Initial attempt at using new segment feature signaling
to indicate 4x4 or 8x8 transform.
needs --enable-experimental --enable-t8x8
Note this is work in progress.
Change-Id: Ib160d46a5d810307bfcbc79853ce1a65b5b870b7
Added code to clip the buffer level to the maximum buffer
size. Without this the buffer level would increase
unchecked.
This bug was found when encoding an essentially static
scene at 2Mb/s. The encoder is unable to generate frames
consistent with the high data-rate because Q bottoms out
at Qmin.
As frames generated are consistently undersized the buffer
level increases and does not get checked against the
maximum size specified by the user (or default).
Change-Id: Id8a3c6323d3246da50f7cb53ddbf78b5528032c6
Fix compiler warning for passing a non const array
to a function expecting a const array by using an
intermediary pointer and casting.
Change-Id: I9bdd358ebdc926223993fb8fb2098ffedd2f3fc7
Temporary check in to turn off other segment features
tests when #if CONFIG_T8X8 is set as the assignment of
MBs to differnt segments in each case will conflict.
The 8x8 code will be modified to use the new segment
feature method properly in a later check in.
Increase bits allowed for EOB end stop marker to 6 ready
for 8x8.
Change-Id: I4835bc8d3bf98e1775c3d247d778639c90b01f7f
No change to functionality or output.
Updates to the segment feature data structure now all done
through functions such as set_segdata() and get_segdata()
in seg_common.c.
The reason for this is to make changing the structures (if needed)
and debug easier.
In addition it provides a single location for subsequent addition
of range and validity checks. For example valid combination of
mode and reference frame.
Change-Id: I2e866505562db4e4cb6f17a472b25b4465f01add
This commit tries to do UV intra mode coding adaptive to Y intra mode.
Entropy context is defined as conditional PDF of uv intra mode given
the Y mode. All constants are normalized with 256 to be fit in 8 bits.
This provides further coding efficiency beyond the quantizer adaptive
y intra mode coding. Consistent gains were observed on all clips and
all bit rates for HD all key encoding tests.
To test, configure with
--enable-experimental --enable-uvintra
Change-Id: I2d78d73f143127f063e19bd0bac3b68c418d756a
As discovered in path 10 of Change Ia12acd2f, reset 2nd order coeffs
without reset of above and left coding context may have introduced
problem that causes encoder/decoder mismatching. This commit added
update to coding context when the 2nd coefficients are cleared.
In addition, this commit also introduced early breakout in the checks
to speed up when coefficients are too significant to be cleared.
Change-Id: I85322a432b11e8af85001525d1e9dc218f9a0bd6
Removal of configure #ifdefs so that segment features
always available. Removal of code supporting old
segment feature method.
Still a good deal of tidying up to do.
Change-Id: I397855f086f8c09ab1fae0a5f65d9e06d2e3e39f
Changed 'int eob' to 'char *eob' in BLOCKD so that both encoder and
decoder will use eobs[25] array from MACROBLOCKD structure. In future,
this will enable use of the decoder side IDCT in the encoder.
Change-Id: I6e1c011628cb8864fd4a0b80f0279ce16a5ca978
Modify reference frame segmentation so that ONE or MORE
reference frames may be marked as a available for a given
segment.
Fixed bugs relating to segment coding of INTRA and some
INTER modes at the segment level.
Modified Q boost for static areas based on ambient average Q.
Strong results now on clips with significant static areas.
(some data points in derf set as high as 9% and some static &
slide show type content in YT set > 20%)
Change-Id: Ia79f912efa84b977f35a23683ae3643251e24f0c
In some situations (f.g. error-resilient is turned on), vp8cx_mb
_init_quantizer() was called once per macroblock. Added checks
to avoid calculations when there is no change.
Change-Id: Ie4f0a5ade2202041254990a4e9d5b03bd1ac5aea
The block of code skipped testing the current mode if the
reference frame is AltRef, the mv is not (0,0) and
ARNR filtering is disabled.
This block of code has already been tested above if the
macro CONFIG_SEGFEATURES is set to 0.
Change-Id: I3f5710bb8270caad06c9a0eee59fa0daf1f70776
The variable this_mode was being used before it had been
initialized.
Moved the line that sets-up this_mode toward the top of the
enclosing loop, prior to its first use. The bug would result in
tests in the loop lagging the mode that was expected to be
tested.
Change-Id: If4e51600449ce6b4285f112da17a44c24b4a19fb
Some correction for entropy impact of segment signaled (EOB and ref frame)
Other slight tweaks.
Derf VBR average gain now over 1% (best over 7%)
One YT test clip has gains of circa 30% (VBR)
There is still an issue with noisy clips where making the background static
and coded with 0,0 can have a negative effect, especially at low Q.
This is probably because of the loss of smoothing by fractional pixel filters.
Change-Id: I7a225613c98067b96f8fc7a7e36f95d465b2b834
It is discovered that in rare situations the 2nd order block may
produce a few small magnitude coefficients that has no effect on
reconstruction. The situations are a combination of low quantizer
values (high quality) and low energy in residual signals (content
dependent). This commit added code to detect such cases and reset
the 2nd order block to all 0.
Patch 1 to 4 used code to do all-zero-check on idct result buffer,
and tests on derf set showed a consistent gain of .12%-.14% on all
metrics.But due to a recent change Ie31d90b, the idct result buffer
is not longer populated. So patch 5&6 use an alternative method to
detect the situations. Tests on derf set now shows a consistent
quality gain of .16%-.20%.
As suggested by Jim, Patch 7&8 removed the condition of all first
order block not having any coefficient, instead we reset 2nd order
coefficients to all 0 if sum of absolute value of the coefficients
is small. So it does slightly more than just detecting the oddity
as discussed above, but tests on derf set now show a consistent
gain of .20%-.23% on all metrics.
It is worth noting here that this change does not have any effect
on mid/high quantizer range, it only affects the quantizer value
18 or blow. Within this range, the change helps compression by up
to 2.5% on clips in the derf set.
Change-Id: I718e19cf59a4fc2462cb7070832759beb9f7e7dd
The partial frame copy function used to copy an extra 8 lines above
and below. The partial frame filtering can only modify 3 pixel rows
above the partial frame. Reduce copy to bare minimum needed, which is
4 lines, so that partial filtering on copied frame is possible.
Define the "magic" fraction number for partial filtering in
loopfilter.h .
Change-Id: I4791ffc541b6884b12759a0d0714a8faf16147ec
Only encode sign bit for feature data that can have a sign.
Tweaks to the test segmentation rules so that it now actually gives
a net benefit on the derf set of about 0.4% though much higher
on some clips at the low end.
Change-Id: I8e61f1aebf41c9037db7e67e2f8975aa18a0c986
This quite large check in includes the following:
Merge in some code from Ronald (mbgraph.c) that scans a Gf/arf group.
This is used as a basis for a simple segmentation for the normal frames
in a gf/arf group. This code also uses satd functions from Yaowu.
Adds functionality for coding the latest possible position of an EOB for
blocks in the segment. (Currently 0-15 only, hence just for 4x4 dct).
Where the EOB position is 0 this acts like "skip" and the normal coding
of skip at the per mb level is disabled.
Added functions (seg_common.c) for setting and reading segment feature
elements. These may want to be optimized away at some point but while the
mecahnism is in a state of flux they provide a single location for making
changes and keep things a bit cleaner.
This is still proof of concept code. Currently the tested feature set:-
Quantizer,
Loop Filter level,
Reference frame,
Prediction Mode,
EOB end stop.
TBD:-
Add functions for setting and reading the feature data with range
and validity checking.
Handling of signed and unsigned feature data. At the moment all is assumed
to be signed and a sign bit is coded but many cannot be negative.
Correct handling of EOB feature with intra coded blocks.
Testing/trapping of legal/illegal ref frame and mode combinations.
Transform size switch plus merge and test with 8c8 DCT work
Merge and test with Sumans Segmenation coding optimizations
Change-Id: Iee12e83661c7abbd1e0ce6810915eb4ec35e2d8e
check to make sure that cx_data buffer has enough room before
writting to it, prior behavior did not which could result in a crash.
Change-Id: I3fab6f2bc4a96d7c675ea81acd39ece121738b28
During the _pick only the Y plane is examined. In addition, data beyond
the borders of the frame is not read.
Change-Id: Ic549adfca70fc6e0b55f8aab0efe81f0afac89f9
Instead of using the predict buffer, the decoder now writes
the predictor into the recon buffer. For blocks with eob=0,
unnecessary idcts can be eliminated. This gave a performance
boost of ~1.8% for the HD clips used.
Tero: Added needed changes to ARM side and scheduled some
assembly code to prevent interlocks.
Patch Set 6: Merged (I1bcdca7a95aacc3a181b9faa6b10e3a71ee24df3)
into this commit because of similarities in the idct
functions.
Patch Set 7: EC bug fix.
Change-Id: Ie31d90b5d3522e1108163f2ac491e455e3f955e6
It was crashing when number of partitions was bigger than the number
of MB rows (ex. 128x96 with 8 partitions).
Start point was not checked against mb_rows, plus extra
"empty" partitions were not written out.
Change-Id: I9c2f013b9ec022354b658fab4ef799ff8b1de93d
Added the ability to create rate-targeted, temporally
scalable, VP8 compatible bitstreams.
The application vp8_scalable_patterns.c demonstrates how
to use this capability. Users can create output bitstreams
containing upto 5 temporally separable streams encoded
as a single VP8 bitstream.
(previously abandoned as:
I92d1483e887adb274d07ce9e567e4d0314881b0a)
Change-Id: I156250a3fe930be57c069d508c41b6a7a4ea8d6a
buffer_level in VP8_COMP and starting_buffer_level, optimal_buffer_level
and maximum_buffer_size in VP8_CONFIG changed from int to int64_t
to avoid potential crash issues for larger target bit rates.
Change-Id: I0d5ab6c8a44c2fef51f30cd8df4bb4b739c5df26
Previous entropy probs need to be saved (and restored) only when
current updates are not propagated.
Change-Id: Ie6ee0543066e30874e56258be0a6b7d2dd2fdb2b
Uninitialized data could be written to the first pass file when no
motion vectors are present in the frame.
Also fix a number of compiler warnings.
Change-Id: Icc9f53b6d33da9de4563d86d9fd591910473ea90
Proof of concept test code that encodes mode and reference
frame data at the segment level.
Decode-able bit stream but some issues not yet resolved.
As it this helps a little on a couple of clips but hurts on most as
the basis for segmentation is unsound.
To build and test, configure with
--enable-experimental --enable-segfeatures
Change-Id: I22a60774f69273523fb152db8c31f4b10b07c7f4
vp8_find_near_mvs() is being called on all possible reference frames
but the data computed may be used if the loop exits early, which can
be due to x->skip beign set to 1.
Optimize this by call vp8_find_near_mvs() laziy only if it is going
to be used and not computed yet.
Change-Id: Iccdbd4c962a670c9f2c99b8aca8096042ca5dc98
