For real-time mode. Move the switch to fixed partition
for is_src_frame_alt_ref so all speeds may use it
if use_altref_onepass is set.
Improves metrics by ~2% for ytlive set at speed 4
(where use_altref_onepass is currently used).
Change-Id: I033240386598c9dbd0364da89ccbcca64bc663ee
Only has effect when sf->use_altref_onepass is enabled,
as in that case scene detection is skipped for non-show frame
and so high_source_sad does not get reset to 0.
No change in metrics or speed.
Change-Id: I421f066d239341449c18826089e1810b9fc5967f
Add stats for past ARF usage, and use it to disable
ARF usage based on some conditions.
Overall improvement on ytlive set, reduces the regression
on the problem clips for this feature.
Only affects when sf->use_altref_onepass is enabled
(currently off by default).
Change-Id: I66267f227ea132dc86acb730e9882f85bead2cdb
This reverts commit 535b7b915a.
This is actually used in CBR to reset the rate control if high source sad is detected.
Original change's description:
> Remove the speed condition on scene detection in 1 pass code.
>
> Scene detection is used for VBR mode and for screen_content mode.
>
> It was also enabled for CBR mode via the speed condition,
> but currently the analysis in the scene detection is not used
> in CRB mode (similar computations are done locally at superblock level
> when the source_sad feature is enabled).
>
> For 1 pass code.
> No change in behavior. Small speed gain, ~0.5%.
>
> Change-Id: I59991d7ef2af320bea7af4b907596e057affa42f
TBR=marpan@google.com,builds@webmproject.org,jianj@google.com
Change-Id: Ib4e6b02047f75632503e7b0fc870af97fa9291c3
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Scene detection is used for VBR mode and for screen_content mode.
It was also enabled for CBR mode via the speed condition,
but currently the analysis in the scene detection is not used
in CRB mode (similar computations are done locally at superblock level
when the source_sad feature is enabled).
For 1 pass code.
No change in behavior. Small speed gain, ~0.5%.
Change-Id: I59991d7ef2af320bea7af4b907596e057affa42f
* changes:
Remove the unnecessary cast of (int16_t)cospi_{1...31}_64
Remove the unnecessary upcasts of (int)cospi_{1...31}_64
Change cospi_{1...31}_64 from tran_high_t to tran_coef_t
Add the condition frames_since_golden > 0 to the
early exit check for ARF usage in nonrd_pickmode.
This improves quality of first frame following ARF, where
frame_since_golden = 0.
Small/neutral gain in metrics for speed 6, neutral change in speed.
Only affects when USE_ALTREF_FOR_ONE_PASS is enabled.
Change-Id: I82e73e6ff6fc849e5ca5448563cb8a0515fe0cdc
A new bug was introduced in a80bdfd "Change sinpi_{1,2,3,4}_9 from
tran_high_t to int16_t". Reverted the change in this file.
BUG=webm:1450
Failed test C/TransHT.AccuracyCheck/26.
Change-Id: Id001f57aad811803ef7d367d2b2bc008d8499991
Modify simple_block_yrd condition in nonrd_pickmode for SVC:
allow it to be used also on base temporal_layer, only when
spatial_layer > 1 and block size < 32x32.
Speed up of about ~2% for 3 layer SVC, with little/negligible
loss in quality.
Change-Id: I7734bdae51cf51f22b96f6b2b27da20ea1d84344
Fix the setting to frames_till_gf_update_due, and
adjust the limit value.
Only affects when USE_ALTREF_FOR_ONE_PASS is enabled.
Neutral change to metrics and speed for ytlive.
Change-Id: I266d9a00b36221bc8602fa2746d4e8a8f7d4dfae
Only when USE_ALT_REF_ONE_PASS is enabled (off by default).
Force fixed partition to 64x64 when is_src_alt_ref_frame is true,
and don't force early exit for some modes in nonrd_pickmode
for ARF noshow frames.
Small gain ~0.2% on ytlive metrics for speed 6.
Neutral speed difference.
Change-Id: I27eb6622d0453c09a06ccdc3b16368762474d11d
In the new AUTO mode, restrict the minimum alt-ref interval and max column
tiles adaptively based on picture size, while not applying any rate control
constraints.
This mode aims to produce encodings that fit into levels corresponding to
the source picture size, with minimum compression quality lost. However, the
bitstream is not guaranteed to be level compatible, e.g., the average bitrate
may exceed level limit.
BUG=b/64451920
Change-Id: I02080b169cbbef4ab2e08c0df4697ce894aad83c
Also add column headings so that the output can still be parsed if the
set of headers changes later.
Change-Id: I4beaf266521e093db4acf5f715b18fdfb7e3d1cd
Scale 3x3 block instead of 16x16 block in each loop.
Benefits:
1. Reduced number of different phase_scaler from 16 to 3. Optimization code
will be smaller and faster.
2. The maximum phase_scaler drifting will be reduced from 5/16 to 1/24.
(The drifting is 1/(3*16) in each step.)
BUG=webm:1419
Change-Id: Ibb9242a629ddb03e1ff93b859bece738255e698c
The intra mode rd penalty was implemented as a rate penalty.
Code was added to scale the penalty according to block size but
this was not done correctly for the SB level or sub 8x8.
The code did a weird double scaling in regard to bit depth that
has been removed. Given that it is a rate penalty the bit depth
should not matter.
This bug fix improves average metrics on our standard test
sets by about 0.1%
Change-Id: I7cf81b66aad0cda389fe234f47beba01c7493b1e
Move class VpxScaleBase to new file test/vpx_scale_test.h.
Add new file test/vp9_scale_test.cc with ScaleFrameTest.
BUG=webm:1419
Change-Id: Iec2098eafcef99b94047de525e5da47bcab519c1
Neutral on rtc set for speed 8. Neutral on ytlive for speed 5.
Saves some computation cycles but no speed gain observed on Pixel.
Change-Id: I34c4642cd543aa89c5b9c4bff6b7113577c64c91
Rev d147771 fixed the test failure. So remove the resolution condition
for using source_sad in speed 6.
BUG=webm:1452
Change-Id: I1efba97e1ef5bd4de5f886299f6fcb907187abcd
Enable adapt_partition for vbr mode for speed 6.
This allows the usage of the pickmode-based partition
(used in speed 5), but only selectively for superblocks
with high source sad, otherwise the faster variance based
partition scheme is used.
For speed 6 on ytlive set: avgPSNR/SSIM metrics up by ~0.6%,
several clips up by ~1.5%. Small/negligible decrease in speed.
Change-Id: I12f3efef6b3e059391de330fdbe5a44c2587f1f8
For SVC at speed >= 7: only use the improved mv search
on base spatial layer, if top layer resolution is above 640x360.
~2.3% speedup
Small/negligible loss in avgPSNR metrics on rtc set.
Change-Id: Iaef75a57ebf1c248931bc1aa28d20b7fecac1851
For speeds < 7, increase threshold that controls the split
of 16x16->8x8 blocks, for resolutions 720p and higher.
Minor change for speed 5 (since it uses reference partition scheme
which only uses variance partition as first step).
For speed 6: ~0.5% increase in avgPSNR/SSIM metrics on ytlvie set.
No change in speed.
Change-Id: I5126580973201538d8ca26a9256b93c4d11d685b
About 4x faster when values are below the dequant threshold and 10x
faster if everything needs to be calculated.
Both numbers would improve if the division for dqcoeff could be
simplified.
BUG=webm:1426
Change-Id: I8da67c1f3fcb4abed8751990c1afe00bc841f4b2
This feature is used for the CBR RTC encoding mode
at speed >= 6. This change will exclude it for VBR mode.
For speed 6 live encoding (VBR):
avgPSNR/SSIM metrics on ytlive set up by ~1% (few clips up by 2/3%).
No change in speed.
Change-Id: I1a0dd94c334f7df309ab5a48d477d7e25355b798
This should probably be handled before vp9_regular_quantize_b_4x4 even
gets called.
Fixes an assert resulting from removing skip_block from the quantize
functions.
BUG=webm:1459
Change-Id: I7f52b53f959b4654b3d4517ebda31a678f4d0fde
