This change added a motion search skipping mechanism similar
to what we did in second pass. For a macroblock that is very
similar to the macroblock at same location on last frame,
we can set its mv to be zero, and skip motion search. This
improves first-pass performance for slide shows and video
conferencing clips with a slight PSNR loss.
Change-Id: Ic73f9ef5604270ddd6d433170091d20361dfe229
This issue likely doesn't appear in the unmodified encoder, but
sufficient hacking on the mode selection loop can expose it.
Change-Id: I8a35831e8f08b549806d0c2c6900d42af883f78f
Break MFQE code into it's own file.
It is currently only valid for 16x16 and 8x8 Y blocks. It also filters
4x4 U/V blocks.
Refactor filtering and add associated assembly. Limited test cases show
--mfqe introduces a penalty of ~20% with HD content. The assembly
reduces the penalty to ~15%
Change-Id: I4b8de6b5cdff5413037de5b6c42f437033ee55bf
Coefficient costing failed to take account of the first branch
being skipped ( 0 vs eob) if the previous token is 0.
Fixed rd to account for slightly increased token cost & cleaned up
warning message
Change-Id: I56140635d9f48a28dded5a816964e973a53975ef
Produce the token partitions on-the-fly, while processing each MB.
Context is updated at the beginning of each frame based on the
previoud frame's counters. Optimally encoder outputs partitions in
separate buffers. For frame based output, partitions are concatenated
internally.
Limitations:
- enabled just in combination with realtime-only mode
- number of encoding threads has to be equal or less than the
number of token partitions. For this reason, by default the encoder
will do 8 token partitions.
- vpxenc supports partition output (-P) just in combination with
IVF output format (--ivf)
Performance:
- Realtime encoder can be up to 13% faster (ARM) depending on the number
of threads and bitrate settings. Constant gain over the 5-16 speed
range.
- Token buffer reduced from one frame to 8 MBs
Quality:
- quality is affected by the delayed context updates. This again
dependents on input material, speed and bitrate settings. For VC
style input the loss seen is up to 0.2dB. If error-resilient=2
mode is used than the effect of this change is negligible.
Example:
./configure --enable-realtime-only --enable-onthefly-bitpacking
./vpxenc --rt --end-usage=1 --fps=30000/1000 -w 640 -h 480
--target-bitrate=1000 --token-parts=3 --static-thresh=2000
--ivf -P -t 4 -o strm.ivf tanya_640x480.yuv
Change-Id: I127295cb85b835fc287e1c0201a67e378d025d76
Eliminated some mb branches along with other code cleanups.
This is part of an ongoing effort to remove cut/paste
code in the decoder.
Change-Id: Ifabb0f67cafa6922b5a0e89a0d03a9b34e9e5752
Reworked the code to use vp8_build_intra_predictors_mby_s,
vp8_intra_prediction_down_copy, and vp8_intra4x4_predict_d_c
functions instead. vp8_intra4x4_predict_d_c is a decoder-only
version of vp8_intra4x4_predict. Future commits will fix this
code duplication.
Change-Id: Ifb4507103b7c83f8b94a872345191c49240154f5
When we encode slide-show clips, for the majority of the time,
only ZEROMV mode is checked, and all other modes are skipped.
This change delayed uv intra-mode evaluation until intra mode is
actually checked. This gave big performance gain for slide-show
video encoding (2nd pass gain: 18% to 28%). But, this change
doesn't help other types of videos.
Also, zbin_mode_boost is adjusted in mode-checking loop, which
causes bitstream mismatch before/after this change when --best
or --good with --cpu-used=0 are used.
Change-Id: I582b3e69fd384039994360e870e6e059c36a64cc
use oxcf instead of common in check to Reinit the
lookahead buffer if the frame size changes
prior behavior would cause assertion fail/crash
first observed in:
support changing resolution with vpx_codec_enc_config_set
Change-Id: Ib669916ca9b4f206d4cc3caab5107e49d39a36aa
When temporal layers is used (i.e., number_of_layers > 1),
we don't use the frame rate boost for setting the key
frame target size. The factor was forcing the target size to be
always at its minimum (2* per_frame_bandwidth) for low frame rates
(i.e., base layer frame rate).
Generally we should modify or remove this frame rate factor;
for now we turn if off for number_of_layers > 1.
Change-Id: Ia5acf406c9b2f634d30ac2473adc7b9bf2e7e6c6
Reworked the code to use vp8_build_intra_predictors_mbuv_s
instead. This is WIP with the goal of eliminating all
functions in reconintra_mt.h
Change-Id: I61c4a132684544b24a38c4a90044597c6ec0dd52
In vp8_rd_pick_inter_mode(), if total of eobs is zero, rate needs
to be adjusted since there are no non-zero coefficients for
transmission. The uv intra eobs calculated in
rd_pick_intra_mbuv_mode() need to be saved before they are
overwritten by inter-mode eobs.
Change-Id: I41dd04fba912e8122ef95793d4d98a251bc60e58
mode_info_context->mbmi.mb_skip_coeff has to always reflect the
existence or not of coeffs for a certain MB. The loopfilter needs this
info.
mb_skip_coeff is either set by the vp8_tokenize_mb or has to be set to
1 when the MB is skipped by mode selection. This has to be done
regardless of the mb_no_coeff_skip value.
prob_skip_false is needed just when mb_no_coeff_skip is 1. No need to
keep count of both skip_false and skip_true as they are complementary
(skip_true+skip_false = total_mbs)
Change-Id: I3c74c9a0ee37bec10de7bb796e408f3e77006813
Depending on implementation the optimized SAD functions may return early
when the calculated SAD exceeds max_sad.
Change-Id: I05ce5b2d34e6d45fb3ec2a450aa99c4f3343bf3a
Refactoring some of the mode decoding logic introduced a bug where
the segmentation maps would not be properly reset on keyframes.
http://code.google.com/p/webm/issues/detail?id=378
The text of the bug is somewhat misleading as I initially read it to
imply the bug was present in v0.9.7-p1 (Cayuga), but note the text
"master", which indicates this was something subsequent. This issue
bisects back to v0.9.7-p1-84-ga99c20c, so unfortunately it was broken
during the Duclair release.
Thanks to Alexei Leonenko for investigating the root cause.
Change-Id: I9713c9f070eb37b31b3b029d9ef96be9b6ea2def
