Commit Graph

17 Commits

Author SHA1 Message Date
Paul Wilkins
9c9300f56f Merged NEWNEAR experiment
This commit merges the NEWNEAR experiment such that it
is effectively always on.

The fact that there were changes in the threading code again
highlights the need to strip out such features during the
bitstream development phase as trying to maintain this code
(especially as it is not being tested) slows the development cycle.

Change-Id: I8b34950a1333231ced9928aa11cd6d6459984b65
2012-02-06 16:40:57 +00:00
Yaowu Xu
4e9b4a1570 changed mode_context update strategy
Previously, the mode context is always udpated based on stats of current
frame, when there is no count, 50% is used for both left and right branch.
However, it is observed that with such strategy, a small count or no count
at all can skew the probability distribution significantly. This commmit
changed the mode_context update strategy to prevent small counts from
skewing the probability distributions.

Tests on derf set showed a small gain:  .06% in psnr and .09% in ssim

Change-Id: Ic812e64ae5f70251c170b0717f7b7fa587055488
2011-12-21 12:05:10 -08:00
Yaowu Xu
be360d47f4 Enabled adaptive UV intra coding for inter frames
Previously, Y-adaptive UV intra coding only enabled on key frames in
UVINTRA experiment. This commit enabled the same coding for inter
frames, so the encoding of UV intra modes are consistent cross all
frame types. Tests on derf set showed a very small overall gain around
.04%:

http://www.corp.google.com/~yaowu/no_crawl/interUVintra.html

The gain looks to be reasonable given inta coded MBs is only a
small portion of MBs in inter frames.

Change-Id: Ic6fc261923f2c253f4a0c9f8bccf4797557b9e16
2011-12-09 14:44:13 -08:00
Yaowu Xu
ba1a6619b3 Revised coding using adaptive mode context to depend on frame type
A previous commit 76feb965 made the vp8_mode_context adaptive on a frame
frame basis, this commit further made the coding context adaptive to two
frame types separately. Tests on derf set showed a further small gain on
all metrics: avg psnr 0.10%, glb psnr: 0.11%, ssim: 0.08%

http://www.corp.google.com/~yaowu/no_crawl/newNearMode_1209.html

Change-Id: I7b3e32ec8729de1903d14a3f1213f1624b78cdee
2011-12-09 12:13:42 -08:00
Yaowu Xu
d37cd97682 Removed #if CONFIG_I8X8
This commit removed the macro CONFIG_I8X8, which was used to indicate
the 8x8 intra prediction experiment, made the change fully merged in.

Change-Id: Iafa4443781ce6e83f5591c12ba615a0e92ce0ea0
2011-12-07 13:48:53 -08:00
Yaowu Xu
76feb965d3 made vp8_mode_context adaptive
vp8_mode_contexts[] is an entropy table used to code inter mode
choices. It was a fixed constant table. This commit made the entropy
context adaptive. Tests on derf set showed very good consistent gains
on all metrics: avg psnr .47%, overall psnr .46% and ssim .40%.

http://www.corp.google.com/~yaowu/no_crawl/newModeContext.html

Change-Id: Ia62b14485c948e2b74586118619c5eb2068b43b2
2011-12-07 11:01:59 -08:00
Yaowu Xu
a8fbab8697 enabled 8x8 intra prediction modes on inter frames
This commit enabled the usage of 8x8 intra prediction modes on inter
frames. There are a few TODO items related to this: 1)baseline entropy
need be calibrated; 2)cost of UV need to be done more properly rather
than using decision only relying on Y; 3)Threshold for allowing picking
8x8 intra prediction should be lowered to lower than the B_PRED.

Even with all the TODOs, tests showed consistent gain on derf set ~0.1%
(PSNR:0.08% and SSIM:0.14%). It is assumed that 8x8 intra prediction
will help more on large resolution clips, especially with above TODOs
addressed.

Change-Id: I398ada49dfc32575cfab962a569c2885111ae3ba
2011-12-02 13:44:47 -08:00
Yaowu Xu
2bbde25003 make uv intra mode coding adaptive to Y mode
This commit tries to do UV intra mode coding adaptive to Y intra mode.
Entropy context is defined as conditional PDF of uv intra mode given
the Y mode. All constants are normalized with 256 to be fit in 8 bits.

This provides further coding efficiency beyond the quantizer adaptive
y intra mode coding. Consistent gains were observed on all clips and
all bit rates for HD all key encoding tests.

To test, configure with
--enable-experimental --enable-uvintra

Change-Id: I2d78d73f143127f063e19bd0bac3b68c418d756a
2011-11-03 21:48:08 -07:00
Yaowu Xu
1d44e7ce1f enable selecting&transmitting to for intra mode entropy
This commit added a 3 bit index to the bitstream, the index is used to
look into the intra mode coding entropy context table. The commit uses
the mode stats to calculate the cost of transmitting modes using 8
possible entropy distributions, and selects the distribution that
provides the lowest cost to do the actual mode coding.

Initial test show this provides additional .2%~.3% gain over quantizer
adaptive intra mode coding. So the adaptive intra mode coding provides
a total of .5%(psnr) to .6% gain(ssim) combined for all-key-encoding

To build and test, configure with
--enable-experimental --enable-qimode

Change-Id: I7c41cd8bfb352bc1fe7c5da1848a58faea5ed74a
2011-09-16 16:33:19 -07:00
Yaowu Xu
aac2c12663 add quantizer adaptive intra mb mode encoding
make intra mode coding entropy distribution adaptive to baseQindex, an
encoding test on hd clips with all key frame shows universal gain on
all clips in both .2%(psnr) and (ssim).3%.

To build and test, configure with
--enable-experimental --enable-qimode

Change-Id: Iaa69241b984d4fdd8baa6d77ee78c0140f5ac00a
2011-09-16 16:26:35 -07:00
Yaowu Xu
ca6b85aa4e add 8x8 intra prediction modes
Patch 1 to Patch 3 is an initial implementation of 8x8 intra prediction
modes, here are with the following assumptions:
a. 8x8 has 4 prediction modes DC, H, V and TM
b. UV 4x4 block use the same mode as corresponding 8x8 area
c. i8x8 modes are enabled for key frame only for now
Patch 4:
d. removed debug code from previous patches
Patch 5:
e. added stats code to collect entropy stats and further cleaned up
Patch 6:
f. changed mode stats code to collect finer stats of modes
Patch 7:
g. normalized i8x8 modes distribution to total at 256 (8bits).
Patch 8:
h. fixed a bug in decoder and removed debug printf output.
Patch 9:
i. more cleanups to address paul's comment
Patch 10:
j. messy rebase/merges to bring the commit up to date.

Tests on HD clips encoded with all key frame showing consistent gain
on all clips and all metrics:~0.5%(psnr) and 0.6%(ssim):
http://www.corp.google.com/~yaowu/no_crawl/i8x8hd_allkey_fixedq.html

To build and test, configure with:
--enable-experimental --enable-i8x8

Change-Id: I9813fe07ae48cab5fdb5d904bca022514ad01e7f
2011-09-16 15:55:19 -07:00
Scott LaVarnway
a39321f37e Use int_mv instead of MV in vp8_mv_cont
Less operations.

Change-Id: Ibb9cd5ae66b8c7c681c9a654d551c8729c31c3ae
2011-05-24 16:01:12 -04:00
John Koleszar
c2140b8af1 Use WebM in copyright notice for consistency
Changes 'The VP8 project' to 'The WebM project', for consistency
with other webmproject.org repositories.

Fixes issue #97.

Change-Id: I37c13ed5fbdb9d334ceef71c6350e9febed9bbba
2010-09-09 10:01:21 -04:00
John Koleszar
392a958274 avoid negative array subscript warnings
The mv_ref and sub_mv_ref token encodings are indexed from NEARESTMV
and LEFT4X4, respectively, rather than being zero-based like the
other token encodings.

Change-Id: I3699c3f84111209ecfb91097c4b900773e9a3ad5
2010-08-11 13:49:12 -04:00
John Koleszar
94c52e4da8 cosmetics: trim trailing whitespace
When the license headers were updated, they accidentally contained
trailing whitespace, so unfortunately we have to touch all the files
again.

Change-Id: I236c05fade06589e417179c0444cb39b09e4200d
2010-06-18 13:06:11 -04:00
John Koleszar
09202d8071 LICENSE: update with latest text
Change-Id: Ieebea089095d9073b3a94932791099f614ce120c
2010-06-04 16:19:40 -04:00
John Koleszar
0ea50ce9cb Initial WebM release 2010-05-18 11:58:33 -04:00