Remove an extra level of escaping around the $@ variable to get valid output.
Prior to this change, modifying header files did not trigger a rebuild of
sources dependent on them.
Change-Id: I93ecc60371b705b64dc8a2583a5d31126fe3f851
ndk-build is intended to be launched from the application directory,
not the jni directory. Clarify the path in the comments.
Change-Id: Ie0faa89a13d967088a4fd2fd1c647962a9c04217
First attempt at avoiding all the compile-time environment detection for
cases where you can generate the environments statically, as when the
real build is being performed by another build system.
Change-Id: Ie3cf95d71d6c5169900f31e263b84bc123cdf73f
1. remove the dependency on non existing "vp9_temporal_filter_x86.h"
2. prefix filenames with vp9_ in obj_int_extract.bat to reflect the
change of the actual filenames.
Change-Id: Ib1b4d96ac41788f76917764a6722d8461c857302
This is enabled by default in the main configure.sh, but apparently
is supposed to be disabled if the hardware doesn't support it.
Unaligned reads is only supported on armv6 and newer.
Change-Id: Ie1412e36a14036bbb4fe7b89aa36a178f35b2228
Update the fmt_deps function to use a new sed expression to convert the
object file name generated by the compiler into the path-transformed
name of the .o and .d files.
Prior to this patch, changing a header file would not trigger an
incremental build.
Change-Id: I07f498a1d134577b89a72e3f1143c737b31a0636
this commit changed the asm file compiling in MSVC to use individually
customized build command line with object filename specified for each
input file. This allows object filenames prefixed with path name, and
avoid name collision in link time
Change-Id: I996098643dcadc393af57035a04bef3877f45424
Rather than building an object file directory heirarchy matching the
source tree's layout, rename the object files so that the object
file name contains the path in the source file tree. The intent here
is to allow two files in different parts of the source tree to have
the same name and still not collide when put into an ar archive.
Change-Id: Id627737dc95ffc65b738501215f34a995148c5a2
This change converts push to stmdb and pop to ldmia. In addition word boundaries
are obeyed using \b avoiding substituion where not appropriate.
Patch provided by ihf@chromium.org.
TEST=Used on many Daisy assembly files.
BUG=None.
Change-Id: Ie5b197b158edd0467294551d0b640c8db6530d95
On Ubuntu 12.04, we got the following warning message:
<command-line>:0:0: warning: "_FORTIFY_SOURCE" redefined
[enabled by default]
<built-in>:0:0: note: this is the location of the previous definition
This was already fixed in VP8 configure file. Did the same change in
experimental branch to stop this warning.
Change-Id: Id162e5fd8841585ae806df6560b2f7536ea307c0
The current parsing logic of the dumpmachine tuple lacks any arm
cases which means tgt_isa never gets set, so for all arm targets,
we get detected as generic-gnu. Add some basic arm checks here
so the automatic detection logic works.
Change-Id: Ie5e98142876025c6708604236bc519c0bdb09319
Latest version of all scripts/makefile but rtcd_defs.sh is empty, all
existing functions are still selected using the old/current way.
Change-Id: Ib92946a48a31d6c8d1d7359eca524bc1d3e66174
This allows building on MountainLion as the 10.6 SDK has been
removed from the latest Xcode version (4.4 4F250). Also fix
all warnings for that build.
Change-Id: Ib70bca4a25295f13595f0d10ea9f0229631de5a4
Fixed the quantifier that optionally matches a quote before the
filename. This was originally reported in the homebrew project[1].
Note that this fix is different than patch posted there, as there are
some platforms that don't have the quote, so it needs to be included
in the expression optionally.
[1]: https://github.com/mxcl/homebrew/issues/12567#issuecomment-6434000
Change-Id: Ibf2ed93ce169d80932e877f942dc4eeb03867f8b
The commit introduces a make target 'testdata' that downloads the
required test data from the WebM project website. The data will also
be downloaded if invoking `make test` but is not a strict requirement
for only building the test executable.
The download directory is taken from the LIBVPX_TEST_DATA_PATH
environment variable, or may be specified as part of the make command.
If unset, it defaults to the current directory. It's expected that
most developers will want to set this environment variable to a place
outside their source/build trees, to avoid having to download the data
more than once.
To add test data file:
1) add a line to test/test.mk:
LIBVPX_TEST_DATA-yes += foo-bar-file.y4m
2) add its sha1sum to the test/test-data.sha1 file in the following
format:
528cc88c821e5f5b133c2b40f9c8e3f22eaacc4c foo-bar-file.y4m
3) upload the file to the website
$ gsutil cp foo-bar-file.y4m gs://downloads.webmproject.org/test_data/libvpx
This implementation will check the integrity of the test data
automatically if the `sha1sum` executable is available.
Change-Id: If6910fe304bb3f5cdcc5cb9e5f9afa5be74720d2
Soft enable runtime cpu detect for armv7-android target, so that it
can be disabled and remove dependency on 'cpufeatures' lib.
Change the arm_cpu_caps implementation selection such that 'no rtcd' takes
precedence over system type.
Switch to use -mtune instead of -mcpu. NDK was complaining about
-mcpu=cortex-a8 conflicting with -march=armv7-a, not sure why.
Add a linker flag to fix some cortex-a8 bug, as suggested by NDK Dev
Guide.
Examples:
Configure for armv7+neon:
./configure --target=armv7-android-gcc \
--sdk-path=/path/to/android/ndk \
--disable-runtime-cpu-detect \
--enable-realtime-only \
--disable-unit-tests
...armv7 w/o neon:
./configure --target=armv7-android-gcc \
--sdk-path=/path/to/android/ndk \
--disable-runtime-cpu-detect \
--enable-realtime-only \
--disable-neon \
--cpu=cortex-a9 \
--disable-unit-tests
Change-Id: I37e2c0592745208979deec38f7658378d4bd6cfa
Avoid a pthreads dependency via pthread_once() when compiled with
--disable-multithread.
In addition, this synchronization is disabled for Win32 as well, even
though we can be sure that the required primatives exist, so that the
requirements on the application when built with --disable-multithread
are consistent across platforms.
Users using libvpx built with --disable-multithread in a multithreaded
context should provide their own synchronization. Updated the
documentation to vpx_codec_enc_init_ver() and vpx_codec_dec_init_ver()
to note this requirement. Moved the RTCD initialization call to match
this description, as previously it didn't happen until the first
frame.
Change-Id: Id576f6bce2758362188278d3085051c218a56d4a
The change in assembly offset files to define values as const int broke
Windows build, because the variables are stored in .rdata section instead
of .data section.
This CL changes the integer peeking from .data to .rdata.
Change-Id: I87e465ddcc78d39ec29f3720ea7df0ab807d5512
* changes:
Add initial keyframe tests
Move all tests to test/ directory
Enable unit tests by default
Build unit tests monolithically
configure: initial support for CXX, CXXFLAGS variables
Use CXX rather than assuming g++ to invoke the compiler. Also introduce
separate CXXFLAGS, as certain CFLAGS we enable by default cause warnings
with g++.
Change-Id: Ia2f40ef27c93e45c971d070cc58bdcde9da2ac7c
Allow CHOST to override the gcc -dumpmachine output. This allows to
use the target autodetection code when cross compiling by setting the
CHOST variable.
On Gentoo, we would like to support easy cross-compilation, and for
libvpx this would basically mean copying the code in
build/make/configure.sh to setup the right --target option. It seems a
lot easier to let it guess by itself.
Another option I considered was using CROSS-gcc instead but this would
not work for our multilib setups: They use gcc -m32 to build 32bits
binaries and gcc -m32 -dumpmachine will output the 64bits version,
which would then make libvpx wrongly believe it is building for a
64bits architecture.
Change-Id: I05a19be402228f749e23be7473ca53ae74fd2186
These values can be overridden with some poorly documented and
overloaded options: --libc and --sdk-path
../libvpx/configure --target=armv7-darwin-gcc --sdk-path=/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer --libc=/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS5.1.sdk/
So for someone who still wants to build with the iOS 5 SDK, the last
part of the path should be iPhoneOS5.0.sdk
Change-Id: Ibe93d96ae828c619700dc3222983aa4c30456b88
Failed to build on Linux (as described in Android.mk) with NDK r7b.
Set vpx_rtcd.h dependency after libvpx sources are added to
LOCAL_SRC_FILES so that vpx_rtcd.h is generated before any libvpx file
is touched.
Change-Id: Ibe19d485ca9f679dc084044df0e3fb14587c4d3e
When using 'make dist' after --disable-vp8[encoder|decoder] it would
fail to recognize the option. This would only occur when also specifying
--enable-install-docs and --enable-install-srcs but not
--enable-codec-srcs
Including vpx/ fixes builds with --enable-codec-srcs
vpx_timer.h is also required for vpxenc.c
Change-Id: Ie3e28b2f7ec7ee6d5961d3843f9eab869f79c35b
Newer XCodes have moved the SDK path from /Developer/SDKs
Use a suggestion from jorgenisaksson@gmail.com to locate it
osx_sdk_dir is not required to be set. Apple now offers a set
command line tools which do not require this. isysroot is also
not required in newer versions of XCode so only set it when we
are confident in the location.
There remain issues with the iOS configure steps which will be
addressed later
Change-Id: I4f5d7e35175d0dea84faaa6bfb52a0153c72f84b
Built in echo in 'sh' on OS X does not support -n (exclude trailing
newline). It's not necessary so just leave it off. Fixes issue 390.
Build include guard using 'symbol' so that it is more likely to be
unique.
Change-Id: I4bc6aa1fc5e02228f71c200214b5ee4a16d56b83
This is a proof of concept RTCD implementation to replace the current
system of nested includes, prototypes, INVOKE macros, etc. Currently
only the decoder specific functions are implemented in the new system.
Additional functions will be added in subsequent commits.
Overview:
RTCD "functions" are implemented as either a global function pointer
or a macro (when only one eligible specialization available).
Functions which have RTCD specializations are listed using a simple
DSL identifying the function's base name, its prototype, and the
architecture extensions that specializations are available for.
Advantages over the old system:
- No INVOKE macros. A call to an RTCD function looks like an ordinary
function call.
- No need to pass vtables around.
- If there is only one eligible function to call, the function is
called directly, rather than indirecting through a function pointer.
- Supports the notion of "required" extensions, so in combination with
the above, on x86_64 if the best function available is sse2 or lower
it will be called directly, since all x86_64 platforms implement
sse2.
- Elides all references to functions which will never be called, which
could reduce binary size. For example if sse2 is required and there
are both mmx and sse2 implementations of a certain function, the
code will have no link time references to the mmx code.
- Significantly easier to add a new function, just one file to edit.
Disadvantages:
- Requires global writable data (though this is not a new requirement)
- 1 new generated source file.
Change-Id: Iae6edab65315f79c168485c96872641c5aa09d55
A processor with ARMv7 instructions does not
necessarily have NEON dsp extensions. This CL
has the added side effect of allowing the ability
to enable/disable the dsp extensions cleanly.
Change-Id: Ie1e879b8fe131885bc3d4138a0acc9ffe73a36df
Android.mk file for using the Android NDK build
system to compile. Adds option for SDK path to
use the compiler that comes with android for testing
compiler compliance.
Change-Id: I5fd17cb76e3ed631758d3f392e62ae1a050d0d10
Current android ndk compiler does not recognize
strings for attributes. Numerical equivalents
can be found in the "ARM IHI 0045C" document.
Change-Id: I72de85b8949dc0ae5212af604fff1d5a91a828ea
The conversion script was incorrectly matching
CONFIG_POSTPROC[_VISUALIZER] and generating an
incorrect vpx_config.asm
Match both PROC and ENDP on word boundaries
Change-Id: Ic2788c3b522d4ee0afc5223b72e1b09fb52645be
'all' is the conventional target for building everything in the
makefile, but the child make was expecting all-$(target), for debugging
reasons that I don't recall exactly. Restore the expected behavior.
Change-Id: Ifbb03610b55be679ce7c5e210b7a69a156bb76b9
This adds the magic .note.GNU-stack section at the end of each ARM
asm file (when built with gas), indicating that a non-executable
stack is allowed.
Without this section, the linker will assume the object requires an
executable stack by default, forcing an executable stack for the
entire program.
Change-Id: Ie86de6a449b52d392b9e5e0479833ed8c508ee65
Replace =1 with =true for yasm tool element. This aids in upgrading
e.g., vs9 project files to vs10.
build/x86-msvs/yasm.xml generated during conversion will require the
Separator attribute to be removed for the build to complete
successfully.
Change-Id: If75c4f9a925529740048882003e9d766c5ac4f0c
- Updated -linux-rvct targets to support RVDS 4.0 and later.
- Changed optimization flag to -Otime because -O3 ruined performance
for RVCT linux targets.
- Added support for --enable-small for RVCT
- RVCT created library should be able to link with GCC
- Supports building shared linux libraries
Change-Id: Ic62589950d86c3420fd4d908b8efb870806d1233
