This commit unifies the encoder and decoder border extension and
motion compensated prediction process. Remove the decoder specific
flow to simplify the development flow.
Change-Id: I9c43bbe6d7c017e6da2db6a62c5bf3d0af7ccfce
This commit converts the scalar motion vector probability model
into vector format for later precise estimate.
Change-Id: I7008d047ecc1b9577aa8442b4db2df312be869dc
In this experiment, an obmc inter prediction mode is enabled for
>= 8X8 inter blocks. When the obmc flag is on, the regular block-
based motion compensation will be refined by using predictors of
the above and left blocks.
Fixed some compatibility issues with vp9_highbitdepth, supertx,
ref_mv, and ext_interp.
Coding gain (%) on derflr/hevcmr/hevchd
OBMC:
1.047/1.022/0.708
OBMC + SUPERTX:
1.652/1.616/1.137
SUPERTX:
0.862/0.779/0.630
Change-Id: I5d8d3c4729c6d3ccb03ec7034563107893103b7f
Adds a wiener filter based restoration scheme in loop which can
be optionally selected instead of the bilateral filter.
The LMMSE filter generated per frame is a separable symmetric 7
tap filter. Three parameters for each of horizontal and vertical
filters are transmitted in the bitstream. The fourth parameter
is obtained assuming the sum is normalized to 1.
Also integerizes the bilateral filters, along with other
refactoring necessary in order to support the new switchable
restoration type framework.
derflr: -0.75% BDRATE
[A lot of videos still prefer bilateral, however since many frames
now use the simpler separable filter, the decoding speed is
much better].
Further experiments to follow, related to replacing the bilateral.
Change-Id: I6b1879983d50aab7ec5647340b6aef6b22299636
This commit enables entropy coding for dynamic reference motion
vector modes. The probability model is contexted on the ranking
categories of the reference motion vector candidates.
Change-Id: I09b58d98a409d63ec1a407331e29f8945b7ef17d
Temporaly disable warning for unused function for vp10, needs clean
out the warnings before re-enable the flag for vp10.
Change-Id: I5636f8cd607423f6ea6963db9c2cbd688e30b495
BD-rate performance improvement (on top of ext-intra):
derflr 0.22%
hevclr 0.36%
hevcmr 0.48%
hevchr 0.37%
stdhd 0.19%
Average speed impact on some derf clips is about 40% slower (on
top of ext-intra). Speed improvment is a to-do.
Change-Id: I8fe3fe8c5e4f60d0462778adbcc15c84dfbe7a25
The loop filter relies on inter_tx_size in MB_MODE_INFO being set
properly when VAR_TX is enabled. Supertx coded blocks did not set this
previously at all, and the differing garbage values eventually resulted
in in a YUV mismatch between encoder and decoder after loop filtering.
This patch fixes this by setting inter_tx_size to the proper supertx
size in both the encoder and the decoder. This should also mean that
loop filtering is done at the proper transform boundaries, even when
supertx or vartx is being used.
Change-Id: I41a564cd6d34ce4a8313ad4efa89d905f5ead731
Fixes some of the issues introduced by a merge from master.
derflr: -0.893% BDRATE
hevcmr: -1.667% BDRATE
Change-Id: I4c5b40ec63a6f19521191d3c730af87db3c4bc00
Combinations of different mv modes for two reference frames
are allowed in compound inter modes. 9 options are enabled,
including NEAREST_NEARESTMV, NEAREST_NEARMV, NEAR_NEARESTMV,
NEAREST_NEWMV, NEW_NEARESTMV, NEAR_NEWMV, NEW_NEARMV, ZERO_ZEROMV,
and NEW_NEWMV.
This experiment is mostly deported from the nextgen branch.
It is made compatible with other experiments
Coding gain of EXT_INTER(derflr/hevcmr/hevchd): 0.533%/0.728%/0.639%
Change-Id: Id47e97284e6481b186870afbad33204b7a33dbb0
Current implementation is a bilateral filter whose
parameters are transmitted in the bitstream.
derflr: -0.647% BDRATE
hevcmr: -0.794% BDRATE
This is a prelimary patch. Various other variations are to
be investigated next, that will hopefully be less expensive
on the decoder side.
Change-Id: I50634ae8f5014ad0bf7432306348908a349d81e1
NEW2MV is enabled, representing a new motion vector predicted from
NEARMV. It is mostly ported from nextgen, where it was named
NEW_INTER.
A few fixes are done for sub8x8 RDO to correct some misused
mv references in the original patch.
A 'bug-fix' for encoding complexity is done, reducing the additional
encoding time from 50% to 20%. In sub8x8 case, the old patch
did motion search for every interpolation filter (vp9 only
searches once). This fix also slightly improves the coding gain.
This experiment has been made compatible with REF_MV and EXT_REFS.
Coding gain (derflr/hevcmr/hevchd): 0.267%/0.542%/0.257%
Change-Id: I9a94c5f292e7454492a877f65072e8aedba087d4
Fixes a breakage introduced with the latest merge from master and
cleans up a couple of compiler warnings.
Change-Id: Ia55b39ba78e43f6fe52c54d7f34faa4dd6bbbf26
The nominal tx_type for a given mode is used as a context
to encode the actual tx_type for intra.
Results:
derflr: -0.241% BDRATE
hevcmr: -0.366% BDRATE
Change-Id: Icfe7b0a58d79bc6497a06e3441779afec6e01e21
Various additional changes were made to make the experiment
compatible with misc_fixes.
derflr: +0.979%
hevcmr: +0.865%
Speed-wise with --enable-supertx the encoder is only about 10%
slower than without. Decoding impact is about 30% slowdown.
Note this does not work with ext-tx or var-tx yet. That is
a TODO.
Change-Id: If25af4241a7a9efbd28f58eda3c4f044c7a7ef4b
Otherwise, per-segment lossless might mean that some segments are not
lossless and they could still want to use another mode. The per-block
tx points remain uncoded on blocks where (per the segment id) the Q
value implies lossless.
Change-Id: If210206ab1fe3dd11976797370c77f961f13dfa0
For the experiment of EXT_REFS, removed the previous special handling
on the new last 3 references, i.e. LAST2_FRAME, LAST3_FRAME, and
LAST4_FRAME, at the decoder, so that these new last references are
treated the same way as the other 3 references (LAST_FRAME,
GOLDEN_FRAME, and ALTREF_FRAME). Encoder changes have been made
accordingly to realize this flexibility.
Change-Id: Ic6546f9443b4377bb7e7b101bfa3e70a8b8d1c65
The culprit is on the decode side xd->lossless[i] setup was in wrong
location where segment features are not yet decoded.
Also on the encoder side, transform mode was not set consistently
between when tx_mode is selected and how tx_mode is enforced in
tx size selection.
Change-Id: I4c4c32188fda7530cadab9b46d4201f33f7ceca3
This commit re-works the entropy coding scheme of the motion
compensated prediction modes. It allows more flexible hyperplane
partition for precise classification.
Change-Id: Iba5035c76691946cf1386b6c495e399c3d9c8fc5
