vp8_fast_quantize_b_pair_neon function added to quantize
two adjacent blocks at the same time to improve performance.
- Additional 3-6% speedup compared to neon optimized fast
quantizer (Tanya VGA@30fps, 1Mbps stream, cpu-used=-5..-16)
Change-Id: I3fcbf141e5d05e9118c38ca37310458afbabaa4e
in encodframe.c, quant_shift is set to 0 or 1 in vp8cx_invert_quant
only use 8 bits to store this, instead of 16. will allow saving an
xmm register in an updated version of the regular quantize
Change-Id: Ie88c47fe2aff5af0283dab1147fb2791e4b12f90
Use the fast quantizer for inter mode selection and the
regular quantizer for the rest of the encode for good quality,
speed 1. Both performance and quality were improved. The
quality gains will make up for the quality loss mentioned in
I9dc089007ca08129fb6c11fe7692777ebb8647b0.
Change-Id: Ia90bc9cf326a7c65d60d31fa32f6465ab6984d21
The fast quantizer assembly code has not been updated to match the new
exact quantizer, which was made the default in commit 6adbe09.
Specifically, they are not aware of the potential for the coefficient
to be scaled, which results in the quantized result exceeding the range
of the DCT. This patch restores the previous behavior of using the
non-shifted coefficients when in the fast quantizer code path, but
unfortunately requires rebuilding the tables when switching between the
two.
Change-Id: I0a33f5b3850335011a06906f49fafed54dda9546
Small changes to the default zero bin and rounding tables.
Though the tables are currently the same for the Y1 and Y2 cases
I have left them as separate tables in case we want to tune this later.
There is now some adjustment of the zbin based on the prediction mode.
Previously this was restricted to an adjustment for gf/arf 0,0 MV.
The exact quantizer now marginal outperforms and is the default.
The overall average gain is about 0.5%
Change-Id: I5e4353f3d5326dde4e86823684b236a1e9ea7f47
Most of the code that actually uses these matrices indexes them as
if they were a single contiguous array, and coverity produces
reports about the resulting accesses that overflow the static
bounds of the first row.
This is perfectly legal in C, but converting them to actual [16]
arrays should eliminate the report, and removes a good deal of
extraneous indexing and address operators from the code.
Change-Id: Ibda479e2232b3e51f9edf3b355b8640520fdbf23
This patch moves the scattered updates to the mb skip state
(mode_info_context->mbmi.mb_skip_coeff) to vp8_tokenize_mb. Recent
changes to the quantizer exposed a bug where if a macroblock
could be coded as a skip but isn't, the encoder would run the
loopfilter but the decoder wouldn't, causing a reference buffer
mismatch.
The loopfilter is controlled by a flag called dc_diff. The decoder
looks at the number of decoded coefficients when setting this flag.
The encoder sets this flag based on the skip state, since any
skippable macroblock should be transmitted as a skip. The coefficient
optimization pass (vp8_optimize_b()) could change the coefficients
such that a block that was not a skip becomes one. The encoder was
not updating the skip state in this situation for intra coded blocks.
The underlying issue predates it, but this bug was recently triggered
by enabling trellis quantization on the Y2 block in commit dcd29e3,
and by changing the quantizer range control in commit 305be4e.
Change-Id: I5cce5da0dbc2d22f7d79ee48149f01e868a64802
There is currently no inexact version of this function, so do not
even compile it without EXACT_QUANT.
This will prevent someone from inadvertently trying to use it without
the proper EXACT_QUANT setup.
Change-Id: Ia13491e0128afb281c05c9222ee5987101e4010d
As the zbin and rounding constants are normalized, rounding effectively
does the zbinning, therefore the zbin operation can be removed. In
addition, the memset on the two arrays are no longer necessary.
Change-Id: If39c353c42d7e052296cb65322e5218810b5cc4c
Changes 'The VP8 project' to 'The WebM project', for consistency
with other webmproject.org repositories.
Fixes issue #97.
Change-Id: I37c13ed5fbdb9d334ceef71c6350e9febed9bbba
These copies occurred for each macroblock in the encoder and decoder.
Thetemp MB_MODE_INFO mbmi was removed from MACROBLOCKD. As a result,
a large number compile errors had to be fixed.
Change-Id: I4cf0ffae3ce244f6db04a4c217d52dd256382cf3
Replace the exponential search for optimal rounding during
quantization with a linear Viterbi trellis and enable it
by default when using --best.
Right now this operates on top of the output of the adaptive
zero-bin quantizer in vp8_regular_quantize_b() and gives a small
gain.
It can be tested as a replacement for that quantizer by
enabling the call to vp8_strict_quantize_b(), which uses
normal rounding and no zero bin offset.
Ultimately, the quantizer will have to become a function of lambda
in order to take advantage of activity masking, since there is
limited ability to change the quantization factor itself.
However, currently vp8_strict_quantize_b() plus the trellis
quantizer (which is lambda-dependent) loses to
vp8_regular_quantize_b() alone (which is not) on my test clip.
Patch Set 3:
Fix an issue related to the cost evaluation of successor
states when a coefficient is reduced to zero. With this
issue fixed, now the trellis search almost exactly matches
the exponential search.
Patch Set 2:
Overall, the goal of this patch set is to make "trellis"
search to produce encodings that match the exponential
search version. There are three main differences between
Patch Set 2 and 1:
a. Patch set 1 did not properly account for the scale of
2nd order error, so patch set 2 disable it all together
for 2nd blocks.
b. Patch set 1 was not consistent on when to enable the
the quantization optimization. Patch set 2 restore the
condition to be consistent.
c. Patch set 1 checks quantized level L-1, and L for any
input coefficient was quantized to L. Patch set 2 limits
the candidate coefficient to those that were rounded up
to L. It is worth noting here that a strategy to check
L and L+1 for coefficients that were truncated down to L
might work.
(a and b get trellis quant to basically match the exponential
search on all mid/low rate encodings on cif set, without
a, b, trellis quant can hurt the psnr by 0.2 to .3db at
200kbps for some cif clips)
(c gets trellis quant to match the exponential search
to match at Q0 encoding, without c, trellis quant can be
1.5 to 2db lower for encodings with fixed Q at 0 on most
derf cif clips)
Change-Id: Ib1a043b665d75fbf00cb0257b7c18e90eebab95e
To facilitate more testing related to quantizer and rate
control, the old version quantizer is added back. old and
new quantizer can be switched back and forth by define or
un-define the macro "EXACT_QUANT".
Change-Id: Ia77e687622421550f10e9d65a9884128a79a65ff
This replaces the approximate division-by-multiplication in the
quantizer with an exact one that costs just one add and one
shift extra.
The asm versions have not been updated in this patch, and thus
have been disabled, since the new method requires different
multipliers which are not compatible with the old method.
Change-Id: I53ac887af0f969d906e464c88b1f4be69c6b1206
When the license headers were updated, they accidentally contained
trailing whitespace, so unfortunately we have to touch all the files
again.
Change-Id: I236c05fade06589e417179c0444cb39b09e4200d
