This commit enables 16x16 ADST/DCT forward hybrid transform using SSE2
operations. It reduces the runtime from 5433 cycles to 1621 cycles, at
no compression performance loss.
Change-Id: I75fd7f1984e9e28846af459f810ff0d6ae125230
If none of the 16 coefficients that we quantize per loop iteration
are larger than the zbin, directly skip to the next round of coeffs,
rather than doing a full quantize loop that will eventually result
in 16 zeroes. This incurs a jump cost, but saves a lot of other work.
32x32 quant goes from 1349 -> 1184 cycles. The same approach yielded
no significantly positive results for smaller transforms, so is not
used there (8x8: 103 -> 101 cycles; 16x16: 302 -> 306 cycles).
Change-Id: I8fca17dc2543fc8eed1dbcd5100145e3c3a9b647
Encode time of bus (speed 0) 50 frames @ 1500kbps goes from 2min14.4 to
2min10.1, i.e. a 2.3% overall speed increase.
Change-Id: I3699580e74ec26c7d24e03681bc47ba25ee1ee87
Total encoding time for first 50 frames of bus (speed 0) @ 1500kbps
goes 2min34.8 to 2min14.4, i.e. a 10.4% overall speedup. The code is
x86-64 only, it needs some minor modifications to be 32bit compatible,
because it uses 15 xmm registers, whereas 32bit only has 8.
Change-Id: I2df53770c2e850813ffa713e1a91b45b0082b904
This commit enables SSE2 4x4 foward hybrid transform. The runtime
goes from 249 cycles down to 74 cycles. Overall around 2% speed-up
at no compression performance change.
Change-Id: Iad4d526346e05c7be896466c05500711bb763660
This commit replaces zrun_zbin_boost, a method of biasing non-zero
coefficients following runs of zero-coefficients to be rounded towards
zero, with an explicit skip-block choice in the RD loop.
The logic is basically that if individual coefficients should be rounded
towards zero (from a RD point of view), the trellis/optimize loop should
take care of it. If whole blocks should be zero (from a RD point of
view), a single RD check is much more efficient than a complete
serialization of the quantization loop.
Quality change: derf +0.5% psnr, +1.6% ssim; yt +0.6% psnr, +1.1% ssim.
SIMD for quantize will follow in a separate patch. Results for other
test sets pending.
Change-Id: Ife5fa641163ac5150ac428011e87188f1937c1f4
The aligned array in parameter list caused win32 build to report
c2719 error. This commit fixed the issue by make the parameter
type a pointer instead of an array.
Change-Id: I4ed654ce4eba2db4995d9cdc136c68e9a6acc992
Makes first 50 frames of bus @ 1500kbps encode from 3min22.7 to 3min18.2,
i.e. 2.3% faster. In addition, use the sub_pixel_avg functions to calc
the variance of the averaging predictor. This is slightly suboptimal
because the function is subpixel-position-aware, but it will (at least
for the SSE2 version) not actually use a bilinear filter for a full-pixel
position, thus leading to approximately the same performance compared to
if we implemented an actual average-aware full-pixel variance function.
That gains another 0.3 seconds (i.e. encode time goes to 3min17.4), thus
leading to a total gain of 2.7%.
Change-Id: I3f059d2b04243921868cfed2568d4fa65d7b5acd
This commit makes use of the butterfly structure to enable the sse2
version implementation of 8x8 ADST/DCT hybrid transform coding.
The runtime of hybrid transform module goes down from 1170 cycles
to 245 cycles. Overall speed-up around 1.5%.
Change-Id: Ic808ffd21ece8a9d0410d8c0243d7b6c28ac3b3f
Change vp9_block_error() to return a 64bit error variable, change all
callers to expect a 64bit return value (this will prevent overflows,
which we basically don't check for at all right now). Remove duplicate
block_error() function, which fixed that through truncation. Remove
old (incompatible) mmx/sse2 block_error SIMD versions and replace with
a new one that returns a 64bit value.
Encoding time of first 50 frames of bus @ 1500kbps goes from 3min29 to
3min23, i.e. a 3% overall speedup.
Change-Id: Ib71ac5508b5ee8a80f1753cd85d72df1629abe68
Encoding of bus @ 1500kbps (first 50 frames) goes from 3min57 to
3min35, i.e. approximately a 10.5% speedup. Note that the SIMD versions
which use a bilinear filter (x_offset & 7 || y_offset & 7) aren't
perfectly interleaved, and can probably be improved further in the
future. I've marked this with a few TODOs/FIXMEs in the code.
Change-Id: I5c9e900c0f0d32e431a50fecae213b510b2549f9
This seems to only be used in the encoder. Also remove an empty wrapper
file that contained forward declarations for this function, but didn't
actually define any actual functions.
Change-Id: Ifc561eef7ebe374a7d03698055e51e105f6d614b
The encoding time for bus at CIF goes from 661s to 625s. This commit
also enabled unit test of sad8x4/4x8 in sad_test.cc.
Change-Id: If3d10ebb56bda584bdb69bcf056599d580b12cb1
Conflicts:
vp9/common/vp9_findnearmv.c
vp9/common/vp9_rtcd_defs.sh
vp9/decoder/vp9_decodframe.c
vp9/decoder/x86/vp9_dequantize_sse2.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_common.mk
Resolve file name changes in favor of master. Resolve rdopt changes in
favor of experimental, preserving the newer experiments.
Change-Id: If51ed8f457470281c7b20a5c1a2f4ce2cf76c20f
vp9_dequantize_x86 has only sse2 functions.
vp9_dct_sse2_intrinsics has no namespace collision and can drop
_intrinsics.
vp9_idct_mmx.h is unused.
Change-Id: Ic16e31fb372a1d1e841a62ecb4189fe8f95808ec
First in a series of commits making certain MACROBLOCK members
addressable per-plane. This commit also refactors the block subtraction
functions vp9_subtract_b, vp9_subtract_sby_c, etc to be
loops-over-planes and variable subsampling aware.
Change-Id: I371d092b914ae0a495dfd852ea1a3d2467be6ec3
Use in-place buffers (dst of MACROBLOCKD) for macroblock prediction.
This makes the macroblock buffer handling consistent with those of
superblock. Remove predictor buffer MACROBLOCKD.
Change-Id: Id1bcd898961097b1e6230c10f0130753a59fc6df
Merge various super_block_yrd and super_block_uvrd versions into one
common function that works for all sizes. Make transform size selection
size-agnostic also. This fixes a slight bug in the intra UV superblock
code where it used the wrong transform size for txsz > 8x8, and stores
the txsz selection for superblocks properly (instead of forgetting it).
Lastly, it removes the trellis search that was done for 16x16 intra
predictors, since trellis is relatively expensive and should thus only
be done after RD mode selection.
Gives basically identical results on derf (+0.009%).
Change-Id: If4485c6f0a0fe4038b3172f7a238477c35a6f8d3
Start grouping data per-plane, as part of refactoring to support
additional planes, and chroma planes with other-than 4:2:0
subsampling.
Change-Id: Idb76a0e23ab239180c818025bae1f36f1608bb23
Wrote sse2 functions of vp9_short_idct8x8 and vp9_short_idct10_8x8.
Compared to c version, the sse2 version is 2X faster. The decoder
test didn't show noticeable gain since 8x8 idct doesn't take much
of decoding time (less than 1% in my test).
Change-Id: I56313e18cd481700b3b52c4eda5ca204ca6365f3
sse4_1 code used uint16_t for returning sad, but that
won't work for 32x32 or 64x64. This code fixes the
assembly for those and also reenables sse4_1 on linux
Change-Id: I5ce7288d581db870a148e5f7c5092826f59edd81
