As a precursor to encoding 32x32 blocks this cl adds the
ability to encode the frame superblock (=32x32 block) at
a time. Within a SB the 4 indiviual MBs are encoded in
raster-order (NW,NE,SW,SE).
This functionality is added as an experiment which can be
enabled by ispecifying --enable-superblocks in the
command line specified to configure (CONFIG_SUPERBLOCKS
macro in the code).
To make this work I had to disable the two intra
prediction modes that use data from the top-right of the
MB.
On the tests that I have run the results produce
almost exactly the same PSNRs & SSIMs with a very
slightly higher average data rate (and slightly higher
data rate than just disabling the two intra modes in
the original code).
NOTE: This will also break the multi-threaded code.
This replaces the abandoned change:
Iebebe0d1a50ce8c15c79862c537b765a2f67e162
Change-Id: I1bc1a00f236abc1a373c7210d756e25f970fcad8
Commented out changes from earlier checking:
"Change Iab7f1eff: vpnext use segref segmentation filter"
Which in its current state breaks the decoder.
Change-Id: I9185098aeda8ce65310f338c4c9375f4a39005d3
The bug was introduced by the commit that added I8X8 intra prediction
mode for inter frames, the decoder was not update to accept the additional
probability update from encoder. This causes the decoder typicall to crash
when encoder sends intra mode probability update.
Change-Id: Ib7dc42dc77a51178aa9ece41e081829818a25016
This check in uses the common prediction interface functions
to code reference frame.
Some updates made regarding the impact of the new code in rd loop
but there remain TODOs in this regard.
Change-Id: I9da3ed5dfdaa489e0903ab33258b0767a585567f
This does not change any functionality just modifies the code to
use the common prediction module interface for coding
the segment data.
Change-Id: Ifd43e9153573365619774a4f5572215e44fb5aa3
This function adds the common prediction modules, some data structures
and a config option but does not use them.
It also corrects a bug in clearing down the MODE_INFO border and introduces
a new element that indicates if an entry corresponds to an "in image" macro block
or is part of the border.
Change-Id: Ib69eec0876173ebe9d1de9df9537d0b2447702e0
Picks a per segment loopfilter. Adapts the algorithm to search for
a loopfilter value for each separate segment. Further todo fix the
bias
Improvements .06 % ov psnr, .11% ssim
http://www.corp.google.com/~jimbankoski/no_crawl/segmentedpicklpf.html
Change-Id: Ic6a571c16fcd6ec0139f4de1f8061f87c6515a10
changed the token cost for 8x8 transformed macroblock used in trellisquant
from those derived from 4x4 transform coefficient distribution to those
derived from 8x8 transform coefficient distribution. Test results show
this fix help 8x8 transform based compression consistently on cif and hd
sets:
http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif_cost8x8only.html
(avg psnr:.14% glb psnr: .17% ssim: .20%)
http://www.corp.google.com/~yaowu/no_crawl/t8x8/hd_cost8x8only.html
(avg psnr:.17% glb psnr: .18% ssim: .58%)
Note: To test the effect of this change, 8x8 transform was forced to be used
only on 16x16 predicted macroblocks on inter frames, the effect would be
bigger had all macroblocks been forcd to use 8x8 transform.
Change-Id: If9b7868b75357c66541f511e5ee78e4d2d4929a4
using an 8-tap filter.
The results with 3 different 8-tap filters on the derf set are in:
http://www.corp.google.com/~debargha/vp8_results/enhinterp.html
The one that gives the most gain achieves an overall gain of about
0.6%. The results for a set of 12 hd (720p) videos are in:
http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd.html
with max gain of 0.55% with the same filter. The best filter apparently
achieves the best trade-off between pass band ripple and stop band
attenuation.
Change-Id: I919e28ae245c0493147fa0864f8c9d048a9dd530
This introduces base functions for introducing implicit segmentation.
The code that actually stores the results to the segment map isn't
here yet. This just prints out the segmentation map results
if you call it.
Uses connected component labeling technique on mbmi info so that only
if 2 mbs are horizontally or vertically touching do they get the same
segment.
vp8next - plumbing for rotation
code to produce taps for rotation ( tapify. py ), code
for predicting using rotation ( predict_rotated.c ) , code
for finding the best rotation find_rotation.c.
didn't checkin code that uses this in the codec. still work
in progress.
Fixed copyright notice
Change-Id: I450c13cfa41ab2fcb699f3897760370b4935fdf8
This commit added a set of loop filter functions for macroblocks
using 8x8 transform. First we turned off the regular loop filtering
on 4x4 block boundaries that do not exist in macroblocks using 8x8
transform. Second, we change to use the same loop filter(mask and
7 tap filter) that used for macroblock edge filtering.
Change-Id: I3a00460b7674ced116917d86812ffc32578c1d3a
This fixed a conflict introduced by the change of adding 8x8 intra
prediction modes. The 8x8 intra prediction mode code assumed the
use of 4x4 transform, and causes encoder crashes when the codec is
configured with --enable-t8x8.
Change-Id: I00cc94df63e9725377ffba9eb51be6b77fe3fcf9
commit cf561bad accidentally deleted a line of code that sets the
base_qindex for each frame, which leads to every frame is encoded
at Q of 0.
Change-Id: Ib5f8022e856bf3b3bd0d4147405e46241e3dcf2d
The commit adds a new set of loop filter for macroblock edge filtering.
The new loop filter has a mask to detect so-called "flat" regions. The
detection checks 5 pixels of each side of an edge. If the all pixels
have value with +/-1 from the edge pixel on the same side, the region
is treated as a "flat" region. For such case, a 7 tap filter is used
to change 3 pixel values on each side. The 7 taps are:
[1, 1, 1, 2, 1, 1, 1]/8
The furthest away pixels used as input are +/-5 away from edge. For
non-flat region, we fall back to old filtering. It should be noted
here that the thresholds and filter taps may require more optimization
for best possible results.
Tests on a set of hd clips showed consistent gains:
http://www.corp.google.com/~yaowu/no_crawl/mblpf_hd.html
(avg psnr: .83% glb psnr: .77% ssim: .82%)
Tests on derf set also showed consistent gains:
http://www.corp.google.com/~yaowu/no_crawl/mblpf_derf.html
(avg psnr: .24% glb psnr: .22% ssim: .48%)
Change-Id: I0855b1ff48e79e1175c20b81967137e18b2af352
A problem can arise on static clips with force key frames where
attempts to avoid popping lead to a progressive reduction in key
frame Q that ultimately may lead to unexpected overspend against
the rate target.
The changes in this patch help to insure that in such clips the
quality of the key frames across the clip is more uniform (rather
than starting bad and getting better - especially at low target rates).
This patch also includes a fix that removes a delta on the Y2DC
when the baseline q index < 4 as this is no longer needed.
There is also a fix to try and prevent repeat single step Q adjustment in
the recode loop leading to lots of recodes, especially where the use
of forced skips as part of segmentation has made the impact of Q on
the number of bits generated much smaller.
Patch 2: Amend "last_boosted_qindex" calculation for arf overlay frames.
Change-Id: Ia1feeb79ed8ed014e4239994fcf5e58e68fd9459
In certain hardware configuration, where mmx code is enabled and
other simd (sse2/sse3) disabled, lacking of this emms caused invalid
internal stats outputs.
Change-Id: I77c61cf6e0448d3f3b8c11781aa9e42f31d231c9
Previously, the mode context is always udpated based on stats of current
frame, when there is no count, 50% is used for both left and right branch.
However, it is observed that with such strategy, a small count or no count
at all can skew the probability distribution significantly. This commmit
changed the mode_context update strategy to prevent small counts from
skewing the probability distributions.
Tests on derf set showed a small gain: .06% in psnr and .09% in ssim
Change-Id: Ic812e64ae5f70251c170b0717f7b7fa587055488
This commit extends the number of Q steps to 256 from 128.
The q_trans[] array has been altered to distribute available Q index values
(using the current 64 steps available as input parameters) evenly across the
available range. This is coupled with the fact that each Q step where possible
now equates to a fixed % change in the quantizer. This may want refinement
later especially in terms of the granularity at the high quality end but is a
reasonable starting point.
Change-Id: I2aaa6874fa10ce05c958dd182947ce39f6f1eecb
High Q end extended a little.
Some clean up.
Slightly better on SSIM, Slightly worse on PSNR over derf set.
Change-Id: I3dceea8a39e11c26e1a389a40e40b86efc76d28c
Added code to support 256 index steps instead of 128 but disabled for now.
Replace hard wired table vp8cx_base_skip_false_prob[128]
Observed Qindex problem with setting minimum loop filter value.
(Experiment code using real Q in place but for now just returning 0. This has a big
beneficial effect on some clips, particularly waterfall which shows 5% ssim gain)
Change-Id: I2f7117de8adc1797164c106aa13effc900a1467e
Whilst the encoder explicitly set the segment_id to 0
when segmentation is diabled, the decoder would allow
the segment_id to persist from the previous frame.
This fix attempts to make the decoder behave the same
as the encoder by explicitly setting the segment_id to
0 in this case.
Change-Id: I65c3a05247550edb10706eb5d54d306dfb792309
mode_info_context is padded with an additional column of data, so
mode_info_stride should be used to move between rows rather than
mb_cols.
Change-Id: I598559a2cd9df1c486d64aaeccf76b76a7ecf21c
Both encoder & decoder were using mb_cols to
offset from one row of MODE_INFO structures to the next
when they should have been using mode_info_stride.
Fixing this in both encoder and decoder gives around
a 3KB size saving and 0.025dB PSNR improvement on the one
720P clip I tried.
(Also removed "index" which was being updated but not used)
Change-Id: I413bea802b142886bfcf8d8aa7f5a2f0c524fd4b
Removed a couple more fixed tables for the extended quantizer experiment
that depend on QINDEX_RANGE.
Change-Id: I2c15ffc7488c2a2b8d6504e2c4b6b2339799d117
Previously, Y-adaptive UV intra coding only enabled on key frames in
UVINTRA experiment. This commit enabled the same coding for inter
frames, so the encoding of UV intra modes are consistent cross all
frame types. Tests on derf set showed a very small overall gain around
.04%:
http://www.corp.google.com/~yaowu/no_crawl/interUVintra.html
The gain looks to be reasonable given inta coded MBs is only a
small portion of MBs in inter frames.
Change-Id: Ic6fc261923f2c253f4a0c9f8bccf4797557b9e16
update_mbgraph_frame_stats used xd->mode_info_context
before it had been setup, resulting in potentially
random accesses of uninitialized memory.
This fix allocates a local MODE_INFO structure to hold
the data generated in the function.
Change-Id: Ic9e75610008ce0e2d690e8e583c21582fee6fc45
A previous commit 76feb965 made the vp8_mode_context adaptive on a frame
frame basis, this commit further made the coding context adaptive to two
frame types separately. Tests on derf set showed a further small gain on
all metrics: avg psnr 0.10%, glb psnr: 0.11%, ssim: 0.08%
http://www.corp.google.com/~yaowu/no_crawl/newNearMode_1209.html
Change-Id: I7b3e32ec8729de1903d14a3f1213f1624b78cdee
The commit fixed a problem by capping cpi->active_best_quality to be
smaller than cpi->worst_quality. Also fixed a few line of code that
was misplaced.
Change-Id: Ie908264b72140c669122a0afde5d886619c33474
This commit removed the macro CONFIG_MULCONTEXT, which was used to
indicate the experiment code for using separate context for altref
and normal frames. This commit made the change fully merged in.
Change-Id: I525f927f68e2365d37b340ef23b836a136a4f70b
This commit removed the macro CONFIG_I8X8, which was used to indicate
the 8x8 intra prediction experiment, made the change fully merged in.
Change-Id: Iafa4443781ce6e83f5591c12ba615a0e92ce0ea0
vp8_mode_contexts[] is an entropy table used to code inter mode
choices. It was a fixed constant table. This commit made the entropy
context adaptive. Tests on derf set showed very good consistent gains
on all metrics: avg psnr .47%, overall psnr .46% and ssim .40%.
http://www.corp.google.com/~yaowu/no_crawl/newModeContext.html
Change-Id: Ia62b14485c948e2b74586118619c5eb2068b43b2
The MODE_STATS macro was used to #ifdef around code for mode entropy
stats collection, this commit fixed a crash when MODE_STATS is on.
The commit also changed a number of array definitions to use defined
macros instead of hard-coded numbers.
Change-Id: I114592f53a1e44e31e455f5725f036ae6168735a
Because the variable doesn't distinguish between DC and non-DC
prediction, but rather between 16x16 or 4x4 prediction.
Change-ID: Ia4e7dda2bd6230c91515072e3277be2d64e42629
This patch introduces the concept of dual inter16x16 prediction. A
16x16 inter-predicted macroblock can use 2 references instead of 1,
where both references use the same mvmode (new, near/est, zero). In the
case of newmv, this means that two MVs are coded instead of one. The
frame can be encoded in 3 ways: all MBs single-prediction, all MBs dual
prediction, or per-MB single/dual prediction selection ("hybrid"), in
which case a single bit is coded per-MB to indicate whether the MB uses
single or dual inter prediction.
In the future, we can (maybe?) get further gains by mixing this with
Adrian's 32x32 work, per-segment dual prediction settings, or adding
support for dual splitmv/8x8mv inter prediction.
Gain (on derf-set, CQ mode) is ~2.8% (SSIM) or ~3.6% (glb PSNR). Most
gain is at medium/high bitrates, but there's minor gains at low bitrates
also. Output was confirmed to match between encoder and decoder.
Note for optimization people: this patch introduces a 2nd version of
16x16/8x8 sixtap/bilin functions, which does an avg instead of a
store. They may want to look and make sure this is implemented to
their satisfaction so we can optimize it best in the future.
Change-ID: I59dc84b07cbb3ccf073ac0f756d03d294cb19281
Resolved or factored out some further issues with Q index.
Put in a 3rd order polynomial instead of less accurate power function
as the best fit on gf and kf boost adjustment.
Added avg_q value to use instead of ni_av_qi.
Compute segment delta Q values based on avg_q.
Fixed bug in adjust_maxq_qrange().
The extended range Q on the derf set, using standard data rates
(which do not extend high enough to get big benefits) still show
a shortfall of between 0.5 and 1% though so there would appear to
be further issues that need to be tracked down.
Change-Id: Icfd49b9f401906ba487ef1bef7d397048295d959
This commit added code to keep track of separate entropy contexts for
normal frames and alt ref frames. The underly assumption was that the
two type of frames have different entropy characteristics given they
typically have quite different quantization levels. By keeping entropy
contexts separate, it helps the entropy context distribution to be more
closely adapted to each frame type.
Tests on derf set showed a good and very consistent gain on all clips
on all metrics, avg psnr: 0.89%, overall psnr: 0.84% and ssim 0.93%.
http://www.corp.google.com/~yaowu/no_crawl/mulcontext.html
Change-Id: I15bc9697f6ff7829042911fe0c62930585d7e65d
This commit enabled the usage of 8x8 intra prediction modes on inter
frames. There are a few TODO items related to this: 1)baseline entropy
need be calibrated; 2)cost of UV need to be done more properly rather
than using decision only relying on Y; 3)Threshold for allowing picking
8x8 intra prediction should be lowered to lower than the B_PRED.
Even with all the TODOs, tests showed consistent gain on derf set ~0.1%
(PSNR:0.08% and SSIM:0.14%). It is assumed that 8x8 intra prediction
will help more on large resolution clips, especially with above TODOs
addressed.
Change-Id: I398ada49dfc32575cfab962a569c2885111ae3ba
Fixed some further QIndex related issues and replaced some tables
(eg zbin and rounding)
Also Added function (currently disabled by default) to populate the
main AC and DC quantizer tables. Using the original AC range the
resulting computed DC values give behavior broadly comparable
on the DERF set. That is not to say that the equations will hold good
over a more extended range. The purpose of this code is to make it
easier to experiment with further alterations to the Q range and distribution
of Q values plus the relative weights given to AC and DC.
The function find_fp_qindex() ensures that changes to the Q tables
are reflected in the value passed in to the first pass code.
Slight experimental adjustment to static segment Q offset.
Change-Id: I36186267d55dfc2a3d565d0cff7218ef300d1cd5
this commit is to add an variable in the macroblock level mode
info structure to track the transform size used in each MB, so
the information can be used later in the loop filter to change
how loop filter works on MBs with different transform sizes.
Change-Id: Id0eeaba6cc854c6d1be00ed8d237b3d9e250e447
Slight tweaks to the new minq equations to bring results more into line with
original lookup tables.
Change-Id: I969fc87d95912df549b6775e83ee2345e84d4da0
Fixed bug in firspass.c call to vp8_initialize_rd_consts()
This was passing in vp8_dc_quant(cm->base_qindex, cm->y1dc_delta_q)
instead of (cm->base_qindex + cm->y1dc_delta_q).
It just so happens that for the value 26 used for cm->base_qindex in the
unextended Q case, the two give similar results. However, when using
the extended Q range the two are very different.
Also added more stats output and partly disabled another broken feature.
Change-Id: Iddf6cf5ea8467c44b7c133f38e629f6ba6f2581e
This is an experiment to include a mv contribution from last frame to
nearest and near mv definition. Initial test showed some small though
consistent gain.
latest patch slightly better result ~.13%-~.18%.
TODO: the entropy used to encode the mode choice, i.e. the mv counts
based conditional distribution of modes should be re-collected to
reflect this change, it is expected that there is some further gain
from that.
Change-Id: Ief1e284a36d8aa56b49ae5b360c91419ec494fa4
This comitt brings accross changes from the public branch
commit number Icf74d13af77437c08602571dc7a97e747cce5066.
The main puurpose of this comit relates to CQ mode but it
also includes some refactoring of the two pass code which
I hope will make tuning the experimental branch for the new
quantizer range a little less painfull.
Change-Id: I278e989436a928fc1fe7761068960048f9d7a376
This commit resolves further QIndex look up tables to facilitate
experimentation with the quantizer range.
In some cases rather than remove the look up tables completely
I have created functions that are called once to populate them
using a formulaic approach base on the actual quantizer.
The use of these functions based on best fit of data from the original
tables does affect the results on some clips but across the derf test
set the effect was broadly neutral.
Change-Id: I8baa61c97ce87dc09a6340d56fdeb681b9345793
One of the problems arising when tweaking or adjusting the quantizer
tables is that there are a lot of look up tables that depend on the QINDEX.
Any adjustment to the link between QINDEX and real quantizer therefore tends
to break aspects of for example the rate control.
In this check in I have replaced several of the look up tables with functions that
approximate the same results as the old Q luts but use a formulaic approach
based on real Q values rather than QIndex. This should hopefully make it easier
to experiment with changes to the Q tables without always having to go through
and hand optimize a set of look up tables. Once things stabilize we may choose
to re-instate luts for the sake of performance.
Patch 2:
Addressed Ronald's comments.
vp8_init_me_luts() Added so luts only initialized once.
Change-Id: Ic80db2212d2fd01e08e8cb5c7dca1fda1102be57
Corrected dc lookup table to maintain ac/dc balance
close to what it was previously.
Firstpass not being passed the adjusted Q index for
the extended range.
Change-Id: Ic0200dabda445fea03bf81067999cb2670e99b77
Fix decoder segmentation bug for temporal coding where the segment map
was first initialized on a key frame.
in vp8_kfread_modes() after reading the segment id it must be written to
the pbi->segmentation_map[] for use in temporal coding on subsequent frames.
Change-Id: I1489305efc376564e734a216f69c2844646ee3d3
The buffer level was able to increase indefinitely rather than
being clipped to the maximum buffer size specified by the user.
This change checks the buffrer level and prevents it from
going beyond the upper limit of the buffer.
Change-Id: Ifff55f79d3c018e4d3d77e554b11ada543cc1654
This commit has a few minor fixes to the 8x8 trellis quant, so to
make it work regardless if extend_qrange is enabled or not. It also
borrowed adaptive RDMULT constants from 4x4 trellis that was missed
in the 8x8 trellis quant.
Change-Id: I60d7769071f102c699b5084597e62bca87a1f759
Explicit inclusion of limits.h to satisfy unix build for definition of INT_MAX.
Some commented out code removed.
Change-Id: I5b5980dfaa9b4d2d12bfd729cfd35bd982106908
Removal of CONFIGURE_SEGMENTATION ifdefs.
Removal of legacy support code fo the old coding mechanism.
Use local reference "xd" for MACROBLOCKD structure in
encode_frame_to_data_rate()
Moved call to choose_segmap_coding_method() out of encode
loop as the cost of segmentation is not properly accounted
in the loop anyway. If this is desirable in the future it
can be moved back. The use of this function to do all the
analysis and set the probabilities also removes the need
to track segment useage in threading code.
Change-Id: I85bc8fd63440e7176c73d26cb742698f9b70cade
Changed name and sense of segment_flag to "seg_id_predicted"
Added some additional comments and retested.
I also did some experimentation with a spatial prediction option
using a similar strategy to the temporal mode implemented.
This helps in some cases where temporal prediction is bad but
I suspect there is more overlap here with work on a larger scale
block structure and spatial correlation will likely be better
handled through that mechanism.
Next check in will remove #ifdefs and legacy mode code.
Change-Id: I3b382b65ed2a57bd7775ac0f3a01a9508a209cbc
This check in includes quite a lot of clean up and refactoring.
Most of the analysis and set up for the different coding options for the
segment map (currently simple distribution based coding or temporaly
predicted coding), has been moved to one location (the function
choose_segmap_coding_method() in segmenation.c). This code was previously
scattered around in various locations making integration with other
experiments and modification / debug more difficult.
Currently the functionality is as it was with the exception that the
prediction probabilities are now only transmitted when the temporal
prediction mode is selected.
There is still quite a bit more clean up work that will be possible
when the #ifdef is removed. Also at that time I may rename and alter
the sense of macroblock based variable "segment_flag" which indicates
(1 that the segmnet id is not predicted vs 0 that it is predicted).
I also intend to experiment with a spatial prediction mode that can be
used when coding a key frame segment map or in cases where temporal
prediction does not work well but there is spatial correlation.
In a later check in when the ifdefs have gone I may also move the call
to choose_segmap_coding_method() to just before where the bitsream is
packed (currently it is in vp8_encode_frame()) to further reduce the
possibility of clashes with other experiments and prevent it being called
on each itteration of the recode loop.
Change-Id: I3d4aba2a2826ec21f367678d5b07c1d1c36db168
Added last_segmentation_map[] structure
to keep track of what we had before when
doing temporal prediction. With this change
the existing code does once again appear to
be giving a decodable bitstream for both
temporal and standard prediction modes.
However, it is still somewhat messy and
confused and there is no option to take
advantage of spatial prediction so it could
do with further work.
Some housekeeping / clean out.
Change-Id: I368258243f82127b81d8dffa7ada615208513b47
Some initial cleanup to aid testing and debug.
Pull code to choose temporal or spatial encoding
out of encodeframe.c into a dedicated function
in segmentation.c.
For now disable broken temporal mode.
Move the coding of "temporal_update" flag and
only transmit if segment map update is indicated.
Rename the functions read_mb_features() and
write_mb_features() to read_mb_segid() and
read_mb_segid() as they only read and write
the macroblock segment id not any of the
features.
Change-Id: Ib75118520b1144c24d35fdfc6ce46106803cabcf
The dequantizer functions for 2nd order haar block had confusing 8x8
in their names. this commit fixed their name to avoid confusion.
Change-Id: I6ae4e7888330865f831436313637d4395b1fc273
This commit added scaling factors to 8x8 transform, quant, dequant and
inverse transform pipeline to make 8x8 transform to work when configed
with enable-extend_qrange. This commit also disabled the trellis-quant
when extend_qrange is configured.
Change-Id: Icfb3192e4746f70a4bb35ad18b7b47705b657e52
updated the decode_macroblock logic to reflect that 8x8 transform is
not used for "SPLITMV". Also fixed an issue where 2nd order haar block
has wrong dequant/idct process.
Change-Id: I1e373f6535c009dfec503b6362c8a5cfc196e1da
extend_qrange introduces a different scaling factor, this commit takes
the scaling difference into account for reset 2nd order coefficients.
Change-Id: Ie58bca9f52698fa759e3f88da2aa4d82630fa91a
the bug caused the encoder to produce invalid bitstream when configured
with enable_extend_qrange.
Change-Id: I1e81c48b13359d0043cbbd480e679380a2da117c
For ease of testing and merging experiments I have
removed in line code in encode_frame() that assigns
MBs to be t8x8 or t4x4 coded segments and have
moved the decision point and segment setup to
the init_seg_features0 test function.
Keeping everything in one place helps make sure
for now that experiments using segmentation are
not fighting each other.
Also made sure mode selection code can't choose 4x4
modes if t8x8 is selected.
Patch2: In init_seg_features() add checks
for SEG_LVL_TRANSFORM active.
Change-Id: Ia1767edd99b78510011d4251539f9bc325842e3a
Removed code in #if CONFIG_SEGMENTATION that
enables segmentation and creates a test segmentation
map, to avoid conflicts with the other segmentation test
code,
Change-Id: I7a21a44ed188b814cd80b30dd628c62474eba730
Bug fix to logic in vp8_pick_inter_mode() and
vp8_rd_pick_inter_mode().
The block on the use of segment features
for the cm->refresh_alt_ref_frame case
was just for testing and is not correct.
The special case code for alt ref can
be re-enabled as an else clause.
Change-Id: Ic9b57cdb5f04ea7737032b8fb953d84d7717b3ce
The 8x8 forward transform makes use of floating operations, therefore
requires emms call to reset mmx registers to correct state. Without
the resets, the 8x8 forward transform results are indefinite on win32
platform.
Change-Id: Ib5b71c3213e10b8a04fe776adf885f3714e7deb1
logically this commit should NOT change anything, but seems to help
revert the 3DB loss on bowing in the following commit:
https://on2-git.corp.google.com/g/#change,6193
This is still debugging in progress. Need further investigation to
understand the root cause of the issue.
Change-Id: I0b49d1ef3a311dfff58c6acd3eaebdb3bda6257c
Initial attempt at using new segment feature signaling
to indicate 4x4 or 8x8 transform.
needs --enable-experimental --enable-t8x8
Note this is work in progress.
Change-Id: Ib160d46a5d810307bfcbc79853ce1a65b5b870b7
Temporary check in to turn off other segment features
tests when #if CONFIG_T8X8 is set as the assignment of
MBs to differnt segments in each case will conflict.
The 8x8 code will be modified to use the new segment
feature method properly in a later check in.
Increase bits allowed for EOB end stop marker to 6 ready
for 8x8.
Change-Id: I4835bc8d3bf98e1775c3d247d778639c90b01f7f
No change to functionality or output.
Updates to the segment feature data structure now all done
through functions such as set_segdata() and get_segdata()
in seg_common.c.
The reason for this is to make changing the structures (if needed)
and debug easier.
In addition it provides a single location for subsequent addition
of range and validity checks. For example valid combination of
mode and reference frame.
Change-Id: I2e866505562db4e4cb6f17a472b25b4465f01add
This commit tries to do UV intra mode coding adaptive to Y intra mode.
Entropy context is defined as conditional PDF of uv intra mode given
the Y mode. All constants are normalized with 256 to be fit in 8 bits.
This provides further coding efficiency beyond the quantizer adaptive
y intra mode coding. Consistent gains were observed on all clips and
all bit rates for HD all key encoding tests.
To test, configure with
--enable-experimental --enable-uvintra
Change-Id: I2d78d73f143127f063e19bd0bac3b68c418d756a
As discovered in path 10 of Change Ia12acd2f, reset 2nd order coeffs
without reset of above and left coding context may have introduced
problem that causes encoder/decoder mismatching. This commit added
update to coding context when the 2nd coefficients are cleared.
In addition, this commit also introduced early breakout in the checks
to speed up when coefficients are too significant to be cleared.
Change-Id: I85322a432b11e8af85001525d1e9dc218f9a0bd6
Removal of configure #ifdefs so that segment features
always available. Removal of code supporting old
segment feature method.
Still a good deal of tidying up to do.
Change-Id: I397855f086f8c09ab1fae0a5f65d9e06d2e3e39f
Modify reference frame segmentation so that ONE or MORE
reference frames may be marked as a available for a given
segment.
Fixed bugs relating to segment coding of INTRA and some
INTER modes at the segment level.
Modified Q boost for static areas based on ambient average Q.
Strong results now on clips with significant static areas.
(some data points in derf set as high as 9% and some static &
slide show type content in YT set > 20%)
Change-Id: Ia79f912efa84b977f35a23683ae3643251e24f0c
The block of code skipped testing the current mode if the
reference frame is AltRef, the mv is not (0,0) and
ARNR filtering is disabled.
This block of code has already been tested above if the
macro CONFIG_SEGFEATURES is set to 0.
Change-Id: I3f5710bb8270caad06c9a0eee59fa0daf1f70776
The variable this_mode was being used before it had been
initialized.
Moved the line that sets-up this_mode toward the top of the
enclosing loop, prior to its first use. The bug would result in
tests in the loop lagging the mode that was expected to be
tested.
Change-Id: If4e51600449ce6b4285f112da17a44c24b4a19fb
Some correction for entropy impact of segment signaled (EOB and ref frame)
Other slight tweaks.
Derf VBR average gain now over 1% (best over 7%)
One YT test clip has gains of circa 30% (VBR)
There is still an issue with noisy clips where making the background static
and coded with 0,0 can have a negative effect, especially at low Q.
This is probably because of the loss of smoothing by fractional pixel filters.
Change-Id: I7a225613c98067b96f8fc7a7e36f95d465b2b834
Prior to the added rounding, tests on randomly generated data showed
that forward-inverse transform round trip errors are about 3.02/block
for input range [-10,10] and 2.68/block for input range [-256, 255].
The added rounding reduced the errors to 0.031/block for input range
[-10,10] and 0.037/block for input range [-256, 255].
Maximum round trip error on for any pixel position is 1.
The average errors are calculated based on 100,000 blocks of randomly
with the specified ranges.
Paul mentioned in discussion that the change was not clear on why we
need change the rounding, so Patch 2 intends to make the rationale
obvious in code, it merged the two separate shifts into one, and the
two separate rounding factors into one. Patch 1 and 2 have same
numerical test results.
Change-Id: Ic5e2f5463de17253084d8b2398c4a210194b20de
Only encode sign bit for feature data that can have a sign.
Tweaks to the test segmentation rules so that it now actually gives
a net benefit on the derf set of about 0.4% though much higher
on some clips at the low end.
Change-Id: I8e61f1aebf41c9037db7e67e2f8975aa18a0c986
This quite large check in includes the following:
Merge in some code from Ronald (mbgraph.c) that scans a Gf/arf group.
This is used as a basis for a simple segmentation for the normal frames
in a gf/arf group. This code also uses satd functions from Yaowu.
Adds functionality for coding the latest possible position of an EOB for
blocks in the segment. (Currently 0-15 only, hence just for 4x4 dct).
Where the EOB position is 0 this acts like "skip" and the normal coding
of skip at the per mb level is disabled.
Added functions (seg_common.c) for setting and reading segment feature
elements. These may want to be optimized away at some point but while the
mecahnism is in a state of flux they provide a single location for making
changes and keep things a bit cleaner.
This is still proof of concept code. Currently the tested feature set:-
Quantizer,
Loop Filter level,
Reference frame,
Prediction Mode,
EOB end stop.
TBD:-
Add functions for setting and reading the feature data with range
and validity checking.
Handling of signed and unsigned feature data. At the moment all is assumed
to be signed and a sign bit is coded but many cannot be negative.
Correct handling of EOB feature with intra coded blocks.
Testing/trapping of legal/illegal ref frame and mode combinations.
Transform size switch plus merge and test with 8c8 DCT work
Merge and test with Sumans Segmenation coding optimizations
Change-Id: Iee12e83661c7abbd1e0ce6810915eb4ec35e2d8e
When 8x8 transform is enabled, the decoder does an extra reconstruct
on MBs that are coded using 8x8. This commit fixed the logic around
the decoding of mb encoded with 8x8 transform.
Change-Id: I6926557c9ef00eecb375f62946f7e140c660bf6f
Proof of concept test code that encodes mode and reference
frame data at the segment level.
Decode-able bit stream but some issues not yet resolved.
As it this helps a little on a couple of clips but hurts on most as
the basis for segmentation is unsound.
To build and test, configure with
--enable-experimental --enable-segfeatures
Change-Id: I22a60774f69273523fb152db8c31f4b10b07c7f4
- Removed fast_fdct4x4_neon and fast_fdct8x4_neon
- Uses now short_fdct4x4 and short_fdct8x4
- Gives ~1-2% speed-up on Cortex-A8/A9
Change-Id: Ib62f2cb2080ae719f8fa1d518a3a5e71278a41ec
Rd and Rm registers should be different in 'mul'. This register
combination results in unpredictable behaviour. GCC will give
a warning and RVCT an error in this case.
Restriction applies only to armv5 targets and not for armv6 and above.
Change-Id: I378d17c51e1f16a6820814fbed43e115aaabb03e
These changes fixes a glitch between the RTP profile and the input
partitions interface. Since there's no way for the user to know the
actual number of partitions, the decoder have to read the
multi_token_paritition bits also when input partitions mode is
enabled.
Included are also a couple of fixes for issues with independent
partitions and uninitialized memory reads.
Change-Id: I6f93b15287d291169ed681898ed3fbcc5dc81837
- Updated walsh transform to match C
(based on Change Id24f3392)
- Changed fast_fdct4x4 and 8x4 to short_fdct4x4 and 8x4
correspondingly
Change-Id: I704e862f40e315b0a79997633c7bd9c347166a8e
Modified original patch If2f07220885c4c3a0cae0dace34ea0e36124f001
according to comments. Scheduled code a little bit to prevent some
interlocks.
Change-Id: I338f02b881098782f82af63d97f042b85e63e902
This commit added a 3 bit index to the bitstream, the index is used to
look into the intra mode coding entropy context table. The commit uses
the mode stats to calculate the cost of transmitting modes using 8
possible entropy distributions, and selects the distribution that
provides the lowest cost to do the actual mode coding.
Initial test show this provides additional .2%~.3% gain over quantizer
adaptive intra mode coding. So the adaptive intra mode coding provides
a total of .5%(psnr) to .6% gain(ssim) combined for all-key-encoding
To build and test, configure with
--enable-experimental --enable-qimode
Change-Id: I7c41cd8bfb352bc1fe7c5da1848a58faea5ed74a
make intra mode coding entropy distribution adaptive to baseQindex, an
encoding test on hd clips with all key frame shows universal gain on
all clips in both .2%(psnr) and (ssim).3%.
To build and test, configure with
--enable-experimental --enable-qimode
Change-Id: Iaa69241b984d4fdd8baa6d77ee78c0140f5ac00a
Patch 1 to Patch 3 is an initial implementation of 8x8 intra prediction
modes, here are with the following assumptions:
a. 8x8 has 4 prediction modes DC, H, V and TM
b. UV 4x4 block use the same mode as corresponding 8x8 area
c. i8x8 modes are enabled for key frame only for now
Patch 4:
d. removed debug code from previous patches
Patch 5:
e. added stats code to collect entropy stats and further cleaned up
Patch 6:
f. changed mode stats code to collect finer stats of modes
Patch 7:
g. normalized i8x8 modes distribution to total at 256 (8bits).
Patch 8:
h. fixed a bug in decoder and removed debug printf output.
Patch 9:
i. more cleanups to address paul's comment
Patch 10:
j. messy rebase/merges to bring the commit up to date.
Tests on HD clips encoded with all key frame showing consistent gain
on all clips and all metrics:~0.5%(psnr) and 0.6%(ssim):
http://www.corp.google.com/~yaowu/no_crawl/i8x8hd_allkey_fixedq.html
To build and test, configure with:
--enable-experimental --enable-i8x8
Change-Id: I9813fe07ae48cab5fdb5d904bca022514ad01e7f
Code all the features for one segment (grouped together)
then all for the next etc. etc. rather than grouping the
data by feature.
Change-Id: I2a65193b3a70aca78f92e855e35d8969d857b6dd
