Refactor the 8x8 inverse hybrid transform. It is now consistent
with the new inverse DCT. Overall performance loss (due to the
use of this variant ADST, and the rounding errors in the butterfly
implementation) for std-hd is -0.02.
Fixed BUILD warning.
Devise a variant of the original ADST, which allows butterfly
computation structure. This new transform has kernel of the
form: sin((2k+1)*(2n+1) / (4N)). One of its butterfly structures
using floating-point multiplications was reported in Z. Wang,
"Fast algorithms for the discrete W transform and for the discrete
Fourier transform", IEEE Trans. on ASSP, 1984.
This patch includes the butterfly implementation of the inverse
ADST/DCT hybrid transform of dimension 8x8.
Change-Id: I3533cb715f749343a80b9087ce34b3e776d1581d
This patch adds column-based tiling. The idea is to make each tile
independently decodable (after reading the common frame header) and
also independendly encodable (minus within-frame cost adjustments in
the RD loop) to speed-up hardware & software en/decoders if they used
multi-threading. Column-based tiling has the added advantage (over
other tiling methods) that it minimizes realtime use-case latency,
since all threads can start encoding data as soon as the first SB-row
worth of data is available to the encoder.
There is some test code that does random tile ordering in the decoder,
to confirm that each tile is indeed independently decodable from other
tiles in the same frame. At tile edges, all contexts assume default
values (i.e. 0, 0 motion vector, no coefficients, DC intra4x4 mode),
and motion vector search and ordering do not cross tiles in the same
frame.
t log
Tile independence is not maintained between frames ATM, i.e. tile 0 of
frame 1 is free to use motion vectors that point into any tile of frame
0. We support 1 (i.e. no tiling), 2 or 4 column-tiles.
The loopfilter crosses tile boundaries. I discussed this briefly with Aki
and he says that's OK. An in-loop loopfilter would need to do some sync
between tile threads, but that shouldn't be a big issue.
Resuls: with tiling disabled, we go up slightly because of improved edge
use in the intra4x4 prediction. With 2 tiles, we lose about ~1% on derf,
~0.35% on HD and ~0.55% on STD/HD. With 4 tiles, we lose another ~1.5%
on derf ~0.77% on HD and ~0.85% on STD/HD. Most of this loss is
concentrated in the low-bitrate end of clips, and most of it is because
of the loss of edges at tile boundaries and the resulting loss of intra
predictors.
TODO:
- more tiles (perhaps allow row-based tiling also, and max. 8 tiles)?
- maybe optionally (for EC purposes), motion vectors themselves
should not cross tile edges, or we should emulate such borders as
if they were off-frame, to limit error propagation to within one
tile only. This doesn't have to be the default behaviour but could
be an optional bitstream flag.
Change-Id: I5951c3a0742a767b20bc9fb5af685d9892c2c96f
and called this function in vp9_dequant_idct_add_32x32_c when
eob == 1. For the test clip used, the decoder performance improved
by 21+%. Based on Yaowu's 16 point idct work.
Change-Id: Ib579a90fed531d45777980e04bf0c9b23c093c43
fixed a function prototypes to prevent compiler warnings;
removed a function not in use;
un-capitialize "Refstride" to ref_stride
Change-Id: Ib4472b6084f357d96328c6a06e795b6813a9edba
This commit changes the inverse 16 point dct to use the same algorithm
as the one for 32 point idct. In fact, now 16 point dct uses the exact
version of the souce code for even portion of the 32 point idct.
Tests showed current implementation has significant better accuracy
than the previous version. With this implementation and the minor bug
fix on forward 16 point dct, encoding tests showed about 0.2% better
compression of CIF set, test results on std-hd setting pending.
Change-Id: I68224b60c816ba03434e9f08bee147c7e344fb63
This experiment gives little gains and adds relatively much code
complexity (and it hinders other experiments), so let's get rid of
it.
Change-Id: Id25e79a137a1b8a01138aa27a1fa0ba4a2df274a
Updated the rtcd_defs and used the sse2 uv version
of the loopfilter. The performance improved by ~8%
for the test clip used.
Change-Id: I5a0bca3b6674198d40ca4a77b8cc722ddde79c36
This patch removes the old pred-filter experiment and replaces it
with one that is implemented using the switchable filter framework.
If the pred-filter experiment is enabled, three interopolation
filters are tested during mode selection; the standard 8-tap
interpolation filter, a sharp 8-tap filter and a (new) 8-tap
smoothing filter.
The 6-tap filter code has been preserved for now and if the
enable-6tap experiment is enabled (in addition to the pred-filter
experiment) the original 6-tap filter replaces the new 8-tap smooth
filter in the switchable mode.
The new experiment applies the prediction filter in cases of a
fractional-pel motion vector. Future patches will apply the filter
where the mv is pel-aligned and also to intra predicted blocks.
Change-Id: I08e8cba978f2bbf3019f8413f376b8e2cd85eba4
Various fixups to resolve issues when building vp9-preview under the more stringent
checks placed on the experimental branch.
Change-Id: I21749de83552e1e75c799003f849e6a0f1a35b07
For coefficients, use int16_t (instead of short); for pixel values in
16-bit intermediates, use uint16_t (instead of unsigned short); for all
others, use uint8_t (instead of unsigned char).
Change-Id: I3619cd9abf106c3742eccc2e2f5e89a62774f7da
As suggested by Yaowu, we can use eob to reduce the complexity
of the vp9_ihtllm_c function. For the 1080p test clip used, the decoder
performance improved by 17%.
Change-Id: I32486f2f06f9b8f60467d2a574209aa3a3daa435
This adds Debargha's DCT/DWT hybrid and a regular 32x32 DCT, and adds
code all over the place to wrap that in the bitstream/encoder/decoder/RD.
Some implementation notes (these probably need careful review):
- token range is extended by 1 bit, since the value range out of this
transform is [-16384,16383].
- the coefficients coming out of the FDCT are manually scaled back by
1 bit, or else they won't fit in int16_t (they are 17 bits). Because
of this, the RD error scoring does not right-shift the MSE score by
two (unlike for 4x4/8x8/16x16).
- to compensate for this loss in precision, the quantizer is halved
also. This is currently a little hacky.
- FDCT and IDCT is double-only right now. Needs a fixed-point impl.
- There are no default probabilities for the 32x32 transform yet; I'm
simply using the 16x16 luma ones. A future commit will add newly
generated probabilities for all transforms.
- No ADST version. I don't think we'll add one for this level; if an
ADST is desired, transform-size selection can scale back to 16x16
or lower, and use an ADST at that level.
Additional notes specific to Debargha's DWT/DCT hybrid:
- coefficient scale is different for the top/left 16x16 (DCT-over-DWT)
block than for the rest (DWT pixel differences) of the block. Therefore,
RD error scoring isn't easily scalable between coefficient and pixel
domain. Thus, unfortunately, we need to compute the RD distortion in
the pixel domain until we figure out how to scale these appropriately.
Change-Id: I00386f20f35d7fabb19aba94c8162f8aee64ef2b
Only declare the functions in vpx_scale RTCD and include the relevant
header.
Remove unused files and functions in vpx_scale to avoid wasting time
renaming. vpx_scale/win32/scaleopt.c contains functions which have not
been called in a long time but are potentially optimized.
The 'vp8' functions have not been renamed yet. That is for after the
cleanup.
Change-Id: I2c325a101d60fa9d27e7dfcd5b52a864b4a1e09c
Only declare the functions in vpx_scale RTCD and include the relevant
header.
Remove unused files and functions in vpx_scale to avoid wasting time
renaming. vpx_scale/win32/scaleopt.c contains functions which have not
been called in a long time but are potentially optimized.
The 'vp8' functions have not been renamed yet. That is for after the
cleanup.
Change-Id: I2c325a101d60fa9d27e7dfcd5b52a864b4a1e09c
Support for gyp which doesn't support multiple objects in the same
static library having the same basename.
Change-Id: Ib947eefbaf68f8b177a796d23f875ccdfa6bc9dc
