When we encode slide-show clips, for the majority of the time,
only ZEROMV mode is checked, and all other modes are skipped.
This change delayed uv intra-mode evaluation until intra mode is
actually checked. This gave big performance gain for slide-show
video encoding (2nd pass gain: 18% to 28%). But, this change
doesn't help other types of videos.
Also, zbin_mode_boost is adjusted in mode-checking loop, which
causes bitstream mismatch before/after this change when --best
or --good with --cpu-used=0 are used.
Change-Id: I582b3e69fd384039994360e870e6e059c36a64cc
The "update" variable was used as a flag in coef_prob update dry run
that tests if a frame should encodes update at all. The wrong init
value forced the update happening always. fixing this has a minor
improvement in low bit rate situation when 8x8 transform is allowed.
Change-Id: Icb498e8d6a62fd074dcbc2065b797cba9237cb51
use oxcf instead of common in check to Reinit the
lookahead buffer if the frame size changes
prior behavior would cause assertion fail/crash
first observed in:
support changing resolution with vpx_codec_enc_config_set
Change-Id: Ib669916ca9b4f206d4cc3caab5107e49d39a36aa
For now the interface elements have been left in place
to make sure existing parameter files work but parameters
relating to drop frame wont do anything.
Change-Id: I579ee614726387381c546845dac4bc03c74c6a07
The Lagrangian interpolation filter is maximally flat in the
passband. There is non-trivial improvement with the hd set, while
for derf the results are virtually unchanged.
See:
http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html (derf)
http://www.corp.google.com/~debargha/vp8_results/enhinterpn_hd.html (HD)
Patch 2: Updated the results for derf in the html above to use the
new baseline. There is still about 4% improvement. Will update the
hd baseline later (since it takes 9 hours to run on my machine)
Patch 3: By mistake the default filter was left at 60 - should be 0
to use the new interpolation filter.
Change-Id: If5f64444976562415d68a2aeabb94fdfa0d47890
* Removes EDGE_PIXEL_FILTER for external sanpshot
* changes the default 8-tap filter based on high precision results
in http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html
* changes the default prob tables for high-precision mv encoding to
favor zeros in the last bit (i.e. quarter pel). This is only important
for short clips.
Change-Id: I02bb0de8679d9eec06cdbcc8160dbf073cd847a4
This is the initial patch for supporting 1/8th pel
motion. Currently if we configure with enable-high-precision-mv,
all motion vectors would default to 1/8 pel. Encode and
decode syncs fine with the current code. In the next phase
the code will be refactored so that we can choose the 1/8
pel mode adaptively at a frame/segment/mb level.
Derf results:
http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html
(about 0.83% better than 8-tap interpoaltion)
Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V
Patch 4: HD results.
http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html
Seems impressive (unless I am doing something wrong).
Patch 5: Added mmx/sse for bilateral filtering, as well as enforced
use of c-versions of subpel filters with 8-taps and 1/16th pel;
Also redesigned the 8-tap filters to reduce the cut-off in order to
introduce a denoising effect. There is a new configure option
sixteenth-subpel-uv which will use 1/16 th pel interpolation for
uv, if the motion vectors have 1/8 pel accuracy.
With the fixes the results are promising on the derf set. The enhanced
interpolation option with 8-taps alone gives 3% improvement over thei
derf set:
http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html
Results on high precision mv and on the hd set are to follow.
Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in
vp8/common/x86/x86_systemdependent.c
Patch 7: Cleaning up various debug messages.
Patch 8: Merge conflict
Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
When temporal layers is used (i.e., number_of_layers > 1),
we don't use the frame rate boost for setting the key
frame target size. The factor was forcing the target size to be
always at its minimum (2* per_frame_bandwidth) for low frame rates
(i.e., base layer frame rate).
Generally we should modify or remove this frame rate factor;
for now we turn if off for number_of_layers > 1.
Change-Id: Ia5acf406c9b2f634d30ac2473adc7b9bf2e7e6c6
Yunqing fixed an oddity in UVIntra skippable evaluation for stable
branch, which brought up the fact that the evaluation is broken.
The issue was that for MBs with 2nd order block, the eob for 1st
order blocks is set at 1. The previous evaluation did not take that
into account. This commit intend to fix the problem. The commit also
absorbed Yunqing's fix for UVIntra skippable evalution.
Test on hd showed some good gains in combination with LPF bias fix:
http://www.corp.google.com/~yaowu/no_crawl/LPFBias_FixSkip.html
(avg psnr: .34%, glb psnr: .32%, ssim: .22%)
Change-Id: I36af11c8ef7f643e8ff46da7bf3a167b437039d4
Reworked the code to use vp8_build_intra_predictors_mbuv_s
instead. This is WIP with the goal of eliminating all
functions in reconintra_mt.h
Change-Id: I61c4a132684544b24a38c4a90044597c6ec0dd52
The bias in picklpf intended to bias toward less greedy in getting
best frame level psnr while maximize overall quality for a clip.
This commit reduced the bias for frames using 8x8 transform to
achieve better compression overall.
The change improve compression by ~.15% consistently on most of the
HD clips tested.
http://www.corp.google.com/~yaowu/no_crawl/LPFBias_FixSkip.html
Change-Id: Ic30932d2b8eaebd52339b0195f569edc48eed7bc
In vp8_rd_pick_inter_mode(), if total of eobs is zero, rate needs
to be adjusted since there are no non-zero coefficients for
transmission. The uv intra eobs calculated in
rd_pick_intra_mbuv_mode() need to be saved before they are
overwritten by inter-mode eobs.
Change-Id: I41dd04fba912e8122ef95793d4d98a251bc60e58
mode_info_context->mbmi.mb_skip_coeff has to always reflect the
existence or not of coeffs for a certain MB. The loopfilter needs this
info.
mb_skip_coeff is either set by the vp8_tokenize_mb or has to be set to
1 when the MB is skipped by mode selection. This has to be done
regardless of the mb_no_coeff_skip value.
prob_skip_false is needed just when mb_no_coeff_skip is 1. No need to
keep count of both skip_false and skip_true as they are complementary
(skip_true+skip_false = total_mbs)
Change-Id: I3c74c9a0ee37bec10de7bb796e408f3e77006813
Depending on implementation the optimized SAD functions may return early
when the calculated SAD exceeds max_sad.
Change-Id: I05ce5b2d34e6d45fb3ec2a450aa99c4f3343bf3a
The commit rationized and simplified the entropy context conversion
betwen MB using 8x8 transform and MB using 4x4 transform. The old version
had a number of weirdness in how 4x4 transform MB's context is used for
8x8 blocks other than the first 8x8 within a MB.
Test showed the change has a gain ~.1% for avg psnr, glb psnr and ssim on
the limited HD set.
Change-Id: I774536c416baa6845aa741f956d8a69fa40e5d47
Refactoring some of the mode decoding logic introduced a bug where
the segmentation maps would not be properly reset on keyframes.
http://code.google.com/p/webm/issues/detail?id=378
The text of the bug is somewhat misleading as I initially read it to
imply the bug was present in v0.9.7-p1 (Cayuga), but note the text
"master", which indicates this was something subsequent. This issue
bisects back to v0.9.7-p1-84-ga99c20c, so unfortunately it was broken
during the Duclair release.
Thanks to Alexei Leonenko for investigating the root cause.
Change-Id: I9713c9f070eb37b31b3b029d9ef96be9b6ea2def
On Android NDK, rand() is inlined function. But, on our SSE optimization,
we need symbol for rand()
Change-Id: I42ab00e3255208ba95d7f9b9a8a3605ff58da8e1
