This patch sets up a quad_tree structure (pc_tree) for holding all of
pick_mode_context data we use at any square block size during encoding
or picking modes. That includes contexts for 2 horizontal and 2 vertical
splits, one none, and pointers to 4 sub pc_tree nodes corresponding
to split. It also includes a pointer to the current chosen partitioning.
This replaces code that held an index for every level in the pick
modes array including: sb_index, mb_index,
b_index, ab_index.
These were used as stateful indexes that pointed to the current pick mode
contexts you had at each level stored in the following arrays
array ab4x4_context[][][],
sb8x4_context[][][], sb4x8_context[][][], sb8x8_context[][][],
sb8x16_context[][][], sb16x8_context[][][], mb_context[][], sb32x16[][],
sb16x32[], sb32_context[], sb32x64_context[], sb64x32_context[],
sb64_context
and the partitioning that had been stored in the following:
b_partitioning, mb_partitioning, sb_partitioning, and sb64_partitioning.
Prior to this patch before doing an encode you had to set the appropriate
index for your block size ( switch statement), update it ( up to 3
lookups for the index array value) and then make your call into a recursive
function at which point you'd have to call get_context which then
had to do a switch statement based on the blocksize, and then up to 3
lookups based upon the block size to find the context to use.
With the new code the context for the block size is passed around directly
avoiding the extraneous switch statements and multi dimensional array
look ups that were listed above. At any level in the search all of the
contexts are local to the pc_tree you are working on (in?).
In addition in most places code that used to call sub functions and
then check if the block size was 4x4 and index was > 0 and return
now don't preferring instead to call the right none function on the inside.
Change-Id: I06e39318269d9af2ce37961b3f95e181b57f5ed9
There is no need to initialize source/dst frame buffers at frame
level. These will be done at block coding stage. This commit hence
removes the redundant operations.
Change-Id: I11d9f2556058c6205c8e58ed53e31f78622c41b7
This commit compares the current original frame to the previous
original frame at 64x64 block level and decides if the entire
block belongs to background area. If it is in the background area,
skip non-RD partition search and copy the partition types of the
collocated block in the previous frame.
For vidyo1 in the rtc set, this makes the speed -5 coding speed
about 8% faster. The overall compression performance is down by
1.37% for rtc set.
Change-Id: Iccf920562fcc88f21d377fb6a44c547c8689b7ea
Delete code relating to the old VP8_TUNE_SSIM flag
as this code does not currently work and is largely made
redundant in VP9 by the various AQ modes.
Change-Id: I71f28e1f680573d296422254489000678552b17b
With a more approriate one vp9_setup_src_planes() as only src buffer
pointers need to be initialized here.
Change-Id: I40fac4d8b2d39eb7d0c65b9b6afab45138a13936
Calculate the difference variance between last source frame and
current source frame. The variance is calculated at 16x16 block
level. The variances are compared to several thresholds to decide
final partition sizes.
An adaptive strategy is implemented to decide using
SOURCE_VAR_BASED_PARTITION or FIXED_PARTITION based on motions
in the video. The switching test is done once every
search_type_check_frequency frames.
The selection of source_var_thresh needs to be investigated
further later.
RTC set Borg test showed 0.424% overall psnr gain, and 0.357%
ssim gain. For clips with large enough static area, the
encoding speedup is around 2% to 15%.
Change-Id: Id7d268f1d8cbca7fb8026aa4a53b3c77459dc156
This commit allows the non-RD mode decision flow to select
prediction filter type in NEWMV mode. It provides 8.14% compression
performance gains in both settings of AQ=0 and 3. The current speed
impact is about 5% to 10% slower.
Change-Id: Id66ecebf77abd8f90fb3f6a066c0e8dfb4bf1c42
Copy up to a certain bsize, otherwise set to a fixed bsize.
This helsp to reduce artifact near moving boundary caused by full partition
copy without checking motion of super-block.
This artifact can occur at speeds 3,4 in real-time mode.
Issue: https://code.google.com/p/webm/issues/detail?id=738.
Change-Id: I05812521fd38816a467f72eb6a951cae4c227931
Turns off the DISABLE_RC_LONG_TERM_MEM macro and makes other changes
in the way the bits are updated, to make 2-pass rate control track
target bitrates closer.
Change-Id: I5f3be4b11c2908e6a9a9a1dd4fcf4e65531c44d8
This commit optimizes the bit allocation for the non-RD coding flow.
It applies slightly better quantizer to the frames, where all blocks
run a non-RD partition search. Such frames typically have better
rate-distortion trade off, thus improving the reconstruction quality
for next few frames reference at reasonably low increment in rate
cost.
The coding performance for rtc set at speed -5 with error-resilient
tuned on and rate control set as cbr is improved by 19.58%. It improved
the coding speed by about 10% for a portion of local test clips.
Change-Id: I9d56696cd4359dc8136ca10aff10fff05aaa2686
This commit enables the non-RD mode decision coding flow to
adaptively apply partition search in non-refresh frame, when the
collocated block in previous frame suggests there might be a motion
activity. It refactors the update_state_rt() function to support
buffer swap of mode_info struct, thereby unifying the encoding
stage across various non-RD coding modes.
It provides 5% compression performance gains in speed -6 for rtc
test set, at about 12% speed slow down.
Change-Id: Iefa374aed5a11c4b7ff9a3ed36a98ea8bd184edb
Fix so that vp9_update_segment_aq() will use the correct (i..e, chosen)
encoding mode (from ctx struct) in update_state.
Change-Id: Icc4b66f3935fad5ec4516a4d57e843d12c365e64
This commit allows the recursive non-RD partition search to early
terminate sub search tree when the cumulative rate-distortion is
already above the best available.
Change-Id: Ifdbcbb4bee229f47fde3033200829577c9f1fc1d
This commit added a speed feature to make the logic of calculating
skip_recode on a block level more explicit. This also enable the
feature to be enabled at speed 5 where the previous logic is too
conservative, help gain back the lost speed for --rt(-5).
Change-Id: Ieb37ca3e85c2e7bda343486edf13d5f5395f2233
There were a few conflicts between the new non-RD partition search
and recent clean-up patches, which were not caught by git control.
This commit fixed these issues.
Change-Id: Ieebefbd6c19d81d0d13e3c568877d5cce2ab7797
This commit takes out the if statements on using adaptive motion
search flag. This feature is automatically enabled in non-RD mode
decision flow for variable partition types search.
Change-Id: I5a25cf9109d84d07aa61b3e02c8d32dda1e90cb0
This commit enables a recursive partition type search for non-RD
mode decisions. It allows the encoder to choose variable block
sizes in a 64x64 block based on rate-distortion modeling.
It improves speed -6 coding efficiency for rtc set by 2.4%. Most
of the gains come from 32-40dB range, where many sequences gain
about 5% to 20%. Local tests suggest there is no speed change.
Change-Id: I06300016e500a21652812b7b3b081db39a783d66
This commit reformats non-RD coding flow layout to allow mode
decision with fixed and variable block sizes.
Change-Id: I2cdd3bb9f26c499ee4a9849004fd925cdd195d09
The flag x->skip_recode interacts badly with
the cpi->sf.use_nonrd_pick_mode and
cpi->sf.skip_encode_sb speed settings.
Restricting the use of the skip_decode flag when
these other speed choices are in use helps quality
for speeds 3 and 4 by a large amount with only a
small impact on speed.
Average improvmentes for 2 pass speed 4:
Derf +8.8%
Yt + 10.53%
Std-Hd +6.95%
yt-hd + 22.95%
Change-Id: I8010876d8012042a11077c92e69d813c3dfa58eb
This is an initial attempt to allow variable block size partition
in non-RD coding flow. It tests 8x8, 16x16 and 32x32 block size per
64x64 block, all using non-RD mode decision and the associated rate
distortion costs from modeling, then selects the best block size to
encode the entire 64x64 block. Such operations are triggered every
other 3 frames. The blocks of intermediate frames will reuse the
collocated block's partition type.
It improves the compression performance by 13.2%. Note that the gains
are not evenly distributed. For many hard clips, the compression
performance is improved by 20% to 28%. Local speed test shows that
it will also increase runtime by 50%, as compared to speed -7. It is
now enabled in speed -6 setting.
Change-Id: Ib4fb8659d21621c9075b3c369ddaa9ecb0a4b204
The use of uninitialized skip flag will trigger inconsistency in
coding statistics, when alternate RD and non-RD coding modes are
enabled. This commit fixes this issue and removes unnecessary if
statements from update_state_rt.
Change-Id: I7d549dcb0e3ef48b999e5bbc78174ba84502cfcf
