This prevents a duplicate memcpy of a 128-byte struct every time
set_scale_factors() is called (which is a lot), thus leading to a
decrease from 3.7 MB to 1.85 MB of struct copying per 64x64 block
RD/partition loop.
Overall, this decreases encoding time of the first 50 frames of bus
@ 1500kbps (speed 0) from 1min5.9 to 1min4.9, i.e. about a 1.5%
overall speedup. We can likely get more gains by removing the copy
of the other struct (and replacing it with an indexing) as well.
Change-Id: I3dceb7e79f71e6fe911b11cc994cf89a869dde7a
This is a short term optimization till we work out a decoder
implementation requiring no frame border extension.
Change-Id: I02d15bfde4d926b50a4e58b393d8c4062d1be70f
Implements some of the helper functions more efficiently with
lookups rathers than branches. Modeling function is consolidated
to reduce some computations.
Also merged the two enums BLOCK_SIZE_TYPES and BlockSize into
one because there is no need to keep them separate (even though
the semantics are a little different).
No bitstream or output change.
About 0.5% speedup
Change-Id: I7d71a66e8031ddb340744dc493f22976052b8f9f
Adding segmentation struct to vp9_seg_common.h. Struct members are from
macroblockd and VP9Common structs. Moving segmentation related constants
and enums to vp9_seg_common.h.
Change-Id: I23fabc33f11a359249f5f80d161daf569d02ec03
Adds a speed feature to eliminate full-rd computation if the modeled
rd or rd based on a different parameter in the same mode is already
a lot larger than the best rd yet.
Specifically, only search the sharp and smooth filters if the modeled
rd cost based on the regular filter is within a certain factor of the
best rd cost so far. Also, skip full-rd computation of non splitmv
inter modes if the modeled rd cost based on pred error is within the
same factor of the best rd cost so far.
Also adds some enhancements in the rd search for splitmv mode to
speed things up by early breakouts. Negligible impact on performance.
Resuts on derfraw300:
psnr: -0.013% with the splitmv enhancements, -0.24% with the rd
breakout feature on.
speedup: 6% with splitmv enhancements, 20% with also residual breakout
(tested on football sequence at 600 Kbps)
Change-Id: I37abc308ea9f110c1679ce649b6a7e73ab1ad5fc
Replace case statement with lookup.
Small speed gain at low speed settings but at speed 2+ where the
number of motion searches etc. falls the impact rises to ~3-4%.
Change-Id: Idff639b7b302ee65e042b7bf836943ac0a06fad8
Change-Id: I5940719a4a161f8c26ac9a6753f1678494cec644
(1) Refines the modeling function and uses that to add some speed
features. Specifically, intead of using a flag use_largest_txfm as
a speed feature, an enum tx_size_search_method is used, of which
two of the types are USE_FULL_RD and USE_LARGESTALL. Two other
new types are added:
USE_LARGESTINTRA (use largest only for intra)
USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for
inter)
(2) Another change is that the framework for deciding transform type
is simplified to use a heuristic count based method rather than
an rd based method using txfm_cache. In practice the new method
is found to work just as well - with derf only -0.01 down.
The new method is more compatible with the new framework where
certain rd costs are based on full rd and certain others are
based on modeled rd or are not computed. In this patch the existing
rd based method is still kept for use in the USE_FULL_RD mode.
In the other modes, the count based method is used.
However the recommendation is to remove it eventually since the
benefit is limited, and will remove a lot of complications in
the code
(3) Finally a bug is fixed with the existing use_largest_txfm speed feature
that causes mismatches when the lossless mode and 4x4 WH transform is
forced.
Results on derf:
USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction
USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a
pretty good compromise)
USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction
(currently the benefit of modeling is limited for txfm size selection,
but keeping this enum as a placeholder) .
USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing
use_largest_txfm speed feature).
Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936
since:
92479d9 Make update_partition_context faster
fixes:
vp9/common/vp9_blockd.h:408:22: error:
non-constant-expression cannot be narrowed from type 'int' to 'char' in
initializer list [-Wc++11-narrowing]
char pcvalue[2] = {~(0xe << boffset), ~(0xf <<boffset)};
^~~~~~~~~~~~~~~~~
Change-Id: Id5b00b9a72d00a2b314081a23879bd1fa3ce983b
Use vpx_memset for updating the partition contexts. Thanks to Noah
for pointing out the need of refactoring in this part.
Change-Id: I67fb78429d632298f1cd8a0be346cc76f79392a6
This reduced the size of the MODE_INFO array (mip and prev_mip)
by 425,568 bytes each for 1080p resolutions.
Change-Id: Ifa513ec2d0a49e8ec0867ec90620762fb7f1261d
Change the argument of get_uv_tx_size() to be an MBMI pointer, so that the
correct column's MBMI can be passed to the function.
Change-Id: Ied6b8ec33b77cdd353119e8fd2d157811815fc98
Fixed point scaling factors are calculated once for each
reference frame by using integer division. Otherwise fixed point
scaling routines are used in all scaling calculations. This makes it
possible to calculate fixed point scaling factors on device driver
software and pass them to hardware and thus avoid division on hardware.
TODO:
- Missing check for maximum frame dimensions
(currently scaling uses 14 bits)
- Missing check for maximum scaling ratio
(upscaling 16:1, downscaling 2:1)
Problems:
- Straightforward fixed point implementation can cause error +-1
compared to integer division (i.e. in x_step_q4). Should only
be an issue for frames larger than 16k.
Change-Id: I3cf4dabd610a4dc18da3bdb31ae244ebaf5d579c
Adds coding of transform size within a frame by use of context
of transform sizes selected in left and above blocks.
Also incorporates code for generating stats.
TODO: generate and incorporate new default stats
Change-Id: I6a7af099f6ad61d448521d9a51167aedaf638ed6
With the removal of i4X4 and SPLIT_MV modes, the two entries for the
modes are no longer used. This patch remove the coding of the deltas.
Change-Id: Iea4eb500404ebe9706159380a03b8eca542fb4c3
Changes to the coding of transform sizes, along with forward
and backward probability updates.
Results:
derf300: +0.241%
Context based coding of transform sizes will be in a separate
patch.
Change-Id: I97241d60a926f014fee2de21fa4446ca56495756
Code intra/inter, then comp/single, then the ref frame selection.
Use contextualization for all steps. Don't code two past frames
in comp pred mode.
Change-Id: I4639a78cd5cccb283023265dbcc07898c3e7cf95
Split partition probabilities between keyframes and non-keyframes,
since they are fairly different. Also have per-blocksize interframe
y intramode probabilities, since these vary heavily between different
blocksizes.
Lastly, replace default probabilities for partitioning and intra modes
with new ones generated from current codec. Replace counts with actual
probabilities also.
Change-Id: I77ca996e25e4a28e03bdbc542f27a3e64ca1234f
This avoids encoding tokens for blocks that are entirely
in the UMV border. This changes the bitstream.
Change-Id: I32b4df46ac8a990d0c37cee92fd34f8ddd4fb6c9
This commit makes the coding/reconstruction operations of intra
coding rate-distortion loop for UV components consistent with those
of the encoding process.
key frame coding gains:
derf: 0.11%
stdhd: 0.42%
Change-Id: I8d49f83924a320e3689ef2d60096c49d7f0c7a40
