrupted == 1.
The assert in debug_check_frame_counts fails to
take into account the case of a corrupt frame.
Change-Id: Idf318a68458cc88d65d6f3f408a10d8ffe87e43f
We only used two members from that struct: max_threads and inv_tile_order.
Moving them directly to VP9Decoder struct.
Change-Id: If696a4e5b5b41868a55f3cc971e1d7c1dd9d5f69
