Prior to this commit, both encoder and decoder reset mode/mv info from
previous frame in error resilient mode to ensure bitstreams are able to
decode when there is loss of frame in decoder side. However, this is
not necessary. This commit changed to remove the reset, so encoder can
continue to use mode/mv/partition information from previously encoded
frame without affecting decodeablilty under loss of frame.
Change-Id: I0279f862900dc647fb471ae3389770bb1b9f454f
Removes certain cases of feedback of active_worst_quality,
and removes it from the RATE_CONTROL structure. Now active
worst quality is expected to be computed locally in the
q picking function during the encode.
Making temporal filter strength depend on avg_frame_qindex
rather than on active_worst_quality actually improves
performance esp. for yt.
derf: +0.038%
yt: +0.359%
Change-Id: I1fe5a343034b55af9322289165321f00ac0827b1
In real time encoding, we enable encode_breakout to make encoding
fast. A speed feature "use_encode_breakout" is defined to set
encode_breakout thresholds for different speeds.
However, currently, static_thresh is an encoder option. The encode_
breakout can be turned off if user sets static_thresh=0 specifically.
The rtc set borg test result: (need to set --static_thresh=1)
speed -5, psnr loss -3.543%;
speed -4, psnr loss -2.358%;
speed -3, psnr loss -0.771%.
Encoding speed test:
speed -5, 11% - 60% speedup;
speed -4, 5.5% - 28% speedup;
speed -3, 0.8% - 7% speedup.
Change-Id: Icde592ffbe77eac7446f872a2e9eb2051733677b
Some parameter changes and fixes on one-pass rate control.
derfraw300 is now only 10% below 2-pass speed 0 rate control.
Change-Id: I1940eef8a5a035dc18e71b880d5e00cabd1f01b9
This CL changes libvpx to call a function when a frame buffer
is needed for decode. Libvpx will call a release callback when
no other frames reference the frame buffer. This CL adds a
default implementation of the frame buffer callbacks. Currently
only VP9 is supported. A future CL will add support for
applications to supply their own frame buffer callbacks.
Change-Id: I1405a320118f1cdd95f80c670d52b085a62cb10d
Function encode_rtc_frame_internal() and encode_frame_internal() only
differed by a couple of speed features, this commit relocation those
difference into the setup of speed features and merged two functions
into one to remove duplication.
It also fixed a subtle bug super_fast_rtc was used before it was
initialized.
Change-Id: I234a5a1d11a4450930e5b4943dbab434208d5030
-Properly set the average frame size for each layer.
-Allow each layer to update its average/last Q stats after encoding.
-Initialize for some layer context variables.
Change-Id: Iaa37d144fcf4f30ff4283a4e8db8b9ca8bf4c815
Fixes some of the parameters for 1-pass non-cbr mode.
Also includes some cleanups, inlcuding refactoring of the
recode_loop options.
Results on derfraw300 improve by about 5-6%, so that the one-pass
mode is now 13% below the 2-pass mode in speed 0.
Change-Id: I844cc2638694c7574f3be00d41d60b23dc1016f0
This patch adds a buffer-based rate control for temporal layers,
under CBR mode.
Added vpx_temporal_scalable_patters.c encoder for testing temporal
layers, for both vp9 and vp8 (replaces the old vp8_scalable_patterns).
Updated datarate unittest with tests for temporal layer rate-targeting.
Change-Id: I8900a854288b9354d9c697cfeb0243a9fd6790b1
Inlcudes a number cleanups:
1. Moves the one-pass pre-encode parameter setting functions
to vp9_ratectrl.c
2. Deprecates per_frame_bandwidth in RATE_CONTROL structure
3. Removes target_bandwidth in cpi structure since it is not used.
4. Various renaming of functions
There is no bit-stream change in 2-pass, one-pass cbr and one-pass
vbr modes.
Change-Id: Ifd9916bf4d485b7d04c5f52044ffe6703254ccbd
Moved a few features with low impact on compression form -5 to -4 and
increased adaptive_rd_thresh for -5.
Change-Id: Ib1b748168cc6ed7684ae4818499f3a536ae76253
This patch adds a buffer-based rate control for temporal layers,
under CBR mode.
Added vpx_temporal_scalable_patters.c encoder for testing temporal
layers, for both vp9 and vp8 (replaces the old vp8_scalable_patterns).
Updated datarate unittest with tests for temporal layer rate-targeting.
Change-Id: I9cb6cce2494390ae6096ee17774af7fb9308bde7
This commit added a logic to prevent the inter_filter type from being
changed if the default interp_filter mode is not switchable. Also, it
sets the default interp_filter to BILINEAR at very and super fast rtc
encoding modes
Change-Id: Ic41e6d31de29795a4ce536ec79afb01cab6daad3
--rt --cpu-used=-5 uses the progressive rtc mode
--rt --cpu-used=-6 uses the new super fast rtc mode
Change-Id: Id6469ca996100cdf794a0e42d76430161f22f976
When showing a previously decoded frame, i.e. when
show_existing_frame=1, the update of the
last_show_frame flag must be disabled.
This is to ensure that the last_show_frame flag
reflects the state of the flag for the immediately
previously decoded frame rather then the value that
was forced to ensure that a previously decoded frame
would be displayed.
This patch also adds a test vector to verify that the
display_existing_frame flag works as expected. Code
for generating the test vector can be found in this
patch:
https://gerrit.chromium.org/gerrit/#/c/68581/
(Bug originally reported by Alexander Voronov
<ru.xalba@gmail.com>).
Change-Id: I731d288fba02088959f7fcc87707137fffc6acf5
Some changes in 1ca1186 were mistakenly reverted by a later merge,
this commit re-instated the chanages from values to enums.
Change-Id: Ia6b01c31da584a1f612996e6432612c1295b9eaf
In this new mode, the size range is strictly determined by the min
and max partition size in neighborhood blocks.
Niklas720 encoding time at cpu-used -5 goes from 56250ms to 50676ms,
a 10% reduction.
Change-Id: I316b0e2ac967ff3fad57b28d69c0ec80b7d8b34e
Includes a few fixes and clean-ups that adds the ability
to use alt-ref frames in one-pass mode.
Whether alt-refs are actually used or not is controlled by a
macro USE_ALTREF_FOR_ONE_PASS in vp9_firstpass.c.
This first cut seems to improve derf by 15+% in 1-pass mode.
But further experiments with parameters are underway.
Change-Id: I78254421435478003367c788c7930d2dc4ee2816
This patch only works if the video is a width and height that are both
a multiple of 32.. It sets every partition to 16x16, and does INTRADC
only on the first frame and ZEROMV on every other frame. It always does
does the largest possible transform, and loop filter level is set to 4.
Was ~20% faster than speed -5 of vp8
Now 20% slower but adds motion search ( every block ), nearest, near
and zeromv
The SVC test was changed because - while this realtime mode produces
bad quality albeit quickly, it isn't obeying all the rules it should
about which frames are available.
Change-Id: I235c0b22573957986d41497dfb84568ec1dec8c7
