Fix bug in setting this flag for animated content.
The bug did cause quality to increase because far
more frames are not boosted than boosted.
However, the speed trade off to gain is a lot less
favorable and the behavior was not as intended.
Change-Id: I89fb70419c88b26f40b3534de0481730a1b3fcfa
Changes to allow more use of rectangular partitions at
speeds 1 and 2 for content classed by the first pass as
animation and for blocks near the active image edge.
This has quite a big impact in quality for the animated
test sequence but also hurts encode speed for speed 2.
For other content types the impact on both speed and
quality is small.
Added some plumbing for detection of internal vertical
image edges.
Change-Id: I3fc48de2349f8cb87946caaf0b06dbb0ea261a9a
Change speed features / behavior for split mode when there
is an internal active edge (e.g. formatting bars).
Remove some threshold constraints in rd code near the active
edge of the image.
Add some plumbing for left and right active edge detection.
Patch set 5. Limit rd pass through for sub 8x8 to internal active edges.
This takes away any speed penalty for most clips but keeps the enhanced
edge coding for the more critical case of internal image edges
Change-Id: If644e4762874de4fe9cbb0a66211953fa74c13a5
For content that is identified as likely to contain some
animation or graphics content, increase the availability
of split modes for good quality speeds 1-3.
On a problem test animation clip this improves metrics
results by about 0.25 db and makes a noticeable difference
visually. It also causes a small drop in file size (~0.5%) but
a rise in encode time of about 5-6% at speed 2.
For more normal content it should have no effect.
Change-Id: Ic4cd9a8de065af9f9402f4477a17442aebf0e439
Adds code to detect dead zone bars at the top and bottom
of reformatted letterbox video (note that the code only
looks at the top of the image and assumes any dead zone
is symmetrical). Use of this to adapt rate control etc.
will follow in a subsequent patch.
Also counts other blocks (excluding the dead zone) that
have no intra signal. The presence of a significant
number of such blocks can be used as a identify that the frame
may be artificial (e.g. animation, screen capture, graphics).
This patch contains plumbing only and does not use
the signal.
Change-Id: I59bc93529cd4065416cef773e405fda3ae006a20
Use the same settting as in speed >=6.
This will use same logic for tx_size selecton as in speed >=6,
which limits the transform size and reduces ringing artifact.
Also metrics go up on average with this change: ~2% for PSNR, ~10% for SSIM.
Change-Id: Ia2d50db236ae1cc72f742bfa6c9ec5ea50ff0e0a
For non-rd mode (speed >=5): use mask based on prediction block size, and
(for non-screen content mode) allow for checking horiz and vert intra modes
for blocks sizes < 16x16.
Avg psnr/ssim metrics go up by about ~0.2%.
Only allowing H/V intra on block sizes below 16x16 for now, to keep
encoding time increase very small, and also when allowing H/V on 16x16 blocks,
metrics went down on a few clips which need to be further examined.
Change-Id: I8ae0bc8cb2a964f9709612c76c5661acaab1381e
Impose a limit on the rd auto partition search based on
the image format. Smaller formats require that the search
includes includes a smaller minimum block size.
This change is intended to mitigate the visual impact of
ringing in some problem clips, for smaller image formats.
Change-Id: Ie039e5f599ee079bbef5d272f3e40e2e27d8f97b
Remove one of the auto partition size cases.
This case can behaves badly in some types of animated content
and was only used for the rd encode path. A subsequent patch
will add additional checks to help further improve visual quality.
Change-Id: I0ebd8da3d45ab8501afa45d7959ced8c2d60ee4e
Metrics on RTC set go down by ~1.5% on average.
Key frame encoding time goes down by factor of ~5.
Change-Id: Ia83acc55848613870e5ac6efe7f3d904d877febb
Note: This feature is still in development.
Add an option for the encoder to decide the resolution
at which to encode each frame.
Each KF/GF/ARF goup is tested to see if it would be
better encoded at a lower resolution. At present, each
KF/GF/ARF is coded first at full-size and if the coded
size exceeds a threshold (twice target data rate) at
the maximum active Q then the entire group is encoded
at lower resolution.
This feature is enabled in vpxenc by setting:
--resize-allowed=1
In addition, if the vpxenc command line also specifies
valid frame dimensions using:
--resize-width=XXXX & --resize_height=YYYY
then *all* frames will be encoded at this resolution.
Change-Id: I13f341e0a82512f9e84e144e0f3b5aed8a65402b
1. Adjusted the threshold for coef update computation based on counts
of tx used, avoid coef update computation when count is low (<20)
2. Move sf->lpf_pick = LPF_PICK_MINIMAL_LPF to speed 8.
Change-Id: I02b44309e40fcdbf135c7934ae067a3f42502d30
This commit removes undefined value options of cpu-used for VP9 and
changed vpxenc prompt to reflect the usable range of [-8,8]
Change-Id: Ib80fef3dbb6ec9aabac45ed13e8ab6fbaf94f55e
These speed-up features for key frame coding are only turned on
in the settings of hybrid non-RD and RD mode decision. It provides
about 20% speed-up to the hybrid key frame coding at the expense
of certain compression performance loss. For vidyo1, the key frame
coding statistics are changed
9838F, 35.020 dB, 61677 us -> 9920F, 34.834 dB, 47556 us
Overall rtc set compression performance is down by -0.257%.
Change-Id: I0025447fda26bb7855e982955642b5f55d71b51f
When block size is below 16x16, the encoder swap from non-RD to
RD mode for key frame coding. This largely brough back the key
frame compression performance. For vidyo1 at 1000 kbps, the key
frame coding statistics are changed
9978F, 34.183 dB, 36807 us -> 9838F, 35.020 dB, 61677 us
As compared to the full RD case
7187F, 34.930 dB, 214470 us
The overall rtc set coding performance (single key frame setting)
is improved by 1.5%.
Change-Id: I78a4ecf025d7b24ec911e85be94e01da05e77878
For key frame at speed 6: enable the non-rd mode selection in speed setting
and use the (non-rd) variance_based partition.
Adjust some logic/thresholds in variance partition selection for key frame only (no change to delta frames),
mainly to bias to selecting smaller prediction blocks, and also set max tx size of 16x16.
Loss in key frame quality (~0.6-0.7dB) compared to rd coding,
but speeds up key frame encoding by at least 6x.
Average PNSR/SSIM metrics over RTC clips go down by ~1-2% for speed 6.
Change-Id: Ie4845e0127e876337b9c105aa37e93b286193405
This commit reworks the ONE_LOOP_REDUCED coefficient probability
model update process. It allows model update for every coefficient
across the spectrum at a coarser resolution, instead of performing
precise update only for certain subset of probability models.
The overall runtime remains nearly same (<1% change) for speed -6.
The compression performance is improved by 7.5% in PSNR for speed
-5 and 4.57% for speed -6, respectively.
Change-Id: Ifb17136382ee7e39a9f34ff4a4f09a753125c8d1
This patch modified struct VP9_COMP. Created a struct ThreadData
to include data that need to be copied for each thread. In
multiple thread case, one thread processes one tile. all threads
share one copy of VP9_COMP,
(refer to VP9_COMP *cpi in the code)
but each thread has its own copy of ThreadData,
(refer to ThreadData *td in the code).
Therefore, within the scope of encode_tiles(), both cpi and td
need to be passed as function parameters.
In single thread case, the FRAME_COUNTS pointer in ThreadData
points to "counts" in VP9_COMMON.
Change-Id: Ib37908b2d8e2c0f4f9c18f38017df5ce60e8b13e
This commit makes a non-RD coding mode decision process for key
frame coding. It can be optionally turned on in speed -6 and above.
Change-Id: I0847258b392877a0210b4768bef88ebc9ad009b5
The max_partition_size and max_partition_size are set at the
beginning while setting speed features, and then adjusted at
SB level. Moving them to mb struct ensures there is a local
copy for each thread.
Change-Id: I7dd08dc918d9f772fcd718bbd6533e0787720ad4
The function pointer in compressor instance does not change, so this
commit changes to call the function directly.
Change-Id: I9c9c460e3475711c384b74c9842f0b4f3d037cc5
Modified VP9_COMP struct to include MACROBLOCK *mb. This change
makes it feasible in multi-thread case to allocate a mb for each
thread.
Change-Id: I624d6d1aa9c132362200753e5d90b581b1738d6e
Prepare for the introduction of frame-size change
logic into the recode loop.
Separated the speed dependent features into
separate static and dynamic parts, the latter being
those features that are dependent on the frame size.
Change-Id: Ia693e28c5cf069a1a7bf12e49ecf83e440e1d313
This commit makes the speed -6 and above use the reconstructed
boundary pixels for precise intra prediction. This allows more
intra prediction modes to be tested in the non-RD coding process.
Enabling horizontal and vertical intra prediction modes can
improve the speed -6 compression performance for rtc set
by 0.331%.
Change-Id: I3a99f9d12c6af54de2bdbf28c76eab8e0905f744
A recent change has introduced big quality drops for speed 7 and 12
for --rt mode. The change reverted the big drop and improved quality
by 9.5% for speed 7 and 13.4% for speed 12.
Change-Id: I07b82e3bb6002a73af486a083458c88877bdad01
The existing speed features produce horrible encoding results, almost
30% worse than cpu-used=4, this commit adjust the speed features to
produce relatively resonable results to be within 3%-5% of cpu-used=4.
Change-Id: I0ca6ebafb33024d4a0cbcf04c78a4a00b8dd1ecf
Its functionality has been replaced with choose_partitioning and
threshold based control on split mode check.
Change-Id: Ic9bb321df06b524f5c38ea5874dc6f6a8f93c5e3
This speed feature has been deprecated in both yt and rtc coding
modes. This commit removes the related operations.
Change-Id: I079c79c6adafe45581af2ebf8b98faebcface1ce
This commit re-designs the recursive partition search scheme in
rtc speed -5. It first checks if the current block is under cyclic
refresh mode. If so, apply recursive partition search. Otherwise,
perform sub-sampled pixel based partition selection. When the
pre-selection finds the partition size should be 32x32 or above,
use the partition size directly. Otherwise, apply partition search
at nearby levels around the preset partition size.
It is enabled in speed -5. The compression performance of rtc
speed -5 is improved by 9.4%. Speed wise, the run-time goes slower
from 1% to 10%.
nik_720p, 1000 kbps
33220 b/f, 38.977 dB, 10109 ms -> 33200 b/f, 39.119 dB, 10210 ms
vidyo1_720p, 1000 kbps
16536 b/f, 40.495 dB, 10119 ms -> 16536 b/f, 40.827 dB, 11287 ms
Change-Id: I65adba352e3adc03bae50854ddaea1b421653c6c
Compare the estimated rate and distortion to the thresholds scaled
according to the operating block size and determine if further
split partition search will be run. The compression performance of
speed -5 is changed by -0.074%. The encoding speed is 10% - 15%
faster.
vidyo1 720p
16545 b/f, 40.492 dB, 11475 ms -> 16535 b/f, 40.486 dB, 10100 ms
nik720p
16624 b/f, 36.310 dB, 10071 ms -> 16617 b/f, 36.313 dB, 8346 ms
Change-Id: Ic9197ab5761279ae55d2fb7813b2af0e0db497b8
This commit replaces the use of copy_partitioning with
choose_partitioning based on the sse of subsamped pixels, which
provides significantly better coding performance and runs at
similar speed, as compared to copy_partitioning. It improves rtc
speed 5 coding performance by 3%.
Change-Id: I52d3682a12dce0147f5e52383a594fc242ca3228
- Some fixes to surface fit.
- Returns variance function as cost rather than sad in the
pattern search and diamond search functions. Only
vp9_pattern_search_sad function used in bigdia search
uses sad as integer 1-away costs.
- Deploys SUBPEL_TREE_PRUNED_MORE for speed 4+.
Results:
derf [Speed 3]: About +0.036% in coding efficiency without any
discernible speed loss.
derf [Speed 4]: About 2-3% faster at -0.199% loss in coding efficiency.
derf [Speed 5]: About 3-4% faster at -0.149% loss in coding efficiency.
Change-Id: I8462f94f6adb46966ca964f2bd0400977357fd63
In model_rd_for_sb function, the spatial domain SSE and variance
are checked to see if transform coefficients are quantized to 0.
Besides that, this patch adds another set of thresholds that are
much more strict. These thresholds are used to conduct a partition
block level check to measure if all its TX blocks are skippable
for YUV planes. If it is true, x->skip is set for this partition
block, and thus its mode search is terminated.
This speeds up the encoding at very low prediction error case,
such as screen sharing application. This patch covers what
rd_encode_breakout_test() does, so that function is removed.
Borg test at speed 3 shows:
For stdhd set, psnr: +0.008%, ssim: +0.014%;
For derf set, psnr: +0.018%, ssim: +0.025%.
No noticeable speed change.
Change-Id: I4e5f15cf10016a282a68e35175ff854b28195944
The concept:
There's too much noise in source pixels for variance and at low bitrate
the reconstructed looks nothing like the source so we have problems
getting good partitionings with either. This skirts the issue by using
a box blur scaled down version for variance calculations. To compare
against source_var_ moved keyframe to be rd based like source_var.
Change-Id: Ie3babdbfadae324b7b5a76bea192893af27f0624
