The encoder initialization is called in EncodeFrame(). Therefore,
in the unit tests, the set control is done when video->frame() is 1.
This didn't cause problem since current tests mainly test lag_frame
> 0 case, or no encoding option that needs to allocate memory before
1st frame is used. If use lag_frame = 0 and encoding multiple tiles,
the unit tests crash. The issue is fixed by doing the initialization
before encoding frames.
Change-Id: I43102048f88448bcf27e9c60e0ec06c176b02e5c
Add vp9_iht8x8_add_neon.c
- vp9_iht8x8_64_add_neon
The assembly did not previously implement tx_type 0
BUG=716
Change-Id: Icfc99dd24f3d59047f9184a7d0c761ba7e3de934
Signed-off-by: James Yu <james.yu@linaro.org>
Add vp9_iht4x4_add_neon.c
- vp9_iht4x4_16_add_neon
The assembly did not previously implement tx_type 0
BUG=715
Change-Id: I60034d1568de034edba45c5cdd13f3d87dbc73b6
Signed-off-by: James Yu <james.yu@linaro.org>
Fails to compile. Bad calls to vp9_alloc_frame_buffer
and vp9_realloc_frame_buffer in postproc.c
This reverts commit 399823b6f5.
Change-Id: I29f0e173f8e185d3a303cfdb17813e1eccb51e3a
Add support for setting byte alignment on the Y, U, and V plane of the
reference buffers. The byte alignment must be a power of 2, from 32 to
1024. A value of 0 sets legacy alignment.
Change-Id: I7c1399622f7aa68e123646369216b32047dda73d
Assembly tests should clear system state, as we have no
expectation of proper system state in between test runs..
Change-Id: I0f591996c1f17ef2a5a8572a6b445f757223a144
This allows us to track decode speed for new encodes so that we catch
problems like an encode change that makes decode really slow.
Change-Id: I92251a8b1f710b241f66e1042413df1b71b76038
Adds decoder config as a changeable parameter to unit tests, and
changes end to end test to use commonly used parameters to enable
base test of tiles encoding and frame parallel decoding.
Change-Id: I5d23a6857303b4d68b92b15c3f2f04a1bcb4c2bb
the gtest implementation used only returns values between 0 and 2^31-1
+ temporarily disable some tests in fdct8x8_test which misbehave with the
new range
Change-Id: I45381076f0bea3317cc6728305890e4fd2f2facd
the gtest implementation used only returns values between 0 and 2^31-1
+ temporarily disable some tests in lpf_8_test which misbehave with the
new range
Change-Id: I8a026680c4b8c12dc14d4f24c33edb2315963114
For key frame at speed 6: enable the non-rd mode selection in speed setting
and use the (non-rd) variance_based partition.
Adjust some logic/thresholds in variance partition selection for key frame only (no change to delta frames),
mainly to bias to selecting smaller prediction blocks, and also set max tx size of 16x16.
Loss in key frame quality (~0.6-0.7dB) compared to rd coding,
but speeds up key frame encoding by at least 6x.
Average PNSR/SSIM metrics over RTC clips go down by ~1-2% for speed 6.
Change-Id: Ie4845e0127e876337b9c105aa37e93b286193405
Also removes some spurious changes in common/vp9_blockd.h which
was introduced by a rebase issue between nextgen and master branches.
Change-Id: If359f0e9a71bca9c2ba685a87a355873536bb282
(cherry picked from commit 005d80cd05)
(cherry picked from commit 08d2f54800)
(cherry picked from commit 4230c2306c)
This commit makes the codec automatically turn on error resilient
mode when using real-time mode for temporal scalable coding. It
fixes an enc/dec mismatch issue and re-enables the corresponding
unit test.
Change-Id: Ie1f7134e9a78ddd43e9b1555b3ee991c8a3afd0d
A hidden enc/dec mismatch bug was accidentally triggered by
https://gerrit.chromium.org/gerrit/#/c/72247/
Adaptively adjust mode test kick-off thresholds in RTC coding
This commit temporarily turns off the broken unit tests to avoid
blocking other CLs while fixing.
Change-Id: I0a0f195030321190ce10879cd833187680576367
previously 'bit_depth_', which is later used to calculate 'mask_', would
be left uninitialized in non-high-bitdepth builds
Change-Id: Ia72035f4645baf3bb0f191504f491b934cdf1e0e
By using 0xff for a short it was not setting the high bits. When
comparing the output with vtst to find non-zero elements it was skipping
vaules which had no low bits set such as -512 / 0xFE00.
Using -8191 as the first element of coeff will generate this condition.
BUG=883
Change-Id: Ia1e10fb809d1e7866f28c56769fe703e6231a657
this was incorrectly set in test.mk by
93ffd37 Enable and fix resize_test for VP9
the test is now available when using --disable-vp9
Change-Id: I6acf44b0de647b34812ef5e18fd96447cdf9b25d
worker hooks return false on error, fix the assignment in Execute() used
in the TestSerialInterface test
Change-Id: I93c2e45f270330ae6d35a3a303411c4ee0f31337
A flush bug is discovered during putting frame parallel decoder
into Android. This test will expose that bug.
Change-Id: Ia047f27972f4da0471649f79f1f91e7695297473
This reverts commit 7d07f512cd.
this breaks visual studio builds:
'#' : invalid character : possibly the result of a macro expansion
Change-Id: I77170d549afb71e75a878fa0f6acd204fe8d9e67
The obj_int_extract code is no longer worth maintaining. It creates
significant issues when adapting for different build systems and no
longer offers as significant of a performance benefit due to
improvements in intrinsics.
Source files will remain until the various third-party builds are updated.
The neon fast quantizer has been moved to intrinsics. The armv6 version
has been removed because so few remaining targets require it.
Compilers and processors have improved significantly since the
pack_tokens code was written. The assembly is no longer faster than the
C code.
pack_tokens were the only optimizations for the armv5te targets so the targets
will be removed after the test infrastructure has been updated.
BUG=710
Change-Id: Ic785b167cd9f95eeff31c7c76b7b736c07fb30eb
This patch was to fix the vpxdec fuzzing3 test failure. When an
error occurs, setjmp() is invoked, which calls the decoder
removing routine. In multiple thread situation, other threads
could try to access the frame context memory that is already
deallocated, thus causing a segfault.
An invalid unit test was added for this issue.
Change-Id: Ida7442154f3d89759483f0f4fe0324041fffb952
The test filter is not a prefix matcher. It requires test type to
contain no more than the optimization type. In this example, SSSE3_64
fails to match and the test is not skipped even when SSSE3 is not
available.
Change-Id: Ia74229a167c88da4e6da169012a7a77d438c3f75
In the function mb_lpf_horizontal_edge_w_avx2_16 the usage of the intrinsic
_mm256_cvtepu8_epi16 cause a compiler bug in gcc 4.9.1.
until it will be fixed I created a workaround that create the up convert by
using broadcast128+shuffle.
The bug was reported here:
https://code.google.com/p/webm/issues/detail?id=867
Change-Id: I73452e6806f42e0fadcde96b804ea3afa7eeb351
All sad function that process above 32 consecutive elements are optimized
for AVX2:
vp9_sad64x64
vp9_sad64x32
vp9_sad32x64
vp9_sad32x32
vp9_sad32x16
vp9_sad64x64_avg
vp9_sad64x32_avg
vp9_sad32x64_avg
vp9_sad32x32_avg
vp9_sad32x16_avg
The functions that appeared as a hotspot is vp9_sad32x32 and vp9_sad64x64
vp9_sad32x32 was optimized by 68% and vp9_sad64x64 was optimized by 90%
both of them gave and overall ~2.3% user level gain
Change-Id: Iccf86b375a2b54c5fbbe685902ead0c9a561b9fd
Covers all profiles and input formats. The tests check if the
encode succeeds and if the psnr is sane.
Change-Id: I195a5330debf92562846121819b6eaf961e27c01
We encode a empty invisible frame in front of the base layer frame to
avoid using prev_mi. Since there's a restriction for reference frame
scaling factor, we have to make it smaller and smaller gradually until
its size is 16x16.
Change remerged.
Change-Id: I9efab38bba7da86e056fbe8f663e711c5df38449
We encode a empty invisible frame in front of the base layer frame to
avoid using prev_mi. Since there's a restriction for reference frame
scaling factor, we have to make it smaller and smaller gradually until
its size is 16x16.
Change-Id: I60b680314e33a60b4093cafc296465ee18169c19
Add a test vector to show the cases where segmentation map is preserved
from frome to frame as outlined in the inquiry in issue 761.
Change-Id: I630c6aba27d0d0b109cc7fd7c6fcd008222a0cf3
The concept:
There's too much noise in source pixels for variance and at low bitrate
the reconstructed looks nothing like the source so we have problems
getting good partitionings with either. This skirts the issue by using
a box blur scaled down version for variance calculations. To compare
against source_var_ moved keyframe to be rd based like source_var.
Change-Id: Ie3babdbfadae324b7b5a76bea192893af27f0624
This SSE2 is based on VP8 denoiser's SSE2 code. In VP8, there are
only 16x16 blocks in denoiser, while in VP9, there are 13 different
block sizes.
By adding this SSE2 code, the improvement of encoder speed is around
20%(using C code vs using SSE2 code), vary for different clips.
The unit test for VP9 denoiser is to confirm that the SSE2 code is
bit-exact with the C code. The unit test covers all block size.
Change-Id: Ic8d8ac26db4ea40a5f146b5678a065af07eaaa3d
Incorporates the WRAPLOW macro into the non-highbitdepth transforms
to aid hardware verification between a software C model and an
intended hardware implementation though the use of the configure
options: --enable-experimental --enable-emulate-hardware.
Note that to avoid further discrepancies between the sse/sse2
implementations of the transforms and the C implementation, when the
emulate hardware option is invoked, we also disable sse/sse2/etc.
Also incudes some minor cleanups/renaming etc.
Change-Id: Ib864d8493313927d429cce402982f1c8e45b3287
vpx_svc_parameters_t contains id, resolution and min/max qp for each spatial layer.
In this change we will use extra config to send min/max qp and scaling factors, then calculate layer resolution inside encoder.
Change-Id: Ib673303266605fe803c3b067284aae5f7a25514a
In many tests in VP8, the denoiser is disabled. By adding this
conditional comilation macro, the unit test will not be included
when denoiser is not enabled.
Change-Id: I6edec85c996acca22aacd11161c52408be2660a3
1. This is to align with the ffmpeg implementation
2. Remove APIs for setting quantizers and scale-factors
Change-Id: I6e238d71db790a9fb3254baaeb61e2a5aac58f48
Libvpx was memseting every external frame buffer before decode. This
was to work around a valgrind issue in our C loop filter. Most of
the time this was not needed and we have noticed some significant
performance loss on some platforms. Now we require the application to
zero out the buffers if it is using external frame buffers.
Change-Id: I7330d00a315e65137ed30edd5f813e8929b76242
Adds various high bitdepth transform functions and tests.
Much of the changes are related to using typedefs tran_low_t
and tran_high_t for the final transform cofficients and intermediate
stages of the transform computation respectively rather than fixed
types int16_t/int. When vp9_highbitdepth configure flag is off,
these map tp int16_t/int32_t, but when the flag is on, they map
to int32_t/int64_t to make space for needed extra precision.
Change-Id: I3c56de79e15b904d6f655b62ffae170729befdd8
If optimizations use more than one cpu feature, allow
specifying them so that '--disable-X' still works
https://code.google.com/p/webm/issues/detail?id=854
Change-Id: I3108ea37b397371a2be84dd5f2380b304db23f18
1. svc_encodeframe.c will not handle frame or stats packets anymore.
The app will process them.
2. Remove APIs that related to these packets.
Change-Id: Id0d7f8b458dc09c6f77064c0878fd4e572db001b
don't bother decoding any further after receiving an earlier decode
error until a key/intra-only frame is encountered.
Change-Id: I381917b70d7a9e6f8d6de42e3d181bb113a4cec4
allocations within vp9_alloc_context_buffers() rely on mi_rows/mi_cols
individually, use those to determine whether to realloc rather than
stride and stride * rows. this fixes a crash with some fuzzed files for
invalid accesses into last_frame_seg_map and above_context.
Change-Id: I7b9f40dcf170d443890f3bd2acd285507943c7d4
proceeding using a corrupt (incompletely decoded) frame reference may
lead to incorrect assumptions about allocation sizes leading to a crash.
Change-Id: I76e74f2e1be127c2e2c7e1174bb3307497dfd23d
Calling Reset(int) method instead of overloaded operator()(int).
Adding underscore at the end of class member name.
Change-Id: I01934e7bc056d4b594e5d05d693328febd34ac3c
vp8_build_intra_predictors_mbuv_s().
This patch replaces the assembly version with an intrinsic
version.
On a Nexus 7, vpxenc (in realtime mode, speed -12)
reported a performance improvement of ~2.6%.
Change-Id: I9ef65bad929450c0215253fdae1c16c8b4a8f26f
Adds config parameter vp9_highbitdepth, to support highbitdepth profiles.
Also includes most vpx level high bit-depth functions. However
encode/decode in the highbitdepth profiles will not work until
the rest of the code is in place.
Change-Id: I34c53b253c38873611057a6cbc89a1361b8985a6
It's built based on current spatial svc code.
We only support one spatial two temporal layers at this time.
Change-Id: I1fdc8584354b910331e626bfae60473b3b701ba1
store the number of allocated rows in VP9LfSync, the calculated values
can not be relied on when dealing with corrupt material.
Change-Id: I13b8bcec9738c299a71df726772ab7ac05511e5b
attempting to decode a frame after the previous frame failed has the
potential of interrupting an earlier loop filter task
Change-Id: I6f2b1ddcdf5b89c3e2ee8caf5289dada2a087d66
if the first frame was corrupt and loop filter not called, the next call
would assume the necessary allocations had been done and segfault when
accessing a NULL pointer
Change-Id: Ib6ef505e5c594e6f0fe65ab0700172bcf06b92a6
We can use one frame context for each layer so that we don't have
to reset the probs every frame. But we can't use prev_mi since we
may drop enhancement layers. So we have to generate a non vp9
compatible bitstream and modify it in the player.
1. We need to code all frames as invisible frame to let prev_mi
not to be used. But in the bitstream we need to code the
show_frame flag to 1 so that the publisher will know it's
supposed to be a visible frame.
2. In the player we need to change the show_frame flag to 0 for
all frames. Then add an one byte frame into the super frame
to tell the decoder which layer we want to show.
Change-Id: I75b7304cf31f0ab952f043e33c034495e88f01f3
1. Clean the code for encode frame tests
2. Add encode w/ and w/o alt reference frame test
3. Add encode SNR layers test
4. Add encode multiple layers but decode partial layers test
Change-Id: Ibd2c9bc02525db584a6f931a98405f2d851b3cd6
There are two CreateDecoder functions and decode_test_driver is not
calling the right function now. This bug is discovered during really
enable the frame parallel flag inside libvpx. This bug does not affect
any existing unit test though.
Change-Id: Icd9633c4b66d50e422a09c4310ff791082878936
- Fix nit: make test function definitions match test order.
- Fix nit: use elog instead of echo for env verification error.
Change-Id: I0eec078fc056a5bb2bd88d5833e43de48d77ec08
this test allocates >2GB currently. depending on the order of the test
runs the allocation may fail most regularly with mingw+wine.
Change-Id: Ibee1c18cfbe29a4de6c65075647ec3955d8206c0
- Remove vpxdec and vpxenc from the exclude list.
- vpx{dec,enc}.sh: Updates to support finding their executable when
LIBVPX_BIN_PATH is setup for the examples.
- tools_common.sh: New library function, vpx_tool_path(). Provides
support for finding the exectuables in vpx{dec,enc}.sh.
Change-Id: I730f11cceb44646491a7a7ff58603a4a760129ef
Explicitly makes the fileptr null when close source is called
on a temporary file. This avoids a valgrind error.
Change-Id: I9c364290eeb6842fde946dd9bf817814c7178aaa
Make sure VP9 frame-parallel decode passes all the standard
test vectors. Only test running with 2,3,4 threads now.
Also refactor the video decode test driver to support passing
in decode flags which is used to enable frame-parallel decode.
Change-Id: I6a712464232c2e13681634951c7e176312522e1e
check that bitrates increase with cqlevel at global test case teardown,
rather than after each individual test case. this allows the tests to be
run out of order with --gtest_shuffle.
Change-Id: I9e0d4e6a2d920a1f2fe9aee7b7876a3e7eb5d297
