This commit enables SSE2 implementation of 16x16 inverse ADST/DCT
hybrid transform. The runtime goes from 5742 cycles -> 1821 cycles.
This provides about 1% encoding speed-up at speed 0.
Change-Id: I1678d0988bf30b9efd524877705bbb3645edb17b
Making implementation of vp9_set_pred_flag_{seg_id, mbskip} consistent
with vp9_get_segment_id without using confusing sub(a, b) macro. Passing
mi_row and mi_col to functions explicitly instead of replying on
mb_to_right_edge and mb_to_bottom_edge.
Change-Id: I54c1087dd2ba9036f8ba7eb165b073e807d00435
In the prior code, the above context pointers used for entropy
decoding were initialized on the first frame, and not updated when
the frame size changed. The per-frame code which initializes the
contexts assumes that the contexts are contiguous, leading to an
incomplete initialization when the frame is smaller. This commit
updates the pointers so that the context is contigous whenever
the frame size changes.
Change-Id: I08b53e3a30c8289491212311682ff1b8028cff6c
This is a short term optimization till we work out a decoder
implementation requiring no frame border extension.
Change-Id: I02d15bfde4d926b50a4e58b393d8c4062d1be70f
Cycle times:
4x4: 151 to 131 cycles (15% faster)
8x8: 334 to 306 cycles (9% faster)
16x16: 1401 to 1368 cycles (2.5% faster)
32x32: 7403 to 7367 cycles (0.5% faster)
Total encode time of first 50 frames of bus @ 1500kbps (speed 0)
goes from 1min39.2 to 1min38.6, i.e. a 0.67% overall speedup.
Change-Id: I799a49460e5e3fcab01725564dd49c629bfe935f
Renaming flatmask4 to flat_mask4, flatmask5 to flat_mask5, hevmask to
hev_mask, filter to filter4, mbfilter to filter8, wide_mbfilter to
filter16.
Change-Id: Ic61c73e59c2eee505257584867aafac99833cea1
Also inline some of the block calculations to assist the compiler to
not do silly things like calculating the same offset (or converting
between raster/transform block offset or block, mi and pixel unit)
many, many, many times.
Cycle times:
4x4: 584 -> 505 cycles (16% faster)
8x8: 1651 -> 1560 cycles (6% faster)
16x16: 7897 -> 7704 cycles (2.5% faster)
32x32: 16096 -> 15852 cycles (1.5% faster)
Overall, this saves about 0.5 seconds (1min49.8 -> 1min49.3) on the
first 50 frames of bus (speed 0) @ 1500kbps, i.e. 0.5% overall.
Change-Id: If3dd62453f8e2ab9d4ee616bc4ea956fb8874b80
Removing unused DEC_DEBUG define and dec_debug variable. Changing function
signatures to eliminate code duplication, renaming function
mb_init_dequantizer to init_dequantizer. Also removing redundant curly
braces, and comments.
Change-Id: Ia56ee1b0be5f24abb0e878581845be8a4773c298
Change the mbfilter Neon code from executing both branches if all
vectors follow only one branch.
The code is about 5% faster when executing only one branch and about
1% slower when executing both branches.
-PS5: Remove local stack space from mbfilter.
Change-Id: I6a23f9b318a9f4568a2718b4c9348db988fe2182
Skip the inverse transform and reconstruction of inter-mode coded
blocks in the rate-distortion optimization loop, when skip_encode_sb
feature is turned on. This provides about 1% speed-up at speed 0,
and 1.5% speed-up at speed 1. No performance change in both settings.
Change-Id: I2932718bf4d007163702b61b16b6ff100cf9d007
This speed feature allows the encoder to largely remove the spatial
dependency between blocks inside a 64x64 superblock, thereby removing
the need to repeatedly encode superblocks per partition type in the
rate-distortion optimization loop.
A major challenge lies in the intra modes tested in the rate-distortion
optimization loop. The subsequent blocks do not have access to the
reconstructed boundary pixels without the intermediate coding steps.
This was resolved by using the original pixels for intra prediction
in the rd loop, followed by an appropriately designed distortion
modeling on the quantization parameters. Experiments also suggested
that the performance impact is more discernible at lower bit-rate/psnr
settings. Hence a quantizer dependent threshold is applied to deactivate
skip of block coding.
For bus_cif at 2000 kbps,
speed 0: runtime 269854ms -> 237774ms (12% speed-up) at 0.05dB
performance loss.
speed 1: runtime 65312ms -> 61536ms, (7% speed-up) at 0.04dB
performance loss.
This operation is currently turned on in settings of speed 1.
Change-Id: Ib689741dfff8dd38365d8c1b92860a3e176f56ec
This commit enables SSE2 implementation of 8x8 inverse ADST/DCT
transform. The runtime goes from 1216 cycles -> 266 cycles.
For bus_cif at 2000 kbps, the overall runtime reduces from
253707ms -> 248430ms, i.e., 2% speed-up at speed 0.
Change-Id: Ib0372e17e9162d7b11a10d653b1c8be547c878fb
Adding missed parenthesis around boolean expressions. Bitstream is changed.
Regenerating test vectors.
Change-Id: I4cc00b761e9473f92f180a9fc3a0c607f0aaae56
This function is actually called from set_offsets which is called right
before vp9_read_mode_info.
Change-Id: Ibb9d5ad606194bc80eab264fad85b31c9dfd8f77
Super basic conversion from the other implementations. Any changes to
one should be trivial to copy over keep in sync.
Change-Id: I1720b4128e0aba4b2779e3761f6494f8a09d3ea8
this was never fleshed out in the context of VP8, for which it was
added. for VP9 it has no meaning.
Change-Id: Iba2ecc026d9e947067b96690245d337e51e26eff
Implements some of the helper functions more efficiently with
lookups rathers than branches. Modeling function is consolidated
to reduce some computations.
Also merged the two enums BLOCK_SIZE_TYPES and BlockSize into
one because there is no need to keep them separate (even though
the semantics are a little different).
No bitstream or output change.
About 0.5% speedup
Change-Id: I7d71a66e8031ddb340744dc493f22976052b8f9f
For some reason iOS builds take a really long time to sort this
function out.
It's not used anywhere so remove it.
Change-Id: Ia5c8513a0d9c7eb32641cca58ca1c1113e2dd9f4
Adding segmentation struct to vp9_seg_common.h. Struct members are from
macroblockd and VP9Common structs. Moving segmentation related constants
and enums to vp9_seg_common.h.
Change-Id: I23fabc33f11a359249f5f80d161daf569d02ec03
Independent horizontal and vertical implementations.
Requires that blocks be built from 4x4 and [xy]_step_q4 == 16
6-10% improvement. CIF improved the least.
Change-Id: I137f5ceae4440adc0960bf88e4453e55a618bcda
The function encode_block is called only by inter-prediction modes,
hence removing the transform type branching there.
Change-Id: I34a3172e28ce2388835efd0f8781922211bff857
With sf->auto_mv_step_size on it is questionable
whether sf->reduce_first_step_size is worthwhile.
At speed 2 it was not having a big impact.
Even at speed 2 sf->optimize_coefficients = 0 is not
having a big speed imapct so for now I have moved it
down into a higher speed setting.
Change-Id: I8a54de76d486ad37aabce76474889da2768b14c1
Enable SSE2 4x4 inverse ADST/DCT transform. The runtime goes from
292 cycles down to 89 cycles. Running bus_cif at 2000 kbps, the
overall runtime of speed 0 goes from 301s to 295s (2% speed-up).
Change-Id: I24098136e7fee7ab2fbf1c11755bdf2ca37f3628
Where possible, do the 16 pixel wide filter while doing the horizontal
filtering pass. The same approach can be taken for the mbloop_filter
when that's implemented. Doing so on the vertical pass is a little more
involved, but possible.
Change-Id: I010cb505e623464247ae8f67fa25a0cdac091320
This commit fixed the mis-use of the tx_type for inverse transform
in intra4x4 rate-distortion optimization loop. It improves the
overall coding performance.
Change-Id: I7fe9953175b74890357dbcee33c138573766e980
