Move the notion of 0 bitrate implying skip deeper into the codec,
rather than doing it at the multi-encoder API level. This preserves
v1.0.0 ABI compatibility, rather than forcing a bump to v2.0.0 over a
minor change. Also, this allows the case where the application can
selectively enable and disable the larger resolution(s) without having
to reinitialize the codec instace (for instance, if no target is
receiving the full resolution stream).
It's not clear how deep to push this check. It may be valuable to
allow the framerate adaptation code to run, for example. Currently put
the check as early as possible for simplicity, should reevaluate this
as this feature gains real use.
Change-Id: I371709b8c6b52185a1c71a166a131ecc244582f0
Original patch by Ginn Chen <ginn.chen@oracle.com> against libvpx
v0.9.0.
I've forward-ported it to the current version (which mostly
involved removing hunks that were no longer relevant), since I've
given up on getting Ginn to submit this upstream himself.
Change-Id: I403c757c831c78d820ebcfe417e717b470a1d022
Besides imposing a performance penalty at startup in most
configurations, these relocations break the dynamic linker for
native Fennec, since it does not support them at all.
Change-Id: Id5dc768609354ebb4379966eb61a7313e6fd18de
These are warnings in most builds, but show up as compile errors on
some platforms when these headers are included from C++ code.
Change-Id: I6c523b4dbbc699075fe73830442b51922e5a61d5
These are warnings in most builds, but show up as compile errors on
some platforms when these headers are included from C++ code.
Change-Id: I6c523b4dbbc699075fe73830442b51922e5a61d5
These values can be overridden with some poorly documented and
overloaded options: --libc and --sdk-path
../libvpx/configure --target=armv7-darwin-gcc --sdk-path=/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer --libc=/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS5.1.sdk/
So for someone who still wants to build with the iOS 5 SDK, the last
part of the path should be iPhoneOS5.0.sdk
Change-Id: Ibe93d96ae828c619700dc3222983aa4c30456b88
The ARNR filter uses MC to find the best match between the
ARF and other nearby frames in the filter-set. Since the
ARF is a member of the filter-set, MC in that case is
unnecesssary. This patch modifies the filter so it does
not apply MC in this case.
Change-Id: Ic0321199c08db2189a57f28d1700b745bc7ff66d
The ARNR filter uses a motion compensated temporal filter,
but the motion estimation implementation accounts for the
cost of the mv in its decision making process. The ARNR
filter uses a dummy cost table initialized to 0 as a way
to ignore the mv costs (which are irrelevant to the filter).
This CL modifies the ARNR filter implementation so that
the mv costing is ignored without the requirement for
dummy tables.
Change-Id: I4196aa5c24da63f858ff54fbaa5fc85ae1f1957f
The backup MODE_INFO buffer used in the error concealment was
allocated in the codec common parts allocation even though this is a
decoder only resource. Moved the allocation to the decoder side.
No need to update_mode_info_border as mode_info buffers are zero
allocated.
This fixes also a potential memory leak as the EC overlaps buffer was not
properly released before reallocation after a frame size change.
Change-Id: I12803d3e012308d95669069980b1c95973fb775f
Rather than using the static default maximum keyframe spacing
provided by vpx_codec_enc_config_default() set the default
value to 5 times the frame rate. Five seconds is too long for
live streaming applications, but is a compromise between seek
efficiency and giving the encoder freedom to choose keyframe
locations.
The five second value is from James Zern's suggestion in
http://article.gmane.org/gmane.comp.multimedia.webm.user/2945
Change-Id: Ib7274dc248589c433c06e68ca07232e97f7ce17f
Race was introduced by https://gerrit.chromium.org/gerrit/15563.
If loopfilter related config params were changed between frames, or
after a KEY frame, there could be a mismatch between encoder's and
decoder's recontructed image. In worst case, when frame buffers are
reallocated because of a size change, the loopfilter could
do an invalid data access (segmentation fault).
Fixes:
Sync with the loopfilter before applying any encoder changes in
vp8_change_config().
Moved the loopfilter synching to the top of
encode_frame_to_data_rate() so that it's done before any alteration of
the encoder.
Change-Id: Ide5245d2a2aeed78752de750c0110bc4b46f5b7b
Increment the last_row_mb_col counter by nsync after last MB of row is
ready. This way we dont need to check for last MB of row when
synching.
Set last MB of row ready just after row extension is done, This avoids
o potential race condition whit the processing of last MB of next row.
Change-Id: I19c44fd6041116ee5483be2143b4f4bfcd149eac
RD costs were local to MACROBLOCK data and had to be copied all the
time to each thread's MACROBLOCK data. Tables moved to a common place
and only pointers are setup for each encoding thread.
vp8_cost_tokens() generates 'int' costs so changed all types to be
int (i.e. removed unsigned).
NOTE: Could do some more cleaning in vp8cx_init_mbrthread_data().
Change-Id: Ifa4de4c6286dffaca7ed3082041fe5af1345ddc0
The block pointers and offset do not need to be calculated for every
frame. Block internal predictors can be update once when decoder is
allocated. Destination and previous buffer offsets have to be updated
just when frame size is changing.
Change-Id: I92ca8df0e6aaac4cc35ab890751d446760bf82e2
Key frame macrobock and block mode probabilities are constant.
Remove the allocation of tables for each codec instance and use
instead the default const prob tables.
Change-Id: I8361798ac491f9b3889e86925a494c58647c753f
Move the notion of 0 bitrate implying skip deeper into the codec,
rather than doing it at the multi-encoder API level. This preserves
v1.0.0 ABI compatibility, rather than forcing a bump to v2.0.0 over a
minor change. Also, this allows the case where the application can
selectively enable and disable the larger resolution(s) without having
to reinitialize the codec instace (for instance, if no target is
receiving the full resolution stream).
It's not clear how deep to push this check. It may be valuable to
allow the framerate adaptation code to run, for example. Currently put
the check as early as possible for simplicity, should reevaluate this
as this feature gains real use.
Change-Id: I371709b8c6b52185a1c71a166a131ecc244582f0
Look for changes in the codec's configured w/h instead of its active
w/h when forcing keyframes. Otherwise calls to vp8_change_config()
will force a keyframe when spatial resampling is active.
Change-Id: Ie0d20e70507004e714ad40b640aa5b434251eb32
(see Change I9b2ccc88: Makes all mode token tables const)
Further remove runtime table initialization and use
precalculated const data. Data footprint reduced
by 4112 bytes.
Change-Id: Ia3ae9fc19f77316b045cabff01f6e5f0876a86ab
Ensure that RTCD function pointers are set at most once, to silence
some data race warnings. Implementation provided for POSIX threads and
Win32, with the prior unsynchronized behavior left in place for other
platforms.
Change-Id: I65c5856df43ef67043b3d5f26ddafddd8fcb2f7e
We can get rid of all remaining global initializers now:
vp8_scale_machine_specific_config()
vp8_initialize()
vp8dx_initialize()
Change-Id: I2825cea5d1c01ad9f6c45df49a0f86d803bfeb69
Mode token tabels precalculated in entropymode.c.
Removes vp8_initialize_common()as all common global data
is precalculated const now.
Change-Id: I9b2ccc883e4f618069e1bc180dad3a823394eb73
Removes all runtime initialization of global data in tokenize.c.
DCT token and cost tabels are pre-generated.
Second patch in a series to make sure code is reentrant.
Change-Id: Iab48b5fe290129823947b669413101f22a1bcac0
Removes all runtime initialization of global data in entropy.c.
Precalculated values are used for initializing all entropy related
tabels.
First patch in a series to make sure code is reentrant.
Change-Id: I9aac91a2a26f96d73c6470d772a343df63bfe633
When producing an invisible ARF, the time stamp counters aren't
updated since the last time stamp is seen by the codec twice. The
prior code was trapping this case with refresh_alt_ref, but this isn't
correct for other uses of the ARF. Instead, use the show_frame flag.
Change-Id: If67fff7c6c66a3606698e34e2fb5731f56b4a223
