add a dependency on *_rtcd.h to ensure they're generated before
attempting to build the test files
Change-Id: Ibbbd1f6ea77912bfd297129e7c83b9a80923ea12
fails unit tests:
[ FAILED ] NEON/VP8SubpelVarianceTest.ExtremeRef/0, where GetParam() = (3, 3, 0x14e36d, 0)
[ FAILED ] NEON/VP8SubpelVarianceTest.Ref/0, where GetParam() = (3, 3, 0x14e36d, 0)
the tests were recently enabled in:
eb88b17 Make vp9 subpixel match vp8
the functions likely haven't changed since being converted from assembly
Change-Id: I6141717b111b8f735f436c160d74270af53ef722
This control allows the application to skip the loop filter in the
decoder. This is an advanced control that should only be used in
extreme circumstances as it may introduce and accumulate decode
artifacts.
Change-Id: I278c65c60826f84c9141ebe06c6eeed3c2335fa8
WebM files will adjust the display width and height according to the
input pixel aspect ratio. The default pixel aspect ratio is 1:1.
BUG=https://code.google.com/p/webm/issues/detail?id=1005
Change-Id: I23e0a601b7259fa9513cb86110c41b8437769808
The only difference between the two was that the vp9 function allowed
for every step in the bilinear filter (16 steps) while vp8 only allowed
for half of those. Since all the call sites in vp9 (<< 1) the input, it
only ever used the same steps as vp8.
This will allow moving the subpel variance to vpx_dsp with the rest of
the variance functions.
Change-Id: I6fa2509350a2dc610c46b3e15bde98a15a084b75
Updated sources according to improved version of common MSA macros.
Enabled respective convolve MSA hooks and tests.
Overall, this is just upgrading the code with styling changes.
Change-Id: If5ad6ef8ea7ca47feed6d2fc9f34f0f0e8b6694d
The larger internal variables are required for the intermediates
but RoundHighBitDepth brings them down to uint32_t/unsigned int.
Fixes type warnings in visual studio.
Change-Id: I48d35284d6cbde330ccdc1f46b6215a645d5eb00
Updated sources according to improved version of common MSA macros.
Enabled idct MSA hooks and tests.
Overall, this is just upgrading the code with styling changes.
Change-Id: I1f488ab2c741f6c622b7a855388a202168082209
Done little restructuring/styling changes to the sources like generic macro definitions, their use to reduce code lines, better code alignments etc.
Disabled all MSA hooks and tests
Change-Id: Ic6f2dce0b501f46b80c06c46c0fe2043d557b190
ROUND_POWER_OF_TWO has some poor side effects when used
with [u]int64_t such as doing the shifting in 32bits.
Change-Id: Ic85a19765cd316fb43657cb21c86f35ceb772773
Various header/test files had to be re-worked in order to
build "Remove cm parameter from vp9_decode_block_tokens()".
This patch reverts the "Remove cm" part and only contains
the re-worked header files.
Change-Id: I520958a88d1991fee988a3c784d0eac40e117a32
this allows test_libvpx's simd caps check to be used; it also fixes a
link error on OS X with -fcommon.
Change-Id: I1a62a3e74ba06b8f3b37a22fcfdebf90c04ab289
in addition to <arch>/*. this will pick up tests defined with TEST()
instead of INSTANTIATE_TEST_CASE_P()
Change-Id: I0917741baac89d9ce857f4d4aa53790e8a0c6c12
useful for speed testing / verifying individual function optimizations;
currently tests non-high-bitdepth VP9 intra predictors
Change-Id: Ibd247765e43a31894697d43f1d39d312e0ba2090
With the sad functions, and hopefully the variance functions soon,
moving to the vpx_dsp location, place the defines used in the
reference C code in a common location.
Change-Id: I4c8ce7778eb38a0a3ee674d2f1c488eda01cfeca
this macro was used inconsistently and only differs in behavior from
DECLARE_ALIGNED when an alignment attribute is unavailable. this macro
is used with calls to assembly, while generic c-code doesn't rely on it,
so in a c-only build without an alignment attribute the code will
function as expected.
Change-Id: Ie9d06d4028c0de17c63b3a27e6c1b0491cc4ea79
Create a new component, vpx_dsp, for code that can be shared
between codecs. Move the SAD code into the component.
This reduces the size of vpxenc/dec by 36k on x86_64 builds.
Change-Id: I73f837ddaecac6b350bf757af0cfe19c4ab9327a
The rotation computation using 2X of cos(pi/16) has a potential to
overflow 32 bit, this commit disable the function to allow further
investigation and optimization.
Change-Id: I4a9803bc71303d459cb1ec5bbd7c4aaf8968e5cf
The version is currently producing different result from c version
for some input. Disable the use of it for now to allow time for
investigation the source of mismatch.
Change-Id: Id039455494ee531db4886a9f1fa4761174ef6df3
This partially reverts commit 14ef4aeafb
Including the rtcd headers to get the function definitions causes
problems on VS9.
Change-Id: I780874d9e03af2d3124192ab0e3907301f22674c
add a check for the status line to awk and better report failure given
the program output will be lost in this case
Change-Id: I1348a80108c81099d609f2e2227dd2c31bd8cd54
Reset the reached_eos flag in webm_guess_framerate in case it ends
up consuming the entire file. Also adding a vpxdec shell test to
verify this behavior.
Change-Id: I371eebd2105231dc0f60e65da1f71b233ad14be5
The following functions use the count parameter to either loop or select
dedicated paths:
vp9_lpf_horizontal_16_c
vp9_lpf_horizontal_16_sse2
vp9_lpf_horizontal_16_avx2
vp9_lpf_horizontal_16_neon
vp9_highbd_lpf_horizontal_16_c
vp9_highbd_lpf_horizontal_16_sse2
Change-Id: I7abfd2cb30baa292b4ebe11c847968481103c037
the TODO around CONFIG_SPATIAL_SVC has been resolved by changing the
CONFIG_* checks to use an ABI based check
Change-Id: If2638baf361b863186177a453beec9af9231e69e
this removes the CONFIG_* checks from public headers, but means
'--enable-experimental --enable-spatial-svc' builds will fail without a
local change to the ABI in vpx_encoder.h. this should be all right for
testing this experiment.
Change-Id: Ief55e7b9d1e8332cfce990275e04c29b30af0c4a
add explicit returns in cases where ASSERT_* can't be used due to the
function returning a value; retain the EXPECT_* for reporting purposes.
Change-Id: I1f514728537fee42a99277d3aba538e832d3b65b
Crash occured on very first key frame, because denoiser
temporal function was beng entered.
Updated denoiser unittest to set cpu_used from first frame,
and verified fix fixes the crash.
Change-Id: I3be1124b52846fbbe7248d2c3d6136e086c80bc1
both the encode and decode perf tests require niklas_1280_720_30.yuv
broken since:
28eebf3 Merge "tests: add a shorter 720p test clip"
7839d03 tests: add a shorter 720p test clip
Change-Id: I51ebbf7261832e25d8f2c1da5c7df5c2e47f748e
+ add a helper function to reduce the duplication
this is a bit clearer when the environment variable is set, but the
directory is missing
Change-Id: I08f9b56122b5741bb40a5f795f7f82f5b49f1047
niklas_1280_720_30.y4m 60 frames @ 30fps
only a small number of frames are being used; this reduces the test data
download size in non-perf-test cases by >500M.
retain niklas_1280_720_30.yuv for encode+decode perf tests
Change-Id: I56b3433104acd462f952a9554280de5a3ec0b6d2
Modified the thresholds of deciding whether or not to skip
the transforms in model_rd_for_sb_y(). Used zbin[] instead
of dequant[] to be more precise. Also, modified the checking
coditions.
Rtc set borg test results (at speed 6) showed:
average PSNR gain: 0.138%, overall PSNR gain: 0.158%,
and SSIM gain: 0.177%.
The data rate test was modified slightly as suggested by
Marco.
Change-Id: Ieaf633ab77f4838cb3c45cf69065b29d55f8ae6c
There is a corner case that when a frame is corrupted, the following
inter frame decode worker will miss the previous failure. To solve
this problem, a need_resync flag needs to be added to master thread
to keep control of that.
Change-Id: Iea9309b2562e7b59a83dd6b720607410286c90a6
use VP[89]_INSTANTIATE_TEST_CASE case when possible to disable the tests if
the codec is unavailable.
broken since:
be6aead Try again to merge branch 'frame-parallel' into master branch.
Change-Id: I8d81c5ba3b951f82be94bfaed6be194e4289baec
cm->frame_bufs[].idx values were made consistent in:
61c5e94 Use -1 consistently as invalid buffer idx
update the initialization in swap_frame_buffers() to match.
additionally:
- remove some shadowed variables in the former and marked them volatile
Change-Id: Ie3f9636c405bd822112bb56bd22d28024ae98909
In frame parallel decode, libvpx decoder decodes several frames on all
cpus in parallel fashion. If not being flushed, it will only return frame
when all the cpus are busy. If getting flushed, it will return all the
frames in the decoder. Compare with current serial decode mode in which
libvpx decoder is idle between decode calls, libvpx decoder is busy
between decode calls.
Current frame parallel decode will only speed up the decoding for frame
parallel encoded videos. For non frame parallel encoded videos, frame
parallel decode is slower than serial decode due to lack of loopfilter
worker thread.
There are still some known issues that need to be addressed. For example:
decode frame parallel videos with segmentation enabled is not right sometimes.
* frame-parallel:
Add error handling for frame parallel decode and unit test for that.
Fix a bug in frame parallel decode and add a unit test for that.
Add two test vectors to test frame parallel decode.
Add key frame seeking to webmdec and webm_video_source.
Implement frame parallel decode for VP9.
Increase the thread test range to cover 5, 6, 7, 8 threads.
Fix a bug in adding frame parallel unit test.
Add VP9 frame-parallel unit test.
Manually pick "Make the api behavior conform to api spec." from master branch.
Move vp9_dec_build_inter_predictors_* to decoder folder.
Add segmentation map array for current and last frame segmentation.
Include the right header for VP9 worker thread.
Move vp9_thread.* to common.
ctrl_get_reference does not need user_priv.
Seperate the frame buffers from VP9 encoder/decoder structure.
Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:"""
Conflicts:
test/codec_factory.h
test/decode_test_driver.cc
test/decode_test_driver.h
test/invalid_file_test.cc
test/test-data.sha1
test/test.mk
test/test_vectors.cc
vp8/vp8_dx_iface.c
vp9/common/vp9_alloccommon.c
vp9/common/vp9_entropymode.c
vp9/common/vp9_loopfilter_thread.c
vp9/common/vp9_loopfilter_thread.h
vp9/common/vp9_mvref_common.c
vp9/common/vp9_onyxc_int.h
vp9/common/vp9_reconinter.c
vp9/decoder/vp9_decodeframe.c
vp9/decoder/vp9_decodeframe.h
vp9/decoder/vp9_decodemv.c
vp9/decoder/vp9_decoder.c
vp9/decoder/vp9_decoder.h
vp9/encoder/vp9_encoder.c
vp9/encoder/vp9_pickmode.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_cx_iface.c
vp9/vp9_dx_iface.c
This reverts commit a18da9760a.
Change-Id: I361442ffec1586d036ea2e0ee97ce4f077585f02
On Nexus 7 speed -6 saw ~18% increase in perf.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
BUG=https://code.google.com/p/webm/issues/detail?id=908
Change-Id: I70ccdea0326750552ed946fb004507d6efe02d5c
On Nexus 7 speed -6 saw ~15% increase in perf.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
BUG=https://code.google.com/p/webm/issues/detail?id=908
Change-Id: I4b2006b644c488f42bf06d8a22ef0e6120a96bf9
On Nexus 7 speed -6 saw ~30% increase in perf.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
BUG=https://code.google.com/p/webm/issues/detail?id=908
Change-Id: Id12af7d1883243c23e6692e898aea82299633d58
In frame parallel decode, libvpx decoder decodes several frames on all
cpus in parallel fashion. If not being flushed, it will only return frame
when all the cpus are busy. If getting flushed, it will return all the
frames in the decoder. Compare with current serial decode mode in which
libvpx decoder is idle between decode calls, libvpx decoder is busy
between decode calls. VP9 frame parallel decode is >30% faster than serial
decode with tile parallel threading which will makes devices play 1080P
VP9 videos more easily.
* frame-parallel:
Add error handling for frame parallel decode and unit test for that.
Fix a bug in frame parallel decode and add a unit test for that.
Add two test vectors to test frame parallel decode.
Add key frame seeking to webmdec and webm_video_source.
Implement frame parallel decode for VP9.
Increase the thread test range to cover 5, 6, 7, 8 threads.
Fix a bug in adding frame parallel unit test.
Add VP9 frame-parallel unit test.
Manually pick "Make the api behavior conform to api spec." from master branch.
Move vp9_dec_build_inter_predictors_* to decoder folder.
Add segmentation map array for current and last frame segmentation.
Include the right header for VP9 worker thread.
Move vp9_thread.* to common.
ctrl_get_reference does not need user_priv.
Seperate the frame buffers from VP9 encoder/decoder structure.
Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:"""
Conflicts:
test/codec_factory.h
test/decode_test_driver.cc
test/decode_test_driver.h
test/invalid_file_test.cc
test/test-data.sha1
test/test.mk
test/test_vectors.cc
vp8/vp8_dx_iface.c
vp9/common/vp9_alloccommon.c
vp9/common/vp9_entropymode.c
vp9/common/vp9_loopfilter_thread.c
vp9/common/vp9_loopfilter_thread.h
vp9/common/vp9_mvref_common.c
vp9/common/vp9_onyxc_int.h
vp9/common/vp9_reconinter.c
vp9/decoder/vp9_decodeframe.c
vp9/decoder/vp9_decodeframe.h
vp9/decoder/vp9_decodemv.c
vp9/decoder/vp9_decoder.c
vp9/decoder/vp9_decoder.h
vp9/encoder/vp9_encoder.c
vp9/encoder/vp9_pickmode.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_cx_iface.c
vp9/vp9_dx_iface.c
Change-Id: Ib92eb35851c172d0624970e312ed515054e5ca64
On Nexus 7 speed -5, -6, -7, and -8 saw about a 1% increase
in perf for 480p. Speeds -5, -6, -7, and -8 saw about a 1.5%
increase in perf for 720p.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
Change-Id: Ibf17ebfd952a6aec941719bd8306df8ec4574bee
This commit adds encoder side control for vp9 to set color space info
in the output compressed bitstream.
It also amends the "vp9_encoder_params_get_to_decoder" test to verify
the correct color space information is passed from the encoder end to
decoder end.
Change-Id: Ibf5fba2edcb2a8dc37557f6fae5c7816efa52650
On Nexus 7 speed -5, -6, -7, and -8 saw about a 15% increase
in perf for 480p. Speeds -5, -6, -7, and -8 saw about a 10%
increase in perf for 720p.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
Change-Id: I2fa5315845e3021c9a6e2ea47e52e68b398d8334
This commit added a field to vpx_image_t for indicating color space,
the field is also added to YUV_BUFFER_CONFIG. This allows the color
space information pass through the decoder from input stream to the
output buffer.
The commit also updated compare_img() function with added verification
of matching color space to ensure the color space information to be
correctly passed from encode to decoder in compressed vp9 streams.
Change-Id: I412776ec83defd8a09d76759aeb057b8fa690371
Add optimized Neon functions of:
vp9_variance32x64
vp9_variance64x32
vp9_variance64x64
On Nexus 7 speed -5 and -6 saw about a 4% increase in perf.
Speeds -7 and -8 saw about a 6% increase in perf.
Tested on Nexus 7, built with ndk r10d, gcc 4.9.
Change-Id: I5a81f13c9897eb927fa39662530f5524a0f768fa
The denoiser sensitivity level should be set to 1 starting from
key frame. The internal function of denoiser should make the
temporal denoising operations cut off in key frame coding.
Change-Id: Id3e704a73e98e4ea801284a2cbbab2ea9c371d23
VP9FrameSizeTestsLarge.OneByOneVideo has been causing a failure in
jenkins libvpx__unit_tests-valgrind_long for "using of uninitialized
memory", the root cause was that the input image for this test was
not initialized with proper size, therefore plan U and V were not
initialized at all.
This commit fixes the size initialization, and resolves the issue.
Change-Id: Ic4dd1542b7bb0cb260a1e0aeeb505db21ae5edc8
This allows us to track decode speed for new encodes so that we catch
problems like an encode change that makes decode really slow.
Change-Id: I7210196415c4e53d455e9c81246d9fb324913a06
Encode the files with 1, 2, and 4 threads.
Explicitly turn on error resilient and frame parallel
decoding and turn off altref frames.
Change-Id: I02b66f72b7d35c666c3ba685b33015508e440209
The unit tests for VP9 multi-threaded encoder are added, which
carry out tests for all three modes(i.e. kTwoPassGood, kOnePassGood
and kRealTime), and speeds ranging from 1 to 8. A 1280x720 test
clip is used, which is encoded into multiple tiles. The number of
threads is num_of_tiles.
Change-Id: I04419eeca145ad841c9c527603668239a82e7fbd
The encoder initialization is called in EncodeFrame(). Therefore,
in the unit tests, the set control is done when video->frame() is 1.
This didn't cause problem since current tests mainly test lag_frame
> 0 case, or no encoding option that needs to allocate memory before
1st frame is used. If use lag_frame = 0 and encoding multiple tiles,
the unit tests crash. The issue is fixed by doing the initialization
before encoding frames.
Change-Id: I43102048f88448bcf27e9c60e0ec06c176b02e5c
Add vp9_iht8x8_add_neon.c
- vp9_iht8x8_64_add_neon
The assembly did not previously implement tx_type 0
BUG=716
Change-Id: Icfc99dd24f3d59047f9184a7d0c761ba7e3de934
Signed-off-by: James Yu <james.yu@linaro.org>
Add vp9_iht4x4_add_neon.c
- vp9_iht4x4_16_add_neon
The assembly did not previously implement tx_type 0
BUG=715
Change-Id: I60034d1568de034edba45c5cdd13f3d87dbc73b6
Signed-off-by: James Yu <james.yu@linaro.org>
Fails to compile. Bad calls to vp9_alloc_frame_buffer
and vp9_realloc_frame_buffer in postproc.c
This reverts commit 399823b6f5.
Change-Id: I29f0e173f8e185d3a303cfdb17813e1eccb51e3a
Add support for setting byte alignment on the Y, U, and V plane of the
reference buffers. The byte alignment must be a power of 2, from 32 to
1024. A value of 0 sets legacy alignment.
Change-Id: I7c1399622f7aa68e123646369216b32047dda73d
Assembly tests should clear system state, as we have no
expectation of proper system state in between test runs..
Change-Id: I0f591996c1f17ef2a5a8572a6b445f757223a144
This allows us to track decode speed for new encodes so that we catch
problems like an encode change that makes decode really slow.
Change-Id: I92251a8b1f710b241f66e1042413df1b71b76038
Adds decoder config as a changeable parameter to unit tests, and
changes end to end test to use commonly used parameters to enable
base test of tiles encoding and frame parallel decoding.
Change-Id: I5d23a6857303b4d68b92b15c3f2f04a1bcb4c2bb
the gtest implementation used only returns values between 0 and 2^31-1
+ temporarily disable some tests in fdct8x8_test which misbehave with the
new range
Change-Id: I45381076f0bea3317cc6728305890e4fd2f2facd
the gtest implementation used only returns values between 0 and 2^31-1
+ temporarily disable some tests in lpf_8_test which misbehave with the
new range
Change-Id: I8a026680c4b8c12dc14d4f24c33edb2315963114
For key frame at speed 6: enable the non-rd mode selection in speed setting
and use the (non-rd) variance_based partition.
Adjust some logic/thresholds in variance partition selection for key frame only (no change to delta frames),
mainly to bias to selecting smaller prediction blocks, and also set max tx size of 16x16.
Loss in key frame quality (~0.6-0.7dB) compared to rd coding,
but speeds up key frame encoding by at least 6x.
Average PNSR/SSIM metrics over RTC clips go down by ~1-2% for speed 6.
Change-Id: Ie4845e0127e876337b9c105aa37e93b286193405
Also removes some spurious changes in common/vp9_blockd.h which
was introduced by a rebase issue between nextgen and master branches.
Change-Id: If359f0e9a71bca9c2ba685a87a355873536bb282
(cherry picked from commit 005d80cd05)
(cherry picked from commit 08d2f54800)
(cherry picked from commit 4230c2306c)
This commit makes the codec automatically turn on error resilient
mode when using real-time mode for temporal scalable coding. It
fixes an enc/dec mismatch issue and re-enables the corresponding
unit test.
Change-Id: Ie1f7134e9a78ddd43e9b1555b3ee991c8a3afd0d
A hidden enc/dec mismatch bug was accidentally triggered by
https://gerrit.chromium.org/gerrit/#/c/72247/
Adaptively adjust mode test kick-off thresholds in RTC coding
This commit temporarily turns off the broken unit tests to avoid
blocking other CLs while fixing.
Change-Id: I0a0f195030321190ce10879cd833187680576367
previously 'bit_depth_', which is later used to calculate 'mask_', would
be left uninitialized in non-high-bitdepth builds
Change-Id: Ia72035f4645baf3bb0f191504f491b934cdf1e0e
By using 0xff for a short it was not setting the high bits. When
comparing the output with vtst to find non-zero elements it was skipping
vaules which had no low bits set such as -512 / 0xFE00.
Using -8191 as the first element of coeff will generate this condition.
BUG=883
Change-Id: Ia1e10fb809d1e7866f28c56769fe703e6231a657
this was incorrectly set in test.mk by
93ffd37 Enable and fix resize_test for VP9
the test is now available when using --disable-vp9
Change-Id: I6acf44b0de647b34812ef5e18fd96447cdf9b25d
worker hooks return false on error, fix the assignment in Execute() used
in the TestSerialInterface test
Change-Id: I93c2e45f270330ae6d35a3a303411c4ee0f31337
A flush bug is discovered during putting frame parallel decoder
into Android. This test will expose that bug.
Change-Id: Ia047f27972f4da0471649f79f1f91e7695297473
This reverts commit 7d07f512cd.
this breaks visual studio builds:
'#' : invalid character : possibly the result of a macro expansion
Change-Id: I77170d549afb71e75a878fa0f6acd204fe8d9e67
The obj_int_extract code is no longer worth maintaining. It creates
significant issues when adapting for different build systems and no
longer offers as significant of a performance benefit due to
improvements in intrinsics.
Source files will remain until the various third-party builds are updated.
The neon fast quantizer has been moved to intrinsics. The armv6 version
has been removed because so few remaining targets require it.
Compilers and processors have improved significantly since the
pack_tokens code was written. The assembly is no longer faster than the
C code.
pack_tokens were the only optimizations for the armv5te targets so the targets
will be removed after the test infrastructure has been updated.
BUG=710
Change-Id: Ic785b167cd9f95eeff31c7c76b7b736c07fb30eb
This patch was to fix the vpxdec fuzzing3 test failure. When an
error occurs, setjmp() is invoked, which calls the decoder
removing routine. In multiple thread situation, other threads
could try to access the frame context memory that is already
deallocated, thus causing a segfault.
An invalid unit test was added for this issue.
Change-Id: Ida7442154f3d89759483f0f4fe0324041fffb952
the offending assembly code was deleted in:
08e38f0 VP8 for ARMv8 by using NEON intrinsics 14
the intrinsics currently pass.
fixes issue #725
Change-Id: I43e4263bef21f9d9008c51ffdfa39fcf10b8e776
The test filter is not a prefix matcher. It requires test type to
contain no more than the optimization type. In this example, SSSE3_64
fails to match and the test is not skipped even when SSSE3 is not
available.
Change-Id: Ia74229a167c88da4e6da169012a7a77d438c3f75
In the function mb_lpf_horizontal_edge_w_avx2_16 the usage of the intrinsic
_mm256_cvtepu8_epi16 cause a compiler bug in gcc 4.9.1.
until it will be fixed I created a workaround that create the up convert by
using broadcast128+shuffle.
The bug was reported here:
https://code.google.com/p/webm/issues/detail?id=867
Change-Id: I73452e6806f42e0fadcde96b804ea3afa7eeb351
All sad function that process above 32 consecutive elements are optimized
for AVX2:
vp9_sad64x64
vp9_sad64x32
vp9_sad32x64
vp9_sad32x32
vp9_sad32x16
vp9_sad64x64_avg
vp9_sad64x32_avg
vp9_sad32x64_avg
vp9_sad32x32_avg
vp9_sad32x16_avg
The functions that appeared as a hotspot is vp9_sad32x32 and vp9_sad64x64
vp9_sad32x32 was optimized by 68% and vp9_sad64x64 was optimized by 90%
both of them gave and overall ~2.3% user level gain
Change-Id: Iccf86b375a2b54c5fbbe685902ead0c9a561b9fd
Covers all profiles and input formats. The tests check if the
encode succeeds and if the psnr is sane.
Change-Id: I195a5330debf92562846121819b6eaf961e27c01
We encode a empty invisible frame in front of the base layer frame to
avoid using prev_mi. Since there's a restriction for reference frame
scaling factor, we have to make it smaller and smaller gradually until
its size is 16x16.
Change remerged.
Change-Id: I9efab38bba7da86e056fbe8f663e711c5df38449
We encode a empty invisible frame in front of the base layer frame to
avoid using prev_mi. Since there's a restriction for reference frame
scaling factor, we have to make it smaller and smaller gradually until
its size is 16x16.
Change-Id: I60b680314e33a60b4093cafc296465ee18169c19
Add a test vector to show the cases where segmentation map is preserved
from frome to frame as outlined in the inquiry in issue 761.
Change-Id: I630c6aba27d0d0b109cc7fd7c6fcd008222a0cf3
The concept:
There's too much noise in source pixels for variance and at low bitrate
the reconstructed looks nothing like the source so we have problems
getting good partitionings with either. This skirts the issue by using
a box blur scaled down version for variance calculations. To compare
against source_var_ moved keyframe to be rd based like source_var.
Change-Id: Ie3babdbfadae324b7b5a76bea192893af27f0624
This SSE2 is based on VP8 denoiser's SSE2 code. In VP8, there are
only 16x16 blocks in denoiser, while in VP9, there are 13 different
block sizes.
By adding this SSE2 code, the improvement of encoder speed is around
20%(using C code vs using SSE2 code), vary for different clips.
The unit test for VP9 denoiser is to confirm that the SSE2 code is
bit-exact with the C code. The unit test covers all block size.
Change-Id: Ic8d8ac26db4ea40a5f146b5678a065af07eaaa3d
Incorporates the WRAPLOW macro into the non-highbitdepth transforms
to aid hardware verification between a software C model and an
intended hardware implementation though the use of the configure
options: --enable-experimental --enable-emulate-hardware.
Note that to avoid further discrepancies between the sse/sse2
implementations of the transforms and the C implementation, when the
emulate hardware option is invoked, we also disable sse/sse2/etc.
Also incudes some minor cleanups/renaming etc.
Change-Id: Ib864d8493313927d429cce402982f1c8e45b3287
vpx_svc_parameters_t contains id, resolution and min/max qp for each spatial layer.
In this change we will use extra config to send min/max qp and scaling factors, then calculate layer resolution inside encoder.
Change-Id: Ib673303266605fe803c3b067284aae5f7a25514a
In many tests in VP8, the denoiser is disabled. By adding this
conditional comilation macro, the unit test will not be included
when denoiser is not enabled.
Change-Id: I6edec85c996acca22aacd11161c52408be2660a3
1. This is to align with the ffmpeg implementation
2. Remove APIs for setting quantizers and scale-factors
Change-Id: I6e238d71db790a9fb3254baaeb61e2a5aac58f48
Libvpx was memseting every external frame buffer before decode. This
was to work around a valgrind issue in our C loop filter. Most of
the time this was not needed and we have noticed some significant
performance loss on some platforms. Now we require the application to
zero out the buffers if it is using external frame buffers.
Change-Id: I7330d00a315e65137ed30edd5f813e8929b76242
Adds various high bitdepth transform functions and tests.
Much of the changes are related to using typedefs tran_low_t
and tran_high_t for the final transform cofficients and intermediate
stages of the transform computation respectively rather than fixed
types int16_t/int. When vp9_highbitdepth configure flag is off,
these map tp int16_t/int32_t, but when the flag is on, they map
to int32_t/int64_t to make space for needed extra precision.
Change-Id: I3c56de79e15b904d6f655b62ffae170729befdd8
If optimizations use more than one cpu feature, allow
specifying them so that '--disable-X' still works
https://code.google.com/p/webm/issues/detail?id=854
Change-Id: I3108ea37b397371a2be84dd5f2380b304db23f18
1. svc_encodeframe.c will not handle frame or stats packets anymore.
The app will process them.
2. Remove APIs that related to these packets.
Change-Id: Id0d7f8b458dc09c6f77064c0878fd4e572db001b
don't bother decoding any further after receiving an earlier decode
error until a key/intra-only frame is encountered.
Change-Id: I381917b70d7a9e6f8d6de42e3d181bb113a4cec4
allocations within vp9_alloc_context_buffers() rely on mi_rows/mi_cols
individually, use those to determine whether to realloc rather than
stride and stride * rows. this fixes a crash with some fuzzed files for
invalid accesses into last_frame_seg_map and above_context.
Change-Id: I7b9f40dcf170d443890f3bd2acd285507943c7d4
proceeding using a corrupt (incompletely decoded) frame reference may
lead to incorrect assumptions about allocation sizes leading to a crash.
Change-Id: I76e74f2e1be127c2e2c7e1174bb3307497dfd23d
Calling Reset(int) method instead of overloaded operator()(int).
Adding underscore at the end of class member name.
Change-Id: I01934e7bc056d4b594e5d05d693328febd34ac3c
vp8_build_intra_predictors_mbuv_s().
This patch replaces the assembly version with an intrinsic
version.
On a Nexus 7, vpxenc (in realtime mode, speed -12)
reported a performance improvement of ~2.6%.
Change-Id: I9ef65bad929450c0215253fdae1c16c8b4a8f26f
Adds config parameter vp9_highbitdepth, to support highbitdepth profiles.
Also includes most vpx level high bit-depth functions. However
encode/decode in the highbitdepth profiles will not work until
the rest of the code is in place.
Change-Id: I34c53b253c38873611057a6cbc89a1361b8985a6
It's built based on current spatial svc code.
We only support one spatial two temporal layers at this time.
Change-Id: I1fdc8584354b910331e626bfae60473b3b701ba1
store the number of allocated rows in VP9LfSync, the calculated values
can not be relied on when dealing with corrupt material.
Change-Id: I13b8bcec9738c299a71df726772ab7ac05511e5b
attempting to decode a frame after the previous frame failed has the
potential of interrupting an earlier loop filter task
Change-Id: I6f2b1ddcdf5b89c3e2ee8caf5289dada2a087d66
if the first frame was corrupt and loop filter not called, the next call
would assume the necessary allocations had been done and segfault when
accessing a NULL pointer
Change-Id: Ib6ef505e5c594e6f0fe65ab0700172bcf06b92a6
We can use one frame context for each layer so that we don't have
to reset the probs every frame. But we can't use prev_mi since we
may drop enhancement layers. So we have to generate a non vp9
compatible bitstream and modify it in the player.
1. We need to code all frames as invisible frame to let prev_mi
not to be used. But in the bitstream we need to code the
show_frame flag to 1 so that the publisher will know it's
supposed to be a visible frame.
2. In the player we need to change the show_frame flag to 0 for
all frames. Then add an one byte frame into the super frame
to tell the decoder which layer we want to show.
Change-Id: I75b7304cf31f0ab952f043e33c034495e88f01f3
1. Clean the code for encode frame tests
2. Add encode w/ and w/o alt reference frame test
3. Add encode SNR layers test
4. Add encode multiple layers but decode partial layers test
Change-Id: Ibd2c9bc02525db584a6f931a98405f2d851b3cd6
There are two CreateDecoder functions and decode_test_driver is not
calling the right function now. This bug is discovered during really
enable the frame parallel flag inside libvpx. This bug does not affect
any existing unit test though.
Change-Id: Icd9633c4b66d50e422a09c4310ff791082878936
- Fix nit: make test function definitions match test order.
- Fix nit: use elog instead of echo for env verification error.
Change-Id: I0eec078fc056a5bb2bd88d5833e43de48d77ec08
this test allocates >2GB currently. depending on the order of the test
runs the allocation may fail most regularly with mingw+wine.
Change-Id: Ibee1c18cfbe29a4de6c65075647ec3955d8206c0
- Remove vpxdec and vpxenc from the exclude list.
- vpx{dec,enc}.sh: Updates to support finding their executable when
LIBVPX_BIN_PATH is setup for the examples.
- tools_common.sh: New library function, vpx_tool_path(). Provides
support for finding the exectuables in vpx{dec,enc}.sh.
Change-Id: I730f11cceb44646491a7a7ff58603a4a760129ef
Explicitly makes the fileptr null when close source is called
on a temporary file. This avoids a valgrind error.
Change-Id: I9c364290eeb6842fde946dd9bf817814c7178aaa
Make sure VP9 frame-parallel decode passes all the standard
test vectors. Only test running with 2,3,4 threads now.
Also refactor the video decode test driver to support passing
in decode flags which is used to enable frame-parallel decode.
Change-Id: I6a712464232c2e13681634951c7e176312522e1e
check that bitrates increase with cqlevel at global test case teardown,
rather than after each individual test case. this allows the tests to be
run out of order with --gtest_shuffle.
Change-Id: I9e0d4e6a2d920a1f2fe9aee7b7876a3e7eb5d297
'ref_frame_map' is initialized to -1. avoids using an invalid index if
VP9_GET_REFERENCE/VP8_COPY_REFERENCE controls are issued after a decode
error.
Change-Id: I4599762c4d0b07a5943a72bf4a86ccb596cc062a
if the decode of the first frame fails, frame_to_show may not be set.
fixes a crash in vpxdec with corrupt data.
Change-Id: I5ab9476d005778a13fd42a39d05876bb6c90a93c
Reverts to using tmpfile() for non-Windows platforms. On google3
the test directory does not have write permissions, and hence the
Y4mWriteTest fails. This patch fixes the issue.
On Windows, a temporary file is created in the temp directory
that has write permissions.
The tests pass on linux, mingw, and MS visual studio.
Change-Id: Ibada1d80e25d8b8e5b6a9d3d597533674bd9024c
When a valid data pointer is given make sure the size is greater than
zero.
A previous check for vp9 was incorrectly removed in:
7050074 Make the api behavior conform to api spec.
No semantics for valid pointers + 0-sized frames are defined for VPx
codecs, so move the check to vpx_codec_decode(). This avoids an assert
in vp9.
+ add some basic invalid param testing for decoder init/decode/destroy
Change-Id: I99f9cef6076d15874fd72ac973f2685d8a2353c3
- Split vpxenc() into vpxenc() and vpxenc_pipe().
- Drop all but one positional param (the input file) in favor
of passing args directly to vpxenc.
- Add an extra lossless test that explicitly sets min-q and
max-q to 0.
Change-Id: I7d5f7b495f8b9447388c5f459bc9f6de2214caf2
