Previously, the mode context is always udpated based on stats of current
frame, when there is no count, 50% is used for both left and right branch.
However, it is observed that with such strategy, a small count or no count
at all can skew the probability distribution significantly. This commmit
changed the mode_context update strategy to prevent small counts from
skewing the probability distributions.
Tests on derf set showed a small gain: .06% in psnr and .09% in ssim
Change-Id: Ic812e64ae5f70251c170b0717f7b7fa587055488
This commit extends the number of Q steps to 256 from 128.
The q_trans[] array has been altered to distribute available Q index values
(using the current 64 steps available as input parameters) evenly across the
available range. This is coupled with the fact that each Q step where possible
now equates to a fixed % change in the quantizer. This may want refinement
later especially in terms of the granularity at the high quality end but is a
reasonable starting point.
Change-Id: I2aaa6874fa10ce05c958dd182947ce39f6f1eecb
High Q end extended a little.
Some clean up.
Slightly better on SSIM, Slightly worse on PSNR over derf set.
Change-Id: I3dceea8a39e11c26e1a389a40e40b86efc76d28c
Added code to support 256 index steps instead of 128 but disabled for now.
Replace hard wired table vp8cx_base_skip_false_prob[128]
Observed Qindex problem with setting minimum loop filter value.
(Experiment code using real Q in place but for now just returning 0. This has a big
beneficial effect on some clips, particularly waterfall which shows 5% ssim gain)
Change-Id: I2f7117de8adc1797164c106aa13effc900a1467e
Whilst the encoder explicitly set the segment_id to 0
when segmentation is diabled, the decoder would allow
the segment_id to persist from the previous frame.
This fix attempts to make the decoder behave the same
as the encoder by explicitly setting the segment_id to
0 in this case.
Change-Id: I65c3a05247550edb10706eb5d54d306dfb792309
mode_info_context is padded with an additional column of data, so
mode_info_stride should be used to move between rows rather than
mb_cols.
Change-Id: I598559a2cd9df1c486d64aaeccf76b76a7ecf21c
Both encoder & decoder were using mb_cols to
offset from one row of MODE_INFO structures to the next
when they should have been using mode_info_stride.
Fixing this in both encoder and decoder gives around
a 3KB size saving and 0.025dB PSNR improvement on the one
720P clip I tried.
(Also removed "index" which was being updated but not used)
Change-Id: I413bea802b142886bfcf8d8aa7f5a2f0c524fd4b
Removed a couple more fixed tables for the extended quantizer experiment
that depend on QINDEX_RANGE.
Change-Id: I2c15ffc7488c2a2b8d6504e2c4b6b2339799d117
Previously, Y-adaptive UV intra coding only enabled on key frames in
UVINTRA experiment. This commit enabled the same coding for inter
frames, so the encoding of UV intra modes are consistent cross all
frame types. Tests on derf set showed a very small overall gain around
.04%:
http://www.corp.google.com/~yaowu/no_crawl/interUVintra.html
The gain looks to be reasonable given inta coded MBs is only a
small portion of MBs in inter frames.
Change-Id: Ic6fc261923f2c253f4a0c9f8bccf4797557b9e16
update_mbgraph_frame_stats used xd->mode_info_context
before it had been setup, resulting in potentially
random accesses of uninitialized memory.
This fix allocates a local MODE_INFO structure to hold
the data generated in the function.
Change-Id: Ic9e75610008ce0e2d690e8e583c21582fee6fc45
A previous commit 76feb965 made the vp8_mode_context adaptive on a frame
frame basis, this commit further made the coding context adaptive to two
frame types separately. Tests on derf set showed a further small gain on
all metrics: avg psnr 0.10%, glb psnr: 0.11%, ssim: 0.08%
http://www.corp.google.com/~yaowu/no_crawl/newNearMode_1209.html
Change-Id: I7b3e32ec8729de1903d14a3f1213f1624b78cdee
The commit fixed a problem by capping cpi->active_best_quality to be
smaller than cpi->worst_quality. Also fixed a few line of code that
was misplaced.
Change-Id: Ie908264b72140c669122a0afde5d886619c33474
This commit removed the macro CONFIG_MULCONTEXT, which was used to
indicate the experiment code for using separate context for altref
and normal frames. This commit made the change fully merged in.
Change-Id: I525f927f68e2365d37b340ef23b836a136a4f70b
This commit removed the macro CONFIG_I8X8, which was used to indicate
the 8x8 intra prediction experiment, made the change fully merged in.
Change-Id: Iafa4443781ce6e83f5591c12ba615a0e92ce0ea0
vp8_mode_contexts[] is an entropy table used to code inter mode
choices. It was a fixed constant table. This commit made the entropy
context adaptive. Tests on derf set showed very good consistent gains
on all metrics: avg psnr .47%, overall psnr .46% and ssim .40%.
http://www.corp.google.com/~yaowu/no_crawl/newModeContext.html
Change-Id: Ia62b14485c948e2b74586118619c5eb2068b43b2
The MODE_STATS macro was used to #ifdef around code for mode entropy
stats collection, this commit fixed a crash when MODE_STATS is on.
The commit also changed a number of array definitions to use defined
macros instead of hard-coded numbers.
Change-Id: I114592f53a1e44e31e455f5725f036ae6168735a
Because the variable doesn't distinguish between DC and non-DC
prediction, but rather between 16x16 or 4x4 prediction.
Change-ID: Ia4e7dda2bd6230c91515072e3277be2d64e42629
This patch introduces the concept of dual inter16x16 prediction. A
16x16 inter-predicted macroblock can use 2 references instead of 1,
where both references use the same mvmode (new, near/est, zero). In the
case of newmv, this means that two MVs are coded instead of one. The
frame can be encoded in 3 ways: all MBs single-prediction, all MBs dual
prediction, or per-MB single/dual prediction selection ("hybrid"), in
which case a single bit is coded per-MB to indicate whether the MB uses
single or dual inter prediction.
In the future, we can (maybe?) get further gains by mixing this with
Adrian's 32x32 work, per-segment dual prediction settings, or adding
support for dual splitmv/8x8mv inter prediction.
Gain (on derf-set, CQ mode) is ~2.8% (SSIM) or ~3.6% (glb PSNR). Most
gain is at medium/high bitrates, but there's minor gains at low bitrates
also. Output was confirmed to match between encoder and decoder.
Note for optimization people: this patch introduces a 2nd version of
16x16/8x8 sixtap/bilin functions, which does an avg instead of a
store. They may want to look and make sure this is implemented to
their satisfaction so we can optimize it best in the future.
Change-ID: I59dc84b07cbb3ccf073ac0f756d03d294cb19281
Resolved or factored out some further issues with Q index.
Put in a 3rd order polynomial instead of less accurate power function
as the best fit on gf and kf boost adjustment.
Added avg_q value to use instead of ni_av_qi.
Compute segment delta Q values based on avg_q.
Fixed bug in adjust_maxq_qrange().
The extended range Q on the derf set, using standard data rates
(which do not extend high enough to get big benefits) still show
a shortfall of between 0.5 and 1% though so there would appear to
be further issues that need to be tracked down.
Change-Id: Icfd49b9f401906ba487ef1bef7d397048295d959
Added two experimental options to the configure script:
1. newnear:
new scheme of doing mv encoding that include a motion vector from
last frame in nearest and near mv search
2. mulcontext:
tracks entropy context separately for regular frames and alt ref
frames.
Change-Id: If6e0d5d593351707b497a26eb6a763e080f77e6f
This commit added code to keep track of separate entropy contexts for
normal frames and alt ref frames. The underly assumption was that the
two type of frames have different entropy characteristics given they
typically have quite different quantization levels. By keeping entropy
contexts separate, it helps the entropy context distribution to be more
closely adapted to each frame type.
Tests on derf set showed a good and very consistent gain on all clips
on all metrics, avg psnr: 0.89%, overall psnr: 0.84% and ssim 0.93%.
http://www.corp.google.com/~yaowu/no_crawl/mulcontext.html
Change-Id: I15bc9697f6ff7829042911fe0c62930585d7e65d
This commit enabled the usage of 8x8 intra prediction modes on inter
frames. There are a few TODO items related to this: 1)baseline entropy
need be calibrated; 2)cost of UV need to be done more properly rather
than using decision only relying on Y; 3)Threshold for allowing picking
8x8 intra prediction should be lowered to lower than the B_PRED.
Even with all the TODOs, tests showed consistent gain on derf set ~0.1%
(PSNR:0.08% and SSIM:0.14%). It is assumed that 8x8 intra prediction
will help more on large resolution clips, especially with above TODOs
addressed.
Change-Id: I398ada49dfc32575cfab962a569c2885111ae3ba
Fixed some further QIndex related issues and replaced some tables
(eg zbin and rounding)
Also Added function (currently disabled by default) to populate the
main AC and DC quantizer tables. Using the original AC range the
resulting computed DC values give behavior broadly comparable
on the DERF set. That is not to say that the equations will hold good
over a more extended range. The purpose of this code is to make it
easier to experiment with further alterations to the Q range and distribution
of Q values plus the relative weights given to AC and DC.
The function find_fp_qindex() ensures that changes to the Q tables
are reflected in the value passed in to the first pass code.
Slight experimental adjustment to static segment Q offset.
Change-Id: I36186267d55dfc2a3d565d0cff7218ef300d1cd5
this commit is to add an variable in the macroblock level mode
info structure to track the transform size used in each MB, so
the information can be used later in the loop filter to change
how loop filter works on MBs with different transform sizes.
Change-Id: Id0eeaba6cc854c6d1be00ed8d237b3d9e250e447
Slight tweaks to the new minq equations to bring results more into line with
original lookup tables.
Change-Id: I969fc87d95912df549b6775e83ee2345e84d4da0
Fixed bug in firspass.c call to vp8_initialize_rd_consts()
This was passing in vp8_dc_quant(cm->base_qindex, cm->y1dc_delta_q)
instead of (cm->base_qindex + cm->y1dc_delta_q).
It just so happens that for the value 26 used for cm->base_qindex in the
unextended Q case, the two give similar results. However, when using
the extended Q range the two are very different.
Also added more stats output and partly disabled another broken feature.
Change-Id: Iddf6cf5ea8467c44b7c133f38e629f6ba6f2581e
This is an experiment to include a mv contribution from last frame to
nearest and near mv definition. Initial test showed some small though
consistent gain.
latest patch slightly better result ~.13%-~.18%.
TODO: the entropy used to encode the mode choice, i.e. the mv counts
based conditional distribution of modes should be re-collected to
reflect this change, it is expected that there is some further gain
from that.
Change-Id: Ief1e284a36d8aa56b49ae5b360c91419ec494fa4
This comitt brings accross changes from the public branch
commit number Icf74d13af77437c08602571dc7a97e747cce5066.
The main puurpose of this comit relates to CQ mode but it
also includes some refactoring of the two pass code which
I hope will make tuning the experimental branch for the new
quantizer range a little less painfull.
Change-Id: I278e989436a928fc1fe7761068960048f9d7a376
This commit resolves further QIndex look up tables to facilitate
experimentation with the quantizer range.
In some cases rather than remove the look up tables completely
I have created functions that are called once to populate them
using a formulaic approach base on the actual quantizer.
The use of these functions based on best fit of data from the original
tables does affect the results on some clips but across the derf test
set the effect was broadly neutral.
Change-Id: I8baa61c97ce87dc09a6340d56fdeb681b9345793
One of the problems arising when tweaking or adjusting the quantizer
tables is that there are a lot of look up tables that depend on the QINDEX.
Any adjustment to the link between QINDEX and real quantizer therefore tends
to break aspects of for example the rate control.
In this check in I have replaced several of the look up tables with functions that
approximate the same results as the old Q luts but use a formulaic approach
based on real Q values rather than QIndex. This should hopefully make it easier
to experiment with changes to the Q tables without always having to go through
and hand optimize a set of look up tables. Once things stabilize we may choose
to re-instate luts for the sake of performance.
Patch 2:
Addressed Ronald's comments.
vp8_init_me_luts() Added so luts only initialized once.
Change-Id: Ic80db2212d2fd01e08e8cb5c7dca1fda1102be57
Corrected dc lookup table to maintain ac/dc balance
close to what it was previously.
Firstpass not being passed the adjusted Q index for
the extended range.
Change-Id: Ic0200dabda445fea03bf81067999cb2670e99b77
