Assign the pointer to mode_info stream per tile. Remove the use of
tile_col in the decoding modules.
Change-Id: I7df87086708a3d92c5e20e86bcfb04e458ff47a6
This move is done to have all compressed header reading functions in one
place. Moved functions:
read_switchable_interp_probs
read_inter_mode_probs
read_comp_pred_mode
read_comp_pred
update_mv
read_mv_probs
Change-Id: I2aebb57d2826d03d11bf2f8fbbfc3a9978c4f9fb
The ref's scale_factors are set at frame level, and then copied for
each partition block. Since the struct members are mostly constant,
this patch separated the constant and non-constant members, and
reduced struct copying. This gave 0.5% ~ 1.4% decoder speed gain.
Change-Id: I94043bf5a6995c8042da52e5c661818dfa6f6d4c
We used set_partition_seg_context() only before calls to:
1. update_partition_context()
2. partition_plane_context()
Moving these functions from vp9_blockd.h to vp9_onyxc_int.h and
inlining set_partition_seg_context into them. After that it is not
necessary to have {above, left}_seg_context fields in MACROBLOCKD struture,
so removing them also.
Change-Id: I4723f59e1c8f3788432b7f51185d8d747b3a97f9
missed one in vp9_detokenize.c in the last
+ add some asserts in vp9_decode_frame() to catch regressions
Change-Id: Ide67505114ee17efdafb13694aed0c09039e5a16
replace VP9D_COMP usage with the (slightly) more targeted
VP9_COMMON/MACROBLCKD/struct segmentation structures.
Change-Id: Iabb3616e231417b0e17b7e4b384ea63167a81745
That makes decoder and encoder (only bitstream writing part) a little bit
simpler and faster. Moving get_sb_index() function to the encoder.
Change-Id: Ie91aaeefd69c84b085948267b33556a7666c6278
The only case where they were intentionally pointing to different
structures was in mbgraph, and this didn't have the expected behavior
because both of these pointers are used interchangeably through the code
Change-Id: I979251782f90885fe962305bcc845bc05907f80c
Updated the encoder to handle frames that are coded
intra-only. Intra-only frames must be non-showable,
that is, the "show frame" flag must be set to 0 in
the frame header.
Tested by forcing the ARF frames to be coded intra-
only.
Note: The rate control code will need to be modified
to account for intra-only frames better than they
are currently handled.
Change-Id: I6a9dd5337deddcecc599d3a44a7431909ed21079
Values of MODE_UPDATE_PROB and VP9_COEF_UPDATE_PROB are equal, so replacing
them with one constant. Inlining appropriate arguments for functions:
vp9_cond_prob_diff_update (encoder)
vp9_diff_update_prob (decoder)
Change-Id: I1255a1cb477743b799b3bfbbcd8de6b32b067338
The idea is to have the following names for each transform size:
vp9_idct4x4_add
vp9_idct4x4_1_add
vp9_idct4x4_10_add
vp9_idct4x4_16_add
vp9_idct8x8_add
vp9_idct8x8_1_add
vp9_idct8x8_10_add
vp9_idct8x8_64_add
etc for 16x16, 32x32
The actual list of renames in this patch:
vp9_idct_add_lossless -> vp9_iwht4x4_add
vp9_short_iwalsh4x4_add -> vp9_iwht4x4_16_add
vp9_short_iwalsh4x4_1_add -> vp9_iwht4x4_1_add
vp9_idct_add -> vp9_idct4x4_add
vp9_short_idct4x4_add -> vp9_idct4x4_16_add
vp9_short_idct4x4_1_add -> vp9_idct4x4_1_add
Change-Id: I6f43f7437c68dd30cdd05d72e213765578ed30b1
Moving INTERPOLATIONFILTERTYPE enum and subpix_fn_table struct to
vp9_filter.h. Adding convenient typedef for subpel kernels.
Function vp9_setup_interp_filters() besides setting xd->subpix.filter_x &
xd->subpix.filter_y has a side effect of also setting scale factors. This
is not required inside decode_modes_b() because scale factors have been
already set by set_ref() calls. That's why replacing
vp9_setup_interp_filters() call with newly created vp9_get_filter_kernel()
call. The behavior of vp9_setup_interp_filters() is unchanged (it
is used from the encoder).
Change-Id: I3f36d3f7cd8d15195a6e2fafd1777cdaf9ecb847
Moving functions from vp9_idct_blk to vp9_idct because these functions are
used from both encoder and decoder. Removing duplicated code from
vp9_encodemb.c and reusing existing functions.
Change-Id: Ia0a6782f8c4c409efb891651b871dd4bf22d5fe8
Moving out decode_tokens function calls and adding decode_blocks boolean
variable. We only have to decode if eobtotal > 0, i.e. we have at least one
non-zero coefficient. Also inlining and remove vp9_set_pred_flag_mbskip
function.
Change-Id: I7be38b12ee8206faf0beea2bbf4d52be42575b03
mode_info_context was stored as a grid of MODE_INFO structs.
The grid now constists of pointers to MODE_INFO structs. The
MODE_INFO structs are now stored as a stream (decoder only),
eliminating unnecessary copies and is a little more cache
friendly.
Change-Id: I031d376284c6eb98a38ad5595b797f048a6cfc0d
mode_info_context was stored as a grid of MODE_INFO structs.
The grid now constists of a pointer to a MODE_INFO struct and
a "in the image" flag. The MODE_INFO structs are now stored
as a stream, eliminating unnecessary copies and is a little
more cache friendly.
For the test clips used, the decoder performance improved
by ~4.3% (1080p) and ~9.7% (720p).
Patch Set 2: Re-encoded clips with latest. Now ~1.7% (1080p)
and 5.9% (720p).
Change-Id: I846f29e88610fce2523ca697a9a9ef2a182e9256
Switching from mi_{width, height}_log2 and b_{width, height}_log2 to
num_8x8_blocks_{wide, high} and num_4x4_blocks_{wide, high}. Removing
redundant code, adding const.
Change-Id: Iaab2207590fd24d0b76999071778d1395dc5cd5d
vp9_setup_interp_filters before each inter block decoding, it is not
necessary to call it just before the whole frame decoding.
Change-Id: Id1b0ee62f987474e27eafba0013a4896b492c400
Fix of https://code.google.com/p/webm/issues/detail?id=608. We could have
used invalid display size equal to the previous frame size (not to the
current frame size).
Change-Id: I91b576be5032e47084214052a1990dc51213e2f0
It is possible to have invalid scale factors and not access them
during decoding. Error is reported if we really try to use invalid scale
factors.
Change-Id: Ie532d3ea7325ee0c7a6ada08269f804350c80fdf
Comment is wrong, we don't initialize any xd pointers. We only initialize
xd->planes[i]->dst and xd->planes[i]->pre[], which are actually initialized
for every block during the decoding.
Change-Id: If152ea872ebef1f83ca70712fa6f8df1b6855f56
the final macroblock rows are scheduled in the main thread. prior to
this change one additional macroblock row would be scheduled in the
worker forcing the main thread to wait before finishing.
Change-Id: I05f3168e5c629b898fcebb0d77eb6d6a90d6105e
Updating all foreach_transformed_block_visitor functions to work with
plane block size instead of general block. Removing a lot of duplicated
code.
Change-Id: I6a9069e27528c611f5a648e1da0c5a5fd17f1bb4
This change set is intermediate. The next one will remove all repetitive
plane_bsize calculations, because it will be passed as argument to
foreach_transformed_block_visitor.
Change-Id: Ifc12e0b330e017c6851a28746b3a5460b9bf7f0b
When the frame size changes the last frame segment map must
be resized to match and initialized to 0.
Change-Id: Idc10de109f55dbe9af3a6caae355a2974712243d
VP9_COMMON is the right place to segmentatation struct because it has
global segmentation parameters, not something specific to macroblock
processing.
Change-Id: Ib9ada0c06c253996eb3b5f6cccf6a323fbbba708
Making foreach_transformed_block_in_plane more clear (it's not finished
yet). Using explicit tx_size variable consistently instead of
(ss_txfrm_size / 2) or (ss_txfrm_size >> 1) expression.
Change-Id: I1b9bba2c0a9f817fca72c88324bbe6004766fb7d
The macro block mode info context originally contained an
entry for each 16x16 macroblock. In VP9 each entry refers
to an 8x8 region not a macro block, so the naming is misleading.
This first stage clean up changes the names of 3 entries in the
structure to remove the mb_ prefix.
TODO clean up the nomenclature more widely in respect of
mbmi and bmi.
Change-Id: Ia7305c6d0cb805dfe8cdc98dad21338f502e49c6
Loop filter configuration doesn't belong to macroblock, so moving it from
MACROBLOCKD to VP9_COMMON. Also moving the declaration of loopfilter struct
from vp9_blockd.h to vp9_loopfilter.h.
Change-Id: I4b3e34be9623b47cda35f9b1f9951f8c5b1d5d28
Currently the only threaded option for vp9 decode. Enabled when the
decoder config thread count is > 1.
Change-Id: I082959abac9e31aa4a38ed9fd68b94680e57f4df
This changeset allows to remove vp9_switchable_interp and
vp9_switchable_interp_map arrays and make code much clear. Actually we
still have to use these mapping but only inside read_interp_filter_type and
write_interp_filter_type functions.
Change-Id: I4026c6f8c4acefba6c81421b7bacbaa52cc45f50
Removing unused constants, macros, and function declarations. Using
ROUND_POWER_OF_TWO macro, vp9_zero, vp9_copy where possible. Moving
#include from *.h to *.c. Merging for loops for motion vectors.
Change-Id: Ic3bf841764a2bb177128bb3a6d7aa8f68229cd13
Adding plane type check condition because it was always used outside of
get_tx_type_{4x4, 8x8, 16x16}.
Change-Id: I02f0bbfee8063474865bd903eb25b54d26e07230
Counts are separate from frame context. We have several frame contexts but
need only one copy of all counts.
Change-Id: I5279b0321cb450bbea7049adaa9275306a7cef7d
Renamed:
MAX_MB_SEGMENTS to MAX_SEGMENTS
MB_SEG_TREE_PROBS to SEG_TREE_PROBS
The minimum unit for segmentation in the segment map
is now 8x8 so it is misleading to use MB_ as macro-block
traditionally refers to a 16x16 region.
Change-Id: I0b55a6f0426bb46dd13435fcfa5bae0a30a7fa22
Adding loopfilter struct with fields from MACROBLOCKD and VP9Common.
Eventually it will be moved to vp9_loopfilter.h for better code structure.
Change-Id: Iaf5fb71c33719cdfa1b991f671caf071be9ea035
