This patch modified struct VP9_COMP. Created a struct ThreadData
to include data that need to be copied for each thread. In
multiple thread case, one thread processes one tile. all threads
share one copy of VP9_COMP,
(refer to VP9_COMP *cpi in the code)
but each thread has its own copy of ThreadData,
(refer to ThreadData *td in the code).
Therefore, within the scope of encode_tiles(), both cpi and td
need to be passed as function parameters.
In single thread case, the FRAME_COUNTS pointer in ThreadData
points to "counts" in VP9_COMMON.
Change-Id: Ib37908b2d8e2c0f4f9c18f38017df5ce60e8b13e
This commit makes a non-RD coding mode decision process for key
frame coding. It can be optionally turned on in speed -6 and above.
Change-Id: I0847258b392877a0210b4768bef88ebc9ad009b5
In AQ1 a rate adjustment was applied for blocks coded with a
deltaq. This tends to skew the partition selection and cause
rate overshoot.
For example, consider a 64x64 super block where some but not all
sub blocks are in a low q segment and some are in a high q segment.
The choice of Q when considering large partition and transform sizes
is defined by the lowest sub block segment id (currently this implies the
lowest Q). If some parts of the larger partition are very hard this will
cause a high rate component.
The correct behavior here is for the rd code to discard the large partition
choice and break down to sub blocks where some have low and some
have high Q. However the rate correction factor above mask the high
cost of coding at a larger partition size.
Change-Id: Ie077edd0b1b43c094898f481df772ea280b35960
Add an additional restriction to bit/complexity based
segmentation based on spatial variance.
Only lower Q when both the number of bits spent
in the initial encoding pass and the spatial complexity are
below a threshold. This will prevent the low Q segments
being used just because there is a surfeit of bits.
Small metrics gains especially opsnr.
derf ~0.2% std-hd ~0.3%
Change-Id: I6a8496d466d673f9b0e2b2ca6304ea7b6d8e1cce
This is the first of a series of patches to restructure and
improve AQ mode 1 (variance based AQ).
Change-Id: Idcf693131a3ea2459dcfd957a54a65b971fa4a2a
The max_partition_size and max_partition_size are set at the
beginning while setting speed features, and then adjusted at
SB level. Moving them to mb struct ensures there is a local
copy for each thread.
Change-Id: I7dd08dc918d9f772fcd718bbd6533e0787720ad4
Several frame counters in encoder are updated at SB level. Combine
those counters and put them in a separate struct, which allows us
to allocate one copy for each thread.
Change-Id: I00366296a13c0ada4d8fa12f5e07728388b6cab7
Modified VP9_COMP struct to include MACROBLOCK *mb. This change
makes it feasible in multi-thread case to allocate a mb for each
thread.
Change-Id: I624d6d1aa9c132362200753e5d90b581b1738d6e
Two members in struct CYCLIC_REFRESH
int64_t projected_rate_sb;
int64_t projected_dist_sb;
are updated at the superblock level, which makes them shared data
in the multi-thread situation, and requires extra work to handle
them. However, those values are updated and used immediately, and
therefore can be removed. This patch cleaned up the code and
removed the two members.
Change-Id: I2c6ee4552bf49fb63ce590cdb47f9723974fffb1
This commit integrates the non-RD mode decision process and the
encoding process into a single recursion scheme.
Change-Id: I6a7e72a0b84d567554801ebbe01ec75d54c1f77d
This commit removes the cyclic aq mode dependency on
in_static_area and reworks the corresponding cut-off thresholds.
It improves the compression performance of speed -5 by 1.47% in
PSNR and 2.07% in SSIM, and the compression performance of speed
-6 by 3.10% in PSNR and 5.25% in SSIM. Speed wise, about 1% faster
in both settings at high bit-rates.
Change-Id: I1ffc775afdc047964448d9dff5751491ba4ff4a9
This will save a lot of memory for decoder due to removing of prev_mi,
but prev_mi is still needed in encoder. So this will increase a little bit
memory for encoder.
Change-Id: I24b2f1a423ebffa55a9bd2fcee1077dac995b2ed
This commit makes the inter prediction buffer system to support
hybrid partition search. It reduces the runtime of speed -5 by
about 3%. No compression performance change.
vidyo1 720p 1000 kbps
11831 ms -> 11497 ms
nik 720p 1000 kbps
10919 ms -> 10645 ms
Change-Id: I5b2da747c6395c253cd074d3907f5402e1840c36
The zero motion vector was effectively used in the subsampled pixel
based variance calculation. This commit makes it directly use zero
mv to generate prediction.
Change-Id: Ica83dc843e9f8da2f89c3ef451e50f16214c0def
This commit refactors the rate distortion structure used in the
non-RD coding mode and saves a few RDCOST calculations.
Change-Id: I62c3416c300d2c5372f21b96d93a6b633a34ab3a
Its functionality has been replaced with choose_partitioning and
threshold based control on split mode check.
Change-Id: Ic9bb321df06b524f5c38ea5874dc6f6a8f93c5e3
This speed feature has been deprecated in both yt and rtc coding
modes. This commit removes the related operations.
Change-Id: I079c79c6adafe45581af2ebf8b98faebcface1ce
This commit re-designs the recursive partition search scheme in
rtc speed -5. It first checks if the current block is under cyclic
refresh mode. If so, apply recursive partition search. Otherwise,
perform sub-sampled pixel based partition selection. When the
pre-selection finds the partition size should be 32x32 or above,
use the partition size directly. Otherwise, apply partition search
at nearby levels around the preset partition size.
It is enabled in speed -5. The compression performance of rtc
speed -5 is improved by 9.4%. Speed wise, the run-time goes slower
from 1% to 10%.
nik_720p, 1000 kbps
33220 b/f, 38.977 dB, 10109 ms -> 33200 b/f, 39.119 dB, 10210 ms
vidyo1_720p, 1000 kbps
16536 b/f, 40.495 dB, 10119 ms -> 16536 b/f, 40.827 dB, 11287 ms
Change-Id: I65adba352e3adc03bae50854ddaea1b421653c6c
Currently, the tokens for a tile are stored immediately after its
preceding tile, which causes a dependency. This is unnecessary
since we always allocate enough memory for tokens. Removing
the dependency allows token writing done in parallel. This patch
doesn't change encoding result.
Change-Id: I7365a6e5e2c2833eb14377c37e1503c9d0f26543
Compare the estimated rate and distortion to the thresholds scaled
according to the operating block size and determine if further
split partition search will be run. The compression performance of
speed -5 is changed by -0.074%. The encoding speed is 10% - 15%
faster.
vidyo1 720p
16545 b/f, 40.492 dB, 11475 ms -> 16535 b/f, 40.486 dB, 10100 ms
nik720p
16624 b/f, 36.310 dB, 10071 ms -> 16617 b/f, 36.313 dB, 8346 ms
Change-Id: Ic9197ab5761279ae55d2fb7813b2af0e0db497b8
Reduce the intra_cost_penalty for non-rd mode,
and some updates to VAR_BASED_PARTITION.
Visual tests show some improvement at Speed 6, for RTC clips.
Change-Id: If9090daf7aed14906a32d931a538ab544bbca606
This commit replaces the use of copy_partitioning with
choose_partitioning based on the sse of subsamped pixels, which
provides significantly better coding performance and runs at
similar speed, as compared to copy_partitioning. It improves rtc
speed 5 coding performance by 3%.
Change-Id: I52d3682a12dce0147f5e52383a594fc242ca3228
This commit makes a struct that contains rate value, distortion
value, and the rate-distortion cost. The goal is to provide a
better interface for rate-distortion related operation. It is
first used in rd_pick_partition and saves a few RDCOST calculations.
Change-Id: I1a6ab7b35282d3c80195af59b6810e577544691f
