1. remove duplicate initialization to mbmi->interp_filter.
2. move mv clamping into ref_frame loop instead of mode checking loop.
3. move the check if last frame is same as golden frame earlier to
avoid initialization of Golden reference related variables.
Change-Id: Idf2d05e19e94a24f69cc289687869fc71d2ff289
This commit changes to use single loop to evaluate all inter modes.
There is no impact on compression quality and speed, but allow future
experiment with the order of modes evaluated.
Change-Id: I71696ce1014cbe127e25e98710d835987f5ecc09
Added a skip_dc check. If skip_dc = 1, we could eliminate calling
of vp9_model_rd_from_var_lapndz(). This gave slight PSNR & SSIM
gain(<0.1%), and no speed change.
Change-Id: If5ca733366148c86b98e196a00cc890f50e9a3e5
This commit removes the pred_mv_sad comparison from rtc motion
search, given that a stronger comparison has been done at the
mode search level to eliminate unlikely selected reference frames.
Change-Id: I49b8d24b2174303066fd8eff2102c0648f2869df
This commit enables the rtc coding mode to run integral projection
based motion search for golden reference frame. It improves the
speed -6 compression performance by 1.1% on average, 3.46% for
jimred_vga, 6.46% for tacomascmvvga, and 0.5% for vidyo clips. The
speed -6 is about 6% slower.
Change-Id: I0fe402ad2edf0149d0349ad304ab9b2abdf0c804
Only update the rd_thresh factors for modes sharing same reference
frame. This helps overall compression of 6 and 7 by .13% and .19%
respectively without any noticeable speed difference.
Change-Id: Idb3a3879512c5d7d0880034516079949290690c5
When golden reference frame is refreshed, the next frame has both
its last and golden reference frames point to the same reference
frame in real-time coding mode. Experiments suggest that using
two separate reference frames for frames right after golden refresh
frame does not provide further compression performance advantage.
This commit hence retains the current encoder implementation and
shuts off the mode search over golden reference frame in this case.
It makes the encoder run slightly faster at no coding performance
change.
Change-Id: I1561f7799253a10e675d05c63c1749fe9e85b472
While searching for the best mode in non-rd case, SSE of
a partition block is calculated and the transform size is set.
This patch rewrites the skip checking conditions based on
transform size instead of partition size to be more precise.
Small gains were seen in rtc set borg test (speed 6).
AVG PSNR: 0.087%, overall PSNR: 0.073%, SSIM: 0.146%.
No noticeable speed change.
Change-Id: I5603ca5339c784dfa02263f4005988ccd8c32f6e
Frame buffers are now allocated dynamically on-demand.
Entries in the reference frame map, cm->ref_frame_map,
may now be set to -1 (INVALID_IDX) to indicate that
there is not a valid reference buffer in that "slot".
All slots in the reference frame map are now initialized
to the empty state (-1) and each buffer is initialized
to have a reference count of 0.
Change-Id: Id1afe98de98db4ae8b2dfefed7889c3b28c68582
This commit replaces the SAD with variance as metric for the
integral projection vector match. It improves the search accuracy
in the presence of slight light change. The average speed -6
compression performance for rtc set is improved by 1.7%. No speed
changes are observed for the test clips.
Change-Id: I71c1d27e42de2aa429fb3564e6549bba1c7d6d4d
Target higher delta-qp for big blocks with zero motion,
and for segment#1: avoid 64x64 partition size and force 8x8 tx size.
Metrics on RTC set mostly positive: SSIM up by ~4%, PSRN by ~1.5%.
Doesn't seem to be any change in speed.
Change-Id: I1f68fa3c4f62dab3b90cc58041f05ebb048ae5ac
Modified the thresholds of deciding whether or not to skip
the transforms in model_rd_for_sb_y(). Used zbin[] instead
of dequant[] to be more precise. Also, modified the checking
coditions.
Rtc set borg test results (at speed 6) showed:
average PSNR gain: 0.138%, overall PSNR gain: 0.158%,
and SSIM gain: 0.177%.
The data rate test was modified slightly as suggested by
Marco.
Change-Id: Ieaf633ab77f4838cb3c45cf69065b29d55f8ae6c
Replaced a divide by 9 with 8, so some very small difference,
but otherwise no change in behavior.
Change-Id: I1079ae3c41e0789ff0bc6fa9940a238b6bca0f5b
This commit allows the encoder to properly account for the mode
cost in sub8x8 non-RD mode decision.
Change-Id: I2951960d20e37ed08e372ee0c7044935b2b9b899
Add the rate cost on inter prediction filter type to the overall
rate-distortion cost in vp9_pick_mode_inter.
Change-Id: I72c34017adf5220cadb3962694ee5404469fc673
This commit adds a heuristic rate cost of reference frame to the
non-RD mode decision. It improves the compression performance of
speed -6 by 0.31% and speed -5 by 0.69%.
Change-Id: If7f3b45519d49b2cb640bcb7316a254efc8be446
This commit makes the ZEROMV mode first in the search order to
ensure that the zero mv is always checked in the RTC coding mode.
It improves the average speed -6 compression performance by 0.3%
in both PSNR and SSIM at no visible speed change.
Change-Id: I465a7e59f4e20cd84fee3f02ced6f98036945949
Reuse the yv12_mb array to fetch the buffer pointers/strides
corresponding to the current reference frame.
Change-Id: I5276b7494158b2cccef15213be2dc189e9036851
This commit allows the encoder to account for additional chroma
plane costs in the mode decision process, if the current block
potentially contains significant color change. It improves the
visual quality at very low bit-rates.
The compression performance of dark720p is improved by 12.39% in
speed 6. For jimred at 150 kbps, the PSNR of V component (red)
increased by 0.2 dB, at the expense of about 5% increase in
encoding time. Note that for sequences where the chroma components
are fairly consistent, the encoding time increase is negligible.
On average the rtc set compression performance is improved by
1.172% in PSNR and 1.920% in SSIM.
Change-Id: Ia55b24ef23a25304f7ec9958fbf07fd6e658505c
In frame parallel decode, libvpx decoder decodes several frames on all
cpus in parallel fashion. If not being flushed, it will only return frame
when all the cpus are busy. If getting flushed, it will return all the
frames in the decoder. Compare with current serial decode mode in which
libvpx decoder is idle between decode calls, libvpx decoder is busy
between decode calls.
Current frame parallel decode will only speed up the decoding for frame
parallel encoded videos. For non frame parallel encoded videos, frame
parallel decode is slower than serial decode due to lack of loopfilter
worker thread.
There are still some known issues that need to be addressed. For example:
decode frame parallel videos with segmentation enabled is not right sometimes.
* frame-parallel:
Add error handling for frame parallel decode and unit test for that.
Fix a bug in frame parallel decode and add a unit test for that.
Add two test vectors to test frame parallel decode.
Add key frame seeking to webmdec and webm_video_source.
Implement frame parallel decode for VP9.
Increase the thread test range to cover 5, 6, 7, 8 threads.
Fix a bug in adding frame parallel unit test.
Add VP9 frame-parallel unit test.
Manually pick "Make the api behavior conform to api spec." from master branch.
Move vp9_dec_build_inter_predictors_* to decoder folder.
Add segmentation map array for current and last frame segmentation.
Include the right header for VP9 worker thread.
Move vp9_thread.* to common.
ctrl_get_reference does not need user_priv.
Seperate the frame buffers from VP9 encoder/decoder structure.
Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:"""
Conflicts:
test/codec_factory.h
test/decode_test_driver.cc
test/decode_test_driver.h
test/invalid_file_test.cc
test/test-data.sha1
test/test.mk
test/test_vectors.cc
vp8/vp8_dx_iface.c
vp9/common/vp9_alloccommon.c
vp9/common/vp9_entropymode.c
vp9/common/vp9_loopfilter_thread.c
vp9/common/vp9_loopfilter_thread.h
vp9/common/vp9_mvref_common.c
vp9/common/vp9_onyxc_int.h
vp9/common/vp9_reconinter.c
vp9/decoder/vp9_decodeframe.c
vp9/decoder/vp9_decodeframe.h
vp9/decoder/vp9_decodemv.c
vp9/decoder/vp9_decoder.c
vp9/decoder/vp9_decoder.h
vp9/encoder/vp9_encoder.c
vp9/encoder/vp9_pickmode.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_cx_iface.c
vp9/vp9_dx_iface.c
This reverts commit a18da9760a.
Change-Id: I361442ffec1586d036ea2e0ee97ce4f077585f02
In frame parallel decode, libvpx decoder decodes several frames on all
cpus in parallel fashion. If not being flushed, it will only return frame
when all the cpus are busy. If getting flushed, it will return all the
frames in the decoder. Compare with current serial decode mode in which
libvpx decoder is idle between decode calls, libvpx decoder is busy
between decode calls. VP9 frame parallel decode is >30% faster than serial
decode with tile parallel threading which will makes devices play 1080P
VP9 videos more easily.
* frame-parallel:
Add error handling for frame parallel decode and unit test for that.
Fix a bug in frame parallel decode and add a unit test for that.
Add two test vectors to test frame parallel decode.
Add key frame seeking to webmdec and webm_video_source.
Implement frame parallel decode for VP9.
Increase the thread test range to cover 5, 6, 7, 8 threads.
Fix a bug in adding frame parallel unit test.
Add VP9 frame-parallel unit test.
Manually pick "Make the api behavior conform to api spec." from master branch.
Move vp9_dec_build_inter_predictors_* to decoder folder.
Add segmentation map array for current and last frame segmentation.
Include the right header for VP9 worker thread.
Move vp9_thread.* to common.
ctrl_get_reference does not need user_priv.
Seperate the frame buffers from VP9 encoder/decoder structure.
Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:"""
Conflicts:
test/codec_factory.h
test/decode_test_driver.cc
test/decode_test_driver.h
test/invalid_file_test.cc
test/test-data.sha1
test/test.mk
test/test_vectors.cc
vp8/vp8_dx_iface.c
vp9/common/vp9_alloccommon.c
vp9/common/vp9_entropymode.c
vp9/common/vp9_loopfilter_thread.c
vp9/common/vp9_loopfilter_thread.h
vp9/common/vp9_mvref_common.c
vp9/common/vp9_onyxc_int.h
vp9/common/vp9_reconinter.c
vp9/decoder/vp9_decodeframe.c
vp9/decoder/vp9_decodeframe.h
vp9/decoder/vp9_decodemv.c
vp9/decoder/vp9_decoder.c
vp9/decoder/vp9_decoder.h
vp9/encoder/vp9_encoder.c
vp9/encoder/vp9_pickmode.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_cx_iface.c
vp9/vp9_dx_iface.c
Change-Id: Ib92eb35851c172d0624970e312ed515054e5ca64
These two parameters are used to control the denoiser cut-off
thresholds. They should be properly initialized when starting
mode search of a given block.
Change-Id: Iba8a25487026a0dbe0d350c347d7e4e4e237b637
Use mbmi->segment_id directly in vp9_pick_inter_mode. The value is
set outside this function, hence no need to assign it again.
Change-Id: I3d63cdd2e4fadf62ccdefada638b00d979eb3741
This commit simplifies the reference motion vector part for sub8x8
block coding in RTC mode and reduces the required local variables.
Change-Id: I470d1482092563b68af22404dc1f497e7457b0a8
This commit enables sub8x8 inter block coding for RTC mode. The
use of sub8x8 blocks can be turned on by allowing
choose_partitioning function to select 4x4/4x8/8x4 block sizes.
Change-Id: Ifbf1fb3888fe4c094fc85158ac3aa89867d8494a
Properly set the corresponding scaling factor of the reference
frame in the non-RD mode decision process. This allows the mode
search process to account for the scaled reference frame when
selecting coding mode.
Change-Id: I9d41bff6931c98e5a82b413e37ac5e6e14b93b23
This commit adds a guard condition to the intra mode test skip
control in RTC coding mode. If all inter modes are skipped, force
the encoder to check intra mode. It avoids situations where the
encoder processes without properly assigning required mode
information.
Change-Id: Ibb349fee997d6584ce901d08b06e8df3ca9c01b1
The alternate reference frame is disabled in non-RD mode. No need
to keep the related entries in the THR_MODES array.
Change-Id: I53386f4bb1c6284f582801f27246c5edf55bc24b
In RTC coding mode, the alternate reference frame modes and compound
inter prediction modes are disabled. This commit reworks the
related mode search threshold update process to skip interacting
with these coding modes. It provides about 1.5% speed-up for speed
-6 on average.
vidyo1
16551 b/f, 40.451 dB, 6261 ms -> 16550 b/f, 40.459 dB, 6190 ms
nik720p
33316 b/f, 38.795 dB, 6335 ms -> 33310 b/f, 38.798 dB, 6237 ms
mmmoving
33265 b/f, 41.055 dB, 7176 ms -> 33267 b/f, 41.064 dB, 7084 ms
dark720
33329 b/f, 39.729 dB, 11235 ms -> 33331 b/f, 39.733 dB, 10731 ms
Change-Id: If2a4090a371cd28f579be219c013b972d7d9b97f
Use a temporary variable to store the transform size associated
with the best intra mode and restore the mode_info if the overall
best mode is intra mode.
Change-Id: I2606e0061ad32f91b095462902b1eb734b128eea
When multiple intra modes are tested, the previous mode info
update process may overwrite the selected best intra mode and make
the final selection use an inter mode. This commit fixes this
issue by moving the mode_info reset outside the intra mode search
loop.
Change-Id: I15ed4288a6b3cb0832104a5e6d5d9a25cd1a5b2b
If vp9_pick_inter_mode works properly, it should at least check
one coding mode and hence get best_tx_size assigned a valid value.
There is no need to initialize best_tx_size with a legitimate
value before starting the mode search.
Change-Id: Ic0496cd89672ea9c2c512a9bd1da952190af9cba
Make the variable reduction_fac log2 based and explicitly use
right shift when computing intra_cost_penalty.
Change-Id: I208f1fb879a02debb3b3fc64f9fd06260dcf1c86
Replace error_resilient flag with use_prev_frame_mvs in
vp9_pick_inter_mode reference motion vector search selection.
This effectively turns off the simplified ref mv search in the
settings of frame resizing, even if error-resilient mode is off.
Change-Id: I7fed814ee7bc0cb419a03b846e0fc2de46ba7686
The initial reset of this_rdc in vp9_pick_inter_mode is not needed,
since it will be re-assign when used.
Change-Id: Ic0e12d741cbab292fc214c1eabb48b129af7839b
Compare the current best mode rate-distortion cost with the skip
threshold to decide if performing motion search.
Change-Id: Ia071824f8dd3b7db485f424692a485a2da6a1a9f
This commit allows the encoder to increase the mode test kick-off
thresholds if the previous best mode renders all zero quantized
coefficients, thereby saving motion search runs when possible.
The compression performance of speed -5 and -6 is down by -0.446%
and 0.591%, respectively. The runtime of speed -6 is improved by
10% for many test clips.
vidyo1, 1000 kbps
16578 b/f, 40.316 dB, 7873 ms -> 16575 b/f, 40.262 dB, 7126 ms
nik720p, 1000 kbps
33311 b/f, 38.651 dB, 7263 ms -> 33304 b/f, 38.629 dB, 6865 ms
dark720p, 1000 kbps
33331 b/f, 39.718 dB, 13596 ms -> 33324 b/f, 39.651 dB, 12000 ms
mmoving, 1000 kbps
33263 b/f, 40.983 dB, 7566 ms -> 33259 b/f, 40.978 dB, 7531 ms
Change-Id: I7591617ff113e91125ec32c9b853e257fbc41d90
This patch modified struct VP9_COMP. Created a struct ThreadData
to include data that need to be copied for each thread. In
multiple thread case, one thread processes one tile. all threads
share one copy of VP9_COMP,
(refer to VP9_COMP *cpi in the code)
but each thread has its own copy of ThreadData,
(refer to ThreadData *td in the code).
Therefore, within the scope of encode_tiles(), both cpi and td
need to be passed as function parameters.
In single thread case, the FRAME_COUNTS pointer in ThreadData
points to "counts" in VP9_COMMON.
Change-Id: Ib37908b2d8e2c0f4f9c18f38017df5ce60e8b13e
The intra mode penalty is covered by intra_cost_penalty. This
commit removes the other intra cost threshold, provided that the
constant 50 is negligible in normal rate-distortion cost.
Change-Id: I9b8b7483c43b9a41741622e7057def1f7d51bb72
This commit makes a non-RD coding mode decision process for key
frame coding. It can be optionally turned on in speed -6 and above.
Change-Id: I0847258b392877a0210b4768bef88ebc9ad009b5
This commit allows more aggressive decision to skip forward
transform and quantization for luma component in RTC coding mode.
The chroma components remains going through the normal coding
routine, since they are not included in the non-RD mode search
process.
It reduces the runtime cost by 2% - 10%. In speed -6,
vidyo1 1000 kbps
16576 b/f, 40.281 dB, 8402 ms -> 16576 b/f, 40.323 dB, 7764 ms
nik720p 1000 kbps
33337 b/f, 38.622 dB, 7473 ms -> 33299 b/f, 38.660 dB, 7314 ms
dark720p 1000 kbps
33330 b/f, 39.785 dB, 13505 ms -> 33325 b/f, 39.714 dB, 13105 ms
The compression performance of speed -6 is improved by 0.44% in
PSNR and 1.31% in SSIM.
Change-Id: Iae9e3738de6255babea734e5897f29118bebc6d7
This commit adds a check condition to the prediction buffering
operation used in the rtc coding mode. This resolves a unit test
warning in example/vpx_tsvc_encoder_vp9_mode_7.
Change-Id: I9fd50d5956948b73b53bd8fc5a16ee66aff61995
This commit makes the speed -6 and above use the reconstructed
boundary pixels for precise intra prediction. This allows more
intra prediction modes to be tested in the non-RD coding process.
Enabling horizontal and vertical intra prediction modes can
improve the speed -6 compression performance for rtc set
by 0.331%.
Change-Id: I3a99f9d12c6af54de2bdbf28c76eab8e0905f744
This commit makes the RTC coding mode to conditionally skip the
reference frame mode search, when the predicted motion vector of
the current reference frame gives more than two times sum of
absolute difference compared to that of other reference frames.
It reduces the runtim by 1% - 4% for speed -5 and -6. The average
compression performance is improved by about 0.1% in both settings.
It is of particular benefit to light change scenarios. The
compression performance of test clip mmmovingvga.y4m is improved by
6.39% and 15.69% at high bit rates for speed -5 and -6, respectively.
Speed -5
vidyo1 16555 b/f, 40.818 dB, 12422 ms ->
16552 b/f, 40.804 dB, 12100 ms
nik 33211 b/f, 39.138 dB, 11341 ms ->
33228 b/f, 39.139 dB, 11023 ms
mmmoving 33263 b/f, 40.935 dB, 13508 ms ->
33256 b/f, 41.068 dB, 12861 ms
Speed -6
vidyo1 16541 b/f, 40.227 dB, 8437 ms ->
16540 b/f, 40.220 dB, 8216 ms
nik 33272 b/f, 38.399 dB, 7610 ms ->
33267 b/f, 38.414 dB, 7490 ms
mmmoving 33255 b/f, 40.555 dB, 7523 ms ->
33257 b/f, 40.975 dB, 7493 ms
Change-Id: Id2aef76ef74a3cba5e9a82a83b792144948c6a91
This commit makes the inter prediction buffer system to support
hybrid partition search. It reduces the runtime of speed -5 by
about 3%. No compression performance change.
vidyo1 720p 1000 kbps
11831 ms -> 11497 ms
nik 720p 1000 kbps
10919 ms -> 10645 ms
Change-Id: I5b2da747c6395c253cd074d3907f5402e1840c36
This commit changes to allow the usage of golden reference frame in
VP9 CBR mode to improve quality. VP9 supports potentially up to 8
reference buffers, it has reference buffers available for this
purpose. This was not possible in VP8 as golden and alt-ref buffers
were used for temporal scalability purpose in CBR mode in WebRTC.
For frames that update golden frame, there can be a quality boost.
The amount of allowed bitrate boost can be controlled via parameter
rc_max_inter_bitrate_pct. The inital value of the boost ratior is
currently based on over_shoot_pct. Further experiments will work
out the adaption of this boost value.
Change-Id: I0c5f010c8fd8b7b598f69779c1b30e5b2ac30a4d
The initialization of this_mode_pred does not work when the ref_frame
loop ever goes beyond LAST_FRAME. This commit fixes the subtle issue
and allows potentially expanding the loop to test GOLDEN_FRAME.
Change-Id: Ibbd427a22160d1d9eacb8ed0c87f88d6cef9c0f3
Using 4 threads, frame parallel decode is ~3x faster than single thread
decode and around 30% faster than tile parallel decode for frame parallel
encoded video on both Android and desktop with 4 threads. Decode speed is
scalable to threads too which means decode could be even faster with more threads.
Change-Id: Ia0a549aaa3e83b5a17b31d8299aa496ea4f21e3e
This commit refactors the rate distortion structure used in the
non-RD coding mode and saves a few RDCOST calculations.
Change-Id: I62c3416c300d2c5372f21b96d93a6b633a34ab3a
Reduce the intra_cost_penalty for non-rd mode,
and some updates to VAR_BASED_PARTITION.
Visual tests show some improvement at Speed 6, for RTC clips.
Change-Id: If9090daf7aed14906a32d931a538ab544bbca606
- Some fixes to surface fit.
- Returns variance function as cost rather than sad in the
pattern search and diamond search functions. Only
vp9_pattern_search_sad function used in bigdia search
uses sad as integer 1-away costs.
- Deploys SUBPEL_TREE_PRUNED_MORE for speed 4+.
Results:
derf [Speed 3]: About +0.036% in coding efficiency without any
discernible speed loss.
derf [Speed 4]: About 2-3% faster at -0.199% loss in coding efficiency.
derf [Speed 5]: About 3-4% faster at -0.149% loss in coding efficiency.
Change-Id: I8462f94f6adb46966ca964f2bd0400977357fd63
The concept:
There's too much noise in source pixels for variance and at low bitrate
the reconstructed looks nothing like the source so we have problems
getting good partitionings with either. This skirts the issue by using
a box blur scaled down version for variance calculations. To compare
against source_var_ moved keyframe to be rd based like source_var.
Change-Id: Ie3babdbfadae324b7b5a76bea192893af27f0624
